From adc82f77bee3487651f8ad253fb1c8a7bf4ec658 Mon Sep 17 00:00:00 2001 From: Ricardo Ribalda Delgado Date: Tue, 20 May 2014 18:30:03 +0200 Subject: usb: gadget: net2280: Add support for PLX USB338X This patch adds support for the PLX USB3380 and USB3382. This driver is based on the driver from the manufacturer. Since USB338X is register compatible with NET2280, I thought that it would be better to include this hardware into net2280 driver. Manufacturer's driver only supported the USB33X, did not follow the Kernel Style and contain some trivial errors. This patch has tried to address this issues. This patch has only been tested on USB338x hardware, but the merge has been done trying to not affect the behaviour of NET2280. Tested-by: Alan Stern Signed-off-by: Ricardo Ribalda Delgado Signed-off-by: Felipe Balbi --- include/linux/usb/usb338x.h | 199 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 199 insertions(+) create mode 100644 include/linux/usb/usb338x.h (limited to 'include/linux/usb') diff --git a/include/linux/usb/usb338x.h b/include/linux/usb/usb338x.h new file mode 100644 index 000000000000..f92eb635b9d3 --- /dev/null +++ b/include/linux/usb/usb338x.h @@ -0,0 +1,199 @@ +/* + * USB 338x super/high/full speed USB device controller. + * Unlike many such controllers, this one talks PCI. + * + * Copyright (C) 2002 NetChip Technology, Inc. (http://www.netchip.com) + * Copyright (C) 2003 David Brownell + * Copyright (C) 2014 Ricardo Ribalda - Qtechnology/AS + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __LINUX_USB_USB338X_H +#define __LINUX_USB_USB338X_H + +#include + +/* + * Extra defined bits for net2280 registers + */ +#define SCRATCH 0x0b + +#define DEFECT7374_FSM_FIELD 28 +#define SUPER_SPEED 8 +#define DMA_REQUEST_OUTSTANDING 5 +#define DMA_PAUSE_DONE_INTERRUPT 26 +#define SET_ISOCHRONOUS_DELAY 24 +#define SET_SEL 22 +#define SUPER_SPEED_MODE 8 + +/*ep_cfg*/ +#define MAX_BURST_SIZE 24 +#define EP_FIFO_BYTE_COUNT 16 +#define IN_ENDPOINT_ENABLE 14 +#define IN_ENDPOINT_TYPE 12 +#define OUT_ENDPOINT_ENABLE 10 +#define OUT_ENDPOINT_TYPE 8 + +struct usb338x_usb_ext_regs { + u32 usbclass; +#define DEVICE_PROTOCOL 16 +#define DEVICE_SUB_CLASS 8 +#define DEVICE_CLASS 0 + u32 ss_sel; +#define U2_SYSTEM_EXIT_LATENCY 8 +#define U1_SYSTEM_EXIT_LATENCY 0 + u32 ss_del; +#define U2_DEVICE_EXIT_LATENCY 8 +#define U1_DEVICE_EXIT_LATENCY 0 + u32 usb2lpm; +#define USB_L1_LPM_HIRD 2 +#define USB_L1_LPM_REMOTE_WAKE 1 +#define USB_L1_LPM_SUPPORT 0 + u32 usb3belt; +#define BELT_MULTIPLIER 10 +#define BEST_EFFORT_LATENCY_TOLERANCE 0 + u32 usbctl2; +#define LTM_ENABLE 7 +#define U2_ENABLE 6 +#define U1_ENABLE 5 +#define FUNCTION_SUSPEND 4 +#define USB3_CORE_ENABLE 3 +#define USB2_CORE_ENABLE 2 +#define SERIAL_NUMBER_STRING_ENABLE 0 + u32 in_timeout; +#define GPEP3_TIMEOUT 19 +#define GPEP2_TIMEOUT 18 +#define GPEP1_TIMEOUT 17 +#define GPEP0_TIMEOUT 16 +#define GPEP3_TIMEOUT_VALUE 13 +#define GPEP3_TIMEOUT_ENABLE 12 +#define GPEP2_TIMEOUT_VALUE 9 +#define GPEP2_TIMEOUT_ENABLE 8 +#define GPEP1_TIMEOUT_VALUE 5 +#define GPEP1_TIMEOUT_ENABLE 4 +#define GPEP0_TIMEOUT_VALUE 1 +#define GPEP0_TIMEOUT_ENABLE 0 + u32 isodelay; +#define ISOCHRONOUS_DELAY 0 +} __packed; + +struct usb338x_fifo_regs { + /* offset 0x0500, 0x0520, 0x0540, 0x0560, 0x0580 */ + u32 ep_fifo_size_base; +#define IN_FIFO_BASE_ADDRESS 22 +#define IN_FIFO_SIZE 16 +#define OUT_FIFO_BASE_ADDRESS 6 +#define OUT_FIFO_SIZE 0 + u32 ep_fifo_out_wrptr; + u32 ep_fifo_out_rdptr; + u32 ep_fifo_in_wrptr; + u32 ep_fifo_in_rdptr; + u32 unused[3]; +} __packed; + + +/* Link layer */ +struct usb338x_ll_regs { + /* offset 0x700 */ + u32 ll_ltssm_ctrl1; + u32 ll_ltssm_ctrl2; + u32 ll_ltssm_ctrl3; + u32 unused[2]; + u32 ll_general_ctrl0; + u32 ll_general_ctrl1; +#define PM_U3_AUTO_EXIT 29 +#define PM_U2_AUTO_EXIT 28 +#define PM_U1_AUTO_EXIT 27 +#define PM_FORCE_U2_ENTRY 26 +#define PM_FORCE_U1_ENTRY 25 +#define PM_LGO_COLLISION_SEND_LAU 24 +#define PM_DIR_LINK_REJECT 23 +#define PM_FORCE_LINK_ACCEPT 22 +#define PM_DIR_ENTRY_U3 20 +#define PM_DIR_ENTRY_U2 19 +#define PM_DIR_ENTRY_U1 18 +#define PM_U2_ENABLE 17 +#define PM_U1_ENABLE 16 +#define SKP_THRESHOLD_ADJUST_FMW 8 +#define RESEND_DPP_ON_LRTY_FMW 7 +#define DL_BIT_VALUE_FMW 6 +#define FORCE_DL_BIT 5 + u32 ll_general_ctrl2; +#define SELECT_INVERT_LANE_POLARITY 7 +#define FORCE_INVERT_LANE_POLARITY 6 + u32 ll_general_ctrl3; + u32 ll_general_ctrl4; + u32 ll_error_gen; +} __packed; + +struct usb338x_ll_lfps_regs { + /* offset 0x748 */ + u32 ll_lfps_5; +#define TIMER_LFPS_6US 16 + u32 ll_lfps_6; +#define TIMER_LFPS_80US 0 +} __packed; + +struct usb338x_ll_tsn_regs { + /* offset 0x77C */ + u32 ll_tsn_counters_2; +#define HOT_TX_NORESET_TS2 24 + u32 ll_tsn_counters_3; +#define HOT_RX_RESET_TS2 0 +} __packed; + +struct usb338x_ll_chi_regs { + /* offset 0x79C */ + u32 ll_tsn_chicken_bit; +#define RECOVERY_IDLE_TO_RECOVER_FMW 3 +} __packed; + +/* protocol layer */ +struct usb338x_pl_regs { + /* offset 0x800 */ + u32 pl_reg_1; + u32 pl_reg_2; + u32 pl_reg_3; + u32 pl_reg_4; + u32 pl_ep_ctrl; + /* Protocol Layer Endpoint Control*/ +#define PL_EP_CTRL 0x810 +#define ENDPOINT_SELECT 0 + /* [4:0] */ +#define EP_INITIALIZED 16 +#define SEQUENCE_NUMBER_RESET 17 +#define CLEAR_ACK_ERROR_CODE 20 + u32 pl_reg_6; + u32 pl_reg_7; + u32 pl_reg_8; + u32 pl_ep_status_1; + /* Protocol Layer Endpoint Status 1*/ +#define PL_EP_STATUS_1 0x820 +#define STATE 16 +#define ACK_GOOD_NORMAL 0x11 +#define ACK_GOOD_MORE_ACKS_TO_COME 0x16 + u32 pl_ep_status_2; + u32 pl_ep_status_3; + /* Protocol Layer Endpoint Status 3*/ +#define PL_EP_STATUS_3 0x828 +#define SEQUENCE_NUMBER 0 + u32 pl_ep_status_4; + /* Protocol Layer Endpoint Status 4*/ +#define PL_EP_STATUS_4 0x82c + u32 pl_ep_cfg_4; + /* Protocol Layer Endpoint Configuration 4*/ +#define PL_EP_CFG_4 0x830 +#define NON_CTRL_IN_TOLERATE_BAD_DIR 6 +} __packed; + +#endif /* __LINUX_USB_USB338X_H */ -- cgit v1.2.3 From 7ec3ea181d8cffb669982d79664f119ef6a71fc3 Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Wed, 9 Jul 2014 18:09:55 +0200 Subject: usb: gadget: Add helper macro for usb_composite_driver boilerplate Introduce the module_usb_composite_driver macro as a convenience macro for USB gadget composite driver modules, similar to module_usb_driver. It is intended to be used by drivers which init/exit section does nothing but calling usb_composite_probe/usb_composite_unrregister. By using this macro it is possible to eliminate a few lines of boilerplate code per USB gadget composite driver. Based on f3a6a4b6 ("USB: Add helper macro for usb_driver boilerplate") which introduced the according macro for USB drivers. Signed-off-by: Tobias Klauser Signed-off-by: Felipe Balbi --- include/linux/usb/composite.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'include/linux/usb') diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h index 7373203140e7..c330f5ef42cf 100644 --- a/include/linux/usb/composite.h +++ b/include/linux/usb/composite.h @@ -386,6 +386,21 @@ struct usb_composite_driver { extern int usb_composite_probe(struct usb_composite_driver *driver); extern void usb_composite_unregister(struct usb_composite_driver *driver); + +/** + * module_usb_composite_driver() - Helper macro for registering a USB gadget + * composite driver + * @__usb_composite_driver: usb_composite_driver struct + * + * Helper macro for USB gadget composite drivers which do not do anything + * special in module init/exit. This eliminates a lot of boilerplate. Each + * module may only use this macro once, and calling it replaces module_init() + * and module_exit() + */ +#define module_usb_composite_driver(__usb_composite_driver) \ + module_driver(__usb_composite_driver, usb_composite_probe, \ + usb_composite_unregister) + extern void usb_composite_setup_continue(struct usb_composite_dev *cdev); extern int composite_dev_prepare(struct usb_composite_driver *composite, struct usb_composite_dev *cdev); -- cgit v1.2.3 From 8ecef00fe1f33658ee36e902dba6850b51312073 Mon Sep 17 00:00:00 2001 From: Ulrich Hecht Date: Thu, 10 Jul 2014 09:53:59 +0200 Subject: usb: renesas_usbhs: add R-Car Gen. 2 init and power control In preparation for DT conversion to reduce reliance on platform device callbacks. Signed-off-by: Ulrich Hecht Signed-off-by: Felipe Balbi --- drivers/usb/renesas_usbhs/Makefile | 2 +- drivers/usb/renesas_usbhs/common.c | 66 +++++++++++++++++++++++++++++--- drivers/usb/renesas_usbhs/common.h | 2 + drivers/usb/renesas_usbhs/rcar2.c | 77 ++++++++++++++++++++++++++++++++++++++ drivers/usb/renesas_usbhs/rcar2.h | 4 ++ include/linux/usb/renesas_usbhs.h | 6 +++ 6 files changed, 151 insertions(+), 6 deletions(-) create mode 100644 drivers/usb/renesas_usbhs/rcar2.c create mode 100644 drivers/usb/renesas_usbhs/rcar2.h (limited to 'include/linux/usb') diff --git a/drivers/usb/renesas_usbhs/Makefile b/drivers/usb/renesas_usbhs/Makefile index bc8aef4311a1..9e47f477b6d2 100644 --- a/drivers/usb/renesas_usbhs/Makefile +++ b/drivers/usb/renesas_usbhs/Makefile @@ -4,7 +4,7 @@ obj-$(CONFIG_USB_RENESAS_USBHS) += renesas_usbhs.o -renesas_usbhs-y := common.o mod.o pipe.o fifo.o +renesas_usbhs-y := common.o mod.o pipe.o fifo.o rcar2.o ifneq ($(CONFIG_USB_RENESAS_USBHS_HCD),) renesas_usbhs-y += mod_host.o diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c index 17267b0a2e95..1b9bf8d83235 100644 --- a/drivers/usb/renesas_usbhs/common.c +++ b/drivers/usb/renesas_usbhs/common.c @@ -15,12 +15,14 @@ * */ #include +#include #include #include #include #include #include #include "common.h" +#include "rcar2.h" /* * image of renesas_usbhs @@ -284,6 +286,8 @@ static void usbhsc_set_buswait(struct usbhs_priv *priv) /* * platform default param */ + +/* commonly used on old SH-Mobile SoCs */ static u32 usbhsc_default_pipe_type[] = { USB_ENDPOINT_XFER_CONTROL, USB_ENDPOINT_XFER_ISOC, @@ -297,6 +301,26 @@ static u32 usbhsc_default_pipe_type[] = { USB_ENDPOINT_XFER_INT, }; +/* commonly used on newer SH-Mobile and R-Car SoCs */ +static u32 usbhsc_new_pipe_type[] = { + USB_ENDPOINT_XFER_CONTROL, + USB_ENDPOINT_XFER_ISOC, + USB_ENDPOINT_XFER_ISOC, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_INT, + USB_ENDPOINT_XFER_INT, + USB_ENDPOINT_XFER_INT, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_BULK, +}; + /* * power control */ @@ -423,8 +447,7 @@ static int usbhs_probe(struct platform_device *pdev) int ret; /* check platform information */ - if (!info || - !info->platform_callback.get_id) { + if (!info) { dev_err(&pdev->dev, "no platform information\n"); return -EINVAL; } @@ -451,13 +474,32 @@ static int usbhs_probe(struct platform_device *pdev) /* * care platform info */ - memcpy(&priv->pfunc, - &info->platform_callback, - sizeof(struct renesas_usbhs_platform_callback)); + memcpy(&priv->dparam, &info->driver_param, sizeof(struct renesas_usbhs_driver_param)); + switch (priv->dparam.type) { + case USBHS_TYPE_R8A7790: + case USBHS_TYPE_R8A7791: + priv->pfunc = usbhs_rcar2_ops; + if (!priv->dparam.pipe_type) { + priv->dparam.pipe_type = usbhsc_new_pipe_type; + priv->dparam.pipe_size = + ARRAY_SIZE(usbhsc_new_pipe_type); + } + break; + default: + if (!info->platform_callback.get_id) { + dev_err(&pdev->dev, "no platform callbacks"); + return -EINVAL; + } + memcpy(&priv->pfunc, + &info->platform_callback, + sizeof(struct renesas_usbhs_platform_callback)); + break; + } + /* set driver callback functions for platform */ dfunc = &info->driver_callback; dfunc->notify_hotplug = usbhsc_drvcllbck_notify_hotplug; @@ -507,6 +549,20 @@ static int usbhs_probe(struct platform_device *pdev) */ usbhs_sys_clock_ctrl(priv, 0); + /* check GPIO determining if USB function should be enabled */ + if (priv->dparam.enable_gpio) { + gpio_request_one(priv->dparam.enable_gpio, GPIOF_IN, NULL); + ret = !gpio_get_value(priv->dparam.enable_gpio); + gpio_free(priv->dparam.enable_gpio); + if (ret) { + dev_warn(&pdev->dev, + "USB function not selected (GPIO %d)\n", + priv->dparam.enable_gpio); + ret = -ENOTSUPP; + goto probe_end_mod_exit; + } + } + /* * platform call * diff --git a/drivers/usb/renesas_usbhs/common.h b/drivers/usb/renesas_usbhs/common.h index c69dd2fba360..a7996da6a1bd 100644 --- a/drivers/usb/renesas_usbhs/common.h +++ b/drivers/usb/renesas_usbhs/common.h @@ -268,6 +268,8 @@ struct usbhs_priv { * fifo control */ struct usbhs_fifo_info fifo_info; + + struct usb_phy *phy; }; /* diff --git a/drivers/usb/renesas_usbhs/rcar2.c b/drivers/usb/renesas_usbhs/rcar2.c new file mode 100644 index 000000000000..e6b9dcc1c289 --- /dev/null +++ b/drivers/usb/renesas_usbhs/rcar2.c @@ -0,0 +1,77 @@ +/* + * Renesas USB driver R-Car Gen. 2 initialization and power control + * + * Copyright (C) 2014 Ulrich Hecht + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include "common.h" +#include "rcar2.h" + +static int usbhs_rcar2_hardware_init(struct platform_device *pdev) +{ + struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev); + struct usb_phy *phy; + + phy = usb_get_phy_dev(&pdev->dev, 0); + if (IS_ERR(phy)) + return PTR_ERR(phy); + + priv->phy = phy; + return 0; +} + +static int usbhs_rcar2_hardware_exit(struct platform_device *pdev) +{ + struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev); + + if (!priv->phy) + return 0; + + usb_put_phy(priv->phy); + priv->phy = NULL; + + return 0; +} + +static int usbhs_rcar2_power_ctrl(struct platform_device *pdev, + void __iomem *base, int enable) +{ + struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev); + + if (!priv->phy) + return -ENODEV; + + if (enable) { + int retval = usb_phy_init(priv->phy); + + if (!retval) + retval = usb_phy_set_suspend(priv->phy, 0); + return retval; + } + + usb_phy_set_suspend(priv->phy, 1); + usb_phy_shutdown(priv->phy); + return 0; +} + +static int usbhs_rcar2_get_id(struct platform_device *pdev) +{ + return USBHS_GADGET; +} + +const struct renesas_usbhs_platform_callback usbhs_rcar2_ops = { + .hardware_init = usbhs_rcar2_hardware_init, + .hardware_exit = usbhs_rcar2_hardware_exit, + .power_ctrl = usbhs_rcar2_power_ctrl, + .get_id = usbhs_rcar2_get_id, +}; diff --git a/drivers/usb/renesas_usbhs/rcar2.h b/drivers/usb/renesas_usbhs/rcar2.h new file mode 100644 index 000000000000..f07f10d9b3b2 --- /dev/null +++ b/drivers/usb/renesas_usbhs/rcar2.h @@ -0,0 +1,4 @@ +#include "common.h" + +extern const struct renesas_usbhs_platform_callback + usbhs_rcar2_ops; diff --git a/include/linux/usb/renesas_usbhs.h b/include/linux/usb/renesas_usbhs.h index e452ba6ec6bd..d5952bb66752 100644 --- a/include/linux/usb/renesas_usbhs.h +++ b/include/linux/usb/renesas_usbhs.h @@ -153,6 +153,9 @@ struct renesas_usbhs_driver_param { */ int pio_dma_border; /* default is 64byte */ + u32 type; + u32 enable_gpio; + /* * option: */ @@ -160,6 +163,9 @@ struct renesas_usbhs_driver_param { u32 has_sudmac:1; /* for SUDMAC */ }; +#define USBHS_TYPE_R8A7790 1 +#define USBHS_TYPE_R8A7791 2 + /* * option: * -- cgit v1.2.3