From f4c6cd1a7f2275d5bc0e494b21fff26f8dde80f0 Mon Sep 17 00:00:00 2001 From: Miquel Raynal Date: Wed, 24 Jan 2018 23:49:31 +0100 Subject: mtd: nand: sunxi: Fix ECC strength choice When the requested ECC strength does not exactly match the strengths supported by the ECC engine, the driver is selecting the closest strength meeting the 'selected_strength > requested_strength' constraint. Fix the fact that, in this particular case, ecc->strength value was not updated to match the 'selected_strength'. For instance, one can encounter this issue when no ECC requirement is filled in the device tree while the NAND chip minimum requirement is not a strength/step_size combo natively supported by the ECC engine. Fixes: 1fef62c1423b ("mtd: nand: add sunxi NAND flash controller support") Cc: Suggested-by: Boris Brezillon Signed-off-by: Miquel Raynal Signed-off-by: Boris Brezillon --- drivers/mtd/nand/sunxi_nand.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c index 2275fbedfb2a..f5a55c63935c 100644 --- a/drivers/mtd/nand/sunxi_nand.c +++ b/drivers/mtd/nand/sunxi_nand.c @@ -1858,8 +1858,14 @@ static int sunxi_nand_hw_common_ecc_ctrl_init(struct mtd_info *mtd, /* Add ECC info retrieval from DT */ for (i = 0; i < ARRAY_SIZE(strengths); i++) { - if (ecc->strength <= strengths[i]) + if (ecc->strength <= strengths[i]) { + /* + * Update ecc->strength value with the actual strength + * that will be used by the ECC engine. + */ + ecc->strength = strengths[i]; break; + } } if (i >= ARRAY_SIZE(strengths)) { -- cgit v1.2.3