From 43b6bf406cd0319e522638f97c9086b7beebaeaa Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 21 Oct 2020 12:45:13 +0200 Subject: spi: imx: fix runtime pm support for !CONFIG_PM 525c9e5a32bd introduced pm_runtime support for the i.MX SPI driver. With this pm_runtime is used to bring up the clocks initially. When CONFIG_PM is disabled the clocks are no longer enabled and the driver doesn't work anymore. Fix this by enabling the clocks in the probe function and telling pm_runtime that the device is active using pm_runtime_set_active(). Fixes: 525c9e5a32bd spi: imx: enable runtime pm support Tested-by: Christian Eggers [tested for !CONFIG_PM only] Signed-off-by: Sascha Hauer Link: https://lore.kernel.org/r/20201021104513.21560-1-s.hauer@pengutronix.de Signed-off-by: Mark Brown --- drivers/spi/spi-imx.c | 23 +++++++++++++++-------- 1 file changed, 15 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index 5158c48bd4db..95be1b20af32 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -1676,15 +1676,18 @@ static int spi_imx_probe(struct platform_device *pdev) goto out_master_put; } - pm_runtime_enable(spi_imx->dev); + ret = clk_prepare_enable(spi_imx->clk_per); + if (ret) + goto out_master_put; + + ret = clk_prepare_enable(spi_imx->clk_ipg); + if (ret) + goto out_put_per; + pm_runtime_set_autosuspend_delay(spi_imx->dev, MXC_RPM_TIMEOUT); pm_runtime_use_autosuspend(spi_imx->dev); - - ret = pm_runtime_get_sync(spi_imx->dev); - if (ret < 0) { - dev_err(spi_imx->dev, "failed to enable clock\n"); - goto out_runtime_pm_put; - } + pm_runtime_set_active(spi_imx->dev); + pm_runtime_enable(spi_imx->dev); spi_imx->spi_clk = clk_get_rate(spi_imx->clk_per); /* @@ -1719,8 +1722,12 @@ static int spi_imx_probe(struct platform_device *pdev) out_runtime_pm_put: pm_runtime_dont_use_autosuspend(spi_imx->dev); - pm_runtime_put_sync(spi_imx->dev); + pm_runtime_set_suspended(&pdev->dev); pm_runtime_disable(spi_imx->dev); + + clk_disable_unprepare(spi_imx->clk_ipg); +out_put_per: + clk_disable_unprepare(spi_imx->clk_per); out_master_put: spi_master_put(master); -- cgit v1.2.3 From 5e31ba0c0543a04483b53151eb5b7413efece94c Mon Sep 17 00:00:00 2001 From: Martin Hundebøll Date: Wed, 14 Oct 2020 11:02:30 +0200 Subject: spi: bcm2835: fix gpio cs level inversion MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The work on improving gpio chip-select in spi core, and the following fixes, has caused the bcm2835 spi driver to use wrong levels. Fix this by simply removing level handling in the bcm2835 driver, and let the core do its work. Fixes: 3e5ec1db8bfe ("spi: Fix SPI_CS_HIGH setting when using native and GPIO CS") Cc: Signed-off-by: Martin Hundebøll Link: https://lore.kernel.org/r/20201014090230.2706810-1-martin@geanix.com Signed-off-by: Mark Brown --- drivers/spi/spi-bcm2835.c | 12 ------------ 1 file changed, 12 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c index b87116e9b413..9b6ba94fe878 100644 --- a/drivers/spi/spi-bcm2835.c +++ b/drivers/spi/spi-bcm2835.c @@ -1259,18 +1259,6 @@ static int bcm2835_spi_setup(struct spi_device *spi) if (!chip) return 0; - /* - * Retrieve the corresponding GPIO line used for CS. - * The inversion semantics will be handled by the GPIO core - * code, so we pass GPIOD_OUT_LOW for "unasserted" and - * the correct flag for inversion semantics. The SPI_CS_HIGH - * on spi->mode cannot be checked for polarity in this case - * as the flag use_gpio_descriptors enforces SPI_CS_HIGH. - */ - if (of_property_read_bool(spi->dev.of_node, "spi-cs-high")) - lflags = GPIO_ACTIVE_HIGH; - else - lflags = GPIO_ACTIVE_LOW; spi->cs_gpiod = gpiochip_request_own_desc(chip, 8 - spi->chip_select, DRV_NAME, lflags, -- cgit v1.2.3 From 9bd77a9ce31dd242fece27219d14fbee5068dd85 Mon Sep 17 00:00:00 2001 From: Zhao Qiang Date: Tue, 3 Nov 2020 10:05:46 +0800 Subject: spi: fsl-dspi: fix wrong pointer in suspend/resume Since commit 530b5affc675 ("spi: fsl-dspi: fix use-after-free in remove path"), this driver causes a "NULL pointer dereference" in dspi_suspend/resume. This is because since this commit, the drivers private data point to "dspi" instead of "ctlr", the codes in suspend and resume func were not modified correspondly. Fixes: 530b5affc675 ("spi: fsl-dspi: fix use-after-free in remove path") Signed-off-by: Zhao Qiang Reviewed-by: Vladimir Oltean Link: https://lore.kernel.org/r/20201103020546.1822-1-qiang.zhao@nxp.com Signed-off-by: Mark Brown --- drivers/spi/spi-fsl-dspi.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c index 3967afa465f0..1a08c1d584ab 100644 --- a/drivers/spi/spi-fsl-dspi.c +++ b/drivers/spi/spi-fsl-dspi.c @@ -1080,12 +1080,11 @@ MODULE_DEVICE_TABLE(of, fsl_dspi_dt_ids); #ifdef CONFIG_PM_SLEEP static int dspi_suspend(struct device *dev) { - struct spi_controller *ctlr = dev_get_drvdata(dev); - struct fsl_dspi *dspi = spi_controller_get_devdata(ctlr); + struct fsl_dspi *dspi = dev_get_drvdata(dev); if (dspi->irq) disable_irq(dspi->irq); - spi_controller_suspend(ctlr); + spi_controller_suspend(dspi->ctlr); clk_disable_unprepare(dspi->clk); pinctrl_pm_select_sleep_state(dev); @@ -1095,8 +1094,7 @@ static int dspi_suspend(struct device *dev) static int dspi_resume(struct device *dev) { - struct spi_controller *ctlr = dev_get_drvdata(dev); - struct fsl_dspi *dspi = spi_controller_get_devdata(ctlr); + struct fsl_dspi *dspi = dev_get_drvdata(dev); int ret; pinctrl_pm_select_default_state(dev); @@ -1104,7 +1102,7 @@ static int dspi_resume(struct device *dev) ret = clk_prepare_enable(dspi->clk); if (ret) return ret; - spi_controller_resume(ctlr); + spi_controller_resume(dspi->ctlr); if (dspi->irq) enable_irq(dspi->irq); -- cgit v1.2.3