From 5aad724280b9f8ffff3a55311ef0ba35ebb4099a Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Thu, 6 Jan 2011 16:59:36 -0300 Subject: [media] rc: fix up and genericize some time unit conversions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The ene_ir driver was using a private define of MS_TO_NS, which is meant to be microseconds to nanoseconds. The mceusb driver copied it, intending to use is a milliseconds to microseconds. Lets move the defines to a common location, expand and standardize them a touch, so that we now have: MS_TO_NS - milliseconds to nanoseconds MS_TO_US - milliseconds to microseconds US_TO_NS - microseconds to nanoseconds Reported-by: David Härdeman CC: Maxim Levitsky Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/ene_ir.c | 16 ++++++++-------- drivers/media/rc/ene_ir.h | 2 -- drivers/media/rc/mceusb.c | 7 +++---- 3 files changed, 11 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/media/rc/ene_ir.c b/drivers/media/rc/ene_ir.c index 885abdddfaa8..1ac49139158d 100644 --- a/drivers/media/rc/ene_ir.c +++ b/drivers/media/rc/ene_ir.c @@ -446,27 +446,27 @@ static void ene_rx_setup(struct ene_device *dev) select_timeout: if (dev->rx_fan_input_inuse) { - dev->rdev->rx_resolution = MS_TO_NS(ENE_FW_SAMPLE_PERIOD_FAN); + dev->rdev->rx_resolution = US_TO_NS(ENE_FW_SAMPLE_PERIOD_FAN); /* Fan input doesn't support timeouts, it just ends the input with a maximum sample */ dev->rdev->min_timeout = dev->rdev->max_timeout = - MS_TO_NS(ENE_FW_SMPL_BUF_FAN_MSK * + US_TO_NS(ENE_FW_SMPL_BUF_FAN_MSK * ENE_FW_SAMPLE_PERIOD_FAN); } else { - dev->rdev->rx_resolution = MS_TO_NS(sample_period); + dev->rdev->rx_resolution = US_TO_NS(sample_period); /* Theoreticly timeout is unlimited, but we cap it * because it was seen that on one device, it * would stop sending spaces after around 250 msec. * Besides, this is close to 2^32 anyway and timeout is u32. */ - dev->rdev->min_timeout = MS_TO_NS(127 * sample_period); - dev->rdev->max_timeout = MS_TO_NS(200000); + dev->rdev->min_timeout = US_TO_NS(127 * sample_period); + dev->rdev->max_timeout = US_TO_NS(200000); } if (dev->hw_learning_and_tx_capable) - dev->rdev->tx_resolution = MS_TO_NS(sample_period); + dev->rdev->tx_resolution = US_TO_NS(sample_period); if (dev->rdev->timeout > dev->rdev->max_timeout) dev->rdev->timeout = dev->rdev->max_timeout; @@ -801,7 +801,7 @@ static irqreturn_t ene_isr(int irq, void *data) dbg("RX: %d (%s)", hw_sample, pulse ? "pulse" : "space"); - ev.duration = MS_TO_NS(hw_sample); + ev.duration = US_TO_NS(hw_sample); ev.pulse = pulse; ir_raw_event_store_with_filter(dev->rdev, &ev); } @@ -821,7 +821,7 @@ static void ene_setup_default_settings(struct ene_device *dev) dev->learning_mode_enabled = learning_mode_force; /* Set reasonable default timeout */ - dev->rdev->timeout = MS_TO_NS(150000); + dev->rdev->timeout = US_TO_NS(150000); } /* Upload all hardware settings at once. Used at load and resume time */ diff --git a/drivers/media/rc/ene_ir.h b/drivers/media/rc/ene_ir.h index c179baf34cb4..337a41d4450b 100644 --- a/drivers/media/rc/ene_ir.h +++ b/drivers/media/rc/ene_ir.h @@ -201,8 +201,6 @@ #define dbg_verbose(format, ...) __dbg(2, format, ## __VA_ARGS__) #define dbg_regs(format, ...) __dbg(3, format, ## __VA_ARGS__) -#define MS_TO_NS(msec) ((msec) * 1000) - struct ene_device { struct pnp_dev *pnp_dev; struct rc_dev *rdev; diff --git a/drivers/media/rc/mceusb.c b/drivers/media/rc/mceusb.c index 0fef6efad537..2d9113493cf0 100644 --- a/drivers/media/rc/mceusb.c +++ b/drivers/media/rc/mceusb.c @@ -48,7 +48,6 @@ #define USB_BUFLEN 32 /* USB reception buffer length */ #define USB_CTRL_MSG_SZ 2 /* Size of usb ctrl msg on gen1 hw */ #define MCE_G1_INIT_MSGS 40 /* Init messages on gen1 hw to throw out */ -#define MS_TO_NS(msec) ((msec) * 1000) /* MCE constants */ #define MCE_CMDBUF_SIZE 384 /* MCE Command buffer length */ @@ -817,7 +816,7 @@ static void mceusb_handle_command(struct mceusb_dev *ir, int index) switch (ir->buf_in[index]) { /* 2-byte return value commands */ case MCE_CMD_S_TIMEOUT: - ir->rc->timeout = MS_TO_NS((hi << 8 | lo) / 2); + ir->rc->timeout = MS_TO_US((hi << 8 | lo) / 2); break; /* 1-byte return value commands */ @@ -858,7 +857,7 @@ static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len) ir->rem--; rawir.pulse = ((ir->buf_in[i] & MCE_PULSE_BIT) != 0); rawir.duration = (ir->buf_in[i] & MCE_PULSE_MASK) - * MS_TO_NS(MCE_TIME_UNIT); + * MS_TO_US(MCE_TIME_UNIT); dev_dbg(ir->dev, "Storing %s with duration %d\n", rawir.pulse ? "pulse" : "space", @@ -1061,7 +1060,7 @@ static struct rc_dev *mceusb_init_rc_dev(struct mceusb_dev *ir) rc->priv = ir; rc->driver_type = RC_DRIVER_IR_RAW; rc->allowed_protos = RC_TYPE_ALL; - rc->timeout = MS_TO_NS(1000); + rc->timeout = MS_TO_US(1000); if (!ir->flags.no_tx) { rc->s_tx_mask = mceusb_set_tx_mask; rc->s_tx_carrier = mceusb_set_tx_carrier; -- cgit v1.2.3