From de6efe0a966cf86b3c4039a610b2d4157db707f2 Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Wed, 30 Mar 2011 23:09:52 +0800 Subject: spi/dw_spi: unify the low level read/write routines The original version has many duplicated codes for null/u8/u16 case, so unify them to make it cleaner Signed-off-by: Feng Tang Signed-off-by: Grant Likely --- drivers/spi/dw_spi.c | 103 +++++++++++++-------------------------------------- drivers/spi/dw_spi.h | 2 - 2 files changed, 26 insertions(+), 79 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/dw_spi.c b/drivers/spi/dw_spi.c index 9a6196461b27..c4fca3d9d45f 100644 --- a/drivers/spi/dw_spi.c +++ b/drivers/spi/dw_spi.c @@ -58,8 +58,6 @@ struct chip_data { u8 bits_per_word; u16 clk_div; /* baud rate divider */ u32 speed_hz; /* baud rate */ - int (*write)(struct dw_spi *dws); - int (*read)(struct dw_spi *dws); void (*cs_control)(u32 command); }; @@ -185,80 +183,45 @@ static void flush(struct dw_spi *dws) wait_till_not_busy(dws); } -static int null_writer(struct dw_spi *dws) -{ - u8 n_bytes = dws->n_bytes; - - if (!(dw_readw(dws, sr) & SR_TF_NOT_FULL) - || (dws->tx == dws->tx_end)) - return 0; - dw_writew(dws, dr, 0); - dws->tx += n_bytes; - wait_till_not_busy(dws); - return 1; -} - -static int null_reader(struct dw_spi *dws) +static int dw_writer(struct dw_spi *dws) { - u8 n_bytes = dws->n_bytes; + u16 txw = 0; - while ((dw_readw(dws, sr) & SR_RF_NOT_EMPT) - && (dws->rx < dws->rx_end)) { - dw_readw(dws, dr); - dws->rx += n_bytes; - } - wait_till_not_busy(dws); - return dws->rx == dws->rx_end; -} - -static int u8_writer(struct dw_spi *dws) -{ if (!(dw_readw(dws, sr) & SR_TF_NOT_FULL) || (dws->tx == dws->tx_end)) return 0; - dw_writew(dws, dr, *(u8 *)(dws->tx)); - ++dws->tx; - - wait_till_not_busy(dws); - return 1; -} - -static int u8_reader(struct dw_spi *dws) -{ - while ((dw_readw(dws, sr) & SR_RF_NOT_EMPT) - && (dws->rx < dws->rx_end)) { - *(u8 *)(dws->rx) = dw_readw(dws, dr); - ++dws->rx; + /* Set the tx word if the transfer's original "tx" is not null */ + if (dws->tx_end - dws->len) { + if (dws->n_bytes == 1) + txw = *(u8 *)(dws->tx); + else + txw = *(u16 *)(dws->tx); } - wait_till_not_busy(dws); - return dws->rx == dws->rx_end; -} - -static int u16_writer(struct dw_spi *dws) -{ - if (!(dw_readw(dws, sr) & SR_TF_NOT_FULL) - || (dws->tx == dws->tx_end)) - return 0; - - dw_writew(dws, dr, *(u16 *)(dws->tx)); - dws->tx += 2; + dw_writew(dws, dr, txw); + dws->tx += dws->n_bytes; wait_till_not_busy(dws); return 1; } -static int u16_reader(struct dw_spi *dws) +static int dw_reader(struct dw_spi *dws) { - u16 temp; + u16 rxw; while ((dw_readw(dws, sr) & SR_RF_NOT_EMPT) && (dws->rx < dws->rx_end)) { - temp = dw_readw(dws, dr); - *(u16 *)(dws->rx) = temp; - dws->rx += 2; + rxw = dw_readw(dws, dr); + /* Care rx only if the transfer's original "rx" is not null */ + if (dws->rx_end - dws->len) { + if (dws->n_bytes == 1) + *(u8 *)(dws->rx) = rxw; + else + *(u16 *)(dws->rx) = rxw; + } + dws->rx += dws->n_bytes; } wait_till_not_busy(dws); @@ -383,8 +346,8 @@ static irqreturn_t interrupt_transfer(struct dw_spi *dws) left = (left > int_level) ? int_level : left; while (left--) - dws->write(dws); - dws->read(dws); + dw_writer(dws); + dw_reader(dws); /* Re-enable the IRQ if there is still data left to tx */ if (dws->tx_end > dws->tx) @@ -417,13 +380,13 @@ static irqreturn_t dw_spi_irq(int irq, void *dev_id) /* Must be called inside pump_transfers() */ static void poll_transfer(struct dw_spi *dws) { - while (dws->write(dws)) - dws->read(dws); + while (dw_writer(dws)) + dw_reader(dws); /* * There is a possibility that the last word of a transaction * will be lost if data is not ready. Re-read to solve this issue. */ - dws->read(dws); + dw_reader(dws); dw_spi_xfer_done(dws); } @@ -483,8 +446,6 @@ static void pump_transfers(unsigned long data) dws->tx_end = dws->tx + transfer->len; dws->rx = transfer->rx_buf; dws->rx_end = dws->rx + transfer->len; - dws->write = dws->tx ? chip->write : null_writer; - dws->read = dws->rx ? chip->read : null_reader; dws->cs_change = transfer->cs_change; dws->len = dws->cur_transfer->len; if (chip != dws->prev_chip) @@ -520,18 +481,10 @@ static void pump_transfers(unsigned long data) case 8: dws->n_bytes = 1; dws->dma_width = 1; - dws->read = (dws->read != null_reader) ? - u8_reader : null_reader; - dws->write = (dws->write != null_writer) ? - u8_writer : null_writer; break; case 16: dws->n_bytes = 2; dws->dma_width = 2; - dws->read = (dws->read != null_reader) ? - u16_reader : null_reader; - dws->write = (dws->write != null_writer) ? - u16_writer : null_writer; break; default: printk(KERN_ERR "MRST SPI0: unsupported bits:" @@ -733,13 +686,9 @@ static int dw_spi_setup(struct spi_device *spi) if (spi->bits_per_word <= 8) { chip->n_bytes = 1; chip->dma_width = 1; - chip->read = u8_reader; - chip->write = u8_writer; } else if (spi->bits_per_word <= 16) { chip->n_bytes = 2; chip->dma_width = 2; - chip->read = u16_reader; - chip->write = u16_writer; } else { /* Never take >16b case for MRST SPIC */ dev_err(&spi->dev, "invalid wordsize\n"); diff --git a/drivers/spi/dw_spi.h b/drivers/spi/dw_spi.h index fb0bce564844..d8aac1f4c546 100644 --- a/drivers/spi/dw_spi.h +++ b/drivers/spi/dw_spi.h @@ -137,8 +137,6 @@ struct dw_spi { u8 max_bits_per_word; /* maxim is 16b */ u32 dma_width; int cs_change; - int (*write)(struct dw_spi *dws); - int (*read)(struct dw_spi *dws); irqreturn_t (*transfer_handler)(struct dw_spi *dws); void (*cs_control)(u32 command); -- cgit v1.2.3 From 8a33a373e5ffb6040c58ff41ea48ba21d5f8b5e9 Mon Sep 17 00:00:00 2001 From: Alek Du Date: Wed, 30 Mar 2011 23:09:53 +0800 Subject: spi/dw_spi: remove the un-necessary flush() The flush() is used to drain all the left data in rx fifo, currently is is always called together with disabling hw. But from spec, disabling hw will also reset all the fifo, so flush() is not needed. Signed-off-by: Alek Du Signed-off-by: Feng Tang Signed-off-by: Grant Likely --- drivers/spi/dw_spi.c | 15 +-------------- 1 file changed, 1 insertion(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/dw_spi.c b/drivers/spi/dw_spi.c index c4fca3d9d45f..d3aaf8db86cc 100644 --- a/drivers/spi/dw_spi.c +++ b/drivers/spi/dw_spi.c @@ -173,17 +173,6 @@ static void wait_till_not_busy(struct dw_spi *dws) "DW SPI: Status keeps busy for 5000us after a read/write!\n"); } -static void flush(struct dw_spi *dws) -{ - while (dw_readw(dws, sr) & SR_RF_NOT_EMPT) { - dw_readw(dws, dr); - cpu_relax(); - } - - wait_till_not_busy(dws); -} - - static int dw_writer(struct dw_spi *dws) { u16 txw = 0; @@ -297,8 +286,7 @@ static void giveback(struct dw_spi *dws) static void int_error_stop(struct dw_spi *dws, const char *msg) { - /* Stop and reset hw */ - flush(dws); + /* Stop the hw */ spi_enable_chip(dws, 0); dev_err(&dws->master->dev, "%s\n", msg); @@ -800,7 +788,6 @@ static void spi_hw_init(struct dw_spi *dws) spi_enable_chip(dws, 0); spi_mask_intr(dws, 0xff); spi_enable_chip(dws, 1); - flush(dws); /* * Try to detect the FIFO depth if not set by interface driver, -- cgit v1.2.3 From 2ff271bf6505038d8c937e73438ea3c80c387439 Mon Sep 17 00:00:00 2001 From: Alek Du Date: Wed, 30 Mar 2011 23:09:54 +0800 Subject: spi/dw_spi: change poll mode transfer from byte ops to batch ops Current poll transfer will read/write one word, then wait till the hw is non-busy, it's not efficient. This patch will try to read/write as many words as permitted by hardware FIFO depth. Signed-off-by: Alek Du Signed-off-by: Feng Tang Signed-off-by: Grant Likely --- drivers/spi/dw_spi.c | 71 +++++++++++++++++++++++++++++++++++----------------- 1 file changed, 48 insertions(+), 23 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/dw_spi.c b/drivers/spi/dw_spi.c index d3aaf8db86cc..7a2a72268f0a 100644 --- a/drivers/spi/dw_spi.c +++ b/drivers/spi/dw_spi.c @@ -160,6 +160,37 @@ static inline void mrst_spi_debugfs_remove(struct dw_spi *dws) } #endif /* CONFIG_DEBUG_FS */ +/* Return the max entries we can fill into tx fifo */ +static inline u32 tx_max(struct dw_spi *dws) +{ + u32 tx_left, tx_room, rxtx_gap; + + tx_left = (dws->tx_end - dws->tx) / dws->n_bytes; + tx_room = dws->fifo_len - dw_readw(dws, txflr); + + /* + * Another concern is about the tx/rx mismatch, we + * though to use (dws->fifo_len - rxflr - txflr) as + * one maximum value for tx, but it doesn't cover the + * data which is out of tx/rx fifo and inside the + * shift registers. So a control from sw point of + * view is taken. + */ + rxtx_gap = ((dws->rx_end - dws->rx) - (dws->tx_end - dws->tx)) + / dws->n_bytes; + + return min3(tx_left, tx_room, (u32) (dws->fifo_len - rxtx_gap)); +} + +/* Return the max entries we should read out of rx fifo */ +static inline u32 rx_max(struct dw_spi *dws) +{ + u32 rx_left = (dws->rx_end - dws->rx) / dws->n_bytes; + + return min(rx_left, (u32)dw_readw(dws, rxflr)); +} + + static void wait_till_not_busy(struct dw_spi *dws) { unsigned long end = jiffies + 1 + usecs_to_jiffies(5000); @@ -175,33 +206,30 @@ static void wait_till_not_busy(struct dw_spi *dws) static int dw_writer(struct dw_spi *dws) { + u32 max = tx_max(dws); u16 txw = 0; - if (!(dw_readw(dws, sr) & SR_TF_NOT_FULL) - || (dws->tx == dws->tx_end)) - return 0; - - /* Set the tx word if the transfer's original "tx" is not null */ - if (dws->tx_end - dws->len) { - if (dws->n_bytes == 1) - txw = *(u8 *)(dws->tx); - else - txw = *(u16 *)(dws->tx); + while (max--) { + /* Set the tx word if the transfer's original "tx" is not null */ + if (dws->tx_end - dws->len) { + if (dws->n_bytes == 1) + txw = *(u8 *)(dws->tx); + else + txw = *(u16 *)(dws->tx); + } + dw_writew(dws, dr, txw); + dws->tx += dws->n_bytes; } - dw_writew(dws, dr, txw); - dws->tx += dws->n_bytes; - - wait_till_not_busy(dws); return 1; } static int dw_reader(struct dw_spi *dws) { + u32 max = rx_max(dws); u16 rxw; - while ((dw_readw(dws, sr) & SR_RF_NOT_EMPT) - && (dws->rx < dws->rx_end)) { + while (max--) { rxw = dw_readw(dws, dr); /* Care rx only if the transfer's original "rx" is not null */ if (dws->rx_end - dws->len) { @@ -213,7 +241,6 @@ static int dw_reader(struct dw_spi *dws) dws->rx += dws->n_bytes; } - wait_till_not_busy(dws); return dws->rx == dws->rx_end; } @@ -368,13 +395,11 @@ static irqreturn_t dw_spi_irq(int irq, void *dev_id) /* Must be called inside pump_transfers() */ static void poll_transfer(struct dw_spi *dws) { - while (dw_writer(dws)) + do { + dw_writer(dws); dw_reader(dws); - /* - * There is a possibility that the last word of a transaction - * will be lost if data is not ready. Re-read to solve this issue. - */ - dw_reader(dws); + cpu_relax(); + } while (dws->rx_end > dws->rx); dw_spi_xfer_done(dws); } -- cgit v1.2.3 From 3b8a4dd3ebfcc647260ad5c39ef4f73eb3a6b155 Mon Sep 17 00:00:00 2001 From: Alek Du Date: Wed, 30 Mar 2011 23:09:55 +0800 Subject: spi/dw_spi: improve the interrupt mode with the batch ops leverage the performance gain by change in low level read/write batch operations Signed-off-by: Alek Du Signed-off-by: Feng Tang Signed-off-by: Grant Likely --- drivers/spi/dw_spi.c | 63 +++++++++++++--------------------------------------- 1 file changed, 16 insertions(+), 47 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/dw_spi.c b/drivers/spi/dw_spi.c index 7a2a72268f0a..855ac4ae0f22 100644 --- a/drivers/spi/dw_spi.c +++ b/drivers/spi/dw_spi.c @@ -190,21 +190,7 @@ static inline u32 rx_max(struct dw_spi *dws) return min(rx_left, (u32)dw_readw(dws, rxflr)); } - -static void wait_till_not_busy(struct dw_spi *dws) -{ - unsigned long end = jiffies + 1 + usecs_to_jiffies(5000); - - while (time_before(jiffies, end)) { - if (!(dw_readw(dws, sr) & SR_BUSY)) - return; - cpu_relax(); - } - dev_err(&dws->master->dev, - "DW SPI: Status keeps busy for 5000us after a read/write!\n"); -} - -static int dw_writer(struct dw_spi *dws) +static void dw_writer(struct dw_spi *dws) { u32 max = tx_max(dws); u16 txw = 0; @@ -220,11 +206,9 @@ static int dw_writer(struct dw_spi *dws) dw_writew(dws, dr, txw); dws->tx += dws->n_bytes; } - - return 1; } -static int dw_reader(struct dw_spi *dws) +static void dw_reader(struct dw_spi *dws) { u32 max = rx_max(dws); u16 rxw; @@ -240,8 +224,6 @@ static int dw_reader(struct dw_spi *dws) } dws->rx += dws->n_bytes; } - - return dws->rx == dws->rx_end; } static void *next_transfer(struct dw_spi *dws) @@ -340,35 +322,28 @@ EXPORT_SYMBOL_GPL(dw_spi_xfer_done); static irqreturn_t interrupt_transfer(struct dw_spi *dws) { - u16 irq_status, irq_mask = 0x3f; - u32 int_level = dws->fifo_len / 2; - u32 left; + u16 irq_status = dw_readw(dws, isr); - irq_status = dw_readw(dws, isr) & irq_mask; /* Error handling */ if (irq_status & (SPI_INT_TXOI | SPI_INT_RXOI | SPI_INT_RXUI)) { dw_readw(dws, txoicr); dw_readw(dws, rxoicr); dw_readw(dws, rxuicr); - int_error_stop(dws, "interrupt_transfer: fifo overrun"); + int_error_stop(dws, "interrupt_transfer: fifo overrun/underrun"); return IRQ_HANDLED; } + dw_reader(dws); + if (dws->rx_end == dws->rx) { + spi_mask_intr(dws, SPI_INT_TXEI); + dw_spi_xfer_done(dws); + return IRQ_HANDLED; + } if (irq_status & SPI_INT_TXEI) { spi_mask_intr(dws, SPI_INT_TXEI); - - left = (dws->tx_end - dws->tx) / dws->n_bytes; - left = (left > int_level) ? int_level : left; - - while (left--) - dw_writer(dws); - dw_reader(dws); - - /* Re-enable the IRQ if there is still data left to tx */ - if (dws->tx_end > dws->tx) - spi_umask_intr(dws, SPI_INT_TXEI); - else - dw_spi_xfer_done(dws); + dw_writer(dws); + /* Enable TX irq always, it will be disabled when RX finished */ + spi_umask_intr(dws, SPI_INT_TXEI); } return IRQ_HANDLED; @@ -377,15 +352,13 @@ static irqreturn_t interrupt_transfer(struct dw_spi *dws) static irqreturn_t dw_spi_irq(int irq, void *dev_id) { struct dw_spi *dws = dev_id; - u16 irq_status, irq_mask = 0x3f; + u16 irq_status = dw_readw(dws, isr) & 0x3f; - irq_status = dw_readw(dws, isr) & irq_mask; if (!irq_status) return IRQ_NONE; if (!dws->cur_msg) { spi_mask_intr(dws, SPI_INT_TXEI); - /* Never fail */ return IRQ_HANDLED; } @@ -492,12 +465,8 @@ static void pump_transfers(unsigned long data) switch (bits) { case 8: - dws->n_bytes = 1; - dws->dma_width = 1; - break; case 16: - dws->n_bytes = 2; - dws->dma_width = 2; + dws->n_bytes = dws->dma_width = bits >> 3; break; default: printk(KERN_ERR "MRST SPI0: unsupported bits:" @@ -541,7 +510,7 @@ static void pump_transfers(unsigned long data) txint_level = dws->fifo_len / 2; txint_level = (templen > txint_level) ? txint_level : templen; - imask |= SPI_INT_TXEI; + imask |= SPI_INT_TXEI | SPI_INT_TXOI | SPI_INT_RXUI | SPI_INT_RXOI; dws->transfer_handler = interrupt_transfer; } -- cgit v1.2.3 From a18c266f8e43004c85c56b4077f6158fcadb7707 Mon Sep 17 00:00:00 2001 From: Magnus Templing Date: Thu, 19 May 2011 18:05:34 +0200 Subject: spi/pl022: timeout on polled transfer v2 This adds the missing handling of polling timeouts and deletes our last todo. Signed-off-by: Magnus Templing Reviewed-by: Srinidhi Kasagar [Fixups from review by Wolfram Sang] Signed-off-by: Linus Walleij Signed-off-by: Grant Likely --- drivers/spi/amba-pl022.c | 23 +++++++++++++++-------- 1 file changed, 15 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c index 08de58e7f59f..18667de436f1 100644 --- a/drivers/spi/amba-pl022.c +++ b/drivers/spi/amba-pl022.c @@ -24,11 +24,6 @@ * GNU General Public License for more details. */ -/* - * TODO: - * - add timeout on polled transfers - */ - #include #include #include @@ -287,6 +282,8 @@ #define CLEAR_ALL_INTERRUPTS 0x3 +#define SPI_POLLING_TIMEOUT 1000 + /* * The type of reading going on on this chip @@ -1378,6 +1375,7 @@ static void do_polling_transfer(struct pl022 *pl022) struct spi_transfer *transfer = NULL; struct spi_transfer *previous = NULL; struct chip_data *chip; + unsigned long time, timeout; chip = pl022->cur_chip; message = pl022->cur_msg; @@ -1415,9 +1413,18 @@ static void do_polling_transfer(struct pl022 *pl022) SSP_CR1(pl022->virtbase)); dev_dbg(&pl022->adev->dev, "polling transfer ongoing ...\n"); - /* FIXME: insert a timeout so we don't hang here indefinitely */ - while (pl022->tx < pl022->tx_end || pl022->rx < pl022->rx_end) + + timeout = jiffies + msecs_to_jiffies(SPI_POLLING_TIMEOUT); + while (pl022->tx < pl022->tx_end || pl022->rx < pl022->rx_end) { + time = jiffies; readwriter(pl022); + if (time_after(time, timeout)) { + dev_warn(&pl022->adev->dev, + "%s: timeout!\n", __func__); + message->state = STATE_ERROR; + goto out; + } + } /* Update total byte transferred */ message->actual_length += pl022->cur_transfer->len; @@ -1426,7 +1433,7 @@ static void do_polling_transfer(struct pl022 *pl022) /* Move to next transfer */ message->state = next_transfer(pl022); } - +out: /* Handle end of message */ if (message->state == STATE_DONE) message->status = 0; -- cgit v1.2.3 From 7f9a4b9797405061a07fca26ff1b4f305c564e5d Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 19 May 2011 14:13:19 +0200 Subject: spi/pl022: mark driver non-experimental This driver has no TODO, and is now used on several platforms: ARM, U300, Ux500, SPEAr and more. So drop the EXPERIMENTAL requirement. Signed-off-by: Linus Walleij Signed-off-by: Grant Likely --- drivers/spi/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index fc14b8dea0d7..fbd96b29530d 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -271,8 +271,8 @@ config SPI_ORION This enables using the SPI master controller on the Orion chips. config SPI_PL022 - tristate "ARM AMBA PL022 SSP controller (EXPERIMENTAL)" - depends on ARM_AMBA && EXPERIMENTAL + tristate "ARM AMBA PL022 SSP controller" + depends on ARM_AMBA default y if MACH_U300 default y if ARCH_REALVIEW default y if INTEGRATOR_IMPD1 -- cgit v1.2.3 From 521999bd4a8c47a86136b9d8223a9480f5906db8 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 19 May 2011 20:01:25 +0200 Subject: spi/pl022: use cpu_relax in the busy loop This relaxes the cpu in the polling busy-wait loop. Reported-by: Vitaly Wool Signed-off-by: Linus Walleij Signed-off-by: Grant Likely --- drivers/spi/amba-pl022.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c index 18667de436f1..8a2b88aee373 100644 --- a/drivers/spi/amba-pl022.c +++ b/drivers/spi/amba-pl022.c @@ -1424,6 +1424,7 @@ static void do_polling_transfer(struct pl022 *pl022) message->state = STATE_ERROR; goto out; } + cpu_relax(); } /* Update total byte transferred */ -- cgit v1.2.3 From 0c4a1590189b426814748d2e03b95541852b3af6 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 11 May 2011 00:09:30 +0200 Subject: spi: Use void pointers for data in simple SPI I/O operations Currently the simple SPI I/O operations all take pointers to u8 * buffers to operate on. This creates needless type compatibility issues and the underlying spi_transfer structure uses void pointers anyway so convert the API over to take void pointers too. Signed-off-by: Mark Brown Signed-off-by: Grant Likely --- drivers/spi/spi.c | 4 ++-- include/linux/spi/spi.h | 8 ++++---- 2 files changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 82b9a428c323..2e13a14bba3f 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -1047,8 +1047,8 @@ static u8 *buf; * spi_{async,sync}() calls with dma-safe buffers. */ int spi_write_then_read(struct spi_device *spi, - const u8 *txbuf, unsigned n_tx, - u8 *rxbuf, unsigned n_rx) + const void *txbuf, unsigned n_tx, + void *rxbuf, unsigned n_rx) { static DEFINE_MUTEX(lock); diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index b4d7710bc38d..bb4f5fbbbd8e 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -581,7 +581,7 @@ extern int spi_bus_unlock(struct spi_master *master); * Callable only from contexts that can sleep. */ static inline int -spi_write(struct spi_device *spi, const u8 *buf, size_t len) +spi_write(struct spi_device *spi, const void *buf, size_t len) { struct spi_transfer t = { .tx_buf = buf, @@ -605,7 +605,7 @@ spi_write(struct spi_device *spi, const u8 *buf, size_t len) * Callable only from contexts that can sleep. */ static inline int -spi_read(struct spi_device *spi, u8 *buf, size_t len) +spi_read(struct spi_device *spi, void *buf, size_t len) { struct spi_transfer t = { .rx_buf = buf, @@ -620,8 +620,8 @@ spi_read(struct spi_device *spi, u8 *buf, size_t len) /* this copies txbuf and rxbuf data; for small transfers only! */ extern int spi_write_then_read(struct spi_device *spi, - const u8 *txbuf, unsigned n_tx, - u8 *rxbuf, unsigned n_rx); + const void *txbuf, unsigned n_tx, + void *rxbuf, unsigned n_rx); /** * spi_w8r8 - SPI synchronous 8 bit write followed by 8 bit read -- cgit v1.2.3 From 680c1305e259a488f489bc887854523b6c6e0705 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 11 May 2011 21:27:00 +0800 Subject: spi/spi_sh: use spi_unregister_master instead of spi_master_put in remove path spi_master_put() should only be used in error handling. Once spi_register_master() returns success, we should call spi_unregister_master() instead. Signed-off-by: Axel Lin Signed-off-by: Grant Likely --- drivers/spi/spi_sh.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/spi_sh.c b/drivers/spi/spi_sh.c index 869a07d375d6..9eedd71ad898 100644 --- a/drivers/spi/spi_sh.c +++ b/drivers/spi/spi_sh.c @@ -427,10 +427,10 @@ static int __devexit spi_sh_remove(struct platform_device *pdev) { struct spi_sh_data *ss = dev_get_drvdata(&pdev->dev); + spi_unregister_master(ss->master); destroy_workqueue(ss->workqueue); free_irq(ss->irq, ss); iounmap(ss->addr); - spi_master_put(ss->master); return 0; } -- cgit v1.2.3 From 8901e1b98e1dad75c4567d03dd00a59bd6c450e8 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 11 May 2011 21:28:16 +0800 Subject: spi/spi_tegra: use spi_unregister_master() instead of spi_master_put() spi_master_put() should only be used in error handling. Once spi_register_master() returns success, we should call spi_unregister_master() instead. Signed-off-by: Axel Lin Signed-off-by: Grant Likely --- drivers/spi/spi_tegra.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/spi_tegra.c b/drivers/spi/spi_tegra.c index 891e5909038c..6c3aa6ecaade 100644 --- a/drivers/spi/spi_tegra.c +++ b/drivers/spi/spi_tegra.c @@ -578,6 +578,7 @@ static int __devexit spi_tegra_remove(struct platform_device *pdev) master = dev_get_drvdata(&pdev->dev); tspi = spi_master_get_devdata(master); + spi_unregister_master(master); tegra_dma_free_channel(tspi->rx_dma); dma_free_coherent(&pdev->dev, sizeof(u32) * BB_LEN, @@ -586,7 +587,6 @@ static int __devexit spi_tegra_remove(struct platform_device *pdev) clk_put(tspi->clk); iounmap(tspi->base); - spi_master_put(master); r = platform_get_resource(pdev, IORESOURCE_MEM, 0); release_mem_region(r->start, (r->end - r->start) + 1); -- cgit v1.2.3 From 708a7e438806c02add92a585b0a6b4b2ae50159b Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sun, 15 May 2011 07:33:28 +0800 Subject: spi/spi_nuc900: Use spi_bitbang_stop instead of spi_unregister_master in nuc900_spi_remove Calling spi_bitbang_stop() will also destroy bitbang->workqueue, which is created by calling spi_bitbang_start() in nuc900_spi_probe(). Signed-off-by: Axel Lin Signed-off-by: Grant Likely --- drivers/spi/spi_nuc900.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/spi_nuc900.c b/drivers/spi/spi_nuc900.c index d5be18b3078c..3cd15f690f16 100644 --- a/drivers/spi/spi_nuc900.c +++ b/drivers/spi/spi_nuc900.c @@ -463,7 +463,7 @@ static int __devexit nuc900_spi_remove(struct platform_device *dev) platform_set_drvdata(dev, NULL); - spi_unregister_master(hw->master); + spi_bitbang_stop(&hw->bitbang); clk_disable(hw->clk); clk_put(hw->clk); -- cgit v1.2.3 From c6e7b8cb11632a3b3968c6f64e179c7619eb70c0 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sun, 15 May 2011 07:35:16 +0800 Subject: spi/spi_s3c24xx: Use spi_bitbang_stop instead of spi_unregister_master in s3c24xx_spi_remove Calling spi_bitbang_stop() will also destroy bitbang->workqueue, which is created by calling spi_bitbang_start() in s3c24xx_spi_probe(). Signed-off-by: Axel Lin Signed-off-by: Grant Likely --- drivers/spi/spi_s3c24xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c index 151a95e40653..1a5fcabfd565 100644 --- a/drivers/spi/spi_s3c24xx.c +++ b/drivers/spi/spi_s3c24xx.c @@ -668,7 +668,7 @@ static int __exit s3c24xx_spi_remove(struct platform_device *dev) platform_set_drvdata(dev, NULL); - spi_unregister_master(hw->master); + spi_bitbang_stop(&hw->bitbang); clk_disable(hw->clk); clk_put(hw->clk); -- cgit v1.2.3 From 43c640157d4366a3ea9ba01f903ea892f46376ee Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 16 May 2011 09:40:10 +0530 Subject: spi/amba-pl022: work in polling or interrupt mode if pl022_dma_probe fails If pl022_dma_probe fails, we can try to transfer data in polling or interrupt mode. Also, set platform_info->enable_dma to 0, so that no other code tries to use dma. Signed-off-by: Viresh Kumar Acked-by: Linus Walleij Signed-off-by: Grant Likely --- drivers/spi/amba-pl022.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c index 8a2b88aee373..6a9e58dd36c7 100644 --- a/drivers/spi/amba-pl022.c +++ b/drivers/spi/amba-pl022.c @@ -1060,7 +1060,7 @@ static int __init pl022_dma_probe(struct pl022 *pl022) pl022->master_info->dma_filter, pl022->master_info->dma_rx_param); if (!pl022->dma_rx_channel) { - dev_err(&pl022->adev->dev, "no RX DMA channel!\n"); + dev_dbg(&pl022->adev->dev, "no RX DMA channel!\n"); goto err_no_rxchan; } @@ -1068,13 +1068,13 @@ static int __init pl022_dma_probe(struct pl022 *pl022) pl022->master_info->dma_filter, pl022->master_info->dma_tx_param); if (!pl022->dma_tx_channel) { - dev_err(&pl022->adev->dev, "no TX DMA channel!\n"); + dev_dbg(&pl022->adev->dev, "no TX DMA channel!\n"); goto err_no_txchan; } pl022->dummypage = kmalloc(PAGE_SIZE, GFP_KERNEL); if (!pl022->dummypage) { - dev_err(&pl022->adev->dev, "no DMA dummypage!\n"); + dev_dbg(&pl022->adev->dev, "no DMA dummypage!\n"); goto err_no_dummypage; } @@ -1090,6 +1090,8 @@ err_no_txchan: dma_release_channel(pl022->dma_rx_channel); pl022->dma_rx_channel = NULL; err_no_rxchan: + dev_err(&pl022->adev->dev, + "Failed to work in dma mode, work without dma!\n"); return -ENODEV; } @@ -2115,7 +2117,7 @@ pl022_probe(struct amba_device *adev, const struct amba_id *id) if (platform_info->enable_dma) { status = pl022_dma_probe(pl022); if (status != 0) - goto err_no_dma; + platform_info->enable_dma = 0; } /* Initialize and start queue */ @@ -2151,7 +2153,6 @@ pl022_probe(struct amba_device *adev, const struct amba_id *id) err_init_queue: destroy_queue(pl022); pl022_dma_remove(pl022); - err_no_dma: free_irq(adev->irq[0], pl022); err_no_irq: clk_put(pl022->clk); -- cgit v1.2.3