From 9268beb5c2301b6651f0cc78734a1c0d15b3fcb1 Mon Sep 17 00:00:00 2001
From: Soren Brinkmann <soren.brinkmann@xilinx.com>
Date: Thu, 17 Apr 2014 11:40:52 -0700
Subject: clk: zynq: Leave debug clocks in bootup state

Make sure debug clocks stay enabled if the bootloader enabled them.
Otherwise debug HW may crash due to bus-hangs caused by stopped clocks.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 drivers/clk/zynq/clkc.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

(limited to 'drivers')

diff --git a/drivers/clk/zynq/clkc.c b/drivers/clk/zynq/clkc.c
index 52c09afdcfb7..246cf1226eaa 100644
--- a/drivers/clk/zynq/clkc.c
+++ b/drivers/clk/zynq/clkc.c
@@ -53,6 +53,9 @@ static void __iomem *zynq_clkc_base;
 
 #define NUM_MIO_PINS	54
 
+#define DBG_CLK_CTRL_CLKACT_TRC		BIT(0)
+#define DBG_CLK_CTRL_CPU_1XCLKACT	BIT(1)
+
 enum zynq_clk {
 	armpll, ddrpll, iopll,
 	cpu_6or4x, cpu_3or2x, cpu_2x, cpu_1x,
@@ -499,6 +502,15 @@ static void __init zynq_clk_setup(struct device_node *np)
 			clk_output_name[cpu_1x], 0, SLCR_DBG_CLK_CTRL, 1, 0,
 			&dbgclk_lock);
 
+	/* leave debug clocks in the state the bootloader set them up to */
+	tmp = clk_readl(SLCR_DBG_CLK_CTRL);
+	if (tmp & DBG_CLK_CTRL_CLKACT_TRC)
+		if (clk_prepare_enable(clks[dbg_trc]))
+			pr_warn("%s: trace clk enable failed\n", __func__);
+	if (tmp & DBG_CLK_CTRL_CPU_1XCLKACT)
+		if (clk_prepare_enable(clks[dbg_apb]))
+			pr_warn("%s: debug APB clk enable failed\n", __func__);
+
 	/* One gated clock for all APER clocks. */
 	clks[dma] = clk_register_gate(NULL, clk_output_name[dma],
 			clk_output_name[cpu_2x], 0, SLCR_APER_CLK_CTRL, 0, 0,
-- 
cgit v1.2.3


From 66ecbfea762ad28bd108db76775483b491068b92 Mon Sep 17 00:00:00 2001
From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Date: Tue, 22 Apr 2014 23:26:08 +0200
Subject: clk: mvebu: add Orion5x clock driver

This commit adds a core clock driver for the Orion5x SoC, with support
for the tclk, the CPU frequency and the DDR frequency. All the details
about the Sample-At-Reset register were extracted from the U-Boot
sources for Orion5x.

Note that Orion5x does not have gatable clocks, so this core clock
driver is sufficient to support clocking on Orion5x platforms.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Link: https://lkml.kernel.org/r/1398202002-28530-5-git-send-email-thomas.petazzoni@free-electrons.com
Cc: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
---
 .../devicetree/bindings/clock/mvebu-core-clock.txt |   8 +
 drivers/clk/mvebu/Kconfig                          |   4 +
 drivers/clk/mvebu/Makefile                         |   1 +
 drivers/clk/mvebu/orion.c                          | 210 +++++++++++++++++++++
 4 files changed, 223 insertions(+)
 create mode 100644 drivers/clk/mvebu/orion.c

(limited to 'drivers')

diff --git a/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt
index 307a503c5db8..dc5ea5b22da9 100644
--- a/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt
+++ b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt
@@ -29,6 +29,11 @@ The following is a list of provided IDs and clock names on Kirkwood and Dove:
  2 = l2clk  (L2 Cache clock derived from CPU0 clock)
  3 = ddrclk (DDR controller clock derived from CPU0 clock)
 
+The following is a list of provided IDs and clock names on Orion5x:
+ 0 = tclk   (Internal Bus clock)
+ 1 = cpuclk (CPU0 clock)
+ 2 = ddrclk (DDR controller clock derived from CPU0 clock)
+
 Required properties:
 - compatible : shall be one of the following:
 	"marvell,armada-370-core-clock" - For Armada 370 SoC core clocks
@@ -38,6 +43,9 @@ Required properties:
 	"marvell,dove-core-clock" - for Dove SoC core clocks
 	"marvell,kirkwood-core-clock" - for Kirkwood SoC (except mv88f6180)
 	"marvell,mv88f6180-core-clock" - for Kirkwood MV88f6180 SoC
+	"marvell,mv88f5182-core-clock" - for Orion MV88F5182 SoC
+	"marvell,mv88f5281-core-clock" - for Orion MV88F5281 SoC
+	"marvell,mv88f6183-core-clock" - for Orion MV88F6183 SoC
 - reg : shall be the register address of the Sample-At-Reset (SAR) register
 - #clock-cells : from common clock binding; shall be set to 1
 
diff --git a/drivers/clk/mvebu/Kconfig b/drivers/clk/mvebu/Kconfig
index 693f7be129f1..3b34dba9178d 100644
--- a/drivers/clk/mvebu/Kconfig
+++ b/drivers/clk/mvebu/Kconfig
@@ -34,3 +34,7 @@ config DOVE_CLK
 config KIRKWOOD_CLK
 	bool
 	select MVEBU_CLK_COMMON
+
+config ORION_CLK
+	bool
+	select MVEBU_CLK_COMMON
diff --git a/drivers/clk/mvebu/Makefile b/drivers/clk/mvebu/Makefile
index 4c66162fb0b4..a9a56fc01901 100644
--- a/drivers/clk/mvebu/Makefile
+++ b/drivers/clk/mvebu/Makefile
@@ -8,3 +8,4 @@ obj-$(CONFIG_ARMADA_38X_CLK)	+= armada-38x.o
 obj-$(CONFIG_ARMADA_XP_CLK)	+= armada-xp.o
 obj-$(CONFIG_DOVE_CLK)		+= dove.o
 obj-$(CONFIG_KIRKWOOD_CLK)	+= kirkwood.o
+obj-$(CONFIG_ORION_CLK)		+= orion.o
diff --git a/drivers/clk/mvebu/orion.c b/drivers/clk/mvebu/orion.c
new file mode 100644
index 000000000000..fd129566c1ce
--- /dev/null
+++ b/drivers/clk/mvebu/orion.c
@@ -0,0 +1,210 @@
+/*
+ * Marvell Orion SoC clocks
+ *
+ * Copyright (C) 2014 Thomas Petazzoni
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include "common.h"
+
+static const struct coreclk_ratio orion_coreclk_ratios[] __initconst = {
+	{ .id = 0, .name = "ddrclk", }
+};
+
+/*
+ * Orion 5182
+ */
+
+#define SAR_MV88F5182_TCLK_FREQ      8
+#define SAR_MV88F5182_TCLK_FREQ_MASK 0x3
+
+static u32 __init mv88f5182_get_tclk_freq(void __iomem *sar)
+{
+	u32 opt = (readl(sar) >> SAR_MV88F5182_TCLK_FREQ) &
+		SAR_MV88F5182_TCLK_FREQ_MASK;
+	if (opt == 1)
+		return 150000000;
+	else if (opt == 2)
+		return 166666667;
+	else
+		return 0;
+}
+
+#define SAR_MV88F5182_CPU_FREQ       4
+#define SAR_MV88F5182_CPU_FREQ_MASK  0xf
+
+static u32 __init mv88f5182_get_cpu_freq(void __iomem *sar)
+{
+	u32 opt = (readl(sar) >> SAR_MV88F5182_CPU_FREQ) &
+		SAR_MV88F5182_CPU_FREQ_MASK;
+	if (opt == 0)
+		return 333333333;
+	else if (opt == 1 || opt == 2)
+		return 400000000;
+	else if (opt == 3)
+		return 500000000;
+	else
+		return 0;
+}
+
+static void __init mv88f5182_get_clk_ratio(void __iomem *sar, int id,
+					   int *mult, int *div)
+{
+	u32 opt = (readl(sar) >> SAR_MV88F5182_CPU_FREQ) &
+		SAR_MV88F5182_CPU_FREQ_MASK;
+	if (opt == 0 || opt == 1) {
+		*mult = 1;
+		*div  = 2;
+	} else if (opt == 2 || opt == 3) {
+		*mult = 1;
+		*div  = 3;
+	} else {
+		*mult = 0;
+		*div  = 1;
+	}
+}
+
+static const struct coreclk_soc_desc mv88f5182_coreclks = {
+	.get_tclk_freq = mv88f5182_get_tclk_freq,
+	.get_cpu_freq = mv88f5182_get_cpu_freq,
+	.get_clk_ratio = mv88f5182_get_clk_ratio,
+	.ratios = orion_coreclk_ratios,
+	.num_ratios = ARRAY_SIZE(orion_coreclk_ratios),
+};
+
+static void __init mv88f5182_clk_init(struct device_node *np)
+{
+	return mvebu_coreclk_setup(np, &mv88f5182_coreclks);
+}
+
+CLK_OF_DECLARE(mv88f5182_clk, "marvell,mv88f5182-core-clock", mv88f5182_clk_init);
+
+/*
+ * Orion 5281
+ */
+
+static u32 __init mv88f5281_get_tclk_freq(void __iomem *sar)
+{
+	/* On 5281, tclk is always 166 Mhz */
+	return 166666667;
+}
+
+#define SAR_MV88F5281_CPU_FREQ       4
+#define SAR_MV88F5281_CPU_FREQ_MASK  0xf
+
+static u32 __init mv88f5281_get_cpu_freq(void __iomem *sar)
+{
+	u32 opt = (readl(sar) >> SAR_MV88F5281_CPU_FREQ) &
+		SAR_MV88F5281_CPU_FREQ_MASK;
+	if (opt == 1 || opt == 2)
+		return 400000000;
+	else if (opt == 3)
+		return 500000000;
+	else
+		return 0;
+}
+
+static void __init mv88f5281_get_clk_ratio(void __iomem *sar, int id,
+					   int *mult, int *div)
+{
+	u32 opt = (readl(sar) >> SAR_MV88F5281_CPU_FREQ) &
+		SAR_MV88F5281_CPU_FREQ_MASK;
+	if (opt == 1) {
+		*mult = 1;
+		*div = 2;
+	} else if (opt == 2 || opt == 3) {
+		*mult = 1;
+		*div = 3;
+	} else {
+		*mult = 0;
+		*div = 1;
+	}
+}
+
+static const struct coreclk_soc_desc mv88f5281_coreclks = {
+	.get_tclk_freq = mv88f5281_get_tclk_freq,
+	.get_cpu_freq = mv88f5281_get_cpu_freq,
+	.get_clk_ratio = mv88f5281_get_clk_ratio,
+	.ratios = orion_coreclk_ratios,
+	.num_ratios = ARRAY_SIZE(orion_coreclk_ratios),
+};
+
+static void __init mv88f5281_clk_init(struct device_node *np)
+{
+	return mvebu_coreclk_setup(np, &mv88f5281_coreclks);
+}
+
+CLK_OF_DECLARE(mv88f5281_clk, "marvell,mv88f5281-core-clock", mv88f5281_clk_init);
+
+/*
+ * Orion 6183
+ */
+
+#define SAR_MV88F6183_TCLK_FREQ      9
+#define SAR_MV88F6183_TCLK_FREQ_MASK 0x1
+
+static u32 __init mv88f6183_get_tclk_freq(void __iomem *sar)
+{
+	u32 opt = (readl(sar) >> SAR_MV88F6183_TCLK_FREQ) &
+		SAR_MV88F6183_TCLK_FREQ_MASK;
+	if (opt == 0)
+		return 133333333;
+	else if (opt == 1)
+		return 166666667;
+	else
+		return 0;
+}
+
+#define SAR_MV88F6183_CPU_FREQ       1
+#define SAR_MV88F6183_CPU_FREQ_MASK  0x3f
+
+static u32 __init mv88f6183_get_cpu_freq(void __iomem *sar)
+{
+	u32 opt = (readl(sar) >> SAR_MV88F6183_CPU_FREQ) &
+		SAR_MV88F6183_CPU_FREQ_MASK;
+	if (opt == 9)
+		return 333333333;
+	else if (opt == 17)
+		return 400000000;
+	else
+		return 0;
+}
+
+static void __init mv88f6183_get_clk_ratio(void __iomem *sar, int id,
+					   int *mult, int *div)
+{
+	u32 opt = (readl(sar) >> SAR_MV88F6183_CPU_FREQ) &
+		SAR_MV88F6183_CPU_FREQ_MASK;
+	if (opt == 9 || opt == 17) {
+		*mult = 1;
+		*div  = 2;
+	} else {
+		*mult = 0;
+		*div  = 1;
+	}
+}
+
+static const struct coreclk_soc_desc mv88f6183_coreclks = {
+	.get_tclk_freq = mv88f6183_get_tclk_freq,
+	.get_cpu_freq = mv88f6183_get_cpu_freq,
+	.get_clk_ratio = mv88f6183_get_clk_ratio,
+	.ratios = orion_coreclk_ratios,
+	.num_ratios = ARRAY_SIZE(orion_coreclk_ratios),
+};
+
+
+static void __init mv88f6183_clk_init(struct device_node *np)
+{
+	return mvebu_coreclk_setup(np, &mv88f6183_coreclks);
+}
+
+CLK_OF_DECLARE(mv88f6183_clk, "marvell,mv88f6183-core-clock", mv88f6183_clk_init);
-- 
cgit v1.2.3


From 774b514390b1eb8476bc759262790762bd1ef45a Mon Sep 17 00:00:00 2001
From: Maxime COQUELIN <maxime.coquelin@st.com>
Date: Wed, 29 Jan 2014 17:24:07 +0100
Subject: clk: divider: Add round to closest divider

In some cases, we want to be able to round the divider to the closest one,
instead than rounding up.

This patch adds a new CLK_DIVIDER_ROUND_CLOSEST flag to specify the divider
has to round to closest div, keeping rounding up as de default behaviour.

Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/clk-divider.c    | 69 ++++++++++++++++++++++++++++++++++++++++++--
 include/linux/clk-provider.h |  3 ++
 2 files changed, 70 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
index 4637697c139f..c57294563a98 100644
--- a/drivers/clk/clk-divider.c
+++ b/drivers/clk/clk-divider.c
@@ -43,6 +43,17 @@ static unsigned int _get_table_maxdiv(const struct clk_div_table *table)
 	return maxdiv;
 }
 
+static unsigned int _get_table_mindiv(const struct clk_div_table *table)
+{
+	unsigned int mindiv = UINT_MAX;
+	const struct clk_div_table *clkt;
+
+	for (clkt = table; clkt->div; clkt++)
+		if (clkt->div < mindiv)
+			mindiv = clkt->div;
+	return mindiv;
+}
+
 static unsigned int _get_maxdiv(struct clk_divider *divider)
 {
 	if (divider->flags & CLK_DIVIDER_ONE_BASED)
@@ -162,6 +173,24 @@ static int _round_up_table(const struct clk_div_table *table, int div)
 	return up;
 }
 
+static int _round_down_table(const struct clk_div_table *table, int div)
+{
+	const struct clk_div_table *clkt;
+	int down = _get_table_mindiv(table);
+
+	for (clkt = table; clkt->div; clkt++) {
+		if (clkt->div == div)
+			return clkt->div;
+		else if (clkt->div > div)
+			continue;
+
+		if ((div - clkt->div) < (div - down))
+			down = clkt->div;
+	}
+
+	return down;
+}
+
 static int _div_round_up(struct clk_divider *divider,
 		unsigned long parent_rate, unsigned long rate)
 {
@@ -175,6 +204,42 @@ static int _div_round_up(struct clk_divider *divider,
 	return div;
 }
 
+static int _div_round_closest(struct clk_divider *divider,
+		unsigned long parent_rate, unsigned long rate)
+{
+	int up, down, div;
+
+	up = down = div = DIV_ROUND_CLOSEST(parent_rate, rate);
+
+	if (divider->flags & CLK_DIVIDER_POWER_OF_TWO) {
+		up = __roundup_pow_of_two(div);
+		down = __rounddown_pow_of_two(div);
+	} else if (divider->table) {
+		up = _round_up_table(divider->table, div);
+		down = _round_down_table(divider->table, div);
+	}
+
+	return (up - div) <= (div - down) ? up : down;
+}
+
+static int _div_round(struct clk_divider *divider, unsigned long parent_rate,
+		unsigned long rate)
+{
+	if (divider->flags & CLK_DIVIDER_ROUND_CLOSEST)
+		return _div_round_closest(divider, parent_rate, rate);
+
+	return _div_round_up(divider, parent_rate, rate);
+}
+
+static bool _is_best_div(struct clk_divider *divider,
+		int rate, int now, int best)
+{
+	if (divider->flags & CLK_DIVIDER_ROUND_CLOSEST)
+		return abs(rate - now) < abs(rate - best);
+
+	return now <= rate && now > best;
+}
+
 static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate,
 		unsigned long *best_parent_rate)
 {
@@ -190,7 +255,7 @@ static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate,
 
 	if (!(__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT)) {
 		parent_rate = *best_parent_rate;
-		bestdiv = _div_round_up(divider, parent_rate, rate);
+		bestdiv = _div_round(divider, parent_rate, rate);
 		bestdiv = bestdiv == 0 ? 1 : bestdiv;
 		bestdiv = bestdiv > maxdiv ? maxdiv : bestdiv;
 		return bestdiv;
@@ -217,7 +282,7 @@ static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate,
 		parent_rate = __clk_round_rate(__clk_get_parent(hw->clk),
 				MULT_ROUND_UP(rate, i));
 		now = DIV_ROUND_UP(parent_rate, i);
-		if (now <= rate && now > best) {
+		if (_is_best_div(divider, rate, now, best)) {
 			bestdiv = i;
 			best = now;
 			*best_parent_rate = parent_rate;
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 511917416fb0..59e2eb58f555 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -312,6 +312,8 @@ struct clk_div_table {
  *   of this register, and mask of divider bits are in higher 16-bit of this
  *   register.  While setting the divider bits, higher 16-bit should also be
  *   updated to indicate changing divider bits.
+ * CLK_DIVIDER_ROUND_CLOSEST - Makes the best calculated divider to be rounded
+ *	to the closest integer instead of the up one.
  */
 struct clk_divider {
 	struct clk_hw	hw;
@@ -327,6 +329,7 @@ struct clk_divider {
 #define CLK_DIVIDER_POWER_OF_TWO	BIT(1)
 #define CLK_DIVIDER_ALLOW_ZERO		BIT(2)
 #define CLK_DIVIDER_HIWORD_MASK		BIT(3)
+#define CLK_DIVIDER_ROUND_CLOSEST	BIT(4)
 
 extern const struct clk_ops clk_divider_ops;
 struct clk *clk_register_divider(struct device *dev, const char *name,
-- 
cgit v1.2.3


From 0e2de78ecdc842218a2b6c422bb4a8ff4d85d11f Mon Sep 17 00:00:00 2001
From: Maxime COQUELIN <maxime.coquelin@st.com>
Date: Wed, 29 Jan 2014 17:24:08 +0100
Subject: clk: divider: Optimize clk_divider_bestdiv loop

Currently, the for-loop used to try all the different dividers to find the
one that best fit tries all the values from 1 to max_div, incrementing by one.
In case of power-of-two, or table based divider, the loop isn't optimal.

Instead of incrementing by one, this patch provides directly the next divider.

Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/clk-divider.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
index c57294563a98..b3c83966be18 100644
--- a/drivers/clk/clk-divider.c
+++ b/drivers/clk/clk-divider.c
@@ -240,6 +240,18 @@ static bool _is_best_div(struct clk_divider *divider,
 	return now <= rate && now > best;
 }
 
+static int _next_div(struct clk_divider *divider, int div)
+{
+	div++;
+
+	if (divider->flags & CLK_DIVIDER_POWER_OF_TWO)
+		return __roundup_pow_of_two(div);
+	if (divider->table)
+		return _round_up_table(divider->table, div);
+
+	return div;
+}
+
 static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate,
 		unsigned long *best_parent_rate)
 {
@@ -267,7 +279,7 @@ static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate,
 	 */
 	maxdiv = min(ULONG_MAX / rate, maxdiv);
 
-	for (i = 1; i <= maxdiv; i++) {
+	for (i = 1; i <= maxdiv; i = _next_div(divider, i)) {
 		if (!_is_valid_div(divider, i))
 			continue;
 		if (rate * i == parent_rate_saved) {
-- 
cgit v1.2.3


From 4bac65ca7d86b7e219138706e9f687753ccbfee9 Mon Sep 17 00:00:00 2001
From: Alex Elder <elder@linaro.org>
Date: Mon, 21 Apr 2014 16:11:37 -0500
Subject: clk: bcm281xx: warn if ccu_wait_bit() fails

Don't let a failure of ccu_wait_bit() go unnoticed.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/bcm/clk-kona.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers')

diff --git a/drivers/clk/bcm/clk-kona.c b/drivers/clk/bcm/clk-kona.c
index db11a87449f2..4b4e35aeb778 100644
--- a/drivers/clk/bcm/clk-kona.c
+++ b/drivers/clk/bcm/clk-kona.c
@@ -207,6 +207,9 @@ __ccu_wait_bit(struct ccu_data *ccu, u32 reg_offset, u32 bit, bool want)
 			return true;
 		udelay(1);
 	}
+	pr_warn("%s: %s/0x%04x bit %u was never %s\n", __func__,
+		ccu->name, reg_offset, bit, want ? "set" : "clear");
+
 	return false;
 }
 
-- 
cgit v1.2.3


From e756325206ebf284d00410077ea43eb53de8e9bf Mon Sep 17 00:00:00 2001
From: Alex Elder <elder@linaro.org>
Date: Mon, 21 Apr 2014 16:11:38 -0500
Subject: clk: bcm281xx: use init_data.name for clock name

Use the init_data.name field to hold the name of a Kona clock rather
than duplicating it.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/bcm/clk-kona-setup.c |  6 +++---
 drivers/clk/bcm/clk-kona.c       | 17 ++++++++++-------
 drivers/clk/bcm/clk-kona.h       |  3 +--
 3 files changed, 14 insertions(+), 12 deletions(-)

(limited to 'drivers')

diff --git a/drivers/clk/bcm/clk-kona-setup.c b/drivers/clk/bcm/clk-kona-setup.c
index 54a06526f64f..9e7a9c11c951 100644
--- a/drivers/clk/bcm/clk-kona-setup.c
+++ b/drivers/clk/bcm/clk-kona-setup.c
@@ -64,7 +64,7 @@ static bool peri_clk_data_offsets_valid(struct kona_clk *bcm_clk)
 
 	BUG_ON(bcm_clk->type != bcm_clk_peri);
 	peri = bcm_clk->u.peri;
-	name = bcm_clk->name;
+	name = bcm_clk->init_data.name;
 	range = bcm_clk->ccu->range;
 
 	limit = range - sizeof(u32);
@@ -330,7 +330,7 @@ peri_clk_data_valid(struct kona_clk *bcm_clk)
 		return false;
 
 	peri = bcm_clk->u.peri;
-	name = bcm_clk->name;
+	name = bcm_clk->init_data.name;
 	gate = &peri->gate;
 	if (gate_exists(gate) && !gate_valid(gate, "gate", name))
 		return false;
@@ -631,7 +631,7 @@ struct clk *kona_clk_setup(struct ccu_data *ccu, const char *name,
 		return NULL;
 	}
 	bcm_clk->ccu = ccu;
-	bcm_clk->name = name;
+	bcm_clk->init_data.name = name;
 
 	init_data = &bcm_clk->init_data;
 	init_data->name = name;
diff --git a/drivers/clk/bcm/clk-kona.c b/drivers/clk/bcm/clk-kona.c
index 4b4e35aeb778..bf0b70e87014 100644
--- a/drivers/clk/bcm/clk-kona.c
+++ b/drivers/clk/bcm/clk-kona.c
@@ -809,7 +809,7 @@ static int kona_peri_clk_enable(struct clk_hw *hw)
 	struct kona_clk *bcm_clk = to_kona_clk(hw);
 	struct bcm_clk_gate *gate = &bcm_clk->u.peri->gate;
 
-	return clk_gate(bcm_clk->ccu, bcm_clk->name, gate, true);
+	return clk_gate(bcm_clk->ccu, bcm_clk->init_data.name, gate, true);
 }
 
 static void kona_peri_clk_disable(struct clk_hw *hw)
@@ -817,7 +817,7 @@ static void kona_peri_clk_disable(struct clk_hw *hw)
 	struct kona_clk *bcm_clk = to_kona_clk(hw);
 	struct bcm_clk_gate *gate = &bcm_clk->u.peri->gate;
 
-	(void)clk_gate(bcm_clk->ccu, bcm_clk->name, gate, false);
+	(void)clk_gate(bcm_clk->ccu, bcm_clk->init_data.name, gate, false);
 }
 
 static int kona_peri_clk_is_enabled(struct clk_hw *hw)
@@ -875,12 +875,13 @@ static int kona_peri_clk_set_parent(struct clk_hw *hw, u8 index)
 
 	ret = selector_write(bcm_clk->ccu, &data->gate, sel, trig, index);
 	if (ret == -ENXIO) {
-		pr_err("%s: gating failure for %s\n", __func__, bcm_clk->name);
+		pr_err("%s: gating failure for %s\n", __func__,
+			bcm_clk->init_data.name);
 		ret = -EIO;	/* Don't proliferate weird errors */
 	} else if (ret == -EIO) {
 		pr_err("%s: %strigger failed for %s\n", __func__,
 			trig == &data->pre_trig ? "pre-" : "",
-			bcm_clk->name);
+			bcm_clk->init_data.name);
 	}
 
 	return ret;
@@ -939,10 +940,12 @@ static int kona_peri_clk_set_rate(struct clk_hw *hw, unsigned long rate,
 	ret = divider_write(bcm_clk->ccu, &data->gate, &data->div,
 				&data->trig, scaled_div);
 	if (ret == -ENXIO) {
-		pr_err("%s: gating failure for %s\n", __func__, bcm_clk->name);
+		pr_err("%s: gating failure for %s\n", __func__,
+			bcm_clk->init_data.name);
 		ret = -EIO;	/* Don't proliferate weird errors */
 	} else if (ret == -EIO) {
-		pr_err("%s: trigger failed for %s\n", __func__, bcm_clk->name);
+		pr_err("%s: trigger failed for %s\n", __func__,
+			bcm_clk->init_data.name);
 	}
 
 	return ret;
@@ -964,7 +967,7 @@ static bool __peri_clk_init(struct kona_clk *bcm_clk)
 {
 	struct ccu_data *ccu = bcm_clk->ccu;
 	struct peri_clk_data *peri = bcm_clk->u.peri;
-	const char *name = bcm_clk->name;
+	const char *name = bcm_clk->init_data.name;
 	struct bcm_clk_trig *trig;
 
 	BUG_ON(bcm_clk->type != bcm_clk_peri);
diff --git a/drivers/clk/bcm/clk-kona.h b/drivers/clk/bcm/clk-kona.h
index dee690951bb6..1a7eba4ac33a 100644
--- a/drivers/clk/bcm/clk-kona.h
+++ b/drivers/clk/bcm/clk-kona.h
@@ -373,8 +373,7 @@ struct peri_clk_data {
 
 struct kona_clk {
 	struct clk_hw hw;
-	struct clk_init_data init_data;
-	const char *name;	/* name of this clock */
+	struct clk_init_data init_data;	/* includes name of this clock */
 	struct ccu_data *ccu;	/* ccu this clock is associated with */
 	enum bcm_clk_type type;
 	union {
-- 
cgit v1.2.3


From 9d3d87c750f30af0e8e268c122ffec4489bc9638 Mon Sep 17 00:00:00 2001
From: Alex Elder <elder@linaro.org>
Date: Mon, 21 Apr 2014 16:11:39 -0500
Subject: clk: bcm281xx: change some symbol names

As I developed the bcm281xx clock code I understood there were
restrictions on device tree "compatible" strings names, and as a
result "bcm11351" was used in places despite the part family being
more properly called "bcm281xx".  This can be a little confusing.

In some cases I went to far and things using "bcm11351" when that
was not necessary.

This patch remedies this.  It renames the symbol used to define the
"compatible" string (but not its value) so it uses "BCM281XX".
Similarly, the name names provided to the CLK_OF_DECLARE() macro
are changed, hoping to minimize the number of places that the
confusing "11351" string is used.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/bcm/clk-bcm281xx.c | 27 ++++++++++++++++-----------
 1 file changed, 16 insertions(+), 11 deletions(-)

(limited to 'drivers')

diff --git a/drivers/clk/bcm/clk-bcm281xx.c b/drivers/clk/bcm/clk-bcm281xx.c
index 3c66de696aeb..bb947afadb88 100644
--- a/drivers/clk/bcm/clk-bcm281xx.c
+++ b/drivers/clk/bcm/clk-bcm281xx.c
@@ -15,12 +15,17 @@
 #include "clk-kona.h"
 #include "dt-bindings/clock/bcm281xx.h"
 
-/* bcm11351 CCU device tree "compatible" strings */
-#define BCM11351_DT_ROOT_CCU_COMPAT	"brcm,bcm11351-root-ccu"
-#define BCM11351_DT_AON_CCU_COMPAT	"brcm,bcm11351-aon-ccu"
-#define BCM11351_DT_HUB_CCU_COMPAT	"brcm,bcm11351-hub-ccu"
-#define BCM11351_DT_MASTER_CCU_COMPAT	"brcm,bcm11351-master-ccu"
-#define BCM11351_DT_SLAVE_CCU_COMPAT	"brcm,bcm11351-slave-ccu"
+/*
+ * These are the bcm281xx CCU device tree "compatible" strings.
+ * We're stuck with using "bcm11351" in the string because wild
+ * cards aren't allowed, and that name was the first one defined
+ * in this family of devices.
+ */
+#define BCM281XX_DT_ROOT_CCU_COMPAT	"brcm,bcm11351-root-ccu"
+#define BCM281XX_DT_AON_CCU_COMPAT	"brcm,bcm11351-aon-ccu"
+#define BCM281XX_DT_HUB_CCU_COMPAT	"brcm,bcm11351-hub-ccu"
+#define BCM281XX_DT_MASTER_CCU_COMPAT	"brcm,bcm11351-master-ccu"
+#define BCM281XX_DT_SLAVE_CCU_COMPAT	"brcm,bcm11351-slave-ccu"
 
 /* Root CCU clocks */
 
@@ -404,13 +409,13 @@ static void __init kona_dt_slave_ccu_setup(struct device_node *node)
 	kona_dt_ccu_setup(node, bcm281xx_slave_ccu_clks_setup);
 }
 
-CLK_OF_DECLARE(bcm11351_root_ccu, BCM11351_DT_ROOT_CCU_COMPAT,
+CLK_OF_DECLARE(bcm281xx_root_ccu, BCM281XX_DT_ROOT_CCU_COMPAT,
 			kona_dt_root_ccu_setup);
-CLK_OF_DECLARE(bcm11351_aon_ccu, BCM11351_DT_AON_CCU_COMPAT,
+CLK_OF_DECLARE(bcm281xx_aon_ccu, BCM281XX_DT_AON_CCU_COMPAT,
 			kona_dt_aon_ccu_setup);
-CLK_OF_DECLARE(bcm11351_hub_ccu, BCM11351_DT_HUB_CCU_COMPAT,
+CLK_OF_DECLARE(bcm281xx_hub_ccu, BCM281XX_DT_HUB_CCU_COMPAT,
 			kona_dt_hub_ccu_setup);
-CLK_OF_DECLARE(bcm11351_master_ccu, BCM11351_DT_MASTER_CCU_COMPAT,
+CLK_OF_DECLARE(bcm281xx_master_ccu, BCM281XX_DT_MASTER_CCU_COMPAT,
 			kona_dt_master_ccu_setup);
-CLK_OF_DECLARE(bcm11351_slave_ccu, BCM11351_DT_SLAVE_CCU_COMPAT,
+CLK_OF_DECLARE(bcm281xx_slave_ccu, BCM281XX_DT_SLAVE_CCU_COMPAT,
 			kona_dt_slave_ccu_setup);
-- 
cgit v1.2.3


From b12151ca5cd76e5ed9c75ef02b2f5d2aa5b45808 Mon Sep 17 00:00:00 2001
From: Alex Elder <elder@linaro.org>
Date: Mon, 21 Apr 2014 16:11:40 -0500
Subject: clk: bcm281xx: initialize CCU structures statically

We know up front how many CCU's we'll support, so there's no need to
allocate their data structures dynamically.  Define a macro
KONA_CCU_COMMON() to simplify the initialization of many of the
fields in a ccu_data structure.  Pass the address of a statically
defined CCU structure to kona_dt_ccu_setup() rather than having that
function allocate one.

We also know at build time how many clocks a given CCU will provide,
though the number of of them for each CCU is different.  Record the
number of clocks we need in the CCU's clk_onecell_data struct
(which is used when we register the CCU with the common clock code
as a clock provider).  Rename that struct field "clk_data" (because
"data" alone gets a little confusing).

Use the known clock count to move the allocation of each CCU's
clocks array into ccu_clks_setup() rather than having each CCU's
setup callback function do it.

(The real motivation behind all of this is that we'll be doing some
static initialization of some additional CCU-specific data soon.)

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/bcm/clk-bcm281xx.c   | 144 ++++++++++++++++-----------------------
 drivers/clk/bcm/clk-kona-setup.c |  47 ++++++-------
 drivers/clk/bcm/clk-kona.c       |   4 +-
 drivers/clk/bcm/clk-kona.h       |  21 ++++--
 4 files changed, 97 insertions(+), 119 deletions(-)

(limited to 'drivers')

diff --git a/drivers/clk/bcm/clk-bcm281xx.c b/drivers/clk/bcm/clk-bcm281xx.c
index bb947afadb88..d72f2ae01493 100644
--- a/drivers/clk/bcm/clk-bcm281xx.c
+++ b/drivers/clk/bcm/clk-bcm281xx.c
@@ -15,6 +15,9 @@
 #include "clk-kona.h"
 #include "dt-bindings/clock/bcm281xx.h"
 
+#define BCM281XX_CCU_COMMON(_name, _ucase_name) \
+	KONA_CCU_COMMON(BCM281XX, _name, _ucase_name)
+
 /*
  * These are the bcm281xx CCU device tree "compatible" strings.
  * We're stuck with using "bcm11351" in the string because wild
@@ -27,7 +30,7 @@
 #define BCM281XX_DT_MASTER_CCU_COMPAT	"brcm,bcm11351-master-ccu"
 #define BCM281XX_DT_SLAVE_CCU_COMPAT	"brcm,bcm11351-slave-ccu"
 
-/* Root CCU clocks */
+/* Root CCU */
 
 static struct peri_clk_data frac_1m_data = {
 	.gate		= HW_SW_GATE(0x214, 16, 0, 1),
@@ -36,7 +39,11 @@ static struct peri_clk_data frac_1m_data = {
 	.clocks		= CLOCKS("ref_crystal"),
 };
 
-/* AON CCU clocks */
+static struct ccu_data root_ccu_data = {
+	BCM281XX_CCU_COMMON(root, ROOT),
+};
+
+/* AON CCU */
 
 static struct peri_clk_data hub_timer_data = {
 	.gate		= HW_SW_GATE(0x0414, 16, 0, 1),
@@ -65,7 +72,11 @@ static struct peri_clk_data pmu_bsc_var_data = {
 	.trig		= TRIGGER(0x0a40, 2),
 };
 
-/* Hub CCU clocks */
+static struct ccu_data aon_ccu_data = {
+	BCM281XX_CCU_COMMON(aon, AON),
+};
+
+/* Hub CCU */
 
 static struct peri_clk_data tmon_1m_data = {
 	.gate		= HW_SW_GATE(0x04a4, 18, 2, 3),
@@ -75,7 +86,11 @@ static struct peri_clk_data tmon_1m_data = {
 	.trig		= TRIGGER(0x0e84, 1),
 };
 
-/* Master CCU clocks */
+static struct ccu_data hub_ccu_data = {
+	BCM281XX_CCU_COMMON(hub, HUB),
+};
+
+/* Master CCU */
 
 static struct peri_clk_data sdio1_data = {
 	.gate		= HW_SW_GATE(0x0358, 18, 2, 3),
@@ -158,7 +173,11 @@ static struct peri_clk_data hsic2_12m_data = {
 	.trig		= TRIGGER(0x0afc, 5),
 };
 
-/* Slave CCU clocks */
+static struct ccu_data master_ccu_data = {
+	BCM281XX_CCU_COMMON(master, MASTER),
+};
+
+/* Slave CCU */
 
 static struct peri_clk_data uartb_data = {
 	.gate		= HW_SW_GATE(0x0400, 18, 2, 3),
@@ -266,6 +285,10 @@ static struct peri_clk_data pwm_data = {
 	.trig		= TRIGGER(0x0afc, 15),
 };
 
+static struct ccu_data slave_ccu_data = {
+	BCM281XX_CCU_COMMON(slave, SLAVE),
+};
+
 /*
  * CCU setup routines
  *
@@ -277,107 +300,52 @@ static struct peri_clk_data pwm_data = {
  */
 static int __init bcm281xx_root_ccu_clks_setup(struct ccu_data *ccu)
 {
-	struct clk **clks;
-	size_t count = BCM281XX_ROOT_CCU_CLOCK_COUNT;
-
-	clks = kzalloc(count * sizeof(*clks), GFP_KERNEL);
-	if (!clks) {
-		pr_err("%s: failed to allocate root clocks\n", __func__);
-		return -ENOMEM;
-	}
-	ccu->data.clks = clks;
-	ccu->data.clk_num = count;
-
-	PERI_CLK_SETUP(clks, ccu, BCM281XX_ROOT_CCU_FRAC_1M, frac_1m);
+	PERI_CLK_SETUP(ccu, BCM281XX_ROOT_CCU_FRAC_1M, frac_1m);
 
 	return 0;
 }
 
 static int __init bcm281xx_aon_ccu_clks_setup(struct ccu_data *ccu)
 {
-	struct clk **clks;
-	size_t count = BCM281XX_AON_CCU_CLOCK_COUNT;
-
-	clks = kzalloc(count * sizeof(*clks), GFP_KERNEL);
-	if (!clks) {
-		pr_err("%s: failed to allocate aon clocks\n", __func__);
-		return -ENOMEM;
-	}
-	ccu->data.clks = clks;
-	ccu->data.clk_num = count;
-
-	PERI_CLK_SETUP(clks, ccu, BCM281XX_AON_CCU_HUB_TIMER, hub_timer);
-	PERI_CLK_SETUP(clks, ccu, BCM281XX_AON_CCU_PMU_BSC, pmu_bsc);
-	PERI_CLK_SETUP(clks, ccu, BCM281XX_AON_CCU_PMU_BSC_VAR, pmu_bsc_var);
+	PERI_CLK_SETUP(ccu, BCM281XX_AON_CCU_HUB_TIMER, hub_timer);
+	PERI_CLK_SETUP(ccu, BCM281XX_AON_CCU_PMU_BSC, pmu_bsc);
+	PERI_CLK_SETUP(ccu, BCM281XX_AON_CCU_PMU_BSC_VAR, pmu_bsc_var);
 
 	return 0;
 }
 
 static int __init bcm281xx_hub_ccu_clks_setup(struct ccu_data *ccu)
 {
-	struct clk **clks;
-	size_t count = BCM281XX_HUB_CCU_CLOCK_COUNT;
-
-	clks = kzalloc(count * sizeof(*clks), GFP_KERNEL);
-	if (!clks) {
-		pr_err("%s: failed to allocate hub clocks\n", __func__);
-		return -ENOMEM;
-	}
-	ccu->data.clks = clks;
-	ccu->data.clk_num = count;
-
-	PERI_CLK_SETUP(clks, ccu, BCM281XX_HUB_CCU_TMON_1M, tmon_1m);
+	PERI_CLK_SETUP(ccu, BCM281XX_HUB_CCU_TMON_1M, tmon_1m);
 
 	return 0;
 }
 
 static int __init bcm281xx_master_ccu_clks_setup(struct ccu_data *ccu)
 {
-	struct clk **clks;
-	size_t count = BCM281XX_MASTER_CCU_CLOCK_COUNT;
-
-	clks = kzalloc(count * sizeof(*clks), GFP_KERNEL);
-	if (!clks) {
-		pr_err("%s: failed to allocate master clocks\n", __func__);
-		return -ENOMEM;
-	}
-	ccu->data.clks = clks;
-	ccu->data.clk_num = count;
-
-	PERI_CLK_SETUP(clks, ccu, BCM281XX_MASTER_CCU_SDIO1, sdio1);
-	PERI_CLK_SETUP(clks, ccu, BCM281XX_MASTER_CCU_SDIO2, sdio2);
-	PERI_CLK_SETUP(clks, ccu, BCM281XX_MASTER_CCU_SDIO3, sdio3);
-	PERI_CLK_SETUP(clks, ccu, BCM281XX_MASTER_CCU_SDIO4, sdio4);
-	PERI_CLK_SETUP(clks, ccu, BCM281XX_MASTER_CCU_USB_IC, usb_ic);
-	PERI_CLK_SETUP(clks, ccu, BCM281XX_MASTER_CCU_HSIC2_48M, hsic2_48m);
-	PERI_CLK_SETUP(clks, ccu, BCM281XX_MASTER_CCU_HSIC2_12M, hsic2_12m);
+	PERI_CLK_SETUP(ccu, BCM281XX_MASTER_CCU_SDIO1, sdio1);
+	PERI_CLK_SETUP(ccu, BCM281XX_MASTER_CCU_SDIO2, sdio2);
+	PERI_CLK_SETUP(ccu, BCM281XX_MASTER_CCU_SDIO3, sdio3);
+	PERI_CLK_SETUP(ccu, BCM281XX_MASTER_CCU_SDIO4, sdio4);
+	PERI_CLK_SETUP(ccu, BCM281XX_MASTER_CCU_USB_IC, usb_ic);
+	PERI_CLK_SETUP(ccu, BCM281XX_MASTER_CCU_HSIC2_48M, hsic2_48m);
+	PERI_CLK_SETUP(ccu, BCM281XX_MASTER_CCU_HSIC2_12M, hsic2_12m);
 
 	return 0;
 }
 
 static int __init bcm281xx_slave_ccu_clks_setup(struct ccu_data *ccu)
 {
-	struct clk **clks;
-	size_t count = BCM281XX_SLAVE_CCU_CLOCK_COUNT;
-
-	clks = kzalloc(count * sizeof(*clks), GFP_KERNEL);
-	if (!clks) {
-		pr_err("%s: failed to allocate slave clocks\n", __func__);
-		return -ENOMEM;
-	}
-	ccu->data.clks = clks;
-	ccu->data.clk_num = count;
-
-	PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_UARTB, uartb);
-	PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_UARTB2, uartb2);
-	PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_UARTB3, uartb3);
-	PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_UARTB4, uartb4);
-	PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_SSP0, ssp0);
-	PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_SSP2, ssp2);
-	PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_BSC1, bsc1);
-	PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_BSC2, bsc2);
-	PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_BSC3, bsc3);
-	PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_PWM, pwm);
+	PERI_CLK_SETUP(ccu, BCM281XX_SLAVE_CCU_UARTB, uartb);
+	PERI_CLK_SETUP(ccu, BCM281XX_SLAVE_CCU_UARTB2, uartb2);
+	PERI_CLK_SETUP(ccu, BCM281XX_SLAVE_CCU_UARTB3, uartb3);
+	PERI_CLK_SETUP(ccu, BCM281XX_SLAVE_CCU_UARTB4, uartb4);
+	PERI_CLK_SETUP(ccu, BCM281XX_SLAVE_CCU_SSP0, ssp0);
+	PERI_CLK_SETUP(ccu, BCM281XX_SLAVE_CCU_SSP2, ssp2);
+	PERI_CLK_SETUP(ccu, BCM281XX_SLAVE_CCU_BSC1, bsc1);
+	PERI_CLK_SETUP(ccu, BCM281XX_SLAVE_CCU_BSC2, bsc2);
+	PERI_CLK_SETUP(ccu, BCM281XX_SLAVE_CCU_BSC3, bsc3);
+	PERI_CLK_SETUP(ccu, BCM281XX_SLAVE_CCU_PWM, pwm);
 
 	return 0;
 }
@@ -386,27 +354,29 @@ static int __init bcm281xx_slave_ccu_clks_setup(struct ccu_data *ccu)
 
 static void __init kona_dt_root_ccu_setup(struct device_node *node)
 {
-	kona_dt_ccu_setup(node, bcm281xx_root_ccu_clks_setup);
+	kona_dt_ccu_setup(&root_ccu_data, node, bcm281xx_root_ccu_clks_setup);
 }
 
 static void __init kona_dt_aon_ccu_setup(struct device_node *node)
 {
-	kona_dt_ccu_setup(node, bcm281xx_aon_ccu_clks_setup);
+	kona_dt_ccu_setup(&aon_ccu_data, node, bcm281xx_aon_ccu_clks_setup);
 }
 
 static void __init kona_dt_hub_ccu_setup(struct device_node *node)
 {
-	kona_dt_ccu_setup(node, bcm281xx_hub_ccu_clks_setup);
+	kona_dt_ccu_setup(&hub_ccu_data, node, bcm281xx_hub_ccu_clks_setup);
 }
 
 static void __init kona_dt_master_ccu_setup(struct device_node *node)
 {
-	kona_dt_ccu_setup(node, bcm281xx_master_ccu_clks_setup);
+	kona_dt_ccu_setup(&master_ccu_data, node,
+			bcm281xx_master_ccu_clks_setup);
 }
 
 static void __init kona_dt_slave_ccu_setup(struct device_node *node)
 {
-	kona_dt_ccu_setup(node, bcm281xx_slave_ccu_clks_setup);
+	kona_dt_ccu_setup(&slave_ccu_data, node,
+			bcm281xx_slave_ccu_clks_setup);
 }
 
 CLK_OF_DECLARE(bcm281xx_root_ccu, BCM281XX_DT_ROOT_CCU_COMPAT,
diff --git a/drivers/clk/bcm/clk-kona-setup.c b/drivers/clk/bcm/clk-kona-setup.c
index 9e7a9c11c951..4d1ca5372eff 100644
--- a/drivers/clk/bcm/clk-kona-setup.c
+++ b/drivers/clk/bcm/clk-kona-setup.c
@@ -675,50 +675,49 @@ static void ccu_clks_teardown(struct ccu_data *ccu)
 {
 	u32 i;
 
-	for (i = 0; i < ccu->data.clk_num; i++)
-		kona_clk_teardown(ccu->data.clks[i]);
-	kfree(ccu->data.clks);
+	for (i = 0; i < ccu->clk_data.clk_num; i++)
+		kona_clk_teardown(ccu->clk_data.clks[i]);
+	kfree(ccu->clk_data.clks);
 }
 
 static void kona_ccu_teardown(struct ccu_data *ccu)
 {
-	if (!ccu)
-		return;
-
+	kfree(ccu->clk_data.clks);
+	ccu->clk_data.clks = NULL;
 	if (!ccu->base)
-		goto done;
+		return;
 
 	of_clk_del_provider(ccu->node);	/* safe if never added */
 	ccu_clks_teardown(ccu);
 	list_del(&ccu->links);
 	of_node_put(ccu->node);
+	ccu->node = NULL;
 	iounmap(ccu->base);
-done:
-	kfree(ccu->name);
-	kfree(ccu);
+	ccu->base = NULL;
 }
 
 /*
  * Set up a CCU.  Call the provided ccu_clks_setup callback to
  * initialize the array of clocks provided by the CCU.
  */
-void __init kona_dt_ccu_setup(struct device_node *node,
+void __init kona_dt_ccu_setup(struct ccu_data *ccu,
+			struct device_node *node,
 			int (*ccu_clks_setup)(struct ccu_data *))
 {
-	struct ccu_data *ccu;
 	struct resource res = { 0 };
 	resource_size_t range;
 	int ret;
 
-	ccu = kzalloc(sizeof(*ccu), GFP_KERNEL);
-	if (ccu)
-		ccu->name = kstrdup(node->name, GFP_KERNEL);
-	if (!ccu || !ccu->name) {
-		pr_err("%s: unable to allocate CCU struct for %s\n",
-			__func__, node->name);
-		kfree(ccu);
+	if (ccu->clk_data.clk_num) {
+		size_t size;
 
-		return;
+		size = ccu->clk_data.clk_num * sizeof(*ccu->clk_data.clks);
+		ccu->clk_data.clks = kzalloc(size, GFP_KERNEL);
+		if (!ccu->clk_data.clks) {
+			pr_err("%s: unable to allocate %u clocks for %s\n",
+				__func__, ccu->clk_data.clk_num, node->name);
+			return;
+		}
 	}
 
 	ret = of_address_to_resource(node, 0, &res);
@@ -742,18 +741,14 @@ void __init kona_dt_ccu_setup(struct device_node *node,
 			node->name);
 		goto out_err;
 	}
-
-	spin_lock_init(&ccu->lock);
-	INIT_LIST_HEAD(&ccu->links);
 	ccu->node = of_node_get(node);
-
 	list_add_tail(&ccu->links, &ccu_list);
 
-	/* Set up clocks array (in ccu->data) */
+	/* Set up clocks array (in ccu->clk_data) */
 	if (ccu_clks_setup(ccu))
 		goto out_err;
 
-	ret = of_clk_add_provider(node, of_clk_src_onecell_get, &ccu->data);
+	ret = of_clk_add_provider(node, of_clk_src_onecell_get, &ccu->clk_data);
 	if (ret) {
 		pr_err("%s: error adding ccu %s as provider (%d)\n", __func__,
 				node->name, ret);
diff --git a/drivers/clk/bcm/clk-kona.c b/drivers/clk/bcm/clk-kona.c
index bf0b70e87014..f8bc6bc0784f 100644
--- a/drivers/clk/bcm/clk-kona.c
+++ b/drivers/clk/bcm/clk-kona.c
@@ -1020,13 +1020,13 @@ bool __init kona_ccu_init(struct ccu_data *ccu)
 {
 	unsigned long flags;
 	unsigned int which;
-	struct clk **clks = ccu->data.clks;
+	struct clk **clks = ccu->clk_data.clks;
 	bool success = true;
 
 	flags = ccu_lock(ccu);
 	__ccu_write_enable(ccu);
 
-	for (which = 0; which < ccu->data.clk_num; which++) {
+	for (which = 0; which < ccu->clk_data.clk_num; which++) {
 		struct kona_clk *bcm_clk;
 
 		if (!clks[which])
diff --git a/drivers/clk/bcm/clk-kona.h b/drivers/clk/bcm/clk-kona.h
index 1a7eba4ac33a..108c2647ca28 100644
--- a/drivers/clk/bcm/clk-kona.h
+++ b/drivers/clk/bcm/clk-kona.h
@@ -85,11 +85,20 @@ struct ccu_data {
 	bool write_enabled;	/* write access is currently enabled */
 	struct list_head links;	/* for ccu_list */
 	struct device_node *node;
-	struct clk_onecell_data data;
+	struct clk_onecell_data clk_data;
 	const char *name;
 	u32 range;		/* byte range of address space */
 };
 
+/* Initialization for common fields in a Kona ccu_data structure */
+#define KONA_CCU_COMMON(_prefix, _name, _ucase_name)			    \
+	.name		= #_name "_ccu",				    \
+	.lock		= __SPIN_LOCK_UNLOCKED(_name ## _ccu_data.lock),    \
+	.links		= LIST_HEAD_INIT(_name ## _ccu_data.links),	    \
+	.clk_data	= {						    \
+		.clk_num = _prefix ## _ ## _ucase_name ## _CCU_CLOCK_COUNT, \
+	}
+
 /*
  * Gating control and status is managed by a 32-bit gate register.
  *
@@ -390,8 +399,11 @@ extern struct clk_ops kona_peri_clk_ops;
 
 /* Help functions */
 
-#define PERI_CLK_SETUP(clks, ccu, id, name) \
-	clks[id] = kona_clk_setup(ccu, #name, bcm_clk_peri, &name ## _data)
+#define KONA_CLK_SETUP(_ccu, _type, _name) \
+	kona_clk_setup((_ccu), #_name, bcm_clk_## _type, &_name ## _data)
+
+#define PERI_CLK_SETUP(_ccu, _id, _name) \
+	(_ccu)->clk_data.clks[_id] = KONA_CLK_SETUP((_ccu), peri, _name)
 
 /* Externally visible functions */
 
@@ -402,7 +414,8 @@ extern u64 scaled_div_build(struct bcm_clk_div *div, u32 div_value,
 
 extern struct clk *kona_clk_setup(struct ccu_data *ccu, const char *name,
 			enum bcm_clk_type type, void *data);
-extern void __init kona_dt_ccu_setup(struct device_node *node,
+extern void __init kona_dt_ccu_setup(struct ccu_data *ccu,
+			struct device_node *node,
 			int (*ccu_clks_setup)(struct ccu_data *));
 extern bool __init kona_ccu_init(struct ccu_data *ccu);
 
-- 
cgit v1.2.3


From 03548ec06ad3ec75d5b212fa832e4e617334ea09 Mon Sep 17 00:00:00 2001
From: Alex Elder <elder@linaro.org>
Date: Mon, 21 Apr 2014 16:11:41 -0500
Subject: clk: bcm281xx: define CCU clock data statically

Rather than "manually" setting up each CCU's clock entries at run
time, define a flexible array of generic Kona clock structures
within the CCU structure itself.  Each of these entries contains
generic kona clock information (like its CCU pointer and clock
framework initialization data).  Each also has a pointer to a
structure contianing clock type-dependent initialization data
(like register definitions).

Since we'll iterate over these arrays we need to be sure they have
slots for all potential clock index values.  (E.g. for the root CCU
we must have at least BCM281XX_ROOT_CCU_CLOCK_COUNT slots.)  To
ensure this we always define an extra entry and fill it using the
special initializer LAST_KONA_CLK.

Just about everything we need to know about a clock can be defined
statically.  As a result, kona_clk_setup() can be changed to take
just a kona_clk structure as its argument, and peri_clk_setup() can
be simplified.  With the information pre-defined we are also able
to handle most clock setup genericially.  We can do away with the
CCU-specific callback functions that previously were needed to set
up the entries in CCU's clock array.

Move the definition of the ccu_data structure down in "clk-kona.h"
to avoid a forward dependency.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/bcm/clk-bcm281xx.c   | 132 +++++++++++++++++++--------------------
 drivers/clk/bcm/clk-kona-setup.c |  60 ++++++++----------
 drivers/clk/bcm/clk-kona.h       |  84 +++++++++++++------------
 3 files changed, 133 insertions(+), 143 deletions(-)

(limited to 'drivers')

diff --git a/drivers/clk/bcm/clk-bcm281xx.c b/drivers/clk/bcm/clk-bcm281xx.c
index d72f2ae01493..71a65a49f1a4 100644
--- a/drivers/clk/bcm/clk-bcm281xx.c
+++ b/drivers/clk/bcm/clk-bcm281xx.c
@@ -41,6 +41,11 @@ static struct peri_clk_data frac_1m_data = {
 
 static struct ccu_data root_ccu_data = {
 	BCM281XX_CCU_COMMON(root, ROOT),
+	.kona_clks	= {
+		[BCM281XX_ROOT_CCU_FRAC_1M] =
+			KONA_CLK(root, frac_1m, peri),
+		[BCM281XX_ROOT_CCU_CLOCK_COUNT] = LAST_KONA_CLK,
+	},
 };
 
 /* AON CCU */
@@ -74,6 +79,15 @@ static struct peri_clk_data pmu_bsc_var_data = {
 
 static struct ccu_data aon_ccu_data = {
 	BCM281XX_CCU_COMMON(aon, AON),
+	.kona_clks	= {
+		[BCM281XX_AON_CCU_HUB_TIMER] =
+			KONA_CLK(aon, hub_timer, peri),
+		[BCM281XX_AON_CCU_PMU_BSC] =
+			KONA_CLK(aon, pmu_bsc, peri),
+		[BCM281XX_AON_CCU_PMU_BSC_VAR] =
+			KONA_CLK(aon, pmu_bsc_var, peri),
+		[BCM281XX_AON_CCU_CLOCK_COUNT] = LAST_KONA_CLK,
+	},
 };
 
 /* Hub CCU */
@@ -88,6 +102,11 @@ static struct peri_clk_data tmon_1m_data = {
 
 static struct ccu_data hub_ccu_data = {
 	BCM281XX_CCU_COMMON(hub, HUB),
+	.kona_clks	= {
+		[BCM281XX_HUB_CCU_TMON_1M] =
+			KONA_CLK(hub, tmon_1m, peri),
+		[BCM281XX_HUB_CCU_CLOCK_COUNT] = LAST_KONA_CLK,
+	},
 };
 
 /* Master CCU */
@@ -175,6 +194,23 @@ static struct peri_clk_data hsic2_12m_data = {
 
 static struct ccu_data master_ccu_data = {
 	BCM281XX_CCU_COMMON(master, MASTER),
+	.kona_clks	= {
+		[BCM281XX_MASTER_CCU_SDIO1] =
+			KONA_CLK(master, sdio1, peri),
+		[BCM281XX_MASTER_CCU_SDIO2] =
+			KONA_CLK(master, sdio2, peri),
+		[BCM281XX_MASTER_CCU_SDIO3] =
+			KONA_CLK(master, sdio3, peri),
+		[BCM281XX_MASTER_CCU_SDIO4] =
+			KONA_CLK(master, sdio4, peri),
+		[BCM281XX_MASTER_CCU_USB_IC] =
+			KONA_CLK(master, usb_ic, peri),
+		[BCM281XX_MASTER_CCU_HSIC2_48M] =
+			KONA_CLK(master, hsic2_48m, peri),
+		[BCM281XX_MASTER_CCU_HSIC2_12M] =
+			KONA_CLK(master, hsic2_12m, peri),
+		[BCM281XX_MASTER_CCU_CLOCK_COUNT] = LAST_KONA_CLK,
+	},
 };
 
 /* Slave CCU */
@@ -287,96 +323,56 @@ static struct peri_clk_data pwm_data = {
 
 static struct ccu_data slave_ccu_data = {
 	BCM281XX_CCU_COMMON(slave, SLAVE),
+	.kona_clks	= {
+		[BCM281XX_SLAVE_CCU_UARTB] =
+			KONA_CLK(slave, uartb, peri),
+		[BCM281XX_SLAVE_CCU_UARTB2] =
+			KONA_CLK(slave, uartb2, peri),
+		[BCM281XX_SLAVE_CCU_UARTB3] =
+			KONA_CLK(slave, uartb3, peri),
+		[BCM281XX_SLAVE_CCU_UARTB4] =
+			KONA_CLK(slave, uartb4, peri),
+		[BCM281XX_SLAVE_CCU_SSP0] =
+			KONA_CLK(slave, ssp0, peri),
+		[BCM281XX_SLAVE_CCU_SSP2] =
+			KONA_CLK(slave, ssp2, peri),
+		[BCM281XX_SLAVE_CCU_BSC1] =
+			KONA_CLK(slave, bsc1, peri),
+		[BCM281XX_SLAVE_CCU_BSC2] =
+			KONA_CLK(slave, bsc2, peri),
+		[BCM281XX_SLAVE_CCU_BSC3] =
+			KONA_CLK(slave, bsc3, peri),
+		[BCM281XX_SLAVE_CCU_PWM] =
+			KONA_CLK(slave, pwm, peri),
+		[BCM281XX_SLAVE_CCU_CLOCK_COUNT] = LAST_KONA_CLK,
+	},
 };
 
-/*
- * CCU setup routines
- *
- * These are called from kona_dt_ccu_setup() to initialize the array
- * of clocks provided by the CCU.  Once allocated, the entries in
- * the array are initialized by calling kona_clk_setup() with the
- * initialization data for each clock.  They return 0 if successful
- * or an error code otherwise.
- */
-static int __init bcm281xx_root_ccu_clks_setup(struct ccu_data *ccu)
-{
-	PERI_CLK_SETUP(ccu, BCM281XX_ROOT_CCU_FRAC_1M, frac_1m);
-
-	return 0;
-}
-
-static int __init bcm281xx_aon_ccu_clks_setup(struct ccu_data *ccu)
-{
-	PERI_CLK_SETUP(ccu, BCM281XX_AON_CCU_HUB_TIMER, hub_timer);
-	PERI_CLK_SETUP(ccu, BCM281XX_AON_CCU_PMU_BSC, pmu_bsc);
-	PERI_CLK_SETUP(ccu, BCM281XX_AON_CCU_PMU_BSC_VAR, pmu_bsc_var);
-
-	return 0;
-}
-
-static int __init bcm281xx_hub_ccu_clks_setup(struct ccu_data *ccu)
-{
-	PERI_CLK_SETUP(ccu, BCM281XX_HUB_CCU_TMON_1M, tmon_1m);
-
-	return 0;
-}
-
-static int __init bcm281xx_master_ccu_clks_setup(struct ccu_data *ccu)
-{
-	PERI_CLK_SETUP(ccu, BCM281XX_MASTER_CCU_SDIO1, sdio1);
-	PERI_CLK_SETUP(ccu, BCM281XX_MASTER_CCU_SDIO2, sdio2);
-	PERI_CLK_SETUP(ccu, BCM281XX_MASTER_CCU_SDIO3, sdio3);
-	PERI_CLK_SETUP(ccu, BCM281XX_MASTER_CCU_SDIO4, sdio4);
-	PERI_CLK_SETUP(ccu, BCM281XX_MASTER_CCU_USB_IC, usb_ic);
-	PERI_CLK_SETUP(ccu, BCM281XX_MASTER_CCU_HSIC2_48M, hsic2_48m);
-	PERI_CLK_SETUP(ccu, BCM281XX_MASTER_CCU_HSIC2_12M, hsic2_12m);
-
-	return 0;
-}
-
-static int __init bcm281xx_slave_ccu_clks_setup(struct ccu_data *ccu)
-{
-	PERI_CLK_SETUP(ccu, BCM281XX_SLAVE_CCU_UARTB, uartb);
-	PERI_CLK_SETUP(ccu, BCM281XX_SLAVE_CCU_UARTB2, uartb2);
-	PERI_CLK_SETUP(ccu, BCM281XX_SLAVE_CCU_UARTB3, uartb3);
-	PERI_CLK_SETUP(ccu, BCM281XX_SLAVE_CCU_UARTB4, uartb4);
-	PERI_CLK_SETUP(ccu, BCM281XX_SLAVE_CCU_SSP0, ssp0);
-	PERI_CLK_SETUP(ccu, BCM281XX_SLAVE_CCU_SSP2, ssp2);
-	PERI_CLK_SETUP(ccu, BCM281XX_SLAVE_CCU_BSC1, bsc1);
-	PERI_CLK_SETUP(ccu, BCM281XX_SLAVE_CCU_BSC2, bsc2);
-	PERI_CLK_SETUP(ccu, BCM281XX_SLAVE_CCU_BSC3, bsc3);
-	PERI_CLK_SETUP(ccu, BCM281XX_SLAVE_CCU_PWM, pwm);
-
-	return 0;
-}
-
 /* Device tree match table callback functions */
 
 static void __init kona_dt_root_ccu_setup(struct device_node *node)
 {
-	kona_dt_ccu_setup(&root_ccu_data, node, bcm281xx_root_ccu_clks_setup);
+	kona_dt_ccu_setup(&root_ccu_data, node);
 }
 
 static void __init kona_dt_aon_ccu_setup(struct device_node *node)
 {
-	kona_dt_ccu_setup(&aon_ccu_data, node, bcm281xx_aon_ccu_clks_setup);
+	kona_dt_ccu_setup(&aon_ccu_data, node);
 }
 
 static void __init kona_dt_hub_ccu_setup(struct device_node *node)
 {
-	kona_dt_ccu_setup(&hub_ccu_data, node, bcm281xx_hub_ccu_clks_setup);
+	kona_dt_ccu_setup(&hub_ccu_data, node);
 }
 
 static void __init kona_dt_master_ccu_setup(struct device_node *node)
 {
-	kona_dt_ccu_setup(&master_ccu_data, node,
-			bcm281xx_master_ccu_clks_setup);
+	kona_dt_ccu_setup(&master_ccu_data, node);
 }
 
 static void __init kona_dt_slave_ccu_setup(struct device_node *node)
 {
-	kona_dt_ccu_setup(&slave_ccu_data, node,
-			bcm281xx_slave_ccu_clks_setup);
+	kona_dt_ccu_setup(&slave_ccu_data, node);
 }
 
 CLK_OF_DECLARE(bcm281xx_root_ccu, BCM281XX_DT_ROOT_CCU_COMPAT,
diff --git a/drivers/clk/bcm/clk-kona-setup.c b/drivers/clk/bcm/clk-kona-setup.c
index 4d1ca5372eff..825a2f2ab052 100644
--- a/drivers/clk/bcm/clk-kona-setup.c
+++ b/drivers/clk/bcm/clk-kona-setup.c
@@ -567,7 +567,6 @@ static void peri_clk_teardown(struct peri_clk_data *data,
 				struct clk_init_data *init_data)
 {
 	clk_sel_teardown(&data->sel, init_data);
-	init_data->ops = NULL;
 }
 
 /*
@@ -576,10 +575,9 @@ static void peri_clk_teardown(struct peri_clk_data *data,
  * that can be assigned if the clock has one or more parent clocks
  * associated with it.
  */
-static int peri_clk_setup(struct ccu_data *ccu, struct peri_clk_data *data,
-			struct clk_init_data *init_data)
+static int
+peri_clk_setup(struct peri_clk_data *data, struct clk_init_data *init_data)
 {
-	init_data->ops = &kona_peri_clk_ops;
 	init_data->flags = CLK_IGNORE_UNUSED;
 
 	return clk_sel_setup(data->clocks, &data->sel, init_data);
@@ -617,39 +615,26 @@ static void kona_clk_teardown(struct clk *clk)
 	bcm_clk_teardown(bcm_clk);
 }
 
-struct clk *kona_clk_setup(struct ccu_data *ccu, const char *name,
-			enum bcm_clk_type type, void *data)
+struct clk *kona_clk_setup(struct kona_clk *bcm_clk)
 {
-	struct kona_clk *bcm_clk;
-	struct clk_init_data *init_data;
+	struct clk_init_data *init_data = &bcm_clk->init_data;
 	struct clk *clk = NULL;
 
-	bcm_clk = kzalloc(sizeof(*bcm_clk), GFP_KERNEL);
-	if (!bcm_clk) {
-		pr_err("%s: failed to allocate bcm_clk for %s\n", __func__,
-			name);
-		return NULL;
-	}
-	bcm_clk->ccu = ccu;
-	bcm_clk->init_data.name = name;
-
-	init_data = &bcm_clk->init_data;
-	init_data->name = name;
-	switch (type) {
+	switch (bcm_clk->type) {
 	case bcm_clk_peri:
-		if (peri_clk_setup(ccu, data, init_data))
-			goto out_free;
+		if (peri_clk_setup(bcm_clk->u.data, init_data))
+			return NULL;
 		break;
 	default:
-		data = NULL;
-		break;
+		pr_err("%s: clock type %d invalid for %s\n", __func__,
+			(int)bcm_clk->type, init_data->name);
+		return NULL;
 	}
-	bcm_clk->type = type;
-	bcm_clk->u.data = data;
 
 	/* Make sure everything makes sense before we set it up */
 	if (!kona_clk_valid(bcm_clk)) {
-		pr_err("%s: clock data invalid for %s\n", __func__, name);
+		pr_err("%s: clock data invalid for %s\n", __func__,
+			init_data->name);
 		goto out_teardown;
 	}
 
@@ -657,7 +642,7 @@ struct clk *kona_clk_setup(struct ccu_data *ccu, const char *name,
 	clk = clk_register(NULL, &bcm_clk->hw);
 	if (IS_ERR(clk)) {
 		pr_err("%s: error registering clock %s (%ld)\n", __func__,
-				name, PTR_ERR(clk));
+			init_data->name, PTR_ERR(clk));
 		goto out_teardown;
 	}
 	BUG_ON(!clk);
@@ -665,8 +650,6 @@ struct clk *kona_clk_setup(struct ccu_data *ccu, const char *name,
 	return clk;
 out_teardown:
 	bcm_clk_teardown(bcm_clk);
-out_free:
-	kfree(bcm_clk);
 
 	return NULL;
 }
@@ -701,11 +684,11 @@ static void kona_ccu_teardown(struct ccu_data *ccu)
  * initialize the array of clocks provided by the CCU.
  */
 void __init kona_dt_ccu_setup(struct ccu_data *ccu,
-			struct device_node *node,
-			int (*ccu_clks_setup)(struct ccu_data *))
+			struct device_node *node)
 {
 	struct resource res = { 0 };
 	resource_size_t range;
+	unsigned int i;
 	int ret;
 
 	if (ccu->clk_data.clk_num) {
@@ -744,9 +727,16 @@ void __init kona_dt_ccu_setup(struct ccu_data *ccu,
 	ccu->node = of_node_get(node);
 	list_add_tail(&ccu->links, &ccu_list);
 
-	/* Set up clocks array (in ccu->clk_data) */
-	if (ccu_clks_setup(ccu))
-		goto out_err;
+	/*
+	 * Set up each defined kona clock and save the result in
+	 * the clock framework clock array (in ccu->data).  Then
+	 * register as a provider for these clocks.
+	 */
+	for (i = 0; i < ccu->clk_data.clk_num; i++) {
+		if (!ccu->kona_clks[i].ccu)
+			continue;
+		ccu->clk_data.clks[i] = kona_clk_setup(&ccu->kona_clks[i]);
+	}
 
 	ret = of_clk_add_provider(node, of_clk_src_onecell_get, &ccu->clk_data);
 	if (ret) {
diff --git a/drivers/clk/bcm/clk-kona.h b/drivers/clk/bcm/clk-kona.h
index 108c2647ca28..05d74779a564 100644
--- a/drivers/clk/bcm/clk-kona.h
+++ b/drivers/clk/bcm/clk-kona.h
@@ -70,35 +70,6 @@ enum bcm_clk_type {
 	bcm_clk_peri
 };
 
-/*
- * Each CCU defines a mapped area of memory containing registers
- * used to manage clocks implemented by the CCU.  Access to memory
- * within the CCU's space is serialized by a spinlock.  Before any
- * (other) address can be written, a special access "password" value
- * must be written to its WR_ACCESS register (located at the base
- * address of the range).  We keep track of the name of each CCU as
- * it is set up, and maintain them in a list.
- */
-struct ccu_data {
-	void __iomem *base;	/* base of mapped address space */
-	spinlock_t lock;	/* serialization lock */
-	bool write_enabled;	/* write access is currently enabled */
-	struct list_head links;	/* for ccu_list */
-	struct device_node *node;
-	struct clk_onecell_data clk_data;
-	const char *name;
-	u32 range;		/* byte range of address space */
-};
-
-/* Initialization for common fields in a Kona ccu_data structure */
-#define KONA_CCU_COMMON(_prefix, _name, _ucase_name)			    \
-	.name		= #_name "_ccu",				    \
-	.lock		= __SPIN_LOCK_UNLOCKED(_name ## _ccu_data.lock),    \
-	.links		= LIST_HEAD_INIT(_name ## _ccu_data.links),	    \
-	.clk_data	= {						    \
-		.clk_num = _prefix ## _ ## _ucase_name ## _CCU_CLOCK_COUNT, \
-	}
-
 /*
  * Gating control and status is managed by a 32-bit gate register.
  *
@@ -393,17 +364,52 @@ struct kona_clk {
 #define to_kona_clk(_hw) \
 	container_of(_hw, struct kona_clk, hw)
 
-/* Exported globals */
+/* Initialization macro for an entry in a CCU's kona_clks[] array. */
+#define KONA_CLK(_ccu_name, _clk_name, _type)				\
+	{								\
+		.init_data	= {					\
+			.name = #_clk_name,				\
+			.ops = &kona_ ## _type ## _clk_ops,		\
+		},							\
+		.ccu		= &_ccu_name ## _ccu_data,		\
+		.type		= bcm_clk_ ## _type,			\
+		.u.data		= &_clk_name ## _data,			\
+	}
+#define LAST_KONA_CLK	{ .type = bcm_clk_none }
 
-extern struct clk_ops kona_peri_clk_ops;
+/*
+ * Each CCU defines a mapped area of memory containing registers
+ * used to manage clocks implemented by the CCU.  Access to memory
+ * within the CCU's space is serialized by a spinlock.  Before any
+ * (other) address can be written, a special access "password" value
+ * must be written to its WR_ACCESS register (located at the base
+ * address of the range).  We keep track of the name of each CCU as
+ * it is set up, and maintain them in a list.
+ */
+struct ccu_data {
+	void __iomem *base;	/* base of mapped address space */
+	spinlock_t lock;	/* serialization lock */
+	bool write_enabled;	/* write access is currently enabled */
+	struct list_head links;	/* for ccu_list */
+	struct device_node *node;
+	struct clk_onecell_data clk_data;
+	const char *name;
+	u32 range;		/* byte range of address space */
+	struct kona_clk kona_clks[];	/* must be last */
+};
 
-/* Help functions */
+/* Initialization for common fields in a Kona ccu_data structure */
+#define KONA_CCU_COMMON(_prefix, _name, _ccuname)			    \
+	.name		= #_name "_ccu",				    \
+	.lock		= __SPIN_LOCK_UNLOCKED(_name ## _ccu_data.lock),    \
+	.links		= LIST_HEAD_INIT(_name ## _ccu_data.links),	    \
+	.clk_data	= {						    \
+		.clk_num = _prefix ## _ ## _ccuname ## _CCU_CLOCK_COUNT,    \
+	}
 
-#define KONA_CLK_SETUP(_ccu, _type, _name) \
-	kona_clk_setup((_ccu), #_name, bcm_clk_## _type, &_name ## _data)
+/* Exported globals */
 
-#define PERI_CLK_SETUP(_ccu, _id, _name) \
-	(_ccu)->clk_data.clks[_id] = KONA_CLK_SETUP((_ccu), peri, _name)
+extern struct clk_ops kona_peri_clk_ops;
 
 /* Externally visible functions */
 
@@ -412,11 +418,9 @@ extern u64 scaled_div_max(struct bcm_clk_div *div);
 extern u64 scaled_div_build(struct bcm_clk_div *div, u32 div_value,
 				u32 billionths);
 
-extern struct clk *kona_clk_setup(struct ccu_data *ccu, const char *name,
-			enum bcm_clk_type type, void *data);
+extern struct clk *kona_clk_setup(struct kona_clk *bcm_clk);
 extern void __init kona_dt_ccu_setup(struct ccu_data *ccu,
-			struct device_node *node,
-			int (*ccu_clks_setup)(struct ccu_data *));
+				struct device_node *node);
 extern bool __init kona_ccu_init(struct ccu_data *ccu);
 
 #endif /* _CLK_KONA_H */
-- 
cgit v1.2.3


From a597faccc7eedd406313e880ed05ff75bc522910 Mon Sep 17 00:00:00 2001
From: Alex Elder <elder@linaro.org>
Date: Mon, 21 Apr 2014 16:11:42 -0500
Subject: clk: bcm281xx: add clock policy support

Add support for CCU policy engine control, and also for setting the
mask bits for bus clocks that require a policy change to get
activated.  This includes adding validity checking framework for
CCUs, to validate the policy fields if defined.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/bcm/clk-kona-setup.c |  92 +++++++++++++++++++++++
 drivers/clk/bcm/clk-kona.c       | 155 +++++++++++++++++++++++++++++++++++++++
 drivers/clk/bcm/clk-kona.h       |  71 ++++++++++++++++++
 3 files changed, 318 insertions(+)

(limited to 'drivers')

diff --git a/drivers/clk/bcm/clk-kona-setup.c b/drivers/clk/bcm/clk-kona-setup.c
index 825a2f2ab052..773ad7c7dd59 100644
--- a/drivers/clk/bcm/clk-kona-setup.c
+++ b/drivers/clk/bcm/clk-kona-setup.c
@@ -25,6 +25,31 @@ LIST_HEAD(ccu_list);	/* The list of set up CCUs */
 
 /* Validity checking */
 
+static bool ccu_data_offsets_valid(struct ccu_data *ccu)
+{
+	struct ccu_policy *ccu_policy = &ccu->policy;
+	u32 limit;
+
+	limit = ccu->range - sizeof(u32);
+	limit = round_down(limit, sizeof(u32));
+	if (ccu_policy_exists(ccu_policy)) {
+		if (ccu_policy->enable.offset > limit) {
+			pr_err("%s: bad policy enable offset for %s "
+					"(%u > %u)\n", __func__,
+				ccu->name, ccu_policy->enable.offset, limit);
+			return false;
+		}
+		if (ccu_policy->control.offset > limit) {
+			pr_err("%s: bad policy control offset for %s "
+					"(%u > %u)\n", __func__,
+				ccu->name, ccu_policy->control.offset, limit);
+			return false;
+		}
+	}
+
+	return true;
+}
+
 static bool clk_requires_trigger(struct kona_clk *bcm_clk)
 {
 	struct peri_clk_data *peri = bcm_clk->u.peri;
@@ -54,6 +79,7 @@ static bool clk_requires_trigger(struct kona_clk *bcm_clk)
 static bool peri_clk_data_offsets_valid(struct kona_clk *bcm_clk)
 {
 	struct peri_clk_data *peri;
+	struct bcm_clk_policy *policy;
 	struct bcm_clk_gate *gate;
 	struct bcm_clk_div *div;
 	struct bcm_clk_sel *sel;
@@ -70,6 +96,15 @@ static bool peri_clk_data_offsets_valid(struct kona_clk *bcm_clk)
 	limit = range - sizeof(u32);
 	limit = round_down(limit, sizeof(u32));
 
+	policy = &peri->policy;
+	if (policy_exists(policy)) {
+		if (policy->offset > limit) {
+			pr_err("%s: bad policy offset for %s (%u > %u)\n",
+				__func__, name, policy->offset, limit);
+			return false;
+		}
+	}
+
 	gate = &peri->gate;
 	if (gate_exists(gate)) {
 		if (gate->offset > limit) {
@@ -167,6 +202,36 @@ static bool bitfield_valid(u32 shift, u32 width, const char *field_name,
 	return true;
 }
 
+static bool
+ccu_policy_valid(struct ccu_policy *ccu_policy, const char *ccu_name)
+{
+	struct bcm_lvm_en *enable = &ccu_policy->enable;
+	struct bcm_policy_ctl *control;
+
+	if (!bit_posn_valid(enable->bit, "policy enable", ccu_name))
+		return false;
+
+	control = &ccu_policy->control;
+	if (!bit_posn_valid(control->go_bit, "policy control GO", ccu_name))
+		return false;
+
+	if (!bit_posn_valid(control->atl_bit, "policy control ATL", ccu_name))
+		return false;
+
+	if (!bit_posn_valid(control->ac_bit, "policy control AC", ccu_name))
+		return false;
+
+	return true;
+}
+
+static bool policy_valid(struct bcm_clk_policy *policy, const char *clock_name)
+{
+	if (!bit_posn_valid(policy->bit, "policy", clock_name))
+		return false;
+
+	return true;
+}
+
 /*
  * All gates, if defined, have a status bit, and for hardware-only
  * gates, that's it.  Gates that can be software controlled also
@@ -312,6 +377,7 @@ static bool
 peri_clk_data_valid(struct kona_clk *bcm_clk)
 {
 	struct peri_clk_data *peri;
+	struct bcm_clk_policy *policy;
 	struct bcm_clk_gate *gate;
 	struct bcm_clk_sel *sel;
 	struct bcm_clk_div *div;
@@ -331,6 +397,11 @@ peri_clk_data_valid(struct kona_clk *bcm_clk)
 
 	peri = bcm_clk->u.peri;
 	name = bcm_clk->init_data.name;
+
+	policy = &peri->policy;
+	if (policy_exists(policy) && !policy_valid(policy, name))
+		return false;
+
 	gate = &peri->gate;
 	if (gate_exists(gate) && !gate_valid(gate, "gate", name))
 		return false;
@@ -679,6 +750,21 @@ static void kona_ccu_teardown(struct ccu_data *ccu)
 	ccu->base = NULL;
 }
 
+static bool ccu_data_valid(struct ccu_data *ccu)
+{
+	struct ccu_policy *ccu_policy;
+
+	if (!ccu_data_offsets_valid(ccu))
+		return false;
+
+	ccu_policy = &ccu->policy;
+	if (ccu_policy_exists(ccu_policy))
+		if (!ccu_policy_valid(ccu_policy, ccu->name))
+			return false;
+
+	return true;
+}
+
 /*
  * Set up a CCU.  Call the provided ccu_clks_setup callback to
  * initialize the array of clocks provided by the CCU.
@@ -718,6 +804,12 @@ void __init kona_dt_ccu_setup(struct ccu_data *ccu,
 	}
 
 	ccu->range = (u32)range;
+
+	if (!ccu_data_valid(ccu)) {
+		pr_err("%s: ccu data not valid for %s\n", __func__, node->name);
+		goto out_err;
+	}
+
 	ccu->base = ioremap(res.start, ccu->range);
 	if (!ccu->base) {
 		pr_err("%s: unable to map CCU registers for %s\n", __func__,
diff --git a/drivers/clk/bcm/clk-kona.c b/drivers/clk/bcm/clk-kona.c
index f8bc6bc0784f..7d90c34d1336 100644
--- a/drivers/clk/bcm/clk-kona.c
+++ b/drivers/clk/bcm/clk-kona.c
@@ -16,6 +16,14 @@
 
 #include <linux/delay.h>
 
+/*
+ * "Policies" affect the frequencies of bus clocks provided by a
+ * CCU.  (I believe these polices are named "Deep Sleep", "Economy",
+ * "Normal", and "Turbo".)  A lower policy number has lower power
+ * consumption, and policy 2 is the default.
+ */
+#define CCU_POLICY_COUNT	4
+
 #define CCU_ACCESS_PASSWORD      0xA5A500
 #define CLK_GATE_DELAY_LOOP      2000
 
@@ -213,6 +221,148 @@ __ccu_wait_bit(struct ccu_data *ccu, u32 reg_offset, u32 bit, bool want)
 	return false;
 }
 
+/* Policy operations */
+
+static bool __ccu_policy_engine_start(struct ccu_data *ccu, bool sync)
+{
+	struct bcm_policy_ctl *control = &ccu->policy.control;
+	u32 offset;
+	u32 go_bit;
+	u32 mask;
+	bool ret;
+
+	/* If we don't need to control policy for this CCU, we're done. */
+	if (!policy_ctl_exists(control))
+		return true;
+
+	offset = control->offset;
+	go_bit = control->go_bit;
+
+	/* Ensure we're not busy before we start */
+	ret = __ccu_wait_bit(ccu, offset, go_bit, false);
+	if (!ret) {
+		pr_err("%s: ccu %s policy engine wouldn't go idle\n",
+			__func__, ccu->name);
+		return false;
+	}
+
+	/*
+	 * If it's a synchronous request, we'll wait for the voltage
+	 * and frequency of the active load to stabilize before
+	 * returning.  To do this we select the active load by
+	 * setting the ATL bit.
+	 *
+	 * An asynchronous request instead ramps the voltage in the
+	 * background, and when that process stabilizes, the target
+	 * load is copied to the active load and the CCU frequency
+	 * is switched.  We do this by selecting the target load
+	 * (ATL bit clear) and setting the request auto-copy (AC bit
+	 * set).
+	 *
+	 * Note, we do NOT read-modify-write this register.
+	 */
+	mask = (u32)1 << go_bit;
+	if (sync)
+		mask |= 1 << control->atl_bit;
+	else
+		mask |= 1 << control->ac_bit;
+	__ccu_write(ccu, offset, mask);
+
+	/* Wait for indication that operation is complete. */
+	ret = __ccu_wait_bit(ccu, offset, go_bit, false);
+	if (!ret)
+		pr_err("%s: ccu %s policy engine never started\n",
+			__func__, ccu->name);
+
+	return ret;
+}
+
+static bool __ccu_policy_engine_stop(struct ccu_data *ccu)
+{
+	struct bcm_lvm_en *enable = &ccu->policy.enable;
+	u32 offset;
+	u32 enable_bit;
+	bool ret;
+
+	/* If we don't need to control policy for this CCU, we're done. */
+	if (!policy_lvm_en_exists(enable))
+		return true;
+
+	/* Ensure we're not busy before we start */
+	offset = enable->offset;
+	enable_bit = enable->bit;
+	ret = __ccu_wait_bit(ccu, offset, enable_bit, false);
+	if (!ret) {
+		pr_err("%s: ccu %s policy engine already stopped\n",
+			__func__, ccu->name);
+		return false;
+	}
+
+	/* Now set the bit to stop the engine (NO read-modify-write) */
+	__ccu_write(ccu, offset, (u32)1 << enable_bit);
+
+	/* Wait for indication that it has stopped. */
+	ret = __ccu_wait_bit(ccu, offset, enable_bit, false);
+	if (!ret)
+		pr_err("%s: ccu %s policy engine never stopped\n",
+			__func__, ccu->name);
+
+	return ret;
+}
+
+/*
+ * A CCU has four operating conditions ("policies"), and some clocks
+ * can be disabled or enabled based on which policy is currently in
+ * effect.  Such clocks have a bit in a "policy mask" register for
+ * each policy indicating whether the clock is enabled for that
+ * policy or not.  The bit position for a clock is the same for all
+ * four registers, and the 32-bit registers are at consecutive
+ * addresses.
+ */
+static bool policy_init(struct ccu_data *ccu, struct bcm_clk_policy *policy)
+{
+	u32 offset;
+	u32 mask;
+	int i;
+	bool ret;
+
+	if (!policy_exists(policy))
+		return true;
+
+	/*
+	 * We need to stop the CCU policy engine to allow update
+	 * of our policy bits.
+	 */
+	if (!__ccu_policy_engine_stop(ccu)) {
+		pr_err("%s: unable to stop CCU %s policy engine\n",
+			__func__, ccu->name);
+		return false;
+	}
+
+	/*
+	 * For now, if a clock defines its policy bit we just mark
+	 * it "enabled" for all four policies.
+	 */
+	offset = policy->offset;
+	mask = (u32)1 << policy->bit;
+	for (i = 0; i < CCU_POLICY_COUNT; i++) {
+		u32 reg_val;
+
+		reg_val = __ccu_read(ccu, offset);
+		reg_val |= mask;
+		__ccu_write(ccu, offset, reg_val);
+		offset += sizeof(u32);
+	}
+
+	/* We're done updating; fire up the policy engine again. */
+	ret = __ccu_policy_engine_start(ccu, true);
+	if (!ret)
+		pr_err("%s: unable to restart CCU %s policy engine\n",
+			__func__, ccu->name);
+
+	return ret;
+}
+
 /* Gate operations */
 
 /* Determine whether a clock is gated.  CCU lock must be held.  */
@@ -972,6 +1122,11 @@ static bool __peri_clk_init(struct kona_clk *bcm_clk)
 
 	BUG_ON(bcm_clk->type != bcm_clk_peri);
 
+	if (!policy_init(ccu, &peri->policy)) {
+		pr_err("%s: error initializing policy for %s\n",
+			__func__, name);
+		return false;
+	}
 	if (!gate_init(ccu, &peri->gate)) {
 		pr_err("%s: error initializing gate for %s\n", __func__, name);
 		return false;
diff --git a/drivers/clk/bcm/clk-kona.h b/drivers/clk/bcm/clk-kona.h
index 05d74779a564..4bcba1331561 100644
--- a/drivers/clk/bcm/clk-kona.h
+++ b/drivers/clk/bcm/clk-kona.h
@@ -43,8 +43,14 @@
 #define FLAG_FLIP(obj, type, flag)	((obj)->flags ^= FLAG(type, flag))
 #define FLAG_TEST(obj, type, flag)	(!!((obj)->flags & FLAG(type, flag)))
 
+/* CCU field state tests */
+
+#define ccu_policy_exists(ccu_policy)	((ccu_policy)->enable.offset != 0)
+
 /* Clock field state tests */
 
+#define policy_exists(policy)		((policy)->offset != 0)
+
 #define gate_exists(gate)		FLAG_TEST(gate, GATE, EXISTS)
 #define gate_is_enabled(gate)		FLAG_TEST(gate, GATE, ENABLED)
 #define gate_is_hw_controllable(gate)	FLAG_TEST(gate, GATE, HW)
@@ -62,6 +68,9 @@
 #define selector_exists(sel)		((sel)->width != 0)
 #define trigger_exists(trig)		FLAG_TEST(trig, TRIG, EXISTS)
 
+#define policy_lvm_en_exists(enable)	((enable)->offset != 0)
+#define policy_ctl_exists(control)	((control)->offset != 0)
+
 /* Clock type, used to tell common block what it's part of */
 enum bcm_clk_type {
 	bcm_clk_none,		/* undefined clock type */
@@ -70,6 +79,27 @@ enum bcm_clk_type {
 	bcm_clk_peri
 };
 
+/*
+ * CCU policy control for clocks.  Clocks can be enabled or disabled
+ * based on the CCU policy in effect.  One bit in each policy mask
+ * register (one per CCU policy) represents whether the clock is
+ * enabled when that policy is effect or not.  The CCU policy engine
+ * must be stopped to update these bits, and must be restarted again
+ * afterward.
+ */
+struct bcm_clk_policy {
+	u32 offset;		/* first policy mask register offset */
+	u32 bit;		/* bit used in all mask registers */
+};
+
+/* Policy initialization macro */
+
+#define POLICY(_offset, _bit)						\
+	{								\
+		.offset = (_offset),					\
+		.bit = (_bit),						\
+	}
+
 /*
  * Gating control and status is managed by a 32-bit gate register.
  *
@@ -340,6 +370,7 @@ struct bcm_clk_trig {
 	}
 
 struct peri_clk_data {
+	struct bcm_clk_policy policy;
 	struct bcm_clk_gate gate;
 	struct bcm_clk_trig pre_trig;
 	struct bcm_clk_div pre_div;
@@ -377,6 +408,45 @@ struct kona_clk {
 	}
 #define LAST_KONA_CLK	{ .type = bcm_clk_none }
 
+/*
+ * CCU policy control.  To enable software update of the policy
+ * tables the CCU policy engine must be stopped by setting the
+ * software update enable bit (LVM_EN).  After an update the engine
+ * is restarted using the GO bit and either the GO_ATL or GO_AC bit.
+ */
+struct bcm_lvm_en {
+	u32 offset;		/* LVM_EN register offset */
+	u32 bit;		/* POLICY_CONFIG_EN bit in register */
+};
+
+/* Policy enable initialization macro */
+#define CCU_LVM_EN(_offset, _bit)					\
+	{								\
+		.offset = (_offset),					\
+		.bit = (_bit),						\
+	}
+
+struct bcm_policy_ctl {
+	u32 offset;		/* POLICY_CTL register offset */
+	u32 go_bit;
+	u32 atl_bit;		/* GO, GO_ATL, and GO_AC bits */
+	u32 ac_bit;
+};
+
+/* Policy control initialization macro */
+#define CCU_POLICY_CTL(_offset, _go_bit, _ac_bit, _atl_bit)		\
+	{								\
+		.offset = (_offset),					\
+		.go_bit = (_go_bit),					\
+		.ac_bit = (_ac_bit),					\
+		.atl_bit = (_atl_bit),					\
+	}
+
+struct ccu_policy {
+	struct bcm_lvm_en enable;
+	struct bcm_policy_ctl control;
+};
+
 /*
  * Each CCU defines a mapped area of memory containing registers
  * used to manage clocks implemented by the CCU.  Access to memory
@@ -390,6 +460,7 @@ struct ccu_data {
 	void __iomem *base;	/* base of mapped address space */
 	spinlock_t lock;	/* serialization lock */
 	bool write_enabled;	/* write access is currently enabled */
+	struct ccu_policy policy;
 	struct list_head links;	/* for ccu_list */
 	struct device_node *node;
 	struct clk_onecell_data clk_data;
-- 
cgit v1.2.3


From dc613840a625bfad38141d2d8bbdb0c7bc3d45eb Mon Sep 17 00:00:00 2001
From: Alex Elder <elder@linaro.org>
Date: Mon, 21 Apr 2014 16:11:43 -0500
Subject: clk: bcm281xx: add clock hysteresis support

Add support for clock gate hysteresis control.  For now, if it's
defined for a clock, it's enabled.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/bcm/clk-kona-setup.c | 30 ++++++++++++++++++++++++++++++
 drivers/clk/bcm/clk-kona.c       | 33 +++++++++++++++++++++++++++++++++
 drivers/clk/bcm/clk-kona.h       | 19 +++++++++++++++++++
 3 files changed, 82 insertions(+)

(limited to 'drivers')

diff --git a/drivers/clk/bcm/clk-kona-setup.c b/drivers/clk/bcm/clk-kona-setup.c
index 773ad7c7dd59..e5aededdd322 100644
--- a/drivers/clk/bcm/clk-kona-setup.c
+++ b/drivers/clk/bcm/clk-kona-setup.c
@@ -81,6 +81,7 @@ static bool peri_clk_data_offsets_valid(struct kona_clk *bcm_clk)
 	struct peri_clk_data *peri;
 	struct bcm_clk_policy *policy;
 	struct bcm_clk_gate *gate;
+	struct bcm_clk_hyst *hyst;
 	struct bcm_clk_div *div;
 	struct bcm_clk_sel *sel;
 	struct bcm_clk_trig *trig;
@@ -106,12 +107,25 @@ static bool peri_clk_data_offsets_valid(struct kona_clk *bcm_clk)
 	}
 
 	gate = &peri->gate;
+	hyst = &peri->hyst;
 	if (gate_exists(gate)) {
 		if (gate->offset > limit) {
 			pr_err("%s: bad gate offset for %s (%u > %u)\n",
 				__func__, name, gate->offset, limit);
 			return false;
 		}
+
+		if (hyst_exists(hyst)) {
+			if (hyst->offset > limit) {
+				pr_err("%s: bad hysteresis offset for %s "
+					"(%u > %u)\n", __func__,
+					name, hyst->offset, limit);
+				return false;
+			}
+		}
+	} else if (hyst_exists(hyst)) {
+		pr_err("%s: hysteresis but no gate for %s\n", __func__, name);
+		return false;
 	}
 
 	div = &peri->div;
@@ -261,6 +275,17 @@ static bool gate_valid(struct bcm_clk_gate *gate, const char *field_name,
 	return true;
 }
 
+static bool hyst_valid(struct bcm_clk_hyst *hyst, const char *clock_name)
+{
+	if (!bit_posn_valid(hyst->en_bit, "hysteresis enable", clock_name))
+		return false;
+
+	if (!bit_posn_valid(hyst->val_bit, "hysteresis value", clock_name))
+		return false;
+
+	return true;
+}
+
 /*
  * A selector bitfield must be valid.  Its parent_sel array must
  * also be reasonable for the field.
@@ -379,6 +404,7 @@ peri_clk_data_valid(struct kona_clk *bcm_clk)
 	struct peri_clk_data *peri;
 	struct bcm_clk_policy *policy;
 	struct bcm_clk_gate *gate;
+	struct bcm_clk_hyst *hyst;
 	struct bcm_clk_sel *sel;
 	struct bcm_clk_div *div;
 	struct bcm_clk_div *pre_div;
@@ -406,6 +432,10 @@ peri_clk_data_valid(struct kona_clk *bcm_clk)
 	if (gate_exists(gate) && !gate_valid(gate, "gate", name))
 		return false;
 
+	hyst = &peri->hyst;
+	if (hyst_exists(hyst) && !hyst_valid(hyst, name))
+		return false;
+
 	sel = &peri->sel;
 	if (selector_exists(sel)) {
 		if (!sel_valid(sel, "selector", name))
diff --git a/drivers/clk/bcm/clk-kona.c b/drivers/clk/bcm/clk-kona.c
index 7d90c34d1336..d603c4e22fca 100644
--- a/drivers/clk/bcm/clk-kona.c
+++ b/drivers/clk/bcm/clk-kona.c
@@ -527,6 +527,35 @@ static int clk_gate(struct ccu_data *ccu, const char *name,
 	return -EIO;
 }
 
+/* Hysteresis operations */
+
+/*
+ * If a clock gate requires a turn-off delay it will have
+ * "hysteresis" register bits defined.  The first, if set, enables
+ * the delay; and if enabled, the second bit determines whether the
+ * delay is "low" or "high" (1 means high).  For now, if it's
+ * defined for a clock, we set it.
+ */
+static bool hyst_init(struct ccu_data *ccu, struct bcm_clk_hyst *hyst)
+{
+	u32 offset;
+	u32 reg_val;
+	u32 mask;
+
+	if (!hyst_exists(hyst))
+		return true;
+
+	offset = hyst->offset;
+	mask = (u32)1 << hyst->en_bit;
+	mask |= (u32)1 << hyst->val_bit;
+
+	reg_val = __ccu_read(ccu, offset);
+	reg_val |= mask;
+	__ccu_write(ccu, offset, reg_val);
+
+	return true;
+}
+
 /* Trigger operations */
 
 /*
@@ -1131,6 +1160,10 @@ static bool __peri_clk_init(struct kona_clk *bcm_clk)
 		pr_err("%s: error initializing gate for %s\n", __func__, name);
 		return false;
 	}
+	if (!hyst_init(ccu, &peri->hyst)) {
+		pr_err("%s: error initializing hyst for %s\n", __func__, name);
+		return false;
+	}
 	if (!div_init(ccu, &peri->gate, &peri->div, &peri->trig)) {
 		pr_err("%s: error initializing divider for %s\n", __func__,
 			name);
diff --git a/drivers/clk/bcm/clk-kona.h b/drivers/clk/bcm/clk-kona.h
index 4bcba1331561..2537b3072910 100644
--- a/drivers/clk/bcm/clk-kona.h
+++ b/drivers/clk/bcm/clk-kona.h
@@ -60,6 +60,8 @@
 
 #define gate_flip_enabled(gate)		FLAG_FLIP(gate, GATE, ENABLED)
 
+#define hyst_exists(hyst)		((hyst)->offset != 0)
+
 #define divider_exists(div)		FLAG_TEST(div, DIV, EXISTS)
 #define divider_is_fixed(div)		FLAG_TEST(div, DIV, FIXED)
 #define divider_has_fraction(div)	(!divider_is_fixed(div) && \
@@ -205,6 +207,22 @@ struct bcm_clk_gate {
 		.flags = FLAG(GATE, HW)|FLAG(GATE, EXISTS),		\
 	}
 
+/* Gate hysteresis for clocks */
+struct bcm_clk_hyst {
+	u32 offset;		/* hyst register offset (normally CLKGATE) */
+	u32 en_bit;		/* bit used to enable hysteresis */
+	u32 val_bit;		/* if enabled: 0 = low delay; 1 = high delay */
+};
+
+/* Hysteresis initialization macro */
+
+#define HYST(_offset, _en_bit, _val_bit)				\
+	{								\
+		.offset = (_offset),					\
+		.en_bit = (_en_bit),					\
+		.val_bit = (_val_bit),					\
+	}
+
 /*
  * Each clock can have zero, one, or two dividers which change the
  * output rate of the clock.  Each divider can be either fixed or
@@ -372,6 +390,7 @@ struct bcm_clk_trig {
 struct peri_clk_data {
 	struct bcm_clk_policy policy;
 	struct bcm_clk_gate gate;
+	struct bcm_clk_hyst hyst;
 	struct bcm_clk_trig pre_trig;
 	struct bcm_clk_div pre_div;
 	struct bcm_clk_trig trig;
-- 
cgit v1.2.3


From 0bdab78ba69f057c99e72b9887a997888e7fce15 Mon Sep 17 00:00:00 2001
From: Alex Elder <elder@linaro.org>
Date: Mon, 21 Apr 2014 16:26:23 -0500
Subject: clk: bcm281xx: move compatible string definitions

The Broadcom 281xx clock code uses a #define for the compatible
string for it's clock control units (CCUs).  Rather than defining
those in the C source file, define them in the header file that's
shared by both the code and the device tree source file (along with
all the clock ids).

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/bcm/clk-bcm281xx.c       | 12 ------------
 include/dt-bindings/clock/bcm281xx.h | 12 ++++++++++++
 2 files changed, 12 insertions(+), 12 deletions(-)

(limited to 'drivers')

diff --git a/drivers/clk/bcm/clk-bcm281xx.c b/drivers/clk/bcm/clk-bcm281xx.c
index 71a65a49f1a4..502a487d62c5 100644
--- a/drivers/clk/bcm/clk-bcm281xx.c
+++ b/drivers/clk/bcm/clk-bcm281xx.c
@@ -18,18 +18,6 @@
 #define BCM281XX_CCU_COMMON(_name, _ucase_name) \
 	KONA_CCU_COMMON(BCM281XX, _name, _ucase_name)
 
-/*
- * These are the bcm281xx CCU device tree "compatible" strings.
- * We're stuck with using "bcm11351" in the string because wild
- * cards aren't allowed, and that name was the first one defined
- * in this family of devices.
- */
-#define BCM281XX_DT_ROOT_CCU_COMPAT	"brcm,bcm11351-root-ccu"
-#define BCM281XX_DT_AON_CCU_COMPAT	"brcm,bcm11351-aon-ccu"
-#define BCM281XX_DT_HUB_CCU_COMPAT	"brcm,bcm11351-hub-ccu"
-#define BCM281XX_DT_MASTER_CCU_COMPAT	"brcm,bcm11351-master-ccu"
-#define BCM281XX_DT_SLAVE_CCU_COMPAT	"brcm,bcm11351-slave-ccu"
-
 /* Root CCU */
 
 static struct peri_clk_data frac_1m_data = {
diff --git a/include/dt-bindings/clock/bcm281xx.h b/include/dt-bindings/clock/bcm281xx.h
index e0096940886d..a763460cf1af 100644
--- a/include/dt-bindings/clock/bcm281xx.h
+++ b/include/dt-bindings/clock/bcm281xx.h
@@ -20,6 +20,18 @@
  * the clock control units (CCUs) on Broadcom BCM281XX family SoCs.
  */
 
+/*
+ * These are the bcm281xx CCU device tree "compatible" strings.
+ * We're stuck with using "bcm11351" in the string because wild
+ * cards aren't allowed, and that name was the first one defined
+ * in this family of devices.
+ */
+#define BCM281XX_DT_ROOT_CCU_COMPAT	"brcm,bcm11351-root-ccu"
+#define BCM281XX_DT_AON_CCU_COMPAT	"brcm,bcm11351-aon-ccu"
+#define BCM281XX_DT_HUB_CCU_COMPAT	"brcm,bcm11351-hub-ccu"
+#define BCM281XX_DT_MASTER_CCU_COMPAT	"brcm,bcm11351-master-ccu"
+#define BCM281XX_DT_SLAVE_CCU_COMPAT	"brcm,bcm11351-slave-ccu"
+
 /* root CCU clock ids */
 
 #define BCM281XX_ROOT_CCU_FRAC_1M		0
-- 
cgit v1.2.3


From 7d3723ba8c19a9d23a240f8e99010193e5623b06 Mon Sep 17 00:00:00 2001
From: Alex Elder <elder@linaro.org>
Date: Mon, 21 Apr 2014 16:26:26 -0500
Subject: clk: bcm21664: use common clock framework

Define the set of CCUs and provided clocks sufficient to satisfy the
needs of all the existing clock references for BCM21664.  Replace
the "fake" fixed-rate clocks used previously with "real" ones.

Note that only the minimal set of these clocks and CCUs is defined
here.  More clock definitions will need to be added as required by
the addition of additional drivers.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/bcm/Kconfig              |   2 +-
 drivers/clk/bcm/Makefile             |   1 +
 drivers/clk/bcm/clk-bcm21664.c       | 290 +++++++++++++++++++++++++++++++++++
 include/dt-bindings/clock/bcm21664.h |  62 ++++++++
 4 files changed, 354 insertions(+), 1 deletion(-)
 create mode 100644 drivers/clk/bcm/clk-bcm21664.c
 create mode 100644 include/dt-bindings/clock/bcm21664.h

(limited to 'drivers')

diff --git a/drivers/clk/bcm/Kconfig b/drivers/clk/bcm/Kconfig
index a7262fb8ce55..75506e53075b 100644
--- a/drivers/clk/bcm/Kconfig
+++ b/drivers/clk/bcm/Kconfig
@@ -6,4 +6,4 @@ config CLK_BCM_KONA
 	help
 	  Enable common clock framework support for Broadcom SoCs
 	  using "Kona" style clock control units, including those
-	  in the BCM281xx family.
+	  in the BCM281xx and BCM21664 families.
diff --git a/drivers/clk/bcm/Makefile b/drivers/clk/bcm/Makefile
index cf93359aa862..6297d05a9a10 100644
--- a/drivers/clk/bcm/Makefile
+++ b/drivers/clk/bcm/Makefile
@@ -1,3 +1,4 @@
 obj-$(CONFIG_CLK_BCM_KONA)	+= clk-kona.o
 obj-$(CONFIG_CLK_BCM_KONA)	+= clk-kona-setup.o
 obj-$(CONFIG_CLK_BCM_KONA)	+= clk-bcm281xx.o
+obj-$(CONFIG_CLK_BCM_KONA)	+= clk-bcm21664.o
diff --git a/drivers/clk/bcm/clk-bcm21664.c b/drivers/clk/bcm/clk-bcm21664.c
new file mode 100644
index 000000000000..eeae4cad2281
--- /dev/null
+++ b/drivers/clk/bcm/clk-bcm21664.c
@@ -0,0 +1,290 @@
+/*
+ * Copyright (C) 2014 Broadcom Corporation
+ * Copyright 2014 Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "clk-kona.h"
+#include "dt-bindings/clock/bcm21664.h"
+
+#define BCM21664_CCU_COMMON(_name, _capname) \
+	KONA_CCU_COMMON(BCM21664, _name, _capname)
+
+/* Root CCU */
+
+static struct peri_clk_data frac_1m_data = {
+	.gate		= HW_SW_GATE(0x214, 16, 0, 1),
+	.clocks		= CLOCKS("ref_crystal"),
+};
+
+static struct ccu_data root_ccu_data = {
+	BCM21664_CCU_COMMON(root, ROOT),
+	/* no policy control */
+	.kona_clks	= {
+		[BCM21664_ROOT_CCU_FRAC_1M] =
+			KONA_CLK(root, frac_1m, peri),
+		[BCM21664_ROOT_CCU_CLOCK_COUNT] = LAST_KONA_CLK,
+	},
+};
+
+/* AON CCU */
+
+static struct peri_clk_data hub_timer_data = {
+	.gate		= HW_SW_GATE(0x0414, 16, 0, 1),
+	.hyst		= HYST(0x0414, 8, 9),
+	.clocks		= CLOCKS("bbl_32k",
+				 "frac_1m",
+				 "dft_19_5m"),
+	.sel		= SELECTOR(0x0a10, 0, 2),
+	.trig		= TRIGGER(0x0a40, 4),
+};
+
+static struct ccu_data aon_ccu_data = {
+	BCM21664_CCU_COMMON(aon, AON),
+	.policy		= {
+		.enable		= CCU_LVM_EN(0x0034, 0),
+		.control	= CCU_POLICY_CTL(0x000c, 0, 1, 2),
+	},
+	.kona_clks	= {
+		[BCM21664_AON_CCU_HUB_TIMER] =
+			KONA_CLK(aon, hub_timer, peri),
+		[BCM21664_AON_CCU_CLOCK_COUNT] = LAST_KONA_CLK,
+	},
+};
+
+/* Master CCU */
+
+static struct peri_clk_data sdio1_data = {
+	.gate		= HW_SW_GATE(0x0358, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_52m",
+				 "ref_52m",
+				 "var_96m",
+				 "ref_96m"),
+	.sel		= SELECTOR(0x0a28, 0, 3),
+	.div		= DIVIDER(0x0a28, 4, 14),
+	.trig		= TRIGGER(0x0afc, 9),
+};
+
+static struct peri_clk_data sdio2_data = {
+	.gate		= HW_SW_GATE(0x035c, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_52m",
+				 "ref_52m",
+				 "var_96m",
+				 "ref_96m"),
+	.sel		= SELECTOR(0x0a2c, 0, 3),
+	.div		= DIVIDER(0x0a2c, 4, 14),
+	.trig		= TRIGGER(0x0afc, 10),
+};
+
+static struct peri_clk_data sdio3_data = {
+	.gate		= HW_SW_GATE(0x0364, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_52m",
+				 "ref_52m",
+				 "var_96m",
+				 "ref_96m"),
+	.sel		= SELECTOR(0x0a34, 0, 3),
+	.div		= DIVIDER(0x0a34, 4, 14),
+	.trig		= TRIGGER(0x0afc, 12),
+};
+
+static struct peri_clk_data sdio4_data = {
+	.gate		= HW_SW_GATE(0x0360, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_52m",
+				 "ref_52m",
+				 "var_96m",
+				 "ref_96m"),
+	.sel		= SELECTOR(0x0a30, 0, 3),
+	.div		= DIVIDER(0x0a30, 4, 14),
+	.trig		= TRIGGER(0x0afc, 11),
+};
+
+static struct peri_clk_data sdio1_sleep_data = {
+	.clocks		= CLOCKS("ref_32k"),	/* Verify */
+	.gate		= HW_SW_GATE(0x0358, 18, 2, 3),
+};
+
+static struct peri_clk_data sdio2_sleep_data = {
+	.clocks		= CLOCKS("ref_32k"),	/* Verify */
+	.gate		= HW_SW_GATE(0x035c, 18, 2, 3),
+};
+
+static struct peri_clk_data sdio3_sleep_data = {
+	.clocks		= CLOCKS("ref_32k"),	/* Verify */
+	.gate		= HW_SW_GATE(0x0364, 18, 2, 3),
+};
+
+static struct peri_clk_data sdio4_sleep_data = {
+	.clocks		= CLOCKS("ref_32k"),	/* Verify */
+	.gate		= HW_SW_GATE(0x0360, 18, 2, 3),
+};
+
+static struct ccu_data master_ccu_data = {
+	BCM21664_CCU_COMMON(master, MASTER),
+	.policy		= {
+		.enable		= CCU_LVM_EN(0x0034, 0),
+		.control	= CCU_POLICY_CTL(0x000c, 0, 1, 2),
+	},
+	.kona_clks	= {
+		[BCM21664_MASTER_CCU_SDIO1] =
+			KONA_CLK(master, sdio1, peri),
+		[BCM21664_MASTER_CCU_SDIO2] =
+			KONA_CLK(master, sdio2, peri),
+		[BCM21664_MASTER_CCU_SDIO3] =
+			KONA_CLK(master, sdio3, peri),
+		[BCM21664_MASTER_CCU_SDIO4] =
+			KONA_CLK(master, sdio4, peri),
+		[BCM21664_MASTER_CCU_SDIO1_SLEEP] =
+			KONA_CLK(master, sdio1_sleep, peri),
+		[BCM21664_MASTER_CCU_SDIO2_SLEEP] =
+			KONA_CLK(master, sdio2_sleep, peri),
+		[BCM21664_MASTER_CCU_SDIO3_SLEEP] =
+			KONA_CLK(master, sdio3_sleep, peri),
+		[BCM21664_MASTER_CCU_SDIO4_SLEEP] =
+			KONA_CLK(master, sdio4_sleep, peri),
+		[BCM21664_MASTER_CCU_CLOCK_COUNT] = LAST_KONA_CLK,
+	},
+};
+
+/* Slave CCU */
+
+static struct peri_clk_data uartb_data = {
+	.gate		= HW_SW_GATE(0x0400, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_156m",
+				 "ref_156m"),
+	.sel		= SELECTOR(0x0a10, 0, 2),
+	.div		= FRAC_DIVIDER(0x0a10, 4, 12, 8),
+	.trig		= TRIGGER(0x0afc, 2),
+};
+
+static struct peri_clk_data uartb2_data = {
+	.gate		= HW_SW_GATE(0x0404, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_156m",
+				 "ref_156m"),
+	.sel		= SELECTOR(0x0a14, 0, 2),
+	.div		= FRAC_DIVIDER(0x0a14, 4, 12, 8),
+	.trig		= TRIGGER(0x0afc, 3),
+};
+
+static struct peri_clk_data uartb3_data = {
+	.gate		= HW_SW_GATE(0x0408, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_156m",
+				 "ref_156m"),
+	.sel		= SELECTOR(0x0a18, 0, 2),
+	.div		= FRAC_DIVIDER(0x0a18, 4, 12, 8),
+	.trig		= TRIGGER(0x0afc, 4),
+};
+
+static struct peri_clk_data bsc1_data = {
+	.gate		= HW_SW_GATE(0x0458, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_104m",
+				 "ref_104m",
+				 "var_13m",
+				 "ref_13m"),
+	.sel		= SELECTOR(0x0a64, 0, 3),
+	.trig		= TRIGGER(0x0afc, 23),
+};
+
+static struct peri_clk_data bsc2_data = {
+	.gate		= HW_SW_GATE(0x045c, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_104m",
+				 "ref_104m",
+				 "var_13m",
+				 "ref_13m"),
+	.sel		= SELECTOR(0x0a68, 0, 3),
+	.trig		= TRIGGER(0x0afc, 24),
+};
+
+static struct peri_clk_data bsc3_data = {
+	.gate		= HW_SW_GATE(0x0470, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_104m",
+				 "ref_104m",
+				 "var_13m",
+				 "ref_13m"),
+	.sel		= SELECTOR(0x0a7c, 0, 3),
+	.trig		= TRIGGER(0x0afc, 18),
+};
+
+static struct peri_clk_data bsc4_data = {
+	.gate		= HW_SW_GATE(0x0474, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_104m",
+				 "ref_104m",
+				 "var_13m",
+				 "ref_13m"),
+	.sel		= SELECTOR(0x0a80, 0, 3),
+	.trig		= TRIGGER(0x0afc, 19),
+};
+
+static struct ccu_data slave_ccu_data = {
+	BCM21664_CCU_COMMON(slave, SLAVE),
+       .policy		= {
+		.enable		= CCU_LVM_EN(0x0034, 0),
+		.control	= CCU_POLICY_CTL(0x000c, 0, 1, 2),
+	},
+	.kona_clks	= {
+		[BCM21664_SLAVE_CCU_UARTB] =
+			KONA_CLK(slave, uartb, peri),
+		[BCM21664_SLAVE_CCU_UARTB2] =
+			KONA_CLK(slave, uartb2, peri),
+		[BCM21664_SLAVE_CCU_UARTB3] =
+			KONA_CLK(slave, uartb3, peri),
+		[BCM21664_SLAVE_CCU_BSC1] =
+			KONA_CLK(slave, bsc1, peri),
+		[BCM21664_SLAVE_CCU_BSC2] =
+			KONA_CLK(slave, bsc2, peri),
+		[BCM21664_SLAVE_CCU_BSC3] =
+			KONA_CLK(slave, bsc3, peri),
+		[BCM21664_SLAVE_CCU_BSC4] =
+			KONA_CLK(slave, bsc4, peri),
+		[BCM21664_SLAVE_CCU_CLOCK_COUNT] = LAST_KONA_CLK,
+	},
+};
+
+/* Device tree match table callback functions */
+
+static void __init kona_dt_root_ccu_setup(struct device_node *node)
+{
+	kona_dt_ccu_setup(&root_ccu_data, node);
+}
+
+static void __init kona_dt_aon_ccu_setup(struct device_node *node)
+{
+	kona_dt_ccu_setup(&aon_ccu_data, node);
+}
+
+static void __init kona_dt_master_ccu_setup(struct device_node *node)
+{
+	kona_dt_ccu_setup(&master_ccu_data, node);
+}
+
+static void __init kona_dt_slave_ccu_setup(struct device_node *node)
+{
+	kona_dt_ccu_setup(&slave_ccu_data, node);
+}
+
+CLK_OF_DECLARE(bcm21664_root_ccu, BCM21664_DT_ROOT_CCU_COMPAT,
+			kona_dt_root_ccu_setup);
+CLK_OF_DECLARE(bcm21664_aon_ccu, BCM21664_DT_AON_CCU_COMPAT,
+			kona_dt_aon_ccu_setup);
+CLK_OF_DECLARE(bcm21664_master_ccu, BCM21664_DT_MASTER_CCU_COMPAT,
+			kona_dt_master_ccu_setup);
+CLK_OF_DECLARE(bcm21664_slave_ccu, BCM21664_DT_SLAVE_CCU_COMPAT,
+			kona_dt_slave_ccu_setup);
diff --git a/include/dt-bindings/clock/bcm21664.h b/include/dt-bindings/clock/bcm21664.h
new file mode 100644
index 000000000000..5a7f0e4750a8
--- /dev/null
+++ b/include/dt-bindings/clock/bcm21664.h
@@ -0,0 +1,62 @@
+/*
+ * Copyright (C) 2013 Broadcom Corporation
+ * Copyright 2013 Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CLOCK_BCM21664_H
+#define _CLOCK_BCM21664_H
+
+/*
+ * This file defines the values used to specify clocks provided by
+ * the clock control units (CCUs) on Broadcom BCM21664 family SoCs.
+ */
+
+/* bcm21664 CCU device tree "compatible" strings */
+#define BCM21664_DT_ROOT_CCU_COMPAT	"brcm,bcm21664-root-ccu"
+#define BCM21664_DT_AON_CCU_COMPAT	"brcm,bcm21664-aon-ccu"
+#define BCM21664_DT_MASTER_CCU_COMPAT	"brcm,bcm21664-master-ccu"
+#define BCM21664_DT_SLAVE_CCU_COMPAT	"brcm,bcm21664-slave-ccu"
+
+/* root CCU clock ids */
+
+#define BCM21664_ROOT_CCU_FRAC_1M		0
+#define BCM21664_ROOT_CCU_CLOCK_COUNT		1
+
+/* aon CCU clock ids */
+
+#define BCM21664_AON_CCU_HUB_TIMER		0
+#define BCM21664_AON_CCU_CLOCK_COUNT		1
+
+/* master CCU clock ids */
+
+#define BCM21664_MASTER_CCU_SDIO1		0
+#define BCM21664_MASTER_CCU_SDIO2		1
+#define BCM21664_MASTER_CCU_SDIO3		2
+#define BCM21664_MASTER_CCU_SDIO4		3
+#define BCM21664_MASTER_CCU_SDIO1_SLEEP		4
+#define BCM21664_MASTER_CCU_SDIO2_SLEEP		5
+#define BCM21664_MASTER_CCU_SDIO3_SLEEP		6
+#define BCM21664_MASTER_CCU_SDIO4_SLEEP		7
+#define BCM21664_MASTER_CCU_CLOCK_COUNT		8
+
+/* slave CCU clock ids */
+
+#define BCM21664_SLAVE_CCU_UARTB		0
+#define BCM21664_SLAVE_CCU_UARTB2		1
+#define BCM21664_SLAVE_CCU_UARTB3		2
+#define BCM21664_SLAVE_CCU_BSC1			3
+#define BCM21664_SLAVE_CCU_BSC2			4
+#define BCM21664_SLAVE_CCU_BSC3			5
+#define BCM21664_SLAVE_CCU_BSC4			6
+#define BCM21664_SLAVE_CCU_CLOCK_COUNT		7
+
+#endif /* _CLOCK_BCM21664_H */
-- 
cgit v1.2.3


From 86a612349fa58467cd63b30748114ec377d61807 Mon Sep 17 00:00:00 2001
From: Stephen Boyd <sboyd@codeaurora.org>
Date: Wed, 26 Mar 2014 16:06:35 -0700
Subject: clk: Don't check for missing ops in clk_set_parent()

We dereference clk->ops during clock registration so this check
for NULL ops can't possibly ever be true.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/clk.c | 3 ---
 1 file changed, 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 7cf2c093cc54..453cf3d210d2 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -1716,9 +1716,6 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
 	if (!clk)
 		return 0;
 
-	if (!clk->ops)
-		return -EINVAL;
-
 	/* verify ops for for multi-parent clks */
 	if ((clk->num_parents > 1) && (!clk->ops->set_parent))
 		return -ENOSYS;
-- 
cgit v1.2.3


From 8f2c2db132cf5f4ffb4b9702ddb7e6bc5a343814 Mon Sep 17 00:00:00 2001
From: Stephen Boyd <sboyd@codeaurora.org>
Date: Wed, 26 Mar 2014 16:06:36 -0700
Subject: clk: Consolidate recalc rate logic

The same if-else statement exists four times to recalculate the
rate of a clock. Consolidate this logic into a single function to
save some lines.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/clk.c | 27 +++++++++++----------------
 1 file changed, 11 insertions(+), 16 deletions(-)

(limited to 'drivers')

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 453cf3d210d2..3c02be74fd7c 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -1115,6 +1115,13 @@ long clk_get_accuracy(struct clk *clk)
 }
 EXPORT_SYMBOL_GPL(clk_get_accuracy);
 
+static unsigned long clk_recalc(struct clk *clk, unsigned long parent_rate)
+{
+	if (clk->ops->recalc_rate)
+		return clk->ops->recalc_rate(clk->hw, parent_rate);
+	return parent_rate;
+}
+
 /**
  * __clk_recalc_rates
  * @clk: first clk in the subtree
@@ -1140,10 +1147,7 @@ static void __clk_recalc_rates(struct clk *clk, unsigned long msg)
 	if (clk->parent)
 		parent_rate = clk->parent->rate;
 
-	if (clk->ops->recalc_rate)
-		clk->rate = clk->ops->recalc_rate(clk->hw, parent_rate);
-	else
-		clk->rate = parent_rate;
+	clk->rate = clk_recalc(clk, parent_rate);
 
 	/*
 	 * ignore NOTIFY_STOP and NOTIFY_BAD return values for POST_RATE_CHANGE
@@ -1334,10 +1338,7 @@ static int __clk_speculate_rates(struct clk *clk, unsigned long parent_rate)
 	unsigned long new_rate;
 	int ret = NOTIFY_DONE;
 
-	if (clk->ops->recalc_rate)
-		new_rate = clk->ops->recalc_rate(clk->hw, parent_rate);
-	else
-		new_rate = parent_rate;
+	new_rate = clk_recalc(clk, parent_rate);
 
 	/* abort rate change if a driver returns NOTIFY_BAD or NOTIFY_STOP */
 	if (clk->notifier_count)
@@ -1373,10 +1374,7 @@ static void clk_calc_subtree(struct clk *clk, unsigned long new_rate,
 		new_parent->new_child = clk;
 
 	hlist_for_each_entry(child, &clk->children, child_node) {
-		if (child->ops->recalc_rate)
-			child->new_rate = child->ops->recalc_rate(child->hw, new_rate);
-		else
-			child->new_rate = new_rate;
+		child->new_rate = clk_recalc(child, new_rate);
 		clk_calc_subtree(child, child->new_rate, NULL, 0);
 	}
 }
@@ -1524,10 +1522,7 @@ static void clk_change_rate(struct clk *clk)
 	if (!skip_set_rate && clk->ops->set_rate)
 		clk->ops->set_rate(clk->hw, clk->new_rate, best_parent_rate);
 
-	if (clk->ops->recalc_rate)
-		clk->rate = clk->ops->recalc_rate(clk->hw, best_parent_rate);
-	else
-		clk->rate = best_parent_rate;
+	clk->rate = clk_recalc(clk, best_parent_rate);
 
 	if (clk->notifier_count && old_rate != clk->rate)
 		__clk_notify(clk, POST_RATE_CHANGE, old_rate, clk->rate);
-- 
cgit v1.2.3


From 63589e92c2d975cc63222e5bd4a9a1fa2a1187ac Mon Sep 17 00:00:00 2001
From: Stephen Boyd <sboyd@codeaurora.org>
Date: Wed, 26 Mar 2014 16:06:37 -0700
Subject: clk: Ignore error and NULL pointers passed to clk_{unprepare,
 disable}()

This simplifies error paths in drivers that use optional clocks
by allowing the NULL or error pointer to be passed
unconditionally.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/clk.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

(limited to 'drivers')

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 3c02be74fd7c..4d562206d62f 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -822,6 +822,9 @@ void __clk_unprepare(struct clk *clk)
  */
 void clk_unprepare(struct clk *clk)
 {
+	if (IS_ERR_OR_NULL(clk))
+		return;
+
 	clk_prepare_lock();
 	__clk_unprepare(clk);
 	clk_prepare_unlock();
@@ -883,9 +886,6 @@ static void __clk_disable(struct clk *clk)
 	if (!clk)
 		return;
 
-	if (WARN_ON(IS_ERR(clk)))
-		return;
-
 	if (WARN_ON(clk->enable_count == 0))
 		return;
 
@@ -914,6 +914,9 @@ void clk_disable(struct clk *clk)
 {
 	unsigned long flags;
 
+	if (IS_ERR_OR_NULL(clk))
+		return;
+
 	flags = clk_enable_lock();
 	__clk_disable(clk);
 	clk_enable_unlock(flags);
-- 
cgit v1.2.3


From 49fc825f0cc221768c5711b8ec6a71bd49f2663e Mon Sep 17 00:00:00 2001
From: Stephen Boyd <sboyd@codeaurora.org>
Date: Fri, 21 Mar 2014 17:59:37 -0700
Subject: clk: qcom: Consolidate common probe code

Most of the probe code is the same between all the different
clock controllers. Consolidate the code into a common.c file.
This makes changes to the common probe parts easier and reduces
chances for bugs.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/qcom/Makefile       |  1 +
 drivers/clk/qcom/common.c       | 99 +++++++++++++++++++++++++++++++++++++++++
 drivers/clk/qcom/common.h       | 34 ++++++++++++++
 drivers/clk/qcom/gcc-msm8660.c  | 87 +++++-------------------------------
 drivers/clk/qcom/gcc-msm8960.c  | 77 +++++---------------------------
 drivers/clk/qcom/gcc-msm8974.c  | 77 +++++---------------------------
 drivers/clk/qcom/mmcc-msm8960.c | 78 +++++---------------------------
 drivers/clk/qcom/mmcc-msm8974.c | 80 +++++++--------------------------
 8 files changed, 196 insertions(+), 337 deletions(-)
 create mode 100644 drivers/clk/qcom/common.c
 create mode 100644 drivers/clk/qcom/common.h

(limited to 'drivers')

diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index f60db2ef1aee..689e05bf4f95 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -1,5 +1,6 @@
 obj-$(CONFIG_COMMON_CLK_QCOM) += clk-qcom.o
 
+clk-qcom-y += common.o
 clk-qcom-y += clk-regmap.o
 clk-qcom-y += clk-pll.o
 clk-qcom-y += clk-rcg.o
diff --git a/drivers/clk/qcom/common.c b/drivers/clk/qcom/common.c
new file mode 100644
index 000000000000..86b45fba5f90
--- /dev/null
+++ b/drivers/clk/qcom/common.c
@@ -0,0 +1,99 @@
+/*
+ * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/export.h>
+#include <linux/regmap.h>
+#include <linux/platform_device.h>
+#include <linux/clk-provider.h>
+#include <linux/reset-controller.h>
+
+#include "common.h"
+#include "clk-regmap.h"
+#include "reset.h"
+
+struct qcom_cc {
+	struct qcom_reset_controller reset;
+	struct clk_onecell_data data;
+	struct clk *clks[];
+};
+
+int qcom_cc_probe(struct platform_device *pdev, const struct qcom_cc_desc *desc)
+{
+	void __iomem *base;
+	struct resource *res;
+	int i, ret;
+	struct device *dev = &pdev->dev;
+	struct clk *clk;
+	struct clk_onecell_data *data;
+	struct clk **clks;
+	struct regmap *regmap;
+	struct qcom_reset_controller *reset;
+	struct qcom_cc *cc;
+	size_t num_clks = desc->num_clks;
+	struct clk_regmap **rclks = desc->clks;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	regmap = devm_regmap_init_mmio(dev, base, desc->config);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	cc = devm_kzalloc(dev, sizeof(*cc) + sizeof(*clks) * num_clks,
+			  GFP_KERNEL);
+	if (!cc)
+		return -ENOMEM;
+
+	clks = cc->clks;
+	data = &cc->data;
+	data->clks = clks;
+	data->clk_num = num_clks;
+
+	for (i = 0; i < num_clks; i++) {
+		if (!rclks[i])
+			continue;
+		clk = devm_clk_register_regmap(dev, rclks[i]);
+		if (IS_ERR(clk))
+			return PTR_ERR(clk);
+		clks[i] = clk;
+	}
+
+	ret = of_clk_add_provider(dev->of_node, of_clk_src_onecell_get, data);
+	if (ret)
+		return ret;
+
+	reset = &cc->reset;
+	reset->rcdev.of_node = dev->of_node;
+	reset->rcdev.ops = &qcom_reset_ops;
+	reset->rcdev.owner = dev->driver->owner;
+	reset->rcdev.nr_resets = desc->num_resets;
+	reset->regmap = regmap;
+	reset->reset_map = desc->resets;
+	platform_set_drvdata(pdev, &reset->rcdev);
+
+	ret = reset_controller_register(&reset->rcdev);
+	if (ret)
+		of_clk_del_provider(dev->of_node);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(qcom_cc_probe);
+
+void qcom_cc_remove(struct platform_device *pdev)
+{
+	of_clk_del_provider(pdev->dev.of_node);
+	reset_controller_unregister(platform_get_drvdata(pdev));
+}
+EXPORT_SYMBOL_GPL(qcom_cc_remove);
diff --git a/drivers/clk/qcom/common.h b/drivers/clk/qcom/common.h
new file mode 100644
index 000000000000..2c3cfc860348
--- /dev/null
+++ b/drivers/clk/qcom/common.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef __QCOM_CLK_COMMON_H__
+#define __QCOM_CLK_COMMON_H__
+
+struct platform_device;
+struct regmap_config;
+struct clk_regmap;
+struct qcom_reset_map;
+
+struct qcom_cc_desc {
+	const struct regmap_config *config;
+	struct clk_regmap **clks;
+	size_t num_clks;
+	const struct qcom_reset_map *resets;
+	size_t num_resets;
+};
+
+extern int qcom_cc_probe(struct platform_device *pdev,
+			 const struct qcom_cc_desc *desc);
+
+extern void qcom_cc_remove(struct platform_device *pdev);
+
+#endif
diff --git a/drivers/clk/qcom/gcc-msm8660.c b/drivers/clk/qcom/gcc-msm8660.c
index bc0b7f1fcfbe..44bc6fa64d78 100644
--- a/drivers/clk/qcom/gcc-msm8660.c
+++ b/drivers/clk/qcom/gcc-msm8660.c
@@ -25,6 +25,7 @@
 #include <dt-bindings/clock/qcom,gcc-msm8660.h>
 #include <dt-bindings/reset/qcom,gcc-msm8660.h>
 
+#include "common.h"
 #include "clk-regmap.h"
 #include "clk-pll.h"
 #include "clk-rcg.h"
@@ -2701,94 +2702,28 @@ static const struct regmap_config gcc_msm8660_regmap_config = {
 	.fast_io	= true,
 };
 
+static const struct qcom_cc_desc gcc_msm8660_desc = {
+	.config = &gcc_msm8660_regmap_config,
+	.clks = gcc_msm8660_clks,
+	.num_clks = ARRAY_SIZE(gcc_msm8660_clks),
+	.resets = gcc_msm8660_resets,
+	.num_resets = ARRAY_SIZE(gcc_msm8660_resets),
+};
+
 static const struct of_device_id gcc_msm8660_match_table[] = {
 	{ .compatible = "qcom,gcc-msm8660" },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, gcc_msm8660_match_table);
 
-struct qcom_cc {
-	struct qcom_reset_controller reset;
-	struct clk_onecell_data data;
-	struct clk *clks[];
-};
-
 static int gcc_msm8660_probe(struct platform_device *pdev)
 {
-	void __iomem *base;
-	struct resource *res;
-	int i, ret;
-	struct device *dev = &pdev->dev;
-	struct clk *clk;
-	struct clk_onecell_data *data;
-	struct clk **clks;
-	struct regmap *regmap;
-	size_t num_clks;
-	struct qcom_reset_controller *reset;
-	struct qcom_cc *cc;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	base = devm_ioremap_resource(dev, res);
-	if (IS_ERR(base))
-		return PTR_ERR(base);
-
-	regmap = devm_regmap_init_mmio(dev, base, &gcc_msm8660_regmap_config);
-	if (IS_ERR(regmap))
-		return PTR_ERR(regmap);
-
-	num_clks = ARRAY_SIZE(gcc_msm8660_clks);
-	cc = devm_kzalloc(dev, sizeof(*cc) + sizeof(*clks) * num_clks,
-			  GFP_KERNEL);
-	if (!cc)
-		return -ENOMEM;
-
-	clks = cc->clks;
-	data = &cc->data;
-	data->clks = clks;
-	data->clk_num = num_clks;
-
-	/* Temporary until RPM clocks supported */
-	clk = clk_register_fixed_rate(dev, "cxo", NULL, CLK_IS_ROOT, 19200000);
-	if (IS_ERR(clk))
-		return PTR_ERR(clk);
-
-	clk = clk_register_fixed_rate(dev, "pxo", NULL, CLK_IS_ROOT, 27000000);
-	if (IS_ERR(clk))
-		return PTR_ERR(clk);
-
-	for (i = 0; i < num_clks; i++) {
-		if (!gcc_msm8660_clks[i])
-			continue;
-		clk = devm_clk_register_regmap(dev, gcc_msm8660_clks[i]);
-		if (IS_ERR(clk))
-			return PTR_ERR(clk);
-		clks[i] = clk;
-	}
-
-	ret = of_clk_add_provider(dev->of_node, of_clk_src_onecell_get, data);
-	if (ret)
-		return ret;
-
-	reset = &cc->reset;
-	reset->rcdev.of_node = dev->of_node;
-	reset->rcdev.ops = &qcom_reset_ops,
-	reset->rcdev.owner = THIS_MODULE,
-	reset->rcdev.nr_resets = ARRAY_SIZE(gcc_msm8660_resets),
-	reset->regmap = regmap;
-	reset->reset_map = gcc_msm8660_resets,
-	platform_set_drvdata(pdev, &reset->rcdev);
-
-	ret = reset_controller_register(&reset->rcdev);
-	if (ret)
-		of_clk_del_provider(dev->of_node);
-
-	return ret;
+	return qcom_cc_probe(pdev, &gcc_msm8660_desc);
 }
 
 static int gcc_msm8660_remove(struct platform_device *pdev)
 {
-	of_clk_del_provider(pdev->dev.of_node);
-	reset_controller_unregister(platform_get_drvdata(pdev));
+	qcom_cc_remove(pdev);
 	return 0;
 }
 
diff --git a/drivers/clk/qcom/gcc-msm8960.c b/drivers/clk/qcom/gcc-msm8960.c
index fd446ab2fd98..633b019891bb 100644
--- a/drivers/clk/qcom/gcc-msm8960.c
+++ b/drivers/clk/qcom/gcc-msm8960.c
@@ -25,6 +25,7 @@
 #include <dt-bindings/clock/qcom,gcc-msm8960.h>
 #include <dt-bindings/reset/qcom,gcc-msm8960.h>
 
+#include "common.h"
 #include "clk-regmap.h"
 #include "clk-pll.h"
 #include "clk-rcg.h"
@@ -2875,51 +2876,24 @@ static const struct regmap_config gcc_msm8960_regmap_config = {
 	.fast_io	= true,
 };
 
+static const struct qcom_cc_desc gcc_msm8960_desc = {
+	.config = &gcc_msm8960_regmap_config,
+	.clks = gcc_msm8960_clks,
+	.num_clks = ARRAY_SIZE(gcc_msm8960_clks),
+	.resets = gcc_msm8960_resets,
+	.num_resets = ARRAY_SIZE(gcc_msm8960_resets),
+};
+
 static const struct of_device_id gcc_msm8960_match_table[] = {
 	{ .compatible = "qcom,gcc-msm8960" },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, gcc_msm8960_match_table);
 
-struct qcom_cc {
-	struct qcom_reset_controller reset;
-	struct clk_onecell_data data;
-	struct clk *clks[];
-};
-
 static int gcc_msm8960_probe(struct platform_device *pdev)
 {
-	void __iomem *base;
-	struct resource *res;
-	int i, ret;
-	struct device *dev = &pdev->dev;
 	struct clk *clk;
-	struct clk_onecell_data *data;
-	struct clk **clks;
-	struct regmap *regmap;
-	size_t num_clks;
-	struct qcom_reset_controller *reset;
-	struct qcom_cc *cc;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	base = devm_ioremap_resource(dev, res);
-	if (IS_ERR(base))
-		return PTR_ERR(base);
-
-	regmap = devm_regmap_init_mmio(dev, base, &gcc_msm8960_regmap_config);
-	if (IS_ERR(regmap))
-		return PTR_ERR(regmap);
-
-	num_clks = ARRAY_SIZE(gcc_msm8960_clks);
-	cc = devm_kzalloc(dev, sizeof(*cc) + sizeof(*clks) * num_clks,
-			  GFP_KERNEL);
-	if (!cc)
-		return -ENOMEM;
-
-	clks = cc->clks;
-	data = &cc->data;
-	data->clks = clks;
-	data->clk_num = num_clks;
+	struct device *dev = &pdev->dev;
 
 	/* Temporary until RPM clocks supported */
 	clk = clk_register_fixed_rate(dev, "cxo", NULL, CLK_IS_ROOT, 19200000);
@@ -2930,39 +2904,12 @@ static int gcc_msm8960_probe(struct platform_device *pdev)
 	if (IS_ERR(clk))
 		return PTR_ERR(clk);
 
-	for (i = 0; i < num_clks; i++) {
-		if (!gcc_msm8960_clks[i])
-			continue;
-		clk = devm_clk_register_regmap(dev, gcc_msm8960_clks[i]);
-		if (IS_ERR(clk))
-			return PTR_ERR(clk);
-		clks[i] = clk;
-	}
-
-	ret = of_clk_add_provider(dev->of_node, of_clk_src_onecell_get, data);
-	if (ret)
-		return ret;
-
-	reset = &cc->reset;
-	reset->rcdev.of_node = dev->of_node;
-	reset->rcdev.ops = &qcom_reset_ops,
-	reset->rcdev.owner = THIS_MODULE,
-	reset->rcdev.nr_resets = ARRAY_SIZE(gcc_msm8960_resets),
-	reset->regmap = regmap;
-	reset->reset_map = gcc_msm8960_resets,
-	platform_set_drvdata(pdev, &reset->rcdev);
-
-	ret = reset_controller_register(&reset->rcdev);
-	if (ret)
-		of_clk_del_provider(dev->of_node);
-
-	return ret;
+	return qcom_cc_probe(pdev, &gcc_msm8960_desc);
 }
 
 static int gcc_msm8960_remove(struct platform_device *pdev)
 {
-	of_clk_del_provider(pdev->dev.of_node);
-	reset_controller_unregister(platform_get_drvdata(pdev));
+	qcom_cc_remove(pdev);
 	return 0;
 }
 
diff --git a/drivers/clk/qcom/gcc-msm8974.c b/drivers/clk/qcom/gcc-msm8974.c
index 51d457e2b959..0d1edc1e9b31 100644
--- a/drivers/clk/qcom/gcc-msm8974.c
+++ b/drivers/clk/qcom/gcc-msm8974.c
@@ -25,6 +25,7 @@
 #include <dt-bindings/clock/qcom,gcc-msm8974.h>
 #include <dt-bindings/reset/qcom,gcc-msm8974.h>
 
+#include "common.h"
 #include "clk-regmap.h"
 #include "clk-pll.h"
 #include "clk-rcg.h"
@@ -2574,51 +2575,24 @@ static const struct regmap_config gcc_msm8974_regmap_config = {
 	.fast_io	= true,
 };
 
+static const struct qcom_cc_desc gcc_msm8974_desc = {
+	.config = &gcc_msm8974_regmap_config,
+	.clks = gcc_msm8974_clocks,
+	.num_clks = ARRAY_SIZE(gcc_msm8974_clocks),
+	.resets = gcc_msm8974_resets,
+	.num_resets = ARRAY_SIZE(gcc_msm8974_resets),
+};
+
 static const struct of_device_id gcc_msm8974_match_table[] = {
 	{ .compatible = "qcom,gcc-msm8974" },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, gcc_msm8974_match_table);
 
-struct qcom_cc {
-	struct qcom_reset_controller reset;
-	struct clk_onecell_data data;
-	struct clk *clks[];
-};
-
 static int gcc_msm8974_probe(struct platform_device *pdev)
 {
-	void __iomem *base;
-	struct resource *res;
-	int i, ret;
-	struct device *dev = &pdev->dev;
 	struct clk *clk;
-	struct clk_onecell_data *data;
-	struct clk **clks;
-	struct regmap *regmap;
-	size_t num_clks;
-	struct qcom_reset_controller *reset;
-	struct qcom_cc *cc;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	base = devm_ioremap_resource(dev, res);
-	if (IS_ERR(base))
-		return PTR_ERR(base);
-
-	regmap = devm_regmap_init_mmio(dev, base, &gcc_msm8974_regmap_config);
-	if (IS_ERR(regmap))
-		return PTR_ERR(regmap);
-
-	num_clks = ARRAY_SIZE(gcc_msm8974_clocks);
-	cc = devm_kzalloc(dev, sizeof(*cc) + sizeof(*clks) * num_clks,
-			  GFP_KERNEL);
-	if (!cc)
-		return -ENOMEM;
-
-	clks = cc->clks;
-	data = &cc->data;
-	data->clks = clks;
-	data->clk_num = num_clks;
+	struct device *dev = &pdev->dev;
 
 	/* Temporary until RPM clocks supported */
 	clk = clk_register_fixed_rate(dev, "xo", NULL, CLK_IS_ROOT, 19200000);
@@ -2631,39 +2605,12 @@ static int gcc_msm8974_probe(struct platform_device *pdev)
 	if (IS_ERR(clk))
 		return PTR_ERR(clk);
 
-	for (i = 0; i < num_clks; i++) {
-		if (!gcc_msm8974_clocks[i])
-			continue;
-		clk = devm_clk_register_regmap(dev, gcc_msm8974_clocks[i]);
-		if (IS_ERR(clk))
-			return PTR_ERR(clk);
-		clks[i] = clk;
-	}
-
-	ret = of_clk_add_provider(dev->of_node, of_clk_src_onecell_get, data);
-	if (ret)
-		return ret;
-
-	reset = &cc->reset;
-	reset->rcdev.of_node = dev->of_node;
-	reset->rcdev.ops = &qcom_reset_ops,
-	reset->rcdev.owner = THIS_MODULE,
-	reset->rcdev.nr_resets = ARRAY_SIZE(gcc_msm8974_resets),
-	reset->regmap = regmap;
-	reset->reset_map = gcc_msm8974_resets,
-	platform_set_drvdata(pdev, &reset->rcdev);
-
-	ret = reset_controller_register(&reset->rcdev);
-	if (ret)
-		of_clk_del_provider(dev->of_node);
-
-	return ret;
+	return qcom_cc_probe(pdev, &gcc_msm8974_desc);
 }
 
 static int gcc_msm8974_remove(struct platform_device *pdev)
 {
-	of_clk_del_provider(pdev->dev.of_node);
-	reset_controller_unregister(platform_get_drvdata(pdev));
+	qcom_cc_remove(pdev);
 	return 0;
 }
 
diff --git a/drivers/clk/qcom/mmcc-msm8960.c b/drivers/clk/qcom/mmcc-msm8960.c
index f9b59c7e48e9..12f3c0b64fcd 100644
--- a/drivers/clk/qcom/mmcc-msm8960.c
+++ b/drivers/clk/qcom/mmcc-msm8960.c
@@ -26,6 +26,7 @@
 #include <dt-bindings/clock/qcom,mmcc-msm8960.h>
 #include <dt-bindings/reset/qcom,mmcc-msm8960.h>
 
+#include "common.h"
 #include "clk-regmap.h"
 #include "clk-pll.h"
 #include "clk-rcg.h"
@@ -2222,85 +2223,28 @@ static const struct regmap_config mmcc_msm8960_regmap_config = {
 	.fast_io	= true,
 };
 
+static const struct qcom_cc_desc mmcc_msm8960_desc = {
+	.config = &mmcc_msm8960_regmap_config,
+	.clks = mmcc_msm8960_clks,
+	.num_clks = ARRAY_SIZE(mmcc_msm8960_clks),
+	.resets = mmcc_msm8960_resets,
+	.num_resets = ARRAY_SIZE(mmcc_msm8960_resets),
+};
+
 static const struct of_device_id mmcc_msm8960_match_table[] = {
 	{ .compatible = "qcom,mmcc-msm8960" },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, mmcc_msm8960_match_table);
 
-struct qcom_cc {
-	struct qcom_reset_controller reset;
-	struct clk_onecell_data data;
-	struct clk *clks[];
-};
-
 static int mmcc_msm8960_probe(struct platform_device *pdev)
 {
-	void __iomem *base;
-	struct resource *res;
-	int i, ret;
-	struct device *dev = &pdev->dev;
-	struct clk *clk;
-	struct clk_onecell_data *data;
-	struct clk **clks;
-	struct regmap *regmap;
-	size_t num_clks;
-	struct qcom_reset_controller *reset;
-	struct qcom_cc *cc;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	base = devm_ioremap_resource(dev, res);
-	if (IS_ERR(base))
-		return PTR_ERR(base);
-
-	regmap = devm_regmap_init_mmio(dev, base, &mmcc_msm8960_regmap_config);
-	if (IS_ERR(regmap))
-		return PTR_ERR(regmap);
-
-	num_clks = ARRAY_SIZE(mmcc_msm8960_clks);
-	cc = devm_kzalloc(dev, sizeof(*cc) + sizeof(*clks) * num_clks,
-			  GFP_KERNEL);
-	if (!cc)
-		return -ENOMEM;
-
-	clks = cc->clks;
-	data = &cc->data;
-	data->clks = clks;
-	data->clk_num = num_clks;
-
-	for (i = 0; i < num_clks; i++) {
-		if (!mmcc_msm8960_clks[i])
-			continue;
-		clk = devm_clk_register_regmap(dev, mmcc_msm8960_clks[i]);
-		if (IS_ERR(clk))
-			return PTR_ERR(clk);
-		clks[i] = clk;
-	}
-
-	ret = of_clk_add_provider(dev->of_node, of_clk_src_onecell_get, data);
-	if (ret)
-		return ret;
-
-	reset = &cc->reset;
-	reset->rcdev.of_node = dev->of_node;
-	reset->rcdev.ops = &qcom_reset_ops,
-	reset->rcdev.owner = THIS_MODULE,
-	reset->rcdev.nr_resets = ARRAY_SIZE(mmcc_msm8960_resets),
-	reset->regmap = regmap;
-	reset->reset_map = mmcc_msm8960_resets,
-	platform_set_drvdata(pdev, &reset->rcdev);
-
-	ret = reset_controller_register(&reset->rcdev);
-	if (ret)
-		of_clk_del_provider(dev->of_node);
-
-	return ret;
+	return qcom_cc_probe(pdev, &mmcc_msm8960_desc);
 }
 
 static int mmcc_msm8960_remove(struct platform_device *pdev)
 {
-	of_clk_del_provider(pdev->dev.of_node);
-	reset_controller_unregister(platform_get_drvdata(pdev));
+	qcom_cc_remove(pdev);
 	return 0;
 }
 
diff --git a/drivers/clk/qcom/mmcc-msm8974.c b/drivers/clk/qcom/mmcc-msm8974.c
index c95774514b81..60b7c24a5cd6 100644
--- a/drivers/clk/qcom/mmcc-msm8974.c
+++ b/drivers/clk/qcom/mmcc-msm8974.c
@@ -25,6 +25,7 @@
 #include <dt-bindings/clock/qcom,mmcc-msm8974.h>
 #include <dt-bindings/reset/qcom,mmcc-msm8974.h>
 
+#include "common.h"
 #include "clk-regmap.h"
 #include "clk-pll.h"
 #include "clk-rcg.h"
@@ -2524,88 +2525,39 @@ static const struct regmap_config mmcc_msm8974_regmap_config = {
 	.fast_io	= true,
 };
 
+static const struct qcom_cc_desc mmcc_msm8974_desc = {
+	.config = &mmcc_msm8974_regmap_config,
+	.clks = mmcc_msm8974_clocks,
+	.num_clks = ARRAY_SIZE(mmcc_msm8974_clocks),
+	.resets = mmcc_msm8974_resets,
+	.num_resets = ARRAY_SIZE(mmcc_msm8974_resets),
+};
+
 static const struct of_device_id mmcc_msm8974_match_table[] = {
 	{ .compatible = "qcom,mmcc-msm8974" },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, mmcc_msm8974_match_table);
 
-struct qcom_cc {
-	struct qcom_reset_controller reset;
-	struct clk_onecell_data data;
-	struct clk *clks[];
-};
-
 static int mmcc_msm8974_probe(struct platform_device *pdev)
 {
-	void __iomem *base;
-	struct resource *res;
-	int i, ret;
-	struct device *dev = &pdev->dev;
-	struct clk *clk;
-	struct clk_onecell_data *data;
-	struct clk **clks;
+	int ret;
 	struct regmap *regmap;
-	size_t num_clks;
-	struct qcom_reset_controller *reset;
-	struct qcom_cc *cc;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	base = devm_ioremap_resource(dev, res);
-	if (IS_ERR(base))
-		return PTR_ERR(base);
-
-	regmap = devm_regmap_init_mmio(dev, base, &mmcc_msm8974_regmap_config);
-	if (IS_ERR(regmap))
-		return PTR_ERR(regmap);
-
-	num_clks = ARRAY_SIZE(mmcc_msm8974_clocks);
-	cc = devm_kzalloc(dev, sizeof(*cc) + sizeof(*clks) * num_clks,
-			  GFP_KERNEL);
-	if (!cc)
-		return -ENOMEM;
-
-	clks = cc->clks;
-	data = &cc->data;
-	data->clks = clks;
-	data->clk_num = num_clks;
-
-	clk_pll_configure_sr_hpm_lp(&mmpll1, regmap, &mmpll1_config, true);
-	clk_pll_configure_sr_hpm_lp(&mmpll3, regmap, &mmpll3_config, false);
 
-	for (i = 0; i < num_clks; i++) {
-		if (!mmcc_msm8974_clocks[i])
-			continue;
-		clk = devm_clk_register_regmap(dev, mmcc_msm8974_clocks[i]);
-		if (IS_ERR(clk))
-			return PTR_ERR(clk);
-		clks[i] = clk;
-	}
-
-	ret = of_clk_add_provider(dev->of_node, of_clk_src_onecell_get, data);
+	ret = qcom_cc_probe(pdev, &mmcc_msm8974_desc);
 	if (ret)
 		return ret;
 
-	reset = &cc->reset;
-	reset->rcdev.of_node = dev->of_node;
-	reset->rcdev.ops = &qcom_reset_ops,
-	reset->rcdev.owner = THIS_MODULE,
-	reset->rcdev.nr_resets = ARRAY_SIZE(mmcc_msm8974_resets),
-	reset->regmap = regmap;
-	reset->reset_map = mmcc_msm8974_resets,
-	platform_set_drvdata(pdev, &reset->rcdev);
-
-	ret = reset_controller_register(&reset->rcdev);
-	if (ret)
-		of_clk_del_provider(dev->of_node);
+	regmap = dev_get_regmap(&pdev->dev, NULL);
+	clk_pll_configure_sr_hpm_lp(&mmpll1, regmap, &mmpll1_config, true);
+	clk_pll_configure_sr_hpm_lp(&mmpll3, regmap, &mmpll3_config, false);
 
-	return ret;
+	return 0;
 }
 
 static int mmcc_msm8974_remove(struct platform_device *pdev)
 {
-	of_clk_del_provider(pdev->dev.of_node);
-	reset_controller_unregister(platform_get_drvdata(pdev));
+	qcom_cc_remove(pdev);
 	return 0;
 }
 
-- 
cgit v1.2.3


From 2d85a713dca8b1c96e78e9f17c6a9bc88d11515a Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@codeaurora.org>
Date: Fri, 4 Apr 2014 11:31:29 -0500
Subject: clk: qcom: Add basic support for APQ8064 global clock controller
 clocks

The APQ8064 and MSM8960 share a significant amount of clock data and
code between the two SoCs.  Rather than duplicating the data we just add
support for a unqiue APQ8064 clock table into the MSM8960 code.

For now add just enough clocks to get a basic serial port going on an
APQ8064 device.

Signed-off-by: Kumar Gala <galak@codeaurora.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
[mturquette@linaro.org: trivial conflict due to missing ipq8064 support]
---
 .../devicetree/bindings/clock/qcom,gcc.txt         |  1 +
 drivers/clk/qcom/Kconfig                           |  4 +--
 drivers/clk/qcom/gcc-msm8960.c                     | 30 +++++++++++++++++++---
 3 files changed, 30 insertions(+), 5 deletions(-)

(limited to 'drivers')

diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.txt b/Documentation/devicetree/bindings/clock/qcom,gcc.txt
index 767401f42871..7b7104e8cb1e 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc.txt
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc.txt
@@ -4,6 +4,7 @@ Qualcomm Global Clock & Reset Controller Binding
 Required properties :
 - compatible : shall contain only one of the following:
 
+			"qcom,gcc-apq8064"
 			"qcom,gcc-msm8660"
 			"qcom,gcc-msm8960"
 			"qcom,gcc-msm8974"
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 995bcfa021a4..7f696b7d4422 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -13,10 +13,10 @@ config MSM_GCC_8660
 	  i2c, USB, SD/eMMC, etc.
 
 config MSM_GCC_8960
-	tristate "MSM8960 Global Clock Controller"
+	tristate "APQ8064/MSM8960 Global Clock Controller"
 	depends on COMMON_CLK_QCOM
 	help
-	  Support for the global clock controller on msm8960 devices.
+	  Support for the global clock controller on apq8064/msm8960 devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
 	  i2c, USB, SD/eMMC, SATA, PCIe, etc.
 
diff --git a/drivers/clk/qcom/gcc-msm8960.c b/drivers/clk/qcom/gcc-msm8960.c
index 633b019891bb..8e2b6ddcb8e4 100644
--- a/drivers/clk/qcom/gcc-msm8960.c
+++ b/drivers/clk/qcom/gcc-msm8960.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
  *
  * This software is licensed under the terms of the GNU General Public
  * License version 2, as published by the Free Software Foundation, and
@@ -2868,6 +2868,16 @@ static const struct qcom_reset_map gcc_msm8960_resets[] = {
 	[RIVA_RESET] = { 0x35e0 },
 };
 
+static struct clk_regmap *gcc_apq8064_clks[] = {
+	[PLL8] = &pll8.clkr,
+	[PLL8_VOTE] = &pll8_vote,
+	[GSBI7_UART_SRC] = &gsbi7_uart_src.clkr,
+	[GSBI7_UART_CLK] = &gsbi7_uart_clk.clkr,
+	[GSBI7_QUP_SRC] = &gsbi7_qup_src.clkr,
+	[GSBI7_QUP_CLK] = &gsbi7_qup_clk.clkr,
+	[GSBI7_H_CLK] = &gsbi7_h_clk.clkr,
+};
+
 static const struct regmap_config gcc_msm8960_regmap_config = {
 	.reg_bits	= 32,
 	.reg_stride	= 4,
@@ -2884,8 +2894,17 @@ static const struct qcom_cc_desc gcc_msm8960_desc = {
 	.num_resets = ARRAY_SIZE(gcc_msm8960_resets),
 };
 
+static const struct qcom_cc_desc gcc_apq8064_desc = {
+	.config = &gcc_msm8960_regmap_config,
+	.clks = gcc_apq8064_clks,
+	.num_clks = ARRAY_SIZE(gcc_apq8064_clks),
+	.resets = gcc_msm8960_resets,
+	.num_resets = ARRAY_SIZE(gcc_msm8960_resets),
+};
+
 static const struct of_device_id gcc_msm8960_match_table[] = {
-	{ .compatible = "qcom,gcc-msm8960" },
+	{ .compatible = "qcom,gcc-msm8960", .data = &gcc_msm8960_desc },
+	{ .compatible = "qcom,gcc-apq8064", .data = &gcc_apq8064_desc },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, gcc_msm8960_match_table);
@@ -2894,6 +2913,11 @@ static int gcc_msm8960_probe(struct platform_device *pdev)
 {
 	struct clk *clk;
 	struct device *dev = &pdev->dev;
+	const struct of_device_id *match;
+
+	match = of_match_device(gcc_msm8960_match_table, &pdev->dev);
+	if (!match)
+		return -EINVAL;
 
 	/* Temporary until RPM clocks supported */
 	clk = clk_register_fixed_rate(dev, "cxo", NULL, CLK_IS_ROOT, 19200000);
@@ -2904,7 +2928,7 @@ static int gcc_msm8960_probe(struct platform_device *pdev)
 	if (IS_ERR(clk))
 		return PTR_ERR(clk);
 
-	return qcom_cc_probe(pdev, &gcc_msm8960_desc);
+	return qcom_cc_probe(pdev, match->data);
 }
 
 static int gcc_msm8960_remove(struct platform_device *pdev)
-- 
cgit v1.2.3


From 2c07e3c7dd487fa40983aa20704b2755c9aac477 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@codeaurora.org>
Date: Fri, 4 Apr 2014 11:32:56 -0500
Subject: clk: qcom: Various fixes for MSM8960's global clock controller

* Remove CE2_SLEEP_CLK, doesn't exist on 8960 family SoCs
* Fix incorrect offset for PMIC_SSBI2_RESET
* Fix typo:
	SIC_TIC -> SPS_TIC_H
	SFAB_ADM0_M2_A_CLK -> SFAB_ADM0_M2_H_CLK
* Fix naming convention:
	SFAB_CFPB_S_HCLK -> SFAB_CFPB_S_H_CLK
	SATA_SRC_CLK -> SATA_CLK_SRC

Signed-off-by: Kumar Gala <galak@codeaurora.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/qcom/gcc-msm8960.c               | 4 ++--
 include/dt-bindings/clock/qcom,gcc-msm8960.h | 7 +++----
 include/dt-bindings/reset/qcom,gcc-msm8960.h | 2 +-
 3 files changed, 6 insertions(+), 7 deletions(-)

(limited to 'drivers')

diff --git a/drivers/clk/qcom/gcc-msm8960.c b/drivers/clk/qcom/gcc-msm8960.c
index 8e2b6ddcb8e4..f4ffd91901f8 100644
--- a/drivers/clk/qcom/gcc-msm8960.c
+++ b/drivers/clk/qcom/gcc-msm8960.c
@@ -2810,7 +2810,7 @@ static const struct qcom_reset_map gcc_msm8960_resets[] = {
 	[PPSS_PROC_RESET] = { 0x2594, 1 },
 	[PPSS_RESET] = { 0x2594},
 	[DMA_BAM_RESET] = { 0x25c0, 7 },
-	[SIC_TIC_RESET] = { 0x2600, 7 },
+	[SPS_TIC_H_RESET] = { 0x2600, 7 },
 	[SLIMBUS_H_RESET] = { 0x2620, 7 },
 	[SFAB_CFPB_M_RESET] = { 0x2680, 7 },
 	[SFAB_CFPB_S_RESET] = { 0x26c0, 7 },
@@ -2823,7 +2823,7 @@ static const struct qcom_reset_map gcc_msm8960_resets[] = {
 	[SFAB_SFPB_M_RESET] = { 0x2780, 7 },
 	[SFAB_SFPB_S_RESET] = { 0x27a0, 7 },
 	[RPM_PROC_RESET] = { 0x27c0, 7 },
-	[PMIC_SSBI2_RESET] = { 0x270c, 12 },
+	[PMIC_SSBI2_RESET] = { 0x280c, 12 },
 	[SDC1_RESET] = { 0x2830 },
 	[SDC2_RESET] = { 0x2850 },
 	[SDC3_RESET] = { 0x2870 },
diff --git a/include/dt-bindings/clock/qcom,gcc-msm8960.h b/include/dt-bindings/clock/qcom,gcc-msm8960.h
index 03bbf49d43b7..f9f547146a15 100644
--- a/include/dt-bindings/clock/qcom,gcc-msm8960.h
+++ b/include/dt-bindings/clock/qcom,gcc-msm8960.h
@@ -51,7 +51,7 @@
 #define QDSS_TSCTR_CLK				34
 #define SFAB_ADM0_M0_A_CLK			35
 #define SFAB_ADM0_M1_A_CLK			36
-#define SFAB_ADM0_M2_A_CLK			37
+#define SFAB_ADM0_M2_H_CLK			37
 #define ADM0_CLK				38
 #define ADM0_PBUS_CLK				39
 #define MSS_XPU_CLK				40
@@ -99,7 +99,7 @@
 #define CFPB2_H_CLK				82
 #define SFAB_CFPB_M_H_CLK			83
 #define CFPB_MASTER_H_CLK			84
-#define SFAB_CFPB_S_HCLK			85
+#define SFAB_CFPB_S_H_CLK			85
 #define CFPB_SPLITTER_H_CLK			86
 #define TSIF_H_CLK				87
 #define TSIF_INACTIVITY_TIMERS_CLK		88
@@ -110,7 +110,6 @@
 #define CE1_SLEEP_CLK				93
 #define CE2_H_CLK				94
 #define CE2_CORE_CLK				95
-#define CE2_SLEEP_CLK				96
 #define SFPB_H_CLK_SRC				97
 #define SFPB_H_CLK				98
 #define SFAB_SFPB_M_H_CLK			99
@@ -252,7 +251,7 @@
 #define MSS_S_H_CLK				235
 #define MSS_CXO_SRC_CLK				236
 #define SATA_H_CLK				237
-#define SATA_SRC_CLK				238
+#define SATA_CLK_SRC				238
 #define SATA_RXOOB_CLK				239
 #define SATA_PMALIVE_CLK			240
 #define SATA_PHY_REF_CLK			241
diff --git a/include/dt-bindings/reset/qcom,gcc-msm8960.h b/include/dt-bindings/reset/qcom,gcc-msm8960.h
index a840e680323c..07edd0e65eed 100644
--- a/include/dt-bindings/reset/qcom,gcc-msm8960.h
+++ b/include/dt-bindings/reset/qcom,gcc-msm8960.h
@@ -58,7 +58,7 @@
 #define PPSS_PROC_RESET					41
 #define PPSS_RESET					42
 #define DMA_BAM_RESET					43
-#define SIC_TIC_RESET					44
+#define SPS_TIC_H_RESET					44
 #define SLIMBUS_H_RESET					45
 #define SFAB_CFPB_M_RESET				46
 #define SFAB_CFPB_S_RESET				47
-- 
cgit v1.2.3


From 862b728387aef3a3776ad2a261e484aff36c5e67 Mon Sep 17 00:00:00 2001
From: Emilio López <emilio@elopez.com.ar>
Date: Fri, 2 May 2014 17:57:15 +0200
Subject: clk: sunxi: factors: automatic reparenting support
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This commit implements .determine_rate, so that our factor clocks can be
reparented when needed.

Signed-off-by: Emilio López <emilio@elopez.com.ar>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/sunxi/clk-factors.c | 36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

(limited to 'drivers')

diff --git a/drivers/clk/sunxi/clk-factors.c b/drivers/clk/sunxi/clk-factors.c
index 9e232644f07e..3806d97e529b 100644
--- a/drivers/clk/sunxi/clk-factors.c
+++ b/drivers/clk/sunxi/clk-factors.c
@@ -77,6 +77,41 @@ static long clk_factors_round_rate(struct clk_hw *hw, unsigned long rate,
 	return rate;
 }
 
+static long clk_factors_determine_rate(struct clk_hw *hw, unsigned long rate,
+				       unsigned long *best_parent_rate,
+				       struct clk **best_parent_p)
+{
+	struct clk *clk = hw->clk, *parent, *best_parent = NULL;
+	int i, num_parents;
+	unsigned long parent_rate, best = 0, child_rate, best_child_rate = 0;
+
+	/* find the parent that can help provide the fastest rate <= rate */
+	num_parents = __clk_get_num_parents(clk);
+	for (i = 0; i < num_parents; i++) {
+		parent = clk_get_parent_by_index(clk, i);
+		if (!parent)
+			continue;
+		if (__clk_get_flags(clk) & CLK_SET_RATE_PARENT)
+			parent_rate = __clk_round_rate(parent, rate);
+		else
+			parent_rate = __clk_get_rate(parent);
+
+		child_rate = clk_factors_round_rate(hw, rate, &parent_rate);
+
+		if (child_rate <= rate && child_rate > best_child_rate) {
+			best_parent = parent;
+			best = parent_rate;
+			best_child_rate = child_rate;
+		}
+	}
+
+	if (best_parent)
+		*best_parent_p = best_parent;
+	*best_parent_rate = best;
+
+	return best_child_rate;
+}
+
 static int clk_factors_set_rate(struct clk_hw *hw, unsigned long rate,
 				unsigned long parent_rate)
 {
@@ -113,6 +148,7 @@ static int clk_factors_set_rate(struct clk_hw *hw, unsigned long rate,
 }
 
 const struct clk_ops clk_factors_ops = {
+	.determine_rate = clk_factors_determine_rate,
 	.recalc_rate = clk_factors_recalc_rate,
 	.round_rate = clk_factors_round_rate,
 	.set_rate = clk_factors_set_rate,
-- 
cgit v1.2.3


From 95713978b0a2929b72933235bb07c0a793e71afa Mon Sep 17 00:00:00 2001
From: Emilio López <emilio@elopez.com.ar>
Date: Fri, 2 May 2014 17:57:16 +0200
Subject: clk: sunxi: Implement MMC phase control
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

HdG: add header exporting clk_sunxi_mmc_phase_control

Signed-off-by: Emilio López <emilio@elopez.com.ar>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/sunxi/clk-sunxi.c | 36 ++++++++++++++++++++++++++++++++++++
 include/linux/clk/sunxi.h     | 22 ++++++++++++++++++++++
 2 files changed, 58 insertions(+)
 create mode 100644 include/linux/clk/sunxi.h

(limited to 'drivers')

diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
index bd7dc733c1ca..59f90401b900 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -506,6 +506,42 @@ CLK_OF_DECLARE(sun7i_a20_gmac, "allwinner,sun7i-a20-gmac-clk",
 
 
 
+/**
+ * clk_sunxi_mmc_phase_control() - configures MMC clock phase control
+ */
+
+void clk_sunxi_mmc_phase_control(struct clk_hw *hw, u8 sample, u8 output)
+{
+	#define to_clk_composite(_hw) container_of(_hw, struct clk_composite, hw)
+	#define to_clk_factors(_hw) container_of(_hw, struct clk_factors, hw)
+
+	struct clk_composite *composite = to_clk_composite(hw);
+	struct clk_hw *rate_hw = composite->rate_hw;
+	struct clk_factors *factors = to_clk_factors(rate_hw);
+	unsigned long flags = 0;
+	u32 reg;
+
+	if (factors->lock)
+		spin_lock_irqsave(factors->lock, flags);
+
+	reg = readl(factors->reg);
+
+	/* set sample clock phase control */
+	reg &= ~(0x7 << 20);
+	reg |= ((sample & 0x7) << 20);
+
+	/* set output clock phase control */
+	reg &= ~(0x7 << 8);
+	reg |= ((output & 0x7) << 8);
+
+	writel(reg, factors->reg);
+
+	if (factors->lock)
+		spin_unlock_irqrestore(factors->lock, flags);
+}
+EXPORT_SYMBOL(clk_sunxi_mmc_phase_control);
+
+
 /**
  * sunxi_factors_clk_setup() - Setup function for factor clocks
  */
diff --git a/include/linux/clk/sunxi.h b/include/linux/clk/sunxi.h
new file mode 100644
index 000000000000..1ef5c899e458
--- /dev/null
+++ b/include/linux/clk/sunxi.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2013 - Hans de Goede <hdegoede@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_CLK_SUNXI_H_
+#define __LINUX_CLK_SUNXI_H_
+
+#include <linux/clk.h>
+
+void clk_sunxi_mmc_phase_control(struct clk_hw *hw, u8 sample, u8 output);
+
+#endif
-- 
cgit v1.2.3


From 156342a1e5719e50e001dec0ee8dfefefebb7606 Mon Sep 17 00:00:00 2001
From: Zhangfei Gao <zhangfei.gao@linaro.org>
Date: Mon, 21 Apr 2014 11:35:21 +0800
Subject: clk: hisi: use clk_register_mux_table in hisi_clk_register_mux

Platform hix5hd2 use mux table, so use clk_register_mux_table instead

Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
 drivers/clk/hisilicon/clk.c | 13 ++++++++-----
 drivers/clk/hisilicon/clk.h |  1 +
 2 files changed, 9 insertions(+), 5 deletions(-)

(limited to 'drivers')

diff --git a/drivers/clk/hisilicon/clk.c b/drivers/clk/hisilicon/clk.c
index 276f672e7b1a..269938852f4f 100644
--- a/drivers/clk/hisilicon/clk.c
+++ b/drivers/clk/hisilicon/clk.c
@@ -127,11 +127,14 @@ void __init hisi_clk_register_mux(struct hisi_mux_clock *clks,
 	int i;
 
 	for (i = 0; i < nums; i++) {
-		clk = clk_register_mux(NULL, clks[i].name, clks[i].parent_names,
-				       clks[i].num_parents, clks[i].flags,
-				       base + clks[i].offset, clks[i].shift,
-				       clks[i].width, clks[i].mux_flags,
-				       &hisi_clk_lock);
+		u32 mask = BIT(clks[i].width) - 1;
+
+		clk = clk_register_mux_table(NULL, clks[i].name,
+					clks[i].parent_names,
+					clks[i].num_parents, clks[i].flags,
+					base + clks[i].offset, clks[i].shift,
+					mask, clks[i].mux_flags,
+					clks[i].table, &hisi_clk_lock);
 		if (IS_ERR(clk)) {
 			pr_err("%s: failed to register clock %s\n",
 			       __func__, clks[i].name);
diff --git a/drivers/clk/hisilicon/clk.h b/drivers/clk/hisilicon/clk.h
index 43fa5da88f02..bc39a6aa475e 100644
--- a/drivers/clk/hisilicon/clk.h
+++ b/drivers/clk/hisilicon/clk.h
@@ -62,6 +62,7 @@ struct hisi_mux_clock {
 	u8			shift;
 	u8			width;
 	u8			mux_flags;
+	u32			*table;
 	const char		*alias;
 };
 
-- 
cgit v1.2.3


From 8b9dcb6cb7b69e6990bc4134546be5059342916c Mon Sep 17 00:00:00 2001
From: Zhangfei Gao <zhangfei.gao@linaro.org>
Date: Tue, 22 Apr 2014 15:42:47 +0800
Subject: clk: hisi: add hisi_clk_register_gate

Add hisi_clk_register_gate register clk gate table

Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
 drivers/clk/hisilicon/clk.c | 28 ++++++++++++++++++++++++++++
 drivers/clk/hisilicon/clk.h |  2 ++
 2 files changed, 30 insertions(+)

(limited to 'drivers')

diff --git a/drivers/clk/hisilicon/clk.c b/drivers/clk/hisilicon/clk.c
index 269938852f4f..a078e84f7b05 100644
--- a/drivers/clk/hisilicon/clk.c
+++ b/drivers/clk/hisilicon/clk.c
@@ -177,6 +177,34 @@ void __init hisi_clk_register_divider(struct hisi_divider_clock *clks,
 	}
 }
 
+void __init hisi_clk_register_gate(struct hisi_gate_clock *clks,
+				       int nums, struct hisi_clock_data *data)
+{
+	struct clk *clk;
+	void __iomem *base = data->base;
+	int i;
+
+	for (i = 0; i < nums; i++) {
+		clk = clk_register_gate(NULL, clks[i].name,
+						clks[i].parent_name,
+						clks[i].flags,
+						base + clks[i].offset,
+						clks[i].bit_idx,
+						clks[i].gate_flags,
+						&hisi_clk_lock);
+		if (IS_ERR(clk)) {
+			pr_err("%s: failed to register clock %s\n",
+			       __func__, clks[i].name);
+			continue;
+		}
+
+		if (clks[i].alias)
+			clk_register_clkdev(clk, clks[i].alias, NULL);
+
+		data->clk_data.clks[clks[i].id] = clk;
+	}
+}
+
 void __init hisi_clk_register_gate_sep(struct hisi_gate_clock *clks,
 				       int nums, struct hisi_clock_data *data)
 {
diff --git a/drivers/clk/hisilicon/clk.h b/drivers/clk/hisilicon/clk.h
index bc39a6aa475e..31083ffc0650 100644
--- a/drivers/clk/hisilicon/clk.h
+++ b/drivers/clk/hisilicon/clk.h
@@ -104,6 +104,8 @@ void __init hisi_clk_register_mux(struct hisi_mux_clock *, int,
 				struct hisi_clock_data *);
 void __init hisi_clk_register_divider(struct hisi_divider_clock *,
 				int, struct hisi_clock_data *);
+void __init hisi_clk_register_gate(struct hisi_gate_clock *,
+					int, struct hisi_clock_data *);
 void __init hisi_clk_register_gate_sep(struct hisi_gate_clock *,
 					int, struct hisi_clock_data *);
 #endif	/* __HISI_CLK_H */
-- 
cgit v1.2.3


From 5efaf09021a5817e5a274aa2d2fad8d92d12ed92 Mon Sep 17 00:00:00 2001
From: Zhangfei Gao <zhangfei.gao@linaro.org>
Date: Mon, 21 Apr 2014 12:07:27 +0800
Subject: clk: hisi: add clk-hix5hd2.c

Signed-off-by: Haifeng Yan <haifeng.yan@linaro.org>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
 .../devicetree/bindings/clock/hix5hd2-clock.txt    |  31 +++++++
 drivers/clk/Makefile                               |   1 +
 drivers/clk/hisilicon/Makefile                     |   1 +
 drivers/clk/hisilicon/clk-hix5hd2.c                | 101 +++++++++++++++++++++
 include/dt-bindings/clock/hix5hd2-clock.h          |  58 ++++++++++++
 5 files changed, 192 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/hix5hd2-clock.txt
 create mode 100644 drivers/clk/hisilicon/clk-hix5hd2.c
 create mode 100644 include/dt-bindings/clock/hix5hd2-clock.h

(limited to 'drivers')

diff --git a/Documentation/devicetree/bindings/clock/hix5hd2-clock.txt b/Documentation/devicetree/bindings/clock/hix5hd2-clock.txt
new file mode 100644
index 000000000000..7894a64887cb
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/hix5hd2-clock.txt
@@ -0,0 +1,31 @@
+* Hisilicon Hix5hd2 Clock Controller
+
+The hix5hd2 clock controller generates and supplies clock to various
+controllers within the hix5hd2 SoC.
+
+Required Properties:
+
+- compatible: should be "hisilicon,hix5hd2-clock"
+- reg: Address and length of the register set
+- #clock-cells: Should be <1>
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/hix5hd2-clock.h>.
+
+Examples:
+	clock: clock@f8a22000 {
+		compatible = "hisilicon,hix5hd2-clock";
+		reg = <0xf8a22000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	uart0: uart@f8b00000 {
+		compatible = "arm,pl011", "arm,primecell";
+		reg = <0xf8b00000 0x1000>;
+		interrupts = <0 49 4>;
+		clocks = <&clock HIX5HD2_FIXED_83M>;
+		clock-names = "apb_pclk";
+		status = "disabled";
+	};
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 5f8a28735c96..3e6e577c01db 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -33,6 +33,7 @@ obj-$(CONFIG_COMMON_CLK_AT91)		+= at91/
 obj-$(CONFIG_ARCH_BCM_MOBILE)		+= bcm/
 obj-$(CONFIG_ARCH_HI3xxx)		+= hisilicon/
 obj-$(CONFIG_ARCH_HIP04)		+= hisilicon/
+obj-$(CONFIG_ARCH_HIX5HD2)		+= hisilicon/
 obj-$(CONFIG_COMMON_CLK_KEYSTONE)	+= keystone/
 ifeq ($(CONFIG_COMMON_CLK), y)
 obj-$(CONFIG_ARCH_MMP)			+= mmp/
diff --git a/drivers/clk/hisilicon/Makefile b/drivers/clk/hisilicon/Makefile
index 40b33c6a8257..038c02f4d0e7 100644
--- a/drivers/clk/hisilicon/Makefile
+++ b/drivers/clk/hisilicon/Makefile
@@ -6,3 +6,4 @@ obj-y	+= clk.o clkgate-separated.o
 
 obj-$(CONFIG_ARCH_HI3xxx)	+= clk-hi3620.o
 obj-$(CONFIG_ARCH_HIP04)	+= clk-hip04.o
+obj-$(CONFIG_ARCH_HIX5HD2)	+= clk-hix5hd2.o
diff --git a/drivers/clk/hisilicon/clk-hix5hd2.c b/drivers/clk/hisilicon/clk-hix5hd2.c
new file mode 100644
index 000000000000..e5fcfb4e32ef
--- /dev/null
+++ b/drivers/clk/hisilicon/clk-hix5hd2.c
@@ -0,0 +1,101 @@
+/*
+ * Copyright (c) 2014 Linaro Ltd.
+ * Copyright (c) 2014 Hisilicon Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ */
+
+#include <linux/of_address.h>
+#include <dt-bindings/clock/hix5hd2-clock.h>
+#include "clk.h"
+
+static struct hisi_fixed_rate_clock hix5hd2_fixed_rate_clks[] __initdata = {
+	{ HIX5HD2_FIXED_1200M, "1200m", NULL, CLK_IS_ROOT, 1200000000, },
+	{ HIX5HD2_FIXED_400M, "400m", NULL, CLK_IS_ROOT, 400000000, },
+	{ HIX5HD2_FIXED_48M, "48m", NULL, CLK_IS_ROOT, 48000000, },
+	{ HIX5HD2_FIXED_24M, "24m", NULL, CLK_IS_ROOT, 24000000, },
+	{ HIX5HD2_FIXED_600M, "600m", NULL, CLK_IS_ROOT, 600000000, },
+	{ HIX5HD2_FIXED_300M, "300m", NULL, CLK_IS_ROOT, 300000000, },
+	{ HIX5HD2_FIXED_75M, "75m", NULL, CLK_IS_ROOT, 75000000, },
+	{ HIX5HD2_FIXED_200M, "200m", NULL, CLK_IS_ROOT, 200000000, },
+	{ HIX5HD2_FIXED_100M, "100m", NULL, CLK_IS_ROOT, 100000000, },
+	{ HIX5HD2_FIXED_40M, "40m", NULL, CLK_IS_ROOT, 40000000, },
+	{ HIX5HD2_FIXED_150M, "150m", NULL, CLK_IS_ROOT, 150000000, },
+	{ HIX5HD2_FIXED_1728M, "1728m", NULL, CLK_IS_ROOT, 1728000000, },
+	{ HIX5HD2_FIXED_28P8M, "28p8m", NULL, CLK_IS_ROOT, 28000000, },
+	{ HIX5HD2_FIXED_432M, "432m", NULL, CLK_IS_ROOT, 432000000, },
+	{ HIX5HD2_FIXED_345P6M, "345p6m", NULL, CLK_IS_ROOT, 345000000, },
+	{ HIX5HD2_FIXED_288M, "288m", NULL, CLK_IS_ROOT, 288000000, },
+	{ HIX5HD2_FIXED_60M,	"60m", NULL, CLK_IS_ROOT, 60000000, },
+	{ HIX5HD2_FIXED_750M, "750m", NULL, CLK_IS_ROOT, 750000000, },
+	{ HIX5HD2_FIXED_500M, "500m", NULL, CLK_IS_ROOT, 500000000, },
+	{ HIX5HD2_FIXED_54M,	"54m", NULL, CLK_IS_ROOT, 54000000, },
+	{ HIX5HD2_FIXED_27M, "27m", NULL, CLK_IS_ROOT, 27000000, },
+	{ HIX5HD2_FIXED_1500M, "1500m", NULL, CLK_IS_ROOT, 1500000000, },
+	{ HIX5HD2_FIXED_375M, "375m", NULL, CLK_IS_ROOT, 375000000, },
+	{ HIX5HD2_FIXED_187M, "187m", NULL, CLK_IS_ROOT, 187000000, },
+	{ HIX5HD2_FIXED_250M, "250m", NULL, CLK_IS_ROOT, 250000000, },
+	{ HIX5HD2_FIXED_125M, "125m", NULL, CLK_IS_ROOT, 125000000, },
+	{ HIX5HD2_FIXED_2P02M, "2m", NULL, CLK_IS_ROOT, 2000000, },
+	{ HIX5HD2_FIXED_50M, "50m", NULL, CLK_IS_ROOT, 50000000, },
+	{ HIX5HD2_FIXED_25M, "25m", NULL, CLK_IS_ROOT, 25000000, },
+	{ HIX5HD2_FIXED_83M, "83m", NULL, CLK_IS_ROOT, 83333333, },
+};
+
+static const char *sfc_mux_p[] __initconst = {
+		"24m", "150m", "200m", "100m", "75m", };
+static u32 sfc_mux_table[] = {0, 4, 5, 6, 7};
+
+static const char *sdio1_mux_p[] __initconst = {
+		"75m", "100m", "50m", "15m", };
+static u32 sdio1_mux_table[] = {0, 1, 2, 3};
+
+static const char *fephy_mux_p[] __initconst = { "25m", "125m"};
+static u32 fephy_mux_table[] = {0, 1};
+
+
+static struct hisi_mux_clock hix5hd2_mux_clks[] __initdata = {
+	{ HIX5HD2_SFC_MUX, "sfc_mux", sfc_mux_p, ARRAY_SIZE(sfc_mux_p),
+		CLK_SET_RATE_PARENT, 0x5c, 8, 3, 0, sfc_mux_table, },
+	{ HIX5HD2_MMC_MUX, "mmc_mux", sdio1_mux_p, ARRAY_SIZE(sdio1_mux_p),
+		CLK_SET_RATE_PARENT, 0xa0, 8, 2, 0, sdio1_mux_table, },
+	{ HIX5HD2_FEPHY_MUX, "fephy_mux",
+		fephy_mux_p, ARRAY_SIZE(fephy_mux_p),
+		CLK_SET_RATE_PARENT, 0x120, 8, 2, 0, fephy_mux_table, },
+};
+
+static struct hisi_gate_clock hix5hd2_gate_clks[] __initdata = {
+	/*sfc*/
+	{ HIX5HD2_SFC_CLK, "clk_sfc", "sfc_mux",
+		CLK_SET_RATE_PARENT, 0x5c, 0, 0, },
+	{ HIX5HD2_SFC_RST, "rst_sfc", "clk_sfc",
+		CLK_SET_RATE_PARENT, 0x5c, 4, CLK_GATE_SET_TO_DISABLE, },
+	/*sdio1*/
+	{ HIX5HD2_MMC_BIU_CLK, "clk_mmc_biu", "200m",
+		CLK_SET_RATE_PARENT, 0xa0, 0, 0, },
+	{ HIX5HD2_MMC_CIU_CLK, "clk_mmc_ciu", "mmc_mux",
+		CLK_SET_RATE_PARENT, 0xa0, 1, 0, },
+	{ HIX5HD2_MMC_CIU_RST, "rst_mmc_ciu", "clk_mmc_ciu",
+		CLK_SET_RATE_PARENT, 0xa0, 4, CLK_GATE_SET_TO_DISABLE, },
+};
+
+static void __init hix5hd2_clk_init(struct device_node *np)
+{
+	struct hisi_clock_data *clk_data;
+
+	clk_data = hisi_clk_init(np, HIX5HD2_NR_CLKS);
+	if (!clk_data)
+		return;
+
+	hisi_clk_register_fixed_rate(hix5hd2_fixed_rate_clks,
+				     ARRAY_SIZE(hix5hd2_fixed_rate_clks),
+				     clk_data);
+	hisi_clk_register_mux(hix5hd2_mux_clks, ARRAY_SIZE(hix5hd2_mux_clks),
+					clk_data);
+	hisi_clk_register_gate(hix5hd2_gate_clks,
+			ARRAY_SIZE(hix5hd2_gate_clks), clk_data);
+}
+
+CLK_OF_DECLARE(hix5hd2_clk, "hisilicon,hix5hd2-clock", hix5hd2_clk_init);
diff --git a/include/dt-bindings/clock/hix5hd2-clock.h b/include/dt-bindings/clock/hix5hd2-clock.h
new file mode 100644
index 000000000000..aad579a75802
--- /dev/null
+++ b/include/dt-bindings/clock/hix5hd2-clock.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright (c) 2014 Linaro Ltd.
+ * Copyright (c) 2014 Hisilicon Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ */
+
+#ifndef __DTS_HIX5HD2_CLOCK_H
+#define __DTS_HIX5HD2_CLOCK_H
+
+/* fixed rate */
+#define HIX5HD2_FIXED_1200M		1
+#define HIX5HD2_FIXED_400M		2
+#define HIX5HD2_FIXED_48M		3
+#define HIX5HD2_FIXED_24M		4
+#define HIX5HD2_FIXED_600M		5
+#define HIX5HD2_FIXED_300M		6
+#define HIX5HD2_FIXED_75M		7
+#define HIX5HD2_FIXED_200M		8
+#define HIX5HD2_FIXED_100M		9
+#define HIX5HD2_FIXED_40M		10
+#define HIX5HD2_FIXED_150M		11
+#define HIX5HD2_FIXED_1728M		12
+#define HIX5HD2_FIXED_28P8M		13
+#define HIX5HD2_FIXED_432M		14
+#define HIX5HD2_FIXED_345P6M		15
+#define HIX5HD2_FIXED_288M		16
+#define HIX5HD2_FIXED_60M		17
+#define HIX5HD2_FIXED_750M		18
+#define HIX5HD2_FIXED_500M		19
+#define HIX5HD2_FIXED_54M		20
+#define HIX5HD2_FIXED_27M		21
+#define HIX5HD2_FIXED_1500M		22
+#define HIX5HD2_FIXED_375M		23
+#define HIX5HD2_FIXED_187M		24
+#define HIX5HD2_FIXED_250M		25
+#define HIX5HD2_FIXED_125M		26
+#define HIX5HD2_FIXED_2P02M		27
+#define HIX5HD2_FIXED_50M		28
+#define HIX5HD2_FIXED_25M		29
+#define HIX5HD2_FIXED_83M		30
+
+/* mux clocks */
+#define HIX5HD2_SFC_MUX			64
+#define HIX5HD2_MMC_MUX			65
+#define HIX5HD2_FEPHY_MUX		66
+
+/* gate clocks */
+#define HIX5HD2_SFC_RST			128
+#define HIX5HD2_SFC_CLK			129
+#define HIX5HD2_MMC_CIU_CLK		130
+#define HIX5HD2_MMC_BIU_CLK		131
+#define HIX5HD2_MMC_CIU_RST		132
+
+#define HIX5HD2_NR_CLKS			256
+#endif	/* __DTS_HIX5HD2_CLOCK_H */
-- 
cgit v1.2.3


From 0691bb1b5a1865b3bbc9b7ce6e26eff546abb1cf Mon Sep 17 00:00:00 2001
From: Dinh Nguyen <dinguyen@altera.com>
Date: Mon, 12 May 2014 12:27:22 -0500
Subject: clk: socfpga: add divider registers to the main pll outputs

The C0(mpu_clk), C1(main_clk), and C2(dbg_base_clk) outputs from the main
PLL go through a pre-divider before coming into the system. These registers
were hidden for the CycloneV platform, but are now used for the ArriaV
platform.

This patch updates the clock driver to read the div-reg property for the
socfpga-periph-clk clocks. Also moves the div_mask define to clk.h for re-use.

Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
---
 drivers/clk/socfpga/clk-gate.c   |  1 -
 drivers/clk/socfpga/clk-periph.c | 22 +++++++++++++++++++---
 drivers/clk/socfpga/clk.h        |  4 ++++
 3 files changed, 23 insertions(+), 4 deletions(-)

(limited to 'drivers')

diff --git a/drivers/clk/socfpga/clk-gate.c b/drivers/clk/socfpga/clk-gate.c
index 501d513bf890..dd3a78c64795 100644
--- a/drivers/clk/socfpga/clk-gate.c
+++ b/drivers/clk/socfpga/clk-gate.c
@@ -32,7 +32,6 @@
 #define SOCFPGA_MMC_CLK			"sdmmc_clk"
 #define SOCFPGA_GPIO_DB_CLK_OFFSET	0xA8
 
-#define div_mask(width)	((1 << (width)) - 1)
 #define streq(a, b) (strcmp((a), (b)) == 0)
 
 #define to_socfpga_gate_clk(p) container_of(p, struct socfpga_gate_clk, hw.hw)
diff --git a/drivers/clk/socfpga/clk-periph.c b/drivers/clk/socfpga/clk-periph.c
index 81623a3736f9..46531c34ec9b 100644
--- a/drivers/clk/socfpga/clk-periph.c
+++ b/drivers/clk/socfpga/clk-periph.c
@@ -29,12 +29,18 @@ static unsigned long clk_periclk_recalc_rate(struct clk_hw *hwclk,
 					     unsigned long parent_rate)
 {
 	struct socfpga_periph_clk *socfpgaclk = to_socfpga_periph_clk(hwclk);
-	u32 div;
+	u32 div, val;
 
-	if (socfpgaclk->fixed_div)
+	if (socfpgaclk->fixed_div) {
 		div = socfpgaclk->fixed_div;
-	else
+	} else {
+		if (socfpgaclk->div_reg) {
+			val = readl(socfpgaclk->div_reg) >> socfpgaclk->shift;
+			val &= div_mask(socfpgaclk->width);
+			parent_rate /= (val + 1);
+		}
 		div = ((readl(socfpgaclk->hw.reg) & 0x1ff) + 1);
+	}
 
 	return parent_rate / div;
 }
@@ -54,6 +60,7 @@ static __init void __socfpga_periph_init(struct device_node *node,
 	struct clk_init_data init;
 	int rc;
 	u32 fixed_div;
+	u32 div_reg[3];
 
 	of_property_read_u32(node, "reg", &reg);
 
@@ -63,6 +70,15 @@ static __init void __socfpga_periph_init(struct device_node *node,
 
 	periph_clk->hw.reg = clk_mgr_base_addr + reg;
 
+	rc = of_property_read_u32_array(node, "div-reg", div_reg, 3);
+	if (!rc) {
+		periph_clk->div_reg = clk_mgr_base_addr + div_reg[0];
+		periph_clk->shift = div_reg[1];
+		periph_clk->width = div_reg[2];
+	} else {
+		periph_clk->div_reg = 0;
+	}
+
 	rc = of_property_read_u32(node, "fixed-divider", &fixed_div);
 	if (rc)
 		periph_clk->fixed_div = 0;
diff --git a/drivers/clk/socfpga/clk.h b/drivers/clk/socfpga/clk.h
index d2e54019c94f..d291f60c46e1 100644
--- a/drivers/clk/socfpga/clk.h
+++ b/drivers/clk/socfpga/clk.h
@@ -27,6 +27,7 @@
 #define CLKMGR_PERPLL_SRC	0xAC
 
 #define SOCFPGA_MAX_PARENTS		3
+#define div_mask(width) ((1 << (width)) - 1)
 
 extern void __iomem *clk_mgr_base_addr;
 
@@ -52,6 +53,9 @@ struct socfpga_periph_clk {
 	struct clk_gate hw;
 	char *parent_name;
 	u32 fixed_div;
+	void __iomem *div_reg;
+	u32 width;      /* only valid if div_reg != 0 */
+	u32 shift;      /* only valid if div_reg != 0 */
 };
 
 #endif /* SOCFPGA_CLK_H */
-- 
cgit v1.2.3


From 7b42a997bfb93c6ae0709f34ec8e2860757804b5 Mon Sep 17 00:00:00 2001
From: Simon Horman <horms+renesas@verge.net.au>
Date: Fri, 18 Apr 2014 08:05:50 +0900
Subject: clk: shmobile: r8a7779: Add clocks support

The R8A7779 SoC has several clocks that are too custom to be supported in a
generic driver. Those clocks are all fixed rate clocks with multiplier and
divisor set according to boot mode configuration.

Based on work for R-Car Gen2 SoCs by Laurent Pinchart.

Cc: devicetree@vger.kernel.org
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 .../bindings/clock/renesas,r8a7779-cpg-clocks.txt  |  27 ++++
 drivers/clk/shmobile/Makefile                      |   1 +
 drivers/clk/shmobile/clk-r8a7779.c                 | 180 +++++++++++++++++++++
 include/linux/clk/shmobile.h                       |   3 +
 4 files changed, 211 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/renesas,r8a7779-cpg-clocks.txt
 create mode 100644 drivers/clk/shmobile/clk-r8a7779.c

(limited to 'drivers')

diff --git a/Documentation/devicetree/bindings/clock/renesas,r8a7779-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,r8a7779-cpg-clocks.txt
new file mode 100644
index 000000000000..ed3c8cb12f4e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,r8a7779-cpg-clocks.txt
@@ -0,0 +1,27 @@
+* Renesas R8A7779 Clock Pulse Generator (CPG)
+
+The CPG generates core clocks for the R8A7779. It includes one PLL and
+several fixed ratio dividers
+
+Required Properties:
+
+  - compatible: Must be "renesas,r8a7779-cpg-clocks"
+  - reg: Base address and length of the memory resource used by the CPG
+
+  - clocks: Reference to the parent clock
+  - #clock-cells: Must be 1
+  - clock-output-names: The names of the clocks. Supported clocks are "plla",
+    "z", "zs", "s", "s1", "p", "b", "out".
+
+
+Example
+-------
+
+	cpg_clocks: cpg_clocks@ffc80000 {
+		compatible = "renesas,r8a7779-cpg-clocks";
+		reg = <0 0xffc80000 0 0x30>;
+		clocks = <&extal_clk>;
+		#clock-cells = <1>;
+		clock-output-names = "plla", "z", "zs", "s", "s1", "p",
+		                     "b", "out";
+	};
diff --git a/drivers/clk/shmobile/Makefile b/drivers/clk/shmobile/Makefile
index 5404cb931ebf..bdf342daefa5 100644
--- a/drivers/clk/shmobile/Makefile
+++ b/drivers/clk/shmobile/Makefile
@@ -1,5 +1,6 @@
 obj-$(CONFIG_ARCH_EMEV2)		+= clk-emev2.o
 obj-$(CONFIG_ARCH_R7S72100)		+= clk-rz.o
+obj-$(CONFIG_ARCH_R8A7779)		+= clk-r8a7779.o
 obj-$(CONFIG_ARCH_R8A7790)		+= clk-rcar-gen2.o
 obj-$(CONFIG_ARCH_R8A7791)		+= clk-rcar-gen2.o
 obj-$(CONFIG_ARCH_SHMOBILE_MULTI)	+= clk-div6.o
diff --git a/drivers/clk/shmobile/clk-r8a7779.c b/drivers/clk/shmobile/clk-r8a7779.c
new file mode 100644
index 000000000000..652ecacb6daf
--- /dev/null
+++ b/drivers/clk/shmobile/clk-r8a7779.c
@@ -0,0 +1,180 @@
+/*
+ * r8a7779 Core CPG Clocks
+ *
+ * Copyright (C) 2013, 2014 Horms Solutions Ltd.
+ *
+ * Contact: Simon Horman <horms@verge.net.au>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk/shmobile.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/spinlock.h>
+
+#include <dt-bindings/clock/r8a7779-clock.h>
+
+#define CPG_NUM_CLOCKS			(R8A7779_CLK_OUT + 1)
+
+struct r8a7779_cpg {
+	struct clk_onecell_data data;
+	spinlock_t lock;
+	void __iomem *reg;
+};
+
+/* -----------------------------------------------------------------------------
+ * CPG Clock Data
+ */
+
+/*
+ *		MD1 = 1			MD1 = 0
+ *		(PLLA = 1500)		(PLLA = 1600)
+ *		(MHz)			(MHz)
+ *------------------------------------------------+--------------------
+ * clkz		1000   (2/3)		800   (1/2)
+ * clkzs	 250   (1/6)		200   (1/8)
+ * clki		 750   (1/2)		800   (1/2)
+ * clks		 250   (1/6)		200   (1/8)
+ * clks1	 125   (1/12)		100   (1/16)
+ * clks3	 187.5 (1/8)		200   (1/8)
+ * clks4	  93.7 (1/16)		100   (1/16)
+ * clkp		  62.5 (1/24)		 50   (1/32)
+ * clkg		  62.5 (1/24)		 66.6 (1/24)
+ * clkb, CLKOUT
+ * (MD2 = 0)	  62.5 (1/24)		 66.6 (1/24)
+ * (MD2 = 1)	  41.6 (1/36)		 50   (1/32)
+ */
+
+#define CPG_CLK_CONFIG_INDEX(md)	(((md) & (BIT(2)|BIT(1))) >> 1)
+
+struct cpg_clk_config {
+	unsigned int z_mult;
+	unsigned int z_div;
+	unsigned int zs_and_s_div;
+	unsigned int s1_div;
+	unsigned int p_div;
+	unsigned int b_and_out_div;
+};
+
+static const struct cpg_clk_config cpg_clk_configs[4] __initconst = {
+	{ 1, 2, 8, 16, 32, 24 },
+	{ 2, 3, 6, 12, 24, 24 },
+	{ 1, 2, 8, 16, 32, 32 },
+	{ 2, 3, 6, 12, 24, 36 },
+};
+
+/*
+ *   MD		PLLA Ratio
+ * 12 11
+ *------------------------
+ * 0  0		x42
+ * 0  1		x48
+ * 1  0		x56
+ * 1  1		x64
+ */
+
+#define CPG_PLLA_MULT_INDEX(md)	(((md) & (BIT(12)|BIT(11))) >> 11)
+
+static const unsigned int cpg_plla_mult[4] __initconst = { 42, 48, 56, 64 };
+
+/* -----------------------------------------------------------------------------
+ * Initialization
+ */
+
+static u32 cpg_mode __initdata;
+
+static struct clk * __init
+r8a7779_cpg_register_clock(struct device_node *np, struct r8a7779_cpg *cpg,
+			   const struct cpg_clk_config *config,
+			   unsigned int plla_mult, const char *name)
+{
+	const char *parent_name = "plla";
+	unsigned int mult = 1;
+	unsigned int div = 1;
+
+	if (!strcmp(name, "plla")) {
+		parent_name = of_clk_get_parent_name(np, 0);
+		mult = plla_mult;
+	} else if (!strcmp(name, "z")) {
+		div = config->z_div;
+		mult = config->z_mult;
+	} else if (!strcmp(name, "zs") || !strcmp(name, "s")) {
+		div = config->zs_and_s_div;
+	} else if (!strcmp(name, "s1")) {
+		div = config->s1_div;
+	} else if (!strcmp(name, "p")) {
+		div = config->p_div;
+	} else if (!strcmp(name, "b") || !strcmp(name, "out")) {
+		div = config->b_and_out_div;
+	} else {
+		return ERR_PTR(-EINVAL);
+	}
+
+	return clk_register_fixed_factor(NULL, name, parent_name, 0, mult, div);
+}
+
+static void __init r8a7779_cpg_clocks_init(struct device_node *np)
+{
+	const struct cpg_clk_config *config;
+	struct r8a7779_cpg *cpg;
+	struct clk **clks;
+	unsigned int i, plla_mult;
+	int num_clks;
+
+	num_clks = of_property_count_strings(np, "clock-output-names");
+	if (num_clks < 0) {
+		pr_err("%s: failed to count clocks\n", __func__);
+		return;
+	}
+
+	cpg = kzalloc(sizeof(*cpg), GFP_KERNEL);
+	clks = kzalloc(CPG_NUM_CLOCKS * sizeof(*clks), GFP_KERNEL);
+	if (cpg == NULL || clks == NULL) {
+		/* We're leaking memory on purpose, there's no point in cleaning
+		 * up as the system won't boot anyway.
+		 */
+		return;
+	}
+
+	spin_lock_init(&cpg->lock);
+
+	cpg->data.clks = clks;
+	cpg->data.clk_num = num_clks;
+
+	config = &cpg_clk_configs[CPG_CLK_CONFIG_INDEX(cpg_mode)];
+	plla_mult = cpg_plla_mult[CPG_PLLA_MULT_INDEX(cpg_mode)];
+
+	for (i = 0; i < num_clks; ++i) {
+		const char *name;
+		struct clk *clk;
+
+		of_property_read_string_index(np, "clock-output-names", i,
+					      &name);
+
+		clk = r8a7779_cpg_register_clock(np, cpg, config,
+						 plla_mult, name);
+		if (IS_ERR(clk))
+			pr_err("%s: failed to register %s %s clock (%ld)\n",
+			       __func__, np->name, name, PTR_ERR(clk));
+		else
+			cpg->data.clks[i] = clk;
+	}
+
+	of_clk_add_provider(np, of_clk_src_onecell_get, &cpg->data);
+}
+CLK_OF_DECLARE(r8a7779_cpg_clks, "renesas,r8a7779-cpg-clocks",
+	       r8a7779_cpg_clocks_init);
+
+void __init r8a7779_clocks_init(u32 mode)
+{
+	cpg_mode = mode;
+
+	of_clk_init(NULL);
+}
diff --git a/include/linux/clk/shmobile.h b/include/linux/clk/shmobile.h
index f9bf080a1123..9f8a14041dd5 100644
--- a/include/linux/clk/shmobile.h
+++ b/include/linux/clk/shmobile.h
@@ -1,7 +1,9 @@
 /*
  * Copyright 2013 Ideas On Board SPRL
+ * Copyright 2013, 2014 Horms Solutions Ltd.
  *
  * Contact: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ * Contact: Simon Horman <horms@verge.net.au>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -14,6 +16,7 @@
 
 #include <linux/types.h>
 
+void r8a7779_clocks_init(u32 mode);
 void rcar_gen2_clocks_init(u32 mode);
 
 #endif
-- 
cgit v1.2.3


From a97181adf1502128e2945b4fef2591249c565467 Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Mon, 12 May 2014 14:04:47 +0200
Subject: clk: sunxi: Fixup clk_sunxi_mmc_phase_control to take a clk rather
 then a hw_clk

__clk_get_hw is supposed to be used by clk providers, not clk consumers.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/sunxi/clk-sunxi.c | 3 ++-
 include/linux/clk/sunxi.h     | 2 +-
 2 files changed, 3 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
index 59f90401b900..4cc2b2a5aa75 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -510,11 +510,12 @@ CLK_OF_DECLARE(sun7i_a20_gmac, "allwinner,sun7i-a20-gmac-clk",
  * clk_sunxi_mmc_phase_control() - configures MMC clock phase control
  */
 
-void clk_sunxi_mmc_phase_control(struct clk_hw *hw, u8 sample, u8 output)
+void clk_sunxi_mmc_phase_control(struct clk *clk, u8 sample, u8 output)
 {
 	#define to_clk_composite(_hw) container_of(_hw, struct clk_composite, hw)
 	#define to_clk_factors(_hw) container_of(_hw, struct clk_factors, hw)
 
+	struct clk_hw *hw = __clk_get_hw(clk);
 	struct clk_composite *composite = to_clk_composite(hw);
 	struct clk_hw *rate_hw = composite->rate_hw;
 	struct clk_factors *factors = to_clk_factors(rate_hw);
diff --git a/include/linux/clk/sunxi.h b/include/linux/clk/sunxi.h
index 1ef5c899e458..aed28c4451d9 100644
--- a/include/linux/clk/sunxi.h
+++ b/include/linux/clk/sunxi.h
@@ -17,6 +17,6 @@
 
 #include <linux/clk.h>
 
-void clk_sunxi_mmc_phase_control(struct clk_hw *hw, u8 sample, u8 output);
+void clk_sunxi_mmc_phase_control(struct clk *clk, u8 sample, u8 output);
 
 #endif
-- 
cgit v1.2.3


From a218d7fa3f7dbc0d3a168f1ccd13b21313d85dab Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Thu, 8 May 2014 16:56:16 +0200
Subject: clk/versatile: export symbols for impd1

The impd1 code on mach-integrator can be a loadable module,
so we have to export icst_clk_register, integrator_impd1_clk_init
and integrator_impd1_clk_exit.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/versatile/clk-icst.c  | 1 +
 drivers/clk/versatile/clk-impd1.c | 2 ++
 2 files changed, 3 insertions(+)

(limited to 'drivers')

diff --git a/drivers/clk/versatile/clk-icst.c b/drivers/clk/versatile/clk-icst.c
index a820b0cfcf57..7f3868a227c8 100644
--- a/drivers/clk/versatile/clk-icst.c
+++ b/drivers/clk/versatile/clk-icst.c
@@ -160,3 +160,4 @@ struct clk *icst_clk_register(struct device *dev,
 
 	return clk;
 }
+EXPORT_SYMBOL_GPL(icst_clk_register);
diff --git a/drivers/clk/versatile/clk-impd1.c b/drivers/clk/versatile/clk-impd1.c
index 31b44f025f9e..264d8d59ce31 100644
--- a/drivers/clk/versatile/clk-impd1.c
+++ b/drivers/clk/versatile/clk-impd1.c
@@ -133,6 +133,7 @@ void integrator_impd1_clk_init(void __iomem *base, unsigned int id)
 	for (i = 0; i < ARRAY_SIZE(imc->clks); i++)
 		clkdev_add(imc->clks[i]);
 }
+EXPORT_SYMBOL_GPL(integrator_impd1_clk_init);
 
 void integrator_impd1_clk_exit(unsigned int id)
 {
@@ -155,3 +156,4 @@ void integrator_impd1_clk_exit(unsigned int id)
 	kfree(imc->vco2name);
 	kfree(imc->vco1name);
 }
+EXPORT_SYMBOL_GPL(integrator_impd1_clk_exit);
-- 
cgit v1.2.3


From d15998e0957abea410159333995cab27ec568fed Mon Sep 17 00:00:00 2001
From: Stephen Boyd <sboyd@codeaurora.org>
Date: Fri, 16 May 2014 10:05:14 -0700
Subject: clk: qcom: Fix msm8660 GCC probe

When consolidating the msm8660 GCC probe code I forgot to keep
around these temporary clock registrations. Put them back so the
clock tree is not entirely orphaned.

Fixes: 49fc825f0cc2 (clk: qcom: Consolidate common probe code)
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/qcom/gcc-msm8660.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

(limited to 'drivers')

diff --git a/drivers/clk/qcom/gcc-msm8660.c b/drivers/clk/qcom/gcc-msm8660.c
index 44bc6fa64d78..0c4b727ae429 100644
--- a/drivers/clk/qcom/gcc-msm8660.c
+++ b/drivers/clk/qcom/gcc-msm8660.c
@@ -2718,6 +2718,18 @@ MODULE_DEVICE_TABLE(of, gcc_msm8660_match_table);
 
 static int gcc_msm8660_probe(struct platform_device *pdev)
 {
+	struct clk *clk;
+	struct device *dev = &pdev->dev;
+
+	/* Temporary until RPM clocks supported */
+	clk = clk_register_fixed_rate(dev, "cxo", NULL, CLK_IS_ROOT, 19200000);
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	clk = clk_register_fixed_rate(dev, "pxo", NULL, CLK_IS_ROOT, 27000000);
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
 	return qcom_cc_probe(pdev, &gcc_msm8660_desc);
 }
 
-- 
cgit v1.2.3


From 44731f5db44087f54d4e1ed6a460c75552fadcf7 Mon Sep 17 00:00:00 2001
From: Michal Simek <michal.simek@xilinx.com>
Date: Thu, 3 Apr 2014 17:05:02 +0200
Subject: clk: si570: Fix email address specifiction

Just fix missing ">" in the email.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 drivers/clk/clk-si570.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/clk/clk-si570.c b/drivers/clk/clk-si570.c
index 4bbbe32585ec..fc167b3f8919 100644
--- a/drivers/clk/clk-si570.c
+++ b/drivers/clk/clk-si570.c
@@ -526,6 +526,6 @@ static struct i2c_driver si570_driver = {
 module_i2c_driver(si570_driver);
 
 MODULE_AUTHOR("Guenter Roeck <guenter.roeck@ericsson.com>");
-MODULE_AUTHOR("Soeren Brinkmann <soren.brinkmann@xilinx.com");
+MODULE_AUTHOR("Soeren Brinkmann <soren.brinkmann@xilinx.com>");
 MODULE_DESCRIPTION("Si570 driver");
 MODULE_LICENSE("GPL");
-- 
cgit v1.2.3


From 222cb1bf180e413e1816aaf4166e4f56e72201d8 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Tue, 15 Apr 2014 10:29:45 +0200
Subject: clk: impd1: add pclk clocks

The IM-PD1 PrimeCells all have pclk assignments though this clock
cannot be controlled, and we need to provide this as a dummy
clock for the PL061 GPIO driver to probe, so let's assign it to
all the cells on the board.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/versatile/clk-impd1.c | 36 +++++++++++++++++++++++++++++-------
 1 file changed, 29 insertions(+), 7 deletions(-)

(limited to 'drivers')

diff --git a/drivers/clk/versatile/clk-impd1.c b/drivers/clk/versatile/clk-impd1.c
index 264d8d59ce31..1cc1330dc570 100644
--- a/drivers/clk/versatile/clk-impd1.c
+++ b/drivers/clk/versatile/clk-impd1.c
@@ -20,6 +20,8 @@
 #define IMPD1_LOCK	0x08
 
 struct impd1_clk {
+	char *pclkname;
+	struct clk *pclk;
 	char *vco1name;
 	struct clk *vco1clk;
 	char *vco2name;
@@ -31,7 +33,7 @@ struct impd1_clk {
 	struct clk *spiclk;
 	char *scname;
 	struct clk *scclk;
-	struct clk_lookup *clks[6];
+	struct clk_lookup *clks[15];
 };
 
 /* One entry for each connected IM-PD1 LM */
@@ -86,6 +88,7 @@ void integrator_impd1_clk_init(void __iomem *base, unsigned int id)
 {
 	struct impd1_clk *imc;
 	struct clk *clk;
+	struct clk *pclk;
 	int i;
 
 	if (id > 3) {
@@ -94,11 +97,18 @@ void integrator_impd1_clk_init(void __iomem *base, unsigned int id)
 	}
 	imc = &impd1_clks[id];
 
+	/* Register the fixed rate PCLK */
+	imc->pclkname = kasprintf(GFP_KERNEL, "lm%x-pclk", id);
+	pclk = clk_register_fixed_rate(NULL, imc->pclkname, NULL,
+				      CLK_IS_ROOT, 0);
+	imc->pclk = pclk;
+
 	imc->vco1name = kasprintf(GFP_KERNEL, "lm%x-vco1", id);
 	clk = icst_clk_register(NULL, &impd1_icst1_desc, imc->vco1name, NULL,
 				base);
 	imc->vco1clk = clk;
-	imc->clks[0] = clkdev_alloc(clk, NULL, "lm%x:01000", id);
+	imc->clks[0] = clkdev_alloc(pclk, "apb_pclk", "lm%x:01000", id);
+	imc->clks[1] = clkdev_alloc(clk, NULL, "lm%x:01000", id);
 
 	/* VCO2 is also called "CLK2" */
 	imc->vco2name = kasprintf(GFP_KERNEL, "lm%x-vco2", id);
@@ -107,28 +117,38 @@ void integrator_impd1_clk_init(void __iomem *base, unsigned int id)
 	imc->vco2clk = clk;
 
 	/* MMCI uses CLK2 right off */
-	imc->clks[1] = clkdev_alloc(clk, NULL, "lm%x:00700", id);
+	imc->clks[2] = clkdev_alloc(pclk, "apb_pclk", "lm%x:00700", id);
+	imc->clks[3] = clkdev_alloc(clk, NULL, "lm%x:00700", id);
 
 	/* UART reference clock divides CLK2 by a fixed factor 4 */
 	imc->uartname = kasprintf(GFP_KERNEL, "lm%x-uartclk", id);
 	clk = clk_register_fixed_factor(NULL, imc->uartname, imc->vco2name,
 				   CLK_IGNORE_UNUSED, 1, 4);
 	imc->uartclk = clk;
-	imc->clks[2] = clkdev_alloc(clk, NULL, "lm%x:00100", id);
-	imc->clks[3] = clkdev_alloc(clk, NULL, "lm%x:00200", id);
+	imc->clks[4] = clkdev_alloc(pclk, "apb_pclk", "lm%x:00100", id);
+	imc->clks[5] = clkdev_alloc(clk, NULL, "lm%x:00100", id);
+	imc->clks[6] = clkdev_alloc(pclk, "apb_pclk", "lm%x:00200", id);
+	imc->clks[7] = clkdev_alloc(clk, NULL, "lm%x:00200", id);
 
 	/* SPI PL022 clock divides CLK2 by a fixed factor 64 */
 	imc->spiname = kasprintf(GFP_KERNEL, "lm%x-spiclk", id);
 	clk = clk_register_fixed_factor(NULL, imc->spiname, imc->vco2name,
 				   CLK_IGNORE_UNUSED, 1, 64);
-	imc->clks[4] = clkdev_alloc(clk, NULL, "lm%x:00300", id);
+	imc->clks[8] = clkdev_alloc(pclk, "apb_pclk", "lm%x:00300", id);
+	imc->clks[9] = clkdev_alloc(clk, NULL, "lm%x:00300", id);
+
+	/* The GPIO blocks and AACI have only PCLK */
+	imc->clks[10] = clkdev_alloc(pclk, "apb_pclk", "lm%x:00400", id);
+	imc->clks[11] = clkdev_alloc(pclk, "apb_pclk", "lm%x:00500", id);
+	imc->clks[12] = clkdev_alloc(pclk, "apb_pclk", "lm%x:00800", id);
 
 	/* Smart Card clock divides CLK2 by a fixed factor 4 */
 	imc->scname = kasprintf(GFP_KERNEL, "lm%x-scclk", id);
 	clk = clk_register_fixed_factor(NULL, imc->scname, imc->vco2name,
 				   CLK_IGNORE_UNUSED, 1, 4);
 	imc->scclk = clk;
-	imc->clks[5] = clkdev_alloc(clk, NULL, "lm%x:00600", id);
+	imc->clks[13] = clkdev_alloc(pclk, "apb_pclk", "lm%x:00600", id);
+	imc->clks[14] = clkdev_alloc(clk, NULL, "lm%x:00600", id);
 
 	for (i = 0; i < ARRAY_SIZE(imc->clks); i++)
 		clkdev_add(imc->clks[i]);
@@ -150,10 +170,12 @@ void integrator_impd1_clk_exit(unsigned int id)
 	clk_unregister(imc->uartclk);
 	clk_unregister(imc->vco2clk);
 	clk_unregister(imc->vco1clk);
+	clk_unregister(imc->pclk);
 	kfree(imc->scname);
 	kfree(imc->spiname);
 	kfree(imc->uartname);
 	kfree(imc->vco2name);
 	kfree(imc->vco1name);
+	kfree(imc->pclkname);
 }
 EXPORT_SYMBOL_GPL(integrator_impd1_clk_exit);
-- 
cgit v1.2.3


From 7f05e28f9dd3eb7a3f27c6f50b715995dc7a88c5 Mon Sep 17 00:00:00 2001
From: Sylwester Nawrocki <s.nawrocki@samsung.com>
Date: Mon, 19 May 2014 19:22:50 +0200
Subject: clk: Add of_clk_get_by_clkspec() helper

This patch adds of_clk_get_by_clkspec() helper function, which does only
a struct clk lookup from the clock providers. It is used in the subsequent
patch where parsing of a clock from device tree and the lookup from
providers needed to be split.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/clk.h    |  1 +
 drivers/clk/clkdev.c | 34 +++++++++++++++++++++++++++-------
 2 files changed, 28 insertions(+), 7 deletions(-)

(limited to 'drivers')

diff --git a/drivers/clk/clk.h b/drivers/clk/clk.h
index 795cc9f0dac0..c798138f023f 100644
--- a/drivers/clk/clk.h
+++ b/drivers/clk/clk.h
@@ -10,6 +10,7 @@
  */
 
 #if defined(CONFIG_OF) && defined(CONFIG_COMMON_CLK)
+struct clk *of_clk_get_by_clkspec(struct of_phandle_args *clkspec);
 struct clk *__of_clk_get_from_provider(struct of_phandle_args *clkspec);
 void of_clk_lock(void);
 void of_clk_unlock(void);
diff --git a/drivers/clk/clkdev.c b/drivers/clk/clkdev.c
index a360b2eca5cb..f890b901c6bc 100644
--- a/drivers/clk/clkdev.c
+++ b/drivers/clk/clkdev.c
@@ -27,6 +27,32 @@ static LIST_HEAD(clocks);
 static DEFINE_MUTEX(clocks_mutex);
 
 #if defined(CONFIG_OF) && defined(CONFIG_COMMON_CLK)
+
+/**
+ * of_clk_get_by_clkspec() - Lookup a clock form a clock provider
+ * @clkspec: pointer to a clock specifier data structure
+ *
+ * This function looks up a struct clk from the registered list of clock
+ * providers, an input is a clock specifier data structure as returned
+ * from the of_parse_phandle_with_args() function call.
+ */
+struct clk *of_clk_get_by_clkspec(struct of_phandle_args *clkspec)
+{
+	struct clk *clk;
+
+	if (!clkspec)
+		return ERR_PTR(-EINVAL);
+
+	of_clk_lock();
+	clk = __of_clk_get_from_provider(clkspec);
+
+	if (!IS_ERR(clk) && !__clk_get(clk))
+		clk = ERR_PTR(-ENOENT);
+
+	of_clk_unlock();
+	return clk;
+}
+
 struct clk *of_clk_get(struct device_node *np, int index)
 {
 	struct of_phandle_args clkspec;
@@ -41,13 +67,7 @@ struct clk *of_clk_get(struct device_node *np, int index)
 	if (rc)
 		return ERR_PTR(rc);
 
-	of_clk_lock();
-	clk = __of_clk_get_from_provider(&clkspec);
-
-	if (!IS_ERR(clk) && !__clk_get(clk))
-		clk = ERR_PTR(-ENOENT);
-
-	of_clk_unlock();
+	clk = of_clk_get_by_clkspec(&clkspec);
 	of_node_put(clkspec.np);
 	return clk;
 }
-- 
cgit v1.2.3


From bb178da701382a230e26d90cf94e8a24b280e0d9 Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Date: Thu, 22 May 2014 20:02:14 +0200
Subject: clk: shmobile: mstp: Fix the is_enabled() operation

The MSTP[SC]R registers have clock stop bits, not clock enable bits. The
bit value should thus be inverted in the is_enabled() operation.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/shmobile/clk-mstp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/clk/shmobile/clk-mstp.c b/drivers/clk/shmobile/clk-mstp.c
index 1f6324e29a80..2d2fe773ac81 100644
--- a/drivers/clk/shmobile/clk-mstp.c
+++ b/drivers/clk/shmobile/clk-mstp.c
@@ -112,7 +112,7 @@ static int cpg_mstp_clock_is_enabled(struct clk_hw *hw)
 	else
 		value = clk_readl(group->smstpcr);
 
-	return !!(value & BIT(clock->bit_index));
+	return !(value & BIT(clock->bit_index));
 }
 
 static const struct clk_ops cpg_mstp_clock_ops = {
-- 
cgit v1.2.3


From c675a00c2d666c8e90da335eafbbae81201d53f7 Mon Sep 17 00:00:00 2001
From: Anders Berg <anders.berg@lsi.com>
Date: Thu, 15 May 2014 15:42:25 +0200
Subject: clk: Add clock driver for AXM55xx SoC

Add clk driver to support clock blocks found on the AXM55xx devices. The driver
provides clock implementations for three different types of clock devices on
the AXM55xx device: PLL clock, a clock divider and a clock mux.

Signed-off-by: Anders Berg <anders.berg@lsi.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 .../devicetree/bindings/clock/lsi,axm5516-clks.txt |  29 +
 drivers/clk/Makefile                               |   1 +
 drivers/clk/clk-axm5516.c                          | 615 +++++++++++++++++++++
 3 files changed, 645 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/lsi,axm5516-clks.txt
 create mode 100644 drivers/clk/clk-axm5516.c

(limited to 'drivers')

diff --git a/Documentation/devicetree/bindings/clock/lsi,axm5516-clks.txt b/Documentation/devicetree/bindings/clock/lsi,axm5516-clks.txt
new file mode 100644
index 000000000000..3ce97cfe999b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/lsi,axm5516-clks.txt
@@ -0,0 +1,29 @@
+AXM5516 clock driver bindings
+-----------------------------
+
+Required properties :
+- compatible : shall contain "lsi,axm5516-clks"
+- reg : shall contain base register location and length
+- #clock-cells : shall contain 1
+
+The consumer specifies the desired clock by having the clock ID in its "clocks"
+phandle cell. See <dt-bindings/clock/lsi,axxia-clock.h> for the list of
+supported clock IDs.
+
+Example:
+
+	clks: clock-controller@2010020000 {
+		compatible = "lsi,axm5516-clks";
+		#clock-cells = <1>;
+		reg = <0x20 0x10020000 0 0x20000>;
+	};
+
+	serial0: uart@2010080000 {
+		compatible = "arm,pl011", "arm,primecell";
+		reg = <0x20 0x10080000 0 0x1000>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clks AXXIA_CLK_PER>;
+		clock-names = "apb_pclk";
+	};
+																																};
+
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 3e6e577c01db..f30357aa5471 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_COMMON_CLK)	+= clk-composite.o
 # hardware specific clock types
 # please keep this section sorted lexicographically by file/directory path name
 obj-$(CONFIG_COMMON_CLK_AXI_CLKGEN)	+= clk-axi-clkgen.o
+obj-$(CONFIG_ARCH_AXXIA)		+= clk-axm5516.o
 obj-$(CONFIG_ARCH_BCM2835)		+= clk-bcm2835.o
 obj-$(CONFIG_ARCH_EFM32)		+= clk-efm32gg.o
 obj-$(CONFIG_ARCH_HIGHBANK)		+= clk-highbank.o
diff --git a/drivers/clk/clk-axm5516.c b/drivers/clk/clk-axm5516.c
new file mode 100644
index 000000000000..d2f1e119b450
--- /dev/null
+++ b/drivers/clk/clk-axm5516.c
@@ -0,0 +1,615 @@
+/*
+ * drivers/clk/clk-axm5516.c
+ *
+ * Provides clock implementations for three different types of clock devices on
+ * the Axxia device: PLL clock, a clock divider and a clock mux.
+ *
+ * Copyright (C) 2014 LSI Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk-provider.h>
+#include <linux/regmap.h>
+#include <dt-bindings/clock/lsi,axm5516-clks.h>
+
+
+/**
+ * struct axxia_clk - Common struct to all Axxia clocks.
+ * @hw: clk_hw for the common clk framework
+ * @regmap: Regmap for the clock control registers
+ */
+struct axxia_clk {
+	struct clk_hw hw;
+	struct regmap *regmap;
+};
+#define to_axxia_clk(_hw) container_of(_hw, struct axxia_clk, hw)
+
+/**
+ * struct axxia_pllclk - Axxia PLL generated clock.
+ * @aclk: Common struct
+ * @reg: Offset into regmap for PLL control register
+ */
+struct axxia_pllclk {
+	struct axxia_clk aclk;
+	u32 reg;
+};
+#define to_axxia_pllclk(_aclk) container_of(_aclk, struct axxia_pllclk, aclk)
+
+/**
+ * axxia_pllclk_recalc - Calculate the PLL generated clock rate given the
+ * parent clock rate.
+ */
+static unsigned long
+axxia_pllclk_recalc(struct clk_hw *hw, unsigned long parent_rate)
+{
+	struct axxia_clk *aclk = to_axxia_clk(hw);
+	struct axxia_pllclk *pll = to_axxia_pllclk(aclk);
+	unsigned long rate, fbdiv, refdiv, postdiv;
+	u32 control;
+
+	regmap_read(aclk->regmap, pll->reg, &control);
+	postdiv = ((control >> 0) & 0xf) + 1;
+	fbdiv   = ((control >> 4) & 0xfff) + 3;
+	refdiv  = ((control >> 16) & 0x1f) + 1;
+	rate = (parent_rate / (refdiv * postdiv)) * fbdiv;
+
+	return rate;
+}
+
+static const struct clk_ops axxia_pllclk_ops = {
+	.recalc_rate = axxia_pllclk_recalc,
+};
+
+/**
+ * struct axxia_divclk - Axxia clock divider
+ * @aclk: Common struct
+ * @reg: Offset into regmap for PLL control register
+ * @shift: Bit position for divider value
+ * @width: Number of bits in divider value
+ */
+struct axxia_divclk {
+	struct axxia_clk aclk;
+	u32 reg;
+	u32 shift;
+	u32 width;
+};
+#define to_axxia_divclk(_aclk) container_of(_aclk, struct axxia_divclk, aclk)
+
+/**
+ * axxia_divclk_recalc_rate - Calculate clock divider output rage
+ */
+static unsigned long
+axxia_divclk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
+{
+	struct axxia_clk *aclk = to_axxia_clk(hw);
+	struct axxia_divclk *divclk = to_axxia_divclk(aclk);
+	u32 ctrl, div;
+
+	regmap_read(aclk->regmap, divclk->reg, &ctrl);
+	div = 1 + ((ctrl >> divclk->shift) & ((1 << divclk->width)-1));
+
+	return parent_rate / div;
+}
+
+static const struct clk_ops axxia_divclk_ops = {
+	.recalc_rate = axxia_divclk_recalc_rate,
+};
+
+/**
+ * struct axxia_clkmux - Axxia clock mux
+ * @aclk: Common struct
+ * @reg: Offset into regmap for PLL control register
+ * @shift: Bit position for selection value
+ * @width: Number of bits in selection value
+ */
+struct axxia_clkmux {
+	struct axxia_clk aclk;
+	u32 reg;
+	u32 shift;
+	u32 width;
+};
+#define to_axxia_clkmux(_aclk) container_of(_aclk, struct axxia_clkmux, aclk)
+
+/**
+ * axxia_clkmux_get_parent - Return the index of selected parent clock
+ */
+static u8 axxia_clkmux_get_parent(struct clk_hw *hw)
+{
+	struct axxia_clk *aclk = to_axxia_clk(hw);
+	struct axxia_clkmux *mux = to_axxia_clkmux(aclk);
+	u32 ctrl, parent;
+
+	regmap_read(aclk->regmap, mux->reg, &ctrl);
+	parent = (ctrl >> mux->shift) & ((1 << mux->width) - 1);
+
+	return (u8) parent;
+}
+
+static const struct clk_ops axxia_clkmux_ops = {
+	.get_parent = axxia_clkmux_get_parent,
+};
+
+
+/*
+ * PLLs
+ */
+
+static struct axxia_pllclk clk_fab_pll = {
+	.aclk.hw.init = &(struct clk_init_data){
+		.name = "clk_fab_pll",
+		.parent_names = (const char *[]){
+			"clk_ref0"
+		},
+		.num_parents = 1,
+		.ops = &axxia_pllclk_ops,
+	},
+	.reg   = 0x01800,
+};
+
+static struct axxia_pllclk clk_cpu_pll = {
+	.aclk.hw.init = &(struct clk_init_data){
+		.name = "clk_cpu_pll",
+		.parent_names = (const char *[]){
+			"clk_ref0"
+		},
+		.num_parents = 1,
+		.ops = &axxia_pllclk_ops,
+	},
+	.reg   = 0x02000,
+};
+
+static struct axxia_pllclk clk_sys_pll = {
+	.aclk.hw.init = &(struct clk_init_data){
+		.name = "clk_sys_pll",
+		.parent_names = (const char *[]){
+			"clk_ref0"
+		},
+		.num_parents = 1,
+		.ops = &axxia_pllclk_ops,
+	},
+	.reg   = 0x02800,
+};
+
+static struct axxia_pllclk clk_sm0_pll = {
+	.aclk.hw.init = &(struct clk_init_data){
+		.name = "clk_sm0_pll",
+		.parent_names = (const char *[]){
+			"clk_ref2"
+		},
+		.num_parents = 1,
+		.ops = &axxia_pllclk_ops,
+	},
+	.reg   = 0x03000,
+};
+
+static struct axxia_pllclk clk_sm1_pll = {
+	.aclk.hw.init = &(struct clk_init_data){
+		.name = "clk_sm1_pll",
+		.parent_names = (const char *[]){
+			"clk_ref1"
+		},
+		.num_parents = 1,
+		.ops = &axxia_pllclk_ops,
+	},
+	.reg   = 0x03800,
+};
+
+/*
+ * Clock dividers
+ */
+
+static struct axxia_divclk clk_cpu0_div = {
+	.aclk.hw.init = &(struct clk_init_data){
+		.name = "clk_cpu0_div",
+		.parent_names = (const char *[]){
+			"clk_cpu_pll"
+		},
+		.num_parents = 1,
+		.ops = &axxia_divclk_ops,
+	},
+	.reg   = 0x10008,
+	.shift = 0,
+	.width = 4,
+};
+
+static struct axxia_divclk clk_cpu1_div = {
+	.aclk.hw.init = &(struct clk_init_data){
+		.name = "clk_cpu1_div",
+		.parent_names = (const char *[]){
+			"clk_cpu_pll"
+		},
+		.num_parents = 1,
+		.ops = &axxia_divclk_ops,
+	},
+	.reg   = 0x10008,
+	.shift = 4,
+	.width = 4,
+};
+
+static struct axxia_divclk clk_cpu2_div = {
+	.aclk.hw.init = &(struct clk_init_data){
+		.name = "clk_cpu2_div",
+		.parent_names = (const char *[]){
+			"clk_cpu_pll"
+		},
+		.num_parents = 1,
+		.ops = &axxia_divclk_ops,
+	},
+	.reg   = 0x10008,
+	.shift = 8,
+	.width = 4,
+};
+
+static struct axxia_divclk clk_cpu3_div = {
+	.aclk.hw.init = &(struct clk_init_data){
+		.name = "clk_cpu3_div",
+		.parent_names = (const char *[]){
+			"clk_cpu_pll"
+		},
+		.num_parents = 1,
+		.ops = &axxia_divclk_ops,
+	},
+	.reg   = 0x10008,
+	.shift = 12,
+	.width = 4,
+};
+
+static struct axxia_divclk clk_nrcp_div = {
+	.aclk.hw.init = &(struct clk_init_data){
+		.name = "clk_nrcp_div",
+		.parent_names = (const char *[]){
+			"clk_sys_pll"
+		},
+		.num_parents = 1,
+		.ops = &axxia_divclk_ops,
+	},
+	.reg   = 0x1000c,
+	.shift = 0,
+	.width = 4,
+};
+
+static struct axxia_divclk clk_sys_div = {
+	.aclk.hw.init = &(struct clk_init_data){
+		.name = "clk_sys_div",
+		.parent_names = (const char *[]){
+			"clk_sys_pll"
+		},
+		.num_parents = 1,
+		.ops = &axxia_divclk_ops,
+	},
+	.reg   = 0x1000c,
+	.shift = 4,
+	.width = 4,
+};
+
+static struct axxia_divclk clk_fab_div = {
+	.aclk.hw.init = &(struct clk_init_data){
+		.name = "clk_fab_div",
+		.parent_names = (const char *[]){
+			"clk_fab_pll"
+		},
+		.num_parents = 1,
+		.ops = &axxia_divclk_ops,
+	},
+	.reg   = 0x1000c,
+	.shift = 8,
+	.width = 4,
+};
+
+static struct axxia_divclk clk_per_div = {
+	.aclk.hw.init = &(struct clk_init_data){
+		.name = "clk_per_div",
+		.parent_names = (const char *[]){
+			"clk_sm1_pll"
+		},
+		.num_parents = 1,
+		.flags = CLK_IS_BASIC,
+		.ops = &axxia_divclk_ops,
+	},
+	.reg   = 0x1000c,
+	.shift = 12,
+	.width = 4,
+};
+
+static struct axxia_divclk clk_mmc_div = {
+	.aclk.hw.init = &(struct clk_init_data){
+		.name = "clk_mmc_div",
+		.parent_names = (const char *[]){
+			"clk_sm1_pll"
+		},
+		.num_parents = 1,
+		.flags = CLK_IS_BASIC,
+		.ops = &axxia_divclk_ops,
+	},
+	.reg   = 0x1000c,
+	.shift = 16,
+	.width = 4,
+};
+
+/*
+ * Clock MUXes
+ */
+
+static struct axxia_clkmux clk_cpu0_mux = {
+	.aclk.hw.init = &(struct clk_init_data){
+		.name = "clk_cpu0",
+		.parent_names = (const char *[]){
+			"clk_ref0",
+			"clk_cpu_pll",
+			"clk_cpu0_div",
+			"clk_cpu0_div"
+		},
+		.num_parents = 4,
+		.ops = &axxia_clkmux_ops,
+	},
+	.reg   = 0x10000,
+	.shift = 0,
+	.width = 2,
+};
+
+static struct axxia_clkmux clk_cpu1_mux = {
+	.aclk.hw.init = &(struct clk_init_data){
+		.name = "clk_cpu1",
+		.parent_names = (const char *[]){
+			"clk_ref0",
+			"clk_cpu_pll",
+			"clk_cpu1_div",
+			"clk_cpu1_div"
+		},
+		.num_parents = 4,
+		.ops = &axxia_clkmux_ops,
+	},
+	.reg   = 0x10000,
+	.shift = 2,
+	.width = 2,
+};
+
+static struct axxia_clkmux clk_cpu2_mux = {
+	.aclk.hw.init = &(struct clk_init_data){
+		.name = "clk_cpu2",
+		.parent_names = (const char *[]){
+			"clk_ref0",
+			"clk_cpu_pll",
+			"clk_cpu2_div",
+			"clk_cpu2_div"
+		},
+		.num_parents = 4,
+		.ops = &axxia_clkmux_ops,
+	},
+	.reg   = 0x10000,
+	.shift = 4,
+	.width = 2,
+};
+
+static struct axxia_clkmux clk_cpu3_mux = {
+	.aclk.hw.init = &(struct clk_init_data){
+		.name = "clk_cpu3",
+		.parent_names = (const char *[]){
+			"clk_ref0",
+			"clk_cpu_pll",
+			"clk_cpu3_div",
+			"clk_cpu3_div"
+		},
+		.num_parents = 4,
+		.ops = &axxia_clkmux_ops,
+	},
+	.reg   = 0x10000,
+	.shift = 6,
+	.width = 2,
+};
+
+static struct axxia_clkmux clk_nrcp_mux = {
+	.aclk.hw.init = &(struct clk_init_data){
+		.name = "clk_nrcp",
+		.parent_names = (const char *[]){
+			"clk_ref0",
+			"clk_sys_pll",
+			"clk_nrcp_div",
+			"clk_nrcp_div"
+		},
+		.num_parents = 4,
+		.ops = &axxia_clkmux_ops,
+	},
+	.reg   = 0x10004,
+	.shift = 0,
+	.width = 2,
+};
+
+static struct axxia_clkmux clk_sys_mux = {
+	.aclk.hw.init = &(struct clk_init_data){
+		.name = "clk_sys",
+		.parent_names = (const char *[]){
+			"clk_ref0",
+			"clk_sys_pll",
+			"clk_sys_div",
+			"clk_sys_div"
+		},
+		.num_parents = 4,
+		.ops = &axxia_clkmux_ops,
+	},
+	.reg   = 0x10004,
+	.shift = 2,
+	.width = 2,
+};
+
+static struct axxia_clkmux clk_fab_mux = {
+	.aclk.hw.init = &(struct clk_init_data){
+		.name = "clk_fab",
+		.parent_names = (const char *[]){
+			"clk_ref0",
+			"clk_fab_pll",
+			"clk_fab_div",
+			"clk_fab_div"
+		},
+		.num_parents = 4,
+		.ops = &axxia_clkmux_ops,
+	},
+	.reg   = 0x10004,
+	.shift = 4,
+	.width = 2,
+};
+
+static struct axxia_clkmux clk_per_mux = {
+	.aclk.hw.init = &(struct clk_init_data){
+		.name = "clk_per",
+		.parent_names = (const char *[]){
+			"clk_ref1",
+			"clk_per_div"
+		},
+		.num_parents = 2,
+		.ops = &axxia_clkmux_ops,
+	},
+	.reg   = 0x10004,
+	.shift = 6,
+	.width = 1,
+};
+
+static struct axxia_clkmux clk_mmc_mux = {
+	.aclk.hw.init = &(struct clk_init_data){
+		.name = "clk_mmc",
+		.parent_names = (const char *[]){
+			"clk_ref1",
+			"clk_mmc_div"
+		},
+		.num_parents = 2,
+		.ops = &axxia_clkmux_ops,
+	},
+	.reg   = 0x10004,
+	.shift = 9,
+	.width = 1,
+};
+
+/* Table of all supported clocks indexed by the clock identifiers from the
+ * device tree binding
+ */
+static struct axxia_clk *axmclk_clocks[] = {
+	[AXXIA_CLK_FAB_PLL]  = &clk_fab_pll.aclk,
+	[AXXIA_CLK_CPU_PLL]  = &clk_cpu_pll.aclk,
+	[AXXIA_CLK_SYS_PLL]  = &clk_sys_pll.aclk,
+	[AXXIA_CLK_SM0_PLL]  = &clk_sm0_pll.aclk,
+	[AXXIA_CLK_SM1_PLL]  = &clk_sm1_pll.aclk,
+	[AXXIA_CLK_FAB_DIV]  = &clk_fab_div.aclk,
+	[AXXIA_CLK_SYS_DIV]  = &clk_sys_div.aclk,
+	[AXXIA_CLK_NRCP_DIV] = &clk_nrcp_div.aclk,
+	[AXXIA_CLK_CPU0_DIV] = &clk_cpu0_div.aclk,
+	[AXXIA_CLK_CPU1_DIV] = &clk_cpu1_div.aclk,
+	[AXXIA_CLK_CPU2_DIV] = &clk_cpu2_div.aclk,
+	[AXXIA_CLK_CPU3_DIV] = &clk_cpu3_div.aclk,
+	[AXXIA_CLK_PER_DIV]  = &clk_per_div.aclk,
+	[AXXIA_CLK_MMC_DIV]  = &clk_mmc_div.aclk,
+	[AXXIA_CLK_FAB]      = &clk_fab_mux.aclk,
+	[AXXIA_CLK_SYS]      = &clk_sys_mux.aclk,
+	[AXXIA_CLK_NRCP]     = &clk_nrcp_mux.aclk,
+	[AXXIA_CLK_CPU0]     = &clk_cpu0_mux.aclk,
+	[AXXIA_CLK_CPU1]     = &clk_cpu1_mux.aclk,
+	[AXXIA_CLK_CPU2]     = &clk_cpu2_mux.aclk,
+	[AXXIA_CLK_CPU3]     = &clk_cpu3_mux.aclk,
+	[AXXIA_CLK_PER]      = &clk_per_mux.aclk,
+	[AXXIA_CLK_MMC]      = &clk_mmc_mux.aclk,
+};
+
+static const struct regmap_config axmclk_regmap_config = {
+	.reg_bits	= 32,
+	.reg_stride	= 4,
+	.val_bits	= 32,
+	.max_register	= 0x1fffc,
+	.fast_io	= true,
+};
+
+static const struct of_device_id axmclk_match_table[] = {
+	{ .compatible = "lsi,axm5516-clks" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, axmclk_match_table);
+
+struct axmclk_priv {
+	struct clk_onecell_data onecell;
+	struct clk *clks[];
+};
+
+static int axmclk_probe(struct platform_device *pdev)
+{
+	void __iomem *base;
+	struct resource *res;
+	int i, ret;
+	struct device *dev = &pdev->dev;
+	struct clk *clk;
+	struct regmap *regmap;
+	size_t num_clks;
+	struct axmclk_priv *priv;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	regmap = devm_regmap_init_mmio(dev, base, &axmclk_regmap_config);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	num_clks = ARRAY_SIZE(axmclk_clocks);
+	pr_info("axmclk: supporting %u clocks\n", num_clks);
+	priv = devm_kzalloc(dev, sizeof(*priv) + sizeof(*priv->clks) * num_clks,
+			    GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->onecell.clks = priv->clks;
+	priv->onecell.clk_num = num_clks;
+
+	/* Update each entry with the allocated regmap and register the clock
+	 * with the common clock framework
+	 */
+	for (i = 0; i < num_clks; i++) {
+		axmclk_clocks[i]->regmap = regmap;
+		clk = devm_clk_register(dev, &axmclk_clocks[i]->hw);
+		if (IS_ERR(clk))
+			return PTR_ERR(clk);
+		priv->clks[i] = clk;
+	}
+
+	ret = of_clk_add_provider(dev->of_node,
+				  of_clk_src_onecell_get, &priv->onecell);
+
+	return ret;
+}
+
+static int axmclk_remove(struct platform_device *pdev)
+{
+	of_clk_del_provider(pdev->dev.of_node);
+	return 0;
+}
+
+static struct platform_driver axmclk_driver = {
+	.probe		= axmclk_probe,
+	.remove		= axmclk_remove,
+	.driver		= {
+		.name	= "clk-axm5516",
+		.owner	= THIS_MODULE,
+		.of_match_table = axmclk_match_table,
+	},
+};
+
+static int __init axmclk_init(void)
+{
+	return platform_driver_register(&axmclk_driver);
+}
+core_initcall(axmclk_init);
+
+static void __exit axmclk_exit(void)
+{
+	platform_driver_unregister(&axmclk_driver);
+}
+module_exit(axmclk_exit);
+
+MODULE_DESCRIPTION("AXM5516 clock driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:clk-axm5516");
-- 
cgit v1.2.3


From 2cfe16748bec853cb6b83d19546dfd226898b222 Mon Sep 17 00:00:00 2001
From: Jim Lin <jilin@nvidia.com>
Date: Wed, 14 May 2014 17:32:57 -0700
Subject: clk: tegra: Enable hardware control of PLLE

Enable hardware control of PLLE spread-spectrum, IDDQ, and enable
controls when enabling PLLE.  The hardware (e.g. XUSB) using PLLE
will use these controls for power-saving optimizations.

Signed-off-by: Jim Lin <jilin@nvidia.com>
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/tegra/clk-pll.c | 33 ++++++++++++++++++++++++++++++++-
 1 file changed, 32 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c
index e1769addf435..39e0959b61bd 100644
--- a/drivers/clk/tegra/clk-pll.c
+++ b/drivers/clk/tegra/clk-pll.c
@@ -96,10 +96,20 @@
 	(PLLE_SS_MAX_VAL | PLLE_SS_INC_VAL | PLLE_SS_INCINTRV_VAL)
 
 #define PLLE_AUX_PLLP_SEL	BIT(2)
+#define PLLE_AUX_USE_LOCKDET	BIT(3)
 #define PLLE_AUX_ENABLE_SWCTL	BIT(4)
+#define PLLE_AUX_SS_SWCTL	BIT(6)
 #define PLLE_AUX_SEQ_ENABLE	BIT(24)
+#define PLLE_AUX_SEQ_START_STATE BIT(25)
 #define PLLE_AUX_PLLRE_SEL	BIT(28)
 
+#define XUSBIO_PLL_CFG0		0x51c
+#define XUSBIO_PLL_CFG0_PADPLL_RESET_SWCTL	BIT(0)
+#define XUSBIO_PLL_CFG0_CLK_ENABLE_SWCTL	BIT(2)
+#define XUSBIO_PLL_CFG0_PADPLL_USE_LOCKDET	BIT(6)
+#define XUSBIO_PLL_CFG0_SEQ_ENABLE		BIT(24)
+#define XUSBIO_PLL_CFG0_SEQ_START_STATE		BIT(25)
+
 #define PLLE_MISC_PLLE_PTS	BIT(8)
 #define PLLE_MISC_IDDQ_SW_VALUE	BIT(13)
 #define PLLE_MISC_IDDQ_SW_CTRL	BIT(14)
@@ -1318,7 +1328,28 @@ static int clk_plle_tegra114_enable(struct clk_hw *hw)
 	pll_writel(val, PLLE_SS_CTRL, pll);
 	udelay(1);
 
-	/* TODO: enable hw control of xusb brick pll */
+	/* Enable hw control of xusb brick pll */
+	val = pll_readl_misc(pll);
+	val &= ~PLLE_MISC_IDDQ_SW_CTRL;
+	pll_writel_misc(val, pll);
+
+	val = pll_readl(pll->params->aux_reg, pll);
+	val |= (PLLE_AUX_USE_LOCKDET | PLLE_AUX_SEQ_START_STATE);
+	val &= ~(PLLE_AUX_ENABLE_SWCTL | PLLE_AUX_SS_SWCTL);
+	pll_writel(val, pll->params->aux_reg, pll);
+	udelay(1);
+	val |= PLLE_AUX_SEQ_ENABLE;
+	pll_writel(val, pll->params->aux_reg, pll);
+
+	val = pll_readl(XUSBIO_PLL_CFG0, pll);
+	val |= (XUSBIO_PLL_CFG0_PADPLL_USE_LOCKDET |
+		XUSBIO_PLL_CFG0_SEQ_START_STATE);
+	val &= ~(XUSBIO_PLL_CFG0_CLK_ENABLE_SWCTL |
+		 XUSBIO_PLL_CFG0_PADPLL_RESET_SWCTL);
+	pll_writel(val, XUSBIO_PLL_CFG0, pll);
+	udelay(1);
+	val |= XUSBIO_PLL_CFG0_SEQ_ENABLE;
+	pll_writel(val, XUSBIO_PLL_CFG0, pll);
 
 out:
 	if (pll->lock)
-- 
cgit v1.2.3


From 9d61707b1f83324fc30918787cb6ef101997ecbd Mon Sep 17 00:00:00 2001
From: Jim Lin <jilin@nvidia.com>
Date: Wed, 14 May 2014 17:32:58 -0700
Subject: clk: tegra: Fix xusb_fs_src mux

The parent-to-index mapping for xusb_fs_src is incorrect.
Fix it by adding a mux table.

Signed-off-by: Jim Lin <jilin@nvidia.com>
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/tegra/clk-tegra-periph.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/clk/tegra/clk-tegra-periph.c b/drivers/clk/tegra/clk-tegra-periph.c
index 1fa5c3f33b20..a4063bc25208 100644
--- a/drivers/clk/tegra/clk-tegra-periph.c
+++ b/drivers/clk/tegra/clk-tegra-periph.c
@@ -329,7 +329,9 @@ static u32 mux_clkm_pllp_pllc_pllre_idx[] = {
 static const char *mux_clkm_48M_pllp_480M[] = {
 	"clk_m", "pll_u_48M", "pll_p", "pll_u_480M"
 };
-#define mux_clkm_48M_pllp_480M_idx NULL
+static u32 mux_clkm_48M_pllp_480M_idx[] = {
+	[0] = 0, [1] = 2, [2] = 4, [3] = 6,
+};
 
 static const char *mux_clkm_pllre_clk32_480M_pllc_ref[] = {
 	"clk_m", "pll_re_out", "clk_32k", "pll_u_480M", "pll_c", "pll_ref"
-- 
cgit v1.2.3


From 5c992afcf8e4f91fac05d39b86c7f7922a50145c Mon Sep 17 00:00:00 2001
From: Andrew Bresticker <abrestic@chromium.org>
Date: Wed, 14 May 2014 17:32:59 -0700
Subject: clk: tegra: Fix xusb_hs_src clock hierarchy

Currently the Tegra1x4 clock init code hard-codes the mux setting
for xusb_hs_src and treats it as a fixed-factor clock.  It is,
however, a mux which can be parented by either xusb_ss_src/2 or
pll_u_60M.  Add the fixed-factor clock xusb_ss_div2 and put an
entry in periph_clks[] for the xusb_hs_src mux.

Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/tegra/clk-id.h               |  1 +
 drivers/clk/tegra/clk-tegra-periph.c     |  6 ++++++
 drivers/clk/tegra/clk-tegra114.c         | 15 +++++----------
 drivers/clk/tegra/clk-tegra124.c         | 15 +++++----------
 include/dt-bindings/clock/tegra114-car.h |  3 ++-
 include/dt-bindings/clock/tegra124-car.h |  3 ++-
 6 files changed, 21 insertions(+), 22 deletions(-)

(limited to 'drivers')

diff --git a/drivers/clk/tegra/clk-id.h b/drivers/clk/tegra/clk-id.h
index c39613c519af..0011d547a9f7 100644
--- a/drivers/clk/tegra/clk-id.h
+++ b/drivers/clk/tegra/clk-id.h
@@ -233,6 +233,7 @@ enum clk_id {
 	tegra_clk_xusb_hs_src,
 	tegra_clk_xusb_ss,
 	tegra_clk_xusb_ss_src,
+	tegra_clk_xusb_ss_div2,
 	tegra_clk_max,
 };
 
diff --git a/drivers/clk/tegra/clk-tegra-periph.c b/drivers/clk/tegra/clk-tegra-periph.c
index a4063bc25208..adf6b814b5bc 100644
--- a/drivers/clk/tegra/clk-tegra-periph.c
+++ b/drivers/clk/tegra/clk-tegra-periph.c
@@ -340,6 +340,11 @@ static u32 mux_clkm_pllre_clk32_480M_pllc_ref_idx[] = {
 	[0] = 0, [1] = 1, [2] = 3, [3] = 3, [4] = 4, [5] = 7,
 };
 
+static const char *mux_ss_60M[] = {
+	"xusb_ss_div2", "pll_u_60M"
+};
+#define mux_ss_60M_idx NULL
+
 static const char *mux_d_audio_clk[] = {
 	"pll_a_out0", "pll_p", "clk_m", "spdif_in_sync", "i2s0_sync",
 	"i2s1_sync", "i2s2_sync", "i2s3_sync", "i2s4_sync", "vimclk_sync",
@@ -501,6 +506,7 @@ static struct tegra_periph_init_data periph_clks[] = {
 	XUSB("xusb_falcon_src", mux_clkm_pllp_pllc_pllre, CLK_SOURCE_XUSB_FALCON_SRC, 143, TEGRA_PERIPH_NO_RESET, tegra_clk_xusb_falcon_src),
 	XUSB("xusb_fs_src", mux_clkm_48M_pllp_480M, CLK_SOURCE_XUSB_FS_SRC, 143, TEGRA_PERIPH_NO_RESET, tegra_clk_xusb_fs_src),
 	XUSB("xusb_ss_src", mux_clkm_pllre_clk32_480M_pllc_ref, CLK_SOURCE_XUSB_SS_SRC, 143, TEGRA_PERIPH_NO_RESET, tegra_clk_xusb_ss_src),
+	NODIV("xusb_hs_src", mux_ss_60M, CLK_SOURCE_XUSB_SS_SRC, 25, MASK(1), 143, TEGRA_PERIPH_NO_RESET, tegra_clk_xusb_hs_src, NULL),
 	XUSB("xusb_dev_src", mux_clkm_pllp_pllc_pllre, CLK_SOURCE_XUSB_DEV_SRC, 95, TEGRA_PERIPH_ON_APB | TEGRA_PERIPH_NO_RESET, tegra_clk_xusb_dev_src),
 };
 
diff --git a/drivers/clk/tegra/clk-tegra114.c b/drivers/clk/tegra/clk-tegra114.c
index 80431f0fb268..841f54fb8c8b 100644
--- a/drivers/clk/tegra/clk-tegra114.c
+++ b/drivers/clk/tegra/clk-tegra114.c
@@ -142,7 +142,6 @@
 #define UTMIPLL_HW_PWRDN_CFG0_IDDQ_SWCTL	BIT(0)
 
 #define CLK_SOURCE_CSITE 0x1d4
-#define CLK_SOURCE_XUSB_SS_SRC 0x610
 #define CLK_SOURCE_EMC 0x19c
 
 /* PLLM override registers */
@@ -834,6 +833,7 @@ static struct tegra_clk tegra114_clks[tegra_clk_max] __initdata = {
 	[tegra_clk_xusb_falcon_src] = { .dt_id = TEGRA114_CLK_XUSB_FALCON_SRC, .present = true },
 	[tegra_clk_xusb_fs_src] = { .dt_id = TEGRA114_CLK_XUSB_FS_SRC, .present = true },
 	[tegra_clk_xusb_ss_src] = { .dt_id = TEGRA114_CLK_XUSB_SS_SRC, .present = true },
+	[tegra_clk_xusb_ss_div2] = { .dt_id = TEGRA114_CLK_XUSB_SS_DIV2, .present = true},
 	[tegra_clk_xusb_dev_src] = { .dt_id = TEGRA114_CLK_XUSB_DEV_SRC, .present = true },
 	[tegra_clk_xusb_dev] = { .dt_id = TEGRA114_CLK_XUSB_DEV, .present = true },
 	[tegra_clk_xusb_hs_src] = { .dt_id = TEGRA114_CLK_XUSB_HS_SRC, .present = true },
@@ -1182,16 +1182,11 @@ static __init void tegra114_periph_clk_init(void __iomem *clk_base,
 					    void __iomem *pmc_base)
 {
 	struct clk *clk;
-	u32 val;
-
-	/* xusb_hs_src */
-	val = readl(clk_base + CLK_SOURCE_XUSB_SS_SRC);
-	val |= BIT(25); /* always select PLLU_60M */
-	writel(val, clk_base + CLK_SOURCE_XUSB_SS_SRC);
 
-	clk = clk_register_fixed_factor(NULL, "xusb_hs_src", "pll_u_60M", 0,
-					1, 1);
-	clks[TEGRA114_CLK_XUSB_HS_SRC] = clk;
+	/* xusb_ss_div2 */
+	clk = clk_register_fixed_factor(NULL, "xusb_ss_div2", "xusb_ss_src", 0,
+					1, 2);
+	clks[TEGRA114_CLK_XUSB_SS_DIV2] = clk;
 
 	/* dsia mux */
 	clk = clk_register_mux(NULL, "dsia_mux", mux_plld_out0_plld2_out0,
diff --git a/drivers/clk/tegra/clk-tegra124.c b/drivers/clk/tegra/clk-tegra124.c
index cc37c342c4cb..0dce8c08eb91 100644
--- a/drivers/clk/tegra/clk-tegra124.c
+++ b/drivers/clk/tegra/clk-tegra124.c
@@ -30,7 +30,6 @@
 
 #define CLK_SOURCE_CSITE 0x1d4
 #define CLK_SOURCE_EMC 0x19c
-#define CLK_SOURCE_XUSB_SS_SRC 0x610
 
 #define PLLC_BASE 0x80
 #define PLLC_OUT 0x84
@@ -925,6 +924,7 @@ static struct tegra_clk tegra124_clks[tegra_clk_max] __initdata = {
 	[tegra_clk_xusb_falcon_src] = { .dt_id = TEGRA124_CLK_XUSB_FALCON_SRC, .present = true },
 	[tegra_clk_xusb_fs_src] = { .dt_id = TEGRA124_CLK_XUSB_FS_SRC, .present = true },
 	[tegra_clk_xusb_ss_src] = { .dt_id = TEGRA124_CLK_XUSB_SS_SRC, .present = true },
+	[tegra_clk_xusb_ss_div2] = { .dt_id = TEGRA124_CLK_XUSB_SS_DIV2, .present = true },
 	[tegra_clk_xusb_dev_src] = { .dt_id = TEGRA124_CLK_XUSB_DEV_SRC, .present = true },
 	[tegra_clk_xusb_dev] = { .dt_id = TEGRA124_CLK_XUSB_DEV, .present = true },
 	[tegra_clk_xusb_hs_src] = { .dt_id = TEGRA124_CLK_XUSB_HS_SRC, .present = true },
@@ -1105,16 +1105,11 @@ static __init void tegra124_periph_clk_init(void __iomem *clk_base,
 					    void __iomem *pmc_base)
 {
 	struct clk *clk;
-	u32 val;
-
-	/* xusb_hs_src */
-	val = readl(clk_base + CLK_SOURCE_XUSB_SS_SRC);
-	val |= BIT(25); /* always select PLLU_60M */
-	writel(val, clk_base + CLK_SOURCE_XUSB_SS_SRC);
 
-	clk = clk_register_fixed_factor(NULL, "xusb_hs_src", "pll_u_60M", 0,
-					1, 1);
-	clks[TEGRA124_CLK_XUSB_HS_SRC] = clk;
+	/* xusb_ss_div2 */
+	clk = clk_register_fixed_factor(NULL, "xusb_ss_div2", "xusb_ss_src", 0,
+					1, 2);
+	clks[TEGRA124_CLK_XUSB_SS_DIV2] = clk;
 
 	/* dsia mux */
 	clk = clk_register_mux(NULL, "dsia_mux", mux_plld_out0_plld2_out0,
diff --git a/include/dt-bindings/clock/tegra114-car.h b/include/dt-bindings/clock/tegra114-car.h
index 6d0d8d8ef31e..fc12621fb432 100644
--- a/include/dt-bindings/clock/tegra114-car.h
+++ b/include/dt-bindings/clock/tegra114-car.h
@@ -337,6 +337,7 @@
 #define TEGRA114_CLK_CLK_OUT_3_MUX 308
 #define TEGRA114_CLK_DSIA_MUX 309
 #define TEGRA114_CLK_DSIB_MUX 310
-#define TEGRA114_CLK_CLK_MAX 311
+#define TEGRA114_CLK_XUSB_SS_DIV2 311
+#define TEGRA114_CLK_CLK_MAX 312
 
 #endif	/* _DT_BINDINGS_CLOCK_TEGRA114_CAR_H */
diff --git a/include/dt-bindings/clock/tegra124-car.h b/include/dt-bindings/clock/tegra124-car.h
index 433528ab5161..8a4c5892890f 100644
--- a/include/dt-bindings/clock/tegra124-car.h
+++ b/include/dt-bindings/clock/tegra124-car.h
@@ -336,6 +336,7 @@
 #define TEGRA124_CLK_DSIA_MUX 309
 #define TEGRA124_CLK_DSIB_MUX 310
 #define TEGRA124_CLK_SOR0_LVDS 311
-#define TEGRA124_CLK_CLK_MAX 312
+#define TEGRA124_CLK_XUSB_SS_DIV2 312
+#define TEGRA124_CLK_CLK_MAX 313
 
 #endif	/* _DT_BINDINGS_CLOCK_TEGRA124_CAR_H */
-- 
cgit v1.2.3


From 4a7f10d67b7a015036823856d6669b1f75362ba0 Mon Sep 17 00:00:00 2001
From: Andrew Bresticker <abrestic@chromium.org>
Date: Wed, 14 May 2014 17:33:00 -0700
Subject: clk: tegra: Initialize xusb clocks

Initialize the XUSB-related clocks with appropriate parents and rates
for both Tegra114 and Tegra124.

Signed-off-by: Jim Lin <jilin@nvidia.com>
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/tegra/clk-tegra114.c | 7 ++++++-
 drivers/clk/tegra/clk-tegra124.c | 6 ++++++
 2 files changed, 12 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/clk/tegra/clk-tegra114.c b/drivers/clk/tegra/clk-tegra114.c
index 841f54fb8c8b..b9c8ba258ef0 100644
--- a/drivers/clk/tegra/clk-tegra114.c
+++ b/drivers/clk/tegra/clk-tegra114.c
@@ -1296,7 +1296,12 @@ static struct tegra_clk_init_table init_table[] __initdata = {
 	{TEGRA114_CLK_GR3D, TEGRA114_CLK_PLL_C2, 300000000, 0},
 	{TEGRA114_CLK_DSIALP, TEGRA114_CLK_PLL_P, 68000000, 0},
 	{TEGRA114_CLK_DSIBLP, TEGRA114_CLK_PLL_P, 68000000, 0},
-
+	{TEGRA114_CLK_PLL_RE_VCO, TEGRA114_CLK_CLK_MAX, 612000000, 0},
+	{TEGRA114_CLK_XUSB_SS_SRC, TEGRA114_CLK_PLL_RE_OUT, 122400000, 0},
+	{TEGRA114_CLK_XUSB_FS_SRC, TEGRA114_CLK_PLL_U_48M, 48000000, 0},
+	{TEGRA114_CLK_XUSB_HS_SRC, TEGRA114_CLK_XUSB_SS_DIV2, 61200000, 0},
+	{TEGRA114_CLK_XUSB_FALCON_SRC, TEGRA114_CLK_PLL_P, 204000000, 0},
+	{TEGRA114_CLK_XUSB_HOST_SRC, TEGRA114_CLK_PLL_P, 102000000, 0},
 	/* This MUST be the last entry. */
 	{TEGRA114_CLK_CLK_MAX, TEGRA114_CLK_CLK_MAX, 0, 0},
 };
diff --git a/drivers/clk/tegra/clk-tegra124.c b/drivers/clk/tegra/clk-tegra124.c
index 0dce8c08eb91..80efe51fdcdf 100644
--- a/drivers/clk/tegra/clk-tegra124.c
+++ b/drivers/clk/tegra/clk-tegra124.c
@@ -1363,6 +1363,12 @@ static struct tegra_clk_init_table init_table[] __initdata = {
 	{TEGRA124_CLK_SBC4, TEGRA124_CLK_PLL_P, 12000000, 1},
 	{TEGRA124_CLK_TSEC, TEGRA124_CLK_PLL_C3, 0, 0},
 	{TEGRA124_CLK_MSENC, TEGRA124_CLK_PLL_C3, 0, 0},
+	{TEGRA124_CLK_PLL_RE_VCO, TEGRA124_CLK_CLK_MAX, 672000000, 0},
+	{TEGRA124_CLK_XUSB_SS_SRC, TEGRA124_CLK_PLL_U_480M, 120000000, 0},
+	{TEGRA124_CLK_XUSB_FS_SRC, TEGRA124_CLK_PLL_U_48M, 48000000, 0},
+	{TEGRA124_CLK_XUSB_HS_SRC, TEGRA124_CLK_PLL_U_60M, 60000000, 0},
+	{TEGRA124_CLK_XUSB_FALCON_SRC, TEGRA124_CLK_PLL_RE_OUT, 224000000, 0},
+	{TEGRA124_CLK_XUSB_HOST_SRC, TEGRA124_CLK_PLL_RE_OUT, 112000000, 0},
 	/* This MUST be the last entry. */
 	{TEGRA124_CLK_CLK_MAX, TEGRA124_CLK_CLK_MAX, 0, 0},
 };
-- 
cgit v1.2.3


From 1923ca92a618b6107d3a44b5c9f9360b104dcddb Mon Sep 17 00:00:00 2001
From: Ulrich Hecht <ulrich.hecht@gmail.com>
Date: Fri, 23 May 2014 15:27:15 +0200
Subject: clk: shmobile: Add R8A7740-specific clock support

Driver for the R8A7740's clocks that are too specific to be supported by a
generic driver.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 .../bindings/clock/renesas,r8a7740-cpg-clocks.txt  |  41 +++++
 drivers/clk/shmobile/Makefile                      |   1 +
 drivers/clk/shmobile/clk-r8a7740.c                 | 199 +++++++++++++++++++++
 3 files changed, 241 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/renesas,r8a7740-cpg-clocks.txt
 create mode 100644 drivers/clk/shmobile/clk-r8a7740.c

(limited to 'drivers')

diff --git a/Documentation/devicetree/bindings/clock/renesas,r8a7740-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,r8a7740-cpg-clocks.txt
new file mode 100644
index 000000000000..2c03302f86ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,r8a7740-cpg-clocks.txt
@@ -0,0 +1,41 @@
+These bindings should be considered EXPERIMENTAL for now.
+
+* Renesas R8A7740  Clock Pulse Generator (CPG)
+
+The CPG generates core clocks for the R8A7740 SoC. It includes three PLLs
+and several fixed ratio and variable ratio dividers.
+
+Required Properties:
+
+  - compatible: Must be "renesas,r8a7740-cpg-clocks"
+
+  - reg: Base address and length of the memory resource used by the CPG
+
+  - clocks: Reference to the three parent clocks
+  - #clock-cells: Must be 1
+  - clock-output-names: The names of the clocks. Supported clocks are
+    "system", "pllc0", "pllc1", "pllc2", "r", "usb24s", "i", "zg", "b",
+    "m1", "hp", "hpp", "usbp", "s", "zb", "m3", and "cp".
+
+  - renesas,mode: board-specific settings of the MD_CK* bits
+
+
+Example
+-------
+
+cpg_clocks: cpg_clocks@e6150000 {
+        compatible = "renesas,r8a7740-cpg-clocks";
+        reg = <0xe6150000 0x10000>;
+        clocks = <&extal1_clk>, <&extal2_clk>, <&extalr_clk>;
+        #clock-cells = <1>;
+        clock-output-names = "system", "pllc0", "pllc1",
+                             "pllc2", "r",
+                             "usb24s",
+                             "i", "zg", "b", "m1", "hp",
+                             "hpp", "usbp", "s", "zb", "m3",
+                             "cp";
+};
+
+&cpg_clocks {
+	renesas,mode = <0x05>;
+};
diff --git a/drivers/clk/shmobile/Makefile b/drivers/clk/shmobile/Makefile
index bdf342daefa5..e0029237827a 100644
--- a/drivers/clk/shmobile/Makefile
+++ b/drivers/clk/shmobile/Makefile
@@ -1,5 +1,6 @@
 obj-$(CONFIG_ARCH_EMEV2)		+= clk-emev2.o
 obj-$(CONFIG_ARCH_R7S72100)		+= clk-rz.o
+obj-$(CONFIG_ARCH_R8A7740)		+= clk-r8a7740.o
 obj-$(CONFIG_ARCH_R8A7779)		+= clk-r8a7779.o
 obj-$(CONFIG_ARCH_R8A7790)		+= clk-rcar-gen2.o
 obj-$(CONFIG_ARCH_R8A7791)		+= clk-rcar-gen2.o
diff --git a/drivers/clk/shmobile/clk-r8a7740.c b/drivers/clk/shmobile/clk-r8a7740.c
new file mode 100644
index 000000000000..1e2eaae21e01
--- /dev/null
+++ b/drivers/clk/shmobile/clk-r8a7740.c
@@ -0,0 +1,199 @@
+/*
+ * r8a7740 Core CPG Clocks
+ *
+ * Copyright (C) 2014  Ulrich Hecht
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk/shmobile.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/spinlock.h>
+
+struct r8a7740_cpg {
+	struct clk_onecell_data data;
+	spinlock_t lock;
+	void __iomem *reg;
+};
+
+#define CPG_FRQCRA	0x00
+#define CPG_FRQCRB	0x04
+#define CPG_PLLC2CR	0x2c
+#define CPG_USBCKCR	0x8c
+#define CPG_FRQCRC	0xe0
+
+#define CLK_ENABLE_ON_INIT BIT(0)
+
+struct div4_clk {
+	const char *name;
+	unsigned int reg;
+	unsigned int shift;
+	int flags;
+};
+
+static struct div4_clk div4_clks[] = {
+	{ "i", CPG_FRQCRA, 20, CLK_ENABLE_ON_INIT },
+	{ "zg", CPG_FRQCRA, 16, CLK_ENABLE_ON_INIT },
+	{ "b", CPG_FRQCRA,  8, CLK_ENABLE_ON_INIT },
+	{ "m1", CPG_FRQCRA,  4, CLK_ENABLE_ON_INIT },
+	{ "hp", CPG_FRQCRB,  4, 0 },
+	{ "hpp", CPG_FRQCRC, 20, 0 },
+	{ "usbp", CPG_FRQCRC, 16, 0 },
+	{ "s", CPG_FRQCRC, 12, 0 },
+	{ "zb", CPG_FRQCRC,  8, 0 },
+	{ "m3", CPG_FRQCRC,  4, 0 },
+	{ "cp", CPG_FRQCRC,  0, 0 },
+	{ NULL, 0, 0, 0 },
+};
+
+static const struct clk_div_table div4_div_table[] = {
+	{ 0, 2 }, { 1, 3 }, { 2, 4 }, { 3, 6 }, { 4, 8 }, { 5, 12 },
+	{ 6, 16 }, { 7, 18 }, { 8, 24 }, { 9, 32 }, { 10, 36 }, { 11, 48 },
+	{ 13, 72 }, { 14, 96 }, { 0, 0 }
+};
+
+static u32 cpg_mode __initdata;
+
+static struct clk * __init
+r8a7740_cpg_register_clock(struct device_node *np, struct r8a7740_cpg *cpg,
+			     const char *name)
+{
+	const struct clk_div_table *table = NULL;
+	const char *parent_name;
+	unsigned int shift, reg;
+	unsigned int mult = 1;
+	unsigned int div = 1;
+
+	if (!strcmp(name, "r")) {
+		switch (cpg_mode & (BIT(2) | BIT(1))) {
+		case BIT(1) | BIT(2):
+			/* extal1 */
+			parent_name = of_clk_get_parent_name(np, 0);
+			div = 2048;
+			break;
+		case BIT(2):
+			/* extal1 */
+			parent_name = of_clk_get_parent_name(np, 0);
+			div = 1024;
+			break;
+		default:
+			/* extalr */
+			parent_name = of_clk_get_parent_name(np, 2);
+			break;
+		}
+	} else if (!strcmp(name, "system")) {
+		parent_name = of_clk_get_parent_name(np, 0);
+		if (cpg_mode & BIT(1))
+			div = 2;
+	} else if (!strcmp(name, "pllc0")) {
+		/* PLLC0/1 are configurable multiplier clocks. Register them as
+		 * fixed factor clocks for now as there's no generic multiplier
+		 * clock implementation and we currently have no need to change
+		 * the multiplier value.
+		 */
+		u32 value = clk_readl(cpg->reg + CPG_FRQCRC);
+		parent_name = "system";
+		mult = ((value >> 24) & 0x7f) + 1;
+	} else if (!strcmp(name, "pllc1")) {
+		u32 value = clk_readl(cpg->reg + CPG_FRQCRA);
+		parent_name = "system";
+		mult = ((value >> 24) & 0x7f) + 1;
+		div = 2;
+	} else if (!strcmp(name, "pllc2")) {
+		u32 value = clk_readl(cpg->reg + CPG_PLLC2CR);
+		parent_name = "system";
+		mult = ((value >> 24) & 0x3f) + 1;
+	} else if (!strcmp(name, "usb24s")) {
+		u32 value = clk_readl(cpg->reg + CPG_USBCKCR);
+		if (value & BIT(7))
+			/* extal2 */
+			parent_name = of_clk_get_parent_name(np, 1);
+		else
+			parent_name = "system";
+		if (!(value & BIT(6)))
+			div = 2;
+	} else {
+		struct div4_clk *c;
+		for (c = div4_clks; c->name; c++) {
+			if (!strcmp(name, c->name)) {
+				parent_name = "pllc1";
+				table = div4_div_table;
+				reg = c->reg;
+				shift = c->shift;
+				break;
+			}
+		}
+		if (!c->name)
+			return ERR_PTR(-EINVAL);
+	}
+
+	if (!table) {
+		return clk_register_fixed_factor(NULL, name, parent_name, 0,
+						 mult, div);
+	} else {
+		return clk_register_divider_table(NULL, name, parent_name, 0,
+						  cpg->reg + reg, shift, 4, 0,
+						  table, &cpg->lock);
+	}
+}
+
+static void __init r8a7740_cpg_clocks_init(struct device_node *np)
+{
+	struct r8a7740_cpg *cpg;
+	struct clk **clks;
+	unsigned int i;
+	int num_clks;
+
+	if (of_property_read_u32(np, "renesas,mode", &cpg_mode))
+		pr_warn("%s: missing renesas,mode property\n", __func__);
+
+	num_clks = of_property_count_strings(np, "clock-output-names");
+	if (num_clks < 0) {
+		pr_err("%s: failed to count clocks\n", __func__);
+		return;
+	}
+
+	cpg = kzalloc(sizeof(*cpg), GFP_KERNEL);
+	clks = kzalloc(num_clks * sizeof(*clks), GFP_KERNEL);
+	if (cpg == NULL || clks == NULL) {
+		/* We're leaking memory on purpose, there's no point in cleaning
+		 * up as the system won't boot anyway.
+		 */
+		return;
+	}
+
+	spin_lock_init(&cpg->lock);
+
+	cpg->data.clks = clks;
+	cpg->data.clk_num = num_clks;
+
+	cpg->reg = of_iomap(np, 0);
+	if (WARN_ON(cpg->reg == NULL))
+		return;
+
+	for (i = 0; i < num_clks; ++i) {
+		const char *name;
+		struct clk *clk;
+
+		of_property_read_string_index(np, "clock-output-names", i,
+					      &name);
+
+		clk = r8a7740_cpg_register_clock(np, cpg, name);
+		if (IS_ERR(clk))
+			pr_err("%s: failed to register %s %s clock (%ld)\n",
+			       __func__, np->name, name, PTR_ERR(clk));
+		else
+			cpg->data.clks[i] = clk;
+	}
+
+	of_clk_add_provider(np, of_clk_src_onecell_get, &cpg->data);
+}
+CLK_OF_DECLARE(r8a7740_cpg_clks, "renesas,r8a7740-cpg-clocks",
+	       r8a7740_cpg_clocks_init);
-- 
cgit v1.2.3


From 79c6ab509558f9871175c7e4411f857de12cf33b Mon Sep 17 00:00:00 2001
From: Heiko Stuebner <heiko@sntech.de>
Date: Fri, 23 May 2014 18:32:15 +0530
Subject: clk: divider: add CLK_DIVIDER_READ_ONLY flag

From: Heiko Stuebner <heiko@sntech.de>

Similar to muxes which already have a read-only flag there sometimes
exist dividers which should not be changed by the clock framework
but whose value still should be readable.

Therefore add a READ_ONLY flag similar to the mux-one to clk-divider

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[changed flag bit to BIT(5) as suggested by Tomasz Figa]
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Acked-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Max Schwarz <max.schwarz@online.de>
Tested-by: Max Schwarz <max.schwarz@online.de>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/clk-divider.c    | 10 +++++++++-
 include/linux/clk-provider.h |  4 ++++
 2 files changed, 13 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
index b3c83966be18..c9343f5d9918 100644
--- a/drivers/clk/clk-divider.c
+++ b/drivers/clk/clk-divider.c
@@ -361,6 +361,11 @@ const struct clk_ops clk_divider_ops = {
 };
 EXPORT_SYMBOL_GPL(clk_divider_ops);
 
+const struct clk_ops clk_divider_ro_ops = {
+	.recalc_rate = clk_divider_recalc_rate,
+};
+EXPORT_SYMBOL_GPL(clk_divider_ro_ops);
+
 static struct clk *_register_divider(struct device *dev, const char *name,
 		const char *parent_name, unsigned long flags,
 		void __iomem *reg, u8 shift, u8 width,
@@ -386,7 +391,10 @@ static struct clk *_register_divider(struct device *dev, const char *name,
 	}
 
 	init.name = name;
-	init.ops = &clk_divider_ops;
+	if (clk_divider_flags & CLK_DIVIDER_READ_ONLY)
+		init.ops = &clk_divider_ro_ops;
+	else
+		init.ops = &clk_divider_ops;
 	init.flags = flags | CLK_IS_BASIC;
 	init.parent_names = (parent_name ? &parent_name: NULL);
 	init.num_parents = (parent_name ? 1 : 0);
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 40809431641e..c7135dbbcd65 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -320,6 +320,8 @@ struct clk_div_table {
  *	updated to indicate changing divider bits.
  * CLK_DIVIDER_ROUND_CLOSEST - Makes the best calculated divider to be rounded
  *	to the closest integer instead of the up one.
+ * CLK_DIVIDER_READ_ONLY - The divider settings are preconfigured and should
+ *	not be changed by the clock framework.
  */
 struct clk_divider {
 	struct clk_hw	hw;
@@ -336,8 +338,10 @@ struct clk_divider {
 #define CLK_DIVIDER_ALLOW_ZERO		BIT(2)
 #define CLK_DIVIDER_HIWORD_MASK		BIT(3)
 #define CLK_DIVIDER_ROUND_CLOSEST	BIT(4)
+#define CLK_DIVIDER_READ_ONLY		BIT(5)
 
 extern const struct clk_ops clk_divider_ops;
+extern const struct clk_ops clk_divider_ro_ops;
 struct clk *clk_register_divider(struct device *dev, const char *name,
 		const char *parent_name, unsigned long flags,
 		void __iomem *reg, u8 shift, u8 width,
-- 
cgit v1.2.3


From fb8abb7aefe8454e3b478ef11da78ea25b891ad4 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert+renesas@glider.be>
Date: Tue, 25 Mar 2014 12:16:24 +0100
Subject: clk: Neaten clk_summary output

  - Limit ruler to 80 characters (was: 81),
  - Widen rate column by 1 for nicer spacing,
  - Right-align numbers and their column headers,
  - Move a newline to reduce the number of seq_printf() calls,
  - Use set_puts() for fixed strings.

Before:

   clock                        enable_cnt  prepare_cnt  rate        accuracy
---------------------------------------------------------------------------------
 extal                          2           2            20000000   0
    thermal                     1           1            20000000   0
    cp                          0           0            10000000   0
       tpu0                     0           0            10000000   0
       tmu0                     0           0            10000000   0
    main                        1           1            20000000   0
       pll3                     0           0            1600000000 0
          ddr                   0           0            200000000  0
          zb3d2                 0           0            200000000  0
          zb3                   0           0            400000000  0
       pll1                     4           4            1560000000 0
          oscclk                0           0            126953     0
          rclk                  1           1            31738      0
             cmt1               0           0            31738      0
             cmt0               1           1            31738      0
          imp                   0           0            390000000  0

After:

   clock                         enable_cnt  prepare_cnt        rate   accuracy
--------------------------------------------------------------------------------
 extal                                    2            2    20000000          0
    thermal                               1            1    20000000          0
    cp                                    0            0    10000000          0
       tpu0                               0            0    10000000          0
       tmu0                               0            0    10000000          0
    main                                  1            1    20000000          0
       pll3                               0            0  1600000000          0
          ddr                             0            0   200000000          0
          zb3d2                           0            0   200000000          0
          zb3                             0            0   400000000          0
       pll1                               4            4  1560000000          0
          oscclk                          0            0      126953          0
          rclk                            1            1       31738          0
             cmt1                         0            0       31738          0
             cmt0                         1            1       31738          0
          imp                             0            0   390000000          0

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/clk.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

(limited to 'drivers')

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 4d562206d62f..2df2b26297ce 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -106,12 +106,11 @@ static void clk_summary_show_one(struct seq_file *s, struct clk *c, int level)
 	if (!c)
 		return;
 
-	seq_printf(s, "%*s%-*s %-11d %-12d %-10lu %-11lu",
+	seq_printf(s, "%*s%-*s %11d %12d %11lu %10lu\n",
 		   level * 3 + 1, "",
 		   30 - level * 3, c->name,
 		   c->enable_count, c->prepare_count, clk_get_rate(c),
 		   clk_get_accuracy(c));
-	seq_printf(s, "\n");
 }
 
 static void clk_summary_show_subtree(struct seq_file *s, struct clk *c,
@@ -132,8 +131,8 @@ static int clk_summary_show(struct seq_file *s, void *data)
 {
 	struct clk *c;
 
-	seq_printf(s, "   clock                        enable_cnt  prepare_cnt  rate        accuracy\n");
-	seq_printf(s, "---------------------------------------------------------------------------------\n");
+	seq_puts(s, "   clock                         enable_cnt  prepare_cnt        rate   accuracy\n");
+	seq_puts(s, "--------------------------------------------------------------------------------\n");
 
 	clk_prepare_lock();
 
-- 
cgit v1.2.3


From bf416bd457389bfe7371ba9074bcbd032d7a04cc Mon Sep 17 00:00:00 2001
From: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Date: Wed, 21 May 2014 13:22:59 +0200
Subject: clk: s2mps11: Add missing of_node_put and of_clk_del_provider

Add of_clk_del_provider to remove previously registered clock provider.
Add of_node_put to decrement the ref count of clock nodes.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/clk-s2mps11.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

(limited to 'drivers')

diff --git a/drivers/clk/clk-s2mps11.c b/drivers/clk/clk-s2mps11.c
index f2f62a1bf61a..843ec3646501 100644
--- a/drivers/clk/clk-s2mps11.c
+++ b/drivers/clk/clk-s2mps11.c
@@ -44,6 +44,7 @@ enum {
 
 struct s2mps11_clk {
 	struct sec_pmic_dev *iodev;
+	struct device_node *clk_np;
 	struct clk_hw hw;
 	struct clk *clk;
 	struct clk_lookup *lookup;
@@ -156,7 +157,6 @@ static int s2mps11_clk_probe(struct platform_device *pdev)
 {
 	struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
 	struct s2mps11_clk *s2mps11_clks, *s2mps11_clk;
-	struct device_node *clk_np = NULL;
 	unsigned int s2mps11_reg;
 	int i, ret = 0;
 	u32 val;
@@ -168,9 +168,10 @@ static int s2mps11_clk_probe(struct platform_device *pdev)
 
 	s2mps11_clk = s2mps11_clks;
 
-	clk_np = s2mps11_clk_parse_dt(pdev);
-	if (IS_ERR(clk_np))
-		return PTR_ERR(clk_np);
+	/* Store clocks of_node in first element of s2mps11_clks array */
+	s2mps11_clks->clk_np = s2mps11_clk_parse_dt(pdev);
+	if (IS_ERR(s2mps11_clks->clk_np))
+		return PTR_ERR(s2mps11_clks->clk_np);
 
 	switch(platform_get_device_id(pdev)->driver_data) {
 	case S2MPS11X:
@@ -225,7 +226,8 @@ static int s2mps11_clk_probe(struct platform_device *pdev)
 
 		clk_data.clks = clk_table;
 		clk_data.clk_num = S2MPS11_CLKS_NUM;
-		of_clk_add_provider(clk_np, of_clk_src_onecell_get, &clk_data);
+		of_clk_add_provider(s2mps11_clks->clk_np,
+				of_clk_src_onecell_get, &clk_data);
 	}
 
 	platform_set_drvdata(pdev, s2mps11_clks);
@@ -250,6 +252,10 @@ static int s2mps11_clk_remove(struct platform_device *pdev)
 	struct s2mps11_clk *s2mps11_clks = platform_get_drvdata(pdev);
 	int i;
 
+	of_clk_del_provider(s2mps11_clks[0].clk_np);
+	/* Drop the reference obtained in s2mps11_clk_parse_dt */
+	of_node_put(s2mps11_clks[0].clk_np);
+
 	for (i = 0; i < S2MPS11_CLKS_NUM; i++)
 		clkdev_drop(s2mps11_clks[i].lookup);
 
-- 
cgit v1.2.3


From 7002483c7b28a808d2bd4366b00c48911688c768 Mon Sep 17 00:00:00 2001
From: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Date: Wed, 21 May 2014 13:23:00 +0200
Subject: clk: s2mps11: Remove useless check for clk_table

There is no need for checking if 'clk_table' is not NULL twice (first
after allocation and second at the end of probe()). Also move allocation
of this 'clk_table' to probe from s2mps11_clk_parse_dt as this is
logical place for it.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/clk-s2mps11.c | 24 +++++++++++-------------
 1 file changed, 11 insertions(+), 13 deletions(-)

(limited to 'drivers')

diff --git a/drivers/clk/clk-s2mps11.c b/drivers/clk/clk-s2mps11.c
index 843ec3646501..23ffd89c4023 100644
--- a/drivers/clk/clk-s2mps11.c
+++ b/drivers/clk/clk-s2mps11.c
@@ -141,11 +141,6 @@ static struct device_node *s2mps11_clk_parse_dt(struct platform_device *pdev)
 		return ERR_PTR(-EINVAL);
 	}
 
-	clk_table = devm_kzalloc(&pdev->dev, sizeof(struct clk *) *
-				 S2MPS11_CLKS_NUM, GFP_KERNEL);
-	if (!clk_table)
-		return ERR_PTR(-ENOMEM);
-
 	for (i = 0; i < S2MPS11_CLKS_NUM; i++)
 		of_property_read_string_index(clk_np, "clock-output-names", i,
 				&s2mps11_clks_init[i].name);
@@ -168,6 +163,11 @@ static int s2mps11_clk_probe(struct platform_device *pdev)
 
 	s2mps11_clk = s2mps11_clks;
 
+	clk_table = devm_kzalloc(&pdev->dev, sizeof(struct clk *) *
+				 S2MPS11_CLKS_NUM, GFP_KERNEL);
+	if (!clk_table)
+		return -ENOMEM;
+
 	/* Store clocks of_node in first element of s2mps11_clks array */
 	s2mps11_clks->clk_np = s2mps11_clk_parse_dt(pdev);
 	if (IS_ERR(s2mps11_clks->clk_np))
@@ -220,15 +220,13 @@ static int s2mps11_clk_probe(struct platform_device *pdev)
 		clkdev_add(s2mps11_clk->lookup);
 	}
 
-	if (clk_table) {
-		for (i = 0; i < S2MPS11_CLKS_NUM; i++)
-			clk_table[i] = s2mps11_clks[i].clk;
+	for (i = 0; i < S2MPS11_CLKS_NUM; i++)
+		clk_table[i] = s2mps11_clks[i].clk;
 
-		clk_data.clks = clk_table;
-		clk_data.clk_num = S2MPS11_CLKS_NUM;
-		of_clk_add_provider(s2mps11_clks->clk_np,
-				of_clk_src_onecell_get, &clk_data);
-	}
+	clk_data.clks = clk_table;
+	clk_data.clk_num = S2MPS11_CLKS_NUM;
+	of_clk_add_provider(s2mps11_clks->clk_np, of_clk_src_onecell_get,
+			&clk_data);
 
 	platform_set_drvdata(pdev, s2mps11_clks);
 
-- 
cgit v1.2.3


From e8b60a45a54738243d13aeba230af20a68619b1b Mon Sep 17 00:00:00 2001
From: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Date: Wed, 21 May 2014 13:23:01 +0200
Subject: clk: s2mps11: Add support for S2MPS14 clocks

This patch adds support for S2MPS14 PMIC clocks (BT and AP) to the
s2mps11 clock driver.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Yadwinder Singh Brar <yadi.brar@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/Kconfig       |  8 +++---
 drivers/clk/clk-s2mps11.c | 64 +++++++++++++++++++++++++++++++++++------------
 2 files changed, 52 insertions(+), 20 deletions(-)

(limited to 'drivers')

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 6f56d3a4f010..8f9ce8ba036d 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -65,12 +65,12 @@ config COMMON_CLK_SI570
 	  clock generators.
 
 config COMMON_CLK_S2MPS11
-	tristate "Clock driver for S2MPS11/S5M8767 MFD"
+	tristate "Clock driver for S2MPS1X/S5M8767 MFD"
 	depends on MFD_SEC_CORE
 	---help---
-	  This driver supports S2MPS11/S5M8767 crystal oscillator clock. These
-	  multi-function devices have 3 fixed-rate oscillators, clocked at
-	  32KHz each.
+	  This driver supports S2MPS11/S2MPS14/S5M8767 crystal oscillator
+	  clock. These multi-function devices have two (S2MPS14) or three
+	  (S2MPS11, S5M8767) fixed-rate oscillators, clocked at 32KHz each.
 
 config CLK_TWL6040
 	tristate "External McPDM functional clock from twl6040"
diff --git a/drivers/clk/clk-s2mps11.c b/drivers/clk/clk-s2mps11.c
index 23ffd89c4023..9b7b5859a420 100644
--- a/drivers/clk/clk-s2mps11.c
+++ b/drivers/clk/clk-s2mps11.c
@@ -1,7 +1,7 @@
 /*
  * clk-s2mps11.c - Clock driver for S2MPS11.
  *
- * Copyright (C) 2013 Samsung Electornics
+ * Copyright (C) 2013,2014 Samsung Electornics
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -13,10 +13,6 @@
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
  */
 
 #include <linux/module.h>
@@ -27,6 +23,7 @@
 #include <linux/clk-provider.h>
 #include <linux/platform_device.h>
 #include <linux/mfd/samsung/s2mps11.h>
+#include <linux/mfd/samsung/s2mps14.h>
 #include <linux/mfd/samsung/s5m8767.h>
 #include <linux/mfd/samsung/core.h>
 
@@ -126,7 +123,21 @@ static struct clk_init_data s2mps11_clks_init[S2MPS11_CLKS_NUM] = {
 	},
 };
 
-static struct device_node *s2mps11_clk_parse_dt(struct platform_device *pdev)
+static struct clk_init_data s2mps14_clks_init[S2MPS11_CLKS_NUM] = {
+	[S2MPS11_CLK_AP] = {
+		.name = "s2mps14_ap",
+		.ops = &s2mps11_clk_ops,
+		.flags = CLK_IS_ROOT,
+	},
+	[S2MPS11_CLK_BT] = {
+		.name = "s2mps14_bt",
+		.ops = &s2mps11_clk_ops,
+		.flags = CLK_IS_ROOT,
+	},
+};
+
+static struct device_node *s2mps11_clk_parse_dt(struct platform_device *pdev,
+		struct clk_init_data *clks_init)
 {
 	struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
 	struct device_node *clk_np;
@@ -141,9 +152,12 @@ static struct device_node *s2mps11_clk_parse_dt(struct platform_device *pdev)
 		return ERR_PTR(-EINVAL);
 	}
 
-	for (i = 0; i < S2MPS11_CLKS_NUM; i++)
+	for (i = 0; i < S2MPS11_CLKS_NUM; i++) {
+		if (!clks_init[i].name)
+			continue; /* Skip clocks not present in some devices */
 		of_property_read_string_index(clk_np, "clock-output-names", i,
-				&s2mps11_clks_init[i].name);
+				&clks_init[i].name);
+	}
 
 	return clk_np;
 }
@@ -153,6 +167,7 @@ static int s2mps11_clk_probe(struct platform_device *pdev)
 	struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
 	struct s2mps11_clk *s2mps11_clks, *s2mps11_clk;
 	unsigned int s2mps11_reg;
+	struct clk_init_data *clks_init;
 	int i, ret = 0;
 	u32 val;
 
@@ -168,26 +183,34 @@ static int s2mps11_clk_probe(struct platform_device *pdev)
 	if (!clk_table)
 		return -ENOMEM;
 
-	/* Store clocks of_node in first element of s2mps11_clks array */
-	s2mps11_clks->clk_np = s2mps11_clk_parse_dt(pdev);
-	if (IS_ERR(s2mps11_clks->clk_np))
-		return PTR_ERR(s2mps11_clks->clk_np);
-
 	switch(platform_get_device_id(pdev)->driver_data) {
 	case S2MPS11X:
 		s2mps11_reg = S2MPS11_REG_RTC_CTRL;
+		clks_init = s2mps11_clks_init;
+		break;
+	case S2MPS14X:
+		s2mps11_reg = S2MPS14_REG_RTCCTRL;
+		clks_init = s2mps14_clks_init;
 		break;
 	case S5M8767X:
 		s2mps11_reg = S5M8767_REG_CTRL1;
+		clks_init = s2mps11_clks_init;
 		break;
 	default:
 		dev_err(&pdev->dev, "Invalid device type\n");
 		return -EINVAL;
 	};
 
+	/* Store clocks of_node in first element of s2mps11_clks array */
+	s2mps11_clks->clk_np = s2mps11_clk_parse_dt(pdev, clks_init);
+	if (IS_ERR(s2mps11_clks->clk_np))
+		return PTR_ERR(s2mps11_clks->clk_np);
+
 	for (i = 0; i < S2MPS11_CLKS_NUM; i++, s2mps11_clk++) {
+		if (!clks_init[i].name)
+			continue; /* Skip clocks not present in some devices */
 		s2mps11_clk->iodev = iodev;
-		s2mps11_clk->hw.init = &s2mps11_clks_init[i];
+		s2mps11_clk->hw.init = &clks_init[i];
 		s2mps11_clk->mask = 1 << i;
 		s2mps11_clk->reg = s2mps11_reg;
 
@@ -220,8 +243,12 @@ static int s2mps11_clk_probe(struct platform_device *pdev)
 		clkdev_add(s2mps11_clk->lookup);
 	}
 
-	for (i = 0; i < S2MPS11_CLKS_NUM; i++)
+	for (i = 0; i < S2MPS11_CLKS_NUM; i++) {
+		/* Skip clocks not present on S2MPS14 */
+		if (!clks_init[i].name)
+			continue;
 		clk_table[i] = s2mps11_clks[i].clk;
+	}
 
 	clk_data.clks = clk_table;
 	clk_data.clk_num = S2MPS11_CLKS_NUM;
@@ -254,14 +281,19 @@ static int s2mps11_clk_remove(struct platform_device *pdev)
 	/* Drop the reference obtained in s2mps11_clk_parse_dt */
 	of_node_put(s2mps11_clks[0].clk_np);
 
-	for (i = 0; i < S2MPS11_CLKS_NUM; i++)
+	for (i = 0; i < S2MPS11_CLKS_NUM; i++) {
+		/* Skip clocks not present on S2MPS14 */
+		if (!s2mps11_clks[i].lookup)
+			continue;
 		clkdev_drop(s2mps11_clks[i].lookup);
+	}
 
 	return 0;
 }
 
 static const struct platform_device_id s2mps11_clk_id[] = {
 	{ "s2mps11-clk", S2MPS11X},
+	{ "s2mps14-clk", S2MPS14X},
 	{ "s5m8767-clk", S5M8767X},
 	{ },
 };
-- 
cgit v1.2.3


From 63a00269cba5a0795365467e2f6be073d984c565 Mon Sep 17 00:00:00 2001
From: Georgi Djakov <gdjakov@mm-sol.com>
Date: Tue, 20 May 2014 19:50:54 +0300
Subject: clk: qcom: Fix blsp2_ahb_clk register offset

The address of the blsp2_ahb_clk register is incorrect. Fix it.

Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/qcom/gcc-msm8974.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/clk/qcom/gcc-msm8974.c b/drivers/clk/qcom/gcc-msm8974.c
index 0d1edc1e9b31..7a420fcdb89e 100644
--- a/drivers/clk/qcom/gcc-msm8974.c
+++ b/drivers/clk/qcom/gcc-msm8974.c
@@ -1341,7 +1341,7 @@ static struct clk_branch gcc_blsp1_uart6_apps_clk = {
 };
 
 static struct clk_branch gcc_blsp2_ahb_clk = {
-	.halt_reg = 0x05c4,
+	.halt_reg = 0x0944,
 	.halt_check = BRANCH_HALT_VOTED,
 	.clkr = {
 		.enable_reg = 0x1484,
-- 
cgit v1.2.3


From c2152d0e4de54f4f5a9cff2316d7cfb04fdfad45 Mon Sep 17 00:00:00 2001
From: Alex Elder <elder@linaro.org>
Date: Tue, 27 May 2014 11:56:56 -0500
Subject: clk: bcm/kona: implement determine_rate()

Implement the clk->determine_rate method for Broadcom Kona peripheral
clocks.  This allows a peripheral clock to be re-parented in order to
satisfy a rate change request.  This takes the place of the previous
kona_peri_clk_round_rate() functionality, though that function remains
because it is used by the new one.

The parent clock that allows the peripheral clock to produce a rate
closest to the one requested is the one selected, though the current
parent is used by default.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/bcm/clk-kona.c | 54 +++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 53 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/clk/bcm/clk-kona.c b/drivers/clk/bcm/clk-kona.c
index d603c4e22fca..95af2e665dd3 100644
--- a/drivers/clk/bcm/clk-kona.c
+++ b/drivers/clk/bcm/clk-kona.c
@@ -1031,6 +1031,58 @@ static long kona_peri_clk_round_rate(struct clk_hw *hw, unsigned long rate,
 				rate ? rate : 1, *parent_rate, NULL);
 }
 
+static long kona_peri_clk_determine_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long *best_parent_rate, struct clk **best_parent)
+{
+	struct kona_clk *bcm_clk = to_kona_clk(hw);
+	struct clk *clk = hw->clk;
+	struct clk *current_parent;
+	unsigned long parent_rate;
+	unsigned long best_delta;
+	unsigned long best_rate;
+	u32 parent_count;
+	u32 which;
+
+	/*
+	 * If there is no other parent to choose, use the current one.
+	 * Note:  We don't honor (or use) CLK_SET_RATE_NO_REPARENT.
+	 */
+	WARN_ON_ONCE(bcm_clk->init_data.flags & CLK_SET_RATE_NO_REPARENT);
+	parent_count = (u32)bcm_clk->init_data.num_parents;
+	if (parent_count < 2)
+		return kona_peri_clk_round_rate(hw, rate, best_parent_rate);
+
+	/* Unless we can do better, stick with current parent */
+	current_parent = clk_get_parent(clk);
+	parent_rate = __clk_get_rate(current_parent);
+	best_rate = kona_peri_clk_round_rate(hw, rate, &parent_rate);
+	best_delta = abs(best_rate - rate);
+
+	/* Check whether any other parent clock can produce a better result */
+	for (which = 0; which < parent_count; which++) {
+		struct clk *parent = clk_get_parent_by_index(clk, which);
+		unsigned long delta;
+		unsigned long other_rate;
+
+		BUG_ON(!parent);
+		if (parent == current_parent)
+			continue;
+
+		/* We don't support CLK_SET_RATE_PARENT */
+		parent_rate = __clk_get_rate(parent);
+		other_rate = kona_peri_clk_round_rate(hw, rate, &parent_rate);
+		delta = abs(other_rate - rate);
+		if (delta < best_delta) {
+			best_delta = delta;
+			best_rate = other_rate;
+			*best_parent = parent;
+			*best_parent_rate = parent_rate;
+		}
+	}
+
+	return best_rate;
+}
+
 static int kona_peri_clk_set_parent(struct clk_hw *hw, u8 index)
 {
 	struct kona_clk *bcm_clk = to_kona_clk(hw);
@@ -1135,7 +1187,7 @@ struct clk_ops kona_peri_clk_ops = {
 	.disable = kona_peri_clk_disable,
 	.is_enabled = kona_peri_clk_is_enabled,
 	.recalc_rate = kona_peri_clk_recalc_rate,
-	.round_rate = kona_peri_clk_round_rate,
+	.determine_rate = kona_peri_clk_determine_rate,
 	.set_parent = kona_peri_clk_set_parent,
 	.get_parent = kona_peri_clk_get_parent,
 	.set_rate = kona_peri_clk_set_rate,
-- 
cgit v1.2.3


From 65e75d42b386d2490c7477bf740c2843167beda8 Mon Sep 17 00:00:00 2001
From: Stephen Boyd <sboyd@codeaurora.org>
Date: Fri, 23 May 2014 17:16:51 -0700
Subject: clk: u300: Terminate of match table

Failure to terminate this match table can lead to boot failures
depending on where the compiler places the match table.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/clk-u300.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers')

diff --git a/drivers/clk/clk-u300.c b/drivers/clk/clk-u300.c
index 3efbdd078d14..406bfc1375b2 100644
--- a/drivers/clk/clk-u300.c
+++ b/drivers/clk/clk-u300.c
@@ -1168,6 +1168,7 @@ static const struct of_device_id u300_clk_match[] __initconst = {
 		.compatible = "stericsson,u300-syscon-mclk",
 		.data = of_u300_syscon_mclk_init,
 	},
+	{}
 };
 
 
-- 
cgit v1.2.3


From 3c17296f28820d2a9fa23e549a1e808a4df5dfc6 Mon Sep 17 00:00:00 2001
From: Tomasz Figa <t.figa@samsung.com>
Date: Wed, 7 May 2014 18:24:10 +0200
Subject: clk: divider: Fix overflow in clk_divider_bestdiv

Commit c686078 ("clk: divider: Add round to closest divider") introduced
a helper function to check whether given divisor is the best one instead
of direct check. However due to int type used instead of unsigned long
for passing calculated rates to this function in certain cases an
overflow could occur, for example when trying to obtain maximum possible
clock rate by calling clk_round_rate(..., UINT_MAX).

This patch fixes this issue by changing the type of rate, now and best
arguments of the function to unsigned long, which is the type that
should be used for clock rates.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/clk-divider.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
index 47eabfab3706..18a9de29df0e 100644
--- a/drivers/clk/clk-divider.c
+++ b/drivers/clk/clk-divider.c
@@ -232,7 +232,7 @@ static int _div_round(struct clk_divider *divider, unsigned long parent_rate,
 }
 
 static bool _is_best_div(struct clk_divider *divider,
-		int rate, int now, int best)
+		unsigned long rate, unsigned long now, unsigned long best)
 {
 	if (divider->flags & CLK_DIVIDER_ROUND_CLOSEST)
 		return abs(rate - now) < abs(rate - best);
-- 
cgit v1.2.3


From 8f213af2c0309659f2011650a7a7ef3587db9de2 Mon Sep 17 00:00:00 2001
From: Sachin Kamat <sachin.kamat@linaro.org>
Date: Mon, 26 May 2014 09:46:28 +0530
Subject: clk/exynos4: Fix compilation warning

Fixes the following warning:
WARNING: drivers/built-in.o(.text.unlikely+0x2c50): Section mismatch in reference from the function exynos4_clk_sleep_init() to the (unknown reference) .init.data:(unknown)
   The function exynos4_clk_sleep_init() references
   the (unknown reference) __initdata (unknown).
   This is often because exynos4_clk_sleep_init lacks a __initdata
   annotation or the annotation of (unknown) is wrong.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/samsung/clk-exynos4.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers')

diff --git a/drivers/clk/samsung/clk-exynos4.c b/drivers/clk/samsung/clk-exynos4.c
index b4f967210175..99980da672a8 100644
--- a/drivers/clk/samsung/clk-exynos4.c
+++ b/drivers/clk/samsung/clk-exynos4.c
@@ -324,7 +324,7 @@ static struct syscore_ops exynos4_clk_syscore_ops = {
 	.resume = exynos4_clk_resume,
 };
 
-static void exynos4_clk_sleep_init(void)
+static void __init exynos4_clk_sleep_init(void)
 {
 	exynos4_save_common = samsung_clk_alloc_reg_dump(exynos4_clk_regs,
 					ARRAY_SIZE(exynos4_clk_regs));
@@ -359,7 +359,7 @@ err_warn:
 		__func__);
 }
 #else
-static void exynos4_clk_sleep_init(void) {}
+static void __init exynos4_clk_sleep_init(void) {}
 #endif
 
 /* list of all parent clock list */
-- 
cgit v1.2.3


From 70040b356fb4f8b0aeb2f9121bed77d61e5846af Mon Sep 17 00:00:00 2001
From: Stephen Boyd <sboyd@codeaurora.org>
Date: Fri, 23 May 2014 17:16:50 -0700
Subject: clk: st: Terminate of match table

Failure to terminate this match table can lead to boot failures
depending on where the compiler places the match table.

Cc: Gabriel FERNANDEZ <gabriel.fernandez@st.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/st/clkgen-pll.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers')

diff --git a/drivers/clk/st/clkgen-pll.c b/drivers/clk/st/clkgen-pll.c
index a886702f7c8b..d8b9b1a2aeda 100644
--- a/drivers/clk/st/clkgen-pll.c
+++ b/drivers/clk/st/clkgen-pll.c
@@ -655,6 +655,7 @@ static struct of_device_id c32_gpu_pll_of_match[] = {
 		.compatible = "st,stih416-gpu-pll-c32",
 		.data = &st_pll1200c32_gpu_416,
 	},
+	{}
 };
 
 static void __init clkgengpu_c32_pll_setup(struct device_node *np)
-- 
cgit v1.2.3


From beca8ccce46b915391fdb93508ac7acbe6adb88d Mon Sep 17 00:00:00 2001
From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Date: Mon, 19 May 2014 18:43:24 +0200
Subject: clk: berlin: add driver for BG2x audio/video PLL

This is a driver for the AVPLLs built upon a VCO with 8 channels each
found on Marvell Berlin2 SoCs. While both VCOs found on BG2/BG2CD share
the same register set, sometimes registers shifts for one of the VCOs
are a bit off. Nothing serious that should require a separate driver,
so deal with both VCOs in a single driver instead.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/Makefile               |   1 +
 drivers/clk/berlin/Makefile        |   1 +
 drivers/clk/berlin/berlin2-avpll.c | 393 +++++++++++++++++++++++++++++++++++++
 drivers/clk/berlin/berlin2-avpll.h |  36 ++++
 4 files changed, 431 insertions(+)
 create mode 100644 drivers/clk/berlin/Makefile
 create mode 100644 drivers/clk/berlin/berlin2-avpll.c
 create mode 100644 drivers/clk/berlin/berlin2-avpll.h

(limited to 'drivers')

diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index f30357aa5471..b25a1fe0d40e 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -32,6 +32,7 @@ obj-$(CONFIG_COMMON_CLK_WM831X)		+= clk-wm831x.o
 obj-$(CONFIG_COMMON_CLK_XGENE)		+= clk-xgene.o
 obj-$(CONFIG_COMMON_CLK_AT91)		+= at91/
 obj-$(CONFIG_ARCH_BCM_MOBILE)		+= bcm/
+obj-$(CONFIG_ARCH_BERLIN)		+= berlin/
 obj-$(CONFIG_ARCH_HI3xxx)		+= hisilicon/
 obj-$(CONFIG_ARCH_HIP04)		+= hisilicon/
 obj-$(CONFIG_ARCH_HIX5HD2)		+= hisilicon/
diff --git a/drivers/clk/berlin/Makefile b/drivers/clk/berlin/Makefile
new file mode 100644
index 000000000000..5905733fc7c7
--- /dev/null
+++ b/drivers/clk/berlin/Makefile
@@ -0,0 +1 @@
+obj-y += berlin2-avpll.o
diff --git a/drivers/clk/berlin/berlin2-avpll.c b/drivers/clk/berlin/berlin2-avpll.c
new file mode 100644
index 000000000000..fd0f26c38465
--- /dev/null
+++ b/drivers/clk/berlin/berlin2-avpll.c
@@ -0,0 +1,393 @@
+/*
+ * Copyright (c) 2014 Marvell Technology Group Ltd.
+ *
+ * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ * Alexandre Belloni <alexandre.belloni@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+
+#include "berlin2-avpll.h"
+
+/*
+ * Berlin2 SoCs comprise up to two PLLs called AVPLL built upon a
+ * VCO with 8 channels each, channel 8 is the odd-one-out and does
+ * not provide mul/div.
+ *
+ * Unfortunately, its registers are not named but just numbered. To
+ * get in at least some kind of structure, we split each AVPLL into
+ * the VCOs and each channel into separate clock drivers.
+ *
+ * Also, here and there the VCO registers are a bit different with
+ * respect to bit shifts. Make sure to add a comment for those.
+ */
+#define NUM_CHANNELS	8
+
+#define AVPLL_CTRL(x)		((x) * 0x4)
+
+#define VCO_CTRL0		AVPLL_CTRL(0)
+/* BG2/BG2CDs VCO_B has an additional shift of 4 for its VCO_CTRL0 reg */
+#define  VCO_RESET		BIT(0)
+#define  VCO_POWERUP		BIT(1)
+#define  VCO_INTERPOL_SHIFT	2
+#define  VCO_INTERPOL_MASK	(0xf << VCO_INTERPOL_SHIFT)
+#define  VCO_REG1V45_SEL_SHIFT	6
+#define  VCO_REG1V45_SEL(x)	((x) << VCO_REG1V45_SEL_SHIFT)
+#define  VCO_REG1V45_SEL_1V40	VCO_REG1V45_SEL(0)
+#define  VCO_REG1V45_SEL_1V45	VCO_REG1V45_SEL(1)
+#define  VCO_REG1V45_SEL_1V50	VCO_REG1V45_SEL(2)
+#define  VCO_REG1V45_SEL_1V55	VCO_REG1V45_SEL(3)
+#define  VCO_REG1V45_SEL_MASK	VCO_REG1V45_SEL(3)
+#define  VCO_REG0V9_SEL_SHIFT	8
+#define  VCO_REG0V9_SEL_MASK	(0xf << VCO_REG0V9_SEL_SHIFT)
+#define  VCO_VTHCAL_SHIFT	12
+#define  VCO_VTHCAL(x)		((x) << VCO_VTHCAL_SHIFT)
+#define  VCO_VTHCAL_0V90	VCO_VTHCAL(0)
+#define  VCO_VTHCAL_0V95	VCO_VTHCAL(1)
+#define  VCO_VTHCAL_1V00	VCO_VTHCAL(2)
+#define  VCO_VTHCAL_1V05	VCO_VTHCAL(3)
+#define  VCO_VTHCAL_MASK	VCO_VTHCAL(3)
+#define  VCO_KVCOEXT_SHIFT	14
+#define  VCO_KVCOEXT_MASK	(0x3 << VCO_KVCOEXT_SHIFT)
+#define  VCO_KVCOEXT_ENABLE	BIT(17)
+#define  VCO_V2IEXT_SHIFT	18
+#define  VCO_V2IEXT_MASK	(0xf << VCO_V2IEXT_SHIFT)
+#define  VCO_V2IEXT_ENABLE	BIT(22)
+#define  VCO_SPEED_SHIFT	23
+#define  VCO_SPEED(x)		((x) << VCO_SPEED_SHIFT)
+#define  VCO_SPEED_1G08_1G21	VCO_SPEED(0)
+#define  VCO_SPEED_1G21_1G40	VCO_SPEED(1)
+#define  VCO_SPEED_1G40_1G61	VCO_SPEED(2)
+#define  VCO_SPEED_1G61_1G86	VCO_SPEED(3)
+#define  VCO_SPEED_1G86_2G00	VCO_SPEED(4)
+#define  VCO_SPEED_2G00_2G22	VCO_SPEED(5)
+#define  VCO_SPEED_2G22		VCO_SPEED(6)
+#define  VCO_SPEED_MASK		VCO_SPEED(0x7)
+#define  VCO_CLKDET_ENABLE	BIT(26)
+#define VCO_CTRL1		AVPLL_CTRL(1)
+#define  VCO_REFDIV_SHIFT	0
+#define  VCO_REFDIV(x)		((x) << VCO_REFDIV_SHIFT)
+#define  VCO_REFDIV_1		VCO_REFDIV(0)
+#define  VCO_REFDIV_2		VCO_REFDIV(1)
+#define  VCO_REFDIV_4		VCO_REFDIV(2)
+#define  VCO_REFDIV_3		VCO_REFDIV(3)
+#define  VCO_REFDIV_MASK	VCO_REFDIV(0x3f)
+#define  VCO_FBDIV_SHIFT	6
+#define  VCO_FBDIV(x)		((x) << VCO_FBDIV_SHIFT)
+#define  VCO_FBDIV_MASK		VCO_FBDIV(0xff)
+#define  VCO_ICP_SHIFT		14
+/* PLL Charge Pump Current = 10uA * (x + 1) */
+#define  VCO_ICP(x)		((x) << VCO_ICP_SHIFT)
+#define  VCO_ICP_MASK		VCO_ICP(0xf)
+#define  VCO_LOAD_CAP		BIT(18)
+#define  VCO_CALIBRATION_START	BIT(19)
+#define VCO_FREQOFFSETn(x)	AVPLL_CTRL(3 + (x))
+#define  VCO_FREQOFFSET_MASK	0x7ffff
+#define VCO_CTRL10		AVPLL_CTRL(10)
+#define  VCO_POWERUP_CH1	BIT(20)
+#define VCO_CTRL11		AVPLL_CTRL(11)
+#define VCO_CTRL12		AVPLL_CTRL(12)
+#define VCO_CTRL13		AVPLL_CTRL(13)
+#define VCO_CTRL14		AVPLL_CTRL(14)
+#define VCO_CTRL15		AVPLL_CTRL(15)
+#define VCO_SYNC1n(x)		AVPLL_CTRL(15 + (x))
+#define  VCO_SYNC1_MASK		0x1ffff
+#define VCO_SYNC2n(x)		AVPLL_CTRL(23 + (x))
+#define  VCO_SYNC2_MASK		0x1ffff
+#define VCO_CTRL30		AVPLL_CTRL(30)
+#define  VCO_DPLL_CH1_ENABLE	BIT(17)
+
+struct berlin2_avpll_vco {
+	struct clk_hw hw;
+	void __iomem *base;
+	u8 flags;
+};
+
+#define to_avpll_vco(hw) container_of(hw, struct berlin2_avpll_vco, hw)
+
+static int berlin2_avpll_vco_is_enabled(struct clk_hw *hw)
+{
+	struct berlin2_avpll_vco *vco = to_avpll_vco(hw);
+	u32 reg;
+
+	reg = readl_relaxed(vco->base + VCO_CTRL0);
+	if (vco->flags & BERLIN2_AVPLL_BIT_QUIRK)
+		reg >>= 4;
+
+	return !!(reg & VCO_POWERUP);
+}
+
+static int berlin2_avpll_vco_enable(struct clk_hw *hw)
+{
+	struct berlin2_avpll_vco *vco = to_avpll_vco(hw);
+	u32 reg;
+
+	reg = readl_relaxed(vco->base + VCO_CTRL0);
+	if (vco->flags & BERLIN2_AVPLL_BIT_QUIRK)
+		reg |= VCO_POWERUP << 4;
+	else
+		reg |= VCO_POWERUP;
+	writel_relaxed(reg, vco->base + VCO_CTRL0);
+
+	return 0;
+}
+
+static void berlin2_avpll_vco_disable(struct clk_hw *hw)
+{
+	struct berlin2_avpll_vco *vco = to_avpll_vco(hw);
+	u32 reg;
+
+	reg = readl_relaxed(vco->base + VCO_CTRL0);
+	if (vco->flags & BERLIN2_AVPLL_BIT_QUIRK)
+		reg &= ~(VCO_POWERUP << 4);
+	else
+		reg &= ~VCO_POWERUP;
+	writel_relaxed(reg, vco->base + VCO_CTRL0);
+}
+
+static u8 vco_refdiv[] = { 1, 2, 4, 3 };
+
+static unsigned long
+berlin2_avpll_vco_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
+{
+	struct berlin2_avpll_vco *vco = to_avpll_vco(hw);
+	u32 reg, refdiv, fbdiv;
+	u64 freq = parent_rate;
+
+	/* AVPLL VCO frequency: Fvco = (Fref / refdiv) * fbdiv */
+	reg = readl_relaxed(vco->base + VCO_CTRL1);
+	refdiv = (reg & VCO_REFDIV_MASK) >> VCO_REFDIV_SHIFT;
+	refdiv = vco_refdiv[refdiv];
+	fbdiv = (reg & VCO_FBDIV_MASK) >> VCO_FBDIV_SHIFT;
+	freq *= fbdiv;
+	do_div(freq, refdiv);
+
+	return (unsigned long)freq;
+}
+
+static const struct clk_ops berlin2_avpll_vco_ops = {
+	.is_enabled	= berlin2_avpll_vco_is_enabled,
+	.enable		= berlin2_avpll_vco_enable,
+	.disable	= berlin2_avpll_vco_disable,
+	.recalc_rate	= berlin2_avpll_vco_recalc_rate,
+};
+
+struct clk * __init berlin2_avpll_vco_register(void __iomem *base,
+			       const char *name, const char *parent_name,
+			       u8 vco_flags, unsigned long flags)
+{
+	struct berlin2_avpll_vco *vco;
+	struct clk_init_data init;
+
+	vco = kzalloc(sizeof(*vco), GFP_KERNEL);
+	if (!vco)
+		return ERR_PTR(-ENOMEM);
+
+	vco->base = base;
+	vco->flags = vco_flags;
+	vco->hw.init = &init;
+	init.name = name;
+	init.ops = &berlin2_avpll_vco_ops;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+	init.flags = flags;
+
+	return clk_register(NULL, &vco->hw);
+}
+
+struct berlin2_avpll_channel {
+	struct clk_hw hw;
+	void __iomem *base;
+	u8 flags;
+	u8 index;
+};
+
+#define to_avpll_channel(hw) container_of(hw, struct berlin2_avpll_channel, hw)
+
+static int berlin2_avpll_channel_is_enabled(struct clk_hw *hw)
+{
+	struct berlin2_avpll_channel *ch = to_avpll_channel(hw);
+	u32 reg;
+
+	if (ch->index == 7)
+		return 1;
+
+	reg = readl_relaxed(ch->base + VCO_CTRL10);
+	reg &= VCO_POWERUP_CH1 << ch->index;
+
+	return !!reg;
+}
+
+static int berlin2_avpll_channel_enable(struct clk_hw *hw)
+{
+	struct berlin2_avpll_channel *ch = to_avpll_channel(hw);
+	u32 reg;
+
+	reg = readl_relaxed(ch->base + VCO_CTRL10);
+	reg |= VCO_POWERUP_CH1 << ch->index;
+	writel_relaxed(reg, ch->base + VCO_CTRL10);
+
+	return 0;
+}
+
+static void berlin2_avpll_channel_disable(struct clk_hw *hw)
+{
+	struct berlin2_avpll_channel *ch = to_avpll_channel(hw);
+	u32 reg;
+
+	reg = readl_relaxed(ch->base + VCO_CTRL10);
+	reg &= ~(VCO_POWERUP_CH1 << ch->index);
+	writel_relaxed(reg, ch->base + VCO_CTRL10);
+}
+
+static const u8 div_hdmi[] = { 1, 2, 4, 6 };
+static const u8 div_av1[] = { 1, 2, 5, 5 };
+
+static unsigned long
+berlin2_avpll_channel_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
+{
+	struct berlin2_avpll_channel *ch = to_avpll_channel(hw);
+	u32 reg, div_av2, div_av3, divider = 1;
+	u64 freq = parent_rate;
+
+	reg = readl_relaxed(ch->base + VCO_CTRL30);
+	if ((reg & (VCO_DPLL_CH1_ENABLE << ch->index)) == 0)
+		goto skip_div;
+
+	/*
+	 * Fch = (Fref * sync2) /
+	 *    (sync1 * div_hdmi * div_av1 * div_av2 * div_av3)
+	 */
+
+	reg = readl_relaxed(ch->base + VCO_SYNC1n(ch->index));
+	/* BG2/BG2CDs SYNC1 reg on AVPLL_B channel 1 is shifted by 4 */
+	if (ch->flags & BERLIN2_AVPLL_BIT_QUIRK && ch->index == 0)
+		reg >>= 4;
+	divider = reg & VCO_SYNC1_MASK;
+
+	reg = readl_relaxed(ch->base + VCO_SYNC2n(ch->index));
+	freq *= reg & VCO_SYNC2_MASK;
+
+	/* Channel 8 has no dividers */
+	if (ch->index == 7)
+		goto skip_div;
+
+	/*
+	 * HDMI divider start at VCO_CTRL11, bit 7; MSB is enable, lower 2 bit
+	 * determine divider.
+	 */
+	reg = readl_relaxed(ch->base + VCO_CTRL11) >> 7;
+	reg = (reg >> (ch->index * 3));
+	if (reg & BIT(2))
+		divider *= div_hdmi[reg & 0x3];
+
+	/*
+	 * AV1 divider start at VCO_CTRL11, bit 28; MSB is enable, lower 2 bit
+	 * determine divider.
+	 */
+	if (ch->index == 0) {
+		reg = readl_relaxed(ch->base + VCO_CTRL11);
+		reg >>= 28;
+	} else {
+		reg = readl_relaxed(ch->base + VCO_CTRL12);
+		reg >>= (ch->index-1) * 3;
+	}
+	if (reg & BIT(2))
+		divider *= div_av1[reg & 0x3];
+
+	/*
+	 * AV2 divider start at VCO_CTRL12, bit 18; each 7 bits wide,
+	 * zero is not a valid value.
+	 */
+	if (ch->index < 2) {
+		reg = readl_relaxed(ch->base + VCO_CTRL12);
+		reg >>= 18 + (ch->index * 7);
+	} else if (ch->index < 7) {
+		reg = readl_relaxed(ch->base + VCO_CTRL13);
+		reg >>= (ch->index - 2) * 7;
+	} else {
+		reg = readl_relaxed(ch->base + VCO_CTRL14);
+	}
+	div_av2 = reg & 0x7f;
+	if (div_av2)
+		divider *= div_av2;
+
+	/*
+	 * AV3 divider start at VCO_CTRL14, bit 7; each 4 bits wide.
+	 * AV2/AV3 form a fractional divider, where only specfic values for AV3
+	 * are allowed. AV3 != 0 divides by AV2/2, AV3=0 is bypass.
+	 */
+	if (ch->index < 6) {
+		reg = readl_relaxed(ch->base + VCO_CTRL14);
+		reg >>= 7 + (ch->index * 4);
+	} else {
+		reg = readl_relaxed(ch->base + VCO_CTRL15);
+	}
+	div_av3 = reg & 0xf;
+	if (div_av2 && div_av3)
+		freq *= 2;
+
+skip_div:
+	do_div(freq, divider);
+	return (unsigned long)freq;
+}
+
+static const struct clk_ops berlin2_avpll_channel_ops = {
+	.is_enabled	= berlin2_avpll_channel_is_enabled,
+	.enable		= berlin2_avpll_channel_enable,
+	.disable	= berlin2_avpll_channel_disable,
+	.recalc_rate	= berlin2_avpll_channel_recalc_rate,
+};
+
+/*
+ * Another nice quirk:
+ * On some production SoCs, AVPLL channels are scrambled with respect
+ * to the channel numbering in the registers but still referenced by
+ * their original channel numbers. We deal with it by having a flag
+ * and a translation table for the index.
+ */
+static const u8 quirk_index[] __initconst = { 0, 6, 5, 4, 3, 2, 1, 7 };
+
+struct clk * __init berlin2_avpll_channel_register(void __iomem *base,
+			   const char *name, u8 index, const char *parent_name,
+			   u8 ch_flags, unsigned long flags)
+{
+	struct berlin2_avpll_channel *ch;
+	struct clk_init_data init;
+
+	ch = kzalloc(sizeof(*ch), GFP_KERNEL);
+	if (!ch)
+		return ERR_PTR(-ENOMEM);
+
+	ch->base = base;
+	if (ch_flags & BERLIN2_AVPLL_SCRAMBLE_QUIRK)
+		ch->index = quirk_index[index];
+	else
+		ch->index = index;
+
+	ch->flags = ch_flags;
+	ch->hw.init = &init;
+	init.name = name;
+	init.ops = &berlin2_avpll_channel_ops;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+	init.flags = flags;
+
+	return clk_register(NULL, &ch->hw);
+}
diff --git a/drivers/clk/berlin/berlin2-avpll.h b/drivers/clk/berlin/berlin2-avpll.h
new file mode 100644
index 000000000000..a37f5068d299
--- /dev/null
+++ b/drivers/clk/berlin/berlin2-avpll.h
@@ -0,0 +1,36 @@
+/*
+ * Copyright (c) 2014 Marvell Technology Group Ltd.
+ *
+ * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ * Alexandre Belloni <alexandre.belloni@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __BERLIN2_AVPLL_H
+#define __BERLIN2_AVPLL_H
+
+struct clk;
+
+#define BERLIN2_AVPLL_BIT_QUIRK		BIT(0)
+#define BERLIN2_AVPLL_SCRAMBLE_QUIRK	BIT(1)
+
+struct clk * __init
+berlin2_avpll_vco_register(void __iomem *base, const char *name,
+	   const char *parent_name, u8 vco_flags, unsigned long flags);
+
+struct clk * __init
+berlin2_avpll_channel_register(void __iomem *base, const char *name,
+		       u8 index, const char *parent_name, u8 ch_flags,
+		       unsigned long flags);
+
+#endif /* __BERLIN2_AVPLL_H */
-- 
cgit v1.2.3


From cf8de5a7f870c7e3940d888e2c6ce6988aeb26c6 Mon Sep 17 00:00:00 2001
From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Date: Mon, 19 May 2014 18:43:25 +0200
Subject: clk: berlin: add driver for BG2x simple PLLs

This is a clock driver for the simple PLLs found on Berlin SoCs.
With repect to PLL registers and features, BG2/BG2CD and BG2Q are
slightly different, e.g. different allowed VCO dividers and bit
shifts.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/berlin/Makefile      |   2 +-
 drivers/clk/berlin/berlin2-pll.c | 117 +++++++++++++++++++++++++++++++++++++++
 drivers/clk/berlin/berlin2-pll.h |  37 +++++++++++++
 3 files changed, 155 insertions(+), 1 deletion(-)
 create mode 100644 drivers/clk/berlin/berlin2-pll.c
 create mode 100644 drivers/clk/berlin/berlin2-pll.h

(limited to 'drivers')

diff --git a/drivers/clk/berlin/Makefile b/drivers/clk/berlin/Makefile
index 5905733fc7c7..9d3490e9782f 100644
--- a/drivers/clk/berlin/Makefile
+++ b/drivers/clk/berlin/Makefile
@@ -1 +1 @@
-obj-y += berlin2-avpll.o
+obj-y += berlin2-avpll.o berlin2-pll.o
diff --git a/drivers/clk/berlin/berlin2-pll.c b/drivers/clk/berlin/berlin2-pll.c
new file mode 100644
index 000000000000..bdc506b03824
--- /dev/null
+++ b/drivers/clk/berlin/berlin2-pll.c
@@ -0,0 +1,117 @@
+/*
+ * Copyright (c) 2014 Marvell Technology Group Ltd.
+ *
+ * Alexandre Belloni <alexandre.belloni@free-electrons.com>
+ * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <asm/div64.h>
+
+#include "berlin2-div.h"
+
+struct berlin2_pll_map {
+	const u8 vcodiv[16];
+	u8 mult;
+	u8 fbdiv_shift;
+	u8 rfdiv_shift;
+	u8 divsel_shift;
+};
+
+struct berlin2_pll {
+	struct clk_hw hw;
+	void __iomem *base;
+	struct berlin2_pll_map map;
+};
+
+#define to_berlin2_pll(hw) container_of(hw, struct berlin2_pll, hw)
+
+#define SPLL_CTRL0	0x00
+#define SPLL_CTRL1	0x04
+#define SPLL_CTRL2	0x08
+#define SPLL_CTRL3	0x0c
+#define SPLL_CTRL4	0x10
+
+#define FBDIV_MASK	0x1ff
+#define RFDIV_MASK	0x1f
+#define DIVSEL_MASK	0xf
+
+/*
+ * The output frequency formula for the pll is:
+ * clkout = fbdiv / refdiv * parent / vcodiv
+ */
+static unsigned long
+berlin2_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
+{
+	struct berlin2_pll *pll = to_berlin2_pll(hw);
+	struct berlin2_pll_map *map = &pll->map;
+	u32 val, fbdiv, rfdiv, vcodivsel, vcodiv;
+	u64 rate = parent_rate;
+
+	val = readl_relaxed(pll->base + SPLL_CTRL0);
+	fbdiv = (val >> map->fbdiv_shift) & FBDIV_MASK;
+	rfdiv = (val >> map->rfdiv_shift) & RFDIV_MASK;
+	if (rfdiv == 0) {
+		pr_warn("%s has zero rfdiv\n", __clk_get_name(hw->clk));
+		rfdiv = 1;
+	}
+
+	val = readl_relaxed(pll->base + SPLL_CTRL1);
+	vcodivsel = (val >> map->divsel_shift) & DIVSEL_MASK;
+	vcodiv = map->vcodiv[vcodivsel];
+	if (vcodiv == 0) {
+		pr_warn("%s has zero vcodiv (index %d)\n",
+			__clk_get_name(hw->clk), vcodivsel);
+		vcodiv = 1;
+	}
+
+	rate *= fbdiv * map->mult;
+	do_div(rate, rfdiv * vcodiv);
+
+	return (unsigned long)rate;
+}
+
+static const struct clk_ops berlin2_pll_ops = {
+	.recalc_rate	= berlin2_pll_recalc_rate,
+};
+
+struct clk * __init
+berlin2_pll_register(const struct berlin2_pll_map *map,
+		     void __iomem *base, const char *name,
+		     const char *parent_name, unsigned long flags)
+{
+	struct clk_init_data init;
+	struct berlin2_pll *pll;
+
+	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+	if (!pll)
+		return ERR_PTR(-ENOMEM);
+
+	/* copy pll_map to allow __initconst */
+	memcpy(&pll->map, map, sizeof(*map));
+	pll->base = base;
+	pll->hw.init = &init;
+	init.name = name;
+	init.ops = &berlin2_pll_ops;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+	init.flags = flags;
+
+	return clk_register(NULL, &pll->hw);
+}
diff --git a/drivers/clk/berlin/berlin2-pll.h b/drivers/clk/berlin/berlin2-pll.h
new file mode 100644
index 000000000000..8831ce27ac1e
--- /dev/null
+++ b/drivers/clk/berlin/berlin2-pll.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (c) 2014 Marvell Technology Group Ltd.
+ *
+ * Alexandre Belloni <alexandre.belloni@free-electrons.com>
+ * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __BERLIN2_PLL_H
+#define __BERLIN2_PLL_H
+
+struct clk;
+
+struct berlin2_pll_map {
+	const u8 vcodiv[16];
+	u8 mult;
+	u8 fbdiv_shift;
+	u8 rfdiv_shift;
+	u8 divsel_shift;
+};
+
+struct clk * __init
+berlin2_pll_register(const struct berlin2_pll_map *map,
+		     void __iomem *base, const char *name,
+		     const char *parent_name, unsigned long flags);
+
+#endif /* __BERLIN2_PLL_H */
-- 
cgit v1.2.3


From 6f9ba9b44724888c5419289e790077ab1621c62d Mon Sep 17 00:00:00 2001
From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Date: Mon, 19 May 2014 18:43:26 +0200
Subject: clk: berlin: add driver for BG2x complex divider cells

This is a driver for the complex divider cells found on Marvell Berlin2
SoCs. The cells come in two flavors: single register cells and shared
register cells.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/berlin/Makefile      |   2 +-
 drivers/clk/berlin/berlin2-div.c | 265 +++++++++++++++++++++++++++++++++++++++
 drivers/clk/berlin/berlin2-div.h |  89 +++++++++++++
 3 files changed, 355 insertions(+), 1 deletion(-)
 create mode 100644 drivers/clk/berlin/berlin2-div.c
 create mode 100644 drivers/clk/berlin/berlin2-div.h

(limited to 'drivers')

diff --git a/drivers/clk/berlin/Makefile b/drivers/clk/berlin/Makefile
index 9d3490e9782f..f0a7dc8b5e30 100644
--- a/drivers/clk/berlin/Makefile
+++ b/drivers/clk/berlin/Makefile
@@ -1 +1 @@
-obj-y += berlin2-avpll.o berlin2-pll.o
+obj-y += berlin2-avpll.o berlin2-pll.o berlin2-div.o
diff --git a/drivers/clk/berlin/berlin2-div.c b/drivers/clk/berlin/berlin2-div.c
new file mode 100644
index 000000000000..81ff97f8aa0b
--- /dev/null
+++ b/drivers/clk/berlin/berlin2-div.c
@@ -0,0 +1,265 @@
+/*
+ * Copyright (c) 2014 Marvell Technology Group Ltd.
+ *
+ * Alexandre Belloni <alexandre.belloni@free-electrons.com>
+ * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/bitops.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#include "berlin2-div.h"
+
+/*
+ * Clock dividers in Berlin2 SoCs comprise a complex cell to select
+ * input pll and divider. The virtual structure as it is used in Marvell
+ * BSP code can be seen as:
+ *
+ *                      +---+
+ * pll0 --------------->| 0 |                   +---+
+ *           +---+      |(B)|--+--------------->| 0 |      +---+
+ * pll1.0 -->| 0 |  +-->| 1 |  |   +--------+   |(E)|----->| 0 |   +---+
+ * pll1.1 -->| 1 |  |   +---+  +-->|(C) 1:M |-->| 1 |      |(F)|-->|(G)|->
+ * ...    -->|(A)|--+          |   +--------+   +---+  +-->| 1 |   +---+
+ * ...    -->|   |             +-->|(D) 1:3 |----------+   +---+
+ * pll1.N -->| N |                 +---------
+ *           +---+
+ *
+ * (A) input pll clock mux controlled by               <PllSelect[1:n]>
+ * (B) input pll bypass mux controlled by              <PllSwitch>
+ * (C) programmable clock divider controlled by        <Select[1:n]>
+ * (D) constant div-by-3 clock divider
+ * (E) programmable clock divider bypass controlled by <Switch>
+ * (F) constant div-by-3 clock mux controlled by       <D3Switch>
+ * (G) clock gate controlled by                        <Enable>
+ *
+ * For whatever reason, above control signals come in two flavors:
+ * - single register dividers with all bits in one register
+ * - shared register dividers with bits spread over multiple registers
+ *   (including signals for the same cell spread over consecutive registers)
+ *
+ * Also, clock gate and pll mux is not available on every div cell, so
+ * we have to deal with those, too. We reuse common clock composite driver
+ * for it.
+ */
+
+#define PLL_SELECT_MASK	0x7
+#define DIV_SELECT_MASK	0x7
+
+struct berlin2_div {
+	struct clk_hw hw;
+	void __iomem *base;
+	struct berlin2_div_map map;
+	spinlock_t *lock;
+};
+
+#define to_berlin2_div(hw) container_of(hw, struct berlin2_div, hw)
+
+static u8 clk_div[] = { 1, 2, 4, 6, 8, 12, 1, 1 };
+
+static int berlin2_div_is_enabled(struct clk_hw *hw)
+{
+	struct berlin2_div *div = to_berlin2_div(hw);
+	struct berlin2_div_map *map = &div->map;
+	u32 reg;
+
+	if (div->lock)
+		spin_lock(div->lock);
+
+	reg = readl_relaxed(div->base + map->gate_offs);
+	reg >>= map->gate_shift;
+
+	if (div->lock)
+		spin_unlock(div->lock);
+
+	return (reg & 0x1);
+}
+
+static int berlin2_div_enable(struct clk_hw *hw)
+{
+	struct berlin2_div *div = to_berlin2_div(hw);
+	struct berlin2_div_map *map = &div->map;
+	u32 reg;
+
+	if (div->lock)
+		spin_lock(div->lock);
+
+	reg = readl_relaxed(div->base + map->gate_offs);
+	reg |= BIT(map->gate_shift);
+	writel_relaxed(reg, div->base + map->gate_offs);
+
+	if (div->lock)
+		spin_unlock(div->lock);
+
+	return 0;
+}
+
+static void berlin2_div_disable(struct clk_hw *hw)
+{
+	struct berlin2_div *div = to_berlin2_div(hw);
+	struct berlin2_div_map *map = &div->map;
+	u32 reg;
+
+	if (div->lock)
+		spin_lock(div->lock);
+
+	reg = readl_relaxed(div->base + map->gate_offs);
+	reg &= ~BIT(map->gate_shift);
+	writel_relaxed(reg, div->base + map->gate_offs);
+
+	if (div->lock)
+		spin_unlock(div->lock);
+}
+
+static int berlin2_div_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct berlin2_div *div = to_berlin2_div(hw);
+	struct berlin2_div_map *map = &div->map;
+	u32 reg;
+
+	if (div->lock)
+		spin_lock(div->lock);
+
+	/* index == 0 is PLL_SWITCH */
+	reg = readl_relaxed(div->base + map->pll_switch_offs);
+	if (index == 0)
+		reg &= ~BIT(map->pll_switch_shift);
+	else
+		reg |= BIT(map->pll_switch_shift);
+	writel_relaxed(reg, div->base + map->pll_switch_offs);
+
+	/* index > 0 is PLL_SELECT */
+	if (index > 0) {
+		reg = readl_relaxed(div->base + map->pll_select_offs);
+		reg &= ~(PLL_SELECT_MASK << map->pll_select_shift);
+		reg |= (index - 1) << map->pll_select_shift;
+		writel_relaxed(reg, div->base + map->pll_select_offs);
+	}
+
+	if (div->lock)
+		spin_unlock(div->lock);
+
+	return 0;
+}
+
+static u8 berlin2_div_get_parent(struct clk_hw *hw)
+{
+	struct berlin2_div *div = to_berlin2_div(hw);
+	struct berlin2_div_map *map = &div->map;
+	u32 reg;
+	u8 index = 0;
+
+	if (div->lock)
+		spin_lock(div->lock);
+
+	/* PLL_SWITCH == 0 is index 0 */
+	reg = readl_relaxed(div->base + map->pll_switch_offs);
+	reg &= BIT(map->pll_switch_shift);
+	if (reg) {
+		reg = readl_relaxed(div->base + map->pll_select_offs);
+		reg >>= map->pll_select_shift;
+		reg &= PLL_SELECT_MASK;
+		index = 1 + reg;
+	}
+
+	if (div->lock)
+		spin_unlock(div->lock);
+
+	return index;
+}
+
+static unsigned long berlin2_div_recalc_rate(struct clk_hw *hw,
+					     unsigned long parent_rate)
+{
+	struct berlin2_div *div = to_berlin2_div(hw);
+	struct berlin2_div_map *map = &div->map;
+	u32 divsw, div3sw, divider = 1;
+
+	if (div->lock)
+		spin_lock(div->lock);
+
+	divsw = readl_relaxed(div->base + map->div_switch_offs) &
+		(1 << map->div_switch_shift);
+	div3sw = readl_relaxed(div->base + map->div3_switch_offs) &
+		(1 << map->div3_switch_shift);
+
+	/* constant divide-by-3 (dominant) */
+	if (div3sw != 0) {
+		divider = 3;
+	/* divider can be bypassed with DIV_SWITCH == 0 */
+	} else if (divsw == 0) {
+		divider = 1;
+	/* clock divider determined by DIV_SELECT */
+	} else {
+		u32 reg;
+		reg = readl_relaxed(div->base + map->div_select_offs);
+		reg >>= map->div_select_shift;
+		reg &= DIV_SELECT_MASK;
+		divider = clk_div[reg];
+	}
+
+	if (div->lock)
+		spin_unlock(div->lock);
+
+	return parent_rate / divider;
+}
+
+static const struct clk_ops berlin2_div_rate_ops = {
+	.recalc_rate	= berlin2_div_recalc_rate,
+};
+
+static const struct clk_ops berlin2_div_gate_ops = {
+	.is_enabled	= berlin2_div_is_enabled,
+	.enable		= berlin2_div_enable,
+	.disable	= berlin2_div_disable,
+};
+
+static const struct clk_ops berlin2_div_mux_ops = {
+	.set_parent	= berlin2_div_set_parent,
+	.get_parent	= berlin2_div_get_parent,
+};
+
+struct clk * __init
+berlin2_div_register(const struct berlin2_div_map *map,
+		     void __iomem *base, const char *name, u8 div_flags,
+		     const char **parent_names, int num_parents,
+		     unsigned long flags, spinlock_t *lock)
+{
+	const struct clk_ops *mux_ops = &berlin2_div_mux_ops;
+	const struct clk_ops *rate_ops = &berlin2_div_rate_ops;
+	const struct clk_ops *gate_ops = &berlin2_div_gate_ops;
+	struct berlin2_div *div;
+
+	div = kzalloc(sizeof(*div), GFP_KERNEL);
+	if (!div)
+		return ERR_PTR(-ENOMEM);
+
+	/* copy div_map to allow __initconst */
+	memcpy(&div->map, map, sizeof(*map));
+	div->base = base;
+	div->lock = lock;
+
+	if ((div_flags & BERLIN2_DIV_HAS_GATE) == 0)
+		gate_ops = NULL;
+	if ((div_flags & BERLIN2_DIV_HAS_MUX) == 0)
+		mux_ops = NULL;
+
+	return clk_register_composite(NULL, name, parent_names, num_parents,
+				      &div->hw, mux_ops, &div->hw, rate_ops,
+				      &div->hw, gate_ops, flags);
+}
diff --git a/drivers/clk/berlin/berlin2-div.h b/drivers/clk/berlin/berlin2-div.h
new file mode 100644
index 000000000000..15e3384f3116
--- /dev/null
+++ b/drivers/clk/berlin/berlin2-div.h
@@ -0,0 +1,89 @@
+/*
+ * Copyright (c) 2014 Marvell Technology Group Ltd.
+ *
+ * Alexandre Belloni <alexandre.belloni@free-electrons.com>
+ * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __BERLIN2_DIV_H
+#define __BERLIN2_DIV_H
+
+struct clk;
+
+#define BERLIN2_DIV_HAS_GATE		BIT(0)
+#define BERLIN2_DIV_HAS_MUX		BIT(1)
+
+#define BERLIN2_PLL_SELECT(_off, _sh)	\
+	.pll_select_offs = _off,	\
+	.pll_select_shift = _sh
+
+#define BERLIN2_PLL_SWITCH(_off, _sh)	\
+	.pll_switch_offs = _off,	\
+	.pll_switch_shift = _sh
+
+#define BERLIN2_DIV_SELECT(_off, _sh)	\
+	.div_select_offs = _off,	\
+	.div_select_shift = _sh
+
+#define BERLIN2_DIV_SWITCH(_off, _sh)	\
+	.div_switch_offs = _off,	\
+	.div_switch_shift = _sh
+
+#define BERLIN2_DIV_D3SWITCH(_off, _sh)	\
+	.div3_switch_offs = _off,	\
+	.div3_switch_shift = _sh
+
+#define BERLIN2_DIV_GATE(_off, _sh)	\
+	.gate_offs = _off,		\
+	.gate_shift = _sh
+
+#define BERLIN2_SINGLE_DIV(_off)	\
+	BERLIN2_DIV_GATE(_off, 0),	\
+	BERLIN2_PLL_SELECT(_off, 1),	\
+	BERLIN2_PLL_SWITCH(_off, 4),	\
+	BERLIN2_DIV_SWITCH(_off, 5),	\
+	BERLIN2_DIV_D3SWITCH(_off, 6),	\
+	BERLIN2_DIV_SELECT(_off, 7)
+
+struct berlin2_div_map {
+	u16 pll_select_offs;
+	u16 pll_switch_offs;
+	u16 div_select_offs;
+	u16 div_switch_offs;
+	u16 div3_switch_offs;
+	u16 gate_offs;
+	u8 pll_select_shift;
+	u8 pll_switch_shift;
+	u8 div_select_shift;
+	u8 div_switch_shift;
+	u8 div3_switch_shift;
+	u8 gate_shift;
+};
+
+struct berlin2_div_data {
+	const char *name;
+	const u8 *parent_ids;
+	int num_parents;
+	unsigned long flags;
+	struct berlin2_div_map map;
+	u8 div_flags;
+};
+
+struct clk * __init
+berlin2_div_register(const struct berlin2_div_map *map,
+	     void __iomem *base,  const char *name, u8 div_flags,
+	     const char **parent_names, int num_parents,
+	     unsigned long flags,  spinlock_t *lock);
+
+#endif /* __BERLIN2_DIV_H */
-- 
cgit v1.2.3


From ba0fae3b06a69aab4ff18f628f88b9f9d653d734 Mon Sep 17 00:00:00 2001
From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Date: Mon, 19 May 2014 18:43:27 +0200
Subject: clk: berlin: add core clock driver for BG2/BG2CD

This driver deals with the core clocks found on Marvell Berlin
BG2 and BG2CD. For the shared register dividers, make use of the
corresponding driver and add some single clock muxes and gates for
the rest.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/berlin/Makefile |   2 +
 drivers/clk/berlin/bg2.c    | 691 ++++++++++++++++++++++++++++++++++++++++++++
 drivers/clk/berlin/common.h |  29 ++
 3 files changed, 722 insertions(+)
 create mode 100644 drivers/clk/berlin/bg2.c
 create mode 100644 drivers/clk/berlin/common.h

(limited to 'drivers')

diff --git a/drivers/clk/berlin/Makefile b/drivers/clk/berlin/Makefile
index f0a7dc8b5e30..2b33e1e74503 100644
--- a/drivers/clk/berlin/Makefile
+++ b/drivers/clk/berlin/Makefile
@@ -1 +1,3 @@
 obj-y += berlin2-avpll.o berlin2-pll.o berlin2-div.o
+obj-$(CONFIG_MACH_BERLIN_BG2)	+= bg2.o
+obj-$(CONFIG_MACH_BERLIN_BG2CD)	+= bg2.o
diff --git a/drivers/clk/berlin/bg2.c b/drivers/clk/berlin/bg2.c
new file mode 100644
index 000000000000..515fb133495c
--- /dev/null
+++ b/drivers/clk/berlin/bg2.c
@@ -0,0 +1,691 @@
+/*
+ * Copyright (c) 2014 Marvell Technology Group Ltd.
+ *
+ * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ * Alexandre Belloni <alexandre.belloni@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/clock/berlin2.h>
+
+#include "berlin2-avpll.h"
+#include "berlin2-div.h"
+#include "berlin2-pll.h"
+#include "common.h"
+
+#define REG_PINMUX0		0x0000
+#define REG_PINMUX1		0x0004
+#define REG_SYSPLLCTL0		0x0014
+#define REG_SYSPLLCTL4		0x0024
+#define REG_MEMPLLCTL0		0x0028
+#define REG_MEMPLLCTL4		0x0038
+#define REG_CPUPLLCTL0		0x003c
+#define REG_CPUPLLCTL4		0x004c
+#define REG_AVPLLCTL0		0x0050
+#define REG_AVPLLCTL31		0x00cc
+#define REG_AVPLLCTL62		0x0148
+#define REG_PLLSTATUS		0x014c
+#define REG_CLKENABLE		0x0150
+#define REG_CLKSELECT0		0x0154
+#define REG_CLKSELECT1		0x0158
+#define REG_CLKSELECT2		0x015c
+#define REG_CLKSELECT3		0x0160
+#define REG_CLKSWITCH0		0x0164
+#define REG_CLKSWITCH1		0x0168
+#define REG_RESET_TRIGGER	0x0178
+#define REG_RESET_STATUS0	0x017c
+#define REG_RESET_STATUS1	0x0180
+#define REG_SW_GENERIC0		0x0184
+#define REG_SW_GENERIC3		0x0190
+#define REG_PRODUCTID		0x01cc
+#define REG_PRODUCTID_EXT	0x01d0
+#define REG_GFX3DCORE_CLKCTL	0x022c
+#define REG_GFX3DSYS_CLKCTL	0x0230
+#define REG_ARC_CLKCTL		0x0234
+#define REG_VIP_CLKCTL		0x0238
+#define REG_SDIO0XIN_CLKCTL	0x023c
+#define REG_SDIO1XIN_CLKCTL	0x0240
+#define REG_GFX3DEXTRA_CLKCTL	0x0244
+#define REG_GFX3D_RESET		0x0248
+#define REG_GC360_CLKCTL	0x024c
+#define REG_SDIO_DLLMST_CLKCTL	0x0250
+
+/*
+ * BG2/BG2CD SoCs have the following audio/video I/O units:
+ *
+ * audiohd: HDMI TX audio
+ * audio0:  7.1ch TX
+ * audio1:  2ch TX
+ * audio2:  2ch RX
+ * audio3:  SPDIF TX
+ * video0:  HDMI video
+ * video1:  Secondary video
+ * video2:  SD auxiliary video
+ *
+ * There are no external audio clocks (ACLKI0, ACLKI1) and
+ * only one external video clock (VCLKI0).
+ *
+ * Currently missing bits and pieces:
+ * - audio_fast_pll is unknown
+ * - audiohd_pll is unknown
+ * - video0_pll is unknown
+ * - audio[023], audiohd parent pll is assumed to be audio_fast_pll
+ *
+ */
+
+#define	MAX_CLKS 41
+static struct clk *clks[MAX_CLKS];
+static struct clk_onecell_data clk_data;
+static DEFINE_SPINLOCK(lock);
+static void __iomem *gbase;
+
+enum {
+	REFCLK, VIDEO_EXT0,
+	SYSPLL, MEMPLL, CPUPLL,
+	AVPLL_A1, AVPLL_A2, AVPLL_A3, AVPLL_A4,
+	AVPLL_A5, AVPLL_A6, AVPLL_A7, AVPLL_A8,
+	AVPLL_B1, AVPLL_B2, AVPLL_B3, AVPLL_B4,
+	AVPLL_B5, AVPLL_B6, AVPLL_B7, AVPLL_B8,
+	AUDIO1_PLL, AUDIO_FAST_PLL,
+	VIDEO0_PLL, VIDEO0_IN,
+	VIDEO1_PLL, VIDEO1_IN,
+	VIDEO2_PLL, VIDEO2_IN,
+};
+
+static const char *clk_names[] = {
+	[REFCLK]		= "refclk",
+	[VIDEO_EXT0]		= "video_ext0",
+	[SYSPLL]		= "syspll",
+	[MEMPLL]		= "mempll",
+	[CPUPLL]		= "cpupll",
+	[AVPLL_A1]		= "avpll_a1",
+	[AVPLL_A2]		= "avpll_a2",
+	[AVPLL_A3]		= "avpll_a3",
+	[AVPLL_A4]		= "avpll_a4",
+	[AVPLL_A5]		= "avpll_a5",
+	[AVPLL_A6]		= "avpll_a6",
+	[AVPLL_A7]		= "avpll_a7",
+	[AVPLL_A8]		= "avpll_a8",
+	[AVPLL_B1]		= "avpll_b1",
+	[AVPLL_B2]		= "avpll_b2",
+	[AVPLL_B3]		= "avpll_b3",
+	[AVPLL_B4]		= "avpll_b4",
+	[AVPLL_B5]		= "avpll_b5",
+	[AVPLL_B6]		= "avpll_b6",
+	[AVPLL_B7]		= "avpll_b7",
+	[AVPLL_B8]		= "avpll_b8",
+	[AUDIO1_PLL]		= "audio1_pll",
+	[AUDIO_FAST_PLL]	= "audio_fast_pll",
+	[VIDEO0_PLL]		= "video0_pll",
+	[VIDEO0_IN]		= "video0_in",
+	[VIDEO1_PLL]		= "video1_pll",
+	[VIDEO1_IN]		= "video1_in",
+	[VIDEO2_PLL]		= "video2_pll",
+	[VIDEO2_IN]		= "video2_in",
+};
+
+static const struct berlin2_pll_map bg2_pll_map __initconst = {
+	.vcodiv		= {10, 15, 20, 25, 30, 40, 50, 60, 80},
+	.mult		= 10,
+	.fbdiv_shift	= 6,
+	.rfdiv_shift	= 1,
+	.divsel_shift	= 7,
+};
+
+static const u8 default_parent_ids[] = {
+	SYSPLL, AVPLL_B4, AVPLL_A5, AVPLL_B6, AVPLL_B7, SYSPLL
+};
+
+static const struct berlin2_div_data bg2_divs[] __initconst = {
+	{
+		.name = "sys",
+		.parent_ids = (const u8 []){
+			SYSPLL, AVPLL_B4, AVPLL_B5, AVPLL_B6, AVPLL_B7, SYSPLL
+		},
+		.num_parents = 6,
+		.map = {
+			BERLIN2_DIV_GATE(REG_CLKENABLE, 0),
+			BERLIN2_PLL_SELECT(REG_CLKSELECT0, 0),
+			BERLIN2_DIV_SELECT(REG_CLKSELECT0, 3),
+			BERLIN2_PLL_SWITCH(REG_CLKSWITCH0, 3),
+			BERLIN2_DIV_SWITCH(REG_CLKSWITCH0, 4),
+			BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH0, 5),
+		},
+		.div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX,
+		.flags = CLK_IGNORE_UNUSED,
+	},
+	{
+		.name = "cpu",
+		.parent_ids = (const u8 []){
+			CPUPLL, MEMPLL, MEMPLL, MEMPLL, MEMPLL
+		},
+		.num_parents = 5,
+		.map = {
+			BERLIN2_PLL_SELECT(REG_CLKSELECT0, 6),
+			BERLIN2_DIV_SELECT(REG_CLKSELECT0, 9),
+			BERLIN2_PLL_SWITCH(REG_CLKSWITCH0, 6),
+			BERLIN2_DIV_SWITCH(REG_CLKSWITCH0, 7),
+			BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH0, 8),
+		},
+		.div_flags = BERLIN2_DIV_HAS_MUX,
+		.flags = 0,
+	},
+	{
+		.name = "drmfigo",
+		.parent_ids = default_parent_ids,
+		.num_parents = ARRAY_SIZE(default_parent_ids),
+		.map = {
+			BERLIN2_DIV_GATE(REG_CLKENABLE, 16),
+			BERLIN2_PLL_SELECT(REG_CLKSELECT0, 17),
+			BERLIN2_DIV_SELECT(REG_CLKSELECT0, 20),
+			BERLIN2_PLL_SWITCH(REG_CLKSWITCH0, 12),
+			BERLIN2_DIV_SWITCH(REG_CLKSWITCH0, 13),
+			BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH0, 14),
+		},
+		.div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX,
+		.flags = 0,
+	},
+	{
+		.name = "cfg",
+		.parent_ids = default_parent_ids,
+		.num_parents = ARRAY_SIZE(default_parent_ids),
+		.map = {
+			BERLIN2_DIV_GATE(REG_CLKENABLE, 1),
+			BERLIN2_PLL_SELECT(REG_CLKSELECT0, 23),
+			BERLIN2_DIV_SELECT(REG_CLKSELECT0, 26),
+			BERLIN2_PLL_SWITCH(REG_CLKSWITCH0, 15),
+			BERLIN2_DIV_SWITCH(REG_CLKSWITCH0, 16),
+			BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH0, 17),
+		},
+		.div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX,
+		.flags = 0,
+	},
+	{
+		.name = "gfx",
+		.parent_ids = default_parent_ids,
+		.num_parents = ARRAY_SIZE(default_parent_ids),
+		.map = {
+			BERLIN2_DIV_GATE(REG_CLKENABLE, 4),
+			BERLIN2_PLL_SELECT(REG_CLKSELECT0, 29),
+			BERLIN2_DIV_SELECT(REG_CLKSELECT1, 0),
+			BERLIN2_PLL_SWITCH(REG_CLKSWITCH0, 18),
+			BERLIN2_DIV_SWITCH(REG_CLKSWITCH0, 19),
+			BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH0, 20),
+		},
+		.div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX,
+		.flags = 0,
+	},
+	{
+		.name = "zsp",
+		.parent_ids = default_parent_ids,
+		.num_parents = ARRAY_SIZE(default_parent_ids),
+		.map = {
+			BERLIN2_DIV_GATE(REG_CLKENABLE, 5),
+			BERLIN2_PLL_SELECT(REG_CLKSELECT1, 3),
+			BERLIN2_DIV_SELECT(REG_CLKSELECT1, 6),
+			BERLIN2_PLL_SWITCH(REG_CLKSWITCH0, 21),
+			BERLIN2_DIV_SWITCH(REG_CLKSWITCH0, 22),
+			BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH0, 23),
+		},
+		.div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX,
+		.flags = 0,
+	},
+	{
+		.name = "perif",
+		.parent_ids = default_parent_ids,
+		.num_parents = ARRAY_SIZE(default_parent_ids),
+		.map = {
+			BERLIN2_DIV_GATE(REG_CLKENABLE, 6),
+			BERLIN2_PLL_SELECT(REG_CLKSELECT1, 9),
+			BERLIN2_DIV_SELECT(REG_CLKSELECT1, 12),
+			BERLIN2_PLL_SWITCH(REG_CLKSWITCH0, 24),
+			BERLIN2_DIV_SWITCH(REG_CLKSWITCH0, 25),
+			BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH0, 26),
+		},
+		.div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX,
+		.flags = CLK_IGNORE_UNUSED,
+	},
+	{
+		.name = "pcube",
+		.parent_ids = default_parent_ids,
+		.num_parents = ARRAY_SIZE(default_parent_ids),
+		.map = {
+			BERLIN2_DIV_GATE(REG_CLKENABLE, 2),
+			BERLIN2_PLL_SELECT(REG_CLKSELECT1, 15),
+			BERLIN2_DIV_SELECT(REG_CLKSELECT1, 18),
+			BERLIN2_PLL_SWITCH(REG_CLKSWITCH0, 27),
+			BERLIN2_DIV_SWITCH(REG_CLKSWITCH0, 28),
+			BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH0, 29),
+		},
+		.div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX,
+		.flags = 0,
+	},
+	{
+		.name = "vscope",
+		.parent_ids = default_parent_ids,
+		.num_parents = ARRAY_SIZE(default_parent_ids),
+		.map = {
+			BERLIN2_DIV_GATE(REG_CLKENABLE, 3),
+			BERLIN2_PLL_SELECT(REG_CLKSELECT1, 21),
+			BERLIN2_DIV_SELECT(REG_CLKSELECT1, 24),
+			BERLIN2_PLL_SWITCH(REG_CLKSWITCH0, 30),
+			BERLIN2_DIV_SWITCH(REG_CLKSWITCH0, 31),
+			BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH1, 0),
+		},
+		.div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX,
+		.flags = 0,
+	},
+	{
+		.name = "nfc_ecc",
+		.parent_ids = default_parent_ids,
+		.num_parents = ARRAY_SIZE(default_parent_ids),
+		.map = {
+			BERLIN2_DIV_GATE(REG_CLKENABLE, 18),
+			BERLIN2_PLL_SELECT(REG_CLKSELECT1, 27),
+			BERLIN2_DIV_SELECT(REG_CLKSELECT2, 0),
+			BERLIN2_PLL_SWITCH(REG_CLKSWITCH1, 1),
+			BERLIN2_DIV_SWITCH(REG_CLKSWITCH1, 2),
+			BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH1, 3),
+		},
+		.div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX,
+		.flags = 0,
+	},
+	{
+		.name = "vpp",
+		.parent_ids = default_parent_ids,
+		.num_parents = ARRAY_SIZE(default_parent_ids),
+		.map = {
+			BERLIN2_DIV_GATE(REG_CLKENABLE, 21),
+			BERLIN2_PLL_SELECT(REG_CLKSELECT2, 3),
+			BERLIN2_DIV_SELECT(REG_CLKSELECT2, 6),
+			BERLIN2_PLL_SWITCH(REG_CLKSWITCH1, 4),
+			BERLIN2_DIV_SWITCH(REG_CLKSWITCH1, 5),
+			BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH1, 6),
+		},
+		.div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX,
+		.flags = 0,
+	},
+	{
+		.name = "app",
+		.parent_ids = default_parent_ids,
+		.num_parents = ARRAY_SIZE(default_parent_ids),
+		.map = {
+			BERLIN2_DIV_GATE(REG_CLKENABLE, 20),
+			BERLIN2_PLL_SELECT(REG_CLKSELECT2, 9),
+			BERLIN2_DIV_SELECT(REG_CLKSELECT2, 12),
+			BERLIN2_PLL_SWITCH(REG_CLKSWITCH1, 7),
+			BERLIN2_DIV_SWITCH(REG_CLKSWITCH1, 8),
+			BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH1, 9),
+		},
+		.div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX,
+		.flags = 0,
+	},
+	{
+		.name = "audio0",
+		.parent_ids = (const u8 []){ AUDIO_FAST_PLL },
+		.num_parents = 1,
+		.map = {
+			BERLIN2_DIV_GATE(REG_CLKENABLE, 22),
+			BERLIN2_DIV_SELECT(REG_CLKSELECT2, 17),
+			BERLIN2_DIV_SWITCH(REG_CLKSWITCH1, 10),
+			BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH1, 11),
+		},
+		.div_flags = BERLIN2_DIV_HAS_GATE,
+		.flags = 0,
+	},
+	{
+		.name = "audio2",
+		.parent_ids = (const u8 []){ AUDIO_FAST_PLL },
+		.num_parents = 1,
+		.map = {
+			BERLIN2_DIV_GATE(REG_CLKENABLE, 24),
+			BERLIN2_DIV_SELECT(REG_CLKSELECT2, 20),
+			BERLIN2_DIV_SWITCH(REG_CLKSWITCH1, 14),
+			BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH1, 15),
+		},
+		.div_flags = BERLIN2_DIV_HAS_GATE,
+		.flags = 0,
+	},
+	{
+		.name = "audio3",
+		.parent_ids = (const u8 []){ AUDIO_FAST_PLL },
+		.num_parents = 1,
+		.map = {
+			BERLIN2_DIV_GATE(REG_CLKENABLE, 25),
+			BERLIN2_DIV_SELECT(REG_CLKSELECT2, 23),
+			BERLIN2_DIV_SWITCH(REG_CLKSWITCH1, 16),
+			BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH1, 17),
+		},
+		.div_flags = BERLIN2_DIV_HAS_GATE,
+		.flags = 0,
+	},
+	{
+		.name = "audio1",
+		.parent_ids = (const u8 []){ AUDIO1_PLL },
+		.num_parents = 1,
+		.map = {
+			BERLIN2_DIV_GATE(REG_CLKENABLE, 23),
+			BERLIN2_DIV_SELECT(REG_CLKSELECT3, 0),
+			BERLIN2_DIV_SWITCH(REG_CLKSWITCH1, 12),
+			BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH1, 13),
+		},
+		.div_flags = BERLIN2_DIV_HAS_GATE,
+		.flags = 0,
+	},
+	{
+		.name = "gfx3d_core",
+		.parent_ids = default_parent_ids,
+		.num_parents = ARRAY_SIZE(default_parent_ids),
+		.map = {
+			BERLIN2_SINGLE_DIV(REG_GFX3DCORE_CLKCTL),
+		},
+		.div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX,
+		.flags = 0,
+	},
+	{
+		.name = "gfx3d_sys",
+		.parent_ids = default_parent_ids,
+		.num_parents = ARRAY_SIZE(default_parent_ids),
+		.map = {
+			BERLIN2_SINGLE_DIV(REG_GFX3DSYS_CLKCTL),
+		},
+		.div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX,
+		.flags = 0,
+	},
+	{
+		.name = "arc",
+		.parent_ids = default_parent_ids,
+		.num_parents = ARRAY_SIZE(default_parent_ids),
+		.map = {
+			BERLIN2_SINGLE_DIV(REG_ARC_CLKCTL),
+		},
+		.div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX,
+		.flags = 0,
+	},
+	{
+		.name = "vip",
+		.parent_ids = default_parent_ids,
+		.num_parents = ARRAY_SIZE(default_parent_ids),
+		.map = {
+			BERLIN2_SINGLE_DIV(REG_VIP_CLKCTL),
+		},
+		.div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX,
+		.flags = 0,
+	},
+	{
+		.name = "sdio0xin",
+		.parent_ids = default_parent_ids,
+		.num_parents = ARRAY_SIZE(default_parent_ids),
+		.map = {
+			BERLIN2_SINGLE_DIV(REG_SDIO0XIN_CLKCTL),
+		},
+		.div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX,
+		.flags = 0,
+	},
+	{
+		.name = "sdio1xin",
+		.parent_ids = default_parent_ids,
+		.num_parents = ARRAY_SIZE(default_parent_ids),
+		.map = {
+			BERLIN2_SINGLE_DIV(REG_SDIO1XIN_CLKCTL),
+		},
+		.div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX,
+		.flags = 0,
+	},
+	{
+		.name = "gfx3d_extra",
+		.parent_ids = default_parent_ids,
+		.num_parents = ARRAY_SIZE(default_parent_ids),
+		.map = {
+			BERLIN2_SINGLE_DIV(REG_GFX3DEXTRA_CLKCTL),
+		},
+		.div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX,
+		.flags = 0,
+	},
+	{
+		.name = "gc360",
+		.parent_ids = default_parent_ids,
+		.num_parents = ARRAY_SIZE(default_parent_ids),
+		.map = {
+			BERLIN2_SINGLE_DIV(REG_GC360_CLKCTL),
+		},
+		.div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX,
+		.flags = 0,
+	},
+	{
+		.name = "sdio_dllmst",
+		.parent_ids = default_parent_ids,
+		.num_parents = ARRAY_SIZE(default_parent_ids),
+		.map = {
+			BERLIN2_SINGLE_DIV(REG_SDIO_DLLMST_CLKCTL),
+		},
+		.div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX,
+		.flags = 0,
+	},
+};
+
+static const struct berlin2_gate_data bg2_gates[] __initconst = {
+	{ "geth0",	"perif",	7 },
+	{ "geth1",	"perif",	8 },
+	{ "sata",	"perif",	9 },
+	{ "ahbapb",	"perif",	10, CLK_IGNORE_UNUSED },
+	{ "usb0",	"perif",	11 },
+	{ "usb1",	"perif",	12 },
+	{ "pbridge",	"perif",	13, CLK_IGNORE_UNUSED },
+	{ "sdio0",	"perif",	14, CLK_IGNORE_UNUSED },
+	{ "sdio1",	"perif",	15, CLK_IGNORE_UNUSED },
+	{ "nfc",	"perif",	17 },
+	{ "smemc",	"perif",	19 },
+	{ "audiohd",	"audiohd_pll",	26 },
+	{ "video0",	"video0_in",	27 },
+	{ "video1",	"video1_in",	28 },
+	{ "video2",	"video2_in",	29 },
+};
+
+static void __init berlin2_clock_setup(struct device_node *np)
+{
+	const char *parent_names[9];
+	struct clk *clk;
+	u8 avpll_flags = 0;
+	int n;
+
+	gbase = of_iomap(np, 0);
+	if (!gbase)
+		return;
+
+	/* overwrite default clock names with DT provided ones */
+	clk = of_clk_get_by_name(np, clk_names[REFCLK]);
+	if (!IS_ERR(clk)) {
+		clk_names[REFCLK] = __clk_get_name(clk);
+		clk_put(clk);
+	}
+
+	clk = of_clk_get_by_name(np, clk_names[VIDEO_EXT0]);
+	if (!IS_ERR(clk)) {
+		clk_names[VIDEO_EXT0] = __clk_get_name(clk);
+		clk_put(clk);
+	}
+
+	/* simple register PLLs */
+	clk = berlin2_pll_register(&bg2_pll_map, gbase + REG_SYSPLLCTL0,
+				   clk_names[SYSPLL], clk_names[REFCLK], 0);
+	if (IS_ERR(clk))
+		goto bg2_fail;
+
+	clk = berlin2_pll_register(&bg2_pll_map, gbase + REG_MEMPLLCTL0,
+				   clk_names[MEMPLL], clk_names[REFCLK], 0);
+	if (IS_ERR(clk))
+		goto bg2_fail;
+
+	clk = berlin2_pll_register(&bg2_pll_map, gbase + REG_CPUPLLCTL0,
+				   clk_names[CPUPLL], clk_names[REFCLK], 0);
+	if (IS_ERR(clk))
+		goto bg2_fail;
+
+	if (of_device_is_compatible(np, "marvell,berlin2-global-register"))
+		avpll_flags |= BERLIN2_AVPLL_SCRAMBLE_QUIRK;
+
+	/* audio/video VCOs */
+	clk = berlin2_avpll_vco_register(gbase + REG_AVPLLCTL0, "avpll_vcoA",
+			 clk_names[REFCLK], avpll_flags, 0);
+	if (IS_ERR(clk))
+		goto bg2_fail;
+
+	for (n = 0; n < 8; n++) {
+		clk = berlin2_avpll_channel_register(gbase + REG_AVPLLCTL0,
+			     clk_names[AVPLL_A1 + n], n, "avpll_vcoA",
+			     avpll_flags, 0);
+		if (IS_ERR(clk))
+			goto bg2_fail;
+	}
+
+	clk = berlin2_avpll_vco_register(gbase + REG_AVPLLCTL31, "avpll_vcoB",
+				 clk_names[REFCLK], BERLIN2_AVPLL_BIT_QUIRK |
+				 avpll_flags, 0);
+	if (IS_ERR(clk))
+		goto bg2_fail;
+
+	for (n = 0; n < 8; n++) {
+		clk = berlin2_avpll_channel_register(gbase + REG_AVPLLCTL31,
+			     clk_names[AVPLL_B1 + n], n, "avpll_vcoB",
+			     BERLIN2_AVPLL_BIT_QUIRK | avpll_flags, 0);
+		if (IS_ERR(clk))
+			goto bg2_fail;
+	}
+
+	/* reference clock bypass switches */
+	parent_names[0] = clk_names[SYSPLL];
+	parent_names[1] = clk_names[REFCLK];
+	clk = clk_register_mux(NULL, "syspll_byp", parent_names, 2,
+			       0, gbase + REG_CLKSWITCH0, 0, 1, 0, &lock);
+	if (IS_ERR(clk))
+		goto bg2_fail;
+	clk_names[SYSPLL] = __clk_get_name(clk);
+
+	parent_names[0] = clk_names[MEMPLL];
+	parent_names[1] = clk_names[REFCLK];
+	clk = clk_register_mux(NULL, "mempll_byp", parent_names, 2,
+			       0, gbase + REG_CLKSWITCH0, 1, 1, 0, &lock);
+	if (IS_ERR(clk))
+		goto bg2_fail;
+	clk_names[MEMPLL] = __clk_get_name(clk);
+
+	parent_names[0] = clk_names[CPUPLL];
+	parent_names[1] = clk_names[REFCLK];
+	clk = clk_register_mux(NULL, "cpupll_byp", parent_names, 2,
+			       0, gbase + REG_CLKSWITCH0, 2, 1, 0, &lock);
+	if (IS_ERR(clk))
+		goto bg2_fail;
+	clk_names[CPUPLL] = __clk_get_name(clk);
+
+	/* clock muxes */
+	parent_names[0] = clk_names[AVPLL_B3];
+	parent_names[1] = clk_names[AVPLL_A3];
+	clk = clk_register_mux(NULL, clk_names[AUDIO1_PLL], parent_names, 2,
+			       0, gbase + REG_CLKSELECT2, 29, 1, 0, &lock);
+	if (IS_ERR(clk))
+		goto bg2_fail;
+
+	parent_names[0] = clk_names[VIDEO0_PLL];
+	parent_names[1] = clk_names[VIDEO_EXT0];
+	clk = clk_register_mux(NULL, clk_names[VIDEO0_IN], parent_names, 2,
+			       0, gbase + REG_CLKSELECT3, 4, 1, 0, &lock);
+	if (IS_ERR(clk))
+		goto bg2_fail;
+
+	parent_names[0] = clk_names[VIDEO1_PLL];
+	parent_names[1] = clk_names[VIDEO_EXT0];
+	clk = clk_register_mux(NULL, clk_names[VIDEO1_IN], parent_names, 2,
+			       0, gbase + REG_CLKSELECT3, 6, 1, 0, &lock);
+	if (IS_ERR(clk))
+		goto bg2_fail;
+
+	parent_names[0] = clk_names[AVPLL_A2];
+	parent_names[1] = clk_names[AVPLL_B2];
+	clk = clk_register_mux(NULL, clk_names[VIDEO1_PLL], parent_names, 2,
+			       0, gbase + REG_CLKSELECT3, 7, 1, 0, &lock);
+	if (IS_ERR(clk))
+		goto bg2_fail;
+
+	parent_names[0] = clk_names[VIDEO2_PLL];
+	parent_names[1] = clk_names[VIDEO_EXT0];
+	clk = clk_register_mux(NULL, clk_names[VIDEO2_IN], parent_names, 2,
+			       0, gbase + REG_CLKSELECT3, 9, 1, 0, &lock);
+	if (IS_ERR(clk))
+		goto bg2_fail;
+
+	parent_names[0] = clk_names[AVPLL_B1];
+	parent_names[1] = clk_names[AVPLL_A5];
+	clk = clk_register_mux(NULL, clk_names[VIDEO2_PLL], parent_names, 2,
+			       0, gbase + REG_CLKSELECT3, 10, 1, 0, &lock);
+	if (IS_ERR(clk))
+		goto bg2_fail;
+
+	/* clock divider cells */
+	for (n = 0; n < ARRAY_SIZE(bg2_divs); n++) {
+		const struct berlin2_div_data *dd = &bg2_divs[n];
+		int k;
+
+		for (k = 0; k < dd->num_parents; k++)
+			parent_names[k] = clk_names[dd->parent_ids[k]];
+
+		clks[CLKID_SYS + n] = berlin2_div_register(&dd->map, gbase,
+				dd->name, dd->div_flags, parent_names,
+				dd->num_parents, dd->flags, &lock);
+	}
+
+	/* clock gate cells */
+	for (n = 0; n < ARRAY_SIZE(bg2_gates); n++) {
+		const struct berlin2_gate_data *gd = &bg2_gates[n];
+
+		clks[CLKID_GETH0 + n] = clk_register_gate(NULL, gd->name,
+			    gd->parent_name, gd->flags, gbase + REG_CLKENABLE,
+			    gd->bit_idx, 0, &lock);
+	}
+
+	/* twdclk is derived from cpu/3 */
+	clks[CLKID_TWD] =
+		clk_register_fixed_factor(NULL, "twd", "cpu", 0, 1, 3);
+
+	/* check for errors on leaf clocks */
+	for (n = 0; n < MAX_CLKS; n++) {
+		if (!IS_ERR(clks[n]))
+			continue;
+
+		pr_err("%s: Unable to register leaf clock %d\n",
+		       np->full_name, n);
+		goto bg2_fail;
+	}
+
+	/* register clk-provider */
+	clk_data.clks = clks;
+	clk_data.clk_num = MAX_CLKS;
+	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+
+	return;
+
+bg2_fail:
+	iounmap(gbase);
+}
+CLK_OF_DECLARE(berlin2_clock, "marvell,berlin2-chip-ctrl",
+	       berlin2_clock_setup);
+CLK_OF_DECLARE(berlin2cd_clock, "marvell,berlin2cd-chip-ctrl",
+	       berlin2_clock_setup);
diff --git a/drivers/clk/berlin/common.h b/drivers/clk/berlin/common.h
new file mode 100644
index 000000000000..bc68a14c4550
--- /dev/null
+++ b/drivers/clk/berlin/common.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright (c) 2014 Marvell Technology Group Ltd.
+ *
+ * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ * Alexandre Belloni <alexandre.belloni@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __BERLIN2_COMMON_H
+#define __BERLIN2_COMMON_H
+
+struct berlin2_gate_data {
+	const char *name;
+	const char *parent_name;
+	u8 bit_idx;
+	unsigned long flags;
+};
+
+#endif /* BERLIN2_COMMON_H */
-- 
cgit v1.2.3


From 18882ac5f38ec44e070c68728c2635bcdf60915f Mon Sep 17 00:00:00 2001
From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Date: Mon, 19 May 2014 18:43:28 +0200
Subject: clk: berlin: add core clock driver for BG2Q

This driver deals with the core clocks found on Marvell Berlin BG2Q. For the
shared register dividers, make use of the corresponding driver and add some
single clock muxes and gates for the rest.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/berlin/Makefile |   1 +
 drivers/clk/berlin/bg2q.c   | 389 ++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 390 insertions(+)
 create mode 100644 drivers/clk/berlin/bg2q.c

(limited to 'drivers')

diff --git a/drivers/clk/berlin/Makefile b/drivers/clk/berlin/Makefile
index 2b33e1e74503..2a36ab710a07 100644
--- a/drivers/clk/berlin/Makefile
+++ b/drivers/clk/berlin/Makefile
@@ -1,3 +1,4 @@
 obj-y += berlin2-avpll.o berlin2-pll.o berlin2-div.o
 obj-$(CONFIG_MACH_BERLIN_BG2)	+= bg2.o
 obj-$(CONFIG_MACH_BERLIN_BG2CD)	+= bg2.o
+obj-$(CONFIG_MACH_BERLIN_BG2Q)	+= bg2q.o
diff --git a/drivers/clk/berlin/bg2q.c b/drivers/clk/berlin/bg2q.c
new file mode 100644
index 000000000000..21784e4eb3f0
--- /dev/null
+++ b/drivers/clk/berlin/bg2q.c
@@ -0,0 +1,389 @@
+/*
+ * Copyright (c) 2014 Marvell Technology Group Ltd.
+ *
+ * Alexandre Belloni <alexandre.belloni@free-electrons.com>
+ * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/clock/berlin2q.h>
+
+#include "berlin2-div.h"
+#include "berlin2-pll.h"
+#include "common.h"
+
+#define REG_PINMUX0		0x0018
+#define REG_PINMUX5		0x002c
+#define REG_SYSPLLCTL0		0x0030
+#define REG_SYSPLLCTL4		0x0040
+#define REG_CLKENABLE		0x00e8
+#define REG_CLKSELECT0		0x00ec
+#define REG_CLKSELECT1		0x00f0
+#define REG_CLKSELECT2		0x00f4
+#define REG_CLKSWITCH0		0x00f8
+#define REG_CLKSWITCH1		0x00fc
+#define REG_SW_GENERIC0		0x0110
+#define REG_SW_GENERIC3		0x011c
+#define REG_SDIO0XIN_CLKCTL	0x0158
+#define REG_SDIO1XIN_CLKCTL	0x015c
+
+#define	MAX_CLKS 27
+static struct clk *clks[MAX_CLKS];
+static struct clk_onecell_data clk_data;
+static DEFINE_SPINLOCK(lock);
+static void __iomem *gbase;
+static void __iomem *cpupll_base;
+
+enum {
+	REFCLK,
+	SYSPLL, CPUPLL,
+	AVPLL_B1, AVPLL_B2, AVPLL_B3, AVPLL_B4,
+	AVPLL_B5, AVPLL_B6, AVPLL_B7, AVPLL_B8,
+};
+
+static const char *clk_names[] = {
+	[REFCLK]		= "refclk",
+	[SYSPLL]		= "syspll",
+	[CPUPLL]		= "cpupll",
+	[AVPLL_B1]		= "avpll_b1",
+	[AVPLL_B2]		= "avpll_b2",
+	[AVPLL_B3]		= "avpll_b3",
+	[AVPLL_B4]		= "avpll_b4",
+	[AVPLL_B5]		= "avpll_b5",
+	[AVPLL_B6]		= "avpll_b6",
+	[AVPLL_B7]		= "avpll_b7",
+	[AVPLL_B8]		= "avpll_b8",
+};
+
+static const struct berlin2_pll_map bg2q_pll_map __initconst = {
+	.vcodiv		= {1, 0, 2, 0, 3, 4, 0, 6, 8},
+	.mult		= 1,
+	.fbdiv_shift	= 7,
+	.rfdiv_shift	= 2,
+	.divsel_shift	= 9,
+};
+
+static const u8 default_parent_ids[] = {
+	SYSPLL, AVPLL_B4, AVPLL_B5, AVPLL_B6, AVPLL_B7, SYSPLL
+};
+
+static const struct berlin2_div_data bg2q_divs[] __initconst = {
+	{
+		.name = "sys",
+		.parent_ids = default_parent_ids,
+		.num_parents = ARRAY_SIZE(default_parent_ids),
+		.map = {
+			BERLIN2_DIV_GATE(REG_CLKENABLE, 0),
+			BERLIN2_PLL_SELECT(REG_CLKSELECT0, 0),
+			BERLIN2_DIV_SELECT(REG_CLKSELECT0, 3),
+			BERLIN2_PLL_SWITCH(REG_CLKSWITCH0, 3),
+			BERLIN2_DIV_SWITCH(REG_CLKSWITCH0, 4),
+			BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH0, 5),
+		},
+		.div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX,
+		.flags = CLK_IGNORE_UNUSED,
+	},
+	{
+		.name = "drmfigo",
+		.parent_ids = default_parent_ids,
+		.num_parents = ARRAY_SIZE(default_parent_ids),
+		.map = {
+			BERLIN2_DIV_GATE(REG_CLKENABLE, 17),
+			BERLIN2_PLL_SELECT(REG_CLKSELECT0, 6),
+			BERLIN2_DIV_SELECT(REG_CLKSELECT0, 9),
+			BERLIN2_PLL_SWITCH(REG_CLKSWITCH0, 6),
+			BERLIN2_DIV_SWITCH(REG_CLKSWITCH0, 7),
+			BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH0, 8),
+		},
+		.div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX,
+		.flags = 0,
+	},
+	{
+		.name = "cfg",
+		.parent_ids = default_parent_ids,
+		.num_parents = ARRAY_SIZE(default_parent_ids),
+		.map = {
+			BERLIN2_DIV_GATE(REG_CLKENABLE, 1),
+			BERLIN2_PLL_SELECT(REG_CLKSELECT0, 12),
+			BERLIN2_DIV_SELECT(REG_CLKSELECT0, 15),
+			BERLIN2_PLL_SWITCH(REG_CLKSWITCH0, 9),
+			BERLIN2_DIV_SWITCH(REG_CLKSWITCH0, 10),
+			BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH0, 11),
+		},
+		.div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX,
+		.flags = 0,
+	},
+	{
+		.name = "gfx2d",
+		.parent_ids = default_parent_ids,
+		.num_parents = ARRAY_SIZE(default_parent_ids),
+		.map = {
+			BERLIN2_DIV_GATE(REG_CLKENABLE, 4),
+			BERLIN2_PLL_SELECT(REG_CLKSELECT0, 18),
+			BERLIN2_DIV_SELECT(REG_CLKSELECT0, 21),
+			BERLIN2_PLL_SWITCH(REG_CLKSWITCH0, 12),
+			BERLIN2_DIV_SWITCH(REG_CLKSWITCH0, 13),
+			BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH0, 14),
+		},
+		.div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX,
+		.flags = 0,
+	},
+	{
+		.name = "zsp",
+		.parent_ids = default_parent_ids,
+		.num_parents = ARRAY_SIZE(default_parent_ids),
+		.map = {
+			BERLIN2_DIV_GATE(REG_CLKENABLE, 6),
+			BERLIN2_PLL_SELECT(REG_CLKSELECT0, 24),
+			BERLIN2_DIV_SELECT(REG_CLKSELECT0, 27),
+			BERLIN2_PLL_SWITCH(REG_CLKSWITCH0, 15),
+			BERLIN2_DIV_SWITCH(REG_CLKSWITCH0, 16),
+			BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH0, 17),
+		},
+		.div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX,
+		.flags = 0,
+	},
+	{
+		.name = "perif",
+		.parent_ids = default_parent_ids,
+		.num_parents = ARRAY_SIZE(default_parent_ids),
+		.map = {
+			BERLIN2_DIV_GATE(REG_CLKENABLE, 7),
+			BERLIN2_PLL_SELECT(REG_CLKSELECT1, 0),
+			BERLIN2_DIV_SELECT(REG_CLKSELECT1, 3),
+			BERLIN2_PLL_SWITCH(REG_CLKSWITCH0, 18),
+			BERLIN2_DIV_SWITCH(REG_CLKSWITCH0, 19),
+			BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH0, 20),
+		},
+		.div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX,
+		.flags = CLK_IGNORE_UNUSED,
+	},
+	{
+		.name = "pcube",
+		.parent_ids = default_parent_ids,
+		.num_parents = ARRAY_SIZE(default_parent_ids),
+		.map = {
+			BERLIN2_DIV_GATE(REG_CLKENABLE, 2),
+			BERLIN2_PLL_SELECT(REG_CLKSELECT1, 6),
+			BERLIN2_DIV_SELECT(REG_CLKSELECT1, 9),
+			BERLIN2_PLL_SWITCH(REG_CLKSWITCH0, 21),
+			BERLIN2_DIV_SWITCH(REG_CLKSWITCH0, 22),
+			BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH0, 23),
+		},
+		.div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX,
+		.flags = 0,
+	},
+	{
+		.name = "vscope",
+		.parent_ids = default_parent_ids,
+		.num_parents = ARRAY_SIZE(default_parent_ids),
+		.map = {
+			BERLIN2_DIV_GATE(REG_CLKENABLE, 3),
+			BERLIN2_PLL_SELECT(REG_CLKSELECT1, 12),
+			BERLIN2_DIV_SELECT(REG_CLKSELECT1, 15),
+			BERLIN2_PLL_SWITCH(REG_CLKSWITCH0, 24),
+			BERLIN2_DIV_SWITCH(REG_CLKSWITCH0, 25),
+			BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH0, 26),
+		},
+		.div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX,
+		.flags = 0,
+	},
+	{
+		.name = "nfc_ecc",
+		.parent_ids = default_parent_ids,
+		.num_parents = ARRAY_SIZE(default_parent_ids),
+		.map = {
+			BERLIN2_DIV_GATE(REG_CLKENABLE, 19),
+			BERLIN2_PLL_SELECT(REG_CLKSELECT1, 18),
+			BERLIN2_DIV_SELECT(REG_CLKSELECT1, 21),
+			BERLIN2_PLL_SWITCH(REG_CLKSWITCH0, 27),
+			BERLIN2_DIV_SWITCH(REG_CLKSWITCH0, 28),
+			BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH0, 29),
+		},
+		.div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX,
+		.flags = 0,
+	},
+	{
+		.name = "vpp",
+		.parent_ids = default_parent_ids,
+		.num_parents = ARRAY_SIZE(default_parent_ids),
+		.map = {
+			BERLIN2_DIV_GATE(REG_CLKENABLE, 21),
+			BERLIN2_PLL_SELECT(REG_CLKSELECT1, 24),
+			BERLIN2_DIV_SELECT(REG_CLKSELECT1, 27),
+			BERLIN2_PLL_SWITCH(REG_CLKSWITCH0, 30),
+			BERLIN2_DIV_SWITCH(REG_CLKSWITCH0, 31),
+			BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH1, 0),
+		},
+		.div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX,
+		.flags = 0,
+	},
+	{
+		.name = "app",
+		.parent_ids = default_parent_ids,
+		.num_parents = ARRAY_SIZE(default_parent_ids),
+		.map = {
+			BERLIN2_DIV_GATE(REG_CLKENABLE, 20),
+			BERLIN2_PLL_SELECT(REG_CLKSELECT2, 0),
+			BERLIN2_DIV_SELECT(REG_CLKSELECT2, 3),
+			BERLIN2_PLL_SWITCH(REG_CLKSWITCH1, 1),
+			BERLIN2_DIV_SWITCH(REG_CLKSWITCH1, 2),
+			BERLIN2_DIV_D3SWITCH(REG_CLKSWITCH1, 3),
+		},
+		.div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX,
+		.flags = 0,
+	},
+	{
+		.name = "sdio0xin",
+		.parent_ids = default_parent_ids,
+		.num_parents = ARRAY_SIZE(default_parent_ids),
+		.map = {
+			BERLIN2_SINGLE_DIV(REG_SDIO0XIN_CLKCTL),
+		},
+		.div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX,
+		.flags = 0,
+	},
+	{
+		.name = "sdio1xin",
+		.parent_ids = default_parent_ids,
+		.num_parents = ARRAY_SIZE(default_parent_ids),
+		.map = {
+			BERLIN2_SINGLE_DIV(REG_SDIO1XIN_CLKCTL),
+		},
+		.div_flags = BERLIN2_DIV_HAS_GATE | BERLIN2_DIV_HAS_MUX,
+		.flags = 0,
+	},
+};
+
+static const struct berlin2_gate_data bg2q_gates[] __initconst = {
+	{ "gfx2daxi",	"perif",	5 },
+	{ "geth0",	"perif",	8 },
+	{ "sata",	"perif",	9 },
+	{ "ahbapb",	"perif",	10, CLK_IGNORE_UNUSED },
+	{ "usb0",	"perif",	11 },
+	{ "usb1",	"perif",	12 },
+	{ "usb2",	"perif",	13 },
+	{ "usb3",	"perif",	14 },
+	{ "pbridge",	"perif",	15, CLK_IGNORE_UNUSED },
+	{ "sdio",	"perif",	16, CLK_IGNORE_UNUSED },
+	{ "nfc",	"perif",	18 },
+	{ "smemc",	"perif",	19 },
+	{ "pcie",	"perif",	22 },
+};
+
+static void __init berlin2q_clock_setup(struct device_node *np)
+{
+	const char *parent_names[9];
+	struct clk *clk;
+	int n;
+
+	gbase = of_iomap(np, 0);
+	if (!gbase) {
+		pr_err("%s: Unable to map global base\n", np->full_name);
+		return;
+	}
+
+	/* BG2Q CPU PLL is not part of global registers */
+	cpupll_base = of_iomap(np, 1);
+	if (!cpupll_base) {
+		pr_err("%s: Unable to map cpupll base\n", np->full_name);
+		iounmap(gbase);
+		return;
+	}
+
+	/* overwrite default clock names with DT provided ones */
+	clk = of_clk_get_by_name(np, clk_names[REFCLK]);
+	if (!IS_ERR(clk)) {
+		clk_names[REFCLK] = __clk_get_name(clk);
+		clk_put(clk);
+	}
+
+	/* simple register PLLs */
+	clk = berlin2_pll_register(&bg2q_pll_map, gbase + REG_SYSPLLCTL0,
+				   clk_names[SYSPLL], clk_names[REFCLK], 0);
+	if (IS_ERR(clk))
+		goto bg2q_fail;
+
+	clk = berlin2_pll_register(&bg2q_pll_map, cpupll_base,
+				   clk_names[CPUPLL], clk_names[REFCLK], 0);
+	if (IS_ERR(clk))
+		goto bg2q_fail;
+
+	/* TODO: add BG2Q AVPLL */
+
+	/*
+	 * TODO: add reference clock bypass switches:
+	 * memPLLSWBypass, cpuPLLSWBypass, and sysPLLSWBypass
+	 */
+
+	/* clock divider cells */
+	for (n = 0; n < ARRAY_SIZE(bg2q_divs); n++) {
+		const struct berlin2_div_data *dd = &bg2q_divs[n];
+		int k;
+
+		for (k = 0; k < dd->num_parents; k++)
+			parent_names[k] = clk_names[dd->parent_ids[k]];
+
+		clks[CLKID_SYS + n] = berlin2_div_register(&dd->map, gbase,
+				dd->name, dd->div_flags, parent_names,
+				dd->num_parents, dd->flags, &lock);
+	}
+
+	/* clock gate cells */
+	for (n = 0; n < ARRAY_SIZE(bg2q_gates); n++) {
+		const struct berlin2_gate_data *gd = &bg2q_gates[n];
+
+		clks[CLKID_GFX2DAXI + n] = clk_register_gate(NULL, gd->name,
+			    gd->parent_name, gd->flags, gbase + REG_CLKENABLE,
+			    gd->bit_idx, 0, &lock);
+	}
+
+	/*
+	 * twdclk is derived from cpu/3
+	 * TODO: use cpupll until cpuclk is not available
+	 */
+	clks[CLKID_TWD] =
+		clk_register_fixed_factor(NULL, "twd", clk_names[CPUPLL],
+					  0, 1, 3);
+
+	/* check for errors on leaf clocks */
+	for (n = 0; n < MAX_CLKS; n++) {
+		if (!IS_ERR(clks[n]))
+			continue;
+
+		pr_err("%s: Unable to register leaf clock %d\n",
+		       np->full_name, n);
+		goto bg2q_fail;
+	}
+
+	/* register clk-provider */
+	clk_data.clks = clks;
+	clk_data.clk_num = MAX_CLKS;
+	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+
+	return;
+
+bg2q_fail:
+	iounmap(cpupll_base);
+	iounmap(gbase);
+}
+CLK_OF_DECLARE(berlin2q_clock, "marvell,berlin2q-chip-ctrl",
+	       berlin2q_clock_setup);
-- 
cgit v1.2.3


From aa014149ba002155a084ec1e9328e95b70167cbb Mon Sep 17 00:00:00 2001
From: Stephen Boyd <sboyd@codeaurora.org>
Date: Fri, 16 May 2014 16:07:08 -0700
Subject: clk: qcom: Fix clk_rcg2_is_enabled() check

If the bit is set the clock is off so we should be checking for
a clear bit, not a set bit. Invert the logic.

Fixes: bcd61c0f535a (clk: qcom: Add support for root clock generators (RCGs))
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/qcom/clk-rcg2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/clk/qcom/clk-rcg2.c b/drivers/clk/qcom/clk-rcg2.c
index 00f878a04d3f..0996a3a39855 100644
--- a/drivers/clk/qcom/clk-rcg2.c
+++ b/drivers/clk/qcom/clk-rcg2.c
@@ -55,7 +55,7 @@ static int clk_rcg2_is_enabled(struct clk_hw *hw)
 	if (ret)
 		return ret;
 
-	return (cmd & CMD_ROOT_OFF) != 0;
+	return (cmd & CMD_ROOT_OFF) == 0;
 }
 
 static u8 clk_rcg2_get_parent(struct clk_hw *hw)
-- 
cgit v1.2.3


From 437ae6a1b8f2eedebfbf0f6572e19ca5c58a3f71 Mon Sep 17 00:00:00 2001
From: Stephen Boyd <sboyd@codeaurora.org>
Date: Fri, 16 May 2014 16:07:09 -0700
Subject: clk: qcom: Fix mmcc-8974's PLL configurations

We forgot to add the status bit for the PLLs and we were using
the wrong register and masks for configuration, leading to
unexpected PLL configurations. Fix this.

Fixes: d8b212014e69 (clk: qcom: Add support for MSM8974's multimedia clock controller (MMCC))
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/qcom/mmcc-msm8974.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

(limited to 'drivers')

diff --git a/drivers/clk/qcom/mmcc-msm8974.c b/drivers/clk/qcom/mmcc-msm8974.c
index 60b7c24a5cd6..62200bbc759e 100644
--- a/drivers/clk/qcom/mmcc-msm8974.c
+++ b/drivers/clk/qcom/mmcc-msm8974.c
@@ -170,6 +170,7 @@ static struct clk_pll mmpll0 = {
 	.config_reg = 0x0014,
 	.mode_reg = 0x0000,
 	.status_reg = 0x001c,
+	.status_bit = 17,
         .clkr.hw.init = &(struct clk_init_data){
                 .name = "mmpll0",
                 .parent_names = (const char *[]){ "xo" },
@@ -193,9 +194,10 @@ static struct clk_pll mmpll1 = {
 	.l_reg = 0x0044,
 	.m_reg = 0x0048,
 	.n_reg = 0x004c,
-	.config_reg = 0x0054,
+	.config_reg = 0x0050,
 	.mode_reg = 0x0040,
 	.status_reg = 0x005c,
+	.status_bit = 17,
         .clkr.hw.init = &(struct clk_init_data){
                 .name = "mmpll1",
                 .parent_names = (const char *[]){ "xo" },
@@ -219,7 +221,7 @@ static struct clk_pll mmpll2 = {
 	.l_reg = 0x4104,
 	.m_reg = 0x4108,
 	.n_reg = 0x410c,
-	.config_reg = 0x4114,
+	.config_reg = 0x4110,
 	.mode_reg = 0x4100,
 	.status_reg = 0x411c,
         .clkr.hw.init = &(struct clk_init_data){
@@ -234,9 +236,10 @@ static struct clk_pll mmpll3 = {
 	.l_reg = 0x0084,
 	.m_reg = 0x0088,
 	.n_reg = 0x008c,
-	.config_reg = 0x0094,
+	.config_reg = 0x0090,
 	.mode_reg = 0x0080,
 	.status_reg = 0x009c,
+	.status_bit = 17,
         .clkr.hw.init = &(struct clk_init_data){
                 .name = "mmpll3",
                 .parent_names = (const char *[]){ "xo" },
@@ -2319,7 +2322,7 @@ static const struct pll_config mmpll1_config = {
 	.vco_val = 0x0,
 	.vco_mask = 0x3 << 20,
 	.pre_div_val = 0x0,
-	.pre_div_mask = 0x3 << 12,
+	.pre_div_mask = 0x7 << 12,
 	.post_div_val = 0x0,
 	.post_div_mask = 0x3 << 8,
 	.mn_ena_mask = BIT(24),
@@ -2333,7 +2336,7 @@ static struct pll_config mmpll3_config = {
 	.vco_val = 0x0,
 	.vco_mask = 0x3 << 20,
 	.pre_div_val = 0x0,
-	.pre_div_mask = 0x3 << 12,
+	.pre_div_mask = 0x7 << 12,
 	.post_div_val = 0x0,
 	.post_div_mask = 0x3 << 8,
 	.mn_ena_mask = BIT(24),
-- 
cgit v1.2.3


From 9d011f3b71f635ff8e664e7e32bb764918cb1e8e Mon Sep 17 00:00:00 2001
From: Stephen Boyd <sboyd@codeaurora.org>
Date: Fri, 16 May 2014 16:07:10 -0700
Subject: clk: qcom: Return highest rate when round_rate() exceeds plan

Some drivers may want to call clk_set_rate() with a very large
number to force the clock to go as fast as it possibly can
without having to know the range between the highest rate and
second highest rate. Add support for this by defaulting to the
highest rate in the frequency table if we can't find a frequency
greater than what is requested.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/qcom/clk-rcg2.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/clk/qcom/clk-rcg2.c b/drivers/clk/qcom/clk-rcg2.c
index 0996a3a39855..cbecaec30562 100644
--- a/drivers/clk/qcom/clk-rcg2.c
+++ b/drivers/clk/qcom/clk-rcg2.c
@@ -181,7 +181,8 @@ struct freq_tbl *find_freq(const struct freq_tbl *f, unsigned long rate)
 		if (rate <= f->freq)
 			return f;
 
-	return NULL;
+	/* Default to our fastest rate */
+	return f - 1;
 }
 
 static long _freq_tbl_determine_rate(struct clk_hw *hw,
-- 
cgit v1.2.3


From 99cbd064b059f222c8839ba433a68b2d6ee33066 Mon Sep 17 00:00:00 2001
From: Stephen Boyd <sboyd@codeaurora.org>
Date: Fri, 16 May 2014 16:07:11 -0700
Subject: clk: qcom: Support display RCG clocks

Add support for the DSI/EDP/HDMI RCG clocks. With the proper
display driver in place this should allow us to support display
clocks on msm8974 based devices.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/qcom/clk-rcg.h  |   3 +
 drivers/clk/qcom/clk-rcg2.c | 299 +++++++++++++++++++++++++++++++++++++++++---
 2 files changed, 287 insertions(+), 15 deletions(-)

(limited to 'drivers')

diff --git a/drivers/clk/qcom/clk-rcg.h b/drivers/clk/qcom/clk-rcg.h
index 1d6b6dece328..b9ec11dfd1b4 100644
--- a/drivers/clk/qcom/clk-rcg.h
+++ b/drivers/clk/qcom/clk-rcg.h
@@ -155,5 +155,8 @@ struct clk_rcg2 {
 #define to_clk_rcg2(_hw) container_of(to_clk_regmap(_hw), struct clk_rcg2, clkr)
 
 extern const struct clk_ops clk_rcg2_ops;
+extern const struct clk_ops clk_edp_pixel_ops;
+extern const struct clk_ops clk_byte_ops;
+extern const struct clk_ops clk_pixel_ops;
 
 #endif
diff --git a/drivers/clk/qcom/clk-rcg2.c b/drivers/clk/qcom/clk-rcg2.c
index cbecaec30562..cd185d5cc67a 100644
--- a/drivers/clk/qcom/clk-rcg2.c
+++ b/drivers/clk/qcom/clk-rcg2.c
@@ -19,6 +19,7 @@
 #include <linux/clk-provider.h>
 #include <linux/delay.h>
 #include <linux/regmap.h>
+#include <linux/math64.h>
 
 #include <asm/div64.h>
 
@@ -225,31 +226,25 @@ static long clk_rcg2_determine_rate(struct clk_hw *hw, unsigned long rate,
 	return _freq_tbl_determine_rate(hw, rcg->freq_tbl, rate, p_rate, p);
 }
 
-static int __clk_rcg2_set_rate(struct clk_hw *hw, unsigned long rate)
+static int clk_rcg2_configure(struct clk_rcg2 *rcg, const struct freq_tbl *f)
 {
-	struct clk_rcg2 *rcg = to_clk_rcg2(hw);
-	const struct freq_tbl *f;
 	u32 cfg, mask;
 	int ret;
 
-	f = find_freq(rcg->freq_tbl, rate);
-	if (!f)
-		return -EINVAL;
-
 	if (rcg->mnd_width && f->n) {
 		mask = BIT(rcg->mnd_width) - 1;
-		ret = regmap_update_bits(rcg->clkr.regmap, rcg->cmd_rcgr + M_REG,
-					 mask, f->m);
+		ret = regmap_update_bits(rcg->clkr.regmap,
+				rcg->cmd_rcgr + M_REG, mask, f->m);
 		if (ret)
 			return ret;
 
-		ret = regmap_update_bits(rcg->clkr.regmap, rcg->cmd_rcgr + N_REG,
-					 mask, ~(f->n - f->m));
+		ret = regmap_update_bits(rcg->clkr.regmap,
+				rcg->cmd_rcgr + N_REG, mask, ~(f->n - f->m));
 		if (ret)
 			return ret;
 
-		ret = regmap_update_bits(rcg->clkr.regmap, rcg->cmd_rcgr + D_REG,
-					 mask, ~f->n);
+		ret = regmap_update_bits(rcg->clkr.regmap,
+				rcg->cmd_rcgr + D_REG, mask, ~f->n);
 		if (ret)
 			return ret;
 	}
@@ -260,14 +255,26 @@ static int __clk_rcg2_set_rate(struct clk_hw *hw, unsigned long rate)
 	cfg |= rcg->parent_map[f->src] << CFG_SRC_SEL_SHIFT;
 	if (rcg->mnd_width && f->n)
 		cfg |= CFG_MODE_DUAL_EDGE;
-	ret = regmap_update_bits(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG, mask,
-			cfg);
+	ret = regmap_update_bits(rcg->clkr.regmap,
+			rcg->cmd_rcgr + CFG_REG, mask, cfg);
 	if (ret)
 		return ret;
 
 	return update_config(rcg);
 }
 
+static int __clk_rcg2_set_rate(struct clk_hw *hw, unsigned long rate)
+{
+	struct clk_rcg2 *rcg = to_clk_rcg2(hw);
+	const struct freq_tbl *f;
+
+	f = find_freq(rcg->freq_tbl, rate);
+	if (!f)
+		return -EINVAL;
+
+	return clk_rcg2_configure(rcg, f);
+}
+
 static int clk_rcg2_set_rate(struct clk_hw *hw, unsigned long rate,
 			    unsigned long parent_rate)
 {
@@ -290,3 +297,265 @@ const struct clk_ops clk_rcg2_ops = {
 	.set_rate_and_parent = clk_rcg2_set_rate_and_parent,
 };
 EXPORT_SYMBOL_GPL(clk_rcg2_ops);
+
+struct frac_entry {
+	int num;
+	int den;
+};
+
+static const struct frac_entry frac_table_675m[] = {	/* link rate of 270M */
+	{ 52, 295 },	/* 119 M */
+	{ 11, 57 },	/* 130.25 M */
+	{ 63, 307 },	/* 138.50 M */
+	{ 11, 50 },	/* 148.50 M */
+	{ 47, 206 },	/* 154 M */
+	{ 31, 100 },	/* 205.25 M */
+	{ 107, 269 },	/* 268.50 M */
+	{ },
+};
+
+static struct frac_entry frac_table_810m[] = { /* Link rate of 162M */
+	{ 31, 211 },	/* 119 M */
+	{ 32, 199 },	/* 130.25 M */
+	{ 63, 307 },	/* 138.50 M */
+	{ 11, 60 },	/* 148.50 M */
+	{ 50, 263 },	/* 154 M */
+	{ 31, 120 },	/* 205.25 M */
+	{ 119, 359 },	/* 268.50 M */
+	{ },
+};
+
+static int clk_edp_pixel_set_rate(struct clk_hw *hw, unsigned long rate,
+			      unsigned long parent_rate)
+{
+	struct clk_rcg2 *rcg = to_clk_rcg2(hw);
+	struct freq_tbl f = *rcg->freq_tbl;
+	const struct frac_entry *frac;
+	int delta = 100000;
+	s64 src_rate = parent_rate;
+	s64 request;
+	u32 mask = BIT(rcg->hid_width) - 1;
+	u32 hid_div;
+
+	if (src_rate == 810000000)
+		frac = frac_table_810m;
+	else
+		frac = frac_table_675m;
+
+	for (; frac->num; frac++) {
+		request = rate;
+		request *= frac->den;
+		request = div_s64(request, frac->num);
+		if ((src_rate < (request - delta)) ||
+		    (src_rate > (request + delta)))
+			continue;
+
+		regmap_read(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG,
+				&hid_div);
+		f.pre_div = hid_div;
+		f.pre_div >>= CFG_SRC_DIV_SHIFT;
+		f.pre_div &= mask;
+		f.m = frac->num;
+		f.n = frac->den;
+
+		return clk_rcg2_configure(rcg, &f);
+	}
+
+	return -EINVAL;
+}
+
+static int clk_edp_pixel_set_rate_and_parent(struct clk_hw *hw,
+		unsigned long rate, unsigned long parent_rate, u8 index)
+{
+	/* Parent index is set statically in frequency table */
+	return clk_edp_pixel_set_rate(hw, rate, parent_rate);
+}
+
+static long clk_edp_pixel_determine_rate(struct clk_hw *hw, unsigned long rate,
+				 unsigned long *p_rate, struct clk **p)
+{
+	struct clk_rcg2 *rcg = to_clk_rcg2(hw);
+	const struct freq_tbl *f = rcg->freq_tbl;
+	const struct frac_entry *frac;
+	int delta = 100000;
+	s64 src_rate = *p_rate;
+	s64 request;
+	u32 mask = BIT(rcg->hid_width) - 1;
+	u32 hid_div;
+
+	/* Force the correct parent */
+	*p = clk_get_parent_by_index(hw->clk, f->src);
+
+	if (src_rate == 810000000)
+		frac = frac_table_810m;
+	else
+		frac = frac_table_675m;
+
+	for (; frac->num; frac++) {
+		request = rate;
+		request *= frac->den;
+		request = div_s64(request, frac->num);
+		if ((src_rate < (request - delta)) ||
+		    (src_rate > (request + delta)))
+			continue;
+
+		regmap_read(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG,
+				&hid_div);
+		hid_div >>= CFG_SRC_DIV_SHIFT;
+		hid_div &= mask;
+
+		return calc_rate(src_rate, frac->num, frac->den, !!frac->den,
+				 hid_div);
+	}
+
+	return -EINVAL;
+}
+
+const struct clk_ops clk_edp_pixel_ops = {
+	.is_enabled = clk_rcg2_is_enabled,
+	.get_parent = clk_rcg2_get_parent,
+	.set_parent = clk_rcg2_set_parent,
+	.recalc_rate = clk_rcg2_recalc_rate,
+	.set_rate = clk_edp_pixel_set_rate,
+	.set_rate_and_parent = clk_edp_pixel_set_rate_and_parent,
+	.determine_rate = clk_edp_pixel_determine_rate,
+};
+EXPORT_SYMBOL_GPL(clk_edp_pixel_ops);
+
+static long clk_byte_determine_rate(struct clk_hw *hw, unsigned long rate,
+			 unsigned long *p_rate, struct clk **p)
+{
+	struct clk_rcg2 *rcg = to_clk_rcg2(hw);
+	const struct freq_tbl *f = rcg->freq_tbl;
+	unsigned long parent_rate, div;
+	u32 mask = BIT(rcg->hid_width) - 1;
+
+	if (rate == 0)
+		return -EINVAL;
+
+	*p = clk_get_parent_by_index(hw->clk, f->src);
+	*p_rate = parent_rate = __clk_round_rate(*p, rate);
+
+	div = DIV_ROUND_UP((2 * parent_rate), rate) - 1;
+	div = min_t(u32, div, mask);
+
+	return calc_rate(parent_rate, 0, 0, 0, div);
+}
+
+static int clk_byte_set_rate(struct clk_hw *hw, unsigned long rate,
+			 unsigned long parent_rate)
+{
+	struct clk_rcg2 *rcg = to_clk_rcg2(hw);
+	struct freq_tbl f = *rcg->freq_tbl;
+	unsigned long div;
+	u32 mask = BIT(rcg->hid_width) - 1;
+
+	div = DIV_ROUND_UP((2 * parent_rate), rate) - 1;
+	div = min_t(u32, div, mask);
+
+	f.pre_div = div;
+
+	return clk_rcg2_configure(rcg, &f);
+}
+
+static int clk_byte_set_rate_and_parent(struct clk_hw *hw,
+		unsigned long rate, unsigned long parent_rate, u8 index)
+{
+	/* Parent index is set statically in frequency table */
+	return clk_byte_set_rate(hw, rate, parent_rate);
+}
+
+const struct clk_ops clk_byte_ops = {
+	.is_enabled = clk_rcg2_is_enabled,
+	.get_parent = clk_rcg2_get_parent,
+	.set_parent = clk_rcg2_set_parent,
+	.recalc_rate = clk_rcg2_recalc_rate,
+	.set_rate = clk_byte_set_rate,
+	.set_rate_and_parent = clk_byte_set_rate_and_parent,
+	.determine_rate = clk_byte_determine_rate,
+};
+EXPORT_SYMBOL_GPL(clk_byte_ops);
+
+static const struct frac_entry frac_table_pixel[] = {
+	{ 3, 8 },
+	{ 2, 9 },
+	{ 4, 9 },
+	{ 1, 1 },
+	{ }
+};
+
+static long clk_pixel_determine_rate(struct clk_hw *hw, unsigned long rate,
+				 unsigned long *p_rate, struct clk **p)
+{
+	struct clk_rcg2 *rcg = to_clk_rcg2(hw);
+	unsigned long request, src_rate;
+	int delta = 100000;
+	const struct freq_tbl *f = rcg->freq_tbl;
+	const struct frac_entry *frac = frac_table_pixel;
+	struct clk *parent = *p = clk_get_parent_by_index(hw->clk, f->src);
+
+	for (; frac->num; frac++) {
+		request = (rate * frac->den) / frac->num;
+
+		src_rate = __clk_round_rate(parent, request);
+		if ((src_rate < (request - delta)) ||
+			(src_rate > (request + delta)))
+			continue;
+
+		*p_rate = src_rate;
+		return (src_rate * frac->num) / frac->den;
+	}
+
+	return -EINVAL;
+}
+
+static int clk_pixel_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
+{
+	struct clk_rcg2 *rcg = to_clk_rcg2(hw);
+	struct freq_tbl f = *rcg->freq_tbl;
+	const struct frac_entry *frac = frac_table_pixel;
+	unsigned long request, src_rate;
+	int delta = 100000;
+	u32 mask = BIT(rcg->hid_width) - 1;
+	u32 hid_div;
+	struct clk *parent = clk_get_parent_by_index(hw->clk, f.src);
+
+	for (; frac->num; frac++) {
+		request = (rate * frac->den) / frac->num;
+
+		src_rate = __clk_round_rate(parent, request);
+		if ((src_rate < (request - delta)) ||
+			(src_rate > (request + delta)))
+			continue;
+
+		regmap_read(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG,
+				&hid_div);
+		f.pre_div = hid_div;
+		f.pre_div >>= CFG_SRC_DIV_SHIFT;
+		f.pre_div &= mask;
+		f.m = frac->num;
+		f.n = frac->den;
+
+		return clk_rcg2_configure(rcg, &f);
+	}
+	return -EINVAL;
+}
+
+static int clk_pixel_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate, u8 index)
+{
+	/* Parent index is set statically in frequency table */
+	return clk_pixel_set_rate(hw, rate, parent_rate);
+}
+
+const struct clk_ops clk_pixel_ops = {
+	.is_enabled = clk_rcg2_is_enabled,
+	.get_parent = clk_rcg2_get_parent,
+	.set_parent = clk_rcg2_set_parent,
+	.recalc_rate = clk_rcg2_recalc_rate,
+	.set_rate = clk_pixel_set_rate,
+	.set_rate_and_parent = clk_pixel_set_rate_and_parent,
+	.determine_rate = clk_pixel_determine_rate,
+};
+EXPORT_SYMBOL_GPL(clk_pixel_ops);
-- 
cgit v1.2.3


From b7b7cc7034d3bae236fdca31ed4b81fb7a75cd12 Mon Sep 17 00:00:00 2001
From: Stephen Boyd <sboyd@codeaurora.org>
Date: Fri, 16 May 2014 16:07:12 -0700
Subject: clk: qcom: Properly support display clocks on msm8974

The display clocks all source from dedicated phy PLLs within their
respective multimedia hardware block. Hook up these PLLs to the
display clocks with the appropriate parent mappings, clock flags,
and the appropriate clock ops. This should allow the display
clocks to work once the appropriate phy PLL driver registers their
PLL clocks.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/qcom/mmcc-msm8974.c | 105 +++++++++++++++++++++-------------------
 1 file changed, 54 insertions(+), 51 deletions(-)

(limited to 'drivers')

diff --git a/drivers/clk/qcom/mmcc-msm8974.c b/drivers/clk/qcom/mmcc-msm8974.c
index 62200bbc759e..c65b90515872 100644
--- a/drivers/clk/qcom/mmcc-msm8974.c
+++ b/drivers/clk/qcom/mmcc-msm8974.c
@@ -41,9 +41,11 @@
 #define P_EDPVCO	3
 #define P_GPLL1		4
 #define P_DSI0PLL	4
+#define P_DSI0PLL_BYTE	4
 #define P_MMPLL2	4
 #define P_MMPLL3	4
 #define P_DSI1PLL	5
+#define P_DSI1PLL_BYTE	5
 
 static const u8 mmcc_xo_mmpll0_mmpll1_gpll0_map[] = {
 	[P_XO]		= 0,
@@ -161,6 +163,24 @@ static const char *mmcc_xo_dsi_hdmi_edp_gpll0[] = {
 	"dsi1pll",
 };
 
+static const u8 mmcc_xo_dsibyte_hdmi_edp_gpll0_map[] = {
+	[P_XO]			= 0,
+	[P_EDPLINK]		= 4,
+	[P_HDMIPLL]		= 3,
+	[P_GPLL0]		= 5,
+	[P_DSI0PLL_BYTE]	= 1,
+	[P_DSI1PLL_BYTE]	= 2,
+};
+
+static const char *mmcc_xo_dsibyte_hdmi_edp_gpll0[] = {
+	"xo",
+	"edp_link_clk",
+	"hdmipll",
+	"gpll0_vote",
+	"dsi0pllbyte",
+	"dsi1pllbyte",
+};
+
 #define F(f, s, h, m, n) { (f), (s), (2 * (h) - 1), (m), (n) }
 
 static struct clk_pll mmpll0 = {
@@ -500,15 +520,8 @@ static struct clk_rcg2 jpeg2_clk_src = {
 	},
 };
 
-static struct freq_tbl ftbl_mdss_pclk0_clk[] = {
-	F(125000000, P_DSI0PLL, 2, 0, 0),
-	F(250000000, P_DSI0PLL, 1, 0, 0),
-	{ }
-};
-
-static struct freq_tbl ftbl_mdss_pclk1_clk[] = {
-	F(125000000, P_DSI1PLL, 2, 0, 0),
-	F(250000000, P_DSI1PLL, 1, 0, 0),
+static struct freq_tbl pixel_freq_tbl[] = {
+	{ .src = P_DSI0PLL },
 	{ }
 };
 
@@ -517,12 +530,13 @@ static struct clk_rcg2 pclk0_clk_src = {
 	.mnd_width = 8,
 	.hid_width = 5,
 	.parent_map = mmcc_xo_dsi_hdmi_edp_gpll0_map,
-	.freq_tbl = ftbl_mdss_pclk0_clk,
+	.freq_tbl = pixel_freq_tbl,
 	.clkr.hw.init = &(struct clk_init_data){
 		.name = "pclk0_clk_src",
 		.parent_names = mmcc_xo_dsi_hdmi_edp_gpll0,
 		.num_parents = 6,
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_pixel_ops,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -531,12 +545,13 @@ static struct clk_rcg2 pclk1_clk_src = {
 	.mnd_width = 8,
 	.hid_width = 5,
 	.parent_map = mmcc_xo_dsi_hdmi_edp_gpll0_map,
-	.freq_tbl = ftbl_mdss_pclk1_clk,
+	.freq_tbl = pixel_freq_tbl,
 	.clkr.hw.init = &(struct clk_init_data){
 		.name = "pclk1_clk_src",
 		.parent_names = mmcc_xo_dsi_hdmi_edp_gpll0,
 		.num_parents = 6,
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_pixel_ops,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -754,41 +769,36 @@ static struct clk_rcg2 cpp_clk_src = {
 	},
 };
 
-static struct freq_tbl ftbl_mdss_byte0_clk[] = {
-	F(93750000, P_DSI0PLL, 8, 0, 0),
-	F(187500000, P_DSI0PLL, 4, 0, 0),
-	{ }
-};
-
-static struct freq_tbl ftbl_mdss_byte1_clk[] = {
-	F(93750000, P_DSI1PLL, 8, 0, 0),
-	F(187500000, P_DSI1PLL, 4, 0, 0),
+static struct freq_tbl byte_freq_tbl[] = {
+	{ .src = P_DSI0PLL_BYTE },
 	{ }
 };
 
 static struct clk_rcg2 byte0_clk_src = {
 	.cmd_rcgr = 0x2120,
 	.hid_width = 5,
-	.parent_map = mmcc_xo_dsi_hdmi_edp_gpll0_map,
-	.freq_tbl = ftbl_mdss_byte0_clk,
+	.parent_map = mmcc_xo_dsibyte_hdmi_edp_gpll0_map,
+	.freq_tbl = byte_freq_tbl,
 	.clkr.hw.init = &(struct clk_init_data){
 		.name = "byte0_clk_src",
-		.parent_names = mmcc_xo_dsi_hdmi_edp_gpll0,
+		.parent_names = mmcc_xo_dsibyte_hdmi_edp_gpll0,
 		.num_parents = 6,
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_byte_ops,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
 static struct clk_rcg2 byte1_clk_src = {
 	.cmd_rcgr = 0x2140,
 	.hid_width = 5,
-	.parent_map = mmcc_xo_dsi_hdmi_edp_gpll0_map,
-	.freq_tbl = ftbl_mdss_byte1_clk,
+	.parent_map = mmcc_xo_dsibyte_hdmi_edp_gpll0_map,
+	.freq_tbl = byte_freq_tbl,
 	.clkr.hw.init = &(struct clk_init_data){
 		.name = "byte1_clk_src",
-		.parent_names = mmcc_xo_dsi_hdmi_edp_gpll0,
+		.parent_names = mmcc_xo_dsibyte_hdmi_edp_gpll0,
 		.num_parents = 6,
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_byte_ops,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
@@ -826,12 +836,12 @@ static struct clk_rcg2 edplink_clk_src = {
 		.parent_names = mmcc_xo_dsi_hdmi_edp_gpll0,
 		.num_parents = 6,
 		.ops = &clk_rcg2_ops,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
-static struct freq_tbl ftbl_mdss_edppixel_clk[] = {
-	F(175000000, P_EDPVCO, 2, 0, 0),
-	F(350000000, P_EDPVCO, 11, 0, 0),
+static struct freq_tbl edp_pixel_freq_tbl[] = {
+	{ .src = P_EDPVCO },
 	{ }
 };
 
@@ -840,12 +850,12 @@ static struct clk_rcg2 edppixel_clk_src = {
 	.mnd_width = 8,
 	.hid_width = 5,
 	.parent_map = mmcc_xo_dsi_hdmi_edp_map,
-	.freq_tbl = ftbl_mdss_edppixel_clk,
+	.freq_tbl = edp_pixel_freq_tbl,
 	.clkr.hw.init = &(struct clk_init_data){
 		.name = "edppixel_clk_src",
 		.parent_names = mmcc_xo_dsi_hdmi_edp,
 		.num_parents = 6,
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_edp_pixel_ops,
 	},
 };
 
@@ -857,11 +867,11 @@ static struct freq_tbl ftbl_mdss_esc0_1_clk[] = {
 static struct clk_rcg2 esc0_clk_src = {
 	.cmd_rcgr = 0x2160,
 	.hid_width = 5,
-	.parent_map = mmcc_xo_dsi_hdmi_edp_gpll0_map,
+	.parent_map = mmcc_xo_dsibyte_hdmi_edp_gpll0_map,
 	.freq_tbl = ftbl_mdss_esc0_1_clk,
 	.clkr.hw.init = &(struct clk_init_data){
 		.name = "esc0_clk_src",
-		.parent_names = mmcc_xo_dsi_hdmi_edp_gpll0,
+		.parent_names = mmcc_xo_dsibyte_hdmi_edp_gpll0,
 		.num_parents = 6,
 		.ops = &clk_rcg2_ops,
 	},
@@ -870,26 +880,18 @@ static struct clk_rcg2 esc0_clk_src = {
 static struct clk_rcg2 esc1_clk_src = {
 	.cmd_rcgr = 0x2180,
 	.hid_width = 5,
-	.parent_map = mmcc_xo_dsi_hdmi_edp_gpll0_map,
+	.parent_map = mmcc_xo_dsibyte_hdmi_edp_gpll0_map,
 	.freq_tbl = ftbl_mdss_esc0_1_clk,
 	.clkr.hw.init = &(struct clk_init_data){
 		.name = "esc1_clk_src",
-		.parent_names = mmcc_xo_dsi_hdmi_edp_gpll0,
+		.parent_names = mmcc_xo_dsibyte_hdmi_edp_gpll0,
 		.num_parents = 6,
 		.ops = &clk_rcg2_ops,
 	},
 };
 
-static struct freq_tbl ftbl_mdss_extpclk_clk[] = {
-	F(25200000, P_HDMIPLL, 1, 0, 0),
-	F(27000000, P_HDMIPLL, 1, 0, 0),
-	F(27030000, P_HDMIPLL, 1, 0, 0),
-	F(65000000, P_HDMIPLL, 1, 0, 0),
-	F(74250000, P_HDMIPLL, 1, 0, 0),
-	F(108000000, P_HDMIPLL, 1, 0, 0),
-	F(148500000, P_HDMIPLL, 1, 0, 0),
-	F(268500000, P_HDMIPLL, 1, 0, 0),
-	F(297000000, P_HDMIPLL, 1, 0, 0),
+static struct freq_tbl extpclk_freq_tbl[] = {
+	{ .src = P_HDMIPLL },
 	{ }
 };
 
@@ -897,12 +899,13 @@ static struct clk_rcg2 extpclk_clk_src = {
 	.cmd_rcgr = 0x2060,
 	.hid_width = 5,
 	.parent_map = mmcc_xo_dsi_hdmi_edp_gpll0_map,
-	.freq_tbl = ftbl_mdss_extpclk_clk,
+	.freq_tbl = extpclk_freq_tbl,
 	.clkr.hw.init = &(struct clk_init_data){
 		.name = "extpclk_clk_src",
 		.parent_names = mmcc_xo_dsi_hdmi_edp_gpll0,
 		.num_parents = 6,
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_byte_ops,
+		.flags = CLK_SET_RATE_PARENT,
 	},
 };
 
-- 
cgit v1.2.3


From c685841ee127e8023a33be68fd8af6fe192a3665 Mon Sep 17 00:00:00 2001
From: Stephen Boyd <sboyd@codeaurora.org>
Date: Fri, 16 May 2014 16:07:13 -0700
Subject: clk: qcom: Support msm8974pro global clock control hardware

A new PLL (gpll4) is added on msm8974 PRO devices to support a
faster sdc1 clock rate. Add support for this and the two new sdcc
cal clocks.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 .../devicetree/bindings/clock/qcom,gcc.txt         |   2 +
 drivers/clk/qcom/gcc-msm8974.c                     | 130 ++++++++++++++++++++-
 include/dt-bindings/clock/qcom,gcc-msm8974.h       |   4 +
 3 files changed, 130 insertions(+), 6 deletions(-)

(limited to 'drivers')

diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.txt b/Documentation/devicetree/bindings/clock/qcom,gcc.txt
index 7b7104e8cb1e..9cfcb4f2bc97 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc.txt
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc.txt
@@ -8,6 +8,8 @@ Required properties :
 			"qcom,gcc-msm8660"
 			"qcom,gcc-msm8960"
 			"qcom,gcc-msm8974"
+			"qcom,gcc-msm8974pro"
+			"qcom,gcc-msm8974pro-ac"
 
 - reg : shall contain base register location and length
 - #clock-cells : shall contain 1
diff --git a/drivers/clk/qcom/gcc-msm8974.c b/drivers/clk/qcom/gcc-msm8974.c
index 7a420fcdb89e..7af7c18d2144 100644
--- a/drivers/clk/qcom/gcc-msm8974.c
+++ b/drivers/clk/qcom/gcc-msm8974.c
@@ -35,6 +35,7 @@
 #define P_XO	0
 #define P_GPLL0	1
 #define P_GPLL1	1
+#define P_GPLL4	2
 
 static const u8 gcc_xo_gpll0_map[] = {
 	[P_XO]		= 0,
@@ -46,6 +47,18 @@ static const char *gcc_xo_gpll0[] = {
 	"gpll0_vote",
 };
 
+static const u8 gcc_xo_gpll0_gpll4_map[] = {
+	[P_XO]		= 0,
+	[P_GPLL0]	= 1,
+	[P_GPLL4]	= 5,
+};
+
+static const char *gcc_xo_gpll0_gpll4[] = {
+	"xo",
+	"gpll0_vote",
+	"gpll4_vote",
+};
+
 #define F(f, s, h, m, n) { (f), (s), (2 * (h) - 1), (m), (n) }
 
 static struct clk_pll gpll0 = {
@@ -138,6 +151,33 @@ static struct clk_regmap gpll1_vote = {
 	},
 };
 
+static struct clk_pll gpll4 = {
+	.l_reg = 0x1dc4,
+	.m_reg = 0x1dc8,
+	.n_reg = 0x1dcc,
+	.config_reg = 0x1dd4,
+	.mode_reg = 0x1dc0,
+	.status_reg = 0x1ddc,
+	.status_bit = 17,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gpll4",
+		.parent_names = (const char *[]){ "xo" },
+		.num_parents = 1,
+		.ops = &clk_pll_ops,
+	},
+};
+
+static struct clk_regmap gpll4_vote = {
+	.enable_reg = 0x1480,
+	.enable_mask = BIT(4),
+	.hw.init = &(struct clk_init_data){
+		.name = "gpll4_vote",
+		.parent_names = (const char *[]){ "gpll4" },
+		.num_parents = 1,
+		.ops = &clk_pll_vote_ops,
+	},
+};
+
 static const struct freq_tbl ftbl_gcc_usb30_master_clk[] = {
 	F(125000000, P_GPLL0, 1, 5, 24),
 	{ }
@@ -812,18 +852,33 @@ static const struct freq_tbl ftbl_gcc_sdcc1_4_apps_clk[] = {
 	{ }
 };
 
+static const struct freq_tbl ftbl_gcc_sdcc1_apps_clk_pro[] = {
+	F(144000, P_XO, 16, 3, 25),
+	F(400000, P_XO, 12, 1, 4),
+	F(20000000, P_GPLL0, 15, 1, 2),
+	F(25000000, P_GPLL0, 12, 1, 2),
+	F(50000000, P_GPLL0, 12, 0, 0),
+	F(100000000, P_GPLL0, 6, 0, 0),
+	F(192000000, P_GPLL4, 4, 0, 0),
+	F(200000000, P_GPLL0, 3, 0, 0),
+	F(384000000, P_GPLL4, 2, 0, 0),
+	{ }
+};
+
+static struct clk_init_data sdcc1_apps_clk_src_init = {
+	.name = "sdcc1_apps_clk_src",
+	.parent_names = gcc_xo_gpll0,
+	.num_parents = 2,
+	.ops = &clk_rcg2_ops,
+};
+
 static struct clk_rcg2 sdcc1_apps_clk_src = {
 	.cmd_rcgr = 0x04d0,
 	.mnd_width = 8,
 	.hid_width = 5,
 	.parent_map = gcc_xo_gpll0_map,
 	.freq_tbl = ftbl_gcc_sdcc1_4_apps_clk,
-	.clkr.hw.init = &(struct clk_init_data){
-		.name = "sdcc1_apps_clk_src",
-		.parent_names = gcc_xo_gpll0,
-		.num_parents = 2,
-		.ops = &clk_rcg2_ops,
-	},
+	.clkr.hw.init = &sdcc1_apps_clk_src_init,
 };
 
 static struct clk_rcg2 sdcc2_apps_clk_src = {
@@ -1995,6 +2050,38 @@ static struct clk_branch gcc_sdcc1_apps_clk = {
 	},
 };
 
+static struct clk_branch gcc_sdcc1_cdccal_ff_clk = {
+	.halt_reg = 0x04e8,
+	.clkr = {
+		.enable_reg = 0x04e8,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_sdcc1_cdccal_ff_clk",
+			.parent_names = (const char *[]){
+				"xo"
+			},
+			.num_parents = 1,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_sdcc1_cdccal_sleep_clk = {
+	.halt_reg = 0x04e4,
+	.clkr = {
+		.enable_reg = 0x04e4,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_sdcc1_cdccal_sleep_clk",
+			.parent_names = (const char *[]){
+				"sleep_clk_src"
+			},
+			.num_parents = 1,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
 static struct clk_branch gcc_sdcc2_ahb_clk = {
 	.halt_reg = 0x0508,
 	.clkr = {
@@ -2484,6 +2571,10 @@ static struct clk_regmap *gcc_msm8974_clocks[] = {
 	[GCC_USB_HSIC_IO_CAL_SLEEP_CLK] = &gcc_usb_hsic_io_cal_sleep_clk.clkr,
 	[GCC_USB_HSIC_SYSTEM_CLK] = &gcc_usb_hsic_system_clk.clkr,
 	[GCC_MMSS_GPLL0_CLK_SRC] = &gcc_mmss_gpll0_clk_src,
+	[GPLL4] = NULL,
+	[GPLL4_VOTE] = NULL,
+	[GCC_SDCC1_CDCCAL_SLEEP_CLK] = NULL,
+	[GCC_SDCC1_CDCCAL_FF_CLK] = NULL,
 };
 
 static const struct qcom_reset_map gcc_msm8974_resets[] = {
@@ -2585,14 +2676,41 @@ static const struct qcom_cc_desc gcc_msm8974_desc = {
 
 static const struct of_device_id gcc_msm8974_match_table[] = {
 	{ .compatible = "qcom,gcc-msm8974" },
+	{ .compatible = "qcom,gcc-msm8974pro" , .data = (void *)1UL },
+	{ .compatible = "qcom,gcc-msm8974pro-ac", .data = (void *)1UL },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, gcc_msm8974_match_table);
 
+static void msm8974_pro_clock_override(void)
+{
+	sdcc1_apps_clk_src_init.parent_names = gcc_xo_gpll0_gpll4;
+	sdcc1_apps_clk_src_init.num_parents = 3;
+	sdcc1_apps_clk_src.freq_tbl = ftbl_gcc_sdcc1_apps_clk_pro;
+	sdcc1_apps_clk_src.parent_map = gcc_xo_gpll0_gpll4_map;
+
+	gcc_msm8974_clocks[GPLL4] = &gpll4.clkr;
+	gcc_msm8974_clocks[GPLL4_VOTE] = &gpll4_vote;
+	gcc_msm8974_clocks[GCC_SDCC1_CDCCAL_SLEEP_CLK] =
+		&gcc_sdcc1_cdccal_sleep_clk.clkr;
+	gcc_msm8974_clocks[GCC_SDCC1_CDCCAL_FF_CLK] =
+		&gcc_sdcc1_cdccal_ff_clk.clkr;
+}
+
 static int gcc_msm8974_probe(struct platform_device *pdev)
 {
 	struct clk *clk;
 	struct device *dev = &pdev->dev;
+	bool pro;
+	const struct of_device_id *id;
+
+	id = of_match_device(gcc_msm8974_match_table, dev);
+	if (!id)
+		return -ENODEV;
+	pro = !!(id->data);
+
+	if (pro)
+		msm8974_pro_clock_override();
 
 	/* Temporary until RPM clocks supported */
 	clk = clk_register_fixed_rate(dev, "xo", NULL, CLK_IS_ROOT, 19200000);
diff --git a/include/dt-bindings/clock/qcom,gcc-msm8974.h b/include/dt-bindings/clock/qcom,gcc-msm8974.h
index 223ca174d9d3..51e51c860fe6 100644
--- a/include/dt-bindings/clock/qcom,gcc-msm8974.h
+++ b/include/dt-bindings/clock/qcom,gcc-msm8974.h
@@ -316,5 +316,9 @@
 #define GCC_CE2_CLK_SLEEP_ENA					299
 #define GCC_CE2_AXI_CLK_SLEEP_ENA				300
 #define GCC_CE2_AHB_CLK_SLEEP_ENA				301
+#define GPLL4							302
+#define GPLL4_VOTE						303
+#define GCC_SDCC1_CDCCAL_SLEEP_CLK				304
+#define GCC_SDCC1_CDCCAL_FF_CLK					305
 
 #endif
-- 
cgit v1.2.3


From 9ec2749bde1a5827beef5be64bfd5f24992f4ef3 Mon Sep 17 00:00:00 2001
From: Stephen Boyd <sboyd@codeaurora.org>
Date: Fri, 16 May 2014 16:07:14 -0700
Subject: clk: qcom: Return error pointers for unimplemented clocks

Not all clocks are implemented but client drivers can still
request them. Currently we will return a NULL pointer to them if
the clock isn't implemented in software but NULL pointers are
valid clock pointers. Return an error pointer so that driver's
don't proceed without a clock they may actually need.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/qcom/common.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'drivers')

diff --git a/drivers/clk/qcom/common.c b/drivers/clk/qcom/common.c
index 86b45fba5f90..9b5a1cfc6b91 100644
--- a/drivers/clk/qcom/common.c
+++ b/drivers/clk/qcom/common.c
@@ -62,8 +62,10 @@ int qcom_cc_probe(struct platform_device *pdev, const struct qcom_cc_desc *desc)
 	data->clk_num = num_clks;
 
 	for (i = 0; i < num_clks; i++) {
-		if (!rclks[i])
+		if (!rclks[i]) {
+			clks[i] = ERR_PTR(-ENOENT);
 			continue;
+		}
 		clk = devm_clk_register_regmap(dev, rclks[i]);
 		if (IS_ERR(clk))
 			return PTR_ERR(clk);
-- 
cgit v1.2.3


From ab7ad35300f3810bca13993d1a6e100505c4af5b Mon Sep 17 00:00:00 2001
From: Colin Ian King <colin.king@canonical.com>
Date: Sat, 12 Apr 2014 18:59:14 +0100
Subject: clk: versatile: free icst on error return

commit a183da63 introduced a new error return path that does
not kfree icst if the kmemdup of desc->params fails.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/versatile/clk-icst.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers')

diff --git a/drivers/clk/versatile/clk-icst.c b/drivers/clk/versatile/clk-icst.c
index 7f3868a227c8..bc96f103bd7c 100644
--- a/drivers/clk/versatile/clk-icst.c
+++ b/drivers/clk/versatile/clk-icst.c
@@ -140,6 +140,7 @@ struct clk *icst_clk_register(struct device *dev,
 
 	pclone = kmemdup(desc->params, sizeof(*pclone), GFP_KERNEL);
 	if (!pclone) {
+		kfree(icst);
 		pr_err("could not clone ICST params\n");
 		return ERR_PTR(-ENOMEM);
 	}
-- 
cgit v1.2.3


From 1cdf8ee2f88bbc14c697a0b8a2f25f58ed57d591 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Tue, 3 Jun 2014 11:40:14 +0200
Subject: clk: export __clk_round_rate for providers

Commit 99cbd064b0 ("clk: qcom: Support display RCG clocks") adds
a use of the __clk_round_rate in a clock provided that can be built
as a loadable module.

This exports the symbol to avoid the build error from compiling
the qcom clock as a module.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 drivers/clk/clk.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers')

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 2df2b26297ce..8b73edef151d 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -1006,6 +1006,7 @@ unsigned long __clk_round_rate(struct clk *clk, unsigned long rate)
 	else
 		return clk->rate;
 }
+EXPORT_SYMBOL_GPL(__clk_round_rate);
 
 /**
  * clk_round_rate - round the given rate for a clk
-- 
cgit v1.2.3


From 3cbcb16095f916f50a5a55066fcc4be06946ce1e Mon Sep 17 00:00:00 2001
From: David Lanzendörfer <david.lanzendoerfer@o2s.ch>
Date: Mon, 12 May 2014 14:04:48 +0200
Subject: mmc: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The Allwinner sunxi mmc host uses dma in bus-master mode using a built-in
designware idmac controller, which is identical to the one found in the mmc-dw
hosts. However the rest of the host is not identical to mmc-dw, it deals with
sending stop commands in hardware which makes it significantly different
from the mmc-dw devices.

Signed-off-by: David Lanzendörfer <david.lanzendoerfer@o2s.ch>
[hdegoede@redhat.com: various cleanups and fixes]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Chris Ball <chris@printf.net>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
---
 .../devicetree/bindings/mmc/sunxi-mmc.txt          |   43 +
 drivers/mmc/host/Kconfig                           |    7 +
 drivers/mmc/host/Makefile                          |    1 +
 drivers/mmc/host/sunxi-mmc.c                       | 1049 ++++++++++++++++++++
 4 files changed, 1100 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mmc/sunxi-mmc.txt
 create mode 100644 drivers/mmc/host/sunxi-mmc.c

(limited to 'drivers')

diff --git a/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt b/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt
new file mode 100644
index 000000000000..91b3a3467150
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt
@@ -0,0 +1,43 @@
+* Allwinner sunxi MMC controller
+
+The highspeed MMC host controller on Allwinner SoCs provides an interface
+for MMC, SD and SDIO types of memory cards.
+
+Supported maximum speeds are the ones of the eMMC standard 4.5 as well
+as the speed of SD standard 3.0.
+Absolute maximum transfer rate is 200MB/s
+
+Required properties:
+ - compatible : "allwinner,sun4i-a10-mmc" or "allwinner,sun5i-a13-mmc"
+ - reg : mmc controller base registers
+ - clocks : a list with 2 phandle + clock specifier pairs
+ - clock-names : must contain "ahb" and "mmc"
+ - interrupts : mmc controller interrupt
+
+Optional properties:
+ - resets : phandle + reset specifier pair
+ - reset-names : must contain "ahb"
+ - for cd, bus-width and additional generic mmc parameters
+   please refer to mmc.txt within this directory
+
+Examples:
+	- Within .dtsi:
+	mmc0: mmc@01c0f000 {
+		compatible = "allwinner,sun5i-a13-mmc";
+		reg = <0x01c0f000 0x1000>;
+		clocks = <&ahb_gates 8>, <&mmc0_clk>;
+		clock-names = "ahb", "mod";
+		interrupts = <0 32 4>;
+		status = "disabled";
+	};
+
+	- Within dts:
+	mmc0: mmc@01c0f000 {
+		pinctrl-names = "default", "default";
+		pinctrl-0 = <&mmc0_pins_a>;
+		pinctrl-1 = <&mmc0_cd_pin_reference_design>;
+		bus-width = <4>;
+		cd-gpios = <&pio 7 1 0>; /* PH1 */
+		cd-inverted;
+		status = "okay";
+	};
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 8aaf8c1f3f63..d50ac1ca11ea 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -694,3 +694,10 @@ config MMC_REALTEK_PCI
 	help
 	  Say Y here to include driver code to support SD/MMC card interface
 	  of Realtek PCI-E card reader
+
+config MMC_SUNXI
+	tristate "Allwinner sunxi SD/MMC Host Controller support"
+	depends on ARCH_SUNXI
+	help
+	  This selects support for the SD/MMC Host Controller on
+	  Allwinner sunxi SoCs.
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 0c8aa5e1e304..3072bfb6d26a 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -50,6 +50,7 @@ obj-$(CONFIG_MMC_JZ4740)	+= jz4740_mmc.o
 obj-$(CONFIG_MMC_VUB300)	+= vub300.o
 obj-$(CONFIG_MMC_USHC)		+= ushc.o
 obj-$(CONFIG_MMC_WMT)		+= wmt-sdmmc.o
+obj-$(CONFIG_MMC_SUNXI)		+= sunxi-mmc.o
 
 obj-$(CONFIG_MMC_REALTEK_PCI)	+= rtsx_pci_sdmmc.o
 
diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c
new file mode 100644
index 000000000000..024f67c98cdc
--- /dev/null
+++ b/drivers/mmc/host/sunxi-mmc.c
@@ -0,0 +1,1049 @@
+/*
+ * Driver for sunxi SD/MMC host controllers
+ * (C) Copyright 2007-2011 Reuuimlla Technology Co., Ltd.
+ * (C) Copyright 2007-2011 Aaron Maoye <leafy.myeh@reuuimllatech.com>
+ * (C) Copyright 2013-2014 O2S GmbH <www.o2s.ch>
+ * (C) Copyright 2013-2014 David Lanzend�rfer <david.lanzendoerfer@o2s.ch>
+ * (C) Copyright 2013-2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+
+#include <linux/clk.h>
+#include <linux/clk-private.h>
+#include <linux/clk/sunxi.h>
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/scatterlist.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+#include <linux/reset.h>
+
+#include <linux/of_address.h>
+#include <linux/of_gpio.h>
+#include <linux/of_platform.h>
+
+#include <linux/mmc/host.h>
+#include <linux/mmc/sd.h>
+#include <linux/mmc/sdio.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/core.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/slot-gpio.h>
+
+/* register offset definitions */
+#define SDXC_REG_GCTRL	(0x00) /* SMC Global Control Register */
+#define SDXC_REG_CLKCR	(0x04) /* SMC Clock Control Register */
+#define SDXC_REG_TMOUT	(0x08) /* SMC Time Out Register */
+#define SDXC_REG_WIDTH	(0x0C) /* SMC Bus Width Register */
+#define SDXC_REG_BLKSZ	(0x10) /* SMC Block Size Register */
+#define SDXC_REG_BCNTR	(0x14) /* SMC Byte Count Register */
+#define SDXC_REG_CMDR	(0x18) /* SMC Command Register */
+#define SDXC_REG_CARG	(0x1C) /* SMC Argument Register */
+#define SDXC_REG_RESP0	(0x20) /* SMC Response Register 0 */
+#define SDXC_REG_RESP1	(0x24) /* SMC Response Register 1 */
+#define SDXC_REG_RESP2	(0x28) /* SMC Response Register 2 */
+#define SDXC_REG_RESP3	(0x2C) /* SMC Response Register 3 */
+#define SDXC_REG_IMASK	(0x30) /* SMC Interrupt Mask Register */
+#define SDXC_REG_MISTA	(0x34) /* SMC Masked Interrupt Status Register */
+#define SDXC_REG_RINTR	(0x38) /* SMC Raw Interrupt Status Register */
+#define SDXC_REG_STAS	(0x3C) /* SMC Status Register */
+#define SDXC_REG_FTRGL	(0x40) /* SMC FIFO Threshold Watermark Registe */
+#define SDXC_REG_FUNS	(0x44) /* SMC Function Select Register */
+#define SDXC_REG_CBCR	(0x48) /* SMC CIU Byte Count Register */
+#define SDXC_REG_BBCR	(0x4C) /* SMC BIU Byte Count Register */
+#define SDXC_REG_DBGC	(0x50) /* SMC Debug Enable Register */
+#define SDXC_REG_HWRST	(0x78) /* SMC Card Hardware Reset for Register */
+#define SDXC_REG_DMAC	(0x80) /* SMC IDMAC Control Register */
+#define SDXC_REG_DLBA	(0x84) /* SMC IDMAC Descriptor List Base Addre */
+#define SDXC_REG_IDST	(0x88) /* SMC IDMAC Status Register */
+#define SDXC_REG_IDIE	(0x8C) /* SMC IDMAC Interrupt Enable Register */
+#define SDXC_REG_CHDA	(0x90)
+#define SDXC_REG_CBDA	(0x94)
+
+#define mmc_readl(host, reg) \
+	readl((host)->reg_base + SDXC_##reg)
+#define mmc_writel(host, reg, value) \
+	writel((value), (host)->reg_base + SDXC_##reg)
+
+/* global control register bits */
+#define SDXC_SOFT_RESET			BIT(0)
+#define SDXC_FIFO_RESET			BIT(1)
+#define SDXC_DMA_RESET			BIT(2)
+#define SDXC_INTERRUPT_ENABLE_BIT	BIT(4)
+#define SDXC_DMA_ENABLE_BIT		BIT(5)
+#define SDXC_DEBOUNCE_ENABLE_BIT	BIT(8)
+#define SDXC_POSEDGE_LATCH_DATA		BIT(9)
+#define SDXC_DDR_MODE			BIT(10)
+#define SDXC_MEMORY_ACCESS_DONE		BIT(29)
+#define SDXC_ACCESS_DONE_DIRECT		BIT(30)
+#define SDXC_ACCESS_BY_AHB		BIT(31)
+#define SDXC_ACCESS_BY_DMA		(0 << 31)
+#define SDXC_HARDWARE_RESET \
+	(SDXC_SOFT_RESET | SDXC_FIFO_RESET | SDXC_DMA_RESET)
+
+/* clock control bits */
+#define SDXC_CARD_CLOCK_ON		BIT(16)
+#define SDXC_LOW_POWER_ON		BIT(17)
+
+/* bus width */
+#define SDXC_WIDTH1			0
+#define SDXC_WIDTH4			1
+#define SDXC_WIDTH8			2
+
+/* smc command bits */
+#define SDXC_RESP_EXPIRE		BIT(6)
+#define SDXC_LONG_RESPONSE		BIT(7)
+#define SDXC_CHECK_RESPONSE_CRC		BIT(8)
+#define SDXC_DATA_EXPIRE		BIT(9)
+#define SDXC_WRITE			BIT(10)
+#define SDXC_SEQUENCE_MODE		BIT(11)
+#define SDXC_SEND_AUTO_STOP		BIT(12)
+#define SDXC_WAIT_PRE_OVER		BIT(13)
+#define SDXC_STOP_ABORT_CMD		BIT(14)
+#define SDXC_SEND_INIT_SEQUENCE		BIT(15)
+#define SDXC_UPCLK_ONLY			BIT(21)
+#define SDXC_READ_CEATA_DEV		BIT(22)
+#define SDXC_CCS_EXPIRE			BIT(23)
+#define SDXC_ENABLE_BIT_BOOT		BIT(24)
+#define SDXC_ALT_BOOT_OPTIONS		BIT(25)
+#define SDXC_BOOT_ACK_EXPIRE		BIT(26)
+#define SDXC_BOOT_ABORT			BIT(27)
+#define SDXC_VOLTAGE_SWITCH	        BIT(28)
+#define SDXC_USE_HOLD_REGISTER	        BIT(29)
+#define SDXC_START			BIT(31)
+
+/* interrupt bits */
+#define SDXC_RESP_ERROR			BIT(1)
+#define SDXC_COMMAND_DONE		BIT(2)
+#define SDXC_DATA_OVER			BIT(3)
+#define SDXC_TX_DATA_REQUEST		BIT(4)
+#define SDXC_RX_DATA_REQUEST		BIT(5)
+#define SDXC_RESP_CRC_ERROR		BIT(6)
+#define SDXC_DATA_CRC_ERROR		BIT(7)
+#define SDXC_RESP_TIMEOUT		BIT(8)
+#define SDXC_DATA_TIMEOUT		BIT(9)
+#define SDXC_VOLTAGE_CHANGE_DONE	BIT(10)
+#define SDXC_FIFO_RUN_ERROR		BIT(11)
+#define SDXC_HARD_WARE_LOCKED		BIT(12)
+#define SDXC_START_BIT_ERROR		BIT(13)
+#define SDXC_AUTO_COMMAND_DONE		BIT(14)
+#define SDXC_END_BIT_ERROR		BIT(15)
+#define SDXC_SDIO_INTERRUPT		BIT(16)
+#define SDXC_CARD_INSERT		BIT(30)
+#define SDXC_CARD_REMOVE		BIT(31)
+#define SDXC_INTERRUPT_ERROR_BIT \
+	(SDXC_RESP_ERROR | SDXC_RESP_CRC_ERROR | SDXC_DATA_CRC_ERROR | \
+	 SDXC_RESP_TIMEOUT | SDXC_DATA_TIMEOUT | SDXC_FIFO_RUN_ERROR | \
+	 SDXC_HARD_WARE_LOCKED | SDXC_START_BIT_ERROR | SDXC_END_BIT_ERROR)
+#define SDXC_INTERRUPT_DONE_BIT \
+	(SDXC_AUTO_COMMAND_DONE | SDXC_DATA_OVER | \
+	 SDXC_COMMAND_DONE | SDXC_VOLTAGE_CHANGE_DONE)
+
+/* status */
+#define SDXC_RXWL_FLAG			BIT(0)
+#define SDXC_TXWL_FLAG			BIT(1)
+#define SDXC_FIFO_EMPTY			BIT(2)
+#define SDXC_FIFO_FULL			BIT(3)
+#define SDXC_CARD_PRESENT		BIT(8)
+#define SDXC_CARD_DATA_BUSY		BIT(9)
+#define SDXC_DATA_FSM_BUSY		BIT(10)
+#define SDXC_DMA_REQUEST		BIT(31)
+#define SDXC_FIFO_SIZE			16
+
+/* Function select */
+#define SDXC_CEATA_ON			(0xceaa << 16)
+#define SDXC_SEND_IRQ_RESPONSE		BIT(0)
+#define SDXC_SDIO_READ_WAIT		BIT(1)
+#define SDXC_ABORT_READ_DATA		BIT(2)
+#define SDXC_SEND_CCSD			BIT(8)
+#define SDXC_SEND_AUTO_STOPCCSD		BIT(9)
+#define SDXC_CEATA_DEV_IRQ_ENABLE	BIT(10)
+
+/* IDMA controller bus mod bit field */
+#define SDXC_IDMAC_SOFT_RESET		BIT(0)
+#define SDXC_IDMAC_FIX_BURST		BIT(1)
+#define SDXC_IDMAC_IDMA_ON		BIT(7)
+#define SDXC_IDMAC_REFETCH_DES		BIT(31)
+
+/* IDMA status bit field */
+#define SDXC_IDMAC_TRANSMIT_INTERRUPT		BIT(0)
+#define SDXC_IDMAC_RECEIVE_INTERRUPT		BIT(1)
+#define SDXC_IDMAC_FATAL_BUS_ERROR		BIT(2)
+#define SDXC_IDMAC_DESTINATION_INVALID		BIT(4)
+#define SDXC_IDMAC_CARD_ERROR_SUM		BIT(5)
+#define SDXC_IDMAC_NORMAL_INTERRUPT_SUM		BIT(8)
+#define SDXC_IDMAC_ABNORMAL_INTERRUPT_SUM	BIT(9)
+#define SDXC_IDMAC_HOST_ABORT_INTERRUPT		BIT(10)
+#define SDXC_IDMAC_IDLE				(0 << 13)
+#define SDXC_IDMAC_SUSPEND			(1 << 13)
+#define SDXC_IDMAC_DESC_READ			(2 << 13)
+#define SDXC_IDMAC_DESC_CHECK			(3 << 13)
+#define SDXC_IDMAC_READ_REQUEST_WAIT		(4 << 13)
+#define SDXC_IDMAC_WRITE_REQUEST_WAIT		(5 << 13)
+#define SDXC_IDMAC_READ				(6 << 13)
+#define SDXC_IDMAC_WRITE			(7 << 13)
+#define SDXC_IDMAC_DESC_CLOSE			(8 << 13)
+
+/*
+* If the idma-des-size-bits of property is ie 13, bufsize bits are:
+*  Bits  0-12: buf1 size
+*  Bits 13-25: buf2 size
+*  Bits 26-31: not used
+* Since we only ever set buf1 size, we can simply store it directly.
+*/
+#define SDXC_IDMAC_DES0_DIC	BIT(1)  /* disable interrupt on completion */
+#define SDXC_IDMAC_DES0_LD	BIT(2)  /* last descriptor */
+#define SDXC_IDMAC_DES0_FD	BIT(3)  /* first descriptor */
+#define SDXC_IDMAC_DES0_CH	BIT(4)  /* chain mode */
+#define SDXC_IDMAC_DES0_ER	BIT(5)  /* end of ring */
+#define SDXC_IDMAC_DES0_CES	BIT(30) /* card error summary */
+#define SDXC_IDMAC_DES0_OWN	BIT(31) /* 1-idma owns it, 0-host owns it */
+
+struct sunxi_idma_des {
+	u32	config;
+	u32	buf_size;
+	u32	buf_addr_ptr1;
+	u32	buf_addr_ptr2;
+};
+
+struct sunxi_mmc_host {
+	struct mmc_host	*mmc;
+	struct reset_control *reset;
+
+	/* IO mapping base */
+	void __iomem	*reg_base;
+
+	/* clock management */
+	struct clk	*clk_ahb;
+	struct clk	*clk_mmc;
+
+	/* irq */
+	spinlock_t	lock;
+	int		irq;
+	u32		int_sum;
+	u32		sdio_imask;
+
+	/* dma */
+	u32		idma_des_size_bits;
+	dma_addr_t	sg_dma;
+	void		*sg_cpu;
+	bool		wait_dma;
+
+	struct mmc_request *mrq;
+	struct mmc_request *manual_stop_mrq;
+	int		ferror;
+};
+
+static int sunxi_mmc_reset_host(struct sunxi_mmc_host *host)
+{
+	unsigned long expire = jiffies + msecs_to_jiffies(250);
+	u32 rval;
+
+	mmc_writel(host, REG_CMDR, SDXC_HARDWARE_RESET);
+	do {
+		rval = mmc_readl(host, REG_GCTRL);
+	} while (time_before(jiffies, expire) && (rval & SDXC_HARDWARE_RESET));
+
+	if (rval & SDXC_HARDWARE_RESET) {
+		dev_err(mmc_dev(host->mmc), "fatal err reset timeout\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int sunxi_mmc_init_host(struct mmc_host *mmc)
+{
+	u32 rval;
+	struct sunxi_mmc_host *host = mmc_priv(mmc);
+
+	if (sunxi_mmc_reset_host(host))
+		return -EIO;
+
+	mmc_writel(host, REG_FTRGL, 0x20070008);
+	mmc_writel(host, REG_TMOUT, 0xffffffff);
+	mmc_writel(host, REG_IMASK, host->sdio_imask);
+	mmc_writel(host, REG_RINTR, 0xffffffff);
+	mmc_writel(host, REG_DBGC, 0xdeb);
+	mmc_writel(host, REG_FUNS, SDXC_CEATA_ON);
+	mmc_writel(host, REG_DLBA, host->sg_dma);
+
+	rval = mmc_readl(host, REG_GCTRL);
+	rval |= SDXC_INTERRUPT_ENABLE_BIT;
+	rval &= ~SDXC_ACCESS_DONE_DIRECT;
+	mmc_writel(host, REG_GCTRL, rval);
+
+	return 0;
+}
+
+static void sunxi_mmc_init_idma_des(struct sunxi_mmc_host *host,
+				    struct mmc_data *data)
+{
+	struct sunxi_idma_des *pdes = (struct sunxi_idma_des *)host->sg_cpu;
+	struct sunxi_idma_des *pdes_pa = (struct sunxi_idma_des *)host->sg_dma;
+	int i, max_len = (1 << host->idma_des_size_bits);
+
+	for (i = 0; i < data->sg_len; i++) {
+		pdes[i].config = SDXC_IDMAC_DES0_CH | SDXC_IDMAC_DES0_OWN |
+				 SDXC_IDMAC_DES0_DIC;
+
+		if (data->sg[i].length == max_len)
+			pdes[i].buf_size = 0; /* 0 == max_len */
+		else
+			pdes[i].buf_size = data->sg[i].length;
+
+		pdes[i].buf_addr_ptr1 = sg_dma_address(&data->sg[i]);
+		pdes[i].buf_addr_ptr2 = (u32)&pdes_pa[i + 1];
+	}
+
+	pdes[0].config |= SDXC_IDMAC_DES0_FD;
+	pdes[i - 1].config = SDXC_IDMAC_DES0_OWN | SDXC_IDMAC_DES0_LD;
+
+	/*
+	 * Avoid the io-store starting the idmac hitting io-mem before the
+	 * descriptors hit the main-mem.
+	 */
+	wmb();
+}
+
+static enum dma_data_direction sunxi_mmc_get_dma_dir(struct mmc_data *data)
+{
+	if (data->flags & MMC_DATA_WRITE)
+		return DMA_TO_DEVICE;
+	else
+		return DMA_FROM_DEVICE;
+}
+
+static int sunxi_mmc_map_dma(struct sunxi_mmc_host *host,
+			     struct mmc_data *data)
+{
+	u32 i, dma_len;
+	struct scatterlist *sg;
+
+	dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
+			     sunxi_mmc_get_dma_dir(data));
+	if (dma_len == 0) {
+		dev_err(mmc_dev(host->mmc), "dma_map_sg failed\n");
+		return -ENOMEM;
+	}
+
+	for_each_sg(data->sg, sg, data->sg_len, i) {
+		if (sg->offset & 3 || sg->length & 3) {
+			dev_err(mmc_dev(host->mmc),
+				"unaligned scatterlist: os %x length %d\n",
+				sg->offset, sg->length);
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+static void sunxi_mmc_start_dma(struct sunxi_mmc_host *host,
+				struct mmc_data *data)
+{
+	u32 rval;
+
+	sunxi_mmc_init_idma_des(host, data);
+
+	rval = mmc_readl(host, REG_GCTRL);
+	rval |= SDXC_DMA_ENABLE_BIT;
+	mmc_writel(host, REG_GCTRL, rval);
+	rval |= SDXC_DMA_RESET;
+	mmc_writel(host, REG_GCTRL, rval);
+
+	mmc_writel(host, REG_DMAC, SDXC_IDMAC_SOFT_RESET);
+
+	if (!(data->flags & MMC_DATA_WRITE))
+		mmc_writel(host, REG_IDIE, SDXC_IDMAC_RECEIVE_INTERRUPT);
+
+	mmc_writel(host, REG_DMAC,
+		   SDXC_IDMAC_FIX_BURST | SDXC_IDMAC_IDMA_ON);
+}
+
+static void sunxi_mmc_send_manual_stop(struct sunxi_mmc_host *host,
+				       struct mmc_request *req)
+{
+	u32 arg, cmd_val, ri;
+	unsigned long expire = jiffies + msecs_to_jiffies(1000);
+
+	cmd_val = SDXC_START | SDXC_RESP_EXPIRE |
+		  SDXC_STOP_ABORT_CMD | SDXC_CHECK_RESPONSE_CRC;
+
+	if (req->cmd->opcode == SD_IO_RW_EXTENDED) {
+		cmd_val |= SD_IO_RW_DIRECT;
+		arg = (1 << 31) | (0 << 28) | (SDIO_CCCR_ABORT << 9) |
+		      ((req->cmd->arg >> 28) & 0x7);
+	} else {
+		cmd_val |= MMC_STOP_TRANSMISSION;
+		arg = 0;
+	}
+
+	mmc_writel(host, REG_CARG, arg);
+	mmc_writel(host, REG_CMDR, cmd_val);
+
+	do {
+		ri = mmc_readl(host, REG_RINTR);
+	} while (!(ri & (SDXC_COMMAND_DONE | SDXC_INTERRUPT_ERROR_BIT)) &&
+		 time_before(jiffies, expire));
+
+	if (!(ri & SDXC_COMMAND_DONE) || (ri & SDXC_INTERRUPT_ERROR_BIT)) {
+		dev_err(mmc_dev(host->mmc), "send stop command failed\n");
+		if (req->stop)
+			req->stop->resp[0] = -ETIMEDOUT;
+	} else {
+		if (req->stop)
+			req->stop->resp[0] = mmc_readl(host, REG_RESP0);
+	}
+
+	mmc_writel(host, REG_RINTR, 0xffff);
+}
+
+static void sunxi_mmc_dump_errinfo(struct sunxi_mmc_host *host)
+{
+	struct mmc_command *cmd = host->mrq->cmd;
+	struct mmc_data *data = host->mrq->data;
+
+	/* For some cmds timeout is normal with sd/mmc cards */
+	if ((host->int_sum & SDXC_INTERRUPT_ERROR_BIT) ==
+		SDXC_RESP_TIMEOUT && (cmd->opcode == SD_IO_SEND_OP_COND ||
+				      cmd->opcode == SD_IO_RW_DIRECT))
+		return;
+
+	dev_err(mmc_dev(host->mmc),
+		"smc %d err, cmd %d,%s%s%s%s%s%s%s%s%s%s !!\n",
+		host->mmc->index, cmd->opcode,
+		data ? (data->flags & MMC_DATA_WRITE ? " WR" : " RD") : "",
+		host->int_sum & SDXC_RESP_ERROR     ? " RE"     : "",
+		host->int_sum & SDXC_RESP_CRC_ERROR  ? " RCE"    : "",
+		host->int_sum & SDXC_DATA_CRC_ERROR  ? " DCE"    : "",
+		host->int_sum & SDXC_RESP_TIMEOUT ? " RTO"    : "",
+		host->int_sum & SDXC_DATA_TIMEOUT ? " DTO"    : "",
+		host->int_sum & SDXC_FIFO_RUN_ERROR  ? " FE"     : "",
+		host->int_sum & SDXC_HARD_WARE_LOCKED ? " HL"     : "",
+		host->int_sum & SDXC_START_BIT_ERROR ? " SBE"    : "",
+		host->int_sum & SDXC_END_BIT_ERROR   ? " EBE"    : ""
+		);
+}
+
+/* Called in interrupt context! */
+static irqreturn_t sunxi_mmc_finalize_request(struct sunxi_mmc_host *host)
+{
+	struct mmc_request *mrq = host->mrq;
+	struct mmc_data *data = mrq->data;
+	u32 rval;
+
+	mmc_writel(host, REG_IMASK, host->sdio_imask);
+	mmc_writel(host, REG_IDIE, 0);
+
+	if (host->int_sum & SDXC_INTERRUPT_ERROR_BIT) {
+		sunxi_mmc_dump_errinfo(host);
+		mrq->cmd->error = -ETIMEDOUT;
+
+		if (data) {
+			data->error = -ETIMEDOUT;
+			host->manual_stop_mrq = mrq;
+		}
+
+		if (mrq->stop)
+			mrq->stop->error = -ETIMEDOUT;
+	} else {
+		if (mrq->cmd->flags & MMC_RSP_136) {
+			mrq->cmd->resp[0] = mmc_readl(host, REG_RESP3);
+			mrq->cmd->resp[1] = mmc_readl(host, REG_RESP2);
+			mrq->cmd->resp[2] = mmc_readl(host, REG_RESP1);
+			mrq->cmd->resp[3] = mmc_readl(host, REG_RESP0);
+		} else {
+			mrq->cmd->resp[0] = mmc_readl(host, REG_RESP0);
+		}
+
+		if (data)
+			data->bytes_xfered = data->blocks * data->blksz;
+	}
+
+	if (data) {
+		mmc_writel(host, REG_IDST, 0x337);
+		mmc_writel(host, REG_DMAC, 0);
+		rval = mmc_readl(host, REG_GCTRL);
+		rval |= SDXC_DMA_RESET;
+		mmc_writel(host, REG_GCTRL, rval);
+		rval &= ~SDXC_DMA_ENABLE_BIT;
+		mmc_writel(host, REG_GCTRL, rval);
+		rval |= SDXC_FIFO_RESET;
+		mmc_writel(host, REG_GCTRL, rval);
+		dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
+				     sunxi_mmc_get_dma_dir(data));
+	}
+
+	mmc_writel(host, REG_RINTR, 0xffff);
+
+	host->mrq = NULL;
+	host->int_sum = 0;
+	host->wait_dma = false;
+
+	return host->manual_stop_mrq ? IRQ_WAKE_THREAD : IRQ_HANDLED;
+}
+
+static irqreturn_t sunxi_mmc_irq(int irq, void *dev_id)
+{
+	struct sunxi_mmc_host *host = dev_id;
+	struct mmc_request *mrq;
+	u32 msk_int, idma_int;
+	bool finalize = false;
+	bool sdio_int = false;
+	irqreturn_t ret = IRQ_HANDLED;
+
+	spin_lock(&host->lock);
+
+	idma_int  = mmc_readl(host, REG_IDST);
+	msk_int   = mmc_readl(host, REG_MISTA);
+
+	dev_dbg(mmc_dev(host->mmc), "irq: rq %p mi %08x idi %08x\n",
+		host->mrq, msk_int, idma_int);
+
+	mrq = host->mrq;
+	if (mrq) {
+		if (idma_int & SDXC_IDMAC_RECEIVE_INTERRUPT)
+			host->wait_dma = false;
+
+		host->int_sum |= msk_int;
+
+		/* Wait for COMMAND_DONE on RESPONSE_TIMEOUT before finalize */
+		if ((host->int_sum & SDXC_RESP_TIMEOUT) &&
+				!(host->int_sum & SDXC_COMMAND_DONE))
+			mmc_writel(host, REG_IMASK,
+				   host->sdio_imask | SDXC_COMMAND_DONE);
+		/* Don't wait for dma on error */
+		else if (host->int_sum & SDXC_INTERRUPT_ERROR_BIT)
+			finalize = true;
+		else if ((host->int_sum & SDXC_INTERRUPT_DONE_BIT) &&
+				!host->wait_dma)
+			finalize = true;
+	}
+
+	if (msk_int & SDXC_SDIO_INTERRUPT)
+		sdio_int = true;
+
+	mmc_writel(host, REG_RINTR, msk_int);
+	mmc_writel(host, REG_IDST, idma_int);
+
+	if (finalize)
+		ret = sunxi_mmc_finalize_request(host);
+
+	spin_unlock(&host->lock);
+
+	if (finalize && ret == IRQ_HANDLED)
+		mmc_request_done(host->mmc, mrq);
+
+	if (sdio_int)
+		mmc_signal_sdio_irq(host->mmc);
+
+	return ret;
+}
+
+static irqreturn_t sunxi_mmc_handle_manual_stop(int irq, void *dev_id)
+{
+	struct sunxi_mmc_host *host = dev_id;
+	struct mmc_request *mrq;
+	unsigned long iflags;
+
+	spin_lock_irqsave(&host->lock, iflags);
+	mrq = host->manual_stop_mrq;
+	spin_unlock_irqrestore(&host->lock, iflags);
+
+	if (!mrq) {
+		dev_err(mmc_dev(host->mmc), "no request for manual stop\n");
+		return IRQ_HANDLED;
+	}
+
+	dev_err(mmc_dev(host->mmc), "data error, sending stop command\n");
+	sunxi_mmc_send_manual_stop(host, mrq);
+
+	spin_lock_irqsave(&host->lock, iflags);
+	host->manual_stop_mrq = NULL;
+	spin_unlock_irqrestore(&host->lock, iflags);
+
+	mmc_request_done(host->mmc, mrq);
+
+	return IRQ_HANDLED;
+}
+
+static int sunxi_mmc_oclk_onoff(struct sunxi_mmc_host *host, u32 oclk_en)
+{
+	unsigned long expire = jiffies + msecs_to_jiffies(250);
+	u32 rval;
+
+	rval = mmc_readl(host, REG_CLKCR);
+	rval &= ~(SDXC_CARD_CLOCK_ON | SDXC_LOW_POWER_ON);
+
+	if (oclk_en)
+		rval |= SDXC_CARD_CLOCK_ON;
+
+	mmc_writel(host, REG_CLKCR, rval);
+
+	rval = SDXC_START | SDXC_UPCLK_ONLY | SDXC_WAIT_PRE_OVER;
+	mmc_writel(host, REG_CMDR, rval);
+
+	do {
+		rval = mmc_readl(host, REG_CMDR);
+	} while (time_before(jiffies, expire) && (rval & SDXC_START));
+
+	/* clear irq status bits set by the command */
+	mmc_writel(host, REG_RINTR,
+		   mmc_readl(host, REG_RINTR) & ~SDXC_SDIO_INTERRUPT);
+
+	if (rval & SDXC_START) {
+		dev_err(mmc_dev(host->mmc), "fatal err update clk timeout\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int sunxi_mmc_clk_set_rate(struct sunxi_mmc_host *host,
+				  struct mmc_ios *ios)
+{
+	u32 rate, oclk_dly, rval, sclk_dly, src_clk;
+	int ret;
+
+	rate = clk_round_rate(host->clk_mmc, ios->clock);
+	dev_dbg(mmc_dev(host->mmc), "setting clk to %d, rounded %d\n",
+		ios->clock, rate);
+
+	/* setting clock rate */
+	ret = clk_set_rate(host->clk_mmc, rate);
+	if (ret) {
+		dev_err(mmc_dev(host->mmc), "error setting clk to %d: %d\n",
+			rate, ret);
+		return ret;
+	}
+
+	ret = sunxi_mmc_oclk_onoff(host, 0);
+	if (ret)
+		return ret;
+
+	/* clear internal divider */
+	rval = mmc_readl(host, REG_CLKCR);
+	rval &= ~0xff;
+	mmc_writel(host, REG_CLKCR, rval);
+
+	/* determine delays */
+	if (rate <= 400000) {
+		oclk_dly = 0;
+		sclk_dly = 7;
+	} else if (rate <= 25000000) {
+		oclk_dly = 0;
+		sclk_dly = 5;
+	} else if (rate <= 50000000) {
+		if (ios->timing == MMC_TIMING_UHS_DDR50) {
+			oclk_dly = 2;
+			sclk_dly = 4;
+		} else {
+			oclk_dly = 3;
+			sclk_dly = 5;
+		}
+	} else {
+		/* rate > 50000000 */
+		oclk_dly = 2;
+		sclk_dly = 4;
+	}
+
+	src_clk = clk_get_rate(clk_get_parent(host->clk_mmc));
+	if (src_clk >= 300000000 && src_clk <= 400000000) {
+		if (oclk_dly)
+			oclk_dly--;
+		if (sclk_dly)
+			sclk_dly--;
+	}
+
+	clk_sunxi_mmc_phase_control(host->clk_mmc, sclk_dly, oclk_dly);
+
+	return sunxi_mmc_oclk_onoff(host, 1);
+}
+
+static void sunxi_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	struct sunxi_mmc_host *host = mmc_priv(mmc);
+	u32 rval;
+
+	/* Set the power state */
+	switch (ios->power_mode) {
+	case MMC_POWER_ON:
+		break;
+
+	case MMC_POWER_UP:
+		mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd);
+
+		host->ferror = sunxi_mmc_init_host(mmc);
+		if (host->ferror)
+			return;
+
+		dev_dbg(mmc_dev(mmc), "power on!\n");
+		break;
+
+	case MMC_POWER_OFF:
+		dev_dbg(mmc_dev(mmc), "power off!\n");
+		sunxi_mmc_reset_host(host);
+		mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
+		break;
+	}
+
+	/* set bus width */
+	switch (ios->bus_width) {
+	case MMC_BUS_WIDTH_1:
+		mmc_writel(host, REG_WIDTH, SDXC_WIDTH1);
+		break;
+	case MMC_BUS_WIDTH_4:
+		mmc_writel(host, REG_WIDTH, SDXC_WIDTH4);
+		break;
+	case MMC_BUS_WIDTH_8:
+		mmc_writel(host, REG_WIDTH, SDXC_WIDTH8);
+		break;
+	}
+
+	/* set ddr mode */
+	rval = mmc_readl(host, REG_GCTRL);
+	if (ios->timing == MMC_TIMING_UHS_DDR50)
+		rval |= SDXC_DDR_MODE;
+	else
+		rval &= ~SDXC_DDR_MODE;
+	mmc_writel(host, REG_GCTRL, rval);
+
+	/* set up clock */
+	if (ios->clock && ios->power_mode) {
+		host->ferror = sunxi_mmc_clk_set_rate(host, ios);
+		/* Android code had a usleep_range(50000, 55000); here */
+	}
+}
+
+static void sunxi_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
+{
+	struct sunxi_mmc_host *host = mmc_priv(mmc);
+	unsigned long flags;
+	u32 imask;
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	imask = mmc_readl(host, REG_IMASK);
+	if (enable) {
+		host->sdio_imask = SDXC_SDIO_INTERRUPT;
+		imask |= SDXC_SDIO_INTERRUPT;
+	} else {
+		host->sdio_imask = 0;
+		imask &= ~SDXC_SDIO_INTERRUPT;
+	}
+	mmc_writel(host, REG_IMASK, imask);
+	spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static void sunxi_mmc_hw_reset(struct mmc_host *mmc)
+{
+	struct sunxi_mmc_host *host = mmc_priv(mmc);
+	mmc_writel(host, REG_HWRST, 0);
+	udelay(10);
+	mmc_writel(host, REG_HWRST, 1);
+	udelay(300);
+}
+
+static void sunxi_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+	struct sunxi_mmc_host *host = mmc_priv(mmc);
+	struct mmc_command *cmd = mrq->cmd;
+	struct mmc_data *data = mrq->data;
+	unsigned long iflags;
+	u32 imask = SDXC_INTERRUPT_ERROR_BIT;
+	u32 cmd_val = SDXC_START | (cmd->opcode & 0x3f);
+	int ret;
+
+	/* Check for set_ios errors (should never happen) */
+	if (host->ferror) {
+		mrq->cmd->error = host->ferror;
+		mmc_request_done(mmc, mrq);
+		return;
+	}
+
+	if (data) {
+		ret = sunxi_mmc_map_dma(host, data);
+		if (ret < 0) {
+			dev_err(mmc_dev(mmc), "map DMA failed\n");
+			cmd->error = ret;
+			data->error = ret;
+			mmc_request_done(mmc, mrq);
+			return;
+		}
+	}
+
+	if (cmd->opcode == MMC_GO_IDLE_STATE) {
+		cmd_val |= SDXC_SEND_INIT_SEQUENCE;
+		imask |= SDXC_COMMAND_DONE;
+	}
+
+	if (cmd->flags & MMC_RSP_PRESENT) {
+		cmd_val |= SDXC_RESP_EXPIRE;
+		if (cmd->flags & MMC_RSP_136)
+			cmd_val |= SDXC_LONG_RESPONSE;
+		if (cmd->flags & MMC_RSP_CRC)
+			cmd_val |= SDXC_CHECK_RESPONSE_CRC;
+
+		if ((cmd->flags & MMC_CMD_MASK) == MMC_CMD_ADTC) {
+			cmd_val |= SDXC_DATA_EXPIRE | SDXC_WAIT_PRE_OVER;
+			if (cmd->data->flags & MMC_DATA_STREAM) {
+				imask |= SDXC_AUTO_COMMAND_DONE;
+				cmd_val |= SDXC_SEQUENCE_MODE |
+					   SDXC_SEND_AUTO_STOP;
+			}
+
+			if (cmd->data->stop) {
+				imask |= SDXC_AUTO_COMMAND_DONE;
+				cmd_val |= SDXC_SEND_AUTO_STOP;
+			} else {
+				imask |= SDXC_DATA_OVER;
+			}
+
+			if (cmd->data->flags & MMC_DATA_WRITE)
+				cmd_val |= SDXC_WRITE;
+			else
+				host->wait_dma = true;
+		} else {
+			imask |= SDXC_COMMAND_DONE;
+		}
+	} else {
+		imask |= SDXC_COMMAND_DONE;
+	}
+
+	dev_dbg(mmc_dev(mmc), "cmd %d(%08x) arg %x ie 0x%08x len %d\n",
+		cmd_val & 0x3f, cmd_val, cmd->arg, imask,
+		mrq->data ? mrq->data->blksz * mrq->data->blocks : 0);
+
+	spin_lock_irqsave(&host->lock, iflags);
+
+	if (host->mrq || host->manual_stop_mrq) {
+		spin_unlock_irqrestore(&host->lock, iflags);
+
+		if (data)
+			dma_unmap_sg(mmc_dev(mmc), data->sg, data->sg_len,
+				     sunxi_mmc_get_dma_dir(data));
+
+		dev_err(mmc_dev(mmc), "request already pending\n");
+		mrq->cmd->error = -EBUSY;
+		mmc_request_done(mmc, mrq);
+		return;
+	}
+
+	if (data) {
+		mmc_writel(host, REG_BLKSZ, data->blksz);
+		mmc_writel(host, REG_BCNTR, data->blksz * data->blocks);
+		sunxi_mmc_start_dma(host, data);
+	}
+
+	host->mrq = mrq;
+	mmc_writel(host, REG_IMASK, host->sdio_imask | imask);
+	mmc_writel(host, REG_CARG, cmd->arg);
+	mmc_writel(host, REG_CMDR, cmd_val);
+
+	spin_unlock_irqrestore(&host->lock, iflags);
+}
+
+static const struct of_device_id sunxi_mmc_of_match[] = {
+	{ .compatible = "allwinner,sun4i-a10-mmc", },
+	{ .compatible = "allwinner,sun5i-a13-mmc", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, sunxi_mmc_of_match);
+
+static struct mmc_host_ops sunxi_mmc_ops = {
+	.request	 = sunxi_mmc_request,
+	.set_ios	 = sunxi_mmc_set_ios,
+	.get_ro		 = mmc_gpio_get_ro,
+	.get_cd		 = mmc_gpio_get_cd,
+	.enable_sdio_irq = sunxi_mmc_enable_sdio_irq,
+	.hw_reset	 = sunxi_mmc_hw_reset,
+};
+
+static int sunxi_mmc_resource_request(struct sunxi_mmc_host *host,
+				      struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	int ret;
+
+	if (of_device_is_compatible(np, "allwinner,sun4i-a10-mmc"))
+		host->idma_des_size_bits = 13;
+	else
+		host->idma_des_size_bits = 16;
+
+	ret = mmc_regulator_get_supply(host->mmc);
+	if (ret) {
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Could not get vmmc supply\n");
+		return ret;
+	}
+
+	host->reg_base = devm_ioremap_resource(&pdev->dev,
+			      platform_get_resource(pdev, IORESOURCE_MEM, 0));
+	if (IS_ERR(host->reg_base))
+		return PTR_ERR(host->reg_base);
+
+	host->clk_ahb = devm_clk_get(&pdev->dev, "ahb");
+	if (IS_ERR(host->clk_ahb)) {
+		dev_err(&pdev->dev, "Could not get ahb clock\n");
+		return PTR_ERR(host->clk_ahb);
+	}
+
+	host->clk_mmc = devm_clk_get(&pdev->dev, "mmc");
+	if (IS_ERR(host->clk_mmc)) {
+		dev_err(&pdev->dev, "Could not get mmc clock\n");
+		return PTR_ERR(host->clk_mmc);
+	}
+
+	host->reset = devm_reset_control_get(&pdev->dev, "ahb");
+
+	ret = clk_prepare_enable(host->clk_ahb);
+	if (ret) {
+		dev_err(&pdev->dev, "Enable ahb clk err %d\n", ret);
+		return ret;
+	}
+
+	ret = clk_prepare_enable(host->clk_mmc);
+	if (ret) {
+		dev_err(&pdev->dev, "Enable mmc clk err %d\n", ret);
+		goto error_disable_clk_ahb;
+	}
+
+	if (!IS_ERR(host->reset)) {
+		ret = reset_control_deassert(host->reset);
+		if (ret) {
+			dev_err(&pdev->dev, "reset err %d\n", ret);
+			goto error_disable_clk_mmc;
+		}
+	}
+
+	/*
+	 * Sometimes the controller asserts the irq on boot for some reason,
+	 * make sure the controller is in a sane state before enabling irqs.
+	 */
+	ret = sunxi_mmc_reset_host(host);
+	if (ret)
+		goto error_assert_reset;
+
+	host->irq = platform_get_irq(pdev, 0);
+	return devm_request_threaded_irq(&pdev->dev, host->irq, sunxi_mmc_irq,
+			sunxi_mmc_handle_manual_stop, 0, "sunxi-mmc", host);
+
+error_assert_reset:
+	if (!IS_ERR(host->reset))
+		reset_control_assert(host->reset);
+error_disable_clk_mmc:
+	clk_disable_unprepare(host->clk_mmc);
+error_disable_clk_ahb:
+	clk_disable_unprepare(host->clk_ahb);
+	return ret;
+}
+
+static int sunxi_mmc_probe(struct platform_device *pdev)
+{
+	struct sunxi_mmc_host *host;
+	struct mmc_host *mmc;
+	int ret;
+
+	mmc = mmc_alloc_host(sizeof(struct sunxi_mmc_host), &pdev->dev);
+	if (!mmc) {
+		dev_err(&pdev->dev, "mmc alloc host failed\n");
+		return -ENOMEM;
+	}
+
+	host = mmc_priv(mmc);
+	host->mmc = mmc;
+	spin_lock_init(&host->lock);
+
+	ret = sunxi_mmc_resource_request(host, pdev);
+	if (ret)
+		goto error_free_host;
+
+	host->sg_cpu = dma_alloc_coherent(&pdev->dev, PAGE_SIZE,
+					  &host->sg_dma, GFP_KERNEL);
+	if (!host->sg_cpu) {
+		dev_err(&pdev->dev, "Failed to allocate DMA descriptor mem\n");
+		ret = -ENOMEM;
+		goto error_free_host;
+	}
+
+	mmc->ops		= &sunxi_mmc_ops;
+	mmc->max_blk_count	= 8192;
+	mmc->max_blk_size	= 4096;
+	mmc->max_segs		= PAGE_SIZE / sizeof(struct sunxi_idma_des);
+	mmc->max_seg_size	= (1 << host->idma_des_size_bits);
+	mmc->max_req_size	= mmc->max_seg_size * mmc->max_segs;
+	/* 400kHz ~ 50MHz */
+	mmc->f_min		=   400000;
+	mmc->f_max		= 50000000;
+	mmc->caps	       |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED;
+
+	ret = mmc_of_parse(mmc);
+	if (ret)
+		goto error_free_dma;
+
+	ret = mmc_add_host(mmc);
+	if (ret)
+		goto error_free_dma;
+
+	dev_info(&pdev->dev, "base:0x%p irq:%u\n", host->reg_base, host->irq);
+	platform_set_drvdata(pdev, mmc);
+	return 0;
+
+error_free_dma:
+	dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
+error_free_host:
+	mmc_free_host(mmc);
+	return ret;
+}
+
+static int sunxi_mmc_remove(struct platform_device *pdev)
+{
+	struct mmc_host	*mmc = platform_get_drvdata(pdev);
+	struct sunxi_mmc_host *host = mmc_priv(mmc);
+
+	mmc_remove_host(mmc);
+	disable_irq(host->irq);
+	sunxi_mmc_reset_host(host);
+
+	if (!IS_ERR(host->reset))
+		reset_control_assert(host->reset);
+
+	clk_disable_unprepare(host->clk_mmc);
+	clk_disable_unprepare(host->clk_ahb);
+
+	dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
+	mmc_free_host(mmc);
+
+	return 0;
+}
+
+static struct platform_driver sunxi_mmc_driver = {
+	.driver = {
+		.name	= "sunxi-mmc",
+		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(sunxi_mmc_of_match),
+	},
+	.probe		= sunxi_mmc_probe,
+	.remove		= sunxi_mmc_remove,
+};
+module_platform_driver(sunxi_mmc_driver);
+
+MODULE_DESCRIPTION("Allwinner's SD/MMC Card Controller Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("David Lanzend�rfer <david.lanzendoerfer@o2s.ch>");
+MODULE_ALIAS("platform:sunxi-mmc");
-- 
cgit v1.2.3