From 30a70b026b4cde4e51989661ff3bd0ede08d9646 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 6 Feb 2014 21:25:37 +0200 Subject: usb: musb: fix obex in g_nokia.ko causing kernel panic MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit phy_power_off() can, depending on the PHY being used, start I2C transactions which shouldn't happen in atomic context. Current call to phy_power_off() inside omap2430_runtime callbacks causes the following dump, as a fix, just don't power off the PHY in runtime. [ 18.606414] [] (__schedule+0x5c/0x50c) from [] (schedule_timeout+0x1f4/0x25c) [ 18.623809] [] (schedule_timeout+0x1f4/0x25c) from [] (wait_for_common+0xc8/0x1ac) [ 18.649291] [] (wait_for_common+0xc8/0x1ac) from [] (omap_i2c_xfer+0x338/0x488) [ 18.674499] [] (omap_i2c_xfer+0x338/0x488) from [] (__i2c_transfer+0x40/0x74) [ 18.692047] [] (__i2c_transfer+0x40/0x74) from [] (i2c_transfer+0x6c/0x90) [ 18.709320] [] (i2c_transfer+0x6c/0x90) from [] (regmap_i2c_read+0x48/0x68) [ 18.726715] [] (regmap_i2c_read+0x48/0x68) from [] (_regmap_raw_read+0x128/0x220) [ 18.752685] [] (_regmap_raw_read+0x128/0x220) from [] (regmap_raw_read+0xa0/0x130) [ 18.779052] [] (regmap_raw_read+0xa0/0x130) from [] (regmap_bulk_read+0xf8/0x16c) [ 18.805694] [] (regmap_bulk_read+0xf8/0x16c) from [] (twl_i2c_read+0xa4/0xe0) [ 18.823730] [] (twl_i2c_read+0xa4/0xe0) from [] (__twl4030_phy_power.isra.12+0x1c/0x58) [ 18.850921] [] (__twl4030_phy_power.isra.12+0x1c/0x58) from [] (twl4030_phy_power.part.14+0x80/0xc8) [ 18.879699] [] (twl4030_phy_power.part.14+0x80/0xc8) from [] (twl4030_set_suspend+0x54/0x1e8) [ 18.908325] [] (twl4030_set_suspend+0x54/0x1e8) from [] (omap2430_runtime_resume+0x5c/0x64) [ 18.937042] [] (omap2430_runtime_resume+0x5c/0x64) from [] (pm_generic_runtime_resume+0x2c/0x38) [ 18.966461] [] (pm_generic_runtime_resume+0x2c/0x38) from [] (__rpm_callback+0x54/0x80) [ 18.995117] [] (__rpm_callback+0x54/0x80) from [] (rpm_callback+0x40/0x74) [ 19.013610] [] (rpm_callback+0x40/0x74) from [] (rpm_resume+0x448/0x63c) [ 19.031921] [] (rpm_resume+0x448/0x63c) from [] (rpm_resume+0x364/0x63c) [ 19.050140] [] (rpm_resume+0x364/0x63c) from [] (__pm_runtime_resume+0x48/0x74) [ 19.077728] [] (__pm_runtime_resume+0x48/0x74) from [] (musb_gadget_pullup+0x1c/0xb4) [ 19.105895] [] (musb_gadget_pullup+0x1c/0xb4) from [] (usb_function_deactivate+0x54/0xa4 [libcomposite]) [ 19.135955] [] (usb_function_deactivate+0x54/0xa4 [libcomposite]) from [] (obex_bind+0x124/0x1d8 [usb_f_obex]) [ 19.166870] [] (obex_bind+0x124/0x1d8 [usb_f_obex]) from [] (usb_add_function+0x58/0xf4 [libcomposite]) [ 19.197143] [] (usb_add_function+0x58/0xf4 [libcomposite]) from [] (nokia_bind_config+0x204/0x250 [g_nokia]) [ 19.227905] [] (nokia_bind_config+0x204/0x250 [g_nokia]) from [] (usb_add_config+0x28/0xc0 [libcomposite]) [ 19.258483] [] (usb_add_config+0x28/0xc0 [libcomposite]) from [] (nokia_bind+0x9c/0x21c [g_nokia]) [ 19.288421] [] (nokia_bind+0x9c/0x21c [g_nokia]) from [] (composite_bind+0x74/0x180 [libcomposite]) [ 19.318420] [] (composite_bind+0x74/0x180 [libcomposite]) from [] (udc_bind_to_driver+0x2c/0xc4) [ 19.348114] [] (udc_bind_to_driver+0x2c/0xc4) from [] (usb_gadget_probe_driver+0x74/0x94) [ 19.377166] [] (usb_gadget_probe_driver+0x74/0x94) from [] (do_one_initcall+0x94/0x138) [ 19.406005] [] (do_one_initcall+0x94/0x138) from [] (load_module+0x113c/0x13c4) [ 19.434051] [] (load_module+0x113c/0x13c4) from [] (SyS_init_module+0xcc/0xec) [ 19.462127] [] (SyS_init_module+0xcc/0xec) from [] (ret_fast_syscall+0x0/0x30) [ 19.490753] Code: 0a00002e e1a00004 eb001438 e598300c (e5d3202c) [ 19.506805] ---[ end trace 060b62ec0d68a78b ]--- [ 19.523132] Kernel panic - not syncing: Fatal exception in interrupt dump is from 3.12-rc5 kernel Reported-by: Pali Rohár Signed-off-by: Ivaylo Dimitrov Signed-off-by: Felipe Balbi --- drivers/usb/musb/omap2430.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 2a408cdaf7b2..8aa59a2c5eb2 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -659,7 +659,6 @@ static int omap2430_runtime_suspend(struct device *dev) OTG_INTERFSEL); omap2430_low_level_exit(musb); - phy_power_off(musb->phy); } return 0; @@ -674,7 +673,6 @@ static int omap2430_runtime_resume(struct device *dev) omap2430_low_level_init(musb); musb_writel(musb->mregs, OTG_INTERFSEL, musb->context.otg_interfsel); - phy_power_on(musb->phy); } return 0; -- cgit v1.2.3 From 3c4653c1f62ea5f1706084090a5a3bcf3402dc8f Mon Sep 17 00:00:00 2001 From: Ajay Kumar Gupta Date: Tue, 4 Feb 2014 15:28:06 +0200 Subject: usb: musb: host: Fix SuperSpeed hub enumeration Disables PING on status phase of control transfer. PING token is not mandatory in status phase of control transfer and so some high speed USB devices don't support it. If such devices are connected to MUSB then they would not respond to PING token causing delayed or failed enumeration. [Roger Q] Fixes enumeration issues with some Super-Speed USB hubs e.g. Dlink DUB-1340 Signed-off-by: Ajay Kumar Gupta Signed-off-by: Roger Quadros Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_host.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index ed455724017b..abb38c3833ef 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -1183,6 +1183,9 @@ irqreturn_t musb_h_ep0_irq(struct musb *musb) csr = MUSB_CSR0_H_STATUSPKT | MUSB_CSR0_TXPKTRDY; + /* disable ping token in status phase */ + csr |= MUSB_CSR0_H_DIS_PING; + /* flag status stage */ musb->ep0_stage = MUSB_EP0_STATUS; -- cgit v1.2.3 From 33f8d75f5771993ef16ed6bd56d7210f54226203 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Tue, 4 Feb 2014 15:29:33 +0200 Subject: usb: musb: core: Fix remote-wakeup resume During resume don't touch SUSPENDM/RESUME bits of POWER register while restoring controller context. These bits might be changed by the controller during resume operation and so will be different than what they were during suspend. e.g. SUSPENDM bit is set by software during USB global suspend but automatically cleared by the controller during remote wakeup or during resume. Setting this bit back while restoring context causes undesired behaviour. i.e. Babble interrupt is generated and USB is broken. Signed-off-by: Roger Quadros Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_core.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index fc192ad9cc6a..a501542dfeb5 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -2157,11 +2157,19 @@ static void musb_restore_context(struct musb *musb) void __iomem *musb_base = musb->mregs; void __iomem *ep_target_regs; void __iomem *epio; + u8 power; musb_writew(musb_base, MUSB_FRAME, musb->context.frame); musb_writeb(musb_base, MUSB_TESTMODE, musb->context.testmode); musb_write_ulpi_buscontrol(musb->mregs, musb->context.busctl); - musb_writeb(musb_base, MUSB_POWER, musb->context.power); + + /* Don't affect SUSPENDM/RESUME bits in POWER reg */ + power = musb_readb(musb_base, MUSB_POWER); + power &= MUSB_POWER_SUSPENDM | MUSB_POWER_RESUME; + musb->context.power &= ~(MUSB_POWER_SUSPENDM | MUSB_POWER_RESUME); + power |= musb->context.power; + musb_writeb(musb_base, MUSB_POWER, power); + musb_writew(musb_base, MUSB_INTRTXE, musb->intrtxe); musb_writew(musb_base, MUSB_INTRRXE, musb->intrrxe); musb_writeb(musb_base, MUSB_INTRUSBE, musb->context.intrusbe); -- cgit v1.2.3 From d246c9d55a90722fac9e7284201088eb62adcfc3 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 3 Feb 2014 13:59:38 +0530 Subject: usb: gadget: s3c2410_udc: Fix build error MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Pass value instead of address as expected by 'usb_ep_set_maxpacket_limit'. Fixes the following compilation error introduced by commit e117e742d310 ("usb: gadget: add "maxpacket_limit" field to struct usb_ep"): drivers/usb/gadget/s3c2410_udc.c: In function ‘s3c2410_udc_reinit’: drivers/usb/gadget/s3c2410_udc.c:1632:3: error: cannot take address of bit-field ‘maxpacket’ usb_ep_set_maxpacket_limit(&ep->ep, &ep->ep.maxpacket); Signed-off-by: Sachin Kamat Reviewed-by: Robert Baldyga Signed-off-by: Felipe Balbi --- drivers/usb/gadget/s3c2410_udc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c index f04b2c3154de..dd9678f85c58 100644 --- a/drivers/usb/gadget/s3c2410_udc.c +++ b/drivers/usb/gadget/s3c2410_udc.c @@ -1629,7 +1629,7 @@ static void s3c2410_udc_reinit(struct s3c2410_udc *dev) ep->ep.desc = NULL; ep->halted = 0; INIT_LIST_HEAD(&ep->queue); - usb_ep_set_maxpacket_limit(&ep->ep, &ep->ep.maxpacket); + usb_ep_set_maxpacket_limit(&ep->ep, ep->ep.maxpacket); } } -- cgit v1.2.3 From 30d361bf0f81ece8de42c5e0a4e560270ad72b65 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 15 Jan 2014 14:09:49 +0100 Subject: usb: musb: do not sleep in atomic context musb_port_reset() is called from musb_hub_control() which in turn holds a spinlock, so musb_port_reset() is not allowed to call msleep(). With the asynchronous work helpers in place, this is fortunately easy to fix by rescheduling the reset deassertion function to after the time when the wait period is finished. Note, however, that the MUSB_POWER_RESUME bit is only set on AM33xx processors under rare conditions such as when to another driver reporting an error during suspend. Hence, this didn't hit me yet in normal operation. Signed-off-by: Daniel Mack Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_core.c | 2 ++ drivers/usb/musb/musb_virthub.c | 20 +++++++++++++++----- 2 files changed, 17 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index a501542dfeb5..b49a5945c90c 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -477,6 +477,8 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, musb->port1_status |= (USB_PORT_STAT_C_SUSPEND << 16) | MUSB_PORT_STAT_RESUME; + musb->rh_timer = jiffies + + msecs_to_jiffies(20); schedule_delayed_work( &musb->finish_resume_work, 20); diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c index eb634433ef09..32f49e1efa9c 100644 --- a/drivers/usb/musb/musb_virthub.c +++ b/drivers/usb/musb/musb_virthub.c @@ -158,7 +158,6 @@ void musb_port_reset(struct musb *musb, bool do_reset) */ power = musb_readb(mbase, MUSB_POWER); if (do_reset) { - /* * If RESUME is set, we must make sure it stays minimum 20 ms. * Then we must clear RESUME and wait a bit to let musb start @@ -167,11 +166,22 @@ void musb_port_reset(struct musb *musb, bool do_reset) * detected". */ if (power & MUSB_POWER_RESUME) { - while (time_before(jiffies, musb->rh_timer)) - msleep(1); + long remain = (unsigned long) musb->rh_timer - jiffies; + + if (musb->rh_timer > 0 && remain > 0) { + /* take into account the minimum delay after resume */ + schedule_delayed_work( + &musb->deassert_reset_work, + jiffies_to_msecs(remain)); + return; + } + musb_writeb(mbase, MUSB_POWER, - power & ~MUSB_POWER_RESUME); - msleep(1); + power & ~MUSB_POWER_RESUME); + + /* Give the core 1 ms to clear MUSB_POWER_RESUME */ + schedule_delayed_work(&musb->deassert_reset_work, 1); + return; } power &= 0xf0; -- cgit v1.2.3 From 2d1f7af3d60dd09794e0738a915d272c6c27abc5 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Tue, 14 Jan 2014 15:36:29 -0800 Subject: usb: gadget: bcm63xx_udc: fix build failure on DMA channel code Commit 3dc6475 ("bcm63xx_enet: add support Broadcom BCM6345 Ethernet") changed the ENETDMA[CS] macros such that they are no longer macros, but actual register offset definitions. The bcm63xx_udc driver was not updated, and as a result, causes the following build error to pop up: CC drivers/usb/gadget/u_ether.o drivers/usb/gadget/bcm63xx_udc.c: In function 'iudma_write': drivers/usb/gadget/bcm63xx_udc.c:642:24: error: called object '0' is not a function drivers/usb/gadget/bcm63xx_udc.c: In function 'iudma_reset_channel': drivers/usb/gadget/bcm63xx_udc.c:698:46: error: called object '0' is not a function drivers/usb/gadget/bcm63xx_udc.c:700:49: error: called object '0' is not a function Fix this by updating usb_dmac_{read,write}l and usb_dmas_{read,write}l to take an extra channel argument, and use the channel width (ENETDMA_CHAN_WIDTH) to offset the register we want to access, hence doing again what the macro implicitely did for us. Cc: Kevin Cernekee Cc: Jonas Gorski Cc: Signed-off-by: Florian Fainelli Signed-off-by: Felipe Balbi --- drivers/usb/gadget/bcm63xx_udc.c | 58 ++++++++++++++++++++++------------------ 1 file changed, 32 insertions(+), 26 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/bcm63xx_udc.c b/drivers/usb/gadget/bcm63xx_udc.c index 888fbb43b338..e969eb809a85 100644 --- a/drivers/usb/gadget/bcm63xx_udc.c +++ b/drivers/usb/gadget/bcm63xx_udc.c @@ -360,24 +360,30 @@ static inline void usb_dma_writel(struct bcm63xx_udc *udc, u32 val, u32 off) bcm_writel(val, udc->iudma_regs + off); } -static inline u32 usb_dmac_readl(struct bcm63xx_udc *udc, u32 off) +static inline u32 usb_dmac_readl(struct bcm63xx_udc *udc, u32 off, int chan) { - return bcm_readl(udc->iudma_regs + IUDMA_DMAC_OFFSET + off); + return bcm_readl(udc->iudma_regs + IUDMA_DMAC_OFFSET + off + + (ENETDMA_CHAN_WIDTH * chan)); } -static inline void usb_dmac_writel(struct bcm63xx_udc *udc, u32 val, u32 off) +static inline void usb_dmac_writel(struct bcm63xx_udc *udc, u32 val, u32 off, + int chan) { - bcm_writel(val, udc->iudma_regs + IUDMA_DMAC_OFFSET + off); + bcm_writel(val, udc->iudma_regs + IUDMA_DMAC_OFFSET + off + + (ENETDMA_CHAN_WIDTH * chan)); } -static inline u32 usb_dmas_readl(struct bcm63xx_udc *udc, u32 off) +static inline u32 usb_dmas_readl(struct bcm63xx_udc *udc, u32 off, int chan) { - return bcm_readl(udc->iudma_regs + IUDMA_DMAS_OFFSET + off); + return bcm_readl(udc->iudma_regs + IUDMA_DMAS_OFFSET + off + + (ENETDMA_CHAN_WIDTH * chan)); } -static inline void usb_dmas_writel(struct bcm63xx_udc *udc, u32 val, u32 off) +static inline void usb_dmas_writel(struct bcm63xx_udc *udc, u32 val, u32 off, + int chan) { - bcm_writel(val, udc->iudma_regs + IUDMA_DMAS_OFFSET + off); + bcm_writel(val, udc->iudma_regs + IUDMA_DMAS_OFFSET + off + + (ENETDMA_CHAN_WIDTH * chan)); } static inline void set_clocks(struct bcm63xx_udc *udc, bool is_enabled) @@ -638,7 +644,7 @@ static void iudma_write(struct bcm63xx_udc *udc, struct iudma_ch *iudma, } while (!last_bd); usb_dmac_writel(udc, ENETDMAC_CHANCFG_EN_MASK, - ENETDMAC_CHANCFG_REG(iudma->ch_idx)); + ENETDMAC_CHANCFG_REG, iudma->ch_idx); } /** @@ -694,9 +700,9 @@ static void iudma_reset_channel(struct bcm63xx_udc *udc, struct iudma_ch *iudma) bcm63xx_fifo_reset_ep(udc, max(0, iudma->ep_num)); /* stop DMA, then wait for the hardware to wrap up */ - usb_dmac_writel(udc, 0, ENETDMAC_CHANCFG_REG(ch_idx)); + usb_dmac_writel(udc, 0, ENETDMAC_CHANCFG_REG, ch_idx); - while (usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG(ch_idx)) & + while (usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG, ch_idx) & ENETDMAC_CHANCFG_EN_MASK) { udelay(1); @@ -713,10 +719,10 @@ static void iudma_reset_channel(struct bcm63xx_udc *udc, struct iudma_ch *iudma) dev_warn(udc->dev, "forcibly halting IUDMA channel %d\n", ch_idx); usb_dmac_writel(udc, ENETDMAC_CHANCFG_BUFHALT_MASK, - ENETDMAC_CHANCFG_REG(ch_idx)); + ENETDMAC_CHANCFG_REG, ch_idx); } } - usb_dmac_writel(udc, ~0, ENETDMAC_IR_REG(ch_idx)); + usb_dmac_writel(udc, ~0, ENETDMAC_IR_REG, ch_idx); /* don't leave "live" HW-owned entries for the next guy to step on */ for (d = iudma->bd_ring; d <= iudma->end_bd; d++) @@ -728,11 +734,11 @@ static void iudma_reset_channel(struct bcm63xx_udc *udc, struct iudma_ch *iudma) /* set up IRQs, UBUS burst size, and BD base for this channel */ usb_dmac_writel(udc, ENETDMAC_IR_BUFDONE_MASK, - ENETDMAC_IRMASK_REG(ch_idx)); - usb_dmac_writel(udc, 8, ENETDMAC_MAXBURST_REG(ch_idx)); + ENETDMAC_IRMASK_REG, ch_idx); + usb_dmac_writel(udc, 8, ENETDMAC_MAXBURST_REG, ch_idx); - usb_dmas_writel(udc, iudma->bd_ring_dma, ENETDMAS_RSTART_REG(ch_idx)); - usb_dmas_writel(udc, 0, ENETDMAS_SRAM2_REG(ch_idx)); + usb_dmas_writel(udc, iudma->bd_ring_dma, ENETDMAS_RSTART_REG, ch_idx); + usb_dmas_writel(udc, 0, ENETDMAS_SRAM2_REG, ch_idx); } /** @@ -2035,7 +2041,7 @@ static irqreturn_t bcm63xx_udc_data_isr(int irq, void *dev_id) spin_lock(&udc->lock); usb_dmac_writel(udc, ENETDMAC_IR_BUFDONE_MASK, - ENETDMAC_IR_REG(iudma->ch_idx)); + ENETDMAC_IR_REG, iudma->ch_idx); bep = iudma->bep; rc = iudma_read(udc, iudma); @@ -2175,18 +2181,18 @@ static int bcm63xx_iudma_dbg_show(struct seq_file *s, void *p) seq_printf(s, " [ep%d]:\n", max_t(int, iudma_defaults[ch_idx].ep_num, 0)); seq_printf(s, " cfg: %08x; irqstat: %08x; irqmask: %08x; maxburst: %08x\n", - usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG(ch_idx)), - usb_dmac_readl(udc, ENETDMAC_IR_REG(ch_idx)), - usb_dmac_readl(udc, ENETDMAC_IRMASK_REG(ch_idx)), - usb_dmac_readl(udc, ENETDMAC_MAXBURST_REG(ch_idx))); + usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG, ch_idx), + usb_dmac_readl(udc, ENETDMAC_IR_REG, ch_idx), + usb_dmac_readl(udc, ENETDMAC_IRMASK_REG, ch_idx), + usb_dmac_readl(udc, ENETDMAC_MAXBURST_REG, ch_idx)); - sram2 = usb_dmas_readl(udc, ENETDMAS_SRAM2_REG(ch_idx)); - sram3 = usb_dmas_readl(udc, ENETDMAS_SRAM3_REG(ch_idx)); + sram2 = usb_dmas_readl(udc, ENETDMAS_SRAM2_REG, ch_idx); + sram3 = usb_dmas_readl(udc, ENETDMAS_SRAM3_REG, ch_idx); seq_printf(s, " base: %08x; index: %04x_%04x; desc: %04x_%04x %08x\n", - usb_dmas_readl(udc, ENETDMAS_RSTART_REG(ch_idx)), + usb_dmas_readl(udc, ENETDMAS_RSTART_REG, ch_idx), sram2 >> 16, sram2 & 0xffff, sram3 >> 16, sram3 & 0xffff, - usb_dmas_readl(udc, ENETDMAS_SRAM4_REG(ch_idx))); + usb_dmas_readl(udc, ENETDMAS_SRAM4_REG, ch_idx)); seq_printf(s, " desc: %d/%d used", iudma->n_bds_used, iudma->n_bds); -- cgit v1.2.3 From 8679059e360543b7afecd228ada6566da9f304a4 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Fri, 3 Jan 2014 16:45:13 +0800 Subject: usb: gadget: printer: using gadget_is_otg to check otg support at runtime We need to use gadget_is_otg to check if the gadget is really otg support at runtime, other composite gadget drivers have already followed this method. Signed-off-by: Peter Chen Signed-off-by: Felipe Balbi --- drivers/usb/gadget/printer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c index bf7a56b6d48a..69b76efd11e9 100644 --- a/drivers/usb/gadget/printer.c +++ b/drivers/usb/gadget/printer.c @@ -1157,7 +1157,7 @@ static int __init printer_bind_config(struct usb_configuration *c) usb_gadget_set_selfpowered(gadget); - if (gadget->is_otg) { + if (gadget_is_otg(gadget)) { otg_descriptor.bmAttributes |= USB_OTG_HNP; printer_cfg_driver.descriptors = otg_desc; printer_cfg_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP; -- cgit v1.2.3 From f0f42204d0cc04a63ac61fdaa3b6a269ea0dc08b Mon Sep 17 00:00:00 2001 From: Andrzej Pietrasiewicz Date: Mon, 20 Jan 2014 08:33:50 +0100 Subject: usb: gadget: fix NULL pointer dereference Fix possible NULL pointer dereference introduced in commit 219580e (usb: f_fs: check quirk to pad epout buf size when not aligned to maxpacketsize) In cases we do wait with: wait_event_interruptible(epfile->wait, (ep = epfile->ep)); for endpoint to be enabled, functionfs_bind() has not been called yet and epfile->ffs->gadget is still NULL and the automatic variable 'gadget' has been initialized with NULL at the point of its definition. Later on it is used as a parameter to: usb_ep_align_maybe(gadget, ep->ep, len) which in turn dereferences it. This patch fixes it by moving the actual assignment to the local 'gadget' variable after the potential waiting has completed. Signed-off-by: Andrzej Pietrasiewicz Acked-by: Michal Nazarewicz Signed-off-by: Felipe Balbi --- drivers/usb/gadget/f_fs.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c index 306a2b52125c..2b4334394076 100644 --- a/drivers/usb/gadget/f_fs.c +++ b/drivers/usb/gadget/f_fs.c @@ -585,7 +585,6 @@ static ssize_t ffs_epfile_io(struct file *file, char __user *buf, size_t len, int read) { struct ffs_epfile *epfile = file->private_data; - struct usb_gadget *gadget = epfile->ffs->gadget; struct ffs_ep *ep; char *data = NULL; ssize_t ret, data_len; @@ -621,6 +620,12 @@ static ssize_t ffs_epfile_io(struct file *file, /* Allocate & copy */ if (!halt) { + /* + * if we _do_ wait above, the epfile->ffs->gadget might be NULL + * before the waiting completes, so do not assign to 'gadget' earlier + */ + struct usb_gadget *gadget = epfile->ffs->gadget; + /* * Controller may require buffer size to be aligned to * maxpacketsize of an out endpoint. -- cgit v1.2.3 From e7d613d1db6f968514ccd7f0cbebba031e6394d2 Mon Sep 17 00:00:00 2001 From: Josh Cartwright Date: Tue, 18 Feb 2014 10:36:29 -0600 Subject: usb: phy: msm: fix compilation errors when !CONFIG_PM_SLEEP Both the PM_RUNTIME and PM_SLEEP callbacks call into the common msm_otg_{suspend,resume} routines, however these routines are only being built when CONFIG_PM_SLEEP. In addition, msm_otg_{suspend,resume} also depends on msm_hsusb_config_vddcx(), which is only built when CONFIG_PM_SLEEP. Fix the CONFIG_PM_RUNTIME, !CONFIG_PM_SLEEP case by changing the preprocessor conditional, and moving msm_hsusb_config_vddcx(). While we're here, eliminate the CONFIG_PM conditional for setting up the dev_pm_ops. This address the following errors Russell King has hit doing randconfig builds: drivers/usb/phy/phy-msm-usb.c: In function 'msm_otg_runtime_suspend': drivers/usb/phy/phy-msm-usb.c:1691:2: error: implicit declaration of function 'msm_otg_suspend' drivers/usb/phy/phy-msm-usb.c: In function 'msm_otg_runtime_resume': drivers/usb/phy/phy-msm-usb.c:1699:2: error: implicit declaration of function 'msm_otg_resume' Cc: Ivan T. Ivanov Reported-by: Russell King Signed-off-by: Josh Cartwright Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-msm-usb.c | 57 ++++++++++++++++++++----------------------- 1 file changed, 26 insertions(+), 31 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index 8546c8dccd51..d204f745ed05 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -159,32 +159,6 @@ put_3p3: return rc; } -#ifdef CONFIG_PM_SLEEP -#define USB_PHY_SUSP_DIG_VOL 500000 -static int msm_hsusb_config_vddcx(int high) -{ - int max_vol = USB_PHY_VDD_DIG_VOL_MAX; - int min_vol; - int ret; - - if (high) - min_vol = USB_PHY_VDD_DIG_VOL_MIN; - else - min_vol = USB_PHY_SUSP_DIG_VOL; - - ret = regulator_set_voltage(hsusb_vddcx, min_vol, max_vol); - if (ret) { - pr_err("%s: unable to set the voltage for regulator " - "HSUSB_VDDCX\n", __func__); - return ret; - } - - pr_debug("%s: min_vol:%d max_vol:%d\n", __func__, min_vol, max_vol); - - return ret; -} -#endif - static int msm_hsusb_ldo_set_mode(int on) { int ret = 0; @@ -440,7 +414,32 @@ static int msm_otg_reset(struct usb_phy *phy) #define PHY_SUSPEND_TIMEOUT_USEC (500 * 1000) #define PHY_RESUME_TIMEOUT_USEC (100 * 1000) -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_PM + +#define USB_PHY_SUSP_DIG_VOL 500000 +static int msm_hsusb_config_vddcx(int high) +{ + int max_vol = USB_PHY_VDD_DIG_VOL_MAX; + int min_vol; + int ret; + + if (high) + min_vol = USB_PHY_VDD_DIG_VOL_MIN; + else + min_vol = USB_PHY_SUSP_DIG_VOL; + + ret = regulator_set_voltage(hsusb_vddcx, min_vol, max_vol); + if (ret) { + pr_err("%s: unable to set the voltage for regulator " + "HSUSB_VDDCX\n", __func__); + return ret; + } + + pr_debug("%s: min_vol:%d max_vol:%d\n", __func__, min_vol, max_vol); + + return ret; +} + static int msm_otg_suspend(struct msm_otg *motg) { struct usb_phy *phy = &motg->phy; @@ -1733,22 +1732,18 @@ static int msm_otg_pm_resume(struct device *dev) } #endif -#ifdef CONFIG_PM static const struct dev_pm_ops msm_otg_dev_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(msm_otg_pm_suspend, msm_otg_pm_resume) SET_RUNTIME_PM_OPS(msm_otg_runtime_suspend, msm_otg_runtime_resume, msm_otg_runtime_idle) }; -#endif static struct platform_driver msm_otg_driver = { .remove = msm_otg_remove, .driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, -#ifdef CONFIG_PM .pm = &msm_otg_dev_pm_ops, -#endif }, }; -- cgit v1.2.3 From 9ccfaf74e766d49a64f86943f98d0a82996d4dec Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 5 Feb 2014 15:34:18 +0100 Subject: usb: musb: correct use of schedule_delayed_work() schedule_delayed_work() takes the delay in jiffies, not msecs. This bug slipped in with the recent reset logic cleanup (8ed1fb790ea: "usb: musb: finish suspend/reset work independently from musb_hub_control()"). Signed-off-by: Daniel Mack Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_core.c | 3 ++- drivers/usb/musb/musb_virthub.c | 12 +++++++----- 2 files changed, 9 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index b49a5945c90c..239ad0b1ceb6 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -480,7 +480,8 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, musb->rh_timer = jiffies + msecs_to_jiffies(20); schedule_delayed_work( - &musb->finish_resume_work, 20); + &musb->finish_resume_work, + msecs_to_jiffies(20)); musb->xceiv->state = OTG_STATE_A_HOST; musb->is_active = 1; diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c index 32f49e1efa9c..e2d2d8c9891b 100644 --- a/drivers/usb/musb/musb_virthub.c +++ b/drivers/usb/musb/musb_virthub.c @@ -135,7 +135,8 @@ void musb_port_suspend(struct musb *musb, bool do_suspend) /* later, GetPortStatus will stop RESUME signaling */ musb->port1_status |= MUSB_PORT_STAT_RESUME; - schedule_delayed_work(&musb->finish_resume_work, 20); + schedule_delayed_work(&musb->finish_resume_work, + msecs_to_jiffies(20)); } } @@ -171,8 +172,7 @@ void musb_port_reset(struct musb *musb, bool do_reset) if (musb->rh_timer > 0 && remain > 0) { /* take into account the minimum delay after resume */ schedule_delayed_work( - &musb->deassert_reset_work, - jiffies_to_msecs(remain)); + &musb->deassert_reset_work, remain); return; } @@ -180,7 +180,8 @@ void musb_port_reset(struct musb *musb, bool do_reset) power & ~MUSB_POWER_RESUME); /* Give the core 1 ms to clear MUSB_POWER_RESUME */ - schedule_delayed_work(&musb->deassert_reset_work, 1); + schedule_delayed_work(&musb->deassert_reset_work, + msecs_to_jiffies(1)); return; } @@ -190,7 +191,8 @@ void musb_port_reset(struct musb *musb, bool do_reset) musb->port1_status |= USB_PORT_STAT_RESET; musb->port1_status &= ~USB_PORT_STAT_ENABLE; - schedule_delayed_work(&musb->deassert_reset_work, 50); + schedule_delayed_work(&musb->deassert_reset_work, + msecs_to_jiffies(50)); } else { dev_dbg(musb->controller, "root port reset stopped\n"); musb_writeb(mbase, MUSB_POWER, -- cgit v1.2.3