From 019ccc73201e933fe7d8119c90a812d347e325f9 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 25 Feb 2010 10:39:20 -0800 Subject: USB: qcaux: driver for auxiliary serial ports on Qualcomm devices qcaux: add driver for QCDM-capable ports on various devices Many Qualcomm-based devices provide a CDC-ACM port which accepts normal AT commands and PPP connections. But they only provide one which makes status or signal strength requests impossible while PPP is active. They also provide secondary USB interfaces that talk the Qualcomm Diagnostic Monitor (QCDM) protocol which can be used for status and strength. Make those QCDM ports accessible. Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/Kconfig | 11 ++++++ drivers/usb/serial/Makefile | 1 + drivers/usb/serial/qcaux.c | 96 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 108 insertions(+) create mode 100644 drivers/usb/serial/qcaux.c (limited to 'drivers/usb/serial') diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index d9f289ca2bda..c78b255e3f83 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -472,6 +472,17 @@ config USB_SERIAL_OTI6858 To compile this driver as a module, choose M here: the module will be called oti6858. +config USB_SERIAL_QCAUX + tristate "USB Qualcomm Auxiliary Serial Port Driver" + ---help--- + Say Y here if you want to use the auxiliary serial ports provided + by many modems based on Qualcomm chipsets. These ports often use + a proprietary protocol called DM and cannot be used for AT- or + PPP-based communication. + + To compile this driver as a module, choose M here: the + module will be called moto_modem. If unsure, choose N. + config USB_SERIAL_QUALCOMM tristate "USB Qualcomm Serial modem" help diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile index 108c7d8f0c71..83c9e431a568 100644 --- a/drivers/usb/serial/Makefile +++ b/drivers/usb/serial/Makefile @@ -45,6 +45,7 @@ obj-$(CONFIG_USB_SERIAL_OPTICON) += opticon.o obj-$(CONFIG_USB_SERIAL_OPTION) += option.o obj-$(CONFIG_USB_SERIAL_OTI6858) += oti6858.o obj-$(CONFIG_USB_SERIAL_PL2303) += pl2303.o +obj-$(CONFIG_USB_SERIAL_QCAUX) += qcaux.o obj-$(CONFIG_USB_SERIAL_QUALCOMM) += qcserial.o obj-$(CONFIG_USB_SERIAL_SAFE) += safe_serial.o obj-$(CONFIG_USB_SERIAL_SIEMENS_MPI) += siemens_mpi.o diff --git a/drivers/usb/serial/qcaux.c b/drivers/usb/serial/qcaux.c new file mode 100644 index 000000000000..0b9362061713 --- /dev/null +++ b/drivers/usb/serial/qcaux.c @@ -0,0 +1,96 @@ +/* + * Qualcomm USB Auxiliary Serial Port driver + * + * Copyright (C) 2008 Greg Kroah-Hartman + * Copyright (C) 2010 Dan Williams + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Devices listed here usually provide a CDC ACM port on which normal modem + * AT commands and PPP can be used. But when that port is in-use by PPP it + * cannot be used simultaneously for status or signal strength. Instead, the + * ports here can be queried for that information using the Qualcomm DM + * protocol. + */ + +#include +#include +#include +#include +#include +#include + +/* NOTE: for now, only use this driver for devices that provide a CDC-ACM port + * for normal AT commands, but also provide secondary USB interfaces for the + * QCDM-capable ports. Devices that do not provide a CDC-ACM port should + * probably be driven by option.ko. + */ + +/* UTStarcom/Pantech/Curitel devices */ +#define UTSTARCOM_VENDOR_ID 0x106c +#define UTSTARCOM_PRODUCT_PC5740 0x3701 +#define UTSTARCOM_PRODUCT_PC5750 0x3702 /* aka Pantech PX-500 */ +#define UTSTARCOM_PRODUCT_UM150 0x3711 +#define UTSTARCOM_PRODUCT_UM175_V1 0x3712 +#define UTSTARCOM_PRODUCT_UM175_V2 0x3714 +#define UTSTARCOM_PRODUCT_UM175_ALLTEL 0x3715 + +/* CMOTECH devices */ +#define CMOTECH_VENDOR_ID 0x16d8 +#define CMOTECH_PRODUCT_CDU550 0x5553 +#define CMOTECH_PRODUCT_CDX650 0x6512 + +static struct usb_device_id id_table[] = { + { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_PC5740, 0xff, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_PC5750, 0xff, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_UM150, 0xff, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_UM175_V1, 0xff, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_UM175_V2, 0xff, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_UM175_ALLTEL, 0xff, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CDU550, 0xff, 0xff, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CDX650, 0xff, 0xff, 0x00) }, + { }, +}; +MODULE_DEVICE_TABLE(usb, id_table); + +static struct usb_driver qcaux_driver = { + .name = "qcaux", + .probe = usb_serial_probe, + .disconnect = usb_serial_disconnect, + .id_table = id_table, + .no_dynamic_id = 1, +}; + +static struct usb_serial_driver qcaux_device = { + .driver = { + .owner = THIS_MODULE, + .name = "qcaux", + }, + .id_table = id_table, + .num_ports = 1, +}; + +static int __init qcaux_init(void) +{ + int retval; + + retval = usb_serial_register(&qcaux_device); + if (retval) + return retval; + retval = usb_register(&qcaux_driver); + if (retval) + usb_serial_deregister(&qcaux_device); + return retval; +} + +static void __exit qcaux_exit(void) +{ + usb_deregister(&qcaux_driver); + usb_serial_deregister(&qcaux_device); +} + +module_init(qcaux_init); +module_exit(qcaux_exit); +MODULE_LICENSE("GPL"); -- cgit v1.2.3