From 71a157e8edca55198e808f8561dd49017a54ee34 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Mon, 1 Feb 2010 21:34:14 -0700 Subject: of: add 'of_' prefix to machine_is_compatible() machine is compatible is an OF-specific call. It should have the of_ prefix to protect the global namespace. Signed-off-by: Grant Likely Acked-by: Michal Simek --- drivers/serial/pmac_zilog.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c index 683e66f18e8c..3e2ae4807ae2 100644 --- a/drivers/serial/pmac_zilog.c +++ b/drivers/serial/pmac_zilog.c @@ -2031,9 +2031,9 @@ static int __init pmz_console_setup(struct console *co, char *options) /* * XServe's default to 57600 bps */ - if (machine_is_compatible("RackMac1,1") - || machine_is_compatible("RackMac1,2") - || machine_is_compatible("MacRISC4")) + if (of_machine_is_compatible("RackMac1,1") + || of_machine_is_compatible("RackMac1,2") + || of_machine_is_compatible("MacRISC4")) baud = 57600; /* -- cgit v1.2.3 From 6acc6833510db8f72b5ef343296d97480555fda9 Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Tue, 16 Feb 2010 22:30:03 -0700 Subject: serial: mpc52xx_uart: re-enable mpc5121 PSC UART support Currently the support for MPC5121 PSC UART in the mpc52xx_uart driver is broken (only console pre-initialized by the bootloader works). Re-enable it now by providing MPC5121 specific ops for PSCx clock activation, FIFO controller init/uninit and MPC5121 PSC FIFO shared interrupt handling functions. Signed-off-by: John Rigby Signed-off-by: Anatolij Gustschin Acked-by: Greg Kroah-Hartman Signed-off-by: Grant Likely --- drivers/serial/mpc52xx_uart.c | 251 +++++++++++++++++++++++++++++++++++++++--- 1 file changed, 236 insertions(+), 15 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c index 7ce9e9f567a3..3119fddaedb5 100644 --- a/drivers/serial/mpc52xx_uart.c +++ b/drivers/serial/mpc52xx_uart.c @@ -74,6 +74,7 @@ #include #include #include +#include #include #include @@ -113,6 +114,7 @@ static void mpc52xx_uart_of_enumerate(void); /* Forward declaration of the interruption handling routine */ static irqreturn_t mpc52xx_uart_int(int irq, void *dev_id); +static irqreturn_t mpc5xxx_uart_process_int(struct uart_port *port); /* Simple macro to test if a port is console or not. This one is taken @@ -145,6 +147,11 @@ struct psc_ops { void (*cw_disable_ints)(struct uart_port *port); void (*cw_restore_ints)(struct uart_port *port); unsigned long (*getuartclk)(void *p); + int (*clock)(struct uart_port *port, int enable); + int (*fifoc_init)(void); + void (*fifoc_uninit)(void); + void (*get_irq)(struct uart_port *, struct device_node *); + irqreturn_t (*handle_irq)(struct uart_port *port); }; #ifdef CONFIG_PPC_MPC52xx @@ -256,6 +263,18 @@ static unsigned long mpc52xx_getuartclk(void *p) return mpc5xxx_get_bus_frequency(p) / 2; } +static void mpc52xx_psc_get_irq(struct uart_port *port, struct device_node *np) +{ + port->irqflags = IRQF_DISABLED; + port->irq = irq_of_parse_and_map(np, 0); +} + +/* 52xx specific interrupt handler. The caller holds the port lock */ +static irqreturn_t mpc52xx_psc_handle_irq(struct uart_port *port) +{ + return mpc5xxx_uart_process_int(port); +} + static struct psc_ops mpc52xx_psc_ops = { .fifo_init = mpc52xx_psc_fifo_init, .raw_rx_rdy = mpc52xx_psc_raw_rx_rdy, @@ -273,14 +292,32 @@ static struct psc_ops mpc52xx_psc_ops = { .cw_disable_ints = mpc52xx_psc_cw_disable_ints, .cw_restore_ints = mpc52xx_psc_cw_restore_ints, .getuartclk = mpc52xx_getuartclk, + .get_irq = mpc52xx_psc_get_irq, + .handle_irq = mpc52xx_psc_handle_irq, }; #endif /* CONFIG_MPC52xx */ #ifdef CONFIG_PPC_MPC512x #define FIFO_512x(port) ((struct mpc512x_psc_fifo __iomem *)(PSC(port)+1)) + +/* PSC FIFO Controller for mpc512x */ +struct psc_fifoc { + u32 fifoc_cmd; + u32 fifoc_int; + u32 fifoc_dma; + u32 fifoc_axe; + u32 fifoc_debug; +}; + +static struct psc_fifoc __iomem *psc_fifoc; +static unsigned int psc_fifoc_irq; + static void mpc512x_psc_fifo_init(struct uart_port *port) { + /* /32 prescaler */ + out_be16(&PSC(port)->mpc52xx_psc_clock_select, 0xdd00); + out_be32(&FIFO_512x(port)->txcmd, MPC512x_PSC_FIFO_RESET_SLICE); out_be32(&FIFO_512x(port)->txcmd, MPC512x_PSC_FIFO_ENABLE_SLICE); out_be32(&FIFO_512x(port)->txalarm, 1); @@ -393,6 +430,160 @@ static unsigned long mpc512x_getuartclk(void *p) return mpc5xxx_get_bus_frequency(p); } +#define DEFAULT_FIFO_SIZE 16 + +static unsigned int __init get_fifo_size(struct device_node *np, + char *fifo_name) +{ + const unsigned int *fp; + + fp = of_get_property(np, fifo_name, NULL); + if (fp) + return *fp; + + pr_warning("no %s property in %s node, defaulting to %d\n", + fifo_name, np->full_name, DEFAULT_FIFO_SIZE); + + return DEFAULT_FIFO_SIZE; +} + +#define FIFOC(_base) ((struct mpc512x_psc_fifo __iomem *) \ + ((u32)(_base) + sizeof(struct mpc52xx_psc))) + +/* Init PSC FIFO Controller */ +static int __init mpc512x_psc_fifoc_init(void) +{ + struct device_node *np; + void __iomem *psc; + unsigned int tx_fifo_size; + unsigned int rx_fifo_size; + int fifobase = 0; /* current fifo address in 32 bit words */ + + np = of_find_compatible_node(NULL, NULL, + "fsl,mpc5121-psc-fifo"); + if (!np) { + pr_err("%s: Can't find FIFOC node\n", __func__); + return -ENODEV; + } + + psc_fifoc = of_iomap(np, 0); + if (!psc_fifoc) { + pr_err("%s: Can't map FIFOC\n", __func__); + return -ENODEV; + } + + psc_fifoc_irq = irq_of_parse_and_map(np, 0); + of_node_put(np); + if (psc_fifoc_irq == NO_IRQ) { + pr_err("%s: Can't get FIFOC irq\n", __func__); + iounmap(psc_fifoc); + return -ENODEV; + } + + for_each_compatible_node(np, NULL, "fsl,mpc5121-psc-uart") { + tx_fifo_size = get_fifo_size(np, "fsl,tx-fifo-size"); + rx_fifo_size = get_fifo_size(np, "fsl,rx-fifo-size"); + + /* size in register is in 4 byte units */ + tx_fifo_size /= 4; + rx_fifo_size /= 4; + if (!tx_fifo_size) + tx_fifo_size = 1; + if (!rx_fifo_size) + rx_fifo_size = 1; + + psc = of_iomap(np, 0); + if (!psc) { + pr_err("%s: Can't map %s device\n", + __func__, np->full_name); + continue; + } + + /* FIFO space is 4KiB, check if requested size is available */ + if ((fifobase + tx_fifo_size + rx_fifo_size) > 0x1000) { + pr_err("%s: no fifo space available for %s\n", + __func__, np->full_name); + iounmap(psc); + /* + * chances are that another device requests less + * fifo space, so we continue. + */ + continue; + } + /* set tx and rx fifo size registers */ + out_be32(&FIFOC(psc)->txsz, (fifobase << 16) | tx_fifo_size); + fifobase += tx_fifo_size; + out_be32(&FIFOC(psc)->rxsz, (fifobase << 16) | rx_fifo_size); + fifobase += rx_fifo_size; + + /* reset and enable the slices */ + out_be32(&FIFOC(psc)->txcmd, 0x80); + out_be32(&FIFOC(psc)->txcmd, 0x01); + out_be32(&FIFOC(psc)->rxcmd, 0x80); + out_be32(&FIFOC(psc)->rxcmd, 0x01); + + iounmap(psc); + } + + return 0; +} + +static void __exit mpc512x_psc_fifoc_uninit(void) +{ + iounmap(psc_fifoc); +} + +/* 512x specific interrupt handler. The caller holds the port lock */ +static irqreturn_t mpc512x_psc_handle_irq(struct uart_port *port) +{ + unsigned long fifoc_int; + int psc_num; + + /* Read pending PSC FIFOC interrupts */ + fifoc_int = in_be32(&psc_fifoc->fifoc_int); + + /* Check if it is an interrupt for this port */ + psc_num = (port->mapbase & 0xf00) >> 8; + if (test_bit(psc_num, &fifoc_int) || + test_bit(psc_num + 16, &fifoc_int)) + return mpc5xxx_uart_process_int(port); + + return IRQ_NONE; +} + +static int mpc512x_psc_clock(struct uart_port *port, int enable) +{ + struct clk *psc_clk; + int psc_num; + char clk_name[10]; + + if (uart_console(port)) + return 0; + + psc_num = (port->mapbase & 0xf00) >> 8; + snprintf(clk_name, sizeof(clk_name), "psc%d_clk", psc_num); + psc_clk = clk_get(port->dev, clk_name); + if (IS_ERR(psc_clk)) { + dev_err(port->dev, "Failed to get PSC clock entry!\n"); + return -ENODEV; + } + + dev_dbg(port->dev, "%s %sable\n", clk_name, enable ? "en" : "dis"); + + if (enable) + clk_enable(psc_clk); + else + clk_disable(psc_clk); + + return 0; +} + +static void mpc512x_psc_get_irq(struct uart_port *port, struct device_node *np) +{ + port->irqflags = IRQF_SHARED; + port->irq = psc_fifoc_irq; +} + static struct psc_ops mpc512x_psc_ops = { .fifo_init = mpc512x_psc_fifo_init, .raw_rx_rdy = mpc512x_psc_raw_rx_rdy, @@ -410,6 +601,11 @@ static struct psc_ops mpc512x_psc_ops = { .cw_disable_ints = mpc512x_psc_cw_disable_ints, .cw_restore_ints = mpc512x_psc_cw_restore_ints, .getuartclk = mpc512x_getuartclk, + .clock = mpc512x_psc_clock, + .fifoc_init = mpc512x_psc_fifoc_init, + .fifoc_uninit = mpc512x_psc_fifoc_uninit, + .get_irq = mpc512x_psc_get_irq, + .handle_irq = mpc512x_psc_handle_irq, }; #endif @@ -519,10 +715,15 @@ mpc52xx_uart_startup(struct uart_port *port) struct mpc52xx_psc __iomem *psc = PSC(port); int ret; + if (psc_ops->clock) { + ret = psc_ops->clock(port, 1); + if (ret) + return ret; + } + /* Request IRQ */ ret = request_irq(port->irq, mpc52xx_uart_int, - IRQF_DISABLED | IRQF_SAMPLE_RANDOM, - "mpc52xx_psc_uart", port); + port->irqflags, "mpc52xx_psc_uart", port); if (ret) return ret; @@ -553,6 +754,9 @@ mpc52xx_uart_shutdown(struct uart_port *port) port->read_status_mask = 0; out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask); + if (psc_ops->clock) + psc_ops->clock(port, 0); + /* Release interrupt */ free_irq(port->irq, port); } @@ -851,15 +1055,12 @@ mpc52xx_uart_int_tx_chars(struct uart_port *port) } static irqreturn_t -mpc52xx_uart_int(int irq, void *dev_id) +mpc5xxx_uart_process_int(struct uart_port *port) { - struct uart_port *port = dev_id; unsigned long pass = ISR_PASS_LIMIT; unsigned int keepgoing; u8 status; - spin_lock(&port->lock); - /* While we have stuff to do, we continue */ do { /* If we don't find anything to do, we stop */ @@ -886,11 +1087,23 @@ mpc52xx_uart_int(int irq, void *dev_id) } while (keepgoing); - spin_unlock(&port->lock); - return IRQ_HANDLED; } +static irqreturn_t +mpc52xx_uart_int(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + irqreturn_t ret; + + spin_lock(&port->lock); + + ret = psc_ops->handle_irq(port); + + spin_unlock(&port->lock); + + return ret; +} /* ======================================================================== */ /* Console ( if applicable ) */ @@ -1152,7 +1365,7 @@ mpc52xx_uart_of_probe(struct of_device *op, const struct of_device_id *match) return -EINVAL; } - port->irq = irq_of_parse_and_map(op->node, 0); + psc_ops->get_irq(port, op->node); if (port->irq == NO_IRQ) { dev_dbg(&op->dev, "Could not get irq\n"); return -EINVAL; @@ -1163,10 +1376,8 @@ mpc52xx_uart_of_probe(struct of_device *op, const struct of_device_id *match) /* Add the port to the uart sub-system */ ret = uart_add_one_port(&mpc52xx_uart_driver, port); - if (ret) { - irq_dispose_mapping(port->irq); + if (ret) return ret; - } dev_set_drvdata(&op->dev, (void *)port); return 0; @@ -1178,10 +1389,8 @@ mpc52xx_uart_of_remove(struct of_device *op) struct uart_port *port = dev_get_drvdata(&op->dev); dev_set_drvdata(&op->dev, NULL); - if (port) { + if (port) uart_remove_one_port(&mpc52xx_uart_driver, port); - irq_dispose_mapping(port->irq); - } return 0; } @@ -1288,6 +1497,15 @@ mpc52xx_uart_init(void) mpc52xx_uart_of_enumerate(); + /* + * Map the PSC FIFO Controller and init if on MPC512x. + */ + if (psc_ops->fifoc_init) { + ret = psc_ops->fifoc_init(); + if (ret) + return ret; + } + ret = of_register_platform_driver(&mpc52xx_uart_of_driver); if (ret) { printk(KERN_ERR "%s: of_register_platform_driver failed (%i)\n", @@ -1302,6 +1520,9 @@ mpc52xx_uart_init(void) static void __exit mpc52xx_uart_exit(void) { + if (psc_ops->fifoc_uninit) + psc_ops->fifoc_uninit(); + of_unregister_platform_driver(&mpc52xx_uart_of_driver); uart_unregister_driver(&mpc52xx_uart_driver); } -- cgit v1.2.3 From a78621bb11fbad32a3ef968c65f9b93858b3341a Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Sun, 24 Jan 2010 18:20:22 +0100 Subject: pcmcia: handle error in serial_cs config calls Do not ignore the error returned by simple_config() / multi_config(). CC: linux-serial@vger.kernel.org Signed-off-by: Dominik Brodowski --- drivers/serial/serial_cs.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c index 0ee7239c5d69..8d38eabda826 100644 --- a/drivers/serial/serial_cs.c +++ b/drivers/serial/serial_cs.c @@ -695,11 +695,11 @@ static int serial_config(struct pcmcia_device * link) info->multi = info->quirk->multi; if (info->multi > 1) - multi_config(link); + i = multi_config(link); else - simple_config(link); + i = simple_config(link); - if (info->ndev == 0) + if (i || info->ndev == 0) goto failed; /* @@ -714,6 +714,7 @@ static int serial_config(struct pcmcia_device * link) return 0; failed: + dev_warn(&link->dev, "serial_cs: failed to initialize\n"); serial_remove(link); return -ENODEV; } -- cgit v1.2.3 From 3b43816f685fc6c2531f43514662f796f4601ffc Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Fri, 12 Feb 2010 06:43:11 +0100 Subject: ARM: 5933/1: amba-pl011: support hardware flow control Enable/disable automatic hardware flow control as requested by the termios. The controller does not allow us to control the RTS line when auto-RTS is enabled, so we enable auto-RTS only if the kernel has not disabled RTS. Acked-by: Linus Walleij Signed-off-by: Rabin Vincent Signed-off-by: Russell King --- drivers/serial/amba-pl011.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'drivers/serial') diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c index ef7adc8135dd..ce6c35333ff7 100644 --- a/drivers/serial/amba-pl011.c +++ b/drivers/serial/amba-pl011.c @@ -71,6 +71,7 @@ struct uart_amba_port { unsigned int im; /* interrupt mask */ unsigned int old_status; unsigned int ifls; /* vendor-specific */ + bool autorts; }; /* There is by now at least one vendor with differing details, so handle it */ @@ -308,6 +309,11 @@ static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl) TIOCMBIT(TIOCM_OUT1, UART011_CR_OUT1); TIOCMBIT(TIOCM_OUT2, UART011_CR_OUT2); TIOCMBIT(TIOCM_LOOP, UART011_CR_LBE); + + if (uap->autorts) { + /* We need to disable auto-RTS if we want to turn RTS off */ + TIOCMBIT(TIOCM_RTS, UART011_CR_RTSEN); + } #undef TIOCMBIT writew(cr, uap->port.membase + UART011_CR); @@ -437,6 +443,7 @@ static void pl011_shutdown(struct uart_port *port) /* * disable the port */ + uap->autorts = false; writew(UART01x_CR_UARTEN | UART011_CR_TXE, uap->port.membase + UART011_CR); /* @@ -456,6 +463,7 @@ static void pl011_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) { + struct uart_amba_port *uap = (struct uart_amba_port *)port; unsigned int lcr_h, old_cr; unsigned long flags; unsigned int baud, quot; @@ -532,6 +540,17 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios, old_cr = readw(port->membase + UART011_CR); writew(0, port->membase + UART011_CR); + if (termios->c_cflag & CRTSCTS) { + if (old_cr & UART011_CR_RTS) + old_cr |= UART011_CR_RTSEN; + + old_cr |= UART011_CR_CTSEN; + uap->autorts = true; + } else { + old_cr &= ~(UART011_CR_CTSEN | UART011_CR_RTSEN); + uap->autorts = false; + } + /* Set baud rate */ writew(quot & 0x3f, port->membase + UART011_FBRD); writew(quot >> 6, port->membase + UART011_IBRD); -- cgit v1.2.3 From b2b13cdfd05ec331e1be3bbdd593d66840c0b688 Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Wed, 28 Oct 2009 21:37:28 +0100 Subject: SERIAL 8250: Fixes for Alchemy UARTs. Limit the amount of address space claimed for Alchemy serial ports to 0x1000. On the Au1300, ports are only 0x1000 apart, and the registers only extend to 0x110 at most on all supported alchemy models. On the Au1300 the autodetect logic no longer works and this makes it necessary to specify the port type through platform data. Because of this the MSR quirk needs to be moved outside the autoconfig() function which will no longer be called when UPF_FIXED_TYPE is specified. Signed-off-by: Manuel Lauss Cc: Andrew Morton , Cc: linux-serial@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle --- drivers/serial/8250.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index e9b15c3746fa..a81ff7bc5fa1 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -1217,12 +1217,6 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags) } #endif -#ifdef CONFIG_SERIAL_8250_AU1X00 - /* if access method is AU, it is a 16550 with a quirk */ - if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU) - up->bugs |= UART_BUG_NOMSR; -#endif - serial_outp(up, UART_LCR, save_lcr); if (up->capabilities != uart_config[up->port.type].flags) { @@ -2428,7 +2422,7 @@ serial8250_pm(struct uart_port *port, unsigned int state, static unsigned int serial8250_port_size(struct uart_8250_port *pt) { if (pt->port.iotype == UPIO_AU) - return 0x100000; + return 0x1000; #ifdef CONFIG_ARCH_OMAP if (is_omap_port(pt)) return 0x16 << pt->port.regshift; @@ -2585,6 +2579,13 @@ static void serial8250_config_port(struct uart_port *port, int flags) if (flags & UART_CONFIG_TYPE) autoconfig(up, probeflags); + +#ifdef CONFIG_SERIAL_8250_AU1X00 + /* if access method is AU, it is a 16550 with a quirk */ + if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU) + up->bugs |= UART_BUG_NOMSR; +#endif + if (up->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ) autoconfig_irq(up); -- cgit v1.2.3 From 1f7b5fff505232521a7a770a639b63cd17636549 Mon Sep 17 00:00:00 2001 From: Finn Thain Date: Wed, 4 Nov 2009 00:40:23 +1100 Subject: pmac-zilog: cleanup Whitespace cleanups and comment typo fix. Signed-off-by: Finn Thain Acked-by: Benjamin Herrenschmidt Signed-off-by: Geert Uytterhoeven --- drivers/serial/pmac_zilog.c | 85 ++++++++++++++++++++++----------------------- drivers/serial/pmac_zilog.h | 20 +++++------ 2 files changed, 51 insertions(+), 54 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c index 3e2ae4807ae2..1c8afd98e14e 100644 --- a/drivers/serial/pmac_zilog.c +++ b/drivers/serial/pmac_zilog.c @@ -153,8 +153,8 @@ static void pmz_load_zsregs(struct uart_pmac_port *uap, u8 *regs) write_zsreg(uap, R10, regs[R10]); /* Set TX/RX controls sans the enable bits. */ - write_zsreg(uap, R3, regs[R3] & ~RxENABLE); - write_zsreg(uap, R5, regs[R5] & ~TxENABLE); + write_zsreg(uap, R3, regs[R3] & ~RxENABLE); + write_zsreg(uap, R5, regs[R5] & ~TxENABLE); /* now set R7 "prime" on ESCC */ write_zsreg(uap, R15, regs[R15] | EN85C30); @@ -205,7 +205,7 @@ static void pmz_load_zsregs(struct uart_pmac_port *uap, u8 *regs) */ static void pmz_maybe_update_regs(struct uart_pmac_port *uap) { - if (!ZS_REGS_HELD(uap)) { + if (!ZS_REGS_HELD(uap)) { if (ZS_TX_ACTIVE(uap)) { uap->flags |= PMACZILOG_FLAG_REGS_HELD; } else { @@ -281,7 +281,7 @@ static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap) spin_lock(&uap->port.lock); if (swallow) goto next_char; - } + } #endif /* CONFIG_MAGIC_SYSRQ && CONFIG_SERIAL_CORE_CONSOLE */ /* A real serial line, record the character and status. */ @@ -317,7 +317,7 @@ static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap) if (uap->port.ignore_status_mask == 0xff || (r1 & uap->port.ignore_status_mask) == 0) { - tty_insert_flip_char(tty, ch, flag); + tty_insert_flip_char(tty, ch, flag); } if (r1 & Rx_OVR) tty_insert_flip_char(tty, 0, TTY_OVERRUN); @@ -470,47 +470,47 @@ static irqreturn_t pmz_interrupt(int irq, void *dev_id) uap_a = pmz_get_port_A(uap); uap_b = uap_a->mate; - - spin_lock(&uap_a->port.lock); + + spin_lock(&uap_a->port.lock); r3 = read_zsreg(uap_a, R3); #ifdef DEBUG_HARD pmz_debug("irq, r3: %x\n", r3); #endif - /* Channel A */ + /* Channel A */ tty = NULL; - if (r3 & (CHAEXT | CHATxIP | CHARxIP)) { + if (r3 & (CHAEXT | CHATxIP | CHARxIP)) { write_zsreg(uap_a, R0, RES_H_IUS); zssync(uap_a); - if (r3 & CHAEXT) - pmz_status_handle(uap_a); + if (r3 & CHAEXT) + pmz_status_handle(uap_a); if (r3 & CHARxIP) tty = pmz_receive_chars(uap_a); - if (r3 & CHATxIP) - pmz_transmit_chars(uap_a); - rc = IRQ_HANDLED; - } - spin_unlock(&uap_a->port.lock); + if (r3 & CHATxIP) + pmz_transmit_chars(uap_a); + rc = IRQ_HANDLED; + } + spin_unlock(&uap_a->port.lock); if (tty != NULL) tty_flip_buffer_push(tty); if (uap_b->node == NULL) goto out; - spin_lock(&uap_b->port.lock); + spin_lock(&uap_b->port.lock); tty = NULL; if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) { write_zsreg(uap_b, R0, RES_H_IUS); zssync(uap_b); - if (r3 & CHBEXT) - pmz_status_handle(uap_b); - if (r3 & CHBRxIP) - tty = pmz_receive_chars(uap_b); - if (r3 & CHBTxIP) - pmz_transmit_chars(uap_b); - rc = IRQ_HANDLED; - } - spin_unlock(&uap_b->port.lock); + if (r3 & CHBEXT) + pmz_status_handle(uap_b); + if (r3 & CHBRxIP) + tty = pmz_receive_chars(uap_b); + if (r3 & CHBTxIP) + pmz_transmit_chars(uap_b); + rc = IRQ_HANDLED; + } + spin_unlock(&uap_b->port.lock); if (tty != NULL) tty_flip_buffer_push(tty); @@ -718,7 +718,7 @@ static void pmz_enable_ms(struct uart_port *port) if (ZS_IS_ASLEEP(uap)) return; - /* NOTE: Not subject to 'transmitter active' rule. */ + /* NOTE: Not subject to 'transmitter active' rule. */ write_zsreg(uap, R15, uap->curregs[R15]); } } @@ -748,7 +748,7 @@ static void pmz_break_ctl(struct uart_port *port, int break_state) if (new_reg != uap->curregs[R5]) { uap->curregs[R5] = new_reg; - /* NOTE: Not subject to 'transmitter active' rule. */ + /* NOTE: Not subject to 'transmitter active' rule. */ if (ZS_IS_ASLEEP(uap)) return; write_zsreg(uap, R5, uap->curregs[R5]); @@ -908,7 +908,6 @@ static int __pmz_startup(struct uart_pmac_port *uap) /* Remember status for DCD/CTS changes */ uap->prev_status = read_zsreg(uap, R0); - return pwr_delay; } @@ -983,7 +982,7 @@ static int pmz_startup(struct uart_port *port) if (!ZS_IS_EXTCLK(uap)) uap->curregs[R1] |= EXT_INT_ENAB; write_zsreg(uap, R1, uap->curregs[R1]); - spin_unlock_irqrestore(&port->lock, flags); + spin_unlock_irqrestore(&port->lock, flags); pmz_debug("pmz: startup() done.\n"); @@ -1003,7 +1002,7 @@ static void pmz_shutdown(struct uart_port *port) mutex_lock(&pmz_irq_mutex); /* Release interrupt handler */ - free_irq(uap->port.irq, uap); + free_irq(uap->port.irq, uap); spin_lock_irqsave(&port->lock, flags); @@ -1051,7 +1050,6 @@ static void pmz_convert_to_zs(struct uart_pmac_port *uap, unsigned int cflag, { int brg; - /* Switch to external clocking for IrDA high clock rates. That * code could be re-used for Midi interfaces with different * multipliers @@ -1223,12 +1221,12 @@ static void pmz_irda_setup(struct uart_pmac_port *uap, unsigned long *baud) uap->curregs[R5] |= DTR; write_zsreg(uap, R5, uap->curregs[R5]); zssync(uap); - mdelay(1); + mdelay(1); /* Switch SCC to 19200 */ pmz_convert_to_zs(uap, CS8, 0, 19200); pmz_load_zsregs(uap, uap->curregs); - mdelay(1); + mdelay(1); /* Write get_version command byte */ write_zsdata(uap, 1); @@ -1463,7 +1461,7 @@ static int __init pmz_init_port(struct uart_pmac_port *uap) return -ENODEV; uap->port.mapbase = r_ports.start; uap->port.membase = ioremap(uap->port.mapbase, 0x1000); - + uap->control_reg = uap->port.membase; uap->data_reg = uap->control_reg + 0x10; @@ -1590,7 +1588,7 @@ static void pmz_dispose_port(struct uart_pmac_port *uap) } /* - * Called upon match with an escc node in the devive-tree. + * Called upon match with an escc node in the device-tree. */ static int pmz_attach(struct macio_dev *mdev, const struct of_device_id *match) { @@ -1812,7 +1810,7 @@ static int __init pmz_probe(void) pmz_ports[count].node = node_a; pmz_ports[count+1].node = node_b; pmz_ports[count].port.line = count; - pmz_ports[count+1].port.line = count+1; + pmz_ports[count+1].port.line = count+1; /* * Setup the ports for real @@ -1899,23 +1897,22 @@ err_out: static struct of_device_id pmz_match[] = { { - .name = "ch-a", + .name = "ch-a", }, { - .name = "ch-b", + .name = "ch-b", }, {}, }; MODULE_DEVICE_TABLE (of, pmz_match); -static struct macio_driver pmz_driver = -{ +static struct macio_driver pmz_driver = { .name = "pmac_zilog", .match_table = pmz_match, .probe = pmz_attach, .remove = pmz_detach, .suspend = pmz_suspend, - .resume = pmz_resume, + .resume = pmz_resume, }; static int __init init_pmz(void) @@ -1952,7 +1949,7 @@ static int __init init_pmz(void) pmz_dispose_port(&pmz_ports[i]); return rc; } - + /* * Then we register the macio driver itself */ @@ -2034,7 +2031,7 @@ static int __init pmz_console_setup(struct console *co, char *options) if (of_machine_is_compatible("RackMac1,1") || of_machine_is_compatible("RackMac1,2") || of_machine_is_compatible("MacRISC4")) - baud = 57600; + baud = 57600; /* * Check whether an invalid uart number has been specified, and diff --git a/drivers/serial/pmac_zilog.h b/drivers/serial/pmac_zilog.h index f6e77f12acd5..f18c426324a4 100644 --- a/drivers/serial/pmac_zilog.h +++ b/drivers/serial/pmac_zilog.h @@ -1,7 +1,7 @@ #ifndef __PMAC_ZILOG_H__ #define __PMAC_ZILOG_H__ -#define pmz_debug(fmt,arg...) dev_dbg(&uap->dev->ofdev.dev, fmt, ## arg) +#define pmz_debug(fmt, arg...) dev_dbg(&uap->dev->ofdev.dev, fmt, ## arg) /* * At most 2 ESCCs with 2 ports each @@ -113,7 +113,7 @@ static inline void zssync(struct uart_pmac_port *port) #define BRG_TO_BPS(brg, freq) ((freq) / 2 / ((brg) + 2)) #define BPS_TO_BRG(bps, freq) ((((freq) + (bps)) / (2 * (bps))) - 2) -#define ZS_CLOCK 3686400 /* Z8530 RTxC input clock rate */ +#define ZS_CLOCK 3686400 /* Z8530 RTxC input clock rate */ /* The Zilog register set */ @@ -171,7 +171,7 @@ static inline void zssync(struct uart_pmac_port *port) /* Write Register 3 */ -#define RxENABLE 0x1 /* Rx Enable */ +#define RxENABLE 0x1 /* Rx Enable */ #define SYNC_L_INH 0x2 /* Sync Character Load Inhibit */ #define ADD_SM 0x4 /* Address Search Mode (SDLC) */ #define RxCRC_ENAB 0x8 /* Rx CRC Enable */ @@ -185,7 +185,7 @@ static inline void zssync(struct uart_pmac_port *port) /* Write Register 4 */ -#define PAR_ENAB 0x1 /* Parity Enable */ +#define PAR_ENAB 0x1 /* Parity Enable */ #define PAR_EVEN 0x2 /* Parity Even/Odd* */ #define SYNC_ENAB 0 /* Sync Modes Enable */ @@ -210,7 +210,7 @@ static inline void zssync(struct uart_pmac_port *port) #define TxCRC_ENAB 0x1 /* Tx CRC Enable */ #define RTS 0x2 /* RTS */ #define SDLC_CRC 0x4 /* SDLC/CRC-16 */ -#define TxENABLE 0x8 /* Tx Enable */ +#define TxENABLE 0x8 /* Tx Enable */ #define SND_BRK 0x10 /* Send Break */ #define Tx5 0x0 /* Tx 5 bits (or less)/character */ #define Tx7 0x20 /* Tx 7 bits/character */ @@ -372,11 +372,11 @@ static inline void zssync(struct uart_pmac_port *port) #define ZS_TX_ACTIVE(UP) ((UP)->flags & PMACZILOG_FLAG_TX_ACTIVE) #define ZS_WANTS_MODEM_STATUS(UP) ((UP)->flags & PMACZILOG_FLAG_MODEM_STATUS) #define ZS_IS_IRDA(UP) ((UP)->flags & PMACZILOG_FLAG_IS_IRDA) -#define ZS_IS_INTMODEM(UP) ((UP)->flags & PMACZILOG_FLAG_IS_INTMODEM) +#define ZS_IS_INTMODEM(UP) ((UP)->flags & PMACZILOG_FLAG_IS_INTMODEM) #define ZS_HAS_DMA(UP) ((UP)->flags & PMACZILOG_FLAG_HAS_DMA) -#define ZS_IS_ASLEEP(UP) ((UP)->flags & PMACZILOG_FLAG_IS_ASLEEP) -#define ZS_IS_OPEN(UP) ((UP)->flags & PMACZILOG_FLAG_IS_OPEN) -#define ZS_IS_IRQ_ON(UP) ((UP)->flags & PMACZILOG_FLAG_IS_IRQ_ON) -#define ZS_IS_EXTCLK(UP) ((UP)->flags & PMACZILOG_FLAG_IS_EXTCLK) +#define ZS_IS_ASLEEP(UP) ((UP)->flags & PMACZILOG_FLAG_IS_ASLEEP) +#define ZS_IS_OPEN(UP) ((UP)->flags & PMACZILOG_FLAG_IS_OPEN) +#define ZS_IS_IRQ_ON(UP) ((UP)->flags & PMACZILOG_FLAG_IS_IRQ_ON) +#define ZS_IS_EXTCLK(UP) ((UP)->flags & PMACZILOG_FLAG_IS_EXTCLK) #endif /* __PMAC_ZILOG_H__ */ -- cgit v1.2.3 From ec9cbe09899e36b5f216c3232215520dcf0320ab Mon Sep 17 00:00:00 2001 From: Finn Thain Date: Tue, 17 Nov 2009 20:04:44 +1100 Subject: pmac-zilog: add platform driver Add platform driver support to the pmac-zilog driver, for m68k macs. Place the powermac-specific code inside #ifdef CONFIG_PPC_PMAC. Signed-off-by: Finn Thain Acked-by: Benjamin Herrenschmidt Signed-off-by: Geert Uytterhoeven --- arch/m68k/configs/mac_defconfig | 5 ++ arch/m68k/configs/multi_defconfig | 5 ++ drivers/serial/Kconfig | 12 +-- drivers/serial/pmac_zilog.c | 155 +++++++++++++++++++++++++++++++++----- drivers/serial/pmac_zilog.h | 14 ++++ 5 files changed, 166 insertions(+), 25 deletions(-) (limited to 'drivers/serial') diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig index 9991b64fea57..3cbbf880a9e3 100644 --- a/arch/m68k/configs/mac_defconfig +++ b/arch/m68k/configs/mac_defconfig @@ -701,6 +701,11 @@ CONFIG_VT_HW_CONSOLE_BINDING=y # # Non-8250 serial port support # +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_PMACZILOG=y +CONFIG_SERIAL_PMACZILOG_TTYS=y +CONFIG_SERIAL_PMACZILOG_CONSOLE=y CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig index 69c43e2d8b45..8a2371933beb 100644 --- a/arch/m68k/configs/multi_defconfig +++ b/arch/m68k/configs/multi_defconfig @@ -822,6 +822,11 @@ CONFIG_A2232=y # # Non-8250 serial port support # +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_PMACZILOG=y +CONFIG_SERIAL_PMACZILOG_TTYS=y +CONFIG_SERIAL_PMACZILOG_CONSOLE=y CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 9ff47db0b2ce..888a0ce91c4b 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -1086,12 +1086,12 @@ config SERIAL_68360 default y config SERIAL_PMACZILOG - tristate "PowerMac z85c30 ESCC support" - depends on PPC_OF && PPC_PMAC + tristate "Mac or PowerMac z85c30 ESCC support" + depends on (M68K && MAC) || (PPC_OF && PPC_PMAC) select SERIAL_CORE help This driver supports the Zilog z85C30 serial ports found on - PowerMac machines. + (Power)Mac machines. Say Y or M if you want to be able to these serial ports. config SERIAL_PMACZILOG_TTYS @@ -1116,16 +1116,16 @@ config SERIAL_PMACZILOG_TTYS unable to use the 8250 module for PCMCIA or other 16C550-style UARTs. - Say N unless you need the z85c30 ports on your powermac + Say N unless you need the z85c30 ports on your (Power)Mac to appear as /dev/ttySn. config SERIAL_PMACZILOG_CONSOLE - bool "Console on PowerMac z85c30 serial port" + bool "Console on Mac or PowerMac z85c30 serial port" depends on SERIAL_PMACZILOG=y select SERIAL_CORE_CONSOLE help If you would like to be able to use the z85c30 serial port - on your PowerMac as the console, you can do so by answering + on your (Power)Mac as the console, you can do so by answering Y to this option. config SERIAL_LH7A40X diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c index 1c8afd98e14e..f020de1cdd50 100644 --- a/drivers/serial/pmac_zilog.c +++ b/drivers/serial/pmac_zilog.c @@ -63,11 +63,17 @@ #include #include #include + +#ifdef CONFIG_PPC_PMAC #include #include #include #include #include +#else +#include +#define of_machine_is_compatible(x) (0) +#endif #if defined (CONFIG_SERIAL_PMACZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) #define SUPPORT_SYSRQ @@ -83,11 +89,9 @@ static char version[] __initdata = "pmac_zilog: 0.6 (Benjamin Herrenschmidt )"; MODULE_AUTHOR("Benjamin Herrenschmidt "); -MODULE_DESCRIPTION("Driver for the PowerMac serial ports."); +MODULE_DESCRIPTION("Driver for the Mac and PowerMac serial ports."); MODULE_LICENSE("GPL"); -#define PWRDBG(fmt, arg...) printk(KERN_DEBUG fmt , ## arg) - #ifdef CONFIG_SERIAL_PMACZILOG_TTYS #define PMACZILOG_MAJOR TTY_MAJOR #define PMACZILOG_MINOR 64 @@ -341,7 +345,7 @@ static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap) uap->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK); write_zsreg(uap, R1, uap->curregs[R1]); zssync(uap); - dev_err(&uap->dev->ofdev.dev, "pmz: rx irq flood !\n"); + pmz_error("pmz: rx irq flood !\n"); return tty; } @@ -757,6 +761,8 @@ static void pmz_break_ctl(struct uart_port *port, int break_state) spin_unlock_irqrestore(&port->lock, flags); } +#ifdef CONFIG_PPC_PMAC + /* * Turn power on or off to the SCC and associated stuff * (port drivers, modem, IR port, etc.) @@ -792,6 +798,15 @@ static int pmz_set_scc_power(struct uart_pmac_port *uap, int state) return delay; } +#else + +static int pmz_set_scc_power(struct uart_pmac_port *uap, int state) +{ + return 0; +} + +#endif /* !CONFIG_PPC_PMAC */ + /* * FixZeroBug....Works around a bug in the SCC receving channel. * Inspired from Darwin code, 15 Sept. 2000 -DanM @@ -954,9 +969,9 @@ static int pmz_startup(struct uart_port *port) } pmz_get_port_A(uap)->flags |= PMACZILOG_FLAG_IS_IRQ_ON; - if (request_irq(uap->port.irq, pmz_interrupt, IRQF_SHARED, "PowerMac Zilog", uap)) { - dev_err(&uap->dev->ofdev.dev, - "Unable to register zs interrupt handler.\n"); + if (request_irq(uap->port.irq, pmz_interrupt, IRQF_SHARED, + "SCC", uap)) { + pmz_error("Unable to register zs interrupt handler.\n"); pmz_set_scc_power(uap, 0); mutex_unlock(&pmz_irq_mutex); return -ENXIO; @@ -1196,7 +1211,7 @@ static void pmz_irda_setup(struct uart_pmac_port *uap, unsigned long *baud) while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0 || (read_zsreg(uap, R1) & ALL_SNT) == 0) { if (--t <= 0) { - dev_err(&uap->dev->ofdev.dev, "transmitter didn't drain\n"); + pmz_error("transmitter didn't drain\n"); return; } udelay(10); @@ -1212,7 +1227,7 @@ static void pmz_irda_setup(struct uart_pmac_port *uap, unsigned long *baud) read_zsdata(uap); mdelay(10); if (--t <= 0) { - dev_err(&uap->dev->ofdev.dev, "receiver didn't drain\n"); + pmz_error("receiver didn't drain\n"); return; } } @@ -1233,8 +1248,7 @@ static void pmz_irda_setup(struct uart_pmac_port *uap, unsigned long *baud) t = 5000; while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0) { if (--t <= 0) { - dev_err(&uap->dev->ofdev.dev, - "irda_setup timed out on get_version byte\n"); + pmz_error("irda_setup timed out on get_version byte\n"); goto out; } udelay(10); @@ -1242,8 +1256,7 @@ static void pmz_irda_setup(struct uart_pmac_port *uap, unsigned long *baud) version = read_zsdata(uap); if (version < 4) { - dev_info(&uap->dev->ofdev.dev, "IrDA: dongle version %d not supported\n", - version); + pmz_info("IrDA: dongle version %d not supported\n", version); goto out; } @@ -1252,18 +1265,16 @@ static void pmz_irda_setup(struct uart_pmac_port *uap, unsigned long *baud) t = 5000; while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0) { if (--t <= 0) { - dev_err(&uap->dev->ofdev.dev, - "irda_setup timed out on speed mode byte\n"); + pmz_error("irda_setup timed out on speed mode byte\n"); goto out; } udelay(10); } t = read_zsdata(uap); if (t != cmdbyte) - dev_err(&uap->dev->ofdev.dev, - "irda_setup speed mode byte = %x (%x)\n", t, cmdbyte); + pmz_error("irda_setup speed mode byte = %x (%x)\n", t, cmdbyte); - dev_info(&uap->dev->ofdev.dev, "IrDA setup for %ld bps, dongle version: %d\n", + pmz_info("IrDA setup for %ld bps, dongle version: %d\n", *baud, version); (void)read_zsdata(uap); @@ -1413,7 +1424,7 @@ static void pmz_poll_put_char(struct uart_port *port, unsigned char c) write_zsdata(uap, c); } -#endif +#endif /* CONFIG_CONSOLE_POLL */ static struct uart_ops pmz_pops = { .tx_empty = pmz_tx_empty, @@ -1438,6 +1449,8 @@ static struct uart_ops pmz_pops = { #endif }; +#ifdef CONFIG_PPC_PMAC + /* * Setup one port structure after probing, HW is down at this point, * Unlike sunzilog, we don't need to pre-init the spinlock as we don't @@ -1834,6 +1847,88 @@ next: return 0; } +#else + +extern struct platform_device scc_a_pdev, scc_b_pdev; + +static int __init pmz_init_port(struct uart_pmac_port *uap) +{ + struct resource *r_ports; + int irq; + + r_ports = platform_get_resource(uap->node, IORESOURCE_MEM, 0); + irq = platform_get_irq(uap->node, 0); + if (!r_ports || !irq) + return -ENODEV; + + uap->port.mapbase = r_ports->start; + uap->port.membase = (unsigned char __iomem *) r_ports->start; + uap->port.iotype = UPIO_MEM; + uap->port.irq = irq; + uap->port.uartclk = ZS_CLOCK; + uap->port.fifosize = 1; + uap->port.ops = &pmz_pops; + uap->port.type = PORT_PMAC_ZILOG; + uap->port.flags = 0; + + uap->control_reg = uap->port.membase; + uap->data_reg = uap->control_reg + 4; + uap->port_type = 0; + + pmz_convert_to_zs(uap, CS8, 0, 9600); + + return 0; +} + +static int __init pmz_probe(void) +{ + int err; + + pmz_ports_count = 0; + + pmz_ports[0].mate = &pmz_ports[1]; + pmz_ports[0].port.line = 0; + pmz_ports[0].flags = PMACZILOG_FLAG_IS_CHANNEL_A; + pmz_ports[0].node = &scc_a_pdev; + err = pmz_init_port(&pmz_ports[0]); + if (err) + return err; + pmz_ports_count++; + + pmz_ports[1].mate = &pmz_ports[0]; + pmz_ports[1].port.line = 1; + pmz_ports[1].flags = 0; + pmz_ports[1].node = &scc_b_pdev; + err = pmz_init_port(&pmz_ports[1]); + if (err) + return err; + pmz_ports_count++; + + return 0; +} + +static void pmz_dispose_port(struct uart_pmac_port *uap) +{ + memset(uap, 0, sizeof(struct uart_pmac_port)); +} + +static int __init pmz_attach(struct platform_device *pdev) +{ + int i; + + for (i = 0; i < pmz_ports_count; i++) + if (pmz_ports[i].node == pdev) + return 0; + return -ENODEV; +} + +static int __exit pmz_detach(struct platform_device *pdev) +{ + return 0; +} + +#endif /* !CONFIG_PPC_PMAC */ + #ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE static void pmz_console_write(struct console *con, const char *s, unsigned int count); @@ -1894,6 +1989,8 @@ err_out: return rc; } +#ifdef CONFIG_PPC_PMAC + static struct of_device_id pmz_match[] = { { @@ -1915,6 +2012,18 @@ static struct macio_driver pmz_driver = { .resume = pmz_resume, }; +#else + +static struct platform_driver pmz_driver = { + .remove = __exit_p(pmz_detach), + .driver = { + .name = "scc", + .owner = THIS_MODULE, + }, +}; + +#endif /* !CONFIG_PPC_PMAC */ + static int __init init_pmz(void) { int rc, i; @@ -1953,15 +2062,23 @@ static int __init init_pmz(void) /* * Then we register the macio driver itself */ +#ifdef CONFIG_PPC_PMAC return macio_register_driver(&pmz_driver); +#else + return platform_driver_probe(&pmz_driver, pmz_attach); +#endif } static void __exit exit_pmz(void) { int i; +#ifdef CONFIG_PPC_PMAC /* Get rid of macio-driver (detach from macio) */ macio_unregister_driver(&pmz_driver); +#else + platform_driver_unregister(&pmz_driver); +#endif for (i = 0; i < pmz_ports_count; i++) { struct uart_pmac_port *uport = &pmz_ports[i]; diff --git a/drivers/serial/pmac_zilog.h b/drivers/serial/pmac_zilog.h index f18c426324a4..cbc34fbb1b20 100644 --- a/drivers/serial/pmac_zilog.h +++ b/drivers/serial/pmac_zilog.h @@ -1,7 +1,15 @@ #ifndef __PMAC_ZILOG_H__ #define __PMAC_ZILOG_H__ +#ifdef CONFIG_PPC_PMAC #define pmz_debug(fmt, arg...) dev_dbg(&uap->dev->ofdev.dev, fmt, ## arg) +#define pmz_error(fmt, arg...) dev_err(&uap->dev->ofdev.dev, fmt, ## arg) +#define pmz_info(fmt, arg...) dev_info(&uap->dev->ofdev.dev, fmt, ## arg) +#else +#define pmz_debug(fmt, arg...) dev_dbg(&uap->node->dev, fmt, ## arg) +#define pmz_error(fmt, arg...) dev_err(&uap->node->dev, fmt, ## arg) +#define pmz_info(fmt, arg...) dev_info(&uap->node->dev, fmt, ## arg) +#endif /* * At most 2 ESCCs with 2 ports each @@ -17,6 +25,7 @@ struct uart_pmac_port { struct uart_port port; struct uart_pmac_port *mate; +#ifdef CONFIG_PPC_PMAC /* macio_dev for the escc holding this port (maybe be null on * early inited port) */ @@ -25,6 +34,9 @@ struct uart_pmac_port { * of "escc" node (ie. ch-a or ch-b) */ struct device_node *node; +#else + struct platform_device *node; +#endif /* Port type as obtained from device tree (IRDA, modem, ...) */ int port_type; @@ -55,10 +67,12 @@ struct uart_pmac_port { volatile u8 __iomem *control_reg; volatile u8 __iomem *data_reg; +#ifdef CONFIG_PPC_PMAC unsigned int tx_dma_irq; unsigned int rx_dma_irq; volatile struct dbdma_regs __iomem *tx_dma_regs; volatile struct dbdma_regs __iomem *rx_dma_regs; +#endif struct ktermios termios_cache; }; -- cgit v1.2.3 From 73a19e4c0301908ce6346715fd08a74308451f5a Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 2 Mar 2010 11:39:15 +0900 Subject: serial: sh-sci: Add DMA support. Support using DMA for sending and receiving data over SCI(F) interfaces of various SH SoCs. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Paul Mundt --- drivers/serial/Kconfig | 4 + drivers/serial/sh-sci.c | 618 +++++++++++++++++++++++++++++++++++++++++---- include/linux/serial_sci.h | 6 + 3 files changed, 582 insertions(+), 46 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 888a0ce91c4b..11ebe862457b 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -1009,6 +1009,10 @@ config SERIAL_SH_SCI_CONSOLE depends on SERIAL_SH_SCI=y select SERIAL_CORE_CONSOLE +config SERIAL_SH_SCI_DMA + bool "DMA support" + depends on SERIAL_SH_SCI && SH_DMAE && EXPERIMENTAL + config SERIAL_PNX8XXX bool "Enable PNX8XXX SoCs' UART Support" depends on MIPS && (SOC_PNX8550 || SOC_PNX833X) diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 42f3333c4ad0..f3841cd8fc5d 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -48,6 +48,9 @@ #include #include #include +#include +#include +#include #ifdef CONFIG_SUPERH #include @@ -84,6 +87,27 @@ struct sci_port { struct clk *dclk; struct list_head node; + struct dma_chan *chan_tx; + struct dma_chan *chan_rx; +#ifdef CONFIG_SERIAL_SH_SCI_DMA + struct device *dma_dev; + enum sh_dmae_slave_chan_id slave_tx; + enum sh_dmae_slave_chan_id slave_rx; + struct dma_async_tx_descriptor *desc_tx; + struct dma_async_tx_descriptor *desc_rx[2]; + dma_cookie_t cookie_tx; + dma_cookie_t cookie_rx[2]; + dma_cookie_t active_rx; + struct scatterlist sg_tx; + unsigned int sg_len_tx; + struct scatterlist sg_rx[2]; + size_t buf_len_rx; + struct sh_dmae_slave param_tx; + struct sh_dmae_slave param_rx; + struct work_struct work_tx; + struct work_struct work_rx; + struct timer_list rx_timer; +#endif }; struct sh_sci_priv { @@ -269,29 +293,44 @@ static inline void sci_init_pins(struct uart_port *port, unsigned int cflag) defined(CONFIG_CPU_SUBTYPE_SH7780) || \ defined(CONFIG_CPU_SUBTYPE_SH7785) || \ defined(CONFIG_CPU_SUBTYPE_SH7786) -static inline int scif_txroom(struct uart_port *port) +static int scif_txfill(struct uart_port *port) { - return SCIF_TXROOM_MAX - (sci_in(port, SCTFDR) & 0xff); + return sci_in(port, SCTFDR) & 0xff; } -static inline int scif_rxroom(struct uart_port *port) +static int scif_txroom(struct uart_port *port) +{ + return SCIF_TXROOM_MAX - scif_txfill(port); +} + +static int scif_rxfill(struct uart_port *port) { return sci_in(port, SCRFDR) & 0xff; } #elif defined(CONFIG_CPU_SUBTYPE_SH7763) -static inline int scif_txroom(struct uart_port *port) +static int scif_txfill(struct uart_port *port) { - if ((port->mapbase == 0xffe00000) || - (port->mapbase == 0xffe08000)) { + if (port->mapbase == 0xffe00000 || + port->mapbase == 0xffe08000) /* SCIF0/1*/ - return SCIF_TXROOM_MAX - (sci_in(port, SCTFDR) & 0xff); - } else { + return sci_in(port, SCTFDR) & 0xff; + else /* SCIF2 */ - return SCIF2_TXROOM_MAX - (sci_in(port, SCFDR) >> 8); - } + return sci_in(port, SCFDR) >> 8; +} + +static int scif_txroom(struct uart_port *port) +{ + if (port->mapbase == 0xffe00000 || + port->mapbase == 0xffe08000) + /* SCIF0/1*/ + return SCIF_TXROOM_MAX - scif_txfill(port); + else + /* SCIF2 */ + return SCIF2_TXROOM_MAX - scif_txfill(port); } -static inline int scif_rxroom(struct uart_port *port) +static int scif_rxfill(struct uart_port *port) { if ((port->mapbase == 0xffe00000) || (port->mapbase == 0xffe08000)) { @@ -303,23 +342,33 @@ static inline int scif_rxroom(struct uart_port *port) } } #else -static inline int scif_txroom(struct uart_port *port) +static int scif_txfill(struct uart_port *port) { - return SCIF_TXROOM_MAX - (sci_in(port, SCFDR) >> 8); + return sci_in(port, SCFDR) >> 8; } -static inline int scif_rxroom(struct uart_port *port) +static int scif_txroom(struct uart_port *port) +{ + return SCIF_TXROOM_MAX - scif_txfill(port); +} + +static int scif_rxfill(struct uart_port *port) { return sci_in(port, SCFDR) & SCIF_RFDC_MASK; } #endif -static inline int sci_txroom(struct uart_port *port) +static int sci_txfill(struct uart_port *port) { - return (sci_in(port, SCxSR) & SCI_TDRE) != 0; + return !(sci_in(port, SCxSR) & SCI_TDRE); } -static inline int sci_rxroom(struct uart_port *port) +static int sci_txroom(struct uart_port *port) +{ + return !sci_txfill(port); +} + +static int sci_rxfill(struct uart_port *port) { return (sci_in(port, SCxSR) & SCxSR_RDxF(port)) != 0; } @@ -406,9 +455,9 @@ static inline void sci_receive_chars(struct uart_port *port) while (1) { if (port->type == PORT_SCI) - count = sci_rxroom(port); + count = sci_rxfill(port); else - count = scif_rxroom(port); + count = scif_rxfill(port); /* Don't copy more bytes than there is room for in the buffer */ count = tty_buffer_request_room(tty, count); @@ -453,10 +502,10 @@ static inline void sci_receive_chars(struct uart_port *port) } /* Store data and status */ - if (status&SCxSR_FER(port)) { + if (status & SCxSR_FER(port)) { flag = TTY_FRAME; dev_notice(port->dev, "frame error\n"); - } else if (status&SCxSR_PER(port)) { + } else if (status & SCxSR_PER(port)) { flag = TTY_PARITY; dev_notice(port->dev, "parity error\n"); } else @@ -618,13 +667,39 @@ static inline int sci_handle_breaks(struct uart_port *port) return copied; } -static irqreturn_t sci_rx_interrupt(int irq, void *port) +static irqreturn_t sci_rx_interrupt(int irq, void *ptr) { +#ifdef CONFIG_SERIAL_SH_SCI_DMA + struct uart_port *port = ptr; + struct sci_port *s = to_sci_port(port); + + if (s->chan_rx) { + unsigned long tout; + u16 scr = sci_in(port, SCSCR); + u16 ssr = sci_in(port, SCxSR); + + /* Disable future Rx interrupts */ + sci_out(port, SCSCR, scr & ~SCI_CTRL_FLAGS_RIE); + /* Clear current interrupt */ + sci_out(port, SCxSR, ssr & ~(1 | SCxSR_RDxF(port))); + /* Calculate delay for 1.5 DMA buffers */ + tout = (port->timeout - HZ / 50) * s->buf_len_rx * 3 / + port->fifosize / 2; + dev_dbg(port->dev, "Rx IRQ: setup timeout in %u ms\n", + tout * 1000 / HZ); + if (tout < 2) + tout = 2; + mod_timer(&s->rx_timer, jiffies + tout); + + return IRQ_HANDLED; + } +#endif + /* I think sci_receive_chars has to be called irrespective * of whether the I_IXOFF is set, otherwise, how is the interrupt * to be disabled? */ - sci_receive_chars(port); + sci_receive_chars(ptr); return IRQ_HANDLED; } @@ -680,6 +755,7 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr) { unsigned short ssr_status, scr_status, err_enabled; struct uart_port *port = ptr; + struct sci_port *s = to_sci_port(port); irqreturn_t ret = IRQ_NONE; ssr_status = sci_in(port, SCxSR); @@ -687,10 +763,15 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr) err_enabled = scr_status & (SCI_CTRL_FLAGS_REIE | SCI_CTRL_FLAGS_RIE); /* Tx Interrupt */ - if ((ssr_status & SCxSR_TDxE(port)) && (scr_status & SCI_CTRL_FLAGS_TIE)) + if ((ssr_status & SCxSR_TDxE(port)) && (scr_status & SCI_CTRL_FLAGS_TIE) && + !s->chan_tx) ret = sci_tx_interrupt(irq, ptr); - /* Rx Interrupt */ - if ((ssr_status & SCxSR_RDxF(port)) && (scr_status & SCI_CTRL_FLAGS_RIE)) + /* + * Rx Interrupt: if we're using DMA, the DMA controller clears RDF / + * DR flags + */ + if (((ssr_status & SCxSR_RDxF(port)) || s->chan_rx) && + (scr_status & SCI_CTRL_FLAGS_RIE)) ret = sci_rx_interrupt(irq, ptr); /* Error Interrupt */ if ((ssr_status & SCxSR_ERRORS(port)) && err_enabled) @@ -699,6 +780,10 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr) if ((ssr_status & SCxSR_BRK(port)) && err_enabled) ret = sci_br_interrupt(irq, ptr); + WARN_ONCE(ret == IRQ_NONE, + "%s: %d IRQ %d, status %x, control %x\n", __func__, + irq, port->line, ssr_status, scr_status); + return ret; } @@ -800,7 +885,9 @@ static void sci_free_irq(struct sci_port *port) static unsigned int sci_tx_empty(struct uart_port *port) { unsigned short status = sci_in(port, SCxSR); - return status & SCxSR_TEND(port) ? TIOCSER_TEMT : 0; + unsigned short in_tx_fifo = scif_txfill(port); + + return (status & SCxSR_TEND(port)) && !in_tx_fifo ? TIOCSER_TEMT : 0; } static void sci_set_mctrl(struct uart_port *port, unsigned int mctrl) @@ -812,16 +899,299 @@ static void sci_set_mctrl(struct uart_port *port, unsigned int mctrl) static unsigned int sci_get_mctrl(struct uart_port *port) { - /* This routine is used for geting signals of: DTR, DCD, DSR, RI, + /* This routine is used for getting signals of: DTR, DCD, DSR, RI, and CTS/RTS */ return TIOCM_DTR | TIOCM_RTS | TIOCM_DSR; } +#ifdef CONFIG_SERIAL_SH_SCI_DMA +static void sci_dma_tx_complete(void *arg) +{ + struct sci_port *s = arg; + struct uart_port *port = &s->port; + struct circ_buf *xmit = &port->state->xmit; + unsigned long flags; + + dev_dbg(port->dev, "%s(%d)\n", __func__, port->line); + + spin_lock_irqsave(&port->lock, flags); + + xmit->tail += s->sg_tx.length; + xmit->tail &= UART_XMIT_SIZE - 1; + + port->icount.tx += s->sg_tx.length; + + async_tx_ack(s->desc_tx); + s->cookie_tx = -EINVAL; + s->desc_tx = NULL; + + spin_unlock_irqrestore(&port->lock, flags); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_chars_pending(xmit)) + schedule_work(&s->work_tx); +} + +/* Locking: called with port lock held */ +static int sci_dma_rx_push(struct sci_port *s, struct tty_struct *tty, + size_t count) +{ + struct uart_port *port = &s->port; + int i, active, room; + + room = tty_buffer_request_room(tty, count); + + if (s->active_rx == s->cookie_rx[0]) { + active = 0; + } else if (s->active_rx == s->cookie_rx[1]) { + active = 1; + } else { + dev_err(port->dev, "cookie %d not found!\n", s->active_rx); + return 0; + } + + if (room < count) + dev_warn(port->dev, "Rx overrun: dropping %u bytes\n", + count - room); + if (!room) + return room; + + for (i = 0; i < room; i++) + tty_insert_flip_char(tty, ((u8 *)sg_virt(&s->sg_rx[active]))[i], + TTY_NORMAL); + + port->icount.rx += room; + + return room; +} + +static void sci_dma_rx_complete(void *arg) +{ + struct sci_port *s = arg; + struct uart_port *port = &s->port; + struct tty_struct *tty = port->state->port.tty; + unsigned long flags; + int count; + + dev_dbg(port->dev, "%s(%d)\n", __func__, port->line); + + spin_lock_irqsave(&port->lock, flags); + + count = sci_dma_rx_push(s, tty, s->buf_len_rx); + + mod_timer(&s->rx_timer, jiffies + msecs_to_jiffies(5)); + + spin_unlock_irqrestore(&port->lock, flags); + + if (count) + tty_flip_buffer_push(tty); + + schedule_work(&s->work_rx); +} + +static void sci_start_rx(struct uart_port *port); +static void sci_start_tx(struct uart_port *port); + +static void sci_rx_dma_release(struct sci_port *s, bool enable_pio) +{ + struct dma_chan *chan = s->chan_rx; + struct uart_port *port = &s->port; + unsigned long flags; + + s->chan_rx = NULL; + s->cookie_rx[0] = s->cookie_rx[1] = -EINVAL; + dma_release_channel(chan); + dma_free_coherent(port->dev, s->buf_len_rx * 2, + sg_virt(&s->sg_rx[0]), sg_dma_address(&s->sg_rx[0])); + if (enable_pio) + sci_start_rx(port); +} + +static void sci_tx_dma_release(struct sci_port *s, bool enable_pio) +{ + struct dma_chan *chan = s->chan_tx; + struct uart_port *port = &s->port; + unsigned long flags; + + s->chan_tx = NULL; + s->cookie_tx = -EINVAL; + dma_release_channel(chan); + if (enable_pio) + sci_start_tx(port); +} + +static void sci_submit_rx(struct sci_port *s) +{ + struct dma_chan *chan = s->chan_rx; + int i; + + for (i = 0; i < 2; i++) { + struct scatterlist *sg = &s->sg_rx[i]; + struct dma_async_tx_descriptor *desc; + + desc = chan->device->device_prep_slave_sg(chan, + sg, 1, DMA_FROM_DEVICE, DMA_PREP_INTERRUPT); + + if (desc) { + s->desc_rx[i] = desc; + desc->callback = sci_dma_rx_complete; + desc->callback_param = s; + s->cookie_rx[i] = desc->tx_submit(desc); + } + + if (!desc || s->cookie_rx[i] < 0) { + if (i) { + async_tx_ack(s->desc_rx[0]); + s->cookie_rx[0] = -EINVAL; + } + if (desc) { + async_tx_ack(desc); + s->cookie_rx[i] = -EINVAL; + } + dev_warn(s->port.dev, + "failed to re-start DMA, using PIO\n"); + sci_rx_dma_release(s, true); + return; + } + } + + s->active_rx = s->cookie_rx[0]; + + dma_async_issue_pending(chan); +} + +static void work_fn_rx(struct work_struct *work) +{ + struct sci_port *s = container_of(work, struct sci_port, work_rx); + struct uart_port *port = &s->port; + struct dma_async_tx_descriptor *desc; + int new; + + if (s->active_rx == s->cookie_rx[0]) { + new = 0; + } else if (s->active_rx == s->cookie_rx[1]) { + new = 1; + } else { + dev_err(port->dev, "cookie %d not found!\n", s->active_rx); + return; + } + desc = s->desc_rx[new]; + + if (dma_async_is_tx_complete(s->chan_rx, s->active_rx, NULL, NULL) != + DMA_SUCCESS) { + /* Handle incomplete DMA receive */ + struct tty_struct *tty = port->state->port.tty; + struct dma_chan *chan = s->chan_rx; + struct sh_desc *sh_desc = container_of(desc, struct sh_desc, + async_tx); + unsigned long flags; + int count; + + chan->device->device_terminate_all(chan); + dev_dbg(port->dev, "Read %u bytes with cookie %d\n", + sh_desc->partial, sh_desc->cookie); + + spin_lock_irqsave(&port->lock, flags); + count = sci_dma_rx_push(s, tty, sh_desc->partial); + spin_unlock_irqrestore(&port->lock, flags); + + if (count) + tty_flip_buffer_push(tty); + + sci_submit_rx(s); + + return; + } + + s->cookie_rx[new] = desc->tx_submit(desc); + if (s->cookie_rx[new] < 0) { + dev_warn(port->dev, "Failed submitting Rx DMA descriptor\n"); + sci_rx_dma_release(s, true); + return; + } + + dev_dbg(port->dev, "%s: cookie %d #%d\n", __func__, + s->cookie_rx[new], new); + + s->active_rx = s->cookie_rx[!new]; +} + +static void work_fn_tx(struct work_struct *work) +{ + struct sci_port *s = container_of(work, struct sci_port, work_tx); + struct dma_async_tx_descriptor *desc; + struct dma_chan *chan = s->chan_tx; + struct uart_port *port = &s->port; + struct circ_buf *xmit = &port->state->xmit; + struct scatterlist *sg = &s->sg_tx; + + /* + * DMA is idle now. + * Port xmit buffer is already mapped, and it is one page... Just adjust + * offsets and lengths. Since it is a circular buffer, we have to + * transmit till the end, and then the rest. Take the port lock to get a + * consistent xmit buffer state. + */ + spin_lock_irq(&port->lock); + sg->offset = xmit->tail & (UART_XMIT_SIZE - 1); + sg->dma_address = (sg_dma_address(sg) & ~(UART_XMIT_SIZE - 1)) + + sg->offset; + sg->length = min((int)CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE), + CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE)); + sg->dma_length = sg->length; + spin_unlock_irq(&port->lock); + + BUG_ON(!sg->length); + + desc = chan->device->device_prep_slave_sg(chan, + sg, s->sg_len_tx, DMA_TO_DEVICE, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) { + /* switch to PIO */ + sci_tx_dma_release(s, true); + return; + } + + dma_sync_sg_for_device(port->dev, sg, 1, DMA_TO_DEVICE); + + spin_lock_irq(&port->lock); + s->desc_tx = desc; + desc->callback = sci_dma_tx_complete; + desc->callback_param = s; + spin_unlock_irq(&port->lock); + s->cookie_tx = desc->tx_submit(desc); + if (s->cookie_tx < 0) { + dev_warn(port->dev, "Failed submitting Tx DMA descriptor\n"); + /* switch to PIO */ + sci_tx_dma_release(s, true); + return; + } + + dev_dbg(port->dev, "%s: %p: %d...%d, cookie %d\n", __func__, + xmit->buf, xmit->tail, xmit->head, s->cookie_tx); + + dma_async_issue_pending(chan); +} +#endif + static void sci_start_tx(struct uart_port *port) { unsigned short ctrl; +#ifdef CONFIG_SERIAL_SH_SCI_DMA + struct sci_port *s = to_sci_port(port); + + if (s->chan_tx) { + if (!uart_circ_empty(&s->port.state->xmit) && s->cookie_tx < 0) + schedule_work(&s->work_tx); + + return; + } +#endif + /* Set TIE (Transmit Interrupt Enable) bit in SCSCR */ ctrl = sci_in(port, SCSCR); ctrl |= SCI_CTRL_FLAGS_TIE; @@ -838,13 +1208,12 @@ static void sci_stop_tx(struct uart_port *port) sci_out(port, SCSCR, ctrl); } -static void sci_start_rx(struct uart_port *port, unsigned int tty_start) +static void sci_start_rx(struct uart_port *port) { - unsigned short ctrl; + unsigned short ctrl = SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE; /* Set RIE (Receive Interrupt Enable) bit in SCSCR */ - ctrl = sci_in(port, SCSCR); - ctrl |= SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE; + ctrl |= sci_in(port, SCSCR); sci_out(port, SCSCR, ctrl); } @@ -868,16 +1237,154 @@ static void sci_break_ctl(struct uart_port *port, int break_state) /* Nothing here yet .. */ } +#ifdef CONFIG_SERIAL_SH_SCI_DMA +static bool filter(struct dma_chan *chan, void *slave) +{ + struct sh_dmae_slave *param = slave; + + dev_dbg(chan->device->dev, "%s: slave ID %d\n", __func__, + param->slave_id); + + if (param->dma_dev == chan->device->dev) { + chan->private = param; + return true; + } else { + return false; + } +} + +static void rx_timer_fn(unsigned long arg) +{ + struct sci_port *s = (struct sci_port *)arg; + struct uart_port *port = &s->port; + + u16 scr = sci_in(port, SCSCR); + sci_out(port, SCSCR, scr | SCI_CTRL_FLAGS_RIE); + dev_dbg(port->dev, "DMA Rx timed out\n"); + schedule_work(&s->work_rx); +} + +static void sci_request_dma(struct uart_port *port) +{ + struct sci_port *s = to_sci_port(port); + struct sh_dmae_slave *param; + struct dma_chan *chan; + dma_cap_mask_t mask; + int nent; + + dev_dbg(port->dev, "%s: port %d DMA %p\n", __func__, + port->line, s->dma_dev); + + if (!s->dma_dev) + return; + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + param = &s->param_tx; + + /* Slave ID, e.g., SHDMA_SLAVE_SCIF0_TX */ + param->slave_id = s->slave_tx; + param->dma_dev = s->dma_dev; + + s->cookie_tx = -EINVAL; + chan = dma_request_channel(mask, filter, param); + dev_dbg(port->dev, "%s: TX: got channel %p\n", __func__, chan); + if (chan) { + s->chan_tx = chan; + sg_init_table(&s->sg_tx, 1); + /* UART circular tx buffer is an aligned page. */ + BUG_ON((int)port->state->xmit.buf & ~PAGE_MASK); + sg_set_page(&s->sg_tx, virt_to_page(port->state->xmit.buf), + UART_XMIT_SIZE, (int)port->state->xmit.buf & ~PAGE_MASK); + nent = dma_map_sg(port->dev, &s->sg_tx, 1, DMA_TO_DEVICE); + if (!nent) + sci_tx_dma_release(s, false); + else + dev_dbg(port->dev, "%s: mapped %d@%p to %x\n", __func__, + sg_dma_len(&s->sg_tx), + port->state->xmit.buf, sg_dma_address(&s->sg_tx)); + + s->sg_len_tx = nent; + + INIT_WORK(&s->work_tx, work_fn_tx); + } + + param = &s->param_rx; + + /* Slave ID, e.g., SHDMA_SLAVE_SCIF0_RX */ + param->slave_id = s->slave_rx; + param->dma_dev = s->dma_dev; + + chan = dma_request_channel(mask, filter, param); + dev_dbg(port->dev, "%s: RX: got channel %p\n", __func__, chan); + if (chan) { + dma_addr_t dma[2]; + void *buf[2]; + int i; + + s->chan_rx = chan; + + s->buf_len_rx = 2 * max(16, (int)port->fifosize); + buf[0] = dma_alloc_coherent(port->dev, s->buf_len_rx * 2, + &dma[0], GFP_KERNEL); + + if (!buf[0]) { + dev_warn(port->dev, + "failed to allocate dma buffer, using PIO\n"); + sci_rx_dma_release(s, true); + return; + } + + buf[1] = buf[0] + s->buf_len_rx; + dma[1] = dma[0] + s->buf_len_rx; + + for (i = 0; i < 2; i++) { + struct scatterlist *sg = &s->sg_rx[i]; + + sg_init_table(sg, 1); + sg_set_page(sg, virt_to_page(buf[i]), s->buf_len_rx, + (int)buf[i] & ~PAGE_MASK); + sg->dma_address = dma[i]; + sg->dma_length = sg->length; + } + + INIT_WORK(&s->work_rx, work_fn_rx); + setup_timer(&s->rx_timer, rx_timer_fn, (unsigned long)s); + + sci_submit_rx(s); + } +} + +static void sci_free_dma(struct uart_port *port) +{ + struct sci_port *s = to_sci_port(port); + + if (!s->dma_dev) + return; + + if (s->chan_tx) + sci_tx_dma_release(s, false); + if (s->chan_rx) + sci_rx_dma_release(s, false); +} +#endif + static int sci_startup(struct uart_port *port) { struct sci_port *s = to_sci_port(port); + dev_dbg(port->dev, "%s(%d)\n", __func__, port->line); + if (s->enable) s->enable(port); sci_request_irq(s); +#ifdef CONFIG_SERIAL_SH_SCI_DMA + sci_request_dma(port); +#endif sci_start_tx(port); - sci_start_rx(port, 1); + sci_start_rx(port); return 0; } @@ -886,8 +1393,13 @@ static void sci_shutdown(struct uart_port *port) { struct sci_port *s = to_sci_port(port); + dev_dbg(port->dev, "%s(%d)\n", __func__, port->line); + sci_stop_rx(port); sci_stop_tx(port); +#ifdef CONFIG_SERIAL_SH_SCI_DMA + sci_free_dma(port); +#endif sci_free_irq(s); if (s->disable) @@ -937,6 +1449,9 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, sci_out(port, SCSMR, smr_val); + dev_dbg(port->dev, "%s: SMR %x, t %x, SCSCR %x\n", __func__, smr_val, t, + SCSCR_INIT(port)); + if (t > 0) { if (t >= 256) { sci_out(port, SCSMR, (sci_in(port, SCSMR) & ~3) | 1); @@ -954,7 +1469,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, sci_out(port, SCSCR, SCSCR_INIT(port)); if ((termios->c_cflag & CREAD) != 0) - sci_start_rx(port, 0); + sci_start_rx(port); } static const char *sci_type(struct uart_port *port) @@ -1049,19 +1564,21 @@ static void __devinit sci_init_single(struct platform_device *dev, unsigned int index, struct plat_sci_port *p) { - sci_port->port.ops = &sci_uart_ops; - sci_port->port.iotype = UPIO_MEM; - sci_port->port.line = index; + struct uart_port *port = &sci_port->port; + + port->ops = &sci_uart_ops; + port->iotype = UPIO_MEM; + port->line = index; switch (p->type) { case PORT_SCIFA: - sci_port->port.fifosize = 64; + port->fifosize = 64; break; case PORT_SCIF: - sci_port->port.fifosize = 16; + port->fifosize = 16; break; default: - sci_port->port.fifosize = 1; + port->fifosize = 1; break; } @@ -1070,19 +1587,28 @@ static void __devinit sci_init_single(struct platform_device *dev, sci_port->dclk = clk_get(&dev->dev, "peripheral_clk"); sci_port->enable = sci_clk_enable; sci_port->disable = sci_clk_disable; - sci_port->port.dev = &dev->dev; + port->dev = &dev->dev; } sci_port->break_timer.data = (unsigned long)sci_port; sci_port->break_timer.function = sci_break_timer; init_timer(&sci_port->break_timer); - sci_port->port.mapbase = p->mapbase; - sci_port->port.membase = p->membase; + port->mapbase = p->mapbase; + port->membase = p->membase; - sci_port->port.irq = p->irqs[SCIx_TXI_IRQ]; - sci_port->port.flags = p->flags; - sci_port->type = sci_port->port.type = p->type; + port->irq = p->irqs[SCIx_TXI_IRQ]; + port->flags = p->flags; + sci_port->type = port->type = p->type; + +#ifdef CONFIG_SERIAL_SH_SCI_DMA + sci_port->dma_dev = p->dma_dev; + sci_port->slave_tx = p->dma_slave_tx; + sci_port->slave_rx = p->dma_slave_rx; + + dev_dbg(port->dev, "%s: DMA device %p, tx %d, rx %d\n", __func__, + p->dma_dev, p->dma_slave_tx, p->dma_slave_rx); +#endif memcpy(&sci_port->irqs, &p->irqs, sizeof(p->irqs)); } diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h index 1c297ddc9d5a..1b177d29a7f0 100644 --- a/include/linux/serial_sci.h +++ b/include/linux/serial_sci.h @@ -2,6 +2,7 @@ #define __LINUX_SERIAL_SCI_H #include +#include /* * Generic header for SuperH SCI(F) (used by sh/sh64/h8300 and related parts) @@ -16,6 +17,8 @@ enum { SCIx_NR_IRQS, }; +struct device; + /* * Platform device specific platform_data struct */ @@ -26,6 +29,9 @@ struct plat_sci_port { unsigned int type; /* SCI / SCIF / IRDA */ upf_t flags; /* UPF_* flags */ char *clk; /* clock string */ + struct device *dma_dev; + enum sh_dmae_slave_chan_id dma_slave_tx; + enum sh_dmae_slave_chan_id dma_slave_rx; }; #endif /* __LINUX_SERIAL_SCI_H */ -- cgit v1.2.3 From c6efd46b98f30863ca3a9982312db87b826cf715 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 2 Mar 2010 11:53:54 +0900 Subject: serial: sh-sci: Tidy up build warnings. The recent sh-sci DMA support introduces a number of trivial build warnings, clean them up. Signed-off-by: Paul Mundt --- drivers/serial/sh-sci.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index f3841cd8fc5d..980f39449ee5 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -685,7 +685,7 @@ static irqreturn_t sci_rx_interrupt(int irq, void *ptr) /* Calculate delay for 1.5 DMA buffers */ tout = (port->timeout - HZ / 50) * s->buf_len_rx * 3 / port->fifosize / 2; - dev_dbg(port->dev, "Rx IRQ: setup timeout in %u ms\n", + dev_dbg(port->dev, "Rx IRQ: setup timeout in %lu ms\n", tout * 1000 / HZ); if (tout < 2) tout = 2; @@ -999,7 +999,6 @@ static void sci_rx_dma_release(struct sci_port *s, bool enable_pio) { struct dma_chan *chan = s->chan_rx; struct uart_port *port = &s->port; - unsigned long flags; s->chan_rx = NULL; s->cookie_rx[0] = s->cookie_rx[1] = -EINVAL; @@ -1014,7 +1013,6 @@ static void sci_tx_dma_release(struct sci_port *s, bool enable_pio) { struct dma_chan *chan = s->chan_tx; struct uart_port *port = &s->port; - unsigned long flags; s->chan_tx = NULL; s->cookie_tx = -EINVAL; -- cgit v1.2.3 From ccf68e59e93181df9353c0cc721459d18ff200b6 Mon Sep 17 00:00:00 2001 From: sonic zhang Date: Wed, 9 Dec 2009 12:31:28 -0800 Subject: serial: fit blackfin uart over sport driver into common uart infrastructure Fit blackfin uart over sport driver into common uart inftrastructure. It is based on the early platform interfaces to get the platform data early when the console is initilized. 1. Enable sport uart driver to change uart baud, data bit, stop bit at runtime. Bind the index of uart device nodes to physical index of sports. 2. Move all platform data into arch specific board files. Register and probe platform device data in both early and normal stages. 3. Console is registered in sport uart driver as well. 4. Remove 500 us block waiting in sport tx stop code by putting a dummy data into tx fifo to make sure the sport tx stops when all bytes are shifted out except for the dummy data. 5. clean up a bit and fix up coding style. Signed-off-by: Sonic Zhang Cc: Alan Cox Cc: Mike Frysinger Cc: Bryan Wu Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/serial/Kconfig | 52 ++- drivers/serial/bfin_sport_uart.c | 701 ++++++++++++++++++++++++++------------- drivers/serial/bfin_sport_uart.h | 38 +-- 3 files changed, 511 insertions(+), 280 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 888a0ce91c4b..cb935b1f4f6c 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -1418,38 +1418,34 @@ config SERIAL_BFIN_SPORT To compile this driver as a module, choose M here: the module will be called bfin_sport_uart. -choice - prompt "Baud rate for Blackfin SPORT UART" - depends on SERIAL_BFIN_SPORT - default SERIAL_SPORT_BAUD_RATE_57600 - help - Choose a baud rate for the SPORT UART, other uart settings are - 8 bit, 1 stop bit, no parity, no flow control. - -config SERIAL_SPORT_BAUD_RATE_115200 - bool "115200" - -config SERIAL_SPORT_BAUD_RATE_57600 - bool "57600" +config SERIAL_BFIN_SPORT_CONSOLE + bool "Console on Blackfin sport emulated uart" + depends on SERIAL_BFIN_SPORT=y + select SERIAL_CORE_CONSOLE -config SERIAL_SPORT_BAUD_RATE_38400 - bool "38400" +config SERIAL_BFIN_SPORT0_UART + bool "Enable UART over SPORT0" + depends on SERIAL_BFIN_SPORT && !(BF542 || BF542M || BF544 || BF544M) + help + Enable UART over SPORT0 -config SERIAL_SPORT_BAUD_RATE_19200 - bool "19200" +config SERIAL_BFIN_SPORT1_UART + bool "Enable UART over SPORT1" + depends on SERIAL_BFIN_SPORT + help + Enable UART over SPORT1 -config SERIAL_SPORT_BAUD_RATE_9600 - bool "9600" -endchoice +config SERIAL_BFIN_SPORT2_UART + bool "Enable UART over SPORT2" + depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539) + help + Enable UART over SPORT2 -config SPORT_BAUD_RATE - int - depends on SERIAL_BFIN_SPORT - default 115200 if (SERIAL_SPORT_BAUD_RATE_115200) - default 57600 if (SERIAL_SPORT_BAUD_RATE_57600) - default 38400 if (SERIAL_SPORT_BAUD_RATE_38400) - default 19200 if (SERIAL_SPORT_BAUD_RATE_19200) - default 9600 if (SERIAL_SPORT_BAUD_RATE_9600) +config SERIAL_BFIN_SPORT3_UART + bool "Enable UART over SPORT3" + depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539) + help + Enable UART over SPORT3 config SERIAL_TIMBERDALE tristate "Support for timberdale UART" diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c index 088bb35475f1..7c72888fbf94 100644 --- a/drivers/serial/bfin_sport_uart.c +++ b/drivers/serial/bfin_sport_uart.c @@ -1,27 +1,11 @@ /* - * File: linux/drivers/serial/bfin_sport_uart.c + * Blackfin On-Chip Sport Emulated UART Driver * - * Based on: drivers/serial/bfin_5xx.c by Aubrey Li. - * Author: Roy Huang + * Copyright 2006-2009 Analog Devices Inc. * - * Created: Nov 22, 2006 - * Copyright: (c) 2006-2007 Analog Devices Inc. - * Description: this driver enable SPORTs on Blackfin emulate UART. + * Enter bugs at http://blackfin.uclinux.org/ * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ /* @@ -29,39 +13,18 @@ * http://www.analog.com/UploadedFiles/Application_Notes/399447663EE191.pdf * This application note describe how to implement a UART on a Sharc DSP, * but this driver is implemented on Blackfin Processor. + * Transmit Frame Sync is not used by this driver to transfer data out. */ -/* After reset, there is a prelude of low level pulse when transmit data first - * time. No addtional pulse in following transmit. - * According to document: - * The SPORTs are ready to start transmitting or receiving data no later than - * three serial clock cycles after they are enabled in the SPORTx_TCR1 or - * SPORTx_RCR1 register. No serial clock cycles are lost from this point on. - * The first internal frame sync will occur one frame sync delay after the - * SPORTs are ready. External frame syncs can occur as soon as the SPORT is - * ready. - */ +/* #define DEBUG */ -/* Thanks to Axel Alatalo for fixing sport rx bug. Sometimes - * sport receives data incorrectly. The following is Axel's words. - * As EE-191, sport rx samples 3 times of the UART baudrate and takes the - * middle smaple of every 3 samples as the data bit. For a 8-N-1 UART setting, - * 30 samples will be required for a byte. If transmitter sends a 1/3 bit short - * byte due to buadrate drift, then the 30th sample of a byte, this sample is - * also the third sample of the stop bit, will happens on the immediately - * following start bit which will be thrown away and missed. Thus since parts - * of the startbit will be missed and the receiver will begin to drift, the - * effect accumulates over time until synchronization is lost. - * If only require 2 samples of the stopbit (by sampling in total 29 samples), - * then a to short byte as in the case above will be tolerated. Then the 1/3 - * early startbit will trigger a framesync since the last read is complete - * after only 2/3 stopbit and framesync is active during the last 1/3 looking - * for a possible early startbit. */ - -//#define DEBUG +#define DRV_NAME "bfin-sport-uart" +#define DEVICE_NAME "ttySS" +#define pr_fmt(fmt) DRV_NAME ": " fmt #include #include +#include #include #include #include @@ -75,23 +38,36 @@ #include "bfin_sport_uart.h" +#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART unsigned short bfin_uart_pin_req_sport0[] = {P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, \ P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0}; - +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART unsigned short bfin_uart_pin_req_sport1[] = {P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, \ P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0}; - -#define DRV_NAME "bfin-sport-uart" +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART +unsigned short bfin_uart_pin_req_sport2[] = + {P_SPORT2_TFS, P_SPORT2_DTPRI, P_SPORT2_TSCLK, P_SPORT2_RFS, \ + P_SPORT2_DRPRI, P_SPORT2_RSCLK, P_SPORT2_DRSEC, P_SPORT2_DTSEC, 0}; +#endif +#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART +unsigned short bfin_uart_pin_req_sport3[] = + {P_SPORT3_TFS, P_SPORT3_DTPRI, P_SPORT3_TSCLK, P_SPORT3_RFS, \ + P_SPORT3_DRPRI, P_SPORT3_RSCLK, P_SPORT3_DRSEC, P_SPORT3_DTSEC, 0}; +#endif struct sport_uart_port { struct uart_port port; - char *name; - - int tx_irq; - int rx_irq; int err_irq; + unsigned short csize; + unsigned short rxmask; + unsigned short txmask1; + unsigned short txmask2; + unsigned char stopb; +/* unsigned char parib; */ }; static void sport_uart_tx_chars(struct sport_uart_port *up); @@ -99,36 +75,42 @@ static void sport_stop_tx(struct uart_port *port); static inline void tx_one_byte(struct sport_uart_port *up, unsigned int value) { - pr_debug("%s value:%x\n", __func__, value); - /* Place a Start and Stop bit */ + pr_debug("%s value:%x, mask1=0x%x, mask2=0x%x\n", __func__, value, + up->txmask1, up->txmask2); + + /* Place Start and Stop bits */ __asm__ __volatile__ ( - "R2 = b#01111111100;" - "R3 = b#10000000001;" - "%0 <<= 2;" - "%0 = %0 & R2;" - "%0 = %0 | R3;" - : "=d"(value) - : "d"(value) - : "ASTAT", "R2", "R3" + "%[val] <<= 1;" + "%[val] = %[val] & %[mask1];" + "%[val] = %[val] | %[mask2];" + : [val]"+d"(value) + : [mask1]"d"(up->txmask1), [mask2]"d"(up->txmask2) + : "ASTAT" ); pr_debug("%s value:%x\n", __func__, value); SPORT_PUT_TX(up, value); } -static inline unsigned int rx_one_byte(struct sport_uart_port *up) +static inline unsigned char rx_one_byte(struct sport_uart_port *up) { - unsigned int value, extract; + unsigned int value; + unsigned char extract; u32 tmp_mask1, tmp_mask2, tmp_shift, tmp; - value = SPORT_GET_RX32(up); - pr_debug("%s value:%x\n", __func__, value); + if ((up->csize + up->stopb) > 7) + value = SPORT_GET_RX32(up); + else + value = SPORT_GET_RX(up); + + pr_debug("%s value:%x, cs=%d, mask=0x%x\n", __func__, value, + up->csize, up->rxmask); - /* Extract 8 bits data */ + /* Extract data */ __asm__ __volatile__ ( "%[extr] = 0;" - "%[mask1] = 0x1801(Z);" - "%[mask2] = 0x0300(Z);" + "%[mask1] = %[rxmask];" + "%[mask2] = 0x0200(Z);" "%[shift] = 0;" "LSETUP(.Lloop_s, .Lloop_e) LC0 = %[lc];" ".Lloop_s:" @@ -138,9 +120,9 @@ static inline unsigned int rx_one_byte(struct sport_uart_port *up) "%[mask1] = %[mask1] - %[mask2];" ".Lloop_e:" "%[shift] += 1;" - : [val]"=d"(value), [extr]"=d"(extract), [shift]"=d"(tmp_shift), [tmp]"=d"(tmp), - [mask1]"=d"(tmp_mask1), [mask2]"=d"(tmp_mask2) - : "d"(value), [lc]"a"(8) + : [extr]"=&d"(extract), [shift]"=&d"(tmp_shift), [tmp]"=&d"(tmp), + [mask1]"=&d"(tmp_mask1), [mask2]"=&d"(tmp_mask2) + : [val]"d"(value), [rxmask]"d"(up->rxmask), [lc]"a"(up->csize) : "ASTAT", "LB0", "LC0", "LT0" ); @@ -148,29 +130,28 @@ static inline unsigned int rx_one_byte(struct sport_uart_port *up) return extract; } -static int sport_uart_setup(struct sport_uart_port *up, int sclk, int baud_rate) +static int sport_uart_setup(struct sport_uart_port *up, int size, int baud_rate) { - int tclkdiv, tfsdiv, rclkdiv; + int tclkdiv, rclkdiv; + unsigned int sclk = get_sclk(); - /* Set TCR1 and TCR2 */ - SPORT_PUT_TCR1(up, (LATFS | ITFS | TFSR | TLSBIT | ITCLK)); - SPORT_PUT_TCR2(up, 10); + /* Set TCR1 and TCR2, TFSR is not enabled for uart */ + SPORT_PUT_TCR1(up, (ITFS | TLSBIT | ITCLK)); + SPORT_PUT_TCR2(up, size + 1); pr_debug("%s TCR1:%x, TCR2:%x\n", __func__, SPORT_GET_TCR1(up), SPORT_GET_TCR2(up)); /* Set RCR1 and RCR2 */ SPORT_PUT_RCR1(up, (RCKFE | LARFS | LRFS | RFSR | IRCLK)); - SPORT_PUT_RCR2(up, 28); + SPORT_PUT_RCR2(up, (size + 1) * 2 - 1); pr_debug("%s RCR1:%x, RCR2:%x\n", __func__, SPORT_GET_RCR1(up), SPORT_GET_RCR2(up)); - tclkdiv = sclk/(2 * baud_rate) - 1; - tfsdiv = 12; - rclkdiv = sclk/(2 * baud_rate * 3) - 1; + tclkdiv = sclk / (2 * baud_rate) - 1; + rclkdiv = sclk / (2 * baud_rate * 2) - 1; SPORT_PUT_TCLKDIV(up, tclkdiv); - SPORT_PUT_TFSDIV(up, tfsdiv); SPORT_PUT_RCLKDIV(up, rclkdiv); SSYNC(); - pr_debug("%s sclk:%d, baud_rate:%d, tclkdiv:%d, tfsdiv:%d, rclkdiv:%d\n", - __func__, sclk, baud_rate, tclkdiv, tfsdiv, rclkdiv); + pr_debug("%s sclk:%d, baud_rate:%d, tclkdiv:%d, rclkdiv:%d\n", + __func__, sclk, baud_rate, tclkdiv, rclkdiv); return 0; } @@ -181,23 +162,29 @@ static irqreturn_t sport_uart_rx_irq(int irq, void *dev_id) struct tty_struct *tty = up->port.state->port.tty; unsigned int ch; - do { + spin_lock(&up->port.lock); + + while (SPORT_GET_STAT(up) & RXNE) { ch = rx_one_byte(up); up->port.icount.rx++; - if (uart_handle_sysrq_char(&up->port, ch)) - ; - else + if (!uart_handle_sysrq_char(&up->port, ch)) tty_insert_flip_char(tty, ch, TTY_NORMAL); - } while (SPORT_GET_STAT(up) & RXNE); + } tty_flip_buffer_push(tty); + spin_unlock(&up->port.lock); + return IRQ_HANDLED; } static irqreturn_t sport_uart_tx_irq(int irq, void *dev_id) { - sport_uart_tx_chars(dev_id); + struct sport_uart_port *up = dev_id; + + spin_lock(&up->port.lock); + sport_uart_tx_chars(up); + spin_unlock(&up->port.lock); return IRQ_HANDLED; } @@ -208,6 +195,8 @@ static irqreturn_t sport_uart_err_irq(int irq, void *dev_id) struct tty_struct *tty = up->port.state->port.tty; unsigned int stat = SPORT_GET_STAT(up); + spin_lock(&up->port.lock); + /* Overflow in RX FIFO */ if (stat & ROVF) { up->port.icount.overrun++; @@ -216,15 +205,16 @@ static irqreturn_t sport_uart_err_irq(int irq, void *dev_id) } /* These should not happen */ if (stat & (TOVF | TUVF | RUVF)) { - printk(KERN_ERR "SPORT Error:%s %s %s\n", - (stat & TOVF)?"TX overflow":"", - (stat & TUVF)?"TX underflow":"", - (stat & RUVF)?"RX underflow":""); + pr_err("SPORT Error:%s %s %s\n", + (stat & TOVF) ? "TX overflow" : "", + (stat & TUVF) ? "TX underflow" : "", + (stat & RUVF) ? "RX underflow" : ""); SPORT_PUT_TCR1(up, SPORT_GET_TCR1(up) & ~TSPEN); SPORT_PUT_RCR1(up, SPORT_GET_RCR1(up) & ~RSPEN); } SSYNC(); + spin_unlock(&up->port.lock); return IRQ_HANDLED; } @@ -232,60 +222,37 @@ static irqreturn_t sport_uart_err_irq(int irq, void *dev_id) static int sport_startup(struct uart_port *port) { struct sport_uart_port *up = (struct sport_uart_port *)port; - char buffer[20]; - int retval; + int ret; pr_debug("%s enter\n", __func__); - snprintf(buffer, 20, "%s rx", up->name); - retval = request_irq(up->rx_irq, sport_uart_rx_irq, IRQF_SAMPLE_RANDOM, buffer, up); - if (retval) { - printk(KERN_ERR "Unable to request interrupt %s\n", buffer); - return retval; + ret = request_irq(up->port.irq, sport_uart_rx_irq, 0, + "SPORT_UART_RX", up); + if (ret) { + dev_err(port->dev, "unable to request SPORT RX interrupt\n"); + return ret; } - snprintf(buffer, 20, "%s tx", up->name); - retval = request_irq(up->tx_irq, sport_uart_tx_irq, IRQF_SAMPLE_RANDOM, buffer, up); - if (retval) { - printk(KERN_ERR "Unable to request interrupt %s\n", buffer); + ret = request_irq(up->port.irq+1, sport_uart_tx_irq, 0, + "SPORT_UART_TX", up); + if (ret) { + dev_err(port->dev, "unable to request SPORT TX interrupt\n"); goto fail1; } - snprintf(buffer, 20, "%s err", up->name); - retval = request_irq(up->err_irq, sport_uart_err_irq, IRQF_SAMPLE_RANDOM, buffer, up); - if (retval) { - printk(KERN_ERR "Unable to request interrupt %s\n", buffer); + ret = request_irq(up->err_irq, sport_uart_err_irq, 0, + "SPORT_UART_STATUS", up); + if (ret) { + dev_err(port->dev, "unable to request SPORT status interrupt\n"); goto fail2; } - if (port->line) { - if (peripheral_request_list(bfin_uart_pin_req_sport1, DRV_NAME)) - goto fail3; - } else { - if (peripheral_request_list(bfin_uart_pin_req_sport0, DRV_NAME)) - goto fail3; - } - - sport_uart_setup(up, get_sclk(), port->uartclk); - - /* Enable receive interrupt */ - SPORT_PUT_RCR1(up, (SPORT_GET_RCR1(up) | RSPEN)); - SSYNC(); - return 0; + fail2: + free_irq(up->port.irq+1, up); + fail1: + free_irq(up->port.irq, up); - -fail3: - printk(KERN_ERR DRV_NAME - ": Requesting Peripherals failed\n"); - - free_irq(up->err_irq, up); -fail2: - free_irq(up->tx_irq, up); -fail1: - free_irq(up->rx_irq, up); - - return retval; - + return ret; } static void sport_uart_tx_chars(struct sport_uart_port *up) @@ -344,20 +311,17 @@ static void sport_set_mctrl(struct uart_port *port, unsigned int mctrl) static void sport_stop_tx(struct uart_port *port) { struct sport_uart_port *up = (struct sport_uart_port *)port; - unsigned int stat; pr_debug("%s enter\n", __func__); - stat = SPORT_GET_STAT(up); - while(!(stat & TXHRE)) { - udelay(1); - stat = SPORT_GET_STAT(up); - } /* Although the hold register is empty, last byte is still in shift - * register and not sent out yet. If baud rate is lower than default, - * delay should be longer. For example, if the baud rate is 9600, - * the delay must be at least 2ms by experience */ - udelay(500); + * register and not sent out yet. So, put a dummy data into TX FIFO. + * Then, sport tx stops when last byte is shift out and the dummy + * data is moved into the shift register. + */ + SPORT_PUT_TX(up, 0xffff); + while (!(SPORT_GET_STAT(up) & TXHRE)) + cpu_relax(); SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) & ~TSPEN)); SSYNC(); @@ -370,6 +334,7 @@ static void sport_start_tx(struct uart_port *port) struct sport_uart_port *up = (struct sport_uart_port *)port; pr_debug("%s enter\n", __func__); + /* Write data into SPORT FIFO before enable SPROT to transmit */ sport_uart_tx_chars(up); @@ -403,37 +368,24 @@ static void sport_shutdown(struct uart_port *port) { struct sport_uart_port *up = (struct sport_uart_port *)port; - pr_debug("%s enter\n", __func__); + dev_dbg(port->dev, "%s enter\n", __func__); /* Disable sport */ SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) & ~TSPEN)); SPORT_PUT_RCR1(up, (SPORT_GET_RCR1(up) & ~RSPEN)); SSYNC(); - if (port->line) { - peripheral_free_list(bfin_uart_pin_req_sport1); - } else { - peripheral_free_list(bfin_uart_pin_req_sport0); - } - - free_irq(up->rx_irq, up); - free_irq(up->tx_irq, up); + free_irq(up->port.irq, up); + free_irq(up->port.irq+1, up); free_irq(up->err_irq, up); } -static void sport_set_termios(struct uart_port *port, - struct ktermios *termios, struct ktermios *old) -{ - pr_debug("%s enter, c_cflag:%08x\n", __func__, termios->c_cflag); - uart_update_timeout(port, CS8 ,port->uartclk); -} - static const char *sport_type(struct uart_port *port) { struct sport_uart_port *up = (struct sport_uart_port *)port; pr_debug("%s enter\n", __func__); - return up->name; + return up->port.type == PORT_BFIN_SPORT ? "BFIN-SPORT-UART" : NULL; } static void sport_release_port(struct uart_port *port) @@ -461,6 +413,110 @@ static int sport_verify_port(struct uart_port *port, struct serial_struct *ser) return 0; } +static void sport_set_termios(struct uart_port *port, + struct ktermios *termios, struct ktermios *old) +{ + struct sport_uart_port *up = (struct sport_uart_port *)port; + unsigned long flags; + int i; + + pr_debug("%s enter, c_cflag:%08x\n", __func__, termios->c_cflag); + + switch (termios->c_cflag & CSIZE) { + case CS8: + up->csize = 8; + break; + case CS7: + up->csize = 7; + break; + case CS6: + up->csize = 6; + break; + case CS5: + up->csize = 5; + break; + default: + pr_warning("requested word length not supported\n"); + } + + if (termios->c_cflag & CSTOPB) { + up->stopb = 1; + } + if (termios->c_cflag & PARENB) { + pr_warning("PAREN bits is not supported yet\n"); + /* up->parib = 1; */ + } + + port->read_status_mask = OE; + if (termios->c_iflag & INPCK) + port->read_status_mask |= (FE | PE); + if (termios->c_iflag & (BRKINT | PARMRK)) + port->read_status_mask |= BI; + + /* + * Characters to ignore + */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= FE | PE; + if (termios->c_iflag & IGNBRK) { + port->ignore_status_mask |= BI; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= OE; + } + + /* RX extract mask */ + up->rxmask = 0x01 | (((up->csize + up->stopb) * 2 - 1) << 0x8); + /* TX masks, 8 bit data and 1 bit stop for example: + * mask1 = b#0111111110 + * mask2 = b#1000000000 + */ + for (i = 0, up->txmask1 = 0; i < up->csize; i++) + up->txmask1 |= (1<txmask2 = (1<stopb) { + ++i; + up->txmask2 |= (1<txmask1 <<= 1; + up->txmask2 <<= 1; + /* uart baud rate */ + port->uartclk = uart_get_baud_rate(port, termios, old, 0, get_sclk()/16); + + spin_lock_irqsave(&up->port.lock, flags); + + /* Disable UART */ + SPORT_PUT_TCR1(up, SPORT_GET_TCR1(up) & ~TSPEN); + SPORT_PUT_RCR1(up, SPORT_GET_RCR1(up) & ~RSPEN); + + sport_uart_setup(up, up->csize + up->stopb, port->uartclk); + + /* driver TX line high after config, one dummy data is + * necessary to stop sport after shift one byte + */ + SPORT_PUT_TX(up, 0xffff); + SPORT_PUT_TX(up, 0xffff); + SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) | TSPEN)); + SSYNC(); + while (!(SPORT_GET_STAT(up) & TXHRE)) + cpu_relax(); + SPORT_PUT_TCR1(up, SPORT_GET_TCR1(up) & ~TSPEN); + SSYNC(); + + /* Port speed changed, update the per-port timeout. */ + uart_update_timeout(port, termios->c_cflag, port->uartclk); + + /* Enable sport rx */ + SPORT_PUT_RCR1(up, SPORT_GET_RCR1(up) | RSPEN); + SSYNC(); + + spin_unlock_irqrestore(&up->port.lock, flags); +} + struct uart_ops sport_uart_ops = { .tx_empty = sport_tx_empty, .set_mctrl = sport_set_mctrl, @@ -480,138 +536,319 @@ struct uart_ops sport_uart_ops = { .verify_port = sport_verify_port, }; -static struct sport_uart_port sport_uart_ports[] = { - { /* SPORT 0 */ - .name = "SPORT0", - .tx_irq = IRQ_SPORT0_TX, - .rx_irq = IRQ_SPORT0_RX, - .err_irq= IRQ_SPORT0_ERROR, - .port = { - .type = PORT_BFIN_SPORT, - .iotype = UPIO_MEM, - .membase = (void __iomem *)SPORT0_TCR1, - .mapbase = SPORT0_TCR1, - .irq = IRQ_SPORT0_RX, - .uartclk = CONFIG_SPORT_BAUD_RATE, - .fifosize = 8, - .ops = &sport_uart_ops, - .line = 0, - }, - }, { /* SPORT 1 */ - .name = "SPORT1", - .tx_irq = IRQ_SPORT1_TX, - .rx_irq = IRQ_SPORT1_RX, - .err_irq= IRQ_SPORT1_ERROR, - .port = { - .type = PORT_BFIN_SPORT, - .iotype = UPIO_MEM, - .membase = (void __iomem *)SPORT1_TCR1, - .mapbase = SPORT1_TCR1, - .irq = IRQ_SPORT1_RX, - .uartclk = CONFIG_SPORT_BAUD_RATE, - .fifosize = 8, - .ops = &sport_uart_ops, - .line = 1, - }, +#define BFIN_SPORT_UART_MAX_PORTS 4 + +static struct sport_uart_port *bfin_sport_uart_ports[BFIN_SPORT_UART_MAX_PORTS]; + +#ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE +static int __init +sport_uart_console_setup(struct console *co, char *options) +{ + struct sport_uart_port *up; + int baud = 57600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* Check whether an invalid uart number has been specified */ + if (co->index < 0 || co->index >= BFIN_SPORT_UART_MAX_PORTS) + return -ENODEV; + + up = bfin_sport_uart_ports[co->index]; + if (!up) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(&up->port, co, baud, parity, bits, flow); +} + +static void sport_uart_console_putchar(struct uart_port *port, int ch) +{ + struct sport_uart_port *up = (struct sport_uart_port *)port; + + while (SPORT_GET_STAT(up) & TXF) + barrier(); + + tx_one_byte(up, ch); +} + +/* + * Interrupts are disabled on entering + */ +static void +sport_uart_console_write(struct console *co, const char *s, unsigned int count) +{ + struct sport_uart_port *up = bfin_sport_uart_ports[co->index]; + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + + if (SPORT_GET_TCR1(up) & TSPEN) + uart_console_write(&up->port, s, count, sport_uart_console_putchar); + else { + /* dummy data to start sport */ + while (SPORT_GET_STAT(up) & TXF) + barrier(); + SPORT_PUT_TX(up, 0xffff); + /* Enable transmit, then an interrupt will generated */ + SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) | TSPEN)); + SSYNC(); + + uart_console_write(&up->port, s, count, sport_uart_console_putchar); + + /* Although the hold register is empty, last byte is still in shift + * register and not sent out yet. So, put a dummy data into TX FIFO. + * Then, sport tx stops when last byte is shift out and the dummy + * data is moved into the shift register. + */ + while (SPORT_GET_STAT(up) & TXF) + barrier(); + SPORT_PUT_TX(up, 0xffff); + while (!(SPORT_GET_STAT(up) & TXHRE)) + barrier(); + + /* Stop sport tx transfer */ + SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) & ~TSPEN)); + SSYNC(); } + + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static struct uart_driver sport_uart_reg; + +static struct console sport_uart_console = { + .name = DEVICE_NAME, + .write = sport_uart_console_write, + .device = uart_console_device, + .setup = sport_uart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &sport_uart_reg, }; +#define SPORT_UART_CONSOLE (&sport_uart_console) +#else +#define SPORT_UART_CONSOLE NULL +#endif /* CONFIG_SERIAL_BFIN_SPORT_CONSOLE */ + + static struct uart_driver sport_uart_reg = { .owner = THIS_MODULE, - .driver_name = "SPORT-UART", - .dev_name = "ttySS", + .driver_name = DRV_NAME, + .dev_name = DEVICE_NAME, .major = 204, .minor = 84, - .nr = ARRAY_SIZE(sport_uart_ports), - .cons = NULL, + .nr = BFIN_SPORT_UART_MAX_PORTS, + .cons = SPORT_UART_CONSOLE, }; -static int sport_uart_suspend(struct platform_device *dev, pm_message_t state) +#ifdef CONFIG_PM +static int sport_uart_suspend(struct device *dev) { - struct sport_uart_port *sport = platform_get_drvdata(dev); + struct sport_uart_port *sport = dev_get_drvdata(dev); - pr_debug("%s enter\n", __func__); + dev_dbg(dev, "%s enter\n", __func__); if (sport) uart_suspend_port(&sport_uart_reg, &sport->port); return 0; } -static int sport_uart_resume(struct platform_device *dev) +static int sport_uart_resume(struct device *dev) { - struct sport_uart_port *sport = platform_get_drvdata(dev); + struct sport_uart_port *sport = dev_get_drvdata(dev); - pr_debug("%s enter\n", __func__); + dev_dbg(dev, "%s enter\n", __func__); if (sport) uart_resume_port(&sport_uart_reg, &sport->port); return 0; } -static int sport_uart_probe(struct platform_device *dev) +static struct dev_pm_ops bfin_sport_uart_dev_pm_ops = { + .suspend = sport_uart_suspend, + .resume = sport_uart_resume, +}; +#endif + +static int __devinit sport_uart_probe(struct platform_device *pdev) { - pr_debug("%s enter\n", __func__); - sport_uart_ports[dev->id].port.dev = &dev->dev; - uart_add_one_port(&sport_uart_reg, &sport_uart_ports[dev->id].port); - platform_set_drvdata(dev, &sport_uart_ports[dev->id]); + struct resource *res; + struct sport_uart_port *sport; + int ret = 0; - return 0; + dev_dbg(&pdev->dev, "%s enter\n", __func__); + + if (pdev->id < 0 || pdev->id >= BFIN_SPORT_UART_MAX_PORTS) { + dev_err(&pdev->dev, "Wrong sport uart platform device id.\n"); + return -ENOENT; + } + + if (bfin_sport_uart_ports[pdev->id] == NULL) { + bfin_sport_uart_ports[pdev->id] = + kmalloc(sizeof(struct sport_uart_port), GFP_KERNEL); + sport = bfin_sport_uart_ports[pdev->id]; + if (!sport) { + dev_err(&pdev->dev, + "Fail to kmalloc sport_uart_port\n"); + return -ENOMEM; + } + + ret = peripheral_request_list( + (unsigned short *)pdev->dev.platform_data, DRV_NAME); + if (ret) { + dev_err(&pdev->dev, + "Fail to request SPORT peripherals\n"); + goto out_error_free_mem; + } + + spin_lock_init(&sport->port.lock); + sport->port.fifosize = SPORT_TX_FIFO_SIZE, + sport->port.ops = &sport_uart_ops; + sport->port.line = pdev->id; + sport->port.iotype = UPIO_MEM; + sport->port.flags = UPF_BOOT_AUTOCONF; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n"); + ret = -ENOENT; + goto out_error_free_peripherals; + } + + sport->port.membase = ioremap(res->start, + res->end - res->start); + if (!sport->port.membase) { + dev_err(&pdev->dev, "Cannot map sport IO\n"); + ret = -ENXIO; + goto out_error_free_peripherals; + } + + sport->port.irq = platform_get_irq(pdev, 0); + if (sport->port.irq < 0) { + dev_err(&pdev->dev, "No sport RX/TX IRQ specified\n"); + ret = -ENOENT; + goto out_error_unmap; + } + + sport->err_irq = platform_get_irq(pdev, 1); + if (sport->err_irq < 0) { + dev_err(&pdev->dev, "No sport status IRQ specified\n"); + ret = -ENOENT; + goto out_error_unmap; + } + } + +#ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE + if (!is_early_platform_device(pdev)) { +#endif + sport = bfin_sport_uart_ports[pdev->id]; + sport->port.dev = &pdev->dev; + dev_set_drvdata(&pdev->dev, sport); + ret = uart_add_one_port(&sport_uart_reg, &sport->port); +#ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE + } +#endif + if (!ret) + return 0; + + if (sport) { +out_error_unmap: + iounmap(sport->port.membase); +out_error_free_peripherals: + peripheral_free_list( + (unsigned short *)pdev->dev.platform_data); +out_error_free_mem: + kfree(sport); + bfin_sport_uart_ports[pdev->id] = NULL; + } + + return ret; } -static int sport_uart_remove(struct platform_device *dev) +static int __devexit sport_uart_remove(struct platform_device *pdev) { - struct sport_uart_port *sport = platform_get_drvdata(dev); + struct sport_uart_port *sport = platform_get_drvdata(pdev); - pr_debug("%s enter\n", __func__); - platform_set_drvdata(dev, NULL); + dev_dbg(&pdev->dev, "%s enter\n", __func__); + dev_set_drvdata(&pdev->dev, NULL); - if (sport) + if (sport) { uart_remove_one_port(&sport_uart_reg, &sport->port); + iounmap(sport->port.membase); + peripheral_free_list( + (unsigned short *)pdev->dev.platform_data); + kfree(sport); + bfin_sport_uart_ports[pdev->id] = NULL; + } return 0; } static struct platform_driver sport_uart_driver = { .probe = sport_uart_probe, - .remove = sport_uart_remove, - .suspend = sport_uart_suspend, - .resume = sport_uart_resume, + .remove = __devexit_p(sport_uart_remove), .driver = { .name = DRV_NAME, +#ifdef CONFIG_PM + .pm = &bfin_sport_uart_dev_pm_ops, +#endif }, }; +#ifdef CONFIG_SERIAL_BFIN_SPORT_CONSOLE +static __initdata struct early_platform_driver early_sport_uart_driver = { + .class_str = DRV_NAME, + .pdrv = &sport_uart_driver, + .requested_id = EARLY_PLATFORM_ID_UNSET, +}; + +static int __init sport_uart_rs_console_init(void) +{ + early_platform_driver_register(&early_sport_uart_driver, DRV_NAME); + + early_platform_driver_probe(DRV_NAME, BFIN_SPORT_UART_MAX_PORTS, 0); + + register_console(&sport_uart_console); + + return 0; +} +console_initcall(sport_uart_rs_console_init); +#endif + static int __init sport_uart_init(void) { int ret; - pr_debug("%s enter\n", __func__); + pr_info("Serial: Blackfin uart over sport driver\n"); + ret = uart_register_driver(&sport_uart_reg); - if (ret != 0) { - printk(KERN_ERR "Failed to register %s:%d\n", + if (ret) { + pr_err("failed to register %s:%d\n", sport_uart_reg.driver_name, ret); return ret; } ret = platform_driver_register(&sport_uart_driver); - if (ret != 0) { - printk(KERN_ERR "Failed to register sport uart driver:%d\n", ret); + if (ret) { + pr_err("failed to register sport uart driver:%d\n", ret); uart_unregister_driver(&sport_uart_reg); } - - pr_debug("%s exit\n", __func__); return ret; } +module_init(sport_uart_init); static void __exit sport_uart_exit(void) { - pr_debug("%s enter\n", __func__); platform_driver_unregister(&sport_uart_driver); uart_unregister_driver(&sport_uart_reg); } - -module_init(sport_uart_init); module_exit(sport_uart_exit); +MODULE_AUTHOR("Sonic Zhang, Roy Huang"); +MODULE_DESCRIPTION("Blackfin serial over SPORT driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/serial/bfin_sport_uart.h b/drivers/serial/bfin_sport_uart.h index 671d41cc1a3f..abe03614e4df 100644 --- a/drivers/serial/bfin_sport_uart.h +++ b/drivers/serial/bfin_sport_uart.h @@ -1,29 +1,23 @@ /* - * File: linux/drivers/serial/bfin_sport_uart.h + * Blackfin On-Chip Sport Emulated UART Driver * - * Based on: include/asm-blackfin/mach-533/bfin_serial_5xx.h - * Author: Roy Huang analog.com> + * Copyright 2006-2008 Analog Devices Inc. * - * Created: Nov 22, 2006 - * Copyright: (C) Analog Device Inc. - * Description: this driver enable SPORTs on Blackfin emulate UART. + * Enter bugs at http://blackfin.uclinux.org/ * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ +/* + * This driver and the hardware supported are in term of EE-191 of ADI. + * http://www.analog.com/UploadedFiles/Application_Notes/399447663EE191.pdf + * This application note describe how to implement a UART on a Sharc DSP, + * but this driver is implemented on Blackfin Processor. + * Transmit Frame Sync is not used by this driver to transfer data out. + */ + +#ifndef _BFIN_SPORT_UART_H +#define _BFIN_SPORT_UART_H #define OFFSET_TCR1 0x00 /* Transmit Configuration 1 Register */ #define OFFSET_TCR2 0x04 /* Transmit Configuration 2 Register */ @@ -61,3 +55,7 @@ #define SPORT_PUT_RCLKDIV(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RCLKDIV), v) #define SPORT_PUT_RFSDIV(sport, v) bfin_write16(((sport)->port.membase + OFFSET_RFSDIV), v) #define SPORT_PUT_STAT(sport, v) bfin_write16(((sport)->port.membase + OFFSET_STAT), v) + +#define SPORT_TX_FIFO_SIZE 8 + +#endif /* _BFIN_SPORT_UART_H */ -- cgit v1.2.3 From b5d228cc4f854aebcefac987d111fc072ecd15e0 Mon Sep 17 00:00:00 2001 From: Shmulik Ladkani Date: Wed, 9 Dec 2009 12:31:29 -0800 Subject: serial: copy UART properties of UPF_FIXED_TYPE ports provisioned using early_serial_setup Augment the UPF_FIXED_TYPE logic, which currently applies to UART ports provisioned using platform_device_register. The suggested patch applies same logic into 'serial8250_register_ports', making UART ports provisioned using early_serial_setup inherit their properties from the uart_config entry. Signed-off-by: Shmulik Ladkani Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/serial/8250.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index a81ff7bc5fa1..7c4ebe6ee18b 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -2690,6 +2690,15 @@ static void __init serial8250_isa_init_ports(void) } } +static void +serial8250_init_fixed_type_port(struct uart_8250_port *up, unsigned int type) +{ + up->port.type = type; + up->port.fifosize = uart_config[type].fifo_size; + up->capabilities = uart_config[type].flags; + up->tx_loadsz = uart_config[type].tx_loadsz; +} + static void __init serial8250_register_ports(struct uart_driver *drv, struct device *dev) { @@ -2706,6 +2715,10 @@ serial8250_register_ports(struct uart_driver *drv, struct device *dev) struct uart_8250_port *up = &serial8250_ports[i]; up->port.dev = dev; + + if (up->port.flags & UPF_FIXED_TYPE) + serial8250_init_fixed_type_port(up, up->port.type); + uart_add_one_port(drv, &up->port); } } @@ -3118,12 +3131,8 @@ int serial8250_register_port(struct uart_port *port) if (port->dev) uart->port.dev = port->dev; - if (port->flags & UPF_FIXED_TYPE) { - uart->port.type = port->type; - uart->port.fifosize = uart_config[port->type].fifo_size; - uart->capabilities = uart_config[port->type].flags; - uart->tx_loadsz = uart_config[port->type].tx_loadsz; - } + if (port->flags & UPF_FIXED_TYPE) + serial8250_init_fixed_type_port(uart, port->type); set_io_from_upio(&uart->port); /* Possibly override default I/O functions. */ -- cgit v1.2.3 From 8b505ca8e2600eb9e7dd2d6b2682a81717671374 Mon Sep 17 00:00:00 2001 From: Thiago Farina Date: Wed, 9 Dec 2009 12:31:30 -0800 Subject: serial: 68328serial.c: remove BAUD_TABLE_SIZE macro This macro is a duplicate of ARRAY_SIZE defined in kernel api, so just use that instead. Signed-off-by: Thiago Farina Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/serial/68328serial.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/68328serial.c b/drivers/serial/68328serial.c index d935b2d04f93..ae0251ef6f4e 100644 --- a/drivers/serial/68328serial.c +++ b/drivers/serial/68328serial.c @@ -153,8 +153,6 @@ static int baud_table[] = { 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 0 }; -#define BAUD_TABLE_SIZE (sizeof(baud_table)/sizeof(baud_table[0])) - /* Sets or clears DTR/RTS on the requested line */ static inline void m68k_rtsdtr(struct m68k_serial *ss, int set) { @@ -1406,10 +1404,10 @@ static void m68328_set_baud(void) USTCNT = ustcnt & ~USTCNT_TXEN; again: - for (i = 0; i < sizeof(baud_table) / sizeof(baud_table[0]); i++) + for (i = 0; i < ARRAY_SIZE(baud_table); i++) if (baud_table[i] == m68328_console_baud) break; - if (i >= sizeof(baud_table) / sizeof(baud_table[0])) { + if (i >= ARRAY_SIZE(baud_table)) { m68328_console_baud = 9600; goto again; } @@ -1435,7 +1433,7 @@ int m68328_console_setup(struct console *cp, char *arg) if (arg) n = simple_strtoul(arg,NULL,0); - for (i = 0; i < BAUD_TABLE_SIZE; i++) + for (i = 0; i < ARRAY_SIZE(baud_table); i++) if (baud_table[i] == n) break; if (i < BAUD_TABLE_SIZE) { -- cgit v1.2.3 From 8fe2d54145a51238308d333f9dc57c5df575ff78 Mon Sep 17 00:00:00 2001 From: Albin Tonnerre Date: Wed, 9 Dec 2009 12:31:32 -0800 Subject: serial: atmel_serial: add poll_get_char and poll_put_char uart_ops Permits using KGDB over the console with the atmel_serial driver. [akpm@linux-foundation.org: s/barrier/cpu_relax/] Signed-off-by: Albin Tonnerre Acked-by: Andrew Victor Acked-by: Haavard Skinnemoen Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/serial/atmel_serial.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'drivers/serial') diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c index 9d948bccafaf..2c9bf9b68327 100644 --- a/drivers/serial/atmel_serial.c +++ b/drivers/serial/atmel_serial.c @@ -1213,6 +1213,24 @@ static int atmel_verify_port(struct uart_port *port, struct serial_struct *ser) return ret; } +#ifdef CONFIG_CONSOLE_POLL +static int atmel_poll_get_char(struct uart_port *port) +{ + while (!(UART_GET_CSR(port) & ATMEL_US_RXRDY)) + cpu_relax(); + + return UART_GET_CHAR(port); +} + +static void atmel_poll_put_char(struct uart_port *port, unsigned char ch) +{ + while (!(UART_GET_CSR(port) & ATMEL_US_TXRDY)) + cpu_relax(); + + UART_PUT_CHAR(port, ch); +} +#endif + static struct uart_ops atmel_pops = { .tx_empty = atmel_tx_empty, .set_mctrl = atmel_set_mctrl, @@ -1232,6 +1250,10 @@ static struct uart_ops atmel_pops = { .config_port = atmel_config_port, .verify_port = atmel_verify_port, .pm = atmel_serial_pm, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = atmel_poll_get_char, + .poll_put_char = atmel_poll_put_char, +#endif }; /* -- cgit v1.2.3 From ac6ec5b1de5d1d5afcbe88d73c05df71dca0ac39 Mon Sep 17 00:00:00 2001 From: "Ira W. Snyder" Date: Mon, 21 Dec 2009 16:26:45 -0800 Subject: serial: 8250_pci: add support for MCS9865 / SYBA 6x Serial Port Card This patch is heavily based on an earlier patch found on the linux-serial mailing list [1], written by Darius Augulis. The previous incarnation of this patch only supported a 2x serial port card. I have added support for my SYBA 6x serial port card, and tested on x86. [1]: http://marc.info/?l=linux-serial&m=124975806304760 Signed-off-by: Ira W. Snyder Cc: Darius Augulis Cc: Greg KH Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/parport/parport_pc.c | 6 ++++++ drivers/serial/8250_pci.c | 22 +++++++++++++++++++++- include/linux/pci_ids.h | 1 + 3 files changed, 28 insertions(+), 1 deletion(-) (limited to 'drivers/serial') diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c index ad113b0f62db..0950fa40684f 100644 --- a/drivers/parport/parport_pc.c +++ b/drivers/parport/parport_pc.c @@ -2908,6 +2908,7 @@ enum parport_pc_pci_cards { netmos_9805, netmos_9815, netmos_9901, + netmos_9865, quatech_sppxp100, }; @@ -2989,6 +2990,7 @@ static struct parport_pc_pci { /* netmos_9805 */ { 1, { { 0, -1 }, } }, /* netmos_9815 */ { 2, { { 0, -1 }, { 2, -1 }, } }, /* netmos_9901 */ { 1, { { 0, -1 }, } }, + /* netmos_9865 */ { 1, { { 0, -1 }, } }, /* quatech_sppxp100 */ { 1, { { 0, 1 }, } }, }; @@ -3092,6 +3094,10 @@ static const struct pci_device_id parport_pc_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9815 }, { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901, 0xA000, 0x2000, 0, 0, netmos_9901 }, + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, + 0xA000, 0x1000, 0, 0, netmos_9865 }, + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, + 0xA000, 0x2000, 0, 0, netmos_9865 }, /* Quatech SPPXP-100 Parallel port PCI ExpressCard */ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SPPXP_100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, quatech_sppxp100 }, diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index b28af13c45a1..8b18c3ce3898 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -760,7 +760,8 @@ static int pci_netmos_init(struct pci_dev *dev) /* subdevice 0x00PS means

parallel, serial */ unsigned int num_serial = dev->subsystem_device & 0xf; - if (dev->device == PCI_DEVICE_ID_NETMOS_9901) + if ((dev->device == PCI_DEVICE_ID_NETMOS_9901) || + (dev->device == PCI_DEVICE_ID_NETMOS_9865)) return 0; if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM && dev->subsystem_device == 0x0299) @@ -1479,6 +1480,7 @@ enum pci_board_num_t { pbn_b0_bt_1_115200, pbn_b0_bt_2_115200, + pbn_b0_bt_4_115200, pbn_b0_bt_8_115200, pbn_b0_bt_1_460800, @@ -1703,6 +1705,12 @@ static struct pciserial_board pci_boards[] __devinitdata = { .base_baud = 115200, .uart_offset = 8, }, + [pbn_b0_bt_4_115200] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, [pbn_b0_bt_8_115200] = { .flags = FL_BASE0|FL_BASE_BARS, .num_ports = 8, @@ -3648,6 +3656,18 @@ static struct pci_device_id serial_pci_tbl[] = { 0xA000, 0x1000, 0, 0, pbn_b0_1_115200 }, + /* + * Best Connectivity PCI Multi I/O cards + */ + + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, + 0xA000, 0x1000, + 0, 0, pbn_b0_1_115200 }, + + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865, + 0xA000, 0x3004, + 0, 0, pbn_b0_bt_4_115200 }, + /* * These entries match devices with class COMMUNICATION_SERIAL, * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 0be824320580..3ec4003f5e64 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2697,6 +2697,7 @@ #define PCI_DEVICE_ID_NETMOS_9835 0x9835 #define PCI_DEVICE_ID_NETMOS_9845 0x9845 #define PCI_DEVICE_ID_NETMOS_9855 0x9855 +#define PCI_DEVICE_ID_NETMOS_9865 0x9865 #define PCI_DEVICE_ID_NETMOS_9901 0x9901 #define PCI_VENDOR_ID_3COM_2 0xa727 -- cgit v1.2.3 From bbcd18d1b37413d25eaf4580682b1b8e4a09ff5e Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Mon, 21 Dec 2009 16:26:46 -0800 Subject: serial: imx: fix NULL dereference Oops when pdata == NULL MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The platform code doesn't have to provide platform data to get sensible default behaviour from the imx serial driver. This patch does not handle NULL dereference in the IrDA case, which still requires a valid platform data pointer (in imx_startup()/imx_shutdown()), since I don't know whether there is a sensible default behaviour, or should the operation just fail cleanly. Signed-off-by: Baruch Siach Cc: Baruch Siach Cc: Alan Cox Cc: Sascha Hauer Cc: Oskar Schirmer Cc: Fabian Godehardt Cc: Daniel Glöckner Cc: stable Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/serial/imx.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 60d665a17a88..d00fcf8e6c70 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -1279,7 +1279,7 @@ static int serial_imx_probe(struct platform_device *pdev) sport->use_irda = 1; #endif - if (pdata->init) { + if (pdata && pdata->init) { ret = pdata->init(pdev); if (ret) goto clkput; @@ -1292,7 +1292,7 @@ static int serial_imx_probe(struct platform_device *pdev) return 0; deinit: - if (pdata->exit) + if (pdata && pdata->exit) pdata->exit(pdev); clkput: clk_put(sport->clk); @@ -1321,7 +1321,7 @@ static int serial_imx_remove(struct platform_device *pdev) clk_disable(sport->clk); - if (pdata->exit) + if (pdata && pdata->exit) pdata->exit(pdev); iounmap(sport->port.membase); -- cgit v1.2.3 From 2a52fcb54fdf4b557730022aefcc794d567591fb Mon Sep 17 00:00:00 2001 From: Kiros Yeh Date: Mon, 21 Dec 2009 16:26:48 -0800 Subject: serial: add support for Korenix JetCard Add different model (with a different PCI ID) to support Korenix JetCard. Signed-off-by: Kiros Yeh Acked-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/serial/8250_pci.c | 9 +++++++++ include/linux/pci_ids.h | 2 ++ 2 files changed, 11 insertions(+) (limited to 'drivers/serial') diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index 8b18c3ce3898..01c012da4e26 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -3199,6 +3199,15 @@ static struct pci_device_id serial_pci_tbl[] = { 0x1208, 0x0004, 0, 0, pbn_b0_4_921600 }, + { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF2, + 0x1204, 0x0004, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF2, + 0x1208, 0x0004, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_KORENIX, PCI_DEVICE_ID_KORENIX_JETCARDF3, + 0x1208, 0x0004, 0, 0, + pbn_b0_4_921600 }, /* * Dell Remote Access Card 4 - Tim_T_Murphy@Dell.com */ diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 3ec4003f5e64..e91b1fc03e7a 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2333,6 +2333,8 @@ #define PCI_VENDOR_ID_KORENIX 0x1982 #define PCI_DEVICE_ID_KORENIX_JETCARDF0 0x1600 #define PCI_DEVICE_ID_KORENIX_JETCARDF1 0x16ff +#define PCI_DEVICE_ID_KORENIX_JETCARDF2 0x1700 +#define PCI_DEVICE_ID_KORENIX_JETCARDF3 0x17ff #define PCI_VENDOR_ID_QMI 0x1a32 -- cgit v1.2.3 From 1e091751cdb2c28f9f25041be0dcb4d33e4a833d Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Mon, 21 Dec 2009 16:26:49 -0800 Subject: serial: fix test of unsigned The variables were unsigned so the tests did not work. Signed-off-by: Roel Kluin Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/serial/msm_serial.c | 6 ++++-- drivers/serial/timbuart.c | 7 ++++--- 2 files changed, 8 insertions(+), 5 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/msm_serial.c b/drivers/serial/msm_serial.c index b05c5aa02cb4..ecdc0facf7ee 100644 --- a/drivers/serial/msm_serial.c +++ b/drivers/serial/msm_serial.c @@ -691,6 +691,7 @@ static int __init msm_serial_probe(struct platform_device *pdev) struct msm_port *msm_port; struct resource *resource; struct uart_port *port; + int irq; if (unlikely(pdev->id < 0 || pdev->id >= UART_NR)) return -ENXIO; @@ -711,9 +712,10 @@ static int __init msm_serial_probe(struct platform_device *pdev) return -ENXIO; port->mapbase = resource->start; - port->irq = platform_get_irq(pdev, 0); - if (unlikely(port->irq < 0)) + irq = platform_get_irq(pdev, 0); + if (unlikely(irq < 0)) return -ENXIO; + port->irq = irq; platform_set_drvdata(pdev, port); diff --git a/drivers/serial/timbuart.c b/drivers/serial/timbuart.c index 34b31da01d09..7bf10264a6ac 100644 --- a/drivers/serial/timbuart.c +++ b/drivers/serial/timbuart.c @@ -421,7 +421,7 @@ static struct uart_driver timbuart_driver = { static int timbuart_probe(struct platform_device *dev) { - int err; + int err, irq; struct timbuart_port *uart; struct resource *iomem; @@ -453,11 +453,12 @@ static int timbuart_probe(struct platform_device *dev) uart->port.mapbase = iomem->start; uart->port.membase = NULL; - uart->port.irq = platform_get_irq(dev, 0); - if (uart->port.irq < 0) { + irq = platform_get_irq(dev, 0); + if (irq < 0) { err = -EINVAL; goto err_register; } + uart->port.irq = irq; tasklet_init(&uart->tasklet, timbuart_tasklet, (unsigned long)uart); -- cgit v1.2.3 From e6c4ef984ebbd1a0458503417da91f3de47cbbe0 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 13 Jan 2010 23:34:18 +0000 Subject: tty: declare MODULE_FIRMWARE in various drivers Signed-off-by: Ben Hutchings Signed-off-by: Greg Kroah-Hartman --- drivers/char/cyclades.c | 1 + drivers/char/ip2/ip2main.c | 2 ++ drivers/char/isicom.c | 5 +++++ drivers/char/moxa.c | 3 +++ drivers/serial/icom.c | 4 +++- drivers/usb/serial/keyspan_pda.c | 7 +++++++ 6 files changed, 21 insertions(+), 1 deletion(-) (limited to 'drivers/serial') diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c index e026f2447923..b861c08263a4 100644 --- a/drivers/char/cyclades.c +++ b/drivers/char/cyclades.c @@ -4195,3 +4195,4 @@ module_exit(cy_cleanup_module); MODULE_LICENSE("GPL"); MODULE_VERSION(CY_VERSION); MODULE_ALIAS_CHARDEV_MAJOR(CYCLADES_MAJOR); +MODULE_FIRMWARE("cyzfirm.bin"); diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c index c2c915a97667..911e1da6def2 100644 --- a/drivers/char/ip2/ip2main.c +++ b/drivers/char/ip2/ip2main.c @@ -3209,3 +3209,5 @@ static struct pci_device_id ip2main_pci_tbl[] __devinitdata = { }; MODULE_DEVICE_TABLE(pci, ip2main_pci_tbl); + +MODULE_FIRMWARE("intelliport2.bin"); diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c index 77d5a29ce80e..be2e8f9a27c3 100644 --- a/drivers/char/isicom.c +++ b/drivers/char/isicom.c @@ -1720,3 +1720,8 @@ module_exit(isicom_exit); MODULE_AUTHOR("MultiTech"); MODULE_DESCRIPTION("Driver for the ISI series of cards by MultiTech"); MODULE_LICENSE("GPL"); +MODULE_FIRMWARE("isi608.bin"); +MODULE_FIRMWARE("isi608em.bin"); +MODULE_FIRMWARE("isi616em.bin"); +MODULE_FIRMWARE("isi4608.bin"); +MODULE_FIRMWARE("isi4616.bin"); diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c index 49a1fc2ec6f2..166495d6a1d7 100644 --- a/drivers/char/moxa.c +++ b/drivers/char/moxa.c @@ -172,6 +172,9 @@ static unsigned int numports[MAX_BOARDS]; MODULE_AUTHOR("William Chen"); MODULE_DESCRIPTION("MOXA Intellio Family Multiport Board Device Driver"); MODULE_LICENSE("GPL"); +MODULE_FIRMWARE("c218tunx.cod"); +MODULE_FIRMWARE("cp204unx.cod"); +MODULE_FIRMWARE("c320tunx.cod"); module_param_array(type, uint, NULL, 0); MODULE_PARM_DESC(type, "card type: C218=2, C320=4"); diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c index 0028b6f89ce6..6e715b78d7a6 100644 --- a/drivers/serial/icom.c +++ b/drivers/serial/icom.c @@ -1654,4 +1654,6 @@ MODULE_DESCRIPTION("IBM iSeries Serial IOA driver"); MODULE_SUPPORTED_DEVICE ("IBM iSeries 2745, 2771, 2772, 2742, 2793 and 2805 Communications adapters"); MODULE_LICENSE("GPL"); - +MODULE_FIRMWARE("icom_call_setup.bin"); +MODULE_FIRMWARE("icom_res_dce.bin"); +MODULE_FIRMWARE("icom_asc.bin"); diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index 1296a097f5c3..84f08e968e0b 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -789,6 +789,13 @@ static int keyspan_pda_fake_startup(struct usb_serial *serial) return 1; } +#ifdef KEYSPAN +MODULE_FIRMWARE("keyspan_pda/keyspan_pda.fw"); +#endif +#ifdef XIRCOM +MODULE_FIRMWARE("keyspan_pda/xircom_pgs.fw"); +#endif + static int keyspan_pda_startup(struct usb_serial *serial) { -- cgit v1.2.3 From b2ced4f69ea87399a37b4485280c52034a0161a8 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Tue, 19 Jan 2010 06:13:10 -0500 Subject: serial: bfin_5xx: remove useless gpio handling with hard flow control For UARTs that have dedicated hardware flow control support, there will be no gpios to request/free as they are part of the normal peripheral pins. Signed-off-by: Sonic Zhang Signed-off-by: Mike Frysinger Signed-off-by: Greg Kroah-Hartman --- drivers/serial/bfin_5xx.c | 16 +--------------- 1 file changed, 1 insertion(+), 15 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 50abb7e557f4..15843cceb9fc 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -746,15 +746,6 @@ static int bfin_serial_startup(struct uart_port *port) Status interrupt.\n"); } - if (uart->cts_pin >= 0) { - gpio_request(uart->cts_pin, DRIVER_NAME); - gpio_direction_output(uart->cts_pin, 1); - } - if (uart->rts_pin >= 0) { - gpio_request(uart->rts_pin, DRIVER_NAME); - gpio_direction_output(uart->rts_pin, 0); - } - /* CTS RTS PINs are negative assertive. */ UART_PUT_MCR(uart, ACTS); UART_SET_IER(uart, EDSSI); @@ -801,10 +792,6 @@ static void bfin_serial_shutdown(struct uart_port *port) gpio_free(uart->rts_pin); #endif #ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS - if (uart->cts_pin >= 0) - gpio_free(uart->cts_pin); - if (uart->rts_pin >= 0) - gpio_free(uart->rts_pin); if (UART_GET_IER(uart) && EDSSI) free_irq(uart->status_irq, uart); #endif @@ -1409,8 +1396,7 @@ static int bfin_serial_remove(struct platform_device *dev) continue; uart_remove_one_port(&bfin_serial_reg, &bfin_serial_ports[i].port); bfin_serial_ports[i].port.dev = NULL; -#if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \ - defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS) +#if defined(CONFIG_SERIAL_BFIN_CTSRTS) gpio_free(bfin_serial_ports[i].cts_pin); gpio_free(bfin_serial_ports[i].rts_pin); #endif -- cgit v1.2.3 From 7ed43f6af88b042eb2ac5a3eda1e8e17efae74ee Mon Sep 17 00:00:00 2001 From: Graf Yang Date: Tue, 19 Jan 2010 06:13:11 -0500 Subject: serial: bfin_5xx: need to disable DMA TX interrupt too If we don't disable the DMA TX channel, an inopportune timeout will trigger the interrupt handler and may cause a dead lock with the spin_lock. Signed-off-by: Graf Yang Signed-off-by: Mike Frysinger Signed-off-by: Greg Kroah-Hartman --- drivers/serial/bfin_5xx.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/serial') diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 15843cceb9fc..b5a9b374dad5 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -488,6 +488,7 @@ void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart) { int x_pos, pos; + dma_disable_irq(uart->tx_dma_channel); dma_disable_irq(uart->rx_dma_channel); spin_lock_bh(&uart->port.lock); @@ -521,6 +522,7 @@ void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart) } spin_unlock_bh(&uart->port.lock); + dma_enable_irq(uart->tx_dma_channel); dma_enable_irq(uart->rx_dma_channel); mod_timer(&(uart->rx_dma_timer), jiffies + DMA_RX_FLUSH_JIFFIES); -- cgit v1.2.3 From cdc592d5d496e5c813d9632d0d1e334658927af7 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Tue, 19 Jan 2010 06:13:12 -0500 Subject: serial: bfin_5xx: kgdboc should accept gdb break only when it is active If we always check for gdb breaks even when it isn't active, we get false positives on normal code and the system panics. URL: http://blackfin.uclinux.org/gf/tracker/5277 Signed-off-by: Sonic Zhang Signed-off-by: Mike Frysinger Signed-off-by: Greg Kroah-Hartman --- drivers/serial/bfin_5xx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/serial') diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index b5a9b374dad5..6b8795557b38 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -237,7 +237,8 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart) #if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) - if (kgdb_connected && kgdboc_port_line == uart->port.line) + if (kgdb_connected && kgdboc_port_line == uart->port.line + && kgdboc_break_enabled) if (ch == 0x3) {/* Ctrl + C */ kgdb_breakpoint(); return; -- cgit v1.2.3 From 599b714ce1ff578f0ff2bc1441122be87c0fa478 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 19 Jan 2010 06:13:13 -0500 Subject: serial: bfin_5xx: pull in linux/io.h for ioremap prototypes Signed-off-by: Mike Frysinger Signed-off-by: Greg Kroah-Hartman --- drivers/serial/bfin_5xx.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/serial') diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 6b8795557b38..fcf273e3f48c 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -14,6 +14,7 @@ #include #include +#include #include #include #include -- cgit v1.2.3 From a6d07d14bb5cc83237fb259014c1787ffdb83ccb Mon Sep 17 00:00:00 2001 From: Maxime Bizon Date: Sat, 30 Jan 2010 18:42:56 +0100 Subject: serial: bcm63xx_uart: don't use kfree() on non kmalloced area. Signed-off-by: Maxime Bizon Signed-off-by: Greg Kroah-Hartman --- drivers/serial/bcm63xx_uart.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/serial') diff --git a/drivers/serial/bcm63xx_uart.c b/drivers/serial/bcm63xx_uart.c index 37ad0c449937..f78ede824104 100644 --- a/drivers/serial/bcm63xx_uart.c +++ b/drivers/serial/bcm63xx_uart.c @@ -830,7 +830,7 @@ static int __devinit bcm_uart_probe(struct platform_device *pdev) ret = uart_add_one_port(&bcm_uart_driver, port); if (ret) { - kfree(port); + ports[pdev->id].membase = 0; return ret; } platform_set_drvdata(pdev, port); -- cgit v1.2.3 From 6a2c7eabfd09ca7986bf96b8958a87ca041a19d8 Mon Sep 17 00:00:00 2001 From: Maxime Bizon Date: Sat, 30 Jan 2010 18:42:57 +0100 Subject: serial: bcm63xx_uart: allow more than one uart to be registered. The bcm6358 CPU has two uarts, make it possible to use the second one. Signed-off-by: Maxime Bizon Signed-off-by: Greg Kroah-Hartman --- drivers/serial/bcm63xx_uart.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/bcm63xx_uart.c b/drivers/serial/bcm63xx_uart.c index f78ede824104..a1a0e55d0807 100644 --- a/drivers/serial/bcm63xx_uart.c +++ b/drivers/serial/bcm63xx_uart.c @@ -35,7 +35,7 @@ #include #include -#define BCM63XX_NR_UARTS 1 +#define BCM63XX_NR_UARTS 2 static struct uart_port ports[BCM63XX_NR_UARTS]; @@ -784,7 +784,7 @@ static struct uart_driver bcm_uart_driver = { .dev_name = "ttyS", .major = TTY_MAJOR, .minor = 64, - .nr = 1, + .nr = BCM63XX_NR_UARTS, .cons = BCM63XX_CONSOLE, }; @@ -826,6 +826,7 @@ static int __devinit bcm_uart_probe(struct platform_device *pdev) port->dev = &pdev->dev; port->fifosize = 16; port->uartclk = clk_get_rate(clk) / 2; + port->line = pdev->id; clk_put(clk); ret = uart_add_one_port(&bcm_uart_driver, port); -- cgit v1.2.3 From 97c22394bb5dc89683ac150f1003d47e6e9418d9 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 8 Feb 2010 10:03:58 +0000 Subject: serial: timberdale: Remove dependancies MFD_TIMBERDALE doesn't appear to be defined anywhere. However the code in question can build happily without platform specifics so remove the check Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/serial/Kconfig | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/serial') diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index cb935b1f4f6c..746e07033dce 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -1449,7 +1449,6 @@ config SERIAL_BFIN_SPORT3_UART config SERIAL_TIMBERDALE tristate "Support for timberdale UART" - depends on MFD_TIMBERDALE select SERIAL_CORE ---help--- Add support for UART controller on timberdale. -- cgit v1.2.3 From 4165fe4ef7305609a96c7f248cefb9c414d0ede5 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 17 Feb 2010 13:07:13 +0000 Subject: tty: Fix up char drivers request_room usage We can't change them all but quite a few misuse it. Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/char/nozomi.c | 2 -- drivers/char/serial167.c | 3 +-- drivers/char/specialix.c | 2 -- drivers/serial/icom.c | 1 - drivers/serial/ioc3_serial.c | 3 +-- 5 files changed, 2 insertions(+), 9 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c index 584910ff725e..a3f32a15fde4 100644 --- a/drivers/char/nozomi.c +++ b/drivers/char/nozomi.c @@ -853,8 +853,6 @@ static int receive_data(enum port_type index, struct nozomi *dc) goto put; } - tty_buffer_request_room(tty, size); - while (size > 0) { read_mem32((u32 *) buf, addr + offset, RECEIVE_BUF_MAX); diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c index 452370af95de..986aa606a6b6 100644 --- a/drivers/char/serial167.c +++ b/drivers/char/serial167.c @@ -658,8 +658,7 @@ static irqreturn_t cd2401_rx_interrupt(int irq, void *dev_id) info->mon.char_max = char_count; info->mon.char_last = char_count; #endif - len = tty_buffer_request_room(tty, char_count); - while (len--) { + while (char_count--) { data = base_addr[CyRDR]; tty_insert_flip_char(tty, data, TTY_NORMAL); #ifdef CYCLOM_16Y_HACK diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c index 268e17f9ec3f..07ac14d949ce 100644 --- a/drivers/char/specialix.c +++ b/drivers/char/specialix.c @@ -646,8 +646,6 @@ static void sx_receive(struct specialix_board *bp) dprintk(SX_DEBUG_RX, "port: %p: count: %d\n", port, count); port->hits[count > 8 ? 9 : count]++; - tty_buffer_request_room(tty, count); - while (count--) tty_insert_flip_char(tty, sx_in(bp, CD186x_RDR), TTY_NORMAL); tty_flip_buffer_push(tty); diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c index 6e715b78d7a6..53a468227056 100644 --- a/drivers/serial/icom.c +++ b/drivers/serial/icom.c @@ -751,7 +751,6 @@ static void recv_interrupt(u16 port_int_reg, struct icom_port *icom_port) trace(icom_port, "FID_STATUS", status); count = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].leLength); - count = tty_buffer_request_room(tty, count); trace(icom_port, "RCV_COUNT", count); trace(icom_port, "REAL_COUNT", count); diff --git a/drivers/serial/ioc3_serial.c b/drivers/serial/ioc3_serial.c index 85dc0410ac1a..23ba6b40b3ac 100644 --- a/drivers/serial/ioc3_serial.c +++ b/drivers/serial/ioc3_serial.c @@ -1411,8 +1411,7 @@ static int receive_chars(struct uart_port *the_port) read_count = do_read(the_port, ch, MAX_CHARS); if (read_count > 0) { flip = 1; - read_room = tty_buffer_request_room(tty, read_count); - tty_insert_flip_string(tty, ch, read_room); + read_room = tty_insert_flip_string(tty, ch, read_count); the_port->icount.rx += read_count; } spin_unlock_irqrestore(&the_port->lock, pflags); -- cgit v1.2.3 From 54862ee005943d0fdb13d4e54220f234676e05f5 Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Thu, 25 Feb 2010 15:31:49 -0300 Subject: jsm: removing the uart structure and filename on error If jsm fails to load, then remove the uart stuff, otherwise, the things (as files), will be there forever (even when the module is unloaded). If you try to reload the module, the following message appears: kobject_add_internal failed for ttyn1 with -EEXIST, don't try to register things with the same name in the same directory. This patch remove the uart things when the driver fails. Signed-off-by: Breno Leitao Signed-off-by: Greg Kroah-Hartman --- drivers/serial/jsm/jsm_driver.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/serial') diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c index 108c3e0471fd..12cb5e446a4f 100644 --- a/drivers/serial/jsm/jsm_driver.c +++ b/drivers/serial/jsm/jsm_driver.c @@ -179,6 +179,7 @@ static int __devinit jsm_probe_one(struct pci_dev *pdev, const struct pci_device return 0; out_free_irq: + jsm_remove_uart_port(brd); free_irq(brd->irq, brd); out_iounmap: iounmap(brd->re_map_membase); -- cgit v1.2.3 From 137ee2f5d173a0e859e35bfb900261418eb88ace Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Thu, 25 Feb 2010 15:31:50 -0300 Subject: jsm: fixing error if the driver fails to load Currently if the driver fails to register on port, the kernel crashes with the following stack: cpu 0x1: Vector: 300 (Data Access) at [c0000000e0303090] pc: c00000000039aa74: .__mutex_lock_slowpath+0x44/0x10c lr: c00000000039aa58: .__mutex_lock_slowpath+0x28/0x10c [c0000000e03033c0] c00000000026b074 .uart_remove_one_port+0xbc/0x16c [c0000000e0303460] d0000000000e0554 .jsm_remove_uart_port+0x8c/0x10c [jsm] [c0000000e03034f0] d0000000000dc034 .jsm_remove_one+0x34/0x108 [jsm] [c0000000e0303590] c0000000001f4aa0 .pci_device_remove+0x48/0x74 ... This patch just fixes the code flow to abort the load when an error is detected. Signed-off-by: Breno Leitao Signed-off-by: Greg Kroah-Hartman --- drivers/serial/jsm/jsm_tty.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c index cd95e215550d..5673ca9dfdc8 100644 --- a/drivers/serial/jsm/jsm_tty.c +++ b/drivers/serial/jsm/jsm_tty.c @@ -432,7 +432,7 @@ int __devinit jsm_tty_init(struct jsm_board *brd) int jsm_uart_port_init(struct jsm_board *brd) { - int i; + int i, rc; unsigned int line; struct jsm_channel *ch; @@ -467,8 +467,11 @@ int jsm_uart_port_init(struct jsm_board *brd) } else set_bit(line, linemap); brd->channels[i]->uart_port.line = line; - if (uart_add_one_port (&jsm_uart_driver, &brd->channels[i]->uart_port)) - printk(KERN_INFO "jsm: add device failed\n"); + rc = uart_add_one_port (&jsm_uart_driver, &brd->channels[i]->uart_port); + if (rc){ + printk(KERN_INFO "jsm: Port %d failed. Aborting...\n", i); + return rc; + } else printk(KERN_INFO "jsm: Port %d added\n", i); } -- cgit v1.2.3