From 21d7f67700ad7a4523d35d43ce95755e40eae5b7 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Mon, 26 Nov 2007 11:54:51 -0800 Subject: skge: fiber link up/down fix The driver would not work over fibre if other end when down then came back up (would require reloading driver). The correct way to manage the link the same way for both TP and fibre. Resloves problem described in: http://lkml.org/lkml/2007/11/6/395 Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/skge.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/skge.c b/drivers/net/skge.c index b680cb08e9ce..73a424694ac5 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -1095,16 +1095,9 @@ static void xm_link_down(struct skge_hw *hw, int port) { struct net_device *dev = hw->dev[port]; struct skge_port *skge = netdev_priv(dev); - u16 cmd = xm_read16(hw, port, XM_MMU_CMD); xm_write16(hw, port, XM_IMSK, XM_IMSK_DISABLE); - cmd &= ~(XM_MMU_ENA_RX | XM_MMU_ENA_TX); - xm_write16(hw, port, XM_MMU_CMD, cmd); - - /* dummy read to ensure writing */ - xm_read16(hw, port, XM_MMU_CMD); - if (netif_carrier_ok(dev)) skge_link_down(skge); } @@ -1194,6 +1187,7 @@ static void genesis_init(struct skge_hw *hw) static void genesis_reset(struct skge_hw *hw, int port) { const u8 zero[8] = { 0 }; + u32 reg; skge_write8(hw, SK_REG(port, GMAC_IRQ_MSK), 0); @@ -1209,6 +1203,11 @@ static void genesis_reset(struct skge_hw *hw, int port) xm_write16(hw, port, PHY_BCOM_INT_MASK, 0xffff); xm_outhash(hw, port, XM_HSM, zero); + + /* Flush TX and RX fifo */ + reg = xm_read32(hw, port, XM_MODE); + xm_write32(hw, port, XM_MODE, reg | XM_MD_FTF); + xm_write32(hw, port, XM_MODE, reg | XM_MD_FRF); } @@ -1714,6 +1713,12 @@ static void genesis_stop(struct skge_port *skge) struct skge_hw *hw = skge->hw; int port = skge->port; unsigned retries = 1000; + u16 cmd; + + /* Disable Tx and Rx */ + cmd = xm_read16(hw, port, XM_MMU_CMD); + cmd &= ~(XM_MMU_ENA_RX | XM_MMU_ENA_TX); + xm_write16(hw, port, XM_MMU_CMD, cmd); genesis_reset(hw, port); -- cgit v1.2.3