From 119fc60a2d20b63439fdae99f0c7022d3dd99def Mon Sep 17 00:00:00 2001 From: Mallikarjuna R Chilakala Date: Thu, 20 May 2010 23:07:06 -0700 Subject: ixgbe:add support for a new 82599 10G Base-T device This adds support for a new copper device for 82599, device id 0x151c. This 82599 10GBase-T device uses the PHY's internal temperature sensor to guard against over-temp conditions. In this scenario the PHY will be put in a low power mode and link will no longer be able to transmit or receive any data. When this occurs, the over-temp interrupt is latched and driver logs this error message. A HW reset or power cycle is required to clear this status. Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_82598.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net/ixgbe/ixgbe_82598.c') diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c index f2b7ff44215b..9c02d6014cc4 100644 --- a/drivers/net/ixgbe/ixgbe_82598.c +++ b/drivers/net/ixgbe/ixgbe_82598.c @@ -1236,6 +1236,7 @@ static struct ixgbe_phy_operations phy_ops_82598 = { .setup_link = &ixgbe_setup_phy_link_generic, .setup_link_speed = &ixgbe_setup_phy_link_speed_generic, .read_i2c_eeprom = &ixgbe_read_i2c_eeprom_82598, + .check_overtemp = &ixgbe_tn_check_overtemp, }; struct ixgbe_info ixgbe_82598_info = { -- cgit v1.2.3