From 8d79898897f8afee182febef18b96f559d32ebc4 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Sat, 9 Aug 2008 12:23:15 -0300 Subject: V4L/DVB (8654): cxusb: add support for DViCO FusionHDTV DVB-T Dual Digital 4 (rev 2) Add support for revision 2 of the DViCO FusionHDTV DVB-T Dual Digital 4 which has new tuners and demodulators (2 x DIB7070p). With this patch both DVB reception and IR works. The dib7000p driver currently hardwires the output mode to OUTMODE_MPEG2_SERIAL regardless of what we ask for. Modify it to allow OUTMODE_MPEG2_PAR_GATED_CLK to be set. Longer term we should remove the check completely and set the output mode correctly in all the callers. Add Kconfig bits to ensure the dib7000p and dib0070 modules are enabled. It would be nice to only do this for the !DVB_FE_CUSTOMISE case, but this is what the other DIB7070 module does (there are a number of module dependencies in the attach code). Signed-off-by: Anton Blanchard Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/dvb-usb-ids.h | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/media/dvb/dvb-usb/dvb-usb-ids.h') diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index 03dfb9f2fe30..f327a154b6c6 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -171,6 +171,7 @@ #define USB_PID_DVICO_BLUEBIRD_DUAL_2_COLD 0xdb58 #define USB_PID_DVICO_BLUEBIRD_DUAL_2_WARM 0xdb59 #define USB_PID_DVICO_BLUEBIRD_DUAL_4 0xdb78 +#define USB_PID_DVICO_BLUEBIRD_DUAL_4_REV_2 0xdb98 #define USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2 0xdb70 #define USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2_NFW_WARM 0xdb71 #define USB_PID_DIGITALNOW_BLUEBIRD_DUAL_1_COLD 0xdb54 -- cgit v1.2.3 From dfbdce04905d3196c828ca36f01ef06e6fdb2428 Mon Sep 17 00:00:00 2001 From: Timothy Lee Date: Sat, 9 Aug 2008 13:36:51 -0300 Subject: V4L/DVB (8657): cxusb: add lgs8gl5 and support for Magic-Pro DMB-TH usb stick Add support for Magic-Pro DMB-TH usb stick. DMB-TH is the HDTV broadcast standard used in Hong Kong and China. [...] I've also attached a second patch against the dvb-apps repository which adds a DMB-TH scan file for Hong Kong. Since the ProHDTV stick contains a DMB-TH decoder (lgs8gl5) onboard, it outputs MPEG-TS to the PC. Signed-off-by: Timothy Lee Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/cxusb.c | 286 +++++++++++++++++++ drivers/media/dvb/dvb-usb/dvb-usb-ids.h | 2 + drivers/media/dvb/frontends/Kconfig | 7 + drivers/media/dvb/frontends/Makefile | 1 + drivers/media/dvb/frontends/lgs8gl5.c | 480 ++++++++++++++++++++++++++++++++ drivers/media/dvb/frontends/lgs8gl5.h | 45 +++ 6 files changed, 821 insertions(+) create mode 100644 drivers/media/dvb/frontends/lgs8gl5.c create mode 100644 drivers/media/dvb/frontends/lgs8gl5.h (limited to 'drivers/media/dvb/dvb-usb/dvb-usb-ids.h') diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c index 338c819ca739..bffb44380389 100644 --- a/drivers/media/dvb/dvb-usb/cxusb.c +++ b/drivers/media/dvb/dvb-usb/cxusb.c @@ -38,6 +38,7 @@ #include "mxl5005s.h" #include "dib7000p.h" #include "dib0070.h" +#include "lgs8gl5.h" /* debug */ static int dvb_usb_cxusb_debug; @@ -111,6 +112,25 @@ static void cxusb_nano2_led(struct dvb_usb_device *d, int onoff) cxusb_bluebird_gpio_rw(d, 0x40, onoff ? 0 : 0x40); } +static int cxusb_d680_dmb_gpio_tuner(struct dvb_usb_device *d, + u8 addr, int onoff) +{ + u8 o[2] = {addr, onoff}; + u8 i; + int rc; + + rc = cxusb_ctrl_msg(d, CMD_GPIO_WRITE, o, 2, &i, 1); + + if (rc < 0) + return rc; + if (i == 0x01) + return 0; + else { + deb_info("gpio_write failed.\n"); + return -EIO; + } +} + /* I2C */ static int cxusb_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num) @@ -264,6 +284,20 @@ static int cxusb_nano2_power_ctrl(struct dvb_usb_device *d, int onoff) return rc; } +static int cxusb_d680_dmb_power_ctrl(struct dvb_usb_device *d, int onoff) +{ + int ret; + u8 b; + ret = cxusb_power_ctrl(d, onoff); + if (!onoff) + return ret; + + msleep(128); + cxusb_ctrl_msg(d, CMD_DIGITAL, NULL, 0, &b, 1); + msleep(100); + return ret; +} + static int cxusb_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) { u8 buf[2] = { 0x03, 0x00 }; @@ -285,6 +319,67 @@ static int cxusb_aver_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) return 0; } +static void cxusb_d680_dmb_drain_message(struct dvb_usb_device *d) +{ + int ep = d->props.generic_bulk_ctrl_endpoint; + const int timeout = 100; + const int junk_len = 32; + u8 *junk; + int rd_count; + + /* Discard remaining data in video pipe */ + junk = kmalloc(junk_len, GFP_KERNEL); + if (!junk) + return; + while (1) { + if (usb_bulk_msg(d->udev, + usb_rcvbulkpipe(d->udev, ep), + junk, junk_len, &rd_count, timeout) < 0) + break; + if (!rd_count) + break; + } + kfree(junk); +} + +static void cxusb_d680_dmb_drain_video(struct dvb_usb_device *d) +{ + struct usb_data_stream_properties *p = &d->props.adapter[0].stream; + const int timeout = 100; + const int junk_len = p->u.bulk.buffersize; + u8 *junk; + int rd_count; + + /* Discard remaining data in video pipe */ + junk = kmalloc(junk_len, GFP_KERNEL); + if (!junk) + return; + while (1) { + if (usb_bulk_msg(d->udev, + usb_rcvbulkpipe(d->udev, p->endpoint), + junk, junk_len, &rd_count, timeout) < 0) + break; + if (!rd_count) + break; + } + kfree(junk); +} + +static int cxusb_d680_dmb_streaming_ctrl( + struct dvb_usb_adapter *adap, int onoff) +{ + if (onoff) { + u8 buf[2] = { 0x03, 0x00 }; + cxusb_d680_dmb_drain_video(adap->dev); + return cxusb_ctrl_msg(adap->dev, CMD_STREAMING_ON, + buf, sizeof(buf), NULL, 0); + } else { + int ret = cxusb_ctrl_msg(adap->dev, + CMD_STREAMING_OFF, NULL, 0, NULL, 0); + return ret; + } +} + static int cxusb_rc_query(struct dvb_usb_device *d, u32 *event, int *state) { struct dvb_usb_rc_key *keymap = d->props.rc_key_map; @@ -337,6 +432,32 @@ static int cxusb_bluebird2_rc_query(struct dvb_usb_device *d, u32 *event, return 0; } +static int cxusb_d680_dmb_rc_query(struct dvb_usb_device *d, u32 *event, + int *state) +{ + struct dvb_usb_rc_key *keymap = d->props.rc_key_map; + u8 ircode[2]; + int i; + + *event = 0; + *state = REMOTE_NO_KEY_PRESSED; + + if (cxusb_ctrl_msg(d, 0x10, NULL, 0, ircode, 2) < 0) + return 0; + + for (i = 0; i < d->props.rc_key_map_size; i++) { + if (keymap[i].custom == ircode[0] && + keymap[i].data == ircode[1]) { + *event = keymap[i].event; + *state = REMOTE_KEY_PRESSED; + + return 0; + } + } + + return 0; +} + static struct dvb_usb_rc_key dvico_mce_rc_keys[] = { { 0xfe, 0x02, KEY_TV }, { 0xfe, 0x0e, KEY_MP3 }, @@ -424,6 +545,44 @@ static struct dvb_usb_rc_key dvico_portable_rc_keys[] = { { 0xfc, 0x00, KEY_UNKNOWN }, /* HD */ }; +static struct dvb_usb_rc_key d680_dmb_rc_keys[] = { + { 0x00, 0x38, KEY_UNKNOWN }, /* TV/AV */ + { 0x08, 0x0c, KEY_ZOOM }, + { 0x08, 0x00, KEY_0 }, + { 0x00, 0x01, KEY_1 }, + { 0x08, 0x02, KEY_2 }, + { 0x00, 0x03, KEY_3 }, + { 0x08, 0x04, KEY_4 }, + { 0x00, 0x05, KEY_5 }, + { 0x08, 0x06, KEY_6 }, + { 0x00, 0x07, KEY_7 }, + { 0x08, 0x08, KEY_8 }, + { 0x00, 0x09, KEY_9 }, + { 0x00, 0x0a, KEY_MUTE }, + { 0x08, 0x29, KEY_BACK }, + { 0x00, 0x12, KEY_CHANNELUP }, + { 0x08, 0x13, KEY_CHANNELDOWN }, + { 0x00, 0x2b, KEY_VOLUMEUP }, + { 0x08, 0x2c, KEY_VOLUMEDOWN }, + { 0x00, 0x20, KEY_UP }, + { 0x08, 0x21, KEY_DOWN }, + { 0x00, 0x11, KEY_LEFT }, + { 0x08, 0x10, KEY_RIGHT }, + { 0x00, 0x0d, KEY_OK }, + { 0x08, 0x1f, KEY_RECORD }, + { 0x00, 0x17, KEY_PLAYPAUSE }, + { 0x08, 0x16, KEY_PLAYPAUSE }, + { 0x00, 0x0b, KEY_STOP }, + { 0x08, 0x27, KEY_FASTFORWARD }, + { 0x00, 0x26, KEY_REWIND }, + { 0x08, 0x1e, KEY_UNKNOWN }, /* Time Shift */ + { 0x00, 0x0e, KEY_UNKNOWN }, /* Snapshot */ + { 0x08, 0x2d, KEY_UNKNOWN }, /* Mouse Cursor */ + { 0x00, 0x0f, KEY_UNKNOWN }, /* Minimize/Maximize */ + { 0x08, 0x14, KEY_UNKNOWN }, /* Shuffle */ + { 0x00, 0x25, KEY_POWER }, +}; + static int cxusb_dee1601_demod_init(struct dvb_frontend* fe) { static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x28 }; @@ -529,6 +688,24 @@ static struct mxl5005s_config aver_a868r_tuner = { .AgcMasterByte = 0x00, }; +/* FIXME: needs tweaking */ +static struct mxl5005s_config d680_dmb_tuner = { + .i2c_address = 0x63, + .if_freq = 36125000UL, + .xtal_freq = CRYSTAL_FREQ_16000000HZ, + .agc_mode = MXL_SINGLE_AGC, + .tracking_filter = MXL_TF_C, + .rssi_enable = MXL_RSSI_ENABLE, + .cap_select = MXL_CAP_SEL_ENABLE, + .div_out = MXL_DIV_OUT_4, + .clock_out = MXL_CLOCK_OUT_DISABLE, + .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM, + .top = MXL5005S_TOP_25P2, + .mod_mode = MXL_DIGITAL_MODE, + .if_mode = MXL_ZERO_IF, + .AgcMasterByte = 0x00, +}; + /* Callbacks for DVB USB */ static int cxusb_fmd1216me_tuner_attach(struct dvb_usb_adapter *adap) { @@ -617,6 +794,14 @@ static int cxusb_mxl5003s_tuner_attach(struct dvb_usb_adapter *adap) return 0; } +static int cxusb_d680_dmb_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct dvb_frontend *fe; + fe = dvb_attach(mxl5005s_attach, adap->fe, + &adap->dev->i2c_adap, &d680_dmb_tuner); + return (fe == NULL) ? -EIO : 0; +} + static int cxusb_cx22702_frontend_attach(struct dvb_usb_adapter *adap) { u8 b; @@ -906,6 +1091,54 @@ static int cxusb_nano2_frontend_attach(struct dvb_usb_adapter *adap) return -EIO; } +static struct lgs8gl5_config lgs8gl5_cfg = { + .demod_address = 0x19, +}; + +static int cxusb_d680_dmb_frontend_attach(struct dvb_usb_adapter *adap) +{ + struct dvb_usb_device *d = adap->dev; + int n; + + /* Select required USB configuration */ + if (usb_set_interface(d->udev, 0, 0) < 0) + err("set interface failed"); + + /* Unblock all USB pipes */ + usb_clear_halt(d->udev, + usb_sndbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint)); + usb_clear_halt(d->udev, + usb_rcvbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint)); + usb_clear_halt(d->udev, + usb_rcvbulkpipe(d->udev, d->props.adapter[0].stream.endpoint)); + + /* Drain USB pipes to avoid hang after reboot */ + for (n = 0; n < 5; n++) { + cxusb_d680_dmb_drain_message(d); + cxusb_d680_dmb_drain_video(d); + msleep(200); + } + + /* Reset the tuner */ + if (cxusb_d680_dmb_gpio_tuner(d, 0x07, 0) < 0) { + err("clear tuner gpio failed"); + return -EIO; + } + msleep(100); + if (cxusb_d680_dmb_gpio_tuner(d, 0x07, 1) < 0) { + err("set tuner gpio failed"); + return -EIO; + } + msleep(100); + + /* Attach frontend */ + adap->fe = dvb_attach(lgs8gl5_attach, &lgs8gl5_cfg, &d->i2c_adap); + if (adap->fe == NULL) + return -EIO; + + return 0; +} + /* * DViCO has shipped two devices with the same USB ID, but only one of them * needs a firmware download. Check the device class details to see if they @@ -985,6 +1218,7 @@ static struct dvb_usb_device_properties cxusb_bluebird_dualdig4_rev2_properties; static struct dvb_usb_device_properties cxusb_bluebird_nano2_properties; static struct dvb_usb_device_properties cxusb_bluebird_nano2_needsfirmware_properties; static struct dvb_usb_device_properties cxusb_aver_a868r_properties; +static struct dvb_usb_device_properties cxusb_d680_dmb_properties; static int cxusb_probe(struct usb_interface *intf, const struct usb_device_id *id) @@ -1011,6 +1245,8 @@ static int cxusb_probe(struct usb_interface *intf, 0 == dvb_usb_device_init(intf, &cxusb_bluebird_dualdig4_rev2_properties, THIS_MODULE, NULL, adapter_nr) || + 0 == dvb_usb_device_init(intf, &cxusb_d680_dmb_properties, + THIS_MODULE, NULL, adapter_nr) || 0) return 0; @@ -1036,6 +1272,7 @@ static struct usb_device_id cxusb_table [] = { { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2_NFW_WARM) }, { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_A868R) }, { USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_4_REV_2) }, + { USB_DEVICE(USB_VID_CONEXANT, USB_PID_CONEXANT_D680_DMB) }, {} /* Terminating entry */ }; MODULE_DEVICE_TABLE (usb, cxusb_table); @@ -1530,6 +1767,55 @@ struct dvb_usb_device_properties cxusb_bluebird_dualdig4_rev2_properties = { } }; +static struct dvb_usb_device_properties cxusb_d680_dmb_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = CYPRESS_FX2, + + .size_of_priv = sizeof(struct cxusb_state), + + .num_adapters = 1, + .adapter = { + { + .streaming_ctrl = cxusb_d680_dmb_streaming_ctrl, + .frontend_attach = cxusb_d680_dmb_frontend_attach, + .tuner_attach = cxusb_d680_dmb_tuner_attach, + + /* parameter for the MPEG2-data transfer */ + .stream = { + .type = USB_BULK, + .count = 5, + .endpoint = 0x02, + .u = { + .bulk = { + .buffersize = 8192, + } + } + }, + }, + }, + + .power_ctrl = cxusb_d680_dmb_power_ctrl, + + .i2c_algo = &cxusb_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + + .rc_interval = 100, + .rc_key_map = d680_dmb_rc_keys, + .rc_key_map_size = ARRAY_SIZE(d680_dmb_rc_keys), + .rc_query = cxusb_d680_dmb_rc_query, + + .num_device_descs = 1, + .devices = { + { + "Conexant DMB-TH Stick", + { NULL }, + { &cxusb_table[18], NULL }, + }, + } +}; + static struct usb_driver cxusb_driver = { .name = "dvb_usb_cxusb", .probe = cxusb_probe, diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index f327a154b6c6..81369b79e75a 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -22,6 +22,7 @@ #define USB_VID_AVERMEDIA 0x07ca #define USB_VID_COMPRO 0x185b #define USB_VID_COMPRO_UNK 0x145f +#define USB_VID_CONEXANT 0x0572 #define USB_VID_CYPRESS 0x04b4 #define USB_VID_DIBCOM 0x10b8 #define USB_VID_DPOSH 0x1498 @@ -69,6 +70,7 @@ #define USB_PID_COMPRO_DVBU2000_UNK_WARM 0x010d #define USB_PID_COMPRO_VIDEOMATE_U500 0x1e78 #define USB_PID_COMPRO_VIDEOMATE_U500_PC 0x1e80 +#define USB_PID_CONEXANT_D680_DMB 0x86d6 #define USB_PID_DIBCOM_HOOK_DEFAULT 0x0064 #define USB_PID_DIBCOM_HOOK_DEFAULT_REENUM 0x0065 #define USB_PID_DIBCOM_MOD3000_COLD 0x0bb8 diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig index 7dbb4a223c99..774f5c2a71e8 100644 --- a/drivers/media/dvb/frontends/Kconfig +++ b/drivers/media/dvb/frontends/Kconfig @@ -385,4 +385,11 @@ config DVB_ISL6421 help An SEC control chip. +config DVB_LGS8GL5 + tristate "Silicon Legend LGS-8GL5 demodulator (OFDM)" + depends on DVB_CORE && I2C + default m if DVB_FE_CUSTOMISE + help + A DMB-TH tuner module. Say Y when you want to support this frontend. + endmenu diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile index 028da55611c0..262eaa429f5d 100644 --- a/drivers/media/dvb/frontends/Makefile +++ b/drivers/media/dvb/frontends/Makefile @@ -48,3 +48,4 @@ obj-$(CONFIG_DVB_TUNER_ITD1000) += itd1000.o obj-$(CONFIG_DVB_AU8522) += au8522.o obj-$(CONFIG_DVB_TDA10048) += tda10048.o obj-$(CONFIG_DVB_S5H1411) += s5h1411.o +obj-$(CONFIG_DVB_LGS8GL5) += lgs8gl5.o diff --git a/drivers/media/dvb/frontends/lgs8gl5.c b/drivers/media/dvb/frontends/lgs8gl5.c new file mode 100644 index 000000000000..c0a223d28b0f --- /dev/null +++ b/drivers/media/dvb/frontends/lgs8gl5.c @@ -0,0 +1,480 @@ +/* + Legend Silicon LGS-8GL5 DMB-TH OFDM demodulator driver + + Copyright (C) 2008 Sirius International (Hong Kong) Limited + Timothy Lee + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#include +#include +#include +#include +#include +#include "dvb_frontend.h" +#include "lgs8gl5.h" + + +#define REG_RESET 0x02 +#define REG_RESET_OFF 0x01 +#define REG_03 0x03 +#define REG_04 0x04 +#define REG_07 0x07 +#define REG_09 0x09 +#define REG_0A 0x0a +#define REG_0B 0x0b +#define REG_0C 0x0c +#define REG_37 0x37 +#define REG_STRENGTH 0x4b +#define REG_STRENGTH_MASK 0x7f +#define REG_STRENGTH_CARRIER 0x80 +#define REG_INVERSION 0x7c +#define REG_INVERSION_ON 0x80 +#define REG_7D 0x7d +#define REG_7E 0x7e +#define REG_A2 0xa2 +#define REG_STATUS 0xa4 +#define REG_STATUS_SYNC 0x04 +#define REG_STATUS_LOCK 0x01 + + +struct lgs8gl5_state { + struct i2c_adapter *i2c; + const struct lgs8gl5_config *config; + struct dvb_frontend frontend; +}; + + +static int debug; +#define dprintk(args...) \ + do { \ + if (debug) \ + printk(KERN_DEBUG "lgs8gl5: " args); \ + } while (0) + + +/* Writes into demod's register */ +static int +lgs8gl5_write_reg(struct lgs8gl5_state *state, u8 reg, u8 data) +{ + int ret; + u8 buf[] = {reg, data}; + struct i2c_msg msg = { + .addr = state->config->demod_address, + .flags = 0, + .buf = buf, + .len = 2 + }; + + ret = i2c_transfer(state->i2c, &msg, 1); + if (ret != 1) + dprintk("%s: error (reg=0x%02x, val=0x%02x, ret=%i)\n", + __func__, reg, data, ret); + return (ret != 1) ? -1 : 0; +} + + +/* Reads from demod's register */ +static int +lgs8gl5_read_reg(struct lgs8gl5_state *state, u8 reg) +{ + int ret, j; + u8 b0[] = {reg}; + u8 b1[] = {0}; + struct i2c_msg msg[2] = { + { + .addr = state->config->demod_address, + .flags = 0, + .buf = b0, + .len = 1 + }, + { + .addr = state->config->demod_address, + .flags = I2C_M_RD, + .buf = b1, + .len = 1 + } + }; + + ret = i2c_transfer(state->i2c, msg, 2); + if (ret != 2) + return -EIO; + + return b1[0]; +} + + +static int +lgs8gl5_update_reg(struct lgs8gl5_state *state, u8 reg, u8 data) +{ + lgs8gl5_read_reg(state, reg); + lgs8gl5_write_reg(state, reg, data); + return 0; +} + + +/* Writes into alternate device's register */ +/* TODO: Find out what that device is for! */ +static int +lgs8gl5_update_alt_reg(struct lgs8gl5_state *state, u8 reg, u8 data) +{ + int ret, j; + u8 b0[] = {reg}; + u8 b1[] = {0}; + u8 b2[] = {reg, data}; + struct i2c_msg msg[3] = { + { + .addr = state->config->demod_address + 2, + .flags = 0, + .buf = b0, + .len = 1 + }, + { + .addr = state->config->demod_address + 2, + .flags = I2C_M_RD, + .buf = b1, + .len = 1 + }, + { + .addr = state->config->demod_address + 2, + .flags = 0, + .buf = b2, + .len = 2 + }, + }; + + ret = i2c_transfer(state->i2c, msg, 3); + return (ret != 3) ? -1 : 0; +} + + +static void +lgs8gl5_soft_reset(struct lgs8gl5_state *state) +{ + u8 val; + + dprintk("%s\n", __func__); + + val = lgs8gl5_read_reg(state, REG_RESET); + lgs8gl5_write_reg(state, REG_RESET, val & ~REG_RESET_OFF); + lgs8gl5_write_reg(state, REG_RESET, val | REG_RESET_OFF); + msleep(5); +} + + +static int +lgs8gl5_set_inversion(struct lgs8gl5_state *state, int inversion) +{ + u8 val; + + dprintk("%s\n", __func__); + + switch (inversion) { + case INVERSION_AUTO: + return -EOPNOTSUPP; + case INVERSION_ON: + val = lgs8gl5_read_reg(state, REG_INVERSION); + return lgs8gl5_write_reg(state, REG_INVERSION, + val | REG_INVERSION_ON); + case INVERSION_OFF: + val = lgs8gl5_read_reg(state, REG_INVERSION); + return lgs8gl5_write_reg(state, REG_INVERSION, + val & ~REG_INVERSION_ON); + default: + return -EINVAL; + } +} + + +/* Starts demodulation */ +static void +lgs8gl5_start_demod(struct lgs8gl5_state *state) +{ + u8 val; + int n; + + dprintk("%s\n", __func__); + + lgs8gl5_update_alt_reg(state, 0xc2, 0x28); + lgs8gl5_soft_reset(state); + lgs8gl5_update_reg(state, REG_07, 0x10); + lgs8gl5_update_reg(state, REG_07, 0x10); + lgs8gl5_write_reg(state, REG_09, 0x0e); + lgs8gl5_write_reg(state, REG_0A, 0xe5); + lgs8gl5_write_reg(state, REG_0B, 0x35); + lgs8gl5_write_reg(state, REG_0C, 0x30); + + lgs8gl5_update_reg(state, REG_03, 0x00); + lgs8gl5_update_reg(state, REG_7E, 0x01); + lgs8gl5_update_alt_reg(state, 0xc5, 0x00); + lgs8gl5_update_reg(state, REG_04, 0x02); + lgs8gl5_update_reg(state, REG_37, 0x01); + lgs8gl5_soft_reset(state); + + /* Wait for carrier */ + for (n = 0; n < 10; n++) { + val = lgs8gl5_read_reg(state, REG_STRENGTH); + dprintk("Wait for carrier[%d] 0x%02X\n", n, val); + if (val & REG_STRENGTH_CARRIER) + break; + msleep(4); + } + if (!(val & REG_STRENGTH_CARRIER)) + return; + + /* Wait for lock */ + for (n = 0; n < 20; n++) { + val = lgs8gl5_read_reg(state, REG_STATUS); + dprintk("Wait for lock[%d] 0x%02X\n", n, val); + if (val & REG_STATUS_LOCK) + break; + msleep(12); + } + if (!(val & REG_STATUS_LOCK)) + return; + + lgs8gl5_write_reg(state, REG_7D, lgs8gl5_read_reg(state, REG_A2)); + lgs8gl5_soft_reset(state); +} + + +static int +lgs8gl5_init(struct dvb_frontend *fe) +{ + struct lgs8gl5_state *state = fe->demodulator_priv; + + dprintk("%s\n", __func__); + + lgs8gl5_update_alt_reg(state, 0xc2, 0x28); + lgs8gl5_soft_reset(state); + lgs8gl5_update_reg(state, REG_07, 0x10); + lgs8gl5_update_reg(state, REG_07, 0x10); + lgs8gl5_write_reg(state, REG_09, 0x0e); + lgs8gl5_write_reg(state, REG_0A, 0xe5); + lgs8gl5_write_reg(state, REG_0B, 0x35); + lgs8gl5_write_reg(state, REG_0C, 0x30); + + return 0; +} + + +static int +lgs8gl5_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct lgs8gl5_state *state = fe->demodulator_priv; + u8 level = lgs8gl5_read_reg(state, REG_STRENGTH); + u8 flags = lgs8gl5_read_reg(state, REG_STATUS); + + *status = 0; + + if ((level & REG_STRENGTH_MASK) > 0) + *status |= FE_HAS_SIGNAL; + if (level & REG_STRENGTH_CARRIER) + *status |= FE_HAS_CARRIER; + if (flags & REG_STATUS_SYNC) + *status |= FE_HAS_SYNC; + if (flags & REG_STATUS_LOCK) + *status |= FE_HAS_LOCK; + + return 0; +} + + +static int +lgs8gl5_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + struct lgs8gl5_state *state = fe->demodulator_priv; + *ber = 0; + + return 0; +} + + +static int +lgs8gl5_read_signal_strength(struct dvb_frontend *fe, u16 *signal_strength) +{ + struct lgs8gl5_state *state = fe->demodulator_priv; + u8 level = lgs8gl5_read_reg(state, REG_STRENGTH); + *signal_strength = (level & REG_STRENGTH_MASK) << 8; + + return 0; +} + + +static int +lgs8gl5_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct lgs8gl5_state *state = fe->demodulator_priv; + u8 level = lgs8gl5_read_reg(state, REG_STRENGTH); + *snr = (level & REG_STRENGTH_MASK) << 8; + + return 0; +} + + +static int +lgs8gl5_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + struct lgs8gl5_state *state = fe->demodulator_priv; + *ucblocks = 0; + + return 0; +} + + +static int +lgs8gl5_set_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p) +{ + struct lgs8gl5_state *state = fe->demodulator_priv; + + dprintk("%s\n", __func__); + + if (p->u.ofdm.bandwidth != BANDWIDTH_8_MHZ) + return -EINVAL; + + if (fe->ops.tuner_ops.set_params) { + fe->ops.tuner_ops.set_params(fe, p); + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 0); + } + + /* lgs8gl5_set_inversion(state, p->inversion); */ + + lgs8gl5_start_demod(state); + + return 0; +} + + +static int +lgs8gl5_get_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p) +{ + struct lgs8gl5_state *state = fe->demodulator_priv; + u8 inv = lgs8gl5_read_reg(state, REG_INVERSION); + struct dvb_ofdm_parameters *o = &p->u.ofdm; + + p->inversion = (inv & REG_INVERSION_ON) ? INVERSION_ON : INVERSION_OFF; + + o->code_rate_HP = FEC_1_2; + o->code_rate_LP = FEC_7_8; + o->guard_interval = GUARD_INTERVAL_1_32; + o->transmission_mode = TRANSMISSION_MODE_2K; + o->constellation = QAM_64; + o->hierarchy_information = HIERARCHY_NONE; + o->bandwidth = BANDWIDTH_8_MHZ; + + return 0; +} + + +static int +lgs8gl5_get_tune_settings(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings *fesettings) +{ + fesettings->min_delay_ms = 240; + fesettings->step_size = 0; + fesettings->max_drift = 0; + return 0; +} + + +static void +lgs8gl5_release(struct dvb_frontend *fe) +{ + struct lgs8gl5_state *state = fe->demodulator_priv; + kfree(state); +} + + +static struct dvb_frontend_ops lgs8gl5_ops; + + +struct dvb_frontend* +lgs8gl5_attach(const struct lgs8gl5_config *config, struct i2c_adapter *i2c) +{ + struct lgs8gl5_state *state = NULL; + + dprintk("%s\n", __func__); + + /* Allocate memory for the internal state */ + state = kmalloc(sizeof(struct lgs8gl5_state), GFP_KERNEL); + if (state == NULL) + goto error; + + /* Setup the state */ + state->config = config; + state->i2c = i2c; + + /* Check if the demod is there */ + if (lgs8gl5_read_reg(state, REG_RESET) < 0) + goto error; + + /* Create dvb_frontend */ + memcpy(&state->frontend.ops, &lgs8gl5_ops, + sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + return &state->frontend; + +error: + kfree(state); + return NULL; +} +EXPORT_SYMBOL(lgs8gl5_attach); + + +static struct dvb_frontend_ops lgs8gl5_ops = { + .info = { + .name = "Legend Silicon LGS-8GL5 DMB-TH", + .type = FE_OFDM, + .frequency_min = 474000000, + .frequency_max = 858000000, + .frequency_stepsize = 10000, + .frequency_tolerance = 0, + .caps = FE_CAN_FEC_AUTO | + FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_32 | + FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_BANDWIDTH_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_HIERARCHY_AUTO | + FE_CAN_RECOVER + }, + + .release = lgs8gl5_release, + + .init = lgs8gl5_init, + + .set_frontend = lgs8gl5_set_frontend, + .get_frontend = lgs8gl5_get_frontend, + .get_tune_settings = lgs8gl5_get_tune_settings, + + .read_status = lgs8gl5_read_status, + .read_ber = lgs8gl5_read_ber, + .read_signal_strength = lgs8gl5_read_signal_strength, + .read_snr = lgs8gl5_read_snr, + .read_ucblocks = lgs8gl5_read_ucblocks, +}; + + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); + +MODULE_DESCRIPTION("Legend Silicon LGS-8GL5 DMB-TH Demodulator driver"); +MODULE_AUTHOR("Timothy Lee"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/frontends/lgs8gl5.h b/drivers/media/dvb/frontends/lgs8gl5.h new file mode 100644 index 000000000000..d14176787a7d --- /dev/null +++ b/drivers/media/dvb/frontends/lgs8gl5.h @@ -0,0 +1,45 @@ +/* + Legend Silicon LGS-8GL5 DMB-TH OFDM demodulator driver + + Copyright (C) 2008 Sirius International (Hong Kong) Limited + Timothy Lee + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#ifndef LGS8GL5_H +#define LGS8GL5_H + +#include + +struct lgs8gl5_config { + /* the demodulator's i2c address */ + u8 demod_address; +}; + +#if defined(CONFIG_DVB_LGS8GL5) || \ + (defined(CONFIG_DVB_LGS8GL5_MODULE) && defined(MODULE)) +extern struct dvb_frontend *lgs8gl5_attach( + const struct lgs8gl5_config *config, struct i2c_adapter *i2c); +#else +static inline struct dvb_frontend *lgs8gl5_attach( + const struct lgs8gl5_config *config, struct i2c_adapter *i2c) { + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif /* CONFIG_DVB_LGS8GL5 */ + +#endif /* LGS8GL5_H */ -- cgit v1.2.3 From 80619de8117701cad1fb5526be6fcfe6fc2a6cc2 Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Mon, 15 Sep 2008 17:18:09 -0300 Subject: V4L/DVB (8972): initial driver for af9015 chipset - initial driver for the Afatech AF9015 chipset Thanks-to: Mark Spieth Thanks-to: Lee Essen Thanks-to: Luca Olivetti Thanks-to: Andrew Leech Thanks-to: Nick Andrew Thanks-to: Rafael Antoniello Thanks-to: Jarryd Beck Thanks-to: Jose Alberto Reguero Thanks-to: Benjamin Larsson Thanks-to: Wolfgang Breyha Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/Kconfig | 12 + drivers/media/dvb/dvb-usb/Makefile | 3 + drivers/media/dvb/dvb-usb/af9015.c | 1459 +++++++++++++++++++++++++++++++ drivers/media/dvb/dvb-usb/af9015.h | 524 +++++++++++ drivers/media/dvb/dvb-usb/dvb-usb-ids.h | 17 +- 5 files changed, 2014 insertions(+), 1 deletion(-) create mode 100644 drivers/media/dvb/dvb-usb/af9015.c create mode 100644 drivers/media/dvb/dvb-usb/af9015.h (limited to 'drivers/media/dvb/dvb-usb/dvb-usb-ids.h') diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index 1d9e98cee9e7..b35d7f0db9aa 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -271,3 +271,15 @@ config DVB_USB_DTV5100 select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE help Say Y here to support the AME DTV-5100 USB2.0 DVB-T receiver. + +config DVB_USB_AF9015 + tristate "Afatech AF9015 DVB-T USB2.0 support" + depends on DVB_USB && EXPERIMENTAL + select DVB_AF9013 + select DVB_PLL if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE + help + Say Y here to support the Afatech AF9015 based DVB-T USB2.0 receiver diff --git a/drivers/media/dvb/dvb-usb/Makefile b/drivers/media/dvb/dvb-usb/Makefile index 116544f4272d..ece8c9dfed18 100644 --- a/drivers/media/dvb/dvb-usb/Makefile +++ b/drivers/media/dvb/dvb-usb/Makefile @@ -70,6 +70,9 @@ obj-$(CONFIG_DVB_USB_DW2102) += dvb-usb-dw2102.o dvb-usb-dtv5100-objs = dtv5100.o obj-$(CONFIG_DVB_USB_DTV5100) += dvb-usb-dtv5100.o +dvb-usb-af9015-objs = af9015.o +obj-$(CONFIG_DVB_USB_AF9015) += dvb-usb-af9015.o + EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/ # due to tuner-xc3028 EXTRA_CFLAGS += -Idrivers/media/common/tuners diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c new file mode 100644 index 000000000000..a284648094c2 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/af9015.c @@ -0,0 +1,1459 @@ +/* + * DVB USB Linux driver for Afatech AF9015 DVB-T USB2.0 receiver + * + * Copyright (C) 2007 Antti Palosaari + * + * Thanks to Afatech who kindly provided information. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include "af9015.h" +#include "af9013.h" +#include "mt2060.h" +#include "qt1010.h" +#include "tda18271.h" +#include "mxl5005s.h" +#if 0 +#include "mc44s80x.h" +#endif + +int dvb_usb_af9015_debug; +module_param_named(debug, dvb_usb_af9015_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS); +int dvb_usb_af9015_remote; +module_param_named(remote, dvb_usb_af9015_remote, int, 0644); +MODULE_PARM_DESC(remote, "select remote"); +int dvb_usb_af9015_dual_mode; +module_param_named(dual_mode, dvb_usb_af9015_dual_mode, int, 0644); +MODULE_PARM_DESC(dual_mode, "enable dual mode"); +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +static DEFINE_MUTEX(af9015_usb_mutex); + +static struct af9015_config af9015_config; +static struct dvb_usb_device_properties af9015_properties[2]; +int af9015_properties_count = ARRAY_SIZE(af9015_properties); + +static struct af9013_config af9015_af9013_config[] = { + { + .demod_address = AF9015_I2C_DEMOD, + .output_mode = AF9013_OUTPUT_MODE_USB, + .api_version = { 0, 1, 9, 0 }, + .gpio[0] = AF9013_GPIO_HI, + .gpio[1] = AF9013_GPIO_LO, + .gpio[3] = AF9013_GPIO_TUNER_ON, + + }, { + .output_mode = AF9013_OUTPUT_MODE_SERIAL, + .api_version = { 0, 1, 9, 0 }, + .gpio[0] = AF9013_GPIO_TUNER_ON, + .gpio[1] = AF9013_GPIO_LO, + } +}; + +static int af9015_rw_udev(struct usb_device *udev, struct req_t *req) +{ + int act_len, ret; + u8 buf[64]; + u8 write = 1; + u8 msg_len = 8; + static u8 seq; /* packet sequence number */ + + if (mutex_lock_interruptible(&af9015_usb_mutex) < 0) + return -EAGAIN; + + buf[0] = req->cmd; + buf[1] = seq++; + buf[2] = req->i2c_addr; + buf[3] = req->addr >> 8; + buf[4] = req->addr & 0xff; + buf[5] = req->mbox; + buf[6] = req->addr_len; + buf[7] = req->data_len; + + switch (req->cmd) { + case GET_CONFIG: + case BOOT: + case READ_MEMORY: + case RECONNECT_USB: + case GET_IR_CODE: + write = 0; + break; + case READ_I2C: + write = 0; + buf[2] |= 0x01; /* set I2C direction */ + case WRITE_I2C: + buf[0] = READ_WRITE_I2C; + break; + case WRITE_MEMORY: + if (((req->addr & 0xff00) == 0xff00) || + ((req->addr & 0xae00) == 0xae00)) + buf[0] = WRITE_VIRTUAL_MEMORY; + case WRITE_VIRTUAL_MEMORY: + case COPY_FIRMWARE: + case DOWNLOAD_FIRMWARE: + break; + default: + err("unknown command:%d", req->cmd); + ret = -1; + goto error_unlock; + } + + /* write requested */ + if (write) { + memcpy(&buf[8], req->data, req->data_len); + msg_len += req->data_len; + } + deb_xfer(">>> "); + debug_dump(buf, msg_len, deb_xfer); + + /* send req */ + ret = usb_bulk_msg(udev, usb_sndbulkpipe(udev, 0x02), buf, msg_len, + &act_len, AF9015_USB_TIMEOUT); + if (ret) + err("bulk message failed:%d (%d/%d)", ret, msg_len, act_len); + else + if (act_len != msg_len) + ret = -1; /* all data is not send */ + if (ret) + goto error_unlock; + + /* no ack for those packets */ + if (req->cmd == DOWNLOAD_FIRMWARE || req->cmd == RECONNECT_USB) + goto exit_unlock; + + /* receive ack and data if read req */ + msg_len = 1 + 1 + req->data_len; /* seq + status + data len */ + ret = usb_bulk_msg(udev, usb_rcvbulkpipe(udev, 0x81), buf, msg_len, + &act_len, AF9015_USB_TIMEOUT); + if (ret) { + err("recv bulk message failed:%d", ret); + ret = -1; + goto error_unlock; + } + + deb_xfer("<<< "); + debug_dump(buf, act_len, deb_xfer); + + /* remote controller query status is 1 if remote code is not received */ + if (req->cmd == GET_IR_CODE && buf[1] == 1) { + buf[1] = 0; /* clear command "error" status */ + memset(&buf[2], 0, req->data_len); + buf[3] = 1; /* no remote code received mark */ + } + + /* check status */ + if (buf[1]) { + err("command failed:%d", buf[1]); + ret = -1; + goto error_unlock; + } + + /* read request, copy returned data to return buf */ + if (!write) + memcpy(req->data, &buf[2], req->data_len); + +error_unlock: +exit_unlock: + mutex_unlock(&af9015_usb_mutex); + + return ret; +} + +static int af9015_ctrl_msg(struct dvb_usb_device *d, struct req_t *req) +{ + return af9015_rw_udev(d->udev, req); +} + +static int af9015_write_regs(struct dvb_usb_device *d, u16 addr, u8 *val, + u8 len) +{ + struct req_t req = {WRITE_MEMORY, AF9015_I2C_DEMOD, addr, 0, 0, len, + val}; + return af9015_ctrl_msg(d, &req); +} + +static int af9015_write_reg(struct dvb_usb_device *d, u16 addr, u8 val) +{ + return af9015_write_regs(d, addr, &val, 1); +} + +static int af9015_read_reg(struct dvb_usb_device *d, u16 addr, u8 *val) +{ + struct req_t req = {READ_MEMORY, AF9015_I2C_DEMOD, addr, 0, 0, 1, val}; + return af9015_ctrl_msg(d, &req); +} + +static int af9015_write_reg_i2c(struct dvb_usb_device *d, u8 addr, u16 reg, + u8 val) +{ + struct req_t req = {WRITE_I2C, addr, reg, 1, 1, 1, &val}; + + if (addr == af9015_af9013_config[0].demod_address || + addr == af9015_af9013_config[1].demod_address) + req.addr_len = 3; + + return af9015_ctrl_msg(d, &req); +} + +static int af9015_read_reg_i2c(struct dvb_usb_device *d, u8 addr, u16 reg, + u8 *val) +{ + struct req_t req = {READ_I2C, addr, reg, 0, 1, 1, val}; + + if (addr == af9015_af9013_config[0].demod_address || + addr == af9015_af9013_config[1].demod_address) + req.addr_len = 3; + + return af9015_ctrl_msg(d, &req); +} + +static int af9015_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], + int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + int ret = 0, i = 0; + u16 addr; + u8 mbox, addr_len; + struct req_t req; + +/* TODO: implement bus lock + +The bus lock is needed because there is two tuners both using same I2C-address. +Due to that the only way to select correct tuner is use demodulator I2C-gate. + +................................................ +. AF9015 includes integrated AF9013 demodulator. +. ____________ ____________ . ____________ +.| uC | | demod | . | tuner | +.|------------| |------------| . |------------| +.| AF9015 | | AF9013/5 | . | MXL5003 | +.| |--+----I2C-------|-----/ -----|-.-----I2C-------| | +.| | | | addr 0x38 | . | addr 0xc6 | +.|____________| | |____________| . |____________| +.................|.............................. + | ____________ ____________ + | | demod | | tuner | + | |------------| |------------| + | | AF9013 | | MXL5003 | + +----I2C-------|-----/ -----|-------I2C-------| | + | addr 0x3a | | addr 0xc6 | + |____________| |____________| +*/ + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + while (i < num) { + if (msg[i].addr == af9015_af9013_config[0].demod_address || + msg[i].addr == af9015_af9013_config[1].demod_address) { + addr = msg[i].buf[0] << 8; + addr += msg[i].buf[1]; + mbox = msg[i].buf[2]; + addr_len = 3; + } else { + addr = msg[i].buf[0]; + addr_len = 1; + mbox = 0; + } + + if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) { + if (msg[i].addr == + af9015_af9013_config[0].demod_address) + req.cmd = READ_MEMORY; + else + req.cmd = READ_I2C; + req.i2c_addr = msg[i].addr; + req.addr = addr; + req.mbox = mbox; + req.addr_len = addr_len; + req.data_len = msg[i+1].len; + req.data = &msg[i+1].buf[0]; + ret = af9015_ctrl_msg(d, &req); + i += 2; + } else { + if (msg[i].addr == + af9015_af9013_config[0].demod_address) + req.cmd = WRITE_MEMORY; + else + req.cmd = WRITE_I2C; + req.i2c_addr = msg[i].addr; + req.addr = addr; + req.mbox = mbox; + req.addr_len = addr_len; + req.data_len = msg[i].len-addr_len; + req.data = &msg[i].buf[addr_len]; + ret = af9015_ctrl_msg(d, &req); + i += 1; + } + if (ret) + goto error; + + } + ret = i; + +error: + mutex_unlock(&d->i2c_mutex); + + return ret; +} + +static u32 af9015_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm af9015_i2c_algo = { + .master_xfer = af9015_i2c_xfer, + .functionality = af9015_i2c_func, +}; + +static int af9015_do_reg_bit(struct dvb_usb_device *d, u16 addr, u8 bit, u8 op) +{ + int ret; + u8 val, mask = 0x01; + + ret = af9015_read_reg(d, addr, &val); + if (ret) + return ret; + + mask <<= bit; + if (op) { + /* set bit */ + val |= mask; + } else { + /* clear bit */ + mask ^= 0xff; + val &= mask; + } + + return af9015_write_reg(d, addr, val); +} + +static int af9015_set_reg_bit(struct dvb_usb_device *d, u16 addr, u8 bit) +{ + return af9015_do_reg_bit(d, addr, bit, 1); +} + +static int af9015_clear_reg_bit(struct dvb_usb_device *d, u16 addr, u8 bit) +{ + return af9015_do_reg_bit(d, addr, bit, 0); +} + +static int af9015_init_endpoint(struct dvb_usb_device *d) +{ + int ret; + u16 frame_size; + u8 packet_size; + deb_info("%s: USB speed:%d\n", __func__, d->udev->speed); + +#define TS_PACKET_SIZE 188 + +#define TS_USB20_PACKET_COUNT 348 +#define TS_USB20_FRAME_SIZE (TS_PACKET_SIZE*TS_USB20_PACKET_COUNT) + +#define TS_USB11_PACKET_COUNT 21 +#define TS_USB11_FRAME_SIZE (TS_PACKET_SIZE*TS_USB11_PACKET_COUNT) + +#define TS_USB20_MAX_PACKET_SIZE 512 +#define TS_USB11_MAX_PACKET_SIZE 64 + + if (d->udev->speed == USB_SPEED_FULL) { + frame_size = TS_USB11_FRAME_SIZE/4; + packet_size = TS_USB11_MAX_PACKET_SIZE/4; + } else { + frame_size = TS_USB20_FRAME_SIZE/4; + packet_size = TS_USB20_MAX_PACKET_SIZE/4; + } + + ret = af9015_set_reg_bit(d, 0xd507, 2); /* assert EP4 reset */ + if (ret) + goto error; + ret = af9015_set_reg_bit(d, 0xd50b, 1); /* assert EP5 reset */ + if (ret) + goto error; + ret = af9015_clear_reg_bit(d, 0xdd11, 5); /* disable EP4 */ + if (ret) + goto error; + ret = af9015_clear_reg_bit(d, 0xdd11, 6); /* disable EP5 */ + if (ret) + goto error; + ret = af9015_set_reg_bit(d, 0xdd11, 5); /* enable EP4 */ + if (ret) + goto error; + if (af9015_config.dual_mode) { + ret = af9015_set_reg_bit(d, 0xdd11, 6); /* enable EP5 */ + if (ret) + goto error; + } + ret = af9015_clear_reg_bit(d, 0xdd13, 5); /* disable EP4 NAK */ + if (ret) + goto error; + if (af9015_config.dual_mode) { + ret = af9015_clear_reg_bit(d, 0xdd13, 6); /* disable EP5 NAK */ + if (ret) + goto error; + } + /* EP4 xfer length */ + ret = af9015_write_reg(d, 0xdd88, frame_size & 0xff); + if (ret) + goto error; + ret = af9015_write_reg(d, 0xdd89, frame_size >> 8); + if (ret) + goto error; + /* EP5 xfer length */ + ret = af9015_write_reg(d, 0xdd8a, frame_size & 0xff); + if (ret) + goto error; + ret = af9015_write_reg(d, 0xdd8b, frame_size >> 8); + if (ret) + goto error; + ret = af9015_write_reg(d, 0xdd0c, packet_size); /* EP4 packet size */ + if (ret) + goto error; + ret = af9015_write_reg(d, 0xdd0d, packet_size); /* EP5 packet size */ + if (ret) + goto error; + ret = af9015_clear_reg_bit(d, 0xd507, 2); /* negate EP4 reset */ + if (ret) + goto error; + if (af9015_config.dual_mode) { + ret = af9015_clear_reg_bit(d, 0xd50b, 1); /* negate EP5 reset */ + if (ret) + goto error; + } + + /* enable / disable mp2if2 */ + if (af9015_config.dual_mode) + ret = af9015_set_reg_bit(d, 0xd50b, 0); + else + ret = af9015_clear_reg_bit(d, 0xd50b, 0); +error: + if (ret) + err("endpoint init failed:%d", ret); + return ret; +} + +static int af9015_copy_firmware(struct dvb_usb_device *d) +{ + int ret; + u8 fw_params[4]; + u8 val, i; + struct req_t req = {COPY_FIRMWARE, 0, 0x5100, 0, 0, sizeof(fw_params), + fw_params }; + deb_info("%s:\n", __func__); + + fw_params[0] = af9015_config.firmware_size >> 8; + fw_params[1] = af9015_config.firmware_size & 0xff; + fw_params[2] = af9015_config.firmware_checksum >> 8; + fw_params[3] = af9015_config.firmware_checksum & 0xff; + + /* wait 2nd demodulator ready */ + msleep(100); + + ret = af9015_read_reg_i2c(d, 0x3a, 0x98be, &val); + if (ret) + goto error; + else + deb_info("%s: firmware status:%02x\n", __func__, val); + + if (val == 0x0c) /* fw is running, no need for download */ + goto exit; + + /* set I2C master clock to fast (to speed up firmware copy) */ + ret = af9015_write_reg(d, 0xd416, 0x04); /* 0x04 * 400ns */ + if (ret) + goto error; + + msleep(50); + + /* copy firmware */ + ret = af9015_ctrl_msg(d, &req); + if (ret) + err("firmware copy cmd failed:%d", ret); + deb_info("%s: firmware copy done\n", __func__); + + /* set I2C master clock back to normal */ + ret = af9015_write_reg(d, 0xd416, 0x14); /* 0x14 * 400ns */ + if (ret) + goto error; + + /* request boot firmware */ + ret = af9015_write_reg_i2c(d, af9015_af9013_config[1].demod_address, + 0xe205, 1); + deb_info("%s: firmware boot cmd status:%d\n", __func__, ret); + if (ret) + goto error; + + for (i = 0; i < 15; i++) { + msleep(100); + + /* check firmware status */ + ret = af9015_read_reg_i2c(d, + af9015_af9013_config[1].demod_address, 0x98be, &val); + deb_info("%s: firmware status cmd status:%d fw status:%02x\n", + __func__, ret, val); + if (ret) + goto error; + + if (val == 0x0c || val == 0x04) /* success or fail */ + break; + } + + if (val == 0x04) { + err("firmware did not run"); + ret = -1; + } else if (val != 0x0c) { + err("firmware boot timeout"); + ret = -1; + } + +error: +exit: + return ret; +} + +/* dump eeprom */ +static int af9015_eeprom_dump(struct dvb_usb_device *d) +{ + char buf[52], buf2[4]; + u8 reg, val; + + for (reg = 0; ; reg++) { + if (reg % 16 == 0) { + if (reg) + deb_info("%s\n", buf); + sprintf(buf, "%02x: ", reg); + } + if (af9015_read_reg_i2c(d, AF9015_I2C_EEPROM, reg, &val) == 0) + sprintf(buf2, "%02x ", val); + else + strcpy(buf2, "-- "); + strcat(buf, buf2); + if (reg == 0xff) + break; + } + deb_info("%s\n", buf); + return 0; +} + +int af9015_download_ir_table(struct dvb_usb_device *d) +{ + int i, packets = 0, ret; + u16 addr = 0x9a56; /* ir-table start address */ + struct req_t req = {WRITE_MEMORY, 0, 0, 0, 0, 1, NULL}; + u8 *data = NULL; + deb_info("%s:\n", __func__); + + data = af9015_config.ir_table; + packets = af9015_config.ir_table_size; + + /* no remote */ + if (!packets) + goto exit; + + /* load remote ir-table */ + for (i = 0; i < packets; i++) { + req.addr = addr + i; + req.data = &data[i]; + ret = af9015_ctrl_msg(d, &req); + if (ret) { + err("ir-table download failed at packet %d with " \ + "code %d", i, ret); + return ret; + } + } + +exit: + return 0; +} + +static int af9015_init(struct dvb_usb_device *d) +{ + int ret; + deb_info("%s:\n", __func__); + + ret = af9015_init_endpoint(d); + if (ret) + goto error; + + ret = af9015_download_ir_table(d); + if (ret) + goto error; + +error: + return ret; +} + +static int af9015_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff) +{ + int ret; + deb_info("%s: onoff:%d\n", __func__, onoff); + + if (onoff) + ret = af9015_set_reg_bit(adap->dev, 0xd503, 0); + else + ret = af9015_clear_reg_bit(adap->dev, 0xd503, 0); + + return ret; +} + +static int af9015_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, + int onoff) +{ + int ret; + u8 idx; + + deb_info("%s: set pid filter, index %d, pid %x, onoff %d\n", + __func__, index, pid, onoff); + + ret = af9015_write_reg(adap->dev, 0xd505, (pid & 0xff)); + if (ret) + goto error; + + ret = af9015_write_reg(adap->dev, 0xd506, (pid >> 8)); + if (ret) + goto error; + + idx = ((index & 0x1f) | (1 << 5)); + ret = af9015_write_reg(adap->dev, 0xd504, idx); + +error: + return ret; +} + +static int af9015_download_firmware(struct usb_device *udev, + const struct firmware *fw) +{ + int i, len, packets, remainder, ret; + struct req_t req = {DOWNLOAD_FIRMWARE, 0, 0, 0, 0, 0, NULL}; + u16 addr = 0x5100; /* firmware start address */ + u16 checksum = 0; + + deb_info("%s:\n", __func__); + + /* calc checksum */ + for (i = 0; i < fw->size; i++) + checksum += fw->data[i]; + + af9015_config.firmware_size = fw->size; + af9015_config.firmware_checksum = checksum; + + #define FW_PACKET_MAX_DATA 55 + + packets = fw->size / FW_PACKET_MAX_DATA; + remainder = fw->size % FW_PACKET_MAX_DATA; + len = FW_PACKET_MAX_DATA; + for (i = 0; i <= packets; i++) { + if (i == packets) /* set size of the last packet */ + len = remainder; + + req.data_len = len; + req.data = (fw->data + i * FW_PACKET_MAX_DATA); + req.addr = addr; + addr += FW_PACKET_MAX_DATA; + + ret = af9015_rw_udev(udev, &req); + if (ret) { + err("firmware download failed at packet %d with " \ + "code %d", i, ret); + goto error; + } + } + #undef FW_PACKET_MAX_DATA + + /* firmware loaded, request boot */ + req.cmd = BOOT; + ret = af9015_rw_udev(udev, &req); + if (ret) { + err("firmware boot failed:%d", ret); + goto error; + } + + /* firmware is running, reconnect device in the usb bus */ + req.cmd = RECONNECT_USB; + ret = af9015_rw_udev(udev, &req); + if (ret) + err("reconnect failed: %d", ret); + +error: + return ret; +} + +static int af9015_read_config(struct usb_device *udev) +{ + int ret; + u8 val, i, offset = 0; + struct req_t req = {READ_I2C, AF9015_I2C_EEPROM, 0, 0, 1, 1, &val}; + char manufacturer[10]; + + /* IR remote controller */ + req.addr = AF9015_EEPROM_IR_MODE; + ret = af9015_rw_udev(udev, &req); + if (ret) + goto error; + deb_info("%s: IR mode:%d\n", __func__, val); + for (i = 0; i < af9015_properties_count; i++) { + if (val == AF9015_IR_MODE_DISABLED || val == 0x04) { + af9015_properties[i].rc_key_map = NULL; + af9015_properties[i].rc_key_map_size = 0; + } else if (dvb_usb_af9015_remote) { + /* load remote defined as module param */ + switch (dvb_usb_af9015_remote) { + case AF9015_REMOTE_A_LINK_DTU_M: + af9015_properties[i].rc_key_map = + af9015_rc_keys_a_link; + af9015_properties[i].rc_key_map_size = + ARRAY_SIZE(af9015_rc_keys_a_link); + af9015_config.ir_table = af9015_ir_table_a_link; + af9015_config.ir_table_size = + ARRAY_SIZE(af9015_ir_table_a_link); + break; + case AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3: + af9015_properties[i].rc_key_map = + af9015_rc_keys_msi; + af9015_properties[i].rc_key_map_size = + ARRAY_SIZE(af9015_rc_keys_msi); + af9015_config.ir_table = af9015_ir_table_msi; + af9015_config.ir_table_size = + ARRAY_SIZE(af9015_ir_table_msi); + break; + case AF9015_REMOTE_MYGICTV_U718: + af9015_properties[i].rc_key_map = + af9015_rc_keys_mygictv; + af9015_properties[i].rc_key_map_size = + ARRAY_SIZE(af9015_rc_keys_mygictv); + af9015_config.ir_table = + af9015_ir_table_mygictv; + af9015_config.ir_table_size = + ARRAY_SIZE(af9015_ir_table_mygictv); + break; + } + } else { + switch (udev->descriptor.idVendor) { + case cpu_to_le16(USB_VID_LEADTEK): + af9015_properties[i].rc_key_map = + af9015_rc_keys_leadtek; + af9015_properties[i].rc_key_map_size = + ARRAY_SIZE(af9015_rc_keys_leadtek); + af9015_config.ir_table = + af9015_ir_table_leadtek; + af9015_config.ir_table_size = + ARRAY_SIZE(af9015_ir_table_leadtek); + break; + case cpu_to_le16(USB_VID_VISIONPLUS): + if (udev->descriptor.idProduct == + cpu_to_le16(USB_PID_AZUREWAVE_AD_TU700)) { + af9015_properties[i].rc_key_map = + af9015_rc_keys_twinhan; + af9015_properties[i].rc_key_map_size = + ARRAY_SIZE(af9015_rc_keys_twinhan); + af9015_config.ir_table = + af9015_ir_table_twinhan; + af9015_config.ir_table_size = + ARRAY_SIZE(af9015_ir_table_twinhan); + } + break; + case cpu_to_le16(USB_VID_KWORLD_2): + /* TODO: use correct rc keys */ + af9015_properties[i].rc_key_map = + af9015_rc_keys_twinhan; + af9015_properties[i].rc_key_map_size = + ARRAY_SIZE(af9015_rc_keys_twinhan); + af9015_config.ir_table = af9015_ir_table_kworld; + af9015_config.ir_table_size = + ARRAY_SIZE(af9015_ir_table_kworld); + break; + /* Check USB manufacturer and product strings and try + to determine correct remote in case of chip vendor + reference IDs are used. */ + case cpu_to_le16(USB_VID_AFATECH): + memset(manufacturer, 0, sizeof(manufacturer)); + usb_string(udev, udev->descriptor.iManufacturer, + manufacturer, sizeof(manufacturer)); + if (!strcmp("Geniatech", manufacturer)) { + /* iManufacturer 1 Geniatech + iProduct 2 AF9015 */ + af9015_properties[i].rc_key_map = + af9015_rc_keys_mygictv; + af9015_properties[i].rc_key_map_size = + ARRAY_SIZE(af9015_rc_keys_mygictv); + af9015_config.ir_table = + af9015_ir_table_mygictv; + af9015_config.ir_table_size = + ARRAY_SIZE(af9015_ir_table_mygictv); + } else if (!strcmp("MSI", manufacturer)) { + /* iManufacturer 1 MSI + iProduct 2 MSI K-VOX */ + af9015_properties[i].rc_key_map = + af9015_rc_keys_msi; + af9015_properties[i].rc_key_map_size = + ARRAY_SIZE(af9015_rc_keys_msi); + af9015_config.ir_table = + af9015_ir_table_msi; + af9015_config.ir_table_size = + ARRAY_SIZE(af9015_ir_table_msi); + } + break; + } + } + } + + /* TS mode - one or two receivers */ + req.addr = AF9015_EEPROM_TS_MODE; + ret = af9015_rw_udev(udev, &req); + if (ret) + goto error; + af9015_config.dual_mode = val; + deb_info("%s: TS mode:%d\n", __func__, af9015_config.dual_mode); + /* disable dual mode by default because it is buggy */ + if (!dvb_usb_af9015_dual_mode) + af9015_config.dual_mode = 0; + + /* set buffer size according to USB port speed */ + for (i = 0; i < af9015_properties_count; i++) { + /* USB1.1 set smaller buffersize and disable 2nd adapter */ + if (udev->speed == USB_SPEED_FULL) { + af9015_properties[i].adapter->stream.u.bulk.buffersize = + TS_USB11_MAX_PACKET_SIZE; + /* disable 2nd adapter because we don't have + PID-filters */ + af9015_config.dual_mode = 0; + } else { + af9015_properties[i].adapter->stream.u.bulk.buffersize = + TS_USB20_MAX_PACKET_SIZE; + } + } + + if (af9015_config.dual_mode) { + /* read 2nd demodulator I2C address */ + req.addr = AF9015_EEPROM_DEMOD2_I2C; + ret = af9015_rw_udev(udev, &req); + if (ret) + goto error; + af9015_af9013_config[1].demod_address = val; + + /* enable 2nd adapter */ + for (i = 0; i < af9015_properties_count; i++) + af9015_properties[i].num_adapters = 2; + + } else { + /* disable 2nd adapter */ + for (i = 0; i < af9015_properties_count; i++) + af9015_properties[i].num_adapters = 1; + } + + for (i = 0; i < af9015_properties[0].num_adapters; i++) { + if (i == 1) + offset = AF9015_EEPROM_OFFSET; + /* xtal */ + req.addr = AF9015_EEPROM_XTAL_TYPE1 + offset; + ret = af9015_rw_udev(udev, &req); + if (ret) + goto error; + switch (val) { + case 0: + af9015_af9013_config[i].adc_clock = 28800; + break; + case 1: + af9015_af9013_config[i].adc_clock = 20480; + break; + case 2: + af9015_af9013_config[i].adc_clock = 28000; + break; + case 3: + af9015_af9013_config[i].adc_clock = 25000; + break; + }; + deb_info("%s: [%d] xtal:%d set adc_clock:%d\n", __func__, i, + val, af9015_af9013_config[i].adc_clock); + + /* tuner IF */ + req.addr = AF9015_EEPROM_IF1H + offset; + ret = af9015_rw_udev(udev, &req); + if (ret) + goto error; + af9015_af9013_config[i].tuner_if = val << 8; + req.addr = AF9015_EEPROM_IF1L + offset; + ret = af9015_rw_udev(udev, &req); + if (ret) + goto error; + af9015_af9013_config[i].tuner_if += val; + deb_info("%s: [%d] IF1:%d\n", __func__, i, + af9015_af9013_config[0].tuner_if); + + /* MT2060 IF1 */ + req.addr = AF9015_EEPROM_MT2060_IF1H + offset; + ret = af9015_rw_udev(udev, &req); + if (ret) + goto error; + af9015_config.mt2060_if1[i] = val << 8; + req.addr = AF9015_EEPROM_MT2060_IF1L + offset; + ret = af9015_rw_udev(udev, &req); + if (ret) + goto error; + af9015_config.mt2060_if1[i] += val; + deb_info("%s: [%d] MT2060 IF1:%d\n", __func__, i, + af9015_config.mt2060_if1[i]); + + /* tuner */ + req.addr = AF9015_EEPROM_TUNER_ID1 + offset; + ret = af9015_rw_udev(udev, &req); + if (ret) + goto error; + switch (val) { + case AF9013_TUNER_ENV77H11D5: + case AF9013_TUNER_MT2060: + case AF9013_TUNER_MC44S803: + case AF9013_TUNER_QT1010: + case AF9013_TUNER_UNKNOWN: + case AF9013_TUNER_MT2060_2: + case AF9013_TUNER_TDA18271: + case AF9013_TUNER_QT1010A: + af9015_af9013_config[i].rf_spec_inv = 1; + break; + case AF9013_TUNER_MXL5003D: + case AF9013_TUNER_MXL5005D: + case AF9013_TUNER_MXL5005R: + af9015_af9013_config[i].rf_spec_inv = 0; + break; + default: + warn("tuner id:%d not supported, please report!", val); + return -ENODEV; + }; + + af9015_af9013_config[i].tuner = val; + deb_info("%s: [%d] tuner id:%d\n", __func__, i, val); + } + +error: + if (ret) + err("eeprom read failed:%d", ret); + + return ret; +} + +static int af9015_identify_state(struct usb_device *udev, + struct dvb_usb_device_properties *props, + struct dvb_usb_device_description **desc, + int *cold) +{ + int ret; + u8 reply; + struct req_t req = {GET_CONFIG, 0, 0, 0, 0, 1, &reply}; + + ret = af9015_rw_udev(udev, &req); + if (ret) + return ret; + + deb_info("%s: reply:%02x\n", __func__, reply); + if (reply == 0x02) + *cold = 0; + else + *cold = 1; + + return ret; +} + +static int af9015_rc_query(struct dvb_usb_device *d, u32 *event, int *state) +{ + u8 buf[8]; + struct req_t req = {GET_IR_CODE, 0, 0, 0, 0, sizeof(buf), buf}; + struct dvb_usb_rc_key *keymap = d->props.rc_key_map; + int i, ret; + + memset(buf, 0, sizeof(buf)); + + ret = af9015_ctrl_msg(d, &req); + if (ret) + return ret; + + *event = 0; + *state = REMOTE_NO_KEY_PRESSED; + + for (i = 0; i < d->props.rc_key_map_size; i++) { + if (!buf[1] && keymap[i].custom == buf[0] && + keymap[i].data == buf[2]) { + *event = keymap[i].event; + *state = REMOTE_KEY_PRESSED; + break; + } + } + if (!buf[1]) + deb_rc("%s: %02x %02x %02x %02x %02x %02x %02x %02x\n", + __func__, buf[0], buf[1], buf[2], buf[3], buf[4], + buf[5], buf[6], buf[7]); + + return 0; +} + +/* init 2nd I2C adapter */ +int af9015_i2c_init(struct dvb_usb_device *d) +{ + int ret; + struct af9015_state *state = d->priv; + deb_info("%s:\n", __func__); + + strncpy(state->i2c_adap.name, d->desc->name, + sizeof(state->i2c_adap.name)); +#ifdef I2C_ADAP_CLASS_TV_DIGITAL + state->i2c_adap.class = I2C_ADAP_CLASS_TV_DIGITAL, +#else + state->i2c_adap.class = I2C_CLASS_TV_DIGITAL, +#endif + state->i2c_adap.algo = d->props.i2c_algo; + state->i2c_adap.algo_data = NULL; + state->i2c_adap.dev.parent = &d->udev->dev; + + i2c_set_adapdata(&state->i2c_adap, d); + + ret = i2c_add_adapter(&state->i2c_adap); + if (ret < 0) + err("could not add i2c adapter"); + + return ret; +} + +static int af9015_af9013_frontend_attach(struct dvb_usb_adapter *adap) +{ + int ret; + struct af9015_state *state = adap->dev->priv; + struct i2c_adapter *i2c_adap; + + if (adap->id == 0) { + /* select I2C adapter */ + i2c_adap = &adap->dev->i2c_adap; + + deb_info("%s: init I2C\n", __func__); + ret = af9015_i2c_init(adap->dev); + + /* dump eeprom (debug) */ + ret = af9015_eeprom_dump(adap->dev); + if (ret) + return ret; + } else { + /* select I2C adapter */ + i2c_adap = &state->i2c_adap; + + /* copy firmware to 2nd demodulator */ + if (af9015_config.dual_mode) { + ret = af9015_copy_firmware(adap->dev); + if (ret) { + err("firmware copy to 2nd frontend " \ + "failed, will disable it"); + af9015_config.dual_mode = 0; + return -ENODEV; + } + } else { + return -ENODEV; + } + } + + /* attach demodulator */ + adap->fe = dvb_attach(af9013_attach, &af9015_af9013_config[adap->id], + i2c_adap); + + return adap->fe == NULL ? -ENODEV : 0; +} + +static struct mt2060_config af9015_mt2060_config = { + .i2c_address = 0xc0, + .clock_out = 0, +}; + +static struct qt1010_config af9015_qt1010_config = { + .i2c_address = 0xc4, +}; + +static struct tda18271_config af9015_tda18271_config = { + .gate = TDA18271_GATE_DIGITAL, + .small_i2c = 1, +}; + +static struct mxl5005s_config af9015_mxl5003_config = { + .i2c_address = 0xc6, + .if_freq = IF_FREQ_4570000HZ, + .xtal_freq = CRYSTAL_FREQ_16000000HZ, + .agc_mode = MXL_SINGLE_AGC, + .tracking_filter = MXL_TF_DEFAULT, + .rssi_enable = MXL_RSSI_DISABLE, + .cap_select = MXL_CAP_SEL_ENABLE, + .div_out = MXL_DIV_OUT_4, + .clock_out = MXL_CLOCK_OUT_DISABLE, + .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM, + .top = MXL5005S_TOP_25P2, + .mod_mode = MXL_DIGITAL_MODE, + .if_mode = MXL_ZERO_IF, + .AgcMasterByte = 0x00, +}; + +static struct mxl5005s_config af9015_mxl5005_config = { + .i2c_address = 0xc6, + .if_freq = IF_FREQ_4570000HZ, + .xtal_freq = CRYSTAL_FREQ_16000000HZ, + .agc_mode = MXL_SINGLE_AGC, + .tracking_filter = MXL_TF_OFF, + .rssi_enable = MXL_RSSI_DISABLE, + .cap_select = MXL_CAP_SEL_ENABLE, + .div_out = MXL_DIV_OUT_4, + .clock_out = MXL_CLOCK_OUT_DISABLE, + .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM, + .top = MXL5005S_TOP_25P2, + .mod_mode = MXL_DIGITAL_MODE, + .if_mode = MXL_ZERO_IF, + .AgcMasterByte = 0x00, +}; + +static int af9015_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct af9015_state *state = adap->dev->priv; + struct i2c_adapter *i2c_adap; + int ret; + deb_info("%s: \n", __func__); + + /* select I2C adapter */ + if (adap->id == 0) + i2c_adap = &adap->dev->i2c_adap; + else + i2c_adap = &state->i2c_adap; + + switch (af9015_af9013_config[adap->id].tuner) { + case AF9013_TUNER_MT2060: + case AF9013_TUNER_MT2060_2: + ret = dvb_attach(mt2060_attach, adap->fe, i2c_adap, + &af9015_mt2060_config, + af9015_config.mt2060_if1[adap->id]) + == NULL ? -ENODEV : 0; + break; + case AF9013_TUNER_QT1010: + case AF9013_TUNER_QT1010A: + ret = dvb_attach(qt1010_attach, adap->fe, i2c_adap, + &af9015_qt1010_config) == NULL ? -ENODEV : 0; + break; + case AF9013_TUNER_TDA18271: + ret = dvb_attach(tda18271_attach, adap->fe, 0xc0, i2c_adap, + &af9015_tda18271_config) == NULL ? -ENODEV : 0; + break; + case AF9013_TUNER_MXL5003D: + ret = dvb_attach(mxl5005s_attach, adap->fe, i2c_adap, + &af9015_mxl5003_config) == NULL ? -ENODEV : 0; + break; + case AF9013_TUNER_MXL5005D: + case AF9013_TUNER_MXL5005R: + ret = dvb_attach(mxl5005s_attach, adap->fe, i2c_adap, + &af9015_mxl5005_config) == NULL ? -ENODEV : 0; + break; + case AF9013_TUNER_ENV77H11D5: + ret = dvb_attach(dvb_pll_attach, adap->fe, 0xc0, i2c_adap, + DVB_PLL_TDA665X) == NULL ? -ENODEV : 0; + break; + case AF9013_TUNER_MC44S803: +#if 0 + ret = dvb_attach(mc44s80x_attach, adap->fe, i2c_adap) + == NULL ? -ENODEV : 0; +#else + ret = -ENODEV; + info("Freescale MC44S803 tuner found but no driver for that" \ + "tuner. Look at the Linuxtv.org for tuner driver" \ + "status."); +#endif + break; + case AF9013_TUNER_UNKNOWN: + default: + ret = -ENODEV; + err("Unknown tuner id:%d", + af9015_af9013_config[adap->id].tuner); + } + return ret; +} + +static struct usb_device_id af9015_usb_table[] = { +/* 0 */{USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9015_9015)}, + {USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9015_9016)}, + {USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_GOLD)}, + {USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV71E)}, + {USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_399U)}, +/* 5 */{USB_DEVICE(USB_VID_VISIONPLUS, + USB_PID_TINYTWIN)}, + {USB_DEVICE(USB_VID_VISIONPLUS, + USB_PID_AZUREWAVE_AD_TU700)}, + {USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_USB_XE_REV2)}, + {USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_PC160_2T)}, + {USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_X)}, +/* 10 */{USB_DEVICE(USB_VID_XTENSIONS, USB_PID_XTENSIONS_XD_380)}, + {USB_DEVICE(USB_VID_MSI_2, USB_PID_MSI_DIGIVOX_DUO)}, + {USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_X_2)}, + {0}, +}; +MODULE_DEVICE_TABLE(usb, af9015_usb_table); + +static struct dvb_usb_device_properties af9015_properties[] = { + { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = DEVICE_SPECIFIC, + .download_firmware = af9015_download_firmware, + .firmware = "dvb-usb-af9015.fw", + + .size_of_priv = sizeof(struct af9015_state), \ + + .num_adapters = 2, + .adapter = { + { + .caps = DVB_USB_ADAP_HAS_PID_FILTER | + DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + + .pid_filter_count = 32, + .pid_filter = af9015_pid_filter, + .pid_filter_ctrl = af9015_pid_filter_ctrl, + + .frontend_attach = + af9015_af9013_frontend_attach, + .tuner_attach = af9015_tuner_attach, + .stream = { + .type = USB_BULK, + .count = 6, + .endpoint = 0x84, + }, + }, + { + .frontend_attach = + af9015_af9013_frontend_attach, + .tuner_attach = af9015_tuner_attach, + .stream = { + .type = USB_BULK, + .count = 6, + .endpoint = 0x85, + }, + } + }, + + .identify_state = af9015_identify_state, + + .rc_query = af9015_rc_query, + .rc_interval = 150, + + .i2c_algo = &af9015_i2c_algo, + + .num_device_descs = 9, + .devices = { + { + .name = "Afatech AF9015 DVB-T USB2.0 stick", + .cold_ids = {&af9015_usb_table[0], + &af9015_usb_table[1], NULL}, + .warm_ids = {NULL}, + }, + { + .name = "Leadtek WinFast DTV Dongle Gold", + .cold_ids = {&af9015_usb_table[2], NULL}, + .warm_ids = {NULL}, + }, + { + .name = "Pinnacle PCTV 71e", + .cold_ids = {&af9015_usb_table[3], NULL}, + .warm_ids = {NULL}, + }, + { + .name = "KWorld PlusTV Dual DVB-T Stick " \ + "(DVB-T 399U)", + .cold_ids = {&af9015_usb_table[4], NULL}, + .warm_ids = {NULL}, + }, + { + .name = "DigitalNow TinyTwin DVB-T Receiver", + .cold_ids = {&af9015_usb_table[5], NULL}, + .warm_ids = {NULL}, + }, + { + .name = "TwinHan AzureWave AD-TU700(704J)", + .cold_ids = {&af9015_usb_table[6], NULL}, + .warm_ids = {NULL}, + }, + { + .name = "TerraTec Cinergy T USB XE", + .cold_ids = {&af9015_usb_table[7], NULL}, + .warm_ids = {NULL}, + }, + { + .name = "KWorld PlusTV Dual DVB-T PCI " \ + "(DVB-T PC160-2T)", + .cold_ids = {&af9015_usb_table[8], NULL}, + .warm_ids = {NULL}, + }, + { + .name = "AVerMedia AVerTV DVB-T Volar X", + .cold_ids = {&af9015_usb_table[9], NULL}, + .warm_ids = {NULL}, + }, + } + }, { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = DEVICE_SPECIFIC, + .download_firmware = af9015_download_firmware, + .firmware = "dvb-usb-af9015.fw", + + .size_of_priv = sizeof(struct af9015_state), \ + + .num_adapters = 2, + .adapter = { + { + .caps = DVB_USB_ADAP_HAS_PID_FILTER | + DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + + .pid_filter_count = 32, + .pid_filter = af9015_pid_filter, + .pid_filter_ctrl = af9015_pid_filter_ctrl, + + .frontend_attach = + af9015_af9013_frontend_attach, + .tuner_attach = af9015_tuner_attach, + .stream = { + .type = USB_BULK, + .count = 6, + .endpoint = 0x84, + }, + }, + { + .frontend_attach = + af9015_af9013_frontend_attach, + .tuner_attach = af9015_tuner_attach, + .stream = { + .type = USB_BULK, + .count = 6, + .endpoint = 0x85, + }, + } + }, + + .identify_state = af9015_identify_state, + + .rc_query = af9015_rc_query, + .rc_interval = 150, + + .i2c_algo = &af9015_i2c_algo, + + .num_device_descs = 3, + .devices = { + { + .name = "Xtensions XD-380", + .cold_ids = {&af9015_usb_table[10], NULL}, + .warm_ids = {NULL}, + }, + { + .name = "MSI DIGIVOX Duo", + .cold_ids = {&af9015_usb_table[11], NULL}, + .warm_ids = {NULL}, + }, + { + .name = "Fujitsu-Siemens Slim Mobile USB DVB-T", + .cold_ids = {&af9015_usb_table[12], NULL}, + .warm_ids = {NULL}, + }, + } + } +}; +#undef AF9015_DEFAULT_PROPERTIES + +static int af9015_usb_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + int ret = 0; + struct dvb_usb_device *d = NULL; + struct usb_device *udev = interface_to_usbdev(intf); + u8 i; + + deb_info("%s: interface:%d\n", __func__, + intf->cur_altsetting->desc.bInterfaceNumber); + + /* interface 0 is used by DVB-T receiver and + interface 1 is for remote controller (HID) */ + if (intf->cur_altsetting->desc.bInterfaceNumber == 0) { + ret = af9015_read_config(udev); + if (ret) + return ret; + + for (i = 0; i < af9015_properties_count; i++) { + ret = dvb_usb_device_init(intf, &af9015_properties[i], + THIS_MODULE, &d, adapter_nr); + if (!ret) + break; + if (ret != -ENODEV) + return ret; + } + if (ret) + return ret; + + if (d) + ret = af9015_init(d); + } + + return ret; +} + +void af9015_i2c_exit(struct dvb_usb_device *d) +{ + struct af9015_state *state = d->priv; + deb_info("%s: \n", __func__); + + /* remove 2nd I2C adapter */ + if (d->state & DVB_USB_STATE_I2C) + i2c_del_adapter(&state->i2c_adap); +} + +static void af9015_usb_device_exit(struct usb_interface *intf) +{ + struct dvb_usb_device *d = usb_get_intfdata(intf); + deb_info("%s: \n", __func__); + + /* remove 2nd I2C adapter */ + if (d != NULL && d->desc != NULL) + af9015_i2c_exit(d); + + dvb_usb_device_exit(intf); +} + +/* usb specific object needed to register this driver with the usb subsystem */ +static struct usb_driver af9015_usb_driver = { + .name = "dvb_usb_af9015", + .probe = af9015_usb_probe, + .disconnect = af9015_usb_device_exit, + .id_table = af9015_usb_table, +}; + +/* module stuff */ +static int __init af9015_usb_module_init(void) +{ + int ret; + ret = usb_register(&af9015_usb_driver); + if (ret) + err("module init failed:%d", ret); + + return ret; +} + +static void __exit af9015_usb_module_exit(void) +{ + /* deregister this driver from the USB subsystem */ + usb_deregister(&af9015_usb_driver); +} + +module_init(af9015_usb_module_init); +module_exit(af9015_usb_module_exit); + +MODULE_AUTHOR("Antti Palosaari "); +MODULE_DESCRIPTION("Driver for Afatech AF9015 DVB-T"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/af9015.h b/drivers/media/dvb/dvb-usb/af9015.h new file mode 100644 index 000000000000..882e8a4b3681 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/af9015.h @@ -0,0 +1,524 @@ +/* + * DVB USB Linux driver for Afatech AF9015 DVB-T USB2.0 receiver + * + * Copyright (C) 2007 Antti Palosaari + * + * Thanks to Afatech who kindly provided information. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef _DVB_USB_AF9015_H_ +#define _DVB_USB_AF9015_H_ + +#define DVB_USB_LOG_PREFIX "af9015" +#include "dvb-usb.h" + +extern int dvb_usb_af9015_debug; +#define deb_info(args...) dprintk(dvb_usb_af9015_debug, 0x01, args) +#define deb_rc(args...) dprintk(dvb_usb_af9015_debug, 0x02, args) +#define deb_xfer(args...) dprintk(dvb_usb_af9015_debug, 0x04, args) +#define deb_reg(args...) dprintk(dvb_usb_af9015_debug, 0x08, args) +#define deb_i2c(args...) dprintk(dvb_usb_af9015_debug, 0x10, args) +#define deb_fw(args...) dprintk(dvb_usb_af9015_debug, 0x20, args) + +#define AF9015_I2C_EEPROM 0xa0 +#define AF9015_I2C_DEMOD 0x38 +#define AF9015_USB_TIMEOUT 2000 + +/* EEPROM locations */ +#define AF9015_EEPROM_IR_MODE 0x18 +#define AF9015_EEPROM_IR_REMOTE_TYPE 0x34 +#define AF9015_EEPROM_TS_MODE 0x31 +#define AF9015_EEPROM_DEMOD2_I2C 0x32 + +#define AF9015_EEPROM_SAW_BW1 0x35 +#define AF9015_EEPROM_XTAL_TYPE1 0x36 +#define AF9015_EEPROM_SPEC_INV1 0x37 +#define AF9015_EEPROM_IF1L 0x38 +#define AF9015_EEPROM_IF1H 0x39 +#define AF9015_EEPROM_MT2060_IF1L 0x3a +#define AF9015_EEPROM_MT2060_IF1H 0x3b +#define AF9015_EEPROM_TUNER_ID1 0x3c + +#define AF9015_EEPROM_SAW_BW2 0x45 +#define AF9015_EEPROM_XTAL_TYPE2 0x46 +#define AF9015_EEPROM_SPEC_INV2 0x47 +#define AF9015_EEPROM_IF2L 0x48 +#define AF9015_EEPROM_IF2H 0x49 +#define AF9015_EEPROM_MT2060_IF2L 0x4a +#define AF9015_EEPROM_MT2060_IF2H 0x4b +#define AF9015_EEPROM_TUNER_ID2 0x4c + +#define AF9015_EEPROM_OFFSET (AF9015_EEPROM_SAW_BW2 - AF9015_EEPROM_SAW_BW1) + +#define AF9015_GPIO_ON (1 << 0) +#define AF9015_GPIO_EN (1 << 1) +#define AF9015_GPIO_O (1 << 2) +#define AF9015_GPIO_I (1 << 3) + +#define AF9015_GPIO_TUNER_ON (AF9015_GPIO_ON|AF9015_GPIO_EN) +#define AF9015_GPIO_TUNER_OFF (AF9015_GPIO_ON|AF9015_GPIO_EN|AF9015_GPIO_O) + +struct req_t { + u8 cmd; /* [0] */ + /* seq */ /* [1] */ + u8 i2c_addr; /* [2] */ + u16 addr; /* [3|4] */ + u8 mbox; /* [5] */ + u8 addr_len; /* [6] */ + u8 data_len; /* [7] */ + u8 *data; +}; + +enum af9015_cmd { + GET_CONFIG = 0x10, + DOWNLOAD_FIRMWARE = 0x11, + BOOT = 0x13, + READ_MEMORY = 0x20, + WRITE_MEMORY = 0x21, + READ_WRITE_I2C = 0x22, + COPY_FIRMWARE = 0x23, + RECONNECT_USB = 0x5a, + WRITE_VIRTUAL_MEMORY = 0x26, + GET_IR_CODE = 0x27, + READ_I2C, + WRITE_I2C, +}; + +enum af9015_ir_mode { + AF9015_IR_MODE_DISABLED = 0, + AF9015_IR_MODE_HID, + AF9015_IR_MODE_RLC, + AF9015_IR_MODE_RC6, +}; + +struct af9015_state { + struct i2c_adapter i2c_adap; /* I2C adapter for 2nd FE */ +}; + +struct af9015_config { + u8 dual_mode:1; + u16 mt2060_if1[2]; + u16 firmware_size; + u16 firmware_checksum; + u8 *ir_table; + u16 ir_table_size; +}; + +enum af9015_remote { + AF9015_REMOTE_NONE = 0, + AF9015_REMOTE_A_LINK_DTU_M, + AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3, + AF9015_REMOTE_MYGICTV_U718, +}; + +/* Leadtek WinFast DTV Dongle Gold */ +static struct dvb_usb_rc_key af9015_rc_keys_leadtek[] = { + { 0x00, 0x1e, KEY_1 }, + { 0x00, 0x1f, KEY_2 }, + { 0x00, 0x20, KEY_3 }, + { 0x00, 0x21, KEY_4 }, + { 0x00, 0x22, KEY_5 }, + { 0x00, 0x23, KEY_6 }, + { 0x00, 0x24, KEY_7 }, + { 0x00, 0x25, KEY_8 }, + { 0x00, 0x26, KEY_9 }, + { 0x00, 0x27, KEY_0 }, + { 0x00, 0x28, KEY_ENTER }, + { 0x00, 0x4f, KEY_VOLUMEUP }, + { 0x00, 0x50, KEY_VOLUMEDOWN }, + { 0x00, 0x51, KEY_CHANNELDOWN }, + { 0x00, 0x52, KEY_CHANNELUP }, +}; + +static u8 af9015_ir_table_leadtek[] = { + 0x03, 0xfc, 0x00, 0xff, 0x1a, 0x01, 0x00, + 0x03, 0xfc, 0x56, 0xa9, 0x00, 0x00, 0x00, + 0x03, 0xfc, 0x4b, 0xb4, 0x00, 0x00, 0x00, + 0x03, 0xfc, 0x4c, 0xb3, 0xb2, 0x04, 0x00, + 0x03, 0xfc, 0x4d, 0xb2, 0x00, 0x00, 0x00, + 0x03, 0xfc, 0x4e, 0xb1, 0x00, 0x00, 0x00, + 0x03, 0xfc, 0x1f, 0xe0, 0x3d, 0x00, 0x00, + 0x03, 0xfc, 0x40, 0xbf, 0x13, 0x01, 0x00, + 0x03, 0xfc, 0x14, 0xeb, 0x10, 0x00, 0x00, + 0x03, 0xfc, 0x49, 0xb6, 0x05, 0x01, 0x00, + 0x03, 0xfc, 0x50, 0xaf, 0x29, 0x00, 0x00, + 0x03, 0xfc, 0x0c, 0xf3, 0x52, 0x00, 0x00, + 0x03, 0xfc, 0x03, 0xfc, 0x09, 0x00, 0x00, + 0x03, 0xfc, 0x08, 0xf7, 0x50, 0x00, 0x00, + 0x03, 0xfc, 0x13, 0xec, 0x28, 0x00, 0x00, + 0x03, 0xfc, 0x04, 0xfb, 0x4f, 0x00, 0x00, + 0x03, 0xfc, 0x4f, 0xb0, 0x0f, 0x01, 0x00, + 0x03, 0xfc, 0x10, 0xef, 0x51, 0x00, 0x00, + 0x03, 0xfc, 0x51, 0xae, 0x3f, 0x00, 0x00, + 0x03, 0xfc, 0x42, 0xbd, 0x13, 0x00, 0x00, + 0x03, 0xfc, 0x43, 0xbc, 0x00, 0x00, 0x00, + 0x03, 0xfc, 0x44, 0xbb, 0x11, 0x00, 0x00, + 0x03, 0xfc, 0x52, 0xad, 0x19, 0x00, 0x00, + 0x03, 0xfc, 0x54, 0xab, 0x05, 0x00, 0x00, + 0x03, 0xfc, 0x46, 0xb9, 0x29, 0x00, 0x00, + 0x03, 0xfc, 0x55, 0xaa, 0x2b, 0x00, 0x00, + 0x03, 0xfc, 0x53, 0xac, 0x41, 0x00, 0x00, + 0x03, 0xfc, 0x05, 0xfa, 0x1e, 0x00, 0x00, + 0x03, 0xfc, 0x06, 0xf9, 0x1f, 0x00, 0x00, + 0x03, 0xfc, 0x07, 0xf8, 0x20, 0x00, 0x00, + 0x03, 0xfc, 0x1e, 0xe1, 0x19, 0x00, 0x00, + 0x03, 0xfc, 0x09, 0xf6, 0x21, 0x00, 0x00, + 0x03, 0xfc, 0x0a, 0xf5, 0x22, 0x00, 0x00, + 0x03, 0xfc, 0x0b, 0xf4, 0x23, 0x00, 0x00, + 0x03, 0xfc, 0x1b, 0xe4, 0x16, 0x00, 0x00, + 0x03, 0xfc, 0x0d, 0xf2, 0x24, 0x00, 0x00, + 0x03, 0xfc, 0x0e, 0xf1, 0x25, 0x00, 0x00, + 0x03, 0xfc, 0x0f, 0xf0, 0x26, 0x00, 0x00, + 0x03, 0xfc, 0x16, 0xe9, 0x28, 0x00, 0x00, + 0x03, 0xfc, 0x41, 0xbe, 0x37, 0x00, 0x00, + 0x03, 0xfc, 0x12, 0xed, 0x27, 0x00, 0x00, + 0x03, 0xfc, 0x11, 0xee, 0x2a, 0x00, 0x00, + 0x03, 0xfc, 0x48, 0xb7, 0x2c, 0x00, 0x00, + 0x03, 0xfc, 0x4a, 0xb5, 0x3c, 0x00, 0x00, + 0x03, 0xfc, 0x47, 0xb8, 0x15, 0x01, 0x00, + 0x03, 0xfc, 0x45, 0xba, 0x0b, 0x01, 0x00, + 0x03, 0xfc, 0x5e, 0xa1, 0x43, 0x00, 0x00, + 0x03, 0xfc, 0x5a, 0xa5, 0x42, 0x00, 0x00, + 0x03, 0xfc, 0x5b, 0xa4, 0x4b, 0x00, 0x00, + 0x03, 0xfc, 0x5f, 0xa0, 0x4e, 0x00, 0x00, +}; + +/* TwinHan AzureWave AD-TU700(704J) */ +static struct dvb_usb_rc_key af9015_rc_keys_twinhan[] = { + { 0x05, 0x3f, KEY_POWER }, + { 0x00, 0x19, KEY_FAVORITES }, /* Favorite List */ + { 0x00, 0x04, KEY_TEXT }, /* Teletext */ + { 0x00, 0x0e, KEY_POWER }, + { 0x00, 0x0e, KEY_INFO }, /* Preview */ + { 0x00, 0x08, KEY_EPG }, /* Info/EPG */ + { 0x00, 0x0f, KEY_LIST }, /* Record List */ + { 0x00, 0x1e, KEY_1 }, + { 0x00, 0x1f, KEY_2 }, + { 0x00, 0x20, KEY_3 }, + { 0x00, 0x21, KEY_4 }, + { 0x00, 0x22, KEY_5 }, + { 0x00, 0x23, KEY_6 }, + { 0x00, 0x24, KEY_7 }, + { 0x00, 0x25, KEY_8 }, + { 0x00, 0x26, KEY_9 }, + { 0x00, 0x27, KEY_0 }, + { 0x00, 0x29, KEY_CANCEL }, /* Cancel */ + { 0x00, 0x4c, KEY_CLEAR }, /* Clear */ + { 0x00, 0x2a, KEY_BACK }, /* Back */ + { 0x00, 0x2b, KEY_TAB }, /* Tab */ + { 0x00, 0x52, KEY_UP }, /* up arrow */ + { 0x00, 0x51, KEY_DOWN }, /* down arrow */ + { 0x00, 0x4f, KEY_RIGHT }, /* right arrow */ + { 0x00, 0x50, KEY_LEFT }, /* left arrow */ + { 0x00, 0x28, KEY_ENTER }, /* Enter / ok */ + { 0x02, 0x52, KEY_VOLUMEUP }, + { 0x02, 0x51, KEY_VOLUMEDOWN }, + { 0x00, 0x4e, KEY_CHANNELDOWN }, + { 0x00, 0x4b, KEY_CHANNELUP }, + { 0x00, 0x4a, KEY_RECORD }, + { 0x01, 0x11, KEY_PLAY }, + { 0x00, 0x17, KEY_PAUSE }, + { 0x00, 0x0c, KEY_REWIND }, /* FR << */ + { 0x00, 0x11, KEY_FASTFORWARD }, /* FF >> */ + { 0x01, 0x15, KEY_PREVIOUS }, /* Replay */ + { 0x01, 0x0e, KEY_NEXT }, /* Skip */ + { 0x00, 0x13, KEY_CAMERA }, /* Capture */ + { 0x01, 0x0f, KEY_LANGUAGE }, /* SAP */ + { 0x01, 0x13, KEY_TV2 }, /* PIP */ + { 0x00, 0x1d, KEY_ZOOM }, /* Full Screen */ + { 0x01, 0x17, KEY_SUBTITLE }, /* Subtitle / CC */ + { 0x00, 0x10, KEY_MUTE }, + { 0x01, 0x19, KEY_AUDIO }, /* L/R */ /* TODO better event */ + { 0x01, 0x16, KEY_SLEEP }, /* Hibernate */ + { 0x01, 0x16, KEY_SWITCHVIDEOMODE }, + /* A/V */ /* TODO does not work */ + { 0x00, 0x06, KEY_AGAIN }, /* Recall */ + { 0x01, 0x16, KEY_KPPLUS }, /* Zoom+ */ /* TODO does not work */ + { 0x01, 0x16, KEY_KPMINUS }, /* Zoom- */ /* TODO does not work */ + { 0x02, 0x15, KEY_RED }, + { 0x02, 0x0a, KEY_GREEN }, + { 0x02, 0x1c, KEY_YELLOW }, + { 0x02, 0x05, KEY_BLUE }, +}; + +static u8 af9015_ir_table_twinhan[] = { + 0x00, 0xff, 0x16, 0xe9, 0x3f, 0x05, 0x00, + 0x00, 0xff, 0x07, 0xf8, 0x16, 0x01, 0x00, + 0x00, 0xff, 0x14, 0xeb, 0x11, 0x01, 0x00, + 0x00, 0xff, 0x1a, 0xe5, 0x4d, 0x00, 0x00, + 0x00, 0xff, 0x4c, 0xb3, 0x17, 0x00, 0x00, + 0x00, 0xff, 0x12, 0xed, 0x11, 0x00, 0x00, + 0x00, 0xff, 0x40, 0xbf, 0x0c, 0x00, 0x00, + 0x00, 0xff, 0x11, 0xee, 0x4a, 0x00, 0x00, + 0x00, 0xff, 0x54, 0xab, 0x13, 0x00, 0x00, + 0x00, 0xff, 0x41, 0xbe, 0x15, 0x01, 0x00, + 0x00, 0xff, 0x42, 0xbd, 0x0e, 0x01, 0x00, + 0x00, 0xff, 0x43, 0xbc, 0x17, 0x01, 0x00, + 0x00, 0xff, 0x50, 0xaf, 0x0f, 0x01, 0x00, + 0x00, 0xff, 0x4d, 0xb2, 0x1d, 0x00, 0x00, + 0x00, 0xff, 0x47, 0xb8, 0x13, 0x01, 0x00, + 0x00, 0xff, 0x05, 0xfa, 0x4b, 0x00, 0x00, + 0x00, 0xff, 0x02, 0xfd, 0x4e, 0x00, 0x00, + 0x00, 0xff, 0x0e, 0xf1, 0x06, 0x00, 0x00, + 0x00, 0xff, 0x1e, 0xe1, 0x52, 0x02, 0x00, + 0x00, 0xff, 0x0a, 0xf5, 0x51, 0x02, 0x00, + 0x00, 0xff, 0x10, 0xef, 0x10, 0x00, 0x00, + 0x00, 0xff, 0x49, 0xb6, 0x19, 0x01, 0x00, + 0x00, 0xff, 0x15, 0xea, 0x27, 0x00, 0x00, + 0x00, 0xff, 0x03, 0xfc, 0x1e, 0x00, 0x00, + 0x00, 0xff, 0x01, 0xfe, 0x1f, 0x00, 0x00, + 0x00, 0xff, 0x06, 0xf9, 0x20, 0x00, 0x00, + 0x00, 0xff, 0x09, 0xf6, 0x21, 0x00, 0x00, + 0x00, 0xff, 0x1d, 0xe2, 0x22, 0x00, 0x00, + 0x00, 0xff, 0x1f, 0xe0, 0x23, 0x00, 0x00, + 0x00, 0xff, 0x0d, 0xf2, 0x24, 0x00, 0x00, + 0x00, 0xff, 0x19, 0xe6, 0x25, 0x00, 0x00, + 0x00, 0xff, 0x1b, 0xe4, 0x26, 0x00, 0x00, + 0x00, 0xff, 0x00, 0xff, 0x2b, 0x00, 0x00, + 0x00, 0xff, 0x4a, 0xb5, 0x4c, 0x00, 0x00, + 0x00, 0xff, 0x4b, 0xb4, 0x52, 0x00, 0x00, + 0x00, 0xff, 0x51, 0xae, 0x51, 0x00, 0x00, + 0x00, 0xff, 0x52, 0xad, 0x4f, 0x00, 0x00, + 0x00, 0xff, 0x4e, 0xb1, 0x50, 0x00, 0x00, + 0x00, 0xff, 0x0c, 0xf3, 0x29, 0x00, 0x00, + 0x00, 0xff, 0x4f, 0xb0, 0x28, 0x00, 0x00, + 0x00, 0xff, 0x13, 0xec, 0x2a, 0x00, 0x00, + 0x00, 0xff, 0x17, 0xe8, 0x19, 0x00, 0x00, + 0x00, 0xff, 0x04, 0xfb, 0x0f, 0x00, 0x00, + 0x00, 0xff, 0x48, 0xb7, 0x0e, 0x00, 0x00, + 0x00, 0xff, 0x0f, 0xf0, 0x04, 0x00, 0x00, + 0x00, 0xff, 0x1c, 0xe3, 0x08, 0x00, 0x00, + 0x00, 0xff, 0x18, 0xe7, 0x15, 0x02, 0x00, + 0x00, 0xff, 0x53, 0xac, 0x0a, 0x02, 0x00, + 0x00, 0xff, 0x5e, 0xa1, 0x1c, 0x02, 0x00, + 0x00, 0xff, 0x5f, 0xa0, 0x05, 0x02, 0x00, +}; + +/* A-Link DTU(m) */ +static struct dvb_usb_rc_key af9015_rc_keys_a_link[] = { + { 0x00, 0x1e, KEY_1 }, + { 0x00, 0x1f, KEY_2 }, + { 0x00, 0x20, KEY_3 }, + { 0x00, 0x21, KEY_4 }, + { 0x00, 0x22, KEY_5 }, + { 0x00, 0x23, KEY_6 }, + { 0x00, 0x24, KEY_7 }, + { 0x00, 0x25, KEY_8 }, + { 0x00, 0x26, KEY_9 }, + { 0x00, 0x27, KEY_0 }, + { 0x00, 0x2e, KEY_CHANNELUP }, + { 0x00, 0x2d, KEY_CHANNELDOWN }, + { 0x04, 0x28, KEY_ZOOM }, + { 0x00, 0x41, KEY_MUTE }, + { 0x00, 0x42, KEY_VOLUMEDOWN }, + { 0x00, 0x43, KEY_VOLUMEUP }, + { 0x00, 0x44, KEY_GOTO }, /* jump */ + { 0x05, 0x45, KEY_POWER }, +}; + +static u8 af9015_ir_table_a_link[] = { + 0x08, 0xf7, 0x12, 0xed, 0x45, 0x05, 0x00, /* power */ + 0x08, 0xf7, 0x1a, 0xe5, 0x41, 0x00, 0x00, /* mute */ + 0x08, 0xf7, 0x01, 0xfe, 0x1e, 0x00, 0x00, /* 1 */ + 0x08, 0xf7, 0x1c, 0xe3, 0x21, 0x00, 0x00, /* 4 */ + 0x08, 0xf7, 0x03, 0xfc, 0x24, 0x00, 0x00, /* 7 */ + 0x08, 0xf7, 0x05, 0xfa, 0x28, 0x04, 0x00, /* zoom */ + 0x08, 0xf7, 0x00, 0xff, 0x43, 0x00, 0x00, /* volume up */ + 0x08, 0xf7, 0x16, 0xe9, 0x42, 0x00, 0x00, /* volume down */ + 0x08, 0xf7, 0x0f, 0xf0, 0x1f, 0x00, 0x00, /* 2 */ + 0x08, 0xf7, 0x0d, 0xf2, 0x22, 0x00, 0x00, /* 5 */ + 0x08, 0xf7, 0x1b, 0xe4, 0x25, 0x00, 0x00, /* 8 */ + 0x08, 0xf7, 0x06, 0xf9, 0x27, 0x00, 0x00, /* 0 */ + 0x08, 0xf7, 0x14, 0xeb, 0x2e, 0x00, 0x00, /* channel up */ + 0x08, 0xf7, 0x1d, 0xe2, 0x2d, 0x00, 0x00, /* channel down */ + 0x08, 0xf7, 0x02, 0xfd, 0x20, 0x00, 0x00, /* 3 */ + 0x08, 0xf7, 0x18, 0xe7, 0x23, 0x00, 0x00, /* 6 */ + 0x08, 0xf7, 0x04, 0xfb, 0x26, 0x00, 0x00, /* 9 */ + 0x08, 0xf7, 0x07, 0xf8, 0x44, 0x00, 0x00, /* jump */ +}; + +/* MSI DIGIVOX mini II V3.0 */ +static struct dvb_usb_rc_key af9015_rc_keys_msi[] = { + { 0x00, 0x1e, KEY_1 }, + { 0x00, 0x1f, KEY_2 }, + { 0x00, 0x20, KEY_3 }, + { 0x00, 0x21, KEY_4 }, + { 0x00, 0x22, KEY_5 }, + { 0x00, 0x23, KEY_6 }, + { 0x00, 0x24, KEY_7 }, + { 0x00, 0x25, KEY_8 }, + { 0x00, 0x26, KEY_9 }, + { 0x00, 0x27, KEY_0 }, + { 0x03, 0x0f, KEY_CHANNELUP }, + { 0x03, 0x0e, KEY_CHANNELDOWN }, + { 0x00, 0x42, KEY_VOLUMEDOWN }, + { 0x00, 0x43, KEY_VOLUMEUP }, + { 0x05, 0x45, KEY_POWER }, + { 0x00, 0x52, KEY_UP }, /* up */ + { 0x00, 0x51, KEY_DOWN }, /* down */ + { 0x00, 0x28, KEY_ENTER }, +}; + +static u8 af9015_ir_table_msi[] = { + 0x03, 0xfc, 0x17, 0xe8, 0x45, 0x05, 0x00, /* power */ + 0x03, 0xfc, 0x0d, 0xf2, 0x51, 0x00, 0x00, /* down */ + 0x03, 0xfc, 0x03, 0xfc, 0x52, 0x00, 0x00, /* up */ + 0x03, 0xfc, 0x1a, 0xe5, 0x1e, 0x00, 0x00, /* 1 */ + 0x03, 0xfc, 0x02, 0xfd, 0x1f, 0x00, 0x00, /* 2 */ + 0x03, 0xfc, 0x04, 0xfb, 0x20, 0x00, 0x00, /* 3 */ + 0x03, 0xfc, 0x1c, 0xe3, 0x21, 0x00, 0x00, /* 4 */ + 0x03, 0xfc, 0x08, 0xf7, 0x22, 0x00, 0x00, /* 5 */ + 0x03, 0xfc, 0x1d, 0xe2, 0x23, 0x00, 0x00, /* 6 */ + 0x03, 0xfc, 0x11, 0xee, 0x24, 0x00, 0x00, /* 7 */ + 0x03, 0xfc, 0x0b, 0xf4, 0x25, 0x00, 0x00, /* 8 */ + 0x03, 0xfc, 0x10, 0xef, 0x26, 0x00, 0x00, /* 9 */ + 0x03, 0xfc, 0x09, 0xf6, 0x27, 0x00, 0x00, /* 0 */ + 0x03, 0xfc, 0x14, 0xeb, 0x43, 0x00, 0x00, /* volume up */ + 0x03, 0xfc, 0x1f, 0xe0, 0x42, 0x00, 0x00, /* volume down */ + 0x03, 0xfc, 0x15, 0xea, 0x0f, 0x03, 0x00, /* channel up */ + 0x03, 0xfc, 0x05, 0xfa, 0x0e, 0x03, 0x00, /* channel down */ + 0x03, 0xfc, 0x16, 0xe9, 0x28, 0x00, 0x00, /* enter */ +}; + +/* MYGICTV U718 */ +static struct dvb_usb_rc_key af9015_rc_keys_mygictv[] = { + { 0x00, 0x3d, KEY_SWITCHVIDEOMODE }, + /* TV / AV */ + { 0x05, 0x45, KEY_POWER }, + { 0x00, 0x1e, KEY_1 }, + { 0x00, 0x1f, KEY_2 }, + { 0x00, 0x20, KEY_3 }, + { 0x00, 0x21, KEY_4 }, + { 0x00, 0x22, KEY_5 }, + { 0x00, 0x23, KEY_6 }, + { 0x00, 0x24, KEY_7 }, + { 0x00, 0x25, KEY_8 }, + { 0x00, 0x26, KEY_9 }, + { 0x00, 0x27, KEY_0 }, + { 0x00, 0x41, KEY_MUTE }, + { 0x00, 0x2a, KEY_ESC }, /* Esc */ + { 0x00, 0x2e, KEY_CHANNELUP }, + { 0x00, 0x2d, KEY_CHANNELDOWN }, + { 0x00, 0x42, KEY_VOLUMEDOWN }, + { 0x00, 0x43, KEY_VOLUMEUP }, + { 0x00, 0x52, KEY_UP }, /* up arrow */ + { 0x00, 0x51, KEY_DOWN }, /* down arrow */ + { 0x00, 0x4f, KEY_RIGHT }, /* right arrow */ + { 0x00, 0x50, KEY_LEFT }, /* left arrow */ + { 0x00, 0x28, KEY_ENTER }, /* ok */ + { 0x01, 0x15, KEY_RECORD }, + { 0x03, 0x13, KEY_PLAY }, + { 0x01, 0x13, KEY_PAUSE }, + { 0x01, 0x16, KEY_STOP }, + { 0x03, 0x07, KEY_REWIND }, /* FR << */ + { 0x03, 0x09, KEY_FASTFORWARD }, /* FF >> */ + { 0x00, 0x3b, KEY_TIME }, /* TimeShift */ + { 0x00, 0x3e, KEY_CAMERA }, /* Snapshot */ + { 0x03, 0x16, KEY_CYCLEWINDOWS }, /* yellow, min / max */ + { 0x00, 0x00, KEY_ZOOM }, /* 'select' (?) */ + { 0x03, 0x16, KEY_SHUFFLE }, /* Shuffle */ + { 0x03, 0x45, KEY_POWER }, +}; + +static u8 af9015_ir_table_mygictv[] = { + 0x02, 0xbd, 0x0c, 0xf3, 0x3d, 0x00, 0x00, /* TV / AV */ + 0x02, 0xbd, 0x14, 0xeb, 0x45, 0x05, 0x00, /* power */ + 0x02, 0xbd, 0x00, 0xff, 0x1e, 0x00, 0x00, /* 1 */ + 0x02, 0xbd, 0x01, 0xfe, 0x1f, 0x00, 0x00, /* 2 */ + 0x02, 0xbd, 0x02, 0xfd, 0x20, 0x00, 0x00, /* 3 */ + 0x02, 0xbd, 0x03, 0xfc, 0x21, 0x00, 0x00, /* 4 */ + 0x02, 0xbd, 0x04, 0xfb, 0x22, 0x00, 0x00, /* 5 */ + 0x02, 0xbd, 0x05, 0xfa, 0x23, 0x00, 0x00, /* 6 */ + 0x02, 0xbd, 0x06, 0xf9, 0x24, 0x00, 0x00, /* 7 */ + 0x02, 0xbd, 0x07, 0xf8, 0x25, 0x00, 0x00, /* 8 */ + 0x02, 0xbd, 0x08, 0xf7, 0x26, 0x00, 0x00, /* 9 */ + 0x02, 0xbd, 0x09, 0xf6, 0x27, 0x00, 0x00, /* 0 */ + 0x02, 0xbd, 0x0a, 0xf5, 0x41, 0x00, 0x00, /* mute */ + 0x02, 0xbd, 0x1c, 0xe3, 0x2a, 0x00, 0x00, /* esc */ + 0x02, 0xbd, 0x1f, 0xe0, 0x43, 0x00, 0x00, /* volume up */ + 0x02, 0xbd, 0x12, 0xed, 0x52, 0x00, 0x00, /* up arrow */ + 0x02, 0xbd, 0x11, 0xee, 0x50, 0x00, 0x00, /* left arrow */ + 0x02, 0xbd, 0x15, 0xea, 0x28, 0x00, 0x00, /* ok */ + 0x02, 0xbd, 0x10, 0xef, 0x4f, 0x00, 0x00, /* right arrow */ + 0x02, 0xbd, 0x13, 0xec, 0x51, 0x00, 0x00, /* down arrow */ + 0x02, 0xbd, 0x0e, 0xf1, 0x42, 0x00, 0x00, /* volume down */ + 0x02, 0xbd, 0x19, 0xe6, 0x15, 0x01, 0x00, /* record */ + 0x02, 0xbd, 0x1e, 0xe1, 0x13, 0x03, 0x00, /* play */ + 0x02, 0xbd, 0x16, 0xe9, 0x16, 0x01, 0x00, /* stop */ + 0x02, 0xbd, 0x0b, 0xf4, 0x28, 0x04, 0x00, /* yellow, min / max */ + 0x02, 0xbd, 0x0f, 0xf0, 0x3b, 0x00, 0x00, /* time shift */ + 0x02, 0xbd, 0x18, 0xe7, 0x2e, 0x00, 0x00, /* channel up */ + 0x02, 0xbd, 0x1a, 0xe5, 0x2d, 0x00, 0x00, /* channel down */ + 0x02, 0xbd, 0x17, 0xe8, 0x3e, 0x00, 0x00, /* snapshot */ + 0x02, 0xbd, 0x40, 0xbf, 0x13, 0x01, 0x00, /* pause */ + 0x02, 0xbd, 0x41, 0xbe, 0x09, 0x03, 0x00, /* FF >> */ + 0x02, 0xbd, 0x42, 0xbd, 0x07, 0x03, 0x00, /* FR << */ + 0x02, 0xbd, 0x43, 0xbc, 0x00, 0x00, 0x00, /* 'select' (?) */ + 0x02, 0xbd, 0x44, 0xbb, 0x16, 0x03, 0x00, /* shuffle */ + 0x02, 0xbd, 0x45, 0xba, 0x45, 0x03, 0x00, /* power */ +}; + +/* KWorld PlusTV Dual DVB-T Stick (DVB-T 399U) */ +static u8 af9015_ir_table_kworld[] = { + 0x86, 0x6b, 0x0c, 0xf3, 0x2e, 0x07, 0x00, + 0x86, 0x6b, 0x16, 0xe9, 0x2d, 0x07, 0x00, + 0x86, 0x6b, 0x1d, 0xe2, 0x37, 0x07, 0x00, + 0x86, 0x6b, 0x00, 0xff, 0x1e, 0x07, 0x00, + 0x86, 0x6b, 0x01, 0xfe, 0x1f, 0x07, 0x00, + 0x86, 0x6b, 0x02, 0xfd, 0x20, 0x07, 0x00, + 0x86, 0x6b, 0x03, 0xfc, 0x21, 0x07, 0x00, + 0x86, 0x6b, 0x04, 0xfb, 0x22, 0x07, 0x00, + 0x86, 0x6b, 0x05, 0xfa, 0x23, 0x07, 0x00, + 0x86, 0x6b, 0x06, 0xf9, 0x24, 0x07, 0x00, + 0x86, 0x6b, 0x07, 0xf8, 0x25, 0x07, 0x00, + 0x86, 0x6b, 0x08, 0xf7, 0x26, 0x07, 0x00, + 0x86, 0x6b, 0x09, 0xf6, 0x4d, 0x07, 0x00, + 0x86, 0x6b, 0x0a, 0xf5, 0x4e, 0x07, 0x00, + 0x86, 0x6b, 0x14, 0xeb, 0x4f, 0x07, 0x00, + 0x86, 0x6b, 0x1e, 0xe1, 0x50, 0x07, 0x00, + 0x86, 0x6b, 0x17, 0xe8, 0x52, 0x07, 0x00, + 0x86, 0x6b, 0x1f, 0xe0, 0x51, 0x07, 0x00, + 0x86, 0x6b, 0x0e, 0xf1, 0x0b, 0x07, 0x00, + 0x86, 0x6b, 0x20, 0xdf, 0x0c, 0x07, 0x00, + 0x86, 0x6b, 0x42, 0xbd, 0x0d, 0x07, 0x00, + 0x86, 0x6b, 0x0b, 0xf4, 0x0e, 0x07, 0x00, + 0x86, 0x6b, 0x43, 0xbc, 0x0f, 0x07, 0x00, + 0x86, 0x6b, 0x10, 0xef, 0x10, 0x07, 0x00, + 0x86, 0x6b, 0x21, 0xde, 0x11, 0x07, 0x00, + 0x86, 0x6b, 0x13, 0xec, 0x12, 0x07, 0x00, + 0x86, 0x6b, 0x11, 0xee, 0x13, 0x07, 0x00, + 0x86, 0x6b, 0x12, 0xed, 0x14, 0x07, 0x00, + 0x86, 0x6b, 0x19, 0xe6, 0x15, 0x07, 0x00, + 0x86, 0x6b, 0x1a, 0xe5, 0x16, 0x07, 0x00, + 0x86, 0x6b, 0x1b, 0xe4, 0x17, 0x07, 0x00, + 0x86, 0x6b, 0x4b, 0xb4, 0x18, 0x07, 0x00, + 0x86, 0x6b, 0x40, 0xbf, 0x19, 0x07, 0x00, + 0x86, 0x6b, 0x44, 0xbb, 0x1a, 0x07, 0x00, + 0x86, 0x6b, 0x41, 0xbe, 0x1b, 0x07, 0x00, + 0x86, 0x6b, 0x22, 0xdd, 0x1c, 0x07, 0x00, + 0x86, 0x6b, 0x15, 0xea, 0x1d, 0x07, 0x00, + 0x86, 0x6b, 0x0f, 0xf0, 0x3f, 0x07, 0x00, + 0x86, 0x6b, 0x1c, 0xe3, 0x40, 0x07, 0x00, + 0x86, 0x6b, 0x4a, 0xb5, 0x41, 0x07, 0x00, + 0x86, 0x6b, 0x48, 0xb7, 0x42, 0x07, 0x00, + 0x86, 0x6b, 0x49, 0xb6, 0x43, 0x07, 0x00, + 0x86, 0x6b, 0x18, 0xe7, 0x44, 0x07, 0x00, + 0x86, 0x6b, 0x23, 0xdc, 0x45, 0x07, 0x00, +}; + +#endif diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index 81369b79e75a..2558f2b51c2b 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -34,12 +34,14 @@ #define USB_VID_HAUPPAUGE 0x2040 #define USB_VID_HYPER_PALTEK 0x1025 #define USB_VID_KWORLD 0xeb2a +#define USB_VID_KWORLD_2 0x1b80 #define USB_VID_KYE 0x0458 #define USB_VID_LEADTEK 0x0413 #define USB_VID_LITEON 0x04ca #define USB_VID_MEDION 0x1660 #define USB_VID_MIGLIA 0x18f3 #define USB_VID_MSI 0x0db0 +#define USB_VID_MSI_2 0x1462 #define USB_VID_OPERA1 0x695c #define USB_VID_PINNACLE 0x2304 #define USB_VID_TECHNOTREND 0x0b48 @@ -51,15 +53,18 @@ #define USB_VID_WIDEVIEW 0x14aa #define USB_VID_GIGABYTE 0x1044 #define USB_VID_YUAN 0x1164 - +#define USB_VID_XTENSIONS 0x1ae7 /* Product IDs */ #define USB_PID_ADSTECH_USB2_COLD 0xa333 #define USB_PID_ADSTECH_USB2_WARM 0xa334 #define USB_PID_AFATECH_AF9005 0x9020 +#define USB_PID_AFATECH_AF9015_9015 0x9015 +#define USB_PID_AFATECH_AF9015_9016 0x9016 #define USB_VID_ALINK_DTU 0xf170 #define USB_PID_ANSONIC_DVBT_USB 0x6000 #define USB_PID_ANYSEE 0x861f +#define USB_PID_AZUREWAVE_AD_TU700 0x3237 #define USB_PID_AVERMEDIA_DVBT_USB_COLD 0x0001 #define USB_PID_AVERMEDIA_DVBT_USB_WARM 0x0002 #define USB_PID_AVERMEDIA_DVBT_USB2_COLD 0xa800 @@ -89,9 +94,12 @@ #define USB_PID_UNIWILL_STK7700P 0x6003 #define USB_PID_GRANDTEC_DVBT_USB_COLD 0x0fa0 #define USB_PID_GRANDTEC_DVBT_USB_WARM 0x0fa1 +#define USB_PID_KWORLD_399U 0xe399 +#define USB_PID_KWORLD_PC160_2T 0xc160 #define USB_PID_KWORLD_VSTREAM_COLD 0x17de #define USB_PID_KWORLD_VSTREAM_WARM 0x17df #define USB_PID_TERRATEC_CINERGY_T_USB_XE 0x0055 +#define USB_PID_TERRATEC_CINERGY_T_USB_XE_REV2 0x0069 #define USB_PID_TWINHAN_VP7041_COLD 0x3201 #define USB_PID_TWINHAN_VP7041_WARM 0x3202 #define USB_PID_TWINHAN_VP7020_COLD 0x3203 @@ -100,6 +108,7 @@ #define USB_PID_TWINHAN_VP7045_WARM 0x3206 #define USB_PID_TWINHAN_VP7021_COLD 0x3207 #define USB_PID_TWINHAN_VP7021_WARM 0x3208 +#define USB_PID_TINYTWIN 0x3226 #define USB_PID_DNTV_TINYUSB2_COLD 0x3223 #define USB_PID_DNTV_TINYUSB2_WARM 0x3224 #define USB_PID_ULTIMA_TVBOX_COLD 0x8105 @@ -146,6 +155,8 @@ #define USB_PID_AVERMEDIA_HYBRID_ULTRA_USB_M039R 0x0039 #define USB_PID_AVERMEDIA_HYBRID_ULTRA_USB_M039R_ATSC 0x1039 #define USB_PID_AVERMEDIA_HYBRID_ULTRA_USB_M039R_DVBT 0x2039 +#define USB_PID_AVERMEDIA_VOLAR_X 0xa815 +#define USB_PID_AVERMEDIA_VOLAR_X_2 0x8150 #define USB_PID_TECHNOTREND_CONNECT_S2400 0x3006 #define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY 0x005a #define USB_PID_TERRATEC_CINERGY_HT_USB_XE 0x0058 @@ -155,6 +166,7 @@ #define USB_PID_PINNACLE_PCTV2000E 0x022c #define USB_PID_PINNACLE_PCTV_DVB_T_FLASH 0x0228 #define USB_PID_PINNACLE_PCTV_DUAL_DIVERSITY_DVB_T 0x0229 +#define USB_PID_PINNACLE_PCTV71E 0x022b #define USB_PID_PINNACLE_PCTV72E 0x0236 #define USB_PID_PINNACLE_PCTV73E 0x0237 #define USB_PID_PCTV_200E 0x020e @@ -193,6 +205,7 @@ #define USB_PID_WINFAST_DTV_DONGLE_WARM 0x6026 #define USB_PID_WINFAST_DTV_DONGLE_STK7700P 0x6f00 #define USB_PID_WINFAST_DTV_DONGLE_STK7700P_2 0x6f01 +#define USB_PID_WINFAST_DTV_DONGLE_GOLD 0x6029 #define USB_PID_GENPIX_8PSK_REV_1_COLD 0x0200 #define USB_PID_GENPIX_8PSK_REV_1_WARM 0x0201 #define USB_PID_GENPIX_8PSK_REV_2 0x0202 @@ -200,6 +213,7 @@ #define USB_PID_GENPIX_SKYWALKER_CW3K 0x0204 #define USB_PID_SIGMATEK_DVB_110 0x6610 #define USB_PID_MSI_DIGI_VOX_MINI_II 0x1513 +#define USB_PID_MSI_DIGIVOX_DUO 0x8801 #define USB_PID_OPERA1_COLD 0x2830 #define USB_PID_OPERA1_WARM 0x3829 #define USB_PID_LIFEVIEW_TV_WALKER_TWIN_COLD 0x0514 @@ -209,5 +223,6 @@ #define USB_PID_ASUS_U3100 0x173f #define USB_PID_YUAN_EC372S 0x1edc #define USB_PID_DW2102 0x2102 +#define USB_PID_XTENSIONS_XD_380 0x0381 #endif -- cgit v1.2.3 From 111f9ecf174655f3da2b266602f20f11e6a6a4c7 Mon Sep 17 00:00:00 2001 From: Mikko Ohtamaa Date: Fri, 19 Sep 2008 18:26:05 -0300 Subject: V4L/DVB (8974): af9015: Add USB ID for Telestar Starstick 2 - Add USB ID for Telestar Starstick 2 (10b9:8000) Signed-off-by: Mikko Ohtamaa Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/af9015.c | 8 +++++++- drivers/media/dvb/dvb-usb/dvb-usb-ids.h | 2 ++ 2 files changed, 9 insertions(+), 1 deletion(-) (limited to 'drivers/media/dvb/dvb-usb/dvb-usb-ids.h') diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c index a284648094c2..505432b10b8d 100644 --- a/drivers/media/dvb/dvb-usb/af9015.c +++ b/drivers/media/dvb/dvb-usb/af9015.c @@ -1196,6 +1196,7 @@ static struct usb_device_id af9015_usb_table[] = { /* 10 */{USB_DEVICE(USB_VID_XTENSIONS, USB_PID_XTENSIONS_XD_380)}, {USB_DEVICE(USB_VID_MSI_2, USB_PID_MSI_DIGIVOX_DUO)}, {USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_X_2)}, + {USB_DEVICE(USB_VID_TELESTAR, USB_PID_TELESTAR)}, {0}, }; MODULE_DEVICE_TABLE(usb, af9015_usb_table); @@ -1346,7 +1347,7 @@ static struct dvb_usb_device_properties af9015_properties[] = { .i2c_algo = &af9015_i2c_algo, - .num_device_descs = 3, + .num_device_descs = 4, .devices = { { .name = "Xtensions XD-380", @@ -1363,6 +1364,11 @@ static struct dvb_usb_device_properties af9015_properties[] = { .cold_ids = {&af9015_usb_table[12], NULL}, .warm_ids = {NULL}, }, + { + .name = "Telestar USB DVB-T", + .cold_ids = {&af9015_usb_table[13], NULL}, + .warm_ids = {NULL}, + }, } } }; diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index 2558f2b51c2b..60c241e0236f 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -46,6 +46,7 @@ #define USB_VID_PINNACLE 0x2304 #define USB_VID_TECHNOTREND 0x0b48 #define USB_VID_TERRATEC 0x0ccd +#define USB_VID_TELESTAR 0x10b9 #define USB_VID_VISIONPLUS 0x13d3 #define USB_VID_TWINHAN 0x1822 #define USB_VID_ULTIMA_ELECTRONIC 0x05d8 @@ -224,5 +225,6 @@ #define USB_PID_YUAN_EC372S 0x1edc #define USB_PID_DW2102 0x2102 #define USB_PID_XTENSIONS_XD_380 0x0381 +#define USB_PID_TELESTAR 0x8000 #endif -- cgit v1.2.3 From a3765888a7edc4efe54293d8f7c6676cae61057e Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Fri, 19 Sep 2008 18:34:06 -0300 Subject: V4L/DVB (8975): af9015: cleanup - cleanup Telestar Starstick 2 patch Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/af9015.c | 4 ++-- drivers/media/dvb/dvb-usb/dvb-usb-ids.h | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/media/dvb/dvb-usb/dvb-usb-ids.h') diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c index 505432b10b8d..f962d89db134 100644 --- a/drivers/media/dvb/dvb-usb/af9015.c +++ b/drivers/media/dvb/dvb-usb/af9015.c @@ -1196,7 +1196,7 @@ static struct usb_device_id af9015_usb_table[] = { /* 10 */{USB_DEVICE(USB_VID_XTENSIONS, USB_PID_XTENSIONS_XD_380)}, {USB_DEVICE(USB_VID_MSI_2, USB_PID_MSI_DIGIVOX_DUO)}, {USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_X_2)}, - {USB_DEVICE(USB_VID_TELESTAR, USB_PID_TELESTAR)}, + {USB_DEVICE(USB_VID_TELESTAR, USB_PID_TELESTAR_STARSTICK_2)}, {0}, }; MODULE_DEVICE_TABLE(usb, af9015_usb_table); @@ -1365,7 +1365,7 @@ static struct dvb_usb_device_properties af9015_properties[] = { .warm_ids = {NULL}, }, { - .name = "Telestar USB DVB-T", + .name = "Telestar Starstick 2", .cold_ids = {&af9015_usb_table[13], NULL}, .warm_ids = {NULL}, }, diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index 60c241e0236f..66dc000d4e49 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -225,6 +225,6 @@ #define USB_PID_YUAN_EC372S 0x1edc #define USB_PID_DW2102 0x2102 #define USB_PID_XTENSIONS_XD_380 0x0381 -#define USB_PID_TELESTAR 0x8000 +#define USB_PID_TELESTAR_STARSTICK_2 0x8000 #endif -- cgit v1.2.3 From 05c1cab55c282199b85138dc1900b5d9bd6fb32a Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Mon, 22 Sep 2008 12:32:37 -0300 Subject: V4L/DVB (8976): af9015: Add USB ID for AVerMedia A309 - AVerMedia A309 Mini Card (07ca:a309) Thanks-to: Dirk Vornheder Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/af9015.c | 8 +++++++- drivers/media/dvb/dvb-usb/dvb-usb-ids.h | 1 + 2 files changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers/media/dvb/dvb-usb/dvb-usb-ids.h') diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c index f962d89db134..3f6217bd0638 100644 --- a/drivers/media/dvb/dvb-usb/af9015.c +++ b/drivers/media/dvb/dvb-usb/af9015.c @@ -1197,6 +1197,7 @@ static struct usb_device_id af9015_usb_table[] = { {USB_DEVICE(USB_VID_MSI_2, USB_PID_MSI_DIGIVOX_DUO)}, {USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_X_2)}, {USB_DEVICE(USB_VID_TELESTAR, USB_PID_TELESTAR_STARSTICK_2)}, + {USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A309)}, {0}, }; MODULE_DEVICE_TABLE(usb, af9015_usb_table); @@ -1347,7 +1348,7 @@ static struct dvb_usb_device_properties af9015_properties[] = { .i2c_algo = &af9015_i2c_algo, - .num_device_descs = 4, + .num_device_descs = 5, .devices = { { .name = "Xtensions XD-380", @@ -1369,6 +1370,11 @@ static struct dvb_usb_device_properties af9015_properties[] = { .cold_ids = {&af9015_usb_table[13], NULL}, .warm_ids = {NULL}, }, + { + .name = "AVerMedia A309", + .cold_ids = {&af9015_usb_table[14], NULL}, + .warm_ids = {NULL}, + }, } } }; diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index 66dc000d4e49..7ae262e08f8f 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -158,6 +158,7 @@ #define USB_PID_AVERMEDIA_HYBRID_ULTRA_USB_M039R_DVBT 0x2039 #define USB_PID_AVERMEDIA_VOLAR_X 0xa815 #define USB_PID_AVERMEDIA_VOLAR_X_2 0x8150 +#define USB_PID_AVERMEDIA_A309 0xa309 #define USB_PID_TECHNOTREND_CONNECT_S2400 0x3006 #define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY 0x005a #define USB_PID_TERRATEC_CINERGY_HT_USB_XE 0x0058 -- cgit v1.2.3 From 17a370bcca661a849c9af07feae86f42d0c6dfd1 Mon Sep 17 00:00:00 2001 From: Finn Thain Date: Sat, 6 Sep 2008 13:42:47 -0300 Subject: V4L/DVB (9038): Add support for the Gigabyte R8000-HT USB DVB-T adapter. Thanks to Ilia Penev for the tip-off that this device is much the same as (identical to?) a Terratec Cinergy HT USB XE, and for the firmware hints: http://linuxtv.org/pipermail/linux-dvb/2008-August/028108.html DVB functionality tested OK with xine using the usual dib0700 firmware. This diff is based on the latest latest linuxtv.org v4l-dvb mercurial repo. Signed-off-by: Finn Thain Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/dib0700_devices.c | 7 ++++++- drivers/media/dvb/dvb-usb/dvb-usb-ids.h | 1 + 2 files changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers/media/dvb/dvb-usb/dvb-usb-ids.h') diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index 6c0e5c5f4362..110d9344bc92 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -1119,6 +1119,7 @@ struct usb_device_id dib0700_usb_id_table[] = { { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_STK7700P_2) }, /* 35 */{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK_52009) }, { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_3) }, + { USB_DEVICE(USB_VID_GIGABYTE, USB_PID_GIGABYTE_U8000) }, { 0 } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table); @@ -1408,7 +1409,7 @@ struct dvb_usb_device_properties dib0700_devices[] = { }, }, - .num_device_descs = 3, + .num_device_descs = 4, .devices = { { "Terratec Cinergy HT USB XE", { &dib0700_usb_id_table[27], NULL }, @@ -1422,6 +1423,10 @@ struct dvb_usb_device_properties dib0700_devices[] = { { &dib0700_usb_id_table[32], NULL }, { NULL }, }, + { "Gigabyte U8000-RH", + { &dib0700_usb_id_table[37], NULL }, + { NULL }, + }, }, .rc_interval = DEFAULT_RC_INTERVAL, .rc_key_map = dib0700_rc_keys, diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index 7ae262e08f8f..e60e87315548 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -221,6 +221,7 @@ #define USB_PID_LIFEVIEW_TV_WALKER_TWIN_COLD 0x0514 #define USB_PID_LIFEVIEW_TV_WALKER_TWIN_WARM 0x0513 #define USB_PID_GIGABYTE_U7000 0x7001 +#define USB_PID_GIGABYTE_U8000 0x7002 #define USB_PID_ASUS_U3000 0x171f #define USB_PID_ASUS_U3100 0x173f #define USB_PID_YUAN_EC372S 0x1edc -- cgit v1.2.3 From 8751aaa6c8be191171cd8c7db01a9b4e01892b08 Mon Sep 17 00:00:00 2001 From: Daniel Oliveira Nascimento Date: Sun, 7 Sep 2008 12:39:44 -0300 Subject: V4L/DVB (9041): Add support YUAN High-Tech STK7700D (1164:1f08) This patch extends the dib0700 driver to support the DVB-part of the Asus notebook M51Sn tv-tunner (USB-ID 1164:1f08). Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/dib0700_devices.c | 7 ++++++- drivers/media/dvb/dvb-usb/dvb-usb-ids.h | 1 + 2 files changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers/media/dvb/dvb-usb/dvb-usb-ids.h') diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index 2555e53b31dd..a5e970ecab2c 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -1120,6 +1120,7 @@ struct usb_device_id dib0700_usb_id_table[] = { /* 35 */{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK_52009) }, { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_3) }, { USB_DEVICE(USB_VID_GIGABYTE, USB_PID_GIGABYTE_U8000) }, + { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_STK7700PH) }, { 0 } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table); @@ -1409,7 +1410,7 @@ struct dvb_usb_device_properties dib0700_devices[] = { }, }, - .num_device_descs = 4, + .num_device_descs = 5, .devices = { { "Terratec Cinergy HT USB XE", { &dib0700_usb_id_table[27], NULL }, @@ -1427,6 +1428,10 @@ struct dvb_usb_device_properties dib0700_devices[] = { { &dib0700_usb_id_table[37], NULL }, { NULL }, }, + { "YUAN High-Tech STK7700PH", + { &dib0700_usb_id_table[38], NULL }, + { NULL }, + }, }, .rc_interval = DEFAULT_RC_INTERVAL, .rc_key_map = dib0700_rc_keys, diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index e60e87315548..7bf5a1cdb49c 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -225,6 +225,7 @@ #define USB_PID_ASUS_U3000 0x171f #define USB_PID_ASUS_U3100 0x173f #define USB_PID_YUAN_EC372S 0x1edc +#define USB_PID_YUAN_STK7700PH 0x1f08 #define USB_PID_DW2102 0x2102 #define USB_PID_XTENSIONS_XD_380 0x0381 #define USB_PID_TELESTAR_STARSTICK_2 0x8000 -- cgit v1.2.3 From 5769743ad345881911cee4e73ddf6120b00ed3eb Mon Sep 17 00:00:00 2001 From: Albert Comerma Date: Sun, 7 Sep 2008 12:43:33 -0300 Subject: V4L/DVB (9042): Add support for Asus My Cinema U3000 Hybrid This patch introduces support for dvb-t for the following dibcom based cards: Asus My Cinema U3000 Hybrid (USB-ID: 0b05:1736) Signed-off-by: Albert Comerma Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/dib0700_devices.c | 5 +++++ drivers/media/dvb/dvb-usb/dvb-usb-ids.h | 1 + 2 files changed, 6 insertions(+) (limited to 'drivers/media/dvb/dvb-usb/dvb-usb-ids.h') diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index a5e970ecab2c..d08cd4562097 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -1121,6 +1121,7 @@ struct usb_device_id dib0700_usb_id_table[] = { { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_3) }, { USB_DEVICE(USB_VID_GIGABYTE, USB_PID_GIGABYTE_U8000) }, { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_STK7700PH) }, + { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3000H) }, { 0 } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table); @@ -1432,6 +1433,10 @@ struct dvb_usb_device_properties dib0700_devices[] = { { &dib0700_usb_id_table[38], NULL }, { NULL }, }, + { "Asus My Cinema-U3000Hybrid", + { &dib0700_usb_id_table[39], NULL }, + { NULL }, + }, }, .rc_interval = DEFAULT_RC_INTERVAL, .rc_key_map = dib0700_rc_keys, diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index 7bf5a1cdb49c..8926db2fc489 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -223,6 +223,7 @@ #define USB_PID_GIGABYTE_U7000 0x7001 #define USB_PID_GIGABYTE_U8000 0x7002 #define USB_PID_ASUS_U3000 0x171f +#define USB_PID_ASUS_U3000H 0x1736 #define USB_PID_ASUS_U3100 0x173f #define USB_PID_YUAN_EC372S 0x1edc #define USB_PID_YUAN_STK7700PH 0x1f08 -- cgit v1.2.3 From cb22cb5213192d2c0baaeec0ae4961e268916419 Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Mon, 8 Sep 2008 05:42:42 -0300 Subject: V4L/DVB (9044): Add support for Pinnacle PCTV HD Pro 801e (ATSC only) Add digital support for the Pinnacle PCTV HD Pro 801e (usb id 2304:023a) Thanks to Patrick Boettcher for providing new firmware fixing the issue with the i2c that prevented the xc5000 from working. Signed-off-by: Devin Heitmueller Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/dib0700.h | 1 + drivers/media/dvb/dvb-usb/dib0700_core.c | 7 +- drivers/media/dvb/dvb-usb/dib0700_devices.c | 111 ++++++++++++++++++++++++++++ drivers/media/dvb/dvb-usb/dvb-usb-ids.h | 1 + 4 files changed, 119 insertions(+), 1 deletion(-) (limited to 'drivers/media/dvb/dvb-usb/dvb-usb-ids.h') diff --git a/drivers/media/dvb/dvb-usb/dib0700.h b/drivers/media/dvb/dvb-usb/dib0700.h index cc0c51d82f2c..739193943c17 100644 --- a/drivers/media/dvb/dvb-usb/dib0700.h +++ b/drivers/media/dvb/dvb-usb/dib0700.h @@ -42,6 +42,7 @@ struct dib0700_state { u8 rc_counter; u8 is_dib7000pc; u8 fw_use_new_i2c_api; + u8 disable_streaming_master_mode; }; extern int dib0700_set_gpio(struct dvb_usb_device *, enum dib07x0_gpios gpio, u8 gpio_dir, u8 gpio_val); diff --git a/drivers/media/dvb/dvb-usb/dib0700_core.c b/drivers/media/dvb/dvb-usb/dib0700_core.c index 4daac8642006..dd53cee3896d 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_core.c +++ b/drivers/media/dvb/dvb-usb/dib0700_core.c @@ -350,7 +350,12 @@ int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) b[0] = REQUEST_ENABLE_VIDEO; b[1] = (onoff << 4) | 0x00; /* this bit gives a kind of command, rather than enabling something or not */ - b[2] = (0x01 << 4); /* Master mode */ + + if (st->disable_streaming_master_mode == 1) + b[2] = 0x00; + else + b[2] = (0x01 << 4); /* Master mode */ + b[3] = 0x00; deb_info("modifying (%d) streaming state for %d\n", onoff, adap->id); diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index d08cd4562097..7d9efd702129 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -14,6 +14,8 @@ #include "mt2060.h" #include "mt2266.h" #include "tuner-xc2028.h" +#include "xc5000.h" +#include "s5h1411.h" #include "dib0070.h" static int force_lna_activation; @@ -1078,6 +1080,89 @@ static int stk7070pd_frontend_attach1(struct dvb_usb_adapter *adap) return adap->fe == NULL ? -ENODEV : 0; } +/* S5H1411 */ +static struct s5h1411_config pinnacle_801e_config = { + .output_mode = S5H1411_PARALLEL_OUTPUT, + .gpio = S5H1411_GPIO_OFF, + .mpeg_timing = S5H1411_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK, + .qam_if = S5H1411_IF_44000, + .vsb_if = S5H1411_IF_44000, + .inversion = S5H1411_INVERSION_OFF, + .status_mode = S5H1411_DEMODLOCKING +}; + +/* Pinnacle PCTV HD Pro 801e GPIOs map: + GPIO0 - currently unknown + GPIO1 - xc5000 tuner reset + GPIO2 - CX25843 sleep + GPIO3 - currently unknown + GPIO4 - currently unknown + GPIO6 - currently unknown + GPIO7 - currently unknown + GPIO9 - currently unknown + GPIO10 - CX25843 reset + */ +static int s5h1411_frontend_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_state *st = adap->dev->priv; + + /* Make use of the new i2c functions from FW 1.20 */ + st->fw_use_new_i2c_api = 1; + + /* The s5h1411 requires the dib0700 to not be in master mode */ + st->disable_streaming_master_mode = 1; + + /* All msleep values taken from Windows USB trace */ + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 0); + dib0700_set_gpio(adap->dev, GPIO3, GPIO_OUT, 0); + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + msleep(400); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); + msleep(60); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); + msleep(30); + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 0); + msleep(30); + + /* Put the CX25843 to sleep for now since we're in digital mode */ + dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 1); + + /* GPIOs are initialized, do the attach */ + adap->fe = dvb_attach(s5h1411_attach, &pinnacle_801e_config, + &adap->dev->i2c_adap); + return adap->fe == NULL ? -ENODEV : 0; +} + +int dib0700_xc5000_tuner_callback(void *priv, int command, int arg) +{ + struct dvb_usb_adapter *adap = priv; + + /* Reset the tuner */ + dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 0); + msleep(330); /* from Windows USB trace */ + dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 1); + msleep(330); /* from Windows USB trace */ + + return 0; +} + +static struct xc5000_config s5h1411_xc5000_tunerconfig = { + .i2c_address = 0x64, + .if_khz = 5380, + .tuner_callback = dib0700_xc5000_tuner_callback +}; + +static int xc5000_tuner_attach(struct dvb_usb_adapter *adap) +{ + return dvb_attach(xc5000_attach, adap->fe, &adap->dev->i2c_adap, + &s5h1411_xc5000_tunerconfig, adap) + == NULL ? -ENODEV : 0; +} + /* DVB-USB and USB stuff follows */ struct usb_device_id dib0700_usb_id_table[] = { /* 0 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700P) }, @@ -1122,6 +1207,7 @@ struct usb_device_id dib0700_usb_id_table[] = { { USB_DEVICE(USB_VID_GIGABYTE, USB_PID_GIGABYTE_U8000) }, { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_STK7700PH) }, { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3000H) }, +/* 40 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV801E) }, { 0 } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table); @@ -1442,6 +1528,31 @@ struct dvb_usb_device_properties dib0700_devices[] = { .rc_key_map = dib0700_rc_keys, .rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys), .rc_query = dib0700_rc_query + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + .num_adapters = 1, + .adapter = { + { + .frontend_attach = s5h1411_frontend_attach, + .tuner_attach = xc5000_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + + .size_of_priv = sizeof(struct + dib0700_adapter_state), + }, + }, + + .num_device_descs = 1, + .devices = { + { "Pinnacle PCTV HD Pro USB Stick", + { &dib0700_usb_id_table[40], NULL }, + { NULL }, + }, + }, + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_key_map = dib0700_rc_keys, + .rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys), + .rc_query = dib0700_rc_query }, }; diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index 8926db2fc489..38a23be68dbc 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -171,6 +171,7 @@ #define USB_PID_PINNACLE_PCTV71E 0x022b #define USB_PID_PINNACLE_PCTV72E 0x0236 #define USB_PID_PINNACLE_PCTV73E 0x0237 +#define USB_PID_PINNACLE_PCTV801E 0x023a #define USB_PID_PCTV_200E 0x020e #define USB_PID_PCTV_400E 0x020f #define USB_PID_PCTV_450E 0x0222 -- cgit v1.2.3 From d2fc3bfcc3abd14ffd1191b37d2809e780919ef4 Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Thu, 25 Sep 2008 06:22:23 -0300 Subject: V4L/DVB (9046): Add support for Non-Pro version of Pinnacle PCTV HD USB Stick Add USB ID for Pinnacle PCTV HD USB Stick. According to the USB trace and photos, the only difference is the removal of the port for the analog S-video/audio input. Thanks to Mike Pringle for providing the USB trace of the device starting up, and testing the support. Signed-off-by: Devin Heitmueller Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/dib0700_devices.c | 7 ++++++- drivers/media/dvb/dvb-usb/dvb-usb-ids.h | 1 + 2 files changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers/media/dvb/dvb-usb/dvb-usb-ids.h') diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index 7d9efd702129..7e692b3b078e 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -1208,6 +1208,7 @@ struct usb_device_id dib0700_usb_id_table[] = { { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_STK7700PH) }, { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3000H) }, /* 40 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV801E) }, + { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV801E_SE) }, { 0 } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table); @@ -1542,12 +1543,16 @@ struct dvb_usb_device_properties dib0700_devices[] = { }, }, - .num_device_descs = 1, + .num_device_descs = 2, .devices = { { "Pinnacle PCTV HD Pro USB Stick", { &dib0700_usb_id_table[40], NULL }, { NULL }, }, + { "Pinnacle PCTV HD USB Stick", + { &dib0700_usb_id_table[41], NULL }, + { NULL }, + }, }, .rc_interval = DEFAULT_RC_INTERVAL, .rc_key_map = dib0700_rc_keys, diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index 38a23be68dbc..dfaf1d2574db 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -172,6 +172,7 @@ #define USB_PID_PINNACLE_PCTV72E 0x0236 #define USB_PID_PINNACLE_PCTV73E 0x0237 #define USB_PID_PINNACLE_PCTV801E 0x023a +#define USB_PID_PINNACLE_PCTV801E_SE 0x023b #define USB_PID_PCTV_200E 0x020e #define USB_PID_PCTV_400E 0x020f #define USB_PID_PCTV_450E 0x0222 -- cgit v1.2.3 From 641015ab2c452e8e554625e2a8e95218182acb4b Mon Sep 17 00:00:00 2001 From: Herbert Graeber Date: Tue, 7 Oct 2008 10:06:36 -0300 Subject: V4L/DVB (9147): af9015: Add USB ID for MSI DIGIVOX mini III - Add USB ID for MSI DIGIVOX mini III (1462:8807) Signed-off-by: Herbert Graeber Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/af9015.c | 8 +++++++- drivers/media/dvb/dvb-usb/dvb-usb-ids.h | 1 + 2 files changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers/media/dvb/dvb-usb/dvb-usb-ids.h') diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c index 67b13062a148..cb0829c038ce 100644 --- a/drivers/media/dvb/dvb-usb/af9015.c +++ b/drivers/media/dvb/dvb-usb/af9015.c @@ -1196,6 +1196,7 @@ static struct usb_device_id af9015_usb_table[] = { {USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_X_2)}, {USB_DEVICE(USB_VID_TELESTAR, USB_PID_TELESTAR_STARSTICK_2)}, {USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A309)}, +/* 15 */{USB_DEVICE(USB_VID_MSI_2, USB_PID_MSI_DIGI_VOX_MINI_III)}, {0}, }; MODULE_DEVICE_TABLE(usb, af9015_usb_table); @@ -1346,7 +1347,7 @@ static struct dvb_usb_device_properties af9015_properties[] = { .i2c_algo = &af9015_i2c_algo, - .num_device_descs = 5, + .num_device_descs = 6, .devices = { { .name = "Xtensions XD-380", @@ -1373,6 +1374,11 @@ static struct dvb_usb_device_properties af9015_properties[] = { .cold_ids = {&af9015_usb_table[14], NULL}, .warm_ids = {NULL}, }, + { + .name = "MSI Digi VOX mini III", + .cold_ids = {&af9015_usb_table[15], NULL}, + .warm_ids = {NULL}, + }, } } }; diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index dfaf1d2574db..7380b94b3b36 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -232,5 +232,6 @@ #define USB_PID_DW2102 0x2102 #define USB_PID_XTENSIONS_XD_380 0x0381 #define USB_PID_TELESTAR_STARSTICK_2 0x8000 +#define USB_PID_MSI_DIGI_VOX_MINI_III 0x8807 #endif -- cgit v1.2.3