From 85de7fac3990cf0c0736edc83856add2e648c76a Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Wed, 21 Nov 2012 06:19:06 +0100 Subject: i2c: mxs: Fix misuse init_completion The init_completion() call does reinit not only the variable carrying the flag that the completion finished, but also initialized the waitqueue associated with the completion. On the contrary, the INIT_COMPLETION() call only reinits the flag. In case there was anything still stuck in the waitqueue, subsequent call to init_completion() would be able to create possible race condition. This patch uses the proper function and moves init_completion() into .probe() call of the driver, to be issued only once. Note that such scenario is impossible, since two threads can never enter the mxs_i2c_xfer_msg(), since whole this section is protected by mutex in I2C core. This by no means allows this issue to exit though. Signed-off-by: Marek Vasut Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-mxs.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/i2c/busses/i2c-mxs.c') diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index 1b1a936eccc9..977c4d596b69 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -316,7 +316,7 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, if (msg->len == 0) return -EINVAL; - init_completion(&i2c->cmd_complete); + INIT_COMPLETION(i2c->cmd_complete); i2c->cmd_err = 0; ret = mxs_i2c_dma_setup_xfer(adap, msg, flags); @@ -473,6 +473,8 @@ static int mxs_i2c_probe(struct platform_device *pdev) i2c->dev = dev; i2c->speed = &mxs_i2c_95kHz_config; + init_completion(&i2c->cmd_complete); + if (dev->of_node) { err = mxs_i2c_get_ofdata(i2c); if (err) -- cgit v1.2.3