From efd11cc8fa1a6d8aba16bd6aaa774ecc3d02145f Mon Sep 17 00:00:00 2001 From: Mark yao Date: Sat, 27 May 2017 19:43:36 +0800 Subject: drm/rockchip: Correct vop out_mode configure Force vop output mode on encoder driver seem not a good idea, EDP, HDMI, DisplayPort all have 10bit input on rk3399, On non-10bit vop, vop 8bit output bit[0-7] connect to the encoder high 8bit [2-9]. So force RGB10 to RGB888 on vop driver would be better. And another problem, EDP check crtc id on atomic_check, but encoder maybe NULL, so out_mode configure would fail, it cause edp no display. Signed-off-by: Mark Yao Reviewed-by: Jeffy Chen Link: http://patchwork.freedesktop.org/patch/msgid/1495885416-22216-1-git-send-email-mark.yao@rock-chips.com --- drivers/gpu/drm/rockchip/cdn-dp-core.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) (limited to 'drivers/gpu/drm/rockchip/cdn-dp-core.c') diff --git a/drivers/gpu/drm/rockchip/cdn-dp-core.c b/drivers/gpu/drm/rockchip/cdn-dp-core.c index a2169dd3d26b..14fa1f8351e8 100644 --- a/drivers/gpu/drm/rockchip/cdn-dp-core.c +++ b/drivers/gpu/drm/rockchip/cdn-dp-core.c @@ -615,7 +615,6 @@ static void cdn_dp_encoder_enable(struct drm_encoder *encoder) { struct cdn_dp_device *dp = encoder_to_dp(encoder); int ret, val; - struct rockchip_crtc_state *state; ret = drm_of_encoder_active_endpoint_id(dp->dev->of_node, encoder); if (ret < 0) { @@ -625,14 +624,10 @@ static void cdn_dp_encoder_enable(struct drm_encoder *encoder) DRM_DEV_DEBUG_KMS(dp->dev, "vop %s output to cdn-dp\n", (ret) ? "LIT" : "BIG"); - state = to_rockchip_crtc_state(encoder->crtc->state); - if (ret) { + if (ret) val = DP_SEL_VOP_LIT | (DP_SEL_VOP_LIT << 16); - state->output_mode = ROCKCHIP_OUT_MODE_P888; - } else { + else val = DP_SEL_VOP_LIT << 16; - state->output_mode = ROCKCHIP_OUT_MODE_AAAA; - } ret = cdn_dp_grf_write(dp, GRF_SOC_CON9, val); if (ret) -- cgit v1.2.3