From cc5f7e2fcbe396f2f461cd67c872af771a334bca Mon Sep 17 00:00:00 2001 From: Alexandru Gagniuc Date: Tue, 20 Oct 2020 17:14:58 -0500 Subject: drm/bridge: sii902x: Enable I/O and core VCC supplies if present On the SII9022, the IOVCC and CVCC12 supplies must reach the correct voltage before the reset sequence is initiated. On most boards, this assumption is true at boot-up, so initialization succeeds. However, when we try to initialize the chip with incorrect supply voltages, it will not respond to I2C requests. sii902x_probe() fails with -ENXIO. To resolve this, look for the "iovcc" and "cvcc12" regulators, and make sure they are enabled before starting the reset sequence. If these supplies are not available in devicetree, then they will default to dummy-regulator. In that case everything will work like before. This was observed on a STM32MP157C-DK2 booting in u-boot falcon mode. On this board, the supplies would be set by the second stage bootloader, which does not run in falcon mode. Signed-off-by: Alexandru Gagniuc Signed-off-by: Sam Ravnborg [Fix checkpatch warnings] Link: https://patchwork.freedesktop.org/patch/msgid/20201020221501.260025-2-mr.nuke.me@gmail.com --- drivers/gpu/drm/bridge/sii902x.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'drivers/gpu/drm/bridge') diff --git a/drivers/gpu/drm/bridge/sii902x.c b/drivers/gpu/drm/bridge/sii902x.c index f78c17f49887..89558e581530 100644 --- a/drivers/gpu/drm/bridge/sii902x.c +++ b/drivers/gpu/drm/bridge/sii902x.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include @@ -168,6 +169,7 @@ struct sii902x { struct drm_connector connector; struct gpio_desc *reset_gpio; struct i2c_mux_core *i2cmux; + struct regulator_bulk_data supplies[2]; /* * Mutex protects audio and video functions from interfering * each other, by keeping their i2c command sequences atomic. @@ -1049,7 +1051,26 @@ static int sii902x_probe(struct i2c_client *client, mutex_init(&sii902x->mutex); + sii902x->supplies[0].supply = "iovcc"; + sii902x->supplies[1].supply = "cvcc12"; + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(sii902x->supplies), + sii902x->supplies); + if (ret < 0) + return ret; + + ret = regulator_bulk_enable(ARRAY_SIZE(sii902x->supplies), + sii902x->supplies); + if (ret < 0) { + dev_err_probe(dev, ret, "Failed to enable supplies"); + return ret; + } + ret = sii902x_init(sii902x); + if (ret < 0) { + regulator_bulk_disable(ARRAY_SIZE(sii902x->supplies), + sii902x->supplies); + } + return ret; } @@ -1060,6 +1081,8 @@ static int sii902x_remove(struct i2c_client *client) i2c_mux_del_adapters(sii902x->i2cmux); drm_bridge_remove(&sii902x->bridge); + regulator_bulk_disable(ARRAY_SIZE(sii902x->supplies), + sii902x->supplies); return 0; } -- cgit v1.2.3