From 4da646b7b52552f3b43eae27ffa5aa2c200f6db6 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Wed, 8 Apr 2009 02:00:13 -0400 Subject: [libata] ahci: use less error-prone array initializers Also, remove unneeded prototype. Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 6b91c26a4635..cd832cb69492 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -313,7 +313,6 @@ static void ahci_error_handler(struct ata_port *ap); static void ahci_post_internal_cmd(struct ata_queued_cmd *qc); static int ahci_port_resume(struct ata_port *ap); static void ahci_dev_config(struct ata_device *dev); -static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl); static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag, u32 opts); #ifdef CONFIG_PM @@ -404,14 +403,14 @@ static struct ata_port_operations ahci_sb600_ops = { #define AHCI_HFLAGS(flags) .private_data = (void *)(flags) static const struct ata_port_info ahci_port_info[] = { - /* board_ahci */ + [board_ahci] = { .flags = AHCI_FLAG_COMMON, .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, }, - /* board_ahci_vt8251 */ + [board_ahci_vt8251] = { AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_PMP), .flags = AHCI_FLAG_COMMON, @@ -419,7 +418,7 @@ static const struct ata_port_info ahci_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &ahci_vt8251_ops, }, - /* board_ahci_ign_iferr */ + [board_ahci_ign_iferr] = { AHCI_HFLAGS (AHCI_HFLAG_IGN_IRQ_IF_ERR), .flags = AHCI_FLAG_COMMON, @@ -427,7 +426,7 @@ static const struct ata_port_info ahci_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, }, - /* board_ahci_sb600 */ + [board_ahci_sb600] = { AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL | AHCI_HFLAG_32BIT_ONLY | AHCI_HFLAG_NO_MSI | @@ -437,7 +436,7 @@ static const struct ata_port_info ahci_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &ahci_sb600_ops, }, - /* board_ahci_mv */ + [board_ahci_mv] = { AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_MSI | AHCI_HFLAG_MV_PATA | AHCI_HFLAG_NO_PMP), @@ -447,7 +446,7 @@ static const struct ata_port_info ahci_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, }, - /* board_ahci_sb700, for SB700 and SB800 */ + [board_ahci_sb700] = /* for SB700 and SB800 */ { AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL), .flags = AHCI_FLAG_COMMON, @@ -455,7 +454,7 @@ static const struct ata_port_info ahci_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &ahci_sb600_ops, }, - /* board_ahci_mcp65 */ + [board_ahci_mcp65] = { AHCI_HFLAGS (AHCI_HFLAG_YES_NCQ), .flags = AHCI_FLAG_COMMON, @@ -463,7 +462,7 @@ static const struct ata_port_info ahci_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, }, - /* board_ahci_nopmp */ + [board_ahci_nopmp] = { AHCI_HFLAGS (AHCI_HFLAG_NO_PMP), .flags = AHCI_FLAG_COMMON, -- cgit v1.2.3 From 2102d7497393e982bf38ffe8f5fd3d487104880d Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sun, 15 Feb 2009 23:30:38 +0400 Subject: libata-sff: avoid byte swapping in ata_sff_data_xfer() Handling of the trailing byte in ata_sff_data_xfer() is suboptimal bacause: - it always initializes the padding buffer to 0 which is not really needed in both the read and write cases; - it has to use memcpy() to transfer a single byte from/to the padding buffer; - it uses io{read|write}16() accessors which swap bytes on the big endian CPUs and so have to additionally convert the data from/to the little endian format instead of using io{read|write}16_rep() accessors which are not supposed to change the byte ordering. Signed-off-by: Sergei Shtylyov Signed-off-by: Jeff Garzik --- drivers/ata/libata-sff.c | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index bb18415d3d63..bbbb1fab1755 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -727,17 +727,23 @@ unsigned int ata_sff_data_xfer(struct ata_device *dev, unsigned char *buf, else iowrite16_rep(data_addr, buf, words); - /* Transfer trailing 1 byte, if any. */ + /* Transfer trailing byte, if any. */ if (unlikely(buflen & 0x01)) { - __le16 align_buf[1] = { 0 }; - unsigned char *trailing_buf = buf + buflen - 1; + unsigned char pad[2]; + /* Point buf to the tail of buffer */ + buf += buflen - 1; + + /* + * Use io*16_rep() accessors here as well to avoid pointlessly + * swapping bytes to and fro on the big endian machines... + */ if (rw == READ) { - align_buf[0] = cpu_to_le16(ioread16(data_addr)); - memcpy(trailing_buf, align_buf, 1); + ioread16_rep(data_addr, pad, 1); + *buf = pad[0]; } else { - memcpy(align_buf, trailing_buf, 1); - iowrite16(le16_to_cpu(align_buf[0]), data_addr); + pad[0] = *buf; + iowrite16_rep(data_addr, pad, 1); } words++; } -- cgit v1.2.3 From f35b5e7c066a41f60683d2689e52a1336479913b Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Wed, 15 Apr 2009 00:00:54 +0400 Subject: sata_sx4: speed up ECC initialization ECC initialization takes too long. It writes zeroes by portions of 4 byte, it takes more than 6 minutes on my machine to initialize 512Mb ECC DIMM module. Change portion to 128Kb - it significantly reduces initialization time. Signed-off-by: Alexander Beregalov Signed-off-by: Jeff Garzik --- drivers/ata/sata_sx4.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c index eb05a3c82a9e..bbcf970068ad 100644 --- a/drivers/ata/sata_sx4.c +++ b/drivers/ata/sata_sx4.c @@ -193,6 +193,7 @@ enum { PDC_TIMER_MASK_INT, }; +#define ECC_ERASE_BUF_SZ (128 * 1024) struct pdc_port_priv { u8 dimm_buf[(ATA_PRD_SZ * ATA_MAX_PRD) + 512]; @@ -1280,7 +1281,6 @@ static unsigned int pdc20621_dimm_init(struct ata_host *host) { int speed, size, length; u32 addr, spd0, pci_status; - u32 tmp = 0; u32 time_period = 0; u32 tcount = 0; u32 ticks = 0; @@ -1395,14 +1395,17 @@ static unsigned int pdc20621_dimm_init(struct ata_host *host) pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS, PDC_DIMM_SPD_TYPE, &spd0); if (spd0 == 0x02) { + void *buf; VPRINTK("Start ECC initialization\n"); addr = 0; length = size * 1024 * 1024; + buf = kzalloc(ECC_ERASE_BUF_SZ, GFP_KERNEL); while (addr < length) { - pdc20621_put_to_dimm(host, (void *) &tmp, addr, - sizeof(u32)); - addr += sizeof(u32); + pdc20621_put_to_dimm(host, buf, addr, + ECC_ERASE_BUF_SZ); + addr += ECC_ERASE_BUF_SZ; } + kfree(buf); VPRINTK("Finish ECC initialization\n"); } return 0; -- cgit v1.2.3 From 31f80112cc7e7ea4c220d6f62b0a7052754befb3 Mon Sep 17 00:00:00 2001 From: Robert Hancock Date: Mon, 13 Apr 2009 22:57:28 -0600 Subject: sata_sil: enable 32-bit PIO 32-bit PIO seems to work fine on sata_sil hardware (tested on SiI3114) and is listed as OK in the Silicon Image datasheets. Enable it. Signed-off-by: Robert Hancock Signed-off-by: Jeff Garzik --- drivers/ata/sata_sil.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/ata') diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index e67ce8e5caa5..030ec079b184 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -183,7 +183,7 @@ static struct scsi_host_template sil_sht = { }; static struct ata_port_operations sil_ops = { - .inherits = &ata_bmdma_port_ops, + .inherits = &ata_bmdma32_port_ops, .dev_config = sil_dev_config, .set_mode = sil_set_mode, .bmdma_setup = sil_bmdma_setup, -- cgit v1.2.3 From 437681800bdaa9feb58cf943dfbbd239c21d3705 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Wed, 20 May 2009 09:44:39 +0200 Subject: [libata] get rid of ATA_MAX_QUEUE loop in ata_qc_complete_multiple() v2 We very rarely (if ever) complete more than one command in the sactive mask at the time, even for extremely high IO rates. So looping over the entire range of possible tags is pointless, instead use __ffs() to just find the completed tags directly. Updated to clear the tag from the done_mask instead of shifting done_mask down as suggested by From: Tejun Heo Verified with a user space tester to produce the same results. Signed-off-by: Jens Axboe Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index c9242301cfa1..ca4d208ddf3b 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -5031,7 +5031,6 @@ int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active) { int nr_done = 0; u32 done_mask; - int i; done_mask = ap->qc_active ^ qc_active; @@ -5041,16 +5040,16 @@ int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active) return -EINVAL; } - for (i = 0; i < ATA_MAX_QUEUE; i++) { + while (done_mask) { struct ata_queued_cmd *qc; + unsigned int tag = __ffs(done_mask); - if (!(done_mask & (1 << i))) - continue; - - if ((qc = ata_qc_from_tag(ap, i))) { + qc = ata_qc_from_tag(ap, tag); + if (qc) { ata_qc_complete(qc); nr_done++; } + done_mask &= ~(1 << tag); } return nr_done; -- cgit v1.2.3 From d50ce07d6fd8a422757a231f9d7293cbddeaec31 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 12 May 2009 10:57:41 +0900 Subject: ahci: misc cleanups for EM stuff Make the following EM related cleanups. * Use msleep(1) instead of udelay(100) and reduce retry count to 5. * s/MAX_SLOTS/EM_MAX_SLOTS/, s/MAX_RETRY/EM_MAX_RETRY/ * Make EM constants enums as suggested by Jeff. Signed-off-by: Tejun Heo Acked-by: David Milburn Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index cd832cb69492..2141a31f176b 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -77,8 +77,6 @@ static ssize_t ahci_led_store(struct ata_port *ap, const char *buf, size_t size); static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state, ssize_t size); -#define MAX_SLOTS 8 -#define MAX_RETRY 15 enum { AHCI_PCI_BAR = 5, @@ -231,6 +229,10 @@ enum { ICH_MAP = 0x90, /* ICH MAP register */ + /* em constants */ + EM_MAX_SLOTS = 8, + EM_MAX_RETRY = 5, + /* em_ctl bits */ EM_CTL_RST = (1 << 9), /* Reset */ EM_CTL_TM = (1 << 8), /* Transmit Message */ @@ -282,8 +284,8 @@ struct ahci_port_priv { unsigned int ncq_saw_dmas:1; unsigned int ncq_saw_sdb:1; u32 intr_mask; /* interrupts to enable */ - struct ahci_em_priv em_priv[MAX_SLOTS];/* enclosure management info - * per PM slot */ + /* enclosure management info per PM slot */ + struct ahci_em_priv em_priv[EM_MAX_SLOTS]; }; static int ahci_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val); @@ -1140,12 +1142,12 @@ static void ahci_start_port(struct ata_port *ap) emp = &pp->em_priv[link->pmp]; /* EM Transmit bit maybe busy during init */ - for (i = 0; i < MAX_RETRY; i++) { + for (i = 0; i < EM_MAX_RETRY; i++) { rc = ahci_transmit_led_message(ap, emp->led_state, 4); if (rc == -EBUSY) - udelay(100); + msleep(1); else break; } @@ -1339,7 +1341,7 @@ static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state, /* get the slot number from the message */ pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8; - if (pmp < MAX_SLOTS) + if (pmp < EM_MAX_SLOTS) emp = &pp->em_priv[pmp]; else return -EINVAL; @@ -1407,7 +1409,7 @@ static ssize_t ahci_led_store(struct ata_port *ap, const char *buf, /* get the slot number from the message */ pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8; - if (pmp < MAX_SLOTS) + if (pmp < EM_MAX_SLOTS) emp = &pp->em_priv[pmp]; else return -EINVAL; -- cgit v1.2.3 From 347979a034539ab20f3bc0c30ac0ccd3c4fd4c2e Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 6 May 2009 17:10:08 +0100 Subject: ata_piix: Turn on hotplugging support for older chips We can't do this for the later ones as they have all sorts of magic boot time stuff that needs reviewing and the like. However we can do it for the older ones and it turns out we need to as some IBM docking stations have a second PIIX series device in them and without this change you can't use it very well Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 1aeb7082b0c4..716e369f39ba 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -1509,8 +1509,8 @@ static int __devinit piix_init_one(struct pci_dev *pdev, dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); - /* no hotplugging support (FIXME) */ - if (!in_module_init) + /* no hotplugging support for later devices (FIXME) */ + if (!in_module_init && ent->driver_data >= ich5_sata) return -ENODEV; if (piix_broken_system_poweroff(pdev)) { -- cgit v1.2.3 From 7654db1a9256d746ae4d229ba675f616a5d5e1a1 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 6 May 2009 17:10:17 +0100 Subject: ata_piix: Remove stale comment Combined mode pci quirk hacks went away - so the table to keep in sync no longer exists. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 716e369f39ba..6e165bf91d65 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -223,10 +223,8 @@ static const struct pci_device_id piix_pci_tbl[] = { /* ICH8 Mobile PATA Controller */ { 0x8086, 0x2850, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, - /* NOTE: The following PCI ids must be kept in sync with the - * list in drivers/pci/quirks.c. - */ - + /* SATA ports */ + /* 82801EB (ICH5) */ { 0x8086, 0x24d1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata }, /* 82801EB (ICH5) */ -- cgit v1.2.3 From 58a09b38cfcd700b796ea07ae3d2e0efbb28b561 Mon Sep 17 00:00:00 2001 From: Shane Huang Date: Wed, 27 May 2009 15:04:43 +0800 Subject: [libata] ahci: Restore SB600 SATA controller 64 bit DMA Community reported one SB600 SATA issue(BZ #9412), which led to 64 bit DMA disablement for all SB600 revisions by driver maintainers with commits c7a42156d99bcea7f8173ba7a6034bbaa2ecb77c and 4cde32fc4b32e96a99063af3183acdfd54c563f0. But the root cause is ASUS M2A-VM system BIOS bug in old revisions like 0901, while forcing into 32bit DMA happens to work as workaround. Now it's time to withdraw 4cde32fc4b32e96a99063af3183acdfd54c563f0 so as to restore the SB600 SATA 64bit DMA capability. This patch is also adding the workaround for M2A-VM old BIOS revisions, but users are suggested to upgrade their system BIOS to the latest one if they meet this issue. Signed-off-by: Shane Huang Cc: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 52 +++++++++++++++++++++++++++++++++++++++++++-- drivers/firmware/dmi_scan.c | 1 + 2 files changed, 51 insertions(+), 2 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 2141a31f176b..15a23031833f 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -431,8 +431,7 @@ static const struct ata_port_info ahci_port_info[] = { [board_ahci_sb600] = { AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL | - AHCI_HFLAG_32BIT_ONLY | AHCI_HFLAG_NO_MSI | - AHCI_HFLAG_SECT255), + AHCI_HFLAG_NO_MSI | AHCI_HFLAG_SECT255), .flags = AHCI_FLAG_COMMON, .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, @@ -2585,6 +2584,51 @@ static void ahci_p5wdh_workaround(struct ata_host *host) } } +/* + * SB600 ahci controller on ASUS M2A-VM can't do 64bit DMA with older + * BIOS. The oldest version known to be broken is 0901 and working is + * 1501 which was released on 2007-10-26. Force 32bit DMA on anything + * older than 1501. Please read bko#9412 for more info. + */ +static bool ahci_asus_m2a_vm_32bit_only(struct pci_dev *pdev) +{ + static const struct dmi_system_id sysids[] = { + { + .ident = "ASUS M2A-VM", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, + "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "M2A-VM"), + }, + }, + { } + }; + const char *cutoff_mmdd = "10/26"; + const char *date; + int year; + + if (pdev->bus->number != 0 || pdev->devfn != PCI_DEVFN(0x12, 0) || + !dmi_check_system(sysids)) + return false; + + /* + * Argh.... both version and date are free form strings. + * Let's hope they're using the same date format across + * different versions. + */ + date = dmi_get_system_info(DMI_BIOS_DATE); + year = dmi_get_year(DMI_BIOS_DATE); + if (date && strlen(date) >= 10 && date[2] == '/' && date[5] == '/' && + (year > 2007 || + (year == 2007 && strncmp(date, cutoff_mmdd, 5) >= 0))) + return false; + + dev_printk(KERN_WARNING, &pdev->dev, "ASUS M2A-VM: BIOS too old, " + "forcing 32bit DMA, update BIOS\n"); + + return true; +} + static bool ahci_broken_system_poweroff(struct pci_dev *pdev) { static const struct dmi_system_id broken_systems[] = { @@ -2745,6 +2789,10 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (board_id == board_ahci_sb700 && pdev->revision >= 0x40) hpriv->flags &= ~AHCI_HFLAG_IGN_SERR_INTERNAL; + /* apply ASUS M2A_VM quirk */ + if (ahci_asus_m2a_vm_32bit_only(pdev)) + hpriv->flags |= AHCI_HFLAG_32BIT_ONLY; + if (!(hpriv->flags & AHCI_HFLAG_NO_MSI)) pci_enable_msi(pdev); diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c index 5f1b5400d96a..24c84ae81527 100644 --- a/drivers/firmware/dmi_scan.c +++ b/drivers/firmware/dmi_scan.c @@ -596,6 +596,7 @@ int dmi_get_year(int field) return year; } +EXPORT_SYMBOL(dmi_get_year); /** * dmi_walk - Walk the DMI table and get called back for every record -- cgit v1.2.3 From 7f4774b38ee6270bbc6c3015cb3fa6c415ffb340 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 10 Jun 2009 16:29:07 +0900 Subject: sata_nv: use hardreset only for post-boot probing When I thought it was finally defeated, it came back with vengeance. The failure cases are ever more convoluted. Now there is a single combination which fails boot probing - MCP5x + Intel SSD and there are two hotplug failure reports on different flavors where softreset fails to bring up the device. Through the many bug reports after the switch to hardreset, the following patterns emerged. - Softreset during boot always works. - Hardreset during boot sometimes fails to bring up the link on certain comibnations and device signature acquisition is unreliable. - Hardreset is often necessary after hotplug. It looks like the old behavior of preferring softreset was somehow pretty close to the working reset protocol although it could have lost a device during phy error handling by issuing hardreset. This patch implements nv_hardreset() which kicks in only for post-boot (!LOADING) device probing resets. This should be able to work around all known problem cases. This isn't perfect but given the various hardreset quirks on these controllers, I think this is as good as it can get. Tested on mcp5x (swncq), nf3 and ck804 for all both boot, warm and hot probing cases. Kudos to all the bug reporters and their painful hours with these damn controllers. ;-) Signed-off-by: Tejun Heo Cc: Robert Hancock Reported-by: David Lang Reported-by: Samo Vodopivec Signed-off-by: Jeff Garzik --- drivers/ata/sata_nv.c | 131 +++++++++++++++++++++++++++++++------------------- 1 file changed, 81 insertions(+), 50 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index 6cda12ba8122..b2d11f300c39 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -305,8 +305,8 @@ static irqreturn_t nv_ck804_interrupt(int irq, void *dev_instance); static int nv_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val); static int nv_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val); -static int nv_noclassify_hardreset(struct ata_link *link, unsigned int *class, - unsigned long deadline); +static int nv_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); static void nv_nf2_freeze(struct ata_port *ap); static void nv_nf2_thaw(struct ata_port *ap); static void nv_ck804_freeze(struct ata_port *ap); @@ -406,49 +406,82 @@ static struct scsi_host_template nv_swncq_sht = { .slave_configure = nv_swncq_slave_config, }; -static struct ata_port_operations nv_common_ops = { +/* + * NV SATA controllers have various different problems with hardreset + * protocol depending on the specific controller and device. + * + * GENERIC: + * + * bko11195 reports that link doesn't come online after hardreset on + * generic nv's and there have been several other similar reports on + * linux-ide. + * + * bko12351#c23 reports that warmplug on MCP61 doesn't work with + * softreset. + * + * NF2/3: + * + * bko3352 reports nf2/3 controllers can't determine device signature + * reliably after hardreset. The following thread reports detection + * failure on cold boot with the standard debouncing timing. + * + * http://thread.gmane.org/gmane.linux.ide/34098 + * + * bko12176 reports that hardreset fails to bring up the link during + * boot on nf2. + * + * CK804: + * + * For initial probing after boot and hot plugging, hardreset mostly + * works fine on CK804 but curiously, reprobing on the initial port + * by rescanning or rmmod/insmod fails to acquire the initial D2H Reg + * FIS in somewhat undeterministic way. + * + * SWNCQ: + * + * bko12351 reports that when SWNCQ is enabled, for hotplug to work, + * hardreset should be used and hardreset can't report proper + * signature, which suggests that mcp5x is closer to nf2 as long as + * reset quirkiness is concerned. + * + * bko12703 reports that boot probing fails for intel SSD with + * hardreset. Link fails to come online. Softreset works fine. + * + * The failures are varied but the following patterns seem true for + * all flavors. + * + * - Softreset during boot always works. + * + * - Hardreset during boot sometimes fails to bring up the link on + * certain comibnations and device signature acquisition is + * unreliable. + * + * - Hardreset is often necessary after hotplug. + * + * So, preferring softreset for boot probing and error handling (as + * hardreset might bring down the link) but using hardreset for + * post-boot probing should work around the above issues in most + * cases. Define nv_hardreset() which only kicks in for post-boot + * probing and use it for all variants. + */ +static struct ata_port_operations nv_generic_ops = { .inherits = &ata_bmdma_port_ops, .lost_interrupt = ATA_OP_NULL, .scr_read = nv_scr_read, .scr_write = nv_scr_write, + .hardreset = nv_hardreset, }; -/* OSDL bz11195 reports that link doesn't come online after hardreset - * on generic nv's and there have been several other similar reports - * on linux-ide. Disable hardreset for generic nv's. - */ -static struct ata_port_operations nv_generic_ops = { - .inherits = &nv_common_ops, - .hardreset = ATA_OP_NULL, -}; - -/* nf2 is ripe with hardreset related problems. - * - * kernel bz#3352 reports nf2/3 controllers can't determine device - * signature reliably. The following thread reports detection failure - * on cold boot with the standard debouncing timing. - * - * http://thread.gmane.org/gmane.linux.ide/34098 - * - * And bz#12176 reports that hardreset simply doesn't work on nf2. - * Give up on it and just don't do hardreset. - */ static struct ata_port_operations nv_nf2_ops = { .inherits = &nv_generic_ops, .freeze = nv_nf2_freeze, .thaw = nv_nf2_thaw, }; -/* For initial probing after boot and hot plugging, hardreset mostly - * works fine on CK804 but curiously, reprobing on the initial port by - * rescanning or rmmod/insmod fails to acquire the initial D2H Reg FIS - * in somewhat undeterministic way. Use noclassify hardreset. - */ static struct ata_port_operations nv_ck804_ops = { - .inherits = &nv_common_ops, + .inherits = &nv_generic_ops, .freeze = nv_ck804_freeze, .thaw = nv_ck804_thaw, - .hardreset = nv_noclassify_hardreset, .host_stop = nv_ck804_host_stop, }; @@ -476,19 +509,8 @@ static struct ata_port_operations nv_adma_ops = { .host_stop = nv_adma_host_stop, }; -/* Kernel bz#12351 reports that when SWNCQ is enabled, for hotplug to - * work, hardreset should be used and hardreset can't report proper - * signature, which suggests that mcp5x is closer to nf2 as long as - * reset quirkiness is concerned. Define separate ops for mcp5x with - * nv_noclassify_hardreset(). - */ -static struct ata_port_operations nv_mcp5x_ops = { - .inherits = &nv_common_ops, - .hardreset = nv_noclassify_hardreset, -}; - static struct ata_port_operations nv_swncq_ops = { - .inherits = &nv_mcp5x_ops, + .inherits = &nv_generic_ops, .qc_defer = ata_std_qc_defer, .qc_prep = nv_swncq_qc_prep, @@ -557,7 +579,7 @@ static const struct ata_port_info nv_port_info[] = { .pio_mask = NV_PIO_MASK, .mwdma_mask = NV_MWDMA_MASK, .udma_mask = NV_UDMA_MASK, - .port_ops = &nv_mcp5x_ops, + .port_ops = &nv_generic_ops, .private_data = NV_PI_PRIV(nv_generic_interrupt, &nv_sht), }, /* SWNCQ */ @@ -1559,15 +1581,24 @@ static int nv_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val) return 0; } -static int nv_noclassify_hardreset(struct ata_link *link, unsigned int *class, - unsigned long deadline) +static int nv_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) { - bool online; - int rc; + struct ata_eh_context *ehc = &link->eh_context; - rc = sata_link_hardreset(link, sata_deb_timing_hotplug, deadline, - &online, NULL); - return online ? -EAGAIN : rc; + /* Do hardreset iff it's post-boot probing, please read the + * comment above port ops for details. + */ + if (!(link->ap->pflags & ATA_PFLAG_LOADING) && + !ata_dev_enabled(link->device)) + sata_link_hardreset(link, sata_deb_timing_hotplug, deadline, + NULL, NULL); + else if (!(ehc->i.flags & ATA_EHI_QUIET)) + ata_link_printk(link, KERN_INFO, + "nv: skipping hardreset on occupied port\n"); + + /* device signature acquisition is unreliable */ + return -EAGAIN; } static void nv_nf2_freeze(struct ata_port *ap) -- cgit v1.2.3 From 517d3cc15b36392e518abab6bacbb72089658313 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Wed, 13 May 2009 15:02:42 +0100 Subject: [libata] ata_piix: Enable parallel scan This patch turns on parallel scanning for the ata_piix driver. This driver is used on most netbooks (no AHCI for cheap storage it seems). The scan is the dominating time factor in the kernel boot for these devices; with this flag it gets cut in half for the device I used for testing (eeepc). Alan took a look at the driver source and concluded that it ought to be safe to do for this driver. Alan has also checked with the hardware team. Signed-off-by: Arjan van de Ven Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/ata') diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 6e165bf91d65..d0a14cf2bd74 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -1589,6 +1589,7 @@ static int __devinit piix_init_one(struct pci_dev *pdev, host->ports[1]->mwdma_mask = 0; host->ports[1]->udma_mask = 0; } + host->flags |= ATA_HOST_PARALLEL_SCAN; pci_set_master(pdev); return ata_pci_sff_activate_host(host, ata_sff_interrupt, &piix_sht); -- cgit v1.2.3