From fe0b393f2c0a0d23a9bc9ed7dc51a1ee511098bd Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Mon, 11 Jan 2010 03:21:47 -0500 Subject: block: Correct handling of bottom device misaligment The top device misalignment flag would not be set if the added bottom device was already misaligned as opposed to causing a stacking failure. Also massage the reporting so that an error is only returned if adding the bottom device caused the misalignment. I.e. don't return an error if the top is already flagged as misaligned. Signed-off-by: Martin K. Petersen Signed-off-by: Jens Axboe --- block/blk-settings.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) (limited to 'block') diff --git a/block/blk-settings.c b/block/blk-settings.c index d52d4adc440b..127f82551855 100644 --- a/block/blk-settings.c +++ b/block/blk-settings.c @@ -528,7 +528,7 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, sector_t offset) { sector_t alignment; - unsigned int top, bottom; + unsigned int top, bottom, ret = 0; t->max_sectors = min_not_zero(t->max_sectors, b->max_sectors); t->max_hw_sectors = min_not_zero(t->max_hw_sectors, b->max_hw_sectors); @@ -546,6 +546,8 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, t->max_segment_size = min_not_zero(t->max_segment_size, b->max_segment_size); + t->misaligned |= b->misaligned; + alignment = queue_limit_alignment_offset(b, offset); /* Bottom device has different alignment. Check that it is @@ -558,8 +560,10 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, bottom = max(b->physical_block_size, b->io_min) + alignment; /* Verify that top and bottom intervals line up */ - if (max(top, bottom) & (min(top, bottom) - 1)) + if (max(top, bottom) & (min(top, bottom) - 1)) { t->misaligned = 1; + ret = -1; + } } t->logical_block_size = max(t->logical_block_size, @@ -578,18 +582,21 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, if (t->physical_block_size & (t->logical_block_size - 1)) { t->physical_block_size = t->logical_block_size; t->misaligned = 1; + ret = -1; } /* Minimum I/O a multiple of the physical block size? */ if (t->io_min & (t->physical_block_size - 1)) { t->io_min = t->physical_block_size; t->misaligned = 1; + ret = -1; } /* Optimal I/O a multiple of the physical block size? */ if (t->io_opt & (t->physical_block_size - 1)) { t->io_opt = 0; t->misaligned = 1; + ret = -1; } /* Find lowest common alignment_offset */ @@ -597,8 +604,10 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, & (max(t->physical_block_size, t->io_min) - 1); /* Verify that new alignment_offset is on a logical block boundary */ - if (t->alignment_offset & (t->logical_block_size - 1)) + if (t->alignment_offset & (t->logical_block_size - 1)) { t->misaligned = 1; + ret = -1; + } /* Discard alignment and granularity */ if (b->discard_granularity) { @@ -626,7 +635,7 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, (t->discard_granularity - 1); } - return t->misaligned ? -1 : 0; + return ret; } EXPORT_SYMBOL(blk_stack_limits); -- cgit v1.2.3 From dd3d145d49c5816b79acc6761ebbd842bc50b0ee Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Mon, 11 Jan 2010 03:21:48 -0500 Subject: block: Fix discard alignment calculation and printing Discard alignment reporting for partitions was incorrect. Update to match the algorithm used elsewhere. The alignment can be negative (misaligned). Fix format string accordingly. Signed-off-by: Martin K. Petersen Signed-off-by: Jens Axboe --- block/genhd.c | 2 +- include/linux/blkdev.h | 7 +++++-- 2 files changed, 6 insertions(+), 3 deletions(-) (limited to 'block') diff --git a/block/genhd.c b/block/genhd.c index b11a4ad7d571..d13ba76a169c 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -867,7 +867,7 @@ static ssize_t disk_discard_alignment_show(struct device *dev, { struct gendisk *disk = dev_to_disk(dev); - return sprintf(buf, "%u\n", queue_discard_alignment(disk->queue)); + return sprintf(buf, "%d\n", queue_discard_alignment(disk->queue)); } static DEVICE_ATTR(range, S_IRUGO, disk_range_show, NULL); diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 9b98173a8184..a41bcc8e140f 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -1148,8 +1148,11 @@ static inline int queue_discard_alignment(struct request_queue *q) static inline int queue_sector_discard_alignment(struct request_queue *q, sector_t sector) { - return ((sector << 9) - q->limits.discard_alignment) - & (q->limits.discard_granularity - 1); + struct queue_limits *lim = &q->limits; + unsigned int alignment = (sector << 9) & (lim->discard_granularity - 1); + + return (lim->discard_granularity + lim->discard_alignment - alignment) + & (lim->discard_granularity - 1); } static inline unsigned int queue_discard_zeroes_data(struct request_queue *q) -- cgit v1.2.3 From 17be8c245054b9c7786545af3ba3ca4e54cd4ad9 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Mon, 11 Jan 2010 03:21:49 -0500 Subject: block: bdev_stack_limits wrapper DM does not want to know about partition offsets. Add a partition-aware wrapper that DM can use when stacking block devices. Signed-off-by: Martin K. Petersen Acked-by: Mike Snitzer Reviewed-by: Alasdair G Kergon Signed-off-by: Jens Axboe --- block/blk-settings.c | 22 ++++++++++++++++++++++ include/linux/blkdev.h | 2 ++ 2 files changed, 24 insertions(+) (limited to 'block') diff --git a/block/blk-settings.c b/block/blk-settings.c index 127f82551855..5eeb9e0d256e 100644 --- a/block/blk-settings.c +++ b/block/blk-settings.c @@ -639,6 +639,28 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, } EXPORT_SYMBOL(blk_stack_limits); +/** + * bdev_stack_limits - adjust queue limits for stacked drivers + * @t: the stacking driver limits (top device) + * @bdev: the component block_device (bottom) + * @start: first data sector within component device + * + * Description: + * Merges queue limits for a top device and a block_device. Returns + * 0 if alignment didn't change. Returns -1 if adding the bottom + * device caused misalignment. + */ +int bdev_stack_limits(struct queue_limits *t, struct block_device *bdev, + sector_t start) +{ + struct request_queue *bq = bdev_get_queue(bdev); + + start += get_start_sect(bdev); + + return blk_stack_limits(t, &bq->limits, start << 9); +} +EXPORT_SYMBOL(bdev_stack_limits); + /** * disk_stack_limits - adjust queue limits for stacked drivers * @disk: MD/DM gendisk (top) diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index a41bcc8e140f..5c8018977efa 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -938,6 +938,8 @@ extern void blk_queue_io_opt(struct request_queue *q, unsigned int opt); extern void blk_set_default_limits(struct queue_limits *lim); extern int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, sector_t offset); +extern int bdev_stack_limits(struct queue_limits *t, struct block_device *bdev, + sector_t offset); extern void disk_stack_limits(struct gendisk *disk, struct block_device *bdev, sector_t offset); extern void blk_queue_stack_limits(struct request_queue *t, struct request_queue *b); -- cgit v1.2.3 From ce289321b7dc1eb108e3df0dec872b7429ef49f7 Mon Sep 17 00:00:00 2001 From: Kirill Afonshin Date: Fri, 8 Jan 2010 22:09:59 +0300 Subject: block: removed unused as_io_context It isn't used anymore, since AS was deleted. Signed-off-by: Jens Axboe --- block/blk-ioc.c | 5 ----- include/linux/iocontext.h | 27 --------------------------- 2 files changed, 32 deletions(-) (limited to 'block') diff --git a/block/blk-ioc.c b/block/blk-ioc.c index cbdabb0dd6d7..98e6bf61b0ac 100644 --- a/block/blk-ioc.c +++ b/block/blk-ioc.c @@ -39,8 +39,6 @@ int put_io_context(struct io_context *ioc) if (atomic_long_dec_and_test(&ioc->refcount)) { rcu_read_lock(); - if (ioc->aic && ioc->aic->dtor) - ioc->aic->dtor(ioc->aic); cfq_dtor(ioc); rcu_read_unlock(); @@ -76,8 +74,6 @@ void exit_io_context(struct task_struct *task) task_unlock(task); if (atomic_dec_and_test(&ioc->nr_tasks)) { - if (ioc->aic && ioc->aic->exit) - ioc->aic->exit(ioc->aic); cfq_exit(ioc); } @@ -97,7 +93,6 @@ struct io_context *alloc_io_context(gfp_t gfp_flags, int node) ret->ioprio = 0; ret->last_waited = jiffies; /* doesn't matter... */ ret->nr_batch_requests = 0; /* because this is 0 */ - ret->aic = NULL; INIT_RADIX_TREE(&ret->radix_root, GFP_ATOMIC | __GFP_HIGH); INIT_HLIST_HEAD(&ret->cic_list); ret->ioc_data = NULL; diff --git a/include/linux/iocontext.h b/include/linux/iocontext.h index a63235996309..78ef023227d4 100644 --- a/include/linux/iocontext.h +++ b/include/linux/iocontext.h @@ -4,32 +4,6 @@ #include #include -/* - * This is the per-process anticipatory I/O scheduler state. - */ -struct as_io_context { - spinlock_t lock; - - void (*dtor)(struct as_io_context *aic); /* destructor */ - void (*exit)(struct as_io_context *aic); /* called on task exit */ - - unsigned long state; - atomic_t nr_queued; /* queued reads & sync writes */ - atomic_t nr_dispatched; /* number of requests gone to the drivers */ - - /* IO History tracking */ - /* Thinktime */ - unsigned long last_end_request; - unsigned long ttime_total; - unsigned long ttime_samples; - unsigned long ttime_mean; - /* Layout pattern */ - unsigned int seek_samples; - sector_t last_request_pos; - u64 seek_total; - sector_t seek_mean; -}; - struct cfq_queue; struct cfq_io_context { void *key; @@ -78,7 +52,6 @@ struct io_context { unsigned long last_waited; /* Time last woken after wait for request */ int nr_batch_requests; /* Number of requests left in the batch */ - struct as_io_context *aic; struct radix_tree_root radix_root; struct hlist_head cic_list; void *ioc_data; -- cgit v1.2.3 From e03a72e13648ac6277bf2bab6b8324d51f89c0fa Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Mon, 11 Jan 2010 03:21:51 -0500 Subject: block: Stop using byte offsets All callers of the stacking functions use 512-byte sector units rather than byte offsets. Simplify the code so the stacking functions take sectors when specifying data offsets. Signed-off-by: Martin K. Petersen Signed-off-by: Jens Axboe --- block/blk-settings.c | 26 +++++++++----------------- fs/partitions/check.c | 7 ++++--- include/linux/blkdev.h | 17 +++++------------ 3 files changed, 18 insertions(+), 32 deletions(-) (limited to 'block') diff --git a/block/blk-settings.c b/block/blk-settings.c index 5eeb9e0d256e..78549c723783 100644 --- a/block/blk-settings.c +++ b/block/blk-settings.c @@ -507,7 +507,7 @@ static unsigned int lcm(unsigned int a, unsigned int b) * blk_stack_limits - adjust queue_limits for stacked devices * @t: the stacking driver limits (top device) * @b: the underlying queue limits (bottom, component device) - * @offset: offset to beginning of data within component device + * @start: first data sector within component device * * Description: * This function is used by stacking drivers like MD and DM to ensure @@ -525,10 +525,9 @@ static unsigned int lcm(unsigned int a, unsigned int b) * the alignment_offset is undefined. */ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, - sector_t offset) + sector_t start) { - sector_t alignment; - unsigned int top, bottom, ret = 0; + unsigned int top, bottom, alignment, ret = 0; t->max_sectors = min_not_zero(t->max_sectors, b->max_sectors); t->max_hw_sectors = min_not_zero(t->max_hw_sectors, b->max_hw_sectors); @@ -548,7 +547,7 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, t->misaligned |= b->misaligned; - alignment = queue_limit_alignment_offset(b, offset); + alignment = queue_limit_alignment_offset(b, start); /* Bottom device has different alignment. Check that it is * compatible with the current top alignment. @@ -611,11 +610,7 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, /* Discard alignment and granularity */ if (b->discard_granularity) { - unsigned int granularity = b->discard_granularity; - offset &= granularity - 1; - - alignment = (granularity + b->discard_alignment - offset) - & (granularity - 1); + alignment = queue_limit_discard_alignment(b, start); if (t->discard_granularity != 0 && t->discard_alignment != alignment) { @@ -657,7 +652,7 @@ int bdev_stack_limits(struct queue_limits *t, struct block_device *bdev, start += get_start_sect(bdev); - return blk_stack_limits(t, &bq->limits, start << 9); + return blk_stack_limits(t, &bq->limits, start); } EXPORT_SYMBOL(bdev_stack_limits); @@ -668,9 +663,8 @@ EXPORT_SYMBOL(bdev_stack_limits); * @offset: offset to beginning of data within component device * * Description: - * Merges the limits for two queues. Returns 0 if alignment - * didn't change. Returns -1 if adding the bottom device caused - * misalignment. + * Merges the limits for a top level gendisk and a bottom level + * block_device. */ void disk_stack_limits(struct gendisk *disk, struct block_device *bdev, sector_t offset) @@ -678,9 +672,7 @@ void disk_stack_limits(struct gendisk *disk, struct block_device *bdev, struct request_queue *t = disk->queue; struct request_queue *b = bdev_get_queue(bdev); - offset += get_start_sect(bdev) << 9; - - if (blk_stack_limits(&t->limits, &b->limits, offset) < 0) { + if (bdev_stack_limits(&t->limits, bdev, offset >> 9) < 0) { char top[BDEVNAME_SIZE], bottom[BDEVNAME_SIZE]; disk_name(disk, 0, top); diff --git a/fs/partitions/check.c b/fs/partitions/check.c index 64bc8998ac9a..e8865c11777f 100644 --- a/fs/partitions/check.c +++ b/fs/partitions/check.c @@ -412,9 +412,10 @@ struct hd_struct *add_partition(struct gendisk *disk, int partno, pdev = part_to_dev(p); p->start_sect = start; - p->alignment_offset = queue_sector_alignment_offset(disk->queue, start); - p->discard_alignment = queue_sector_discard_alignment(disk->queue, - start); + p->alignment_offset = + queue_limit_alignment_offset(&disk->queue->limits, start); + p->discard_alignment = + queue_limit_discard_alignment(&disk->queue->limits, start); p->nr_sects = len; p->partno = partno; p->policy = get_disk_ro(disk); diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 5c8018977efa..ffb13ad35716 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -1112,18 +1112,13 @@ static inline int queue_alignment_offset(struct request_queue *q) return q->limits.alignment_offset; } -static inline int queue_limit_alignment_offset(struct queue_limits *lim, sector_t offset) +static inline int queue_limit_alignment_offset(struct queue_limits *lim, sector_t sector) { unsigned int granularity = max(lim->physical_block_size, lim->io_min); + unsigned int alignment = (sector << 9) & (granularity - 1); - offset &= granularity - 1; - return (granularity + lim->alignment_offset - offset) & (granularity - 1); -} - -static inline int queue_sector_alignment_offset(struct request_queue *q, - sector_t sector) -{ - return queue_limit_alignment_offset(&q->limits, sector << 9); + return (granularity + lim->alignment_offset - alignment) + & (granularity - 1); } static inline int bdev_alignment_offset(struct block_device *bdev) @@ -1147,10 +1142,8 @@ static inline int queue_discard_alignment(struct request_queue *q) return q->limits.discard_alignment; } -static inline int queue_sector_discard_alignment(struct request_queue *q, - sector_t sector) +static inline int queue_limit_discard_alignment(struct queue_limits *lim, sector_t sector) { - struct queue_limits *lim = &q->limits; unsigned int alignment = (sector << 9) & (lim->discard_granularity - 1); return (lim->discard_granularity + lim->discard_alignment - alignment) -- cgit v1.2.3 From 875feb63b9567442be73efbcc9a8470e376d6423 Mon Sep 17 00:00:00 2001 From: Divyesh Shah Date: Wed, 6 Jan 2010 18:58:20 -0800 Subject: cfq-iosched: Respect ioprio_class when preempting In cfq_should_preempt(), we currently allow some cases where a non-RT request can preempt an ongoing RT cfqq timeslice. This should not happen. Examples include: o A sync_noidle wl type non-RT request pre-empting a sync_noidle wl type cfqq on which we are idling. o Once we have per-cgroup async queues, a non-RT sync request pre-empting a RT async cfqq. Signed-off-by: Divyesh Shah Signed-off-by: Jens Axboe --- block/cfq-iosched.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'block') diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 918c7fd9aeb1..ee130f14d1fc 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -3076,6 +3076,12 @@ cfq_should_preempt(struct cfq_data *cfqd, struct cfq_queue *new_cfqq, if (cfq_class_idle(cfqq)) return true; + /* + * Don't allow a non-RT request to preempt an ongoing RT cfqq timeslice. + */ + if (cfq_class_rt(cfqq) && !cfq_class_rt(new_cfqq)) + return false; + /* * if the new request is sync, but the currently running queue is * not, let the sync request have priority. -- cgit v1.2.3 From 488991e28e55b4fbca8067edf0259f69d1a6f92c Mon Sep 17 00:00:00 2001 From: "Alan D. Brunelle" Date: Fri, 29 Jan 2010 09:04:08 +0100 Subject: block: Added in stricter no merge semantics for block I/O Updated 'nomerges' tunable to accept a value of '2' - indicating that _no_ merges at all are to be attempted (not even the simple one-hit cache). The following table illustrates the additional benefit - 5 minute runs of a random I/O load were applied to a dozen devices on a 16-way x86_64 system. nomerges Throughput %System Improvement (tput / %sys) -------- ------------ ----------- ------------------------- 0 12.45 MB/sec 0.669365609 1 12.50 MB/sec 0.641519199 0.40% / 2.71% 2 12.52 MB/sec 0.639849750 0.56% / 2.96% Signed-off-by: Alan D. Brunelle Signed-off-by: Jens Axboe --- Documentation/ABI/testing/sysfs-block | 14 ++++++++++++++ Documentation/block/queue-sysfs.txt | 10 +++++----- block/blk-sysfs.c | 11 +++++++---- block/elevator.c | 11 ++++++++++- include/linux/blkdev.h | 3 +++ 5 files changed, 39 insertions(+), 10 deletions(-) (limited to 'block') diff --git a/Documentation/ABI/testing/sysfs-block b/Documentation/ABI/testing/sysfs-block index d2f90334bb93..4873c759d535 100644 --- a/Documentation/ABI/testing/sysfs-block +++ b/Documentation/ABI/testing/sysfs-block @@ -128,3 +128,17 @@ Description: preferred request size for workloads where sustained throughput is desired. If no optimal I/O size is reported this file contains 0. + +What: /sys/block//queue/nomerges +Date: January 2010 +Contact: +Description: + Standard I/O elevator operations include attempts to + merge contiguous I/Os. For known random I/O loads these + attempts will always fail and result in extra cycles + being spent in the kernel. This allows one to turn off + this behavior on one of two ways: When set to 1, complex + merge checks are disabled, but the simple one-shot merges + with the previous I/O request are enabled. When set to 2, + all merge tries are disabled. The default value is 0 - + which enables all types of merge tries. diff --git a/Documentation/block/queue-sysfs.txt b/Documentation/block/queue-sysfs.txt index e164403f60e1..f65274081c8d 100644 --- a/Documentation/block/queue-sysfs.txt +++ b/Documentation/block/queue-sysfs.txt @@ -25,11 +25,11 @@ size allowed by the hardware. nomerges (RW) ------------- -This enables the user to disable the lookup logic involved with IO merging -requests in the block layer. Merging may still occur through a direct -1-hit cache, since that comes for (almost) free. The IO scheduler will not -waste cycles doing tree/hash lookups for merges if nomerges is 1. Defaults -to 0, enabling all merges. +This enables the user to disable the lookup logic involved with IO +merging requests in the block layer. By default (0) all merges are +enabled. When set to 1 only simple one-hit merges will be tried. When +set to 2 no merge algorithms will be tried (including one-hit or more +complex tree/hash lookups). nr_requests (RW) ---------------- diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c index 8606c9543fdd..e85442415db3 100644 --- a/block/blk-sysfs.c +++ b/block/blk-sysfs.c @@ -189,7 +189,8 @@ static ssize_t queue_nonrot_store(struct request_queue *q, const char *page, static ssize_t queue_nomerges_show(struct request_queue *q, char *page) { - return queue_var_show(blk_queue_nomerges(q), page); + return queue_var_show((blk_queue_nomerges(q) << 1) | + blk_queue_noxmerges(q), page); } static ssize_t queue_nomerges_store(struct request_queue *q, const char *page, @@ -199,10 +200,12 @@ static ssize_t queue_nomerges_store(struct request_queue *q, const char *page, ssize_t ret = queue_var_store(&nm, page, count); spin_lock_irq(q->queue_lock); - if (nm) + queue_flag_clear(QUEUE_FLAG_NOMERGES, q); + queue_flag_clear(QUEUE_FLAG_NOXMERGES, q); + if (nm == 2) queue_flag_set(QUEUE_FLAG_NOMERGES, q); - else - queue_flag_clear(QUEUE_FLAG_NOMERGES, q); + else if (nm) + queue_flag_set(QUEUE_FLAG_NOXMERGES, q); spin_unlock_irq(q->queue_lock); return ret; diff --git a/block/elevator.c b/block/elevator.c index 9ad5ccc4c5ee..ee3a883840f2 100644 --- a/block/elevator.c +++ b/block/elevator.c @@ -473,6 +473,15 @@ int elv_merge(struct request_queue *q, struct request **req, struct bio *bio) struct request *__rq; int ret; + /* + * Levels of merges: + * nomerges: No merges at all attempted + * noxmerges: Only simple one-hit cache try + * merges: All merge tries attempted + */ + if (blk_queue_nomerges(q)) + return ELEVATOR_NO_MERGE; + /* * First try one-hit cache. */ @@ -484,7 +493,7 @@ int elv_merge(struct request_queue *q, struct request **req, struct bio *bio) } } - if (blk_queue_nomerges(q)) + if (blk_queue_noxmerges(q)) return ELEVATOR_NO_MERGE; /* diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index ffb13ad35716..f71f5c58620c 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -463,6 +463,7 @@ struct request_queue #define QUEUE_FLAG_IO_STAT 15 /* do IO stats */ #define QUEUE_FLAG_CQ 16 /* hardware does queuing */ #define QUEUE_FLAG_DISCARD 17 /* supports DISCARD */ +#define QUEUE_FLAG_NOXMERGES 18 /* No extended merges */ #define QUEUE_FLAG_DEFAULT ((1 << QUEUE_FLAG_IO_STAT) | \ (1 << QUEUE_FLAG_CLUSTER) | \ @@ -589,6 +590,8 @@ enum { #define blk_queue_queuing(q) test_bit(QUEUE_FLAG_CQ, &(q)->queue_flags) #define blk_queue_stopped(q) test_bit(QUEUE_FLAG_STOPPED, &(q)->queue_flags) #define blk_queue_nomerges(q) test_bit(QUEUE_FLAG_NOMERGES, &(q)->queue_flags) +#define blk_queue_noxmerges(q) \ + test_bit(QUEUE_FLAG_NOXMERGES, &(q)->queue_flags) #define blk_queue_nonrot(q) test_bit(QUEUE_FLAG_NONROT, &(q)->queue_flags) #define blk_queue_io_stat(q) test_bit(QUEUE_FLAG_IO_STAT, &(q)->queue_flags) #define blk_queue_flushing(q) ((q)->ordseq) -- cgit v1.2.3 From bcf4dd43424cdfd8195f3955300a579fe58e9911 Mon Sep 17 00:00:00 2001 From: Gui Jianfeng Date: Mon, 1 Feb 2010 09:58:54 +0100 Subject: blk-cgroup: Fix potential deadlock in blk-cgroup I triggered a lockdep warning as following. ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.33-rc2 #1 ------------------------------------------------------- test_io_control/7357 is trying to acquire lock: (blkio_list_lock){+.+...}, at: [] blkiocg_weight_write+0x82/0x9e but task is already holding lock: (&(&blkcg->lock)->rlock){......}, at: [] blkiocg_weight_write+0x3b/0x9e which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&(&blkcg->lock)->rlock){......}: [] validate_chain+0x8bc/0xb9c [] __lock_acquire+0x723/0x789 [] lock_acquire+0x90/0xa7 [] _raw_spin_lock_irqsave+0x27/0x5a [] blkiocg_add_blkio_group+0x1a/0x6d [] cfq_get_queue+0x225/0x3de [] cfq_set_request+0x217/0x42d [] elv_set_request+0x17/0x26 [] get_request+0x203/0x2c5 [] get_request_wait+0x18/0x10e [] __make_request+0x2ba/0x375 [] generic_make_request+0x28d/0x30f [] submit_bio+0x8a/0x8f [] submit_bh+0xf0/0x10f [] ll_rw_block+0xc0/0xf9 [] ext3_find_entry+0x319/0x544 [ext3] [] ext3_lookup+0x2c/0xb9 [ext3] [] do_lookup+0xd3/0x172 [] link_path_walk+0x5fb/0x95c [] path_walk+0x3c/0x81 [] do_path_lookup+0x21/0x8a [] do_filp_open+0xf0/0x978 [] open_exec+0x1b/0xb7 [] do_execve+0xbb/0x266 [] sys_execve+0x24/0x4a [] ptregs_execve+0x12/0x18 -> #1 (&(&q->__queue_lock)->rlock){..-.-.}: [] validate_chain+0x8bc/0xb9c [] __lock_acquire+0x723/0x789 [] lock_acquire+0x90/0xa7 [] _raw_spin_lock_irqsave+0x27/0x5a [] cfq_unlink_blkio_group+0x17/0x41 [] blkiocg_destroy+0x72/0xc7 [] cgroup_diput+0x4a/0xb2 [] dentry_iput+0x93/0xb7 [] d_kill+0x1c/0x36 [] dput+0xf5/0xfe [] do_rmdir+0x95/0xbe [] sys_rmdir+0x10/0x12 [] sysenter_do_call+0x12/0x32 -> #0 (blkio_list_lock){+.+...}: [] validate_chain+0x61c/0xb9c [] __lock_acquire+0x723/0x789 [] lock_acquire+0x90/0xa7 [] _raw_spin_lock+0x1e/0x4e [] blkiocg_weight_write+0x82/0x9e [] cgroup_file_write+0xc6/0x1c0 [] vfs_write+0x8c/0x116 [] sys_write+0x3b/0x60 [] sysenter_do_call+0x12/0x32 other info that might help us debug this: 1 lock held by test_io_control/7357: #0: (&(&blkcg->lock)->rlock){......}, at: [] blkiocg_weight_write+0x3b/0x9e stack backtrace: Pid: 7357, comm: test_io_control Not tainted 2.6.33-rc2 #1 Call Trace: [] print_circular_bug+0x91/0x9d [] validate_chain+0x61c/0xb9c [] __lock_acquire+0x723/0x789 [] lock_acquire+0x90/0xa7 [] ? blkiocg_weight_write+0x82/0x9e [] _raw_spin_lock+0x1e/0x4e [] ? blkiocg_weight_write+0x82/0x9e [] blkiocg_weight_write+0x82/0x9e [] cgroup_file_write+0xc6/0x1c0 [] ? trace_hardirqs_off+0xb/0xd [] ? cpu_clock+0x2e/0x44 [] ? security_file_permission+0xf/0x11 [] ? rw_verify_area+0x8a/0xad [] ? cgroup_file_write+0x0/0x1c0 [] vfs_write+0x8c/0x116 [] sys_write+0x3b/0x60 [] sysenter_do_call+0x12/0x32 To prevent deadlock, we should take locks as following sequence: blkio_list_lock -> queue_lock -> blkcg_lock. The following patch should fix this bug. Signed-off-by: Gui Jianfeng Signed-off-by: Jens Axboe --- block/blk-cgroup.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'block') diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c index 1fa2654db0a6..e7dbbaf5fb3e 100644 --- a/block/blk-cgroup.c +++ b/block/blk-cgroup.c @@ -147,16 +147,16 @@ blkiocg_weight_write(struct cgroup *cgroup, struct cftype *cftype, u64 val) return -EINVAL; blkcg = cgroup_to_blkio_cgroup(cgroup); + spin_lock(&blkio_list_lock); spin_lock_irq(&blkcg->lock); blkcg->weight = (unsigned int)val; hlist_for_each_entry(blkg, n, &blkcg->blkg_list, blkcg_node) { - spin_lock(&blkio_list_lock); list_for_each_entry(blkiop, &blkio_list, list) blkiop->ops.blkio_update_group_weight_fn(blkg, blkcg->weight); - spin_unlock(&blkio_list_lock); } spin_unlock_irq(&blkcg->lock); + spin_unlock(&blkio_list_lock); return 0; } -- cgit v1.2.3 From 1efe8fe1c2240acc476bed77740883df63373862 Mon Sep 17 00:00:00 2001 From: Vivek Goyal Date: Tue, 2 Feb 2010 20:45:46 +0100 Subject: cfq-iosched: Do not idle on async queues Few weeks back, Shaohua Li had posted similar patch. I am reposting it with more test results. This patch does two things. - Do not idle on async queues. - It also changes the write queue depth CFQ drives (cfq_may_dispatch()). Currently, we seem to driving queue depth of 1 always for WRITES. This is true even if there is only one write queue in the system and all the logic of infinite queue depth in case of single busy queue as well as slowly increasing queue depth based on last delayed sync request does not seem to be kicking in at all. This patch will allow deeper WRITE queue depths (subjected to the other WRITE queue depth contstraints like cfq_quantum and last delayed sync request). Shaohua Li had reported getting more out of his SSD. For me, I have got one Lun exported from an HP EVA and when pure buffered writes are on, I can get more out of the system. Following are test results of pure buffered writes (with end_fsync=1) with vanilla and patched kernel. These results are average of 3 sets of run with increasing number of threads. AVERAGE[bufwfs][vanilla] ------- job Set NR ReadBW(KB/s) MaxClat(us) WriteBW(KB/s) MaxClat(us) --- --- -- ------------ ----------- ------------- ----------- bufwfs 3 1 0 0 95349 474141 bufwfs 3 2 0 0 100282 806926 bufwfs 3 4 0 0 109989 2.7301e+06 bufwfs 3 8 0 0 116642 3762231 bufwfs 3 16 0 0 118230 6902970 AVERAGE[bufwfs] [patched kernel] ------- bufwfs 3 1 0 0 270722 404352 bufwfs 3 2 0 0 206770 1.06552e+06 bufwfs 3 4 0 0 195277 1.62283e+06 bufwfs 3 8 0 0 260960 2.62979e+06 bufwfs 3 16 0 0 299260 1.70731e+06 I also ran buffered writes along with some sequential reads and some buffered reads going on in the system on a SATA disk because the potential risk could be that we should not be driving queue depth higher in presence of sync IO going to keep the max clat low. With some random and sequential reads going on in the system on one SATA disk I did not see any significant increase in max clat. So it looks like other WRITE queue depth control logic is doing its job. Here are the results. AVERAGE[brr, bsr, bufw together] [vanilla] ------- job Set NR ReadBW(KB/s) MaxClat(us) WriteBW(KB/s) MaxClat(us) --- --- -- ------------ ----------- ------------- ----------- brr 3 1 850 546345 0 0 bsr 3 1 14650 729543 0 0 bufw 3 1 0 0 23908 8274517 brr 3 2 981.333 579395 0 0 bsr 3 2 14149.7 1175689 0 0 bufw 3 2 0 0 21921 1.28108e+07 brr 3 4 898.333 1.75527e+06 0 0 bsr 3 4 12230.7 1.40072e+06 0 0 bufw 3 4 0 0 19722.3 2.4901e+07 brr 3 8 900 3160594 0 0 bsr 3 8 9282.33 1.91314e+06 0 0 bufw 3 8 0 0 18789.3 23890622 AVERAGE[brr, bsr, bufw mixed] [patched kernel] ------- job Set NR ReadBW(KB/s) MaxClat(us) WriteBW(KB/s) MaxClat(us) --- --- -- ------------ ----------- ------------- ----------- brr 3 1 837 417973 0 0 bsr 3 1 14357.7 591275 0 0 bufw 3 1 0 0 24869.7 8910662 brr 3 2 1038.33 543434 0 0 bsr 3 2 13351.3 1205858 0 0 bufw 3 2 0 0 18626.3 13280370 brr 3 4 913 1.86861e+06 0 0 bsr 3 4 12652.3 1430974 0 0 bufw 3 4 0 0 15343.3 2.81305e+07 brr 3 8 890 2.92695e+06 0 0 bsr 3 8 9635.33 1.90244e+06 0 0 bufw 3 8 0 0 17200.3 24424392 So looks like it might make sense to include this patch. Thanks Vivek Signed-off-by: Vivek Goyal Signed-off-by: Jens Axboe --- block/cfq-iosched.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'block') diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index ee130f14d1fc..17b768d0d42f 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -1803,7 +1803,7 @@ static bool cfq_should_idle(struct cfq_data *cfqd, struct cfq_queue *cfqq) * Otherwise, we do only if they are the last ones * in their service tree. */ - return service_tree->count == 1; + return service_tree->count == 1 && cfq_cfqq_sync(cfqq); } static void cfq_arm_slice_timer(struct cfq_data *cfqd) -- cgit v1.2.3 From ae54abed636d18f7939c965f21ad126001dbe34c Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Fri, 5 Feb 2010 13:11:45 +0100 Subject: cfq-iosched: split seeky coop queues after one slice Currently we split seeky coop queues after 1s, which is too big. Below patch marks seeky coop queue split_coop flag after one slice. After that, if new requests come in, the queues will be splitted. Patch is suggested by Corrado. Signed-off-by: Shaohua Li Reviewed-by: Corrado Zoccolo Acked-by: Jeff Moyer Signed-off-by: Jens Axboe --- block/cfq-iosched.c | 49 ++++++++++++++++--------------------------------- 1 file changed, 16 insertions(+), 33 deletions(-) (limited to 'block') diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 17b768d0d42f..023f4e69a337 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -42,16 +42,13 @@ static const int cfq_hist_divisor = 4; */ #define CFQ_MIN_TT (2) -/* - * Allow merged cfqqs to perform this amount of seeky I/O before - * deciding to break the queues up again. - */ -#define CFQQ_COOP_TOUT (HZ) - #define CFQ_SLICE_SCALE (5) #define CFQ_HW_QUEUE_MIN (5) #define CFQ_SERVICE_SHIFT 12 +#define CFQQ_SEEK_THR 8 * 1024 +#define CFQQ_SEEKY(cfqq) ((cfqq)->seek_mean > CFQQ_SEEK_THR) + #define RQ_CIC(rq) \ ((struct cfq_io_context *) (rq)->elevator_private) #define RQ_CFQQ(rq) (struct cfq_queue *) ((rq)->elevator_private2) @@ -137,7 +134,6 @@ struct cfq_queue { u64 seek_total; sector_t seek_mean; sector_t last_request_pos; - unsigned long seeky_start; pid_t pid; @@ -314,6 +310,7 @@ enum cfqq_state_flags { CFQ_CFQQ_FLAG_slice_new, /* no requests dispatched in slice */ CFQ_CFQQ_FLAG_sync, /* synchronous queue */ CFQ_CFQQ_FLAG_coop, /* cfqq is shared */ + CFQ_CFQQ_FLAG_split_coop, /* shared cfqq will be splitted */ CFQ_CFQQ_FLAG_deep, /* sync cfqq experienced large depth */ CFQ_CFQQ_FLAG_wait_busy, /* Waiting for next request */ }; @@ -342,6 +339,7 @@ CFQ_CFQQ_FNS(prio_changed); CFQ_CFQQ_FNS(slice_new); CFQ_CFQQ_FNS(sync); CFQ_CFQQ_FNS(coop); +CFQ_CFQQ_FNS(split_coop); CFQ_CFQQ_FNS(deep); CFQ_CFQQ_FNS(wait_busy); #undef CFQ_CFQQ_FNS @@ -1565,6 +1563,15 @@ __cfq_slice_expired(struct cfq_data *cfqd, struct cfq_queue *cfqq, cfq_clear_cfqq_wait_request(cfqq); cfq_clear_cfqq_wait_busy(cfqq); + /* + * If this cfqq is shared between multiple processes, check to + * make sure that those processes are still issuing I/Os within + * the mean seek distance. If not, it may be time to break the + * queues apart again. + */ + if (cfq_cfqq_coop(cfqq) && CFQQ_SEEKY(cfqq)) + cfq_mark_cfqq_split_coop(cfqq); + /* * store what was left of this slice, if the queue idled/timed out */ @@ -1663,9 +1670,6 @@ static inline sector_t cfq_dist_from_last(struct cfq_data *cfqd, return cfqd->last_position - blk_rq_pos(rq); } -#define CFQQ_SEEK_THR 8 * 1024 -#define CFQQ_SEEKY(cfqq) ((cfqq)->seek_mean > CFQQ_SEEK_THR) - static inline int cfq_rq_close(struct cfq_data *cfqd, struct cfq_queue *cfqq, struct request *rq, bool for_preempt) { @@ -3000,19 +3004,6 @@ cfq_update_io_seektime(struct cfq_data *cfqd, struct cfq_queue *cfqq, total = cfqq->seek_total + (cfqq->seek_samples/2); do_div(total, cfqq->seek_samples); cfqq->seek_mean = (sector_t)total; - - /* - * If this cfqq is shared between multiple processes, check to - * make sure that those processes are still issuing I/Os within - * the mean seek distance. If not, it may be time to break the - * queues apart again. - */ - if (cfq_cfqq_coop(cfqq)) { - if (CFQQ_SEEKY(cfqq) && !cfqq->seeky_start) - cfqq->seeky_start = jiffies; - else if (!CFQQ_SEEKY(cfqq)) - cfqq->seeky_start = 0; - } } /* @@ -3453,14 +3444,6 @@ cfq_merge_cfqqs(struct cfq_data *cfqd, struct cfq_io_context *cic, return cic_to_cfqq(cic, 1); } -static int should_split_cfqq(struct cfq_queue *cfqq) -{ - if (cfqq->seeky_start && - time_after(jiffies, cfqq->seeky_start + CFQQ_COOP_TOUT)) - return 1; - return 0; -} - /* * Returns NULL if a new cfqq should be allocated, or the old cfqq if this * was the last process referring to said cfqq. @@ -3469,9 +3452,9 @@ static struct cfq_queue * split_cfqq(struct cfq_io_context *cic, struct cfq_queue *cfqq) { if (cfqq_process_refs(cfqq) == 1) { - cfqq->seeky_start = 0; cfqq->pid = current->pid; cfq_clear_cfqq_coop(cfqq); + cfq_clear_cfqq_split_coop(cfqq); return cfqq; } @@ -3510,7 +3493,7 @@ new_queue: /* * If the queue was seeky for too long, break it apart. */ - if (cfq_cfqq_coop(cfqq) && should_split_cfqq(cfqq)) { + if (cfq_cfqq_coop(cfqq) && cfq_cfqq_split_coop(cfqq)) { cfq_log_cfqq(cfqd, cfqq, "breaking apart cfqq"); cfqq = split_cfqq(cic, cfqq); if (!cfqq) -- cgit v1.2.3 From 3ad2f3fbb961429d2aa627465ae4829758bc7e07 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 3 Feb 2010 08:01:28 +0800 Subject: tree-wide: Assorted spelling fixes In particular, several occurances of funny versions of 'success', 'unknown', 'therefore', 'acknowledge', 'argument', 'achieve', 'address', 'beginning', 'desirable', 'separate' and 'necessary' are fixed. Signed-off-by: Daniel Mack Cc: Joe Perches Cc: Junio C Hamano Signed-off-by: Jiri Kosina --- Documentation/DocBook/mtdnand.tmpl | 6 +++--- Documentation/DocBook/v4l/common.xml | 2 +- Documentation/DocBook/v4l/vidioc-g-parm.xml | 2 +- Documentation/arm/Samsung-S3C24XX/CPUfreq.txt | 4 ++-- Documentation/hwmon/abituguru | 2 +- Documentation/input/rotary-encoder.txt | 2 +- Documentation/networking/skfp.txt | 2 +- Documentation/s390/kvm.txt | 2 +- Documentation/scsi/ChangeLog.lpfc | 10 +++++----- Documentation/trace/ftrace.txt | 2 +- arch/arm/mach-ep93xx/micro9.c | 2 +- arch/arm/mach-nomadik/board-nhk8815.c | 2 +- arch/arm/mach-u300/core.c | 4 ++-- arch/arm/mach-u300/include/mach/debug-macro.S | 2 +- arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h | 2 +- arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h | 2 +- arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h | 2 +- arch/cris/arch-v10/lib/old_checksum.c | 2 +- arch/cris/arch-v32/mm/tlb.c | 2 +- arch/h8300/include/asm/io.h | 2 +- arch/ia64/sn/kernel/setup.c | 2 +- arch/m68k/atari/atakeyb.c | 2 +- arch/m68k/include/asm/io_no.h | 2 +- arch/powerpc/boot/dts/kmeter1.dts | 2 +- arch/s390/include/asm/cio.h | 2 +- arch/s390/kernel/sclp.S | 2 +- arch/sparc/kernel/leon_kernel.c | 2 +- arch/sparc/kernel/perf_event.c | 2 +- arch/x86/crypto/twofish-i586-asm_32.S | 10 +++++----- arch/x86/crypto/twofish-x86_64-asm_64.S | 20 ++++++++++---------- arch/x86/kernel/head_64.S | 2 +- arch/x86/kernel/pci-calgary_64.c | 2 +- arch/x86/kernel/tsc.c | 2 +- arch/xtensa/kernel/entry.S | 4 ++-- block/bsg.c | 2 +- drivers/acpi/dock.c | 2 +- drivers/ata/libata-sff.c | 2 +- drivers/ata/pata_acpi.c | 2 +- drivers/ata/pata_hpt3x3.c | 2 +- drivers/ata/pata_pcmcia.c | 2 +- drivers/block/drbd/drbd_int.h | 4 ++-- drivers/block/drbd/drbd_req.h | 2 +- drivers/char/agp/intel-agp.c | 2 +- drivers/char/applicom.c | 2 +- drivers/char/hvc_iseries.c | 2 +- drivers/char/hw_random/n2-drv.c | 2 +- drivers/char/ip2/i2hw.h | 2 +- drivers/char/pty.c | 2 +- drivers/char/tty_io.c | 2 +- drivers/char/vt.c | 2 +- drivers/dma/coh901318_lli.h | 2 +- drivers/gpu/drm/nouveau/nouveau_bios.c | 2 +- drivers/gpu/drm/nouveau/nouveau_drv.h | 2 +- drivers/gpu/drm/via/via_irq.c | 4 ++-- drivers/i2c/busses/i2c-pxa.c | 2 +- drivers/infiniband/hw/ehca/ehca_qes.h | 4 ++-- drivers/infiniband/hw/ehca/ehca_reqs.c | 2 +- drivers/input/misc/yealink.h | 2 +- drivers/isdn/i4l/isdn_common.c | 2 +- drivers/media/dvb/dvb-core/dvb_frontend.h | 8 ++++---- drivers/media/video/bt8xx/bttv-cards.c | 4 ++-- drivers/media/video/gspca/ov519.c | 2 +- drivers/media/video/pwc/philips.txt | 2 +- drivers/media/video/sn9c102/sn9c102_sensor.h | 2 +- drivers/media/video/tea6420.c | 2 +- drivers/mfd/sm501.c | 8 ++++---- drivers/mmc/host/mxcmmc.c | 2 +- drivers/mtd/chips/jedec_probe.c | 2 +- drivers/mtd/nand/bcm_umi_nand.c | 4 ++-- drivers/mtd/nand/mxc_nand.c | 2 +- drivers/net/atlx/atl2.h | 2 +- drivers/net/chelsio/sge.c | 2 +- drivers/net/e1000e/82571.c | 2 +- drivers/net/e1000e/lib.c | 2 +- drivers/net/igb/igb_main.c | 2 +- drivers/net/irda/sa1100_ir.c | 2 +- drivers/net/qlge/qlge_ethtool.c | 2 +- drivers/net/qlge/qlge_main.c | 2 +- drivers/net/sfc/regs.h | 2 +- drivers/net/smsc9420.c | 2 +- drivers/net/spider_net.c | 4 ++-- drivers/net/sungem.c | 2 +- drivers/net/tehuti.c | 2 +- drivers/net/tokenring/tms380tr.c | 4 ++-- drivers/net/tun.c | 2 +- drivers/net/ucc_geth.c | 2 +- drivers/net/wimax/i2400m/fw.c | 2 +- drivers/net/wimax/i2400m/i2400m.h | 2 +- drivers/net/wimax/i2400m/sdio.c | 4 ++-- drivers/net/wimax/i2400m/usb.c | 4 ++-- drivers/net/wireless/ath/ar9170/main.c | 2 +- drivers/net/wireless/iwmc3200wifi/lmac.h | 2 +- drivers/net/wireless/rt2x00/rt2500usb.c | 4 ++-- drivers/net/wireless/rt2x00/rt2800usb.c | 4 ++-- drivers/net/wireless/rt2x00/rt2x00debug.c | 2 +- drivers/net/wireless/rt2x00/rt2x00dev.c | 2 +- drivers/net/wireless/rt2x00/rt2x00queue.c | 2 +- drivers/net/wireless/rt2x00/rt61pci.c | 2 +- drivers/net/wireless/rt2x00/rt73usb.c | 6 +++--- drivers/s390/char/raw3270.c | 2 +- drivers/s390/char/sclp.c | 2 +- drivers/scsi/a100u2w.c | 2 +- drivers/scsi/initio.c | 2 +- drivers/scsi/libfc/fc_fcp.c | 2 +- drivers/scsi/lpfc/lpfc_els.c | 4 ++-- drivers/scsi/pcmcia/nsp_cs.h | 2 +- drivers/scsi/pm8001/pm8001_hwi.c | 2 +- drivers/scsi/pm8001/pm8001_sas.c | 2 +- drivers/scsi/pmcraid.h | 2 +- drivers/scsi/sd.c | 2 +- drivers/spi/spi_s3c24xx.c | 2 +- drivers/usb/musb/musb_regs.h | 2 +- drivers/usb/serial/cypress_m8.c | 2 +- drivers/video/omap/lcdc.c | 2 +- drivers/video/s1d13xxxfb.c | 4 ++-- drivers/video/sm501fb.c | 2 +- fs/affs/bitmap.c | 2 +- fs/binfmt_elf_fdpic.c | 2 +- fs/cifs/cifs_dfs_ref.c | 2 +- fs/cifs/cifssmb.c | 2 +- fs/ext4/move_extent.c | 2 +- fs/fuse/inode.c | 2 +- fs/gfs2/ops_fstype.c | 2 +- fs/jbd/transaction.c | 2 +- fs/nfsd/nfs4xdr.c | 2 +- fs/ocfs2/dlmglue.c | 2 +- fs/ocfs2/extent_map.c | 2 +- fs/reiserfs/bitmap.c | 2 +- include/linux/hil.h | 16 ++++++++-------- include/linux/lru_cache.h | 2 +- include/linux/sched.h | 2 +- include/media/davinci/vpfe_capture.h | 2 +- net/ipv4/tcp_timer.c | 2 +- net/mac80211/mesh_plink.c | 2 +- net/netfilter/nf_conntrack_sip.c | 4 ++-- net/netfilter/xt_hashlimit.c | 2 +- net/sctp/sm_sideeffect.c | 2 +- scripts/gfp-translate | 2 +- sound/pci/rme9652/hdspm.c | 2 +- sound/soc/codecs/wm8990.c | 2 +- tools/perf/util/hist.c | 2 +- 141 files changed, 192 insertions(+), 192 deletions(-) (limited to 'block') diff --git a/Documentation/DocBook/mtdnand.tmpl b/Documentation/DocBook/mtdnand.tmpl index 5e7d84b48505..133cd6c3f3c1 100644 --- a/Documentation/DocBook/mtdnand.tmpl +++ b/Documentation/DocBook/mtdnand.tmpl @@ -488,7 +488,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip) The ECC bytes must be placed immidiately after the data bytes in order to make the syndrome generator work. This is contrary to the usual layout used by software ECC. The - seperation of data and out of band area is not longer + separation of data and out of band area is not longer possible. The nand driver code handles this layout and the remaining free bytes in the oob area are managed by the autoplacement code. Provide a matching oob-layout @@ -560,7 +560,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip) bad blocks. They have factory marked good blocks. The marker pattern is erased when the block is erased to be reused. So in case of powerloss before writing the pattern back to the chip this block - would be lost and added to the bad blocks. Therefor we scan the + would be lost and added to the bad blocks. Therefore we scan the chip(s) when we detect them the first time for good blocks and store this information in a bad block table before erasing any of the blocks. @@ -1094,7 +1094,7 @@ in this page manufacturers specifications. This applies similar to the spare area. - Therefor NAND aware filesystems must either write in page size chunks + Therefore NAND aware filesystems must either write in page size chunks or hold a writebuffer to collect smaller writes until they sum up to pagesize. Available NAND aware filesystems: JFFS2, YAFFS. diff --git a/Documentation/DocBook/v4l/common.xml b/Documentation/DocBook/v4l/common.xml index c65f0ac9b6ee..cea23e1c4fc6 100644 --- a/Documentation/DocBook/v4l/common.xml +++ b/Documentation/DocBook/v4l/common.xml @@ -1170,7 +1170,7 @@ frames per second. If less than this number of frames is to be captured or output, applications can request frame skipping or duplicating on the driver side. This is especially useful when using the &func-read; or &func-write;, which are not augmented by timestamps -or sequence counters, and to avoid unneccessary data copying. +or sequence counters, and to avoid unnecessary data copying. Finally these ioctls can be used to determine the number of buffers used internally by a driver in read/write mode. For diff --git a/Documentation/DocBook/v4l/vidioc-g-parm.xml b/Documentation/DocBook/v4l/vidioc-g-parm.xml index 78332d365ce9..392aa9e5571e 100644 --- a/Documentation/DocBook/v4l/vidioc-g-parm.xml +++ b/Documentation/DocBook/v4l/vidioc-g-parm.xml @@ -55,7 +55,7 @@ captured or output, applications can request frame skipping or duplicating on the driver side. This is especially useful when using the read() or write(), which are not augmented by timestamps or sequence counters, and to avoid -unneccessary data copying. +unnecessary data copying. Further these ioctls can be used to determine the number of buffers used internally by a driver in read/write mode. For diff --git a/Documentation/arm/Samsung-S3C24XX/CPUfreq.txt b/Documentation/arm/Samsung-S3C24XX/CPUfreq.txt index 76b3a11e90be..fa968aa99d67 100644 --- a/Documentation/arm/Samsung-S3C24XX/CPUfreq.txt +++ b/Documentation/arm/Samsung-S3C24XX/CPUfreq.txt @@ -14,8 +14,8 @@ Introduction how the clocks are arranged. The first implementation used as single PLL to feed the ARM, memory and peripherals via a series of dividers and muxes and this is the implementation that is documented here. A - newer version where there is a seperate PLL and clock divider for the - ARM core is available as a seperate driver. + newer version where there is a separate PLL and clock divider for the + ARM core is available as a separate driver. Layout diff --git a/Documentation/hwmon/abituguru b/Documentation/hwmon/abituguru index 87ffa0f5ec70..5eb3b9d5f0d5 100644 --- a/Documentation/hwmon/abituguru +++ b/Documentation/hwmon/abituguru @@ -30,7 +30,7 @@ Supported chips: bank1_types=1,1,0,0,0,0,0,2,0,0,0,0,2,0,0,1 You may also need to specify the fan_sensors option for these boards fan_sensors=5 - 2) There is a seperate abituguru3 driver for these motherboards, + 2) There is a separate abituguru3 driver for these motherboards, the abituguru (without the 3 !) driver will not work on these motherboards (and visa versa)! diff --git a/Documentation/input/rotary-encoder.txt b/Documentation/input/rotary-encoder.txt index 3a6aec40c0b0..8b4129de1d2d 100644 --- a/Documentation/input/rotary-encoder.txt +++ b/Documentation/input/rotary-encoder.txt @@ -75,7 +75,7 @@ and the number of steps or will clamp at the maximum and zero depending on the configuration. Because GPIO to IRQ mapping is platform specific, this information must -be given in seperately to the driver. See the example below. +be given in separately to the driver. See the example below. ------------------ diff --git a/Documentation/networking/skfp.txt b/Documentation/networking/skfp.txt index abfddf81e34a..203ec66c9fb4 100644 --- a/Documentation/networking/skfp.txt +++ b/Documentation/networking/skfp.txt @@ -68,7 +68,7 @@ Compaq adapters (not tested): ======================= From v2.01 on, the driver is integrated in the linux kernel sources. -Therefor, the installation is the same as for any other adapter +Therefore, the installation is the same as for any other adapter supported by the kernel. Refer to the manual of your distribution about the installation of network adapters. diff --git a/Documentation/s390/kvm.txt b/Documentation/s390/kvm.txt index 6f5ceb0f09fc..85f3280d7ef6 100644 --- a/Documentation/s390/kvm.txt +++ b/Documentation/s390/kvm.txt @@ -102,7 +102,7 @@ args: unsigned long see also: include/linux/kvm.h This ioctl stores the state of the cpu at the guest real address given as argument, unless one of the following values defined in include/linux/kvm.h -is given as arguement: +is given as argument: KVM_S390_STORE_STATUS_NOADDR - the CPU stores its status to the save area in absolute lowcore as defined by the principles of operation KVM_S390_STORE_STATUS_PREFIXED - the CPU stores its status to the save area in diff --git a/Documentation/scsi/ChangeLog.lpfc b/Documentation/scsi/ChangeLog.lpfc index ff19a52fe004..2ffc1148eb95 100644 --- a/Documentation/scsi/ChangeLog.lpfc +++ b/Documentation/scsi/ChangeLog.lpfc @@ -989,8 +989,8 @@ Changes from 20040709 to 20040716 * Remove redundant port_cmp != 2 check in if (!port_cmp) { .... if (port_cmp != 2).... } * Clock changes: removed struct clk_data and timerList. - * Clock changes: seperate nodev_tmo and els_retry_delay into 2 - seperate timers and convert to 1 argument changed + * Clock changes: separate nodev_tmo and els_retry_delay into 2 + separate timers and convert to 1 argument changed LPFC_NODE_FARP_PEND_t to struct lpfc_node_farp_pend convert ipfarp_tmo to 1 argument convert target struct tmofunc and rtplunfunc to 1 argument * cr_count, cr_delay and @@ -1514,7 +1514,7 @@ Changes from 20040402 to 20040409 * Remove unused elxclock declaration in elx_sli.h. * Since everywhere IOCB_ENTRY is used, the return value is cast, move the cast into the macro. - * Split ioctls out into seperate files + * Split ioctls out into separate files Changes from 20040326 to 20040402 @@ -1534,7 +1534,7 @@ Changes from 20040326 to 20040402 * Unused variable cleanup * Use Linux list macros for DMABUF_t * Break up ioctls into 3 sections, dfc, util, hbaapi - rearranged code so this could be easily seperated into a + rearranged code so this could be easily separated into a differnet module later All 3 are currently turned on by defines in lpfc_ioctl.c LPFC_DFC_IOCTL, LPFC_UTIL_IOCTL, LPFC_HBAAPI_IOCTL @@ -1551,7 +1551,7 @@ Changes from 20040326 to 20040402 started by lpfc_online(). lpfc_offline() only stopped els_timeout routine. It now stops all timeout routines associated with that hba. - * Replace seperate next and prev pointers in struct + * Replace separate next and prev pointers in struct lpfc_bindlist with list_head type. In elxHBA_t, replace fc_nlpbind_start and _end with fc_nlpbind_list and use list_head macros to access it. diff --git a/Documentation/trace/ftrace.txt b/Documentation/trace/ftrace.txt index bab3040da548..03485bfbd797 100644 --- a/Documentation/trace/ftrace.txt +++ b/Documentation/trace/ftrace.txt @@ -1588,7 +1588,7 @@ module author does not need to worry about it. When tracing is enabled, kstop_machine is called to prevent races with the CPUS executing code being modified (which can -cause the CPU to do undesireable things), and the nops are +cause the CPU to do undesirable things), and the nops are patched back to calls. But this time, they do not call mcount (which is just a function stub). They now call into the ftrace infrastructure. diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c index f3757a1c5a10..c33360e82868 100644 --- a/arch/arm/mach-ep93xx/micro9.c +++ b/arch/arm/mach-ep93xx/micro9.c @@ -28,7 +28,7 @@ * * Micro9-High has up to 64MB of 32-bit flash on CS1 * Micro9-Mid has up to 64MB of either 32-bit or 16-bit flash on CS1 - * Micro9-Lite uses a seperate MTD map driver for flash support + * Micro9-Lite uses a separate MTD map driver for flash support * Micro9-Slim has up to 64MB of either 32-bit or 16-bit flash on CS1 *************************************************************************/ static struct physmap_flash_data micro9_flash_data; diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c index 9438bf6613a3..ab3712c86d2b 100644 --- a/arch/arm/mach-nomadik/board-nhk8815.c +++ b/arch/arm/mach-nomadik/board-nhk8815.c @@ -38,7 +38,7 @@ #define SRC_CR_INIT_MASK 0x00007fff #define SRC_CR_INIT_VAL 0x2aaa8000 -/* These adresses span 16MB, so use three individual pages */ +/* These addresses span 16MB, so use three individual pages */ static struct resource nhk8815_nand_resources[] = { { .name = "nand_addr", diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index 653e25be3dd8..d0cb5e940776 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -356,7 +356,7 @@ static struct resource ave_resources[] = { /* * The AVE3e requires two regions of 256MB that it considers * "invisible". The hardware will not be able to access these - * adresses, so they should never point to system RAM. + * addresses, so they should never point to system RAM. */ { .name = "AVE3e Reserved 0", @@ -571,7 +571,7 @@ static void __init u300_init_check_chip(void) /* * Some devices and their resources require reserved physical memory from * the end of the available RAM. This function traverses the list of devices - * and assigns actual adresses to these. + * and assigns actual addresses to these. */ static void __init u300_assign_physmem(void) { diff --git a/arch/arm/mach-u300/include/mach/debug-macro.S b/arch/arm/mach-u300/include/mach/debug-macro.S index f3a1cbbeeab3..d591fe13ed13 100644 --- a/arch/arm/mach-u300/include/mach/debug-macro.S +++ b/arch/arm/mach-u300/include/mach/debug-macro.S @@ -11,7 +11,7 @@ #include .macro addruart,rx - /* If we move the adress using MMU, use this. */ + /* If we move the address using MMU, use this. */ mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? ldreq \rx, = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address diff --git a/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h index 652e2bbdaa20..dda19da037ad 100644 --- a/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h +++ b/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h @@ -78,7 +78,7 @@ extern int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip, * others = Special functions (dependant on bank) * * Note, since the code to deal with the case where there are two control - * registers instead of one, we do not have a seperate set of functions for + * registers instead of one, we do not have a separate set of functions for * each case. */ extern int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, diff --git a/arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h b/arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h index 36a85f5000c8..a111ad871833 100644 --- a/arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h +++ b/arch/arm/plat-s3c/include/plat/regs-usb-hsotg-phy.h @@ -12,7 +12,7 @@ * published by the Free Software Foundation. */ -/* Note, this is a seperate header file as some of the clock framework +/* Note, this is a separate header file as some of the clock framework * needs to touch this if the clk_48m is used as the USB OHCI or other * peripheral source. */ diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h index 33d421d78bad..d623235ae961 100644 --- a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h +++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h @@ -135,7 +135,7 @@ struct s3c_cpufreq_config { * @locktime_m: The lock-time in uS for the MPLL. * @locktime_u: The lock-time in uS for the UPLL. * @locttime_bits: The number of bits each LOCKTIME field. - * @need_pll: Set if this driver needs to change the PLL values to acheive + * @need_pll: Set if this driver needs to change the PLL values to achieve * any frequency changes. This is really only need by devices like the * S3C2410 where there is no or limited divider between the PLL and the * ARMCLK. diff --git a/arch/cris/arch-v10/lib/old_checksum.c b/arch/cris/arch-v10/lib/old_checksum.c index 1734b467efa6..8f79163f1394 100644 --- a/arch/cris/arch-v10/lib/old_checksum.c +++ b/arch/cris/arch-v10/lib/old_checksum.c @@ -77,7 +77,7 @@ __wsum csum_partial(const void *p, int len, __wsum __sum) sum += *buff++; if (endMarker > buff) - sum += *(const u8 *)buff; /* add extra byte seperately */ + sum += *(const u8 *)buff; /* add extra byte separately */ BITOFF; return (__force __wsum)sum; diff --git a/arch/cris/arch-v32/mm/tlb.c b/arch/cris/arch-v32/mm/tlb.c index 6779bcb28ab0..c030d020660a 100644 --- a/arch/cris/arch-v32/mm/tlb.c +++ b/arch/cris/arch-v32/mm/tlb.c @@ -189,7 +189,7 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next, spin_unlock(&mmu_context_lock); /* - * Remember the pgd for the fault handlers. Keep a seperate + * Remember the pgd for the fault handlers. Keep a separate * copy of it because current and active_mm might be invalid * at points where * there's still a need to derefer the pgd. */ diff --git a/arch/h8300/include/asm/io.h b/arch/h8300/include/asm/io.h index 33e842f3284b..c1a8df22080f 100644 --- a/arch/h8300/include/asm/io.h +++ b/arch/h8300/include/asm/io.h @@ -25,7 +25,7 @@ * memory location directly. */ /* ++roman: The assignments to temp. vars avoid that gcc sometimes generates - * two accesses to memory, which may be undesireable for some devices. + * two accesses to memory, which may be undesirable for some devices. */ /* diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c index ece1bf994499..c6c6d9381126 100644 --- a/arch/ia64/sn/kernel/setup.c +++ b/arch/ia64/sn/kernel/setup.c @@ -241,7 +241,7 @@ static void __cpuinit sn_check_for_wars(void) * Note: This stuff is duped here because Altix requires the PCDP to * locate a usable VGA device due to lack of proper ACPI support. Structures * could be used from drivers/firmware/pcdp.h, but it was decided that moving - * this file to a more public location just for Altix use was undesireable. + * this file to a more public location just for Altix use was undesirable. */ struct hcdp_uart_desc { diff --git a/arch/m68k/atari/atakeyb.c b/arch/m68k/atari/atakeyb.c index 4add96d13b19..5890897d28bf 100644 --- a/arch/m68k/atari/atakeyb.c +++ b/arch/m68k/atari/atakeyb.c @@ -121,7 +121,7 @@ KEYBOARD_STATE kb_state; * bytes have been lost and in which state of the packet structure we are now. * This usually causes keyboards bytes to be interpreted as mouse movements * and vice versa, which is very annoying. It seems better to throw away some - * bytes (that are usually mouse bytes) than to misinterpret them. Therefor I + * bytes (that are usually mouse bytes) than to misinterpret them. Therefore I * introduced the RESYNC state for IKBD data. In this state, the bytes up to * one that really looks like a key event (0x04..0xf2) or the start of a mouse * packet (0xf8..0xfb) are thrown away, but at most 2 bytes. This at least diff --git a/arch/m68k/include/asm/io_no.h b/arch/m68k/include/asm/io_no.h index 359065d5a9f2..6e2413e518cb 100644 --- a/arch/m68k/include/asm/io_no.h +++ b/arch/m68k/include/asm/io_no.h @@ -16,7 +16,7 @@ * memory location directly. */ /* ++roman: The assignments to temp. vars avoid that gcc sometimes generates - * two accesses to memory, which may be undesireable for some devices. + * two accesses to memory, which may be undesirable for some devices. */ /* diff --git a/arch/powerpc/boot/dts/kmeter1.dts b/arch/powerpc/boot/dts/kmeter1.dts index 65b8b4f27efe..d8b5d12fb663 100644 --- a/arch/powerpc/boot/dts/kmeter1.dts +++ b/arch/powerpc/boot/dts/kmeter1.dts @@ -490,7 +490,7 @@ compatible = "cfi-flash"; /* * The Intel P30 chip has 2 non-identical chips on - * one die, so we need to define 2 seperate regions + * one die, so we need to define 2 separate regions * that are scanned by physmap_of independantly. */ reg = <0 0x00000000 0x02000000 diff --git a/arch/s390/include/asm/cio.h b/arch/s390/include/asm/cio.h index e85679af54dd..e34347d567a6 100644 --- a/arch/s390/include/asm/cio.h +++ b/arch/s390/include/asm/cio.h @@ -20,7 +20,7 @@ /** * struct ccw1 - channel command word * @cmd_code: command code - * @flags: flags, like IDA adressing, etc. + * @flags: flags, like IDA addressing, etc. * @count: byte count * @cda: data address * diff --git a/arch/s390/kernel/sclp.S b/arch/s390/kernel/sclp.S index e27ca63076d1..27c1a2e236d1 100644 --- a/arch/s390/kernel/sclp.S +++ b/arch/s390/kernel/sclp.S @@ -221,7 +221,7 @@ _sclp_print: lh %r9,0(%r8) # update sccb length ar %r9,%r6 sth %r9,0(%r8) - ar %r7,%r6 # update current mto adress + ar %r7,%r6 # update current mto address ltr %r0,%r0 # more characters? jnz .LinitmtoS4 l %r2,.LwritedataS4-.LbaseS4(%r13)# write data diff --git a/arch/sparc/kernel/leon_kernel.c b/arch/sparc/kernel/leon_kernel.c index 87f1760c0aa2..554e0b80bcde 100644 --- a/arch/sparc/kernel/leon_kernel.c +++ b/arch/sparc/kernel/leon_kernel.c @@ -124,7 +124,7 @@ void __init leon_init_timers(irq_handler_t counter_fn) if (!(LEON3_BYPASS_LOAD_PA(&leon3_gptimer_regs->config) & (1< -/* return adress at 0 */ +/* return address at 0 */ #define in_blk 12 /* input byte array address parameter*/ #define out_blk 8 /* output byte array address parameter*/ @@ -230,8 +230,8 @@ twofish_enc_blk: push %edi mov tfm + 16(%esp), %ebp /* abuse the base pointer: set new base bointer to the crypto tfm */ - add $crypto_tfm_ctx_offset, %ebp /* ctx adress */ - mov in_blk+16(%esp),%edi /* input adress in edi */ + add $crypto_tfm_ctx_offset, %ebp /* ctx address */ + mov in_blk+16(%esp),%edi /* input address in edi */ mov (%edi), %eax mov b_offset(%edi), %ebx @@ -286,8 +286,8 @@ twofish_dec_blk: mov tfm + 16(%esp), %ebp /* abuse the base pointer: set new base bointer to the crypto tfm */ - add $crypto_tfm_ctx_offset, %ebp /* ctx adress */ - mov in_blk+16(%esp),%edi /* input adress in edi */ + add $crypto_tfm_ctx_offset, %ebp /* ctx address */ + mov in_blk+16(%esp),%edi /* input address in edi */ mov (%edi), %eax mov b_offset(%edi), %ebx diff --git a/arch/x86/crypto/twofish-x86_64-asm_64.S b/arch/x86/crypto/twofish-x86_64-asm_64.S index 35974a586615..573aa102542e 100644 --- a/arch/x86/crypto/twofish-x86_64-asm_64.S +++ b/arch/x86/crypto/twofish-x86_64-asm_64.S @@ -221,11 +221,11 @@ twofish_enc_blk: pushq R1 - /* %rdi contains the crypto tfm adress */ - /* %rsi contains the output adress */ - /* %rdx contains the input adress */ - add $crypto_tfm_ctx_offset, %rdi /* set ctx adress */ - /* ctx adress is moved to free one non-rex register + /* %rdi contains the crypto tfm address */ + /* %rsi contains the output address */ + /* %rdx contains the input address */ + add $crypto_tfm_ctx_offset, %rdi /* set ctx address */ + /* ctx address is moved to free one non-rex register as target for the 8bit high operations */ mov %rdi, %r11 @@ -274,11 +274,11 @@ twofish_enc_blk: twofish_dec_blk: pushq R1 - /* %rdi contains the crypto tfm adress */ - /* %rsi contains the output adress */ - /* %rdx contains the input adress */ - add $crypto_tfm_ctx_offset, %rdi /* set ctx adress */ - /* ctx adress is moved to free one non-rex register + /* %rdi contains the crypto tfm address */ + /* %rsi contains the output address */ + /* %rdx contains the input address */ + add $crypto_tfm_ctx_offset, %rdi /* set ctx address */ + /* ctx address is moved to free one non-rex register as target for the 8bit high operations */ mov %rdi, %r11 diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S index 2d8b5035371c..3d1e6f16b7a6 100644 --- a/arch/x86/kernel/head_64.S +++ b/arch/x86/kernel/head_64.S @@ -27,7 +27,7 @@ #define GET_CR2_INTO_RCX movq %cr2, %rcx #endif -/* we are not able to switch in one step to the final KERNEL ADRESS SPACE +/* we are not able to switch in one step to the final KERNEL ADDRESS SPACE * because we need identity-mapped pages. * */ diff --git a/arch/x86/kernel/pci-calgary_64.c b/arch/x86/kernel/pci-calgary_64.c index 2bbde6078143..fb99f7edb341 100644 --- a/arch/x86/kernel/pci-calgary_64.c +++ b/arch/x86/kernel/pci-calgary_64.c @@ -1309,7 +1309,7 @@ static void calgary_init_bitmap_from_tce_table(struct iommu_table *tbl) /* * get_tce_space_from_tar(): * Function for kdump case. Get the tce tables from first kernel - * by reading the contents of the base adress register of calgary iommu + * by reading the contents of the base address register of calgary iommu */ static void __init get_tce_space_from_tar(void) { diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index 597683aa5ba0..dec8f68e3eda 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -50,7 +50,7 @@ u64 native_sched_clock(void) * unstable. We do this because unlike Time Of Day, * the scheduler clock tolerates small errors and it's * very important for it to be as fast as the platform - * can achive it. ) + * can achieve it. ) */ if (unlikely(tsc_disabled)) { /* No locking but a rare wrong value is not a big deal: */ diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S index 80d24c485fd3..77fc9f6dc016 100644 --- a/arch/xtensa/kernel/entry.S +++ b/arch/xtensa/kernel/entry.S @@ -104,7 +104,7 @@ * excsave has been restored, and * stack pointer (a1) has been set. * - * Note: _user_exception might be at an odd adress. Don't use call0..call12 + * Note: _user_exception might be at an odd address. Don't use call0..call12 */ ENTRY(user_exception) @@ -244,7 +244,7 @@ _user_exception: * excsave has been restored, and * stack pointer (a1) has been set. * - * Note: _kernel_exception might be at an odd adress. Don't use call0..call12 + * Note: _kernel_exception might be at an odd address. Don't use call0..call12 */ ENTRY(kernel_exception) diff --git a/block/bsg.c b/block/bsg.c index a9fd2d84b53a..46597a6bd112 100644 --- a/block/bsg.c +++ b/block/bsg.c @@ -260,7 +260,7 @@ bsg_map_hdr(struct bsg_device *bd, struct sg_io_v4 *hdr, fmode_t has_write_perm, return ERR_PTR(ret); /* - * map scatter-gather elements seperately and string them to request + * map scatter-gather elements separately and string them to request */ rq = blk_get_request(q, rw, GFP_KERNEL); if (!rq) diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c index bbc2c1315c47..d7f363f9435f 100644 --- a/drivers/acpi/dock.c +++ b/drivers/acpi/dock.c @@ -605,7 +605,7 @@ register_hotplug_dock_device(acpi_handle handle, struct acpi_dock_ops *ops, list_for_each_entry(dock_station, &dock_stations, sibling) { /* * An ATA bay can be in a dock and itself can be ejected - * seperately, so there are two 'dock stations' which need the + * separately, so there are two 'dock stations' which need the * ops */ dd = find_dock_dependent_device(dock_station, handle); diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 741065c9da67..7f2c94a07c00 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -2258,7 +2258,7 @@ EXPORT_SYMBOL_GPL(ata_sff_postreset); * @qc: command * * Drain the FIFO and device of any stuck data following a command - * failing to complete. In some cases this is neccessary before a + * failing to complete. In some cases this is necessary before a * reset will recover the device. * */ diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c index d8f35fe44421..9e33da9565d9 100644 --- a/drivers/ata/pata_acpi.c +++ b/drivers/ata/pata_acpi.c @@ -161,7 +161,7 @@ static void pacpi_set_dmamode(struct ata_port *ap, struct ata_device *adev) * * Called when the libata layer is about to issue a command. We wrap * this interface so that we can load the correct ATA timings if - * neccessary. + * necessary. */ static unsigned int pacpi_qc_issue(struct ata_queued_cmd *qc) diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c index c86c71639a95..727a81ce4c9f 100644 --- a/drivers/ata/pata_hpt3x3.c +++ b/drivers/ata/pata_hpt3x3.c @@ -180,7 +180,7 @@ static void hpt3x3_init_chipset(struct pci_dev *dev) * @id: Entry in match table * * Perform basic initialisation. We set the device up so we access all - * ports via BAR4. This is neccessary to work around errata. + * ports via BAR4. This is necessary to work around errata. */ static int hpt3x3_init_one(struct pci_dev *pdev, const struct pci_device_id *id) diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index 1b392c9e8531..416aebb8b913 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -131,7 +131,7 @@ static unsigned int ata_data_xfer_8bit(struct ata_device *dev, * @qc: command * * Drain the FIFO and device of any stuck data following a command - * failing to complete. In some cases this is neccessary before a + * failing to complete. In some cases this is necessary before a * reset will recover the device. * */ diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h index 2bf3a6ef3684..d9301e861d9f 100644 --- a/drivers/block/drbd/drbd_int.h +++ b/drivers/block/drbd/drbd_int.h @@ -95,7 +95,7 @@ extern char usermode_helper[]; /* All EEs on the free list should have ID_VACANT (== 0) * freshly allocated EEs get !ID_VACANT (== 1) - * so if it says "cannot dereference null pointer at adress 0x00000001", + * so if it says "cannot dereference null pointer at address 0x00000001", * it is most likely one of these :( */ #define ID_IN_SYNC (4711ULL) @@ -1171,7 +1171,7 @@ extern int drbd_bitmap_io(struct drbd_conf *mdev, int (*io_fn)(struct drbd_conf /* Meta data layout We reserve a 128MB Block (4k aligned) * either at the end of the backing device - * or on a seperate meta data device. */ + * or on a separate meta data device. */ #define MD_RESERVED_SECT (128LU << 11) /* 128 MB, unit sectors */ /* The following numbers are sectors */ diff --git a/drivers/block/drbd/drbd_req.h b/drivers/block/drbd/drbd_req.h index f22c1bc8ec7e..16119d7056cc 100644 --- a/drivers/block/drbd/drbd_req.h +++ b/drivers/block/drbd/drbd_req.h @@ -57,7 +57,7 @@ * * It may me handed over to the local disk subsystem. * It may be completed by the local disk subsystem, - * either sucessfully or with io-error. + * either successfully or with io-error. * In case it is a READ request, and it failed locally, * it may be retried remotely. * diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index 3999a5f25f38..45a22f9bfec2 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -269,7 +269,7 @@ static void intel_agp_insert_sg_entries(struct agp_memory *mem, j++; } } else { - /* sg may merge pages, but we have to seperate + /* sg may merge pages, but we have to separate * per-page addr for GTT */ unsigned int len, m; diff --git a/drivers/char/applicom.c b/drivers/char/applicom.c index fe2cb2f5db17..a7424bf7eacf 100644 --- a/drivers/char/applicom.c +++ b/drivers/char/applicom.c @@ -14,7 +14,7 @@ /* et passe en argument a acinit, mais est scrute sur le bus pour s'adapter */ /* au nombre de cartes presentes sur le bus. IOCL code 6 affichait V2.4.3 */ /* F.LAFORSE 28/11/95 creation de fichiers acXX.o avec les differentes */ -/* adresses de base des cartes, IOCTL 6 plus complet */ +/* addresses de base des cartes, IOCTL 6 plus complet */ /* J.PAGET le 19/08/96 copie de la version V2.6 en V2.8.0 sans modification */ /* de code autre que le texte V2.6.1 en V2.8.0 */ /*****************************************************************************/ diff --git a/drivers/char/hvc_iseries.c b/drivers/char/hvc_iseries.c index 936d05bf37fa..0794925d8042 100644 --- a/drivers/char/hvc_iseries.c +++ b/drivers/char/hvc_iseries.c @@ -353,7 +353,7 @@ static void hvc_close_event(struct HvLpEvent *event) if (!hvlpevent_is_int(event)) { printk(KERN_WARNING - "hvc: got unexpected close acknowlegement\n"); + "hvc: got unexpected close acknowledgement\n"); return; } diff --git a/drivers/char/hw_random/n2-drv.c b/drivers/char/hw_random/n2-drv.c index 9b3e09cd41f9..10f868eefaa6 100644 --- a/drivers/char/hw_random/n2-drv.c +++ b/drivers/char/hw_random/n2-drv.c @@ -71,7 +71,7 @@ MODULE_VERSION(DRV_MODULE_VERSION); * x22 + x21 + x17 + x15 + x13 + x12 + x11 + x7 + x5 + x + 1 * * The RNG_CTL_VCO value of each noise cell must be programmed - * seperately. This is why 4 control register values must be provided + * separately. This is why 4 control register values must be provided * to the hypervisor. During a write, the hypervisor writes them all, * one at a time, to the actual RNG_CTL register. The first three * values are used to setup the desired RNG_CTL_VCO for each entropy diff --git a/drivers/char/ip2/i2hw.h b/drivers/char/ip2/i2hw.h index 8aa6e7ab8d5b..c0ba6c05f0cd 100644 --- a/drivers/char/ip2/i2hw.h +++ b/drivers/char/ip2/i2hw.h @@ -559,7 +559,7 @@ Loadware may be sent to the board in two ways: 2) It may be hard-coded into your source by including a .h file (typically supplied by Computone), which declares a data array and initializes every - element. This acheives the same result as if an entire loadware file had + element. This achieves the same result as if an entire loadware file had been read into the array. This requires more data space in your program, but access to the file system diff --git a/drivers/char/pty.c b/drivers/char/pty.c index 385c44b3034f..5ee424817263 100644 --- a/drivers/char/pty.c +++ b/drivers/char/pty.c @@ -220,7 +220,7 @@ static void pty_set_termios(struct tty_struct *tty, * @tty: tty being resized * @ws: window size being set. * - * Update the termios variables and send the neccessary signals to + * Update the termios variables and send the necessary signals to * peform a terminal resize correctly */ diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index c6f3b48be9dd..56b11c1c7aeb 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -2026,7 +2026,7 @@ static int tiocgwinsz(struct tty_struct *tty, struct winsize __user *arg) * @rows: rows (character) * @cols: cols (character) * - * Update the termios variables and send the neccessary signals to + * Update the termios variables and send the necessary signals to * peform a terminal resize correctly */ diff --git a/drivers/char/vt.c b/drivers/char/vt.c index 94f530a29691..bd1d1164fec5 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -821,7 +821,7 @@ static inline int resize_screen(struct vc_data *vc, int width, int height, * * Resize a virtual console, clipping according to the actual constraints. * If the caller passes a tty structure then update the termios winsize - * information and perform any neccessary signal handling. + * information and perform any necessary signal handling. * * Caller must hold the console semaphore. Takes the termios mutex and * ctrl_lock of the tty IFF a tty is passed. diff --git a/drivers/dma/coh901318_lli.h b/drivers/dma/coh901318_lli.h index 7bf713b79c6b..7a5c80990e9e 100644 --- a/drivers/dma/coh901318_lli.h +++ b/drivers/dma/coh901318_lli.h @@ -30,7 +30,7 @@ struct device; * @pool: pool handle * @dev: dma device * @lli_nbr: number of lli:s in the pool - * @algin: adress alignemtn of lli:s + * @algin: address alignemtn of lli:s * returns 0 on success otherwise none zero */ int coh901318_pool_create(struct coh901318_pool *pool, diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c index d7f8d8b4a4b8..52fb371784e1 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bios.c +++ b/drivers/gpu/drm/nouveau/nouveau_bios.c @@ -3544,7 +3544,7 @@ int nouveau_bios_parse_lvds_table(struct drm_device *dev, int pxclk, bool *dl, b * at which modes should be set up in the dual link style. * * Following the header, the BMP (ver 0xa) table has several records, - * indexed by a seperate xlat table, indexed in turn by the fp strap in + * indexed by a separate xlat table, indexed in turn by the fp strap in * EXTDEV_BOOT. Each record had a config byte, followed by 6 script * numbers for use by INIT_SUB which controlled panel init and power, * and finally a dword of ms to sleep between power off and on diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h index 6b9690418bc7..23664058690f 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drv.h +++ b/drivers/gpu/drm/nouveau/nouveau_drv.h @@ -544,7 +544,7 @@ struct drm_nouveau_private { uint32_t ramro_offset; uint32_t ramro_size; - /* base physical adresses */ + /* base physical addresses */ uint64_t fb_phys; uint64_t fb_available_size; uint64_t fb_mappable_pages; diff --git a/drivers/gpu/drm/via/via_irq.c b/drivers/gpu/drm/via/via_irq.c index 5935b8842e86..34079f251cd4 100644 --- a/drivers/gpu/drm/via/via_irq.c +++ b/drivers/gpu/drm/via/via_irq.c @@ -150,7 +150,7 @@ irqreturn_t via_driver_irq_handler(DRM_IRQ_ARGS) cur_irq++; } - /* Acknowlege interrupts */ + /* Acknowledge interrupts */ VIA_WRITE(VIA_REG_INTERRUPT, status); @@ -165,7 +165,7 @@ static __inline__ void viadrv_acknowledge_irqs(drm_via_private_t * dev_priv) u32 status; if (dev_priv) { - /* Acknowlege interrupts */ + /* Acknowledge interrupts */ status = VIA_READ(VIA_REG_INTERRUPT); VIA_WRITE(VIA_REG_INTERRUPT, status | dev_priv->irq_pending_mask); diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index 7647a20523a0..90ffbf6f9d4f 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -12,7 +12,7 @@ * * History: * Apr 2002: Initial version [CS] - * Jun 2002: Properly seperated algo/adap [FB] + * Jun 2002: Properly separated algo/adap [FB] * Jan 2003: Fixed several bugs concerning interrupt handling [Kai-Uwe Bloem] * Jan 2003: added limited signal handling [Kai-Uwe Bloem] * Sep 2004: Major rework to ensure efficient bus handling [RMK] diff --git a/drivers/infiniband/hw/ehca/ehca_qes.h b/drivers/infiniband/hw/ehca/ehca_qes.h index 5d28e3e98a20..90c4efa67586 100644 --- a/drivers/infiniband/hw/ehca/ehca_qes.h +++ b/drivers/infiniband/hw/ehca/ehca_qes.h @@ -46,7 +46,7 @@ #include "ehca_tools.h" -/* virtual scatter gather entry to specify remote adresses with length */ +/* virtual scatter gather entry to specify remote addresses with length */ struct ehca_vsgentry { u64 vaddr; u32 lkey; @@ -148,7 +148,7 @@ struct ehca_wqe { u32 immediate_data; union { struct { - u64 remote_virtual_adress; + u64 remote_virtual_address; u32 rkey; u32 reserved; u64 atomic_1st_op_dma_len; diff --git a/drivers/infiniband/hw/ehca/ehca_reqs.c b/drivers/infiniband/hw/ehca/ehca_reqs.c index e3ec7fdd67bd..9a3fbfca9b41 100644 --- a/drivers/infiniband/hw/ehca/ehca_reqs.c +++ b/drivers/infiniband/hw/ehca/ehca_reqs.c @@ -269,7 +269,7 @@ static inline int ehca_write_swqe(struct ehca_qp *qp, /* no break is intentional here */ case IB_QPT_RC: /* TODO: atomic not implemented */ - wqe_p->u.nud.remote_virtual_adress = + wqe_p->u.nud.remote_virtual_address = send_wr->wr.rdma.remote_addr; wqe_p->u.nud.rkey = send_wr->wr.rdma.rkey; diff --git a/drivers/input/misc/yealink.h b/drivers/input/misc/yealink.h index 48af0be9cbdf..1e0f52397010 100644 --- a/drivers/input/misc/yealink.h +++ b/drivers/input/misc/yealink.h @@ -127,7 +127,7 @@ struct yld_ctl_packet { * yld_status struct. */ -/* LCD, each segment must be driven seperately. +/* LCD, each segment must be driven separately. * * Layout: * diff --git a/drivers/isdn/i4l/isdn_common.c b/drivers/isdn/i4l/isdn_common.c index adb1e8c36b46..00c60e2e0ff7 100644 --- a/drivers/isdn/i4l/isdn_common.c +++ b/drivers/isdn/i4l/isdn_common.c @@ -1347,7 +1347,7 @@ isdn_ioctl(struct inode *inode, struct file *file, uint cmd, ulong arg) /* * isdn net devices manage lots of configuration variables as linked lists. * Those lists must only be manipulated from user space. Some of the ioctl's - * service routines access user space and are not atomic. Therefor, ioctl's + * service routines access user space and are not atomic. Therefore, ioctl's * manipulating the lists and ioctl's sleeping while accessing the lists * are serialized by means of a semaphore. */ diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.h b/drivers/media/dvb/dvb-core/dvb_frontend.h index 52e4ce4304ee..80dda308ff74 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.h +++ b/drivers/media/dvb/dvb-core/dvb_frontend.h @@ -214,14 +214,14 @@ struct dvb_tuner_ops { int (*get_status)(struct dvb_frontend *fe, u32 *status); int (*get_rf_strength)(struct dvb_frontend *fe, u16 *strength); - /** These are provided seperately from set_params in order to facilitate silicon - * tuners which require sophisticated tuning loops, controlling each parameter seperately. */ + /** These are provided separately from set_params in order to facilitate silicon + * tuners which require sophisticated tuning loops, controlling each parameter separately. */ int (*set_frequency)(struct dvb_frontend *fe, u32 frequency); int (*set_bandwidth)(struct dvb_frontend *fe, u32 bandwidth); /* - * These are provided seperately from set_params in order to facilitate silicon - * tuners which require sophisticated tuning loops, controlling each parameter seperately. + * These are provided separately from set_params in order to facilitate silicon + * tuners which require sophisticated tuning loops, controlling each parameter separately. */ int (*set_state)(struct dvb_frontend *fe, enum tuner_param param, struct tuner_state *state); int (*get_state)(struct dvb_frontend *fe, enum tuner_param param, struct tuner_state *state); diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c index 12279f6d9bc4..716870ae85d5 100644 --- a/drivers/media/video/bt8xx/bttv-cards.c +++ b/drivers/media/video/bt8xx/bttv-cards.c @@ -4404,7 +4404,7 @@ static void rv605_muxsel(struct bttv *btv, unsigned int input) /* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning] * * The CS16 (available on eBay cheap) is a PCI board with four Fusion - * 878A chips, a PCI bridge, an Atmel microcontroller, four sync seperator + * 878A chips, a PCI bridge, an Atmel microcontroller, four sync separator * chips, ten eight input analog multiplexors, a not chip and a few * other components. * @@ -4426,7 +4426,7 @@ static void rv605_muxsel(struct bttv *btv, unsigned int input) * * There is an ATMEL microcontroller with an 8031 core on board. I have not * determined what function (if any) it provides. With the microcontroller - * and sync seperator chips a guess is that it might have to do with video + * and sync separator chips a guess is that it might have to do with video * switching and maybe some digital I/O. */ static void tibetCS16_muxsel(struct bttv *btv, unsigned int input) diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c index b4f965731244..e5e4c4440d39 100644 --- a/drivers/media/video/gspca/ov519.c +++ b/drivers/media/video/gspca/ov519.c @@ -503,7 +503,7 @@ static const struct v4l2_pix_format ovfx2_ov3610_mode[] = { /* * The FX2 chip does not give us a zero length read at end of frame. * It does, however, give a short read at the end of a frame, if - * neccessary, rather than run two frames together. + * necessary, rather than run two frames together. * * By choosing the right bulk transfer size, we are guaranteed to always * get a short read for the last read of each frame. Frame sizes are diff --git a/drivers/media/video/pwc/philips.txt b/drivers/media/video/pwc/philips.txt index f9f3584281d8..d38dd791511e 100644 --- a/drivers/media/video/pwc/philips.txt +++ b/drivers/media/video/pwc/philips.txt @@ -33,7 +33,7 @@ a lot of extra information, a FAQ, and the binary plugin 'PWCX'. This plugin contains decompression routines that allow you to use higher image sizes and framerates; in addition the webcam uses less bandwidth on the USB bus (handy if you want to run more than 1 camera simultaneously). These routines fall -under a NDA, and may therefor not be distributed as source; however, its use +under a NDA, and may therefore not be distributed as source; however, its use is completely optional. You can build this code either into your kernel, or as a module. I recommend diff --git a/drivers/media/video/sn9c102/sn9c102_sensor.h b/drivers/media/video/sn9c102/sn9c102_sensor.h index 4af7382da5c5..494957b10bac 100644 --- a/drivers/media/video/sn9c102/sn9c102_sensor.h +++ b/drivers/media/video/sn9c102/sn9c102_sensor.h @@ -120,7 +120,7 @@ extern int sn9c102_write_regs(struct sn9c102_device*, const u8 valreg[][2], /* Write multiple registers with constant values. For example: sn9c102_write_const_regs(cam, {0x00, 0x14}, {0x60, 0x17}, {0x0f, 0x18}); - Register adresses must be < 256. + Register addresses must be < 256. */ #define sn9c102_write_const_regs(sn9c102_device, data...) \ ({ static const u8 _valreg[][2] = {data}; \ diff --git a/drivers/media/video/tea6420.c b/drivers/media/video/tea6420.c index 0446524d3543..6bf6bc7dbc7f 100644 --- a/drivers/media/video/tea6420.c +++ b/drivers/media/video/tea6420.c @@ -6,7 +6,7 @@ The tea6420 is a bus controlled audio-matrix with 5 stereo inputs, 4 stereo outputs and gain control for each output. - It is cascadable, i.e. it can be found at the adresses 0x98 + It is cascadable, i.e. it can be found at the addresses 0x98 and 0x9a on the i2c-bus. For detailed informations download the specifications directly diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c index 0cc5eeff5ee8..10491e4e305d 100644 --- a/drivers/mfd/sm501.c +++ b/drivers/mfd/sm501.c @@ -523,7 +523,7 @@ unsigned long sm501_set_clock(struct device *dev, unsigned long clock = readl(sm->regs + SM501_CURRENT_CLOCK); unsigned char reg; unsigned int pll_reg = 0; - unsigned long sm501_freq; /* the actual frequency acheived */ + unsigned long sm501_freq; /* the actual frequency achieved */ struct sm501_clock to; @@ -533,7 +533,7 @@ unsigned long sm501_set_clock(struct device *dev, switch (clksrc) { case SM501_CLOCK_P2XCLK: - /* This clock is divided in half so to achive the + /* This clock is divided in half so to achieve the * requested frequency the value must be multiplied by * 2. This clock also has an additional pre divisor */ @@ -562,7 +562,7 @@ unsigned long sm501_set_clock(struct device *dev, break; case SM501_CLOCK_V2XCLK: - /* This clock is divided in half so to achive the + /* This clock is divided in half so to achieve the * requested frequency the value must be multiplied by 2. */ sm501_freq = (sm501_select_clock(2 * req_freq, &to, 3) / 2); @@ -648,7 +648,7 @@ unsigned long sm501_find_clock(struct device *dev, unsigned long req_freq) { struct sm501_devdata *sm = dev_get_drvdata(dev); - unsigned long sm501_freq; /* the frequency achiveable by the 501 */ + unsigned long sm501_freq; /* the frequency achieveable by the 501 */ struct sm501_clock to; switch (clksrc) { diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c index 60a2b69e54f5..16cc91c827c9 100644 --- a/drivers/mmc/host/mxcmmc.c +++ b/drivers/mmc/host/mxcmmc.c @@ -4,7 +4,7 @@ * This is a driver for the SDHC controller found in Freescale MX2/MX3 * SoCs. It is basically the same hardware as found on MX1 (imxmmc.c). * Unlike the hardware found on MX1, this hardware just works and does - * not need all the quirks found in imxmmc.c, hence the seperate driver. + * not need all the quirks found in imxmmc.c, hence the separate driver. * * Copyright (C) 2008 Sascha Hauer, Pengutronix * Copyright (C) 2006 Pavel Pisa, PiKRON diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c index 1bec5e1ce6ac..8db1148dfa47 100644 --- a/drivers/mtd/chips/jedec_probe.c +++ b/drivers/mtd/chips/jedec_probe.c @@ -226,7 +226,7 @@ struct unlock_addr { * exists, but is for MTD_UADDR_NOT_SUPPORTED - and, therefore, * should not be used. The problem is that structures with * initializers have extra fields initialized to 0. It is _very_ - * desireable to have the unlock address entries for unsupported + * desirable to have the unlock address entries for unsupported * data widths automatically initialized - that means that * MTD_UADDR_NOT_SUPPORTED must be 0 and the first entry here * must go unused. diff --git a/drivers/mtd/nand/bcm_umi_nand.c b/drivers/mtd/nand/bcm_umi_nand.c index 087bcd745bb7..7d1cca7a31a9 100644 --- a/drivers/mtd/nand/bcm_umi_nand.c +++ b/drivers/mtd/nand/bcm_umi_nand.c @@ -381,7 +381,7 @@ static int __devinit bcm_umi_nand_probe(struct platform_device *pdev) if (!r) return -ENXIO; - /* map physical adress */ + /* map physical address */ bcm_umi_io_base = ioremap(r->start, r->end - r->start + 1); if (!bcm_umi_io_base) { @@ -525,7 +525,7 @@ static int bcm_umi_nand_remove(struct platform_device *pdev) /* Release resources, unregister device */ nand_release(board_mtd); - /* unmap physical adress */ + /* unmap physical address */ iounmap(bcm_umi_io_base); /* Free the MTD device structure */ diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index 45dec5770da0..b2900d8406d3 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -507,7 +507,7 @@ static void mxc_do_addr_cycle(struct mtd_info *mtd, int column, int page_addr) * MXC NANDFC can only perform full page+spare or * spare-only read/write. When the upper layers * layers perform a read/write buf operation, - * we will used the saved column adress to index into + * we will used the saved column address to index into * the full page. */ send_addr(host, 0, page_addr == -1); diff --git a/drivers/net/atlx/atl2.h b/drivers/net/atlx/atl2.h index d918bbe621ea..927e4de6474d 100644 --- a/drivers/net/atlx/atl2.h +++ b/drivers/net/atlx/atl2.h @@ -442,7 +442,7 @@ struct atl2_hw { struct atl2_ring_header { /* pointer to the descriptor ring memory */ void *desc; - /* physical adress of the descriptor ring */ + /* physical address of the descriptor ring */ dma_addr_t dma; /* length of descriptor ring in bytes */ unsigned int size; diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c index 109d2783e4d8..bef02330464d 100644 --- a/drivers/net/chelsio/sge.c +++ b/drivers/net/chelsio/sge.c @@ -248,7 +248,7 @@ static void restart_sched(unsigned long); * * Interrupts are handled by a single CPU and it is likely that on a MP system * the application is migrated to another CPU. In that scenario, we try to - * seperate the RX(in irq context) and TX state in order to decrease memory + * separate the RX(in irq context) and TX state in order to decrease memory * contention. */ struct sge { diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c index 02d67d047d96..dc4eb87309c5 100644 --- a/drivers/net/e1000e/82571.c +++ b/drivers/net/e1000e/82571.c @@ -1363,7 +1363,7 @@ static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw) * * 1) down * 2) autoneg_progress - * 3) autoneg_complete (the link sucessfully autonegotiated) + * 3) autoneg_complete (the link successfully autonegotiated) * 4) forced_up (the link has been forced up, it did not autonegotiate) * **/ diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c index 2fa9b36a2c5a..3af0b1b82832 100644 --- a/drivers/net/e1000e/lib.c +++ b/drivers/net/e1000e/lib.c @@ -587,7 +587,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw) if (!(rxcw & E1000_RXCW_IV)) { mac->serdes_has_link = true; e_dbg("SERDES: Link up - autoneg " - "completed sucessfully.\n"); + "completed successfully.\n"); } else { mac->serdes_has_link = false; e_dbg("SERDES: Link down - invalid" diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 997124d2992a..e2ce8f8a21a7 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -674,7 +674,7 @@ static void igb_set_interrupt_capability(struct igb_adapter *adapter) /* start with one vector for every rx queue */ numvecs = adapter->num_rx_queues; - /* if tx handler is seperate add 1 for every tx queue */ + /* if tx handler is separate add 1 for every tx queue */ if (!(adapter->flags & IGB_FLAG_QUEUE_PAIRS)) numvecs += adapter->num_tx_queues; diff --git a/drivers/net/irda/sa1100_ir.c b/drivers/net/irda/sa1100_ir.c index c412e8026173..1dcdce0631aa 100644 --- a/drivers/net/irda/sa1100_ir.c +++ b/drivers/net/irda/sa1100_ir.c @@ -331,7 +331,7 @@ static int sa1100_irda_resume(struct platform_device *pdev) * If we missed a speed change, initialise at the new speed * directly. It is debatable whether this is actually * required, but in the interests of continuing from where - * we left off it is desireable. The converse argument is + * we left off it is desirable. The converse argument is * that we should re-negotiate at 9600 baud again. */ if (si->newspeed) { diff --git a/drivers/net/qlge/qlge_ethtool.c b/drivers/net/qlge/qlge_ethtool.c index 058fa0a48c6f..b8d21ab212c6 100644 --- a/drivers/net/qlge/qlge_ethtool.c +++ b/drivers/net/qlge/qlge_ethtool.c @@ -402,7 +402,7 @@ static int ql_set_wol(struct net_device *ndev, struct ethtool_wolinfo *wol) u32 wol = 0; status = ql_mb_wol_mode(qdev, wol); QPRINTK(qdev, DRV, ERR, "WOL %s (wol code 0x%x) on %s\n", - (status == 0) ? "cleared sucessfully" : "clear failed", + (status == 0) ? "cleared successfully" : "clear failed", wol, qdev->ndev->name); } diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c index 894a7c84faef..a35845b48ea4 100644 --- a/drivers/net/qlge/qlge_main.c +++ b/drivers/net/qlge/qlge_main.c @@ -3517,7 +3517,7 @@ int ql_wol(struct ql_adapter *qdev) wol |= MB_WOL_MODE_ON; status = ql_mb_wol_mode(qdev, wol); QPRINTK(qdev, DRV, ERR, "WOL %s (wol code 0x%x) on %s\n", - (status == 0) ? "Sucessfully set" : "Failed", wol, + (status == 0) ? "Successfully set" : "Failed", wol, qdev->ndev->name); } diff --git a/drivers/net/sfc/regs.h b/drivers/net/sfc/regs.h index 89d606fe9248..18a3be428348 100644 --- a/drivers/net/sfc/regs.h +++ b/drivers/net/sfc/regs.h @@ -95,7 +95,7 @@ #define FRF_AA_INT_ACK_KER_FIELD_LBN 0 #define FRF_AA_INT_ACK_KER_FIELD_WIDTH 32 -/* INT_ISR0_REG: Function 0 Interrupt Acknowlege Status register */ +/* INT_ISR0_REG: Function 0 Interrupt Acknowledge Status register */ #define FR_BZ_INT_ISR0 0x00000090 #define FRF_BZ_INT_ISR_REG_LBN 0 #define FRF_BZ_INT_ISR_REG_WIDTH 64 diff --git a/drivers/net/smsc9420.c b/drivers/net/smsc9420.c index 12f0f5d74e3c..2ae1972bcb46 100644 --- a/drivers/net/smsc9420.c +++ b/drivers/net/smsc9420.c @@ -1348,7 +1348,7 @@ static int smsc9420_open(struct net_device *dev) netif_carrier_off(dev); - /* disable, mask and acknowlege all interrupts */ + /* disable, mask and acknowledge all interrupts */ spin_lock_irqsave(&pd->int_lock, flags); int_cfg = smsc9420_reg_read(pd, INT_CFG) & (~INT_CFG_IRQ_EN_); smsc9420_reg_write(pd, INT_CFG, int_cfg); diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c index 218524857bfc..839b1f065d3c 100644 --- a/drivers/net/spider_net.c +++ b/drivers/net/spider_net.c @@ -474,7 +474,7 @@ spider_net_prepare_rx_descr(struct spider_net_card *card, * spider_net_enable_rxchtails - sets RX dmac chain tail addresses * @card: card structure * - * spider_net_enable_rxchtails sets the RX DMAC chain tail adresses in the + * spider_net_enable_rxchtails sets the RX DMAC chain tail addresses in the * chip by writing to the appropriate register. DMA is enabled in * spider_net_enable_rxdmac. */ @@ -1820,7 +1820,7 @@ spider_net_enable_card(struct spider_net_card *card) spider_net_write_reg(card, SPIDER_NET_ECMODE, SPIDER_NET_ECMODE_VALUE); - /* set chain tail adress for RX chains and + /* set chain tail address for RX chains and * enable DMA */ spider_net_enable_rxchtails(card); spider_net_enable_rxdmac(card); diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c index b571a1babab9..a88fcb39ba15 100644 --- a/drivers/net/sungem.c +++ b/drivers/net/sungem.c @@ -782,7 +782,7 @@ static int gem_rx(struct gem *gp, int work_to_do) break; /* When writing back RX descriptor, GEM writes status - * then buffer address, possibly in seperate transactions. + * then buffer address, possibly in separate transactions. * If we don't wait for the chip to write both, we could * post a new buffer to this descriptor then have GEM spam * on the buffer address. We sync on the RX completion diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c index 80b404f2b938..ed4e9c42935c 100644 --- a/drivers/net/tehuti.c +++ b/drivers/net/tehuti.c @@ -1857,7 +1857,7 @@ static void bdx_tx_push_desc(struct bdx_priv *priv, void *data, int size) * @data - desc's data * @size - desc's size * - * NOTE: this func does check for available space and, if neccessary, waits for + * NOTE: this func does check for available space and, if necessary, waits for * NIC to read existing data before writing new one. */ static void bdx_tx_push_desc_safe(struct bdx_priv *priv, void *data, int size) diff --git a/drivers/net/tokenring/tms380tr.c b/drivers/net/tokenring/tms380tr.c index e3c42f5ac4a9..4e4c402319c9 100644 --- a/drivers/net/tokenring/tms380tr.c +++ b/drivers/net/tokenring/tms380tr.c @@ -693,7 +693,7 @@ static netdev_tx_t tms380tr_hardware_send_packet(struct sk_buff *skb, * NOTE: This function should be used whenever the status of any TPL must be * modified by the driver, because the compiler may otherwise change the * order of instructions such that writing the TPL status may be executed at - * an undesireable time. When this function is used, the status is always + * an undesirable time. When this function is used, the status is always * written when the function is called. */ static void tms380tr_write_tpl_status(TPL *tpl, unsigned int Status) @@ -2266,7 +2266,7 @@ static void tms380tr_rcv_status_irq(struct net_device *dev) * This function should be used whenever the status of any RPL must be * modified by the driver, because the compiler may otherwise change the * order of instructions such that writing the RPL status may be executed - * at an undesireable time. When this function is used, the status is + * at an undesirable time. When this function is used, the status is * always written when the function is called. */ static void tms380tr_write_rpl_status(RPL *rpl, unsigned int Status) diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 2834a01bae24..e572ecc09a44 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -1365,7 +1365,7 @@ static int tun_chr_close(struct inode *inode, struct file *file) __tun_detach(tun); - /* If desireable, unregister the netdevice. */ + /* If desirable, unregister the netdevice. */ if (!(tun->flags & TUN_PERSIST)) { rtnl_lock(); if (dev->reg_state == NETREG_REGISTERED) diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c index eb8fe7e16c6c..8eec97799e05 100644 --- a/drivers/net/ucc_geth.c +++ b/drivers/net/ucc_geth.c @@ -429,7 +429,7 @@ static void hw_add_addr_in_hash(struct ucc_geth_private *ugeth, ucc_fast_get_qe_cr_subblock(ugeth->ug_info->uf_info.ucc_num); /* Ethernet frames are defined in Little Endian mode, - therefor to insert */ + therefore to insert */ /* the address to the hash (Big Endian mode), we reverse the bytes.*/ set_mac_addr(&p_82xx_addr_filt->taddr.h, p_enet_addr); diff --git a/drivers/net/wimax/i2400m/fw.c b/drivers/net/wimax/i2400m/fw.c index 64cdfeb299ca..6c459f5cb5df 100644 --- a/drivers/net/wimax/i2400m/fw.c +++ b/drivers/net/wimax/i2400m/fw.c @@ -612,7 +612,7 @@ ssize_t i2400m_bm_cmd(struct i2400m *i2400m, goto error_wait_for_ack; } rx_bytes = result; - /* verify the ack and read more if neccessary [result is the + /* verify the ack and read more if necessary [result is the * final amount of bytes we get in the ack] */ result = __i2400m_bm_ack_verify(i2400m, opcode, ack, ack_size, flags); if (result < 0) diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h index 04df9bbe340f..820b128705ec 100644 --- a/drivers/net/wimax/i2400m/i2400m.h +++ b/drivers/net/wimax/i2400m/i2400m.h @@ -627,7 +627,7 @@ enum i2400m_bm_cmd_flags { * @I2400M_BRI_NO_REBOOT: Do not reboot the device and proceed * directly to wait for a reboot barker from the device. * @I2400M_BRI_MAC_REINIT: We need to reinitialize the boot - * rom after reading the MAC adress. This is quite a dirty hack, + * rom after reading the MAC address. This is quite a dirty hack, * if you ask me -- the device requires the bootrom to be * intialized after reading the MAC address. */ diff --git a/drivers/net/wimax/i2400m/sdio.c b/drivers/net/wimax/i2400m/sdio.c index 76a50ac02ebb..14f876b1358b 100644 --- a/drivers/net/wimax/i2400m/sdio.c +++ b/drivers/net/wimax/i2400m/sdio.c @@ -304,7 +304,7 @@ error_kzalloc: * * The device will be fully reset internally, but won't be * disconnected from the bus (so no reenumeration will - * happen). Firmware upload will be neccessary. + * happen). Firmware upload will be necessary. * * The device will send a reboot barker that will trigger the driver * to reinitialize the state via __i2400m_dev_reset_handle. @@ -314,7 +314,7 @@ error_kzalloc: * * The device will be fully reset internally, disconnected from the * bus an a reenumeration will happen. Firmware upload will be - * neccessary. Thus, we don't do any locking or struct + * necessary. Thus, we don't do any locking or struct * reinitialization, as we are going to be fully disconnected and * reenumerated. * diff --git a/drivers/net/wimax/i2400m/usb.c b/drivers/net/wimax/i2400m/usb.c index 98f4f8c5fb68..99f04c475898 100644 --- a/drivers/net/wimax/i2400m/usb.c +++ b/drivers/net/wimax/i2400m/usb.c @@ -246,7 +246,7 @@ error_kzalloc: * * The device will be fully reset internally, but won't be * disconnected from the USB bus (so no reenumeration will - * happen). Firmware upload will be neccessary. + * happen). Firmware upload will be necessary. * * The device will send a reboot barker in the notification endpoint * that will trigger the driver to reinitialize the state @@ -257,7 +257,7 @@ error_kzalloc: * * The device will be fully reset internally, disconnected from the * USB bus an a reenumeration will happen. Firmware upload will be - * neccessary. Thus, we don't do any locking or struct + * necessary. Thus, we don't do any locking or struct * reinitialization, as we are going to be fully disconnected and * reenumerated. * diff --git a/drivers/net/wireless/ath/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c index f9d6db8d013e..46a1e19c6787 100644 --- a/drivers/net/wireless/ath/ar9170/main.c +++ b/drivers/net/wireless/ath/ar9170/main.c @@ -2535,7 +2535,7 @@ void *ar9170_alloc(size_t priv_size) /* * this buffer is used for rx stream reconstruction. * Under heavy load this device (or the transport layer?) - * tends to split the streams into seperate rx descriptors. + * tends to split the streams into separate rx descriptors. */ skb = __dev_alloc_skb(AR9170_MAX_RX_BUFFER_SIZE, GFP_KERNEL); diff --git a/drivers/net/wireless/iwmc3200wifi/lmac.h b/drivers/net/wireless/iwmc3200wifi/lmac.h index a3a79b5e2898..a855a99e49b8 100644 --- a/drivers/net/wireless/iwmc3200wifi/lmac.h +++ b/drivers/net/wireless/iwmc3200wifi/lmac.h @@ -262,7 +262,7 @@ struct iwm_ct_kill_cfg_cmd { /* Power Management */ #define POWER_TABLE_CMD 0x77 -#define SAVE_RESTORE_ADRESS_CMD 0x78 +#define SAVE_RESTORE_ADDRESS_CMD 0x78 #define REPLY_WATERMARK_CMD 0x79 #define PM_DEBUG_STATISTIC_NOTIFIC 0x7B #define PD_FLUSH_N_NOTIFICATION 0x7C diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index 83f2592c59de..486c93559c29 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -368,7 +368,7 @@ static int rt2500usb_config_key(struct rt2x00_dev *rt2x00dev, /* * The encryption key doesn't fit within the CSR cache, - * this means we should allocate it seperately and use + * this means we should allocate it separately and use * rt2x00usb_vendor_request() to send the key to the hardware. */ reg = KEY_ENTRY(key->hw_key_idx); @@ -382,7 +382,7 @@ static int rt2500usb_config_key(struct rt2x00_dev *rt2x00dev, /* * The driver does not support the IV/EIV generation * in hardware. However it demands the data to be provided - * both seperately as well as inside the frame. + * both separately as well as inside the frame. * We already provided the CONFIG_CRYPTO_COPY_IV to rt2x00lib * to ensure rt2x00lib will not strip the data from the * frame after the copy, now we must tell mac80211 diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index ab95346cf6a3..2e5c8a13758b 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -100,7 +100,7 @@ static int rt2800usb_check_firmware(struct rt2x00_dev *rt2x00dev, * There are 2 variations of the rt2870 firmware. * a) size: 4kb * b) size: 8kb - * Note that (b) contains 2 seperate firmware blobs of 4k + * Note that (b) contains 2 separate firmware blobs of 4k * within the file. The first blob is the same firmware as (a), * but the second blob is for the additional chipsets. */ @@ -118,7 +118,7 @@ static int rt2800usb_check_firmware(struct rt2x00_dev *rt2x00dev, /* * 8kb firmware files must be checked as if it were - * 2 seperate firmware files. + * 2 separate firmware files. */ while (offset < len) { if (!rt2800usb_check_crc(data + offset, 4096)) diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.c b/drivers/net/wireless/rt2x00/rt2x00debug.c index 7d323a763b54..afee806affc2 100644 --- a/drivers/net/wireless/rt2x00/rt2x00debug.c +++ b/drivers/net/wireless/rt2x00/rt2x00debug.c @@ -109,7 +109,7 @@ struct rt2x00debug_intf { /* * HW crypto statistics. - * All statistics are stored seperately per cipher type. + * All statistics are stored separately per cipher type. */ struct rt2x00debug_crypto crypto_stats[CIPHER_MAX]; diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index 265e66dba552..5e1d5167fff4 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -397,7 +397,7 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev, /* * Hardware might have stripped the IV/EIV/ICV data, * in that case it is possible that the data was - * provided seperately (through hardware descriptor) + * provided separately (through hardware descriptor) * in which case we should reinsert the data into the frame. */ if ((rxdesc.dev_flags & RXDONE_CRYPTO_IV) && diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index 9915a09141ef..38ffca9b0fe7 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -502,7 +502,7 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb, /* * When hardware encryption is supported, and this frame * is to be encrypted, we should strip the IV/EIV data from - * the frame so we can provide it to the driver seperately. + * the frame so we can provide it to the driver separately. */ if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc.flags) && !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc.flags)) { diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index 0ca589306d71..99459db61efd 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -476,7 +476,7 @@ static int rt61pci_config_pairwise_key(struct rt2x00_dev *rt2x00dev, * The driver does not support the IV/EIV generation * in hardware. However it doesn't support the IV/EIV * inside the ieee80211 frame either, but requires it - * to be provided seperately for the descriptor. + * to be provided separately for the descriptor. * rt2x00lib will cut the IV/EIV data out of all frames * given to us by mac80211, but we must tell mac80211 * to generate the IV/EIV data. diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index ced3b6ab5e16..527368a45fd5 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -339,7 +339,7 @@ static int rt73usb_config_shared_key(struct rt2x00_dev *rt2x00dev, * The driver does not support the IV/EIV generation * in hardware. However it doesn't support the IV/EIV * inside the ieee80211 frame either, but requires it - * to be provided seperately for the descriptor. + * to be provided separately for the descriptor. * rt2x00lib will cut the IV/EIV data out of all frames * given to us by mac80211, but we must tell mac80211 * to generate the IV/EIV data. @@ -439,7 +439,7 @@ static int rt73usb_config_pairwise_key(struct rt2x00_dev *rt2x00dev, * The driver does not support the IV/EIV generation * in hardware. However it doesn't support the IV/EIV * inside the ieee80211 frame either, but requires it - * to be provided seperately for the descriptor. + * to be provided separately for the descriptor. * rt2x00lib will cut the IV/EIV data out of all frames * given to us by mac80211, but we must tell mac80211 * to generate the IV/EIV data. @@ -1665,7 +1665,7 @@ static void rt73usb_fill_rxdone(struct queue_entry *entry, /* * Hardware has stripped IV/EIV data from 802.11 frame during - * decryption. It has provided the data seperately but rt2x00lib + * decryption. It has provided the data separately but rt2x00lib * should decide if it should be reinserted. */ rxdesc->flags |= RX_FLAG_IV_STRIPPED; diff --git a/drivers/s390/char/raw3270.c b/drivers/s390/char/raw3270.c index 62ddf5202b79..2a4c566456e7 100644 --- a/drivers/s390/char/raw3270.c +++ b/drivers/s390/char/raw3270.c @@ -373,7 +373,7 @@ raw3270_irq (struct ccw_device *cdev, unsigned long intparm, struct irb *irb) rq->rc = ccw_device_start(rp->cdev, &rq->ccw, (unsigned long) rq, 0, 0); if (rq->rc == 0) - return; /* Sucessfully restarted. */ + return; /* Successfully restarted. */ break; case RAW3270_IO_STOP: if (!rq) diff --git a/drivers/s390/char/sclp.c b/drivers/s390/char/sclp.c index ec88c59842e3..f6d72e1f2a38 100644 --- a/drivers/s390/char/sclp.c +++ b/drivers/s390/char/sclp.c @@ -196,7 +196,7 @@ __sclp_start_request(struct sclp_req *req) req->start_count++; if (rc == 0) { - /* Sucessfully started request */ + /* Successfully started request */ req->status = SCLP_REQ_RUNNING; sclp_running_state = sclp_running_state_running; __sclp_set_request_timer(SCLP_RETRY_INTERVAL * HZ, diff --git a/drivers/scsi/a100u2w.c b/drivers/scsi/a100u2w.c index 208d6df9ed59..ff5716d5f044 100644 --- a/drivers/scsi/a100u2w.c +++ b/drivers/scsi/a100u2w.c @@ -492,7 +492,7 @@ static void init_alloc_map(struct orc_host * host) * init_orchid - initialise the host adapter * @host:host adapter to initialise * - * Initialise the controller and if neccessary load the firmware. + * Initialise the controller and if necessary load the firmware. * * Returns -1 if the initialisation fails. */ diff --git a/drivers/scsi/initio.c b/drivers/scsi/initio.c index 89a59484be02..a7714160fbc3 100644 --- a/drivers/scsi/initio.c +++ b/drivers/scsi/initio.c @@ -531,7 +531,7 @@ static void initio_read_eeprom(unsigned long base) * initio_stop_bm - stop bus master * @host: InitIO we are stopping * - * Stop any pending DMA operation, aborting the DMA if neccessary + * Stop any pending DMA operation, aborting the DMA if necessary */ static void initio_stop_bm(struct initio_host * host) diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c index 96ee599d9a05..96446a85e008 100644 --- a/drivers/scsi/libfc/fc_fcp.c +++ b/drivers/scsi/libfc/fc_fcp.c @@ -48,7 +48,7 @@ struct kmem_cache *scsi_pkt_cachep; #define FC_SRB_CMD_SENT (1 << 0) /* cmd has been sent */ #define FC_SRB_RCV_STATUS (1 << 1) /* response has arrived */ #define FC_SRB_ABORT_PENDING (1 << 2) /* cmd abort sent to device */ -#define FC_SRB_ABORTED (1 << 3) /* abort acknowleged */ +#define FC_SRB_ABORTED (1 << 3) /* abort acknowledged */ #define FC_SRB_DISCONTIG (1 << 4) /* non-sequential data recvd */ #define FC_SRB_COMPL (1 << 5) /* fc_io_compl has been run */ #define FC_SRB_FCP_PROCESSING_TMO (1 << 6) /* timer function processing */ diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index 2cc39684ce97..c898f47f30ba 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -969,7 +969,7 @@ lpfc_issue_els_flogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, * function returns, it does not guarantee all the IOCBs are actually aborted. * * Return code - * 0 - Sucessfully issued abort iocb on all outstanding flogis (Always 0) + * 0 - Successfully issued abort iocb on all outstanding flogis (Always 0) **/ int lpfc_els_abort_flogi(struct lpfc_hba *phba) @@ -3117,7 +3117,7 @@ lpfc_cmpl_els_rsp(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, if (ndlp && NLP_CHK_NODE_ACT(ndlp) && (*((uint32_t *) (pcmd)) == ELS_CMD_LS_RJT)) { /* A LS_RJT associated with Default RPI cleanup has its own - * seperate code path. + * separate code path. */ if (!(ndlp->nlp_flag & NLP_RM_DFLT_RPI)) ls_rjt = 1; diff --git a/drivers/scsi/pcmcia/nsp_cs.h b/drivers/scsi/pcmcia/nsp_cs.h index 7db28cd49446..8c61a4fe1db9 100644 --- a/drivers/scsi/pcmcia/nsp_cs.h +++ b/drivers/scsi/pcmcia/nsp_cs.h @@ -187,7 +187,7 @@ #define S_IO BIT(1) /* Input/Output line from SCSI bus */ #define S_CD BIT(2) /* Command/Data line from SCSI bus */ #define S_BUSY BIT(3) /* Busy line from SCSI bus */ -#define S_ACK BIT(4) /* Acknowlege line from SCSI bus */ +#define S_ACK BIT(4) /* Acknowledge line from SCSI bus */ #define S_REQUEST BIT(5) /* Request line from SCSI bus */ #define S_SELECT BIT(6) /* */ #define S_ATN BIT(7) /* */ diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c index 9b44c6f1b10e..7985ae45d688 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.c +++ b/drivers/scsi/pm8001/pm8001_hwi.c @@ -2924,7 +2924,7 @@ hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb) break; default: PM8001_MSG_DBG(pm8001_ha, - pm8001_printk("unkown device type(%x)\n", deviceType)); + pm8001_printk("unknown device type(%x)\n", deviceType)); break; } phy->phy_type |= PORT_TYPE_SAS; diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c index 7f9c83a76390..3b2c98fba834 100644 --- a/drivers/scsi/pm8001/pm8001_sas.c +++ b/drivers/scsi/pm8001/pm8001_sas.c @@ -600,7 +600,7 @@ static void pm8001_free_dev(struct pm8001_device *pm8001_dev) * by the command "OPC_INB_REG_DEV", after that the HBA will assign a * device ID(according to device's sas address) and returned it to LLDD. From * now on, we communicate with HBA FW with the device ID which HBA assigned - * rather than sas address. it is the neccessary step for our HBA but it is + * rather than sas address. it is the necessary step for our HBA but it is * the optional for other HBA driver. */ static int pm8001_dev_found_notify(struct domain_device *dev) diff --git a/drivers/scsi/pmcraid.h b/drivers/scsi/pmcraid.h index 92f89d50850c..b8ad07c3449e 100644 --- a/drivers/scsi/pmcraid.h +++ b/drivers/scsi/pmcraid.h @@ -938,7 +938,7 @@ static struct pmcraid_ioasc_error pmcraid_ioasc_error_table[] = { /* * pmcraid_ioctl_header - definition of header structure that preceeds all the - * buffers given as ioctl arguements. + * buffers given as ioctl arguments. * * .signature : always ASCII string, "PMCRAID" * .reserved : not used diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 255da53e5a01..5d94772d449d 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -2105,7 +2105,7 @@ static int sd_revalidate_disk(struct gendisk *disk) * which is followed by sdaaa. * * This is basically 26 base counting with one extra 'nil' entry - * at the beggining from the second digit on and can be + * at the beginning from the second digit on and can be * determined using similar method as 26 base conversion with the * index shifted -1 after each digit is computed. * diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c index c010733877ae..1fabede9e061 100644 --- a/drivers/spi/spi_s3c24xx.c +++ b/drivers/spi/spi_s3c24xx.c @@ -275,7 +275,7 @@ static inline u32 ack_bit(unsigned int irq) * Claim the FIQ handler (only one can be active at any one time) and * then setup the correct transfer code for this transfer. * - * This call updates all the necessary state information if sucessful, + * This call updates all the necessary state information if successful, * so the caller does not need to do anything more than start the transfer * as normal, since the IRQ will have been re-routed to the FIQ handler. */ diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h index 473a94ef905f..7c14d5c5a8ac 100644 --- a/drivers/usb/musb/musb_regs.h +++ b/drivers/usb/musb/musb_regs.h @@ -436,7 +436,7 @@ static inline void musb_write_txhubport(void __iomem *mbase, u8 epnum, #define MUSB_FLAT_OFFSET(_epnum, _offset) \ (USB_OFFSET(USB_EP_NI0_TXMAXP) + (0x40 * (_epnum)) + (_offset)) -/* Not implemented - HW has seperate Tx/Rx FIFO */ +/* Not implemented - HW has separate Tx/Rx FIFO */ #define MUSB_TXCSR_MODE 0x0000 static inline void musb_write_txfifosz(void __iomem *mbase, u8 c_size) diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index a591ebec0f89..52a81a312b86 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -154,7 +154,7 @@ struct cypress_private { int isthrottled; /* if throttled, discard reads */ wait_queue_head_t delta_msr_wait; /* used for TIOCMIWAIT */ char prev_status, diff_status; /* used for TIOCMIWAIT */ - /* we pass a pointer to this as the arguement sent to + /* we pass a pointer to this as the argument sent to cypress_set_termios old_termios */ struct ktermios tmp_termios; /* stores the old termios settings */ }; diff --git a/drivers/video/omap/lcdc.c b/drivers/video/omap/lcdc.c index a33483910dc8..9557f963662e 100644 --- a/drivers/video/omap/lcdc.c +++ b/drivers/video/omap/lcdc.c @@ -389,7 +389,7 @@ static int omap_lcdc_enable_plane(int plane, int enable) /* * Configure the LCD DMA for a palette load operation and do the palette * downloading synchronously. We don't use the frame+palette load mode of - * the controller, since the palette can always be downloaded seperately. + * the controller, since the palette can always be downloaded separately. */ static void load_palette(void) { diff --git a/drivers/video/s1d13xxxfb.c b/drivers/video/s1d13xxxfb.c index 0deb0a8867b7..7b63429f1a7c 100644 --- a/drivers/video/s1d13xxxfb.c +++ b/drivers/video/s1d13xxxfb.c @@ -517,12 +517,12 @@ s1d13xxxfb_bitblt_copyarea(struct fb_info *info, const struct fb_copyarea *area) src = (sy * stride) + (bpp * sx); } - /* set source adress */ + /* set source address */ s1d13xxxfb_writereg(info->par, S1DREG_BBLT_SRC_START0, (src & 0xff)); s1d13xxxfb_writereg(info->par, S1DREG_BBLT_SRC_START1, (src >> 8) & 0x00ff); s1d13xxxfb_writereg(info->par, S1DREG_BBLT_SRC_START2, (src >> 16) & 0x00ff); - /* set destination adress */ + /* set destination address */ s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START0, (dst & 0xff)); s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START1, (dst >> 8) & 0x00ff); s1d13xxxfb_writereg(info->par, S1DREG_BBLT_DST_START2, (dst >> 16) & 0x00ff); diff --git a/drivers/video/sm501fb.c b/drivers/video/sm501fb.c index 35370d0ecf03..b7dc1800efa9 100644 --- a/drivers/video/sm501fb.c +++ b/drivers/video/sm501fb.c @@ -411,7 +411,7 @@ static int sm501fb_set_par_common(struct fb_info *info, struct sm501fb_par *par = info->par; struct sm501fb_info *fbi = par->info; unsigned long pixclock; /* pixelclock in Hz */ - unsigned long sm501pixclock; /* pixelclock the 501 can achive in Hz */ + unsigned long sm501pixclock; /* pixelclock the 501 can achieve in Hz */ unsigned int mem_type; unsigned int clock_type; unsigned int head_addr; diff --git a/fs/affs/bitmap.c b/fs/affs/bitmap.c index dc5ef14bdc1c..8306d53307ed 100644 --- a/fs/affs/bitmap.c +++ b/fs/affs/bitmap.c @@ -128,7 +128,7 @@ err_range: /* * Allocate a block in the given allocation zone. * Since we have to byte-swap the bitmap on little-endian - * machines, this is rather expensive. Therefor we will + * machines, this is rather expensive. Therefore we will * preallocate up to 16 blocks from the same word, if * possible. We are not doing preallocations in the * header zone, though. diff --git a/fs/binfmt_elf_fdpic.c b/fs/binfmt_elf_fdpic.c index 18d77297ccc8..364fcfc0c5df 100644 --- a/fs/binfmt_elf_fdpic.c +++ b/fs/binfmt_elf_fdpic.c @@ -1393,7 +1393,7 @@ static inline void fill_note(struct memelfnote *note, const char *name, int type /* * fill up all the fields in prstatus from the given task struct, except - * registers which need to be filled up seperately. + * registers which need to be filled up separately. */ static void fill_prstatus(struct elf_prstatus *prstatus, struct task_struct *p, long signr) diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c index b44ce0a0711c..b1d61d0bdfc7 100644 --- a/fs/cifs/cifs_dfs_ref.c +++ b/fs/cifs/cifs_dfs_ref.c @@ -54,7 +54,7 @@ void cifs_dfs_release_automount_timer(void) * Extracts sharename form full UNC. * i.e. strips from UNC trailing path that is not part of share * name and fixup missing '\' in the begining of DFS node refferal - * if neccessary. + * if necessary. * Returns pointer to share name on success or ERR_PTR on error. * Caller is responsible for freeing returned string. */ diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index 941441d3e386..0e22440d2f0f 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -3886,7 +3886,7 @@ parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr, goto parse_DFS_referrals_exit; } - /* collect neccessary data from referrals */ + /* collect necessary data from referrals */ for (i = 0; i < *num_of_nodes; i++) { char *temp; int max_len; diff --git a/fs/ext4/move_extent.c b/fs/ext4/move_extent.c index 82c415be87a4..12a9ec73a888 100644 --- a/fs/ext4/move_extent.c +++ b/fs/ext4/move_extent.c @@ -928,7 +928,7 @@ out2: } /** - * mext_check_argumants - Check whether move extent can be done + * mext_check_arguments - Check whether move extent can be done * * @orig_inode: original inode * @donor_inode: donor inode diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c index 1a822ce2b24b..ec14d19ce501 100644 --- a/fs/fuse/inode.c +++ b/fs/fuse/inode.c @@ -850,7 +850,7 @@ static void fuse_send_init(struct fuse_conn *fc, struct fuse_req *req) req->in.args[0].size = sizeof(*arg); req->in.args[0].value = arg; req->out.numargs = 1; - /* Variable length arguement used for backward compatibility + /* Variable length argument used for backward compatibility with interface version < 7.5. Rest of init_out is zeroed by do_get_request(), so a short reply is not a problem */ req->out.argvar = 1; diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c index edfee24f3636..0556f7fededd 100644 --- a/fs/gfs2/ops_fstype.c +++ b/fs/gfs2/ops_fstype.c @@ -992,7 +992,7 @@ static const struct lm_lockops nolock_ops = { /** * gfs2_lm_mount - mount a locking protocol * @sdp: the filesystem - * @args: mount arguements + * @args: mount arguments * @silent: if 1, don't complain if the FS isn't a GFS2 fs * * Returns: errno diff --git a/fs/jbd/transaction.c b/fs/jbd/transaction.c index 006f9ad838a2..57ae203c8abf 100644 --- a/fs/jbd/transaction.c +++ b/fs/jbd/transaction.c @@ -1398,7 +1398,7 @@ int journal_stop(handle_t *handle) * the case where our storage is so fast that it is more optimal to go * ahead and force a flush and wait for the transaction to be committed * than it is to wait for an arbitrary amount of time for new writers to - * join the transaction. We acheive this by measuring how long it takes + * join the transaction. We achieve this by measuring how long it takes * to commit a transaction, and compare it with how long this * transaction has been running, and if run time < commit time then we * sleep for the delta and commit. This greatly helps super fast disks diff --git a/fs/nfsd/nfs4xdr.c b/fs/nfsd/nfs4xdr.c index a8587e90fd5a..143d43a93b72 100644 --- a/fs/nfsd/nfs4xdr.c +++ b/fs/nfsd/nfs4xdr.c @@ -1528,7 +1528,7 @@ static void write_cinfo(__be32 **p, struct nfsd4_change_info *c) } } while (0); /* Encode as an array of strings the string given with components - * seperated @sep. + * separated @sep. */ static __be32 nfsd4_encode_components(char sep, char *components, __be32 **pp, int *buflen) diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c index c5e4a49e3a12..ccb9c44f478d 100644 --- a/fs/ocfs2/dlmglue.c +++ b/fs/ocfs2/dlmglue.c @@ -1757,7 +1757,7 @@ out: * ocfs2_file_lock() and ocfs2_file_unlock() map to a single pair of * flock() calls. The locking approach this requires is sufficiently * different from all other cluster lock types that we implement a - * seperate path to the "low-level" dlm calls. In particular: + * separate path to the "low-level" dlm calls. In particular: * * - No optimization of lock levels is done - we take at exactly * what's been requested. diff --git a/fs/ocfs2/extent_map.c b/fs/ocfs2/extent_map.c index d35a27f4523e..83e9b1249aed 100644 --- a/fs/ocfs2/extent_map.c +++ b/fs/ocfs2/extent_map.c @@ -453,7 +453,7 @@ static int ocfs2_get_clusters_nocache(struct inode *inode, if (i == -1) { /* * Holes can be larger than the maximum size of an - * extent, so we return their lengths in a seperate + * extent, so we return their lengths in a separate * field. */ if (hole_len) { diff --git a/fs/reiserfs/bitmap.c b/fs/reiserfs/bitmap.c index 65c872761177..ecc04b5ede57 100644 --- a/fs/reiserfs/bitmap.c +++ b/fs/reiserfs/bitmap.c @@ -169,7 +169,7 @@ static int scan_bitmap_block(struct reiserfs_transaction_handle *th, return 0; // No free blocks in this bitmap } - /* search for a first zero bit -- beggining of a window */ + /* search for a first zero bit -- beginning of a window */ *beg = reiserfs_find_next_zero_le_bit ((unsigned long *)(bh->b_data), boundary, *beg); diff --git a/include/linux/hil.h b/include/linux/hil.h index 13352d7d0caf..523785a9de70 100644 --- a/include/linux/hil.h +++ b/include/linux/hil.h @@ -168,14 +168,14 @@ enum hil_command { HIL_CMD_PR6 = 0x45, /* Prompt6 */ HIL_CMD_PR7 = 0x46, /* Prompt7 */ HIL_CMD_PRM = 0x47, /* Prompt (General Purpose) */ - HIL_CMD_AK1 = 0x48, /* Acknowlege1 */ - HIL_CMD_AK2 = 0x49, /* Acknowlege2 */ - HIL_CMD_AK3 = 0x4a, /* Acknowlege3 */ - HIL_CMD_AK4 = 0x4b, /* Acknowlege4 */ - HIL_CMD_AK5 = 0x4c, /* Acknowlege5 */ - HIL_CMD_AK6 = 0x4d, /* Acknowlege6 */ - HIL_CMD_AK7 = 0x4e, /* Acknowlege7 */ - HIL_CMD_ACK = 0x4f, /* Acknowlege (General Purpose) */ + HIL_CMD_AK1 = 0x48, /* Acknowledge1 */ + HIL_CMD_AK2 = 0x49, /* Acknowledge2 */ + HIL_CMD_AK3 = 0x4a, /* Acknowledge3 */ + HIL_CMD_AK4 = 0x4b, /* Acknowledge4 */ + HIL_CMD_AK5 = 0x4c, /* Acknowledge5 */ + HIL_CMD_AK6 = 0x4d, /* Acknowledge6 */ + HIL_CMD_AK7 = 0x4e, /* Acknowledge7 */ + HIL_CMD_ACK = 0x4f, /* Acknowledge (General Purpose) */ /* 0x50 to 0x78 reserved for future use */ /* 0x80 to 0xEF device-specific commands */ diff --git a/include/linux/lru_cache.h b/include/linux/lru_cache.h index 3a2b2d9b0472..de48d167568b 100644 --- a/include/linux/lru_cache.h +++ b/include/linux/lru_cache.h @@ -64,7 +64,7 @@ For crash recovery after replication node failure, usually the condition is softened to regions that _may_ have been target of in-flight WRITE IO, e.g. by only lazily clearing the on-disk write-intent bitmap, trading frequency of meta data transactions against amount of - (possibly unneccessary) resync traffic. + (possibly unnecessary) resync traffic. If we set a hard limit on the area that may be "hot" at any given time, we limit the amount of resync traffic needed for crash recovery. diff --git a/include/linux/sched.h b/include/linux/sched.h index abdfacc58653..a70957b138ed 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1533,7 +1533,7 @@ struct task_struct { struct list_head *scm_work_list; #ifdef CONFIG_FUNCTION_GRAPH_TRACER - /* Index of current stored adress in ret_stack */ + /* Index of current stored address in ret_stack */ int curr_ret_stack; /* Stack of return addresses for return function tracing */ struct ftrace_ret_stack *ret_stack; diff --git a/include/media/davinci/vpfe_capture.h b/include/media/davinci/vpfe_capture.h index d863e5e8426d..4314a5f6a087 100644 --- a/include/media/davinci/vpfe_capture.h +++ b/include/media/davinci/vpfe_capture.h @@ -165,7 +165,7 @@ struct vpfe_device { u8 started; /* * offset where second field starts from the starting of the - * buffer for field seperated YCbCr formats + * buffer for field separated YCbCr formats */ u32 field_off; }; diff --git a/net/ipv4/tcp_timer.c b/net/ipv4/tcp_timer.c index 8816a20c2597..aff48d657181 100644 --- a/net/ipv4/tcp_timer.c +++ b/net/ipv4/tcp_timer.c @@ -133,7 +133,7 @@ static void tcp_mtu_probing(struct inet_connection_sock *icsk, struct sock *sk) } /* This function calculates a "timeout" which is equivalent to the timeout of a - * TCP connection after "boundary" unsucessful, exponentially backed-off + * TCP connection after "boundary" unsuccessful, exponentially backed-off * retransmissions with an initial RTO of TCP_RTO_MIN. */ static bool retransmits_timed_out(struct sock *sk, diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c index 0f7c6e6a4248..54e4c8bb23e7 100644 --- a/net/mac80211/mesh_plink.c +++ b/net/mac80211/mesh_plink.c @@ -743,7 +743,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m break; default: /* should not get here, PLINK_BLOCKED is dealt with at the - * beggining of the function + * beginning of the function */ spin_unlock_bh(&sta->lock); break; diff --git a/net/netfilter/nf_conntrack_sip.c b/net/netfilter/nf_conntrack_sip.c index 023966b569bf..fbe94adee7ac 100644 --- a/net/netfilter/nf_conntrack_sip.c +++ b/net/netfilter/nf_conntrack_sip.c @@ -276,7 +276,7 @@ EXPORT_SYMBOL_GPL(ct_sip_parse_request); * tabs, spaces and continuation lines, which are treated as a single whitespace * character. * - * Some headers may appear multiple times. A comma seperated list of values is + * Some headers may appear multiple times. A comma separated list of values is * equivalent to multiple headers. */ static const struct sip_header ct_sip_hdrs[] = { @@ -412,7 +412,7 @@ int ct_sip_get_header(const struct nf_conn *ct, const char *dptr, } EXPORT_SYMBOL_GPL(ct_sip_get_header); -/* Get next header field in a list of comma seperated values */ +/* Get next header field in a list of comma separated values */ static int ct_sip_next_header(const struct nf_conn *ct, const char *dptr, unsigned int dataoff, unsigned int datalen, enum sip_header_types type, diff --git a/net/netfilter/xt_hashlimit.c b/net/netfilter/xt_hashlimit.c index dd16e404424f..cbaac92dad59 100644 --- a/net/netfilter/xt_hashlimit.c +++ b/net/netfilter/xt_hashlimit.c @@ -1,6 +1,6 @@ /* * xt_hashlimit - Netfilter module to limit the number of packets per time - * seperately for each hashbucket (sourceip/sourceport/dstip/dstport) + * separately for each hashbucket (sourceip/sourceport/dstip/dstport) * * (C) 2003-2004 by Harald Welte * Copyright © CC Computer Consultants GmbH, 2007 - 2008 diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c index 4e4ca65cd320..500886bda9b4 100644 --- a/net/sctp/sm_sideeffect.c +++ b/net/sctp/sm_sideeffect.c @@ -475,7 +475,7 @@ static void sctp_do_8_2_transport_strike(struct sctp_association *asoc, * used to provide an upper bound to this doubling operation. * * Special Case: the first HB doesn't trigger exponential backoff. - * The first unacknowleged HB triggers it. We do this with a flag + * The first unacknowledged HB triggers it. We do this with a flag * that indicates that we have an outstanding HB. */ if (!is_hb || transport->hb_sent) { diff --git a/scripts/gfp-translate b/scripts/gfp-translate index 073cb6d152a0..d81b968d864e 100644 --- a/scripts/gfp-translate +++ b/scripts/gfp-translate @@ -19,7 +19,7 @@ usage() { exit 0 } -# Parse command-line arguements +# Parse command-line arguments while [ $# -gt 0 ]; do case $1 in --source) diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c index a1b10d1a384d..db0ed1cbd982 100644 --- a/sound/pci/rme9652/hdspm.c +++ b/sound/pci/rme9652/hdspm.c @@ -2479,7 +2479,7 @@ static int snd_hdspm_put_qs_wire(struct snd_kcontrol *kcontrol, on MADICARD - playback mixer matrix: [channelout+64] [output] [value] - input(thru) mixer matrix: [channelin] [output] [value] - (better do 2 kontrols for seperation ?) + (better do 2 kontrols for separation ?) */ #define HDSPM_MIXER(xname, xindex) \ diff --git a/sound/soc/codecs/wm8990.c b/sound/soc/codecs/wm8990.c index 341481e0e830..427614a2762b 100644 --- a/sound/soc/codecs/wm8990.c +++ b/sound/soc/codecs/wm8990.c @@ -990,7 +990,7 @@ static int wm8990_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id, reg = snd_soc_read(codec, WM8990_CLOCKING_2); snd_soc_write(codec, WM8990_CLOCKING_2, reg | WM8990_SYSCLK_SRC); - /* set up N , fractional mode and pre-divisor if neccessary */ + /* set up N , fractional mode and pre-divisor if necessary */ snd_soc_write(codec, WM8990_PLL1, pll_div.n | WM8990_SDM | (pll_div.div2?WM8990_PRESCALE:0)); snd_soc_write(codec, WM8990_PLL2, (u8)(pll_div.k>>8)); diff --git a/tools/perf/util/hist.c b/tools/perf/util/hist.c index e8daf5ca6fd2..44408c2621cf 100644 --- a/tools/perf/util/hist.c +++ b/tools/perf/util/hist.c @@ -321,7 +321,7 @@ static size_t __callchain__fprintf_graph(FILE *fp, struct callchain_node *self, new_depth_mask &= ~(1 << (depth - 1)); /* - * But we keep the older depth mask for the line seperator + * But we keep the older depth mask for the line separator * to keep the level link until we reach the last child */ ret += ipchain__fprintf_graph_line(fp, depth, depth_mask, -- cgit v1.2.3 From c4081ba5c9f6f7bdffe49e501a8604a2c0797ef9 Mon Sep 17 00:00:00 2001 From: Richard Kennedy Date: Mon, 22 Feb 2010 13:49:24 +0100 Subject: cfq: reorder cfq_queue removing padding on 64bit This removes 8 bytes of padding from struct cfq_queue on 64 bit builds, shrinking it's size to 256 bytes, so fitting into 1 fewer cachelines and allowing 1 more object/slab in it's kmem_cache. Signed-off-by: Richard Kennedy Reviewed-by: Jeff Moyer ---- patch against 2.6.33-rc8 tested on x86_64 AMDX2 Signed-off-by: Jens Axboe --- block/cfq-iosched.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'block') diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 023f4e69a337..e3dedfd3bcb4 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -115,11 +115,11 @@ struct cfq_queue { /* time when queue got scheduled in to dispatch first request. */ unsigned long dispatch_start; unsigned int allocated_slice; + unsigned int slice_dispatch; /* time when first request from queue completed and slice started. */ unsigned long slice_start; unsigned long slice_end; long slice_resid; - unsigned int slice_dispatch; /* pending metadata requests */ int meta_pending; @@ -130,13 +130,13 @@ struct cfq_queue { unsigned short ioprio, org_ioprio; unsigned short ioprio_class, org_ioprio_class; + pid_t pid; + unsigned int seek_samples; u64 seek_total; sector_t seek_mean; sector_t last_request_pos; - pid_t pid; - struct cfq_rb_root *service_tree; struct cfq_queue *new_cfqq; struct cfq_group *cfqg; -- cgit v1.2.3 From 79da0644a8e0838522828f106e4049639eea6baf Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 23 Feb 2010 08:40:43 +0100 Subject: Revert "block: improve queue_should_plug() by looking at IO depths" This reverts commit fb1e75389bd06fd5987e9cda1b4e0305c782f854. "Benjamin S." reports that the patch in question causes a big drop in sequential throughput for him, dropping from 200MB/sec down to only 70MB/sec. Needs to be investigated more fully, for now lets just revert the offending commit. Conflicts: include/linux/blkdev.h Signed-off-by: Jens Axboe --- block/blk-core.c | 11 ++--------- include/linux/blkdev.h | 4 +--- 2 files changed, 3 insertions(+), 12 deletions(-) (limited to 'block') diff --git a/block/blk-core.c b/block/blk-core.c index 718897e6d37f..d1a9a0a64f95 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -1147,7 +1147,7 @@ void init_request_from_bio(struct request *req, struct bio *bio) */ static inline bool queue_should_plug(struct request_queue *q) { - return !(blk_queue_nonrot(q) && blk_queue_queuing(q)); + return !(blk_queue_nonrot(q) && blk_queue_tagged(q)); } static int __make_request(struct request_queue *q, struct bio *bio) @@ -1859,15 +1859,8 @@ void blk_dequeue_request(struct request *rq) * and to it is freed is accounted as io that is in progress at * the driver side. */ - if (blk_account_rq(rq)) { + if (blk_account_rq(rq)) q->in_flight[rq_is_sync(rq)]++; - /* - * Mark this device as supporting hardware queuing, if - * we have more IOs in flight than 4. - */ - if (!blk_queue_queuing(q) && queue_in_flight(q) > 4) - set_bit(QUEUE_FLAG_CQ, &q->queue_flags); - } } /** diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 5c8018977efa..1896e868854f 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -461,8 +461,7 @@ struct request_queue #define QUEUE_FLAG_NONROT 14 /* non-rotational device (SSD) */ #define QUEUE_FLAG_VIRT QUEUE_FLAG_NONROT /* paravirt device */ #define QUEUE_FLAG_IO_STAT 15 /* do IO stats */ -#define QUEUE_FLAG_CQ 16 /* hardware does queuing */ -#define QUEUE_FLAG_DISCARD 17 /* supports DISCARD */ +#define QUEUE_FLAG_DISCARD 16 /* supports DISCARD */ #define QUEUE_FLAG_DEFAULT ((1 << QUEUE_FLAG_IO_STAT) | \ (1 << QUEUE_FLAG_CLUSTER) | \ @@ -586,7 +585,6 @@ enum { #define blk_queue_plugged(q) test_bit(QUEUE_FLAG_PLUGGED, &(q)->queue_flags) #define blk_queue_tagged(q) test_bit(QUEUE_FLAG_QUEUED, &(q)->queue_flags) -#define blk_queue_queuing(q) test_bit(QUEUE_FLAG_CQ, &(q)->queue_flags) #define blk_queue_stopped(q) test_bit(QUEUE_FLAG_STOPPED, &(q)->queue_flags) #define blk_queue_nomerges(q) test_bit(QUEUE_FLAG_NOMERGES, &(q)->queue_flags) #define blk_queue_nonrot(q) test_bit(QUEUE_FLAG_NONROT, &(q)->queue_flags) -- cgit v1.2.3 From bddd87c7e622ea681c665049027ed84cdcafcb09 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Tue, 23 Feb 2010 08:55:42 +0100 Subject: blk-core: use BIO list management functions Now that the bio list management stuff is generic, convert generic_make_request to use bio lists instead of its own private bio list implementation. Signed-off-by: Akinobu Mita Cc: Christoph Hellwig Signed-off-by: Jens Axboe --- block/blk-core.c | 31 ++++++++++++++----------------- include/linux/sched.h | 4 ++-- 2 files changed, 16 insertions(+), 19 deletions(-) (limited to 'block') diff --git a/block/blk-core.c b/block/blk-core.c index 718897e6d37f..44b6d691728d 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -1490,9 +1490,9 @@ end_io: /* * We only want one ->make_request_fn to be active at a time, * else stack usage with stacked devices could be a problem. - * So use current->bio_{list,tail} to keep a list of requests + * So use current->bio_list to keep a list of requests * submited by a make_request_fn function. - * current->bio_tail is also used as a flag to say if + * current->bio_list is also used as a flag to say if * generic_make_request is currently active in this task or not. * If it is NULL, then no make_request is active. If it is non-NULL, * then a make_request is active, and new requests should be added @@ -1500,11 +1500,11 @@ end_io: */ void generic_make_request(struct bio *bio) { - if (current->bio_tail) { + struct bio_list bio_list_on_stack; + + if (current->bio_list) { /* make_request is active */ - *(current->bio_tail) = bio; - bio->bi_next = NULL; - current->bio_tail = &bio->bi_next; + bio_list_add(current->bio_list, bio); return; } /* following loop may be a bit non-obvious, and so deserves some @@ -1512,30 +1512,27 @@ void generic_make_request(struct bio *bio) * Before entering the loop, bio->bi_next is NULL (as all callers * ensure that) so we have a list with a single bio. * We pretend that we have just taken it off a longer list, so - * we assign bio_list to the next (which is NULL) and bio_tail - * to &bio_list, thus initialising the bio_list of new bios to be + * we assign bio_list to a pointer to the bio_list_on_stack, + * thus initialising the bio_list of new bios to be * added. __generic_make_request may indeed add some more bios * through a recursive call to generic_make_request. If it * did, we find a non-NULL value in bio_list and re-enter the loop * from the top. In this case we really did just take the bio - * of the top of the list (no pretending) and so fixup bio_list and - * bio_tail or bi_next, and call into __generic_make_request again. + * of the top of the list (no pretending) and so remove it from + * bio_list, and call into __generic_make_request again. * * The loop was structured like this to make only one call to * __generic_make_request (which is important as it is large and * inlined) and to keep the structure simple. */ BUG_ON(bio->bi_next); + bio_list_init(&bio_list_on_stack); + current->bio_list = &bio_list_on_stack; do { - current->bio_list = bio->bi_next; - if (bio->bi_next == NULL) - current->bio_tail = ¤t->bio_list; - else - bio->bi_next = NULL; __generic_make_request(bio); - bio = current->bio_list; + bio = bio_list_pop(current->bio_list); } while (bio); - current->bio_tail = NULL; /* deactivate */ + current->bio_list = NULL; /* deactivate */ } EXPORT_SYMBOL(generic_make_request); diff --git a/include/linux/sched.h b/include/linux/sched.h index 78efe7c485ac..7eb82975e1ee 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -97,7 +97,7 @@ struct sched_param { struct exec_domain; struct futex_pi_state; struct robust_list_head; -struct bio; +struct bio_list; struct fs_struct; struct bts_context; struct perf_event_context; @@ -1466,7 +1466,7 @@ struct task_struct { void *journal_info; /* stacked block device info */ - struct bio *bio_list, **bio_tail; + struct bio_list *bio_list; /* VM state */ struct reclaim_state *reclaim_state; -- cgit v1.2.3 From 024f9066165ffe9c8284431c78adcbcddd309831 Mon Sep 17 00:00:00 2001 From: Gui Jianfeng Date: Fri, 26 Feb 2010 08:56:15 +0100 Subject: cfq: Remove useless css reference get There's no need to take css reference here, for the caller has already called rcu_read_lock() to prevent cgroup from being removed. Signed-off-by: Gui Jianfeng Reviewed-by: Li Zefan Acked-by: Vivek Goyal Signed-off-by: Jens Axboe --- block/blk-cgroup.c | 14 -------------- block/blk-cgroup.h | 3 --- block/cfq-iosched.c | 5 ----- 3 files changed, 22 deletions(-) (limited to 'block') diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c index e7dbbaf5fb3e..c85d74cae200 100644 --- a/block/blk-cgroup.c +++ b/block/blk-cgroup.c @@ -23,20 +23,6 @@ static LIST_HEAD(blkio_list); struct blkio_cgroup blkio_root_cgroup = { .weight = 2*BLKIO_WEIGHT_DEFAULT }; EXPORT_SYMBOL_GPL(blkio_root_cgroup); -bool blkiocg_css_tryget(struct blkio_cgroup *blkcg) -{ - if (!css_tryget(&blkcg->css)) - return false; - return true; -} -EXPORT_SYMBOL_GPL(blkiocg_css_tryget); - -void blkiocg_css_put(struct blkio_cgroup *blkcg) -{ - css_put(&blkcg->css); -} -EXPORT_SYMBOL_GPL(blkiocg_css_put); - struct blkio_cgroup *cgroup_to_blkio_cgroup(struct cgroup *cgroup) { return container_of(cgroup_subsys_state(cgroup, blkio_subsys_id), diff --git a/block/blk-cgroup.h b/block/blk-cgroup.h index 4d316df863b4..84bf745fa775 100644 --- a/block/blk-cgroup.h +++ b/block/blk-cgroup.h @@ -43,9 +43,6 @@ struct blkio_group { unsigned long sectors; }; -extern bool blkiocg_css_tryget(struct blkio_cgroup *blkcg); -extern void blkiocg_css_put(struct blkio_cgroup *blkcg); - typedef void (blkio_unlink_group_fn) (void *key, struct blkio_group *blkg); typedef void (blkio_update_group_weight_fn) (struct blkio_group *blkg, unsigned int weight); diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index e3dedfd3bcb4..10eb286f1f49 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -951,10 +951,6 @@ cfq_find_alloc_cfqg(struct cfq_data *cfqd, struct cgroup *cgroup, int create) struct backing_dev_info *bdi = &cfqd->queue->backing_dev_info; unsigned int major, minor; - /* Do we need to take this reference */ - if (!blkiocg_css_tryget(blkcg)) - return NULL;; - cfqg = cfqg_of_blkg(blkiocg_lookup_group(blkcg, key)); if (cfqg || !create) goto done; @@ -985,7 +981,6 @@ cfq_find_alloc_cfqg(struct cfq_data *cfqd, struct cgroup *cgroup, int create) hlist_add_head(&cfqg->cfqd_node, &cfqd->cfqg_list); done: - blkiocg_css_put(blkcg); return cfqg; } -- cgit v1.2.3 From 2800aac1114548a9b47b6e0d398117cc01b89685 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Fri, 26 Feb 2010 00:20:35 -0500 Subject: block: Update blk_queue_max_sectors and documentation Clarify blk_queue_max_sectors and update documentation. Signed-off-by: Martin K. Petersen Signed-off-by: Jens Axboe --- block/blk-settings.c | 30 +++++++++++++++++------------- 1 file changed, 17 insertions(+), 13 deletions(-) (limited to 'block') diff --git a/block/blk-settings.c b/block/blk-settings.c index 78549c723783..605df9b3de8f 100644 --- a/block/blk-settings.c +++ b/block/blk-settings.c @@ -212,26 +212,30 @@ EXPORT_SYMBOL(blk_queue_bounce_limit); /** * blk_queue_max_sectors - set max sectors for a request for this queue * @q: the request queue for the device - * @max_sectors: max sectors in the usual 512b unit + * @max_hw_sectors: max hardware sectors in the usual 512b unit * * Description: - * Enables a low level driver to set an upper limit on the size of - * received requests. + * Enables a low level driver to set a hard upper limit, + * max_hw_sectors, on the size of requests. max_hw_sectors is set by + * the device driver based upon the combined capabilities of I/O + * controller and storage device. + * + * max_sectors is a soft limit imposed by the block layer for + * filesystem type requests. This value can be overridden on a + * per-device basis in /sys/block//queue/max_sectors_kb. + * The soft limit can not exceed max_hw_sectors. **/ -void blk_queue_max_sectors(struct request_queue *q, unsigned int max_sectors) +void blk_queue_max_sectors(struct request_queue *q, unsigned int max_hw_sectors) { - if ((max_sectors << 9) < PAGE_CACHE_SIZE) { - max_sectors = 1 << (PAGE_CACHE_SHIFT - 9); + if ((max_hw_sectors << 9) < PAGE_CACHE_SIZE) { + max_hw_sectors = 1 << (PAGE_CACHE_SHIFT - 9); printk(KERN_INFO "%s: set to minimum %d\n", - __func__, max_sectors); + __func__, max_hw_sectors); } - if (BLK_DEF_MAX_SECTORS > max_sectors) - q->limits.max_hw_sectors = q->limits.max_sectors = max_sectors; - else { - q->limits.max_sectors = BLK_DEF_MAX_SECTORS; - q->limits.max_hw_sectors = max_sectors; - } + q->limits.max_hw_sectors = max_hw_sectors; + q->limits.max_sectors = min_t(unsigned int, max_hw_sectors, + BLK_DEF_MAX_SECTORS); } EXPORT_SYMBOL(blk_queue_max_sectors); -- cgit v1.2.3 From e751e76a5f7adeee7438e68b0965559ad2864d0d Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Fri, 26 Feb 2010 00:20:36 -0500 Subject: block: Remove unused accessor function blk_queue_max_hw_sectors is no longer called by any subsystem and can be removed. Signed-off-by: Martin K. Petersen Signed-off-by: Jens Axboe --- block/blk-settings.c | 9 --------- include/linux/blkdev.h | 1 - 2 files changed, 10 deletions(-) (limited to 'block') diff --git a/block/blk-settings.c b/block/blk-settings.c index 605df9b3de8f..4db46f2fcbe5 100644 --- a/block/blk-settings.c +++ b/block/blk-settings.c @@ -239,15 +239,6 @@ void blk_queue_max_sectors(struct request_queue *q, unsigned int max_hw_sectors) } EXPORT_SYMBOL(blk_queue_max_sectors); -void blk_queue_max_hw_sectors(struct request_queue *q, unsigned int max_sectors) -{ - if (BLK_DEF_MAX_SECTORS > max_sectors) - q->limits.max_hw_sectors = BLK_DEF_MAX_SECTORS; - else - q->limits.max_hw_sectors = max_sectors; -} -EXPORT_SYMBOL(blk_queue_max_hw_sectors); - /** * blk_queue_max_discard_sectors - set max sectors for a single discard * @q: the request queue for the device diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 2f17793048e7..c051cea2df07 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -922,7 +922,6 @@ extern void blk_cleanup_queue(struct request_queue *); extern void blk_queue_make_request(struct request_queue *, make_request_fn *); extern void blk_queue_bounce_limit(struct request_queue *, u64); extern void blk_queue_max_sectors(struct request_queue *, unsigned int); -extern void blk_queue_max_hw_sectors(struct request_queue *, unsigned int); extern void blk_queue_max_phys_segments(struct request_queue *, unsigned short); extern void blk_queue_max_hw_segments(struct request_queue *, unsigned short); extern void blk_queue_max_segment_size(struct request_queue *, unsigned int); -- cgit v1.2.3 From eb28d31bc97e6374d81f404da309401ffaed467b Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Fri, 26 Feb 2010 00:20:37 -0500 Subject: block: Add BLK_ prefix to definitions Add a BLK_ prefix to block layer constants. Signed-off-by: Martin K. Petersen Signed-off-by: Jens Axboe --- block/blk-settings.c | 4 ++-- drivers/block/ps3vram.c | 4 ++-- include/linux/blkdev.h | 10 +++++++--- 3 files changed, 11 insertions(+), 7 deletions(-) (limited to 'block') diff --git a/block/blk-settings.c b/block/blk-settings.c index 4db46f2fcbe5..3c53b0beb8dd 100644 --- a/block/blk-settings.c +++ b/block/blk-settings.c @@ -94,7 +94,7 @@ void blk_set_default_limits(struct queue_limits *lim) lim->max_phys_segments = MAX_PHYS_SEGMENTS; lim->max_hw_segments = MAX_HW_SEGMENTS; lim->seg_boundary_mask = BLK_SEG_BOUNDARY_MASK; - lim->max_segment_size = MAX_SEGMENT_SIZE; + lim->max_segment_size = BLK_MAX_SEGMENT_SIZE; lim->max_sectors = BLK_DEF_MAX_SECTORS; lim->max_hw_sectors = INT_MAX; lim->max_discard_sectors = 0; @@ -154,7 +154,7 @@ void blk_queue_make_request(struct request_queue *q, make_request_fn *mfn) q->unplug_timer.data = (unsigned long)q; blk_set_default_limits(&q->limits); - blk_queue_max_sectors(q, SAFE_MAX_SECTORS); + blk_queue_max_sectors(q, BLK_SAFE_MAX_SECTORS); /* * If the caller didn't supply a lock, fall back to our embedded diff --git a/drivers/block/ps3vram.c b/drivers/block/ps3vram.c index 1fb6c3135fc8..a7ecb43b16ab 100644 --- a/drivers/block/ps3vram.c +++ b/drivers/block/ps3vram.c @@ -753,8 +753,8 @@ static int __devinit ps3vram_probe(struct ps3_system_bus_device *dev) blk_queue_make_request(queue, ps3vram_make_request); blk_queue_max_phys_segments(queue, MAX_PHYS_SEGMENTS); blk_queue_max_hw_segments(queue, MAX_HW_SEGMENTS); - blk_queue_max_segment_size(queue, MAX_SEGMENT_SIZE); - blk_queue_max_sectors(queue, SAFE_MAX_SECTORS); + blk_queue_max_segment_size(queue, BLK_MAX_SEGMENT_SIZE); + blk_queue_max_sectors(queue, BLK_SAFE_MAX_SECTORS); gendisk = alloc_disk(1); if (!gendisk) { diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index c051cea2df07..5d378627f446 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -1016,11 +1016,15 @@ extern int blk_verify_command(unsigned char *cmd, fmode_t has_write_perm); #define MAX_PHYS_SEGMENTS 128 #define MAX_HW_SEGMENTS 128 #define SAFE_MAX_SECTORS 255 -#define BLK_DEF_MAX_SECTORS 1024 - #define MAX_SEGMENT_SIZE 65536 -#define BLK_SEG_BOUNDARY_MASK 0xFFFFFFFFUL +enum blk_default_limits { + BLK_MAX_SEGMENTS = 128, + BLK_SAFE_MAX_SECTORS = 255, + BLK_DEF_MAX_SECTORS = 1024, + BLK_MAX_SEGMENT_SIZE = 65536, + BLK_SEG_BOUNDARY_MASK = 0xFFFFFFFFUL, +}; #define blkdev_entry_to_request(entry) list_entry((entry), struct request, queuelist) -- cgit v1.2.3 From 086fa5ff0854c676ec333760f4c0154b3b242616 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Fri, 26 Feb 2010 00:20:38 -0500 Subject: block: Rename blk_queue_max_sectors to blk_queue_max_hw_sectors The block layer calling convention is blk_queue_. blk_queue_max_sectors predates this practice, leading to some confusion. Rename the function to appropriately reflect that its intended use is to set max_hw_sectors. Also introduce a temporary wrapper for backwards compability. This can be removed after the merge window is closed. Signed-off-by: Martin K. Petersen Signed-off-by: Jens Axboe --- arch/um/drivers/ubd_kern.c | 2 +- block/blk-settings.c | 8 ++++---- drivers/ata/libata-scsi.c | 2 +- drivers/block/DAC960.c | 2 +- drivers/block/brd.c | 2 +- drivers/block/cciss.c | 2 +- drivers/block/drbd/drbd_nl.c | 2 +- drivers/block/floppy.c | 2 +- drivers/block/hd.c | 2 +- drivers/block/mg_disk.c | 2 +- drivers/block/paride/pd.c | 2 +- drivers/block/pktcdvd.c | 4 ++-- drivers/block/ps3disk.c | 2 +- drivers/block/ps3vram.c | 2 +- drivers/block/sunvdc.c | 2 +- drivers/block/ub.c | 2 +- drivers/block/viodasd.c | 2 +- drivers/block/xd.c | 2 +- drivers/block/xen-blkfront.c | 2 +- drivers/cdrom/viocd.c | 2 +- drivers/firewire/sbp2.c | 2 +- drivers/ide/ide-disk.c | 2 +- drivers/ide/ide-floppy.c | 4 ++-- drivers/ide/ide-probe.c | 2 +- drivers/ieee1394/sbp2.c | 2 +- drivers/md/linear.c | 2 +- drivers/md/multipath.c | 4 ++-- drivers/md/raid0.c | 4 ++-- drivers/md/raid1.c | 4 ++-- drivers/md/raid10.c | 4 ++-- drivers/memstick/core/mspro_block.c | 2 +- drivers/message/i2o/i2o_block.c | 2 +- drivers/mmc/card/queue.c | 4 ++-- drivers/s390/block/dasd.c | 2 +- drivers/s390/char/tape_block.c | 2 +- drivers/scsi/ipr.c | 2 +- drivers/scsi/pmcraid.c | 2 +- drivers/scsi/scsi_lib.c | 2 +- drivers/scsi/scsi_scan.c | 2 +- drivers/usb/storage/scsiglue.c | 6 +++--- include/linux/blkdev.h | 9 ++++++++- 41 files changed, 60 insertions(+), 53 deletions(-) (limited to 'block') diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c index 5ff554677f40..c2051b0737cb 100644 --- a/arch/um/drivers/ubd_kern.c +++ b/arch/um/drivers/ubd_kern.c @@ -747,7 +747,7 @@ static int ubd_open_dev(struct ubd *ubd_dev) ubd_dev->fd = fd; if(ubd_dev->cow.file != NULL){ - blk_queue_max_sectors(ubd_dev->queue, 8 * sizeof(long)); + blk_queue_max_hw_sectors(ubd_dev->queue, 8 * sizeof(long)); err = -ENOMEM; ubd_dev->cow.bitmap = vmalloc(ubd_dev->cow.bitmap_len); diff --git a/block/blk-settings.c b/block/blk-settings.c index 3c53b0beb8dd..61afae9dbc6d 100644 --- a/block/blk-settings.c +++ b/block/blk-settings.c @@ -154,7 +154,7 @@ void blk_queue_make_request(struct request_queue *q, make_request_fn *mfn) q->unplug_timer.data = (unsigned long)q; blk_set_default_limits(&q->limits); - blk_queue_max_sectors(q, BLK_SAFE_MAX_SECTORS); + blk_queue_max_hw_sectors(q, BLK_SAFE_MAX_SECTORS); /* * If the caller didn't supply a lock, fall back to our embedded @@ -210,7 +210,7 @@ void blk_queue_bounce_limit(struct request_queue *q, u64 dma_mask) EXPORT_SYMBOL(blk_queue_bounce_limit); /** - * blk_queue_max_sectors - set max sectors for a request for this queue + * blk_queue_max_hw_sectors - set max sectors for a request for this queue * @q: the request queue for the device * @max_hw_sectors: max hardware sectors in the usual 512b unit * @@ -225,7 +225,7 @@ EXPORT_SYMBOL(blk_queue_bounce_limit); * per-device basis in /sys/block//queue/max_sectors_kb. * The soft limit can not exceed max_hw_sectors. **/ -void blk_queue_max_sectors(struct request_queue *q, unsigned int max_hw_sectors) +void blk_queue_max_hw_sectors(struct request_queue *q, unsigned int max_hw_sectors) { if ((max_hw_sectors << 9) < PAGE_CACHE_SIZE) { max_hw_sectors = 1 << (PAGE_CACHE_SHIFT - 9); @@ -237,7 +237,7 @@ void blk_queue_max_sectors(struct request_queue *q, unsigned int max_hw_sectors) q->limits.max_sectors = min_t(unsigned int, max_hw_sectors, BLK_DEF_MAX_SECTORS); } -EXPORT_SYMBOL(blk_queue_max_sectors); +EXPORT_SYMBOL(blk_queue_max_hw_sectors); /** * blk_queue_max_discard_sectors - set max sectors for a single discard diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index d096fbcbc771..bea003a24d27 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -1097,7 +1097,7 @@ static int ata_scsi_dev_config(struct scsi_device *sdev, dev->flags |= ATA_DFLAG_NO_UNLOAD; /* configure max sectors */ - blk_queue_max_sectors(sdev->request_queue, dev->max_sectors); + blk_queue_max_hw_sectors(sdev->request_queue, dev->max_sectors); if (dev->class == ATA_DEV_ATAPI) { struct request_queue *q = sdev->request_queue; diff --git a/drivers/block/DAC960.c b/drivers/block/DAC960.c index 7412b5d4f5f3..1c0cd35e1913 100644 --- a/drivers/block/DAC960.c +++ b/drivers/block/DAC960.c @@ -2535,7 +2535,7 @@ static bool DAC960_RegisterBlockDevice(DAC960_Controller_T *Controller) RequestQueue->queuedata = Controller; blk_queue_max_hw_segments(RequestQueue, Controller->DriverScatterGatherLimit); blk_queue_max_phys_segments(RequestQueue, Controller->DriverScatterGatherLimit); - blk_queue_max_sectors(RequestQueue, Controller->MaxBlocksPerCommand); + blk_queue_max_hw_sectors(RequestQueue, Controller->MaxBlocksPerCommand); disk->queue = RequestQueue; sprintf(disk->disk_name, "rd/c%dd%d", Controller->ControllerNumber, n); disk->major = MajorNumber; diff --git a/drivers/block/brd.c b/drivers/block/brd.c index 4f688434daf1..c6ddeacb77fd 100644 --- a/drivers/block/brd.c +++ b/drivers/block/brd.c @@ -434,7 +434,7 @@ static struct brd_device *brd_alloc(int i) goto out_free_dev; blk_queue_make_request(brd->brd_queue, brd_make_request); blk_queue_ordered(brd->brd_queue, QUEUE_ORDERED_TAG, NULL); - blk_queue_max_sectors(brd->brd_queue, 1024); + blk_queue_max_hw_sectors(brd->brd_queue, 1024); blk_queue_bounce_limit(brd->brd_queue, BLK_BOUNCE_ANY); disk = brd->brd_disk = alloc_disk(1 << part_shift); diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 86acdca5d0ce..030e52d72254 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -1802,7 +1802,7 @@ static int cciss_add_disk(ctlr_info_t *h, struct gendisk *disk, /* This is a limit in the driver and could be eliminated. */ blk_queue_max_phys_segments(disk->queue, h->maxsgentries); - blk_queue_max_sectors(disk->queue, h->cciss_max_sectors); + blk_queue_max_hw_sectors(disk->queue, h->cciss_max_sectors); blk_queue_softirq_done(disk->queue, cciss_softirq_done); diff --git a/drivers/block/drbd/drbd_nl.c b/drivers/block/drbd/drbd_nl.c index 1292e0620663..9b55e64196fc 100644 --- a/drivers/block/drbd/drbd_nl.c +++ b/drivers/block/drbd/drbd_nl.c @@ -709,7 +709,7 @@ void drbd_setup_queue_param(struct drbd_conf *mdev, unsigned int max_seg_s) __mu max_seg_s = min(queue_max_sectors(b) * queue_logical_block_size(b), max_seg_s); - blk_queue_max_sectors(q, max_seg_s >> 9); + blk_queue_max_hw_sectors(q, max_seg_s >> 9); blk_queue_max_phys_segments(q, max_segments ? max_segments : MAX_PHYS_SEGMENTS); blk_queue_max_hw_segments(q, max_segments ? max_segments : MAX_HW_SEGMENTS); blk_queue_max_segment_size(q, max_seg_s); diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 3266b4f65daa..b9b117059b62 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -4234,7 +4234,7 @@ static int __init floppy_init(void) err = -ENOMEM; goto out_unreg_driver; } - blk_queue_max_sectors(floppy_queue, 64); + blk_queue_max_hw_sectors(floppy_queue, 64); blk_register_region(MKDEV(FLOPPY_MAJOR, 0), 256, THIS_MODULE, floppy_find, NULL, NULL); diff --git a/drivers/block/hd.c b/drivers/block/hd.c index d5cdce08ffd2..5116c65c07cb 100644 --- a/drivers/block/hd.c +++ b/drivers/block/hd.c @@ -719,7 +719,7 @@ static int __init hd_init(void) return -ENOMEM; } - blk_queue_max_sectors(hd_queue, 255); + blk_queue_max_hw_sectors(hd_queue, 255); init_timer(&device_timer); device_timer.function = hd_times_out; blk_queue_logical_block_size(hd_queue, 512); diff --git a/drivers/block/mg_disk.c b/drivers/block/mg_disk.c index 02b2583df7fc..5416c9a606e4 100644 --- a/drivers/block/mg_disk.c +++ b/drivers/block/mg_disk.c @@ -980,7 +980,7 @@ static int mg_probe(struct platform_device *plat_dev) __func__, __LINE__); goto probe_err_6; } - blk_queue_max_sectors(host->breq, MG_MAX_SECTS); + blk_queue_max_hw_sectors(host->breq, MG_MAX_SECTS); blk_queue_logical_block_size(host->breq, MG_SECTOR_SIZE); init_timer(&host->timer); diff --git a/drivers/block/paride/pd.c b/drivers/block/paride/pd.c index 569e39e8f114..e712cd51af15 100644 --- a/drivers/block/paride/pd.c +++ b/drivers/block/paride/pd.c @@ -906,7 +906,7 @@ static int __init pd_init(void) if (!pd_queue) goto out1; - blk_queue_max_sectors(pd_queue, cluster); + blk_queue_max_hw_sectors(pd_queue, cluster); if (register_blkdev(major, name)) goto out2; diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c index 7cd2973ebb7b..6e1daa24da2f 100644 --- a/drivers/block/pktcdvd.c +++ b/drivers/block/pktcdvd.c @@ -2312,7 +2312,7 @@ static int pkt_open_dev(struct pktcdvd_device *pd, fmode_t write) * even if the size is a multiple of the packet size. */ spin_lock_irq(q->queue_lock); - blk_queue_max_sectors(q, pd->settings.size); + blk_queue_max_hw_sectors(q, pd->settings.size); spin_unlock_irq(q->queue_lock); set_bit(PACKET_WRITABLE, &pd->flags); } else { @@ -2613,7 +2613,7 @@ static void pkt_init_queue(struct pktcdvd_device *pd) blk_queue_make_request(q, pkt_make_request); blk_queue_logical_block_size(q, CD_FRAMESIZE); - blk_queue_max_sectors(q, PACKET_MAX_SECTORS); + blk_queue_max_hw_sectors(q, PACKET_MAX_SECTORS); blk_queue_merge_bvec(q, pkt_merge_bvec); q->queuedata = pd; } diff --git a/drivers/block/ps3disk.c b/drivers/block/ps3disk.c index 03a130dca8ab..9cd1a4a542b8 100644 --- a/drivers/block/ps3disk.c +++ b/drivers/block/ps3disk.c @@ -474,7 +474,7 @@ static int __devinit ps3disk_probe(struct ps3_system_bus_device *_dev) blk_queue_bounce_limit(queue, BLK_BOUNCE_HIGH); - blk_queue_max_sectors(queue, dev->bounce_size >> 9); + blk_queue_max_hw_sectors(queue, dev->bounce_size >> 9); blk_queue_segment_boundary(queue, -1UL); blk_queue_dma_alignment(queue, dev->blk_size-1); blk_queue_logical_block_size(queue, dev->blk_size); diff --git a/drivers/block/ps3vram.c b/drivers/block/ps3vram.c index a7ecb43b16ab..6416b262934b 100644 --- a/drivers/block/ps3vram.c +++ b/drivers/block/ps3vram.c @@ -754,7 +754,7 @@ static int __devinit ps3vram_probe(struct ps3_system_bus_device *dev) blk_queue_max_phys_segments(queue, MAX_PHYS_SEGMENTS); blk_queue_max_hw_segments(queue, MAX_HW_SEGMENTS); blk_queue_max_segment_size(queue, BLK_MAX_SEGMENT_SIZE); - blk_queue_max_sectors(queue, BLK_SAFE_MAX_SECTORS); + blk_queue_max_hw_sectors(queue, BLK_SAFE_MAX_SECTORS); gendisk = alloc_disk(1); if (!gendisk) { diff --git a/drivers/block/sunvdc.c b/drivers/block/sunvdc.c index 411f064760b4..dd30cddd0f7f 100644 --- a/drivers/block/sunvdc.c +++ b/drivers/block/sunvdc.c @@ -693,7 +693,7 @@ static int probe_disk(struct vdc_port *port) blk_queue_max_hw_segments(q, port->ring_cookies); blk_queue_max_phys_segments(q, port->ring_cookies); - blk_queue_max_sectors(q, port->max_xfer_size); + blk_queue_max_hw_sectors(q, port->max_xfer_size); g->major = vdc_major; g->first_minor = port->vio.vdev->dev_no << PARTITION_SHIFT; strcpy(g->disk_name, port->disk_name); diff --git a/drivers/block/ub.c b/drivers/block/ub.c index d86d1357ccef..352ea24d66e8 100644 --- a/drivers/block/ub.c +++ b/drivers/block/ub.c @@ -2323,7 +2323,7 @@ static int ub_probe_lun(struct ub_dev *sc, int lnum) blk_queue_max_hw_segments(q, UB_MAX_REQ_SG); blk_queue_max_phys_segments(q, UB_MAX_REQ_SG); blk_queue_segment_boundary(q, 0xffffffff); /* Dubious. */ - blk_queue_max_sectors(q, UB_MAX_SECTORS); + blk_queue_max_hw_sectors(q, UB_MAX_SECTORS); blk_queue_logical_block_size(q, lun->capacity.bsize); lun->disk = disk; diff --git a/drivers/block/viodasd.c b/drivers/block/viodasd.c index a8c8b56b275e..d44ece7d7b7c 100644 --- a/drivers/block/viodasd.c +++ b/drivers/block/viodasd.c @@ -473,7 +473,7 @@ retry: d->disk = g; blk_queue_max_hw_segments(q, VIOMAXBLOCKDMA); blk_queue_max_phys_segments(q, VIOMAXBLOCKDMA); - blk_queue_max_sectors(q, VIODASD_MAXSECTORS); + blk_queue_max_hw_sectors(q, VIODASD_MAXSECTORS); g->major = VIODASD_MAJOR; g->first_minor = dev_no << PARTITION_SHIFT; if (dev_no >= 26) diff --git a/drivers/block/xd.c b/drivers/block/xd.c index d1fd032e7514..1a325fb05c92 100644 --- a/drivers/block/xd.c +++ b/drivers/block/xd.c @@ -242,7 +242,7 @@ static int __init xd_init(void) } /* xd_maxsectors depends on controller - so set after detection */ - blk_queue_max_sectors(xd_queue, xd_maxsectors); + blk_queue_max_hw_sectors(xd_queue, xd_maxsectors); for (i = 0; i < xd_drives; i++) add_disk(xd_gendisk[i]); diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index a84702d1a35e..f9861aaa1fef 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -346,7 +346,7 @@ static int xlvbd_init_blk_queue(struct gendisk *gd, u16 sector_size) /* Hard sector size and max sectors impersonate the equiv. hardware. */ blk_queue_logical_block_size(rq, sector_size); - blk_queue_max_sectors(rq, 512); + blk_queue_max_hw_sectors(rq, 512); /* Each segment in a request is up to an aligned page in size. */ blk_queue_segment_boundary(rq, PAGE_SIZE - 1); diff --git a/drivers/cdrom/viocd.c b/drivers/cdrom/viocd.c index 57ca69e0ac55..b1dfd23eb832 100644 --- a/drivers/cdrom/viocd.c +++ b/drivers/cdrom/viocd.c @@ -618,7 +618,7 @@ static int viocd_probe(struct vio_dev *vdev, const struct vio_device_id *id) sizeof(gendisk->disk_name)); blk_queue_max_hw_segments(q, 1); blk_queue_max_phys_segments(q, 1); - blk_queue_max_sectors(q, 4096 / 512); + blk_queue_max_hw_sectors(q, 4096 / 512); gendisk->queue = q; gendisk->fops = &viocd_fops; gendisk->flags = GENHD_FL_CD|GENHD_FL_REMOVABLE; diff --git a/drivers/firewire/sbp2.c b/drivers/firewire/sbp2.c index d485cdd8cbac..70fef40cd22f 100644 --- a/drivers/firewire/sbp2.c +++ b/drivers/firewire/sbp2.c @@ -1571,7 +1571,7 @@ static int sbp2_scsi_slave_configure(struct scsi_device *sdev) sdev->start_stop_pwr_cond = 1; if (lu->tgt->workarounds & SBP2_WORKAROUND_128K_MAX_TRANS) - blk_queue_max_sectors(sdev->request_queue, 128 * 1024 / 512); + blk_queue_max_hw_sectors(sdev->request_queue, 128 * 1024 / 512); blk_queue_max_segment_size(sdev->request_queue, SBP2_MAX_SEG_SIZE); diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index 7f878017b736..3b128dce9c3a 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -679,7 +679,7 @@ static void ide_disk_setup(ide_drive_t *drive) if (max_s > hwif->rqsize) max_s = hwif->rqsize; - blk_queue_max_sectors(q, max_s); + blk_queue_max_hw_sectors(q, max_s); } printk(KERN_INFO "%s: max request size: %dKiB\n", drive->name, diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index fefbdfc8db06..efd907623469 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -486,7 +486,7 @@ static void ide_floppy_setup(ide_drive_t *drive) drive->atapi_flags |= IDE_AFLAG_ZIP_DRIVE; /* This value will be visible in the /proc/ide/hdx/settings */ drive->pc_delay = IDEFLOPPY_PC_DELAY; - blk_queue_max_sectors(drive->queue, 64); + blk_queue_max_hw_sectors(drive->queue, 64); } /* @@ -494,7 +494,7 @@ static void ide_floppy_setup(ide_drive_t *drive) * nasty clicking noises without it, so please don't remove this. */ if (strncmp((char *)&id[ATA_ID_PROD], "IOMEGA Clik!", 11) == 0) { - blk_queue_max_sectors(drive->queue, 64); + blk_queue_max_hw_sectors(drive->queue, 64); drive->atapi_flags |= IDE_AFLAG_CLIK_DRIVE; /* IOMEGA Clik! drives do not support lock/unlock commands */ drive->dev_flags &= ~IDE_DFLAG_DOORLOCKING; diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 4d76ba473097..1ec8b31277bd 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -774,7 +774,7 @@ static int ide_init_queue(ide_drive_t *drive) if (hwif->rqsize < max_sectors) max_sectors = hwif->rqsize; - blk_queue_max_sectors(q, max_sectors); + blk_queue_max_hw_sectors(q, max_sectors); #ifdef CONFIG_PCI /* When we have an IOMMU, we may have a problem where pci_map_sg() diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c index f199896c4113..c88696a6cf8a 100644 --- a/drivers/ieee1394/sbp2.c +++ b/drivers/ieee1394/sbp2.c @@ -2020,7 +2020,7 @@ static int sbp2scsi_slave_configure(struct scsi_device *sdev) if (lu->workarounds & SBP2_WORKAROUND_POWER_CONDITION) sdev->start_stop_pwr_cond = 1; if (lu->workarounds & SBP2_WORKAROUND_128K_MAX_TRANS) - blk_queue_max_sectors(sdev->request_queue, 128 * 1024 / 512); + blk_queue_max_hw_sectors(sdev->request_queue, 128 * 1024 / 512); blk_queue_max_segment_size(sdev->request_queue, SBP2_MAX_SEG_SIZE); return 0; diff --git a/drivers/md/linear.c b/drivers/md/linear.c index 00435bd20699..af2d39d603c7 100644 --- a/drivers/md/linear.c +++ b/drivers/md/linear.c @@ -177,7 +177,7 @@ static linear_conf_t *linear_conf(mddev_t *mddev, int raid_disks) */ if (rdev->bdev->bd_disk->queue->merge_bvec_fn && queue_max_sectors(mddev->queue) > (PAGE_SIZE>>9)) - blk_queue_max_sectors(mddev->queue, PAGE_SIZE>>9); + blk_queue_max_hw_sectors(mddev->queue, PAGE_SIZE>>9); conf->array_sectors += rdev->sectors; cnt++; diff --git a/drivers/md/multipath.c b/drivers/md/multipath.c index 32a662fc55c9..4b323f45ad74 100644 --- a/drivers/md/multipath.c +++ b/drivers/md/multipath.c @@ -308,7 +308,7 @@ static int multipath_add_disk(mddev_t *mddev, mdk_rdev_t *rdev) */ if (q->merge_bvec_fn && queue_max_sectors(q) > (PAGE_SIZE>>9)) - blk_queue_max_sectors(mddev->queue, PAGE_SIZE>>9); + blk_queue_max_hw_sectors(mddev->queue, PAGE_SIZE>>9); conf->working_disks++; mddev->degraded--; @@ -478,7 +478,7 @@ static int multipath_run (mddev_t *mddev) * a merge_bvec_fn to be involved in multipath */ if (rdev->bdev->bd_disk->queue->merge_bvec_fn && queue_max_sectors(mddev->queue) > (PAGE_SIZE>>9)) - blk_queue_max_sectors(mddev->queue, PAGE_SIZE>>9); + blk_queue_max_hw_sectors(mddev->queue, PAGE_SIZE>>9); if (!test_bit(Faulty, &rdev->flags)) conf->working_disks++; diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c index 77605cdceaf1..a1f7147b757f 100644 --- a/drivers/md/raid0.c +++ b/drivers/md/raid0.c @@ -182,7 +182,7 @@ static int create_strip_zones(mddev_t *mddev) if (rdev1->bdev->bd_disk->queue->merge_bvec_fn && queue_max_sectors(mddev->queue) > (PAGE_SIZE>>9)) - blk_queue_max_sectors(mddev->queue, PAGE_SIZE>>9); + blk_queue_max_hw_sectors(mddev->queue, PAGE_SIZE>>9); if (!smallest || (rdev1->sectors < smallest->sectors)) smallest = rdev1; @@ -325,7 +325,7 @@ static int raid0_run(mddev_t *mddev) } if (md_check_no_bitmap(mddev)) return -EINVAL; - blk_queue_max_sectors(mddev->queue, mddev->chunk_sectors); + blk_queue_max_hw_sectors(mddev->queue, mddev->chunk_sectors); mddev->queue->queue_lock = &mddev->queue->__queue_lock; ret = create_strip_zones(mddev); diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index 859bd3ffe435..5a06122abd3b 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -1158,7 +1158,7 @@ static int raid1_add_disk(mddev_t *mddev, mdk_rdev_t *rdev) */ if (rdev->bdev->bd_disk->queue->merge_bvec_fn && queue_max_sectors(mddev->queue) > (PAGE_SIZE>>9)) - blk_queue_max_sectors(mddev->queue, PAGE_SIZE>>9); + blk_queue_max_hw_sectors(mddev->queue, PAGE_SIZE>>9); p->head_position = 0; rdev->raid_disk = mirror; @@ -2103,7 +2103,7 @@ static int run(mddev_t *mddev) */ if (rdev->bdev->bd_disk->queue->merge_bvec_fn && queue_max_sectors(mddev->queue) > (PAGE_SIZE>>9)) - blk_queue_max_sectors(mddev->queue, PAGE_SIZE>>9); + blk_queue_max_hw_sectors(mddev->queue, PAGE_SIZE>>9); } mddev->degraded = 0; diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index d119b7b75e71..7584f9ab9bcf 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -1161,7 +1161,7 @@ static int raid10_add_disk(mddev_t *mddev, mdk_rdev_t *rdev) */ if (rdev->bdev->bd_disk->queue->merge_bvec_fn && queue_max_sectors(mddev->queue) > (PAGE_SIZE>>9)) - blk_queue_max_sectors(mddev->queue, PAGE_SIZE>>9); + blk_queue_max_hw_sectors(mddev->queue, PAGE_SIZE>>9); p->head_position = 0; rdev->raid_disk = mirror; @@ -2260,7 +2260,7 @@ static int run(mddev_t *mddev) */ if (rdev->bdev->bd_disk->queue->merge_bvec_fn && queue_max_sectors(mddev->queue) > (PAGE_SIZE>>9)) - blk_queue_max_sectors(mddev->queue, PAGE_SIZE>>9); + blk_queue_max_hw_sectors(mddev->queue, PAGE_SIZE>>9); disk->head_position = 0; } diff --git a/drivers/memstick/core/mspro_block.c b/drivers/memstick/core/mspro_block.c index bd83fa0a4970..44d4178c4c15 100644 --- a/drivers/memstick/core/mspro_block.c +++ b/drivers/memstick/core/mspro_block.c @@ -1226,7 +1226,7 @@ static int mspro_block_init_disk(struct memstick_dev *card) blk_queue_prep_rq(msb->queue, mspro_block_prepare_req); blk_queue_bounce_limit(msb->queue, limit); - blk_queue_max_sectors(msb->queue, MSPRO_BLOCK_MAX_PAGES); + blk_queue_max_hw_sectors(msb->queue, MSPRO_BLOCK_MAX_PAGES); blk_queue_max_phys_segments(msb->queue, MSPRO_BLOCK_MAX_SEGS); blk_queue_max_hw_segments(msb->queue, MSPRO_BLOCK_MAX_SEGS); blk_queue_max_segment_size(msb->queue, diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c index e39986a78273..d033cfdb516f 100644 --- a/drivers/message/i2o/i2o_block.c +++ b/drivers/message/i2o/i2o_block.c @@ -1066,7 +1066,7 @@ static int i2o_block_probe(struct device *dev) queue->queuedata = i2o_blk_dev; blk_queue_max_phys_segments(queue, I2O_MAX_PHYS_SEGMENTS); - blk_queue_max_sectors(queue, max_sectors); + blk_queue_max_hw_sectors(queue, max_sectors); blk_queue_max_hw_segments(queue, i2o_sg_tablesize(c, body_size)); osm_debug("max sectors = %d\n", queue->max_sectors); diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c index c5a7a855f4b1..09b633d5657b 100644 --- a/drivers/mmc/card/queue.c +++ b/drivers/mmc/card/queue.c @@ -154,7 +154,7 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock if (mq->bounce_buf) { blk_queue_bounce_limit(mq->queue, BLK_BOUNCE_ANY); - blk_queue_max_sectors(mq->queue, bouncesz / 512); + blk_queue_max_hw_sectors(mq->queue, bouncesz / 512); blk_queue_max_phys_segments(mq->queue, bouncesz / 512); blk_queue_max_hw_segments(mq->queue, bouncesz / 512); blk_queue_max_segment_size(mq->queue, bouncesz); @@ -180,7 +180,7 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock if (!mq->bounce_buf) { blk_queue_bounce_limit(mq->queue, limit); - blk_queue_max_sectors(mq->queue, + blk_queue_max_hw_sectors(mq->queue, min(host->max_blk_count, host->max_req_size / 512)); blk_queue_max_phys_segments(mq->queue, host->max_phys_segs); blk_queue_max_hw_segments(mq->queue, host->max_hw_segs); diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index 5905936c7c60..14b1e25b9dcf 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -2129,7 +2129,7 @@ static void dasd_setup_queue(struct dasd_block *block) blk_queue_logical_block_size(block->request_queue, block->bp_block); max = block->base->discipline->max_blocks << block->s2b_shift; - blk_queue_max_sectors(block->request_queue, max); + blk_queue_max_hw_sectors(block->request_queue, max); blk_queue_max_phys_segments(block->request_queue, -1L); blk_queue_max_hw_segments(block->request_queue, -1L); /* with page sized segments we can translate each segement into diff --git a/drivers/s390/char/tape_block.c b/drivers/s390/char/tape_block.c index 8d3d720737da..509ed056fddd 100644 --- a/drivers/s390/char/tape_block.c +++ b/drivers/s390/char/tape_block.c @@ -222,7 +222,7 @@ tapeblock_setup_device(struct tape_device * device) goto cleanup_queue; blk_queue_logical_block_size(blkdat->request_queue, TAPEBLOCK_HSEC_SIZE); - blk_queue_max_sectors(blkdat->request_queue, TAPEBLOCK_MAX_SEC); + blk_queue_max_hw_sectors(blkdat->request_queue, TAPEBLOCK_MAX_SEC); blk_queue_max_phys_segments(blkdat->request_queue, -1L); blk_queue_max_hw_segments(blkdat->request_queue, -1L); blk_queue_max_segment_size(blkdat->request_queue, -1L); diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index 9e52d16c7c39..032f0d0e6cb4 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -3674,7 +3674,7 @@ static int ipr_slave_configure(struct scsi_device *sdev) if (ipr_is_vset_device(res)) { blk_queue_rq_timeout(sdev->request_queue, IPR_VSET_RW_TIMEOUT); - blk_queue_max_sectors(sdev->request_queue, IPR_VSET_MAX_SECTORS); + blk_queue_max_hw_sectors(sdev->request_queue, IPR_VSET_MAX_SECTORS); } if (ipr_is_vset_device(res) || ipr_is_scsi_disk(res)) sdev->allow_restart = 1; diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c index b6f1ef954af1..9b1c1433c26b 100644 --- a/drivers/scsi/pmcraid.c +++ b/drivers/scsi/pmcraid.c @@ -235,7 +235,7 @@ static int pmcraid_slave_configure(struct scsi_device *scsi_dev) scsi_dev->allow_restart = 1; blk_queue_rq_timeout(scsi_dev->request_queue, PMCRAID_VSET_IO_TIMEOUT); - blk_queue_max_sectors(scsi_dev->request_queue, + blk_queue_max_hw_sectors(scsi_dev->request_queue, PMCRAID_VSET_MAX_SECTORS); } diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index c6642423cc67..ac3cca74bdfb 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -1627,7 +1627,7 @@ struct request_queue *__scsi_alloc_queue(struct Scsi_Host *shost, blk_queue_max_hw_segments(q, shost->sg_tablesize); blk_queue_max_phys_segments(q, SCSI_MAX_SG_CHAIN_SEGMENTS); - blk_queue_max_sectors(q, shost->max_sectors); + blk_queue_max_hw_sectors(q, shost->max_sectors); blk_queue_bounce_limit(q, scsi_calculate_bounce_limit(shost)); blk_queue_segment_boundary(q, shost->dma_boundary); dma_set_seg_boundary(dev, shost->dma_boundary); diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 012f73a96880..5d9b5130d8c8 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -879,7 +879,7 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result, * broken RA4x00 Compaq Disk Array */ if (*bflags & BLIST_MAX_512) - blk_queue_max_sectors(sdev->request_queue, 512); + blk_queue_max_hw_sectors(sdev->request_queue, 512); /* * Some devices may not want to have a start command automatically diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index e5e6df39e737..aadc16b5eed7 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -134,14 +134,14 @@ static int slave_configure(struct scsi_device *sdev) if (us->fflags & US_FL_MAX_SECTORS_MIN) max_sectors = PAGE_CACHE_SIZE >> 9; if (queue_max_sectors(sdev->request_queue) > max_sectors) - blk_queue_max_sectors(sdev->request_queue, + blk_queue_max_hw_sectors(sdev->request_queue, max_sectors); } else if (sdev->type == TYPE_TAPE) { /* Tapes need much higher max_sector limits, so just * raise it to the maximum possible (4 GB / 512) and * let the queue segment size sort out the real limit. */ - blk_queue_max_sectors(sdev->request_queue, 0x7FFFFF); + blk_queue_max_hw_sectors(sdev->request_queue, 0x7FFFFF); } /* Some USB host controllers can't do DMA; they have to use PIO. @@ -495,7 +495,7 @@ static ssize_t store_max_sectors(struct device *dev, struct device_attribute *at unsigned short ms; if (sscanf(buf, "%hu", &ms) > 0 && ms <= SCSI_DEFAULT_MAX_SECTORS) { - blk_queue_max_sectors(sdev->request_queue, ms); + blk_queue_max_hw_sectors(sdev->request_queue, ms); return strlen(buf); } return -EINVAL; diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 5d378627f446..57bc48446e92 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -921,7 +921,14 @@ extern struct request_queue *blk_init_queue(request_fn_proc *, spinlock_t *); extern void blk_cleanup_queue(struct request_queue *); extern void blk_queue_make_request(struct request_queue *, make_request_fn *); extern void blk_queue_bounce_limit(struct request_queue *, u64); -extern void blk_queue_max_sectors(struct request_queue *, unsigned int); +extern void blk_queue_max_hw_sectors(struct request_queue *, unsigned int); + +/* Temporary compatibility wrapper */ +static inline void blk_queue_max_sectors(struct request_queue *q, unsigned int max) +{ + blk_queue_max_hw_sectors(q, max); +} + extern void blk_queue_max_phys_segments(struct request_queue *, unsigned short); extern void blk_queue_max_hw_segments(struct request_queue *, unsigned short); extern void blk_queue_max_segment_size(struct request_queue *, unsigned int); -- cgit v1.2.3 From 8a78362c4eefc1deddbefe2c7f38aabbc2429d6b Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Fri, 26 Feb 2010 00:20:39 -0500 Subject: block: Consolidate phys_segment and hw_segment limits Except for SCSI no device drivers distinguish between physical and hardware segment limits. Consolidate the two into a single segment limit. Signed-off-by: Martin K. Petersen Signed-off-by: Jens Axboe --- arch/um/drivers/ubd_kern.c | 2 +- block/blk-core.c | 3 +- block/blk-merge.c | 8 ++--- block/blk-settings.c | 60 ++++++++----------------------------- drivers/ata/sata_nv.c | 2 +- drivers/block/DAC960.c | 2 +- drivers/block/cciss.c | 5 +--- drivers/block/cpqarray.c | 5 +--- drivers/block/drbd/drbd_nl.c | 3 +- drivers/block/paride/pf.c | 3 +- drivers/block/pktcdvd.c | 4 +-- drivers/block/ps3disk.c | 3 +- drivers/block/ps3vram.c | 3 +- drivers/block/sunvdc.c | 3 +- drivers/block/sx8.c | 3 +- drivers/block/ub.c | 3 +- drivers/block/viodasd.c | 3 +- drivers/block/xen-blkfront.c | 3 +- drivers/cdrom/gdrom.c | 2 +- drivers/cdrom/viocd.c | 3 +- drivers/ide/ide-probe.c | 3 +- drivers/md/raid5.c | 2 +- drivers/memstick/core/mspro_block.c | 3 +- drivers/message/i2o/i2o_block.c | 3 +- drivers/mmc/card/queue.c | 6 ++-- drivers/s390/block/dasd.c | 3 +- drivers/s390/char/tape_block.c | 3 +- drivers/scsi/ibmvscsi/ibmvfc.c | 4 +-- drivers/scsi/scsi_lib.c | 4 +-- drivers/scsi/sg.c | 6 ++-- drivers/scsi/st.c | 3 +- drivers/staging/hv/blkvsc_drv.c | 5 +--- fs/bio.c | 9 ++---- include/linux/blkdev.h | 27 ++++++++++------- include/linux/i2o.h | 2 +- 35 files changed, 70 insertions(+), 136 deletions(-) (limited to 'block') diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c index c2051b0737cb..c1ff6903b622 100644 --- a/arch/um/drivers/ubd_kern.c +++ b/arch/um/drivers/ubd_kern.c @@ -849,7 +849,7 @@ static int ubd_add(int n, char **error_out) } ubd_dev->queue->queuedata = ubd_dev; - blk_queue_max_hw_segments(ubd_dev->queue, MAX_SG); + blk_queue_max_segments(ubd_dev->queue, MAX_SG); err = ubd_disk_register(UBD_MAJOR, ubd_dev->size, n, &ubd_gendisk[n]); if(err){ *error_out = "Failed to register device"; diff --git a/block/blk-core.c b/block/blk-core.c index 36c0deebc2dc..9fe174dc74d1 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -1614,8 +1614,7 @@ int blk_rq_check_limits(struct request_queue *q, struct request *rq) * limitation. */ blk_recalc_rq_segments(rq); - if (rq->nr_phys_segments > queue_max_phys_segments(q) || - rq->nr_phys_segments > queue_max_hw_segments(q)) { + if (rq->nr_phys_segments > queue_max_segments(q)) { printk(KERN_ERR "%s: over max segments limit.\n", __func__); return -EIO; } diff --git a/block/blk-merge.c b/block/blk-merge.c index 99cb5cf1f447..5e7dc9973458 100644 --- a/block/blk-merge.c +++ b/block/blk-merge.c @@ -206,8 +206,7 @@ static inline int ll_new_hw_segment(struct request_queue *q, { int nr_phys_segs = bio_phys_segments(q, bio); - if (req->nr_phys_segments + nr_phys_segs > queue_max_hw_segments(q) || - req->nr_phys_segments + nr_phys_segs > queue_max_phys_segments(q)) { + if (req->nr_phys_segments + nr_phys_segs > queue_max_segments(q)) { req->cmd_flags |= REQ_NOMERGE; if (req == q->last_merge) q->last_merge = NULL; @@ -300,10 +299,7 @@ static int ll_merge_requests_fn(struct request_queue *q, struct request *req, total_phys_segments--; } - if (total_phys_segments > queue_max_phys_segments(q)) - return 0; - - if (total_phys_segments > queue_max_hw_segments(q)) + if (total_phys_segments > queue_max_segments(q)) return 0; /* Merge is OK... */ diff --git a/block/blk-settings.c b/block/blk-settings.c index 61afae9dbc6d..31e7a9375c13 100644 --- a/block/blk-settings.c +++ b/block/blk-settings.c @@ -91,8 +91,7 @@ EXPORT_SYMBOL_GPL(blk_queue_lld_busy); */ void blk_set_default_limits(struct queue_limits *lim) { - lim->max_phys_segments = MAX_PHYS_SEGMENTS; - lim->max_hw_segments = MAX_HW_SEGMENTS; + lim->max_segments = BLK_MAX_SEGMENTS; lim->seg_boundary_mask = BLK_SEG_BOUNDARY_MASK; lim->max_segment_size = BLK_MAX_SEGMENT_SIZE; lim->max_sectors = BLK_DEF_MAX_SECTORS; @@ -252,17 +251,15 @@ void blk_queue_max_discard_sectors(struct request_queue *q, EXPORT_SYMBOL(blk_queue_max_discard_sectors); /** - * blk_queue_max_phys_segments - set max phys segments for a request for this queue + * blk_queue_max_segments - set max hw segments for a request for this queue * @q: the request queue for the device * @max_segments: max number of segments * * Description: * Enables a low level driver to set an upper limit on the number of - * physical data segments in a request. This would be the largest sized - * scatter list the driver could handle. + * hw data segments in a request. **/ -void blk_queue_max_phys_segments(struct request_queue *q, - unsigned short max_segments) +void blk_queue_max_segments(struct request_queue *q, unsigned short max_segments) { if (!max_segments) { max_segments = 1; @@ -270,33 +267,9 @@ void blk_queue_max_phys_segments(struct request_queue *q, __func__, max_segments); } - q->limits.max_phys_segments = max_segments; + q->limits.max_segments = max_segments; } -EXPORT_SYMBOL(blk_queue_max_phys_segments); - -/** - * blk_queue_max_hw_segments - set max hw segments for a request for this queue - * @q: the request queue for the device - * @max_segments: max number of segments - * - * Description: - * Enables a low level driver to set an upper limit on the number of - * hw data segments in a request. This would be the largest number of - * address/length pairs the host adapter can actually give at once - * to the device. - **/ -void blk_queue_max_hw_segments(struct request_queue *q, - unsigned short max_segments) -{ - if (!max_segments) { - max_segments = 1; - printk(KERN_INFO "%s: set to minimum %d\n", - __func__, max_segments); - } - - q->limits.max_hw_segments = max_segments; -} -EXPORT_SYMBOL(blk_queue_max_hw_segments); +EXPORT_SYMBOL(blk_queue_max_segments); /** * blk_queue_max_segment_size - set max segment size for blk_rq_map_sg @@ -531,11 +504,7 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b, t->seg_boundary_mask = min_not_zero(t->seg_boundary_mask, b->seg_boundary_mask); - t->max_phys_segments = min_not_zero(t->max_phys_segments, - b->max_phys_segments); - - t->max_hw_segments = min_not_zero(t->max_hw_segments, - b->max_hw_segments); + t->max_segments = min_not_zero(t->max_segments, b->max_segments); t->max_segment_size = min_not_zero(t->max_segment_size, b->max_segment_size); @@ -739,22 +708,19 @@ EXPORT_SYMBOL(blk_queue_update_dma_pad); * does is adjust the queue so that the buf is always appended * silently to the scatterlist. * - * Note: This routine adjusts max_hw_segments to make room for - * appending the drain buffer. If you call - * blk_queue_max_hw_segments() or blk_queue_max_phys_segments() after - * calling this routine, you must set the limit to one fewer than your - * device can support otherwise there won't be room for the drain - * buffer. + * Note: This routine adjusts max_hw_segments to make room for appending + * the drain buffer. If you call blk_queue_max_segments() after calling + * this routine, you must set the limit to one fewer than your device + * can support otherwise there won't be room for the drain buffer. */ int blk_queue_dma_drain(struct request_queue *q, dma_drain_needed_fn *dma_drain_needed, void *buf, unsigned int size) { - if (queue_max_hw_segments(q) < 2 || queue_max_phys_segments(q) < 2) + if (queue_max_segments(q) < 2) return -EINVAL; /* make room for appending the drain */ - blk_queue_max_hw_segments(q, queue_max_hw_segments(q) - 1); - blk_queue_max_phys_segments(q, queue_max_phys_segments(q) - 1); + blk_queue_max_segments(q, queue_max_segments(q) - 1); q->dma_drain_needed = dma_drain_needed; q->dma_drain_buffer = buf; q->dma_drain_size = size; diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index 0c82d335c55d..684fe04dbbb7 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -772,7 +772,7 @@ static int nv_adma_slave_config(struct scsi_device *sdev) } blk_queue_segment_boundary(sdev->request_queue, segment_boundary); - blk_queue_max_hw_segments(sdev->request_queue, sg_tablesize); + blk_queue_max_segments(sdev->request_queue, sg_tablesize); ata_port_printk(ap, KERN_INFO, "DMA mask 0x%llX, segment boundary 0x%lX, hw segs %hu\n", (unsigned long long)*ap->host->dev->dma_mask, diff --git a/drivers/block/DAC960.c b/drivers/block/DAC960.c index 1c0cd35e1913..459f1bc25a7b 100644 --- a/drivers/block/DAC960.c +++ b/drivers/block/DAC960.c @@ -2534,7 +2534,7 @@ static bool DAC960_RegisterBlockDevice(DAC960_Controller_T *Controller) blk_queue_bounce_limit(RequestQueue, Controller->BounceBufferLimit); RequestQueue->queuedata = Controller; blk_queue_max_hw_segments(RequestQueue, Controller->DriverScatterGatherLimit); - blk_queue_max_phys_segments(RequestQueue, Controller->DriverScatterGatherLimit); + blk_queue_max_segments(RequestQueue, Controller->DriverScatterGatherLimit); blk_queue_max_hw_sectors(RequestQueue, Controller->MaxBlocksPerCommand); disk->queue = RequestQueue; sprintf(disk->disk_name, "rd/c%dd%d", Controller->ControllerNumber, n); diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 030e52d72254..a29e69418a03 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -1797,10 +1797,7 @@ static int cciss_add_disk(ctlr_info_t *h, struct gendisk *disk, blk_queue_bounce_limit(disk->queue, h->pdev->dma_mask); /* This is a hardware imposed limit. */ - blk_queue_max_hw_segments(disk->queue, h->maxsgentries); - - /* This is a limit in the driver and could be eliminated. */ - blk_queue_max_phys_segments(disk->queue, h->maxsgentries); + blk_queue_max_segments(disk->queue, h->maxsgentries); blk_queue_max_hw_sectors(disk->queue, h->cciss_max_sectors); diff --git a/drivers/block/cpqarray.c b/drivers/block/cpqarray.c index 6422651ec364..91d11631cec9 100644 --- a/drivers/block/cpqarray.c +++ b/drivers/block/cpqarray.c @@ -448,11 +448,8 @@ static int __init cpqarray_register_ctlr( int i, struct pci_dev *pdev) blk_queue_bounce_limit(q, hba[i]->pci_dev->dma_mask); /* This is a hardware imposed limit. */ - blk_queue_max_hw_segments(q, SG_MAX); + blk_queue_max_segments(q, SG_MAX); - /* This is a driver limit and could be eliminated. */ - blk_queue_max_phys_segments(q, SG_MAX); - init_timer(&hba[i]->timer); hba[i]->timer.expires = jiffies + IDA_TIMER; hba[i]->timer.data = (unsigned long)hba[i]; diff --git a/drivers/block/drbd/drbd_nl.c b/drivers/block/drbd/drbd_nl.c index 9b55e64196fc..4df3b40b1057 100644 --- a/drivers/block/drbd/drbd_nl.c +++ b/drivers/block/drbd/drbd_nl.c @@ -710,8 +710,7 @@ void drbd_setup_queue_param(struct drbd_conf *mdev, unsigned int max_seg_s) __mu max_seg_s = min(queue_max_sectors(b) * queue_logical_block_size(b), max_seg_s); blk_queue_max_hw_sectors(q, max_seg_s >> 9); - blk_queue_max_phys_segments(q, max_segments ? max_segments : MAX_PHYS_SEGMENTS); - blk_queue_max_hw_segments(q, max_segments ? max_segments : MAX_HW_SEGMENTS); + blk_queue_max_segments(q, max_segments ? max_segments : BLK_MAX_SEGMENTS); blk_queue_max_segment_size(q, max_seg_s); blk_queue_logical_block_size(q, 512); blk_queue_segment_boundary(q, PAGE_SIZE-1); diff --git a/drivers/block/paride/pf.c b/drivers/block/paride/pf.c index ea54ea393553..ddb4f9abd480 100644 --- a/drivers/block/paride/pf.c +++ b/drivers/block/paride/pf.c @@ -956,8 +956,7 @@ static int __init pf_init(void) return -ENOMEM; } - blk_queue_max_phys_segments(pf_queue, cluster); - blk_queue_max_hw_segments(pf_queue, cluster); + blk_queue_max_segments(pf_queue, cluster); for (pf = units, unit = 0; unit < PF_UNITS; pf++, unit++) { struct gendisk *disk = pf->disk; diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c index 6e1daa24da2f..b72935b8f203 100644 --- a/drivers/block/pktcdvd.c +++ b/drivers/block/pktcdvd.c @@ -950,14 +950,14 @@ static void pkt_iosched_process_queue(struct pktcdvd_device *pd) static int pkt_set_segment_merging(struct pktcdvd_device *pd, struct request_queue *q) { if ((pd->settings.size << 9) / CD_FRAMESIZE - <= queue_max_phys_segments(q)) { + <= queue_max_segments(q)) { /* * The cdrom device can handle one segment/frame */ clear_bit(PACKET_MERGE_SEGS, &pd->flags); return 0; } else if ((pd->settings.size << 9) / PAGE_SIZE - <= queue_max_phys_segments(q)) { + <= queue_max_segments(q)) { /* * We can handle this case at the expense of some extra memory * copies during write operations diff --git a/drivers/block/ps3disk.c b/drivers/block/ps3disk.c index 9cd1a4a542b8..bc95469d33c1 100644 --- a/drivers/block/ps3disk.c +++ b/drivers/block/ps3disk.c @@ -482,8 +482,7 @@ static int __devinit ps3disk_probe(struct ps3_system_bus_device *_dev) blk_queue_ordered(queue, QUEUE_ORDERED_DRAIN_FLUSH, ps3disk_prepare_flush); - blk_queue_max_phys_segments(queue, -1); - blk_queue_max_hw_segments(queue, -1); + blk_queue_max_segments(queue, -1); blk_queue_max_segment_size(queue, dev->bounce_size); gendisk = alloc_disk(PS3DISK_MINORS); diff --git a/drivers/block/ps3vram.c b/drivers/block/ps3vram.c index 6416b262934b..83ebb390b164 100644 --- a/drivers/block/ps3vram.c +++ b/drivers/block/ps3vram.c @@ -751,8 +751,7 @@ static int __devinit ps3vram_probe(struct ps3_system_bus_device *dev) priv->queue = queue; queue->queuedata = dev; blk_queue_make_request(queue, ps3vram_make_request); - blk_queue_max_phys_segments(queue, MAX_PHYS_SEGMENTS); - blk_queue_max_hw_segments(queue, MAX_HW_SEGMENTS); + blk_queue_max_segments(queue, BLK_MAX_HW_SEGMENTS); blk_queue_max_segment_size(queue, BLK_MAX_SEGMENT_SIZE); blk_queue_max_hw_sectors(queue, BLK_SAFE_MAX_SECTORS); diff --git a/drivers/block/sunvdc.c b/drivers/block/sunvdc.c index dd30cddd0f7f..48e8fee9f2d4 100644 --- a/drivers/block/sunvdc.c +++ b/drivers/block/sunvdc.c @@ -691,8 +691,7 @@ static int probe_disk(struct vdc_port *port) port->disk = g; - blk_queue_max_hw_segments(q, port->ring_cookies); - blk_queue_max_phys_segments(q, port->ring_cookies); + blk_queue_max_segments(q, port->ring_cookies); blk_queue_max_hw_sectors(q, port->max_xfer_size); g->major = vdc_major; g->first_minor = port->vio.vdev->dev_no << PARTITION_SHIFT; diff --git a/drivers/block/sx8.c b/drivers/block/sx8.c index 7bd7b2f83116..b70f0fca9a42 100644 --- a/drivers/block/sx8.c +++ b/drivers/block/sx8.c @@ -1518,8 +1518,7 @@ static int carm_init_disks(struct carm_host *host) break; } disk->queue = q; - blk_queue_max_hw_segments(q, CARM_MAX_REQ_SG); - blk_queue_max_phys_segments(q, CARM_MAX_REQ_SG); + blk_queue_max_segments(q, CARM_MAX_REQ_SG); blk_queue_segment_boundary(q, CARM_SG_BOUNDARY); q->queuedata = port; diff --git a/drivers/block/ub.c b/drivers/block/ub.c index 352ea24d66e8..2e889838e819 100644 --- a/drivers/block/ub.c +++ b/drivers/block/ub.c @@ -2320,8 +2320,7 @@ static int ub_probe_lun(struct ub_dev *sc, int lnum) disk->queue = q; blk_queue_bounce_limit(q, BLK_BOUNCE_HIGH); - blk_queue_max_hw_segments(q, UB_MAX_REQ_SG); - blk_queue_max_phys_segments(q, UB_MAX_REQ_SG); + blk_queue_max_segments(q, UB_MAX_REQ_SG); blk_queue_segment_boundary(q, 0xffffffff); /* Dubious. */ blk_queue_max_hw_sectors(q, UB_MAX_SECTORS); blk_queue_logical_block_size(q, lun->capacity.bsize); diff --git a/drivers/block/viodasd.c b/drivers/block/viodasd.c index d44ece7d7b7c..c12b31362ac6 100644 --- a/drivers/block/viodasd.c +++ b/drivers/block/viodasd.c @@ -471,8 +471,7 @@ retry: } d->disk = g; - blk_queue_max_hw_segments(q, VIOMAXBLOCKDMA); - blk_queue_max_phys_segments(q, VIOMAXBLOCKDMA); + blk_queue_max_segments(q, VIOMAXBLOCKDMA); blk_queue_max_hw_sectors(q, VIODASD_MAXSECTORS); g->major = VIODASD_MAJOR; g->first_minor = dev_no << PARTITION_SHIFT; diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index f9861aaa1fef..9c09694b2520 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -353,8 +353,7 @@ static int xlvbd_init_blk_queue(struct gendisk *gd, u16 sector_size) blk_queue_max_segment_size(rq, PAGE_SIZE); /* Ensure a merged request will fit in a single I/O ring slot. */ - blk_queue_max_phys_segments(rq, BLKIF_MAX_SEGMENTS_PER_REQUEST); - blk_queue_max_hw_segments(rq, BLKIF_MAX_SEGMENTS_PER_REQUEST); + blk_queue_max_segments(rq, BLKIF_MAX_SEGMENTS_PER_REQUEST); /* Make sure buffer addresses are sector-aligned. */ blk_queue_dma_alignment(rq, 511); diff --git a/drivers/cdrom/gdrom.c b/drivers/cdrom/gdrom.c index e789e6c9a422..03c71f7698cb 100644 --- a/drivers/cdrom/gdrom.c +++ b/drivers/cdrom/gdrom.c @@ -741,7 +741,7 @@ static int __devinit probe_gdrom_setupqueue(void) { blk_queue_logical_block_size(gd.gdrom_rq, GDROM_HARD_SECTOR); /* using DMA so memory will need to be contiguous */ - blk_queue_max_hw_segments(gd.gdrom_rq, 1); + blk_queue_max_segments(gd.gdrom_rq, 1); /* set a large max size to get most from DMA */ blk_queue_max_segment_size(gd.gdrom_rq, 0x40000); gd.disk->queue = gd.gdrom_rq; diff --git a/drivers/cdrom/viocd.c b/drivers/cdrom/viocd.c index b1dfd23eb832..cc435be0bc13 100644 --- a/drivers/cdrom/viocd.c +++ b/drivers/cdrom/viocd.c @@ -616,8 +616,7 @@ static int viocd_probe(struct vio_dev *vdev, const struct vio_device_id *id) gendisk->first_minor = deviceno; strncpy(gendisk->disk_name, c->name, sizeof(gendisk->disk_name)); - blk_queue_max_hw_segments(q, 1); - blk_queue_max_phys_segments(q, 1); + blk_queue_max_segments(q, 1); blk_queue_max_hw_sectors(q, 4096 / 512); gendisk->queue = q; gendisk->fops = &viocd_fops; diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 1ec8b31277bd..f8c1ae6ad74c 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -790,8 +790,7 @@ static int ide_init_queue(ide_drive_t *drive) max_sg_entries >>= 1; #endif /* CONFIG_PCI */ - blk_queue_max_hw_segments(q, max_sg_entries); - blk_queue_max_phys_segments(q, max_sg_entries); + blk_queue_max_segments(q, max_sg_entries); /* assign drive queue */ drive->queue = q; diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index ceb24afdc147..509c8f3dd9a5 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3739,7 +3739,7 @@ static int bio_fits_rdev(struct bio *bi) if ((bi->bi_size>>9) > queue_max_sectors(q)) return 0; blk_recount_segments(q, bi); - if (bi->bi_phys_segments > queue_max_phys_segments(q)) + if (bi->bi_phys_segments > queue_max_segments(q)) return 0; if (q->merge_bvec_fn) diff --git a/drivers/memstick/core/mspro_block.c b/drivers/memstick/core/mspro_block.c index 44d4178c4c15..972b87069d55 100644 --- a/drivers/memstick/core/mspro_block.c +++ b/drivers/memstick/core/mspro_block.c @@ -1227,8 +1227,7 @@ static int mspro_block_init_disk(struct memstick_dev *card) blk_queue_bounce_limit(msb->queue, limit); blk_queue_max_hw_sectors(msb->queue, MSPRO_BLOCK_MAX_PAGES); - blk_queue_max_phys_segments(msb->queue, MSPRO_BLOCK_MAX_SEGS); - blk_queue_max_hw_segments(msb->queue, MSPRO_BLOCK_MAX_SEGS); + blk_queue_max_segments(msb->queue, MSPRO_BLOCK_MAX_SEGS); blk_queue_max_segment_size(msb->queue, MSPRO_BLOCK_MAX_PAGES * msb->page_size); diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c index d033cfdb516f..2658b1484a2c 100644 --- a/drivers/message/i2o/i2o_block.c +++ b/drivers/message/i2o/i2o_block.c @@ -1065,9 +1065,8 @@ static int i2o_block_probe(struct device *dev) queue = gd->queue; queue->queuedata = i2o_blk_dev; - blk_queue_max_phys_segments(queue, I2O_MAX_PHYS_SEGMENTS); blk_queue_max_hw_sectors(queue, max_sectors); - blk_queue_max_hw_segments(queue, i2o_sg_tablesize(c, body_size)); + blk_queue_max_segments(queue, i2o_sg_tablesize(c, body_size)); osm_debug("max sectors = %d\n", queue->max_sectors); osm_debug("phys segments = %d\n", queue->max_phys_segments); diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c index 09b633d5657b..381fe032caa1 100644 --- a/drivers/mmc/card/queue.c +++ b/drivers/mmc/card/queue.c @@ -155,8 +155,7 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock if (mq->bounce_buf) { blk_queue_bounce_limit(mq->queue, BLK_BOUNCE_ANY); blk_queue_max_hw_sectors(mq->queue, bouncesz / 512); - blk_queue_max_phys_segments(mq->queue, bouncesz / 512); - blk_queue_max_hw_segments(mq->queue, bouncesz / 512); + blk_queue_max_segments(mq->queue, bouncesz / 512); blk_queue_max_segment_size(mq->queue, bouncesz); mq->sg = kmalloc(sizeof(struct scatterlist), @@ -182,8 +181,7 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock blk_queue_bounce_limit(mq->queue, limit); blk_queue_max_hw_sectors(mq->queue, min(host->max_blk_count, host->max_req_size / 512)); - blk_queue_max_phys_segments(mq->queue, host->max_phys_segs); - blk_queue_max_hw_segments(mq->queue, host->max_hw_segs); + blk_queue_max_segments(mq->queue, host->max_hw_segs); blk_queue_max_segment_size(mq->queue, host->max_seg_size); mq->sg = kmalloc(sizeof(struct scatterlist) * diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index 14b1e25b9dcf..8831e9308d05 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -2130,8 +2130,7 @@ static void dasd_setup_queue(struct dasd_block *block) blk_queue_logical_block_size(block->request_queue, block->bp_block); max = block->base->discipline->max_blocks << block->s2b_shift; blk_queue_max_hw_sectors(block->request_queue, max); - blk_queue_max_phys_segments(block->request_queue, -1L); - blk_queue_max_hw_segments(block->request_queue, -1L); + blk_queue_max_segments(block->request_queue, -1L); /* with page sized segments we can translate each segement into * one idaw/tidaw */ diff --git a/drivers/s390/char/tape_block.c b/drivers/s390/char/tape_block.c index 509ed056fddd..097da8ce6be6 100644 --- a/drivers/s390/char/tape_block.c +++ b/drivers/s390/char/tape_block.c @@ -223,8 +223,7 @@ tapeblock_setup_device(struct tape_device * device) blk_queue_logical_block_size(blkdat->request_queue, TAPEBLOCK_HSEC_SIZE); blk_queue_max_hw_sectors(blkdat->request_queue, TAPEBLOCK_MAX_SEC); - blk_queue_max_phys_segments(blkdat->request_queue, -1L); - blk_queue_max_hw_segments(blkdat->request_queue, -1L); + blk_queue_max_segments(blkdat->request_queue, -1L); blk_queue_max_segment_size(blkdat->request_queue, -1L); blk_queue_segment_boundary(blkdat->request_queue, -1L); diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c index 87b536a97cb4..732f6d35b4a8 100644 --- a/drivers/scsi/ibmvscsi/ibmvfc.c +++ b/drivers/scsi/ibmvscsi/ibmvfc.c @@ -4195,7 +4195,7 @@ static void ibmvfc_tgt_add_rport(struct ibmvfc_target *tgt) if (tgt->service_parms.class3_parms[0] & 0x80000000) rport->supported_classes |= FC_COS_CLASS3; if (rport->rqst_q) - blk_queue_max_hw_segments(rport->rqst_q, 1); + blk_queue_max_segments(rport->rqst_q, 1); } else tgt_dbg(tgt, "rport add failed\n"); spin_unlock_irqrestore(vhost->host->host_lock, flags); @@ -4669,7 +4669,7 @@ static int ibmvfc_probe(struct vio_dev *vdev, const struct vio_device_id *id) } if (shost_to_fc_host(shost)->rqst_q) - blk_queue_max_hw_segments(shost_to_fc_host(shost)->rqst_q, 1); + blk_queue_max_segments(shost_to_fc_host(shost)->rqst_q, 1); dev_set_drvdata(dev, vhost); spin_lock(&ibmvfc_driver_lock); list_add_tail(&vhost->queue, &ibmvfc_head); diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index ac3cca74bdfb..f8fbf47377ae 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -1624,8 +1624,8 @@ struct request_queue *__scsi_alloc_queue(struct Scsi_Host *shost, /* * this limit is imposed by hardware restrictions */ - blk_queue_max_hw_segments(q, shost->sg_tablesize); - blk_queue_max_phys_segments(q, SCSI_MAX_SG_CHAIN_SEGMENTS); + blk_queue_max_segments(q, min_t(unsigned short, shost->sg_tablesize, + SCSI_MAX_SG_CHAIN_SEGMENTS)); blk_queue_max_hw_sectors(q, shost->max_sectors); blk_queue_bounce_limit(q, scsi_calculate_bounce_limit(shost)); diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index 040f751809ea..c996d98636f3 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -287,8 +287,7 @@ sg_open(struct inode *inode, struct file *filp) if (list_empty(&sdp->sfds)) { /* no existing opens on this device */ sdp->sgdebug = 0; q = sdp->device->request_queue; - sdp->sg_tablesize = min(queue_max_hw_segments(q), - queue_max_phys_segments(q)); + sdp->sg_tablesize = queue_max_segments(q); } if ((sfp = sg_add_sfp(sdp, dev))) filp->private_data = sfp; @@ -1376,8 +1375,7 @@ static Sg_device *sg_alloc(struct gendisk *disk, struct scsi_device *scsidp) sdp->device = scsidp; INIT_LIST_HEAD(&sdp->sfds); init_waitqueue_head(&sdp->o_excl_wait); - sdp->sg_tablesize = min(queue_max_hw_segments(q), - queue_max_phys_segments(q)); + sdp->sg_tablesize = queue_max_segments(q); sdp->index = k; kref_init(&sdp->d_ref); diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index d04ea9a6f673..f67d1a159aad 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -3983,8 +3983,7 @@ static int st_probe(struct device *dev) return -ENODEV; } - i = min(queue_max_hw_segments(SDp->request_queue), - queue_max_phys_segments(SDp->request_queue)); + i = queue_max_segments(SDp->request_queue); if (st_max_sg_segs < i) i = st_max_sg_segs; buffer = new_tape_buffer((SDp->host)->unchecked_isa_dma, i); diff --git a/drivers/staging/hv/blkvsc_drv.c b/drivers/staging/hv/blkvsc_drv.c index 62b282844a53..45d908114d11 100644 --- a/drivers/staging/hv/blkvsc_drv.c +++ b/drivers/staging/hv/blkvsc_drv.c @@ -363,10 +363,7 @@ static int blkvsc_probe(struct device *device) blkdev->gd->queue = blk_init_queue(blkvsc_request, &blkdev->lock); blk_queue_max_segment_size(blkdev->gd->queue, PAGE_SIZE); - blk_queue_max_phys_segments(blkdev->gd->queue, - MAX_MULTIPAGE_BUFFER_COUNT); - blk_queue_max_hw_segments(blkdev->gd->queue, - MAX_MULTIPAGE_BUFFER_COUNT); + blk_queue_max_segments(blkdev->gd->queue, MAX_MULTIPAGE_BUFFER_COUNT); blk_queue_segment_boundary(blkdev->gd->queue, PAGE_SIZE-1); blk_queue_bounce_limit(blkdev->gd->queue, BLK_BOUNCE_ANY); blk_queue_dma_alignment(blkdev->gd->queue, 511); diff --git a/fs/bio.c b/fs/bio.c index 88094afc29ea..dc17afd672e3 100644 --- a/fs/bio.c +++ b/fs/bio.c @@ -507,10 +507,8 @@ int bio_get_nr_vecs(struct block_device *bdev) int nr_pages; nr_pages = ((queue_max_sectors(q) << 9) + PAGE_SIZE - 1) >> PAGE_SHIFT; - if (nr_pages > queue_max_phys_segments(q)) - nr_pages = queue_max_phys_segments(q); - if (nr_pages > queue_max_hw_segments(q)) - nr_pages = queue_max_hw_segments(q); + if (nr_pages > queue_max_segments(q)) + nr_pages = queue_max_segments(q); return nr_pages; } @@ -575,8 +573,7 @@ static int __bio_add_page(struct request_queue *q, struct bio *bio, struct page * make this too complex. */ - while (bio->bi_phys_segments >= queue_max_phys_segments(q) - || bio->bi_phys_segments >= queue_max_hw_segments(q)) { + while (bio->bi_phys_segments >= queue_max_segments(q)) { if (retried_segments) return 0; diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 57bc48446e92..ebd22dbed861 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -316,8 +316,7 @@ struct queue_limits { unsigned int discard_alignment; unsigned short logical_block_size; - unsigned short max_hw_segments; - unsigned short max_phys_segments; + unsigned short max_segments; unsigned char misaligned; unsigned char discard_misaligned; @@ -929,8 +928,19 @@ static inline void blk_queue_max_sectors(struct request_queue *q, unsigned int m blk_queue_max_hw_sectors(q, max); } -extern void blk_queue_max_phys_segments(struct request_queue *, unsigned short); -extern void blk_queue_max_hw_segments(struct request_queue *, unsigned short); +extern void blk_queue_max_segments(struct request_queue *, unsigned short); + +static inline void blk_queue_max_phys_segments(struct request_queue *q, unsigned short max) +{ + blk_queue_max_segments(q, max); +} + +static inline void blk_queue_max_hw_segments(struct request_queue *q, unsigned short max) +{ + blk_queue_max_segments(q, max); +} + + extern void blk_queue_max_segment_size(struct request_queue *, unsigned int); extern void blk_queue_max_discard_sectors(struct request_queue *q, unsigned int max_discard_sectors); @@ -1055,14 +1065,9 @@ static inline unsigned int queue_max_hw_sectors(struct request_queue *q) return q->limits.max_hw_sectors; } -static inline unsigned short queue_max_hw_segments(struct request_queue *q) -{ - return q->limits.max_hw_segments; -} - -static inline unsigned short queue_max_phys_segments(struct request_queue *q) +static inline unsigned short queue_max_segments(struct request_queue *q) { - return q->limits.max_phys_segments; + return q->limits.max_segments; } static inline unsigned int queue_max_segment_size(struct request_queue *q) diff --git a/include/linux/i2o.h b/include/linux/i2o.h index 4c4e57d1f19d..87018dc5527d 100644 --- a/include/linux/i2o.h +++ b/include/linux/i2o.h @@ -385,7 +385,7 @@ /* defines for max_sectors and max_phys_segments */ #define I2O_MAX_SECTORS 1024 #define I2O_MAX_SECTORS_LIMITED 128 -#define I2O_MAX_PHYS_SEGMENTS MAX_PHYS_SEGMENTS +#define I2O_MAX_PHYS_SEGMENTS BLK_MAX_SEGMENTS /* * Message structures -- cgit v1.2.3 From 3dde36ddea3e07dd025c4c1ba47edec91606fec0 Mon Sep 17 00:00:00 2001 From: Corrado Zoccolo Date: Sat, 27 Feb 2010 19:45:39 +0100 Subject: cfq-iosched: rework seeky detection Current seeky detection is based on average seek lenght. This is suboptimal, since the average will not distinguish between: * a process doing medium sized seeks * a process doing some sequential requests interleaved with larger seeks and even a medium seek can take lot of time, if the requested sector happens to be behind the disk head in the rotation (50% probability). Therefore, we change the seeky queue detection to work as follows: * each request can be classified as sequential if it is very close to the current head position, i.e. it is likely in the disk cache (disks usually read more data than requested, and put it in cache for subsequent reads). Otherwise, the request is classified as seeky. * an history window of the last 32 requests is kept, storing the classification result. * A queue is marked as seeky if more than 1/8 of the last 32 requests were seeky. This patch fixes a regression reported by Yanmin, on mmap 64k random reads. Reported-by: Yanmin Zhang Signed-off-by: Corrado Zoccolo Signed-off-by: Jens Axboe --- block/cfq-iosched.c | 54 ++++++++++++++--------------------------------------- 1 file changed, 14 insertions(+), 40 deletions(-) (limited to 'block') diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 10eb286f1f49..3fd8afc2174e 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -46,8 +46,8 @@ static const int cfq_hist_divisor = 4; #define CFQ_HW_QUEUE_MIN (5) #define CFQ_SERVICE_SHIFT 12 -#define CFQQ_SEEK_THR 8 * 1024 -#define CFQQ_SEEKY(cfqq) ((cfqq)->seek_mean > CFQQ_SEEK_THR) +#define CFQQ_SEEK_THR (sector_t)(8 * 100) +#define CFQQ_SEEKY(cfqq) (hweight32(cfqq->seek_history) > 32/8) #define RQ_CIC(rq) \ ((struct cfq_io_context *) (rq)->elevator_private) @@ -132,9 +132,7 @@ struct cfq_queue { pid_t pid; - unsigned int seek_samples; - u64 seek_total; - sector_t seek_mean; + u32 seek_history; sector_t last_request_pos; struct cfq_rb_root *service_tree; @@ -1668,16 +1666,7 @@ static inline sector_t cfq_dist_from_last(struct cfq_data *cfqd, static inline int cfq_rq_close(struct cfq_data *cfqd, struct cfq_queue *cfqq, struct request *rq, bool for_preempt) { - sector_t sdist = cfqq->seek_mean; - - if (!sample_valid(cfqq->seek_samples)) - sdist = CFQQ_SEEK_THR; - - /* if seek_mean is big, using it as close criteria is meaningless */ - if (sdist > CFQQ_SEEK_THR && !for_preempt) - sdist = CFQQ_SEEK_THR; - - return cfq_dist_from_last(cfqd, rq) <= sdist; + return cfq_dist_from_last(cfqd, rq) <= CFQQ_SEEK_THR; } static struct cfq_queue *cfqq_close(struct cfq_data *cfqd, @@ -2975,30 +2964,16 @@ static void cfq_update_io_seektime(struct cfq_data *cfqd, struct cfq_queue *cfqq, struct request *rq) { - sector_t sdist; - u64 total; - - if (!cfqq->last_request_pos) - sdist = 0; - else if (cfqq->last_request_pos < blk_rq_pos(rq)) - sdist = blk_rq_pos(rq) - cfqq->last_request_pos; - else - sdist = cfqq->last_request_pos - blk_rq_pos(rq); - - /* - * Don't allow the seek distance to get too large from the - * odd fragment, pagein, etc - */ - if (cfqq->seek_samples <= 60) /* second&third seek */ - sdist = min(sdist, (cfqq->seek_mean * 4) + 2*1024*1024); - else - sdist = min(sdist, (cfqq->seek_mean * 4) + 2*1024*64); + sector_t sdist = 0; + if (cfqq->last_request_pos) { + if (cfqq->last_request_pos < blk_rq_pos(rq)) + sdist = blk_rq_pos(rq) - cfqq->last_request_pos; + else + sdist = cfqq->last_request_pos - blk_rq_pos(rq); + } - cfqq->seek_samples = (7*cfqq->seek_samples + 256) / 8; - cfqq->seek_total = (7*cfqq->seek_total + (u64)256*sdist) / 8; - total = cfqq->seek_total + (cfqq->seek_samples/2); - do_div(total, cfqq->seek_samples); - cfqq->seek_mean = (sector_t)total; + cfqq->seek_history <<= 1; + cfqq->seek_history |= (sdist > CFQQ_SEEK_THR); } /* @@ -3023,8 +2998,7 @@ cfq_update_idle_window(struct cfq_data *cfqd, struct cfq_queue *cfqq, cfq_mark_cfqq_deep(cfqq); if (!atomic_read(&cic->ioc->nr_tasks) || !cfqd->cfq_slice_idle || - (!cfq_cfqq_deep(cfqq) && sample_valid(cfqq->seek_samples) - && CFQQ_SEEKY(cfqq))) + (!cfq_cfqq_deep(cfqq) && CFQQ_SEEKY(cfqq))) enable_idle = 0; else if (sample_valid(cic->ttime_samples)) { if (cic->ttime_mean > cfqd->cfq_slice_idle) -- cgit v1.2.3 From 41647e7a91338dba21773a16af7474ef95e0929e Mon Sep 17 00:00:00 2001 From: Corrado Zoccolo Date: Sat, 27 Feb 2010 19:45:40 +0100 Subject: cfq-iosched: rethink seeky detection for SSDs CFQ currently applies the same logic of detecting seeky queues and grouping them together for rotational disks as well as SSDs. For SSDs, the time to complete a request doesn't depend on the request location, but only on the size. This patch therefore changes the criterion to group queues by request size in case of SSDs, in order to achieve better fairness. Signed-off-by: Corrado Zoccolo Signed-off-by: Jens Axboe --- block/cfq-iosched.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'block') diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 3fd8afc2174e..423aee3fd19b 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -47,6 +47,7 @@ static const int cfq_hist_divisor = 4; #define CFQ_SERVICE_SHIFT 12 #define CFQQ_SEEK_THR (sector_t)(8 * 100) +#define CFQQ_SECT_THR_NONROT (sector_t)(2 * 32) #define CFQQ_SEEKY(cfqq) (hweight32(cfqq->seek_history) > 32/8) #define RQ_CIC(rq) \ @@ -2965,6 +2966,7 @@ cfq_update_io_seektime(struct cfq_data *cfqd, struct cfq_queue *cfqq, struct request *rq) { sector_t sdist = 0; + sector_t n_sec = blk_rq_sectors(rq); if (cfqq->last_request_pos) { if (cfqq->last_request_pos < blk_rq_pos(rq)) sdist = blk_rq_pos(rq) - cfqq->last_request_pos; @@ -2973,7 +2975,10 @@ cfq_update_io_seektime(struct cfq_data *cfqd, struct cfq_queue *cfqq, } cfqq->seek_history <<= 1; - cfqq->seek_history |= (sdist > CFQQ_SEEK_THR); + if (blk_queue_nonrot(cfqd->queue)) + cfqq->seek_history |= (n_sec < CFQQ_SECT_THR_NONROT); + else + cfqq->seek_history |= (sdist > CFQQ_SEEK_THR); } /* -- cgit v1.2.3 From 53c583d2269851de9df1c2e992cb2f7f124a5f55 Mon Sep 17 00:00:00 2001 From: Corrado Zoccolo Date: Sun, 28 Feb 2010 19:45:05 +0100 Subject: cfq-iosched: requests "in flight" vs "in driver" clarification Counters for requests "in flight" and "in driver" are used asymmetrically in cfq_may_dispatch, and have slightly different meaning. We split the rq_in_flight counter (was sync_flight) to count both sync and async requests, in order to use this one, which is more accurate in some corner cases. The rq_in_driver counter is coalesced, since individual sync/async counts are not used any more. Signed-off-by: Corrado Zoccolo Signed-off-by: Jens Axboe --- block/cfq-iosched.c | 44 ++++++++++++++++++-------------------------- 1 file changed, 18 insertions(+), 26 deletions(-) (limited to 'block') diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 423aee3fd19b..f27e535ce262 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -222,8 +222,8 @@ struct cfq_data { unsigned int busy_queues; - int rq_in_driver[2]; - int sync_flight; + int rq_in_driver; + int rq_in_flight[2]; /* * queue-depth detection @@ -416,11 +416,6 @@ static struct cfq_queue *cfq_get_queue(struct cfq_data *, bool, static struct cfq_io_context *cfq_cic_lookup(struct cfq_data *, struct io_context *); -static inline int rq_in_driver(struct cfq_data *cfqd) -{ - return cfqd->rq_in_driver[0] + cfqd->rq_in_driver[1]; -} - static inline struct cfq_queue *cic_to_cfqq(struct cfq_io_context *cic, bool is_sync) { @@ -1414,9 +1409,9 @@ static void cfq_activate_request(struct request_queue *q, struct request *rq) { struct cfq_data *cfqd = q->elevator->elevator_data; - cfqd->rq_in_driver[rq_is_sync(rq)]++; + cfqd->rq_in_driver++; cfq_log_cfqq(cfqd, RQ_CFQQ(rq), "activate rq, drv=%d", - rq_in_driver(cfqd)); + cfqd->rq_in_driver); cfqd->last_position = blk_rq_pos(rq) + blk_rq_sectors(rq); } @@ -1424,12 +1419,11 @@ static void cfq_activate_request(struct request_queue *q, struct request *rq) static void cfq_deactivate_request(struct request_queue *q, struct request *rq) { struct cfq_data *cfqd = q->elevator->elevator_data; - const int sync = rq_is_sync(rq); - WARN_ON(!cfqd->rq_in_driver[sync]); - cfqd->rq_in_driver[sync]--; + WARN_ON(!cfqd->rq_in_driver); + cfqd->rq_in_driver--; cfq_log_cfqq(cfqd, RQ_CFQQ(rq), "deactivate rq, drv=%d", - rq_in_driver(cfqd)); + cfqd->rq_in_driver); } static void cfq_remove_request(struct request *rq) @@ -1863,8 +1857,7 @@ static void cfq_dispatch_insert(struct request_queue *q, struct request *rq) cfqq->dispatched++; elv_dispatch_sort(q, rq); - if (cfq_cfqq_sync(cfqq)) - cfqd->sync_flight++; + cfqd->rq_in_flight[cfq_cfqq_sync(cfqq)]++; cfqq->nr_sectors += blk_rq_sectors(rq); } @@ -2211,13 +2204,13 @@ static bool cfq_may_dispatch(struct cfq_data *cfqd, struct cfq_queue *cfqq) /* * Drain async requests before we start sync IO */ - if (cfq_should_idle(cfqd, cfqq) && cfqd->rq_in_driver[BLK_RW_ASYNC]) + if (cfq_should_idle(cfqd, cfqq) && cfqd->rq_in_flight[BLK_RW_ASYNC]) return false; /* * If this is an async queue and we have sync IO in flight, let it wait */ - if (cfqd->sync_flight && !cfq_cfqq_sync(cfqq)) + if (cfqd->rq_in_flight[BLK_RW_SYNC] && !cfq_cfqq_sync(cfqq)) return false; max_dispatch = cfqd->cfq_quantum; @@ -3189,14 +3182,14 @@ static void cfq_update_hw_tag(struct cfq_data *cfqd) { struct cfq_queue *cfqq = cfqd->active_queue; - if (rq_in_driver(cfqd) > cfqd->hw_tag_est_depth) - cfqd->hw_tag_est_depth = rq_in_driver(cfqd); + if (cfqd->rq_in_driver > cfqd->hw_tag_est_depth) + cfqd->hw_tag_est_depth = cfqd->rq_in_driver; if (cfqd->hw_tag == 1) return; if (cfqd->rq_queued <= CFQ_HW_QUEUE_MIN && - rq_in_driver(cfqd) <= CFQ_HW_QUEUE_MIN) + cfqd->rq_in_driver <= CFQ_HW_QUEUE_MIN) return; /* @@ -3206,7 +3199,7 @@ static void cfq_update_hw_tag(struct cfq_data *cfqd) */ if (cfqq && cfq_cfqq_idle_window(cfqq) && cfqq->dispatched + cfqq->queued[0] + cfqq->queued[1] < - CFQ_HW_QUEUE_MIN && rq_in_driver(cfqd) < CFQ_HW_QUEUE_MIN) + CFQ_HW_QUEUE_MIN && cfqd->rq_in_driver < CFQ_HW_QUEUE_MIN) return; if (cfqd->hw_tag_samples++ < 50) @@ -3259,13 +3252,12 @@ static void cfq_completed_request(struct request_queue *q, struct request *rq) cfq_update_hw_tag(cfqd); - WARN_ON(!cfqd->rq_in_driver[sync]); + WARN_ON(!cfqd->rq_in_driver); WARN_ON(!cfqq->dispatched); - cfqd->rq_in_driver[sync]--; + cfqd->rq_in_driver--; cfqq->dispatched--; - if (cfq_cfqq_sync(cfqq)) - cfqd->sync_flight--; + cfqd->rq_in_flight[cfq_cfqq_sync(cfqq)]--; if (sync) { RQ_CIC(rq)->last_end_request = now; @@ -3319,7 +3311,7 @@ static void cfq_completed_request(struct request_queue *q, struct request *rq) } } - if (!rq_in_driver(cfqd)) + if (!cfqd->rq_in_driver) cfq_schedule_dispatch(cfqd); } -- cgit v1.2.3 From abc3c744d0d7f4ad710a948ae73852ffea5fbc3b Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Mon, 1 Mar 2010 09:20:54 +0100 Subject: cfq-iosched: quantum check tweak Currently a queue can only dispatch up to 4 requests if there are other queues. This isn't optimal, device can handle more requests, for example, AHCI can handle 31 requests. I can understand the limit is for fairness, but we could do a tweak: if the queue still has a lot of slice left, sounds we could ignore the limit. Test shows this boost my workload (two thread randread of a SSD) from 78m/s to 100m/s. Thanks for suggestions from Corrado and Vivek for the patch. Signed-off-by: Shaohua Li Signed-off-by: Jens Axboe --- block/cfq-iosched.c | 30 ++++++++++++++++++++++++++---- 1 file changed, 26 insertions(+), 4 deletions(-) (limited to 'block') diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index f27e535ce262..0db07d7771b5 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -19,7 +19,7 @@ * tunables */ /* max queue in one round of service */ -static const int cfq_quantum = 4; +static const int cfq_quantum = 8; static const int cfq_fifo_expire[2] = { HZ / 4, HZ / 8 }; /* maximum backwards seek, in KiB */ static const int cfq_back_max = 16 * 1024; @@ -2197,6 +2197,19 @@ static int cfq_forced_dispatch(struct cfq_data *cfqd) return dispatched; } +static inline bool cfq_slice_used_soon(struct cfq_data *cfqd, + struct cfq_queue *cfqq) +{ + /* the queue hasn't finished any request, can't estimate */ + if (cfq_cfqq_slice_new(cfqq)) + return 1; + if (time_after(jiffies + cfqd->cfq_slice_idle * cfqq->dispatched, + cfqq->slice_end)) + return 1; + + return 0; +} + static bool cfq_may_dispatch(struct cfq_data *cfqd, struct cfq_queue *cfqq) { unsigned int max_dispatch; @@ -2213,7 +2226,7 @@ static bool cfq_may_dispatch(struct cfq_data *cfqd, struct cfq_queue *cfqq) if (cfqd->rq_in_flight[BLK_RW_SYNC] && !cfq_cfqq_sync(cfqq)) return false; - max_dispatch = cfqd->cfq_quantum; + max_dispatch = max_t(unsigned int, cfqd->cfq_quantum / 2, 1); if (cfq_class_idle(cfqq)) max_dispatch = 1; @@ -2230,13 +2243,22 @@ static bool cfq_may_dispatch(struct cfq_data *cfqd, struct cfq_queue *cfqq) /* * We have other queues, don't allow more IO from this one */ - if (cfqd->busy_queues > 1) + if (cfqd->busy_queues > 1 && cfq_slice_used_soon(cfqd, cfqq)) return false; /* * Sole queue user, no limit */ - max_dispatch = -1; + if (cfqd->busy_queues == 1) + max_dispatch = -1; + else + /* + * Normally we start throttling cfqq when cfq_quantum/2 + * requests have been dispatched. But we can drive + * deeper queue depths at the beginning of slice + * subjected to upper limit of cfq_quantum. + * */ + max_dispatch = cfqd->cfq_quantum; } /* -- cgit v1.2.3 From 73e9ffdd0cc8159f876d5e29ecf2d9c1bfca544f Mon Sep 17 00:00:00 2001 From: Richard Kennedy Date: Mon, 1 Mar 2010 10:50:20 +0100 Subject: cfq: remove 8 bytes of padding from cfq_rb_root on 64 bit builds Reorder cfq_rb_root to remove 8 bytes of padding on 64 bit builds. Consequently removing 56 bytes from cfq_group and 64 bytes from cfq_data. Signed-off-by: Richard Kennedy Signed-off-by: Jens Axboe --- block/cfq-iosched.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'block') diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 0db07d7771b5..dee9d9378fee 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -78,11 +78,12 @@ struct cfq_rb_root { struct rb_root rb; struct rb_node *left; unsigned count; + unsigned total_weight; u64 min_vdisktime; struct rb_node *active; - unsigned total_weight; }; -#define CFQ_RB_ROOT (struct cfq_rb_root) { RB_ROOT, NULL, 0, 0, } +#define CFQ_RB_ROOT (struct cfq_rb_root) { .rb = RB_ROOT, .left = NULL, \ + .count = 0, .min_vdisktime = 0, } /* * Per process-grouping structure -- cgit v1.2.3 From 4671a1322052425afa38fcb7980d2fd2bb0fc99b Mon Sep 17 00:00:00 2001 From: Richard Kennedy Date: Mon, 1 Mar 2010 10:57:22 +0100 Subject: block: don't access jiffies when initialising io_context As the comment says the initial value of last_waited is never used, so there is no need to initialise it with the current jiffies. Jiffies is hot enough without accessing it for no reason. Signed-off-by: Richard Kennedy Signed-off-by: Jens Axboe --- block/blk-ioc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'block') diff --git a/block/blk-ioc.c b/block/blk-ioc.c index 98e6bf61b0ac..3f65c8aadb2f 100644 --- a/block/blk-ioc.c +++ b/block/blk-ioc.c @@ -91,7 +91,7 @@ struct io_context *alloc_io_context(gfp_t gfp_flags, int node) spin_lock_init(&ret->lock); ret->ioprio_changed = 0; ret->ioprio = 0; - ret->last_waited = jiffies; /* doesn't matter... */ + ret->last_waited = 0; /* doesn't matter... */ ret->nr_batch_requests = 0; /* because this is 0 */ INIT_RADIX_TREE(&ret->radix_root, GFP_ATOMIC | __GFP_HIGH); INIT_HLIST_HEAD(&ret->cic_list); -- cgit v1.2.3 From 52cf25d0ab7f78eeecc59ac652ed5090f69b619e Mon Sep 17 00:00:00 2001 From: Emese Revfy Date: Tue, 19 Jan 2010 02:58:23 +0100 Subject: Driver core: Constify struct sysfs_ops in struct kobj_type Constify struct sysfs_ops. This is part of the ops structure constification effort started by Arjan van de Ven et al. Benefits of this constification: * prevents modification of data that is shared (referenced) by many other structure instances at runtime * detects/prevents accidental (but not intentional) modification attempts on archs that enforce read-only kernel data at runtime * potentially better optimized code as the compiler can assume that the const data cannot be changed * the compiler/linker move const data into .rodata and therefore exclude them from false sharing Signed-off-by: Emese Revfy Acked-by: David Teigland Acked-by: Matt Domsch Acked-by: Maciej Sosnowski Acked-by: Hans J. Koch Acked-by: Pekka Enberg Acked-by: Jens Axboe Acked-by: Stephen Hemminger Signed-off-by: Greg Kroah-Hartman --- Documentation/kobject.txt | 2 +- arch/ia64/kernel/topology.c | 2 +- arch/powerpc/kernel/cacheinfo.c | 2 +- arch/sh/kernel/cpu/sh4/sq.c | 2 +- arch/x86/kernel/cpu/intel_cacheinfo.c | 2 +- arch/x86/kernel/cpu/mcheck/mce_amd.c | 2 +- block/blk-integrity.c | 2 +- block/blk-sysfs.c | 2 +- block/elevator.c | 2 +- drivers/base/bus.c | 4 ++-- drivers/base/class.c | 2 +- drivers/base/core.c | 2 +- drivers/base/sys.c | 4 ++-- drivers/block/pktcdvd.c | 2 +- drivers/cpufreq/cpufreq.c | 2 +- drivers/cpuidle/sysfs.c | 4 ++-- drivers/dma/ioat/dma.c | 2 +- drivers/dma/ioat/dma.h | 2 +- drivers/edac/edac_device_sysfs.c | 6 +++--- drivers/edac/edac_mc_sysfs.c | 4 ++-- drivers/edac/edac_pci_sysfs.c | 4 ++-- drivers/firmware/edd.c | 2 +- drivers/firmware/efivars.c | 2 +- drivers/firmware/iscsi_ibft.c | 2 +- drivers/firmware/memmap.c | 2 +- drivers/gpu/drm/ttm/ttm_bo.c | 2 +- drivers/gpu/drm/ttm/ttm_memory.c | 2 +- drivers/infiniband/core/cm.c | 2 +- drivers/infiniband/core/sysfs.c | 2 +- drivers/md/dm-sysfs.c | 2 +- drivers/md/md.c | 4 ++-- drivers/net/ibmveth.c | 2 +- drivers/net/iseries_veth.c | 4 ++-- drivers/parisc/pdc_stable.c | 2 +- drivers/pci/hotplug/fakephp.c | 2 +- drivers/pci/slot.c | 2 +- drivers/uio/uio.c | 4 ++-- drivers/uwb/wlp/sysfs.c | 3 +-- drivers/video/omap2/dss/manager.c | 2 +- drivers/video/omap2/dss/overlay.c | 2 +- drivers/xen/sys-hypervisor.c | 2 +- fs/btrfs/sysfs.c | 4 ++-- fs/dlm/lockspace.c | 2 +- fs/ext4/super.c | 2 +- fs/gfs2/sys.c | 2 +- fs/ocfs2/cluster/masklog.c | 2 +- fs/sysfs/file.c | 8 ++++---- include/linux/kobject.h | 4 ++-- kernel/params.c | 2 +- lib/kobject.c | 2 +- mm/slub.c | 2 +- net/bridge/br_private.h | 2 +- net/bridge/br_sysfs_if.c | 2 +- samples/kobject/kset-example.c | 2 +- 54 files changed, 69 insertions(+), 70 deletions(-) (limited to 'block') diff --git a/Documentation/kobject.txt b/Documentation/kobject.txt index c79ab996dada..bdb13817e1e9 100644 --- a/Documentation/kobject.txt +++ b/Documentation/kobject.txt @@ -266,7 +266,7 @@ kobj_type: struct kobj_type { void (*release)(struct kobject *); - struct sysfs_ops *sysfs_ops; + const struct sysfs_ops *sysfs_ops; struct attribute **default_attrs; }; diff --git a/arch/ia64/kernel/topology.c b/arch/ia64/kernel/topology.c index 8f060352e129..b3a5818088d9 100644 --- a/arch/ia64/kernel/topology.c +++ b/arch/ia64/kernel/topology.c @@ -282,7 +282,7 @@ static ssize_t cache_show(struct kobject * kobj, struct attribute * attr, char * return ret; } -static struct sysfs_ops cache_sysfs_ops = { +static const struct sysfs_ops cache_sysfs_ops = { .show = cache_show }; diff --git a/arch/powerpc/kernel/cacheinfo.c b/arch/powerpc/kernel/cacheinfo.c index bb37b1d19a58..01fe9ce28379 100644 --- a/arch/powerpc/kernel/cacheinfo.c +++ b/arch/powerpc/kernel/cacheinfo.c @@ -642,7 +642,7 @@ static struct kobj_attribute *cache_index_opt_attrs[] = { &cache_assoc_attr, }; -static struct sysfs_ops cache_index_ops = { +static const struct sysfs_ops cache_index_ops = { .show = cache_index_show, }; diff --git a/arch/sh/kernel/cpu/sh4/sq.c b/arch/sh/kernel/cpu/sh4/sq.c index fc065f9da6e5..14726eef1ce0 100644 --- a/arch/sh/kernel/cpu/sh4/sq.c +++ b/arch/sh/kernel/cpu/sh4/sq.c @@ -326,7 +326,7 @@ static struct attribute *sq_sysfs_attrs[] = { NULL, }; -static struct sysfs_ops sq_sysfs_ops = { +static const struct sysfs_ops sq_sysfs_ops = { .show = sq_sysfs_show, .store = sq_sysfs_store, }; diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c index eddb1bdd1b8f..b3eeb66c0a51 100644 --- a/arch/x86/kernel/cpu/intel_cacheinfo.c +++ b/arch/x86/kernel/cpu/intel_cacheinfo.c @@ -903,7 +903,7 @@ static ssize_t store(struct kobject *kobj, struct attribute *attr, return ret; } -static struct sysfs_ops sysfs_ops = { +static const struct sysfs_ops sysfs_ops = { .show = show, .store = store, }; diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c index 83a3d1f4efca..cda932ca3ade 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_amd.c +++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c @@ -388,7 +388,7 @@ static ssize_t store(struct kobject *kobj, struct attribute *attr, return ret; } -static struct sysfs_ops threshold_ops = { +static const struct sysfs_ops threshold_ops = { .show = show, .store = store, }; diff --git a/block/blk-integrity.c b/block/blk-integrity.c index 15c630813b1c..96e83c2bdb94 100644 --- a/block/blk-integrity.c +++ b/block/blk-integrity.c @@ -278,7 +278,7 @@ static struct attribute *integrity_attrs[] = { NULL, }; -static struct sysfs_ops integrity_ops = { +static const struct sysfs_ops integrity_ops = { .show = &integrity_attr_show, .store = &integrity_attr_store, }; diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c index e85442415db3..2ae2cb3f362f 100644 --- a/block/blk-sysfs.c +++ b/block/blk-sysfs.c @@ -450,7 +450,7 @@ static void blk_release_queue(struct kobject *kobj) kmem_cache_free(blk_requestq_cachep, q); } -static struct sysfs_ops queue_sysfs_ops = { +static const struct sysfs_ops queue_sysfs_ops = { .show = queue_attr_show, .store = queue_attr_store, }; diff --git a/block/elevator.c b/block/elevator.c index ee3a883840f2..df75676f6671 100644 --- a/block/elevator.c +++ b/block/elevator.c @@ -892,7 +892,7 @@ elv_attr_store(struct kobject *kobj, struct attribute *attr, return error; } -static struct sysfs_ops elv_sysfs_ops = { +static const struct sysfs_ops elv_sysfs_ops = { .show = elv_attr_show, .store = elv_attr_store, }; diff --git a/drivers/base/bus.c b/drivers/base/bus.c index 2afe599eb35d..cca1aa10054c 100644 --- a/drivers/base/bus.c +++ b/drivers/base/bus.c @@ -70,7 +70,7 @@ static ssize_t drv_attr_store(struct kobject *kobj, struct attribute *attr, return ret; } -static struct sysfs_ops driver_sysfs_ops = { +static const struct sysfs_ops driver_sysfs_ops = { .show = drv_attr_show, .store = drv_attr_store, }; @@ -115,7 +115,7 @@ static ssize_t bus_attr_store(struct kobject *kobj, struct attribute *attr, return ret; } -static struct sysfs_ops bus_sysfs_ops = { +static const struct sysfs_ops bus_sysfs_ops = { .show = bus_attr_show, .store = bus_attr_store, }; diff --git a/drivers/base/class.c b/drivers/base/class.c index 2e297cc4cd3d..0147f476b8a9 100644 --- a/drivers/base/class.c +++ b/drivers/base/class.c @@ -63,7 +63,7 @@ static void class_release(struct kobject *kobj) kfree(cp); } -static struct sysfs_ops class_sysfs_ops = { +static const struct sysfs_ops class_sysfs_ops = { .show = class_attr_show, .store = class_attr_store, }; diff --git a/drivers/base/core.c b/drivers/base/core.c index 58ec1069f4b0..b0d6646a2814 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -100,7 +100,7 @@ static ssize_t dev_attr_store(struct kobject *kobj, struct attribute *attr, return ret; } -static struct sysfs_ops dev_sysfs_ops = { +static const struct sysfs_ops dev_sysfs_ops = { .show = dev_attr_show, .store = dev_attr_store, }; diff --git a/drivers/base/sys.c b/drivers/base/sys.c index 747c99e0568b..8980feec5d14 100644 --- a/drivers/base/sys.c +++ b/drivers/base/sys.c @@ -54,7 +54,7 @@ sysdev_store(struct kobject *kobj, struct attribute *attr, return -EIO; } -static struct sysfs_ops sysfs_ops = { +static const struct sysfs_ops sysfs_ops = { .show = sysdev_show, .store = sysdev_store, }; @@ -104,7 +104,7 @@ static ssize_t sysdev_class_store(struct kobject *kobj, struct attribute *attr, return -EIO; } -static struct sysfs_ops sysfs_class_ops = { +static const struct sysfs_ops sysfs_class_ops = { .show = sysdev_class_show, .store = sysdev_class_store, }; diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c index 73d815d3f1b2..39c8514442eb 100644 --- a/drivers/block/pktcdvd.c +++ b/drivers/block/pktcdvd.c @@ -284,7 +284,7 @@ static ssize_t kobj_pkt_store(struct kobject *kobj, return len; } -static struct sysfs_ops kobj_pkt_ops = { +static const struct sysfs_ops kobj_pkt_ops = { .show = kobj_pkt_show, .store = kobj_pkt_store }; diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 67bc2ece7b4b..2d5d575e889d 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -766,7 +766,7 @@ static void cpufreq_sysfs_release(struct kobject *kobj) complete(&policy->kobj_unregister); } -static struct sysfs_ops sysfs_ops = { +static const struct sysfs_ops sysfs_ops = { .show = show, .store = store, }; diff --git a/drivers/cpuidle/sysfs.c b/drivers/cpuidle/sysfs.c index c9cefacabf37..8719b36e1a4d 100644 --- a/drivers/cpuidle/sysfs.c +++ b/drivers/cpuidle/sysfs.c @@ -195,7 +195,7 @@ static ssize_t cpuidle_store(struct kobject * kobj, struct attribute * attr, return ret; } -static struct sysfs_ops cpuidle_sysfs_ops = { +static const struct sysfs_ops cpuidle_sysfs_ops = { .show = cpuidle_show, .store = cpuidle_store, }; @@ -281,7 +281,7 @@ static ssize_t cpuidle_state_show(struct kobject * kobj, return ret; } -static struct sysfs_ops cpuidle_state_sysfs_ops = { +static const struct sysfs_ops cpuidle_state_sysfs_ops = { .show = cpuidle_state_show, }; diff --git a/drivers/dma/ioat/dma.c b/drivers/dma/ioat/dma.c index af14c9a5b8d4..0099340b9616 100644 --- a/drivers/dma/ioat/dma.c +++ b/drivers/dma/ioat/dma.c @@ -1138,7 +1138,7 @@ ioat_attr_show(struct kobject *kobj, struct attribute *attr, char *page) return entry->show(&chan->common, page); } -struct sysfs_ops ioat_sysfs_ops = { +const struct sysfs_ops ioat_sysfs_ops = { .show = ioat_attr_show, }; diff --git a/drivers/dma/ioat/dma.h b/drivers/dma/ioat/dma.h index 4f747a254074..86b97ac8774e 100644 --- a/drivers/dma/ioat/dma.h +++ b/drivers/dma/ioat/dma.h @@ -346,7 +346,7 @@ bool ioat_cleanup_preamble(struct ioat_chan_common *chan, unsigned long *phys_complete); void ioat_kobject_add(struct ioatdma_device *device, struct kobj_type *type); void ioat_kobject_del(struct ioatdma_device *device); -extern struct sysfs_ops ioat_sysfs_ops; +extern const struct sysfs_ops ioat_sysfs_ops; extern struct ioat_sysfs_entry ioat_version_attr; extern struct ioat_sysfs_entry ioat_cap_attr; #endif /* IOATDMA_H */ diff --git a/drivers/edac/edac_device_sysfs.c b/drivers/edac/edac_device_sysfs.c index 53764577035f..5fdedbc0f545 100644 --- a/drivers/edac/edac_device_sysfs.c +++ b/drivers/edac/edac_device_sysfs.c @@ -137,7 +137,7 @@ static ssize_t edac_dev_ctl_info_store(struct kobject *kobj, } /* edac_dev file operations for an 'ctl_info' */ -static struct sysfs_ops device_ctl_info_ops = { +static const struct sysfs_ops device_ctl_info_ops = { .show = edac_dev_ctl_info_show, .store = edac_dev_ctl_info_store }; @@ -373,7 +373,7 @@ static ssize_t edac_dev_instance_store(struct kobject *kobj, } /* edac_dev file operations for an 'instance' */ -static struct sysfs_ops device_instance_ops = { +static const struct sysfs_ops device_instance_ops = { .show = edac_dev_instance_show, .store = edac_dev_instance_store }; @@ -476,7 +476,7 @@ static ssize_t edac_dev_block_store(struct kobject *kobj, } /* edac_dev file operations for a 'block' */ -static struct sysfs_ops device_block_ops = { +static const struct sysfs_ops device_block_ops = { .show = edac_dev_block_show, .store = edac_dev_block_store }; diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c index e1d4ce083481..88840e9fa3e0 100644 --- a/drivers/edac/edac_mc_sysfs.c +++ b/drivers/edac/edac_mc_sysfs.c @@ -245,7 +245,7 @@ static ssize_t csrowdev_store(struct kobject *kobj, struct attribute *attr, return -EIO; } -static struct sysfs_ops csrowfs_ops = { +static const struct sysfs_ops csrowfs_ops = { .show = csrowdev_show, .store = csrowdev_store }; @@ -575,7 +575,7 @@ static ssize_t mcidev_store(struct kobject *kobj, struct attribute *attr, } /* Intermediate show/store table */ -static struct sysfs_ops mci_ops = { +static const struct sysfs_ops mci_ops = { .show = mcidev_show, .store = mcidev_store }; diff --git a/drivers/edac/edac_pci_sysfs.c b/drivers/edac/edac_pci_sysfs.c index fb60a877d768..bef94e3d9944 100644 --- a/drivers/edac/edac_pci_sysfs.c +++ b/drivers/edac/edac_pci_sysfs.c @@ -121,7 +121,7 @@ static ssize_t edac_pci_instance_store(struct kobject *kobj, } /* fs_ops table */ -static struct sysfs_ops pci_instance_ops = { +static const struct sysfs_ops pci_instance_ops = { .show = edac_pci_instance_show, .store = edac_pci_instance_store }; @@ -261,7 +261,7 @@ static ssize_t edac_pci_dev_store(struct kobject *kobj, return -EIO; } -static struct sysfs_ops edac_pci_sysfs_ops = { +static const struct sysfs_ops edac_pci_sysfs_ops = { .show = edac_pci_dev_show, .store = edac_pci_dev_store }; diff --git a/drivers/firmware/edd.c b/drivers/firmware/edd.c index 9e4f59dc7f1e..110e24e50883 100644 --- a/drivers/firmware/edd.c +++ b/drivers/firmware/edd.c @@ -122,7 +122,7 @@ edd_attr_show(struct kobject * kobj, struct attribute *attr, char *buf) return ret; } -static struct sysfs_ops edd_attr_ops = { +static const struct sysfs_ops edd_attr_ops = { .show = edd_attr_show, }; diff --git a/drivers/firmware/efivars.c b/drivers/firmware/efivars.c index f4f709d1370b..082f06ecd327 100644 --- a/drivers/firmware/efivars.c +++ b/drivers/firmware/efivars.c @@ -362,7 +362,7 @@ static ssize_t efivar_attr_store(struct kobject *kobj, struct attribute *attr, return ret; } -static struct sysfs_ops efivar_attr_ops = { +static const struct sysfs_ops efivar_attr_ops = { .show = efivar_attr_show, .store = efivar_attr_store, }; diff --git a/drivers/firmware/iscsi_ibft.c b/drivers/firmware/iscsi_ibft.c index a3600e3ed0fa..ed2801c378de 100644 --- a/drivers/firmware/iscsi_ibft.c +++ b/drivers/firmware/iscsi_ibft.c @@ -519,7 +519,7 @@ static ssize_t ibft_show_attribute(struct kobject *kobj, return ret; } -static struct sysfs_ops ibft_attr_ops = { +static const struct sysfs_ops ibft_attr_ops = { .show = ibft_show_attribute, }; diff --git a/drivers/firmware/memmap.c b/drivers/firmware/memmap.c index 20f645743ead..d59f7cad2269 100644 --- a/drivers/firmware/memmap.c +++ b/drivers/firmware/memmap.c @@ -74,7 +74,7 @@ static struct attribute *def_attrs[] = { NULL }; -static struct sysfs_ops memmap_attr_ops = { +static const struct sysfs_ops memmap_attr_ops = { .show = memmap_attr_show, }; diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c index c7320ce4567d..89c38c49066f 100644 --- a/drivers/gpu/drm/ttm/ttm_bo.c +++ b/drivers/gpu/drm/ttm/ttm_bo.c @@ -128,7 +128,7 @@ static struct attribute *ttm_bo_global_attrs[] = { NULL }; -static struct sysfs_ops ttm_bo_global_ops = { +static const struct sysfs_ops ttm_bo_global_ops = { .show = &ttm_bo_global_show }; diff --git a/drivers/gpu/drm/ttm/ttm_memory.c b/drivers/gpu/drm/ttm/ttm_memory.c index f5245c02b8fd..eb143e04d402 100644 --- a/drivers/gpu/drm/ttm/ttm_memory.c +++ b/drivers/gpu/drm/ttm/ttm_memory.c @@ -152,7 +152,7 @@ static struct attribute *ttm_mem_zone_attrs[] = { NULL }; -static struct sysfs_ops ttm_mem_zone_ops = { +static const struct sysfs_ops ttm_mem_zone_ops = { .show = &ttm_mem_zone_show, .store = &ttm_mem_zone_store }; diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c index 5130fc55b8e2..764787ebe8d8 100644 --- a/drivers/infiniband/core/cm.c +++ b/drivers/infiniband/core/cm.c @@ -3597,7 +3597,7 @@ static ssize_t cm_show_counter(struct kobject *obj, struct attribute *attr, atomic_long_read(&group->counter[cm_attr->index])); } -static struct sysfs_ops cm_counter_ops = { +static const struct sysfs_ops cm_counter_ops = { .show = cm_show_counter }; diff --git a/drivers/infiniband/core/sysfs.c b/drivers/infiniband/core/sysfs.c index 158a214da2f7..1558bb7fc74d 100644 --- a/drivers/infiniband/core/sysfs.c +++ b/drivers/infiniband/core/sysfs.c @@ -79,7 +79,7 @@ static ssize_t port_attr_show(struct kobject *kobj, return port_attr->show(p, port_attr, buf); } -static struct sysfs_ops port_sysfs_ops = { +static const struct sysfs_ops port_sysfs_ops = { .show = port_attr_show }; diff --git a/drivers/md/dm-sysfs.c b/drivers/md/dm-sysfs.c index f91b40942e07..84d2b91e4efb 100644 --- a/drivers/md/dm-sysfs.c +++ b/drivers/md/dm-sysfs.c @@ -75,7 +75,7 @@ static struct attribute *dm_attrs[] = { NULL, }; -static struct sysfs_ops dm_sysfs_ops = { +static const struct sysfs_ops dm_sysfs_ops = { .show = dm_attr_show, }; diff --git a/drivers/md/md.c b/drivers/md/md.c index a20a71e5efd3..fdc1890b6ac5 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -2642,7 +2642,7 @@ static void rdev_free(struct kobject *ko) mdk_rdev_t *rdev = container_of(ko, mdk_rdev_t, kobj); kfree(rdev); } -static struct sysfs_ops rdev_sysfs_ops = { +static const struct sysfs_ops rdev_sysfs_ops = { .show = rdev_attr_show, .store = rdev_attr_store, }; @@ -4059,7 +4059,7 @@ static void md_free(struct kobject *ko) kfree(mddev); } -static struct sysfs_ops md_sysfs_ops = { +static const struct sysfs_ops md_sysfs_ops = { .show = md_attr_show, .store = md_attr_store, }; diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c index f2b937966950..0bc777bac9b4 100644 --- a/drivers/net/ibmveth.c +++ b/drivers/net/ibmveth.c @@ -1577,7 +1577,7 @@ static struct attribute * veth_pool_attrs[] = { NULL, }; -static struct sysfs_ops veth_pool_ops = { +static const struct sysfs_ops veth_pool_ops = { .show = veth_pool_show, .store = veth_pool_store, }; diff --git a/drivers/net/iseries_veth.c b/drivers/net/iseries_veth.c index 966de5d69521..e6e972d9b7ca 100644 --- a/drivers/net/iseries_veth.c +++ b/drivers/net/iseries_veth.c @@ -384,7 +384,7 @@ static struct attribute *veth_cnx_default_attrs[] = { NULL }; -static struct sysfs_ops veth_cnx_sysfs_ops = { +static const struct sysfs_ops veth_cnx_sysfs_ops = { .show = veth_cnx_attribute_show }; @@ -441,7 +441,7 @@ static struct attribute *veth_port_default_attrs[] = { NULL }; -static struct sysfs_ops veth_port_sysfs_ops = { +static const struct sysfs_ops veth_port_sysfs_ops = { .show = veth_port_attribute_show }; diff --git a/drivers/parisc/pdc_stable.c b/drivers/parisc/pdc_stable.c index 0bc5d474b168..1062b8ffe244 100644 --- a/drivers/parisc/pdc_stable.c +++ b/drivers/parisc/pdc_stable.c @@ -481,7 +481,7 @@ pdcspath_attr_store(struct kobject *kobj, struct attribute *attr, return ret; } -static struct sysfs_ops pdcspath_attr_ops = { +static const struct sysfs_ops pdcspath_attr_ops = { .show = pdcspath_attr_show, .store = pdcspath_attr_store, }; diff --git a/drivers/pci/hotplug/fakephp.c b/drivers/pci/hotplug/fakephp.c index 6151389fd903..0a894efd4b9b 100644 --- a/drivers/pci/hotplug/fakephp.c +++ b/drivers/pci/hotplug/fakephp.c @@ -73,7 +73,7 @@ static void legacy_release(struct kobject *kobj) } static struct kobj_type legacy_ktype = { - .sysfs_ops = &(struct sysfs_ops){ + .sysfs_ops = &(const struct sysfs_ops){ .store = legacy_store, .show = legacy_show }, .release = &legacy_release, diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c index 49c9e6c9779a..f75a44d37fbe 100644 --- a/drivers/pci/slot.c +++ b/drivers/pci/slot.c @@ -29,7 +29,7 @@ static ssize_t pci_slot_attr_store(struct kobject *kobj, return attribute->store ? attribute->store(slot, buf, len) : -EIO; } -static struct sysfs_ops pci_slot_sysfs_ops = { +static const struct sysfs_ops pci_slot_sysfs_ops = { .show = pci_slot_attr_show, .store = pci_slot_attr_store, }; diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c index e941367dd28f..4de382acd8f2 100644 --- a/drivers/uio/uio.c +++ b/drivers/uio/uio.c @@ -129,7 +129,7 @@ static ssize_t map_type_show(struct kobject *kobj, struct attribute *attr, return entry->show(mem, buf); } -static struct sysfs_ops map_sysfs_ops = { +static const struct sysfs_ops map_sysfs_ops = { .show = map_type_show, }; @@ -217,7 +217,7 @@ static ssize_t portio_type_show(struct kobject *kobj, struct attribute *attr, return entry->show(port, buf); } -static struct sysfs_ops portio_sysfs_ops = { +static const struct sysfs_ops portio_sysfs_ops = { .show = portio_type_show, }; diff --git a/drivers/uwb/wlp/sysfs.c b/drivers/uwb/wlp/sysfs.c index 0370399ff4bb..6627c94cc854 100644 --- a/drivers/uwb/wlp/sysfs.c +++ b/drivers/uwb/wlp/sysfs.c @@ -615,8 +615,7 @@ ssize_t wlp_wss_attr_store(struct kobject *kobj, struct attribute *attr, return ret; } -static -struct sysfs_ops wss_sysfs_ops = { +static const struct sysfs_ops wss_sysfs_ops = { .show = wlp_wss_attr_show, .store = wlp_wss_attr_store, }; diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c index 913142d4cab1..9acef00c47ea 100644 --- a/drivers/video/omap2/dss/manager.c +++ b/drivers/video/omap2/dss/manager.c @@ -341,7 +341,7 @@ static ssize_t manager_attr_store(struct kobject *kobj, struct attribute *attr, return manager_attr->store(manager, buf, size); } -static struct sysfs_ops manager_sysfs_ops = { +static const struct sysfs_ops manager_sysfs_ops = { .show = manager_attr_show, .store = manager_attr_store, }; diff --git a/drivers/video/omap2/dss/overlay.c b/drivers/video/omap2/dss/overlay.c index 0c5bea263ac6..aed3f3194347 100644 --- a/drivers/video/omap2/dss/overlay.c +++ b/drivers/video/omap2/dss/overlay.c @@ -320,7 +320,7 @@ static ssize_t overlay_attr_store(struct kobject *kobj, struct attribute *attr, return overlay_attr->store(overlay, buf, size); } -static struct sysfs_ops overlay_sysfs_ops = { +static const struct sysfs_ops overlay_sysfs_ops = { .show = overlay_attr_show, .store = overlay_attr_store, }; diff --git a/drivers/xen/sys-hypervisor.c b/drivers/xen/sys-hypervisor.c index ae5cb05a1a1c..bb71ab2336c8 100644 --- a/drivers/xen/sys-hypervisor.c +++ b/drivers/xen/sys-hypervisor.c @@ -426,7 +426,7 @@ static ssize_t hyp_sysfs_store(struct kobject *kobj, return 0; } -static struct sysfs_ops hyp_sysfs_ops = { +static const struct sysfs_ops hyp_sysfs_ops = { .show = hyp_sysfs_show, .store = hyp_sysfs_store, }; diff --git a/fs/btrfs/sysfs.c b/fs/btrfs/sysfs.c index a240b6fa81df..4ce16ef702a3 100644 --- a/fs/btrfs/sysfs.c +++ b/fs/btrfs/sysfs.c @@ -164,12 +164,12 @@ static void btrfs_root_release(struct kobject *kobj) complete(&root->kobj_unregister); } -static struct sysfs_ops btrfs_super_attr_ops = { +static const struct sysfs_ops btrfs_super_attr_ops = { .show = btrfs_super_attr_show, .store = btrfs_super_attr_store, }; -static struct sysfs_ops btrfs_root_attr_ops = { +static const struct sysfs_ops btrfs_root_attr_ops = { .show = btrfs_root_attr_show, .store = btrfs_root_attr_store, }; diff --git a/fs/dlm/lockspace.c b/fs/dlm/lockspace.c index 26a8bd40400a..f994a7dfda85 100644 --- a/fs/dlm/lockspace.c +++ b/fs/dlm/lockspace.c @@ -148,7 +148,7 @@ static void lockspace_kobj_release(struct kobject *k) kfree(ls); } -static struct sysfs_ops dlm_attr_ops = { +static const struct sysfs_ops dlm_attr_ops = { .show = dlm_attr_show, .store = dlm_attr_store, }; diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 2b83b96cb2eb..ce84a6ed4a48 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -2358,7 +2358,7 @@ static void ext4_sb_release(struct kobject *kobj) } -static struct sysfs_ops ext4_attr_ops = { +static const struct sysfs_ops ext4_attr_ops = { .show = ext4_attr_show, .store = ext4_attr_store, }; diff --git a/fs/gfs2/sys.c b/fs/gfs2/sys.c index 543503010ed0..419042f7f0b6 100644 --- a/fs/gfs2/sys.c +++ b/fs/gfs2/sys.c @@ -49,7 +49,7 @@ static ssize_t gfs2_attr_store(struct kobject *kobj, struct attribute *attr, return a->store ? a->store(sdp, buf, len) : len; } -static struct sysfs_ops gfs2_attr_ops = { +static const struct sysfs_ops gfs2_attr_ops = { .show = gfs2_attr_show, .store = gfs2_attr_store, }; diff --git a/fs/ocfs2/cluster/masklog.c b/fs/ocfs2/cluster/masklog.c index b39da877b12f..3bb928a2bf7d 100644 --- a/fs/ocfs2/cluster/masklog.c +++ b/fs/ocfs2/cluster/masklog.c @@ -136,7 +136,7 @@ static ssize_t mlog_store(struct kobject *obj, struct attribute *attr, return mlog_mask_store(mlog_attr->mask, buf, count); } -static struct sysfs_ops mlog_attr_ops = { +static const struct sysfs_ops mlog_attr_ops = { .show = mlog_show, .store = mlog_store, }; diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c index 50b725bcc3f3..ced2299f1c9a 100644 --- a/fs/sysfs/file.c +++ b/fs/sysfs/file.c @@ -53,7 +53,7 @@ struct sysfs_buffer { size_t count; loff_t pos; char * page; - struct sysfs_ops * ops; + const struct sysfs_ops * ops; struct mutex mutex; int needs_read_fill; int event; @@ -75,7 +75,7 @@ static int fill_read_buffer(struct dentry * dentry, struct sysfs_buffer * buffer { struct sysfs_dirent *attr_sd = dentry->d_fsdata; struct kobject *kobj = attr_sd->s_parent->s_dir.kobj; - struct sysfs_ops * ops = buffer->ops; + const struct sysfs_ops * ops = buffer->ops; int ret = 0; ssize_t count; @@ -199,7 +199,7 @@ flush_write_buffer(struct dentry * dentry, struct sysfs_buffer * buffer, size_t { struct sysfs_dirent *attr_sd = dentry->d_fsdata; struct kobject *kobj = attr_sd->s_parent->s_dir.kobj; - struct sysfs_ops * ops = buffer->ops; + const struct sysfs_ops * ops = buffer->ops; int rc; /* need attr_sd for attr and ops, its parent for kobj */ @@ -335,7 +335,7 @@ static int sysfs_open_file(struct inode *inode, struct file *file) struct sysfs_dirent *attr_sd = file->f_path.dentry->d_fsdata; struct kobject *kobj = attr_sd->s_parent->s_dir.kobj; struct sysfs_buffer *buffer; - struct sysfs_ops *ops; + const struct sysfs_ops *ops; int error = -EACCES; char *p; diff --git a/include/linux/kobject.h b/include/linux/kobject.h index 57a1eaae9096..3950d3c2850d 100644 --- a/include/linux/kobject.h +++ b/include/linux/kobject.h @@ -106,7 +106,7 @@ extern char *kobject_get_path(struct kobject *kobj, gfp_t flag); struct kobj_type { void (*release)(struct kobject *kobj); - struct sysfs_ops *sysfs_ops; + const struct sysfs_ops *sysfs_ops; struct attribute **default_attrs; }; @@ -132,7 +132,7 @@ struct kobj_attribute { const char *buf, size_t count); }; -extern struct sysfs_ops kobj_sysfs_ops; +extern const struct sysfs_ops kobj_sysfs_ops; /** * struct kset - a set of kobjects of a specific type, belonging to a specific subsystem. diff --git a/kernel/params.c b/kernel/params.c index 48370be3c0a1..68396d73c838 100644 --- a/kernel/params.c +++ b/kernel/params.c @@ -722,7 +722,7 @@ static ssize_t module_attr_store(struct kobject *kobj, return ret; } -static struct sysfs_ops module_sysfs_ops = { +static const struct sysfs_ops module_sysfs_ops = { .show = module_attr_show, .store = module_attr_store, }; diff --git a/lib/kobject.c b/lib/kobject.c index cecf5a0ef6e1..8115eb1bbf4d 100644 --- a/lib/kobject.c +++ b/lib/kobject.c @@ -700,7 +700,7 @@ static ssize_t kobj_attr_store(struct kobject *kobj, struct attribute *attr, return ret; } -struct sysfs_ops kobj_sysfs_ops = { +const struct sysfs_ops kobj_sysfs_ops = { .show = kobj_attr_show, .store = kobj_attr_store, }; diff --git a/mm/slub.c b/mm/slub.c index a26753c12dcd..a2b8969ba6d0 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -4390,7 +4390,7 @@ static void kmem_cache_release(struct kobject *kobj) kfree(s); } -static struct sysfs_ops slab_sysfs_ops = { +static const struct sysfs_ops slab_sysfs_ops = { .show = slab_attr_show, .store = slab_attr_store, }; diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h index 1cf2cef78584..fef0384e3c0b 100644 --- a/net/bridge/br_private.h +++ b/net/bridge/br_private.h @@ -423,7 +423,7 @@ extern void br_ifinfo_notify(int event, struct net_bridge_port *port); #ifdef CONFIG_SYSFS /* br_sysfs_if.c */ -extern struct sysfs_ops brport_sysfs_ops; +extern const struct sysfs_ops brport_sysfs_ops; extern int br_sysfs_addif(struct net_bridge_port *p); /* br_sysfs_br.c */ diff --git a/net/bridge/br_sysfs_if.c b/net/bridge/br_sysfs_if.c index 696596cd3384..0b9916489d6b 100644 --- a/net/bridge/br_sysfs_if.c +++ b/net/bridge/br_sysfs_if.c @@ -238,7 +238,7 @@ static ssize_t brport_store(struct kobject * kobj, return ret; } -struct sysfs_ops brport_sysfs_ops = { +const struct sysfs_ops brport_sysfs_ops = { .show = brport_show, .store = brport_store, }; diff --git a/samples/kobject/kset-example.c b/samples/kobject/kset-example.c index 7c6088140528..3b126d1f8599 100644 --- a/samples/kobject/kset-example.c +++ b/samples/kobject/kset-example.c @@ -87,7 +87,7 @@ static ssize_t foo_attr_store(struct kobject *kobj, } /* Our custom sysfs_ops that we will associate with our ktype later on */ -static struct sysfs_ops foo_sysfs_ops = { +static const struct sysfs_ops foo_sysfs_ops = { .show = foo_attr_show, .store = foo_attr_store, }; -- cgit v1.2.3 From 67523c48aa74d5637848edeccf285af1c60bf14a Mon Sep 17 00:00:00 2001 From: Ben Blum Date: Wed, 10 Mar 2010 15:22:11 -0800 Subject: cgroups: blkio subsystem as module Modify the Block I/O cgroup subsystem to be able to be built as a module. As the CFQ disk scheduler optionally depends on blk-cgroup, config options in block/Kconfig, block/Kconfig.iosched, and block/blk-cgroup.h are enhanced to support the new module dependency. Signed-off-by: Ben Blum Cc: Li Zefan Cc: Paul Menage Cc: "David S. Miller" Cc: KAMEZAWA Hiroyuki Cc: Lai Jiangshan Cc: Vivek Goyal Cc: Jens Axboe Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- block/Kconfig | 2 +- block/Kconfig.iosched | 2 +- block/blk-cgroup.c | 53 ++++++++++++++++++++++++++++++++++++----------- block/blk-cgroup.h | 10 +++++++-- include/linux/iocontext.h | 2 +- kernel/cgroup.c | 9 ++++++++ 6 files changed, 61 insertions(+), 17 deletions(-) (limited to 'block') diff --git a/block/Kconfig b/block/Kconfig index e20fbde0875c..62a5921321cd 100644 --- a/block/Kconfig +++ b/block/Kconfig @@ -78,7 +78,7 @@ config BLK_DEV_INTEGRITY Protection. If in doubt, say N. config BLK_CGROUP - bool + tristate depends on CGROUPS default n ---help--- diff --git a/block/Kconfig.iosched b/block/Kconfig.iosched index b71abfb0d726..fc71cf071fb2 100644 --- a/block/Kconfig.iosched +++ b/block/Kconfig.iosched @@ -23,6 +23,7 @@ config IOSCHED_DEADLINE config IOSCHED_CFQ tristate "CFQ I/O scheduler" + select BLK_CGROUP if CFQ_GROUP_IOSCHED default y ---help--- The CFQ I/O scheduler tries to distribute bandwidth equally @@ -35,7 +36,6 @@ config IOSCHED_CFQ config CFQ_GROUP_IOSCHED bool "CFQ Group Scheduling support" depends on IOSCHED_CFQ && CGROUPS - select BLK_CGROUP default n ---help--- Enable group IO scheduling in CFQ. diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c index c85d74cae200..4b686ad08eaa 100644 --- a/block/blk-cgroup.c +++ b/block/blk-cgroup.c @@ -23,6 +23,31 @@ static LIST_HEAD(blkio_list); struct blkio_cgroup blkio_root_cgroup = { .weight = 2*BLKIO_WEIGHT_DEFAULT }; EXPORT_SYMBOL_GPL(blkio_root_cgroup); +static struct cgroup_subsys_state *blkiocg_create(struct cgroup_subsys *, + struct cgroup *); +static int blkiocg_can_attach(struct cgroup_subsys *, struct cgroup *, + struct task_struct *, bool); +static void blkiocg_attach(struct cgroup_subsys *, struct cgroup *, + struct cgroup *, struct task_struct *, bool); +static void blkiocg_destroy(struct cgroup_subsys *, struct cgroup *); +static int blkiocg_populate(struct cgroup_subsys *, struct cgroup *); + +struct cgroup_subsys blkio_subsys = { + .name = "blkio", + .create = blkiocg_create, + .can_attach = blkiocg_can_attach, + .attach = blkiocg_attach, + .destroy = blkiocg_destroy, + .populate = blkiocg_populate, +#ifdef CONFIG_BLK_CGROUP + /* note: blkio_subsys_id is otherwise defined in blk-cgroup.h */ + .subsys_id = blkio_subsys_id, +#endif + .use_id = 1, + .module = THIS_MODULE, +}; +EXPORT_SYMBOL_GPL(blkio_subsys); + struct blkio_cgroup *cgroup_to_blkio_cgroup(struct cgroup *cgroup) { return container_of(cgroup_subsys_state(cgroup, blkio_subsys_id), @@ -253,7 +278,8 @@ remove_entry: done: free_css_id(&blkio_subsys, &blkcg->css); rcu_read_unlock(); - kfree(blkcg); + if (blkcg != &blkio_root_cgroup) + kfree(blkcg); } static struct cgroup_subsys_state * @@ -319,17 +345,6 @@ static void blkiocg_attach(struct cgroup_subsys *subsys, struct cgroup *cgroup, task_unlock(tsk); } -struct cgroup_subsys blkio_subsys = { - .name = "blkio", - .create = blkiocg_create, - .can_attach = blkiocg_can_attach, - .attach = blkiocg_attach, - .destroy = blkiocg_destroy, - .populate = blkiocg_populate, - .subsys_id = blkio_subsys_id, - .use_id = 1, -}; - void blkio_policy_register(struct blkio_policy_type *blkiop) { spin_lock(&blkio_list_lock); @@ -345,3 +360,17 @@ void blkio_policy_unregister(struct blkio_policy_type *blkiop) spin_unlock(&blkio_list_lock); } EXPORT_SYMBOL_GPL(blkio_policy_unregister); + +static int __init init_cgroup_blkio(void) +{ + return cgroup_load_subsys(&blkio_subsys); +} + +static void __exit exit_cgroup_blkio(void) +{ + cgroup_unload_subsys(&blkio_subsys); +} + +module_init(init_cgroup_blkio); +module_exit(exit_cgroup_blkio); +MODULE_LICENSE("GPL"); diff --git a/block/blk-cgroup.h b/block/blk-cgroup.h index 84bf745fa775..8ccc20464dae 100644 --- a/block/blk-cgroup.h +++ b/block/blk-cgroup.h @@ -15,7 +15,13 @@ #include -#ifdef CONFIG_BLK_CGROUP +#if defined(CONFIG_BLK_CGROUP) || defined(CONFIG_BLK_CGROUP_MODULE) + +#ifndef CONFIG_BLK_CGROUP +/* When blk-cgroup is a module, its subsys_id isn't a compile-time constant */ +extern struct cgroup_subsys blkio_subsys; +#define blkio_subsys_id blkio_subsys.subsys_id +#endif struct blkio_cgroup { struct cgroup_subsys_state css; @@ -91,7 +97,7 @@ static inline void blkiocg_update_blkio_group_dequeue_stats( struct blkio_group *blkg, unsigned long dequeue) {} #endif -#ifdef CONFIG_BLK_CGROUP +#if defined(CONFIG_BLK_CGROUP) || defined(CONFIG_BLK_CGROUP_MODULE) extern struct blkio_cgroup blkio_root_cgroup; extern struct blkio_cgroup *cgroup_to_blkio_cgroup(struct cgroup *cgroup); extern void blkiocg_add_blkio_group(struct blkio_cgroup *blkcg, diff --git a/include/linux/iocontext.h b/include/linux/iocontext.h index 1195a806fe0c..a0bb301afac0 100644 --- a/include/linux/iocontext.h +++ b/include/linux/iocontext.h @@ -42,7 +42,7 @@ struct io_context { unsigned short ioprio; unsigned short ioprio_changed; -#ifdef CONFIG_BLK_CGROUP +#if defined(CONFIG_BLK_CGROUP) || defined(CONFIG_BLK_CGROUP_MODULE) unsigned short cgroup_changed; #endif diff --git a/kernel/cgroup.c b/kernel/cgroup.c index aa889c96cc74..521591dbab2f 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -705,6 +705,7 @@ void cgroup_lock(void) { mutex_lock(&cgroup_mutex); } +EXPORT_SYMBOL_GPL(cgroup_lock); /** * cgroup_unlock - release lock on cgroup changes @@ -715,6 +716,7 @@ void cgroup_unlock(void) { mutex_unlock(&cgroup_mutex); } +EXPORT_SYMBOL_GPL(cgroup_unlock); /* * A couple of forward declarations required, due to cyclic reference loop: @@ -1639,6 +1641,7 @@ int cgroup_path(const struct cgroup *cgrp, char *buf, int buflen) memmove(buf, start, buf + buflen - start); return 0; } +EXPORT_SYMBOL_GPL(cgroup_path); /** * cgroup_attach_task - attach task 'tsk' to cgroup 'cgrp' @@ -1805,6 +1808,7 @@ bool cgroup_lock_live_group(struct cgroup *cgrp) } return true; } +EXPORT_SYMBOL_GPL(cgroup_lock_live_group); static int cgroup_release_agent_write(struct cgroup *cgrp, struct cftype *cft, const char *buffer) @@ -4082,6 +4086,7 @@ void __css_put(struct cgroup_subsys_state *css, int count) rcu_read_unlock(); WARN_ON_ONCE(val < 1); } +EXPORT_SYMBOL_GPL(__css_put); /* * Notify userspace when a cgroup is released, by running the @@ -4197,6 +4202,7 @@ unsigned short css_id(struct cgroup_subsys_state *css) return cssid->id; return 0; } +EXPORT_SYMBOL_GPL(css_id); unsigned short css_depth(struct cgroup_subsys_state *css) { @@ -4206,6 +4212,7 @@ unsigned short css_depth(struct cgroup_subsys_state *css) return cssid->depth; return 0; } +EXPORT_SYMBOL_GPL(css_depth); bool css_is_ancestor(struct cgroup_subsys_state *child, const struct cgroup_subsys_state *root) @@ -4242,6 +4249,7 @@ void free_css_id(struct cgroup_subsys *ss, struct cgroup_subsys_state *css) spin_unlock(&ss->id_lock); call_rcu(&id->rcu_head, __free_css_id_cb); } +EXPORT_SYMBOL_GPL(free_css_id); /* * This is called by init or create(). Then, calls to this function are @@ -4358,6 +4366,7 @@ struct cgroup_subsys_state *css_lookup(struct cgroup_subsys *ss, int id) return rcu_dereference(cssid->css); } +EXPORT_SYMBOL_GPL(css_lookup); /** * css_get_next - lookup next cgroup under specified hierarchy. -- cgit v1.2.3