From b5494ad83fb52a8e5a7dc1d30cb42cbca5d617f1 Mon Sep 17 00:00:00 2001 From: Boris Ostrovsky Date: Thu, 2 Nov 2017 18:18:03 -0400 Subject: xen/time: Return -ENODEV from xen_get_wallclock() For any other error sync_cmos_clock() will reschedule itself every second or so, for no good reason. Suggested-by: Paolo Bonzini Reviewed-by: Juergen Gross Signed-off-by: Boris Ostrovsky --- arch/x86/xen/time.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/x86/xen/time.c') diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c index 1ecb05db3632..244791ff8201 100644 --- a/arch/x86/xen/time.c +++ b/arch/x86/xen/time.c @@ -74,7 +74,7 @@ static void xen_get_wallclock(struct timespec *now) static int xen_set_wallclock(const struct timespec *now) { - return -1; + return -ENODEV; } static int xen_pvclock_gtod_notify(struct notifier_block *nb, -- cgit v1.2.3 From b888808093113ae7d63d213272d01fea4b8329ed Mon Sep 17 00:00:00 2001 From: Joao Martins Date: Wed, 8 Nov 2017 17:19:56 +0000 Subject: x86/xen/time: set pvclock flags on xen_time_init() Specifically check for PVCLOCK_TSC_STABLE_BIT and if this bit is set, then set it too on pvclock flags. This allows Xen clocksource to use it and thus speeding up xen_clocksource_read() callers (i.e. sched_clock()) Signed-off-by: Joao Martins Reviewed-by: Boris Ostrovsky Signed-off-by: Boris Ostrovsky --- arch/x86/xen/time.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch/x86/xen/time.c') diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c index 244791ff8201..c96e61fd70e7 100644 --- a/arch/x86/xen/time.c +++ b/arch/x86/xen/time.c @@ -372,6 +372,7 @@ static const struct pv_time_ops xen_time_ops __initconst = { static void __init xen_time_init(void) { + struct pvclock_vcpu_time_info *pvti; int cpu = smp_processor_id(); struct timespec tp; @@ -395,6 +396,14 @@ static void __init xen_time_init(void) setup_force_cpu_cap(X86_FEATURE_TSC); + /* + * We check ahead on the primary time info if this + * bit is supported hence speeding up Xen clocksource. + */ + pvti = &__this_cpu_read(xen_vcpu)->time; + if (pvti->flags & PVCLOCK_TSC_STABLE_BIT) + pvclock_set_flags(PVCLOCK_TSC_STABLE_BIT); + xen_setup_runstate_info(cpu); xen_setup_timer(cpu); xen_setup_cpu_clockevents(); -- cgit v1.2.3 From 2229f70b5bbb025e1394b61007938a68060afbfb Mon Sep 17 00:00:00 2001 From: Joao Martins Date: Wed, 8 Nov 2017 17:19:57 +0000 Subject: x86/xen/time: setup vcpu 0 time info page In order to support pvclock vdso on xen we need to setup the time info page for vcpu 0 and register the page with Xen using the VCPUOP_register_vcpu_time_memory_area hypercall. This hypercall will also forcefully update the pvti which will set some of the necessary flags for vdso. Afterwards we check if it supports the PVCLOCK_TSC_STABLE_BIT flag which is mandatory for having vdso/vsyscall support. And if so, it will set the cpu 0 pvti that will be later on used when mapping the vdso image. The xen headers are also updated to include the new hypercall for registering the secondary vcpu_time_info struct. Signed-off-by: Joao Martins Reviewed-by: Juergen Gross Reviewed-by: Boris Ostrovsky Signed-off-by: Boris Ostrovsky --- arch/x86/xen/suspend.c | 4 ++ arch/x86/xen/time.c | 90 +++++++++++++++++++++++++++++++++++++++++++- arch/x86/xen/xen-ops.h | 2 + include/xen/interface/vcpu.h | 42 +++++++++++++++++++++ 4 files changed, 137 insertions(+), 1 deletion(-) (limited to 'arch/x86/xen/time.c') diff --git a/arch/x86/xen/suspend.c b/arch/x86/xen/suspend.c index d6b1680693a9..800ed36ecfba 100644 --- a/arch/x86/xen/suspend.c +++ b/arch/x86/xen/suspend.c @@ -16,6 +16,8 @@ void xen_arch_pre_suspend(void) { + xen_save_time_memory_area(); + if (xen_pv_domain()) xen_pv_pre_suspend(); } @@ -26,6 +28,8 @@ void xen_arch_post_suspend(int cancelled) xen_pv_post_suspend(cancelled); else xen_hvm_post_suspend(cancelled); + + xen_restore_time_memory_area(); } static void xen_vcpu_notify_restore(void *data) diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c index c96e61fd70e7..c2041043c606 100644 --- a/arch/x86/xen/time.c +++ b/arch/x86/xen/time.c @@ -370,6 +370,92 @@ static const struct pv_time_ops xen_time_ops __initconst = { .steal_clock = xen_steal_clock, }; +static struct pvclock_vsyscall_time_info *xen_clock __read_mostly; + +void xen_save_time_memory_area(void) +{ + struct vcpu_register_time_memory_area t; + int ret; + + if (!xen_clock) + return; + + t.addr.v = NULL; + + ret = HYPERVISOR_vcpu_op(VCPUOP_register_vcpu_time_memory_area, 0, &t); + if (ret != 0) + pr_notice("Cannot save secondary vcpu_time_info (err %d)", + ret); + else + clear_page(xen_clock); +} + +void xen_restore_time_memory_area(void) +{ + struct vcpu_register_time_memory_area t; + int ret; + + if (!xen_clock) + return; + + t.addr.v = &xen_clock->pvti; + + ret = HYPERVISOR_vcpu_op(VCPUOP_register_vcpu_time_memory_area, 0, &t); + + /* + * We don't disable VCLOCK_PVCLOCK entirely if it fails to register the + * secondary time info with Xen or if we migrated to a host without the + * necessary flags. On both of these cases what happens is either + * process seeing a zeroed out pvti or seeing no PVCLOCK_TSC_STABLE_BIT + * bit set. Userspace checks the latter and if 0, it discards the data + * in pvti and fallbacks to a system call for a reliable timestamp. + */ + if (ret != 0) + pr_notice("Cannot restore secondary vcpu_time_info (err %d)", + ret); +} + +static void xen_setup_vsyscall_time_info(void) +{ + struct vcpu_register_time_memory_area t; + struct pvclock_vsyscall_time_info *ti; + int ret; + + ti = (struct pvclock_vsyscall_time_info *)get_zeroed_page(GFP_KERNEL); + if (!ti) + return; + + t.addr.v = &ti->pvti; + + ret = HYPERVISOR_vcpu_op(VCPUOP_register_vcpu_time_memory_area, 0, &t); + if (ret) { + pr_notice("xen: VCLOCK_PVCLOCK not supported (err %d)\n", ret); + free_page((unsigned long)ti); + return; + } + + /* + * If primary time info had this bit set, secondary should too since + * it's the same data on both just different memory regions. But we + * still check it in case hypervisor is buggy. + */ + if (!(ti->pvti.flags & PVCLOCK_TSC_STABLE_BIT)) { + t.addr.v = NULL; + ret = HYPERVISOR_vcpu_op(VCPUOP_register_vcpu_time_memory_area, + 0, &t); + if (!ret) + free_page((unsigned long)ti); + + pr_notice("xen: VCLOCK_PVCLOCK not supported (tsc unstable)\n"); + return; + } + + xen_clock = ti; + pvclock_set_pvti_cpu0_va(xen_clock); + + xen_clocksource.archdata.vclock_mode = VCLOCK_PVCLOCK; +} + static void __init xen_time_init(void) { struct pvclock_vcpu_time_info *pvti; @@ -401,8 +487,10 @@ static void __init xen_time_init(void) * bit is supported hence speeding up Xen clocksource. */ pvti = &__this_cpu_read(xen_vcpu)->time; - if (pvti->flags & PVCLOCK_TSC_STABLE_BIT) + if (pvti->flags & PVCLOCK_TSC_STABLE_BIT) { pvclock_set_flags(PVCLOCK_TSC_STABLE_BIT); + xen_setup_vsyscall_time_info(); + } xen_setup_runstate_info(cpu); xen_setup_timer(cpu); diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index c8a6d224f7ed..f96dbedb33d4 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -69,6 +69,8 @@ void xen_setup_runstate_info(int cpu); void xen_teardown_timer(int cpu); u64 xen_clocksource_read(void); void xen_setup_cpu_clockevents(void); +void xen_save_time_memory_area(void); +void xen_restore_time_memory_area(void); void __init xen_init_time_ops(void); void __init xen_hvm_init_time_ops(void); diff --git a/include/xen/interface/vcpu.h b/include/xen/interface/vcpu.h index 98188c87f5c1..504c71601511 100644 --- a/include/xen/interface/vcpu.h +++ b/include/xen/interface/vcpu.h @@ -178,4 +178,46 @@ DEFINE_GUEST_HANDLE_STRUCT(vcpu_register_vcpu_info); /* Send an NMI to the specified VCPU. @extra_arg == NULL. */ #define VCPUOP_send_nmi 11 + +/* + * Get the physical ID information for a pinned vcpu's underlying physical + * processor. The physical ID informmation is architecture-specific. + * On x86: id[31:0]=apic_id, id[63:32]=acpi_id. + * This command returns -EINVAL if it is not a valid operation for this VCPU. + */ +#define VCPUOP_get_physid 12 /* arg == vcpu_get_physid_t */ +struct vcpu_get_physid { + uint64_t phys_id; +}; +DEFINE_GUEST_HANDLE_STRUCT(vcpu_get_physid); +#define xen_vcpu_physid_to_x86_apicid(physid) ((uint32_t)(physid)) +#define xen_vcpu_physid_to_x86_acpiid(physid) ((uint32_t)((physid) >> 32)) + +/* + * Register a memory location to get a secondary copy of the vcpu time + * parameters. The master copy still exists as part of the vcpu shared + * memory area, and this secondary copy is updated whenever the master copy + * is updated (and using the same versioning scheme for synchronisation). + * + * The intent is that this copy may be mapped (RO) into userspace so + * that usermode can compute system time using the time info and the + * tsc. Usermode will see an array of vcpu_time_info structures, one + * for each vcpu, and choose the right one by an existing mechanism + * which allows it to get the current vcpu number (such as via a + * segment limit). It can then apply the normal algorithm to compute + * system time from the tsc. + * + * @extra_arg == pointer to vcpu_register_time_info_memory_area structure. + */ +#define VCPUOP_register_vcpu_time_memory_area 13 +DEFINE_GUEST_HANDLE_STRUCT(vcpu_time_info); +struct vcpu_register_time_memory_area { + union { + GUEST_HANDLE(vcpu_time_info) h; + struct pvclock_vcpu_time_info *v; + uint64_t p; + } addr; +}; +DEFINE_GUEST_HANDLE_STRUCT(vcpu_register_time_memory_area); + #endif /* __XEN_PUBLIC_VCPU_H__ */ -- cgit v1.2.3