From ab444ec97e8bd65fff9d489b9a409fc03979268b Mon Sep 17 00:00:00 2001 From: Gavin Shan Date: Wed, 24 Jul 2013 10:24:57 +0800 Subject: powerpc/pci: Partial tree hotplug support When EEH error happens to one specific PE, the device drivers of its attached EEH devices (PCI devices) are checked to see the further action: reset with complete hotplug, or reset without hotplug. However, that's not enough for those PCI devices whose drivers can't support EEH, or those PCI devices without driver. So we need do so-called "partial hotplug" on basis of PCI devices. In the situation, part of PCI devices of the specific PE are unplugged and plugged again after PE reset. The patch changes pcibios_add_pci_devices() so that it can support full hotplug and so-called "partial" hotplug based on device-tree or real hardware. It's notable that pci_of_scan.c has been changed for a bit in order to support the "partial" hotplug based on dev-tree. Most of the generic code already supports that, we just need to plumb it properly on our side. Signed-off-by: Gavin Shan Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/pci-common.c | 2 ++ arch/powerpc/kernel/pci-hotplug.c | 14 ++++++---- arch/powerpc/kernel/pci_of_scan.c | 56 ++++++++++++++++++++++++++++----------- 3 files changed, 51 insertions(+), 21 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index f46914a0f33e..7d22a675fe1a 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -1462,6 +1462,8 @@ void pcibios_finish_adding_to_bus(struct pci_bus *bus) /* Allocate bus and devices resources */ pcibios_allocate_bus_resources(bus); pcibios_claim_one_bus(bus); + if (!pci_has_flag(PCI_PROBE_ONLY)) + pci_assign_unassigned_bus_resources(bus); /* Fixup EEH */ eeh_add_device_tree_late(bus); diff --git a/arch/powerpc/kernel/pci-hotplug.c b/arch/powerpc/kernel/pci-hotplug.c index fc0831d4971f..c1e17ae68a08 100644 --- a/arch/powerpc/kernel/pci-hotplug.c +++ b/arch/powerpc/kernel/pci-hotplug.c @@ -71,7 +71,7 @@ EXPORT_SYMBOL_GPL(pcibios_remove_pci_devices); */ void pcibios_add_pci_devices(struct pci_bus * bus) { - int slotno, num, mode, pass, max; + int slotno, mode, pass, max; struct pci_dev *dev; struct device_node *dn = pci_bus_to_OF_node(bus); @@ -85,11 +85,15 @@ void pcibios_add_pci_devices(struct pci_bus * bus) /* use ofdt-based probe */ of_rescan_bus(dn, bus); } else if (mode == PCI_PROBE_NORMAL) { - /* use legacy probe */ + /* + * Use legacy probe. In the partial hotplug case, we + * probably have grandchildren devices unplugged. So + * we don't check the return value from pci_scan_slot() in + * order for fully rescan all the way down to pick them up. + * They can have been removed during partial hotplug. + */ slotno = PCI_SLOT(PCI_DN(dn->child)->devfn); - num = pci_scan_slot(bus, PCI_DEVFN(slotno, 0)); - if (!num) - return; + pci_scan_slot(bus, PCI_DEVFN(slotno, 0)); pcibios_setup_bus_devices(bus); max = bus->busn_res.start; for (pass = 0; pass < 2; pass++) { diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c index 6b0ba5854d99..15d9105323bf 100644 --- a/arch/powerpc/kernel/pci_of_scan.c +++ b/arch/powerpc/kernel/pci_of_scan.c @@ -230,11 +230,14 @@ void of_scan_pci_bridge(struct pci_dev *dev) return; } - bus = pci_add_new_bus(dev->bus, dev, busrange[0]); + bus = pci_find_bus(pci_domain_nr(dev->bus), busrange[0]); if (!bus) { - printk(KERN_ERR "Failed to create pci bus for %s\n", - node->full_name); - return; + bus = pci_add_new_bus(dev->bus, dev, busrange[0]); + if (!bus) { + printk(KERN_ERR "Failed to create pci bus for %s\n", + node->full_name); + return; + } } bus->primary = dev->bus->number; @@ -292,6 +295,38 @@ void of_scan_pci_bridge(struct pci_dev *dev) } EXPORT_SYMBOL(of_scan_pci_bridge); +static struct pci_dev *of_scan_pci_dev(struct pci_bus *bus, + struct device_node *dn) +{ + struct pci_dev *dev = NULL; + const u32 *reg; + int reglen, devfn; + + pr_debug(" * %s\n", dn->full_name); + if (!of_device_is_available(dn)) + return NULL; + + reg = of_get_property(dn, "reg", ®len); + if (reg == NULL || reglen < 20) + return NULL; + devfn = (reg[0] >> 8) & 0xff; + + /* Check if the PCI device is already there */ + dev = pci_get_slot(bus, devfn); + if (dev) { + pci_dev_put(dev); + return dev; + } + + /* create a new pci_dev for this device */ + dev = of_create_pci_dev(dn, bus, devfn); + if (!dev) + return NULL; + + pr_debug(" dev header type: %x\n", dev->hdr_type); + return dev; +} + /** * __of_scan_bus - given a PCI bus node, setup bus and scan for child devices * @node: device tree node for the PCI bus @@ -302,8 +337,6 @@ static void __of_scan_bus(struct device_node *node, struct pci_bus *bus, int rescan_existing) { struct device_node *child; - const u32 *reg; - int reglen, devfn; struct pci_dev *dev; pr_debug("of_scan_bus(%s) bus no %d...\n", @@ -311,16 +344,7 @@ static void __of_scan_bus(struct device_node *node, struct pci_bus *bus, /* Scan direct children */ for_each_child_of_node(node, child) { - pr_debug(" * %s\n", child->full_name); - if (!of_device_is_available(child)) - continue; - reg = of_get_property(child, "reg", ®len); - if (reg == NULL || reglen < 20) - continue; - devfn = (reg[0] >> 8) & 0xff; - - /* create a new pci_dev for this device */ - dev = of_create_pci_dev(child, bus, devfn); + dev = of_scan_pci_dev(bus, child); if (!dev) continue; pr_debug(" dev header type: %x\n", dev->hdr_type); -- cgit v1.2.3