From 830145796a5c8f1ca3f87ea619063c1d99a57df5 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Sun, 6 Nov 2011 13:54:56 +0900 Subject: ARM: EXYNOS: Add ARCH_EXYNOS and reorganize arch/arm/mach-exynos The arch/arm/mach-exynos4 directory (CONFIG_ARCH_EXYNOS4) has made for plaforms based on EXYNOS4 SoCs. But since upcoming Samsung's SoCs such as EXYNOS5 (ARM Cortex A15) can reuse most codes in current mach-exynos4, one mach-exynos directory will be used for them. This patch changes to CONFIG_ARCH_EXYNOS (arch/arm/mach-exynos) but keeps original CONFIG_ARCH_EXYNOS4 in mach-exynos/Kconfig to avoid changing in driver side. Cc: Arnd Bergmann Cc: Russell King Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/include/mach/entry-macro.S | 91 +++++++++++++++++++++++++ 1 file changed, 91 insertions(+) create mode 100644 arch/arm/mach-exynos/include/mach/entry-macro.S (limited to 'arch/arm/mach-exynos/include/mach/entry-macro.S') diff --git a/arch/arm/mach-exynos/include/mach/entry-macro.S b/arch/arm/mach-exynos/include/mach/entry-macro.S new file mode 100644 index 000000000000..f5e9fd8e37b4 --- /dev/null +++ b/arch/arm/mach-exynos/include/mach/entry-macro.S @@ -0,0 +1,91 @@ +/* arch/arm/mach-exynos4/include/mach/entry-macro.S + * + * Cloned from arch/arm/mach-realview/include/mach/entry-macro.S + * + * Low-level IRQ helper macros for EXYNOS4 platforms + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. +*/ + +#include +#include +#include + + .macro disable_fiq + .endm + + .macro get_irqnr_preamble, base, tmp + mov \tmp, #0 + + mrc p15, 0, \base, c0, c0, 5 + and \base, \base, #3 + cmp \base, #0 + beq 1f + + ldr \tmp, =gic_bank_offset + ldr \tmp, [\tmp] + cmp \base, #1 + beq 1f + + cmp \base, #2 + addeq \tmp, \tmp, \tmp + addne \tmp, \tmp, \tmp, LSL #1 + +1: ldr \base, =gic_cpu_base_addr + ldr \base, [\base] + add \base, \base, \tmp + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + /* + * The interrupt numbering scheme is defined in the + * interrupt controller spec. To wit: + * + * Interrupts 0-15 are IPI + * 16-28 are reserved + * 29-31 are local. We allow 30 to be used for the watchdog. + * 32-1020 are global + * 1021-1022 are reserved + * 1023 is "spurious" (no interrupt) + * + * For now, we ignore all local interrupts so only return an interrupt if it's + * between 30 and 1020. The test_for_ipi routine below will pick up on IPIs. + * + * A simple read from the controller will tell us the number of the highest + * priority enabled interrupt. We then just need to check whether it is in the + * valid range for an IRQ (30-1020 inclusive). + */ + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + + ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */ + + ldr \tmp, =1021 + + bic \irqnr, \irqstat, #0x1c00 + + cmp \irqnr, #15 + cmpcc \irqnr, \irqnr + cmpne \irqnr, \tmp + cmpcs \irqnr, \irqnr + addne \irqnr, \irqnr, #32 + + .endm + + /* We assume that irqstat (the raw value of the IRQ acknowledge + * register) is preserved from the macro above. + * If there is an IPI, we immediately signal end of interrupt on the + * controller, since this requires the original irqstat value which + * we won't easily be able to recreate later. + */ + + .macro test_for_ipi, irqnr, irqstat, base, tmp + bic \irqnr, \irqstat, #0x1c00 + cmp \irqnr, #16 + strcc \irqstat, [\base, #GIC_CPU_EOI] + cmpcs \irqnr, \irqnr + .endm -- cgit v1.2.3