From 1004a2977bdc7566bca87c565541c3232ed467c4 Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Tue, 30 May 2017 11:20:53 +0200 Subject: ARM: dts: at91: Switch to the new NAND bindings Use the new EBI/NAND bindings to declare NAND chips and remove old NAND nodes along the way. Note that we keep using old bindings in at91rm9200.dtsi because this SoC is not supported by the EBI driver. Signed-off-by: Boris Brezillon Tested-by: Peter Rosin Signed-off-by: Alexandre Belloni --- arch/arm/boot/dts/at91-kizboxmini.dts | 52 +++++++++++++++++++++++++++++------ 1 file changed, 43 insertions(+), 9 deletions(-) (limited to 'arch/arm/boot/dts/at91-kizboxmini.dts') diff --git a/arch/arm/boot/dts/at91-kizboxmini.dts b/arch/arm/boot/dts/at91-kizboxmini.dts index 9682d105d4d8..33238fcb6d0b 100644 --- a/arch/arm/boot/dts/at91-kizboxmini.dts +++ b/arch/arm/boot/dts/at91-kizboxmini.dts @@ -68,6 +68,49 @@ status = "okay"; }; + ebi: ebi@10000000 { + pinctrl-0 = <&pinctrl_ebi_addr_nand + &pinctrl_ebi_data_0_7>; + pinctrl-names = "default"; + status = "okay"; + + nand_controller: nand-controller { + status = "okay"; + pinctrl-0 = <&pinctrl_nand_oe_we + &pinctrl_nand_cs + &pinctrl_nand_rb>; + pinctrl-names = "default"; + + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + bootstrap@0 { + label = "bootstrap"; + reg = <0x0 0x20000>; + }; + + ubi@20000 { + label = "ubi"; + reg = <0x20000 0x7fe0000>; + }; + }; + }; + }; + }; + nand0: nand@40000000 { nand-bus-width = <8>; nand-ecc-mode = "hw"; @@ -77,15 +120,6 @@ nand-on-flash-bbt; status = "okay"; - bootstrap@0 { - label = "bootstrap"; - reg = <0x0 0x20000>; - }; - - ubi@20000 { - label = "ubi"; - reg = <0x20000 0x7fe0000>; - }; }; }; -- cgit v1.2.3