From 1f234ff1621787860cfcca6aa8fb626519405a72 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 17 Apr 2019 06:46:26 -0300 Subject: docs: hwmon: pmbus files: convert to ReST format Convert pmbus files to ReST format, in order to allow them to be parsed by Sphinx. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Guenter Roeck --- Documentation/hwmon/max8688 | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) (limited to 'Documentation/hwmon/max8688') diff --git a/Documentation/hwmon/max8688 b/Documentation/hwmon/max8688 index ca233bec7a8a..43da139234c1 100644 --- a/Documentation/hwmon/max8688 +++ b/Documentation/hwmon/max8688 @@ -2,9 +2,13 @@ Kernel driver max8688 ===================== Supported chips: + * Maxim MAX8688 + Prefix: 'max8688' + Addresses scanned: - + Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX8688.pdf Author: Guenter Roeck @@ -40,23 +44,28 @@ Sysfs entries The following attributes are supported. Limits are read-write; all other attributes are read-only. +======================= ======================================================== in1_label "vout1" in1_input Measured voltage. From READ_VOUT register. in1_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register. in1_max Maximum voltage. From VOUT_OV_WARN_LIMIT register. in1_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register. -in1_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register. +in1_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT + register. in1_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status. in1_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status. -in1_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT status. -in1_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT status. +in1_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT + status. +in1_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT + status. in1_highest Historical maximum voltage. in1_reset_history Write any value to reset history. curr1_label "iout1" curr1_input Measured current. From READ_IOUT register. curr1_max Maximum current. From IOUT_OC_WARN_LIMIT register. -curr1_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT register. +curr1_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT + register. curr1_max_alarm Current high alarm. From IOUT_OC_WARN_LIMIT register. curr1_crit_alarm Current critical high alarm. From IOUT_OC_FAULT status. curr1_highest Historical maximum current. @@ -73,3 +82,4 @@ temp1_crit_alarm Chip temperature critical high alarm. Set by comparing status is set. temp1_highest Historical maximum temperature. temp1_reset_history Write any value to reset history. +======================= ======================================================== -- cgit v1.2.3