From 8f8986e932c5f81e51aacc1e675393300a0a5b87 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 29 May 2020 20:06:31 +0200 Subject: dt-bindings: Merge gpio-usb-b-connector with usb-connector The binding for usb-connector is a superset of gpio-usb-b-connector. One major difference is that gpio-usb-b-connector requires at least one of the vbus-gpios and id-gpios properties to be specified. Merge the two bindings by adding the compatible string combination for the GPIO USB-B variant and an extra conditional for the required properties list to the usb-connector.yaml file. Signed-off-by: Thierry Reding Signed-off-by: Rob Herring --- .../devicetree/bindings/usb/usb-conn-gpio.txt | 30 ---------------------- 1 file changed, 30 deletions(-) delete mode 100644 Documentation/devicetree/bindings/usb/usb-conn-gpio.txt (limited to 'Documentation/devicetree/bindings/usb') diff --git a/Documentation/devicetree/bindings/usb/usb-conn-gpio.txt b/Documentation/devicetree/bindings/usb/usb-conn-gpio.txt deleted file mode 100644 index ec80641208a5..000000000000 --- a/Documentation/devicetree/bindings/usb/usb-conn-gpio.txt +++ /dev/null @@ -1,30 +0,0 @@ -USB GPIO Based Connection Detection - -This is typically used to switch dual role mode from the USB ID pin connected -to an input GPIO, and also used to enable/disable device mode from the USB -Vbus pin connected to an input GPIO. - -Required properties: -- compatible : should include "gpio-usb-b-connector" and "usb-b-connector". -- id-gpios, vbus-gpios : input gpios, either one of them must be present, - and both can be present as well. - see connector/usb-connector.yaml - -Optional properties: -- vbus-supply : can be present if needed when supports dual role mode. - see connector/usb-connector.yaml - -- Sub-nodes: - - port : can be present. - see graph.txt - -Example: - -&mtu3 { - connector { - compatible = "gpio-usb-b-connector", "usb-b-connector"; - type = "micro"; - id-gpios = <&pio 12 GPIO_ACTIVE_HIGH>; - vbus-supply = <&usb_p0_vbus>; - }; -}; -- cgit v1.2.3