From df68734101e9ebad7a48e982cbea1775c170c2a3 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Mon, 21 Jan 2019 16:45:52 +0100 Subject: dt-bindings: phy: Move the Cadence D-PHY bindings The Cadence D-PHY bindings was defined as part of the DSI block so far. However, since it's now going to be a separate driver, we need to move the binding to a file of its own. Acked-by: Sakari Ailus Signed-off-by: Maxime Ripard Signed-off-by: Kishon Vijay Abraham I --- Documentation/devicetree/bindings/phy/cdns,dphy.txt | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/cdns,dphy.txt (limited to 'Documentation/devicetree/bindings/phy') diff --git a/Documentation/devicetree/bindings/phy/cdns,dphy.txt b/Documentation/devicetree/bindings/phy/cdns,dphy.txt new file mode 100644 index 000000000000..1095bc4e72d9 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/cdns,dphy.txt @@ -0,0 +1,20 @@ +Cadence DPHY +============ + +Cadence DPHY block. + +Required properties: +- compatible: should be set to "cdns,dphy". +- reg: physical base address and length of the DPHY registers. +- clocks: DPHY reference clocks. +- clock-names: must contain "psm" and "pll_ref". +- #phy-cells: must be set to 0. + +Example: + dphy0: dphy@fd0e0000{ + compatible = "cdns,dphy"; + reg = <0x0 0xfd0e0000 0x0 0x1000>; + clocks = <&psm_clk>, <&pll_ref_clk>; + clock-names = "psm", "pll_ref"; + #phy-cells = <0>; + }; -- cgit v1.2.3