From d8958824cf0714cc4ddcf320cf12028277ad55c4 Mon Sep 17 00:00:00 2001 From: Fabrice Gasnier Date: Mon, 28 Aug 2017 12:04:13 +0200 Subject: iio: counter: Add support for STM32 LPTimer Add support for STM32 Low-Power Timer, that can be used as counter or quadrature encoder. Signed-off-by: Fabrice Gasnier Reviewed-by: Jonathan Cameron Signed-off-by: Lee Jones --- .../ABI/testing/sysfs-bus-iio-lptimer-stm32 | 57 ++++++++++++++++++++++ 1 file changed, 57 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-lptimer-stm32 (limited to 'Documentation/ABI') diff --git a/Documentation/ABI/testing/sysfs-bus-iio-lptimer-stm32 b/Documentation/ABI/testing/sysfs-bus-iio-lptimer-stm32 new file mode 100644 index 000000000000..ad2cc63e4bf8 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-lptimer-stm32 @@ -0,0 +1,57 @@ +What: /sys/bus/iio/devices/iio:deviceX/in_count0_preset +KernelVersion: 4.13 +Contact: fabrice.gasnier@st.com +Description: + Reading returns the current preset value. Writing sets the + preset value. Encoder counts continuously from 0 to preset + value, depending on direction (up/down). + +What: /sys/bus/iio/devices/iio:deviceX/in_count_quadrature_mode_available +KernelVersion: 4.13 +Contact: fabrice.gasnier@st.com +Description: + Reading returns the list possible quadrature modes. + +What: /sys/bus/iio/devices/iio:deviceX/in_count0_quadrature_mode +KernelVersion: 4.13 +Contact: fabrice.gasnier@st.com +Description: + Configure the device counter quadrature modes: + - non-quadrature: + Encoder IN1 input servers as the count input (up + direction). + - quadrature: + Encoder IN1 and IN2 inputs are mixed to get direction + and count. + +What: /sys/bus/iio/devices/iio:deviceX/in_count_polarity_available +KernelVersion: 4.13 +Contact: fabrice.gasnier@st.com +Description: + Reading returns the list possible active edges. + +What: /sys/bus/iio/devices/iio:deviceX/in_count0_polarity +KernelVersion: 4.13 +Contact: fabrice.gasnier@st.com +Description: + Configure the device encoder/counter active edge: + - rising-edge + - falling-edge + - both-edges + + In non-quadrature mode, device counts up on active edge. + In quadrature mode, encoder counting scenarios are as follows: + ---------------------------------------------------------------- + | Active | Level on | IN1 signal | IN2 signal | + | edge | opposite |------------------------------------------ + | | signal | Rising | Falling | Rising | Falling | + ---------------------------------------------------------------- + | Rising | High -> | Down | - | Up | - | + | edge | Low -> | Up | - | Down | - | + ---------------------------------------------------------------- + | Falling | High -> | - | Up | - | Down | + | edge | Low -> | - | Down | - | Up | + ---------------------------------------------------------------- + | Both | High -> | Down | Up | Up | Down | + | edges | Low -> | Up | Down | Down | Up | + ---------------------------------------------------------------- -- cgit v1.2.3