From d6990976af7c5d8f55903bfb4289b6fb030bf754 Mon Sep 17 00:00:00 2001 From: Eyal Birger Date: Thu, 7 Jun 2018 10:11:02 +0300 Subject: vti6: fix PMTU caching and reporting on xmit When setting the skb->dst before doing the MTU check, the route PMTU caching and reporting is done on the new dst which is about to be released. Instead, PMTU handling should be done using the original dst. This is aligned with IPv4 VTI. Fixes: ccd740cbc6 ("vti6: Add pmtu handling to vti6_xmit.") Signed-off-by: Eyal Birger Signed-off-by: Steffen Klassert --- net/ipv6/ip6_vti.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/net/ipv6/ip6_vti.c b/net/ipv6/ip6_vti.c index b7f28deddaea..c72ae3a4fe09 100644 --- a/net/ipv6/ip6_vti.c +++ b/net/ipv6/ip6_vti.c @@ -480,10 +480,6 @@ vti6_xmit(struct sk_buff *skb, struct net_device *dev, struct flowi *fl) goto tx_err_dst_release; } - skb_scrub_packet(skb, !net_eq(t->net, dev_net(dev))); - skb_dst_set(skb, dst); - skb->dev = skb_dst(skb)->dev; - mtu = dst_mtu(dst); if (!skb->ignore_df && skb->len > mtu) { skb_dst_update_pmtu(skb, mtu); @@ -498,9 +494,14 @@ vti6_xmit(struct sk_buff *skb, struct net_device *dev, struct flowi *fl) htonl(mtu)); } - return -EMSGSIZE; + err = -EMSGSIZE; + goto tx_err_dst_release; } + skb_scrub_packet(skb, !net_eq(t->net, dev_net(dev))); + skb_dst_set(skb, dst); + skb->dev = skb_dst(skb)->dev; + err = dst_output(t->net, skb->sk, skb); if (net_xmit_eval(err) == 0) { struct pcpu_sw_netstats *tstats = this_cpu_ptr(dev->tstats); -- cgit v1.2.3 From 74c11e300c103af47db5b658fdcf28002421e250 Mon Sep 17 00:00:00 2001 From: Alexey Brodkin Date: Fri, 1 Jun 2018 14:34:33 +0300 Subject: ARC: Explicitly add -mmedium-calls to CFLAGS GCC built for arc*-*-linux has "-mmedium-calls" implicitly enabled by default thus we don't see any problems during Linux kernel compilation. ----------------------------->8------------------------ arc-linux-gcc -mcpu=arc700 -Q --help=target | grep calls -mlong-calls [disabled] -mmedium-calls [enabled] ----------------------------->8------------------------ But if we try to use so-called Elf32 toolchain with GCC configured for arc*-*-elf* then we'd see the following failure: ----------------------------->8------------------------ init/do_mounts.o: In function 'init_rootfs': do_mounts.c:(.init.text+0x108): relocation truncated to fit: R_ARC_S21W_PCREL against symbol 'unregister_filesystem' defined in .text section in fs/filesystems.o arc-elf32-ld: final link failed: Symbol needs debug section which does not exist make: *** [vmlinux] Error 1 ----------------------------->8------------------------ That happens because neither "-mmedium-calls" nor "-mlong-calls" are enabled in Elf32 GCC: ----------------------------->8------------------------ arc-elf32-gcc -mcpu=arc700 -Q --help=target | grep calls -mlong-calls [disabled] -mmedium-calls [disabled] ----------------------------->8------------------------ Now to make it possible to use Elf32 toolchain for building Linux kernel we're explicitly add "-mmedium-calls" to CFLAGS. And since we add "-mmedium-calls" to the global CFLAGS there's no point in having per-file copies thus removing them. Signed-off-by: Alexey Brodkin Signed-off-by: Vineet Gupta --- arch/arc/Makefile | 15 +-------------- 1 file changed, 1 insertion(+), 14 deletions(-) diff --git a/arch/arc/Makefile b/arch/arc/Makefile index d37f49d6a27f..6c1b20dd76ad 100644 --- a/arch/arc/Makefile +++ b/arch/arc/Makefile @@ -16,7 +16,7 @@ endif KBUILD_DEFCONFIG := nsim_700_defconfig -cflags-y += -fno-common -pipe -fno-builtin -D__linux__ +cflags-y += -fno-common -pipe -fno-builtin -mmedium-calls -D__linux__ cflags-$(CONFIG_ISA_ARCOMPACT) += -mA7 cflags-$(CONFIG_ISA_ARCV2) += -mcpu=archs @@ -140,16 +140,3 @@ dtbs: scripts archclean: $(Q)$(MAKE) $(clean)=$(boot) - -# Hacks to enable final link due to absence of link-time branch relexation -# and gcc choosing optimal(shorter) branches at -O3 -# -# vineetg Feb 2010: -mlong-calls switched off for overall kernel build -# However lib/decompress_inflate.o (.init.text) calls -# zlib_inflate_workspacesize (.text) causing relocation errors. -# Thus forcing all exten calls in this file to be long calls -export CFLAGS_decompress_inflate.o = -mmedium-calls -export CFLAGS_initramfs.o = -mmedium-calls -ifdef CONFIG_SMP -export CFLAGS_core.o = -mmedium-calls -endif -- cgit v1.2.3 From c1e3f64f87381ed3768b9247ab0cd08b41927da6 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Fri, 1 Jun 2018 08:24:08 -0500 Subject: qtnfmac: fix NULL pointer dereference In case *vif* is NULL at 655: if (!vif), the execution path jumps to label out, where *vif* is dereferenced at 679: if (vif->sta_state == QTNF_STA_CONNECTING) Fix this by immediately returning when *vif* is NULL instead of jumping to label out. Addresses-Coverity-ID: 1469567 ("Dereference after null check") Fixes: 480daa9cb62c ("qtnfmac: fix invalid STA state on EAPOL failure") Signed-off-by: Gustavo A. R. Silva Reviewed-by: Sergey Matyukevich Signed-off-by: Kalle Valo --- drivers/net/wireless/quantenna/qtnfmac/cfg80211.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/wireless/quantenna/qtnfmac/cfg80211.c b/drivers/net/wireless/quantenna/qtnfmac/cfg80211.c index 220e2b710208..ae0ca8006849 100644 --- a/drivers/net/wireless/quantenna/qtnfmac/cfg80211.c +++ b/drivers/net/wireless/quantenna/qtnfmac/cfg80211.c @@ -654,8 +654,7 @@ qtnf_disconnect(struct wiphy *wiphy, struct net_device *dev, vif = qtnf_mac_get_base_vif(mac); if (!vif) { pr_err("MAC%u: primary VIF is not configured\n", mac->macid); - ret = -EFAULT; - goto out; + return -EFAULT; } if (vif->wdev.iftype != NL80211_IFTYPE_STATION) { -- cgit v1.2.3 From 755abd247a3da273af3b90d1dd31bc61794ae7d7 Mon Sep 17 00:00:00 2001 From: Xinming Hu Date: Mon, 11 Jun 2018 09:52:52 +0800 Subject: MAINTAINERS: update Xinming's email address I'd like to use this new gmail from now on. Cc: Ganapathi Bhat Signed-off-by: Xinming Hu Signed-off-by: Kalle Valo --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 9d5eeff51b5f..8dbe8b56010d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8629,7 +8629,7 @@ MARVELL MWIFIEX WIRELESS DRIVER M: Amitkumar Karwar M: Nishant Sarmukadam M: Ganapathi Bhat -M: Xinming Hu +M: Xinming Hu L: linux-wireless@vger.kernel.org S: Maintained F: drivers/net/wireless/marvell/mwifiex/ -- cgit v1.2.3 From e01b4f624278d5efe5fb5da585ca371947b16680 Mon Sep 17 00:00:00 2001 From: Liam Girdwood Date: Thu, 14 Jun 2018 20:26:42 +0100 Subject: ASoC: dapm: Fix potential DAI widget pointer deref when linking DAIs Sometime a component or topology may configure a DAI widget with no private data leading to a dev_dbg() dereferencne of this data. Fix this to check for non NULL private data and let users know if widget is missing DAI. Signed-off-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/soc-dapm.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 36a39ba30226..8ede773b1db8 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -4073,6 +4073,13 @@ int snd_soc_dapm_link_dai_widgets(struct snd_soc_card *card) continue; } + /* let users know there is no DAI to link */ + if (!dai_w->priv) { + dev_dbg(card->dev, "dai widget %s has no DAI\n", + dai_w->name); + continue; + } + dai = dai_w->priv; /* ...find all widgets with the same stream and link them */ -- cgit v1.2.3 From c60b613a7097cff20fdd05e2891ce69542f0d5a3 Mon Sep 17 00:00:00 2001 From: Liam Girdwood Date: Thu, 14 Jun 2018 20:50:37 +0100 Subject: ASoC: topology: Give more data to clients via callbacks Give topology clients more access to the topology data by passing index, pcm, link_config and dai_driver to clients. This allows clients to fully instantiate and track topology objects. The SOF driver is the first user of these new APIs and needs them to build component topology driver and FW objects. Signed-off-by: Liam Girdwood Signed-off-by: Mark Brown --- include/sound/soc-topology.h | 23 ++++++++++++++--------- sound/soc/intel/skylake/skl-pcm.c | 7 ++++--- sound/soc/intel/skylake/skl-topology.c | 5 +++-- sound/soc/intel/skylake/skl-topology.h | 5 +++-- sound/soc/soc-topology.c | 31 ++++++++++++++++++------------- 5 files changed, 42 insertions(+), 29 deletions(-) diff --git a/include/sound/soc-topology.h b/include/sound/soc-topology.h index f552c3f56368..e1f265e21ee1 100644 --- a/include/sound/soc-topology.h +++ b/include/sound/soc-topology.h @@ -30,6 +30,8 @@ struct snd_soc_dapm_context; struct snd_soc_card; struct snd_kcontrol_new; struct snd_soc_dai_link; +struct snd_soc_dai_driver; +struct snd_soc_dai; /* object scan be loaded and unloaded in groups with identfying indexes */ #define SND_SOC_TPLG_INDEX_ALL 0 /* ID that matches all FW objects */ @@ -109,35 +111,38 @@ struct snd_soc_tplg_widget_events { struct snd_soc_tplg_ops { /* external kcontrol init - used for any driver specific init */ - int (*control_load)(struct snd_soc_component *, + int (*control_load)(struct snd_soc_component *, int index, struct snd_kcontrol_new *, struct snd_soc_tplg_ctl_hdr *); int (*control_unload)(struct snd_soc_component *, struct snd_soc_dobj *); /* external widget init - used for any driver specific init */ - int (*widget_load)(struct snd_soc_component *, + int (*widget_load)(struct snd_soc_component *, int index, struct snd_soc_dapm_widget *, struct snd_soc_tplg_dapm_widget *); - int (*widget_ready)(struct snd_soc_component *, + int (*widget_ready)(struct snd_soc_component *, int index, struct snd_soc_dapm_widget *, struct snd_soc_tplg_dapm_widget *); int (*widget_unload)(struct snd_soc_component *, struct snd_soc_dobj *); /* FE DAI - used for any driver specific init */ - int (*dai_load)(struct snd_soc_component *, - struct snd_soc_dai_driver *dai_drv); + int (*dai_load)(struct snd_soc_component *, int index, + struct snd_soc_dai_driver *dai_drv, + struct snd_soc_tplg_pcm *pcm, struct snd_soc_dai *dai); + int (*dai_unload)(struct snd_soc_component *, struct snd_soc_dobj *); /* DAI link - used for any driver specific init */ - int (*link_load)(struct snd_soc_component *, - struct snd_soc_dai_link *link); + int (*link_load)(struct snd_soc_component *, int index, + struct snd_soc_dai_link *link, + struct snd_soc_tplg_link_config *cfg); int (*link_unload)(struct snd_soc_component *, struct snd_soc_dobj *); /* callback to handle vendor bespoke data */ - int (*vendor_load)(struct snd_soc_component *, + int (*vendor_load)(struct snd_soc_component *, int index, struct snd_soc_tplg_hdr *); int (*vendor_unload)(struct snd_soc_component *, struct snd_soc_tplg_hdr *); @@ -146,7 +151,7 @@ struct snd_soc_tplg_ops { void (*complete)(struct snd_soc_component *); /* manifest - optional to inform component of manifest */ - int (*manifest)(struct snd_soc_component *, + int (*manifest)(struct snd_soc_component *, int index, struct snd_soc_tplg_manifest *); /* vendor specific kcontrol handlers available for binding */ diff --git a/sound/soc/intel/skylake/skl-pcm.c b/sound/soc/intel/skylake/skl-pcm.c index afa86b9e4dcf..1f4dd08d36c5 100644 --- a/sound/soc/intel/skylake/skl-pcm.c +++ b/sound/soc/intel/skylake/skl-pcm.c @@ -1017,10 +1017,11 @@ static struct snd_soc_dai_driver skl_platform_dai[] = { }, }; -int skl_dai_load(struct snd_soc_component *cmp, - struct snd_soc_dai_driver *pcm_dai) +int skl_dai_load(struct snd_soc_component *cmp, int index, + struct snd_soc_dai_driver *dai_drv, + struct snd_soc_tplg_pcm *pcm, struct snd_soc_dai *dai) { - pcm_dai->ops = &skl_pcm_dai_ops; + dai_drv->ops = &skl_pcm_dai_ops; return 0; } diff --git a/sound/soc/intel/skylake/skl-topology.c b/sound/soc/intel/skylake/skl-topology.c index fcdc716754b6..647e52aecdc3 100644 --- a/sound/soc/intel/skylake/skl-topology.c +++ b/sound/soc/intel/skylake/skl-topology.c @@ -3024,7 +3024,7 @@ void skl_cleanup_resources(struct skl *skl) * information to the driver about module and pipeline parameters which DSP * FW expects like ids, resource values, formats etc */ -static int skl_tplg_widget_load(struct snd_soc_component *cmpnt, +static int skl_tplg_widget_load(struct snd_soc_component *cmpnt, int index, struct snd_soc_dapm_widget *w, struct snd_soc_tplg_dapm_widget *tplg_w) { @@ -3131,6 +3131,7 @@ static int skl_init_enum_data(struct device *dev, struct soc_enum *se, } static int skl_tplg_control_load(struct snd_soc_component *cmpnt, + int index, struct snd_kcontrol_new *kctl, struct snd_soc_tplg_ctl_hdr *hdr) { @@ -3619,7 +3620,7 @@ static int skl_tplg_get_manifest_data(struct snd_soc_tplg_manifest *manifest, return 0; } -static int skl_manifest_load(struct snd_soc_component *cmpnt, +static int skl_manifest_load(struct snd_soc_component *cmpnt, int index, struct snd_soc_tplg_manifest *manifest) { struct hdac_ext_bus *ebus = snd_soc_component_get_drvdata(cmpnt); diff --git a/sound/soc/intel/skylake/skl-topology.h b/sound/soc/intel/skylake/skl-topology.h index 6d7e0569695f..af198ea0379e 100644 --- a/sound/soc/intel/skylake/skl-topology.h +++ b/sound/soc/intel/skylake/skl-topology.h @@ -512,8 +512,9 @@ int skl_pcm_host_dma_prepare(struct device *dev, int skl_pcm_link_dma_prepare(struct device *dev, struct skl_pipe_params *params); -int skl_dai_load(struct snd_soc_component *cmp, - struct snd_soc_dai_driver *pcm_dai); +int skl_dai_load(struct snd_soc_component *cmp, int index, + struct snd_soc_dai_driver *dai_drv, + struct snd_soc_tplg_pcm *pcm, struct snd_soc_dai *dai); void skl_tplg_add_moduleid_in_bind_params(struct skl *skl, struct snd_soc_dapm_widget *w); #endif diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c index 53f121a50c97..9b33260fd537 100644 --- a/sound/soc/soc-topology.c +++ b/sound/soc/soc-topology.c @@ -259,7 +259,7 @@ static int soc_tplg_vendor_load_(struct soc_tplg *tplg, int ret = 0; if (tplg->comp && tplg->ops && tplg->ops->vendor_load) - ret = tplg->ops->vendor_load(tplg->comp, hdr); + ret = tplg->ops->vendor_load(tplg->comp, tplg->index, hdr); else { dev_err(tplg->dev, "ASoC: no vendor load callback for ID %d\n", hdr->vendor_type); @@ -291,7 +291,8 @@ static int soc_tplg_widget_load(struct soc_tplg *tplg, struct snd_soc_dapm_widget *w, struct snd_soc_tplg_dapm_widget *tplg_w) { if (tplg->comp && tplg->ops && tplg->ops->widget_load) - return tplg->ops->widget_load(tplg->comp, w, tplg_w); + return tplg->ops->widget_load(tplg->comp, tplg->index, w, + tplg_w); return 0; } @@ -302,27 +303,30 @@ static int soc_tplg_widget_ready(struct soc_tplg *tplg, struct snd_soc_dapm_widget *w, struct snd_soc_tplg_dapm_widget *tplg_w) { if (tplg->comp && tplg->ops && tplg->ops->widget_ready) - return tplg->ops->widget_ready(tplg->comp, w, tplg_w); + return tplg->ops->widget_ready(tplg->comp, tplg->index, w, + tplg_w); return 0; } /* pass DAI configurations to component driver for extra initialization */ static int soc_tplg_dai_load(struct soc_tplg *tplg, - struct snd_soc_dai_driver *dai_drv) + struct snd_soc_dai_driver *dai_drv, + struct snd_soc_tplg_pcm *pcm, struct snd_soc_dai *dai) { if (tplg->comp && tplg->ops && tplg->ops->dai_load) - return tplg->ops->dai_load(tplg->comp, dai_drv); + return tplg->ops->dai_load(tplg->comp, tplg->index, dai_drv, + pcm, dai); return 0; } /* pass link configurations to component driver for extra initialization */ static int soc_tplg_dai_link_load(struct soc_tplg *tplg, - struct snd_soc_dai_link *link) + struct snd_soc_dai_link *link, struct snd_soc_tplg_link_config *cfg) { if (tplg->comp && tplg->ops && tplg->ops->link_load) - return tplg->ops->link_load(tplg->comp, link); + return tplg->ops->link_load(tplg->comp, tplg->index, link, cfg); return 0; } @@ -643,7 +647,8 @@ static int soc_tplg_init_kcontrol(struct soc_tplg *tplg, struct snd_kcontrol_new *k, struct snd_soc_tplg_ctl_hdr *hdr) { if (tplg->comp && tplg->ops && tplg->ops->control_load) - return tplg->ops->control_load(tplg->comp, k, hdr); + return tplg->ops->control_load(tplg->comp, tplg->index, k, + hdr); return 0; } @@ -1702,7 +1707,7 @@ static int soc_tplg_dai_create(struct soc_tplg *tplg, dai_drv->compress_new = snd_soc_new_compress; /* pass control to component driver for optional further init */ - ret = soc_tplg_dai_load(tplg, dai_drv); + ret = soc_tplg_dai_load(tplg, dai_drv, pcm, NULL); if (ret < 0) { dev_err(tplg->comp->dev, "ASoC: DAI loading failed\n"); kfree(dai_drv); @@ -1772,7 +1777,7 @@ static int soc_tplg_fe_link_create(struct soc_tplg *tplg, set_link_flags(link, pcm->flag_mask, pcm->flags); /* pass control to component driver for optional further init */ - ret = soc_tplg_dai_link_load(tplg, link); + ret = soc_tplg_dai_link_load(tplg, link, NULL); if (ret < 0) { dev_err(tplg->comp->dev, "ASoC: FE link loading failed\n"); kfree(link); @@ -2080,7 +2085,7 @@ static int soc_tplg_link_config(struct soc_tplg *tplg, set_link_flags(link, cfg->flag_mask, cfg->flags); /* pass control to component driver for optional further init */ - ret = soc_tplg_dai_link_load(tplg, link); + ret = soc_tplg_dai_link_load(tplg, link, cfg); if (ret < 0) { dev_err(tplg->dev, "ASoC: physical link loading failed\n"); return ret; @@ -2202,7 +2207,7 @@ static int soc_tplg_dai_config(struct soc_tplg *tplg, set_dai_flags(dai_drv, d->flag_mask, d->flags); /* pass control to component driver for optional further init */ - ret = soc_tplg_dai_load(tplg, dai_drv); + ret = soc_tplg_dai_load(tplg, dai_drv, NULL, dai); if (ret < 0) { dev_err(tplg->comp->dev, "ASoC: DAI loading failed\n"); return ret; @@ -2311,7 +2316,7 @@ static int soc_tplg_manifest_load(struct soc_tplg *tplg, /* pass control to component driver for optional further init */ if (tplg->comp && tplg->ops && tplg->ops->manifest) - return tplg->ops->manifest(tplg->comp, _manifest); + return tplg->ops->manifest(tplg->comp, tplg->index, _manifest); if (!abi_match) /* free the duplicated one */ kfree(_manifest); -- cgit v1.2.3 From 503e79b793fea5de626db73accf8e8994bc4289d Mon Sep 17 00:00:00 2001 From: Liam Girdwood Date: Thu, 14 Jun 2018 20:53:59 +0100 Subject: ASoC: topology: Add callback for DAPM route load/unload Add a callback fro clients for notification about DAPM route loading and unloading. Signed-off-by: Liam Girdwood Signed-off-by: Mark Brown --- include/sound/soc-topology.h | 7 +++++++ sound/soc/soc-topology.c | 13 +++++++++++++ 2 files changed, 20 insertions(+) diff --git a/include/sound/soc-topology.h b/include/sound/soc-topology.h index e1f265e21ee1..401ef2c45d6c 100644 --- a/include/sound/soc-topology.h +++ b/include/sound/soc-topology.h @@ -32,6 +32,7 @@ struct snd_kcontrol_new; struct snd_soc_dai_link; struct snd_soc_dai_driver; struct snd_soc_dai; +struct snd_soc_dapm_route; /* object scan be loaded and unloaded in groups with identfying indexes */ #define SND_SOC_TPLG_INDEX_ALL 0 /* ID that matches all FW objects */ @@ -116,6 +117,12 @@ struct snd_soc_tplg_ops { int (*control_unload)(struct snd_soc_component *, struct snd_soc_dobj *); + /* DAPM graph route element loading and unloading */ + int (*dapm_route_load)(struct snd_soc_component *, int index, + struct snd_soc_dapm_route *route); + int (*dapm_route_unload)(struct snd_soc_component *, + struct snd_soc_dobj *); + /* external widget init - used for any driver specific init */ int (*widget_load)(struct snd_soc_component *, int index, struct snd_soc_dapm_widget *, diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c index 9b33260fd537..05d177d689e2 100644 --- a/sound/soc/soc-topology.c +++ b/sound/soc/soc-topology.c @@ -1105,6 +1105,17 @@ static int soc_tplg_kcontrol_elems_load(struct soc_tplg *tplg, return 0; } +/* optionally pass new dynamic kcontrol to component driver. */ +static int soc_tplg_add_route(struct soc_tplg *tplg, + struct snd_soc_dapm_route *route) +{ + if (tplg->comp && tplg->ops && tplg->ops->dapm_route_load) + return tplg->ops->dapm_route_load(tplg->comp, tplg->index, + route); + + return 0; +} + static int soc_tplg_dapm_graph_elems_load(struct soc_tplg *tplg, struct snd_soc_tplg_hdr *hdr) { @@ -1153,6 +1164,8 @@ static int soc_tplg_dapm_graph_elems_load(struct soc_tplg *tplg, else route.control = elem->control; + soc_tplg_add_route(tplg, &route); + /* add route, but keep going if some fail */ snd_soc_dapm_add_routes(dapm, &route, 1); } -- cgit v1.2.3 From 134c875bff58ac988c64a1ea2a337acba1711d4b Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 12 Jun 2018 05:56:51 +0000 Subject: ASoC: fsi: convert to SPDX identifiers Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- sound/soc/sh/fsi.c | 22 +++++++++------------- 1 file changed, 9 insertions(+), 13 deletions(-) diff --git a/sound/soc/sh/fsi.c b/sound/soc/sh/fsi.c index 3bae06dd121f..aa7e902f0c02 100644 --- a/sound/soc/sh/fsi.c +++ b/sound/soc/sh/fsi.c @@ -1,16 +1,12 @@ -/* - * Fifo-attached Serial Interface (FSI) support for SH7724 - * - * Copyright (C) 2009 Renesas Solutions Corp. - * Kuninori Morimoto - * - * Based on ssi.c - * Copyright (c) 2007 Manuel Lauss - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Fifo-attached Serial Interface (FSI) support for SH7724 +// +// Copyright (C) 2009 Renesas Solutions Corp. +// Kuninori Morimoto +// +// Based on ssi.c +// Copyright (c) 2007 Manuel Lauss #include #include -- cgit v1.2.3 From cb006e7b1712bb9507a218be7ed811ca8e65fc4d Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 12 Jun 2018 05:57:13 +0000 Subject: ASoC: hac: convert to SPDX identifiers Tidyup incoherence between MODULE_LICENSE and header license, too Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- sound/soc/sh/hac.c | 20 +++++++++----------- 1 file changed, 9 insertions(+), 11 deletions(-) diff --git a/sound/soc/sh/hac.c b/sound/soc/sh/hac.c index 624aaf569fef..c2b496398e6b 100644 --- a/sound/soc/sh/hac.c +++ b/sound/soc/sh/hac.c @@ -1,13 +1,11 @@ -/* - * Hitachi Audio Controller (AC97) support for SH7760/SH7780 - * - * Copyright (c) 2007 Manuel Lauss - * licensed under the terms outlined in the file COPYING at the root - * of the linux kernel sources. - * - * dont forget to set IPSEL/OMSEL register bits (in your board code) to - * enable HAC output pins! - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Hitachi Audio Controller (AC97) support for SH7760/SH7780 +// +// Copyright (c) 2007 Manuel Lauss +// +// dont forget to set IPSEL/OMSEL register bits (in your board code) to +// enable HAC output pins! /* BIG FAT FIXME: although the SH7760 has 2 independent AC97 units, only * the FIRST can be used since ASoC does not pass any information to the @@ -343,6 +341,6 @@ static struct platform_driver hac_pcm_driver = { module_platform_driver(hac_pcm_driver); -MODULE_LICENSE("GPL"); +MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("SuperH onchip HAC (AC97) audio driver"); MODULE_AUTHOR("Manuel Lauss "); -- cgit v1.2.3 From 217bc8c898b24fa2098a375a575f6170cfac45a9 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 12 Jun 2018 05:57:47 +0000 Subject: ASoC: ssi: convert to SPDX identifiers Tidyup incoherence between MODULE_LICENSE and header license, too Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- sound/soc/sh/ssi.c | 21 +++++++++------------ 1 file changed, 9 insertions(+), 12 deletions(-) diff --git a/sound/soc/sh/ssi.c b/sound/soc/sh/ssi.c index 89ed1b107ac5..8125fa3840b6 100644 --- a/sound/soc/sh/ssi.c +++ b/sound/soc/sh/ssi.c @@ -1,14 +1,11 @@ -/* - * Serial Sound Interface (I2S) support for SH7760/SH7780 - * - * Copyright (c) 2007 Manuel Lauss - * - * licensed under the terms outlined in the file COPYING at the root - * of the linux kernel sources. - * - * dont forget to set IPSEL/OMSEL register bits (in your board code) to - * enable SSI output pins! - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Serial Sound Interface (I2S) support for SH7760/SH7780 +// +// Copyright (c) 2007 Manuel Lauss +// +// dont forget to set IPSEL/OMSEL register bits (in your board code) to +// enable SSI output pins! /* * LIMITATIONS: @@ -400,6 +397,6 @@ static struct platform_driver sh4_ssi_driver = { module_platform_driver(sh4_ssi_driver); -MODULE_LICENSE("GPL"); +MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("SuperH onchip SSI (I2S) audio driver"); MODULE_AUTHOR("Manuel Lauss "); -- cgit v1.2.3 From 4e6fdaf1bd334e7e3ad9d6ef7aef4a433c770952 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 12 Jun 2018 05:58:07 +0000 Subject: ASoC: siu: convert to SPDX identifiers Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- sound/soc/sh/siu.h | 26 ++++++-------------------- sound/soc/sh/siu_dai.c | 26 ++++++-------------------- sound/soc/sh/siu_pcm.c | 27 +++++++-------------------- 3 files changed, 19 insertions(+), 60 deletions(-) diff --git a/sound/soc/sh/siu.h b/sound/soc/sh/siu.h index 6088d627c0e4..63a508fdfe78 100644 --- a/sound/soc/sh/siu.h +++ b/sound/soc/sh/siu.h @@ -1,23 +1,9 @@ -/* - * siu.h - ALSA SoC driver for Renesas SH7343, SH7722 SIU peripheral. - * - * Copyright (C) 2009-2010 Guennadi Liakhovetski - * Copyright (C) 2006 Carlos Munoz - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// siu.h - ALSA SoC driver for Renesas SH7343, SH7722 SIU peripheral. +// +// Copyright (C) 2009-2010 Guennadi Liakhovetski +// Copyright (C) 2006 Carlos Munoz #ifndef SIU_H #define SIU_H diff --git a/sound/soc/sh/siu_dai.c b/sound/soc/sh/siu_dai.c index ee2211635e92..f2a386fcd92e 100644 --- a/sound/soc/sh/siu_dai.c +++ b/sound/soc/sh/siu_dai.c @@ -1,23 +1,9 @@ -/* - * siu_dai.c - ALSA SoC driver for Renesas SH7343, SH7722 SIU peripheral. - * - * Copyright (C) 2009-2010 Guennadi Liakhovetski - * Copyright (C) 2006 Carlos Munoz - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// siu_dai.c - ALSA SoC driver for Renesas SH7343, SH7722 SIU peripheral. +// +// Copyright (C) 2009-2010 Guennadi Liakhovetski +// Copyright (C) 2006 Carlos Munoz #include #include diff --git a/sound/soc/sh/siu_pcm.c b/sound/soc/sh/siu_pcm.c index 172909570ed5..e263757e4a69 100644 --- a/sound/soc/sh/siu_pcm.c +++ b/sound/soc/sh/siu_pcm.c @@ -1,23 +1,10 @@ -/* - * siu_pcm.c - ALSA driver for Renesas SH7343, SH7722 SIU peripheral. - * - * Copyright (C) 2009-2010 Guennadi Liakhovetski - * Copyright (C) 2006 Carlos Munoz - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// siu_pcm.c - ALSA driver for Renesas SH7343, SH7722 SIU peripheral. +// +// Copyright (C) 2009-2010 Guennadi Liakhovetski +// Copyright (C) 2006 Carlos Munoz + #include #include #include -- cgit v1.2.3 From 1e0edd4deadbbacd3b35179c233efa26624ab2af Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 12 Jun 2018 05:58:38 +0000 Subject: ASoC: rsnd: convert to SPDX identifiers Tidyup incoherence between MODULE_LICENSE and header license, too Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- sound/soc/sh/rcar/Makefile | 1 + sound/soc/sh/rcar/adg.c | 15 ++++++--------- sound/soc/sh/rcar/cmd.c | 17 +++++++---------- sound/soc/sh/rcar/core.c | 24 ++++++++++-------------- sound/soc/sh/rcar/ctu.c | 15 ++++++--------- sound/soc/sh/rcar/dma.c | 17 +++++++---------- sound/soc/sh/rcar/dvc.c | 16 ++++++---------- sound/soc/sh/rcar/gen.c | 16 ++++++---------- sound/soc/sh/rcar/mix.c | 14 +++++--------- sound/soc/sh/rcar/rsnd.h | 17 +++++++---------- sound/soc/sh/rcar/src.c | 16 ++++++---------- sound/soc/sh/rcar/ssi.c | 22 +++++++++------------- sound/soc/sh/rcar/ssiu.c | 15 ++++++--------- 13 files changed, 82 insertions(+), 123 deletions(-) diff --git a/sound/soc/sh/rcar/Makefile b/sound/soc/sh/rcar/Makefile index 9c3d5aed99d1..5d1ff8ef26f9 100644 --- a/sound/soc/sh/rcar/Makefile +++ b/sound/soc/sh/rcar/Makefile @@ -1,2 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0 snd-soc-rcar-objs := core.o gen.o dma.o adg.o ssi.o ssiu.o src.o ctu.o mix.o dvc.o cmd.o obj-$(CONFIG_SND_SOC_RCAR) += snd-soc-rcar.o diff --git a/sound/soc/sh/rcar/adg.c b/sound/soc/sh/rcar/adg.c index 4672688cac32..3a3064dda57f 100644 --- a/sound/soc/sh/rcar/adg.c +++ b/sound/soc/sh/rcar/adg.c @@ -1,12 +1,9 @@ -/* - * Helper routines for R-Car sound ADG. - * - * Copyright (C) 2013 Kuninori Morimoto - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Helper routines for R-Car sound ADG. +// +// Copyright (C) 2013 Kuninori Morimoto + #include #include "rsnd.h" diff --git a/sound/soc/sh/rcar/cmd.c b/sound/soc/sh/rcar/cmd.c index 5900fb535a2b..d8043ad33540 100644 --- a/sound/soc/sh/rcar/cmd.c +++ b/sound/soc/sh/rcar/cmd.c @@ -1,13 +1,10 @@ -/* - * Renesas R-Car CMD support - * - * Copyright (C) 2015 Renesas Solutions Corp. - * Kuninori Morimoto - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Renesas R-Car CMD support +// +// Copyright (C) 2015 Renesas Solutions Corp. +// Kuninori Morimoto + #include "rsnd.h" struct rsnd_cmd { diff --git a/sound/soc/sh/rcar/core.c b/sound/soc/sh/rcar/core.c index f237002180c0..eac22fef4543 100644 --- a/sound/soc/sh/rcar/core.c +++ b/sound/soc/sh/rcar/core.c @@ -1,16 +1,12 @@ -/* - * Renesas R-Car SRU/SCU/SSIU/SSI support - * - * Copyright (C) 2013 Renesas Solutions Corp. - * Kuninori Morimoto - * - * Based on fsi.c - * Kuninori Morimoto - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Renesas R-Car SRU/SCU/SSIU/SSI support +// +// Copyright (C) 2013 Renesas Solutions Corp. +// Kuninori Morimoto +// +// Based on fsi.c +// Kuninori Morimoto /* * Renesas R-Car sound device structure @@ -1606,7 +1602,7 @@ static struct platform_driver rsnd_driver = { }; module_platform_driver(rsnd_driver); -MODULE_LICENSE("GPL"); +MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("Renesas R-Car audio driver"); MODULE_AUTHOR("Kuninori Morimoto "); MODULE_ALIAS("platform:rcar-pcm-audio"); diff --git a/sound/soc/sh/rcar/ctu.c b/sound/soc/sh/rcar/ctu.c index 83be7d3ae0a8..6a55aa753003 100644 --- a/sound/soc/sh/rcar/ctu.c +++ b/sound/soc/sh/rcar/ctu.c @@ -1,12 +1,9 @@ -/* - * ctu.c - * - * Copyright (c) 2015 Kuninori Morimoto - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// ctu.c +// +// Copyright (c) 2015 Kuninori Morimoto + #include "rsnd.h" #define CTU_NAME_SIZE 16 diff --git a/sound/soc/sh/rcar/dma.c b/sound/soc/sh/rcar/dma.c index ef82b94d038b..fe63ef8600d0 100644 --- a/sound/soc/sh/rcar/dma.c +++ b/sound/soc/sh/rcar/dma.c @@ -1,13 +1,10 @@ -/* - * Renesas R-Car Audio DMAC support - * - * Copyright (C) 2015 Renesas Electronics Corp. - * Copyright (c) 2015 Kuninori Morimoto - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Renesas R-Car Audio DMAC support +// +// Copyright (C) 2015 Renesas Electronics Corp. +// Copyright (c) 2015 Kuninori Morimoto + #include #include #include "rsnd.h" diff --git a/sound/soc/sh/rcar/dvc.c b/sound/soc/sh/rcar/dvc.c index ca1780e0b830..2b16e0ce6bc5 100644 --- a/sound/soc/sh/rcar/dvc.c +++ b/sound/soc/sh/rcar/dvc.c @@ -1,13 +1,9 @@ -/* - * Renesas R-Car DVC support - * - * Copyright (C) 2014 Renesas Solutions Corp. - * Kuninori Morimoto - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Renesas R-Car DVC support +// +// Copyright (C) 2014 Renesas Solutions Corp. +// Kuninori Morimoto /* * Playback Volume diff --git a/sound/soc/sh/rcar/gen.c b/sound/soc/sh/rcar/gen.c index 25642e92dae0..0230301fe078 100644 --- a/sound/soc/sh/rcar/gen.c +++ b/sound/soc/sh/rcar/gen.c @@ -1,13 +1,9 @@ -/* - * Renesas R-Car Gen1 SRU/SSI support - * - * Copyright (C) 2013 Renesas Solutions Corp. - * Kuninori Morimoto - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Renesas R-Car Gen1 SRU/SSI support +// +// Copyright (C) 2013 Renesas Solutions Corp. +// Kuninori Morimoto /* * #define DEBUG diff --git a/sound/soc/sh/rcar/mix.c b/sound/soc/sh/rcar/mix.c index 1881b2de9126..8e3b57eaa708 100644 --- a/sound/soc/sh/rcar/mix.c +++ b/sound/soc/sh/rcar/mix.c @@ -1,12 +1,8 @@ -/* - * mix.c - * - * Copyright (c) 2015 Kuninori Morimoto - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// mix.c +// +// Copyright (c) 2015 Kuninori Morimoto /* * CTUn MIXn diff --git a/sound/soc/sh/rcar/rsnd.h b/sound/soc/sh/rcar/rsnd.h index 6d7280d2d9be..96d93330b1e1 100644 --- a/sound/soc/sh/rcar/rsnd.h +++ b/sound/soc/sh/rcar/rsnd.h @@ -1,13 +1,10 @@ -/* - * Renesas R-Car - * - * Copyright (C) 2013 Renesas Solutions Corp. - * Kuninori Morimoto - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Renesas R-Car +// +// Copyright (C) 2013 Renesas Solutions Corp. +// Kuninori Morimoto + #ifndef RSND_H #define RSND_H diff --git a/sound/soc/sh/rcar/src.c b/sound/soc/sh/rcar/src.c index 6c72d1a81cf5..beccfbac7581 100644 --- a/sound/soc/sh/rcar/src.c +++ b/sound/soc/sh/rcar/src.c @@ -1,13 +1,9 @@ -/* - * Renesas R-Car SRC support - * - * Copyright (C) 2013 Renesas Solutions Corp. - * Kuninori Morimoto - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Renesas R-Car SRC support +// +// Copyright (C) 2013 Renesas Solutions Corp. +// Kuninori Morimoto /* * you can enable below define if you don't need diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c index 6e1166ec24a0..3d9ea100a64f 100644 --- a/sound/soc/sh/rcar/ssi.c +++ b/sound/soc/sh/rcar/ssi.c @@ -1,16 +1,12 @@ -/* - * Renesas R-Car SSIU/SSI support - * - * Copyright (C) 2013 Renesas Solutions Corp. - * Kuninori Morimoto - * - * Based on fsi.c - * Kuninori Morimoto - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Renesas R-Car SSIU/SSI support +// +// Copyright (C) 2013 Renesas Solutions Corp. +// Kuninori Morimoto +// +// Based on fsi.c +// Kuninori Morimoto /* * you can enable below define if you don't need diff --git a/sound/soc/sh/rcar/ssiu.c b/sound/soc/sh/rcar/ssiu.c index 47bdba9fc582..016fbf5ac242 100644 --- a/sound/soc/sh/rcar/ssiu.c +++ b/sound/soc/sh/rcar/ssiu.c @@ -1,12 +1,9 @@ -/* - * Renesas R-Car SSIU support - * - * Copyright (c) 2015 Kuninori Morimoto - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Renesas R-Car SSIU support +// +// Copyright (c) 2015 Kuninori Morimoto + #include "rsnd.h" #define SSIU_NAME "ssiu" -- cgit v1.2.3 From 0026c551bacd9654eaa6ee8e4aa19d52730e74f4 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 12 Jun 2018 05:58:54 +0000 Subject: ASoC: migor: convert to SPDX identifiers Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- sound/soc/sh/migor.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) diff --git a/sound/soc/sh/migor.c b/sound/soc/sh/migor.c index ecb057ff9fbb..8739c9f60672 100644 --- a/sound/soc/sh/migor.c +++ b/sound/soc/sh/migor.c @@ -1,12 +1,8 @@ -/* - * ALSA SoC driver for Migo-R - * - * Copyright (C) 2009-2010 Guennadi Liakhovetski - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// ALSA SoC driver for Migo-R +// +// Copyright (C) 2009-2010 Guennadi Liakhovetski #include #include -- cgit v1.2.3 From ddfe227c0cbfb97b37afe123e014b9bc4df217b5 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 12 Jun 2018 05:59:11 +0000 Subject: ASoC: dma-sh7760: convert to SPDX identifiers Tidyup incoherence between MODULE_LICENSE and header license, too Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- sound/soc/sh/dma-sh7760.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/sound/soc/sh/dma-sh7760.c b/sound/soc/sh/dma-sh7760.c index 2dc3b762fdd9..922fb6aa3ed1 100644 --- a/sound/soc/sh/dma-sh7760.c +++ b/sound/soc/sh/dma-sh7760.c @@ -1,16 +1,14 @@ -/* - * SH7760 ("camelot") DMABRG audio DMA unit support - * - * Copyright (C) 2007 Manuel Lauss - * licensed under the terms outlined in the file COPYING at the root - * of the linux kernel sources. - * - * The SH7760 DMABRG provides 4 dma channels (2x rec, 2x play), which - * trigger an interrupt when one half of the programmed transfer size - * has been xmitted. - * - * FIXME: little-endian only for now - */ +// SPDX-License-Identifier: GPL-2.0 +// +// SH7760 ("camelot") DMABRG audio DMA unit support +// +// Copyright (C) 2007 Manuel Lauss +// +// The SH7760 DMABRG provides 4 dma channels (2x rec, 2x play), which +// trigger an interrupt when one half of the programmed transfer size +// has been xmitted. +// +// FIXME: little-endian only for now #include #include @@ -341,6 +339,6 @@ static struct platform_driver sh7760_pcm_driver = { module_platform_driver(sh7760_pcm_driver); -MODULE_LICENSE("GPL"); +MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("SH7760 Audio DMA (DMABRG) driver"); MODULE_AUTHOR("Manuel Lauss "); -- cgit v1.2.3 From 04433977b164c8ed0b65cd023c87c74da0fff2bf Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 12 Jun 2018 05:59:27 +0000 Subject: ASoC: sh7760-ac97: convert to SPDX identifiers Tidyup incoherence between MODULE_LICENSE and header license, too Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- sound/soc/sh/sh7760-ac97.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/sound/soc/sh/sh7760-ac97.c b/sound/soc/sh/sh7760-ac97.c index 4a3568a9bf59..4bb4c13cf860 100644 --- a/sound/soc/sh/sh7760-ac97.c +++ b/sound/soc/sh/sh7760-ac97.c @@ -1,10 +1,8 @@ -/* - * Generic AC97 sound support for SH7760 - * - * (c) 2007 Manuel Lauss - * - * Licensed under the GPLv2. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Generic AC97 sound support for SH7760 +// +// (c) 2007 Manuel Lauss #include #include @@ -68,6 +66,6 @@ static void __exit sh7760_ac97_exit(void) module_init(sh7760_ac97_init); module_exit(sh7760_ac97_exit); -MODULE_LICENSE("GPL"); +MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("Generic SH7760 AC97 sound machine"); MODULE_AUTHOR("Manuel Lauss "); -- cgit v1.2.3 From 7cc90a5cadb1733d95d3c2bc147cbcf7843aa585 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 12 Jun 2018 05:52:00 +0000 Subject: ASoC: rsnd: has .symmetric_rates if SSIs are sharing WS pin If SSIs are sharing WS pin, it should has .symmetric_rates. This patch sets it. Signed-off-by: Kuninori Morimoto Tested-by: Hiroyuki Yokoyama Signed-off-by: Mark Brown --- sound/soc/sh/rcar/core.c | 6 ++++++ sound/soc/sh/rcar/ssi.c | 5 +++-- 2 files changed, 9 insertions(+), 2 deletions(-) diff --git a/sound/soc/sh/rcar/core.c b/sound/soc/sh/rcar/core.c index af04d41a4274..6bbdddef426e 100644 --- a/sound/soc/sh/rcar/core.c +++ b/sound/soc/sh/rcar/core.c @@ -1085,6 +1085,12 @@ static void __rsnd_dai_probe(struct rsnd_priv *priv, of_node_put(capture); } + if (rsnd_ssi_is_pin_sharing(io_capture) || + rsnd_ssi_is_pin_sharing(io_playback)) { + /* should have symmetric_rates if pin sharing */ + drv->symmetric_rates = 1; + } + dev_dbg(dev, "%s (%s/%s)\n", rdai->name, rsnd_io_to_mod_ssi(io_playback) ? "play" : " -- ", rsnd_io_to_mod_ssi(io_capture) ? "capture" : " -- "); diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c index 9538f76f8e20..4e605648918b 100644 --- a/sound/soc/sh/rcar/ssi.c +++ b/sound/soc/sh/rcar/ssi.c @@ -1055,9 +1055,10 @@ struct rsnd_mod *rsnd_ssi_mod_get(struct rsnd_priv *priv, int id) int __rsnd_ssi_is_pin_sharing(struct rsnd_mod *mod) { - struct rsnd_ssi *ssi = rsnd_mod_to_ssi(mod); + if (!mod) + return 0; - return !!(rsnd_flags_has(ssi, RSND_SSI_CLK_PIN_SHARE)); + return !!(rsnd_flags_has(rsnd_mod_to_ssi(mod), RSND_SSI_CLK_PIN_SHARE)); } static u32 *rsnd_ssi_get_status(struct rsnd_dai_stream *io, -- cgit v1.2.3 From 203cdf51f28820bee7893b4be392847418e6f4ec Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 12 Jun 2018 05:52:17 +0000 Subject: ASoC: rsnd: SSI parent cares SWSP bit SSICR has SWSP bit (= Serial WS Polarity) which decides WS pin 1st channel polarity (low or hi). This bit shouldn't exchange after running. Current SSI "parent" doesn't care SSICR, just controls clock only. Because of this behavior, if platform uses SSI0 as playback, SSI1 as capture, and if user starts capture -> playback order, SSI0 SSICR::SWSP bit exchanged 0 -> 1 during captureing, and it makes capture noise. This patch cares SSICR on SSI parent, too. Special thanks to Yokoyama-san Reported-by: Hiroyuki Yokoyama Signed-off-by: Kuninori Morimoto Tested-by: Hiroyuki Yokoyama Signed-off-by: Mark Brown --- sound/soc/sh/rcar/ssi.c | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c index 4e605648918b..98dd120d830a 100644 --- a/sound/soc/sh/rcar/ssi.c +++ b/sound/soc/sh/rcar/ssi.c @@ -37,6 +37,7 @@ #define CHNL_4 (1 << 22) /* Channels */ #define CHNL_6 (2 << 22) /* Channels */ #define CHNL_8 (3 << 22) /* Channels */ +#define DWL_MASK (7 << 19) /* Data Word Length mask */ #define DWL_8 (0 << 19) /* Data Word Length */ #define DWL_16 (1 << 19) /* Data Word Length */ #define DWL_18 (2 << 19) /* Data Word Length */ @@ -353,21 +354,18 @@ static void rsnd_ssi_config_init(struct rsnd_mod *mod, struct rsnd_dai *rdai = rsnd_io_to_rdai(io); struct snd_pcm_runtime *runtime = rsnd_io_to_runtime(io); struct rsnd_ssi *ssi = rsnd_mod_to_ssi(mod); - u32 cr_own; - u32 cr_mode; - u32 wsr; + u32 cr_own = ssi->cr_own; + u32 cr_mode = ssi->cr_mode; + u32 wsr = ssi->wsr; int is_tdm; - if (rsnd_ssi_is_parent(mod, io)) - return; - is_tdm = rsnd_runtime_is_ssi_tdm(io); /* * always use 32bit system word. * see also rsnd_ssi_master_clk_enable() */ - cr_own = FORCE | SWL_32; + cr_own |= FORCE | SWL_32; if (rdai->bit_clk_inv) cr_own |= SCKP; @@ -377,9 +375,18 @@ static void rsnd_ssi_config_init(struct rsnd_mod *mod, cr_own |= SDTA; if (rdai->sys_delay) cr_own |= DEL; + + /* + * We shouldn't exchange SWSP after running. + * This means, parent needs to care it. + */ + if (rsnd_ssi_is_parent(mod, io)) + goto init_end; + if (rsnd_io_is_play(io)) cr_own |= TRMD; + cr_own &= ~DWL_MASK; switch (snd_pcm_format_width(runtime->format)) { case 16: cr_own |= DWL_16; @@ -406,7 +413,7 @@ static void rsnd_ssi_config_init(struct rsnd_mod *mod, wsr |= WS_MODE; cr_own |= CHNL_8; } - +init_end: ssi->cr_own = cr_own; ssi->cr_mode = cr_mode; ssi->wsr = wsr; @@ -470,15 +477,18 @@ static int rsnd_ssi_quit(struct rsnd_mod *mod, return -EIO; } - if (!rsnd_ssi_is_parent(mod, io)) - ssi->cr_own = 0; - rsnd_ssi_master_clk_stop(mod, io); rsnd_mod_power_off(mod); ssi->usrcnt--; + if (!ssi->usrcnt) { + ssi->cr_own = 0; + ssi->cr_mode = 0; + ssi->wsr = 0; + } + return 0; } -- cgit v1.2.3 From 6e56e5d04191aa20e08430dcb203c081fa247e93 Mon Sep 17 00:00:00 2001 From: "Agrawal, Akshu" Date: Thu, 7 Jun 2018 14:48:43 +0800 Subject: ASoC: AMD: Add NULL pointer check Fix crash in those platforms whose machine driver does not expose platform_info. For those platforms we rely on default value and select I2SSP channel. Signed-off-by: Akshu Agrawal Signed-off-by: Mark Brown --- sound/soc/amd/acp-pcm-dma.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/soc/amd/acp-pcm-dma.c b/sound/soc/amd/acp-pcm-dma.c index 77203841c535..1458b5048498 100644 --- a/sound/soc/amd/acp-pcm-dma.c +++ b/sound/soc/amd/acp-pcm-dma.c @@ -773,7 +773,8 @@ static int acp_dma_hw_params(struct snd_pcm_substream *substream, if (WARN_ON(!rtd)) return -EINVAL; - rtd->i2s_instance = pinfo->i2s_instance; + if (pinfo) + rtd->i2s_instance = pinfo->i2s_instance; if (adata->asic_type == CHIP_STONEY) { val = acp_reg_read(adata->acp_mmio, mmACP_I2S_16BIT_RESOLUTION_EN); -- cgit v1.2.3 From 187e01d0d56d1fd682dfaafb0b45d332abec6387 Mon Sep 17 00:00:00 2001 From: olivier moysan Date: Mon, 11 Jun 2018 17:13:59 +0200 Subject: ASoC: stm32: sai: add iec958 controls support Add support of iec958 controls for STM32 SAI. Signed-off-by: Olivier Moysan Signed-off-by: Mark Brown --- sound/soc/stm/Kconfig | 1 + sound/soc/stm/stm32_sai_sub.c | 139 ++++++++++++++++++++++++++++++++++++++---- 2 files changed, 128 insertions(+), 12 deletions(-) diff --git a/sound/soc/stm/Kconfig b/sound/soc/stm/Kconfig index 48f9ddd94016..9b2681397dba 100644 --- a/sound/soc/stm/Kconfig +++ b/sound/soc/stm/Kconfig @@ -6,6 +6,7 @@ config SND_SOC_STM32_SAI depends on SND_SOC select SND_SOC_GENERIC_DMAENGINE_PCM select REGMAP_MMIO + select SND_PCM_IEC958 help Say Y if you want to enable SAI for STM32 diff --git a/sound/soc/stm/stm32_sai_sub.c b/sound/soc/stm/stm32_sai_sub.c index cfeb219e1d78..c4f15ea14197 100644 --- a/sound/soc/stm/stm32_sai_sub.c +++ b/sound/soc/stm/stm32_sai_sub.c @@ -96,7 +96,8 @@ * @slot_mask: rx or tx active slots mask. set at init or at runtime * @data_size: PCM data width. corresponds to PCM substream width. * @spdif_frm_cnt: S/PDIF playback frame counter - * @spdif_status_bits: S/PDIF status bits + * @snd_aes_iec958: iec958 data + * @ctrl_lock: control lock */ struct stm32_sai_sub_data { struct platform_device *pdev; @@ -125,7 +126,8 @@ struct stm32_sai_sub_data { int slot_mask; int data_size; unsigned int spdif_frm_cnt; - unsigned char spdif_status_bits[SAI_IEC60958_STATUS_BYTES]; + struct snd_aes_iec958 iec958; + struct mutex ctrl_lock; /* protect resources accessed by controls */ }; enum stm32_sai_fifo_th { @@ -184,10 +186,6 @@ static bool stm32_sai_sub_writeable_reg(struct device *dev, unsigned int reg) } } -static const unsigned char default_status_bits[SAI_IEC60958_STATUS_BYTES] = { - 0, 0, 0, IEC958_AES3_CON_FS_48000, -}; - static const struct regmap_config stm32_sai_sub_regmap_config_f4 = { .reg_bits = 32, .reg_stride = 4, @@ -210,6 +208,49 @@ static const struct regmap_config stm32_sai_sub_regmap_config_h7 = { .fast_io = true, }; +static int snd_pcm_iec958_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958; + uinfo->count = 1; + + return 0; +} + +static int snd_pcm_iec958_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *uctl) +{ + struct stm32_sai_sub_data *sai = snd_kcontrol_chip(kcontrol); + + mutex_lock(&sai->ctrl_lock); + memcpy(uctl->value.iec958.status, sai->iec958.status, 4); + mutex_unlock(&sai->ctrl_lock); + + return 0; +} + +static int snd_pcm_iec958_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *uctl) +{ + struct stm32_sai_sub_data *sai = snd_kcontrol_chip(kcontrol); + + mutex_lock(&sai->ctrl_lock); + memcpy(sai->iec958.status, uctl->value.iec958.status, 4); + mutex_unlock(&sai->ctrl_lock); + + return 0; +} + +static const struct snd_kcontrol_new iec958_ctls = { + .access = (SNDRV_CTL_ELEM_ACCESS_READWRITE | + SNDRV_CTL_ELEM_ACCESS_VOLATILE), + .iface = SNDRV_CTL_ELEM_IFACE_PCM, + .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, DEFAULT), + .info = snd_pcm_iec958_info, + .get = snd_pcm_iec958_get, + .put = snd_pcm_iec958_put, +}; + static irqreturn_t stm32_sai_isr(int irq, void *devid) { struct stm32_sai_sub_data *sai = (struct stm32_sai_sub_data *)devid; @@ -619,6 +660,59 @@ static void stm32_sai_set_frame(struct snd_soc_dai *cpu_dai) } } +static void stm32_sai_init_iec958_status(struct stm32_sai_sub_data *sai) +{ + unsigned char *cs = sai->iec958.status; + + cs[0] = IEC958_AES0_CON_NOT_COPYRIGHT | IEC958_AES0_CON_EMPHASIS_NONE; + cs[1] = IEC958_AES1_CON_GENERAL; + cs[2] = IEC958_AES2_CON_SOURCE_UNSPEC | IEC958_AES2_CON_CHANNEL_UNSPEC; + cs[3] = IEC958_AES3_CON_CLOCK_1000PPM | IEC958_AES3_CON_FS_NOTID; +} + +static void stm32_sai_set_iec958_status(struct stm32_sai_sub_data *sai, + struct snd_pcm_runtime *runtime) +{ + if (!runtime) + return; + + /* Force the sample rate according to runtime rate */ + mutex_lock(&sai->ctrl_lock); + switch (runtime->rate) { + case 22050: + sai->iec958.status[3] = IEC958_AES3_CON_FS_22050; + break; + case 44100: + sai->iec958.status[3] = IEC958_AES3_CON_FS_44100; + break; + case 88200: + sai->iec958.status[3] = IEC958_AES3_CON_FS_88200; + break; + case 176400: + sai->iec958.status[3] = IEC958_AES3_CON_FS_176400; + break; + case 24000: + sai->iec958.status[3] = IEC958_AES3_CON_FS_24000; + break; + case 48000: + sai->iec958.status[3] = IEC958_AES3_CON_FS_48000; + break; + case 96000: + sai->iec958.status[3] = IEC958_AES3_CON_FS_96000; + break; + case 192000: + sai->iec958.status[3] = IEC958_AES3_CON_FS_192000; + break; + case 32000: + sai->iec958.status[3] = IEC958_AES3_CON_FS_32000; + break; + default: + sai->iec958.status[3] = IEC958_AES3_CON_FS_NOTID; + break; + } + mutex_unlock(&sai->ctrl_lock); +} + static int stm32_sai_configure_clock(struct snd_soc_dai *cpu_dai, struct snd_pcm_hw_params *params) { @@ -709,7 +803,11 @@ static int stm32_sai_hw_params(struct snd_pcm_substream *substream, sai->data_size = params_width(params); - if (!STM_SAI_PROTOCOL_IS_SPDIF(sai)) { + if (STM_SAI_PROTOCOL_IS_SPDIF(sai)) { + /* Rate not already set in runtime structure */ + substream->runtime->rate = params_rate(params); + stm32_sai_set_iec958_status(sai, substream->runtime); + } else { ret = stm32_sai_set_slots(cpu_dai); if (ret < 0) return ret; @@ -789,6 +887,20 @@ static void stm32_sai_shutdown(struct snd_pcm_substream *substream, sai->substream = NULL; } +static int stm32_sai_pcm_new(struct snd_soc_pcm_runtime *rtd, + struct snd_soc_dai *cpu_dai) +{ + struct stm32_sai_sub_data *sai = dev_get_drvdata(cpu_dai->dev); + + if (STM_SAI_PROTOCOL_IS_SPDIF(sai)) { + dev_dbg(&sai->pdev->dev, "%s: register iec controls", __func__); + return snd_ctl_add(rtd->pcm->card, + snd_ctl_new1(&iec958_ctls, sai)); + } + + return 0; +} + static int stm32_sai_dai_probe(struct snd_soc_dai *cpu_dai) { struct stm32_sai_sub_data *sai = dev_get_drvdata(cpu_dai->dev); @@ -809,6 +921,10 @@ static int stm32_sai_dai_probe(struct snd_soc_dai *cpu_dai) else snd_soc_dai_init_dma_data(cpu_dai, NULL, &sai->dma_params); + /* Next settings are not relevant for spdif mode */ + if (STM_SAI_PROTOCOL_IS_SPDIF(sai)) + return 0; + cr1_mask = SAI_XCR1_RX_TX; if (STM_SAI_IS_CAPTURE(sai)) cr1 |= SAI_XCR1_RX_TX; @@ -820,10 +936,6 @@ static int stm32_sai_dai_probe(struct snd_soc_dai *cpu_dai) sai->synco, sai->synci); } - if (STM_SAI_PROTOCOL_IS_SPDIF(sai)) - memcpy(sai->spdif_status_bits, default_status_bits, - sizeof(default_status_bits)); - cr1_mask |= SAI_XCR1_SYNCEN_MASK; cr1 |= SAI_XCR1_SYNCEN_SET(sai->sync); @@ -861,7 +973,7 @@ static int stm32_sai_pcm_process_spdif(struct snd_pcm_substream *substream, /* Set channel status bit */ byte = frm_cnt >> 3; mask = 1 << (frm_cnt - (byte << 3)); - if (sai->spdif_status_bits[byte] & mask) + if (sai->iec958.status[byte] & mask) *ptr |= 0x04000000; ptr++; @@ -888,6 +1000,7 @@ static const struct snd_pcm_hardware stm32_sai_pcm_hw = { static struct snd_soc_dai_driver stm32_sai_playback_dai[] = { { .probe = stm32_sai_dai_probe, + .pcm_new = stm32_sai_pcm_new, .id = 1, /* avoid call to fmt_single_name() */ .playback = { .channels_min = 1, @@ -998,6 +1111,7 @@ static int stm32_sai_sub_parse_of(struct platform_device *pdev, dev_err(&pdev->dev, "S/PDIF IEC60958 not supported\n"); return -EINVAL; } + stm32_sai_init_iec958_status(sai); sai->spdif = true; sai->master = true; } @@ -1114,6 +1228,7 @@ static int stm32_sai_sub_probe(struct platform_device *pdev) sai->id = (uintptr_t)of_id->data; sai->pdev = pdev; + mutex_init(&sai->ctrl_lock); platform_set_drvdata(pdev, sai); sai->pdata = dev_get_drvdata(pdev->dev.parent); -- cgit v1.2.3 From a56df73ba5960848f60f609c68770d2638bf1dd5 Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Sun, 10 Jun 2018 01:20:54 +0300 Subject: ASoC: rockchip: put device_node on remove snd_rk_mc_probe() gets a couple of device nodes with of_parse_phandle(), but there is no release of them. The patch adds remove handler and proper error handling in the probe. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Signed-off-by: Mark Brown --- sound/soc/rockchip/rockchip_rt5645.c | 27 ++++++++++++++++++++++++--- 1 file changed, 24 insertions(+), 3 deletions(-) diff --git a/sound/soc/rockchip/rockchip_rt5645.c b/sound/soc/rockchip/rockchip_rt5645.c index 4db4fd56db35..881c32498808 100644 --- a/sound/soc/rockchip/rockchip_rt5645.c +++ b/sound/soc/rockchip/rockchip_rt5645.c @@ -181,7 +181,8 @@ static int snd_rk_mc_probe(struct platform_device *pdev) if (!rk_dailink.cpu_of_node) { dev_err(&pdev->dev, "Property 'rockchip,i2s-controller' missing or invalid\n"); - return -EINVAL; + ret = -EINVAL; + goto put_codec_of_node; } rk_dailink.platform_of_node = rk_dailink.cpu_of_node; @@ -190,17 +191,36 @@ static int snd_rk_mc_probe(struct platform_device *pdev) if (ret) { dev_err(&pdev->dev, "Soc parse card name failed %d\n", ret); - return ret; + goto put_cpu_of_node; } ret = devm_snd_soc_register_card(&pdev->dev, card); if (ret) { dev_err(&pdev->dev, "Soc register card failed %d\n", ret); - return ret; + goto put_cpu_of_node; } return ret; + +put_cpu_of_node: + of_node_put(rk_dailink.cpu_of_node); + rk_dailink.cpu_of_node = NULL; +put_codec_of_node: + of_node_put(rk_dailink.codec_of_node); + rk_dailink.codec_of_node = NULL; + + return ret; +} + +static int snd_rk_mc_remove(struct platform_device *pdev) +{ + of_node_put(rk_dailink.cpu_of_node); + rk_dailink.cpu_of_node = NULL; + of_node_put(rk_dailink.codec_of_node); + rk_dailink.codec_of_node = NULL; + + return 0; } static const struct of_device_id rockchip_rt5645_of_match[] = { @@ -212,6 +232,7 @@ MODULE_DEVICE_TABLE(of, rockchip_rt5645_of_match); static struct platform_driver snd_rk_mc_driver = { .probe = snd_rk_mc_probe, + .remove = snd_rk_mc_remove, .driver = { .name = DRV_NAME, .pm = &snd_soc_pm_ops, -- cgit v1.2.3 From 75b31192fe6ad20b42276b20ee3bdf1493216d63 Mon Sep 17 00:00:00 2001 From: Jianqun Xu Date: Fri, 8 Jun 2018 16:31:09 +0800 Subject: ASoC: rockchip: add config for rockchip dmaengine pcm register This patch makes the rockchip i2s pcm configurable by adding rockchip pcm config for devm_snd_dmaengine_pcm_register. Signed-off-by: Jianqun Xu Signed-off-by: Mark Brown --- sound/soc/rockchip/Makefile | 3 ++- sound/soc/rockchip/rockchip_i2s.c | 3 ++- sound/soc/rockchip/rockchip_pcm.c | 45 +++++++++++++++++++++++++++++++++++++++ sound/soc/rockchip/rockchip_pcm.h | 14 ++++++++++++ 4 files changed, 63 insertions(+), 2 deletions(-) create mode 100644 sound/soc/rockchip/rockchip_pcm.c create mode 100644 sound/soc/rockchip/rockchip_pcm.h diff --git a/sound/soc/rockchip/Makefile b/sound/soc/rockchip/Makefile index 05b078e7b87f..65e814d46006 100644 --- a/sound/soc/rockchip/Makefile +++ b/sound/soc/rockchip/Makefile @@ -1,10 +1,11 @@ # SPDX-License-Identifier: GPL-2.0 # ROCKCHIP Platform Support snd-soc-rockchip-i2s-objs := rockchip_i2s.o +snd-soc-rockchip-pcm-objs := rockchip_pcm.o snd-soc-rockchip-pdm-objs := rockchip_pdm.o snd-soc-rockchip-spdif-objs := rockchip_spdif.o -obj-$(CONFIG_SND_SOC_ROCKCHIP_I2S) += snd-soc-rockchip-i2s.o +obj-$(CONFIG_SND_SOC_ROCKCHIP_I2S) += snd-soc-rockchip-i2s.o snd-soc-rockchip-pcm.o obj-$(CONFIG_SND_SOC_ROCKCHIP_PDM) += snd-soc-rockchip-pdm.o obj-$(CONFIG_SND_SOC_ROCKCHIP_SPDIF) += snd-soc-rockchip-spdif.o diff --git a/sound/soc/rockchip/rockchip_i2s.c b/sound/soc/rockchip/rockchip_i2s.c index 950823d69e9c..60d43d53a8f5 100644 --- a/sound/soc/rockchip/rockchip_i2s.c +++ b/sound/soc/rockchip/rockchip_i2s.c @@ -22,6 +22,7 @@ #include #include "rockchip_i2s.h" +#include "rockchip_pcm.h" #define DRV_NAME "rockchip-i2s" @@ -674,7 +675,7 @@ static int rockchip_i2s_probe(struct platform_device *pdev) goto err_suspend; } - ret = devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, 0); + ret = rockchip_pcm_platform_register(&pdev->dev); if (ret) { dev_err(&pdev->dev, "Could not register PCM\n"); return ret; diff --git a/sound/soc/rockchip/rockchip_pcm.c b/sound/soc/rockchip/rockchip_pcm.c new file mode 100644 index 000000000000..f77538319221 --- /dev/null +++ b/sound/soc/rockchip/rockchip_pcm.c @@ -0,0 +1,45 @@ +/* + * Copyright (c) 2018 Rockchip Electronics Co. Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include + +#include +#include +#include +#include + +#include "rockchip_pcm.h" + +static const struct snd_pcm_hardware snd_rockchip_hardware = { + .info = SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_PAUSE | + SNDRV_PCM_INFO_RESUME, + .period_bytes_min = 32, + .period_bytes_max = 8192, + .periods_min = 1, + .periods_max = 52, + .buffer_bytes_max = 64 * 1024, + .fifo_size = 32, +}; + +static const struct snd_dmaengine_pcm_config rk_dmaengine_pcm_config = { + .pcm_hardware = &snd_rockchip_hardware, + .prealloc_buffer_size = 32 * 1024, +}; + +int rockchip_pcm_platform_register(struct device *dev) +{ + return devm_snd_dmaengine_pcm_register(dev, &rk_dmaengine_pcm_config, + SND_DMAENGINE_PCM_FLAG_COMPAT); +} +EXPORT_SYMBOL_GPL(rockchip_pcm_platform_register); + +MODULE_LICENSE("GPL v2"); diff --git a/sound/soc/rockchip/rockchip_pcm.h b/sound/soc/rockchip/rockchip_pcm.h new file mode 100644 index 000000000000..d6c36115c60a --- /dev/null +++ b/sound/soc/rockchip/rockchip_pcm.h @@ -0,0 +1,14 @@ +/* + * Copyright (c) 2018 Rockchip Electronics Co. Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _ROCKCHIP_PCM_H +#define _ROCKCHIP_PCM_H + +int rockchip_pcm_platform_register(struct device *dev); + +#endif -- cgit v1.2.3 From 4f29b663c08d369fe320a148179996c94cf7d01b Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 7 Jun 2018 15:50:48 +0200 Subject: ASoC: rt1305: Use ULL suffixes for 64-bit constants MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit With gcc 4.1.2: sound/soc/codecs/rt1305.c: In function ‘rt1305_calibrate’: sound/soc/codecs/rt1305.c:1069: warning: integer constant is too large for ‘long’ type sound/soc/codecs/rt1305.c:1086: warning: integer constant is too large for ‘long’ type Add the missing "ULL" suffixes to fix this. Fixes: 29bc643ddd7efb74 ("ASoC: rt1305: Add RT1305/RT1306 amplifier driver") Signed-off-by: Geert Uytterhoeven Signed-off-by: Mark Brown --- sound/soc/codecs/rt1305.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/rt1305.c b/sound/soc/codecs/rt1305.c index f4c8c45f4010..421b8fb2fa04 100644 --- a/sound/soc/codecs/rt1305.c +++ b/sound/soc/codecs/rt1305.c @@ -1066,7 +1066,7 @@ static void rt1305_calibrate(struct rt1305_priv *rt1305) pr_debug("Left_rhl = 0x%x rh=0x%x rl=0x%x\n", rhl, rh, rl); pr_info("Left channel %d.%dohm\n", (r0ohm/10), (r0ohm%10)); - r0l = 562949953421312; + r0l = 562949953421312ULL; if (rhl != 0) do_div(r0l, rhl); pr_debug("Left_r0 = 0x%llx\n", r0l); @@ -1083,7 +1083,7 @@ static void rt1305_calibrate(struct rt1305_priv *rt1305) pr_debug("Right_rhl = 0x%x rh=0x%x rl=0x%x\n", rhl, rh, rl); pr_info("Right channel %d.%dohm\n", (r0ohm/10), (r0ohm%10)); - r0r = 562949953421312; + r0r = 562949953421312ULL; if (rhl != 0) do_div(r0r, rhl); pr_debug("Right_r0 = 0x%llx\n", r0r); -- cgit v1.2.3 From d5a1826c32fa2ec2b161a89df904c6977f7ec44c Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 8 Jun 2018 10:19:25 +0200 Subject: ASoC: Intel: bytcr_rt5640: Add quirk for the Chuwi Vi10 tablet Add a quirk for the Chuwi Vi10 tablet, this tablet uses IN1 for the internal mic rather then the default IN3 and it uses JD2 rather then JD1 for its jack-detect switch. Signed-off-by: Hans de Goede Acked-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- sound/soc/intel/boards/bytcr_rt5640.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index 33065ba294a9..5c4f9ea40f57 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -463,6 +463,22 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { BYT_RT5640_SSP0_AIF1 | BYT_RT5640_MCLK_EN), }, + { + /* Chuwi Vi10 (CWI505) */ + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Hampoo"), + DMI_MATCH(DMI_BOARD_NAME, "BYT-PF02"), + DMI_MATCH(DMI_SYS_VENDOR, "ilife"), + DMI_MATCH(DMI_PRODUCT_NAME, "S165"), + }, + .driver_data = (void *)(BYT_RT5640_IN1_MAP | + BYT_RT5640_JD_SRC_JD2_IN4N | + BYT_RT5640_OVCD_TH_2000UA | + BYT_RT5640_OVCD_SF_0P75 | + BYT_RT5640_DIFF_MIC | + BYT_RT5640_SSP0_AIF1 | + BYT_RT5640_MCLK_EN), + }, { .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Circuitco"), -- cgit v1.2.3 From 62c2c9fcac4341d306dda4cf400b77e7e124480a Mon Sep 17 00:00:00 2001 From: Katsuhiro Suzuki Date: Mon, 11 Jun 2018 17:32:12 +0900 Subject: ASoC: simple-card-utils: move hp and mic detect gpios from simple-card This patch moves headphone and microphone jack detection gpios from simple-card driver. It is preparing for using this feature from other drivers. Signed-off-by: Katsuhiro Suzuki Acked-by: Kuninori Morimoto Signed-off-by: Mark Brown --- include/sound/simple_card_utils.h | 15 ++++++++ sound/soc/generic/simple-card-utils.c | 59 ++++++++++++++++++++++++++++++++ sound/soc/generic/simple-card.c | 64 ----------------------------------- 3 files changed, 74 insertions(+), 64 deletions(-) diff --git a/include/sound/simple_card_utils.h b/include/sound/simple_card_utils.h index 7e25afce6566..f82acef3b992 100644 --- a/include/sound/simple_card_utils.h +++ b/include/sound/simple_card_utils.h @@ -12,6 +12,11 @@ #include +#define asoc_simple_card_init_hp(card, sjack, prefix) \ + asoc_simple_card_init_jack(card, sjack, 1, prefix) +#define asoc_simple_card_init_mic(card, sjack, prefix) \ + asoc_simple_card_init_jack(card, sjack, 0, prefix) + struct asoc_simple_dai { const char *name; unsigned int sysclk; @@ -28,6 +33,12 @@ struct asoc_simple_card_data { u32 convert_channels; }; +struct asoc_simple_jack { + struct snd_soc_jack jack; + struct snd_soc_jack_pin pin; + struct snd_soc_jack_gpio gpio; +}; + int asoc_simple_card_parse_daifmt(struct device *dev, struct device_node *node, struct device_node *codec, @@ -107,4 +118,8 @@ int asoc_simple_card_of_parse_routing(struct snd_soc_card *card, int asoc_simple_card_of_parse_widgets(struct snd_soc_card *card, char *prefix); +int asoc_simple_card_init_jack(struct snd_soc_card *card, + struct asoc_simple_jack *sjack, + int is_hp, char *prefix); + #endif /* __SIMPLE_CARD_UTILS_H */ diff --git a/sound/soc/generic/simple-card-utils.c b/sound/soc/generic/simple-card-utils.c index 3751a07de6aa..4398c9580929 100644 --- a/sound/soc/generic/simple-card-utils.c +++ b/sound/soc/generic/simple-card-utils.c @@ -8,9 +8,13 @@ * published by the Free Software Foundation. */ #include +#include +#include #include #include +#include #include +#include #include void asoc_simple_card_convert_fixup(struct asoc_simple_card_data *data, @@ -419,6 +423,61 @@ int asoc_simple_card_of_parse_widgets(struct snd_soc_card *card, } EXPORT_SYMBOL_GPL(asoc_simple_card_of_parse_widgets); +int asoc_simple_card_init_jack(struct snd_soc_card *card, + struct asoc_simple_jack *sjack, + int is_hp, char *prefix) +{ + struct device *dev = card->dev; + enum of_gpio_flags flags; + char prop[128]; + char *pin_name; + char *gpio_name; + int mask; + int det; + + if (!prefix) + prefix = ""; + + sjack->gpio.gpio = -ENOENT; + + if (is_hp) { + snprintf(prop, sizeof(prop), "%shp-det-gpio", prefix); + pin_name = "Headphones"; + gpio_name = "Headphone detection"; + mask = SND_JACK_HEADPHONE; + } else { + snprintf(prop, sizeof(prop), "%smic-det-gpio", prefix); + pin_name = "Mic Jack"; + gpio_name = "Mic detection"; + mask = SND_JACK_MICROPHONE; + } + + det = of_get_named_gpio_flags(dev->of_node, prop, 0, &flags); + if (det == -EPROBE_DEFER) + return -EPROBE_DEFER; + + if (gpio_is_valid(det)) { + sjack->pin.pin = pin_name; + sjack->pin.mask = mask; + + sjack->gpio.name = gpio_name; + sjack->gpio.report = mask; + sjack->gpio.gpio = det; + sjack->gpio.invert = !!(flags & OF_GPIO_ACTIVE_LOW); + sjack->gpio.debounce_time = 150; + + snd_soc_card_jack_new(card, pin_name, mask, + &sjack->jack, + &sjack->pin, 1); + + snd_soc_jack_add_gpios(&sjack->jack, 1, + &sjack->gpio); + } + + return 0; +} +EXPORT_SYMBOL_GPL(asoc_simple_card_init_jack); + /* Module information */ MODULE_AUTHOR("Kuninori Morimoto "); MODULE_DESCRIPTION("ALSA SoC Simple Card Utils"); diff --git a/sound/soc/generic/simple-card.c b/sound/soc/generic/simple-card.c index 8b374af86a6e..a6477a022156 100644 --- a/sound/soc/generic/simple-card.c +++ b/sound/soc/generic/simple-card.c @@ -10,23 +10,14 @@ */ #include #include -#include #include #include -#include #include #include -#include #include #include #include -struct asoc_simple_jack { - struct snd_soc_jack jack; - struct snd_soc_jack_pin pin; - struct snd_soc_jack_gpio gpio; -}; - struct simple_card_data { struct snd_soc_card snd_card; struct simple_dai_props { @@ -49,61 +40,6 @@ struct simple_card_data { #define CELL "#sound-dai-cells" #define PREFIX "simple-audio-card," -#define asoc_simple_card_init_hp(card, sjack, prefix)\ - asoc_simple_card_init_jack(card, sjack, 1, prefix) -#define asoc_simple_card_init_mic(card, sjack, prefix)\ - asoc_simple_card_init_jack(card, sjack, 0, prefix) -static int asoc_simple_card_init_jack(struct snd_soc_card *card, - struct asoc_simple_jack *sjack, - int is_hp, char *prefix) -{ - struct device *dev = card->dev; - enum of_gpio_flags flags; - char prop[128]; - char *pin_name; - char *gpio_name; - int mask; - int det; - - sjack->gpio.gpio = -ENOENT; - - if (is_hp) { - snprintf(prop, sizeof(prop), "%shp-det-gpio", prefix); - pin_name = "Headphones"; - gpio_name = "Headphone detection"; - mask = SND_JACK_HEADPHONE; - } else { - snprintf(prop, sizeof(prop), "%smic-det-gpio", prefix); - pin_name = "Mic Jack"; - gpio_name = "Mic detection"; - mask = SND_JACK_MICROPHONE; - } - - det = of_get_named_gpio_flags(dev->of_node, prop, 0, &flags); - if (det == -EPROBE_DEFER) - return -EPROBE_DEFER; - - if (gpio_is_valid(det)) { - sjack->pin.pin = pin_name; - sjack->pin.mask = mask; - - sjack->gpio.name = gpio_name; - sjack->gpio.report = mask; - sjack->gpio.gpio = det; - sjack->gpio.invert = !!(flags & OF_GPIO_ACTIVE_LOW); - sjack->gpio.debounce_time = 150; - - snd_soc_card_jack_new(card, pin_name, mask, - &sjack->jack, - &sjack->pin, 1); - - snd_soc_jack_add_gpios(&sjack->jack, 1, - &sjack->gpio); - } - - return 0; -} - static int asoc_simple_card_startup(struct snd_pcm_substream *substream) { struct snd_soc_pcm_runtime *rtd = substream->private_data; -- cgit v1.2.3 From 8d1bd113a194407f9ad083403ea1cf92108edf5c Mon Sep 17 00:00:00 2001 From: Katsuhiro Suzuki Date: Mon, 11 Jun 2018 17:32:13 +0900 Subject: ASoC: simple-card: move hp and mic detection to soc_card probe This patch moves headphone and microphone detection to probe() of snd_soc_card from init() of snd_soc_dai_link. This is because init() is called (and an input device /dev/input/eventX is created too) twice or above if simple card has two or more DAI links. Signed-off-by: Katsuhiro Suzuki Acked-by: Kuninori Morimoto Signed-off-by: Mark Brown --- sound/soc/generic/simple-card.c | 25 +++++++++++++++++-------- 1 file changed, 17 insertions(+), 8 deletions(-) diff --git a/sound/soc/generic/simple-card.c b/sound/soc/generic/simple-card.c index a6477a022156..c5b6e04cd926 100644 --- a/sound/soc/generic/simple-card.c +++ b/sound/soc/generic/simple-card.c @@ -149,14 +149,6 @@ static int asoc_simple_card_dai_init(struct snd_soc_pcm_runtime *rtd) if (ret < 0) return ret; - ret = asoc_simple_card_init_hp(rtd->card, &priv->hp_jack, PREFIX); - if (ret < 0) - return ret; - - ret = asoc_simple_card_init_mic(rtd->card, &priv->mic_jack, PREFIX); - if (ret < 0) - return ret; - return 0; } @@ -350,6 +342,22 @@ card_parse_end: return ret; } +static int asoc_simple_soc_card_probe(struct snd_soc_card *card) +{ + struct simple_card_data *priv = snd_soc_card_get_drvdata(card); + int ret; + + ret = asoc_simple_card_init_hp(card, &priv->hp_jack, PREFIX); + if (ret < 0) + return ret; + + ret = asoc_simple_card_init_mic(card, &priv->mic_jack, PREFIX); + if (ret < 0) + return ret; + + return 0; +} + static int asoc_simple_card_probe(struct platform_device *pdev) { struct simple_card_data *priv; @@ -385,6 +393,7 @@ static int asoc_simple_card_probe(struct platform_device *pdev) card->dev = dev; card->dai_link = priv->dai_link; card->num_links = num; + card->probe = asoc_simple_soc_card_probe; if (np && of_device_is_available(np)) { -- cgit v1.2.3 From f6de35cc145fb55d842db94e74841ecd8382e012 Mon Sep 17 00:00:00 2001 From: Katsuhiro Suzuki Date: Mon, 11 Jun 2018 17:32:14 +0900 Subject: ASoC: audio-graph-card: add hp and mic detect gpios same as simple-card This patch adds headphone and microphone jack detection gpios as same as simple-card driver. Signed-off-by: Katsuhiro Suzuki Acked-by: Kuninori Morimoto Signed-off-by: Mark Brown --- sound/soc/generic/audio-graph-card.c | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-) diff --git a/sound/soc/generic/audio-graph-card.c b/sound/soc/generic/audio-graph-card.c index d93bacacbd5b..a2a3e630f11c 100644 --- a/sound/soc/generic/audio-graph-card.c +++ b/sound/soc/generic/audio-graph-card.c @@ -21,7 +21,6 @@ #include #include #include -#include #include struct graph_card_data { @@ -32,6 +31,8 @@ struct graph_card_data { unsigned int mclk_fs; } *dai_props; unsigned int mclk_fs; + struct asoc_simple_jack hp_jack; + struct asoc_simple_jack mic_jack; struct snd_soc_dai_link *dai_link; struct gpio_desc *pa_gpio; }; @@ -278,6 +279,22 @@ static int asoc_graph_get_dais_count(struct device *dev) return count; } +static int asoc_graph_soc_card_probe(struct snd_soc_card *card) +{ + struct graph_card_data *priv = snd_soc_card_get_drvdata(card); + int ret; + + ret = asoc_simple_card_init_hp(card, &priv->hp_jack, NULL); + if (ret < 0) + return ret; + + ret = asoc_simple_card_init_mic(card, &priv->mic_jack, NULL); + if (ret < 0) + return ret; + + return 0; +} + static int asoc_graph_card_probe(struct platform_device *pdev) { struct graph_card_data *priv; @@ -319,6 +336,7 @@ static int asoc_graph_card_probe(struct platform_device *pdev) card->num_links = num; card->dapm_widgets = asoc_graph_card_dapm_widgets; card->num_dapm_widgets = ARRAY_SIZE(asoc_graph_card_dapm_widgets); + card->probe = asoc_graph_soc_card_probe; ret = asoc_graph_card_parse_of(priv); if (ret < 0) { -- cgit v1.2.3 From a0d847c380ba47886fcca4168698eef51c69f109 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 12 Jun 2018 05:51:46 +0000 Subject: ASoC: rsnd: add rsnd_daidrv_get() rsnd priv has many parameters. On __rsnd_dai_probe() it uses rsnd_rdai_get() to get rdai pointer, but is using priv->daidrv directly to get daidrvhv, but it is confusable for reader. This patch adds rsnd_daidrv_get() to get daidrv from priv. Now reader can understand that rdai and daidrv are related. Signed-off-by: Kuninori Morimoto Tested-by: Hiroyuki Yokoyama Signed-off-by: Mark Brown --- sound/soc/sh/rcar/core.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/sound/soc/sh/rcar/core.c b/sound/soc/sh/rcar/core.c index eac22fef4543..6091e0916085 100644 --- a/sound/soc/sh/rcar/core.c +++ b/sound/soc/sh/rcar/core.c @@ -548,6 +548,15 @@ struct rsnd_dai *rsnd_rdai_get(struct rsnd_priv *priv, int id) return priv->rdai + id; } +static struct snd_soc_dai_driver +*rsnd_daidrv_get(struct rsnd_priv *priv, int id) +{ + if ((id < 0) || (id >= rsnd_rdai_nr(priv))) + return NULL; + + return priv->daidrv + id; +} + #define rsnd_dai_to_priv(dai) snd_soc_dai_get_drvdata(dai) static struct rsnd_dai *rsnd_dai_to_rdai(struct snd_soc_dai *dai) { @@ -1033,7 +1042,7 @@ static void __rsnd_dai_probe(struct rsnd_priv *priv, int io_i; rdai = rsnd_rdai_get(priv, dai_i); - drv = priv->daidrv + dai_i; + drv = rsnd_daidrv_get(priv, dai_i); io_playback = &rdai->playback; io_capture = &rdai->capture; -- cgit v1.2.3 From d5c4e972d512ae0b59108ca92b9b35bc5cf5c14e Mon Sep 17 00:00:00 2001 From: Rohit Kumar Date: Wed, 6 Jun 2018 14:25:24 +0530 Subject: ASoC: qcom: apq8096: set card as device drvdata snd_soc_card is retrieved as device drvdata during unbind(). Set it as drvdata during bind() to avoid memory corruption during unbind(). Signed-off-by: Rohit kumar Acked-by: Srinivas Kandagatla Signed-off-by: Mark Brown --- sound/soc/qcom/apq8096.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/qcom/apq8096.c b/sound/soc/qcom/apq8096.c index 561cd429e6f2..239b8cb77bdb 100644 --- a/sound/soc/qcom/apq8096.c +++ b/sound/soc/qcom/apq8096.c @@ -140,6 +140,7 @@ static int apq8096_bind(struct device *dev) component_bind_all(dev, card); card->dev = dev; + dev_set_drvdata(dev, card); ret = apq8096_sbc_parse_of(card); if (ret) { dev_err(dev, "Error parsing OF data\n"); -- cgit v1.2.3 From 510e419cb85798915c6426c496a164ec6328d1a7 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Wed, 6 Jun 2018 10:35:04 +0100 Subject: ASoC: twl6040: make pointer dmic_codec_dev static The pointer dmic_codec_dev is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: warning: symbol 'dmic_codec_dev' was not declared. Should it be static? Signed-off-by: Colin Ian King Acked-by: Peter Ujfalusi Signed-off-by: Mark Brown --- sound/soc/omap/omap-abe-twl6040.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/omap/omap-abe-twl6040.c b/sound/soc/omap/omap-abe-twl6040.c index 15ccbf479c96..d5ae9eb8c756 100644 --- a/sound/soc/omap/omap-abe-twl6040.c +++ b/sound/soc/omap/omap-abe-twl6040.c @@ -40,7 +40,7 @@ struct abe_twl6040 { int mclk_freq; /* MCLK frequency speed for twl6040 */ }; -struct platform_device *dmic_codec_dev; +static struct platform_device *dmic_codec_dev; static int omap_abe_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) -- cgit v1.2.3 From e380be7c557c4ddb1cb71404c10e0bfb3daf4644 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Wed, 6 Jun 2018 10:57:19 +0100 Subject: ASoC: ak5558: make two structures static The structure ak5558_pm and soc_codec_dev_ak5558 are local to the source and do not need to be in global scope, so make them static. Also make soc_codec_dev_ak5558 static. Cleans up sparse warnings: warning: symbol 'ak5558_pm' was not declared. Should it be static? warning: symbol 'soc_codec_dev_ak5558' was not declared. Should it be static? Signed-off-by: Colin Ian King Reviewed-by: Daniel Baluta Signed-off-by: Mark Brown --- sound/soc/codecs/ak5558.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/ak5558.c b/sound/soc/codecs/ak5558.c index f4ed5cc40661..448bb90c9c8e 100644 --- a/sound/soc/codecs/ak5558.c +++ b/sound/soc/codecs/ak5558.c @@ -322,13 +322,13 @@ static int __maybe_unused ak5558_runtime_resume(struct device *dev) return regcache_sync(ak5558->regmap); } -const struct dev_pm_ops ak5558_pm = { +static const struct dev_pm_ops ak5558_pm = { SET_RUNTIME_PM_OPS(ak5558_runtime_suspend, ak5558_runtime_resume, NULL) SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, pm_runtime_force_resume) }; -struct snd_soc_component_driver soc_codec_dev_ak5558 = { +static const struct snd_soc_component_driver soc_codec_dev_ak5558 = { .probe = ak5558_probe, .remove = ak5558_remove, .controls = ak5558_snd_controls, -- cgit v1.2.3 From 62624f72592b1d8e756e699cd6ade2be379f95a9 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Wed, 6 Jun 2018 11:31:23 +0100 Subject: ASoC: ak4458: make structure soc_codec_dev_ak4458 static const The structure soc_codec_dev_ak4458 is local to the source and do not need to be in global scope and can be const, make it static const. Cleans up sparse warnings: warning: symbol 'soc_codec_dev_ak4458' was not declared. Should it be static? Signed-off-by: Colin Ian King Signed-off-by: Mark Brown --- sound/soc/codecs/ak4458.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/ak4458.c b/sound/soc/codecs/ak4458.c index 31ec0ba2e639..299ada4dfaa0 100644 --- a/sound/soc/codecs/ak4458.c +++ b/sound/soc/codecs/ak4458.c @@ -558,7 +558,7 @@ static int __maybe_unused ak4458_runtime_resume(struct device *dev) } #endif /* CONFIG_PM */ -struct snd_soc_component_driver soc_codec_dev_ak4458 = { +static const struct snd_soc_component_driver soc_codec_dev_ak4458 = { .probe = ak4458_probe, .remove = ak4458_remove, .controls = ak4458_snd_controls, -- cgit v1.2.3 From 58f7d470c85801f55bbae2d3c93fe1a3d34aa143 Mon Sep 17 00:00:00 2001 From: Steven Eckhoff Date: Mon, 4 Jun 2018 15:45:40 -0500 Subject: ASoC: TSCS42xx: Add mic bias boost control Add mic bias boost control Signed-off-by: Steven Eckhoff Signed-off-by: Mark Brown --- sound/soc/codecs/tscs42xx.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/soc/codecs/tscs42xx.c b/sound/soc/codecs/tscs42xx.c index d18ff17719cc..743194052fc4 100644 --- a/sound/soc/codecs/tscs42xx.c +++ b/sound/soc/codecs/tscs42xx.c @@ -644,6 +644,9 @@ static const struct snd_kcontrol_new tscs42xx_snd_controls[] = { /* Input Channel Map */ SOC_ENUM("Input Channel Map", ch_map_select_enum), + /* Mic Bias */ + SOC_SINGLE("Mic Bias Boost Switch", 0x71, 0x07, 1, 0), + /* Coefficient Ram */ COEFF_RAM_CTL("Cascade1L BiQuad1", BIQUAD_SIZE, 0x00), COEFF_RAM_CTL("Cascade1L BiQuad2", BIQUAD_SIZE, 0x05), -- cgit v1.2.3 From 19d996cc3ad698379bcd8482dabe78abe3dc8d96 Mon Sep 17 00:00:00 2001 From: Steven Eckhoff Date: Mon, 4 Jun 2018 15:46:28 -0500 Subject: ASoC: TSCS42xx: Remove Playback/Capture in names These aren't needed and some userspace apps don't work consistently with them. Remove Playback/Capture from control names Signed-off-by: Steven Eckhoff Signed-off-by: Mark Brown --- sound/soc/codecs/tscs42xx.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) diff --git a/sound/soc/codecs/tscs42xx.c b/sound/soc/codecs/tscs42xx.c index 743194052fc4..5d596e4dab0c 100644 --- a/sound/soc/codecs/tscs42xx.c +++ b/sound/soc/codecs/tscs42xx.c @@ -625,19 +625,19 @@ static int bytes_info_ext(struct snd_kcontrol *kcontrol, static const struct snd_kcontrol_new tscs42xx_snd_controls[] = { /* Volumes */ - SOC_DOUBLE_R_TLV("Headphone Playback Volume", R_HPVOLL, R_HPVOLR, + SOC_DOUBLE_R_TLV("Headphone Volume", R_HPVOLL, R_HPVOLR, FB_HPVOLL, 0x7F, 0, hpvol_scale), - SOC_DOUBLE_R_TLV("Speaker Playback Volume", R_SPKVOLL, R_SPKVOLR, + SOC_DOUBLE_R_TLV("Speaker Volume", R_SPKVOLL, R_SPKVOLR, FB_SPKVOLL, 0x7F, 0, spkvol_scale), - SOC_DOUBLE_R_TLV("Master Playback Volume", R_DACVOLL, R_DACVOLR, + SOC_DOUBLE_R_TLV("Master Volume", R_DACVOLL, R_DACVOLR, FB_DACVOLL, 0xFF, 0, dacvol_scale), - SOC_DOUBLE_R_TLV("PCM Capture Volume", R_ADCVOLL, R_ADCVOLR, + SOC_DOUBLE_R_TLV("PCM Volume", R_ADCVOLL, R_ADCVOLR, FB_ADCVOLL, 0xFF, 0, adcvol_scale), - SOC_DOUBLE_R_TLV("Master Capture Volume", R_INVOLL, R_INVOLR, + SOC_DOUBLE_R_TLV("Input Volume", R_INVOLL, R_INVOLR, FB_INVOLL, 0x3F, 0, invol_scale), /* INSEL */ - SOC_DOUBLE_R_TLV("Mic Boost Capture Volume", R_INSELL, R_INSELR, + SOC_DOUBLE_R_TLV("Mic Boost Volume", R_INSELL, R_INSELR, FB_INSELL_MICBSTL, FV_INSELL_MICBSTL_30DB, 0, mic_boost_scale), @@ -736,9 +736,9 @@ static const struct snd_kcontrol_new tscs42xx_snd_controls[] = { R_CLECTL, FB_CLECTL_LIMIT_EN, 1, 0), SOC_SINGLE("Comp Switch", R_CLECTL, FB_CLECTL_COMP_EN, 1, 0), - SOC_SINGLE_TLV("CLE Make-Up Gain Playback Volume", + SOC_SINGLE_TLV("CLE Make-Up Gain Volume", R_MUGAIN, FB_MUGAIN_CLEMUG, 0x1f, 0, mugain_scale), - SOC_SINGLE_TLV("Comp Thresh Playback Volume", + SOC_SINGLE_TLV("Comp Thresh Volume", R_COMPTH, FB_COMPTH, 0xff, 0, compth_scale), SOC_ENUM("Comp Ratio", compressor_ratio_enum), SND_SOC_BYTES("Comp Atk Time", R_CATKTCL, 2), @@ -769,9 +769,9 @@ static const struct snd_kcontrol_new tscs42xx_snd_controls[] = { SOC_SINGLE("MBC1 Phase Invert Switch", R_DACMBCMUG1, FB_DACMBCMUG1_PHASE, 1, 0), - SOC_SINGLE_TLV("DAC MBC1 Make-Up Gain Playback Volume", + SOC_SINGLE_TLV("DAC MBC1 Make-Up Gain Volume", R_DACMBCMUG1, FB_DACMBCMUG1_MUGAIN, 0x1f, 0, mugain_scale), - SOC_SINGLE_TLV("DAC MBC1 Comp Thresh Playback Volume", + SOC_SINGLE_TLV("DAC MBC1 Comp Thresh Volume", R_DACMBCTHR1, FB_DACMBCTHR1_THRESH, 0xff, 0, compth_scale), SOC_ENUM("DAC MBC1 Comp Ratio", dac_mbc1_compressor_ratio_enum), @@ -781,9 +781,9 @@ static const struct snd_kcontrol_new tscs42xx_snd_controls[] = { SOC_SINGLE("MBC2 Phase Invert Switch", R_DACMBCMUG2, FB_DACMBCMUG2_PHASE, 1, 0), - SOC_SINGLE_TLV("DAC MBC2 Make-Up Gain Playback Volume", + SOC_SINGLE_TLV("DAC MBC2 Make-Up Gain Volume", R_DACMBCMUG2, FB_DACMBCMUG2_MUGAIN, 0x1f, 0, mugain_scale), - SOC_SINGLE_TLV("DAC MBC2 Comp Thresh Playback Volume", + SOC_SINGLE_TLV("DAC MBC2 Comp Thresh Volume", R_DACMBCTHR2, FB_DACMBCTHR2_THRESH, 0xff, 0, compth_scale), SOC_ENUM("DAC MBC2 Comp Ratio", dac_mbc2_compressor_ratio_enum), @@ -793,9 +793,9 @@ static const struct snd_kcontrol_new tscs42xx_snd_controls[] = { SOC_SINGLE("MBC3 Phase Invert Switch", R_DACMBCMUG3, FB_DACMBCMUG3_PHASE, 1, 0), - SOC_SINGLE_TLV("DAC MBC3 Make-Up Gain Playback Volume", + SOC_SINGLE_TLV("DAC MBC3 Make-Up Gain Volume", R_DACMBCMUG3, FB_DACMBCMUG3_MUGAIN, 0x1f, 0, mugain_scale), - SOC_SINGLE_TLV("DAC MBC3 Comp Thresh Playback Volume", + SOC_SINGLE_TLV("DAC MBC3 Comp Thresh Volume", R_DACMBCTHR3, FB_DACMBCTHR3_THRESH, 0xff, 0, compth_scale), SOC_ENUM("DAC MBC3 Comp Ratio", dac_mbc3_compressor_ratio_enum), -- cgit v1.2.3 From 53af408cd9f2d1c66bc081c1d82797bfe44af3e5 Mon Sep 17 00:00:00 2001 From: Steven Eckhoff Date: Mon, 4 Jun 2018 15:47:02 -0500 Subject: ASoC: TSCS42xx: Add headphone auto switching Add headphone auto switching controls Signed-off-by: Steven Eckhoff Signed-off-by: Mark Brown --- sound/soc/codecs/tscs42xx.c | 6 ++++++ sound/soc/codecs/tscs42xx.h | 8 ++++++++ 2 files changed, 14 insertions(+) diff --git a/sound/soc/codecs/tscs42xx.c b/sound/soc/codecs/tscs42xx.c index 5d596e4dab0c..7396a6e5277e 100644 --- a/sound/soc/codecs/tscs42xx.c +++ b/sound/soc/codecs/tscs42xx.c @@ -647,6 +647,12 @@ static const struct snd_kcontrol_new tscs42xx_snd_controls[] = { /* Mic Bias */ SOC_SINGLE("Mic Bias Boost Switch", 0x71, 0x07, 1, 0), + /* Headphone Auto Switching */ + SOC_SINGLE("Headphone Auto Switching Switch", + R_CTL, FB_CTL_HPSWEN, 1, 0), + SOC_SINGLE("Headphone Detect Polarity Toggle Switch", + R_CTL, FB_CTL_HPSWPOL, 1, 0), + /* Coefficient Ram */ COEFF_RAM_CTL("Cascade1L BiQuad1", BIQUAD_SIZE, 0x00), COEFF_RAM_CTL("Cascade1L BiQuad2", BIQUAD_SIZE, 0x05), diff --git a/sound/soc/codecs/tscs42xx.h b/sound/soc/codecs/tscs42xx.h index 814c8f3c4a68..6b3a21081635 100644 --- a/sound/soc/codecs/tscs42xx.h +++ b/sound/soc/codecs/tscs42xx.h @@ -34,6 +34,7 @@ enum { #define R_DACSR 0x19 #define R_PWRM1 0x1A #define R_PWRM2 0x1B +#define R_CTL 0x1C #define R_CONFIG0 0x1F #define R_CONFIG1 0x20 #define R_DMICCTL 0x24 @@ -1110,6 +1111,13 @@ enum { #define RV_PWRM2_VREF_DISABLE \ RV(FV_PWRM2_VREF_DISABLE, FB_PWRM2_VREF) +/****************************** + * R_CTL (0x1C) * + ******************************/ + +/* Fiel Offsets */ +#define FB_CTL_HPSWEN 7 +#define FB_CTL_HPSWPOL 6 /****************************** * R_CONFIG0 (0x1F) * -- cgit v1.2.3 From 0ddce71c21f03fd19867c4939d3ca710f37cdf1a Mon Sep 17 00:00:00 2001 From: Bard Liao Date: Thu, 7 Jun 2018 16:37:38 +0800 Subject: ASoC: rt5682: add rt5682 codec driver This is the initial codec driver for rt5682. Signed-off-by: Bard Liao Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/rt5682.txt | 50 + include/sound/rt5682.h | 40 + sound/soc/codecs/Kconfig | 6 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/rt5682.c | 2682 ++++++++++++++++++++ sound/soc/codecs/rt5682.h | 1324 ++++++++++ 6 files changed, 4104 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/rt5682.txt create mode 100644 include/sound/rt5682.h create mode 100644 sound/soc/codecs/rt5682.c create mode 100644 sound/soc/codecs/rt5682.h diff --git a/Documentation/devicetree/bindings/sound/rt5682.txt b/Documentation/devicetree/bindings/sound/rt5682.txt new file mode 100644 index 000000000000..312e9a129530 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/rt5682.txt @@ -0,0 +1,50 @@ +RT5682 audio CODEC + +This device supports I2C only. + +Required properties: + +- compatible : "realtek,rt5682" or "realtek,rt5682i" + +- reg : The I2C address of the device. + +Optional properties: + +- interrupts : The CODEC's interrupt output. + +- realtek,dmic1-data-pin + 0: dmic1 is not used + 1: using GPIO2 pin as dmic1 data pin + 2: using GPIO5 pin as dmic1 data pin + +- realtek,dmic1-clk-pin + 0: using GPIO1 pin as dmic1 clock pin + 1: using GPIO3 pin as dmic1 clock pin + +- realtek,jd-src + 0: No JD is used + 1: using JD1 as JD source + +- realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin. + +Pins on the device (for linking into audio routes) for RT5682: + + * DMIC L1 + * DMIC R1 + * IN1P + * HPOL + * HPOR + +Example: + +rt5682 { + compatible = "realtek,rt5682i"; + reg = <0x1a>; + interrupt-parent = <&gpio>; + interrupts = ; + realtek,ldo1-en-gpios = + <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>; + realtek,dmic1-data-pin = <1>; + realtek,dmic1-clk-pin = <1>; + realtek,jd-src = <1>; +}; diff --git a/include/sound/rt5682.h b/include/sound/rt5682.h new file mode 100644 index 000000000000..0251797ab438 --- /dev/null +++ b/include/sound/rt5682.h @@ -0,0 +1,40 @@ +/* + * linux/sound/rt5682.h -- Platform data for RT5682 + * + * Copyright 2018 Realtek Microelectronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __LINUX_SND_RT5682_H +#define __LINUX_SND_RT5682_H + +enum rt5682_dmic1_data_pin { + RT5682_DMIC1_NULL, + RT5682_DMIC1_DATA_GPIO2, + RT5682_DMIC1_DATA_GPIO5, +}; + +enum rt5682_dmic1_clk_pin { + RT5682_DMIC1_CLK_GPIO1, + RT5682_DMIC1_CLK_GPIO3, +}; + +enum rt5682_jd_src { + RT5682_JD_NULL, + RT5682_JD1, +}; + +struct rt5682_platform_data { + + int ldo1_en; /* GPIO for LDO1_EN */ + + enum rt5682_dmic1_data_pin dmic1_data_pin; + enum rt5682_dmic1_clk_pin dmic1_clk_pin; + enum rt5682_jd_src jd_src; +}; + +#endif + diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 63cf62e9c9aa..f6b8d4bf8796 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -141,6 +141,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_RT5668 if I2C select SND_SOC_RT5670 if I2C select SND_SOC_RT5677 if I2C && SPI_MASTER + select SND_SOC_RT5682 if I2C select SND_SOC_SGTL5000 if I2C select SND_SOC_SI476X if MFD_SI476X_CORE select SND_SOC_SIRF_AUDIO_CODEC @@ -778,6 +779,7 @@ config SND_SOC_RL6231 default y if SND_SOC_RT5668=y default y if SND_SOC_RT5670=y default y if SND_SOC_RT5677=y + default y if SND_SOC_RT5682=y default y if SND_SOC_RT1305=y default m if SND_SOC_RT5514=m default m if SND_SOC_RT5616=m @@ -791,6 +793,7 @@ config SND_SOC_RL6231 default m if SND_SOC_RT5668=m default m if SND_SOC_RT5670=m default m if SND_SOC_RT5677=m + default m if SND_SOC_RT5682=m default m if SND_SOC_RT1305=m config SND_SOC_RL6347A @@ -871,6 +874,9 @@ config SND_SOC_RT5677_SPI tristate default SND_SOC_RT5677 && SPI +config SND_SOC_RT5682 + tristate + #Freescale sgtl5000 codec config SND_SOC_SGTL5000 tristate "Freescale SGTL5000 CODEC" diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index e023fdf85221..e43d99a039d3 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -146,6 +146,7 @@ snd-soc-rt5668-objs := rt5668.o snd-soc-rt5670-objs := rt5670.o snd-soc-rt5677-objs := rt5677.o snd-soc-rt5677-spi-objs := rt5677-spi.o +snd-soc-rt5682-objs := rt5682.o snd-soc-sgtl5000-objs := sgtl5000.o snd-soc-alc5623-objs := alc5623.o snd-soc-alc5632-objs := alc5632.o @@ -405,6 +406,7 @@ obj-$(CONFIG_SND_SOC_RT5668) += snd-soc-rt5668.o obj-$(CONFIG_SND_SOC_RT5670) += snd-soc-rt5670.o obj-$(CONFIG_SND_SOC_RT5677) += snd-soc-rt5677.o obj-$(CONFIG_SND_SOC_RT5677_SPI) += snd-soc-rt5677-spi.o +obj-$(CONFIG_SND_SOC_RT5682) += snd-soc-rt5682.o obj-$(CONFIG_SND_SOC_SGTL5000) += snd-soc-sgtl5000.o obj-$(CONFIG_SND_SOC_SIGMADSP) += snd-soc-sigmadsp.o obj-$(CONFIG_SND_SOC_SIGMADSP_I2C) += snd-soc-sigmadsp-i2c.o diff --git a/sound/soc/codecs/rt5682.c b/sound/soc/codecs/rt5682.c new file mode 100644 index 000000000000..61a97301bcfa --- /dev/null +++ b/sound/soc/codecs/rt5682.c @@ -0,0 +1,2682 @@ +/* + * rt5682.c -- RT5682 ALSA SoC audio component driver + * + * Copyright 2018 Realtek Semiconductor Corp. + * Author: Bard Liao + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "rl6231.h" +#include "rt5682.h" + +#define RT5682_NUM_SUPPLIES 3 + +static const char *rt5682_supply_names[RT5682_NUM_SUPPLIES] = { + "AVDD", + "MICVDD", + "VBAT", +}; + +struct rt5682_priv { + struct snd_soc_component *component; + struct rt5682_platform_data pdata; + struct regmap *regmap; + struct snd_soc_jack *hs_jack; + struct regulator_bulk_data supplies[RT5682_NUM_SUPPLIES]; + struct delayed_work jack_detect_work; + struct delayed_work jd_check_work; + struct mutex calibrate_mutex; + + int sysclk; + int sysclk_src; + int lrck[RT5682_AIFS]; + int bclk[RT5682_AIFS]; + int master[RT5682_AIFS]; + + int pll_src; + int pll_in; + int pll_out; + + int jack_type; +}; + +static const struct reg_sequence patch_list[] = { + {0x01c1, 0x1000}, +}; + +static const struct reg_default rt5682_reg[] = { + {0x0002, 0x8080}, + {0x0003, 0x8000}, + {0x0005, 0x0000}, + {0x0006, 0x0000}, + {0x0008, 0x800f}, + {0x000b, 0x0000}, + {0x0010, 0x4040}, + {0x0011, 0x0000}, + {0x0012, 0x1404}, + {0x0013, 0x1000}, + {0x0014, 0xa00a}, + {0x0015, 0x0404}, + {0x0016, 0x0404}, + {0x0019, 0xafaf}, + {0x001c, 0x2f2f}, + {0x001f, 0x0000}, + {0x0022, 0x5757}, + {0x0023, 0x0039}, + {0x0024, 0x000b}, + {0x0026, 0xc0c4}, + {0x0029, 0x8080}, + {0x002a, 0xa0a0}, + {0x002b, 0x0300}, + {0x0030, 0x0000}, + {0x003c, 0x0080}, + {0x0044, 0x0c0c}, + {0x0049, 0x0000}, + {0x0061, 0x0000}, + {0x0062, 0x0000}, + {0x0063, 0x003f}, + {0x0064, 0x0000}, + {0x0065, 0x0000}, + {0x0066, 0x0030}, + {0x0067, 0x0000}, + {0x006b, 0x0000}, + {0x006c, 0x0000}, + {0x006d, 0x2200}, + {0x006e, 0x0a10}, + {0x0070, 0x8000}, + {0x0071, 0x8000}, + {0x0073, 0x0000}, + {0x0074, 0x0000}, + {0x0075, 0x0002}, + {0x0076, 0x0001}, + {0x0079, 0x0000}, + {0x007a, 0x0000}, + {0x007b, 0x0000}, + {0x007c, 0x0100}, + {0x007e, 0x0000}, + {0x0080, 0x0000}, + {0x0081, 0x0000}, + {0x0082, 0x0000}, + {0x0083, 0x0000}, + {0x0084, 0x0000}, + {0x0085, 0x0000}, + {0x0086, 0x0005}, + {0x0087, 0x0000}, + {0x0088, 0x0000}, + {0x008c, 0x0003}, + {0x008d, 0x0000}, + {0x008e, 0x0060}, + {0x008f, 0x1000}, + {0x0091, 0x0c26}, + {0x0092, 0x0073}, + {0x0093, 0x0000}, + {0x0094, 0x0080}, + {0x0098, 0x0000}, + {0x009a, 0x0000}, + {0x009b, 0x0000}, + {0x009c, 0x0000}, + {0x009d, 0x0000}, + {0x009e, 0x100c}, + {0x009f, 0x0000}, + {0x00a0, 0x0000}, + {0x00a3, 0x0002}, + {0x00a4, 0x0001}, + {0x00ae, 0x2040}, + {0x00af, 0x0000}, + {0x00b6, 0x0000}, + {0x00b7, 0x0000}, + {0x00b8, 0x0000}, + {0x00b9, 0x0002}, + {0x00be, 0x0000}, + {0x00c0, 0x0160}, + {0x00c1, 0x82a0}, + {0x00c2, 0x0000}, + {0x00d0, 0x0000}, + {0x00d1, 0x2244}, + {0x00d2, 0x3300}, + {0x00d3, 0x2200}, + {0x00d4, 0x0000}, + {0x00d9, 0x0009}, + {0x00da, 0x0000}, + {0x00db, 0x0000}, + {0x00dc, 0x00c0}, + {0x00dd, 0x2220}, + {0x00de, 0x3131}, + {0x00df, 0x3131}, + {0x00e0, 0x3131}, + {0x00e2, 0x0000}, + {0x00e3, 0x4000}, + {0x00e4, 0x0aa0}, + {0x00e5, 0x3131}, + {0x00e6, 0x3131}, + {0x00e7, 0x3131}, + {0x00e8, 0x3131}, + {0x00ea, 0xb320}, + {0x00eb, 0x0000}, + {0x00f0, 0x0000}, + {0x00f1, 0x00d0}, + {0x00f2, 0x00d0}, + {0x00f6, 0x0000}, + {0x00fa, 0x0000}, + {0x00fb, 0x0000}, + {0x00fc, 0x0000}, + {0x00fd, 0x0000}, + {0x00fe, 0x10ec}, + {0x00ff, 0x6530}, + {0x0100, 0xa0a0}, + {0x010b, 0x0000}, + {0x010c, 0xae00}, + {0x010d, 0xaaa0}, + {0x010e, 0x8aa2}, + {0x010f, 0x02a2}, + {0x0110, 0xc000}, + {0x0111, 0x04a2}, + {0x0112, 0x2800}, + {0x0113, 0x0000}, + {0x0117, 0x0100}, + {0x0125, 0x0410}, + {0x0132, 0x6026}, + {0x0136, 0x5555}, + {0x0138, 0x3700}, + {0x013a, 0x2000}, + {0x013b, 0x2000}, + {0x013c, 0x2005}, + {0x013f, 0x0000}, + {0x0142, 0x0000}, + {0x0145, 0x0002}, + {0x0146, 0x0000}, + {0x0147, 0x0000}, + {0x0148, 0x0000}, + {0x0149, 0x0000}, + {0x0150, 0x79a1}, + {0x0151, 0x0000}, + {0x0160, 0x4ec0}, + {0x0161, 0x0080}, + {0x0162, 0x0200}, + {0x0163, 0x0800}, + {0x0164, 0x0000}, + {0x0165, 0x0000}, + {0x0166, 0x0000}, + {0x0167, 0x000f}, + {0x0168, 0x000f}, + {0x0169, 0x0021}, + {0x0190, 0x413d}, + {0x0194, 0x0000}, + {0x0195, 0x0000}, + {0x0197, 0x0022}, + {0x0198, 0x0000}, + {0x0199, 0x0000}, + {0x01af, 0x0000}, + {0x01b0, 0x0400}, + {0x01b1, 0x0000}, + {0x01b2, 0x0000}, + {0x01b3, 0x0000}, + {0x01b4, 0x0000}, + {0x01b5, 0x0000}, + {0x01b6, 0x01c3}, + {0x01b7, 0x02a0}, + {0x01b8, 0x03e9}, + {0x01b9, 0x1389}, + {0x01ba, 0xc351}, + {0x01bb, 0x0009}, + {0x01bc, 0x0018}, + {0x01bd, 0x002a}, + {0x01be, 0x004c}, + {0x01bf, 0x0097}, + {0x01c0, 0x433d}, + {0x01c2, 0x0000}, + {0x01c3, 0x0000}, + {0x01c4, 0x0000}, + {0x01c5, 0x0000}, + {0x01c6, 0x0000}, + {0x01c7, 0x0000}, + {0x01c8, 0x40af}, + {0x01c9, 0x0702}, + {0x01ca, 0x0000}, + {0x01cb, 0x0000}, + {0x01cc, 0x5757}, + {0x01cd, 0x5757}, + {0x01ce, 0x5757}, + {0x01cf, 0x5757}, + {0x01d0, 0x5757}, + {0x01d1, 0x5757}, + {0x01d2, 0x5757}, + {0x01d3, 0x5757}, + {0x01d4, 0x5757}, + {0x01d5, 0x5757}, + {0x01d6, 0x0000}, + {0x01d7, 0x0008}, + {0x01d8, 0x0029}, + {0x01d9, 0x3333}, + {0x01da, 0x0000}, + {0x01db, 0x0004}, + {0x01dc, 0x0000}, + {0x01de, 0x7c00}, + {0x01df, 0x0320}, + {0x01e0, 0x06a1}, + {0x01e1, 0x0000}, + {0x01e2, 0x0000}, + {0x01e3, 0x0000}, + {0x01e4, 0x0000}, + {0x01e6, 0x0001}, + {0x01e7, 0x0000}, + {0x01e8, 0x0000}, + {0x01ea, 0x0000}, + {0x01eb, 0x0000}, + {0x01ec, 0x0000}, + {0x01ed, 0x0000}, + {0x01ee, 0x0000}, + {0x01ef, 0x0000}, + {0x01f0, 0x0000}, + {0x01f1, 0x0000}, + {0x01f2, 0x0000}, + {0x01f3, 0x0000}, + {0x01f4, 0x0000}, + {0x0210, 0x6297}, + {0x0211, 0xa005}, + {0x0212, 0x824c}, + {0x0213, 0xf7ff}, + {0x0214, 0xf24c}, + {0x0215, 0x0102}, + {0x0216, 0x00a3}, + {0x0217, 0x0048}, + {0x0218, 0xa2c0}, + {0x0219, 0x0400}, + {0x021a, 0x00c8}, + {0x021b, 0x00c0}, + {0x021c, 0x0000}, + {0x0250, 0x4500}, + {0x0251, 0x40b3}, + {0x0252, 0x0000}, + {0x0253, 0x0000}, + {0x0254, 0x0000}, + {0x0255, 0x0000}, + {0x0256, 0x0000}, + {0x0257, 0x0000}, + {0x0258, 0x0000}, + {0x0259, 0x0000}, + {0x025a, 0x0005}, + {0x0270, 0x0000}, + {0x02ff, 0x0110}, + {0x0300, 0x001f}, + {0x0301, 0x032c}, + {0x0302, 0x5f21}, + {0x0303, 0x4000}, + {0x0304, 0x4000}, + {0x0305, 0x06d5}, + {0x0306, 0x8000}, + {0x0307, 0x0700}, + {0x0310, 0x4560}, + {0x0311, 0xa4a8}, + {0x0312, 0x7418}, + {0x0313, 0x0000}, + {0x0314, 0x0006}, + {0x0315, 0xffff}, + {0x0316, 0xc400}, + {0x0317, 0x0000}, + {0x03c0, 0x7e00}, + {0x03c1, 0x8000}, + {0x03c2, 0x8000}, + {0x03c3, 0x8000}, + {0x03c4, 0x8000}, + {0x03c5, 0x8000}, + {0x03c6, 0x8000}, + {0x03c7, 0x8000}, + {0x03c8, 0x8000}, + {0x03c9, 0x8000}, + {0x03ca, 0x8000}, + {0x03cb, 0x8000}, + {0x03cc, 0x8000}, + {0x03d0, 0x0000}, + {0x03d1, 0x0000}, + {0x03d2, 0x0000}, + {0x03d3, 0x0000}, + {0x03d4, 0x2000}, + {0x03d5, 0x2000}, + {0x03d6, 0x0000}, + {0x03d7, 0x0000}, + {0x03d8, 0x2000}, + {0x03d9, 0x2000}, + {0x03da, 0x2000}, + {0x03db, 0x2000}, + {0x03dc, 0x0000}, + {0x03dd, 0x0000}, + {0x03de, 0x0000}, + {0x03df, 0x2000}, + {0x03e0, 0x0000}, + {0x03e1, 0x0000}, + {0x03e2, 0x0000}, + {0x03e3, 0x0000}, + {0x03e4, 0x0000}, + {0x03e5, 0x0000}, + {0x03e6, 0x0000}, + {0x03e7, 0x0000}, + {0x03e8, 0x0000}, + {0x03e9, 0x0000}, + {0x03ea, 0x0000}, + {0x03eb, 0x0000}, + {0x03ec, 0x0000}, + {0x03ed, 0x0000}, + {0x03ee, 0x0000}, + {0x03ef, 0x0000}, + {0x03f0, 0x0800}, + {0x03f1, 0x0800}, + {0x03f2, 0x0800}, + {0x03f3, 0x0800}, +}; + +static bool rt5682_volatile_register(struct device *dev, unsigned int reg) +{ + switch (reg) { + case RT5682_RESET: + case RT5682_CBJ_CTRL_2: + case RT5682_INT_ST_1: + case RT5682_4BTN_IL_CMD_1: + case RT5682_AJD1_CTRL: + case RT5682_HP_CALIB_CTRL_1: + case RT5682_DEVICE_ID: + case RT5682_I2C_MODE: + case RT5682_HP_CALIB_CTRL_10: + case RT5682_EFUSE_CTRL_2: + case RT5682_JD_TOP_VC_VTRL: + case RT5682_HP_IMP_SENS_CTRL_19: + case RT5682_IL_CMD_1: + case RT5682_SAR_IL_CMD_2: + case RT5682_SAR_IL_CMD_4: + case RT5682_SAR_IL_CMD_10: + case RT5682_SAR_IL_CMD_11: + case RT5682_EFUSE_CTRL_6...RT5682_EFUSE_CTRL_11: + case RT5682_HP_CALIB_STA_1...RT5682_HP_CALIB_STA_11: + return true; + default: + return false; + } +} + +static bool rt5682_readable_register(struct device *dev, unsigned int reg) +{ + switch (reg) { + case RT5682_RESET: + case RT5682_VERSION_ID: + case RT5682_VENDOR_ID: + case RT5682_DEVICE_ID: + case RT5682_HP_CTRL_1: + case RT5682_HP_CTRL_2: + case RT5682_HPL_GAIN: + case RT5682_HPR_GAIN: + case RT5682_I2C_CTRL: + case RT5682_CBJ_BST_CTRL: + case RT5682_CBJ_CTRL_1: + case RT5682_CBJ_CTRL_2: + case RT5682_CBJ_CTRL_3: + case RT5682_CBJ_CTRL_4: + case RT5682_CBJ_CTRL_5: + case RT5682_CBJ_CTRL_6: + case RT5682_CBJ_CTRL_7: + case RT5682_DAC1_DIG_VOL: + case RT5682_STO1_ADC_DIG_VOL: + case RT5682_STO1_ADC_BOOST: + case RT5682_HP_IMP_GAIN_1: + case RT5682_HP_IMP_GAIN_2: + case RT5682_SIDETONE_CTRL: + case RT5682_STO1_ADC_MIXER: + case RT5682_AD_DA_MIXER: + case RT5682_STO1_DAC_MIXER: + case RT5682_A_DAC1_MUX: + case RT5682_DIG_INF2_DATA: + case RT5682_REC_MIXER: + case RT5682_CAL_REC: + case RT5682_ALC_BACK_GAIN: + case RT5682_PWR_DIG_1: + case RT5682_PWR_DIG_2: + case RT5682_PWR_ANLG_1: + case RT5682_PWR_ANLG_2: + case RT5682_PWR_ANLG_3: + case RT5682_PWR_MIXER: + case RT5682_PWR_VOL: + case RT5682_CLK_DET: + case RT5682_RESET_LPF_CTRL: + case RT5682_RESET_HPF_CTRL: + case RT5682_DMIC_CTRL_1: + case RT5682_I2S1_SDP: + case RT5682_I2S2_SDP: + case RT5682_ADDA_CLK_1: + case RT5682_ADDA_CLK_2: + case RT5682_I2S1_F_DIV_CTRL_1: + case RT5682_I2S1_F_DIV_CTRL_2: + case RT5682_TDM_CTRL: + case RT5682_TDM_ADDA_CTRL_1: + case RT5682_TDM_ADDA_CTRL_2: + case RT5682_DATA_SEL_CTRL_1: + case RT5682_TDM_TCON_CTRL: + case RT5682_GLB_CLK: + case RT5682_PLL_CTRL_1: + case RT5682_PLL_CTRL_2: + case RT5682_PLL_TRACK_1: + case RT5682_PLL_TRACK_2: + case RT5682_PLL_TRACK_3: + case RT5682_PLL_TRACK_4: + case RT5682_PLL_TRACK_5: + case RT5682_PLL_TRACK_6: + case RT5682_PLL_TRACK_11: + case RT5682_SDW_REF_CLK: + case RT5682_DEPOP_1: + case RT5682_DEPOP_2: + case RT5682_HP_CHARGE_PUMP_1: + case RT5682_HP_CHARGE_PUMP_2: + case RT5682_MICBIAS_1: + case RT5682_MICBIAS_2: + case RT5682_PLL_TRACK_12: + case RT5682_PLL_TRACK_14: + case RT5682_PLL2_CTRL_1: + case RT5682_PLL2_CTRL_2: + case RT5682_PLL2_CTRL_3: + case RT5682_PLL2_CTRL_4: + case RT5682_RC_CLK_CTRL: + case RT5682_I2S_M_CLK_CTRL_1: + case RT5682_I2S2_F_DIV_CTRL_1: + case RT5682_I2S2_F_DIV_CTRL_2: + case RT5682_EQ_CTRL_1: + case RT5682_EQ_CTRL_2: + case RT5682_IRQ_CTRL_1: + case RT5682_IRQ_CTRL_2: + case RT5682_IRQ_CTRL_3: + case RT5682_IRQ_CTRL_4: + case RT5682_INT_ST_1: + case RT5682_GPIO_CTRL_1: + case RT5682_GPIO_CTRL_2: + case RT5682_GPIO_CTRL_3: + case RT5682_HP_AMP_DET_CTRL_1: + case RT5682_HP_AMP_DET_CTRL_2: + case RT5682_MID_HP_AMP_DET: + case RT5682_LOW_HP_AMP_DET: + case RT5682_DELAY_BUF_CTRL: + case RT5682_SV_ZCD_1: + case RT5682_SV_ZCD_2: + case RT5682_IL_CMD_1: + case RT5682_IL_CMD_2: + case RT5682_IL_CMD_3: + case RT5682_IL_CMD_4: + case RT5682_IL_CMD_5: + case RT5682_IL_CMD_6: + case RT5682_4BTN_IL_CMD_1: + case RT5682_4BTN_IL_CMD_2: + case RT5682_4BTN_IL_CMD_3: + case RT5682_4BTN_IL_CMD_4: + case RT5682_4BTN_IL_CMD_5: + case RT5682_4BTN_IL_CMD_6: + case RT5682_4BTN_IL_CMD_7: + case RT5682_ADC_STO1_HP_CTRL_1: + case RT5682_ADC_STO1_HP_CTRL_2: + case RT5682_AJD1_CTRL: + case RT5682_JD1_THD: + case RT5682_JD2_THD: + case RT5682_JD_CTRL_1: + case RT5682_DUMMY_1: + case RT5682_DUMMY_2: + case RT5682_DUMMY_3: + case RT5682_DAC_ADC_DIG_VOL1: + case RT5682_BIAS_CUR_CTRL_2: + case RT5682_BIAS_CUR_CTRL_3: + case RT5682_BIAS_CUR_CTRL_4: + case RT5682_BIAS_CUR_CTRL_5: + case RT5682_BIAS_CUR_CTRL_6: + case RT5682_BIAS_CUR_CTRL_7: + case RT5682_BIAS_CUR_CTRL_8: + case RT5682_BIAS_CUR_CTRL_9: + case RT5682_BIAS_CUR_CTRL_10: + case RT5682_VREF_REC_OP_FB_CAP_CTRL: + case RT5682_CHARGE_PUMP_1: + case RT5682_DIG_IN_CTRL_1: + case RT5682_PAD_DRIVING_CTRL: + case RT5682_SOFT_RAMP_DEPOP: + case RT5682_CHOP_DAC: + case RT5682_CHOP_ADC: + case RT5682_CALIB_ADC_CTRL: + case RT5682_VOL_TEST: + case RT5682_SPKVDD_DET_STA: + case RT5682_TEST_MODE_CTRL_1: + case RT5682_TEST_MODE_CTRL_2: + case RT5682_TEST_MODE_CTRL_3: + case RT5682_TEST_MODE_CTRL_4: + case RT5682_TEST_MODE_CTRL_5: + case RT5682_PLL1_INTERNAL: + case RT5682_PLL2_INTERNAL: + case RT5682_STO_NG2_CTRL_1: + case RT5682_STO_NG2_CTRL_2: + case RT5682_STO_NG2_CTRL_3: + case RT5682_STO_NG2_CTRL_4: + case RT5682_STO_NG2_CTRL_5: + case RT5682_STO_NG2_CTRL_6: + case RT5682_STO_NG2_CTRL_7: + case RT5682_STO_NG2_CTRL_8: + case RT5682_STO_NG2_CTRL_9: + case RT5682_STO_NG2_CTRL_10: + case RT5682_STO1_DAC_SIL_DET: + case RT5682_SIL_PSV_CTRL1: + case RT5682_SIL_PSV_CTRL2: + case RT5682_SIL_PSV_CTRL3: + case RT5682_SIL_PSV_CTRL4: + case RT5682_SIL_PSV_CTRL5: + case RT5682_HP_IMP_SENS_CTRL_01: + case RT5682_HP_IMP_SENS_CTRL_02: + case RT5682_HP_IMP_SENS_CTRL_03: + case RT5682_HP_IMP_SENS_CTRL_04: + case RT5682_HP_IMP_SENS_CTRL_05: + case RT5682_HP_IMP_SENS_CTRL_06: + case RT5682_HP_IMP_SENS_CTRL_07: + case RT5682_HP_IMP_SENS_CTRL_08: + case RT5682_HP_IMP_SENS_CTRL_09: + case RT5682_HP_IMP_SENS_CTRL_10: + case RT5682_HP_IMP_SENS_CTRL_11: + case RT5682_HP_IMP_SENS_CTRL_12: + case RT5682_HP_IMP_SENS_CTRL_13: + case RT5682_HP_IMP_SENS_CTRL_14: + case RT5682_HP_IMP_SENS_CTRL_15: + case RT5682_HP_IMP_SENS_CTRL_16: + case RT5682_HP_IMP_SENS_CTRL_17: + case RT5682_HP_IMP_SENS_CTRL_18: + case RT5682_HP_IMP_SENS_CTRL_19: + case RT5682_HP_IMP_SENS_CTRL_20: + case RT5682_HP_IMP_SENS_CTRL_21: + case RT5682_HP_IMP_SENS_CTRL_22: + case RT5682_HP_IMP_SENS_CTRL_23: + case RT5682_HP_IMP_SENS_CTRL_24: + case RT5682_HP_IMP_SENS_CTRL_25: + case RT5682_HP_IMP_SENS_CTRL_26: + case RT5682_HP_IMP_SENS_CTRL_27: + case RT5682_HP_IMP_SENS_CTRL_28: + case RT5682_HP_IMP_SENS_CTRL_29: + case RT5682_HP_IMP_SENS_CTRL_30: + case RT5682_HP_IMP_SENS_CTRL_31: + case RT5682_HP_IMP_SENS_CTRL_32: + case RT5682_HP_IMP_SENS_CTRL_33: + case RT5682_HP_IMP_SENS_CTRL_34: + case RT5682_HP_IMP_SENS_CTRL_35: + case RT5682_HP_IMP_SENS_CTRL_36: + case RT5682_HP_IMP_SENS_CTRL_37: + case RT5682_HP_IMP_SENS_CTRL_38: + case RT5682_HP_IMP_SENS_CTRL_39: + case RT5682_HP_IMP_SENS_CTRL_40: + case RT5682_HP_IMP_SENS_CTRL_41: + case RT5682_HP_IMP_SENS_CTRL_42: + case RT5682_HP_IMP_SENS_CTRL_43: + case RT5682_HP_LOGIC_CTRL_1: + case RT5682_HP_LOGIC_CTRL_2: + case RT5682_HP_LOGIC_CTRL_3: + case RT5682_HP_CALIB_CTRL_1: + case RT5682_HP_CALIB_CTRL_2: + case RT5682_HP_CALIB_CTRL_3: + case RT5682_HP_CALIB_CTRL_4: + case RT5682_HP_CALIB_CTRL_5: + case RT5682_HP_CALIB_CTRL_6: + case RT5682_HP_CALIB_CTRL_7: + case RT5682_HP_CALIB_CTRL_9: + case RT5682_HP_CALIB_CTRL_10: + case RT5682_HP_CALIB_CTRL_11: + case RT5682_HP_CALIB_STA_1: + case RT5682_HP_CALIB_STA_2: + case RT5682_HP_CALIB_STA_3: + case RT5682_HP_CALIB_STA_4: + case RT5682_HP_CALIB_STA_5: + case RT5682_HP_CALIB_STA_6: + case RT5682_HP_CALIB_STA_7: + case RT5682_HP_CALIB_STA_8: + case RT5682_HP_CALIB_STA_9: + case RT5682_HP_CALIB_STA_10: + case RT5682_HP_CALIB_STA_11: + case RT5682_SAR_IL_CMD_1: + case RT5682_SAR_IL_CMD_2: + case RT5682_SAR_IL_CMD_3: + case RT5682_SAR_IL_CMD_4: + case RT5682_SAR_IL_CMD_5: + case RT5682_SAR_IL_CMD_6: + case RT5682_SAR_IL_CMD_7: + case RT5682_SAR_IL_CMD_8: + case RT5682_SAR_IL_CMD_9: + case RT5682_SAR_IL_CMD_10: + case RT5682_SAR_IL_CMD_11: + case RT5682_SAR_IL_CMD_12: + case RT5682_SAR_IL_CMD_13: + case RT5682_EFUSE_CTRL_1: + case RT5682_EFUSE_CTRL_2: + case RT5682_EFUSE_CTRL_3: + case RT5682_EFUSE_CTRL_4: + case RT5682_EFUSE_CTRL_5: + case RT5682_EFUSE_CTRL_6: + case RT5682_EFUSE_CTRL_7: + case RT5682_EFUSE_CTRL_8: + case RT5682_EFUSE_CTRL_9: + case RT5682_EFUSE_CTRL_10: + case RT5682_EFUSE_CTRL_11: + case RT5682_JD_TOP_VC_VTRL: + case RT5682_DRC1_CTRL_0: + case RT5682_DRC1_CTRL_1: + case RT5682_DRC1_CTRL_2: + case RT5682_DRC1_CTRL_3: + case RT5682_DRC1_CTRL_4: + case RT5682_DRC1_CTRL_5: + case RT5682_DRC1_CTRL_6: + case RT5682_DRC1_HARD_LMT_CTRL_1: + case RT5682_DRC1_HARD_LMT_CTRL_2: + case RT5682_DRC1_PRIV_1: + case RT5682_DRC1_PRIV_2: + case RT5682_DRC1_PRIV_3: + case RT5682_DRC1_PRIV_4: + case RT5682_DRC1_PRIV_5: + case RT5682_DRC1_PRIV_6: + case RT5682_DRC1_PRIV_7: + case RT5682_DRC1_PRIV_8: + case RT5682_EQ_AUTO_RCV_CTRL1: + case RT5682_EQ_AUTO_RCV_CTRL2: + case RT5682_EQ_AUTO_RCV_CTRL3: + case RT5682_EQ_AUTO_RCV_CTRL4: + case RT5682_EQ_AUTO_RCV_CTRL5: + case RT5682_EQ_AUTO_RCV_CTRL6: + case RT5682_EQ_AUTO_RCV_CTRL7: + case RT5682_EQ_AUTO_RCV_CTRL8: + case RT5682_EQ_AUTO_RCV_CTRL9: + case RT5682_EQ_AUTO_RCV_CTRL10: + case RT5682_EQ_AUTO_RCV_CTRL11: + case RT5682_EQ_AUTO_RCV_CTRL12: + case RT5682_EQ_AUTO_RCV_CTRL13: + case RT5682_ADC_L_EQ_LPF1_A1: + case RT5682_R_EQ_LPF1_A1: + case RT5682_L_EQ_LPF1_H0: + case RT5682_R_EQ_LPF1_H0: + case RT5682_L_EQ_BPF1_A1: + case RT5682_R_EQ_BPF1_A1: + case RT5682_L_EQ_BPF1_A2: + case RT5682_R_EQ_BPF1_A2: + case RT5682_L_EQ_BPF1_H0: + case RT5682_R_EQ_BPF1_H0: + case RT5682_L_EQ_BPF2_A1: + case RT5682_R_EQ_BPF2_A1: + case RT5682_L_EQ_BPF2_A2: + case RT5682_R_EQ_BPF2_A2: + case RT5682_L_EQ_BPF2_H0: + case RT5682_R_EQ_BPF2_H0: + case RT5682_L_EQ_BPF3_A1: + case RT5682_R_EQ_BPF3_A1: + case RT5682_L_EQ_BPF3_A2: + case RT5682_R_EQ_BPF3_A2: + case RT5682_L_EQ_BPF3_H0: + case RT5682_R_EQ_BPF3_H0: + case RT5682_L_EQ_BPF4_A1: + case RT5682_R_EQ_BPF4_A1: + case RT5682_L_EQ_BPF4_A2: + case RT5682_R_EQ_BPF4_A2: + case RT5682_L_EQ_BPF4_H0: + case RT5682_R_EQ_BPF4_H0: + case RT5682_L_EQ_HPF1_A1: + case RT5682_R_EQ_HPF1_A1: + case RT5682_L_EQ_HPF1_H0: + case RT5682_R_EQ_HPF1_H0: + case RT5682_L_EQ_PRE_VOL: + case RT5682_R_EQ_PRE_VOL: + case RT5682_L_EQ_POST_VOL: + case RT5682_R_EQ_POST_VOL: + case RT5682_I2C_MODE: + return true; + default: + return false; + } +} + +static const DECLARE_TLV_DB_SCALE(hp_vol_tlv, -2250, 150, 0); +static const DECLARE_TLV_DB_SCALE(dac_vol_tlv, -65625, 375, 0); +static const DECLARE_TLV_DB_SCALE(adc_vol_tlv, -17625, 375, 0); +static const DECLARE_TLV_DB_SCALE(adc_bst_tlv, 0, 1200, 0); + +/* {0, +20, +24, +30, +35, +40, +44, +50, +52} dB */ +static const DECLARE_TLV_DB_RANGE(bst_tlv, + 0, 0, TLV_DB_SCALE_ITEM(0, 0, 0), + 1, 1, TLV_DB_SCALE_ITEM(2000, 0, 0), + 2, 2, TLV_DB_SCALE_ITEM(2400, 0, 0), + 3, 5, TLV_DB_SCALE_ITEM(3000, 500, 0), + 6, 6, TLV_DB_SCALE_ITEM(4400, 0, 0), + 7, 7, TLV_DB_SCALE_ITEM(5000, 0, 0), + 8, 8, TLV_DB_SCALE_ITEM(5200, 0, 0) +); + +/* Interface data select */ +static const char * const rt5682_data_select[] = { + "L/R", "R/L", "L/L", "R/R" +}; + +static SOC_ENUM_SINGLE_DECL(rt5682_if2_adc_enum, + RT5682_DIG_INF2_DATA, RT5682_IF2_ADC_SEL_SFT, rt5682_data_select); + +static SOC_ENUM_SINGLE_DECL(rt5682_if1_01_adc_enum, + RT5682_TDM_ADDA_CTRL_1, RT5682_IF1_ADC1_SEL_SFT, rt5682_data_select); + +static SOC_ENUM_SINGLE_DECL(rt5682_if1_23_adc_enum, + RT5682_TDM_ADDA_CTRL_1, RT5682_IF1_ADC2_SEL_SFT, rt5682_data_select); + +static SOC_ENUM_SINGLE_DECL(rt5682_if1_45_adc_enum, + RT5682_TDM_ADDA_CTRL_1, RT5682_IF1_ADC3_SEL_SFT, rt5682_data_select); + +static SOC_ENUM_SINGLE_DECL(rt5682_if1_67_adc_enum, + RT5682_TDM_ADDA_CTRL_1, RT5682_IF1_ADC4_SEL_SFT, rt5682_data_select); + +static const struct snd_kcontrol_new rt5682_if2_adc_swap_mux = + SOC_DAPM_ENUM("IF2 ADC Swap Mux", rt5682_if2_adc_enum); + +static const struct snd_kcontrol_new rt5682_if1_01_adc_swap_mux = + SOC_DAPM_ENUM("IF1 01 ADC Swap Mux", rt5682_if1_01_adc_enum); + +static const struct snd_kcontrol_new rt5682_if1_23_adc_swap_mux = + SOC_DAPM_ENUM("IF1 23 ADC Swap Mux", rt5682_if1_23_adc_enum); + +static const struct snd_kcontrol_new rt5682_if1_45_adc_swap_mux = + SOC_DAPM_ENUM("IF1 45 ADC Swap Mux", rt5682_if1_45_adc_enum); + +static const struct snd_kcontrol_new rt5682_if1_67_adc_swap_mux = + SOC_DAPM_ENUM("IF1 67 ADC Swap Mux", rt5682_if1_67_adc_enum); + +static void rt5682_reset(struct regmap *regmap) +{ + regmap_write(regmap, RT5682_RESET, 0); + regmap_write(regmap, RT5682_I2C_MODE, 1); +} +/** + * rt5682_sel_asrc_clk_src - select ASRC clock source for a set of filters + * @component: SoC audio component device. + * @filter_mask: mask of filters. + * @clk_src: clock source + * + * The ASRC function is for asynchronous MCLK and LRCK. Also, since RT5682 can + * only support standard 32fs or 64fs i2s format, ASRC should be enabled to + * support special i2s clock format such as Intel's 100fs(100 * sampling rate). + * ASRC function will track i2s clock and generate a corresponding system clock + * for codec. This function provides an API to select the clock source for a + * set of filters specified by the mask. And the component driver will turn on + * ASRC for these filters if ASRC is selected as their clock source. + */ +int rt5682_sel_asrc_clk_src(struct snd_soc_component *component, + unsigned int filter_mask, unsigned int clk_src) +{ + + switch (clk_src) { + case RT5682_CLK_SEL_SYS: + case RT5682_CLK_SEL_I2S1_ASRC: + case RT5682_CLK_SEL_I2S2_ASRC: + break; + + default: + return -EINVAL; + } + + if (filter_mask & RT5682_DA_STEREO1_FILTER) { + snd_soc_component_update_bits(component, RT5682_PLL_TRACK_2, + RT5682_FILTER_CLK_SEL_MASK, + clk_src << RT5682_FILTER_CLK_SEL_SFT); + } + + if (filter_mask & RT5682_AD_STEREO1_FILTER) { + snd_soc_component_update_bits(component, RT5682_PLL_TRACK_3, + RT5682_FILTER_CLK_SEL_MASK, + clk_src << RT5682_FILTER_CLK_SEL_SFT); + } + + return 0; +} +EXPORT_SYMBOL_GPL(rt5682_sel_asrc_clk_src); + +static int rt5682_button_detect(struct snd_soc_component *component) +{ + int btn_type, val; + + val = snd_soc_component_read32(component, RT5682_4BTN_IL_CMD_1); + btn_type = val & 0xfff0; + snd_soc_component_write(component, RT5682_4BTN_IL_CMD_1, val); + pr_debug("%s btn_type=%x\n", __func__, btn_type); + + return btn_type; +} + +static void rt5682_enable_push_button_irq(struct snd_soc_component *component, + bool enable) +{ + if (enable) { + snd_soc_component_update_bits(component, RT5682_SAR_IL_CMD_1, + RT5682_SAR_BUTT_DET_MASK, RT5682_SAR_BUTT_DET_EN); + snd_soc_component_update_bits(component, RT5682_SAR_IL_CMD_13, + RT5682_SAR_SOUR_MASK, RT5682_SAR_SOUR_BTN); + snd_soc_component_write(component, RT5682_IL_CMD_1, 0x0040); + snd_soc_component_update_bits(component, RT5682_4BTN_IL_CMD_2, + RT5682_4BTN_IL_MASK | RT5682_4BTN_IL_RST_MASK, + RT5682_4BTN_IL_EN | RT5682_4BTN_IL_NOR); + snd_soc_component_update_bits(component, RT5682_IRQ_CTRL_3, + RT5682_IL_IRQ_MASK, RT5682_IL_IRQ_EN); + } else { + snd_soc_component_update_bits(component, RT5682_IRQ_CTRL_3, + RT5682_IL_IRQ_MASK, RT5682_IL_IRQ_DIS); + snd_soc_component_update_bits(component, RT5682_SAR_IL_CMD_1, + RT5682_SAR_BUTT_DET_MASK, RT5682_SAR_BUTT_DET_DIS); + snd_soc_component_update_bits(component, RT5682_4BTN_IL_CMD_2, + RT5682_4BTN_IL_MASK, RT5682_4BTN_IL_DIS); + snd_soc_component_update_bits(component, RT5682_4BTN_IL_CMD_2, + RT5682_4BTN_IL_RST_MASK, RT5682_4BTN_IL_RST); + snd_soc_component_update_bits(component, RT5682_SAR_IL_CMD_13, + RT5682_SAR_SOUR_MASK, RT5682_SAR_SOUR_TYPE); + } +} + +/** + * rt5682_headset_detect - Detect headset. + * @component: SoC audio component device. + * @jack_insert: Jack insert or not. + * + * Detect whether is headset or not when jack inserted. + * + * Returns detect status. + */ +static int rt5682_headset_detect(struct snd_soc_component *component, + int jack_insert) +{ + struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component); + struct snd_soc_dapm_context *dapm = + snd_soc_component_get_dapm(component); + unsigned int val, count; + + if (jack_insert) { + snd_soc_dapm_force_enable_pin(dapm, "CBJ Power"); + snd_soc_dapm_sync(dapm); + snd_soc_component_update_bits(component, RT5682_CBJ_CTRL_1, + RT5682_TRIG_JD_MASK, RT5682_TRIG_JD_HIGH); + + count = 0; + val = snd_soc_component_read32(component, RT5682_CBJ_CTRL_2) + & RT5682_JACK_TYPE_MASK; + while (val == 0 && count < 50) { + usleep_range(10000, 15000); + val = snd_soc_component_read32(component, + RT5682_CBJ_CTRL_2) & RT5682_JACK_TYPE_MASK; + count++; + } + + switch (val) { + case 0x1: + case 0x2: + rt5682->jack_type = SND_JACK_HEADSET; + rt5682_enable_push_button_irq(component, true); + break; + default: + rt5682->jack_type = SND_JACK_HEADPHONE; + } + + } else { + rt5682_enable_push_button_irq(component, false); + snd_soc_component_update_bits(component, RT5682_CBJ_CTRL_1, + RT5682_TRIG_JD_MASK, RT5682_TRIG_JD_LOW); + snd_soc_dapm_disable_pin(dapm, "CBJ Power"); + snd_soc_dapm_sync(dapm); + + rt5682->jack_type = 0; + } + + dev_dbg(component->dev, "jack_type = %d\n", rt5682->jack_type); + return rt5682->jack_type; +} + +static irqreturn_t rt5682_irq(int irq, void *data) +{ + struct rt5682_priv *rt5682 = data; + + mod_delayed_work(system_power_efficient_wq, + &rt5682->jack_detect_work, msecs_to_jiffies(250)); + + return IRQ_HANDLED; +} + +static void rt5682_jd_check_handler(struct work_struct *work) +{ + struct rt5682_priv *rt5682 = container_of(work, struct rt5682_priv, + jd_check_work.work); + + if (snd_soc_component_read32(rt5682->component, RT5682_AJD1_CTRL) + & RT5682_JDH_RS_MASK) { + /* jack out */ + rt5682->jack_type = rt5682_headset_detect(rt5682->component, 0); + + snd_soc_jack_report(rt5682->hs_jack, rt5682->jack_type, + SND_JACK_HEADSET | + SND_JACK_BTN_0 | SND_JACK_BTN_1 | + SND_JACK_BTN_2 | SND_JACK_BTN_3); + } else { + schedule_delayed_work(&rt5682->jd_check_work, 500); + } +} + +static int rt5682_set_jack_detect(struct snd_soc_component *component, + struct snd_soc_jack *hs_jack, void *data) +{ + struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component); + + switch (rt5682->pdata.jd_src) { + case RT5682_JD1: + snd_soc_component_update_bits(component, RT5682_CBJ_CTRL_2, + RT5682_EXT_JD_SRC, RT5682_EXT_JD_SRC_MANUAL); + snd_soc_component_write(component, RT5682_CBJ_CTRL_1, 0xd042); + snd_soc_component_update_bits(component, RT5682_CBJ_CTRL_3, + RT5682_CBJ_IN_BUF_EN, RT5682_CBJ_IN_BUF_EN); + snd_soc_component_update_bits(component, RT5682_SAR_IL_CMD_1, + RT5682_SAR_POW_MASK, RT5682_SAR_POW_EN); + regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1, + RT5682_GP1_PIN_MASK, RT5682_GP1_PIN_IRQ); + regmap_update_bits(rt5682->regmap, RT5682_RC_CLK_CTRL, + RT5682_POW_IRQ | RT5682_POW_JDH | + RT5682_POW_ANA, RT5682_POW_IRQ | + RT5682_POW_JDH | RT5682_POW_ANA); + regmap_update_bits(rt5682->regmap, RT5682_PWR_ANLG_2, + RT5682_PWR_JDH | RT5682_PWR_JDL, + RT5682_PWR_JDH | RT5682_PWR_JDL); + regmap_update_bits(rt5682->regmap, RT5682_IRQ_CTRL_2, + RT5682_JD1_EN_MASK | RT5682_JD1_POL_MASK, + RT5682_JD1_EN | RT5682_JD1_POL_NOR); + mod_delayed_work(system_power_efficient_wq, + &rt5682->jack_detect_work, msecs_to_jiffies(250)); + break; + + case RT5682_JD_NULL: + regmap_update_bits(rt5682->regmap, RT5682_IRQ_CTRL_2, + RT5682_JD1_EN_MASK, RT5682_JD1_DIS); + regmap_update_bits(rt5682->regmap, RT5682_RC_CLK_CTRL, + RT5682_POW_JDH | RT5682_POW_JDL, 0); + break; + + default: + dev_warn(component->dev, "Wrong JD source\n"); + break; + } + + rt5682->hs_jack = hs_jack; + + return 0; +} + +static void rt5682_jack_detect_handler(struct work_struct *work) +{ + struct rt5682_priv *rt5682 = + container_of(work, struct rt5682_priv, jack_detect_work.work); + int val, btn_type; + + while (!rt5682->component) + usleep_range(10000, 15000); + + while (!rt5682->component->card->instantiated) + usleep_range(10000, 15000); + + mutex_lock(&rt5682->calibrate_mutex); + + val = snd_soc_component_read32(rt5682->component, RT5682_AJD1_CTRL) + & RT5682_JDH_RS_MASK; + if (!val) { + /* jack in */ + if (rt5682->jack_type == 0) { + /* jack was out, report jack type */ + rt5682->jack_type = + rt5682_headset_detect(rt5682->component, 1); + } else { + /* jack is already in, report button event */ + rt5682->jack_type = SND_JACK_HEADSET; + btn_type = rt5682_button_detect(rt5682->component); + /** + * rt5682 can report three kinds of button behavior, + * one click, double click and hold. However, + * currently we will report button pressed/released + * event. So all the three button behaviors are + * treated as button pressed. + */ + switch (btn_type) { + case 0x8000: + case 0x4000: + case 0x2000: + rt5682->jack_type |= SND_JACK_BTN_0; + break; + case 0x1000: + case 0x0800: + case 0x0400: + rt5682->jack_type |= SND_JACK_BTN_1; + break; + case 0x0200: + case 0x0100: + case 0x0080: + rt5682->jack_type |= SND_JACK_BTN_2; + break; + case 0x0040: + case 0x0020: + case 0x0010: + rt5682->jack_type |= SND_JACK_BTN_3; + break; + case 0x0000: /* unpressed */ + break; + default: + btn_type = 0; + dev_err(rt5682->component->dev, + "Unexpected button code 0x%04x\n", + btn_type); + break; + } + } + } else { + /* jack out */ + rt5682->jack_type = rt5682_headset_detect(rt5682->component, 0); + } + + snd_soc_jack_report(rt5682->hs_jack, rt5682->jack_type, + SND_JACK_HEADSET | + SND_JACK_BTN_0 | SND_JACK_BTN_1 | + SND_JACK_BTN_2 | SND_JACK_BTN_3); + + if (rt5682->jack_type & (SND_JACK_BTN_0 | SND_JACK_BTN_1 | + SND_JACK_BTN_2 | SND_JACK_BTN_3)) + schedule_delayed_work(&rt5682->jd_check_work, 0); + else + cancel_delayed_work_sync(&rt5682->jd_check_work); + + mutex_unlock(&rt5682->calibrate_mutex); +} + +static const struct snd_kcontrol_new rt5682_snd_controls[] = { + /* Headphone Output Volume */ + SOC_DOUBLE_R_TLV("Headphone Playback Volume", RT5682_HPL_GAIN, + RT5682_HPR_GAIN, RT5682_G_HP_SFT, 15, 1, hp_vol_tlv), + + /* DAC Digital Volume */ + SOC_DOUBLE_TLV("DAC1 Playback Volume", RT5682_DAC1_DIG_VOL, + RT5682_L_VOL_SFT, RT5682_R_VOL_SFT, 175, 0, dac_vol_tlv), + + /* IN Boost Volume */ + SOC_SINGLE_TLV("CBJ Boost Volume", RT5682_CBJ_BST_CTRL, + RT5682_BST_CBJ_SFT, 8, 0, bst_tlv), + + /* ADC Digital Volume Control */ + SOC_DOUBLE("STO1 ADC Capture Switch", RT5682_STO1_ADC_DIG_VOL, + RT5682_L_MUTE_SFT, RT5682_R_MUTE_SFT, 1, 1), + SOC_DOUBLE_TLV("STO1 ADC Capture Volume", RT5682_STO1_ADC_DIG_VOL, + RT5682_L_VOL_SFT, RT5682_R_VOL_SFT, 127, 0, adc_vol_tlv), + + /* ADC Boost Volume Control */ + SOC_DOUBLE_TLV("STO1 ADC Boost Gain Volume", RT5682_STO1_ADC_BOOST, + RT5682_STO1_ADC_L_BST_SFT, RT5682_STO1_ADC_R_BST_SFT, + 3, 0, adc_bst_tlv), +}; + + +static int rt5682_div_sel(struct rt5682_priv *rt5682, + int target, const int div[], int size) +{ + int i; + + if (rt5682->sysclk < target) { + pr_err("sysclk rate %d is too low\n", + rt5682->sysclk); + return 0; + } + + for (i = 0; i < size - 1; i++) { + pr_info("div[%d]=%d\n", i, div[i]); + if (target * div[i] == rt5682->sysclk) + return i; + if (target * div[i + 1] > rt5682->sysclk) { + pr_err("can't find div for sysclk %d\n", + rt5682->sysclk); + return i; + } + } + + if (target * div[i] < rt5682->sysclk) + pr_err("sysclk rate %d is too high\n", + rt5682->sysclk); + + return size - 1; + +} + +/** + * set_dmic_clk - Set parameter of dmic. + * + * @w: DAPM widget. + * @kcontrol: The kcontrol of this widget. + * @event: Event id. + * + * Choose dmic clock between 1MHz and 3MHz. + * It is better for clock to approximate 3MHz. + */ +static int set_dmic_clk(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = + snd_soc_dapm_to_component(w->dapm); + struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component); + int idx = -EINVAL; + static const int div[] = {2, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128}; + + idx = rt5682_div_sel(rt5682, 1500000, div, ARRAY_SIZE(div)); + + snd_soc_component_update_bits(component, RT5682_DMIC_CTRL_1, + RT5682_DMIC_CLK_MASK, idx << RT5682_DMIC_CLK_SFT); + + return 0; +} + +static int set_filter_clk(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = + snd_soc_dapm_to_component(w->dapm); + struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component); + int ref, val, reg, sft, mask, idx = -EINVAL; + static const int div_f[] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32, 48}; + static const int div_o[] = {1, 2, 4, 6, 8, 12, 16, 24, 32, 48}; + + val = snd_soc_component_read32(component, RT5682_GPIO_CTRL_1) & + RT5682_GP4_PIN_MASK; + if (w->shift == RT5682_PWR_ADC_S1F_BIT && + val == RT5682_GP4_PIN_ADCDAT2) + ref = 256 * rt5682->lrck[RT5682_AIF2]; + else + ref = 256 * rt5682->lrck[RT5682_AIF1]; + + idx = rt5682_div_sel(rt5682, ref, div_f, ARRAY_SIZE(div_f)); + + if (w->shift == RT5682_PWR_ADC_S1F_BIT) { + reg = RT5682_PLL_TRACK_3; + sft = RT5682_ADC_OSR_SFT; + mask = RT5682_ADC_OSR_MASK; + } else { + reg = RT5682_PLL_TRACK_2; + sft = RT5682_DAC_OSR_SFT; + mask = RT5682_DAC_OSR_MASK; + } + + snd_soc_component_update_bits(component, reg, + RT5682_FILTER_CLK_DIV_MASK, idx << RT5682_FILTER_CLK_DIV_SFT); + + /* select over sample rate */ + for (idx = 0; idx < ARRAY_SIZE(div_o); idx++) { + if (rt5682->sysclk <= 12288000 * div_o[idx]) + break; + } + + snd_soc_component_update_bits(component, RT5682_ADDA_CLK_1, + mask, idx << sft); + + return 0; +} + +static int is_sys_clk_from_pll1(struct snd_soc_dapm_widget *w, + struct snd_soc_dapm_widget *sink) +{ + unsigned int val; + struct snd_soc_component *component = + snd_soc_dapm_to_component(w->dapm); + + val = snd_soc_component_read32(component, RT5682_GLB_CLK); + val &= RT5682_SCLK_SRC_MASK; + if (val == RT5682_SCLK_SRC_PLL1) + return 1; + else + return 0; +} + +static int is_using_asrc(struct snd_soc_dapm_widget *w, + struct snd_soc_dapm_widget *sink) +{ + unsigned int reg, shift, val; + struct snd_soc_component *component = + snd_soc_dapm_to_component(w->dapm); + + switch (w->shift) { + case RT5682_ADC_STO1_ASRC_SFT: + reg = RT5682_PLL_TRACK_3; + shift = RT5682_FILTER_CLK_SEL_SFT; + break; + case RT5682_DAC_STO1_ASRC_SFT: + reg = RT5682_PLL_TRACK_2; + shift = RT5682_FILTER_CLK_SEL_SFT; + break; + default: + return 0; + } + + val = (snd_soc_component_read32(component, reg) >> shift) & 0xf; + switch (val) { + case RT5682_CLK_SEL_I2S1_ASRC: + case RT5682_CLK_SEL_I2S2_ASRC: + return 1; + default: + return 0; + } + +} + +/* Digital Mixer */ +static const struct snd_kcontrol_new rt5682_sto1_adc_l_mix[] = { + SOC_DAPM_SINGLE("ADC1 Switch", RT5682_STO1_ADC_MIXER, + RT5682_M_STO1_ADC_L1_SFT, 1, 1), + SOC_DAPM_SINGLE("ADC2 Switch", RT5682_STO1_ADC_MIXER, + RT5682_M_STO1_ADC_L2_SFT, 1, 1), +}; + +static const struct snd_kcontrol_new rt5682_sto1_adc_r_mix[] = { + SOC_DAPM_SINGLE("ADC1 Switch", RT5682_STO1_ADC_MIXER, + RT5682_M_STO1_ADC_R1_SFT, 1, 1), + SOC_DAPM_SINGLE("ADC2 Switch", RT5682_STO1_ADC_MIXER, + RT5682_M_STO1_ADC_R2_SFT, 1, 1), +}; + +static const struct snd_kcontrol_new rt5682_dac_l_mix[] = { + SOC_DAPM_SINGLE("Stereo ADC Switch", RT5682_AD_DA_MIXER, + RT5682_M_ADCMIX_L_SFT, 1, 1), + SOC_DAPM_SINGLE("DAC1 Switch", RT5682_AD_DA_MIXER, + RT5682_M_DAC1_L_SFT, 1, 1), +}; + +static const struct snd_kcontrol_new rt5682_dac_r_mix[] = { + SOC_DAPM_SINGLE("Stereo ADC Switch", RT5682_AD_DA_MIXER, + RT5682_M_ADCMIX_R_SFT, 1, 1), + SOC_DAPM_SINGLE("DAC1 Switch", RT5682_AD_DA_MIXER, + RT5682_M_DAC1_R_SFT, 1, 1), +}; + +static const struct snd_kcontrol_new rt5682_sto1_dac_l_mix[] = { + SOC_DAPM_SINGLE("DAC L1 Switch", RT5682_STO1_DAC_MIXER, + RT5682_M_DAC_L1_STO_L_SFT, 1, 1), + SOC_DAPM_SINGLE("DAC R1 Switch", RT5682_STO1_DAC_MIXER, + RT5682_M_DAC_R1_STO_L_SFT, 1, 1), +}; + +static const struct snd_kcontrol_new rt5682_sto1_dac_r_mix[] = { + SOC_DAPM_SINGLE("DAC L1 Switch", RT5682_STO1_DAC_MIXER, + RT5682_M_DAC_L1_STO_R_SFT, 1, 1), + SOC_DAPM_SINGLE("DAC R1 Switch", RT5682_STO1_DAC_MIXER, + RT5682_M_DAC_R1_STO_R_SFT, 1, 1), +}; + +/* Analog Input Mixer */ +static const struct snd_kcontrol_new rt5682_rec1_l_mix[] = { + SOC_DAPM_SINGLE("CBJ Switch", RT5682_REC_MIXER, + RT5682_M_CBJ_RM1_L_SFT, 1, 1), +}; + +/* STO1 ADC1 Source */ +/* MX-26 [13] [5] */ +static const char * const rt5682_sto1_adc1_src[] = { + "DAC MIX", "ADC" +}; + +static SOC_ENUM_SINGLE_DECL( + rt5682_sto1_adc1l_enum, RT5682_STO1_ADC_MIXER, + RT5682_STO1_ADC1L_SRC_SFT, rt5682_sto1_adc1_src); + +static const struct snd_kcontrol_new rt5682_sto1_adc1l_mux = + SOC_DAPM_ENUM("Stereo1 ADC1L Source", rt5682_sto1_adc1l_enum); + +static SOC_ENUM_SINGLE_DECL( + rt5682_sto1_adc1r_enum, RT5682_STO1_ADC_MIXER, + RT5682_STO1_ADC1R_SRC_SFT, rt5682_sto1_adc1_src); + +static const struct snd_kcontrol_new rt5682_sto1_adc1r_mux = + SOC_DAPM_ENUM("Stereo1 ADC1L Source", rt5682_sto1_adc1r_enum); + +/* STO1 ADC Source */ +/* MX-26 [11:10] [3:2] */ +static const char * const rt5682_sto1_adc_src[] = { + "ADC1 L", "ADC1 R" +}; + +static SOC_ENUM_SINGLE_DECL( + rt5682_sto1_adcl_enum, RT5682_STO1_ADC_MIXER, + RT5682_STO1_ADCL_SRC_SFT, rt5682_sto1_adc_src); + +static const struct snd_kcontrol_new rt5682_sto1_adcl_mux = + SOC_DAPM_ENUM("Stereo1 ADCL Source", rt5682_sto1_adcl_enum); + +static SOC_ENUM_SINGLE_DECL( + rt5682_sto1_adcr_enum, RT5682_STO1_ADC_MIXER, + RT5682_STO1_ADCR_SRC_SFT, rt5682_sto1_adc_src); + +static const struct snd_kcontrol_new rt5682_sto1_adcr_mux = + SOC_DAPM_ENUM("Stereo1 ADCR Source", rt5682_sto1_adcr_enum); + +/* STO1 ADC2 Source */ +/* MX-26 [12] [4] */ +static const char * const rt5682_sto1_adc2_src[] = { + "DAC MIX", "DMIC" +}; + +static SOC_ENUM_SINGLE_DECL( + rt5682_sto1_adc2l_enum, RT5682_STO1_ADC_MIXER, + RT5682_STO1_ADC2L_SRC_SFT, rt5682_sto1_adc2_src); + +static const struct snd_kcontrol_new rt5682_sto1_adc2l_mux = + SOC_DAPM_ENUM("Stereo1 ADC2L Source", rt5682_sto1_adc2l_enum); + +static SOC_ENUM_SINGLE_DECL( + rt5682_sto1_adc2r_enum, RT5682_STO1_ADC_MIXER, + RT5682_STO1_ADC2R_SRC_SFT, rt5682_sto1_adc2_src); + +static const struct snd_kcontrol_new rt5682_sto1_adc2r_mux = + SOC_DAPM_ENUM("Stereo1 ADC2R Source", rt5682_sto1_adc2r_enum); + +/* MX-79 [6:4] I2S1 ADC data location */ +static const unsigned int rt5682_if1_adc_slot_values[] = { + 0, + 2, + 4, + 6, +}; + +static const char * const rt5682_if1_adc_slot_src[] = { + "Slot 0", "Slot 2", "Slot 4", "Slot 6" +}; + +static SOC_VALUE_ENUM_SINGLE_DECL(rt5682_if1_adc_slot_enum, + RT5682_TDM_CTRL, RT5682_TDM_ADC_LCA_SFT, RT5682_TDM_ADC_LCA_MASK, + rt5682_if1_adc_slot_src, rt5682_if1_adc_slot_values); + +static const struct snd_kcontrol_new rt5682_if1_adc_slot_mux = + SOC_DAPM_ENUM("IF1 ADC Slot location", rt5682_if1_adc_slot_enum); + +/* Analog DAC L1 Source, Analog DAC R1 Source*/ +/* MX-2B [4], MX-2B [0]*/ +static const char * const rt5682_alg_dac1_src[] = { + "Stereo1 DAC Mixer", "DAC1" +}; + +static SOC_ENUM_SINGLE_DECL( + rt5682_alg_dac_l1_enum, RT5682_A_DAC1_MUX, + RT5682_A_DACL1_SFT, rt5682_alg_dac1_src); + +static const struct snd_kcontrol_new rt5682_alg_dac_l1_mux = + SOC_DAPM_ENUM("Analog DAC L1 Source", rt5682_alg_dac_l1_enum); + +static SOC_ENUM_SINGLE_DECL( + rt5682_alg_dac_r1_enum, RT5682_A_DAC1_MUX, + RT5682_A_DACR1_SFT, rt5682_alg_dac1_src); + +static const struct snd_kcontrol_new rt5682_alg_dac_r1_mux = + SOC_DAPM_ENUM("Analog DAC R1 Source", rt5682_alg_dac_r1_enum); + +/* Out Switch */ +static const struct snd_kcontrol_new hpol_switch = + SOC_DAPM_SINGLE_AUTODISABLE("Switch", RT5682_HP_CTRL_1, + RT5682_L_MUTE_SFT, 1, 1); +static const struct snd_kcontrol_new hpor_switch = + SOC_DAPM_SINGLE_AUTODISABLE("Switch", RT5682_HP_CTRL_1, + RT5682_R_MUTE_SFT, 1, 1); + +static int rt5682_hp_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = + snd_soc_dapm_to_component(w->dapm); + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + snd_soc_component_write(component, + RT5682_HP_LOGIC_CTRL_2, 0x0012); + snd_soc_component_write(component, + RT5682_HP_CTRL_2, 0x6000); + snd_soc_component_update_bits(component, RT5682_STO_NG2_CTRL_1, + RT5682_NG2_EN_MASK, RT5682_NG2_EN); + snd_soc_component_update_bits(component, + RT5682_DEPOP_1, 0x60, 0x60); + break; + + case SND_SOC_DAPM_POST_PMD: + snd_soc_component_update_bits(component, + RT5682_DEPOP_1, 0x60, 0x0); + snd_soc_component_write(component, + RT5682_HP_CTRL_2, 0x0000); + break; + + default: + return 0; + } + + return 0; + +} + +static int set_dmic_power(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + switch (event) { + case SND_SOC_DAPM_POST_PMU: + /*Add delay to avoid pop noise*/ + msleep(150); + break; + + default: + return 0; + } + + return 0; +} + +static int rt5655_set_verf(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = + snd_soc_dapm_to_component(w->dapm); + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + switch (w->shift) { + case RT5682_PWR_VREF1_BIT: + snd_soc_component_update_bits(component, + RT5682_PWR_ANLG_1, RT5682_PWR_FV1, 0); + break; + + case RT5682_PWR_VREF2_BIT: + snd_soc_component_update_bits(component, + RT5682_PWR_ANLG_1, RT5682_PWR_FV2, 0); + break; + + default: + break; + } + break; + + case SND_SOC_DAPM_POST_PMU: + usleep_range(15000, 20000); + switch (w->shift) { + case RT5682_PWR_VREF1_BIT: + snd_soc_component_update_bits(component, + RT5682_PWR_ANLG_1, RT5682_PWR_FV1, + RT5682_PWR_FV1); + break; + + case RT5682_PWR_VREF2_BIT: + snd_soc_component_update_bits(component, + RT5682_PWR_ANLG_1, RT5682_PWR_FV2, + RT5682_PWR_FV2); + break; + + default: + break; + } + break; + + default: + return 0; + } + + return 0; +} + +static const unsigned int rt5682_adcdat_pin_values[] = { + 1, + 3, +}; + +static const char * const rt5682_adcdat_pin_select[] = { + "ADCDAT1", + "ADCDAT2", +}; + +static SOC_VALUE_ENUM_SINGLE_DECL(rt5682_adcdat_pin_enum, + RT5682_GPIO_CTRL_1, RT5682_GP4_PIN_SFT, RT5682_GP4_PIN_MASK, + rt5682_adcdat_pin_select, rt5682_adcdat_pin_values); + +static const struct snd_kcontrol_new rt5682_adcdat_pin_ctrl = + SOC_DAPM_ENUM("ADCDAT", rt5682_adcdat_pin_enum); + +static const struct snd_soc_dapm_widget rt5682_dapm_widgets[] = { + SND_SOC_DAPM_SUPPLY("LDO2", RT5682_PWR_ANLG_3, RT5682_PWR_LDO2_BIT, + 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("PLL1", RT5682_PWR_ANLG_3, RT5682_PWR_PLL_BIT, + 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("PLL2B", RT5682_PWR_ANLG_3, RT5682_PWR_PLL2B_BIT, + 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("PLL2F", RT5682_PWR_ANLG_3, RT5682_PWR_PLL2F_BIT, + 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("Vref1", RT5682_PWR_ANLG_1, RT5682_PWR_VREF1_BIT, 0, + rt5655_set_verf, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU), + SND_SOC_DAPM_SUPPLY("Vref2", RT5682_PWR_ANLG_1, RT5682_PWR_VREF2_BIT, 0, + rt5655_set_verf, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU), + + /* ASRC */ + SND_SOC_DAPM_SUPPLY_S("DAC STO1 ASRC", 1, RT5682_PLL_TRACK_1, + RT5682_DAC_STO1_ASRC_SFT, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY_S("ADC STO1 ASRC", 1, RT5682_PLL_TRACK_1, + RT5682_ADC_STO1_ASRC_SFT, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY_S("AD ASRC", 1, RT5682_PLL_TRACK_1, + RT5682_AD_ASRC_SFT, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY_S("DA ASRC", 1, RT5682_PLL_TRACK_1, + RT5682_DA_ASRC_SFT, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY_S("DMIC ASRC", 1, RT5682_PLL_TRACK_1, + RT5682_DMIC_ASRC_SFT, 0, NULL, 0), + + /* Input Side */ + SND_SOC_DAPM_SUPPLY("MICBIAS1", RT5682_PWR_ANLG_2, RT5682_PWR_MB1_BIT, + 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("MICBIAS2", RT5682_PWR_ANLG_2, RT5682_PWR_MB2_BIT, + 0, NULL, 0), + + /* Input Lines */ + SND_SOC_DAPM_INPUT("DMIC L1"), + SND_SOC_DAPM_INPUT("DMIC R1"), + + SND_SOC_DAPM_INPUT("IN1P"), + + SND_SOC_DAPM_SUPPLY("DMIC CLK", SND_SOC_NOPM, 0, 0, + set_dmic_clk, SND_SOC_DAPM_PRE_PMU), + SND_SOC_DAPM_SUPPLY("DMIC1 Power", RT5682_DMIC_CTRL_1, + RT5682_DMIC_1_EN_SFT, 0, set_dmic_power, SND_SOC_DAPM_POST_PMU), + + /* Boost */ + SND_SOC_DAPM_PGA("BST1 CBJ", SND_SOC_NOPM, + 0, 0, NULL, 0), + + SND_SOC_DAPM_SUPPLY("CBJ Power", RT5682_PWR_ANLG_3, + RT5682_PWR_CBJ_BIT, 0, NULL, 0), + + /* REC Mixer */ + SND_SOC_DAPM_MIXER("RECMIX1L", SND_SOC_NOPM, 0, 0, rt5682_rec1_l_mix, + ARRAY_SIZE(rt5682_rec1_l_mix)), + SND_SOC_DAPM_SUPPLY("RECMIX1L Power", RT5682_PWR_ANLG_2, + RT5682_PWR_RM1_L_BIT, 0, NULL, 0), + + /* ADCs */ + SND_SOC_DAPM_ADC("ADC1 L", NULL, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_ADC("ADC1 R", NULL, SND_SOC_NOPM, 0, 0), + + SND_SOC_DAPM_SUPPLY("ADC1 L Power", RT5682_PWR_DIG_1, + RT5682_PWR_ADC_L1_BIT, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("ADC1 R Power", RT5682_PWR_DIG_1, + RT5682_PWR_ADC_R1_BIT, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("ADC1 clock", RT5682_CHOP_ADC, + RT5682_CKGEN_ADC1_SFT, 0, NULL, 0), + + /* ADC Mux */ + SND_SOC_DAPM_MUX("Stereo1 ADC L1 Mux", SND_SOC_NOPM, 0, 0, + &rt5682_sto1_adc1l_mux), + SND_SOC_DAPM_MUX("Stereo1 ADC R1 Mux", SND_SOC_NOPM, 0, 0, + &rt5682_sto1_adc1r_mux), + SND_SOC_DAPM_MUX("Stereo1 ADC L2 Mux", SND_SOC_NOPM, 0, 0, + &rt5682_sto1_adc2l_mux), + SND_SOC_DAPM_MUX("Stereo1 ADC R2 Mux", SND_SOC_NOPM, 0, 0, + &rt5682_sto1_adc2r_mux), + SND_SOC_DAPM_MUX("Stereo1 ADC L Mux", SND_SOC_NOPM, 0, 0, + &rt5682_sto1_adcl_mux), + SND_SOC_DAPM_MUX("Stereo1 ADC R Mux", SND_SOC_NOPM, 0, 0, + &rt5682_sto1_adcr_mux), + SND_SOC_DAPM_MUX("IF1_ADC Mux", SND_SOC_NOPM, 0, 0, + &rt5682_if1_adc_slot_mux), + + /* ADC Mixer */ + SND_SOC_DAPM_SUPPLY("ADC Stereo1 Filter", RT5682_PWR_DIG_2, + RT5682_PWR_ADC_S1F_BIT, 0, set_filter_clk, + SND_SOC_DAPM_PRE_PMU), + SND_SOC_DAPM_MIXER("Stereo1 ADC MIXL", RT5682_STO1_ADC_DIG_VOL, + RT5682_L_MUTE_SFT, 1, rt5682_sto1_adc_l_mix, + ARRAY_SIZE(rt5682_sto1_adc_l_mix)), + SND_SOC_DAPM_MIXER("Stereo1 ADC MIXR", RT5682_STO1_ADC_DIG_VOL, + RT5682_R_MUTE_SFT, 1, rt5682_sto1_adc_r_mix, + ARRAY_SIZE(rt5682_sto1_adc_r_mix)), + + /* ADC PGA */ + SND_SOC_DAPM_PGA("Stereo1 ADC MIX", SND_SOC_NOPM, 0, 0, NULL, 0), + + /* Digital Interface */ + SND_SOC_DAPM_SUPPLY("I2S1", RT5682_PWR_DIG_1, RT5682_PWR_I2S1_BIT, + 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("I2S2", RT5682_PWR_DIG_1, RT5682_PWR_I2S2_BIT, + 0, NULL, 0), + SND_SOC_DAPM_PGA("IF1 DAC1", SND_SOC_NOPM, 0, 0, NULL, 0), + SND_SOC_DAPM_PGA("IF1 DAC1 L", SND_SOC_NOPM, 0, 0, NULL, 0), + SND_SOC_DAPM_PGA("IF1 DAC1 R", SND_SOC_NOPM, 0, 0, NULL, 0), + + /* Digital Interface Select */ + SND_SOC_DAPM_MUX("IF1 01 ADC Swap Mux", SND_SOC_NOPM, 0, 0, + &rt5682_if1_01_adc_swap_mux), + SND_SOC_DAPM_MUX("IF1 23 ADC Swap Mux", SND_SOC_NOPM, 0, 0, + &rt5682_if1_23_adc_swap_mux), + SND_SOC_DAPM_MUX("IF1 45 ADC Swap Mux", SND_SOC_NOPM, 0, 0, + &rt5682_if1_45_adc_swap_mux), + SND_SOC_DAPM_MUX("IF1 67 ADC Swap Mux", SND_SOC_NOPM, 0, 0, + &rt5682_if1_67_adc_swap_mux), + SND_SOC_DAPM_MUX("IF2 ADC Swap Mux", SND_SOC_NOPM, 0, 0, + &rt5682_if2_adc_swap_mux), + + SND_SOC_DAPM_MUX("ADCDAT Mux", SND_SOC_NOPM, 0, 0, + &rt5682_adcdat_pin_ctrl), + + /* Audio Interface */ + SND_SOC_DAPM_AIF_OUT("AIF1TX", "AIF1 Capture", 0, + RT5682_I2S1_SDP, RT5682_SEL_ADCDAT_SFT, 1), + SND_SOC_DAPM_AIF_OUT("AIF2TX", "AIF2 Capture", 0, + RT5682_I2S2_SDP, RT5682_I2S2_PIN_CFG_SFT, 1), + SND_SOC_DAPM_AIF_IN("AIF1RX", "AIF1 Playback", 0, SND_SOC_NOPM, 0, 0), + + /* Output Side */ + /* DAC mixer before sound effect */ + SND_SOC_DAPM_MIXER("DAC1 MIXL", SND_SOC_NOPM, 0, 0, + rt5682_dac_l_mix, ARRAY_SIZE(rt5682_dac_l_mix)), + SND_SOC_DAPM_MIXER("DAC1 MIXR", SND_SOC_NOPM, 0, 0, + rt5682_dac_r_mix, ARRAY_SIZE(rt5682_dac_r_mix)), + + /* DAC channel Mux */ + SND_SOC_DAPM_MUX("DAC L1 Source", SND_SOC_NOPM, 0, 0, + &rt5682_alg_dac_l1_mux), + SND_SOC_DAPM_MUX("DAC R1 Source", SND_SOC_NOPM, 0, 0, + &rt5682_alg_dac_r1_mux), + + /* DAC Mixer */ + SND_SOC_DAPM_SUPPLY("DAC Stereo1 Filter", RT5682_PWR_DIG_2, + RT5682_PWR_DAC_S1F_BIT, 0, set_filter_clk, + SND_SOC_DAPM_PRE_PMU), + SND_SOC_DAPM_MIXER("Stereo1 DAC MIXL", SND_SOC_NOPM, 0, 0, + rt5682_sto1_dac_l_mix, ARRAY_SIZE(rt5682_sto1_dac_l_mix)), + SND_SOC_DAPM_MIXER("Stereo1 DAC MIXR", SND_SOC_NOPM, 0, 0, + rt5682_sto1_dac_r_mix, ARRAY_SIZE(rt5682_sto1_dac_r_mix)), + + /* DACs */ + SND_SOC_DAPM_DAC("DAC L1", NULL, RT5682_PWR_DIG_1, + RT5682_PWR_DAC_L1_BIT, 0), + SND_SOC_DAPM_DAC("DAC R1", NULL, RT5682_PWR_DIG_1, + RT5682_PWR_DAC_R1_BIT, 0), + SND_SOC_DAPM_SUPPLY_S("DAC 1 Clock", 3, RT5682_CHOP_DAC, + RT5682_CKGEN_DAC1_SFT, 0, NULL, 0), + + /* HPO */ + SND_SOC_DAPM_PGA_S("HP Amp", 1, SND_SOC_NOPM, 0, 0, rt5682_hp_event, + SND_SOC_DAPM_POST_PMD | SND_SOC_DAPM_PRE_PMU), + + SND_SOC_DAPM_SUPPLY("HP Amp L", RT5682_PWR_ANLG_1, + RT5682_PWR_HA_L_BIT, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("HP Amp R", RT5682_PWR_ANLG_1, + RT5682_PWR_HA_R_BIT, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY_S("Charge Pump", 1, RT5682_DEPOP_1, + RT5682_PUMP_EN_SFT, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY_S("Capless", 2, RT5682_DEPOP_1, + RT5682_CAPLESS_EN_SFT, 0, NULL, 0), + + SND_SOC_DAPM_SWITCH("HPOL Playback", SND_SOC_NOPM, 0, 0, + &hpol_switch), + SND_SOC_DAPM_SWITCH("HPOR Playback", SND_SOC_NOPM, 0, 0, + &hpor_switch), + + /* CLK DET */ + SND_SOC_DAPM_SUPPLY("CLKDET SYS", RT5682_CLK_DET, + RT5682_SYS_CLK_DET_SFT, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("CLKDET PLL1", RT5682_CLK_DET, + RT5682_PLL1_CLK_DET_SFT, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("CLKDET PLL2", RT5682_CLK_DET, + RT5682_PLL2_CLK_DET_SFT, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("CLKDET", RT5682_CLK_DET, + RT5682_POW_CLK_DET_SFT, 0, NULL, 0), + + /* Output Lines */ + SND_SOC_DAPM_OUTPUT("HPOL"), + SND_SOC_DAPM_OUTPUT("HPOR"), + +}; + +static const struct snd_soc_dapm_route rt5682_dapm_routes[] = { + /*PLL*/ + {"ADC Stereo1 Filter", NULL, "PLL1", is_sys_clk_from_pll1}, + {"DAC Stereo1 Filter", NULL, "PLL1", is_sys_clk_from_pll1}, + + /*ASRC*/ + {"ADC Stereo1 Filter", NULL, "ADC STO1 ASRC", is_using_asrc}, + {"DAC Stereo1 Filter", NULL, "DAC STO1 ASRC", is_using_asrc}, + {"ADC STO1 ASRC", NULL, "AD ASRC"}, + {"ADC STO1 ASRC", NULL, "CLKDET"}, + {"DAC STO1 ASRC", NULL, "DA ASRC"}, + {"DAC STO1 ASRC", NULL, "CLKDET"}, + + /*Vref*/ + {"MICBIAS1", NULL, "Vref1"}, + {"MICBIAS1", NULL, "Vref2"}, + {"MICBIAS2", NULL, "Vref1"}, + {"MICBIAS2", NULL, "Vref2"}, + + {"CLKDET SYS", NULL, "CLKDET"}, + + {"IN1P", NULL, "LDO2"}, + + {"BST1 CBJ", NULL, "IN1P"}, + {"BST1 CBJ", NULL, "CBJ Power"}, + {"CBJ Power", NULL, "Vref2"}, + + {"RECMIX1L", "CBJ Switch", "BST1 CBJ"}, + {"RECMIX1L", NULL, "RECMIX1L Power"}, + + {"ADC1 L", NULL, "RECMIX1L"}, + {"ADC1 L", NULL, "ADC1 L Power"}, + {"ADC1 L", NULL, "ADC1 clock"}, + + {"DMIC L1", NULL, "DMIC CLK"}, + {"DMIC L1", NULL, "DMIC1 Power"}, + {"DMIC R1", NULL, "DMIC CLK"}, + {"DMIC R1", NULL, "DMIC1 Power"}, + {"DMIC CLK", NULL, "DMIC ASRC"}, + + {"Stereo1 ADC L Mux", "ADC1 L", "ADC1 L"}, + {"Stereo1 ADC L Mux", "ADC1 R", "ADC1 R"}, + {"Stereo1 ADC R Mux", "ADC1 L", "ADC1 L"}, + {"Stereo1 ADC R Mux", "ADC1 R", "ADC1 R"}, + + {"Stereo1 ADC L1 Mux", "ADC", "Stereo1 ADC L Mux"}, + {"Stereo1 ADC L1 Mux", "DAC MIX", "Stereo1 DAC MIXL"}, + {"Stereo1 ADC L2 Mux", "DMIC", "DMIC L1"}, + {"Stereo1 ADC L2 Mux", "DAC MIX", "Stereo1 DAC MIXL"}, + + {"Stereo1 ADC R1 Mux", "ADC", "Stereo1 ADC R Mux"}, + {"Stereo1 ADC R1 Mux", "DAC MIX", "Stereo1 DAC MIXR"}, + {"Stereo1 ADC R2 Mux", "DMIC", "DMIC R1"}, + {"Stereo1 ADC R2 Mux", "DAC MIX", "Stereo1 DAC MIXR"}, + + {"Stereo1 ADC MIXL", "ADC1 Switch", "Stereo1 ADC L1 Mux"}, + {"Stereo1 ADC MIXL", "ADC2 Switch", "Stereo1 ADC L2 Mux"}, + {"Stereo1 ADC MIXL", NULL, "ADC Stereo1 Filter"}, + + {"Stereo1 ADC MIXR", "ADC1 Switch", "Stereo1 ADC R1 Mux"}, + {"Stereo1 ADC MIXR", "ADC2 Switch", "Stereo1 ADC R2 Mux"}, + {"Stereo1 ADC MIXR", NULL, "ADC Stereo1 Filter"}, + + {"Stereo1 ADC MIX", NULL, "Stereo1 ADC MIXL"}, + {"Stereo1 ADC MIX", NULL, "Stereo1 ADC MIXR"}, + + {"IF1 01 ADC Swap Mux", "L/R", "Stereo1 ADC MIX"}, + {"IF1 01 ADC Swap Mux", "L/L", "Stereo1 ADC MIX"}, + {"IF1 01 ADC Swap Mux", "R/L", "Stereo1 ADC MIX"}, + {"IF1 01 ADC Swap Mux", "R/R", "Stereo1 ADC MIX"}, + {"IF1 23 ADC Swap Mux", "L/R", "Stereo1 ADC MIX"}, + {"IF1 23 ADC Swap Mux", "R/L", "Stereo1 ADC MIX"}, + {"IF1 23 ADC Swap Mux", "L/L", "Stereo1 ADC MIX"}, + {"IF1 23 ADC Swap Mux", "R/R", "Stereo1 ADC MIX"}, + {"IF1 45 ADC Swap Mux", "L/R", "Stereo1 ADC MIX"}, + {"IF1 45 ADC Swap Mux", "R/L", "Stereo1 ADC MIX"}, + {"IF1 45 ADC Swap Mux", "L/L", "Stereo1 ADC MIX"}, + {"IF1 45 ADC Swap Mux", "R/R", "Stereo1 ADC MIX"}, + {"IF1 67 ADC Swap Mux", "L/R", "Stereo1 ADC MIX"}, + {"IF1 67 ADC Swap Mux", "R/L", "Stereo1 ADC MIX"}, + {"IF1 67 ADC Swap Mux", "L/L", "Stereo1 ADC MIX"}, + {"IF1 67 ADC Swap Mux", "R/R", "Stereo1 ADC MIX"}, + + {"IF1_ADC Mux", "Slot 0", "IF1 01 ADC Swap Mux"}, + {"IF1_ADC Mux", "Slot 2", "IF1 23 ADC Swap Mux"}, + {"IF1_ADC Mux", "Slot 4", "IF1 45 ADC Swap Mux"}, + {"IF1_ADC Mux", "Slot 6", "IF1 67 ADC Swap Mux"}, + {"IF1_ADC Mux", NULL, "I2S1"}, + {"ADCDAT Mux", "ADCDAT1", "IF1_ADC Mux"}, + {"AIF1TX", NULL, "ADCDAT Mux"}, + {"IF2 ADC Swap Mux", "L/R", "Stereo1 ADC MIX"}, + {"IF2 ADC Swap Mux", "R/L", "Stereo1 ADC MIX"}, + {"IF2 ADC Swap Mux", "L/L", "Stereo1 ADC MIX"}, + {"IF2 ADC Swap Mux", "R/R", "Stereo1 ADC MIX"}, + {"ADCDAT Mux", "ADCDAT2", "IF2 ADC Swap Mux"}, + {"AIF2TX", NULL, "ADCDAT Mux"}, + + {"IF1 DAC1 L", NULL, "AIF1RX"}, + {"IF1 DAC1 L", NULL, "I2S1"}, + {"IF1 DAC1 L", NULL, "DAC Stereo1 Filter"}, + {"IF1 DAC1 R", NULL, "AIF1RX"}, + {"IF1 DAC1 R", NULL, "I2S1"}, + {"IF1 DAC1 R", NULL, "DAC Stereo1 Filter"}, + + {"DAC1 MIXL", "Stereo ADC Switch", "Stereo1 ADC MIXL"}, + {"DAC1 MIXL", "DAC1 Switch", "IF1 DAC1 L"}, + {"DAC1 MIXR", "Stereo ADC Switch", "Stereo1 ADC MIXR"}, + {"DAC1 MIXR", "DAC1 Switch", "IF1 DAC1 R"}, + + {"Stereo1 DAC MIXL", "DAC L1 Switch", "DAC1 MIXL"}, + {"Stereo1 DAC MIXL", "DAC R1 Switch", "DAC1 MIXR"}, + + {"Stereo1 DAC MIXR", "DAC R1 Switch", "DAC1 MIXR"}, + {"Stereo1 DAC MIXR", "DAC L1 Switch", "DAC1 MIXL"}, + + {"DAC L1 Source", "DAC1", "DAC1 MIXL"}, + {"DAC L1 Source", "Stereo1 DAC Mixer", "Stereo1 DAC MIXL"}, + {"DAC R1 Source", "DAC1", "DAC1 MIXR"}, + {"DAC R1 Source", "Stereo1 DAC Mixer", "Stereo1 DAC MIXR"}, + + {"DAC L1", NULL, "DAC L1 Source"}, + {"DAC R1", NULL, "DAC R1 Source"}, + + {"DAC L1", NULL, "DAC 1 Clock"}, + {"DAC R1", NULL, "DAC 1 Clock"}, + + {"HP Amp", NULL, "DAC L1"}, + {"HP Amp", NULL, "DAC R1"}, + {"HP Amp", NULL, "HP Amp L"}, + {"HP Amp", NULL, "HP Amp R"}, + {"HP Amp", NULL, "Capless"}, + {"HP Amp", NULL, "Charge Pump"}, + {"HP Amp", NULL, "CLKDET SYS"}, + {"HP Amp", NULL, "CBJ Power"}, + {"HP Amp", NULL, "Vref2"}, + {"HPOL Playback", "Switch", "HP Amp"}, + {"HPOR Playback", "Switch", "HP Amp"}, + {"HPOL", NULL, "HPOL Playback"}, + {"HPOR", NULL, "HPOR Playback"}, +}; + +static int rt5682_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask, + unsigned int rx_mask, int slots, int slot_width) +{ + struct snd_soc_component *component = dai->component; + unsigned int cl, val = 0; + + if (tx_mask || rx_mask) + snd_soc_component_update_bits(component, RT5682_TDM_ADDA_CTRL_2, + RT5682_TDM_EN, RT5682_TDM_EN); + else + snd_soc_component_update_bits(component, RT5682_TDM_ADDA_CTRL_2, + RT5682_TDM_EN, 0); + + switch (slots) { + case 4: + val |= RT5682_TDM_TX_CH_4; + val |= RT5682_TDM_RX_CH_4; + break; + case 6: + val |= RT5682_TDM_TX_CH_6; + val |= RT5682_TDM_RX_CH_6; + break; + case 8: + val |= RT5682_TDM_TX_CH_8; + val |= RT5682_TDM_RX_CH_8; + break; + case 2: + break; + default: + return -EINVAL; + } + + snd_soc_component_update_bits(component, RT5682_TDM_CTRL, + RT5682_TDM_TX_CH_MASK | RT5682_TDM_RX_CH_MASK, val); + + switch (slot_width) { + case 8: + if (tx_mask || rx_mask) + return -EINVAL; + cl = RT5682_I2S1_TX_CHL_8 | RT5682_I2S1_RX_CHL_8; + break; + case 16: + val = RT5682_TDM_CL_16; + cl = RT5682_I2S1_TX_CHL_16 | RT5682_I2S1_RX_CHL_16; + break; + case 20: + val = RT5682_TDM_CL_20; + cl = RT5682_I2S1_TX_CHL_20 | RT5682_I2S1_RX_CHL_20; + break; + case 24: + val = RT5682_TDM_CL_24; + cl = RT5682_I2S1_TX_CHL_24 | RT5682_I2S1_RX_CHL_24; + break; + case 32: + val = RT5682_TDM_CL_32; + cl = RT5682_I2S1_TX_CHL_32 | RT5682_I2S1_RX_CHL_32; + break; + default: + return -EINVAL; + } + + snd_soc_component_update_bits(component, RT5682_TDM_TCON_CTRL, + RT5682_TDM_CL_MASK, val); + snd_soc_component_update_bits(component, RT5682_I2S1_SDP, + RT5682_I2S1_TX_CHL_MASK | RT5682_I2S1_RX_CHL_MASK, cl); + + return 0; +} + + +static int rt5682_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component); + unsigned int len_1 = 0, len_2 = 0; + int pre_div, frame_size; + + rt5682->lrck[dai->id] = params_rate(params); + pre_div = rl6231_get_clk_info(rt5682->sysclk, rt5682->lrck[dai->id]); + + frame_size = snd_soc_params_to_frame_size(params); + if (frame_size < 0) { + dev_err(component->dev, "Unsupported frame size: %d\n", + frame_size); + return -EINVAL; + } + + dev_dbg(dai->dev, "lrck is %dHz and pre_div is %d for iis %d\n", + rt5682->lrck[dai->id], pre_div, dai->id); + + switch (params_width(params)) { + case 16: + break; + case 20: + len_1 |= RT5682_I2S1_DL_20; + len_2 |= RT5682_I2S2_DL_20; + break; + case 24: + len_1 |= RT5682_I2S1_DL_24; + len_2 |= RT5682_I2S2_DL_24; + break; + case 32: + len_1 |= RT5682_I2S1_DL_32; + len_2 |= RT5682_I2S2_DL_24; + break; + case 8: + len_1 |= RT5682_I2S2_DL_8; + len_2 |= RT5682_I2S2_DL_8; + break; + default: + return -EINVAL; + } + + switch (dai->id) { + case RT5682_AIF1: + snd_soc_component_update_bits(component, RT5682_I2S1_SDP, + RT5682_I2S1_DL_MASK, len_1); + if (rt5682->master[RT5682_AIF1]) { + snd_soc_component_update_bits(component, + RT5682_ADDA_CLK_1, RT5682_I2S_M_DIV_MASK, + pre_div << RT5682_I2S_M_DIV_SFT); + } + if (params_channels(params) == 1) /* mono mode */ + snd_soc_component_update_bits(component, + RT5682_I2S1_SDP, RT5682_I2S1_MONO_MASK, + RT5682_I2S1_MONO_EN); + else + snd_soc_component_update_bits(component, + RT5682_I2S1_SDP, RT5682_I2S1_MONO_MASK, + RT5682_I2S1_MONO_DIS); + break; + case RT5682_AIF2: + snd_soc_component_update_bits(component, RT5682_I2S2_SDP, + RT5682_I2S2_DL_MASK, len_2); + if (rt5682->master[RT5682_AIF2]) { + snd_soc_component_update_bits(component, + RT5682_I2S_M_CLK_CTRL_1, RT5682_I2S2_M_PD_MASK, + pre_div << RT5682_I2S2_M_PD_SFT); + } + if (params_channels(params) == 1) /* mono mode */ + snd_soc_component_update_bits(component, + RT5682_I2S2_SDP, RT5682_I2S2_MONO_MASK, + RT5682_I2S2_MONO_EN); + else + snd_soc_component_update_bits(component, + RT5682_I2S2_SDP, RT5682_I2S2_MONO_MASK, + RT5682_I2S2_MONO_DIS); + break; + default: + dev_err(component->dev, "Invalid dai->id: %d\n", dai->id); + return -EINVAL; + } + + return 0; +} + +static int rt5682_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt) +{ + struct snd_soc_component *component = dai->component; + struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component); + unsigned int reg_val = 0, tdm_ctrl = 0; + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + rt5682->master[dai->id] = 1; + break; + case SND_SOC_DAIFMT_CBS_CFS: + rt5682->master[dai->id] = 0; + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_IB_NF: + reg_val |= RT5682_I2S_BP_INV; + tdm_ctrl |= RT5682_TDM_S_BP_INV; + break; + case SND_SOC_DAIFMT_NB_IF: + if (dai->id == RT5682_AIF1) + tdm_ctrl |= RT5682_TDM_S_LP_INV | RT5682_TDM_M_BP_INV; + else + return -EINVAL; + break; + case SND_SOC_DAIFMT_IB_IF: + if (dai->id == RT5682_AIF1) + tdm_ctrl |= RT5682_TDM_S_BP_INV | RT5682_TDM_S_LP_INV | + RT5682_TDM_M_BP_INV | RT5682_TDM_M_LP_INV; + else + return -EINVAL; + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + break; + case SND_SOC_DAIFMT_LEFT_J: + reg_val |= RT5682_I2S_DF_LEFT; + tdm_ctrl |= RT5682_TDM_DF_LEFT; + break; + case SND_SOC_DAIFMT_DSP_A: + reg_val |= RT5682_I2S_DF_PCM_A; + tdm_ctrl |= RT5682_TDM_DF_PCM_A; + break; + case SND_SOC_DAIFMT_DSP_B: + reg_val |= RT5682_I2S_DF_PCM_B; + tdm_ctrl |= RT5682_TDM_DF_PCM_B; + break; + default: + return -EINVAL; + } + + switch (dai->id) { + case RT5682_AIF1: + snd_soc_component_update_bits(component, RT5682_I2S1_SDP, + RT5682_I2S_DF_MASK, reg_val); + snd_soc_component_update_bits(component, RT5682_TDM_TCON_CTRL, + RT5682_TDM_MS_MASK | RT5682_TDM_S_BP_MASK | + RT5682_TDM_DF_MASK | RT5682_TDM_M_BP_MASK | + RT5682_TDM_M_LP_MASK | RT5682_TDM_S_LP_MASK, + tdm_ctrl | rt5682->master[dai->id]); + break; + case RT5682_AIF2: + if (rt5682->master[dai->id] == 0) + reg_val |= RT5682_I2S2_MS_S; + snd_soc_component_update_bits(component, RT5682_I2S2_SDP, + RT5682_I2S2_MS_MASK | RT5682_I2S_BP_MASK | + RT5682_I2S_DF_MASK, reg_val); + break; + default: + dev_err(component->dev, "Invalid dai->id: %d\n", dai->id); + return -EINVAL; + } + return 0; +} + +static int rt5682_set_component_sysclk(struct snd_soc_component *component, + int clk_id, int source, unsigned int freq, int dir) +{ + struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component); + unsigned int reg_val = 0, src = 0; + + if (freq == rt5682->sysclk && clk_id == rt5682->sysclk_src) + return 0; + + switch (clk_id) { + case RT5682_SCLK_S_MCLK: + reg_val |= RT5682_SCLK_SRC_MCLK; + src = RT5682_CLK_SRC_MCLK; + break; + case RT5682_SCLK_S_PLL1: + reg_val |= RT5682_SCLK_SRC_PLL1; + src = RT5682_CLK_SRC_PLL1; + break; + case RT5682_SCLK_S_PLL2: + reg_val |= RT5682_SCLK_SRC_PLL2; + src = RT5682_CLK_SRC_PLL2; + break; + case RT5682_SCLK_S_RCCLK: + reg_val |= RT5682_SCLK_SRC_RCCLK; + src = RT5682_CLK_SRC_RCCLK; + break; + default: + dev_err(component->dev, "Invalid clock id (%d)\n", clk_id); + return -EINVAL; + } + snd_soc_component_update_bits(component, RT5682_GLB_CLK, + RT5682_SCLK_SRC_MASK, reg_val); + + if (rt5682->master[RT5682_AIF2]) { + snd_soc_component_update_bits(component, + RT5682_I2S_M_CLK_CTRL_1, RT5682_I2S2_SRC_MASK, + src << RT5682_I2S2_SRC_SFT); + } + + rt5682->sysclk = freq; + rt5682->sysclk_src = clk_id; + + dev_dbg(component->dev, "Sysclk is %dHz and clock id is %d\n", + freq, clk_id); + + return 0; +} + +static int rt5682_set_component_pll(struct snd_soc_component *component, + int pll_id, int source, unsigned int freq_in, + unsigned int freq_out) +{ + struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component); + struct rl6231_pll_code pll_code; + int ret; + + if (source == rt5682->pll_src && freq_in == rt5682->pll_in && + freq_out == rt5682->pll_out) + return 0; + + if (!freq_in || !freq_out) { + dev_dbg(component->dev, "PLL disabled\n"); + + rt5682->pll_in = 0; + rt5682->pll_out = 0; + snd_soc_component_update_bits(component, RT5682_GLB_CLK, + RT5682_SCLK_SRC_MASK, RT5682_SCLK_SRC_MCLK); + return 0; + } + + switch (source) { + case RT5682_PLL1_S_MCLK: + snd_soc_component_update_bits(component, RT5682_GLB_CLK, + RT5682_PLL1_SRC_MASK, RT5682_PLL1_SRC_MCLK); + break; + case RT5682_PLL1_S_BCLK1: + snd_soc_component_update_bits(component, RT5682_GLB_CLK, + RT5682_PLL1_SRC_MASK, RT5682_PLL1_SRC_BCLK1); + break; + default: + dev_err(component->dev, "Unknown PLL Source %d\n", source); + return -EINVAL; + } + + ret = rl6231_pll_calc(freq_in, freq_out, &pll_code); + if (ret < 0) { + dev_err(component->dev, "Unsupport input clock %d\n", freq_in); + return ret; + } + + dev_dbg(component->dev, "bypass=%d m=%d n=%d k=%d\n", + pll_code.m_bp, (pll_code.m_bp ? 0 : pll_code.m_code), + pll_code.n_code, pll_code.k_code); + + snd_soc_component_write(component, RT5682_PLL_CTRL_1, + pll_code.n_code << RT5682_PLL_N_SFT | pll_code.k_code); + snd_soc_component_write(component, RT5682_PLL_CTRL_2, + (pll_code.m_bp ? 0 : pll_code.m_code) << RT5682_PLL_M_SFT | + pll_code.m_bp << RT5682_PLL_M_BP_SFT | RT5682_PLL_RST); + + rt5682->pll_in = freq_in; + rt5682->pll_out = freq_out; + rt5682->pll_src = source; + + return 0; +} + +static int rt5682_set_bclk_ratio(struct snd_soc_dai *dai, unsigned int ratio) +{ + struct snd_soc_component *component = dai->component; + struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component); + + rt5682->bclk[dai->id] = ratio; + + switch (ratio) { + case 64: + snd_soc_component_update_bits(component, RT5682_ADDA_CLK_2, + RT5682_I2S2_BCLK_MS2_MASK, + RT5682_I2S2_BCLK_MS2_64); + break; + case 32: + snd_soc_component_update_bits(component, RT5682_ADDA_CLK_2, + RT5682_I2S2_BCLK_MS2_MASK, + RT5682_I2S2_BCLK_MS2_32); + break; + default: + dev_err(dai->dev, "Invalid bclk ratio %d\n", ratio); + return -EINVAL; + } + + return 0; +} + +static int rt5682_set_bias_level(struct snd_soc_component *component, + enum snd_soc_bias_level level) +{ + struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component); + + switch (level) { + case SND_SOC_BIAS_PREPARE: + regmap_update_bits(rt5682->regmap, RT5682_PWR_ANLG_1, + RT5682_PWR_MB | RT5682_PWR_BG, + RT5682_PWR_MB | RT5682_PWR_BG); + regmap_update_bits(rt5682->regmap, RT5682_PWR_DIG_1, + RT5682_DIG_GATE_CTRL | RT5682_PWR_LDO, + RT5682_DIG_GATE_CTRL | RT5682_PWR_LDO); + break; + + case SND_SOC_BIAS_STANDBY: + regmap_update_bits(rt5682->regmap, RT5682_PWR_ANLG_1, + RT5682_PWR_MB, RT5682_PWR_MB); + regmap_update_bits(rt5682->regmap, RT5682_PWR_DIG_1, + RT5682_DIG_GATE_CTRL, RT5682_DIG_GATE_CTRL); + break; + case SND_SOC_BIAS_OFF: + regmap_update_bits(rt5682->regmap, RT5682_PWR_DIG_1, + RT5682_DIG_GATE_CTRL | RT5682_PWR_LDO, 0); + regmap_update_bits(rt5682->regmap, RT5682_PWR_ANLG_1, + RT5682_PWR_MB | RT5682_PWR_BG, 0); + break; + + default: + break; + } + + return 0; +} + +static int rt5682_probe(struct snd_soc_component *component) +{ + struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component); + + rt5682->component = component; + + return 0; +} + +static void rt5682_remove(struct snd_soc_component *component) +{ + struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component); + + rt5682_reset(rt5682->regmap); +} + +#ifdef CONFIG_PM +static int rt5682_suspend(struct snd_soc_component *component) +{ + struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component); + + regcache_cache_only(rt5682->regmap, true); + regcache_mark_dirty(rt5682->regmap); + return 0; +} + +static int rt5682_resume(struct snd_soc_component *component) +{ + struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component); + + regcache_cache_only(rt5682->regmap, false); + regcache_sync(rt5682->regmap); + + return 0; +} +#else +#define rt5682_suspend NULL +#define rt5682_resume NULL +#endif + +#define RT5682_STEREO_RATES SNDRV_PCM_RATE_8000_192000 +#define RT5682_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S8) + +static const struct snd_soc_dai_ops rt5682_aif1_dai_ops = { + .hw_params = rt5682_hw_params, + .set_fmt = rt5682_set_dai_fmt, + .set_tdm_slot = rt5682_set_tdm_slot, +}; + +static const struct snd_soc_dai_ops rt5682_aif2_dai_ops = { + .hw_params = rt5682_hw_params, + .set_fmt = rt5682_set_dai_fmt, + .set_bclk_ratio = rt5682_set_bclk_ratio, +}; + +static struct snd_soc_dai_driver rt5682_dai[] = { + { + .name = "rt5682-aif1", + .id = RT5682_AIF1, + .playback = { + .stream_name = "AIF1 Playback", + .channels_min = 1, + .channels_max = 2, + .rates = RT5682_STEREO_RATES, + .formats = RT5682_FORMATS, + }, + .capture = { + .stream_name = "AIF1 Capture", + .channels_min = 1, + .channels_max = 2, + .rates = RT5682_STEREO_RATES, + .formats = RT5682_FORMATS, + }, + .ops = &rt5682_aif1_dai_ops, + }, + { + .name = "rt5682-aif2", + .id = RT5682_AIF2, + .capture = { + .stream_name = "AIF2 Capture", + .channels_min = 1, + .channels_max = 2, + .rates = RT5682_STEREO_RATES, + .formats = RT5682_FORMATS, + }, + .ops = &rt5682_aif2_dai_ops, + }, +}; + +static const struct snd_soc_component_driver soc_component_dev_rt5682 = { + .probe = rt5682_probe, + .remove = rt5682_remove, + .suspend = rt5682_suspend, + .resume = rt5682_resume, + .set_bias_level = rt5682_set_bias_level, + .controls = rt5682_snd_controls, + .num_controls = ARRAY_SIZE(rt5682_snd_controls), + .dapm_widgets = rt5682_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(rt5682_dapm_widgets), + .dapm_routes = rt5682_dapm_routes, + .num_dapm_routes = ARRAY_SIZE(rt5682_dapm_routes), + .set_sysclk = rt5682_set_component_sysclk, + .set_pll = rt5682_set_component_pll, + .set_jack = rt5682_set_jack_detect, + .use_pmdown_time = 1, + .endianness = 1, + .non_legacy_dai_naming = 1, +}; + +static const struct regmap_config rt5682_regmap = { + .reg_bits = 16, + .val_bits = 16, + .max_register = RT5682_I2C_MODE, + .volatile_reg = rt5682_volatile_register, + .readable_reg = rt5682_readable_register, + .cache_type = REGCACHE_RBTREE, + .reg_defaults = rt5682_reg, + .num_reg_defaults = ARRAY_SIZE(rt5682_reg), + .use_single_rw = true, +}; + +static const struct i2c_device_id rt5682_i2c_id[] = { + {"rt5682", 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, rt5682_i2c_id); + +static int rt5682_parse_dt(struct rt5682_priv *rt5682, struct device *dev) +{ + + device_property_read_u32(dev, "realtek,dmic1-data-pin", + &rt5682->pdata.dmic1_data_pin); + device_property_read_u32(dev, "realtek,dmic1-clk-pin", + &rt5682->pdata.dmic1_clk_pin); + device_property_read_u32(dev, "realtek,jd-src", + &rt5682->pdata.jd_src); + + rt5682->pdata.ldo1_en = of_get_named_gpio(dev->of_node, + "realtek,ldo1-en-gpios", 0); + + return 0; +} + +static void rt5682_calibrate(struct rt5682_priv *rt5682) +{ + int value, count; + + mutex_lock(&rt5682->calibrate_mutex); + + rt5682_reset(rt5682->regmap); + regmap_write(rt5682->regmap, RT5682_PWR_ANLG_1, 0xa2bf); + usleep_range(15000, 20000); + regmap_write(rt5682->regmap, RT5682_PWR_ANLG_1, 0xf2bf); + regmap_write(rt5682->regmap, RT5682_MICBIAS_2, 0x0380); + regmap_write(rt5682->regmap, RT5682_PWR_DIG_1, 0x8001); + regmap_write(rt5682->regmap, RT5682_TEST_MODE_CTRL_1, 0x0000); + regmap_write(rt5682->regmap, RT5682_STO1_DAC_MIXER, 0x2080); + regmap_write(rt5682->regmap, RT5682_STO1_ADC_MIXER, 0x4040); + regmap_write(rt5682->regmap, RT5682_DEPOP_1, 0x0069); + regmap_write(rt5682->regmap, RT5682_CHOP_DAC, 0x3000); + regmap_write(rt5682->regmap, RT5682_HP_CTRL_2, 0x6000); + regmap_write(rt5682->regmap, RT5682_HP_CHARGE_PUMP_1, 0x0f26); + regmap_write(rt5682->regmap, RT5682_CALIB_ADC_CTRL, 0x7f05); + regmap_write(rt5682->regmap, RT5682_STO1_ADC_MIXER, 0x686c); + regmap_write(rt5682->regmap, RT5682_CAL_REC, 0x0d0d); + regmap_write(rt5682->regmap, RT5682_HP_CALIB_CTRL_9, 0x000f); + regmap_write(rt5682->regmap, RT5682_PWR_DIG_1, 0x8d01); + regmap_write(rt5682->regmap, RT5682_HP_CALIB_CTRL_2, 0x0321); + regmap_write(rt5682->regmap, RT5682_HP_LOGIC_CTRL_2, 0x0004); + regmap_write(rt5682->regmap, RT5682_HP_CALIB_CTRL_1, 0x7c00); + regmap_write(rt5682->regmap, RT5682_HP_CALIB_CTRL_3, 0x06a1); + regmap_write(rt5682->regmap, RT5682_A_DAC1_MUX, 0x0311); + regmap_write(rt5682->regmap, RT5682_RESET_HPF_CTRL, 0x0000); + regmap_write(rt5682->regmap, RT5682_ADC_STO1_HP_CTRL_1, 0x3320); + + regmap_write(rt5682->regmap, RT5682_HP_CALIB_CTRL_1, 0xfc00); + + for (count = 0; count < 60; count++) { + regmap_read(rt5682->regmap, RT5682_HP_CALIB_STA_1, &value); + if (!(value & 0x8000)) + break; + + usleep_range(10000, 10005); + } + + if (count >= 60) + pr_err("HP Calibration Failure\n"); + + /* restore settings */ + regmap_write(rt5682->regmap, RT5682_STO1_ADC_MIXER, 0xc0c4); + regmap_write(rt5682->regmap, RT5682_PWR_DIG_1, 0x0000); + + mutex_unlock(&rt5682->calibrate_mutex); + +} + +static int rt5682_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct rt5682_platform_data *pdata = dev_get_platdata(&i2c->dev); + struct rt5682_priv *rt5682; + int i, ret; + unsigned int val; + + rt5682 = devm_kzalloc(&i2c->dev, sizeof(struct rt5682_priv), + GFP_KERNEL); + + if (rt5682 == NULL) + return -ENOMEM; + + i2c_set_clientdata(i2c, rt5682); + + if (pdata) + rt5682->pdata = *pdata; + else + rt5682_parse_dt(rt5682, &i2c->dev); + + rt5682->regmap = devm_regmap_init_i2c(i2c, &rt5682_regmap); + if (IS_ERR(rt5682->regmap)) { + ret = PTR_ERR(rt5682->regmap); + dev_err(&i2c->dev, "Failed to allocate register map: %d\n", + ret); + return ret; + } + + for (i = 0; i < ARRAY_SIZE(rt5682->supplies); i++) + rt5682->supplies[i].supply = rt5682_supply_names[i]; + + ret = devm_regulator_bulk_get(&i2c->dev, ARRAY_SIZE(rt5682->supplies), + rt5682->supplies); + if (ret != 0) { + dev_err(&i2c->dev, "Failed to request supplies: %d\n", ret); + return ret; + } + + ret = regulator_bulk_enable(ARRAY_SIZE(rt5682->supplies), + rt5682->supplies); + if (ret != 0) { + dev_err(&i2c->dev, "Failed to enable supplies: %d\n", ret); + return ret; + } + + if (gpio_is_valid(rt5682->pdata.ldo1_en)) { + if (devm_gpio_request_one(&i2c->dev, rt5682->pdata.ldo1_en, + GPIOF_OUT_INIT_HIGH, "rt5682")) + dev_err(&i2c->dev, "Fail gpio_request gpio_ldo\n"); + } + + /* Sleep for 300 ms miniumum */ + usleep_range(300000, 350000); + + regmap_write(rt5682->regmap, RT5682_I2C_MODE, 0x1); + usleep_range(10000, 15000); + + regmap_read(rt5682->regmap, RT5682_DEVICE_ID, &val); + if (val != DEVICE_ID) { + pr_err("Device with ID register %x is not rt5682\n", val); + return -ENODEV; + } + + rt5682_reset(rt5682->regmap); + + rt5682_calibrate(rt5682); + + ret = regmap_register_patch(rt5682->regmap, patch_list, + ARRAY_SIZE(patch_list)); + if (ret != 0) + dev_warn(&i2c->dev, "Failed to apply regmap patch: %d\n", ret); + + regmap_write(rt5682->regmap, RT5682_DEPOP_1, 0x0000); + + /* DMIC pin*/ + if (rt5682->pdata.dmic1_data_pin != RT5682_DMIC1_NULL) { + switch (rt5682->pdata.dmic1_data_pin) { + case RT5682_DMIC1_DATA_GPIO2: /* share with LRCK2 */ + regmap_update_bits(rt5682->regmap, RT5682_DMIC_CTRL_1, + RT5682_DMIC_1_DP_MASK, RT5682_DMIC_1_DP_GPIO2); + regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1, + RT5682_GP2_PIN_MASK, RT5682_GP2_PIN_DMIC_SDA); + break; + + case RT5682_DMIC1_DATA_GPIO5: /* share with DACDAT1 */ + regmap_update_bits(rt5682->regmap, RT5682_DMIC_CTRL_1, + RT5682_DMIC_1_DP_MASK, RT5682_DMIC_1_DP_GPIO5); + regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1, + RT5682_GP5_PIN_MASK, RT5682_GP5_PIN_DMIC_SDA); + break; + + default: + dev_warn(&i2c->dev, "invalid DMIC_DAT pin\n"); + break; + } + + switch (rt5682->pdata.dmic1_clk_pin) { + case RT5682_DMIC1_CLK_GPIO1: /* share with IRQ */ + regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1, + RT5682_GP1_PIN_MASK, RT5682_GP1_PIN_DMIC_CLK); + break; + + case RT5682_DMIC1_CLK_GPIO3: /* share with BCLK2 */ + regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1, + RT5682_GP3_PIN_MASK, RT5682_GP3_PIN_DMIC_CLK); + break; + + default: + dev_warn(&i2c->dev, "invalid DMIC_CLK pin\n"); + break; + } + } + + regmap_update_bits(rt5682->regmap, RT5682_PWR_ANLG_1, + RT5682_LDO1_DVO_MASK | RT5682_HP_DRIVER_MASK, + RT5682_LDO1_DVO_12 | RT5682_HP_DRIVER_5X); + regmap_write(rt5682->regmap, RT5682_MICBIAS_2, 0x0380); + regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1, + RT5682_GP4_PIN_MASK | RT5682_GP5_PIN_MASK, + RT5682_GP4_PIN_ADCDAT1 | RT5682_GP5_PIN_DACDAT1); + regmap_write(rt5682->regmap, RT5682_TEST_MODE_CTRL_1, 0x0000); + + INIT_DELAYED_WORK(&rt5682->jack_detect_work, + rt5682_jack_detect_handler); + INIT_DELAYED_WORK(&rt5682->jd_check_work, + rt5682_jd_check_handler); + + mutex_init(&rt5682->calibrate_mutex); + + if (i2c->irq) { + ret = devm_request_threaded_irq(&i2c->dev, i2c->irq, NULL, + rt5682_irq, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING + | IRQF_ONESHOT, "rt5682", rt5682); + if (ret) + dev_err(&i2c->dev, "Failed to reguest IRQ: %d\n", ret); + + } + + return snd_soc_register_component(&i2c->dev, &soc_component_dev_rt5682, + rt5682_dai, ARRAY_SIZE(rt5682_dai)); +} + +static int rt5682_i2c_remove(struct i2c_client *i2c) +{ + snd_soc_unregister_component(&i2c->dev); + + return 0; +} + +static void rt5682_i2c_shutdown(struct i2c_client *client) +{ + struct rt5682_priv *rt5682 = i2c_get_clientdata(client); + + rt5682_reset(rt5682->regmap); +} + +#ifdef CONFIG_OF +static const struct of_device_id rt5682_of_match[] = { + {.compatible = "realtek,rt5682i"}, + {}, +}; +MODULE_DEVICE_TABLE(of, rt5682_of_match); +#endif + +#ifdef CONFIG_ACPI +static const struct acpi_device_id rt5682_acpi_match[] = { + {"10EC5682", 0,}, + {}, +}; +MODULE_DEVICE_TABLE(acpi, rt5682_acpi_match); +#endif + +static struct i2c_driver rt5682_i2c_driver = { + .driver = { + .name = "rt5682", + .of_match_table = of_match_ptr(rt5682_of_match), + .acpi_match_table = ACPI_PTR(rt5682_acpi_match), + }, + .probe = rt5682_i2c_probe, + .remove = rt5682_i2c_remove, + .shutdown = rt5682_i2c_shutdown, + .id_table = rt5682_i2c_id, +}; +module_i2c_driver(rt5682_i2c_driver); + +MODULE_DESCRIPTION("ASoC RT5682 driver"); +MODULE_AUTHOR("Bard Liao "); +MODULE_LICENSE("GPL v2"); diff --git a/sound/soc/codecs/rt5682.h b/sound/soc/codecs/rt5682.h new file mode 100644 index 000000000000..8068140ebe3f --- /dev/null +++ b/sound/soc/codecs/rt5682.h @@ -0,0 +1,1324 @@ +/* + * rt5682.h -- RT5682/RT5658 ALSA SoC audio driver + * + * Copyright 2018 Realtek Microelectronics + * Author: Bard Liao + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __RT5682_H__ +#define __RT5682_H__ + +#include + +#define DEVICE_ID 0x6530 + +/* Info */ +#define RT5682_RESET 0x0000 +#define RT5682_VERSION_ID 0x00fd +#define RT5682_VENDOR_ID 0x00fe +#define RT5682_DEVICE_ID 0x00ff +/* I/O - Output */ +#define RT5682_HP_CTRL_1 0x0002 +#define RT5682_HP_CTRL_2 0x0003 +#define RT5682_HPL_GAIN 0x0005 +#define RT5682_HPR_GAIN 0x0006 + +#define RT5682_I2C_CTRL 0x0008 + +/* I/O - Input */ +#define RT5682_CBJ_BST_CTRL 0x000b +#define RT5682_CBJ_CTRL_1 0x0010 +#define RT5682_CBJ_CTRL_2 0x0011 +#define RT5682_CBJ_CTRL_3 0x0012 +#define RT5682_CBJ_CTRL_4 0x0013 +#define RT5682_CBJ_CTRL_5 0x0014 +#define RT5682_CBJ_CTRL_6 0x0015 +#define RT5682_CBJ_CTRL_7 0x0016 +/* I/O - ADC/DAC/DMIC */ +#define RT5682_DAC1_DIG_VOL 0x0019 +#define RT5682_STO1_ADC_DIG_VOL 0x001c +#define RT5682_STO1_ADC_BOOST 0x001f +#define RT5682_HP_IMP_GAIN_1 0x0022 +#define RT5682_HP_IMP_GAIN_2 0x0023 +/* Mixer - D-D */ +#define RT5682_SIDETONE_CTRL 0x0024 +#define RT5682_STO1_ADC_MIXER 0x0026 +#define RT5682_AD_DA_MIXER 0x0029 +#define RT5682_STO1_DAC_MIXER 0x002a +#define RT5682_A_DAC1_MUX 0x002b +#define RT5682_DIG_INF2_DATA 0x0030 +/* Mixer - ADC */ +#define RT5682_REC_MIXER 0x003c +#define RT5682_CAL_REC 0x0044 +#define RT5682_ALC_BACK_GAIN 0x0049 +/* Power */ +#define RT5682_PWR_DIG_1 0x0061 +#define RT5682_PWR_DIG_2 0x0062 +#define RT5682_PWR_ANLG_1 0x0063 +#define RT5682_PWR_ANLG_2 0x0064 +#define RT5682_PWR_ANLG_3 0x0065 +#define RT5682_PWR_MIXER 0x0066 +#define RT5682_PWR_VOL 0x0067 +/* Clock Detect */ +#define RT5682_CLK_DET 0x006b +/* Filter Auto Reset */ +#define RT5682_RESET_LPF_CTRL 0x006c +#define RT5682_RESET_HPF_CTRL 0x006d +/* DMIC */ +#define RT5682_DMIC_CTRL_1 0x006e +/* Format - ADC/DAC */ +#define RT5682_I2S1_SDP 0x0070 +#define RT5682_I2S2_SDP 0x0071 +#define RT5682_ADDA_CLK_1 0x0073 +#define RT5682_ADDA_CLK_2 0x0074 +#define RT5682_I2S1_F_DIV_CTRL_1 0x0075 +#define RT5682_I2S1_F_DIV_CTRL_2 0x0076 +/* Format - TDM Control */ +#define RT5682_TDM_CTRL 0x0079 +#define RT5682_TDM_ADDA_CTRL_1 0x007a +#define RT5682_TDM_ADDA_CTRL_2 0x007b +#define RT5682_DATA_SEL_CTRL_1 0x007c +#define RT5682_TDM_TCON_CTRL 0x007e +/* Function - Analog */ +#define RT5682_GLB_CLK 0x0080 +#define RT5682_PLL_CTRL_1 0x0081 +#define RT5682_PLL_CTRL_2 0x0082 +#define RT5682_PLL_TRACK_1 0x0083 +#define RT5682_PLL_TRACK_2 0x0084 +#define RT5682_PLL_TRACK_3 0x0085 +#define RT5682_PLL_TRACK_4 0x0086 +#define RT5682_PLL_TRACK_5 0x0087 +#define RT5682_PLL_TRACK_6 0x0088 +#define RT5682_PLL_TRACK_11 0x008c +#define RT5682_SDW_REF_CLK 0x008d +#define RT5682_DEPOP_1 0x008e +#define RT5682_DEPOP_2 0x008f +#define RT5682_HP_CHARGE_PUMP_1 0x0091 +#define RT5682_HP_CHARGE_PUMP_2 0x0092 +#define RT5682_MICBIAS_1 0x0093 +#define RT5682_MICBIAS_2 0x0094 +#define RT5682_PLL_TRACK_12 0x0098 +#define RT5682_PLL_TRACK_14 0x009a +#define RT5682_PLL2_CTRL_1 0x009b +#define RT5682_PLL2_CTRL_2 0x009c +#define RT5682_PLL2_CTRL_3 0x009d +#define RT5682_PLL2_CTRL_4 0x009e +#define RT5682_RC_CLK_CTRL 0x009f +#define RT5682_I2S_M_CLK_CTRL_1 0x00a0 +#define RT5682_I2S2_F_DIV_CTRL_1 0x00a3 +#define RT5682_I2S2_F_DIV_CTRL_2 0x00a4 +/* Function - Digital */ +#define RT5682_EQ_CTRL_1 0x00ae +#define RT5682_EQ_CTRL_2 0x00af +#define RT5682_IRQ_CTRL_1 0x00b6 +#define RT5682_IRQ_CTRL_2 0x00b7 +#define RT5682_IRQ_CTRL_3 0x00b8 +#define RT5682_IRQ_CTRL_4 0x00b9 +#define RT5682_INT_ST_1 0x00be +#define RT5682_GPIO_CTRL_1 0x00c0 +#define RT5682_GPIO_CTRL_2 0x00c1 +#define RT5682_GPIO_CTRL_3 0x00c2 +#define RT5682_HP_AMP_DET_CTRL_1 0x00d0 +#define RT5682_HP_AMP_DET_CTRL_2 0x00d1 +#define RT5682_MID_HP_AMP_DET 0x00d2 +#define RT5682_LOW_HP_AMP_DET 0x00d3 +#define RT5682_DELAY_BUF_CTRL 0x00d4 +#define RT5682_SV_ZCD_1 0x00d9 +#define RT5682_SV_ZCD_2 0x00da +#define RT5682_IL_CMD_1 0x00db +#define RT5682_IL_CMD_2 0x00dc +#define RT5682_IL_CMD_3 0x00dd +#define RT5682_IL_CMD_4 0x00de +#define RT5682_IL_CMD_5 0x00df +#define RT5682_IL_CMD_6 0x00e0 +#define RT5682_4BTN_IL_CMD_1 0x00e2 +#define RT5682_4BTN_IL_CMD_2 0x00e3 +#define RT5682_4BTN_IL_CMD_3 0x00e4 +#define RT5682_4BTN_IL_CMD_4 0x00e5 +#define RT5682_4BTN_IL_CMD_5 0x00e6 +#define RT5682_4BTN_IL_CMD_6 0x00e7 +#define RT5682_4BTN_IL_CMD_7 0x00e8 + +#define RT5682_ADC_STO1_HP_CTRL_1 0x00ea +#define RT5682_ADC_STO1_HP_CTRL_2 0x00eb +#define RT5682_AJD1_CTRL 0x00f0 +#define RT5682_JD1_THD 0x00f1 +#define RT5682_JD2_THD 0x00f2 +#define RT5682_JD_CTRL_1 0x00f6 +/* General Control */ +#define RT5682_DUMMY_1 0x00fa +#define RT5682_DUMMY_2 0x00fb +#define RT5682_DUMMY_3 0x00fc + +#define RT5682_DAC_ADC_DIG_VOL1 0x0100 +#define RT5682_BIAS_CUR_CTRL_2 0x010b +#define RT5682_BIAS_CUR_CTRL_3 0x010c +#define RT5682_BIAS_CUR_CTRL_4 0x010d +#define RT5682_BIAS_CUR_CTRL_5 0x010e +#define RT5682_BIAS_CUR_CTRL_6 0x010f +#define RT5682_BIAS_CUR_CTRL_7 0x0110 +#define RT5682_BIAS_CUR_CTRL_8 0x0111 +#define RT5682_BIAS_CUR_CTRL_9 0x0112 +#define RT5682_BIAS_CUR_CTRL_10 0x0113 +#define RT5682_VREF_REC_OP_FB_CAP_CTRL 0x0117 +#define RT5682_CHARGE_PUMP_1 0x0125 +#define RT5682_DIG_IN_CTRL_1 0x0132 +#define RT5682_PAD_DRIVING_CTRL 0x0136 +#define RT5682_SOFT_RAMP_DEPOP 0x0138 +#define RT5682_CHOP_DAC 0x013a +#define RT5682_CHOP_ADC 0x013b +#define RT5682_CALIB_ADC_CTRL 0x013c +#define RT5682_VOL_TEST 0x013f +#define RT5682_SPKVDD_DET_STA 0x0142 +#define RT5682_TEST_MODE_CTRL_1 0x0145 +#define RT5682_TEST_MODE_CTRL_2 0x0146 +#define RT5682_TEST_MODE_CTRL_3 0x0147 +#define RT5682_TEST_MODE_CTRL_4 0x0148 +#define RT5682_TEST_MODE_CTRL_5 0x0149 +#define RT5682_PLL1_INTERNAL 0x0150 +#define RT5682_PLL2_INTERNAL 0x0151 +#define RT5682_STO_NG2_CTRL_1 0x0160 +#define RT5682_STO_NG2_CTRL_2 0x0161 +#define RT5682_STO_NG2_CTRL_3 0x0162 +#define RT5682_STO_NG2_CTRL_4 0x0163 +#define RT5682_STO_NG2_CTRL_5 0x0164 +#define RT5682_STO_NG2_CTRL_6 0x0165 +#define RT5682_STO_NG2_CTRL_7 0x0166 +#define RT5682_STO_NG2_CTRL_8 0x0167 +#define RT5682_STO_NG2_CTRL_9 0x0168 +#define RT5682_STO_NG2_CTRL_10 0x0169 +#define RT5682_STO1_DAC_SIL_DET 0x0190 +#define RT5682_SIL_PSV_CTRL1 0x0194 +#define RT5682_SIL_PSV_CTRL2 0x0195 +#define RT5682_SIL_PSV_CTRL3 0x0197 +#define RT5682_SIL_PSV_CTRL4 0x0198 +#define RT5682_SIL_PSV_CTRL5 0x0199 +#define RT5682_HP_IMP_SENS_CTRL_01 0x01af +#define RT5682_HP_IMP_SENS_CTRL_02 0x01b0 +#define RT5682_HP_IMP_SENS_CTRL_03 0x01b1 +#define RT5682_HP_IMP_SENS_CTRL_04 0x01b2 +#define RT5682_HP_IMP_SENS_CTRL_05 0x01b3 +#define RT5682_HP_IMP_SENS_CTRL_06 0x01b4 +#define RT5682_HP_IMP_SENS_CTRL_07 0x01b5 +#define RT5682_HP_IMP_SENS_CTRL_08 0x01b6 +#define RT5682_HP_IMP_SENS_CTRL_09 0x01b7 +#define RT5682_HP_IMP_SENS_CTRL_10 0x01b8 +#define RT5682_HP_IMP_SENS_CTRL_11 0x01b9 +#define RT5682_HP_IMP_SENS_CTRL_12 0x01ba +#define RT5682_HP_IMP_SENS_CTRL_13 0x01bb +#define RT5682_HP_IMP_SENS_CTRL_14 0x01bc +#define RT5682_HP_IMP_SENS_CTRL_15 0x01bd +#define RT5682_HP_IMP_SENS_CTRL_16 0x01be +#define RT5682_HP_IMP_SENS_CTRL_17 0x01bf +#define RT5682_HP_IMP_SENS_CTRL_18 0x01c0 +#define RT5682_HP_IMP_SENS_CTRL_19 0x01c1 +#define RT5682_HP_IMP_SENS_CTRL_20 0x01c2 +#define RT5682_HP_IMP_SENS_CTRL_21 0x01c3 +#define RT5682_HP_IMP_SENS_CTRL_22 0x01c4 +#define RT5682_HP_IMP_SENS_CTRL_23 0x01c5 +#define RT5682_HP_IMP_SENS_CTRL_24 0x01c6 +#define RT5682_HP_IMP_SENS_CTRL_25 0x01c7 +#define RT5682_HP_IMP_SENS_CTRL_26 0x01c8 +#define RT5682_HP_IMP_SENS_CTRL_27 0x01c9 +#define RT5682_HP_IMP_SENS_CTRL_28 0x01ca +#define RT5682_HP_IMP_SENS_CTRL_29 0x01cb +#define RT5682_HP_IMP_SENS_CTRL_30 0x01cc +#define RT5682_HP_IMP_SENS_CTRL_31 0x01cd +#define RT5682_HP_IMP_SENS_CTRL_32 0x01ce +#define RT5682_HP_IMP_SENS_CTRL_33 0x01cf +#define RT5682_HP_IMP_SENS_CTRL_34 0x01d0 +#define RT5682_HP_IMP_SENS_CTRL_35 0x01d1 +#define RT5682_HP_IMP_SENS_CTRL_36 0x01d2 +#define RT5682_HP_IMP_SENS_CTRL_37 0x01d3 +#define RT5682_HP_IMP_SENS_CTRL_38 0x01d4 +#define RT5682_HP_IMP_SENS_CTRL_39 0x01d5 +#define RT5682_HP_IMP_SENS_CTRL_40 0x01d6 +#define RT5682_HP_IMP_SENS_CTRL_41 0x01d7 +#define RT5682_HP_IMP_SENS_CTRL_42 0x01d8 +#define RT5682_HP_IMP_SENS_CTRL_43 0x01d9 +#define RT5682_HP_LOGIC_CTRL_1 0x01da +#define RT5682_HP_LOGIC_CTRL_2 0x01db +#define RT5682_HP_LOGIC_CTRL_3 0x01dc +#define RT5682_HP_CALIB_CTRL_1 0x01de +#define RT5682_HP_CALIB_CTRL_2 0x01df +#define RT5682_HP_CALIB_CTRL_3 0x01e0 +#define RT5682_HP_CALIB_CTRL_4 0x01e1 +#define RT5682_HP_CALIB_CTRL_5 0x01e2 +#define RT5682_HP_CALIB_CTRL_6 0x01e3 +#define RT5682_HP_CALIB_CTRL_7 0x01e4 +#define RT5682_HP_CALIB_CTRL_9 0x01e6 +#define RT5682_HP_CALIB_CTRL_10 0x01e7 +#define RT5682_HP_CALIB_CTRL_11 0x01e8 +#define RT5682_HP_CALIB_STA_1 0x01ea +#define RT5682_HP_CALIB_STA_2 0x01eb +#define RT5682_HP_CALIB_STA_3 0x01ec +#define RT5682_HP_CALIB_STA_4 0x01ed +#define RT5682_HP_CALIB_STA_5 0x01ee +#define RT5682_HP_CALIB_STA_6 0x01ef +#define RT5682_HP_CALIB_STA_7 0x01f0 +#define RT5682_HP_CALIB_STA_8 0x01f1 +#define RT5682_HP_CALIB_STA_9 0x01f2 +#define RT5682_HP_CALIB_STA_10 0x01f3 +#define RT5682_HP_CALIB_STA_11 0x01f4 +#define RT5682_SAR_IL_CMD_1 0x0210 +#define RT5682_SAR_IL_CMD_2 0x0211 +#define RT5682_SAR_IL_CMD_3 0x0212 +#define RT5682_SAR_IL_CMD_4 0x0213 +#define RT5682_SAR_IL_CMD_5 0x0214 +#define RT5682_SAR_IL_CMD_6 0x0215 +#define RT5682_SAR_IL_CMD_7 0x0216 +#define RT5682_SAR_IL_CMD_8 0x0217 +#define RT5682_SAR_IL_CMD_9 0x0218 +#define RT5682_SAR_IL_CMD_10 0x0219 +#define RT5682_SAR_IL_CMD_11 0x021a +#define RT5682_SAR_IL_CMD_12 0x021b +#define RT5682_SAR_IL_CMD_13 0x021c +#define RT5682_EFUSE_CTRL_1 0x0250 +#define RT5682_EFUSE_CTRL_2 0x0251 +#define RT5682_EFUSE_CTRL_3 0x0252 +#define RT5682_EFUSE_CTRL_4 0x0253 +#define RT5682_EFUSE_CTRL_5 0x0254 +#define RT5682_EFUSE_CTRL_6 0x0255 +#define RT5682_EFUSE_CTRL_7 0x0256 +#define RT5682_EFUSE_CTRL_8 0x0257 +#define RT5682_EFUSE_CTRL_9 0x0258 +#define RT5682_EFUSE_CTRL_10 0x0259 +#define RT5682_EFUSE_CTRL_11 0x025a +#define RT5682_JD_TOP_VC_VTRL 0x0270 +#define RT5682_DRC1_CTRL_0 0x02ff +#define RT5682_DRC1_CTRL_1 0x0300 +#define RT5682_DRC1_CTRL_2 0x0301 +#define RT5682_DRC1_CTRL_3 0x0302 +#define RT5682_DRC1_CTRL_4 0x0303 +#define RT5682_DRC1_CTRL_5 0x0304 +#define RT5682_DRC1_CTRL_6 0x0305 +#define RT5682_DRC1_HARD_LMT_CTRL_1 0x0306 +#define RT5682_DRC1_HARD_LMT_CTRL_2 0x0307 +#define RT5682_DRC1_PRIV_1 0x0310 +#define RT5682_DRC1_PRIV_2 0x0311 +#define RT5682_DRC1_PRIV_3 0x0312 +#define RT5682_DRC1_PRIV_4 0x0313 +#define RT5682_DRC1_PRIV_5 0x0314 +#define RT5682_DRC1_PRIV_6 0x0315 +#define RT5682_DRC1_PRIV_7 0x0316 +#define RT5682_DRC1_PRIV_8 0x0317 +#define RT5682_EQ_AUTO_RCV_CTRL1 0x03c0 +#define RT5682_EQ_AUTO_RCV_CTRL2 0x03c1 +#define RT5682_EQ_AUTO_RCV_CTRL3 0x03c2 +#define RT5682_EQ_AUTO_RCV_CTRL4 0x03c3 +#define RT5682_EQ_AUTO_RCV_CTRL5 0x03c4 +#define RT5682_EQ_AUTO_RCV_CTRL6 0x03c5 +#define RT5682_EQ_AUTO_RCV_CTRL7 0x03c6 +#define RT5682_EQ_AUTO_RCV_CTRL8 0x03c7 +#define RT5682_EQ_AUTO_RCV_CTRL9 0x03c8 +#define RT5682_EQ_AUTO_RCV_CTRL10 0x03c9 +#define RT5682_EQ_AUTO_RCV_CTRL11 0x03ca +#define RT5682_EQ_AUTO_RCV_CTRL12 0x03cb +#define RT5682_EQ_AUTO_RCV_CTRL13 0x03cc +#define RT5682_ADC_L_EQ_LPF1_A1 0x03d0 +#define RT5682_R_EQ_LPF1_A1 0x03d1 +#define RT5682_L_EQ_LPF1_H0 0x03d2 +#define RT5682_R_EQ_LPF1_H0 0x03d3 +#define RT5682_L_EQ_BPF1_A1 0x03d4 +#define RT5682_R_EQ_BPF1_A1 0x03d5 +#define RT5682_L_EQ_BPF1_A2 0x03d6 +#define RT5682_R_EQ_BPF1_A2 0x03d7 +#define RT5682_L_EQ_BPF1_H0 0x03d8 +#define RT5682_R_EQ_BPF1_H0 0x03d9 +#define RT5682_L_EQ_BPF2_A1 0x03da +#define RT5682_R_EQ_BPF2_A1 0x03db +#define RT5682_L_EQ_BPF2_A2 0x03dc +#define RT5682_R_EQ_BPF2_A2 0x03dd +#define RT5682_L_EQ_BPF2_H0 0x03de +#define RT5682_R_EQ_BPF2_H0 0x03df +#define RT5682_L_EQ_BPF3_A1 0x03e0 +#define RT5682_R_EQ_BPF3_A1 0x03e1 +#define RT5682_L_EQ_BPF3_A2 0x03e2 +#define RT5682_R_EQ_BPF3_A2 0x03e3 +#define RT5682_L_EQ_BPF3_H0 0x03e4 +#define RT5682_R_EQ_BPF3_H0 0x03e5 +#define RT5682_L_EQ_BPF4_A1 0x03e6 +#define RT5682_R_EQ_BPF4_A1 0x03e7 +#define RT5682_L_EQ_BPF4_A2 0x03e8 +#define RT5682_R_EQ_BPF4_A2 0x03e9 +#define RT5682_L_EQ_BPF4_H0 0x03ea +#define RT5682_R_EQ_BPF4_H0 0x03eb +#define RT5682_L_EQ_HPF1_A1 0x03ec +#define RT5682_R_EQ_HPF1_A1 0x03ed +#define RT5682_L_EQ_HPF1_H0 0x03ee +#define RT5682_R_EQ_HPF1_H0 0x03ef +#define RT5682_L_EQ_PRE_VOL 0x03f0 +#define RT5682_R_EQ_PRE_VOL 0x03f1 +#define RT5682_L_EQ_POST_VOL 0x03f2 +#define RT5682_R_EQ_POST_VOL 0x03f3 +#define RT5682_I2C_MODE 0xffff + + +/* global definition */ +#define RT5682_L_MUTE (0x1 << 15) +#define RT5682_L_MUTE_SFT 15 +#define RT5682_VOL_L_MUTE (0x1 << 14) +#define RT5682_VOL_L_SFT 14 +#define RT5682_R_MUTE (0x1 << 7) +#define RT5682_R_MUTE_SFT 7 +#define RT5682_VOL_R_MUTE (0x1 << 6) +#define RT5682_VOL_R_SFT 6 +#define RT5682_L_VOL_MASK (0x3f << 8) +#define RT5682_L_VOL_SFT 8 +#define RT5682_R_VOL_MASK (0x3f) +#define RT5682_R_VOL_SFT 0 + +/*Headphone Amp L/R Analog Gain and Digital NG2 Gain Control (0x0005 0x0006)*/ +#define RT5682_G_HP (0xf << 8) +#define RT5682_G_HP_SFT 8 +#define RT5682_G_STO_DA_DMIX (0xf) +#define RT5682_G_STO_DA_SFT 0 + +/* CBJ Control (0x000b) */ +#define RT5682_BST_CBJ_MASK (0xf << 8) +#define RT5682_BST_CBJ_SFT 8 + +/* Embeeded Jack and Type Detection Control 1 (0x0010) */ +#define RT5682_EMB_JD_EN (0x1 << 15) +#define RT5682_EMB_JD_EN_SFT 15 +#define RT5682_EMB_JD_RST (0x1 << 14) +#define RT5682_JD_MODE (0x1 << 13) +#define RT5682_JD_MODE_SFT 13 +#define RT5682_DET_TYPE (0x1 << 12) +#define RT5682_DET_TYPE_SFT 12 +#define RT5682_POLA_EXT_JD_MASK (0x1 << 11) +#define RT5682_POLA_EXT_JD_LOW (0x1 << 11) +#define RT5682_POLA_EXT_JD_HIGH (0x0 << 11) +#define RT5682_EXT_JD_DIG (0x1 << 9) +#define RT5682_POL_FAST_OFF_MASK (0x1 << 8) +#define RT5682_POL_FAST_OFF_HIGH (0x1 << 8) +#define RT5682_POL_FAST_OFF_LOW (0x0 << 8) +#define RT5682_FAST_OFF_MASK (0x1 << 7) +#define RT5682_FAST_OFF_EN (0x1 << 7) +#define RT5682_FAST_OFF_DIS (0x0 << 7) +#define RT5682_VREF_POW_MASK (0x1 << 6) +#define RT5682_VREF_POW_FSM (0x0 << 6) +#define RT5682_VREF_POW_REG (0x1 << 6) +#define RT5682_MB1_PATH_MASK (0x1 << 5) +#define RT5682_CTRL_MB1_REG (0x1 << 5) +#define RT5682_CTRL_MB1_FSM (0x0 << 5) +#define RT5682_MB2_PATH_MASK (0x1 << 4) +#define RT5682_CTRL_MB2_REG (0x1 << 4) +#define RT5682_CTRL_MB2_FSM (0x0 << 4) +#define RT5682_TRIG_JD_MASK (0x1 << 3) +#define RT5682_TRIG_JD_HIGH (0x1 << 3) +#define RT5682_TRIG_JD_LOW (0x0 << 3) +#define RT5682_MIC_CAP_MASK (0x1 << 1) +#define RT5682_MIC_CAP_HS (0x1 << 1) +#define RT5682_MIC_CAP_HP (0x0 << 1) +#define RT5682_MIC_CAP_SRC_MASK (0x1) +#define RT5682_MIC_CAP_SRC_REG (0x1) +#define RT5682_MIC_CAP_SRC_ANA (0x0) + +/* Embeeded Jack and Type Detection Control 2 (0x0011) */ +#define RT5682_EXT_JD_SRC (0x7 << 4) +#define RT5682_EXT_JD_SRC_SFT 4 +#define RT5682_EXT_JD_SRC_GPIO_JD1 (0x0 << 4) +#define RT5682_EXT_JD_SRC_GPIO_JD2 (0x1 << 4) +#define RT5682_EXT_JD_SRC_JDH (0x2 << 4) +#define RT5682_EXT_JD_SRC_JDL (0x3 << 4) +#define RT5682_EXT_JD_SRC_MANUAL (0x4 << 4) +#define RT5682_JACK_TYPE_MASK (0x3) + +/* Combo Jack and Type Detection Control 3 (0x0012) */ +#define RT5682_CBJ_IN_BUF_EN (0x1 << 7) + +/* Combo Jack and Type Detection Control 4 (0x0013) */ +#define RT5682_SEL_SHT_MID_TON_MASK (0x3 << 12) +#define RT5682_SEL_SHT_MID_TON_2 (0x0 << 12) +#define RT5682_SEL_SHT_MID_TON_3 (0x1 << 12) +#define RT5682_CBJ_JD_TEST_MASK (0x1 << 6) +#define RT5682_CBJ_JD_TEST_NORM (0x0 << 6) +#define RT5682_CBJ_JD_TEST_MODE (0x1 << 6) + +/* DAC1 Digital Volume (0x0019) */ +#define RT5682_DAC_L1_VOL_MASK (0xff << 8) +#define RT5682_DAC_L1_VOL_SFT 8 +#define RT5682_DAC_R1_VOL_MASK (0xff) +#define RT5682_DAC_R1_VOL_SFT 0 + +/* ADC Digital Volume Control (0x001c) */ +#define RT5682_ADC_L_VOL_MASK (0x7f << 8) +#define RT5682_ADC_L_VOL_SFT 8 +#define RT5682_ADC_R_VOL_MASK (0x7f) +#define RT5682_ADC_R_VOL_SFT 0 + +/* Stereo1 ADC Boost Gain Control (0x001f) */ +#define RT5682_STO1_ADC_L_BST_MASK (0x3 << 14) +#define RT5682_STO1_ADC_L_BST_SFT 14 +#define RT5682_STO1_ADC_R_BST_MASK (0x3 << 12) +#define RT5682_STO1_ADC_R_BST_SFT 12 + +/* Sidetone Control (0x0024) */ +#define RT5682_ST_SRC_SEL (0x1 << 8) +#define RT5682_ST_SRC_SFT 8 +#define RT5682_ST_EN_MASK (0x1 << 6) +#define RT5682_ST_DIS (0x0 << 6) +#define RT5682_ST_EN (0x1 << 6) +#define RT5682_ST_EN_SFT 6 + +/* Stereo1 ADC Mixer Control (0x0026) */ +#define RT5682_M_STO1_ADC_L1 (0x1 << 15) +#define RT5682_M_STO1_ADC_L1_SFT 15 +#define RT5682_M_STO1_ADC_L2 (0x1 << 14) +#define RT5682_M_STO1_ADC_L2_SFT 14 +#define RT5682_STO1_ADC1L_SRC_MASK (0x1 << 13) +#define RT5682_STO1_ADC1L_SRC_SFT 13 +#define RT5682_STO1_ADC1_SRC_ADC (0x1 << 13) +#define RT5682_STO1_ADC1_SRC_DACMIX (0x0 << 13) +#define RT5682_STO1_ADC2L_SRC_MASK (0x1 << 12) +#define RT5682_STO1_ADC2L_SRC_SFT 12 +#define RT5682_STO1_ADCL_SRC_MASK (0x3 << 10) +#define RT5682_STO1_ADCL_SRC_SFT 10 +#define RT5682_STO1_DD_L_SRC_MASK (0x1 << 9) +#define RT5682_STO1_DD_L_SRC_SFT 9 +#define RT5682_STO1_DMIC_SRC_MASK (0x1 << 8) +#define RT5682_STO1_DMIC_SRC_SFT 8 +#define RT5682_STO1_DMIC_SRC_DMIC2 (0x1 << 8) +#define RT5682_STO1_DMIC_SRC_DMIC1 (0x0 << 8) +#define RT5682_M_STO1_ADC_R1 (0x1 << 7) +#define RT5682_M_STO1_ADC_R1_SFT 7 +#define RT5682_M_STO1_ADC_R2 (0x1 << 6) +#define RT5682_M_STO1_ADC_R2_SFT 6 +#define RT5682_STO1_ADC1R_SRC_MASK (0x1 << 5) +#define RT5682_STO1_ADC1R_SRC_SFT 5 +#define RT5682_STO1_ADC2R_SRC_MASK (0x1 << 4) +#define RT5682_STO1_ADC2R_SRC_SFT 4 +#define RT5682_STO1_ADCR_SRC_MASK (0x3 << 2) +#define RT5682_STO1_ADCR_SRC_SFT 2 + +/* ADC Mixer to DAC Mixer Control (0x0029) */ +#define RT5682_M_ADCMIX_L (0x1 << 15) +#define RT5682_M_ADCMIX_L_SFT 15 +#define RT5682_M_DAC1_L (0x1 << 14) +#define RT5682_M_DAC1_L_SFT 14 +#define RT5682_DAC1_R_SEL_MASK (0x1 << 10) +#define RT5682_DAC1_R_SEL_SFT 10 +#define RT5682_DAC1_L_SEL_MASK (0x1 << 8) +#define RT5682_DAC1_L_SEL_SFT 8 +#define RT5682_M_ADCMIX_R (0x1 << 7) +#define RT5682_M_ADCMIX_R_SFT 7 +#define RT5682_M_DAC1_R (0x1 << 6) +#define RT5682_M_DAC1_R_SFT 6 + +/* Stereo1 DAC Mixer Control (0x002a) */ +#define RT5682_M_DAC_L1_STO_L (0x1 << 15) +#define RT5682_M_DAC_L1_STO_L_SFT 15 +#define RT5682_G_DAC_L1_STO_L_MASK (0x1 << 14) +#define RT5682_G_DAC_L1_STO_L_SFT 14 +#define RT5682_M_DAC_R1_STO_L (0x1 << 13) +#define RT5682_M_DAC_R1_STO_L_SFT 13 +#define RT5682_G_DAC_R1_STO_L_MASK (0x1 << 12) +#define RT5682_G_DAC_R1_STO_L_SFT 12 +#define RT5682_M_DAC_L1_STO_R (0x1 << 7) +#define RT5682_M_DAC_L1_STO_R_SFT 7 +#define RT5682_G_DAC_L1_STO_R_MASK (0x1 << 6) +#define RT5682_G_DAC_L1_STO_R_SFT 6 +#define RT5682_M_DAC_R1_STO_R (0x1 << 5) +#define RT5682_M_DAC_R1_STO_R_SFT 5 +#define RT5682_G_DAC_R1_STO_R_MASK (0x1 << 4) +#define RT5682_G_DAC_R1_STO_R_SFT 4 + +/* Analog DAC1 Input Source Control (0x002b) */ +#define RT5682_M_ST_STO_L (0x1 << 9) +#define RT5682_M_ST_STO_L_SFT 9 +#define RT5682_M_ST_STO_R (0x1 << 8) +#define RT5682_M_ST_STO_R_SFT 8 +#define RT5682_DAC_L1_SRC_MASK (0x3 << 4) +#define RT5682_A_DACL1_SFT 4 +#define RT5682_DAC_R1_SRC_MASK (0x3) +#define RT5682_A_DACR1_SFT 0 + +/* Digital Interface Data Control (0x0030) */ +#define RT5682_IF2_ADC_SEL_MASK (0x3 << 0) +#define RT5682_IF2_ADC_SEL_SFT 0 + +/* REC Left Mixer Control 2 (0x003c) */ +#define RT5682_G_CBJ_RM1_L (0x7 << 10) +#define RT5682_G_CBJ_RM1_L_SFT 10 +#define RT5682_M_CBJ_RM1_L (0x1 << 7) +#define RT5682_M_CBJ_RM1_L_SFT 7 + +/* Power Management for Digital 1 (0x0061) */ +#define RT5682_PWR_I2S1 (0x1 << 15) +#define RT5682_PWR_I2S1_BIT 15 +#define RT5682_PWR_I2S2 (0x1 << 14) +#define RT5682_PWR_I2S2_BIT 14 +#define RT5682_PWR_DAC_L1 (0x1 << 11) +#define RT5682_PWR_DAC_L1_BIT 11 +#define RT5682_PWR_DAC_R1 (0x1 << 10) +#define RT5682_PWR_DAC_R1_BIT 10 +#define RT5682_PWR_LDO (0x1 << 8) +#define RT5682_PWR_LDO_BIT 8 +#define RT5682_PWR_ADC_L1 (0x1 << 4) +#define RT5682_PWR_ADC_L1_BIT 4 +#define RT5682_PWR_ADC_R1 (0x1 << 3) +#define RT5682_PWR_ADC_R1_BIT 3 +#define RT5682_DIG_GATE_CTRL (0x1 << 0) +#define RT5682_DIG_GATE_CTRL_SFT 0 + + +/* Power Management for Digital 2 (0x0062) */ +#define RT5682_PWR_ADC_S1F (0x1 << 15) +#define RT5682_PWR_ADC_S1F_BIT 15 +#define RT5682_PWR_DAC_S1F (0x1 << 10) +#define RT5682_PWR_DAC_S1F_BIT 10 + +/* Power Management for Analog 1 (0x0063) */ +#define RT5682_PWR_VREF1 (0x1 << 15) +#define RT5682_PWR_VREF1_BIT 15 +#define RT5682_PWR_FV1 (0x1 << 14) +#define RT5682_PWR_FV1_BIT 14 +#define RT5682_PWR_VREF2 (0x1 << 13) +#define RT5682_PWR_VREF2_BIT 13 +#define RT5682_PWR_FV2 (0x1 << 12) +#define RT5682_PWR_FV2_BIT 12 +#define RT5682_LDO1_DBG_MASK (0x3 << 10) +#define RT5682_PWR_MB (0x1 << 9) +#define RT5682_PWR_MB_BIT 9 +#define RT5682_PWR_BG (0x1 << 7) +#define RT5682_PWR_BG_BIT 7 +#define RT5682_LDO1_BYPASS_MASK (0x1 << 6) +#define RT5682_LDO1_BYPASS (0x1 << 6) +#define RT5682_LDO1_NOT_BYPASS (0x0 << 6) +#define RT5682_PWR_MA_BIT 6 +#define RT5682_LDO1_DVO_MASK (0x3 << 4) +#define RT5682_LDO1_DVO_09 (0x0 << 4) +#define RT5682_LDO1_DVO_10 (0x1 << 4) +#define RT5682_LDO1_DVO_12 (0x2 << 4) +#define RT5682_LDO1_DVO_14 (0x3 << 4) +#define RT5682_HP_DRIVER_MASK (0x3 << 2) +#define RT5682_HP_DRIVER_1X (0x0 << 2) +#define RT5682_HP_DRIVER_3X (0x1 << 2) +#define RT5682_HP_DRIVER_5X (0x3 << 2) +#define RT5682_PWR_HA_L (0x1 << 1) +#define RT5682_PWR_HA_L_BIT 1 +#define RT5682_PWR_HA_R (0x1 << 0) +#define RT5682_PWR_HA_R_BIT 0 + +/* Power Management for Analog 2 (0x0064) */ +#define RT5682_PWR_MB1 (0x1 << 11) +#define RT5682_PWR_MB1_PWR_DOWN (0x0 << 11) +#define RT5682_PWR_MB1_BIT 11 +#define RT5682_PWR_MB2 (0x1 << 10) +#define RT5682_PWR_MB2_PWR_DOWN (0x0 << 10) +#define RT5682_PWR_MB2_BIT 10 +#define RT5682_PWR_JDH (0x1 << 3) +#define RT5682_PWR_JDH_BIT 3 +#define RT5682_PWR_JDL (0x1 << 2) +#define RT5682_PWR_JDL_BIT 2 +#define RT5682_PWR_RM1_L (0x1 << 1) +#define RT5682_PWR_RM1_L_BIT 1 + +/* Power Management for Analog 3 (0x0065) */ +#define RT5682_PWR_CBJ (0x1 << 9) +#define RT5682_PWR_CBJ_BIT 9 +#define RT5682_PWR_PLL (0x1 << 6) +#define RT5682_PWR_PLL_BIT 6 +#define RT5682_PWR_PLL2B (0x1 << 5) +#define RT5682_PWR_PLL2B_BIT 5 +#define RT5682_PWR_PLL2F (0x1 << 4) +#define RT5682_PWR_PLL2F_BIT 4 +#define RT5682_PWR_LDO2 (0x1 << 2) +#define RT5682_PWR_LDO2_BIT 2 +#define RT5682_PWR_DET_SPKVDD (0x1 << 1) +#define RT5682_PWR_DET_SPKVDD_BIT 1 + +/* Power Management for Mixer (0x0066) */ +#define RT5682_PWR_STO1_DAC_L (0x1 << 5) +#define RT5682_PWR_STO1_DAC_L_BIT 5 +#define RT5682_PWR_STO1_DAC_R (0x1 << 4) +#define RT5682_PWR_STO1_DAC_R_BIT 4 + +/* MCLK and System Clock Detection Control (0x006b) */ +#define RT5682_SYS_CLK_DET (0x1 << 15) +#define RT5682_SYS_CLK_DET_SFT 15 +#define RT5682_PLL1_CLK_DET (0x1 << 14) +#define RT5682_PLL1_CLK_DET_SFT 14 +#define RT5682_PLL2_CLK_DET (0x1 << 13) +#define RT5682_PLL2_CLK_DET_SFT 13 +#define RT5682_POW_CLK_DET2_SFT 8 +#define RT5682_POW_CLK_DET_SFT 0 + +/* Digital Microphone Control 1 (0x006e) */ +#define RT5682_DMIC_1_EN_MASK (0x1 << 15) +#define RT5682_DMIC_1_EN_SFT 15 +#define RT5682_DMIC_1_DIS (0x0 << 15) +#define RT5682_DMIC_1_EN (0x1 << 15) +#define RT5682_DMIC_1_DP_MASK (0x3 << 4) +#define RT5682_DMIC_1_DP_SFT 4 +#define RT5682_DMIC_1_DP_GPIO2 (0x0 << 4) +#define RT5682_DMIC_1_DP_GPIO5 (0x1 << 4) +#define RT5682_DMIC_CLK_MASK (0xf << 0) +#define RT5682_DMIC_CLK_SFT 0 + +/* I2S1 Audio Serial Data Port Control (0x0070) */ +#define RT5682_SEL_ADCDAT_MASK (0x1 << 15) +#define RT5682_SEL_ADCDAT_OUT (0x0 << 15) +#define RT5682_SEL_ADCDAT_IN (0x1 << 15) +#define RT5682_SEL_ADCDAT_SFT 15 +#define RT5682_I2S1_TX_CHL_MASK (0x7 << 12) +#define RT5682_I2S1_TX_CHL_SFT 12 +#define RT5682_I2S1_TX_CHL_16 (0x0 << 12) +#define RT5682_I2S1_TX_CHL_20 (0x1 << 12) +#define RT5682_I2S1_TX_CHL_24 (0x2 << 12) +#define RT5682_I2S1_TX_CHL_32 (0x3 << 12) +#define RT5682_I2S1_TX_CHL_8 (0x4 << 12) +#define RT5682_I2S1_RX_CHL_MASK (0x7 << 8) +#define RT5682_I2S1_RX_CHL_SFT 8 +#define RT5682_I2S1_RX_CHL_16 (0x0 << 8) +#define RT5682_I2S1_RX_CHL_20 (0x1 << 8) +#define RT5682_I2S1_RX_CHL_24 (0x2 << 8) +#define RT5682_I2S1_RX_CHL_32 (0x3 << 8) +#define RT5682_I2S1_RX_CHL_8 (0x4 << 8) +#define RT5682_I2S1_MONO_MASK (0x1 << 7) +#define RT5682_I2S1_MONO_EN (0x1 << 7) +#define RT5682_I2S1_MONO_DIS (0x0 << 7) +#define RT5682_I2S2_MONO_MASK (0x1 << 6) +#define RT5682_I2S2_MONO_EN (0x1 << 6) +#define RT5682_I2S2_MONO_DIS (0x0 << 6) +#define RT5682_I2S1_DL_MASK (0x7 << 4) +#define RT5682_I2S1_DL_SFT 4 +#define RT5682_I2S1_DL_16 (0x0 << 4) +#define RT5682_I2S1_DL_20 (0x1 << 4) +#define RT5682_I2S1_DL_24 (0x2 << 4) +#define RT5682_I2S1_DL_32 (0x3 << 4) +#define RT5682_I2S1_DL_8 (0x4 << 4) + +/* I2S1/2 Audio Serial Data Port Control (0x0070)(0x0071) */ +#define RT5682_I2S2_MS_MASK (0x1 << 15) +#define RT5682_I2S2_MS_SFT 15 +#define RT5682_I2S2_MS_M (0x0 << 15) +#define RT5682_I2S2_MS_S (0x1 << 15) +#define RT5682_I2S2_PIN_CFG_MASK (0x1 << 14) +#define RT5682_I2S2_PIN_CFG_SFT 14 +#define RT5682_I2S2_CLK_SEL_MASK (0x1 << 11) +#define RT5682_I2S2_CLK_SEL_SFT 11 +#define RT5682_I2S2_OUT_MASK (0x1 << 9) +#define RT5682_I2S2_OUT_SFT 9 +#define RT5682_I2S2_OUT_UM (0x0 << 9) +#define RT5682_I2S2_OUT_M (0x1 << 9) +#define RT5682_I2S_BP_MASK (0x1 << 8) +#define RT5682_I2S_BP_SFT 8 +#define RT5682_I2S_BP_NOR (0x0 << 8) +#define RT5682_I2S_BP_INV (0x1 << 8) +#define RT5682_I2S2_MONO_EN (0x1 << 6) +#define RT5682_I2S2_MONO_DIS (0x0 << 6) +#define RT5682_I2S2_DL_MASK (0x3 << 4) +#define RT5682_I2S2_DL_SFT 4 +#define RT5682_I2S2_DL_16 (0x0 << 4) +#define RT5682_I2S2_DL_20 (0x1 << 4) +#define RT5682_I2S2_DL_24 (0x2 << 4) +#define RT5682_I2S2_DL_8 (0x3 << 4) +#define RT5682_I2S_DF_MASK (0x7) +#define RT5682_I2S_DF_SFT 0 +#define RT5682_I2S_DF_I2S (0x0) +#define RT5682_I2S_DF_LEFT (0x1) +#define RT5682_I2S_DF_PCM_A (0x2) +#define RT5682_I2S_DF_PCM_B (0x3) +#define RT5682_I2S_DF_PCM_A_N (0x6) +#define RT5682_I2S_DF_PCM_B_N (0x7) + +/* ADC/DAC Clock Control 1 (0x0073) */ +#define RT5682_ADC_OSR_MASK (0xf << 12) +#define RT5682_ADC_OSR_SFT 12 +#define RT5682_ADC_OSR_D_1 (0x0 << 12) +#define RT5682_ADC_OSR_D_2 (0x1 << 12) +#define RT5682_ADC_OSR_D_4 (0x2 << 12) +#define RT5682_ADC_OSR_D_6 (0x3 << 12) +#define RT5682_ADC_OSR_D_8 (0x4 << 12) +#define RT5682_ADC_OSR_D_12 (0x5 << 12) +#define RT5682_ADC_OSR_D_16 (0x6 << 12) +#define RT5682_ADC_OSR_D_24 (0x7 << 12) +#define RT5682_ADC_OSR_D_32 (0x8 << 12) +#define RT5682_ADC_OSR_D_48 (0x9 << 12) +#define RT5682_I2S_M_DIV_MASK (0xf << 12) +#define RT5682_I2S_M_DIV_SFT 8 +#define RT5682_I2S_M_D_1 (0x0 << 8) +#define RT5682_I2S_M_D_2 (0x1 << 8) +#define RT5682_I2S_M_D_3 (0x2 << 8) +#define RT5682_I2S_M_D_4 (0x3 << 8) +#define RT5682_I2S_M_D_6 (0x4 << 8) +#define RT5682_I2S_M_D_8 (0x5 << 8) +#define RT5682_I2S_M_D_12 (0x6 << 8) +#define RT5682_I2S_M_D_16 (0x7 << 8) +#define RT5682_I2S_M_D_24 (0x8 << 8) +#define RT5682_I2S_M_D_32 (0x9 << 8) +#define RT5682_I2S_M_D_48 (0x10 << 8) +#define RT5682_I2S_CLK_SRC_MASK (0x7 << 4) +#define RT5682_I2S_CLK_SRC_SFT 4 +#define RT5682_I2S_CLK_SRC_MCLK (0x0 << 4) +#define RT5682_I2S_CLK_SRC_PLL1 (0x1 << 4) +#define RT5682_I2S_CLK_SRC_PLL2 (0x2 << 4) +#define RT5682_I2S_CLK_SRC_SDW (0x3 << 4) +#define RT5682_I2S_CLK_SRC_RCCLK (0x4 << 4) /* 25M */ +#define RT5682_DAC_OSR_MASK (0xf << 0) +#define RT5682_DAC_OSR_SFT 0 +#define RT5682_DAC_OSR_D_1 (0x0 << 0) +#define RT5682_DAC_OSR_D_2 (0x1 << 0) +#define RT5682_DAC_OSR_D_4 (0x2 << 0) +#define RT5682_DAC_OSR_D_6 (0x3 << 0) +#define RT5682_DAC_OSR_D_8 (0x4 << 0) +#define RT5682_DAC_OSR_D_12 (0x5 << 0) +#define RT5682_DAC_OSR_D_16 (0x6 << 0) +#define RT5682_DAC_OSR_D_24 (0x7 << 0) +#define RT5682_DAC_OSR_D_32 (0x8 << 0) +#define RT5682_DAC_OSR_D_48 (0x9 << 0) + +/* ADC/DAC Clock Control 2 (0x0074) */ +#define RT5682_I2S2_BCLK_MS2_MASK (0x1 << 11) +#define RT5682_I2S2_BCLK_MS2_SFT 11 +#define RT5682_I2S2_BCLK_MS2_32 (0x0 << 11) +#define RT5682_I2S2_BCLK_MS2_64 (0x1 << 11) + + +/* TDM control 1 (0x0079) */ +#define RT5682_TDM_TX_CH_MASK (0x3 << 12) +#define RT5682_TDM_TX_CH_2 (0x0 << 12) +#define RT5682_TDM_TX_CH_4 (0x1 << 12) +#define RT5682_TDM_TX_CH_6 (0x2 << 12) +#define RT5682_TDM_TX_CH_8 (0x3 << 12) +#define RT5682_TDM_RX_CH_MASK (0x3 << 8) +#define RT5682_TDM_RX_CH_2 (0x0 << 8) +#define RT5682_TDM_RX_CH_4 (0x1 << 8) +#define RT5682_TDM_RX_CH_6 (0x2 << 8) +#define RT5682_TDM_RX_CH_8 (0x3 << 8) +#define RT5682_TDM_ADC_LCA_MASK (0xf << 4) +#define RT5682_TDM_ADC_LCA_SFT 4 +#define RT5682_TDM_ADC_DL_SFT 0 + +/* TDM control 2 (0x007a) */ +#define RT5682_IF1_ADC1_SEL_SFT 14 +#define RT5682_IF1_ADC2_SEL_SFT 12 +#define RT5682_IF1_ADC3_SEL_SFT 10 +#define RT5682_IF1_ADC4_SEL_SFT 8 +#define RT5682_TDM_ADC_SEL_SFT 4 + +/* TDM control 3 (0x007b) */ +#define RT5682_TDM_EN (0x1 << 7) + +/* TDM/I2S control (0x007e) */ +#define RT5682_TDM_S_BP_MASK (0x1 << 15) +#define RT5682_TDM_S_BP_SFT 15 +#define RT5682_TDM_S_BP_NOR (0x0 << 15) +#define RT5682_TDM_S_BP_INV (0x1 << 15) +#define RT5682_TDM_S_LP_MASK (0x1 << 14) +#define RT5682_TDM_S_LP_SFT 14 +#define RT5682_TDM_S_LP_NOR (0x0 << 14) +#define RT5682_TDM_S_LP_INV (0x1 << 14) +#define RT5682_TDM_DF_MASK (0x7 << 11) +#define RT5682_TDM_DF_SFT 11 +#define RT5682_TDM_DF_I2S (0x0 << 11) +#define RT5682_TDM_DF_LEFT (0x1 << 11) +#define RT5682_TDM_DF_PCM_A (0x2 << 11) +#define RT5682_TDM_DF_PCM_B (0x3 << 11) +#define RT5682_TDM_DF_PCM_A_N (0x6 << 11) +#define RT5682_TDM_DF_PCM_B_N (0x7 << 11) +#define RT5682_TDM_CL_MASK (0x3 << 4) +#define RT5682_TDM_CL_16 (0x0 << 4) +#define RT5682_TDM_CL_20 (0x1 << 4) +#define RT5682_TDM_CL_24 (0x2 << 4) +#define RT5682_TDM_CL_32 (0x3 << 4) +#define RT5682_TDM_M_BP_MASK (0x1 << 2) +#define RT5682_TDM_M_BP_SFT 2 +#define RT5682_TDM_M_BP_NOR (0x0 << 2) +#define RT5682_TDM_M_BP_INV (0x1 << 2) +#define RT5682_TDM_M_LP_MASK (0x1 << 1) +#define RT5682_TDM_M_LP_SFT 1 +#define RT5682_TDM_M_LP_NOR (0x0 << 1) +#define RT5682_TDM_M_LP_INV (0x1 << 1) +#define RT5682_TDM_MS_MASK (0x1 << 0) +#define RT5682_TDM_MS_SFT 0 +#define RT5682_TDM_MS_M (0x0 << 0) +#define RT5682_TDM_MS_S (0x1 << 0) + +/* Global Clock Control (0x0080) */ +#define RT5682_SCLK_SRC_MASK (0x7 << 13) +#define RT5682_SCLK_SRC_SFT 13 +#define RT5682_SCLK_SRC_MCLK (0x0 << 13) +#define RT5682_SCLK_SRC_PLL1 (0x1 << 13) +#define RT5682_SCLK_SRC_PLL2 (0x2 << 13) +#define RT5682_SCLK_SRC_SDW (0x3 << 13) +#define RT5682_SCLK_SRC_RCCLK (0x4 << 13) +#define RT5682_PLL1_SRC_MASK (0x3 << 10) +#define RT5682_PLL1_SRC_SFT 10 +#define RT5682_PLL1_SRC_MCLK (0x0 << 10) +#define RT5682_PLL1_SRC_BCLK1 (0x1 << 10) +#define RT5682_PLL1_SRC_SDW (0x2 << 10) +#define RT5682_PLL1_SRC_RC (0x3 << 10) +#define RT5682_PLL2_SRC_MASK (0x3 << 8) +#define RT5682_PLL2_SRC_SFT 8 +#define RT5682_PLL2_SRC_MCLK (0x0 << 8) +#define RT5682_PLL2_SRC_BCLK1 (0x1 << 8) +#define RT5682_PLL2_SRC_SDW (0x2 << 8) +#define RT5682_PLL2_SRC_RC (0x3 << 8) + + + +#define RT5682_PLL_INP_MAX 40000000 +#define RT5682_PLL_INP_MIN 256000 +/* PLL M/N/K Code Control 1 (0x0081) */ +#define RT5682_PLL_N_MAX 0x001ff +#define RT5682_PLL_N_MASK (RT5682_PLL_N_MAX << 7) +#define RT5682_PLL_N_SFT 7 +#define RT5682_PLL_K_MAX 0x001f +#define RT5682_PLL_K_MASK (RT5682_PLL_K_MAX) +#define RT5682_PLL_K_SFT 0 + +/* PLL M/N/K Code Control 2 (0x0082) */ +#define RT5682_PLL_M_MAX 0x00f +#define RT5682_PLL_M_MASK (RT5682_PLL_M_MAX << 12) +#define RT5682_PLL_M_SFT 12 +#define RT5682_PLL_M_BP (0x1 << 11) +#define RT5682_PLL_M_BP_SFT 11 +#define RT5682_PLL_K_BP (0x1 << 10) +#define RT5682_PLL_K_BP_SFT 10 +#define RT5682_PLL_RST (0x1 << 1) + +/* PLL tracking mode 1 (0x0083) */ +#define RT5682_DA_ASRC_MASK (0x1 << 13) +#define RT5682_DA_ASRC_SFT 13 +#define RT5682_DAC_STO1_ASRC_MASK (0x1 << 12) +#define RT5682_DAC_STO1_ASRC_SFT 12 +#define RT5682_AD_ASRC_MASK (0x1 << 8) +#define RT5682_AD_ASRC_SFT 8 +#define RT5682_AD_ASRC_SEL_MASK (0x1 << 4) +#define RT5682_AD_ASRC_SEL_SFT 4 +#define RT5682_DMIC_ASRC_MASK (0x1 << 3) +#define RT5682_DMIC_ASRC_SFT 3 +#define RT5682_ADC_STO1_ASRC_MASK (0x1 << 2) +#define RT5682_ADC_STO1_ASRC_SFT 2 +#define RT5682_DA_ASRC_SEL_MASK (0x1 << 0) +#define RT5682_DA_ASRC_SEL_SFT 0 + +/* PLL tracking mode 2 3 (0x0084)(0x0085)*/ +#define RT5682_FILTER_CLK_SEL_MASK (0x7 << 12) +#define RT5682_FILTER_CLK_SEL_SFT 12 +#define RT5682_FILTER_CLK_DIV_MASK (0xf << 8) +#define RT5682_FILTER_CLK_DIV_SFT 8 + +/* ASRC Control 4 (0x0086) */ +#define RT5682_ASRCIN_FTK_N1_MASK (0x3 << 14) +#define RT5682_ASRCIN_FTK_N1_SFT 14 +#define RT5682_ASRCIN_FTK_N2_MASK (0x3 << 12) +#define RT5682_ASRCIN_FTK_N2_SFT 12 +#define RT5682_ASRCIN_FTK_M1_MASK (0x7 << 8) +#define RT5682_ASRCIN_FTK_M1_SFT 8 +#define RT5682_ASRCIN_FTK_M2_MASK (0x7 << 4) +#define RT5682_ASRCIN_FTK_M2_SFT 4 + +/* SoundWire reference clk (0x008d) */ +#define RT5682_PLL2_OUT_MASK (0x1 << 8) +#define RT5682_PLL2_OUT_98M (0x0 << 8) +#define RT5682_PLL2_OUT_49M (0x1 << 8) +#define RT5682_SDW_REF_2_MASK (0xf << 4) +#define RT5682_SDW_REF_2_SFT 4 +#define RT5682_SDW_REF_2_48K (0x0 << 4) +#define RT5682_SDW_REF_2_96K (0x1 << 4) +#define RT5682_SDW_REF_2_192K (0x2 << 4) +#define RT5682_SDW_REF_2_32K (0x3 << 4) +#define RT5682_SDW_REF_2_24K (0x4 << 4) +#define RT5682_SDW_REF_2_16K (0x5 << 4) +#define RT5682_SDW_REF_2_12K (0x6 << 4) +#define RT5682_SDW_REF_2_8K (0x7 << 4) +#define RT5682_SDW_REF_2_44K (0x8 << 4) +#define RT5682_SDW_REF_2_88K (0x9 << 4) +#define RT5682_SDW_REF_2_176K (0xa << 4) +#define RT5682_SDW_REF_2_353K (0xb << 4) +#define RT5682_SDW_REF_2_22K (0xc << 4) +#define RT5682_SDW_REF_2_384K (0xd << 4) +#define RT5682_SDW_REF_2_11K (0xe << 4) +#define RT5682_SDW_REF_1_MASK (0xf << 0) +#define RT5682_SDW_REF_1_SFT 0 +#define RT5682_SDW_REF_1_48K (0x0 << 0) +#define RT5682_SDW_REF_1_96K (0x1 << 0) +#define RT5682_SDW_REF_1_192K (0x2 << 0) +#define RT5682_SDW_REF_1_32K (0x3 << 0) +#define RT5682_SDW_REF_1_24K (0x4 << 0) +#define RT5682_SDW_REF_1_16K (0x5 << 0) +#define RT5682_SDW_REF_1_12K (0x6 << 0) +#define RT5682_SDW_REF_1_8K (0x7 << 0) +#define RT5682_SDW_REF_1_44K (0x8 << 0) +#define RT5682_SDW_REF_1_88K (0x9 << 0) +#define RT5682_SDW_REF_1_176K (0xa << 0) +#define RT5682_SDW_REF_1_353K (0xb << 0) +#define RT5682_SDW_REF_1_22K (0xc << 0) +#define RT5682_SDW_REF_1_384K (0xd << 0) +#define RT5682_SDW_REF_1_11K (0xe << 0) + +/* Depop Mode Control 1 (0x008e) */ +#define RT5682_PUMP_EN (0x1 << 3) +#define RT5682_PUMP_EN_SFT 3 +#define RT5682_CAPLESS_EN (0x1 << 0) +#define RT5682_CAPLESS_EN_SFT 0 + +/* Depop Mode Control 2 (0x8f) */ +#define RT5682_RAMP_MASK (0x1 << 12) +#define RT5682_RAMP_SFT 12 +#define RT5682_RAMP_DIS (0x0 << 12) +#define RT5682_RAMP_EN (0x1 << 12) +#define RT5682_BPS_MASK (0x1 << 11) +#define RT5682_BPS_SFT 11 +#define RT5682_BPS_DIS (0x0 << 11) +#define RT5682_BPS_EN (0x1 << 11) +#define RT5682_FAST_UPDN_MASK (0x1 << 10) +#define RT5682_FAST_UPDN_SFT 10 +#define RT5682_FAST_UPDN_DIS (0x0 << 10) +#define RT5682_FAST_UPDN_EN (0x1 << 10) +#define RT5682_VLO_MASK (0x1 << 7) +#define RT5682_VLO_SFT 7 +#define RT5682_VLO_3V (0x0 << 7) +#define RT5682_VLO_33V (0x1 << 7) + +/* HPOUT charge pump 1 (0x0091) */ +#define RT5682_OSW_L_MASK (0x1 << 11) +#define RT5682_OSW_L_SFT 11 +#define RT5682_OSW_L_DIS (0x0 << 11) +#define RT5682_OSW_L_EN (0x1 << 11) +#define RT5682_OSW_R_MASK (0x1 << 10) +#define RT5682_OSW_R_SFT 10 +#define RT5682_OSW_R_DIS (0x0 << 10) +#define RT5682_OSW_R_EN (0x1 << 10) +#define RT5682_PM_HP_MASK (0x3 << 8) +#define RT5682_PM_HP_SFT 8 +#define RT5682_PM_HP_LV (0x0 << 8) +#define RT5682_PM_HP_MV (0x1 << 8) +#define RT5682_PM_HP_HV (0x2 << 8) +#define RT5682_IB_HP_MASK (0x3 << 6) +#define RT5682_IB_HP_SFT 6 +#define RT5682_IB_HP_125IL (0x0 << 6) +#define RT5682_IB_HP_25IL (0x1 << 6) +#define RT5682_IB_HP_5IL (0x2 << 6) +#define RT5682_IB_HP_1IL (0x3 << 6) + +/* Micbias Control1 (0x93) */ +#define RT5682_MIC1_OV_MASK (0x3 << 14) +#define RT5682_MIC1_OV_SFT 14 +#define RT5682_MIC1_OV_2V7 (0x0 << 14) +#define RT5682_MIC1_OV_2V4 (0x1 << 14) +#define RT5682_MIC1_OV_2V25 (0x3 << 14) +#define RT5682_MIC1_OV_1V8 (0x4 << 14) +#define RT5682_MIC1_CLK_MASK (0x1 << 13) +#define RT5682_MIC1_CLK_SFT 13 +#define RT5682_MIC1_CLK_DIS (0x0 << 13) +#define RT5682_MIC1_CLK_EN (0x1 << 13) +#define RT5682_MIC1_OVCD_MASK (0x1 << 12) +#define RT5682_MIC1_OVCD_SFT 12 +#define RT5682_MIC1_OVCD_DIS (0x0 << 12) +#define RT5682_MIC1_OVCD_EN (0x1 << 12) +#define RT5682_MIC1_OVTH_MASK (0x3 << 10) +#define RT5682_MIC1_OVTH_SFT 10 +#define RT5682_MIC1_OVTH_768UA (0x0 << 10) +#define RT5682_MIC1_OVTH_960UA (0x1 << 10) +#define RT5682_MIC1_OVTH_1152UA (0x2 << 10) +#define RT5682_MIC1_OVTH_1960UA (0x3 << 10) +#define RT5682_MIC2_OV_MASK (0x3 << 8) +#define RT5682_MIC2_OV_SFT 8 +#define RT5682_MIC2_OV_2V7 (0x0 << 8) +#define RT5682_MIC2_OV_2V4 (0x1 << 8) +#define RT5682_MIC2_OV_2V25 (0x3 << 8) +#define RT5682_MIC2_OV_1V8 (0x4 << 8) +#define RT5682_MIC2_CLK_MASK (0x1 << 7) +#define RT5682_MIC2_CLK_SFT 7 +#define RT5682_MIC2_CLK_DIS (0x0 << 7) +#define RT5682_MIC2_CLK_EN (0x1 << 7) +#define RT5682_MIC2_OVTH_MASK (0x3 << 4) +#define RT5682_MIC2_OVTH_SFT 4 +#define RT5682_MIC2_OVTH_768UA (0x0 << 4) +#define RT5682_MIC2_OVTH_960UA (0x1 << 4) +#define RT5682_MIC2_OVTH_1152UA (0x2 << 4) +#define RT5682_MIC2_OVTH_1960UA (0x3 << 4) +#define RT5682_PWR_MB_MASK (0x1 << 3) +#define RT5682_PWR_MB_SFT 3 +#define RT5682_PWR_MB_PD (0x0 << 3) +#define RT5682_PWR_MB_PU (0x1 << 3) + +/* Micbias Control2 (0x0094) */ +#define RT5682_PWR_CLK25M_MASK (0x1 << 9) +#define RT5682_PWR_CLK25M_SFT 9 +#define RT5682_PWR_CLK25M_PD (0x0 << 9) +#define RT5682_PWR_CLK25M_PU (0x1 << 9) +#define RT5682_PWR_CLK1M_MASK (0x1 << 8) +#define RT5682_PWR_CLK1M_SFT 8 +#define RT5682_PWR_CLK1M_PD (0x0 << 8) +#define RT5682_PWR_CLK1M_PU (0x1 << 8) + +/* RC Clock Control (0x009f) */ +#define RT5682_POW_IRQ (0x1 << 15) +#define RT5682_POW_JDH (0x1 << 14) +#define RT5682_POW_JDL (0x1 << 13) +#define RT5682_POW_ANA (0x1 << 12) + +/* I2S Master Mode Clock Control 1 (0x00a0) */ +#define RT5682_CLK_SRC_MCLK (0x0) +#define RT5682_CLK_SRC_PLL1 (0x1) +#define RT5682_CLK_SRC_PLL2 (0x2) +#define RT5682_CLK_SRC_SDW (0x3) +#define RT5682_CLK_SRC_RCCLK (0x4) +#define RT5682_I2S_PD_1 (0x0) +#define RT5682_I2S_PD_2 (0x1) +#define RT5682_I2S_PD_3 (0x2) +#define RT5682_I2S_PD_4 (0x3) +#define RT5682_I2S_PD_6 (0x4) +#define RT5682_I2S_PD_8 (0x5) +#define RT5682_I2S_PD_12 (0x6) +#define RT5682_I2S_PD_16 (0x7) +#define RT5682_I2S_PD_24 (0x8) +#define RT5682_I2S_PD_32 (0x9) +#define RT5682_I2S_PD_48 (0xa) +#define RT5682_I2S2_SRC_MASK (0x3 << 4) +#define RT5682_I2S2_SRC_SFT 4 +#define RT5682_I2S2_M_PD_MASK (0xf << 0) +#define RT5682_I2S2_M_PD_SFT 0 + +/* IRQ Control 1 (0x00b6) */ +#define RT5682_JD1_PULSE_EN_MASK (0x1 << 10) +#define RT5682_JD1_PULSE_EN_SFT 10 +#define RT5682_JD1_PULSE_DIS (0x0 << 10) +#define RT5682_JD1_PULSE_EN (0x1 << 10) + +/* IRQ Control 2 (0x00b7) */ +#define RT5682_JD1_EN_MASK (0x1 << 15) +#define RT5682_JD1_EN_SFT 15 +#define RT5682_JD1_DIS (0x0 << 15) +#define RT5682_JD1_EN (0x1 << 15) +#define RT5682_JD1_POL_MASK (0x1 << 13) +#define RT5682_JD1_POL_NOR (0x0 << 13) +#define RT5682_JD1_POL_INV (0x1 << 13) + +/* IRQ Control 3 (0x00b8) */ +#define RT5682_IL_IRQ_MASK (0x1 << 7) +#define RT5682_IL_IRQ_DIS (0x0 << 7) +#define RT5682_IL_IRQ_EN (0x1 << 7) + +/* GPIO Control 1 (0x00c0) */ +#define RT5682_GP1_PIN_MASK (0x3 << 14) +#define RT5682_GP1_PIN_SFT 14 +#define RT5682_GP1_PIN_GPIO1 (0x0 << 14) +#define RT5682_GP1_PIN_IRQ (0x1 << 14) +#define RT5682_GP1_PIN_DMIC_CLK (0x2 << 14) +#define RT5682_GP2_PIN_MASK (0x3 << 12) +#define RT5682_GP2_PIN_SFT 12 +#define RT5682_GP2_PIN_GPIO2 (0x0 << 12) +#define RT5682_GP2_PIN_LRCK2 (0x1 << 12) +#define RT5682_GP2_PIN_DMIC_SDA (0x2 << 12) +#define RT5682_GP3_PIN_MASK (0x3 << 10) +#define RT5682_GP3_PIN_SFT 10 +#define RT5682_GP3_PIN_GPIO3 (0x0 << 10) +#define RT5682_GP3_PIN_BCLK2 (0x1 << 10) +#define RT5682_GP3_PIN_DMIC_CLK (0x2 << 10) +#define RT5682_GP4_PIN_MASK (0x3 << 8) +#define RT5682_GP4_PIN_SFT 8 +#define RT5682_GP4_PIN_GPIO4 (0x0 << 8) +#define RT5682_GP4_PIN_ADCDAT1 (0x1 << 8) +#define RT5682_GP4_PIN_DMIC_CLK (0x2 << 8) +#define RT5682_GP4_PIN_ADCDAT2 (0x3 << 8) +#define RT5682_GP5_PIN_MASK (0x3 << 6) +#define RT5682_GP5_PIN_SFT 6 +#define RT5682_GP5_PIN_GPIO5 (0x0 << 6) +#define RT5682_GP5_PIN_DACDAT1 (0x1 << 6) +#define RT5682_GP5_PIN_DMIC_SDA (0x2 << 6) +#define RT5682_GP6_PIN_MASK (0x1 << 5) +#define RT5682_GP6_PIN_SFT 5 +#define RT5682_GP6_PIN_GPIO6 (0x0 << 5) +#define RT5682_GP6_PIN_LRCK1 (0x1 << 5) + +/* GPIO Control 2 (0x00c1)*/ +#define RT5682_GP1_PF_MASK (0x1 << 15) +#define RT5682_GP1_PF_IN (0x0 << 15) +#define RT5682_GP1_PF_OUT (0x1 << 15) +#define RT5682_GP1_OUT_MASK (0x1 << 14) +#define RT5682_GP1_OUT_L (0x0 << 14) +#define RT5682_GP1_OUT_H (0x1 << 14) +#define RT5682_GP2_PF_MASK (0x1 << 13) +#define RT5682_GP2_PF_IN (0x0 << 13) +#define RT5682_GP2_PF_OUT (0x1 << 13) +#define RT5682_GP2_OUT_MASK (0x1 << 12) +#define RT5682_GP2_OUT_L (0x0 << 12) +#define RT5682_GP2_OUT_H (0x1 << 12) +#define RT5682_GP3_PF_MASK (0x1 << 11) +#define RT5682_GP3_PF_IN (0x0 << 11) +#define RT5682_GP3_PF_OUT (0x1 << 11) +#define RT5682_GP3_OUT_MASK (0x1 << 10) +#define RT5682_GP3_OUT_L (0x0 << 10) +#define RT5682_GP3_OUT_H (0x1 << 10) +#define RT5682_GP4_PF_MASK (0x1 << 9) +#define RT5682_GP4_PF_IN (0x0 << 9) +#define RT5682_GP4_PF_OUT (0x1 << 9) +#define RT5682_GP4_OUT_MASK (0x1 << 8) +#define RT5682_GP4_OUT_L (0x0 << 8) +#define RT5682_GP4_OUT_H (0x1 << 8) +#define RT5682_GP5_PF_MASK (0x1 << 7) +#define RT5682_GP5_PF_IN (0x0 << 7) +#define RT5682_GP5_PF_OUT (0x1 << 7) +#define RT5682_GP5_OUT_MASK (0x1 << 6) +#define RT5682_GP5_OUT_L (0x0 << 6) +#define RT5682_GP5_OUT_H (0x1 << 6) +#define RT5682_GP6_PF_MASK (0x1 << 5) +#define RT5682_GP6_PF_IN (0x0 << 5) +#define RT5682_GP6_PF_OUT (0x1 << 5) +#define RT5682_GP6_OUT_MASK (0x1 << 4) +#define RT5682_GP6_OUT_L (0x0 << 4) +#define RT5682_GP6_OUT_H (0x1 << 4) + + +/* GPIO Status (0x00c2) */ +#define RT5682_GP6_STA (0x1 << 6) +#define RT5682_GP5_STA (0x1 << 5) +#define RT5682_GP4_STA (0x1 << 4) +#define RT5682_GP3_STA (0x1 << 3) +#define RT5682_GP2_STA (0x1 << 2) +#define RT5682_GP1_STA (0x1 << 1) + +/* Soft volume and zero cross control 1 (0x00d9) */ +#define RT5682_SV_MASK (0x1 << 15) +#define RT5682_SV_SFT 15 +#define RT5682_SV_DIS (0x0 << 15) +#define RT5682_SV_EN (0x1 << 15) +#define RT5682_ZCD_MASK (0x1 << 10) +#define RT5682_ZCD_SFT 10 +#define RT5682_ZCD_PD (0x0 << 10) +#define RT5682_ZCD_PU (0x1 << 10) +#define RT5682_SV_DLY_MASK (0xf) +#define RT5682_SV_DLY_SFT 0 + +/* Soft volume and zero cross control 2 (0x00da) */ +#define RT5682_ZCD_BST1_CBJ_MASK (0x1 << 7) +#define RT5682_ZCD_BST1_CBJ_SFT 7 +#define RT5682_ZCD_BST1_CBJ_DIS (0x0 << 7) +#define RT5682_ZCD_BST1_CBJ_EN (0x1 << 7) +#define RT5682_ZCD_RECMIX_MASK (0x1) +#define RT5682_ZCD_RECMIX_SFT 0 +#define RT5682_ZCD_RECMIX_DIS (0x0) +#define RT5682_ZCD_RECMIX_EN (0x1) + +/* 4 Button Inline Command Control 2 (0x00e3) */ +#define RT5682_4BTN_IL_MASK (0x1 << 15) +#define RT5682_4BTN_IL_EN (0x1 << 15) +#define RT5682_4BTN_IL_DIS (0x0 << 15) +#define RT5682_4BTN_IL_RST_MASK (0x1 << 14) +#define RT5682_4BTN_IL_NOR (0x1 << 14) +#define RT5682_4BTN_IL_RST (0x0 << 14) + +/* Analog JD Control (0x00f0) */ +#define RT5682_JDH_RS_MASK (0x1 << 4) +#define RT5682_JDH_NO_PLUG (0x1 << 4) +#define RT5682_JDH_PLUG (0x0 << 4) + +/* Chopper and Clock control for DAC (0x013a)*/ +#define RT5682_CKXEN_DAC1_MASK (0x1 << 13) +#define RT5682_CKXEN_DAC1_SFT 13 +#define RT5682_CKGEN_DAC1_MASK (0x1 << 12) +#define RT5682_CKGEN_DAC1_SFT 12 + +/* Chopper and Clock control for ADC (0x013b)*/ +#define RT5682_CKXEN_ADC1_MASK (0x1 << 13) +#define RT5682_CKXEN_ADC1_SFT 13 +#define RT5682_CKGEN_ADC1_MASK (0x1 << 12) +#define RT5682_CKGEN_ADC1_SFT 12 + +/* Volume test (0x013f)*/ +#define RT5682_SEL_CLK_VOL_MASK (0x1 << 15) +#define RT5682_SEL_CLK_VOL_EN (0x1 << 15) +#define RT5682_SEL_CLK_VOL_DIS (0x0 << 15) + +/* Test Mode Control 1 (0x0145) */ +#define RT5682_AD2DA_LB_MASK (0x1 << 10) +#define RT5682_AD2DA_LB_SFT 10 + +/* Stereo Noise Gate Control 1 (0x0160) */ +#define RT5682_NG2_EN_MASK (0x1 << 15) +#define RT5682_NG2_EN (0x1 << 15) +#define RT5682_NG2_DIS (0x0 << 15) + +/* Stereo1 DAC Silence Detection Control (0x0190) */ +#define RT5682_DEB_STO_DAC_MASK (0x7 << 4) +#define RT5682_DEB_80_MS (0x0 << 4) + +/* SAR ADC Inline Command Control 1 (0x0210) */ +#define RT5682_SAR_BUTT_DET_MASK (0x1 << 15) +#define RT5682_SAR_BUTT_DET_EN (0x1 << 15) +#define RT5682_SAR_BUTT_DET_DIS (0x0 << 15) +#define RT5682_SAR_BUTDET_MODE_MASK (0x1 << 14) +#define RT5682_SAR_BUTDET_POW_SAV (0x1 << 14) +#define RT5682_SAR_BUTDET_POW_NORM (0x0 << 14) +#define RT5682_SAR_BUTDET_RST_MASK (0x1 << 13) +#define RT5682_SAR_BUTDET_RST_NORMAL (0x1 << 13) +#define RT5682_SAR_BUTDET_RST (0x0 << 13) +#define RT5682_SAR_POW_MASK (0x1 << 12) +#define RT5682_SAR_POW_EN (0x1 << 12) +#define RT5682_SAR_POW_DIS (0x0 << 12) +#define RT5682_SAR_RST_MASK (0x1 << 11) +#define RT5682_SAR_RST_NORMAL (0x1 << 11) +#define RT5682_SAR_RST (0x0 << 11) +#define RT5682_SAR_BYPASS_MASK (0x1 << 10) +#define RT5682_SAR_BYPASS_EN (0x1 << 10) +#define RT5682_SAR_BYPASS_DIS (0x0 << 10) +#define RT5682_SAR_SEL_MB1_MASK (0x1 << 9) +#define RT5682_SAR_SEL_MB1_SEL (0x1 << 9) +#define RT5682_SAR_SEL_MB1_NOSEL (0x0 << 9) +#define RT5682_SAR_SEL_MB2_MASK (0x1 << 8) +#define RT5682_SAR_SEL_MB2_SEL (0x1 << 8) +#define RT5682_SAR_SEL_MB2_NOSEL (0x0 << 8) +#define RT5682_SAR_SEL_MODE_MASK (0x1 << 7) +#define RT5682_SAR_SEL_MODE_CMP (0x1 << 7) +#define RT5682_SAR_SEL_MODE_ADC (0x0 << 7) +#define RT5682_SAR_SEL_MB1_MB2_MASK (0x1 << 5) +#define RT5682_SAR_SEL_MB1_MB2_AUTO (0x1 << 5) +#define RT5682_SAR_SEL_MB1_MB2_MANU (0x0 << 5) +#define RT5682_SAR_SEL_SIGNAL_MASK (0x1 << 4) +#define RT5682_SAR_SEL_SIGNAL_AUTO (0x1 << 4) +#define RT5682_SAR_SEL_SIGNAL_MANU (0x0 << 4) + +/* SAR ADC Inline Command Control 13 (0x021c) */ +#define RT5682_SAR_SOUR_MASK (0x3f) +#define RT5682_SAR_SOUR_BTN (0x3f) +#define RT5682_SAR_SOUR_TYPE (0x0) + + +/* System Clock Source */ +enum { + RT5682_SCLK_S_MCLK, + RT5682_SCLK_S_PLL1, + RT5682_SCLK_S_PLL2, + RT5682_SCLK_S_RCCLK, +}; + +/* PLL Source */ +enum { + RT5682_PLL1_S_MCLK, + RT5682_PLL1_S_BCLK1, + RT5682_PLL1_S_RCCLK, +}; + +enum { + RT5682_AIF1, + RT5682_AIF2, + RT5682_AIFS +}; + +/* filter mask */ +enum { + RT5682_DA_STEREO1_FILTER = 0x1, + RT5682_AD_STEREO1_FILTER = (0x1 << 1), +}; + +enum { + RT5682_CLK_SEL_SYS, + RT5682_CLK_SEL_I2S1_ASRC, + RT5682_CLK_SEL_I2S2_ASRC, +}; + +int rt5682_sel_asrc_clk_src(struct snd_soc_component *component, + unsigned int filter_mask, unsigned int clk_src); + +#endif /* __RT5682_H__ */ -- cgit v1.2.3 From a7dc662c6a7b9209df600c64b16d33d72dbf56b1 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Sun, 17 Jun 2018 15:45:29 +0200 Subject: ASoC: codecs: PCM1789: unconditionally flush work Work is guaranteed to be initialized on exit. Drop the unnecessary if statement and always call flush_work. This fixes a warning seen with clang: sound/soc/codecs/pcm1789.c:265:13: warning: address of 'priv->work' will always evaluate to 'true' [-Wpointer-bool-conversion] if (&priv->work) ~~ ~~~~~~^~~~ Signed-off-by: Stefan Agner Signed-off-by: Mark Brown --- sound/soc/codecs/pcm1789.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/sound/soc/codecs/pcm1789.c b/sound/soc/codecs/pcm1789.c index 21f15219b3ad..8df6447c76a6 100644 --- a/sound/soc/codecs/pcm1789.c +++ b/sound/soc/codecs/pcm1789.c @@ -262,8 +262,7 @@ int pcm1789_common_exit(struct device *dev) { struct pcm1789_private *priv = dev_get_drvdata(dev); - if (&priv->work) - flush_work(&priv->work); + flush_work(&priv->work); return 0; } -- cgit v1.2.3 From e2b35e468c89000cf3b8b5beb63fd73dfa8a5435 Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Sun, 17 Jun 2018 12:50:00 +0200 Subject: ASoC: pxa: add binding for pxa2xx-ac97 audio complex This adds a binding for the Marvell PXA audio complex, available in pxa2xx and pxa3xx variants. Signed-off-by: Robert Jarzmik Signed-off-by: Mark Brown --- .../bindings/sound/marvell,pxa2xx-ac97.txt | 27 ++++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/marvell,pxa2xx-ac97.txt diff --git a/Documentation/devicetree/bindings/sound/marvell,pxa2xx-ac97.txt b/Documentation/devicetree/bindings/sound/marvell,pxa2xx-ac97.txt new file mode 100644 index 000000000000..2ea85d5be6a4 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/marvell,pxa2xx-ac97.txt @@ -0,0 +1,27 @@ +Marvell PXA2xx audio complex + +This descriptions matches the AC97 controller found in pxa2xx and pxa3xx series. + +Required properties: + - compatible: should be one of the following: + "marvell,pxa250-ac97" + "marvell,pxa270-ac97" + "marvell,pxa300-ac97" + - reg: device MMIO address space + - interrupts: single interrupt generated by AC97 IP + - clocks: input clock of the AC97 IP, refer to clock-bindings.txt + +Optional properties: + - pinctrl-names, pinctrl-0: refer to pinctrl-bindings.txt + - reset-gpios: gpio used for AC97 reset, refer to gpio.txt + +Example: + ac97: sound@40500000 { + compatible = "marvell,pxa250-ac97"; + reg = < 0x40500000 0x1000 >; + interrupts = <14>; + reset-gpios = <&gpio 113 GPIO_ACTIVE_HIGH>; + #sound-dai-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = < &pmux_ac97_default >; + }; -- cgit v1.2.3 From a4519526ebbd261e36425fa1c269515ee0648ab2 Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Sun, 17 Jun 2018 12:50:01 +0200 Subject: ASoC: pxa: add devicetree support Add the devicetree support, so that the driver can be used in a devictree platform. Signed-off-by: Robert Jarzmik Signed-off-by: Mark Brown --- sound/arm/pxa2xx-ac97-lib.c | 12 ++++++++++++ sound/soc/pxa/pxa2xx-ac97.c | 12 ++++++++++++ 2 files changed, 24 insertions(+) diff --git a/sound/arm/pxa2xx-ac97-lib.c b/sound/arm/pxa2xx-ac97-lib.c index 5950a9e218d9..8eafd3d3dff6 100644 --- a/sound/arm/pxa2xx-ac97-lib.c +++ b/sound/arm/pxa2xx-ac97-lib.c @@ -19,6 +19,7 @@ #include #include #include +#include #include @@ -337,6 +338,17 @@ int pxa2xx_ac97_hw_probe(struct platform_device *dev) dev_err(&dev->dev, "Invalid reset GPIO %d\n", pdata->reset_gpio); } + } else if (!pdata && dev->dev.of_node) { + pdata = devm_kzalloc(&dev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return -ENOMEM; + pdata->reset_gpio = of_get_named_gpio(dev->dev.of_node, + "reset-gpios", 0); + if (pdata->reset_gpio == -ENOENT) + pdata->reset_gpio = -1; + else if (pdata->reset_gpio < 0) + return pdata->reset_gpio; + reset_gpio = pdata->reset_gpio; } else { if (cpu_is_pxa27x()) reset_gpio = 113; diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c index 803818aabee9..5738a0abcd6a 100644 --- a/sound/soc/pxa/pxa2xx-ac97.c +++ b/sound/soc/pxa/pxa2xx-ac97.c @@ -238,6 +238,17 @@ static const struct snd_soc_component_driver pxa_ac97_component = { .name = "pxa-ac97", }; +#ifdef CONFIG_OF +static const struct of_device_id pxa2xx_ac97_dt_ids[] = { + { .compatible = "marvell,pxa250-ac97", }, + { .compatible = "marvell,pxa270-ac97", }, + { .compatible = "marvell,pxa300-ac97", }, + { } +}; +MODULE_DEVICE_TABLE(of, pxa2xx_ac97_dt_ids); + +#endif + static int pxa2xx_ac97_dev_probe(struct platform_device *pdev) { int ret; @@ -296,6 +307,7 @@ static struct platform_driver pxa2xx_ac97_driver = { #ifdef CONFIG_PM_SLEEP .pm = &pxa2xx_ac97_pm_ops, #endif + .of_match_table = of_match_ptr(pxa2xx_ac97_dt_ids), }, }; -- cgit v1.2.3 From 7c5dfd549617b87db8e891ff4ecaa4a582b6c4cc Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Sat, 16 Jun 2018 01:22:58 +0300 Subject: ASoC: tegra: fix device_node refcounting tegra_rt5677_probe() gets a couple of device nodes with of_parse_phandle(), but there is no release of them. The patch adds the release to tegra_rt5677_remove() and to error handling paths in the probe. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Reviewed-by: Nicholas Mc Guire Signed-off-by: Mark Brown --- sound/soc/tegra/tegra_rt5677.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) diff --git a/sound/soc/tegra/tegra_rt5677.c b/sound/soc/tegra/tegra_rt5677.c index 0e4805c7b4ca..7081f15302cc 100644 --- a/sound/soc/tegra/tegra_rt5677.c +++ b/sound/soc/tegra/tegra_rt5677.c @@ -264,13 +264,13 @@ static int tegra_rt5677_probe(struct platform_device *pdev) dev_err(&pdev->dev, "Property 'nvidia,i2s-controller' missing or invalid\n"); ret = -EINVAL; - goto err; + goto err_put_codec_of_node; } tegra_rt5677_dai.platform_of_node = tegra_rt5677_dai.cpu_of_node; ret = tegra_asoc_utils_init(&machine->util_data, &pdev->dev); if (ret) - goto err; + goto err_put_cpu_of_node; ret = snd_soc_register_card(card); if (ret) { @@ -283,6 +283,13 @@ static int tegra_rt5677_probe(struct platform_device *pdev) err_fini_utils: tegra_asoc_utils_fini(&machine->util_data); +err_put_cpu_of_node: + of_node_put(tegra_rt5677_dai.cpu_of_node); + tegra_rt5677_dai.cpu_of_node = NULL; + tegra_rt5677_dai.platform_of_node = NULL; +err_put_codec_of_node: + of_node_put(tegra_rt5677_dai.codec_of_node); + tegra_rt5677_dai.codec_of_node = NULL; err: return ret; } @@ -296,6 +303,12 @@ static int tegra_rt5677_remove(struct platform_device *pdev) tegra_asoc_utils_fini(&machine->util_data); + tegra_rt5677_dai.platform_of_node = NULL; + of_node_put(tegra_rt5677_dai.codec_of_node); + tegra_rt5677_dai.codec_of_node = NULL; + of_node_put(tegra_rt5677_dai.cpu_of_node); + tegra_rt5677_dai.cpu_of_node = NULL; + return 0; } -- cgit v1.2.3 From 6cea3590820819049df5945136b8a5acd72ed0f8 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 3 Jun 2018 15:42:31 +0200 Subject: ASoC: Intel: bytcr_rt5640: Add quirk for the Nuvison/TMax TM800W560 tablet Add a quirk for the Nuvison/TMax TM800W560 tablet, this tablet uses IN1 for the internal mic rather then the default IN3 and it uses JD2 rather then JD1 for its not-inverted jack-detect switch. Signed-off-by: Hans de Goede Acked-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- sound/soc/intel/boards/bytcr_rt5640.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index 5c4f9ea40f57..8571f41767ef 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -565,6 +565,20 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { BYT_RT5640_DIFF_MIC | BYT_RT5640_MCLK_EN), }, + { /* Nuvison/TMax TM800W560 */ + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "TMAX"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "TM800W560L"), + }, + .driver_data = (void *)(BYT_RT5640_IN1_MAP | + BYT_RT5640_JD_SRC_JD2_IN4N | + BYT_RT5640_OVCD_TH_2000UA | + BYT_RT5640_OVCD_SF_0P75 | + BYT_RT5640_JD_NOT_INV | + BYT_RT5640_DIFF_MIC | + BYT_RT5640_SSP0_AIF1 | + BYT_RT5640_MCLK_EN), + }, { /* Pipo W4 */ .matches = { DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"), -- cgit v1.2.3 From f12a0a3c4cc6f594d7c2ea361f2396ae5c518d2c Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 3 Jun 2018 15:42:32 +0200 Subject: ASoC: Intel: bytcr_rt5640: Fix Acer Iconia 8 over-current detect threshold Change the over-current detect threshold on the Acer Iconia 8 from 2000ua to 1500uA, this fixes headset button presses not being detected. Signed-off-by: Hans de Goede Acked-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- sound/soc/intel/boards/bytcr_rt5640.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index 8571f41767ef..7456566c5648 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -404,7 +404,7 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { }, .driver_data = (void *)(BYT_RT5640_DMIC1_MAP | BYT_RT5640_JD_SRC_JD1_IN4P | - BYT_RT5640_OVCD_TH_2000UA | + BYT_RT5640_OVCD_TH_1500UA | BYT_RT5640_OVCD_SF_0P75 | BYT_RT5640_SSP0_AIF1 | BYT_RT5640_MCLK_EN), -- cgit v1.2.3 From 420c0117db25db38b72b6230223f7a976d3070ea Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Sun, 17 Jun 2018 19:02:04 +0200 Subject: dmaengine: pxa: use a dma slave map In order to remove the specific knowledge of the dma mapping from PXA drivers, add a default slave map for pxa architectures. This won't impact MMP architecture, but is aimed only at all PXA boards. This is the first step, and once all drivers are converted, pxad_filter_fn() will be made static, and the DMA resources removed from device.c. Signed-off-by: Robert Jarzmik Reported-by: Arnd Bergmann Acked-by: Vinod Koul --- drivers/dma/pxa_dma.c | 10 +++++++++- include/linux/platform_data/mmp_dma.h | 4 ++++ 2 files changed, 13 insertions(+), 1 deletion(-) diff --git a/drivers/dma/pxa_dma.c b/drivers/dma/pxa_dma.c index b53fb618bbf6..9505334f9c6e 100644 --- a/drivers/dma/pxa_dma.c +++ b/drivers/dma/pxa_dma.c @@ -179,6 +179,8 @@ static unsigned int pxad_drcmr(unsigned int line) return 0x1000 + line * 4; } +bool pxad_filter_fn(struct dma_chan *chan, void *param); + /* * Debug fs */ @@ -1396,9 +1398,10 @@ static int pxad_probe(struct platform_device *op) { struct pxad_device *pdev; const struct of_device_id *of_id; + const struct dma_slave_map *slave_map = NULL; struct mmp_dma_platdata *pdata = dev_get_platdata(&op->dev); struct resource *iores; - int ret, dma_channels = 0, nb_requestors = 0; + int ret, dma_channels = 0, nb_requestors = 0, slave_map_cnt = 0; const enum dma_slave_buswidth widths = DMA_SLAVE_BUSWIDTH_1_BYTE | DMA_SLAVE_BUSWIDTH_2_BYTES | DMA_SLAVE_BUSWIDTH_4_BYTES; @@ -1429,6 +1432,8 @@ static int pxad_probe(struct platform_device *op) } else if (pdata && pdata->dma_channels) { dma_channels = pdata->dma_channels; nb_requestors = pdata->nb_requestors; + slave_map = pdata->slave_map; + slave_map_cnt = pdata->slave_map_cnt; } else { dma_channels = 32; /* default 32 channel */ } @@ -1440,6 +1445,9 @@ static int pxad_probe(struct platform_device *op) pdev->slave.device_prep_dma_memcpy = pxad_prep_memcpy; pdev->slave.device_prep_slave_sg = pxad_prep_slave_sg; pdev->slave.device_prep_dma_cyclic = pxad_prep_dma_cyclic; + pdev->slave.filter.map = slave_map; + pdev->slave.filter.mapcnt = slave_map_cnt; + pdev->slave.filter.fn = pxad_filter_fn; pdev->slave.copy_align = PDMA_ALIGNMENT; pdev->slave.src_addr_widths = widths; diff --git a/include/linux/platform_data/mmp_dma.h b/include/linux/platform_data/mmp_dma.h index d1397c8ed94e..6397b9c8149a 100644 --- a/include/linux/platform_data/mmp_dma.h +++ b/include/linux/platform_data/mmp_dma.h @@ -12,9 +12,13 @@ #ifndef MMP_DMA_H #define MMP_DMA_H +struct dma_slave_map; + struct mmp_dma_platdata { int dma_channels; int nb_requestors; + int slave_map_cnt; + const struct dma_slave_map *slave_map; }; #endif /* MMP_DMA_H */ -- cgit v1.2.3 From 1da10c17afd1109ae22d529c3b16d9f6de3fdbec Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Sun, 17 Jun 2018 19:02:05 +0200 Subject: ARM: pxa: add dma slave map In order to remove the specific knowledge of the dma mapping from PXA drivers, add a default slave map for pxa architectures. This is the first step, and once all drivers are converted, pxad_filter_fn() will be made static, and the DMA resources removed from device.c. Signed-off-by: Robert Jarzmik Reported-by: Arnd Bergmann --- arch/arm/mach-pxa/devices.c | 12 +++--------- arch/arm/mach-pxa/devices.h | 6 +++++- arch/arm/mach-pxa/pxa25x.c | 38 +++++++++++++++++++++++++++++++++++++- arch/arm/mach-pxa/pxa27x.c | 39 ++++++++++++++++++++++++++++++++++++++- arch/arm/mach-pxa/pxa3xx.c | 41 ++++++++++++++++++++++++++++++++++++++++- 5 files changed, 123 insertions(+), 13 deletions(-) diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index d7c9a8476d57..1e8915fc340d 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -4,6 +4,7 @@ #include #include #include +#include #include #include @@ -1202,11 +1203,6 @@ void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info) platform_device_add(pd); } -static struct mmp_dma_platdata pxa_dma_pdata = { - .dma_channels = 0, - .nb_requestors = 0, -}; - static struct resource pxa_dma_resource[] = { [0] = { .start = 0x40000000, @@ -1233,9 +1229,7 @@ static struct platform_device pxa2xx_pxa_dma = { .resource = pxa_dma_resource, }; -void __init pxa2xx_set_dmac_info(int nb_channels, int nb_requestors) +void __init pxa2xx_set_dmac_info(struct mmp_dma_platdata *dma_pdata) { - pxa_dma_pdata.dma_channels = nb_channels; - pxa_dma_pdata.nb_requestors = nb_requestors; - pxa_register_device(&pxa2xx_pxa_dma, &pxa_dma_pdata); + pxa_register_device(&pxa2xx_pxa_dma, dma_pdata); } diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h index 11263f7c455b..498b07bc6a3e 100644 --- a/arch/arm/mach-pxa/devices.h +++ b/arch/arm/mach-pxa/devices.h @@ -1,4 +1,8 @@ /* SPDX-License-Identifier: GPL-2.0 */ +#define PDMA_FILTER_PARAM(_prio, _requestor) (&(struct pxad_param) { \ + .prio = PXAD_PRIO_##_prio, .drcmr = _requestor }) +struct mmp_dma_platdata; + extern struct platform_device pxa_device_pmu; extern struct platform_device pxa_device_mci; extern struct platform_device pxa3xx_device_mci2; @@ -55,7 +59,7 @@ extern struct platform_device pxa3xx_device_gpio; extern struct platform_device pxa93x_device_gpio; void __init pxa_register_device(struct platform_device *dev, void *data); -void __init pxa2xx_set_dmac_info(int nb_channels, int nb_requestors); +void __init pxa2xx_set_dmac_info(struct mmp_dma_platdata *dma_pdata); struct i2c_pxa_platform_data; extern void pxa_set_i2c_info(struct i2c_pxa_platform_data *info); diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index ba431fad5c47..ab8808ce7e21 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -16,6 +16,8 @@ * initialization stuff for PXA machines which can be overridden later if * need be. */ +#include +#include #include #include #include @@ -26,6 +28,7 @@ #include #include #include +#include #include #include @@ -201,6 +204,39 @@ static struct platform_device *pxa25x_devices[] __initdata = { &pxa_device_asoc_platform, }; +static const struct dma_slave_map pxa25x_slave_map[] = { + /* PXA25x, PXA27x and PXA3xx common entries */ + { "pxa2xx-ac97", "pcm_pcm_mic_mono", PDMA_FILTER_PARAM(LOWEST, 8) }, + { "pxa2xx-ac97", "pcm_pcm_aux_mono_in", PDMA_FILTER_PARAM(LOWEST, 9) }, + { "pxa2xx-ac97", "pcm_pcm_aux_mono_out", + PDMA_FILTER_PARAM(LOWEST, 10) }, + { "pxa2xx-ac97", "pcm_pcm_stereo_in", PDMA_FILTER_PARAM(LOWEST, 11) }, + { "pxa2xx-ac97", "pcm_pcm_stereo_out", PDMA_FILTER_PARAM(LOWEST, 12) }, + { "pxa-ssp-dai.1", "rx", PDMA_FILTER_PARAM(LOWEST, 13) }, + { "pxa-ssp-dai.1", "tx", PDMA_FILTER_PARAM(LOWEST, 14) }, + { "pxa-ssp-dai.2", "rx", PDMA_FILTER_PARAM(LOWEST, 15) }, + { "pxa-ssp-dai.2", "tx", PDMA_FILTER_PARAM(LOWEST, 16) }, + { "pxa2xx-ir", "rx", PDMA_FILTER_PARAM(LOWEST, 17) }, + { "pxa2xx-ir", "tx", PDMA_FILTER_PARAM(LOWEST, 18) }, + { "pxa2xx-mci.0", "rx", PDMA_FILTER_PARAM(LOWEST, 21) }, + { "pxa2xx-mci.0", "tx", PDMA_FILTER_PARAM(LOWEST, 22) }, + + /* PXA25x specific map */ + { "pxa25x-ssp.0", "rx", PDMA_FILTER_PARAM(LOWEST, 13) }, + { "pxa25x-ssp.0", "tx", PDMA_FILTER_PARAM(LOWEST, 14) }, + { "pxa25x-nssp.1", "rx", PDMA_FILTER_PARAM(LOWEST, 15) }, + { "pxa25x-nssp.1", "tx", PDMA_FILTER_PARAM(LOWEST, 16) }, + { "pxa25x-nssp.2", "rx", PDMA_FILTER_PARAM(LOWEST, 23) }, + { "pxa25x-nssp.2", "tx", PDMA_FILTER_PARAM(LOWEST, 24) }, +}; + +static struct mmp_dma_platdata pxa25x_dma_pdata = { + .dma_channels = 16, + .nb_requestors = 40, + .slave_map = pxa25x_slave_map, + .slave_map_cnt = ARRAY_SIZE(pxa25x_slave_map), +}; + static int __init pxa25x_init(void) { int ret = 0; @@ -215,7 +251,7 @@ static int __init pxa25x_init(void) register_syscore_ops(&pxa2xx_mfp_syscore_ops); if (!of_have_populated_dt()) { - pxa2xx_set_dmac_info(16, 40); + pxa2xx_set_dmac_info(&pxa25x_dma_pdata); pxa_register_device(&pxa25x_device_gpio, &pxa25x_gpio_info); ret = platform_add_devices(pxa25x_devices, ARRAY_SIZE(pxa25x_devices)); diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 0c06f383ad52..5a8990a9313d 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -11,6 +11,8 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include +#include #include #include #include @@ -23,6 +25,7 @@ #include #include #include +#include #include #include @@ -297,6 +300,40 @@ static struct platform_device *devices[] __initdata = { &pxa27x_device_pwm1, }; +static const struct dma_slave_map pxa27x_slave_map[] = { + /* PXA25x, PXA27x and PXA3xx common entries */ + { "pxa2xx-ac97", "pcm_pcm_mic_mono", PDMA_FILTER_PARAM(LOWEST, 8) }, + { "pxa2xx-ac97", "pcm_pcm_aux_mono_in", PDMA_FILTER_PARAM(LOWEST, 9) }, + { "pxa2xx-ac97", "pcm_pcm_aux_mono_out", + PDMA_FILTER_PARAM(LOWEST, 10) }, + { "pxa2xx-ac97", "pcm_pcm_stereo_in", PDMA_FILTER_PARAM(LOWEST, 11) }, + { "pxa2xx-ac97", "pcm_pcm_stereo_out", PDMA_FILTER_PARAM(LOWEST, 12) }, + { "pxa-ssp-dai.0", "rx", PDMA_FILTER_PARAM(LOWEST, 13) }, + { "pxa-ssp-dai.0", "tx", PDMA_FILTER_PARAM(LOWEST, 14) }, + { "pxa-ssp-dai.1", "rx", PDMA_FILTER_PARAM(LOWEST, 15) }, + { "pxa-ssp-dai.1", "tx", PDMA_FILTER_PARAM(LOWEST, 16) }, + { "pxa2xx-ir", "rx", PDMA_FILTER_PARAM(LOWEST, 17) }, + { "pxa2xx-ir", "tx", PDMA_FILTER_PARAM(LOWEST, 18) }, + { "pxa2xx-mci.0", "rx", PDMA_FILTER_PARAM(LOWEST, 21) }, + { "pxa2xx-mci.0", "tx", PDMA_FILTER_PARAM(LOWEST, 22) }, + { "pxa-ssp-dai.2", "rx", PDMA_FILTER_PARAM(LOWEST, 66) }, + { "pxa-ssp-dai.2", "tx", PDMA_FILTER_PARAM(LOWEST, 67) }, + + /* PXA27x specific map */ + { "pxa2xx-i2s", "rx", PDMA_FILTER_PARAM(LOWEST, 2) }, + { "pxa2xx-i2s", "tx", PDMA_FILTER_PARAM(LOWEST, 3) }, + { "pxa27x-camera.0", "CI_Y", PDMA_FILTER_PARAM(HIGHEST, 68) }, + { "pxa27x-camera.0", "CI_U", PDMA_FILTER_PARAM(HIGHEST, 69) }, + { "pxa27x-camera.0", "CI_V", PDMA_FILTER_PARAM(HIGHEST, 70) }, +}; + +static struct mmp_dma_platdata pxa27x_dma_pdata = { + .dma_channels = 32, + .nb_requestors = 75, + .slave_map = pxa27x_slave_map, + .slave_map_cnt = ARRAY_SIZE(pxa27x_slave_map), +}; + static int __init pxa27x_init(void) { int ret = 0; @@ -313,7 +350,7 @@ static int __init pxa27x_init(void) if (!of_have_populated_dt()) { pxa_register_device(&pxa27x_device_gpio, &pxa27x_gpio_info); - pxa2xx_set_dmac_info(32, 75); + pxa2xx_set_dmac_info(&pxa27x_dma_pdata); ret = platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 8c64f93b669b..df9c8970adcf 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -12,6 +12,8 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include +#include #include #include #include @@ -24,6 +26,7 @@ #include #include #include +#include #include #include @@ -421,6 +424,42 @@ static struct platform_device *devices[] __initdata = { &pxa27x_device_pwm1, }; +static const struct dma_slave_map pxa3xx_slave_map[] = { + /* PXA25x, PXA27x and PXA3xx common entries */ + { "pxa2xx-ac97", "pcm_pcm_mic_mono", PDMA_FILTER_PARAM(LOWEST, 8) }, + { "pxa2xx-ac97", "pcm_pcm_aux_mono_in", PDMA_FILTER_PARAM(LOWEST, 9) }, + { "pxa2xx-ac97", "pcm_pcm_aux_mono_out", + PDMA_FILTER_PARAM(LOWEST, 10) }, + { "pxa2xx-ac97", "pcm_pcm_stereo_in", PDMA_FILTER_PARAM(LOWEST, 11) }, + { "pxa2xx-ac97", "pcm_pcm_stereo_out", PDMA_FILTER_PARAM(LOWEST, 12) }, + { "pxa-ssp-dai.0", "rx", PDMA_FILTER_PARAM(LOWEST, 13) }, + { "pxa-ssp-dai.0", "tx", PDMA_FILTER_PARAM(LOWEST, 14) }, + { "pxa-ssp-dai.1", "rx", PDMA_FILTER_PARAM(LOWEST, 15) }, + { "pxa-ssp-dai.1", "tx", PDMA_FILTER_PARAM(LOWEST, 16) }, + { "pxa2xx-ir", "rx", PDMA_FILTER_PARAM(LOWEST, 17) }, + { "pxa2xx-ir", "tx", PDMA_FILTER_PARAM(LOWEST, 18) }, + { "pxa2xx-mci.0", "rx", PDMA_FILTER_PARAM(LOWEST, 21) }, + { "pxa2xx-mci.0", "tx", PDMA_FILTER_PARAM(LOWEST, 22) }, + { "pxa-ssp-dai.2", "rx", PDMA_FILTER_PARAM(LOWEST, 66) }, + { "pxa-ssp-dai.2", "tx", PDMA_FILTER_PARAM(LOWEST, 67) }, + + /* PXA3xx specific map */ + { "pxa-ssp-dai.3", "rx", PDMA_FILTER_PARAM(LOWEST, 2) }, + { "pxa-ssp-dai.3", "tx", PDMA_FILTER_PARAM(LOWEST, 3) }, + { "pxa2xx-mci.1", "rx", PDMA_FILTER_PARAM(LOWEST, 93) }, + { "pxa2xx-mci.1", "tx", PDMA_FILTER_PARAM(LOWEST, 94) }, + { "pxa3xx-nand", "data", PDMA_FILTER_PARAM(LOWEST, 97) }, + { "pxa2xx-mci.2", "rx", PDMA_FILTER_PARAM(LOWEST, 100) }, + { "pxa2xx-mci.2", "tx", PDMA_FILTER_PARAM(LOWEST, 101) }, +}; + +static struct mmp_dma_platdata pxa3xx_dma_pdata = { + .dma_channels = 32, + .nb_requestors = 100, + .slave_map = pxa3xx_slave_map, + .slave_map_cnt = ARRAY_SIZE(pxa3xx_slave_map), +}; + static int __init pxa3xx_init(void) { int ret = 0; @@ -456,7 +495,7 @@ static int __init pxa3xx_init(void) if (of_have_populated_dt()) return 0; - pxa2xx_set_dmac_info(32, 100); + pxa2xx_set_dmac_info(&pxa3xx_dma_pdata); ret = platform_add_devices(devices, ARRAY_SIZE(devices)); if (ret) return ret; -- cgit v1.2.3 From 88a0513cf6114bbabbd3a158f039dbd03f49e0bf Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Sun, 17 Jun 2018 19:02:06 +0200 Subject: dmaengine: pxa: add a default requestor policy As what former drcmr -1 value meant, add a this as a default to each channel, ie. that by default no requestor line is used. This is specifically used for network drivers smc91x and smc911x, and needed for their port to slave maps. Cc: Arnd Bergmann Signed-off-by: Robert Jarzmik Acked-by: Vinod Koul --- drivers/dma/pxa_dma.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/dma/pxa_dma.c b/drivers/dma/pxa_dma.c index 9505334f9c6e..b31c28b67ad3 100644 --- a/drivers/dma/pxa_dma.c +++ b/drivers/dma/pxa_dma.c @@ -762,6 +762,8 @@ static void pxad_free_chan_resources(struct dma_chan *dchan) dma_pool_destroy(chan->desc_pool); chan->desc_pool = NULL; + chan->drcmr = U32_MAX; + chan->prio = PXAD_PRIO_LOWEST; } static void pxad_free_desc(struct virt_dma_desc *vd) @@ -1386,6 +1388,9 @@ static int pxad_init_dmadev(struct platform_device *op, c = devm_kzalloc(&op->dev, sizeof(*c), GFP_KERNEL); if (!c) return -ENOMEM; + + c->drcmr = U32_MAX; + c->prio = PXAD_PRIO_LOWEST; c->vc.desc_free = pxad_free_desc; vchan_init(&c->vc, &pdev->slave); init_waitqueue_head(&c->wq_state); -- cgit v1.2.3 From 6b3348f9e6eb35d2c2d49ffa274039ef9a901adc Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Sun, 17 Jun 2018 19:02:07 +0200 Subject: mmc: pxamci: remove the dmaengine compat need As the pxa architecture switched towards the dmaengine slave map, the old compatibility mechanism to acquire the dma requestor line number and priority are not needed anymore. This patch simplifies the dma resource acquisition, using the more generic function dma_request_slave_channel(). Signed-off-by: Robert Jarzmik Acked-by: Ulf Hansson --- drivers/mmc/host/pxamci.c | 29 +++-------------------------- 1 file changed, 3 insertions(+), 26 deletions(-) diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c index c763b404510f..6c94474e36f4 100644 --- a/drivers/mmc/host/pxamci.c +++ b/drivers/mmc/host/pxamci.c @@ -24,7 +24,6 @@ #include #include #include -#include #include #include #include @@ -637,10 +636,8 @@ static int pxamci_probe(struct platform_device *pdev) { struct mmc_host *mmc; struct pxamci_host *host = NULL; - struct resource *r, *dmarx, *dmatx; - struct pxad_param param_rx, param_tx; + struct resource *r; int ret, irq, gpio_cd = -1, gpio_ro = -1, gpio_power = -1; - dma_cap_mask_t mask; ret = pxamci_of_init(pdev); if (ret) @@ -739,34 +736,14 @@ static int pxamci_probe(struct platform_device *pdev) platform_set_drvdata(pdev, mmc); - if (!pdev->dev.of_node) { - dmarx = platform_get_resource(pdev, IORESOURCE_DMA, 0); - dmatx = platform_get_resource(pdev, IORESOURCE_DMA, 1); - if (!dmarx || !dmatx) { - ret = -ENXIO; - goto out; - } - param_rx.prio = PXAD_PRIO_LOWEST; - param_rx.drcmr = dmarx->start; - param_tx.prio = PXAD_PRIO_LOWEST; - param_tx.drcmr = dmatx->start; - } - - dma_cap_zero(mask); - dma_cap_set(DMA_SLAVE, mask); - - host->dma_chan_rx = - dma_request_slave_channel_compat(mask, pxad_filter_fn, - ¶m_rx, &pdev->dev, "rx"); + host->dma_chan_rx = dma_request_slave_channel(&pdev->dev, "rx"); if (host->dma_chan_rx == NULL) { dev_err(&pdev->dev, "unable to request rx dma channel\n"); ret = -ENODEV; goto out; } - host->dma_chan_tx = - dma_request_slave_channel_compat(mask, pxad_filter_fn, - ¶m_tx, &pdev->dev, "tx"); + host->dma_chan_tx = dma_request_slave_channel(&pdev->dev, "tx"); if (host->dma_chan_tx == NULL) { dev_err(&pdev->dev, "unable to request tx dma channel\n"); ret = -ENODEV; -- cgit v1.2.3 From f727b6cda449184188d8a64987f194687bf01782 Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Sun, 17 Jun 2018 19:02:08 +0200 Subject: media: pxa_camera: remove the dmaengine compat need As the pxa architecture switched towards the dmaengine slave map, the old compatibility mechanism to acquire the dma requestor line number and priority are not needed anymore. This patch simplifies the dma resource acquisition, using the more generic function dma_request_slave_channel(). Signed-off-by: Robert Jarzmik Acked-by: Hans Verkuil Acked-by: Mauro Carvalho Chehab --- drivers/media/platform/pxa_camera.c | 22 +++------------------- 1 file changed, 3 insertions(+), 19 deletions(-) diff --git a/drivers/media/platform/pxa_camera.c b/drivers/media/platform/pxa_camera.c index d85ffbfb7c1f..b6e9e93bde7a 100644 --- a/drivers/media/platform/pxa_camera.c +++ b/drivers/media/platform/pxa_camera.c @@ -2375,8 +2375,6 @@ static int pxa_camera_probe(struct platform_device *pdev) .src_maxburst = 8, .direction = DMA_DEV_TO_MEM, }; - dma_cap_mask_t mask; - struct pxad_param params; char clk_name[V4L2_CLK_NAME_SIZE]; int irq; int err = 0, i; @@ -2450,34 +2448,20 @@ static int pxa_camera_probe(struct platform_device *pdev) pcdev->base = base; /* request dma */ - dma_cap_zero(mask); - dma_cap_set(DMA_SLAVE, mask); - dma_cap_set(DMA_PRIVATE, mask); - - params.prio = 0; - params.drcmr = 68; - pcdev->dma_chans[0] = - dma_request_slave_channel_compat(mask, pxad_filter_fn, - ¶ms, &pdev->dev, "CI_Y"); + pcdev->dma_chans[0] = dma_request_slave_channel(&pdev->dev, "CI_Y"); if (!pcdev->dma_chans[0]) { dev_err(&pdev->dev, "Can't request DMA for Y\n"); return -ENODEV; } - params.drcmr = 69; - pcdev->dma_chans[1] = - dma_request_slave_channel_compat(mask, pxad_filter_fn, - ¶ms, &pdev->dev, "CI_U"); + pcdev->dma_chans[1] = dma_request_slave_channel(&pdev->dev, "CI_U"); if (!pcdev->dma_chans[1]) { dev_err(&pdev->dev, "Can't request DMA for Y\n"); err = -ENODEV; goto exit_free_dma_y; } - params.drcmr = 70; - pcdev->dma_chans[2] = - dma_request_slave_channel_compat(mask, pxad_filter_fn, - ¶ms, &pdev->dev, "CI_V"); + pcdev->dma_chans[2] = dma_request_slave_channel(&pdev->dev, "CI_V"); if (!pcdev->dma_chans[2]) { dev_err(&pdev->dev, "Can't request DMA for V\n"); err = -ENODEV; -- cgit v1.2.3 From ac75a50b6de3b092d084fdd9818707d0d5073ad6 Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Sun, 17 Jun 2018 19:02:09 +0200 Subject: mtd: rawnand: marvell: remove the dmaengine compat need As the pxa architecture switched towards the dmaengine slave map, the old compatibility mechanism to acquire the dma requestor line number and priority are not needed anymore. This patch simplifies the dma resource acquisition, using the more generic function dma_request_slave_channel(). Signed-off-by: Daniel Mack Signed-off-by: Robert Jarzmik Acked-by: Miquel Raynal --- drivers/mtd/nand/raw/marvell_nand.c | 17 +---------------- 1 file changed, 1 insertion(+), 16 deletions(-) diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c index ebb1d141b900..00d9f29bbdb6 100644 --- a/drivers/mtd/nand/raw/marvell_nand.c +++ b/drivers/mtd/nand/raw/marvell_nand.c @@ -2612,8 +2612,6 @@ static int marvell_nfc_init_dma(struct marvell_nfc *nfc) dev); struct dma_slave_config config = {}; struct resource *r; - dma_cap_mask_t mask; - struct pxad_param param; int ret; if (!IS_ENABLED(CONFIG_PXA_DMA)) { @@ -2626,20 +2624,7 @@ static int marvell_nfc_init_dma(struct marvell_nfc *nfc) if (ret) return ret; - r = platform_get_resource(pdev, IORESOURCE_DMA, 0); - if (!r) { - dev_err(nfc->dev, "No resource defined for data DMA\n"); - return -ENXIO; - } - - param.drcmr = r->start; - param.prio = PXAD_PRIO_LOWEST; - dma_cap_zero(mask); - dma_cap_set(DMA_SLAVE, mask); - nfc->dma_chan = - dma_request_slave_channel_compat(mask, pxad_filter_fn, - ¶m, nfc->dev, - "data"); + nfc->dma_chan = dma_request_slave_channel(nfc->dev, "data"); if (!nfc->dma_chan) { dev_err(nfc->dev, "Unable to request data DMA channel\n"); -- cgit v1.2.3 From 273340e8bf86de53eef7073993352ea11c563696 Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Sun, 17 Jun 2018 19:02:13 +0200 Subject: ata: pata_pxa: remove the dmaengine compat need As the pxa architecture switched towards the dmaengine slave map, the old compatibility mechanism to acquire the dma requestor line number and priority are not needed anymore. This patch simplifies the dma resource acquisition, using the more generic function dma_request_slave_channel(). Signed-off-by: Robert Jarzmik Acked-by: Bartlomiej Zolnierkiewicz --- drivers/ata/pata_pxa.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) diff --git a/drivers/ata/pata_pxa.c b/drivers/ata/pata_pxa.c index f6c46e9a4dc0..e8b6a2e464c9 100644 --- a/drivers/ata/pata_pxa.c +++ b/drivers/ata/pata_pxa.c @@ -25,7 +25,6 @@ #include #include #include -#include #include #include #include @@ -180,8 +179,6 @@ static int pxa_ata_probe(struct platform_device *pdev) struct resource *irq_res; struct pata_pxa_pdata *pdata = dev_get_platdata(&pdev->dev); struct dma_slave_config config; - dma_cap_mask_t mask; - struct pxad_param param; int ret = 0; /* @@ -278,10 +275,6 @@ static int pxa_ata_probe(struct platform_device *pdev) ap->private_data = data; - dma_cap_zero(mask); - dma_cap_set(DMA_SLAVE, mask); - param.prio = PXAD_PRIO_LOWEST; - param.drcmr = pdata->dma_dreq; memset(&config, 0, sizeof(config)); config.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; config.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; @@ -294,8 +287,7 @@ static int pxa_ata_probe(struct platform_device *pdev) * Request the DMA channel */ data->dma_chan = - dma_request_slave_channel_compat(mask, pxad_filter_fn, - ¶m, &pdev->dev, "data"); + dma_request_slave_channel(&pdev->dev, "data"); if (!data->dma_chan) return -EBUSY; ret = dmaengine_slave_config(data->dma_chan, &config); -- cgit v1.2.3 From b6d1a17f4729e4fda5740a855da91d202db2c118 Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Sun, 17 Jun 2018 19:02:14 +0200 Subject: dmaengine: pxa: document pxad_param Add some documentation for the pxad_param structure, and describe the contract behind the minimal required priority of a DMA channel. Signed-off-by: Robert Jarzmik Acked-by: Vinod Koul --- include/linux/dma/pxa-dma.h | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/include/linux/dma/pxa-dma.h b/include/linux/dma/pxa-dma.h index e56ec7af4fd7..9fc594f69eff 100644 --- a/include/linux/dma/pxa-dma.h +++ b/include/linux/dma/pxa-dma.h @@ -9,6 +9,15 @@ enum pxad_chan_prio { PXAD_PRIO_LOWEST, }; +/** + * struct pxad_param - dma channel request parameters + * @drcmr: requestor line number + * @prio: minimal mandatory priority of the channel + * + * If a requested channel is granted, its priority will be at least @prio, + * ie. if PXAD_PRIO_LOW is required, the requested channel will be either + * PXAD_PRIO_LOW, PXAD_PRIO_NORMAL or PXAD_PRIO_HIGHEST. + */ struct pxad_param { unsigned int drcmr; enum pxad_chan_prio prio; -- cgit v1.2.3 From b77ed2e6d61d40117272be1b2377c5dfd101e9cd Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Sun, 17 Jun 2018 19:02:16 +0200 Subject: ARM: pxa: remove the DMA IO resources As the last driver using the former mechanism to acquire the DMA requestor line has be converted to the dma_slave_map, remove all these resources from the PXA devices. Signed-off-by: Robert Jarzmik --- arch/arm/mach-pxa/devices.c | 136 -------------------------------------------- 1 file changed, 136 deletions(-) diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 1e8915fc340d..5a16ea74e28a 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -60,16 +60,6 @@ static struct resource pxamci_resources[] = { .end = IRQ_MMC, .flags = IORESOURCE_IRQ, }, - [2] = { - .start = 21, - .end = 21, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = 22, - .end = 22, - .flags = IORESOURCE_DMA, - }, }; static u64 pxamci_dmamask = 0xffffffffUL; @@ -407,16 +397,6 @@ static struct resource pxa_ir_resources[] = { .end = 0x40700023, .flags = IORESOURCE_MEM, }, - [5] = { - .start = 17, - .end = 17, - .flags = IORESOURCE_DMA, - }, - [6] = { - .start = 18, - .end = 18, - .flags = IORESOURCE_DMA, - }, }; struct platform_device pxa_device_ficp = { @@ -545,18 +525,6 @@ static struct resource pxa25x_resource_ssp[] = { .end = IRQ_SSP, .flags = IORESOURCE_IRQ, }, - [2] = { - /* DRCMR for RX */ - .start = 13, - .end = 13, - .flags = IORESOURCE_DMA, - }, - [3] = { - /* DRCMR for TX */ - .start = 14, - .end = 14, - .flags = IORESOURCE_DMA, - }, }; struct platform_device pxa25x_device_ssp = { @@ -583,18 +551,6 @@ static struct resource pxa25x_resource_nssp[] = { .end = IRQ_NSSP, .flags = IORESOURCE_IRQ, }, - [2] = { - /* DRCMR for RX */ - .start = 15, - .end = 15, - .flags = IORESOURCE_DMA, - }, - [3] = { - /* DRCMR for TX */ - .start = 16, - .end = 16, - .flags = IORESOURCE_DMA, - }, }; struct platform_device pxa25x_device_nssp = { @@ -621,18 +577,6 @@ static struct resource pxa25x_resource_assp[] = { .end = IRQ_ASSP, .flags = IORESOURCE_IRQ, }, - [2] = { - /* DRCMR for RX */ - .start = 23, - .end = 23, - .flags = IORESOURCE_DMA, - }, - [3] = { - /* DRCMR for TX */ - .start = 24, - .end = 24, - .flags = IORESOURCE_DMA, - }, }; struct platform_device pxa25x_device_assp = { @@ -751,18 +695,6 @@ static struct resource pxa27x_resource_ssp1[] = { .end = IRQ_SSP, .flags = IORESOURCE_IRQ, }, - [2] = { - /* DRCMR for RX */ - .start = 13, - .end = 13, - .flags = IORESOURCE_DMA, - }, - [3] = { - /* DRCMR for TX */ - .start = 14, - .end = 14, - .flags = IORESOURCE_DMA, - }, }; struct platform_device pxa27x_device_ssp1 = { @@ -789,18 +721,6 @@ static struct resource pxa27x_resource_ssp2[] = { .end = IRQ_SSP2, .flags = IORESOURCE_IRQ, }, - [2] = { - /* DRCMR for RX */ - .start = 15, - .end = 15, - .flags = IORESOURCE_DMA, - }, - [3] = { - /* DRCMR for TX */ - .start = 16, - .end = 16, - .flags = IORESOURCE_DMA, - }, }; struct platform_device pxa27x_device_ssp2 = { @@ -827,18 +747,6 @@ static struct resource pxa27x_resource_ssp3[] = { .end = IRQ_SSP3, .flags = IORESOURCE_IRQ, }, - [2] = { - /* DRCMR for RX */ - .start = 66, - .end = 66, - .flags = IORESOURCE_DMA, - }, - [3] = { - /* DRCMR for TX */ - .start = 67, - .end = 67, - .flags = IORESOURCE_DMA, - }, }; struct platform_device pxa27x_device_ssp3 = { @@ -895,16 +803,6 @@ static struct resource pxa3xx_resources_mci2[] = { .end = IRQ_MMC2, .flags = IORESOURCE_IRQ, }, - [2] = { - .start = 93, - .end = 93, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = 94, - .end = 94, - .flags = IORESOURCE_DMA, - }, }; struct platform_device pxa3xx_device_mci2 = { @@ -934,16 +832,6 @@ static struct resource pxa3xx_resources_mci3[] = { .end = IRQ_MMC3, .flags = IORESOURCE_IRQ, }, - [2] = { - .start = 100, - .end = 100, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = 101, - .end = 101, - .flags = IORESOURCE_DMA, - }, }; struct platform_device pxa3xx_device_mci3 = { @@ -1021,18 +909,6 @@ static struct resource pxa3xx_resources_nand[] = { .end = IRQ_NAND, .flags = IORESOURCE_IRQ, }, - [2] = { - /* DRCMR for Data DMA */ - .start = 97, - .end = 97, - .flags = IORESOURCE_DMA, - }, - [3] = { - /* DRCMR for Command DMA */ - .start = 99, - .end = 99, - .flags = IORESOURCE_DMA, - }, }; static u64 pxa3xx_nand_dma_mask = DMA_BIT_MASK(32); @@ -1066,18 +942,6 @@ static struct resource pxa3xx_resource_ssp4[] = { .end = IRQ_SSP4, .flags = IORESOURCE_IRQ, }, - [2] = { - /* DRCMR for RX */ - .start = 2, - .end = 2, - .flags = IORESOURCE_DMA, - }, - [3] = { - /* DRCMR for TX */ - .start = 3, - .end = 3, - .flags = IORESOURCE_DMA, - }, }; /* -- cgit v1.2.3 From cd31b80736852d34bc1072f3e579a6fd73a244e7 Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Sun, 17 Jun 2018 19:02:17 +0200 Subject: ARM: pxa: change SSP DMA channels allocation Now the dma_slave_map is available for PXA architecture, switch the SSP device to it. This specifically means that : - for platform data based machines, the DMA requestor channels are extracted from the slave map, where pxa-ssp-dai. is a 1-1 match to ssp., and the channels are either "rx" or "tx". - for device tree platforms, the dma node should be hooked into the pxa2xx-ac97 or pxa-ssp-dai node. Signed-off-by: Robert Jarzmik Acked-by: Daniel Mack --- arch/arm/plat-pxa/ssp.c | 47 ---------------------------------------------- include/linux/pxa2xx_ssp.h | 2 -- sound/soc/pxa/pxa-ssp.c | 5 ++--- 3 files changed, 2 insertions(+), 52 deletions(-) diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c index ba13f793fbce..ed36dcab80f1 100644 --- a/arch/arm/plat-pxa/ssp.c +++ b/arch/arm/plat-pxa/ssp.c @@ -127,53 +127,6 @@ static int pxa_ssp_probe(struct platform_device *pdev) if (IS_ERR(ssp->clk)) return PTR_ERR(ssp->clk); - if (dev->of_node) { - struct of_phandle_args dma_spec; - struct device_node *np = dev->of_node; - int ret; - - /* - * FIXME: we should allocate the DMA channel from this - * context and pass the channel down to the ssp users. - * For now, we lookup the rx and tx indices manually - */ - - /* rx */ - ret = of_parse_phandle_with_args(np, "dmas", "#dma-cells", - 0, &dma_spec); - - if (ret) { - dev_err(dev, "Can't parse dmas property\n"); - return -ENODEV; - } - ssp->drcmr_rx = dma_spec.args[0]; - of_node_put(dma_spec.np); - - /* tx */ - ret = of_parse_phandle_with_args(np, "dmas", "#dma-cells", - 1, &dma_spec); - if (ret) { - dev_err(dev, "Can't parse dmas property\n"); - return -ENODEV; - } - ssp->drcmr_tx = dma_spec.args[0]; - of_node_put(dma_spec.np); - } else { - res = platform_get_resource(pdev, IORESOURCE_DMA, 0); - if (res == NULL) { - dev_err(dev, "no SSP RX DRCMR defined\n"); - return -ENODEV; - } - ssp->drcmr_rx = res->start; - - res = platform_get_resource(pdev, IORESOURCE_DMA, 1); - if (res == NULL) { - dev_err(dev, "no SSP TX DRCMR defined\n"); - return -ENODEV; - } - ssp->drcmr_tx = res->start; - } - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (res == NULL) { dev_err(dev, "no memory resource defined\n"); diff --git a/include/linux/pxa2xx_ssp.h b/include/linux/pxa2xx_ssp.h index 8461b18e4608..03a7ca46735b 100644 --- a/include/linux/pxa2xx_ssp.h +++ b/include/linux/pxa2xx_ssp.h @@ -212,8 +212,6 @@ struct ssp_device { int type; int use_count; int irq; - int drcmr_rx; - int drcmr_tx; struct device_node *of_node; }; diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c index 6fc986080130..0b441338bdd4 100644 --- a/sound/soc/pxa/pxa-ssp.c +++ b/sound/soc/pxa/pxa-ssp.c @@ -105,9 +105,8 @@ static int pxa_ssp_startup(struct snd_pcm_substream *substream, dma = kzalloc(sizeof(struct snd_dmaengine_dai_dma_data), GFP_KERNEL); if (!dma) return -ENOMEM; - - dma->filter_data = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? - &ssp->drcmr_tx : &ssp->drcmr_rx; + dma->chan_name = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? + "tx" : "rx"; snd_soc_dai_set_dma_data(cpu_dai, substream, dma); -- cgit v1.2.3 From 97d1e3dc8d98f97b65350f8ab221e6d061705abc Mon Sep 17 00:00:00 2001 From: Luc Van Oostenryck Date: Mon, 28 May 2018 18:29:02 +0200 Subject: nds32: define __NDS32_E[BL]__ for sparse nds32 depends on the macros '__NDS32_E[BL]__' to correctly select or define endian-specific macros, structures or pieces of code. These macros are predefined by the compiler but sparse knows nothing about them and thus may pre-process files differently from what GCC would. Fix this by adding '-D__NDS32_E[BL]__' to CHECKFLAGS. Signed-off-by: Luc Van Oostenryck Acked-by: Greentime Hu Signed-off-by: Greentime Hu --- arch/nds32/Makefile | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/nds32/Makefile b/arch/nds32/Makefile index 513bb2e9baf9..031c676821ff 100644 --- a/arch/nds32/Makefile +++ b/arch/nds32/Makefile @@ -34,10 +34,12 @@ ifdef CONFIG_CPU_LITTLE_ENDIAN KBUILD_CFLAGS += $(call cc-option, -EL) KBUILD_AFLAGS += $(call cc-option, -EL) LDFLAGS += $(call cc-option, -EL) +CHECKFLAGS += -D__NDS32_EL__ else KBUILD_CFLAGS += $(call cc-option, -EB) KBUILD_AFLAGS += $(call cc-option, -EB) LDFLAGS += $(call cc-option, -EB) +CHECKFLAGS += -D__NDS32_EB__ endif boot := arch/nds32/boot -- cgit v1.2.3 From a78945c357f58665d6a5da8a69e085898e831c70 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 14 Jun 2018 15:28:52 +0100 Subject: nds32: Fix build error caused by configuration flag rename Fix build error on nds32 due to the merge of commit e3d5980568f ("lib: Rename compiler intrinsic selects to GENERIC_LIB_*") during the 4.18 merge window which renames Kconfig symbols. This had raced with commit aeaa7af744fa ("nds32: lib: To use generic lib instead of libgcc to prevent the symbol undefined issue.") merged late in the 4.17 cycle, which added selects to nds32 using the original Kconfig symbol names. When they came together in merge commit 763f96944c95 ("Merge tag 'mips_4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux") this resulted in the following build errors: nds32le-linux-ld: kernel/time/timekeeping.o: in function `timekeeping_init': timekeeping.c:(.init.text+0x140): undefined reference to `__ashldi3' nds32le-linux-ld: timekeeping.c:(.init.text+0x144): undefined reference to `__ashldi3' nds32le-linux-ld: timekeeping.c:(.init.text+0x17e): undefined reference to `__lshrdi3' nds32le-linux-ld: timekeeping.c:(.init.text+0x182): undefined reference to `__lshrdi3' nds32le-linux-ld: drivers/clocksource/mmio.o: in function `clocksource_mmio_init': mmio.c:(.init.text+0x54): undefined reference to `__lshrdi3' nds32le-linux-ld: mmio.c:(.init.text+0x58): undefined reference to `__lshrdi3' Rename all 6 selects in nds32 and adjust the ordering accordingly to be alphabetical. Fixes: 763f96944c95 ("Merge tag 'mips_4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux") Signed-off-by: Guenter Roeck [jhogan@kernel.org: Rename all 6 symbols, sort, update commit message] Signed-off-by: James Hogan Cc: Greentime Hu Cc: Vincent Chen Cc: Matt Redfearn Cc: Palmer Dabbelt Acked-by: Greentime Hu Signed-off-by: Greentime Hu --- arch/nds32/Kconfig | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/nds32/Kconfig b/arch/nds32/Kconfig index 6aed974276d8..34f7222c5efe 100644 --- a/arch/nds32/Kconfig +++ b/arch/nds32/Kconfig @@ -12,17 +12,17 @@ config NDS32 select CLONE_BACKWARDS select COMMON_CLK select DMA_NONCOHERENT_OPS - select GENERIC_ASHLDI3 - select GENERIC_ASHRDI3 - select GENERIC_LSHRDI3 - select GENERIC_CMPDI2 - select GENERIC_MULDI3 - select GENERIC_UCMPDI2 select GENERIC_ATOMIC64 select GENERIC_CPU_DEVICES select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP select GENERIC_IRQ_SHOW + select GENERIC_LIB_ASHLDI3 + select GENERIC_LIB_ASHRDI3 + select GENERIC_LIB_CMPDI2 + select GENERIC_LIB_LSHRDI3 + select GENERIC_LIB_MULDI3 + select GENERIC_LIB_UCMPDI2 select GENERIC_STRNCPY_FROM_USER select GENERIC_STRNLEN_USER select GENERIC_TIME_VSYSCALL -- cgit v1.2.3 From 45c180bc29babbedd6b8c01b975780ef44d9d09c Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 18 Jun 2018 21:35:07 -0700 Subject: xfrm_user: prevent leaking 2 bytes of kernel memory struct xfrm_userpolicy_type has two holes, so we should not use C99 style initializer. KMSAN report: BUG: KMSAN: kernel-infoleak in copyout lib/iov_iter.c:140 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x1b14/0x2800 lib/iov_iter.c:571 CPU: 1 PID: 4520 Comm: syz-executor841 Not tainted 4.17.0+ #5 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:113 kmsan_report+0x188/0x2a0 mm/kmsan/kmsan.c:1117 kmsan_internal_check_memory+0x138/0x1f0 mm/kmsan/kmsan.c:1211 kmsan_copy_to_user+0x7a/0x160 mm/kmsan/kmsan.c:1253 copyout lib/iov_iter.c:140 [inline] _copy_to_iter+0x1b14/0x2800 lib/iov_iter.c:571 copy_to_iter include/linux/uio.h:106 [inline] skb_copy_datagram_iter+0x422/0xfa0 net/core/datagram.c:431 skb_copy_datagram_msg include/linux/skbuff.h:3268 [inline] netlink_recvmsg+0x6f1/0x1900 net/netlink/af_netlink.c:1959 sock_recvmsg_nosec net/socket.c:802 [inline] sock_recvmsg+0x1d6/0x230 net/socket.c:809 ___sys_recvmsg+0x3fe/0x810 net/socket.c:2279 __sys_recvmmsg+0x58e/0xe30 net/socket.c:2391 do_sys_recvmmsg+0x2a6/0x3e0 net/socket.c:2472 __do_sys_recvmmsg net/socket.c:2485 [inline] __se_sys_recvmmsg net/socket.c:2481 [inline] __x64_sys_recvmmsg+0x15d/0x1c0 net/socket.c:2481 do_syscall_64+0x15b/0x230 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x446ce9 RSP: 002b:00007fc307918db8 EFLAGS: 00000293 ORIG_RAX: 000000000000012b RAX: ffffffffffffffda RBX: 00000000006dbc24 RCX: 0000000000446ce9 RDX: 000000000000000a RSI: 0000000020005040 RDI: 0000000000000003 RBP: 00000000006dbc20 R08: 0000000020004e40 R09: 0000000000000000 R10: 0000000040000000 R11: 0000000000000293 R12: 0000000000000000 R13: 00007ffc8d2df32f R14: 00007fc3079199c0 R15: 0000000000000001 Uninit was stored to memory at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:279 [inline] kmsan_save_stack mm/kmsan/kmsan.c:294 [inline] kmsan_internal_chain_origin+0x12b/0x210 mm/kmsan/kmsan.c:685 kmsan_memcpy_origins+0x11d/0x170 mm/kmsan/kmsan.c:527 __msan_memcpy+0x109/0x160 mm/kmsan/kmsan_instr.c:413 __nla_put lib/nlattr.c:569 [inline] nla_put+0x276/0x340 lib/nlattr.c:627 copy_to_user_policy_type net/xfrm/xfrm_user.c:1678 [inline] dump_one_policy+0xbe1/0x1090 net/xfrm/xfrm_user.c:1708 xfrm_policy_walk+0x45a/0xd00 net/xfrm/xfrm_policy.c:1013 xfrm_dump_policy+0x1c0/0x2a0 net/xfrm/xfrm_user.c:1749 netlink_dump+0x9b5/0x1550 net/netlink/af_netlink.c:2226 __netlink_dump_start+0x1131/0x1270 net/netlink/af_netlink.c:2323 netlink_dump_start include/linux/netlink.h:214 [inline] xfrm_user_rcv_msg+0x8a3/0x9b0 net/xfrm/xfrm_user.c:2577 netlink_rcv_skb+0x37e/0x600 net/netlink/af_netlink.c:2448 xfrm_netlink_rcv+0xb2/0xf0 net/xfrm/xfrm_user.c:2598 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline] netlink_unicast+0x1680/0x1750 net/netlink/af_netlink.c:1336 netlink_sendmsg+0x104f/0x1350 net/netlink/af_netlink.c:1901 sock_sendmsg_nosec net/socket.c:629 [inline] sock_sendmsg net/socket.c:639 [inline] ___sys_sendmsg+0xec8/0x1320 net/socket.c:2117 __sys_sendmsg net/socket.c:2155 [inline] __do_sys_sendmsg net/socket.c:2164 [inline] __se_sys_sendmsg net/socket.c:2162 [inline] __x64_sys_sendmsg+0x331/0x460 net/socket.c:2162 do_syscall_64+0x15b/0x230 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Local variable description: ----upt.i@dump_one_policy Variable was created at: dump_one_policy+0x78/0x1090 net/xfrm/xfrm_user.c:1689 xfrm_policy_walk+0x45a/0xd00 net/xfrm/xfrm_policy.c:1013 Byte 130 of 137 is uninitialized Memory access starts at ffff88019550407f Fixes: c0144beaeca42 ("[XFRM] netlink: Use nla_put()/NLA_PUT() variantes") Signed-off-by: Eric Dumazet Reported-by: syzbot Cc: Steffen Klassert Cc: Herbert Xu Signed-off-by: Steffen Klassert --- net/xfrm/xfrm_user.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c index 080035f056d9..1e50b70ad668 100644 --- a/net/xfrm/xfrm_user.c +++ b/net/xfrm/xfrm_user.c @@ -1671,9 +1671,11 @@ static inline unsigned int userpolicy_type_attrsize(void) #ifdef CONFIG_XFRM_SUB_POLICY static int copy_to_user_policy_type(u8 type, struct sk_buff *skb) { - struct xfrm_userpolicy_type upt = { - .type = type, - }; + struct xfrm_userpolicy_type upt; + + /* Sadly there are two holes in struct xfrm_userpolicy_type */ + memset(&upt, 0, sizeof(upt)); + upt.type = type; return nla_put(skb, XFRMA_POLICY_TYPE, sizeof(upt), &upt); } -- cgit v1.2.3 From 5fd46e649ee63259f2197625662477ac67a69e79 Mon Sep 17 00:00:00 2001 From: Mac Chiang Date: Tue, 19 Jun 2018 14:16:06 +0800 Subject: ASoC: Intel: kbl_da7219_max98357a: add fe_ops for kbl Audio Capture Port platform support fixed constraint hw_prams as Stereo, 48KHz, 16 bits. This fixed the headset mic recorded noise due to mono capturing request from some apps. e.g. online Voice Recorder Signed-off-by: Louis Collard Signed-off-by: Mac Chiang Acked-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- sound/soc/intel/boards/kbl_da7219_max98357a.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/intel/boards/kbl_da7219_max98357a.c b/sound/soc/intel/boards/kbl_da7219_max98357a.c index 94294c27d1db..7961f1fd18bd 100644 --- a/sound/soc/intel/boards/kbl_da7219_max98357a.c +++ b/sound/soc/intel/boards/kbl_da7219_max98357a.c @@ -380,6 +380,7 @@ static struct snd_soc_dai_link kabylake_dais[] = { .trigger = { SND_SOC_DPCM_TRIGGER_POST, SND_SOC_DPCM_TRIGGER_POST}, .dpcm_capture = 1, + .ops = &kabylake_da7219_fe_ops, }, [KBL_DPCM_AUDIO_DMIC_CP] = { .name = "Kbl Audio DMIC cap", -- cgit v1.2.3 From 95555f580dca21fac5ea35c10fa92fa034bd403f Mon Sep 17 00:00:00 2001 From: Naveen Manohar Date: Mon, 18 Jun 2018 13:29:35 -0500 Subject: ASoC: Intel: broxton: reduce machine name for bxt_da7219_max98357a Use truncated names in bxt id table and bxt_da7219_max98357a machine as platform device id table expects names to be less then 20chars. Signed-off-by: Naveen Manohar Signed-off-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- sound/soc/intel/boards/bxt_da7219_max98357a.c | 4 ++-- sound/soc/intel/skylake/skl.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/intel/boards/bxt_da7219_max98357a.c b/sound/soc/intel/boards/bxt_da7219_max98357a.c index 40eb979d5ac1..3aba5bcf806a 100644 --- a/sound/soc/intel/boards/bxt_da7219_max98357a.c +++ b/sound/soc/intel/boards/bxt_da7219_max98357a.c @@ -586,7 +586,7 @@ static int broxton_audio_probe(struct platform_device *pdev) static struct platform_driver broxton_audio = { .probe = broxton_audio_probe, .driver = { - .name = "bxt_da7219_max98357a_i2s", + .name = "bxt_da7219_max98357a", .pm = &snd_soc_pm_ops, }, }; @@ -599,4 +599,4 @@ MODULE_AUTHOR("Rohit Ainapure "); MODULE_AUTHOR("Harsha Priya "); MODULE_AUTHOR("Conrad Cooke "); MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:bxt_da7219_max98357a_i2s"); +MODULE_ALIAS("platform:bxt_da7219_max98357a"); diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c index f0d9793f872a..0a8f0768e987 100644 --- a/sound/soc/intel/skylake/skl.c +++ b/sound/soc/intel/skylake/skl.c @@ -1093,7 +1093,7 @@ static struct snd_soc_acpi_mach sst_bxtp_devdata[] = { }, { .id = "DLGS7219", - .drv_name = "bxt_da7219_max98357a_i2s", + .drv_name = "bxt_da7219_max98357a", .fw_filename = "intel/dsp_fw_bxtn.bin", .machine_quirk = snd_soc_acpi_codec_list, .quirk_data = &bxt_codecs, -- cgit v1.2.3 From 5f15f267daf81a4c7c2a1cd2a0d6743ec7fc8b59 Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Mon, 18 Jun 2018 13:29:36 -0500 Subject: ASoC: Intel: Skylake: cleanup before moving ACPI tables There is no need to deal with DMICs if the DSP is not present and there is no ACPI machine ID found. Simplify before moving these ACPI tables to sound/soc/intel/common Signed-off-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c index 0a8f0768e987..6dec748e8949 100644 --- a/sound/soc/intel/skylake/skl.c +++ b/sound/soc/intel/skylake/skl.c @@ -500,10 +500,12 @@ static int skl_find_machine(struct skl *skl, void *driver_data) skl->mach = mach; skl->fw_name = mach->fw_filename; - pdata = skl->mach->pdata; + pdata = mach->pdata; - if (mach->pdata) + if (pdata) { skl->use_tplg_pcm = pdata->use_tplg_pcm; + pdata->dmic_num = skl_get_dmic_geo(skl); + } return 0; } @@ -930,8 +932,6 @@ static int skl_probe(struct pci_dev *pci, pci_set_drvdata(skl->pci, ebus); - skl_dmic_data.dmic_num = skl_get_dmic_geo(skl); - /* check if dsp is there */ if (bus->ppcap) { /* create device for dsp clk */ -- cgit v1.2.3 From cbaa7f0bdbee1969bb311c641abbd0d2af6ba861 Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Mon, 18 Jun 2018 13:29:37 -0500 Subject: ASoC: Intel: move SKL+ codec ACPI tables to common directory No functionality change, just move to common tables to make it easier to deal with SOF and share the same machine drivers - as done previously for BYT/CHT/HSW/BDW. Signed-off-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- include/sound/soc-acpi-intel-match.h | 5 + sound/soc/intel/common/Makefile | 6 +- sound/soc/intel/common/soc-acpi-intel-bxt-match.c | 35 +++++ sound/soc/intel/common/soc-acpi-intel-cnl-match.c | 29 ++++ sound/soc/intel/common/soc-acpi-intel-glk-match.c | 23 +++ sound/soc/intel/common/soc-acpi-intel-kbl-match.c | 91 ++++++++++++ sound/soc/intel/common/soc-acpi-intel-skl-match.c | 47 +++++++ sound/soc/intel/skylake/skl.c | 162 +--------------------- 8 files changed, 241 insertions(+), 157 deletions(-) create mode 100644 sound/soc/intel/common/soc-acpi-intel-bxt-match.c create mode 100644 sound/soc/intel/common/soc-acpi-intel-cnl-match.c create mode 100644 sound/soc/intel/common/soc-acpi-intel-glk-match.c create mode 100644 sound/soc/intel/common/soc-acpi-intel-kbl-match.c create mode 100644 sound/soc/intel/common/soc-acpi-intel-skl-match.c diff --git a/include/sound/soc-acpi-intel-match.h b/include/sound/soc-acpi-intel-match.h index 9da6388c20a1..917ddd0f2762 100644 --- a/include/sound/soc-acpi-intel-match.h +++ b/include/sound/soc-acpi-intel-match.h @@ -29,5 +29,10 @@ extern struct snd_soc_acpi_mach snd_soc_acpi_intel_broadwell_machines[]; extern struct snd_soc_acpi_mach snd_soc_acpi_intel_baytrail_legacy_machines[]; extern struct snd_soc_acpi_mach snd_soc_acpi_intel_baytrail_machines[]; extern struct snd_soc_acpi_mach snd_soc_acpi_intel_cherrytrail_machines[]; +extern struct snd_soc_acpi_mach snd_soc_acpi_intel_skl_machines[]; +extern struct snd_soc_acpi_mach snd_soc_acpi_intel_kbl_machines[]; +extern struct snd_soc_acpi_mach snd_soc_acpi_intel_bxt_machines[]; +extern struct snd_soc_acpi_mach snd_soc_acpi_intel_glk_machines[]; +extern struct snd_soc_acpi_mach snd_soc_acpi_intel_cnl_machines[]; #endif diff --git a/sound/soc/intel/common/Makefile b/sound/soc/intel/common/Makefile index 7379d8830c39..915a34cdc8ac 100644 --- a/sound/soc/intel/common/Makefile +++ b/sound/soc/intel/common/Makefile @@ -3,7 +3,11 @@ snd-soc-sst-dsp-objs := sst-dsp.o snd-soc-sst-acpi-objs := sst-acpi.o snd-soc-sst-ipc-objs := sst-ipc.o snd-soc-sst-firmware-objs := sst-firmware.o -snd-soc-acpi-intel-match-objs := soc-acpi-intel-byt-match.o soc-acpi-intel-cht-match.o soc-acpi-intel-hsw-bdw-match.o +snd-soc-acpi-intel-match-objs := soc-acpi-intel-byt-match.o soc-acpi-intel-cht-match.o \ + soc-acpi-intel-hsw-bdw-match.o \ + soc-acpi-intel-skl-match.o soc-acpi-intel-kbl-match.o \ + soc-acpi-intel-bxt-match.o soc-acpi-intel-glk-match.o \ + soc-acpi-intel-cnl-match.o obj-$(CONFIG_SND_SOC_INTEL_SST) += snd-soc-sst-dsp.o snd-soc-sst-ipc.o obj-$(CONFIG_SND_SOC_INTEL_SST_ACPI) += snd-soc-sst-acpi.o diff --git a/sound/soc/intel/common/soc-acpi-intel-bxt-match.c b/sound/soc/intel/common/soc-acpi-intel-bxt-match.c new file mode 100644 index 000000000000..569f1de97e82 --- /dev/null +++ b/sound/soc/intel/common/soc-acpi-intel-bxt-match.c @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * soc-apci-intel-bxt-match.c - tables and support for BXT ACPI enumeration. + * + * Copyright (c) 2018, Intel Corporation. + * + */ + +#include +#include + +static struct snd_soc_acpi_codecs bxt_codecs = { + .num_codecs = 1, + .codecs = {"MX98357A"} +}; + +struct snd_soc_acpi_mach snd_soc_acpi_intel_bxt_machines[] = { + { + .id = "INT343A", + .drv_name = "bxt_alc298s_i2s", + .fw_filename = "intel/dsp_fw_bxtn.bin", + }, + { + .id = "DLGS7219", + .drv_name = "bxt_da7219_max98357a", + .fw_filename = "intel/dsp_fw_bxtn.bin", + .machine_quirk = snd_soc_acpi_codec_list, + .quirk_data = &bxt_codecs, + }, + {}, +}; +EXPORT_SYMBOL_GPL(snd_soc_acpi_intel_bxt_machines); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Intel Common ACPI Match module"); diff --git a/sound/soc/intel/common/soc-acpi-intel-cnl-match.c b/sound/soc/intel/common/soc-acpi-intel-cnl-match.c new file mode 100644 index 000000000000..b83ee053d417 --- /dev/null +++ b/sound/soc/intel/common/soc-acpi-intel-cnl-match.c @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * soc-apci-intel-cnl-match.c - tables and support for CNL ACPI enumeration. + * + * Copyright (c) 2018, Intel Corporation. + * + */ + +#include +#include +#include "../skylake/skl.h" + +static struct skl_machine_pdata cnl_pdata = { + .use_tplg_pcm = true, +}; + +struct snd_soc_acpi_mach snd_soc_acpi_intel_cnl_machines[] = { + { + .id = "INT34C2", + .drv_name = "cnl_rt274", + .fw_filename = "intel/dsp_fw_cnl.bin", + .pdata = &cnl_pdata, + }, + {}, +}; +EXPORT_SYMBOL_GPL(snd_soc_acpi_intel_cnl_machines); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Intel Common ACPI Match module"); diff --git a/sound/soc/intel/common/soc-acpi-intel-glk-match.c b/sound/soc/intel/common/soc-acpi-intel-glk-match.c new file mode 100644 index 000000000000..dee09439e7cb --- /dev/null +++ b/sound/soc/intel/common/soc-acpi-intel-glk-match.c @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * soc-apci-intel-glk-match.c - tables and support for GLK ACPI enumeration. + * + * Copyright (c) 2018, Intel Corporation. + * + */ + +#include +#include + +struct snd_soc_acpi_mach snd_soc_acpi_intel_glk_machines[] = { + { + .id = "INT343A", + .drv_name = "glk_alc298s_i2s", + .fw_filename = "intel/dsp_fw_glk.bin", + }, + {}, +}; +EXPORT_SYMBOL_GPL(snd_soc_acpi_intel_glk_machines); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Intel Common ACPI Match module"); diff --git a/sound/soc/intel/common/soc-acpi-intel-kbl-match.c b/sound/soc/intel/common/soc-acpi-intel-kbl-match.c new file mode 100644 index 000000000000..0ee173ca437d --- /dev/null +++ b/sound/soc/intel/common/soc-acpi-intel-kbl-match.c @@ -0,0 +1,91 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * soc-apci-intel-kbl-match.c - tables and support for KBL ACPI enumeration. + * + * Copyright (c) 2018, Intel Corporation. + * + */ + +#include +#include +#include "../skylake/skl.h" + +static struct skl_machine_pdata skl_dmic_data; + +static struct snd_soc_acpi_codecs kbl_codecs = { + .num_codecs = 1, + .codecs = {"10508825"} +}; + +static struct snd_soc_acpi_codecs kbl_poppy_codecs = { + .num_codecs = 1, + .codecs = {"10EC5663"} +}; + +static struct snd_soc_acpi_codecs kbl_5663_5514_codecs = { + .num_codecs = 2, + .codecs = {"10EC5663", "10EC5514"} +}; + +static struct snd_soc_acpi_codecs kbl_7219_98357_codecs = { + .num_codecs = 1, + .codecs = {"MX98357A"} +}; + +struct snd_soc_acpi_mach snd_soc_acpi_intel_kbl_machines[] = { + { + .id = "INT343A", + .drv_name = "kbl_alc286s_i2s", + .fw_filename = "intel/dsp_fw_kbl.bin", + }, + { + .id = "INT343B", + .drv_name = "kbl_n88l25_s4567", + .fw_filename = "intel/dsp_fw_kbl.bin", + .machine_quirk = snd_soc_acpi_codec_list, + .quirk_data = &kbl_codecs, + .pdata = &skl_dmic_data, + }, + { + .id = "MX98357A", + .drv_name = "kbl_n88l25_m98357a", + .fw_filename = "intel/dsp_fw_kbl.bin", + .machine_quirk = snd_soc_acpi_codec_list, + .quirk_data = &kbl_codecs, + .pdata = &skl_dmic_data, + }, + { + .id = "MX98927", + .drv_name = "kbl_r5514_5663_max", + .fw_filename = "intel/dsp_fw_kbl.bin", + .machine_quirk = snd_soc_acpi_codec_list, + .quirk_data = &kbl_5663_5514_codecs, + .pdata = &skl_dmic_data, + }, + { + .id = "MX98927", + .drv_name = "kbl_rt5663_m98927", + .fw_filename = "intel/dsp_fw_kbl.bin", + .machine_quirk = snd_soc_acpi_codec_list, + .quirk_data = &kbl_poppy_codecs, + .pdata = &skl_dmic_data, + }, + { + .id = "10EC5663", + .drv_name = "kbl_rt5663", + .fw_filename = "intel/dsp_fw_kbl.bin", + }, + { + .id = "DLGS7219", + .drv_name = "kbl_da7219_max98357a", + .fw_filename = "intel/dsp_fw_kbl.bin", + .machine_quirk = snd_soc_acpi_codec_list, + .quirk_data = &kbl_7219_98357_codecs, + .pdata = &skl_dmic_data, + }, + {}, +}; +EXPORT_SYMBOL_GPL(snd_soc_acpi_intel_kbl_machines); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Intel Common ACPI Match module"); diff --git a/sound/soc/intel/common/soc-acpi-intel-skl-match.c b/sound/soc/intel/common/soc-acpi-intel-skl-match.c new file mode 100644 index 000000000000..0c9c0edd35b3 --- /dev/null +++ b/sound/soc/intel/common/soc-acpi-intel-skl-match.c @@ -0,0 +1,47 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * soc-apci-intel-skl-match.c - tables and support for SKL ACPI enumeration. + * + * Copyright (c) 2018, Intel Corporation. + * + */ + +#include +#include +#include "../skylake/skl.h" + +static struct skl_machine_pdata skl_dmic_data; + +static struct snd_soc_acpi_codecs skl_codecs = { + .num_codecs = 1, + .codecs = {"10508825"} +}; + +struct snd_soc_acpi_mach snd_soc_acpi_intel_skl_machines[] = { + { + .id = "INT343A", + .drv_name = "skl_alc286s_i2s", + .fw_filename = "intel/dsp_fw_release.bin", + }, + { + .id = "INT343B", + .drv_name = "skl_n88l25_s4567", + .fw_filename = "intel/dsp_fw_release.bin", + .machine_quirk = snd_soc_acpi_codec_list, + .quirk_data = &skl_codecs, + .pdata = &skl_dmic_data, + }, + { + .id = "MX98357A", + .drv_name = "skl_n88l25_m98357a", + .fw_filename = "intel/dsp_fw_release.bin", + .machine_quirk = snd_soc_acpi_codec_list, + .quirk_data = &skl_codecs, + .pdata = &skl_dmic_data, + }, + {}, +}; +EXPORT_SYMBOL_GPL(snd_soc_acpi_intel_skl_machines); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Intel Common ACPI Match module"); diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c index 6dec748e8949..670ff9aaca55 100644 --- a/sound/soc/intel/skylake/skl.c +++ b/sound/soc/intel/skylake/skl.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include #include @@ -36,8 +37,6 @@ #include "skl-sst-dsp.h" #include "skl-sst-ipc.h" -static struct skl_machine_pdata skl_dmic_data; - /* * initialize the PCI registers */ @@ -1026,172 +1025,23 @@ static void skl_remove(struct pci_dev *pci) dev_set_drvdata(&pci->dev, NULL); } -static struct snd_soc_acpi_codecs skl_codecs = { - .num_codecs = 1, - .codecs = {"10508825"} -}; - -static struct snd_soc_acpi_codecs kbl_codecs = { - .num_codecs = 1, - .codecs = {"10508825"} -}; - -static struct snd_soc_acpi_codecs bxt_codecs = { - .num_codecs = 1, - .codecs = {"MX98357A"} -}; - -static struct snd_soc_acpi_codecs kbl_poppy_codecs = { - .num_codecs = 1, - .codecs = {"10EC5663"} -}; - -static struct snd_soc_acpi_codecs kbl_5663_5514_codecs = { - .num_codecs = 2, - .codecs = {"10EC5663", "10EC5514"} -}; - -static struct snd_soc_acpi_codecs kbl_7219_98357_codecs = { - .num_codecs = 1, - .codecs = {"MX98357A"} -}; - -static struct skl_machine_pdata cnl_pdata = { - .use_tplg_pcm = true, -}; - -static struct snd_soc_acpi_mach sst_skl_devdata[] = { - { - .id = "INT343A", - .drv_name = "skl_alc286s_i2s", - .fw_filename = "intel/dsp_fw_release.bin", - }, - { - .id = "INT343B", - .drv_name = "skl_n88l25_s4567", - .fw_filename = "intel/dsp_fw_release.bin", - .machine_quirk = snd_soc_acpi_codec_list, - .quirk_data = &skl_codecs, - .pdata = &skl_dmic_data - }, - { - .id = "MX98357A", - .drv_name = "skl_n88l25_m98357a", - .fw_filename = "intel/dsp_fw_release.bin", - .machine_quirk = snd_soc_acpi_codec_list, - .quirk_data = &skl_codecs, - .pdata = &skl_dmic_data - }, - {} -}; - -static struct snd_soc_acpi_mach sst_bxtp_devdata[] = { - { - .id = "INT343A", - .drv_name = "bxt_alc298s_i2s", - .fw_filename = "intel/dsp_fw_bxtn.bin", - }, - { - .id = "DLGS7219", - .drv_name = "bxt_da7219_max98357a", - .fw_filename = "intel/dsp_fw_bxtn.bin", - .machine_quirk = snd_soc_acpi_codec_list, - .quirk_data = &bxt_codecs, - }, - {} -}; - -static struct snd_soc_acpi_mach sst_kbl_devdata[] = { - { - .id = "INT343A", - .drv_name = "kbl_alc286s_i2s", - .fw_filename = "intel/dsp_fw_kbl.bin", - }, - { - .id = "INT343B", - .drv_name = "kbl_n88l25_s4567", - .fw_filename = "intel/dsp_fw_kbl.bin", - .machine_quirk = snd_soc_acpi_codec_list, - .quirk_data = &kbl_codecs, - .pdata = &skl_dmic_data - }, - { - .id = "MX98357A", - .drv_name = "kbl_n88l25_m98357a", - .fw_filename = "intel/dsp_fw_kbl.bin", - .machine_quirk = snd_soc_acpi_codec_list, - .quirk_data = &kbl_codecs, - .pdata = &skl_dmic_data - }, - { - .id = "MX98927", - .drv_name = "kbl_r5514_5663_max", - .fw_filename = "intel/dsp_fw_kbl.bin", - .machine_quirk = snd_soc_acpi_codec_list, - .quirk_data = &kbl_5663_5514_codecs, - .pdata = &skl_dmic_data - }, - { - .id = "MX98927", - .drv_name = "kbl_rt5663_m98927", - .fw_filename = "intel/dsp_fw_kbl.bin", - .machine_quirk = snd_soc_acpi_codec_list, - .quirk_data = &kbl_poppy_codecs, - .pdata = &skl_dmic_data - }, - { - .id = "10EC5663", - .drv_name = "kbl_rt5663", - .fw_filename = "intel/dsp_fw_kbl.bin", - }, - { - .id = "DLGS7219", - .drv_name = "kbl_da7219_max98357a", - .fw_filename = "intel/dsp_fw_kbl.bin", - .machine_quirk = snd_soc_acpi_codec_list, - .quirk_data = &kbl_7219_98357_codecs, - .pdata = &skl_dmic_data - }, - - {} -}; - -static struct snd_soc_acpi_mach sst_glk_devdata[] = { - { - .id = "INT343A", - .drv_name = "glk_alc298s_i2s", - .fw_filename = "intel/dsp_fw_glk.bin", - }, - {} -}; - -static const struct snd_soc_acpi_mach sst_cnl_devdata[] = { - { - .id = "INT34C2", - .drv_name = "cnl_rt274", - .fw_filename = "intel/dsp_fw_cnl.bin", - .pdata = &cnl_pdata, - }, - {} -}; - /* PCI IDs */ static const struct pci_device_id skl_ids[] = { /* Sunrise Point-LP */ { PCI_DEVICE(0x8086, 0x9d70), - .driver_data = (unsigned long)&sst_skl_devdata}, + .driver_data = (unsigned long)&snd_soc_acpi_intel_skl_machines}, /* BXT-P */ { PCI_DEVICE(0x8086, 0x5a98), - .driver_data = (unsigned long)&sst_bxtp_devdata}, + .driver_data = (unsigned long)&snd_soc_acpi_intel_bxt_machines}, /* KBL */ { PCI_DEVICE(0x8086, 0x9D71), - .driver_data = (unsigned long)&sst_kbl_devdata}, + .driver_data = (unsigned long)&snd_soc_acpi_intel_kbl_machines}, /* GLK */ { PCI_DEVICE(0x8086, 0x3198), - .driver_data = (unsigned long)&sst_glk_devdata}, + .driver_data = (unsigned long)&snd_soc_acpi_intel_glk_machines}, /* CNL */ { PCI_DEVICE(0x8086, 0x9dc8), - .driver_data = (unsigned long)&sst_cnl_devdata}, + .driver_data = (unsigned long)&snd_soc_acpi_intel_cnl_machines}, { 0, } }; MODULE_DEVICE_TABLE(pci, skl_ids); -- cgit v1.2.3 From 65a33883c778befcb85ef45285763fd8ac1b2ba3 Mon Sep 17 00:00:00 2001 From: Naveen Manohar Date: Mon, 18 Jun 2018 13:29:38 -0500 Subject: ASoC: Intel: common: Add Geminilake Dialog+Maxim machine driver entry This patch adds da7219_max98357a machine driver entry into machine table Signed-off-by: Naveen Manohar Signed-off-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- sound/soc/intel/common/soc-acpi-intel-glk-match.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/sound/soc/intel/common/soc-acpi-intel-glk-match.c b/sound/soc/intel/common/soc-acpi-intel-glk-match.c index dee09439e7cb..5902aa1d0ee3 100644 --- a/sound/soc/intel/common/soc-acpi-intel-glk-match.c +++ b/sound/soc/intel/common/soc-acpi-intel-glk-match.c @@ -9,12 +9,24 @@ #include #include +static struct snd_soc_acpi_codecs glk_codecs = { + .num_codecs = 1, + .codecs = {"MX98357A"} +}; + struct snd_soc_acpi_mach snd_soc_acpi_intel_glk_machines[] = { { .id = "INT343A", .drv_name = "glk_alc298s_i2s", .fw_filename = "intel/dsp_fw_glk.bin", }, + { + .id = "DLGS7219", + .drv_name = "glk_da7219_max98357a", + .fw_filename = "intel/dsp_fw_glk.bin", + .machine_quirk = snd_soc_acpi_codec_list, + .quirk_data = &glk_codecs, + }, {}, }; EXPORT_SYMBOL_GPL(snd_soc_acpi_intel_glk_machines); -- cgit v1.2.3 From e6d298fd4a4454dd121343323e3f00a27f8819a4 Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Mon, 18 Jun 2018 13:29:39 -0500 Subject: ASoC: Intel: common: add firmware/topology information for SOF No functionality change for Skylake driver, add relevant names needed by SOF for BXT/APL, GLK and CNL. Signed-off-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- sound/soc/intel/common/soc-acpi-intel-bxt-match.c | 3 +++ sound/soc/intel/common/soc-acpi-intel-cnl-match.c | 3 +++ sound/soc/intel/common/soc-acpi-intel-glk-match.c | 6 ++++++ 3 files changed, 12 insertions(+) diff --git a/sound/soc/intel/common/soc-acpi-intel-bxt-match.c b/sound/soc/intel/common/soc-acpi-intel-bxt-match.c index 569f1de97e82..50869eddbb3b 100644 --- a/sound/soc/intel/common/soc-acpi-intel-bxt-match.c +++ b/sound/soc/intel/common/soc-acpi-intel-bxt-match.c @@ -26,6 +26,9 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_bxt_machines[] = { .fw_filename = "intel/dsp_fw_bxtn.bin", .machine_quirk = snd_soc_acpi_codec_list, .quirk_data = &bxt_codecs, + .sof_fw_filename = "intel/sof-apl.ri", + .sof_tplg_filename = "intel/sof-apl-da7219.tplg", + .asoc_plat_name = "0000:00:0e.0", }, {}, }; diff --git a/sound/soc/intel/common/soc-acpi-intel-cnl-match.c b/sound/soc/intel/common/soc-acpi-intel-cnl-match.c index b83ee053d417..ec8e28e7b937 100644 --- a/sound/soc/intel/common/soc-acpi-intel-cnl-match.c +++ b/sound/soc/intel/common/soc-acpi-intel-cnl-match.c @@ -20,6 +20,9 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_cnl_machines[] = { .drv_name = "cnl_rt274", .fw_filename = "intel/dsp_fw_cnl.bin", .pdata = &cnl_pdata, + .sof_fw_filename = "intel/sof-cnl.ri", + .sof_tplg_filename = "intel/sof-cnl-rt274.tplg", + .asoc_plat_name = "0000:00:1f.3", }, {}, }; diff --git a/sound/soc/intel/common/soc-acpi-intel-glk-match.c b/sound/soc/intel/common/soc-acpi-intel-glk-match.c index 5902aa1d0ee3..305875af71ca 100644 --- a/sound/soc/intel/common/soc-acpi-intel-glk-match.c +++ b/sound/soc/intel/common/soc-acpi-intel-glk-match.c @@ -19,6 +19,9 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_glk_machines[] = { .id = "INT343A", .drv_name = "glk_alc298s_i2s", .fw_filename = "intel/dsp_fw_glk.bin", + .sof_fw_filename = "intel/sof-glk.ri", + .sof_tplg_filename = "intel/sof-glk-alc298.tplg", + .asoc_plat_name = "0000:00:0e.0", }, { .id = "DLGS7219", @@ -26,6 +29,9 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_glk_machines[] = { .fw_filename = "intel/dsp_fw_glk.bin", .machine_quirk = snd_soc_acpi_codec_list, .quirk_data = &glk_codecs, + .sof_fw_filename = "intel/sof-glk.ri", + .sof_tplg_filename = "intel/sof-glk-da7219.tplg", + .asoc_plat_name = "0000:00:0e.0", }, {}, }; -- cgit v1.2.3 From b45350135b9241b64cc91ccc8dddca2ee4dc25d7 Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Mon, 18 Jun 2018 13:29:41 -0500 Subject: ASoC: Intel: common: add entries for SOF-based machine drivers While we are at it, add entries for machine drivers that are used on SOF-based platforms. The drivers will be submitted upstream after the core SOF patches, but there's no harm in adding these references now. Signed-off-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- sound/soc/intel/common/soc-acpi-intel-bxt-match.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/sound/soc/intel/common/soc-acpi-intel-bxt-match.c b/sound/soc/intel/common/soc-acpi-intel-bxt-match.c index 50869eddbb3b..f39386e540d3 100644 --- a/sound/soc/intel/common/soc-acpi-intel-bxt-match.c +++ b/sound/soc/intel/common/soc-acpi-intel-bxt-match.c @@ -30,6 +30,27 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_bxt_machines[] = { .sof_tplg_filename = "intel/sof-apl-da7219.tplg", .asoc_plat_name = "0000:00:0e.0", }, + { + .id = "104C5122", + .drv_name = "bxt-pcm512x", + .sof_fw_filename = "intel/sof-apl.ri", + .sof_tplg_filename = "intel/sof-apl-pcm512x.tplg", + .asoc_plat_name = "0000:00:0e.0", + }, + { + .id = "1AEC8804", + .drv_name = "bxt-wm8804", + .sof_fw_filename = "intel/sof-apl.ri", + .sof_tplg_filename = "intel/sof-apl-wm8804.tplg", + .asoc_plat_name = "0000:00:0e.0", + }, + { + .id = "INT34C3", + .drv_name = "bxt_tdf8532", + .sof_fw_filename = "intel/sof-apl.ri", + .sof_tplg_filename = "intel/sof-apl-tdf8532.tplg", + .asoc_plat_name = "0000:00:0e.0", + }, {}, }; EXPORT_SYMBOL_GPL(snd_soc_acpi_intel_bxt_machines); -- cgit v1.2.3 From f0d9034b290d8bad590e843c2a1081eb47d813ad Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Mon, 18 Jun 2018 13:29:42 -0500 Subject: ASoC: Intel: common: fix copy/paste issue with SOF/broadwell topology file There are two commercially-available Broadwell platforms based on I2S (Dell XPS13 and 'Samus' Pixel 2015 Chromebook). Fix a copy/paste issue to allow each platform to enable different features if needed when SOF is enabled Signed-off-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- sound/soc/intel/common/soc-acpi-intel-hsw-bdw-match.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/intel/common/soc-acpi-intel-hsw-bdw-match.c b/sound/soc/intel/common/soc-acpi-intel-hsw-bdw-match.c index e0e8c8c27528..53e7acdfbb81 100644 --- a/sound/soc/intel/common/soc-acpi-intel-hsw-bdw-match.c +++ b/sound/soc/intel/common/soc-acpi-intel-hsw-bdw-match.c @@ -45,7 +45,7 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_broadwell_machines[] = { .drv_name = "bdw-rt5677", .fw_filename = "intel/IntcSST2.bin", .sof_fw_filename = "intel/reef-bdw.ri", - .sof_tplg_filename = "intel/reef-bdw-rt286.tplg", + .sof_tplg_filename = "intel/reef-bdw-rt5677.tplg", .asoc_plat_name = "haswell-pcm-audio", }, { -- cgit v1.2.3 From c987ac6f1f088663b6dad39281071aeb31d450a8 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Wed, 13 Jun 2018 14:20:21 +0200 Subject: clk: meson-gxbb: set fclk_div2 as CLK_IS_CRITICAL On Amlogic Meson GXBB & GXL platforms, the SCPI Cortex-M4 Co-Processor seems to be dependent on the FCLK_DIV2 to be operationnal. The issue occurred since v4.17-rc1 by freezing the kernel boot when the 'schedutil' cpufreq governor was selected as default : [ 12.071837] scpi_protocol scpi: SCP Protocol 0.0 Firmware 0.0.0 version domain-0 init dvfs: 4 [ 12.087757] hctosys: unable to open rtc device (rtc0) [ 12.087907] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 12.102241] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' But when disabling the MMC driver, the boot finished but cpufreq failed to change the CPU frequency : [ 12.153045] cpufreq: __target_index: Failed to change cpu frequency: -5 A bisect between v4.16 and v4.16-rc1 gave 05f814402d61 ("clk: meson: add fdiv clock gates") to be the first bad commit. This commit added support for the missing clock gates before the fixed PLL fixed dividers (FCLK_DIVx) and the clock framework basically disabled all the unused fixed dividers, thus disabled a critical clock path for the SCPI Co-Processor. This patch simply sets the FCLK_DIV2 gate as critical to ensure nobody can disable it. Fixes: 05f814402d61 ("clk: meson: add fdiv clock gates") Signed-off-by: Neil Armstrong Tested-by: Kevin Hilman [few corrections in the commit description] Signed-off-by: Jerome Brunet --- drivers/clk/meson/gxbb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c index 240658404367..177fffb9ebef 100644 --- a/drivers/clk/meson/gxbb.c +++ b/drivers/clk/meson/gxbb.c @@ -498,6 +498,7 @@ static struct clk_regmap gxbb_fclk_div2 = { .ops = &clk_regmap_gate_ops, .parent_names = (const char *[]){ "fclk_div2_div" }, .num_parents = 1, + .flags = CLK_IS_CRITICAL, }, }; -- cgit v1.2.3 From 244e293690a6e07cbdfa11af1977488d91931eed Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Tue, 19 Jun 2018 16:22:09 +0100 Subject: ASoC: pcm: Tidy up open/hw_params handling Currently, the core will continue processing open/hw_params component callbacks after one has failed even though it will abort immediately afterwards. This is unnecessary and also has the issue that close/hw_free will be called on the component which failed open/hw_params which could result in issues if the driver doesn't expect this behaviour. Update the core to abort processing open/hw_params when an error is hit and only call close/hw_free for those components that were successfully opened. Signed-off-by: Charles Keepax Signed-off-by: Mark Brown --- sound/soc/soc-pcm.c | 116 ++++++++++++++++++++++++++++------------------------ 1 file changed, 62 insertions(+), 54 deletions(-) diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c index 5e7ae47a9658..45b52f7b9690 100644 --- a/sound/soc/soc-pcm.c +++ b/sound/soc/soc-pcm.c @@ -448,6 +448,29 @@ static void soc_pcm_init_runtime_hw(struct snd_pcm_substream *substream) hw->rate_max = min_not_zero(hw->rate_max, rate_max); } +static int soc_pcm_components_close(struct snd_pcm_substream *substream, + struct snd_soc_component *last) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_rtdcom_list *rtdcom; + struct snd_soc_component *component; + + for_each_rtdcom(rtd, rtdcom) { + component = rtdcom->component; + + if (component == last) + break; + + if (!component->driver->ops || + !component->driver->ops->close) + continue; + + component->driver->ops->close(substream); + } + + return 0; +} + /* * Called by ALSA when a PCM substream is opened, the runtime->hw record is * then initialized and any private data can be allocated. This also calls @@ -462,7 +485,7 @@ static int soc_pcm_open(struct snd_pcm_substream *substream) struct snd_soc_dai *cpu_dai = rtd->cpu_dai; struct snd_soc_dai *codec_dai; const char *codec_dai_name = "multicodec"; - int i, ret = 0, __ret; + int i, ret = 0; pinctrl_pm_select_default_state(cpu_dai->dev); for (i = 0; i < rtd->num_codecs; i++) @@ -486,7 +509,6 @@ static int soc_pcm_open(struct snd_pcm_substream *substream) } } - ret = 0; for_each_rtdcom(rtd, rtdcom) { component = rtdcom->component; @@ -494,16 +516,15 @@ static int soc_pcm_open(struct snd_pcm_substream *substream) !component->driver->ops->open) continue; - __ret = component->driver->ops->open(substream); - if (__ret < 0) { + ret = component->driver->ops->open(substream); + if (ret < 0) { dev_err(component->dev, "ASoC: can't open component %s: %d\n", - component->name, __ret); - ret = __ret; + component->name, ret); + goto component_err; } } - if (ret < 0) - goto component_err; + component = NULL; for (i = 0; i < rtd->num_codecs; i++) { codec_dai = rtd->codec_dais[i]; @@ -612,15 +633,7 @@ codec_dai_err: } component_err: - for_each_rtdcom(rtd, rtdcom) { - component = rtdcom->component; - - if (!component->driver->ops || - !component->driver->ops->close) - continue; - - component->driver->ops->close(substream); - } + soc_pcm_components_close(substream, component); if (cpu_dai->driver->ops->shutdown) cpu_dai->driver->ops->shutdown(substream, cpu_dai); @@ -714,15 +727,7 @@ static int soc_pcm_close(struct snd_pcm_substream *substream) if (rtd->dai_link->ops->shutdown) rtd->dai_link->ops->shutdown(substream); - for_each_rtdcom(rtd, rtdcom) { - component = rtdcom->component; - - if (!component->driver->ops || - !component->driver->ops->close) - continue; - - component->driver->ops->close(substream); - } + soc_pcm_components_close(substream, NULL); if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { if (snd_soc_runtime_ignore_pmdown_time(rtd)) { @@ -874,6 +879,29 @@ int soc_dai_hw_params(struct snd_pcm_substream *substream, return 0; } +static int soc_pcm_components_hw_free(struct snd_pcm_substream *substream, + struct snd_soc_component *last) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_rtdcom_list *rtdcom; + struct snd_soc_component *component; + + for_each_rtdcom(rtd, rtdcom) { + component = rtdcom->component; + + if (component == last) + break; + + if (!component->driver->ops || + !component->driver->ops->hw_free) + continue; + + component->driver->ops->hw_free(substream); + } + + return 0; +} + /* * Called by ALSA when the hardware params are set by application. This * function can also be called multiple times and can allocate buffers @@ -886,7 +914,7 @@ static int soc_pcm_hw_params(struct snd_pcm_substream *substream, struct snd_soc_component *component; struct snd_soc_rtdcom_list *rtdcom; struct snd_soc_dai *cpu_dai = rtd->cpu_dai; - int i, ret = 0, __ret; + int i, ret = 0; mutex_lock_nested(&rtd->pcm_mutex, rtd->pcm_subclass); if (rtd->dai_link->ops->hw_params) { @@ -944,7 +972,6 @@ static int soc_pcm_hw_params(struct snd_pcm_substream *substream, if (ret < 0) goto interface_err; - ret = 0; for_each_rtdcom(rtd, rtdcom) { component = rtdcom->component; @@ -952,16 +979,15 @@ static int soc_pcm_hw_params(struct snd_pcm_substream *substream, !component->driver->ops->hw_params) continue; - __ret = component->driver->ops->hw_params(substream, params); - if (__ret < 0) { + ret = component->driver->ops->hw_params(substream, params); + if (ret < 0) { dev_err(component->dev, "ASoC: %s hw params failed: %d\n", - component->name, __ret); - ret = __ret; + component->name, ret); + goto component_err; } } - if (ret < 0) - goto component_err; + component = NULL; /* store the parameters for each DAIs */ cpu_dai->rate = params_rate(params); @@ -977,15 +1003,7 @@ out: return ret; component_err: - for_each_rtdcom(rtd, rtdcom) { - component = rtdcom->component; - - if (!component->driver->ops || - !component->driver->ops->hw_free) - continue; - - component->driver->ops->hw_free(substream); - } + soc_pcm_components_hw_free(substream, component); if (cpu_dai->driver->ops->hw_free) cpu_dai->driver->ops->hw_free(substream, cpu_dai); @@ -1014,8 +1032,6 @@ codec_err: static int soc_pcm_hw_free(struct snd_pcm_substream *substream) { struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_component *component; - struct snd_soc_rtdcom_list *rtdcom; struct snd_soc_dai *cpu_dai = rtd->cpu_dai; struct snd_soc_dai *codec_dai; bool playback = substream->stream == SNDRV_PCM_STREAM_PLAYBACK; @@ -1052,15 +1068,7 @@ static int soc_pcm_hw_free(struct snd_pcm_substream *substream) rtd->dai_link->ops->hw_free(substream); /* free any component resources */ - for_each_rtdcom(rtd, rtdcom) { - component = rtdcom->component; - - if (!component->driver->ops || - !component->driver->ops->hw_free) - continue; - - component->driver->ops->hw_free(substream); - } + soc_pcm_components_hw_free(substream, NULL); /* now free hw params for the DAIs */ for (i = 0; i < rtd->num_codecs; i++) { -- cgit v1.2.3 From 9fba738a53dda20e748d6ee240b6c017c8146b4b Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Tue, 19 Jun 2018 16:41:41 +0200 Subject: clk: add duty cycle support Add the possibility to apply and query the clock signal duty cycle ratio. This is useful when the duty cycle of the clock signal depends on some other parameters controlled by the clock framework. For example, the duty cycle of a divider may depends on the raw divider setting (ratio = N / div) , which is controlled by the CCF. In such case, going through the pwm framework to control the duty cycle ratio of this clock would be a burden. A clock provider is not required to implement the operation to set and get the duty cycle. If it does not implement .get_duty_cycle(), the ratio is assumed to be 50%. This change also adds a new flag, CLK_DUTY_CYCLE_PARENT. This flag should be used to indicate that a clock, such as gates and muxes, may inherit the duty cycle ratio of its parent clock. If a clock does not provide a get_duty_cycle() callback and has CLK_DUTY_CYCLE_PARENT, then the call will be directly forwarded to its parent clock, if any. For set_duty_cycle(), the clock should also have CLK_SET_RATE_PARENT for the call to be forwarded Signed-off-by: Jerome Brunet Signed-off-by: Michael Turquette Link: lkml.kernel.org/r/20180619144141.8506-1-jbrunet@baylibre.com --- drivers/clk/clk.c | 199 +++++++++++++++++++++++++++++++++++++++++-- include/linux/clk-provider.h | 26 ++++++ include/linux/clk.h | 33 +++++++ include/trace/events/clk.h | 36 ++++++++ 4 files changed, 289 insertions(+), 5 deletions(-) diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index 9760b526ca31..b0a2719d86f3 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -68,6 +68,7 @@ struct clk_core { unsigned long max_rate; unsigned long accuracy; int phase; + struct clk_duty duty; struct hlist_head children; struct hlist_node child_node; struct hlist_head clks; @@ -2402,6 +2403,172 @@ int clk_get_phase(struct clk *clk) } EXPORT_SYMBOL_GPL(clk_get_phase); +static void clk_core_reset_duty_cycle_nolock(struct clk_core *core) +{ + /* Assume a default value of 50% */ + core->duty.num = 1; + core->duty.den = 2; +} + +static int clk_core_update_duty_cycle_parent_nolock(struct clk_core *core); + +static int clk_core_update_duty_cycle_nolock(struct clk_core *core) +{ + struct clk_duty *duty = &core->duty; + int ret = 0; + + if (!core->ops->get_duty_cycle) + return clk_core_update_duty_cycle_parent_nolock(core); + + ret = core->ops->get_duty_cycle(core->hw, duty); + if (ret) + goto reset; + + /* Don't trust the clock provider too much */ + if (duty->den == 0 || duty->num > duty->den) { + ret = -EINVAL; + goto reset; + } + + return 0; + +reset: + clk_core_reset_duty_cycle_nolock(core); + return ret; +} + +static int clk_core_update_duty_cycle_parent_nolock(struct clk_core *core) +{ + int ret = 0; + + if (core->parent && + core->flags & CLK_DUTY_CYCLE_PARENT) { + ret = clk_core_update_duty_cycle_nolock(core->parent); + memcpy(&core->duty, &core->parent->duty, sizeof(core->duty)); + } else { + clk_core_reset_duty_cycle_nolock(core); + } + + return ret; +} + +static int clk_core_set_duty_cycle_parent_nolock(struct clk_core *core, + struct clk_duty *duty); + +static int clk_core_set_duty_cycle_nolock(struct clk_core *core, + struct clk_duty *duty) +{ + int ret; + + lockdep_assert_held(&prepare_lock); + + if (clk_core_rate_is_protected(core)) + return -EBUSY; + + trace_clk_set_duty_cycle(core, duty); + + if (!core->ops->set_duty_cycle) + return clk_core_set_duty_cycle_parent_nolock(core, duty); + + ret = core->ops->set_duty_cycle(core->hw, duty); + if (!ret) + memcpy(&core->duty, duty, sizeof(*duty)); + + trace_clk_set_duty_cycle_complete(core, duty); + + return ret; +} + +static int clk_core_set_duty_cycle_parent_nolock(struct clk_core *core, + struct clk_duty *duty) +{ + int ret = 0; + + if (core->parent && + core->flags & (CLK_DUTY_CYCLE_PARENT | CLK_SET_RATE_PARENT)) { + ret = clk_core_set_duty_cycle_nolock(core->parent, duty); + memcpy(&core->duty, &core->parent->duty, sizeof(core->duty)); + } + + return ret; +} + +/** + * clk_set_duty_cycle - adjust the duty cycle ratio of a clock signal + * @clk: clock signal source + * @num: numerator of the duty cycle ratio to be applied + * @den: denominator of the duty cycle ratio to be applied + * + * Apply the duty cycle ratio if the ratio is valid and the clock can + * perform this operation + * + * Returns (0) on success, a negative errno otherwise. + */ +int clk_set_duty_cycle(struct clk *clk, unsigned int num, unsigned int den) +{ + int ret; + struct clk_duty duty; + + if (!clk) + return 0; + + /* sanity check the ratio */ + if (den == 0 || num > den) + return -EINVAL; + + duty.num = num; + duty.den = den; + + clk_prepare_lock(); + + if (clk->exclusive_count) + clk_core_rate_unprotect(clk->core); + + ret = clk_core_set_duty_cycle_nolock(clk->core, &duty); + + if (clk->exclusive_count) + clk_core_rate_protect(clk->core); + + clk_prepare_unlock(); + + return ret; +} +EXPORT_SYMBOL_GPL(clk_set_duty_cycle); + +static int clk_core_get_scaled_duty_cycle(struct clk_core *core, + unsigned int scale) +{ + struct clk_duty *duty = &core->duty; + int ret; + + clk_prepare_lock(); + + ret = clk_core_update_duty_cycle_nolock(core); + if (!ret) + ret = mult_frac(scale, duty->num, duty->den); + + clk_prepare_unlock(); + + return ret; +} + +/** + * clk_get_scaled_duty_cycle - return the duty cycle ratio of a clock signal + * @clk: clock signal source + * @scale: scaling factor to be applied to represent the ratio as an integer + * + * Returns the duty cycle ratio of a clock node multiplied by the provided + * scaling factor, or negative errno on error. + */ +int clk_get_scaled_duty_cycle(struct clk *clk, unsigned int scale) +{ + if (!clk) + return 0; + + return clk_core_get_scaled_duty_cycle(clk->core, scale); +} +EXPORT_SYMBOL_GPL(clk_get_scaled_duty_cycle); + /** * clk_is_match - check if two clk's point to the same hardware clock * @p: clk compared against q @@ -2455,12 +2622,13 @@ static void clk_summary_show_one(struct seq_file *s, struct clk_core *c, if (!c) return; - seq_printf(s, "%*s%-*s %7d %8d %8d %11lu %10lu %-3d\n", + seq_printf(s, "%*s%-*s %7d %8d %8d %11lu %10lu %5d %6d\n", level * 3 + 1, "", 30 - level * 3, c->name, c->enable_count, c->prepare_count, c->protect_count, clk_core_get_rate(c), clk_core_get_accuracy(c), - clk_core_get_phase(c)); + clk_core_get_phase(c), + clk_core_get_scaled_duty_cycle(c, 100000)); } static void clk_summary_show_subtree(struct seq_file *s, struct clk_core *c, @@ -2482,9 +2650,9 @@ static int clk_summary_show(struct seq_file *s, void *data) struct clk_core *c; struct hlist_head **lists = (struct hlist_head **)s->private; - seq_puts(s, " enable prepare protect \n"); - seq_puts(s, " clock count count count rate accuracy phase\n"); - seq_puts(s, "----------------------------------------------------------------------------------------\n"); + seq_puts(s, " enable prepare protect duty\n"); + seq_puts(s, " clock count count count rate accuracy phase cycle\n"); + seq_puts(s, "---------------------------------------------------------------------------------------------\n"); clk_prepare_lock(); @@ -2511,6 +2679,8 @@ static void clk_dump_one(struct seq_file *s, struct clk_core *c, int level) seq_printf(s, "\"rate\": %lu,", clk_core_get_rate(c)); seq_printf(s, "\"accuracy\": %lu,", clk_core_get_accuracy(c)); seq_printf(s, "\"phase\": %d", clk_core_get_phase(c)); + seq_printf(s, "\"duty_cycle\": %u", + clk_core_get_scaled_duty_cycle(c, 100000)); } static void clk_dump_subtree(struct seq_file *s, struct clk_core *c, int level) @@ -2572,6 +2742,7 @@ static const struct { ENTRY(CLK_SET_RATE_UNGATE), ENTRY(CLK_IS_CRITICAL), ENTRY(CLK_OPS_PARENT_ENABLE), + ENTRY(CLK_DUTY_CYCLE_PARENT), #undef ENTRY }; @@ -2610,6 +2781,17 @@ static int possible_parents_show(struct seq_file *s, void *data) } DEFINE_SHOW_ATTRIBUTE(possible_parents); +static int clk_duty_cycle_show(struct seq_file *s, void *data) +{ + struct clk_core *core = s->private; + struct clk_duty *duty = &core->duty; + + seq_printf(s, "%u/%u\n", duty->num, duty->den); + + return 0; +} +DEFINE_SHOW_ATTRIBUTE(clk_duty_cycle); + static void clk_debug_create_one(struct clk_core *core, struct dentry *pdentry) { struct dentry *root; @@ -2628,6 +2810,8 @@ static void clk_debug_create_one(struct clk_core *core, struct dentry *pdentry) debugfs_create_u32("clk_enable_count", 0444, root, &core->enable_count); debugfs_create_u32("clk_protect_count", 0444, root, &core->protect_count); debugfs_create_u32("clk_notifier_count", 0444, root, &core->notifier_count); + debugfs_create_file("clk_duty_cycle", 0444, root, core, + &clk_duty_cycle_fops); if (core->num_parents > 1) debugfs_create_file("clk_possible_parents", 0444, root, core, @@ -2845,6 +3029,11 @@ static int __clk_core_init(struct clk_core *core) else core->phase = 0; + /* + * Set clk's duty cycle. + */ + clk_core_update_duty_cycle_nolock(core); + /* * Set clk's rate. The preferred method is to use .recalc_rate. For * simple clocks and lazy developers the default fallback is to use the diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index b7cfa037e593..08b1aa70a38d 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -38,6 +38,8 @@ #define CLK_IS_CRITICAL BIT(11) /* do not gate, ever */ /* parents need enable during gate/ungate, set rate and re-parent */ #define CLK_OPS_PARENT_ENABLE BIT(12) +/* duty cycle call may be forwarded to the parent clock */ +#define CLK_DUTY_CYCLE_PARENT BIT(13) struct clk; struct clk_hw; @@ -66,6 +68,17 @@ struct clk_rate_request { struct clk_hw *best_parent_hw; }; +/** + * struct clk_duty - Struture encoding the duty cycle ratio of a clock + * + * @num: Numerator of the duty cycle ratio + * @den: Denominator of the duty cycle ratio + */ +struct clk_duty { + unsigned int num; + unsigned int den; +}; + /** * struct clk_ops - Callback operations for hardware clocks; these are to * be provided by the clock implementation, and will be called by drivers @@ -169,6 +182,15 @@ struct clk_rate_request { * by the second argument. Valid values for degrees are * 0-359. Return 0 on success, otherwise -EERROR. * + * @get_duty_cycle: Queries the hardware to get the current duty cycle ratio + * of a clock. Returned values denominator cannot be 0 and must be + * superior or equal to the numerator. + * + * @set_duty_cycle: Apply the duty cycle ratio to this clock signal specified by + * the numerator (2nd argurment) and denominator (3rd argument). + * Argument must be a valid ratio (denominator > 0 + * and >= numerator) Return 0 on success, otherwise -EERROR. + * * @init: Perform platform-specific initialization magic. * This is not not used by any of the basic clock types. * Please consider other ways of solving initialization problems @@ -218,6 +240,10 @@ struct clk_ops { unsigned long parent_accuracy); int (*get_phase)(struct clk_hw *hw); int (*set_phase)(struct clk_hw *hw, int degrees); + int (*get_duty_cycle)(struct clk_hw *hw, + struct clk_duty *duty); + int (*set_duty_cycle)(struct clk_hw *hw, + struct clk_duty *duty); void (*init)(struct clk_hw *hw); void (*debug_init)(struct clk_hw *hw, struct dentry *dentry); }; diff --git a/include/linux/clk.h b/include/linux/clk.h index 0dbd0885b2c2..4f750c481b82 100644 --- a/include/linux/clk.h +++ b/include/linux/clk.h @@ -141,6 +141,27 @@ int clk_set_phase(struct clk *clk, int degrees); */ int clk_get_phase(struct clk *clk); +/** + * clk_set_duty_cycle - adjust the duty cycle ratio of a clock signal + * @clk: clock signal source + * @num: numerator of the duty cycle ratio to be applied + * @den: denominator of the duty cycle ratio to be applied + * + * Adjust the duty cycle of a clock signal by the specified ratio. Returns 0 on + * success, -EERROR otherwise. + */ +int clk_set_duty_cycle(struct clk *clk, unsigned int num, unsigned int den); + +/** + * clk_get_duty_cycle - return the duty cycle ratio of a clock signal + * @clk: clock signal source + * @scale: scaling factor to be applied to represent the ratio as an integer + * + * Returns the duty cycle ratio multiplied by the scale provided, otherwise + * returns -EERROR. + */ +int clk_get_scaled_duty_cycle(struct clk *clk, unsigned int scale); + /** * clk_is_match - check if two clk's point to the same hardware clock * @p: clk compared against q @@ -183,6 +204,18 @@ static inline long clk_get_phase(struct clk *clk) return -ENOTSUPP; } +static inline int clk_set_duty_cycle(struct clk *clk, unsigned int num, + unsigned int den) +{ + return -ENOTSUPP; +} + +static inline unsigned int clk_get_scaled_duty_cycle(struct clk *clk, + unsigned int scale) +{ + return 0; +} + static inline bool clk_is_match(const struct clk *p, const struct clk *q) { return p == q; diff --git a/include/trace/events/clk.h b/include/trace/events/clk.h index 2cd449328aee..9004ffff7f32 100644 --- a/include/trace/events/clk.h +++ b/include/trace/events/clk.h @@ -192,6 +192,42 @@ DEFINE_EVENT(clk_phase, clk_set_phase_complete, TP_ARGS(core, phase) ); +DECLARE_EVENT_CLASS(clk_duty_cycle, + + TP_PROTO(struct clk_core *core, struct clk_duty *duty), + + TP_ARGS(core, duty), + + TP_STRUCT__entry( + __string( name, core->name ) + __field( unsigned int, num ) + __field( unsigned int, den ) + ), + + TP_fast_assign( + __assign_str(name, core->name); + __entry->num = duty->num; + __entry->den = duty->den; + ), + + TP_printk("%s %u/%u", __get_str(name), (unsigned int)__entry->num, + (unsigned int)__entry->den) +); + +DEFINE_EVENT(clk_duty_cycle, clk_set_duty_cycle, + + TP_PROTO(struct clk_core *core, struct clk_duty *duty), + + TP_ARGS(core, duty) +); + +DEFINE_EVENT(clk_duty_cycle, clk_set_duty_cycle_complete, + + TP_PROTO(struct clk_core *core, struct clk_duty *duty), + + TP_ARGS(core, duty) +); + #endif /* _TRACE_CLK_H */ /* This part must be outside protection */ -- cgit v1.2.3 From 7f7cca08abf4c6c58ff1037cff5beec5a10a7da3 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Wed, 20 Jun 2018 11:56:21 +0100 Subject: ASoC: wm_adsp: Simplify handling of alg offset and length The current code that reads the algorithm list from the DSP is somewhat unclear, it converts directly from bytes to registers using a hard coded divide by 2. Most offsets are usually handled in DSP words within the driver and there is a function specifically for converting from words to register addresses. So update the handling to use these. This also removes the assumption that the registers are 16-bit word addressed, which will no longer be true on some of our newer parts. Signed-off-by: Charles Keepax Signed-off-by: Mark Brown --- sound/soc/codecs/wm_adsp.c | 29 ++++++++++++++++++++--------- 1 file changed, 20 insertions(+), 9 deletions(-) diff --git a/sound/soc/codecs/wm_adsp.c b/sound/soc/codecs/wm_adsp.c index 2fcdd84021a5..07c17acc8a4f 100644 --- a/sound/soc/codecs/wm_adsp.c +++ b/sound/soc/codecs/wm_adsp.c @@ -1871,9 +1871,11 @@ static void wm_adsp_ctl_fixup_base(struct wm_adsp *dsp, } static void *wm_adsp_read_algs(struct wm_adsp *dsp, size_t n_algs, + const struct wm_adsp_region *mem, unsigned int pos, unsigned int len) { void *alg; + unsigned int reg; int ret; __be32 val; @@ -1888,7 +1890,9 @@ static void *wm_adsp_read_algs(struct wm_adsp *dsp, size_t n_algs, } /* Read the terminator first to validate the length */ - ret = regmap_raw_read(dsp->regmap, pos + len, &val, sizeof(val)); + reg = wm_adsp_region_to_reg(mem, pos + len); + + ret = regmap_raw_read(dsp->regmap, reg, &val, sizeof(val)); if (ret != 0) { adsp_err(dsp, "Failed to read algorithm list end: %d\n", ret); @@ -1897,13 +1901,18 @@ static void *wm_adsp_read_algs(struct wm_adsp *dsp, size_t n_algs, if (be32_to_cpu(val) != 0xbedead) adsp_warn(dsp, "Algorithm list end %x 0x%x != 0xbedead\n", - pos + len, be32_to_cpu(val)); + reg, be32_to_cpu(val)); + + /* Convert length from DSP words to bytes */ + len *= sizeof(u32); alg = kcalloc(len, 2, GFP_KERNEL | GFP_DMA); if (!alg) return ERR_PTR(-ENOMEM); - ret = regmap_raw_read(dsp->regmap, pos, alg, len * 2); + reg = wm_adsp_region_to_reg(mem, pos); + + ret = regmap_raw_read(dsp->regmap, reg, alg, len); if (ret != 0) { adsp_err(dsp, "Failed to read algorithm list: %d\n", ret); kfree(alg); @@ -2002,10 +2011,11 @@ static int wm_adsp1_setup_algs(struct wm_adsp *dsp) if (IS_ERR(alg_region)) return PTR_ERR(alg_region); - pos = sizeof(adsp1_id) / 2; - len = (sizeof(*adsp1_alg) * n_algs) / 2; + /* Calculate offset and length in DSP words */ + pos = sizeof(adsp1_id) / sizeof(u32); + len = (sizeof(*adsp1_alg) * n_algs) / sizeof(u32); - adsp1_alg = wm_adsp_read_algs(dsp, n_algs, mem->base + pos, len); + adsp1_alg = wm_adsp_read_algs(dsp, n_algs, mem, pos, len); if (IS_ERR(adsp1_alg)) return PTR_ERR(adsp1_alg); @@ -2113,10 +2123,11 @@ static int wm_adsp2_setup_algs(struct wm_adsp *dsp) if (IS_ERR(alg_region)) return PTR_ERR(alg_region); - pos = sizeof(adsp2_id) / 2; - len = (sizeof(*adsp2_alg) * n_algs) / 2; + /* Calculate offset and length in DSP words */ + pos = sizeof(adsp2_id) / sizeof(u32); + len = (sizeof(*adsp2_alg) * n_algs) / sizeof(u32); - adsp2_alg = wm_adsp_read_algs(dsp, n_algs, mem->base + pos, len); + adsp2_alg = wm_adsp_read_algs(dsp, n_algs, mem, pos, len); if (IS_ERR(adsp2_alg)) return PTR_ERR(adsp2_alg); -- cgit v1.2.3 From 1b31de922e28de2bf2078b7a1e341ad4aee6aa03 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Wed, 20 Jun 2018 11:56:20 +0100 Subject: ASoC: arizona: Set compressed IRQ to a wake source The current code is not setting the compressed IRQ as a wake source. Normally this doesn't cause any issues as the CODEC IRQ is set as a wake source by the jack detection code and the CODEC only produces a single IRQ line. However if the system is not using jack detection the compressed audio IRQ should still function as a wake source, as such directly set the compressed audio IRQ as a wake source. Signed-off-by: Charles Keepax Signed-off-by: Mark Brown --- sound/soc/codecs/cs47l24.c | 8 ++++++++ sound/soc/codecs/wm5102.c | 8 ++++++++ sound/soc/codecs/wm5110.c | 8 ++++++++ 3 files changed, 24 insertions(+) diff --git a/sound/soc/codecs/cs47l24.c b/sound/soc/codecs/cs47l24.c index 196e9c343aeb..0da52ead91e0 100644 --- a/sound/soc/codecs/cs47l24.c +++ b/sound/soc/codecs/cs47l24.c @@ -1283,6 +1283,12 @@ static int cs47l24_probe(struct platform_device *pdev) return ret; } + ret = arizona_set_irq_wake(arizona, ARIZONA_IRQ_DSP_IRQ1, 1); + if (ret != 0) + dev_warn(&pdev->dev, + "Failed to set compressed IRQ as a wake source: %d\n", + ret); + arizona_init_common(arizona); ret = arizona_init_vol_limit(arizona); @@ -1306,6 +1312,7 @@ static int cs47l24_probe(struct platform_device *pdev) err_spk_irqs: arizona_free_spk_irqs(arizona); err_dsp_irq: + arizona_set_irq_wake(arizona, ARIZONA_IRQ_DSP_IRQ1, 0); arizona_free_irq(arizona, ARIZONA_IRQ_DSP_IRQ1, cs47l24); return ret; @@ -1323,6 +1330,7 @@ static int cs47l24_remove(struct platform_device *pdev) arizona_free_spk_irqs(arizona); + arizona_set_irq_wake(arizona, ARIZONA_IRQ_DSP_IRQ1, 0); arizona_free_irq(arizona, ARIZONA_IRQ_DSP_IRQ1, cs47l24); return 0; diff --git a/sound/soc/codecs/wm5102.c b/sound/soc/codecs/wm5102.c index 1ac83388d1b8..a01a0c0e01eb 100644 --- a/sound/soc/codecs/wm5102.c +++ b/sound/soc/codecs/wm5102.c @@ -2094,6 +2094,12 @@ static int wm5102_probe(struct platform_device *pdev) return ret; } + ret = arizona_set_irq_wake(arizona, ARIZONA_IRQ_DSP_IRQ1, 1); + if (ret != 0) + dev_warn(&pdev->dev, + "Failed to set compressed IRQ as a wake source: %d\n", + ret); + arizona_init_common(arizona); ret = arizona_init_vol_limit(arizona); @@ -2117,6 +2123,7 @@ static int wm5102_probe(struct platform_device *pdev) err_spk_irqs: arizona_free_spk_irqs(arizona); err_dsp_irq: + arizona_set_irq_wake(arizona, ARIZONA_IRQ_DSP_IRQ1, 0); arizona_free_irq(arizona, ARIZONA_IRQ_DSP_IRQ1, wm5102); return ret; @@ -2133,6 +2140,7 @@ static int wm5102_remove(struct platform_device *pdev) arizona_free_spk_irqs(arizona); + arizona_set_irq_wake(arizona, ARIZONA_IRQ_DSP_IRQ1, 0); arizona_free_irq(arizona, ARIZONA_IRQ_DSP_IRQ1, wm5102); return 0; diff --git a/sound/soc/codecs/wm5110.c b/sound/soc/codecs/wm5110.c index fb9835dcd836..00c735c585d9 100644 --- a/sound/soc/codecs/wm5110.c +++ b/sound/soc/codecs/wm5110.c @@ -2455,6 +2455,12 @@ static int wm5110_probe(struct platform_device *pdev) return ret; } + ret = arizona_set_irq_wake(arizona, ARIZONA_IRQ_DSP_IRQ1, 1); + if (ret != 0) + dev_warn(&pdev->dev, + "Failed to set compressed IRQ as a wake source: %d\n", + ret); + arizona_init_common(arizona); ret = arizona_init_vol_limit(arizona); @@ -2478,6 +2484,7 @@ static int wm5110_probe(struct platform_device *pdev) err_spk_irqs: arizona_free_spk_irqs(arizona); err_dsp_irq: + arizona_set_irq_wake(arizona, ARIZONA_IRQ_DSP_IRQ1, 0); arizona_free_irq(arizona, ARIZONA_IRQ_DSP_IRQ1, wm5110); return ret; @@ -2496,6 +2503,7 @@ static int wm5110_remove(struct platform_device *pdev) arizona_free_spk_irqs(arizona); + arizona_set_irq_wake(arizona, ARIZONA_IRQ_DSP_IRQ1, 0); arizona_free_irq(arizona, ARIZONA_IRQ_DSP_IRQ1, wm5110); return 0; -- cgit v1.2.3 From 2f24ef7413a4d91657ef04e77c27ce0b313e6c95 Mon Sep 17 00:00:00 2001 From: Alexey Brodkin Date: Wed, 29 Nov 2017 11:21:45 +0300 Subject: ARC: Enable machine_desc->init_per_cpu for !CONFIG_SMP machine_desc->init_per_cpu() hook is supposed to be per cpu initialization and would seem to apply equally to UP and/or SMP. Infact the comment in header file seems to suggest it works for UP too, which was not the case and this patch. This enables !CONFIG_SMP build for platforms such as hsdk. Signed-off-by: Alexey Brodkin Signed-off-by: Vineet Gupta [vgupta: trimmeed changelog] --- arch/arc/include/asm/mach_desc.h | 2 -- arch/arc/kernel/irq.c | 2 +- 2 files changed, 1 insertion(+), 3 deletions(-) diff --git a/arch/arc/include/asm/mach_desc.h b/arch/arc/include/asm/mach_desc.h index c28e6c347b49..871f3cb16af9 100644 --- a/arch/arc/include/asm/mach_desc.h +++ b/arch/arc/include/asm/mach_desc.h @@ -34,9 +34,7 @@ struct machine_desc { const char *name; const char **dt_compat; void (*init_early)(void); -#ifdef CONFIG_SMP void (*init_per_cpu)(unsigned int); -#endif void (*init_machine)(void); void (*init_late)(void); diff --git a/arch/arc/kernel/irq.c b/arch/arc/kernel/irq.c index 538b36afe89e..62b185057c04 100644 --- a/arch/arc/kernel/irq.c +++ b/arch/arc/kernel/irq.c @@ -31,10 +31,10 @@ void __init init_IRQ(void) /* a SMP H/w block could do IPI IRQ request here */ if (plat_smp_ops.init_per_cpu) plat_smp_ops.init_per_cpu(smp_processor_id()); +#endif if (machine_desc->init_per_cpu) machine_desc->init_per_cpu(smp_processor_id()); -#endif } /* -- cgit v1.2.3 From 7813c14c9475dbebcd7f41bd498426d01255acf9 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Tue, 19 Jun 2018 17:47:53 +0200 Subject: clk: meson: audio-divider is one based The audio divider is one based. This offset was mistakenly dropped from recalc_rate() when migrating to clk_regmap. Fixes: 88a4e1283681 ("clk: meson: migrate the audio divider clock to clk_regmap") Acked-by: Neil Armstrong Signed-off-by: Jerome Brunet --- drivers/clk/meson/clk-audio-divider.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/meson/clk-audio-divider.c b/drivers/clk/meson/clk-audio-divider.c index 58f546e04807..e4cf96ba704e 100644 --- a/drivers/clk/meson/clk-audio-divider.c +++ b/drivers/clk/meson/clk-audio-divider.c @@ -51,7 +51,7 @@ static unsigned long audio_divider_recalc_rate(struct clk_hw *hw, struct meson_clk_audio_div_data *adiv = meson_clk_audio_div_data(clk); unsigned long divider; - divider = meson_parm_read(clk->map, &adiv->div); + divider = meson_parm_read(clk->map, &adiv->div) + 1; return DIV_ROUND_UP_ULL((u64)parent_rate, divider); } -- cgit v1.2.3 From 4f722a6a736765310bc95dd3879f1545e5f64303 Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Tue, 19 Jun 2018 14:00:37 -0500 Subject: ASoC: Intel: common: rename 'reef' to 'sof' in ACPI matching table Align with firmware tools, no functionality change Signed-off-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- sound/soc/intel/common/soc-acpi-intel-byt-match.c | 40 ++++++++--------- sound/soc/intel/common/soc-acpi-intel-cht-match.c | 52 +++++++++++----------- .../intel/common/soc-acpi-intel-hsw-bdw-match.c | 16 +++---- 3 files changed, 54 insertions(+), 54 deletions(-) diff --git a/sound/soc/intel/common/soc-acpi-intel-byt-match.c b/sound/soc/intel/common/soc-acpi-intel-byt-match.c index bfe1ca68a542..4daa8a4f0c0c 100644 --- a/sound/soc/intel/common/soc-acpi-intel-byt-match.c +++ b/sound/soc/intel/common/soc-acpi-intel-byt-match.c @@ -59,8 +59,8 @@ static struct snd_soc_acpi_mach byt_thinkpad_10 = { .drv_name = "cht-bsw-rt5672", .fw_filename = "intel/fw_sst_0f28.bin", .board = "cht-bsw", - .sof_fw_filename = "intel/reef-byt.ri", - .sof_tplg_filename = "intel/reef-byt-rt5670.tplg", + .sof_fw_filename = "intel/sof-byt.ri", + .sof_tplg_filename = "intel/sof-byt-rt5670.tplg", .asoc_plat_name = "sst-mfld-platform", }; @@ -98,8 +98,8 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_baytrail_machines[] = { .fw_filename = "intel/fw_sst_0f28.bin", .board = "bytcr_rt5640", .machine_quirk = byt_quirk, - .sof_fw_filename = "intel/reef-byt.ri", - .sof_tplg_filename = "intel/reef-byt-rt5640.tplg", + .sof_fw_filename = "intel/sof-byt.ri", + .sof_tplg_filename = "intel/sof-byt-rt5640.tplg", .asoc_plat_name = "sst-mfld-platform", }, { @@ -107,8 +107,8 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_baytrail_machines[] = { .drv_name = "bytcr_rt5640", .fw_filename = "intel/fw_sst_0f28.bin", .board = "bytcr_rt5640", - .sof_fw_filename = "intel/reef-byt.ri", - .sof_tplg_filename = "intel/reef-byt-rt5640.tplg", + .sof_fw_filename = "intel/sof-byt.ri", + .sof_tplg_filename = "intel/sof-byt-rt5640.tplg", .asoc_plat_name = "sst-mfld-platform", }, { @@ -116,8 +116,8 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_baytrail_machines[] = { .drv_name = "bytcr_rt5640", .fw_filename = "intel/fw_sst_0f28.bin", .board = "bytcr_rt5640", - .sof_fw_filename = "intel/reef-byt.ri", - .sof_tplg_filename = "intel/reef-byt-rt5640.tplg", + .sof_fw_filename = "intel/sof-byt.ri", + .sof_tplg_filename = "intel/sof-byt-rt5640.tplg", .asoc_plat_name = "sst-mfld-platform", }, { @@ -125,8 +125,8 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_baytrail_machines[] = { .drv_name = "bytcr_rt5651", .fw_filename = "intel/fw_sst_0f28.bin", .board = "bytcr_rt5651", - .sof_fw_filename = "intel/reef-byt.ri", - .sof_tplg_filename = "intel/reef-byt-rt5651.tplg", + .sof_fw_filename = "intel/sof-byt.ri", + .sof_tplg_filename = "intel/sof-byt-rt5651.tplg", .asoc_plat_name = "sst-mfld-platform", }, { @@ -134,8 +134,8 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_baytrail_machines[] = { .drv_name = "bytcht_da7213", .fw_filename = "intel/fw_sst_0f28.bin", .board = "bytcht_da7213", - .sof_fw_filename = "intel/reef-byt.ri", - .sof_tplg_filename = "intel/reef-byt-da7213.tplg", + .sof_fw_filename = "intel/sof-byt.ri", + .sof_tplg_filename = "intel/sof-byt-da7213.tplg", .asoc_plat_name = "sst-mfld-platform", }, { @@ -143,8 +143,8 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_baytrail_machines[] = { .drv_name = "bytcht_da7213", .fw_filename = "intel/fw_sst_0f28.bin", .board = "bytcht_da7213", - .sof_fw_filename = "intel/reef-byt.ri", - .sof_tplg_filename = "intel/reef-byt-da7213.tplg", + .sof_fw_filename = "intel/sof-byt.ri", + .sof_tplg_filename = "intel/sof-byt-da7213.tplg", .asoc_plat_name = "sst-mfld-platform", }, /* some Baytrail platforms rely on RT5645, use CHT machine driver */ @@ -153,8 +153,8 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_baytrail_machines[] = { .drv_name = "cht-bsw-rt5645", .fw_filename = "intel/fw_sst_0f28.bin", .board = "cht-bsw", - .sof_fw_filename = "intel/reef-byt.ri", - .sof_tplg_filename = "intel/reef-byt-rt5645.tplg", + .sof_fw_filename = "intel/sof-byt.ri", + .sof_tplg_filename = "intel/sof-byt-rt5645.tplg", .asoc_plat_name = "sst-mfld-platform", }, { @@ -162,8 +162,8 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_baytrail_machines[] = { .drv_name = "cht-bsw-rt5645", .fw_filename = "intel/fw_sst_0f28.bin", .board = "cht-bsw", - .sof_fw_filename = "intel/reef-byt.ri", - .sof_tplg_filename = "intel/reef-byt-rt5645.tplg", + .sof_fw_filename = "intel/sof-byt.ri", + .sof_tplg_filename = "intel/sof-byt-rt5645.tplg", .asoc_plat_name = "sst-mfld-platform", }, /* use CHT driver to Baytrail Chromebooks */ @@ -172,8 +172,8 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_baytrail_machines[] = { .drv_name = "cht-bsw-max98090", .fw_filename = "intel/fw_sst_0f28.bin", .board = "cht-bsw", - .sof_fw_filename = "intel/reef-byt.ri", - .sof_tplg_filename = "intel/reef-byt-max98090.tplg", + .sof_fw_filename = "intel/sof-byt.ri", + .sof_tplg_filename = "intel/sof-byt-max98090.tplg", .asoc_plat_name = "sst-mfld-platform", }, #if IS_ENABLED(CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH) diff --git a/sound/soc/intel/common/soc-acpi-intel-cht-match.c b/sound/soc/intel/common/soc-acpi-intel-cht-match.c index ad1eb2d644be..3c3f2f8585d7 100644 --- a/sound/soc/intel/common/soc-acpi-intel-cht-match.c +++ b/sound/soc/intel/common/soc-acpi-intel-cht-match.c @@ -44,8 +44,8 @@ static struct snd_soc_acpi_mach cht_surface_mach = { .drv_name = "cht-bsw-rt5645", .fw_filename = "intel/fw_sst_22a8.bin", .board = "cht-bsw", - .sof_fw_filename = "intel/reef-cht.ri", - .sof_tplg_filename = "intel/reef-cht-rt5645.tplg", + .sof_fw_filename = "intel/sof-cht.ri", + .sof_tplg_filename = "intel/sof-cht-rt5645.tplg", .asoc_plat_name = "sst-mfld-platform", }; @@ -68,8 +68,8 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_cherrytrail_machines[] = { .drv_name = "cht-bsw-rt5672", .fw_filename = "intel/fw_sst_22a8.bin", .board = "cht-bsw", - .sof_fw_filename = "intel/reef-cht.ri", - .sof_tplg_filename = "intel/reef-cht-rt5670.tplg", + .sof_fw_filename = "intel/sof-cht.ri", + .sof_tplg_filename = "intel/sof-cht-rt5670.tplg", .asoc_plat_name = "sst-mfld-platform", }, { @@ -77,8 +77,8 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_cherrytrail_machines[] = { .drv_name = "cht-bsw-rt5672", .fw_filename = "intel/fw_sst_22a8.bin", .board = "cht-bsw", - .sof_fw_filename = "intel/reef-cht.ri", - .sof_tplg_filename = "intel/reef-cht-rt5670.tplg", + .sof_fw_filename = "intel/sof-cht.ri", + .sof_tplg_filename = "intel/sof-cht-rt5670.tplg", .asoc_plat_name = "sst-mfld-platform", }, { @@ -86,8 +86,8 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_cherrytrail_machines[] = { .drv_name = "cht-bsw-rt5645", .fw_filename = "intel/fw_sst_22a8.bin", .board = "cht-bsw", - .sof_fw_filename = "intel/reef-cht.ri", - .sof_tplg_filename = "intel/reef-cht-rt5645.tplg", + .sof_fw_filename = "intel/sof-cht.ri", + .sof_tplg_filename = "intel/sof-cht-rt5645.tplg", .asoc_plat_name = "sst-mfld-platform", }, { @@ -95,8 +95,8 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_cherrytrail_machines[] = { .drv_name = "cht-bsw-rt5645", .fw_filename = "intel/fw_sst_22a8.bin", .board = "cht-bsw", - .sof_fw_filename = "intel/reef-cht.ri", - .sof_tplg_filename = "intel/reef-cht-rt5645.tplg", + .sof_fw_filename = "intel/sof-cht.ri", + .sof_tplg_filename = "intel/sof-cht-rt5645.tplg", .asoc_plat_name = "sst-mfld-platform", }, { @@ -104,8 +104,8 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_cherrytrail_machines[] = { .drv_name = "cht-bsw-rt5645", .fw_filename = "intel/fw_sst_22a8.bin", .board = "cht-bsw", - .sof_fw_filename = "intel/reef-cht.ri", - .sof_tplg_filename = "intel/reef-cht-rt5645.tplg", + .sof_fw_filename = "intel/sof-cht.ri", + .sof_tplg_filename = "intel/sof-cht-rt5645.tplg", .asoc_plat_name = "sst-mfld-platform", }, { @@ -113,8 +113,8 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_cherrytrail_machines[] = { .drv_name = "cht-bsw-max98090", .fw_filename = "intel/fw_sst_22a8.bin", .board = "cht-bsw", - .sof_fw_filename = "intel/reef-cht.ri", - .sof_tplg_filename = "intel/reef-cht-max98090.tplg", + .sof_fw_filename = "intel/sof-cht.ri", + .sof_tplg_filename = "intel/sof-cht-max98090.tplg", .asoc_plat_name = "sst-mfld-platform", }, { @@ -131,8 +131,8 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_cherrytrail_machines[] = { .drv_name = "bytcht_da7213", .fw_filename = "intel/fw_sst_22a8.bin", .board = "bytcht_da7213", - .sof_fw_filename = "intel/reef-cht.ri", - .sof_tplg_filename = "intel/reef-cht-da7213.tplg", + .sof_fw_filename = "intel/sof-cht.ri", + .sof_tplg_filename = "intel/sof-cht-da7213.tplg", .asoc_plat_name = "sst-mfld-platform", }, { @@ -140,8 +140,8 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_cherrytrail_machines[] = { .drv_name = "bytcht_da7213", .fw_filename = "intel/fw_sst_22a8.bin", .board = "bytcht_da7213", - .sof_fw_filename = "intel/reef-cht.ri", - .sof_tplg_filename = "intel/reef-cht-da7213.tplg", + .sof_fw_filename = "intel/sof-cht.ri", + .sof_tplg_filename = "intel/sof-cht-da7213.tplg", .asoc_plat_name = "sst-mfld-platform", }, { @@ -149,8 +149,8 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_cherrytrail_machines[] = { .drv_name = "bytcht_es8316", .fw_filename = "intel/fw_sst_22a8.bin", .board = "bytcht_es8316", - .sof_fw_filename = "intel/reef-cht.ri", - .sof_tplg_filename = "intel/reef-cht-es8316.tplg", + .sof_fw_filename = "intel/sof-cht.ri", + .sof_tplg_filename = "intel/sof-cht-es8316.tplg", .asoc_plat_name = "sst-mfld-platform", }, /* some CHT-T platforms rely on RT5640, use Baytrail machine driver */ @@ -160,8 +160,8 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_cherrytrail_machines[] = { .fw_filename = "intel/fw_sst_22a8.bin", .board = "bytcr_rt5640", .machine_quirk = cht_quirk, - .sof_fw_filename = "intel/reef-cht.ri", - .sof_tplg_filename = "intel/reef-cht-rt5640.tplg", + .sof_fw_filename = "intel/sof-cht.ri", + .sof_tplg_filename = "intel/sof-cht-rt5640.tplg", .asoc_plat_name = "sst-mfld-platform", }, { @@ -169,8 +169,8 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_cherrytrail_machines[] = { .drv_name = "bytcr_rt5640", .fw_filename = "intel/fw_sst_22a8.bin", .board = "bytcr_rt5640", - .sof_fw_filename = "intel/reef-cht.ri", - .sof_tplg_filename = "intel/reef-cht-rt5640.tplg", + .sof_fw_filename = "intel/sof-cht.ri", + .sof_tplg_filename = "intel/sof-cht-rt5640.tplg", .asoc_plat_name = "sst-mfld-platform", }, /* some CHT-T platforms rely on RT5651, use Baytrail machine driver */ @@ -179,8 +179,8 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_cherrytrail_machines[] = { .drv_name = "bytcr_rt5651", .fw_filename = "intel/fw_sst_22a8.bin", .board = "bytcr_rt5651", - .sof_fw_filename = "intel/reef-cht.ri", - .sof_tplg_filename = "intel/reef-cht-rt5651.tplg", + .sof_fw_filename = "intel/sof-cht.ri", + .sof_tplg_filename = "intel/sof-cht-rt5651.tplg", .asoc_plat_name = "sst-mfld-platform", }, #if IS_ENABLED(CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH) diff --git a/sound/soc/intel/common/soc-acpi-intel-hsw-bdw-match.c b/sound/soc/intel/common/soc-acpi-intel-hsw-bdw-match.c index 53e7acdfbb81..494a0ea9b029 100644 --- a/sound/soc/intel/common/soc-acpi-intel-hsw-bdw-match.c +++ b/sound/soc/intel/common/soc-acpi-intel-hsw-bdw-match.c @@ -23,8 +23,8 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_haswell_machines[] = { .id = "INT33CA", .drv_name = "haswell-audio", .fw_filename = "intel/IntcSST1.bin", - .sof_fw_filename = "intel/reef-hsw.ri", - .sof_tplg_filename = "intel/reef-hsw.tplg", + .sof_fw_filename = "intel/sof-hsw.ri", + .sof_tplg_filename = "intel/sof-hsw.tplg", .asoc_plat_name = "haswell-pcm-audio", }, {} @@ -36,24 +36,24 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_broadwell_machines[] = { .id = "INT343A", .drv_name = "broadwell-audio", .fw_filename = "intel/IntcSST2.bin", - .sof_fw_filename = "intel/reef-bdw.ri", - .sof_tplg_filename = "intel/reef-bdw-rt286.tplg", + .sof_fw_filename = "intel/sof-bdw.ri", + .sof_tplg_filename = "intel/sof-bdw-rt286.tplg", .asoc_plat_name = "haswell-pcm-audio", }, { .id = "RT5677CE", .drv_name = "bdw-rt5677", .fw_filename = "intel/IntcSST2.bin", - .sof_fw_filename = "intel/reef-bdw.ri", - .sof_tplg_filename = "intel/reef-bdw-rt5677.tplg", + .sof_fw_filename = "intel/sof-bdw.ri", + .sof_tplg_filename = "intel/sof-bdw-rt5677.tplg", .asoc_plat_name = "haswell-pcm-audio", }, { .id = "INT33CA", .drv_name = "haswell-audio", .fw_filename = "intel/IntcSST2.bin", - .sof_fw_filename = "intel/reef-bdw.ri", - .sof_tplg_filename = "intel/reef-bdw-rt5640.tplg", + .sof_fw_filename = "intel/sof-bdw.ri", + .sof_tplg_filename = "intel/sof-bdw-rt5640.tplg", .asoc_plat_name = "haswell-pcm-audio", }, {} -- cgit v1.2.3 From 76053854f7d10ca4fa492495f65798e3d48a64c4 Mon Sep 17 00:00:00 2001 From: Gustavo Pimentel Date: Thu, 21 Jun 2018 15:06:14 +0100 Subject: ARC: [plat-hsdk] Add PCIe support Add PCI support to the ARC HSDK platform allowing to use the generic PCI setup functions. Signed-off-by: Gustavo Pimentel Acked-by: Alexey Brodkin Signed-off-by: Vineet Gupta --- arch/arc/plat-hsdk/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arc/plat-hsdk/Kconfig b/arch/arc/plat-hsdk/Kconfig index 19ab3cf98f0f..556bc5ef1257 100644 --- a/arch/arc/plat-hsdk/Kconfig +++ b/arch/arc/plat-hsdk/Kconfig @@ -9,3 +9,4 @@ menuconfig ARC_SOC_HSDK bool "ARC HS Development Kit SOC" select CLK_HSDK select RESET_HSDK + select MIGHT_HAVE_PCI -- cgit v1.2.3 From bb450fa59c0772310ebcc704722dd8a0313bf8ed Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Thu, 21 Jun 2018 15:47:35 -0500 Subject: ASoC: Intel: common: fix missing rename from 'reef' to 'sof' Somehow I missed the Nau8824 support which was added in 4.17. Oops Fixes: 4f722a6a736 ("ASoC: Intel: common: rename 'reef' to 'sof' in ACPI matching table") Signed-off-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- sound/soc/intel/common/soc-acpi-intel-cht-match.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/intel/common/soc-acpi-intel-cht-match.c b/sound/soc/intel/common/soc-acpi-intel-cht-match.c index 3c3f2f8585d7..91bb99b69601 100644 --- a/sound/soc/intel/common/soc-acpi-intel-cht-match.c +++ b/sound/soc/intel/common/soc-acpi-intel-cht-match.c @@ -122,8 +122,8 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_cherrytrail_machines[] = { .drv_name = "cht-bsw-nau8824", .fw_filename = "intel/fw_sst_22a8.bin", .board = "cht-bsw", - .sof_fw_filename = "intel/reef-cht.ri", - .sof_tplg_filename = "intel/reef-cht-nau8824.tplg", + .sof_fw_filename = "intel/sof-cht.ri", + .sof_tplg_filename = "intel/sof-cht-nau8824.tplg", .asoc_plat_name = "sst-mfld-platform", }, { -- cgit v1.2.3 From a98ec93d7e378db21a6cdbc6d55feaba9fb4b999 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Fri, 22 Jun 2018 02:23:24 +0000 Subject: ASoC: rt5682: use devm_snd_soc_register_component() Using devm_snd_soc_register_component() and drop all of the code related to .remove hook. Signed-off-by: Wei Yongjun Signed-off-by: Mark Brown --- sound/soc/codecs/rt5682.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) diff --git a/sound/soc/codecs/rt5682.c b/sound/soc/codecs/rt5682.c index 61a97301bcfa..baad177908ab 100644 --- a/sound/soc/codecs/rt5682.c +++ b/sound/soc/codecs/rt5682.c @@ -2630,17 +2630,11 @@ static int rt5682_i2c_probe(struct i2c_client *i2c, } - return snd_soc_register_component(&i2c->dev, &soc_component_dev_rt5682, + return devm_snd_soc_register_component(&i2c->dev, + &soc_component_dev_rt5682, rt5682_dai, ARRAY_SIZE(rt5682_dai)); } -static int rt5682_i2c_remove(struct i2c_client *i2c) -{ - snd_soc_unregister_component(&i2c->dev); - - return 0; -} - static void rt5682_i2c_shutdown(struct i2c_client *client) { struct rt5682_priv *rt5682 = i2c_get_clientdata(client); @@ -2671,7 +2665,6 @@ static struct i2c_driver rt5682_i2c_driver = { .acpi_match_table = ACPI_PTR(rt5682_acpi_match), }, .probe = rt5682_i2c_probe, - .remove = rt5682_i2c_remove, .shutdown = rt5682_i2c_shutdown, .id_table = rt5682_i2c_id, }; -- cgit v1.2.3 From 2854a214f398f2c3315204a05efff11739fec062 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Fri, 22 Jun 2018 02:23:34 +0000 Subject: ASoC: rt1305: use devm_snd_soc_register_component() Using devm_snd_soc_register_component() and drop all of the code related to .remove hook. Signed-off-by: Wei Yongjun Signed-off-by: Mark Brown --- sound/soc/codecs/rt1305.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) diff --git a/sound/soc/codecs/rt1305.c b/sound/soc/codecs/rt1305.c index 421b8fb2fa04..c4452efc7970 100644 --- a/sound/soc/codecs/rt1305.c +++ b/sound/soc/codecs/rt1305.c @@ -1150,17 +1150,11 @@ static int rt1305_i2c_probe(struct i2c_client *i2c, rt1305_reset(rt1305->regmap); rt1305_calibrate(rt1305); - return snd_soc_register_component(&i2c->dev, &soc_component_dev_rt1305, + return devm_snd_soc_register_component(&i2c->dev, + &soc_component_dev_rt1305, rt1305_dai, ARRAY_SIZE(rt1305_dai)); } -static int rt1305_i2c_remove(struct i2c_client *i2c) -{ - snd_soc_unregister_component(&i2c->dev); - - return 0; -} - static void rt1305_i2c_shutdown(struct i2c_client *client) { struct rt1305_priv *rt1305 = i2c_get_clientdata(client); @@ -1180,7 +1174,6 @@ static struct i2c_driver rt1305_i2c_driver = { #endif }, .probe = rt1305_i2c_probe, - .remove = rt1305_i2c_remove, .shutdown = rt1305_i2c_shutdown, .id_table = rt1305_i2c_id, }; -- cgit v1.2.3 From 366f074d047b2538cc5d7e4a820bb6c117a3ccec Mon Sep 17 00:00:00 2001 From: Katsuhiro Suzuki Date: Thu, 21 Jun 2018 11:56:28 +0900 Subject: ASoC: uniphier: remove redundant check of PLL ID This patch removes redudant check of PLL ID. struct uniphier_aio_pll enable member has already been checked at is_valid_pll(). Signed-off-by: Katsuhiro Suzuki Signed-off-by: Mark Brown --- sound/soc/uniphier/aio-cpu.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/sound/soc/uniphier/aio-cpu.c b/sound/soc/uniphier/aio-cpu.c index 2d9b7dde2ffa..ee90e6c3937c 100644 --- a/sound/soc/uniphier/aio-cpu.c +++ b/sound/soc/uniphier/aio-cpu.c @@ -219,15 +219,10 @@ static int uniphier_aio_set_pll(struct snd_soc_dai *dai, int pll_id, unsigned int freq_out) { struct uniphier_aio *aio = uniphier_priv(dai); - struct device *dev = &aio->chip->pdev->dev; int ret; if (!is_valid_pll(aio->chip, pll_id)) return -EINVAL; - if (!aio->chip->plls[pll_id].enable) { - dev_err(dev, "PLL(%d) is not implemented\n", pll_id); - return -ENOTSUPP; - } ret = aio_chip_set_pll(aio->chip, pll_id, freq_out); if (ret < 0) -- cgit v1.2.3 From 3bec6fa3cdd338860d4b7d4110a49292646d801e Mon Sep 17 00:00:00 2001 From: "Agrawal, Akshu" Date: Thu, 21 Jun 2018 12:58:16 +0800 Subject: ASoC: AMD: Change codec to channel link as per hardware redesign This is a correction to match acutal hardware configuration. The hardware configuration looks like: I2S_BT -> SPK(Max) + DMIC(Adau) I2S_SP -> DA7219 Headset No actual products have been shipped with previous configuration. Signed-off-by: Akshu Agrawal Signed-off-by: Mark Brown --- sound/soc/amd/acp-da7219-max98357a.c | 27 +++++++++++++++++++-------- 1 file changed, 19 insertions(+), 8 deletions(-) diff --git a/sound/soc/amd/acp-da7219-max98357a.c b/sound/soc/amd/acp-da7219-max98357a.c index ccddc6650b9c..566bd268be3a 100644 --- a/sound/soc/amd/acp-da7219-max98357a.c +++ b/sound/soc/amd/acp-da7219-max98357a.c @@ -148,7 +148,7 @@ static int cz_da7219_startup(struct snd_pcm_substream *substream) snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_RATE, &constraints_rates); - machine->i2s_instance = I2S_BT_INSTANCE; + machine->i2s_instance = I2S_SP_INSTANCE; return da7219_clk_enable(substream); } @@ -163,7 +163,7 @@ static int cz_max_startup(struct snd_pcm_substream *substream) struct snd_soc_card *card = rtd->card; struct acp_platform_info *machine = snd_soc_card_get_drvdata(card); - machine->i2s_instance = I2S_SP_INSTANCE; + machine->i2s_instance = I2S_BT_INSTANCE; return da7219_clk_enable(substream); } @@ -178,7 +178,7 @@ static int cz_dmic_startup(struct snd_pcm_substream *substream) struct snd_soc_card *card = rtd->card; struct acp_platform_info *machine = snd_soc_card_get_drvdata(card); - machine->i2s_instance = I2S_SP_INSTANCE; + machine->i2s_instance = I2S_BT_INSTANCE; return da7219_clk_enable(substream); } @@ -204,16 +204,27 @@ static const struct snd_soc_ops cz_dmic_cap_ops = { static struct snd_soc_dai_link cz_dai_7219_98357[] = { { - .name = "amd-da7219-play-cap", - .stream_name = "Playback and Capture", + .name = "amd-da7219-play", + .stream_name = "Playback", .platform_name = "acp_audio_dma.0.auto", - .cpu_dai_name = "designware-i2s.3.auto", + .cpu_dai_name = "designware-i2s.1.auto", .codec_dai_name = "da7219-hifi", .codec_name = "i2c-DLGS7219:00", .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM, .init = cz_da7219_init, .dpcm_playback = 1, + .ops = &cz_da7219_cap_ops, + }, + { + .name = "amd-da7219-cap", + .stream_name = "Capture", + .platform_name = "acp_audio_dma.0.auto", + .cpu_dai_name = "designware-i2s.2.auto", + .codec_dai_name = "da7219-hifi", + .codec_name = "i2c-DLGS7219:00", + .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF + | SND_SOC_DAIFMT_CBM_CFM, .dpcm_capture = 1, .ops = &cz_da7219_cap_ops, }, @@ -221,7 +232,7 @@ static struct snd_soc_dai_link cz_dai_7219_98357[] = { .name = "amd-max98357-play", .stream_name = "HiFi Playback", .platform_name = "acp_audio_dma.0.auto", - .cpu_dai_name = "designware-i2s.1.auto", + .cpu_dai_name = "designware-i2s.3.auto", .codec_dai_name = "HiFi", .codec_name = "MX98357A:00", .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF @@ -233,7 +244,7 @@ static struct snd_soc_dai_link cz_dai_7219_98357[] = { .name = "dmic", .stream_name = "DMIC Capture", .platform_name = "acp_audio_dma.0.auto", - .cpu_dai_name = "designware-i2s.2.auto", + .cpu_dai_name = "designware-i2s.3.auto", .codec_dai_name = "adau7002-hifi", .codec_name = "ADAU7002:00", .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF -- cgit v1.2.3 From 2718c89a233bf8549fdba0925947b2c3cb887a95 Mon Sep 17 00:00:00 2001 From: Akshu Agrawal Date: Thu, 21 Jun 2018 12:58:17 +0800 Subject: ASoC: AMD: Configure channel 1 or channel 0 for capture ST/CZ SoC have 2 channels for capture in the I2SSP path. The DMA though these channels is done using the same dma descriptors. We configure the channel and enable it on the basis of channel selected by machine driver. Machine driver knows which codec sits on which channel and thus sends the information to dma driver. Signed-off-by: Akshu Agrawal Signed-off-by: Mark Brown --- sound/soc/amd/acp-da7219-max98357a.c | 43 +++++++++++++++++++--- sound/soc/amd/acp-pcm-dma.c | 71 +++++++++++++++++++++++++++++++++++- sound/soc/amd/acp.h | 4 ++ 3 files changed, 111 insertions(+), 7 deletions(-) diff --git a/sound/soc/amd/acp-da7219-max98357a.c b/sound/soc/amd/acp-da7219-max98357a.c index 566bd268be3a..f42606e5879e 100644 --- a/sound/soc/amd/acp-da7219-max98357a.c +++ b/sound/soc/amd/acp-da7219-max98357a.c @@ -149,6 +149,7 @@ static int cz_da7219_startup(struct snd_pcm_substream *substream) &constraints_rates); machine->i2s_instance = I2S_SP_INSTANCE; + machine->capture_channel = CAP_CHANNEL1; return da7219_clk_enable(substream); } @@ -172,7 +173,7 @@ static void cz_max_shutdown(struct snd_pcm_substream *substream) da7219_clk_disable(); } -static int cz_dmic_startup(struct snd_pcm_substream *substream) +static int cz_dmic0_startup(struct snd_pcm_substream *substream) { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_card *card = rtd->card; @@ -182,6 +183,17 @@ static int cz_dmic_startup(struct snd_pcm_substream *substream) return da7219_clk_enable(substream); } +static int cz_dmic1_startup(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_card *card = rtd->card; + struct acp_platform_info *machine = snd_soc_card_get_drvdata(card); + + machine->i2s_instance = I2S_SP_INSTANCE; + machine->capture_channel = CAP_CHANNEL0; + return da7219_clk_enable(substream); +} + static void cz_dmic_shutdown(struct snd_pcm_substream *substream) { da7219_clk_disable(); @@ -197,8 +209,13 @@ static const struct snd_soc_ops cz_max_play_ops = { .shutdown = cz_max_shutdown, }; -static const struct snd_soc_ops cz_dmic_cap_ops = { - .startup = cz_dmic_startup, +static const struct snd_soc_ops cz_dmic0_cap_ops = { + .startup = cz_dmic0_startup, + .shutdown = cz_dmic_shutdown, +}; + +static const struct snd_soc_ops cz_dmic1_cap_ops = { + .startup = cz_dmic1_startup, .shutdown = cz_dmic_shutdown, }; @@ -241,8 +258,9 @@ static struct snd_soc_dai_link cz_dai_7219_98357[] = { .ops = &cz_max_play_ops, }, { - .name = "dmic", - .stream_name = "DMIC Capture", + /* C panel DMIC */ + .name = "dmic0", + .stream_name = "DMIC0 Capture", .platform_name = "acp_audio_dma.0.auto", .cpu_dai_name = "designware-i2s.3.auto", .codec_dai_name = "adau7002-hifi", @@ -250,7 +268,20 @@ static struct snd_soc_dai_link cz_dai_7219_98357[] = { .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM, .dpcm_capture = 1, - .ops = &cz_dmic_cap_ops, + .ops = &cz_dmic0_cap_ops, + }, + { + /* A/B panel DMIC */ + .name = "dmic1", + .stream_name = "DMIC1 Capture", + .platform_name = "acp_audio_dma.0.auto", + .cpu_dai_name = "designware-i2s.2.auto", + .codec_dai_name = "adau7002-hifi", + .codec_name = "ADAU7002:00", + .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF + | SND_SOC_DAIFMT_CBM_CFM, + .dpcm_capture = 1, + .ops = &cz_dmic1_cap_ops, }, }; diff --git a/sound/soc/amd/acp-pcm-dma.c b/sound/soc/amd/acp-pcm-dma.c index 1458b5048498..3c3d398d0d0b 100644 --- a/sound/soc/amd/acp-pcm-dma.c +++ b/sound/soc/amd/acp-pcm-dma.c @@ -336,6 +336,61 @@ static void config_acp_dma(void __iomem *acp_mmio, rtd->dma_dscr_idx_2, asic_type); } +static void acp_dma_cap_channel_enable(void __iomem *acp_mmio, + u16 cap_channel) +{ + u32 val, ch_reg, imr_reg, res_reg; + + switch (cap_channel) { + case CAP_CHANNEL1: + ch_reg = mmACP_I2SMICSP_RER1; + res_reg = mmACP_I2SMICSP_RCR1; + imr_reg = mmACP_I2SMICSP_IMR1; + break; + case CAP_CHANNEL0: + default: + ch_reg = mmACP_I2SMICSP_RER0; + res_reg = mmACP_I2SMICSP_RCR0; + imr_reg = mmACP_I2SMICSP_IMR0; + break; + } + val = acp_reg_read(acp_mmio, + mmACP_I2S_16BIT_RESOLUTION_EN); + if (val & ACP_I2S_MIC_16BIT_RESOLUTION_EN) { + acp_reg_write(0x0, acp_mmio, ch_reg); + /* Set 16bit resolution on capture */ + acp_reg_write(0x2, acp_mmio, res_reg); + } + val = acp_reg_read(acp_mmio, imr_reg); + val &= ~ACP_I2SMICSP_IMR1__I2SMICSP_RXDAM_MASK; + val &= ~ACP_I2SMICSP_IMR1__I2SMICSP_RXFOM_MASK; + acp_reg_write(val, acp_mmio, imr_reg); + acp_reg_write(0x1, acp_mmio, ch_reg); +} + +static void acp_dma_cap_channel_disable(void __iomem *acp_mmio, + u16 cap_channel) +{ + u32 val, ch_reg, imr_reg; + + switch (cap_channel) { + case CAP_CHANNEL1: + imr_reg = mmACP_I2SMICSP_IMR1; + ch_reg = mmACP_I2SMICSP_RER1; + break; + case CAP_CHANNEL0: + default: + imr_reg = mmACP_I2SMICSP_IMR0; + ch_reg = mmACP_I2SMICSP_RER0; + break; + } + val = acp_reg_read(acp_mmio, imr_reg); + val |= ACP_I2SMICSP_IMR1__I2SMICSP_RXDAM_MASK; + val |= ACP_I2SMICSP_IMR1__I2SMICSP_RXFOM_MASK; + acp_reg_write(val, acp_mmio, imr_reg); + acp_reg_write(0x0, acp_mmio, ch_reg); +} + /* Start a given DMA channel transfer */ static void acp_dma_start(void __iomem *acp_mmio, u16 ch_num) { @@ -773,8 +828,10 @@ static int acp_dma_hw_params(struct snd_pcm_substream *substream, if (WARN_ON(!rtd)) return -EINVAL; - if (pinfo) + if (pinfo) { rtd->i2s_instance = pinfo->i2s_instance; + rtd->capture_channel = pinfo->capture_channel; + } if (adata->asic_type == CHIP_STONEY) { val = acp_reg_read(adata->acp_mmio, mmACP_I2S_16BIT_RESOLUTION_EN); @@ -990,6 +1047,18 @@ static int acp_dma_trigger(struct snd_pcm_substream *substream, int cmd) acp_dma_start(rtd->acp_mmio, rtd->ch1); acp_dma_start(rtd->acp_mmio, rtd->ch2); } else { + if (rtd->capture_channel == CAP_CHANNEL0) { + acp_dma_cap_channel_disable(rtd->acp_mmio, + CAP_CHANNEL1); + acp_dma_cap_channel_enable(rtd->acp_mmio, + CAP_CHANNEL0); + } + if (rtd->capture_channel == CAP_CHANNEL1) { + acp_dma_cap_channel_disable(rtd->acp_mmio, + CAP_CHANNEL0); + acp_dma_cap_channel_enable(rtd->acp_mmio, + CAP_CHANNEL1); + } acp_dma_start(rtd->acp_mmio, rtd->ch2); acp_dma_start(rtd->acp_mmio, rtd->ch1); } diff --git a/sound/soc/amd/acp.h b/sound/soc/amd/acp.h index 9cd3e96c84d4..3190fdce6307 100644 --- a/sound/soc/amd/acp.h +++ b/sound/soc/amd/acp.h @@ -55,6 +55,8 @@ #define I2S_SP_INSTANCE 0x01 #define I2S_BT_INSTANCE 0x02 +#define CAP_CHANNEL0 0x00 +#define CAP_CHANNEL1 0x01 #define ACP_TILE_ON_MASK 0x03 #define ACP_TILE_OFF_MASK 0x02 @@ -125,6 +127,7 @@ struct audio_substream_data { unsigned int order; u16 num_of_pages; u16 i2s_instance; + u16 capture_channel; u16 direction; u16 ch1; u16 ch2; @@ -155,6 +158,7 @@ struct audio_drv_data { */ struct acp_platform_info { u16 i2s_instance; + u16 capture_channel; }; union acp_dma_count { -- cgit v1.2.3 From a12f671b4241f53e7cd9dec8770d51549682453b Mon Sep 17 00:00:00 2001 From: Katsuhiro Suzuki Date: Wed, 20 Jun 2018 10:59:59 +0900 Subject: ASoC: add hp-det-gpio and mic-det-gpio to audio graph card binding Add headphone and microphone detection GPIO support to audio graph card same as supported in simple card. Signed-off-by: Katsuhiro Suzuki Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/audio-graph-card.txt | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card.txt b/Documentation/devicetree/bindings/sound/audio-graph-card.txt index d04ea3b1a1dd..7e63e53a901c 100644 --- a/Documentation/devicetree/bindings/sound/audio-graph-card.txt +++ b/Documentation/devicetree/bindings/sound/audio-graph-card.txt @@ -18,6 +18,8 @@ Below are same as Simple-Card. - bitclock-inversion - frame-inversion - mclk-fs +- hp-det-gpio +- mic-det-gpio - dai-tdm-slot-num - dai-tdm-slot-width - clocks / system-clock-frequency -- cgit v1.2.3 From f4c277b817cc9489fffabffb4e15d2f3b686056c Mon Sep 17 00:00:00 2001 From: Jiada Wang Date: Wed, 20 Jun 2018 18:25:20 +0900 Subject: ASoC: soc-pcm: DPCM cares BE channel constraint Current DPCM is caring only FE channel configuration. Sometimes it will be trouble if user selects channel which isn't supported by BE. This patch adds new .dpcm_merged_chan on struct snd_soc_dai_link. DPCM will use FE / BE merged channel if struct snd_soc_dai_link has it. Signed-off-by: Jiada Wang Signed-off-by: Mark Brown --- include/sound/soc.h | 2 ++ sound/soc/soc-pcm.c | 46 ++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 48 insertions(+) diff --git a/include/sound/soc.h b/include/sound/soc.h index 1378dcd2128a..f7579f82cc00 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -957,6 +957,8 @@ struct snd_soc_dai_link { /* DPCM used FE & BE merged format */ unsigned int dpcm_merged_format:1; + /* DPCM used FE & BE merged channel */ + unsigned int dpcm_merged_chan:1; /* pmdown_time is ignored at stop */ unsigned int ignore_pmdown_time:1; diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c index 45b52f7b9690..19ebfc958b9d 100644 --- a/sound/soc/soc-pcm.c +++ b/sound/soc/soc-pcm.c @@ -1715,6 +1715,46 @@ static u64 dpcm_runtime_base_format(struct snd_pcm_substream *substream) return formats; } +static void dpcm_runtime_base_chan(struct snd_pcm_substream *substream, + unsigned int *channels_min, + unsigned int *channels_max) +{ + struct snd_soc_pcm_runtime *fe = substream->private_data; + struct snd_soc_dpcm *dpcm; + int stream = substream->stream; + + if (!fe->dai_link->dpcm_merged_chan) + return; + + *channels_min = 0; + *channels_max = UINT_MAX; + + /* + * It returns merged BE codec channel; + * if FE want to use it (= dpcm_merged_chan) + */ + + list_for_each_entry(dpcm, &fe->dpcm[stream].be_clients, list_be) { + struct snd_soc_pcm_runtime *be = dpcm->be; + struct snd_soc_dai_driver *codec_dai_drv; + struct snd_soc_pcm_stream *codec_stream; + int i; + + for (i = 0; i < be->num_codecs; i++) { + codec_dai_drv = be->codec_dais[i]->driver; + if (stream == SNDRV_PCM_STREAM_PLAYBACK) + codec_stream = &codec_dai_drv->playback; + else + codec_stream = &codec_dai_drv->capture; + + *channels_min = max(*channels_min, + codec_stream->channels_min); + *channels_max = min(*channels_max, + codec_stream->channels_max); + } + } +} + static void dpcm_set_fe_runtime(struct snd_pcm_substream *substream) { struct snd_pcm_runtime *runtime = substream->runtime; @@ -1722,11 +1762,17 @@ static void dpcm_set_fe_runtime(struct snd_pcm_substream *substream) struct snd_soc_dai *cpu_dai = rtd->cpu_dai; struct snd_soc_dai_driver *cpu_dai_drv = cpu_dai->driver; u64 format = dpcm_runtime_base_format(substream); + unsigned int channels_min = 0, channels_max = UINT_MAX; if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) dpcm_init_runtime_hw(runtime, &cpu_dai_drv->playback, format); else dpcm_init_runtime_hw(runtime, &cpu_dai_drv->capture, format); + + dpcm_runtime_base_chan(substream, &channels_min, &channels_max); + + runtime->hw.channels_min = max(channels_min, runtime->hw.channels_min); + runtime->hw.channels_max = min(channels_max, runtime->hw.channels_max); } static int dpcm_fe_dai_do_trigger(struct snd_pcm_substream *substream, int cmd); -- cgit v1.2.3 From b5685d2687d6612adf5eac519eb7008f74dfd1ec Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Sat, 2 Jun 2018 17:26:34 +0200 Subject: batman-adv: Fix bat_ogm_iv best gw refcnt after netlink dump A reference for the best gateway is taken when the list of gateways in the mesh is sent via netlink. This is necessary to check whether the currently dumped entry is the currently selected gateway or not. This information is then transferred as flag BATADV_ATTR_FLAG_BEST. After the comparison of the current entry is done, batadv_iv_gw_dump_entry() has to decrease the reference counter again. Otherwise the reference will be held and thus prevents a proper shutdown of the batman-adv interfaces (and some of the interfaces enslaved in it). Fixes: efb766af06e3 ("batman-adv: add B.A.T.M.A.N. IV bat_gw_dump implementations") Reported-by: Andreas Ziegler Tested-by: Andreas Ziegler Signed-off-by: Sven Eckelmann Acked-by: Marek Lindner Signed-off-by: Simon Wunderlich --- net/batman-adv/bat_iv_ogm.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/batman-adv/bat_iv_ogm.c b/net/batman-adv/bat_iv_ogm.c index be09a9883825..73bf6a93a3cf 100644 --- a/net/batman-adv/bat_iv_ogm.c +++ b/net/batman-adv/bat_iv_ogm.c @@ -2732,7 +2732,7 @@ static int batadv_iv_gw_dump_entry(struct sk_buff *msg, u32 portid, u32 seq, { struct batadv_neigh_ifinfo *router_ifinfo = NULL; struct batadv_neigh_node *router; - struct batadv_gw_node *curr_gw; + struct batadv_gw_node *curr_gw = NULL; int ret = 0; void *hdr; @@ -2780,6 +2780,8 @@ static int batadv_iv_gw_dump_entry(struct sk_buff *msg, u32 portid, u32 seq, ret = 0; out: + if (curr_gw) + batadv_gw_node_put(curr_gw); if (router_ifinfo) batadv_neigh_ifinfo_put(router_ifinfo); if (router) -- cgit v1.2.3 From 9713cb0cf19f1cec6c007e3b37be0697042b6720 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Sat, 2 Jun 2018 17:26:35 +0200 Subject: batman-adv: Fix bat_v best gw refcnt after netlink dump A reference for the best gateway is taken when the list of gateways in the mesh is sent via netlink. This is necessary to check whether the currently dumped entry is the currently selected gateway or not. This information is then transferred as flag BATADV_ATTR_FLAG_BEST. After the comparison of the current entry is done, batadv_v_gw_dump_entry() has to decrease the reference counter again. Otherwise the reference will be held and thus prevents a proper shutdown of the batman-adv interfaces (and some of the interfaces enslaved in it). Fixes: b71bb6f924fe ("batman-adv: add B.A.T.M.A.N. V bat_gw_dump implementations") Signed-off-by: Sven Eckelmann Acked-by: Marek Lindner Signed-off-by: Simon Wunderlich --- net/batman-adv/bat_v.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/batman-adv/bat_v.c b/net/batman-adv/bat_v.c index ec93337ee259..6baec4e68898 100644 --- a/net/batman-adv/bat_v.c +++ b/net/batman-adv/bat_v.c @@ -927,7 +927,7 @@ static int batadv_v_gw_dump_entry(struct sk_buff *msg, u32 portid, u32 seq, { struct batadv_neigh_ifinfo *router_ifinfo = NULL; struct batadv_neigh_node *router; - struct batadv_gw_node *curr_gw; + struct batadv_gw_node *curr_gw = NULL; int ret = 0; void *hdr; @@ -995,6 +995,8 @@ static int batadv_v_gw_dump_entry(struct sk_buff *msg, u32 portid, u32 seq, ret = 0; out: + if (curr_gw) + batadv_gw_node_put(curr_gw); if (router_ifinfo) batadv_neigh_ifinfo_put(router_ifinfo); if (router) -- cgit v1.2.3 From 36dc621ceca1be3ec885aeade5fdafbbcc452a6d Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Fri, 1 Jun 2018 19:24:23 +0200 Subject: batman-adv: Fix debugfs path for renamed hardif batman-adv is creating special debugfs directories in the init net_namespace for each valid hard-interface (net_device). But it is possible to rename a net_device to a completely different name then the original one. It can therefore happen that a user registers a new net_device which gets the name "wlan0" assigned by default. batman-adv is also adding a new directory under $debugfs/batman-adv/ with the name "wlan0". The user then decides to rename this device to "wl_pri" and registers a different device. The kernel may now decide to use the name "wlan0" again for this new device. batman-adv will detect it as a valid net_device and tries to create a directory with the name "wlan0" under $debugfs/batman-adv/. But there already exists one with this name under this path and thus this fails. batman-adv will detect a problem and rollback the registering of this device. batman-adv must therefore take care of renaming the debugfs directories for hard-interfaces whenever it detects such a net_device rename. Fixes: 5bc7c1eb44f2 ("batman-adv: add debugfs structure for information per interface") Reported-by: John Soros Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich --- net/batman-adv/debugfs.c | 20 ++++++++++++++++++++ net/batman-adv/debugfs.h | 6 ++++++ net/batman-adv/hard-interface.c | 3 +++ 3 files changed, 29 insertions(+) diff --git a/net/batman-adv/debugfs.c b/net/batman-adv/debugfs.c index 4229b01ac7b5..7e5de7b9f6d5 100644 --- a/net/batman-adv/debugfs.c +++ b/net/batman-adv/debugfs.c @@ -19,6 +19,7 @@ #include "debugfs.h" #include "main.h" +#include #include #include #include @@ -343,6 +344,25 @@ out: return -ENOMEM; } +/** + * batadv_debugfs_rename_hardif() - Fix debugfs path for renamed hardif + * @hard_iface: hard interface which was renamed + */ +void batadv_debugfs_rename_hardif(struct batadv_hard_iface *hard_iface) +{ + const char *name = hard_iface->net_dev->name; + struct dentry *dir; + struct dentry *d; + + dir = hard_iface->debug_dir; + if (!dir) + return; + + d = debugfs_rename(dir->d_parent, dir, dir->d_parent, name); + if (!d) + pr_err("Can't rename debugfs dir to %s\n", name); +} + /** * batadv_debugfs_del_hardif() - delete the base directory for a hard interface * in debugfs. diff --git a/net/batman-adv/debugfs.h b/net/batman-adv/debugfs.h index 37b069698b04..8538a7a75e93 100644 --- a/net/batman-adv/debugfs.h +++ b/net/batman-adv/debugfs.h @@ -32,6 +32,7 @@ void batadv_debugfs_destroy(void); int batadv_debugfs_add_meshif(struct net_device *dev); void batadv_debugfs_del_meshif(struct net_device *dev); int batadv_debugfs_add_hardif(struct batadv_hard_iface *hard_iface); +void batadv_debugfs_rename_hardif(struct batadv_hard_iface *hard_iface); void batadv_debugfs_del_hardif(struct batadv_hard_iface *hard_iface); #else @@ -59,6 +60,11 @@ int batadv_debugfs_add_hardif(struct batadv_hard_iface *hard_iface) return 0; } +static inline +void batadv_debugfs_rename_hardif(struct batadv_hard_iface *hard_iface) +{ +} + static inline void batadv_debugfs_del_hardif(struct batadv_hard_iface *hard_iface) { diff --git a/net/batman-adv/hard-interface.c b/net/batman-adv/hard-interface.c index c405d15befd6..dc2763b11107 100644 --- a/net/batman-adv/hard-interface.c +++ b/net/batman-adv/hard-interface.c @@ -1051,6 +1051,9 @@ static int batadv_hard_if_event(struct notifier_block *this, if (batadv_is_wifi_hardif(hard_iface)) hard_iface->num_bcasts = BATADV_NUM_BCASTS_WIRELESS; break; + case NETDEV_CHANGENAME: + batadv_debugfs_rename_hardif(hard_iface); + break; default: break; } -- cgit v1.2.3 From 6da7be7d24b2921f8215473ba7552796dff05fe1 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Fri, 1 Jun 2018 19:24:24 +0200 Subject: batman-adv: Fix debugfs path for renamed softif batman-adv is creating special debugfs directories in the init net_namespace for each created soft-interface (batadv net_device). But it is possible to rename a net_device to a completely different name then the original one. It can therefore happen that a user registers a new batadv net_device with the name "bat0". batman-adv is then also adding a new directory under $debugfs/batman-adv/ with the name "wlan0". The user then decides to rename this device to "bat1" and registers a different batadv device with the name "bat0". batman-adv will then try to create a directory with the name "bat0" under $debugfs/batman-adv/ again. But there already exists one with this name under this path and thus this fails. batman-adv will detect a problem and rollback the registering of this device. batman-adv must therefore take care of renaming the debugfs directories for soft-interfaces whenever it detects such a net_device rename. Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol") Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich --- net/batman-adv/debugfs.c | 20 ++++++++++++++++++++ net/batman-adv/debugfs.h | 5 +++++ net/batman-adv/hard-interface.c | 34 ++++++++++++++++++++++++++++------ 3 files changed, 53 insertions(+), 6 deletions(-) diff --git a/net/batman-adv/debugfs.c b/net/batman-adv/debugfs.c index 7e5de7b9f6d5..87479c60670e 100644 --- a/net/batman-adv/debugfs.c +++ b/net/batman-adv/debugfs.c @@ -433,6 +433,26 @@ out: return -ENOMEM; } +/** + * batadv_debugfs_rename_meshif() - Fix debugfs path for renamed softif + * @dev: net_device which was renamed + */ +void batadv_debugfs_rename_meshif(struct net_device *dev) +{ + struct batadv_priv *bat_priv = netdev_priv(dev); + const char *name = dev->name; + struct dentry *dir; + struct dentry *d; + + dir = bat_priv->debug_dir; + if (!dir) + return; + + d = debugfs_rename(dir->d_parent, dir, dir->d_parent, name); + if (!d) + pr_err("Can't rename debugfs dir to %s\n", name); +} + /** * batadv_debugfs_del_meshif() - Remove interface dependent debugfs entries * @dev: netdev struct of the soft interface diff --git a/net/batman-adv/debugfs.h b/net/batman-adv/debugfs.h index 8538a7a75e93..08a592ffbee5 100644 --- a/net/batman-adv/debugfs.h +++ b/net/batman-adv/debugfs.h @@ -30,6 +30,7 @@ struct net_device; void batadv_debugfs_init(void); void batadv_debugfs_destroy(void); int batadv_debugfs_add_meshif(struct net_device *dev); +void batadv_debugfs_rename_meshif(struct net_device *dev); void batadv_debugfs_del_meshif(struct net_device *dev); int batadv_debugfs_add_hardif(struct batadv_hard_iface *hard_iface); void batadv_debugfs_rename_hardif(struct batadv_hard_iface *hard_iface); @@ -50,6 +51,10 @@ static inline int batadv_debugfs_add_meshif(struct net_device *dev) return 0; } +static inline void batadv_debugfs_rename_meshif(struct net_device *dev) +{ +} + static inline void batadv_debugfs_del_meshif(struct net_device *dev) { } diff --git a/net/batman-adv/hard-interface.c b/net/batman-adv/hard-interface.c index dc2763b11107..2f0d42f2f913 100644 --- a/net/batman-adv/hard-interface.c +++ b/net/batman-adv/hard-interface.c @@ -989,6 +989,32 @@ void batadv_hardif_remove_interfaces(void) rtnl_unlock(); } +/** + * batadv_hard_if_event_softif() - Handle events for soft interfaces + * @event: NETDEV_* event to handle + * @net_dev: net_device which generated an event + * + * Return: NOTIFY_* result + */ +static int batadv_hard_if_event_softif(unsigned long event, + struct net_device *net_dev) +{ + struct batadv_priv *bat_priv; + + switch (event) { + case NETDEV_REGISTER: + batadv_sysfs_add_meshif(net_dev); + bat_priv = netdev_priv(net_dev); + batadv_softif_create_vlan(bat_priv, BATADV_NO_FLAGS); + break; + case NETDEV_CHANGENAME: + batadv_debugfs_rename_meshif(net_dev); + break; + } + + return NOTIFY_DONE; +} + static int batadv_hard_if_event(struct notifier_block *this, unsigned long event, void *ptr) { @@ -997,12 +1023,8 @@ static int batadv_hard_if_event(struct notifier_block *this, struct batadv_hard_iface *primary_if = NULL; struct batadv_priv *bat_priv; - if (batadv_softif_is_valid(net_dev) && event == NETDEV_REGISTER) { - batadv_sysfs_add_meshif(net_dev); - bat_priv = netdev_priv(net_dev); - batadv_softif_create_vlan(bat_priv, BATADV_NO_FLAGS); - return NOTIFY_DONE; - } + if (batadv_softif_is_valid(net_dev)) + return batadv_hard_if_event_softif(event, net_dev); hard_iface = batadv_hardif_get_by_netdev(net_dev); if (!hard_iface && (event == NETDEV_REGISTER || -- cgit v1.2.3 From 4a519b83da16927fb98fd32b0f598e639d1f1859 Mon Sep 17 00:00:00 2001 From: Linus Lüssing Date: Thu, 7 Jun 2018 00:46:23 +0200 Subject: batman-adv: Avoid storing non-TT-sync flags on singular entries too MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Since commit 54e22f265e87 ("batman-adv: fix TT sync flag inconsistencies") TT sync flags and TT non-sync'd flags are supposed to be stored separately. The previous patch missed to apply this separation on a TT entry with only a single TT orig entry. This is a minor fix because with only a single TT orig entry the DDoS issue the former patch solves does not apply. Fixes: 54e22f265e87 ("batman-adv: fix TT sync flag inconsistencies") Signed-off-by: Linus Lüssing Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich --- net/batman-adv/translation-table.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c index 3986551397ca..61ce300091f3 100644 --- a/net/batman-adv/translation-table.c +++ b/net/batman-adv/translation-table.c @@ -1705,7 +1705,8 @@ static bool batadv_tt_global_add(struct batadv_priv *bat_priv, ether_addr_copy(common->addr, tt_addr); common->vid = vid; - common->flags = flags; + common->flags = flags & (~BATADV_TT_SYNC_MASK); + tt_global_entry->roam_at = 0; /* node must store current time in case of roaming. This is * needed to purge this entry out on timeout (if nobody claims -- cgit v1.2.3 From a44ebeff6bbd6ef50db41b4195fca87b21aefd20 Mon Sep 17 00:00:00 2001 From: Linus Lüssing Date: Thu, 7 Jun 2018 00:46:24 +0200 Subject: batman-adv: Fix multicast TT issues with bogus ROAM flags MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When a (broken) node wrongly sends multicast TT entries with a ROAM flag then this causes any receiving node to drop all entries for the same multicast MAC address announced by other nodes, leading to packet loss. Fix this DoS vector by only storing TT sync flags. For multicast TT non-sync'ing flag bits like ROAM are unused so far anyway. Fixes: 1d8ab8d3c176 ("batman-adv: Modified forwarding behaviour for multicast packets") Reported-by: Leonardo Mörlein Signed-off-by: Linus Lüssing Signed-off-by: Simon Wunderlich --- net/batman-adv/translation-table.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c index 61ce300091f3..12a2b7d21376 100644 --- a/net/batman-adv/translation-table.c +++ b/net/batman-adv/translation-table.c @@ -1705,7 +1705,8 @@ static bool batadv_tt_global_add(struct batadv_priv *bat_priv, ether_addr_copy(common->addr, tt_addr); common->vid = vid; - common->flags = flags & (~BATADV_TT_SYNC_MASK); + if (!is_multicast_ether_addr(common->addr)) + common->flags = flags & (~BATADV_TT_SYNC_MASK); tt_global_entry->roam_at = 0; /* node must store current time in case of roaming. This is @@ -1769,7 +1770,8 @@ static bool batadv_tt_global_add(struct batadv_priv *bat_priv, * TT_CLIENT_TEMP, therefore they have to be copied in the * client entry */ - common->flags |= flags & (~BATADV_TT_SYNC_MASK); + if (!is_multicast_ether_addr(common->addr)) + common->flags |= flags & (~BATADV_TT_SYNC_MASK); /* If there is the BATADV_TT_CLIENT_ROAM flag set, there is only * one originator left in the list and we previously received a -- cgit v1.2.3 From 8cc88773855f988d6a3bbf102bbd9dd9c828eb81 Mon Sep 17 00:00:00 2001 From: Tommi Rantala Date: Thu, 21 Jun 2018 09:30:47 +0300 Subject: xfrm: fix missing dst_release() after policy blocking lbcast and multicast Fix missing dst_release() when local broadcast or multicast traffic is xfrm policy blocked. For IPv4 this results to dst leak: ip_route_output_flow() allocates dst_entry via __ip_route_output_key() and passes it to xfrm_lookup_route(). xfrm_lookup returns ERR_PTR(-EPERM) that is propagated. The dst that was allocated is never released. IPv4 local broadcast testcase: ping -b 192.168.1.255 & sleep 1 ip xfrm policy add src 0.0.0.0/0 dst 192.168.1.255/32 dir out action block IPv4 multicast testcase: ping 224.0.0.1 & sleep 1 ip xfrm policy add src 0.0.0.0/0 dst 224.0.0.1/32 dir out action block For IPv6 the missing dst_release() causes trouble e.g. when used in netns: ip netns add TEST ip netns exec TEST ip link set lo up ip link add dummy0 type dummy ip link set dev dummy0 netns TEST ip netns exec TEST ip addr add fd00::1111 dev dummy0 ip netns exec TEST ip link set dummy0 up ip netns exec TEST ping -6 -c 5 ff02::1%dummy0 & sleep 1 ip netns exec TEST ip xfrm policy add src ::/0 dst ff02::1 dir out action block wait ip netns del TEST After netns deletion we see: [ 258.239097] unregister_netdevice: waiting for lo to become free. Usage count = 2 [ 268.279061] unregister_netdevice: waiting for lo to become free. Usage count = 2 [ 278.367018] unregister_netdevice: waiting for lo to become free. Usage count = 2 [ 288.375259] unregister_netdevice: waiting for lo to become free. Usage count = 2 Fixes: ac37e2515c1a ("xfrm: release dst_orig in case of error in xfrm_lookup()") Signed-off-by: Tommi Rantala Signed-off-by: Steffen Klassert --- net/xfrm/xfrm_policy.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index 5f48251c1319..7c5e8978aeaa 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -2286,6 +2286,9 @@ struct dst_entry *xfrm_lookup_route(struct net *net, struct dst_entry *dst_orig, if (IS_ERR(dst) && PTR_ERR(dst) == -EREMOTE) return make_blackhole(net, dst_orig->ops->family, dst_orig); + if (IS_ERR(dst)) + dst_release(dst_orig); + return dst; } EXPORT_SYMBOL(xfrm_lookup_route); -- cgit v1.2.3 From 12dfa2f68ab659636e092db13b5d17cf9aac82af Mon Sep 17 00:00:00 2001 From: Ping-Ke Shih Date: Fri, 22 Jun 2018 13:31:57 +0800 Subject: rtlwifi: Fix kernel Oops "Fw download fail!!" When connecting to AP, mac80211 asks driver to enter and leave PS quickly, but driver deinit doesn't wait for delayed work complete when entering PS, then driver reinit procedure and delay work are running simultaneously. This will cause unpredictable kernel oops or crash like rtl8723be: error H2C cmd because of Fw download fail!!! WARNING: CPU: 3 PID: 159 at drivers/net/wireless/realtek/rtlwifi/ rtl8723be/fw.c:227 rtl8723be_fill_h2c_cmd+0x182/0x510 [rtl8723be] CPU: 3 PID: 159 Comm: kworker/3:2 Tainted: G O 4.16.13-2-ARCH #1 Hardware name: ASUSTeK COMPUTER INC. X556UF/X556UF, BIOS X556UF.406 10/21/2016 Workqueue: rtl8723be_pci rtl_c2hcmd_wq_callback [rtlwifi] RIP: 0010:rtl8723be_fill_h2c_cmd+0x182/0x510 [rtl8723be] RSP: 0018:ffffa6ab01e1bd70 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffa26069071520 RCX: 0000000000000001 RDX: 0000000080000001 RSI: ffffffff8be70e9c RDI: 00000000ffffffff RBP: 0000000000000000 R08: 0000000000000048 R09: 0000000000000348 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 R13: ffffa26069071520 R14: 0000000000000000 R15: ffffa2607d205f70 FS: 0000000000000000(0000) GS:ffffa26081d80000(0000) knlGS:000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000443b39d3000 CR3: 000000037700a005 CR4: 00000000003606e0 Call Trace: ? halbtc_send_bt_mp_operation.constprop.17+0xd5/0xe0 [btcoexist] ? ex_btc8723b1ant_bt_info_notify+0x3b8/0x820 [btcoexist] ? rtl_c2hcmd_launcher+0xab/0x110 [rtlwifi] ? process_one_work+0x1d1/0x3b0 ? worker_thread+0x2b/0x3d0 ? process_one_work+0x3b0/0x3b0 ? kthread+0x112/0x130 ? kthread_create_on_node+0x60/0x60 ? ret_from_fork+0x35/0x40 Code: 00 76 b4 e9 e2 fe ff ff 4c 89 ee 4c 89 e7 e8 56 22 86 ca e9 5e ... This patch ensures all delayed works done before entering PS to satisfy our expectation, so use cancel_delayed_work_sync() instead. An exception is delayed work ips_nic_off_wq because running task may be itself, so add a parameter ips_wq to deinit function to handle this case. This issue is reported and fixed in below threads: https://github.com/lwfinger/rtlwifi_new/issues/367 https://github.com/lwfinger/rtlwifi_new/issues/366 Tested-by: Evgeny Kapun # 8723DE Tested-by: Shivam Kakkar # 8723BE on 4.18-rc1 Signed-off-by: Ping-Ke Shih Fixes: cceb0a597320 ("rtlwifi: Add work queue for c2h cmd.") Cc: Stable # 4.11+ Reviewed-by: Larry Finger Signed-off-by: Kalle Valo --- drivers/net/wireless/realtek/rtlwifi/base.c | 17 ++++++++++------- drivers/net/wireless/realtek/rtlwifi/base.h | 2 +- drivers/net/wireless/realtek/rtlwifi/core.c | 2 +- drivers/net/wireless/realtek/rtlwifi/pci.c | 2 +- drivers/net/wireless/realtek/rtlwifi/ps.c | 4 ++-- drivers/net/wireless/realtek/rtlwifi/usb.c | 2 +- 6 files changed, 16 insertions(+), 13 deletions(-) diff --git a/drivers/net/wireless/realtek/rtlwifi/base.c b/drivers/net/wireless/realtek/rtlwifi/base.c index 39c817eddd78..54c9f6ab0c8c 100644 --- a/drivers/net/wireless/realtek/rtlwifi/base.c +++ b/drivers/net/wireless/realtek/rtlwifi/base.c @@ -484,18 +484,21 @@ static void _rtl_init_deferred_work(struct ieee80211_hw *hw) } -void rtl_deinit_deferred_work(struct ieee80211_hw *hw) +void rtl_deinit_deferred_work(struct ieee80211_hw *hw, bool ips_wq) { struct rtl_priv *rtlpriv = rtl_priv(hw); del_timer_sync(&rtlpriv->works.watchdog_timer); - cancel_delayed_work(&rtlpriv->works.watchdog_wq); - cancel_delayed_work(&rtlpriv->works.ips_nic_off_wq); - cancel_delayed_work(&rtlpriv->works.ps_work); - cancel_delayed_work(&rtlpriv->works.ps_rfon_wq); - cancel_delayed_work(&rtlpriv->works.fwevt_wq); - cancel_delayed_work(&rtlpriv->works.c2hcmd_wq); + cancel_delayed_work_sync(&rtlpriv->works.watchdog_wq); + if (ips_wq) + cancel_delayed_work(&rtlpriv->works.ips_nic_off_wq); + else + cancel_delayed_work_sync(&rtlpriv->works.ips_nic_off_wq); + cancel_delayed_work_sync(&rtlpriv->works.ps_work); + cancel_delayed_work_sync(&rtlpriv->works.ps_rfon_wq); + cancel_delayed_work_sync(&rtlpriv->works.fwevt_wq); + cancel_delayed_work_sync(&rtlpriv->works.c2hcmd_wq); } EXPORT_SYMBOL_GPL(rtl_deinit_deferred_work); diff --git a/drivers/net/wireless/realtek/rtlwifi/base.h b/drivers/net/wireless/realtek/rtlwifi/base.h index 912f205779c3..a7ae40eaa3cd 100644 --- a/drivers/net/wireless/realtek/rtlwifi/base.h +++ b/drivers/net/wireless/realtek/rtlwifi/base.h @@ -121,7 +121,7 @@ void rtl_init_rfkill(struct ieee80211_hw *hw); void rtl_deinit_rfkill(struct ieee80211_hw *hw); void rtl_watch_dog_timer_callback(struct timer_list *t); -void rtl_deinit_deferred_work(struct ieee80211_hw *hw); +void rtl_deinit_deferred_work(struct ieee80211_hw *hw, bool ips_wq); bool rtl_action_proc(struct ieee80211_hw *hw, struct sk_buff *skb, u8 is_tx); int rtlwifi_rate_mapping(struct ieee80211_hw *hw, bool isht, diff --git a/drivers/net/wireless/realtek/rtlwifi/core.c b/drivers/net/wireless/realtek/rtlwifi/core.c index cfea57efa7f4..a3f46203ee7a 100644 --- a/drivers/net/wireless/realtek/rtlwifi/core.c +++ b/drivers/net/wireless/realtek/rtlwifi/core.c @@ -196,7 +196,7 @@ static void rtl_op_stop(struct ieee80211_hw *hw) /* reset sec info */ rtl_cam_reset_sec_info(hw); - rtl_deinit_deferred_work(hw); + rtl_deinit_deferred_work(hw, false); } rtlpriv->intf_ops->adapter_stop(hw); diff --git a/drivers/net/wireless/realtek/rtlwifi/pci.c b/drivers/net/wireless/realtek/rtlwifi/pci.c index ae13bcfb3bf0..5d1fda16fc8c 100644 --- a/drivers/net/wireless/realtek/rtlwifi/pci.c +++ b/drivers/net/wireless/realtek/rtlwifi/pci.c @@ -2377,7 +2377,7 @@ void rtl_pci_disconnect(struct pci_dev *pdev) ieee80211_unregister_hw(hw); rtlmac->mac80211_registered = 0; } else { - rtl_deinit_deferred_work(hw); + rtl_deinit_deferred_work(hw, false); rtlpriv->intf_ops->adapter_stop(hw); } rtlpriv->cfg->ops->disable_interrupt(hw); diff --git a/drivers/net/wireless/realtek/rtlwifi/ps.c b/drivers/net/wireless/realtek/rtlwifi/ps.c index 71af24e2e051..479a4cfc245d 100644 --- a/drivers/net/wireless/realtek/rtlwifi/ps.c +++ b/drivers/net/wireless/realtek/rtlwifi/ps.c @@ -71,7 +71,7 @@ bool rtl_ps_disable_nic(struct ieee80211_hw *hw) struct rtl_priv *rtlpriv = rtl_priv(hw); /*<1> Stop all timer */ - rtl_deinit_deferred_work(hw); + rtl_deinit_deferred_work(hw, true); /*<2> Disable Interrupt */ rtlpriv->cfg->ops->disable_interrupt(hw); @@ -292,7 +292,7 @@ void rtl_ips_nic_on(struct ieee80211_hw *hw) struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); enum rf_pwrstate rtstate; - cancel_delayed_work(&rtlpriv->works.ips_nic_off_wq); + cancel_delayed_work_sync(&rtlpriv->works.ips_nic_off_wq); mutex_lock(&rtlpriv->locks.ips_mutex); if (ppsc->inactiveps) { diff --git a/drivers/net/wireless/realtek/rtlwifi/usb.c b/drivers/net/wireless/realtek/rtlwifi/usb.c index f9faffc498bc..2ac5004d7a40 100644 --- a/drivers/net/wireless/realtek/rtlwifi/usb.c +++ b/drivers/net/wireless/realtek/rtlwifi/usb.c @@ -1132,7 +1132,7 @@ void rtl_usb_disconnect(struct usb_interface *intf) ieee80211_unregister_hw(hw); rtlmac->mac80211_registered = 0; } else { - rtl_deinit_deferred_work(hw); + rtl_deinit_deferred_work(hw, false); rtlpriv->intf_ops->adapter_stop(hw); } /*deinit rfkill */ -- cgit v1.2.3 From 373c83a801f15b1e3d02d855fad89112bd4ccbe0 Mon Sep 17 00:00:00 2001 From: Michael Trimarchi Date: Wed, 30 May 2018 11:06:34 +0200 Subject: brcmfmac: stop watchdog before detach and free everything Using built-in in kernel image without a firmware in filesystem or in the kernel image can lead to a kernel NULL pointer deference. Watchdog need to be stopped in brcmf_sdio_remove The system is going down NOW! [ 1348.110759] Unable to handle kernel NULL pointer dereference at virtual address 000002f8 Sent SIGTERM to all processes [ 1348.121412] Mem abort info: [ 1348.126962] ESR = 0x96000004 [ 1348.130023] Exception class = DABT (current EL), IL = 32 bits [ 1348.135948] SET = 0, FnV = 0 [ 1348.138997] EA = 0, S1PTW = 0 [ 1348.142154] Data abort info: [ 1348.145045] ISV = 0, ISS = 0x00000004 [ 1348.148884] CM = 0, WnR = 0 [ 1348.151861] user pgtable: 4k pages, 48-bit VAs, pgdp = (____ptrval____) [ 1348.158475] [00000000000002f8] pgd=0000000000000000 [ 1348.163364] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 1348.168927] Modules linked in: ipv6 [ 1348.172421] CPU: 3 PID: 1421 Comm: brcmf_wdog/mmc0 Not tainted 4.17.0-rc5-next-20180517 #18 [ 1348.180757] Hardware name: Amarula A64-Relic (DT) [ 1348.185455] pstate: 60000005 (nZCv daif -PAN -UAO) [ 1348.190251] pc : brcmf_sdiod_freezer_count+0x0/0x20 [ 1348.195124] lr : brcmf_sdio_watchdog_thread+0x64/0x290 [ 1348.200253] sp : ffff00000b85be30 [ 1348.203561] x29: ffff00000b85be30 x28: 0000000000000000 [ 1348.208868] x27: ffff00000b6cb918 x26: ffff80003b990638 [ 1348.214176] x25: ffff0000087b1a20 x24: ffff80003b94f800 [ 1348.219483] x23: ffff000008e620c8 x22: ffff000008f0b660 [ 1348.224790] x21: ffff000008c6a858 x20: 00000000fffffe00 [ 1348.230097] x19: ffff80003b94f800 x18: 0000000000000001 [ 1348.235404] x17: 0000ffffab2e8a74 x16: ffff0000080d7de8 [ 1348.240711] x15: 0000000000000000 x14: 0000000000000400 [ 1348.246018] x13: 0000000000000400 x12: 0000000000000001 [ 1348.251324] x11: 00000000000002c4 x10: 0000000000000a10 [ 1348.256631] x9 : ffff00000b85bc40 x8 : ffff80003be11870 [ 1348.261937] x7 : ffff80003dfc7308 x6 : 000000078ff08b55 [ 1348.267243] x5 : 00000139e1058400 x4 : 0000000000000000 [ 1348.272550] x3 : dead000000000100 x2 : 958f2788d6618100 [ 1348.277856] x1 : 00000000fffffe00 x0 : 0000000000000000 Signed-off-by: Michael Trimarchi Acked-by: Arend van Spriel Tested-by: Andy Shevchenko Signed-off-by: Kalle Valo --- drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c index c99a191e8d69..a907d7b065fa 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c @@ -4296,6 +4296,13 @@ void brcmf_sdio_remove(struct brcmf_sdio *bus) brcmf_dbg(TRACE, "Enter\n"); if (bus) { + /* Stop watchdog task */ + if (bus->watchdog_tsk) { + send_sig(SIGTERM, bus->watchdog_tsk, 1); + kthread_stop(bus->watchdog_tsk); + bus->watchdog_tsk = NULL; + } + /* De-register interrupt handler */ brcmf_sdiod_intr_unregister(bus->sdiodev); -- cgit v1.2.3 From 7e58e741c001813c02cab17720835d56398f9ffc Mon Sep 17 00:00:00 2001 From: Ganapathi Bhat Date: Fri, 1 Jun 2018 16:11:19 +0530 Subject: Revert "mwifiex: handle race during mwifiex_usb_disconnect" This reverts commit b817047ae70c0bd67b677b65d0d69d72cd6e9728. We have a better fix for this issue, which will be sent on top of this revert. Signed-off-by: Ganapathi Bhat Signed-off-by: Kalle Valo --- drivers/net/wireless/marvell/mwifiex/usb.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/net/wireless/marvell/mwifiex/usb.c b/drivers/net/wireless/marvell/mwifiex/usb.c index 6e3cf9817730..bc475b83bb15 100644 --- a/drivers/net/wireless/marvell/mwifiex/usb.c +++ b/drivers/net/wireless/marvell/mwifiex/usb.c @@ -644,9 +644,6 @@ static void mwifiex_usb_disconnect(struct usb_interface *intf) MWIFIEX_FUNC_SHUTDOWN); } - if (adapter->workqueue) - flush_workqueue(adapter->workqueue); - mwifiex_usb_free(card); mwifiex_dbg(adapter, FATAL, -- cgit v1.2.3 From f8c095f679625a26efc7bb1b8c4b3c6fcaef4633 Mon Sep 17 00:00:00 2001 From: Ganapathi Bhat Date: Fri, 1 Jun 2018 16:11:20 +0530 Subject: mwifiex: handle race during mwifiex_usb_disconnect Race condition is observed during rmmod of mwifiex_usb: 1. The rmmod thread will call mwifiex_usb_disconnect(), download SHUTDOWN command and do wait_event_interruptible_timeout(), waiting for response. 2. The main thread will handle the response and will do a wake_up_interruptible(), unblocking rmmod thread. 3. On getting unblocked, rmmod thread will make rx_cmd.urb = NULL in mwifiex_usb_free(). 4. The main thread will try to resubmit rx_cmd.urb in mwifiex_usb_submit_rx_urb(), which is NULL. To fix this, move mwifiex_usb_free() from mwifiex_usb_disconnect to mwifiex_unregister_dev(). Function mwifiex_unregister_dev() is called after flushing the command and RX work queues. Suggested-by: Brian Norris Signed-off-by: Ganapathi Bhat Reviewed-by: Brian Norris Signed-off-by: Kalle Valo --- drivers/net/wireless/marvell/mwifiex/usb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/marvell/mwifiex/usb.c b/drivers/net/wireless/marvell/mwifiex/usb.c index bc475b83bb15..88f4c89f89ba 100644 --- a/drivers/net/wireless/marvell/mwifiex/usb.c +++ b/drivers/net/wireless/marvell/mwifiex/usb.c @@ -644,8 +644,6 @@ static void mwifiex_usb_disconnect(struct usb_interface *intf) MWIFIEX_FUNC_SHUTDOWN); } - mwifiex_usb_free(card); - mwifiex_dbg(adapter, FATAL, "%s: removing card\n", __func__); mwifiex_remove_card(adapter); @@ -1353,6 +1351,8 @@ static void mwifiex_unregister_dev(struct mwifiex_adapter *adapter) { struct usb_card_rec *card = (struct usb_card_rec *)adapter->card; + mwifiex_usb_free(card); + mwifiex_usb_cleanup_tx_aggr(adapter); card->adapter = NULL; -- cgit v1.2.3 From 92963318a255fd5df94159767cd4750e55d98cb0 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Sat, 9 Jun 2018 12:10:44 +0200 Subject: mt7601u: remove warning when avg_rssi is zero It turned out that we can run calibration without already received frames with RSSI data. In such case just don't update AGC register and don't print the warning. Fixes: b305a6ab0247 ("mt7601u: use EWMA to calculate avg_rssi") Reported-by: Adam Borowski Signed-off-by: Stanislaw Gruszka Acked-by: Jakub Kicinski Signed-off-by: Kalle Valo --- drivers/net/wireless/mediatek/mt7601u/phy.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/mediatek/mt7601u/phy.c b/drivers/net/wireless/mediatek/mt7601u/phy.c index 9d2f9a776ef1..b804abd464ae 100644 --- a/drivers/net/wireless/mediatek/mt7601u/phy.c +++ b/drivers/net/wireless/mediatek/mt7601u/phy.c @@ -986,13 +986,15 @@ static void mt7601u_agc_tune(struct mt7601u_dev *dev) */ spin_lock_bh(&dev->con_mon_lock); avg_rssi = ewma_rssi_read(&dev->avg_rssi); - WARN_ON_ONCE(avg_rssi == 0); + spin_unlock_bh(&dev->con_mon_lock); + if (avg_rssi == 0) + return; + avg_rssi = -avg_rssi; if (avg_rssi <= -70) val -= 0x20; else if (avg_rssi <= -60) val -= 0x10; - spin_unlock_bh(&dev->con_mon_lock); if (val != mt7601u_bbp_rr(dev, 66)) mt7601u_bbp_wr(dev, 66, val); -- cgit v1.2.3 From 50c678772a0b3f9dc6b04262f27e2c373fe03a4d Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Sun, 24 Jun 2018 20:14:41 +0200 Subject: ASoC: cx20442: Don't ignore regulator_get() errors. In its current shape, the driver just ignores errors returned by regulator_get() at component_probe(). This doesn't hurt on Amstrad Delta board as long as it registers the codec device at late_initcall, when the regulator which depends on basic-mmio-gpio device (probed as late as at dev_initcall) is already available. Otherwise the driver may end up trying to control a codec which is not powered up. Remove that dependency on initialization order by handling the error. If the regulator is not yet available and -ENODEV is returned, convert it to -EPROBE_DEFER to get another chance. Signed-off-by: Janusz Krzysztofik Signed-off-by: Mark Brown --- sound/soc/codecs/cx20442.c | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/cx20442.c b/sound/soc/codecs/cx20442.c index 07dd33b09596..ab174b5114dc 100644 --- a/sound/soc/codecs/cx20442.c +++ b/sound/soc/codecs/cx20442.c @@ -362,8 +362,27 @@ static int cx20442_component_probe(struct snd_soc_component *component) return -ENOMEM; cx20442->por = regulator_get(component->dev, "POR"); - if (IS_ERR(cx20442->por)) - dev_warn(component->dev, "failed to get the regulator"); + if (IS_ERR(cx20442->por)) { + int err = PTR_ERR(cx20442->por); + + dev_warn(component->dev, "failed to get POR supply (%d)", err); + /* + * When running on a non-dt platform and requested regulator + * is not available, regulator_get() never returns + * -EPROBE_DEFER as it is not able to justify if the regulator + * may still appear later. On the other hand, the board can + * still set full constraints flag at late_initcall in order + * to instruct regulator_get() to return a dummy one if + * sufficient. Hence, if we get -ENODEV here, let's convert + * it to -EPROBE_DEFER and wait for the board to decide or + * let Deferred Probe infrastructure handle this error. + */ + if (err == -ENODEV) + err = -EPROBE_DEFER; + kfree(cx20442); + return err; + } + cx20442->tty = NULL; snd_soc_component_set_drvdata(component, cx20442); -- cgit v1.2.3 From 86126b77dcd551ce223e7293bb55854e3df05646 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Mon, 25 Jun 2018 14:00:07 +0200 Subject: xfrm: free skb if nlsk pointer is NULL nlmsg_multicast() always frees the skb, so in case we cannot call it we must do that ourselves. Fixes: 21ee543edc0dea ("xfrm: fix race between netns cleanup and state expire notification") Signed-off-by: Florian Westphal Signed-off-by: Steffen Klassert --- net/xfrm/xfrm_user.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c index 1e50b70ad668..33878e6e0d0a 100644 --- a/net/xfrm/xfrm_user.c +++ b/net/xfrm/xfrm_user.c @@ -1025,10 +1025,12 @@ static inline int xfrm_nlmsg_multicast(struct net *net, struct sk_buff *skb, { struct sock *nlsk = rcu_dereference(net->xfrm.nlsk); - if (nlsk) - return nlmsg_multicast(nlsk, skb, pid, group, GFP_ATOMIC); - else - return -1; + if (!nlsk) { + kfree_skb(skb); + return -EPIPE; + } + + return nlmsg_multicast(nlsk, skb, pid, group, GFP_ATOMIC); } static inline unsigned int xfrm_spdinfo_msgsize(void) -- cgit v1.2.3 From b66c9b911fe6ca188002b342b05c43deab4491a3 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 26 Jun 2018 08:58:35 -0300 Subject: ASoC: soc-utils: Fix unregistration order The unregistration should happen in the opposite order of the registration, so change it accordingly. No real issue has been noticed, but it is good practice to keep the correct unregistration order. Signed-off-by: Fabio Estevam Signed-off-by: Mark Brown --- sound/soc/soc-utils.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/soc-utils.c b/sound/soc/soc-utils.c index 2d9e98bd1530..a863bb3f66c2 100644 --- a/sound/soc/soc-utils.c +++ b/sound/soc/soc-utils.c @@ -381,6 +381,6 @@ int __init snd_soc_util_init(void) void __exit snd_soc_util_exit(void) { - platform_device_unregister(soc_dummy_dev); platform_driver_unregister(&soc_dummy_driver); + platform_device_unregister(soc_dummy_dev); } -- cgit v1.2.3 From c486a185744c593417a126aebb119771c1bbe670 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Tue, 26 Jun 2018 10:20:05 +0100 Subject: ASoC: q6adm: dt-bindings: add compatible string to routing Add compatible string to routing so that it can support DT based module autoloading. Signed-off-by: Srinivas Kandagatla Acked-by: Niklas Cassel Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/qcom,q6adm.txt | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/Documentation/devicetree/bindings/sound/qcom,q6adm.txt b/Documentation/devicetree/bindings/sound/qcom,q6adm.txt index cb709e5dbc44..bbae426cdfb1 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6adm.txt +++ b/Documentation/devicetree/bindings/sound/qcom,q6adm.txt @@ -18,6 +18,11 @@ used by the apr service device. = ADM routing "routing" subnode of the ADM node represents adm routing specific configuration +- compatible: + Usage: required + Value type: + Definition: must be "qcom,q6adm-routing". + - #sound-dai-cells Usage: required Value type: @@ -28,6 +33,7 @@ q6adm@8 { compatible = "qcom,q6adm"; reg = ; q6routing: routing { + compatible = "qcom,q6adm-routing"; #sound-dai-cells = <0>; }; }; -- cgit v1.2.3 From 9618b706672db1b595c7076389a833078335417c Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Tue, 26 Jun 2018 10:20:06 +0100 Subject: ASoC: q6asm: dt-bindings: add compatible string to dais Add compatible string to dais so that it can support DT based module autoloading. Signed-off-by: Srinivas Kandagatla Acked-by: Niklas Cassel Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/qcom,q6asm.txt | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/Documentation/devicetree/bindings/sound/qcom,q6asm.txt b/Documentation/devicetree/bindings/sound/qcom,q6asm.txt index 2178eb91146f..f9c7bd8c1bc0 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6asm.txt +++ b/Documentation/devicetree/bindings/sound/qcom,q6asm.txt @@ -17,6 +17,11 @@ used by the apr service device. = ASM DAIs (Digial Audio Interface) "dais" subnode of the ASM node represents dai specific configuration +- compatible: + Usage: required + Value type: + Definition: must be "qcom,q6asm-dais". + - #sound-dai-cells Usage: required Value type: @@ -28,6 +33,7 @@ q6asm@7 { compatible = "qcom,q6asm"; reg = ; q6asmdai: dais { + compatible = "qcom,q6asm-dais"; #sound-dai-cells = <1>; }; }; -- cgit v1.2.3 From e43792c6e5027ad3f0280f5a2e6952b0d436b19b Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Tue, 26 Jun 2018 10:20:07 +0100 Subject: ASoC: q6afe: dt-bindings: add compatible string to dais Add compatible string to dais so that it can support DT based module autoloading. Signed-off-by: Srinivas Kandagatla Acked-by: Niklas Cassel Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/qcom,q6afe.txt | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt index bdbf87df8c0b..a8179409c194 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6afe.txt +++ b/Documentation/devicetree/bindings/sound/qcom,q6afe.txt @@ -17,6 +17,11 @@ used by all apr services. Must contain the following properties. subnode of "dais" representing board specific dai setup. "dais" node should have following properties followed by dai children. +- compatible: + Usage: required + Value type: + Definition: must be "qcom,q6afe-dais" + - #sound-dai-cells Usage: required Value type: @@ -100,6 +105,7 @@ q6afe@4 { reg = ; dais { + compatible = "qcom,q6afe-dais"; #sound-dai-cells = <1>; #address-cells = <1>; #size-cells = <0>; -- cgit v1.2.3 From f614c9b070ed149bbaac4edefb2b5fcb7755c4b0 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Tue, 26 Jun 2018 10:20:08 +0100 Subject: ASoC: qdsp6: q6adm: use of_platform_populate/depopulate() Now that the child nodes have there own compatible strings, Use of_platform_populate/depopulate() instead of less common of_platform_device_create()/destroy(). Signed-off-by: Srinivas Kandagatla Acked-by: Niklas Cassel Signed-off-by: Mark Brown --- sound/soc/qcom/qdsp6/q6adm.c | 16 ++-------------- 1 file changed, 2 insertions(+), 14 deletions(-) diff --git a/sound/soc/qcom/qdsp6/q6adm.c b/sound/soc/qcom/qdsp6/q6adm.c index 9983c665a941..932c3ebfd252 100644 --- a/sound/soc/qcom/qdsp6/q6adm.c +++ b/sound/soc/qcom/qdsp6/q6adm.c @@ -64,7 +64,6 @@ struct q6adm { struct aprv2_ibasic_rsp_result_t result; struct mutex lock; wait_queue_head_t matrix_map_wait; - struct platform_device *pdev_routing; }; struct q6adm_cmd_device_open_v5 { @@ -588,7 +587,6 @@ EXPORT_SYMBOL_GPL(q6adm_close); static int q6adm_probe(struct apr_device *adev) { struct device *dev = &adev->dev; - struct device_node *dais_np; struct q6adm *adm; adm = devm_kzalloc(&adev->dev, sizeof(*adm), GFP_KERNEL); @@ -605,22 +603,12 @@ static int q6adm_probe(struct apr_device *adev) INIT_LIST_HEAD(&adm->copps_list); spin_lock_init(&adm->copps_list_lock); - dais_np = of_get_child_by_name(dev->of_node, "routing"); - if (dais_np) { - adm->pdev_routing = of_platform_device_create(dais_np, - "q6routing", dev); - of_node_put(dais_np); - } - - return 0; + return of_platform_populate(dev->of_node, NULL, NULL, dev); } static int q6adm_remove(struct apr_device *adev) { - struct q6adm *adm = dev_get_drvdata(&adev->dev); - - if (adm->pdev_routing) - of_platform_device_destroy(&adm->pdev_routing->dev, NULL); + of_platform_depopulate(&adev->dev); return 0; } -- cgit v1.2.3 From 4aac7e2773030d667491fbb6d97c9f467fdcbc05 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Tue, 26 Jun 2018 10:20:09 +0100 Subject: ASoC: qdsp6: q6asm: use of_platform_populate/depopulate() Now that the child nodes have there own compatible strings, Use of_platform_populate/depopulate() instead of less common of_platform_device_create()/destroy(). Signed-off-by: Srinivas Kandagatla Acked-by: Niklas Cassel Signed-off-by: Mark Brown --- sound/soc/qcom/qdsp6/q6asm.c | 16 ++-------------- 1 file changed, 2 insertions(+), 14 deletions(-) diff --git a/sound/soc/qcom/qdsp6/q6asm.c b/sound/soc/qcom/qdsp6/q6asm.c index 530852385cad..c4fd28f168d5 100644 --- a/sound/soc/qcom/qdsp6/q6asm.c +++ b/sound/soc/qcom/qdsp6/q6asm.c @@ -177,7 +177,6 @@ struct q6asm { struct platform_device *pcmdev; spinlock_t slock; struct audio_client *session[MAX_SESSIONS + 1]; - struct platform_device *pdev_dais; }; struct audio_client { @@ -1344,7 +1343,6 @@ EXPORT_SYMBOL_GPL(q6asm_cmd_nowait); static int q6asm_probe(struct apr_device *adev) { struct device *dev = &adev->dev; - struct device_node *dais_np; struct q6asm *q6asm; q6asm = devm_kzalloc(dev, sizeof(*q6asm), GFP_KERNEL); @@ -1359,22 +1357,12 @@ static int q6asm_probe(struct apr_device *adev) spin_lock_init(&q6asm->slock); dev_set_drvdata(dev, q6asm); - dais_np = of_get_child_by_name(dev->of_node, "dais"); - if (dais_np) { - q6asm->pdev_dais = of_platform_device_create(dais_np, - "q6asm-dai", dev); - of_node_put(dais_np); - } - - return 0; + return of_platform_populate(dev->of_node, NULL, NULL, dev); } static int q6asm_remove(struct apr_device *adev) { - struct q6asm *q6asm = dev_get_drvdata(&adev->dev); - - if (q6asm->pdev_dais) - of_platform_device_destroy(&q6asm->pdev_dais->dev, NULL); + of_platform_depopulate(&adev->dev); return 0; } -- cgit v1.2.3 From 01afbd45f78cb0557db18c3ba768eea3e9576cfd Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Tue, 26 Jun 2018 10:20:10 +0100 Subject: ASoC: qdsp6: q6afe: use of_platform_populate/depopulate() Now that the child nodes have there own compatible strings, Use of_platform_populate/depopulate() instead of less common of_platform_device_create()/destroy(). Signed-off-by: Srinivas Kandagatla Acked-by: Niklas Cassel Signed-off-by: Mark Brown --- sound/soc/qcom/qdsp6/q6afe.c | 16 ++-------------- 1 file changed, 2 insertions(+), 14 deletions(-) diff --git a/sound/soc/qcom/qdsp6/q6afe.c b/sound/soc/qcom/qdsp6/q6afe.c index 01f43218984b..621b67b34db9 100644 --- a/sound/soc/qcom/qdsp6/q6afe.c +++ b/sound/soc/qcom/qdsp6/q6afe.c @@ -316,7 +316,6 @@ struct q6afe { struct mutex lock; struct list_head port_list; spinlock_t port_list_lock; - struct platform_device *pdev_dais; }; struct afe_port_cmd_device_start { @@ -1438,7 +1437,6 @@ static int q6afe_probe(struct apr_device *adev) { struct q6afe *afe; struct device *dev = &adev->dev; - struct device_node *dais_np; afe = devm_kzalloc(dev, sizeof(*afe), GFP_KERNEL); if (!afe) @@ -1453,22 +1451,12 @@ static int q6afe_probe(struct apr_device *adev) dev_set_drvdata(dev, afe); - dais_np = of_get_child_by_name(dev->of_node, "dais"); - if (dais_np) { - afe->pdev_dais = of_platform_device_create(dais_np, - "q6afe-dai", dev); - of_node_put(dais_np); - } - - return 0; + return of_platform_populate(dev->of_node, NULL, NULL, dev); } static int q6afe_remove(struct apr_device *adev) { - struct q6afe *afe = dev_get_drvdata(&adev->dev); - - if (afe->pdev_dais) - of_platform_device_destroy(&afe->pdev_dais->dev, NULL); + of_platform_depopulate(&adev->dev); return 0; } -- cgit v1.2.3 From eb7cc9be6e9ce17e69252a6fc00e75a5b08201ab Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Tue, 26 Jun 2018 10:20:11 +0100 Subject: ASoC: qdsp6: q6afe-dai: support dt based module loading This patch uses new compatible string to make DT based module loading work. Signed-off-by: Srinivas Kandagatla Acked-by: Niklas Cassel Signed-off-by: Mark Brown --- sound/soc/qcom/qdsp6/q6afe-dai.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/sound/soc/qcom/qdsp6/q6afe-dai.c b/sound/soc/qcom/qdsp6/q6afe-dai.c index 5002dd05bf27..1d2e5013c121 100644 --- a/sound/soc/qcom/qdsp6/q6afe-dai.c +++ b/sound/soc/qcom/qdsp6/q6afe-dai.c @@ -1290,9 +1290,16 @@ static int q6afe_dai_dev_remove(struct platform_device *pdev) return 0; } +static const struct of_device_id q6afe_dai_device_id[] = { + { .compatible = "qcom,q6afe-dais" }, + {}, +}; +MODULE_DEVICE_TABLE(of, q6afe_dai_device_id); + static struct platform_driver q6afe_dai_platform_driver = { .driver = { .name = "q6afe-dai", + .of_match_table = of_match_ptr(q6afe_dai_device_id), }, .probe = q6afe_dai_dev_probe, .remove = q6afe_dai_dev_remove, -- cgit v1.2.3 From 1ce09ef36fb190fa207fdb3e31fc1c8caa292125 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Tue, 26 Jun 2018 10:20:12 +0100 Subject: ASoC: qdsp6: q6asm-dai: support dt based module loading This patch uses new compatible string to make DT based module loading work. Signed-off-by: Srinivas Kandagatla Acked-by: Niklas Cassel Signed-off-by: Mark Brown --- sound/soc/qcom/qdsp6/q6asm-dai.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/sound/soc/qcom/qdsp6/q6asm-dai.c b/sound/soc/qcom/qdsp6/q6asm-dai.c index 349c6a883c63..1196dc7483d2 100644 --- a/sound/soc/qcom/qdsp6/q6asm-dai.c +++ b/sound/soc/qcom/qdsp6/q6asm-dai.c @@ -611,9 +611,16 @@ static int q6asm_dai_dev_remove(struct platform_device *pdev) return 0; } +static const struct of_device_id q6asm_dai_device_id[] = { + { .compatible = "qcom,q6asm-dais" }, + {}, +}; +MODULE_DEVICE_TABLE(of, q6asm_dai_device_id); + static struct platform_driver q6asm_dai_platform_driver = { .driver = { .name = "q6asm-dai", + .of_match_table = of_match_ptr(q6asm_dai_device_id), }, .probe = q6asm_dai_probe, .remove = q6asm_dai_dev_remove, -- cgit v1.2.3 From f48bde4bfbcf434d6aef604c1c50d68b12a4bc45 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Tue, 26 Jun 2018 10:20:13 +0100 Subject: ASoC: qdsp6: q6routing: support dt based module loading This patch uses new compatible string to make DT based module loading work. Signed-off-by: Srinivas Kandagatla Acked-by: Niklas Cassel Signed-off-by: Mark Brown --- sound/soc/qcom/qdsp6/q6routing.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/sound/soc/qcom/qdsp6/q6routing.c b/sound/soc/qcom/qdsp6/q6routing.c index 593f66b8622f..ab696bf8d1d3 100644 --- a/sound/soc/qcom/qdsp6/q6routing.c +++ b/sound/soc/qcom/qdsp6/q6routing.c @@ -993,9 +993,16 @@ static int q6pcm_routing_remove(struct platform_device *pdev) return 0; } +static const struct of_device_id q6pcm_routing_device_id[] = { + { .compatible = "qcom,q6adm-routing" }, + {}, +}; +MODULE_DEVICE_TABLE(of, q6pcm_routing_device_id); + static struct platform_driver q6pcm_routing_platform_driver = { .driver = { .name = "q6routing", + .of_match_table = of_match_ptr(q6pcm_routing_device_id), }, .probe = q6pcm_routing_probe, .remove = q6pcm_routing_remove, -- cgit v1.2.3 From 2d12c20b98ad610892151da37367f2d018181455 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Tue, 26 Jun 2018 10:20:14 +0100 Subject: ASoC: qcom: apq8096: remove redundant owner assignment module owner is already set in platform_driver_register(), so remove this redundant assignment. Signed-off-by: Srinivas Kandagatla Acked-by: Niklas Cassel Signed-off-by: Mark Brown --- sound/soc/qcom/apq8096.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/soc/qcom/apq8096.c b/sound/soc/qcom/apq8096.c index 239b8cb77bdb..cab8c4ff7c00 100644 --- a/sound/soc/qcom/apq8096.c +++ b/sound/soc/qcom/apq8096.c @@ -246,7 +246,6 @@ static struct platform_driver msm_snd_apq8096_driver = { .remove = apq8096_platform_remove, .driver = { .name = "msm-snd-apq8096", - .owner = THIS_MODULE, .of_match_table = msm_snd_apq8096_dt_match, }, }; -- cgit v1.2.3 From 972562f7aaaa261ec6e1ac14fed0c5bdd0dfb1cb Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Tue, 26 Jun 2018 10:20:15 +0100 Subject: ASoC: qdsp6: q6routing: add proper error check q6adm_open can return error pointer or a null in error cases. Fix the return handling. Signed-off-by: Srinivas Kandagatla Acked-by: Niklas Cassel Signed-off-by: Mark Brown --- sound/soc/qcom/qdsp6/q6routing.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/qcom/qdsp6/q6routing.c b/sound/soc/qcom/qdsp6/q6routing.c index ab696bf8d1d3..c80fdbc2442e 100644 --- a/sound/soc/qcom/qdsp6/q6routing.c +++ b/sound/soc/qcom/qdsp6/q6routing.c @@ -310,7 +310,7 @@ int q6routing_stream_open(int fedai_id, int perf_mode, session->channels, topology, perf_mode, session->bits_per_sample, 0, 0); - if (!copp) { + if (IS_ERR_OR_NULL(copp)) { mutex_unlock(&routing_data->lock); return -EINVAL; } -- cgit v1.2.3 From f339155a4063cf3177bb38f6e83760951148e86b Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Tue, 26 Jun 2018 10:20:16 +0100 Subject: ASoC: qdsp6: q6asm: remove unused struct q6asm member pcmdev in struct q6asm seems be left over and unused, so just remove it. Signed-off-by: Srinivas Kandagatla Acked-by: Niklas Cassel Signed-off-by: Mark Brown --- sound/soc/qcom/qdsp6/q6asm.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/soc/qcom/qdsp6/q6asm.c b/sound/soc/qcom/qdsp6/q6asm.c index c4fd28f168d5..2b2c7233bb5f 100644 --- a/sound/soc/qcom/qdsp6/q6asm.c +++ b/sound/soc/qcom/qdsp6/q6asm.c @@ -174,7 +174,6 @@ struct q6asm { struct device *dev; struct q6core_svc_api_info ainfo; wait_queue_head_t mem_wait; - struct platform_device *pcmdev; spinlock_t slock; struct audio_client *session[MAX_SESSIONS + 1]; }; -- cgit v1.2.3 From 2c772068fc1e93638702dd7b79eed9eaca0a1cd9 Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Wed, 6 Jun 2018 17:39:42 +0200 Subject: Documentation: devicetree: tilcdc: fix spelling mistake "suppors" -> "supports" Trivial fix to spelling mistake in tilcdc.txt devicetree documentation. Signed-off-by: Enric Balletbo i Serra Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt b/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt index 6fddb4f4f71a..3055d5c2c04e 100644 --- a/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt +++ b/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt @@ -36,7 +36,7 @@ Optional nodes: - port/ports: to describe a connection to an external encoder. The binding follows Documentation/devicetree/bindings/graph.txt and - suppors a single port with a single endpoint. + supports a single port with a single endpoint. - See also Documentation/devicetree/bindings/display/tilcdc/panel.txt and Documentation/devicetree/bindings/display/tilcdc/tfp410.txt for connecting -- cgit v1.2.3 From e88d133d6229de49cce1f8bc11455e93b6f9b837 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 20 Jun 2018 15:47:26 -0300 Subject: dt-bindings: w1-gpio: Remove unneeded unit address Remove unneeded unit address from onewire node, so that dtc does not complain that unit address is present without a corresponding reg entry, when such use is made on a real dts file. Signed-off-by: Fabio Estevam Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/w1/w1-gpio.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/w1/w1-gpio.txt b/Documentation/devicetree/bindings/w1/w1-gpio.txt index 6e09c35d9f1a..37091902a021 100644 --- a/Documentation/devicetree/bindings/w1/w1-gpio.txt +++ b/Documentation/devicetree/bindings/w1/w1-gpio.txt @@ -15,7 +15,7 @@ Optional properties: Examples: - onewire@0 { + onewire { compatible = "w1-gpio"; gpios = <&gpio 126 0>, <&gpio 105 0>; }; -- cgit v1.2.3 From 5bfabc0aabe64a5fccc7afa6e5a9cc4443d8898b Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Wed, 13 Jun 2018 10:50:11 -0700 Subject: dt-bindings: soc: qcom: Fix default clock-freq for qcom,geni-i2c In an early version of the I2C patch that was posted to the list the default I2C frequency (if none was specified) was 400 kHz. There was debate on the list and we decided that it would be more consistent with the rest of i2c if we defaulted to 100 kHz. ...but we never updated the bindings. Let's fix this. NOTE: since the i2c driver itself hasn't actually landed yet and the SoC here is very new it seems terribly unlikely that anyone was relying on the old 400 kHz number, so I'll assume this is an OK "incompatible" device tree change. Signed-off-by: Douglas Anderson Reviewed-by: Bjorn Andersson Acked-by: Wolfram Sang Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt index d330c73de9a2..68b7d6207e3d 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt @@ -39,7 +39,7 @@ Required properties: Optional property: - clock-frequency: Desired I2C bus clock frequency in Hz. - When missing default to 400000Hz. + When missing default to 100000Hz. Child nodes should conform to I2C bus binding as described in i2c.txt. -- cgit v1.2.3 From a47c9b3943164453d4f580ea174a6ddcb37554c3 Mon Sep 17 00:00:00 2001 From: Jonathan Neuschäfer Date: Sun, 17 Jun 2018 16:31:18 +0200 Subject: dt-bindings: Fix unbalanced quotation marks MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Multiple binding documents have various forms of unbalanced quotation marks. Fix them. Signed-off-by: Jonathan Neuschäfer Acked-by: Krzysztof Kozlowski Acked-by: Jon Hunter Acked-by: Srinivas Kandagatla Acked-by: Dmitry Torokhov Acked-by: Florian Fainelli Signed-off-by: Rob Herring --- Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt | 2 +- Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt | 2 +- Documentation/devicetree/bindings/input/touchscreen/hideep.txt | 2 +- .../devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt | 2 +- .../devicetree/bindings/interrupt-controller/st,stm32-exti.txt | 2 +- Documentation/devicetree/bindings/mips/brcm/soc.txt | 2 +- Documentation/devicetree/bindings/net/fsl-fman.txt | 2 +- Documentation/devicetree/bindings/power/power_domain.txt | 2 +- Documentation/devicetree/bindings/regulator/tps65090.txt | 2 +- Documentation/devicetree/bindings/reset/st,sti-softreset.txt | 2 +- Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt | 2 +- Documentation/devicetree/bindings/sound/qcom,apq8096.txt | 2 +- 12 files changed, 12 insertions(+), 12 deletions(-) diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt index bdadc3da9556..6970f30a3770 100644 --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt @@ -66,7 +66,7 @@ Required root node properties: - "insignal,arndale-octa" - for Exynos5420-based Insignal Arndale Octa board. - "insignal,origen" - for Exynos4210-based Insignal Origen board. - - "insignal,origen4412 - for Exynos4412-based Insignal Origen board. + - "insignal,origen4412" - for Exynos4412-based Insignal Origen board. Optional nodes: diff --git a/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt b/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt index 20fc72d9e61e..45a61b462287 100644 --- a/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt +++ b/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt @@ -1,7 +1,7 @@ Nintendo Wii (Hollywood) GPIO controller Required properties: -- compatible: "nintendo,hollywood-gpio +- compatible: "nintendo,hollywood-gpio" - reg: Physical base address and length of the controller's registers. - gpio-controller: Marks the device node as a GPIO controller. - #gpio-cells: Should be <2>. The first cell is the pin number and the diff --git a/Documentation/devicetree/bindings/input/touchscreen/hideep.txt b/Documentation/devicetree/bindings/input/touchscreen/hideep.txt index 121d9b7c79a2..1063c30d53f7 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/hideep.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/hideep.txt @@ -32,7 +32,7 @@ i2c@00000000 { reg = <0x6c>; interrupt-parent = <&gpx1>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; - vdd-supply = <&ldo15_reg>"; + vdd-supply = <&ldo15_reg>; vid-supply = <&ldo18_reg>; reset-gpios = <&gpx1 5 0>; touchscreen-size-x = <1080>; diff --git a/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt b/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt index 1099fe0788fa..f246ccbf8838 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt @@ -15,7 +15,7 @@ Required properties: include "nvidia,tegra30-ictlr". - reg : Specifies base physical address and size of the registers. Each controller must be described separately (Tegra20 has 4 of them, - whereas Tegra30 and later have 5" + whereas Tegra30 and later have 5). - interrupt-controller : Identifies the node as an interrupt controller. - #interrupt-cells : Specifies the number of cells needed to encode an interrupt source. The value must be 3. diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt index 136bd612bd83..6a36bf66d932 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt @@ -12,7 +12,7 @@ Required properties: specifier, shall be 2 - interrupts: interrupts references to primary interrupt controller (only needed for exti controller with multiple exti under - same parent interrupt: st,stm32-exti and st,stm32h7-exti") + same parent interrupt: st,stm32-exti and st,stm32h7-exti) Example: diff --git a/Documentation/devicetree/bindings/mips/brcm/soc.txt b/Documentation/devicetree/bindings/mips/brcm/soc.txt index 356c29789cf5..3a66d3c483e1 100644 --- a/Documentation/devicetree/bindings/mips/brcm/soc.txt +++ b/Documentation/devicetree/bindings/mips/brcm/soc.txt @@ -152,7 +152,7 @@ Required properties: - compatible : should contain one of: "brcm,bcm7425-timers" "brcm,bcm7429-timers" - "brcm,bcm7435-timers and + "brcm,bcm7435-timers" and "brcm,brcmstb-timers" - reg : the timers register range - interrupts : the interrupt line for this timer block diff --git a/Documentation/devicetree/bindings/net/fsl-fman.txt b/Documentation/devicetree/bindings/net/fsl-fman.txt index df873d1f3b7c..f8c33890bc29 100644 --- a/Documentation/devicetree/bindings/net/fsl-fman.txt +++ b/Documentation/devicetree/bindings/net/fsl-fman.txt @@ -238,7 +238,7 @@ PROPERTIES Must include one of the following: - "fsl,fman-dtsec" for dTSEC MAC - "fsl,fman-xgec" for XGEC MAC - - "fsl,fman-memac for mEMAC MAC + - "fsl,fman-memac" for mEMAC MAC - cell-index Usage: required diff --git a/Documentation/devicetree/bindings/power/power_domain.txt b/Documentation/devicetree/bindings/power/power_domain.txt index 9b387f861aed..7dec508987c7 100644 --- a/Documentation/devicetree/bindings/power/power_domain.txt +++ b/Documentation/devicetree/bindings/power/power_domain.txt @@ -133,7 +133,7 @@ located inside a PM domain with index 0 of a power controller represented by a node with the label "power". In the second example the consumer device are partitioned across two PM domains, the first with index 0 and the second with index 1, of a power controller that -is represented by a node with the label "power. +is represented by a node with the label "power". Optional properties: - required-opps: This contains phandle to an OPP node in another device's OPP diff --git a/Documentation/devicetree/bindings/regulator/tps65090.txt b/Documentation/devicetree/bindings/regulator/tps65090.txt index ca69f5e3040c..ae326f263597 100644 --- a/Documentation/devicetree/bindings/regulator/tps65090.txt +++ b/Documentation/devicetree/bindings/regulator/tps65090.txt @@ -16,7 +16,7 @@ Required properties: Optional properties: - ti,enable-ext-control: This is applicable for DCDC1, DCDC2 and DCDC3. If DCDCs are externally controlled then this property should be there. -- "dcdc-ext-control-gpios: This is applicable for DCDC1, DCDC2 and DCDC3. +- dcdc-ext-control-gpios: This is applicable for DCDC1, DCDC2 and DCDC3. If DCDCs are externally controlled and if it is from GPIO then GPIO number should be provided. If it is externally controlled and no GPIO entry then driver will just configure this rails as external control diff --git a/Documentation/devicetree/bindings/reset/st,sti-softreset.txt b/Documentation/devicetree/bindings/reset/st,sti-softreset.txt index a21658f18fe6..3661e6153a92 100644 --- a/Documentation/devicetree/bindings/reset/st,sti-softreset.txt +++ b/Documentation/devicetree/bindings/reset/st,sti-softreset.txt @@ -15,7 +15,7 @@ Please refer to reset.txt in this directory for common reset controller binding usage. Required properties: -- compatible: Should be st,stih407-softreset"; +- compatible: Should be "st,stih407-softreset"; - #reset-cells: 1, see below example: diff --git a/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt b/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt index 6a4aadc4ce06..84b28dbe9f15 100644 --- a/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt +++ b/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt @@ -30,7 +30,7 @@ Required properties: Board connectors: * Headset Mic - * Secondary Mic", + * Secondary Mic * DMIC * Ext Spk diff --git a/Documentation/devicetree/bindings/sound/qcom,apq8096.txt b/Documentation/devicetree/bindings/sound/qcom,apq8096.txt index aa54e49fc8a2..c7600a93ab39 100644 --- a/Documentation/devicetree/bindings/sound/qcom,apq8096.txt +++ b/Documentation/devicetree/bindings/sound/qcom,apq8096.txt @@ -35,7 +35,7 @@ This binding describes the APQ8096 sound card, which uses qdsp for audio. "Digital Mic3" Audio pins and MicBias on WCD9335 Codec: - "MIC_BIAS1 + "MIC_BIAS1" "MIC_BIAS2" "MIC_BIAS3" "MIC_BIAS4" -- cgit v1.2.3 From fc7c460fbb4003bf3f5d2b435079c85888644663 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 24 Jun 2018 16:06:26 +0200 Subject: ASoC: Intel: bytcr_rt5651: Add BYT_RT5651_DEFAULT_QUIRKS define Almost all boards use the mclk and use the same jack-detect settings, add a BYT_RT5651_DEFAULT_QUIRKS define for this. This shaves of some lines and makes it easier to see which settings are unique to a certain model. Signed-off-by: Hans de Goede Reviewed-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- sound/soc/intel/boards/bytcr_rt5651.c | 25 +++++++++---------------- 1 file changed, 9 insertions(+), 16 deletions(-) diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c index 987720e203f9..735b8312e275 100644 --- a/sound/soc/intel/boards/bytcr_rt5651.c +++ b/sound/soc/intel/boards/bytcr_rt5651.c @@ -77,6 +77,11 @@ enum { #define BYT_RT5651_SSP0_AIF1 BIT(20) #define BYT_RT5651_SSP0_AIF2 BIT(21) +#define BYT_RT5651_DEFAULT_QUIRKS (BYT_RT5651_MCLK_EN | \ + BYT_RT5651_JD1_1 | \ + BYT_RT5651_OVCD_TH_2000UA | \ + BYT_RT5651_OVCD_SF_0P75) + /* jack-detect-source + dmic-en + ovcd-th + -sf + terminating empty entry */ #define MAX_NO_PROPS 5 @@ -86,10 +91,7 @@ struct byt_rt5651_private { }; /* Default: jack-detect on JD1_1, internal mic on in2, headsetmic on in3 */ -static unsigned long byt_rt5651_quirk = BYT_RT5651_MCLK_EN | - BYT_RT5651_JD1_1 | - BYT_RT5651_OVCD_TH_2000UA | - BYT_RT5651_OVCD_SF_0P75 | +static unsigned long byt_rt5651_quirk = BYT_RT5651_DEFAULT_QUIRKS | BYT_RT5651_IN2_HS_IN3_MAP; static void log_quirks(struct device *dev) @@ -379,10 +381,7 @@ static const struct dmi_system_id byt_rt5651_quirk_table[] = { DMI_MATCH(DMI_SYS_VENDOR, "KIANO"), DMI_MATCH(DMI_PRODUCT_NAME, "KIANO SlimNote 14.2"), }, - .driver_data = (void *)(BYT_RT5651_MCLK_EN | - BYT_RT5651_JD1_1 | - BYT_RT5651_OVCD_TH_2000UA | - BYT_RT5651_OVCD_SF_0P75 | + .driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS | BYT_RT5651_IN1_IN2_MAP), }, { @@ -392,10 +391,7 @@ static const struct dmi_system_id byt_rt5651_quirk_table[] = { DMI_MATCH(DMI_SYS_VENDOR, "Hampoo"), DMI_MATCH(DMI_PRODUCT_NAME, "D2D3_Vi8A1"), }, - .driver_data = (void *)(BYT_RT5651_MCLK_EN | - BYT_RT5651_JD1_1 | - BYT_RT5651_OVCD_TH_2000UA | - BYT_RT5651_OVCD_SF_0P75 | + .driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS | BYT_RT5651_IN2_HS_IN3_MAP), }, { @@ -405,10 +401,7 @@ static const struct dmi_system_id byt_rt5651_quirk_table[] = { DMI_MATCH(DMI_SYS_VENDOR, "VIOS"), DMI_MATCH(DMI_PRODUCT_NAME, "LTH17"), }, - .driver_data = (void *)(BYT_RT5651_MCLK_EN | - BYT_RT5651_JD1_1 | - BYT_RT5651_OVCD_TH_2000UA | - BYT_RT5651_OVCD_SF_1P0 | + .driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS | BYT_RT5651_IN1_IN2_MAP), }, {} -- cgit v1.2.3 From 10876d24eb40c6bfaa0aabd97e3e143258176c53 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 24 Jun 2018 16:06:27 +0200 Subject: ASoC: Intel: bytcr_rt5651: Change default input map from in2 to in1 Further testing on all 6 model x86 tablets with a rt5651 which I have access to for testing has shown that their single (mono) microphone is connected to both IN1 *and* IN2. The previous default mapping of IN2 was based on testing on the same 6 tablets, where the internal mic works fine with a mapping of IN2. But it works fine too with a mapping of IN1. This commit changes the default input mapping to to use IN1 instead of IN2, to match the mapping used for the other mono devices in the DMI quirk table. So that we need less different mappings. The same change is made to the Chuwi Vi8 Plus quirks, which is one of the 6 models tested. This is a preparation patch for simplifying the maps in a follow-up commit. Signed-off-by: Hans de Goede Reviewed-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- sound/soc/intel/boards/bytcr_rt5651.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c index 735b8312e275..910890de38b0 100644 --- a/sound/soc/intel/boards/bytcr_rt5651.c +++ b/sound/soc/intel/boards/bytcr_rt5651.c @@ -90,9 +90,9 @@ struct byt_rt5651_private { struct snd_soc_jack jack; }; -/* Default: jack-detect on JD1_1, internal mic on in2, headsetmic on in3 */ +/* Default: jack-detect on JD1_1, internal mic on in1, headsetmic on in3 */ static unsigned long byt_rt5651_quirk = BYT_RT5651_DEFAULT_QUIRKS | - BYT_RT5651_IN2_HS_IN3_MAP; + BYT_RT5651_IN1_HS_IN3_MAP; static void log_quirks(struct device *dev) { @@ -392,7 +392,7 @@ static const struct dmi_system_id byt_rt5651_quirk_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "D2D3_Vi8A1"), }, .driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS | - BYT_RT5651_IN2_HS_IN3_MAP), + BYT_RT5651_IN1_HS_IN3_MAP), }, { /* VIOS LTH17 */ -- cgit v1.2.3 From 366780df3e2d40533cc95a4bf25ddd3b934b5fd3 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 24 Jun 2018 16:06:28 +0200 Subject: ASoC: Intel: bytcr_rt5651: Fix IN1_IN2_MAP quirk not being logged Fix the quirk logging code not logging the IN1_IN2_MAP quirk. Signed-off-by: Hans de Goede Reviewed-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- sound/soc/intel/boards/bytcr_rt5651.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c index 910890de38b0..7cc6e36b7c47 100644 --- a/sound/soc/intel/boards/bytcr_rt5651.c +++ b/sound/soc/intel/boards/bytcr_rt5651.c @@ -102,6 +102,8 @@ static void log_quirks(struct device *dev) dev_info(dev, "quirk IN1_MAP enabled"); if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN2_MAP) dev_info(dev, "quirk IN2_MAP enabled"); + if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN1_IN2_MAP) + dev_info(dev, "quirk IN1_IN2_MAP enabled"); if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN1_HS_IN3_MAP) dev_info(dev, "quirk IN1_HS_IN3_MAP enabled"); if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN2_HS_IN3_MAP) -- cgit v1.2.3 From fcdf1391caa6f7f01de56eea63e070555771fac7 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 24 Jun 2018 16:06:29 +0200 Subject: ASoC: Intel: bytcr_rt5651: Remove IN2 input mappings BYT_RT5651_IN2_MAP was introduced in commit 39712db878a4 ("SoC: intel: byt: Introduce new custom IN2 map"), uses in commit 2fe30129b0a6 ("ASoC: intel: byt: Enable IN2 map quirk for a KIANO laptop"), only to be replaced by a new BYT_RT5651_IN1_IN2_MAP quirk in commit ea261bd02a67 ("ASoC: intel: byt: Introduce new map for dual mics") quickly afterwards, because the KIANO laptop has 2 internal mics on IN1 and IN2 and the headset mic is not in IN1 where the BYT_RT5651_IN2_MAP maps it, but on IN3. Now that the KIANO quirk entry uses BYT_RT5651_IN1_IN2_MAP, there are no users of BYT_RT5651_IN2_MAP left. This makes sense since the headset mic seems to always be connected to IN3, so BYT_RT5651_IN2_MAP is not useful. To deal with BYT_RT5651_IN2_MAP wrongly mapping the headset mic to IN1, BYT_RT5651_IN2_HS_IN3_MAP was added in commit f026e0631780 ("ASoC: Intel: bytcr_rt5651: Add new IN2_HS_IN3 input map and a quirk using it"). This was based on the assumption then some devices have the internal mic connected to IN2 only. Further testing has shown that this is wrong and the internal mic is always connected to IN1 and sometimes to both IN1 and IN2. TL;DR: Both BYT_RT5651_IN2_MAP and BYT_RT5651_IN2_HS_IN3_MAP are based on on wrong assumptions from the past and are no longer useful now, so they can both be removed. Signed-off-by: Hans de Goede Reviewed-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- sound/soc/intel/boards/bytcr_rt5651.c | 30 ++---------------------------- 1 file changed, 2 insertions(+), 28 deletions(-) diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c index 7cc6e36b7c47..b8ca7137d8b2 100644 --- a/sound/soc/intel/boards/bytcr_rt5651.c +++ b/sound/soc/intel/boards/bytcr_rt5651.c @@ -40,10 +40,8 @@ enum { BYT_RT5651_DMIC_MAP, BYT_RT5651_IN1_MAP, - BYT_RT5651_IN2_MAP, BYT_RT5651_IN1_IN2_MAP, BYT_RT5651_IN1_HS_IN3_MAP, - BYT_RT5651_IN2_HS_IN3_MAP, }; enum { @@ -100,14 +98,10 @@ static void log_quirks(struct device *dev) dev_info(dev, "quirk DMIC_MAP enabled"); if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN1_MAP) dev_info(dev, "quirk IN1_MAP enabled"); - if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN2_MAP) - dev_info(dev, "quirk IN2_MAP enabled"); if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN1_IN2_MAP) dev_info(dev, "quirk IN1_IN2_MAP enabled"); if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN1_HS_IN3_MAP) dev_info(dev, "quirk IN1_HS_IN3_MAP enabled"); - if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN2_HS_IN3_MAP) - dev_info(dev, "quirk IN2_HS_IN3_MAP enabled"); if (BYT_RT5651_JDSRC(byt_rt5651_quirk)) { dev_info(dev, "quirk realtek,jack-detect-source %ld\n", BYT_RT5651_JDSRC(byt_rt5651_quirk)); @@ -256,12 +250,6 @@ static const struct snd_soc_dapm_route byt_rt5651_intmic_in1_map[] = { {"IN2P", NULL, "Headset Mic"}, }; -static const struct snd_soc_dapm_route byt_rt5651_intmic_in2_map[] = { - {"Internal Mic", NULL, "micbias1"}, - {"IN1P", NULL, "Headset Mic"}, - {"IN2P", NULL, "Internal Mic"}, -}; - static const struct snd_soc_dapm_route byt_rt5651_intmic_in1_in2_map[] = { {"Internal Mic", NULL, "micbias1"}, {"IN1P", NULL, "Internal Mic"}, @@ -275,12 +263,6 @@ static const struct snd_soc_dapm_route byt_rt5651_intmic_in1_hs_in3_map[] = { {"IN3P", NULL, "Headset Mic"}, }; -static const struct snd_soc_dapm_route byt_rt5651_intmic_in2_hs_in3_map[] = { - {"Internal Mic", NULL, "micbias1"}, - {"IN2P", NULL, "Internal Mic"}, - {"IN3P", NULL, "Headset Mic"}, -}; - static const struct snd_soc_dapm_route byt_rt5651_ssp0_aif1_map[] = { {"ssp0 Tx", NULL, "modem_out"}, {"modem_in", NULL, "ssp0 Rx"}, @@ -462,10 +444,6 @@ static int byt_rt5651_init(struct snd_soc_pcm_runtime *runtime) custom_map = byt_rt5651_intmic_in1_map; num_routes = ARRAY_SIZE(byt_rt5651_intmic_in1_map); break; - case BYT_RT5651_IN2_MAP: - custom_map = byt_rt5651_intmic_in2_map; - num_routes = ARRAY_SIZE(byt_rt5651_intmic_in2_map); - break; case BYT_RT5651_IN1_IN2_MAP: custom_map = byt_rt5651_intmic_in1_in2_map; num_routes = ARRAY_SIZE(byt_rt5651_intmic_in1_in2_map); @@ -474,10 +452,6 @@ static int byt_rt5651_init(struct snd_soc_pcm_runtime *runtime) custom_map = byt_rt5651_intmic_in1_hs_in3_map; num_routes = ARRAY_SIZE(byt_rt5651_intmic_in1_hs_in3_map); break; - case BYT_RT5651_IN2_HS_IN3_MAP: - custom_map = byt_rt5651_intmic_in2_hs_in3_map; - num_routes = ARRAY_SIZE(byt_rt5651_intmic_in2_hs_in3_map); - break; default: custom_map = byt_rt5651_intmic_dmic_map; num_routes = ARRAY_SIZE(byt_rt5651_intmic_dmic_map); @@ -723,9 +697,9 @@ struct acpi_chan_package { /* ACPICA seems to require 64 bit integers */ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev) { const char * const intmic_name[] = - { "dmic", "in1", "in2", "in12", "in1", "in2" }; + { "dmic", "in1", "in12", "in1" }; const char * const hsmic_name[] = - { "in2", "in2", "in1", "in3", "in3", "in3" }; + { "in2", "in2", "in3", "in3" }; struct byt_rt5651_private *priv; struct snd_soc_acpi_mach *mach; const char *i2c_name = NULL; -- cgit v1.2.3 From de23147983013591bc4d6812ce441f351dec6b9d Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 24 Jun 2018 16:06:30 +0200 Subject: ASoC: Intel: bytcr_rt5651: Fix IN1 map headsetmic mapping The initial bytcr_rt5651 machine driver commit mapped IN2 as the headset mic. In retrospect this is not correct as all known boards have the headset mic on IN3. To workaround this special IN?_HS_IN3 mappings were added. This commit fixes the original IN1 mapping to correctly have the headset mic on IN3, moves all users of the IN1_HS_IN3 mapping over to the fixed IN1_MAP and drops the now no longer needed IN1_HS_IN3 mapping. Signed-off-by: Hans de Goede Reviewed-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- sound/soc/intel/boards/bytcr_rt5651.c | 29 +++++++---------------------- 1 file changed, 7 insertions(+), 22 deletions(-) diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c index b8ca7137d8b2..bf2adb36f455 100644 --- a/sound/soc/intel/boards/bytcr_rt5651.c +++ b/sound/soc/intel/boards/bytcr_rt5651.c @@ -41,7 +41,6 @@ enum { BYT_RT5651_DMIC_MAP, BYT_RT5651_IN1_MAP, BYT_RT5651_IN1_IN2_MAP, - BYT_RT5651_IN1_HS_IN3_MAP, }; enum { @@ -90,7 +89,7 @@ struct byt_rt5651_private { /* Default: jack-detect on JD1_1, internal mic on in1, headsetmic on in3 */ static unsigned long byt_rt5651_quirk = BYT_RT5651_DEFAULT_QUIRKS | - BYT_RT5651_IN1_HS_IN3_MAP; + BYT_RT5651_IN1_MAP; static void log_quirks(struct device *dev) { @@ -100,8 +99,6 @@ static void log_quirks(struct device *dev) dev_info(dev, "quirk IN1_MAP enabled"); if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN1_IN2_MAP) dev_info(dev, "quirk IN1_IN2_MAP enabled"); - if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN1_HS_IN3_MAP) - dev_info(dev, "quirk IN1_HS_IN3_MAP enabled"); if (BYT_RT5651_JDSRC(byt_rt5651_quirk)) { dev_info(dev, "quirk realtek,jack-detect-source %ld\n", BYT_RT5651_JDSRC(byt_rt5651_quirk)); @@ -247,7 +244,7 @@ static const struct snd_soc_dapm_route byt_rt5651_intmic_dmic_map[] = { static const struct snd_soc_dapm_route byt_rt5651_intmic_in1_map[] = { {"Internal Mic", NULL, "micbias1"}, {"IN1P", NULL, "Internal Mic"}, - {"IN2P", NULL, "Headset Mic"}, + {"IN3P", NULL, "Headset Mic"}, }; static const struct snd_soc_dapm_route byt_rt5651_intmic_in1_in2_map[] = { @@ -257,12 +254,6 @@ static const struct snd_soc_dapm_route byt_rt5651_intmic_in1_in2_map[] = { {"IN3P", NULL, "Headset Mic"}, }; -static const struct snd_soc_dapm_route byt_rt5651_intmic_in1_hs_in3_map[] = { - {"Internal Mic", NULL, "micbias1"}, - {"IN1P", NULL, "Internal Mic"}, - {"IN3P", NULL, "Headset Mic"}, -}; - static const struct snd_soc_dapm_route byt_rt5651_ssp0_aif1_map[] = { {"ssp0 Tx", NULL, "modem_out"}, {"modem_in", NULL, "ssp0 Rx"}, @@ -348,7 +339,7 @@ static const struct dmi_system_id byt_rt5651_quirk_table[] = { DMI_MATCH(DMI_SYS_VENDOR, "Circuitco"), DMI_MATCH(DMI_PRODUCT_NAME, "Minnowboard Max B3 PLATFORM"), }, - .driver_data = (void *)(BYT_RT5651_IN1_HS_IN3_MAP), + .driver_data = (void *)(BYT_RT5651_IN1_MAP), }, { .callback = byt_rt5651_quirk_cb, @@ -357,7 +348,7 @@ static const struct dmi_system_id byt_rt5651_quirk_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Minnowboard Turbot"), }, .driver_data = (void *)(BYT_RT5651_MCLK_EN | - BYT_RT5651_IN1_HS_IN3_MAP), + BYT_RT5651_IN1_MAP), }, { .callback = byt_rt5651_quirk_cb, @@ -376,7 +367,7 @@ static const struct dmi_system_id byt_rt5651_quirk_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "D2D3_Vi8A1"), }, .driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS | - BYT_RT5651_IN1_HS_IN3_MAP), + BYT_RT5651_IN1_MAP), }, { /* VIOS LTH17 */ @@ -448,10 +439,6 @@ static int byt_rt5651_init(struct snd_soc_pcm_runtime *runtime) custom_map = byt_rt5651_intmic_in1_in2_map; num_routes = ARRAY_SIZE(byt_rt5651_intmic_in1_in2_map); break; - case BYT_RT5651_IN1_HS_IN3_MAP: - custom_map = byt_rt5651_intmic_in1_hs_in3_map; - num_routes = ARRAY_SIZE(byt_rt5651_intmic_in1_hs_in3_map); - break; default: custom_map = byt_rt5651_intmic_dmic_map; num_routes = ARRAY_SIZE(byt_rt5651_intmic_dmic_map); @@ -696,10 +683,8 @@ struct acpi_chan_package { /* ACPICA seems to require 64 bit integers */ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev) { - const char * const intmic_name[] = - { "dmic", "in1", "in12", "in1" }; - const char * const hsmic_name[] = - { "in2", "in2", "in3", "in3" }; + const char * const intmic_name[] = { "dmic", "in1", "in12" }; + const char * const hsmic_name[] = { "in2", "in3", "in3" }; struct byt_rt5651_private *priv; struct snd_soc_acpi_mach *mach; const char *i2c_name = NULL; -- cgit v1.2.3 From 37c7401e8c1f583d197c096152fc87a58f460277 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 24 Jun 2018 16:06:31 +0200 Subject: ASoC: Intel: bytcr_rt5651: Fix DMIC map headsetmic mapping The initial bytcr_rt5651 machine driver commit mapped IN2 as the headset mic. In retrospect this is not correct as all known boards have the headset mic on IN3. This commit fixes the original DMIC mapping to correctly have the headset mic on IN3. Signed-off-by: Hans de Goede Reviewed-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- sound/soc/intel/boards/bytcr_rt5651.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c index bf2adb36f455..042334d9be32 100644 --- a/sound/soc/intel/boards/bytcr_rt5651.c +++ b/sound/soc/intel/boards/bytcr_rt5651.c @@ -236,9 +236,9 @@ static const struct snd_soc_dapm_route byt_rt5651_audio_map[] = { }; static const struct snd_soc_dapm_route byt_rt5651_intmic_dmic_map[] = { - {"IN2P", NULL, "Headset Mic"}, {"DMIC L1", NULL, "Internal Mic"}, {"DMIC R1", NULL, "Internal Mic"}, + {"IN3P", NULL, "Headset Mic"}, }; static const struct snd_soc_dapm_route byt_rt5651_intmic_in1_map[] = { @@ -684,7 +684,7 @@ struct acpi_chan_package { /* ACPICA seems to require 64 bit integers */ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev) { const char * const intmic_name[] = { "dmic", "in1", "in12" }; - const char * const hsmic_name[] = { "in2", "in3", "in3" }; + const char * const hsmic_name[] = { "in3", "in3", "in3" }; struct byt_rt5651_private *priv; struct snd_soc_acpi_mach *mach; const char *i2c_name = NULL; -- cgit v1.2.3 From 8e69cd640097fa7af53fb476dbd3597608f32b10 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 24 Jun 2018 16:06:32 +0200 Subject: ASoC: Intel: bytcr_rt5651: Simplify card long-name Now that the headset-mic is always IN3 there is no reason to have the headset-mic mapping in the long-name. This commit simplifies the long name to "bytcr-rt5651--mic". We can safely do this without causing regressions (UCM profile not found due to the longname change) as the UCM profiles are not in upstream alsa-lib yet. Signed-off-by: Hans de Goede Reviewed-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- sound/soc/intel/boards/bytcr_rt5651.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c index 042334d9be32..e778142b8a6e 100644 --- a/sound/soc/intel/boards/bytcr_rt5651.c +++ b/sound/soc/intel/boards/bytcr_rt5651.c @@ -662,7 +662,7 @@ static struct snd_soc_card byt_rt5651_card = { static char byt_rt5651_codec_name[SND_ACPI_I2C_ID_LEN]; static char byt_rt5651_codec_aif_name[12]; /* = "rt5651-aif[1|2]" */ static char byt_rt5651_cpu_dai_name[10]; /* = "ssp[0|2]-port" */ -static char byt_rt5651_long_name[40]; /* = "bytcr-rt5651-*-spk-*-mic" */ +static char byt_rt5651_long_name[40]; /* = "bytcr-rt5651-*-mic" */ static bool is_valleyview(void) { @@ -683,8 +683,7 @@ struct acpi_chan_package { /* ACPICA seems to require 64 bit integers */ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev) { - const char * const intmic_name[] = { "dmic", "in1", "in12" }; - const char * const hsmic_name[] = { "in3", "in3", "in3" }; + const char * const mic_name[] = { "dmic", "in1", "in12" }; struct byt_rt5651_private *priv; struct snd_soc_acpi_mach *mach; const char *i2c_name = NULL; @@ -831,9 +830,8 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev) } snprintf(byt_rt5651_long_name, sizeof(byt_rt5651_long_name), - "bytcr-rt5651-%s-intmic-%s-hsmic", - intmic_name[BYT_RT5651_MAP(byt_rt5651_quirk)], - hsmic_name[BYT_RT5651_MAP(byt_rt5651_quirk)]); + "bytcr-rt5651-%s-mic", + mic_name[BYT_RT5651_MAP(byt_rt5651_quirk)]); byt_rt5651_card.long_name = byt_rt5651_long_name; ret_val = devm_snd_soc_register_card(&pdev->dev, &byt_rt5651_card); -- cgit v1.2.3 From 8f250e7009d71e6f3f3aeb95a540c36fc9c03398 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 24 Jun 2018 16:06:33 +0200 Subject: ASoC: Intel: bytcr_rt5651: Add BYT_RT5651_HP_LR_SWAPPED quirk One some models (Chuwi Vi8 Plus, Chuwi Hi8 Pro) the headphone output has left and right swapped. This can be fixed in with special mixer settings in the UCM profile, bit this requires these devices loading a different UCM profile. This commit adds a BYT_RT5651_HP_LR_SWAPPED quirk for this and postfixes the longname with "-hp-swapped" if set, so that a different UCM profile will be loaded. We can safely do this without causing regressions (UCM profile not found due to the longname change) as the UCM profiles are not in upstream alsa-lib yet. Signed-off-by: Hans de Goede Reviewed-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- sound/soc/intel/boards/bytcr_rt5651.c | 27 +++++++++++++++++++++++---- 1 file changed, 23 insertions(+), 4 deletions(-) diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c index e778142b8a6e..ffd62eb5c266 100644 --- a/sound/soc/intel/boards/bytcr_rt5651.c +++ b/sound/soc/intel/boards/bytcr_rt5651.c @@ -73,6 +73,7 @@ enum { #define BYT_RT5651_SSP2_AIF2 BIT(19) /* default is using AIF1 */ #define BYT_RT5651_SSP0_AIF1 BIT(20) #define BYT_RT5651_SSP0_AIF2 BIT(21) +#define BYT_RT5651_HP_LR_SWAPPED BIT(22) #define BYT_RT5651_DEFAULT_QUIRKS (BYT_RT5651_MCLK_EN | \ BYT_RT5651_JD1_1 | \ @@ -359,6 +360,17 @@ static const struct dmi_system_id byt_rt5651_quirk_table[] = { .driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS | BYT_RT5651_IN1_IN2_MAP), }, + { + /* Chuwi Hi8 Pro (CWI513) */ + .callback = byt_rt5651_quirk_cb, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hampoo"), + DMI_MATCH(DMI_PRODUCT_NAME, "X1D3_C806N"), + }, + .driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS | + BYT_RT5651_IN1_MAP | + BYT_RT5651_HP_LR_SWAPPED), + }, { /* Chuwi Vi8 Plus (CWI519) */ .callback = byt_rt5651_quirk_cb, @@ -367,7 +379,8 @@ static const struct dmi_system_id byt_rt5651_quirk_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "D2D3_Vi8A1"), }, .driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS | - BYT_RT5651_IN1_MAP), + BYT_RT5651_IN1_MAP | + BYT_RT5651_HP_LR_SWAPPED), }, { /* VIOS LTH17 */ @@ -662,7 +675,7 @@ static struct snd_soc_card byt_rt5651_card = { static char byt_rt5651_codec_name[SND_ACPI_I2C_ID_LEN]; static char byt_rt5651_codec_aif_name[12]; /* = "rt5651-aif[1|2]" */ static char byt_rt5651_cpu_dai_name[10]; /* = "ssp[0|2]-port" */ -static char byt_rt5651_long_name[40]; /* = "bytcr-rt5651-*-mic" */ +static char byt_rt5651_long_name[40]; /* = "bytcr-rt5651-*-mic[-swapped-hp]" */ static bool is_valleyview(void) { @@ -687,6 +700,7 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev) struct byt_rt5651_private *priv; struct snd_soc_acpi_mach *mach; const char *i2c_name = NULL; + const char *hp_swapped; bool is_bytcr = false; int ret_val = 0; int dai_index = 0; @@ -829,9 +843,14 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev) } } + if (byt_rt5651_quirk & BYT_RT5651_HP_LR_SWAPPED) + hp_swapped = "-hp-swapped"; + else + hp_swapped = ""; + snprintf(byt_rt5651_long_name, sizeof(byt_rt5651_long_name), - "bytcr-rt5651-%s-mic", - mic_name[BYT_RT5651_MAP(byt_rt5651_quirk)]); + "bytcr-rt5651-%s-mic%s", + mic_name[BYT_RT5651_MAP(byt_rt5651_quirk)], hp_swapped); byt_rt5651_card.long_name = byt_rt5651_long_name; ret_val = devm_snd_soc_register_card(&pdev->dev, &byt_rt5651_card); -- cgit v1.2.3 From 55d69c0309acea65fb3dd99a05a665b51630362d Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 24 Jun 2018 16:06:34 +0200 Subject: ASoC: Intel: bytcr_rt5651: Sort DMI table entries alphabetically As we get more entries in the DMI quirk table it is nice to have some sort of ordering in the table, sort it alphabetically. Signed-off-by: Hans de Goede Reviewed-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- sound/soc/intel/boards/bytcr_rt5651.c | 41 +++++++++++++++++++---------------- 1 file changed, 22 insertions(+), 19 deletions(-) diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c index ffd62eb5c266..ba2753e0e12a 100644 --- a/sound/soc/intel/boards/bytcr_rt5651.c +++ b/sound/soc/intel/boards/bytcr_rt5651.c @@ -335,23 +335,29 @@ static int byt_rt5651_quirk_cb(const struct dmi_system_id *id) static const struct dmi_system_id byt_rt5651_quirk_table[] = { { + /* Chuwi Hi8 Pro (CWI513) */ .callback = byt_rt5651_quirk_cb, .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Circuitco"), - DMI_MATCH(DMI_PRODUCT_NAME, "Minnowboard Max B3 PLATFORM"), + DMI_MATCH(DMI_SYS_VENDOR, "Hampoo"), + DMI_MATCH(DMI_PRODUCT_NAME, "X1D3_C806N"), }, - .driver_data = (void *)(BYT_RT5651_IN1_MAP), + .driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS | + BYT_RT5651_IN1_MAP | + BYT_RT5651_HP_LR_SWAPPED), }, { + /* Chuwi Vi8 Plus (CWI519) */ .callback = byt_rt5651_quirk_cb, .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "ADI"), - DMI_MATCH(DMI_PRODUCT_NAME, "Minnowboard Turbot"), + DMI_MATCH(DMI_SYS_VENDOR, "Hampoo"), + DMI_MATCH(DMI_PRODUCT_NAME, "D2D3_Vi8A1"), }, - .driver_data = (void *)(BYT_RT5651_MCLK_EN | - BYT_RT5651_IN1_MAP), + .driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS | + BYT_RT5651_IN1_MAP | + BYT_RT5651_HP_LR_SWAPPED), }, { + /* KIANO SlimNote 14.2 */ .callback = byt_rt5651_quirk_cb, .matches = { DMI_MATCH(DMI_SYS_VENDOR, "KIANO"), @@ -361,26 +367,23 @@ static const struct dmi_system_id byt_rt5651_quirk_table[] = { BYT_RT5651_IN1_IN2_MAP), }, { - /* Chuwi Hi8 Pro (CWI513) */ + /* Minnowboard Max B3 */ .callback = byt_rt5651_quirk_cb, .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Hampoo"), - DMI_MATCH(DMI_PRODUCT_NAME, "X1D3_C806N"), + DMI_MATCH(DMI_SYS_VENDOR, "Circuitco"), + DMI_MATCH(DMI_PRODUCT_NAME, "Minnowboard Max B3 PLATFORM"), }, - .driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS | - BYT_RT5651_IN1_MAP | - BYT_RT5651_HP_LR_SWAPPED), + .driver_data = (void *)(BYT_RT5651_IN1_MAP), }, { - /* Chuwi Vi8 Plus (CWI519) */ + /* Minnowboard Turbot */ .callback = byt_rt5651_quirk_cb, .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Hampoo"), - DMI_MATCH(DMI_PRODUCT_NAME, "D2D3_Vi8A1"), + DMI_MATCH(DMI_SYS_VENDOR, "ADI"), + DMI_MATCH(DMI_PRODUCT_NAME, "Minnowboard Turbot"), }, - .driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS | - BYT_RT5651_IN1_MAP | - BYT_RT5651_HP_LR_SWAPPED), + .driver_data = (void *)(BYT_RT5651_MCLK_EN | + BYT_RT5651_IN1_MAP), }, { /* VIOS LTH17 */ -- cgit v1.2.3 From 0ed03e6dc288c50b2e7d71523b99df1afd81cea1 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Tue, 26 Jun 2018 14:11:26 +0200 Subject: ASoC: simple-amplifier: remame dio2125 documentation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The dio2125 is simple enough that we can make it a generic component. Rename the the dio2125 documentation to simple-amplifier to prepare this change. Suggested-by: Nicolò Veronese Signed-off-by: Jerome Brunet Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/dioo,dio2125.txt | 12 ------------ Documentation/devicetree/bindings/sound/simple-amplifier.txt | 12 ++++++++++++ 2 files changed, 12 insertions(+), 12 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/dioo,dio2125.txt create mode 100644 Documentation/devicetree/bindings/sound/simple-amplifier.txt diff --git a/Documentation/devicetree/bindings/sound/dioo,dio2125.txt b/Documentation/devicetree/bindings/sound/dioo,dio2125.txt deleted file mode 100644 index 63dbfe0f11d0..000000000000 --- a/Documentation/devicetree/bindings/sound/dioo,dio2125.txt +++ /dev/null @@ -1,12 +0,0 @@ -DIO2125 Audio Driver - -Required properties: -- compatible : "dioo,dio2125" -- enable-gpios : the gpio connected to the enable pin of the dio2125 - -Example: - -amp: analog-amplifier { - compatible = "dioo,dio2125"; - enable-gpios = <&gpio GPIOH_3 0>; -}; diff --git a/Documentation/devicetree/bindings/sound/simple-amplifier.txt b/Documentation/devicetree/bindings/sound/simple-amplifier.txt new file mode 100644 index 000000000000..8647edae7af0 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/simple-amplifier.txt @@ -0,0 +1,12 @@ +Simple Amplifier Audio Driver + +Required properties: +- compatible : "dioo,dio2125" or "simple-audio-amplifier" +- enable-gpios : the gpio connected to the enable pin of the simple amplifier + +Example: + +amp: analog-amplifier { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpio GPIOH_3 0>; +}; -- cgit v1.2.3 From 8d881bb6216d28896112bdc0b42f1f21eb6cd4ee Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Tue, 26 Jun 2018 14:11:27 +0200 Subject: ASoC: simple-amplifier: rename dio2125 to simple-amplifer MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The dio2125 is simple enough that we can make it a generic component. Just rename and sed the dio2125 amplifier driver to simple_amplifier. Suggested-by: Nicolò Veronese Signed-off-by: Jerome Brunet Signed-off-by: Mark Brown --- sound/soc/codecs/Kconfig | 10 +-- sound/soc/codecs/Makefile | 4 +- sound/soc/codecs/dio2125.c | 120 ----------------------------------- sound/soc/codecs/simple-amplifier.c | 121 ++++++++++++++++++++++++++++++++++++ 4 files changed, 128 insertions(+), 127 deletions(-) delete mode 100644 sound/soc/codecs/dio2125.c create mode 100644 sound/soc/codecs/simple-amplifier.c diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index f6b8d4bf8796..53c2d726bedf 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -74,7 +74,6 @@ config SND_SOC_ALL_CODECS select SND_SOC_DA7219 if I2C select SND_SOC_DA732X if I2C select SND_SOC_DA9055 if I2C - select SND_SOC_DIO2125 select SND_SOC_DMIC if GPIOLIB select SND_SOC_ES8316 if I2C select SND_SOC_ES8328_SPI if SPI_MASTER @@ -144,6 +143,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_RT5682 if I2C select SND_SOC_SGTL5000 if I2C select SND_SOC_SI476X if MFD_SI476X_CORE + select SND_SOC_SIMPLE_AMPLIFIER select SND_SOC_SIRF_AUDIO_CODEC select SND_SOC_SPDIF select SND_SOC_SSM2305 @@ -573,10 +573,6 @@ config SND_SOC_DA732X config SND_SOC_DA9055 tristate -config SND_SOC_DIO2125 - tristate "Dioo DIO2125 Amplifier" - select GPIOLIB - config SND_SOC_DMIC tristate @@ -897,6 +893,10 @@ config SND_SOC_SIGMADSP_REGMAP tristate select SND_SOC_SIGMADSP +config SND_SOC_SIMPLE_AMPLIFIER + tristate "Simple Audio Amplifier" + select GPIOLIB + config SND_SOC_SIRF_AUDIO_CODEC tristate "SiRF SoC internal audio codec" select REGMAP_MMIO diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index e43d99a039d3..f26ded89a1e5 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -250,9 +250,9 @@ snd-soc-wm9713-objs := wm9713.o snd-soc-wm-hubs-objs := wm_hubs.o snd-soc-zx-aud96p22-objs := zx_aud96p22.o # Amp -snd-soc-dio2125-objs := dio2125.o snd-soc-max9877-objs := max9877.o snd-soc-max98504-objs := max98504.o +snd-soc-simple-amplifier-objs := simple-amplifier.o snd-soc-tpa6130a2-objs := tpa6130a2.o snd-soc-tas2552-objs := tas2552.o @@ -509,7 +509,7 @@ obj-$(CONFIG_SND_SOC_WM_HUBS) += snd-soc-wm-hubs.o obj-$(CONFIG_SND_SOC_ZX_AUD96P22) += snd-soc-zx-aud96p22.o # Amp -obj-$(CONFIG_SND_SOC_DIO2125) += snd-soc-dio2125.o obj-$(CONFIG_SND_SOC_MAX9877) += snd-soc-max9877.o obj-$(CONFIG_SND_SOC_MAX98504) += snd-soc-max98504.o +obj-$(CONFIG_SND_SOC_SIMPLE_AMPLIFIER) += snd-soc-simple-amplifier.o obj-$(CONFIG_SND_SOC_TPA6130A2) += snd-soc-tpa6130a2.o diff --git a/sound/soc/codecs/dio2125.c b/sound/soc/codecs/dio2125.c deleted file mode 100644 index 09451cd44f9b..000000000000 --- a/sound/soc/codecs/dio2125.c +++ /dev/null @@ -1,120 +0,0 @@ -/* - * Copyright (c) 2017 BayLibre, SAS. - * Author: Jerome Brunet - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see . - * The full GNU General Public License is included in this distribution - * in the file called COPYING. - */ - -#include -#include -#include - -#define DRV_NAME "dio2125" - -struct dio2125 { - struct gpio_desc *gpiod_enable; -}; - -static int drv_event(struct snd_soc_dapm_widget *w, - struct snd_kcontrol *control, int event) -{ - struct snd_soc_component *c = snd_soc_dapm_to_component(w->dapm); - struct dio2125 *priv = snd_soc_component_get_drvdata(c); - int val; - - switch (event) { - case SND_SOC_DAPM_POST_PMU: - val = 1; - break; - case SND_SOC_DAPM_PRE_PMD: - val = 0; - break; - default: - WARN(1, "Unexpected event"); - return -EINVAL; - } - - gpiod_set_value_cansleep(priv->gpiod_enable, val); - - return 0; -} - -static const struct snd_soc_dapm_widget dio2125_dapm_widgets[] = { - SND_SOC_DAPM_INPUT("INL"), - SND_SOC_DAPM_INPUT("INR"), - SND_SOC_DAPM_OUT_DRV_E("DRV", SND_SOC_NOPM, 0, 0, NULL, 0, drv_event, - (SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD)), - SND_SOC_DAPM_OUTPUT("OUTL"), - SND_SOC_DAPM_OUTPUT("OUTR"), -}; - -static const struct snd_soc_dapm_route dio2125_dapm_routes[] = { - { "DRV", NULL, "INL" }, - { "DRV", NULL, "INR" }, - { "OUTL", NULL, "DRV" }, - { "OUTR", NULL, "DRV" }, -}; - -static const struct snd_soc_component_driver dio2125_component_driver = { - .dapm_widgets = dio2125_dapm_widgets, - .num_dapm_widgets = ARRAY_SIZE(dio2125_dapm_widgets), - .dapm_routes = dio2125_dapm_routes, - .num_dapm_routes = ARRAY_SIZE(dio2125_dapm_routes), -}; - -static int dio2125_probe(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct dio2125 *priv; - int err; - - priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); - if (priv == NULL) - return -ENOMEM; - platform_set_drvdata(pdev, priv); - - priv->gpiod_enable = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW); - if (IS_ERR(priv->gpiod_enable)) { - err = PTR_ERR(priv->gpiod_enable); - if (err != -EPROBE_DEFER) - dev_err(dev, "Failed to get 'enable' gpio: %d", err); - return err; - } - - return devm_snd_soc_register_component(dev, &dio2125_component_driver, - NULL, 0); -} - -#ifdef CONFIG_OF -static const struct of_device_id dio2125_ids[] = { - { .compatible = "dioo,dio2125", }, - { } -}; -MODULE_DEVICE_TABLE(of, dio2125_ids); -#endif - -static struct platform_driver dio2125_driver = { - .driver = { - .name = DRV_NAME, - .of_match_table = of_match_ptr(dio2125_ids), - }, - .probe = dio2125_probe, -}; - -module_platform_driver(dio2125_driver); - -MODULE_DESCRIPTION("ASoC DIO2125 output driver"); -MODULE_AUTHOR("Jerome Brunet "); -MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/simple-amplifier.c b/sound/soc/codecs/simple-amplifier.c new file mode 100644 index 000000000000..6c27d4afaf3a --- /dev/null +++ b/sound/soc/codecs/simple-amplifier.c @@ -0,0 +1,121 @@ +/* + * Copyright (c) 2017 BayLibre, SAS. + * Author: Jerome Brunet + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see . + * The full GNU General Public License is included in this distribution + * in the file called COPYING. + */ + +#include +#include +#include + +#define DRV_NAME "simple-amplifier" + +struct simple_amp { + struct gpio_desc *gpiod_enable; +}; + +static int drv_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *control, int event) +{ + struct snd_soc_component *c = snd_soc_dapm_to_component(w->dapm); + struct simple_amp *priv = snd_soc_component_get_drvdata(c); + int val; + + switch (event) { + case SND_SOC_DAPM_POST_PMU: + val = 1; + break; + case SND_SOC_DAPM_PRE_PMD: + val = 0; + break; + default: + WARN(1, "Unexpected event"); + return -EINVAL; + } + + gpiod_set_value_cansleep(priv->gpiod_enable, val); + + return 0; +} + +static const struct snd_soc_dapm_widget simple_amp_dapm_widgets[] = { + SND_SOC_DAPM_INPUT("INL"), + SND_SOC_DAPM_INPUT("INR"), + SND_SOC_DAPM_OUT_DRV_E("DRV", SND_SOC_NOPM, 0, 0, NULL, 0, drv_event, + (SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD)), + SND_SOC_DAPM_OUTPUT("OUTL"), + SND_SOC_DAPM_OUTPUT("OUTR"), +}; + +static const struct snd_soc_dapm_route simple_amp_dapm_routes[] = { + { "DRV", NULL, "INL" }, + { "DRV", NULL, "INR" }, + { "OUTL", NULL, "DRV" }, + { "OUTR", NULL, "DRV" }, +}; + +static const struct snd_soc_component_driver simple_amp_component_driver = { + .dapm_widgets = simple_amp_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(simple_amp_dapm_widgets), + .dapm_routes = simple_amp_dapm_routes, + .num_dapm_routes = ARRAY_SIZE(simple_amp_dapm_routes), +}; + +static int simple_amp_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct simple_amp *priv; + int err; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (priv == NULL) + return -ENOMEM; + platform_set_drvdata(pdev, priv); + + priv->gpiod_enable = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW); + if (IS_ERR(priv->gpiod_enable)) { + err = PTR_ERR(priv->gpiod_enable); + if (err != -EPROBE_DEFER) + dev_err(dev, "Failed to get 'enable' gpio: %d", err); + return err; + } + + return devm_snd_soc_register_component(dev, + &simple_amp_component_driver, + NULL, 0); +} + +#ifdef CONFIG_OF +static const struct of_device_id simple_amp_ids[] = { + { .compatible = "dioo,dio2125", }, + { } +}; +MODULE_DEVICE_TABLE(of, simple_amp_ids); +#endif + +static struct platform_driver simple_amp_driver = { + .driver = { + .name = DRV_NAME, + .of_match_table = of_match_ptr(simple_amp_ids), + }, + .probe = simple_amp_probe, +}; + +module_platform_driver(simple_amp_driver); + +MODULE_DESCRIPTION("ASoC Simple Audio Amplifier driver"); +MODULE_AUTHOR("Jerome Brunet "); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 8ed237e83ce9ff4b3964a6b096beb1cbd3397d5a Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Tue, 26 Jun 2018 14:11:28 +0200 Subject: ASoC: simple-amplifer: add simple-amplifier compatible MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add simple-audio-amplifier to the list of available compatible Suggested-by: Nicolò Veronese Signed-off-by: Jerome Brunet Signed-off-by: Mark Brown --- sound/soc/codecs/simple-amplifier.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/codecs/simple-amplifier.c b/sound/soc/codecs/simple-amplifier.c index 6c27d4afaf3a..85524acf3e9c 100644 --- a/sound/soc/codecs/simple-amplifier.c +++ b/sound/soc/codecs/simple-amplifier.c @@ -101,6 +101,7 @@ static int simple_amp_probe(struct platform_device *pdev) #ifdef CONFIG_OF static const struct of_device_id simple_amp_ids[] = { { .compatible = "dioo,dio2125", }, + { .compatible = "simple-audio-amplifier", }, { } }; MODULE_DEVICE_TABLE(of, simple_amp_ids); -- cgit v1.2.3 From 599eb9060c7ccaf6a8f0386ab89e3cb5c1f1fea4 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Wed, 27 Jun 2018 09:39:36 +0200 Subject: ASoC: tas571x: add tas5707 compatible Add the tas5707 to the available compatibles of the tas571x driver Signed-off-by: Jerome Brunet Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/tas571x.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/sound/tas571x.txt b/Documentation/devicetree/bindings/sound/tas571x.txt index b4959f10b74b..7c8fd37c2f9e 100644 --- a/Documentation/devicetree/bindings/sound/tas571x.txt +++ b/Documentation/devicetree/bindings/sound/tas571x.txt @@ -7,6 +7,7 @@ powerdown (optional). Required properties: - compatible: should be one of the following: + - "ti,tas5707" - "ti,tas5711", - "ti,tas5717", - "ti,tas5719", -- cgit v1.2.3 From f516d32262a4c0fef3fccdf2a82671f54f5c1e33 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Wed, 27 Jun 2018 09:39:37 +0200 Subject: ASoC: tas517x: add tas5707 support Add support for the tas5707 audio power amplifier. Signed-off-by: Jerome Brunet Signed-off-by: Mark Brown --- sound/soc/codecs/Kconfig | 5 ++- sound/soc/codecs/tas571x.c | 110 +++++++++++++++++++++++++++++++++++++++++++++ sound/soc/codecs/tas571x.h | 16 +++++++ 3 files changed, 130 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 53c2d726bedf..6d1674699385 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -959,8 +959,11 @@ config SND_SOC_TAS5086 depends on I2C config SND_SOC_TAS571X - tristate "Texas Instruments TAS5711/TAS5717/TAS5719/TAS5721 power amplifiers" + tristate "Texas Instruments TAS571x power amplifiers" depends on I2C + help + Enable support for Texas Instruments TAS5707, TAS5711, TAS5717, + TAS5719 and TAS5721 power amplifiers config SND_SOC_TAS5720 tristate "Texas Instruments TAS5720 Mono Audio amplifier" diff --git a/sound/soc/codecs/tas571x.c b/sound/soc/codecs/tas571x.c index 52f34c94ec25..ca2dfe12344e 100644 --- a/sound/soc/codecs/tas571x.c +++ b/sound/soc/codecs/tas571x.c @@ -7,6 +7,9 @@ * TAS5721 support: * Copyright (C) 2016 Petr Kulhavy, Barix AG * + * TAS5707 support: + * Copyright (C) 2018 Jerome Brunet, Baylibre SAS + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -444,6 +447,111 @@ static const struct tas571x_chip tas5711_chip = { .vol_reg_size = 1, }; +static const struct regmap_range tas5707_volatile_regs_range[] = { + regmap_reg_range(TAS571X_CLK_CTRL_REG, TAS571X_ERR_STATUS_REG), + regmap_reg_range(TAS571X_OSC_TRIM_REG, TAS571X_OSC_TRIM_REG), + regmap_reg_range(TAS5707_CH1_BQ0_REG, TAS5707_CH2_BQ6_REG), +}; + +static const struct regmap_access_table tas5707_volatile_regs = { + .yes_ranges = tas5707_volatile_regs_range, + .n_yes_ranges = ARRAY_SIZE(tas5707_volatile_regs_range), + +}; + +static const DECLARE_TLV_DB_SCALE(tas5707_volume_tlv, -7900, 50, 1); + +static const char * const tas5707_volume_slew_step_txt[] = { + "256", "512", "1024", "2048", +}; + +static const unsigned int tas5707_volume_slew_step_values[] = { + 3, 0, 1, 2, +}; + +static SOC_VALUE_ENUM_SINGLE_DECL(tas5707_volume_slew_step_enum, + TAS571X_VOL_CFG_REG, 0, 0x3, + tas5707_volume_slew_step_txt, + tas5707_volume_slew_step_values); + +static const struct snd_kcontrol_new tas5707_controls[] = { + SOC_SINGLE_TLV("Master Volume", + TAS571X_MVOL_REG, + 0, 0xff, 1, tas5707_volume_tlv), + SOC_DOUBLE_R_TLV("Speaker Volume", + TAS571X_CH1_VOL_REG, + TAS571X_CH2_VOL_REG, + 0, 0xff, 1, tas5707_volume_tlv), + SOC_DOUBLE("Speaker Switch", + TAS571X_SOFT_MUTE_REG, + TAS571X_SOFT_MUTE_CH1_SHIFT, TAS571X_SOFT_MUTE_CH2_SHIFT, + 1, 1), + + SOC_ENUM("Slew Rate Steps", tas5707_volume_slew_step_enum), + + BIQUAD_COEFS("CH1 - Biquad 0", TAS5707_CH1_BQ0_REG), + BIQUAD_COEFS("CH1 - Biquad 1", TAS5707_CH1_BQ1_REG), + BIQUAD_COEFS("CH1 - Biquad 2", TAS5707_CH1_BQ2_REG), + BIQUAD_COEFS("CH1 - Biquad 3", TAS5707_CH1_BQ3_REG), + BIQUAD_COEFS("CH1 - Biquad 4", TAS5707_CH1_BQ4_REG), + BIQUAD_COEFS("CH1 - Biquad 5", TAS5707_CH1_BQ5_REG), + BIQUAD_COEFS("CH1 - Biquad 6", TAS5707_CH1_BQ6_REG), + + BIQUAD_COEFS("CH2 - Biquad 0", TAS5707_CH2_BQ0_REG), + BIQUAD_COEFS("CH2 - Biquad 1", TAS5707_CH2_BQ1_REG), + BIQUAD_COEFS("CH2 - Biquad 2", TAS5707_CH2_BQ2_REG), + BIQUAD_COEFS("CH2 - Biquad 3", TAS5707_CH2_BQ3_REG), + BIQUAD_COEFS("CH2 - Biquad 4", TAS5707_CH2_BQ4_REG), + BIQUAD_COEFS("CH2 - Biquad 5", TAS5707_CH2_BQ5_REG), + BIQUAD_COEFS("CH2 - Biquad 6", TAS5707_CH2_BQ6_REG), +}; + +static const struct reg_default tas5707_reg_defaults[] = { + {TAS571X_CLK_CTRL_REG, 0x6c}, + {TAS571X_DEV_ID_REG, 0x70}, + {TAS571X_ERR_STATUS_REG, 0x00}, + {TAS571X_SYS_CTRL_1_REG, 0xa0}, + {TAS571X_SDI_REG, 0x05}, + {TAS571X_SYS_CTRL_2_REG, 0x40}, + {TAS571X_SOFT_MUTE_REG, 0x00}, + {TAS571X_MVOL_REG, 0xff}, + {TAS571X_CH1_VOL_REG, 0x30}, + {TAS571X_CH2_VOL_REG, 0x30}, + {TAS571X_VOL_CFG_REG, 0x91}, + {TAS571X_MODULATION_LIMIT_REG, 0x02}, + {TAS571X_IC_DELAY_CH1_REG, 0xac}, + {TAS571X_IC_DELAY_CH2_REG, 0x54}, + {TAS571X_IC_DELAY_CH3_REG, 0xac}, + {TAS571X_IC_DELAY_CH4_REG, 0x54}, + {TAS571X_START_STOP_PERIOD_REG, 0x0f}, + {TAS571X_OSC_TRIM_REG, 0x82}, + {TAS571X_BKND_ERR_REG, 0x02}, + {TAS571X_INPUT_MUX_REG, 0x17772}, + {TAS571X_PWM_MUX_REG, 0x1021345}, +}; + +static const struct regmap_config tas5707_regmap_config = { + .reg_bits = 8, + .val_bits = 32, + .max_register = 0xff, + .reg_read = tas571x_reg_read, + .reg_write = tas571x_reg_write, + .reg_defaults = tas5707_reg_defaults, + .num_reg_defaults = ARRAY_SIZE(tas5707_reg_defaults), + .cache_type = REGCACHE_RBTREE, + .wr_table = &tas571x_write_regs, + .volatile_table = &tas5707_volatile_regs, +}; + +static const struct tas571x_chip tas5707_chip = { + .supply_names = tas5711_supply_names, + .num_supply_names = ARRAY_SIZE(tas5711_supply_names), + .controls = tas5707_controls, + .num_controls = ARRAY_SIZE(tas5707_controls), + .regmap_config = &tas5707_regmap_config, + .vol_reg_size = 1, +}; + static const char *const tas5717_supply_names[] = { "AVDD", "DVDD", @@ -775,6 +883,7 @@ static int tas571x_i2c_remove(struct i2c_client *client) } static const struct of_device_id tas571x_of_match[] = { + { .compatible = "ti,tas5707", .data = &tas5707_chip, }, { .compatible = "ti,tas5711", .data = &tas5711_chip, }, { .compatible = "ti,tas5717", .data = &tas5717_chip, }, { .compatible = "ti,tas5719", .data = &tas5717_chip, }, @@ -784,6 +893,7 @@ static const struct of_device_id tas571x_of_match[] = { MODULE_DEVICE_TABLE(of, tas571x_of_match); static const struct i2c_device_id tas571x_i2c_id[] = { + { "tas5707", (kernel_ulong_t) &tas5707_chip }, { "tas5711", (kernel_ulong_t) &tas5711_chip }, { "tas5717", (kernel_ulong_t) &tas5717_chip }, { "tas5719", (kernel_ulong_t) &tas5717_chip }, diff --git a/sound/soc/codecs/tas571x.h b/sound/soc/codecs/tas571x.h index c45677bc26ad..bd23e89cfe79 100644 --- a/sound/soc/codecs/tas571x.h +++ b/sound/soc/codecs/tas571x.h @@ -53,6 +53,22 @@ #define TAS571X_PWM_MUX_REG 0x25 /* 20-byte biquad registers */ +#define TAS5707_CH1_BQ0_REG 0x29 +#define TAS5707_CH1_BQ1_REG 0x2a +#define TAS5707_CH1_BQ2_REG 0x2b +#define TAS5707_CH1_BQ3_REG 0x2c +#define TAS5707_CH1_BQ4_REG 0x2d +#define TAS5707_CH1_BQ5_REG 0x2e +#define TAS5707_CH1_BQ6_REG 0x2f + +#define TAS5707_CH2_BQ0_REG 0x30 +#define TAS5707_CH2_BQ1_REG 0x31 +#define TAS5707_CH2_BQ2_REG 0x32 +#define TAS5707_CH2_BQ3_REG 0x33 +#define TAS5707_CH2_BQ4_REG 0x34 +#define TAS5707_CH2_BQ5_REG 0x35 +#define TAS5707_CH2_BQ6_REG 0x36 + #define TAS5717_CH1_BQ0_REG 0x26 #define TAS5717_CH1_BQ1_REG 0x27 #define TAS5717_CH1_BQ2_REG 0x28 -- cgit v1.2.3 From 0ca54b29054151b7a52cbb8904732280afe5a302 Mon Sep 17 00:00:00 2001 From: Sean Young Date: Tue, 26 Jun 2018 11:03:18 -0400 Subject: media: rc: be less noisy when driver misbehaves Since commit 48231f289e52 ("media: rc: drivers should produce alternate pulse and space timing events"), on meson-ir we are regularly producing errors. Reduce to warning level and only warn once to avoid flooding the log. A proper fix for meson-ir is going to be too large for v4.18. Signed-off-by: Sean Young Cc: stable@vger.kernel.org # 4.17+ Tested-by: Jerome Brunet Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/rc-ir-raw.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/media/rc/rc-ir-raw.c b/drivers/media/rc/rc-ir-raw.c index 2e0066b1a31c..e7948908e78c 100644 --- a/drivers/media/rc/rc-ir-raw.c +++ b/drivers/media/rc/rc-ir-raw.c @@ -30,13 +30,13 @@ static int ir_raw_event_thread(void *data) while (kfifo_out(&raw->kfifo, &ev, 1)) { if (is_timing_event(ev)) { if (ev.duration == 0) - dev_err(&dev->dev, "nonsensical timing event of duration 0"); + dev_warn_once(&dev->dev, "nonsensical timing event of duration 0"); if (is_timing_event(raw->prev_ev) && !is_transition(&ev, &raw->prev_ev)) - dev_err(&dev->dev, "two consecutive events of type %s", - TO_STR(ev.pulse)); + dev_warn_once(&dev->dev, "two consecutive events of type %s", + TO_STR(ev.pulse)); if (raw->prev_ev.reset && ev.pulse == 0) - dev_err(&dev->dev, "timing event after reset should be pulse"); + dev_warn_once(&dev->dev, "timing event after reset should be pulse"); } list_for_each_entry(handler, &ir_raw_handler_list, list) if (dev->enabled_protocols & -- cgit v1.2.3 From 7284fdf39a912322ce97de2d30def3c6068a418c Mon Sep 17 00:00:00 2001 From: Zhen Lei Date: Wed, 27 Jun 2018 11:49:28 +0800 Subject: esp6: fix memleak on error path in esp6_input This ought to be an omission in e6194923237 ("esp: Fix memleaks on error paths."). The memleak on error path in esp6_input is similar to esp_input of esp4. Fixes: e6194923237 ("esp: Fix memleaks on error paths.") Fixes: 3f29770723f ("ipsec: check return value of skb_to_sgvec always") Signed-off-by: Zhen Lei Signed-off-by: Steffen Klassert --- net/ipv6/esp6.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/ipv6/esp6.c b/net/ipv6/esp6.c index 97513f35bcc5..88a7579c23bd 100644 --- a/net/ipv6/esp6.c +++ b/net/ipv6/esp6.c @@ -669,8 +669,10 @@ skip_cow: sg_init_table(sg, nfrags); ret = skb_to_sgvec(skb, sg, 0, skb->len); - if (unlikely(ret < 0)) + if (unlikely(ret < 0)) { + kfree(tmp); goto out; + } skb->ip_summed = CHECKSUM_NONE; -- cgit v1.2.3 From 9191fc2a431bade3dedc9ad17759495a9f82f41b Mon Sep 17 00:00:00 2001 From: Ryan Hsu Date: Mon, 18 Jun 2018 17:00:04 +0300 Subject: ath10k: update the phymode along with bandwidth change request MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In the case of Station connects to AP with narrower bandwidth at beginning. And later the AP changes the bandwidth to winder bandwidth, the AP will beacon with wider bandwidth IE, eg VHT20->VHT40->VHT80 or VHT40->VHT80. Since the supported BANDWIDTH will be limited by the PHYMODE, so while Station receives the bandwidth change request, it will also need to reconfigure the PHYMODE setting to firmware instead of just configuring the BANDWIDTH info, otherwise it'll trigger a firmware crash with non-support bandwidth. The issue was observed in WLAN.RM.4.4.1-00051-QCARMSWP-1, QCA6174 with below scenario: AP xxx changed bandwidth, new config is 5200 MHz, width 2 (5190/0 MHz) disconnect from AP xxx for new auth to yyy RX ReassocResp from xxx (capab=0x1111 status=0 aid=102) associated .... AP xxx changed bandwidth, new config is 5200 MHz, width 2 (5190/0 MHz) AP xxx changed bandwidth, new config is 5200 MHz, width 3 (5210/0 MHz) .... firmware register dump: [00]: 0x05030000 0x000015B3 0x00987291 0x00955B31 [04]: 0x00987291 0x00060730 0x00000004 0x00000001 [08]: 0x004089F0 0x00955A00 0x000A0B00 0x00400000 [12]: 0x00000009 0x00000000 0x00952CD0 0x00952CE6 [16]: 0x00952CC4 0x0098E25F 0x00000000 0x0091080D [20]: 0x40987291 0x0040E7A8 0x00000000 0x0041EE3C [24]: 0x809ABF05 0x0040E808 0x00000000 0xC0987291 [28]: 0x809A650C 0x0040E948 0x0041FE40 0x004345C4 [32]: 0x809A5C63 0x0040E988 0x0040E9AC 0x0042D1A8 [36]: 0x8091D252 0x0040E9A8 0x00000002 0x00000001 [40]: 0x809FDA9D 0x0040EA58 0x0043D554 0x0042D554 [44]: 0x809F8B22 0x0040EA78 0x0043D554 0x00000001 [48]: 0x80911210 0x0040EAC8 0x00000010 0x004041D0 [52]: 0x80911154 0x0040EB28 0x00400000 0x00000000 [56]: 0x8091122D 0x0040EB48 0x00000000 0x00400600 Reported-by: Rouven Czerwinski Tested-by: Timur Kristóf Signed-off-by: Ryan Hsu Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/mac.c | 16 ++++++++++++++-- drivers/net/wireless/ath/ath10k/wmi.h | 1 + 2 files changed, 15 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index e9c2fb318c03..836e0a47b94a 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -6058,8 +6058,19 @@ static void ath10k_sta_rc_update_wk(struct work_struct *wk) ath10k_mac_max_vht_nss(vht_mcs_mask))); if (changed & IEEE80211_RC_BW_CHANGED) { - ath10k_dbg(ar, ATH10K_DBG_MAC, "mac update sta %pM peer bw %d\n", - sta->addr, bw); + enum wmi_phy_mode mode; + + mode = chan_to_phymode(&def); + ath10k_dbg(ar, ATH10K_DBG_MAC, "mac update sta %pM peer bw %d phymode %d\n", + sta->addr, bw, mode); + + err = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, sta->addr, + WMI_PEER_PHYMODE, mode); + if (err) { + ath10k_warn(ar, "failed to update STA %pM peer phymode %d: %d\n", + sta->addr, mode, err); + goto exit; + } err = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, sta->addr, WMI_PEER_CHAN_WIDTH, bw); @@ -6100,6 +6111,7 @@ static void ath10k_sta_rc_update_wk(struct work_struct *wk) sta->addr); } +exit: mutex_unlock(&ar->conf_mutex); } diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h index b48db54e9865..d68afb65402a 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.h +++ b/drivers/net/wireless/ath/ath10k/wmi.h @@ -6144,6 +6144,7 @@ enum wmi_peer_param { WMI_PEER_NSS = 0x5, WMI_PEER_USE_4ADDR = 0x6, WMI_PEER_DEBUG = 0xa, + WMI_PEER_PHYMODE = 0xd, WMI_PEER_DUMMY_VAR = 0xff, /* dummy parameter for STA PS workaround */ }; -- cgit v1.2.3 From 371d5e9d99e1e6051ce8bd02ab3db4d43be62b85 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 18 Jun 2018 17:00:08 +0300 Subject: wcn36xx: Remove Unicode Byte Order Mark from testcode MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Older gcc (< 4.4) doesn't like files starting with a Unicode BOM: drivers/net/wireless/ath/wcn36xx/testmode.c:1: error: stray ‘\357’ in program drivers/net/wireless/ath/wcn36xx/testmode.c:1: error: stray ‘\273’ in program drivers/net/wireless/ath/wcn36xx/testmode.c:1: error: stray ‘\277’ in program Remove the BOM, the rest of the file is plain ASCII anyway. Output of "file drivers/net/wireless/ath/wcn36xx/testmode.c" before: drivers/net/wireless/ath/wcn36xx/testmode.c: C source, UTF-8 Unicode (with BOM) text and after: drivers/net/wireless/ath/wcn36xx/testmode.c: C source, ASCII text Fixes: 87f825e6e246cee0 ("wcn36xx: Add support for Factory Test Mode (FTM)") Signed-off-by: Geert Uytterhoeven Acked-by: Ramon Fried Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/wcn36xx/testmode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/wcn36xx/testmode.c b/drivers/net/wireless/ath/wcn36xx/testmode.c index 1279064a3b71..51a038022c8b 100644 --- a/drivers/net/wireless/ath/wcn36xx/testmode.c +++ b/drivers/net/wireless/ath/wcn36xx/testmode.c @@ -1,4 +1,4 @@ -/* +/* * Copyright (c) 2018, The Linux Foundation. All rights reserved. * * Permission to use, copy, modify, and/or distribute this software for any -- cgit v1.2.3 From de15d7ff5bef98746fcb76a0db7ac46de48d3560 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Tue, 26 Jun 2018 12:07:25 +0200 Subject: ASoC: dpcm: improve runtime update predictability As it is, dpcm_runtime_update() performs the old path and new path update of a frontend before going on to the next frontend DAI. Depending the order of the FEs within the rtd list, the result of the update might be different. For example: * Frontend A connected to backend C, with a 48kHz playback * Frontend B connected to backend D, with a 44.1kHz playback * FE A appears before FE B in the rtd list of the card. If we reparent BE C to FE B (disconnecting BE D): * old path update of FE A will run first, and BE C will get hw_free() and shutdown() * new path update of FE B will run after and BE C, which is stopped, so it will be configured at 44.1kHz, as expected If we reparent BE D to FE A (disconnecting BE C): * new path update of FE A will run first but since BE D is still running at 44.1kHz, it won't be reconfigured (no call to startup() or hw_params()) * old path update of FE B runs after, nothing happens * In this case, we end up with a BE playing at 44.1kHz a stream which is supposed to be played at 48Khz (too slow) To improve this situation, this patch performs all the FE old paths update before going on to update the new paths. With this, the result should no longer depend on the order of the FE within the card rtd list. Please note that there might be a small performance penalty since dpcm_process_paths() is called twice per stream direction. Signed-off-by: Jerome Brunet Signed-off-by: Mark Brown --- sound/soc/soc-pcm.c | 165 +++++++++++++++++++++++++++------------------------- 1 file changed, 86 insertions(+), 79 deletions(-) diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c index 19ebfc958b9d..63f96cde046a 100644 --- a/sound/soc/soc-pcm.c +++ b/sound/soc/soc-pcm.c @@ -2597,106 +2597,113 @@ static int dpcm_run_old_update(struct snd_soc_pcm_runtime *fe, int stream) return ret; } -/* Called by DAPM mixer/mux changes to update audio routing between PCMs and - * any DAI links. - */ -int soc_dpcm_runtime_update(struct snd_soc_card *card) +static int soc_dpcm_fe_runtime_update(struct snd_soc_pcm_runtime *fe, int new) { - struct snd_soc_pcm_runtime *fe; - int old, new, paths; + struct snd_soc_dapm_widget_list *list; + int count, paths; - mutex_lock_nested(&card->mutex, SND_SOC_CARD_CLASS_RUNTIME); - list_for_each_entry(fe, &card->rtd_list, list) { - struct snd_soc_dapm_widget_list *list; + if (!fe->dai_link->dynamic) + return 0; - /* make sure link is FE */ - if (!fe->dai_link->dynamic) - continue; + /* only check active links */ + if (!fe->cpu_dai->active) + return 0; - /* only check active links */ - if (!fe->cpu_dai->active) - continue; + /* DAPM sync will call this to update DSP paths */ + dev_dbg(fe->dev, "ASoC: DPCM %s runtime update for FE %s\n", + new ? "new" : "old", fe->dai_link->name); - /* DAPM sync will call this to update DSP paths */ - dev_dbg(fe->dev, "ASoC: DPCM runtime update for FE %s\n", - fe->dai_link->name); + /* skip if FE doesn't have playback capability */ + if (!fe->cpu_dai->driver->playback.channels_min || + !fe->codec_dai->driver->playback.channels_min) + goto capture; - /* skip if FE doesn't have playback capability */ - if (!fe->cpu_dai->driver->playback.channels_min - || !fe->codec_dai->driver->playback.channels_min) - goto capture; - - /* skip if FE isn't currently playing */ - if (!fe->cpu_dai->playback_active - || !fe->codec_dai->playback_active) - goto capture; - - paths = dpcm_path_get(fe, SNDRV_PCM_STREAM_PLAYBACK, &list); - if (paths < 0) { - dev_warn(fe->dev, "ASoC: %s no valid %s path\n", - fe->dai_link->name, "playback"); - mutex_unlock(&card->mutex); - return paths; - } + /* skip if FE isn't currently playing */ + if (!fe->cpu_dai->playback_active || !fe->codec_dai->playback_active) + goto capture; - /* update any new playback paths */ - new = dpcm_process_paths(fe, SNDRV_PCM_STREAM_PLAYBACK, &list, 1); - if (new) { - dpcm_run_new_update(fe, SNDRV_PCM_STREAM_PLAYBACK); - dpcm_clear_pending_state(fe, SNDRV_PCM_STREAM_PLAYBACK); - dpcm_be_disconnect(fe, SNDRV_PCM_STREAM_PLAYBACK); - } + paths = dpcm_path_get(fe, SNDRV_PCM_STREAM_PLAYBACK, &list); + if (paths < 0) { + dev_warn(fe->dev, "ASoC: %s no valid %s path\n", + fe->dai_link->name, "playback"); + return paths; + } - /* update any old playback paths */ - old = dpcm_process_paths(fe, SNDRV_PCM_STREAM_PLAYBACK, &list, 0); - if (old) { + /* update any playback paths */ + count = dpcm_process_paths(fe, SNDRV_PCM_STREAM_PLAYBACK, &list, new); + if (count) { + if (new) + dpcm_run_new_update(fe, SNDRV_PCM_STREAM_PLAYBACK); + else dpcm_run_old_update(fe, SNDRV_PCM_STREAM_PLAYBACK); - dpcm_clear_pending_state(fe, SNDRV_PCM_STREAM_PLAYBACK); - dpcm_be_disconnect(fe, SNDRV_PCM_STREAM_PLAYBACK); - } - dpcm_path_put(&list); + dpcm_clear_pending_state(fe, SNDRV_PCM_STREAM_PLAYBACK); + dpcm_be_disconnect(fe, SNDRV_PCM_STREAM_PLAYBACK); + } + + dpcm_path_put(&list); + capture: - /* skip if FE doesn't have capture capability */ - if (!fe->cpu_dai->driver->capture.channels_min - || !fe->codec_dai->driver->capture.channels_min) - continue; + /* skip if FE doesn't have capture capability */ + if (!fe->cpu_dai->driver->capture.channels_min || + !fe->codec_dai->driver->capture.channels_min) + return 0; - /* skip if FE isn't currently capturing */ - if (!fe->cpu_dai->capture_active - || !fe->codec_dai->capture_active) - continue; + /* skip if FE isn't currently capturing */ + if (!fe->cpu_dai->capture_active || !fe->codec_dai->capture_active) + return 0; - paths = dpcm_path_get(fe, SNDRV_PCM_STREAM_CAPTURE, &list); - if (paths < 0) { - dev_warn(fe->dev, "ASoC: %s no valid %s path\n", - fe->dai_link->name, "capture"); - mutex_unlock(&card->mutex); - return paths; - } + paths = dpcm_path_get(fe, SNDRV_PCM_STREAM_CAPTURE, &list); + if (paths < 0) { + dev_warn(fe->dev, "ASoC: %s no valid %s path\n", + fe->dai_link->name, "capture"); + return paths; + } - /* update any new capture paths */ - new = dpcm_process_paths(fe, SNDRV_PCM_STREAM_CAPTURE, &list, 1); - if (new) { + /* update any old capture paths */ + count = dpcm_process_paths(fe, SNDRV_PCM_STREAM_CAPTURE, &list, new); + if (count) { + if (new) dpcm_run_new_update(fe, SNDRV_PCM_STREAM_CAPTURE); - dpcm_clear_pending_state(fe, SNDRV_PCM_STREAM_CAPTURE); - dpcm_be_disconnect(fe, SNDRV_PCM_STREAM_CAPTURE); - } - - /* update any old capture paths */ - old = dpcm_process_paths(fe, SNDRV_PCM_STREAM_CAPTURE, &list, 0); - if (old) { + else dpcm_run_old_update(fe, SNDRV_PCM_STREAM_CAPTURE); - dpcm_clear_pending_state(fe, SNDRV_PCM_STREAM_CAPTURE); - dpcm_be_disconnect(fe, SNDRV_PCM_STREAM_CAPTURE); - } - dpcm_path_put(&list); + dpcm_clear_pending_state(fe, SNDRV_PCM_STREAM_CAPTURE); + dpcm_be_disconnect(fe, SNDRV_PCM_STREAM_CAPTURE); } - mutex_unlock(&card->mutex); + dpcm_path_put(&list); + return 0; } + +/* Called by DAPM mixer/mux changes to update audio routing between PCMs and + * any DAI links. + */ +int soc_dpcm_runtime_update(struct snd_soc_card *card) +{ + struct snd_soc_pcm_runtime *fe; + int ret = 0; + + mutex_lock_nested(&card->mutex, SND_SOC_CARD_CLASS_RUNTIME); + /* shutdown all old paths first */ + list_for_each_entry(fe, &card->rtd_list, list) { + ret = soc_dpcm_fe_runtime_update(fe, 0); + if (ret) + goto out; + } + + /* bring new paths up */ + list_for_each_entry(fe, &card->rtd_list, list) { + ret = soc_dpcm_fe_runtime_update(fe, 1); + if (ret) + goto out; + } + +out: + mutex_unlock(&card->mutex); + return ret; +} int soc_dpcm_be_digital_mute(struct snd_soc_pcm_runtime *fe, int mute) { struct snd_soc_dpcm *dpcm; -- cgit v1.2.3 From c54c1c5ee8e73b7cb752834e52e2129b1dab00bd Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 27 Jun 2018 11:56:53 +0300 Subject: ASoC: qdsp6: qdafe: fix some off by one bugs The > should be >= or we could read one element beyond the end of the port_maps[] array. Fixes: 7fa2d70f9766 ("ASoC: qdsp6: q6afe: Add q6afe driver") Signed-off-by: Dan Carpenter Acked-by: Srinivas Kandagatla Signed-off-by: Mark Brown --- sound/soc/qcom/qdsp6/q6afe.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/qcom/qdsp6/q6afe.c b/sound/soc/qcom/qdsp6/q6afe.c index 621b67b34db9..671743453fbb 100644 --- a/sound/soc/qcom/qdsp6/q6afe.c +++ b/sound/soc/qcom/qdsp6/q6afe.c @@ -776,7 +776,7 @@ static int q6afe_callback(struct apr_device *adev, struct apr_resp_pkt *data) */ int q6afe_get_port_id(int index) { - if (index < 0 || index > AFE_PORT_MAX) + if (index < 0 || index >= AFE_PORT_MAX) return -EINVAL; return port_maps[index].port_id; @@ -1013,7 +1013,7 @@ int q6afe_port_stop(struct q6afe_port *port) port_id = port->id; index = port->token; - if (index < 0 || index > AFE_PORT_MAX) { + if (index < 0 || index >= AFE_PORT_MAX) { dev_err(afe->dev, "AFE port index[%d] invalid!\n", index); return -EINVAL; } @@ -1354,7 +1354,7 @@ struct q6afe_port *q6afe_port_get_from_id(struct device *dev, int id) unsigned long flags; int cfg_type; - if (id < 0 || id > AFE_PORT_MAX) { + if (id < 0 || id >= AFE_PORT_MAX) { dev_err(dev, "AFE port token[%d] invalid!\n", id); return ERR_PTR(-EINVAL); } -- cgit v1.2.3 From 4f2bd18b191a10660782f2f1ccc989b000b2be63 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Wed, 27 Jun 2018 11:48:18 +0200 Subject: ASoC: dpcm: extend channel merging to the backend cpu dai Extend dpcm_merge_chan to also check backend cpu dai channels capabilities. Apply the same policy as soc_pcm_init_runtime_hw() for multicodec links and only check cpu dai in this case. Cc: Jiada Wang Signed-off-by: Jerome Brunet Signed-off-by: Mark Brown --- sound/soc/soc-pcm.c | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c index 63f96cde046a..6ee4131941df 100644 --- a/sound/soc/soc-pcm.c +++ b/sound/soc/soc-pcm.c @@ -1736,12 +1736,26 @@ static void dpcm_runtime_base_chan(struct snd_pcm_substream *substream, list_for_each_entry(dpcm, &fe->dpcm[stream].be_clients, list_be) { struct snd_soc_pcm_runtime *be = dpcm->be; + struct snd_soc_dai_driver *cpu_dai_drv = be->cpu_dai->driver; struct snd_soc_dai_driver *codec_dai_drv; struct snd_soc_pcm_stream *codec_stream; - int i; + struct snd_soc_pcm_stream *cpu_stream; + + if (stream == SNDRV_PCM_STREAM_PLAYBACK) + cpu_stream = &cpu_dai_drv->playback; + else + cpu_stream = &cpu_dai_drv->capture; + + *channels_min = max(*channels_min, cpu_stream->channels_min); + *channels_max = min(*channels_max, cpu_stream->channels_max); + + /* + * chan min/max cannot be enforced if there are multiple CODEC + * DAIs connected to a single CPU DAI, use CPU DAI's directly + */ + if (be->num_codecs == 1) { + codec_dai_drv = be->codec_dais[0]->driver; - for (i = 0; i < be->num_codecs; i++) { - codec_dai_drv = be->codec_dais[i]->driver; if (stream == SNDRV_PCM_STREAM_PLAYBACK) codec_stream = &codec_dai_drv->playback; else -- cgit v1.2.3 From 4febced15ac8ddb9cf3e603edb111842e4863d9a Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Wed, 27 Jun 2018 17:36:38 +0200 Subject: ASoC: dpcm: don't merge format from invalid codec dai When merging codec formats, dpcm_runtime_base_format() should skip the codecs which are not supporting the current stream direction. At the moment, if a BE link has more than one codec, and only one of these codecs has no capture DAI, it becomes impossible to start a capture stream because the merged format would be 0. Skipping invalid codec DAI solves the problem. Fixes: b073ed4e2126 ("ASoC: soc-pcm: DPCM cares BE format") Signed-off-by: Jerome Brunet Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/soc-pcm.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c index 5e7ae47a9658..5feae9666822 100644 --- a/sound/soc/soc-pcm.c +++ b/sound/soc/soc-pcm.c @@ -1694,6 +1694,14 @@ static u64 dpcm_runtime_base_format(struct snd_pcm_substream *substream) int i; for (i = 0; i < be->num_codecs; i++) { + /* + * Skip CODECs which don't support the current stream + * type. See soc_pcm_init_runtime_hw() for more details + */ + if (!snd_soc_dai_stream_valid(be->codec_dais[i], + stream)) + continue; + codec_dai_drv = be->codec_dais[i]->driver; if (stream == SNDRV_PCM_STREAM_PLAYBACK) codec_stream = &codec_dai_drv->playback; -- cgit v1.2.3 From 9991274fddb9fd4413cb166763cf7368f5086419 Mon Sep 17 00:00:00 2001 From: Carlos Maiolino Date: Thu, 28 Jun 2018 06:56:23 -0700 Subject: xfs: Initialize variables in xfs_alloc_get_rec before using them Make sure we initialize *bno and *len, before jumping to out_bad_rec label, and risk calling xfs_warn() with uninitialized variables. Coverity: 100898 Coverity: 1437081 Coverity: 1437129 Coverity: 1437191 Coverity: 1437201 Coverity: 1437212 Coverity: 1437341 Signed-off-by: Carlos Maiolino Reviewed-by: Brian Foster Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong --- fs/xfs/libxfs/xfs_alloc.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/xfs/libxfs/xfs_alloc.c b/fs/xfs/libxfs/xfs_alloc.c index eef466260d43..75dbdc14c45f 100644 --- a/fs/xfs/libxfs/xfs_alloc.c +++ b/fs/xfs/libxfs/xfs_alloc.c @@ -223,12 +223,13 @@ xfs_alloc_get_rec( error = xfs_btree_get_rec(cur, &rec, stat); if (error || !(*stat)) return error; - if (rec->alloc.ar_blockcount == 0) - goto out_bad_rec; *bno = be32_to_cpu(rec->alloc.ar_startblock); *len = be32_to_cpu(rec->alloc.ar_blockcount); + if (*len == 0) + goto out_bad_rec; + /* check for valid extent range, including overflow */ if (!xfs_verify_agbno(mp, agno, *bno)) goto out_bad_rec; -- cgit v1.2.3 From d70262ea0e36af4f7812e67108baa818592cde8f Mon Sep 17 00:00:00 2001 From: Jaedon Shin Date: Fri, 8 Jun 2018 15:10:15 +0900 Subject: phy: phy-brcm-usb-init: Fix power down USB 3.0 PHY when XHCI reenabled Unset is required to enable USB 3.0 PHY when XHCI reenabled in response to setting PHY3_IDDQ_OVERRIDE in uninit(). Fixes: cd6f769fdea7 ("phy: phy-brcm-usb-init: Power down USB 3.0 PHY when XHCI disabled") Signed-off-by: Jaedon Shin Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/broadcom/phy-brcm-usb-init.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/phy/broadcom/phy-brcm-usb-init.c b/drivers/phy/broadcom/phy-brcm-usb-init.c index 1b7febc43da9..29d2c3b1913a 100644 --- a/drivers/phy/broadcom/phy-brcm-usb-init.c +++ b/drivers/phy/broadcom/phy-brcm-usb-init.c @@ -962,6 +962,10 @@ void brcm_usb_init_xhci(struct brcm_usb_init_params *params) { void __iomem *ctrl = params->ctrl_regs; + USB_CTRL_UNSET(ctrl, USB30_PCTL, PHY3_IDDQ_OVERRIDE); + /* 1 millisecond - for USB clocks to settle down */ + usleep_range(1000, 2000); + if (BRCM_ID(params->family_id) == 0x7366) { /* * The PHY3_SOFT_RESETB bits default to the wrong state. -- cgit v1.2.3 From ad5003300b077bf1af15e667097b3b1f73288177 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 31 May 2018 10:05:38 -0700 Subject: phy: mapphone-mdm6600: Fix wrong enum used for status lines Kbuilt test robot reported: drivers/phy/motorola/phy-mapphone-mdm6600.c:188:16: warning: is used uninitialized in this function [-Wuninitialized] val |= values[i] << i; ~~~~~~^~~ Looking at the phy_mdm6600_status() values does get initialized by gpiod_get_array_value_cansleep(), but we are using wrong enum in that function. Let's fix the use, both end up being three though so urgent rush on this one AFAIK. Fixes: 5d1ebbda0318 ("phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4") Reported-by: kbuild test robot Signed-off-by: Tony Lindgren Reviewed-by: Pavel Machek Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/motorola/phy-mapphone-mdm6600.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/phy/motorola/phy-mapphone-mdm6600.c b/drivers/phy/motorola/phy-mapphone-mdm6600.c index 23705e1a0023..0075fb0bef8c 100644 --- a/drivers/phy/motorola/phy-mapphone-mdm6600.c +++ b/drivers/phy/motorola/phy-mapphone-mdm6600.c @@ -182,13 +182,13 @@ static void phy_mdm6600_status(struct work_struct *work) ddata = container_of(work, struct phy_mdm6600, status_work.work); dev = ddata->dev; - error = gpiod_get_array_value_cansleep(PHY_MDM6600_NR_CMD_LINES, + error = gpiod_get_array_value_cansleep(PHY_MDM6600_NR_STATUS_LINES, ddata->status_gpios->desc, values); if (error) return; - for (i = 0; i < PHY_MDM6600_NR_CMD_LINES; i++) { + for (i = 0; i < PHY_MDM6600_NR_STATUS_LINES; i++) { val |= values[i] << i; dev_dbg(ddata->dev, "XXX %s: i: %i values[i]: %i val: %i\n", __func__, i, values[i], val); -- cgit v1.2.3 From 9a98302de19991d51e067b88750585203b2a3ab6 Mon Sep 17 00:00:00 2001 From: Ping-Ke Shih Date: Thu, 28 Jun 2018 10:02:27 +0800 Subject: rtlwifi: rtl8821ae: fix firmware is not ready to run Without this patch, firmware will not run properly on rtl8821ae, and it causes bad user experience. For example, bad connection performance with low rate, higher power consumption, and so on. rtl8821ae uses two kinds of firmwares for normal and WoWlan cases, and each firmware has firmware data buffer and size individually. Original code always overwrite size of normal firmware rtlpriv->rtlhal.fwsize, and this mismatch causes firmware checksum error, then firmware can't start. In this situation, driver gives message "Firmware is not ready to run!". Fixes: fe89707f0afa ("rtlwifi: rtl8821ae: Simplify loading of WOWLAN firmware") Signed-off-by: Ping-Ke Shih Cc: Stable # 4.0+ Reviewed-by: Larry Finger Signed-off-by: Kalle Valo --- drivers/net/wireless/realtek/rtlwifi/core.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/wireless/realtek/rtlwifi/core.c b/drivers/net/wireless/realtek/rtlwifi/core.c index a3f46203ee7a..4bf7967590ca 100644 --- a/drivers/net/wireless/realtek/rtlwifi/core.c +++ b/drivers/net/wireless/realtek/rtlwifi/core.c @@ -130,7 +130,6 @@ found_alt: firmware->size); rtlpriv->rtlhal.wowlan_fwsize = firmware->size; } - rtlpriv->rtlhal.fwsize = firmware->size; release_firmware(firmware); } -- cgit v1.2.3 From 8f54061d001ad2da24dba89fc48adbbf4c85222b Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Thu, 28 Jun 2018 22:08:37 +0200 Subject: ASoC: pxa: remove the dmaengine compat need As the pxa architecture switched towards the dmaengine slave map, the old compatibility mechanism to acquire the dma requestor line number and priority are not needed anymore. This patch simplifies the dma resource acquisition, using the more generic function dma_request_slave_channel(). Signed-off-by: Robert Jarzmik Signed-off-by: Daniel Mack Signed-off-by: Mark Brown --- sound/arm/pxa2xx-ac97.c | 14 ++------------ sound/arm/pxa2xx-pcm-lib.c | 6 +++--- sound/soc/pxa/pxa2xx-ac97.c | 32 +++++--------------------------- sound/soc/pxa/pxa2xx-i2s.c | 6 ++---- 4 files changed, 12 insertions(+), 46 deletions(-) diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c index 4bc244c40f80..236a63cdaf9f 100644 --- a/sound/arm/pxa2xx-ac97.c +++ b/sound/arm/pxa2xx-ac97.c @@ -63,28 +63,18 @@ static struct snd_ac97_bus_ops pxa2xx_ac97_ops = { .reset = pxa2xx_ac97_legacy_reset, }; -static struct pxad_param pxa2xx_ac97_pcm_out_req = { - .prio = PXAD_PRIO_LOWEST, - .drcmr = 12, -}; - static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_out = { .addr = __PREG(PCDR), .addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES, + .chan_name = "pcm_pcm_stereo_out", .maxburst = 32, - .filter_data = &pxa2xx_ac97_pcm_out_req, -}; - -static struct pxad_param pxa2xx_ac97_pcm_in_req = { - .prio = PXAD_PRIO_LOWEST, - .drcmr = 11, }; static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_in = { .addr = __PREG(PCDR), .addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES, + .chan_name = "pcm_pcm_stereo_in", .maxburst = 32, - .filter_data = &pxa2xx_ac97_pcm_in_req, }; static struct snd_pcm *pxa2xx_ac97_pcm; diff --git a/sound/arm/pxa2xx-pcm-lib.c b/sound/arm/pxa2xx-pcm-lib.c index e8da3b8ee721..dcbe7ecc1835 100644 --- a/sound/arm/pxa2xx-pcm-lib.c +++ b/sound/arm/pxa2xx-pcm-lib.c @@ -125,9 +125,9 @@ int __pxa2xx_pcm_open(struct snd_pcm_substream *substream) if (ret < 0) return ret; - return snd_dmaengine_pcm_open_request_chan(substream, - pxad_filter_fn, - dma_params->filter_data); + return snd_dmaengine_pcm_open( + substream, dma_request_slave_channel(rtd->cpu_dai->dev, + dma_params->chan_name)); } EXPORT_SYMBOL(__pxa2xx_pcm_open); diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c index 5738a0abcd6a..c52b33802bf2 100644 --- a/sound/soc/pxa/pxa2xx-ac97.c +++ b/sound/soc/pxa/pxa2xx-ac97.c @@ -68,61 +68,39 @@ static struct snd_ac97_bus_ops pxa2xx_ac97_ops = { .reset = pxa2xx_ac97_cold_reset, }; -static struct pxad_param pxa2xx_ac97_pcm_stereo_in_req = { - .prio = PXAD_PRIO_LOWEST, - .drcmr = 11, -}; - static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_stereo_in = { .addr = __PREG(PCDR), .addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES, + .chan_name = "pcm_pcm_stereo_in", .maxburst = 32, - .filter_data = &pxa2xx_ac97_pcm_stereo_in_req, -}; - -static struct pxad_param pxa2xx_ac97_pcm_stereo_out_req = { - .prio = PXAD_PRIO_LOWEST, - .drcmr = 12, }; static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_stereo_out = { .addr = __PREG(PCDR), .addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES, + .chan_name = "pcm_pcm_stereo_out", .maxburst = 32, - .filter_data = &pxa2xx_ac97_pcm_stereo_out_req, }; -static struct pxad_param pxa2xx_ac97_pcm_aux_mono_out_req = { - .prio = PXAD_PRIO_LOWEST, - .drcmr = 10, -}; static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_aux_mono_out = { .addr = __PREG(MODR), .addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES, + .chan_name = "pcm_aux_mono_out", .maxburst = 16, - .filter_data = &pxa2xx_ac97_pcm_aux_mono_out_req, }; -static struct pxad_param pxa2xx_ac97_pcm_aux_mono_in_req = { - .prio = PXAD_PRIO_LOWEST, - .drcmr = 9, -}; static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_aux_mono_in = { .addr = __PREG(MODR), .addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES, + .chan_name = "pcm_aux_mono_in", .maxburst = 16, - .filter_data = &pxa2xx_ac97_pcm_aux_mono_in_req, }; -static struct pxad_param pxa2xx_ac97_pcm_aux_mic_mono_req = { - .prio = PXAD_PRIO_LOWEST, - .drcmr = 8, -}; static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_mic_mono_in = { .addr = __PREG(MCDR), .addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES, + .chan_name = "pcm_aux_mic_mono", .maxburst = 16, - .filter_data = &pxa2xx_ac97_pcm_aux_mic_mono_req, }; static int pxa2xx_ac97_hifi_startup(struct snd_pcm_substream *substream, diff --git a/sound/soc/pxa/pxa2xx-i2s.c b/sound/soc/pxa/pxa2xx-i2s.c index 3fb60baf6eab..e7184de0de04 100644 --- a/sound/soc/pxa/pxa2xx-i2s.c +++ b/sound/soc/pxa/pxa2xx-i2s.c @@ -82,20 +82,18 @@ static struct pxa_i2s_port pxa_i2s; static struct clk *clk_i2s; static int clk_ena = 0; -static unsigned long pxa2xx_i2s_pcm_stereo_out_req = 3; static struct snd_dmaengine_dai_dma_data pxa2xx_i2s_pcm_stereo_out = { .addr = __PREG(SADR), .addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES, + .chan_name = "tx", .maxburst = 32, - .filter_data = &pxa2xx_i2s_pcm_stereo_out_req, }; -static unsigned long pxa2xx_i2s_pcm_stereo_in_req = 2; static struct snd_dmaengine_dai_dma_data pxa2xx_i2s_pcm_stereo_in = { .addr = __PREG(SADR), .addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES, + .chan_name = "rx", .maxburst = 32, - .filter_data = &pxa2xx_i2s_pcm_stereo_in_req, }; static int pxa2xx_i2s_startup(struct snd_pcm_substream *substream, -- cgit v1.2.3 From 95acb005fef2aeaeb63c20de98aca0ed5bd0efa2 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 27 Jun 2018 21:33:53 +0200 Subject: ASoC: fold pxa2xx-pcm into its only user, pxa2xx-ac97 Now that the PXA SSP bits are ported over to generic DMA, the pxa2xx-pcm code only has a single user left. This patch folds the remaining bits into its only user and removes the unnecessary glue layer along with its header file. The include dependency to linux/dma/pxa-dma.h is also gone now. Signed-off-by: Daniel Mack Signed-off-by: Mark Brown --- sound/arm/Kconfig | 5 -- sound/arm/Makefile | 3 -- sound/arm/pxa2xx-ac97.c | 114 ++++++++++++++++++++++++++------------- sound/arm/pxa2xx-pcm-lib.c | 2 - sound/arm/pxa2xx-pcm.c | 129 --------------------------------------------- sound/arm/pxa2xx-pcm.h | 27 ---------- sound/soc/pxa/pxa-ssp.c | 1 - sound/soc/pxa/pxa2xx-pcm.c | 2 - 8 files changed, 76 insertions(+), 207 deletions(-) delete mode 100644 sound/arm/pxa2xx-pcm.c delete mode 100644 sound/arm/pxa2xx-pcm.h diff --git a/sound/arm/Kconfig b/sound/arm/Kconfig index 65171f6657a2..5fbd47a9177e 100644 --- a/sound/arm/Kconfig +++ b/sound/arm/Kconfig @@ -17,14 +17,9 @@ config SND_ARMAACI select SND_PCM select SND_AC97_CODEC -config SND_PXA2XX_PCM - tristate - select SND_PCM - config SND_PXA2XX_AC97 tristate "AC97 driver for the Intel PXA2xx chip" depends on ARCH_PXA - select SND_PXA2XX_PCM select SND_AC97_CODEC select SND_PXA2XX_LIB select SND_PXA2XX_LIB_AC97 diff --git a/sound/arm/Makefile b/sound/arm/Makefile index e10d5b169565..34c769489877 100644 --- a/sound/arm/Makefile +++ b/sound/arm/Makefile @@ -6,9 +6,6 @@ obj-$(CONFIG_SND_ARMAACI) += snd-aaci.o snd-aaci-objs := aaci.o -obj-$(CONFIG_SND_PXA2XX_PCM) += snd-pxa2xx-pcm.o -snd-pxa2xx-pcm-objs := pxa2xx-pcm.o - obj-$(CONFIG_SND_PXA2XX_LIB) += snd-pxa2xx-lib.o snd-pxa2xx-lib-y := pxa2xx-pcm-lib.o snd-pxa2xx-lib-$(CONFIG_SND_PXA2XX_LIB_AC97) += pxa2xx-ac97-lib.o diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c index 236a63cdaf9f..7d8d7b7199dc 100644 --- a/sound/arm/pxa2xx-ac97.c +++ b/sound/arm/pxa2xx-ac97.c @@ -15,7 +15,7 @@ #include #include #include -#include +#include #include #include @@ -27,8 +27,6 @@ #include #include -#include "pxa2xx-pcm.h" - static void pxa2xx_ac97_legacy_reset(struct snd_ac97 *ac97) { if (!pxa2xx_ac97_try_cold_reset()) @@ -63,51 +61,46 @@ static struct snd_ac97_bus_ops pxa2xx_ac97_ops = { .reset = pxa2xx_ac97_legacy_reset, }; -static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_out = { - .addr = __PREG(PCDR), - .addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES, - .chan_name = "pcm_pcm_stereo_out", - .maxburst = 32, -}; - -static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_in = { - .addr = __PREG(PCDR), - .addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES, - .chan_name = "pcm_pcm_stereo_in", - .maxburst = 32, -}; - static struct snd_pcm *pxa2xx_ac97_pcm; static struct snd_ac97 *pxa2xx_ac97_ac97; -static int pxa2xx_ac97_pcm_startup(struct snd_pcm_substream *substream) +static int pxa2xx_ac97_pcm_open(struct snd_pcm_substream *substream) { struct snd_pcm_runtime *runtime = substream->runtime; pxa2xx_audio_ops_t *platform_ops; - int r; + int ret, i; + + ret = __pxa2xx_pcm_open(substream); + if (ret) + return ret; runtime->hw.channels_min = 2; runtime->hw.channels_max = 2; - r = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? - AC97_RATES_FRONT_DAC : AC97_RATES_ADC; - runtime->hw.rates = pxa2xx_ac97_ac97->rates[r]; + i = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? + AC97_RATES_FRONT_DAC : AC97_RATES_ADC; + runtime->hw.rates = pxa2xx_ac97_ac97->rates[i]; snd_pcm_limit_hw_rates(runtime); - platform_ops = substream->pcm->card->dev->platform_data; - if (platform_ops && platform_ops->startup) - return platform_ops->startup(substream, platform_ops->priv); - else - return 0; + platform_ops = substream->pcm->card->dev->platform_data; + if (platform_ops && platform_ops->startup) { + ret = platform_ops->startup(substream, platform_ops->priv); + if (ret < 0) + __pxa2xx_pcm_close(substream); + } + + return ret; } -static void pxa2xx_ac97_pcm_shutdown(struct snd_pcm_substream *substream) +static int pxa2xx_ac97_pcm_close(struct snd_pcm_substream *substream) { pxa2xx_audio_ops_t *platform_ops; - platform_ops = substream->pcm->card->dev->platform_data; + platform_ops = substream->pcm->card->dev->platform_data; if (platform_ops && platform_ops->shutdown) platform_ops->shutdown(substream, platform_ops->priv); + + return 0; } static int pxa2xx_ac97_pcm_prepare(struct snd_pcm_substream *substream) @@ -115,17 +108,15 @@ static int pxa2xx_ac97_pcm_prepare(struct snd_pcm_substream *substream) struct snd_pcm_runtime *runtime = substream->runtime; int reg = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? AC97_PCM_FRONT_DAC_RATE : AC97_PCM_LR_ADC_RATE; + int ret; + + ret = __pxa2xx_pcm_prepare(substream); + if (ret < 0) + return ret; + return snd_ac97_set_rate(pxa2xx_ac97_ac97, reg, runtime->rate); } -static struct pxa2xx_pcm_client pxa2xx_ac97_pcm_client = { - .playback_params = &pxa2xx_ac97_pcm_out, - .capture_params = &pxa2xx_ac97_pcm_in, - .startup = pxa2xx_ac97_pcm_startup, - .shutdown = pxa2xx_ac97_pcm_shutdown, - .prepare = pxa2xx_ac97_pcm_prepare, -}; - #ifdef CONFIG_PM_SLEEP static int pxa2xx_ac97_do_suspend(struct snd_card *card) @@ -183,6 +174,53 @@ static int pxa2xx_ac97_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(pxa2xx_ac97_pm_ops, pxa2xx_ac97_suspend, pxa2xx_ac97_resume); #endif +static const struct snd_pcm_ops pxa2xx_pcm_ops = { + .open = pxa2xx_ac97_pcm_open, + .close = pxa2xx_ac97_pcm_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = __pxa2xx_pcm_hw_params, + .hw_free = __pxa2xx_pcm_hw_free, + .prepare = pxa2xx_ac97_pcm_prepare, + .trigger = pxa2xx_pcm_trigger, + .pointer = pxa2xx_pcm_pointer, + .mmap = pxa2xx_pcm_mmap, +}; + + +static int pxa2xx_ac97_pcm_new(struct snd_card *card) +{ + struct snd_pcm *pcm; + int stream, ret; + + ret = snd_pcm_new(card, "PXA2xx-PCM", 0, 1, 1, &pcm); + if (ret) + goto out; + + pcm->private_free = pxa2xx_pcm_free_dma_buffers; + + ret = dma_coerce_mask_and_coherent(card->dev, DMA_BIT_MASK(32)); + if (ret) + goto out; + + stream = SNDRV_PCM_STREAM_PLAYBACK; + snd_pcm_set_ops(pcm, stream, &pxa2xx_pcm_ops); + ret = pxa2xx_pcm_preallocate_dma_buffer(pcm, stream); + if (ret) + goto out; + + stream = SNDRV_PCM_STREAM_CAPTURE; + snd_pcm_set_ops(pcm, stream, &pxa2xx_pcm_ops); + ret = pxa2xx_pcm_preallocate_dma_buffer(pcm, stream); + if (ret) + goto out; + + pxa2xx_ac97_pcm = pcm; + ret = 0; + + out: + return ret; +} + static int pxa2xx_ac97_probe(struct platform_device *dev) { struct snd_card *card; @@ -204,7 +242,7 @@ static int pxa2xx_ac97_probe(struct platform_device *dev) strlcpy(card->driver, dev->dev.driver->name, sizeof(card->driver)); - ret = pxa2xx_pcm_new(card, &pxa2xx_ac97_pcm_client, &pxa2xx_ac97_pcm); + ret = pxa2xx_ac97_pcm_new(card); if (ret) goto err; diff --git a/sound/arm/pxa2xx-pcm-lib.c b/sound/arm/pxa2xx-pcm-lib.c index dcbe7ecc1835..b927fa5ddbc0 100644 --- a/sound/arm/pxa2xx-pcm-lib.c +++ b/sound/arm/pxa2xx-pcm-lib.c @@ -16,8 +16,6 @@ #include #include -#include "pxa2xx-pcm.h" - static const struct snd_pcm_hardware pxa2xx_pcm_hardware = { .info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID | diff --git a/sound/arm/pxa2xx-pcm.c b/sound/arm/pxa2xx-pcm.c deleted file mode 100644 index 1c6f4b436de3..000000000000 --- a/sound/arm/pxa2xx-pcm.c +++ /dev/null @@ -1,129 +0,0 @@ -/* - * linux/sound/arm/pxa2xx-pcm.c -- ALSA PCM interface for the Intel PXA2xx chip - * - * Author: Nicolas Pitre - * Created: Nov 30, 2004 - * Copyright: (C) 2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include - -#include - -#include -#include -#include - -#include "pxa2xx-pcm.h" - -static int pxa2xx_pcm_prepare(struct snd_pcm_substream *substream) -{ - struct pxa2xx_pcm_client *client = substream->private_data; - - __pxa2xx_pcm_prepare(substream); - - return client->prepare(substream); -} - -static int pxa2xx_pcm_open(struct snd_pcm_substream *substream) -{ - struct pxa2xx_pcm_client *client = substream->private_data; - struct snd_pcm_runtime *runtime = substream->runtime; - struct pxa2xx_runtime_data *rtd; - int ret; - - ret = __pxa2xx_pcm_open(substream); - if (ret) - goto out; - - rtd = runtime->private_data; - - rtd->params = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? - client->playback_params : client->capture_params; - - ret = client->startup(substream); - if (!ret) - goto err2; - - return 0; - - err2: - __pxa2xx_pcm_close(substream); - out: - return ret; -} - -static int pxa2xx_pcm_close(struct snd_pcm_substream *substream) -{ - struct pxa2xx_pcm_client *client = substream->private_data; - - client->shutdown(substream); - - return __pxa2xx_pcm_close(substream); -} - -static const struct snd_pcm_ops pxa2xx_pcm_ops = { - .open = pxa2xx_pcm_open, - .close = pxa2xx_pcm_close, - .ioctl = snd_pcm_lib_ioctl, - .hw_params = __pxa2xx_pcm_hw_params, - .hw_free = __pxa2xx_pcm_hw_free, - .prepare = pxa2xx_pcm_prepare, - .trigger = pxa2xx_pcm_trigger, - .pointer = pxa2xx_pcm_pointer, - .mmap = pxa2xx_pcm_mmap, -}; - -int pxa2xx_pcm_new(struct snd_card *card, struct pxa2xx_pcm_client *client, - struct snd_pcm **rpcm) -{ - struct snd_pcm *pcm; - int play = client->playback_params ? 1 : 0; - int capt = client->capture_params ? 1 : 0; - int ret; - - ret = snd_pcm_new(card, "PXA2xx-PCM", 0, play, capt, &pcm); - if (ret) - goto out; - - pcm->private_data = client; - pcm->private_free = pxa2xx_pcm_free_dma_buffers; - - ret = dma_coerce_mask_and_coherent(card->dev, DMA_BIT_MASK(32)); - if (ret) - goto out; - - if (play) { - int stream = SNDRV_PCM_STREAM_PLAYBACK; - snd_pcm_set_ops(pcm, stream, &pxa2xx_pcm_ops); - ret = pxa2xx_pcm_preallocate_dma_buffer(pcm, stream); - if (ret) - goto out; - } - if (capt) { - int stream = SNDRV_PCM_STREAM_CAPTURE; - snd_pcm_set_ops(pcm, stream, &pxa2xx_pcm_ops); - ret = pxa2xx_pcm_preallocate_dma_buffer(pcm, stream); - if (ret) - goto out; - } - - if (rpcm) - *rpcm = pcm; - ret = 0; - - out: - return ret; -} - -EXPORT_SYMBOL(pxa2xx_pcm_new); - -MODULE_AUTHOR("Nicolas Pitre"); -MODULE_DESCRIPTION("Intel PXA2xx PCM DMA module"); -MODULE_LICENSE("GPL"); diff --git a/sound/arm/pxa2xx-pcm.h b/sound/arm/pxa2xx-pcm.h deleted file mode 100644 index 8fa2b7c9e6b8..000000000000 --- a/sound/arm/pxa2xx-pcm.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * linux/sound/arm/pxa2xx-pcm.h -- ALSA PCM interface for the Intel PXA2xx chip - * - * Author: Nicolas Pitre - * Created: Nov 30, 2004 - * Copyright: MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -struct pxa2xx_runtime_data { - int dma_ch; - struct snd_dmaengine_dai_dma_data *params; -}; - -struct pxa2xx_pcm_client { - struct snd_dmaengine_dai_dma_data *playback_params; - struct snd_dmaengine_dai_dma_data *capture_params; - int (*startup)(struct snd_pcm_substream *); - void (*shutdown)(struct snd_pcm_substream *); - int (*prepare)(struct snd_pcm_substream *); -}; - -extern int pxa2xx_pcm_new(struct snd_card *, struct pxa2xx_pcm_client *, struct snd_pcm **); - diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c index 0b441338bdd4..c1f4af869289 100644 --- a/sound/soc/pxa/pxa-ssp.c +++ b/sound/soc/pxa/pxa-ssp.c @@ -34,7 +34,6 @@ #include #include -#include "../../arm/pxa2xx-pcm.h" #include "pxa-ssp.h" /* diff --git a/sound/soc/pxa/pxa2xx-pcm.c b/sound/soc/pxa/pxa2xx-pcm.c index 8b6a70e94c01..445e691126e5 100644 --- a/sound/soc/pxa/pxa2xx-pcm.c +++ b/sound/soc/pxa/pxa2xx-pcm.c @@ -20,8 +20,6 @@ #include #include -#include "../../arm/pxa2xx-pcm.h" - static int pxa2xx_pcm_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) { -- cgit v1.2.3 From a7160670b5e2d6b59e0f7a5b7e5bcef3b532c24c Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 27 Jun 2018 21:33:54 +0200 Subject: ASoC: pxa: clean up function names in pxa2xx-lib Clean up the namespace a bit and drop the __ prefix of all functions exported by pxa2xx-lib. This improves the readability of the code. Signed-off-by: Daniel Mack Signed-off-by: Mark Brown --- include/sound/pxa2xx-lib.h | 10 +++++----- sound/arm/pxa2xx-ac97.c | 10 +++++----- sound/arm/pxa2xx-pcm-lib.c | 22 +++++++++++----------- sound/soc/pxa/pxa2xx-pcm.c | 21 +++++++-------------- 4 files changed, 28 insertions(+), 35 deletions(-) diff --git a/include/sound/pxa2xx-lib.h b/include/sound/pxa2xx-lib.h index 63f75450d3db..b43de38de8b2 100644 --- a/include/sound/pxa2xx-lib.h +++ b/include/sound/pxa2xx-lib.h @@ -10,14 +10,14 @@ struct snd_pcm_substream; struct snd_pcm_hw_params; struct snd_pcm; -extern int __pxa2xx_pcm_hw_params(struct snd_pcm_substream *substream, +extern int pxa2xx_pcm_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params); -extern int __pxa2xx_pcm_hw_free(struct snd_pcm_substream *substream); +extern int pxa2xx_pcm_hw_free(struct snd_pcm_substream *substream); extern int pxa2xx_pcm_trigger(struct snd_pcm_substream *substream, int cmd); extern snd_pcm_uframes_t pxa2xx_pcm_pointer(struct snd_pcm_substream *substream); -extern int __pxa2xx_pcm_prepare(struct snd_pcm_substream *substream); -extern int __pxa2xx_pcm_open(struct snd_pcm_substream *substream); -extern int __pxa2xx_pcm_close(struct snd_pcm_substream *substream); +extern int pxa2xx_pcm_prepare(struct snd_pcm_substream *substream); +extern int pxa2xx_pcm_open(struct snd_pcm_substream *substream); +extern int pxa2xx_pcm_close(struct snd_pcm_substream *substream); extern int pxa2xx_pcm_mmap(struct snd_pcm_substream *substream, struct vm_area_struct *vma); extern int pxa2xx_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, int stream); diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c index 7d8d7b7199dc..0d624337857b 100644 --- a/sound/arm/pxa2xx-ac97.c +++ b/sound/arm/pxa2xx-ac97.c @@ -70,7 +70,7 @@ static int pxa2xx_ac97_pcm_open(struct snd_pcm_substream *substream) pxa2xx_audio_ops_t *platform_ops; int ret, i; - ret = __pxa2xx_pcm_open(substream); + ret = pxa2xx_pcm_open(substream); if (ret) return ret; @@ -86,7 +86,7 @@ static int pxa2xx_ac97_pcm_open(struct snd_pcm_substream *substream) if (platform_ops && platform_ops->startup) { ret = platform_ops->startup(substream, platform_ops->priv); if (ret < 0) - __pxa2xx_pcm_close(substream); + pxa2xx_pcm_close(substream); } return ret; @@ -110,7 +110,7 @@ static int pxa2xx_ac97_pcm_prepare(struct snd_pcm_substream *substream) AC97_PCM_FRONT_DAC_RATE : AC97_PCM_LR_ADC_RATE; int ret; - ret = __pxa2xx_pcm_prepare(substream); + ret = pxa2xx_pcm_prepare(substream); if (ret < 0) return ret; @@ -178,8 +178,8 @@ static const struct snd_pcm_ops pxa2xx_pcm_ops = { .open = pxa2xx_ac97_pcm_open, .close = pxa2xx_ac97_pcm_close, .ioctl = snd_pcm_lib_ioctl, - .hw_params = __pxa2xx_pcm_hw_params, - .hw_free = __pxa2xx_pcm_hw_free, + .hw_params = pxa2xx_pcm_hw_params, + .hw_free = pxa2xx_pcm_hw_free, .prepare = pxa2xx_ac97_pcm_prepare, .trigger = pxa2xx_pcm_trigger, .pointer = pxa2xx_pcm_pointer, diff --git a/sound/arm/pxa2xx-pcm-lib.c b/sound/arm/pxa2xx-pcm-lib.c index b927fa5ddbc0..dc56dbebf441 100644 --- a/sound/arm/pxa2xx-pcm-lib.c +++ b/sound/arm/pxa2xx-pcm-lib.c @@ -33,8 +33,8 @@ static const struct snd_pcm_hardware pxa2xx_pcm_hardware = { .fifo_size = 32, }; -int __pxa2xx_pcm_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) +int pxa2xx_pcm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) { struct dma_chan *chan = snd_dmaengine_pcm_get_chan(substream); struct snd_soc_pcm_runtime *rtd = substream->private_data; @@ -62,14 +62,14 @@ int __pxa2xx_pcm_hw_params(struct snd_pcm_substream *substream, return 0; } -EXPORT_SYMBOL(__pxa2xx_pcm_hw_params); +EXPORT_SYMBOL(pxa2xx_pcm_hw_params); -int __pxa2xx_pcm_hw_free(struct snd_pcm_substream *substream) +int pxa2xx_pcm_hw_free(struct snd_pcm_substream *substream) { snd_pcm_set_runtime_buffer(substream, NULL); return 0; } -EXPORT_SYMBOL(__pxa2xx_pcm_hw_free); +EXPORT_SYMBOL(pxa2xx_pcm_hw_free); int pxa2xx_pcm_trigger(struct snd_pcm_substream *substream, int cmd) { @@ -84,13 +84,13 @@ pxa2xx_pcm_pointer(struct snd_pcm_substream *substream) } EXPORT_SYMBOL(pxa2xx_pcm_pointer); -int __pxa2xx_pcm_prepare(struct snd_pcm_substream *substream) +int pxa2xx_pcm_prepare(struct snd_pcm_substream *substream) { return 0; } -EXPORT_SYMBOL(__pxa2xx_pcm_prepare); +EXPORT_SYMBOL(pxa2xx_pcm_prepare); -int __pxa2xx_pcm_open(struct snd_pcm_substream *substream) +int pxa2xx_pcm_open(struct snd_pcm_substream *substream) { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_pcm_runtime *runtime = substream->runtime; @@ -127,13 +127,13 @@ int __pxa2xx_pcm_open(struct snd_pcm_substream *substream) substream, dma_request_slave_channel(rtd->cpu_dai->dev, dma_params->chan_name)); } -EXPORT_SYMBOL(__pxa2xx_pcm_open); +EXPORT_SYMBOL(pxa2xx_pcm_open); -int __pxa2xx_pcm_close(struct snd_pcm_substream *substream) +int pxa2xx_pcm_close(struct snd_pcm_substream *substream) { return snd_dmaengine_pcm_close_release_chan(substream); } -EXPORT_SYMBOL(__pxa2xx_pcm_close); +EXPORT_SYMBOL(pxa2xx_pcm_close); int pxa2xx_pcm_mmap(struct snd_pcm_substream *substream, struct vm_area_struct *vma) diff --git a/sound/soc/pxa/pxa2xx-pcm.c b/sound/soc/pxa/pxa2xx-pcm.c index 445e691126e5..da252d1f732e 100644 --- a/sound/soc/pxa/pxa2xx-pcm.c +++ b/sound/soc/pxa/pxa2xx-pcm.c @@ -20,8 +20,8 @@ #include #include -static int pxa2xx_pcm_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) +static int __pxa2xx_pcm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_dmaengine_dai_dma_data *dma; @@ -33,23 +33,16 @@ static int pxa2xx_pcm_hw_params(struct snd_pcm_substream *substream, if (!dma) return 0; - return __pxa2xx_pcm_hw_params(substream, params); -} - -static int pxa2xx_pcm_hw_free(struct snd_pcm_substream *substream) -{ - __pxa2xx_pcm_hw_free(substream); - - return 0; + return pxa2xx_pcm_hw_params(substream, params); } static const struct snd_pcm_ops pxa2xx_pcm_ops = { - .open = __pxa2xx_pcm_open, - .close = __pxa2xx_pcm_close, + .open = pxa2xx_pcm_open, + .close = pxa2xx_pcm_close, .ioctl = snd_pcm_lib_ioctl, - .hw_params = pxa2xx_pcm_hw_params, + .hw_params = __pxa2xx_pcm_hw_params, .hw_free = pxa2xx_pcm_hw_free, - .prepare = __pxa2xx_pcm_prepare, + .prepare = pxa2xx_pcm_prepare, .trigger = pxa2xx_pcm_trigger, .pointer = pxa2xx_pcm_pointer, .mmap = pxa2xx_pcm_mmap, -- cgit v1.2.3 From 7afd1b0b2ef9a8120951188a955010ef92bdf885 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 27 Jun 2018 21:33:55 +0200 Subject: ASoC: pxa: move some functions to pxa2xx-lib To get rid of some intermediate platform layers, move pxa2xx_soc_pcm_new() and pxa2xx_pcm_ops in pxa2xx-lib. Signed-off-by: Daniel Mack Signed-off-by: Mark Brown --- include/sound/pxa2xx-lib.h | 3 +++ sound/arm/pxa2xx-ac97.c | 6 ++--- sound/arm/pxa2xx-pcm-lib.c | 41 ++++++++++++++++++++++++++++++++++ sound/soc/pxa/pxa2xx-pcm.c | 55 ---------------------------------------------- 4 files changed, 47 insertions(+), 58 deletions(-) diff --git a/include/sound/pxa2xx-lib.h b/include/sound/pxa2xx-lib.h index b43de38de8b2..6758fc12fa84 100644 --- a/include/sound/pxa2xx-lib.h +++ b/include/sound/pxa2xx-lib.h @@ -8,6 +8,7 @@ /* PCM */ struct snd_pcm_substream; struct snd_pcm_hw_params; +struct snd_soc_pcm_runtime; struct snd_pcm; extern int pxa2xx_pcm_hw_params(struct snd_pcm_substream *substream, @@ -22,6 +23,8 @@ extern int pxa2xx_pcm_mmap(struct snd_pcm_substream *substream, struct vm_area_struct *vma); extern int pxa2xx_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, int stream); extern void pxa2xx_pcm_free_dma_buffers(struct snd_pcm *pcm); +extern int pxa2xx_soc_pcm_new(struct snd_soc_pcm_runtime *rtd); +extern const struct snd_pcm_ops pxa2xx_pcm_ops; /* AC97 */ diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c index 0d624337857b..1f72672262d0 100644 --- a/sound/arm/pxa2xx-ac97.c +++ b/sound/arm/pxa2xx-ac97.c @@ -174,7 +174,7 @@ static int pxa2xx_ac97_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(pxa2xx_ac97_pm_ops, pxa2xx_ac97_suspend, pxa2xx_ac97_resume); #endif -static const struct snd_pcm_ops pxa2xx_pcm_ops = { +static const struct snd_pcm_ops pxa2xx_ac97_pcm_ops = { .open = pxa2xx_ac97_pcm_open, .close = pxa2xx_ac97_pcm_close, .ioctl = snd_pcm_lib_ioctl, @@ -203,13 +203,13 @@ static int pxa2xx_ac97_pcm_new(struct snd_card *card) goto out; stream = SNDRV_PCM_STREAM_PLAYBACK; - snd_pcm_set_ops(pcm, stream, &pxa2xx_pcm_ops); + snd_pcm_set_ops(pcm, stream, &pxa2xx_ac97_pcm_ops); ret = pxa2xx_pcm_preallocate_dma_buffer(pcm, stream); if (ret) goto out; stream = SNDRV_PCM_STREAM_CAPTURE; - snd_pcm_set_ops(pcm, stream, &pxa2xx_pcm_ops); + snd_pcm_set_ops(pcm, stream, &pxa2xx_ac97_pcm_ops); ret = pxa2xx_pcm_preallocate_dma_buffer(pcm, stream); if (ret) goto out; diff --git a/sound/arm/pxa2xx-pcm-lib.c b/sound/arm/pxa2xx-pcm-lib.c index dc56dbebf441..add23d9b4ef6 100644 --- a/sound/arm/pxa2xx-pcm-lib.c +++ b/sound/arm/pxa2xx-pcm-lib.c @@ -179,6 +179,47 @@ void pxa2xx_pcm_free_dma_buffers(struct snd_pcm *pcm) } EXPORT_SYMBOL(pxa2xx_pcm_free_dma_buffers); +int pxa2xx_soc_pcm_new(struct snd_soc_pcm_runtime *rtd) +{ + struct snd_card *card = rtd->card->snd_card; + struct snd_pcm *pcm = rtd->pcm; + int ret; + + ret = dma_coerce_mask_and_coherent(card->dev, DMA_BIT_MASK(32)); + if (ret) + return ret; + + if (pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream) { + ret = pxa2xx_pcm_preallocate_dma_buffer(pcm, + SNDRV_PCM_STREAM_PLAYBACK); + if (ret) + goto out; + } + + if (pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream) { + ret = pxa2xx_pcm_preallocate_dma_buffer(pcm, + SNDRV_PCM_STREAM_CAPTURE); + if (ret) + goto out; + } + out: + return ret; +} +EXPORT_SYMBOL(pxa2xx_soc_pcm_new); + +const struct snd_pcm_ops pxa2xx_pcm_ops = { + .open = pxa2xx_pcm_open, + .close = pxa2xx_pcm_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = pxa2xx_pcm_hw_params, + .hw_free = pxa2xx_pcm_hw_free, + .prepare = pxa2xx_pcm_prepare, + .trigger = pxa2xx_pcm_trigger, + .pointer = pxa2xx_pcm_pointer, + .mmap = pxa2xx_pcm_mmap, +}; +EXPORT_SYMBOL(pxa2xx_pcm_ops); + MODULE_AUTHOR("Nicolas Pitre"); MODULE_DESCRIPTION("Intel PXA2xx sound library"); MODULE_LICENSE("GPL"); diff --git a/sound/soc/pxa/pxa2xx-pcm.c b/sound/soc/pxa/pxa2xx-pcm.c index da252d1f732e..a1df4ec76cbd 100644 --- a/sound/soc/pxa/pxa2xx-pcm.c +++ b/sound/soc/pxa/pxa2xx-pcm.c @@ -20,61 +20,6 @@ #include #include -static int __pxa2xx_pcm_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_dmaengine_dai_dma_data *dma; - - dma = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream); - - /* return if this is a bufferless transfer e.g. - * codec <--> BT codec or GSM modem -- lg FIXME */ - if (!dma) - return 0; - - return pxa2xx_pcm_hw_params(substream, params); -} - -static const struct snd_pcm_ops pxa2xx_pcm_ops = { - .open = pxa2xx_pcm_open, - .close = pxa2xx_pcm_close, - .ioctl = snd_pcm_lib_ioctl, - .hw_params = __pxa2xx_pcm_hw_params, - .hw_free = pxa2xx_pcm_hw_free, - .prepare = pxa2xx_pcm_prepare, - .trigger = pxa2xx_pcm_trigger, - .pointer = pxa2xx_pcm_pointer, - .mmap = pxa2xx_pcm_mmap, -}; - -static int pxa2xx_soc_pcm_new(struct snd_soc_pcm_runtime *rtd) -{ - struct snd_card *card = rtd->card->snd_card; - struct snd_pcm *pcm = rtd->pcm; - int ret; - - ret = dma_coerce_mask_and_coherent(card->dev, DMA_BIT_MASK(32)); - if (ret) - return ret; - - if (pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream) { - ret = pxa2xx_pcm_preallocate_dma_buffer(pcm, - SNDRV_PCM_STREAM_PLAYBACK); - if (ret) - goto out; - } - - if (pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream) { - ret = pxa2xx_pcm_preallocate_dma_buffer(pcm, - SNDRV_PCM_STREAM_CAPTURE); - if (ret) - goto out; - } - out: - return ret; -} - static const struct snd_soc_component_driver pxa2xx_soc_platform = { .ops = &pxa2xx_pcm_ops, .pcm_new = pxa2xx_soc_pcm_new, -- cgit v1.2.3 From 456ec80876564edb74a0fff78499beb7ca286302 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 27 Jun 2018 21:33:56 +0200 Subject: ASoC: pxa2xx-pcm-lib: fix indenting While at it, also fix some indenting. Signed-off-by: Daniel Mack Signed-off-by: Mark Brown --- sound/arm/pxa2xx-pcm-lib.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/arm/pxa2xx-pcm-lib.c b/sound/arm/pxa2xx-pcm-lib.c index add23d9b4ef6..7931789d4a9f 100644 --- a/sound/arm/pxa2xx-pcm-lib.c +++ b/sound/arm/pxa2xx-pcm-lib.c @@ -23,8 +23,8 @@ static const struct snd_pcm_hardware pxa2xx_pcm_hardware = { SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME, .formats = SNDRV_PCM_FMTBIT_S16_LE | - SNDRV_PCM_FMTBIT_S24_LE | - SNDRV_PCM_FMTBIT_S32_LE, + SNDRV_PCM_FMTBIT_S24_LE | + SNDRV_PCM_FMTBIT_S32_LE, .period_bytes_min = 32, .period_bytes_max = 8192 - 32, .periods_min = 1, -- cgit v1.2.3 From d767d3ce5c48b3378e20e8cfd5d5379c4ca6001b Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 27 Jun 2018 21:33:57 +0200 Subject: ASoC: pxa: provide PCM ops for ssp, i2s and ac97 components Now that the functions are now available through pxa2xx-lib, hook them up to pxa-sspi, pxa-ac97 and pxa-i2s. This allows DT platforms to use the DAIs without a platform driver. Signed-off-by: Daniel Mack Signed-off-by: Mark Brown --- sound/soc/pxa/pxa-ssp.c | 3 +++ sound/soc/pxa/pxa2xx-ac97.c | 3 +++ sound/soc/pxa/pxa2xx-i2s.c | 3 +++ 3 files changed, 9 insertions(+) diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c index c1f4af869289..01d54697ede4 100644 --- a/sound/soc/pxa/pxa-ssp.c +++ b/sound/soc/pxa/pxa-ssp.c @@ -841,6 +841,9 @@ static struct snd_soc_dai_driver pxa_ssp_dai = { static const struct snd_soc_component_driver pxa_ssp_component = { .name = "pxa-ssp", + .ops = &pxa2xx_pcm_ops, + .pcm_new = pxa2xx_soc_pcm_new, + .pcm_free = pxa2xx_pcm_free_dma_buffers, }; #ifdef CONFIG_OF diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c index c52b33802bf2..9f779657bc86 100644 --- a/sound/soc/pxa/pxa2xx-ac97.c +++ b/sound/soc/pxa/pxa2xx-ac97.c @@ -214,6 +214,9 @@ static struct snd_soc_dai_driver pxa_ac97_dai_driver[] = { static const struct snd_soc_component_driver pxa_ac97_component = { .name = "pxa-ac97", + .ops = &pxa2xx_pcm_ops, + .pcm_new = pxa2xx_soc_pcm_new, + .pcm_free = pxa2xx_pcm_free_dma_buffers, }; #ifdef CONFIG_OF diff --git a/sound/soc/pxa/pxa2xx-i2s.c b/sound/soc/pxa/pxa2xx-i2s.c index e7184de0de04..42820121e5b9 100644 --- a/sound/soc/pxa/pxa2xx-i2s.c +++ b/sound/soc/pxa/pxa2xx-i2s.c @@ -364,6 +364,9 @@ static struct snd_soc_dai_driver pxa_i2s_dai = { static const struct snd_soc_component_driver pxa_i2s_component = { .name = "pxa-i2s", + .ops = &pxa2xx_pcm_ops, + .pcm_new = pxa2xx_soc_pcm_new, + .pcm_free = pxa2xx_pcm_free_dma_buffers, }; static int pxa2xx_i2s_drv_probe(struct platform_device *pdev) -- cgit v1.2.3 From c7b4f15ddb4f28451679019374027f5223c616ce Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 27 Jun 2018 21:33:58 +0200 Subject: ASoC: pxa: remove bindings from pxa2xx-pcm This platform is no longer needed on DT boards, so let's remove them to avoid confusion. DT bindings should use the CPU DAIs (I2S/SSP/AC97) directly. Signed-off-by: Daniel Mack Signed-off-by: Mark Brown --- .../devicetree/bindings/sound/mrvl,pxa2xx-pcm.txt | 15 --------------- sound/soc/pxa/pxa2xx-pcm.c | 9 --------- 2 files changed, 24 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/mrvl,pxa2xx-pcm.txt diff --git a/Documentation/devicetree/bindings/sound/mrvl,pxa2xx-pcm.txt b/Documentation/devicetree/bindings/sound/mrvl,pxa2xx-pcm.txt deleted file mode 100644 index 551fbb8348c2..000000000000 --- a/Documentation/devicetree/bindings/sound/mrvl,pxa2xx-pcm.txt +++ /dev/null @@ -1,15 +0,0 @@ -DT bindings for ARM PXA2xx PCM platform driver - -This is just a dummy driver that registers the PXA ASoC platform driver. -It does not have any resources assigned. - -Required properties: - - - compatible 'mrvl,pxa-pcm-audio' - -Example: - - pxa_pcm_audio: snd_soc_pxa_audio { - compatible = "mrvl,pxa-pcm-audio"; - }; - diff --git a/sound/soc/pxa/pxa2xx-pcm.c b/sound/soc/pxa/pxa2xx-pcm.c index a1df4ec76cbd..72eaaef1b426 100644 --- a/sound/soc/pxa/pxa2xx-pcm.c +++ b/sound/soc/pxa/pxa2xx-pcm.c @@ -32,18 +32,9 @@ static int pxa2xx_soc_platform_probe(struct platform_device *pdev) NULL, 0); } -#ifdef CONFIG_OF -static const struct of_device_id snd_soc_pxa_audio_match[] = { - { .compatible = "mrvl,pxa-pcm-audio" }, - { } -}; -MODULE_DEVICE_TABLE(of, snd_soc_pxa_audio_match); -#endif - static struct platform_driver pxa_pcm_driver = { .driver = { .name = "pxa-pcm-audio", - .of_match_table = of_match_ptr(snd_soc_pxa_audio_match), }, .probe = pxa2xx_soc_platform_probe, -- cgit v1.2.3 From 0a94cf3457408058f894cc4d95e58d8e18eb7f75 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 27 Jun 2018 21:33:59 +0200 Subject: ASoC: pxa: make SND_PXA2XX_SOC_I2S selectable Signed-off-by: Daniel Mack Signed-off-by: Mark Brown --- sound/soc/pxa/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig index 960744e46edc..95dcf97a6271 100644 --- a/sound/soc/pxa/Kconfig +++ b/sound/soc/pxa/Kconfig @@ -31,7 +31,7 @@ config SND_PXA2XX_SOC_I2S tristate config SND_PXA_SOC_SSP - tristate + tristate "Soc Audio via PXA2xx/PXA3xx SSP ports" select PXA_SSP config SND_MMP_SOC_SSPA -- cgit v1.2.3 From f11c5db770ab675d270cb4d5a2bb90923066ef49 Mon Sep 17 00:00:00 2001 From: KaiChieh Chuang Date: Fri, 29 Jun 2018 20:29:44 +0800 Subject: ASoC: mediatek: sub dai use list_head use list_head for sub_dais, since original sub_dais array is sparsely occupied Signed-off-by: KaiChieh Chuang Signed-off-by: Mark Brown --- .../soc/mediatek/common/mtk-afe-platform-driver.c | 64 ++++++++-------------- sound/soc/mediatek/common/mtk-base-afe.h | 6 +- 2 files changed, 28 insertions(+), 42 deletions(-) diff --git a/sound/soc/mediatek/common/mtk-afe-platform-driver.c b/sound/soc/mediatek/common/mtk-afe-platform-driver.c index 51ec4ff6ed95..697aa50aff9a 100644 --- a/sound/soc/mediatek/common/mtk-afe-platform-driver.c +++ b/sound/soc/mediatek/common/mtk-afe-platform-driver.c @@ -15,20 +15,12 @@ int mtk_afe_combine_sub_dai(struct mtk_base_afe *afe) { - struct snd_soc_dai_driver *sub_dai_drivers; + struct mtk_base_afe_dai *dai; size_t num_dai_drivers = 0, dai_idx = 0; - int i; - - if (!afe->sub_dais) { - dev_err(afe->dev, "%s(), sub_dais == NULL\n", __func__); - return -EINVAL; - } /* calcualte total dai driver size */ - for (i = 0; i < afe->num_sub_dais; i++) { - if (afe->sub_dais[i].dai_drivers && - afe->sub_dais[i].num_dai_drivers != 0) - num_dai_drivers += afe->sub_dais[i].num_dai_drivers; + list_for_each_entry(dai, &afe->sub_dais, list) { + num_dai_drivers += dai->num_dai_drivers; } dev_info(afe->dev, "%s(), num of dai %zd\n", __func__, num_dai_drivers); @@ -42,19 +34,14 @@ int mtk_afe_combine_sub_dai(struct mtk_base_afe *afe) if (!afe->dai_drivers) return -ENOMEM; - for (i = 0; i < afe->num_sub_dais; i++) { - if (afe->sub_dais[i].dai_drivers && - afe->sub_dais[i].num_dai_drivers != 0) { - sub_dai_drivers = afe->sub_dais[i].dai_drivers; - /* dai driver */ - memcpy(&afe->dai_drivers[dai_idx], - sub_dai_drivers, - afe->sub_dais[i].num_dai_drivers * - sizeof(struct snd_soc_dai_driver)); - dai_idx += afe->sub_dais[i].num_dai_drivers; - } + list_for_each_entry(dai, &afe->sub_dais, list) { + /* dai driver */ + memcpy(&afe->dai_drivers[dai_idx], + dai->dai_drivers, + dai->num_dai_drivers * + sizeof(struct snd_soc_dai_driver)); + dai_idx += dai->num_dai_drivers; } - return 0; } EXPORT_SYMBOL_GPL(mtk_afe_combine_sub_dai); @@ -62,28 +49,25 @@ EXPORT_SYMBOL_GPL(mtk_afe_combine_sub_dai); int mtk_afe_add_sub_dai_control(struct snd_soc_component *component) { struct mtk_base_afe *afe = snd_soc_component_get_drvdata(component); - int i; + struct mtk_base_afe_dai *dai; - if (!afe->sub_dais) { - dev_err(afe->dev, "%s(), sub_dais == NULL\n", __func__); - return -EINVAL; - } - - for (i = 0; i < afe->num_sub_dais; i++) { - if (afe->sub_dais[i].controls) + list_for_each_entry(dai, &afe->sub_dais, list) { + if (dai->controls) snd_soc_add_component_controls(component, - afe->sub_dais[i].controls, - afe->sub_dais[i].num_controls); + dai->controls, + dai->num_controls); - if (afe->sub_dais[i].dapm_widgets) + if (dai->dapm_widgets) snd_soc_dapm_new_controls(&component->dapm, - afe->sub_dais[i].dapm_widgets, - afe->sub_dais[i].num_dapm_widgets); - - if (afe->sub_dais[i].dapm_routes) + dai->dapm_widgets, + dai->num_dapm_widgets); + } + /* add routes after all widgets are added */ + list_for_each_entry(dai, &afe->sub_dais, list) { + if (dai->dapm_routes) snd_soc_dapm_add_routes(&component->dapm, - afe->sub_dais[i].dapm_routes, - afe->sub_dais[i].num_dapm_routes); + dai->dapm_routes, + dai->num_dapm_routes); } snd_soc_dapm_new_widgets(component->dapm.card); diff --git a/sound/soc/mediatek/common/mtk-base-afe.h b/sound/soc/mediatek/common/mtk-base-afe.h index bcf562f029b6..bd8d5e0c6843 100644 --- a/sound/soc/mediatek/common/mtk-base-afe.h +++ b/sound/soc/mediatek/common/mtk-base-afe.h @@ -46,6 +46,7 @@ struct mtk_base_irq_data { }; struct device; +struct list_head; struct mtk_base_afe_memif; struct mtk_base_afe_irq; struct mtk_base_afe_dai; @@ -72,8 +73,7 @@ struct mtk_base_afe { struct mtk_base_afe_irq *irqs; int irqs_size; - struct mtk_base_afe_dai *sub_dais; - int num_sub_dais; + struct list_head sub_dais; struct snd_soc_dai_driver *dai_drivers; unsigned int num_dai_drivers; @@ -110,6 +110,8 @@ struct mtk_base_afe_dai { unsigned int num_dapm_widgets; const struct snd_soc_dapm_route *dapm_routes; unsigned int num_dapm_routes; + + struct list_head list; }; #endif -- cgit v1.2.3 From c1d9b4196ba6b311bd48a9320cd46aa125e0b034 Mon Sep 17 00:00:00 2001 From: KaiChieh Chuang Date: Fri, 29 Jun 2018 20:29:45 +0800 Subject: ASoC: mt6797: sub dai use list_head Signed-off-by: KaiChieh Chuang Signed-off-by: Mark Brown --- sound/soc/mediatek/mt6797/mt6797-afe-common.h | 1 + sound/soc/mediatek/mt6797/mt6797-afe-pcm.c | 65 +++++++++++++++++-------- sound/soc/mediatek/mt6797/mt6797-dai-adda.c | 20 +++++--- sound/soc/mediatek/mt6797/mt6797-dai-hostless.c | 16 ++++-- sound/soc/mediatek/mt6797/mt6797-dai-pcm.c | 19 +++++--- 5 files changed, 81 insertions(+), 40 deletions(-) diff --git a/sound/soc/mediatek/mt6797/mt6797-afe-common.h b/sound/soc/mediatek/mt6797/mt6797-afe-common.h index 22eb7b455cf1..4eac9977b2b0 100644 --- a/sound/soc/mediatek/mt6797/mt6797-afe-common.h +++ b/sound/soc/mediatek/mt6797/mt6797-afe-common.h @@ -10,6 +10,7 @@ #define _MT_6797_AFE_COMMON_H_ #include +#include #include #include "../common/mtk-base-afe.h" diff --git a/sound/soc/mediatek/mt6797/mt6797-afe-pcm.c b/sound/soc/mediatek/mt6797/mt6797-afe-pcm.c index 6c5dd9fc9976..192f4d7b37b6 100644 --- a/sound/soc/mediatek/mt6797/mt6797-afe-pcm.c +++ b/sound/soc/mediatek/mt6797/mt6797-afe-pcm.c @@ -733,6 +733,34 @@ static const struct snd_soc_component_driver mt6797_afe_component = { .probe = mt6797_afe_component_probe, }; +static int mt6797_dai_memif_register(struct mtk_base_afe *afe) +{ + struct mtk_base_afe_dai *dai; + + dai = devm_kzalloc(afe->dev, sizeof(*dai), GFP_KERNEL); + if (!dai) + return -ENOMEM; + + list_add(&dai->list, &afe->sub_dais); + + dai->dai_drivers = mt6797_memif_dai_driver; + dai->num_dai_drivers = ARRAY_SIZE(mt6797_memif_dai_driver); + + dai->dapm_widgets = mt6797_memif_widgets; + dai->num_dapm_widgets = ARRAY_SIZE(mt6797_memif_widgets); + dai->dapm_routes = mt6797_memif_routes; + dai->num_dapm_routes = ARRAY_SIZE(mt6797_memif_routes); + return 0; +} + +typedef int (*dai_register_cb)(struct mtk_base_afe *); +static const dai_register_cb dai_register_cbs[] = { + mt6797_dai_adda_register, + mt6797_dai_pcm_register, + mt6797_dai_hostless_register, + mt6797_dai_memif_register, +}; + static int mt6797_afe_pcm_dev_probe(struct platform_device *pdev) { struct mtk_base_afe *afe; @@ -811,29 +839,24 @@ static int mt6797_afe_pcm_dev_probe(struct platform_device *pdev) } /* init sub_dais */ - afe->num_sub_dais = MT6797_DAI_NUM; - afe->sub_dais = devm_kcalloc(dev, afe->num_sub_dais, - sizeof(*afe->sub_dais), - GFP_KERNEL); - if (!afe->sub_dais) - return -ENOMEM; - - mt6797_dai_adda_register(afe); - mt6797_dai_pcm_register(afe); - mt6797_dai_hostless_register(afe); - - afe->sub_dais[MT6797_MEMIF_DL1].dai_drivers = mt6797_memif_dai_driver; - afe->sub_dais[MT6797_MEMIF_DL1].num_dai_drivers = - ARRAY_SIZE(mt6797_memif_dai_driver); - afe->sub_dais[MT6797_MEMIF_DL1].dapm_widgets = mt6797_memif_widgets; - afe->sub_dais[MT6797_MEMIF_DL1].num_dapm_widgets = - ARRAY_SIZE(mt6797_memif_widgets); - afe->sub_dais[MT6797_MEMIF_DL1].dapm_routes = mt6797_memif_routes; - afe->sub_dais[MT6797_MEMIF_DL1].num_dapm_routes = - ARRAY_SIZE(mt6797_memif_routes); + INIT_LIST_HEAD(&afe->sub_dais); + + for (i = 0; i < ARRAY_SIZE(dai_register_cbs); i++) { + ret = dai_register_cbs[i](afe); + if (ret) { + dev_warn(afe->dev, "dai register i %d fail, ret %d\n", + i, ret); + return ret; + } + } /* init dai_driver and component_driver */ - mtk_afe_combine_sub_dai(afe); + ret = mtk_afe_combine_sub_dai(afe); + if (ret) { + dev_warn(afe->dev, "mtk_afe_combine_sub_dai fail, ret %d\n", + ret); + return ret; + } afe->mtk_afe_hardware = &mt6797_afe_hardware; afe->memif_fs = mt6797_memif_fs; diff --git a/sound/soc/mediatek/mt6797/mt6797-dai-adda.c b/sound/soc/mediatek/mt6797/mt6797-dai-adda.c index ad083265ce94..0ac6409c6d61 100644 --- a/sound/soc/mediatek/mt6797/mt6797-dai-adda.c +++ b/sound/soc/mediatek/mt6797/mt6797-dai-adda.c @@ -383,14 +383,20 @@ static struct snd_soc_dai_driver mtk_dai_adda_driver[] = { int mt6797_dai_adda_register(struct mtk_base_afe *afe) { - int id = MT6797_DAI_ADDA; + struct mtk_base_afe_dai *dai; - afe->sub_dais[id].dai_drivers = mtk_dai_adda_driver; - afe->sub_dais[id].num_dai_drivers = ARRAY_SIZE(mtk_dai_adda_driver); + dai = devm_kzalloc(afe->dev, sizeof(*dai), GFP_KERNEL); + if (!dai) + return -ENOMEM; - afe->sub_dais[id].dapm_widgets = mtk_dai_adda_widgets; - afe->sub_dais[id].num_dapm_widgets = ARRAY_SIZE(mtk_dai_adda_widgets); - afe->sub_dais[id].dapm_routes = mtk_dai_adda_routes; - afe->sub_dais[id].num_dapm_routes = ARRAY_SIZE(mtk_dai_adda_routes); + list_add(&dai->list, &afe->sub_dais); + + dai->dai_drivers = mtk_dai_adda_driver; + dai->num_dai_drivers = ARRAY_SIZE(mtk_dai_adda_driver); + + dai->dapm_widgets = mtk_dai_adda_widgets; + dai->num_dapm_widgets = ARRAY_SIZE(mtk_dai_adda_widgets); + dai->dapm_routes = mtk_dai_adda_routes; + dai->num_dapm_routes = ARRAY_SIZE(mtk_dai_adda_routes); return 0; } diff --git a/sound/soc/mediatek/mt6797/mt6797-dai-hostless.c b/sound/soc/mediatek/mt6797/mt6797-dai-hostless.c index 4cf985b15a11..ed23e6a53b08 100644 --- a/sound/soc/mediatek/mt6797/mt6797-dai-hostless.c +++ b/sound/soc/mediatek/mt6797/mt6797-dai-hostless.c @@ -100,13 +100,19 @@ static struct snd_soc_dai_driver mtk_dai_hostless_driver[] = { int mt6797_dai_hostless_register(struct mtk_base_afe *afe) { - int id = MT6797_DAI_HOSTLESS_LPBK; + struct mtk_base_afe_dai *dai; - afe->sub_dais[id].dai_drivers = mtk_dai_hostless_driver; - afe->sub_dais[id].num_dai_drivers = ARRAY_SIZE(mtk_dai_hostless_driver); + dai = devm_kzalloc(afe->dev, sizeof(*dai), GFP_KERNEL); + if (!dai) + return -ENOMEM; - afe->sub_dais[id].dapm_routes = mtk_dai_hostless_routes; - afe->sub_dais[id].num_dapm_routes = ARRAY_SIZE(mtk_dai_hostless_routes); + list_add(&dai->list, &afe->sub_dais); + + dai->dai_drivers = mtk_dai_hostless_driver; + dai->num_dai_drivers = ARRAY_SIZE(mtk_dai_hostless_driver); + + dai->dapm_routes = mtk_dai_hostless_routes; + dai->num_dapm_routes = ARRAY_SIZE(mtk_dai_hostless_routes); return 0; } diff --git a/sound/soc/mediatek/mt6797/mt6797-dai-pcm.c b/sound/soc/mediatek/mt6797/mt6797-dai-pcm.c index 16d5b5067204..3136f0bc7827 100644 --- a/sound/soc/mediatek/mt6797/mt6797-dai-pcm.c +++ b/sound/soc/mediatek/mt6797/mt6797-dai-pcm.c @@ -298,15 +298,20 @@ static struct snd_soc_dai_driver mtk_dai_pcm_driver[] = { int mt6797_dai_pcm_register(struct mtk_base_afe *afe) { - int id = MT6797_DAI_PCM_1; + struct mtk_base_afe_dai *dai; - afe->sub_dais[id].dai_drivers = mtk_dai_pcm_driver; - afe->sub_dais[id].num_dai_drivers = ARRAY_SIZE(mtk_dai_pcm_driver); + dai = devm_kzalloc(afe->dev, sizeof(*dai), GFP_KERNEL); + if (!dai) + return -ENOMEM; - afe->sub_dais[id].dapm_widgets = mtk_dai_pcm_widgets; - afe->sub_dais[id].num_dapm_widgets = ARRAY_SIZE(mtk_dai_pcm_widgets); - afe->sub_dais[id].dapm_routes = mtk_dai_pcm_routes; - afe->sub_dais[id].num_dapm_routes = ARRAY_SIZE(mtk_dai_pcm_routes); + list_add(&dai->list, &afe->sub_dais); + dai->dai_drivers = mtk_dai_pcm_driver; + dai->num_dai_drivers = ARRAY_SIZE(mtk_dai_pcm_driver); + + dai->dapm_widgets = mtk_dai_pcm_widgets; + dai->num_dapm_widgets = ARRAY_SIZE(mtk_dai_pcm_widgets); + dai->dapm_routes = mtk_dai_pcm_routes; + dai->num_dapm_routes = ARRAY_SIZE(mtk_dai_pcm_routes); return 0; } -- cgit v1.2.3 From d573454d9b4f00061da314460908e19476d2ff6d Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 2 Jul 2018 06:30:28 +0000 Subject: ASoC: simple-card: convert to SPDX identifiers Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- include/sound/simple_card.h | 7 ++----- sound/soc/generic/simple-card.c | 17 +++++++---------- 2 files changed, 9 insertions(+), 15 deletions(-) diff --git a/include/sound/simple_card.h b/include/sound/simple_card.h index a6a2e1547092..d264e5463f22 100644 --- a/include/sound/simple_card.h +++ b/include/sound/simple_card.h @@ -1,12 +1,9 @@ -/* +/* SPDX-License-Identifier: GPL-2.0 + * * ASoC simple sound card support * * Copyright (C) 2012 Renesas Solutions Corp. * Kuninori Morimoto - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __SIMPLE_CARD_H diff --git a/sound/soc/generic/simple-card.c b/sound/soc/generic/simple-card.c index c5b6e04cd926..64bf3560c1d1 100644 --- a/sound/soc/generic/simple-card.c +++ b/sound/soc/generic/simple-card.c @@ -1,13 +1,10 @@ -/* - * ASoC simple sound card support - * - * Copyright (C) 2012 Renesas Solutions Corp. - * Kuninori Morimoto - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// ASoC simple sound card support +// +// Copyright (C) 2012 Renesas Solutions Corp. +// Kuninori Morimoto + #include #include #include -- cgit v1.2.3 From d613a7f45ebb2f113444630fcbbb8a074c741998 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 2 Jul 2018 06:30:44 +0000 Subject: ASoC: simple-card-utils: convert to SPDX identifiers Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- include/sound/simple_card_utils.h | 8 +++----- sound/soc/generic/simple-card-utils.c | 15 ++++++--------- 2 files changed, 9 insertions(+), 14 deletions(-) diff --git a/include/sound/simple_card_utils.h b/include/sound/simple_card_utils.h index f82acef3b992..8bc5e2d8b13c 100644 --- a/include/sound/simple_card_utils.h +++ b/include/sound/simple_card_utils.h @@ -1,12 +1,10 @@ -/* +/* SPDX-License-Identifier: GPL-2.0 + * * simple_card_utils.h * * Copyright (c) 2016 Kuninori Morimoto - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ + #ifndef __SIMPLE_CARD_UTILS_H #define __SIMPLE_CARD_UTILS_H diff --git a/sound/soc/generic/simple-card-utils.c b/sound/soc/generic/simple-card-utils.c index 4398c9580929..d3f3f0fec74c 100644 --- a/sound/soc/generic/simple-card-utils.c +++ b/sound/soc/generic/simple-card-utils.c @@ -1,12 +1,9 @@ -/* - * simple-card-utils.c - * - * Copyright (c) 2016 Kuninori Morimoto - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// simple-card-utils.c +// +// Copyright (c) 2016 Kuninori Morimoto + #include #include #include -- cgit v1.2.3 From 9afe58f1cbd1fb5e9426483656ae6f65de4130e4 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 2 Jul 2018 06:30:58 +0000 Subject: ASoC: simple-scu-card.c: convert to SPDX identifiers Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- sound/soc/generic/simple-scu-card.c | 21 +++++++++------------ 1 file changed, 9 insertions(+), 12 deletions(-) diff --git a/sound/soc/generic/simple-scu-card.c b/sound/soc/generic/simple-scu-card.c index 487716559deb..16a83bc51e0e 100644 --- a/sound/soc/generic/simple-scu-card.c +++ b/sound/soc/generic/simple-scu-card.c @@ -1,15 +1,12 @@ -/* - * ASoC simple SCU sound card support - * - * Copyright (C) 2015 Renesas Solutions Corp. - * Kuninori Morimoto - * - * based on ${LINUX}/sound/soc/generic/simple-card.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// ASoC simple SCU sound card support +// +// Copyright (C) 2015 Renesas Solutions Corp. +// Kuninori Morimoto +// +// based on ${LINUX}/sound/soc/generic/simple-card.c + #include #include #include -- cgit v1.2.3 From decd896121f965db2fdee0f0475c3e404746b333 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 2 Jul 2018 06:31:16 +0000 Subject: ASoC: audio-graph-card.c: convert to SPDX identifiers Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- sound/soc/generic/audio-graph-card.c | 21 +++++++++------------ 1 file changed, 9 insertions(+), 12 deletions(-) diff --git a/sound/soc/generic/audio-graph-card.c b/sound/soc/generic/audio-graph-card.c index a2a3e630f11c..2094d2c8919f 100644 --- a/sound/soc/generic/audio-graph-card.c +++ b/sound/soc/generic/audio-graph-card.c @@ -1,15 +1,12 @@ -/* - * ASoC audio graph sound card support - * - * Copyright (C) 2016 Renesas Solutions Corp. - * Kuninori Morimoto - * - * based on ${LINUX}/sound/soc/generic/simple-card.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// ASoC audio graph sound card support +// +// Copyright (C) 2016 Renesas Solutions Corp. +// Kuninori Morimoto +// +// based on ${LINUX}/sound/soc/generic/simple-card.c + #include #include #include -- cgit v1.2.3 From ac204c9b030fe2d27cf3a63386811254d99b3ce4 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 2 Jul 2018 06:31:33 +0000 Subject: ASoC: audio-graph-scu-card.c: convert to SPDX identifiers Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- sound/soc/generic/audio-graph-scu-card.c | 25 +++++++++++-------------- 1 file changed, 11 insertions(+), 14 deletions(-) diff --git a/sound/soc/generic/audio-graph-scu-card.c b/sound/soc/generic/audio-graph-scu-card.c index 095ef6426d42..92882e392d6c 100644 --- a/sound/soc/generic/audio-graph-scu-card.c +++ b/sound/soc/generic/audio-graph-scu-card.c @@ -1,17 +1,14 @@ -/* - * ASoC audio graph SCU sound card support - * - * Copyright (C) 2017 Renesas Solutions Corp. - * Kuninori Morimoto - * - * based on - * ${LINUX}/sound/soc/generic/simple-scu-card.c - * ${LINUX}/sound/soc/generic/audio-graph-card.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// ASoC audio graph SCU sound card support +// +// Copyright (C) 2017 Renesas Solutions Corp. +// Kuninori Morimoto +// +// based on +// ${LINUX}/sound/soc/generic/simple-scu-card.c +// ${LINUX}/sound/soc/generic/audio-graph-card.c + #include #include #include -- cgit v1.2.3 From d1aaa2e68619ca4c1cc05ce7bc029cda5a8cbe87 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 2 Jul 2018 06:21:54 +0000 Subject: ASoC: soc-io.c: convert to SPDX identifiers Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- sound/soc/soc-io.c | 19 +++++++------------ 1 file changed, 7 insertions(+), 12 deletions(-) diff --git a/sound/soc/soc-io.c b/sound/soc/soc-io.c index 026cd5347e53..1ff9175e9d5e 100644 --- a/sound/soc/soc-io.c +++ b/sound/soc/soc-io.c @@ -1,15 +1,10 @@ -/* - * soc-io.c -- ASoC register I/O helpers - * - * Copyright 2009-2011 Wolfson Microelectronics PLC. - * - * Author: Mark Brown - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// soc-io.c -- ASoC register I/O helpers +// +// Copyright 2009-2011 Wolfson Microelectronics PLC. +// +// Author: Mark Brown #include #include -- cgit v1.2.3 From e2cfd2c9673f4e9d08971fed53fe1f41d8270ef0 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 2 Jul 2018 06:22:15 +0000 Subject: ASoC: soc-dai.h: convert to SPDX identifiers Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- include/sound/soc-dai.h | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/include/sound/soc-dai.h b/include/sound/soc-dai.h index e6f8c40ed43c..a14bc0608ae9 100644 --- a/include/sound/soc-dai.h +++ b/include/sound/soc-dai.h @@ -1,12 +1,9 @@ -/* +/* SPDX-License-Identifier: GPL-2.0 + * * linux/sound/soc-dai.h -- ALSA SoC Layer * * Copyright: 2005-2008 Wolfson Microelectronics. PLC. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Digital Audio Interface (DAI) API. */ -- cgit v1.2.3 From 4eef5a90ca8b2aab61c98853141f9242af4a8339 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 2 Jul 2018 06:22:30 +0000 Subject: ASoC: soc-ops.c: convert to SPDX identifiers Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- sound/soc/soc-ops.c | 29 ++++++++++++----------------- 1 file changed, 12 insertions(+), 17 deletions(-) diff --git a/sound/soc/soc-ops.c b/sound/soc/soc-ops.c index 7144a51ddfa9..592efb370c44 100644 --- a/sound/soc/soc-ops.c +++ b/sound/soc/soc-ops.c @@ -1,20 +1,15 @@ -/* - * soc-ops.c -- Generic ASoC operations - * - * Copyright 2005 Wolfson Microelectronics PLC. - * Copyright 2005 Openedhand Ltd. - * Copyright (C) 2010 Slimlogic Ltd. - * Copyright (C) 2010 Texas Instruments Inc. - * - * Author: Liam Girdwood - * with code, comments and ideas from :- - * Richard Purdie - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// soc-ops.c -- Generic ASoC operations +// +// Copyright 2005 Wolfson Microelectronics PLC. +// Copyright 2005 Openedhand Ltd. +// Copyright (C) 2010 Slimlogic Ltd. +// Copyright (C) 2010 Texas Instruments Inc. +// +// Author: Liam Girdwood +// with code, comments and ideas from :- +// Richard Purdie #include #include -- cgit v1.2.3 From ed51758247c51dfdb526d279164cfd925496f187 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 2 Jul 2018 06:22:44 +0000 Subject: ASoC: soc-pcm.c: convert to SPDX identifiers Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- sound/soc/soc-pcm.c | 28 +++++++++++----------------- 1 file changed, 11 insertions(+), 17 deletions(-) diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c index 6ee4131941df..c2a31b51da4f 100644 --- a/sound/soc/soc-pcm.c +++ b/sound/soc/soc-pcm.c @@ -1,20 +1,14 @@ -/* - * soc-pcm.c -- ALSA SoC PCM - * - * Copyright 2005 Wolfson Microelectronics PLC. - * Copyright 2005 Openedhand Ltd. - * Copyright (C) 2010 Slimlogic Ltd. - * Copyright (C) 2010 Texas Instruments Inc. - * - * Authors: Liam Girdwood - * Mark Brown - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// soc-pcm.c -- ALSA SoC PCM +// +// Copyright 2005 Wolfson Microelectronics PLC. +// Copyright 2005 Openedhand Ltd. +// Copyright (C) 2010 Slimlogic Ltd. +// Copyright (C) 2010 Texas Instruments Inc. +// +// Authors: Liam Girdwood +// Mark Brown #include #include -- cgit v1.2.3 From b53c34b4b73eb65e6480ada6ec8ddbcc2d4e9817 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 2 Jul 2018 06:22:58 +0000 Subject: ASoC: soc-dpcm.h: convert to SPDX identifiers Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- include/sound/soc-dpcm.h | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/include/sound/soc-dpcm.h b/include/sound/soc-dpcm.h index 806059052bfc..9bb92f187af8 100644 --- a/include/sound/soc-dpcm.h +++ b/include/sound/soc-dpcm.h @@ -1,11 +1,8 @@ -/* +/* SPDX-License-Identifier: GPL-2.0 + * * linux/sound/soc-dpcm.h -- ALSA SoC Dynamic PCM Support * * Author: Liam Girdwood - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __LINUX_SND_SOC_DPCM_H -- cgit v1.2.3 From 8ab0215c11817fc0a89f1f82cdf10fd4c0eb9e86 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 2 Jul 2018 06:23:16 +0000 Subject: ASoC: soc-jack.c: convert to SPDX identifiers Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- sound/soc/soc-jack.c | 19 +++++++------------ 1 file changed, 7 insertions(+), 12 deletions(-) diff --git a/sound/soc/soc-jack.c b/sound/soc/soc-jack.c index b2b16044ae80..c7b990abdbaa 100644 --- a/sound/soc/soc-jack.c +++ b/sound/soc/soc-jack.c @@ -1,15 +1,10 @@ -/* - * soc-jack.c -- ALSA SoC jack handling - * - * Copyright 2008 Wolfson Microelectronics PLC. - * - * Author: Mark Brown - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// soc-jack.c -- ALSA SoC jack handling +// +// Copyright 2008 Wolfson Microelectronics PLC. +// +// Author: Mark Brown #include #include -- cgit v1.2.3 From 632628df453ccda727fbcc1e346600162ac995e9 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 2 Jul 2018 06:23:30 +0000 Subject: ASoC: soc-utils.c: convert to SPDX identifiers Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- sound/soc/soc-utils.c | 22 ++++++++-------------- 1 file changed, 8 insertions(+), 14 deletions(-) diff --git a/sound/soc/soc-utils.c b/sound/soc/soc-utils.c index 2d9e98bd1530..ea024236c643 100644 --- a/sound/soc/soc-utils.c +++ b/sound/soc/soc-utils.c @@ -1,17 +1,11 @@ -/* - * soc-util.c -- ALSA SoC Audio Layer utility functions - * - * Copyright 2009 Wolfson Microelectronics PLC. - * - * Author: Mark Brown - * Liam Girdwood - * - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// soc-util.c -- ALSA SoC Audio Layer utility functions +// +// Copyright 2009 Wolfson Microelectronics PLC. +// +// Author: Mark Brown +// Liam Girdwood #include #include -- cgit v1.2.3 From 9e14035c7fac144f31a822f0034fe5ed79c9ef8a Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 2 Jul 2018 06:23:45 +0000 Subject: ASoC: soc-devres.c: convert to SPDX identifiers Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- sound/soc/soc-devres.c | 15 +++++---------- 1 file changed, 5 insertions(+), 10 deletions(-) diff --git a/sound/soc/soc-devres.c b/sound/soc/soc-devres.c index 7ac745df1412..a9ea172a66a7 100644 --- a/sound/soc/soc-devres.c +++ b/sound/soc/soc-devres.c @@ -1,13 +1,8 @@ -/* - * soc-devres.c -- ALSA SoC Audio Layer devres functions - * - * Copyright (C) 2013 Linaro Ltd - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// soc-devres.c -- ALSA SoC Audio Layer devres functions +// +// Copyright (C) 2013 Linaro Ltd #include #include -- cgit v1.2.3 From 7730bb13c7472620b585783f248b2dccd09d1819 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 2 Jul 2018 06:24:04 +0000 Subject: ASoC: soc-acpi: convert to SPDX identifiers Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- include/sound/soc-acpi-intel-match.h | 14 ++------------ include/sound/soc-acpi.h | 13 ++----------- sound/soc/soc-acpi.c | 20 +++++--------------- 3 files changed, 9 insertions(+), 38 deletions(-) diff --git a/include/sound/soc-acpi-intel-match.h b/include/sound/soc-acpi-intel-match.h index 917ddd0f2762..bb1d24b703fb 100644 --- a/include/sound/soc-acpi-intel-match.h +++ b/include/sound/soc-acpi-intel-match.h @@ -1,16 +1,6 @@ - -/* - * Copyright (C) 2017, Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. +/* SPDX-License-Identifier: GPL-2.0 * + * Copyright (C) 2017, Intel Corporation. All rights reserved. */ #ifndef __LINUX_SND_SOC_ACPI_INTEL_MATCH_H diff --git a/include/sound/soc-acpi.h b/include/sound/soc-acpi.h index 082224275f52..e45b2330d16a 100644 --- a/include/sound/soc-acpi.h +++ b/include/sound/soc-acpi.h @@ -1,15 +1,6 @@ -/* - * Copyright (C) 2013-15, Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. +/* SPDX-License-Identifier: GPL-2.0 * + * Copyright (C) 2013-15, Intel Corporation. All rights reserved. */ #ifndef __LINUX_SND_SOC_ACPI_H diff --git a/sound/soc/soc-acpi.c b/sound/soc/soc-acpi.c index 3d7e1ff79139..b8e72b52db30 100644 --- a/sound/soc/soc-acpi.c +++ b/sound/soc/soc-acpi.c @@ -1,18 +1,8 @@ -/* - * soc-apci.c - support for ACPI enumeration. - * - * Copyright (c) 2013-15, Intel Corporation. - * - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// soc-apci.c - support for ACPI enumeration. +// +// Copyright (c) 2013-15, Intel Corporation. #include -- cgit v1.2.3 From 873486ed4af3e11bfc20832dff7b124ba652bf77 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 2 Jul 2018 06:24:18 +0000 Subject: ASoC: soc-core: convert to SPDX identifiers Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- include/sound/soc.h | 11 ++++------- sound/soc/soc-core.c | 41 ++++++++++++++++++----------------------- 2 files changed, 22 insertions(+), 30 deletions(-) diff --git a/include/sound/soc.h b/include/sound/soc.h index f7579f82cc00..16f0bf10cc42 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -1,13 +1,10 @@ -/* +/* SPDX-License-Identifier: GPL-2.0 + * * linux/sound/soc.h -- ALSA SoC Layer * - * Author: Liam Girdwood - * Created: Aug 11th 2005 + * Author: Liam Girdwood + * Created: Aug 11th 2005 * Copyright: Wolfson Microelectronics. PLC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __LINUX_SND_SOC_H diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 4663de3cf495..68b08781c832 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -1,26 +1,21 @@ -/* - * soc-core.c -- ALSA SoC Audio Layer - * - * Copyright 2005 Wolfson Microelectronics PLC. - * Copyright 2005 Openedhand Ltd. - * Copyright (C) 2010 Slimlogic Ltd. - * Copyright (C) 2010 Texas Instruments Inc. - * - * Author: Liam Girdwood - * with code, comments and ideas from :- - * Richard Purdie - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * TODO: - * o Add hw rules to enforce rates, etc. - * o More testing with other codecs/machines. - * o Add more codecs and platforms to ensure good API coverage. - * o Support TDM on PCM and I2S - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// soc-core.c -- ALSA SoC Audio Layer +// +// Copyright 2005 Wolfson Microelectronics PLC. +// Copyright 2005 Openedhand Ltd. +// Copyright (C) 2010 Slimlogic Ltd. +// Copyright (C) 2010 Texas Instruments Inc. +// +// Author: Liam Girdwood +// with code, comments and ideas from :- +// Richard Purdie +// +// TODO: +// o Add hw rules to enforce rates, etc. +// o More testing with other codecs/machines. +// o Add more codecs and platforms to ensure good API coverage. +// o Support TDM on PCM and I2S #include #include -- cgit v1.2.3 From c01f3af4d32071915119ffcb933e75d7c165378e Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 2 Jul 2018 06:24:31 +0000 Subject: ASoC: soc-dapm: convert to SPDX identifiers Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- include/sound/soc-dapm.h | 11 ++++------- sound/soc/soc-dapm.c | 42 ++++++++++++++++++------------------------ 2 files changed, 22 insertions(+), 31 deletions(-) diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h index a6ce2de4e20a..af9ef16cc34d 100644 --- a/include/sound/soc-dapm.h +++ b/include/sound/soc-dapm.h @@ -1,13 +1,10 @@ -/* +/* SPDX-License-Identifier: GPL-2.0 + * * linux/sound/soc-dapm.h -- ALSA SoC Dynamic Audio Power Management * - * Author: Liam Girdwood - * Created: Aug 11th 2005 + * Author: Liam Girdwood + * Created: Aug 11th 2005 * Copyright: Wolfson Microelectronics. PLC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __LINUX_SND_SOC_DAPM_H diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index a099c3e45504..0602b2888d52 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -1,27 +1,21 @@ -/* - * soc-dapm.c -- ALSA SoC Dynamic Audio Power Management - * - * Copyright 2005 Wolfson Microelectronics PLC. - * Author: Liam Girdwood - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * Features: - * o Changes power status of internal codec blocks depending on the - * dynamic configuration of codec internal audio paths and active - * DACs/ADCs. - * o Platform power domain - can support external components i.e. amps and - * mic/headphone insertion events. - * o Automatic Mic Bias support - * o Jack insertion power event initiation - e.g. hp insertion will enable - * sinks, dacs, etc - * o Delayed power down of audio subsystem to reduce pops between a quick - * device reopen. - * - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// soc-dapm.c -- ALSA SoC Dynamic Audio Power Management +// +// Copyright 2005 Wolfson Microelectronics PLC. +// Author: Liam Girdwood +// +// Features: +// o Changes power status of internal codec blocks depending on the +// dynamic configuration of codec internal audio paths and active +// DACs/ADCs. +// o Platform power domain - can support external components i.e. amps and +// mic/headphone insertion events. +// o Automatic Mic Bias support +// o Jack insertion power event initiation - e.g. hp insertion will enable +// sinks, dacs, etc +// o Delayed power down of audio subsystem to reduce pops between a quick +// device reopen. #include #include -- cgit v1.2.3 From f2b6a1b25fecc48a46c8a41636101af8a41c88a8 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 2 Jul 2018 06:24:45 +0000 Subject: ASoC: soc-topology: convert to SPDX identifiers Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- include/sound/soc-topology.h | 7 ++----- sound/soc/soc-topology.c | 47 ++++++++++++++++++++------------------------ 2 files changed, 23 insertions(+), 31 deletions(-) diff --git a/include/sound/soc-topology.h b/include/sound/soc-topology.h index 401ef2c45d6c..fa4b8413d2e2 100644 --- a/include/sound/soc-topology.h +++ b/include/sound/soc-topology.h @@ -1,13 +1,10 @@ -/* +/* SPDX-License-Identifier: GPL-2.0 + * * linux/sound/soc-topology.h -- ALSA SoC Firmware Controls and DAPM * * Copyright (C) 2012 Texas Instruments Inc. * Copyright (C) 2015 Intel Corporation. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * * Simple file API to load FW that includes mixers, coefficients, DAPM graphs, * algorithms, equalisers, DAIs, widgets, FE caps, BE caps, codec link caps etc. */ diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c index 05d177d689e2..66e77e020745 100644 --- a/sound/soc/soc-topology.c +++ b/sound/soc/soc-topology.c @@ -1,29 +1,24 @@ -/* - * soc-topology.c -- ALSA SoC Topology - * - * Copyright (C) 2012 Texas Instruments Inc. - * Copyright (C) 2015 Intel Corporation. - * - * Authors: Liam Girdwood - * K, Mythri P - * Prusty, Subhransu S - * B, Jayachandran - * Abdullah, Omair M - * Jin, Yao - * Lin, Mengdong - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * Add support to read audio firmware topology alongside firmware text. The - * topology data can contain kcontrols, DAPM graphs, widgets, DAIs, DAI links, - * equalizers, firmware, coefficients etc. - * - * This file only manages the core ALSA and ASoC components, all other bespoke - * firmware topology data is passed to component drivers for bespoke handling. - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// soc-topology.c -- ALSA SoC Topology +// +// Copyright (C) 2012 Texas Instruments Inc. +// Copyright (C) 2015 Intel Corporation. +// +// Authors: Liam Girdwood +// K, Mythri P +// Prusty, Subhransu S +// B, Jayachandran +// Abdullah, Omair M +// Jin, Yao +// Lin, Mengdong +// +// Add support to read audio firmware topology alongside firmware text. The +// topology data can contain kcontrols, DAPM graphs, widgets, DAIs, DAI links, +// equalizers, firmware, coefficients etc. +// +// This file only manages the core ALSA and ASoC components, all other bespoke +// firmware topology data is passed to component drivers for bespoke handling. #include #include -- cgit v1.2.3 From b3ed4c86a700b494fc5058a52531eeb14d6fe00f Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 2 Jul 2018 06:24:57 +0000 Subject: ASoC: soc-compress: convert to SPDX identifiers Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- include/sound/compress_driver.h | 21 +++------------------ sound/soc/soc-compress.c | 24 +++++++++--------------- 2 files changed, 12 insertions(+), 33 deletions(-) diff --git a/include/sound/compress_driver.h b/include/sound/compress_driver.h index 9924bc9cbc7c..ea8c93bbb0e0 100644 --- a/include/sound/compress_driver.h +++ b/include/sound/compress_driver.h @@ -1,27 +1,12 @@ -/* +/* SPDX-License-Identifier: GPL-2.0 + * * compress_driver.h - compress offload driver definations * * Copyright (C) 2011 Intel Corporation * Authors: Vinod Koul * Pierre-Louis Bossart - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * */ + #ifndef __COMPRESS_DRIVER_H #define __COMPRESS_DRIVER_H diff --git a/sound/soc/soc-compress.c b/sound/soc/soc-compress.c index e095115fa9f9..b9e1673fea51 100644 --- a/sound/soc/soc-compress.c +++ b/sound/soc/soc-compress.c @@ -1,18 +1,12 @@ -/* - * soc-compress.c -- ALSA SoC Compress - * - * Copyright (C) 2012 Intel Corp. - * - * Authors: Namarta Kohli - * Ramesh Babu K V - * Vinod Koul - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// soc-compress.c -- ALSA SoC Compress +// +// Copyright (C) 2012 Intel Corp. +// +// Authors: Namarta Kohli +// Ramesh Babu K V +// Vinod Koul #include #include -- cgit v1.2.3 From 1356a6071cf4d7187652cd2b18dfab4763e0dba6 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 2 Jul 2018 06:25:11 +0000 Subject: ASoC: soc-generic-dmaengine-pcm: convert to SPDX identifiers Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- include/sound/dmaengine_pcm.h | 14 +++----------- sound/soc/soc-generic-dmaengine-pcm.c | 19 +++++-------------- 2 files changed, 8 insertions(+), 25 deletions(-) diff --git a/include/sound/dmaengine_pcm.h b/include/sound/dmaengine_pcm.h index e3481eebdd98..2c4cfaa135a6 100644 --- a/include/sound/dmaengine_pcm.h +++ b/include/sound/dmaengine_pcm.h @@ -1,17 +1,9 @@ -/* +/* SPDX-License-Identifier: GPL-2.0+ + * * Copyright (C) 2012, Analog Devices Inc. * Author: Lars-Peter Clausen - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * */ + #ifndef __SOUND_DMAENGINE_PCM_H__ #define __SOUND_DMAENGINE_PCM_H__ diff --git a/sound/soc/soc-generic-dmaengine-pcm.c b/sound/soc/soc-generic-dmaengine-pcm.c index 56a541b9ff9e..13bdca6e41c5 100644 --- a/sound/soc/soc-generic-dmaengine-pcm.c +++ b/sound/soc/soc-generic-dmaengine-pcm.c @@ -1,17 +1,8 @@ -/* - * Copyright (C) 2013, Analog Devices Inc. - * Author: Lars-Peter Clausen - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright (C) 2013, Analog Devices Inc. +// Author: Lars-Peter Clausen + #include #include #include -- cgit v1.2.3 From 1a8f0a3c13c136951de7ea24ccb148e745db98a2 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 2 Jul 2018 06:26:27 +0000 Subject: ASoC: ac97: convert to SPDX identifiers Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- include/sound/ac97/codec.h | 8 +++----- include/sound/ac97/compat.h | 9 +++------ include/sound/ac97/controller.h | 8 +++----- include/sound/ac97/regs.h | 20 ++------------------ include/sound/ac97_codec.h | 25 +++++-------------------- sound/soc/soc-ac97.c | 29 ++++++++++++----------------- 6 files changed, 28 insertions(+), 71 deletions(-) diff --git a/include/sound/ac97/codec.h b/include/sound/ac97/codec.h index ec04be9ab119..9792d25fa369 100644 --- a/include/sound/ac97/codec.h +++ b/include/sound/ac97/codec.h @@ -1,10 +1,8 @@ -/* - * Copyright (C) 2016 Robert Jarzmik +/* SPDX-License-Identifier: GPL-2.0 * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2016 Robert Jarzmik */ + #ifndef __SOUND_AC97_CODEC2_H #define __SOUND_AC97_CODEC2_H diff --git a/include/sound/ac97/compat.h b/include/sound/ac97/compat.h index 1351cba40048..57e19afa31ab 100644 --- a/include/sound/ac97/compat.h +++ b/include/sound/ac97/compat.h @@ -1,14 +1,11 @@ -/* - * Copyright (C) 2016 Robert Jarzmik +/* SPDX-License-Identifier: GPL-2.0 * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2016 Robert Jarzmik * * This file is for backward compatibility with snd_ac97 structure and its * multiple usages, such as the snd_ac97_bus and snd_ac97_build_ops. - * */ + #ifndef AC97_COMPAT_H #define AC97_COMPAT_H diff --git a/include/sound/ac97/controller.h b/include/sound/ac97/controller.h index b36ecdd64f14..06b5afb7fa6b 100644 --- a/include/sound/ac97/controller.h +++ b/include/sound/ac97/controller.h @@ -1,10 +1,8 @@ -/* - * Copyright (C) 2016 Robert Jarzmik +/* SPDX-License-Identifier: GPL-2.0 * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2016 Robert Jarzmik */ + #ifndef AC97_CONTROLLER_H #define AC97_CONTROLLER_H diff --git a/include/sound/ac97/regs.h b/include/sound/ac97/regs.h index 9a4fa0c3264a..843f73f3705a 100644 --- a/include/sound/ac97/regs.h +++ b/include/sound/ac97/regs.h @@ -1,27 +1,11 @@ -/* +/* SPDX-License-Identifier: GPL-2.0+ + * * Copyright (c) by Jaroslav Kysela * Universal interface for Audio Codec '97 * * For more details look to AC '97 component specification revision 2.1 * by Intel Corporation (http://developer.intel.com). - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * */ - /* * AC'97 codec registers */ diff --git a/include/sound/ac97_codec.h b/include/sound/ac97_codec.h index 89d311a503d3..cc383991c0fe 100644 --- a/include/sound/ac97_codec.h +++ b/include/sound/ac97_codec.h @@ -1,30 +1,15 @@ -#ifndef __SOUND_AC97_CODEC_H -#define __SOUND_AC97_CODEC_H - -/* +/* SPDX-License-Identifier: GPL-2.0+ + * * Copyright (c) by Jaroslav Kysela * Universal interface for Audio Codec '97 * * For more details look to AC '97 component specification revision 2.1 * by Intel Corporation (http://developer.intel.com). - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * */ +#ifndef __SOUND_AC97_CODEC_H +#define __SOUND_AC97_CODEC_H + #include #include #include diff --git a/sound/soc/soc-ac97.c b/sound/soc/soc-ac97.c index 3f424f214bca..c086786e4471 100644 --- a/sound/soc/soc-ac97.c +++ b/sound/soc/soc-ac97.c @@ -1,20 +1,15 @@ -/* - * soc-ac97.c -- ALSA SoC Audio Layer AC97 support - * - * Copyright 2005 Wolfson Microelectronics PLC. - * Copyright 2005 Openedhand Ltd. - * Copyright (C) 2010 Slimlogic Ltd. - * Copyright (C) 2010 Texas Instruments Inc. - * - * Author: Liam Girdwood - * with code, comments and ideas from :- - * Richard Purdie - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// soc-ac97.c -- ALSA SoC Audio Layer AC97 support +// +// Copyright 2005 Wolfson Microelectronics PLC. +// Copyright 2005 Openedhand Ltd. +// Copyright (C) 2010 Slimlogic Ltd. +// Copyright (C) 2010 Texas Instruments Inc. +// +// Author: Liam Girdwood +// with code, comments and ideas from :- +// Richard Purdie #include #include -- cgit v1.2.3 From 1581250119daa9426c359d059e2dc14ec04bcc0c Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Sat, 30 Jun 2018 22:24:33 +0200 Subject: ASoC: pxa: select SND_PXA2XX_LIB for drivers that depend on it Commit d767d3ce5c48b ("ASoC: pxa: provide PCM ops for ssp, i2s and ac97 components") created a build-time dependency to SND_PXA2XX_LIB but missed to reflect that in Kconfig. Reported-by: kbuild test robot Signed-off-by: Daniel Mack Signed-off-by: Mark Brown --- sound/soc/pxa/Kconfig | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig index 95dcf97a6271..2fc02c227f69 100644 --- a/sound/soc/pxa/Kconfig +++ b/sound/soc/pxa/Kconfig @@ -24,15 +24,18 @@ config SND_PXA2XX_AC97 config SND_PXA2XX_SOC_AC97 tristate select AC97_BUS + select SND_PXA2XX_LIB select SND_PXA2XX_LIB_AC97 select SND_SOC_AC97_BUS config SND_PXA2XX_SOC_I2S + select SND_PXA2XX_LIB tristate config SND_PXA_SOC_SSP tristate "Soc Audio via PXA2xx/PXA3xx SSP ports" select PXA_SSP + select SND_PXA2XX_LIB config SND_MMP_SOC_SSPA tristate -- cgit v1.2.3 From 05739375f1c0a1048fea8b9c4cb54d9e4a891938 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Fri, 29 Jun 2018 14:59:40 +0200 Subject: ASoC: pxa-ssp: remove .set_pll() and .set_clkdiv() callbacks The .set_pll() and .set_clkdiv() callbacks are considered legacy and should not be used anymore. In order to support PXA boards on DT platforms, remove them and let the code figure out the correct dividers and PLL base frequencies itself. Signed-off-by: Daniel Mack Signed-off-by: Mark Brown --- include/linux/pxa2xx_ssp.h | 8 +++ sound/soc/pxa/pxa-ssp.c | 146 ++++++++++++++++++++++----------------------- 2 files changed, 81 insertions(+), 73 deletions(-) diff --git a/include/linux/pxa2xx_ssp.h b/include/linux/pxa2xx_ssp.h index 03a7ca46735b..13b4244d44c1 100644 --- a/include/linux/pxa2xx_ssp.h +++ b/include/linux/pxa2xx_ssp.h @@ -171,6 +171,14 @@ #define SSACD_SCDB (1 << 3) /* SSPSYSCLK Divider Bypass */ #define SSACD_ACPS(x) ((x) << 4) /* Audio clock PLL select */ #define SSACD_ACDS(x) ((x) << 0) /* Audio clock divider select */ +#define SSACD_ACDS_1 (0) +#define SSACD_ACDS_2 (1) +#define SSACD_ACDS_4 (2) +#define SSACD_ACDS_8 (3) +#define SSACD_ACDS_16 (4) +#define SSACD_ACDS_32 (5) +#define SSACD_SCDB_4X (0) +#define SSACD_SCDB_1X (1) #define SSACD_SCDX8 (1 << 7) /* SYSCLK division ratio select */ /* LPSS SSP */ diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c index 01d54697ede4..f8339bb01251 100644 --- a/sound/soc/pxa/pxa-ssp.c +++ b/sound/soc/pxa/pxa-ssp.c @@ -41,6 +41,7 @@ */ struct ssp_priv { struct ssp_device *ssp; + unsigned long ssp_clk; unsigned int sysclk; unsigned int dai_fmt; unsigned int configured_dai_fmt; @@ -192,21 +193,6 @@ static void pxa_ssp_set_scr(struct ssp_device *ssp, u32 div) pxa_ssp_write_reg(ssp, SSCR0, sscr0); } -/** - * pxa_ssp_get_clkdiv - get SSP clock divider - */ -static u32 pxa_ssp_get_scr(struct ssp_device *ssp) -{ - u32 sscr0 = pxa_ssp_read_reg(ssp, SSCR0); - u32 div; - - if (ssp->type == PXA25x_SSP) - div = ((sscr0 >> 8) & 0xff) * 2 + 2; - else - div = ((sscr0 >> 8) & 0xfff) + 1; - return div; -} - /* * Set the SSP ports SYSCLK. */ @@ -262,67 +248,18 @@ static int pxa_ssp_set_dai_sysclk(struct snd_soc_dai *cpu_dai, return 0; } -/* - * Set the SSP clock dividers. - */ -static int pxa_ssp_set_dai_clkdiv(struct snd_soc_dai *cpu_dai, - int div_id, int div) -{ - struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai); - struct ssp_device *ssp = priv->ssp; - int val; - - switch (div_id) { - case PXA_SSP_AUDIO_DIV_ACDS: - val = (pxa_ssp_read_reg(ssp, SSACD) & ~0x7) | SSACD_ACDS(div); - pxa_ssp_write_reg(ssp, SSACD, val); - break; - case PXA_SSP_AUDIO_DIV_SCDB: - val = pxa_ssp_read_reg(ssp, SSACD); - val &= ~SSACD_SCDB; - if (ssp->type == PXA3xx_SSP) - val &= ~SSACD_SCDX8; - switch (div) { - case PXA_SSP_CLK_SCDB_1: - val |= SSACD_SCDB; - break; - case PXA_SSP_CLK_SCDB_4: - break; - case PXA_SSP_CLK_SCDB_8: - if (ssp->type == PXA3xx_SSP) - val |= SSACD_SCDX8; - else - return -EINVAL; - break; - default: - return -EINVAL; - } - pxa_ssp_write_reg(ssp, SSACD, val); - break; - case PXA_SSP_DIV_SCR: - pxa_ssp_set_scr(ssp, div); - break; - default: - return -ENODEV; - } - - return 0; -} - /* * Configure the PLL frequency pxa27x and (afaik - pxa320 only) */ -static int pxa_ssp_set_dai_pll(struct snd_soc_dai *cpu_dai, int pll_id, - int source, unsigned int freq_in, unsigned int freq_out) +static int pxa_ssp_set_pll(struct ssp_priv *priv, unsigned int freq) { - struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai); struct ssp_device *ssp = priv->ssp; u32 ssacd = pxa_ssp_read_reg(ssp, SSACD) & ~0x70; if (ssp->type == PXA3xx_SSP) pxa_ssp_write_reg(ssp, SSACDD, 0); - switch (freq_out) { + switch (freq) { case 5622000: break; case 11345000: @@ -353,7 +290,7 @@ static int pxa_ssp_set_dai_pll(struct snd_soc_dai *cpu_dai, int pll_id, u64 tmp = 19968; tmp *= 1000000; - do_div(tmp, freq_out); + do_div(tmp, freq); val = tmp; val = (val << 16) | 64; @@ -363,7 +300,7 @@ static int pxa_ssp_set_dai_pll(struct snd_soc_dai *cpu_dai, int pll_id, dev_dbg(&ssp->pdev->dev, "Using SSACDD %x to supply %uHz\n", - val, freq_out); + val, freq); break; } @@ -568,6 +505,24 @@ static int pxa_ssp_configure_dai_fmt(struct ssp_priv *priv) return 0; } +struct pxa_ssp_clock_mode { + int rate; + int pll; + u8 acds; + u8 scdb; +}; + +static const struct pxa_ssp_clock_mode pxa_ssp_clock_modes[] = { + { .rate = 8000, .pll = 32842000, .acds = SSACD_ACDS_32, .scdb = SSACD_SCDB_4X }, + { .rate = 11025, .pll = 5622000, .acds = SSACD_ACDS_4, .scdb = SSACD_SCDB_4X }, + { .rate = 16000, .pll = 32842000, .acds = SSACD_ACDS_16, .scdb = SSACD_SCDB_4X }, + { .rate = 22050, .pll = 5622000, .acds = SSACD_ACDS_2, .scdb = SSACD_SCDB_4X }, + { .rate = 44100, .pll = 11345000, .acds = SSACD_ACDS_2, .scdb = SSACD_SCDB_4X }, + { .rate = 48000, .pll = 12235000, .acds = SSACD_ACDS_2, .scdb = SSACD_SCDB_4X }, + { .rate = 96000, .pll = 12235000, .acds = SSACD_ACDS_4, .scdb = SSACD_SCDB_1X }, + {} +}; + /* * Set the SSP audio DMA parameters and sample size. * Can be called multiple times by oss emulation. @@ -579,11 +534,12 @@ static int pxa_ssp_hw_params(struct snd_pcm_substream *substream, struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai); struct ssp_device *ssp = priv->ssp; int chn = params_channels(params); - u32 sscr0; - u32 sspsp; + u32 sscr0, sspsp; int width = snd_pcm_format_physical_width(params_format(params)); int ttsa = pxa_ssp_read_reg(ssp, SSTSA) & 0xf; struct snd_dmaengine_dai_dma_data *dma_data; + int rate = params_rate(params); + int bclk = rate * chn * (width / 8); int ret; dma_data = snd_soc_dai_get_dma_data(cpu_dai, substream); @@ -623,11 +579,57 @@ static int pxa_ssp_hw_params(struct snd_pcm_substream *substream, } pxa_ssp_write_reg(ssp, SSCR0, sscr0); + if (sscr0 & SSCR0_ACS) { + ret = pxa_ssp_set_pll(priv, bclk); + + /* + * If we were able to generate the bclk directly, + * all is fine. Otherwise, look up the closest rate + * from the table and also set the dividers. + */ + + if (ret < 0) { + const struct pxa_ssp_clock_mode *m; + int ssacd, acds; + + for (m = pxa_ssp_clock_modes; m->rate; m++) { + if (m->rate == rate) + break; + } + + if (!m->rate) + return -EINVAL; + + acds = m->acds; + + /* The values in the table are for 16 bits */ + if (width == 32) + acds--; + + ret = pxa_ssp_set_pll(priv, bclk); + if (ret < 0) + return ret; + + ssacd = pxa_ssp_read_reg(ssp, SSACD); + ssacd &= ~(SSACD_ACDS(7) | SSACD_SCDB_1X); + ssacd |= SSACD_ACDS(m->acds); + ssacd |= m->scdb; + pxa_ssp_write_reg(ssp, SSACD, ssacd); + } + } else if (sscr0 & SSCR0_ECS) { + /* + * For setups with external clocking, the PLL and its diviers + * are not active. Instead, the SCR bits in SSCR0 can be used + * to divide the clock. + */ + pxa_ssp_set_scr(ssp, bclk / rate); + } + switch (priv->dai_fmt & SND_SOC_DAIFMT_FORMAT_MASK) { case SND_SOC_DAIFMT_I2S: sspsp = pxa_ssp_read_reg(ssp, SSPSP); - if ((pxa_ssp_get_scr(ssp) == 4) && (width == 16)) { + if (((priv->sysclk / bclk) == 64) && (width == 16)) { /* This is a special case where the bitclk is 64fs * and we're not dealing with 2*32 bits of audio * samples. @@ -812,8 +814,6 @@ static const struct snd_soc_dai_ops pxa_ssp_dai_ops = { .trigger = pxa_ssp_trigger, .hw_params = pxa_ssp_hw_params, .set_sysclk = pxa_ssp_set_dai_sysclk, - .set_clkdiv = pxa_ssp_set_dai_clkdiv, - .set_pll = pxa_ssp_set_dai_pll, .set_fmt = pxa_ssp_set_dai_fmt, .set_tdm_slot = pxa_ssp_set_dai_tdm_slot, .set_tristate = pxa_ssp_set_dai_tristate, -- cgit v1.2.3 From 5650729f9a1bbf65b57139d855dabe0a7e6cb494 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Fri, 29 Jun 2018 17:09:20 +0200 Subject: ASoC: es7134: remove 64kHz rate from the supported rates 64Khz is actually not supported by the es7134 according to the datasheet Fixes: 9000b59d7a12 ("ASoC: es7134: add es7134 DAC driver") Signed-off-by: Jerome Brunet Signed-off-by: Mark Brown --- sound/soc/codecs/es7134.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/es7134.c b/sound/soc/codecs/es7134.c index 58515bb1a303..2fbb49f5b278 100644 --- a/sound/soc/codecs/es7134.c +++ b/sound/soc/codecs/es7134.c @@ -48,7 +48,11 @@ static struct snd_soc_dai_driver es7134_dai = { .stream_name = "Playback", .channels_min = 2, .channels_max = 2, - .rates = SNDRV_PCM_RATE_8000_192000, + .rates = (SNDRV_PCM_RATE_8000_48000 | + SNDRV_PCM_RATE_88200 | + SNDRV_PCM_RATE_96000 | + SNDRV_PCM_RATE_176400 | + SNDRV_PCM_RATE_192000), .formats = (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S18_3LE | SNDRV_PCM_FMTBIT_S20_3LE | -- cgit v1.2.3 From a016b11cc41df06b79c0c226e719d0d88373919c Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Fri, 29 Jun 2018 17:09:21 +0200 Subject: ASoC: es7134: check if mclk rate is valid For each supported sample rate, the es7134 can work with several mclk / sample rate ratio. Check if ratio we get is actually OK. Signed-off-by: Jerome Brunet Signed-off-by: Mark Brown --- sound/soc/codecs/es7134.c | 119 +++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 117 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/es7134.c b/sound/soc/codecs/es7134.c index 2fbb49f5b278..698289dc3e22 100644 --- a/sound/soc/codecs/es7134.c +++ b/sound/soc/codecs/es7134.c @@ -17,6 +17,7 @@ * in the file called COPYING. */ +#include #include #include @@ -24,6 +25,77 @@ * The everest 7134 is a very simple DA converter with no register */ +struct es7134_clock_mode { + unsigned int rate_min; + unsigned int rate_max; + unsigned int *mclk_fs; + unsigned int mclk_fs_num; +}; + +struct es7134_chip { + const struct es7134_clock_mode *modes; + unsigned int mode_num; +}; + +struct es7134_data { + unsigned int mclk; + const struct es7134_chip *chip; +}; + +static int es7134_check_mclk(struct snd_soc_dai *dai, + struct es7134_data *priv, + unsigned int rate) +{ + unsigned int mfs = priv->mclk / rate; + int i, j; + + for (i = 0; i < priv->chip->mode_num; i++) { + const struct es7134_clock_mode *mode = &priv->chip->modes[i]; + + if (rate < mode->rate_min || rate > mode->rate_max) + continue; + + for (j = 0; j < mode->mclk_fs_num; j++) { + if (mode->mclk_fs[j] == mfs) + return 0; + } + + dev_err(dai->dev, "unsupported mclk_fs %u for rate %u\n", + mfs, rate); + return -EINVAL; + } + + /* should not happen */ + dev_err(dai->dev, "unsupported rate: %u\n", rate); + return -EINVAL; +} + +static int es7134_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct es7134_data *priv = snd_soc_dai_get_drvdata(dai); + + /* mclk has not been provided, assume it is OK */ + if (!priv->mclk) + return 0; + + return es7134_check_mclk(dai, priv, params_rate(params)); +} + +static int es7134_set_sysclk(struct snd_soc_dai *dai, int clk_id, + unsigned int freq, int dir) +{ + struct es7134_data *priv = snd_soc_dai_get_drvdata(dai); + + if (dir == SND_SOC_CLOCK_IN && clk_id == 0) { + priv->mclk = freq; + return 0; + } + + return -ENOTSUPP; +} + static int es7134_set_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) { fmt &= (SND_SOC_DAIFMT_FORMAT_MASK | SND_SOC_DAIFMT_INV_MASK | @@ -40,6 +112,8 @@ static int es7134_set_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) static const struct snd_soc_dai_ops es7134_dai_ops = { .set_fmt = es7134_set_fmt, + .hw_params = es7134_hw_params, + .set_sysclk = es7134_set_sysclk, }; static struct snd_soc_dai_driver es7134_dai = { @@ -62,6 +136,33 @@ static struct snd_soc_dai_driver es7134_dai = { .ops = &es7134_dai_ops, }; +static const struct es7134_clock_mode es7134_modes[] = { + { + /* Single speed mode */ + .rate_min = 8000, + .rate_max = 50000, + .mclk_fs = (unsigned int[]) { 256, 384, 512, 768, 1024 }, + .mclk_fs_num = 5, + }, { + /* Double speed mode */ + .rate_min = 84000, + .rate_max = 100000, + .mclk_fs = (unsigned int[]) { 128, 192, 256, 384, 512 }, + .mclk_fs_num = 5, + }, { + /* Quad speed mode */ + .rate_min = 167000, + .rate_max = 192000, + .mclk_fs = (unsigned int[]) { 128, 192, 256 }, + .mclk_fs_num = 3, + }, +}; + +static const struct es7134_chip es7134_chip = { + .modes = es7134_modes, + .mode_num = ARRAY_SIZE(es7134_modes), +}; + static const struct snd_soc_dapm_widget es7134_dapm_widgets[] = { SND_SOC_DAPM_OUTPUT("AOUTL"), SND_SOC_DAPM_OUTPUT("AOUTR"), @@ -86,6 +187,20 @@ static const struct snd_soc_component_driver es7134_component_driver = { static int es7134_probe(struct platform_device *pdev) { + struct device *dev = &pdev->dev; + struct es7134_data *priv; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + platform_set_drvdata(pdev, priv); + + priv->chip = of_device_get_match_data(dev); + if (!priv->chip) { + dev_err(dev, "failed to match device\n"); + return -ENODEV; + } + return devm_snd_soc_register_component(&pdev->dev, &es7134_component_driver, &es7134_dai, 1); @@ -93,8 +208,8 @@ static int es7134_probe(struct platform_device *pdev) #ifdef CONFIG_OF static const struct of_device_id es7134_ids[] = { - { .compatible = "everest,es7134", }, - { .compatible = "everest,es7144", }, + { .compatible = "everest,es7134", .data = &es7134_chip }, + { .compatible = "everest,es7144", .data = &es7134_chip }, { } }; MODULE_DEVICE_TABLE(of, es7134_ids); -- cgit v1.2.3 From 424e2b4b3521334812d833eef27df77671428698 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Fri, 29 Jun 2018 17:09:23 +0200 Subject: ASoC: es7134: Add VDD and AVDD power supplies Add the VDD and AVDD power supplies to the DAPM graph as some board may need to enable a regulator to turn them on. Signed-off-by: Jerome Brunet Signed-off-by: Mark Brown --- sound/soc/codecs/es7134.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/sound/soc/codecs/es7134.c b/sound/soc/codecs/es7134.c index 698289dc3e22..5ad59c38fed1 100644 --- a/sound/soc/codecs/es7134.c +++ b/sound/soc/codecs/es7134.c @@ -167,11 +167,15 @@ static const struct snd_soc_dapm_widget es7134_dapm_widgets[] = { SND_SOC_DAPM_OUTPUT("AOUTL"), SND_SOC_DAPM_OUTPUT("AOUTR"), SND_SOC_DAPM_DAC("DAC", "Playback", SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_REGULATOR_SUPPLY("VDD", 0, 0), + SND_SOC_DAPM_REGULATOR_SUPPLY("AVDD", 0, 0), }; static const struct snd_soc_dapm_route es7134_dapm_routes[] = { { "AOUTL", NULL, "DAC" }, { "AOUTR", NULL, "DAC" }, + { "Playback", NULL, "VDD" }, + { "DAC", NULL, "AVDD" }, }; static const struct snd_soc_component_driver es7134_component_driver = { -- cgit v1.2.3 From d284f8248c72d0cb36a930920e60592eb455cd0d Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Thu, 28 Jun 2018 21:00:14 -0400 Subject: dm writecache: support optional offset for start of device Add an optional parameter "start_sector" to allow the start of the device to be offset by the specified number of 512-byte sectors. The sectors below this offset are not used by the writecache device and are left to be used for disk labels and/or userspace metadata (e.g. lvm). Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer --- Documentation/device-mapper/writecache.txt | 2 ++ drivers/md/dm-writecache.c | 43 ++++++++++++++++++++---------- 2 files changed, 31 insertions(+), 14 deletions(-) diff --git a/Documentation/device-mapper/writecache.txt b/Documentation/device-mapper/writecache.txt index 4424fa2c67d7..01532b3008ae 100644 --- a/Documentation/device-mapper/writecache.txt +++ b/Documentation/device-mapper/writecache.txt @@ -15,6 +15,8 @@ Constructor parameters: size) 5. the number of optional parameters (the parameters with an argument count as two) + start_sector n (default: 0) + offset from the start of cache device in 512-byte sectors high_watermark n (default: 50) start writeback when the number of used blocks reach this watermark diff --git a/drivers/md/dm-writecache.c b/drivers/md/dm-writecache.c index 07ea6a48aac6..87107c995cb5 100644 --- a/drivers/md/dm-writecache.c +++ b/drivers/md/dm-writecache.c @@ -136,6 +136,7 @@ struct dm_writecache { struct dm_target *ti; struct dm_dev *dev; struct dm_dev *ssd_dev; + sector_t start_sector; void *memory_map; uint64_t memory_map_size; size_t metadata_sectors; @@ -293,6 +294,10 @@ static int persistent_memory_claim(struct dm_writecache *wc) } dax_read_unlock(id); + + wc->memory_map += (size_t)wc->start_sector << SECTOR_SHIFT; + wc->memory_map_size -= (size_t)wc->start_sector << SECTOR_SHIFT; + return 0; err3: kvfree(pages); @@ -311,7 +316,7 @@ static int persistent_memory_claim(struct dm_writecache *wc) static void persistent_memory_release(struct dm_writecache *wc) { if (wc->memory_vmapped) - vunmap(wc->memory_map); + vunmap(wc->memory_map - ((size_t)wc->start_sector << SECTOR_SHIFT)); } static struct page *persistent_memory_page(void *addr) @@ -359,7 +364,7 @@ static void *memory_data(struct dm_writecache *wc, struct wc_entry *e) static sector_t cache_sector(struct dm_writecache *wc, struct wc_entry *e) { - return wc->metadata_sectors + + return wc->start_sector + wc->metadata_sectors + ((sector_t)e->index << (wc->block_size_bits - SECTOR_SHIFT)); } @@ -471,6 +476,7 @@ static void ssd_commit_flushed(struct dm_writecache *wc) if (unlikely(region.sector + region.count > wc->metadata_sectors)) region.count = wc->metadata_sectors - region.sector; + region.sector += wc->start_sector; atomic_inc(&endio.count); req.bi_op = REQ_OP_WRITE; req.bi_op_flags = REQ_SYNC; @@ -1946,14 +1952,6 @@ static int writecache_ctr(struct dm_target *ti, unsigned argc, char **argv) } wc->memory_map_size = i_size_read(wc->ssd_dev->bdev->bd_inode); - if (WC_MODE_PMEM(wc)) { - r = persistent_memory_claim(wc); - if (r) { - ti->error = "Unable to map persistent memory for cache"; - goto bad; - } - } - /* * Parse the cache block size */ @@ -1982,7 +1980,16 @@ static int writecache_ctr(struct dm_target *ti, unsigned argc, char **argv) while (opt_params) { string = dm_shift_arg(&as), opt_params--; - if (!strcasecmp(string, "high_watermark") && opt_params >= 1) { + if (!strcasecmp(string, "start_sector") && opt_params >= 1) { + unsigned long long start_sector; + string = dm_shift_arg(&as), opt_params--; + if (sscanf(string, "%llu%c", &start_sector, &dummy) != 1) + goto invalid_optional; + wc->start_sector = start_sector; + if (wc->start_sector != start_sector || + wc->start_sector >= wc->memory_map_size >> SECTOR_SHIFT) + goto invalid_optional; + } else if (!strcasecmp(string, "high_watermark") && opt_params >= 1) { string = dm_shift_arg(&as), opt_params--; if (sscanf(string, "%d%c", &high_wm_percent, &dummy) != 1) goto invalid_optional; @@ -2039,12 +2046,20 @@ invalid_optional: goto bad; } - if (!WC_MODE_PMEM(wc)) { + if (WC_MODE_PMEM(wc)) { + r = persistent_memory_claim(wc); + if (r) { + ti->error = "Unable to map persistent memory for cache"; + goto bad; + } + } else { struct dm_io_region region; struct dm_io_request req; size_t n_blocks, n_metadata_blocks; uint64_t n_bitmap_bits; + wc->memory_map_size -= (uint64_t)wc->start_sector << SECTOR_SHIFT; + bio_list_init(&wc->flush_list); wc->flush_thread = kthread_create(writecache_flush_thread, wc, "dm_writecache_flush"); if (IS_ERR(wc->flush_thread)) { @@ -2097,7 +2112,7 @@ invalid_optional: } region.bdev = wc->ssd_dev->bdev; - region.sector = 0; + region.sector = wc->start_sector; region.count = wc->metadata_sectors; req.bi_op = REQ_OP_READ; req.bi_op_flags = REQ_SYNC; @@ -2265,7 +2280,7 @@ static void writecache_status(struct dm_target *ti, status_type_t type, static struct target_type writecache_target = { .name = "writecache", - .version = {1, 0, 0}, + .version = {1, 1, 0}, .module = THIS_MODULE, .ctr = writecache_ctr, .dtr = writecache_dtr, -- cgit v1.2.3 From 20b52a75166086a40d838397ef3db28a4f2c5998 Mon Sep 17 00:00:00 2001 From: Magnus Karlsson Date: Fri, 29 Jun 2018 09:48:17 +0200 Subject: xsk: fix potential lost completion message in SKB path The code in xskq_produce_addr erroneously checked if there was up to LAZY_UPDATE_THRESHOLD amount of space in the completion queue. It only needs to check if there is one slot left in the queue. This bug could under some circumstances lead to a WARN_ON_ONCE being triggered and the completion message to user space being lost. Fixes: 35fcde7f8deb ("xsk: support for Tx") Signed-off-by: Magnus Karlsson Reported-by: Pavel Odintsov Signed-off-by: Alexei Starovoitov --- net/xdp/xsk_queue.h | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/net/xdp/xsk_queue.h b/net/xdp/xsk_queue.h index ef6a6f0ec949..52ecaf770642 100644 --- a/net/xdp/xsk_queue.h +++ b/net/xdp/xsk_queue.h @@ -62,14 +62,9 @@ static inline u32 xskq_nb_avail(struct xsk_queue *q, u32 dcnt) return (entries > dcnt) ? dcnt : entries; } -static inline u32 xskq_nb_free_lazy(struct xsk_queue *q, u32 producer) -{ - return q->nentries - (producer - q->cons_tail); -} - static inline u32 xskq_nb_free(struct xsk_queue *q, u32 producer, u32 dcnt) { - u32 free_entries = xskq_nb_free_lazy(q, producer); + u32 free_entries = q->nentries - (producer - q->cons_tail); if (free_entries >= dcnt) return free_entries; @@ -129,7 +124,7 @@ static inline int xskq_produce_addr(struct xsk_queue *q, u64 addr) { struct xdp_umem_ring *ring = (struct xdp_umem_ring *)q->ring; - if (xskq_nb_free(q, q->prod_tail, LAZY_UPDATE_THRESHOLD) == 0) + if (xskq_nb_free(q, q->prod_tail, 1) == 0) return -ENOSPC; ring->desc[q->prod_tail++ & q->ring_mask] = addr; -- cgit v1.2.3 From fe5886852601fb2593cbc5a7549ef9fd2ef481ba Mon Sep 17 00:00:00 2001 From: Magnus Karlsson Date: Fri, 29 Jun 2018 09:48:18 +0200 Subject: xsk: frame could be completed more than once in SKB path Fixed a bug in which a frame could be completed more than once when an error was returned from dev_direct_xmit(). The code erroneously retried sending the message leading to multiple calls to the SKB destructor and therefore multiple completions of the same buffer to user space. The error code in this case has been changed from EAGAIN to EBUSY in order to tell user space that the sending of the packet failed and the buffer has been return to user space through the completion queue. Fixes: 35fcde7f8deb ("xsk: support for Tx") Signed-off-by: Magnus Karlsson Reported-by: Pavel Odintsov Signed-off-by: Alexei Starovoitov --- net/xdp/xsk.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c index 59fb7d3c36a3..15aca73805fc 100644 --- a/net/xdp/xsk.c +++ b/net/xdp/xsk.c @@ -268,15 +268,15 @@ static int xsk_generic_xmit(struct sock *sk, struct msghdr *m, skb->destructor = xsk_destruct_skb; err = dev_direct_xmit(skb, xs->queue_id); + xskq_discard_desc(xs->tx); /* Ignore NET_XMIT_CN as packet might have been sent */ if (err == NET_XMIT_DROP || err == NETDEV_TX_BUSY) { - err = -EAGAIN; - /* SKB consumed by dev_direct_xmit() */ + /* SKB completed but not sent */ + err = -EBUSY; goto out; } sent_frame = true; - xskq_discard_desc(xs->tx); } out: -- cgit v1.2.3 From c03079c9d93d593d44524883b6b6127b21978e22 Mon Sep 17 00:00:00 2001 From: Magnus Karlsson Date: Fri, 29 Jun 2018 09:48:19 +0200 Subject: samples/bpf: deal with EBUSY return code from sendmsg in xdpsock sample Sendmsg in the SKB path of AF_XDP can now return EBUSY when a packet was discarded and completed by the driver. Just ignore this message in the sample application. Fixes: b4b8faa1ded7 ("samples/bpf: sample application and documentation for AF_XDP sockets") Signed-off-by: Magnus Karlsson Reported-by: Pavel Odintsov Signed-off-by: Alexei Starovoitov --- samples/bpf/xdpsock_user.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/samples/bpf/xdpsock_user.c b/samples/bpf/xdpsock_user.c index d69c8d78d3fd..5904b1543831 100644 --- a/samples/bpf/xdpsock_user.c +++ b/samples/bpf/xdpsock_user.c @@ -729,7 +729,7 @@ static void kick_tx(int fd) int ret; ret = sendto(fd, NULL, 0, MSG_DONTWAIT, NULL, 0); - if (ret >= 0 || errno == ENOBUFS || errno == EAGAIN) + if (ret >= 0 || errno == ENOBUFS || errno == EAGAIN || errno == EBUSY) return; lassert(0); } -- cgit v1.2.3 From a9744f7ca200c756e6f8c65b633770a2da711651 Mon Sep 17 00:00:00 2001 From: Magnus Karlsson Date: Fri, 29 Jun 2018 09:48:20 +0200 Subject: xsk: fix potential race in SKB TX completion code There is a potential race in the TX completion code for the SKB case. One process enters the sendmsg code of an AF_XDP socket in order to send a frame. The execution eventually trickles down to the driver that is told to send the packet. However, it decides to drop the packet due to some error condition (e.g., rings full) and frees the SKB. This will trigger the SKB destructor and a completion will be sent to the AF_XDP user space through its single-producer/single-consumer queues. At the same time a TX interrupt has fired on another core and it dispatches the TX completion code in the driver. It does its HW specific things and ends up freeing the SKB associated with the transmitted packet. This will trigger the SKB destructor and a completion will be sent to the AF_XDP user space through its single-producer/single-consumer queues. With a pseudo call stack, it would look like this: Core 1: sendmsg() being called in the application netdev_start_xmit() Driver entered through ndo_start_xmit Driver decides to free the SKB for some reason (e.g., rings full) Destructor of SKB called xskq_produce_addr() is called to signal completion to user space Core 2: TX completion irq NAPI loop Driver irq handler for TX completions Frees the SKB Destructor of SKB called xskq_produce_addr() is called to signal completion to user space We now have a violation of the single-producer/single-consumer principle for our queues as there are two threads trying to produce at the same time on the same queue. Fixed by introducing a spin_lock in the destructor. In regards to the performance, I get around 1.74 Mpps for txonly before and after the introduction of the spinlock. There is of course some impact due to the spin lock but it is in the less significant digits that are too noisy for me to measure. But let us say that the version without the spin lock got 1.745 Mpps in the best case and the version with 1.735 Mpps in the worst case, then that would mean a maximum drop in performance of 0.5%. Fixes: 35fcde7f8deb ("xsk: support for Tx") Signed-off-by: Magnus Karlsson Signed-off-by: Alexei Starovoitov --- include/net/xdp_sock.h | 4 ++++ net/xdp/xsk.c | 4 ++++ 2 files changed, 8 insertions(+) diff --git a/include/net/xdp_sock.h b/include/net/xdp_sock.h index 9fe472f2ac95..7161856bcf9c 100644 --- a/include/net/xdp_sock.h +++ b/include/net/xdp_sock.h @@ -60,6 +60,10 @@ struct xdp_sock { bool zc; /* Protects multiple processes in the control path */ struct mutex mutex; + /* Mutual exclusion of NAPI TX thread and sendmsg error paths + * in the SKB destructor callback. + */ + spinlock_t tx_completion_lock; u64 rx_dropped; }; diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c index 15aca73805fc..7d220cbd09b6 100644 --- a/net/xdp/xsk.c +++ b/net/xdp/xsk.c @@ -199,8 +199,11 @@ static void xsk_destruct_skb(struct sk_buff *skb) { u64 addr = (u64)(long)skb_shinfo(skb)->destructor_arg; struct xdp_sock *xs = xdp_sk(skb->sk); + unsigned long flags; + spin_lock_irqsave(&xs->tx_completion_lock, flags); WARN_ON_ONCE(xskq_produce_addr(xs->umem->cq, addr)); + spin_unlock_irqrestore(&xs->tx_completion_lock, flags); sock_wfree(skb); } @@ -755,6 +758,7 @@ static int xsk_create(struct net *net, struct socket *sock, int protocol, xs = xdp_sk(sk); mutex_init(&xs->mutex); + spin_lock_init(&xs->tx_completion_lock); local_bh_disable(); sock_prot_inuse_add(net, &xsk_proto, 1); -- cgit v1.2.3 From f706abf188a82c9d961ed267a18ff5cb5e9aace9 Mon Sep 17 00:00:00 2001 From: Greentime Hu Date: Thu, 28 Jun 2018 18:03:25 +0800 Subject: nds32: To implement these icache invalidation APIs since nds32 cores don't snoop data cache. This issue is found by Guo Ren. Based on the Documentation/core-api/cachetlb.rst and it says: "Any necessary cache flushing or other coherency operations that need to occur should happen here. If the processor's instruction cache does not snoop cpu stores, it is very likely that you will need to flush the instruction cache for copy_to_user_page()." "If the icache does not snoop stores then this routine(flush_icache_range) will need to flush it." Signed-off-by: Guo Ren Signed-off-by: Greentime Hu --- arch/nds32/include/asm/cacheflush.h | 9 +++++-- arch/nds32/mm/cacheflush.c | 53 ++++++++++++++++++++++--------------- 2 files changed, 39 insertions(+), 23 deletions(-) diff --git a/arch/nds32/include/asm/cacheflush.h b/arch/nds32/include/asm/cacheflush.h index 10b48f0d8e85..8b26198d51bb 100644 --- a/arch/nds32/include/asm/cacheflush.h +++ b/arch/nds32/include/asm/cacheflush.h @@ -8,6 +8,8 @@ #define PG_dcache_dirty PG_arch_1 +void flush_icache_range(unsigned long start, unsigned long end); +void flush_icache_page(struct vm_area_struct *vma, struct page *page); #ifdef CONFIG_CPU_CACHE_ALIASING void flush_cache_mm(struct mm_struct *mm); void flush_cache_dup_mm(struct mm_struct *mm); @@ -34,13 +36,16 @@ void flush_anon_page(struct vm_area_struct *vma, void flush_kernel_dcache_page(struct page *page); void flush_kernel_vmap_range(void *addr, int size); void invalidate_kernel_vmap_range(void *addr, int size); -void flush_icache_range(unsigned long start, unsigned long end); -void flush_icache_page(struct vm_area_struct *vma, struct page *page); #define flush_dcache_mmap_lock(mapping) xa_lock_irq(&(mapping)->i_pages) #define flush_dcache_mmap_unlock(mapping) xa_unlock_irq(&(mapping)->i_pages) #else #include +#undef flush_icache_range +#undef flush_icache_page +#undef flush_icache_user_range +void flush_icache_user_range(struct vm_area_struct *vma, struct page *page, + unsigned long addr, int len); #endif #endif /* __NDS32_CACHEFLUSH_H__ */ diff --git a/arch/nds32/mm/cacheflush.c b/arch/nds32/mm/cacheflush.c index ce8fd34497bf..7fcaa4e6be78 100644 --- a/arch/nds32/mm/cacheflush.c +++ b/arch/nds32/mm/cacheflush.c @@ -13,6 +13,38 @@ extern struct cache_info L1_cache_info[2]; +void flush_icache_range(unsigned long start, unsigned long end) +{ + unsigned long line_size, flags; + line_size = L1_cache_info[DCACHE].line_size; + start = start & ~(line_size - 1); + end = (end + line_size - 1) & ~(line_size - 1); + local_irq_save(flags); + cpu_cache_wbinval_range(start, end, 1); + local_irq_restore(flags); +} +EXPORT_SYMBOL(flush_icache_range); + +void flush_icache_page(struct vm_area_struct *vma, struct page *page) +{ + unsigned long flags; + unsigned long kaddr; + local_irq_save(flags); + kaddr = (unsigned long)kmap_atomic(page); + cpu_cache_wbinval_page(kaddr, vma->vm_flags & VM_EXEC); + kunmap_atomic((void *)kaddr); + local_irq_restore(flags); +} +EXPORT_SYMBOL(flush_icache_page); + +void flush_icache_user_range(struct vm_area_struct *vma, struct page *page, + unsigned long addr, int len) +{ + unsigned long kaddr; + kaddr = (unsigned long)kmap_atomic(page) + (addr & ~PAGE_MASK); + flush_icache_range(kaddr, kaddr + len); + kunmap_atomic((void *)kaddr); +} #ifndef CONFIG_CPU_CACHE_ALIASING void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t * pte) @@ -318,27 +350,6 @@ void invalidate_kernel_vmap_range(void *addr, int size) } EXPORT_SYMBOL(invalidate_kernel_vmap_range); -void flush_icache_range(unsigned long start, unsigned long end) -{ - unsigned long line_size, flags; - line_size = L1_cache_info[DCACHE].line_size; - start = start & ~(line_size - 1); - end = (end + line_size - 1) & ~(line_size - 1); - local_irq_save(flags); - cpu_cache_wbinval_range(start, end, 1); - local_irq_restore(flags); -} -EXPORT_SYMBOL(flush_icache_range); - -void flush_icache_page(struct vm_area_struct *vma, struct page *page) -{ - unsigned long flags; - local_irq_save(flags); - cpu_cache_wbinval_page((unsigned long)page_address(page), - vma->vm_flags & VM_EXEC); - local_irq_restore(flags); -} - void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t * pte) { -- cgit v1.2.3 From 6897e6ecb3167598cb45e1a1424dd4d5e3778837 Mon Sep 17 00:00:00 2001 From: Greentime Hu Date: Thu, 28 Jun 2018 18:29:21 +0800 Subject: nds32: Fix the dts pointer is not passed correctly issue. We found that the original implementation will only use the built-in dtb pointer instead of the pointer pass from bootloader. This bug is fixed by this patch. Signed-off-by: Greentime Hu --- arch/nds32/kernel/setup.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/nds32/kernel/setup.c b/arch/nds32/kernel/setup.c index 2f5b2ccebe47..63a1a5ef5219 100644 --- a/arch/nds32/kernel/setup.c +++ b/arch/nds32/kernel/setup.c @@ -278,7 +278,8 @@ static void __init setup_memory(void) void __init setup_arch(char **cmdline_p) { - early_init_devtree( __dtb_start); + early_init_devtree(__atags_pointer ? \ + phys_to_virt(__atags_pointer) : __dtb_start); setup_cpuinfo(); -- cgit v1.2.3 From bc9cb86e6514bed3d317208556d3cd48acff40e0 Mon Sep 17 00:00:00 2001 From: Greentime Hu Date: Tue, 3 Jul 2018 14:07:11 +0800 Subject: nds32: To simplify the implementation of update_mmu_cache() The checking code is done in kmap_atomic() so that we don't need to check it in update_mmu_cache() again. There is no need to implement it for cache aliasing or cache non-aliasing versions. We can just implement one version for both. Signed-off-by: Greentime Hu --- arch/nds32/mm/cacheflush.c | 47 ++++++++-------------------------------------- 1 file changed, 8 insertions(+), 39 deletions(-) diff --git a/arch/nds32/mm/cacheflush.c b/arch/nds32/mm/cacheflush.c index 7fcaa4e6be78..254703653b6f 100644 --- a/arch/nds32/mm/cacheflush.c +++ b/arch/nds32/mm/cacheflush.c @@ -45,7 +45,7 @@ void flush_icache_user_range(struct vm_area_struct *vma, struct page *page, flush_icache_range(kaddr, kaddr + len); kunmap_atomic((void *)kaddr); } -#ifndef CONFIG_CPU_CACHE_ALIASING + void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t * pte) { @@ -67,19 +67,15 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, if ((test_and_clear_bit(PG_dcache_dirty, &page->flags)) || (vma->vm_flags & VM_EXEC)) { - - if (!PageHighMem(page)) { - cpu_cache_wbinval_page((unsigned long) - page_address(page), - vma->vm_flags & VM_EXEC); - } else { - unsigned long kaddr = (unsigned long)kmap_atomic(page); - cpu_cache_wbinval_page(kaddr, vma->vm_flags & VM_EXEC); - kunmap_atomic((void *)kaddr); - } + unsigned long kaddr; + local_irq_save(flags); + kaddr = (unsigned long)kmap_atomic(page); + cpu_cache_wbinval_page(kaddr, vma->vm_flags & VM_EXEC); + kunmap_atomic((void *)kaddr); + local_irq_restore(flags); } } -#else +#ifdef CONFIG_CPU_CACHE_ALIASING extern pte_t va_present(struct mm_struct *mm, unsigned long addr); static inline unsigned long aliasing(unsigned long addr, unsigned long page) @@ -349,31 +345,4 @@ void invalidate_kernel_vmap_range(void *addr, int size) local_irq_restore(flags); } EXPORT_SYMBOL(invalidate_kernel_vmap_range); - -void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, - pte_t * pte) -{ - struct page *page; - unsigned long flags; - unsigned long pfn = pte_pfn(*pte); - - if (!pfn_valid(pfn)) - return; - - if (vma->vm_mm == current->active_mm) { - local_irq_save(flags); - __nds32__mtsr_dsb(addr, NDS32_SR_TLB_VPN); - __nds32__tlbop_rwr(*pte); - __nds32__isb(); - local_irq_restore(flags); - } - - page = pfn_to_page(pfn); - if (test_and_clear_bit(PG_dcache_dirty, &page->flags) || - (vma->vm_flags & VM_EXEC)) { - local_irq_save(flags); - cpu_dcache_wbinval_page((unsigned long)page_address(page)); - local_irq_restore(flags); - } -} #endif -- cgit v1.2.3 From 19103a4bfb42f320395daa5616ece3e89e759d63 Mon Sep 17 00:00:00 2001 From: "mpubbise@codeaurora.org" Date: Mon, 2 Jul 2018 15:40:14 +0530 Subject: mac80211: add stations tied to AP_VLANs during hw reconfig As part of hw reconfig, only stations linked to AP interfaces are added back to the driver ignoring those which are tied to AP_VLAN interfaces. It is true that there could be stations tied to the AP_VLAN interface while serving 4addr clients or when using AP_VLAN for VLAN operations; we should be adding these stations back to the driver as part of hw reconfig, failing to do so can cause functional issues. In the case of ath10k driver, the following errors were observed. ath10k_pci : failed to install key for non-existent peer XX:XX:XX:XX:XX:XX Workqueue: events_freezable ieee80211_restart_work [mac80211] (unwind_backtrace) from (show_stack+0x10/0x14) (show_stack) (dump_stack+0x80/0xa0) (dump_stack) (warn_slowpath_common+0x68/0x8c) (warn_slowpath_common) (warn_slowpath_null+0x18/0x20) (warn_slowpath_null) (ieee80211_enable_keys+0x88/0x154 [mac80211]) (ieee80211_enable_keys) (ieee80211_reconfig+0xc90/0x19c8 [mac80211]) (ieee80211_reconfig]) (ieee80211_restart_work+0x8c/0xa0 [mac80211]) (ieee80211_restart_work) (process_one_work+0x284/0x488) (process_one_work) (worker_thread+0x228/0x360) (worker_thread) (kthread+0xd8/0xec) (kthread) (ret_from_fork+0x14/0x24) Also while bringing down the AP VAP, WARN_ONs and errors related to peer removal were observed. ath10k_pci : failed to clear all peer wep keys for vdev 0: -2 ath10k_pci : failed to disassociate station: 8c:fd:f0:0a:8c:f5 vdev 0: -2 (unwind_backtrace) (show_stack+0x10/0x14) (show_stack) (dump_stack+0x80/0xa0) (dump_stack) (warn_slowpath_common+0x68/0x8c) (warn_slowpath_common) (warn_slowpath_null+0x18/0x20) (warn_slowpath_null) (sta_set_sinfo+0xb98/0xc9c [mac80211]) (sta_set_sinfo [mac80211]) (__sta_info_flush+0xf0/0x134 [mac80211]) (__sta_info_flush [mac80211]) (ieee80211_stop_ap+0xe8/0x390 [mac80211]) (ieee80211_stop_ap [mac80211]) (__cfg80211_stop_ap+0xe0/0x3dc [cfg80211]) (__cfg80211_stop_ap [cfg80211]) (cfg80211_stop_ap+0x30/0x44 [cfg80211]) (cfg80211_stop_ap [cfg80211]) (genl_rcv_msg+0x274/0x30c) (genl_rcv_msg) (netlink_rcv_skb+0x58/0xac) (netlink_rcv_skb) (genl_rcv+0x20/0x34) (genl_rcv) (netlink_unicast+0x11c/0x204) (netlink_unicast) (netlink_sendmsg+0x30c/0x370) (netlink_sendmsg) (sock_sendmsg+0x70/0x84) (sock_sendmsg) (___sys_sendmsg.part.3+0x188/0x228) (___sys_sendmsg.part.3) (__sys_sendmsg+0x4c/0x70) (__sys_sendmsg) (ret_fast_syscall+0x0/0x44) These issues got fixed by adding the stations which are tied to AP_VLANs back to the driver. Signed-off-by: Manikanta Pubbisetty Signed-off-by: Johannes Berg --- net/mac80211/util.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 5e2e511c4a6f..d02fbfec3783 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -2111,7 +2111,8 @@ int ieee80211_reconfig(struct ieee80211_local *local) if (!sta->uploaded) continue; - if (sta->sdata->vif.type != NL80211_IFTYPE_AP) + if (sta->sdata->vif.type != NL80211_IFTYPE_AP && + sta->sdata->vif.type != NL80211_IFTYPE_AP_VLAN) continue; for (state = IEEE80211_STA_NOTEXIST; -- cgit v1.2.3 From c643ecf354e25ceeae14add9064d4d6253d75577 Mon Sep 17 00:00:00 2001 From: Rishabh Bhatnagar Date: Mon, 2 Jul 2018 09:35:34 -0700 Subject: lib: rhashtable: Correct self-assignment in rhashtable.c In file lib/rhashtable.c line 777, skip variable is assigned to itself. The following error was observed: lib/rhashtable.c:777:41: warning: explicitly assigning value of variable of type 'int' to itself [-Wself-assign] error, forbidden warning: rhashtable.c:777 This error was found when compiling with Clang 6.0. Change it to iter->skip. Signed-off-by: Rishabh Bhatnagar Acked-by: Herbert Xu Reviewed-by: NeilBrown Signed-off-by: David S. Miller --- lib/rhashtable.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/rhashtable.c b/lib/rhashtable.c index 9427b5766134..3109b2e1d552 100644 --- a/lib/rhashtable.c +++ b/lib/rhashtable.c @@ -774,7 +774,7 @@ int rhashtable_walk_start_check(struct rhashtable_iter *iter) skip++; if (list == iter->list) { iter->p = p; - skip = skip; + iter->skip = skip; goto found; } } -- cgit v1.2.3 From 52ee6ef36ee10dd493cf2067311e56ca8015eb8d Mon Sep 17 00:00:00 2001 From: Doron Roberts-Kedes Date: Mon, 2 Jul 2018 10:25:05 -0700 Subject: tls: fix skb_to_sgvec returning unhandled error. The current code does not inspect the return value of skb_to_sgvec. This can cause a nullptr kernel panic when the malformed sgvec is passed into the crypto request. Checking the return value of skb_to_sgvec and skipping decryption if it is negative fixes this problem. Fixes: c46234ebb4d1 ("tls: RX path for ktls") Acked-by: Dave Watson Signed-off-by: Doron Roberts-Kedes Signed-off-by: David S. Miller --- net/tls/tls_sw.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/net/tls/tls_sw.c b/net/tls/tls_sw.c index d2380548f8f6..7818011fd250 100644 --- a/net/tls/tls_sw.c +++ b/net/tls/tls_sw.c @@ -701,6 +701,10 @@ static int decrypt_skb(struct sock *sk, struct sk_buff *skb, nsg = skb_to_sgvec(skb, &sgin[1], rxm->offset + tls_ctx->rx.prepend_size, rxm->full_len - tls_ctx->rx.prepend_size); + if (nsg < 0) { + ret = nsg; + goto out; + } tls_make_aad(ctx->rx_aad_ciphertext, rxm->full_len - tls_ctx->rx.overhead_size, @@ -712,6 +716,7 @@ static int decrypt_skb(struct sock *sk, struct sk_buff *skb, rxm->full_len - tls_ctx->rx.overhead_size, skb, sk->sk_allocation); +out: if (sgin != &sgin_arr[0]) kfree(sgin); -- cgit v1.2.3 From 2d0ec5440bef4a0a8858d52d45c31725540c3e74 Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Mon, 2 Jul 2018 22:49:35 +0200 Subject: r8169: fix mac address change Network core refuses to change mac address because flag IFF_LIVE_ADDR_CHANGE isn't set. Set this missing flag. Fixes: 1f7aa2bc268e ("r8169: simplify rtl_set_mac_address") Reported-by: Corinna Vinschen Signed-off-by: Heiner Kallweit Tested-by: Corinna Vinschen Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index f4cae2be0fda..a3f69901ac87 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -7789,6 +7789,7 @@ static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) NETIF_F_HW_VLAN_CTAG_RX; dev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO | NETIF_F_HIGHDMA; + dev->priv_flags |= IFF_LIVE_ADDR_CHANGE; tp->cp_cmd |= RxChkSum | RxVlan; -- cgit v1.2.3 From 2daf3d9962c5a11fb79fe17bae03125df5d60236 Mon Sep 17 00:00:00 2001 From: Bard Liao Date: Tue, 3 Jul 2018 13:07:25 +0800 Subject: ASoC: rt5682: add button detection mode control We are currently using power saving mode for button detection. However, it will impact the headset recording performance. This patch will switch button detection to normal mode in capture and switch to power saving mode in the end of capture. Signed-off-by: Bard Liao Signed-off-by: Mark Brown --- sound/soc/codecs/rt5682.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/sound/soc/codecs/rt5682.c b/sound/soc/codecs/rt5682.c index baad177908ab..640d400ca013 100644 --- a/sound/soc/codecs/rt5682.c +++ b/sound/soc/codecs/rt5682.c @@ -857,6 +857,8 @@ static int rt5682_button_detect(struct snd_soc_component *component) btn_type = val & 0xfff0; snd_soc_component_write(component, RT5682_4BTN_IL_CMD_1, val); pr_debug("%s btn_type=%x\n", __func__, btn_type); + snd_soc_component_update_bits(component, + RT5682_SAR_IL_CMD_2, 0x10, 0x10); return btn_type; } @@ -1645,6 +1647,8 @@ static const struct snd_soc_dapm_widget rt5682_dapm_widgets[] = { SND_SOC_DAPM_MIXER("Stereo1 ADC MIXR", RT5682_STO1_ADC_DIG_VOL, RT5682_R_MUTE_SFT, 1, rt5682_sto1_adc_r_mix, ARRAY_SIZE(rt5682_sto1_adc_r_mix)), + SND_SOC_DAPM_SUPPLY("BTN Detection Mode", RT5682_SAR_IL_CMD_1, + 14, 1, NULL, 0), /* ADC PGA */ SND_SOC_DAPM_PGA("Stereo1 ADC MIX", SND_SOC_NOPM, 0, 0, NULL, 0), @@ -1807,6 +1811,8 @@ static const struct snd_soc_dapm_route rt5682_dapm_routes[] = { {"Stereo1 ADC MIXR", "ADC2 Switch", "Stereo1 ADC R2 Mux"}, {"Stereo1 ADC MIXR", NULL, "ADC Stereo1 Filter"}, + {"ADC Stereo1 Filter", NULL, "BTN Detection Mode"}, + {"Stereo1 ADC MIX", NULL, "Stereo1 ADC MIXL"}, {"Stereo1 ADC MIX", NULL, "Stereo1 ADC MIXR"}, -- cgit v1.2.3 From 1b8fc56ed514f815c4779273348c3308fb263c87 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Tue, 3 Jul 2018 15:28:44 +0200 Subject: ASoC: es7241: add dt-bindings documentation for the es7241 adc Signed-off-by: Jerome Brunet Signed-off-by: Mark Brown --- .../devicetree/bindings/sound/everest,es7241.txt | 28 ++++++++++++++++++++++ 1 file changed, 28 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/everest,es7241.txt diff --git a/Documentation/devicetree/bindings/sound/everest,es7241.txt b/Documentation/devicetree/bindings/sound/everest,es7241.txt new file mode 100644 index 000000000000..28f82cf4959f --- /dev/null +++ b/Documentation/devicetree/bindings/sound/everest,es7241.txt @@ -0,0 +1,28 @@ +ES7241 i2s AD converter + +Required properties: +- compatible : "everest,es7241" +- VDDP-supply: regulator phandle for the VDDA supply +- VDDA-supply: regulator phandle for the VDDP supply +- VDDD-supply: regulator phandle for the VDDD supply + +Optional properties: +- reset-gpios: gpio connected to the reset pin +- m0-gpios : gpio connected to the m0 pin +- m1-gpios : gpio connected to the m1 pin +- everest,sdout-pull-down: + Format used by the serial interface is controlled by pulling + the sdout. If the sdout is pulled down, leftj format is used. + If this property is not provided, sdout is assumed to pulled + up and i2s format is used + +Example: + +linein: audio-codec@2 { + #sound-dai-cells = <0>; + compatible = "everest,es7241"; + VDDA-supply = <&vcc_3v3>; + VDDP-supply = <&vcc_3v3>; + VDDD-supply = <&vcc_3v3>; + reset-gpios = <&gpio GPIOH_42>; +}; -- cgit v1.2.3 From 5f7bdc466c772b3af3145a71724965ecdc03e6bf Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Tue, 3 Jul 2018 15:28:45 +0200 Subject: ASoC: es7241: add es7241 codec support Add support for the everest es7241 which is a simple 2 channels analog to digital converter. Signed-off-by: Jerome Brunet Signed-off-by: Mark Brown --- sound/soc/codecs/Kconfig | 4 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/es7241.c | 322 ++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 328 insertions(+) create mode 100644 sound/soc/codecs/es7241.c diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 6d1674699385..efb095dbcd71 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -79,6 +79,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_ES8328_SPI if SPI_MASTER select SND_SOC_ES8328_I2C if I2C select SND_SOC_ES7134 + select SND_SOC_ES7241 select SND_SOC_GTM601 select SND_SOC_HDAC_HDMI select SND_SOC_ICS43432 @@ -585,6 +586,9 @@ config SND_SOC_HDMI_CODEC config SND_SOC_ES7134 tristate "Everest Semi ES7134 CODEC" +config SND_SOC_ES7241 + tristate "Everest Semi ES7241 CODEC" + config SND_SOC_ES8316 tristate "Everest Semi ES8316 CODEC" depends on I2C diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index f26ded89a1e5..7ae7c85e8219 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -71,6 +71,7 @@ snd-soc-da732x-objs := da732x.o snd-soc-da9055-objs := da9055.o snd-soc-dmic-objs := dmic.o snd-soc-es7134-objs := es7134.o +snd-soc-es7241-objs := es7241.o snd-soc-es8316-objs := es8316.o snd-soc-es8328-objs := es8328.o snd-soc-es8328-i2c-objs := es8328-i2c.o @@ -330,6 +331,7 @@ obj-$(CONFIG_SND_SOC_DA732X) += snd-soc-da732x.o obj-$(CONFIG_SND_SOC_DA9055) += snd-soc-da9055.o obj-$(CONFIG_SND_SOC_DMIC) += snd-soc-dmic.o obj-$(CONFIG_SND_SOC_ES7134) += snd-soc-es7134.o +obj-$(CONFIG_SND_SOC_ES7241) += snd-soc-es7241.o obj-$(CONFIG_SND_SOC_ES8316) += snd-soc-es8316.o obj-$(CONFIG_SND_SOC_ES8328) += snd-soc-es8328.o obj-$(CONFIG_SND_SOC_ES8328_I2C)+= snd-soc-es8328-i2c.o diff --git a/sound/soc/codecs/es7241.c b/sound/soc/codecs/es7241.c new file mode 100644 index 000000000000..87991bd4acef --- /dev/null +++ b/sound/soc/codecs/es7241.c @@ -0,0 +1,322 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright (c) 2018 BayLibre, SAS. +// Author: Jerome Brunet + +#include +#include +#include +#include + +struct es7241_clock_mode { + unsigned int rate_min; + unsigned int rate_max; + unsigned int *slv_mfs; + unsigned int slv_mfs_num; + unsigned int mst_mfs; + unsigned int mst_m0:1; + unsigned int mst_m1:1; +}; + +struct es7241_chip { + const struct es7241_clock_mode *modes; + unsigned int mode_num; +}; + +struct es7241_data { + struct gpio_desc *reset; + struct gpio_desc *m0; + struct gpio_desc *m1; + unsigned int fmt; + unsigned int mclk; + bool is_slave; + const struct es7241_chip *chip; +}; + +static void es7241_set_mode(struct es7241_data *priv, int m0, int m1) +{ + /* put the device in reset */ + gpiod_set_value_cansleep(priv->reset, 0); + + /* set the mode */ + gpiod_set_value_cansleep(priv->m0, m0); + gpiod_set_value_cansleep(priv->m1, m1); + + /* take the device out of reset - datasheet does not specify a delay */ + gpiod_set_value_cansleep(priv->reset, 1); +} + +static int es7241_set_slave_mode(struct es7241_data *priv, + const struct es7241_clock_mode *mode, + unsigned int mfs) +{ + int j; + + if (!mfs) + goto out_ok; + + for (j = 0; j < mode->slv_mfs_num; j++) { + if (mode->slv_mfs[j] == mfs) + goto out_ok; + } + + return -EINVAL; + +out_ok: + es7241_set_mode(priv, 1, 1); + return 0; +} + +static int es7241_set_master_mode(struct es7241_data *priv, + const struct es7241_clock_mode *mode, + unsigned int mfs) +{ + /* + * We can't really set clock ratio, if the mclk/lrclk is different + * from what we provide, then error out + */ + if (mfs && mfs != mode->mst_mfs) + return -EINVAL; + + es7241_set_mode(priv, mode->mst_m0, mode->mst_m1); + + return 0; +} + +static int es7241_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct es7241_data *priv = snd_soc_dai_get_drvdata(dai); + unsigned int rate = params_rate(params); + unsigned int mfs = priv->mclk / rate; + int i; + + for (i = 0; i < priv->chip->mode_num; i++) { + const struct es7241_clock_mode *mode = &priv->chip->modes[i]; + + if (rate < mode->rate_min || rate >= mode->rate_max) + continue; + + if (priv->is_slave) + return es7241_set_slave_mode(priv, mode, mfs); + else + return es7241_set_master_mode(priv, mode, mfs); + } + + /* should not happen */ + dev_err(dai->dev, "unsupported rate: %u\n", rate); + return -EINVAL; +} + +static int es7241_set_sysclk(struct snd_soc_dai *dai, int clk_id, + unsigned int freq, int dir) +{ + struct es7241_data *priv = snd_soc_dai_get_drvdata(dai); + + if (dir == SND_SOC_CLOCK_IN && clk_id == 0) { + priv->mclk = freq; + return 0; + } + + return -ENOTSUPP; +} + +static int es7241_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) +{ + struct es7241_data *priv = snd_soc_dai_get_drvdata(dai); + + if ((fmt & SND_SOC_DAIFMT_INV_MASK) != SND_SOC_DAIFMT_NB_NF) { + dev_err(dai->dev, "Unsupported dai clock inversion\n"); + return -EINVAL; + } + + if ((fmt & SND_SOC_DAIFMT_FORMAT_MASK) != priv->fmt) { + dev_err(dai->dev, "Invalid dai format\n"); + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBS_CFS: + priv->is_slave = true; + break; + case SND_SOC_DAIFMT_CBM_CFM: + priv->is_slave = false; + break; + + default: + dev_err(dai->dev, "Unsupported clock configuration\n"); + return -EINVAL; + } + + return 0; +} + +static const struct snd_soc_dai_ops es7241_dai_ops = { + .set_fmt = es7241_set_fmt, + .hw_params = es7241_hw_params, + .set_sysclk = es7241_set_sysclk, +}; + +static struct snd_soc_dai_driver es7241_dai = { + .name = "es7241-hifi", + .capture = { + .stream_name = "Capture", + .channels_min = 2, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_8000_192000, + .formats = (SNDRV_PCM_FMTBIT_S16_LE | + SNDRV_PCM_FMTBIT_S24_3LE | + SNDRV_PCM_FMTBIT_S24_LE), + }, + .ops = &es7241_dai_ops, +}; + +static const struct es7241_clock_mode es7241_modes[] = { + { + /* Single speed mode */ + .rate_min = 8000, + .rate_max = 50000, + .slv_mfs = (unsigned int[]) { 256, 384, 512, 768, 1024 }, + .slv_mfs_num = 5, + .mst_mfs = 256, + .mst_m0 = 0, + .mst_m1 = 0, + }, { + /* Double speed mode */ + .rate_min = 50000, + .rate_max = 100000, + .slv_mfs = (unsigned int[]) { 128, 192 }, + .slv_mfs_num = 2, + .mst_mfs = 128, + .mst_m0 = 1, + .mst_m1 = 0, + }, { + /* Quad speed mode */ + .rate_min = 100000, + .rate_max = 200000, + .slv_mfs = (unsigned int[]) { 64 }, + .slv_mfs_num = 1, + .mst_mfs = 64, + .mst_m0 = 0, + .mst_m1 = 1, + }, +}; + +static const struct es7241_chip es7241_chip = { + .modes = es7241_modes, + .mode_num = ARRAY_SIZE(es7241_modes), +}; + +static const struct snd_soc_dapm_widget es7241_dapm_widgets[] = { + SND_SOC_DAPM_INPUT("AINL"), + SND_SOC_DAPM_INPUT("AINR"), + SND_SOC_DAPM_DAC("ADC", "Capture", SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_REGULATOR_SUPPLY("VDDP", 0, 0), + SND_SOC_DAPM_REGULATOR_SUPPLY("VDDD", 0, 0), + SND_SOC_DAPM_REGULATOR_SUPPLY("VDDA", 0, 0), +}; + +static const struct snd_soc_dapm_route es7241_dapm_routes[] = { + { "ADC", NULL, "AINL", }, + { "ADC", NULL, "AINR", }, + { "ADC", NULL, "VDDA", }, + { "Capture", NULL, "VDDP", }, + { "Capture", NULL, "VDDD", }, +}; + +static const struct snd_soc_component_driver es7241_component_driver = { + .dapm_widgets = es7241_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(es7241_dapm_widgets), + .dapm_routes = es7241_dapm_routes, + .num_dapm_routes = ARRAY_SIZE(es7241_dapm_routes), + .idle_bias_on = 1, + .endianness = 1, + .non_legacy_dai_naming = 1, +}; + +static void es7241_parse_fmt(struct device *dev, struct es7241_data *priv) +{ + bool is_leftj; + + /* + * The format is given by a pull resistor on the SDOUT pin: + * pull-up for i2s, pull-down for left justified. + */ + is_leftj = of_property_read_bool(dev->of_node, + "everest,sdout-pull-down"); + if (is_leftj) + priv->fmt = SND_SOC_DAIFMT_LEFT_J; + else + priv->fmt = SND_SOC_DAIFMT_I2S; +} + +static int es7241_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct es7241_data *priv; + int err; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + platform_set_drvdata(pdev, priv); + + priv->chip = of_device_get_match_data(dev); + if (!priv->chip) { + dev_err(dev, "failed to match device\n"); + return -ENODEV; + } + + es7241_parse_fmt(dev, priv); + + priv->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(priv->reset)) { + err = PTR_ERR(priv->reset); + if (err != -EPROBE_DEFER) + dev_err(dev, "Failed to get 'reset' gpio: %d", err); + return err; + } + + priv->m0 = devm_gpiod_get_optional(dev, "m0", GPIOD_OUT_LOW); + if (IS_ERR(priv->m0)) { + err = PTR_ERR(priv->m0); + if (err != -EPROBE_DEFER) + dev_err(dev, "Failed to get 'm0' gpio: %d", err); + return err; + } + + priv->m1 = devm_gpiod_get_optional(dev, "m1", GPIOD_OUT_LOW); + if (IS_ERR(priv->m1)) { + err = PTR_ERR(priv->m1); + if (err != -EPROBE_DEFER) + dev_err(dev, "Failed to get 'm1' gpio: %d", err); + return err; + } + + return devm_snd_soc_register_component(&pdev->dev, + &es7241_component_driver, + &es7241_dai, 1); +} + +#ifdef CONFIG_OF +static const struct of_device_id es7241_ids[] = { + { .compatible = "everest,es7241", .data = &es7241_chip }, + { } +}; +MODULE_DEVICE_TABLE(of, es7241_ids); +#endif + +static struct platform_driver es7241_driver = { + .driver = { + .name = "es7241", + .of_match_table = of_match_ptr(es7241_ids), + }, + .probe = es7241_probe, +}; + +module_platform_driver(es7241_driver); + +MODULE_DESCRIPTION("ASoC ES7241 audio codec driver"); +MODULE_AUTHOR("Jerome Brunet "); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From e0431de301cbb8e3915261dfff4d0b072738de69 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Mon, 2 Jul 2018 07:17:07 -0500 Subject: ASoC: pxa-ssp: mark expected switch fall-through In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva Signed-off-by: Mark Brown --- sound/soc/pxa/pxa-ssp.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c index f8339bb01251..ff1e0bd8d407 100644 --- a/sound/soc/pxa/pxa-ssp.c +++ b/sound/soc/pxa/pxa-ssp.c @@ -470,6 +470,7 @@ static int pxa_ssp_configure_dai_fmt(struct ssp_priv *priv) case SND_SOC_DAIFMT_DSP_A: sspsp |= SSPSP_FSRT; + /* fall through */ case SND_SOC_DAIFMT_DSP_B: sscr0 |= SSCR0_MOD | SSCR0_PSP; sscr1 |= SSCR1_TRAIL | SSCR1_RWOT; -- cgit v1.2.3 From 30896d3619bd80486a3f8a75d62ea3b58fc61ad5 Mon Sep 17 00:00:00 2001 From: Daniel Kurtz Date: Mon, 2 Jul 2018 15:19:50 -0600 Subject: ASoC: AMD: Always stop ch2 first Commit 6b116dfb4633a ("ASoC: AMD: make channel 1 dma as circular") made both channels circular, so this comment and logic no longer applies. Always stop ch2 (the channel closest to the output) before ch1. This ensures that the downstream circular DMA channel does not continue to play/capture repeated samples after the upstream circular DMA channel has already stopped. Signed-off-by: Daniel Kurtz Signed-off-by: Mark Brown --- sound/soc/amd/acp-pcm-dma.c | 17 ++--------------- 1 file changed, 2 insertions(+), 15 deletions(-) diff --git a/sound/soc/amd/acp-pcm-dma.c b/sound/soc/amd/acp-pcm-dma.c index 3c3d398d0d0b..4665ae12e74e 100644 --- a/sound/soc/amd/acp-pcm-dma.c +++ b/sound/soc/amd/acp-pcm-dma.c @@ -1067,21 +1067,8 @@ static int acp_dma_trigger(struct snd_pcm_substream *substream, int cmd) case SNDRV_PCM_TRIGGER_STOP: case SNDRV_PCM_TRIGGER_PAUSE_PUSH: case SNDRV_PCM_TRIGGER_SUSPEND: - /* For playback, non circular dma should be stopped first - * i.e Sysram to acp dma transfer channel(rtd->ch1) should be - * stopped before stopping cirular dma which is acp sram to i2s - * fifo dma transfer channel(rtd->ch2). Where as in Capture - * scenario, i2s fifo to acp sram dma channel(rtd->ch2) stopped - * first before stopping acp sram to sysram which is circular - * dma(rtd->ch1). - */ - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { - acp_dma_stop(rtd->acp_mmio, rtd->ch1); - ret = acp_dma_stop(rtd->acp_mmio, rtd->ch2); - } else { - acp_dma_stop(rtd->acp_mmio, rtd->ch2); - ret = acp_dma_stop(rtd->acp_mmio, rtd->ch1); - } + acp_dma_stop(rtd->acp_mmio, rtd->ch2); + ret = acp_dma_stop(rtd->acp_mmio, rtd->ch1); rtd->bytescount = 0; break; default: -- cgit v1.2.3 From 715cdce04487fb23d5c10693b3bc01309fea955a Mon Sep 17 00:00:00 2001 From: Daniel Kurtz Date: Mon, 2 Jul 2018 15:19:52 -0600 Subject: ASoC: AMD: Always subtract bytescount It is always correct to subtract out the starting bytescount value. Even in the case of 2^64 byte rollover (292 Million Years in the future @ 48000 Hz) the math still works out. Signed-off-by: Daniel Kurtz Signed-off-by: Mark Brown --- sound/soc/amd/acp-pcm-dma.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/sound/soc/amd/acp-pcm-dma.c b/sound/soc/amd/acp-pcm-dma.c index 4665ae12e74e..034fac3de037 100644 --- a/sound/soc/amd/acp-pcm-dma.c +++ b/sound/soc/amd/acp-pcm-dma.c @@ -995,8 +995,7 @@ static snd_pcm_uframes_t acp_dma_pointer(struct snd_pcm_substream *substream) buffersize = frames_to_bytes(runtime, runtime->buffer_size); bytescount = acp_get_byte_count(rtd); - if (bytescount > rtd->bytescount) - bytescount -= rtd->bytescount; + bytescount -= rtd->bytescount; pos = do_div(bytescount, buffersize); return bytes_to_frames(runtime, pos); } -- cgit v1.2.3 From 55af49ac1b8627dfbfa2689af118d994d7a0ba1b Mon Sep 17 00:00:00 2001 From: Daniel Kurtz Date: Mon, 2 Jul 2018 15:19:53 -0600 Subject: ASoC: AMD: Fix Capture DMA channel names On capture, audio data is first copied from I2S to ACP memory, and then to SYSRAM. For each step the channel number increases, so the names in the driver were wrong. Signed-off-by: Daniel Kurtz Signed-off-by: Mark Brown --- sound/soc/amd/acp-pcm-dma.c | 24 ++++++++++++------------ sound/soc/amd/acp.h | 8 ++++---- 2 files changed, 16 insertions(+), 16 deletions(-) diff --git a/sound/soc/amd/acp-pcm-dma.c b/sound/soc/amd/acp-pcm-dma.c index 034fac3de037..df53412967e1 100644 --- a/sound/soc/amd/acp-pcm-dma.c +++ b/sound/soc/amd/acp-pcm-dma.c @@ -697,31 +697,31 @@ static irqreturn_t dma_irq_handler(int irq, void *arg) acp_mmio, mmACP_EXTERNAL_INTR_STAT); } - if ((intr_flag & BIT(I2S_TO_ACP_DMA_CH_NUM)) != 0) { + if ((intr_flag & BIT(ACP_TO_SYSRAM_CH_NUM)) != 0) { valid_irq = true; snd_pcm_period_elapsed(irq_data->capture_i2ssp_stream); - acp_reg_write((intr_flag & BIT(I2S_TO_ACP_DMA_CH_NUM)) << 16, + acp_reg_write((intr_flag & BIT(ACP_TO_SYSRAM_CH_NUM)) << 16, acp_mmio, mmACP_EXTERNAL_INTR_STAT); } - if ((intr_flag & BIT(ACP_TO_SYSRAM_CH_NUM)) != 0) { + if ((intr_flag & BIT(I2S_TO_ACP_DMA_CH_NUM)) != 0) { valid_irq = true; - acp_reg_write((intr_flag & BIT(ACP_TO_SYSRAM_CH_NUM)) << 16, + acp_reg_write((intr_flag & BIT(I2S_TO_ACP_DMA_CH_NUM)) << 16, acp_mmio, mmACP_EXTERNAL_INTR_STAT); } - if ((intr_flag & BIT(I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM)) != 0) { + if ((intr_flag & BIT(ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM)) != 0) { valid_irq = true; snd_pcm_period_elapsed(irq_data->capture_i2sbt_stream); acp_reg_write((intr_flag & - BIT(I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM)) << 16, + BIT(ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM)) << 16, acp_mmio, mmACP_EXTERNAL_INTR_STAT); } - if ((intr_flag & BIT(ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM)) != 0) { + if ((intr_flag & BIT(I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM)) != 0) { valid_irq = true; acp_reg_write((intr_flag & - BIT(ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM)) << 16, + BIT(I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM)) << 16, acp_mmio, mmACP_EXTERNAL_INTR_STAT); } @@ -899,8 +899,8 @@ static int acp_dma_hw_params(struct snd_pcm_substream *substream, switch (rtd->i2s_instance) { case I2S_BT_INSTANCE: rtd->pte_offset = ACP_ST_BT_CAPTURE_PTE_OFFSET; - rtd->ch1 = ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM; - rtd->ch2 = I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM; + rtd->ch1 = I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM; + rtd->ch2 = ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM; rtd->sram_bank = ACP_SRAM_BANK_4_ADDRESS; rtd->destination = FROM_BLUETOOTH; rtd->dma_dscr_idx_1 = CAPTURE_START_DMA_DESCR_CH10; @@ -914,8 +914,8 @@ static int acp_dma_hw_params(struct snd_pcm_substream *substream, case I2S_SP_INSTANCE: default: rtd->pte_offset = ACP_CAPTURE_PTE_OFFSET; - rtd->ch1 = ACP_TO_SYSRAM_CH_NUM; - rtd->ch2 = I2S_TO_ACP_DMA_CH_NUM; + rtd->ch1 = I2S_TO_ACP_DMA_CH_NUM; + rtd->ch2 = ACP_TO_SYSRAM_CH_NUM; switch (adata->asic_type) { case CHIP_STONEY: rtd->pte_offset = ACP_ST_CAPTURE_PTE_OFFSET; diff --git a/sound/soc/amd/acp.h b/sound/soc/amd/acp.h index 3190fdce6307..0a2240bff62e 100644 --- a/sound/soc/amd/acp.h +++ b/sound/soc/amd/acp.h @@ -74,16 +74,16 @@ #define ACP_TO_I2S_DMA_CH_NUM 13 /* Capture DMA channels */ -#define ACP_TO_SYSRAM_CH_NUM 14 -#define I2S_TO_ACP_DMA_CH_NUM 15 +#define I2S_TO_ACP_DMA_CH_NUM 14 +#define ACP_TO_SYSRAM_CH_NUM 15 /* Playback DMA Channels for I2S BT instance */ #define SYSRAM_TO_ACP_BT_INSTANCE_CH_NUM 8 #define ACP_TO_I2S_DMA_BT_INSTANCE_CH_NUM 9 /* Capture DMA Channels for I2S BT Instance */ -#define ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM 10 -#define I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM 11 +#define I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM 10 +#define ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM 11 #define NUM_DSCRS_PER_CHANNEL 2 -- cgit v1.2.3 From 8c6b964eddd2c39a9796899b2be099ece1b6c6ca Mon Sep 17 00:00:00 2001 From: Daniel Kurtz Date: Mon, 2 Jul 2018 15:19:54 -0600 Subject: ASoC: AMD: Do not generate interrups for every captured sample On capture, audio data is first copied from I2S to ACP memory, and then from ACP to SYSRAM. The I2S_TO_ACP_DMA interrupt fires on every sample transferred from I2S to ACP memory. That is it fires ~48000 times per second when capturing @ 48 kHz. Since we don't do anything on this interrupt anyway, disable it to save quite a few unnecessary interrupts. The real "work" (calling snd_pcm_period_elapsed()) is done when transfer from ACP to SYSRAM is complete. Signed-off-by: Daniel Kurtz Signed-off-by: Mark Brown --- sound/soc/amd/acp-pcm-dma.c | 15 --------------- 1 file changed, 15 deletions(-) diff --git a/sound/soc/amd/acp-pcm-dma.c b/sound/soc/amd/acp-pcm-dma.c index df53412967e1..cd4d2520ac14 100644 --- a/sound/soc/amd/acp-pcm-dma.c +++ b/sound/soc/amd/acp-pcm-dma.c @@ -412,10 +412,8 @@ static void acp_dma_start(void __iomem *acp_mmio, u16 ch_num) switch (ch_num) { case ACP_TO_I2S_DMA_CH_NUM: case ACP_TO_SYSRAM_CH_NUM: - case I2S_TO_ACP_DMA_CH_NUM: case ACP_TO_I2S_DMA_BT_INSTANCE_CH_NUM: case ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM: - case I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM: dma_ctrl |= ACP_DMA_CNTL_0__DMAChIOCEn_MASK; break; default: @@ -704,12 +702,6 @@ static irqreturn_t dma_irq_handler(int irq, void *arg) acp_mmio, mmACP_EXTERNAL_INTR_STAT); } - if ((intr_flag & BIT(I2S_TO_ACP_DMA_CH_NUM)) != 0) { - valid_irq = true; - acp_reg_write((intr_flag & BIT(I2S_TO_ACP_DMA_CH_NUM)) << 16, - acp_mmio, mmACP_EXTERNAL_INTR_STAT); - } - if ((intr_flag & BIT(ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM)) != 0) { valid_irq = true; snd_pcm_period_elapsed(irq_data->capture_i2sbt_stream); @@ -718,13 +710,6 @@ static irqreturn_t dma_irq_handler(int irq, void *arg) acp_mmio, mmACP_EXTERNAL_INTR_STAT); } - if ((intr_flag & BIT(I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM)) != 0) { - valid_irq = true; - acp_reg_write((intr_flag & - BIT(I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM)) << 16, - acp_mmio, mmACP_EXTERNAL_INTR_STAT); - } - if (valid_irq) return IRQ_HANDLED; else -- cgit v1.2.3 From 1a337a1e7885085d224583c766614e5945bde671 Mon Sep 17 00:00:00 2001 From: Daniel Kurtz Date: Mon, 2 Jul 2018 15:19:51 -0600 Subject: ASoC: AMD: Reset bytescount when starting transaction The pointer() callback gets its value by reading the I2S BYTE_COUNT register. This is a 64-bit runnning transaction counter. If a transaction was aborted in the middle of a sample buffer, the counter will stop counting on a number divisible by the buffer size. Since we actually use it as a pointer into an aligned buffer, however, we do want to ensure that it always starts at a number divisible by the buffer size when starting a transaction, hence we reset it whenever starting a transaction. To accomplish this, it wasn't necessary to zero bytescount at the termination of each transaction, so remove this unnecessary code. Signed-off-by: Daniel Kurtz Signed-off-by: Mark Brown --- sound/soc/amd/acp-pcm-dma.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/sound/soc/amd/acp-pcm-dma.c b/sound/soc/amd/acp-pcm-dma.c index cd4d2520ac14..ab60129f4f26 100644 --- a/sound/soc/amd/acp-pcm-dma.c +++ b/sound/soc/amd/acp-pcm-dma.c @@ -1013,7 +1013,6 @@ static int acp_dma_prepare(struct snd_pcm_substream *substream) static int acp_dma_trigger(struct snd_pcm_substream *substream, int cmd) { int ret; - u64 bytescount = 0; struct snd_pcm_runtime *runtime = substream->runtime; struct audio_substream_data *rtd = runtime->private_data; @@ -1024,9 +1023,7 @@ static int acp_dma_trigger(struct snd_pcm_substream *substream, int cmd) case SNDRV_PCM_TRIGGER_START: case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: case SNDRV_PCM_TRIGGER_RESUME: - bytescount = acp_get_byte_count(rtd); - if (rtd->bytescount == 0) - rtd->bytescount = bytescount; + rtd->bytescount = acp_get_byte_count(rtd); if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { acp_dma_start(rtd->acp_mmio, rtd->ch1); acp_dma_start(rtd->acp_mmio, rtd->ch2); @@ -1053,7 +1050,6 @@ static int acp_dma_trigger(struct snd_pcm_substream *substream, int cmd) case SNDRV_PCM_TRIGGER_SUSPEND: acp_dma_stop(rtd->acp_mmio, rtd->ch2); ret = acp_dma_stop(rtd->acp_mmio, rtd->ch1); - rtd->bytescount = 0; break; default: ret = -EINVAL; -- cgit v1.2.3 From df61f9f76609456efbc60d495b3235baf7d07691 Mon Sep 17 00:00:00 2001 From: Daniel Kurtz Date: Mon, 2 Jul 2018 15:19:55 -0600 Subject: ASoC: AMD: Simplify trigger handler Now that the I2S channel names are fixed, and DMA data flow order is consistent (ch1 then ch2), we can simplify channel start order: start the upstream channel and then the downstream channel for both playback and capture cases. Signed-off-by: Daniel Kurtz Signed-off-by: Mark Brown --- sound/soc/amd/acp-pcm-dma.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/sound/soc/amd/acp-pcm-dma.c b/sound/soc/amd/acp-pcm-dma.c index ab60129f4f26..65c1033bd51c 100644 --- a/sound/soc/amd/acp-pcm-dma.c +++ b/sound/soc/amd/acp-pcm-dma.c @@ -1024,10 +1024,7 @@ static int acp_dma_trigger(struct snd_pcm_substream *substream, int cmd) case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: case SNDRV_PCM_TRIGGER_RESUME: rtd->bytescount = acp_get_byte_count(rtd); - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { - acp_dma_start(rtd->acp_mmio, rtd->ch1); - acp_dma_start(rtd->acp_mmio, rtd->ch2); - } else { + if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) { if (rtd->capture_channel == CAP_CHANNEL0) { acp_dma_cap_channel_disable(rtd->acp_mmio, CAP_CHANNEL1); @@ -1040,9 +1037,9 @@ static int acp_dma_trigger(struct snd_pcm_substream *substream, int cmd) acp_dma_cap_channel_enable(rtd->acp_mmio, CAP_CHANNEL1); } - acp_dma_start(rtd->acp_mmio, rtd->ch2); - acp_dma_start(rtd->acp_mmio, rtd->ch1); } + acp_dma_start(rtd->acp_mmio, rtd->ch1); + acp_dma_start(rtd->acp_mmio, rtd->ch2); ret = 0; break; case SNDRV_PCM_TRIGGER_STOP: -- cgit v1.2.3 From c9445d94d7fc60e7b0290df9e109daef85d26bd4 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Tue, 3 Jul 2018 17:05:58 +0200 Subject: ASoC: es7134: update DT binding with new compatible and supplies Update the documentation to add support for the es7154 and optional power supplies phandles. Signed-off-by: Jerome Brunet Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/everest,es7134.txt | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/sound/everest,es7134.txt b/Documentation/devicetree/bindings/sound/everest,es7134.txt index 5495a3cb8b7b..091666069bde 100644 --- a/Documentation/devicetree/bindings/sound/everest,es7134.txt +++ b/Documentation/devicetree/bindings/sound/everest,es7134.txt @@ -1,10 +1,15 @@ ES7134 i2s DA converter Required properties: -- compatible : "everest,es7134" or "everest,es7144" +- compatible : "everest,es7134" or + "everest,es7144" or + "everest,es7154" +- VDD-supply : regulator phandle for the VDD supply +- PVDD-supply: regulator phandle for the PVDD supply for the es7154 Example: i2s_codec: external-codec { compatible = "everest,es7134"; + VDD-supply = <&vcc_5v>; }; -- cgit v1.2.3 From 30ddfffd10b73d5d960650ea70b33a8ee0562679 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Tue, 3 Jul 2018 17:05:59 +0200 Subject: ASoC: es7134: correct required power supplies Drop AVDD in favor of PVDD to match the names used in the datasheet and only claim PVDD on the es7154. The es7134 and es7144 don't have a separate supply for the digital I/O. Signed-off-by: Jerome Brunet Signed-off-by: Mark Brown --- sound/soc/codecs/es7134.c | 44 +++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 41 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/es7134.c b/sound/soc/codecs/es7134.c index 5ad59c38fed1..80f2936cefed 100644 --- a/sound/soc/codecs/es7134.c +++ b/sound/soc/codecs/es7134.c @@ -35,6 +35,10 @@ struct es7134_clock_mode { struct es7134_chip { const struct es7134_clock_mode *modes; unsigned int mode_num; + const struct snd_soc_dapm_widget *extra_widgets; + unsigned int extra_widget_num; + const struct snd_soc_dapm_route *extra_routes; + unsigned int extra_route_num; }; struct es7134_data { @@ -110,6 +114,34 @@ static int es7134_set_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) return 0; } +static int es7134_component_probe(struct snd_soc_component *c) +{ + struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(c); + struct es7134_data *priv = snd_soc_component_get_drvdata(c); + const struct es7134_chip *chip = priv->chip; + int ret; + + if (chip->extra_widget_num) { + ret = snd_soc_dapm_new_controls(dapm, chip->extra_widgets, + chip->extra_widget_num); + if (ret) { + dev_err(c->dev, "failed to add extra widgets\n"); + return ret; + } + } + + if (chip->extra_route_num) { + ret = snd_soc_dapm_add_routes(dapm, chip->extra_routes, + chip->extra_route_num); + if (ret) { + dev_err(c->dev, "failed to add extra routes\n"); + return ret; + } + } + + return 0; +} + static const struct snd_soc_dai_ops es7134_dai_ops = { .set_fmt = es7134_set_fmt, .hw_params = es7134_hw_params, @@ -158,9 +190,16 @@ static const struct es7134_clock_mode es7134_modes[] = { }, }; +/* Digital I/O are also supplied by VDD on the es7134 */ +static const struct snd_soc_dapm_route es7134_extra_routes[] = { + { "Playback", NULL, "VDD", } +}; + static const struct es7134_chip es7134_chip = { .modes = es7134_modes, .mode_num = ARRAY_SIZE(es7134_modes), + .extra_routes = es7134_extra_routes, + .extra_route_num = ARRAY_SIZE(es7134_extra_routes), }; static const struct snd_soc_dapm_widget es7134_dapm_widgets[] = { @@ -168,17 +207,16 @@ static const struct snd_soc_dapm_widget es7134_dapm_widgets[] = { SND_SOC_DAPM_OUTPUT("AOUTR"), SND_SOC_DAPM_DAC("DAC", "Playback", SND_SOC_NOPM, 0, 0), SND_SOC_DAPM_REGULATOR_SUPPLY("VDD", 0, 0), - SND_SOC_DAPM_REGULATOR_SUPPLY("AVDD", 0, 0), }; static const struct snd_soc_dapm_route es7134_dapm_routes[] = { { "AOUTL", NULL, "DAC" }, { "AOUTR", NULL, "DAC" }, - { "Playback", NULL, "VDD" }, - { "DAC", NULL, "AVDD" }, + { "DAC", NULL, "VDD" }, }; static const struct snd_soc_component_driver es7134_component_driver = { + .probe = es7134_component_probe, .dapm_widgets = es7134_dapm_widgets, .num_dapm_widgets = ARRAY_SIZE(es7134_dapm_widgets), .dapm_routes = es7134_dapm_routes, -- cgit v1.2.3 From 563c263248ff37dcd743549a0c0932fe2bf83980 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Tue, 3 Jul 2018 17:06:00 +0200 Subject: ASoC: es7134: add support for the es7154 Add support for the es7154 which is basically an es7134 with an embedded power amplifier and lower maximum sample rate Signed-off-by: Jerome Brunet Signed-off-by: Mark Brown --- sound/soc/codecs/es7134.c | 60 ++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 59 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/es7134.c b/sound/soc/codecs/es7134.c index 80f2936cefed..6d7bca7b78ca 100644 --- a/sound/soc/codecs/es7134.c +++ b/sound/soc/codecs/es7134.c @@ -33,6 +33,7 @@ struct es7134_clock_mode { }; struct es7134_chip { + struct snd_soc_dai_driver *dai_drv; const struct es7134_clock_mode *modes; unsigned int mode_num; const struct snd_soc_dapm_widget *extra_widgets; @@ -196,6 +197,7 @@ static const struct snd_soc_dapm_route es7134_extra_routes[] = { }; static const struct es7134_chip es7134_chip = { + .dai_drv = &es7134_dai, .modes = es7134_modes, .mode_num = ARRAY_SIZE(es7134_modes), .extra_routes = es7134_extra_routes, @@ -227,6 +229,61 @@ static const struct snd_soc_component_driver es7134_component_driver = { .non_legacy_dai_naming = 1, }; +static struct snd_soc_dai_driver es7154_dai = { + .name = "es7154-hifi", + .playback = { + .stream_name = "Playback", + .channels_min = 2, + .channels_max = 2, + .rates = (SNDRV_PCM_RATE_8000_48000 | + SNDRV_PCM_RATE_88200 | + SNDRV_PCM_RATE_96000), + .formats = (SNDRV_PCM_FMTBIT_S16_LE | + SNDRV_PCM_FMTBIT_S18_3LE | + SNDRV_PCM_FMTBIT_S20_3LE | + SNDRV_PCM_FMTBIT_S24_3LE | + SNDRV_PCM_FMTBIT_S24_LE), + }, + .ops = &es7134_dai_ops, +}; + +static const struct es7134_clock_mode es7154_modes[] = { + { + /* Single speed mode */ + .rate_min = 8000, + .rate_max = 50000, + .mclk_fs = (unsigned int[]) { 32, 64, 128, 192, 256, + 384, 512, 768, 1024 }, + .mclk_fs_num = 9, + }, { + /* Double speed mode */ + .rate_min = 84000, + .rate_max = 100000, + .mclk_fs = (unsigned int[]) { 128, 192, 256, 384, 512, + 768, 1024}, + .mclk_fs_num = 7, + } +}; + +/* Es7154 has a separate supply for digital I/O */ +static const struct snd_soc_dapm_widget es7154_extra_widgets[] = { + SND_SOC_DAPM_REGULATOR_SUPPLY("PVDD", 0, 0), +}; + +static const struct snd_soc_dapm_route es7154_extra_routes[] = { + { "Playback", NULL, "PVDD", } +}; + +static const struct es7134_chip es7154_chip = { + .dai_drv = &es7154_dai, + .modes = es7154_modes, + .mode_num = ARRAY_SIZE(es7154_modes), + .extra_routes = es7154_extra_routes, + .extra_route_num = ARRAY_SIZE(es7154_extra_routes), + .extra_widgets = es7154_extra_widgets, + .extra_widget_num = ARRAY_SIZE(es7154_extra_widgets), +}; + static int es7134_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -245,13 +302,14 @@ static int es7134_probe(struct platform_device *pdev) return devm_snd_soc_register_component(&pdev->dev, &es7134_component_driver, - &es7134_dai, 1); + priv->chip->dai_drv, 1); } #ifdef CONFIG_OF static const struct of_device_id es7134_ids[] = { { .compatible = "everest,es7134", .data = &es7134_chip }, { .compatible = "everest,es7144", .data = &es7134_chip }, + { .compatible = "everest,es7154", .data = &es7154_chip }, { } }; MODULE_DEVICE_TABLE(of, es7134_ids); -- cgit v1.2.3 From 73ad0df572901e03fc703b6f114e4442291f45c2 Mon Sep 17 00:00:00 2001 From: Codrin Ciubotariu Date: Tue, 3 Jul 2018 17:56:30 +0300 Subject: ASoC: atmel-i2s: Remove unnecessary audio PLL clock (aclk) The generated clock (gclk) driver is able to set aclk as its parent and change its rate alone, if needed. This means that our driver no longer needs to configure aclk and we can let gclk select and configure its clock source. Signed-off-by: Codrin Ciubotariu Signed-off-by: Mark Brown --- sound/soc/atmel/atmel-i2s.c | 46 +++++++-------------------------------------- 1 file changed, 7 insertions(+), 39 deletions(-) diff --git a/sound/soc/atmel/atmel-i2s.c b/sound/soc/atmel/atmel-i2s.c index 5d3b5af9fd92..d88c1d995036 100644 --- a/sound/soc/atmel/atmel-i2s.c +++ b/sound/soc/atmel/atmel-i2s.c @@ -206,7 +206,6 @@ struct atmel_i2s_dev { struct regmap *regmap; struct clk *pclk; struct clk *gclk; - struct clk *aclk; struct snd_dmaengine_dai_dma_data playback; struct snd_dmaengine_dai_dma_data capture; unsigned int fmt; @@ -303,7 +302,7 @@ static int atmel_i2s_get_gck_param(struct atmel_i2s_dev *dev, int fs) { int i, best; - if (!dev->gclk || !dev->aclk) { + if (!dev->gclk) { dev_err(dev->dev, "cannot generate the I2S Master Clock\n"); return -EINVAL; } @@ -421,7 +420,7 @@ static int atmel_i2s_switch_mck_generator(struct atmel_i2s_dev *dev, bool enabled) { unsigned int mr, mr_mask; - unsigned long aclk_rate; + unsigned long gclk_rate; int ret; mr = 0; @@ -445,35 +444,18 @@ static int atmel_i2s_switch_mck_generator(struct atmel_i2s_dev *dev, /* Disable/unprepare the PMC generated clock. */ clk_disable_unprepare(dev->gclk); - /* Disable/unprepare the PLL audio clock. */ - clk_disable_unprepare(dev->aclk); return 0; } if (!dev->gck_param) return -EINVAL; - aclk_rate = dev->gck_param->mck * (dev->gck_param->imckdiv + 1); + gclk_rate = dev->gck_param->mck * (dev->gck_param->imckdiv + 1); - /* Fist change the PLL audio clock frequency ... */ - ret = clk_set_rate(dev->aclk, aclk_rate); + ret = clk_set_rate(dev->gclk, gclk_rate); if (ret) return ret; - /* - * ... then set the PMC generated clock rate to the very same frequency - * to set the gclk parent to aclk. - */ - ret = clk_set_rate(dev->gclk, aclk_rate); - if (ret) - return ret; - - /* Prepare and enable the PLL audio clock first ... */ - ret = clk_prepare_enable(dev->aclk); - if (ret) - return ret; - - /* ... then prepare and enable the PMC generated clock. */ ret = clk_prepare_enable(dev->gclk); if (ret) return ret; @@ -668,28 +650,14 @@ static int atmel_i2s_probe(struct platform_device *pdev) return err; } - /* Get audio clocks to generate the I2S Master Clock (I2S_MCK) */ - dev->aclk = devm_clk_get(&pdev->dev, "aclk"); + /* Get audio clock to generate the I2S Master Clock (I2S_MCK) */ dev->gclk = devm_clk_get(&pdev->dev, "gclk"); - if (IS_ERR(dev->aclk) && IS_ERR(dev->gclk)) { - if (PTR_ERR(dev->aclk) == -EPROBE_DEFER || - PTR_ERR(dev->gclk) == -EPROBE_DEFER) + if (IS_ERR(dev->gclk)) { + if (PTR_ERR(dev->gclk) == -EPROBE_DEFER) return -EPROBE_DEFER; /* Master Mode not supported */ - dev->aclk = NULL; dev->gclk = NULL; - } else if (IS_ERR(dev->gclk)) { - err = PTR_ERR(dev->gclk); - dev_err(&pdev->dev, - "failed to get the PMC generated clock: %d\n", err); - return err; - } else if (IS_ERR(dev->aclk)) { - err = PTR_ERR(dev->aclk); - dev_err(&pdev->dev, - "failed to get the PLL audio clock: %d\n", err); - return err; } - dev->dev = &pdev->dev; dev->regmap = regmap; platform_set_drvdata(pdev, dev); -- cgit v1.2.3 From 2bd368d7bf21028f37a123041a138922254d4840 Mon Sep 17 00:00:00 2001 From: Codrin Ciubotariu Date: Tue, 3 Jul 2018 17:56:31 +0300 Subject: ASoC: atmel-i2s: dt-bindings: Remove unnecessary phandle to aclk The optional clock phandle to aclk (Audio PLL clock) is no longer needed by the driver. Signed-off-by: Codrin Ciubotariu Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/atmel-i2s.txt | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/atmel-i2s.txt b/Documentation/devicetree/bindings/sound/atmel-i2s.txt index 735368b8a73f..40549f496a81 100644 --- a/Documentation/devicetree/bindings/sound/atmel-i2s.txt +++ b/Documentation/devicetree/bindings/sound/atmel-i2s.txt @@ -15,7 +15,6 @@ Required properties: - clock-names: Should be one of each entry matching the clocks phandles list: - "pclk" (peripheral clock) Required. - "gclk" (generated clock) Optional (1). - - "aclk" (Audio PLL clock) Optional (1). - "muxclk" (I2S mux clock) Optional (1). Optional properties: @@ -23,9 +22,9 @@ Optional properties: - princtrl-names: Should contain only one value - "default". -(1) : Only the peripheral clock is required. The generated clock, the Audio - PLL clock adn the I2S mux clock are optional and should only be set - together, when Master Mode is required. +(1) : Only the peripheral clock is required. The generated clock and the I2S + mux clock are optional and should only be set together, when Master Mode + is required. Example: @@ -40,8 +39,8 @@ Example: (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(32))>; dma-names = "tx", "rx"; - clocks = <&i2s0_clk>, <&i2s0_gclk>, <&audio_pll_pmc>, <&i2s0muxck>; - clock-names = "pclk", "gclk", "aclk", "muxclk"; + clocks = <&i2s0_clk>, <&i2s0_gclk>, <&i2s0muxck>; + clock-names = "pclk", "gclk", "muxclk"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2s0_default>; }; -- cgit v1.2.3 From a655de808cbde6c58b3298e704d786b53f59fb5d Mon Sep 17 00:00:00 2001 From: Liam Girdwood Date: Mon, 2 Jul 2018 16:59:54 +0100 Subject: ASoC: core: Allow topology to override machine driver FE DAI link config. Machine drivers statically define a number of DAI links that currently cannot be changed or removed by topology. This means PCMs and platform components cannot be changed by topology at runtime AND machine drivers are tightly coupled to topology. This patch allows topology to override the machine driver DAI link config in order to reuse machine drivers with different topologies and platform components. The patch supports :- 1) create new FE PCMs with a topology defined PCM ID. 2) destroy existing static FE PCMs 3) change the platform component driver. 4) assign any new HW params fixups. 5) assign a new card name prefix to differentiate this topology to userspace. The patch requires no changes to the machine drivers, but does add some platform component flags that the platform component driver can assign before loading topologies. Signed-off-by: Liam Girdwood Signed-off-by: Mark Brown --- include/sound/soc.h | 13 +++++++ sound/soc/soc-core.c | 101 +++++++++++++++++++++++++++++++++++++++++++++++++-- sound/soc/soc-pcm.c | 12 ++++++ 3 files changed, 123 insertions(+), 3 deletions(-) diff --git a/include/sound/soc.h b/include/sound/soc.h index 16f0bf10cc42..870ba6b64817 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -803,6 +803,14 @@ struct snd_soc_component_driver { unsigned int use_pmdown_time:1; /* care pmdown_time at stop */ unsigned int endianness:1; unsigned int non_legacy_dai_naming:1; + + /* this component uses topology and ignore machine driver FEs */ + const char *ignore_machine; + const char *topology_name_prefix; + int (*be_hw_params_fixup)(struct snd_soc_pcm_runtime *rtd, + struct snd_pcm_hw_params *params); + bool use_dai_pcm_id; /* use the DAI link PCM ID as PCM device number */ + int be_pcm_base; /* base device ID for all BE PCMs */ }; struct snd_soc_component { @@ -960,6 +968,9 @@ struct snd_soc_dai_link { /* pmdown_time is ignored at stop */ unsigned int ignore_pmdown_time:1; + /* Do not create a PCM for this DAI link (Backend link) */ + unsigned int ignore:1; + struct list_head list; /* DAI link list of the soc card */ struct snd_soc_dobj dobj; /* For topology */ }; @@ -999,6 +1010,7 @@ struct snd_soc_card { const char *long_name; const char *driver_name; char dmi_longname[80]; + char topology_shortname[32]; struct device *dev; struct snd_card *snd_card; @@ -1008,6 +1020,7 @@ struct snd_soc_card { struct mutex dapm_mutex; bool instantiated; + bool topology_shortname_created; int (*probe)(struct snd_soc_card *card); int (*late_probe)(struct snd_soc_card *card); diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 68b08781c832..00bd58d167dd 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -847,6 +847,9 @@ static int soc_bind_dai_link(struct snd_soc_card *card, const char *platform_name; int i; + if (dai_link->ignore) + return 0; + dev_dbg(card->dev, "ASoC: binding %s\n", dai_link->name); if (soc_is_dai_link_bound(card, dai_link)) { @@ -1456,7 +1459,9 @@ static int soc_probe_link_dais(struct snd_soc_card *card, { struct snd_soc_dai_link *dai_link = rtd->dai_link; struct snd_soc_dai *cpu_dai = rtd->cpu_dai; - int i, ret; + struct snd_soc_rtdcom_list *rtdcom; + struct snd_soc_component *component; + int i, ret, num; dev_dbg(card->dev, "ASoC: probe %s dai link %d late %d\n", card->name, rtd->num, order); @@ -1502,9 +1507,28 @@ static int soc_probe_link_dais(struct snd_soc_card *card, soc_dpcm_debugfs_add(rtd); #endif + num = rtd->num; + + /* + * most drivers will register their PCMs using DAI link ordering but + * topology based drivers can use the DAI link id field to set PCM + * device number and then use rtd + a base offset of the BEs. + */ + for_each_rtdcom(rtd, rtdcom) { + component = rtdcom->component; + + if (!component->driver->use_dai_pcm_id) + continue; + + if (rtd->dai_link->no_pcm) + num += component->driver->be_pcm_base; + else + num = rtd->dai_link->id; + } + if (cpu_dai->driver->compress_new) { /*create compress_device"*/ - ret = cpu_dai->driver->compress_new(rtd, rtd->num); + ret = cpu_dai->driver->compress_new(rtd, num); if (ret < 0) { dev_err(card->dev, "ASoC: can't create compress %s\n", dai_link->stream_name); @@ -1514,7 +1538,7 @@ static int soc_probe_link_dais(struct snd_soc_card *card, if (!dai_link->params) { /* create the pcm */ - ret = soc_new_pcm(rtd, rtd->num); + ret = soc_new_pcm(rtd, num); if (ret < 0) { dev_err(card->dev, "ASoC: can't create pcm %s :%d\n", dai_link->stream_name, ret); @@ -1841,6 +1865,74 @@ int snd_soc_set_dmi_name(struct snd_soc_card *card, const char *flavour) EXPORT_SYMBOL_GPL(snd_soc_set_dmi_name); #endif /* CONFIG_DMI */ +static void soc_check_tplg_fes(struct snd_soc_card *card) +{ + struct snd_soc_component *component; + const struct snd_soc_component_driver *comp_drv; + struct snd_soc_dai_link *dai_link; + int i; + + list_for_each_entry(component, &component_list, list) { + + /* does this component override FEs ? */ + if (!component->driver->ignore_machine) + continue; + + /* for this machine ? */ + if (strcmp(component->driver->ignore_machine, + card->dev->driver->name)) + continue; + + /* machine matches, so override the rtd data */ + for (i = 0; i < card->num_links; i++) { + + dai_link = &card->dai_link[i]; + + /* ignore this FE */ + if (dai_link->dynamic) { + dai_link->ignore = true; + continue; + } + + dev_info(card->dev, "info: override FE DAI link %s\n", + card->dai_link[i].name); + + /* override platform component */ + dai_link->platform_name = component->name; + + /* convert non BE into BE */ + dai_link->no_pcm = 1; + + /* override any BE fixups */ + dai_link->be_hw_params_fixup = + component->driver->be_hw_params_fixup; + + /* most BE links don't set stream name, so set it to + * dai link name if it's NULL to help bind widgets. + */ + if (!dai_link->stream_name) + dai_link->stream_name = dai_link->name; + } + + /* Inform userspace we are using alternate topology */ + if (component->driver->topology_name_prefix) { + + /* topology shortname created ? */ + if (!card->topology_shortname_created) { + comp_drv = component->driver; + + snprintf(card->topology_shortname, 32, "%s-%s", + comp_drv->topology_name_prefix, + card->name); + card->topology_shortname_created = true; + } + + /* use topology shortname */ + card->name = card->topology_shortname; + } + } +} + static int snd_soc_instantiate_card(struct snd_soc_card *card) { struct snd_soc_pcm_runtime *rtd; @@ -1850,6 +1942,9 @@ static int snd_soc_instantiate_card(struct snd_soc_card *card) mutex_lock(&client_mutex); mutex_lock_nested(&card->mutex, SND_SOC_CARD_CLASS_INIT); + /* check whether any platform is ignore machine FE and using topology */ + soc_check_tplg_fes(card); + /* bind DAIs */ for (i = 0; i < card->num_links; i++) { ret = soc_bind_dai_link(card, &card->dai_link[i]); diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c index c2a31b51da4f..b7e67b871c0c 100644 --- a/sound/soc/soc-pcm.c +++ b/sound/soc/soc-pcm.c @@ -859,8 +859,20 @@ int soc_dai_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) { + struct snd_soc_pcm_runtime *rtd = substream->private_data; int ret; + /* perform any topology hw_params fixups before DAI */ + if (rtd->dai_link->be_hw_params_fixup) { + ret = rtd->dai_link->be_hw_params_fixup(rtd, params); + if (ret < 0) { + dev_err(rtd->dev, + "ASoC: hw_params topology fixup failed %d\n", + ret); + return ret; + } + } + if (dai->driver->ops->hw_params) { ret = dai->driver->ops->hw_params(substream, params, dai); if (ret < 0) { -- cgit v1.2.3 From ed2b82c03dc187018307c7c6bf9299705f3db383 Mon Sep 17 00:00:00 2001 From: Mauricio Vasquez B Date: Fri, 29 Jun 2018 14:48:20 +0200 Subject: bpf: hash map: decrement counter on error Decrement the number of elements in the map in case the allocation of a new node fails. Fixes: 6c9059817432 ("bpf: pre-allocate hash map elements") Signed-off-by: Mauricio Vasquez B Acked-by: Alexei Starovoitov Signed-off-by: Daniel Borkmann --- kernel/bpf/hashtab.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/kernel/bpf/hashtab.c b/kernel/bpf/hashtab.c index 3ca2198a6d22..513d9dfcf4ee 100644 --- a/kernel/bpf/hashtab.c +++ b/kernel/bpf/hashtab.c @@ -747,13 +747,15 @@ static struct htab_elem *alloc_htab_elem(struct bpf_htab *htab, void *key, * old element will be freed immediately. * Otherwise return an error */ - atomic_dec(&htab->count); - return ERR_PTR(-E2BIG); + l_new = ERR_PTR(-E2BIG); + goto dec_count; } l_new = kmalloc_node(htab->elem_size, GFP_ATOMIC | __GFP_NOWARN, htab->map.numa_node); - if (!l_new) - return ERR_PTR(-ENOMEM); + if (!l_new) { + l_new = ERR_PTR(-ENOMEM); + goto dec_count; + } } memcpy(l_new->key, key, key_size); @@ -766,7 +768,8 @@ static struct htab_elem *alloc_htab_elem(struct bpf_htab *htab, void *key, GFP_ATOMIC | __GFP_NOWARN); if (!pptr) { kfree(l_new); - return ERR_PTR(-ENOMEM); + l_new = ERR_PTR(-ENOMEM); + goto dec_count; } } @@ -780,6 +783,9 @@ static struct htab_elem *alloc_htab_elem(struct bpf_htab *htab, void *key, l_new->hash = hash; return l_new; +dec_count: + atomic_dec(&htab->count); + return l_new; } static int check_flags(struct bpf_htab *htab, struct htab_elem *l_old, -- cgit v1.2.3 From 077772468ec141b22e1e7c0c58bc09e2f9dc8762 Mon Sep 17 00:00:00 2001 From: Wang Dongsheng Date: Sun, 1 Jul 2018 23:15:46 -0700 Subject: net: phy: marvell: change default m88e1510 LED configuration The m88e1121 LED default configuration does not apply m88e151x. So add a function to relpace m88e1121 LED configuration. Signed-off-by: Wang Dongsheng Signed-off-by: David S. Miller --- drivers/net/phy/marvell.c | 54 ++++++++++++++++++++++++++++++--------------- include/linux/marvell_phy.h | 2 ++ 2 files changed, 38 insertions(+), 18 deletions(-) diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index b8f57e9b9379..1cd439bdf608 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -130,8 +130,9 @@ #define MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS BIT(12) #define MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE BIT(14) -#define MII_88E1121_PHY_LED_CTRL 16 +#define MII_PHY_LED_CTRL 16 #define MII_88E1121_PHY_LED_DEF 0x0030 +#define MII_88E1510_PHY_LED_DEF 0x1177 #define MII_M1011_PHY_STATUS 0x11 #define MII_M1011_PHY_STATUS_1000 0x8000 @@ -632,8 +633,40 @@ error: return err; } +static void marvell_config_led(struct phy_device *phydev) +{ + u16 def_config; + int err; + + switch (MARVELL_PHY_FAMILY_ID(phydev->phy_id)) { + /* Default PHY LED config: LED[0] .. Link, LED[1] .. Activity */ + case MARVELL_PHY_FAMILY_ID(MARVELL_PHY_ID_88E1121R): + case MARVELL_PHY_FAMILY_ID(MARVELL_PHY_ID_88E1318S): + def_config = MII_88E1121_PHY_LED_DEF; + break; + /* Default PHY LED config: + * LED[0] .. 1000Mbps Link + * LED[1] .. 100Mbps Link + * LED[2] .. Blink, Activity + */ + case MARVELL_PHY_FAMILY_ID(MARVELL_PHY_ID_88E1510): + def_config = MII_88E1510_PHY_LED_DEF; + break; + default: + return; + } + + err = phy_write_paged(phydev, MII_MARVELL_LED_PAGE, MII_PHY_LED_CTRL, + def_config); + if (err < 0) + pr_warn("Fail to config marvell phy LED.\n"); +} + static int marvell_config_init(struct phy_device *phydev) { + /* Set defalut LED */ + marvell_config_led(phydev); + /* Set registers from marvell,reg-init DT property */ return marvell_of_reg_init(phydev); } @@ -813,21 +846,6 @@ static int m88e1111_config_init(struct phy_device *phydev) return genphy_soft_reset(phydev); } -static int m88e1121_config_init(struct phy_device *phydev) -{ - int err; - - /* Default PHY LED config: LED[0] .. Link, LED[1] .. Activity */ - err = phy_write_paged(phydev, MII_MARVELL_LED_PAGE, - MII_88E1121_PHY_LED_CTRL, - MII_88E1121_PHY_LED_DEF); - if (err < 0) - return err; - - /* Set marvell,reg-init configuration from device tree */ - return marvell_config_init(phydev); -} - static int m88e1318_config_init(struct phy_device *phydev) { if (phy_interrupt_is_valid(phydev)) { @@ -841,7 +859,7 @@ static int m88e1318_config_init(struct phy_device *phydev) return err; } - return m88e1121_config_init(phydev); + return marvell_config_init(phydev); } static int m88e1510_config_init(struct phy_device *phydev) @@ -2087,7 +2105,7 @@ static struct phy_driver marvell_drivers[] = { .features = PHY_GBIT_FEATURES, .flags = PHY_HAS_INTERRUPT, .probe = &m88e1121_probe, - .config_init = &m88e1121_config_init, + .config_init = &marvell_config_init, .config_aneg = &m88e1121_config_aneg, .read_status = &marvell_read_status, .ack_interrupt = &marvell_ack_interrupt, diff --git a/include/linux/marvell_phy.h b/include/linux/marvell_phy.h index 4f5f8c21e283..1eb6f244588d 100644 --- a/include/linux/marvell_phy.h +++ b/include/linux/marvell_phy.h @@ -27,6 +27,8 @@ */ #define MARVELL_PHY_ID_88E6390 0x01410f90 +#define MARVELL_PHY_FAMILY_ID(id) ((id) >> 4) + /* struct phy_device dev_flags definitions */ #define MARVELL_PHY_M1145_FLAGS_RESISTANCE 0x00000001 #define MARVELL_PHY_M1118_DNS323_LEDS 0x00000002 -- cgit v1.2.3 From d5a672ac9f48f81b20b1cad1d9ed7bbf4e418d4c Mon Sep 17 00:00:00 2001 From: Toke Høiland-Jørgensen Date: Mon, 2 Jul 2018 22:52:20 +0200 Subject: gen_stats: Fix netlink stats dumping in the presence of padding MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The gen_stats facility will add a header for the toplevel nlattr of type TCA_STATS2 that contains all stats added by qdisc callbacks. A reference to this header is stored in the gnet_dump struct, and when all the per-qdisc callbacks have finished adding their stats, the length of the containing header will be adjusted to the right value. However, on architectures that need padding (i.e., that don't set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS), the padding nlattr is added before the stats, which means that the stored pointer will point to the padding, and so when the header is fixed up, the result is just a very big padding nlattr. Because most qdiscs also supply the legacy TCA_STATS struct, this problem has been mostly invisible, but we exposed it with the netlink attribute-based statistics in CAKE. Fix the issue by fixing up the stored pointer if it points to a padding nlattr. Tested-by: Pete Heist Tested-by: Kevin Darbyshire-Bryant Signed-off-by: Toke Høiland-Jørgensen Signed-off-by: David S. Miller --- net/core/gen_stats.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/net/core/gen_stats.c b/net/core/gen_stats.c index b2b2323bdc84..188d693cb251 100644 --- a/net/core/gen_stats.c +++ b/net/core/gen_stats.c @@ -77,8 +77,20 @@ gnet_stats_start_copy_compat(struct sk_buff *skb, int type, int tc_stats_type, d->lock = lock; spin_lock_bh(lock); } - if (d->tail) - return gnet_stats_copy(d, type, NULL, 0, padattr); + if (d->tail) { + int ret = gnet_stats_copy(d, type, NULL, 0, padattr); + + /* The initial attribute added in gnet_stats_copy() may be + * preceded by a padding attribute, in which case d->tail will + * end up pointing at the padding instead of the real attribute. + * Fix this so gnet_stats_finish_copy() adjusts the length of + * the right attribute. + */ + if (ret == 0 && d->tail->nla_type == padattr) + d->tail = (struct nlattr *)((char *)d->tail + + NLA_ALIGN(d->tail->nla_len)); + return ret; + } return 0; } -- cgit v1.2.3 From 33bd5ac54dc47e002da4a395aaf9bf158dd17709 Mon Sep 17 00:00:00 2001 From: David Ahern Date: Tue, 3 Jul 2018 14:36:21 -0700 Subject: net/ipv6: Revert attempt to simplify route replace and append NetworkManager likes to manage linklocal prefix routes and does so with the NLM_F_APPEND flag, breaking attempts to simplify the IPv6 route code and by extension enable multipath routes with device only nexthops. Revert f34436a43092 and these followup patches: 6eba08c3626b ("ipv6: Only emit append events for appended routes"). ce45bded6435 ("mlxsw: spectrum_router: Align with new route replace logic") 53b562df8c20 ("mlxsw: spectrum_router: Allow appending to dev-only routes") Update the fib_tests cases to reflect the old behavior. Fixes: f34436a43092 ("net/ipv6: Simplify route replace and appending into multipath route") Signed-off-by: David Ahern --- .../net/ethernet/mellanox/mlxsw/spectrum_router.c | 48 +++---- include/net/ip6_route.h | 6 + net/ipv6/ip6_fib.c | 156 ++++++++++++--------- net/ipv6/route.c | 3 +- tools/testing/selftests/net/fib_tests.sh | 41 ------ 5 files changed, 117 insertions(+), 137 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c index 6aaaf3d9ba31..77b2adb29341 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c @@ -4756,6 +4756,12 @@ static void mlxsw_sp_rt6_destroy(struct mlxsw_sp_rt6 *mlxsw_sp_rt6) kfree(mlxsw_sp_rt6); } +static bool mlxsw_sp_fib6_rt_can_mp(const struct fib6_info *rt) +{ + /* RTF_CACHE routes are ignored */ + return (rt->fib6_flags & (RTF_GATEWAY | RTF_ADDRCONF)) == RTF_GATEWAY; +} + static struct fib6_info * mlxsw_sp_fib6_entry_rt(const struct mlxsw_sp_fib6_entry *fib6_entry) { @@ -4765,11 +4771,11 @@ mlxsw_sp_fib6_entry_rt(const struct mlxsw_sp_fib6_entry *fib6_entry) static struct mlxsw_sp_fib6_entry * mlxsw_sp_fib6_node_mp_entry_find(const struct mlxsw_sp_fib_node *fib_node, - const struct fib6_info *nrt, bool append) + const struct fib6_info *nrt, bool replace) { struct mlxsw_sp_fib6_entry *fib6_entry; - if (!append) + if (!mlxsw_sp_fib6_rt_can_mp(nrt) || replace) return NULL; list_for_each_entry(fib6_entry, &fib_node->entry_list, common.list) { @@ -4784,7 +4790,8 @@ mlxsw_sp_fib6_node_mp_entry_find(const struct mlxsw_sp_fib_node *fib_node, break; if (rt->fib6_metric < nrt->fib6_metric) continue; - if (rt->fib6_metric == nrt->fib6_metric) + if (rt->fib6_metric == nrt->fib6_metric && + mlxsw_sp_fib6_rt_can_mp(rt)) return fib6_entry; if (rt->fib6_metric > nrt->fib6_metric) break; @@ -5163,7 +5170,7 @@ static struct mlxsw_sp_fib6_entry * mlxsw_sp_fib6_node_entry_find(const struct mlxsw_sp_fib_node *fib_node, const struct fib6_info *nrt, bool replace) { - struct mlxsw_sp_fib6_entry *fib6_entry; + struct mlxsw_sp_fib6_entry *fib6_entry, *fallback = NULL; list_for_each_entry(fib6_entry, &fib_node->entry_list, common.list) { struct fib6_info *rt = mlxsw_sp_fib6_entry_rt(fib6_entry); @@ -5172,13 +5179,18 @@ mlxsw_sp_fib6_node_entry_find(const struct mlxsw_sp_fib_node *fib_node, continue; if (rt->fib6_table->tb6_id != nrt->fib6_table->tb6_id) break; - if (replace && rt->fib6_metric == nrt->fib6_metric) - return fib6_entry; + if (replace && rt->fib6_metric == nrt->fib6_metric) { + if (mlxsw_sp_fib6_rt_can_mp(rt) == + mlxsw_sp_fib6_rt_can_mp(nrt)) + return fib6_entry; + if (mlxsw_sp_fib6_rt_can_mp(nrt)) + fallback = fallback ?: fib6_entry; + } if (rt->fib6_metric > nrt->fib6_metric) - return fib6_entry; + return fallback ?: fib6_entry; } - return NULL; + return fallback; } static int @@ -5304,8 +5316,7 @@ static void mlxsw_sp_fib6_entry_replace(struct mlxsw_sp *mlxsw_sp, } static int mlxsw_sp_router_fib6_add(struct mlxsw_sp *mlxsw_sp, - struct fib6_info *rt, bool replace, - bool append) + struct fib6_info *rt, bool replace) { struct mlxsw_sp_fib6_entry *fib6_entry; struct mlxsw_sp_fib_node *fib_node; @@ -5331,7 +5342,7 @@ static int mlxsw_sp_router_fib6_add(struct mlxsw_sp *mlxsw_sp, /* Before creating a new entry, try to append route to an existing * multipath entry. */ - fib6_entry = mlxsw_sp_fib6_node_mp_entry_find(fib_node, rt, append); + fib6_entry = mlxsw_sp_fib6_node_mp_entry_find(fib_node, rt, replace); if (fib6_entry) { err = mlxsw_sp_fib6_entry_nexthop_add(mlxsw_sp, fib6_entry, rt); if (err) @@ -5339,14 +5350,6 @@ static int mlxsw_sp_router_fib6_add(struct mlxsw_sp *mlxsw_sp, return 0; } - /* We received an append event, yet did not find any route to - * append to. - */ - if (WARN_ON(append)) { - err = -EINVAL; - goto err_fib6_entry_append; - } - fib6_entry = mlxsw_sp_fib6_entry_create(mlxsw_sp, fib_node, rt); if (IS_ERR(fib6_entry)) { err = PTR_ERR(fib6_entry); @@ -5364,7 +5367,6 @@ static int mlxsw_sp_router_fib6_add(struct mlxsw_sp *mlxsw_sp, err_fib6_node_entry_link: mlxsw_sp_fib6_entry_destroy(mlxsw_sp, fib6_entry); err_fib6_entry_create: -err_fib6_entry_append: err_fib6_entry_nexthop_add: mlxsw_sp_fib_node_put(mlxsw_sp, fib_node); return err; @@ -5715,7 +5717,7 @@ static void mlxsw_sp_router_fib6_event_work(struct work_struct *work) struct mlxsw_sp_fib_event_work *fib_work = container_of(work, struct mlxsw_sp_fib_event_work, work); struct mlxsw_sp *mlxsw_sp = fib_work->mlxsw_sp; - bool replace, append; + bool replace; int err; rtnl_lock(); @@ -5726,10 +5728,8 @@ static void mlxsw_sp_router_fib6_event_work(struct work_struct *work) case FIB_EVENT_ENTRY_APPEND: /* fall through */ case FIB_EVENT_ENTRY_ADD: replace = fib_work->event == FIB_EVENT_ENTRY_REPLACE; - append = fib_work->event == FIB_EVENT_ENTRY_APPEND; err = mlxsw_sp_router_fib6_add(mlxsw_sp, - fib_work->fen6_info.rt, replace, - append); + fib_work->fen6_info.rt, replace); if (err) mlxsw_sp_router_fib_abort(mlxsw_sp); mlxsw_sp_rt6_release(fib_work->fen6_info.rt); diff --git a/include/net/ip6_route.h b/include/net/ip6_route.h index 59656fc580df..7b9c82de11cc 100644 --- a/include/net/ip6_route.h +++ b/include/net/ip6_route.h @@ -66,6 +66,12 @@ static inline bool rt6_need_strict(const struct in6_addr *daddr) (IPV6_ADDR_MULTICAST | IPV6_ADDR_LINKLOCAL | IPV6_ADDR_LOOPBACK); } +static inline bool rt6_qualify_for_ecmp(const struct fib6_info *f6i) +{ + return (f6i->fib6_flags & (RTF_GATEWAY|RTF_ADDRCONF|RTF_DYNAMIC)) == + RTF_GATEWAY; +} + void ip6_route_input(struct sk_buff *skb); struct dst_entry *ip6_route_input_lookup(struct net *net, struct net_device *dev, diff --git a/net/ipv6/ip6_fib.c b/net/ipv6/ip6_fib.c index 1fb2f3118d60..d212738e9d10 100644 --- a/net/ipv6/ip6_fib.c +++ b/net/ipv6/ip6_fib.c @@ -935,20 +935,19 @@ static int fib6_add_rt2node(struct fib6_node *fn, struct fib6_info *rt, { struct fib6_info *leaf = rcu_dereference_protected(fn->leaf, lockdep_is_held(&rt->fib6_table->tb6_lock)); - enum fib_event_type event = FIB_EVENT_ENTRY_ADD; - struct fib6_info *iter = NULL, *match = NULL; + struct fib6_info *iter = NULL; struct fib6_info __rcu **ins; + struct fib6_info __rcu **fallback_ins = NULL; int replace = (info->nlh && (info->nlh->nlmsg_flags & NLM_F_REPLACE)); - int append = (info->nlh && - (info->nlh->nlmsg_flags & NLM_F_APPEND)); int add = (!info->nlh || (info->nlh->nlmsg_flags & NLM_F_CREATE)); int found = 0; + bool rt_can_ecmp = rt6_qualify_for_ecmp(rt); u16 nlflags = NLM_F_EXCL; int err; - if (append) + if (info->nlh && (info->nlh->nlmsg_flags & NLM_F_APPEND)) nlflags |= NLM_F_APPEND; ins = &fn->leaf; @@ -970,8 +969,13 @@ static int fib6_add_rt2node(struct fib6_node *fn, struct fib6_info *rt, nlflags &= ~NLM_F_EXCL; if (replace) { - found++; - break; + if (rt_can_ecmp == rt6_qualify_for_ecmp(iter)) { + found++; + break; + } + if (rt_can_ecmp) + fallback_ins = fallback_ins ?: ins; + goto next_iter; } if (rt6_duplicate_nexthop(iter, rt)) { @@ -986,51 +990,71 @@ static int fib6_add_rt2node(struct fib6_node *fn, struct fib6_info *rt, fib6_metric_set(iter, RTAX_MTU, rt->fib6_pmtu); return -EEXIST; } - - /* first route that matches */ - if (!match) - match = iter; + /* If we have the same destination and the same metric, + * but not the same gateway, then the route we try to + * add is sibling to this route, increment our counter + * of siblings, and later we will add our route to the + * list. + * Only static routes (which don't have flag + * RTF_EXPIRES) are used for ECMPv6. + * + * To avoid long list, we only had siblings if the + * route have a gateway. + */ + if (rt_can_ecmp && + rt6_qualify_for_ecmp(iter)) + rt->fib6_nsiblings++; } if (iter->fib6_metric > rt->fib6_metric) break; +next_iter: ins = &iter->fib6_next; } + if (fallback_ins && !found) { + /* No ECMP-able route found, replace first non-ECMP one */ + ins = fallback_ins; + iter = rcu_dereference_protected(*ins, + lockdep_is_held(&rt->fib6_table->tb6_lock)); + found++; + } + /* Reset round-robin state, if necessary */ if (ins == &fn->leaf) fn->rr_ptr = NULL; /* Link this route to others same route. */ - if (append && match) { + if (rt->fib6_nsiblings) { + unsigned int fib6_nsiblings; struct fib6_info *sibling, *temp_sibling; - if (rt->fib6_flags & RTF_REJECT) { - NL_SET_ERR_MSG(extack, - "Can not append a REJECT route"); - return -EINVAL; - } else if (match->fib6_flags & RTF_REJECT) { - NL_SET_ERR_MSG(extack, - "Can not append to a REJECT route"); - return -EINVAL; + /* Find the first route that have the same metric */ + sibling = leaf; + while (sibling) { + if (sibling->fib6_metric == rt->fib6_metric && + rt6_qualify_for_ecmp(sibling)) { + list_add_tail(&rt->fib6_siblings, + &sibling->fib6_siblings); + break; + } + sibling = rcu_dereference_protected(sibling->fib6_next, + lockdep_is_held(&rt->fib6_table->tb6_lock)); } - event = FIB_EVENT_ENTRY_APPEND; - rt->fib6_nsiblings = match->fib6_nsiblings; - list_add_tail(&rt->fib6_siblings, &match->fib6_siblings); - match->fib6_nsiblings++; - /* For each sibling in the list, increment the counter of * siblings. BUG() if counters does not match, list of siblings * is broken! */ + fib6_nsiblings = 0; list_for_each_entry_safe(sibling, temp_sibling, - &match->fib6_siblings, fib6_siblings) { + &rt->fib6_siblings, fib6_siblings) { sibling->fib6_nsiblings++; - BUG_ON(sibling->fib6_nsiblings != match->fib6_nsiblings); + BUG_ON(sibling->fib6_nsiblings != rt->fib6_nsiblings); + fib6_nsiblings++; } - - rt6_multipath_rebalance(match); + BUG_ON(fib6_nsiblings != rt->fib6_nsiblings); + rt6_multipath_rebalance(temp_sibling); } /* @@ -1043,8 +1067,9 @@ static int fib6_add_rt2node(struct fib6_node *fn, struct fib6_info *rt, add: nlflags |= NLM_F_CREATE; - err = call_fib6_entry_notifiers(info->nl_net, event, rt, - extack); + err = call_fib6_entry_notifiers(info->nl_net, + FIB_EVENT_ENTRY_ADD, + rt, extack); if (err) return err; @@ -1062,7 +1087,7 @@ add: } } else { - struct fib6_info *tmp; + int nsiblings; if (!found) { if (add) @@ -1077,57 +1102,48 @@ add: if (err) return err; - /* if route being replaced has siblings, set tmp to - * last one, otherwise tmp is current route. this is - * used to set fib6_next for new route - */ - if (iter->fib6_nsiblings) - tmp = list_last_entry(&iter->fib6_siblings, - struct fib6_info, - fib6_siblings); - else - tmp = iter; - - /* insert new route */ atomic_inc(&rt->fib6_ref); rcu_assign_pointer(rt->fib6_node, fn); - rt->fib6_next = tmp->fib6_next; + rt->fib6_next = iter->fib6_next; rcu_assign_pointer(*ins, rt); - if (!info->skip_notify) inet6_rt_notify(RTM_NEWROUTE, rt, info, NLM_F_REPLACE); if (!(fn->fn_flags & RTN_RTINFO)) { info->nl_net->ipv6.rt6_stats->fib_route_nodes++; fn->fn_flags |= RTN_RTINFO; } + nsiblings = iter->fib6_nsiblings; + iter->fib6_node = NULL; + fib6_purge_rt(iter, fn, info->nl_net); + if (rcu_access_pointer(fn->rr_ptr) == iter) + fn->rr_ptr = NULL; + fib6_info_release(iter); - /* delete old route */ - rt = iter; - - if (rt->fib6_nsiblings) { - struct fib6_info *tmp; - + if (nsiblings) { /* Replacing an ECMP route, remove all siblings */ - list_for_each_entry_safe(iter, tmp, &rt->fib6_siblings, - fib6_siblings) { - iter->fib6_node = NULL; - fib6_purge_rt(iter, fn, info->nl_net); - if (rcu_access_pointer(fn->rr_ptr) == iter) - fn->rr_ptr = NULL; - fib6_info_release(iter); - - rt->fib6_nsiblings--; - info->nl_net->ipv6.rt6_stats->fib_rt_entries--; + ins = &rt->fib6_next; + iter = rcu_dereference_protected(*ins, + lockdep_is_held(&rt->fib6_table->tb6_lock)); + while (iter) { + if (iter->fib6_metric > rt->fib6_metric) + break; + if (rt6_qualify_for_ecmp(iter)) { + *ins = iter->fib6_next; + iter->fib6_node = NULL; + fib6_purge_rt(iter, fn, info->nl_net); + if (rcu_access_pointer(fn->rr_ptr) == iter) + fn->rr_ptr = NULL; + fib6_info_release(iter); + nsiblings--; + info->nl_net->ipv6.rt6_stats->fib_rt_entries--; + } else { + ins = &iter->fib6_next; + } + iter = rcu_dereference_protected(*ins, + lockdep_is_held(&rt->fib6_table->tb6_lock)); } + WARN_ON(nsiblings != 0); } - - WARN_ON(rt->fib6_nsiblings != 0); - - rt->fib6_node = NULL; - fib6_purge_rt(rt, fn, info->nl_net); - if (rcu_access_pointer(fn->rr_ptr) == rt) - fn->rr_ptr = NULL; - fib6_info_release(rt); } return 0; diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 86a0e4333d42..63f99411f0de 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -3842,7 +3842,7 @@ static struct fib6_info *rt6_multipath_first_sibling(const struct fib6_info *rt) lockdep_is_held(&rt->fib6_table->tb6_lock)); while (iter) { if (iter->fib6_metric == rt->fib6_metric && - iter->fib6_nsiblings) + rt6_qualify_for_ecmp(iter)) return iter; iter = rcu_dereference_protected(iter->fib6_next, lockdep_is_held(&rt->fib6_table->tb6_lock)); @@ -4439,7 +4439,6 @@ static int ip6_route_multipath_add(struct fib6_config *cfg, */ cfg->fc_nlinfo.nlh->nlmsg_flags &= ~(NLM_F_EXCL | NLM_F_REPLACE); - cfg->fc_nlinfo.nlh->nlmsg_flags |= NLM_F_APPEND; nhn++; } diff --git a/tools/testing/selftests/net/fib_tests.sh b/tools/testing/selftests/net/fib_tests.sh index 78245d60d8bc..0f45633bd634 100755 --- a/tools/testing/selftests/net/fib_tests.sh +++ b/tools/testing/selftests/net/fib_tests.sh @@ -740,13 +740,6 @@ ipv6_rt_add() run_cmd "$IP -6 ro add unreachable 2001:db8:104::/64" log_test $? 2 "Attempt to add duplicate route - reject route" - # iproute2 prepend only sets NLM_F_CREATE - # - adds a new route; does NOT convert existing route to ECMP - add_route6 "2001:db8:104::/64" "via 2001:db8:101::2" - run_cmd "$IP -6 ro prepend 2001:db8:104::/64 via 2001:db8:103::2" - check_route6 "2001:db8:104::/64 via 2001:db8:101::2 dev veth1 metric 1024 2001:db8:104::/64 via 2001:db8:103::2 dev veth3 metric 1024" - log_test $? 0 "Add new route for existing prefix (w/o NLM_F_EXCL)" - # route append with same prefix adds a new route # - iproute2 sets NLM_F_CREATE | NLM_F_APPEND add_route6 "2001:db8:104::/64" "via 2001:db8:101::2" @@ -754,27 +747,6 @@ ipv6_rt_add() check_route6 "2001:db8:104::/64 metric 1024 nexthop via 2001:db8:101::2 dev veth1 weight 1 nexthop via 2001:db8:103::2 dev veth3 weight 1" log_test $? 0 "Append nexthop to existing route - gw" - add_route6 "2001:db8:104::/64" "via 2001:db8:101::2" - run_cmd "$IP -6 ro append 2001:db8:104::/64 dev veth3" - check_route6 "2001:db8:104::/64 metric 1024 nexthop via 2001:db8:101::2 dev veth1 weight 1 nexthop dev veth3 weight 1" - log_test $? 0 "Append nexthop to existing route - dev only" - - # multipath route can not have a nexthop that is a reject route - add_route6 "2001:db8:104::/64" "via 2001:db8:101::2" - run_cmd "$IP -6 ro append unreachable 2001:db8:104::/64" - log_test $? 2 "Append nexthop to existing route - reject route" - - # reject route can not be converted to multipath route - run_cmd "$IP -6 ro flush 2001:db8:104::/64" - run_cmd "$IP -6 ro add unreachable 2001:db8:104::/64" - run_cmd "$IP -6 ro append 2001:db8:104::/64 via 2001:db8:103::2" - log_test $? 2 "Append nexthop to existing reject route - gw" - - run_cmd "$IP -6 ro flush 2001:db8:104::/64" - run_cmd "$IP -6 ro add unreachable 2001:db8:104::/64" - run_cmd "$IP -6 ro append 2001:db8:104::/64 dev veth3" - log_test $? 2 "Append nexthop to existing reject route - dev only" - # insert mpath directly add_route6 "2001:db8:104::/64" "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2" check_route6 "2001:db8:104::/64 metric 1024 nexthop via 2001:db8:101::2 dev veth1 weight 1 nexthop via 2001:db8:103::2 dev veth3 weight 1" @@ -819,13 +791,6 @@ ipv6_rt_replace_single() check_route6 "2001:db8:104::/64 metric 1024 nexthop via 2001:db8:101::3 dev veth1 weight 1 nexthop via 2001:db8:103::2 dev veth3 weight 1" log_test $? 0 "Single path with multipath" - # single path with reject - # - add_initial_route6 "nexthop via 2001:db8:101::2" - run_cmd "$IP -6 ro replace unreachable 2001:db8:104::/64" - check_route6 "unreachable 2001:db8:104::/64 dev lo metric 1024" - log_test $? 0 "Single path with reject route" - # single path with single path using MULTIPATH attribute # add_initial_route6 "via 2001:db8:101::2" @@ -873,12 +838,6 @@ ipv6_rt_replace_mpath() check_route6 "2001:db8:104::/64 via 2001:db8:101::3 dev veth1 metric 1024" log_test $? 0 "Multipath with single path via multipath attribute" - # multipath with reject - add_initial_route6 "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2" - run_cmd "$IP -6 ro replace unreachable 2001:db8:104::/64" - check_route6 "unreachable 2001:db8:104::/64 dev lo metric 1024" - log_test $? 0 "Multipath with reject route" - # route replace fails - invalid nexthop 1 add_initial_route6 "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2" run_cmd "$IP -6 ro replace 2001:db8:104::/64 nexthop via 2001:db8:111::3 nexthop via 2001:db8:103::3" -- cgit v1.2.3 From a65925475571953da12a9bc2082aec29d4e2c0e7 Mon Sep 17 00:00:00 2001 From: Xin Long Date: Tue, 3 Jul 2018 16:30:47 +0800 Subject: sctp: fix the issue that pathmtu may be set lower than MINSEGMENT After commit b6c5734db070 ("sctp: fix the handling of ICMP Frag Needed for too small MTUs"), sctp_transport_update_pmtu would refetch pathmtu from the dst and set it to transport's pathmtu without any check. The new pathmtu may be lower than MINSEGMENT if the dst is obsolete and updated by .get_dst() in sctp_transport_update_pmtu. In this case, it could have a smaller MTU as well, and thus we should validate it against MINSEGMENT instead. Syzbot reported a warning in sctp_mtu_payload caused by this. This patch refetches the pathmtu by calling sctp_dst_mtu where it does the check against MINSEGMENT. v1->v2: - refetch the pathmtu by calling sctp_dst_mtu instead as Marcelo's suggestion. Fixes: b6c5734db070 ("sctp: fix the handling of ICMP Frag Needed for too small MTUs") Reported-by: syzbot+f0d9d7cba052f9344b03@syzkaller.appspotmail.com Suggested-by: Marcelo Ricardo Leitner Signed-off-by: Xin Long Acked-by: Marcelo Ricardo Leitner Acked-by: Neil Horman Signed-off-by: David S. Miller --- net/sctp/transport.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/sctp/transport.c b/net/sctp/transport.c index 445b7ef61677..12cac85da994 100644 --- a/net/sctp/transport.c +++ b/net/sctp/transport.c @@ -282,7 +282,7 @@ bool sctp_transport_update_pmtu(struct sctp_transport *t, u32 pmtu) if (dst) { /* Re-fetch, as under layers may have a higher minimum size */ - pmtu = SCTP_TRUNC4(dst_mtu(dst)); + pmtu = sctp_dst_mtu(dst); change = t->pathmtu != pmtu; } t->pathmtu = pmtu; -- cgit v1.2.3 From d461e3da905332189aad546b2ad9adbe6071c7cc Mon Sep 17 00:00:00 2001 From: Yuiko Oshino Date: Tue, 3 Jul 2018 11:21:46 -0400 Subject: smsc75xx: Add workaround for gigabit link up hardware errata. In certain conditions, the device may not be able to link in gigabit mode. This software workaround ensures that the device will not enter the failure state. Fixes: d0cad871703b898a442e4049c532ec39168e5b57 ("SMSC75XX USB 2.0 Gigabit Ethernet Devices") Signed-off-by: Yuiko Oshino Signed-off-by: David S. Miller --- drivers/net/usb/smsc75xx.c | 62 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 62 insertions(+) diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c index 7a6a1fe79309..05553d252446 100644 --- a/drivers/net/usb/smsc75xx.c +++ b/drivers/net/usb/smsc75xx.c @@ -82,6 +82,9 @@ static bool turbo_mode = true; module_param(turbo_mode, bool, 0644); MODULE_PARM_DESC(turbo_mode, "Enable multiple frames per Rx transaction"); +static int smsc75xx_link_ok_nopm(struct usbnet *dev); +static int smsc75xx_phy_gig_workaround(struct usbnet *dev); + static int __must_check __smsc75xx_read_reg(struct usbnet *dev, u32 index, u32 *data, int in_pm) { @@ -852,6 +855,9 @@ static int smsc75xx_phy_initialize(struct usbnet *dev) return -EIO; } + /* phy workaround for gig link */ + smsc75xx_phy_gig_workaround(dev); + smsc75xx_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE, ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM); @@ -987,6 +993,62 @@ static int smsc75xx_wait_ready(struct usbnet *dev, int in_pm) return -EIO; } +static int smsc75xx_phy_gig_workaround(struct usbnet *dev) +{ + struct mii_if_info *mii = &dev->mii; + int ret = 0, timeout = 0; + u32 buf, link_up = 0; + + /* Set the phy in Gig loopback */ + smsc75xx_mdio_write(dev->net, mii->phy_id, MII_BMCR, 0x4040); + + /* Wait for the link up */ + do { + link_up = smsc75xx_link_ok_nopm(dev); + usleep_range(10000, 20000); + timeout++; + } while ((!link_up) && (timeout < 1000)); + + if (timeout >= 1000) { + netdev_warn(dev->net, "Timeout waiting for PHY link up\n"); + return -EIO; + } + + /* phy reset */ + ret = smsc75xx_read_reg(dev, PMT_CTL, &buf); + if (ret < 0) { + netdev_warn(dev->net, "Failed to read PMT_CTL: %d\n", ret); + return ret; + } + + buf |= PMT_CTL_PHY_RST; + + ret = smsc75xx_write_reg(dev, PMT_CTL, buf); + if (ret < 0) { + netdev_warn(dev->net, "Failed to write PMT_CTL: %d\n", ret); + return ret; + } + + timeout = 0; + do { + usleep_range(10000, 20000); + ret = smsc75xx_read_reg(dev, PMT_CTL, &buf); + if (ret < 0) { + netdev_warn(dev->net, "Failed to read PMT_CTL: %d\n", + ret); + return ret; + } + timeout++; + } while ((buf & PMT_CTL_PHY_RST) && (timeout < 100)); + + if (timeout >= 100) { + netdev_warn(dev->net, "timeout waiting for PHY Reset\n"); + return -EIO; + } + + return 0; +} + static int smsc75xx_reset(struct usbnet *dev) { struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]); -- cgit v1.2.3 From 110743189c863e96dc08a581d56c50b965870a3f Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Wed, 4 Jul 2018 10:49:43 +0100 Subject: ASoC: qdsp6: q6afe-dai: do not close port if its not opened afe ports are open as part of prepare, so for use cases like "aplay sample.wav" were sample.wav is not present. This would call port close eventhough port was never opened. DSP would return errors for such use cases. Avoid doing this by checking the port state. Signed-off-by: Srinivas Kandagatla Signed-off-by: Mark Brown --- sound/soc/qcom/qdsp6/q6afe-dai.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/soc/qcom/qdsp6/q6afe-dai.c b/sound/soc/qcom/qdsp6/q6afe-dai.c index 5002dd05bf27..a373ca5523ff 100644 --- a/sound/soc/qcom/qdsp6/q6afe-dai.c +++ b/sound/soc/qcom/qdsp6/q6afe-dai.c @@ -315,6 +315,9 @@ static void q6afe_dai_shutdown(struct snd_pcm_substream *substream, struct q6afe_dai_data *dai_data = dev_get_drvdata(dai->dev); int rc; + if (!dai_data->is_port_started[dai->id]) + return; + rc = q6afe_port_stop(dai_data->port[dai->id]); if (rc < 0) dev_err(dai->dev, "fail to close AFE port (%d)\n", rc); -- cgit v1.2.3 From 5dffc1752cabde6396fca28ff8343febfa524512 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Wed, 4 Jul 2018 10:49:44 +0100 Subject: ASoC: qdsp6: q6asm-dai: do not close port if its not opened asm ports are open as part of prepare, so for use cases like "aplay sample.wav" were sample.wav is not present. This would call port close eventhough port was never opened. DSP would return errors for such use cases. Avoid doing this by checking the port state. Signed-off-by: Srinivas Kandagatla Signed-off-by: Mark Brown --- sound/soc/qcom/qdsp6/q6asm-dai.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/soc/qcom/qdsp6/q6asm-dai.c b/sound/soc/qcom/qdsp6/q6asm-dai.c index 349c6a883c63..360936703b3d 100644 --- a/sound/soc/qcom/qdsp6/q6asm-dai.c +++ b/sound/soc/qcom/qdsp6/q6asm-dai.c @@ -390,7 +390,9 @@ static int q6asm_dai_close(struct snd_pcm_substream *substream) struct q6asm_dai_rtd *prtd = runtime->private_data; if (prtd->audio_client) { - q6asm_cmd(prtd->audio_client, CMD_CLOSE); + if (prtd->state) + q6asm_cmd(prtd->audio_client, CMD_CLOSE); + q6asm_unmap_memory_regions(substream->stream, prtd->audio_client); q6asm_audio_client_free(prtd->audio_client); -- cgit v1.2.3 From da13ed1d80fe6a4d95043aaf2e0aff292ade5708 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Wed, 4 Jul 2018 09:28:28 -0500 Subject: ASoC: nau8825: use 64-bit arithmetic instead of 32-bit Add suffix ULL to constant 256 in order to give the compiler complete information about the proper arithmetic to use. Notice that such constant is used in a context that expects an expression of type u64 (64 bits, unsigned) and the following expression is currently being evaluated using 32-bit arithmetic: 256 * fs * 2 * mclk_src_scaling[i].param Addresses-Coverity-ID: 1339616 ("Unintentional integer overflow") Signed-off-by: Gustavo A. R. Silva Signed-off-by: Mark Brown --- sound/soc/codecs/nau8825.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c index dc6ea4987b7d..b9fed99d8b5e 100644 --- a/sound/soc/codecs/nau8825.c +++ b/sound/soc/codecs/nau8825.c @@ -2016,7 +2016,7 @@ static int nau8825_calc_fll_param(unsigned int fll_in, unsigned int fs, fvco_max = 0; fvco_sel = ARRAY_SIZE(mclk_src_scaling); for (i = 0; i < ARRAY_SIZE(mclk_src_scaling); i++) { - fvco = 256 * fs * 2 * mclk_src_scaling[i].param; + fvco = 256ULL * fs * 2 * mclk_src_scaling[i].param; if (fvco > NAU_FVCO_MIN && fvco < NAU_FVCO_MAX && fvco_max < fvco) { fvco_max = fvco; -- cgit v1.2.3 From dae35d1f4f7dab9ccef20037df91c43e680bad0f Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 4 Jul 2018 16:01:43 +0200 Subject: ASoC: davinci: Use snd_pcm_stop_xrun() helper Replace open-codes with the standard snd_pcm_stop_xrun() helper. It simplifies codes a lot. Signed-off-by: Takashi Iwai Signed-off-by: Mark Brown --- sound/soc/davinci/davinci-mcasp.c | 16 ++++------------ 1 file changed, 4 insertions(+), 12 deletions(-) diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c index 47c0c821d325..f70db8412c7c 100644 --- a/sound/soc/davinci/davinci-mcasp.c +++ b/sound/soc/davinci/davinci-mcasp.c @@ -320,12 +320,8 @@ static irqreturn_t davinci_mcasp_tx_irq_handler(int irq, void *data) handled_mask |= XUNDRN; substream = mcasp->substreams[SNDRV_PCM_STREAM_PLAYBACK]; - if (substream) { - snd_pcm_stream_lock_irq(substream); - if (snd_pcm_running(substream)) - snd_pcm_stop(substream, SNDRV_PCM_STATE_XRUN); - snd_pcm_stream_unlock_irq(substream); - } + if (substream) + snd_pcm_stop_xrun(substream); } if (!handled_mask) @@ -355,12 +351,8 @@ static irqreturn_t davinci_mcasp_rx_irq_handler(int irq, void *data) handled_mask |= ROVRN; substream = mcasp->substreams[SNDRV_PCM_STREAM_CAPTURE]; - if (substream) { - snd_pcm_stream_lock_irq(substream); - if (snd_pcm_running(substream)) - snd_pcm_stop(substream, SNDRV_PCM_STATE_XRUN); - snd_pcm_stream_unlock_irq(substream); - } + if (substream) + snd_pcm_stop_xrun(substream); } if (!handled_mask) -- cgit v1.2.3 From 1a42e7e3aff1aa4789378020318dff7432317d25 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 4 Jul 2018 16:01:44 +0200 Subject: ASoC: qcom: Use snd_pcm_stop_xrun() helper The XRUN trigger from the driver should be done via snd_pcm_stop_xrun(). It fixes the missing stream locking as a gratis, too. Signed-off-by: Takashi Iwai Signed-off-by: Mark Brown --- sound/soc/qcom/lpass-platform.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/qcom/lpass-platform.c b/sound/soc/qcom/lpass-platform.c index 31fe78aa207f..d07271ea4c45 100644 --- a/sound/soc/qcom/lpass-platform.c +++ b/sound/soc/qcom/lpass-platform.c @@ -458,7 +458,7 @@ static irqreturn_t lpass_dma_interrupt_handler( return IRQ_NONE; } dev_warn(soc_runtime->dev, "xrun warning\n"); - snd_pcm_stop(substream, SNDRV_PCM_STATE_XRUN); + snd_pcm_stop_xrun(substream); ret = IRQ_HANDLED; } -- cgit v1.2.3 From dc865fb9e7c2251c9585ff6a7bf185d499db13e4 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 4 Jul 2018 16:01:45 +0200 Subject: ASoC: sti: Use snd_pcm_stop_xrun() helper The XRUN trigger from the driver should be done via snd_pcm_stop_xrun(). It fixes the missing stream locking as a gratis, too. Signed-off-by: Takashi Iwai Signed-off-by: Mark Brown --- sound/soc/sti/uniperif_player.c | 6 +++--- sound/soc/sti/uniperif_reader.c | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/soc/sti/uniperif_player.c b/sound/soc/sti/uniperif_player.c index d8b6936e544e..313dab2857ef 100644 --- a/sound/soc/sti/uniperif_player.c +++ b/sound/soc/sti/uniperif_player.c @@ -91,7 +91,7 @@ static irqreturn_t uni_player_irq_handler(int irq, void *dev_id) SET_UNIPERIF_ITM_BCLR_FIFO_ERROR(player); /* Stop the player */ - snd_pcm_stop(player->substream, SNDRV_PCM_STATE_XRUN); + snd_pcm_stop_xrun(player->substream); } ret = IRQ_HANDLED; @@ -105,7 +105,7 @@ static irqreturn_t uni_player_irq_handler(int irq, void *dev_id) SET_UNIPERIF_ITM_BCLR_DMA_ERROR(player); /* Stop the player */ - snd_pcm_stop(player->substream, SNDRV_PCM_STATE_XRUN); + snd_pcm_stop_xrun(player->substream); ret = IRQ_HANDLED; } @@ -138,7 +138,7 @@ static irqreturn_t uni_player_irq_handler(int irq, void *dev_id) dev_err(player->dev, "Underflow recovery failed\n"); /* Stop the player */ - snd_pcm_stop(player->substream, SNDRV_PCM_STATE_XRUN); + snd_pcm_stop_xrun(player->substream); ret = IRQ_HANDLED; } diff --git a/sound/soc/sti/uniperif_reader.c b/sound/soc/sti/uniperif_reader.c index ee0055e60852..7b63d35ef428 100644 --- a/sound/soc/sti/uniperif_reader.c +++ b/sound/soc/sti/uniperif_reader.c @@ -65,7 +65,7 @@ static irqreturn_t uni_reader_irq_handler(int irq, void *dev_id) if (unlikely(status & UNIPERIF_ITS_FIFO_ERROR_MASK(reader))) { dev_err(reader->dev, "FIFO error detected\n"); - snd_pcm_stop(reader->substream, SNDRV_PCM_STATE_XRUN); + snd_pcm_stop_xrun(reader->substream); ret = IRQ_HANDLED; } -- cgit v1.2.3 From b1625fbb3b87affbedf14545b65d69ff182a0611 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 4 Jul 2018 16:01:46 +0200 Subject: ASoC: stm32: Use snd_pcm_stop_xrun() helper The XRUN trigger from the driver should be done via snd_pcm_stop_xrun(). It simplifies the locking as well. Signed-off-by: Takashi Iwai Signed-off-by: Mark Brown --- sound/soc/stm/stm32_sai_sub.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/sound/soc/stm/stm32_sai_sub.c b/sound/soc/stm/stm32_sai_sub.c index c4f15ea14197..06fba9650ac4 100644 --- a/sound/soc/stm/stm32_sai_sub.c +++ b/sound/soc/stm/stm32_sai_sub.c @@ -300,11 +300,8 @@ static irqreturn_t stm32_sai_isr(int irq, void *devid) status = SNDRV_PCM_STATE_XRUN; } - if (status != SNDRV_PCM_STATE_RUNNING) { - snd_pcm_stream_lock(sai->substream); - snd_pcm_stop(sai->substream, SNDRV_PCM_STATE_XRUN); - snd_pcm_stream_unlock(sai->substream); - } + if (status != SNDRV_PCM_STATE_RUNNING) + snd_pcm_stop_xrun(sai->substream); return IRQ_HANDLED; } -- cgit v1.2.3 From 25090bc3f36cc3c171ec020dcc89c71db6bd0a67 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Wed, 4 Jul 2018 10:49:39 +0100 Subject: ASoC: qdsp6: q6afe: Add missing slimbus capture ports Existing code already has support for SLIMbus TX and RX, only thing that was missing from TX side was mapping between virtual to actual DSP port ids. This patch adds those mappings. Signed-off-by: Srinivas Kandagatla Signed-off-by: Mark Brown --- sound/soc/qcom/qdsp6/q6afe.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/sound/soc/qcom/qdsp6/q6afe.c b/sound/soc/qcom/qdsp6/q6afe.c index 671743453fbb..000775b4bba8 100644 --- a/sound/soc/qcom/qdsp6/q6afe.c +++ b/sound/soc/qcom/qdsp6/q6afe.c @@ -514,6 +514,20 @@ static struct afe_port_map port_maps[AFE_PORT_MAX] = { SLIMBUS_5_RX, 1, 1}, [SLIMBUS_6_RX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_6_RX, SLIMBUS_6_RX, 1, 1}, + [SLIMBUS_0_TX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_0_TX, + SLIMBUS_0_TX, 0, 1}, + [SLIMBUS_1_TX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_1_TX, + SLIMBUS_1_TX, 0, 1}, + [SLIMBUS_2_TX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_2_TX, + SLIMBUS_2_TX, 0, 1}, + [SLIMBUS_3_TX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_3_TX, + SLIMBUS_3_TX, 0, 1}, + [SLIMBUS_4_TX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_4_TX, + SLIMBUS_4_TX, 0, 1}, + [SLIMBUS_5_TX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_5_TX, + SLIMBUS_5_TX, 0, 1}, + [SLIMBUS_6_TX] = { AFE_PORT_ID_SLIMBUS_MULTI_CHAN_6_TX, + SLIMBUS_6_TX, 0, 1}, [PRIMARY_MI2S_RX] = { AFE_PORT_ID_PRIMARY_MI2S_RX, PRIMARY_MI2S_RX, 1, 1}, [PRIMARY_MI2S_TX] = { AFE_PORT_ID_PRIMARY_MI2S_TX, @@ -1372,6 +1386,13 @@ struct q6afe_port *q6afe_port_get_from_id(struct device *dev, int id) case AFE_PORT_ID_MULTICHAN_HDMI_RX: cfg_type = AFE_PARAM_ID_HDMI_CONFIG; break; + case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_0_TX: + case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_1_TX: + case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_2_TX: + case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_3_TX: + case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_4_TX: + case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_5_TX: + case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_6_TX: case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_0_RX: case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_1_RX: case AFE_PORT_ID_SLIMBUS_MULTI_CHAN_2_RX: -- cgit v1.2.3 From f03d6b1b4d2460a749fb2826aa71e15a66104a88 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Wed, 4 Jul 2018 10:49:40 +0100 Subject: ASoC: qdsp6: q6afe-dai: add support to slim tx dais This patch adds support to SLIMbus TX dais in AFE module. Signed-off-by: Srinivas Kandagatla Signed-off-by: Mark Brown --- sound/soc/qcom/qdsp6/q6afe-dai.c | 175 +++++++++++++++++++++++++++++++++++---- 1 file changed, 161 insertions(+), 14 deletions(-) diff --git a/sound/soc/qcom/qdsp6/q6afe-dai.c b/sound/soc/qcom/qdsp6/q6afe-dai.c index 1d2e5013c121..8dd3683eb367 100644 --- a/sound/soc/qcom/qdsp6/q6afe-dai.c +++ b/sound/soc/qcom/qdsp6/q6afe-dai.c @@ -382,23 +382,31 @@ static int q6slim_set_channel_map(struct snd_soc_dai *dai, struct q6afe_port_config *pcfg = &dai_data->port_config[dai->id]; int i; - if (!rx_slot) { - pr_err("%s: rx slot not found\n", __func__); - return -EINVAL; - } + if (dai->id & 0x1) { + /* TX */ + if (!tx_slot) { + pr_err("%s: tx slot not found\n", __func__); + return -EINVAL; + } - for (i = 0; i < rx_num; i++) { - pcfg->slim.ch_mapping[i] = rx_slot[i]; - pr_debug("%s: find number of channels[%d] ch[%d]\n", - __func__, i, rx_slot[i]); - } + for (i = 0; i < tx_num; i++) + pcfg->slim.ch_mapping[i] = tx_slot[i]; + + pcfg->slim.num_channels = tx_num; + + + } else { + if (!rx_slot) { + pr_err("%s: rx slot not found\n", __func__); + return -EINVAL; + } - pcfg->slim.num_channels = rx_num; + for (i = 0; i < rx_num; i++) + pcfg->slim.ch_mapping[i] = rx_slot[i]; - pr_debug("%s: SLIMBUS_%d_RX cnt[%d] ch[%d %d]\n", __func__, - (dai->id - SLIMBUS_0_RX) / 2, rx_num, - pcfg->slim.ch_mapping[0], - pcfg->slim.ch_mapping[1]); + pcfg->slim.num_channels = rx_num; + + } return 0; } @@ -443,6 +451,14 @@ static const struct snd_soc_dapm_route q6afe_dapm_routes[] = { {"Slimbus5 Playback", NULL, "SLIMBUS_5_RX"}, {"Slimbus6 Playback", NULL, "SLIMBUS_6_RX"}, + {"SLIMBUS_0_TX", NULL, "Slimbus Capture"}, + {"SLIMBUS_1_TX", NULL, "Slimbus1 Capture"}, + {"SLIMBUS_2_TX", NULL, "Slimbus2 Capture"}, + {"SLIMBUS_3_TX", NULL, "Slimbus3 Capture"}, + {"SLIMBUS_4_TX", NULL, "Slimbus4 Capture"}, + {"SLIMBUS_5_TX", NULL, "Slimbus5 Capture"}, + {"SLIMBUS_6_TX", NULL, "Slimbus6 Capture"}, + {"Primary MI2S Playback", NULL, "PRI_MI2S_RX"}, {"Secondary MI2S Playback", NULL, "SEC_MI2S_RX"}, {"Tertiary MI2S Playback", NULL, "TERT_MI2S_RX"}, @@ -636,6 +652,24 @@ static struct snd_soc_dai_driver q6afe_dais[] = { .rate_min = 8000, .rate_max = 192000, }, + }, { + .name = "SLIMBUS_0_TX", + .ops = &q6slim_ops, + .id = SLIMBUS_0_TX, + .probe = msm_dai_q6_dai_probe, + .remove = msm_dai_q6_dai_remove, + .capture = { + .stream_name = "Slimbus Capture", + .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 | + SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_96000 | + SNDRV_PCM_RATE_192000, + .formats = SNDRV_PCM_FMTBIT_S16_LE | + SNDRV_PCM_FMTBIT_S24_LE, + .channels_min = 1, + .channels_max = 8, + .rate_min = 8000, + .rate_max = 192000, + }, }, { .playback = { .stream_name = "Slimbus1 Playback", @@ -654,6 +688,24 @@ static struct snd_soc_dai_driver q6afe_dais[] = { .id = SLIMBUS_1_RX, .probe = msm_dai_q6_dai_probe, .remove = msm_dai_q6_dai_remove, + }, { + .name = "SLIMBUS_1_TX", + .ops = &q6slim_ops, + .id = SLIMBUS_1_TX, + .probe = msm_dai_q6_dai_probe, + .remove = msm_dai_q6_dai_remove, + .capture = { + .stream_name = "Slimbus1 Capture", + .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 | + SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_96000 | + SNDRV_PCM_RATE_192000, + .formats = SNDRV_PCM_FMTBIT_S16_LE | + SNDRV_PCM_FMTBIT_S24_LE, + .channels_min = 1, + .channels_max = 8, + .rate_min = 8000, + .rate_max = 192000, + }, }, { .playback = { .stream_name = "Slimbus2 Playback", @@ -672,6 +724,25 @@ static struct snd_soc_dai_driver q6afe_dais[] = { .id = SLIMBUS_2_RX, .probe = msm_dai_q6_dai_probe, .remove = msm_dai_q6_dai_remove, + + }, { + .name = "SLIMBUS_2_TX", + .ops = &q6slim_ops, + .id = SLIMBUS_2_TX, + .probe = msm_dai_q6_dai_probe, + .remove = msm_dai_q6_dai_remove, + .capture = { + .stream_name = "Slimbus2 Capture", + .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 | + SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_96000 | + SNDRV_PCM_RATE_192000, + .formats = SNDRV_PCM_FMTBIT_S16_LE | + SNDRV_PCM_FMTBIT_S24_LE, + .channels_min = 1, + .channels_max = 8, + .rate_min = 8000, + .rate_max = 192000, + }, }, { .playback = { .stream_name = "Slimbus3 Playback", @@ -690,6 +761,25 @@ static struct snd_soc_dai_driver q6afe_dais[] = { .id = SLIMBUS_3_RX, .probe = msm_dai_q6_dai_probe, .remove = msm_dai_q6_dai_remove, + + }, { + .name = "SLIMBUS_3_TX", + .ops = &q6slim_ops, + .id = SLIMBUS_3_TX, + .probe = msm_dai_q6_dai_probe, + .remove = msm_dai_q6_dai_remove, + .capture = { + .stream_name = "Slimbus3 Capture", + .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 | + SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_96000 | + SNDRV_PCM_RATE_192000, + .formats = SNDRV_PCM_FMTBIT_S16_LE | + SNDRV_PCM_FMTBIT_S24_LE, + .channels_min = 1, + .channels_max = 8, + .rate_min = 8000, + .rate_max = 192000, + }, }, { .playback = { .stream_name = "Slimbus4 Playback", @@ -708,6 +798,25 @@ static struct snd_soc_dai_driver q6afe_dais[] = { .id = SLIMBUS_4_RX, .probe = msm_dai_q6_dai_probe, .remove = msm_dai_q6_dai_remove, + + }, { + .name = "SLIMBUS_4_TX", + .ops = &q6slim_ops, + .id = SLIMBUS_4_TX, + .probe = msm_dai_q6_dai_probe, + .remove = msm_dai_q6_dai_remove, + .capture = { + .stream_name = "Slimbus4 Capture", + .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 | + SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_96000 | + SNDRV_PCM_RATE_192000, + .formats = SNDRV_PCM_FMTBIT_S16_LE | + SNDRV_PCM_FMTBIT_S24_LE, + .channels_min = 1, + .channels_max = 8, + .rate_min = 8000, + .rate_max = 192000, + }, }, { .playback = { .stream_name = "Slimbus5 Playback", @@ -726,6 +835,25 @@ static struct snd_soc_dai_driver q6afe_dais[] = { .id = SLIMBUS_5_RX, .probe = msm_dai_q6_dai_probe, .remove = msm_dai_q6_dai_remove, + + }, { + .name = "SLIMBUS_5_TX", + .ops = &q6slim_ops, + .id = SLIMBUS_5_TX, + .probe = msm_dai_q6_dai_probe, + .remove = msm_dai_q6_dai_remove, + .capture = { + .stream_name = "Slimbus5 Capture", + .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 | + SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_96000 | + SNDRV_PCM_RATE_192000, + .formats = SNDRV_PCM_FMTBIT_S16_LE | + SNDRV_PCM_FMTBIT_S24_LE, + .channels_min = 1, + .channels_max = 8, + .rate_min = 8000, + .rate_max = 192000, + }, }, { .playback = { .stream_name = "Slimbus6 Playback", @@ -744,6 +872,25 @@ static struct snd_soc_dai_driver q6afe_dais[] = { .id = SLIMBUS_6_RX, .probe = msm_dai_q6_dai_probe, .remove = msm_dai_q6_dai_remove, + + }, { + .name = "SLIMBUS_6_TX", + .ops = &q6slim_ops, + .id = SLIMBUS_6_TX, + .probe = msm_dai_q6_dai_probe, + .remove = msm_dai_q6_dai_remove, + .capture = { + .stream_name = "Slimbus6 Capture", + .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 | + SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_96000 | + SNDRV_PCM_RATE_192000, + .formats = SNDRV_PCM_FMTBIT_S16_LE | + SNDRV_PCM_FMTBIT_S24_LE, + .channels_min = 1, + .channels_max = 8, + .rate_min = 8000, + .rate_max = 192000, + }, }, { .playback = { .stream_name = "Primary MI2S Playback", -- cgit v1.2.3 From 9191ffe2d212f64aa2ec311f4294ba7066d1f8a1 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Wed, 4 Jul 2018 10:49:41 +0100 Subject: ASoC: qdsp6: q6routing: add slim rx routings This patch add routings mixer controls for slim rx ports. Signed-off-by: Srinivas Kandagatla Signed-off-by: Mark Brown --- sound/soc/qcom/qdsp6/q6routing.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/sound/soc/qcom/qdsp6/q6routing.c b/sound/soc/qcom/qdsp6/q6routing.c index c80fdbc2442e..35269b492761 100644 --- a/sound/soc/qcom/qdsp6/q6routing.c +++ b/sound/soc/qcom/qdsp6/q6routing.c @@ -68,6 +68,13 @@ { mix_name, "SEC_MI2S_TX", "SEC_MI2S_TX" }, \ { mix_name, "QUAT_MI2S_TX", "QUAT_MI2S_TX" }, \ { mix_name, "TERT_MI2S_TX", "TERT_MI2S_TX" }, \ + { mix_name, "SLIMBUS_0_TX", "SLIMBUS_0_TX" }, \ + { mix_name, "SLIMBUS_1_TX", "SLIMBUS_1_TX" }, \ + { mix_name, "SLIMBUS_2_TX", "SLIMBUS_2_TX" }, \ + { mix_name, "SLIMBUS_3_TX", "SLIMBUS_3_TX" }, \ + { mix_name, "SLIMBUS_4_TX", "SLIMBUS_4_TX" }, \ + { mix_name, "SLIMBUS_5_TX", "SLIMBUS_5_TX" }, \ + { mix_name, "SLIMBUS_6_TX", "SLIMBUS_6_TX" }, \ { mix_name, "PRIMARY_TDM_TX_0", "PRIMARY_TDM_TX_0"}, \ { mix_name, "PRIMARY_TDM_TX_1", "PRIMARY_TDM_TX_1"}, \ { mix_name, "PRIMARY_TDM_TX_2", "PRIMARY_TDM_TX_2"}, \ @@ -122,6 +129,27 @@ SOC_SINGLE_EXT("QUAT_MI2S_TX", QUATERNARY_MI2S_TX, \ id, 1, 0, msm_routing_get_audio_mixer, \ msm_routing_put_audio_mixer), \ + SOC_SINGLE_EXT("SLIMBUS_0_TX", SLIMBUS_0_TX, \ + id, 1, 0, msm_routing_get_audio_mixer, \ + msm_routing_put_audio_mixer), \ + SOC_SINGLE_EXT("SLIMBUS_1_TX", SLIMBUS_1_TX, \ + id, 1, 0, msm_routing_get_audio_mixer, \ + msm_routing_put_audio_mixer), \ + SOC_SINGLE_EXT("SLIMBUS_2_TX", SLIMBUS_2_TX, \ + id, 1, 0, msm_routing_get_audio_mixer, \ + msm_routing_put_audio_mixer), \ + SOC_SINGLE_EXT("SLIMBUS_3_TX", SLIMBUS_3_TX, \ + id, 1, 0, msm_routing_get_audio_mixer, \ + msm_routing_put_audio_mixer), \ + SOC_SINGLE_EXT("SLIMBUS_4_TX", SLIMBUS_4_TX, \ + id, 1, 0, msm_routing_get_audio_mixer, \ + msm_routing_put_audio_mixer), \ + SOC_SINGLE_EXT("SLIMBUS_5_TX", SLIMBUS_5_TX, \ + id, 1, 0, msm_routing_get_audio_mixer, \ + msm_routing_put_audio_mixer), \ + SOC_SINGLE_EXT("SLIMBUS_6_TX", SLIMBUS_6_TX, \ + id, 1, 0, msm_routing_get_audio_mixer, \ + msm_routing_put_audio_mixer), \ SOC_SINGLE_EXT("PRIMARY_TDM_TX_0", PRIMARY_TDM_TX_0, \ id, 1, 0, msm_routing_get_audio_mixer, \ msm_routing_put_audio_mixer), \ -- cgit v1.2.3 From f1478a1476d45c5d7b070c726f46a7b581d3103c Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Wed, 4 Jul 2018 10:49:42 +0100 Subject: ASoC: qdsp6: q6afe-dai: Do not overwrite slim dai num_channels num_channels for slim dais are aready set int set_channel_map, do not overwrite them in hw_params. Signed-off-by: Srinivas Kandagatla Signed-off-by: Mark Brown --- sound/soc/qcom/qdsp6/q6afe-dai.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/soc/qcom/qdsp6/q6afe-dai.c b/sound/soc/qcom/qdsp6/q6afe-dai.c index 8dd3683eb367..074582afda85 100644 --- a/sound/soc/qcom/qdsp6/q6afe-dai.c +++ b/sound/soc/qcom/qdsp6/q6afe-dai.c @@ -81,7 +81,6 @@ static int q6slim_hw_params(struct snd_pcm_substream *substream, struct q6afe_dai_data *dai_data = dev_get_drvdata(dai->dev); struct q6afe_slim_cfg *slim = &dai_data->port_config[dai->id].slim; - slim->num_channels = params_channels(params); slim->sample_rate = params_rate(params); switch (params_format(params)) { -- cgit v1.2.3 From 938f45008d8bc391593c97508bc798cc95a52b9b Mon Sep 17 00:00:00 2001 From: Donald Shanty III Date: Wed, 4 Jul 2018 15:50:47 +0000 Subject: Input: elan_i2c - add ACPI ID for lenovo ideapad 330 This allows Elan driver to bind to the touchpad found in Lenovo Ideapad 330 series laptops. Signed-off-by: Donald Shanty III Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/elan_i2c_core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c index 1f9cd7d8b7ad..e26d8c7d131d 100644 --- a/drivers/input/mouse/elan_i2c_core.c +++ b/drivers/input/mouse/elan_i2c_core.c @@ -1346,6 +1346,7 @@ static const struct acpi_device_id elan_acpi_id[] = { { "ELAN0611", 0 }, { "ELAN0612", 0 }, { "ELAN0618", 0 }, + { "ELAN061D", 0 }, { "ELAN1000", 0 }, { } }; -- cgit v1.2.3 From 28501bd2bcda319a58baa055277e7c48947a7ed6 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 4 Jul 2018 15:26:18 +0000 Subject: MAINTAINERS: Add file patterns for serio device tree bindings Submitters of device tree binding documentation may forget to CC the subsystem maintainer if this is missing. Signed-off-by: Geert Uytterhoeven Signed-off-by: Dmitry Torokhov --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 1078c0bc0efd..4d769ce53ff1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7005,6 +7005,7 @@ F: include/uapi/linux/input.h F: include/uapi/linux/input-event-codes.h F: include/linux/input/ F: Documentation/devicetree/bindings/input/ +F: Documentation/devicetree/bindings/serio/ F: Documentation/input/ INPUT MULTITOUCH (MT) PROTOCOL -- cgit v1.2.3 From df8ed346d4a806a6eef2db5924285e839604b3f9 Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Tue, 3 Jul 2018 22:34:54 +0200 Subject: net: phy: fix flag masking in __set_phy_supported Currently also the pause flags are removed from phydev->supported because they're not included in PHY_DEFAULT_FEATURES. I don't think this is intended, especially when considering that this function can be called via phy_set_max_speed() anywhere in a driver. Change the masking to mask out only the values we're going to change. In addition remove the misleading comment, job of this small function is just to adjust the supported and advertised speeds. Fixes: f3a6bd393c2c ("phylib: Add phy_set_max_speed helper") Signed-off-by: Heiner Kallweit Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/phy_device.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index bd0f339f69fd..b9f5f40a7ac1 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -1724,11 +1724,8 @@ EXPORT_SYMBOL(genphy_loopback); static int __set_phy_supported(struct phy_device *phydev, u32 max_speed) { - /* The default values for phydev->supported are provided by the PHY - * driver "features" member, we want to reset to sane defaults first - * before supporting higher speeds. - */ - phydev->supported &= PHY_DEFAULT_FEATURES; + phydev->supported &= ~(PHY_1000BT_FEATURES | PHY_100BT_FEATURES | + PHY_10BT_FEATURES); switch (max_speed) { default: -- cgit v1.2.3 From 5e7ba042fd05043416babace5a4a953e29cf2826 Mon Sep 17 00:00:00 2001 From: Denis Bolotin Date: Wed, 4 Jul 2018 17:06:46 +0300 Subject: qed: Fix reading stale configuration information Configuration information read at driver load can become stale after it is updated. Mark information as not valid and re-populate when this happens. Signed-off-by: Denis Bolotin Signed-off-by: Ariel Elior Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed.h | 1 + drivers/net/ethernet/qlogic/qed/qed_mcp.c | 39 +++++++++++++++++++++---------- 2 files changed, 28 insertions(+), 12 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed.h b/drivers/net/ethernet/qlogic/qed/qed.h index 00db3401b898..1dfaccd151f0 100644 --- a/drivers/net/ethernet/qlogic/qed/qed.h +++ b/drivers/net/ethernet/qlogic/qed/qed.h @@ -502,6 +502,7 @@ enum BAR_ID { struct qed_nvm_image_info { u32 num_images; struct bist_nvm_image_att *image_att; + bool valid; }; #define DRV_MODULE_VERSION \ diff --git a/drivers/net/ethernet/qlogic/qed/qed_mcp.c b/drivers/net/ethernet/qlogic/qed/qed_mcp.c index 4e0b443c9519..9d9e533bccdc 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_mcp.c +++ b/drivers/net/ethernet/qlogic/qed/qed_mcp.c @@ -592,6 +592,9 @@ int qed_mcp_nvm_wr_cmd(struct qed_hwfn *p_hwfn, *o_mcp_resp = mb_params.mcp_resp; *o_mcp_param = mb_params.mcp_param; + /* nvm_info needs to be updated */ + p_hwfn->nvm_info.valid = false; + return 0; } @@ -2555,11 +2558,14 @@ int qed_mcp_bist_nvm_get_image_att(struct qed_hwfn *p_hwfn, int qed_mcp_nvm_info_populate(struct qed_hwfn *p_hwfn) { - struct qed_nvm_image_info *nvm_info = &p_hwfn->nvm_info; + struct qed_nvm_image_info nvm_info; struct qed_ptt *p_ptt; int rc; u32 i; + if (p_hwfn->nvm_info.valid) + return 0; + p_ptt = qed_ptt_acquire(p_hwfn); if (!p_ptt) { DP_ERR(p_hwfn, "failed to acquire ptt\n"); @@ -2567,29 +2573,29 @@ int qed_mcp_nvm_info_populate(struct qed_hwfn *p_hwfn) } /* Acquire from MFW the amount of available images */ - nvm_info->num_images = 0; + nvm_info.num_images = 0; rc = qed_mcp_bist_nvm_get_num_images(p_hwfn, - p_ptt, &nvm_info->num_images); + p_ptt, &nvm_info.num_images); if (rc == -EOPNOTSUPP) { DP_INFO(p_hwfn, "DRV_MSG_CODE_BIST_TEST is not supported\n"); goto out; - } else if (rc || !nvm_info->num_images) { + } else if (rc || !nvm_info.num_images) { DP_ERR(p_hwfn, "Failed getting number of images\n"); goto err0; } - nvm_info->image_att = kmalloc_array(nvm_info->num_images, - sizeof(struct bist_nvm_image_att), - GFP_KERNEL); - if (!nvm_info->image_att) { + nvm_info.image_att = kmalloc_array(nvm_info.num_images, + sizeof(struct bist_nvm_image_att), + GFP_KERNEL); + if (!nvm_info.image_att) { rc = -ENOMEM; goto err0; } /* Iterate over images and get their attributes */ - for (i = 0; i < nvm_info->num_images; i++) { + for (i = 0; i < nvm_info.num_images; i++) { rc = qed_mcp_bist_nvm_get_image_att(p_hwfn, p_ptt, - &nvm_info->image_att[i], i); + &nvm_info.image_att[i], i); if (rc) { DP_ERR(p_hwfn, "Failed getting image index %d attributes\n", i); @@ -2597,14 +2603,22 @@ int qed_mcp_nvm_info_populate(struct qed_hwfn *p_hwfn) } DP_VERBOSE(p_hwfn, QED_MSG_SP, "image index %d, size %x\n", i, - nvm_info->image_att[i].len); + nvm_info.image_att[i].len); } out: + /* Update hwfn's nvm_info */ + if (nvm_info.num_images) { + p_hwfn->nvm_info.num_images = nvm_info.num_images; + kfree(p_hwfn->nvm_info.image_att); + p_hwfn->nvm_info.image_att = nvm_info.image_att; + p_hwfn->nvm_info.valid = true; + } + qed_ptt_release(p_hwfn, p_ptt); return 0; err1: - kfree(nvm_info->image_att); + kfree(nvm_info.image_att); err0: qed_ptt_release(p_hwfn, p_ptt); return rc; @@ -2641,6 +2655,7 @@ qed_mcp_get_nvm_image_att(struct qed_hwfn *p_hwfn, return -EINVAL; } + qed_mcp_nvm_info_populate(p_hwfn); for (i = 0; i < p_hwfn->nvm_info.num_images; i++) if (type == p_hwfn->nvm_info.image_att[i].image_type) break; -- cgit v1.2.3 From a930d8bd94d8db7715d1af74299f710b1fb22fc8 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 4 Jul 2018 10:09:58 -0300 Subject: usb: chipidea: Always build ULPI code Commit 03e6275ae381 ("usb: chipidea: Fix ULPI on imx51") causes a kernel hang on imx51 systems that use the ULPI interface and do not select the CONFIG_USB_CHIPIDEA_ULPI option. In order to avoid such potential misuse, let's always build the chipidea ULPI code into the final ci_hdrc object. Tested on a imx51-babbage board. Fixes: 03e6275ae381 ("usb: chipidea: Fix ULPI on imx51") Signed-off-by: Fabio Estevam Signed-off-by: Peter Chen --- drivers/usb/chipidea/Kconfig | 9 +-------- drivers/usb/chipidea/Makefile | 3 +-- drivers/usb/chipidea/ci.h | 8 -------- drivers/usb/chipidea/ulpi.c | 3 +++ 4 files changed, 5 insertions(+), 18 deletions(-) diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig index 785f0ed037f7..ee34e9046f7e 100644 --- a/drivers/usb/chipidea/Kconfig +++ b/drivers/usb/chipidea/Kconfig @@ -3,6 +3,7 @@ config USB_CHIPIDEA depends on ((USB_EHCI_HCD && USB_GADGET) || (USB_EHCI_HCD && !USB_GADGET) || (!USB_EHCI_HCD && USB_GADGET)) && HAS_DMA select EXTCON select RESET_CONTROLLER + select USB_ULPI_BUS help Say Y here if your system has a dual role high speed USB controller based on ChipIdea silicon IP. It supports: @@ -38,12 +39,4 @@ config USB_CHIPIDEA_HOST help Say Y here to enable host controller functionality of the ChipIdea driver. - -config USB_CHIPIDEA_ULPI - bool "ChipIdea ULPI PHY support" - depends on USB_ULPI_BUS=y || USB_ULPI_BUS=USB_CHIPIDEA - help - Say Y here if you have a ULPI PHY attached to your ChipIdea - controller. - endif diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile index e3d5e728fa53..12df94f78f72 100644 --- a/drivers/usb/chipidea/Makefile +++ b/drivers/usb/chipidea/Makefile @@ -1,11 +1,10 @@ # SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_USB_CHIPIDEA) += ci_hdrc.o -ci_hdrc-y := core.o otg.o debug.o +ci_hdrc-y := core.o otg.o debug.o ulpi.o ci_hdrc-$(CONFIG_USB_CHIPIDEA_UDC) += udc.o ci_hdrc-$(CONFIG_USB_CHIPIDEA_HOST) += host.o ci_hdrc-$(CONFIG_USB_OTG_FSM) += otg_fsm.o -ci_hdrc-$(CONFIG_USB_CHIPIDEA_ULPI) += ulpi.o # Glue/Bridge layers go here diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h index 0bf244d50544..6a2cc5cd0281 100644 --- a/drivers/usb/chipidea/ci.h +++ b/drivers/usb/chipidea/ci.h @@ -240,10 +240,8 @@ struct ci_hdrc { struct ci_hdrc_platform_data *platdata; int vbus_active; -#ifdef CONFIG_USB_CHIPIDEA_ULPI struct ulpi *ulpi; struct ulpi_ops ulpi_ops; -#endif struct phy *phy; /* old usb_phy interface */ struct usb_phy *usb_phy; @@ -426,15 +424,9 @@ static inline bool ci_otg_is_fsm_mode(struct ci_hdrc *ci) #endif } -#if IS_ENABLED(CONFIG_USB_CHIPIDEA_ULPI) int ci_ulpi_init(struct ci_hdrc *ci); void ci_ulpi_exit(struct ci_hdrc *ci); int ci_ulpi_resume(struct ci_hdrc *ci); -#else -static inline int ci_ulpi_init(struct ci_hdrc *ci) { return 0; } -static inline void ci_ulpi_exit(struct ci_hdrc *ci) { } -static inline int ci_ulpi_resume(struct ci_hdrc *ci) { return 0; } -#endif u32 hw_read_intr_enable(struct ci_hdrc *ci); diff --git a/drivers/usb/chipidea/ulpi.c b/drivers/usb/chipidea/ulpi.c index 6da42dcd2888..dfec07e8ae1d 100644 --- a/drivers/usb/chipidea/ulpi.c +++ b/drivers/usb/chipidea/ulpi.c @@ -95,6 +95,9 @@ int ci_ulpi_resume(struct ci_hdrc *ci) { int cnt = 100000; + if (ci->platdata->phy_mode != USBPHY_INTERFACE_MODE_ULPI) + return 0; + while (cnt-- > 0) { if (hw_read(ci, OP_ULPI_VIEWPORT, ULPI_SYNC_STATE)) return 0; -- cgit v1.2.3 From 6cef21a1964933b77c855c55bac2723053cc676d Mon Sep 17 00:00:00 2001 From: Hang Yuan Date: Tue, 3 Jul 2018 17:31:17 +0800 Subject: drm/i915/gvt: update vreg on inhibit context lri command Commit cd7e 61b9"init mmio by lri command in vgpu inhibit context" initializes registers saved/restored in context with its vreg value through lri command in ring buffer. It relies on vreg got updated on every guest access. There is a case found that Linux guest uses lri command in inhibit-ctx to update the register. This patch adds vreg update on this case. v2: move mmio_attribute functions to gvt.h (Zhenyu) v3: use mask_mmio_write in vreg update v4: refine codes and add more comments (Zhenyu) Fixes: cd7e61b9("drm/i915/gvt: init mmio by lri command in vgpu inhibit context") Signed-off-by: Hang Yuan Signed-off-by: Weinan Li Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/cmd_parser.c | 23 +++++++++++++++++++++++ drivers/gpu/drm/i915/gvt/gvt.h | 29 +++++++++++++++++++++++++++++ drivers/gpu/drm/i915/gvt/handlers.c | 24 ++++++++++++++++++++++++ drivers/gpu/drm/i915/gvt/mmio.h | 2 ++ drivers/gpu/drm/i915/gvt/mmio_context.c | 4 +++- 5 files changed, 81 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/gvt/cmd_parser.c b/drivers/gpu/drm/i915/gvt/cmd_parser.c index b51c05d03f14..7f562410f9cf 100644 --- a/drivers/gpu/drm/i915/gvt/cmd_parser.c +++ b/drivers/gpu/drm/i915/gvt/cmd_parser.c @@ -862,6 +862,7 @@ static int cmd_reg_handler(struct parser_exec_state *s, { struct intel_vgpu *vgpu = s->vgpu; struct intel_gvt *gvt = vgpu->gvt; + u32 ctx_sr_ctl; if (offset + 4 > gvt->device_info.mmio_size) { gvt_vgpu_err("%s access to (%x) outside of MMIO range\n", @@ -894,6 +895,28 @@ static int cmd_reg_handler(struct parser_exec_state *s, patch_value(s, cmd_ptr(s, index), VGT_PVINFO_PAGE); } + /* TODO + * Right now only scan LRI command on KBL and in inhibit context. + * It's good enough to support initializing mmio by lri command in + * vgpu inhibit context on KBL. + */ + if (IS_KABYLAKE(s->vgpu->gvt->dev_priv) && + intel_gvt_mmio_is_in_ctx(gvt, offset) && + !strncmp(cmd, "lri", 3)) { + intel_gvt_hypervisor_read_gpa(s->vgpu, + s->workload->ring_context_gpa + 12, &ctx_sr_ctl, 4); + /* check inhibit context */ + if (ctx_sr_ctl & 1) { + u32 data = cmd_val(s, index + 1); + + if (intel_gvt_mmio_has_mode_mask(s->vgpu->gvt, offset)) + intel_vgpu_mask_mmio_write(vgpu, + offset, &data, 4); + else + vgpu_vreg(vgpu, offset) = data; + } + } + /* TODO: Update the global mask if this MMIO is a masked-MMIO */ intel_gvt_mmio_set_cmd_accessed(gvt, offset); return 0; diff --git a/drivers/gpu/drm/i915/gvt/gvt.h b/drivers/gpu/drm/i915/gvt/gvt.h index 05d15a095310..858967daf04b 100644 --- a/drivers/gpu/drm/i915/gvt/gvt.h +++ b/drivers/gpu/drm/i915/gvt/gvt.h @@ -268,6 +268,8 @@ struct intel_gvt_mmio { #define F_CMD_ACCESSED (1 << 5) /* This reg could be accessed by unaligned address */ #define F_UNALIGN (1 << 6) +/* This reg is saved/restored in context */ +#define F_IN_CTX (1 << 7) struct gvt_mmio_block *mmio_block; unsigned int num_mmio_block; @@ -639,6 +641,33 @@ static inline bool intel_gvt_mmio_has_mode_mask( return gvt->mmio.mmio_attribute[offset >> 2] & F_MODE_MASK; } +/** + * intel_gvt_mmio_is_in_ctx - check if a MMIO has in-ctx mask + * @gvt: a GVT device + * @offset: register offset + * + * Returns: + * True if a MMIO has a in-context mask, false if it isn't. + * + */ +static inline bool intel_gvt_mmio_is_in_ctx( + struct intel_gvt *gvt, unsigned int offset) +{ + return gvt->mmio.mmio_attribute[offset >> 2] & F_IN_CTX; +} + +/** + * intel_gvt_mmio_set_in_ctx - mask a MMIO in logical context + * @gvt: a GVT device + * @offset: register offset + * + */ +static inline void intel_gvt_mmio_set_in_ctx( + struct intel_gvt *gvt, unsigned int offset) +{ + gvt->mmio.mmio_attribute[offset >> 2] |= F_IN_CTX; +} + int intel_gvt_debugfs_add_vgpu(struct intel_vgpu *vgpu); void intel_gvt_debugfs_remove_vgpu(struct intel_vgpu *vgpu); int intel_gvt_debugfs_init(struct intel_gvt *gvt); diff --git a/drivers/gpu/drm/i915/gvt/handlers.c b/drivers/gpu/drm/i915/gvt/handlers.c index bcbc47a88a70..8f1caacdc78a 100644 --- a/drivers/gpu/drm/i915/gvt/handlers.c +++ b/drivers/gpu/drm/i915/gvt/handlers.c @@ -3045,6 +3045,30 @@ int intel_vgpu_default_mmio_write(struct intel_vgpu *vgpu, unsigned int offset, return 0; } +/** + * intel_vgpu_mask_mmio_write - write mask register + * @vgpu: a vGPU + * @offset: access offset + * @p_data: write data buffer + * @bytes: access data length + * + * Returns: + * Zero on success, negative error code if failed. + */ +int intel_vgpu_mask_mmio_write(struct intel_vgpu *vgpu, unsigned int offset, + void *p_data, unsigned int bytes) +{ + u32 mask, old_vreg; + + old_vreg = vgpu_vreg(vgpu, offset); + write_vreg(vgpu, offset, p_data, bytes); + mask = vgpu_vreg(vgpu, offset) >> 16; + vgpu_vreg(vgpu, offset) = (old_vreg & ~mask) | + (vgpu_vreg(vgpu, offset) & mask); + + return 0; +} + /** * intel_gvt_in_force_nonpriv_whitelist - if a mmio is in whitelist to be * force-nopriv register diff --git a/drivers/gpu/drm/i915/gvt/mmio.h b/drivers/gpu/drm/i915/gvt/mmio.h index 71b620875943..dac8c6401e26 100644 --- a/drivers/gpu/drm/i915/gvt/mmio.h +++ b/drivers/gpu/drm/i915/gvt/mmio.h @@ -98,4 +98,6 @@ bool intel_gvt_in_force_nonpriv_whitelist(struct intel_gvt *gvt, int intel_vgpu_mmio_reg_rw(struct intel_vgpu *vgpu, unsigned int offset, void *pdata, unsigned int bytes, bool is_read); +int intel_vgpu_mask_mmio_write(struct intel_vgpu *vgpu, unsigned int offset, + void *p_data, unsigned int bytes); #endif diff --git a/drivers/gpu/drm/i915/gvt/mmio_context.c b/drivers/gpu/drm/i915/gvt/mmio_context.c index 0f949554d118..5ca9caf7552a 100644 --- a/drivers/gpu/drm/i915/gvt/mmio_context.c +++ b/drivers/gpu/drm/i915/gvt/mmio_context.c @@ -581,7 +581,9 @@ void intel_gvt_init_engine_mmio_context(struct intel_gvt *gvt) for (mmio = gvt->engine_mmio_list.mmio; i915_mmio_reg_valid(mmio->reg); mmio++) { - if (mmio->in_context) + if (mmio->in_context) { gvt->engine_mmio_list.ctx_mmio_count[mmio->ring_id]++; + intel_gvt_mmio_set_in_ctx(gvt, mmio->reg.reg); + } } } -- cgit v1.2.3 From 4d5d33a085335ef469c9a87792bcaaaa8e64d8c4 Mon Sep 17 00:00:00 2001 From: Taeung Song Date: Wed, 4 Jul 2018 22:36:36 +0900 Subject: samples/bpf: add missing This fixes build error regarding redefinition: CLANG-bpf samples/bpf/parse_varlen.o samples/bpf/parse_varlen.c:111:8: error: redefinition of 'vlan_hdr' struct vlan_hdr { ^ ./include/linux/if_vlan.h:38:8: note: previous definition is here So remove duplicate 'struct vlan_hdr' in sample code and include if_vlan.h Signed-off-by: Taeung Song Acked-by: David S. Miller Signed-off-by: Daniel Borkmann --- samples/bpf/parse_varlen.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/samples/bpf/parse_varlen.c b/samples/bpf/parse_varlen.c index 95c16324760c..0b6f22feb2c9 100644 --- a/samples/bpf/parse_varlen.c +++ b/samples/bpf/parse_varlen.c @@ -6,6 +6,7 @@ */ #define KBUILD_MODNAME "foo" #include +#include #include #include #include @@ -108,11 +109,6 @@ static int parse_ipv6(void *data, uint64_t nh_off, void *data_end) return 0; } -struct vlan_hdr { - uint16_t h_vlan_TCI; - uint16_t h_vlan_encapsulated_proto; -}; - SEC("varlen") int handle_ingress(struct __sk_buff *skb) { -- cgit v1.2.3 From 492b7e894587c151be681f86d4d1d086375f7b45 Mon Sep 17 00:00:00 2001 From: Taeung Song Date: Wed, 4 Jul 2018 22:36:37 +0900 Subject: samples/bpf: Check the result of system() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit To avoid the below build warning message, use new generate_load() checking the return value. ignoring return value of ‘system’, declared with attribute warn_unused_result And it also refactors the duplicate code of both test_perf_event_all_cpu() and test_perf_event_task() Cc: Teng Qin Signed-off-by: Taeung Song Acked-by: David S. Miller Signed-off-by: Daniel Borkmann --- samples/bpf/trace_event_user.c | 27 ++++++++++++++++++++++++--- 1 file changed, 24 insertions(+), 3 deletions(-) diff --git a/samples/bpf/trace_event_user.c b/samples/bpf/trace_event_user.c index 1fa1becfa641..d08046ab81f0 100644 --- a/samples/bpf/trace_event_user.c +++ b/samples/bpf/trace_event_user.c @@ -122,6 +122,16 @@ static void print_stacks(void) } } +static inline int generate_load(void) +{ + if (system("dd if=/dev/zero of=/dev/null count=5000k status=none") < 0) { + printf("failed to generate some load with dd: %s\n", strerror(errno)); + return -1; + } + + return 0; +} + static void test_perf_event_all_cpu(struct perf_event_attr *attr) { int nr_cpus = sysconf(_SC_NPROCESSORS_CONF); @@ -142,7 +152,11 @@ static void test_perf_event_all_cpu(struct perf_event_attr *attr) assert(ioctl(pmu_fd[i], PERF_EVENT_IOC_SET_BPF, prog_fd[0]) == 0); assert(ioctl(pmu_fd[i], PERF_EVENT_IOC_ENABLE) == 0); } - system("dd if=/dev/zero of=/dev/null count=5000k status=none"); + + if (generate_load() < 0) { + error = 1; + goto all_cpu_err; + } print_stacks(); all_cpu_err: for (i--; i >= 0; i--) { @@ -156,7 +170,7 @@ all_cpu_err: static void test_perf_event_task(struct perf_event_attr *attr) { - int pmu_fd; + int pmu_fd, error = 0; /* per task perf event, enable inherit so the "dd ..." command can be traced properly. * Enabling inherit will cause bpf_perf_prog_read_time helper failure. @@ -171,10 +185,17 @@ static void test_perf_event_task(struct perf_event_attr *attr) } assert(ioctl(pmu_fd, PERF_EVENT_IOC_SET_BPF, prog_fd[0]) == 0); assert(ioctl(pmu_fd, PERF_EVENT_IOC_ENABLE) == 0); - system("dd if=/dev/zero of=/dev/null count=5000k status=none"); + + if (generate_load() < 0) { + error = 1; + goto err; + } print_stacks(); +err: ioctl(pmu_fd, PERF_EVENT_IOC_DISABLE); close(pmu_fd); + if (error) + int_exit(0); } static void test_bpf_perf_event(void) -- cgit v1.2.3 From 02a2f000a3629274bfad60bfc4de9edec49e63e7 Mon Sep 17 00:00:00 2001 From: Taeung Song Date: Wed, 4 Jul 2018 22:36:38 +0900 Subject: samples/bpf: Check the error of write() and read() test_task_rename() and test_urandom_read() can be failed during write() and read(), So check the result of them. Reviewed-by: David Laight Signed-off-by: Taeung Song Acked-by: David S. Miller Signed-off-by: Daniel Borkmann --- samples/bpf/test_overhead_user.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-) diff --git a/samples/bpf/test_overhead_user.c b/samples/bpf/test_overhead_user.c index 6caf47afa635..9d6dcaa9db92 100644 --- a/samples/bpf/test_overhead_user.c +++ b/samples/bpf/test_overhead_user.c @@ -6,6 +6,7 @@ */ #define _GNU_SOURCE #include +#include #include #include #include @@ -44,8 +45,13 @@ static void test_task_rename(int cpu) exit(1); } start_time = time_get_ns(); - for (i = 0; i < MAX_CNT; i++) - write(fd, buf, sizeof(buf)); + for (i = 0; i < MAX_CNT; i++) { + if (write(fd, buf, sizeof(buf)) < 0) { + printf("task rename failed: %s\n", strerror(errno)); + close(fd); + return; + } + } printf("task_rename:%d: %lld events per sec\n", cpu, MAX_CNT * 1000000000ll / (time_get_ns() - start_time)); close(fd); @@ -63,8 +69,13 @@ static void test_urandom_read(int cpu) exit(1); } start_time = time_get_ns(); - for (i = 0; i < MAX_CNT; i++) - read(fd, buf, sizeof(buf)); + for (i = 0; i < MAX_CNT; i++) { + if (read(fd, buf, sizeof(buf)) < 0) { + printf("failed to read from /dev/urandom: %s\n", strerror(errno)); + close(fd); + return; + } + } printf("urandom_read:%d: %lld events per sec\n", cpu, MAX_CNT * 1000000000ll / (time_get_ns() - start_time)); close(fd); -- cgit v1.2.3 From c48424d993fafd1e04b228fbd46176f828233d82 Mon Sep 17 00:00:00 2001 From: Taeung Song Date: Wed, 4 Jul 2018 22:36:39 +0900 Subject: samples/bpf: add .gitignore file For untracked executables of samples/bpf, add this. Untracked files: (use "git add ..." to include in what will be committed) samples/bpf/cpustat samples/bpf/fds_example samples/bpf/lathist samples/bpf/load_sock_ops ... Signed-off-by: Taeung Song Acked-by: David S. Miller Signed-off-by: Daniel Borkmann --- samples/bpf/.gitignore | 49 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 49 insertions(+) create mode 100644 samples/bpf/.gitignore diff --git a/samples/bpf/.gitignore b/samples/bpf/.gitignore new file mode 100644 index 000000000000..8ae4940025f8 --- /dev/null +++ b/samples/bpf/.gitignore @@ -0,0 +1,49 @@ +cpustat +fds_example +lathist +load_sock_ops +lwt_len_hist +map_perf_test +offwaketime +per_socket_stats_example +sampleip +sock_example +sockex1 +sockex2 +sockex3 +spintest +syscall_nrs.h +syscall_tp +task_fd_query +tc_l2_redirect +test_cgrp2_array_pin +test_cgrp2_attach +test_cgrp2_attach2 +test_cgrp2_sock +test_cgrp2_sock2 +test_current_task_under_cgroup +test_lru_dist +test_map_in_map +test_overhead +test_probe_write_user +trace_event +trace_output +tracex1 +tracex2 +tracex3 +tracex4 +tracex5 +tracex6 +tracex7 +xdp1 +xdp2 +xdp_adjust_tail +xdp_fwd +xdp_monitor +xdp_redirect +xdp_redirect_cpu +xdp_redirect_map +xdp_router_ipv4 +xdp_rxq_info +xdp_tx_iptunnel +xdpsock -- cgit v1.2.3 From 987553894f0ce8c1d83578136603a89009f42d35 Mon Sep 17 00:00:00 2001 From: Greentime Hu Date: Thu, 5 Jul 2018 16:13:47 +0800 Subject: nds32: fix build error "relocation truncated to fit: R_NDS32_25_PCREL_RELA" when make allyesconfig It will cause a linking error because the jump assembly code were using j, however it may be not enough to jump to the destination. We have to change it with pseudo instruction b. In that way, assembler will generate a set of safe assembly codes to make sure the destination is able to jump. Toolchain: https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/8.1.0/x86_64-gcc-8.1.0-nolibc-nds32le-linux.tar.gz Command: PATH=/NOBACKUP/atcsqa06/greentime/os/toolchain-kernel.org/gcc-8.1.0-nolibc/nds32le-linux/bin:$PATH ARCH=nds32 CROSS_COMPILE=nds32le-linux- make allyesconfig PATH=/NOBACKUP/atcsqa06/greentime/os/toolchain-kernel.org/gcc-8.1.0-nolibc/nds32le-linux/bin:$PATH ARCH=nds32 CROSS_COMPILE=nds32le-linux- make -j8 MODPOST vmlinux.o WARNING: EXPORT symbol "copy_page" [vmlinux] version generation failed, symbol will not be versioned. WARNING: EXPORT symbol "clear_page" [vmlinux] version generation failed, symbol will not be versioned. nds32le-linux-ld: kernel/futex.o:(.fixup+0x4): relocation truncated to fit: R_NDS32_25_PCREL_RELA against `.text' nds32le-linux-ld: kernel/futex.o:(.fixup+0xaa): relocation truncated to fit: R_NDS32_25_PCREL_RELA against `.text' nds32le-linux-ld: kernel/futex.o:(.fixup+0xb0): relocation truncated to fit: R_NDS32_25_PCREL_RELA against `.text' nds32le-linux-ld: kernel/futex.o:(.fixup+0xb6): relocation truncated to fit: R_NDS32_25_PCREL_RELA against `.text' nds32le-linux-ld: kernel/futex.o:(.fixup+0xbc): relocation truncated to fit: R_NDS32_25_PCREL_RELA against `.text' nds32le-linux-ld: kernel/futex.o:(.fixup+0xc4): relocation truncated to fit: R_NDS32_25_PCREL_RELA against `.text' Makefile:1010: recipe for target 'vmlinux' failed make: *** [vmlinux] Error 1 Signed-off-by: Greentime Hu --- arch/nds32/include/asm/futex.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/nds32/include/asm/futex.h b/arch/nds32/include/asm/futex.h index eab5e84bd991..cb6cb91cfdf8 100644 --- a/arch/nds32/include/asm/futex.h +++ b/arch/nds32/include/asm/futex.h @@ -16,7 +16,7 @@ " .popsection\n" \ " .pushsection .fixup,\"ax\"\n" \ "4: move %0, " err_reg "\n" \ - " j 3b\n" \ + " b 3b\n" \ " .popsection" #define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg) \ -- cgit v1.2.3 From a6032120d341badd9b034cb64411e7089d8f4285 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 30 May 2018 23:47:09 +0200 Subject: ieee802154: mcr20a: add missing includes Without CONFIG_GPIOLIB, some headers are not included implicitly, leading to a build failure: drivers/net/ieee802154/mcr20a.c: In function 'mcr20a_probe': drivers/net/ieee802154/mcr20a.c:1347:13: error: implicit declaration of function 'irq_get_trigger_type'; did you mean 'irq_get_irqchip_state'? [-Werror=implicit-function-declaration] This includes gpio/consumer.h and irq.h directly rather through the gpiolib header. Fixes: 8c6ad9cc5157 ("ieee802154: Add NXP MCR20A IEEE 802.15.4 transceiver driver") Signed-off-by: Arnd Bergmann Acked-by: Xue Liu Signed-off-by: Stefan Schmidt --- drivers/net/ieee802154/mcr20a.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ieee802154/mcr20a.c b/drivers/net/ieee802154/mcr20a.c index de0d7f28a181..e428277781ac 100644 --- a/drivers/net/ieee802154/mcr20a.c +++ b/drivers/net/ieee802154/mcr20a.c @@ -15,10 +15,11 @@ */ #include #include -#include +#include #include #include #include +#include #include #include #include -- cgit v1.2.3 From b30c122c0bbb0a1dc413085e177ea09467e65fdb Mon Sep 17 00:00:00 2001 From: Lubomir Rintel Date: Mon, 2 Jul 2018 11:21:47 +0200 Subject: ieee802154: 6lowpan: set IFLA_LINK Otherwise NetworkManager (and iproute alike) is not able to identify the parent IEEE 802.15.4 interface of a 6LoWPAN link. Signed-off-by: Lubomir Rintel Acked-by: Alexander Aring Signed-off-by: Stefan Schmidt --- net/ieee802154/6lowpan/core.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/net/ieee802154/6lowpan/core.c b/net/ieee802154/6lowpan/core.c index 275449b0d633..3297e7fa9945 100644 --- a/net/ieee802154/6lowpan/core.c +++ b/net/ieee802154/6lowpan/core.c @@ -90,12 +90,18 @@ static int lowpan_neigh_construct(struct net_device *dev, struct neighbour *n) return 0; } +static int lowpan_get_iflink(const struct net_device *dev) +{ + return lowpan_802154_dev(dev)->wdev->ifindex; +} + static const struct net_device_ops lowpan_netdev_ops = { .ndo_init = lowpan_dev_init, .ndo_start_xmit = lowpan_xmit, .ndo_open = lowpan_open, .ndo_stop = lowpan_stop, .ndo_neigh_construct = lowpan_neigh_construct, + .ndo_get_iflink = lowpan_get_iflink, }; static void lowpan_setup(struct net_device *ldev) -- cgit v1.2.3 From d376bef9c29b3c65aeee4e785fffcd97ef0a9a81 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Wed, 4 Jul 2018 20:25:32 +0200 Subject: netfilter: x_tables: set module owner for icmp(6) matches nft_compat relies on xt_request_find_match to increment refcount of the module that provides the match/target. The (builtin) icmp matches did't set the module owner so it was possible to rmmod ip(6)tables while icmp extensions were still in use. Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/ipv4/netfilter/ip_tables.c | 1 + net/ipv6/netfilter/ip6_tables.c | 1 + 2 files changed, 2 insertions(+) diff --git a/net/ipv4/netfilter/ip_tables.c b/net/ipv4/netfilter/ip_tables.c index ca0dad90803a..e77872c93c20 100644 --- a/net/ipv4/netfilter/ip_tables.c +++ b/net/ipv4/netfilter/ip_tables.c @@ -1898,6 +1898,7 @@ static struct xt_match ipt_builtin_mt[] __read_mostly = { .checkentry = icmp_checkentry, .proto = IPPROTO_ICMP, .family = NFPROTO_IPV4, + .me = THIS_MODULE, }, }; diff --git a/net/ipv6/netfilter/ip6_tables.c b/net/ipv6/netfilter/ip6_tables.c index 7eab959734bc..daf2e9e9193d 100644 --- a/net/ipv6/netfilter/ip6_tables.c +++ b/net/ipv6/netfilter/ip6_tables.c @@ -1909,6 +1909,7 @@ static struct xt_match ip6t_builtin_mt[] __read_mostly = { .checkentry = icmp6_checkentry, .proto = IPPROTO_ICMPV6, .family = NFPROTO_IPV6, + .me = THIS_MODULE, }, }; -- cgit v1.2.3 From b999a7a9e72bd2d37b5d03772cedfc4dd45875bf Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Wed, 4 Jul 2018 09:18:33 -0500 Subject: ASoC: fsl_spdif: Use 64-bit arithmetic instead of 32-bit Add suffix ULL to constant 64 in order to give the compiler complete information about the proper arithmetic to use. Notice that such constant is used in a context that expects an expression of type u64 (64 bits, unsigned) and the following expression is currently being evaluated using 32-bit arithmetic: rate[index] * txclk_df * 64 Addresses-Coverity-ID: 1222129 ("Unintentional integer overflow") Signed-off-by: Gustavo A. R. Silva Acked-by: Nicolin Chen Signed-off-by: Mark Brown --- sound/soc/fsl/fsl_spdif.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/fsl/fsl_spdif.c b/sound/soc/fsl/fsl_spdif.c index 9b59d87b61bf..740b90df44bb 100644 --- a/sound/soc/fsl/fsl_spdif.c +++ b/sound/soc/fsl/fsl_spdif.c @@ -1118,7 +1118,7 @@ static u32 fsl_spdif_txclk_caldiv(struct fsl_spdif_priv *spdif_priv, for (sysclk_df = sysclk_dfmin; sysclk_df <= sysclk_dfmax; sysclk_df++) { for (txclk_df = 1; txclk_df <= 128; txclk_df++) { - rate_ideal = rate[index] * txclk_df * 64; + rate_ideal = rate[index] * txclk_df * 64ULL; if (round) rate_actual = clk_round_rate(clk, rate_ideal); else -- cgit v1.2.3 From 74b37e299f038c910dc728d736e3f071ba0ead2a Mon Sep 17 00:00:00 2001 From: Andrew Gabbasov Date: Thu, 5 Jul 2018 11:20:04 +0900 Subject: ASoC: rsnd: cmd: Add missing newline to debug message To comply with the style of all kernel messages, add newline to the end of every message. Fixes: 70fb10529f61 ("ASoC: rsnd: add MIX (Mixer) support") Signed-off-by: Andrew Gabbasov Signed-off-by: Jiada Wang Acked-by: Kuninori Morimoto Signed-off-by: Mark Brown --- sound/soc/sh/rcar/cmd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/sh/rcar/cmd.c b/sound/soc/sh/rcar/cmd.c index d8043ad33540..cc191cd5fb82 100644 --- a/sound/soc/sh/rcar/cmd.c +++ b/sound/soc/sh/rcar/cmd.c @@ -86,7 +86,7 @@ static int rsnd_cmd_init(struct rsnd_mod *mod, cmd_case[rsnd_mod_id(src)] << 16; } - dev_dbg(dev, "ctu/mix path = 0x%08x", data); + dev_dbg(dev, "ctu/mix path = 0x%08x\n", data); rsnd_mod_write(mod, CMD_ROUTE_SLCT, data); rsnd_mod_write(mod, CMD_BUSIF_MODE, rsnd_get_busif_shift(io, mod) | 1); -- cgit v1.2.3 From 90eb6b59d311e6facd040124cb5b659a865125b8 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Mon, 2 Jul 2018 17:11:00 +0200 Subject: ASoC: pxa-ssp: add support for an external clock in devicetree Allow setting a clock called 'extclk' in the device of the ssp-dai device. If specified, this clock will be set to the mclk rate from the DAI's .set_sysclk() callback. The DAI will also configure itself to use that external clock. Signed-off-by: Daniel Mack Signed-off-by: Mark Brown --- .../devicetree/bindings/sound/mrvl,pxa-ssp.txt | 8 +++++++ sound/soc/pxa/pxa-ssp.c | 25 ++++++++++++++++++++++ 2 files changed, 33 insertions(+) diff --git a/Documentation/devicetree/bindings/sound/mrvl,pxa-ssp.txt b/Documentation/devicetree/bindings/sound/mrvl,pxa-ssp.txt index 74c9ba6c2823..93b982e9419f 100644 --- a/Documentation/devicetree/bindings/sound/mrvl,pxa-ssp.txt +++ b/Documentation/devicetree/bindings/sound/mrvl,pxa-ssp.txt @@ -5,6 +5,14 @@ Required properties: compatible Must be "mrvl,pxa-ssp-dai" port A phandle reference to a PXA ssp upstream device +Optional properties: + + clock-names + clocks Through "clock-names" and "clocks", external clocks + can be configured. If a clock names "extclk" exists, + it will be set to the mclk rate of the audio stream + and be used as clock provider of the DAI. + Example: /* upstream device */ diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c index ff1e0bd8d407..69033e1a84e6 100644 --- a/sound/soc/pxa/pxa-ssp.c +++ b/sound/soc/pxa/pxa-ssp.c @@ -41,6 +41,7 @@ */ struct ssp_priv { struct ssp_device *ssp; + struct clk *extclk; unsigned long ssp_clk; unsigned int sysclk; unsigned int dai_fmt; @@ -205,6 +206,21 @@ static int pxa_ssp_set_dai_sysclk(struct snd_soc_dai *cpu_dai, u32 sscr0 = pxa_ssp_read_reg(ssp, SSCR0) & ~(SSCR0_ECS | SSCR0_NCS | SSCR0_MOD | SSCR0_ACS); + if (priv->extclk) { + int ret; + + /* + * For DT based boards, if an extclk is given, use it + * here and configure PXA_SSP_CLK_EXT. + */ + + ret = clk_set_rate(priv->extclk, freq); + if (ret < 0) + return ret; + + clk_id = PXA_SSP_CLK_EXT; + } + dev_dbg(&ssp->pdev->dev, "pxa_ssp_set_dai_sysclk id: %d, clk_id %d, freq %u\n", cpu_dai->id, clk_id, freq); @@ -774,6 +790,15 @@ static int pxa_ssp_probe(struct snd_soc_dai *dai) ret = -ENODEV; goto err_priv; } + + priv->extclk = devm_clk_get(dev, "extclk"); + if (IS_ERR(priv->extclk)) { + ret = PTR_ERR(priv->extclk); + if (ret == -EPROBE_DEFER) + return ret; + + priv->extclk = NULL; + } } else { priv->ssp = pxa_ssp_request(dai->id + 1, "SoC audio"); if (priv->ssp == NULL) { -- cgit v1.2.3 From 0df8adbb88db8283f102a2afa91610a502245cb2 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 4 Jul 2018 12:52:36 +0300 Subject: qed: off by one in qed_parse_mcp_trace_buf() If format_idx == s_mcp_trace_meta.formats_num then we read one element beyond the end of the s_mcp_trace_meta.formats[] array. Fixes: 50bc60cb155c ("qed*: Utilize FW 8.33.11.0") Signed-off-by: Dan Carpenter Acked-by: Tomer Tayar Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_debug.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_debug.c b/drivers/net/ethernet/qlogic/qed/qed_debug.c index a14e48489029..4340c4c90bcb 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_debug.c +++ b/drivers/net/ethernet/qlogic/qed/qed_debug.c @@ -6723,7 +6723,7 @@ static enum dbg_status qed_parse_mcp_trace_buf(u8 *trace_buf, format_idx = header & MFW_TRACE_EVENTID_MASK; /* Skip message if its index doesn't exist in the meta data */ - if (format_idx > s_mcp_trace_meta.formats_num) { + if (format_idx >= s_mcp_trace_meta.formats_num) { u8 format_size = (u8)((header & MFW_TRACE_PRM_SIZE_MASK) >> MFW_TRACE_PRM_SIZE_SHIFT); -- cgit v1.2.3 From a9ba23d48dbc6ffd08426bb10f05720e0b9f5c14 Mon Sep 17 00:00:00 2001 From: Paul Moore Date: Wed, 4 Jul 2018 09:58:05 -0400 Subject: ipv6: make ipv6_renew_options() interrupt/kernel safe At present the ipv6_renew_options_kern() function ends up calling into access_ok() which is problematic if done from inside an interrupt as access_ok() calls WARN_ON_IN_IRQ() on some (all?) architectures (x86-64 is affected). Example warning/backtrace is shown below: WARNING: CPU: 1 PID: 3144 at lib/usercopy.c:11 _copy_from_user+0x85/0x90 ... Call Trace: ipv6_renew_option+0xb2/0xf0 ipv6_renew_options+0x26a/0x340 ipv6_renew_options_kern+0x2c/0x40 calipso_req_setattr+0x72/0xe0 netlbl_req_setattr+0x126/0x1b0 selinux_netlbl_inet_conn_request+0x80/0x100 selinux_inet_conn_request+0x6d/0xb0 security_inet_conn_request+0x32/0x50 tcp_conn_request+0x35f/0xe00 ? __lock_acquire+0x250/0x16c0 ? selinux_socket_sock_rcv_skb+0x1ae/0x210 ? tcp_rcv_state_process+0x289/0x106b tcp_rcv_state_process+0x289/0x106b ? tcp_v6_do_rcv+0x1a7/0x3c0 tcp_v6_do_rcv+0x1a7/0x3c0 tcp_v6_rcv+0xc82/0xcf0 ip6_input_finish+0x10d/0x690 ip6_input+0x45/0x1e0 ? ip6_rcv_finish+0x1d0/0x1d0 ipv6_rcv+0x32b/0x880 ? ip6_make_skb+0x1e0/0x1e0 __netif_receive_skb_core+0x6f2/0xdf0 ? process_backlog+0x85/0x250 ? process_backlog+0x85/0x250 ? process_backlog+0xec/0x250 process_backlog+0xec/0x250 net_rx_action+0x153/0x480 __do_softirq+0xd9/0x4f7 do_softirq_own_stack+0x2a/0x40 ... While not present in the backtrace, ipv6_renew_option() ends up calling access_ok() via the following chain: access_ok() _copy_from_user() copy_from_user() ipv6_renew_option() The fix presented in this patch is to perform the userspace copy earlier in the call chain such that it is only called when the option data is actually coming from userspace; that place is do_ipv6_setsockopt(). Not only does this solve the problem seen in the backtrace above, it also allows us to simplify the code quite a bit by removing ipv6_renew_options_kern() completely. We also take this opportunity to cleanup ipv6_renew_options()/ipv6_renew_option() a small amount as well. This patch is heavily based on a rough patch by Al Viro. I've taken his original patch, converted a kmemdup() call in do_ipv6_setsockopt() to a memdup_user() call, made better use of the e_inval jump target in the same function, and cleaned up the use ipv6_renew_option() by ipv6_renew_options(). CC: Al Viro Signed-off-by: Paul Moore Signed-off-by: David S. Miller --- include/net/ipv6.h | 9 +--- net/ipv6/calipso.c | 9 ++-- net/ipv6/exthdrs.c | 111 +++++++++++++---------------------------------- net/ipv6/ipv6_sockglue.c | 27 ++++++++---- 4 files changed, 53 insertions(+), 103 deletions(-) diff --git a/include/net/ipv6.h b/include/net/ipv6.h index 16475c269749..d02881e4ad1f 100644 --- a/include/net/ipv6.h +++ b/include/net/ipv6.h @@ -355,14 +355,7 @@ struct ipv6_txoptions *ipv6_dup_options(struct sock *sk, struct ipv6_txoptions *ipv6_renew_options(struct sock *sk, struct ipv6_txoptions *opt, int newtype, - struct ipv6_opt_hdr __user *newopt, - int newoptlen); -struct ipv6_txoptions * -ipv6_renew_options_kern(struct sock *sk, - struct ipv6_txoptions *opt, - int newtype, - struct ipv6_opt_hdr *newopt, - int newoptlen); + struct ipv6_opt_hdr *newopt); struct ipv6_txoptions *ipv6_fixup_options(struct ipv6_txoptions *opt_space, struct ipv6_txoptions *opt); diff --git a/net/ipv6/calipso.c b/net/ipv6/calipso.c index 1323b9679cf7..1c0bb9fb76e6 100644 --- a/net/ipv6/calipso.c +++ b/net/ipv6/calipso.c @@ -799,8 +799,7 @@ static int calipso_opt_update(struct sock *sk, struct ipv6_opt_hdr *hop) { struct ipv6_txoptions *old = txopt_get(inet6_sk(sk)), *txopts; - txopts = ipv6_renew_options_kern(sk, old, IPV6_HOPOPTS, - hop, hop ? ipv6_optlen(hop) : 0); + txopts = ipv6_renew_options(sk, old, IPV6_HOPOPTS, hop); txopt_put(old); if (IS_ERR(txopts)) return PTR_ERR(txopts); @@ -1222,8 +1221,7 @@ static int calipso_req_setattr(struct request_sock *req, if (IS_ERR(new)) return PTR_ERR(new); - txopts = ipv6_renew_options_kern(sk, req_inet->ipv6_opt, IPV6_HOPOPTS, - new, new ? ipv6_optlen(new) : 0); + txopts = ipv6_renew_options(sk, req_inet->ipv6_opt, IPV6_HOPOPTS, new); kfree(new); @@ -1260,8 +1258,7 @@ static void calipso_req_delattr(struct request_sock *req) if (calipso_opt_del(req_inet->ipv6_opt->hopopt, &new)) return; /* Nothing to do */ - txopts = ipv6_renew_options_kern(sk, req_inet->ipv6_opt, IPV6_HOPOPTS, - new, new ? ipv6_optlen(new) : 0); + txopts = ipv6_renew_options(sk, req_inet->ipv6_opt, IPV6_HOPOPTS, new); if (!IS_ERR(txopts)) { txopts = xchg(&req_inet->ipv6_opt, txopts); diff --git a/net/ipv6/exthdrs.c b/net/ipv6/exthdrs.c index 5bc2bf3733ab..20291c2036fc 100644 --- a/net/ipv6/exthdrs.c +++ b/net/ipv6/exthdrs.c @@ -1015,29 +1015,21 @@ ipv6_dup_options(struct sock *sk, struct ipv6_txoptions *opt) } EXPORT_SYMBOL_GPL(ipv6_dup_options); -static int ipv6_renew_option(void *ohdr, - struct ipv6_opt_hdr __user *newopt, int newoptlen, - int inherit, - struct ipv6_opt_hdr **hdr, - char **p) +static void ipv6_renew_option(int renewtype, + struct ipv6_opt_hdr **dest, + struct ipv6_opt_hdr *old, + struct ipv6_opt_hdr *new, + int newtype, char **p) { - if (inherit) { - if (ohdr) { - memcpy(*p, ohdr, ipv6_optlen((struct ipv6_opt_hdr *)ohdr)); - *hdr = (struct ipv6_opt_hdr *)*p; - *p += CMSG_ALIGN(ipv6_optlen(*hdr)); - } - } else { - if (newopt) { - if (copy_from_user(*p, newopt, newoptlen)) - return -EFAULT; - *hdr = (struct ipv6_opt_hdr *)*p; - if (ipv6_optlen(*hdr) > newoptlen) - return -EINVAL; - *p += CMSG_ALIGN(newoptlen); - } - } - return 0; + struct ipv6_opt_hdr *src; + + src = (renewtype == newtype ? new : old); + if (!src) + return; + + memcpy(*p, src, ipv6_optlen(src)); + *dest = (struct ipv6_opt_hdr *)*p; + *p += CMSG_ALIGN(ipv6_optlen(*dest)); } /** @@ -1063,13 +1055,11 @@ static int ipv6_renew_option(void *ohdr, */ struct ipv6_txoptions * ipv6_renew_options(struct sock *sk, struct ipv6_txoptions *opt, - int newtype, - struct ipv6_opt_hdr __user *newopt, int newoptlen) + int newtype, struct ipv6_opt_hdr *newopt) { int tot_len = 0; char *p; struct ipv6_txoptions *opt2; - int err; if (opt) { if (newtype != IPV6_HOPOPTS && opt->hopopt) @@ -1082,8 +1072,8 @@ ipv6_renew_options(struct sock *sk, struct ipv6_txoptions *opt, tot_len += CMSG_ALIGN(ipv6_optlen(opt->dst1opt)); } - if (newopt && newoptlen) - tot_len += CMSG_ALIGN(newoptlen); + if (newopt) + tot_len += CMSG_ALIGN(ipv6_optlen(newopt)); if (!tot_len) return NULL; @@ -1098,29 +1088,19 @@ ipv6_renew_options(struct sock *sk, struct ipv6_txoptions *opt, opt2->tot_len = tot_len; p = (char *)(opt2 + 1); - err = ipv6_renew_option(opt ? opt->hopopt : NULL, newopt, newoptlen, - newtype != IPV6_HOPOPTS, - &opt2->hopopt, &p); - if (err) - goto out; - - err = ipv6_renew_option(opt ? opt->dst0opt : NULL, newopt, newoptlen, - newtype != IPV6_RTHDRDSTOPTS, - &opt2->dst0opt, &p); - if (err) - goto out; - - err = ipv6_renew_option(opt ? opt->srcrt : NULL, newopt, newoptlen, - newtype != IPV6_RTHDR, - (struct ipv6_opt_hdr **)&opt2->srcrt, &p); - if (err) - goto out; - - err = ipv6_renew_option(opt ? opt->dst1opt : NULL, newopt, newoptlen, - newtype != IPV6_DSTOPTS, - &opt2->dst1opt, &p); - if (err) - goto out; + ipv6_renew_option(IPV6_HOPOPTS, &opt2->hopopt, + (opt ? opt->hopopt : NULL), + newopt, newtype, &p); + ipv6_renew_option(IPV6_RTHDRDSTOPTS, &opt2->dst0opt, + (opt ? opt->dst0opt : NULL), + newopt, newtype, &p); + ipv6_renew_option(IPV6_RTHDR, + (struct ipv6_opt_hdr **)&opt2->srcrt, + (opt ? (struct ipv6_opt_hdr *)opt->srcrt : NULL), + newopt, newtype, &p); + ipv6_renew_option(IPV6_DSTOPTS, &opt2->dst1opt, + (opt ? opt->dst1opt : NULL), + newopt, newtype, &p); opt2->opt_nflen = (opt2->hopopt ? ipv6_optlen(opt2->hopopt) : 0) + (opt2->dst0opt ? ipv6_optlen(opt2->dst0opt) : 0) + @@ -1128,37 +1108,6 @@ ipv6_renew_options(struct sock *sk, struct ipv6_txoptions *opt, opt2->opt_flen = (opt2->dst1opt ? ipv6_optlen(opt2->dst1opt) : 0); return opt2; -out: - sock_kfree_s(sk, opt2, opt2->tot_len); - return ERR_PTR(err); -} - -/** - * ipv6_renew_options_kern - replace a specific ext hdr with a new one. - * - * @sk: sock from which to allocate memory - * @opt: original options - * @newtype: option type to replace in @opt - * @newopt: new option of type @newtype to replace (kernel-mem) - * @newoptlen: length of @newopt - * - * See ipv6_renew_options(). The difference is that @newopt is - * kernel memory, rather than user memory. - */ -struct ipv6_txoptions * -ipv6_renew_options_kern(struct sock *sk, struct ipv6_txoptions *opt, - int newtype, struct ipv6_opt_hdr *newopt, - int newoptlen) -{ - struct ipv6_txoptions *ret_val; - const mm_segment_t old_fs = get_fs(); - - set_fs(KERNEL_DS); - ret_val = ipv6_renew_options(sk, opt, newtype, - (struct ipv6_opt_hdr __user *)newopt, - newoptlen); - set_fs(old_fs); - return ret_val; } struct ipv6_txoptions *ipv6_fixup_options(struct ipv6_txoptions *opt_space, diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c index 4d780c7f0130..c95c3486d904 100644 --- a/net/ipv6/ipv6_sockglue.c +++ b/net/ipv6/ipv6_sockglue.c @@ -398,6 +398,12 @@ static int do_ipv6_setsockopt(struct sock *sk, int level, int optname, case IPV6_DSTOPTS: { struct ipv6_txoptions *opt; + struct ipv6_opt_hdr *new = NULL; + + /* hop-by-hop / destination options are privileged option */ + retv = -EPERM; + if (optname != IPV6_RTHDR && !ns_capable(net->user_ns, CAP_NET_RAW)) + break; /* remove any sticky options header with a zero option * length, per RFC3542. @@ -409,17 +415,22 @@ static int do_ipv6_setsockopt(struct sock *sk, int level, int optname, else if (optlen < sizeof(struct ipv6_opt_hdr) || optlen & 0x7 || optlen > 8 * 255) goto e_inval; - - /* hop-by-hop / destination options are privileged option */ - retv = -EPERM; - if (optname != IPV6_RTHDR && !ns_capable(net->user_ns, CAP_NET_RAW)) - break; + else { + new = memdup_user(optval, optlen); + if (IS_ERR(new)) { + retv = PTR_ERR(new); + break; + } + if (unlikely(ipv6_optlen(new) > optlen)) { + kfree(new); + goto e_inval; + } + } opt = rcu_dereference_protected(np->opt, lockdep_sock_is_held(sk)); - opt = ipv6_renew_options(sk, opt, optname, - (struct ipv6_opt_hdr __user *)optval, - optlen); + opt = ipv6_renew_options(sk, opt, optname, new); + kfree(new); if (IS_ERR(opt)) { retv = PTR_ERR(opt); break; -- cgit v1.2.3 From fdf5fd3975666804118e62c69de25dc85cc0909c Mon Sep 17 00:00:00 2001 From: Arun Kumar Neelakantam Date: Wed, 4 Jul 2018 19:49:32 +0530 Subject: net: qrtr: Broadcast messages only from control port The broadcast node id should only be sent with the control port id. Signed-off-by: Arun Kumar Neelakantam Signed-off-by: David S. Miller --- net/qrtr/qrtr.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/qrtr/qrtr.c b/net/qrtr/qrtr.c index 2aa07b547b16..7ffc9a3a7dd4 100644 --- a/net/qrtr/qrtr.c +++ b/net/qrtr/qrtr.c @@ -764,6 +764,10 @@ static int qrtr_sendmsg(struct socket *sock, struct msghdr *msg, size_t len) node = NULL; if (addr->sq_node == QRTR_NODE_BCAST) { enqueue_fn = qrtr_bcast_enqueue; + if (addr->sq_port != QRTR_PORT_CTRL) { + release_sock(sk); + return -ENOTCONN; + } } else if (addr->sq_node == ipc->us.sq_node) { enqueue_fn = qrtr_local_enqueue; } else { -- cgit v1.2.3 From d27e77a3de2866b0a772803fd03cd667b5ff8a9a Mon Sep 17 00:00:00 2001 From: Arun Kumar Neelakantam Date: Wed, 4 Jul 2018 19:49:33 +0530 Subject: net: qrtr: Reset the node and port ID of broadcast messages All the control messages broadcast to remote routers are using QRTR_NODE_BCAST instead of using local router NODE ID which cause the packets to be dropped on remote router due to invalid NODE ID. Signed-off-by: Arun Kumar Neelakantam Signed-off-by: David S. Miller --- net/qrtr/qrtr.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/net/qrtr/qrtr.c b/net/qrtr/qrtr.c index 7ffc9a3a7dd4..86e1e37eb4e8 100644 --- a/net/qrtr/qrtr.c +++ b/net/qrtr/qrtr.c @@ -191,8 +191,13 @@ static int qrtr_node_enqueue(struct qrtr_node *node, struct sk_buff *skb, hdr->type = cpu_to_le32(type); hdr->src_node_id = cpu_to_le32(from->sq_node); hdr->src_port_id = cpu_to_le32(from->sq_port); - hdr->dst_node_id = cpu_to_le32(to->sq_node); - hdr->dst_port_id = cpu_to_le32(to->sq_port); + if (to->sq_port == QRTR_PORT_CTRL) { + hdr->dst_node_id = cpu_to_le32(node->nid); + hdr->dst_port_id = cpu_to_le32(QRTR_NODE_BCAST); + } else { + hdr->dst_node_id = cpu_to_le32(to->sq_node); + hdr->dst_port_id = cpu_to_le32(to->sq_port); + } hdr->size = cpu_to_le32(len); hdr->confirm_rx = 0; -- cgit v1.2.3 From 38cd58ed9c4e389799b507bcffe02a7a7a180b33 Mon Sep 17 00:00:00 2001 From: Matevz Vucnik Date: Wed, 4 Jul 2018 18:12:48 +0200 Subject: qmi_wwan: add support for Quectel EG91 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This adds the USB id of LTE modem Quectel EG91. It requires the same quirk as other Quectel modems to make it work. Signed-off-by: Matevz Vucnik Acked-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 8fac8e132c5b..38502809420b 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -1253,6 +1253,7 @@ static const struct usb_device_id products[] = { {QMI_QUIRK_SET_DTR(0x1e0e, 0x9001, 5)}, /* SIMCom 7100E, 7230E, 7600E ++ */ {QMI_QUIRK_SET_DTR(0x2c7c, 0x0125, 4)}, /* Quectel EC25, EC20 R2.0 Mini PCIe */ {QMI_QUIRK_SET_DTR(0x2c7c, 0x0121, 4)}, /* Quectel EC21 Mini PCIe */ + {QMI_QUIRK_SET_DTR(0x2c7c, 0x0191, 4)}, /* Quectel EG91 */ {QMI_FIXED_INTF(0x2c7c, 0x0296, 4)}, /* Quectel BG96 */ {QMI_QUIRK_SET_DTR(0x2c7c, 0x0306, 4)}, /* Quectel EP06 Mini PCIe */ -- cgit v1.2.3 From f7ddff54d0a0f068442414b48bec7f22aa777de7 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Thu, 5 Jul 2018 08:06:17 -0500 Subject: ASoC: nau8824: use 64-bit arithmetic instead of 32-bit Add suffix ULL to constant 256 in order to give the compiler complete information about the proper arithmetic to use. Notice that such constant is used in a context that expects an expression of type u64 (64 bits, unsigned) and the following expression is currently being evaluated using 32-bit arithmetic: 256 * fs * 2 * mclk_src_scaling[i].param Addresses-Coverity-ID: 1432039 ("Unintentional integer overflow") Signed-off-by: Gustavo A. R. Silva Signed-off-by: Mark Brown --- sound/soc/codecs/nau8824.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/nau8824.c b/sound/soc/codecs/nau8824.c index 6bd14453f06e..468d5143e2c4 100644 --- a/sound/soc/codecs/nau8824.c +++ b/sound/soc/codecs/nau8824.c @@ -1274,7 +1274,7 @@ static int nau8824_calc_fll_param(unsigned int fll_in, fvco_max = 0; fvco_sel = ARRAY_SIZE(mclk_src_scaling); for (i = 0; i < ARRAY_SIZE(mclk_src_scaling); i++) { - fvco = 256 * fs * 2 * mclk_src_scaling[i].param; + fvco = 256ULL * fs * 2 * mclk_src_scaling[i].param; if (fvco > NAU_FVCO_MIN && fvco < NAU_FVCO_MAX && fvco_max < fvco) { fvco_max = fvco; -- cgit v1.2.3 From 7481a8576ad87ac92526a931c0cd5733db7c1250 Mon Sep 17 00:00:00 2001 From: Nicholas Mc Guire Date: Mon, 2 Jul 2018 20:13:15 +0200 Subject: liquidio: make timeout HZ independent and readable schedule_timeout_* takes a timeout in jiffies but the code currently is passing in a constant which makes this timeout HZ dependent. So define a constant with (hopefully) meaningful name and pass it through msecs_to_jiffies() to fix the HZ dependency. Signed-off-by: Nicholas Mc Guire commit f21fb3ed364b ("Add support of Cavium Liquidio ethernet adapters") Acked-by: Derek Chickles Signed-off-by: David S. Miller --- drivers/net/ethernet/cavium/liquidio/lio_main.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/cavium/liquidio/lio_main.c b/drivers/net/ethernet/cavium/liquidio/lio_main.c index 8a815bb57177..7e8454d3b1ad 100644 --- a/drivers/net/ethernet/cavium/liquidio/lio_main.c +++ b/drivers/net/ethernet/cavium/liquidio/lio_main.c @@ -91,6 +91,9 @@ static int octeon_console_debug_enabled(u32 console) */ #define LIO_SYNC_OCTEON_TIME_INTERVAL_MS 60000 +/* time to wait for possible in-flight requests in milliseconds */ +#define WAIT_INFLIGHT_REQUEST msecs_to_jiffies(1000) + struct lio_trusted_vf_ctx { struct completion complete; int status; @@ -259,7 +262,7 @@ static inline void pcierror_quiesce_device(struct octeon_device *oct) force_io_queues_off(oct); /* To allow for in-flight requests */ - schedule_timeout_uninterruptible(100); + schedule_timeout_uninterruptible(WAIT_INFLIGHT_REQUEST); if (wait_for_pending_requests(oct)) dev_err(&oct->pci_dev->dev, "There were pending requests\n"); -- cgit v1.2.3 From 96f1206d10c63df64260be94536474a1b904f356 Mon Sep 17 00:00:00 2001 From: Stefan Schmidt Date: Thu, 5 Jul 2018 13:56:44 +0200 Subject: MAINTAINERS: update my email address The mail server hosting the old address is going to fade out. Time to update to an address I control directly. Signed-off-by: Stefan Schmidt Signed-off-by: David S. Miller --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 34738d054f8d..0bf83d50aaba 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2523,7 +2523,7 @@ S: Supported F: drivers/scsi/esas2r ATUSB IEEE 802.15.4 RADIO DRIVER -M: Stefan Schmidt +M: Stefan Schmidt L: linux-wpan@vger.kernel.org S: Maintained F: drivers/net/ieee802154/atusb.c @@ -6908,7 +6908,7 @@ F: drivers/clk/clk-versaclock5.c IEEE 802.15.4 SUBSYSTEM M: Alexander Aring -M: Stefan Schmidt +M: Stefan Schmidt L: linux-wpan@vger.kernel.org W: http://wpan.cakelab.org/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan.git -- cgit v1.2.3 From 94b3b542303f3055c326df74ef144a8a790d7d7f Mon Sep 17 00:00:00 2001 From: Igor Russkikh Date: Thu, 5 Jul 2018 17:01:09 +0300 Subject: net: aquantia: vlan unicast address list correct handling Setting up macvlan/macvtap networks over atlantic NIC results in no traffic over these networks because ndo_set_rx_mode did not listed UC MACs as registered in unicast filter. Here we fix that taking into account maximum number of UC filters supported by hardware. If more than MAX addresses were registered, we just enable promisc and/or allmulti to pass the traffic in. We also remove MULTICAST_ADDRESS_MAX constant from aq_cfg since thats not a configurable parameter at all. Fixes: b21f502 ("net:ethernet:aquantia: Fix for multicast filter handling.") Signed-off-by: Igor Russkikh Signed-off-by: David S. Miller --- drivers/net/ethernet/aquantia/atlantic/aq_cfg.h | 2 - drivers/net/ethernet/aquantia/atlantic/aq_hw.h | 4 +- drivers/net/ethernet/aquantia/atlantic/aq_main.c | 11 +---- drivers/net/ethernet/aquantia/atlantic/aq_nic.c | 47 +++++++++++++--------- drivers/net/ethernet/aquantia/atlantic/aq_nic.h | 2 +- .../ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c | 2 +- .../ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c | 4 +- 7 files changed, 36 insertions(+), 36 deletions(-) diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_cfg.h b/drivers/net/ethernet/aquantia/atlantic/aq_cfg.h index fc7383106946..91eb8910b1c9 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_cfg.h +++ b/drivers/net/ethernet/aquantia/atlantic/aq_cfg.h @@ -63,8 +63,6 @@ #define AQ_CFG_NAPI_WEIGHT 64U -#define AQ_CFG_MULTICAST_ADDRESS_MAX 32U - /*#define AQ_CFG_MAC_ADDR_PERMANENT {0x30, 0x0E, 0xE3, 0x12, 0x34, 0x56}*/ #define AQ_NIC_FC_OFF 0U diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_hw.h b/drivers/net/ethernet/aquantia/atlantic/aq_hw.h index a2d416b24ffc..2c6ebd91a9f2 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_hw.h +++ b/drivers/net/ethernet/aquantia/atlantic/aq_hw.h @@ -98,6 +98,8 @@ struct aq_stats_s { #define AQ_HW_MEDIA_TYPE_TP 1U #define AQ_HW_MEDIA_TYPE_FIBRE 2U +#define AQ_HW_MULTICAST_ADDRESS_MAX 32U + struct aq_hw_s { atomic_t flags; u8 rbl_enabled:1; @@ -177,7 +179,7 @@ struct aq_hw_ops { unsigned int packet_filter); int (*hw_multicast_list_set)(struct aq_hw_s *self, - u8 ar_mac[AQ_CFG_MULTICAST_ADDRESS_MAX] + u8 ar_mac[AQ_HW_MULTICAST_ADDRESS_MAX] [ETH_ALEN], u32 count); diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_main.c b/drivers/net/ethernet/aquantia/atlantic/aq_main.c index ba5fe8c4125d..e3ae29e523f0 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_main.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_main.c @@ -135,17 +135,10 @@ err_exit: static void aq_ndev_set_multicast_settings(struct net_device *ndev) { struct aq_nic_s *aq_nic = netdev_priv(ndev); - int err = 0; - err = aq_nic_set_packet_filter(aq_nic, ndev->flags); - if (err < 0) - return; + aq_nic_set_packet_filter(aq_nic, ndev->flags); - if (netdev_mc_count(ndev)) { - err = aq_nic_set_multicast_list(aq_nic, ndev); - if (err < 0) - return; - } + aq_nic_set_multicast_list(aq_nic, ndev); } static const struct net_device_ops aq_ndev_ops = { diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c index 1a1a6380c128..7a22d0257e04 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c +++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c @@ -563,34 +563,41 @@ err_exit: int aq_nic_set_multicast_list(struct aq_nic_s *self, struct net_device *ndev) { + unsigned int packet_filter = self->packet_filter; struct netdev_hw_addr *ha = NULL; unsigned int i = 0U; - self->mc_list.count = 0U; - - netdev_for_each_mc_addr(ha, ndev) { - ether_addr_copy(self->mc_list.ar[i++], ha->addr); - ++self->mc_list.count; + self->mc_list.count = 0; + if (netdev_uc_count(ndev) > AQ_HW_MULTICAST_ADDRESS_MAX) { + packet_filter |= IFF_PROMISC; + } else { + netdev_for_each_uc_addr(ha, ndev) { + ether_addr_copy(self->mc_list.ar[i++], ha->addr); - if (i >= AQ_CFG_MULTICAST_ADDRESS_MAX) - break; + if (i >= AQ_HW_MULTICAST_ADDRESS_MAX) + break; + } } - if (i >= AQ_CFG_MULTICAST_ADDRESS_MAX) { - /* Number of filters is too big: atlantic does not support this. - * Force all multi filter to support this. - * With this we disable all UC filters and setup "all pass" - * multicast mask - */ - self->packet_filter |= IFF_ALLMULTI; - self->aq_nic_cfg.mc_list_count = 0; - return self->aq_hw_ops->hw_packet_filter_set(self->aq_hw, - self->packet_filter); + if (i + netdev_mc_count(ndev) > AQ_HW_MULTICAST_ADDRESS_MAX) { + packet_filter |= IFF_ALLMULTI; } else { - return self->aq_hw_ops->hw_multicast_list_set(self->aq_hw, - self->mc_list.ar, - self->mc_list.count); + netdev_for_each_mc_addr(ha, ndev) { + ether_addr_copy(self->mc_list.ar[i++], ha->addr); + + if (i >= AQ_HW_MULTICAST_ADDRESS_MAX) + break; + } + } + + if (i > 0 && i < AQ_HW_MULTICAST_ADDRESS_MAX) { + packet_filter |= IFF_MULTICAST; + self->mc_list.count = i; + self->aq_hw_ops->hw_multicast_list_set(self->aq_hw, + self->mc_list.ar, + self->mc_list.count); } + return aq_nic_set_packet_filter(self, packet_filter); } int aq_nic_set_mtu(struct aq_nic_s *self, int new_mtu) diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_nic.h b/drivers/net/ethernet/aquantia/atlantic/aq_nic.h index faa533a0ec47..fecfc401f95d 100644 --- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.h +++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.h @@ -75,7 +75,7 @@ struct aq_nic_s { struct aq_hw_link_status_s link_status; struct { u32 count; - u8 ar[AQ_CFG_MULTICAST_ADDRESS_MAX][ETH_ALEN]; + u8 ar[AQ_HW_MULTICAST_ADDRESS_MAX][ETH_ALEN]; } mc_list; struct pci_dev *pdev; diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c index 67e2f9fb9402..8cc6abadc03b 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_a0.c @@ -765,7 +765,7 @@ static int hw_atl_a0_hw_packet_filter_set(struct aq_hw_s *self, static int hw_atl_a0_hw_multicast_list_set(struct aq_hw_s *self, u8 ar_mac - [AQ_CFG_MULTICAST_ADDRESS_MAX] + [AQ_HW_MULTICAST_ADDRESS_MAX] [ETH_ALEN], u32 count) { diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c index 819f6bcf9b4e..956860a69797 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c @@ -784,7 +784,7 @@ static int hw_atl_b0_hw_packet_filter_set(struct aq_hw_s *self, static int hw_atl_b0_hw_multicast_list_set(struct aq_hw_s *self, u8 ar_mac - [AQ_CFG_MULTICAST_ADDRESS_MAX] + [AQ_HW_MULTICAST_ADDRESS_MAX] [ETH_ALEN], u32 count) { @@ -812,7 +812,7 @@ static int hw_atl_b0_hw_multicast_list_set(struct aq_hw_s *self, hw_atl_rpfl2_uc_flr_en_set(self, (self->aq_nic_cfg->is_mc_list_enabled), - HW_ATL_B0_MAC_MIN + i); + HW_ATL_B0_MAC_MIN + i); } err = aq_hw_err_from_flags(self); -- cgit v1.2.3 From 70ba5b6db96ff7324b8cfc87e0d0383cf59c9677 Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Thu, 5 Jul 2018 18:49:23 +0000 Subject: ipv4: Return EINVAL when ping_group_range sysctl doesn't map to user ns The low and high values of the net.ipv4.ping_group_range sysctl were being silently forced to the default disabled state when a write to the sysctl contained GIDs that didn't map to the associated user namespace. Confusingly, the sysctl's write operation would return success and then a subsequent read of the sysctl would indicate that the low and high values are the overflowgid. This patch changes the behavior by clearly returning an error when the sysctl write operation receives a GID range that doesn't map to the associated user namespace. In such a situation, the previous value of the sysctl is preserved and that range will be returned in a subsequent read of the sysctl. Signed-off-by: Tyler Hicks Signed-off-by: David S. Miller --- net/ipv4/sysctl_net_ipv4.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/net/ipv4/sysctl_net_ipv4.c b/net/ipv4/sysctl_net_ipv4.c index af0a857d8352..5fa335fd3852 100644 --- a/net/ipv4/sysctl_net_ipv4.c +++ b/net/ipv4/sysctl_net_ipv4.c @@ -189,8 +189,9 @@ static int ipv4_ping_group_range(struct ctl_table *table, int write, if (write && ret == 0) { low = make_kgid(user_ns, urange[0]); high = make_kgid(user_ns, urange[1]); - if (!gid_valid(low) || !gid_valid(high) || - (urange[1] < urange[0]) || gid_lt(high, low)) { + if (!gid_valid(low) || !gid_valid(high)) + return -EINVAL; + if (urange[1] < urange[0] || gid_lt(high, low)) { low = make_kgid(&init_user_ns, 1); high = make_kgid(&init_user_ns, 0); } -- cgit v1.2.3 From 5711b4e89319c2912f20b2a4f371c1525fc9551d Mon Sep 17 00:00:00 2001 From: Máté Eckl Date: Thu, 5 Jul 2018 12:01:53 +0200 Subject: netfilter: nf_tproxy: fix possible non-linear access to transport header MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch fixes a silent out-of-bound read possibility that was present because of the misuse of this function. Mostly it was called with a struct udphdr *hp which had only the udphdr part linearized by the skb_header_pointer, however nf_tproxy_get_sock_v{4,6} uses it as a tcphdr pointer, so some reads for tcp specific attributes may be invalid. Fixes: a583636a83ea ("inet: refactor inet[6]_lookup functions to take skb") Signed-off-by: Máté Eckl Signed-off-by: Pablo Neira Ayuso --- include/net/netfilter/nf_tproxy.h | 4 ++-- net/ipv4/netfilter/nf_tproxy_ipv4.c | 18 ++++++++++++------ net/ipv6/netfilter/nf_tproxy_ipv6.c | 18 ++++++++++++------ net/netfilter/xt_TPROXY.c | 8 ++++---- 4 files changed, 30 insertions(+), 18 deletions(-) diff --git a/include/net/netfilter/nf_tproxy.h b/include/net/netfilter/nf_tproxy.h index 9754a50ecde9..4cc64c8446eb 100644 --- a/include/net/netfilter/nf_tproxy.h +++ b/include/net/netfilter/nf_tproxy.h @@ -64,7 +64,7 @@ nf_tproxy_handle_time_wait4(struct net *net, struct sk_buff *skb, * belonging to established connections going through that one. */ struct sock * -nf_tproxy_get_sock_v4(struct net *net, struct sk_buff *skb, void *hp, +nf_tproxy_get_sock_v4(struct net *net, struct sk_buff *skb, const u8 protocol, const __be32 saddr, const __be32 daddr, const __be16 sport, const __be16 dport, @@ -103,7 +103,7 @@ nf_tproxy_handle_time_wait6(struct sk_buff *skb, int tproto, int thoff, struct sock *sk); struct sock * -nf_tproxy_get_sock_v6(struct net *net, struct sk_buff *skb, int thoff, void *hp, +nf_tproxy_get_sock_v6(struct net *net, struct sk_buff *skb, int thoff, const u8 protocol, const struct in6_addr *saddr, const struct in6_addr *daddr, const __be16 sport, const __be16 dport, diff --git a/net/ipv4/netfilter/nf_tproxy_ipv4.c b/net/ipv4/netfilter/nf_tproxy_ipv4.c index 805e83ec3ad9..164714104965 100644 --- a/net/ipv4/netfilter/nf_tproxy_ipv4.c +++ b/net/ipv4/netfilter/nf_tproxy_ipv4.c @@ -37,7 +37,7 @@ nf_tproxy_handle_time_wait4(struct net *net, struct sk_buff *skb, * to a listener socket if there's one */ struct sock *sk2; - sk2 = nf_tproxy_get_sock_v4(net, skb, hp, iph->protocol, + sk2 = nf_tproxy_get_sock_v4(net, skb, iph->protocol, iph->saddr, laddr ? laddr : iph->daddr, hp->source, lport ? lport : hp->dest, skb->dev, NF_TPROXY_LOOKUP_LISTENER); @@ -71,7 +71,7 @@ __be32 nf_tproxy_laddr4(struct sk_buff *skb, __be32 user_laddr, __be32 daddr) EXPORT_SYMBOL_GPL(nf_tproxy_laddr4); struct sock * -nf_tproxy_get_sock_v4(struct net *net, struct sk_buff *skb, void *hp, +nf_tproxy_get_sock_v4(struct net *net, struct sk_buff *skb, const u8 protocol, const __be32 saddr, const __be32 daddr, const __be16 sport, const __be16 dport, @@ -79,16 +79,21 @@ nf_tproxy_get_sock_v4(struct net *net, struct sk_buff *skb, void *hp, const enum nf_tproxy_lookup_t lookup_type) { struct sock *sk; - struct tcphdr *tcph; switch (protocol) { - case IPPROTO_TCP: + case IPPROTO_TCP: { + struct tcphdr _hdr, *hp; + + hp = skb_header_pointer(skb, ip_hdrlen(skb), + sizeof(struct tcphdr), &_hdr); + if (hp == NULL) + return NULL; + switch (lookup_type) { case NF_TPROXY_LOOKUP_LISTENER: - tcph = hp; sk = inet_lookup_listener(net, &tcp_hashinfo, skb, ip_hdrlen(skb) + - __tcp_hdrlen(tcph), + __tcp_hdrlen(hp), saddr, sport, daddr, dport, in->ifindex, 0); @@ -110,6 +115,7 @@ nf_tproxy_get_sock_v4(struct net *net, struct sk_buff *skb, void *hp, BUG(); } break; + } case IPPROTO_UDP: sk = udp4_lib_lookup(net, saddr, sport, daddr, dport, in->ifindex); diff --git a/net/ipv6/netfilter/nf_tproxy_ipv6.c b/net/ipv6/netfilter/nf_tproxy_ipv6.c index bf1d6c421e3b..5dfd33af6451 100644 --- a/net/ipv6/netfilter/nf_tproxy_ipv6.c +++ b/net/ipv6/netfilter/nf_tproxy_ipv6.c @@ -55,7 +55,7 @@ nf_tproxy_handle_time_wait6(struct sk_buff *skb, int tproto, int thoff, * to a listener socket if there's one */ struct sock *sk2; - sk2 = nf_tproxy_get_sock_v6(net, skb, thoff, hp, tproto, + sk2 = nf_tproxy_get_sock_v6(net, skb, thoff, tproto, &iph->saddr, nf_tproxy_laddr6(skb, laddr, &iph->daddr), hp->source, @@ -72,7 +72,7 @@ nf_tproxy_handle_time_wait6(struct sk_buff *skb, int tproto, int thoff, EXPORT_SYMBOL_GPL(nf_tproxy_handle_time_wait6); struct sock * -nf_tproxy_get_sock_v6(struct net *net, struct sk_buff *skb, int thoff, void *hp, +nf_tproxy_get_sock_v6(struct net *net, struct sk_buff *skb, int thoff, const u8 protocol, const struct in6_addr *saddr, const struct in6_addr *daddr, const __be16 sport, const __be16 dport, @@ -80,15 +80,20 @@ nf_tproxy_get_sock_v6(struct net *net, struct sk_buff *skb, int thoff, void *hp, const enum nf_tproxy_lookup_t lookup_type) { struct sock *sk; - struct tcphdr *tcph; switch (protocol) { - case IPPROTO_TCP: + case IPPROTO_TCP: { + struct tcphdr _hdr, *hp; + + hp = skb_header_pointer(skb, thoff, + sizeof(struct tcphdr), &_hdr); + if (hp == NULL) + return NULL; + switch (lookup_type) { case NF_TPROXY_LOOKUP_LISTENER: - tcph = hp; sk = inet6_lookup_listener(net, &tcp_hashinfo, skb, - thoff + __tcp_hdrlen(tcph), + thoff + __tcp_hdrlen(hp), saddr, sport, daddr, ntohs(dport), in->ifindex, 0); @@ -110,6 +115,7 @@ nf_tproxy_get_sock_v6(struct net *net, struct sk_buff *skb, int thoff, void *hp, BUG(); } break; + } case IPPROTO_UDP: sk = udp6_lib_lookup(net, saddr, sport, daddr, dport, in->ifindex); diff --git a/net/netfilter/xt_TPROXY.c b/net/netfilter/xt_TPROXY.c index 58fce4e749a9..d76550a8b642 100644 --- a/net/netfilter/xt_TPROXY.c +++ b/net/netfilter/xt_TPROXY.c @@ -61,7 +61,7 @@ tproxy_tg4(struct net *net, struct sk_buff *skb, __be32 laddr, __be16 lport, * addresses, this happens if the redirect already happened * and the current packet belongs to an already established * connection */ - sk = nf_tproxy_get_sock_v4(net, skb, hp, iph->protocol, + sk = nf_tproxy_get_sock_v4(net, skb, iph->protocol, iph->saddr, iph->daddr, hp->source, hp->dest, skb->dev, NF_TPROXY_LOOKUP_ESTABLISHED); @@ -77,7 +77,7 @@ tproxy_tg4(struct net *net, struct sk_buff *skb, __be32 laddr, __be16 lport, else if (!sk) /* no, there's no established connection, check if * there's a listener on the redirected addr/port */ - sk = nf_tproxy_get_sock_v4(net, skb, hp, iph->protocol, + sk = nf_tproxy_get_sock_v4(net, skb, iph->protocol, iph->saddr, laddr, hp->source, lport, skb->dev, NF_TPROXY_LOOKUP_LISTENER); @@ -150,7 +150,7 @@ tproxy_tg6_v1(struct sk_buff *skb, const struct xt_action_param *par) * addresses, this happens if the redirect already happened * and the current packet belongs to an already established * connection */ - sk = nf_tproxy_get_sock_v6(xt_net(par), skb, thoff, hp, tproto, + sk = nf_tproxy_get_sock_v6(xt_net(par), skb, thoff, tproto, &iph->saddr, &iph->daddr, hp->source, hp->dest, xt_in(par), NF_TPROXY_LOOKUP_ESTABLISHED); @@ -171,7 +171,7 @@ tproxy_tg6_v1(struct sk_buff *skb, const struct xt_action_param *par) else if (!sk) /* no there's no established connection, check if * there's a listener on the redirected addr/port */ - sk = nf_tproxy_get_sock_v6(xt_net(par), skb, thoff, hp, + sk = nf_tproxy_get_sock_v6(xt_net(par), skb, thoff, tproto, &iph->saddr, laddr, hp->source, lport, xt_in(par), NF_TPROXY_LOOKUP_LISTENER); -- cgit v1.2.3 From a948f713842ad5c23f125efc61dee6951893219c Mon Sep 17 00:00:00 2001 From: Denis Kenzior Date: Tue, 3 Jul 2018 15:05:48 -0500 Subject: nl80211/mac80211: allow non-linear skb in rx_control_port The current implementation of cfg80211_rx_control_port assumed that the caller could provide a contiguous region of memory for the control port frame to be sent up to userspace. Unfortunately, many drivers produce non-linear skbs, especially for data frames. This resulted in userspace getting notified of control port frames with correct metadata (from address, port, etc) yet garbage / nonsense contents, resulting in bad handshakes, disconnections, etc. mac80211 linearizes skbs containing management frames. But it didn't seem worthwhile to do this for control port frames. Thus the signature of cfg80211_rx_control_port was changed to take the skb directly. nl80211 then takes care of obtaining control port frame data directly from the (linear | non-linear) skb. The caller is still responsible for freeing the skb, cfg80211_rx_control_port does not take ownership of it. Fixes: 6a671a50f819 ("nl80211: Add CMD_CONTROL_PORT_FRAME API") Signed-off-by: Denis Kenzior [fix some kernel-doc formatting, add fixes tag] Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 12 ++++++------ net/mac80211/rx.c | 5 +---- net/wireless/nl80211.c | 24 +++++++++++++++--------- net/wireless/trace.h | 18 ++++++++++-------- 4 files changed, 32 insertions(+), 27 deletions(-) diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 5fbfe61f41c6..1beb3ead0385 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -5835,10 +5835,11 @@ void cfg80211_mgmt_tx_status(struct wireless_dev *wdev, u64 cookie, /** * cfg80211_rx_control_port - notification about a received control port frame * @dev: The device the frame matched to - * @buf: control port frame - * @len: length of the frame data - * @addr: The peer from which the frame was received - * @proto: frame protocol, typically PAE or Pre-authentication + * @skb: The skbuf with the control port frame. It is assumed that the skbuf + * is 802.3 formatted (with 802.3 header). The skb can be non-linear. + * This function does not take ownership of the skb, so the caller is + * responsible for any cleanup. The caller must also ensure that + * skb->protocol is set appropriately. * @unencrypted: Whether the frame was received unencrypted * * This function is used to inform userspace about a received control port @@ -5851,8 +5852,7 @@ void cfg80211_mgmt_tx_status(struct wireless_dev *wdev, u64 cookie, * Return: %true if the frame was passed to userspace */ bool cfg80211_rx_control_port(struct net_device *dev, - const u8 *buf, size_t len, - const u8 *addr, u16 proto, bool unencrypted); + struct sk_buff *skb, bool unencrypted); /** * cfg80211_cqm_rssi_notify - connection quality monitoring rssi event diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 0a38cc1cbebc..932985ca4e66 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -2254,11 +2254,8 @@ static void ieee80211_deliver_skb_to_local_stack(struct sk_buff *skb, sdata->control_port_over_nl80211)) { struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb); bool noencrypt = status->flag & RX_FLAG_DECRYPTED; - struct ethhdr *ehdr = eth_hdr(skb); - cfg80211_rx_control_port(dev, skb->data, skb->len, - ehdr->h_source, - be16_to_cpu(skb->protocol), noencrypt); + cfg80211_rx_control_port(dev, skb, noencrypt); dev_kfree_skb(skb); } else { /* deliver to local stack */ diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 4eece06be1e7..b6c700572755 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -14923,20 +14923,24 @@ void cfg80211_mgmt_tx_status(struct wireless_dev *wdev, u64 cookie, EXPORT_SYMBOL(cfg80211_mgmt_tx_status); static int __nl80211_rx_control_port(struct net_device *dev, - const u8 *buf, size_t len, - const u8 *addr, u16 proto, + struct sk_buff *skb, bool unencrypted, gfp_t gfp) { struct wireless_dev *wdev = dev->ieee80211_ptr; struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy); + struct ethhdr *ehdr = eth_hdr(skb); + const u8 *addr = ehdr->h_source; + u16 proto = be16_to_cpu(skb->protocol); struct sk_buff *msg; void *hdr; + struct nlattr *frame; + u32 nlportid = READ_ONCE(wdev->conn_owner_nlportid); if (!nlportid) return -ENOENT; - msg = nlmsg_new(100 + len, gfp); + msg = nlmsg_new(100 + skb->len, gfp); if (!msg) return -ENOMEM; @@ -14950,13 +14954,17 @@ static int __nl80211_rx_control_port(struct net_device *dev, nla_put_u32(msg, NL80211_ATTR_IFINDEX, dev->ifindex) || nla_put_u64_64bit(msg, NL80211_ATTR_WDEV, wdev_id(wdev), NL80211_ATTR_PAD) || - nla_put(msg, NL80211_ATTR_FRAME, len, buf) || nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN, addr) || nla_put_u16(msg, NL80211_ATTR_CONTROL_PORT_ETHERTYPE, proto) || (unencrypted && nla_put_flag(msg, NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT))) goto nla_put_failure; + frame = nla_reserve(msg, NL80211_ATTR_FRAME, skb->len); + if (!frame) + goto nla_put_failure; + + skb_copy_bits(skb, 0, nla_data(frame), skb->len); genlmsg_end(msg, hdr); return genlmsg_unicast(wiphy_net(&rdev->wiphy), msg, nlportid); @@ -14967,14 +14975,12 @@ static int __nl80211_rx_control_port(struct net_device *dev, } bool cfg80211_rx_control_port(struct net_device *dev, - const u8 *buf, size_t len, - const u8 *addr, u16 proto, bool unencrypted) + struct sk_buff *skb, bool unencrypted) { int ret; - trace_cfg80211_rx_control_port(dev, buf, len, addr, proto, unencrypted); - ret = __nl80211_rx_control_port(dev, buf, len, addr, proto, - unencrypted, GFP_ATOMIC); + trace_cfg80211_rx_control_port(dev, skb, unencrypted); + ret = __nl80211_rx_control_port(dev, skb, unencrypted, GFP_ATOMIC); trace_cfg80211_return_bool(ret == 0); return ret == 0; } diff --git a/net/wireless/trace.h b/net/wireless/trace.h index 2b417a2fe63f..7c73510b161f 100644 --- a/net/wireless/trace.h +++ b/net/wireless/trace.h @@ -2627,23 +2627,25 @@ TRACE_EVENT(cfg80211_mgmt_tx_status, ); TRACE_EVENT(cfg80211_rx_control_port, - TP_PROTO(struct net_device *netdev, const u8 *buf, size_t len, - const u8 *addr, u16 proto, bool unencrypted), - TP_ARGS(netdev, buf, len, addr, proto, unencrypted), + TP_PROTO(struct net_device *netdev, struct sk_buff *skb, + bool unencrypted), + TP_ARGS(netdev, skb, unencrypted), TP_STRUCT__entry( NETDEV_ENTRY - MAC_ENTRY(addr) + __field(int, len) + MAC_ENTRY(from) __field(u16, proto) __field(bool, unencrypted) ), TP_fast_assign( NETDEV_ASSIGN; - MAC_ASSIGN(addr, addr); - __entry->proto = proto; + __entry->len = skb->len; + MAC_ASSIGN(from, eth_hdr(skb)->h_source); + __entry->proto = be16_to_cpu(skb->protocol); __entry->unencrypted = unencrypted; ), - TP_printk(NETDEV_PR_FMT ", " MAC_PR_FMT " proto: 0x%x, unencrypted: %s", - NETDEV_PR_ARG, MAC_PR_ARG(addr), + TP_printk(NETDEV_PR_FMT ", len=%d, " MAC_PR_FMT ", proto: 0x%x, unencrypted: %s", + NETDEV_PR_ARG, __entry->len, MAC_PR_ARG(from), __entry->proto, BOOL_TO_STR(__entry->unencrypted)) ); -- cgit v1.2.3 From e240cd0df48185a28c153f83a39ba3940e3e9b86 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Fri, 6 Jul 2018 19:06:43 +0200 Subject: netfilter: nf_tables: place all set backends in one single module This patch disallows rbtree with single elements, which is causing problems with the recent timeout support. Before this patch, you could opt out individual set representations per module, which is just adding extra complexity. Fixes: 8d8540c4f5e0("netfilter: nft_set_rbtree: add timeout support") Reported-by: Taehee Yoo Signed-off-by: Pablo Neira Ayuso --- include/net/netfilter/nf_tables_core.h | 6 ++++++ net/netfilter/Kconfig | 25 +++++++------------------ net/netfilter/Makefile | 7 ++++--- net/netfilter/nf_tables_set_core.c | 28 ++++++++++++++++++++++++++++ net/netfilter/nft_set_bitmap.c | 19 +------------------ net/netfilter/nft_set_hash.c | 29 +++-------------------------- net/netfilter/nft_set_rbtree.c | 19 +------------------ 7 files changed, 50 insertions(+), 83 deletions(-) create mode 100644 net/netfilter/nf_tables_set_core.c diff --git a/include/net/netfilter/nf_tables_core.h b/include/net/netfilter/nf_tables_core.h index e0c0c2558ec4..a05134507e7b 100644 --- a/include/net/netfilter/nf_tables_core.h +++ b/include/net/netfilter/nf_tables_core.h @@ -65,4 +65,10 @@ extern const struct nft_expr_ops nft_payload_fast_ops; extern struct static_key_false nft_counters_enabled; extern struct static_key_false nft_trace_enabled; +extern struct nft_set_type nft_set_rhash_type; +extern struct nft_set_type nft_set_hash_type; +extern struct nft_set_type nft_set_hash_fast_type; +extern struct nft_set_type nft_set_rbtree_type; +extern struct nft_set_type nft_set_bitmap_type; + #endif /* _NET_NF_TABLES_CORE_H */ diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig index dbd7d1fad277..f0a1c536ef15 100644 --- a/net/netfilter/Kconfig +++ b/net/netfilter/Kconfig @@ -460,6 +460,13 @@ config NF_TABLES if NF_TABLES +config NF_TABLES_SET + tristate "Netfilter nf_tables set infrastructure" + help + This option enables the nf_tables set infrastructure that allows to + look up for elements in a set and to build one-way mappings between + matchings and actions. + config NF_TABLES_INET depends on IPV6 select NF_TABLES_IPV4 @@ -493,24 +500,6 @@ config NFT_FLOW_OFFLOAD This option adds the "flow_offload" expression that you can use to choose what flows are placed into the hardware. -config NFT_SET_RBTREE - tristate "Netfilter nf_tables rbtree set module" - help - This option adds the "rbtree" set type (Red Black tree) that is used - to build interval-based sets. - -config NFT_SET_HASH - tristate "Netfilter nf_tables hash set module" - help - This option adds the "hash" set type that is used to build one-way - mappings between matchings and actions. - -config NFT_SET_BITMAP - tristate "Netfilter nf_tables bitmap set module" - help - This option adds the "bitmap" set type that is used to build sets - whose keys are smaller or equal to 16 bits. - config NFT_COUNTER tristate "Netfilter nf_tables counter module" help diff --git a/net/netfilter/Makefile b/net/netfilter/Makefile index 44449389e527..8a76dced974d 100644 --- a/net/netfilter/Makefile +++ b/net/netfilter/Makefile @@ -78,7 +78,11 @@ nf_tables-objs := nf_tables_core.o nf_tables_api.o nft_chain_filter.o \ nft_bitwise.o nft_byteorder.o nft_payload.o nft_lookup.o \ nft_dynset.o nft_meta.o nft_rt.o nft_exthdr.o +nf_tables_set-objs := nf_tables_set_core.o \ + nft_set_hash.o nft_set_bitmap.o nft_set_rbtree.o + obj-$(CONFIG_NF_TABLES) += nf_tables.o +obj-$(CONFIG_NF_TABLES_SET) += nf_tables_set.o obj-$(CONFIG_NFT_COMPAT) += nft_compat.o obj-$(CONFIG_NFT_CONNLIMIT) += nft_connlimit.o obj-$(CONFIG_NFT_NUMGEN) += nft_numgen.o @@ -91,9 +95,6 @@ obj-$(CONFIG_NFT_QUEUE) += nft_queue.o obj-$(CONFIG_NFT_QUOTA) += nft_quota.o obj-$(CONFIG_NFT_REJECT) += nft_reject.o obj-$(CONFIG_NFT_REJECT_INET) += nft_reject_inet.o -obj-$(CONFIG_NFT_SET_RBTREE) += nft_set_rbtree.o -obj-$(CONFIG_NFT_SET_HASH) += nft_set_hash.o -obj-$(CONFIG_NFT_SET_BITMAP) += nft_set_bitmap.o obj-$(CONFIG_NFT_COUNTER) += nft_counter.o obj-$(CONFIG_NFT_LOG) += nft_log.o obj-$(CONFIG_NFT_MASQ) += nft_masq.o diff --git a/net/netfilter/nf_tables_set_core.c b/net/netfilter/nf_tables_set_core.c new file mode 100644 index 000000000000..814789644bd3 --- /dev/null +++ b/net/netfilter/nf_tables_set_core.c @@ -0,0 +1,28 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#include + +static int __init nf_tables_set_module_init(void) +{ + nft_register_set(&nft_set_hash_fast_type); + nft_register_set(&nft_set_hash_type); + nft_register_set(&nft_set_rhash_type); + nft_register_set(&nft_set_bitmap_type); + nft_register_set(&nft_set_rbtree_type); + + return 0; +} + +static void __exit nf_tables_set_module_exit(void) +{ + nft_unregister_set(&nft_set_rbtree_type); + nft_unregister_set(&nft_set_bitmap_type); + nft_unregister_set(&nft_set_rhash_type); + nft_unregister_set(&nft_set_hash_type); + nft_unregister_set(&nft_set_hash_fast_type); +} + +module_init(nf_tables_set_module_init); +module_exit(nf_tables_set_module_exit); + +MODULE_LICENSE("GPL"); +MODULE_ALIAS_NFT_SET(); diff --git a/net/netfilter/nft_set_bitmap.c b/net/netfilter/nft_set_bitmap.c index d6626e01c7ee..128bc16f52dd 100644 --- a/net/netfilter/nft_set_bitmap.c +++ b/net/netfilter/nft_set_bitmap.c @@ -296,7 +296,7 @@ static bool nft_bitmap_estimate(const struct nft_set_desc *desc, u32 features, return true; } -static struct nft_set_type nft_bitmap_type __read_mostly = { +struct nft_set_type nft_set_bitmap_type __read_mostly = { .owner = THIS_MODULE, .ops = { .privsize = nft_bitmap_privsize, @@ -314,20 +314,3 @@ static struct nft_set_type nft_bitmap_type __read_mostly = { .get = nft_bitmap_get, }, }; - -static int __init nft_bitmap_module_init(void) -{ - return nft_register_set(&nft_bitmap_type); -} - -static void __exit nft_bitmap_module_exit(void) -{ - nft_unregister_set(&nft_bitmap_type); -} - -module_init(nft_bitmap_module_init); -module_exit(nft_bitmap_module_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Pablo Neira Ayuso "); -MODULE_ALIAS_NFT_SET(); diff --git a/net/netfilter/nft_set_hash.c b/net/netfilter/nft_set_hash.c index 6f9a1365a09f..72ef35b51cac 100644 --- a/net/netfilter/nft_set_hash.c +++ b/net/netfilter/nft_set_hash.c @@ -654,7 +654,7 @@ static bool nft_hash_fast_estimate(const struct nft_set_desc *desc, u32 features return true; } -static struct nft_set_type nft_rhash_type __read_mostly = { +struct nft_set_type nft_set_rhash_type __read_mostly = { .owner = THIS_MODULE, .features = NFT_SET_MAP | NFT_SET_OBJECT | NFT_SET_TIMEOUT | NFT_SET_EVAL, @@ -677,7 +677,7 @@ static struct nft_set_type nft_rhash_type __read_mostly = { }, }; -static struct nft_set_type nft_hash_type __read_mostly = { +struct nft_set_type nft_set_hash_type __read_mostly = { .owner = THIS_MODULE, .features = NFT_SET_MAP | NFT_SET_OBJECT, .ops = { @@ -697,7 +697,7 @@ static struct nft_set_type nft_hash_type __read_mostly = { }, }; -static struct nft_set_type nft_hash_fast_type __read_mostly = { +struct nft_set_type nft_set_hash_fast_type __read_mostly = { .owner = THIS_MODULE, .features = NFT_SET_MAP | NFT_SET_OBJECT, .ops = { @@ -716,26 +716,3 @@ static struct nft_set_type nft_hash_fast_type __read_mostly = { .get = nft_hash_get, }, }; - -static int __init nft_hash_module_init(void) -{ - if (nft_register_set(&nft_hash_fast_type) || - nft_register_set(&nft_hash_type) || - nft_register_set(&nft_rhash_type)) - return 1; - return 0; -} - -static void __exit nft_hash_module_exit(void) -{ - nft_unregister_set(&nft_rhash_type); - nft_unregister_set(&nft_hash_type); - nft_unregister_set(&nft_hash_fast_type); -} - -module_init(nft_hash_module_init); -module_exit(nft_hash_module_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Patrick McHardy "); -MODULE_ALIAS_NFT_SET(); diff --git a/net/netfilter/nft_set_rbtree.c b/net/netfilter/nft_set_rbtree.c index 7f3a9a211034..1f8f257cb518 100644 --- a/net/netfilter/nft_set_rbtree.c +++ b/net/netfilter/nft_set_rbtree.c @@ -462,7 +462,7 @@ static bool nft_rbtree_estimate(const struct nft_set_desc *desc, u32 features, return true; } -static struct nft_set_type nft_rbtree_type __read_mostly = { +struct nft_set_type nft_set_rbtree_type __read_mostly = { .owner = THIS_MODULE, .features = NFT_SET_INTERVAL | NFT_SET_MAP | NFT_SET_OBJECT | NFT_SET_TIMEOUT, .ops = { @@ -481,20 +481,3 @@ static struct nft_set_type nft_rbtree_type __read_mostly = { .get = nft_rbtree_get, }, }; - -static int __init nft_rbtree_module_init(void) -{ - return nft_register_set(&nft_rbtree_type); -} - -static void __exit nft_rbtree_module_exit(void) -{ - nft_unregister_set(&nft_rbtree_type); -} - -module_init(nft_rbtree_module_init); -module_exit(nft_rbtree_module_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Patrick McHardy "); -MODULE_ALIAS_NFT_SET(); -- cgit v1.2.3 From 5f75b78d3d67b7547905a2939a36998b89d87074 Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Fri, 6 Jul 2018 10:25:40 +0530 Subject: clk: qcom: gcc-msm8996: Disable halt check on UFS tx clock Commit 12d807cd34b8 ("clk: qcom: gcc-msm8996: Disable halt check on UFS clocks") marked BRANCH_HALT_SKIP for ufs rx clocks, but missed ufs tx clocks. The result of that is kernel warnings at reboot: [ 105.624283] gcc_ufs_tx_symbol_0_clk status stuck at 'on' [ 105.624311] WARNING: CPU: 1 PID: 1 at drivers/clk/qcom/clk-branch.c:100 clk_branch_toggle+0x190/0x1b0 [ 105.633235] Modules linked in: [ 105.645118] CPU: 1 PID: 1 Comm: systemd-shutdow Tainted: G W 4.18.0-rc2-00002-g2bfbe52a53a3 #11 [ 105.647988] Hardware name: Qualcomm Technologies, Inc. DB820c (DT) [ 105.657966] pstate: 60000085 (nZCv daIf -PAN -UAO) [ 105.664127] pc : clk_branch_toggle+0x190/0x1b0 [ 105.668900] lr : clk_branch_toggle+0x190/0x1b0 [ 105.673324] sp : ffff00000805bb40 [ 105.677751] x29: ffff00000805bb40 x28: 0000000000000000 [ 105.681140] x27: ffff8000d947cc60 x26: 0000000000000001 [ 105.686520] x25: ffff000008f71900 x24: 0000000000000000 [ 105.691816] x23: ffff00000925e338 x22: ffff00000855f8e0 [ 105.697114] x21: 0000000000000000 x20: 0000000000000000 [ 105.702407] x19: ffff0000091c9000 x18: ffffffffffffffff [ 105.707702] x17: 0000ffffac148c58 x16: ffff000008b82928 [ 105.712998] x15: ffff0000091c96c8 x14: ffff0000893817c7 [ 105.718293] x13: ffff0000093817d5 x12: ffff0000091c9940 [ 105.723587] x11: ffff0000085e3e70 x10: ffff00000805b780 [ 105.728884] x9 : ffff00000805bb40 x8 : 7320737574617473 [ 105.734179] x7 : 206b6c635f305f6c x6 : 00000000000001e5 [ 105.739472] x5 : 0000000000000000 x4 : 0000000000000000 [ 105.744769] x3 : ffffffffffffffff x2 : ffff0000091e2658 [ 105.750063] x1 : a7c4712dd5e09c00 x0 : 0000000000000000 [ 105.755360] Call trace: [ 105.760652] clk_branch_toggle+0x190/0x1b0 [ 105.762824] clk_branch2_disable+0x18/0x20 [ 105.766994] clk_core_disable+0x58/0xa8 [ 105.771069] clk_core_disable_lock+0x20/0x38 [ 105.774803] clk_disable+0x1c/0x28 [ 105.779320] __ufshcd_setup_clocks+0x298/0x308 [ 105.782529] ufshcd_suspend+0x160/0x308 [ 105.786953] ufshcd_shutdown+0x38/0xa0 [ 105.790690] ufshcd_pltfrm_shutdown+0x10/0x18 [ 105.794512] platform_drv_shutdown+0x20/0x30 [ 105.798935] device_shutdown+0x110/0x1e8 [ 105.803278] kernel_restart_prepare+0x34/0x40 [ 105.807181] kernel_restart+0x14/0x78 [ 105.811434] sys_reboot+0x200/0x248 [ 105.815081] el0_svc_naked+0x30/0x34 [ 105.818378] ---[ end trace 8d2322276b27879c ]--- Mark gcc_ufs_tx_symbol_0_clk as BRANCH_HALT_SKIP as well. Fixes: 12d807cd34b8 ("clk: qcom: gcc-msm8996: Disable halt check on UFS clocks") Reviewed-by: Bjorn Andersson Signed-off-by: Vinod Koul Signed-off-by: Stephen Boyd --- drivers/clk/qcom/gcc-msm8996.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/clk/qcom/gcc-msm8996.c b/drivers/clk/qcom/gcc-msm8996.c index 9f35b3fe1d97..ff8d66fd94e6 100644 --- a/drivers/clk/qcom/gcc-msm8996.c +++ b/drivers/clk/qcom/gcc-msm8996.c @@ -2781,6 +2781,7 @@ static struct clk_branch gcc_ufs_rx_cfg_clk = { static struct clk_branch gcc_ufs_tx_symbol_0_clk = { .halt_reg = 0x75018, + .halt_check = BRANCH_HALT_SKIP, .clkr = { .enable_reg = 0x75018, .enable_mask = BIT(0), -- cgit v1.2.3 From 40dd71c75e395d9b0343f1e646de7ab5312540cc Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 6 Jul 2018 17:16:54 +0200 Subject: clk: Really show symbolic clock flags in debugfs The last-minute fold-in of the ENTRY() macro did change behavior: instead of printing the symbolic name (e.g. "CLK_IS_BASIC"), it prints the expansion of it (e.g. "(1UL << (5))"). Use "#" instead of __stringify() to fix this. Fixes: a6059ab98130fb56 ("clk: Show symbolic clock flags in debugfs") Signed-off-by: Geert Uytterhoeven Signed-off-by: Stephen Boyd --- drivers/clk/clk.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index 9760b526ca31..e2ed078abd90 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -24,7 +24,6 @@ #include #include #include -#include #include "clk.h" @@ -2559,7 +2558,7 @@ static const struct { unsigned long flag; const char *name; } clk_flags[] = { -#define ENTRY(f) { f, __stringify(f) } +#define ENTRY(f) { f, #f } ENTRY(CLK_SET_RATE_GATE), ENTRY(CLK_SET_PARENT_GATE), ENTRY(CLK_SET_RATE_PARENT), -- cgit v1.2.3 From edc6f7e9b11d4ab54f80890dedf58a914cae61e4 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 3 Jul 2018 17:24:47 +1000 Subject: clk: aspeed: Treat a gate in reset as disabled On some systems, we come out of the bootloader with some gates set with the clock "enabled" but the reset also asserted. Since 8a53fc511c5e "clk: aspeed: Prevent reset if clock is enabled" we check that enabled bit in aspeed_clk_enabled(), and do nothing if already set. This breaks when the above scenario occurs, as the clock is enabled, but the reset still needs to be lifted. This patch fixes it by also checking the reset bit (if any) and treating a gate in "reset" as being disabled. Signed-off-by: Benjamin Herrenschmidt Fixes: 8a53fc511c5e "clk: aspeed: Prevent reset if clock is enabled" Cc: Eddie James Reviewed-by: Joel Stanley Signed-off-by: Stephen Boyd --- drivers/clk/clk-aspeed.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/clk/clk-aspeed.c b/drivers/clk/clk-aspeed.c index 38b366b00c57..4ac926ab7530 100644 --- a/drivers/clk/clk-aspeed.c +++ b/drivers/clk/clk-aspeed.c @@ -212,9 +212,22 @@ static int aspeed_clk_is_enabled(struct clk_hw *hw) { struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw); u32 clk = BIT(gate->clock_idx); + u32 rst = BIT(gate->reset_idx); u32 enval = (gate->flags & CLK_GATE_SET_TO_DISABLE) ? 0 : clk; u32 reg; + /* + * If the IP is in reset, treat the clock as not enabled, + * this happens with some clocks such as the USB one when + * coming from cold reset. Without this, aspeed_clk_enable() + * will fail to lift the reset. + */ + if (gate->reset_idx >= 0) { + regmap_read(gate->map, ASPEED_RESET_CTRL, ®); + if (reg & rst) + return 0; + } + regmap_read(gate->map, ASPEED_CLK_STOP_CTRL, ®); return ((reg & clk) == enval) ? 1 : 0; -- cgit v1.2.3 From 53f3abe97b246ae8d36d868d5403bed057dfa4a7 Mon Sep 17 00:00:00 2001 From: Vivek Gautam Date: Fri, 29 Jun 2018 17:06:40 +0530 Subject: clk/mmcc-msm8996: Make mmagic_bimc_gdsc ALWAYS_ON Patch (7705bb7176b9 clk: qcom: mmcc-msm8996: leave all mmagic gdscs and clocks always enabled") makes all mmgaic gdscs ALWAYS_ON. The mmagic_bimc_gdsc is also needed to be turned on to get display working on 8x96. Signed-off-by: Vivek Gautam Cc: Rajendra Nayak Cc: Bjorn Andersson Cc: Srinivas Kandagatla Fixes: 7705bb7176b9 ("clk: qcom: mmcc-msm8996: leave all mmagic gdscs and clocks always enabled") Signed-off-by: Stephen Boyd --- drivers/clk/qcom/mmcc-msm8996.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/clk/qcom/mmcc-msm8996.c b/drivers/clk/qcom/mmcc-msm8996.c index 1a25ee4f3658..4b20d1b67a1b 100644 --- a/drivers/clk/qcom/mmcc-msm8996.c +++ b/drivers/clk/qcom/mmcc-msm8996.c @@ -2910,6 +2910,7 @@ static struct gdsc mmagic_bimc_gdsc = { .name = "mmagic_bimc", }, .pwrsts = PWRSTS_OFF_ON, + .flags = ALWAYS_ON, }; static struct gdsc mmagic_video_gdsc = { -- cgit v1.2.3 From 974c7c6d7ba5a4b12d99456b0599aa6326dc2b69 Mon Sep 17 00:00:00 2001 From: Joel Stanley Date: Thu, 7 Jun 2018 16:39:59 +0930 Subject: clk: aspeed: Mark bclk (PCIe) and dclk (VGA) as critical This is used by the host to talk to the BMC's PCIe slave device. The BMC is not involved, but the clock needs to be enabled so the host can use the device. Fixes: 15ed8ce5f84e ("clk: aspeed: Register gated clocks") Cc: stable@vger.kernel.org # 4.15 Acked-by: Andrew Jeffery Tested-by: Lei YU Signed-off-by: Joel Stanley Signed-off-by: Stephen Boyd --- drivers/clk/clk-aspeed.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/clk/clk-aspeed.c b/drivers/clk/clk-aspeed.c index 4ac926ab7530..0fc446ecdf54 100644 --- a/drivers/clk/clk-aspeed.c +++ b/drivers/clk/clk-aspeed.c @@ -91,8 +91,8 @@ static const struct aspeed_gate_data aspeed_gates[] = { [ASPEED_CLK_GATE_GCLK] = { 1, 7, "gclk-gate", NULL, 0 }, /* 2D engine */ [ASPEED_CLK_GATE_MCLK] = { 2, -1, "mclk-gate", "mpll", CLK_IS_CRITICAL }, /* SDRAM */ [ASPEED_CLK_GATE_VCLK] = { 3, 6, "vclk-gate", NULL, 0 }, /* Video Capture */ - [ASPEED_CLK_GATE_BCLK] = { 4, 8, "bclk-gate", "bclk", 0 }, /* PCIe/PCI */ - [ASPEED_CLK_GATE_DCLK] = { 5, -1, "dclk-gate", NULL, 0 }, /* DAC */ + [ASPEED_CLK_GATE_BCLK] = { 4, 8, "bclk-gate", "bclk", CLK_IS_CRITICAL }, /* PCIe/PCI */ + [ASPEED_CLK_GATE_DCLK] = { 5, -1, "dclk-gate", NULL, CLK_IS_CRITICAL }, /* DAC */ [ASPEED_CLK_GATE_REFCLK] = { 6, -1, "refclk-gate", "clkin", CLK_IS_CRITICAL }, [ASPEED_CLK_GATE_USBPORT2CLK] = { 7, 3, "usb-port2-gate", NULL, 0 }, /* USB2.0 Host port 2 */ [ASPEED_CLK_GATE_LCLK] = { 8, 5, "lclk-gate", NULL, 0 }, /* LPC */ -- cgit v1.2.3 From 53a710b5044d8475faa6813000b6dd659400ef7b Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Wed, 4 Jul 2018 11:12:39 +0300 Subject: sh_eth: fix invalid context bug while calling auto-negotiation by ethtool Since commit 35b5f6b1a82b ("PHYLIB: Locking fixes for PHY I/O potentially sleeping") phy_start_aneg() function utilizes a mutex to serialize changes to phy state, however the helper function is called in atomic context. The bug can be reproduced by running "ethtool -r" command, the bug is reported if CONFIG_DEBUG_ATOMIC_SLEEP build option is enabled. Fixes: dc19e4e5e02f ("sh: sh_eth: Add support ethtool") Signed-off-by: Vladimir Zapolskiy Reviewed-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/sh_eth.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index e9007b613f17..e8aca46bb925 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -2265,18 +2265,10 @@ static void sh_eth_get_regs(struct net_device *ndev, struct ethtool_regs *regs, static int sh_eth_nway_reset(struct net_device *ndev) { - struct sh_eth_private *mdp = netdev_priv(ndev); - unsigned long flags; - int ret; - if (!ndev->phydev) return -ENODEV; - spin_lock_irqsave(&mdp->lock, flags); - ret = phy_start_aneg(ndev->phydev); - spin_unlock_irqrestore(&mdp->lock, flags); - - return ret; + return phy_start_aneg(ndev->phydev); } static u32 sh_eth_get_msglevel(struct net_device *ndev) -- cgit v1.2.3 From 5cb3f52a11e18628fc4bee76dd14b1f0b76349de Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Wed, 4 Jul 2018 11:12:40 +0300 Subject: sh_eth: fix invalid context bug while changing link options by ethtool The change fixes sleep in atomic context bug, which is encountered every time when link settings are changed by ethtool. Since commit 35b5f6b1a82b ("PHYLIB: Locking fixes for PHY I/O potentially sleeping") phy_start_aneg() function utilizes a mutex to serialize changes to phy state, however that helper function is called in atomic context under a grabbed spinlock, because phy_start_aneg() is called by phy_ethtool_ksettings_set() and by replaced phy_ethtool_sset() helpers from phylib. Now duplex mode setting is enforced in sh_eth_adjust_link() only, also now RX/TX is disabled when link is put down or modifications to E-MAC registers ECMR and GECMR are expected for both cases of checked and ignored link status pin state from E-MAC interrupt handler. For reference the change is a partial rework of commit 1e1b812bbe10 ("sh_eth: fix handling of no LINK signal"). Fixes: dc19e4e5e02f ("sh: sh_eth: Add support ethtool") Signed-off-by: Vladimir Zapolskiy Reviewed-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/sh_eth.c | 49 +++++++++++------------------------ 1 file changed, 15 insertions(+), 34 deletions(-) diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index e8aca46bb925..8e429e865552 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -1927,8 +1927,15 @@ static void sh_eth_adjust_link(struct net_device *ndev) { struct sh_eth_private *mdp = netdev_priv(ndev); struct phy_device *phydev = ndev->phydev; + unsigned long flags; int new_state = 0; + spin_lock_irqsave(&mdp->lock, flags); + + /* Disable TX and RX right over here, if E-MAC change is ignored */ + if (mdp->cd->no_psr || mdp->no_ether_link) + sh_eth_rcv_snd_disable(ndev); + if (phydev->link) { if (phydev->duplex != mdp->duplex) { new_state = 1; @@ -1947,18 +1954,21 @@ static void sh_eth_adjust_link(struct net_device *ndev) sh_eth_modify(ndev, ECMR, ECMR_TXF, 0); new_state = 1; mdp->link = phydev->link; - if (mdp->cd->no_psr || mdp->no_ether_link) - sh_eth_rcv_snd_enable(ndev); } } else if (mdp->link) { new_state = 1; mdp->link = 0; mdp->speed = 0; mdp->duplex = -1; - if (mdp->cd->no_psr || mdp->no_ether_link) - sh_eth_rcv_snd_disable(ndev); } + /* Enable TX and RX right over here, if E-MAC change is ignored */ + if ((mdp->cd->no_psr || mdp->no_ether_link) && phydev->link) + sh_eth_rcv_snd_enable(ndev); + + mmiowb(); + spin_unlock_irqrestore(&mdp->lock, flags); + if (new_state && netif_msg_link(mdp)) phy_print_status(phydev); } @@ -2049,39 +2059,10 @@ static int sh_eth_get_link_ksettings(struct net_device *ndev, static int sh_eth_set_link_ksettings(struct net_device *ndev, const struct ethtool_link_ksettings *cmd) { - struct sh_eth_private *mdp = netdev_priv(ndev); - unsigned long flags; - int ret; - if (!ndev->phydev) return -ENODEV; - spin_lock_irqsave(&mdp->lock, flags); - - /* disable tx and rx */ - sh_eth_rcv_snd_disable(ndev); - - ret = phy_ethtool_ksettings_set(ndev->phydev, cmd); - if (ret) - goto error_exit; - - if (cmd->base.duplex == DUPLEX_FULL) - mdp->duplex = 1; - else - mdp->duplex = 0; - - if (mdp->cd->set_duplex) - mdp->cd->set_duplex(ndev); - -error_exit: - mdelay(1); - - /* enable tx and rx */ - sh_eth_rcv_snd_enable(ndev); - - spin_unlock_irqrestore(&mdp->lock, flags); - - return ret; + return phy_ethtool_ksettings_set(ndev->phydev, cmd); } /* If it is ever necessary to increase SH_ETH_REG_DUMP_MAX_REGS, the -- cgit v1.2.3 From e0afa1030b7ffc2fb68d38fb859837f13cdd3807 Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Wed, 4 Jul 2018 11:12:41 +0300 Subject: sh_eth: simplify link auto-negotiation by ethtool There is no need to call a heavyweight phy_start_aneg() for phy auto-negotiation by ethtool, the phy is already initialized and link auto-negotiation is started by calling phy_start() from sh_eth_phy_start() when a network device is opened. Signed-off-by: Vladimir Zapolskiy Reviewed-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/sh_eth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index 8e429e865552..1bed2ee4d709 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -2249,7 +2249,7 @@ static int sh_eth_nway_reset(struct net_device *ndev) if (!ndev->phydev) return -ENODEV; - return phy_start_aneg(ndev->phydev); + return phy_restart_aneg(ndev->phydev); } static u32 sh_eth_get_msglevel(struct net_device *ndev) -- cgit v1.2.3 From 4c10628afda78dbf5dffc13360b576370ee98aab Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Wed, 4 Jul 2018 11:12:42 +0300 Subject: sh_eth: remove custom .nway_reset from ethtool ops The generic phy_ethtool_nway_reset() function from phylib can be used instead of in-house sh_eth_nway_reset(). Signed-off-by: Vladimir Zapolskiy Reviewed-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/sh_eth.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index 1bed2ee4d709..50ff18870be2 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -2244,14 +2244,6 @@ static void sh_eth_get_regs(struct net_device *ndev, struct ethtool_regs *regs, pm_runtime_put_sync(&mdp->pdev->dev); } -static int sh_eth_nway_reset(struct net_device *ndev) -{ - if (!ndev->phydev) - return -ENODEV; - - return phy_restart_aneg(ndev->phydev); -} - static u32 sh_eth_get_msglevel(struct net_device *ndev) { struct sh_eth_private *mdp = netdev_priv(ndev); @@ -2402,7 +2394,7 @@ static int sh_eth_set_wol(struct net_device *ndev, struct ethtool_wolinfo *wol) static const struct ethtool_ops sh_eth_ethtool_ops = { .get_regs_len = sh_eth_get_regs_len, .get_regs = sh_eth_get_regs, - .nway_reset = sh_eth_nway_reset, + .nway_reset = phy_ethtool_nway_reset, .get_msglevel = sh_eth_get_msglevel, .set_msglevel = sh_eth_set_msglevel, .get_link = ethtool_op_get_link, -- cgit v1.2.3 From f3146f3774c8657b25326313ce807a5d4eac1d40 Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Wed, 4 Jul 2018 11:14:47 +0300 Subject: sh_eth: remove useless serialization in sh_eth_get_link_ksettings() phy_ethtool_ksettings_get() call does not modify device state or device driver state, hence there is no need to utilize a driver specific spinlock. Signed-off-by: Vladimir Zapolskiy Reviewed-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/sh_eth.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index 50ff18870be2..152edd1e9a23 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -2043,15 +2043,10 @@ static int sh_eth_phy_start(struct net_device *ndev) static int sh_eth_get_link_ksettings(struct net_device *ndev, struct ethtool_link_ksettings *cmd) { - struct sh_eth_private *mdp = netdev_priv(ndev); - unsigned long flags; - if (!ndev->phydev) return -ENODEV; - spin_lock_irqsave(&mdp->lock, flags); phy_ethtool_ksettings_get(ndev->phydev, cmd); - spin_unlock_irqrestore(&mdp->lock, flags); return 0; } -- cgit v1.2.3 From 45abbd431939fe77b365949e946fb29094d72656 Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Wed, 4 Jul 2018 11:14:48 +0300 Subject: sh_eth: remove custom .get_link_ksettings from ethtool ops The generic phy_ethtool_get_link_ksettings() function from phylib can be used instead of in-house sh_eth_get_link_ksettings(). Signed-off-by: Vladimir Zapolskiy Reviewed-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/sh_eth.c | 13 +------------ 1 file changed, 1 insertion(+), 12 deletions(-) diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index 152edd1e9a23..bd4a0b9c3362 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -2040,17 +2040,6 @@ static int sh_eth_phy_start(struct net_device *ndev) return 0; } -static int sh_eth_get_link_ksettings(struct net_device *ndev, - struct ethtool_link_ksettings *cmd) -{ - if (!ndev->phydev) - return -ENODEV; - - phy_ethtool_ksettings_get(ndev->phydev, cmd); - - return 0; -} - static int sh_eth_set_link_ksettings(struct net_device *ndev, const struct ethtool_link_ksettings *cmd) { @@ -2398,7 +2387,7 @@ static const struct ethtool_ops sh_eth_ethtool_ops = { .get_sset_count = sh_eth_get_sset_count, .get_ringparam = sh_eth_get_ringparam, .set_ringparam = sh_eth_set_ringparam, - .get_link_ksettings = sh_eth_get_link_ksettings, + .get_link_ksettings = phy_ethtool_get_link_ksettings, .set_link_ksettings = sh_eth_set_link_ksettings, .get_wol = sh_eth_get_wol, .set_wol = sh_eth_set_wol, -- cgit v1.2.3 From 6783f50ed144aafe8c3aceb223db2c7956278a1f Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Wed, 4 Jul 2018 11:14:49 +0300 Subject: sh_eth: remove custom .set_link_ksettings from ethtool ops The generic phy_ethtool_set_link_ksettings() function from phylib can be used instead of in-house sh_eth_set_link_ksettings(). Signed-off-by: Vladimir Zapolskiy Reviewed-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/sh_eth.c | 11 +---------- 1 file changed, 1 insertion(+), 10 deletions(-) diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c index bd4a0b9c3362..5614fd231bbe 100644 --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -2040,15 +2040,6 @@ static int sh_eth_phy_start(struct net_device *ndev) return 0; } -static int sh_eth_set_link_ksettings(struct net_device *ndev, - const struct ethtool_link_ksettings *cmd) -{ - if (!ndev->phydev) - return -ENODEV; - - return phy_ethtool_ksettings_set(ndev->phydev, cmd); -} - /* If it is ever necessary to increase SH_ETH_REG_DUMP_MAX_REGS, the * version must be bumped as well. Just adding registers up to that * limit is fine, as long as the existing register indices don't @@ -2388,7 +2379,7 @@ static const struct ethtool_ops sh_eth_ethtool_ops = { .get_ringparam = sh_eth_get_ringparam, .set_ringparam = sh_eth_set_ringparam, .get_link_ksettings = phy_ethtool_get_link_ksettings, - .set_link_ksettings = sh_eth_set_link_ksettings, + .set_link_ksettings = phy_ethtool_set_link_ksettings, .get_wol = sh_eth_get_wol, .set_wol = sh_eth_set_wol, }; -- cgit v1.2.3 From 0973a4dd79fe56a3beecfcff675ba4c01df0b0c1 Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Wed, 4 Jul 2018 11:14:50 +0300 Subject: ravb: fix invalid context bug while calling auto-negotiation by ethtool Since commit 35b5f6b1a82b ("PHYLIB: Locking fixes for PHY I/O potentially sleeping") phy_start_aneg() function utilizes a mutex to serialize changes to phy state, however the helper function is called in atomic context. The bug can be reproduced by running "ethtool -r" command, the bug is reported if CONFIG_DEBUG_ATOMIC_SLEEP build option is enabled. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Vladimir Zapolskiy Reviewed-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/ravb_main.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index 68f122140966..e7d6d1b6e7d6 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -1152,15 +1152,10 @@ error_exit: static int ravb_nway_reset(struct net_device *ndev) { - struct ravb_private *priv = netdev_priv(ndev); int error = -ENODEV; - unsigned long flags; - if (ndev->phydev) { - spin_lock_irqsave(&priv->lock, flags); + if (ndev->phydev) error = phy_start_aneg(ndev->phydev); - spin_unlock_irqrestore(&priv->lock, flags); - } return error; } -- cgit v1.2.3 From 05925e52a7d379192a5fdff2c33710f573190ead Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Wed, 4 Jul 2018 11:14:51 +0300 Subject: ravb: fix invalid context bug while changing link options by ethtool The change fixes sleep in atomic context bug, which is encountered every time when link settings are changed by ethtool. Since commit 35b5f6b1a82b ("PHYLIB: Locking fixes for PHY I/O potentially sleeping") phy_start_aneg() function utilizes a mutex to serialize changes to phy state, however that helper function is called in atomic context under a grabbed spinlock, because phy_start_aneg() is called by phy_ethtool_ksettings_set() and by replaced phy_ethtool_sset() helpers from phylib. Now duplex mode setting is enforced in ravb_adjust_link() only, also now RX/TX is disabled when link is put down or modifications to E-MAC registers ECMR and GECMR are expected for both cases of checked and ignored link status pin state from E-MAC interrupt handler. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Vladimir Zapolskiy Reviewed-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/ravb_main.c | 49 ++++++++++---------------------- 1 file changed, 15 insertions(+), 34 deletions(-) diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index e7d6d1b6e7d6..40266fe01186 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -980,6 +980,13 @@ static void ravb_adjust_link(struct net_device *ndev) struct ravb_private *priv = netdev_priv(ndev); struct phy_device *phydev = ndev->phydev; bool new_state = false; + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + + /* Disable TX and RX right over here, if E-MAC change is ignored */ + if (priv->no_avb_link) + ravb_rcv_snd_disable(ndev); if (phydev->link) { if (phydev->duplex != priv->duplex) { @@ -997,18 +1004,21 @@ static void ravb_adjust_link(struct net_device *ndev) ravb_modify(ndev, ECMR, ECMR_TXF, 0); new_state = true; priv->link = phydev->link; - if (priv->no_avb_link) - ravb_rcv_snd_enable(ndev); } } else if (priv->link) { new_state = true; priv->link = 0; priv->speed = 0; priv->duplex = -1; - if (priv->no_avb_link) - ravb_rcv_snd_disable(ndev); } + /* Enable TX and RX right over here, if E-MAC change is ignored */ + if (priv->no_avb_link && phydev->link) + ravb_rcv_snd_enable(ndev); + + mmiowb(); + spin_unlock_irqrestore(&priv->lock, flags); + if (new_state && netif_msg_link(priv)) phy_print_status(phydev); } @@ -1115,39 +1125,10 @@ static int ravb_get_link_ksettings(struct net_device *ndev, static int ravb_set_link_ksettings(struct net_device *ndev, const struct ethtool_link_ksettings *cmd) { - struct ravb_private *priv = netdev_priv(ndev); - unsigned long flags; - int error; - if (!ndev->phydev) return -ENODEV; - spin_lock_irqsave(&priv->lock, flags); - - /* Disable TX and RX */ - ravb_rcv_snd_disable(ndev); - - error = phy_ethtool_ksettings_set(ndev->phydev, cmd); - if (error) - goto error_exit; - - if (cmd->base.duplex == DUPLEX_FULL) - priv->duplex = 1; - else - priv->duplex = 0; - - ravb_set_duplex(ndev); - -error_exit: - mdelay(1); - - /* Enable TX and RX */ - ravb_rcv_snd_enable(ndev); - - mmiowb(); - spin_unlock_irqrestore(&priv->lock, flags); - - return error; + return phy_ethtool_ksettings_set(ndev->phydev, cmd); } static int ravb_nway_reset(struct net_device *ndev) -- cgit v1.2.3 From 2a150c504ac20bd978ae599ba8139e6658d64fd7 Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Wed, 4 Jul 2018 11:16:08 +0300 Subject: ravb: simplify link auto-negotiation by ethtool There is no need to call a heavyweight phy_start_aneg() for phy auto-negotiation by ethtool, the phy is already initialized and link auto-negotiation is started by calling phy_start() from ravb_phy_start() when a network device is opened. Signed-off-by: Vladimir Zapolskiy Reviewed-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/ravb_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index 40266fe01186..31913a469001 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -1136,7 +1136,7 @@ static int ravb_nway_reset(struct net_device *ndev) int error = -ENODEV; if (ndev->phydev) - error = phy_start_aneg(ndev->phydev); + error = phy_restart_aneg(ndev->phydev); return error; } -- cgit v1.2.3 From eeb07284717be2950c3b501df2debc0373eae19a Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Wed, 4 Jul 2018 11:16:09 +0300 Subject: ravb: remove custom .nway_reset from ethtool ops The generic phy_ethtool_nway_reset() function from phylib can be used instead of in-house ravb_nway_reset(). Signed-off-by: Vladimir Zapolskiy Reviewed-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/ravb_main.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-) diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index 31913a469001..6002132093cd 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -1131,16 +1131,6 @@ static int ravb_set_link_ksettings(struct net_device *ndev, return phy_ethtool_ksettings_set(ndev->phydev, cmd); } -static int ravb_nway_reset(struct net_device *ndev) -{ - int error = -ENODEV; - - if (ndev->phydev) - error = phy_restart_aneg(ndev->phydev); - - return error; -} - static u32 ravb_get_msglevel(struct net_device *ndev) { struct ravb_private *priv = netdev_priv(ndev); @@ -1353,7 +1343,7 @@ static int ravb_set_wol(struct net_device *ndev, struct ethtool_wolinfo *wol) } static const struct ethtool_ops ravb_ethtool_ops = { - .nway_reset = ravb_nway_reset, + .nway_reset = phy_ethtool_nway_reset, .get_msglevel = ravb_get_msglevel, .set_msglevel = ravb_set_msglevel, .get_link = ethtool_op_get_link, -- cgit v1.2.3 From efdf75112d89e28c928a22c3a38456b49927f445 Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Wed, 4 Jul 2018 11:16:10 +0300 Subject: ravb: remove useless serialization in ravb_get_link_ksettings() phy_ethtool_ksettings_get() call does not modify device state or device driver state, hence there is no need to utilize a driver specific spinlock. Signed-off-by: Vladimir Zapolskiy Reviewed-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/ravb_main.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index 6002132093cd..772687a5faee 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -1109,15 +1109,10 @@ static int ravb_phy_start(struct net_device *ndev) static int ravb_get_link_ksettings(struct net_device *ndev, struct ethtool_link_ksettings *cmd) { - struct ravb_private *priv = netdev_priv(ndev); - unsigned long flags; - if (!ndev->phydev) return -ENODEV; - spin_lock_irqsave(&priv->lock, flags); phy_ethtool_ksettings_get(ndev->phydev, cmd); - spin_unlock_irqrestore(&priv->lock, flags); return 0; } -- cgit v1.2.3 From 468e40b5fe4fe18e8468dfd03ba4457a9102d066 Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Wed, 4 Jul 2018 11:16:11 +0300 Subject: ravb: remove custom .get_link_ksettings from ethtool ops The generic phy_ethtool_get_link_ksettings() function from phylib can be used instead of in-house ravb_get_link_ksettings(). Signed-off-by: Vladimir Zapolskiy Reviewed-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/ravb_main.c | 13 +------------ 1 file changed, 1 insertion(+), 12 deletions(-) diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index 772687a5faee..9fe01259be6f 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -1106,17 +1106,6 @@ static int ravb_phy_start(struct net_device *ndev) return 0; } -static int ravb_get_link_ksettings(struct net_device *ndev, - struct ethtool_link_ksettings *cmd) -{ - if (!ndev->phydev) - return -ENODEV; - - phy_ethtool_ksettings_get(ndev->phydev, cmd); - - return 0; -} - static int ravb_set_link_ksettings(struct net_device *ndev, const struct ethtool_link_ksettings *cmd) { @@ -1348,7 +1337,7 @@ static const struct ethtool_ops ravb_ethtool_ops = { .get_ringparam = ravb_get_ringparam, .set_ringparam = ravb_set_ringparam, .get_ts_info = ravb_get_ts_info, - .get_link_ksettings = ravb_get_link_ksettings, + .get_link_ksettings = phy_ethtool_get_link_ksettings, .set_link_ksettings = ravb_set_link_ksettings, .get_wol = ravb_get_wol, .set_wol = ravb_set_wol, -- cgit v1.2.3 From 44f3d5581ebbdff59311d45cf862d2e040aeefeb Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Wed, 4 Jul 2018 11:16:12 +0300 Subject: ravb: remove custom .set_link_ksettings from ethtool ops The generic phy_ethtool_set_link_ksettings() function from phylib can be used instead of in-house ravb_set_link_ksettings(). Signed-off-by: Vladimir Zapolskiy Reviewed-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/renesas/ravb_main.c | 11 +---------- 1 file changed, 1 insertion(+), 10 deletions(-) diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index 9fe01259be6f..0d811c02ff34 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -1106,15 +1106,6 @@ static int ravb_phy_start(struct net_device *ndev) return 0; } -static int ravb_set_link_ksettings(struct net_device *ndev, - const struct ethtool_link_ksettings *cmd) -{ - if (!ndev->phydev) - return -ENODEV; - - return phy_ethtool_ksettings_set(ndev->phydev, cmd); -} - static u32 ravb_get_msglevel(struct net_device *ndev) { struct ravb_private *priv = netdev_priv(ndev); @@ -1338,7 +1329,7 @@ static const struct ethtool_ops ravb_ethtool_ops = { .set_ringparam = ravb_set_ringparam, .get_ts_info = ravb_get_ts_info, .get_link_ksettings = phy_ethtool_get_link_ksettings, - .set_link_ksettings = ravb_set_link_ksettings, + .set_link_ksettings = phy_ethtool_set_link_ksettings, .get_wol = ravb_get_wol, .set_wol = ravb_set_wol, }; -- cgit v1.2.3 From 2a57f182420174c7fd4b19db979a2d135231a963 Mon Sep 17 00:00:00 2001 From: Jon Maloy Date: Fri, 6 Jul 2018 20:10:03 +0200 Subject: tipc: fix wrong return value from function tipc_node_try_addr() The function for checking if there is an node address conflict is supposed to return a suggestion for a new address if it finds a conflict, and zero otherwise. But in case the peer being checked is previously unknown it does instead return a "suggestion" for the checked address itself. This results in a DSC_TRIAL_FAIL_MSG being sent unecessarily to the peer, and sometimes makes the trial period starting over again. Fixes: 25b0b9c4e835 ("tipc: handle collisions of 32-bit node address hash values") Signed-off-by: Jon Maloy Signed-off-by: David S. Miller --- net/tipc/node.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/net/tipc/node.c b/net/tipc/node.c index 6a44eb812baf..0453bd451ce8 100644 --- a/net/tipc/node.c +++ b/net/tipc/node.c @@ -797,6 +797,7 @@ static u32 tipc_node_suggest_addr(struct net *net, u32 addr) } /* tipc_node_try_addr(): Check if addr can be used by peer, suggest other if not + * Returns suggested address if any, otherwise 0 */ u32 tipc_node_try_addr(struct net *net, u8 *id, u32 addr) { @@ -819,12 +820,14 @@ u32 tipc_node_try_addr(struct net *net, u8 *id, u32 addr) if (n) { addr = n->addr; tipc_node_put(n); + return addr; } - /* Even this node may be in trial phase */ + + /* Even this node may be in conflict */ if (tn->trial_addr == addr) return tipc_node_suggest_addr(net, addr); - return addr; + return 0; } void tipc_node_check_dest(struct net *net, u32 addr, -- cgit v1.2.3 From e415577f57f4452150642500364cbe5fa6112813 Mon Sep 17 00:00:00 2001 From: Jon Maloy Date: Fri, 6 Jul 2018 20:10:04 +0200 Subject: tipc: correct discovery message handling during address trial period With the duplicate address discovery protocol for tipc nodes addresses we introduced a one second trial period before a node is allocated a hash number to use as address. Unfortunately, we miss to handle the case when a regular LINK REQUEST/ RESPONSE arrives from a cluster node during the trial period. Such messages are not ignored as they should be, leading to links setup attempts while the node still has no address. Fixes: 25b0b9c4e835 ("tipc: handle collisions of 32-bit node address hash values") Signed-off-by: Jon Maloy Signed-off-by: David S. Miller --- net/tipc/discover.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/net/tipc/discover.c b/net/tipc/discover.c index 9f666e0650e2..dcadc10dffd1 100644 --- a/net/tipc/discover.c +++ b/net/tipc/discover.c @@ -133,6 +133,8 @@ static void disc_dupl_alert(struct tipc_bearer *b, u32 node_addr, } /* tipc_disc_addr_trial(): - handle an address uniqueness trial from peer + * Returns true if message should be dropped by caller, i.e., if it is a + * trial message or we are inside trial period. Otherwise false. */ static bool tipc_disc_addr_trial_msg(struct tipc_discoverer *d, struct tipc_media_addr *maddr, @@ -168,8 +170,9 @@ static bool tipc_disc_addr_trial_msg(struct tipc_discoverer *d, msg_set_type(buf_msg(d->skb), DSC_REQ_MSG); } + /* Accept regular link requests/responses only after trial period */ if (mtyp != DSC_TRIAL_MSG) - return false; + return trial; sugg_addr = tipc_node_try_addr(net, peer_id, src); if (sugg_addr) -- cgit v1.2.3 From 92018c7ca959ccd346d6235dac03cf7fc1ba51f7 Mon Sep 17 00:00:00 2001 From: Jon Maloy Date: Fri, 6 Jul 2018 20:10:05 +0200 Subject: tipc: fix correct setting of message type in second discoverer The duplicate address discovery protocol is not safe against two discoverers running in parallel. The one executing first after the trial period is over will set the node address and change its own message type to DSC_REQ_MSG. The one executing last may find that the node address is already set, and never change message type, with the result that its links may never be established. In this commmit we ensure that the message type always is set correctly after the trial period is over. Fixes: 25b0b9c4e835 ("tipc: handle collisions of 32-bit node address hash values") Signed-off-by: Jon Maloy Signed-off-by: David S. Miller --- net/tipc/discover.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/net/tipc/discover.c b/net/tipc/discover.c index dcadc10dffd1..2830709957bd 100644 --- a/net/tipc/discover.c +++ b/net/tipc/discover.c @@ -287,7 +287,6 @@ static void tipc_disc_timeout(struct timer_list *t) { struct tipc_discoverer *d = from_timer(d, t, timer); struct tipc_net *tn = tipc_net(d->net); - u32 self = tipc_own_addr(d->net); struct tipc_media_addr maddr; struct sk_buff *skb = NULL; struct net *net = d->net; @@ -301,12 +300,14 @@ static void tipc_disc_timeout(struct timer_list *t) goto exit; } - /* Did we just leave the address trial period ? */ - if (!self && !time_before(jiffies, tn->addr_trial_end)) { - self = tn->trial_addr; - tipc_net_finalize(net, self); - msg_set_prevnode(buf_msg(d->skb), self); + /* Trial period over ? */ + if (!time_before(jiffies, tn->addr_trial_end)) { + /* Did we just leave it ? */ + if (!tipc_own_addr(net)) + tipc_net_finalize(net, tn->trial_addr); + msg_set_type(buf_msg(d->skb), DSC_REQ_MSG); + msg_set_prevnode(buf_msg(d->skb), tipc_own_addr(net)); } /* Adjust timeout interval according to discovery phase */ -- cgit v1.2.3 From 9faa89d4ed9d7d326f4763d262842270450f9b1f Mon Sep 17 00:00:00 2001 From: Jon Maloy Date: Fri, 6 Jul 2018 20:10:06 +0200 Subject: tipc: make function tipc_net_finalize() thread safe The setting of the node address is not thread safe, meaning that two discoverers may decide to set it simultanously, with a duplicate entry in the name table as result. We fix that with this commit. Fixes: 25b0b9c4e835 ("tipc: handle collisions of 32-bit node address hash values") Signed-off-by: Jon Maloy Signed-off-by: David S. Miller --- net/tipc/net.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/net/tipc/net.c b/net/tipc/net.c index 4fbaa0464405..a7f6964c3a4b 100644 --- a/net/tipc/net.c +++ b/net/tipc/net.c @@ -121,12 +121,17 @@ int tipc_net_init(struct net *net, u8 *node_id, u32 addr) void tipc_net_finalize(struct net *net, u32 addr) { - tipc_set_node_addr(net, addr); - smp_mb(); - tipc_named_reinit(net); - tipc_sk_reinit(net); - tipc_nametbl_publish(net, TIPC_CFG_SRV, addr, addr, - TIPC_CLUSTER_SCOPE, 0, addr); + struct tipc_net *tn = tipc_net(net); + + spin_lock_bh(&tn->node_list_lock); + if (!tipc_own_addr(net)) { + tipc_set_node_addr(net, addr); + tipc_named_reinit(net); + tipc_sk_reinit(net); + tipc_nametbl_publish(net, TIPC_CFG_SRV, addr, addr, + TIPC_CLUSTER_SCOPE, 0, addr); + } + spin_unlock_bh(&tn->node_list_lock); } void tipc_net_stop(struct net *net) -- cgit v1.2.3 From 843789f6dd6ae1651a77ac99c13bcaf191ebe05c Mon Sep 17 00:00:00 2001 From: Casey Leedom Date: Sat, 7 Jul 2018 12:38:07 +0530 Subject: cxgb4: assume flash part size to be 4MB, if it can't be determined t4_get_flash_params() fails in a fatal fashion if the FLASH part isn't one of the recognized parts. But this leads to desperate efforts to update drivers when various FLASH parts which we are using suddenly become unavailable and we need to substitute new FLASH parts. This has lead to more than one Customer Field Emergency when a Customer has an old driver and suddenly can't use newly shipped adapters. This commit fixes this by simply assuming that the FLASH part is 4MB in size if it can't be identified. Note that all Chelsio adapters will have flash parts which are at least 4MB in size. Signed-off-by: Casey Leedom Signed-off-by: Ganesh Goudar Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 35 +++++++++++------------------- 1 file changed, 13 insertions(+), 22 deletions(-) diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c index 974a868a4824..3720c3e11ebb 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c @@ -8702,7 +8702,7 @@ static int t4_get_flash_params(struct adapter *adap) }; unsigned int part, manufacturer; - unsigned int density, size; + unsigned int density, size = 0; u32 flashid = 0; int ret; @@ -8772,11 +8772,6 @@ static int t4_get_flash_params(struct adapter *adap) case 0x22: /* 256MB */ size = 1 << 28; break; - - default: - dev_err(adap->pdev_dev, "Micron Flash Part has bad size, ID = %#x, Density code = %#x\n", - flashid, density); - return -EINVAL; } break; } @@ -8792,10 +8787,6 @@ static int t4_get_flash_params(struct adapter *adap) case 0x17: /* 64MB */ size = 1 << 26; break; - default: - dev_err(adap->pdev_dev, "ISSI Flash Part has bad size, ID = %#x, Density code = %#x\n", - flashid, density); - return -EINVAL; } break; } @@ -8811,10 +8802,6 @@ static int t4_get_flash_params(struct adapter *adap) case 0x18: /* 16MB */ size = 1 << 24; break; - default: - dev_err(adap->pdev_dev, "Macronix Flash Part has bad size, ID = %#x, Density code = %#x\n", - flashid, density); - return -EINVAL; } break; } @@ -8830,17 +8817,21 @@ static int t4_get_flash_params(struct adapter *adap) case 0x18: /* 16MB */ size = 1 << 24; break; - default: - dev_err(adap->pdev_dev, "Winbond Flash Part has bad size, ID = %#x, Density code = %#x\n", - flashid, density); - return -EINVAL; } break; } - default: - dev_err(adap->pdev_dev, "Unsupported Flash Part, ID = %#x\n", - flashid); - return -EINVAL; + } + + /* If we didn't recognize the FLASH part, that's no real issue: the + * Hardware/Software contract says that Hardware will _*ALWAYS*_ + * use a FLASH part which is at least 4MB in size and has 64KB + * sectors. The unrecognized FLASH part is likely to be much larger + * than 4MB, but that's all we really need. + */ + if (size == 0) { + dev_warn(adap->pdev_dev, "Unknown Flash Part, ID = %#x, assuming 4MB\n", + flashid); + size = 1 << 22; } /* Store decoded Flash size and fall through into vetting code. */ -- cgit v1.2.3 From 000244d3dc1f8114e38fe9ee2d9a0986404d9cbe Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 6 Jul 2018 14:44:02 +0200 Subject: net: bridge: fix br_vlan_get_{pvid,info} return values These two functions return the regular -EINVAL failure in the normal code path, but return a nonstandard '-1' error otherwise, which gets interpreted as -EPERM. Let's change it to -EINVAL for the dummy functions as well. Fixes: 4d4fd36126d6 ("net: bridge: Publish bridge accessor functions") Signed-off-by: Arnd Bergmann Acked-by: Nikolay Aleksandrov Signed-off-by: David S. Miller --- include/linux/if_bridge.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/linux/if_bridge.h b/include/linux/if_bridge.h index 7843b98e1c6e..c20c7e197d07 100644 --- a/include/linux/if_bridge.h +++ b/include/linux/if_bridge.h @@ -105,13 +105,13 @@ static inline bool br_vlan_enabled(const struct net_device *dev) static inline int br_vlan_get_pvid(const struct net_device *dev, u16 *p_pvid) { - return -1; + return -EINVAL; } static inline int br_vlan_get_info(const struct net_device *dev, u16 vid, struct bridge_vlan_info *p_vinfo) { - return -1; + return -EINVAL; } #endif -- cgit v1.2.3 From e1bbdd57047454dad068dc36612dd60a57f4c58f Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Thu, 5 Jul 2018 16:15:30 +0200 Subject: net/smc: reduce sock_put() for fallback sockets smc_release() calls a sock_put() for smc fallback sockets to cover the passive closing sock_hold() in __smc_connect() and smc_tcp_listen_work(). This does not make sense for sockets in state SMC_LISTEN and SMC_INIT. An SMC socket stays in state SMC_INIT if connect fails. The sock_put in smc_connect_abort() does not cover all failures. Move it into smc_connect_decline_fallback(). Fixes: ee9dfbef02d18 ("net/smc: handle sockopts forcing fallback") Reported-by: syzbot+3a0748c8f2f210c0ef9b@syzkaller.appspotmail.com Reported-by: syzbot+9e60d2428a42049a592a@syzkaller.appspotmail.com Signed-off-by: Ursula Braun Signed-off-by: David S. Miller --- net/smc/af_smc.c | 15 ++++++++++----- net/smc/smc_close.c | 2 ++ 2 files changed, 12 insertions(+), 5 deletions(-) diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c index e017b6a4452b..5334157f5065 100644 --- a/net/smc/af_smc.c +++ b/net/smc/af_smc.c @@ -147,7 +147,8 @@ static int smc_release(struct socket *sock) smc->clcsock = NULL; } if (smc->use_fallback) { - sock_put(sk); /* passive closing */ + if (sk->sk_state != SMC_LISTEN && sk->sk_state != SMC_INIT) + sock_put(sk); /* passive closing */ sk->sk_state = SMC_CLOSED; sk->sk_state_change(sk); } @@ -417,12 +418,18 @@ static int smc_connect_decline_fallback(struct smc_sock *smc, int reason_code) { int rc; - if (reason_code < 0) /* error, fallback is not possible */ + if (reason_code < 0) { /* error, fallback is not possible */ + if (smc->sk.sk_state == SMC_INIT) + sock_put(&smc->sk); /* passive closing */ return reason_code; + } if (reason_code != SMC_CLC_DECL_REPLY) { rc = smc_clc_send_decline(smc, reason_code); - if (rc < 0) + if (rc < 0) { + if (smc->sk.sk_state == SMC_INIT) + sock_put(&smc->sk); /* passive closing */ return rc; + } } return smc_connect_fallback(smc); } @@ -435,8 +442,6 @@ static int smc_connect_abort(struct smc_sock *smc, int reason_code, smc_lgr_forget(smc->conn.lgr); mutex_unlock(&smc_create_lgr_pending); smc_conn_free(&smc->conn); - if (reason_code < 0 && smc->sk.sk_state == SMC_INIT) - sock_put(&smc->sk); /* passive closing */ return reason_code; } diff --git a/net/smc/smc_close.c b/net/smc/smc_close.c index fa41d9881741..ac961dfb1ea1 100644 --- a/net/smc/smc_close.c +++ b/net/smc/smc_close.c @@ -107,6 +107,8 @@ static void smc_close_active_abort(struct smc_sock *smc) } switch (sk->sk_state) { case SMC_INIT: + sk->sk_state = SMC_PEERABORTWAIT; + break; case SMC_ACTIVE: sk->sk_state = SMC_PEERABORTWAIT; release_sock(sk); -- cgit v1.2.3 From e50b770ea5c9eff0013e8ae714d20182ed50d5e6 Mon Sep 17 00:00:00 2001 From: Harini Katakam Date: Fri, 6 Jul 2018 12:18:57 +0530 Subject: net: macb: Free RX ring for all queues rx ring is allocated for all queues in macb_alloc_consistent. Free the same for all queues instead of just Q0. Signed-off-by: Harini Katakam Reviewed-by: Claudiu Beznea Signed-off-by: David S. Miller --- drivers/net/ethernet/cadence/macb_main.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c index 96cc03a6d942..2d5d0d110151 100644 --- a/drivers/net/ethernet/cadence/macb_main.c +++ b/drivers/net/ethernet/cadence/macb_main.c @@ -1812,13 +1812,7 @@ static void macb_free_consistent(struct macb *bp) struct macb_queue *queue; unsigned int q; - queue = &bp->queues[0]; bp->macbgem_ops.mog_free_rx_buffers(bp); - if (queue->rx_ring) { - dma_free_coherent(&bp->pdev->dev, RX_RING_BYTES(bp), - queue->rx_ring, queue->rx_ring_dma); - queue->rx_ring = NULL; - } for (q = 0, queue = bp->queues; q < bp->num_queues; ++q, ++queue) { kfree(queue->tx_skb); @@ -1828,6 +1822,11 @@ static void macb_free_consistent(struct macb *bp) queue->tx_ring, queue->tx_ring_dma); queue->tx_ring = NULL; } + if (queue->rx_ring) { + dma_free_coherent(&bp->pdev->dev, RX_RING_BYTES(bp), + queue->rx_ring, queue->rx_ring_dma); + queue->rx_ring = NULL; + } } } -- cgit v1.2.3 From 404cd086f29e867fc99f1174e8f3246a4ea14b7b Mon Sep 17 00:00:00 2001 From: Harini Katakam Date: Fri, 6 Jul 2018 12:18:58 +0530 Subject: net: macb: Allocate valid memory for TX and RX BD prefetch GEM version in ZynqMP and most versions greater than r1p07 supports TX and RX BD prefetch. The number of BDs that can be prefetched is a HW configurable parameter. For ZynqMP, this parameter is 4. When GEM DMA is accessing the last BD in the ring, even before the BD is processed and the WRAP bit is noticed, it will have prefetched BDs outside the BD ring. These will not be processed but it is necessary to have accessible memory after the last BD. Especially in cases where SMMU is used, memory locations immediately after the last BD may not have translation tables triggering HRESP errors. Hence always allocate extra BDs to accommodate for prefetch. The value of tx/rx bd prefetch for any given SoC version is: 2 ^ (corresponding field in design config 10 register). (value of this field >= 1) Added a capability flag so that older IP versions that do not have DCFG10 or this prefetch capability are not affected. Signed-off-by: Harini Katakam Reviewed-by: Claudiu Beznea Signed-off-by: David S. Miller --- drivers/net/ethernet/cadence/macb.h | 11 +++++++++++ drivers/net/ethernet/cadence/macb_main.c | 27 +++++++++++++++++++++------ 2 files changed, 32 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h index 86659823b259..3d45f4c92cf6 100644 --- a/drivers/net/ethernet/cadence/macb.h +++ b/drivers/net/ethernet/cadence/macb.h @@ -166,6 +166,7 @@ #define GEM_DCFG6 0x0294 /* Design Config 6 */ #define GEM_DCFG7 0x0298 /* Design Config 7 */ #define GEM_DCFG8 0x029C /* Design Config 8 */ +#define GEM_DCFG10 0x02A4 /* Design Config 10 */ #define GEM_TXBDCTRL 0x04cc /* TX Buffer Descriptor control register */ #define GEM_RXBDCTRL 0x04d0 /* RX Buffer Descriptor control register */ @@ -490,6 +491,12 @@ #define GEM_SCR2CMP_OFFSET 0 #define GEM_SCR2CMP_SIZE 8 +/* Bitfields in DCFG10 */ +#define GEM_TXBD_RDBUFF_OFFSET 12 +#define GEM_TXBD_RDBUFF_SIZE 4 +#define GEM_RXBD_RDBUFF_OFFSET 8 +#define GEM_RXBD_RDBUFF_SIZE 4 + /* Bitfields in TISUBN */ #define GEM_SUBNSINCR_OFFSET 0 #define GEM_SUBNSINCR_SIZE 16 @@ -635,6 +642,7 @@ #define MACB_CAPS_USRIO_DISABLED 0x00000010 #define MACB_CAPS_JUMBO 0x00000020 #define MACB_CAPS_GEM_HAS_PTP 0x00000040 +#define MACB_CAPS_BD_RD_PREFETCH 0x00000080 #define MACB_CAPS_FIFO_MODE 0x10000000 #define MACB_CAPS_GIGABIT_MODE_AVAILABLE 0x20000000 #define MACB_CAPS_SG_DISABLED 0x40000000 @@ -1203,6 +1211,9 @@ struct macb { unsigned int max_tuples; struct tasklet_struct hresp_err_tasklet; + + int rx_bd_rd_prefetch; + int tx_bd_rd_prefetch; }; #ifdef CONFIG_MACB_USE_HWSTAMP diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c index 2d5d0d110151..a6c911bb5ce2 100644 --- a/drivers/net/ethernet/cadence/macb_main.c +++ b/drivers/net/ethernet/cadence/macb_main.c @@ -1811,6 +1811,7 @@ static void macb_free_consistent(struct macb *bp) { struct macb_queue *queue; unsigned int q; + int size; bp->macbgem_ops.mog_free_rx_buffers(bp); @@ -1818,12 +1819,14 @@ static void macb_free_consistent(struct macb *bp) kfree(queue->tx_skb); queue->tx_skb = NULL; if (queue->tx_ring) { - dma_free_coherent(&bp->pdev->dev, TX_RING_BYTES(bp), + size = TX_RING_BYTES(bp) + bp->tx_bd_rd_prefetch; + dma_free_coherent(&bp->pdev->dev, size, queue->tx_ring, queue->tx_ring_dma); queue->tx_ring = NULL; } if (queue->rx_ring) { - dma_free_coherent(&bp->pdev->dev, RX_RING_BYTES(bp), + size = RX_RING_BYTES(bp) + bp->rx_bd_rd_prefetch; + dma_free_coherent(&bp->pdev->dev, size, queue->rx_ring, queue->rx_ring_dma); queue->rx_ring = NULL; } @@ -1873,7 +1876,7 @@ static int macb_alloc_consistent(struct macb *bp) int size; for (q = 0, queue = bp->queues; q < bp->num_queues; ++q, ++queue) { - size = TX_RING_BYTES(bp); + size = TX_RING_BYTES(bp) + bp->tx_bd_rd_prefetch; queue->tx_ring = dma_alloc_coherent(&bp->pdev->dev, size, &queue->tx_ring_dma, GFP_KERNEL); @@ -1889,7 +1892,7 @@ static int macb_alloc_consistent(struct macb *bp) if (!queue->tx_skb) goto out_err; - size = RX_RING_BYTES(bp); + size = RX_RING_BYTES(bp) + bp->rx_bd_rd_prefetch; queue->rx_ring = dma_alloc_coherent(&bp->pdev->dev, size, &queue->rx_ring_dma, GFP_KERNEL); if (!queue->rx_ring) @@ -3796,7 +3799,7 @@ static const struct macb_config np4_config = { static const struct macb_config zynqmp_config = { .caps = MACB_CAPS_GIGABIT_MODE_AVAILABLE | MACB_CAPS_JUMBO | - MACB_CAPS_GEM_HAS_PTP, + MACB_CAPS_GEM_HAS_PTP | MACB_CAPS_BD_RD_PREFETCH, .dma_burst_length = 16, .clk_init = macb_clk_init, .init = macb_init, @@ -3857,7 +3860,7 @@ static int macb_probe(struct platform_device *pdev) void __iomem *mem; const char *mac; struct macb *bp; - int err; + int err, val; regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); mem = devm_ioremap_resource(&pdev->dev, regs); @@ -3946,6 +3949,18 @@ static int macb_probe(struct platform_device *pdev) else dev->max_mtu = ETH_DATA_LEN; + if (bp->caps & MACB_CAPS_BD_RD_PREFETCH) { + val = GEM_BFEXT(RXBD_RDBUFF, gem_readl(bp, DCFG10)); + if (val) + bp->rx_bd_rd_prefetch = (2 << (val - 1)) * + macb_dma_desc_get_size(bp); + + val = GEM_BFEXT(TXBD_RDBUFF, gem_readl(bp, DCFG10)); + if (val) + bp->tx_bd_rd_prefetch = (2 << (val - 1)) * + macb_dma_desc_get_size(bp); + } + mac = of_get_mac_address(np); if (mac) { ether_addr_copy(bp->dev->dev_addr, mac); -- cgit v1.2.3 From 11a245e2f7bf25fc21f47e4c9c8491841b128890 Mon Sep 17 00:00:00 2001 From: Davide Caratti Date: Fri, 6 Jul 2018 21:01:05 +0200 Subject: net/sched: act_csum: fix NULL dereference when 'goto chain' is used the control action in the common member of struct tcf_csum must be a valid value, as it can contain the chain index when 'goto chain' is used. Ensure that the control action can be read as x->tcfa_action, when x is a pointer to struct tc_action and x->ops->type is TCA_ACT_CSUM, to prevent the following command: # tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ > $tcflags dst_mac $h2mac action csum ip or tcp or udp or sctp goto chain 1 from triggering a NULL pointer dereference when a matching packet is received. BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 800000010416b067 P4D 800000010416b067 PUD 1041be067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 3072 Comm: mausezahn Tainted: G E 4.18.0-rc2.auguri+ #421 Hardware name: Hewlett-Packard HP Z220 CMT Workstation/1790, BIOS K51 v01.58 02/07/2013 RIP: 0010:tcf_action_exec+0xb8/0x100 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 RSP: 0018:ffffa020dea03c40 EFLAGS: 00010246 RAX: 0000000020000001 RBX: ffffa020d7ccef00 RCX: 0000000000000054 RDX: 0000000000000000 RSI: ffffa020ca5ae000 RDI: ffffa020d7ccef00 RBP: ffffa020dea03e60 R08: 0000000000000000 R09: ffffa020dea03c9c R10: ffffa020dea03c78 R11: 0000000000000008 R12: ffffa020d3fe4f00 R13: ffffa020d3fe4f08 R14: 0000000000000001 R15: ffffa020d53ca300 FS: 00007f5a46942740(0000) GS:ffffa020dea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000104218002 CR4: 00000000001606f0 Call Trace: fl_classify+0x1ad/0x1c0 [cls_flower] ? arp_rcv+0x121/0x1b0 ? __x2apic_send_IPI_dest+0x40/0x40 ? smp_reschedule_interrupt+0x1c/0xd0 ? reschedule_interrupt+0xf/0x20 ? reschedule_interrupt+0xa/0x20 ? device_is_rmrr_locked+0xe/0x50 ? iommu_should_identity_map+0x49/0xd0 ? __intel_map_single+0x30/0x140 ? e1000e_update_rdt_wa.isra.52+0x22/0xb0 [e1000e] ? e1000_alloc_rx_buffers+0x233/0x250 [e1000e] ? kmem_cache_alloc+0x38/0x1c0 tcf_classify+0x89/0x140 __netif_receive_skb_core+0x5ea/0xb70 ? enqueue_task_fair+0xb6/0x7d0 ? process_backlog+0x97/0x150 process_backlog+0x97/0x150 net_rx_action+0x14b/0x3e0 __do_softirq+0xde/0x2b4 do_softirq_own_stack+0x2a/0x40 do_softirq.part.18+0x49/0x50 __local_bh_enable_ip+0x49/0x50 __dev_queue_xmit+0x4ab/0x8a0 ? wait_woken+0x80/0x80 ? packet_sendmsg+0x38f/0x810 ? __dev_queue_xmit+0x8a0/0x8a0 packet_sendmsg+0x38f/0x810 sock_sendmsg+0x36/0x40 __sys_sendto+0x10e/0x140 ? do_vfs_ioctl+0xa4/0x630 ? syscall_trace_enter+0x1df/0x2e0 ? __audit_syscall_exit+0x22a/0x290 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x5b/0x180 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f5a45cbec93 Code: 48 8b 0d 18 83 20 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 59 c7 20 00 00 75 13 49 89 ca b8 2c 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 34 c3 48 83 ec 08 e8 2b f7 ff ff 48 89 04 24 RSP: 002b:00007ffd0ee6d748 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000001161010 RCX: 00007f5a45cbec93 RDX: 0000000000000062 RSI: 0000000001161322 RDI: 0000000000000003 RBP: 00007ffd0ee6d780 R08: 00007ffd0ee6d760 R09: 0000000000000014 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000062 R13: 0000000001161322 R14: 00007ffd0ee6d760 R15: 0000000000000003 Modules linked in: act_csum act_gact cls_flower sch_ingress vrf veth act_tunnel_key(E) xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel snd_hda_codec_hdmi snd_hda_codec_realtek kvm snd_hda_codec_generic hp_wmi iTCO_wdt sparse_keymap rfkill mei_wdt iTCO_vendor_support wmi_bmof gpio_ich irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel snd_hda_intel crypto_simd cryptd snd_hda_codec glue_helper snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm pcspkr i2c_i801 snd_timer snd sg lpc_ich soundcore wmi mei_me mei ie31200_edac nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c sr_mod cdrom sd_mod ahci libahci crc32c_intel i915 ixgbe serio_raw libata video dca i2c_algo_bit sfc drm_kms_helper syscopyarea mtd sysfillrect mdio sysimgblt fb_sys_fops drm e1000e i2c_core CR2: 0000000000000000 ---[ end trace 3c9e9d1a77df4026 ]--- RIP: 0010:tcf_action_exec+0xb8/0x100 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 RSP: 0018:ffffa020dea03c40 EFLAGS: 00010246 RAX: 0000000020000001 RBX: ffffa020d7ccef00 RCX: 0000000000000054 RDX: 0000000000000000 RSI: ffffa020ca5ae000 RDI: ffffa020d7ccef00 RBP: ffffa020dea03e60 R08: 0000000000000000 R09: ffffa020dea03c9c R10: ffffa020dea03c78 R11: 0000000000000008 R12: ffffa020d3fe4f00 R13: ffffa020d3fe4f08 R14: 0000000000000001 R15: ffffa020d53ca300 FS: 00007f5a46942740(0000) GS:ffffa020dea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000104218002 CR4: 00000000001606f0 Kernel panic - not syncing: Fatal exception in interrupt Kernel Offset: 0x26400000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Fixes: 9c5f69bbd75a ("net/sched: act_csum: don't use spinlock in the fast path") Signed-off-by: Davide Caratti Signed-off-by: David S. Miller --- include/net/tc_act/tc_csum.h | 1 - net/sched/act_csum.c | 6 +++--- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/include/net/tc_act/tc_csum.h b/include/net/tc_act/tc_csum.h index 9470fd7e4350..32d2454c0479 100644 --- a/include/net/tc_act/tc_csum.h +++ b/include/net/tc_act/tc_csum.h @@ -7,7 +7,6 @@ #include struct tcf_csum_params { - int action; u32 update_flags; struct rcu_head rcu; }; diff --git a/net/sched/act_csum.c b/net/sched/act_csum.c index 526a8e491626..6e7124e57918 100644 --- a/net/sched/act_csum.c +++ b/net/sched/act_csum.c @@ -91,7 +91,7 @@ static int tcf_csum_init(struct net *net, struct nlattr *nla, } params_old = rtnl_dereference(p->params); - params_new->action = parm->action; + p->tcf_action = parm->action; params_new->update_flags = parm->update_flags; rcu_assign_pointer(p->params, params_new); if (params_old) @@ -561,7 +561,7 @@ static int tcf_csum(struct sk_buff *skb, const struct tc_action *a, tcf_lastuse_update(&p->tcf_tm); bstats_cpu_update(this_cpu_ptr(p->common.cpu_bstats), skb); - action = params->action; + action = READ_ONCE(p->tcf_action); if (unlikely(action == TC_ACT_SHOT)) goto drop_stats; @@ -599,11 +599,11 @@ static int tcf_csum_dump(struct sk_buff *skb, struct tc_action *a, int bind, .index = p->tcf_index, .refcnt = p->tcf_refcnt - ref, .bindcnt = p->tcf_bindcnt - bind, + .action = p->tcf_action, }; struct tcf_t t; params = rtnl_dereference(p->params); - opt.action = params->action; opt.update_flags = params->update_flags; if (nla_put(skb, TCA_CSUM_PARMS, sizeof(opt), &opt)) -- cgit v1.2.3 From 38230a3e0e0933bbcf5df6fa469ba0667f667568 Mon Sep 17 00:00:00 2001 From: Davide Caratti Date: Fri, 6 Jul 2018 21:01:06 +0200 Subject: net/sched: act_tunnel_key: fix NULL dereference when 'goto chain' is used the control action in the common member of struct tcf_tunnel_key must be a valid value, as it can contain the chain index when 'goto chain' is used. Ensure that the control action can be read as x->tcfa_action, when x is a pointer to struct tc_action and x->ops->type is TCA_ACT_TUNNEL_KEY, to prevent the following command: # tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \ > $tcflags dst_mac $h2mac action tunnel_key unset goto chain 1 from causing a NULL dereference when a matching packet is received: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 80000001097ac067 P4D 80000001097ac067 PUD 103b0a067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 3491 Comm: mausezahn Tainted: G E 4.18.0-rc2.auguri+ #421 Hardware name: Hewlett-Packard HP Z220 CMT Workstation/1790, BIOS K51 v01.58 02/07/2013 RIP: 0010:tcf_action_exec+0xb8/0x100 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 RSP: 0018:ffff95145ea03c40 EFLAGS: 00010246 RAX: 0000000020000001 RBX: ffff9514499e5800 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000002 RDI: 0000000000000000 RBP: ffff95145ea03e60 R08: 0000000000000000 R09: ffff95145ea03c9c R10: ffff95145ea03c78 R11: 0000000000000008 R12: ffff951456a69800 R13: ffff951456a69808 R14: 0000000000000001 R15: ffff95144965ee40 FS: 00007fd67ee11740(0000) GS:ffff95145ea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001038a2006 CR4: 00000000001606f0 Call Trace: fl_classify+0x1ad/0x1c0 [cls_flower] ? __update_load_avg_se.isra.47+0x1ca/0x1d0 ? __update_load_avg_se.isra.47+0x1ca/0x1d0 ? update_load_avg+0x665/0x690 ? update_load_avg+0x665/0x690 ? kmem_cache_alloc+0x38/0x1c0 tcf_classify+0x89/0x140 __netif_receive_skb_core+0x5ea/0xb70 ? enqueue_entity+0xd0/0x270 ? process_backlog+0x97/0x150 process_backlog+0x97/0x150 net_rx_action+0x14b/0x3e0 __do_softirq+0xde/0x2b4 do_softirq_own_stack+0x2a/0x40 do_softirq.part.18+0x49/0x50 __local_bh_enable_ip+0x49/0x50 __dev_queue_xmit+0x4ab/0x8a0 ? wait_woken+0x80/0x80 ? packet_sendmsg+0x38f/0x810 ? __dev_queue_xmit+0x8a0/0x8a0 packet_sendmsg+0x38f/0x810 sock_sendmsg+0x36/0x40 __sys_sendto+0x10e/0x140 ? do_vfs_ioctl+0xa4/0x630 ? syscall_trace_enter+0x1df/0x2e0 ? __audit_syscall_exit+0x22a/0x290 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x5b/0x180 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fd67e18dc93 Code: 48 8b 0d 18 83 20 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 59 c7 20 00 00 75 13 49 89 ca b8 2c 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 34 c3 48 83 ec 08 e8 2b f7 ff ff 48 89 04 24 RSP: 002b:00007ffe0189b748 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00000000020ca010 RCX: 00007fd67e18dc93 RDX: 0000000000000062 RSI: 00000000020ca322 RDI: 0000000000000003 RBP: 00007ffe0189b780 R08: 00007ffe0189b760 R09: 0000000000000014 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000062 R13: 00000000020ca322 R14: 00007ffe0189b760 R15: 0000000000000003 Modules linked in: act_tunnel_key act_gact cls_flower sch_ingress vrf veth act_csum(E) xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter intel_rapl snd_hda_codec_hdmi x86_pkg_temp_thermal intel_powerclamp snd_hda_codec_realtek coretemp snd_hda_codec_generic kvm_intel kvm irqbypass snd_hda_intel crct10dif_pclmul crc32_pclmul hp_wmi ghash_clmulni_intel pcbc snd_hda_codec aesni_intel sparse_keymap rfkill snd_hda_core snd_hwdep snd_seq crypto_simd iTCO_wdt gpio_ich iTCO_vendor_support wmi_bmof cryptd mei_wdt glue_helper snd_seq_device snd_pcm pcspkr snd_timer snd i2c_i801 lpc_ich sg soundcore wmi mei_me mei ie31200_edac nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c sd_mod sr_mod cdrom i915 video i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ahci crc32c_intel libahci serio_raw sfc libata mtd drm ixgbe mdio i2c_core e1000e dca CR2: 0000000000000000 ---[ end trace 1ab8b5b5d4639dfc ]--- RIP: 0010:tcf_action_exec+0xb8/0x100 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 RSP: 0018:ffff95145ea03c40 EFLAGS: 00010246 RAX: 0000000020000001 RBX: ffff9514499e5800 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000002 RDI: 0000000000000000 RBP: ffff95145ea03e60 R08: 0000000000000000 R09: ffff95145ea03c9c R10: ffff95145ea03c78 R11: 0000000000000008 R12: ffff951456a69800 R13: ffff951456a69808 R14: 0000000000000001 R15: ffff95144965ee40 FS: 00007fd67ee11740(0000) GS:ffff95145ea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001038a2006 CR4: 00000000001606f0 Kernel panic - not syncing: Fatal exception in interrupt Kernel Offset: 0x11400000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Fixes: d0f6dd8a914f ("net/sched: Introduce act_tunnel_key") Signed-off-by: Davide Caratti Signed-off-by: David S. Miller --- include/net/tc_act/tc_tunnel_key.h | 1 - net/sched/act_tunnel_key.c | 6 +++--- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/include/net/tc_act/tc_tunnel_key.h b/include/net/tc_act/tc_tunnel_key.h index efef0b4b1b2b..46b8c7f1c8d5 100644 --- a/include/net/tc_act/tc_tunnel_key.h +++ b/include/net/tc_act/tc_tunnel_key.h @@ -18,7 +18,6 @@ struct tcf_tunnel_key_params { struct rcu_head rcu; int tcft_action; - int action; struct metadata_dst *tcft_enc_metadata; }; diff --git a/net/sched/act_tunnel_key.c b/net/sched/act_tunnel_key.c index 626dac81a48a..9bc6c2ae98a5 100644 --- a/net/sched/act_tunnel_key.c +++ b/net/sched/act_tunnel_key.c @@ -36,7 +36,7 @@ static int tunnel_key_act(struct sk_buff *skb, const struct tc_action *a, tcf_lastuse_update(&t->tcf_tm); bstats_cpu_update(this_cpu_ptr(t->common.cpu_bstats), skb); - action = params->action; + action = READ_ONCE(t->tcf_action); switch (params->tcft_action) { case TCA_TUNNEL_KEY_ACT_RELEASE: @@ -182,7 +182,7 @@ static int tunnel_key_init(struct net *net, struct nlattr *nla, params_old = rtnl_dereference(t->params); - params_new->action = parm->action; + t->tcf_action = parm->action; params_new->tcft_action = parm->t_action; params_new->tcft_enc_metadata = metadata; @@ -254,13 +254,13 @@ static int tunnel_key_dump(struct sk_buff *skb, struct tc_action *a, .index = t->tcf_index, .refcnt = t->tcf_refcnt - ref, .bindcnt = t->tcf_bindcnt - bind, + .action = t->tcf_action, }; struct tcf_t tm; params = rtnl_dereference(t->params); opt.t_action = params->tcft_action; - opt.action = params->action; if (nla_put(skb, TCA_TUNNEL_KEY_PARMS, sizeof(opt), &opt)) goto nla_put_failure; -- cgit v1.2.3 From 547b3aa451ae2739585547db9fbdee11a43ff999 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Thu, 5 Jul 2018 08:05:56 -0700 Subject: bpf: sockmap, error path can not release psock in multi-map case The current code, in the error path of sock_hash_ctx_update_elem, checks if the sock has a psock in the user data and if so decrements the reference count of the psock. However, if the error happens early in the error path we may have never incremented the psock reference count and if the psock exists because the sock is in another map then we may inadvertently decrement the reference count. Fix this by making the error path only call smap_release_sock if the error happens after the increment. Reported-by: syzbot+d464d2c20c717ef5a6a8@syzkaller.appspotmail.com Fixes: 81110384441a ("bpf: sockmap, add hash map support") Signed-off-by: John Fastabend Signed-off-by: Alexei Starovoitov --- kernel/bpf/sockmap.c | 17 ++++++----------- 1 file changed, 6 insertions(+), 11 deletions(-) diff --git a/kernel/bpf/sockmap.c b/kernel/bpf/sockmap.c index cf7b6a6dbd1f..3847a7ce7dae 100644 --- a/kernel/bpf/sockmap.c +++ b/kernel/bpf/sockmap.c @@ -1896,7 +1896,7 @@ static int __sock_map_ctx_update_elem(struct bpf_map *map, e = kzalloc(sizeof(*e), GFP_ATOMIC | __GFP_NOWARN); if (!e) { err = -ENOMEM; - goto out_progs; + goto out_free; } } @@ -2342,7 +2342,10 @@ static int sock_hash_ctx_update_elem(struct bpf_sock_ops_kern *skops, if (err) goto err; - /* bpf_map_update_elem() can be called in_irq() */ + /* psock is valid here because otherwise above *ctx_update_elem would + * have thrown an error. It is safe to skip error check. + */ + psock = smap_psock_sk(sock); raw_spin_lock_bh(&b->lock); l_old = lookup_elem_raw(head, hash, key, key_size); if (l_old && map_flags == BPF_NOEXIST) { @@ -2360,12 +2363,6 @@ static int sock_hash_ctx_update_elem(struct bpf_sock_ops_kern *skops, goto bucket_err; } - psock = smap_psock_sk(sock); - if (unlikely(!psock)) { - err = -EINVAL; - goto bucket_err; - } - rcu_assign_pointer(e->hash_link, l_new); rcu_assign_pointer(e->htab, container_of(map, struct bpf_htab, map)); @@ -2388,12 +2385,10 @@ static int sock_hash_ctx_update_elem(struct bpf_sock_ops_kern *skops, raw_spin_unlock_bh(&b->lock); return 0; bucket_err: + smap_release_sock(psock, sock); raw_spin_unlock_bh(&b->lock); err: kfree(e); - psock = smap_psock_sk(sock); - if (psock) - smap_release_sock(psock, sock); return err; } -- cgit v1.2.3 From 1d1ef005dbc6de673c62cbd2562290ada3090463 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Thu, 5 Jul 2018 08:06:01 -0700 Subject: bpf: sockmap, hash table is RCU so readers do not need locks This removes locking from readers of RCU hash table. Its not necessary. Fixes: 81110384441a ("bpf: sockmap, add hash map support") Signed-off-by: John Fastabend Signed-off-by: Alexei Starovoitov --- kernel/bpf/sockmap.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/kernel/bpf/sockmap.c b/kernel/bpf/sockmap.c index 3847a7ce7dae..00fb2e328d1b 100644 --- a/kernel/bpf/sockmap.c +++ b/kernel/bpf/sockmap.c @@ -2467,10 +2467,8 @@ struct sock *__sock_hash_lookup_elem(struct bpf_map *map, void *key) b = __select_bucket(htab, hash); head = &b->head; - raw_spin_lock_bh(&b->lock); l = lookup_elem_raw(head, hash, key, key_size); sk = l ? l->sk : NULL; - raw_spin_unlock_bh(&b->lock); return sk; } -- cgit v1.2.3 From 0c6bc6e531a6db36f49622f1f115770160f7afb0 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Thu, 5 Jul 2018 08:49:59 -0700 Subject: bpf: fix sk_skb programs without skb->dev assigned Multiple BPF helpers in use by sk_skb programs calculate the max skb length using the __bpf_skb_max_len function. However, this calculates the max length using the skb->dev pointer which can be NULL when an sk_skb program is paired with an sk_msg program. To force this a sk_msg program needs to redirect into the ingress path of a sock with an attach sk_skb program. Then the the sk_skb program would need to call one of the helpers that adjust the skb size. To fix the null ptr dereference use SKB_MAX_ALLOC size if no dev is available. Fixes: 8934ce2fd081 ("bpf: sockmap redirect ingress support") Signed-off-by: John Fastabend Signed-off-by: Alexei Starovoitov --- net/core/filter.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/core/filter.c b/net/core/filter.c index 0ca6907d7efe..3095f1ba7015 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -2779,7 +2779,8 @@ static int bpf_skb_net_shrink(struct sk_buff *skb, u32 len_diff) static u32 __bpf_skb_max_len(const struct sk_buff *skb) { - return skb->dev->mtu + skb->dev->hard_header_len; + return skb->dev ? skb->dev->mtu + skb->dev->hard_header_len : + SKB_MAX_ALLOC; } static int bpf_skb_adjust_net(struct sk_buff *skb, s32 len_diff) -- cgit v1.2.3 From 99ba2b5aba24e022683a7db63204f9e306fe7ab9 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Thu, 5 Jul 2018 08:50:04 -0700 Subject: bpf: sockhash, disallow bpf_tcp_close and update in parallel After latest lock updates there is no longer anything preventing a close and recvmsg call running in parallel. Additionally, we can race update with close if we close a socket and simultaneously update if via the BPF userspace API (note the cgroup ops are already run with sock_lock held). To resolve this take sock_lock in close and update paths. Reported-by: syzbot+b680e42077a0d7c9a0c4@syzkaller.appspotmail.com Fixes: e9db4ef6bf4c ("bpf: sockhash fix omitted bucket lock in sock_close") Signed-off-by: John Fastabend Signed-off-by: Alexei Starovoitov --- kernel/bpf/sockmap.c | 15 +++++++++++++++ kernel/bpf/syscall.c | 4 +++- 2 files changed, 18 insertions(+), 1 deletion(-) diff --git a/kernel/bpf/sockmap.c b/kernel/bpf/sockmap.c index 00fb2e328d1b..9c67e96fe336 100644 --- a/kernel/bpf/sockmap.c +++ b/kernel/bpf/sockmap.c @@ -312,10 +312,12 @@ static void bpf_tcp_close(struct sock *sk, long timeout) struct smap_psock *psock; struct sock *osk; + lock_sock(sk); rcu_read_lock(); psock = smap_psock_sk(sk); if (unlikely(!psock)) { rcu_read_unlock(); + release_sock(sk); return sk->sk_prot->close(sk, timeout); } @@ -371,6 +373,7 @@ static void bpf_tcp_close(struct sock *sk, long timeout) e = psock_map_pop(sk, psock); } rcu_read_unlock(); + release_sock(sk); close_fun(sk, timeout); } @@ -2069,7 +2072,13 @@ static int sock_map_update_elem(struct bpf_map *map, return -EOPNOTSUPP; } + lock_sock(skops.sk); + preempt_disable(); + rcu_read_lock(); err = sock_map_ctx_update_elem(&skops, map, key, flags); + rcu_read_unlock(); + preempt_enable(); + release_sock(skops.sk); fput(socket->file); return err; } @@ -2410,7 +2419,13 @@ static int sock_hash_update_elem(struct bpf_map *map, return -EINVAL; } + lock_sock(skops.sk); + preempt_disable(); + rcu_read_lock(); err = sock_hash_ctx_update_elem(&skops, map, key, flags); + rcu_read_unlock(); + preempt_enable(); + release_sock(skops.sk); fput(socket->file); return err; } diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c index d10ecd78105f..a31a1ba0f8ea 100644 --- a/kernel/bpf/syscall.c +++ b/kernel/bpf/syscall.c @@ -735,7 +735,9 @@ static int map_update_elem(union bpf_attr *attr) if (bpf_map_is_dev_bound(map)) { err = bpf_map_offload_update_elem(map, key, value, attr->flags); goto out; - } else if (map->map_type == BPF_MAP_TYPE_CPUMAP) { + } else if (map->map_type == BPF_MAP_TYPE_CPUMAP || + map->map_type == BPF_MAP_TYPE_SOCKHASH || + map->map_type == BPF_MAP_TYPE_SOCKMAP) { err = map->ops->map_update_elem(map, key, value, attr->flags); goto out; } -- cgit v1.2.3 From 7ebc14d507b4b55105da8d1a1eda323381529cc7 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Thu, 5 Jul 2018 08:50:10 -0700 Subject: bpf: sockmap, consume_skb in close path Currently, when a sock is closed and the bpf_tcp_close() callback is used we remove memory but do not free the skb. Call consume_skb() if the skb is attached to the buffer. Reported-by: syzbot+d464d2c20c717ef5a6a8@syzkaller.appspotmail.com Fixes: 1aa12bdf1bfb ("bpf: sockmap, add sock close() hook to remove socks") Signed-off-by: John Fastabend Signed-off-by: Alexei Starovoitov --- kernel/bpf/sockmap.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/kernel/bpf/sockmap.c b/kernel/bpf/sockmap.c index 9c67e96fe336..dfc8a8a07c1f 100644 --- a/kernel/bpf/sockmap.c +++ b/kernel/bpf/sockmap.c @@ -571,7 +571,8 @@ static int free_sg(struct sock *sk, int start, struct sk_msg_buff *md) while (sg[i].length) { free += sg[i].length; sk_mem_uncharge(sk, sg[i].length); - put_page(sg_page(&sg[i])); + if (!md->skb) + put_page(sg_page(&sg[i])); sg[i].length = 0; sg[i].page_link = 0; sg[i].offset = 0; @@ -580,6 +581,8 @@ static int free_sg(struct sock *sk, int start, struct sk_msg_buff *md) if (i == MAX_SKB_FRAGS) i = 0; } + if (md->skb) + consume_skb(md->skb); return free; } -- cgit v1.2.3 From 0ea488ff8d23c93da383fcf424825c298b13b1fb Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Thu, 5 Jul 2018 08:50:15 -0700 Subject: bpf: sockmap, convert bpf_compute_data_pointers to bpf_*_sk_skb In commit 'bpf: bpf_compute_data uses incorrect cb structure' (8108a7751512) we added the routine bpf_compute_data_end_sk_skb() to compute the correct data_end values, but this has since been lost. In kernel v4.14 this was correct and the above patch was applied in it entirety. Then when v4.14 was merged into v4.15-rc1 net-next tree we lost the piece that renamed bpf_compute_data_pointers to the new function bpf_compute_data_end_sk_skb. This was done here, e1ea2f9856b7 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net") When it conflicted with the following rename patch, 6aaae2b6c433 ("bpf: rename bpf_compute_data_end into bpf_compute_data_pointers") Finally, after a refactor I thought even the function bpf_compute_data_end_sk_skb() was no longer needed and it was erroneously removed. However, we never reverted the sk_skb_convert_ctx_access() usage of tcp_skb_cb which had been committed and survived the merge conflict. Here we fix this by adding back the helper and *_data_end_sk_skb() usage. Using the bpf_skc_data_end mapping is not correct because it expects a qdisc_skb_cb object but at the sock layer this is not the case. Even though it happens to work here because we don't overwrite any data in-use at the socket layer and the cb structure is cleared later this has potential to create some subtle issues. But, even more concretely the filter.c access check uses tcp_skb_cb. And by some act of chance though, struct bpf_skb_data_end { struct qdisc_skb_cb qdisc_cb; /* 0 28 */ /* XXX 4 bytes hole, try to pack */ void * data_meta; /* 32 8 */ void * data_end; /* 40 8 */ /* size: 48, cachelines: 1, members: 3 */ /* sum members: 44, holes: 1, sum holes: 4 */ /* last cacheline: 48 bytes */ }; and then tcp_skb_cb, struct tcp_skb_cb { [...] struct { __u32 flags; /* 24 4 */ struct sock * sk_redir; /* 32 8 */ void * data_end; /* 40 8 */ } bpf; /* 24 */ }; So when we use offset_of() to track down the byte offset we get 40 in either case and everything continues to work. Fix this mess and use correct structures its unclear how long this might actually work for until someone moves the structs around. Reported-by: Martin KaFai Lau Fixes: e1ea2f9856b7 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net") Fixes: 6aaae2b6c433 ("bpf: rename bpf_compute_data_end into bpf_compute_data_pointers") Signed-off-by: John Fastabend Signed-off-by: Alexei Starovoitov --- include/net/tcp.h | 4 +++ kernel/bpf/sockmap.c | 4 +-- net/core/filter.c | 98 ++++++++++++++++++++++++++++++++++++++++++++++++---- 3 files changed, 97 insertions(+), 9 deletions(-) diff --git a/include/net/tcp.h b/include/net/tcp.h index 800582b5dd54..af3ec72d5d41 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -828,6 +828,10 @@ struct tcp_skb_cb { #define TCP_SKB_CB(__skb) ((struct tcp_skb_cb *)&((__skb)->cb[0])) +static inline void bpf_compute_data_end_sk_skb(struct sk_buff *skb) +{ + TCP_SKB_CB(skb)->bpf.data_end = skb->data + skb_headlen(skb); +} #if IS_ENABLED(CONFIG_IPV6) /* This is the variant of inet6_iif() that must be used by TCP, diff --git a/kernel/bpf/sockmap.c b/kernel/bpf/sockmap.c index dfc8a8a07c1f..98fb7938beea 100644 --- a/kernel/bpf/sockmap.c +++ b/kernel/bpf/sockmap.c @@ -1236,7 +1236,7 @@ static int smap_verdict_func(struct smap_psock *psock, struct sk_buff *skb) */ TCP_SKB_CB(skb)->bpf.sk_redir = NULL; skb->sk = psock->sock; - bpf_compute_data_pointers(skb); + bpf_compute_data_end_sk_skb(skb); preempt_disable(); rc = (*prog->bpf_func)(skb, prog->insnsi); preempt_enable(); @@ -1491,7 +1491,7 @@ static int smap_parse_func_strparser(struct strparser *strp, * any socket yet. */ skb->sk = psock->sock; - bpf_compute_data_pointers(skb); + bpf_compute_data_end_sk_skb(skb); rc = (*prog->bpf_func)(skb, prog->insnsi); skb->sk = NULL; rcu_read_unlock(); diff --git a/net/core/filter.c b/net/core/filter.c index 3095f1ba7015..470268024a40 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -1762,6 +1762,37 @@ static const struct bpf_func_proto bpf_skb_pull_data_proto = { .arg2_type = ARG_ANYTHING, }; +static inline int sk_skb_try_make_writable(struct sk_buff *skb, + unsigned int write_len) +{ + int err = __bpf_try_make_writable(skb, write_len); + + bpf_compute_data_end_sk_skb(skb); + return err; +} + +BPF_CALL_2(sk_skb_pull_data, struct sk_buff *, skb, u32, len) +{ + /* Idea is the following: should the needed direct read/write + * test fail during runtime, we can pull in more data and redo + * again, since implicitly, we invalidate previous checks here. + * + * Or, since we know how much we need to make read/writeable, + * this can be done once at the program beginning for direct + * access case. By this we overcome limitations of only current + * headroom being accessible. + */ + return sk_skb_try_make_writable(skb, len ? : skb_headlen(skb)); +} + +static const struct bpf_func_proto sk_skb_pull_data_proto = { + .func = sk_skb_pull_data, + .gpl_only = false, + .ret_type = RET_INTEGER, + .arg1_type = ARG_PTR_TO_CTX, + .arg2_type = ARG_ANYTHING, +}; + BPF_CALL_5(bpf_l3_csum_replace, struct sk_buff *, skb, u32, offset, u64, from, u64, to, u64, flags) { @@ -2864,8 +2895,8 @@ static int bpf_skb_trim_rcsum(struct sk_buff *skb, unsigned int new_len) return __skb_trim_rcsum(skb, new_len); } -BPF_CALL_3(bpf_skb_change_tail, struct sk_buff *, skb, u32, new_len, - u64, flags) +static inline int __bpf_skb_change_tail(struct sk_buff *skb, u32 new_len, + u64 flags) { u32 max_len = __bpf_skb_max_len(skb); u32 min_len = __bpf_skb_min_len(skb); @@ -2901,6 +2932,13 @@ BPF_CALL_3(bpf_skb_change_tail, struct sk_buff *, skb, u32, new_len, if (!ret && skb_is_gso(skb)) skb_gso_reset(skb); } + return ret; +} + +BPF_CALL_3(bpf_skb_change_tail, struct sk_buff *, skb, u32, new_len, + u64, flags) +{ + int ret = __bpf_skb_change_tail(skb, new_len, flags); bpf_compute_data_pointers(skb); return ret; @@ -2915,8 +2953,26 @@ static const struct bpf_func_proto bpf_skb_change_tail_proto = { .arg3_type = ARG_ANYTHING, }; -BPF_CALL_3(bpf_skb_change_head, struct sk_buff *, skb, u32, head_room, +BPF_CALL_3(sk_skb_change_tail, struct sk_buff *, skb, u32, new_len, u64, flags) +{ + int ret = __bpf_skb_change_tail(skb, new_len, flags); + + bpf_compute_data_end_sk_skb(skb); + return ret; +} + +static const struct bpf_func_proto sk_skb_change_tail_proto = { + .func = sk_skb_change_tail, + .gpl_only = false, + .ret_type = RET_INTEGER, + .arg1_type = ARG_PTR_TO_CTX, + .arg2_type = ARG_ANYTHING, + .arg3_type = ARG_ANYTHING, +}; + +static inline int __bpf_skb_change_head(struct sk_buff *skb, u32 head_room, + u64 flags) { u32 max_len = __bpf_skb_max_len(skb); u32 new_len = skb->len + head_room; @@ -2942,8 +2998,16 @@ BPF_CALL_3(bpf_skb_change_head, struct sk_buff *, skb, u32, head_room, skb_reset_mac_header(skb); } + return ret; +} + +BPF_CALL_3(bpf_skb_change_head, struct sk_buff *, skb, u32, head_room, + u64, flags) +{ + int ret = __bpf_skb_change_head(skb, head_room, flags); + bpf_compute_data_pointers(skb); - return 0; + return ret; } static const struct bpf_func_proto bpf_skb_change_head_proto = { @@ -2955,6 +3019,23 @@ static const struct bpf_func_proto bpf_skb_change_head_proto = { .arg3_type = ARG_ANYTHING, }; +BPF_CALL_3(sk_skb_change_head, struct sk_buff *, skb, u32, head_room, + u64, flags) +{ + int ret = __bpf_skb_change_head(skb, head_room, flags); + + bpf_compute_data_end_sk_skb(skb); + return ret; +} + +static const struct bpf_func_proto sk_skb_change_head_proto = { + .func = sk_skb_change_head, + .gpl_only = false, + .ret_type = RET_INTEGER, + .arg1_type = ARG_PTR_TO_CTX, + .arg2_type = ARG_ANYTHING, + .arg3_type = ARG_ANYTHING, +}; static unsigned long xdp_get_metalen(const struct xdp_buff *xdp) { return xdp_data_meta_unsupported(xdp) ? 0 : @@ -4618,9 +4699,12 @@ bool bpf_helper_changes_pkt_data(void *func) func == bpf_skb_store_bytes || func == bpf_skb_change_proto || func == bpf_skb_change_head || + func == sk_skb_change_head || func == bpf_skb_change_tail || + func == sk_skb_change_tail || func == bpf_skb_adjust_room || func == bpf_skb_pull_data || + func == sk_skb_pull_data || func == bpf_clone_redirect || func == bpf_l3_csum_replace || func == bpf_l4_csum_replace || @@ -4872,11 +4956,11 @@ sk_skb_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog) case BPF_FUNC_skb_load_bytes: return &bpf_skb_load_bytes_proto; case BPF_FUNC_skb_pull_data: - return &bpf_skb_pull_data_proto; + return &sk_skb_pull_data_proto; case BPF_FUNC_skb_change_tail: - return &bpf_skb_change_tail_proto; + return &sk_skb_change_tail_proto; case BPF_FUNC_skb_change_head: - return &bpf_skb_change_head_proto; + return &sk_skb_change_head_proto; case BPF_FUNC_get_socket_cookie: return &bpf_get_socket_cookie_proto; case BPF_FUNC_get_socket_uid: -- cgit v1.2.3 From d8d7218ad842e18fc6976b87c08ed749e8d56313 Mon Sep 17 00:00:00 2001 From: Toshiaki Makita Date: Fri, 6 Jul 2018 11:49:00 +0900 Subject: xdp: XDP_REDIRECT should check IFF_UP and MTU Otherwise we end up with attempting to send packets from down devices or to send oversized packets, which may cause unexpected driver/device behaviour. Generic XDP has already done this check, so reuse the logic in native XDP. Fixes: 814abfabef3c ("xdp: add bpf_redirect helper function") Signed-off-by: Toshiaki Makita Signed-off-by: Alexei Starovoitov --- include/linux/filter.h | 6 +++--- kernel/bpf/devmap.c | 7 ++++++- net/core/filter.c | 9 +++++++-- 3 files changed, 16 insertions(+), 6 deletions(-) diff --git a/include/linux/filter.h b/include/linux/filter.h index 300baad62c88..c73dd7396886 100644 --- a/include/linux/filter.h +++ b/include/linux/filter.h @@ -765,8 +765,8 @@ static inline bool bpf_dump_raw_ok(void) struct bpf_prog *bpf_patch_insn_single(struct bpf_prog *prog, u32 off, const struct bpf_insn *patch, u32 len); -static inline int __xdp_generic_ok_fwd_dev(struct sk_buff *skb, - struct net_device *fwd) +static inline int xdp_ok_fwd_dev(const struct net_device *fwd, + unsigned int pktlen) { unsigned int len; @@ -774,7 +774,7 @@ static inline int __xdp_generic_ok_fwd_dev(struct sk_buff *skb, return -ENETDOWN; len = fwd->mtu + fwd->hard_header_len + VLAN_HLEN; - if (skb->len > len) + if (pktlen > len) return -EMSGSIZE; return 0; diff --git a/kernel/bpf/devmap.c b/kernel/bpf/devmap.c index 642c97f6d1b8..d361fc1e3bf3 100644 --- a/kernel/bpf/devmap.c +++ b/kernel/bpf/devmap.c @@ -334,10 +334,15 @@ int dev_map_enqueue(struct bpf_dtab_netdev *dst, struct xdp_buff *xdp, { struct net_device *dev = dst->dev; struct xdp_frame *xdpf; + int err; if (!dev->netdev_ops->ndo_xdp_xmit) return -EOPNOTSUPP; + err = xdp_ok_fwd_dev(dev, xdp->data_end - xdp->data); + if (unlikely(err)) + return err; + xdpf = convert_to_xdp_frame(xdp); if (unlikely(!xdpf)) return -EOVERFLOW; @@ -350,7 +355,7 @@ int dev_map_generic_redirect(struct bpf_dtab_netdev *dst, struct sk_buff *skb, { int err; - err = __xdp_generic_ok_fwd_dev(skb, dst->dev); + err = xdp_ok_fwd_dev(dst->dev, skb->len); if (unlikely(err)) return err; skb->dev = dst->dev; diff --git a/net/core/filter.c b/net/core/filter.c index 470268024a40..5fa66a33927f 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -3128,12 +3128,16 @@ static int __bpf_tx_xdp(struct net_device *dev, u32 index) { struct xdp_frame *xdpf; - int sent; + int err, sent; if (!dev->netdev_ops->ndo_xdp_xmit) { return -EOPNOTSUPP; } + err = xdp_ok_fwd_dev(dev, xdp->data_end - xdp->data); + if (unlikely(err)) + return err; + xdpf = convert_to_xdp_frame(xdp); if (unlikely(!xdpf)) return -EOVERFLOW; @@ -3367,7 +3371,8 @@ int xdp_do_generic_redirect(struct net_device *dev, struct sk_buff *skb, goto err; } - if (unlikely((err = __xdp_generic_ok_fwd_dev(skb, fwd)))) + err = xdp_ok_fwd_dev(fwd, skb->len); + if (unlikely(err)) goto err; skb->dev = fwd; -- cgit v1.2.3 From e7372197e15856ec4ee66b668020a662994db103 Mon Sep 17 00:00:00 2001 From: David Ahern Date: Sat, 7 Jul 2018 16:15:26 -0700 Subject: net/ipv4: Set oif in fib_compute_spec_dst Xin reported that icmp replies may not use the address on the device the echo request is received if the destination address is broadcast. Instead a route lookup is done without considering VRF context. Fix by setting oif in flow struct to the master device if it is enslaved. That directs the lookup to the VRF table. If the device is not enslaved, oif is still 0 so no affect. Fixes: cd2fbe1b6b51 ("net: Use VRF device index for lookups on RX") Reported-by: Xin Long Signed-off-by: David Ahern Signed-off-by: David S. Miller --- net/ipv4/fib_frontend.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c index b21833651394..e46cdd310e5f 100644 --- a/net/ipv4/fib_frontend.c +++ b/net/ipv4/fib_frontend.c @@ -300,6 +300,7 @@ __be32 fib_compute_spec_dst(struct sk_buff *skb) if (!ipv4_is_zeronet(ip_hdr(skb)->saddr)) { struct flowi4 fl4 = { .flowi4_iif = LOOPBACK_IFINDEX, + .flowi4_oif = l3mdev_master_ifindex_rcu(dev), .daddr = ip_hdr(skb)->saddr, .flowi4_tos = RT_TOS(ip_hdr(skb)->tos), .flowi4_scope = scope, -- cgit v1.2.3 From acc2cf4e37174646a24cba42fa53c668b2338d4e Mon Sep 17 00:00:00 2001 From: Lorenzo Colitti Date: Sat, 7 Jul 2018 16:31:40 +0900 Subject: net: diag: Don't double-free TCP_NEW_SYN_RECV sockets in tcp_abort When tcp_diag_destroy closes a TCP_NEW_SYN_RECV socket, it first frees it by calling inet_csk_reqsk_queue_drop_and_and_put in tcp_abort, and then frees it again by calling sock_gen_put. Since tcp_abort only has one caller, and all the other codepaths in tcp_abort don't free the socket, just remove the free in that function. Cc: David Ahern Tested: passes Android sock_diag_test.py, which exercises this codepath Fixes: d7226c7a4dd1 ("net: diag: Fix refcnt leak in error path destroying socket") Signed-off-by: Lorenzo Colitti Signed-off-by: Eric Dumazet Reviewed-by: David Ahern Tested-by: David Ahern Signed-off-by: David S. Miller --- net/ipv4/tcp.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index e7b53d2a971f..c959bb6ea4ed 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -3720,8 +3720,7 @@ int tcp_abort(struct sock *sk, int err) struct request_sock *req = inet_reqsk(sk); local_bh_disable(); - inet_csk_reqsk_queue_drop_and_put(req->rsk_listener, - req); + inet_csk_reqsk_queue_drop(req->rsk_listener, req); local_bh_enable(); return 0; } -- cgit v1.2.3 From f6f2a4a2eb92bc73671204198bb2f8ab53ff59fb Mon Sep 17 00:00:00 2001 From: Paolo Abeni Date: Fri, 6 Jul 2018 12:30:20 +0200 Subject: ipfrag: really prevent allocation on netns exit Setting the low threshold to 0 has no effect on frags allocation, we need to clear high_thresh instead. The code was pre-existent to commit 648700f76b03 ("inet: frags: use rhashtables for reassembly units"), but before the above, such assignment had a different role: prevent concurrent eviction from the worker and the netns cleanup helper. Fixes: 648700f76b03 ("inet: frags: use rhashtables for reassembly units") Signed-off-by: Paolo Abeni Signed-off-by: David S. Miller --- net/ipv4/inet_fragment.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/inet_fragment.c b/net/ipv4/inet_fragment.c index c9e35b81d093..1e4cf3ab560f 100644 --- a/net/ipv4/inet_fragment.c +++ b/net/ipv4/inet_fragment.c @@ -90,7 +90,7 @@ static void inet_frags_free_cb(void *ptr, void *arg) void inet_frags_exit_net(struct netns_frags *nf) { - nf->low_thresh = 0; /* prevent creation of new frags */ + nf->high_thresh = 0; /* prevent creation of new frags */ rhashtable_free_and_destroy(&nf->rhashtable, inet_frags_free_cb, NULL); } -- cgit v1.2.3 From 6508b6781be076f889e3077a1a5fadf1930a569d Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sat, 7 Jul 2018 23:00:01 -0700 Subject: tcp: cleanup copied_seq and urg_data in tcp_disconnect tcp_zerocopy_receive() relies on tcp_inq() to limit number of bytes requested by user. syzbot found that after tcp_disconnect(), tcp_inq() was returning a stale value (number of bytes in queue before the disconnect). Note that after this patch, ioctl(fd, SIOCINQ, &val) is also fixed and returns 0, so this might be a candidate for all known linux kernels. While we are at this, we probably also should clear urg_data to avoid other syzkaller reports after it discovers how to deal with urgent data. syzkaller repro : socket(PF_INET, SOCK_STREAM, IPPROTO_IP) = 3 bind(3, {sa_family=AF_INET, sin_port=htons(20000), sin_addr=inet_addr("224.0.0.1")}, 16) = 0 connect(3, {sa_family=AF_INET, sin_port=htons(20000), sin_addr=inet_addr("127.0.0.1")}, 16) = 0 send(3, ..., 4096, 0) = 4096 connect(3, {sa_family=AF_UNSPEC, sa_data="\0\0\0\0\0\0\0\0\0\0\0\0\0\0"}, 128) = 0 getsockopt(3, SOL_TCP, TCP_ZEROCOPY_RECEIVE, ..., [16]) = 0 // CRASH Fixes: 05255b823a61 ("tcp: add TCP_ZEROCOPY_RECEIVE support for zerocopy receive") Signed-off-by: Eric Dumazet Reported-by: syzbot Signed-off-by: David S. Miller --- net/ipv4/tcp.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index c959bb6ea4ed..0d43705dd001 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -2562,6 +2562,8 @@ int tcp_disconnect(struct sock *sk, int flags) tcp_clear_xmit_timers(sk); __skb_queue_purge(&sk->sk_receive_queue); + tp->copied_seq = tp->rcv_nxt; + tp->urg_data = 0; tcp_write_queue_purge(sk); tcp_fastopen_active_disable_ofo_check(sk); skb_rbtree_purge(&tp->out_of_order_queue); -- cgit v1.2.3 From 44de022c4382541cebdd6de4465d1f4f465ff1dd Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sun, 8 Jul 2018 19:35:02 -0400 Subject: ext4: fix false negatives *and* false positives in ext4_check_descriptors() Ext4_check_descriptors() was getting called before s_gdb_count was initialized. So for file systems w/o the meta_bg feature, allocation bitmaps could overlap the block group descriptors and ext4 wouldn't notice. For file systems with the meta_bg feature enabled, there was a fencepost error which would cause the ext4_check_descriptors() to incorrectly believe that the block allocation bitmap overlaps with the block group descriptor blocks, and it would reject the mount. Fix both of these problems. Signed-off-by: Theodore Ts'o Cc: stable@vger.kernel.org --- fs/ext4/super.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index ba2396a7bd04..eff5c983e067 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -2342,7 +2342,7 @@ static int ext4_check_descriptors(struct super_block *sb, struct ext4_sb_info *sbi = EXT4_SB(sb); ext4_fsblk_t first_block = le32_to_cpu(sbi->s_es->s_first_data_block); ext4_fsblk_t last_block; - ext4_fsblk_t last_bg_block = sb_block + ext4_bg_num_gdb(sb, 0) + 1; + ext4_fsblk_t last_bg_block = sb_block + ext4_bg_num_gdb(sb, 0); ext4_fsblk_t block_bitmap; ext4_fsblk_t inode_bitmap; ext4_fsblk_t inode_table; @@ -4085,14 +4085,13 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent) goto failed_mount2; } } + sbi->s_gdb_count = db_count; if (!ext4_check_descriptors(sb, logical_sb_block, &first_not_zeroed)) { ext4_msg(sb, KERN_ERR, "group descriptors corrupted!"); ret = -EFSCORRUPTED; goto failed_mount2; } - sbi->s_gdb_count = db_count; - timer_setup(&sbi->s_err_report, print_daily_error_info, 0); /* Register extent status tree shrinker */ -- cgit v1.2.3 From 2dca60d98e241bea686004168f85208f215fc697 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sun, 8 Jul 2018 19:36:02 -0400 Subject: ext4: clear mmp sequence number when remounting read-only Previously, when an MMP-protected file system is remounted read-only, the kmmpd thread would exit the next time it woke up (a few seconds later), without resetting the MMP sequence number back to EXT4_MMP_SEQ_CLEAN. Fix this by explicitly killing the MMP thread when the file system is remounted read-only. Signed-off-by: Theodore Ts'o Cc: Andreas Dilger --- fs/ext4/mmp.c | 7 ++----- fs/ext4/super.c | 2 ++ 2 files changed, 4 insertions(+), 5 deletions(-) diff --git a/fs/ext4/mmp.c b/fs/ext4/mmp.c index 27b9a76a0dfa..638ad4743477 100644 --- a/fs/ext4/mmp.c +++ b/fs/ext4/mmp.c @@ -186,11 +186,8 @@ static int kmmpd(void *data) goto exit_thread; } - if (sb_rdonly(sb)) { - ext4_warning(sb, "kmmpd being stopped since filesystem " - "has been remounted as readonly."); - goto exit_thread; - } + if (sb_rdonly(sb)) + break; diff = jiffies - last_update_time; if (diff < mmp_update_interval * HZ) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index eff5c983e067..680526e9ee96 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -5212,6 +5212,8 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data) if (sbi->s_journal) ext4_mark_recovery_complete(sb, es); + if (sbi->s_mmp_tsk) + kthread_stop(sbi->s_mmp_tsk); } else { /* Make sure we can mount this feature set readwrite */ if (ext4_has_feature_readonly(sb) || -- cgit v1.2.3 From 5cf3006cc81d9aa09a10aa781fc065546b12919d Mon Sep 17 00:00:00 2001 From: Bernd Edlinger Date: Sun, 8 Jul 2018 09:57:22 +0000 Subject: nl80211: Add a missing break in parse_station_flags I was looking at usually suppressed gcc warnings, [-Wimplicit-fallthrough=] in this case: The code definitely looks like a break is missing here. However I am not able to test the NL80211_IFTYPE_MESH_POINT, nor do I actually know what might be :) So please use this patch with caution and only if you are able to do some testing. Signed-off-by: Bernd Edlinger [johannes: looks obvious enough to apply as is, interesting though that it never seems to have been a problem] Signed-off-by: Johannes Berg --- net/wireless/nl80211.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index b6c700572755..80bc986c79e5 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -4409,6 +4409,7 @@ static int parse_station_flags(struct genl_info *info, params->sta_flags_mask = BIT(NL80211_STA_FLAG_AUTHENTICATED) | BIT(NL80211_STA_FLAG_MFP) | BIT(NL80211_STA_FLAG_AUTHORIZED); + break; default: return -EINVAL; } -- cgit v1.2.3 From 3156b53c2e2fadafa1a16412a8791b38f94b5bdc Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 6 Jul 2018 16:28:28 +0200 Subject: drm/sun4i: link in front-end code if needed When the base sun4i DRM driver is built-in but the back-end is a loadable module, we run into a link error: drivers/gpu/drm/sun4i/sun4i_drv.o: In function `sun4i_drv_probe': sun4i_drv.c:(.text+0x60c): undefined reference to `sun4i_frontend_of_table' The dependency is a bit tricky, the best workaround I have come up with is to use a Makefile hack to to interpret both CONFIG_DRM_SUN4I_BACKEND=m and CONFIG_DRM_SUN4I_BACKEND=y as a directive to build the front-end the same way as the main module. Fixes: dd0421f47505 ("drm/sun4i: Add a driver for the display frontend") Link: https://lore.kernel.org/lkml/20180301091908.zcptz3ezqr2c6ly5@flea/ Signed-off-by: Arnd Bergmann Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20180706142847.2032381-1-arnd@arndb.de --- drivers/gpu/drm/sun4i/Makefile | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/sun4i/Makefile b/drivers/gpu/drm/sun4i/Makefile index 2589f4acd5ae..9c81301d0eed 100644 --- a/drivers/gpu/drm/sun4i/Makefile +++ b/drivers/gpu/drm/sun4i/Makefile @@ -32,7 +32,10 @@ obj-$(CONFIG_DRM_SUN4I) += sun4i-tcon.o obj-$(CONFIG_DRM_SUN4I) += sun4i_tv.o obj-$(CONFIG_DRM_SUN4I) += sun6i_drc.o -obj-$(CONFIG_DRM_SUN4I_BACKEND) += sun4i-backend.o sun4i-frontend.o +obj-$(CONFIG_DRM_SUN4I_BACKEND) += sun4i-backend.o +ifdef CONFIG_DRM_SUN4I_BACKEND +obj-$(CONFIG_DRM_SUN4I) += sun4i-frontend.o +endif obj-$(CONFIG_DRM_SUN4I_HDMI) += sun4i-drm-hdmi.o obj-$(CONFIG_DRM_SUN6I_DSI) += sun6i-dsi.o obj-$(CONFIG_DRM_SUN8I_DW_HDMI) += sun8i-drm-hdmi.o -- cgit v1.2.3 From 20f330452ad8814f2289a589baf65e21270879a7 Mon Sep 17 00:00:00 2001 From: Stefan Schmidt Date: Fri, 22 Sep 2017 14:13:53 +0200 Subject: ieee802154: at86rf230: switch from BUG_ON() to WARN_ON() on problem The check is valid but it does not warrant to crash the kernel. A WARN_ON() is good enough here. Found by checkpatch. Signed-off-by: Stefan Schmidt --- drivers/net/ieee802154/at86rf230.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c index 77abedf0b524..7b3a381d198a 100644 --- a/drivers/net/ieee802154/at86rf230.c +++ b/drivers/net/ieee802154/at86rf230.c @@ -940,7 +940,7 @@ at86rf230_xmit(struct ieee802154_hw *hw, struct sk_buff *skb) static int at86rf230_ed(struct ieee802154_hw *hw, u8 *level) { - BUG_ON(!level); + WARN_ON(!level); *level = 0xbe; return 0; } -- cgit v1.2.3 From 8a81388ec27c4c0adbdecd20e67bb5f411ab46b2 Mon Sep 17 00:00:00 2001 From: Stefan Schmidt Date: Fri, 22 Sep 2017 14:13:54 +0200 Subject: ieee802154: at86rf230: use __func__ macro for debug messages Instead of having the function name hard-coded (it might change and we forgot to update them in the debug output) we can use __func__ instead and also shorter the line so we do not need to break it. Also fix an extra blank line while being here. Found by checkpatch. Signed-off-by: Stefan Schmidt --- drivers/net/ieee802154/at86rf230.c | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c index 7b3a381d198a..3d9e91579866 100644 --- a/drivers/net/ieee802154/at86rf230.c +++ b/drivers/net/ieee802154/at86rf230.c @@ -1121,8 +1121,7 @@ at86rf230_set_hw_addr_filt(struct ieee802154_hw *hw, if (changed & IEEE802154_AFILT_SADDR_CHANGED) { u16 addr = le16_to_cpu(filt->short_addr); - dev_vdbg(&lp->spi->dev, - "at86rf230_set_hw_addr_filt called for saddr\n"); + dev_vdbg(&lp->spi->dev, "%s called for saddr\n", __func__); __at86rf230_write(lp, RG_SHORT_ADDR_0, addr); __at86rf230_write(lp, RG_SHORT_ADDR_1, addr >> 8); } @@ -1130,8 +1129,7 @@ at86rf230_set_hw_addr_filt(struct ieee802154_hw *hw, if (changed & IEEE802154_AFILT_PANID_CHANGED) { u16 pan = le16_to_cpu(filt->pan_id); - dev_vdbg(&lp->spi->dev, - "at86rf230_set_hw_addr_filt called for pan id\n"); + dev_vdbg(&lp->spi->dev, "%s called for pan id\n", __func__); __at86rf230_write(lp, RG_PAN_ID_0, pan); __at86rf230_write(lp, RG_PAN_ID_1, pan >> 8); } @@ -1140,15 +1138,13 @@ at86rf230_set_hw_addr_filt(struct ieee802154_hw *hw, u8 i, addr[8]; memcpy(addr, &filt->ieee_addr, 8); - dev_vdbg(&lp->spi->dev, - "at86rf230_set_hw_addr_filt called for IEEE addr\n"); + dev_vdbg(&lp->spi->dev, "%s called for IEEE addr\n", __func__); for (i = 0; i < 8; i++) __at86rf230_write(lp, RG_IEEE_ADDR_0 + i, addr[i]); } if (changed & IEEE802154_AFILT_PANC_CHANGED) { - dev_vdbg(&lp->spi->dev, - "at86rf230_set_hw_addr_filt called for panc change\n"); + dev_vdbg(&lp->spi->dev, "%s called for panc change\n", __func__); if (filt->pan_coord) at86rf230_write_subreg(lp, SR_AACK_I_AM_COORD, 1); else @@ -1252,7 +1248,6 @@ at86rf230_set_cca_mode(struct ieee802154_hw *hw, return at86rf230_write_subreg(lp, SR_CCA_MODE, val); } - static int at86rf230_set_cca_ed_level(struct ieee802154_hw *hw, s32 mbm) { -- cgit v1.2.3 From 8f2fbc6c60ff213369e06a73610fc882a42fdf20 Mon Sep 17 00:00:00 2001 From: Stefan Schmidt Date: Fri, 22 Sep 2017 14:14:05 +0200 Subject: ieee802154: fakelb: switch from BUG_ON() to WARN_ON() on problem The check is valid but it does not warrant to crash the kernel. A WARN_ON() is good enough here. Found by checkpatch. Signed-off-by: Stefan Schmidt --- drivers/net/ieee802154/fakelb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ieee802154/fakelb.c b/drivers/net/ieee802154/fakelb.c index 0d673f7682ee..176395e4b7bb 100644 --- a/drivers/net/ieee802154/fakelb.c +++ b/drivers/net/ieee802154/fakelb.c @@ -49,7 +49,7 @@ struct fakelb_phy { static int fakelb_hw_ed(struct ieee802154_hw *hw, u8 *level) { - BUG_ON(!level); + WARN_ON(!level); *level = 0xbe; return 0; -- cgit v1.2.3 From 4466b1f0e022f94a026bd700fee34bff15cdc4ef Mon Sep 17 00:00:00 2001 From: Dmitry Osipenko Date: Sat, 19 May 2018 04:07:10 +0300 Subject: gpu: host1x: Skip IOMMU initialization if firewall is enabled Host1x's CDMA can't access the command buffers if IOMMU and Host1x firewall are enabled in the kernels config because firewall doesn't map the copied buffer into IOVA space. Fix this by skipping IOMMU initialization if firewall is enabled as firewall merges sparse cmdbufs into a single contiguous buffer and hence IOMMU isn't needed in this case. Signed-off-by: Dmitry Osipenko Signed-off-by: Thierry Reding --- drivers/gpu/host1x/dev.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/host1x/dev.c b/drivers/gpu/host1x/dev.c index f1d5f76e9c33..d88073e7d22d 100644 --- a/drivers/gpu/host1x/dev.c +++ b/drivers/gpu/host1x/dev.c @@ -218,6 +218,9 @@ static int host1x_probe(struct platform_device *pdev) return err; } + if (IS_ENABLED(CONFIG_TEGRA_HOST1X_FIREWALL)) + goto skip_iommu; + host->group = iommu_group_get(&pdev->dev); if (host->group) { struct iommu_domain_geometry *geometry; -- cgit v1.2.3 From ec58923215dbbeef59ee82923ee94d745f73db58 Mon Sep 17 00:00:00 2001 From: Dmitry Osipenko Date: Fri, 6 Jul 2018 21:02:36 +0300 Subject: gpu: host1x: Check whether size of unpin isn't 0 Only gather pins are mapped by the Host1x driver, regular BO relocations are not. Check whether size of unpin isn't 0, otherwise IOVA allocation at 0x0 could be erroneously released. Signed-off-by: Dmitry Osipenko Signed-off-by: Thierry Reding --- drivers/gpu/host1x/job.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/host1x/job.c b/drivers/gpu/host1x/job.c index e2f4a4d93d20..527a1cddb14f 100644 --- a/drivers/gpu/host1x/job.c +++ b/drivers/gpu/host1x/job.c @@ -569,7 +569,8 @@ void host1x_job_unpin(struct host1x_job *job) for (i = 0; i < job->num_unpins; i++) { struct host1x_job_unpin_data *unpin = &job->unpins[i]; - if (!IS_ENABLED(CONFIG_TEGRA_HOST1X_FIREWALL) && host->domain) { + if (!IS_ENABLED(CONFIG_TEGRA_HOST1X_FIREWALL) && + unpin->size && host->domain) { iommu_unmap(host->domain, job->addr_phys[i], unpin->size); free_iova(&host->iova, -- cgit v1.2.3 From 5265f0338bc0feec6c0d544dfe005dec1a93cb93 Mon Sep 17 00:00:00 2001 From: Mikko Perttunen Date: Wed, 20 Jun 2018 16:03:58 +0300 Subject: drm/tegra: Fix comparison operator for buffer size Here we are checking for the buffer length, not an offset for writing to, so using > is correct. The current code incorrectly rejects a command buffer ending at the memory buffer's end. Signed-off-by: Mikko Perttunen Reviewed-by: Dmitry Osipenko Signed-off-by: Thierry Reding --- drivers/gpu/drm/tegra/drm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/tegra/drm.c b/drivers/gpu/drm/tegra/drm.c index 776c1513e582..a2bd5876c633 100644 --- a/drivers/gpu/drm/tegra/drm.c +++ b/drivers/gpu/drm/tegra/drm.c @@ -398,7 +398,7 @@ int tegra_drm_submit(struct tegra_drm_context *context, * unaligned offset is malformed and cause commands stream * corruption on the buffer address relocation. */ - if (offset & 3 || offset >= obj->gem.size) { + if (offset & 3 || offset > obj->gem.size) { err = -EINVAL; goto fail; } -- cgit v1.2.3 From f292b87d3ac020418644d8a4bbf29814890505cb Mon Sep 17 00:00:00 2001 From: Roman Gushchin Date: Fri, 6 Jul 2018 14:34:29 -0700 Subject: bpf: include errno.h from bpf-cgroup.h Commit fdb5c4531c1e ("bpf: fix attach type BPF_LIRC_MODE2 dependency wrt CONFIG_CGROUP_BPF") caused some build issues, detected by 0-DAY kernel test infrastructure. The problem is that cgroup_bpf_prog_attach/detach/query() functions can return -EINVAL error code, which is not defined. Fix this adding errno.h to includes. Fixes: fdb5c4531c1e ("bpf: fix attach type BPF_LIRC_MODE2 dependency wrt CONFIG_CGROUP_BPF") Signed-off-by: Roman Gushchin Cc: Sean Young Cc: Daniel Borkmann Cc: Alexei Starovoitov Signed-off-by: Daniel Borkmann --- include/linux/bpf-cgroup.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/bpf-cgroup.h b/include/linux/bpf-cgroup.h index 79795c5fa7c3..d50c2f0a655a 100644 --- a/include/linux/bpf-cgroup.h +++ b/include/linux/bpf-cgroup.h @@ -2,6 +2,7 @@ #ifndef _BPF_CGROUP_H #define _BPF_CGROUP_H +#include #include #include -- cgit v1.2.3 From 36d26d6b6208399070a9d7993534fef9fc26b1ba Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Mon, 25 Jun 2018 16:49:51 +0300 Subject: net: ieee802154: adf7242: Fix erroneous RX enable Only enable RX mode if the netdev is opened. Signed-off-by: Michael Hennerich Signed-off-by: Alexandru Ardelean Signed-off-by: Stefan Schmidt --- drivers/net/ieee802154/adf7242.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/ieee802154/adf7242.c b/drivers/net/ieee802154/adf7242.c index 64f1b1e77bc0..c3da43191f70 100644 --- a/drivers/net/ieee802154/adf7242.c +++ b/drivers/net/ieee802154/adf7242.c @@ -719,7 +719,10 @@ static int adf7242_channel(struct ieee802154_hw *hw, u8 page, u8 channel) adf7242_write_reg(lp, REG_CH_FREQ1, freq >> 8); adf7242_write_reg(lp, REG_CH_FREQ2, freq >> 16); - return adf7242_cmd(lp, CMD_RC_RX); + if (test_bit(FLAG_START, &lp->flags)) + return adf7242_cmd_rx(lp); + else + return adf7242_cmd(lp, CMD_RC_PHY_RDY); } static int adf7242_set_hw_addr_filt(struct ieee802154_hw *hw, -- cgit v1.2.3 From 58e9683d14752debc6f22daf6b23e031787df31f Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Mon, 25 Jun 2018 16:57:37 +0300 Subject: net: ieee802154: adf7242: Fix OCL calibration runs Reissuing RC_RX every 400ms - to adjust for offset drift in receiver see datasheet page 61, OCL section. Signed-off-by: Michael Hennerich Signed-off-by: Alexandru Ardelean Signed-off-by: Stefan Schmidt --- drivers/net/ieee802154/adf7242.c | 29 ++++++++++++++++++++++++++++- 1 file changed, 28 insertions(+), 1 deletion(-) diff --git a/drivers/net/ieee802154/adf7242.c b/drivers/net/ieee802154/adf7242.c index c3da43191f70..23a52b9293f3 100644 --- a/drivers/net/ieee802154/adf7242.c +++ b/drivers/net/ieee802154/adf7242.c @@ -275,6 +275,8 @@ struct adf7242_local { struct spi_message stat_msg; struct spi_transfer stat_xfer; struct dentry *debugfs_root; + struct delayed_work work; + struct workqueue_struct *wqueue; unsigned long flags; int tx_stat; bool promiscuous; @@ -575,10 +577,26 @@ static int adf7242_cmd_rx(struct adf7242_local *lp) /* Wait until the ACK is sent */ adf7242_wait_status(lp, RC_STATUS_PHY_RDY, RC_STATUS_MASK, __LINE__); adf7242_clear_irqstat(lp); + mod_delayed_work(lp->wqueue, &lp->work, msecs_to_jiffies(400)); return adf7242_cmd(lp, CMD_RC_RX); } +static void adf7242_rx_cal_work(struct work_struct *work) +{ + struct adf7242_local *lp = + container_of(work, struct adf7242_local, work.work); + + /* Reissuing RC_RX every 400ms - to adjust for offset + * drift in receiver (datasheet page 61, OCL section) + */ + + if (!test_bit(FLAG_XMIT, &lp->flags)) { + adf7242_cmd(lp, CMD_RC_PHY_RDY); + adf7242_cmd_rx(lp); + } +} + static int adf7242_set_txpower(struct ieee802154_hw *hw, int mbm) { struct adf7242_local *lp = hw->priv; @@ -686,7 +704,7 @@ static int adf7242_start(struct ieee802154_hw *hw) enable_irq(lp->spi->irq); set_bit(FLAG_START, &lp->flags); - return adf7242_cmd(lp, CMD_RC_RX); + return adf7242_cmd_rx(lp); } static void adf7242_stop(struct ieee802154_hw *hw) @@ -694,6 +712,7 @@ static void adf7242_stop(struct ieee802154_hw *hw) struct adf7242_local *lp = hw->priv; disable_irq(lp->spi->irq); + cancel_delayed_work_sync(&lp->work); adf7242_cmd(lp, CMD_RC_IDLE); clear_bit(FLAG_START, &lp->flags); adf7242_clear_irqstat(lp); @@ -817,6 +836,7 @@ static int adf7242_xmit(struct ieee802154_hw *hw, struct sk_buff *skb) /* ensure existing instances of the IRQ handler have completed */ disable_irq(lp->spi->irq); set_bit(FLAG_XMIT, &lp->flags); + cancel_delayed_work_sync(&lp->work); reinit_completion(&lp->tx_complete); adf7242_cmd(lp, CMD_RC_PHY_RDY); adf7242_clear_irqstat(lp); @@ -955,6 +975,7 @@ static irqreturn_t adf7242_isr(int irq, void *data) unsigned int xmit; u8 irq1; + mod_delayed_work(lp->wqueue, &lp->work, msecs_to_jiffies(400)); adf7242_read_reg(lp, REG_IRQ1_SRC1, &irq1); if (!(irq1 & (IRQ_RX_PKT_RCVD | IRQ_CSMA_CA))) @@ -1244,6 +1265,9 @@ static int adf7242_probe(struct spi_device *spi) spi_message_add_tail(&lp->stat_xfer, &lp->stat_msg); spi_set_drvdata(spi, lp); + INIT_DELAYED_WORK(&lp->work, adf7242_rx_cal_work); + lp->wqueue = alloc_ordered_workqueue(dev_name(&spi->dev), + WQ_MEM_RECLAIM); ret = adf7242_hw_init(lp); if (ret) @@ -1287,6 +1311,9 @@ static int adf7242_remove(struct spi_device *spi) if (!IS_ERR_OR_NULL(lp->debugfs_root)) debugfs_remove_recursive(lp->debugfs_root); + cancel_delayed_work_sync(&lp->work); + destroy_workqueue(lp->wqueue); + ieee802154_unregister_hw(lp->hw); mutex_destroy(&lp->bmux); ieee802154_free_hw(lp->hw); -- cgit v1.2.3 From d378859a667edc99e3473704847698cae97ca2b1 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 24 Jun 2018 14:35:10 +0100 Subject: drm/armada: fix colorkey mode property The colorkey mode property was not correctly disabling the colorkeying when "disabled" mode was selected. Arrange for this to work as one would expect. Signed-off-by: Russell King --- drivers/gpu/drm/armada/armada_hw.h | 1 + drivers/gpu/drm/armada/armada_overlay.c | 30 ++++++++++++++++++++++-------- 2 files changed, 23 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/armada/armada_hw.h b/drivers/gpu/drm/armada/armada_hw.h index 27319a8335e2..345dc4d0851e 100644 --- a/drivers/gpu/drm/armada/armada_hw.h +++ b/drivers/gpu/drm/armada/armada_hw.h @@ -160,6 +160,7 @@ enum { CFG_ALPHAM_GRA = 0x1 << 16, CFG_ALPHAM_CFG = 0x2 << 16, CFG_ALPHA_MASK = 0xff << 8, +#define CFG_ALPHA(x) ((x) << 8) CFG_PIXCMD_MASK = 0xff, }; diff --git a/drivers/gpu/drm/armada/armada_overlay.c b/drivers/gpu/drm/armada/armada_overlay.c index c391955009d6..afa7ded3ae31 100644 --- a/drivers/gpu/drm/armada/armada_overlay.c +++ b/drivers/gpu/drm/armada/armada_overlay.c @@ -28,6 +28,7 @@ struct armada_ovl_plane_properties { uint16_t contrast; uint16_t saturation; uint32_t colorkey_mode; + uint32_t colorkey_enable; }; struct armada_ovl_plane { @@ -54,11 +55,13 @@ armada_ovl_update_attr(struct armada_ovl_plane_properties *prop, writel_relaxed(0x00002000, dcrtc->base + LCD_SPU_CBSH_HUE); spin_lock_irq(&dcrtc->irq_lock); - armada_updatel(prop->colorkey_mode | CFG_ALPHAM_GRA, - CFG_CKMODE_MASK | CFG_ALPHAM_MASK | CFG_ALPHA_MASK, - dcrtc->base + LCD_SPU_DMA_CTRL1); - - armada_updatel(ADV_GRACOLORKEY, 0, dcrtc->base + LCD_SPU_ADV_REG); + armada_updatel(prop->colorkey_mode, + CFG_CKMODE_MASK | CFG_ALPHAM_MASK | CFG_ALPHA_MASK, + dcrtc->base + LCD_SPU_DMA_CTRL1); + if (dcrtc->variant->has_spu_adv_reg) + armada_updatel(prop->colorkey_enable, + ADV_GRACOLORKEY | ADV_VIDCOLORKEY, + dcrtc->base + LCD_SPU_ADV_REG); spin_unlock_irq(&dcrtc->irq_lock); } @@ -321,8 +324,17 @@ static int armada_ovl_plane_set_property(struct drm_plane *plane, dplane->prop.colorkey_vb |= K2B(val); update_attr = true; } else if (property == priv->colorkey_mode_prop) { - dplane->prop.colorkey_mode &= ~CFG_CKMODE_MASK; - dplane->prop.colorkey_mode |= CFG_CKMODE(val); + if (val == CKMODE_DISABLE) { + dplane->prop.colorkey_mode = + CFG_CKMODE(CKMODE_DISABLE) | + CFG_ALPHAM_CFG | CFG_ALPHA(255); + dplane->prop.colorkey_enable = 0; + } else { + dplane->prop.colorkey_mode = + CFG_CKMODE(val) | + CFG_ALPHAM_GRA | CFG_ALPHA(0); + dplane->prop.colorkey_enable = ADV_GRACOLORKEY; + } update_attr = true; } else if (property == priv->brightness_prop) { dplane->prop.brightness = val - 256; @@ -453,7 +465,9 @@ int armada_overlay_plane_create(struct drm_device *dev, unsigned long crtcs) dplane->prop.colorkey_yr = 0xfefefe00; dplane->prop.colorkey_ug = 0x01010100; dplane->prop.colorkey_vb = 0x01010100; - dplane->prop.colorkey_mode = CFG_CKMODE(CKMODE_RGB); + dplane->prop.colorkey_mode = CFG_CKMODE(CKMODE_RGB) | + CFG_ALPHAM_GRA | CFG_ALPHA(0); + dplane->prop.colorkey_enable = ADV_GRACOLORKEY; dplane->prop.brightness = 0; dplane->prop.contrast = 0x4000; dplane->prop.saturation = 0x4000; -- cgit v1.2.3 From 92298c1cd8e8a6b56322b602ad72b54e6237631d Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 26 Jun 2018 17:06:06 +0100 Subject: drm/armada: fix irq handling Add the missing locks to the IRQ enable/disable paths, and fix a comment in the interrupt handler: reading the ISR clears down the status bits, but does not reset the interrupt so it can signal again. That seems to require a write. Signed-off-by: Russell King --- drivers/gpu/drm/armada/armada_crtc.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/armada/armada_crtc.c b/drivers/gpu/drm/armada/armada_crtc.c index 03eeee11dd5b..42a40daff132 100644 --- a/drivers/gpu/drm/armada/armada_crtc.c +++ b/drivers/gpu/drm/armada/armada_crtc.c @@ -519,8 +519,9 @@ static irqreturn_t armada_drm_irq(int irq, void *arg) u32 v, stat = readl_relaxed(dcrtc->base + LCD_SPU_IRQ_ISR); /* - * This is rediculous - rather than writing bits to clear, we - * have to set the actual status register value. This is racy. + * Reading the ISR appears to clear bits provided CLEAN_SPU_IRQ_ISR + * is set. Writing has some other effect to acknowledge the IRQ - + * without this, we only get a single IRQ. */ writel_relaxed(0, dcrtc->base + LCD_SPU_IRQ_ISR); @@ -1116,16 +1117,22 @@ armada_drm_crtc_set_property(struct drm_crtc *crtc, static int armada_drm_crtc_enable_vblank(struct drm_crtc *crtc) { struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc); + unsigned long flags; + spin_lock_irqsave(&dcrtc->irq_lock, flags); armada_drm_crtc_enable_irq(dcrtc, VSYNC_IRQ_ENA); + spin_unlock_irqrestore(&dcrtc->irq_lock, flags); return 0; } static void armada_drm_crtc_disable_vblank(struct drm_crtc *crtc) { struct armada_crtc *dcrtc = drm_to_armada_crtc(crtc); + unsigned long flags; + spin_lock_irqsave(&dcrtc->irq_lock, flags); armada_drm_crtc_disable_irq(dcrtc, VSYNC_IRQ_ENA); + spin_unlock_irqrestore(&dcrtc->irq_lock, flags); } static const struct drm_crtc_funcs armada_crtc_funcs = { @@ -1415,6 +1422,7 @@ static int armada_drm_crtc_create(struct drm_device *drm, struct device *dev, CFG_PDWN64x66, dcrtc->base + LCD_SPU_SRAM_PARA1); writel_relaxed(0x2032ff81, dcrtc->base + LCD_SPU_DMA_CTRL1); writel_relaxed(dcrtc->irq_ena, dcrtc->base + LCD_SPU_IRQ_ENA); + readl_relaxed(dcrtc->base + LCD_SPU_IRQ_ISR); writel_relaxed(0, dcrtc->base + LCD_SPU_IRQ_ISR); ret = devm_request_irq(dev, irq, armada_drm_irq, 0, "armada_drm_crtc", -- cgit v1.2.3 From 8db339d66774821091f73bd0e57c8a7511c5988e Mon Sep 17 00:00:00 2001 From: "benjamin.gaignard@linaro.org" Date: Fri, 6 Jul 2018 15:07:03 +0200 Subject: ASoC: stm32: replace "%p" with "%pK" The format specifier "%p" can leak kernel addresses. Use "%pK" instead. Signed-off-by: Benjamin Gaignard Signed-off-by: Mark Brown --- sound/soc/stm/stm32_adfsdm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/stm/stm32_adfsdm.c b/sound/soc/stm/stm32_adfsdm.c index db73fef3e500..0e9373064032 100644 --- a/sound/soc/stm/stm32_adfsdm.c +++ b/sound/soc/stm/stm32_adfsdm.c @@ -149,7 +149,7 @@ static int stm32_afsdm_pcm_cb(const void *data, size_t size, void *private) unsigned int old_pos = priv->pos; unsigned int cur_size = size; - dev_dbg(rtd->dev, "%s: buff_add :%p, pos = %d, size = %zu\n", + dev_dbg(rtd->dev, "%s: buff_add :%pK, pos = %d, size = %zu\n", __func__, &pcm_buff[priv->pos], priv->pos, size); if ((priv->pos + size) > buff_size) { -- cgit v1.2.3 From 9d1310daedae494874fe36a995172e64b06e29a4 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 6 Jul 2018 15:30:48 +0200 Subject: ASoC: pxa: make SND_PXA_SOC_SSP depend on PLAT_PXA For the moment, we can't enable CONFIG_SND_PXA_SOC_SSP unless we are building for ARM PXA or MMP: WARNING: unmet direct dependencies detected for PXA_SSP Depends on [n]: PLAT_PXA [=n] Selected by [y]: - SND_PXA_SOC_SSP [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] This adds an explicit dependency for it. Fixes: 0a94cf345740 ("ASoC: pxa: make SND_PXA2XX_SOC_I2S selectable") Signed-off-by: Arnd Bergmann Signed-off-by: Mark Brown --- sound/soc/pxa/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig index 2fc02c227f69..776e148b0aa2 100644 --- a/sound/soc/pxa/Kconfig +++ b/sound/soc/pxa/Kconfig @@ -34,6 +34,7 @@ config SND_PXA2XX_SOC_I2S config SND_PXA_SOC_SSP tristate "Soc Audio via PXA2xx/PXA3xx SSP ports" + depends on PLAT_PXA select PXA_SSP select SND_PXA2XX_LIB -- cgit v1.2.3 From 5bea327962fa296efd16f2d3369dd339ddd7ce6f Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Fri, 6 Jul 2018 16:19:14 +0300 Subject: ASoC: adau171x1: Connect playback DAI to the DSP The playback DAI is connected to the DSP and the DSP might be sourcing signals from the playback stream. Add a DAPM route between the two to make sure that the playback DAI is powered up, when the DSP is active. Signed-off-by: Lars-Peter Clausen Signed-off-by: Alexandru Ardelean Signed-off-by: Mark Brown --- sound/soc/codecs/adau17x1.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/codecs/adau17x1.c b/sound/soc/codecs/adau17x1.c index ae41edd1c406..57169b8ff14e 100644 --- a/sound/soc/codecs/adau17x1.c +++ b/sound/soc/codecs/adau17x1.c @@ -299,6 +299,7 @@ static const struct snd_soc_dapm_route adau17x1_dsp_dapm_routes[] = { { "DSP", NULL, "Left Decimator" }, { "DSP", NULL, "Right Decimator" }, + { "DSP", NULL, "Playback" }, }; static const struct snd_soc_dapm_route adau17x1_no_dsp_dapm_routes[] = { -- cgit v1.2.3 From 21d5e078192d244df3d6049f9464fff2f72cfd68 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Fri, 6 Jul 2018 20:06:05 +0200 Subject: netfilter: nft_compat: explicitly reject ERROR and standard target iptables-nft never requests these, but make this explicitly illegal. If it were quested, kernel could oops as ->eval is NULL, furthermore, the builtin targets have no owning module so its possible to rmmod eb/ip/ip6_tables module even if they would be loaded. Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nft_compat.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/net/netfilter/nft_compat.c b/net/netfilter/nft_compat.c index 8d1ff654e5af..32535eea51b2 100644 --- a/net/netfilter/nft_compat.c +++ b/net/netfilter/nft_compat.c @@ -832,10 +832,18 @@ nft_target_select_ops(const struct nft_ctx *ctx, rev = ntohl(nla_get_be32(tb[NFTA_TARGET_REV])); family = ctx->family; + if (strcmp(tg_name, XT_ERROR_TARGET) == 0 || + strcmp(tg_name, XT_STANDARD_TARGET) == 0 || + strcmp(tg_name, "standard") == 0) + return ERR_PTR(-EINVAL); + /* Re-use the existing target if it's already loaded. */ list_for_each_entry(nft_target, &nft_target_list, head) { struct xt_target *target = nft_target->ops.data; + if (!target->target) + continue; + if (nft_target_cmp(target, tg_name, rev, family)) return &nft_target->ops; } @@ -844,6 +852,11 @@ nft_target_select_ops(const struct nft_ctx *ctx, if (IS_ERR(target)) return ERR_PTR(-ENOENT); + if (!target->target) { + err = -EINVAL; + goto err; + } + if (target->targetsize > nla_len(tb[NFTA_TARGET_INFO])) { err = -EINVAL; goto err; -- cgit v1.2.3 From 2045cdfa1b40d66f126f3fd05604fc7c754f0022 Mon Sep 17 00:00:00 2001 From: Andrey Ryabinin Date: Fri, 6 Jul 2018 16:38:53 +0300 Subject: netfilter: nf_conntrack: Fix possible possible crash on module loading. Loading the nf_conntrack module with doubled hashsize parameter, i.e. modprobe nf_conntrack hashsize=12345 hashsize=12345 causes NULL-ptr deref. If 'hashsize' specified twice, the nf_conntrack_set_hashsize() function will be called also twice. The first nf_conntrack_set_hashsize() call will set the 'nf_conntrack_htable_size' variable: nf_conntrack_set_hashsize() ... /* On boot, we can set this without any fancy locking. */ if (!nf_conntrack_htable_size) return param_set_uint(val, kp); But on the second invocation, the nf_conntrack_htable_size is already set, so the nf_conntrack_set_hashsize() will take a different path and call the nf_conntrack_hash_resize() function. Which will crash on the attempt to dereference 'nf_conntrack_hash' pointer: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 RIP: 0010:nf_conntrack_hash_resize+0x255/0x490 [nf_conntrack] Call Trace: nf_conntrack_set_hashsize+0xcd/0x100 [nf_conntrack] parse_args+0x1f9/0x5a0 load_module+0x1281/0x1a50 __se_sys_finit_module+0xbe/0xf0 do_syscall_64+0x7c/0x390 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fix this, by checking !nf_conntrack_hash instead of !nf_conntrack_htable_size. nf_conntrack_hash will be initialized only after the module loaded, so the second invocation of the nf_conntrack_set_hashsize() won't crash, it will just reinitialize nf_conntrack_htable_size again. Signed-off-by: Andrey Ryabinin Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_conntrack_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index 3465da2a98bd..3d5280425027 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -2043,7 +2043,7 @@ int nf_conntrack_set_hashsize(const char *val, const struct kernel_param *kp) return -EOPNOTSUPP; /* On boot, we can set this without any fancy locking. */ - if (!nf_conntrack_htable_size) + if (!nf_conntrack_hash) return param_set_uint(val, kp); rc = kstrtouint(val, 0, &hashsize); -- cgit v1.2.3 From 84379c9afe011020e797e3f50a662b08a6355dcf Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Mon, 9 Jul 2018 13:43:38 +0200 Subject: netfilter: ipv6: nf_defrag: drop skb dst before queueing Eric Dumazet reports: Here is a reproducer of an annoying bug detected by syzkaller on our production kernel [..] ./b78305423 enable_conntrack Then : sleep 60 dmesg | tail -10 [ 171.599093] unregister_netdevice: waiting for lo to become free. Usage count = 2 [ 181.631024] unregister_netdevice: waiting for lo to become free. Usage count = 2 [ 191.687076] unregister_netdevice: waiting for lo to become free. Usage count = 2 [ 201.703037] unregister_netdevice: waiting for lo to become free. Usage count = 2 [ 211.711072] unregister_netdevice: waiting for lo to become free. Usage count = 2 [ 221.959070] unregister_netdevice: waiting for lo to become free. Usage count = 2 Reproducer sends ipv6 fragment that hits nfct defrag via LOCAL_OUT hook. skb gets queued until frag timer expiry -- 1 minute. Normally nf_conntrack_reasm gets called during prerouting, so skb has no dst yet which might explain why this wasn't spotted earlier. Reported-by: Eric Dumazet Reported-by: John Sperbeck Signed-off-by: Florian Westphal Tested-by: Eric Dumazet Reported-by: syzbot Signed-off-by: Pablo Neira Ayuso --- net/ipv6/netfilter/nf_conntrack_reasm.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c index a452d99c9f52..e4d9e6976d3c 100644 --- a/net/ipv6/netfilter/nf_conntrack_reasm.c +++ b/net/ipv6/netfilter/nf_conntrack_reasm.c @@ -585,6 +585,8 @@ int nf_ct_frag6_gather(struct net *net, struct sk_buff *skb, u32 user) fq->q.meat == fq->q.len && nf_ct_frag6_reasm(fq, skb, dev)) ret = 0; + else + skb_dst_drop(skb); out_unlock: spin_unlock_bh(&fq->q.lock); -- cgit v1.2.3 From 61c40f35f5cd6f67ccbd7319a1722eb78c815989 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Tue, 19 Jun 2018 14:34:45 +0200 Subject: clk: mvebu: armada-37xx-periph: Fix switching CPU rate from 300Mhz to 1.2GHz Switching the CPU from the L2 or L3 frequencies (300 and 200 Mhz respectively) to L0 frequency (1.2 Ghz) requires a significant amount of time to let VDD stabilize to the appropriate voltage. This amount of time is large enough that it cannot be covered by the hardware countdown register. Due to this, the CPU might start operating at L0 before the voltage is stabilized, leading to CPU stalls. To work around this problem, we prevent switching directly from the L2/L3 frequencies to the L0 frequency, and instead switch to the L1 frequency in-between. The sequence therefore becomes: 1. First switch from L2/L3(200/300MHz) to L1(600MHZ) 2. Sleep 20ms for stabling VDD voltage 3. Then switch from L1(600MHZ) to L0(1200Mhz). It is based on the work done by Ken Ma Cc: stable@vger.kernel.org Fixes: 2089dc33ea0e ("clk: mvebu: armada-37xx-periph: add DVFS support for cpu clocks") Signed-off-by: Gregory CLEMENT Signed-off-by: Stephen Boyd --- drivers/clk/mvebu/armada-37xx-periph.c | 38 ++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) diff --git a/drivers/clk/mvebu/armada-37xx-periph.c b/drivers/clk/mvebu/armada-37xx-periph.c index 6860bd5a37c5..44e4e27eddad 100644 --- a/drivers/clk/mvebu/armada-37xx-periph.c +++ b/drivers/clk/mvebu/armada-37xx-periph.c @@ -35,6 +35,7 @@ #define CLK_SEL 0x10 #define CLK_DIS 0x14 +#define ARMADA_37XX_DVFS_LOAD_1 1 #define LOAD_LEVEL_NR 4 #define ARMADA_37XX_NB_L0L1 0x18 @@ -507,6 +508,40 @@ static long clk_pm_cpu_round_rate(struct clk_hw *hw, unsigned long rate, return -EINVAL; } +/* + * Switching the CPU from the L2 or L3 frequencies (300 and 200 Mhz + * respectively) to L0 frequency (1.2 Ghz) requires a significant + * amount of time to let VDD stabilize to the appropriate + * voltage. This amount of time is large enough that it cannot be + * covered by the hardware countdown register. Due to this, the CPU + * might start operating at L0 before the voltage is stabilized, + * leading to CPU stalls. + * + * To work around this problem, we prevent switching directly from the + * L2/L3 frequencies to the L0 frequency, and instead switch to the L1 + * frequency in-between. The sequence therefore becomes: + * 1. First switch from L2/L3(200/300MHz) to L1(600MHZ) + * 2. Sleep 20ms for stabling VDD voltage + * 3. Then switch from L1(600MHZ) to L0(1200Mhz). + */ +static void clk_pm_cpu_set_rate_wa(unsigned long rate, struct regmap *base) +{ + unsigned int cur_level; + + if (rate != 1200 * 1000 * 1000) + return; + + regmap_read(base, ARMADA_37XX_NB_CPU_LOAD, &cur_level); + cur_level &= ARMADA_37XX_NB_CPU_LOAD_MASK; + if (cur_level <= ARMADA_37XX_DVFS_LOAD_1) + return; + + regmap_update_bits(base, ARMADA_37XX_NB_CPU_LOAD, + ARMADA_37XX_NB_CPU_LOAD_MASK, + ARMADA_37XX_DVFS_LOAD_1); + msleep(20); +} + static int clk_pm_cpu_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate) { @@ -537,6 +572,9 @@ static int clk_pm_cpu_set_rate(struct clk_hw *hw, unsigned long rate, */ reg = ARMADA_37XX_NB_CPU_LOAD; mask = ARMADA_37XX_NB_CPU_LOAD_MASK; + + clk_pm_cpu_set_rate_wa(rate, base); + regmap_update_bits(base, reg, mask, load_level); return rate; -- cgit v1.2.3 From 5f3417569165a8ee57654217f73e0160312f409c Mon Sep 17 00:00:00 2001 From: Sean Paul Date: Tue, 3 Jul 2018 12:56:03 -0400 Subject: drm/bridge: adv7511: Reset registers on hotplug The bridge loses its hw state when the cable is unplugged. If we detect this case in the hpd handler, reset its state. Reported-by: Rob Clark Tested-by: Rob Clark Reviewed-by: Archit Taneja Signed-off-by: Sean Paul Link: https://patchwork.freedesktop.org/patch/msgid/20180703165648.120401-1-seanpaul@chromium.org --- drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c index 73021b388e12..dd3ff2f2cdce 100644 --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c @@ -429,6 +429,18 @@ static void adv7511_hpd_work(struct work_struct *work) else status = connector_status_disconnected; + /* + * The bridge resets its registers on unplug. So when we get a plug + * event and we're already supposed to be powered, cycle the bridge to + * restore its state. + */ + if (status == connector_status_connected && + adv7511->connector.status == connector_status_disconnected && + adv7511->powered) { + regcache_mark_dirty(adv7511->regmap); + adv7511_power_on(adv7511); + } + if (adv7511->connector.status != status) { adv7511->connector.status = status; if (status == connector_status_disconnected) -- cgit v1.2.3 From 35a88a18d7ea58600e11590405bc93b08e16e7f5 Mon Sep 17 00:00:00 2001 From: Dexuan Cui Date: Mon, 9 Jul 2018 13:16:07 -0500 Subject: PCI: hv: Disable/enable IRQs rather than BH in hv_compose_msi_msg() Commit de0aa7b2f97d ("PCI: hv: Fix 2 hang issues in hv_compose_msi_msg()") uses local_bh_disable()/enable(), because hv_pci_onchannelcallback() can also run in tasklet context as the channel event callback, so bottom halves should be disabled to prevent a race condition. With CONFIG_PROVE_LOCKING=y in the recent mainline, or old kernels that don't have commit f71b74bca637 ("irq/softirqs: Use lockdep to assert IRQs are disabled/enabled"), when the upper layer IRQ code calls hv_compose_msi_msg() with local IRQs disabled, we'll see a warning at the beginning of __local_bh_enable_ip(): IRQs not enabled as expected WARNING: CPU: 0 PID: 408 at kernel/softirq.c:162 __local_bh_enable_ip The warning exposes an issue in de0aa7b2f97d: local_bh_enable() can potentially call do_softirq(), which is not supposed to run when local IRQs are disabled. Let's fix this by using local_irq_save()/restore() instead. Note: hv_pci_onchannelcallback() is not a hot path because it's only called when the PCI device is hot added and removed, which is infrequent. Fixes: de0aa7b2f97d ("PCI: hv: Fix 2 hang issues in hv_compose_msi_msg()") Signed-off-by: Dexuan Cui Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Reviewed-by: Haiyang Zhang Cc: stable@vger.kernel.org Cc: Stephen Hemminger Cc: K. Y. Srinivasan --- drivers/pci/controller/pci-hyperv.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c index 6cc5036ac83c..f6325f1a89e8 100644 --- a/drivers/pci/controller/pci-hyperv.c +++ b/drivers/pci/controller/pci-hyperv.c @@ -1073,6 +1073,7 @@ static void hv_compose_msi_msg(struct irq_data *data, struct msi_msg *msg) struct pci_bus *pbus; struct pci_dev *pdev; struct cpumask *dest; + unsigned long flags; struct compose_comp_ctxt comp; struct tran_int_desc *int_desc; struct { @@ -1164,14 +1165,15 @@ static void hv_compose_msi_msg(struct irq_data *data, struct msi_msg *msg) * the channel callback directly when channel->target_cpu is * the current CPU. When the higher level interrupt code * calls us with interrupt enabled, let's add the - * local_bh_disable()/enable() to avoid race. + * local_irq_save()/restore() to avoid race: + * hv_pci_onchannelcallback() can also run in tasklet. */ - local_bh_disable(); + local_irq_save(flags); if (hbus->hdev->channel->target_cpu == smp_processor_id()) hv_pci_onchannelcallback(hbus); - local_bh_enable(); + local_irq_restore(flags); if (hpdev->state == hv_pcichild_ejecting) { dev_err_once(&hbus->hdev->device, -- cgit v1.2.3 From ec58ba16e174d7ca24c8955a21cd0a53e0c32fdf Mon Sep 17 00:00:00 2001 From: Gustavo Pimentel Date: Fri, 6 Jul 2018 11:32:37 +0100 Subject: ARC: [plat-hsdk]: Configure APB GPIO controller on ARC HSDK platform In case of HSDK we have intermediate INTC in for of DW APB GPIO controller which is used as a de-bounce logic for interrupt wires that come from outside the board. We cannot use existing "irq-dw-apb-ictl" driver here because all input lines are routed to corresponding output lines but not muxed into one line (this is configured in RTL and we cannot change this in software). But even if we add such a feature to "irq-dw-apb-ictl" driver that won't benefit us as higher-level INTC (in case of HSDK it is IDU) anyways has per-input control so adding fully-controller intermediate INTC will only bring some overhead on interrupt processing but no other benefits. Thus we just do one-time configuration of DW APB GPIO controller and forget about it. Based on implementation available on arch/arc/plat-axs10x/axs10x.c file. Acked-by: Alexey Brodkin Signed-off-by: Gustavo Pimentel Signed-off-by: Vineet Gupta --- arch/arc/plat-hsdk/platform.c | 62 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 62 insertions(+) diff --git a/arch/arc/plat-hsdk/platform.c b/arch/arc/plat-hsdk/platform.c index 2958aedb649a..2588b842407c 100644 --- a/arch/arc/plat-hsdk/platform.c +++ b/arch/arc/plat-hsdk/platform.c @@ -42,6 +42,66 @@ static void __init hsdk_init_per_cpu(unsigned int cpu) #define SDIO_UHS_REG_EXT (SDIO_BASE + 0x108) #define SDIO_UHS_REG_EXT_DIV_2 (2 << 30) +#define HSDK_GPIO_INTC (ARC_PERIPHERAL_BASE + 0x3000) + +static void __init hsdk_enable_gpio_intc_wire(void) +{ + /* + * Peripherals on CPU Card are wired to cpu intc via intermediate + * DW APB GPIO blocks (mainly for debouncing) + * + * --------------------- + * | snps,archs-intc | + * --------------------- + * | + * ---------------------- + * | snps,archs-idu-intc | + * ---------------------- + * | | | | | + * | [eth] [USB] [... other peripherals] + * | + * ------------------- + * | snps,dw-apb-intc | + * ------------------- + * | | | | + * [Bt] [HAPS] [... other peripherals] + * + * Current implementation of "irq-dw-apb-ictl" driver doesn't work well + * with stacked INTCs. In particular problem happens if its master INTC + * not yet instantiated. See discussion here - + * https://lkml.org/lkml/2015/3/4/755 + * + * So setup the first gpio block as a passive pass thru and hide it from + * DT hardware topology - connect intc directly to cpu intc + * The GPIO "wire" needs to be init nevertheless (here) + * + * One side adv is that peripheral interrupt handling avoids one nested + * intc ISR hop + * + * According to HSDK User's Manual [1], "Table 2 Interrupt Mapping" + * we have the following GPIO input lines used as sources of interrupt: + * - GPIO[0] - Bluetooth interrupt of RS9113 module + * - GPIO[2] - HAPS interrupt (on HapsTrak 3 connector) + * - GPIO[3] - Audio codec (MAX9880A) interrupt + * - GPIO[8-23] - Available on Arduino and PMOD_x headers + * For now there's no use of Arduino and PMOD_x headers in Linux + * use-case so we only enable lines 0, 2 and 3. + * + * [1] https://github.com/foss-for-synopsys-dwc-arc-processors/ARC-Development-Systems-Forum/wiki/docs/ARC_HSDK_User_Guide.pdf + */ +#define GPIO_INTEN (HSDK_GPIO_INTC + 0x30) +#define GPIO_INTMASK (HSDK_GPIO_INTC + 0x34) +#define GPIO_INTTYPE_LEVEL (HSDK_GPIO_INTC + 0x38) +#define GPIO_INT_POLARITY (HSDK_GPIO_INTC + 0x3c) +#define GPIO_INT_CONNECTED_MASK 0x0d + + iowrite32(0xffffffff, (void __iomem *) GPIO_INTMASK); + iowrite32(~GPIO_INT_CONNECTED_MASK, (void __iomem *) GPIO_INTMASK); + iowrite32(0x00000000, (void __iomem *) GPIO_INTTYPE_LEVEL); + iowrite32(0xffffffff, (void __iomem *) GPIO_INT_POLARITY); + iowrite32(GPIO_INT_CONNECTED_MASK, (void __iomem *) GPIO_INTEN); +} + static void __init hsdk_init_early(void) { /* @@ -62,6 +122,8 @@ static void __init hsdk_init_early(void) * minimum possible div-by-2. */ iowrite32(SDIO_UHS_REG_EXT_DIV_2, (void __iomem *) SDIO_UHS_REG_EXT); + + hsdk_enable_gpio_intc_wire(); } static const char *hsdk_compat[] __initconst = { -- cgit v1.2.3 From e8708786d4fe21c043d38d760f768949a3d71185 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 19 Jun 2018 17:22:05 +0300 Subject: ARC: Improve cmpxchg syscall implementation This is used in configs lacking hardware atomics to emulate atomic r-m-w for user space, implemented by disabling preemption in kernel. However there are issues in current implementation: 1. Process not terminated if invalid user pointer passed: i.e. __get_user() failed. 2. The reason for this patch was __put_user() failure not being handled either, specifically for the COW break scenario. The zero page is initially wired up and read from __get_user() succeeds. A subsequent write by __put_user() induces a Protection Violation, but COW can't finish as Linux page fault handler is disabled due to preempt disable. And what's worse is we silently return the stale value to user space. Fix this specific case by re-enabling preemption and explicitly fixing up the fault and retrying the whole sequence over. Cc: Max Filippov Cc: linux-arch@vger.kernel.org Signed-off-by: Alexey Brodkin Signed-off-by: Peter Zijlstra Signed-off-by: Vineet Gupta [vgupta: rewrote the changelog] --- arch/arc/kernel/process.c | 47 ++++++++++++++++++++++++++++++++++++----------- 1 file changed, 36 insertions(+), 11 deletions(-) diff --git a/arch/arc/kernel/process.c b/arch/arc/kernel/process.c index 5ac3b547453f..4674541eba3f 100644 --- a/arch/arc/kernel/process.c +++ b/arch/arc/kernel/process.c @@ -47,7 +47,8 @@ SYSCALL_DEFINE0(arc_gettls) SYSCALL_DEFINE3(arc_usr_cmpxchg, int *, uaddr, int, expected, int, new) { struct pt_regs *regs = current_pt_regs(); - int uval = -EFAULT; + u32 uval; + int ret; /* * This is only for old cores lacking LLOCK/SCOND, which by defintion @@ -60,23 +61,47 @@ SYSCALL_DEFINE3(arc_usr_cmpxchg, int *, uaddr, int, expected, int, new) /* Z indicates to userspace if operation succeded */ regs->status32 &= ~STATUS_Z_MASK; - if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int))) - return -EFAULT; + ret = access_ok(VERIFY_WRITE, uaddr, sizeof(*uaddr)); + if (!ret) + goto fail; +again: preempt_disable(); - if (__get_user(uval, uaddr)) - goto done; + ret = __get_user(uval, uaddr); + if (ret) + goto fault; - if (uval == expected) { - if (!__put_user(new, uaddr)) - regs->status32 |= STATUS_Z_MASK; - } + if (uval != expected) + goto out; -done: - preempt_enable(); + ret = __put_user(new, uaddr); + if (ret) + goto fault; + + regs->status32 |= STATUS_Z_MASK; +out: + preempt_enable(); return uval; + +fault: + preempt_enable(); + + if (unlikely(ret != -EFAULT)) + goto fail; + + down_read(¤t->mm->mmap_sem); + ret = fixup_user_fault(current, current->mm, (unsigned long) uaddr, + FAULT_FLAG_WRITE, NULL); + up_read(¤t->mm->mmap_sem); + + if (likely(!ret)) + goto again; + +fail: + force_sig(SIGSEGV, current); + return ret; } #ifdef CONFIG_ISA_ARCV2 -- cgit v1.2.3 From 29c2068fdaa51c89af31ea6b83dd1108b2349816 Mon Sep 17 00:00:00 2001 From: Anders Roxell Date: Tue, 26 Jun 2018 17:28:51 +0200 Subject: ARC: configs: remove no longer needed CONFIG_DEVPTS_MULTIPLE_INSTANCES Since commit eedf265aa003 ("devpts: Make each mount of devpts an independent filesystem.") CONFIG_DEVPTS_MULTIPLE_INSTANCES isn't needed in the defconfig anymore. Signed-off-by: Anders Roxell Signed-off-by: Vineet Gupta --- arch/arc/configs/tb10x_defconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arc/configs/tb10x_defconfig b/arch/arc/configs/tb10x_defconfig index 1aca2e8fd1ba..2cc87f909747 100644 --- a/arch/arc/configs/tb10x_defconfig +++ b/arch/arc/configs/tb10x_defconfig @@ -56,7 +56,6 @@ CONFIG_STMMAC_ETH=y # CONFIG_INPUT is not set # CONFIG_SERIO is not set # CONFIG_VT is not set -CONFIG_DEVPTS_MULTIPLE_INSTANCES=y # CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set CONFIG_SERIAL_8250=y -- cgit v1.2.3 From 64234961c145606b36eaa82c47b11be842b21049 Mon Sep 17 00:00:00 2001 From: Alexey Brodkin Date: Wed, 6 Jun 2018 15:59:38 +0300 Subject: ARC: configs: Remove CONFIG_INITRAMFS_SOURCE from defconfigs We used to have pre-set CONFIG_INITRAMFS_SOURCE with local path to intramfs in ARC defconfigs. This was quite convenient for in-house development but not that convenient for newcomers who obviusly don't have folders like "arc_initramfs" next to the Linux source tree. Which leads to quite surprising failure of defconfig building: ------------------------------->8----------------------------- ../scripts/gen_initramfs_list.sh: Cannot open '../../arc_initramfs_hs/' ../usr/Makefile:57: recipe for target 'usr/initramfs_data.cpio.gz' failed make[2]: *** [usr/initramfs_data.cpio.gz] Error 1 ------------------------------->8----------------------------- So now when more and more people start to deal with our defconfigs let's make their life easier with removal of CONFIG_INITRAMFS_SOURCE. Signed-off-by: Alexey Brodkin Cc: Kevin Hilman Cc: stable@vger.kernel.org Signed-off-by: Alexey Brodkin Signed-off-by: Vineet Gupta --- arch/arc/configs/axs101_defconfig | 1 - arch/arc/configs/axs103_defconfig | 1 - arch/arc/configs/axs103_smp_defconfig | 1 - arch/arc/configs/haps_hs_defconfig | 1 - arch/arc/configs/haps_hs_smp_defconfig | 1 - arch/arc/configs/hsdk_defconfig | 1 - arch/arc/configs/nsim_700_defconfig | 1 - arch/arc/configs/nsim_hs_defconfig | 1 - arch/arc/configs/nsim_hs_smp_defconfig | 1 - arch/arc/configs/nsimosci_defconfig | 1 - arch/arc/configs/nsimosci_hs_defconfig | 1 - arch/arc/configs/nsimosci_hs_smp_defconfig | 1 - 12 files changed, 12 deletions(-) diff --git a/arch/arc/configs/axs101_defconfig b/arch/arc/configs/axs101_defconfig index 09f85154c5a4..a635ea972304 100644 --- a/arch/arc/configs/axs101_defconfig +++ b/arch/arc/configs/axs101_defconfig @@ -11,7 +11,6 @@ CONFIG_NAMESPACES=y # CONFIG_UTS_NS is not set # CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="../arc_initramfs/" CONFIG_EMBEDDED=y CONFIG_PERF_EVENTS=y # CONFIG_VM_EVENT_COUNTERS is not set diff --git a/arch/arc/configs/axs103_defconfig b/arch/arc/configs/axs103_defconfig index 09fed3ef22b6..aa507e423075 100644 --- a/arch/arc/configs/axs103_defconfig +++ b/arch/arc/configs/axs103_defconfig @@ -11,7 +11,6 @@ CONFIG_NAMESPACES=y # CONFIG_UTS_NS is not set # CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="../../arc_initramfs_hs/" CONFIG_EMBEDDED=y CONFIG_PERF_EVENTS=y # CONFIG_VM_EVENT_COUNTERS is not set diff --git a/arch/arc/configs/axs103_smp_defconfig b/arch/arc/configs/axs103_smp_defconfig index ea2f6d817d1a..eba07f468654 100644 --- a/arch/arc/configs/axs103_smp_defconfig +++ b/arch/arc/configs/axs103_smp_defconfig @@ -11,7 +11,6 @@ CONFIG_NAMESPACES=y # CONFIG_UTS_NS is not set # CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="../../arc_initramfs_hs/" CONFIG_EMBEDDED=y CONFIG_PERF_EVENTS=y # CONFIG_VM_EVENT_COUNTERS is not set diff --git a/arch/arc/configs/haps_hs_defconfig b/arch/arc/configs/haps_hs_defconfig index ab231c040efe..098b19fbaa51 100644 --- a/arch/arc/configs/haps_hs_defconfig +++ b/arch/arc/configs/haps_hs_defconfig @@ -11,7 +11,6 @@ CONFIG_NAMESPACES=y # CONFIG_UTS_NS is not set # CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="../../arc_initramfs_hs/" CONFIG_EXPERT=y CONFIG_PERF_EVENTS=y # CONFIG_COMPAT_BRK is not set diff --git a/arch/arc/configs/haps_hs_smp_defconfig b/arch/arc/configs/haps_hs_smp_defconfig index cf449cbf440d..0104c404d897 100644 --- a/arch/arc/configs/haps_hs_smp_defconfig +++ b/arch/arc/configs/haps_hs_smp_defconfig @@ -11,7 +11,6 @@ CONFIG_NAMESPACES=y # CONFIG_UTS_NS is not set # CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="../../arc_initramfs_hs/" CONFIG_EMBEDDED=y CONFIG_PERF_EVENTS=y # CONFIG_VM_EVENT_COUNTERS is not set diff --git a/arch/arc/configs/hsdk_defconfig b/arch/arc/configs/hsdk_defconfig index 1b54c72f4296..6491be0ddbc9 100644 --- a/arch/arc/configs/hsdk_defconfig +++ b/arch/arc/configs/hsdk_defconfig @@ -9,7 +9,6 @@ CONFIG_NAMESPACES=y # CONFIG_UTS_NS is not set # CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="../../arc_initramfs_hs/" CONFIG_EMBEDDED=y CONFIG_PERF_EVENTS=y # CONFIG_VM_EVENT_COUNTERS is not set diff --git a/arch/arc/configs/nsim_700_defconfig b/arch/arc/configs/nsim_700_defconfig index 31c2c70b34a1..99e05cf63fca 100644 --- a/arch/arc/configs/nsim_700_defconfig +++ b/arch/arc/configs/nsim_700_defconfig @@ -11,7 +11,6 @@ CONFIG_NAMESPACES=y # CONFIG_UTS_NS is not set # CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="../arc_initramfs/" CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y CONFIG_PERF_EVENTS=y diff --git a/arch/arc/configs/nsim_hs_defconfig b/arch/arc/configs/nsim_hs_defconfig index a578c721d50f..0dc4f9b737e7 100644 --- a/arch/arc/configs/nsim_hs_defconfig +++ b/arch/arc/configs/nsim_hs_defconfig @@ -11,7 +11,6 @@ CONFIG_NAMESPACES=y # CONFIG_UTS_NS is not set # CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="../../arc_initramfs_hs/" CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y CONFIG_PERF_EVENTS=y diff --git a/arch/arc/configs/nsim_hs_smp_defconfig b/arch/arc/configs/nsim_hs_smp_defconfig index 37d7395f3272..be3c30a15e54 100644 --- a/arch/arc/configs/nsim_hs_smp_defconfig +++ b/arch/arc/configs/nsim_hs_smp_defconfig @@ -9,7 +9,6 @@ CONFIG_NAMESPACES=y # CONFIG_UTS_NS is not set # CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="../arc_initramfs_hs/" CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y CONFIG_PERF_EVENTS=y diff --git a/arch/arc/configs/nsimosci_defconfig b/arch/arc/configs/nsimosci_defconfig index 1e1470e2a7f0..3a74b9b21772 100644 --- a/arch/arc/configs/nsimosci_defconfig +++ b/arch/arc/configs/nsimosci_defconfig @@ -11,7 +11,6 @@ CONFIG_NAMESPACES=y # CONFIG_UTS_NS is not set # CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="../arc_initramfs/" CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y CONFIG_PERF_EVENTS=y diff --git a/arch/arc/configs/nsimosci_hs_defconfig b/arch/arc/configs/nsimosci_hs_defconfig index 084a6e42685b..ea2834b4dc1d 100644 --- a/arch/arc/configs/nsimosci_hs_defconfig +++ b/arch/arc/configs/nsimosci_hs_defconfig @@ -11,7 +11,6 @@ CONFIG_NAMESPACES=y # CONFIG_UTS_NS is not set # CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="../arc_initramfs_hs/" CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y CONFIG_PERF_EVENTS=y diff --git a/arch/arc/configs/nsimosci_hs_smp_defconfig b/arch/arc/configs/nsimosci_hs_smp_defconfig index f36d47990415..80a5a1b4924b 100644 --- a/arch/arc/configs/nsimosci_hs_smp_defconfig +++ b/arch/arc/configs/nsimosci_hs_smp_defconfig @@ -9,7 +9,6 @@ CONFIG_IKCONFIG_PROC=y # CONFIG_UTS_NS is not set # CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="../arc_initramfs_hs/" CONFIG_PERF_EVENTS=y # CONFIG_COMPAT_BRK is not set CONFIG_KPROBES=y -- cgit v1.2.3 From ca1147fc2487335e9d1d7a931996eae176863a4c Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Wed, 27 Jun 2018 16:00:32 -0700 Subject: ARC: [arcompact] entry.S: minor code movement This is a non functional code changw, which moves r25 restore from macro into the caller of macro Signed-off-by: Vineet Gupta --- arch/arc/include/asm/entry-compact.h | 6 ++++++ arch/arc/include/asm/entry.h | 3 --- 2 files changed, 6 insertions(+), 3 deletions(-) diff --git a/arch/arc/include/asm/entry-compact.h b/arch/arc/include/asm/entry-compact.h index ec36d5b6d435..29f3988c9424 100644 --- a/arch/arc/include/asm/entry-compact.h +++ b/arch/arc/include/asm/entry-compact.h @@ -234,6 +234,9 @@ POP gp RESTORE_R12_TO_R0 +#ifdef CONFIG_ARC_CURR_IN_REG + ld r25, [sp, 12] +#endif ld sp, [sp] /* restore original sp */ /* orig_r0, ECR, user_r25 skipped automatically */ .endm @@ -315,6 +318,9 @@ POP gp RESTORE_R12_TO_R0 +#ifdef CONFIG_ARC_CURR_IN_REG + ld r25, [sp, 12] +#endif ld sp, [sp] /* restore original sp */ /* orig_r0, ECR, user_r25 skipped automatically */ .endm diff --git a/arch/arc/include/asm/entry.h b/arch/arc/include/asm/entry.h index 51597f344a62..302b0db8ea2b 100644 --- a/arch/arc/include/asm/entry.h +++ b/arch/arc/include/asm/entry.h @@ -86,9 +86,6 @@ POP r1 POP r0 -#ifdef CONFIG_ARC_CURR_IN_REG - ld r25, [sp, 12] -#endif .endm /*-------------------------------------------------------------- -- cgit v1.2.3 From 6e3761145a9ba3ce267c330b6bff51cf6a057b06 Mon Sep 17 00:00:00 2001 From: Alexey Brodkin Date: Thu, 28 Jun 2018 16:59:14 -0700 Subject: ARC: Fix CONFIG_SWAP swap was broken on ARC due to silly copy-paste issue. We encode offset from swapcache page in __swp_entry() as (off << 13) but were not decoding back in __swp_offset() as (off >> 13) - it was still (off << 13). This finally fixes swap usage on ARC. | # mkswap /dev/sda2 | | # swapon -a -e /dev/sda2 | Adding 500728k swap on /dev/sda2. Priority:-2 extents:1 across:500728k | | # free | total used free shared buffers cached | Mem: 765104 13456 751648 4736 8 4736 | -/+ buffers/cache: 8712 756392 | Swap: 500728 0 500728 Cc: stable@vger.kernel.org Signed-off-by: Alexey Brodkin Signed-off-by: Vineet Gupta --- arch/arc/include/asm/pgtable.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arc/include/asm/pgtable.h b/arch/arc/include/asm/pgtable.h index 08fe33830d4b..77676e18da69 100644 --- a/arch/arc/include/asm/pgtable.h +++ b/arch/arc/include/asm/pgtable.h @@ -379,7 +379,7 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, /* Decode a PTE containing swap "identifier "into constituents */ #define __swp_type(pte_lookalike) (((pte_lookalike).val) & 0x1f) -#define __swp_offset(pte_lookalike) ((pte_lookalike).val << 13) +#define __swp_offset(pte_lookalike) ((pte_lookalike).val >> 13) /* NOPs, to keep generic kernel happy */ #define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) -- cgit v1.2.3 From a83a2173441698f7ac9867b93bcca21cf18a032d Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Mon, 9 Jul 2018 15:18:56 -0500 Subject: PCI: endpoint: Fix NULL pointer dereference error when CONFIGFS is disabled commit ef1433f717a2 ("PCI: endpoint: Create configfs entry for each pci_epf_device_id table entry") while adding configfs entry for each pci_epf_device_id table entry introduced a NULL pointer dereference error when CONFIG_PCI_ENDPOINT_CONFIGFS is not enabled. Fix it here. Fixes: ef1433f717a2 ("PCI: endpoint: Create configfs entry for each pci_epf_device_id table entry") Signed-off-by: Kishon Vijay Abraham I [lorenzo.pieralisi: updated commit log] Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas --- drivers/pci/endpoint/pci-epf-core.c | 62 +++++++++++++++++++++++++------------ 1 file changed, 43 insertions(+), 19 deletions(-) diff --git a/drivers/pci/endpoint/pci-epf-core.c b/drivers/pci/endpoint/pci-epf-core.c index bf53fad636a5..825fa24427a3 100644 --- a/drivers/pci/endpoint/pci-epf-core.c +++ b/drivers/pci/endpoint/pci-epf-core.c @@ -137,25 +137,60 @@ void *pci_epf_alloc_space(struct pci_epf *epf, size_t size, enum pci_barno bar) } EXPORT_SYMBOL_GPL(pci_epf_alloc_space); -/** - * pci_epf_unregister_driver() - unregister the PCI EPF driver - * @driver: the PCI EPF driver that has to be unregistered - * - * Invoke to unregister the PCI EPF driver. - */ -void pci_epf_unregister_driver(struct pci_epf_driver *driver) +static void pci_epf_remove_cfs(struct pci_epf_driver *driver) { struct config_group *group, *tmp; + if (!IS_ENABLED(CONFIG_PCI_ENDPOINT_CONFIGFS)) + return; + mutex_lock(&pci_epf_mutex); list_for_each_entry_safe(group, tmp, &driver->epf_group, group_entry) pci_ep_cfs_remove_epf_group(group); list_del(&driver->epf_group); mutex_unlock(&pci_epf_mutex); +} + +/** + * pci_epf_unregister_driver() - unregister the PCI EPF driver + * @driver: the PCI EPF driver that has to be unregistered + * + * Invoke to unregister the PCI EPF driver. + */ +void pci_epf_unregister_driver(struct pci_epf_driver *driver) +{ + pci_epf_remove_cfs(driver); driver_unregister(&driver->driver); } EXPORT_SYMBOL_GPL(pci_epf_unregister_driver); +static int pci_epf_add_cfs(struct pci_epf_driver *driver) +{ + struct config_group *group; + const struct pci_epf_device_id *id; + + if (!IS_ENABLED(CONFIG_PCI_ENDPOINT_CONFIGFS)) + return 0; + + INIT_LIST_HEAD(&driver->epf_group); + + id = driver->id_table; + while (id->name[0]) { + group = pci_ep_cfs_add_epf_group(id->name); + if (IS_ERR(group)) { + pci_epf_remove_cfs(driver); + return PTR_ERR(group); + } + + mutex_lock(&pci_epf_mutex); + list_add_tail(&group->group_entry, &driver->epf_group); + mutex_unlock(&pci_epf_mutex); + id++; + } + + return 0; +} + /** * __pci_epf_register_driver() - register a new PCI EPF driver * @driver: structure representing PCI EPF driver @@ -167,8 +202,6 @@ int __pci_epf_register_driver(struct pci_epf_driver *driver, struct module *owner) { int ret; - struct config_group *group; - const struct pci_epf_device_id *id; if (!driver->ops) return -EINVAL; @@ -183,16 +216,7 @@ int __pci_epf_register_driver(struct pci_epf_driver *driver, if (ret) return ret; - INIT_LIST_HEAD(&driver->epf_group); - - id = driver->id_table; - while (id->name[0]) { - group = pci_ep_cfs_add_epf_group(id->name); - mutex_lock(&pci_epf_mutex); - list_add_tail(&group->group_entry, &driver->epf_group); - mutex_unlock(&pci_epf_mutex); - id++; - } + pci_epf_add_cfs(driver); return 0; } -- cgit v1.2.3 From 96a85cc517a9ee4ae5e8d7f5a36cba05023784eb Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Thu, 14 Jun 2018 20:56:25 +0300 Subject: drm/i915: Fix hotplug irq ack on i965/g4x MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Just like with PIPESTAT, the edge triggered IIR on i965/g4x also causes problems for hotplug interrupts. To make sure we don't get the IIR port interrupt bit stuck low with the ISR bit high we must force an edge in ISR. Unfortunately we can't borrow the PIPESTAT trick and toggle the enable bits in PORT_HOTPLUG_EN as that act itself generates hotplug interrupts. Instead we just have to loop until we've cleared PORT_HOTPLUG_STAT, or we just give up and WARN. v2: Don't frob with PORT_HOTPLUG_EN Cc: stable@vger.kernel.org Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20180614175625.1615-1-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak (cherry picked from commit 0ba7c51a6fd80a89236f6ceb52e63f8a7f62bfd3) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/i915/i915_irq.c | 32 ++++++++++++++++++++++++++++++-- 1 file changed, 30 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 4a02747ac658..c16cb025755e 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -1998,10 +1998,38 @@ static void valleyview_pipestat_irq_handler(struct drm_i915_private *dev_priv, static u32 i9xx_hpd_irq_ack(struct drm_i915_private *dev_priv) { - u32 hotplug_status = I915_READ(PORT_HOTPLUG_STAT); + u32 hotplug_status = 0, hotplug_status_mask; + int i; + + if (IS_G4X(dev_priv) || + IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) + hotplug_status_mask = HOTPLUG_INT_STATUS_G4X | + DP_AUX_CHANNEL_MASK_INT_STATUS_G4X; + else + hotplug_status_mask = HOTPLUG_INT_STATUS_I915; - if (hotplug_status) + /* + * We absolutely have to clear all the pending interrupt + * bits in PORT_HOTPLUG_STAT. Otherwise the ISR port + * interrupt bit won't have an edge, and the i965/g4x + * edge triggered IIR will not notice that an interrupt + * is still pending. We can't use PORT_HOTPLUG_EN to + * guarantee the edge as the act of toggling the enable + * bits can itself generate a new hotplug interrupt :( + */ + for (i = 0; i < 10; i++) { + u32 tmp = I915_READ(PORT_HOTPLUG_STAT) & hotplug_status_mask; + + if (tmp == 0) + return hotplug_status; + + hotplug_status |= tmp; I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status); + } + + WARN_ONCE(1, + "PORT_HOTPLUG_STAT did not clear (0x%08x)\n", + I915_READ(PORT_HOTPLUG_STAT)); return hotplug_status; } -- cgit v1.2.3 From e32d4e60b350124065e0ffd9c91ac13a439aee9a Mon Sep 17 00:00:00 2001 From: Venkat Duvvuru Date: Mon, 9 Jul 2018 02:24:47 -0400 Subject: bnxt_en: Fix the vlan_tci exact match check. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It is possible that OVS may set don’t care for DEI/CFI bit in vlan_tci mask. Hence, checking for vlan_tci exact match will endup in a vlan flow rejection. This patch fixes the problem by checking for vlan_pcp and vid separately, instead of checking for the entire vlan_tci. Fixes: e85a9be93cf1 (bnxt_en: do not allow wildcard matches for L2 flows) Signed-off-by: Venkat Duvvuru Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c | 30 +++++++++++++++++++++++++--- 1 file changed, 27 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c index 795f45024c20..491bd40a254d 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c @@ -27,6 +27,15 @@ #define BNXT_FID_INVALID 0xffff #define VLAN_TCI(vid, prio) ((vid) | ((prio) << VLAN_PRIO_SHIFT)) +#define is_vlan_pcp_wildcarded(vlan_tci_mask) \ + ((ntohs(vlan_tci_mask) & VLAN_PRIO_MASK) == 0x0000) +#define is_vlan_pcp_exactmatch(vlan_tci_mask) \ + ((ntohs(vlan_tci_mask) & VLAN_PRIO_MASK) == VLAN_PRIO_MASK) +#define is_vlan_pcp_zero(vlan_tci) \ + ((ntohs(vlan_tci) & VLAN_PRIO_MASK) == 0x0000) +#define is_vid_exactmatch(vlan_tci_mask) \ + ((ntohs(vlan_tci_mask) & VLAN_VID_MASK) == VLAN_VID_MASK) + /* Return the dst fid of the func for flow forwarding * For PFs: src_fid is the fid of the PF * For VF-reps: src_fid the fid of the VF @@ -389,6 +398,21 @@ static bool is_exactmatch(void *mask, int len) return true; } +static bool is_vlan_tci_allowed(__be16 vlan_tci_mask, + __be16 vlan_tci) +{ + /* VLAN priority must be either exactly zero or fully wildcarded and + * VLAN id must be exact match. + */ + if (is_vid_exactmatch(vlan_tci_mask) && + ((is_vlan_pcp_exactmatch(vlan_tci_mask) && + is_vlan_pcp_zero(vlan_tci)) || + is_vlan_pcp_wildcarded(vlan_tci_mask))) + return true; + + return false; +} + static bool bits_set(void *key, int len) { const u8 *p = key; @@ -803,9 +827,9 @@ static bool bnxt_tc_can_offload(struct bnxt *bp, struct bnxt_tc_flow *flow) /* Currently VLAN fields cannot be partial wildcard */ if (bits_set(&flow->l2_key.inner_vlan_tci, sizeof(flow->l2_key.inner_vlan_tci)) && - !is_exactmatch(&flow->l2_mask.inner_vlan_tci, - sizeof(flow->l2_mask.inner_vlan_tci))) { - netdev_info(bp->dev, "Wildcard match unsupported for VLAN TCI\n"); + !is_vlan_tci_allowed(flow->l2_mask.inner_vlan_tci, + flow->l2_key.inner_vlan_tci)) { + netdev_info(bp->dev, "Unsupported VLAN TCI\n"); return false; } if (bits_set(&flow->l2_key.inner_vlan_tpid, -- cgit v1.2.3 From 07f4fde53d12eb8d921b465bb298e964e0bdc38c Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Mon, 9 Jul 2018 02:24:48 -0400 Subject: bnxt_en: Fix inconsistent BNXT_FLAG_AGG_RINGS logic. If there aren't enough RX rings available, the driver will attempt to use a single RX ring without the aggregation ring. If that also fails, the BNXT_FLAG_AGG_RINGS flag is cleared but the other ring parameters are not set consistently to reflect that. If more RX rings become available at the next open, the RX rings will be in an inconsistent state and may crash when freeing the RX rings. Fix it by restoring the BNXT_FLAG_AGG_RINGS if not enough RX rings are available to run without aggregation rings. Fixes: bdbd1eb59c56 ("bnxt_en: Handle no aggregation ring gracefully.") Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 176fc9f4d7de..5d95d788737f 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -8520,8 +8520,11 @@ static int bnxt_get_dflt_rings(struct bnxt *bp, int *max_rx, int *max_tx, /* Not enough rings, try disabling agg rings. */ bp->flags &= ~BNXT_FLAG_AGG_RINGS; rc = bnxt_get_max_rings(bp, max_rx, max_tx, shared); - if (rc) + if (rc) { + /* set BNXT_FLAG_AGG_RINGS back for consistency */ + bp->flags |= BNXT_FLAG_AGG_RINGS; return rc; + } bp->flags |= BNXT_FLAG_NO_AGG_RINGS; bp->dev->hw_features &= ~(NETIF_F_LRO | NETIF_F_GRO_HW); bp->dev->features &= ~(NETIF_F_LRO | NETIF_F_GRO_HW); -- cgit v1.2.3 From 78f058a4aa0f2280dc4d45d2c4a95728398ef857 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Mon, 9 Jul 2018 02:24:49 -0400 Subject: bnxt_en: Always set output parameters in bnxt_get_max_rings(). The current code returns -ENOMEM and does not bother to set the output parameters to 0 when no rings are available. Some callers, such as bnxt_get_channels() will display garbage ring numbers when that happens. Fix it by always setting the output parameters. Fixes: 6e6c5a57fbe1 ("bnxt_en: Modify bnxt_get_max_rings() to support shared or non shared rings.") Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 5d95d788737f..5a47607aba53 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -8502,11 +8502,11 @@ int bnxt_get_max_rings(struct bnxt *bp, int *max_rx, int *max_tx, bool shared) int rx, tx, cp; _bnxt_get_max_rings(bp, &rx, &tx, &cp); + *max_rx = rx; + *max_tx = tx; if (!rx || !tx || !cp) return -ENOMEM; - *max_rx = rx; - *max_tx = tx; return bnxt_trim_rings(bp, max_rx, max_tx, cp, shared); } -- cgit v1.2.3 From 30e338487a476aff2f12f440d1190a71c245b99c Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Mon, 9 Jul 2018 02:24:50 -0400 Subject: bnxt_en: Support clearing of the IFF_BROADCAST flag. Currently, the driver assumes IFF_BROADCAST is always set and always sets the broadcast filter. Modify the code to set or clear the broadcast filter according to the IFF_BROADCAST flag. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 5a47607aba53..fac1285d2535 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -5712,7 +5712,9 @@ static int bnxt_init_chip(struct bnxt *bp, bool irq_re_init) } vnic->uc_filter_count = 1; - vnic->rx_mask = CFA_L2_SET_RX_MASK_REQ_MASK_BCAST; + vnic->rx_mask = 0; + if (bp->dev->flags & IFF_BROADCAST) + vnic->rx_mask |= CFA_L2_SET_RX_MASK_REQ_MASK_BCAST; if ((bp->dev->flags & IFF_PROMISC) && bnxt_promisc_ok(bp)) vnic->rx_mask |= CFA_L2_SET_RX_MASK_REQ_MASK_PROMISCUOUS; @@ -7214,13 +7216,16 @@ static void bnxt_set_rx_mode(struct net_device *dev) mask &= ~(CFA_L2_SET_RX_MASK_REQ_MASK_PROMISCUOUS | CFA_L2_SET_RX_MASK_REQ_MASK_MCAST | - CFA_L2_SET_RX_MASK_REQ_MASK_ALL_MCAST); + CFA_L2_SET_RX_MASK_REQ_MASK_ALL_MCAST | + CFA_L2_SET_RX_MASK_REQ_MASK_BCAST); if ((dev->flags & IFF_PROMISC) && bnxt_promisc_ok(bp)) mask |= CFA_L2_SET_RX_MASK_REQ_MASK_PROMISCUOUS; uc_update = bnxt_uc_list_updated(bp); + if (dev->flags & IFF_BROADCAST) + mask |= CFA_L2_SET_RX_MASK_REQ_MASK_BCAST; if (dev->flags & IFF_ALLMULTI) { mask |= CFA_L2_SET_RX_MASK_REQ_MASK_ALL_MCAST; vnic->mc_list_count = 0; -- cgit v1.2.3 From 30f529473ec962102e8bcd33a6a04f1e1b490ae2 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Mon, 9 Jul 2018 02:24:51 -0400 Subject: bnxt_en: Do not modify max IRQ count after RDMA driver requests/frees IRQs. Calling bnxt_set_max_func_irqs() to modify the max IRQ count requested or freed by the RDMA driver is flawed. The max IRQ count is checked when re-initializing the IRQ vectors and this can happen multiple times during ifup or ethtool -L. If the max IRQ is reduced and the RDMA driver is operational, we may not initailize IRQs correctly. This problem shows up on VFs with very small number of MSIX. There is no other logic that relies on the IRQ count excluding the ones used by RDMA. So we fix it by just removing the call to subtract or add the IRQs used by RDMA. Fixes: a588e4580a7e ("bnxt_en: Add interface to support RDMA driver.") Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 2 +- drivers/net/ethernet/broadcom/bnxt/bnxt.h | 1 - drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c | 2 -- 3 files changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index fac1285d2535..11b21ad0a672 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -5919,7 +5919,7 @@ unsigned int bnxt_get_max_func_irqs(struct bnxt *bp) return min_t(unsigned int, hw_resc->max_irqs, hw_resc->max_cp_rings); } -void bnxt_set_max_func_irqs(struct bnxt *bp, unsigned int max_irqs) +static void bnxt_set_max_func_irqs(struct bnxt *bp, unsigned int max_irqs) { bp->hw_resc.max_irqs = max_irqs; } diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h index 9b14eb610b9f..91575ef97c8c 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h @@ -1470,7 +1470,6 @@ void bnxt_set_max_func_stat_ctxs(struct bnxt *bp, unsigned int max); unsigned int bnxt_get_max_func_cp_rings(struct bnxt *bp); void bnxt_set_max_func_cp_rings(struct bnxt *bp, unsigned int max); unsigned int bnxt_get_max_func_irqs(struct bnxt *bp); -void bnxt_set_max_func_irqs(struct bnxt *bp, unsigned int max); int bnxt_get_avail_msix(struct bnxt *bp, int num); int bnxt_reserve_rings(struct bnxt *bp); void bnxt_tx_disable(struct bnxt *bp); diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c index 347e4f946eb2..840f6e505f73 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c @@ -169,7 +169,6 @@ static int bnxt_req_msix_vecs(struct bnxt_en_dev *edev, int ulp_id, edev->ulp_tbl[ulp_id].msix_requested = avail_msix; } bnxt_fill_msix_vecs(bp, ent); - bnxt_set_max_func_irqs(bp, bnxt_get_max_func_irqs(bp) - avail_msix); bnxt_set_max_func_cp_rings(bp, max_cp_rings - avail_msix); edev->flags |= BNXT_EN_FLAG_MSIX_REQUESTED; return avail_msix; @@ -192,7 +191,6 @@ static int bnxt_free_msix_vecs(struct bnxt_en_dev *edev, int ulp_id) msix_requested = edev->ulp_tbl[ulp_id].msix_requested; bnxt_set_max_func_cp_rings(bp, max_cp_rings + msix_requested); edev->ulp_tbl[ulp_id].msix_requested = 0; - bnxt_set_max_func_irqs(bp, bnxt_get_max_func_irqs(bp) + msix_requested); edev->flags &= ~BNXT_EN_FLAG_MSIX_REQUESTED; if (netif_running(dev)) { bnxt_close_nic(bp, true, false); -- cgit v1.2.3 From c58387ab1614f6d7fb9e244f214b61e7631421fc Mon Sep 17 00:00:00 2001 From: Vikas Gupta Date: Mon, 9 Jul 2018 02:24:52 -0400 Subject: bnxt_en: Fix for system hang if request_irq fails Fix bug in the error code path when bnxt_request_irq() returns failure. bnxt_disable_napi() should not be called in this error path because NAPI has not been enabled yet. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Vikas Gupta Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 11b21ad0a672..4394c1162be4 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -6890,7 +6890,7 @@ static int __bnxt_open_nic(struct bnxt *bp, bool irq_re_init, bool link_re_init) rc = bnxt_request_irq(bp); if (rc) { netdev_err(bp->dev, "bnxt_request_irq err: %x\n", rc); - goto open_err; + goto open_err_irq; } } @@ -6930,6 +6930,8 @@ static int __bnxt_open_nic(struct bnxt *bp, bool irq_re_init, bool link_re_init) open_err: bnxt_debug_dev_exit(bp); bnxt_disable_napi(bp); + +open_err_irq: bnxt_del_napi(bp); open_err_free_mem: -- cgit v1.2.3 From 0026129c8629265bfe5079c1e017fa8543796d9f Mon Sep 17 00:00:00 2001 From: Taehee Yoo Date: Sun, 8 Jul 2018 11:55:51 +0900 Subject: rhashtable: add restart routine in rhashtable_free_and_destroy() rhashtable_free_and_destroy() cancels re-hash deferred work then walks and destroys elements. at this moment, some elements can be still in future_tbl. that elements are not destroyed. test case: nft_rhash_destroy() calls rhashtable_free_and_destroy() to destroy all elements of sets before destroying sets and chains. But rhashtable_free_and_destroy() doesn't destroy elements of future_tbl. so that splat occurred. test script: %cat test.nft table ip aa { map map1 { type ipv4_addr : verdict; elements = { 0 : jump a0, 1 : jump a0, 2 : jump a0, 3 : jump a0, 4 : jump a0, 5 : jump a0, 6 : jump a0, 7 : jump a0, 8 : jump a0, 9 : jump a0, } } chain a0 { } } flush ruleset table ip aa { map map1 { type ipv4_addr : verdict; elements = { 0 : jump a0, 1 : jump a0, 2 : jump a0, 3 : jump a0, 4 : jump a0, 5 : jump a0, 6 : jump a0, 7 : jump a0, 8 : jump a0, 9 : jump a0, } } chain a0 { } } flush ruleset %while :; do nft -f test.nft; done Splat looks like: [ 200.795603] kernel BUG at net/netfilter/nf_tables_api.c:1363! [ 200.806944] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 200.812253] CPU: 1 PID: 1582 Comm: nft Not tainted 4.17.0+ #24 [ 200.820297] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 07/08/2015 [ 200.830309] RIP: 0010:nf_tables_chain_destroy.isra.34+0x62/0x240 [nf_tables] [ 200.838317] Code: 43 50 85 c0 74 26 48 8b 45 00 48 8b 4d 08 ba 54 05 00 00 48 c7 c6 60 6d 29 c0 48 c7 c7 c0 65 29 c0 4c 8b 40 08 e8 58 e5 fd f8 <0f> 0b 48 89 da 48 b8 00 00 00 00 00 fc ff [ 200.860366] RSP: 0000:ffff880118dbf4d0 EFLAGS: 00010282 [ 200.866354] RAX: 0000000000000061 RBX: ffff88010cdeaf08 RCX: 0000000000000000 [ 200.874355] RDX: 0000000000000061 RSI: 0000000000000008 RDI: ffffed00231b7e90 [ 200.882361] RBP: ffff880118dbf4e8 R08: ffffed002373bcfb R09: ffffed002373bcfa [ 200.890354] R10: 0000000000000000 R11: ffffed002373bcfb R12: dead000000000200 [ 200.898356] R13: dead000000000100 R14: ffffffffbb62af38 R15: dffffc0000000000 [ 200.906354] FS: 00007fefc31fd700(0000) GS:ffff88011b800000(0000) knlGS:0000000000000000 [ 200.915533] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 200.922355] CR2: 0000557f1c8e9128 CR3: 0000000106880000 CR4: 00000000001006e0 [ 200.930353] Call Trace: [ 200.932351] ? nf_tables_commit+0x26f6/0x2c60 [nf_tables] [ 200.939525] ? nf_tables_setelem_notify.constprop.49+0x1a0/0x1a0 [nf_tables] [ 200.947525] ? nf_tables_delchain+0x6e0/0x6e0 [nf_tables] [ 200.952383] ? nft_add_set_elem+0x1700/0x1700 [nf_tables] [ 200.959532] ? nla_parse+0xab/0x230 [ 200.963529] ? nfnetlink_rcv_batch+0xd06/0x10d0 [nfnetlink] [ 200.968384] ? nfnetlink_net_init+0x130/0x130 [nfnetlink] [ 200.975525] ? debug_show_all_locks+0x290/0x290 [ 200.980363] ? debug_show_all_locks+0x290/0x290 [ 200.986356] ? sched_clock_cpu+0x132/0x170 [ 200.990352] ? find_held_lock+0x39/0x1b0 [ 200.994355] ? sched_clock_local+0x10d/0x130 [ 200.999531] ? memset+0x1f/0x40 V2: - free all tables requested by Herbert Xu Signed-off-by: Taehee Yoo Acked-by: Herbert Xu Signed-off-by: David S. Miller --- lib/rhashtable.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/lib/rhashtable.c b/lib/rhashtable.c index 3109b2e1d552..0183d07a9b4d 100644 --- a/lib/rhashtable.c +++ b/lib/rhashtable.c @@ -1143,13 +1143,14 @@ void rhashtable_free_and_destroy(struct rhashtable *ht, void (*free_fn)(void *ptr, void *arg), void *arg) { - struct bucket_table *tbl; + struct bucket_table *tbl, *next_tbl; unsigned int i; cancel_work_sync(&ht->run_work); mutex_lock(&ht->mutex); tbl = rht_dereference(ht->tbl, ht); +restart: if (free_fn) { for (i = 0; i < tbl->size; i++) { struct rhash_head *pos, *next; @@ -1166,7 +1167,12 @@ void rhashtable_free_and_destroy(struct rhashtable *ht, } } + next_tbl = rht_dereference(tbl->future_tbl, ht); bucket_table_free(tbl); + if (next_tbl) { + tbl = next_tbl; + goto restart; + } mutex_unlock(&ht->mutex); } EXPORT_SYMBOL_GPL(rhashtable_free_and_destroy); -- cgit v1.2.3 From 8fb8876b2d1432b352c96add3adefa28d2754672 Mon Sep 17 00:00:00 2001 From: Souptick Joarder Date: Mon, 21 May 2018 23:47:04 +0530 Subject: char: agp: Change return type to vm_fault_t Use new return type vm_fault_t for fault handler. For now, this is just documenting that the function returns a VM_FAULT value rather than an errno. Once all instances are converted, vm_fault_t will become a distinct type. Ref-> commit 1c8f422059ae ("mm: change return type to vm_fault_t") was added in 4.17-rc1 to introduce the new typedef vm_fault_t. Currently we are making change to all drivers to return vm_fault_t for page fault handlers. As part of that char/agp driver is also getting changed to return vm_fault_t type from fault handler. Signed-off-by: Souptick Joarder Reviewed-by: Matthew Wilcox Signed-off-by: Dave Airlie --- drivers/char/agp/alpha-agp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/agp/alpha-agp.c b/drivers/char/agp/alpha-agp.c index 53fe633df1e8..c9bf2c219841 100644 --- a/drivers/char/agp/alpha-agp.c +++ b/drivers/char/agp/alpha-agp.c @@ -11,7 +11,7 @@ #include "agp.h" -static int alpha_core_agp_vm_fault(struct vm_fault *vmf) +static vm_fault_t alpha_core_agp_vm_fault(struct vm_fault *vmf) { alpha_agp_info *agp = agp_bridge->dev_private_data; dma_addr_t dma_addr; -- cgit v1.2.3 From 572d8fda26fecbb6bbb63e917b5610c7157cde96 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Wed, 4 Jul 2018 17:20:41 -0500 Subject: char: amd64-agp: Use 64-bit arithmetic instead of 32-bit Cast *tmp* and *nb_base* to u64 in order to give the compiler complete information about the proper arithmetic to use. Notice that such variables are used in contexts that expect expressions of type u64 (64 bits, unsigned) and the following expressions are currently being evaluated using 32-bit arithmetic: tmp << 25 nb_base << 25 Addresses-Coverity-ID: 200586 ("Unintentional integer overflow") Addresses-Coverity-ID: 200587 ("Unintentional integer overflow") Signed-off-by: Gustavo A. R. Silva Signed-off-by: Dave Airlie --- drivers/char/agp/amd64-agp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c index e50c29c97ca7..c69e39fdd02b 100644 --- a/drivers/char/agp/amd64-agp.c +++ b/drivers/char/agp/amd64-agp.c @@ -156,7 +156,7 @@ static u64 amd64_configure(struct pci_dev *hammer, u64 gatt_table) /* Address to map to */ pci_read_config_dword(hammer, AMD64_GARTAPERTUREBASE, &tmp); - aperturebase = tmp << 25; + aperturebase = (u64)tmp << 25; aper_base = (aperturebase & PCI_BASE_ADDRESS_MEM_MASK); enable_gart_translation(hammer, gatt_table); @@ -277,7 +277,7 @@ static int fix_northbridge(struct pci_dev *nb, struct pci_dev *agp, u16 cap) pci_read_config_dword(nb, AMD64_GARTAPERTURECTL, &nb_order); nb_order = (nb_order >> 1) & 7; pci_read_config_dword(nb, AMD64_GARTAPERTUREBASE, &nb_base); - nb_aper = nb_base << 25; + nb_aper = (u64)nb_base << 25; /* Northbridge seems to contain crap. Try the AGP bridge. */ -- cgit v1.2.3 From 362eca70b53389bddf3143fe20f53dcce2cfdf61 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Tue, 10 Jul 2018 01:07:43 -0400 Subject: ext4: fix inline data updates with checksums enabled The inline data code was updating the raw inode directly; this is problematic since if metadata checksums are enabled, ext4_mark_inode_dirty() must be called to update the inode's checksum. In addition, the jbd2 layer requires that get_write_access() be called before the metadata buffer is modified. Fix both of these problems. https://bugzilla.kernel.org/show_bug.cgi?id=200443 Signed-off-by: Theodore Ts'o Cc: stable@vger.kernel.org --- fs/ext4/inline.c | 19 +++++++++++-------- fs/ext4/inode.c | 16 +++++++--------- 2 files changed, 18 insertions(+), 17 deletions(-) diff --git a/fs/ext4/inline.c b/fs/ext4/inline.c index e55a8bc870bd..3543fe80a3c4 100644 --- a/fs/ext4/inline.c +++ b/fs/ext4/inline.c @@ -682,6 +682,10 @@ int ext4_try_to_write_inline_data(struct address_space *mapping, goto convert; } + ret = ext4_journal_get_write_access(handle, iloc.bh); + if (ret) + goto out; + flags |= AOP_FLAG_NOFS; page = grab_cache_page_write_begin(mapping, 0, flags); @@ -710,7 +714,7 @@ int ext4_try_to_write_inline_data(struct address_space *mapping, out_up_read: up_read(&EXT4_I(inode)->xattr_sem); out: - if (handle) + if (handle && (ret != 1)) ext4_journal_stop(handle); brelse(iloc.bh); return ret; @@ -752,6 +756,7 @@ int ext4_write_inline_data_end(struct inode *inode, loff_t pos, unsigned len, ext4_write_unlock_xattr(inode, &no_expand); brelse(iloc.bh); + mark_inode_dirty(inode); out: return copied; } @@ -898,7 +903,6 @@ retry_journal: goto out; } - page = grab_cache_page_write_begin(mapping, 0, flags); if (!page) { ret = -ENOMEM; @@ -916,6 +920,9 @@ retry_journal: if (ret < 0) goto out_release_page; } + ret = ext4_journal_get_write_access(handle, iloc.bh); + if (ret) + goto out_release_page; up_read(&EXT4_I(inode)->xattr_sem); *pagep = page; @@ -936,7 +943,6 @@ int ext4_da_write_inline_data_end(struct inode *inode, loff_t pos, unsigned len, unsigned copied, struct page *page) { - int i_size_changed = 0; int ret; ret = ext4_write_inline_data_end(inode, pos, len, copied, page); @@ -954,10 +960,8 @@ int ext4_da_write_inline_data_end(struct inode *inode, loff_t pos, * But it's important to update i_size while still holding page lock: * page writeout could otherwise come in and zero beyond i_size. */ - if (pos+copied > inode->i_size) { + if (pos+copied > inode->i_size) i_size_write(inode, pos+copied); - i_size_changed = 1; - } unlock_page(page); put_page(page); @@ -967,8 +971,7 @@ int ext4_da_write_inline_data_end(struct inode *inode, loff_t pos, * ordering of page lock and transaction start for journaling * filesystems. */ - if (i_size_changed) - mark_inode_dirty(inode); + mark_inode_dirty(inode); return copied; } diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 7d6c10017bdf..4efe77286ecd 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -1389,9 +1389,10 @@ static int ext4_write_end(struct file *file, loff_t old_size = inode->i_size; int ret = 0, ret2; int i_size_changed = 0; + int inline_data = ext4_has_inline_data(inode); trace_ext4_write_end(inode, pos, len, copied); - if (ext4_has_inline_data(inode)) { + if (inline_data) { ret = ext4_write_inline_data_end(inode, pos, len, copied, page); if (ret < 0) { @@ -1419,7 +1420,7 @@ static int ext4_write_end(struct file *file, * ordering of page lock and transaction start for journaling * filesystems. */ - if (i_size_changed) + if (i_size_changed || inline_data) ext4_mark_inode_dirty(handle, inode); if (pos + len > inode->i_size && ext4_can_truncate(inode)) @@ -1493,6 +1494,7 @@ static int ext4_journalled_write_end(struct file *file, int partial = 0; unsigned from, to; int size_changed = 0; + int inline_data = ext4_has_inline_data(inode); trace_ext4_journalled_write_end(inode, pos, len, copied); from = pos & (PAGE_SIZE - 1); @@ -1500,7 +1502,7 @@ static int ext4_journalled_write_end(struct file *file, BUG_ON(!ext4_handle_valid(handle)); - if (ext4_has_inline_data(inode)) { + if (inline_data) { ret = ext4_write_inline_data_end(inode, pos, len, copied, page); if (ret < 0) { @@ -1531,7 +1533,7 @@ static int ext4_journalled_write_end(struct file *file, if (old_size < pos) pagecache_isize_extended(inode, old_size, pos); - if (size_changed) { + if (size_changed || inline_data) { ret2 = ext4_mark_inode_dirty(handle, inode); if (!ret) ret = ret2; @@ -2028,11 +2030,7 @@ static int __ext4_journalled_writepage(struct page *page, } if (inline_data) { - BUFFER_TRACE(inode_bh, "get write access"); - ret = ext4_journal_get_write_access(handle, inode_bh); - - err = ext4_handle_dirty_metadata(handle, inode, inode_bh); - + ret = ext4_mark_inode_dirty(handle, inode); } else { ret = ext4_walk_page_buffers(handle, page_bufs, 0, len, NULL, do_journal_get_write_access); -- cgit v1.2.3 From b9626f45abccd044f8048269c67720f0719f2d4e Mon Sep 17 00:00:00 2001 From: Taeung Song Date: Tue, 10 Jul 2018 02:51:21 +0900 Subject: samples/bpf: Fix tc and ip paths in xdp2skb_meta.sh The below path error can occur: # ./xdp2skb_meta.sh --dev eth0 --list ./xdp2skb_meta.sh: line 61: /usr/sbin/tc: No such file or directory So just use command names instead of absolute paths of tc and ip. In addition, it allow callers to redefine $TC and $IP paths Fixes: 36e04a2d78d9 ("samples/bpf: xdp2skb_meta shows transferring info from XDP to SKB") Reviewed-by: Jesper Dangaard Brouer Signed-off-by: Taeung Song Acked-by: Jesper Dangaard Brouer Signed-off-by: Daniel Borkmann --- samples/bpf/xdp2skb_meta.sh | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/samples/bpf/xdp2skb_meta.sh b/samples/bpf/xdp2skb_meta.sh index b9c9549c4c27..4bde9d066c46 100755 --- a/samples/bpf/xdp2skb_meta.sh +++ b/samples/bpf/xdp2skb_meta.sh @@ -16,8 +16,8 @@ BPF_FILE=xdp2skb_meta_kern.o DIR=$(dirname $0) -export TC=/usr/sbin/tc -export IP=/usr/sbin/ip +[ -z "$TC" ] && TC=tc +[ -z "$IP" ] && IP=ip function usage() { echo "" @@ -53,7 +53,7 @@ function _call_cmd() { local allow_fail="$2" shift 2 if [[ -n "$VERBOSE" ]]; then - echo "$(basename $cmd) $@" + echo "$cmd $@" fi if [[ -n "$DRYRUN" ]]; then return -- cgit v1.2.3 From 59ee4129a279070d8e2f9dc1660330f6593c7808 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Tue, 10 Jul 2018 00:43:22 +0200 Subject: bpf: fix ldx in ld_abs rewrite for large offsets Mark reported that syzkaller triggered a KASAN detected slab-out-of-bounds bug in ___bpf_prog_run() with a BPF_LD | BPF_ABS word load at offset 0x8001. After further investigation it became clear that the issue was the BPF_LDX_MEM() which takes offset as an argument whereas it cannot encode larger than S16_MAX offsets into it. For this synthetical case we need to move the full address into tmp register instead and do the LDX without immediate value. Fixes: e0cea7ce988c ("bpf: implement ld_abs/ld_ind in native bpf") Reported-by: syzbot Reported-by: Mark Rutland Signed-off-by: Daniel Borkmann Signed-off-by: Alexei Starovoitov --- net/core/filter.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/net/core/filter.c b/net/core/filter.c index 5fa66a33927f..a13f5b1f1636 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -459,11 +459,21 @@ static bool convert_bpf_ld_abs(struct sock_filter *fp, struct bpf_insn **insnp) (!unaligned_ok && offset >= 0 && offset + ip_align >= 0 && offset + ip_align % size == 0))) { + bool ldx_off_ok = offset <= S16_MAX; + *insn++ = BPF_MOV64_REG(BPF_REG_TMP, BPF_REG_H); *insn++ = BPF_ALU64_IMM(BPF_SUB, BPF_REG_TMP, offset); - *insn++ = BPF_JMP_IMM(BPF_JSLT, BPF_REG_TMP, size, 2 + endian); - *insn++ = BPF_LDX_MEM(BPF_SIZE(fp->code), BPF_REG_A, BPF_REG_D, - offset); + *insn++ = BPF_JMP_IMM(BPF_JSLT, BPF_REG_TMP, + size, 2 + endian + (!ldx_off_ok * 2)); + if (ldx_off_ok) { + *insn++ = BPF_LDX_MEM(BPF_SIZE(fp->code), BPF_REG_A, + BPF_REG_D, offset); + } else { + *insn++ = BPF_MOV64_REG(BPF_REG_TMP, BPF_REG_D); + *insn++ = BPF_ALU64_IMM(BPF_ADD, BPF_REG_TMP, offset); + *insn++ = BPF_LDX_MEM(BPF_SIZE(fp->code), BPF_REG_A, + BPF_REG_TMP, 0); + } if (endian) *insn++ = BPF_ENDIAN(BPF_FROM_BE, BPF_REG_A, size * 8); *insn++ = BPF_JMP_A(8); -- cgit v1.2.3 From 722e5f2b1eec7de61117b7c0a7914761e3da2eda Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 10 Jul 2018 14:51:33 +0200 Subject: driver core: Partially revert "driver core: correct device's shutdown order" Commit 52cdbdd49853 (driver core: correct device's shutdown order) introduced a regression by breaking device shutdown on some systems. Namely, the devices_kset_move_last() call in really_probe() added by that commit is a mistake as it may cause parents to follow children in the devices_kset list which then causes shutdown to fail. For example, if a device has children before really_probe() is called for it (which is not uncommon), that call will cause it to be reordered after the children in the devices_kset list and the ordering of that list will not reflect the correct device shutdown order any more. Also it causes the devices_kset list to be constantly reordered until all drivers have been probed which is totally pointless overhead in the majority of cases and it only covered an issue with system shutdown, while system-wide suspend/resume potentially had the same issue on the affected platforms (which was not covered). Moreover, the shutdown issue originally addressed by the change in really_probe() made by commit 52cdbdd49853 is not present in 4.18-rc any more, since dra7 started to use the sdhci-omap driver which doesn't disable any regulators during shutdown, so the really_probe() part of commit 52cdbdd49853 can be safely reverted. [The original issue was related to the omap_hsmmc driver used by dra7 previously.] For the above reasons, revert the really_probe() modifications made by commit 52cdbdd49853. The other code changes made by commit 52cdbdd49853 are useful and they need not be reverted. Fixes: 52cdbdd49853 (driver core: correct device's shutdown order) Link: https://lore.kernel.org/lkml/CAFgQCTt7VfqM=UyCnvNFxrSw8Z6cUtAi3HUwR4_xPAc03SgHjQ@mail.gmail.com/ Reported-by: Pingfan Liu Tested-by: Pingfan Liu Reviewed-by: Kishon Vijay Abraham I Signed-off-by: Rafael J. Wysocki Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/base/dd.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/drivers/base/dd.c b/drivers/base/dd.c index 1435d7281c66..6ebcd65d64b6 100644 --- a/drivers/base/dd.c +++ b/drivers/base/dd.c @@ -434,14 +434,6 @@ re_probe: goto probe_failed; } - /* - * Ensure devices are listed in devices_kset in correct order - * It's important to move Dev to the end of devices_kset before - * calling .probe, because it could be recursive and parent Dev - * should always go first - */ - devices_kset_move_last(dev); - if (dev->bus->probe) { ret = dev->bus->probe(dev); if (ret) -- cgit v1.2.3 From 81583afe790c5bd86300537783b23f3b12794f03 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 7 Jul 2018 12:22:10 +0200 Subject: ASoC: Intel: bytcr_rt5640: Add quirk for the Lenovo Miix2 8 tablet Add a quirk for the Lenovo Miix2 8 tablet, this tablet uses a digital mic on DMIC1 and has a mono-speaker. The jack-detect uses the default settings.. Reported-and-tested-by: russianneuromancer@ya.ru Signed-off-by: Hans de Goede Acked-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- sound/soc/intel/boards/bytcr_rt5640.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index 7456566c5648..657910a08261 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -552,6 +552,19 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { BYT_RT5640_SSP0_AIF1 | BYT_RT5640_MCLK_EN), }, + { /* Lenovo Miix 2 8 */ + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "20326"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "Hiking"), + }, + .driver_data = (void *)(BYT_RT5640_DMIC1_MAP | + BYT_RT5640_JD_SRC_JD2_IN4N | + BYT_RT5640_OVCD_TH_2000UA | + BYT_RT5640_OVCD_SF_0P75 | + BYT_RT5640_MONO_SPEAKER | + BYT_RT5640_MCLK_EN), + }, { /* MSI S100 tablet */ .matches = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Micro-Star International Co., Ltd."), -- cgit v1.2.3 From fbea16dbc0a31484811c5f335ae344b2bbc66f40 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 1 Jul 2018 20:36:29 +0200 Subject: ASoC: Intel: bytcr_rt5651: Remove is_valleyview helper Remove is_valleyview helper, this is not necessary, we can simply call x86_match_cpu() directly instead. Signed-off-by: Hans de Goede Acked-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- sound/soc/intel/boards/bytcr_rt5651.c | 18 ++++++------------ 1 file changed, 6 insertions(+), 12 deletions(-) diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c index ba2753e0e12a..80f47a45cb10 100644 --- a/sound/soc/intel/boards/bytcr_rt5651.c +++ b/sound/soc/intel/boards/bytcr_rt5651.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include #include @@ -680,17 +681,10 @@ static char byt_rt5651_codec_aif_name[12]; /* = "rt5651-aif[1|2]" */ static char byt_rt5651_cpu_dai_name[10]; /* = "ssp[0|2]-port" */ static char byt_rt5651_long_name[40]; /* = "bytcr-rt5651-*-mic[-swapped-hp]" */ -static bool is_valleyview(void) -{ - static const struct x86_cpu_id cpu_ids[] = { - { X86_VENDOR_INTEL, 6, 55 }, /* Valleyview, Bay Trail */ - {} - }; - - if (!x86_match_cpu(cpu_ids)) - return false; - return true; -} +static const struct x86_cpu_id baytrail_cpu_ids[] = { + { X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_SILVERMONT1 }, /* Valleyview */ + {} +}; struct acpi_chan_package { /* ACPICA seems to require 64 bit integers */ u64 aif_value; /* 1: AIF1, 2: AIF2 */ @@ -741,7 +735,7 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev) * swap SSP0 if bytcr is detected * (will be overridden if DMI quirk is detected) */ - if (is_valleyview()) { + if (x86_match_cpu(baytrail_cpu_ids)) { struct sst_platform_info *p_info = mach->pdata; const struct sst_res_info *res_info = p_info->res_info; -- cgit v1.2.3 From 2c375204bfad2f481feb006a82cdb67cc570b670 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 1 Jul 2018 20:36:30 +0200 Subject: ASoC: Intel: bytcr_rt5651: Move getting of codec_dev into probe() Move the getting of the codec_dev, to add device-props to it, out of byt_rt5651_add_codec_device_props() and into its caller, snd_byt_rt5651_mc_probe(). This is a preparation patch for adding support for an external amplifier enable GPIO, which requires further accesses to the codec_dev. Signed-off-by: Hans de Goede Acked-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- sound/soc/intel/boards/bytcr_rt5651.c | 23 +++++++++++------------ 1 file changed, 11 insertions(+), 12 deletions(-) diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c index 80f47a45cb10..d920725ce603 100644 --- a/sound/soc/intel/boards/bytcr_rt5651.c +++ b/sound/soc/intel/boards/bytcr_rt5651.c @@ -403,15 +403,10 @@ static const struct dmi_system_id byt_rt5651_quirk_table[] = { * Note this MUST be called before snd_soc_register_card(), so that the props * are in place before the codec component driver's probe function parses them. */ -static int byt_rt5651_add_codec_device_props(const char *i2c_dev_name) +static int byt_rt5651_add_codec_device_props(struct device *i2c_dev) { struct property_entry props[MAX_NO_PROPS] = {}; - struct device *i2c_dev; - int ret, cnt = 0; - - i2c_dev = bus_find_device_by_name(&i2c_bus_type, NULL, i2c_dev_name); - if (!i2c_dev) - return -EPROBE_DEFER; + int cnt = 0; props[cnt++] = PROPERTY_ENTRY_U32("realtek,jack-detect-source", BYT_RT5651_JDSRC(byt_rt5651_quirk)); @@ -425,10 +420,7 @@ static int byt_rt5651_add_codec_device_props(const char *i2c_dev_name) if (byt_rt5651_quirk & BYT_RT5651_DMIC_EN) props[cnt++] = PROPERTY_ENTRY_BOOL("realtek,dmic-en"); - ret = device_add_properties(i2c_dev, props); - put_device(i2c_dev); - - return ret; + return device_add_properties(i2c_dev, props); } static int byt_rt5651_init(struct snd_soc_pcm_runtime *runtime) @@ -696,6 +688,7 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev) const char * const mic_name[] = { "dmic", "in1", "in12" }; struct byt_rt5651_private *priv; struct snd_soc_acpi_mach *mach; + struct device *codec_dev; const char *i2c_name = NULL; const char *hp_swapped; bool is_bytcr = false; @@ -731,6 +724,11 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev) "%s%s", "i2c-", i2c_name); byt_rt5651_dais[dai_index].codec_name = byt_rt5651_codec_name; + codec_dev = bus_find_device_by_name(&i2c_bus_type, NULL, + byt_rt5651_codec_name); + if (!codec_dev) + return -EPROBE_DEFER; + /* * swap SSP0 if bytcr is detected * (will be overridden if DMI quirk is detected) @@ -794,7 +792,8 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev) dmi_check_system(byt_rt5651_quirk_table); /* Must be called before register_card, also see declaration comment. */ - ret_val = byt_rt5651_add_codec_device_props(byt_rt5651_codec_name); + ret_val = byt_rt5651_add_codec_device_props(codec_dev); + put_device(codec_dev); if (ret_val) return ret_val; -- cgit v1.2.3 From 5f6fb23d2e114506ddb8437a3e65f4a20d081013 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 1 Jul 2018 20:36:31 +0200 Subject: ASoC: Intel: bytcr_rt5651: Add support for externar amplifier enable GPIO The rt5651 does not have a built-in speaker amplifier, so it is often used together with an external amplifier. On Cherry Trail boards this external amplifier's enable pin is driven through a GPIO, which is given as the first GPIO in the ACPI resources of the codec fwnode. This commit adds support to the bytcr_rt5651 for this GPIO, fixing the speaker not working on CHT devices with a rt5651 codec. Cc: Carlo Caione Signed-off-by: Hans de Goede Acked-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- sound/soc/intel/boards/bytcr_rt5651.c | 65 +++++++++++++++++++++++++++++++++-- 1 file changed, 62 insertions(+), 3 deletions(-) diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c index d920725ce603..5301205496be 100644 --- a/sound/soc/intel/boards/bytcr_rt5651.c +++ b/sound/soc/intel/boards/bytcr_rt5651.c @@ -26,6 +26,8 @@ #include #include #include +#include +#include #include #include #include @@ -86,6 +88,7 @@ enum { struct byt_rt5651_private { struct clk *mclk; + struct gpio_desc *ext_amp_gpio; struct snd_soc_jack jack; }; @@ -208,6 +211,20 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w, return 0; } +static int rt5651_ext_amp_power_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_card *card = w->dapm->card; + struct byt_rt5651_private *priv = snd_soc_card_get_drvdata(card); + + if (SND_SOC_DAPM_EVENT_ON(event)) + gpiod_set_value_cansleep(priv->ext_amp_gpio, 1); + else + gpiod_set_value_cansleep(priv->ext_amp_gpio, 0); + + return 0; +} + static const struct snd_soc_dapm_widget byt_rt5651_widgets[] = { SND_SOC_DAPM_HP("Headphone", NULL), SND_SOC_DAPM_MIC("Headset Mic", NULL), @@ -217,7 +234,9 @@ static const struct snd_soc_dapm_widget byt_rt5651_widgets[] = { SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0, platform_clock_control, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), - + SND_SOC_DAPM_SUPPLY("Ext Amp Power", SND_SOC_NOPM, 0, 0, + rt5651_ext_amp_power_event, + SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMU), }; static const struct snd_soc_dapm_route byt_rt5651_audio_map[] = { @@ -225,6 +244,7 @@ static const struct snd_soc_dapm_route byt_rt5651_audio_map[] = { {"Headset Mic", NULL, "Platform Clock"}, {"Internal Mic", NULL, "Platform Clock"}, {"Speaker", NULL, "Platform Clock"}, + {"Speaker", NULL, "Ext Amp Power"}, {"Line In", NULL, "Platform Clock"}, {"Headset Mic", NULL, "micbias1"}, /* lowercase for rt5651 */ @@ -678,6 +698,18 @@ static const struct x86_cpu_id baytrail_cpu_ids[] = { {} }; +static const struct x86_cpu_id cherrytrail_cpu_ids[] = { + { X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_AIRMONT }, /* Braswell */ + {} +}; + +static const struct acpi_gpio_params ext_amp_enable_gpios = { 0, 0, false }; + +static const struct acpi_gpio_mapping byt_rt5651_gpios[] = { + { "ext-amp-enable-gpios", &ext_amp_enable_gpios, 1 }, + { }, +}; + struct acpi_chan_package { /* ACPICA seems to require 64 bit integers */ u64 aif_value; /* 1: AIF1, 2: AIF2 */ u64 mclock_value; /* usually 25MHz (0x17d7940), ignored */ @@ -793,9 +825,36 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev) /* Must be called before register_card, also see declaration comment. */ ret_val = byt_rt5651_add_codec_device_props(codec_dev); - put_device(codec_dev); - if (ret_val) + if (ret_val) { + put_device(codec_dev); return ret_val; + } + + /* Cherry Trail devices use an external amplifier enable gpio */ + if (x86_match_cpu(cherrytrail_cpu_ids)) { + devm_acpi_dev_add_driver_gpios(codec_dev, byt_rt5651_gpios); + priv->ext_amp_gpio = devm_fwnode_get_index_gpiod_from_child( + &pdev->dev, "ext-amp-enable", 0, + codec_dev->fwnode, + GPIOD_OUT_LOW, "speaker-amp"); + if (IS_ERR(priv->ext_amp_gpio)) { + ret_val = PTR_ERR(priv->ext_amp_gpio); + switch (ret_val) { + case -ENOENT: + priv->ext_amp_gpio = NULL; + break; + default: + dev_err(&pdev->dev, "Failed to get ext-amp-enable GPIO: %d\n", + ret_val); + /* fall through */ + case -EPROBE_DEFER: + put_device(codec_dev); + return ret_val; + } + } + } + + put_device(codec_dev); log_quirks(&pdev->dev); -- cgit v1.2.3 From 8d2d7bcdc1645dc243f7735278675b083c0e506c Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 5 Jul 2018 00:59:31 +0200 Subject: ASoC: rt5651: Fix workqueue cancel vs irq free race on remove On removal we must free the IRQ *before* cancelling the jack-detect work, so that the jack-detect work cannot be rescheduled by the IRQ. Before this commit we were cancelling the jack-detect work from the driver remove callback, while relying on devm to free the IRQ, which happens after the remove callback. This is the wrong order. This commit uses a devm-action to register a devm callback which cancels the work, before requesting the IRQ (devm tears things down in reverse order). This also allows us to remove the now empty remove driver callback. Cc: Carlo Caione Signed-off-by: Hans de Goede Signed-off-by: Mark Brown --- sound/soc/codecs/rt5651.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-) diff --git a/sound/soc/codecs/rt5651.c b/sound/soc/codecs/rt5651.c index 6b5669f3e85d..39d2c67cd064 100644 --- a/sound/soc/codecs/rt5651.c +++ b/sound/soc/codecs/rt5651.c @@ -1696,6 +1696,13 @@ static irqreturn_t rt5651_irq(int irq, void *data) return IRQ_HANDLED; } +static void rt5651_cancel_work(void *data) +{ + struct rt5651_priv *rt5651 = data; + + cancel_work_sync(&rt5651->jack_detect_work); +} + static int rt5651_set_jack(struct snd_soc_component *component, struct snd_soc_jack *hp_jack, void *data) { @@ -2036,6 +2043,11 @@ static int rt5651_i2c_probe(struct i2c_client *i2c, INIT_WORK(&rt5651->jack_detect_work, rt5651_jack_detect_work); + /* Make sure work is stopped on probe-error / remove */ + ret = devm_add_action_or_reset(&i2c->dev, rt5651_cancel_work, rt5651); + if (ret) + return ret; + ret = devm_snd_soc_register_component(&i2c->dev, &soc_component_dev_rt5651, rt5651_dai, ARRAY_SIZE(rt5651_dai)); @@ -2043,15 +2055,6 @@ static int rt5651_i2c_probe(struct i2c_client *i2c, return ret; } -static int rt5651_i2c_remove(struct i2c_client *i2c) -{ - struct rt5651_priv *rt5651 = i2c_get_clientdata(i2c); - - cancel_work_sync(&rt5651->jack_detect_work); - - return 0; -} - static struct i2c_driver rt5651_i2c_driver = { .driver = { .name = "rt5651", @@ -2059,7 +2062,6 @@ static struct i2c_driver rt5651_i2c_driver = { .of_match_table = of_match_ptr(rt5651_of_match), }, .probe = rt5651_i2c_probe, - .remove = rt5651_i2c_remove, .id_table = rt5651_i2c_id, }; module_i2c_driver(rt5651_i2c_driver); -- cgit v1.2.3 From 34c906ddacd237511808fb2bbd941e6b91e9095a Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 5 Jul 2018 00:59:32 +0200 Subject: ASoC: rt5651: Allow disabling jack-detect by calling set_jack(NULL) Allow the machine driver to disable jack-detect over a suspend/resume by calling snd_soc_component_set_jack(NULL). Note this renames rt5651_set_jack, where all the jack-enable work was done to rt5651_enable_jack_detect. This function can now no longer fail as it does not request the IRQ anymore. It can still be passed an invalid jack source, but that should never happen, so this is now logged and treated as no jack source. Cc: Carlo Caione Signed-off-by: Hans de Goede Signed-off-by: Mark Brown --- sound/soc/codecs/rt5651.c | 55 +++++++++++++++++++++++++++++++---------------- 1 file changed, 36 insertions(+), 19 deletions(-) diff --git a/sound/soc/codecs/rt5651.c b/sound/soc/codecs/rt5651.c index 39d2c67cd064..40bd1e70fee7 100644 --- a/sound/soc/codecs/rt5651.c +++ b/sound/soc/codecs/rt5651.c @@ -1703,14 +1703,10 @@ static void rt5651_cancel_work(void *data) cancel_work_sync(&rt5651->jack_detect_work); } -static int rt5651_set_jack(struct snd_soc_component *component, - struct snd_soc_jack *hp_jack, void *data) +static void rt5651_enable_jack_detect(struct snd_soc_component *component, + struct snd_soc_jack *hp_jack) { struct rt5651_priv *rt5651 = snd_soc_component_get_drvdata(component); - int ret; - - if (!rt5651->irq) - return -EINVAL; /* IRQ output on GPIO1 */ snd_soc_component_update_bits(component, RT5651_GPIO_CTRL1, @@ -1737,10 +1733,10 @@ static int rt5651_set_jack(struct snd_soc_component *component, RT5651_JD2_IRQ_EN, RT5651_JD2_IRQ_EN); break; case RT5651_JD_NULL: - return 0; + return; default: dev_err(component->dev, "Currently only JD1_1 / JD1_2 / JD2 are supported\n"); - return -EINVAL; + return; } /* Enable jack detect power */ @@ -1774,19 +1770,28 @@ static int rt5651_set_jack(struct snd_soc_component *component, RT5651_MB1_OC_STKY_MASK, RT5651_MB1_OC_STKY_EN); rt5651->hp_jack = hp_jack; - - ret = devm_request_threaded_irq(component->dev, rt5651->irq, NULL, - rt5651_irq, - IRQF_TRIGGER_RISING | - IRQF_TRIGGER_FALLING | - IRQF_ONESHOT, "rt5651", rt5651); - if (ret) { - dev_err(component->dev, "Failed to reguest IRQ: %d\n", ret); - return ret; - } - + enable_irq(rt5651->irq); /* sync initial jack state */ queue_work(system_power_efficient_wq, &rt5651->jack_detect_work); +} + +static void rt5651_disable_jack_detect(struct snd_soc_component *component) +{ + struct rt5651_priv *rt5651 = snd_soc_component_get_drvdata(component); + + disable_irq(rt5651->irq); + rt5651_cancel_work(rt5651); + + rt5651->hp_jack = NULL; +} + +static int rt5651_set_jack(struct snd_soc_component *component, + struct snd_soc_jack *jack, void *data) +{ + if (jack) + rt5651_enable_jack_detect(component, jack); + else + rt5651_disable_jack_detect(component); return 0; } @@ -2048,6 +2053,18 @@ static int rt5651_i2c_probe(struct i2c_client *i2c, if (ret) return ret; + ret = devm_request_irq(&i2c->dev, rt5651->irq, rt5651_irq, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING + | IRQF_ONESHOT, "rt5651", rt5651); + if (ret == 0) { + /* Gets re-enabled by rt5651_set_jack() */ + disable_irq(rt5651->irq); + } else { + dev_warn(&i2c->dev, "Failed to reguest IRQ %d: %d\n", + rt5651->irq, ret); + rt5651->irq = -ENXIO; + } + ret = devm_snd_soc_register_component(&i2c->dev, &soc_component_dev_rt5651, rt5651_dai, ARRAY_SIZE(rt5651_dai)); -- cgit v1.2.3 From df1569f2006b157caa944367d0d431eb4ea08624 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 5 Jul 2018 00:59:33 +0200 Subject: ASoC: rt5651: Add button press support Enable button press detection for headsets by using the ovcd IRQ to get notified of button presses. This is modelled after (almost exactly copied from) the button press code for the rt5640 which has identical ovcd hardware. Signed-off-by: Hans de Goede Signed-off-by: Mark Brown --- sound/soc/codecs/rt5651.c | 158 ++++++++++++++++++++++++++++++++++++++++++++-- sound/soc/codecs/rt5651.h | 8 +++ 2 files changed, 159 insertions(+), 7 deletions(-) diff --git a/sound/soc/codecs/rt5651.c b/sound/soc/codecs/rt5651.c index 40bd1e70fee7..0462049e739c 100644 --- a/sound/soc/codecs/rt5651.c +++ b/sound/soc/codecs/rt5651.c @@ -1581,6 +1581,24 @@ static void rt5651_disable_micbias1_for_ovcd(struct snd_soc_component *component snd_soc_dapm_mutex_unlock(dapm); } +static void rt5651_enable_micbias1_ovcd_irq(struct snd_soc_component *component) +{ + struct rt5651_priv *rt5651 = snd_soc_component_get_drvdata(component); + + snd_soc_component_update_bits(component, RT5651_IRQ_CTRL2, + RT5651_IRQ_MB1_OC_MASK, RT5651_IRQ_MB1_OC_NOR); + rt5651->ovcd_irq_enabled = true; +} + +static void rt5651_disable_micbias1_ovcd_irq(struct snd_soc_component *component) +{ + struct rt5651_priv *rt5651 = snd_soc_component_get_drvdata(component); + + snd_soc_component_update_bits(component, RT5651_IRQ_CTRL2, + RT5651_IRQ_MB1_OC_MASK, RT5651_IRQ_MB1_OC_BP); + rt5651->ovcd_irq_enabled = false; +} + static void rt5651_clear_micbias1_ovcd(struct snd_soc_component *component) { snd_soc_component_update_bits(component, RT5651_IRQ_CTRL2, @@ -1622,10 +1640,80 @@ static bool rt5651_jack_inserted(struct snd_soc_component *component) return val == 0; } -/* Jack detect timings */ +/* Jack detect and button-press timings */ #define JACK_SETTLE_TIME 100 /* milli seconds */ #define JACK_DETECT_COUNT 5 #define JACK_DETECT_MAXCOUNT 20 /* Aprox. 2 seconds worth of tries */ +#define JACK_UNPLUG_TIME 80 /* milli seconds */ +#define BP_POLL_TIME 10 /* milli seconds */ +#define BP_POLL_MAXCOUNT 200 /* assume something is wrong after this */ +#define BP_THRESHOLD 3 + +static void rt5651_start_button_press_work(struct snd_soc_component *component) +{ + struct rt5651_priv *rt5651 = snd_soc_component_get_drvdata(component); + + rt5651->poll_count = 0; + rt5651->press_count = 0; + rt5651->release_count = 0; + rt5651->pressed = false; + rt5651->press_reported = false; + rt5651_clear_micbias1_ovcd(component); + schedule_delayed_work(&rt5651->bp_work, msecs_to_jiffies(BP_POLL_TIME)); +} + +static void rt5651_button_press_work(struct work_struct *work) +{ + struct rt5651_priv *rt5651 = + container_of(work, struct rt5651_priv, bp_work.work); + struct snd_soc_component *component = rt5651->component; + + /* Check the jack was not removed underneath us */ + if (!rt5651_jack_inserted(component)) + return; + + if (rt5651_micbias1_ovcd(component)) { + rt5651->release_count = 0; + rt5651->press_count++; + /* Remember till after JACK_UNPLUG_TIME wait */ + if (rt5651->press_count >= BP_THRESHOLD) + rt5651->pressed = true; + rt5651_clear_micbias1_ovcd(component); + } else { + rt5651->press_count = 0; + rt5651->release_count++; + } + + /* + * The pins get temporarily shorted on jack unplug, so we poll for + * at least JACK_UNPLUG_TIME milli-seconds before reporting a press. + */ + rt5651->poll_count++; + if (rt5651->poll_count < (JACK_UNPLUG_TIME / BP_POLL_TIME)) { + schedule_delayed_work(&rt5651->bp_work, + msecs_to_jiffies(BP_POLL_TIME)); + return; + } + + if (rt5651->pressed && !rt5651->press_reported) { + dev_dbg(component->dev, "headset button press\n"); + snd_soc_jack_report(rt5651->hp_jack, SND_JACK_BTN_0, + SND_JACK_BTN_0); + rt5651->press_reported = true; + } + + if (rt5651->release_count >= BP_THRESHOLD) { + if (rt5651->press_reported) { + dev_dbg(component->dev, "headset button release\n"); + snd_soc_jack_report(rt5651->hp_jack, 0, SND_JACK_BTN_0); + } + /* Re-enable OVCD IRQ to detect next press */ + rt5651_enable_micbias1_ovcd_irq(component); + return; /* Stop polling */ + } + + schedule_delayed_work(&rt5651->bp_work, msecs_to_jiffies(BP_POLL_TIME)); +} static int rt5651_detect_headset(struct snd_soc_component *component) { @@ -1676,15 +1764,58 @@ static void rt5651_jack_detect_work(struct work_struct *work) { struct rt5651_priv *rt5651 = container_of(work, struct rt5651_priv, jack_detect_work); + struct snd_soc_component *component = rt5651->component; int report = 0; - if (rt5651_jack_inserted(rt5651->component)) { - rt5651_enable_micbias1_for_ovcd(rt5651->component); - report = rt5651_detect_headset(rt5651->component); - rt5651_disable_micbias1_for_ovcd(rt5651->component); + if (!rt5651_jack_inserted(component)) { + /* Jack removed, or spurious IRQ? */ + if (rt5651->hp_jack->status & SND_JACK_HEADPHONE) { + if (rt5651->hp_jack->status & SND_JACK_MICROPHONE) { + cancel_delayed_work_sync(&rt5651->bp_work); + rt5651_disable_micbias1_ovcd_irq(component); + rt5651_disable_micbias1_for_ovcd(component); + } + snd_soc_jack_report(rt5651->hp_jack, 0, + SND_JACK_HEADSET | SND_JACK_BTN_0); + dev_dbg(component->dev, "jack unplugged\n"); + } + } else if (!(rt5651->hp_jack->status & SND_JACK_HEADPHONE)) { + /* Jack inserted */ + WARN_ON(rt5651->ovcd_irq_enabled); + rt5651_enable_micbias1_for_ovcd(component); + report = rt5651_detect_headset(component); + if (report == SND_JACK_HEADSET) { + /* Enable ovcd IRQ for button press detect. */ + rt5651_enable_micbias1_ovcd_irq(component); + } else { + /* No more need for overcurrent detect. */ + rt5651_disable_micbias1_for_ovcd(component); + } + dev_dbg(component->dev, "detect report %#02x\n", report); + snd_soc_jack_report(rt5651->hp_jack, report, SND_JACK_HEADSET); + } else if (rt5651->ovcd_irq_enabled && rt5651_micbias1_ovcd(component)) { + dev_dbg(component->dev, "OVCD IRQ\n"); + + /* + * The ovcd IRQ keeps firing while the button is pressed, so + * we disable it and start polling the button until released. + * + * The disable will make the IRQ pin 0 again and since we get + * IRQs on both edges (so as to detect both jack plugin and + * unplug) this means we will immediately get another IRQ. + * The ovcd_irq_enabled check above makes the 2ND IRQ a NOP. + */ + rt5651_disable_micbias1_ovcd_irq(component); + rt5651_start_button_press_work(component); + + /* + * If the jack-detect IRQ flag goes high (unplug) after our + * above rt5651_jack_inserted() check and before we have + * disabled the OVCD IRQ, the IRQ pin will stay high and as + * we react to edges, we miss the unplug event -> recheck. + */ + queue_work(system_long_wq, &rt5651->jack_detect_work); } - - snd_soc_jack_report(rt5651->hp_jack, report, SND_JACK_HEADSET); } static irqreturn_t rt5651_irq(int irq, void *data) @@ -1701,6 +1832,7 @@ static void rt5651_cancel_work(void *data) struct rt5651_priv *rt5651 = data; cancel_work_sync(&rt5651->jack_detect_work); + cancel_delayed_work_sync(&rt5651->bp_work); } static void rt5651_enable_jack_detect(struct snd_soc_component *component, @@ -1770,6 +1902,11 @@ static void rt5651_enable_jack_detect(struct snd_soc_component *component, RT5651_MB1_OC_STKY_MASK, RT5651_MB1_OC_STKY_EN); rt5651->hp_jack = hp_jack; + if (rt5651->hp_jack->status & SND_JACK_MICROPHONE) { + rt5651_enable_micbias1_for_ovcd(component); + rt5651_enable_micbias1_ovcd_irq(component); + } + enable_irq(rt5651->irq); /* sync initial jack state */ queue_work(system_power_efficient_wq, &rt5651->jack_detect_work); @@ -1782,6 +1919,12 @@ static void rt5651_disable_jack_detect(struct snd_soc_component *component) disable_irq(rt5651->irq); rt5651_cancel_work(rt5651); + if (rt5651->hp_jack->status & SND_JACK_MICROPHONE) { + rt5651_disable_micbias1_ovcd_irq(component); + rt5651_disable_micbias1_for_ovcd(component); + snd_soc_jack_report(rt5651->hp_jack, 0, SND_JACK_BTN_0); + } + rt5651->hp_jack = NULL; } @@ -2046,6 +2189,7 @@ static int rt5651_i2c_probe(struct i2c_client *i2c, rt5651->irq = i2c->irq; rt5651->hp_mute = 1; + INIT_DELAYED_WORK(&rt5651->bp_work, rt5651_button_press_work); INIT_WORK(&rt5651->jack_detect_work, rt5651_jack_detect_work); /* Make sure work is stopped on probe-error / remove */ diff --git a/sound/soc/codecs/rt5651.h b/sound/soc/codecs/rt5651.h index 3a0968c53fde..ac6de6fb5414 100644 --- a/sound/soc/codecs/rt5651.h +++ b/sound/soc/codecs/rt5651.h @@ -2071,8 +2071,16 @@ struct rt5651_pll_code { struct rt5651_priv { struct snd_soc_component *component; struct regmap *regmap; + /* Jack and button detect data */ struct snd_soc_jack *hp_jack; struct work_struct jack_detect_work; + struct delayed_work bp_work; + bool ovcd_irq_enabled; + bool pressed; + bool press_reported; + int press_count; + int release_count; + int poll_count; unsigned int jd_src; unsigned int ovcd_th; unsigned int ovcd_sf; -- cgit v1.2.3 From b91f432cbc3326f715b8c3f02ff4066ab398833f Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 5 Jul 2018 00:59:34 +0200 Subject: ASoC: Intel: bytcr_rt5651: Disable jack-detect over suspend/resume Disable jack-detection and thus the codec IRQ over suspend/resume. Signed-off-by: Hans de Goede Acked-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- sound/soc/intel/boards/bytcr_rt5651.c | 49 +++++++++++++++++++++++++++++++---- 1 file changed, 44 insertions(+), 5 deletions(-) diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c index 5301205496be..2a8f86dfe4cb 100644 --- a/sound/soc/intel/boards/bytcr_rt5651.c +++ b/sound/soc/intel/boards/bytcr_rt5651.c @@ -676,6 +676,48 @@ static struct snd_soc_dai_link byt_rt5651_dais[] = { }; /* SoC card */ +static char byt_rt5651_codec_name[SND_ACPI_I2C_ID_LEN]; +static char byt_rt5651_codec_aif_name[12]; /* = "rt5651-aif[1|2]" */ +static char byt_rt5651_cpu_dai_name[10]; /* = "ssp[0|2]-port" */ +static char byt_rt5651_long_name[40]; /* = "bytcr-rt5651-*-mic[-swapped-hp]" */ + +static int byt_rt5651_suspend(struct snd_soc_card *card) +{ + struct snd_soc_component *component; + + if (!BYT_RT5651_JDSRC(byt_rt5651_quirk)) + return 0; + + list_for_each_entry(component, &card->component_dev_list, card_list) { + if (!strcmp(component->name, byt_rt5651_codec_name)) { + dev_dbg(component->dev, "disabling jack detect before suspend\n"); + snd_soc_component_set_jack(component, NULL, NULL); + break; + } + } + + return 0; +} + +static int byt_rt5651_resume(struct snd_soc_card *card) +{ + struct byt_rt5651_private *priv = snd_soc_card_get_drvdata(card); + struct snd_soc_component *component; + + if (!BYT_RT5651_JDSRC(byt_rt5651_quirk)) + return 0; + + list_for_each_entry(component, &card->component_dev_list, card_list) { + if (!strcmp(component->name, byt_rt5651_codec_name)) { + dev_dbg(component->dev, "re-enabling jack detect after resume\n"); + snd_soc_component_set_jack(component, &priv->jack, NULL); + break; + } + } + + return 0; +} + static struct snd_soc_card byt_rt5651_card = { .name = "bytcr-rt5651", .owner = THIS_MODULE, @@ -686,13 +728,10 @@ static struct snd_soc_card byt_rt5651_card = { .dapm_routes = byt_rt5651_audio_map, .num_dapm_routes = ARRAY_SIZE(byt_rt5651_audio_map), .fully_routed = true, + .suspend_pre = byt_rt5651_suspend, + .resume_post = byt_rt5651_resume, }; -static char byt_rt5651_codec_name[SND_ACPI_I2C_ID_LEN]; -static char byt_rt5651_codec_aif_name[12]; /* = "rt5651-aif[1|2]" */ -static char byt_rt5651_cpu_dai_name[10]; /* = "ssp[0|2]-port" */ -static char byt_rt5651_long_name[40]; /* = "bytcr-rt5651-*-mic[-swapped-hp]" */ - static const struct x86_cpu_id baytrail_cpu_ids[] = { { X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_SILVERMONT1 }, /* Valleyview */ {} -- cgit v1.2.3 From caed9d636e857997e923dfe473b9310de645d916 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 5 Jul 2018 00:59:35 +0200 Subject: ASoC: Intel: bytcr_rt5651: Reporting button presses Enable reporting of button presses now that the codec driver recently has gotten support for this. Signed-off-by: Hans de Goede Acked-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- sound/soc/intel/boards/bytcr_rt5651.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c index 2a8f86dfe4cb..b687043c8425 100644 --- a/sound/soc/intel/boards/bytcr_rt5651.c +++ b/sound/soc/intel/boards/bytcr_rt5651.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include @@ -531,13 +532,17 @@ static int byt_rt5651_init(struct snd_soc_pcm_runtime *runtime) if (BYT_RT5651_JDSRC(byt_rt5651_quirk)) { ret = snd_soc_card_jack_new(runtime->card, "Headset", - SND_JACK_HEADSET, &priv->jack, - bytcr_jack_pins, ARRAY_SIZE(bytcr_jack_pins)); + SND_JACK_HEADSET | SND_JACK_BTN_0, + &priv->jack, bytcr_jack_pins, + ARRAY_SIZE(bytcr_jack_pins)); if (ret) { dev_err(runtime->dev, "jack creation failed %d\n", ret); return ret; } + snd_jack_set_key(priv->jack.jack, SND_JACK_BTN_0, + KEY_PLAYPAUSE); + ret = snd_soc_component_set_jack(codec, &priv->jack, NULL); if (ret) return ret; -- cgit v1.2.3 From 5292221d6ddfed75e5b46cd42237a677094b99f3 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 10 Jul 2018 12:56:45 -0500 Subject: Revert "drm/amd/display: Don't return ddc result and read_bytes in same return value" This reverts commit 018d82e5f02ef3583411bcaa4e00c69786f46f19. This breaks DDC in certain cases. Revert for 4.18 and previous kernels. For 4.19, this is fixed with the following more extensive patches: drm/amd/display: Serialize is_dp_sink_present drm/amd/display: Break out function to simply read aux reply drm/amd/display: Return aux replies directly to DRM drm/amd/display: Right shift AUX reply value sooner than later drm/amd/display: Read AUX channel even if only status byte is returned Link: https://lists.freedesktop.org/archives/amd-gfx/2018-July/023788.html Acked-by: Harry Wentland Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- .../drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c | 20 ++++++++------------ drivers/gpu/drm/amd/display/dc/core/dc_link_ddc.c | 10 +++------- drivers/gpu/drm/amd/display/dc/inc/dc_link_ddc.h | 5 ++--- 3 files changed, 13 insertions(+), 22 deletions(-) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c index 4304d9e408b8..ace9ad578ca0 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c @@ -83,22 +83,21 @@ static ssize_t dm_dp_aux_transfer(struct drm_dp_aux *aux, enum i2c_mot_mode mot = (msg->request & DP_AUX_I2C_MOT) ? I2C_MOT_TRUE : I2C_MOT_FALSE; enum ddc_result res; - uint32_t read_bytes = msg->size; + ssize_t read_bytes; if (WARN_ON(msg->size > 16)) return -E2BIG; switch (msg->request & ~DP_AUX_I2C_MOT) { case DP_AUX_NATIVE_READ: - res = dal_ddc_service_read_dpcd_data( + read_bytes = dal_ddc_service_read_dpcd_data( TO_DM_AUX(aux)->ddc_service, false, I2C_MOT_UNDEF, msg->address, msg->buffer, - msg->size, - &read_bytes); - break; + msg->size); + return read_bytes; case DP_AUX_NATIVE_WRITE: res = dal_ddc_service_write_dpcd_data( TO_DM_AUX(aux)->ddc_service, @@ -109,15 +108,14 @@ static ssize_t dm_dp_aux_transfer(struct drm_dp_aux *aux, msg->size); break; case DP_AUX_I2C_READ: - res = dal_ddc_service_read_dpcd_data( + read_bytes = dal_ddc_service_read_dpcd_data( TO_DM_AUX(aux)->ddc_service, true, mot, msg->address, msg->buffer, - msg->size, - &read_bytes); - break; + msg->size); + return read_bytes; case DP_AUX_I2C_WRITE: res = dal_ddc_service_write_dpcd_data( TO_DM_AUX(aux)->ddc_service, @@ -139,9 +137,7 @@ static ssize_t dm_dp_aux_transfer(struct drm_dp_aux *aux, r == DDC_RESULT_SUCESSFULL); #endif - if (res != DDC_RESULT_SUCESSFULL) - return -EIO; - return read_bytes; + return msg->size; } static enum drm_connector_status diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_ddc.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_ddc.c index ae48d603ebd6..49c2face1e7a 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_link_ddc.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_ddc.c @@ -629,14 +629,13 @@ bool dal_ddc_service_query_ddc_data( return ret; } -enum ddc_result dal_ddc_service_read_dpcd_data( +ssize_t dal_ddc_service_read_dpcd_data( struct ddc_service *ddc, bool i2c, enum i2c_mot_mode mot, uint32_t address, uint8_t *data, - uint32_t len, - uint32_t *read) + uint32_t len) { struct aux_payload read_payload = { .i2c_over_aux = i2c, @@ -653,8 +652,6 @@ enum ddc_result dal_ddc_service_read_dpcd_data( .mot = mot }; - *read = 0; - if (len > DEFAULT_AUX_MAX_DATA_SIZE) { BREAK_TO_DEBUGGER(); return DDC_RESULT_FAILED_INVALID_OPERATION; @@ -664,8 +661,7 @@ enum ddc_result dal_ddc_service_read_dpcd_data( ddc->ctx->i2caux, ddc->ddc_pin, &command)) { - *read = command.payloads->length; - return DDC_RESULT_SUCESSFULL; + return (ssize_t)command.payloads->length; } return DDC_RESULT_FAILED_OPERATION; diff --git a/drivers/gpu/drm/amd/display/dc/inc/dc_link_ddc.h b/drivers/gpu/drm/amd/display/dc/inc/dc_link_ddc.h index 30b3a08b91be..090b7a8dd67b 100644 --- a/drivers/gpu/drm/amd/display/dc/inc/dc_link_ddc.h +++ b/drivers/gpu/drm/amd/display/dc/inc/dc_link_ddc.h @@ -102,14 +102,13 @@ bool dal_ddc_service_query_ddc_data( uint8_t *read_buf, uint32_t read_size); -enum ddc_result dal_ddc_service_read_dpcd_data( +ssize_t dal_ddc_service_read_dpcd_data( struct ddc_service *ddc, bool i2c, enum i2c_mot_mode mot, uint32_t address, uint8_t *data, - uint32_t len, - uint32_t *read); + uint32_t len); enum ddc_result dal_ddc_service_write_dpcd_data( struct ddc_service *ddc, -- cgit v1.2.3 From ed6b4b5559769c6c5a0fcb3fac8a9e1f4e58c4ae Mon Sep 17 00:00:00 2001 From: Michel Dänzer Date: Mon, 25 Jun 2018 11:07:17 +0200 Subject: drm/amdgpu: Reserve VM root shared fence slot for command submission (v3) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Without this, there could not be enough slots, which could trigger the BUG_ON in reservation_object_add_shared_fence. v2: * Jump to the error label instead of returning directly (Jerry Zhang) v3: * Reserve slots for command submission after VM updates (Christian König) Cc: stable@vger.kernel.org Bugzilla: https://bugs.freedesktop.org/106418 Reported-by: mikhail.v.gavrilov@gmail.com Signed-off-by: Michel Dänzer Signed-off-by: Junwei Zhang Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c index 82312a7bc6ad..9c85a90be293 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c @@ -927,6 +927,10 @@ static int amdgpu_cs_ib_vm_chunk(struct amdgpu_device *adev, r = amdgpu_bo_vm_update_pte(p); if (r) return r; + + r = reservation_object_reserve_shared(vm->root.base.bo->tbo.resv); + if (r) + return r; } return amdgpu_cs_sync_rings(p); -- cgit v1.2.3 From 0b9021972d3eef525d53076d8c7ac091e988d2e4 Mon Sep 17 00:00:00 2001 From: Christian König Date: Fri, 6 Jul 2018 13:46:05 +0200 Subject: drm/amd/display: fix invalid function table override MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Otherwise we try to program hardware with the wrong watermark functions when multiple DCE generations are installed in one system. Signed-off-by: Christian König Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/display/dc/dce/dce_mem_input.c | 27 ++++++++++++++++++++-- 1 file changed, 25 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_mem_input.c b/drivers/gpu/drm/amd/display/dc/dce/dce_mem_input.c index b235a75355b8..bae752332a9f 100644 --- a/drivers/gpu/drm/amd/display/dc/dce/dce_mem_input.c +++ b/drivers/gpu/drm/amd/display/dc/dce/dce_mem_input.c @@ -741,6 +741,29 @@ static struct mem_input_funcs dce_mi_funcs = { .mem_input_is_flip_pending = dce_mi_is_flip_pending }; +static struct mem_input_funcs dce112_mi_funcs = { + .mem_input_program_display_marks = dce112_mi_program_display_marks, + .allocate_mem_input = dce_mi_allocate_dmif, + .free_mem_input = dce_mi_free_dmif, + .mem_input_program_surface_flip_and_addr = + dce_mi_program_surface_flip_and_addr, + .mem_input_program_pte_vm = dce_mi_program_pte_vm, + .mem_input_program_surface_config = + dce_mi_program_surface_config, + .mem_input_is_flip_pending = dce_mi_is_flip_pending +}; + +static struct mem_input_funcs dce120_mi_funcs = { + .mem_input_program_display_marks = dce120_mi_program_display_marks, + .allocate_mem_input = dce_mi_allocate_dmif, + .free_mem_input = dce_mi_free_dmif, + .mem_input_program_surface_flip_and_addr = + dce_mi_program_surface_flip_and_addr, + .mem_input_program_pte_vm = dce_mi_program_pte_vm, + .mem_input_program_surface_config = + dce_mi_program_surface_config, + .mem_input_is_flip_pending = dce_mi_is_flip_pending +}; void dce_mem_input_construct( struct dce_mem_input *dce_mi, @@ -769,7 +792,7 @@ void dce112_mem_input_construct( const struct dce_mem_input_mask *mi_mask) { dce_mem_input_construct(dce_mi, ctx, inst, regs, mi_shift, mi_mask); - dce_mi->base.funcs->mem_input_program_display_marks = dce112_mi_program_display_marks; + dce_mi->base.funcs = &dce112_mi_funcs; } void dce120_mem_input_construct( @@ -781,5 +804,5 @@ void dce120_mem_input_construct( const struct dce_mem_input_mask *mi_mask) { dce_mem_input_construct(dce_mi, ctx, inst, regs, mi_shift, mi_mask); - dce_mi->base.funcs->mem_input_program_display_marks = dce120_mi_program_display_marks; + dce_mi->base.funcs = &dce120_mi_funcs; } -- cgit v1.2.3 From 9d4a0d4cdc8b5904ec7c9b9e04bab3e9e60d7a74 Mon Sep 17 00:00:00 2001 From: Andrey Grodzovsky Date: Thu, 5 Jul 2018 14:49:34 -0400 Subject: drm/amdgpu: Verify root PD is mapped into kernel address space (v4) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Problem: When PD/PT update made by CPU root PD was not yet mapped causing page fault. Fix: Verify root PD is mapped into CPU address space. v2: Make sure that we add the root PD to the relocated list since then it's get mapped into CPU address space bt default in amdgpu_vm_update_directories. v3: Drop change to not move kernel type BOs to evicted list. v4: Remove redundant bo move to relocated list. Link: https://bugs.freedesktop.org/show_bug.cgi?id=107065 Signed-off-by: Andrey Grodzovsky Reviewed-by: Christian König Reviewed-by: Junwei Zhang Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c index edf16b2b957a..fdcb498f6d19 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c @@ -107,6 +107,9 @@ static void amdgpu_vm_bo_base_init(struct amdgpu_vm_bo_base *base, return; list_add_tail(&base->bo_list, &bo->va); + if (bo->tbo.type == ttm_bo_type_kernel) + list_move(&base->vm_status, &vm->relocated); + if (bo->tbo.resv != vm->root.base.bo->tbo.resv) return; @@ -468,7 +471,6 @@ static int amdgpu_vm_alloc_levels(struct amdgpu_device *adev, pt->parent = amdgpu_bo_ref(parent->base.bo); amdgpu_vm_bo_base_init(&entry->base, vm, pt); - list_move(&entry->base.vm_status, &vm->relocated); } if (level < AMDGPU_VM_PTB) { -- cgit v1.2.3 From b5f3bc39a0e815a30005da246dd4ad47fd2f88ff Mon Sep 17 00:00:00 2001 From: Quinn Tran Date: Mon, 2 Jul 2018 13:01:58 -0700 Subject: scsi: qla2xxx: Fix inconsistent DMA mem alloc/free GPNFT command allocates 2 buffer for switch query. On completion, the same buffers were freed using different size, instead of using original size at the time of allocation. This patch saves the size of the request and response buffers and uses that to free them. Following stack trace can be seen when using debug kernel dump_stack+0x19/0x1b __warn+0xd8/0x100 warn_slowpath_fmt+0x5f/0x80 check_unmap+0xfb/0xa20 debug_dma_free_coherent+0x110/0x160 qla24xx_sp_unmap+0x131/0x1e0 [qla2xxx] qla24xx_async_gnnft_done+0xb6/0x550 [qla2xxx] qla2x00_do_work+0x1ec/0x9f0 [qla2xxx] Cc: # v4.17+ Fixes: 33b28357dd00 ("scsi: qla2xxx: Fix Async GPN_FT for FCP and FC-NVMe scan") Reported-by: Ewan D. Milne Signed-off-by: Quinn Tran Signed-off-by: Himanshu Madhani Signed-off-by: Himanshu Madhani Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_def.h | 2 ++ drivers/scsi/qla2xxx/qla_gs.c | 40 ++++++++++++++++++++++++++-------------- 2 files changed, 28 insertions(+), 14 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 9442e18aef6f..0f94b1d62d3f 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -361,6 +361,8 @@ struct ct_arg { dma_addr_t rsp_dma; u32 req_size; u32 rsp_size; + u32 req_allocated_size; + u32 rsp_allocated_size; void *req; void *rsp; port_id_t id; diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c index 4bc2b66b299f..2c35b0b2baa0 100644 --- a/drivers/scsi/qla2xxx/qla_gs.c +++ b/drivers/scsi/qla2xxx/qla_gs.c @@ -556,7 +556,7 @@ err2: /* please ignore kernel warning. otherwise, we have mem leak. */ if (sp->u.iocb_cmd.u.ctarg.req) { dma_free_coherent(&vha->hw->pdev->dev, - sizeof(struct ct_sns_pkt), + sp->u.iocb_cmd.u.ctarg.req_allocated_size, sp->u.iocb_cmd.u.ctarg.req, sp->u.iocb_cmd.u.ctarg.req_dma); sp->u.iocb_cmd.u.ctarg.req = NULL; @@ -564,7 +564,7 @@ err2: if (sp->u.iocb_cmd.u.ctarg.rsp) { dma_free_coherent(&vha->hw->pdev->dev, - sizeof(struct ct_sns_pkt), + sp->u.iocb_cmd.u.ctarg.rsp_allocated_size, sp->u.iocb_cmd.u.ctarg.rsp, sp->u.iocb_cmd.u.ctarg.rsp_dma); sp->u.iocb_cmd.u.ctarg.rsp = NULL; @@ -617,6 +617,7 @@ static int qla_async_rftid(scsi_qla_host_t *vha, port_id_t *d_id) sp->u.iocb_cmd.u.ctarg.req = dma_alloc_coherent(&vha->hw->pdev->dev, sizeof(struct ct_sns_pkt), &sp->u.iocb_cmd.u.ctarg.req_dma, GFP_KERNEL); + sp->u.iocb_cmd.u.ctarg.req_allocated_size = sizeof(struct ct_sns_pkt); if (!sp->u.iocb_cmd.u.ctarg.req) { ql_log(ql_log_warn, vha, 0xd041, "%s: Failed to allocate ct_sns request.\n", @@ -627,6 +628,7 @@ static int qla_async_rftid(scsi_qla_host_t *vha, port_id_t *d_id) sp->u.iocb_cmd.u.ctarg.rsp = dma_alloc_coherent(&vha->hw->pdev->dev, sizeof(struct ct_sns_pkt), &sp->u.iocb_cmd.u.ctarg.rsp_dma, GFP_KERNEL); + sp->u.iocb_cmd.u.ctarg.rsp_allocated_size = sizeof(struct ct_sns_pkt); if (!sp->u.iocb_cmd.u.ctarg.rsp) { ql_log(ql_log_warn, vha, 0xd042, "%s: Failed to allocate ct_sns request.\n", @@ -712,6 +714,7 @@ static int qla_async_rffid(scsi_qla_host_t *vha, port_id_t *d_id, sp->u.iocb_cmd.u.ctarg.req = dma_alloc_coherent(&vha->hw->pdev->dev, sizeof(struct ct_sns_pkt), &sp->u.iocb_cmd.u.ctarg.req_dma, GFP_KERNEL); + sp->u.iocb_cmd.u.ctarg.req_allocated_size = sizeof(struct ct_sns_pkt); if (!sp->u.iocb_cmd.u.ctarg.req) { ql_log(ql_log_warn, vha, 0xd041, "%s: Failed to allocate ct_sns request.\n", @@ -722,6 +725,7 @@ static int qla_async_rffid(scsi_qla_host_t *vha, port_id_t *d_id, sp->u.iocb_cmd.u.ctarg.rsp = dma_alloc_coherent(&vha->hw->pdev->dev, sizeof(struct ct_sns_pkt), &sp->u.iocb_cmd.u.ctarg.rsp_dma, GFP_KERNEL); + sp->u.iocb_cmd.u.ctarg.rsp_allocated_size = sizeof(struct ct_sns_pkt); if (!sp->u.iocb_cmd.u.ctarg.rsp) { ql_log(ql_log_warn, vha, 0xd042, "%s: Failed to allocate ct_sns request.\n", @@ -802,6 +806,7 @@ static int qla_async_rnnid(scsi_qla_host_t *vha, port_id_t *d_id, sp->u.iocb_cmd.u.ctarg.req = dma_alloc_coherent(&vha->hw->pdev->dev, sizeof(struct ct_sns_pkt), &sp->u.iocb_cmd.u.ctarg.req_dma, GFP_KERNEL); + sp->u.iocb_cmd.u.ctarg.req_allocated_size = sizeof(struct ct_sns_pkt); if (!sp->u.iocb_cmd.u.ctarg.req) { ql_log(ql_log_warn, vha, 0xd041, "%s: Failed to allocate ct_sns request.\n", @@ -812,6 +817,7 @@ static int qla_async_rnnid(scsi_qla_host_t *vha, port_id_t *d_id, sp->u.iocb_cmd.u.ctarg.rsp = dma_alloc_coherent(&vha->hw->pdev->dev, sizeof(struct ct_sns_pkt), &sp->u.iocb_cmd.u.ctarg.rsp_dma, GFP_KERNEL); + sp->u.iocb_cmd.u.ctarg.rsp_allocated_size = sizeof(struct ct_sns_pkt); if (!sp->u.iocb_cmd.u.ctarg.rsp) { ql_log(ql_log_warn, vha, 0xd042, "%s: Failed to allocate ct_sns request.\n", @@ -909,6 +915,7 @@ static int qla_async_rsnn_nn(scsi_qla_host_t *vha) sp->u.iocb_cmd.u.ctarg.req = dma_alloc_coherent(&vha->hw->pdev->dev, sizeof(struct ct_sns_pkt), &sp->u.iocb_cmd.u.ctarg.req_dma, GFP_KERNEL); + sp->u.iocb_cmd.u.ctarg.req_allocated_size = sizeof(struct ct_sns_pkt); if (!sp->u.iocb_cmd.u.ctarg.req) { ql_log(ql_log_warn, vha, 0xd041, "%s: Failed to allocate ct_sns request.\n", @@ -919,6 +926,7 @@ static int qla_async_rsnn_nn(scsi_qla_host_t *vha) sp->u.iocb_cmd.u.ctarg.rsp = dma_alloc_coherent(&vha->hw->pdev->dev, sizeof(struct ct_sns_pkt), &sp->u.iocb_cmd.u.ctarg.rsp_dma, GFP_KERNEL); + sp->u.iocb_cmd.u.ctarg.rsp_allocated_size = sizeof(struct ct_sns_pkt); if (!sp->u.iocb_cmd.u.ctarg.rsp) { ql_log(ql_log_warn, vha, 0xd042, "%s: Failed to allocate ct_sns request.\n", @@ -3388,14 +3396,14 @@ void qla24xx_sp_unmap(scsi_qla_host_t *vha, srb_t *sp) { if (sp->u.iocb_cmd.u.ctarg.req) { dma_free_coherent(&vha->hw->pdev->dev, - sizeof(struct ct_sns_pkt), + sp->u.iocb_cmd.u.ctarg.req_allocated_size, sp->u.iocb_cmd.u.ctarg.req, sp->u.iocb_cmd.u.ctarg.req_dma); sp->u.iocb_cmd.u.ctarg.req = NULL; } if (sp->u.iocb_cmd.u.ctarg.rsp) { dma_free_coherent(&vha->hw->pdev->dev, - sizeof(struct ct_sns_pkt), + sp->u.iocb_cmd.u.ctarg.rsp_allocated_size, sp->u.iocb_cmd.u.ctarg.rsp, sp->u.iocb_cmd.u.ctarg.rsp_dma); sp->u.iocb_cmd.u.ctarg.rsp = NULL; @@ -3596,14 +3604,14 @@ static void qla2x00_async_gpnid_sp_done(void *s, int res) /* please ignore kernel warning. otherwise, we have mem leak. */ if (sp->u.iocb_cmd.u.ctarg.req) { dma_free_coherent(&vha->hw->pdev->dev, - sizeof(struct ct_sns_pkt), + sp->u.iocb_cmd.u.ctarg.req_allocated_size, sp->u.iocb_cmd.u.ctarg.req, sp->u.iocb_cmd.u.ctarg.req_dma); sp->u.iocb_cmd.u.ctarg.req = NULL; } if (sp->u.iocb_cmd.u.ctarg.rsp) { dma_free_coherent(&vha->hw->pdev->dev, - sizeof(struct ct_sns_pkt), + sp->u.iocb_cmd.u.ctarg.rsp_allocated_size, sp->u.iocb_cmd.u.ctarg.rsp, sp->u.iocb_cmd.u.ctarg.rsp_dma); sp->u.iocb_cmd.u.ctarg.rsp = NULL; @@ -3654,6 +3662,7 @@ int qla24xx_async_gpnid(scsi_qla_host_t *vha, port_id_t *id) sp->u.iocb_cmd.u.ctarg.req = dma_alloc_coherent(&vha->hw->pdev->dev, sizeof(struct ct_sns_pkt), &sp->u.iocb_cmd.u.ctarg.req_dma, GFP_KERNEL); + sp->u.iocb_cmd.u.ctarg.req_allocated_size = sizeof(struct ct_sns_pkt); if (!sp->u.iocb_cmd.u.ctarg.req) { ql_log(ql_log_warn, vha, 0xd041, "Failed to allocate ct_sns request.\n"); @@ -3663,6 +3672,7 @@ int qla24xx_async_gpnid(scsi_qla_host_t *vha, port_id_t *id) sp->u.iocb_cmd.u.ctarg.rsp = dma_alloc_coherent(&vha->hw->pdev->dev, sizeof(struct ct_sns_pkt), &sp->u.iocb_cmd.u.ctarg.rsp_dma, GFP_KERNEL); + sp->u.iocb_cmd.u.ctarg.rsp_allocated_size = sizeof(struct ct_sns_pkt); if (!sp->u.iocb_cmd.u.ctarg.rsp) { ql_log(ql_log_warn, vha, 0xd042, "Failed to allocate ct_sns request.\n"); @@ -4142,14 +4152,14 @@ static void qla2x00_async_gpnft_gnnft_sp_done(void *s, int res) */ if (sp->u.iocb_cmd.u.ctarg.req) { dma_free_coherent(&vha->hw->pdev->dev, - sizeof(struct ct_sns_pkt), + sp->u.iocb_cmd.u.ctarg.req_allocated_size, sp->u.iocb_cmd.u.ctarg.req, sp->u.iocb_cmd.u.ctarg.req_dma); sp->u.iocb_cmd.u.ctarg.req = NULL; } if (sp->u.iocb_cmd.u.ctarg.rsp) { dma_free_coherent(&vha->hw->pdev->dev, - sizeof(struct ct_sns_pkt), + sp->u.iocb_cmd.u.ctarg.rsp_allocated_size, sp->u.iocb_cmd.u.ctarg.rsp, sp->u.iocb_cmd.u.ctarg.rsp_dma); sp->u.iocb_cmd.u.ctarg.rsp = NULL; @@ -4179,14 +4189,14 @@ static void qla2x00_async_gpnft_gnnft_sp_done(void *s, int res) /* please ignore kernel warning. Otherwise, we have mem leak. */ if (sp->u.iocb_cmd.u.ctarg.req) { dma_free_coherent(&vha->hw->pdev->dev, - sizeof(struct ct_sns_pkt), + sp->u.iocb_cmd.u.ctarg.req_allocated_size, sp->u.iocb_cmd.u.ctarg.req, sp->u.iocb_cmd.u.ctarg.req_dma); sp->u.iocb_cmd.u.ctarg.req = NULL; } if (sp->u.iocb_cmd.u.ctarg.rsp) { dma_free_coherent(&vha->hw->pdev->dev, - sizeof(struct ct_sns_pkt), + sp->u.iocb_cmd.u.ctarg.rsp_allocated_size, sp->u.iocb_cmd.u.ctarg.rsp, sp->u.iocb_cmd.u.ctarg.rsp_dma); sp->u.iocb_cmd.u.ctarg.rsp = NULL; @@ -4281,14 +4291,14 @@ static int qla24xx_async_gnnft(scsi_qla_host_t *vha, struct srb *sp, done_free_sp: if (sp->u.iocb_cmd.u.ctarg.req) { dma_free_coherent(&vha->hw->pdev->dev, - sizeof(struct ct_sns_pkt), + sp->u.iocb_cmd.u.ctarg.req_allocated_size, sp->u.iocb_cmd.u.ctarg.req, sp->u.iocb_cmd.u.ctarg.req_dma); sp->u.iocb_cmd.u.ctarg.req = NULL; } if (sp->u.iocb_cmd.u.ctarg.rsp) { dma_free_coherent(&vha->hw->pdev->dev, - sizeof(struct ct_sns_pkt), + sp->u.iocb_cmd.u.ctarg.rsp_allocated_size, sp->u.iocb_cmd.u.ctarg.rsp, sp->u.iocb_cmd.u.ctarg.rsp_dma); sp->u.iocb_cmd.u.ctarg.rsp = NULL; @@ -4349,6 +4359,7 @@ int qla24xx_async_gpnft(scsi_qla_host_t *vha, u8 fc4_type, srb_t *sp) sp->u.iocb_cmd.u.ctarg.req = dma_zalloc_coherent( &vha->hw->pdev->dev, sizeof(struct ct_sns_pkt), &sp->u.iocb_cmd.u.ctarg.req_dma, GFP_KERNEL); + sp->u.iocb_cmd.u.ctarg.req_allocated_size = sizeof(struct ct_sns_pkt); if (!sp->u.iocb_cmd.u.ctarg.req) { ql_log(ql_log_warn, vha, 0xffff, "Failed to allocate ct_sns request.\n"); @@ -4366,6 +4377,7 @@ int qla24xx_async_gpnft(scsi_qla_host_t *vha, u8 fc4_type, srb_t *sp) sp->u.iocb_cmd.u.ctarg.rsp = dma_zalloc_coherent( &vha->hw->pdev->dev, rspsz, &sp->u.iocb_cmd.u.ctarg.rsp_dma, GFP_KERNEL); + sp->u.iocb_cmd.u.ctarg.rsp_allocated_size = sizeof(struct ct_sns_pkt); if (!sp->u.iocb_cmd.u.ctarg.rsp) { ql_log(ql_log_warn, vha, 0xffff, "Failed to allocate ct_sns request.\n"); @@ -4425,14 +4437,14 @@ int qla24xx_async_gpnft(scsi_qla_host_t *vha, u8 fc4_type, srb_t *sp) done_free_sp: if (sp->u.iocb_cmd.u.ctarg.req) { dma_free_coherent(&vha->hw->pdev->dev, - sizeof(struct ct_sns_pkt), + sp->u.iocb_cmd.u.ctarg.req_allocated_size, sp->u.iocb_cmd.u.ctarg.req, sp->u.iocb_cmd.u.ctarg.req_dma); sp->u.iocb_cmd.u.ctarg.req = NULL; } if (sp->u.iocb_cmd.u.ctarg.rsp) { dma_free_coherent(&vha->hw->pdev->dev, - sizeof(struct ct_sns_pkt), + sp->u.iocb_cmd.u.ctarg.rsp_allocated_size, sp->u.iocb_cmd.u.ctarg.rsp, sp->u.iocb_cmd.u.ctarg.rsp_dma); sp->u.iocb_cmd.u.ctarg.rsp = NULL; -- cgit v1.2.3 From d48cc67cd4406d589fdbfa8c7d51c86532f86feb Mon Sep 17 00:00:00 2001 From: "himanshu.madhani@cavium.com" Date: Mon, 2 Jul 2018 13:01:59 -0700 Subject: scsi: qla2xxx: Fix kernel crash due to late workqueue allocation This patch fixes crash for FCoE adapter. Once driver initialization is complete, firmware will start posting Asynchronous Event, However driver has not yet allocated workqueue to process and queue up work. This delay of allocating workqueue results into NULL pointer access. The following stack trace is seen: [ 24.577259] BUG: unable to handle kernel NULL pointer dereference at 0000000000000102 [ 24.623133] PGD 0 P4D 0 [ 24.636760] Oops: 0000 [#1] SMP NOPTI [ 24.656942] Modules linked in: i2c_algo_bit drm_kms_helper sr_mod(+) syscopyarea sysfillrect sysimgblt cdrom fb_sys_fops ata_generic ttm pata_acpi sd_mod ahci pata_atiixp sfc(+) qla2xxx(+) libahci drm qla4xxx(+) nvme_fc hpsa mdio libiscsi qlcnic(+) nvme_fabrics scsi_transport_sas serio_raw mtd crc32c_intel libata nvme_core i2c_core scsi_transport_iscsi tg3 scsi_transport_fc bnx2 iscsi_boot_sysfs dm_multipath dm_mirror dm_region_hash dm_log dm_mod [ 24.887449] CPU: 0 PID: 177 Comm: kworker/0:3 Not tainted 4.17.0-rc6 #1 [ 24.925119] Hardware name: HP ProLiant DL385 G7, BIOS A18 08/15/2012 [ 24.962106] Workqueue: events work_for_cpu_fn [ 24.987098] RIP: 0010:__queue_work+0x1f/0x3a0 [ 25.011672] RSP: 0018:ffff992642ceba10 EFLAGS: 00010082 [ 25.042116] RAX: 0000000000000082 RBX: 0000000000000082 RCX: 0000000000000000 [ 25.083293] RDX: ffff8cf9abc6d7d0 RSI: 0000000000000000 RDI: 0000000000002000 [ 25.123094] RBP: 0000000000000000 R08: 0000000000025a40 R09: ffff8cf9aade2880 [ 25.164087] R10: 0000000000000000 R11: ffff992642ceb6f0 R12: ffff8cf9abc6d7d0 [ 25.202280] R13: 0000000000002000 R14: ffff8cf9abc6d7b8 R15: 0000000000002000 [ 25.242050] FS: 0000000000000000(0000) f9b5c00000(0000) knlGS:0000000000000000 [ 25.977565] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 26.010457] CR2: 0000000000000102 CR3: 000000030760a000 CR4: 00000000000406f0 [ 26.051048] Call Trace: [ 26.063572] ? __switch_to_asm+0x34/0x70 [ 26.086079] queue_work_on+0x24/0x40 [ 26.107090] qla2x00_post_work+0x81/0xb0 [qla2xxx] [ 26.133356] qla2x00_async_event+0x1ad/0x1a20 [qla2xxx] [ 26.164075] ? lock_timer_base+0x67/0x80 [ 26.186420] ? try_to_del_timer_sync+0x4d/0x80 [ 26.212284] ? del_timer_sync+0x35/0x40 [ 26.234080] ? schedule_timeout+0x165/0x2f0 [ 26.259575] qla82xx_poll+0x13e/0x180 [qla2xxx] [ 26.285740] qla2x00_mailbox_command+0x74b/0xf50 [qla2xxx] [ 26.319040] qla82xx_set_driver_version+0x13b/0x1c0 [qla2xxx] [ 26.352108] ? qla2x00_init_rings+0x206/0x3f0 [qla2xxx] [ 26.381733] qla2x00_initialize_adapter+0x35c/0x7f0 [qla2xxx] [ 26.413240] qla2x00_probe_one+0x1479/0x2390 [qla2xxx] [ 26.442055] local_pci_probe+0x3f/0xa0 [ 26.463108] work_for_cpu_fn+0x10/0x20 [ 26.483295] process_one_work+0x152/0x350 [ 26.505730] worker_thread+0x1cf/0x3e0 [ 26.527090] kthread+0xf5/0x130 [ 26.545085] ? max_active_store+0x80/0x80 [ 26.568085] ? kthread_bind+0x10/0x10 [ 26.589533] ret_from_fork+0x22/0x40 [ 26.610192] Code: 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 57 41 89 ff 41 56 41 55 41 89 fd 41 54 49 89 d4 55 48 89 f5 53 48 83 ec 0 86 02 01 00 00 01 0f 85 80 02 00 00 49 c7 c6 c0 ec 01 00 41 [ 27.308540] RIP: __queue_work+0x1f/0x3a0 RSP: ffff992642ceba10 [ 27.341591] CR2: 0000000000000102 [ 27.360208] ---[ end trace 01b7b7ae2c005cf3 ]--- Cc: # v4.17+ Fixes: 9b3e0f4d4147 ("scsi: qla2xxx: Move work element processing out of DPC thread" Reported-by: Li Wang Tested-by: Li Wang Signed-off-by: Himanshu Madhani Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_os.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index e881fce7477a..9f309e572be4 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -3180,6 +3180,8 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) "req->req_q_in=%p req->req_q_out=%p rsp->rsp_q_in=%p rsp->rsp_q_out=%p.\n", req->req_q_in, req->req_q_out, rsp->rsp_q_in, rsp->rsp_q_out); + ha->wq = alloc_workqueue("qla2xxx_wq", 0, 0); + if (ha->isp_ops->initialize_adapter(base_vha)) { ql_log(ql_log_fatal, base_vha, 0x00d6, "Failed to initialize adapter - Adapter flags %x.\n", @@ -3216,8 +3218,6 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) host->can_queue, base_vha->req, base_vha->mgmt_svr_loop_id, host->sg_tablesize); - ha->wq = alloc_workqueue("qla2xxx_wq", 0, 0); - if (ha->mqenable) { bool mq = false; bool startit = false; -- cgit v1.2.3 From 36eb8ff672faee83ccce60c191f0fef07c6adce6 Mon Sep 17 00:00:00 2001 From: Chuck Anderson Date: Mon, 2 Jul 2018 13:02:00 -0700 Subject: scsi: qla2xxx: Fix NULL pointer dereference for fcport search Crash dump shows following instructions crash> bt PID: 0 TASK: ffffffffbe412480 CPU: 0 COMMAND: "swapper/0" #0 [ffff891ee0003868] machine_kexec at ffffffffbd063ef1 #1 [ffff891ee00038c8] __crash_kexec at ffffffffbd12b6f2 #2 [ffff891ee0003998] crash_kexec at ffffffffbd12c84c #3 [ffff891ee00039b8] oops_end at ffffffffbd030f0a #4 [ffff891ee00039e0] no_context at ffffffffbd074643 #5 [ffff891ee0003a40] __bad_area_nosemaphore at ffffffffbd07496e #6 [ffff891ee0003a90] bad_area_nosemaphore at ffffffffbd074a64 #7 [ffff891ee0003aa0] __do_page_fault at ffffffffbd074b0a #8 [ffff891ee0003b18] do_page_fault at ffffffffbd074fc8 #9 [ffff891ee0003b50] page_fault at ffffffffbda01925 [exception RIP: qlt_schedule_sess_for_deletion+15] RIP: ffffffffc02e526f RSP: ffff891ee0003c08 RFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffffc0307847 RDX: 00000000000020e6 RSI: ffff891edbc377c8 RDI: 0000000000000000 RBP: ffff891ee0003c18 R8: ffffffffc02f0b20 R9: 0000000000000250 R10: 0000000000000258 R11: 000000000000b780 R12: ffff891ed9b43000 R13: 00000000000000f0 R14: 0000000000000006 R15: ffff891edbc377c8 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #10 [ffff891ee0003c20] qla2x00_fcport_event_handler at ffffffffc02853d3 [qla2xxx] #11 [ffff891ee0003cf0] __dta_qla24xx_async_gnl_sp_done_333 at ffffffffc0285a1d [qla2xxx] #12 [ffff891ee0003de8] qla24xx_process_response_queue at ffffffffc02a2eb5 [qla2xxx] #13 [ffff891ee0003e88] qla24xx_msix_rsp_q at ffffffffc02a5403 [qla2xxx] #14 [ffff891ee0003ec0] __handle_irq_event_percpu at ffffffffbd0f4c59 #15 [ffff891ee0003f10] handle_irq_event_percpu at ffffffffbd0f4e02 #16 [ffff891ee0003f40] handle_irq_event at ffffffffbd0f4e90 #17 [ffff891ee0003f68] handle_edge_irq at ffffffffbd0f8984 #18 [ffff891ee0003f88] handle_irq at ffffffffbd0305d5 #19 [ffff891ee0003fb8] do_IRQ at ffffffffbda02a18 --- --- #20 [ffffffffbe403d30] ret_from_intr at ffffffffbda0094e [exception RIP: unknown or invalid address] RIP: 000000000000001f RSP: 0000000000000000 RFLAGS: fff3b8c2091ebb3f RAX: ffffbba5a0000200 RBX: 0000be8cdfa8f9fa RCX: 0000000000000018 RDX: 0000000000000101 RSI: 000000000000015d RDI: 0000000000000193 RBP: 0000000000000083 R8: ffffffffbe403e38 R9: 0000000000000002 R10: 0000000000000000 R11: ffffffffbe56b820 R12: ffff891ee001cf00 R13: ffffffffbd11c0a4 R14: ffffffffbe403d60 R15: 0000000000000001 ORIG_RAX: ffff891ee0022ac0 CS: 0000 SS: ffffffffffffffb9 bt: WARNING: possibly bogus exception frame #21 [ffffffffbe403dd8] cpuidle_enter_state at ffffffffbd67c6fd #22 [ffffffffbe403e40] cpuidle_enter at ffffffffbd67c907 #23 [ffffffffbe403e50] call_cpuidle at ffffffffbd0d98f3 #24 [ffffffffbe403e60] do_idle at ffffffffbd0d9b42 #25 [ffffffffbe403e98] cpu_startup_entry at ffffffffbd0d9da3 #26 [ffffffffbe403ec0] rest_init at ffffffffbd81d4aa #27 [ffffffffbe403ed0] start_kernel at ffffffffbe67d2ca #28 [ffffffffbe403f28] x86_64_start_reservations at ffffffffbe67c675 #29 [ffffffffbe403f38] x86_64_start_kernel at ffffffffbe67c6eb #30 [ffffffffbe403f50] secondary_startup_64 at ffffffffbd0000d5 Fixes: 040036bb0bc1 ("scsi: qla2xxx: Delay loop id allocation at login") Cc: # v4.17+ Signed-off-by: Chuck Anderson Signed-off-by: Himanshu Madhani Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_init.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 7b675243bd16..db0e3279e07a 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -591,12 +591,14 @@ static void qla24xx_handle_gnl_done_event(scsi_qla_host_t *vha, conflict_fcport = qla2x00_find_fcport_by_wwpn(vha, e->port_name, 0); - ql_dbg(ql_dbg_disc, vha, 0x20e6, - "%s %d %8phC post del sess\n", - __func__, __LINE__, - conflict_fcport->port_name); - qlt_schedule_sess_for_deletion - (conflict_fcport); + if (conflict_fcport) { + qlt_schedule_sess_for_deletion + (conflict_fcport); + ql_dbg(ql_dbg_disc, vha, 0x20e6, + "%s %d %8phC post del sess\n", + __func__, __LINE__, + conflict_fcport->port_name); + } } /* FW already picked this loop id for another fcport */ -- cgit v1.2.3 From f13cff6c25bd8986627365346d123312ee7baa78 Mon Sep 17 00:00:00 2001 From: Damien Le Moal Date: Tue, 3 Jul 2018 15:23:58 +0900 Subject: scsi: sd_zbc: Fix variable type and bogus comment Fix the description of sd_zbc_check_zone_size() to correctly explain that the returned value is a number of device blocks, not bytes. Additionally, the 32 bits "ret" variable used in this function may truncate the 64 bits zone_blocks variable value upon return. To fix this, change "ret" type to s64. Fixes: ccce20fc79 ("sd_zbc: Avoid that resetting a zone fails sporadically") Signed-off-by: Damien Le Moal Cc: Bart Van Assche Cc: stable@kernel.org Reviewed-by: Hannes Reinecke Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen --- drivers/scsi/sd_zbc.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/sd_zbc.c b/drivers/scsi/sd_zbc.c index a14fef11776e..2bf3bf73886e 100644 --- a/drivers/scsi/sd_zbc.c +++ b/drivers/scsi/sd_zbc.c @@ -391,7 +391,8 @@ static int sd_zbc_check_capacity(struct scsi_disk *sdkp, unsigned char *buf) * Check that all zones of the device are equal. The last zone can however * be smaller. The zone size must also be a power of two number of LBAs. * - * Returns the zone size in bytes upon success or an error code upon failure. + * Returns the zone size in number of blocks upon success or an error code + * upon failure. */ static s64 sd_zbc_check_zone_size(struct scsi_disk *sdkp) { @@ -401,7 +402,7 @@ static s64 sd_zbc_check_zone_size(struct scsi_disk *sdkp) unsigned char *rec; unsigned int buf_len; unsigned int list_length; - int ret; + s64 ret; u8 same; /* Get a buffer */ -- cgit v1.2.3 From 01d0e789a14aa735ddcfddd468ef06d4f917e06d Mon Sep 17 00:00:00 2001 From: Don Brace Date: Tue, 3 Jul 2018 17:34:48 -0500 Subject: scsi: hpsa: correct enclosure sas address The original complaint was the lsscsi -t showed the same SAS address of the two enclosures (SEP devices). In fact the SAS address was being set to the Enclosure Logical Identifier (ELI). Reviewed-by: Scott Teel Reviewed-by: Kevin Barnett Signed-off-by: Don Brace Signed-off-by: Martin K. Petersen --- drivers/scsi/hpsa.c | 25 +++++++++++++++++++++---- drivers/scsi/hpsa.h | 1 + 2 files changed, 22 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 15c7f3b6f35e..58bb70b886d7 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -3440,11 +3440,11 @@ static void hpsa_get_enclosure_info(struct ctlr_info *h, struct ext_report_lun_entry *rle = &rlep->LUN[rle_index]; u16 bmic_device_index = 0; - bmic_device_index = GET_BMIC_DRIVE_NUMBER(&rle->lunid[0]); - - encl_dev->sas_address = + encl_dev->eli = hpsa_get_enclosure_logical_identifier(h, scsi3addr); + bmic_device_index = GET_BMIC_DRIVE_NUMBER(&rle->lunid[0]); + if (encl_dev->target == -1 || encl_dev->lun == -1) { rc = IO_OK; goto out; @@ -9697,7 +9697,24 @@ hpsa_sas_get_linkerrors(struct sas_phy *phy) static int hpsa_sas_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier) { - *identifier = rphy->identify.sas_address; + struct Scsi_Host *shost = phy_to_shost(rphy); + struct ctlr_info *h; + struct hpsa_scsi_dev_t *sd; + + if (!shost) + return -ENXIO; + + h = shost_to_hba(shost); + + if (!h) + return -ENXIO; + + sd = hpsa_find_device_by_sas_rphy(h, rphy); + if (!sd) + return -ENXIO; + + *identifier = sd->eli; + return 0; } diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h index fb9f5e7f8209..59e023696fff 100644 --- a/drivers/scsi/hpsa.h +++ b/drivers/scsi/hpsa.h @@ -68,6 +68,7 @@ struct hpsa_scsi_dev_t { #define RAID_CTLR_LUNID "\0\0\0\0\0\0\0\0" unsigned char device_id[16]; /* from inquiry pg. 0x83 */ u64 sas_address; + u64 eli; /* from report diags. */ unsigned char vendor[8]; /* bytes 8-15 of inquiry data */ unsigned char model[16]; /* bytes 16-31 of inquiry data */ unsigned char rev; /* byte 2 of inquiry data */ -- cgit v1.2.3 From 6ac174756dfc9884f08b23af840ca911155f5578 Mon Sep 17 00:00:00 2001 From: Saurav Kashyap Date: Thu, 5 Jul 2018 07:01:33 -0700 Subject: scsi: qedf: Send the driver state to MFW Need to notify firmware when driver is loaded and unloaded. Signed-off-by: Saurav Kashyap Signed-off-by: Chad Dupuis Signed-off-by: Martin K. Petersen --- drivers/scsi/qedf/qedf_main.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/scsi/qedf/qedf_main.c b/drivers/scsi/qedf/qedf_main.c index 90394cef0f41..0a5dd5595dd3 100644 --- a/drivers/scsi/qedf/qedf_main.c +++ b/drivers/scsi/qedf/qedf_main.c @@ -3295,6 +3295,11 @@ static int __qedf_probe(struct pci_dev *pdev, int mode) init_completion(&qedf->flogi_compl); + status = qed_ops->common->update_drv_state(qedf->cdev, true); + if (status) + QEDF_ERR(&(qedf->dbg_ctx), + "Failed to send drv state to MFW.\n"); + memset(&link_params, 0, sizeof(struct qed_link_params)); link_params.link_up = true; status = qed_ops->common->set_link(qedf->cdev, &link_params); @@ -3343,6 +3348,7 @@ static int qedf_probe(struct pci_dev *pdev, const struct pci_device_id *id) static void __qedf_remove(struct pci_dev *pdev, int mode) { struct qedf_ctx *qedf; + int rc; if (!pdev) { QEDF_ERR(NULL, "pdev is NULL.\n"); @@ -3437,6 +3443,12 @@ static void __qedf_remove(struct pci_dev *pdev, int mode) qed_ops->common->set_power_state(qedf->cdev, PCI_D0); pci_set_drvdata(pdev, NULL); } + + rc = qed_ops->common->update_drv_state(qedf->cdev, false); + if (rc) + QEDF_ERR(&(qedf->dbg_ctx), + "Failed to send drv state to MFW.\n"); + qed_ops->common->slowpath_stop(qedf->cdev); qed_ops->common->remove(qedf->cdev); -- cgit v1.2.3 From a3440d0d2f57f7ba102fc332086961cf261180af Mon Sep 17 00:00:00 2001 From: Manish Rangankar Date: Mon, 2 Jul 2018 23:52:31 -0700 Subject: scsi: qedi: Send driver state to MFW In case of iSCSI offload BFS environment, MFW requires to mark virtual link based upon qedi load status. Signed-off-by: Manish Rangankar Signed-off-by: Martin K. Petersen --- drivers/scsi/qedi/qedi_main.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/scsi/qedi/qedi_main.c b/drivers/scsi/qedi/qedi_main.c index cf274a79e77a..091ec1207bea 100644 --- a/drivers/scsi/qedi/qedi_main.c +++ b/drivers/scsi/qedi/qedi_main.c @@ -2273,6 +2273,7 @@ kset_free: static void __qedi_remove(struct pci_dev *pdev, int mode) { struct qedi_ctx *qedi = pci_get_drvdata(pdev); + int rval; if (qedi->tmf_thread) { flush_workqueue(qedi->tmf_thread); @@ -2302,6 +2303,10 @@ static void __qedi_remove(struct pci_dev *pdev, int mode) if (mode == QEDI_MODE_NORMAL) qedi_free_iscsi_pf_param(qedi); + rval = qedi_ops->common->update_drv_state(qedi->cdev, false); + if (rval) + QEDI_ERR(&qedi->dbg_ctx, "Failed to send drv state to MFW\n"); + if (!test_bit(QEDI_IN_OFFLINE, &qedi->flags)) { qedi_ops->common->slowpath_stop(qedi->cdev); qedi_ops->common->remove(qedi->cdev); @@ -2576,6 +2581,12 @@ static int __qedi_probe(struct pci_dev *pdev, int mode) if (qedi_setup_boot_info(qedi)) QEDI_ERR(&qedi->dbg_ctx, "No iSCSI boot target configured\n"); + + rc = qedi_ops->common->update_drv_state(qedi->cdev, true); + if (rc) + QEDI_ERR(&qedi->dbg_ctx, + "Failed to send drv state to MFW\n"); + } return 0; -- cgit v1.2.3 From 943e59fe78ee870d86c775fc9fee2ab68bd262a3 Mon Sep 17 00:00:00 2001 From: Cédric Le Goater Date: Thu, 5 Jul 2018 07:26:23 +0200 Subject: scsi: cxlflash: fix assignment of the backend operations MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit cd43c221bb5e ("scsi: cxlflash: Isolate external module dependencies") introduced the use of ifdefs to avoid compilation errors when one of the possible backend driver, CXL or OCXL, is not compiled. Unfortunately, the wrong defines are used and the backend ops are never assigned, leading to a kernel crash in any case when the cxlflash module is loaded. Signed-off-by: Cédric Le Goater Acked-by: Matthew R. Ochs Signed-off-by: Martin K. Petersen --- drivers/scsi/cxlflash/main.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/cxlflash/main.h b/drivers/scsi/cxlflash/main.h index 2a3977823812..a39be94d110c 100644 --- a/drivers/scsi/cxlflash/main.h +++ b/drivers/scsi/cxlflash/main.h @@ -107,12 +107,12 @@ cxlflash_assign_ops(struct dev_dependent_vals *ddv) { const struct cxlflash_backend_ops *ops = NULL; -#ifdef CONFIG_OCXL +#ifdef CONFIG_OCXL_BASE if (ddv->flags & CXLFLASH_OCXL_DEV) ops = &cxlflash_ocxl_ops; #endif -#ifdef CONFIG_CXL +#ifdef CONFIG_CXL_BASE if (!(ddv->flags & CXLFLASH_OCXL_DEV)) ops = &cxlflash_cxl_ops; #endif -- cgit v1.2.3 From b4e7a7a88b5d060650094b8d3454bc521d669f6a Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 8 Jun 2018 11:17:54 -0400 Subject: drm_mode_create_lease_ioctl(): fix open-coded filp_clone_open() Failure of ->open() should *not* be followed by fput(). Fixed by using filp_clone_open(), which gets the cleanups right. Cc: stable@vger.kernel.org Acked-by: Linus Torvalds Signed-off-by: Al Viro --- drivers/gpu/drm/drm_lease.c | 16 +--------------- fs/internal.h | 1 - include/linux/fs.h | 1 + 3 files changed, 2 insertions(+), 16 deletions(-) diff --git a/drivers/gpu/drm/drm_lease.c b/drivers/gpu/drm/drm_lease.c index 50c73c0a20b9..d638c0fb3418 100644 --- a/drivers/gpu/drm/drm_lease.c +++ b/drivers/gpu/drm/drm_lease.c @@ -553,24 +553,13 @@ int drm_mode_create_lease_ioctl(struct drm_device *dev, /* Clone the lessor file to create a new file for us */ DRM_DEBUG_LEASE("Allocating lease file\n"); - path_get(&lessor_file->f_path); - lessee_file = alloc_file(&lessor_file->f_path, - lessor_file->f_mode, - fops_get(lessor_file->f_inode->i_fop)); - + lessee_file = filp_clone_open(lessor_file); if (IS_ERR(lessee_file)) { ret = PTR_ERR(lessee_file); goto out_lessee; } - /* Initialize the new file for DRM */ - DRM_DEBUG_LEASE("Initializing the file with %p\n", lessee_file->f_op->open); - ret = lessee_file->f_op->open(lessee_file->f_inode, lessee_file); - if (ret) - goto out_lessee_file; - lessee_priv = lessee_file->private_data; - /* Change the file to a master one */ drm_master_put(&lessee_priv->master); lessee_priv->master = lessee; @@ -588,9 +577,6 @@ int drm_mode_create_lease_ioctl(struct drm_device *dev, DRM_DEBUG_LEASE("drm_mode_create_lease_ioctl succeeded\n"); return 0; -out_lessee_file: - fput(lessee_file); - out_lessee: drm_master_put(&lessee); diff --git a/fs/internal.h b/fs/internal.h index 980d005b21b4..5645b4ebf494 100644 --- a/fs/internal.h +++ b/fs/internal.h @@ -127,7 +127,6 @@ int do_fchownat(int dfd, const char __user *filename, uid_t user, gid_t group, extern int open_check_o_direct(struct file *f); extern int vfs_open(const struct path *, struct file *, const struct cred *); -extern struct file *filp_clone_open(struct file *); /* * inode.c diff --git a/include/linux/fs.h b/include/linux/fs.h index 5c91108846db..aa9b4c169ed2 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2422,6 +2422,7 @@ extern struct file *filp_open(const char *, int, umode_t); extern struct file *file_open_root(struct dentry *, struct vfsmount *, const char *, int, umode_t); extern struct file * dentry_open(const struct path *, int, const struct cred *); +extern struct file *filp_clone_open(struct file *); extern int filp_close(struct file *, fl_owner_t id); extern struct filename *getname_flags(const char __user *, int, int *); -- cgit v1.2.3 From d202797f480c0e5918e7642d6716cdc62b3ab5c9 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 9 Jun 2018 09:43:13 -0400 Subject: cxl_getfile(): fix double-iput() on alloc_file() failures Doing iput() after path_put() is wrong. Cc: stable@vger.kernel.org Acked-by: Linus Torvalds Signed-off-by: Al Viro --- drivers/misc/cxl/api.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/misc/cxl/api.c b/drivers/misc/cxl/api.c index 753b1a698fc4..6b16946f9b05 100644 --- a/drivers/misc/cxl/api.c +++ b/drivers/misc/cxl/api.c @@ -103,15 +103,15 @@ static struct file *cxl_getfile(const char *name, d_instantiate(path.dentry, inode); file = alloc_file(&path, OPEN_FMODE(flags), fops); - if (IS_ERR(file)) - goto err_dput; + if (IS_ERR(file)) { + path_put(&path); + goto err_fs; + } file->f_flags = flags & (O_ACCMODE | O_NONBLOCK); file->private_data = priv; return file; -err_dput: - path_put(&path); err_inode: iput(inode); err_fs: -- cgit v1.2.3 From c7e9075fb89362812059fbf8e25bb4a6e825c4c5 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 17 Jun 2018 12:38:17 -0400 Subject: ocxlflash_getfile(): fix double-iput() on alloc_file() failures Cc: stable@vger.kernel.org Acked-by: Linus Torvalds Signed-off-by: Al Viro --- drivers/scsi/cxlflash/ocxl_hw.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/cxlflash/ocxl_hw.c b/drivers/scsi/cxlflash/ocxl_hw.c index 0a95b5f25380..497a68389461 100644 --- a/drivers/scsi/cxlflash/ocxl_hw.c +++ b/drivers/scsi/cxlflash/ocxl_hw.c @@ -134,15 +134,14 @@ static struct file *ocxlflash_getfile(struct device *dev, const char *name, rc = PTR_ERR(file); dev_err(dev, "%s: alloc_file failed rc=%d\n", __func__, rc); - goto err5; + path_put(&path); + goto err3; } file->f_flags = flags & (O_ACCMODE | O_NONBLOCK); file->private_data = priv; out: return file; -err5: - path_put(&path); err4: iput(inode); err3: -- cgit v1.2.3 From 435ffb76f8b35be108a52bf1c43233a57b3c72b4 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Thu, 5 Jul 2018 12:13:48 +0200 Subject: ASoC: dpcm: rework runtime stream merge The goal of this patch is to simplify a bit dpcm runtime stream merge by removing several local variables. ATM, merge functions return the BE 'filter' values which should then be filtered against the FE stream values. This create a lot of local variable and unnecessary init of min and max. Instead of this, we can pass the FE stream values directly and let the BE filtering functions perform the merge 'in-place' Signed-off-by: Jerome Brunet Signed-off-by: Mark Brown --- sound/soc/soc-pcm.c | 39 +++++++++++++++------------------------ 1 file changed, 15 insertions(+), 24 deletions(-) diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c index b7e67b871c0c..114e6c060cae 100644 --- a/sound/soc/soc-pcm.c +++ b/sound/soc/soc-pcm.c @@ -1672,29 +1672,28 @@ unwind: } static void dpcm_init_runtime_hw(struct snd_pcm_runtime *runtime, - struct snd_soc_pcm_stream *stream, - u64 formats) + struct snd_soc_pcm_stream *stream) { runtime->hw.rate_min = stream->rate_min; runtime->hw.rate_max = stream->rate_max; runtime->hw.channels_min = stream->channels_min; runtime->hw.channels_max = stream->channels_max; if (runtime->hw.formats) - runtime->hw.formats &= formats & stream->formats; + runtime->hw.formats &= stream->formats; else - runtime->hw.formats = formats & stream->formats; + runtime->hw.formats = stream->formats; runtime->hw.rates = stream->rates; } -static u64 dpcm_runtime_base_format(struct snd_pcm_substream *substream) +static void dpcm_runtime_merge_format(struct snd_pcm_substream *substream, + u64 *formats) { struct snd_soc_pcm_runtime *fe = substream->private_data; struct snd_soc_dpcm *dpcm; - u64 formats = ULLONG_MAX; int stream = substream->stream; if (!fe->dai_link->dpcm_merged_format) - return formats; + return; /* * It returns merged BE codec format @@ -1714,16 +1713,14 @@ static u64 dpcm_runtime_base_format(struct snd_pcm_substream *substream) else codec_stream = &codec_dai_drv->capture; - formats &= codec_stream->formats; + *formats &= codec_stream->formats; } } - - return formats; } -static void dpcm_runtime_base_chan(struct snd_pcm_substream *substream, - unsigned int *channels_min, - unsigned int *channels_max) +static void dpcm_runtime_merge_chan(struct snd_pcm_substream *substream, + unsigned int *channels_min, + unsigned int *channels_max) { struct snd_soc_pcm_runtime *fe = substream->private_data; struct snd_soc_dpcm *dpcm; @@ -1732,9 +1729,6 @@ static void dpcm_runtime_base_chan(struct snd_pcm_substream *substream, if (!fe->dai_link->dpcm_merged_chan) return; - *channels_min = 0; - *channels_max = UINT_MAX; - /* * It returns merged BE codec channel; * if FE want to use it (= dpcm_merged_chan) @@ -1781,18 +1775,15 @@ static void dpcm_set_fe_runtime(struct snd_pcm_substream *substream) struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_dai *cpu_dai = rtd->cpu_dai; struct snd_soc_dai_driver *cpu_dai_drv = cpu_dai->driver; - u64 format = dpcm_runtime_base_format(substream); - unsigned int channels_min = 0, channels_max = UINT_MAX; if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) - dpcm_init_runtime_hw(runtime, &cpu_dai_drv->playback, format); + dpcm_init_runtime_hw(runtime, &cpu_dai_drv->playback); else - dpcm_init_runtime_hw(runtime, &cpu_dai_drv->capture, format); - - dpcm_runtime_base_chan(substream, &channels_min, &channels_max); + dpcm_init_runtime_hw(runtime, &cpu_dai_drv->capture); - runtime->hw.channels_min = max(channels_min, runtime->hw.channels_min); - runtime->hw.channels_max = min(channels_max, runtime->hw.channels_max); + dpcm_runtime_merge_format(substream, &runtime->hw.formats); + dpcm_runtime_merge_chan(substream, &runtime->hw.channels_min, + &runtime->hw.channels_max); } static int dpcm_fe_dai_do_trigger(struct snd_pcm_substream *substream, int cmd); -- cgit v1.2.3 From baacd8d100d571aa713c3c60b1471b9962e6ec8a Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Thu, 5 Jul 2018 12:13:49 +0200 Subject: ASoC: dpcm: add rate merge to the BE stream merge As done for format and channels, add the possibility to merge the backend rates on the frontend rates. This useful if the backend does not support all rates supported by the frontend, or if several backends (cpu and codecs) with different capabilities are connected to the same frontend. Signed-off-by: Jerome Brunet Signed-off-by: Mark Brown --- include/sound/soc.h | 2 ++ sound/soc/soc-pcm.c | 60 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 62 insertions(+) diff --git a/include/sound/soc.h b/include/sound/soc.h index 870ba6b64817..a4915148f739 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -964,6 +964,8 @@ struct snd_soc_dai_link { unsigned int dpcm_merged_format:1; /* DPCM used FE & BE merged channel */ unsigned int dpcm_merged_chan:1; + /* DPCM used FE & BE merged rate */ + unsigned int dpcm_merged_rate:1; /* pmdown_time is ignored at stop */ unsigned int ignore_pmdown_time:1; diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c index 114e6c060cae..4019bc10897c 100644 --- a/sound/soc/soc-pcm.c +++ b/sound/soc/soc-pcm.c @@ -1769,6 +1769,64 @@ static void dpcm_runtime_merge_chan(struct snd_pcm_substream *substream, } } +static void dpcm_runtime_merge_rate(struct snd_pcm_substream *substream, + unsigned int *rates, + unsigned int *rate_min, + unsigned int *rate_max) +{ + struct snd_soc_pcm_runtime *fe = substream->private_data; + struct snd_soc_dpcm *dpcm; + int stream = substream->stream; + + if (!fe->dai_link->dpcm_merged_rate) + return; + + /* + * It returns merged BE codec channel; + * if FE want to use it (= dpcm_merged_chan) + */ + + list_for_each_entry(dpcm, &fe->dpcm[stream].be_clients, list_be) { + struct snd_soc_pcm_runtime *be = dpcm->be; + struct snd_soc_dai_driver *cpu_dai_drv = be->cpu_dai->driver; + struct snd_soc_dai_driver *codec_dai_drv; + struct snd_soc_pcm_stream *codec_stream; + struct snd_soc_pcm_stream *cpu_stream; + int i; + + if (stream == SNDRV_PCM_STREAM_PLAYBACK) + cpu_stream = &cpu_dai_drv->playback; + else + cpu_stream = &cpu_dai_drv->capture; + + *rate_min = max(*rate_min, cpu_stream->rate_min); + *rate_max = min_not_zero(*rate_max, cpu_stream->rate_max); + *rates = snd_pcm_rate_mask_intersect(*rates, cpu_stream->rates); + + for (i = 0; i < be->num_codecs; i++) { + /* + * Skip CODECs which don't support the current stream + * type. See soc_pcm_init_runtime_hw() for more details + */ + if (!snd_soc_dai_stream_valid(be->codec_dais[i], + stream)) + continue; + + codec_dai_drv = be->codec_dais[i]->driver; + if (stream == SNDRV_PCM_STREAM_PLAYBACK) + codec_stream = &codec_dai_drv->playback; + else + codec_stream = &codec_dai_drv->capture; + + *rate_min = max(*rate_min, codec_stream->rate_min); + *rate_max = min_not_zero(*rate_max, + codec_stream->rate_max); + *rates = snd_pcm_rate_mask_intersect(*rates, + codec_stream->rates); + } + } +} + static void dpcm_set_fe_runtime(struct snd_pcm_substream *substream) { struct snd_pcm_runtime *runtime = substream->runtime; @@ -1784,6 +1842,8 @@ static void dpcm_set_fe_runtime(struct snd_pcm_substream *substream) dpcm_runtime_merge_format(substream, &runtime->hw.formats); dpcm_runtime_merge_chan(substream, &runtime->hw.channels_min, &runtime->hw.channels_max); + dpcm_runtime_merge_rate(substream, &runtime->hw.rates, + &runtime->hw.rate_min, &runtime->hw.rate_max); } static int dpcm_fe_dai_do_trigger(struct snd_pcm_substream *substream, int cmd); -- cgit v1.2.3 From 565b9937f44d5ab7956339b6c105c03471ce3243 Mon Sep 17 00:00:00 2001 From: Joel Stanley Date: Fri, 29 Jun 2018 08:45:40 +0930 Subject: clk: aspeed: Support HPLL strapping on ast2400 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The HPLL can be configured through a register (SCU24), however some platforms chose to configure it through the strapping settings and do not use the register. This was not noticed as the logic for bit 18 in SCU24 was confused: set means programmed, but the driver read it as set means strapped. This gives us the correct HPLL value on Palmetto systems, from which most of the peripheral clocks are generated. Fixes: 5eda5d79e4be ("clk: Add clock driver for ASPEED BMC SoCs") Cc: stable@vger.kernel.org # v4.15 Reviewed-by: Cédric Le Goater Signed-off-by: Joel Stanley Signed-off-by: Stephen Boyd --- drivers/clk/clk-aspeed.c | 42 +++++++++++++++++++++++++++++------------- 1 file changed, 29 insertions(+), 13 deletions(-) diff --git a/drivers/clk/clk-aspeed.c b/drivers/clk/clk-aspeed.c index 0fc446ecdf54..7b70a074095d 100644 --- a/drivers/clk/clk-aspeed.c +++ b/drivers/clk/clk-aspeed.c @@ -24,7 +24,7 @@ #define ASPEED_MPLL_PARAM 0x20 #define ASPEED_HPLL_PARAM 0x24 #define AST2500_HPLL_BYPASS_EN BIT(20) -#define AST2400_HPLL_STRAPPED BIT(18) +#define AST2400_HPLL_PROGRAMMED BIT(18) #define AST2400_HPLL_BYPASS_EN BIT(17) #define ASPEED_MISC_CTRL 0x2c #define UART_DIV13_EN BIT(12) @@ -578,29 +578,45 @@ builtin_platform_driver(aspeed_clk_driver); static void __init aspeed_ast2400_cc(struct regmap *map) { struct clk_hw *hw; - u32 val, freq, div; + u32 val, div, clkin, hpll; + const u16 hpll_rates[][4] = { + {384, 360, 336, 408}, + {400, 375, 350, 425}, + }; + int rate; /* * CLKIN is the crystal oscillator, 24, 48 or 25MHz selected by * strapping */ regmap_read(map, ASPEED_STRAP, &val); - if (val & CLKIN_25MHZ_EN) - freq = 25000000; - else if (val & AST2400_CLK_SOURCE_SEL) - freq = 48000000; - else - freq = 24000000; - hw = clk_hw_register_fixed_rate(NULL, "clkin", NULL, 0, freq); - pr_debug("clkin @%u MHz\n", freq / 1000000); + rate = (val >> 8) & 3; + if (val & CLKIN_25MHZ_EN) { + clkin = 25000000; + hpll = hpll_rates[1][rate]; + } else if (val & AST2400_CLK_SOURCE_SEL) { + clkin = 48000000; + hpll = hpll_rates[0][rate]; + } else { + clkin = 24000000; + hpll = hpll_rates[0][rate]; + } + hw = clk_hw_register_fixed_rate(NULL, "clkin", NULL, 0, clkin); + pr_debug("clkin @%u MHz\n", clkin / 1000000); /* * High-speed PLL clock derived from the crystal. This the CPU clock, - * and we assume that it is enabled + * and we assume that it is enabled. It can be configured through the + * HPLL_PARAM register, or set to a specified frequency by strapping. */ regmap_read(map, ASPEED_HPLL_PARAM, &val); - WARN(val & AST2400_HPLL_STRAPPED, "hpll is strapped not configured"); - aspeed_clk_data->hws[ASPEED_CLK_HPLL] = aspeed_ast2400_calc_pll("hpll", val); + if (val & AST2400_HPLL_PROGRAMMED) + hw = aspeed_ast2400_calc_pll("hpll", val); + else + hw = clk_hw_register_fixed_rate(NULL, "hpll", "clkin", 0, + hpll * 1000000); + + aspeed_clk_data->hws[ASPEED_CLK_HPLL] = hw; /* * Strap bits 11:10 define the CPU/AHB clock frequency ratio (aka HCLK) -- cgit v1.2.3 From 93312b6da4df31e4102ce5420e6217135a16c7ea Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Wed, 11 Jul 2018 10:42:20 -0700 Subject: ARC: mm: allow mprotect to make stack mappings executable mprotect(EXEC) was failing for stack mappings as default vm flags was missing MAYEXEC. This was triggered by glibc test suite nptl/tst-execstack testcase What is surprising is that despite running LTP for years on, we didn't catch this issue as it lacks a directed test case. gcc dejagnu tests with nested functions also requiring exec stack work fine though because they rely on the GNU_STACK segment spit out by compiler and handled in kernel elf loader. This glibc case is different as the stack is non exec to begin with and a dlopen of shared lib with GNU_STACK segment triggers the exec stack proceedings using a mprotect(PROT_EXEC) which was broken. CC: stable@vger.kernel.org Signed-off-by: Vineet Gupta --- arch/arc/include/asm/page.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arc/include/asm/page.h b/arch/arc/include/asm/page.h index 109baa06831c..09ddddf71cc5 100644 --- a/arch/arc/include/asm/page.h +++ b/arch/arc/include/asm/page.h @@ -105,7 +105,7 @@ typedef pte_t * pgtable_t; #define virt_addr_valid(kaddr) pfn_valid(virt_to_pfn(kaddr)) /* Default Permissions for stack/heaps pages (Non Executable) */ -#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE) +#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) #define WANT_PAGE_VIRTUAL 1 -- cgit v1.2.3 From 61d769807f273fda962866f3d4c677cda9974d3c Mon Sep 17 00:00:00 2001 From: Mathieu Xhonneux Date: Tue, 10 Jul 2018 16:54:02 +0000 Subject: bpf: fix availability probing for seg6 helpers bpf_lwt_seg6_* helpers require CONFIG_IPV6_SEG6_BPF, and currently return -EOPNOTSUPP to indicate unavailability. This patch forces the BPF verifier to reject programs using these helpers when !CONFIG_IPV6_SEG6_BPF, allowing users to more easily probe if they are available or not. Signed-off-by: Mathieu Xhonneux Signed-off-by: Daniel Borkmann --- net/core/filter.c | 23 ++++++++--------------- 1 file changed, 8 insertions(+), 15 deletions(-) diff --git a/net/core/filter.c b/net/core/filter.c index a13f5b1f1636..06da770f543f 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -4536,10 +4536,10 @@ static const struct bpf_func_proto bpf_lwt_push_encap_proto = { .arg4_type = ARG_CONST_SIZE }; +#if IS_ENABLED(CONFIG_IPV6_SEG6_BPF) BPF_CALL_4(bpf_lwt_seg6_store_bytes, struct sk_buff *, skb, u32, offset, const void *, from, u32, len) { -#if IS_ENABLED(CONFIG_IPV6_SEG6_BPF) struct seg6_bpf_srh_state *srh_state = this_cpu_ptr(&seg6_bpf_srh_states); void *srh_tlvs, *srh_end, *ptr; @@ -4565,9 +4565,6 @@ BPF_CALL_4(bpf_lwt_seg6_store_bytes, struct sk_buff *, skb, u32, offset, memcpy(skb->data + offset, from, len); return 0; -#else /* CONFIG_IPV6_SEG6_BPF */ - return -EOPNOTSUPP; -#endif } static const struct bpf_func_proto bpf_lwt_seg6_store_bytes_proto = { @@ -4583,7 +4580,6 @@ static const struct bpf_func_proto bpf_lwt_seg6_store_bytes_proto = { BPF_CALL_4(bpf_lwt_seg6_action, struct sk_buff *, skb, u32, action, void *, param, u32, param_len) { -#if IS_ENABLED(CONFIG_IPV6_SEG6_BPF) struct seg6_bpf_srh_state *srh_state = this_cpu_ptr(&seg6_bpf_srh_states); struct ipv6_sr_hdr *srh; @@ -4631,9 +4627,6 @@ BPF_CALL_4(bpf_lwt_seg6_action, struct sk_buff *, skb, default: return -EINVAL; } -#else /* CONFIG_IPV6_SEG6_BPF */ - return -EOPNOTSUPP; -#endif } static const struct bpf_func_proto bpf_lwt_seg6_action_proto = { @@ -4649,7 +4642,6 @@ static const struct bpf_func_proto bpf_lwt_seg6_action_proto = { BPF_CALL_3(bpf_lwt_seg6_adjust_srh, struct sk_buff *, skb, u32, offset, s32, len) { -#if IS_ENABLED(CONFIG_IPV6_SEG6_BPF) struct seg6_bpf_srh_state *srh_state = this_cpu_ptr(&seg6_bpf_srh_states); void *srh_end, *srh_tlvs, *ptr; @@ -4693,9 +4685,6 @@ BPF_CALL_3(bpf_lwt_seg6_adjust_srh, struct sk_buff *, skb, u32, offset, srh_state->hdrlen += len; srh_state->valid = 0; return 0; -#else /* CONFIG_IPV6_SEG6_BPF */ - return -EOPNOTSUPP; -#endif } static const struct bpf_func_proto bpf_lwt_seg6_adjust_srh_proto = { @@ -4706,6 +4695,7 @@ static const struct bpf_func_proto bpf_lwt_seg6_adjust_srh_proto = { .arg2_type = ARG_ANYTHING, .arg3_type = ARG_ANYTHING, }; +#endif /* CONFIG_IPV6_SEG6_BPF */ bool bpf_helper_changes_pkt_data(void *func) { @@ -4727,11 +4717,12 @@ bool bpf_helper_changes_pkt_data(void *func) func == bpf_xdp_adjust_meta || func == bpf_msg_pull_data || func == bpf_xdp_adjust_tail || - func == bpf_lwt_push_encap || +#if IS_ENABLED(CONFIG_IPV6_SEG6_BPF) func == bpf_lwt_seg6_store_bytes || func == bpf_lwt_seg6_adjust_srh || - func == bpf_lwt_seg6_action - ) + func == bpf_lwt_seg6_action || +#endif + func == bpf_lwt_push_encap) return true; return false; @@ -5066,12 +5057,14 @@ static const struct bpf_func_proto * lwt_seg6local_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog) { switch (func_id) { +#if IS_ENABLED(CONFIG_IPV6_SEG6_BPF) case BPF_FUNC_lwt_seg6_store_bytes: return &bpf_lwt_seg6_store_bytes_proto; case BPF_FUNC_lwt_seg6_action: return &bpf_lwt_seg6_action_proto; case BPF_FUNC_lwt_seg6_adjust_srh: return &bpf_lwt_seg6_adjust_srh_proto; +#endif default: return lwt_out_func_proto(func_id, prog); } -- cgit v1.2.3 From b65f370d0671c4980ffe866c41e327b88893245c Mon Sep 17 00:00:00 2001 From: Okash Khawaja Date: Tue, 10 Jul 2018 14:33:07 -0700 Subject: bpf: btf: Fix bitfield extraction for big endian When extracting bitfield from a number, btf_int_bits_seq_show() builds a mask and accesses least significant byte of the number in a way specific to little-endian. This patch fixes that by checking endianness of the machine and then shifting left and right the unneeded bits. Thanks to Martin Lau for the help in navigating potential pitfalls when dealing with endianess and for the final solution. Fixes: b00b8daec828 ("bpf: btf: Add pretty print capability for data with BTF type info") Signed-off-by: Okash Khawaja Acked-by: Martin KaFai Lau Signed-off-by: Daniel Borkmann --- kernel/bpf/btf.c | 30 +++++++++++++----------------- 1 file changed, 13 insertions(+), 17 deletions(-) diff --git a/kernel/bpf/btf.c b/kernel/bpf/btf.c index 2d49d18b793a..e016ac3afa24 100644 --- a/kernel/bpf/btf.c +++ b/kernel/bpf/btf.c @@ -991,16 +991,13 @@ static void btf_int_bits_seq_show(const struct btf *btf, void *data, u8 bits_offset, struct seq_file *m) { + u16 left_shift_bits, right_shift_bits; u32 int_data = btf_type_int(t); u16 nr_bits = BTF_INT_BITS(int_data); u16 total_bits_offset; u16 nr_copy_bytes; u16 nr_copy_bits; - u8 nr_upper_bits; - union { - u64 u64_num; - u8 u8_nums[8]; - } print_num; + u64 print_num; total_bits_offset = bits_offset + BTF_INT_OFFSET(int_data); data += BITS_ROUNDDOWN_BYTES(total_bits_offset); @@ -1008,21 +1005,20 @@ static void btf_int_bits_seq_show(const struct btf *btf, nr_copy_bits = nr_bits + bits_offset; nr_copy_bytes = BITS_ROUNDUP_BYTES(nr_copy_bits); - print_num.u64_num = 0; - memcpy(&print_num.u64_num, data, nr_copy_bytes); + print_num = 0; + memcpy(&print_num, data, nr_copy_bytes); - /* Ditch the higher order bits */ - nr_upper_bits = BITS_PER_BYTE_MASKED(nr_copy_bits); - if (nr_upper_bits) { - /* We need to mask out some bits of the upper byte. */ - u8 mask = (1 << nr_upper_bits) - 1; +#ifdef __BIG_ENDIAN_BITFIELD + left_shift_bits = bits_offset; +#else + left_shift_bits = BITS_PER_U64 - nr_copy_bits; +#endif + right_shift_bits = BITS_PER_U64 - nr_bits; - print_num.u8_nums[nr_copy_bytes - 1] &= mask; - } - - print_num.u64_num >>= bits_offset; + print_num <<= left_shift_bits; + print_num >>= right_shift_bits; - seq_printf(m, "0x%llx", print_num.u64_num); + seq_printf(m, "0x%llx", print_num); } static void btf_int_seq_show(const struct btf *btf, const struct btf_type *t, -- cgit v1.2.3 From 6e6fddc78323533be570873abb728b7e0ba7e024 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Wed, 11 Jul 2018 15:30:14 +0200 Subject: bpf: fix panic due to oob in bpf_prog_test_run_skb sykzaller triggered several panics similar to the below: [...] [ 248.851531] BUG: KASAN: use-after-free in _copy_to_user+0x5c/0x90 [ 248.857656] Read of size 985 at addr ffff8808017ffff2 by task a.out/1425 [...] [ 248.865902] CPU: 1 PID: 1425 Comm: a.out Not tainted 4.18.0-rc4+ #13 [ 248.865903] Hardware name: Supermicro SYS-5039MS-H12TRF/X11SSE-F, BIOS 2.1a 03/08/2018 [ 248.865905] Call Trace: [ 248.865910] dump_stack+0xd6/0x185 [ 248.865911] ? show_regs_print_info+0xb/0xb [ 248.865913] ? printk+0x9c/0xc3 [ 248.865915] ? kmsg_dump_rewind_nolock+0xe4/0xe4 [ 248.865919] print_address_description+0x6f/0x270 [ 248.865920] kasan_report+0x25b/0x380 [ 248.865922] ? _copy_to_user+0x5c/0x90 [ 248.865924] check_memory_region+0x137/0x190 [ 248.865925] kasan_check_read+0x11/0x20 [ 248.865927] _copy_to_user+0x5c/0x90 [ 248.865930] bpf_test_finish.isra.8+0x4f/0xc0 [ 248.865932] bpf_prog_test_run_skb+0x6a0/0xba0 [...] After scrubbing the BPF prog a bit from the noise, turns out it called bpf_skb_change_head() for the lwt_xmit prog with headroom of 2. Nothing wrong in that, however, this was run with repeat >> 0 in bpf_prog_test_run_skb() and the same skb thus keeps changing until the pskb_expand_head() called from skb_cow() keeps bailing out in atomic alloc context with -ENOMEM. So upon return we'll basically have 0 headroom left yet blindly do the __skb_push() of 14 bytes and keep copying data from there in bpf_test_finish() out of bounds. Fix to check if we have enough headroom and if pskb_expand_head() fails, bail out with error. Another bug independent of this fix (but related in triggering above) is that BPF_PROG_TEST_RUN should be reworked to reset the skb/xdp buffer to it's original state from input as otherwise repeating the same test in a loop won't work for benchmarking when underlying input buffer is getting changed by the prog each time and reused for the next run leading to unexpected results. Fixes: 1cf1cae963c2 ("bpf: introduce BPF_PROG_TEST_RUN command") Reported-by: syzbot+709412e651e55ed96498@syzkaller.appspotmail.com Reported-by: syzbot+54f39d6ab58f39720a55@syzkaller.appspotmail.com Signed-off-by: Daniel Borkmann Signed-off-by: Alexei Starovoitov --- net/bpf/test_run.c | 17 ++++++++++++++--- tools/testing/selftests/bpf/test_verifier.c | 23 ++++++++++++++++++++++- 2 files changed, 36 insertions(+), 4 deletions(-) diff --git a/net/bpf/test_run.c b/net/bpf/test_run.c index 68c3578343b4..22a78eedf4b1 100644 --- a/net/bpf/test_run.c +++ b/net/bpf/test_run.c @@ -96,6 +96,7 @@ int bpf_prog_test_run_skb(struct bpf_prog *prog, const union bpf_attr *kattr, u32 size = kattr->test.data_size_in; u32 repeat = kattr->test.repeat; u32 retval, duration; + int hh_len = ETH_HLEN; struct sk_buff *skb; void *data; int ret; @@ -131,12 +132,22 @@ int bpf_prog_test_run_skb(struct bpf_prog *prog, const union bpf_attr *kattr, skb_reset_network_header(skb); if (is_l2) - __skb_push(skb, ETH_HLEN); + __skb_push(skb, hh_len); if (is_direct_pkt_access) bpf_compute_data_pointers(skb); retval = bpf_test_run(prog, skb, repeat, &duration); - if (!is_l2) - __skb_push(skb, ETH_HLEN); + if (!is_l2) { + if (skb_headroom(skb) < hh_len) { + int nhead = HH_DATA_ALIGN(hh_len - skb_headroom(skb)); + + if (pskb_expand_head(skb, nhead, 0, GFP_USER)) { + kfree_skb(skb); + return -ENOMEM; + } + } + memset(__skb_push(skb, hh_len), 0, hh_len); + } + size = skb->len; /* bpf program can never convert linear skb to non-linear */ if (WARN_ON_ONCE(skb_is_nonlinear(skb))) diff --git a/tools/testing/selftests/bpf/test_verifier.c b/tools/testing/selftests/bpf/test_verifier.c index 2ecd27b670d7..f5f7bcc96046 100644 --- a/tools/testing/selftests/bpf/test_verifier.c +++ b/tools/testing/selftests/bpf/test_verifier.c @@ -4974,6 +4974,24 @@ static struct bpf_test tests[] = { .result = ACCEPT, .prog_type = BPF_PROG_TYPE_LWT_XMIT, }, + { + "make headroom for LWT_XMIT", + .insns = { + BPF_MOV64_REG(BPF_REG_6, BPF_REG_1), + BPF_MOV64_IMM(BPF_REG_2, 34), + BPF_MOV64_IMM(BPF_REG_3, 0), + BPF_EMIT_CALL(BPF_FUNC_skb_change_head), + /* split for s390 to succeed */ + BPF_MOV64_REG(BPF_REG_1, BPF_REG_6), + BPF_MOV64_IMM(BPF_REG_2, 42), + BPF_MOV64_IMM(BPF_REG_3, 0), + BPF_EMIT_CALL(BPF_FUNC_skb_change_head), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .result = ACCEPT, + .prog_type = BPF_PROG_TYPE_LWT_XMIT, + }, { "invalid access of tc_classid for LWT_IN", .insns = { @@ -12554,8 +12572,11 @@ static void do_test_single(struct bpf_test *test, bool unpriv, } if (fd_prog >= 0) { + __u8 tmp[TEST_DATA_LEN << 2]; + __u32 size_tmp = sizeof(tmp); + err = bpf_prog_test_run(fd_prog, 1, test->data, - sizeof(test->data), NULL, NULL, + sizeof(test->data), tmp, &size_tmp, &retval, NULL); if (err && errno != 524/*ENOTSUPP*/ && errno != EPERM) { printf("Unexpected bpf_prog_test_run error\n"); -- cgit v1.2.3 From f20a4c46b984331a509528fa2b84125c617ef98b Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 10 Jul 2018 12:05:31 +0100 Subject: sfp: ensure we clean up properly on bus registration failure We fail to correctly clean up after a bus registration failure, which can lead to an incorrect assumption about the registration state of the upstream or sfp cage. Signed-off-by: Russell King Signed-off-by: David S. Miller --- drivers/net/phy/sfp-bus.c | 31 ++++++++++++++++++++++++------- 1 file changed, 24 insertions(+), 7 deletions(-) diff --git a/drivers/net/phy/sfp-bus.c b/drivers/net/phy/sfp-bus.c index d437f4f5ed52..36af5e8267fe 100644 --- a/drivers/net/phy/sfp-bus.c +++ b/drivers/net/phy/sfp-bus.c @@ -436,6 +436,13 @@ void sfp_upstream_stop(struct sfp_bus *bus) } EXPORT_SYMBOL_GPL(sfp_upstream_stop); +static void sfp_upstream_clear(struct sfp_bus *bus) +{ + bus->upstream_ops = NULL; + bus->upstream = NULL; + bus->netdev = NULL; +} + /** * sfp_register_upstream() - Register the neighbouring device * @fwnode: firmware node for the SFP bus @@ -462,8 +469,11 @@ struct sfp_bus *sfp_register_upstream(struct fwnode_handle *fwnode, bus->upstream = upstream; bus->netdev = ndev; - if (bus->sfp) + if (bus->sfp) { ret = sfp_register_bus(bus); + if (ret) + sfp_upstream_clear(bus); + } rtnl_unlock(); } @@ -488,8 +498,7 @@ void sfp_unregister_upstream(struct sfp_bus *bus) rtnl_lock(); if (bus->sfp) sfp_unregister_bus(bus); - bus->upstream = NULL; - bus->netdev = NULL; + sfp_upstream_clear(bus); rtnl_unlock(); sfp_bus_put(bus); @@ -561,6 +570,13 @@ void sfp_module_remove(struct sfp_bus *bus) } EXPORT_SYMBOL_GPL(sfp_module_remove); +static void sfp_socket_clear(struct sfp_bus *bus) +{ + bus->sfp_dev = NULL; + bus->sfp = NULL; + bus->socket_ops = NULL; +} + struct sfp_bus *sfp_register_socket(struct device *dev, struct sfp *sfp, const struct sfp_socket_ops *ops) { @@ -573,8 +589,11 @@ struct sfp_bus *sfp_register_socket(struct device *dev, struct sfp *sfp, bus->sfp = sfp; bus->socket_ops = ops; - if (bus->netdev) + if (bus->netdev) { ret = sfp_register_bus(bus); + if (ret) + sfp_socket_clear(bus); + } rtnl_unlock(); } @@ -592,9 +611,7 @@ void sfp_unregister_socket(struct sfp_bus *bus) rtnl_lock(); if (bus->netdev) sfp_unregister_bus(bus); - bus->sfp_dev = NULL; - bus->sfp = NULL; - bus->socket_ops = NULL; + sfp_socket_clear(bus); rtnl_unlock(); sfp_bus_put(bus); -- cgit v1.2.3 From 576cd32082351620a4e76b8babc4d5ae9b4bbb98 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 10 Jul 2018 12:05:36 +0100 Subject: sfp: fix module initialisation with netdev already up It was been observed that with a particular order of initialisation, the netdev can be up, but the SFP module still has its TX_DISABLE signal asserted. This occurs when the network device brought up before the SFP kernel module has been inserted by userspace. This occurs because sfp-bus layer does not hear about the change in network device state, and so assumes that it is still down. Set netdev->sfp when the upstream is registered to work around this problem. Signed-off-by: Russell King Signed-off-by: David S. Miller --- drivers/net/phy/sfp-bus.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/phy/sfp-bus.c b/drivers/net/phy/sfp-bus.c index 36af5e8267fe..740655261e5b 100644 --- a/drivers/net/phy/sfp-bus.c +++ b/drivers/net/phy/sfp-bus.c @@ -349,7 +349,6 @@ static int sfp_register_bus(struct sfp_bus *bus) } if (bus->started) bus->socket_ops->start(bus->sfp); - bus->netdev->sfp_bus = bus; bus->registered = true; return 0; } @@ -364,7 +363,6 @@ static void sfp_unregister_bus(struct sfp_bus *bus) if (bus->phydev && ops && ops->disconnect_phy) ops->disconnect_phy(bus->upstream); } - bus->netdev->sfp_bus = NULL; bus->registered = false; } @@ -440,6 +438,7 @@ static void sfp_upstream_clear(struct sfp_bus *bus) { bus->upstream_ops = NULL; bus->upstream = NULL; + bus->netdev->sfp_bus = NULL; bus->netdev = NULL; } @@ -468,6 +467,7 @@ struct sfp_bus *sfp_register_upstream(struct fwnode_handle *fwnode, bus->upstream_ops = ops; bus->upstream = upstream; bus->netdev = ndev; + ndev->sfp_bus = bus; if (bus->sfp) { ret = sfp_register_bus(bus); -- cgit v1.2.3 From b6e44b4c74ef75f729f0147d43d189173fe463c9 Mon Sep 17 00:00:00 2001 From: Keith Busch Date: Wed, 11 Jul 2018 16:44:44 -0600 Subject: nvme-pci: fix memory leak on probe failure The nvme driver specific structures need to be initialized prior to enabling the generic controller so we can unwind on failure with out using the reference counting callbacks so that 'probe' and 'remove' can be symmetric. The newly added iod_mempool is the only resource that was being allocated out of order, and a failure there would leak the generic controller memory. This patch just moves that allocation above the controller initialization. Fixes: 943e942e6266f ("nvme-pci: limit max IO size and segments to avoid high order allocations") Reported-by: Weiping Zhang Signed-off-by: Keith Busch Signed-off-by: Christoph Hellwig --- drivers/nvme/host/pci.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index ba943f211687..ddd441b1516a 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -2556,11 +2556,6 @@ static int nvme_probe(struct pci_dev *pdev, const struct pci_device_id *id) quirks |= check_vendor_combination_bug(pdev); - result = nvme_init_ctrl(&dev->ctrl, &pdev->dev, &nvme_pci_ctrl_ops, - quirks); - if (result) - goto release_pools; - /* * Double check that our mempool alloc size will cover the biggest * command we support. @@ -2578,6 +2573,11 @@ static int nvme_probe(struct pci_dev *pdev, const struct pci_device_id *id) goto release_pools; } + result = nvme_init_ctrl(&dev->ctrl, &pdev->dev, &nvme_pci_ctrl_ops, + quirks); + if (result) + goto release_mempool; + dev_info(dev->ctrl.device, "pci function %s\n", dev_name(&pdev->dev)); nvme_get_ctrl(&dev->ctrl); @@ -2585,6 +2585,8 @@ static int nvme_probe(struct pci_dev *pdev, const struct pci_device_id *id) return 0; + release_mempool: + mempool_destroy(dev->iod_mempool); release_pools: nvme_release_prp_pools(dev); unmap: -- cgit v1.2.3 From 20c4515a1af770f4fb0dc6b044ffc9a6031e5767 Mon Sep 17 00:00:00 2001 From: "Ewan D. Milne" Date: Tue, 10 Jul 2018 10:27:24 -0400 Subject: qed: fix spelling mistake "successffuly" -> "successfully" Trivial fix to spelling mistake in qed_probe message. Signed-off-by: Ewan D. Milne Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_main.c b/drivers/net/ethernet/qlogic/qed/qed_main.c index 0cbc74d6ca8b..758a9a5127fa 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_main.c +++ b/drivers/net/ethernet/qlogic/qed/qed_main.c @@ -371,7 +371,7 @@ static struct qed_dev *qed_probe(struct pci_dev *pdev, goto err2; } - DP_INFO(cdev, "qed_probe completed successffuly\n"); + DP_INFO(cdev, "qed_probe completed successfully\n"); return cdev; -- cgit v1.2.3 From d14c780c11fbc10f66c43e7b64eefe87ca442bd3 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Mon, 18 Jun 2018 12:02:00 -0400 Subject: ixgbe: Be more careful when modifying MAC filters This change makes it so that we are much more explicit about the ordering of updates to the receive address register (RAR) table. Prior to this patch I believe we may have been updating the table while entries were still active, or possibly allowing for reordering of things since we weren't explicitly flushing writes to either the lower or upper portion of the register prior to accessing the other half. Signed-off-by: Alexander Duyck Reviewed-by: Shannon Nelson Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_common.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c index 3f5c350716bb..0bd1294ba517 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c @@ -1871,7 +1871,12 @@ s32 ixgbe_set_rar_generic(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq, if (enable_addr != 0) rar_high |= IXGBE_RAH_AV; + /* Record lower 32 bits of MAC address and then make + * sure that write is flushed to hardware before writing + * the upper 16 bits and setting the valid bit. + */ IXGBE_WRITE_REG(hw, IXGBE_RAL(index), rar_low); + IXGBE_WRITE_FLUSH(hw); IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high); return 0; @@ -1903,8 +1908,13 @@ s32 ixgbe_clear_rar_generic(struct ixgbe_hw *hw, u32 index) rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index)); rar_high &= ~(0x0000FFFF | IXGBE_RAH_AV); - IXGBE_WRITE_REG(hw, IXGBE_RAL(index), 0); + /* Clear the address valid bit and upper 16 bits of the address + * before clearing the lower bits. This way we aren't updating + * a live filter. + */ IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high); + IXGBE_WRITE_FLUSH(hw); + IXGBE_WRITE_REG(hw, IXGBE_RAL(index), 0); /* clear VMDq pool/queue selection for this RAR */ hw->mac.ops.clear_vmdq(hw, index, IXGBE_CLEAR_VMDQ_ALL); -- cgit v1.2.3 From d89d01f2232b90e8024ae07ff5ab213521875448 Mon Sep 17 00:00:00 2001 From: Harry Wentland Date: Thu, 12 Jul 2018 10:23:21 -0400 Subject: drm/amd/display: Convert 10kHz clks from PPLib into kHz for Vega MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The driver is expecting clock frequency in kHz, while SMU returns the values in 10kHz, which causes the bandwidth validation to fail 4.18 has the faulty clock assignment in pp_to_dc_clock_levels_with_latency only, which is only used by Vega. Make sure we multiply these values by 10 here, as we do for other ASICs as powerplay assigned them wrong. 4.19 has the proper fix in powerplay. v2: Add Fixes tag v3: Fixes -> Bugzilla, with simplified link Bugzilla: https://bugs.freedesktop.org/107082 Signed-off-by: Mikita Lipski Signed-off-by: Harry Wentland Acked-by: Michel Dänzer Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_services.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_services.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_services.c index 5a3346124a01..5a2e952c5bea 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_services.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_services.c @@ -255,8 +255,9 @@ static void pp_to_dc_clock_levels_with_latency( DC_DECODE_PP_CLOCK_TYPE(dc_clk_type)); for (i = 0; i < clk_level_info->num_levels; i++) { - DRM_DEBUG("DM_PPLIB:\t %d\n", pp_clks->data[i].clocks_in_khz); - clk_level_info->data[i].clocks_in_khz = pp_clks->data[i].clocks_in_khz; + DRM_DEBUG("DM_PPLIB:\t %d in 10kHz\n", pp_clks->data[i].clocks_in_khz); + /* translate 10kHz to kHz */ + clk_level_info->data[i].clocks_in_khz = pp_clks->data[i].clocks_in_khz * 10; clk_level_info->data[i].latency_in_us = pp_clks->data[i].latency_in_us; } } -- cgit v1.2.3 From 8d4235f71513cdccd9dc52b674323c3591552bc1 Mon Sep 17 00:00:00 2001 From: David Francis Date: Thu, 12 Jul 2018 10:07:49 -0400 Subject: amd/dc/dce100: On dce100, set clocks to 0 on suspend [Why] When a dce100 asic was suspended, the clocks were not set to 0. Upon resume, the new clock was compared to the existing clock, they were found to be the same, and so the clock was not set. This resulted in a pernicious blackscreen. [How] In atomic commit, check to see if there are any active pipes. If no, set clocks to 0 Signed-off-by: David Francis Signed-off-by: Alex Deucher --- .../gpu/drm/amd/display/dc/dce100/dce100_resource.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/dce100/dce100_resource.c b/drivers/gpu/drm/amd/display/dc/dce100/dce100_resource.c index 38ec0d609297..344dd2e69e7c 100644 --- a/drivers/gpu/drm/amd/display/dc/dce100/dce100_resource.c +++ b/drivers/gpu/drm/amd/display/dc/dce100/dce100_resource.c @@ -678,9 +678,22 @@ bool dce100_validate_bandwidth( struct dc *dc, struct dc_state *context) { - /* TODO implement when needed but for now hardcode max value*/ - context->bw.dce.dispclk_khz = 681000; - context->bw.dce.yclk_khz = 250000 * MEMORY_TYPE_MULTIPLIER; + int i; + bool at_least_one_pipe = false; + + for (i = 0; i < dc->res_pool->pipe_count; i++) { + if (context->res_ctx.pipe_ctx[i].stream) + at_least_one_pipe = true; + } + + if (at_least_one_pipe) { + /* TODO implement when needed but for now hardcode max value*/ + context->bw.dce.dispclk_khz = 681000; + context->bw.dce.yclk_khz = 250000 * MEMORY_TYPE_MULTIPLIER; + } else { + context->bw.dce.dispclk_khz = 0; + context->bw.dce.yclk_khz = 0; + } return true; } -- cgit v1.2.3 From c411104115e6821f26fc8f6de8b235ddf98de688 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 4 Jul 2018 12:53:37 +0300 Subject: ixgbe: Off by one in ixgbe_ipsec_tx() The ipsec->tx_tbl[] has IXGBE_IPSEC_MAX_SA_COUNT elements so the > needs to be changed to >= so we don't read one element beyond the end of the array. Fixes: 592594704761 ("ixgbe: process the Tx ipsec offload") Signed-off-by: Dan Carpenter Acked-by: Shannon Nelson Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c index c116f459945d..da4322e4daed 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c @@ -839,7 +839,7 @@ int ixgbe_ipsec_tx(struct ixgbe_ring *tx_ring, } itd->sa_idx = xs->xso.offload_handle - IXGBE_IPSEC_BASE_TX_INDEX; - if (unlikely(itd->sa_idx > IXGBE_IPSEC_MAX_SA_COUNT)) { + if (unlikely(itd->sa_idx >= IXGBE_IPSEC_MAX_SA_COUNT)) { netdev_err(tx_ring->netdev, "%s: bad sa_idx=%d handle=%lu\n", __func__, itd->sa_idx, xs->xso.offload_handle); return 0; -- cgit v1.2.3 From b203cc7a4fc94b373f6b0d4418e5e30f15645bf9 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 26 Jun 2018 06:49:09 -0300 Subject: networking: e100.rst: Get rid of Sphinx warnings Documentation/networking/e100.rst:57: WARNING: Literal block expected; none found. Documentation/networking/e100.rst:68: WARNING: Literal block expected; none found. Documentation/networking/e100.rst:75: WARNING: Literal block expected; none found. Documentation/networking/e100.rst:84: WARNING: Literal block expected; none found. Documentation/networking/e100.rst:93: WARNING: Inline emphasis start-string without end-string. While here, fix some highlights. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Jeff Kirsher --- Documentation/networking/e100.rst | 27 +++++++++++++++++---------- 1 file changed, 17 insertions(+), 10 deletions(-) diff --git a/Documentation/networking/e100.rst b/Documentation/networking/e100.rst index 9708f5fa76de..f81111eba9c5 100644 --- a/Documentation/networking/e100.rst +++ b/Documentation/networking/e100.rst @@ -47,41 +47,45 @@ Driver Configuration Parameters The default value for each parameter is generally the recommended setting, unless otherwise noted. -Rx Descriptors: Number of receive descriptors. A receive descriptor is a data +Rx Descriptors: + Number of receive descriptors. A receive descriptor is a data structure that describes a receive buffer and its attributes to the network controller. The data in the descriptor is used by the controller to write data from the controller to host memory. In the 3.x.x driver the valid range for this parameter is 64-256. The default value is 256. This parameter can be changed using the command:: - ethtool -G eth? rx n + ethtool -G eth? rx n Where n is the number of desired Rx descriptors. -Tx Descriptors: Number of transmit descriptors. A transmit descriptor is a data +Tx Descriptors: + Number of transmit descriptors. A transmit descriptor is a data structure that describes a transmit buffer and its attributes to the network controller. The data in the descriptor is used by the controller to read data from the host memory to the controller. In the 3.x.x driver the valid range for this parameter is 64-256. The default value is 128. This parameter can be changed using the command:: - ethtool -G eth? tx n + ethtool -G eth? tx n Where n is the number of desired Tx descriptors. -Speed/Duplex: The driver auto-negotiates the link speed and duplex settings by +Speed/Duplex: + The driver auto-negotiates the link speed and duplex settings by default. The ethtool utility can be used as follows to force speed/duplex.:: - ethtool -s eth? autoneg off speed {10|100} duplex {full|half} + ethtool -s eth? autoneg off speed {10|100} duplex {full|half} NOTE: setting the speed/duplex to incorrect values will cause the link to fail. -Event Log Message Level: The driver uses the message level flag to log events +Event Log Message Level: + The driver uses the message level flag to log events to syslog. The message level can be set at driver load time. It can also be set using the command:: - ethtool -s eth? msglvl n + ethtool -s eth? msglvl n Additional Configurations @@ -92,7 +96,7 @@ Configuring the Driver on Different Distributions Configuring a network driver to load properly when the system is started is distribution dependent. Typically, the configuration process involves -adding an alias line to /etc/modprobe.d/*.conf as well as editing other +adding an alias line to `/etc/modprobe.d/*.conf` as well as editing other system startup scripts and/or configuration files. Many popular Linux distributions ship with tools to make these changes for you. To learn the proper way to configure a network device for your system, refer to @@ -160,7 +164,10 @@ This results in unbalanced receive traffic. If you have multiple interfaces in a server, either turn on ARP filtering by -(1) entering:: echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter +(1) entering:: + + echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter + (this only works if your kernel's version is higher than 2.4.5), or (2) installing the interfaces in separate broadcast domains (either -- cgit v1.2.3 From 8dc4b1a799fbf4e21ea014076284ee73bb4f9443 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 26 Jun 2018 06:49:10 -0300 Subject: networking: e1000.rst: Get rid of Sphinx warnings Documentation/networking/e1000.rst:83: ERROR: Unexpected indentation. Documentation/networking/e1000.rst:84: WARNING: Block quote ends without a blank line; unexpected unindent. Documentation/networking/e1000.rst:173: WARNING: Definition list ends without a blank line; unexpected unindent. Documentation/networking/e1000.rst:236: WARNING: Definition list ends without a blank line; unexpected unindent. While here, fix highlights and mark a table as such. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Jeff Kirsher --- Documentation/networking/e1000.rst | 187 ++++++++++++++++++++++--------------- 1 file changed, 112 insertions(+), 75 deletions(-) diff --git a/Documentation/networking/e1000.rst b/Documentation/networking/e1000.rst index 144b87eef153..f10dd4086921 100644 --- a/Documentation/networking/e1000.rst +++ b/Documentation/networking/e1000.rst @@ -34,7 +34,8 @@ Command Line Parameters The default value for each parameter is generally the recommended setting, unless otherwise noted. -NOTES: For more information about the AutoNeg, Duplex, and Speed +NOTES: + For more information about the AutoNeg, Duplex, and Speed parameters, see the "Speed and Duplex Configuration" section in this document. @@ -45,22 +46,27 @@ NOTES: For more information about the AutoNeg, Duplex, and Speed AutoNeg ------- + (Supported only on adapters with copper connections) -Valid Range: 0x01-0x0F, 0x20-0x2F -Default Value: 0x2F + +:Valid Range: 0x01-0x0F, 0x20-0x2F +:Default Value: 0x2F This parameter is a bit-mask that specifies the speed and duplex settings advertised by the adapter. When this parameter is used, the Speed and Duplex parameters must not be specified. -NOTE: Refer to the Speed and Duplex section of this readme for more +NOTE: + Refer to the Speed and Duplex section of this readme for more information on the AutoNeg parameter. Duplex ------ + (Supported only on adapters with copper connections) -Valid Range: 0-2 (0=auto-negotiate, 1=half, 2=full) -Default Value: 0 + +:Valid Range: 0-2 (0=auto-negotiate, 1=half, 2=full) +:Default Value: 0 This defines the direction in which data is allowed to flow. Can be either one or two-directional. If both Duplex and the link partner are @@ -70,18 +76,22 @@ duplex. FlowControl ----------- -Valid Range: 0-3 (0=none, 1=Rx only, 2=Tx only, 3=Rx&Tx) -Default Value: Reads flow control settings from the EEPROM + +:Valid Range: 0-3 (0=none, 1=Rx only, 2=Tx only, 3=Rx&Tx) +:Default Value: Reads flow control settings from the EEPROM This parameter controls the automatic generation(Tx) and response(Rx) to Ethernet PAUSE frames. InterruptThrottleRate --------------------- + (not supported on Intel(R) 82542, 82543 or 82544-based adapters) -Valid Range: 0,1,3,4,100-100000 (0=off, 1=dynamic, 3=dynamic conservative, - 4=simplified balancing) -Default Value: 3 + +:Valid Range: + 0,1,3,4,100-100000 (0=off, 1=dynamic, 3=dynamic conservative, + 4=simplified balancing) +:Default Value: 3 The driver can limit the amount of interrupts per second that the adapter will generate for incoming packets. It does this by writing a value to the @@ -135,13 +145,15 @@ Setting InterruptThrottleRate to 0 turns off any interrupt moderation and may improve small packet latency, but is generally not suitable for bulk throughput traffic. -NOTE: InterruptThrottleRate takes precedence over the TxAbsIntDelay and +NOTE: + InterruptThrottleRate takes precedence over the TxAbsIntDelay and RxAbsIntDelay parameters. In other words, minimizing the receive and/or transmit absolute delays does not force the controller to generate more interrupts than what the Interrupt Throttle Rate allows. -CAUTION: If you are using the Intel(R) PRO/1000 CT Network Connection +CAUTION: + If you are using the Intel(R) PRO/1000 CT Network Connection (controller 82547), setting InterruptThrottleRate to a value greater than 75,000, may hang (stop transmitting) adapters under certain network conditions. If this occurs a NETDEV @@ -151,7 +163,8 @@ CAUTION: If you are using the Intel(R) PRO/1000 CT Network Connection hang, ensure that InterruptThrottleRate is set no greater than 75,000 and is not set to 0. -NOTE: When e1000 is loaded with default settings and multiple adapters +NOTE: + When e1000 is loaded with default settings and multiple adapters are in use simultaneously, the CPU utilization may increase non- linearly. In order to limit the CPU utilization without impacting the overall throughput, we recommend that you load the driver as @@ -168,9 +181,11 @@ NOTE: When e1000 is loaded with default settings and multiple adapters RxDescriptors ------------- -Valid Range: 48-256 for 82542 and 82543-based adapters - 48-4096 for all other supported adapters -Default Value: 256 + +:Valid Range: + - 48-256 for 82542 and 82543-based adapters + - 48-4096 for all other supported adapters +:Default Value: 256 This value specifies the number of receive buffer descriptors allocated by the driver. Increasing this value allows the driver to buffer more @@ -180,15 +195,17 @@ Each descriptor is 16 bytes. A receive buffer is also allocated for each descriptor and can be either 2048, 4096, 8192, or 16384 bytes, depending on the MTU setting. The maximum MTU size is 16110. -NOTE: MTU designates the frame size. It only needs to be set for Jumbo +NOTE: + MTU designates the frame size. It only needs to be set for Jumbo Frames. Depending on the available system resources, the request for a higher number of receive descriptors may be denied. In this case, use a lower number. RxIntDelay ---------- -Valid Range: 0-65535 (0=off) -Default Value: 0 + +:Valid Range: 0-65535 (0=off) +:Default Value: 0 This value delays the generation of receive interrupts in units of 1.024 microseconds. Receive interrupt reduction can improve CPU efficiency if @@ -198,7 +215,8 @@ of TCP traffic. If the system is reporting dropped receives, this value may be set too high, causing the driver to run out of available receive descriptors. -CAUTION: When setting RxIntDelay to a value other than 0, adapters may +CAUTION: + When setting RxIntDelay to a value other than 0, adapters may hang (stop transmitting) under certain network conditions. If this occurs a NETDEV WATCHDOG message is logged in the system event log. In addition, the controller is automatically reset, @@ -207,9 +225,11 @@ CAUTION: When setting RxIntDelay to a value other than 0, adapters may RxAbsIntDelay ------------- + (This parameter is supported only on 82540, 82545 and later adapters.) -Valid Range: 0-65535 (0=off) -Default Value: 128 + +:Valid Range: 0-65535 (0=off) +:Default Value: 128 This value, in units of 1.024 microseconds, limits the delay in which a receive interrupt is generated. Useful only if RxIntDelay is non-zero, @@ -220,9 +240,11 @@ conditions. Speed ----- + (This parameter is supported only on adapters with copper connections.) -Valid Settings: 0, 10, 100, 1000 -Default Value: 0 (auto-negotiate at all supported speeds) + +:Valid Settings: 0, 10, 100, 1000 +:Default Value: 0 (auto-negotiate at all supported speeds) Speed forces the line speed to the specified value in megabits per second (Mbps). If this parameter is not specified or is set to 0 and the link @@ -231,22 +253,26 @@ speed. Duplex should also be set when Speed is set to either 10 or 100. TxDescriptors ------------- -Valid Range: 48-256 for 82542 and 82543-based adapters - 48-4096 for all other supported adapters -Default Value: 256 + +:Valid Range: + - 48-256 for 82542 and 82543-based adapters + - 48-4096 for all other supported adapters +:Default Value: 256 This value is the number of transmit descriptors allocated by the driver. Increasing this value allows the driver to queue more transmits. Each descriptor is 16 bytes. -NOTE: Depending on the available system resources, the request for a +NOTE: + Depending on the available system resources, the request for a higher number of transmit descriptors may be denied. In this case, use a lower number. TxIntDelay ---------- -Valid Range: 0-65535 (0=off) -Default Value: 8 + +:Valid Range: 0-65535 (0=off) +:Default Value: 8 This value delays the generation of transmit interrupts in units of 1.024 microseconds. Transmit interrupt reduction can improve CPU @@ -256,9 +282,11 @@ causing the driver to run out of available transmit descriptors. TxAbsIntDelay ------------- + (This parameter is supported only on 82540, 82545 and later adapters.) -Valid Range: 0-65535 (0=off) -Default Value: 32 + +:Valid Range: 0-65535 (0=off) +:Default Value: 32 This value, in units of 1.024 microseconds, limits the delay in which a transmit interrupt is generated. Useful only if TxIntDelay is non-zero, @@ -269,18 +297,21 @@ network conditions. XsumRX ------ + (This parameter is NOT supported on the 82542-based adapter.) -Valid Range: 0-1 -Default Value: 1 + +:Valid Range: 0-1 +:Default Value: 1 A value of '1' indicates that the driver should enable IP checksum offload for received packets (both UDP and TCP) to the adapter hardware. Copybreak --------- -Valid Range: 0-xxxxxxx (0=off) -Default Value: 256 -Usage: modprobe e1000.ko copybreak=128 + +:Valid Range: 0-xxxxxxx (0=off) +:Default Value: 256 +:Usage: modprobe e1000.ko copybreak=128 Driver copies all packets below or equaling this size to a fresh RX buffer before handing it up the stack. @@ -292,8 +323,9 @@ it is also available during runtime at SmartPowerDownEnable -------------------- -Valid Range: 0-1 -Default Value: 0 (disabled) + +:Valid Range: 0-1 +:Default Value: 0 (disabled) Allows PHY to turn off in lower power states. The user can turn off this parameter in supported chipsets. @@ -309,14 +341,14 @@ fiber interface board only links at 1000 Mbps full-duplex. For copper-based boards, the keywords interact as follows: - The default operation is auto-negotiate. The board advertises all +- The default operation is auto-negotiate. The board advertises all supported speed and duplex combinations, and it links at the highest common speed and duplex mode IF the link partner is set to auto-negotiate. - If Speed = 1000, limited auto-negotiation is enabled and only 1000 Mbps +- If Speed = 1000, limited auto-negotiation is enabled and only 1000 Mbps is advertised (The 1000BaseT spec requires auto-negotiation.) - If Speed = 10 or 100, then both Speed and Duplex should be set. Auto- +- If Speed = 10 or 100, then both Speed and Duplex should be set. Auto- negotiation is disabled, and the AutoNeg parameter is ignored. Partner SHOULD also be forced. @@ -328,13 +360,15 @@ process. The parameter may be specified as either a decimal or hexadecimal value as determined by the bitmap below. +============== ====== ====== ======= ======= ====== ====== ======= ====== Bit position 7 6 5 4 3 2 1 0 Decimal Value 128 64 32 16 8 4 2 1 Hex value 80 40 20 10 8 4 2 1 Speed (Mbps) N/A N/A 1000 N/A 100 100 10 10 Duplex Full Full Half Full Half +============== ====== ====== ======= ======= ====== ====== ======= ====== -Some examples of using AutoNeg: +Some examples of using AutoNeg:: modprobe e1000 AutoNeg=0x01 (Restricts autonegotiation to 10 Half) modprobe e1000 AutoNeg=1 (Same as above) @@ -357,56 +391,59 @@ Additional Configurations Jumbo Frames ------------ -Jumbo Frames support is enabled by changing the MTU to a value larger -than the default of 1500. Use the ifconfig command to increase the MTU -size. For example:: + + Jumbo Frames support is enabled by changing the MTU to a value larger than + the default of 1500. Use the ifconfig command to increase the MTU size. + For example:: ifconfig eth mtu 9000 up -This setting is not saved across reboots. It can be made permanent if -you add:: + This setting is not saved across reboots. It can be made permanent if + you add:: MTU=9000 -to the file /etc/sysconfig/network-scripts/ifcfg-eth. This example -applies to the Red Hat distributions; other distributions may store this -setting in a different location. + to the file /etc/sysconfig/network-scripts/ifcfg-eth. This example + applies to the Red Hat distributions; other distributions may store this + setting in a different location. + +Notes: + Degradation in throughput performance may be observed in some Jumbo frames + environments. If this is observed, increasing the application's socket buffer + size and/or increasing the /proc/sys/net/ipv4/tcp_*mem entry values may help. + See the specific application manual and /usr/src/linux*/Documentation/ + networking/ip-sysctl.txt for more details. -Notes: Degradation in throughput performance may be observed in some -Jumbo frames environments. If this is observed, increasing the -application's socket buffer size and/or increasing the -/proc/sys/net/ipv4/tcp_*mem entry values may help. See the specific -application manual and /usr/src/linux*/Documentation/ -networking/ip-sysctl.txt for more details. + - The maximum MTU setting for Jumbo Frames is 16110. This value coincides + with the maximum Jumbo Frames size of 16128. -- The maximum MTU setting for Jumbo Frames is 16110. This value - coincides with the maximum Jumbo Frames size of 16128. + - Using Jumbo frames at 10 or 100 Mbps is not supported and may result in + poor performance or loss of link. -- Using Jumbo frames at 10 or 100 Mbps is not supported and may result - in poor performance or loss of link. + - Adapters based on the Intel(R) 82542 and 82573V/E controller do not + support Jumbo Frames. These correspond to the following product names:: -- Adapters based on the Intel(R) 82542 and 82573V/E controller do not - support Jumbo Frames. These correspond to the following product names: - Intel(R) PRO/1000 Gigabit Server Adapter Intel(R) PRO/1000 PM Network - Connection + Intel(R) PRO/1000 Gigabit Server Adapter + Intel(R) PRO/1000 PM Network Connection ethtool ------- -The driver utilizes the ethtool interface for driver configuration and -diagnostics, as well as displaying statistical information. The ethtool -version 1.6 or later is required for this functionality. -The latest release of ethtool can be found from -https://www.kernel.org/pub/software/network/ethtool/ + The driver utilizes the ethtool interface for driver configuration and + diagnostics, as well as displaying statistical information. The ethtool + version 1.6 or later is required for this functionality. + + The latest release of ethtool can be found from + https://www.kernel.org/pub/software/network/ethtool/ Enabling Wake on LAN* (WoL) --------------------------- -WoL is configured through the ethtool* utility. -WoL will be enabled on the system during the next shut down or reboot. -For this driver version, in order to enable WoL, the e1000 driver must be -loaded when shutting down or rebooting the system. + WoL is configured through the ethtool* utility. + WoL will be enabled on the system during the next shut down or reboot. + For this driver version, in order to enable WoL, the e1000 driver must be + loaded when shutting down or rebooting the system. Support ======= -- cgit v1.2.3 From 83fe6b8709f65bc505b10235bd82ece12c4c5099 Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Tue, 10 Jul 2018 14:22:27 -0700 Subject: sch_fq_codel: zero q->flows_cnt when fq_codel_init fails When fq_codel_init fails, qdisc_create_dflt will cleanup by using qdisc_destroy. This function calls the ->reset() op prior to calling the ->destroy() op. Unfortunately, during the failure flow for sch_fq_codel, the ->flows parameter is not initialized, so the fq_codel_reset function will null pointer dereference. kernel: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 kernel: IP: fq_codel_reset+0x58/0xd0 [sch_fq_codel] kernel: PGD 0 P4D 0 kernel: Oops: 0000 [#1] SMP PTI kernel: Modules linked in: i40iw i40e(OE) xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack tun bridge stp llc devlink ebtable_filter ebtables ip6table_filter ip6_tables rpcrdma ib_isert iscsi_target_mod sunrpc ib_iser libiscsi scsi_transport_iscsi ib_srpt target_core_mod ib_srp scsi_transport_srp ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm intel_rapl sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel intel_cstate iTCO_wdt iTCO_vendor_support intel_uncore ib_core intel_rapl_perf mei_me mei joydev i2c_i801 lpc_ich ioatdma shpchp wmi sch_fq_codel xfs libcrc32c mgag200 ixgbe drm_kms_helper isci ttm firewire_ohci kernel: mdio drm igb libsas crc32c_intel firewire_core ptp pps_core scsi_transport_sas crc_itu_t dca i2c_algo_bit ipmi_si ipmi_devintf ipmi_msghandler [last unloaded: i40e] kernel: CPU: 10 PID: 4219 Comm: ip Tainted: G OE 4.16.13custom-fq-codel-test+ #3 kernel: Hardware name: Intel Corporation S2600CO/S2600CO, BIOS SE5C600.86B.02.05.0004.051120151007 05/11/2015 kernel: RIP: 0010:fq_codel_reset+0x58/0xd0 [sch_fq_codel] kernel: RSP: 0018:ffffbfbf4c1fb620 EFLAGS: 00010246 kernel: RAX: 0000000000000400 RBX: 0000000000000000 RCX: 00000000000005b9 kernel: RDX: 0000000000000000 RSI: ffff9d03264a60c0 RDI: ffff9cfd17b31c00 kernel: RBP: 0000000000000001 R08: 00000000000260c0 R09: ffffffffb679c3e9 kernel: R10: fffff1dab06a0e80 R11: ffff9cfd163af800 R12: ffff9cfd17b31c00 kernel: R13: 0000000000000001 R14: ffff9cfd153de600 R15: 0000000000000001 kernel: FS: 00007fdec2f92800(0000) GS:ffff9d0326480000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 0000000000000008 CR3: 0000000c1956a006 CR4: 00000000000606e0 kernel: Call Trace: kernel: qdisc_destroy+0x56/0x140 kernel: qdisc_create_dflt+0x8b/0xb0 kernel: mq_init+0xc1/0xf0 kernel: qdisc_create_dflt+0x5a/0xb0 kernel: dev_activate+0x205/0x230 kernel: __dev_open+0xf5/0x160 kernel: __dev_change_flags+0x1a3/0x210 kernel: dev_change_flags+0x21/0x60 kernel: do_setlink+0x660/0xdf0 kernel: ? down_trylock+0x25/0x30 kernel: ? xfs_buf_trylock+0x1a/0xd0 [xfs] kernel: ? rtnl_newlink+0x816/0x990 kernel: ? _xfs_buf_find+0x327/0x580 [xfs] kernel: ? _cond_resched+0x15/0x30 kernel: ? kmem_cache_alloc+0x20/0x1b0 kernel: ? rtnetlink_rcv_msg+0x200/0x2f0 kernel: ? rtnl_calcit.isra.30+0x100/0x100 kernel: ? netlink_rcv_skb+0x4c/0x120 kernel: ? netlink_unicast+0x19e/0x260 kernel: ? netlink_sendmsg+0x1ff/0x3c0 kernel: ? sock_sendmsg+0x36/0x40 kernel: ? ___sys_sendmsg+0x295/0x2f0 kernel: ? ebitmap_cmp+0x6d/0x90 kernel: ? dev_get_by_name_rcu+0x73/0x90 kernel: ? skb_dequeue+0x52/0x60 kernel: ? __inode_wait_for_writeback+0x7f/0xf0 kernel: ? bit_waitqueue+0x30/0x30 kernel: ? fsnotify_grab_connector+0x3c/0x60 kernel: ? __sys_sendmsg+0x51/0x90 kernel: ? do_syscall_64+0x74/0x180 kernel: ? entry_SYSCALL_64_after_hwframe+0x3d/0xa2 kernel: Code: 00 00 48 89 87 00 02 00 00 8b 87 a0 01 00 00 85 c0 0f 84 84 00 00 00 31 ed 48 63 dd 83 c5 01 48 c1 e3 06 49 03 9c 24 90 01 00 00 <48> 8b 73 08 48 8b 3b e8 6c 9a 4f f6 48 8d 43 10 48 c7 03 00 00 kernel: RIP: fq_codel_reset+0x58/0xd0 [sch_fq_codel] RSP: ffffbfbf4c1fb620 kernel: CR2: 0000000000000008 kernel: ---[ end trace e81a62bede66274e ]--- This is caused because flows_cnt is non-zero, but flows hasn't been initialized. fq_codel_init has left the private data in a partially initialized state. To fix this, reset flows_cnt to 0 when we fail to initialize. Additionally, to make the state more consistent, also cleanup the flows pointer when the allocation of backlogs fails. This fixes the NULL pointer dereference, since both the for-loop and memset in fq_codel_reset will be no-ops when flow_cnt is zero. Signed-off-by: Jacob Keller Signed-off-by: David S. Miller --- net/sched/sch_fq_codel.c | 25 ++++++++++++++++++------- 1 file changed, 18 insertions(+), 7 deletions(-) diff --git a/net/sched/sch_fq_codel.c b/net/sched/sch_fq_codel.c index cd2e0e342fb6..6c0a9d5dbf94 100644 --- a/net/sched/sch_fq_codel.c +++ b/net/sched/sch_fq_codel.c @@ -479,24 +479,28 @@ static int fq_codel_init(struct Qdisc *sch, struct nlattr *opt, q->cparams.mtu = psched_mtu(qdisc_dev(sch)); if (opt) { - int err = fq_codel_change(sch, opt, extack); + err = fq_codel_change(sch, opt, extack); if (err) - return err; + goto init_failure; } err = tcf_block_get(&q->block, &q->filter_list, sch, extack); if (err) - return err; + goto init_failure; if (!q->flows) { q->flows = kvcalloc(q->flows_cnt, sizeof(struct fq_codel_flow), GFP_KERNEL); - if (!q->flows) - return -ENOMEM; + if (!q->flows) { + err = -ENOMEM; + goto init_failure; + } q->backlogs = kvcalloc(q->flows_cnt, sizeof(u32), GFP_KERNEL); - if (!q->backlogs) - return -ENOMEM; + if (!q->backlogs) { + err = -ENOMEM; + goto alloc_failure; + } for (i = 0; i < q->flows_cnt; i++) { struct fq_codel_flow *flow = q->flows + i; @@ -509,6 +513,13 @@ static int fq_codel_init(struct Qdisc *sch, struct nlattr *opt, else sch->flags &= ~TCQ_F_CAN_BYPASS; return 0; + +alloc_failure: + kvfree(q->flows); + q->flows = NULL; +init_failure: + q->flows_cnt = 0; + return err; } static int fq_codel_dump(struct Qdisc *sch, struct sk_buff *skb) -- cgit v1.2.3 From c7a897843224a92209f306c984975b704969b89d Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Thu, 12 Jul 2018 21:44:28 +0200 Subject: bpf: don't leave partial mangled prog in jit_subprogs error path syzkaller managed to trigger the following bug through fault injection: [...] [ 141.043668] verifier bug. No program starts at insn 3 [ 141.044648] WARNING: CPU: 3 PID: 4072 at kernel/bpf/verifier.c:1613 get_callee_stack_depth kernel/bpf/verifier.c:1612 [inline] [ 141.044648] WARNING: CPU: 3 PID: 4072 at kernel/bpf/verifier.c:1613 fixup_call_args kernel/bpf/verifier.c:5587 [inline] [ 141.044648] WARNING: CPU: 3 PID: 4072 at kernel/bpf/verifier.c:1613 bpf_check+0x525e/0x5e60 kernel/bpf/verifier.c:5952 [ 141.047355] CPU: 3 PID: 4072 Comm: a.out Not tainted 4.18.0-rc4+ #51 [ 141.048446] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),BIOS 1.10.2-1 04/01/2014 [ 141.049877] Call Trace: [ 141.050324] __dump_stack lib/dump_stack.c:77 [inline] [ 141.050324] dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113 [ 141.050950] ? dump_stack_print_info.cold.2+0x52/0x52 lib/dump_stack.c:60 [ 141.051837] panic+0x238/0x4e7 kernel/panic.c:184 [ 141.052386] ? add_taint.cold.5+0x16/0x16 kernel/panic.c:385 [ 141.053101] ? __warn.cold.8+0x148/0x1ba kernel/panic.c:537 [ 141.053814] ? __warn.cold.8+0x117/0x1ba kernel/panic.c:530 [ 141.054506] ? get_callee_stack_depth kernel/bpf/verifier.c:1612 [inline] [ 141.054506] ? fixup_call_args kernel/bpf/verifier.c:5587 [inline] [ 141.054506] ? bpf_check+0x525e/0x5e60 kernel/bpf/verifier.c:5952 [ 141.055163] __warn.cold.8+0x163/0x1ba kernel/panic.c:538 [ 141.055820] ? get_callee_stack_depth kernel/bpf/verifier.c:1612 [inline] [ 141.055820] ? fixup_call_args kernel/bpf/verifier.c:5587 [inline] [ 141.055820] ? bpf_check+0x525e/0x5e60 kernel/bpf/verifier.c:5952 [...] What happens in jit_subprogs() is that kcalloc() for the subprog func buffer is failing with NULL where we then bail out. Latter is a plain return -ENOMEM, and this is definitely not okay since earlier in the loop we are walking all subprogs and temporarily rewrite insn->off to remember the subprog id as well as insn->imm to temporarily point the call to __bpf_call_base + 1 for the initial JIT pass. Thus, bailing out in such state and handing this over to the interpreter is troublesome since later/subsequent e.g. find_subprog() lookups are based on wrong insn->imm. Therefore, once we hit this point, we need to jump to out_free path where we undo all changes from earlier loop, so that interpreter can work on unmodified insn->{off,imm}. Another point is that should find_subprog() fail in jit_subprogs() due to a verifier bug, then we also should not simply defer the program to the interpreter since also here we did partial modifications. Instead we should just bail out entirely and return an error to the user who is trying to load the program. Fixes: 1c2a088a6626 ("bpf: x64: add JIT support for multi-function programs") Reported-by: syzbot+7d427828b2ea6e592804@syzkaller.appspotmail.com Signed-off-by: Daniel Borkmann Signed-off-by: Alexei Starovoitov --- kernel/bpf/verifier.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index 9e2bf834f13a..63aaac52a265 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -5430,6 +5430,10 @@ static int jit_subprogs(struct bpf_verifier_env *env) if (insn->code != (BPF_JMP | BPF_CALL) || insn->src_reg != BPF_PSEUDO_CALL) continue; + /* Upon error here we cannot fall back to interpreter but + * need a hard reject of the program. Thus -EFAULT is + * propagated in any case. + */ subprog = find_subprog(env, i + insn->imm + 1); if (subprog < 0) { WARN_ONCE(1, "verifier bug. No program starts at insn %d\n", @@ -5450,7 +5454,7 @@ static int jit_subprogs(struct bpf_verifier_env *env) func = kcalloc(env->subprog_cnt, sizeof(prog), GFP_KERNEL); if (!func) - return -ENOMEM; + goto out_undo_insn; for (i = 0; i < env->subprog_cnt; i++) { subprog_start = subprog_end; @@ -5515,7 +5519,7 @@ static int jit_subprogs(struct bpf_verifier_env *env) tmp = bpf_int_jit_compile(func[i]); if (tmp != func[i] || func[i]->bpf_func != old_bpf_func) { verbose(env, "JIT doesn't support bpf-to-bpf calls\n"); - err = -EFAULT; + err = -ENOTSUPP; goto out_free; } cond_resched(); @@ -5552,6 +5556,7 @@ out_free: if (func[i]) bpf_jit_free(func[i]); kfree(func); +out_undo_insn: /* cleanup main prog to be interpreted */ prog->jit_requested = 0; for (i = 0, insn = prog->insnsi; i < prog->len; i++, insn++) { @@ -5578,6 +5583,8 @@ static int fixup_call_args(struct bpf_verifier_env *env) err = jit_subprogs(env); if (err == 0) return 0; + if (err == -EFAULT) + return err; } #ifndef CONFIG_BPF_JIT_ALWAYS_ON for (i = 0; i < prog->len; i++, insn++) { -- cgit v1.2.3 From 21684dc46c598e477707487c009f9773f7c0382d Mon Sep 17 00:00:00 2001 From: Stefan Baranoff Date: Tue, 10 Jul 2018 17:25:20 -0400 Subject: tcp: fix sequence numbers for repaired sockets re-using TIME-WAIT sockets This patch fixes a bug where the sequence numbers of a socket created using TCP repair functionality are lower than set after connect is called. This occurs when the repair socket overlaps with a TIME-WAIT socket and triggers the re-use code. The amount lower is equal to the number of times that a particular IP/port set is re-used and then put back into TIME-WAIT. Re-using the first time the sequence number is 1 lower, closing that socket and then re-opening (with repair) a new socket with the same addresses/ports puts the sequence number 2 lower than set via setsockopt. The third time is 3 lower, etc. I have not tested what the limit of this acrewal is, if any. The fix is, if a socket is in repair mode, to respect the already set sequence number and timestamp when it would have already re-used the TIME-WAIT socket. Signed-off-by: Stefan Baranoff Signed-off-by: David S. Miller --- net/ipv4/tcp_ipv4.c | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-) diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index bea17f1e8302..3b2711e33e4c 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -156,11 +156,24 @@ int tcp_twsk_unique(struct sock *sk, struct sock *sktw, void *twp) */ if (tcptw->tw_ts_recent_stamp && (!twp || (reuse && get_seconds() - tcptw->tw_ts_recent_stamp > 1))) { - tp->write_seq = tcptw->tw_snd_nxt + 65535 + 2; - if (tp->write_seq == 0) - tp->write_seq = 1; - tp->rx_opt.ts_recent = tcptw->tw_ts_recent; - tp->rx_opt.ts_recent_stamp = tcptw->tw_ts_recent_stamp; + /* In case of repair and re-using TIME-WAIT sockets we still + * want to be sure that it is safe as above but honor the + * sequence numbers and time stamps set as part of the repair + * process. + * + * Without this check re-using a TIME-WAIT socket with TCP + * repair would accumulate a -1 on the repair assigned + * sequence number. The first time it is reused the sequence + * is -1, the second time -2, etc. This fixes that issue + * without appearing to create any others. + */ + if (likely(!tp->repair)) { + tp->write_seq = tcptw->tw_snd_nxt + 65535 + 2; + if (tp->write_seq == 0) + tp->write_seq = 1; + tp->rx_opt.ts_recent = tcptw->tw_ts_recent; + tp->rx_opt.ts_recent_stamp = tcptw->tw_ts_recent_stamp; + } sock_hold(sktw); return 1; } -- cgit v1.2.3 From 70b7ff130224d2d22a158c7f4aa5e7fb1c95949d Mon Sep 17 00:00:00 2001 From: Stefan Baranoff Date: Tue, 10 Jul 2018 17:31:10 -0400 Subject: tcp: allow user to create repair socket without window probes Under rare conditions where repair code may be used it is possible that window probes are either unnecessary or undesired. If the user knows that window probes are not wanted or needed this change allows them to skip sending them when a socket comes out of repair. Signed-off-by: Stefan Baranoff Signed-off-by: David S. Miller --- net/ipv4/tcp.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 0d43705dd001..8e5e2ca9ab1b 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -2823,14 +2823,16 @@ static int do_tcp_setsockopt(struct sock *sk, int level, case TCP_REPAIR: if (!tcp_can_repair_sock(sk)) err = -EPERM; - else if (val == 1) { - tp->repair = 1; + /* 1 for normal repair, 2 for no window probes */ + else if (val == 1 || val == 2) { + tp->repair = val; sk->sk_reuse = SK_FORCE_REUSE; tp->repair_queue = TCP_NO_QUEUE; } else if (val == 0) { tp->repair = 0; sk->sk_reuse = SK_NO_REUSE; - tcp_send_window_probe(sk); + if (tp->repair == 1) + tcp_send_window_probe(sk); } else err = -EINVAL; -- cgit v1.2.3 From 9e3bff923913729d76d87f0015848ee7b8ff7083 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 11 Jul 2018 02:47:58 -0700 Subject: net: systemport: Fix CRC forwarding check for SYSTEMPORT Lite SYSTEMPORT Lite reversed the logic compared to SYSTEMPORT, the GIB_FCS_STRIP bit is set when the Ethernet FCS is stripped, and that bit is not set by default. Fix the logic such that we properly check whether that bit is set or not and we don't forward an extra 4 bytes to the network stack. Fixes: 44a4524c54af ("net: systemport: Add support for SYSTEMPORT Lite") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bcmsysport.c | 4 ++-- drivers/net/ethernet/broadcom/bcmsysport.h | 3 ++- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c index d5fca2e5a9bc..a1f60f89e059 100644 --- a/drivers/net/ethernet/broadcom/bcmsysport.c +++ b/drivers/net/ethernet/broadcom/bcmsysport.c @@ -1946,8 +1946,8 @@ static int bcm_sysport_open(struct net_device *dev) if (!priv->is_lite) priv->crc_fwd = !!(umac_readl(priv, UMAC_CMD) & CMD_CRC_FWD); else - priv->crc_fwd = !!(gib_readl(priv, GIB_CONTROL) & - GIB_FCS_STRIP); + priv->crc_fwd = !((gib_readl(priv, GIB_CONTROL) & + GIB_FCS_STRIP) >> GIB_FCS_STRIP_SHIFT); phydev = of_phy_connect(dev, priv->phy_dn, bcm_sysport_adj_link, 0, priv->phy_interface); diff --git a/drivers/net/ethernet/broadcom/bcmsysport.h b/drivers/net/ethernet/broadcom/bcmsysport.h index d6e5d0cbf3a3..cf440b91fd04 100644 --- a/drivers/net/ethernet/broadcom/bcmsysport.h +++ b/drivers/net/ethernet/broadcom/bcmsysport.h @@ -278,7 +278,8 @@ struct bcm_rsb { #define GIB_GTX_CLK_EXT_CLK (0 << GIB_GTX_CLK_SEL_SHIFT) #define GIB_GTX_CLK_125MHZ (1 << GIB_GTX_CLK_SEL_SHIFT) #define GIB_GTX_CLK_250MHZ (2 << GIB_GTX_CLK_SEL_SHIFT) -#define GIB_FCS_STRIP (1 << 6) +#define GIB_FCS_STRIP_SHIFT 6 +#define GIB_FCS_STRIP (1 << GIB_FCS_STRIP_SHIFT) #define GIB_LCL_LOOP_EN (1 << 7) #define GIB_LCL_LOOP_TXEN (1 << 8) #define GIB_RMT_LOOP_EN (1 << 9) -- cgit v1.2.3 From 1c56c0994a533ce564843a0d17af7a3e6e68f269 Mon Sep 17 00:00:00 2001 From: Bert Kenward Date: Wed, 11 Jul 2018 11:44:25 +0100 Subject: sfc: avoid hang from nested use of the filter_sem In some situations we may end up calling down_read while already holding the semaphore for write, thus hanging. This has been seen when setting the MAC address for the interface. The hung task log in this situation includes this stack: down_read efx_ef10_filter_insert efx_ef10_filter_insert_addr_list efx_ef10_filter_vlan_sync_rx_mode efx_ef10_filter_add_vlan efx_ef10_filter_table_probe efx_ef10_set_mac_address efx_set_mac_address dev_set_mac_address In addition, lockdep rightly points out that nested calling of down_read is incorrect. Fixes: c2bebe37c6b6 ("sfc: give ef10 its own rwsem in the filter table instead of filter_lock") Tested-by: Jarod Wilson Signed-off-by: Bert Kenward Signed-off-by: David S. Miller --- drivers/net/ethernet/sfc/ef10.c | 30 +++++++++++++++++++++--------- 1 file changed, 21 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/sfc/ef10.c b/drivers/net/ethernet/sfc/ef10.c index 23f0785c0573..7eeac3d6cfe8 100644 --- a/drivers/net/ethernet/sfc/ef10.c +++ b/drivers/net/ethernet/sfc/ef10.c @@ -4288,9 +4288,9 @@ static int efx_ef10_filter_pri(struct efx_ef10_filter_table *table, return -EPROTONOSUPPORT; } -static s32 efx_ef10_filter_insert(struct efx_nic *efx, - struct efx_filter_spec *spec, - bool replace_equal) +static s32 efx_ef10_filter_insert_locked(struct efx_nic *efx, + struct efx_filter_spec *spec, + bool replace_equal) { DECLARE_BITMAP(mc_rem_map, EFX_EF10_FILTER_SEARCH_LIMIT); struct efx_ef10_nic_data *nic_data = efx->nic_data; @@ -4307,7 +4307,7 @@ static s32 efx_ef10_filter_insert(struct efx_nic *efx, bool is_mc_recip; s32 rc; - down_read(&efx->filter_sem); + WARN_ON(!rwsem_is_locked(&efx->filter_sem)); table = efx->filter_state; down_write(&table->lock); @@ -4498,10 +4498,22 @@ out_unlock: if (rss_locked) mutex_unlock(&efx->rss_lock); up_write(&table->lock); - up_read(&efx->filter_sem); return rc; } +static s32 efx_ef10_filter_insert(struct efx_nic *efx, + struct efx_filter_spec *spec, + bool replace_equal) +{ + s32 ret; + + down_read(&efx->filter_sem); + ret = efx_ef10_filter_insert_locked(efx, spec, replace_equal); + up_read(&efx->filter_sem); + + return ret; +} + static void efx_ef10_filter_update_rx_scatter(struct efx_nic *efx) { /* no need to do anything here on EF10 */ @@ -5285,7 +5297,7 @@ static int efx_ef10_filter_insert_addr_list(struct efx_nic *efx, EFX_WARN_ON_PARANOID(ids[i] != EFX_EF10_FILTER_ID_INVALID); efx_filter_init_rx(&spec, EFX_FILTER_PRI_AUTO, filter_flags, 0); efx_filter_set_eth_local(&spec, vlan->vid, addr_list[i].addr); - rc = efx_ef10_filter_insert(efx, &spec, true); + rc = efx_ef10_filter_insert_locked(efx, &spec, true); if (rc < 0) { if (rollback) { netif_info(efx, drv, efx->net_dev, @@ -5314,7 +5326,7 @@ static int efx_ef10_filter_insert_addr_list(struct efx_nic *efx, efx_filter_init_rx(&spec, EFX_FILTER_PRI_AUTO, filter_flags, 0); eth_broadcast_addr(baddr); efx_filter_set_eth_local(&spec, vlan->vid, baddr); - rc = efx_ef10_filter_insert(efx, &spec, true); + rc = efx_ef10_filter_insert_locked(efx, &spec, true); if (rc < 0) { netif_warn(efx, drv, efx->net_dev, "Broadcast filter insert failed rc=%d\n", rc); @@ -5370,7 +5382,7 @@ static int efx_ef10_filter_insert_def(struct efx_nic *efx, if (vlan->vid != EFX_FILTER_VID_UNSPEC) efx_filter_set_eth_local(&spec, vlan->vid, NULL); - rc = efx_ef10_filter_insert(efx, &spec, true); + rc = efx_ef10_filter_insert_locked(efx, &spec, true); if (rc < 0) { const char *um = multicast ? "Multicast" : "Unicast"; const char *encap_name = ""; @@ -5430,7 +5442,7 @@ static int efx_ef10_filter_insert_def(struct efx_nic *efx, filter_flags, 0); eth_broadcast_addr(baddr); efx_filter_set_eth_local(&spec, vlan->vid, baddr); - rc = efx_ef10_filter_insert(efx, &spec, true); + rc = efx_ef10_filter_insert_locked(efx, &spec, true); if (rc < 0) { netif_warn(efx, drv, efx->net_dev, "Broadcast filter insert failed rc=%d\n", -- cgit v1.2.3 From 193f20033c54db0dc9563f722fbafbcd5fa0e80d Mon Sep 17 00:00:00 2001 From: Bert Kenward Date: Wed, 11 Jul 2018 11:45:10 +0100 Subject: sfc: hold filter_sem consistently during reset We should take and release the filter_sem consistently during the reset process, in the same manner as the mac_lock and reset_lock. For lockdep consistency we also take the filter_sem for write around other calls to efx->type->init(). Fixes: c2bebe37c6b6 ("sfc: give ef10 its own rwsem in the filter table instead of filter_lock") Signed-off-by: Bert Kenward Signed-off-by: David S. Miller --- drivers/net/ethernet/sfc/efx.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/sfc/efx.c b/drivers/net/ethernet/sfc/efx.c index 570ec72266f3..ce3a177081a8 100644 --- a/drivers/net/ethernet/sfc/efx.c +++ b/drivers/net/ethernet/sfc/efx.c @@ -1871,12 +1871,6 @@ static void efx_remove_filters(struct efx_nic *efx) up_write(&efx->filter_sem); } -static void efx_restore_filters(struct efx_nic *efx) -{ - down_read(&efx->filter_sem); - efx->type->filter_table_restore(efx); - up_read(&efx->filter_sem); -} /************************************************************************** * @@ -2688,6 +2682,7 @@ void efx_reset_down(struct efx_nic *efx, enum reset_type method) efx_disable_interrupts(efx); mutex_lock(&efx->mac_lock); + down_write(&efx->filter_sem); mutex_lock(&efx->rss_lock); if (efx->port_initialized && method != RESET_TYPE_INVISIBLE && method != RESET_TYPE_DATAPATH) @@ -2745,9 +2740,8 @@ int efx_reset_up(struct efx_nic *efx, enum reset_type method, bool ok) if (efx->type->rx_restore_rss_contexts) efx->type->rx_restore_rss_contexts(efx); mutex_unlock(&efx->rss_lock); - down_read(&efx->filter_sem); - efx_restore_filters(efx); - up_read(&efx->filter_sem); + efx->type->filter_table_restore(efx); + up_write(&efx->filter_sem); if (efx->type->sriov_reset) efx->type->sriov_reset(efx); @@ -2764,6 +2758,7 @@ fail: efx->port_initialized = false; mutex_unlock(&efx->rss_lock); + up_write(&efx->filter_sem); mutex_unlock(&efx->mac_lock); return rc; @@ -3473,7 +3468,9 @@ static int efx_pci_probe_main(struct efx_nic *efx) efx_init_napi(efx); + down_write(&efx->filter_sem); rc = efx->type->init(efx); + up_write(&efx->filter_sem); if (rc) { netif_err(efx, probe, efx->net_dev, "failed to initialise NIC\n"); @@ -3765,7 +3762,9 @@ static int efx_pm_resume(struct device *dev) rc = efx->type->reset(efx, RESET_TYPE_ALL); if (rc) return rc; + down_write(&efx->filter_sem); rc = efx->type->init(efx); + up_write(&efx->filter_sem); if (rc) return rc; rc = efx_pm_thaw(dev); -- cgit v1.2.3 From 8b7008620b8452728cadead460a36f64ed78c460 Mon Sep 17 00:00:00 2001 From: Stefano Brivio Date: Wed, 11 Jul 2018 14:39:42 +0200 Subject: net: Don't copy pfmemalloc flag in __copy_skb_header() The pfmemalloc flag indicates that the skb was allocated from the PFMEMALLOC reserves, and the flag is currently copied on skb copy and clone. However, an skb copied from an skb flagged with pfmemalloc wasn't necessarily allocated from PFMEMALLOC reserves, and on the other hand an skb allocated that way might be copied from an skb that wasn't. So we should not copy the flag on skb copy, and rather decide whether to allow an skb to be associated with sockets unrelated to page reclaim depending only on how it was allocated. Move the pfmemalloc flag before headers_start[0] using an existing 1-bit hole, so that __copy_skb_header() doesn't copy it. When cloning, we'll now take care of this flag explicitly, contravening to the warning comment of __skb_clone(). While at it, restore the newline usage introduced by commit b19372273164 ("net: reorganize sk_buff for faster __copy_skb_header()") to visually separate bytes used in bitfields after headers_start[0], that was gone after commit a9e419dc7be6 ("netfilter: merge ctinfo into nfct pointer storage area"), and describe the pfmemalloc flag in the kernel-doc structure comment. This doesn't change the size of sk_buff or cacheline boundaries, but consolidates the 15 bits hole before tc_index into a 2 bytes hole before csum, that could now be filled more easily. Reported-by: Patrick Talbert Fixes: c93bdd0e03e8 ("netvm: allow skb allocation to use PFMEMALLOC reserves") Signed-off-by: Stefano Brivio Signed-off-by: David S. Miller --- include/linux/skbuff.h | 10 +++++----- net/core/skbuff.c | 2 ++ 2 files changed, 7 insertions(+), 5 deletions(-) diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 164cdedf6012..610a201126ee 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -630,6 +630,7 @@ typedef unsigned char *sk_buff_data_t; * @hash: the packet hash * @queue_mapping: Queue mapping for multiqueue devices * @xmit_more: More SKBs are pending for this queue + * @pfmemalloc: skbuff was allocated from PFMEMALLOC reserves * @ndisc_nodetype: router type (from link layer) * @ooo_okay: allow the mapping of a socket to a queue to be changed * @l4_hash: indicate hash is a canonical 4-tuple hash over transport @@ -735,7 +736,7 @@ struct sk_buff { peeked:1, head_frag:1, xmit_more:1, - __unused:1; /* one bit hole */ + pfmemalloc:1; /* fields enclosed in headers_start/headers_end are copied * using a single memcpy() in __copy_skb_header() @@ -754,31 +755,30 @@ struct sk_buff { __u8 __pkt_type_offset[0]; __u8 pkt_type:3; - __u8 pfmemalloc:1; __u8 ignore_df:1; - __u8 nf_trace:1; __u8 ip_summed:2; __u8 ooo_okay:1; + __u8 l4_hash:1; __u8 sw_hash:1; __u8 wifi_acked_valid:1; __u8 wifi_acked:1; - __u8 no_fcs:1; /* Indicates the inner headers are valid in the skbuff. */ __u8 encapsulation:1; __u8 encap_hdr_csum:1; __u8 csum_valid:1; + __u8 csum_complete_sw:1; __u8 csum_level:2; __u8 csum_not_inet:1; - __u8 dst_pending_confirm:1; #ifdef CONFIG_IPV6_NDISC_NODETYPE __u8 ndisc_nodetype:2; #endif __u8 ipvs_property:1; + __u8 inner_protocol_type:1; __u8 remcsum_offload:1; #ifdef CONFIG_NET_SWITCHDEV diff --git a/net/core/skbuff.c b/net/core/skbuff.c index eba8dae22c25..4df3164bb5fc 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -858,6 +858,8 @@ static struct sk_buff *__skb_clone(struct sk_buff *n, struct sk_buff *skb) n->cloned = 1; n->nohdr = 0; n->peeked = 0; + if (skb->pfmemalloc) + n->pfmemalloc = 1; n->destructor = NULL; C(tail); C(end); -- cgit v1.2.3 From 8d5a803c6a6ce4ec258e31f76059ea5153ba46ef Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Thu, 12 Jul 2018 19:08:05 -0400 Subject: ext4: check for allocation block validity with block group locked With commit 044e6e3d74a3: "ext4: don't update checksum of new initialized bitmaps" the buffer valid bit will get set without actually setting up the checksum for the allocation bitmap, since the checksum will get calculated once we actually allocate an inode or block. If we are doing this, then we need to (re-)check the verified bit after we take the block group lock. Otherwise, we could race with another process reading and verifying the bitmap, which would then complain about the checksum being invalid. https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1780137 Signed-off-by: Theodore Ts'o Cc: stable@kernel.org --- fs/ext4/balloc.c | 3 +++ fs/ext4/ialloc.c | 3 +++ 2 files changed, 6 insertions(+) diff --git a/fs/ext4/balloc.c b/fs/ext4/balloc.c index e68cefe08261..aa52d87985aa 100644 --- a/fs/ext4/balloc.c +++ b/fs/ext4/balloc.c @@ -368,6 +368,8 @@ static int ext4_validate_block_bitmap(struct super_block *sb, return -EFSCORRUPTED; ext4_lock_group(sb, block_group); + if (buffer_verified(bh)) + goto verified; if (unlikely(!ext4_block_bitmap_csum_verify(sb, block_group, desc, bh))) { ext4_unlock_group(sb, block_group); @@ -386,6 +388,7 @@ static int ext4_validate_block_bitmap(struct super_block *sb, return -EFSCORRUPTED; } set_buffer_verified(bh); +verified: ext4_unlock_group(sb, block_group); return 0; } diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c index fb83750c1a14..e9d8e2667ab5 100644 --- a/fs/ext4/ialloc.c +++ b/fs/ext4/ialloc.c @@ -90,6 +90,8 @@ static int ext4_validate_inode_bitmap(struct super_block *sb, return -EFSCORRUPTED; ext4_lock_group(sb, block_group); + if (buffer_verified(bh)) + goto verified; blk = ext4_inode_bitmap(sb, desc); if (!ext4_inode_bitmap_csum_verify(sb, block_group, desc, bh, EXT4_INODES_PER_GROUP(sb) / 8)) { @@ -101,6 +103,7 @@ static int ext4_validate_inode_bitmap(struct super_block *sb, return -EFSBADCRC; } set_buffer_verified(bh); +verified: ext4_unlock_group(sb, block_group); return 0; } -- cgit v1.2.3 From bab2c80e5a6c855657482eac9e97f5f3eedb509a Mon Sep 17 00:00:00 2001 From: Willem de Bruijn Date: Wed, 11 Jul 2018 12:00:44 -0400 Subject: nsh: set mac len based on inner packet When pulling the NSH header in nsh_gso_segment, set the mac length based on the encapsulated packet type. skb_reset_mac_len computes an offset to the network header, which here still points to the outer packet: > skb_reset_network_header(skb); > [...] > __skb_pull(skb, nsh_len); > skb_reset_mac_header(skb); // now mac hdr starts nsh_len == 8B after net hdr > skb_reset_mac_len(skb); // mac len = net hdr - mac hdr == (u16) -8 == 65528 > [..] > skb_mac_gso_segment(skb, ..) Link: http://lkml.kernel.org/r/CAF=yD-KeAcTSOn4AxirAxL8m7QAS8GBBe1w09eziYwvPbbUeYA@mail.gmail.com Reported-by: syzbot+7b9ed9872dab8c32305d@syzkaller.appspotmail.com Fixes: c411ed854584 ("nsh: add GSO support") Signed-off-by: Willem de Bruijn Acked-by: Jiri Benc Signed-off-by: David S. Miller --- net/nsh/nsh.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/nsh/nsh.c b/net/nsh/nsh.c index 9696ef96b719..1a30e165eeb4 100644 --- a/net/nsh/nsh.c +++ b/net/nsh/nsh.c @@ -104,7 +104,7 @@ static struct sk_buff *nsh_gso_segment(struct sk_buff *skb, __skb_pull(skb, nsh_len); skb_reset_mac_header(skb); - skb_reset_mac_len(skb); + skb->mac_len = proto == htons(ETH_P_TEB) ? ETH_HLEN : 0; skb->protocol = proto; features &= NETIF_F_SG; -- cgit v1.2.3 From 993675a3100b16a4c80dfd70cbcde8ea7127b31d Mon Sep 17 00:00:00 2001 From: Willem de Bruijn Date: Wed, 11 Jul 2018 12:00:45 -0400 Subject: packet: reset network header if packet shorter than ll reserved space If variable length link layer headers result in a packet shorter than dev->hard_header_len, reset the network header offset. Else skb->mac_len may exceed skb->len after skb_mac_reset_len. packet_sendmsg_spkt already has similar logic. Fixes: b84bbaf7a6c8 ("packet: in packet_snd start writing at link layer allocation") Signed-off-by: Willem de Bruijn Signed-off-by: David S. Miller --- net/packet/af_packet.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c index 57634bc3da74..9b27d0cd766d 100644 --- a/net/packet/af_packet.c +++ b/net/packet/af_packet.c @@ -2878,6 +2878,8 @@ static int packet_snd(struct socket *sock, struct msghdr *msg, size_t len) goto out_free; } else if (reserve) { skb_reserve(skb, -reserve); + if (len < reserve) + skb_reset_network_header(skb); } /* Returns -EFAULT on error */ -- cgit v1.2.3 From 8f19f12bdcc612bf39d0dbae6d0509a4939aaac3 Mon Sep 17 00:00:00 2001 From: Willem de Bruijn Date: Wed, 11 Jul 2018 12:00:46 -0400 Subject: selftests: in udpgso_bench do not test udp zerocopy The udpgso benchmark compares various configurations of UDP and TCP. Including one that is not upstream, udp zerocopy. This is a leftover from the earlier RFC patchset. The test is part of kselftests and run in continuous spinners. Remove the failing case to make the test start passing. Fixes: 3a687bef148d ("selftests: udp gso benchmark") Reported-by: Naresh Kamboju Signed-off-by: Willem de Bruijn Signed-off-by: David S. Miller --- tools/testing/selftests/net/udpgso_bench.sh | 3 --- 1 file changed, 3 deletions(-) diff --git a/tools/testing/selftests/net/udpgso_bench.sh b/tools/testing/selftests/net/udpgso_bench.sh index 792fa4d0285e..850767befa47 100755 --- a/tools/testing/selftests/net/udpgso_bench.sh +++ b/tools/testing/selftests/net/udpgso_bench.sh @@ -35,9 +35,6 @@ run_udp() { echo "udp gso" run_in_netns ${args} -S - - echo "udp gso zerocopy" - run_in_netns ${args} -S -z } run_tcp() { -- cgit v1.2.3 From 1b350ea0c2f4df9aa30426614c8eb755a8c32814 Mon Sep 17 00:00:00 2001 From: Varun Prakash Date: Wed, 11 Jul 2018 22:03:43 +0530 Subject: scsi: target: iscsi: cxgbit: fix max iso npdu calculation - rounddown CXGBIT_MAX_ISO_PAYLOAD by csk->emss before calculating max_iso_npdu to get max TCP payload in multiple of mss. - call cxgbit_set_digest() before cxgbit_set_iso_npdu() to set csk->submode, it is used in calculating number of iso pdus. Signed-off-by: Varun Prakash Reviewed-by: Mike Christie Signed-off-by: Martin K. Petersen --- drivers/target/iscsi/cxgbit/cxgbit_target.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/drivers/target/iscsi/cxgbit/cxgbit_target.c b/drivers/target/iscsi/cxgbit/cxgbit_target.c index 514986b57c2d..25eb3891e34b 100644 --- a/drivers/target/iscsi/cxgbit/cxgbit_target.c +++ b/drivers/target/iscsi/cxgbit/cxgbit_target.c @@ -652,6 +652,7 @@ static int cxgbit_set_iso_npdu(struct cxgbit_sock *csk) struct iscsi_param *param; u32 mrdsl, mbl; u32 max_npdu, max_iso_npdu; + u32 max_iso_payload; if (conn->login->leading_connection) { param = iscsi_find_param_from_key(MAXBURSTLENGTH, @@ -670,8 +671,10 @@ static int cxgbit_set_iso_npdu(struct cxgbit_sock *csk) mrdsl = conn_ops->MaxRecvDataSegmentLength; max_npdu = mbl / mrdsl; - max_iso_npdu = CXGBIT_MAX_ISO_PAYLOAD / - (ISCSI_HDR_LEN + mrdsl + + max_iso_payload = rounddown(CXGBIT_MAX_ISO_PAYLOAD, csk->emss); + + max_iso_npdu = max_iso_payload / + (ISCSI_HDR_LEN + mrdsl + cxgbit_digest_len[csk->submode]); csk->max_iso_npdu = min(max_npdu, max_iso_npdu); @@ -741,6 +744,9 @@ static int cxgbit_set_params(struct iscsi_conn *conn) if (conn_ops->MaxRecvDataSegmentLength > cdev->mdsl) conn_ops->MaxRecvDataSegmentLength = cdev->mdsl; + if (cxgbit_set_digest(csk)) + return -1; + if (conn->login->leading_connection) { param = iscsi_find_param_from_key(ERRORRECOVERYLEVEL, conn->param_list); @@ -764,7 +770,7 @@ static int cxgbit_set_params(struct iscsi_conn *conn) if (is_t5(cdev->lldi.adapter_type)) goto enable_ddp; else - goto enable_digest; + return 0; } if (test_bit(CDEV_ISO_ENABLE, &cdev->flags)) { @@ -781,10 +787,6 @@ enable_ddp: } } -enable_digest: - if (cxgbit_set_digest(csk)) - return -1; - return 0; } -- cgit v1.2.3 From a17037e7d59075053b522048742a08ac9500bde8 Mon Sep 17 00:00:00 2001 From: Varun Prakash Date: Wed, 11 Jul 2018 22:09:52 +0530 Subject: scsi: libiscsi: fix possible NULL pointer dereference in case of TMF In iscsi_check_tmf_restrictions() task->hdr is dereferenced to print the opcode, it is possible that task->hdr is NULL. There are two cases based on opcode argument: 1. ISCSI_OP_SCSI_CMD - In this case alloc_pdu() is called after iscsi_check_tmf_restrictions() iscsi_prep_scsi_cmd_pdu() -> iscsi_check_tmf_restrictions() -> alloc_pdu(). Transport drivers allocate memory for iSCSI hdr in alloc_pdu() and assign it to task->hdr. In case of TMF task->hdr will be NULL resulting in NULL pointer dereference. 2. ISCSI_OP_SCSI_DATA_OUT - In this case transport driver can free the memory for iSCSI hdr after transmitting the pdu so task->hdr can be NULL or invalid. This patch fixes this issue by removing task->hdr->opcode from the printk statement. Signed-off-by: Varun Prakash Signed-off-by: Martin K. Petersen --- drivers/scsi/libiscsi.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index d6093838f5f2..c972cc2b3d5b 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -284,11 +284,11 @@ static int iscsi_check_tmf_restrictions(struct iscsi_task *task, int opcode) */ if (opcode != ISCSI_OP_SCSI_DATA_OUT) { iscsi_conn_printk(KERN_INFO, conn, - "task [op %x/%x itt " + "task [op %x itt " "0x%x/0x%x] " "rejected.\n", - task->hdr->opcode, opcode, - task->itt, task->hdr_itt); + opcode, task->itt, + task->hdr_itt); return -EACCES; } /* @@ -297,10 +297,10 @@ static int iscsi_check_tmf_restrictions(struct iscsi_task *task, int opcode) */ if (conn->session->fast_abort) { iscsi_conn_printk(KERN_INFO, conn, - "task [op %x/%x itt " + "task [op %x itt " "0x%x/0x%x] fast abort.\n", - task->hdr->opcode, opcode, - task->itt, task->hdr_itt); + opcode, task->itt, + task->hdr_itt); return -EACCES; } break; -- cgit v1.2.3 From c170e5a8d222537e98aa8d4fddb667ff7a2ee114 Mon Sep 17 00:00:00 2001 From: Tony Battersby Date: Thu, 12 Jul 2018 16:30:45 -0400 Subject: scsi: sg: fix minor memory leak in error path Fix a minor memory leak when there is an error opening a /dev/sg device. Fixes: cc833acbee9d ("sg: O_EXCL and other lock handling") Cc: Reviewed-by: Ewan D. Milne Signed-off-by: Tony Battersby Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen --- drivers/scsi/sg.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index cd2fdac000c9..2962a38c5068 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -2185,6 +2185,7 @@ sg_add_sfp(Sg_device * sdp) write_lock_irqsave(&sdp->sfd_lock, iflags); if (atomic_read(&sdp->detaching)) { write_unlock_irqrestore(&sdp->sfd_lock, iflags); + kfree(sfp); return ERR_PTR(-ENODEV); } list_add_tail(&sfp->sfd_siblings, &sdp->sfds); -- cgit v1.2.3 From 8e4a4189ce02fe53b6f3ffcc1ac5a3a9967f2611 Mon Sep 17 00:00:00 2001 From: Tony Battersby Date: Thu, 12 Jul 2018 18:09:21 -0400 Subject: scsi: sg: update comment for blk_get_request() The calling convention of blk_get_request() has changed in lk 4.18; update the comment in sg.c to match. Fixes: ff005a066240 ("block: sanitize blk_get_request calling conventions") Signed-off-by: Tony Battersby Acked-by: Douglas Gilbert Signed-off-by: Martin K. Petersen --- drivers/scsi/sg.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index 2962a38c5068..ba9ba0e04f42 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -1741,15 +1741,11 @@ sg_start_req(Sg_request *srp, unsigned char *cmd) * * With scsi-mq enabled, there are a fixed number of preallocated * requests equal in number to shost->can_queue. If all of the - * preallocated requests are already in use, then using GFP_ATOMIC with - * blk_get_request() will return -EWOULDBLOCK, whereas using GFP_KERNEL - * will cause blk_get_request() to sleep until an active command - * completes, freeing up a request. Neither option is ideal, but - * GFP_KERNEL is the better choice to prevent userspace from getting an - * unexpected EWOULDBLOCK. - * - * With scsi-mq disabled, blk_get_request() with GFP_KERNEL usually - * does not sleep except under memory pressure. + * preallocated requests are already in use, then blk_get_request() + * will sleep until an active command completes, freeing up a request. + * Although waiting in an asynchronous interface is less than ideal, we + * do not want to use BLK_MQ_REQ_NOWAIT here because userspace might + * not expect an EWOULDBLOCK from this condition. */ rq = blk_get_request(q, hp->dxfer_direction == SG_DXFER_TO_DEV ? REQ_OP_SCSI_OUT : REQ_OP_SCSI_IN, 0); -- cgit v1.2.3 From 2546da99212f22034aecf279da9c47cbfac6c981 Mon Sep 17 00:00:00 2001 From: Stephan Mueller Date: Sat, 7 Jul 2018 20:41:47 +0200 Subject: crypto: af_alg - Initialize sg_num_bytes in error code path The RX SGL in processing is already registered with the RX SGL tracking list to support proper cleanup. The cleanup code path uses the sg_num_bytes variable which must therefore be always initialized, even in the error code path. Signed-off-by: Stephan Mueller Reported-by: syzbot+9c251bdd09f83b92ba95@syzkaller.appspotmail.com #syz test: https://github.com/google/kmsan.git master CC: #4.14 Fixes: e870456d8e7c ("crypto: algif_skcipher - overhaul memory management") Fixes: d887c52d6ae4 ("crypto: algif_aead - overhaul memory management") Signed-off-by: Herbert Xu --- crypto/af_alg.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/crypto/af_alg.c b/crypto/af_alg.c index 7846c0c20cfe..b52a14fc3bae 100644 --- a/crypto/af_alg.c +++ b/crypto/af_alg.c @@ -1156,8 +1156,10 @@ int af_alg_get_rsgl(struct sock *sk, struct msghdr *msg, int flags, /* make one iovec available as scatterlist */ err = af_alg_make_sg(&rsgl->sgl, &msg->msg_iter, seglen); - if (err < 0) + if (err < 0) { + rsgl->sg_num_bytes = 0; return err; + } /* chain the new scatterlist with previous one */ if (areq->last_rsgl) -- cgit v1.2.3 From 20c5bbc640cdf8e23947990ab98f5ba950a3e1b0 Mon Sep 17 00:00:00 2001 From: David Sterba Date: Wed, 20 Jun 2018 19:51:28 +0200 Subject: btrfs: restore uuid_mutex in btrfs_open_devices Commit 542c5908abfe84f7b4c1 ("btrfs: replace uuid_mutex by device_list_mutex in btrfs_open_devices") switched to device_list_mutex as we need that for the device list traversal, but we also need uuid_mutex to protect access to fs_devices::opened to be consistent with other users of that. Fixes: 542c5908abfe84f7b4c1 ("btrfs: replace uuid_mutex by device_list_mutex in btrfs_open_devices") Reviewed-by: Anand Jain Signed-off-by: David Sterba --- fs/btrfs/volumes.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index e034ad9e23b4..1da162928d1a 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -1146,6 +1146,7 @@ int btrfs_open_devices(struct btrfs_fs_devices *fs_devices, { int ret; + mutex_lock(&uuid_mutex); mutex_lock(&fs_devices->device_list_mutex); if (fs_devices->opened) { fs_devices->opened++; @@ -1155,6 +1156,7 @@ int btrfs_open_devices(struct btrfs_fs_devices *fs_devices, ret = open_fs_devices(fs_devices, flags, holder); } mutex_unlock(&fs_devices->device_list_mutex); + mutex_unlock(&uuid_mutex); return ret; } -- cgit v1.2.3 From 509d7648135f914a3dd64c17484b33df5dd0a19c Mon Sep 17 00:00:00 2001 From: Magnus Karlsson Date: Wed, 11 Jul 2018 10:12:49 +0200 Subject: xsk: do not return ENXIO from TX copy mode This patch removes the ENXIO return code from TX copy-mode when someone has forcefully changed the number of queues on the device so that the queue bound to the socket is no longer available. Just silently stop sending anything as in zero-copy mode so the error reporting gets consistent between the two modes. Fixes: 35fcde7f8deb ("xsk: support for Tx") Signed-off-by: Magnus Karlsson Signed-off-by: Daniel Borkmann --- net/xdp/xsk.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c index 7d220cbd09b6..08d09115093e 100644 --- a/net/xdp/xsk.c +++ b/net/xdp/xsk.c @@ -244,10 +244,8 @@ static int xsk_generic_xmit(struct sock *sk, struct msghdr *m, goto out; } - if (xs->queue_id >= xs->dev->real_num_tx_queues) { - err = -ENXIO; + if (xs->queue_id >= xs->dev->real_num_tx_queues) goto out; - } skb = sock_alloc_send_skb(sk, len, 1, &err); if (unlikely(!skb)) { -- cgit v1.2.3 From 9684f5e7c8cdf076aeec81344d4893a30f7aa6a1 Mon Sep 17 00:00:00 2001 From: Magnus Karlsson Date: Wed, 11 Jul 2018 10:12:50 +0200 Subject: xsk: do not return EAGAIN from sendmsg when completion queue is full This patch stops returning EAGAIN in TX copy mode when the completion queue is full as zero-copy does not do this. Instead this situation can be detected by comparing the head and tail pointers of the completion queue in both modes. In any case, EAGAIN was not the correct error code here since no amount of calling sendmsg will solve the problem. Only consuming one or more messages on the completion queue will fix this. With this patch, the error reporting becomes consistent between copy mode and zero-copy mode. Fixes: 35fcde7f8deb ("xsk: support for Tx") Signed-off-by: Magnus Karlsson Signed-off-by: Daniel Borkmann --- net/xdp/xsk.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c index 08d09115093e..87567232d0f8 100644 --- a/net/xdp/xsk.c +++ b/net/xdp/xsk.c @@ -233,10 +233,8 @@ static int xsk_generic_xmit(struct sock *sk, struct msghdr *m, goto out; } - if (xskq_reserve_addr(xs->umem->cq)) { - err = -EAGAIN; + if (xskq_reserve_addr(xs->umem->cq)) goto out; - } len = desc.len; if (unlikely(len > xs->dev->mtu)) { -- cgit v1.2.3 From 6efb4436f7fcc50cc3fb9a113d0f16e3968172b1 Mon Sep 17 00:00:00 2001 From: Magnus Karlsson Date: Wed, 11 Jul 2018 10:12:51 +0200 Subject: xsk: always return ENOBUFS from sendmsg if there is no TX queue This patch makes sure ENOBUFS is always returned from sendmsg if there is no TX queue configured. This was not the case for zero-copy mode. With this patch this error reporting is consistent between copy mode and zero-copy mode. Fixes: ac98d8aab61b ("xsk: wire upp Tx zero-copy functions") Signed-off-by: Magnus Karlsson Signed-off-by: Daniel Borkmann --- net/xdp/xsk.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c index 87567232d0f8..9c784307f7b0 100644 --- a/net/xdp/xsk.c +++ b/net/xdp/xsk.c @@ -218,9 +218,6 @@ static int xsk_generic_xmit(struct sock *sk, struct msghdr *m, struct sk_buff *skb; int err = 0; - if (unlikely(!xs->tx)) - return -ENOBUFS; - mutex_lock(&xs->mutex); while (xskq_peek_desc(xs->tx, &desc)) { @@ -296,6 +293,8 @@ static int xsk_sendmsg(struct socket *sock, struct msghdr *m, size_t total_len) return -ENXIO; if (unlikely(!(xs->dev->flags & IFF_UP))) return -ENETDOWN; + if (unlikely(!xs->tx)) + return -ENOBUFS; if (need_wait) return -EOPNOTSUPP; -- cgit v1.2.3 From 09210c4bcc065d9d91ef3c051902ad18252cd3c0 Mon Sep 17 00:00:00 2001 From: Magnus Karlsson Date: Wed, 11 Jul 2018 10:12:52 +0200 Subject: xsk: do not return EMSGSIZE in copy mode for packets larger than MTU This patch stops returning EMSGSIZE from sendmsg in copy mode when the size of the packet is larger than the MTU. Just send it to the device so that it will drop it as in zero-copy mode. This makes the error reporting consistent between copy mode and zero-copy mode. Fixes: 35fcde7f8deb ("xsk: support for Tx") Signed-off-by: Magnus Karlsson Signed-off-by: Daniel Borkmann --- net/xdp/xsk.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c index 9c784307f7b0..72335c2e8108 100644 --- a/net/xdp/xsk.c +++ b/net/xdp/xsk.c @@ -233,15 +233,10 @@ static int xsk_generic_xmit(struct sock *sk, struct msghdr *m, if (xskq_reserve_addr(xs->umem->cq)) goto out; - len = desc.len; - if (unlikely(len > xs->dev->mtu)) { - err = -EMSGSIZE; - goto out; - } - if (xs->queue_id >= xs->dev->real_num_tx_queues) goto out; + len = desc.len; skb = sock_alloc_send_skb(sk, len, 1, &err); if (unlikely(!skb)) { err = -EAGAIN; -- cgit v1.2.3 From d5418ae3f9443f911d4324c0cade988ced39cfbe Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Fri, 13 Jul 2018 14:50:42 +0200 Subject: ASoC: add DT documentation for the sound-name-prefix property Signed-off-by: Jerome Brunet Signed-off-by: Mark Brown --- .../devicetree/bindings/sound/name-prefix.txt | 24 ++++++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/name-prefix.txt diff --git a/Documentation/devicetree/bindings/sound/name-prefix.txt b/Documentation/devicetree/bindings/sound/name-prefix.txt new file mode 100644 index 000000000000..645775908657 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/name-prefix.txt @@ -0,0 +1,24 @@ +Name prefix: + +Card implementing the routing property define the connection between +audio components as list of string pair. Component using the same +sink/source names may use the name prefix property to prepend the +name of their sinks/sources with the provided string. + +Optional name prefix property: +- sound-name-prefix : string using as prefix for the sink/source names of + the component. + +Example: Two instances of the same component. + +amp0: analog-amplifier@0 { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpio GPIOH_3 0>; + sound-name-prefix = "FRONT"; +}; + +amp1: analog-amplifier@1 { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpio GPIOH_4 0>; + sound-name-prefix = "BACK"; +}; -- cgit v1.2.3 From aefba45539bc4868c1fae336410aec907ee0882a Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Fri, 13 Jul 2018 14:50:43 +0200 Subject: ASoC: allow soc-core to pick up name prefixes from component nodes When the component does not match the configuration table provided by the card, let soc-core check the component node for a name prefix Signed-off-by: Jerome Brunet Signed-off-by: Mark Brown --- sound/soc/soc-core.c | 28 +++++++++++++++++++++++----- 1 file changed, 23 insertions(+), 5 deletions(-) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 00bd58d167dd..3be0310d5c81 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -1193,15 +1193,27 @@ void snd_soc_remove_dai_link(struct snd_soc_card *card, } EXPORT_SYMBOL_GPL(snd_soc_remove_dai_link); +static void soc_set_of_name_prefix(struct snd_soc_component *component) +{ + struct device_node *component_of_node = component->dev->of_node; + const char *str; + int ret; + + if (!component_of_node && component->dev->parent) + component_of_node = component->dev->parent->of_node; + + ret = of_property_read_string(component_of_node, "sound-name-prefix", + &str); + if (!ret) + component->name_prefix = str; +} + static void soc_set_name_prefix(struct snd_soc_card *card, struct snd_soc_component *component) { int i; - if (card->codec_conf == NULL) - return; - - for (i = 0; i < card->num_configs; i++) { + for (i = 0; i < card->num_configs && card->codec_conf; i++) { struct snd_soc_codec_conf *map = &card->codec_conf[i]; struct device_node *component_of_node = component->dev->of_node; @@ -1213,8 +1225,14 @@ static void soc_set_name_prefix(struct snd_soc_card *card, if (map->dev_name && strcmp(component->name, map->dev_name)) continue; component->name_prefix = map->name_prefix; - break; + return; } + + /* + * If there is no configuration table or no match in the table, + * check if a prefix is provided in the node + */ + soc_set_of_name_prefix(component); } static int soc_probe_component(struct snd_soc_card *card, -- cgit v1.2.3 From b8110a87b75f948d978c06e130cc68026645c4a1 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 13 Jul 2018 18:05:57 +0300 Subject: ASoC: qdsp6: q6afe-dai: fix a range check in of_q6afe_parse_dai_data() The main thing is that the data->priv[] array has AFE_PORT_MAX elements so the > condition should be >=. But we may as well check for negative values as well just to be safe. Fixes: 24c4cbcfac09 ("ASoC: qdsp6: q6afe: Add q6afe dai driver") Signed-off-by: Dan Carpenter Signed-off-by: Mark Brown --- sound/soc/qcom/qdsp6/q6afe-dai.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/qcom/qdsp6/q6afe-dai.c b/sound/soc/qcom/qdsp6/q6afe-dai.c index a373ca5523ff..9ba95956ada8 100644 --- a/sound/soc/qcom/qdsp6/q6afe-dai.c +++ b/sound/soc/qcom/qdsp6/q6afe-dai.c @@ -1183,7 +1183,7 @@ static void of_q6afe_parse_dai_data(struct device *dev, int id, i, num_lines; ret = of_property_read_u32(node, "reg", &id); - if (ret || id > AFE_PORT_MAX) { + if (ret || id < 0 || id >= AFE_PORT_MAX) { dev_err(dev, "valid dai id not found:%d\n", ret); continue; } -- cgit v1.2.3 From 090345ce7265dd111299e3a63cdc79c3ef924481 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 13 Jul 2018 18:11:04 +0300 Subject: ASoC: qdsp6: q6routing: off by one in routing_hw_params() The data->port_data[] array has AFE_MAX_PORTS elements so the check should be >= instead of > or we write one element beyond the end of the array. Fixes: e3a33673e845 ("ASoC: qdsp6: q6routing: Add q6routing driver") Signed-off-by: Dan Carpenter Signed-off-by: Mark Brown --- sound/soc/qcom/qdsp6/q6routing.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/qcom/qdsp6/q6routing.c b/sound/soc/qcom/qdsp6/q6routing.c index 593f66b8622f..7a19d6278406 100644 --- a/sound/soc/qcom/qdsp6/q6routing.c +++ b/sound/soc/qcom/qdsp6/q6routing.c @@ -899,7 +899,7 @@ static int routing_hw_params(struct snd_pcm_substream *substream, else path_type = ADM_PATH_LIVE_REC; - if (be_id > AFE_MAX_PORTS) + if (be_id >= AFE_MAX_PORTS) return -EINVAL; session = &data->port_data[be_id]; -- cgit v1.2.3 From 97b191702b05a7cb9fa6d846adba68419cbbc7a6 Mon Sep 17 00:00:00 2001 From: Naohiro Aota Date: Fri, 13 Jul 2018 23:07:20 +0900 Subject: btrfs: fix use-after-free of cmp workspace pages btrfs_cmp_data_free() puts cmp's src_pages and dst_pages, but leaves their page address intact. Now, if you hit "goto again" in btrfs_extent_same_range() and hit some error in btrfs_cmp_data_prepare(), you'll try to unlock/put already put pages. This is simple fix to reset the address to avoid use-after-free. Fixes: 67b07bd4bec5 ("Btrfs: reuse cmp workspace in EXTENT_SAME ioctl") Signed-off-by: Naohiro Aota Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/ioctl.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index a4d2856a4df1..aa914aaa00f8 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -3327,11 +3327,13 @@ static void btrfs_cmp_data_free(struct cmp_pages *cmp) if (pg) { unlock_page(pg); put_page(pg); + cmp->src_pages[i] = NULL; } pg = cmp->dst_pages[i]; if (pg) { unlock_page(pg); put_page(pg); + cmp->dst_pages[i] = NULL; } } } -- cgit v1.2.3 From 02ce6ce2e1d07e31e8314c761a2caa087ea094ce Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 12 Jul 2018 08:38:09 -0500 Subject: drm/amdgpu/pp/smu7: use a local variable for toc indexing MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Rather than using the index variable stored in vram. If the device fails to come back online after a resume cycle, reads from vram will return all 1s which will cause a segfault. Based on a patch from Thomas Martitz . This avoids the segfault, but we still need to sort out why the GPU does not come back online after a resume. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=105760 Acked-by: Christian König Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/powerplay/smumgr/smu7_smumgr.c | 23 +++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-) diff --git a/drivers/gpu/drm/amd/powerplay/smumgr/smu7_smumgr.c b/drivers/gpu/drm/amd/powerplay/smumgr/smu7_smumgr.c index d644a9bb9078..9f407c48d4f0 100644 --- a/drivers/gpu/drm/amd/powerplay/smumgr/smu7_smumgr.c +++ b/drivers/gpu/drm/amd/powerplay/smumgr/smu7_smumgr.c @@ -381,6 +381,7 @@ int smu7_request_smu_load_fw(struct pp_hwmgr *hwmgr) uint32_t fw_to_load; int result = 0; struct SMU_DRAMData_TOC *toc; + uint32_t num_entries = 0; if (!hwmgr->reload_fw) { pr_info("skip reloading...\n"); @@ -422,41 +423,41 @@ int smu7_request_smu_load_fw(struct pp_hwmgr *hwmgr) } toc = (struct SMU_DRAMData_TOC *)smu_data->header; - toc->num_entries = 0; toc->structure_version = 1; PP_ASSERT_WITH_CODE(0 == smu7_populate_single_firmware_entry(hwmgr, - UCODE_ID_RLC_G, &toc->entry[toc->num_entries++]), + UCODE_ID_RLC_G, &toc->entry[num_entries++]), "Failed to Get Firmware Entry.", return -EINVAL); PP_ASSERT_WITH_CODE(0 == smu7_populate_single_firmware_entry(hwmgr, - UCODE_ID_CP_CE, &toc->entry[toc->num_entries++]), + UCODE_ID_CP_CE, &toc->entry[num_entries++]), "Failed to Get Firmware Entry.", return -EINVAL); PP_ASSERT_WITH_CODE(0 == smu7_populate_single_firmware_entry(hwmgr, - UCODE_ID_CP_PFP, &toc->entry[toc->num_entries++]), + UCODE_ID_CP_PFP, &toc->entry[num_entries++]), "Failed to Get Firmware Entry.", return -EINVAL); PP_ASSERT_WITH_CODE(0 == smu7_populate_single_firmware_entry(hwmgr, - UCODE_ID_CP_ME, &toc->entry[toc->num_entries++]), + UCODE_ID_CP_ME, &toc->entry[num_entries++]), "Failed to Get Firmware Entry.", return -EINVAL); PP_ASSERT_WITH_CODE(0 == smu7_populate_single_firmware_entry(hwmgr, - UCODE_ID_CP_MEC, &toc->entry[toc->num_entries++]), + UCODE_ID_CP_MEC, &toc->entry[num_entries++]), "Failed to Get Firmware Entry.", return -EINVAL); PP_ASSERT_WITH_CODE(0 == smu7_populate_single_firmware_entry(hwmgr, - UCODE_ID_CP_MEC_JT1, &toc->entry[toc->num_entries++]), + UCODE_ID_CP_MEC_JT1, &toc->entry[num_entries++]), "Failed to Get Firmware Entry.", return -EINVAL); PP_ASSERT_WITH_CODE(0 == smu7_populate_single_firmware_entry(hwmgr, - UCODE_ID_CP_MEC_JT2, &toc->entry[toc->num_entries++]), + UCODE_ID_CP_MEC_JT2, &toc->entry[num_entries++]), "Failed to Get Firmware Entry.", return -EINVAL); PP_ASSERT_WITH_CODE(0 == smu7_populate_single_firmware_entry(hwmgr, - UCODE_ID_SDMA0, &toc->entry[toc->num_entries++]), + UCODE_ID_SDMA0, &toc->entry[num_entries++]), "Failed to Get Firmware Entry.", return -EINVAL); PP_ASSERT_WITH_CODE(0 == smu7_populate_single_firmware_entry(hwmgr, - UCODE_ID_SDMA1, &toc->entry[toc->num_entries++]), + UCODE_ID_SDMA1, &toc->entry[num_entries++]), "Failed to Get Firmware Entry.", return -EINVAL); if (!hwmgr->not_vf) PP_ASSERT_WITH_CODE(0 == smu7_populate_single_firmware_entry(hwmgr, - UCODE_ID_MEC_STORAGE, &toc->entry[toc->num_entries++]), + UCODE_ID_MEC_STORAGE, &toc->entry[num_entries++]), "Failed to Get Firmware Entry.", return -EINVAL); + toc->num_entries = num_entries; smu7_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_DRV_DRAM_ADDR_HI, upper_32_bits(smu_data->header_buffer.mc_addr)); smu7_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_DRV_DRAM_ADDR_LO, lower_32_bits(smu_data->header_buffer.mc_addr)); -- cgit v1.2.3 From e78bfb0751d4e312699106ba7efbed2bab1a53ca Mon Sep 17 00:00:00 2001 From: Stefano Brivio Date: Fri, 13 Jul 2018 13:21:07 +0200 Subject: skbuff: Unconditionally copy pfmemalloc in __skb_clone() Commit 8b7008620b84 ("net: Don't copy pfmemalloc flag in __copy_skb_header()") introduced a different handling for the pfmemalloc flag in copy and clone paths. In __skb_clone(), now, the flag is set only if it was set in the original skb, but not cleared if it wasn't. This is wrong and might lead to socket buffers being flagged with pfmemalloc even if the skb data wasn't allocated from pfmemalloc reserves. Copy the flag instead of ORing it. Reported-by: Sabrina Dubroca Fixes: 8b7008620b84 ("net: Don't copy pfmemalloc flag in __copy_skb_header()") Signed-off-by: Stefano Brivio Tested-by: Sabrina Dubroca Signed-off-by: David S. Miller --- net/core/skbuff.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 4df3164bb5fc..8e51f8555e11 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -858,8 +858,7 @@ static struct sk_buff *__skb_clone(struct sk_buff *n, struct sk_buff *skb) n->cloned = 1; n->nohdr = 0; n->peeked = 0; - if (skb->pfmemalloc) - n->pfmemalloc = 1; + C(pfmemalloc); n->destructor = NULL; C(tail); C(end); -- cgit v1.2.3 From c3086637b0d7dbee0925697f8dbee2bcf9637b9f Mon Sep 17 00:00:00 2001 From: Michael Heimpold Date: Wed, 11 Jul 2018 23:10:55 +0200 Subject: net: ethtool: fix spelling mistake: "tubale" -> "tunable" Signed-off-by: Michael Heimpold Signed-off-by: David S. Miller --- include/uapi/linux/ethtool.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index 4ca65b56084f..7363f18e65a5 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -226,7 +226,7 @@ enum tunable_id { ETHTOOL_TX_COPYBREAK, ETHTOOL_PFC_PREVENTION_TOUT, /* timeout in msecs */ /* - * Add your fresh new tubale attribute above and remember to update + * Add your fresh new tunable attribute above and remember to update * tunable_strings[] in net/core/ethtool.c */ __ETHTOOL_TUNABLE_COUNT, -- cgit v1.2.3 From 5fc853cc01c68f84984ecc2d5fd777ecad78240f Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 12 Jul 2018 15:23:45 +0300 Subject: qlogic: check kstrtoul() for errors We accidentally left out the error handling for kstrtoul(). Fixes: a520030e326a ("qlcnic: Implement flash sysfs callback for 83xx adapter") Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c index 891f03a7a33d..8d7b9bb910f2 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c @@ -1128,6 +1128,8 @@ static ssize_t qlcnic_83xx_sysfs_flash_write_handler(struct file *filp, struct qlcnic_adapter *adapter = dev_get_drvdata(dev); ret = kstrtoul(buf, 16, &data); + if (ret) + return ret; switch (data) { case QLC_83XX_FLASH_SECTOR_ERASE_CMD: -- cgit v1.2.3 From b0c05d0e99d98d7f0cd41efc1eeec94efdc3325d Mon Sep 17 00:00:00 2001 From: Yuchung Cheng Date: Thu, 12 Jul 2018 06:04:52 -0700 Subject: tcp: fix dctcp delayed ACK schedule Previously, when a data segment was sent an ACK was piggybacked on the data segment without generating a CA_EVENT_NON_DELAYED_ACK event to notify congestion control modules. So the DCTCP ca->delayed_ack_reserved flag could incorrectly stay set when in fact there were no delayed ACKs being reserved. This could result in sending a special ECN notification ACK that carries an older ACK sequence, when in fact there was no need for such an ACK. DCTCP keeps track of the delayed ACK status with its own separate state ca->delayed_ack_reserved. Previously it may accidentally cancel the delayed ACK without updating this field upon sending a special ACK that carries a older ACK sequence. This inconsistency would lead to DCTCP receiver never acknowledging the latest data until the sender times out and retry in some cases. Packetdrill script (provided by Larry Brakmo) 0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 0.000 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 0.000 setsockopt(3, SOL_TCP, TCP_CONGESTION, "dctcp", 5) = 0 0.000 bind(3, ..., ...) = 0 0.000 listen(3, 1) = 0 0.100 < [ect0] SEW 0:0(0) win 32792 0.100 > SE. 0:0(0) ack 1 0.110 < [ect0] . 1:1(0) ack 1 win 257 0.200 accept(3, ..., ...) = 4 0.200 < [ect0] . 1:1001(1000) ack 1 win 257 0.200 > [ect01] . 1:1(0) ack 1001 0.200 write(4, ..., 1) = 1 0.200 > [ect01] P. 1:2(1) ack 1001 0.200 < [ect0] . 1001:2001(1000) ack 2 win 257 0.200 write(4, ..., 1) = 1 0.200 > [ect01] P. 2:3(1) ack 2001 0.200 < [ect0] . 2001:3001(1000) ack 3 win 257 0.200 < [ect0] . 3001:4001(1000) ack 3 win 257 0.200 > [ect01] . 3:3(0) ack 4001 0.210 < [ce] P. 4001:4501(500) ack 3 win 257 +0.001 read(4, ..., 4500) = 4500 +0 write(4, ..., 1) = 1 +0 > [ect01] PE. 3:4(1) ack 4501 +0.010 < [ect0] W. 4501:5501(1000) ack 4 win 257 // Previously the ACK sequence below would be 4501, causing a long RTO +0.040~+0.045 > [ect01] . 4:4(0) ack 5501 // delayed ack +0.311 < [ect0] . 5501:6501(1000) ack 4 win 257 // More data +0 > [ect01] . 4:4(0) ack 6501 // now acks everything +0.500 < F. 9501:9501(0) ack 4 win 257 Reported-by: Larry Brakmo Signed-off-by: Yuchung Cheng Signed-off-by: Eric Dumazet Acked-by: Neal Cardwell Acked-by: Lawrence Brakmo Signed-off-by: David S. Miller --- net/ipv4/tcp_dctcp.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/ipv4/tcp_dctcp.c b/net/ipv4/tcp_dctcp.c index 5f5e5936760e..89f88b0d8167 100644 --- a/net/ipv4/tcp_dctcp.c +++ b/net/ipv4/tcp_dctcp.c @@ -134,7 +134,8 @@ static void dctcp_ce_state_0_to_1(struct sock *sk) /* State has changed from CE=0 to CE=1 and delayed * ACK has not sent yet. */ - if (!ca->ce_state && ca->delayed_ack_reserved) { + if (!ca->ce_state && + inet_csk(sk)->icsk_ack.pending & ICSK_ACK_TIMER) { u32 tmp_rcv_nxt; /* Save current rcv_nxt. */ @@ -164,7 +165,8 @@ static void dctcp_ce_state_1_to_0(struct sock *sk) /* State has changed from CE=1 to CE=0 and delayed * ACK has not sent yet. */ - if (ca->ce_state && ca->delayed_ack_reserved) { + if (ca->ce_state && + inet_csk(sk)->icsk_ack.pending & ICSK_ACK_TIMER) { u32 tmp_rcv_nxt; /* Save current rcv_nxt. */ -- cgit v1.2.3 From a69258f7aa2623e0930212f09c586fd06674ad79 Mon Sep 17 00:00:00 2001 From: Yuchung Cheng Date: Thu, 12 Jul 2018 06:04:53 -0700 Subject: tcp: remove DELAYED ACK events in DCTCP After fixing the way DCTCP tracking delayed ACKs, the delayed-ACK related callbacks are no longer needed Signed-off-by: Yuchung Cheng Signed-off-by: Eric Dumazet Acked-by: Neal Cardwell Acked-by: Lawrence Brakmo Signed-off-by: David S. Miller --- include/net/tcp.h | 2 -- net/ipv4/tcp_dctcp.c | 25 ------------------------- net/ipv4/tcp_output.c | 4 ---- 3 files changed, 31 deletions(-) diff --git a/include/net/tcp.h b/include/net/tcp.h index af3ec72d5d41..3482d13d655b 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -912,8 +912,6 @@ enum tcp_ca_event { CA_EVENT_LOSS, /* loss timeout */ CA_EVENT_ECN_NO_CE, /* ECT set, but not CE marked */ CA_EVENT_ECN_IS_CE, /* received CE marked IP packet */ - CA_EVENT_DELAYED_ACK, /* Delayed ack is sent */ - CA_EVENT_NON_DELAYED_ACK, }; /* Information about inbound ACK, passed to cong_ops->in_ack_event() */ diff --git a/net/ipv4/tcp_dctcp.c b/net/ipv4/tcp_dctcp.c index 89f88b0d8167..5869f89ca656 100644 --- a/net/ipv4/tcp_dctcp.c +++ b/net/ipv4/tcp_dctcp.c @@ -55,7 +55,6 @@ struct dctcp { u32 dctcp_alpha; u32 next_seq; u32 ce_state; - u32 delayed_ack_reserved; u32 loss_cwnd; }; @@ -96,7 +95,6 @@ static void dctcp_init(struct sock *sk) ca->dctcp_alpha = min(dctcp_alpha_on_init, DCTCP_MAX_ALPHA); - ca->delayed_ack_reserved = 0; ca->loss_cwnd = 0; ca->ce_state = 0; @@ -250,25 +248,6 @@ static void dctcp_state(struct sock *sk, u8 new_state) } } -static void dctcp_update_ack_reserved(struct sock *sk, enum tcp_ca_event ev) -{ - struct dctcp *ca = inet_csk_ca(sk); - - switch (ev) { - case CA_EVENT_DELAYED_ACK: - if (!ca->delayed_ack_reserved) - ca->delayed_ack_reserved = 1; - break; - case CA_EVENT_NON_DELAYED_ACK: - if (ca->delayed_ack_reserved) - ca->delayed_ack_reserved = 0; - break; - default: - /* Don't care for the rest. */ - break; - } -} - static void dctcp_cwnd_event(struct sock *sk, enum tcp_ca_event ev) { switch (ev) { @@ -278,10 +257,6 @@ static void dctcp_cwnd_event(struct sock *sk, enum tcp_ca_event ev) case CA_EVENT_ECN_NO_CE: dctcp_ce_state_1_to_0(sk); break; - case CA_EVENT_DELAYED_ACK: - case CA_EVENT_NON_DELAYED_ACK: - dctcp_update_ack_reserved(sk, ev); - break; default: /* Don't care for the rest. */ break; diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index 8e08b409c71e..00e5a300ddb9 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -3523,8 +3523,6 @@ void tcp_send_delayed_ack(struct sock *sk) int ato = icsk->icsk_ack.ato; unsigned long timeout; - tcp_ca_event(sk, CA_EVENT_DELAYED_ACK); - if (ato > TCP_DELACK_MIN) { const struct tcp_sock *tp = tcp_sk(sk); int max_ato = HZ / 2; @@ -3581,8 +3579,6 @@ void tcp_send_ack(struct sock *sk) if (sk->sk_state == TCP_CLOSE) return; - tcp_ca_event(sk, CA_EVENT_NON_DELAYED_ACK); - /* We are not putting this on the write queue, so * tcp_transmit_skb() will set the ownership to this * sock. -- cgit v1.2.3 From fafa35cce34ba4c4f6fd7f1026c038de0a2884af Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Fri, 22 Jun 2018 11:49:04 +0800 Subject: pinctrl: mt7622: fix error path on failing at groups building It should be to return an error code when failing at groups building. Cc: stable@vger.kernel.org Fixes: d6ed93551320 ("pinctrl: mediatek: add pinctrl driver for MT7622 SoC") Signed-off-by: Sean Wang Signed-off-by: Linus Walleij --- drivers/pinctrl/mediatek/pinctrl-mt7622.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/mediatek/pinctrl-mt7622.c b/drivers/pinctrl/mediatek/pinctrl-mt7622.c index e3f1ab2290fc..9ad8cb7730d3 100644 --- a/drivers/pinctrl/mediatek/pinctrl-mt7622.c +++ b/drivers/pinctrl/mediatek/pinctrl-mt7622.c @@ -1703,7 +1703,7 @@ static int mtk_pinctrl_probe(struct platform_device *pdev) err = mtk_build_groups(hw); if (err) { dev_err(&pdev->dev, "Failed to build groups\n"); - return 0; + return err; } /* Setup functions descriptions per SoC types */ -- cgit v1.2.3 From 8875059d2165f22236e87ed10188b0e18f116b93 Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Fri, 22 Jun 2018 11:49:05 +0800 Subject: pinctrl: mt7622: fix initialization sequence between eint and gpiochip Because gpichip applied in the driver must depend on mtk eint to implement the input data debouncing and the translation between gpio and irq, it's better to keep logic consistent with mtk eint being built prior to gpiochip being added. Cc: stable@vger.kernel.org Fixes: e6dabd38d8e7 ("pinctrl: mediatek: add EINT support to MT7622 SoC") Signed-off-by: Sean Wang Signed-off-by: Linus Walleij --- drivers/pinctrl/mediatek/pinctrl-mt7622.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/pinctrl/mediatek/pinctrl-mt7622.c b/drivers/pinctrl/mediatek/pinctrl-mt7622.c index 9ad8cb7730d3..e9eba62da233 100644 --- a/drivers/pinctrl/mediatek/pinctrl-mt7622.c +++ b/drivers/pinctrl/mediatek/pinctrl-mt7622.c @@ -1713,17 +1713,17 @@ static int mtk_pinctrl_probe(struct platform_device *pdev) return err; } + err = mtk_build_eint(hw, pdev); + if (err) + dev_warn(&pdev->dev, + "Failed to add EINT, but pinctrl still can work\n"); + err = mtk_build_gpiochip(hw, pdev->dev.of_node); if (err) { dev_err(&pdev->dev, "Failed to add gpio_chip\n"); return err; } - err = mtk_build_eint(hw, pdev); - if (err) - dev_warn(&pdev->dev, - "Failed to add EINT, but pinctrl still can work\n"); - platform_set_drvdata(pdev, hw); return 0; -- cgit v1.2.3 From ae6efcae79dd2888243634b69fce51208b650192 Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Fri, 22 Jun 2018 11:49:06 +0800 Subject: pinctrl: mt7622: fix that pinctrl_claim_hogs cannot work To allow claiming hogs by pinctrl, we cannot enable pinctrl until all groups and functions are being added done. Also, it's necessary that the corresponding gpiochip is being added when the pinctrl device is enabled. Cc: stable@vger.kernel.org Fixes: d6ed93551320 ("pinctrl: mediatek: add pinctrl driver for MT7622 SoC") Signed-off-by: Sean Wang Signed-off-by: Linus Walleij --- drivers/pinctrl/mediatek/pinctrl-mt7622.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/drivers/pinctrl/mediatek/pinctrl-mt7622.c b/drivers/pinctrl/mediatek/pinctrl-mt7622.c index e9eba62da233..42155d4e7f1b 100644 --- a/drivers/pinctrl/mediatek/pinctrl-mt7622.c +++ b/drivers/pinctrl/mediatek/pinctrl-mt7622.c @@ -1695,9 +1695,10 @@ static int mtk_pinctrl_probe(struct platform_device *pdev) mtk_desc.custom_conf_items = mtk_conf_items; #endif - hw->pctrl = devm_pinctrl_register(&pdev->dev, &mtk_desc, hw); - if (IS_ERR(hw->pctrl)) - return PTR_ERR(hw->pctrl); + err = devm_pinctrl_register_and_init(&pdev->dev, &mtk_desc, hw, + &hw->pctrl); + if (err) + return err; /* Setup groups descriptions per SoC types */ err = mtk_build_groups(hw); @@ -1713,11 +1714,19 @@ static int mtk_pinctrl_probe(struct platform_device *pdev) return err; } + /* For able to make pinctrl_claim_hogs, we must not enable pinctrl + * until all groups and functions are being added one. + */ + err = pinctrl_enable(hw->pctrl); + if (err) + return err; + err = mtk_build_eint(hw, pdev); if (err) dev_warn(&pdev->dev, "Failed to add EINT, but pinctrl still can work\n"); + /* Build gpiochip should be after pinctrl_enable is done */ err = mtk_build_gpiochip(hw, pdev->dev.of_node); if (err) { dev_err(&pdev->dev, "Failed to add gpio_chip\n"); -- cgit v1.2.3 From de227ed7965d06dcfcd06376e03c107004a4881c Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Fri, 22 Jun 2018 11:49:07 +0800 Subject: pinctrl: mt7622: stop using the deprecated pinctrl_add_gpio_range If the pinctrl node has the gpio-ranges property, the range will be added by the gpio core and doesn't need to be added by the pinctrl driver. But for keeping backward compatibility, an explicit pinctrl_add_gpio_range is still needed to be called when there is a missing gpio-ranges in pinctrl node in old dts files. Cc: stable@vger.kernel.org Fixes: d6ed93551320 ("pinctrl: mediatek: add pinctrl driver for MT7622 SoC") Signed-off-by: Sean Wang Signed-off-by: Linus Walleij --- drivers/pinctrl/mediatek/pinctrl-mt7622.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) diff --git a/drivers/pinctrl/mediatek/pinctrl-mt7622.c b/drivers/pinctrl/mediatek/pinctrl-mt7622.c index 42155d4e7f1b..055074bba246 100644 --- a/drivers/pinctrl/mediatek/pinctrl-mt7622.c +++ b/drivers/pinctrl/mediatek/pinctrl-mt7622.c @@ -1508,11 +1508,20 @@ static int mtk_build_gpiochip(struct mtk_pinctrl *hw, struct device_node *np) if (ret < 0) return ret; - ret = gpiochip_add_pin_range(chip, dev_name(hw->dev), 0, 0, - chip->ngpio); - if (ret < 0) { - gpiochip_remove(chip); - return ret; + /* Just for backward compatible for these old pinctrl nodes without + * "gpio-ranges" property. Otherwise, called directly from a + * DeviceTree-supported pinctrl driver is DEPRECATED. + * Please see Section 2.1 of + * Documentation/devicetree/bindings/gpio/gpio.txt on how to + * bind pinctrl and gpio drivers via the "gpio-ranges" property. + */ + if (!of_find_property(np, "gpio-ranges", NULL)) { + ret = gpiochip_add_pin_range(chip, dev_name(hw->dev), 0, 0, + chip->ngpio); + if (ret < 0) { + gpiochip_remove(chip); + return ret; + } } return 0; -- cgit v1.2.3 From 5b1c4bf2519efc2328d252fd7697bdfb306f10f3 Mon Sep 17 00:00:00 2001 From: Sean Wang Date: Fri, 22 Jun 2018 11:49:08 +0800 Subject: pinctrl: mt7622: fix a kernel panic when gpio-hog is being applied When we are explicitly using GPIO hogging mechanism in the pinctrl node, such as: &pio { line_input { gpio-hog; gpios = <95 0>, <96 0>, <97 0>; input; }; }; A kernel panic happens at dereferencing a NULL pointer: In this case, the drvdata is still not setup properly yet when it is being accessed. A better solution for fixing up this issue should be we should obtain the private data from struct gpio_chip using a specific gpiochip_get_data instead of a generic dev_get_drvdata. [ 0.249424] Unable to handle kernel NULL pointer dereference at virtual address 000000c8 [ 0.257818] Mem abort info: [ 0.260704] ESR = 0x96000005 [ 0.263869] Exception class = DABT (current EL), IL = 32 bits [ 0.270011] SET = 0, FnV = 0 [ 0.273167] EA = 0, S1PTW = 0 [ 0.276421] Data abort info: [ 0.279398] ISV = 0, ISS = 0x00000005 [ 0.283372] CM = 0, WnR = 0 [ 0.286440] [00000000000000c8] user address but active_mm is swapper [ 0.293027] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 0.298795] Modules linked in: [ 0.301958] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.16.0-rc1+ #389 [ 0.308716] Hardware name: MediaTek MT7622 RFB1 board (DT) [ 0.314396] pstate: 80000005 (Nzcv daif -PAN -UAO) [ 0.319362] pc : mtk_hw_pin_field_get+0x28/0x118 [ 0.324140] lr : mtk_hw_set_value+0x30/0x104 [ 0.328557] sp : ffffff800801b6d0 [ 0.331983] x29: ffffff800801b6d0 x28: ffffff80086b7970 [ 0.337484] x27: 0000000000000000 x26: ffffff80087b8000 [ 0.342986] x25: 0000000000000000 x24: ffffffc00324c230 [ 0.348487] x23: 0000000000000003 x22: 0000000000000000 [ 0.353988] x21: ffffff80087b8000 x20: 0000000000000000 [ 0.359489] x19: 0000000000000054 x18: 00000000fffff7c0 [ 0.364990] x17: 0000000000006300 x16: 000000000000003f [ 0.370492] x15: 000000000000000e x14: ffffffffffffffff [ 0.375993] x13: 0000000000000000 x12: 0000000000000020 [ 0.381494] x11: 0000000000000006 x10: 0101010101010101 [ 0.386995] x9 : fffffffffffffffa x8 : 0000000000000007 [ 0.392496] x7 : ffffff80085d63f8 x6 : 0000000000000003 [ 0.397997] x5 : 0000000000000054 x4 : ffffffc0031eb800 [ 0.403499] x3 : ffffff800801b728 x2 : 0000000000000003 [ 0.409000] x1 : 0000000000000054 x0 : 0000000000000000 [ 0.414502] Process swapper/0 (pid: 1, stack limit = 0x000000002a913c1c) [ 0.421441] Call trace: [ 0.423968] mtk_hw_pin_field_get+0x28/0x118 [ 0.428387] mtk_hw_set_value+0x30/0x104 [ 0.432445] mtk_gpio_set+0x20/0x28 [ 0.436052] mtk_gpio_direction_output+0x18/0x30 [ 0.440833] gpiod_direction_output_raw_commit+0x7c/0xa0 [ 0.446333] gpiod_direction_output+0x104/0x114 [ 0.451022] gpiod_configure_flags+0xbc/0xfc [ 0.455441] gpiod_hog+0x8c/0x140 [ 0.458869] of_gpiochip_add+0x27c/0x2d4 [ 0.462928] gpiochip_add_data_with_key+0x338/0x5f0 [ 0.467976] mtk_pinctrl_probe+0x388/0x400 [ 0.472217] platform_drv_probe+0x58/0xa4 [ 0.476365] driver_probe_device+0x204/0x44c [ 0.480783] __device_attach_driver+0xac/0x108 [ 0.485384] bus_for_each_drv+0x7c/0xac [ 0.489352] __device_attach+0xa0/0x144 [ 0.493320] device_initial_probe+0x10/0x18 [ 0.497647] bus_probe_device+0x2c/0x8c [ 0.501616] device_add+0x2f8/0x540 [ 0.505226] of_device_add+0x3c/0x44 [ 0.508925] of_platform_device_create_pdata+0x80/0xb8 [ 0.514245] of_platform_bus_create+0x290/0x3e8 [ 0.518933] of_platform_populate+0x78/0x100 [ 0.523352] of_platform_default_populate+0x24/0x2c [ 0.528403] of_platform_default_populate_init+0x94/0xa4 [ 0.533903] do_one_initcall+0x98/0x130 [ 0.537874] kernel_init_freeable+0x13c/0x1d4 [ 0.542385] kernel_init+0x10/0xf8 [ 0.545903] ret_from_fork+0x10/0x18 [ 0.549603] Code: 900020a1 f9400800 911dcc21 1400001f (f9406401) [ 0.555916] ---[ end trace de8c34787fdad3b3 ]--- [ 0.560722] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 0.560722] [ 0.570188] SMP: stopping secondary CPUs [ 0.574253] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 0.574253] Cc: stable@vger.kernel.org Fixes: d6ed93551320 ("pinctrl: mediatek: add pinctrl driver for MT7622 SoC") Signed-off-by: Sean Wang Signed-off-by: Linus Walleij --- drivers/pinctrl/mediatek/pinctrl-mt7622.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pinctrl/mediatek/pinctrl-mt7622.c b/drivers/pinctrl/mediatek/pinctrl-mt7622.c index 055074bba246..4c4740ffeb9c 100644 --- a/drivers/pinctrl/mediatek/pinctrl-mt7622.c +++ b/drivers/pinctrl/mediatek/pinctrl-mt7622.c @@ -1424,7 +1424,7 @@ static struct pinctrl_desc mtk_desc = { static int mtk_gpio_get(struct gpio_chip *chip, unsigned int gpio) { - struct mtk_pinctrl *hw = dev_get_drvdata(chip->parent); + struct mtk_pinctrl *hw = gpiochip_get_data(chip); int value, err; err = mtk_hw_get_value(hw, gpio, PINCTRL_PIN_REG_DI, &value); @@ -1436,7 +1436,7 @@ static int mtk_gpio_get(struct gpio_chip *chip, unsigned int gpio) static void mtk_gpio_set(struct gpio_chip *chip, unsigned int gpio, int value) { - struct mtk_pinctrl *hw = dev_get_drvdata(chip->parent); + struct mtk_pinctrl *hw = gpiochip_get_data(chip); mtk_hw_set_value(hw, gpio, PINCTRL_PIN_REG_DO, !!value); } -- cgit v1.2.3 From 0084a786ca8c84b443f67c4a697b4f2552761650 Mon Sep 17 00:00:00 2001 From: Paul Cercueil Date: Wed, 27 Jun 2018 13:49:02 +0200 Subject: pinctrl: ingenic: Fix inverted direction for < JZ4770 The .gpio_set_direction() callback was setting inverted direction for SoCs older than the JZ4770, this restores the correct behaviour. Signed-off-by: Paul Cercueil Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-ingenic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/pinctrl-ingenic.c b/drivers/pinctrl/pinctrl-ingenic.c index a1d7156d0a43..6a1b6058b991 100644 --- a/drivers/pinctrl/pinctrl-ingenic.c +++ b/drivers/pinctrl/pinctrl-ingenic.c @@ -536,7 +536,7 @@ static int ingenic_pinmux_gpio_set_direction(struct pinctrl_dev *pctldev, ingenic_config_pin(jzpc, pin, JZ4770_GPIO_PAT1, input); } else { ingenic_config_pin(jzpc, pin, JZ4740_GPIO_SELECT, false); - ingenic_config_pin(jzpc, pin, JZ4740_GPIO_DIR, input); + ingenic_config_pin(jzpc, pin, JZ4740_GPIO_DIR, !input); ingenic_config_pin(jzpc, pin, JZ4740_GPIO_FUNC, false); } -- cgit v1.2.3 From 550b6f7e8cf93fc2753aa01e655ed5471012ab5a Mon Sep 17 00:00:00 2001 From: Niklas Söderlund Date: Tue, 3 Jul 2018 17:18:42 +0200 Subject: pinctrl: sh-pfc: r8a77970: remove SH_PFC_PIN_CFG_DRIVE_STRENGTH flag MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The datasheet does not document any registers to control drive strength, and no drive strength registers are for this reason described for this SoC. The flags indicating that drive strength can be controlled are however set for some pins in the driver. This leads to a NULL pointer dereference when the sh-pfc core tries to access the struct describing the drive strength registers, for example when reading the sysfs file pinconf-pins. Fix this by removing the SH_PFC_PIN_CFG_DRIVE_STRENGTH from all pins. Fixes: b92ac66a1819602b ("pinctrl: sh-pfc: Add R8A77970 PFC support") Signed-off-by: Niklas Söderlund Reviewed-by: Simon Horman Reviewed-by: Sergei Shtylyov Reviewed-by: Geert Uytterhoeven Signed-off-by: Linus Walleij --- drivers/pinctrl/sh-pfc/pfc-r8a77970.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a77970.c b/drivers/pinctrl/sh-pfc/pfc-r8a77970.c index b02caf316711..eeb58b3bbc9a 100644 --- a/drivers/pinctrl/sh-pfc/pfc-r8a77970.c +++ b/drivers/pinctrl/sh-pfc/pfc-r8a77970.c @@ -21,15 +21,13 @@ #include "core.h" #include "sh_pfc.h" -#define CFG_FLAGS SH_PFC_PIN_CFG_DRIVE_STRENGTH - #define CPU_ALL_PORT(fn, sfx) \ - PORT_GP_CFG_22(0, fn, sfx, CFG_FLAGS | SH_PFC_PIN_CFG_IO_VOLTAGE), \ - PORT_GP_CFG_28(1, fn, sfx, CFG_FLAGS), \ - PORT_GP_CFG_17(2, fn, sfx, CFG_FLAGS | SH_PFC_PIN_CFG_IO_VOLTAGE), \ - PORT_GP_CFG_17(3, fn, sfx, CFG_FLAGS | SH_PFC_PIN_CFG_IO_VOLTAGE), \ - PORT_GP_CFG_6(4, fn, sfx, CFG_FLAGS), \ - PORT_GP_CFG_15(5, fn, sfx, CFG_FLAGS) + PORT_GP_CFG_22(0, fn, sfx, SH_PFC_PIN_CFG_IO_VOLTAGE), \ + PORT_GP_28(1, fn, sfx), \ + PORT_GP_CFG_17(2, fn, sfx, SH_PFC_PIN_CFG_IO_VOLTAGE), \ + PORT_GP_CFG_17(3, fn, sfx, SH_PFC_PIN_CFG_IO_VOLTAGE), \ + PORT_GP_6(4, fn, sfx), \ + PORT_GP_15(5, fn, sfx) /* * F_() : just information * FM() : macro for FN_xxx / xxx_MARK -- cgit v1.2.3 From f90a21c898db58eaea14b8ad7e9af3b9e15e5f8a Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 3 Jul 2018 15:04:25 +0300 Subject: pinctrl: nsp: off by ones in nsp_pinmux_enable() The > comparisons should be >= or else we read beyond the end of the pinctrl->functions[] array. Fixes: cc4fa83f66e9 ("pinctrl: nsp: add pinmux driver support for Broadcom NSP SoC") Signed-off-by: Dan Carpenter Reviewed-by: Ray Jui Signed-off-by: Linus Walleij --- drivers/pinctrl/bcm/pinctrl-nsp-mux.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pinctrl/bcm/pinctrl-nsp-mux.c b/drivers/pinctrl/bcm/pinctrl-nsp-mux.c index 35c17653c694..5cd8166fbbc8 100644 --- a/drivers/pinctrl/bcm/pinctrl-nsp-mux.c +++ b/drivers/pinctrl/bcm/pinctrl-nsp-mux.c @@ -460,8 +460,8 @@ static int nsp_pinmux_enable(struct pinctrl_dev *pctrl_dev, const struct nsp_pin_function *func; const struct nsp_pin_group *grp; - if (grp_select > pinctrl->num_groups || - func_select > pinctrl->num_functions) + if (grp_select >= pinctrl->num_groups || + func_select >= pinctrl->num_functions) return -EINVAL; func = &pinctrl->functions[func_select]; -- cgit v1.2.3 From c29e9da56bebb4c2c794e871b0dc0298bbf08142 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 11 Jul 2018 12:34:21 +0000 Subject: pinctrl: nsp: Fix potential NULL dereference platform_get_resource() may fail and return NULL, so we should better check it's return value to avoid a NULL pointer dereference a bit later in the code. This is detected by Coccinelle semantic patch. @@ expression pdev, res, n, t, e, e1, e2; @@ res = platform_get_resource(pdev, t, n); + if (!res) + return -EINVAL; ... when != res == NULL e = devm_ioremap_nocache(e1, res->start, e2); Fixes: cc4fa83f66e9 ("pinctrl: nsp: add pinmux driver support for Broadcom NSP SoC") Signed-off-by: Wei Yongjun Reviewed-by: Ray Jui Signed-off-by: Linus Walleij --- drivers/pinctrl/bcm/pinctrl-nsp-mux.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/pinctrl/bcm/pinctrl-nsp-mux.c b/drivers/pinctrl/bcm/pinctrl-nsp-mux.c index 5cd8166fbbc8..87618a4e90e4 100644 --- a/drivers/pinctrl/bcm/pinctrl-nsp-mux.c +++ b/drivers/pinctrl/bcm/pinctrl-nsp-mux.c @@ -577,6 +577,8 @@ static int nsp_pinmux_probe(struct platform_device *pdev) return PTR_ERR(pinctrl->base0); res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!res) + return -EINVAL; pinctrl->base1 = devm_ioremap_nocache(&pdev->dev, res->start, resource_size(res)); if (!pinctrl->base1) { -- cgit v1.2.3 From 6d77d3b43ad84a48b502f02dc618e7c36737bdfe Mon Sep 17 00:00:00 2001 From: Simon Ser Date: Mon, 9 Jul 2018 11:17:22 -0500 Subject: objtool: Use '.strtab' if '.shstrtab' doesn't exist, to support ORC tables on Clang Clang puts its section header names in the '.strtab' section instead of '.shstrtab', which causes objtool to fail with a "can't find .shstrtab section" warning when attempting to write ORC metadata to an object file. If '.shstrtab' doesn't exist, use '.strtab' instead. Signed-off-by: Simon Ser Signed-off-by: Josh Poimboeuf Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/d1c1c3fe55872be433da7bc5e1860538506229ba.1531153015.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar --- tools/objtool/elf.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/tools/objtool/elf.c b/tools/objtool/elf.c index 0d1acb704f64..7ec85d567598 100644 --- a/tools/objtool/elf.c +++ b/tools/objtool/elf.c @@ -519,10 +519,12 @@ struct section *elf_create_section(struct elf *elf, const char *name, sec->sh.sh_flags = SHF_ALLOC; - /* Add section name to .shstrtab */ + /* Add section name to .shstrtab (or .strtab for Clang) */ shstrtab = find_section_by_name(elf, ".shstrtab"); + if (!shstrtab) + shstrtab = find_section_by_name(elf, ".strtab"); if (!shstrtab) { - WARN("can't find .shstrtab section"); + WARN("can't find .shstrtab or .strtab section"); return NULL; } -- cgit v1.2.3 From 2c991e408df6a407476dbc453d725e1e975479e7 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Sat, 14 Jul 2018 12:58:07 -0700 Subject: x86/events/intel/ds: Fix bts_interrupt_threshold alignment Markus reported that BTS is sporadically missing the tail of the trace in the perf_event data buffer: [decode error (1): instruction overflow] shown in GDB; and bisected it to the conversion of debug_store to PTI. A little "optimization" crept into alloc_bts_buffer(), which mistakenly placed bts_interrupt_threshold away from the 24-byte record boundary. Intel SDM Vol 3B 17.4.9 says "This address must point to an offset from the BTS buffer base that is a multiple of the BTS record size." Revert "max" from a byte count to a record count, to calculate the bts_interrupt_threshold correctly: which turns out to fix problem seen. Fixes: c1961a4631da ("x86/events/intel/ds: Map debug buffers in cpu_entry_area") Reported-and-tested-by: Markus T Metzger Signed-off-by: Hugh Dickins Signed-off-by: Thomas Gleixner Cc: Peter Zijlstra Cc: Arnaldo Carvalho de Melo Cc: Alexander Shishkin Cc: Andi Kleen Cc: Dave Hansen Cc: Stephane Eranian Cc: stable@vger.kernel.org # v4.14+ Link: https://lkml.kernel.org/r/alpine.LSU.2.11.1807141248290.1614@eggly.anvils --- arch/x86/events/intel/ds.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/arch/x86/events/intel/ds.c b/arch/x86/events/intel/ds.c index 8a10a045b57b..8cf03f101938 100644 --- a/arch/x86/events/intel/ds.c +++ b/arch/x86/events/intel/ds.c @@ -408,9 +408,11 @@ static int alloc_bts_buffer(int cpu) ds->bts_buffer_base = (unsigned long) cea; ds_update_cea(cea, buffer, BTS_BUFFER_SIZE, PAGE_KERNEL); ds->bts_index = ds->bts_buffer_base; - max = BTS_RECORD_SIZE * (BTS_BUFFER_SIZE / BTS_RECORD_SIZE); - ds->bts_absolute_maximum = ds->bts_buffer_base + max; - ds->bts_interrupt_threshold = ds->bts_absolute_maximum - (max / 16); + max = BTS_BUFFER_SIZE / BTS_RECORD_SIZE; + ds->bts_absolute_maximum = ds->bts_buffer_base + + max * BTS_RECORD_SIZE; + ds->bts_interrupt_threshold = ds->bts_absolute_maximum - + (max / 16) * BTS_RECORD_SIZE; return 0; } -- cgit v1.2.3 From 9fb8d5dc4b649dd190e1af4ead670753e71bf907 Mon Sep 17 00:00:00 2001 From: "Isaac J. Manjarres" Date: Tue, 3 Jul 2018 15:02:14 -0700 Subject: stop_machine: Disable preemption when waking two stopper threads When cpu_stop_queue_two_works() begins to wake the stopper threads, it does so without preemption disabled, which leads to the following race condition: The source CPU calls cpu_stop_queue_two_works(), with cpu1 as the source CPU, and cpu2 as the destination CPU. When adding the stopper threads to the wake queue used in this function, the source CPU stopper thread is added first, and the destination CPU stopper thread is added last. When wake_up_q() is invoked to wake the stopper threads, the threads are woken up in the order that they are queued in, so the source CPU's stopper thread is woken up first, and it preempts the thread running on the source CPU. The stopper thread will then execute on the source CPU, disable preemption, and begin executing multi_cpu_stop(), and wait for an ack from the destination CPU's stopper thread, with preemption still disabled. Since the worker thread that woke up the stopper thread on the source CPU is affine to the source CPU, and preemption is disabled on the source CPU, that thread will never run to dequeue the destination CPU's stopper thread from the wake queue, and thus, the destination CPU's stopper thread will never run, causing the source CPU's stopper thread to wait forever, and stall. Disable preemption when waking the stopper threads in cpu_stop_queue_two_works(). Fixes: 0b26351b910f ("stop_machine, sched: Fix migrate_swap() vs. active_balance() deadlock") Co-Developed-by: Prasad Sodagudi Signed-off-by: Prasad Sodagudi Co-Developed-by: Pavankumar Kondeti Signed-off-by: Pavankumar Kondeti Signed-off-by: Isaac J. Manjarres Signed-off-by: Thomas Gleixner Cc: peterz@infradead.org Cc: matt@codeblueprint.co.uk Cc: bigeasy@linutronix.de Cc: gregkh@linuxfoundation.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1530655334-4601-1-git-send-email-isaacm@codeaurora.org --- kernel/stop_machine.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/kernel/stop_machine.c b/kernel/stop_machine.c index f89014a2c238..1ff523dae6e2 100644 --- a/kernel/stop_machine.c +++ b/kernel/stop_machine.c @@ -270,7 +270,11 @@ unlock: goto retry; } - wake_up_q(&wakeq); + if (!err) { + preempt_disable(); + wake_up_q(&wakeq); + preempt_enable(); + } return err; } -- cgit v1.2.3 From cd28325249a1ca0d771557ce823e0308ad629f98 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Mon, 25 Jun 2018 14:04:37 +0200 Subject: KVM: VMX: support MSR_IA32_ARCH_CAPABILITIES as a feature MSR This lets userspace read the MSR_IA32_ARCH_CAPABILITIES and check that all requested features are available on the host. Signed-off-by: Paolo Bonzini --- arch/x86/kvm/x86.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 71e7cda6d014..b91c1e1ff459 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -1092,6 +1092,7 @@ static u32 msr_based_features[] = { MSR_F10H_DECFG, MSR_IA32_UCODE_REV, + MSR_IA32_ARCH_CAPABILITIES, }; static unsigned int num_msr_based_features; @@ -1100,7 +1101,8 @@ static int kvm_get_msr_feature(struct kvm_msr_entry *msr) { switch (msr->index) { case MSR_IA32_UCODE_REV: - rdmsrl(msr->index, msr->data); + case MSR_IA32_ARCH_CAPABILITIES: + rdmsrl_safe(msr->index, &msr->data); break; default: if (kvm_x86_ops->get_msr_feature(msr)) -- cgit v1.2.3 From b062b794c7831a70bda4dfac202c1a9418e06ac0 Mon Sep 17 00:00:00 2001 From: Vitaly Kuznetsov Date: Wed, 11 Jul 2018 19:37:18 +0200 Subject: x86/kvm/vmx: don't read current->thread.{fs,gs}base of legacy tasks When we switched from doing rdmsr() to reading FS/GS base values from current->thread we completely forgot about legacy 32-bit userspaces which we still support in KVM (why?). task->thread.{fsbase,gsbase} are only synced for 64-bit processes, calling save_fsgs_for_kvm() and using its result from current is illegal for legacy processes. There's no ARCH_SET_FS/GS prctls for legacy applications. Base MSRs are, however, not always equal to zero. Intel's manual says (3.4.4 Segment Loading Instructions in IA-32e Mode): "In order to set up compatibility mode for an application, segment-load instructions (MOV to Sreg, POP Sreg) work normally in 64-bit mode. An entry is read from the system descriptor table (GDT or LDT) and is loaded in the hidden portion of the segment register. ... The hidden descriptor register fields for FS.base and GS.base are physically mapped to MSRs in order to load all address bits supported by a 64-bit implementation. " The issue was found by strace test suite where 32-bit ioctl_kvm_run test started segfaulting. Reported-by: Dmitry V. Levin Bisected-by: Masatake YAMATO Fixes: 42b933b59721 ("x86/kvm/vmx: read MSR_{FS,KERNEL_GS}_BASE from current->thread") Cc: stable@vger.kernel.org Signed-off-by: Vitaly Kuznetsov Signed-off-by: Paolo Bonzini --- arch/x86/kvm/vmx.c | 25 +++++++++++++++++-------- 1 file changed, 17 insertions(+), 8 deletions(-) diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 40aa29204baf..12ed6a8f6287 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -2365,6 +2365,7 @@ static void vmx_save_host_state(struct kvm_vcpu *vcpu) struct vcpu_vmx *vmx = to_vmx(vcpu); #ifdef CONFIG_X86_64 int cpu = raw_smp_processor_id(); + unsigned long fs_base, kernel_gs_base; #endif int i; @@ -2380,12 +2381,20 @@ static void vmx_save_host_state(struct kvm_vcpu *vcpu) vmx->host_state.gs_ldt_reload_needed = vmx->host_state.ldt_sel; #ifdef CONFIG_X86_64 - save_fsgs_for_kvm(); - vmx->host_state.fs_sel = current->thread.fsindex; - vmx->host_state.gs_sel = current->thread.gsindex; -#else - savesegment(fs, vmx->host_state.fs_sel); - savesegment(gs, vmx->host_state.gs_sel); + if (likely(is_64bit_mm(current->mm))) { + save_fsgs_for_kvm(); + vmx->host_state.fs_sel = current->thread.fsindex; + vmx->host_state.gs_sel = current->thread.gsindex; + fs_base = current->thread.fsbase; + kernel_gs_base = current->thread.gsbase; + } else { +#endif + savesegment(fs, vmx->host_state.fs_sel); + savesegment(gs, vmx->host_state.gs_sel); +#ifdef CONFIG_X86_64 + fs_base = read_msr(MSR_FS_BASE); + kernel_gs_base = read_msr(MSR_KERNEL_GS_BASE); + } #endif if (!(vmx->host_state.fs_sel & 7)) { vmcs_write16(HOST_FS_SELECTOR, vmx->host_state.fs_sel); @@ -2405,10 +2414,10 @@ static void vmx_save_host_state(struct kvm_vcpu *vcpu) savesegment(ds, vmx->host_state.ds_sel); savesegment(es, vmx->host_state.es_sel); - vmcs_writel(HOST_FS_BASE, current->thread.fsbase); + vmcs_writel(HOST_FS_BASE, fs_base); vmcs_writel(HOST_GS_BASE, cpu_kernelmode_gs_base(cpu)); - vmx->msr_host_kernel_gs_base = current->thread.gsbase; + vmx->msr_host_kernel_gs_base = kernel_gs_base; if (is_long_mode(&vmx->vcpu)) wrmsrl(MSR_KERNEL_GS_BASE, vmx->msr_guest_kernel_gs_base); #else -- cgit v1.2.3 From 0b88abdc3f964c28ec03bc69eb17cb6b3b034564 Mon Sep 17 00:00:00 2001 From: Jim Mattson Date: Wed, 30 May 2018 16:00:02 -0700 Subject: kvm: nVMX: Restore exit qual for VM-entry failure due to MSR loading This exit qualification was inadvertently dropped when the two VM-entry failure blocks were coalesced. Fixes: e79f245ddec1 ("X86/KVM: Properly update 'tsc_offset' to represent the running guest") Signed-off-by: Jim Mattson Reviewed-by: Krish Sadhukhan Reviewed-by: David Hildenbrand Signed-off-by: Paolo Bonzini --- arch/x86/kvm/vmx.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 12ed6a8f6287..ba981459d706 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -11431,7 +11431,6 @@ static int enter_vmx_non_root_mode(struct kvm_vcpu *vcpu, bool from_vmentry) { struct vcpu_vmx *vmx = to_vmx(vcpu); struct vmcs12 *vmcs12 = get_vmcs12(vcpu); - u32 msr_entry_idx; u32 exit_qual; int r; @@ -11453,10 +11452,10 @@ static int enter_vmx_non_root_mode(struct kvm_vcpu *vcpu, bool from_vmentry) nested_get_vmcs12_pages(vcpu, vmcs12); r = EXIT_REASON_MSR_LOAD_FAIL; - msr_entry_idx = nested_vmx_load_msr(vcpu, - vmcs12->vm_entry_msr_load_addr, - vmcs12->vm_entry_msr_load_count); - if (msr_entry_idx) + exit_qual = nested_vmx_load_msr(vcpu, + vmcs12->vm_entry_msr_load_addr, + vmcs12->vm_entry_msr_load_count); + if (exit_qual) goto fail; /* -- cgit v1.2.3 From d30f370d3a4998c13ed3e5c8ef607d05be0a987a Mon Sep 17 00:00:00 2001 From: Janakarajan Natarajan Date: Wed, 27 Jun 2018 11:30:53 -0500 Subject: x86/kvm/Kconfig: Ensure CRYPTO_DEV_CCP_DD state at minimum matches KVM_AMD Prevent a config where KVM_AMD=y and CRYPTO_DEV_CCP_DD=m thereby ensuring that AMD Secure Processor device driver will be built-in when KVM_AMD is also built-in. v1->v2: * Removed usage of 'imply' Kconfig option. * Change patch commit message. Fixes: 505c9e94d832 ("KVM: x86: prefer "depends on" to "select" for SEV") Cc: # 4.16.x Signed-off-by: Janakarajan Natarajan Reviewed-by: Brijesh Singh Signed-off-by: Paolo Bonzini --- arch/x86/kvm/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kvm/Kconfig b/arch/x86/kvm/Kconfig index 92fd433c50b9..1bbec387d289 100644 --- a/arch/x86/kvm/Kconfig +++ b/arch/x86/kvm/Kconfig @@ -85,7 +85,7 @@ config KVM_AMD_SEV def_bool y bool "AMD Secure Encrypted Virtualization (SEV) support" depends on KVM_AMD && X86_64 - depends on CRYPTO_DEV_CCP && CRYPTO_DEV_CCP_DD && CRYPTO_DEV_SP_PSP + depends on CRYPTO_DEV_SP_PSP && !(KVM_AMD=y && CRYPTO_DEV_CCP_DD=m) ---help--- Provides support for launching Encrypted VMs on AMD processors. -- cgit v1.2.3 From 94ffba484663ab3fc695ce2a34871e8c3db499f7 Mon Sep 17 00:00:00 2001 From: Radim Krčmář Date: Sun, 15 Jul 2018 17:43:11 +0200 Subject: x86/kvmclock: set pvti_cpu0_va after enabling kvmclock MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit pvti_cpu0_va is the address of shared kvmclock data structure. pvti_cpu0_va is currently kept unset (1) on 32 bit systems, (2) when kvmclock vsyscall is disabled, and (3) if kvmclock is not stable. This poses a problem, because kvm_ptp needs pvti_cpu0_va, but (1) can work on 32 bit, (2) has little relation to the vsyscall, and (3) does not need stable kvmclock (although kvmclock won't be used for system clock if it's not stable, so kvm_ptp is pointless in that case). Expose pvti_cpu0_va whenever kvmclock is enabled to allow all users to work with it. This fixes a regression found on Gentoo: https://bugs.gentoo.org/658544. Fixes: 9f08890ab906 ("x86/pvclock: add setter for pvclock_pvti_cpu0_va") Cc: stable@vger.kernel.org Reported-by: Andreas Steinmetz Signed-off-by: Radim Krčmář Signed-off-by: Paolo Bonzini --- arch/x86/kernel/kvmclock.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c index 8b26c9e01cc4..d79a18b4cf9d 100644 --- a/arch/x86/kernel/kvmclock.c +++ b/arch/x86/kernel/kvmclock.c @@ -319,6 +319,8 @@ void __init kvmclock_init(void) printk(KERN_INFO "kvm-clock: Using msrs %x and %x", msr_kvm_system_time, msr_kvm_wall_clock); + pvclock_set_pvti_cpu0_va(hv_clock); + if (kvm_para_has_feature(KVM_FEATURE_CLOCKSOURCE_STABLE_BIT)) pvclock_set_flags(PVCLOCK_TSC_STABLE_BIT); @@ -366,14 +368,11 @@ int __init kvm_setup_vsyscall_timeinfo(void) vcpu_time = &hv_clock[cpu].pvti; flags = pvclock_read_flags(vcpu_time); - if (!(flags & PVCLOCK_TSC_STABLE_BIT)) { - put_cpu(); - return 1; - } - - pvclock_set_pvti_cpu0_va(hv_clock); put_cpu(); + if (!(flags & PVCLOCK_TSC_STABLE_BIT)) + return 1; + kvm_clock.archdata.vclock_mode = VCLOCK_PVCLOCK; #endif return 0; -- cgit v1.2.3 From e117cb52bdb4d376b711bee34af6434c9e314b3b Mon Sep 17 00:00:00 2001 From: Juri Lelli Date: Wed, 11 Jul 2018 09:29:48 +0200 Subject: sched/deadline: Fix switched_from_dl() warning Mark noticed that syzkaller is able to reliably trigger the following warning: dl_rq->running_bw > dl_rq->this_bw WARNING: CPU: 1 PID: 153 at kernel/sched/deadline.c:124 switched_from_dl+0x454/0x608 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 153 Comm: syz-executor253 Not tainted 4.18.0-rc3+ #29 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x458 show_stack+0x20/0x30 dump_stack+0x180/0x250 panic+0x2dc/0x4ec __warn_printk+0x0/0x150 report_bug+0x228/0x2d8 bug_handler+0xa0/0x1a0 brk_handler+0x2f0/0x568 do_debug_exception+0x1bc/0x5d0 el1_dbg+0x18/0x78 switched_from_dl+0x454/0x608 __sched_setscheduler+0x8cc/0x2018 sys_sched_setattr+0x340/0x758 el0_svc_naked+0x30/0x34 syzkaller reproducer runs a bunch of threads that constantly switch between DEADLINE and NORMAL classes while interacting through futexes. The splat above is caused by the fact that if a DEADLINE task is setattr back to NORMAL while in non_contending state (blocked on a futex - inactive timer armed), its contribution to running_bw is not removed before sub_rq_bw() gets called (!task_on_rq_queued() branch) and the latter sees running_bw > this_bw. Fix it by removing a task contribution from running_bw if the task is not queued and in non_contending state while switched to a different class. Reported-by: Mark Rutland Signed-off-by: Juri Lelli Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Daniel Bristot de Oliveira Reviewed-by: Luca Abeni Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: claudio@evidence.eu.com Cc: rostedt@goodmis.org Link: http://lkml.kernel.org/r/20180711072948.27061-1-juri.lelli@redhat.com Signed-off-by: Ingo Molnar --- kernel/sched/deadline.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/kernel/sched/deadline.c b/kernel/sched/deadline.c index fbfc3f1d368a..10c7b51c0d1f 100644 --- a/kernel/sched/deadline.c +++ b/kernel/sched/deadline.c @@ -2290,8 +2290,17 @@ static void switched_from_dl(struct rq *rq, struct task_struct *p) if (task_on_rq_queued(p) && p->dl.dl_runtime) task_non_contending(p); - if (!task_on_rq_queued(p)) + if (!task_on_rq_queued(p)) { + /* + * Inactive timer is armed. However, p is leaving DEADLINE and + * might migrate away from this rq while continuing to run on + * some other class. We need to remove its contribution from + * this rq running_bw now, or sub_rq_bw (below) will complain. + */ + if (p->dl.dl_non_contending) + sub_running_bw(&p->dl, &rq->dl); sub_rq_bw(&p->dl, &rq->dl); + } /* * We cannot use inactive_task_timer() to invoke sub_running_bw() -- cgit v1.2.3 From bf3eeb9b5f2a1a05b3a68c6d82112babd58d6a39 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sun, 8 Jul 2018 13:46:02 -0700 Subject: lib/iov_iter: Document _copy_to_iter_mcsafe() Add some theory of operation documentation to _copy_to_iter_mcsafe(). Reported-by: Al Viro Signed-off-by: Dan Williams Cc: Andrew Morton Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Tony Luck Link: http://lkml.kernel.org/r/153108276256.37979.1689794213845539316.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Ingo Molnar --- lib/iov_iter.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/lib/iov_iter.c b/lib/iov_iter.c index 7e43cd54c84c..94fa361be7bb 100644 --- a/lib/iov_iter.c +++ b/lib/iov_iter.c @@ -596,6 +596,32 @@ static unsigned long memcpy_mcsafe_to_page(struct page *page, size_t offset, return ret; } +/** + * _copy_to_iter_mcsafe - copy to user with source-read error exception handling + * @addr: source kernel address + * @bytes: total transfer length + * @iter: destination iterator + * + * The pmem driver arranges for filesystem-dax to use this facility via + * dax_copy_to_iter() for protecting read/write to persistent memory. + * Unless / until an architecture can guarantee identical performance + * between _copy_to_iter_mcsafe() and _copy_to_iter() it would be a + * performance regression to switch more users to the mcsafe version. + * + * Otherwise, the main differences between this and typical _copy_to_iter(). + * + * * Typical tail/residue handling after a fault retries the copy + * byte-by-byte until the fault happens again. Re-triggering machine + * checks is potentially fatal so the implementation uses source + * alignment and poison alignment assumptions to avoid re-triggering + * hardware exceptions. + * + * * ITER_KVEC, ITER_PIPE, and ITER_BVEC can return short copies. + * Compare to copy_to_iter() where only ITER_IOVEC attempts might return + * a short copy. + * + * See MCSAFE_TEST for self-test. + */ size_t _copy_to_iter_mcsafe(const void *addr, size_t bytes, struct iov_iter *i) { const char *from = addr; -- cgit v1.2.3 From abd08d7d245397bcbded8c6c29ff79a36b3875b0 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sun, 8 Jul 2018 13:46:07 -0700 Subject: lib/iov_iter: Document _copy_to_iter_flushcache() Add some theory of operation documentation to _copy_to_iter_flushcache(). Reported-by: Al Viro Signed-off-by: Dan Williams Cc: Andrew Morton Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Tony Luck Link: http://lkml.kernel.org/r/153108276767.37979.9462477994086841699.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Ingo Molnar --- lib/iov_iter.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/lib/iov_iter.c b/lib/iov_iter.c index 94fa361be7bb..09fb73ad9d54 100644 --- a/lib/iov_iter.c +++ b/lib/iov_iter.c @@ -727,6 +727,20 @@ size_t _copy_from_iter_nocache(void *addr, size_t bytes, struct iov_iter *i) EXPORT_SYMBOL(_copy_from_iter_nocache); #ifdef CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE +/** + * _copy_from_iter_flushcache - write destination through cpu cache + * @addr: destination kernel address + * @bytes: total transfer length + * @iter: source iterator + * + * The pmem driver arranges for filesystem-dax to use this facility via + * dax_copy_from_iter() for ensuring that writes to persistent memory + * are flushed through the CPU cache. It is differentiated from + * _copy_from_iter_nocache() in that guarantees all data is flushed for + * all iterator types. The _copy_from_iter_nocache() only attempts to + * bypass the cache for the ITER_IOVEC case, and on some archs may use + * instructions that strand dirty-data in the cache. + */ size_t _copy_from_iter_flushcache(void *addr, size_t bytes, struct iov_iter *i) { char *to = addr; -- cgit v1.2.3 From ca146f6f091e47b3fd18d6a7e76ec0297d202e0f Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sun, 8 Jul 2018 13:46:12 -0700 Subject: lib/iov_iter: Fix pipe handling in _copy_to_iter_mcsafe() By mistake the ITER_PIPE early-exit / warning from copy_from_iter() was cargo-culted in _copy_to_iter_mcsafe() rather than a machine-check-safe version of copy_to_iter_pipe(). Implement copy_pipe_to_iter_mcsafe() being careful to return the indication of short copies due to a CPU exception. Without this regression-fix all splice reads to dax-mode files fail. Reported-by: Ross Zwisler Tested-by: Ross Zwisler Signed-off-by: Dan Williams Acked-by: Al Viro Cc: Andrew Morton Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Tony Luck Fixes: 8780356ef630 ("x86/asm/memcpy_mcsafe: Define copy_to_iter_mcsafe()") Link: http://lkml.kernel.org/r/153108277278.37979.3327916996902264102.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Ingo Molnar --- lib/iov_iter.c | 37 +++++++++++++++++++++++++++++++++---- 1 file changed, 33 insertions(+), 4 deletions(-) diff --git a/lib/iov_iter.c b/lib/iov_iter.c index 09fb73ad9d54..8be175df3075 100644 --- a/lib/iov_iter.c +++ b/lib/iov_iter.c @@ -596,6 +596,37 @@ static unsigned long memcpy_mcsafe_to_page(struct page *page, size_t offset, return ret; } +static size_t copy_pipe_to_iter_mcsafe(const void *addr, size_t bytes, + struct iov_iter *i) +{ + struct pipe_inode_info *pipe = i->pipe; + size_t n, off, xfer = 0; + int idx; + + if (!sanity(i)) + return 0; + + bytes = n = push_pipe(i, bytes, &idx, &off); + if (unlikely(!n)) + return 0; + for ( ; n; idx = next_idx(idx, pipe), off = 0) { + size_t chunk = min_t(size_t, n, PAGE_SIZE - off); + unsigned long rem; + + rem = memcpy_mcsafe_to_page(pipe->bufs[idx].page, off, addr, + chunk); + i->idx = idx; + i->iov_offset = off + chunk - rem; + xfer += chunk - rem; + if (rem) + break; + n -= chunk; + addr += chunk; + } + i->count -= xfer; + return xfer; +} + /** * _copy_to_iter_mcsafe - copy to user with source-read error exception handling * @addr: source kernel address @@ -627,10 +658,8 @@ size_t _copy_to_iter_mcsafe(const void *addr, size_t bytes, struct iov_iter *i) const char *from = addr; unsigned long rem, curr_addr, s_addr = (unsigned long) addr; - if (unlikely(i->type & ITER_PIPE)) { - WARN_ON(1); - return 0; - } + if (unlikely(i->type & ITER_PIPE)) + return copy_pipe_to_iter_mcsafe(addr, bytes, i); if (iter_is_iovec(i)) might_fault(); iterate_and_advance(i, bytes, v, -- cgit v1.2.3 From 092b31aa2048cf7561a39697974adcd147fbb27b Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sun, 8 Jul 2018 13:46:17 -0700 Subject: x86/asm/memcpy_mcsafe: Fix copy_to_user_mcsafe() exception handling All copy_to_user() implementations need to be prepared to handle faults accessing userspace. The __memcpy_mcsafe() implementation handles both mmu-faults on the user destination and machine-check-exceptions on the source buffer. However, the memcpy_mcsafe() wrapper may silently fallback to memcpy() depending on build options and cpu-capabilities. Force copy_to_user_mcsafe() to always use __memcpy_mcsafe() when available, and otherwise disable all of the copy_to_user_mcsafe() infrastructure when __memcpy_mcsafe() is not available, i.e. CONFIG_X86_MCE=n. This fixes crashes of the form: run fstests generic/323 at 2018-07-02 12:46:23 BUG: unable to handle kernel paging request at 00007f0d50001000 RIP: 0010:__memcpy+0x12/0x20 [..] Call Trace: copyout_mcsafe+0x3a/0x50 _copy_to_iter_mcsafe+0xa1/0x4a0 ? dax_alive+0x30/0x50 dax_iomap_actor+0x1f9/0x280 ? dax_iomap_rw+0x100/0x100 iomap_apply+0xba/0x130 ? dax_iomap_rw+0x100/0x100 dax_iomap_rw+0x95/0x100 ? dax_iomap_rw+0x100/0x100 xfs_file_dax_read+0x7b/0x1d0 [xfs] xfs_file_read_iter+0xa7/0xc0 [xfs] aio_read+0x11c/0x1a0 Reported-by: Ross Zwisler Tested-by: Ross Zwisler Signed-off-by: Dan Williams Cc: Al Viro Cc: Andrew Morton Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Tony Luck Fixes: 8780356ef630 ("x86/asm/memcpy_mcsafe: Define copy_to_iter_mcsafe()") Link: http://lkml.kernel.org/r/153108277790.37979.1486841789275803399.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Ingo Molnar --- arch/x86/Kconfig | 2 +- arch/x86/include/asm/uaccess_64.h | 7 ++++++- 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index f1dbb4ee19d7..887d3a7bb646 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -63,7 +63,7 @@ config X86 select ARCH_HAS_PTE_SPECIAL select ARCH_HAS_REFCOUNT select ARCH_HAS_UACCESS_FLUSHCACHE if X86_64 - select ARCH_HAS_UACCESS_MCSAFE if X86_64 + select ARCH_HAS_UACCESS_MCSAFE if X86_64 && X86_MCE select ARCH_HAS_SET_MEMORY select ARCH_HAS_SG_CHAIN select ARCH_HAS_STRICT_KERNEL_RWX diff --git a/arch/x86/include/asm/uaccess_64.h b/arch/x86/include/asm/uaccess_64.h index 62acb613114b..a9d637bc301d 100644 --- a/arch/x86/include/asm/uaccess_64.h +++ b/arch/x86/include/asm/uaccess_64.h @@ -52,7 +52,12 @@ copy_to_user_mcsafe(void *to, const void *from, unsigned len) unsigned long ret; __uaccess_begin(); - ret = memcpy_mcsafe(to, from, len); + /* + * Note, __memcpy_mcsafe() is explicitly used since it can + * handle exceptions / faults. memcpy_mcsafe() may fall back to + * memcpy() which lacks this handling. + */ + ret = __memcpy_mcsafe(to, from, len); __uaccess_end(); return ret; } -- cgit v1.2.3 From 1445cbe476fc3dd09c0b380b206526a49403c071 Mon Sep 17 00:00:00 2001 From: Lubomir Rintel Date: Tue, 10 Jul 2018 08:28:49 +0200 Subject: usb: cdc_acm: Add quirk for Castles VEGA3000 The device (a POS terminal) implements CDC ACM, but has not union descriptor. Signed-off-by: Lubomir Rintel Acked-by: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 998b32d0167e..75c4623ad779 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1831,6 +1831,9 @@ static const struct usb_device_id acm_ids[] = { { USB_DEVICE(0x09d8, 0x0320), /* Elatec GmbH TWN3 */ .driver_info = NO_UNION_NORMAL, /* has misplaced union descriptor */ }, + { USB_DEVICE(0x0ca6, 0xa050), /* Castles VEGA3000 */ + .driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */ + }, { USB_DEVICE(0x2912, 0x0001), /* ATOL FPrint */ .driver_info = CLEAR_HALT_CONDITIONS, -- cgit v1.2.3 From df0c97e2c7d06b4f3cc5855604af79fd1a964619 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Tue, 3 Jul 2018 10:52:34 +1000 Subject: drm/nouveau/kms/nv50-: ensure window updates are submitted when flushing mst disables It was possible for this to be skipped when shutting down MST streams, and leaving the core channel interlocked with a wndw channel update that never happens - leading to a hung display. Signed-off-by: Ben Skeggs Tested-By: Lyude Paul --- drivers/gpu/drm/nouveau/dispnv50/disp.c | 45 +++++++++++++++++++-------------- 1 file changed, 26 insertions(+), 19 deletions(-) diff --git a/drivers/gpu/drm/nouveau/dispnv50/disp.c b/drivers/gpu/drm/nouveau/dispnv50/disp.c index b83465ae7c1b..9382e99a0bc7 100644 --- a/drivers/gpu/drm/nouveau/dispnv50/disp.c +++ b/drivers/gpu/drm/nouveau/dispnv50/disp.c @@ -1585,8 +1585,9 @@ nv50_pior_create(struct drm_connector *connector, struct dcb_output *dcbe) *****************************************************************************/ static void -nv50_disp_atomic_commit_core(struct nouveau_drm *drm, u32 *interlock) +nv50_disp_atomic_commit_core(struct drm_atomic_state *state, u32 *interlock) { + struct nouveau_drm *drm = nouveau_drm(state->dev); struct nv50_disp *disp = nv50_disp(drm->dev); struct nv50_core *core = disp->core; struct nv50_mstm *mstm; @@ -1617,6 +1618,22 @@ nv50_disp_atomic_commit_core(struct nouveau_drm *drm, u32 *interlock) } } +static void +nv50_disp_atomic_commit_wndw(struct drm_atomic_state *state, u32 *interlock) +{ + struct drm_plane_state *new_plane_state; + struct drm_plane *plane; + int i; + + for_each_new_plane_in_state(state, plane, new_plane_state, i) { + struct nv50_wndw *wndw = nv50_wndw(plane); + if (interlock[wndw->interlock.type] & wndw->interlock.data) { + if (wndw->func->update) + wndw->func->update(wndw, interlock); + } + } +} + static void nv50_disp_atomic_commit_tail(struct drm_atomic_state *state) { @@ -1684,7 +1701,8 @@ nv50_disp_atomic_commit_tail(struct drm_atomic_state *state) help->disable(encoder); interlock[NV50_DISP_INTERLOCK_CORE] |= 1; if (outp->flush_disable) { - nv50_disp_atomic_commit_core(drm, interlock); + nv50_disp_atomic_commit_wndw(state, interlock); + nv50_disp_atomic_commit_core(state, interlock); memset(interlock, 0x00, sizeof(interlock)); } } @@ -1693,15 +1711,8 @@ nv50_disp_atomic_commit_tail(struct drm_atomic_state *state) /* Flush disable. */ if (interlock[NV50_DISP_INTERLOCK_CORE]) { if (atom->flush_disable) { - for_each_new_plane_in_state(state, plane, new_plane_state, i) { - struct nv50_wndw *wndw = nv50_wndw(plane); - if (interlock[wndw->interlock.type] & wndw->interlock.data) { - if (wndw->func->update) - wndw->func->update(wndw, interlock); - } - } - - nv50_disp_atomic_commit_core(drm, interlock); + nv50_disp_atomic_commit_wndw(state, interlock); + nv50_disp_atomic_commit_core(state, interlock); memset(interlock, 0x00, sizeof(interlock)); } } @@ -1762,18 +1773,14 @@ nv50_disp_atomic_commit_tail(struct drm_atomic_state *state) } /* Flush update. */ - for_each_new_plane_in_state(state, plane, new_plane_state, i) { - struct nv50_wndw *wndw = nv50_wndw(plane); - if (interlock[wndw->interlock.type] & wndw->interlock.data) { - if (wndw->func->update) - wndw->func->update(wndw, interlock); - } - } + nv50_disp_atomic_commit_wndw(state, interlock); if (interlock[NV50_DISP_INTERLOCK_CORE]) { if (interlock[NV50_DISP_INTERLOCK_BASE] || + interlock[NV50_DISP_INTERLOCK_OVLY] || + interlock[NV50_DISP_INTERLOCK_WNDW] || !atom->state.legacy_cursor_update) - nv50_disp_atomic_commit_core(drm, interlock); + nv50_disp_atomic_commit_core(state, interlock); else disp->core->func->update(disp->core, interlock, false); } -- cgit v1.2.3 From 7f073d011f93e92d4d225526b9ab6b8b0bbd6613 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 3 Jul 2018 15:30:56 +0300 Subject: drm/nouveau/gem: off by one bugs in nouveau_gem_pushbuf_reloc_apply() The bo array has req->nr_buffers elements so the > should be >= so we don't read beyond the end of the array. Fixes: a1606a9596e5 ("drm/nouveau: new gem pushbuf interface, bump to 0.0.16") Signed-off-by: Dan Carpenter Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_gem.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_gem.c b/drivers/gpu/drm/nouveau/nouveau_gem.c index 300daee74209..e6ccafcb9c41 100644 --- a/drivers/gpu/drm/nouveau/nouveau_gem.c +++ b/drivers/gpu/drm/nouveau/nouveau_gem.c @@ -616,7 +616,7 @@ nouveau_gem_pushbuf_reloc_apply(struct nouveau_cli *cli, struct nouveau_bo *nvbo; uint32_t data; - if (unlikely(r->bo_index > req->nr_buffers)) { + if (unlikely(r->bo_index >= req->nr_buffers)) { NV_PRINTK(err, cli, "reloc bo index invalid\n"); ret = -EINVAL; break; @@ -626,7 +626,7 @@ nouveau_gem_pushbuf_reloc_apply(struct nouveau_cli *cli, if (b->presumed.valid) continue; - if (unlikely(r->reloc_bo_index > req->nr_buffers)) { + if (unlikely(r->reloc_bo_index >= req->nr_buffers)) { NV_PRINTK(err, cli, "reloc container bo index invalid\n"); ret = -EINVAL; break; -- cgit v1.2.3 From 22b76bbe089cd901f5260ecb9a3dc41f9edb97a0 Mon Sep 17 00:00:00 2001 From: Lyude Paul Date: Fri, 13 Jul 2018 13:06:32 -0400 Subject: drm/nouveau: Use drm_connector_list_iter_* for iterating connectors Every codepath in nouveau that loops through the connector list currently does so using the old method, which is prone to race conditions from MST connectors being created and destroyed. This has been causing a multitude of problems, including memory corruption from trying to access connectors that have already been freed! Signed-off-by: Lyude Paul Cc: stable@vger.kernel.org Cc: Karol Herbst Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_backlight.c | 6 ++++-- drivers/gpu/drm/nouveau/nouveau_connector.c | 9 +++++++-- drivers/gpu/drm/nouveau/nouveau_connector.h | 14 ++++++++++---- drivers/gpu/drm/nouveau/nouveau_display.c | 10 ++++++++-- 4 files changed, 29 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_backlight.c b/drivers/gpu/drm/nouveau/nouveau_backlight.c index debbbf0fd4bd..408b955e5c39 100644 --- a/drivers/gpu/drm/nouveau/nouveau_backlight.c +++ b/drivers/gpu/drm/nouveau/nouveau_backlight.c @@ -267,6 +267,7 @@ nouveau_backlight_init(struct drm_device *dev) struct nouveau_drm *drm = nouveau_drm(dev); struct nvif_device *device = &drm->client.device; struct drm_connector *connector; + struct drm_connector_list_iter conn_iter; INIT_LIST_HEAD(&drm->bl_connectors); @@ -275,7 +276,8 @@ nouveau_backlight_init(struct drm_device *dev) return 0; } - list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + drm_connector_list_iter_begin(dev, &conn_iter); + drm_for_each_connector_iter(connector, &conn_iter) { if (connector->connector_type != DRM_MODE_CONNECTOR_LVDS && connector->connector_type != DRM_MODE_CONNECTOR_eDP) continue; @@ -292,7 +294,7 @@ nouveau_backlight_init(struct drm_device *dev) break; } } - + drm_connector_list_iter_end(&conn_iter); return 0; } diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c index 7b557c354307..7dc380449232 100644 --- a/drivers/gpu/drm/nouveau/nouveau_connector.c +++ b/drivers/gpu/drm/nouveau/nouveau_connector.c @@ -1208,14 +1208,19 @@ nouveau_connector_create(struct drm_device *dev, int index) struct nouveau_display *disp = nouveau_display(dev); struct nouveau_connector *nv_connector = NULL; struct drm_connector *connector; + struct drm_connector_list_iter conn_iter; int type, ret = 0; bool dummy; - list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + drm_connector_list_iter_begin(dev, &conn_iter); + drm_for_each_connector_iter(connector, &conn_iter) { nv_connector = nouveau_connector(connector); - if (nv_connector->index == index) + if (nv_connector->index == index) { + drm_connector_list_iter_end(&conn_iter); return connector; + } } + drm_connector_list_iter_end(&conn_iter); nv_connector = kzalloc(sizeof(*nv_connector), GFP_KERNEL); if (!nv_connector) diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.h b/drivers/gpu/drm/nouveau/nouveau_connector.h index a4d1a059bd3d..a8cbb4b56fc7 100644 --- a/drivers/gpu/drm/nouveau/nouveau_connector.h +++ b/drivers/gpu/drm/nouveau/nouveau_connector.h @@ -65,14 +65,20 @@ nouveau_crtc_connector_get(struct nouveau_crtc *nv_crtc) { struct drm_device *dev = nv_crtc->base.dev; struct drm_connector *connector; + struct drm_connector_list_iter conn_iter; + struct nouveau_connector *nv_connector = NULL; struct drm_crtc *crtc = to_drm_crtc(nv_crtc); - list_for_each_entry(connector, &dev->mode_config.connector_list, head) { - if (connector->encoder && connector->encoder->crtc == crtc) - return nouveau_connector(connector); + drm_connector_list_iter_begin(dev, &conn_iter); + drm_for_each_connector_iter(connector, &conn_iter) { + if (connector->encoder && connector->encoder->crtc == crtc) { + nv_connector = nouveau_connector(connector); + break; + } } + drm_connector_list_iter_end(&conn_iter); - return NULL; + return nv_connector; } struct drm_connector * diff --git a/drivers/gpu/drm/nouveau/nouveau_display.c b/drivers/gpu/drm/nouveau/nouveau_display.c index 774b429142bc..46b8430ef4aa 100644 --- a/drivers/gpu/drm/nouveau/nouveau_display.c +++ b/drivers/gpu/drm/nouveau/nouveau_display.c @@ -404,6 +404,7 @@ nouveau_display_init(struct drm_device *dev) struct nouveau_display *disp = nouveau_display(dev); struct nouveau_drm *drm = nouveau_drm(dev); struct drm_connector *connector; + struct drm_connector_list_iter conn_iter; int ret; ret = disp->init(dev); @@ -411,10 +412,12 @@ nouveau_display_init(struct drm_device *dev) return ret; /* enable hotplug interrupts */ - list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + drm_connector_list_iter_begin(dev, &conn_iter); + drm_for_each_connector_iter(connector, &conn_iter) { struct nouveau_connector *conn = nouveau_connector(connector); nvif_notify_get(&conn->hpd); } + drm_connector_list_iter_end(&conn_iter); /* enable flip completion events */ nvif_notify_get(&drm->flip); @@ -427,6 +430,7 @@ nouveau_display_fini(struct drm_device *dev, bool suspend) struct nouveau_display *disp = nouveau_display(dev); struct nouveau_drm *drm = nouveau_drm(dev); struct drm_connector *connector; + struct drm_connector_list_iter conn_iter; if (!suspend) { if (drm_drv_uses_atomic_modeset(dev)) @@ -439,10 +443,12 @@ nouveau_display_fini(struct drm_device *dev, bool suspend) nvif_notify_put(&drm->flip); /* disable hotplug interrupts */ - list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + drm_connector_list_iter_begin(dev, &conn_iter); + drm_for_each_connector_iter(connector, &conn_iter) { struct nouveau_connector *conn = nouveau_connector(connector); nvif_notify_put(&conn->hpd); } + drm_connector_list_iter_end(&conn_iter); drm_kms_helper_poll_disable(dev); disp->fini(dev); -- cgit v1.2.3 From 37afe55b4ae0600deafe7c0e0e658593c4754f1b Mon Sep 17 00:00:00 2001 From: Lyude Paul Date: Fri, 13 Jul 2018 13:06:33 -0400 Subject: drm/nouveau: Avoid looping through fake MST connectors When MST and atomic were introduced to nouveau, another structure that could contain a drm_connector embedded within it was introduced; struct nv50_mstc. This meant that we no longer would be able to simply loop through our connector list and assume that nouveau_connector() would return a proper pointer for each connector, since the assertion that all connectors coming from nouveau have a full nouveau_connector struct became invalid. Unfortunately, none of the actual code that looped through connectors ever got updated, which means that we've been causing invalid memory accesses for quite a while now. An example that was caught by KASAN: [ 201.038698] ================================================================== [ 201.038792] BUG: KASAN: slab-out-of-bounds in nvif_notify_get+0x190/0x1a0 [nouveau] [ 201.038797] Read of size 4 at addr ffff88076738c650 by task kworker/0:3/718 [ 201.038800] [ 201.038822] CPU: 0 PID: 718 Comm: kworker/0:3 Tainted: G O 4.18.0-rc4Lyude-Test+ #1 [ 201.038825] Hardware name: LENOVO 20EQS64N0B/20EQS64N0B, BIOS N1EET78W (1.51 ) 05/18/2018 [ 201.038882] Workqueue: events nouveau_display_hpd_work [nouveau] [ 201.038887] Call Trace: [ 201.038894] dump_stack+0xa4/0xfd [ 201.038900] print_address_description+0x71/0x239 [ 201.038929] ? nvif_notify_get+0x190/0x1a0 [nouveau] [ 201.038935] kasan_report.cold.6+0x242/0x2fe [ 201.038942] __asan_report_load4_noabort+0x19/0x20 [ 201.038970] nvif_notify_get+0x190/0x1a0 [nouveau] [ 201.038998] ? nvif_notify_put+0x1f0/0x1f0 [nouveau] [ 201.039003] ? kmsg_dump_rewind_nolock+0xe4/0xe4 [ 201.039049] nouveau_display_init.cold.12+0x34/0x39 [nouveau] [ 201.039089] ? nouveau_user_framebuffer_create+0x120/0x120 [nouveau] [ 201.039133] nouveau_display_resume+0x5c0/0x810 [nouveau] [ 201.039173] ? nvkm_client_ioctl+0x20/0x20 [nouveau] [ 201.039215] nouveau_do_resume+0x19f/0x570 [nouveau] [ 201.039256] nouveau_pmops_runtime_resume+0xd8/0x2a0 [nouveau] [ 201.039264] pci_pm_runtime_resume+0x130/0x250 [ 201.039269] ? pci_restore_standard_config+0x70/0x70 [ 201.039275] __rpm_callback+0x1f2/0x5d0 [ 201.039279] ? rpm_resume+0x560/0x18a0 [ 201.039283] ? pci_restore_standard_config+0x70/0x70 [ 201.039287] ? pci_restore_standard_config+0x70/0x70 [ 201.039291] ? pci_restore_standard_config+0x70/0x70 [ 201.039296] rpm_callback+0x175/0x210 [ 201.039300] ? pci_restore_standard_config+0x70/0x70 [ 201.039305] rpm_resume+0xcc3/0x18a0 [ 201.039312] ? rpm_callback+0x210/0x210 [ 201.039317] ? __pm_runtime_resume+0x9e/0x100 [ 201.039322] ? kasan_check_write+0x14/0x20 [ 201.039326] ? do_raw_spin_lock+0xc2/0x1c0 [ 201.039333] __pm_runtime_resume+0xac/0x100 [ 201.039374] nouveau_display_hpd_work+0x67/0x1f0 [nouveau] [ 201.039380] process_one_work+0x7a0/0x14d0 [ 201.039388] ? cancel_delayed_work_sync+0x20/0x20 [ 201.039392] ? lock_acquire+0x113/0x310 [ 201.039398] ? kasan_check_write+0x14/0x20 [ 201.039402] ? do_raw_spin_lock+0xc2/0x1c0 [ 201.039409] worker_thread+0x86/0xb50 [ 201.039418] kthread+0x2e9/0x3a0 [ 201.039422] ? process_one_work+0x14d0/0x14d0 [ 201.039426] ? kthread_create_worker_on_cpu+0xc0/0xc0 [ 201.039431] ret_from_fork+0x3a/0x50 [ 201.039441] [ 201.039444] Allocated by task 79: [ 201.039449] save_stack+0x43/0xd0 [ 201.039452] kasan_kmalloc+0xc4/0xe0 [ 201.039456] kmem_cache_alloc_trace+0x10a/0x260 [ 201.039494] nv50_mstm_add_connector+0x9a/0x340 [nouveau] [ 201.039504] drm_dp_add_port+0xff5/0x1fc0 [drm_kms_helper] [ 201.039511] drm_dp_send_link_address+0x4a7/0x740 [drm_kms_helper] [ 201.039518] drm_dp_check_and_send_link_address+0x1a7/0x210 [drm_kms_helper] [ 201.039525] drm_dp_mst_link_probe_work+0x71/0xb0 [drm_kms_helper] [ 201.039529] process_one_work+0x7a0/0x14d0 [ 201.039533] worker_thread+0x86/0xb50 [ 201.039537] kthread+0x2e9/0x3a0 [ 201.039541] ret_from_fork+0x3a/0x50 [ 201.039543] [ 201.039546] Freed by task 0: [ 201.039549] (stack is not available) [ 201.039551] [ 201.039555] The buggy address belongs to the object at ffff88076738c1a8 which belongs to the cache kmalloc-2048 of size 2048 [ 201.039559] The buggy address is located 1192 bytes inside of 2048-byte region [ffff88076738c1a8, ffff88076738c9a8) [ 201.039563] The buggy address belongs to the page: [ 201.039567] page:ffffea001d9ce200 count:1 mapcount:0 mapping:ffff88084000d0c0 index:0x0 compound_mapcount: 0 [ 201.039573] flags: 0x8000000000008100(slab|head) [ 201.039578] raw: 8000000000008100 ffffea001da3be08 ffffea001da25a08 ffff88084000d0c0 [ 201.039582] raw: 0000000000000000 00000000000d000d 00000001ffffffff 0000000000000000 [ 201.039585] page dumped because: kasan: bad access detected [ 201.039588] [ 201.039591] Memory state around the buggy address: [ 201.039594] ffff88076738c500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 201.039598] ffff88076738c580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 201.039601] >ffff88076738c600: 00 00 00 00 00 00 00 00 00 00 fc fc fc fc fc fc [ 201.039604] ^ [ 201.039607] ffff88076738c680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 201.039611] ffff88076738c700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 201.039613] ================================================================== Signed-off-by: Lyude Paul Cc: stable@vger.kernel.org Cc: Karol Herbst Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_connector.c | 2 +- drivers/gpu/drm/nouveau/nouveau_connector.h | 24 +++++++++++++++++++++++- drivers/gpu/drm/nouveau/nouveau_display.c | 4 ++-- 3 files changed, 26 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c index 7dc380449232..af68eae4c626 100644 --- a/drivers/gpu/drm/nouveau/nouveau_connector.c +++ b/drivers/gpu/drm/nouveau/nouveau_connector.c @@ -1213,7 +1213,7 @@ nouveau_connector_create(struct drm_device *dev, int index) bool dummy; drm_connector_list_iter_begin(dev, &conn_iter); - drm_for_each_connector_iter(connector, &conn_iter) { + nouveau_for_each_non_mst_connector_iter(connector, &conn_iter) { nv_connector = nouveau_connector(connector); if (nv_connector->index == index) { drm_connector_list_iter_end(&conn_iter); diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.h b/drivers/gpu/drm/nouveau/nouveau_connector.h index a8cbb4b56fc7..dc7454e7f19a 100644 --- a/drivers/gpu/drm/nouveau/nouveau_connector.h +++ b/drivers/gpu/drm/nouveau/nouveau_connector.h @@ -33,6 +33,7 @@ #include #include #include "nouveau_crtc.h" +#include "nouveau_encoder.h" struct nvkm_i2c_port; @@ -60,6 +61,27 @@ static inline struct nouveau_connector *nouveau_connector( return container_of(con, struct nouveau_connector, base); } +static inline bool +nouveau_connector_is_mst(struct drm_connector *connector) +{ + const struct nouveau_encoder *nv_encoder; + const struct drm_encoder *encoder; + + if (connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort) + return false; + + nv_encoder = find_encoder(connector, DCB_OUTPUT_ANY); + if (!nv_encoder) + return false; + + encoder = &nv_encoder->base.base; + return encoder->encoder_type == DRM_MODE_ENCODER_DPMST; +} + +#define nouveau_for_each_non_mst_connector_iter(connector, iter) \ + drm_for_each_connector_iter(connector, iter) \ + for_each_if(!nouveau_connector_is_mst(connector)) + static inline struct nouveau_connector * nouveau_crtc_connector_get(struct nouveau_crtc *nv_crtc) { @@ -70,7 +92,7 @@ nouveau_crtc_connector_get(struct nouveau_crtc *nv_crtc) struct drm_crtc *crtc = to_drm_crtc(nv_crtc); drm_connector_list_iter_begin(dev, &conn_iter); - drm_for_each_connector_iter(connector, &conn_iter) { + nouveau_for_each_non_mst_connector_iter(connector, &conn_iter) { if (connector->encoder && connector->encoder->crtc == crtc) { nv_connector = nouveau_connector(connector); break; diff --git a/drivers/gpu/drm/nouveau/nouveau_display.c b/drivers/gpu/drm/nouveau/nouveau_display.c index 46b8430ef4aa..ec7861457b84 100644 --- a/drivers/gpu/drm/nouveau/nouveau_display.c +++ b/drivers/gpu/drm/nouveau/nouveau_display.c @@ -413,7 +413,7 @@ nouveau_display_init(struct drm_device *dev) /* enable hotplug interrupts */ drm_connector_list_iter_begin(dev, &conn_iter); - drm_for_each_connector_iter(connector, &conn_iter) { + nouveau_for_each_non_mst_connector_iter(connector, &conn_iter) { struct nouveau_connector *conn = nouveau_connector(connector); nvif_notify_get(&conn->hpd); } @@ -444,7 +444,7 @@ nouveau_display_fini(struct drm_device *dev, bool suspend) /* disable hotplug interrupts */ drm_connector_list_iter_begin(dev, &conn_iter); - drm_for_each_connector_iter(connector, &conn_iter) { + nouveau_for_each_non_mst_connector_iter(connector, &conn_iter) { struct nouveau_connector *conn = nouveau_connector(connector); nvif_notify_put(&conn->hpd); } -- cgit v1.2.3 From e5d54f1935722f83df7619f3978f774c2b802cd8 Mon Sep 17 00:00:00 2001 From: Lyude Paul Date: Thu, 12 Jul 2018 13:02:53 -0400 Subject: drm/nouveau/drm/nouveau: Fix runtime PM leak in nv50_disp_atomic_commit() A CRTC being enabled doesn't mean it's on! It doesn't even necessarily mean it's being used. This fixes runtime PM leaks on the P50 I've got next to me. Signed-off-by: Lyude Paul Cc: stable@vger.kernel.org Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/dispnv50/disp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/dispnv50/disp.c b/drivers/gpu/drm/nouveau/dispnv50/disp.c index 9382e99a0bc7..31b12b4f321a 100644 --- a/drivers/gpu/drm/nouveau/dispnv50/disp.c +++ b/drivers/gpu/drm/nouveau/dispnv50/disp.c @@ -1878,7 +1878,7 @@ nv50_disp_atomic_commit(struct drm_device *dev, nv50_disp_atomic_commit_tail(state); drm_for_each_crtc(crtc, dev) { - if (crtc->state->enable) { + if (crtc->state->active) { if (!drm->have_disp_power_ref) { drm->have_disp_power_ref = true; return 0; -- cgit v1.2.3 From 68fe23a626b67b56c912c496ea43ed537ea9708f Mon Sep 17 00:00:00 2001 From: Lyude Paul Date: Thu, 12 Jul 2018 13:02:54 -0400 Subject: drm/nouveau: Remove bogus crtc check in pmops_runtime_idle This both uses the legacy modesetting structures in a racy manner, and additionally also doesn't even check the right variable (enabled != the CRTC is actually turned on for atomic). This fixes issues on my P50 regarding the dedicated GPU not entering runtime suspend. Signed-off-by: Lyude Paul Cc: stable@vger.kernel.org Reviewed-by: Daniel Vetter Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_drm.c | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c b/drivers/gpu/drm/nouveau/nouveau_drm.c index 775443c9af94..514903338782 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drm.c +++ b/drivers/gpu/drm/nouveau/nouveau_drm.c @@ -874,22 +874,11 @@ nouveau_pmops_runtime_resume(struct device *dev) static int nouveau_pmops_runtime_idle(struct device *dev) { - struct pci_dev *pdev = to_pci_dev(dev); - struct drm_device *drm_dev = pci_get_drvdata(pdev); - struct nouveau_drm *drm = nouveau_drm(drm_dev); - struct drm_crtc *crtc; - if (!nouveau_pmops_runtime()) { pm_runtime_forbid(dev); return -EBUSY; } - list_for_each_entry(crtc, &drm->dev->mode_config.crtc_list, head) { - if (crtc->enabled) { - DRM_DEBUG_DRIVER("failing to power off - crtc active\n"); - return -EBUSY; - } - } pm_runtime_mark_last_busy(dev); pm_runtime_autosuspend(dev); /* we don't want the main rpm_idle to call suspend - we want to autosuspend */ -- cgit v1.2.3 From eb493fbc150f4a28151ae1ee84f24395989f3600 Mon Sep 17 00:00:00 2001 From: Lyude Paul Date: Tue, 3 Jul 2018 16:31:41 -0400 Subject: drm/nouveau: Set DRIVER_ATOMIC cap earlier to fix debugfs Currently nouveau doesn't actually expose the state debugfs file that's usually provided for any modesetting driver that supports atomic, even if nouveau is loaded with atomic=1. This is due to the fact that the standard debugfs files that DRM creates for atomic drivers is called when drm_get_pci_dev() is called from nouveau_drm.c. This happens well before we've initialized the display core, which is currently responsible for setting the DRIVER_ATOMIC cap. So, move the atomic option into nouveau_drm.c and just add the DRIVER_ATOMIC cap whenever it's enabled on the kernel commandline. This shouldn't cause any actual issues, as the atomic ioctl will still fail as expected even if the display core doesn't disable it until later in the init sequence. This also provides the added benefit of being able to use the state debugfs file to check the current display state even if clients aren't allowed to modify it through anything other than the legacy ioctls. Additionally, disable the DRIVER_ATOMIC cap in nv04's display core, as this was already disabled there previously. Signed-off-by: Lyude Paul Cc: stable@vger.kernel.org Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/dispnv04/disp.c | 3 +++ drivers/gpu/drm/nouveau/dispnv50/disp.c | 6 ------ drivers/gpu/drm/nouveau/nouveau_drm.c | 7 +++++++ 3 files changed, 10 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/nouveau/dispnv04/disp.c b/drivers/gpu/drm/nouveau/dispnv04/disp.c index 501d2d290e9c..70dce544984e 100644 --- a/drivers/gpu/drm/nouveau/dispnv04/disp.c +++ b/drivers/gpu/drm/nouveau/dispnv04/disp.c @@ -55,6 +55,9 @@ nv04_display_create(struct drm_device *dev) nouveau_display(dev)->init = nv04_display_init; nouveau_display(dev)->fini = nv04_display_fini; + /* Pre-nv50 doesn't support atomic, so don't expose the ioctls */ + dev->driver->driver_features &= ~DRIVER_ATOMIC; + nouveau_hw_save_vga_fonts(dev, 1); nv04_crtc_create(dev, 0); diff --git a/drivers/gpu/drm/nouveau/dispnv50/disp.c b/drivers/gpu/drm/nouveau/dispnv50/disp.c index 31b12b4f321a..9bae4db84cfb 100644 --- a/drivers/gpu/drm/nouveau/dispnv50/disp.c +++ b/drivers/gpu/drm/nouveau/dispnv50/disp.c @@ -2126,10 +2126,6 @@ nv50_display_destroy(struct drm_device *dev) kfree(disp); } -MODULE_PARM_DESC(atomic, "Expose atomic ioctl (default: disabled)"); -static int nouveau_atomic = 0; -module_param_named(atomic, nouveau_atomic, int, 0400); - int nv50_display_create(struct drm_device *dev) { @@ -2154,8 +2150,6 @@ nv50_display_create(struct drm_device *dev) disp->disp = &nouveau_display(dev)->disp; dev->mode_config.funcs = &nv50_disp_func; dev->driver->driver_features |= DRIVER_PREFER_XBGR_30BPP; - if (nouveau_atomic) - dev->driver->driver_features |= DRIVER_ATOMIC; /* small shared memory area we use for notifiers and semaphores */ ret = nouveau_bo_new(&drm->client, 4096, 0x1000, TTM_PL_FLAG_VRAM, diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c b/drivers/gpu/drm/nouveau/nouveau_drm.c index 514903338782..f5d3158f0378 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drm.c +++ b/drivers/gpu/drm/nouveau/nouveau_drm.c @@ -81,6 +81,10 @@ MODULE_PARM_DESC(modeset, "enable driver (default: auto, " int nouveau_modeset = -1; module_param_named(modeset, nouveau_modeset, int, 0400); +MODULE_PARM_DESC(atomic, "Expose atomic ioctl (default: disabled)"); +static int nouveau_atomic = 0; +module_param_named(atomic, nouveau_atomic, int, 0400); + MODULE_PARM_DESC(runpm, "disable (0), force enable (1), optimus only default (-1)"); static int nouveau_runtime_pm = -1; module_param_named(runpm, nouveau_runtime_pm, int, 0400); @@ -509,6 +513,9 @@ static int nouveau_drm_probe(struct pci_dev *pdev, pci_set_master(pdev); + if (nouveau_atomic) + driver_pci.driver_features |= DRIVER_ATOMIC; + ret = drm_get_pci_dev(pdev, pent, &driver_pci); if (ret) { nvkm_device_del(&device); -- cgit v1.2.3 From 69a1d98c831ec64cbfd381f5dcb6697e1445d239 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 14 Jul 2018 20:31:26 +0200 Subject: Revert "staging:r8188eu: Use lib80211 to support TKIP" Commit b83b8b1881c4 ("staging:r8188eu: Use lib80211 to support TKIP") is causing 2 problems for me: 1) One boot the wifi on a laptop with a r8188eu wifi device would not connect and dmesg contained an oops about scheduling while atomic pointing to the tkip code. This went away after reverting the commit. 2) I reverted the revert to try and get the oops from 1. again to be able to add it to this commit message. But now the system did connect to the wifi only to print a whole bunch of oopses, followed by a hardfreeze a few seconds later. Subsequent reboots also all lead to scenario 2. Until I reverted the commit again. Revert the commit fixes both issues making the laptop usable again. Fixes: b83b8b1881c4 ("staging:r8188eu: Use lib80211 to support TKIP") Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede Acked-by: Ivan Safonov Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8188eu/Kconfig | 1 - drivers/staging/rtl8188eu/core/rtw_recv.c | 161 ++++++++++++++++++-------- drivers/staging/rtl8188eu/core/rtw_security.c | 92 +++++++-------- 3 files changed, 160 insertions(+), 94 deletions(-) diff --git a/drivers/staging/rtl8188eu/Kconfig b/drivers/staging/rtl8188eu/Kconfig index 673fdce25530..ff7832798a77 100644 --- a/drivers/staging/rtl8188eu/Kconfig +++ b/drivers/staging/rtl8188eu/Kconfig @@ -7,7 +7,6 @@ config R8188EU select LIB80211 select LIB80211_CRYPT_WEP select LIB80211_CRYPT_CCMP - select LIB80211_CRYPT_TKIP ---help--- This option adds the Realtek RTL8188EU USB device such as TP-Link TL-WN725N. If built as a module, it will be called r8188eu. diff --git a/drivers/staging/rtl8188eu/core/rtw_recv.c b/drivers/staging/rtl8188eu/core/rtw_recv.c index 05936a45eb93..c6857a5be12a 100644 --- a/drivers/staging/rtl8188eu/core/rtw_recv.c +++ b/drivers/staging/rtl8188eu/core/rtw_recv.c @@ -23,7 +23,6 @@ #include #include #include -#include #define ETHERNET_HEADER_SIZE 14 /* Ethernet Header Length */ #define LLC_HEADER_SIZE 6 /* LLC Header Length */ @@ -221,20 +220,31 @@ u32 rtw_free_uc_swdec_pending_queue(struct adapter *adapter) static int recvframe_chkmic(struct adapter *adapter, struct recv_frame *precvframe) { - int res = _SUCCESS; - struct rx_pkt_attrib *prxattrib = &precvframe->attrib; - struct sta_info *stainfo = rtw_get_stainfo(&adapter->stapriv, prxattrib->ta); + int i, res = _SUCCESS; + u32 datalen; + u8 miccode[8]; + u8 bmic_err = false, brpt_micerror = true; + u8 *pframe, *payload, *pframemic; + u8 *mickey; + struct sta_info *stainfo; + struct rx_pkt_attrib *prxattrib = &precvframe->attrib; + struct security_priv *psecuritypriv = &adapter->securitypriv; + + struct mlme_ext_priv *pmlmeext = &adapter->mlmeextpriv; + struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); + + stainfo = rtw_get_stainfo(&adapter->stapriv, &prxattrib->ta[0]); if (prxattrib->encrypt == _TKIP_) { + RT_TRACE(_module_rtl871x_recv_c_, _drv_info_, + ("\n %s: prxattrib->encrypt==_TKIP_\n", __func__)); + RT_TRACE(_module_rtl871x_recv_c_, _drv_info_, + ("\n %s: da=0x%02x:0x%02x:0x%02x:0x%02x:0x%02x:0x%02x\n", + __func__, prxattrib->ra[0], prxattrib->ra[1], prxattrib->ra[2], + prxattrib->ra[3], prxattrib->ra[4], prxattrib->ra[5])); + + /* calculate mic code */ if (stainfo) { - int key_idx; - const int iv_len = 8, icv_len = 4, key_length = 32; - struct sk_buff *skb = precvframe->pkt; - u8 key[32], iv[8], icv[4], *pframe = skb->data; - void *crypto_private = NULL; - struct lib80211_crypto_ops *crypto_ops = try_then_request_module(lib80211_get_crypto_ops("TKIP"), "lib80211_crypt_tkip"); - struct security_priv *psecuritypriv = &adapter->securitypriv; - if (IS_MCAST(prxattrib->ra)) { if (!psecuritypriv) { res = _FAIL; @@ -243,58 +253,115 @@ static int recvframe_chkmic(struct adapter *adapter, DBG_88E("\n %s: didn't install group key!!!!!!!!!!\n", __func__); goto exit; } - key_idx = prxattrib->key_index; - memcpy(key, psecuritypriv->dot118021XGrpKey[key_idx].skey, 16); - memcpy(key + 16, psecuritypriv->dot118021XGrprxmickey[key_idx].skey, 16); + mickey = &psecuritypriv->dot118021XGrprxmickey[prxattrib->key_index].skey[0]; + + RT_TRACE(_module_rtl871x_recv_c_, _drv_info_, + ("\n %s: bcmc key\n", __func__)); } else { - key_idx = 0; - memcpy(key, stainfo->dot118021x_UncstKey.skey, 16); - memcpy(key + 16, stainfo->dot11tkiprxmickey.skey, 16); + mickey = &stainfo->dot11tkiprxmickey.skey[0]; + RT_TRACE(_module_rtl871x_recv_c_, _drv_err_, + ("\n %s: unicast key\n", __func__)); } - if (!crypto_ops) { - res = _FAIL; - goto exit_lib80211_tkip; - } + /* icv_len included the mic code */ + datalen = precvframe->pkt->len-prxattrib->hdrlen - + prxattrib->iv_len-prxattrib->icv_len-8; + pframe = precvframe->pkt->data; + payload = pframe+prxattrib->hdrlen+prxattrib->iv_len; - memcpy(iv, pframe + prxattrib->hdrlen, iv_len); - memcpy(icv, pframe + skb->len - icv_len, icv_len); - memmove(pframe + iv_len, pframe, prxattrib->hdrlen); + RT_TRACE(_module_rtl871x_recv_c_, _drv_info_, ("\n prxattrib->iv_len=%d prxattrib->icv_len=%d\n", prxattrib->iv_len, prxattrib->icv_len)); + rtw_seccalctkipmic(mickey, pframe, payload, datalen, &miccode[0], + (unsigned char)prxattrib->priority); /* care the length of the data */ - skb_pull(skb, iv_len); - skb_trim(skb, skb->len - icv_len); + pframemic = payload+datalen; - crypto_private = crypto_ops->init(key_idx); - if (!crypto_private) { - res = _FAIL; - goto exit_lib80211_tkip; - } - if (crypto_ops->set_key(key, key_length, NULL, crypto_private) < 0) { - res = _FAIL; - goto exit_lib80211_tkip; - } - if (crypto_ops->decrypt_msdu(skb, key_idx, prxattrib->hdrlen, crypto_private)) { - res = _FAIL; - goto exit_lib80211_tkip; + bmic_err = false; + + for (i = 0; i < 8; i++) { + if (miccode[i] != *(pframemic+i)) { + RT_TRACE(_module_rtl871x_recv_c_, _drv_err_, + ("%s: miccode[%d](%02x)!=*(pframemic+%d)(%02x) ", + __func__, i, miccode[i], i, *(pframemic + i))); + bmic_err = true; + } } - memmove(pframe, pframe + iv_len, prxattrib->hdrlen); - skb_push(skb, iv_len); - skb_put(skb, icv_len); + if (bmic_err) { + RT_TRACE(_module_rtl871x_recv_c_, _drv_err_, + ("\n *(pframemic-8)-*(pframemic-1)=0x%02x:0x%02x:0x%02x:0x%02x:0x%02x:0x%02x:0x%02x:0x%02x\n", + *(pframemic-8), *(pframemic-7), *(pframemic-6), + *(pframemic-5), *(pframemic-4), *(pframemic-3), + *(pframemic-2), *(pframemic-1))); + RT_TRACE(_module_rtl871x_recv_c_, _drv_err_, + ("\n *(pframemic-16)-*(pframemic-9)=0x%02x:0x%02x:0x%02x:0x%02x:0x%02x:0x%02x:0x%02x:0x%02x\n", + *(pframemic-16), *(pframemic-15), *(pframemic-14), + *(pframemic-13), *(pframemic-12), *(pframemic-11), + *(pframemic-10), *(pframemic-9))); + { + uint i; - memcpy(pframe + prxattrib->hdrlen, iv, iv_len); - memcpy(pframe + skb->len - icv_len, icv, icv_len); + RT_TRACE(_module_rtl871x_recv_c_, _drv_err_, + ("\n ======demp packet (len=%d)======\n", + precvframe->pkt->len)); + for (i = 0; i < precvframe->pkt->len; i += 8) { + RT_TRACE(_module_rtl871x_recv_c_, + _drv_err_, + ("0x%02x:0x%02x:0x%02x:0x%02x:0x%02x:0x%02x:0x%02x:0x%02x", + *(precvframe->pkt->data+i), + *(precvframe->pkt->data+i+1), + *(precvframe->pkt->data+i+2), + *(precvframe->pkt->data+i+3), + *(precvframe->pkt->data+i+4), + *(precvframe->pkt->data+i+5), + *(precvframe->pkt->data+i+6), + *(precvframe->pkt->data+i+7))); + } + RT_TRACE(_module_rtl871x_recv_c_, + _drv_err_, + ("\n ====== demp packet end [len=%d]======\n", + precvframe->pkt->len)); + RT_TRACE(_module_rtl871x_recv_c_, + _drv_err_, + ("\n hrdlen=%d,\n", + prxattrib->hdrlen)); + } -exit_lib80211_tkip: - if (crypto_ops && crypto_private) - crypto_ops->deinit(crypto_private); + RT_TRACE(_module_rtl871x_recv_c_, _drv_err_, + ("ra=0x%.2x 0x%.2x 0x%.2x 0x%.2x 0x%.2x 0x%.2x psecuritypriv->binstallGrpkey=%d ", + prxattrib->ra[0], prxattrib->ra[1], prxattrib->ra[2], + prxattrib->ra[3], prxattrib->ra[4], prxattrib->ra[5], psecuritypriv->binstallGrpkey)); + + /* double check key_index for some timing issue , */ + /* cannot compare with psecuritypriv->dot118021XGrpKeyid also cause timing issue */ + if ((IS_MCAST(prxattrib->ra) == true) && (prxattrib->key_index != pmlmeinfo->key_index)) + brpt_micerror = false; + + if ((prxattrib->bdecrypted) && (brpt_micerror)) { + rtw_handle_tkip_mic_err(adapter, (u8)IS_MCAST(prxattrib->ra)); + RT_TRACE(_module_rtl871x_recv_c_, _drv_err_, (" mic error :prxattrib->bdecrypted=%d ", prxattrib->bdecrypted)); + DBG_88E(" mic error :prxattrib->bdecrypted=%d\n", prxattrib->bdecrypted); + } else { + RT_TRACE(_module_rtl871x_recv_c_, _drv_err_, (" mic error :prxattrib->bdecrypted=%d ", prxattrib->bdecrypted)); + DBG_88E(" mic error :prxattrib->bdecrypted=%d\n", prxattrib->bdecrypted); + } + res = _FAIL; + } else { + /* mic checked ok */ + if ((!psecuritypriv->bcheck_grpkey) && (IS_MCAST(prxattrib->ra))) { + psecuritypriv->bcheck_grpkey = true; + RT_TRACE(_module_rtl871x_recv_c_, _drv_err_, ("psecuritypriv->bcheck_grpkey = true")); + } + } } else { RT_TRACE(_module_rtl871x_recv_c_, _drv_err_, ("%s: rtw_get_stainfo==NULL!!!\n", __func__)); } + + skb_trim(precvframe->pkt, precvframe->pkt->len - 8); } exit: + return res; } diff --git a/drivers/staging/rtl8188eu/core/rtw_security.c b/drivers/staging/rtl8188eu/core/rtw_security.c index bfe0b217e679..67a2490f055e 100644 --- a/drivers/staging/rtl8188eu/core/rtw_security.c +++ b/drivers/staging/rtl8188eu/core/rtw_security.c @@ -650,71 +650,71 @@ u32 rtw_tkip_encrypt(struct adapter *padapter, u8 *pxmitframe) return res; } +/* The hlen isn't include the IV */ u32 rtw_tkip_decrypt(struct adapter *padapter, u8 *precvframe) -{ - struct rx_pkt_attrib *prxattrib = &((struct recv_frame *)precvframe)->attrib; - u32 res = _SUCCESS; +{ /* exclude ICV */ + u16 pnl; + u32 pnh; + u8 rc4key[16]; + u8 ttkey[16]; + u8 crc[4]; + struct arc4context mycontext; + int length; + + u8 *pframe, *payload, *iv, *prwskey; + union pn48 dot11txpn; + struct sta_info *stainfo; + struct rx_pkt_attrib *prxattrib = &((struct recv_frame *)precvframe)->attrib; + struct security_priv *psecuritypriv = &padapter->securitypriv; + u32 res = _SUCCESS; + + + pframe = (unsigned char *)((struct recv_frame *)precvframe)->pkt->data; /* 4 start to decrypt recvframe */ if (prxattrib->encrypt == _TKIP_) { - struct sta_info *stainfo = rtw_get_stainfo(&padapter->stapriv, prxattrib->ta); - + stainfo = rtw_get_stainfo(&padapter->stapriv, &prxattrib->ta[0]); if (stainfo) { - int key_idx; - const int iv_len = 8, icv_len = 4, key_length = 32; - void *crypto_private = NULL; - struct sk_buff *skb = ((struct recv_frame *)precvframe)->pkt; - u8 key[32], iv[8], icv[4], *pframe = skb->data; - struct lib80211_crypto_ops *crypto_ops = try_then_request_module(lib80211_get_crypto_ops("TKIP"), "lib80211_crypt_tkip"); - struct security_priv *psecuritypriv = &padapter->securitypriv; - if (IS_MCAST(prxattrib->ra)) { if (!psecuritypriv->binstallGrpkey) { res = _FAIL; DBG_88E("%s:rx bc/mc packets, but didn't install group key!!!!!!!!!!\n", __func__); goto exit; } - key_idx = prxattrib->key_index; - memcpy(key, psecuritypriv->dot118021XGrpKey[key_idx].skey, 16); - memcpy(key + 16, psecuritypriv->dot118021XGrprxmickey[key_idx].skey, 16); + prwskey = psecuritypriv->dot118021XGrpKey[prxattrib->key_index].skey; } else { - key_idx = 0; - memcpy(key, stainfo->dot118021x_UncstKey.skey, 16); - memcpy(key + 16, stainfo->dot11tkiprxmickey.skey, 16); + RT_TRACE(_module_rtl871x_security_c_, _drv_err_, ("%s: stainfo!= NULL!!!\n", __func__)); + prwskey = &stainfo->dot118021x_UncstKey.skey[0]; } - if (!crypto_ops) { - res = _FAIL; - goto exit_lib80211_tkip; - } + iv = pframe+prxattrib->hdrlen; + payload = pframe+prxattrib->iv_len+prxattrib->hdrlen; + length = ((struct recv_frame *)precvframe)->pkt->len-prxattrib->hdrlen-prxattrib->iv_len; - memcpy(iv, pframe + prxattrib->hdrlen, iv_len); - memcpy(icv, pframe + skb->len - icv_len, icv_len); + GET_TKIP_PN(iv, dot11txpn); - crypto_private = crypto_ops->init(key_idx); - if (!crypto_private) { - res = _FAIL; - goto exit_lib80211_tkip; - } - if (crypto_ops->set_key(key, key_length, NULL, crypto_private) < 0) { - res = _FAIL; - goto exit_lib80211_tkip; - } - if (crypto_ops->decrypt_mpdu(skb, prxattrib->hdrlen, crypto_private)) { - res = _FAIL; - goto exit_lib80211_tkip; - } + pnl = (u16)(dot11txpn.val); + pnh = (u32)(dot11txpn.val>>16); - memmove(pframe, pframe + iv_len, prxattrib->hdrlen); - skb_push(skb, iv_len); - skb_put(skb, icv_len); + phase1((u16 *)&ttkey[0], prwskey, &prxattrib->ta[0], pnh); + phase2(&rc4key[0], prwskey, (unsigned short *)&ttkey[0], pnl); - memcpy(pframe + prxattrib->hdrlen, iv, iv_len); - memcpy(pframe + skb->len - icv_len, icv, icv_len); + /* 4 decrypt payload include icv */ -exit_lib80211_tkip: - if (crypto_ops && crypto_private) - crypto_ops->deinit(crypto_private); + arcfour_init(&mycontext, rc4key, 16); + arcfour_encrypt(&mycontext, payload, payload, length); + + *((__le32 *)crc) = getcrc32(payload, length-4); + + if (crc[3] != payload[length-1] || + crc[2] != payload[length-2] || + crc[1] != payload[length-3] || + crc[0] != payload[length-4]) { + RT_TRACE(_module_rtl871x_security_c_, _drv_err_, + ("rtw_wep_decrypt:icv error crc (%4ph)!=payload (%4ph)\n", + &crc, &payload[length-4])); + res = _FAIL; + } } else { RT_TRACE(_module_rtl871x_security_c_, _drv_err_, ("rtw_tkip_decrypt: stainfo==NULL!!!\n")); res = _FAIL; -- cgit v1.2.3 From eb37430d402de7d1cb2f37a5fdc80620dd98dc1d Mon Sep 17 00:00:00 2001 From: Sergio Paracuellos Date: Fri, 13 Jul 2018 09:36:59 +0200 Subject: staging: ks7010: call 'hostif_mib_set_request_int' instead of 'hostif_mib_set_request_bool' 'hostif_mib_set_request_bool' function receives a bool as value and send the received value with MIB_VALUE_TYPE_BOOL type. There is one case where the value passed is not a boolean one but 'MCAST_FILTER_PROMISC' which is '2'. Call hostif_mib_set_request_int instead for related multicast enumeration. This changes original code behaviour but seems to be the right way to do this. Fixes: 8ce76bff0e6a ("staging: ks7010: add new helpers to achieve mib set request and simplify code") Reported-by: Dan Carpenter Signed-off-by: Sergio Paracuellos Reviewed-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman --- drivers/staging/ks7010/ks_hostif.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/staging/ks7010/ks_hostif.c b/drivers/staging/ks7010/ks_hostif.c index 0ecffab52ec2..abdaf7cf8162 100644 --- a/drivers/staging/ks7010/ks_hostif.c +++ b/drivers/staging/ks7010/ks_hostif.c @@ -1842,15 +1842,15 @@ void hostif_sme_multicast_set(struct ks_wlan_private *priv) memset(set_address, 0, NIC_MAX_MCAST_LIST * ETH_ALEN); if (dev->flags & IFF_PROMISC) { - hostif_mib_set_request_bool(priv, LOCAL_MULTICAST_FILTER, - MCAST_FILTER_PROMISC); + hostif_mib_set_request_int(priv, LOCAL_MULTICAST_FILTER, + MCAST_FILTER_PROMISC); goto spin_unlock; } if ((netdev_mc_count(dev) > NIC_MAX_MCAST_LIST) || (dev->flags & IFF_ALLMULTI)) { - hostif_mib_set_request_bool(priv, LOCAL_MULTICAST_FILTER, - MCAST_FILTER_MCASTALL); + hostif_mib_set_request_int(priv, LOCAL_MULTICAST_FILTER, + MCAST_FILTER_MCASTALL); goto spin_unlock; } @@ -1866,8 +1866,8 @@ void hostif_sme_multicast_set(struct ks_wlan_private *priv) ETH_ALEN * mc_count); } else { priv->sme_i.sme_flag |= SME_MULTICAST; - hostif_mib_set_request_bool(priv, LOCAL_MULTICAST_FILTER, - MCAST_FILTER_MCAST); + hostif_mib_set_request_int(priv, LOCAL_MULTICAST_FILTER, + MCAST_FILTER_MCAST); } spin_unlock: -- cgit v1.2.3 From b96fba8d5855c3617adbfb43ca4723a808cac954 Mon Sep 17 00:00:00 2001 From: Samuel Thibault Date: Fri, 13 Jul 2018 00:29:36 +0200 Subject: staging: speakup: fix wraparound in uaccess length check If softsynthx_read() is called with `count < 3`, `count - 3` wraps, causing the loop to copy as much data as available to the provided buffer. If softsynthx_read() is invoked through sys_splice(), this causes an unbounded kernel write; but even when userspace just reads from it normally, a small size could cause userspace crashes. Fixes: 425e586cf95b ("speakup: add unicode variant of /dev/softsynth") Cc: stable@vger.kernel.org Signed-off-by: Samuel Thibault Signed-off-by: Jann Horn Signed-off-by: Greg Kroah-Hartman --- drivers/staging/speakup/speakup_soft.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/staging/speakup/speakup_soft.c b/drivers/staging/speakup/speakup_soft.c index a61bc41b82d7..947c79532e10 100644 --- a/drivers/staging/speakup/speakup_soft.c +++ b/drivers/staging/speakup/speakup_soft.c @@ -198,11 +198,15 @@ static ssize_t softsynthx_read(struct file *fp, char __user *buf, size_t count, int chars_sent = 0; char __user *cp; char *init; + size_t bytes_per_ch = unicode ? 3 : 1; u16 ch; int empty; unsigned long flags; DEFINE_WAIT(wait); + if (count < bytes_per_ch) + return -EINVAL; + spin_lock_irqsave(&speakup_info.spinlock, flags); while (1) { prepare_to_wait(&speakup_event, &wait, TASK_INTERRUPTIBLE); @@ -228,7 +232,7 @@ static ssize_t softsynthx_read(struct file *fp, char __user *buf, size_t count, init = get_initstring(); /* Keep 3 bytes available for a 16bit UTF-8-encoded character */ - while (chars_sent <= count - 3) { + while (chars_sent <= count - bytes_per_ch) { if (speakup_info.flushing) { speakup_info.flushing = 0; ch = '\x18'; -- cgit v1.2.3 From 3b1074bf9817bf43d4da375aa5f4b6c88f1d953e Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Thu, 12 Jul 2018 12:59:37 -0700 Subject: mmc: mxcmmc: Fix missing parentheses and brace MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Looks like the adjusted syntax wasn't fully build tested. This fixes failures with powerpc builds: drivers/mmc/host/mxcmmc.c: In function ‘mxcmci_swap_buffers’: drivers/mmc/host/mxcmmc.c:296:51: error: expected ‘)’ before ‘;’ token void *buf = kmap_atomic(sg_page(sg) + sg->offset; ^ drivers/mmc/host/mxcmmc.c:299:1: error: expected ‘,’ or ‘;’ before ‘}’ token } ^ Fixes: b189e7589f6d3 ("mmc: mxcmmc: handle highmem pages") Signed-off-by: Kees Cook Acked-by: Randy Dunlap Tested-by: Randy Dunlap Signed-off-by: Ulf Hansson --- drivers/mmc/host/mxcmmc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c index 75f781c11e89..de4e6e5bf304 100644 --- a/drivers/mmc/host/mxcmmc.c +++ b/drivers/mmc/host/mxcmmc.c @@ -293,9 +293,10 @@ static void mxcmci_swap_buffers(struct mmc_data *data) int i; for_each_sg(data->sg, sg, data->sg_len, i) { - void *buf = kmap_atomic(sg_page(sg) + sg->offset; + void *buf = kmap_atomic(sg_page(sg) + sg->offset); buffer_swap32(buf, sg->length); kunmap_atomic(buf); + } } #else static inline void mxcmci_swap_buffers(struct mmc_data *data) {} -- cgit v1.2.3 From 6f88a6439da5d94de334a341503bc2c7f4a7ea7f Mon Sep 17 00:00:00 2001 From: KT Liao Date: Mon, 16 Jul 2018 12:10:03 +0000 Subject: Input: elan_i2c - add another ACPI ID for Lenovo Ideapad 330-15AST Add ELAN0622 to ACPI mapping table to support Elan touchpad found in Ideapad 330-15AST. Signed-off-by: KT Liao Reported-by: Anant Shende Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/elan_i2c_core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c index e26d8c7d131d..f5ae24865355 100644 --- a/drivers/input/mouse/elan_i2c_core.c +++ b/drivers/input/mouse/elan_i2c_core.c @@ -1347,6 +1347,7 @@ static const struct acpi_device_id elan_acpi_id[] = { { "ELAN0612", 0 }, { "ELAN0618", 0 }, { "ELAN061D", 0 }, + { "ELAN0622", 0 }, { "ELAN1000", 0 }, { } }; -- cgit v1.2.3 From d530b5f1ca0bb66958a2b714bebe40a1248b9c15 Mon Sep 17 00:00:00 2001 From: Nicholas Mc Guire Date: Sat, 14 Jul 2018 14:32:12 +0200 Subject: drm: re-enable error handling drm_legacy_ctxbitmap_next() returns idr_alloc() which can return -ENOMEM, -EINVAL or -ENOSPC none of which are -1 . but the call sites of drm_legacy_ctxbitmap_next() seem to be assuming that the error case would be -1 (original return of drm_ctxbitmap_next() prior to 2.6.23 was actually -1). Thus reenable error handling by checking for < 0. Signed-off-by: Nicholas Mc Guire Fixes: 62968144e673 ("drm: convert drm context code to use Linux idr") Signed-off-by: Sean Paul Link: https://patchwork.freedesktop.org/patch/msgid/1531571532-22733-1-git-send-email-hofrat@osadl.org --- drivers/gpu/drm/drm_context.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_context.c b/drivers/gpu/drm/drm_context.c index 3c4000facb36..f973d287696a 100644 --- a/drivers/gpu/drm/drm_context.c +++ b/drivers/gpu/drm/drm_context.c @@ -372,7 +372,7 @@ int drm_legacy_addctx(struct drm_device *dev, void *data, ctx->handle = drm_legacy_ctxbitmap_next(dev); } DRM_DEBUG("%d\n", ctx->handle); - if (ctx->handle == -1) { + if (ctx->handle < 0) { DRM_DEBUG("Not enough free contexts.\n"); /* Should this return -EBUSY instead? */ return -ENOMEM; -- cgit v1.2.3 From d30e23d69981a4b665f5ce8711335df986576389 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 14 Jul 2018 16:01:06 +0100 Subject: ASoC: hdmi-codec: fix routing Commit 943fa0228252 ("ASoC: hdmi-codec: Use different name for playback streams") broke hdmi-codec's routing between it's output "TX" widget and the S/PDIF or I2S streams by renaming the streams. Whether an error occurs or not is dependent on whether there is another widget called "Playback" registered by some other component - if there is, that widget will be (incorrectly) bound to the HDMI codec's "TX" output widget. If we end up connecting "TX" incorrectly, it can result in components not being started, causing no audio output. Since the I2S and S/PDIF streams now have different names, we can't use a static route at component level to describe the relationship, so arrange to dynamically create the route when the DAI driver is probed. Fixes: 943fa0228252 ("ASoC: hdmi-codec: Use different name for playback streams") Signed-off-by: Russell King Signed-off-by: Mark Brown --- sound/soc/codecs/hdmi-codec.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) diff --git a/sound/soc/codecs/hdmi-codec.c b/sound/soc/codecs/hdmi-codec.c index 6fa11888672d..3e5b12de71bb 100644 --- a/sound/soc/codecs/hdmi-codec.c +++ b/sound/soc/codecs/hdmi-codec.c @@ -291,10 +291,6 @@ static const struct snd_soc_dapm_widget hdmi_widgets[] = { SND_SOC_DAPM_OUTPUT("TX"), }; -static const struct snd_soc_dapm_route hdmi_routes[] = { - { "TX", NULL, "Playback" }, -}; - enum { DAI_ID_I2S = 0, DAI_ID_SPDIF, @@ -689,9 +685,23 @@ static int hdmi_codec_pcm_new(struct snd_soc_pcm_runtime *rtd, return snd_ctl_add(rtd->card->snd_card, kctl); } +static int hdmi_dai_probe(struct snd_soc_dai *dai) +{ + struct snd_soc_dapm_context *dapm; + struct snd_soc_dapm_route route = { + .sink = "TX", + .source = dai->driver->playback.stream_name, + }; + + dapm = snd_soc_component_get_dapm(dai->component); + + return snd_soc_dapm_add_routes(dapm, &route, 1); +} + static const struct snd_soc_dai_driver hdmi_i2s_dai = { .name = "i2s-hifi", .id = DAI_ID_I2S, + .probe = hdmi_dai_probe, .playback = { .stream_name = "I2S Playback", .channels_min = 2, @@ -707,6 +717,7 @@ static const struct snd_soc_dai_driver hdmi_i2s_dai = { static const struct snd_soc_dai_driver hdmi_spdif_dai = { .name = "spdif-hifi", .id = DAI_ID_SPDIF, + .probe = hdmi_dai_probe, .playback = { .stream_name = "SPDIF Playback", .channels_min = 2, @@ -733,8 +744,6 @@ static int hdmi_of_xlate_dai_id(struct snd_soc_component *component, static const struct snd_soc_component_driver hdmi_driver = { .dapm_widgets = hdmi_widgets, .num_dapm_widgets = ARRAY_SIZE(hdmi_widgets), - .dapm_routes = hdmi_routes, - .num_dapm_routes = ARRAY_SIZE(hdmi_routes), .of_xlate_dai_id = hdmi_of_xlate_dai_id, .idle_bias_on = 1, .use_pmdown_time = 1, -- cgit v1.2.3 From 8452112baac67c3235d15de67fb190d29bbba98f Mon Sep 17 00:00:00 2001 From: Naveen Manohar Date: Wed, 11 Jul 2018 16:05:36 +0530 Subject: ASoC: Intel: Boards: Add GLK Realtek Maxim I2S machine driver Patch adds Geminilake I2S machine driver which uses following codecs: RT5682 and MAX98357A. Signed-off-by: Naveen Manohar Signed-off-by: Harsha Priya Acked-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- sound/soc/intel/boards/Kconfig | 14 + sound/soc/intel/boards/Makefile | 2 + sound/soc/intel/boards/glk_rt5682_max98357a.c | 643 ++++++++++++++++++++++++++ 3 files changed, 659 insertions(+) create mode 100644 sound/soc/intel/boards/glk_rt5682_max98357a.c diff --git a/sound/soc/intel/boards/Kconfig b/sound/soc/intel/boards/Kconfig index 24797482a3d2..cccda87f4b34 100644 --- a/sound/soc/intel/boards/Kconfig +++ b/sound/soc/intel/boards/Kconfig @@ -281,6 +281,20 @@ config SND_SOC_INTEL_KBL_DA7219_MAX98357A_MACH Say Y if you have such a device. If unsure select "N". +config SND_SOC_INTEL_GLK_RT5682_MAX98357A_MACH + tristate "GLK with RT5682 and MAX98357A in I2S Mode" + depends on MFD_INTEL_LPSS && I2C && ACPI + select SND_SOC_RT5682 + select SND_SOC_MAX98357A + select SND_SOC_DMIC + select SND_SOC_HDAC_HDMI + select SND_HDA_DSP_LOADER + help + This adds support for ASoC machine driver for Geminilake platforms + with RT5682 + MAX98357A I2S audio codec. + Say Y if you have such a device. + If unsure select "N". + endif ## SND_SOC_INTEL_SKYLAKE endif ## SND_SOC_INTEL_MACH diff --git a/sound/soc/intel/boards/Makefile b/sound/soc/intel/boards/Makefile index 92b5507291af..87ef8b4058e5 100644 --- a/sound/soc/intel/boards/Makefile +++ b/sound/soc/intel/boards/Makefile @@ -6,6 +6,7 @@ snd-soc-sst-bdw-rt5677-mach-objs := bdw-rt5677.o snd-soc-sst-broadwell-objs := broadwell.o snd-soc-sst-bxt-da7219_max98357a-objs := bxt_da7219_max98357a.o snd-soc-sst-bxt-rt298-objs := bxt_rt298.o +snd-soc-sst-glk-rt5682_max98357a-objs := glk_rt5682_max98357a.o snd-soc-sst-bytcr-rt5640-objs := bytcr_rt5640.o snd-soc-sst-bytcr-rt5651-objs := bytcr_rt5651.o snd-soc-sst-cht-bsw-rt5672-objs := cht_bsw_rt5672.o @@ -27,6 +28,7 @@ obj-$(CONFIG_SND_SOC_INTEL_BYT_RT5640_MACH) += snd-soc-sst-byt-rt5640-mach.o obj-$(CONFIG_SND_SOC_INTEL_BYT_MAX98090_MACH) += snd-soc-sst-byt-max98090-mach.o obj-$(CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH) += snd-soc-sst-bxt-da7219_max98357a.o obj-$(CONFIG_SND_SOC_INTEL_BXT_RT298_MACH) += snd-soc-sst-bxt-rt298.o +obj-$(CONFIG_SND_SOC_INTEL_GLK_RT5682_MAX98357A_MACH) += snd-soc-sst-glk-rt5682_max98357a.o obj-$(CONFIG_SND_SOC_INTEL_BROADWELL_MACH) += snd-soc-sst-broadwell.o obj-$(CONFIG_SND_SOC_INTEL_BDW_RT5677_MACH) += snd-soc-sst-bdw-rt5677-mach.o obj-$(CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH) += snd-soc-sst-bytcr-rt5640.o diff --git a/sound/soc/intel/boards/glk_rt5682_max98357a.c b/sound/soc/intel/boards/glk_rt5682_max98357a.c new file mode 100644 index 000000000000..c4b94e2617c5 --- /dev/null +++ b/sound/soc/intel/boards/glk_rt5682_max98357a.c @@ -0,0 +1,643 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright(c) 2018 Intel Corporation. + +/* + * Intel Geminilake I2S Machine Driver with MAX98357A & RT5682 Codecs + * + * Modified from: + * Intel Apollolake I2S Machine driver + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "../skylake/skl.h" +#include "../../codecs/rt5682.h" +#include "../../codecs/hdac_hdmi.h" + +/* The platform clock outputs 19.2Mhz clock to codec as I2S MCLK */ +#define GLK_PLAT_CLK_FREQ 19200000 +#define RT5682_PLL_FREQ (48000 * 512) +#define GLK_REALTEK_CODEC_DAI "rt5682-aif1" +#define GLK_MAXIM_CODEC_DAI "HiFi" +#define MAXIM_DEV0_NAME "MX98357A:00" +#define DUAL_CHANNEL 2 +#define QUAD_CHANNEL 4 +#define NAME_SIZE 32 + +static struct snd_soc_jack geminilake_hdmi[3]; + +struct glk_hdmi_pcm { + struct list_head head; + struct snd_soc_dai *codec_dai; + int device; +}; + +struct glk_card_private { + struct snd_soc_jack geminilake_headset; + struct list_head hdmi_pcm_list; +}; + +enum { + GLK_DPCM_AUDIO_PB = 0, + GLK_DPCM_AUDIO_CP, + GLK_DPCM_AUDIO_HS_PB, + GLK_DPCM_AUDIO_ECHO_REF_CP, + GLK_DPCM_AUDIO_REF_CP, + GLK_DPCM_AUDIO_DMIC_CP, + GLK_DPCM_AUDIO_HDMI1_PB, + GLK_DPCM_AUDIO_HDMI2_PB, + GLK_DPCM_AUDIO_HDMI3_PB, +}; + +static int platform_clock_control(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *k, int event) +{ + struct snd_soc_dapm_context *dapm = w->dapm; + struct snd_soc_card *card = dapm->card; + struct snd_soc_dai *codec_dai; + int ret = 0; + + codec_dai = snd_soc_card_get_codec_dai(card, GLK_REALTEK_CODEC_DAI); + if (!codec_dai) { + dev_err(card->dev, "Codec dai not found; Unable to set/unset codec pll\n"); + return -EIO; + } + + if (SND_SOC_DAPM_EVENT_OFF(event)) { + ret = snd_soc_dai_set_sysclk(codec_dai, 0, 0, 0); + if (ret) + dev_err(card->dev, "failed to stop sysclk: %d\n", ret); + } else if (SND_SOC_DAPM_EVENT_ON(event)) { + ret = snd_soc_dai_set_pll(codec_dai, 0, RT5682_PLL1_S_MCLK, + GLK_PLAT_CLK_FREQ, RT5682_PLL_FREQ); + if (ret < 0) { + dev_err(card->dev, "can't set codec pll: %d\n", ret); + return ret; + } + } + + if (ret) + dev_err(card->dev, "failed to start internal clk: %d\n", ret); + + return ret; +} + +static const struct snd_kcontrol_new geminilake_controls[] = { + SOC_DAPM_PIN_SWITCH("Headphone Jack"), + SOC_DAPM_PIN_SWITCH("Headset Mic"), + SOC_DAPM_PIN_SWITCH("Spk"), +}; + +static const struct snd_soc_dapm_widget geminilake_widgets[] = { + SND_SOC_DAPM_HP("Headphone Jack", NULL), + SND_SOC_DAPM_MIC("Headset Mic", NULL), + SND_SOC_DAPM_SPK("Spk", NULL), + SND_SOC_DAPM_MIC("SoC DMIC", NULL), + SND_SOC_DAPM_SPK("HDMI1", NULL), + SND_SOC_DAPM_SPK("HDMI2", NULL), + SND_SOC_DAPM_SPK("HDMI3", NULL), + SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0, + platform_clock_control, SND_SOC_DAPM_PRE_PMU | + SND_SOC_DAPM_POST_PMD), +}; + +static const struct snd_soc_dapm_route geminilake_map[] = { + /* HP jack connectors - unknown if we have jack detection */ + { "Headphone Jack", NULL, "Platform Clock" }, + { "Headphone Jack", NULL, "HPOL" }, + { "Headphone Jack", NULL, "HPOR" }, + + /* speaker */ + { "Spk", NULL, "Speaker" }, + + /* other jacks */ + { "Headset Mic", NULL, "Platform Clock" }, + { "IN1P", NULL, "Headset Mic" }, + + /* digital mics */ + { "DMic", NULL, "SoC DMIC" }, + + /* CODEC BE connections */ + { "HiFi Playback", NULL, "ssp1 Tx" }, + { "ssp1 Tx", NULL, "codec0_out" }, + + { "AIF1 Playback", NULL, "ssp2 Tx" }, + { "ssp2 Tx", NULL, "codec1_out" }, + + { "codec0_in", NULL, "ssp2 Rx" }, + { "ssp2 Rx", NULL, "AIF1 Capture" }, + + { "HDMI1", NULL, "hif5-0 Output" }, + { "HDMI2", NULL, "hif6-0 Output" }, + { "HDMI2", NULL, "hif7-0 Output" }, + + { "hifi3", NULL, "iDisp3 Tx" }, + { "iDisp3 Tx", NULL, "iDisp3_out" }, + { "hifi2", NULL, "iDisp2 Tx" }, + { "iDisp2 Tx", NULL, "iDisp2_out" }, + { "hifi1", NULL, "iDisp1 Tx" }, + { "iDisp1 Tx", NULL, "iDisp1_out" }, + + /* DMIC */ + { "dmic01_hifi", NULL, "DMIC01 Rx" }, + { "DMIC01 Rx", NULL, "DMIC AIF" }, +}; + +static int geminilake_ssp_fixup(struct snd_soc_pcm_runtime *rtd, + struct snd_pcm_hw_params *params) +{ + struct snd_interval *rate = hw_param_interval(params, + SNDRV_PCM_HW_PARAM_RATE); + struct snd_interval *channels = hw_param_interval(params, + SNDRV_PCM_HW_PARAM_CHANNELS); + struct snd_mask *fmt = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT); + + /* The ADSP will convert the FE rate to 48k, stereo */ + rate->min = rate->max = 48000; + channels->min = channels->max = DUAL_CHANNEL; + + /* set SSP to 24 bit */ + snd_mask_none(fmt); + snd_mask_set(fmt, SNDRV_PCM_FORMAT_S24_LE); + + return 0; +} + +static int geminilake_rt5682_codec_init(struct snd_soc_pcm_runtime *rtd) +{ + struct glk_card_private *ctx = snd_soc_card_get_drvdata(rtd->card); + struct snd_soc_component *component = rtd->codec_dai->component; + struct snd_soc_dai *codec_dai = rtd->codec_dai; + struct snd_soc_jack *jack; + int ret; + + /* Configure sysclk for codec */ + ret = snd_soc_dai_set_sysclk(codec_dai, RT5682_SCLK_S_PLL1, + RT5682_PLL_FREQ, SND_SOC_CLOCK_IN); + if (ret < 0) + dev_err(rtd->dev, "snd_soc_dai_set_sysclk err = %d\n", ret); + + /* + * Headset buttons map to the google Reference headset. + * These can be configured by userspace. + */ + ret = snd_soc_card_jack_new(rtd->card, "Headset Jack", + SND_JACK_HEADSET | SND_JACK_BTN_0 | SND_JACK_BTN_1 | + SND_JACK_BTN_2 | SND_JACK_BTN_3 | SND_JACK_LINEOUT, + &ctx->geminilake_headset, NULL, 0); + if (ret) { + dev_err(rtd->dev, "Headset Jack creation failed: %d\n", ret); + return ret; + } + + jack = &ctx->geminilake_headset; + + snd_jack_set_key(jack->jack, SND_JACK_BTN_0, KEY_PLAYPAUSE); + snd_jack_set_key(jack->jack, SND_JACK_BTN_1, KEY_VOLUMEUP); + snd_jack_set_key(jack->jack, SND_JACK_BTN_2, KEY_VOLUMEDOWN); + snd_jack_set_key(jack->jack, SND_JACK_BTN_3, KEY_VOICECOMMAND); + ret = snd_soc_component_set_jack(component, jack, NULL); + + if (ret) { + dev_err(rtd->dev, "Headset Jack call-back failed: %d\n", ret); + return ret; + } + + return ret; +}; + +static int geminilake_rt5682_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->codec_dai; + int ret; + + /* Set valid bitmask & configuration for I2S in 24 bit */ + ret = snd_soc_dai_set_tdm_slot(codec_dai, 0x0, 0x0, 2, 24); + if (ret < 0) { + dev_err(rtd->dev, "set TDM slot err:%d\n", ret); + return ret; + } + + return ret; +} + +static struct snd_soc_ops geminilake_rt5682_ops = { + .hw_params = geminilake_rt5682_hw_params, +}; + +static int geminilake_hdmi_init(struct snd_soc_pcm_runtime *rtd) +{ + struct glk_card_private *ctx = snd_soc_card_get_drvdata(rtd->card); + struct snd_soc_dai *dai = rtd->codec_dai; + struct glk_hdmi_pcm *pcm; + + pcm = devm_kzalloc(rtd->card->dev, sizeof(*pcm), GFP_KERNEL); + if (!pcm) + return -ENOMEM; + + pcm->device = GLK_DPCM_AUDIO_HDMI1_PB + dai->id; + pcm->codec_dai = dai; + + list_add_tail(&pcm->head, &ctx->hdmi_pcm_list); + + return 0; +} + +static int geminilake_rt5682_fe_init(struct snd_soc_pcm_runtime *rtd) +{ + struct snd_soc_component *component = rtd->cpu_dai->component; + struct snd_soc_dapm_context *dapm; + int ret; + + dapm = snd_soc_component_get_dapm(component); + ret = snd_soc_dapm_ignore_suspend(dapm, "Reference Capture"); + if (ret) { + dev_err(rtd->dev, "Ref Cap ignore suspend failed %d\n", ret); + return ret; + } + + return ret; +} + +static const unsigned int rates[] = { + 48000, +}; + +static const struct snd_pcm_hw_constraint_list constraints_rates = { + .count = ARRAY_SIZE(rates), + .list = rates, + .mask = 0, +}; + +static const unsigned int channels[] = { + DUAL_CHANNEL, +}; + +static const struct snd_pcm_hw_constraint_list constraints_channels = { + .count = ARRAY_SIZE(channels), + .list = channels, + .mask = 0, +}; + +static unsigned int channels_quad[] = { + QUAD_CHANNEL, +}; + +static struct snd_pcm_hw_constraint_list constraints_channels_quad = { + .count = ARRAY_SIZE(channels_quad), + .list = channels_quad, + .mask = 0, +}; + +static int geminilake_dmic_fixup(struct snd_soc_pcm_runtime *rtd, + struct snd_pcm_hw_params *params) +{ + struct snd_interval *channels = hw_param_interval(params, + SNDRV_PCM_HW_PARAM_CHANNELS); + + /* + * set BE channel constraint as user FE channels + */ + channels->min = channels->max = 4; + + return 0; +} + +static int geminilake_dmic_startup(struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + + runtime->hw.channels_min = runtime->hw.channels_max = QUAD_CHANNEL; + snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_CHANNELS, + &constraints_channels_quad); + + return snd_pcm_hw_constraint_list(substream->runtime, 0, + SNDRV_PCM_HW_PARAM_RATE, &constraints_rates); +} + +static const struct snd_soc_ops geminilake_dmic_ops = { + .startup = geminilake_dmic_startup, +}; + +static const unsigned int rates_16000[] = { + 16000, +}; + +static const struct snd_pcm_hw_constraint_list constraints_16000 = { + .count = ARRAY_SIZE(rates_16000), + .list = rates_16000, +}; + +static int geminilake_refcap_startup(struct snd_pcm_substream *substream) +{ + return snd_pcm_hw_constraint_list(substream->runtime, 0, + SNDRV_PCM_HW_PARAM_RATE, + &constraints_16000); +}; + +static const struct snd_soc_ops geminilake_refcap_ops = { + .startup = geminilake_refcap_startup, +}; + +/* geminilake digital audio interface glue - connects codec <--> CPU */ +static struct snd_soc_dai_link geminilake_dais[] = { + /* Front End DAI links */ + [GLK_DPCM_AUDIO_PB] = { + .name = "Glk Audio Port", + .stream_name = "Audio", + .cpu_dai_name = "System Pin", + .platform_name = "0000:00:0e.0", + .dynamic = 1, + .codec_name = "snd-soc-dummy", + .codec_dai_name = "snd-soc-dummy-dai", + .nonatomic = 1, + .init = geminilake_rt5682_fe_init, + .trigger = { + SND_SOC_DPCM_TRIGGER_POST, SND_SOC_DPCM_TRIGGER_POST}, + .dpcm_playback = 1, + }, + [GLK_DPCM_AUDIO_CP] = { + .name = "Glk Audio Capture Port", + .stream_name = "Audio Record", + .cpu_dai_name = "System Pin", + .platform_name = "0000:00:0e.0", + .dynamic = 1, + .codec_name = "snd-soc-dummy", + .codec_dai_name = "snd-soc-dummy-dai", + .nonatomic = 1, + .trigger = { + SND_SOC_DPCM_TRIGGER_POST, SND_SOC_DPCM_TRIGGER_POST}, + .dpcm_capture = 1, + }, + [GLK_DPCM_AUDIO_HS_PB] = { + .name = "Glk Audio Headset Playback", + .stream_name = "Headset Audio", + .cpu_dai_name = "System Pin2", + .platform_name = "0000:00:0e.0", + .codec_name = "snd-soc-dummy", + .codec_dai_name = "snd-soc-dummy-dai", + .dpcm_playback = 1, + .nonatomic = 1, + .dynamic = 1, + }, + [GLK_DPCM_AUDIO_ECHO_REF_CP] = { + .name = "Glk Audio Echo Reference cap", + .stream_name = "Echoreference Capture", + .cpu_dai_name = "Echoref Pin", + .platform_name = "0000:00:0e.0", + .codec_name = "snd-soc-dummy", + .codec_dai_name = "snd-soc-dummy-dai", + .init = NULL, + .capture_only = 1, + .nonatomic = 1, + }, + [GLK_DPCM_AUDIO_REF_CP] = { + .name = "Glk Audio Reference cap", + .stream_name = "Refcap", + .cpu_dai_name = "Reference Pin", + .codec_name = "snd-soc-dummy", + .codec_dai_name = "snd-soc-dummy-dai", + .platform_name = "0000:00:0e.0", + .init = NULL, + .dpcm_capture = 1, + .nonatomic = 1, + .dynamic = 1, + .ops = &geminilake_refcap_ops, + }, + [GLK_DPCM_AUDIO_DMIC_CP] = { + .name = "Glk Audio DMIC cap", + .stream_name = "dmiccap", + .cpu_dai_name = "DMIC Pin", + .codec_name = "snd-soc-dummy", + .codec_dai_name = "snd-soc-dummy-dai", + .platform_name = "0000:00:0e.0", + .init = NULL, + .dpcm_capture = 1, + .nonatomic = 1, + .dynamic = 1, + .ops = &geminilake_dmic_ops, + }, + [GLK_DPCM_AUDIO_HDMI1_PB] = { + .name = "Glk HDMI Port1", + .stream_name = "Hdmi1", + .cpu_dai_name = "HDMI1 Pin", + .codec_name = "snd-soc-dummy", + .codec_dai_name = "snd-soc-dummy-dai", + .platform_name = "0000:00:0e.0", + .dpcm_playback = 1, + .init = NULL, + .trigger = { + SND_SOC_DPCM_TRIGGER_POST, SND_SOC_DPCM_TRIGGER_POST}, + .nonatomic = 1, + .dynamic = 1, + }, + [GLK_DPCM_AUDIO_HDMI2_PB] = { + .name = "Glk HDMI Port2", + .stream_name = "Hdmi2", + .cpu_dai_name = "HDMI2 Pin", + .codec_name = "snd-soc-dummy", + .codec_dai_name = "snd-soc-dummy-dai", + .platform_name = "0000:00:0e.0", + .dpcm_playback = 1, + .init = NULL, + .trigger = { + SND_SOC_DPCM_TRIGGER_POST, SND_SOC_DPCM_TRIGGER_POST}, + .nonatomic = 1, + .dynamic = 1, + }, + [GLK_DPCM_AUDIO_HDMI3_PB] = { + .name = "Glk HDMI Port3", + .stream_name = "Hdmi3", + .cpu_dai_name = "HDMI3 Pin", + .codec_name = "snd-soc-dummy", + .codec_dai_name = "snd-soc-dummy-dai", + .platform_name = "0000:00:0e.0", + .trigger = { + SND_SOC_DPCM_TRIGGER_POST, SND_SOC_DPCM_TRIGGER_POST}, + .dpcm_playback = 1, + .init = NULL, + .nonatomic = 1, + .dynamic = 1, + }, + /* Back End DAI links */ + { + /* SSP1 - Codec */ + .name = "SSP1-Codec", + .id = 0, + .cpu_dai_name = "SSP1 Pin", + .platform_name = "0000:00:0e.0", + .no_pcm = 1, + .codec_name = MAXIM_DEV0_NAME, + .codec_dai_name = GLK_MAXIM_CODEC_DAI, + .dai_fmt = SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBS_CFS, + .ignore_pmdown_time = 1, + .be_hw_params_fixup = geminilake_ssp_fixup, + .dpcm_playback = 1, + }, + { + /* SSP2 - Codec */ + .name = "SSP2-Codec", + .id = 1, + .cpu_dai_name = "SSP2 Pin", + .platform_name = "0000:00:0e.0", + .no_pcm = 1, + .codec_name = "i2c-10EC5682:00", + .codec_dai_name = GLK_REALTEK_CODEC_DAI, + .init = geminilake_rt5682_codec_init, + .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBS_CFS, + .ignore_pmdown_time = 1, + .be_hw_params_fixup = geminilake_ssp_fixup, + .ops = &geminilake_rt5682_ops, + .dpcm_playback = 1, + .dpcm_capture = 1, + }, + { + .name = "dmic01", + .id = 2, + .cpu_dai_name = "DMIC01 Pin", + .codec_name = "dmic-codec", + .codec_dai_name = "dmic-hifi", + .platform_name = "0000:00:0e.0", + .ignore_suspend = 1, + .be_hw_params_fixup = geminilake_dmic_fixup, + .dpcm_capture = 1, + .no_pcm = 1, + }, + { + .name = "iDisp1", + .id = 3, + .cpu_dai_name = "iDisp1 Pin", + .codec_name = "ehdaudio0D2", + .codec_dai_name = "intel-hdmi-hifi1", + .platform_name = "0000:00:0e.0", + .init = geminilake_hdmi_init, + .dpcm_playback = 1, + .no_pcm = 1, + }, + { + .name = "iDisp2", + .id = 4, + .cpu_dai_name = "iDisp2 Pin", + .codec_name = "ehdaudio0D2", + .codec_dai_name = "intel-hdmi-hifi2", + .platform_name = "0000:00:0e.0", + .init = geminilake_hdmi_init, + .dpcm_playback = 1, + .no_pcm = 1, + }, + { + .name = "iDisp3", + .id = 5, + .cpu_dai_name = "iDisp3 Pin", + .codec_name = "ehdaudio0D2", + .codec_dai_name = "intel-hdmi-hifi3", + .platform_name = "0000:00:0e.0", + .init = geminilake_hdmi_init, + .dpcm_playback = 1, + .no_pcm = 1, + }, +}; + +static int glk_card_late_probe(struct snd_soc_card *card) +{ + struct glk_card_private *ctx = snd_soc_card_get_drvdata(card); + struct snd_soc_component *component = NULL; + char jack_name[NAME_SIZE]; + struct glk_hdmi_pcm *pcm; + int err = 0; + int i = 0; + + list_for_each_entry(pcm, &ctx->hdmi_pcm_list, head) { + component = pcm->codec_dai->component; + snprintf(jack_name, sizeof(jack_name), + "HDMI/DP, pcm=%d Jack", pcm->device); + err = snd_soc_card_jack_new(card, jack_name, + SND_JACK_AVOUT, &geminilake_hdmi[i], + NULL, 0); + + if (err) + return err; + + err = hdac_hdmi_jack_init(pcm->codec_dai, pcm->device, + &geminilake_hdmi[i]); + if (err < 0) + return err; + + i++; + } + + if (!component) + return -EINVAL; + + return hdac_hdmi_jack_port_init(component, &card->dapm); +} + +/* geminilake audio machine driver for SPT + RT5682 */ +static struct snd_soc_card glk_audio_card_rt5682_m98357a = { + .name = "glkrt5682max", + .owner = THIS_MODULE, + .dai_link = geminilake_dais, + .num_links = ARRAY_SIZE(geminilake_dais), + .controls = geminilake_controls, + .num_controls = ARRAY_SIZE(geminilake_controls), + .dapm_widgets = geminilake_widgets, + .num_dapm_widgets = ARRAY_SIZE(geminilake_widgets), + .dapm_routes = geminilake_map, + .num_dapm_routes = ARRAY_SIZE(geminilake_map), + .fully_routed = true, + .late_probe = glk_card_late_probe, +}; + +static int geminilake_audio_probe(struct platform_device *pdev) +{ + struct glk_card_private *ctx; + + ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_ATOMIC); + if (!ctx) + return -ENOMEM; + + INIT_LIST_HEAD(&ctx->hdmi_pcm_list); + + glk_audio_card_rt5682_m98357a.dev = &pdev->dev; + snd_soc_card_set_drvdata(&glk_audio_card_rt5682_m98357a, ctx); + + return devm_snd_soc_register_card(&pdev->dev, + &glk_audio_card_rt5682_m98357a); +} + +static const struct platform_device_id glk_board_ids[] = { + { + .name = "glk_rt5682_max98357a", + .driver_data = + (kernel_ulong_t)&glk_audio_card_rt5682_m98357a, + }, + { } +}; + +static struct platform_driver geminilake_audio = { + .probe = geminilake_audio_probe, + .driver = { + .name = "glk_rt5682_max98357a", + .pm = &snd_soc_pm_ops, + }, + .id_table = glk_board_ids, +}; +module_platform_driver(geminilake_audio) + +/* Module information */ +MODULE_DESCRIPTION("Geminilake Audio Machine driver-RT5682 & MAX98357A in I2S mode"); +MODULE_AUTHOR("Naveen Manohar "); +MODULE_AUTHOR("Harsha Priya "); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:glk_rt5682_max98357a"); -- cgit v1.2.3 From fa9d2f17c23fb3ea6b659b1bfe4ca10551a19e56 Mon Sep 17 00:00:00 2001 From: "Agrawal, Akshu" Date: Mon, 16 Jul 2018 15:02:40 +0800 Subject: ASoC: AMD: Send correct channel for configuring DMA descriptors Earlier, ch1 was used to define ACP-SYSMEM transfer and ch2 for ACP-I2S transfer. With recent patches ch1 is used to define channel order number 1 and ch2 as channel order number 2. Thus, Playback: ch1:SYSMEM->ACP ch2:ACP->I2S Capture: ch1:I2S->ACP ch1:ACP->SYSMEM Signed-off-by: Akshu Agrawal Signed-off-by: Mark Brown --- sound/soc/amd/acp-pcm-dma.c | 26 ++++++++++++++++++++++---- 1 file changed, 22 insertions(+), 4 deletions(-) diff --git a/sound/soc/amd/acp-pcm-dma.c b/sound/soc/amd/acp-pcm-dma.c index 65c1033bd51c..eeb867767252 100644 --- a/sound/soc/amd/acp-pcm-dma.c +++ b/sound/soc/amd/acp-pcm-dma.c @@ -322,17 +322,27 @@ static void config_acp_dma(void __iomem *acp_mmio, struct audio_substream_data *rtd, u32 asic_type) { + u16 ch_acp_sysmem, ch_acp_i2s; + acp_pte_config(acp_mmio, rtd->pg, rtd->num_of_pages, rtd->pte_offset); + + if (rtd->direction == SNDRV_PCM_STREAM_PLAYBACK) { + ch_acp_sysmem = rtd->ch1; + ch_acp_i2s = rtd->ch2; + } else { + ch_acp_i2s = rtd->ch1; + ch_acp_sysmem = rtd->ch2; + } /* Configure System memory <-> ACP SRAM DMA descriptors */ set_acp_sysmem_dma_descriptors(acp_mmio, rtd->size, rtd->direction, rtd->pte_offset, - rtd->ch1, rtd->sram_bank, + ch_acp_sysmem, rtd->sram_bank, rtd->dma_dscr_idx_1, asic_type); /* Configure ACP SRAM <-> I2S DMA descriptors */ set_acp_to_i2s_dma_descriptors(acp_mmio, rtd->size, rtd->direction, rtd->sram_bank, - rtd->destination, rtd->ch2, + rtd->destination, ch_acp_i2s, rtd->dma_dscr_idx_2, asic_type); } @@ -995,16 +1005,24 @@ static int acp_dma_prepare(struct snd_pcm_substream *substream) { struct snd_pcm_runtime *runtime = substream->runtime; struct audio_substream_data *rtd = runtime->private_data; + u16 ch_acp_sysmem, ch_acp_i2s; if (!rtd) return -EINVAL; + if (rtd->direction == SNDRV_PCM_STREAM_PLAYBACK) { + ch_acp_sysmem = rtd->ch1; + ch_acp_i2s = rtd->ch2; + } else { + ch_acp_i2s = rtd->ch1; + ch_acp_sysmem = rtd->ch2; + } config_acp_dma_channel(rtd->acp_mmio, - rtd->ch1, + ch_acp_sysmem, rtd->dma_dscr_idx_1, NUM_DSCRS_PER_CHANNEL, 0); config_acp_dma_channel(rtd->acp_mmio, - rtd->ch2, + ch_acp_i2s, rtd->dma_dscr_idx_2, NUM_DSCRS_PER_CHANNEL, 0); return 0; -- cgit v1.2.3 From 19e023e3befb4cb64b4a81b47a92a0c687672661 Mon Sep 17 00:00:00 2001 From: "Agrawal, Akshu" Date: Mon, 16 Jul 2018 15:02:41 +0800 Subject: ASoC: AMD: For capture have interrupts on I2S->ACP channel Having interrupts enabled for ACP<->SYSMEM DMA transfer, we are in for an interrupt storm. For both playback and capture interrupts should be enabled for I2S<->ACP DMA. Signed-off-by: Akshu Agrawal Signed-off-by: Mark Brown --- sound/soc/amd/acp-pcm-dma.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/sound/soc/amd/acp-pcm-dma.c b/sound/soc/amd/acp-pcm-dma.c index eeb867767252..94bcf69008df 100644 --- a/sound/soc/amd/acp-pcm-dma.c +++ b/sound/soc/amd/acp-pcm-dma.c @@ -224,13 +224,11 @@ static void set_acp_sysmem_dma_descriptors(void __iomem *acp_mmio, switch (asic_type) { case CHIP_STONEY: dmadscr[i].xfer_val |= - BIT(22) | (ACP_DMA_ATTR_SHARED_MEM_TO_DAGB_GARLIC << 16) | (size / 2); break; default: dmadscr[i].xfer_val |= - BIT(22) | (ACP_DMA_ATTR_SHAREDMEM_TO_DAGB_ONION << 16) | (size / 2); } @@ -421,9 +419,9 @@ static void acp_dma_start(void __iomem *acp_mmio, u16 ch_num) switch (ch_num) { case ACP_TO_I2S_DMA_CH_NUM: - case ACP_TO_SYSRAM_CH_NUM: + case I2S_TO_ACP_DMA_CH_NUM: case ACP_TO_I2S_DMA_BT_INSTANCE_CH_NUM: - case ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM: + case I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM: dma_ctrl |= ACP_DMA_CNTL_0__DMAChIOCEn_MASK; break; default: @@ -705,18 +703,18 @@ static irqreturn_t dma_irq_handler(int irq, void *arg) acp_mmio, mmACP_EXTERNAL_INTR_STAT); } - if ((intr_flag & BIT(ACP_TO_SYSRAM_CH_NUM)) != 0) { + if ((intr_flag & BIT(I2S_TO_ACP_DMA_CH_NUM)) != 0) { valid_irq = true; snd_pcm_period_elapsed(irq_data->capture_i2ssp_stream); - acp_reg_write((intr_flag & BIT(ACP_TO_SYSRAM_CH_NUM)) << 16, + acp_reg_write((intr_flag & BIT(I2S_TO_ACP_DMA_CH_NUM)) << 16, acp_mmio, mmACP_EXTERNAL_INTR_STAT); } - if ((intr_flag & BIT(ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM)) != 0) { + if ((intr_flag & BIT(I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM)) != 0) { valid_irq = true; snd_pcm_period_elapsed(irq_data->capture_i2sbt_stream); acp_reg_write((intr_flag & - BIT(ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM)) << 16, + BIT(I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM)) << 16, acp_mmio, mmACP_EXTERNAL_INTR_STAT); } -- cgit v1.2.3 From b9952b5218added5577e4a3443969bc20884cea9 Mon Sep 17 00:00:00 2001 From: Frank Rowand Date: Thu, 12 Jul 2018 14:00:07 -0700 Subject: of: overlay: update phandle cache on overlay apply and remove A comment in the review of the patch adding the phandle cache said that the cache would have to be updated when modules are applied and removed. This patch implements the cache updates. Fixes: 0b3ce78e90fc ("of: cache phandle nodes to reduce cost of of_find_node_by_phandle()") Reported-by: Alan Tull Suggested-by: Alan Tull Signed-off-by: Frank Rowand Signed-off-by: Rob Herring --- drivers/of/base.c | 6 +++--- drivers/of/of_private.h | 2 ++ drivers/of/overlay.c | 11 +++++++++++ 3 files changed, 16 insertions(+), 3 deletions(-) diff --git a/drivers/of/base.c b/drivers/of/base.c index 848f549164cd..466e3c8582f0 100644 --- a/drivers/of/base.c +++ b/drivers/of/base.c @@ -102,7 +102,7 @@ static u32 phandle_cache_mask; * - the phandle lookup overhead reduction provided by the cache * will likely be less */ -static void of_populate_phandle_cache(void) +void of_populate_phandle_cache(void) { unsigned long flags; u32 cache_entries; @@ -134,8 +134,7 @@ out: raw_spin_unlock_irqrestore(&devtree_lock, flags); } -#ifndef CONFIG_MODULES -static int __init of_free_phandle_cache(void) +int of_free_phandle_cache(void) { unsigned long flags; @@ -148,6 +147,7 @@ static int __init of_free_phandle_cache(void) return 0; } +#if !defined(CONFIG_MODULES) late_initcall_sync(of_free_phandle_cache); #endif diff --git a/drivers/of/of_private.h b/drivers/of/of_private.h index 891d780c076a..216175d11d3d 100644 --- a/drivers/of/of_private.h +++ b/drivers/of/of_private.h @@ -79,6 +79,8 @@ int of_resolve_phandles(struct device_node *tree); #if defined(CONFIG_OF_OVERLAY) void of_overlay_mutex_lock(void); void of_overlay_mutex_unlock(void); +int of_free_phandle_cache(void); +void of_populate_phandle_cache(void); #else static inline void of_overlay_mutex_lock(void) {}; static inline void of_overlay_mutex_unlock(void) {}; diff --git a/drivers/of/overlay.c b/drivers/of/overlay.c index 7baa53e5b1d7..eda57ef12fd0 100644 --- a/drivers/of/overlay.c +++ b/drivers/of/overlay.c @@ -804,6 +804,8 @@ static int of_overlay_apply(const void *fdt, struct device_node *tree, goto err_free_overlay_changeset; } + of_populate_phandle_cache(); + ret = __of_changeset_apply_notify(&ovcs->cset); if (ret) pr_err("overlay changeset entry notify error %d\n", ret); @@ -1046,8 +1048,17 @@ int of_overlay_remove(int *ovcs_id) list_del(&ovcs->ovcs_list); + /* + * Disable phandle cache. Avoids race condition that would arise + * from removing cache entry when the associated node is deleted. + */ + of_free_phandle_cache(); + ret_apply = 0; ret = __of_changeset_revert_entries(&ovcs->cset, &ret_apply); + + of_populate_phandle_cache(); + if (ret) { if (ret_apply) devicetree_state_flags |= DTSF_REVERT_FAIL; -- cgit v1.2.3 From b58262396fabd43dc869b576e3defdd23b32fe94 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Wed, 11 Apr 2018 17:31:35 +0200 Subject: drm/imx: imx-ldb: disable LDB on driver bind The LVDS signal integrity is only guaranteed when the correct enable sequence (first IPU DI, then LDB) is used. If the LDB display output was active before the imx-drm driver is loaded (like when a bootsplash was active) the DI will be disabled by the full IPU reset we do when loading the driver. The LDB control registers are not part of the IPU range and thus will remain unchanged. This leads to the LDB still being active when the DI is getting enabled, effectively reversing the required enable sequence. Fix this by also disabling the LDB on driver bind. Signed-off-by: Lucas Stach Signed-off-by: Philipp Zabel --- drivers/gpu/drm/imx/imx-ldb.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/imx/imx-ldb.c b/drivers/gpu/drm/imx/imx-ldb.c index 56dd7a9a8e25..17974c0b4be8 100644 --- a/drivers/gpu/drm/imx/imx-ldb.c +++ b/drivers/gpu/drm/imx/imx-ldb.c @@ -612,6 +612,9 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data) return PTR_ERR(imx_ldb->regmap); } + /* disable LDB by resetting the control register to POR default */ + regmap_write(imx_ldb->regmap, IOMUXC_GPR2, 0); + imx_ldb->dev = dev; if (of_id) -- cgit v1.2.3 From c80d673b91a6c81d765864e10f2b15110ee900ad Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Wed, 11 Apr 2018 17:31:36 +0200 Subject: drm/imx: imx-ldb: check if channel is enabled before printing warning If the second LVDS channel has been disabled in the DT when using dual-channel mode we should not print a warning. Signed-off-by: Lucas Stach Signed-off-by: Philipp Zabel --- drivers/gpu/drm/imx/imx-ldb.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/imx/imx-ldb.c b/drivers/gpu/drm/imx/imx-ldb.c index 17974c0b4be8..dd5312b02a8d 100644 --- a/drivers/gpu/drm/imx/imx-ldb.c +++ b/drivers/gpu/drm/imx/imx-ldb.c @@ -655,14 +655,14 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data) if (ret || i < 0 || i > 1) return -EINVAL; + if (!of_device_is_available(child)) + continue; + if (dual && i > 0) { dev_warn(dev, "dual-channel mode, ignoring second output\n"); continue; } - if (!of_device_is_available(child)) - continue; - channel = &imx_ldb->channel[i]; channel->ldb = imx_ldb; channel->chno = i; -- cgit v1.2.3 From bbe4a089e299efe696ef520e58513c12c0d497c9 Mon Sep 17 00:00:00 2001 From: Steve Longerbeam Date: Thu, 31 May 2018 17:30:41 -0700 Subject: gpu: ipu-csi: Check for field type alternate When the CSI is receiving from a bt.656 bus, include a check for field type 'alternate' when determining whether to set CSI clock mode to CCIR656_INTERLACED or CCIR656_PROGRESSIVE. Signed-off-by: Steve Longerbeam Signed-off-by: Philipp Zabel --- drivers/gpu/ipu-v3/ipu-csi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/ipu-v3/ipu-csi.c b/drivers/gpu/ipu-v3/ipu-csi.c index caa05b0702e1..5450a2db1219 100644 --- a/drivers/gpu/ipu-v3/ipu-csi.c +++ b/drivers/gpu/ipu-v3/ipu-csi.c @@ -339,7 +339,8 @@ static void fill_csi_bus_cfg(struct ipu_csi_bus_config *csicfg, break; case V4L2_MBUS_BT656: csicfg->ext_vsync = 0; - if (V4L2_FIELD_HAS_BOTH(mbus_fmt->field)) + if (V4L2_FIELD_HAS_BOTH(mbus_fmt->field) || + mbus_fmt->field == V4L2_FIELD_ALTERNATE) csicfg->clk_mode = IPU_CSI_CLK_MODE_CCIR656_INTERLACED; else csicfg->clk_mode = IPU_CSI_CLK_MODE_CCIR656_PROGRESSIVE; -- cgit v1.2.3 From 38c0a74fe06da3be133cae3fb7bde6a9438e698b Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Thu, 12 Jul 2018 09:33:04 -0700 Subject: MIPS: Fix off-by-one in pci_resource_to_user() The MIPS implementation of pci_resource_to_user() introduced in v3.12 by commit 4c2924b725fb ("MIPS: PCI: Use pci_resource_to_user to map pci memory space properly") incorrectly sets *end to the address of the byte after the resource, rather than the last byte of the resource. This results in userland seeing resources as a byte larger than they actually are, for example a 32 byte BAR will be reported by a tool such as lspci as being 33 bytes in size: Region 2: I/O ports at 1000 [disabled] [size=33] Correct this by subtracting one from the calculated end address, reporting the correct address to userland. Signed-off-by: Paul Burton Reported-by: Rui Wang Fixes: 4c2924b725fb ("MIPS: PCI: Use pci_resource_to_user to map pci memory space properly") Cc: James Hogan Cc: Ralf Baechle Cc: Wolfgang Grandegger Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # v3.12+ Patchwork: https://patchwork.linux-mips.org/patch/19829/ --- arch/mips/pci/pci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c index 9632436d74d7..c2e94cf5ecda 100644 --- a/arch/mips/pci/pci.c +++ b/arch/mips/pci/pci.c @@ -54,5 +54,5 @@ void pci_resource_to_user(const struct pci_dev *dev, int bar, phys_addr_t size = resource_size(rsrc); *start = fixup_bigphys_addr(rsrc->start, size); - *end = rsrc->start + size; + *end = rsrc->start + size - 1; } -- cgit v1.2.3 From 6f6060a5c9cc76fdbc22748264e6aa3779ec2427 Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Mon, 9 Jul 2018 16:35:34 +0300 Subject: x86/apm: Don't access __preempt_count with zeroed fs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit APM_DO_POP_SEGS does not restore fs/gs which were zeroed by APM_DO_ZERO_SEGS. Trying to access __preempt_count with zeroed fs doesn't really work. Move the ibrs call outside the APM_DO_SAVE_SEGS/APM_DO_RESTORE_SEGS invocations so that fs is actually restored before calling preempt_enable(). Fixes the following sort of oopses: [ 0.313581] general protection fault: 0000 [#1] PREEMPT SMP [ 0.313803] Modules linked in: [ 0.314040] CPU: 0 PID: 268 Comm: kapmd Not tainted 4.16.0-rc1-triton-bisect-00090-gdd84441a7971 #19 [ 0.316161] EIP: __apm_bios_call_simple+0xc8/0x170 [ 0.316161] EFLAGS: 00210016 CPU: 0 [ 0.316161] EAX: 00000102 EBX: 00000000 ECX: 00000102 EDX: 00000000 [ 0.316161] ESI: 0000530e EDI: dea95f64 EBP: dea95f18 ESP: dea95ef0 [ 0.316161] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 [ 0.316161] CR0: 80050033 CR2: 00000000 CR3: 015d3000 CR4: 000006d0 [ 0.316161] Call Trace: [ 0.316161] ? cpumask_weight.constprop.15+0x20/0x20 [ 0.316161] on_cpu0+0x44/0x70 [ 0.316161] apm+0x54e/0x720 [ 0.316161] ? __switch_to_asm+0x26/0x40 [ 0.316161] ? __schedule+0x17d/0x590 [ 0.316161] kthread+0xc0/0xf0 [ 0.316161] ? proc_apm_show+0x150/0x150 [ 0.316161] ? kthread_create_worker_on_cpu+0x20/0x20 [ 0.316161] ret_from_fork+0x2e/0x38 [ 0.316161] Code: da 8e c2 8e e2 8e ea 57 55 2e ff 1d e0 bb 5d b1 0f 92 c3 5d 5f 07 1f 89 47 0c 90 8d b4 26 00 00 00 00 90 8d b4 26 00 00 00 00 90 <64> ff 0d 84 16 5c b1 74 7f 8b 45 dc 8e e0 8b 45 d8 8e e8 8b 45 [ 0.316161] EIP: __apm_bios_call_simple+0xc8/0x170 SS:ESP: 0068:dea95ef0 [ 0.316161] ---[ end trace 656253db2deaa12c ]--- Fixes: dd84441a7971 ("x86/speculation: Use IBRS if available before calling into firmware") Signed-off-by: Ville Syrjälä Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Cc: David Woodhouse Cc: "H. Peter Anvin" Cc: x86@kernel.org Cc: David Woodhouse Cc: "H. Peter Anvin" Link: https://lkml.kernel.org/r/20180709133534.5963-1-ville.syrjala@linux.intel.com --- arch/x86/include/asm/apm.h | 6 ------ arch/x86/kernel/apm_32.c | 5 +++++ 2 files changed, 5 insertions(+), 6 deletions(-) diff --git a/arch/x86/include/asm/apm.h b/arch/x86/include/asm/apm.h index c356098b6fb9..4d4015ddcf26 100644 --- a/arch/x86/include/asm/apm.h +++ b/arch/x86/include/asm/apm.h @@ -7,8 +7,6 @@ #ifndef _ASM_X86_MACH_DEFAULT_APM_H #define _ASM_X86_MACH_DEFAULT_APM_H -#include - #ifdef APM_ZERO_SEGS # define APM_DO_ZERO_SEGS \ "pushl %%ds\n\t" \ @@ -34,7 +32,6 @@ static inline void apm_bios_call_asm(u32 func, u32 ebx_in, u32 ecx_in, * N.B. We do NOT need a cld after the BIOS call * because we always save and restore the flags. */ - firmware_restrict_branch_speculation_start(); __asm__ __volatile__(APM_DO_ZERO_SEGS "pushl %%edi\n\t" "pushl %%ebp\n\t" @@ -47,7 +44,6 @@ static inline void apm_bios_call_asm(u32 func, u32 ebx_in, u32 ecx_in, "=S" (*esi) : "a" (func), "b" (ebx_in), "c" (ecx_in) : "memory", "cc"); - firmware_restrict_branch_speculation_end(); } static inline bool apm_bios_call_simple_asm(u32 func, u32 ebx_in, @@ -60,7 +56,6 @@ static inline bool apm_bios_call_simple_asm(u32 func, u32 ebx_in, * N.B. We do NOT need a cld after the BIOS call * because we always save and restore the flags. */ - firmware_restrict_branch_speculation_start(); __asm__ __volatile__(APM_DO_ZERO_SEGS "pushl %%edi\n\t" "pushl %%ebp\n\t" @@ -73,7 +68,6 @@ static inline bool apm_bios_call_simple_asm(u32 func, u32 ebx_in, "=S" (si) : "a" (func), "b" (ebx_in), "c" (ecx_in) : "memory", "cc"); - firmware_restrict_branch_speculation_end(); return error; } diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c index 5d0de79fdab0..ec00d1ff5098 100644 --- a/arch/x86/kernel/apm_32.c +++ b/arch/x86/kernel/apm_32.c @@ -240,6 +240,7 @@ #include #include #include +#include #if defined(CONFIG_APM_DISPLAY_BLANK) && defined(CONFIG_VT) extern int (*console_blank_hook)(int); @@ -614,11 +615,13 @@ static long __apm_bios_call(void *_call) gdt[0x40 / 8] = bad_bios_desc; apm_irq_save(flags); + firmware_restrict_branch_speculation_start(); APM_DO_SAVE_SEGS; apm_bios_call_asm(call->func, call->ebx, call->ecx, &call->eax, &call->ebx, &call->ecx, &call->edx, &call->esi); APM_DO_RESTORE_SEGS; + firmware_restrict_branch_speculation_end(); apm_irq_restore(flags); gdt[0x40 / 8] = save_desc_40; put_cpu(); @@ -690,10 +693,12 @@ static long __apm_bios_call_simple(void *_call) gdt[0x40 / 8] = bad_bios_desc; apm_irq_save(flags); + firmware_restrict_branch_speculation_start(); APM_DO_SAVE_SEGS; error = apm_bios_call_simple_asm(call->func, call->ebx, call->ecx, &call->eax); APM_DO_RESTORE_SEGS; + firmware_restrict_branch_speculation_end(); apm_irq_restore(flags); gdt[0x40 / 8] = save_desc_40; put_cpu(); -- cgit v1.2.3 From d7d94d48a272fd7583dc3c83acb8f5ed4ef456a4 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Mon, 16 Jul 2018 12:11:34 -0400 Subject: nbd: don't requeue the same request twice. We can race with the snd timeout and the per-request timeout and end up requeuing the same request twice. We can't use the send_complete completion to tell if everything is ok because we hold the tx_lock during send, so the timeout stuff will block waiting to mark the socket dead, and we could be marked complete and still requeue. Instead add a flag to the socket so we know whether we've been requeued yet. Signed-off-by: Josef Bacik Signed-off-by: Jens Axboe --- drivers/block/nbd.c | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-) diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index 74a05561b620..f8cf7d4cca7f 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -112,12 +112,15 @@ struct nbd_device { struct task_struct *task_setup; }; +#define NBD_CMD_REQUEUED 1 + struct nbd_cmd { struct nbd_device *nbd; int index; int cookie; struct completion send_complete; blk_status_t status; + unsigned long flags; }; #if IS_ENABLED(CONFIG_DEBUG_FS) @@ -146,6 +149,14 @@ static inline struct device *nbd_to_dev(struct nbd_device *nbd) return disk_to_dev(nbd->disk); } +static void nbd_requeue_cmd(struct nbd_cmd *cmd) +{ + struct request *req = blk_mq_rq_from_pdu(cmd); + + if (!test_and_set_bit(NBD_CMD_REQUEUED, &cmd->flags)) + blk_mq_requeue_request(req, true); +} + static const char *nbdcmd_to_ascii(int cmd) { switch (cmd) { @@ -343,7 +354,7 @@ static enum blk_eh_timer_return nbd_xmit_timeout(struct request *req, nbd_mark_nsock_dead(nbd, nsock, 1); mutex_unlock(&nsock->tx_lock); } - blk_mq_requeue_request(req, true); + nbd_requeue_cmd(cmd); nbd_config_put(nbd); return BLK_EH_DONE; } @@ -500,6 +511,7 @@ static int nbd_send_cmd(struct nbd_device *nbd, struct nbd_cmd *cmd, int index) nsock->pending = req; nsock->sent = sent; } + set_bit(NBD_CMD_REQUEUED, &cmd->flags); return BLK_STS_RESOURCE; } dev_err_ratelimited(disk_to_dev(nbd->disk), @@ -541,6 +553,7 @@ send_pages: */ nsock->pending = req; nsock->sent = sent; + set_bit(NBD_CMD_REQUEUED, &cmd->flags); return BLK_STS_RESOURCE; } dev_err(disk_to_dev(nbd->disk), @@ -805,7 +818,7 @@ again: */ blk_mq_start_request(req); if (unlikely(nsock->pending && nsock->pending != req)) { - blk_mq_requeue_request(req, true); + nbd_requeue_cmd(cmd); ret = 0; goto out; } @@ -818,7 +831,7 @@ again: dev_err_ratelimited(disk_to_dev(nbd->disk), "Request send failed, requeueing\n"); nbd_mark_nsock_dead(nbd, nsock, 1); - blk_mq_requeue_request(req, true); + nbd_requeue_cmd(cmd); ret = 0; } out: @@ -843,6 +856,7 @@ static blk_status_t nbd_queue_rq(struct blk_mq_hw_ctx *hctx, * done sending everything over the wire. */ init_completion(&cmd->send_complete); + clear_bit(NBD_CMD_REQUEUED, &cmd->flags); /* We can be called directly from the user space process, which means we * could possibly have signals pending so our sendmsg will fail. In @@ -1460,6 +1474,7 @@ static int nbd_init_request(struct blk_mq_tag_set *set, struct request *rq, { struct nbd_cmd *cmd = blk_mq_rq_to_pdu(rq); cmd->nbd = set->driver_data; + cmd->flags = 0; return 0; } -- cgit v1.2.3 From 8f3ea35929a0806ad1397db99a89ffee0140822a Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Mon, 16 Jul 2018 12:11:35 -0400 Subject: nbd: handle unexpected replies better If the server or network is misbehaving and we get an unexpected reply we can sometimes miss the request not being started and wait on a request and never get a response, or even double complete the same request. Fix this by replacing the send_complete completion with just a per command lock. Add a per command cookie as well so that we can know if we're getting a double completion for a previous event. Also check to make sure we dont have REQUEUED set as that means we raced with the timeout handler and need to just let the retry occur. Signed-off-by: Josef Bacik Signed-off-by: Jens Axboe --- drivers/block/nbd.c | 75 +++++++++++++++++++++++++++++++++++++++++++---------- 1 file changed, 61 insertions(+), 14 deletions(-) diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index f8cf7d4cca7f..3fb95c8d9fd8 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -116,11 +116,12 @@ struct nbd_device { struct nbd_cmd { struct nbd_device *nbd; + struct mutex lock; int index; int cookie; - struct completion send_complete; blk_status_t status; unsigned long flags; + u32 cmd_cookie; }; #if IS_ENABLED(CONFIG_DEBUG_FS) @@ -157,6 +158,27 @@ static void nbd_requeue_cmd(struct nbd_cmd *cmd) blk_mq_requeue_request(req, true); } +#define NBD_COOKIE_BITS 32 + +static u64 nbd_cmd_handle(struct nbd_cmd *cmd) +{ + struct request *req = blk_mq_rq_from_pdu(cmd); + u32 tag = blk_mq_unique_tag(req); + u64 cookie = cmd->cmd_cookie; + + return (cookie << NBD_COOKIE_BITS) | tag; +} + +static u32 nbd_handle_to_tag(u64 handle) +{ + return (u32)handle; +} + +static u32 nbd_handle_to_cookie(u64 handle) +{ + return (u32)(handle >> NBD_COOKIE_BITS); +} + static const char *nbdcmd_to_ascii(int cmd) { switch (cmd) { @@ -330,6 +352,9 @@ static enum blk_eh_timer_return nbd_xmit_timeout(struct request *req, } config = nbd->config; + if (!mutex_trylock(&cmd->lock)) + return BLK_EH_RESET_TIMER; + if (config->num_connections > 1) { dev_err_ratelimited(nbd_to_dev(nbd), "Connection timed out, retrying (%d/%d alive)\n", @@ -354,6 +379,7 @@ static enum blk_eh_timer_return nbd_xmit_timeout(struct request *req, nbd_mark_nsock_dead(nbd, nsock, 1); mutex_unlock(&nsock->tx_lock); } + mutex_unlock(&cmd->lock); nbd_requeue_cmd(cmd); nbd_config_put(nbd); return BLK_EH_DONE; @@ -364,6 +390,7 @@ static enum blk_eh_timer_return nbd_xmit_timeout(struct request *req, } set_bit(NBD_TIMEDOUT, &config->runtime_flags); cmd->status = BLK_STS_IOERR; + mutex_unlock(&cmd->lock); sock_shutdown(nbd); nbd_config_put(nbd); done: @@ -441,9 +468,9 @@ static int nbd_send_cmd(struct nbd_device *nbd, struct nbd_cmd *cmd, int index) struct iov_iter from; unsigned long size = blk_rq_bytes(req); struct bio *bio; + u64 handle; u32 type; u32 nbd_cmd_flags = 0; - u32 tag = blk_mq_unique_tag(req); int sent = nsock->sent, skip = 0; iov_iter_kvec(&from, WRITE | ITER_KVEC, &iov, 1, sizeof(request)); @@ -485,6 +512,8 @@ static int nbd_send_cmd(struct nbd_device *nbd, struct nbd_cmd *cmd, int index) goto send_pages; } iov_iter_advance(&from, sent); + } else { + cmd->cmd_cookie++; } cmd->index = index; cmd->cookie = nsock->cookie; @@ -493,7 +522,8 @@ static int nbd_send_cmd(struct nbd_device *nbd, struct nbd_cmd *cmd, int index) request.from = cpu_to_be64((u64)blk_rq_pos(req) << 9); request.len = htonl(size); } - memcpy(request.handle, &tag, sizeof(tag)); + handle = nbd_cmd_handle(cmd); + memcpy(request.handle, &handle, sizeof(handle)); dev_dbg(nbd_to_dev(nbd), "request %p: sending control (%s@%llu,%uB)\n", req, nbdcmd_to_ascii(type), @@ -586,10 +616,12 @@ static struct nbd_cmd *nbd_read_stat(struct nbd_device *nbd, int index) struct nbd_reply reply; struct nbd_cmd *cmd; struct request *req = NULL; + u64 handle; u16 hwq; u32 tag; struct kvec iov = {.iov_base = &reply, .iov_len = sizeof(reply)}; struct iov_iter to; + int ret = 0; reply.magic = 0; iov_iter_kvec(&to, READ | ITER_KVEC, &iov, 1, sizeof(reply)); @@ -607,8 +639,8 @@ static struct nbd_cmd *nbd_read_stat(struct nbd_device *nbd, int index) return ERR_PTR(-EPROTO); } - memcpy(&tag, reply.handle, sizeof(u32)); - + memcpy(&handle, reply.handle, sizeof(handle)); + tag = nbd_handle_to_tag(handle); hwq = blk_mq_unique_tag_to_hwq(tag); if (hwq < nbd->tag_set.nr_hw_queues) req = blk_mq_tag_to_rq(nbd->tag_set.tags[hwq], @@ -619,11 +651,25 @@ static struct nbd_cmd *nbd_read_stat(struct nbd_device *nbd, int index) return ERR_PTR(-ENOENT); } cmd = blk_mq_rq_to_pdu(req); + + mutex_lock(&cmd->lock); + if (cmd->cmd_cookie != nbd_handle_to_cookie(handle)) { + dev_err(disk_to_dev(nbd->disk), "Double reply on req %p, cmd_cookie %u, handle cookie %u\n", + req, cmd->cmd_cookie, nbd_handle_to_cookie(handle)); + ret = -ENOENT; + goto out; + } + if (test_bit(NBD_CMD_REQUEUED, &cmd->flags)) { + dev_err(disk_to_dev(nbd->disk), "Raced with timeout on req %p\n", + req); + ret = -ENOENT; + goto out; + } if (ntohl(reply.error)) { dev_err(disk_to_dev(nbd->disk), "Other side returned error (%d)\n", ntohl(reply.error)); cmd->status = BLK_STS_IOERR; - return cmd; + goto out; } dev_dbg(nbd_to_dev(nbd), "request %p: got reply\n", req); @@ -648,18 +694,18 @@ static struct nbd_cmd *nbd_read_stat(struct nbd_device *nbd, int index) if (nbd_disconnected(config) || config->num_connections <= 1) { cmd->status = BLK_STS_IOERR; - return cmd; + goto out; } - return ERR_PTR(-EIO); + ret = -EIO; + goto out; } dev_dbg(nbd_to_dev(nbd), "request %p: got %d bytes data\n", req, bvec.bv_len); } - } else { - /* See the comment in nbd_queue_rq. */ - wait_for_completion(&cmd->send_complete); } - return cmd; +out: + mutex_unlock(&cmd->lock); + return ret ? ERR_PTR(ret) : cmd; } static void recv_work(struct work_struct *work) @@ -855,7 +901,7 @@ static blk_status_t nbd_queue_rq(struct blk_mq_hw_ctx *hctx, * that the server is misbehaving (or there was an error) before we're * done sending everything over the wire. */ - init_completion(&cmd->send_complete); + mutex_lock(&cmd->lock); clear_bit(NBD_CMD_REQUEUED, &cmd->flags); /* We can be called directly from the user space process, which means we @@ -868,7 +914,7 @@ static blk_status_t nbd_queue_rq(struct blk_mq_hw_ctx *hctx, ret = BLK_STS_IOERR; else if (!ret) ret = BLK_STS_OK; - complete(&cmd->send_complete); + mutex_unlock(&cmd->lock); return ret; } @@ -1475,6 +1521,7 @@ static int nbd_init_request(struct blk_mq_tag_set *set, struct request *rq, struct nbd_cmd *cmd = blk_mq_rq_to_pdu(rq); cmd->nbd = set->driver_data; cmd->flags = 0; + mutex_init(&cmd->lock); return 0; } -- cgit v1.2.3 From d1b47a7c9efcf3c3384b70f6e3c8f1423b44d8c7 Mon Sep 17 00:00:00 2001 From: Pavel Tatashin Date: Mon, 16 Jul 2018 11:16:30 -0400 Subject: mm: don't do zero_resv_unavail if memmap is not allocated Moving zero_resv_unavail before memmap_init_zone(), caused a regression on x86-32. The cause is that we access struct pages before they are allocated when CONFIG_FLAT_NODE_MEM_MAP is used. free_area_init_nodes() zero_resv_unavail() mm_zero_struct_page(pfn_to_page(pfn)); <- struct page is not alloced free_area_init_node() if CONFIG_FLAT_NODE_MEM_MAP alloc_node_mem_map() memblock_virt_alloc_node_nopanic() <- struct page alloced here On the other hand memblock_virt_alloc_node_nopanic() zeroes all the memory that it returns, so we do not need to do zero_resv_unavail() here. Fixes: e181ae0c5db9 ("mm: zero unavailable pages before memmap init") Signed-off-by: Pavel Tatashin Tested-by: Matt Hart Acked-by: Michal Hocko Signed-off-by: Linus Torvalds --- include/linux/mm.h | 2 +- mm/page_alloc.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/include/linux/mm.h b/include/linux/mm.h index a0fbb9ffe380..3982c83fdcbf 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -2132,7 +2132,7 @@ extern int __meminit __early_pfn_to_nid(unsigned long pfn, struct mminit_pfnnid_cache *state); #endif -#ifdef CONFIG_HAVE_MEMBLOCK +#if defined(CONFIG_HAVE_MEMBLOCK) && !defined(CONFIG_FLAT_NODE_MEM_MAP) void zero_resv_unavail(void); #else static inline void zero_resv_unavail(void) {} diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 5d800d61ddb7..a790ef4be74e 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -6383,7 +6383,7 @@ void __paginginit free_area_init_node(int nid, unsigned long *zones_size, free_area_init_core(pgdat); } -#ifdef CONFIG_HAVE_MEMBLOCK +#if defined(CONFIG_HAVE_MEMBLOCK) && !defined(CONFIG_FLAT_NODE_MEM_MAP) /* * Only struct pages that are backed by physical memory are zeroed and * initialized by going through __init_single_page(). But, there are some @@ -6421,7 +6421,7 @@ void __paginginit zero_resv_unavail(void) if (pgcnt) pr_info("Reserved but unavailable: %lld pages", pgcnt); } -#endif /* CONFIG_HAVE_MEMBLOCK */ +#endif /* CONFIG_HAVE_MEMBLOCK && !CONFIG_FLAT_NODE_MEM_MAP */ #ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP -- cgit v1.2.3 From 6e2059b53f9885f202b086d7b4ca10a98926e974 Mon Sep 17 00:00:00 2001 From: Hangbin Liu Date: Tue, 10 Jul 2018 22:41:26 +0800 Subject: ipv4/igmp: init group mode as INCLUDE when join source group Based on RFC3376 5.1 If no interface state existed for that multicast address before the change (i.e., the change consisted of creating a new per-interface record), or if no state exists after the change (i.e., the change consisted of deleting a per-interface record), then the "non-existent" state is considered to have a filter mode of INCLUDE and an empty source list. Which means a new multicast group should start with state IN(). Function ip_mc_join_group() works correctly for IGMP ASM(Any-Source Multicast) mode. It adds a group with state EX() and inits crcount to mc_qrv, so the kernel will send a TO_EX() report message after adding group. But for IGMPv3 SSM(Source-specific multicast) JOIN_SOURCE_GROUP mode, we split the group joining into two steps. First we join the group like ASM, i.e. via ip_mc_join_group(). So the state changes from IN() to EX(). Then we add the source-specific address with INCLUDE mode. So the state changes from EX() to IN(A). Before the first step sends a group change record, we finished the second step. So we will only send the second change record. i.e. TO_IN(A). Regarding the RFC stands, we should actually send an ALLOW(A) message for SSM JOIN_SOURCE_GROUP as the state should mimic the 'IN() to IN(A)' transition. The issue was exposed by commit a052517a8ff65 ("net/multicast: should not send source list records when have filter mode change"). Before this change, we used to send both ALLOW(A) and TO_IN(A). After this change we only send TO_IN(A). Fix it by adding a new parameter to init group mode. Also add new wrapper functions so we don't need to change too much code. v1 -> v2: In my first version I only cleared the group change record. But this is not enough. Because when a new group join, it will init as EXCLUDE and trigger an filter mode change in ip/ip6_mc_add_src(), which will clear all source addresses' sf_crcount. This will prevent early joined address sending state change records if multi source addressed joined at the same time. In v2 patch, I fixed it by directly initializing the mode to INCLUDE for SSM JOIN_SOURCE_GROUP. I also split the original patch into two separated patches for IPv4 and IPv6. Fixes: a052517a8ff65 ("net/multicast: should not send source list records when have filter mode change") Reviewed-by: Stefano Brivio Signed-off-by: Hangbin Liu Signed-off-by: David S. Miller --- include/linux/igmp.h | 2 ++ net/ipv4/igmp.c | 58 ++++++++++++++++++++++++++++++++++++-------------- net/ipv4/ip_sockglue.c | 4 ++-- 3 files changed, 46 insertions(+), 18 deletions(-) diff --git a/include/linux/igmp.h b/include/linux/igmp.h index f8231854b5d6..119f53941c12 100644 --- a/include/linux/igmp.h +++ b/include/linux/igmp.h @@ -109,6 +109,8 @@ struct ip_mc_list { extern int ip_check_mc_rcu(struct in_device *dev, __be32 mc_addr, __be32 src_addr, u8 proto); extern int igmp_rcv(struct sk_buff *); extern int ip_mc_join_group(struct sock *sk, struct ip_mreqn *imr); +extern int ip_mc_join_group_ssm(struct sock *sk, struct ip_mreqn *imr, + unsigned int mode); extern int ip_mc_leave_group(struct sock *sk, struct ip_mreqn *imr); extern void ip_mc_drop_socket(struct sock *sk); extern int ip_mc_source(int add, int omode, struct sock *sk, diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c index 85b617b655bc..b3c899a630a0 100644 --- a/net/ipv4/igmp.c +++ b/net/ipv4/igmp.c @@ -1200,13 +1200,14 @@ static void igmpv3_del_delrec(struct in_device *in_dev, struct ip_mc_list *im) spin_lock_bh(&im->lock); if (pmc) { im->interface = pmc->interface; - im->crcount = in_dev->mr_qrv ?: net->ipv4.sysctl_igmp_qrv; im->sfmode = pmc->sfmode; if (pmc->sfmode == MCAST_INCLUDE) { im->tomb = pmc->tomb; im->sources = pmc->sources; for (psf = im->sources; psf; psf = psf->sf_next) - psf->sf_crcount = im->crcount; + psf->sf_crcount = in_dev->mr_qrv ?: net->ipv4.sysctl_igmp_qrv; + } else { + im->crcount = in_dev->mr_qrv ?: net->ipv4.sysctl_igmp_qrv; } in_dev_put(pmc->interface); kfree(pmc); @@ -1288,7 +1289,7 @@ static void igmp_group_dropped(struct ip_mc_list *im) #endif } -static void igmp_group_added(struct ip_mc_list *im) +static void igmp_group_added(struct ip_mc_list *im, unsigned int mode) { struct in_device *in_dev = im->interface; #ifdef CONFIG_IP_MULTICAST @@ -1316,7 +1317,13 @@ static void igmp_group_added(struct ip_mc_list *im) } /* else, v3 */ - im->crcount = in_dev->mr_qrv ?: net->ipv4.sysctl_igmp_qrv; + /* Based on RFC3376 5.1, for newly added INCLUDE SSM, we should + * not send filter-mode change record as the mode should be from + * IN() to IN(A). + */ + if (mode == MCAST_EXCLUDE) + im->crcount = in_dev->mr_qrv ?: net->ipv4.sysctl_igmp_qrv; + igmp_ifc_event(in_dev); #endif } @@ -1381,8 +1388,7 @@ static void ip_mc_hash_remove(struct in_device *in_dev, /* * A socket has joined a multicast group on device dev. */ - -void ip_mc_inc_group(struct in_device *in_dev, __be32 addr) +void __ip_mc_inc_group(struct in_device *in_dev, __be32 addr, unsigned int mode) { struct ip_mc_list *im; #ifdef CONFIG_IP_MULTICAST @@ -1394,7 +1400,7 @@ void ip_mc_inc_group(struct in_device *in_dev, __be32 addr) for_each_pmc_rtnl(in_dev, im) { if (im->multiaddr == addr) { im->users++; - ip_mc_add_src(in_dev, &addr, MCAST_EXCLUDE, 0, NULL, 0); + ip_mc_add_src(in_dev, &addr, mode, 0, NULL, 0); goto out; } } @@ -1408,8 +1414,8 @@ void ip_mc_inc_group(struct in_device *in_dev, __be32 addr) in_dev_hold(in_dev); im->multiaddr = addr; /* initial mode is (EX, empty) */ - im->sfmode = MCAST_EXCLUDE; - im->sfcount[MCAST_EXCLUDE] = 1; + im->sfmode = mode; + im->sfcount[mode] = 1; refcount_set(&im->refcnt, 1); spin_lock_init(&im->lock); #ifdef CONFIG_IP_MULTICAST @@ -1426,12 +1432,17 @@ void ip_mc_inc_group(struct in_device *in_dev, __be32 addr) #ifdef CONFIG_IP_MULTICAST igmpv3_del_delrec(in_dev, im); #endif - igmp_group_added(im); + igmp_group_added(im, mode); if (!in_dev->dead) ip_rt_multicast_event(in_dev); out: return; } + +void ip_mc_inc_group(struct in_device *in_dev, __be32 addr) +{ + __ip_mc_inc_group(in_dev, addr, MCAST_EXCLUDE); +} EXPORT_SYMBOL(ip_mc_inc_group); static int ip_mc_check_iphdr(struct sk_buff *skb) @@ -1688,7 +1699,7 @@ void ip_mc_remap(struct in_device *in_dev) #ifdef CONFIG_IP_MULTICAST igmpv3_del_delrec(in_dev, pmc); #endif - igmp_group_added(pmc); + igmp_group_added(pmc, pmc->sfmode); } } @@ -1751,7 +1762,7 @@ void ip_mc_up(struct in_device *in_dev) #ifdef CONFIG_IP_MULTICAST igmpv3_del_delrec(in_dev, pmc); #endif - igmp_group_added(pmc); + igmp_group_added(pmc, pmc->sfmode); } } @@ -2130,8 +2141,8 @@ static void ip_mc_clear_src(struct ip_mc_list *pmc) /* Join a multicast group */ - -int ip_mc_join_group(struct sock *sk, struct ip_mreqn *imr) +static int __ip_mc_join_group(struct sock *sk, struct ip_mreqn *imr, + unsigned int mode) { __be32 addr = imr->imr_multiaddr.s_addr; struct ip_mc_socklist *iml, *i; @@ -2172,15 +2183,30 @@ int ip_mc_join_group(struct sock *sk, struct ip_mreqn *imr) memcpy(&iml->multi, imr, sizeof(*imr)); iml->next_rcu = inet->mc_list; iml->sflist = NULL; - iml->sfmode = MCAST_EXCLUDE; + iml->sfmode = mode; rcu_assign_pointer(inet->mc_list, iml); - ip_mc_inc_group(in_dev, addr); + __ip_mc_inc_group(in_dev, addr, mode); err = 0; done: return err; } + +/* Join ASM (Any-Source Multicast) group + */ +int ip_mc_join_group(struct sock *sk, struct ip_mreqn *imr) +{ + return __ip_mc_join_group(sk, imr, MCAST_EXCLUDE); +} EXPORT_SYMBOL(ip_mc_join_group); +/* Join SSM (Source-Specific Multicast) group + */ +int ip_mc_join_group_ssm(struct sock *sk, struct ip_mreqn *imr, + unsigned int mode) +{ + return __ip_mc_join_group(sk, imr, mode); +} + static int ip_mc_leave_src(struct sock *sk, struct ip_mc_socklist *iml, struct in_device *in_dev) { diff --git a/net/ipv4/ip_sockglue.c b/net/ipv4/ip_sockglue.c index fc32fdbeefa6..64c76dcf7386 100644 --- a/net/ipv4/ip_sockglue.c +++ b/net/ipv4/ip_sockglue.c @@ -984,7 +984,7 @@ static int do_ip_setsockopt(struct sock *sk, int level, mreq.imr_multiaddr.s_addr = mreqs.imr_multiaddr; mreq.imr_address.s_addr = mreqs.imr_interface; mreq.imr_ifindex = 0; - err = ip_mc_join_group(sk, &mreq); + err = ip_mc_join_group_ssm(sk, &mreq, MCAST_INCLUDE); if (err && err != -EADDRINUSE) break; omode = MCAST_INCLUDE; @@ -1061,7 +1061,7 @@ static int do_ip_setsockopt(struct sock *sk, int level, mreq.imr_multiaddr = psin->sin_addr; mreq.imr_address.s_addr = 0; mreq.imr_ifindex = greqs.gsr_interface; - err = ip_mc_join_group(sk, &mreq); + err = ip_mc_join_group_ssm(sk, &mreq, MCAST_INCLUDE); if (err && err != -EADDRINUSE) break; greqs.gsr_interface = mreq.imr_ifindex; -- cgit v1.2.3 From c7ea20c9da5b94e400c8dcc0adb99411f2e430a6 Mon Sep 17 00:00:00 2001 From: Hangbin Liu Date: Tue, 10 Jul 2018 22:41:27 +0800 Subject: ipv6/mcast: init as INCLUDE when join SSM INCLUDE group This an IPv6 version patch of "ipv4/igmp: init group mode as INCLUDE when join source group". From RFC3810, part 6.1: If no per-interface state existed for that multicast address before the change (i.e., the change consisted of creating a new per-interface record), or if no state exists after the change (i.e., the change consisted of deleting a per-interface record), then the "non-existent" state is considered to have an INCLUDE filter mode and an empty source list. Which means a new multicast group should start with state IN(). Currently, for MLDv2 SSM JOIN_SOURCE_GROUP mode, we first call ipv6_sock_mc_join(), then ip6_mc_source(), which will trigger a TO_IN() message instead of ALLOW(). The issue was exposed by commit a052517a8ff65 ("net/multicast: should not send source list records when have filter mode change"). Before this change, we sent both ALLOW(A) and TO_IN(A). Now, we only send TO_IN(A). Fix it by adding a new parameter to init group mode. Also add some wrapper functions to avoid changing too much code. v1 -> v2: In the first version I only cleared the group change record. But this is not enough. Because when a new group join, it will init as EXCLUDE and trigger a filter mode change in ip/ip6_mc_add_src(), which will clear all source addresses sf_crcount. This will prevent early joined address sending state change records if multi source addressed joined at the same time. In v2 patch, I fixed it by directly initializing the mode to INCLUDE for SSM JOIN_SOURCE_GROUP. I also split the original patch into two separated patches for IPv4 and IPv6. There is also a difference between v4 and v6 version. For IPv6, when the interface goes down and up, we will send correct state change record with unspecified IPv6 address (::) with function ipv6_mc_up(). But after DAD is completed, we resend the change record TO_IN() in mld_send_initial_cr(). Fix it by sending ALLOW() for INCLUDE mode in mld_send_initial_cr(). Fixes: a052517a8ff65 ("net/multicast: should not send source list records when have filter mode change") Reviewed-by: Stefano Brivio Signed-off-by: Hangbin Liu Signed-off-by: David S. Miller --- include/net/ipv6.h | 2 ++ net/ipv6/ipv6_sockglue.c | 5 ++-- net/ipv6/mcast.c | 64 ++++++++++++++++++++++++++++++++++-------------- 3 files changed, 50 insertions(+), 21 deletions(-) diff --git a/include/net/ipv6.h b/include/net/ipv6.h index d02881e4ad1f..7528632bcf2a 100644 --- a/include/net/ipv6.h +++ b/include/net/ipv6.h @@ -1100,6 +1100,8 @@ void ipv6_sysctl_unregister(void); int ipv6_sock_mc_join(struct sock *sk, int ifindex, const struct in6_addr *addr); +int ipv6_sock_mc_join_ssm(struct sock *sk, int ifindex, + const struct in6_addr *addr, unsigned int mode); int ipv6_sock_mc_drop(struct sock *sk, int ifindex, const struct in6_addr *addr); #endif /* _NET_IPV6_H */ diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c index c95c3486d904..568ca4187cd1 100644 --- a/net/ipv6/ipv6_sockglue.c +++ b/net/ipv6/ipv6_sockglue.c @@ -729,8 +729,9 @@ done: struct sockaddr_in6 *psin6; psin6 = (struct sockaddr_in6 *)&greqs.gsr_group; - retv = ipv6_sock_mc_join(sk, greqs.gsr_interface, - &psin6->sin6_addr); + retv = ipv6_sock_mc_join_ssm(sk, greqs.gsr_interface, + &psin6->sin6_addr, + MCAST_INCLUDE); /* prior join w/ different source is ok */ if (retv && retv != -EADDRINUSE) break; diff --git a/net/ipv6/mcast.c b/net/ipv6/mcast.c index c0c74088f2af..2699be7202be 100644 --- a/net/ipv6/mcast.c +++ b/net/ipv6/mcast.c @@ -95,6 +95,8 @@ static int ip6_mc_add_src(struct inet6_dev *idev, const struct in6_addr *pmca, int delta); static int ip6_mc_leave_src(struct sock *sk, struct ipv6_mc_socklist *iml, struct inet6_dev *idev); +static int __ipv6_dev_mc_inc(struct net_device *dev, + const struct in6_addr *addr, unsigned int mode); #define MLD_QRV_DEFAULT 2 /* RFC3810, 9.2. Query Interval */ @@ -132,7 +134,8 @@ static int unsolicited_report_interval(struct inet6_dev *idev) return iv > 0 ? iv : 1; } -int ipv6_sock_mc_join(struct sock *sk, int ifindex, const struct in6_addr *addr) +static int __ipv6_sock_mc_join(struct sock *sk, int ifindex, + const struct in6_addr *addr, unsigned int mode) { struct net_device *dev = NULL; struct ipv6_mc_socklist *mc_lst; @@ -179,7 +182,7 @@ int ipv6_sock_mc_join(struct sock *sk, int ifindex, const struct in6_addr *addr) } mc_lst->ifindex = dev->ifindex; - mc_lst->sfmode = MCAST_EXCLUDE; + mc_lst->sfmode = mode; rwlock_init(&mc_lst->sflock); mc_lst->sflist = NULL; @@ -187,7 +190,7 @@ int ipv6_sock_mc_join(struct sock *sk, int ifindex, const struct in6_addr *addr) * now add/increase the group membership on the device */ - err = ipv6_dev_mc_inc(dev, addr); + err = __ipv6_dev_mc_inc(dev, addr, mode); if (err) { sock_kfree_s(sk, mc_lst, sizeof(*mc_lst)); @@ -199,8 +202,19 @@ int ipv6_sock_mc_join(struct sock *sk, int ifindex, const struct in6_addr *addr) return 0; } + +int ipv6_sock_mc_join(struct sock *sk, int ifindex, const struct in6_addr *addr) +{ + return __ipv6_sock_mc_join(sk, ifindex, addr, MCAST_EXCLUDE); +} EXPORT_SYMBOL(ipv6_sock_mc_join); +int ipv6_sock_mc_join_ssm(struct sock *sk, int ifindex, + const struct in6_addr *addr, unsigned int mode) +{ + return __ipv6_sock_mc_join(sk, ifindex, addr, mode); +} + /* * socket leave on multicast group */ @@ -646,7 +660,7 @@ bool inet6_mc_check(struct sock *sk, const struct in6_addr *mc_addr, return rv; } -static void igmp6_group_added(struct ifmcaddr6 *mc) +static void igmp6_group_added(struct ifmcaddr6 *mc, unsigned int mode) { struct net_device *dev = mc->idev->dev; char buf[MAX_ADDR_LEN]; @@ -672,7 +686,13 @@ static void igmp6_group_added(struct ifmcaddr6 *mc) } /* else v2 */ - mc->mca_crcount = mc->idev->mc_qrv; + /* Based on RFC3810 6.1, for newly added INCLUDE SSM, we + * should not send filter-mode change record as the mode + * should be from IN() to IN(A). + */ + if (mode == MCAST_EXCLUDE) + mc->mca_crcount = mc->idev->mc_qrv; + mld_ifc_event(mc->idev); } @@ -770,13 +790,14 @@ static void mld_del_delrec(struct inet6_dev *idev, struct ifmcaddr6 *im) spin_lock_bh(&im->mca_lock); if (pmc) { im->idev = pmc->idev; - im->mca_crcount = idev->mc_qrv; im->mca_sfmode = pmc->mca_sfmode; if (pmc->mca_sfmode == MCAST_INCLUDE) { im->mca_tomb = pmc->mca_tomb; im->mca_sources = pmc->mca_sources; for (psf = im->mca_sources; psf; psf = psf->sf_next) - psf->sf_crcount = im->mca_crcount; + psf->sf_crcount = idev->mc_qrv; + } else { + im->mca_crcount = idev->mc_qrv; } in6_dev_put(pmc->idev); kfree(pmc); @@ -831,7 +852,8 @@ static void ma_put(struct ifmcaddr6 *mc) } static struct ifmcaddr6 *mca_alloc(struct inet6_dev *idev, - const struct in6_addr *addr) + const struct in6_addr *addr, + unsigned int mode) { struct ifmcaddr6 *mc; @@ -849,9 +871,8 @@ static struct ifmcaddr6 *mca_alloc(struct inet6_dev *idev, refcount_set(&mc->mca_refcnt, 1); spin_lock_init(&mc->mca_lock); - /* initial mode is (EX, empty) */ - mc->mca_sfmode = MCAST_EXCLUDE; - mc->mca_sfcount[MCAST_EXCLUDE] = 1; + mc->mca_sfmode = mode; + mc->mca_sfcount[mode] = 1; if (ipv6_addr_is_ll_all_nodes(&mc->mca_addr) || IPV6_ADDR_MC_SCOPE(&mc->mca_addr) < IPV6_ADDR_SCOPE_LINKLOCAL) @@ -863,7 +884,8 @@ static struct ifmcaddr6 *mca_alloc(struct inet6_dev *idev, /* * device multicast group inc (add if not found) */ -int ipv6_dev_mc_inc(struct net_device *dev, const struct in6_addr *addr) +static int __ipv6_dev_mc_inc(struct net_device *dev, + const struct in6_addr *addr, unsigned int mode) { struct ifmcaddr6 *mc; struct inet6_dev *idev; @@ -887,14 +909,13 @@ int ipv6_dev_mc_inc(struct net_device *dev, const struct in6_addr *addr) if (ipv6_addr_equal(&mc->mca_addr, addr)) { mc->mca_users++; write_unlock_bh(&idev->lock); - ip6_mc_add_src(idev, &mc->mca_addr, MCAST_EXCLUDE, 0, - NULL, 0); + ip6_mc_add_src(idev, &mc->mca_addr, mode, 0, NULL, 0); in6_dev_put(idev); return 0; } } - mc = mca_alloc(idev, addr); + mc = mca_alloc(idev, addr, mode); if (!mc) { write_unlock_bh(&idev->lock); in6_dev_put(idev); @@ -911,11 +932,16 @@ int ipv6_dev_mc_inc(struct net_device *dev, const struct in6_addr *addr) write_unlock_bh(&idev->lock); mld_del_delrec(idev, mc); - igmp6_group_added(mc); + igmp6_group_added(mc, mode); ma_put(mc); return 0; } +int ipv6_dev_mc_inc(struct net_device *dev, const struct in6_addr *addr) +{ + return __ipv6_dev_mc_inc(dev, addr, MCAST_EXCLUDE); +} + /* * device multicast group del */ @@ -1751,7 +1777,7 @@ static struct sk_buff *add_grec(struct sk_buff *skb, struct ifmcaddr6 *pmc, psf_next = psf->sf_next; - if (!is_in(pmc, psf, type, gdeleted, sdeleted)) { + if (!is_in(pmc, psf, type, gdeleted, sdeleted) && !crsend) { psf_prev = psf; continue; } @@ -2066,7 +2092,7 @@ static void mld_send_initial_cr(struct inet6_dev *idev) if (pmc->mca_sfcount[MCAST_EXCLUDE]) type = MLD2_CHANGE_TO_EXCLUDE; else - type = MLD2_CHANGE_TO_INCLUDE; + type = MLD2_ALLOW_NEW_SOURCES; skb = add_grec(skb, pmc, type, 0, 0, 1); spin_unlock_bh(&pmc->mca_lock); } @@ -2546,7 +2572,7 @@ void ipv6_mc_up(struct inet6_dev *idev) ipv6_mc_reset(idev); for (i = idev->mc_list; i; i = i->next) { mld_del_delrec(idev, i); - igmp6_group_added(i); + igmp6_group_added(i, i->mca_sfmode); } read_unlock_bh(&idev->lock); } -- cgit v1.2.3 From c604cb767049b78b3075497b80ebb8fd530ea2cc Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Wed, 11 Jul 2018 10:46:29 -0700 Subject: KEYS: DNS: fix parsing multiple options My recent fix for dns_resolver_preparse() printing very long strings was incomplete, as shown by syzbot which still managed to hit the WARN_ONCE() in set_precision() by adding a crafted "dns_resolver" key: precision 50001 too large WARNING: CPU: 7 PID: 864 at lib/vsprintf.c:2164 vsnprintf+0x48a/0x5a0 The bug this time isn't just a printing bug, but also a logical error when multiple options ("#"-separated strings) are given in the key payload. Specifically, when separating an option string into name and value, if there is no value then the name is incorrectly considered to end at the end of the key payload, rather than the end of the current option. This bypasses validation of the option length, and also means that specifying multiple options is broken -- which presumably has gone unnoticed as there is currently only one valid option anyway. A similar problem also applied to option values, as the kstrtoul() when parsing the "dnserror" option will read past the end of the current option and into the next option. Fix these bugs by correctly computing the length of the option name and by copying the option value, null-terminated, into a temporary buffer. Reproducer for the WARN_ONCE() that syzbot hit: perl -e 'print "#A#", "\0" x 50000' | keyctl padd dns_resolver desc @s Reproducer for "dnserror" option being parsed incorrectly (expected behavior is to fail when seeing the unknown option "foo", actual behavior was to read the dnserror value as "1#foo" and fail there): perl -e 'print "#dnserror=1#foo\0"' | keyctl padd dns_resolver desc @s Reported-by: syzbot Fixes: 4a2d789267e0 ("DNS: If the DNS server returns an error, allow that to be cached [ver #2]") Signed-off-by: Eric Biggers Signed-off-by: David S. Miller --- net/dns_resolver/dns_key.c | 28 ++++++++++++++++------------ 1 file changed, 16 insertions(+), 12 deletions(-) diff --git a/net/dns_resolver/dns_key.c b/net/dns_resolver/dns_key.c index 40c851693f77..0c9478b91fa5 100644 --- a/net/dns_resolver/dns_key.c +++ b/net/dns_resolver/dns_key.c @@ -86,35 +86,39 @@ dns_resolver_preparse(struct key_preparsed_payload *prep) opt++; kdebug("options: '%s'", opt); do { + int opt_len, opt_nlen; const char *eq; - int opt_len, opt_nlen, opt_vlen, tmp; + char optval[128]; next_opt = memchr(opt, '#', end - opt) ?: end; opt_len = next_opt - opt; - if (opt_len <= 0 || opt_len > 128) { + if (opt_len <= 0 || opt_len > sizeof(optval)) { pr_warn_ratelimited("Invalid option length (%d) for dns_resolver key\n", opt_len); return -EINVAL; } - eq = memchr(opt, '=', opt_len) ?: end; - opt_nlen = eq - opt; - eq++; - opt_vlen = next_opt - eq; /* will be -1 if no value */ + eq = memchr(opt, '=', opt_len); + if (eq) { + opt_nlen = eq - opt; + eq++; + memcpy(optval, eq, next_opt - eq); + optval[next_opt - eq] = '\0'; + } else { + opt_nlen = opt_len; + optval[0] = '\0'; + } - tmp = opt_vlen >= 0 ? opt_vlen : 0; - kdebug("option '%*.*s' val '%*.*s'", - opt_nlen, opt_nlen, opt, tmp, tmp, eq); + kdebug("option '%*.*s' val '%s'", + opt_nlen, opt_nlen, opt, optval); /* see if it's an error number representing a DNS error * that's to be recorded as the result in this key */ if (opt_nlen == sizeof(DNS_ERRORNO_OPTION) - 1 && memcmp(opt, DNS_ERRORNO_OPTION, opt_nlen) == 0) { kdebug("dns error number option"); - if (opt_vlen <= 0) - goto bad_option_value; - ret = kstrtoul(eq, 10, &derrno); + ret = kstrtoul(optval, 10, &derrno); if (ret < 0) goto bad_option_value; -- cgit v1.2.3 From 24d4e34f7a6157f313f7e0985944180e6a7d223d Mon Sep 17 00:00:00 2001 From: Constantine Shulyupin Date: Thu, 12 Jul 2018 08:28:46 +0300 Subject: scripts/tags.sh: Add BPF_CALL Signed-off-by: Constantine Shulyupin Acked-by: Alexei Starovoitov Acked-by: Daniel Borkmann Signed-off-by: David S. Miller --- scripts/tags.sh | 1 + 1 file changed, 1 insertion(+) diff --git a/scripts/tags.sh b/scripts/tags.sh index 66f08bb1cce9..db0d56ebe9b9 100755 --- a/scripts/tags.sh +++ b/scripts/tags.sh @@ -152,6 +152,7 @@ regex_asm=( ) regex_c=( '/^SYSCALL_DEFINE[0-9](\([[:alnum:]_]*\).*/sys_\1/' + '/^BPF_CALL_[0-9](\([[:alnum:]_]*\).*/\1/' '/^COMPAT_SYSCALL_DEFINE[0-9](\([[:alnum:]_]*\).*/compat_sys_\1/' '/^TRACE_EVENT(\([[:alnum:]_]*\).*/trace_\1/' '/^TRACE_EVENT(\([[:alnum:]_]*\).*/trace_\1_rcuidle/' -- cgit v1.2.3 From 32da12216e467dea70a09cd7094c30779ce0f9db Mon Sep 17 00:00:00 2001 From: Dave Watson Date: Thu, 12 Jul 2018 08:03:43 -0700 Subject: tls: Stricter error checking in zerocopy sendmsg path In the zerocopy sendmsg() path, there are error checks to revert the zerocopy if we get any error code. syzkaller has discovered that tls_push_record can return -ECONNRESET, which is fatal, and happens after the point at which it is safe to revert the iter, as we've already passed the memory to do_tcp_sendpages. Previously this code could return -ENOMEM and we would want to revert the iter, but AFAIK this no longer returns ENOMEM after a447da7d004 ("tls: fix waitall behavior in tls_sw_recvmsg"), so we fail for all error codes. Reported-by: syzbot+c226690f7b3126c5ee04@syzkaller.appspotmail.com Reported-by: syzbot+709f2810a6a05f11d4d3@syzkaller.appspotmail.com Signed-off-by: Dave Watson Fixes: 3c4d7559159b ("tls: kernel TLS support") Signed-off-by: David S. Miller --- net/tls/tls_sw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/tls/tls_sw.c b/net/tls/tls_sw.c index 7818011fd250..4618f1c31137 100644 --- a/net/tls/tls_sw.c +++ b/net/tls/tls_sw.c @@ -440,7 +440,7 @@ alloc_encrypted: ret = tls_push_record(sk, msg->msg_flags, record_type); if (!ret) continue; - if (ret == -EAGAIN) + if (ret < 0) goto send_end; copied -= try_to_copy; -- cgit v1.2.3 From 9f80a0723bf0401da63b75709a0e3f31cd4b9446 Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Fri, 13 Jul 2018 01:05:17 +0900 Subject: bonding: Fix a typo in bonding.txt This patch fixes a spelling typo in bonding.txt Signed-off-by: Masanari Iida Signed-off-by: David S. Miller --- Documentation/networking/bonding.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt index c13214d073a4..d3e5dd26db12 100644 --- a/Documentation/networking/bonding.txt +++ b/Documentation/networking/bonding.txt @@ -1490,7 +1490,7 @@ To remove an ARP target: To configure the interval between learning packet transmits: # echo 12 > /sys/class/net/bond0/bonding/lp_interval - NOTE: the lp_inteval is the number of seconds between instances where + NOTE: the lp_interval is the number of seconds between instances where the bonding driver sends learning packets to each slaves peer switch. The default interval is 1 second. -- cgit v1.2.3 From 6e8cfd6d9d8049e2fd5b2de8a328519dc58ea1e6 Mon Sep 17 00:00:00 2001 From: Toshiaki Makita Date: Fri, 13 Jul 2018 13:24:38 +0900 Subject: tun: Fix use-after-free on XDP_TX On XDP_TX we need to free up the frame only when tun_xdp_tx() returns a negative value. A positive value indicates that the packet is successfully enqueued to the ptr_ring, so freeing the page causes use-after-free. Fixes: 735fc4054b3a ("xdp: change ndo_xdp_xmit API to support bulking") Signed-off-by: Toshiaki Makita Acked-by: Jason Wang Acked-by: Jesper Dangaard Brouer Signed-off-by: David S. Miller --- drivers/net/tun.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/tun.c b/drivers/net/tun.c index a192a017cc68..f5727baac84a 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -1688,7 +1688,7 @@ static struct sk_buff *tun_build_skb(struct tun_struct *tun, case XDP_TX: get_page(alloc_frag->page); alloc_frag->offset += buflen; - if (tun_xdp_tx(tun->dev, &xdp)) + if (tun_xdp_tx(tun->dev, &xdp) < 0) goto err_redirect; rcu_read_unlock(); local_bh_enable(); -- cgit v1.2.3 From b7ed879425be371905d856410d19e9a42a62bcf3 Mon Sep 17 00:00:00 2001 From: Prashant Bhole Date: Fri, 13 Jul 2018 14:40:50 +0900 Subject: net: ip6_gre: get ipv6hdr after skb_cow_head() A KASAN:use-after-free bug was found related to ip6-erspan while running selftests/net/ip6_gre_headroom.sh It happens because of following sequence: - ipv6hdr pointer is obtained from skb - skb_cow_head() is called, skb->head memory is reallocated - old data is accessed using ipv6hdr pointer skb_cow_head() call was added in e41c7c68ea77 ("ip6erspan: make sure enough headroom at xmit."), but looking at the history there was a chance of similar bug because gre_handle_offloads() and pskb_trim() can also reallocate skb->head memory. Fixes tag points to commit which introduced possibility of this bug. This patch moves ipv6hdr pointer assignment after skb_cow_head() call. Fixes: 5a963eb61b7c ("ip6_gre: Add ERSPAN native tunnel support") Signed-off-by: Prashant Bhole Reviewed-by: Greg Rose Acked-by: William Tu Signed-off-by: David S. Miller --- net/ipv6/ip6_gre.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/ipv6/ip6_gre.c b/net/ipv6/ip6_gre.c index c8cf2fdbb13b..cd2cfb04e5d8 100644 --- a/net/ipv6/ip6_gre.c +++ b/net/ipv6/ip6_gre.c @@ -927,7 +927,6 @@ tx_err: static netdev_tx_t ip6erspan_tunnel_xmit(struct sk_buff *skb, struct net_device *dev) { - struct ipv6hdr *ipv6h = ipv6_hdr(skb); struct ip6_tnl *t = netdev_priv(dev); struct dst_entry *dst = skb_dst(skb); struct net_device_stats *stats; @@ -1010,6 +1009,8 @@ static netdev_tx_t ip6erspan_tunnel_xmit(struct sk_buff *skb, goto tx_err; } } else { + struct ipv6hdr *ipv6h = ipv6_hdr(skb); + switch (skb->protocol) { case htons(ETH_P_IP): memset(&(IPCB(skb)->opt), 0, sizeof(IPCB(skb)->opt)); -- cgit v1.2.3 From 56c266dcfa0c3290d73b1fd5dc736aaa7d23e3ef Mon Sep 17 00:00:00 2001 From: Corentin Labbe Date: Fri, 13 Jul 2018 11:48:42 +0000 Subject: net: stmmac: dwmac-sun8i: fix typo descrive => describe This patch fix a typo in the word Describe Signed-off-by: Corentin Labbe Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c index 2e6e2a96b4f2..f9a61f90cfbc 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c @@ -37,7 +37,7 @@ * is done in the "stmmac files" */ -/* struct emac_variant - Descrive dwmac-sun8i hardware variant +/* struct emac_variant - Describe dwmac-sun8i hardware variant * @default_syscon_value: The default value of the EMAC register in syscon * This value is used for disabling properly EMAC * and used as a good starting value in case of the -- cgit v1.2.3 From 014dd7684e75730fa8d25bc7583534db141e5ded Mon Sep 17 00:00:00 2001 From: Corentin Labbe Date: Fri, 13 Jul 2018 11:50:15 +0000 Subject: net: ethernet: stmmac: fix documentation warning This patch remove the following documentation warning drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c:103: warning: Excess function parameter 'priv' description in 'stmmac_axi_setup' It was introduced in commit afea03656add7 ("stmmac: rework DMA bus setting and introduce new platform AXI structure") Signed-off-by: Corentin Labbe Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index 6d141f3931eb..72da77b94ecd 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -94,7 +94,6 @@ static int dwmac1000_validate_ucast_entries(int ucast_entries) /** * stmmac_axi_setup - parse DT parameters for programming the AXI register * @pdev: platform device - * @priv: driver private struct. * Description: * if required, from device-tree the AXI internal register can be tuned * by using platform parameters. -- cgit v1.2.3 From e66515999b627368892ccc9b3a13a506f2ea1357 Mon Sep 17 00:00:00 2001 From: Sabrina Dubroca Date: Fri, 13 Jul 2018 17:21:42 +0200 Subject: ipv6: make DAD fail with enhanced DAD when nonce length differs Commit adc176c54722 ("ipv6 addrconf: Implemented enhanced DAD (RFC7527)") added enhanced DAD with a nonce length of 6 bytes. However, RFC7527 doesn't specify the length of the nonce, other than being 6 + 8*k bytes, with integer k >= 0 (RFC3971 5.3.2). The current implementation simply assumes that the nonce will always be 6 bytes, but others systems are free to choose different sizes. If another system sends a nonce of different length but with the same 6 bytes prefix, it shouldn't be considered as the same nonce. Thus, check that the length of the received nonce is the same as the length we sent. Ugly scapy test script running on veth0: def loop(): pkt=sniff(iface="veth0", filter="icmp6", count=1) pkt = pkt[0] b = bytearray(pkt[Raw].load) b[1] += 1 b += b'\xde\xad\xbe\xef\xde\xad\xbe\xef' pkt[Raw].load = bytes(b) pkt[IPv6].plen += 8 # fixup checksum after modifying the payload pkt[IPv6].payload.cksum -= 0x3b44 if pkt[IPv6].payload.cksum < 0: pkt[IPv6].payload.cksum += 0xffff sendp(pkt, iface="veth0") This should result in DAD failure for any address added to veth0's peer, but is currently ignored. Fixes: adc176c54722 ("ipv6 addrconf: Implemented enhanced DAD (RFC7527)") Signed-off-by: Sabrina Dubroca Reviewed-by: Stefano Brivio Signed-off-by: David S. Miller --- net/ipv6/ndisc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c index e640d2f3c55c..0ec273997d1d 100644 --- a/net/ipv6/ndisc.c +++ b/net/ipv6/ndisc.c @@ -811,7 +811,7 @@ static void ndisc_recv_ns(struct sk_buff *skb) return; } } - if (ndopts.nd_opts_nonce) + if (ndopts.nd_opts_nonce && ndopts.nd_opts_nonce->nd_opt_len == 1) memcpy(&nonce, (u8 *)(ndopts.nd_opts_nonce + 1), 6); inc = ipv6_addr_is_multicast(daddr); -- cgit v1.2.3 From 2d14d3795294d42aacc278948984a480569bcc23 Mon Sep 17 00:00:00 2001 From: Thomas Falcon Date: Fri, 13 Jul 2018 12:03:32 -0500 Subject: ibmvnic: Revise RX/TX queue error messages During a device failover, there may be latency between the loss of the current backing device and a notification from firmware that a failover has occurred. This latency can result in a large amount of error printouts as firmware returns outgoing traffic with a generic error code. These are not necessarily errors in this case as the firmware is busy swapping in a new backing adapter and is not ready to send packets yet. This patch reclassifies those error codes as warnings with an explanation that a failover may be pending. All other return codes will be considered errors. Signed-off-by: Thomas Falcon Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ibmvnic.c | 39 ++++++++++++++++++++++++++------------ 1 file changed, 27 insertions(+), 12 deletions(-) diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index d0e196bff081..c50963680f30 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -329,7 +329,8 @@ static void replenish_rx_pool(struct ibmvnic_adapter *adapter, return; failure: - dev_info(dev, "replenish pools failure\n"); + if (lpar_rc != H_PARAMETER && lpar_rc != H_CLOSED) + dev_err_ratelimited(dev, "rx: replenish packet buffer failed\n"); pool->free_map[pool->next_free] = index; pool->rx_buff[index].skb = NULL; @@ -1617,7 +1618,8 @@ static int ibmvnic_xmit(struct sk_buff *skb, struct net_device *netdev) &tx_crq); } if (lpar_rc != H_SUCCESS) { - dev_err(dev, "tx failed with code %ld\n", lpar_rc); + if (lpar_rc != H_CLOSED && lpar_rc != H_PARAMETER) + dev_err_ratelimited(dev, "tx: send failed\n"); dev_kfree_skb_any(skb); tx_buff->skb = NULL; @@ -3204,6 +3206,25 @@ static union ibmvnic_crq *ibmvnic_next_crq(struct ibmvnic_adapter *adapter) return crq; } +static void print_subcrq_error(struct device *dev, int rc, const char *func) +{ + switch (rc) { + case H_PARAMETER: + dev_warn_ratelimited(dev, + "%s failed: Send request is malformed or adapter failover pending. (rc=%d)\n", + func, rc); + break; + case H_CLOSED: + dev_warn_ratelimited(dev, + "%s failed: Backing queue closed. Adapter is down or failover pending. (rc=%d)\n", + func, rc); + break; + default: + dev_err_ratelimited(dev, "%s failed: (rc=%d)\n", func, rc); + break; + } +} + static int send_subcrq(struct ibmvnic_adapter *adapter, u64 remote_handle, union sub_crq *sub_crq) { @@ -3230,11 +3251,8 @@ static int send_subcrq(struct ibmvnic_adapter *adapter, u64 remote_handle, cpu_to_be64(u64_crq[2]), cpu_to_be64(u64_crq[3])); - if (rc) { - if (rc == H_CLOSED) - dev_warn(dev, "CRQ Queue closed\n"); - dev_err(dev, "Send error (rc=%d)\n", rc); - } + if (rc) + print_subcrq_error(dev, rc, __func__); return rc; } @@ -3252,11 +3270,8 @@ static int send_subcrq_indirect(struct ibmvnic_adapter *adapter, cpu_to_be64(remote_handle), ioba, num_entries); - if (rc) { - if (rc == H_CLOSED) - dev_warn(dev, "CRQ Queue closed\n"); - dev_err(dev, "Send (indirect) error (rc=%d)\n", rc); - } + if (rc) + print_subcrq_error(dev, rc, __func__); return rc; } -- cgit v1.2.3 From 916c5e1413be058d1c1f6e502db350df890730ce Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 13 Jul 2018 10:38:38 -0700 Subject: hv/netvsc: fix handling of fallback to single queue mode The netvsc device may need to fallback to running in single queue mode if host side only wants to support single queue. Recent change for handling mtu broke this in setup logic. Reported-by: Dan Carpenter Fixes: 3ffe64f1a641 ("hv_netvsc: split sub-channel setup into async and sync") Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/hyperv/rndis_filter.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/hyperv/rndis_filter.c b/drivers/net/hyperv/rndis_filter.c index 9b4e3c3787e5..408ece27131c 100644 --- a/drivers/net/hyperv/rndis_filter.c +++ b/drivers/net/hyperv/rndis_filter.c @@ -1338,6 +1338,7 @@ out: /* setting up multiple channels failed */ net_device->max_chn = 1; net_device->num_chn = 1; + return 0; err_dev_remv: rndis_filter_device_remove(dev, net_device); -- cgit v1.2.3 From c133459765fae249ba482f62e12f987aec4376f0 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 13 Jul 2018 21:25:19 -0700 Subject: net/ethernet/freescale/fman: fix cross-build error CC [M] drivers/net/ethernet/freescale/fman/fman.o In file included from ../drivers/net/ethernet/freescale/fman/fman.c:35: ../include/linux/fsl/guts.h: In function 'guts_set_dmacr': ../include/linux/fsl/guts.h:165:2: error: implicit declaration of function 'clrsetbits_be32' [-Werror=implicit-function-declaration] clrsetbits_be32(&guts->dmacr, 3 << shift, device << shift); ^~~~~~~~~~~~~~~ Signed-off-by: Randy Dunlap Cc: Madalin Bucur Cc: netdev@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: David S. Miller --- include/linux/fsl/guts.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/fsl/guts.h b/include/linux/fsl/guts.h index 3efa3b861d44..941b11811f85 100644 --- a/include/linux/fsl/guts.h +++ b/include/linux/fsl/guts.h @@ -16,6 +16,7 @@ #define __FSL_GUTS_H__ #include +#include /** * Global Utility Registers. -- cgit v1.2.3 From 432e629e56432064761be63bcd5e263c0920430d Mon Sep 17 00:00:00 2001 From: Saeed Mahameed Date: Sun, 15 Jul 2018 13:54:39 +0300 Subject: net/mlx4_en: Don't reuse RX page when XDP is set When a new rx packet arrives, the rx path will decide whether to reuse the remainder of the page or not according to one of the below conditions: 1. frag_info->frag_stride == PAGE_SIZE / 2 2. frags->page_offset + frag_info->frag_size > PAGE_SIZE; The first condition is no met for when XDP is set. For XDP, page_offset is always set to priv->rx_headroom which is XDP_PACKET_HEADROOM and frag_info->frag_size is around mtu size + some padding, still the 2nd release condition will hold since XDP_PACKET_HEADROOM + 1536 < PAGE_SIZE, as a result the page will not be released and will be _wrongly_ reused for next free rx descriptor. In XDP there is an assumption to have a page per packet and reuse can break such assumption and might cause packet data corruptions. Fix this by adding an extra condition (!priv->rx_headroom) to the 2nd case to avoid page reuse when XDP is set, since rx_headroom is set to 0 for non XDP setup and set to XDP_PACKET_HEADROOM for XDP setup. No additional cache line is required for the new condition. Fixes: 34db548bfb95 ("mlx4: add page recycling in receive path") Signed-off-by: Saeed Mahameed Signed-off-by: Tariq Toukan Suggested-by: Martin KaFai Lau CC: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_rx.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_rx.c b/drivers/net/ethernet/mellanox/mlx4/en_rx.c index 9f54ccbddea7..3360f7b9ee73 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_rx.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_rx.c @@ -474,10 +474,10 @@ static int mlx4_en_complete_rx_desc(struct mlx4_en_priv *priv, { const struct mlx4_en_frag_info *frag_info = priv->frag_info; unsigned int truesize = 0; + bool release = true; int nr, frag_size; struct page *page; dma_addr_t dma; - bool release; /* Collect used fragments while replacing them in the HW descriptors */ for (nr = 0;; frags++) { @@ -500,7 +500,11 @@ static int mlx4_en_complete_rx_desc(struct mlx4_en_priv *priv, release = page_count(page) != 1 || page_is_pfmemalloc(page) || page_to_nid(page) != numa_mem_id(); - } else { + } else if (!priv->rx_headroom) { + /* rx_headroom for non XDP setup is always 0. + * When XDP is set, the above condition will + * guarantee page is always released. + */ u32 sz_align = ALIGN(frag_size, SMP_CACHE_BYTES); frags->page_offset += sz_align; -- cgit v1.2.3 From 31048d7aedf31bf0f69c54a662944632f29d82f2 Mon Sep 17 00:00:00 2001 From: Stefan Baranoff Date: Sun, 15 Jul 2018 11:36:37 -0400 Subject: tcp: Fix broken repair socket window probe patch Correct previous bad attempt at allowing sockets to come out of TCP repair without sending window probes. To avoid changing size of the repair variable in struct tcp_sock, this lets the decision for sending probes or not to be made when coming out of repair by introducing two ways to turn it off. v2: * Remove erroneous comment; defines now make behavior clear Fixes: 70b7ff130224 ("tcp: allow user to create repair socket without window probes") Signed-off-by: Stefan Baranoff Signed-off-by: Eric Dumazet Acked-by: Andrei Vagin Signed-off-by: David S. Miller --- include/uapi/linux/tcp.h | 4 ++++ net/ipv4/tcp.c | 13 +++++++------ 2 files changed, 11 insertions(+), 6 deletions(-) diff --git a/include/uapi/linux/tcp.h b/include/uapi/linux/tcp.h index 29eb659aa77a..e3f6ed8a7064 100644 --- a/include/uapi/linux/tcp.h +++ b/include/uapi/linux/tcp.h @@ -127,6 +127,10 @@ enum { #define TCP_CM_INQ TCP_INQ +#define TCP_REPAIR_ON 1 +#define TCP_REPAIR_OFF 0 +#define TCP_REPAIR_OFF_NO_WP -1 /* Turn off without window probes */ + struct tcp_repair_opt { __u32 opt_code; __u32 opt_val; diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 8e5e2ca9ab1b..ec2186e3087f 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -2823,16 +2823,17 @@ static int do_tcp_setsockopt(struct sock *sk, int level, case TCP_REPAIR: if (!tcp_can_repair_sock(sk)) err = -EPERM; - /* 1 for normal repair, 2 for no window probes */ - else if (val == 1 || val == 2) { - tp->repair = val; + else if (val == TCP_REPAIR_ON) { + tp->repair = 1; sk->sk_reuse = SK_FORCE_REUSE; tp->repair_queue = TCP_NO_QUEUE; - } else if (val == 0) { + } else if (val == TCP_REPAIR_OFF) { + tp->repair = 0; + sk->sk_reuse = SK_NO_REUSE; + tcp_send_window_probe(sk); + } else if (val == TCP_REPAIR_OFF_NO_WP) { tp->repair = 0; sk->sk_reuse = SK_NO_REUSE; - if (tp->repair == 1) - tcp_send_window_probe(sk); } else err = -EINVAL; -- cgit v1.2.3 From b5d2d75e079a918be686957b1a8d2f6c5cc95a0a Mon Sep 17 00:00:00 2001 From: David Ahern Date: Sun, 15 Jul 2018 09:35:19 -0700 Subject: net/ipv6: Do not allow device only routes via the multipath API Eric reported that reverting the patch that fixed and simplified IPv6 multipath routes means reverting back to invalid userspace notifications. eg., $ ip -6 route add 2001:db8:1::/64 nexthop dev eth0 nexthop dev eth1 only generates a single notification: 2001:db8:1::/64 dev eth0 metric 1024 pref medium While working on a fix for this problem I found another case that is just broken completely - a multipath route with a gateway followed by device followed by gateway: $ ip -6 ro add 2001:db8:103::/64 nexthop via 2001:db8:1::64 nexthop dev dummy2 nexthop via 2001:db8:3::64 In this case the device only route is dropped completely - no notification to userpsace but no addition to the FIB either: $ ip -6 ro ls 2001:db8:1::/64 dev dummy1 proto kernel metric 256 pref medium 2001:db8:2::/64 dev dummy2 proto kernel metric 256 pref medium 2001:db8:3::/64 dev dummy3 proto kernel metric 256 pref medium 2001:db8:103::/64 metric 1024 nexthop via 2001:db8:1::64 dev dummy1 weight 1 nexthop via 2001:db8:3::64 dev dummy3 weight 1 pref medium fe80::/64 dev dummy1 proto kernel metric 256 pref medium fe80::/64 dev dummy2 proto kernel metric 256 pref medium fe80::/64 dev dummy3 proto kernel metric 256 pref medium Really, IPv6 multipath is just FUBAR'ed beyond repair when it comes to device only routes, so do not allow it all. This change will break any scripts relying on the mpath api for insert, but I don't see any other way to handle the permutations. Besides, since the routes are added to the FIB as standalone (non-multipath) routes the kernel is not doing what the user requested, so it might as well tell the user that. Reported-by: Eric Dumazet Signed-off-by: David Ahern Reviewed-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv6/route.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 63f99411f0de..2ce0bd17de4f 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -4388,6 +4388,13 @@ static int ip6_route_multipath_add(struct fib6_config *cfg, rt = NULL; goto cleanup; } + if (!rt6_qualify_for_ecmp(rt)) { + err = -EINVAL; + NL_SET_ERR_MSG(extack, + "Device only routes can not be added for IPv6 using the multipath API."); + fib6_info_release(rt); + goto cleanup; + } rt->fib6_nh.nh_weight = rtnh->rtnh_hops + 1; -- cgit v1.2.3 From dea39aca1d7aef1e2b95b07edeacf04cc8863a2e Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Sun, 15 Jul 2018 21:53:20 +0200 Subject: net: lan78xx: Fix race in tx pending skb size calculation The skb size calculation in lan78xx_tx_bh is in race with the start_xmit, which could lead to rare kernel oopses. So protect the whole skb walk with a spin lock. As a benefit we can unlink the skb directly. This patch was tested on Raspberry Pi 3B+ Link: https://github.com/raspberrypi/linux/issues/2608 Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet") Cc: stable Signed-off-by: Floris Bos Signed-off-by: Stefan Wahren Signed-off-by: David S. Miller --- drivers/net/usb/lan78xx.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c index 2e4130746c40..ed10d49eb5e0 100644 --- a/drivers/net/usb/lan78xx.c +++ b/drivers/net/usb/lan78xx.c @@ -3344,6 +3344,7 @@ static void lan78xx_tx_bh(struct lan78xx_net *dev) pkt_cnt = 0; count = 0; length = 0; + spin_lock_irqsave(&tqp->lock, flags); for (skb = tqp->next; pkt_cnt < tqp->qlen; skb = skb->next) { if (skb_is_gso(skb)) { if (pkt_cnt) { @@ -3352,7 +3353,8 @@ static void lan78xx_tx_bh(struct lan78xx_net *dev) } count = 1; length = skb->len - TX_OVERHEAD; - skb2 = skb_dequeue(tqp); + __skb_unlink(skb, tqp); + spin_unlock_irqrestore(&tqp->lock, flags); goto gso_skb; } @@ -3361,6 +3363,7 @@ static void lan78xx_tx_bh(struct lan78xx_net *dev) skb_totallen = skb->len + roundup(skb_totallen, sizeof(u32)); pkt_cnt++; } + spin_unlock_irqrestore(&tqp->lock, flags); /* copy to a single skb */ skb = alloc_skb(skb_totallen, GFP_ATOMIC); -- cgit v1.2.3 From 3578a7ecb69920efc3885dbd610e98c00dbdf5db Mon Sep 17 00:00:00 2001 From: John Allen Date: Mon, 16 Jul 2018 10:29:30 -0500 Subject: ibmvnic: Fix error recovery on login failure Testing has uncovered a failure case that is not handled properly. In the event that a login fails and we are not able to recover on the spot, we return 0 from do_reset, preventing any error recovery code from being triggered. Additionally, the state is set to "probed" meaning that when we are able to trigger the error recovery, the driver always comes up in the probed state. To handle the case properly, we need to return a failure code here and set the adapter state to the state that we entered the reset in indicating the state that we would like to come out of the recovery reset in. Signed-off-by: John Allen Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ibmvnic.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index c50963680f30..ffe7acbeaa22 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -1827,8 +1827,8 @@ static int do_reset(struct ibmvnic_adapter *adapter, rc = ibmvnic_login(netdev); if (rc) { - adapter->state = VNIC_PROBED; - return 0; + adapter->state = reset_state; + return rc; } if (adapter->reset_reason == VNIC_RESET_CHANGE_PARAM || -- cgit v1.2.3 From 0f2605fbafb0c0c05d0d4655114530de972ee8ad Mon Sep 17 00:00:00 2001 From: Siva Reddy Kallam Date: Mon, 16 Jul 2018 11:13:31 +0530 Subject: tg3: Update copyright Signed-off-by: Siva Reddy Kallam Reviewed-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 4 ++++ drivers/net/ethernet/broadcom/tg3.h | 2 ++ 2 files changed, 6 insertions(+) diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 3be87efdc93d..2ee15273ae29 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -6,11 +6,15 @@ * Copyright (C) 2004 Sun Microsystems Inc. * Copyright (C) 2005-2016 Broadcom Corporation. * Copyright (C) 2016-2017 Broadcom Limited. + * Copyright (C) 2018 Broadcom. All Rights Reserved. The term "Broadcom" + * refers to Broadcom Inc. and/or its subsidiaries. * * Firmware is: * Derived from proprietary unpublished source code, * Copyright (C) 2000-2016 Broadcom Corporation. * Copyright (C) 2016-2017 Broadcom Ltd. + * Copyright (C) 2018 Broadcom. All Rights Reserved. The term "Broadcom" + * refers to Broadcom Inc. and/or its subsidiaries. * * Permission is hereby granted for the distribution of this firmware * data in hexadecimal or equivalent format, provided this copyright diff --git a/drivers/net/ethernet/broadcom/tg3.h b/drivers/net/ethernet/broadcom/tg3.h index 1d61aa3efda1..a772a33b685c 100644 --- a/drivers/net/ethernet/broadcom/tg3.h +++ b/drivers/net/ethernet/broadcom/tg3.h @@ -7,6 +7,8 @@ * Copyright (C) 2004 Sun Microsystems Inc. * Copyright (C) 2007-2016 Broadcom Corporation. * Copyright (C) 2016-2017 Broadcom Limited. + * Copyright (C) 2018 Broadcom. All Rights Reserved. The term "Broadcom" + * refers to Broadcom Inc. and/or its subsidiaries. */ #ifndef _T3_H -- cgit v1.2.3 From 3a498606bb04af603a46ebde8296040b2de350d1 Mon Sep 17 00:00:00 2001 From: Sanjeev Bansal Date: Mon, 16 Jul 2018 11:13:32 +0530 Subject: tg3: Add higher cpu clock for 5762. This patch has fix for TX timeout while running bi-directional traffic with 100 Mbps using 5762. Signed-off-by: Sanjeev Bansal Signed-off-by: Siva Reddy Kallam Reviewed-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 2ee15273ae29..aa1374d0af93 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -9294,6 +9294,15 @@ static int tg3_chip_reset(struct tg3 *tp) tg3_restore_clk(tp); + /* Increase the core clock speed to fix tx timeout issue for 5762 + * with 100Mbps link speed. + */ + if (tg3_asic_rev(tp) == ASIC_REV_5762) { + val = tr32(TG3_CPMU_CLCK_ORIDE_ENABLE); + tw32(TG3_CPMU_CLCK_ORIDE_ENABLE, val | + TG3_CPMU_MAC_ORIDE_ENABLE); + } + /* Reprobe ASF enable state. */ tg3_flag_clear(tp, ENABLE_ASF); tp->phy_flags &= ~(TG3_PHYFLG_1G_ON_VAUX_OK | -- cgit v1.2.3 From 1992d99882afda6dc17f9d49c06150856a91282f Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Mon, 16 Jul 2018 13:56:52 +0200 Subject: net/smc: take sock lock in smc_ioctl() SMC ioctl processing requires the sock lock to work properly in all thinkable scenarios. Problem has been found with RaceFuzzer and fixes: KASAN: null-ptr-deref Read in smc_ioctl Reported-by: Byoungyoung Lee Reported-by: syzbot+35b2c5aa76fd398b9fd4@syzkaller.appspotmail.com Signed-off-by: Ursula Braun Reviewed-by: Stefano Brivio Signed-off-by: David S. Miller --- net/smc/af_smc.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-) diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c index 5334157f5065..c12a7fc18f56 100644 --- a/net/smc/af_smc.c +++ b/net/smc/af_smc.c @@ -1524,10 +1524,13 @@ static int smc_ioctl(struct socket *sock, unsigned int cmd, return -EBADF; return smc->clcsock->ops->ioctl(smc->clcsock, cmd, arg); } + lock_sock(&smc->sk); switch (cmd) { case SIOCINQ: /* same as FIONREAD */ - if (smc->sk.sk_state == SMC_LISTEN) + if (smc->sk.sk_state == SMC_LISTEN) { + release_sock(&smc->sk); return -EINVAL; + } if (smc->sk.sk_state == SMC_INIT || smc->sk.sk_state == SMC_CLOSED) answ = 0; @@ -1536,8 +1539,10 @@ static int smc_ioctl(struct socket *sock, unsigned int cmd, break; case SIOCOUTQ: /* output queue size (not send + not acked) */ - if (smc->sk.sk_state == SMC_LISTEN) + if (smc->sk.sk_state == SMC_LISTEN) { + release_sock(&smc->sk); return -EINVAL; + } if (smc->sk.sk_state == SMC_INIT || smc->sk.sk_state == SMC_CLOSED) answ = 0; @@ -1547,8 +1552,10 @@ static int smc_ioctl(struct socket *sock, unsigned int cmd, break; case SIOCOUTQNSD: /* output queue size (not send only) */ - if (smc->sk.sk_state == SMC_LISTEN) + if (smc->sk.sk_state == SMC_LISTEN) { + release_sock(&smc->sk); return -EINVAL; + } if (smc->sk.sk_state == SMC_INIT || smc->sk.sk_state == SMC_CLOSED) answ = 0; @@ -1556,8 +1563,10 @@ static int smc_ioctl(struct socket *sock, unsigned int cmd, answ = smc_tx_prepared_sends(&smc->conn); break; case SIOCATMARK: - if (smc->sk.sk_state == SMC_LISTEN) + if (smc->sk.sk_state == SMC_LISTEN) { + release_sock(&smc->sk); return -EINVAL; + } if (smc->sk.sk_state == SMC_INIT || smc->sk.sk_state == SMC_CLOSED) { answ = 0; @@ -1573,8 +1582,10 @@ static int smc_ioctl(struct socket *sock, unsigned int cmd, } break; default: + release_sock(&smc->sk); return -ENOIOCTLCMD; } + release_sock(&smc->sk); return put_user(answ, (int __user *)arg); } -- cgit v1.2.3 From d3f6daede246038cf2ea38b78d732f9dd8feb1d6 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Mon, 16 Jul 2018 09:10:48 +0200 Subject: ARM: dts: omap4-droid4: fix dts w.r.t. pwm pwm node should not be under gpio6 node in the device tree. This fixes detection of the pwm on Droid 4. Fixes: 6d7bdd328da4 ("ARM: dts: omap4-droid4: update touchscreen") Signed-off-by: Pavel Machek Reviewed-by: Sebastian Reichel [tony@atomide.com: added fixes tag] Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap4-droid4-xt894.dts | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts index bdf73cbcec3a..e7c3c563ff8f 100644 --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts @@ -159,13 +159,7 @@ dais = <&mcbsp2_port>, <&mcbsp3_port>; }; -}; - -&dss { - status = "okay"; -}; -&gpio6 { pwm8: dmtimer-pwm-8 { pinctrl-names = "default"; pinctrl-0 = <&vibrator_direction_pin>; @@ -192,7 +186,10 @@ pwm-names = "enable", "direction"; direction-duty-cycle-ns = <10000000>; }; +}; +&dss { + status = "okay"; }; &dsi1 { -- cgit v1.2.3 From 9196b55e1270da125d5f126c1b91f1843e552f17 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 28 Jun 2018 09:01:54 +1000 Subject: usb: gadget: aspeed-vhub: Fix SETUP packets with OUT data phase A couple of bugs in the driver are preventing SETUP packets with an OUT data phase from working properly. Interestingly those are incredibly rare (RNDIS typically uses them and thus is broken without this fix). The main problem was an incorrect register offset being applied for arming RX on EP0. The other problem relates to stalling such a packet before the data phase, in which case we don't get an ACK cycle, and get the next SETUP packet directly, so we shouldn't reject it. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Felipe Balbi --- drivers/usb/gadget/udc/aspeed-vhub/ep0.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/usb/gadget/udc/aspeed-vhub/ep0.c b/drivers/usb/gadget/udc/aspeed-vhub/ep0.c index 20ffb03ff6ac..44f2b3b53b2f 100644 --- a/drivers/usb/gadget/udc/aspeed-vhub/ep0.c +++ b/drivers/usb/gadget/udc/aspeed-vhub/ep0.c @@ -108,6 +108,13 @@ void ast_vhub_ep0_handle_setup(struct ast_vhub_ep *ep) /* Check our state, cancel pending requests if needed */ if (ep->ep0.state != ep0_state_token) { EPDBG(ep, "wrong state\n"); + ast_vhub_nuke(ep, -EIO); + + /* + * Accept the packet regardless, this seems to happen + * when stalling a SETUP packet that has an OUT data + * phase. + */ ast_vhub_nuke(ep, 0); goto stall; } @@ -224,7 +231,7 @@ static void ast_vhub_ep0_rx_prime(struct ast_vhub_ep *ep) EPVDBG(ep, "rx prime\n"); /* Prime endpoint for receiving data */ - writel(VHUB_EP0_RX_BUFF_RDY, ep->ep0.ctlstat + AST_VHUB_EP0_CTRL); + writel(VHUB_EP0_RX_BUFF_RDY, ep->ep0.ctlstat); } static void ast_vhub_ep0_do_receive(struct ast_vhub_ep *ep, struct ast_vhub_req *req, -- cgit v1.2.3 From 50b9773c13bffbef32060e67c4483ea7b2eca7b5 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 27 Jun 2018 12:33:56 +1000 Subject: usb: gadget: Fix OS descriptors support The current code is broken as it re-defines "req" inside the if block, then goto out of it. Thus the request that ends up being sent is not the one that was populated by the code in question. This fixes RNDIS driver autodetect by Windows 10 for me. The bug was introduced by Chris rework to remove the local queuing inside the if { } block of the redefined request. Fixes: 636ba13aec8a ("usb: gadget: composite: remove duplicated code in OS desc handling") Cc: # v4.17 Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Felipe Balbi --- drivers/usb/gadget/composite.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index d2fa071c21b1..b8a15840b4ff 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -1819,7 +1819,6 @@ unknown: if (cdev->use_os_string && cdev->os_desc_config && (ctrl->bRequestType & USB_TYPE_VENDOR) && ctrl->bRequest == cdev->b_vendor_code) { - struct usb_request *req; struct usb_configuration *os_desc_cfg; u8 *buf; int interface; -- cgit v1.2.3 From 0602088b10a7c0b4e044a810678ef93d7cc5bf48 Mon Sep 17 00:00:00 2001 From: Jia-Ju Bai Date: Wed, 20 Jun 2018 11:54:53 +0800 Subject: usb: gadget: r8a66597: Fix two possible sleep-in-atomic-context bugs in init_controller() The driver may sleep with holding a spinlock. The function call paths (from bottom to top) in Linux-4.16.7 are: [FUNC] msleep drivers/usb/gadget/udc/r8a66597-udc.c, 839: msleep in init_controller drivers/usb/gadget/udc/r8a66597-udc.c, 96: init_controller in r8a66597_usb_disconnect drivers/usb/gadget/udc/r8a66597-udc.c, 93: spin_lock in r8a66597_usb_disconnect [FUNC] msleep drivers/usb/gadget/udc/r8a66597-udc.c, 835: msleep in init_controller drivers/usb/gadget/udc/r8a66597-udc.c, 96: init_controller in r8a66597_usb_disconnect drivers/usb/gadget/udc/r8a66597-udc.c, 93: spin_lock in r8a66597_usb_disconnect To fix these bugs, msleep() is replaced with mdelay(). This bug is found by my static analysis tool (DSAC-2) and checked by my code review. Signed-off-by: Jia-Ju Bai Signed-off-by: Felipe Balbi --- drivers/usb/gadget/udc/r8a66597-udc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/gadget/udc/r8a66597-udc.c b/drivers/usb/gadget/udc/r8a66597-udc.c index a3ecce62662b..24ee9867964b 100644 --- a/drivers/usb/gadget/udc/r8a66597-udc.c +++ b/drivers/usb/gadget/udc/r8a66597-udc.c @@ -832,11 +832,11 @@ static void init_controller(struct r8a66597 *r8a66597) r8a66597_bset(r8a66597, XCKE, SYSCFG0); - msleep(3); + mdelay(3); r8a66597_bset(r8a66597, PLLC, SYSCFG0); - msleep(1); + mdelay(1); r8a66597_bset(r8a66597, SCKE, SYSCFG0); -- cgit v1.2.3 From f36b507c14c4b6e634463a610294e9cb0065c8ea Mon Sep 17 00:00:00 2001 From: Jia-Ju Bai Date: Wed, 20 Jun 2018 11:55:08 +0800 Subject: usb: gadget: r8a66597: Fix a possible sleep-in-atomic-context bugs in r8a66597_queue() The driver may sleep in an interrupt handler. The function call path (from bottom to top) in Linux-4.16.7 is: [FUNC] r8a66597_queue(GFP_KERNEL) drivers/usb/gadget/udc/r8a66597-udc.c, 1193: r8a66597_queue in get_status drivers/usb/gadget/udc/r8a66597-udc.c, 1301: get_status in setup_packet drivers/usb/gadget/udc/r8a66597-udc.c, 1381: setup_packet in irq_control_stage drivers/usb/gadget/udc/r8a66597-udc.c, 1508: irq_control_stage in r8a66597_irq (interrupt handler) To fix this bug, GFP_KERNEL is replaced with GFP_ATOMIC. This bug is found by my static analysis tool (DSAC-2) and checked by my code review. Signed-off-by: Jia-Ju Bai Signed-off-by: Felipe Balbi --- drivers/usb/gadget/udc/r8a66597-udc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/udc/r8a66597-udc.c b/drivers/usb/gadget/udc/r8a66597-udc.c index 24ee9867964b..11e25a3f4f1f 100644 --- a/drivers/usb/gadget/udc/r8a66597-udc.c +++ b/drivers/usb/gadget/udc/r8a66597-udc.c @@ -1190,7 +1190,7 @@ __acquires(r8a66597->lock) r8a66597->ep0_req->length = 2; /* AV: what happens if we get called again before that gets through? */ spin_unlock(&r8a66597->lock); - r8a66597_queue(r8a66597->gadget.ep0, r8a66597->ep0_req, GFP_KERNEL); + r8a66597_queue(r8a66597->gadget.ep0, r8a66597->ep0_req, GFP_ATOMIC); spin_lock(&r8a66597->lock); } -- cgit v1.2.3 From e87581fe0509020f77ebf0b7c4c1c338c6a4bcf6 Mon Sep 17 00:00:00 2001 From: Eugeniu Rosca Date: Thu, 21 Jun 2018 17:22:46 +0200 Subject: usb: gadget: f_uac2: fix error handling in afunc_bind (again) If usb_ep_autoconfig() fails (i.e. returns a null endpoint descriptor), we expect afunc_bind() to fail (i.e. return a negative error code). However, due to v4.10-rc1 commit f1d3861d63a5 ("usb: gadget: f_uac2: fix error handling at afunc_bind"), afunc_bind() returns zero, telling the caller that it succeeded. This then generates NULL pointer dereference in below scenario on Rcar H3-ES20-Salvator-X target: rcar-gen3:/home/root# modprobe g_audio [ 626.521155] g_audio gadget: afunc_bind:565 Error! [ 626.526319] g_audio gadget: Linux USB Audio Gadget, version: Feb 2, 2012 [ 626.533405] g_audio gadget: g_audio ready rcar-gen3:/home/root# rcar-gen3:/home/root# modprobe -r g_audio [ 728.256707] ================================================================== [ 728.264293] BUG: KASAN: null-ptr-deref in u_audio_stop_capture+0x70/0x268 [u_audio] [ 728.272244] Read of size 8 at addr 00000000000000a0 by task modprobe/2545 [ 728.279309] [ 728.280849] CPU: 0 PID: 2545 Comm: modprobe Tainted: G WC 4.14.47+ #152 [ 728.288778] Hardware name: Renesas Salvator-X board based on r8a7795 ES2.0+ (DT) [ 728.296454] Call trace: [ 728.299151] [] dump_backtrace+0x0/0x364 [ 728.304808] [] show_stack+0x14/0x1c [ 728.310081] [] dump_stack+0x108/0x174 [ 728.315522] [] kasan_report+0x1fc/0x354 [ 728.321134] [] __asan_load8+0x24/0x94 [ 728.326600] [] u_audio_stop_capture+0x70/0x268 [u_audio] [ 728.333735] [] afunc_disable+0x44/0x60 [usb_f_uac2] [ 728.340503] [] usb_remove_function+0x9c/0x210 [libcomposite] [ 728.348060] [] remove_config.isra.2+0x1d8/0x218 [libcomposite] [ 728.355788] [] __composite_unbind+0x104/0x1f8 [libcomposite] [ 728.363339] [] composite_unbind+0x10/0x18 [libcomposite] [ 728.370536] [] usb_gadget_remove_driver+0xc0/0x170 [udc_core] [ 728.378172] [] usb_gadget_unregister_driver+0x1cc/0x258 [udc_core] [ 728.386274] [] usb_composite_unregister+0x10/0x18 [libcomposite] [ 728.394116] [] audio_driver_exit+0x14/0x28 [g_audio] [ 728.400878] [] SyS_delete_module+0x288/0x32c [ 728.406935] Exception stack(0xffff8006cf6c7ec0 to 0xffff8006cf6c8000) [ 728.413624] 7ec0: 0000000006136428 0000000000000800 0000000000000000 0000ffffd706efe8 [ 728.421718] 7ee0: 0000ffffd706efe9 000000000000000a 1999999999999999 0000000000000000 [ 728.429792] 7f00: 000000000000006a 000000000042c078 0000000000000000 0000000000000005 [ 728.437870] 7f20: 0000000000000000 0000000000000000 0000000000000004 0000000000000000 [ 728.445952] 7f40: 000000000042bfc8 0000ffffbc7c8f40 0000000000000000 00000000061363c0 [ 728.454035] 7f60: 0000000006136428 0000000000000000 0000000000000000 0000000006136428 [ 728.462114] 7f80: 000000000042c000 0000ffffd7071448 000000000042c000 0000000000000000 [ 728.470190] 7fa0: 00000000061350c0 0000ffffd7070010 000000000041129c 0000ffffd7070010 [ 728.478281] 7fc0: 0000ffffbc7c8f48 0000000060000000 0000000006136428 000000000000006a [ 728.486351] 7fe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 728.494434] [] el0_svc_naked+0x34/0x38 [ 728.499957] ================================================================== [ 728.507801] Unable to handle kernel NULL pointer dereference at virtual address 000000a0 [ 728.517742] Mem abort info: [ 728.520993] Exception class = DABT (current EL), IL = 32 bits [ 728.527375] SET = 0, FnV = 0 [ 728.530731] EA = 0, S1PTW = 0 [ 728.534361] Data abort info: [ 728.537650] ISV = 0, ISS = 0x00000006 [ 728.541863] CM = 0, WnR = 0 [ 728.545167] user pgtable: 4k pages, 48-bit VAs, pgd = ffff8006c6100000 [ 728.552156] [00000000000000a0] *pgd=0000000716a8d003 [ 728.557519] , *pud=00000007116fc003 [ 728.561259] , *pmd=0000000000000000 [ 728.564985] Internal error: Oops: 96000006 [#1] PREEMPT SMP [ 728.570815] Modules linked in: [ 728.574023] usb_f_uac2 [ 728.576560] u_audio [ 728.578827] g_audio(-) [ 728.581361] libcomposite [ 728.584071] configfs [ 728.586428] aes_ce_blk [ 728.588960] sata_rcar [ 728.591421] crypto_simd [ 728.594039] cryptd [ 728.596217] libata [ 728.598396] aes_ce_cipher [ 728.601188] crc32_ce [ 728.603542] ghash_ce [ 728.605896] gf128mul [ 728.608250] aes_arm64 [ 728.610692] scsi_mod [ 728.613046] sha2_ce [ 728.615313] xhci_plat_hcd [ 728.618106] sha256_arm64 [ 728.620811] sha1_ce [ 728.623077] renesas_usbhs [ 728.625869] xhci_hcd [ 728.628243] renesas_usb3 [ 728.630948] sha1_generic [ 728.633670] ravb_streaming(C) [ 728.636814] udc_core [ 728.639168] cpufreq_dt [ 728.641697] rcar_gen3_thermal [ 728.644840] usb_dmac [ 728.647194] pwm_rcar [ 728.649548] thermal_sys [ 728.652165] virt_dma [ 728.654519] mch_core(C) [ 728.657137] pwm_bl [ 728.659315] snd_soc_rcar [ 728.662020] snd_aloop [ 728.664462] snd_soc_generic_card [ 728.667869] snd_soc_ak4613 [ 728.670749] ipv6 [ 728.672768] autofs4 [ 728.675052] CPU: 0 PID: 2545 Comm: modprobe Tainted: G B WC 4.14.47+ #152 [ 728.682973] Hardware name: Renesas Salvator-X board based on r8a7795 ES2.0+ (DT) [ 728.690637] task: ffff8006ced38000 task.stack: ffff8006cf6c0000 [ 728.696814] PC is at u_audio_stop_capture+0x70/0x268 [u_audio] [ 728.702896] LR is at u_audio_stop_capture+0x70/0x268 [u_audio] [ 728.708964] pc : [] lr : [] pstate: 60000145 [ 728.716620] sp : ffff8006cf6c7a50 [ 728.720154] x29: ffff8006cf6c7a50 [ 728.723760] x28: ffff8006ced38000 [ 728.727272] x27: ffff200008fd7000 [ 728.730857] x26: ffff2000021d2340 [ 728.734361] x25: 0000000000000000 [ 728.737948] x24: ffff200009e94b08 [ 728.741452] x23: 00000000000000a0 [ 728.745052] x22: 00000000000000a8 [ 728.748558] x21: 1ffff000d9ed8f7c [ 728.752142] x20: ffff8006d671a800 [ 728.755646] x19: 0000000000000000 [ 728.759231] x18: 0000000000000000 [ 728.762736] x17: 0000ffffbc7c8f40 [ 728.766320] x16: ffff200008213c4c [ 728.769823] x15: 0000000000000000 [ 728.773408] x14: 0720072007200720 [ 728.776912] x13: 0720072007200720 [ 728.780497] x12: ffffffffffffffff [ 728.784001] x11: 0000000000000040 [ 728.787598] x10: 0000000000001600 [ 728.791103] x9 : ffff8006cf6c77a0 [ 728.794689] x8 : ffff8006ced39660 [ 728.798193] x7 : ffff20000811c738 [ 728.801794] x6 : 0000000000000000 [ 728.805299] x5 : dfff200000000000 [ 728.808885] x4 : ffff8006ced38000 [ 728.812390] x3 : ffff200008fb46e8 [ 728.815976] x2 : 0000000000000007 [ 728.819480] x1 : 3ba68643e7431500 [ 728.823066] x0 : 0000000000000000 [ 728.826574] Process modprobe (pid: 2545, stack limit = 0xffff8006cf6c0000) [ 728.833704] Call trace: [ 728.836292] Exception stack(0xffff8006cf6c7910 to 0xffff8006cf6c7a50) [ 728.842987] 7900: 0000000000000000 3ba68643e7431500 [ 728.851084] 7920: 0000000000000007 ffff200008fb46e8 ffff8006ced38000 dfff200000000000 [ 728.859173] 7940: 0000000000000000 ffff20000811c738 ffff8006ced39660 ffff8006cf6c77a0 [ 728.867248] 7960: 0000000000001600 0000000000000040 ffffffffffffffff 0720072007200720 [ 728.875323] 7980: 0720072007200720 0000000000000000 ffff200008213c4c 0000ffffbc7c8f40 [ 728.883412] 79a0: 0000000000000000 0000000000000000 ffff8006d671a800 1ffff000d9ed8f7c [ 728.891485] 79c0: 00000000000000a8 00000000000000a0 ffff200009e94b08 0000000000000000 [ 728.899561] 79e0: ffff2000021d2340 ffff200008fd7000 ffff8006ced38000 ffff8006cf6c7a50 [ 728.907636] 7a00: ffff2000021e1618 ffff8006cf6c7a50 ffff2000021e1618 0000000060000145 [ 728.915710] 7a20: 0000000000000008 0000000000000000 0000ffffffffffff 3ba68643e7431500 [ 728.923780] 7a40: ffff8006cf6c7a50 ffff2000021e1618 [ 728.928880] [] u_audio_stop_capture+0x70/0x268 [u_audio] [ 728.936032] [] afunc_disable+0x44/0x60 [usb_f_uac2] [ 728.942822] [] usb_remove_function+0x9c/0x210 [libcomposite] [ 728.950385] [] remove_config.isra.2+0x1d8/0x218 [libcomposite] [ 728.958134] [] __composite_unbind+0x104/0x1f8 [libcomposite] [ 728.965689] [] composite_unbind+0x10/0x18 [libcomposite] [ 728.972882] [] usb_gadget_remove_driver+0xc0/0x170 [udc_core] [ 728.980522] [] usb_gadget_unregister_driver+0x1cc/0x258 [udc_core] [ 728.988638] [] usb_composite_unregister+0x10/0x18 [libcomposite] [ 728.996472] [] audio_driver_exit+0x14/0x28 [g_audio] [ 729.003231] [] SyS_delete_module+0x288/0x32c [ 729.009278] Exception stack(0xffff8006cf6c7ec0 to 0xffff8006cf6c8000) [ 729.015946] 7ec0: 0000000006136428 0000000000000800 0000000000000000 0000ffffd706efe8 [ 729.024022] 7ee0: 0000ffffd706efe9 000000000000000a 1999999999999999 0000000000000000 [ 729.032099] 7f00: 000000000000006a 000000000042c078 0000000000000000 0000000000000005 [ 729.040172] 7f20: 0000000000000000 0000000000000000 0000000000000004 0000000000000000 [ 729.048263] 7f40: 000000000042bfc8 0000ffffbc7c8f40 0000000000000000 00000000061363c0 [ 729.056337] 7f60: 0000000006136428 0000000000000000 0000000000000000 0000000006136428 [ 729.064411] 7f80: 000000000042c000 0000ffffd7071448 000000000042c000 0000000000000000 [ 729.072484] 7fa0: 00000000061350c0 0000ffffd7070010 000000000041129c 0000ffffd7070010 [ 729.080563] 7fc0: 0000ffffbc7c8f48 0000000060000000 0000000006136428 000000000000006a [ 729.088636] 7fe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 729.096733] [] el0_svc_naked+0x34/0x38 [ 729.102259] Code: 9597d1b3 aa1703e0 9102a276 958792b9 (f9405275) [ 729.108617] ---[ end trace 7560c5fa3d100243 ]--- After this patch is applied, the issue is fixed: rcar-gen3:/home/root# modprobe g_audio [ 59.217127] g_audio gadget: afunc_bind:565 Error! [ 59.222329] g_audio ee020000.usb: failed to start g_audio: -19 modprobe: ERROR: could not insert 'g_audio': No such device rcar-gen3:/home/root# modprobe -r g_audio rcar-gen3:/home/root# Fixes: f1d3861d63a5 ("usb: gadget: f_uac2: fix error handling at afunc_bind") Signed-off-by: Eugeniu Rosca Signed-off-by: Felipe Balbi --- drivers/usb/gadget/function/f_uac2.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/gadget/function/f_uac2.c b/drivers/usb/gadget/function/f_uac2.c index d2dc1f00180b..6954db22c2f3 100644 --- a/drivers/usb/gadget/function/f_uac2.c +++ b/drivers/usb/gadget/function/f_uac2.c @@ -559,13 +559,13 @@ afunc_bind(struct usb_configuration *cfg, struct usb_function *fn) agdev->out_ep = usb_ep_autoconfig(gadget, &fs_epout_desc); if (!agdev->out_ep) { dev_err(dev, "%s:%d Error!\n", __func__, __LINE__); - return ret; + return -ENODEV; } agdev->in_ep = usb_ep_autoconfig(gadget, &fs_epin_desc); if (!agdev->in_ep) { dev_err(dev, "%s:%d Error!\n", __func__, __LINE__); - return ret; + return -ENODEV; } agdev->in_ep_maxpsize = max_t(u16, -- cgit v1.2.3 From dfa042fa310caa475667b8c38d852f14439e0b01 Mon Sep 17 00:00:00 2001 From: Eugeniu Rosca Date: Thu, 21 Jun 2018 17:22:47 +0200 Subject: usb: gadget: u_audio: fix pcm/card naming in g_audio_setup() Fix below smatch (v0.5.0-4443-g69e9094e11c1) warnings: drivers/usb/gadget/function/u_audio.c:607 g_audio_setup() warn: strcpy() 'pcm_name' of unknown size might be too large for 'pcm->name' drivers/usb/gadget/function/u_audio.c:614 g_audio_setup() warn: strcpy() 'card_name' of unknown size might be too large for 'card->driver' drivers/usb/gadget/function/u_audio.c:615 g_audio_setup() warn: strcpy() 'card_name' of unknown size might be too large for 'card->shortname' Below commits performed a similar 's/strcpy/strlcpy/' rework: * v2.6.31 commit 8372d4980fbc ("ALSA: ctxfi - Fix PCM device naming") * v4.14 commit 003d3e70dbeb ("ALSA: ad1848: fix format string overflow warning") * v4.14 commit 6d8b04de87e1 ("ALSA: cs423x: fix format string overflow warning") Fixes: eb9fecb9e69b ("usb: gadget: f_uac2: split out audio core") Signed-off-by: Eugeniu Rosca Signed-off-by: Felipe Balbi --- drivers/usb/gadget/function/u_audio.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/usb/gadget/function/u_audio.c b/drivers/usb/gadget/function/u_audio.c index a72295c953bb..c0a65e110fc9 100644 --- a/drivers/usb/gadget/function/u_audio.c +++ b/drivers/usb/gadget/function/u_audio.c @@ -595,15 +595,15 @@ int g_audio_setup(struct g_audio *g_audio, const char *pcm_name, if (err < 0) goto snd_fail; - strcpy(pcm->name, pcm_name); + strlcpy(pcm->name, pcm_name, sizeof(pcm->name)); pcm->private_data = uac; uac->pcm = pcm; snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &uac_pcm_ops); snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &uac_pcm_ops); - strcpy(card->driver, card_name); - strcpy(card->shortname, card_name); + strlcpy(card->driver, card_name, sizeof(card->driver)); + strlcpy(card->shortname, card_name, sizeof(card->shortname)); sprintf(card->longname, "%s %i", card_name, card->dev->id); snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_CONTINUOUS, -- cgit v1.2.3 From 6b37bd78d30c890e575a1bda22978d1d2a233362 Mon Sep 17 00:00:00 2001 From: Joshua Frkuska Date: Thu, 21 Jun 2018 17:22:48 +0200 Subject: usb: gadget: u_audio: update hw_ptr in iso_complete after data copied In u_audio_iso_complete, the runtime hw_ptr is updated before the data is actually copied over to/from the buffer/dma area. When ALSA uses this hw_ptr, the data may not actually be available to be used. This causes trash/stale audio to play/record. This patch updates the hw_ptr after the data has been copied to avoid this. Fixes: 132fcb460839 ("usb: gadget: Add Audio Class 2.0 Driver") Signed-off-by: Joshua Frkuska Signed-off-by: Eugeniu Rosca Signed-off-by: Felipe Balbi --- drivers/usb/gadget/function/u_audio.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/usb/gadget/function/u_audio.c b/drivers/usb/gadget/function/u_audio.c index c0a65e110fc9..4c6df7130891 100644 --- a/drivers/usb/gadget/function/u_audio.c +++ b/drivers/usb/gadget/function/u_audio.c @@ -143,7 +143,6 @@ static void u_audio_iso_complete(struct usb_ep *ep, struct usb_request *req) update_alsa = true; hw_ptr = prm->hw_ptr; - prm->hw_ptr = (prm->hw_ptr + req->actual) % prm->dma_bytes; spin_unlock_irqrestore(&prm->lock, flags); @@ -168,6 +167,11 @@ static void u_audio_iso_complete(struct usb_ep *ep, struct usb_request *req) } } + spin_lock_irqsave(&prm->lock, flags); + /* update hw_ptr after data is copied to memory */ + prm->hw_ptr = (hw_ptr + req->actual) % prm->dma_bytes; + spin_unlock_irqrestore(&prm->lock, flags); + exit: if (usb_ep_queue(ep, req, GFP_ATOMIC)) dev_err(uac->card->dev, "%d Error!\n", __LINE__); -- cgit v1.2.3 From 96afb54ece0ee903d23a7ac04ddc461413b972c4 Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Thu, 21 Jun 2018 17:22:49 +0200 Subject: usb: gadget: u_audio: remove caching of stream buffer parameters There is no necessity to copy PCM stream ring buffer area and size properties to UAC private data structure, these values can be got from substream itself. The change gives more control on substream and avoid stale caching. Fixes: 132fcb460839 ("usb: gadget: Add Audio Class 2.0 Driver") Signed-off-by: Vladimir Zapolskiy Signed-off-by: Eugeniu Rosca Signed-off-by: Felipe Balbi --- drivers/usb/gadget/function/u_audio.c | 30 +++++++++++++----------------- 1 file changed, 13 insertions(+), 17 deletions(-) diff --git a/drivers/usb/gadget/function/u_audio.c b/drivers/usb/gadget/function/u_audio.c index 4c6df7130891..b8fc2d6d156f 100644 --- a/drivers/usb/gadget/function/u_audio.c +++ b/drivers/usb/gadget/function/u_audio.c @@ -32,9 +32,6 @@ struct uac_req { struct uac_rtd_params { struct snd_uac_chip *uac; /* parent chip */ bool ep_enabled; /* if the ep is enabled */ - /* Size of the ring buffer */ - size_t dma_bytes; - unsigned char *dma_area; struct snd_pcm_substream *ss; @@ -90,6 +87,7 @@ static void u_audio_iso_complete(struct usb_ep *ep, struct usb_request *req) int status = req->status; struct uac_req *ur = req->context; struct snd_pcm_substream *substream; + struct snd_pcm_runtime *runtime; struct uac_rtd_params *prm = ur->pp; struct snd_uac_chip *uac = prm->uac; @@ -111,6 +109,7 @@ static void u_audio_iso_complete(struct usb_ep *ep, struct usb_request *req) if (!substream) goto exit; + runtime = substream->runtime; spin_lock_irqsave(&prm->lock, flags); if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { @@ -147,29 +146,31 @@ static void u_audio_iso_complete(struct usb_ep *ep, struct usb_request *req) spin_unlock_irqrestore(&prm->lock, flags); /* Pack USB load in ALSA ring buffer */ - pending = prm->dma_bytes - hw_ptr; + pending = runtime->dma_bytes - hw_ptr; if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { if (unlikely(pending < req->actual)) { - memcpy(req->buf, prm->dma_area + hw_ptr, pending); - memcpy(req->buf + pending, prm->dma_area, + memcpy(req->buf, runtime->dma_area + hw_ptr, pending); + memcpy(req->buf + pending, runtime->dma_area, req->actual - pending); } else { - memcpy(req->buf, prm->dma_area + hw_ptr, req->actual); + memcpy(req->buf, runtime->dma_area + hw_ptr, + req->actual); } } else { if (unlikely(pending < req->actual)) { - memcpy(prm->dma_area + hw_ptr, req->buf, pending); - memcpy(prm->dma_area, req->buf + pending, + memcpy(runtime->dma_area + hw_ptr, req->buf, pending); + memcpy(runtime->dma_area, req->buf + pending, req->actual - pending); } else { - memcpy(prm->dma_area + hw_ptr, req->buf, req->actual); + memcpy(runtime->dma_area + hw_ptr, req->buf, + req->actual); } } spin_lock_irqsave(&prm->lock, flags); /* update hw_ptr after data is copied to memory */ - prm->hw_ptr = (hw_ptr + req->actual) % prm->dma_bytes; + prm->hw_ptr = (hw_ptr + req->actual) % runtime->dma_bytes; spin_unlock_irqrestore(&prm->lock, flags); exit: @@ -251,11 +252,8 @@ static int uac_pcm_hw_params(struct snd_pcm_substream *substream, err = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(hw_params)); - if (err >= 0) { - prm->dma_bytes = substream->runtime->dma_bytes; - prm->dma_area = substream->runtime->dma_area; + if (err >= 0) prm->period_size = params_period_bytes(hw_params); - } return err; } @@ -270,8 +268,6 @@ static int uac_pcm_hw_free(struct snd_pcm_substream *substream) else prm = &uac->c_prm; - prm->dma_area = NULL; - prm->dma_bytes = 0; prm->period_size = 0; return snd_pcm_lib_free_pages(substream); -- cgit v1.2.3 From 773e53d50e227b0c03d0bb434c1636f6c49c75b2 Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Thu, 21 Jun 2018 17:22:50 +0200 Subject: usb: gadget: u_audio: remove cached period bytes value Substream period size potentially can be changed in runtime, however this is not accounted in the data copying routine, the change replaces the cached value with an actual value from substream runtime. As a side effect the change also removes a potential division by zero in u_audio_iso_complete() function, if there is a race with uac_pcm_hw_free(), which sets prm->period_size to 0. Fixes: 132fcb460839 ("usb: gadget: Add Audio Class 2.0 Driver") Signed-off-by: Vladimir Zapolskiy Signed-off-by: Eugeniu Rosca Signed-off-by: Felipe Balbi --- drivers/usb/gadget/function/u_audio.c | 40 +++++------------------------------ 1 file changed, 5 insertions(+), 35 deletions(-) diff --git a/drivers/usb/gadget/function/u_audio.c b/drivers/usb/gadget/function/u_audio.c index b8fc2d6d156f..8a63009b7cd5 100644 --- a/drivers/usb/gadget/function/u_audio.c +++ b/drivers/usb/gadget/function/u_audio.c @@ -40,8 +40,6 @@ struct uac_rtd_params { void *rbuf; - size_t period_size; - unsigned max_psize; /* MaxPacketSize of endpoint */ struct uac_req *ureq; @@ -83,7 +81,6 @@ static void u_audio_iso_complete(struct usb_ep *ep, struct usb_request *req) unsigned pending; unsigned long flags; unsigned int hw_ptr; - bool update_alsa = false; int status = req->status; struct uac_req *ur = req->context; struct snd_pcm_substream *substream; @@ -136,11 +133,6 @@ static void u_audio_iso_complete(struct usb_ep *ep, struct usb_request *req) req->actual = req->length; } - pending = prm->hw_ptr % prm->period_size; - pending += req->actual; - if (pending >= prm->period_size) - update_alsa = true; - hw_ptr = prm->hw_ptr; spin_unlock_irqrestore(&prm->lock, flags); @@ -171,14 +163,15 @@ static void u_audio_iso_complete(struct usb_ep *ep, struct usb_request *req) spin_lock_irqsave(&prm->lock, flags); /* update hw_ptr after data is copied to memory */ prm->hw_ptr = (hw_ptr + req->actual) % runtime->dma_bytes; + hw_ptr = prm->hw_ptr; spin_unlock_irqrestore(&prm->lock, flags); + if ((hw_ptr % snd_pcm_lib_period_bytes(substream)) < req->actual) + snd_pcm_period_elapsed(substream); + exit: if (usb_ep_queue(ep, req, GFP_ATOMIC)) dev_err(uac->card->dev, "%d Error!\n", __LINE__); - - if (update_alsa) - snd_pcm_period_elapsed(substream); } static int uac_pcm_trigger(struct snd_pcm_substream *substream, int cmd) @@ -241,35 +234,12 @@ static snd_pcm_uframes_t uac_pcm_pointer(struct snd_pcm_substream *substream) static int uac_pcm_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *hw_params) { - struct snd_uac_chip *uac = snd_pcm_substream_chip(substream); - struct uac_rtd_params *prm; - int err; - - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) - prm = &uac->p_prm; - else - prm = &uac->c_prm; - - err = snd_pcm_lib_malloc_pages(substream, + return snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(hw_params)); - if (err >= 0) - prm->period_size = params_period_bytes(hw_params); - - return err; } static int uac_pcm_hw_free(struct snd_pcm_substream *substream) { - struct snd_uac_chip *uac = snd_pcm_substream_chip(substream); - struct uac_rtd_params *prm; - - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) - prm = &uac->p_prm; - else - prm = &uac->c_prm; - - prm->period_size = 0; - return snd_pcm_lib_free_pages(substream); } -- cgit v1.2.3 From 56bc61587daadef67712068f251c4ef2e3932d94 Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Thu, 21 Jun 2018 17:22:52 +0200 Subject: usb: gadget: u_audio: protect stream runtime fields with stream spinlock The change protects almost the whole body of u_audio_iso_complete() function by PCM stream lock, this is mainly sufficient to avoid a race between USB request completion and stream termination, the change prevents a possibility of invalid memory access in interrupt context by memcpy(): Unable to handle kernel paging request at virtual address 00004e80 pgd = c0004000 [00004e80] *pgd=00000000 Internal error: Oops: 817 [#1] PREEMPT SMP ARM CPU: 0 PID: 3 Comm: ksoftirqd/0 Tainted: G C 3.14.54+ #117 task: da180b80 ti: da192000 task.ti: da192000 PC is at memcpy+0x50/0x330 LR is at 0xcdd92b0e pc : [] lr : [] psr: 20000193 sp : da193ce4 ip : dd86ae26 fp : 0000b180 r10: daf81680 r9 : 00000000 r8 : d58a01ea r7 : 2c0b43e4 r6 : acdfb08b r5 : 01a271cf r4 : 87389377 r3 : 69469782 r2 : 00000020 r1 : daf82fe0 r0 : 00004e80 Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 2b70804a DAC: 00000015 Process ksoftirqd/0 (pid: 3, stack limit = 0xda192238) Also added a check for potential !runtime condition, commonly it is done by PCM_RUNTIME_CHECK(substream) in the beginning, however this does not completely prevent from oopses in u_audio_iso_complete(), because the proper protection scheme must be implemented in PCM library functions. An example of *not fixed* oops due to substream->runtime->* dereference by snd_pcm_running(substream) from snd_pcm_period_elapsed(), where substream->runtime is gone while waiting the substream lock: Unable to handle kernel paging request at virtual address 6b6b6b6b pgd = db7e4000 [6b6b6b6b] *pgd=00000000 CPU: 0 PID: 193 Comm: klogd Tainted: G C 3.14.54+ #118 task: db5ac500 ti: db60c000 task.ti: db60c000 PC is at snd_pcm_period_elapsed+0x48/0xd8 [snd_pcm] LR is at snd_pcm_period_elapsed+0x40/0xd8 [snd_pcm] pc : [<>] lr : [<>] psr: 60000193 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: 2b7e404a DAC: 00000015 Process klogd (pid: 193, stack limit = 0xdb60c238) [<>] (snd_pcm_period_elapsed [snd_pcm]) from [<>] (udc_irq+0x500/0xbbc) [<>] (udc_irq) from [<>] (ci_irq+0x280/0x304) [<>] (ci_irq) from [<>] (handle_irq_event_percpu+0xa4/0x40c) [<>] (handle_irq_event_percpu) from [<>] (handle_irq_event+0x3c/0x5c) [<>] (handle_irq_event) from [<>] (handle_fasteoi_irq+0xc4/0x110) [<>] (handle_fasteoi_irq) from [<>] (generic_handle_irq+0x20/0x30) [<>] (generic_handle_irq) from [<>] (handle_IRQ+0x80/0xc0) [<>] (handle_IRQ) from [<>] (gic_handle_irq+0x3c/0x60) [<>] (gic_handle_irq) from [<>] (__irq_svc+0x44/0x78) Signed-off-by: Vladimir Zapolskiy [erosca: W/o this patch, with minimal instrumentation [1], I can consistently reproduce BUG: KASAN: use-after-free [2]] [1] Instrumentation to reproduce issue [2]: diff --git a/drivers/usb/gadget/function/u_audio.c b/drivers/usb/gadget/function/u_audio.c index a72295c953bb..bd0b308024fe 100644 --- a/drivers/usb/gadget/function/u_audio.c +++ b/drivers/usb/gadget/function/u_audio.c @@ -16,6 +16,7 @@ #include #include #include +#include #include "u_audio.h" @@ -147,6 +148,8 @@ static void u_audio_iso_complete(struct usb_ep *ep, struct usb_request *req) spin_unlock_irqrestore(&prm->lock, flags); + udelay(500); //delay here to increase probability of parallel activities + /* Pack USB load in ALSA ring buffer */ pending = prm->dma_bytes - hw_ptr; [2] After applying [1], below BUG occurs on Rcar-H3-Salvator-X board: ================================================================== BUG: KASAN: use-after-free in u_audio_iso_complete+0x24c/0x520 [u_audio] Read of size 8 at addr ffff8006cafcc248 by task swapper/0/0 CPU: 0 PID: 0 Comm: swapper/0 Tainted: G WC 4.14.47+ #160 Hardware name: Renesas Salvator-X board based on r8a7795 ES2.0+ (DT) Call trace: [] dump_backtrace+0x0/0x364 [] show_stack+0x14/0x1c [] dump_stack+0x108/0x174 [] print_address_description+0x7c/0x32c [] kasan_report+0x324/0x354 [] __asan_load8+0x24/0x94 [] u_audio_iso_complete+0x24c/0x520 [u_audio] [] usb_gadget_giveback_request+0x480/0x4d0 [udc_core] [] usbhsg_queue_done+0x100/0x130 [renesas_usbhs] [] usbhsf_pkt_handler+0x1a4/0x298 [renesas_usbhs] [] usbhsf_irq_ready+0x128/0x178 [renesas_usbhs] [] usbhs_interrupt+0x440/0x490 [renesas_usbhs] [] __handle_irq_event_percpu+0x594/0xa58 [] handle_irq_event_percpu+0x84/0x12c [] handle_irq_event+0xb0/0x10c [] handle_fasteoi_irq+0x1e0/0x2ec [] generic_handle_irq+0x2c/0x44 [] __handle_domain_irq+0x190/0x194 [] gic_handle_irq+0x80/0xac Exception stack(0xffff200009e97c80 to 0xffff200009e97dc0) 7c80: 0000000000000000 0000000000000000 0000000000000003 ffff200008179298 7ca0: ffff20000ae1c180 dfff200000000000 0000000000000000 ffff2000081f9a88 7cc0: ffff200009eb5960 ffff200009e97cf0 0000000000001600 ffff0400041b064b 7ce0: 0000000000000000 0000000000000002 0000000200000001 0000000000000001 7d00: ffff20000842197c 0000ffff958c4970 0000000000000000 ffff8006da0d5b80 7d20: ffff8006d4678498 0000000000000000 000000126bde0a8b ffff8006d4678480 7d40: 0000000000000000 000000126bdbea64 ffff200008fd0000 ffff8006fffff980 7d60: 00000000495f0018 ffff200009e97dc0 ffff200008b6c4ec ffff200009e97dc0 7d80: ffff200008b6c4f0 0000000020000145 ffff8006da0d5b80 ffff8006d4678498 7da0: ffffffffffffffff ffff8006d4678498 ffff200009e97dc0 ffff200008b6c4f0 [] el1_irq+0xb4/0x12c [] cpuidle_enter_state+0x818/0x844 [] cpuidle_enter+0x18/0x20 [] call_cpuidle+0x98/0x9c [] do_idle+0x214/0x264 [] cpu_startup_entry+0x20/0x24 [] rest_init+0x30c/0x320 [] start_kernel+0x570/0x5b0 ---<-snip->--- Fixes: 132fcb460839 ("usb: gadget: Add Audio Class 2.0 Driver") Signed-off-by: Eugeniu Rosca Signed-off-by: Felipe Balbi --- drivers/usb/gadget/function/u_audio.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/usb/gadget/function/u_audio.c b/drivers/usb/gadget/function/u_audio.c index 8a63009b7cd5..fb5ed97572e5 100644 --- a/drivers/usb/gadget/function/u_audio.c +++ b/drivers/usb/gadget/function/u_audio.c @@ -79,7 +79,7 @@ static const struct snd_pcm_hardware uac_pcm_hardware = { static void u_audio_iso_complete(struct usb_ep *ep, struct usb_request *req) { unsigned pending; - unsigned long flags; + unsigned long flags, flags2; unsigned int hw_ptr; int status = req->status; struct uac_req *ur = req->context; @@ -106,7 +106,14 @@ static void u_audio_iso_complete(struct usb_ep *ep, struct usb_request *req) if (!substream) goto exit; + snd_pcm_stream_lock_irqsave(substream, flags2); + runtime = substream->runtime; + if (!runtime || !snd_pcm_running(substream)) { + snd_pcm_stream_unlock_irqrestore(substream, flags2); + goto exit; + } + spin_lock_irqsave(&prm->lock, flags); if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { @@ -165,6 +172,7 @@ static void u_audio_iso_complete(struct usb_ep *ep, struct usb_request *req) prm->hw_ptr = (hw_ptr + req->actual) % runtime->dma_bytes; hw_ptr = prm->hw_ptr; spin_unlock_irqrestore(&prm->lock, flags); + snd_pcm_stream_unlock_irqrestore(substream, flags2); if ((hw_ptr % snd_pcm_lib_period_bytes(substream)) < req->actual) snd_pcm_period_elapsed(substream); -- cgit v1.2.3 From b3eb981be74867af7dbf099df340ad864a91740e Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Fri, 15 Jun 2018 15:01:29 -0700 Subject: usb: dwc2: host: do not delay retries for CONTROL IN transfers When handling split transactions we will try to delay retry after getting a NAK from the device. This works well for BULK transfers that can be polled for essentially forever. Unfortunately, on slower systems at boot time, when the kernel is busy enumerating all the devices (USB or not), we issue a bunch of control requests (reading device descriptors, etc). If we get a NAK for the IN part of the control request and delay retry for too long (because the system is busy), we may confuse the device when we finally get to reissue SSPLIT/CSPLIT IN and the device will respond with STALL. As a result we end up with failure to get device descriptor and will fail to enumerate the device: [ 3.428801] usb 2-1.2.1: new full-speed USB device number 9 using dwc2 [ 3.508576] usb 2-1.2.1: device descriptor read/8, error -32 [ 3.699150] usb 2-1.2.1: device descriptor read/8, error -32 [ 3.891653] usb 2-1.2.1: new full-speed USB device number 10 using dwc2 [ 3.968859] usb 2-1.2.1: device descriptor read/8, error -32 ... Let's not delay retries of split CONTROL IN transfers, as this allows us to reliably enumerate devices at boot time. Fixes: 38d2b5fb75c1 ("usb: dwc2: host: Don't retry NAKed transactions right away") Reviewed-by: Douglas Anderson Signed-off-by: Dmitry Torokhov Signed-off-by: Felipe Balbi --- drivers/usb/dwc2/hcd_intr.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c index ed7f05cf4906..8ce10caf3e19 100644 --- a/drivers/usb/dwc2/hcd_intr.c +++ b/drivers/usb/dwc2/hcd_intr.c @@ -1231,7 +1231,10 @@ static void dwc2_hc_nak_intr(struct dwc2_hsotg *hsotg, * avoid interrupt storms we'll wait before retrying if we've got * several NAKs. If we didn't do this we'd retry directly from the * interrupt handler and could end up quickly getting another - * interrupt (another NAK), which we'd retry. + * interrupt (another NAK), which we'd retry. Note that we do not + * delay retries for IN parts of control requests, as those are expected + * to complete fairly quickly, and if we delay them we risk confusing + * the device and cause it issue STALL. * * Note that in DMA mode software only gets involved to re-send NAKed * transfers for split transactions, so we only need to apply this @@ -1244,7 +1247,9 @@ static void dwc2_hc_nak_intr(struct dwc2_hsotg *hsotg, qtd->error_count = 0; qtd->complete_split = 0; qtd->num_naks++; - qtd->qh->want_wait = qtd->num_naks >= DWC2_NAKS_BEFORE_DELAY; + qtd->qh->want_wait = qtd->num_naks >= DWC2_NAKS_BEFORE_DELAY && + !(chan->ep_type == USB_ENDPOINT_XFER_CONTROL && + chan->ep_is_in); dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_NAK); goto handle_nak_done; } -- cgit v1.2.3 From a39ba90a1cc7010edb0a7132e1b67f3d80b994e9 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 15 Jul 2018 10:37:37 -0700 Subject: usb/phy: fix PPC64 build errors in phy-fsl-usb.c Fix build errors when built for PPC64: These variables are only used on PPC32 so they don't need to be initialized for PPC64. ../drivers/usb/phy/phy-fsl-usb.c: In function 'usb_otg_start': ../drivers/usb/phy/phy-fsl-usb.c:865:3: error: '_fsl_readl' undeclared (first use in this function); did you mean 'fsl_readl'? _fsl_readl = _fsl_readl_be; ../drivers/usb/phy/phy-fsl-usb.c:865:16: error: '_fsl_readl_be' undeclared (first use in this function); did you mean 'fsl_readl'? _fsl_readl = _fsl_readl_be; ../drivers/usb/phy/phy-fsl-usb.c:866:3: error: '_fsl_writel' undeclared (first use in this function); did you mean 'fsl_writel'? _fsl_writel = _fsl_writel_be; ../drivers/usb/phy/phy-fsl-usb.c:866:17: error: '_fsl_writel_be' undeclared (first use in this function); did you mean 'fsl_writel'? _fsl_writel = _fsl_writel_be; ../drivers/usb/phy/phy-fsl-usb.c:868:16: error: '_fsl_readl_le' undeclared (first use in this function); did you mean 'fsl_readl'? _fsl_readl = _fsl_readl_le; ../drivers/usb/phy/phy-fsl-usb.c:869:17: error: '_fsl_writel_le' undeclared (first use in this function); did you mean 'fsl_writel'? _fsl_writel = _fsl_writel_le; and the sysfs "show" function return type should be ssize_t, not int: ../drivers/usb/phy/phy-fsl-usb.c:1042:49: error: initialization of 'ssize_t (*)(struct device *, struct device_attribute *, char *)' {aka 'long int (*)(struct device *, struct device_attribute *, char *)'} from incompatible pointer type 'int (*)(struct device *, struct device_attribute *, char *)' [-Werror=incompatible-pointer-types] static DEVICE_ATTR(fsl_usb2_otg_state, S_IRUGO, show_fsl_usb2_otg_state, NULL); Signed-off-by: Randy Dunlap Cc: Felipe Balbi Cc: linux-usb@vger.kernel.org Cc: Michael Ellerman Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-fsl-usb.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/phy/phy-fsl-usb.c b/drivers/usb/phy/phy-fsl-usb.c index 900875f326d7..f7c96d209eda 100644 --- a/drivers/usb/phy/phy-fsl-usb.c +++ b/drivers/usb/phy/phy-fsl-usb.c @@ -861,6 +861,7 @@ int usb_otg_start(struct platform_device *pdev) if (pdata->init && pdata->init(pdev) != 0) return -EINVAL; +#ifdef CONFIG_PPC32 if (pdata->big_endian_mmio) { _fsl_readl = _fsl_readl_be; _fsl_writel = _fsl_writel_be; @@ -868,6 +869,7 @@ int usb_otg_start(struct platform_device *pdev) _fsl_readl = _fsl_readl_le; _fsl_writel = _fsl_writel_le; } +#endif /* request irq */ p_otg->irq = platform_get_irq(pdev, 0); @@ -958,7 +960,7 @@ int usb_otg_start(struct platform_device *pdev) /* * state file in sysfs */ -static int show_fsl_usb2_otg_state(struct device *dev, +static ssize_t show_fsl_usb2_otg_state(struct device *dev, struct device_attribute *attr, char *buf) { struct otg_fsm *fsm = &fsl_otg_dev->fsm; -- cgit v1.2.3 From 89066b36c43dc9100ad2c86e0b6bf8c81ca0b4d4 Mon Sep 17 00:00:00 2001 From: John Keeping Date: Sun, 15 Jul 2018 15:50:43 +0100 Subject: usb: dwc2: avoid NULL dereferences For unidirectional endpoints, the endpoint pointer will be NULL for the unused direction. Check that the endpoint is active before dereferencing this pointer. Fixes: 1b4977c793d3 ("usb: dwc2: Update dwc2_handle_incomplete_isoc_in() function") Fixes: 689efb2619b5 ("usb: dwc2: Update dwc2_handle_incomplete_isoc_out() function") Fixes: d84845522d93 ("usb: dwc2: Update GINTSTS_GOUTNAKEFF interrupt handling") Signed-off-by: John Keeping Signed-off-by: Felipe Balbi --- drivers/usb/dwc2/gadget.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index a0f82cca2d9a..cefc99ae69b2 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -3430,7 +3430,7 @@ static void dwc2_gadget_handle_incomplete_isoc_in(struct dwc2_hsotg *hsotg) for (idx = 1; idx < hsotg->num_of_eps; idx++) { hs_ep = hsotg->eps_in[idx]; /* Proceed only unmasked ISOC EPs */ - if (!hs_ep->isochronous || (BIT(idx) & ~daintmsk)) + if ((BIT(idx) & ~daintmsk) || !hs_ep->isochronous) continue; epctrl = dwc2_readl(hsotg->regs + DIEPCTL(idx)); @@ -3476,7 +3476,7 @@ static void dwc2_gadget_handle_incomplete_isoc_out(struct dwc2_hsotg *hsotg) for (idx = 1; idx < hsotg->num_of_eps; idx++) { hs_ep = hsotg->eps_out[idx]; /* Proceed only unmasked ISOC EPs */ - if (!hs_ep->isochronous || (BIT(idx) & ~daintmsk)) + if ((BIT(idx) & ~daintmsk) || !hs_ep->isochronous) continue; epctrl = dwc2_readl(hsotg->regs + DOEPCTL(idx)); @@ -3650,7 +3650,7 @@ irq_retry: for (idx = 1; idx < hsotg->num_of_eps; idx++) { hs_ep = hsotg->eps_out[idx]; /* Proceed only unmasked ISOC EPs */ - if (!hs_ep->isochronous || (BIT(idx) & ~daintmsk)) + if ((BIT(idx) & ~daintmsk) || !hs_ep->isochronous) continue; epctrl = dwc2_readl(hsotg->regs + DOEPCTL(idx)); -- cgit v1.2.3 From 9566a7c72f4f09b094c5517556d2b5f36a11b4ef Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Fri, 13 Jul 2018 10:24:33 +0100 Subject: usb: dwc3: gadget: remove redundant variable maxpacket Variable maxpacket is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'maxpacket' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/ep0.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index c77ff50a88a2..8efde178eef4 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -973,15 +973,12 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc, ret = dwc3_ep0_start_trans(dep); } else if (IS_ALIGNED(req->request.length, dep->endpoint.maxpacket) && req->request.length && req->request.zero) { - u32 maxpacket; ret = usb_gadget_map_request_by_dev(dwc->sysdev, &req->request, dep->number); if (ret) return; - maxpacket = dep->endpoint.maxpacket; - /* prepare normal TRB */ dwc3_ep0_prepare_one_trb(dep, req->request.dma, req->request.length, -- cgit v1.2.3 From bb2863369562b3f0320fc7d8a96a5cde4b50aaea Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 12 Jul 2018 15:05:02 +1000 Subject: usb: gadget: aspeed: Workaround memory ordering issue The Aspeed SoC has a memory ordering issue that (thankfully) only affects the USB gadget device. A read back is necessary after writing to memory and before letting the device DMA from it. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Felipe Balbi --- drivers/usb/gadget/udc/aspeed-vhub/ep0.c | 2 ++ drivers/usb/gadget/udc/aspeed-vhub/epn.c | 14 ++++++++++--- drivers/usb/gadget/udc/aspeed-vhub/vhub.h | 33 +++++++++++++++++++++++++++++++ 3 files changed, 46 insertions(+), 3 deletions(-) diff --git a/drivers/usb/gadget/udc/aspeed-vhub/ep0.c b/drivers/usb/gadget/udc/aspeed-vhub/ep0.c index 44f2b3b53b2f..e2927fb083cf 100644 --- a/drivers/usb/gadget/udc/aspeed-vhub/ep0.c +++ b/drivers/usb/gadget/udc/aspeed-vhub/ep0.c @@ -219,6 +219,8 @@ static void ast_vhub_ep0_do_send(struct ast_vhub_ep *ep, if (chunk && req->req.buf) memcpy(ep->buf, req->req.buf + req->req.actual, chunk); + vhub_dma_workaround(ep->buf); + /* Remember chunk size and trigger send */ reg = VHUB_EP0_SET_TX_LEN(chunk); writel(reg, ep->ep0.ctlstat); diff --git a/drivers/usb/gadget/udc/aspeed-vhub/epn.c b/drivers/usb/gadget/udc/aspeed-vhub/epn.c index 80c9feac5147..5939eb1e97f2 100644 --- a/drivers/usb/gadget/udc/aspeed-vhub/epn.c +++ b/drivers/usb/gadget/udc/aspeed-vhub/epn.c @@ -66,11 +66,16 @@ static void ast_vhub_epn_kick(struct ast_vhub_ep *ep, struct ast_vhub_req *req) if (!req->req.dma) { /* For IN transfers, copy data over first */ - if (ep->epn.is_in) + if (ep->epn.is_in) { memcpy(ep->buf, req->req.buf + act, chunk); + vhub_dma_workaround(ep->buf); + } writel(ep->buf_dma, ep->epn.regs + AST_VHUB_EP_DESC_BASE); - } else + } else { + if (ep->epn.is_in) + vhub_dma_workaround(req->req.buf); writel(req->req.dma + act, ep->epn.regs + AST_VHUB_EP_DESC_BASE); + } /* Start DMA */ req->active = true; @@ -161,6 +166,7 @@ static inline unsigned int ast_vhub_count_free_descs(struct ast_vhub_ep *ep) static void ast_vhub_epn_kick_desc(struct ast_vhub_ep *ep, struct ast_vhub_req *req) { + struct ast_vhub_desc *desc = NULL; unsigned int act = req->act_count; unsigned int len = req->req.length; unsigned int chunk; @@ -177,7 +183,6 @@ static void ast_vhub_epn_kick_desc(struct ast_vhub_ep *ep, /* While we can create descriptors */ while (ast_vhub_count_free_descs(ep) && req->last_desc < 0) { - struct ast_vhub_desc *desc; unsigned int d_num; /* Grab next free descriptor */ @@ -227,6 +232,9 @@ static void ast_vhub_epn_kick_desc(struct ast_vhub_ep *ep, req->act_count = act = act + chunk; } + if (likely(desc)) + vhub_dma_workaround(desc); + /* Tell HW about new descriptors */ writel(VHUB_EP_DMA_SET_CPU_WPTR(ep->epn.d_next), ep->epn.regs + AST_VHUB_EP_DESC_STATUS); diff --git a/drivers/usb/gadget/udc/aspeed-vhub/vhub.h b/drivers/usb/gadget/udc/aspeed-vhub/vhub.h index 2b040257bc1f..4ed03d33a5a9 100644 --- a/drivers/usb/gadget/udc/aspeed-vhub/vhub.h +++ b/drivers/usb/gadget/udc/aspeed-vhub/vhub.h @@ -462,6 +462,39 @@ enum std_req_rc { #define DDBG(d, fmt, ...) do { } while(0) #endif +static inline void vhub_dma_workaround(void *addr) +{ + /* + * This works around a confirmed HW issue with the Aspeed chip. + * + * The core uses a different bus to memory than the AHB going to + * the USB device controller. Due to the latter having a higher + * priority than the core for arbitration on that bus, it's + * possible for an MMIO to the device, followed by a DMA by the + * device from memory to all be performed and services before + * a previous store to memory gets completed. + * + * This the following scenario can happen: + * + * - Driver writes to a DMA descriptor (Mbus) + * - Driver writes to the MMIO register to start the DMA (AHB) + * - The gadget sees the second write and sends a read of the + * descriptor to the memory controller (Mbus) + * - The gadget hits memory before the descriptor write + * causing it to read an obsolete value. + * + * Thankfully the problem is limited to the USB gadget device, other + * masters in the SoC all have a lower priority than the core, thus + * ensuring that the store by the core arrives first. + * + * The workaround consists of using a dummy read of the memory before + * doing the MMIO writes. This will ensure that the previous writes + * have been "pushed out". + */ + mb(); + (void)__raw_readl((void __iomem *)addr); +} + /* core.c */ void ast_vhub_done(struct ast_vhub_ep *ep, struct ast_vhub_req *req, int status); -- cgit v1.2.3 From a2b22dddc7bb6110ac3b5ed1a60aa9279836fadb Mon Sep 17 00:00:00 2001 From: Peter Senna Tschudin Date: Tue, 10 Jul 2018 16:01:45 +0200 Subject: tools: usb: ffs-test: Fix build on big endian systems MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The tools/usb/ffs-test.c file defines cpu_to_le16/32 by using the C library htole16/32 function calls. However, cpu_to_le16/32 are used when initializing structures, i.e in a context where a function call is not allowed. It works fine on little endian systems because htole16/32 are defined by the C library as no-ops. But on big-endian systems, they are actually doing something, which might involve calling a function, causing build failures, such as: ffs-test.c:48:25: error: initializer element is not constant #define cpu_to_le32(x) htole32(x) ^~~~~~~ ffs-test.c:128:12: note: in expansion of macro ‘cpu_to_le32’ .magic = cpu_to_le32(FUNCTIONFS_DESCRIPTORS_MAGIC_V2), ^~~~~~~~~~~ To solve this, we code cpu_to_le16/32 in a way that allows them to be used when initializing structures. This fix was imported from meta-openembedded/android-tools/fix-big-endian-build.patch written by Thomas Petazzoni . CC: Thomas Petazzoni Signed-off-by: Peter Senna Tschudin Signed-off-by: Felipe Balbi --- tools/usb/ffs-test.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) diff --git a/tools/usb/ffs-test.c b/tools/usb/ffs-test.c index 95dd14648ba5..0f395dfb7774 100644 --- a/tools/usb/ffs-test.c +++ b/tools/usb/ffs-test.c @@ -44,12 +44,25 @@ /******************** Little Endian Handling ********************************/ -#define cpu_to_le16(x) htole16(x) -#define cpu_to_le32(x) htole32(x) +/* + * cpu_to_le16/32 are used when initializing structures, a context where a + * function call is not allowed. To solve this, we code cpu_to_le16/32 in a way + * that allows them to be used when initializing structures. + */ + +#if __BYTE_ORDER == __LITTLE_ENDIAN +#define cpu_to_le16(x) (x) +#define cpu_to_le32(x) (x) +#else +#define cpu_to_le16(x) ((((x) >> 8) & 0xffu) | (((x) & 0xffu) << 8)) +#define cpu_to_le32(x) \ + ((((x) & 0xff000000u) >> 24) | (((x) & 0x00ff0000u) >> 8) | \ + (((x) & 0x0000ff00u) << 8) | (((x) & 0x000000ffu) << 24)) +#endif + #define le32_to_cpu(x) le32toh(x) #define le16_to_cpu(x) le16toh(x) - /******************** Messages and Errors ***********************************/ static const char argv0[] = "ffs-test"; -- cgit v1.2.3 From 33d8a2f6ac33667e91e10f723b1e95f6e6b3626c Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Tue, 10 Jul 2018 14:58:48 +0200 Subject: usb: dwc3: rockchip: Fix PHY documentation links. Commit 34962fb8070c ("docs: Fix more broken references") replaced the broken reference to rockchip,dwc3-usb-phy.txt binding for the Qualcomm DWC3 binding (qcom-dwc3-usb-phy.txt). That's wrong, so replace that reference for the correct ones. Fixes: 34962fb8070c ("docs: Fix more broken references") Reviewed-by: Heiko Stuebner Signed-off-by: Enric Balletbo i Serra Signed-off-by: Felipe Balbi --- Documentation/devicetree/bindings/usb/rockchip,dwc3.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt index 252a05c5d976..c8c4b00ecb94 100644 --- a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt +++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt @@ -16,7 +16,8 @@ A child node must exist to represent the core DWC3 IP block. The name of the node is not important. The content of the node is defined in dwc3.txt. Phy documentation is provided in the following places: -Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt +Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt - USB2.0 PHY +Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt - Type-C PHY Example device nodes: -- cgit v1.2.3 From 56406e017a883b54b339207b230f85599f4d70ae Mon Sep 17 00:00:00 2001 From: Antti Seppälä Date: Thu, 5 Jul 2018 17:31:53 +0300 Subject: usb: dwc2: Fix DMA alignment to start at allocated boundary MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The commit 3bc04e28a030 ("usb: dwc2: host: Get aligned DMA in a more supported way") introduced a common way to align DMA allocations. The code in the commit aligns the struct dma_aligned_buffer but the actual DMA address pointed by data[0] gets aligned to an offset from the allocated boundary by the kmalloc_ptr and the old_xfer_buffer pointers. This is against the recommendation in Documentation/DMA-API.txt which states: Therefore, it is recommended that driver writers who don't take special care to determine the cache line size at run time only map virtual regions that begin and end on page boundaries (which are guaranteed also to be cache line boundaries). The effect of this is that architectures with non-coherent DMA caches may run into memory corruption or kernel crashes with Unhandled kernel unaligned accesses exceptions. Fix the alignment by positioning the DMA area in front of the allocation and use memory at the end of the area for storing the orginal transfer_buffer pointer. This may have the added benefit of increased performance as the DMA area is now fully aligned on all architectures. Tested with Lantiq xRX200 (MIPS) and RPi Model B Rev 2 (ARM). Fixes: 3bc04e28a030 ("usb: dwc2: host: Get aligned DMA in a more supported way") Cc: Reviewed-by: Douglas Anderson Signed-off-by: Antti Seppälä Signed-off-by: Felipe Balbi --- drivers/usb/dwc2/hcd.c | 44 +++++++++++++++++++++++--------------------- 1 file changed, 23 insertions(+), 21 deletions(-) diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index b1104be3429c..2ed0ac18e053 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -2665,34 +2665,29 @@ static int dwc2_alloc_split_dma_aligned_buf(struct dwc2_hsotg *hsotg, #define DWC2_USB_DMA_ALIGN 4 -struct dma_aligned_buffer { - void *kmalloc_ptr; - void *old_xfer_buffer; - u8 data[0]; -}; - static void dwc2_free_dma_aligned_buffer(struct urb *urb) { - struct dma_aligned_buffer *temp; + void *stored_xfer_buffer; if (!(urb->transfer_flags & URB_ALIGNED_TEMP_BUFFER)) return; - temp = container_of(urb->transfer_buffer, - struct dma_aligned_buffer, data); + /* Restore urb->transfer_buffer from the end of the allocated area */ + memcpy(&stored_xfer_buffer, urb->transfer_buffer + + urb->transfer_buffer_length, sizeof(urb->transfer_buffer)); if (usb_urb_dir_in(urb)) - memcpy(temp->old_xfer_buffer, temp->data, + memcpy(stored_xfer_buffer, urb->transfer_buffer, urb->transfer_buffer_length); - urb->transfer_buffer = temp->old_xfer_buffer; - kfree(temp->kmalloc_ptr); + kfree(urb->transfer_buffer); + urb->transfer_buffer = stored_xfer_buffer; urb->transfer_flags &= ~URB_ALIGNED_TEMP_BUFFER; } static int dwc2_alloc_dma_aligned_buffer(struct urb *urb, gfp_t mem_flags) { - struct dma_aligned_buffer *temp, *kmalloc_ptr; + void *kmalloc_ptr; size_t kmalloc_size; if (urb->num_sgs || urb->sg || @@ -2700,22 +2695,29 @@ static int dwc2_alloc_dma_aligned_buffer(struct urb *urb, gfp_t mem_flags) !((uintptr_t)urb->transfer_buffer & (DWC2_USB_DMA_ALIGN - 1))) return 0; - /* Allocate a buffer with enough padding for alignment */ + /* + * Allocate a buffer with enough padding for original transfer_buffer + * pointer. This allocation is guaranteed to be aligned properly for + * DMA + */ kmalloc_size = urb->transfer_buffer_length + - sizeof(struct dma_aligned_buffer) + DWC2_USB_DMA_ALIGN - 1; + sizeof(urb->transfer_buffer); kmalloc_ptr = kmalloc(kmalloc_size, mem_flags); if (!kmalloc_ptr) return -ENOMEM; - /* Position our struct dma_aligned_buffer such that data is aligned */ - temp = PTR_ALIGN(kmalloc_ptr + 1, DWC2_USB_DMA_ALIGN) - 1; - temp->kmalloc_ptr = kmalloc_ptr; - temp->old_xfer_buffer = urb->transfer_buffer; + /* + * Position value of original urb->transfer_buffer pointer to the end + * of allocation for later referencing + */ + memcpy(kmalloc_ptr + urb->transfer_buffer_length, + &urb->transfer_buffer, sizeof(urb->transfer_buffer)); + if (usb_urb_dir_out(urb)) - memcpy(temp->data, urb->transfer_buffer, + memcpy(kmalloc_ptr, urb->transfer_buffer, urb->transfer_buffer_length); - urb->transfer_buffer = temp->data; + urb->transfer_buffer = kmalloc_ptr; urb->transfer_flags |= URB_ALIGNED_TEMP_BUFFER; -- cgit v1.2.3 From 1e111e885238bd861fd64273aab2ad1f803e34a3 Mon Sep 17 00:00:00 2001 From: Antti Seppälä Date: Thu, 5 Jul 2018 17:31:54 +0300 Subject: usb: dwc2: Fix inefficient copy of unaligned buffers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Make sure only to copy any actual data rather than the whole buffer, when releasing the temporary buffer used for unaligned non-isochronous transfers. Taken directly from commit 0efd937e27d5e ("USB: ehci-tegra: fix inefficient copy of unaligned buffers") Tested with Lantiq xRX200 (MIPS) and RPi Model B Rev 2 (ARM) Reviewed-by: Douglas Anderson Signed-off-by: Antti Seppälä Signed-off-by: Felipe Balbi --- drivers/usb/dwc2/hcd.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index 2ed0ac18e053..6e2cdd7b93d4 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -2668,6 +2668,7 @@ static int dwc2_alloc_split_dma_aligned_buf(struct dwc2_hsotg *hsotg, static void dwc2_free_dma_aligned_buffer(struct urb *urb) { void *stored_xfer_buffer; + size_t length; if (!(urb->transfer_flags & URB_ALIGNED_TEMP_BUFFER)) return; @@ -2676,9 +2677,14 @@ static void dwc2_free_dma_aligned_buffer(struct urb *urb) memcpy(&stored_xfer_buffer, urb->transfer_buffer + urb->transfer_buffer_length, sizeof(urb->transfer_buffer)); - if (usb_urb_dir_in(urb)) - memcpy(stored_xfer_buffer, urb->transfer_buffer, - urb->transfer_buffer_length); + if (usb_urb_dir_in(urb)) { + if (usb_pipeisoc(urb->pipe)) + length = urb->transfer_buffer_length; + else + length = urb->actual_length; + + memcpy(stored_xfer_buffer, urb->transfer_buffer, length); + } kfree(urb->transfer_buffer); urb->transfer_buffer = stored_xfer_buffer; -- cgit v1.2.3 From eec24f2a0d4dc3b1d95a3ccd2feb523ede3ba775 Mon Sep 17 00:00:00 2001 From: Eugeniu Rosca Date: Mon, 2 Jul 2018 23:46:47 +0200 Subject: usb: gadget: f_uac2: fix endianness of 'struct cntrl_*_lay3' The list [1] of commits doing endianness fixes in USB subsystem is long due to below quote from USB spec Revision 2.0 from April 27, 2000: ------------ 8.1 Byte/Bit Ordering Multiple byte fields in standard descriptors, requests, and responses are interpreted as and moved over the bus in little-endian order, i.e. LSB to MSB. ------------ This commit belongs to the same family. [1] Example of endianness fixes in USB subsystem: commit 14e1d56cbea6 ("usb: gadget: f_uac2: endianness fixes.") commit 42370b821168 ("usb: gadget: f_uac1: endianness fixes.") commit 63afd5cc7877 ("USB: chaoskey: fix Alea quirk on big-endian hosts") commit 74098c4ac782 ("usb: gadget: acm: fix endianness in notifications") commit cdd7928df0d2 ("ACM gadget: fix endianness in notifications") commit 323ece54e076 ("cdc-wdm: fix endianness bug in debug statements") commit e102609f1072 ("usb: gadget: uvc: Fix endianness mismatches") list goes on Fixes: 132fcb460839 ("usb: gadget: Add Audio Class 2.0 Driver") Signed-off-by: Eugeniu Rosca Reviewed-by: Ruslan Bilovol Signed-off-by: Felipe Balbi --- drivers/usb/gadget/function/f_uac2.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/usb/gadget/function/f_uac2.c b/drivers/usb/gadget/function/f_uac2.c index 6954db22c2f3..d582921f7257 100644 --- a/drivers/usb/gadget/function/f_uac2.c +++ b/drivers/usb/gadget/function/f_uac2.c @@ -438,14 +438,14 @@ static struct usb_descriptor_header *hs_audio_desc[] = { }; struct cntrl_cur_lay3 { - __u32 dCUR; + __le32 dCUR; }; struct cntrl_range_lay3 { - __u16 wNumSubRanges; - __u32 dMIN; - __u32 dMAX; - __u32 dRES; + __le16 wNumSubRanges; + __le32 dMIN; + __le32 dMAX; + __le32 dRES; } __packed; static void set_ep_max_packet_size(const struct f_uac2_opts *uac2_opts, @@ -703,9 +703,9 @@ in_rq_cur(struct usb_function *fn, const struct usb_ctrlrequest *cr) memset(&c, 0, sizeof(struct cntrl_cur_lay3)); if (entity_id == USB_IN_CLK_ID) - c.dCUR = p_srate; + c.dCUR = cpu_to_le32(p_srate); else if (entity_id == USB_OUT_CLK_ID) - c.dCUR = c_srate; + c.dCUR = cpu_to_le32(c_srate); value = min_t(unsigned, w_length, sizeof c); memcpy(req->buf, &c, value); @@ -742,15 +742,15 @@ in_rq_range(struct usb_function *fn, const struct usb_ctrlrequest *cr) if (control_selector == UAC2_CS_CONTROL_SAM_FREQ) { if (entity_id == USB_IN_CLK_ID) - r.dMIN = p_srate; + r.dMIN = cpu_to_le32(p_srate); else if (entity_id == USB_OUT_CLK_ID) - r.dMIN = c_srate; + r.dMIN = cpu_to_le32(c_srate); else return -EOPNOTSUPP; r.dMAX = r.dMIN; r.dRES = 0; - r.wNumSubRanges = 1; + r.wNumSubRanges = cpu_to_le16(1); value = min_t(unsigned, w_length, sizeof r); memcpy(req->buf, &r, value); -- cgit v1.2.3 From 941d810725ad48cc21948f4cff8cf70fa2a67cf9 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Mon, 16 Jul 2018 23:52:14 +1000 Subject: powerpc/xmon: Fix disassembly since printf changes The recent change to add printf annotations to xmon inadvertently made the disassembly output ugly, eg: c00000002001e058 7ee00026 mfcr r23 c00000002001e05c fffffffffae101a0 std r23,416(r1) c00000002001e060 fffffffff8230000 std r1,0(r3) The problem being that negative 32-bit values are being displayed in full 64-bits. The printf conversion was actually correct, we are passing unsigned long so it should use "lx". But powerpc instructions are only 4 bytes and the code only reads 4 bytes, so inst should really just be unsigned int, and that also fixes the printing to look the way we want: c00000002001e058 7ee00026 mfcr r23 c00000002001e05c fae101a0 std r23,416(r1) c00000002001e060 f8230000 std r1,0(r3) Fixes: e70d8f55268b ("powerpc/xmon: Add __printf annotation to xmon_printf()") Signed-off-by: Michael Ellerman --- arch/powerpc/xmon/xmon.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index 47166ad2a669..196978733e64 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -2734,7 +2734,7 @@ generic_inst_dump(unsigned long adr, long count, int praddr, { int nr, dotted; unsigned long first_adr; - unsigned long inst, last_inst = 0; + unsigned int inst, last_inst = 0; unsigned char val[4]; dotted = 0; @@ -2758,7 +2758,7 @@ generic_inst_dump(unsigned long adr, long count, int praddr, dotted = 0; last_inst = inst; if (praddr) - printf(REG" %.8lx", adr, inst); + printf(REG" %.8x", adr, inst); printf("\t"); dump_func(inst, adr); printf("\n"); -- cgit v1.2.3 From 665d4953cde6d9e75c62a07ec8f4f8fd7d396ade Mon Sep 17 00:00:00 2001 From: Qu Wenruo Date: Wed, 11 Jul 2018 13:41:21 +0800 Subject: btrfs: scrub: Don't use inode page cache in scrub_handle_errored_block() In commit ac0b4145d662 ("btrfs: scrub: Don't use inode pages for device replace") we removed the branch of copy_nocow_pages() to avoid corruption for compressed nodatasum extents. However above commit only solves the problem in scrub_extent(), if during scrub_pages() we failed to read some pages, sctx->no_io_error_seen will be non-zero and we go to fixup function scrub_handle_errored_block(). In scrub_handle_errored_block(), for sctx without csum (no matter if we're doing replace or scrub) we go to scrub_fixup_nodatasum() routine, which does the similar thing with copy_nocow_pages(), but does it without the extra check in copy_nocow_pages() routine. So for test cases like btrfs/100, where we emulate read errors during replace/scrub, we could corrupt compressed extent data again. This patch will fix it just by avoiding any "optimization" for nodatasum, just falls back to the normal fixup routine by try read from any good copy. This also solves WARN_ON() or dead lock caused by lame backref iteration in scrub_fixup_nodatasum() routine. The deadlock or WARN_ON() won't be triggered before commit ac0b4145d662 ("btrfs: scrub: Don't use inode pages for device replace") since copy_nocow_pages() have better locking and extra check for data extent, and it's already doing the fixup work by try to read data from any good copy, so it won't go scrub_fixup_nodatasum() anyway. This patch disables the faulty code and will be removed completely in a followup patch. Fixes: ac0b4145d662 ("btrfs: scrub: Don't use inode pages for device replace") Signed-off-by: Qu Wenruo Signed-off-by: David Sterba --- fs/btrfs/scrub.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/fs/btrfs/scrub.c b/fs/btrfs/scrub.c index 572306036477..6702896cdb8f 100644 --- a/fs/btrfs/scrub.c +++ b/fs/btrfs/scrub.c @@ -1151,11 +1151,6 @@ static int scrub_handle_errored_block(struct scrub_block *sblock_to_check) return ret; } - if (sctx->is_dev_replace && !is_metadata && !have_csum) { - sblocks_for_recheck = NULL; - goto nodatasum_case; - } - /* * read all mirrors one after the other. This includes to * re-read the extent or metadata block that failed (that was @@ -1268,13 +1263,19 @@ static int scrub_handle_errored_block(struct scrub_block *sblock_to_check) goto out; } - if (!is_metadata && !have_csum) { + /* + * NOTE: Even for nodatasum case, it's still possible that it's a + * compressed data extent, thus scrub_fixup_nodatasum(), which write + * inode page cache onto disk, could cause serious data corruption. + * + * So here we could only read from disk, and hope our recovery could + * reach disk before the newer write. + */ + if (0 && !is_metadata && !have_csum) { struct scrub_fixup_nodatasum *fixup_nodatasum; WARN_ON(sctx->is_dev_replace); -nodatasum_case: - /* * !is_metadata and !have_csum, this means that the data * might not be COWed, that it might be modified -- cgit v1.2.3 From cf39a6bc342b980f10f344d88035829638a89a48 Mon Sep 17 00:00:00 2001 From: Scott Bauer Date: Fri, 29 Jun 2018 13:03:28 -0600 Subject: nvme: ensure forward progress during Admin passthru If the controller supports effects and goes down during the passthru admin command we will deadlock during namespace revalidation. [ 363.488275] INFO: task kworker/u16:5:231 blocked for more than 120 seconds. [ 363.488290] Not tainted 4.17.0+ #2 [ 363.488296] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 363.488303] kworker/u16:5 D 0 231 2 0x80000000 [ 363.488331] Workqueue: nvme-reset-wq nvme_reset_work [nvme] [ 363.488338] Call Trace: [ 363.488385] schedule+0x75/0x190 [ 363.488396] rwsem_down_read_failed+0x1c3/0x2f0 [ 363.488481] call_rwsem_down_read_failed+0x14/0x30 [ 363.488504] down_read+0x1d/0x80 [ 363.488523] nvme_stop_queues+0x1e/0xa0 [nvme_core] [ 363.488536] nvme_dev_disable+0xae4/0x1620 [nvme] [ 363.488614] nvme_reset_work+0xd1e/0x49d9 [nvme] [ 363.488911] process_one_work+0x81a/0x1400 [ 363.488934] worker_thread+0x87/0xe80 [ 363.488955] kthread+0x2db/0x390 [ 363.488977] ret_from_fork+0x35/0x40 Fixes: 84fef62d135b6 ("nvme: check admin passthru command effects") Signed-off-by: Scott Bauer Reviewed-by: Keith Busch Signed-off-by: Christoph Hellwig --- drivers/nvme/host/core.c | 50 +++++++++++++++++++++++++----------------------- 1 file changed, 26 insertions(+), 24 deletions(-) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 46df030b2c3f..e7668c4bb4dd 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -100,6 +100,22 @@ static struct class *nvme_subsys_class; static void nvme_ns_remove(struct nvme_ns *ns); static int nvme_revalidate_disk(struct gendisk *disk); static void nvme_put_subsystem(struct nvme_subsystem *subsys); +static void nvme_remove_invalid_namespaces(struct nvme_ctrl *ctrl, + unsigned nsid); + +static void nvme_set_queue_dying(struct nvme_ns *ns) +{ + /* + * Revalidating a dead namespace sets capacity to 0. This will end + * buffered writers dirtying pages that can't be synced. + */ + if (!ns->disk || test_and_set_bit(NVME_NS_DEAD, &ns->flags)) + return; + revalidate_disk(ns->disk); + blk_set_queue_dying(ns->queue); + /* Forcibly unquiesce queues to avoid blocking dispatch */ + blk_mq_unquiesce_queue(ns->queue); +} static void nvme_queue_scan(struct nvme_ctrl *ctrl) { @@ -1151,19 +1167,15 @@ static u32 nvme_passthru_start(struct nvme_ctrl *ctrl, struct nvme_ns *ns, static void nvme_update_formats(struct nvme_ctrl *ctrl) { - struct nvme_ns *ns, *next; - LIST_HEAD(rm_list); + struct nvme_ns *ns; - down_write(&ctrl->namespaces_rwsem); - list_for_each_entry(ns, &ctrl->namespaces, list) { - if (ns->disk && nvme_revalidate_disk(ns->disk)) { - list_move_tail(&ns->list, &rm_list); - } - } - up_write(&ctrl->namespaces_rwsem); + down_read(&ctrl->namespaces_rwsem); + list_for_each_entry(ns, &ctrl->namespaces, list) + if (ns->disk && nvme_revalidate_disk(ns->disk)) + nvme_set_queue_dying(ns); + up_read(&ctrl->namespaces_rwsem); - list_for_each_entry_safe(ns, next, &rm_list, list) - nvme_ns_remove(ns); + nvme_remove_invalid_namespaces(ctrl, NVME_NSID_ALL); } static void nvme_passthru_end(struct nvme_ctrl *ctrl, u32 effects) @@ -3138,7 +3150,7 @@ static void nvme_remove_invalid_namespaces(struct nvme_ctrl *ctrl, down_write(&ctrl->namespaces_rwsem); list_for_each_entry_safe(ns, next, &ctrl->namespaces, list) { - if (ns->head->ns_id > nsid) + if (ns->head->ns_id > nsid || test_bit(NVME_NS_DEAD, &ns->flags)) list_move_tail(&ns->list, &rm_list); } up_write(&ctrl->namespaces_rwsem); @@ -3542,19 +3554,9 @@ void nvme_kill_queues(struct nvme_ctrl *ctrl) if (ctrl->admin_q) blk_mq_unquiesce_queue(ctrl->admin_q); - list_for_each_entry(ns, &ctrl->namespaces, list) { - /* - * Revalidating a dead namespace sets capacity to 0. This will - * end buffered writers dirtying pages that can't be synced. - */ - if (!ns->disk || test_and_set_bit(NVME_NS_DEAD, &ns->flags)) - continue; - revalidate_disk(ns->disk); - blk_set_queue_dying(ns->queue); + list_for_each_entry(ns, &ctrl->namespaces, list) + nvme_set_queue_dying(ns); - /* Forcibly unquiesce queues to avoid blocking dispatch */ - blk_mq_unquiesce_queue(ns->queue); - } up_read(&ctrl->namespaces_rwsem); } EXPORT_SYMBOL_GPL(nvme_kill_queues); -- cgit v1.2.3 From fa441b71aa27d06fa79d5e7f7c329981dccd94d1 Mon Sep 17 00:00:00 2001 From: Weiping Zhang Date: Tue, 3 Jul 2018 00:34:38 +0800 Subject: nvme: don't enable AEN if not supported Avoid excuting set_feature command if there is no supported bit in Optional Asynchronous Events Supported (OAES). Fixes: c0561f82 ("nvme: submit AEN event configuration on startup") Reviewed-by: Sagi Grimberg Signed-off-by: Weiping Zhang Signed-off-by: Christoph Hellwig --- drivers/nvme/host/core.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index e7668c4bb4dd..57f33733237f 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -1060,14 +1060,17 @@ EXPORT_SYMBOL_GPL(nvme_set_queue_count); static void nvme_enable_aen(struct nvme_ctrl *ctrl) { - u32 result; + u32 result, supported_aens = ctrl->oaes & NVME_AEN_SUPPORTED; int status; - status = nvme_set_features(ctrl, NVME_FEAT_ASYNC_EVENT, - ctrl->oaes & NVME_AEN_SUPPORTED, NULL, 0, &result); + if (!supported_aens) + return; + + status = nvme_set_features(ctrl, NVME_FEAT_ASYNC_EVENT, supported_aens, + NULL, 0, &result); if (status) dev_warn(ctrl->device, "Failed to configure AEN (cfg %x)\n", - ctrl->oaes & NVME_AEN_SUPPORTED); + supported_aens); } static int nvme_submit_io(struct nvme_ns *ns, struct nvme_user_io __user *uio) -- cgit v1.2.3 From fbdb328c6bae0a7c78d75734a738b66b86dffc96 Mon Sep 17 00:00:00 2001 From: Dewet Thibaut Date: Mon, 16 Jul 2018 10:49:27 +0200 Subject: x86/MCE: Remove min interval polling limitation commit b3b7c4795c ("x86/MCE: Serialize sysfs changes") introduced a min interval limitation when setting the check interval for polled MCEs. However, the logic is that 0 disables polling for corrected MCEs, see Documentation/x86/x86_64/machinecheck. The limitation prevents disabling. Remove this limitation and allow the value 0 to disable polling again. Fixes: b3b7c4795c ("x86/MCE: Serialize sysfs changes") Signed-off-by: Dewet Thibaut Signed-off-by: Alexander Sverdlin [ Massage commit message. ] Signed-off-by: Borislav Petkov Signed-off-by: Thomas Gleixner Cc: Tony Luck Cc: linux-edac Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20180716084927.24869-1-alexander.sverdlin@nokia.com --- arch/x86/kernel/cpu/mcheck/mce.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index c102ad51025e..8c50754c09c1 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -2165,9 +2165,6 @@ static ssize_t store_int_with_restart(struct device *s, if (check_interval == old_check_interval) return ret; - if (check_interval < 1) - check_interval = 1; - mutex_lock(&mce_sysfs_mutex); mce_restart(); mutex_unlock(&mce_sysfs_mutex); -- cgit v1.2.3 From 3c53776e29f81719efcf8f7a6e30cdf753bee94d Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 8 Jan 2018 11:51:04 -0800 Subject: Mark HI and TASKLET softirq synchronous Way back in 4.9, we committed 4cd13c21b207 ("softirq: Let ksoftirqd do its job"), and ever since we've had small nagging issues with it. For example, we've had: 1ff688209e2e ("watchdog: core: make sure the watchdog_worker is not deferred") 8d5755b3f77b ("watchdog: softdog: fire watchdog even if softirqs do not get to run") 217f69743681 ("net: busy-poll: allow preemption in sk_busy_loop()") all of which worked around some of the effects of that commit. The DVB people have also complained that the commit causes excessive USB URB latencies, which seems to be due to the USB code using tasklets to schedule USB traffic. This seems to be an issue mainly when already living on the edge, but waiting for ksoftirqd to handle it really does seem to cause excessive latencies. Now Hanna Hawa reports that this issue isn't just limited to USB URB and DVB, but also causes timeout problems for the Marvell SoC team: "I'm facing kernel panic issue while running raid 5 on sata disks connected to Macchiatobin (Marvell community board with Armada-8040 SoC with 4 ARMv8 cores of CA72) Raid 5 built with Marvell DMA engine and async_tx mechanism (ASYNC_TX_DMA [=y]); the DMA driver (mv_xor_v2) uses a tasklet to clean the done descriptors from the queue" The latency problem causes a panic: mv_xor_v2 f0400000.xor: dma_sync_wait: timeout! Kernel panic - not syncing: async_tx_quiesce: DMA error waiting for transaction We've discussed simply just reverting the original commit entirely, and also much more involved solutions (with per-softirq threads etc). This patch is intentionally stupid and fairly limited, because the issue still remains, and the other solutions either got sidetracked or had other issues. We should probably also consider the timer softirqs to be synchronous and not be delayed to ksoftirqd (since they were the issue with the earlier watchdog problems), but that should be done as a separate patch. This does only the tasklet cases. Reported-and-tested-by: Hanna Hawa Reported-and-tested-by: Josef Griebichler Reported-by: Mauro Carvalho Chehab Cc: Alan Stern Cc: Greg Kroah-Hartman Cc: Eric Dumazet Cc: Ingo Molnar Signed-off-by: Linus Torvalds --- kernel/softirq.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/kernel/softirq.c b/kernel/softirq.c index 900dcfee542c..75ffc1d1a2e0 100644 --- a/kernel/softirq.c +++ b/kernel/softirq.c @@ -79,12 +79,16 @@ static void wakeup_softirqd(void) /* * If ksoftirqd is scheduled, we do not want to process pending softirqs - * right now. Let ksoftirqd handle this at its own rate, to get fairness. + * right now. Let ksoftirqd handle this at its own rate, to get fairness, + * unless we're doing some of the synchronous softirqs. */ -static bool ksoftirqd_running(void) +#define SOFTIRQ_NOW_MASK ((1 << HI_SOFTIRQ) | (1 << TASKLET_SOFTIRQ)) +static bool ksoftirqd_running(unsigned long pending) { struct task_struct *tsk = __this_cpu_read(ksoftirqd); + if (pending & SOFTIRQ_NOW_MASK) + return false; return tsk && (tsk->state == TASK_RUNNING); } @@ -328,7 +332,7 @@ asmlinkage __visible void do_softirq(void) pending = local_softirq_pending(); - if (pending && !ksoftirqd_running()) + if (pending && !ksoftirqd_running(pending)) do_softirq_own_stack(); local_irq_restore(flags); @@ -355,7 +359,7 @@ void irq_enter(void) static inline void invoke_softirq(void) { - if (ksoftirqd_running()) + if (ksoftirqd_running(local_softirq_pending())) return; if (!force_irqthreads) { -- cgit v1.2.3 From 26b2f552525cf98fad08515bd6faa427f2f22038 Mon Sep 17 00:00:00 2001 From: Taehee Yoo Date: Fri, 13 Jul 2018 01:38:08 +0900 Subject: netfilter: nf_tables: fix jumpstack depth validation The level of struct nft_ctx is updated by nf_tables_check_loops(). That is used to validate jumpstack depth. But jumpstack validation routine doesn't update and validate recursively. So, in some cases, chain depth can be bigger than the NFT_JUMP_STACK_SIZE. After this patch, The jumpstack validation routine is located in the nft_chain_validate(). When new rules or new set elements are added, the nft_table_validate() is called by the nf_tables_newrule and the nf_tables_newsetelem. The nft_table_validate() calls the nft_chain_validate() that visit all their children chains recursively. So it can update depth of chain certainly. Reproducer: %cat ./test.sh #!/bin/bash nft add table ip filter nft add chain ip filter input { type filter hook input priority 0\; } for ((i=0;i<20;i++)); do nft add chain ip filter a$i done nft add rule ip filter input jump a1 for ((i=0;i<10;i++)); do nft add rule ip filter a$i jump a$((i+1)) done for ((i=11;i<19;i++)); do nft add rule ip filter a$i jump a$((i+1)) done nft add rule ip filter a10 jump a11 Result: [ 253.931782] WARNING: CPU: 1 PID: 0 at net/netfilter/nf_tables_core.c:186 nft_do_chain+0xacc/0xdf0 [nf_tables] [ 253.931915] Modules linked in: nf_tables nfnetlink ip_tables x_tables [ 253.932153] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.18.0-rc3+ #48 [ 253.932153] RIP: 0010:nft_do_chain+0xacc/0xdf0 [nf_tables] [ 253.932153] Code: 83 f8 fb 0f 84 c7 00 00 00 e9 d0 00 00 00 83 f8 fd 74 0e 83 f8 ff 0f 84 b4 00 00 00 e9 bd 00 00 00 83 bd 64 fd ff ff 0f 76 09 <0f> 0b 31 c0 e9 bc 02 00 00 44 8b ad 64 fd [ 253.933807] RSP: 0018:ffff88011b807570 EFLAGS: 00010212 [ 253.933807] RAX: 00000000fffffffd RBX: ffff88011b807660 RCX: 0000000000000000 [ 253.933807] RDX: 0000000000000010 RSI: ffff880112b39d78 RDI: ffff88011b807670 [ 253.933807] RBP: ffff88011b807850 R08: ffffed0023700ece R09: ffffed0023700ecd [ 253.933807] R10: ffff88011b80766f R11: ffffed0023700ece R12: ffff88011b807898 [ 253.933807] R13: ffff880112b39d80 R14: ffff880112b39d60 R15: dffffc0000000000 [ 253.933807] FS: 0000000000000000(0000) GS:ffff88011b800000(0000) knlGS:0000000000000000 [ 253.933807] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 253.933807] CR2: 00000000014f1008 CR3: 000000006b216000 CR4: 00000000001006e0 [ 253.933807] Call Trace: [ 253.933807] [ 253.933807] ? sched_clock_cpu+0x132/0x170 [ 253.933807] ? __nft_trace_packet+0x180/0x180 [nf_tables] [ 253.933807] ? sched_clock_cpu+0x132/0x170 [ 253.933807] ? debug_show_all_locks+0x290/0x290 [ 253.933807] ? __lock_acquire+0x4835/0x4af0 [ 253.933807] ? inet_ehash_locks_alloc+0x1a0/0x1a0 [ 253.933807] ? unwind_next_frame+0x159e/0x1840 [ 253.933807] ? __read_once_size_nocheck.constprop.4+0x5/0x10 [ 253.933807] ? nft_do_chain_ipv4+0x197/0x1e0 [nf_tables] [ 253.933807] ? nft_do_chain+0x5/0xdf0 [nf_tables] [ 253.933807] nft_do_chain_ipv4+0x197/0x1e0 [nf_tables] [ 253.933807] ? nft_do_chain_arp+0xb0/0xb0 [nf_tables] [ 253.933807] ? __lock_is_held+0x9d/0x130 [ 253.933807] nf_hook_slow+0xc4/0x150 [ 253.933807] ip_local_deliver+0x28b/0x380 [ 253.933807] ? ip_call_ra_chain+0x3e0/0x3e0 [ 253.933807] ? ip_rcv_finish+0x1610/0x1610 [ 253.933807] ip_rcv+0xbcc/0xcc0 [ 253.933807] ? debug_show_all_locks+0x290/0x290 [ 253.933807] ? ip_local_deliver+0x380/0x380 [ 253.933807] ? __lock_is_held+0x9d/0x130 [ 253.933807] ? ip_local_deliver+0x380/0x380 [ 253.933807] __netif_receive_skb_core+0x1c9c/0x2240 Signed-off-by: Taehee Yoo Signed-off-by: Pablo Neira Ayuso --- include/net/netfilter/nf_tables.h | 4 ++-- net/netfilter/nf_tables_api.c | 11 ++++------- net/netfilter/nft_immediate.c | 3 +++ net/netfilter/nft_lookup.c | 13 +++++++++++-- 4 files changed, 20 insertions(+), 11 deletions(-) diff --git a/include/net/netfilter/nf_tables.h b/include/net/netfilter/nf_tables.h index 08c005ce56e9..4e82a4c49912 100644 --- a/include/net/netfilter/nf_tables.h +++ b/include/net/netfilter/nf_tables.h @@ -150,6 +150,7 @@ static inline void nft_data_debug(const struct nft_data *data) * @portid: netlink portID of the original message * @seq: netlink sequence number * @family: protocol family + * @level: depth of the chains * @report: notify via unicast netlink message */ struct nft_ctx { @@ -160,6 +161,7 @@ struct nft_ctx { u32 portid; u32 seq; u8 family; + u8 level; bool report; }; @@ -865,7 +867,6 @@ enum nft_chain_flags { * @table: table that this chain belongs to * @handle: chain handle * @use: number of jump references to this chain - * @level: length of longest path to this chain * @flags: bitmask of enum nft_chain_flags * @name: name of the chain */ @@ -878,7 +879,6 @@ struct nft_chain { struct nft_table *table; u64 handle; u32 use; - u16 level; u8 flags:6, genmask:2; char *name; diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 896d4a36081d..d41fa2c82f14 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -75,6 +75,7 @@ static void nft_ctx_init(struct nft_ctx *ctx, { ctx->net = net; ctx->family = family; + ctx->level = 0; ctx->table = table; ctx->chain = chain; ctx->nla = nla; @@ -2384,6 +2385,9 @@ int nft_chain_validate(const struct nft_ctx *ctx, const struct nft_chain *chain) struct nft_rule *rule; int err; + if (ctx->level == NFT_JUMP_STACK_SIZE) + return -EMLINK; + list_for_each_entry(rule, &chain->rules, list) { if (!nft_is_active_next(ctx->net, rule)) continue; @@ -6837,13 +6841,6 @@ int nft_validate_register_store(const struct nft_ctx *ctx, err = nf_tables_check_loops(ctx, data->verdict.chain); if (err < 0) return err; - - if (ctx->chain->level + 1 > - data->verdict.chain->level) { - if (ctx->chain->level + 1 == NFT_JUMP_STACK_SIZE) - return -EMLINK; - data->verdict.chain->level = ctx->chain->level + 1; - } } return 0; diff --git a/net/netfilter/nft_immediate.c b/net/netfilter/nft_immediate.c index 15adf8ca82c3..0777a93211e2 100644 --- a/net/netfilter/nft_immediate.c +++ b/net/netfilter/nft_immediate.c @@ -98,6 +98,7 @@ static int nft_immediate_validate(const struct nft_ctx *ctx, const struct nft_data **d) { const struct nft_immediate_expr *priv = nft_expr_priv(expr); + struct nft_ctx *pctx = (struct nft_ctx *)ctx; const struct nft_data *data; int err; @@ -109,9 +110,11 @@ static int nft_immediate_validate(const struct nft_ctx *ctx, switch (data->verdict.code) { case NFT_JUMP: case NFT_GOTO: + pctx->level++; err = nft_chain_validate(ctx, data->verdict.chain); if (err < 0) return err; + pctx->level--; break; default: break; diff --git a/net/netfilter/nft_lookup.c b/net/netfilter/nft_lookup.c index 42e6fadf1417..c2a1d84cdfc4 100644 --- a/net/netfilter/nft_lookup.c +++ b/net/netfilter/nft_lookup.c @@ -155,7 +155,9 @@ static int nft_lookup_validate_setelem(const struct nft_ctx *ctx, struct nft_set_elem *elem) { const struct nft_set_ext *ext = nft_set_elem_ext(set, elem->priv); + struct nft_ctx *pctx = (struct nft_ctx *)ctx; const struct nft_data *data; + int err; if (nft_set_ext_exists(ext, NFT_SET_EXT_FLAGS) && *nft_set_ext_flags(ext) & NFT_SET_ELEM_INTERVAL_END) @@ -165,10 +167,17 @@ static int nft_lookup_validate_setelem(const struct nft_ctx *ctx, switch (data->verdict.code) { case NFT_JUMP: case NFT_GOTO: - return nft_chain_validate(ctx, data->verdict.chain); + pctx->level++; + err = nft_chain_validate(ctx, data->verdict.chain); + if (err < 0) + return err; + pctx->level--; + break; default: - return 0; + break; } + + return 0; } static int nft_lookup_validate(const struct nft_ctx *ctx, -- cgit v1.2.3 From 96a5d8d4915f3e241ebb48d5decdd110ab9c7dcf Mon Sep 17 00:00:00 2001 From: Leo Liu Date: Fri, 13 Jul 2018 11:26:28 -0400 Subject: drm/amdgpu: Make sure IB tests flushed after IP resume MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fixes: 2c773de2 (drm/amdgpu: defer test IBs on the rings at boot (V3)) Signed-off-by: Leo Liu Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index 6e5284e6c028..2c5f093e79e3 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -2747,6 +2747,9 @@ int amdgpu_device_resume(struct drm_device *dev, bool resume, bool fbcon) if (r) return r; + /* Make sure IB tests flushed */ + flush_delayed_work(&adev->late_init_work); + /* blat the mode back in */ if (fbcon) { if (!amdgpu_device_has_dc_support(adev)) { -- cgit v1.2.3 From 263318eea710a6dd9770f9b4f570889b5dfd0d39 Mon Sep 17 00:00:00 2001 From: Hersen Wu Date: Mon, 16 Jul 2018 11:21:12 -0400 Subject: drm/amd/display: Fix DP HBR2 Eye Diagram Pattern on Carrizo [why] dp hbr2 eye diagram pattern for raven asic is not stabled. workaround is to use tp4 pattern. But this should not be applied to asic before raven. [how] add new bool varilable in asic caps. for raven asic, use the workaround. for carrizo, vega, do not use workaround. Signed-off-by: Hersen Wu Reviewed-by: Harry Wentland Acked-by: Leo Li Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 8 +++----- drivers/gpu/drm/amd/display/dc/dc.h | 1 + drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c | 2 ++ 3 files changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c index 7857cb42b3e6..bdd121485cbc 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c @@ -1767,12 +1767,10 @@ static void dp_test_send_link_training(struct dc_link *link) dp_retrain_link_dp_test(link, &link_settings, false); } -/* TODO hbr2 compliance eye output is unstable +/* TODO Raven hbr2 compliance eye output is unstable * (toggling on and off) with debugger break * This caueses intermittent PHY automation failure * Need to look into the root cause */ -static uint8_t force_tps4_for_cp2520 = 1; - static void dp_test_send_phy_test_pattern(struct dc_link *link) { union phy_test_pattern dpcd_test_pattern; @@ -1832,13 +1830,13 @@ static void dp_test_send_phy_test_pattern(struct dc_link *link) break; case PHY_TEST_PATTERN_CP2520_1: /* CP2520 pattern is unstable, temporarily use TPS4 instead */ - test_pattern = (force_tps4_for_cp2520 == 1) ? + test_pattern = (link->dc->caps.force_dp_tps4_for_cp2520 == 1) ? DP_TEST_PATTERN_TRAINING_PATTERN4 : DP_TEST_PATTERN_HBR2_COMPLIANCE_EYE; break; case PHY_TEST_PATTERN_CP2520_2: /* CP2520 pattern is unstable, temporarily use TPS4 instead */ - test_pattern = (force_tps4_for_cp2520 == 1) ? + test_pattern = (link->dc->caps.force_dp_tps4_for_cp2520 == 1) ? DP_TEST_PATTERN_TRAINING_PATTERN4 : DP_TEST_PATTERN_HBR2_COMPLIANCE_EYE; break; diff --git a/drivers/gpu/drm/amd/display/dc/dc.h b/drivers/gpu/drm/amd/display/dc/dc.h index 9cfde0ccf4e9..53c71296f3dd 100644 --- a/drivers/gpu/drm/amd/display/dc/dc.h +++ b/drivers/gpu/drm/amd/display/dc/dc.h @@ -76,6 +76,7 @@ struct dc_caps { bool is_apu; bool dual_link_dvi; bool post_blend_color_processing; + bool force_dp_tps4_for_cp2520; }; struct dc_dcc_surface_param { diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c index df5cb2d1d164..34dac84066a0 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c +++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c @@ -1027,6 +1027,8 @@ static bool construct( dc->caps.max_slave_planes = 1; dc->caps.is_apu = true; dc->caps.post_blend_color_processing = false; + /* Raven DP PHY HBR2 eye diagram pattern is not stable. Use TP4 */ + dc->caps.force_dp_tps4_for_cp2520 = true; if (dc->ctx->dce_environment == DCE_ENV_PRODUCTION_DRV) dc->debug = debug_defaults_drv; -- cgit v1.2.3 From 32e7024eab4c703b2f2fb362380c93be8f1949e3 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Tue, 17 Jul 2018 20:06:47 -0400 Subject: tools/power turbostat: Update turbostat(8) RAPL throttling column description Explain that this column may increment for some throttling causes, and may not increment for others. Signed-off-by: Len Brown --- tools/power/x86/turbostat/turbostat.8 | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.8 b/tools/power/x86/turbostat/turbostat.8 index d39e4ff7d0bf..a6db83a88e85 100644 --- a/tools/power/x86/turbostat/turbostat.8 +++ b/tools/power/x86/turbostat/turbostat.8 @@ -106,7 +106,7 @@ The system configuration dump (if --quiet is not used) is followed by statistics \fBC1%, C2%, C3%\fP The residency percentage that Linux requested C1, C2, C3.... The system summary is the average of all CPUs in the system. Note that these are software, reflecting what was requested. The hardware counters reflect what was actually achieved. \fBCPU%c1, CPU%c3, CPU%c6, CPU%c7\fP show the percentage residency in hardware core idle states. These numbers are from hardware residency counters. \fBCoreTmp\fP Degrees Celsius reported by the per-core Digital Thermal Sensor. -\fBPkgTtmp\fP Degrees Celsius reported by the per-package Package Thermal Monitor. +\fBPkgTmp\fP Degrees Celsius reported by the per-package Package Thermal Monitor. \fBGFX%rc6\fP The percentage of time the GPU is in the "render C6" state, rc6, during the measurement interval. From /sys/class/drm/card0/power/rc6_residency_ms. \fBGFXMHz\fP Instantaneous snapshot of what sysfs presents at the end of the measurement interval. From /sys/class/graphics/fb0/device/drm/card0/gt_cur_freq_mhz. \fBPkg%pc2, Pkg%pc3, Pkg%pc6, Pkg%pc7\fP percentage residency in hardware package idle states. These numbers are from hardware residency counters. @@ -114,7 +114,7 @@ The system configuration dump (if --quiet is not used) is followed by statistics \fBCorWatt\fP Watts consumed by the core part of the package. \fBGFXWatt\fP Watts consumed by the Graphics part of the package -- available only on client processors. \fBRAMWatt\fP Watts consumed by the DRAM DIMMS -- available only on server processors. -\fBPKG_%\fP percent of the interval that RAPL throttling was active on the Package. +\fBPKG_%\fP percent of the interval that RAPL throttling was active on the Package. Note that the system summary is the sum of the package throttling time, and thus may be higher than 100% on a multi-package system. Note that the meaning of this field is model specific. For example, some hardware increments this counter when RAPL responds to thermal limits, but does not increment this counter when RAPL responds to power limits. Comparing PkgWatt and PkgTmp to system limits is necessary. \fBRAM_%\fP percent of the interval that RAPL throttling was active on DRAM. .fi .SH TOO MUCH INFORMATION EXAMPLE -- cgit v1.2.3 From 81e69df38e2911b642ec121dec319fad2a4782f3 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sat, 14 Jul 2018 23:55:57 -0400 Subject: random: mix rdrand with entropy sent in from userspace Fedora has integrated the jitter entropy daemon to work around slow boot problems, especially on VM's that don't support virtio-rng: https://bugzilla.redhat.com/show_bug.cgi?id=1572944 It's understandable why they did this, but the Jitter entropy daemon works fundamentally on the principle: "the CPU microarchitecture is **so** complicated and we can't figure it out, so it *must* be random". Yes, it uses statistical tests to "prove" it is secure, but AES_ENCRYPT(NSA_KEY, COUNTER++) will also pass statistical tests with flying colors. So if RDRAND is available, mix it into entropy submitted from userspace. It can't hurt, and if you believe the NSA has backdoored RDRAND, then they probably have enough details about the Intel microarchitecture that they can reverse engineer how the Jitter entropy daemon affects the microarchitecture, and attack its output stream. And if RDRAND is in fact an honest DRNG, it will immeasurably improve on what the Jitter entropy daemon might produce. This also provides some protection against someone who is able to read or set the entropy seed file. Signed-off-by: Theodore Ts'o Cc: stable@vger.kernel.org Cc: Arnd Bergmann --- drivers/char/random.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/char/random.c b/drivers/char/random.c index cd888d4ee605..bd449ad52442 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -1895,14 +1895,22 @@ static int write_pool(struct entropy_store *r, const char __user *buffer, size_t count) { size_t bytes; - __u32 buf[16]; + __u32 t, buf[16]; const char __user *p = buffer; while (count > 0) { + int b, i = 0; + bytes = min(count, sizeof(buf)); if (copy_from_user(&buf, p, bytes)) return -EFAULT; + for (b = bytes ; b > 0 ; b -= sizeof(__u32), i++) { + if (!arch_get_random_int(&t)) + break; + buf[i] ^= t; + } + count -= bytes; p += bytes; -- cgit v1.2.3 From 9ba546c01976a426292af99e682a557075d6c010 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 11 Jul 2018 15:48:46 +0200 Subject: aio: don't expose __aio_sigset in uapi glibc uses a different defintion of sigset_t than the kernel does, and the current version would pull in both. To fix this just do not expose the type at all - this somewhat mirrors pselect() where we do not even have a type for the magic sigmask argument, but just use pointer arithmetics. Fixes: 7a074e96 ("aio: implement io_pgetevents") Signed-off-by: Christoph Hellwig Reported-by: Adrian Reber Signed-off-by: Al Viro --- fs/aio.c | 5 +++++ include/linux/syscalls.h | 1 + include/uapi/linux/aio_abi.h | 6 ------ 3 files changed, 6 insertions(+), 6 deletions(-) diff --git a/fs/aio.c b/fs/aio.c index e1d20124ec0e..b1a42e45698b 100644 --- a/fs/aio.c +++ b/fs/aio.c @@ -2042,6 +2042,11 @@ SYSCALL_DEFINE5(io_getevents, aio_context_t, ctx_id, return ret; } +struct __aio_sigset { + const sigset_t __user *sigmask; + size_t sigsetsize; +}; + SYSCALL_DEFINE6(io_pgetevents, aio_context_t, ctx_id, long, min_nr, diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index 73810808cdf2..b06b5eeda8e8 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -11,6 +11,7 @@ #ifndef _LINUX_SYSCALLS_H #define _LINUX_SYSCALLS_H +struct __aio_sigset; struct epoll_event; struct iattr; struct inode; diff --git a/include/uapi/linux/aio_abi.h b/include/uapi/linux/aio_abi.h index d00221345c19..ce43d340f010 100644 --- a/include/uapi/linux/aio_abi.h +++ b/include/uapi/linux/aio_abi.h @@ -29,7 +29,6 @@ #include #include -#include #include typedef __kernel_ulong_t aio_context_t; @@ -108,10 +107,5 @@ struct iocb { #undef IFBIG #undef IFLITTLE -struct __aio_sigset { - const sigset_t __user *sigmask; - size_t sigsetsize; -}; - #endif /* __LINUX__AIO_ABI_H */ -- cgit v1.2.3 From 4aac0b43474d18f6160302a3caa147d77fa3baa1 Mon Sep 17 00:00:00 2001 From: Alexander Sverdlin Date: Fri, 13 Jul 2018 17:31:50 +0200 Subject: octeon_mgmt: Fix MIX registers configuration on MTU setup octeon_mgmt driver doesn't drop RX frames that are 1-4 bytes bigger than MTU set for the corresponding interface. The problem is in the AGL_GMX_RX0/1_FRM_MAX register setting, which should not account for VLAN tagging. According to Octeon HW manual: "For tagged frames, MAX increases by four bytes for each VLAN found up to a maximum of two VLANs, or MAX + 8 bytes." OCTEON_FRAME_HEADER_LEN "define" is fine for ring buffer management, but should not be used for AGL_GMX_RX0/1_FRM_MAX. The problem could be easily reproduced using "ping" command. If affected system has default MTU 1500, other host (having MTU >= 1504) can successfully "ping" the affected system with payload size 1473-1476, resulting in IP packets of size 1501-1504 accepted by the mgmt driver. Fixed system still accepts IP packets of 1500 bytes even with VLAN tagging, because the limits are lifted in HW as expected, for every VLAN tag. Signed-off-by: Alexander Sverdlin Signed-off-by: David S. Miller --- drivers/net/ethernet/cavium/octeon/octeon_mgmt.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/cavium/octeon/octeon_mgmt.c b/drivers/net/ethernet/cavium/octeon/octeon_mgmt.c index 3f6afb54a5eb..bb43ddb7539e 100644 --- a/drivers/net/ethernet/cavium/octeon/octeon_mgmt.c +++ b/drivers/net/ethernet/cavium/octeon/octeon_mgmt.c @@ -643,13 +643,21 @@ static int octeon_mgmt_set_mac_address(struct net_device *netdev, void *addr) static int octeon_mgmt_change_mtu(struct net_device *netdev, int new_mtu) { struct octeon_mgmt *p = netdev_priv(netdev); - int size_without_fcs = new_mtu + OCTEON_MGMT_RX_HEADROOM; + int max_packet = new_mtu + ETH_HLEN + ETH_FCS_LEN; netdev->mtu = new_mtu; - cvmx_write_csr(p->agl + AGL_GMX_RX_FRM_MAX, size_without_fcs); + /* HW lifts the limit if the frame is VLAN tagged + * (+4 bytes per each tag, up to two tags) + */ + cvmx_write_csr(p->agl + AGL_GMX_RX_FRM_MAX, max_packet); + /* Set the hardware to truncate packets larger than the MTU. The jabber + * register must be set to a multiple of 8 bytes, so round up. JABBER is + * an unconditional limit, so we need to account for two possible VLAN + * tags. + */ cvmx_write_csr(p->agl + AGL_GMX_RX_JABBER, - (size_without_fcs + 7) & 0xfff8); + (max_packet + 7 + VLAN_HLEN * 2) & 0xfff8); return 0; } -- cgit v1.2.3 From 3a9b0455062ffb9d2f6cd4473a76e3456f318c9f Mon Sep 17 00:00:00 2001 From: David Lechner Date: Mon, 16 Jul 2018 17:58:10 -0500 Subject: net: usb: rtl8150: demote allmulti message to dev_dbg() This driver can spam the kernel log with multiple messages of: net eth0: eth0: allmulti set Usually 4 or 8 at a time (probably because of using ConnMan). This message doesn't seem useful, so let's demote it from dev_info() to dev_dbg(). Signed-off-by: David Lechner Signed-off-by: David S. Miller --- drivers/net/usb/rtl8150.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/usb/rtl8150.c b/drivers/net/usb/rtl8150.c index 5f565bd574da..48ba80a8ca5c 100644 --- a/drivers/net/usb/rtl8150.c +++ b/drivers/net/usb/rtl8150.c @@ -681,7 +681,7 @@ static void rtl8150_set_multicast(struct net_device *netdev) (netdev->flags & IFF_ALLMULTI)) { rx_creg &= 0xfffe; rx_creg |= 0x0002; - dev_info(&netdev->dev, "%s: allmulti set\n", netdev->name); + dev_dbg(&netdev->dev, "%s: allmulti set\n", netdev->name); } else { /* ~RX_MULTICAST, ~RX_PROMISCUOUS */ rx_creg &= 0x00fc; -- cgit v1.2.3 From 1463edca6734d42ab4406fa2896e20b45478ea36 Mon Sep 17 00:00:00 2001 From: Alexey Kardashevskiy Date: Tue, 17 Jul 2018 17:19:12 +1000 Subject: vfio/spapr: Use IOMMU pageshift rather than pagesize The size is always equal to 1 page so let's use this. Later on this will be used for other checks which use page shifts to check the granularity of access. This should cause no behavioral change. Cc: stable@vger.kernel.org # v4.12+ Reviewed-by: David Gibson Acked-by: Alex Williamson Signed-off-by: Alexey Kardashevskiy Signed-off-by: Michael Ellerman --- drivers/vfio/vfio_iommu_spapr_tce.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/vfio/vfio_iommu_spapr_tce.c b/drivers/vfio/vfio_iommu_spapr_tce.c index 759a5bdd40e1..2da5f054257a 100644 --- a/drivers/vfio/vfio_iommu_spapr_tce.c +++ b/drivers/vfio/vfio_iommu_spapr_tce.c @@ -457,13 +457,13 @@ static void tce_iommu_unuse_page(struct tce_container *container, } static int tce_iommu_prereg_ua_to_hpa(struct tce_container *container, - unsigned long tce, unsigned long size, + unsigned long tce, unsigned long shift, unsigned long *phpa, struct mm_iommu_table_group_mem_t **pmem) { long ret = 0; struct mm_iommu_table_group_mem_t *mem; - mem = mm_iommu_lookup(container->mm, tce, size); + mem = mm_iommu_lookup(container->mm, tce, 1ULL << shift); if (!mem) return -EINVAL; @@ -487,7 +487,7 @@ static void tce_iommu_unuse_page_v2(struct tce_container *container, if (!pua) return; - ret = tce_iommu_prereg_ua_to_hpa(container, *pua, IOMMU_PAGE_SIZE(tbl), + ret = tce_iommu_prereg_ua_to_hpa(container, *pua, tbl->it_page_shift, &hpa, &mem); if (ret) pr_debug("%s: tce %lx at #%lx was not cached, ret=%d\n", @@ -611,7 +611,7 @@ static long tce_iommu_build_v2(struct tce_container *container, entry + i); ret = tce_iommu_prereg_ua_to_hpa(container, - tce, IOMMU_PAGE_SIZE(tbl), &hpa, &mem); + tce, tbl->it_page_shift, &hpa, &mem); if (ret) break; -- cgit v1.2.3 From 76fa4975f3ed12d15762bc979ca44078598ed8ee Mon Sep 17 00:00:00 2001 From: Alexey Kardashevskiy Date: Tue, 17 Jul 2018 17:19:13 +1000 Subject: KVM: PPC: Check if IOMMU page is contained in the pinned physical page A VM which has: - a DMA capable device passed through to it (eg. network card); - running a malicious kernel that ignores H_PUT_TCE failure; - capability of using IOMMU pages bigger that physical pages can create an IOMMU mapping that exposes (for example) 16MB of the host physical memory to the device when only 64K was allocated to the VM. The remaining 16MB - 64K will be some other content of host memory, possibly including pages of the VM, but also pages of host kernel memory, host programs or other VMs. The attacking VM does not control the location of the page it can map, and is only allowed to map as many pages as it has pages of RAM. We already have a check in drivers/vfio/vfio_iommu_spapr_tce.c that an IOMMU page is contained in the physical page so the PCI hardware won't get access to unassigned host memory; however this check is missing in the KVM fastpath (H_PUT_TCE accelerated code). We were lucky so far and did not hit this yet as the very first time when the mapping happens we do not have tbl::it_userspace allocated yet and fall back to the userspace which in turn calls VFIO IOMMU driver, this fails and the guest does not retry, This stores the smallest preregistered page size in the preregistered region descriptor and changes the mm_iommu_xxx API to check this against the IOMMU page size. This calculates maximum page size as a minimum of the natural region alignment and compound page size. For the page shift this uses the shift returned by find_linux_pte() which indicates how the page is mapped to the current userspace - if the page is huge and this is not a zero, then it is a leaf pte and the page is mapped within the range. Fixes: 121f80ba68f1 ("KVM: PPC: VFIO: Add in-kernel acceleration for VFIO") Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Alexey Kardashevskiy Reviewed-by: David Gibson Signed-off-by: Michael Ellerman --- arch/powerpc/include/asm/mmu_context.h | 4 ++-- arch/powerpc/kvm/book3s_64_vio.c | 2 +- arch/powerpc/kvm/book3s_64_vio_hv.c | 6 ++++-- arch/powerpc/mm/mmu_context_iommu.c | 37 ++++++++++++++++++++++++++++++++-- drivers/vfio/vfio_iommu_spapr_tce.c | 2 +- 5 files changed, 43 insertions(+), 8 deletions(-) diff --git a/arch/powerpc/include/asm/mmu_context.h b/arch/powerpc/include/asm/mmu_context.h index 896efa559996..79d570cbf332 100644 --- a/arch/powerpc/include/asm/mmu_context.h +++ b/arch/powerpc/include/asm/mmu_context.h @@ -35,9 +35,9 @@ extern struct mm_iommu_table_group_mem_t *mm_iommu_lookup_rm( extern struct mm_iommu_table_group_mem_t *mm_iommu_find(struct mm_struct *mm, unsigned long ua, unsigned long entries); extern long mm_iommu_ua_to_hpa(struct mm_iommu_table_group_mem_t *mem, - unsigned long ua, unsigned long *hpa); + unsigned long ua, unsigned int pageshift, unsigned long *hpa); extern long mm_iommu_ua_to_hpa_rm(struct mm_iommu_table_group_mem_t *mem, - unsigned long ua, unsigned long *hpa); + unsigned long ua, unsigned int pageshift, unsigned long *hpa); extern long mm_iommu_mapped_inc(struct mm_iommu_table_group_mem_t *mem); extern void mm_iommu_mapped_dec(struct mm_iommu_table_group_mem_t *mem); #endif diff --git a/arch/powerpc/kvm/book3s_64_vio.c b/arch/powerpc/kvm/book3s_64_vio.c index d066e37551ec..8c456fa691a5 100644 --- a/arch/powerpc/kvm/book3s_64_vio.c +++ b/arch/powerpc/kvm/book3s_64_vio.c @@ -449,7 +449,7 @@ long kvmppc_tce_iommu_do_map(struct kvm *kvm, struct iommu_table *tbl, /* This only handles v2 IOMMU type, v1 is handled via ioctl() */ return H_TOO_HARD; - if (WARN_ON_ONCE(mm_iommu_ua_to_hpa(mem, ua, &hpa))) + if (WARN_ON_ONCE(mm_iommu_ua_to_hpa(mem, ua, tbl->it_page_shift, &hpa))) return H_HARDWARE; if (mm_iommu_mapped_inc(mem)) diff --git a/arch/powerpc/kvm/book3s_64_vio_hv.c b/arch/powerpc/kvm/book3s_64_vio_hv.c index 925fc316a104..5b298f5a1a14 100644 --- a/arch/powerpc/kvm/book3s_64_vio_hv.c +++ b/arch/powerpc/kvm/book3s_64_vio_hv.c @@ -279,7 +279,8 @@ static long kvmppc_rm_tce_iommu_do_map(struct kvm *kvm, struct iommu_table *tbl, if (!mem) return H_TOO_HARD; - if (WARN_ON_ONCE_RM(mm_iommu_ua_to_hpa_rm(mem, ua, &hpa))) + if (WARN_ON_ONCE_RM(mm_iommu_ua_to_hpa_rm(mem, ua, tbl->it_page_shift, + &hpa))) return H_HARDWARE; pua = (void *) vmalloc_to_phys(pua); @@ -469,7 +470,8 @@ long kvmppc_rm_h_put_tce_indirect(struct kvm_vcpu *vcpu, mem = mm_iommu_lookup_rm(vcpu->kvm->mm, ua, IOMMU_PAGE_SIZE_4K); if (mem) - prereg = mm_iommu_ua_to_hpa_rm(mem, ua, &tces) == 0; + prereg = mm_iommu_ua_to_hpa_rm(mem, ua, + IOMMU_PAGE_SHIFT_4K, &tces) == 0; } if (!prereg) { diff --git a/arch/powerpc/mm/mmu_context_iommu.c b/arch/powerpc/mm/mmu_context_iommu.c index abb43646927a..a4ca57612558 100644 --- a/arch/powerpc/mm/mmu_context_iommu.c +++ b/arch/powerpc/mm/mmu_context_iommu.c @@ -19,6 +19,7 @@ #include #include #include +#include static DEFINE_MUTEX(mem_list_mutex); @@ -27,6 +28,7 @@ struct mm_iommu_table_group_mem_t { struct rcu_head rcu; unsigned long used; atomic64_t mapped; + unsigned int pageshift; u64 ua; /* userspace address */ u64 entries; /* number of entries in hpas[] */ u64 *hpas; /* vmalloc'ed */ @@ -125,6 +127,8 @@ long mm_iommu_get(struct mm_struct *mm, unsigned long ua, unsigned long entries, { struct mm_iommu_table_group_mem_t *mem; long i, j, ret = 0, locked_entries = 0; + unsigned int pageshift; + unsigned long flags; struct page *page = NULL; mutex_lock(&mem_list_mutex); @@ -159,6 +163,12 @@ long mm_iommu_get(struct mm_struct *mm, unsigned long ua, unsigned long entries, goto unlock_exit; } + /* + * For a starting point for a maximum page size calculation + * we use @ua and @entries natural alignment to allow IOMMU pages + * smaller than huge pages but still bigger than PAGE_SIZE. + */ + mem->pageshift = __ffs(ua | (entries << PAGE_SHIFT)); mem->hpas = vzalloc(array_size(entries, sizeof(mem->hpas[0]))); if (!mem->hpas) { kfree(mem); @@ -199,6 +209,23 @@ long mm_iommu_get(struct mm_struct *mm, unsigned long ua, unsigned long entries, } } populate: + pageshift = PAGE_SHIFT; + if (PageCompound(page)) { + pte_t *pte; + struct page *head = compound_head(page); + unsigned int compshift = compound_order(head); + + local_irq_save(flags); /* disables as well */ + pte = find_linux_pte(mm->pgd, ua, NULL, &pageshift); + local_irq_restore(flags); + + /* Double check it is still the same pinned page */ + if (pte && pte_page(*pte) == head && + pageshift == compshift) + pageshift = max_t(unsigned int, pageshift, + PAGE_SHIFT); + } + mem->pageshift = min(mem->pageshift, pageshift); mem->hpas[i] = page_to_pfn(page) << PAGE_SHIFT; } @@ -349,7 +376,7 @@ struct mm_iommu_table_group_mem_t *mm_iommu_find(struct mm_struct *mm, EXPORT_SYMBOL_GPL(mm_iommu_find); long mm_iommu_ua_to_hpa(struct mm_iommu_table_group_mem_t *mem, - unsigned long ua, unsigned long *hpa) + unsigned long ua, unsigned int pageshift, unsigned long *hpa) { const long entry = (ua - mem->ua) >> PAGE_SHIFT; u64 *va = &mem->hpas[entry]; @@ -357,6 +384,9 @@ long mm_iommu_ua_to_hpa(struct mm_iommu_table_group_mem_t *mem, if (entry >= mem->entries) return -EFAULT; + if (pageshift > mem->pageshift) + return -EFAULT; + *hpa = *va | (ua & ~PAGE_MASK); return 0; @@ -364,7 +394,7 @@ long mm_iommu_ua_to_hpa(struct mm_iommu_table_group_mem_t *mem, EXPORT_SYMBOL_GPL(mm_iommu_ua_to_hpa); long mm_iommu_ua_to_hpa_rm(struct mm_iommu_table_group_mem_t *mem, - unsigned long ua, unsigned long *hpa) + unsigned long ua, unsigned int pageshift, unsigned long *hpa) { const long entry = (ua - mem->ua) >> PAGE_SHIFT; void *va = &mem->hpas[entry]; @@ -373,6 +403,9 @@ long mm_iommu_ua_to_hpa_rm(struct mm_iommu_table_group_mem_t *mem, if (entry >= mem->entries) return -EFAULT; + if (pageshift > mem->pageshift) + return -EFAULT; + pa = (void *) vmalloc_to_phys(va); if (!pa) return -EFAULT; diff --git a/drivers/vfio/vfio_iommu_spapr_tce.c b/drivers/vfio/vfio_iommu_spapr_tce.c index 2da5f054257a..7cd63b0c1a46 100644 --- a/drivers/vfio/vfio_iommu_spapr_tce.c +++ b/drivers/vfio/vfio_iommu_spapr_tce.c @@ -467,7 +467,7 @@ static int tce_iommu_prereg_ua_to_hpa(struct tce_container *container, if (!mem) return -EINVAL; - ret = mm_iommu_ua_to_hpa(mem, tce, phpa); + ret = mm_iommu_ua_to_hpa(mem, tce, shift, phpa); if (ret) return -EINVAL; -- cgit v1.2.3 From b5020a8e6b54d2ece80b1e7dedb33c79a40ebd47 Mon Sep 17 00:00:00 2001 From: Lan Tianyu Date: Thu, 21 Dec 2017 21:10:36 -0500 Subject: KVM/Eventfd: Avoid crash when assign and deassign specific eventfd in parallel. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Syzbot reports crashes in kvm_irqfd_assign(), caused by use-after-free when kvm_irqfd_assign() and kvm_irqfd_deassign() run in parallel for one specific eventfd. When the assign path hasn't finished but irqfd has been added to kvm->irqfds.items list, another thead may deassign the eventfd and free struct kvm_kernel_irqfd(). The assign path then uses the struct kvm_kernel_irqfd that has been freed by deassign path. To avoid such issue, keep irqfd under kvm->irq_srcu protection after the irqfd has been added to kvm->irqfds.items list, and call synchronize_srcu() in irq_shutdown() to make sure that irqfd has been fully initialized in the assign path. Reported-by: Dmitry Vyukov Cc: Paolo Bonzini Cc: Radim Krčmář Cc: Dmitry Vyukov Signed-off-by: Tianyu Lan Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini --- virt/kvm/eventfd.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/virt/kvm/eventfd.c b/virt/kvm/eventfd.c index 6e865e8b5b10..decefe944b0f 100644 --- a/virt/kvm/eventfd.c +++ b/virt/kvm/eventfd.c @@ -119,8 +119,12 @@ irqfd_shutdown(struct work_struct *work) { struct kvm_kernel_irqfd *irqfd = container_of(work, struct kvm_kernel_irqfd, shutdown); + struct kvm *kvm = irqfd->kvm; u64 cnt; + /* Make sure irqfd has been initalized in assign path. */ + synchronize_srcu(&kvm->irq_srcu); + /* * Synchronize with the wait-queue and unhook ourselves to prevent * further events. @@ -387,7 +391,6 @@ kvm_irqfd_assign(struct kvm *kvm, struct kvm_irqfd *args) idx = srcu_read_lock(&kvm->irq_srcu); irqfd_update(kvm, irqfd); - srcu_read_unlock(&kvm->irq_srcu, idx); list_add_tail(&irqfd->list, &kvm->irqfds.items); @@ -421,6 +424,7 @@ kvm_irqfd_assign(struct kvm *kvm, struct kvm_irqfd *args) } #endif + srcu_read_unlock(&kvm->irq_srcu, idx); return 0; fail: -- cgit v1.2.3 From 9432a3175770e06cb83eada2d91fac90c977cb99 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Mon, 28 May 2018 13:31:13 +0200 Subject: KVM: irqfd: fix race between EPOLLHUP and irq_bypass_register_consumer A comment warning against this bug is there, but the code is not doing what the comment says. Therefore it is possible that an EPOLLHUP races against irq_bypass_register_consumer. The EPOLLHUP handler schedules irqfd_shutdown, and if that runs soon enough, you get a use-after-free. Reported-by: syzbot Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini Reviewed-by: David Hildenbrand --- virt/kvm/eventfd.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/virt/kvm/eventfd.c b/virt/kvm/eventfd.c index decefe944b0f..fe6eb0fe07f6 100644 --- a/virt/kvm/eventfd.c +++ b/virt/kvm/eventfd.c @@ -405,11 +405,6 @@ kvm_irqfd_assign(struct kvm *kvm, struct kvm_irqfd *args) if (events & EPOLLIN) schedule_work(&irqfd->inject); - /* - * do not drop the file until the irqfd is fully initialized, otherwise - * we might race against the EPOLLHUP - */ - fdput(f); #ifdef CONFIG_HAVE_KVM_IRQ_BYPASS if (kvm_arch_has_irq_bypass()) { irqfd->consumer.token = (void *)irqfd->eventfd; @@ -425,6 +420,12 @@ kvm_irqfd_assign(struct kvm *kvm, struct kvm_irqfd *args) #endif srcu_read_unlock(&kvm->irq_srcu, idx); + + /* + * do not drop the file until the irqfd is fully initialized, otherwise + * we might race against the EPOLLHUP + */ + fdput(f); return 0; fail: -- cgit v1.2.3 From 2307af1c4b2e0ad886f30e31739845322cbd328b Mon Sep 17 00:00:00 2001 From: Liran Alon Date: Fri, 29 Jun 2018 22:59:04 +0300 Subject: KVM: VMX: Mark VMXArea with revision_id of physical CPU even when eVMCS enabled When eVMCS is enabled, all VMCS allocated to be used by KVM are marked with revision_id of KVM_EVMCS_VERSION instead of revision_id reported by MSR_IA32_VMX_BASIC. However, even though not explictly documented by TLFS, VMXArea passed as VMXON argument should still be marked with revision_id reported by physical CPU. This issue was found by the following setup: * L0 = KVM which expose eVMCS to it's L1 guest. * L1 = KVM which consume eVMCS reported by L0. This setup caused the following to occur: 1) L1 execute hardware_enable(). 2) hardware_enable() calls kvm_cpu_vmxon() to execute VMXON. 3) L0 intercept L1 VMXON and execute handle_vmon() which notes vmxarea->revision_id != VMCS12_REVISION and therefore fails with nested_vmx_failInvalid() which sets RFLAGS.CF. 4) L1 kvm_cpu_vmxon() don't check RFLAGS.CF for failure and therefore hardware_enable() continues as usual. 5) L1 hardware_enable() then calls ept_sync_global() which executes INVEPT. 6) L0 intercept INVEPT and execute handle_invept() which notes !vmx->nested.vmxon and thus raise a #UD to L1. 7) Raised #UD caused L1 to panic. Reviewed-by: Krish Sadhukhan Cc: stable@vger.kernel.org Fixes: 773e8a0425c923bc02668a2d6534a5ef5a43cc69 Signed-off-by: Liran Alon Signed-off-by: Paolo Bonzini --- arch/x86/kvm/vmx.c | 27 +++++++++++++++++++++------ 1 file changed, 21 insertions(+), 6 deletions(-) diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index ba981459d706..c3c85908b8de 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -4108,11 +4108,7 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf) vmcs_conf->order = get_order(vmcs_conf->size); vmcs_conf->basic_cap = vmx_msr_high & ~0x1fff; - /* KVM supports Enlightened VMCS v1 only */ - if (static_branch_unlikely(&enable_evmcs)) - vmcs_conf->revision_id = KVM_EVMCS_VERSION; - else - vmcs_conf->revision_id = vmx_msr_low; + vmcs_conf->revision_id = vmx_msr_low; vmcs_conf->pin_based_exec_ctrl = _pin_based_exec_control; vmcs_conf->cpu_based_exec_ctrl = _cpu_based_exec_control; @@ -4182,7 +4178,13 @@ static struct vmcs *alloc_vmcs_cpu(int cpu) return NULL; vmcs = page_address(pages); memset(vmcs, 0, vmcs_config.size); - vmcs->revision_id = vmcs_config.revision_id; /* vmcs revision id */ + + /* KVM supports Enlightened VMCS v1 only */ + if (static_branch_unlikely(&enable_evmcs)) + vmcs->revision_id = KVM_EVMCS_VERSION; + else + vmcs->revision_id = vmcs_config.revision_id; + return vmcs; } @@ -4341,6 +4343,19 @@ static __init int alloc_kvm_area(void) return -ENOMEM; } + /* + * When eVMCS is enabled, alloc_vmcs_cpu() sets + * vmcs->revision_id to KVM_EVMCS_VERSION instead of + * revision_id reported by MSR_IA32_VMX_BASIC. + * + * However, even though not explictly documented by + * TLFS, VMXArea passed as VMXON argument should + * still be marked with revision_id reported by + * physical CPU. + */ + if (static_branch_unlikely(&enable_evmcs)) + vmcs->revision_id = vmcs_config.revision_id; + per_cpu(vmxarea, cpu) = vmcs; } return 0; -- cgit v1.2.3 From e10f7805032365cc11c739a97f226ebb48aee042 Mon Sep 17 00:00:00 2001 From: Peng Hao Date: Sat, 14 Jul 2018 23:28:29 +0800 Subject: kvmclock: fix TSC calibration for nested guests Inside a nested guest, access to hardware can be slow enough that tsc_read_refs always return ULLONG_MAX, causing tsc_refine_calibration_work to be called periodically and the nested guest to spend a lot of time reading the ACPI timer. However, if the TSC frequency is available from the pvclock page, we can just set X86_FEATURE_TSC_KNOWN_FREQ and avoid the recalibration. 'refine' operation. Suggested-by: Peter Zijlstra Signed-off-by: Peng Hao [Commit message rewritten. - Paolo] Signed-off-by: Paolo Bonzini --- arch/x86/kernel/kvmclock.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c index d79a18b4cf9d..4c53d12ca933 100644 --- a/arch/x86/kernel/kvmclock.c +++ b/arch/x86/kernel/kvmclock.c @@ -138,6 +138,7 @@ static unsigned long kvm_get_tsc_khz(void) src = &hv_clock[cpu].pvti; tsc_khz = pvclock_tsc_khz(src); put_cpu(); + setup_force_cpu_cap(X86_FEATURE_TSC_KNOWN_FREQ); return tsc_khz; } -- cgit v1.2.3 From 4e4a4b75ccce827f9b8b04b6ee5c90169df4b6ee Mon Sep 17 00:00:00 2001 From: James Clarke Date: Thu, 12 Jul 2018 22:41:49 +0100 Subject: powerpc/Makefile: Assemble with -me500 when building for E500 Some of the assembly files use instructions specific to BookE or E500, which are rejected with the now-default -mcpu=powerpc, so we must pass -me500 to the assembler just as we pass -me200 for E200. Fixes: 4bf4f42a2feb ("powerpc/kbuild: Set default generic machine type for 32-bit compile") Signed-off-by: James Clarke Signed-off-by: Michael Ellerman --- arch/powerpc/Makefile | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 2ea575cb3401..fb96206de317 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -243,6 +243,7 @@ endif cpu-as-$(CONFIG_4xx) += -Wa,-m405 cpu-as-$(CONFIG_ALTIVEC) += $(call as-option,-Wa$(comma)-maltivec) cpu-as-$(CONFIG_E200) += -Wa,-me200 +cpu-as-$(CONFIG_E500) += -Wa,-me500 cpu-as-$(CONFIG_PPC_BOOK3S_64) += -Wa,-mpower4 cpu-as-$(CONFIG_PPC_E500MC) += $(call as-option,-Wa$(comma)-me500mc) -- cgit v1.2.3 From b03897cf318dfc47de33a7ecbc7655584266f034 Mon Sep 17 00:00:00 2001 From: "Gautham R. Shenoy" Date: Wed, 18 Jul 2018 14:03:16 +0530 Subject: powerpc/powernv: Fix save/restore of SPRG3 on entry/exit from stop (idle) On 64-bit servers, SPRN_SPRG3 and its userspace read-only mirror SPRN_USPRG3 are used as userspace VDSO write and read registers respectively. SPRN_SPRG3 is lost when we enter stop4 and above, and is currently not restored. As a result, any read from SPRN_USPRG3 returns zero on an exit from stop4 (Power9 only) and above. Thus in this situation, on POWER9, any call from sched_getcpu() always returns zero, as on powerpc, we call __kernel_getcpu() which relies upon SPRN_USPRG3 to report the CPU and NUMA node information. Fix this by restoring SPRN_SPRG3 on wake up from a deep stop state with the sprg_vdso value that is cached in PACA. Fixes: e1c1cfed5432 ("powerpc/powernv: Save/Restore additional SPRs for stop4 cpuidle") Cc: stable@vger.kernel.org # v4.14+ Reported-by: Florian Weimer Signed-off-by: Gautham R. Shenoy Reviewed-by: Michael Ellerman Signed-off-by: Michael Ellerman --- arch/powerpc/kernel/idle_book3s.S | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/powerpc/kernel/idle_book3s.S b/arch/powerpc/kernel/idle_book3s.S index e734f6e45abc..689306118b48 100644 --- a/arch/powerpc/kernel/idle_book3s.S +++ b/arch/powerpc/kernel/idle_book3s.S @@ -144,7 +144,9 @@ power9_restore_additional_sprs: mtspr SPRN_MMCR1, r4 ld r3, STOP_MMCR2(r13) + ld r4, PACA_SPRG_VDSO(r13) mtspr SPRN_MMCR2, r3 + mtspr SPRN_SPRG3, r4 blr /* -- cgit v1.2.3 From 95d6c0857e54b788982746071130d822a795026b Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 18 Jul 2018 13:38:37 +0200 Subject: cpufreq: intel_pstate: Register when ACPI PCCH is present Currently, intel_pstate doesn't register if _PSS is not present on HP Proliant systems, because it expects the firmware to take over CPU performance scaling in that case. However, if ACPI PCCH is present, the firmware expects the kernel to use it for CPU performance scaling and the pcc-cpufreq driver is loaded for that. Unfortunately, the firmware interface used by that driver is not scalable for fundamental reasons, so pcc-cpufreq is way suboptimal on systems with more than just a few CPUs. In fact, it is better to avoid using it at all. For this reason, modify intel_pstate to look for ACPI PCCH if _PSS is not present and register if it is there. Also prevent the pcc-cpufreq driver from trying to initialize itself if intel_pstate has been registered already. Fixes: fbbcdc0744da (intel_pstate: skip the driver if ACPI has power mgmt option) Reported-by: Andreas Herrmann Reviewed-by: Andreas Herrmann Acked-by: Srinivas Pandruvada Tested-by: Andreas Herrmann Cc: 4.16+ # 4.16+ Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/intel_pstate.c | 17 ++++++++++++++++- drivers/cpufreq/pcc-cpufreq.c | 4 ++++ 2 files changed, 20 insertions(+), 1 deletion(-) diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index ece120da3353..3c3971256130 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -2394,6 +2394,18 @@ static bool __init intel_pstate_no_acpi_pss(void) return true; } +static bool __init intel_pstate_no_acpi_pcch(void) +{ + acpi_status status; + acpi_handle handle; + + status = acpi_get_handle(NULL, "\\_SB", &handle); + if (ACPI_FAILURE(status)) + return true; + + return !acpi_has_method(handle, "PCCH"); +} + static bool __init intel_pstate_has_acpi_ppc(void) { int i; @@ -2453,7 +2465,10 @@ static bool __init intel_pstate_platform_pwr_mgmt_exists(void) switch (plat_info[idx].data) { case PSS: - return intel_pstate_no_acpi_pss(); + if (!intel_pstate_no_acpi_pss()) + return false; + + return intel_pstate_no_acpi_pcch(); case PPC: return intel_pstate_has_acpi_ppc() && !force_load; } diff --git a/drivers/cpufreq/pcc-cpufreq.c b/drivers/cpufreq/pcc-cpufreq.c index 3f0ce2ae35ee..0c56c9759672 100644 --- a/drivers/cpufreq/pcc-cpufreq.c +++ b/drivers/cpufreq/pcc-cpufreq.c @@ -580,6 +580,10 @@ static int __init pcc_cpufreq_init(void) { int ret; + /* Skip initialization if another cpufreq driver is there. */ + if (cpufreq_get_current_driver()) + return 0; + if (acpi_disabled) return 0; -- cgit v1.2.3 From bb4b894addb09a069c072a0a032f644cc470d17f Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Fri, 13 Jul 2018 16:36:28 +0100 Subject: ASoC: core: add support to card re-bind using component framework This patch aims at achieving dynamic behaviour of audio card when the dependent components disappear and reappear. With this patch the card is removed if any of the dependent component is removed and card is added back if the dependent component comes back. All this is done using component framework and matching based on component name. Signed-off-by: Srinivas Kandagatla Reviewed-by: Vinod Koul Signed-off-by: Mark Brown --- include/sound/soc.h | 7 ++++++ sound/soc/soc-core.c | 62 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 69 insertions(+) diff --git a/include/sound/soc.h b/include/sound/soc.h index a4915148f739..a23ecdf3eff1 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -1090,6 +1091,12 @@ struct snd_soc_card { struct work_struct deferred_resume_work; + /* component framework related */ + bool components_added; + /* set in machine driver to enable/disable auto re-binding */ + bool auto_bind; + struct component_match *match; + /* lists of probed devices belonging to this card */ struct list_head component_dev_list; diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 3be0310d5c81..08e189485009 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -279,11 +279,28 @@ static inline void snd_soc_debugfs_exit(void) #endif +static int snd_soc_card_comp_compare(struct device *dev, void *data) +{ + struct snd_soc_component *component; + + lockdep_assert_held(&client_mutex); + list_for_each_entry(component, &component_list, list) { + if (dev == component->dev) { + if (!strcmp(component->name, data)) + return 1; + break; + } + } + + return 0; +} + static int snd_soc_rtdcom_add(struct snd_soc_pcm_runtime *rtd, struct snd_soc_component *component) { struct snd_soc_rtdcom_list *rtdcom; struct snd_soc_rtdcom_list *new_rtdcom; + char *cname; for_each_rtdcom(rtd, rtdcom) { /* already connected */ @@ -300,6 +317,13 @@ static int snd_soc_rtdcom_add(struct snd_soc_pcm_runtime *rtd, list_add_tail(&new_rtdcom->list, &rtd->component_list); + if (rtd->card->auto_bind && !rtd->card->components_added) { + cname = devm_kasprintf(rtd->card->dev, GFP_KERNEL, + "%s", component->name); + component_match_add(rtd->card->dev, &rtd->card->match, + snd_soc_card_comp_compare, cname); + } + return 0; } @@ -835,6 +859,25 @@ static bool soc_is_dai_link_bound(struct snd_soc_card *card, return false; } +static int snd_soc_card_comp_bind(struct device *dev) +{ + struct snd_soc_card *card = dev_get_drvdata(dev); + + if (card->instantiated) + return 0; + + return snd_soc_register_card(card); +} + +static void snd_soc_card_comp_unbind(struct device *dev) +{ +} + +static const struct component_master_ops snd_soc_card_comp_ops = { + .bind = snd_soc_card_comp_bind, + .unbind = snd_soc_card_comp_unbind, +}; + static int soc_bind_dai_link(struct snd_soc_card *card, struct snd_soc_dai_link *dai_link) { @@ -2126,6 +2169,12 @@ static int snd_soc_instantiate_card(struct snd_soc_card *card) card->instantiated = 1; snd_soc_dapm_sync(&card->dapm); + if (card->auto_bind && !card->components_added) { + component_master_add_with_match(card->dev, + &snd_soc_card_comp_ops, + card->match); + card->components_added = true; + } mutex_unlock(&card->mutex); mutex_unlock(&client_mutex); @@ -2749,6 +2798,9 @@ int snd_soc_unregister_card(struct snd_soc_card *card) dev_dbg(card->dev, "ASoC: Unregistered card '%s'\n", card->name); } + if (!card->auto_bind && card->components_added) + component_master_del(card->dev, &snd_soc_card_comp_ops); + return 0; } EXPORT_SYMBOL_GPL(snd_soc_unregister_card); @@ -3161,8 +3213,17 @@ int snd_soc_add_component(struct device *dev, snd_soc_component_add(component); + ret = component_add(dev, NULL); + if (ret < 0) { + dev_err(dev, "ASoC: Failed to add Component: %d\n", ret); + goto err_comp; + } + return 0; +err_comp: + soc_remove_component(component); + snd_soc_unregister_dais(component); err_cleanup: snd_soc_component_cleanup(component); err_free: @@ -3210,6 +3271,7 @@ static int __snd_soc_unregister_component(struct device *dev) mutex_unlock(&client_mutex); if (found) { + component_del(dev, NULL); snd_soc_component_cleanup(component); } -- cgit v1.2.3 From 605fcb69918528e1a448cba4d358cbd8ed532146 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Fri, 13 Jul 2018 16:36:29 +0100 Subject: ASoC: qdsp6: q6afe-dai: remove component fw related code Now that the component framework is integrated into the ASoC core, remove any redundant code in this driver. Signed-off-by: Srinivas Kandagatla Reviewed-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/qcom/qdsp6/q6afe-dai.c | 34 ++++------------------------------ 1 file changed, 4 insertions(+), 30 deletions(-) diff --git a/sound/soc/qcom/qdsp6/q6afe-dai.c b/sound/soc/qcom/qdsp6/q6afe-dai.c index 074582afda85..e988692a3ced 100644 --- a/sound/soc/qcom/qdsp6/q6afe-dai.c +++ b/sound/soc/qcom/qdsp6/q6afe-dai.c @@ -4,7 +4,6 @@ #include #include -#include #include #include #include @@ -1395,11 +1394,12 @@ static void of_q6afe_parse_dai_data(struct device *dev, } } -static int q6afe_dai_bind(struct device *dev, struct device *master, void *data) +static int q6afe_dai_dev_probe(struct platform_device *pdev) { struct q6afe_dai_data *dai_data; + struct device *dev = &pdev->dev; - dai_data = kzalloc(sizeof(*dai_data), GFP_KERNEL); + dai_data = devm_kzalloc(dev, sizeof(*dai_data), GFP_KERNEL); if (!dai_data) return -ENOMEM; @@ -1407,35 +1407,10 @@ static int q6afe_dai_bind(struct device *dev, struct device *master, void *data) of_q6afe_parse_dai_data(dev, dai_data); - return snd_soc_register_component(dev, &q6afe_dai_component, + return devm_snd_soc_register_component(dev, &q6afe_dai_component, q6afe_dais, ARRAY_SIZE(q6afe_dais)); } -static void q6afe_dai_unbind(struct device *dev, struct device *master, - void *data) -{ - struct q6afe_dai_data *dai_data = dev_get_drvdata(dev); - - snd_soc_unregister_component(dev); - kfree(dai_data); -} - -static const struct component_ops q6afe_dai_comp_ops = { - .bind = q6afe_dai_bind, - .unbind = q6afe_dai_unbind, -}; - -static int q6afe_dai_dev_probe(struct platform_device *pdev) -{ - return component_add(&pdev->dev, &q6afe_dai_comp_ops); -} - -static int q6afe_dai_dev_remove(struct platform_device *pdev) -{ - component_del(&pdev->dev, &q6afe_dai_comp_ops); - return 0; -} - static const struct of_device_id q6afe_dai_device_id[] = { { .compatible = "qcom,q6afe-dais" }, {}, @@ -1448,7 +1423,6 @@ static struct platform_driver q6afe_dai_platform_driver = { .of_match_table = of_match_ptr(q6afe_dai_device_id), }, .probe = q6afe_dai_dev_probe, - .remove = q6afe_dai_dev_remove, }; module_platform_driver(q6afe_dai_platform_driver); -- cgit v1.2.3 From f924e4fd89659908107a5529f02c21edb4770dba Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Fri, 13 Jul 2018 16:36:30 +0100 Subject: ASoC: qdsp6: q6asm-dai: remove component framework related code Now that the component framework is integrated into the ASoC core, remove any redundant code in this driver. Signed-off-by: Srinivas Kandagatla Reviewed-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/qcom/qdsp6/q6asm-dai.c | 35 ++++------------------------------- 1 file changed, 4 insertions(+), 31 deletions(-) diff --git a/sound/soc/qcom/qdsp6/q6asm-dai.c b/sound/soc/qcom/qdsp6/q6asm-dai.c index 1196dc7483d2..acf96c6549fc 100644 --- a/sound/soc/qcom/qdsp6/q6asm-dai.c +++ b/sound/soc/qcom/qdsp6/q6asm-dai.c @@ -7,7 +7,6 @@ #include #include #include -#include #include #include #include @@ -561,14 +560,15 @@ static struct snd_soc_dai_driver q6asm_fe_dais[] = { Q6ASM_FEDAI_DRIVER(8), }; -static int q6asm_dai_bind(struct device *dev, struct device *master, void *data) +static int q6asm_dai_probe(struct platform_device *pdev) { + struct device *dev = &pdev->dev; struct device_node *node = dev->of_node; struct of_phandle_args args; struct q6asm_dai_data *pdata; int rc; - pdata = kzalloc(sizeof(struct q6asm_dai_data), GFP_KERNEL); + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) return -ENOMEM; @@ -580,36 +580,10 @@ static int q6asm_dai_bind(struct device *dev, struct device *master, void *data) dev_set_drvdata(dev, pdata); - return snd_soc_register_component(dev, &q6asm_fe_dai_component, + return devm_snd_soc_register_component(dev, &q6asm_fe_dai_component, q6asm_fe_dais, ARRAY_SIZE(q6asm_fe_dais)); } -static void q6asm_dai_unbind(struct device *dev, struct device *master, - void *data) -{ - struct q6asm_dai_data *pdata = dev_get_drvdata(dev); - - snd_soc_unregister_component(dev); - - kfree(pdata); - -} - -static const struct component_ops q6asm_dai_comp_ops = { - .bind = q6asm_dai_bind, - .unbind = q6asm_dai_unbind, -}; - -static int q6asm_dai_probe(struct platform_device *pdev) -{ - return component_add(&pdev->dev, &q6asm_dai_comp_ops); -} - -static int q6asm_dai_dev_remove(struct platform_device *pdev) -{ - component_del(&pdev->dev, &q6asm_dai_comp_ops); - return 0; -} static const struct of_device_id q6asm_dai_device_id[] = { { .compatible = "qcom,q6asm-dais" }, @@ -623,7 +597,6 @@ static struct platform_driver q6asm_dai_platform_driver = { .of_match_table = of_match_ptr(q6asm_dai_device_id), }, .probe = q6asm_dai_probe, - .remove = q6asm_dai_dev_remove, }; module_platform_driver(q6asm_dai_platform_driver); -- cgit v1.2.3 From 791940779d651c2219e97702d2245b5420b0c8ae Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Fri, 13 Jul 2018 16:36:31 +0100 Subject: ASoC: qdsp6: q6routing: remove component framework related code Now that the component framework is integrated into the ASoC core, remove any redundant code in this driver. Signed-off-by: Srinivas Kandagatla Reviewed-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/qcom/qdsp6/q6routing.c | 32 ++++++-------------------------- 1 file changed, 6 insertions(+), 26 deletions(-) diff --git a/sound/soc/qcom/qdsp6/q6routing.c b/sound/soc/qcom/qdsp6/q6routing.c index 35269b492761..1d33b00e5b44 100644 --- a/sound/soc/qcom/qdsp6/q6routing.c +++ b/sound/soc/qcom/qdsp6/q6routing.c @@ -8,7 +8,6 @@ #include #include #include -#include #include #include #include @@ -977,9 +976,10 @@ static const struct snd_soc_component_driver msm_soc_routing_component = { .num_dapm_routes = ARRAY_SIZE(intercon), }; -static int q6routing_dai_bind(struct device *dev, struct device *master, - void *data) +static int q6pcm_routing_probe(struct platform_device *pdev) { + struct device *dev = &pdev->dev; + routing_data = kzalloc(sizeof(*routing_data), GFP_KERNEL); if (!routing_data) return -ENOMEM; @@ -989,35 +989,15 @@ static int q6routing_dai_bind(struct device *dev, struct device *master, mutex_init(&routing_data->lock); dev_set_drvdata(dev, routing_data); - return snd_soc_register_component(dev, &msm_soc_routing_component, + return devm_snd_soc_register_component(dev, &msm_soc_routing_component, NULL, 0); } -static void q6routing_dai_unbind(struct device *dev, struct device *master, - void *d) +static int q6pcm_routing_remove(struct platform_device *pdev) { - struct msm_routing_data *data = dev_get_drvdata(dev); - - snd_soc_unregister_component(dev); - - kfree(data); - + kfree(routing_data); routing_data = NULL; -} -static const struct component_ops q6routing_dai_comp_ops = { - .bind = q6routing_dai_bind, - .unbind = q6routing_dai_unbind, -}; - -static int q6pcm_routing_probe(struct platform_device *pdev) -{ - return component_add(&pdev->dev, &q6routing_dai_comp_ops); -} - -static int q6pcm_routing_remove(struct platform_device *pdev) -{ - component_del(&pdev->dev, &q6routing_dai_comp_ops); return 0; } -- cgit v1.2.3 From 90ae7105eaf19342bb11e554059d62b84e01da12 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Fri, 13 Jul 2018 16:36:32 +0100 Subject: ASoC: qcom: apq8096: remove component framework related code Now that the component framework is integrated into the ASoC core, remove any redundant code in this driver. Signed-off-by: Srinivas Kandagatla Reviewed-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/qcom/apq8096.c | 75 ++++-------------------------------------------- 1 file changed, 6 insertions(+), 69 deletions(-) diff --git a/sound/soc/qcom/apq8096.c b/sound/soc/qcom/apq8096.c index cab8c4ff7c00..a56156281c8d 100644 --- a/sound/soc/qcom/apq8096.c +++ b/sound/soc/qcom/apq8096.c @@ -129,17 +129,18 @@ err: return ret; } -static int apq8096_bind(struct device *dev) +static int apq8096_platform_probe(struct platform_device *pdev) { struct snd_soc_card *card; + struct device *dev = &pdev->dev; int ret; card = kzalloc(sizeof(*card), GFP_KERNEL); if (!card) return -ENOMEM; - component_bind_all(dev, card); card->dev = dev; + card->auto_bind = true; dev_set_drvdata(dev, card); ret = apq8096_sbc_parse_of(card); if (ret) { @@ -154,82 +155,18 @@ static int apq8096_bind(struct device *dev) return 0; err: - component_unbind_all(dev, card); kfree(card); return ret; } -static void apq8096_unbind(struct device *dev) +static int apq8096_platform_remove(struct platform_device *pdev) { - struct snd_soc_card *card = dev_get_drvdata(dev); + struct snd_soc_card *card = dev_get_drvdata(&pdev->dev); + card->auto_bind = false; snd_soc_unregister_card(card); - component_unbind_all(dev, card); kfree(card->dai_link); kfree(card); -} - -static const struct component_master_ops apq8096_ops = { - .bind = apq8096_bind, - .unbind = apq8096_unbind, -}; - -static int apq8016_compare_of(struct device *dev, void *data) -{ - return dev->of_node == data; -} - -static void apq8016_release_of(struct device *dev, void *data) -{ - of_node_put(data); -} - -static int add_audio_components(struct device *dev, - struct component_match **matchptr) -{ - struct device_node *np, *platform, *cpu, *node, *dai_node; - - node = dev->of_node; - - for_each_child_of_node(node, np) { - cpu = of_get_child_by_name(np, "cpu"); - if (cpu) { - dai_node = of_parse_phandle(cpu, "sound-dai", 0); - of_node_get(dai_node); - component_match_add_release(dev, matchptr, - apq8016_release_of, - apq8016_compare_of, - dai_node); - } - - platform = of_get_child_by_name(np, "platform"); - if (platform) { - dai_node = of_parse_phandle(platform, "sound-dai", 0); - component_match_add_release(dev, matchptr, - apq8016_release_of, - apq8016_compare_of, - dai_node); - } - } - - return 0; -} - -static int apq8096_platform_probe(struct platform_device *pdev) -{ - struct component_match *match = NULL; - int ret; - - ret = add_audio_components(&pdev->dev, &match); - if (ret) - return ret; - - return component_master_add_with_match(&pdev->dev, &apq8096_ops, match); -} - -static int apq8096_platform_remove(struct platform_device *pdev) -{ - component_master_del(&pdev->dev, &apq8096_ops); return 0; } -- cgit v1.2.3 From bf270262b7b8bb7b48a846c613f74e800abba392 Mon Sep 17 00:00:00 2001 From: Sriram Periyasamy Date: Mon, 16 Jul 2018 15:32:34 +0530 Subject: ASoC: hdac_hdmi: Add documentation for power management Add documentation for power management of HDAC HDMI codec device for various scenarios such as S0/S3, probe and playback use case. Signed-off-by: Sriram Periyasamy Signed-off-by: Sanyog Kale Signed-off-by: Mark Brown --- sound/soc/codecs/hdac_hdmi.c | 69 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 69 insertions(+) diff --git a/sound/soc/codecs/hdac_hdmi.c b/sound/soc/codecs/hdac_hdmi.c index 84f7a7a36e4b..30ccc902e5cf 100644 --- a/sound/soc/codecs/hdac_hdmi.c +++ b/sound/soc/codecs/hdac_hdmi.c @@ -2103,6 +2103,75 @@ static int hdac_hdmi_dev_remove(struct hdac_ext_device *edev) } #ifdef CONFIG_PM +/* + * Power management sequences + * ========================== + * + * The following explains the PM handling of HDAC HDMI with its parent + * device SKL and display power usage + * + * Probe + * ----- + * In SKL probe, + * 1. skl_probe_work() powers up the display (refcount++ -> 1) + * 2. enumerates the codecs on the link + * 3. powers down the display (refcount-- -> 0) + * + * In HDAC HDMI probe, + * 1. hdac_hdmi_dev_probe() powers up the display (refcount++ -> 1) + * 2. probe the codec + * 3. put the HDAC HDMI device to runtime suspend + * 4. hdac_hdmi_runtime_suspend() powers down the display (refcount-- -> 0) + * + * Once children are runtime suspended, SKL device also goes to runtime + * suspend + * + * HDMI Playback + * ------------- + * Open HDMI device, + * 1. skl_runtime_resume() invoked + * 2. hdac_hdmi_runtime_resume() powers up the display (refcount++ -> 1) + * + * Close HDMI device, + * 1. hdac_hdmi_runtime_suspend() powers down the display (refcount-- -> 0) + * 2. skl_runtime_suspend() invoked + * + * S0/S3 Cycle with playback in progress + * ------------------------------------- + * When the device is opened for playback, the device is runtime active + * already and the display refcount is 1 as explained above. + * + * Entering to S3, + * 1. hdmi_codec_prepare() invoke the runtime resume of codec which just + * increments the PM runtime usage count of the codec since the device + * is in use already + * 2. skl_suspend() powers down the display (refcount-- -> 0) + * + * Wakeup from S3, + * 1. skl_resume() powers up the display (refcount++ -> 1) + * 2. hdmi_codec_complete() invokes the runtime suspend of codec which just + * decrements the PM runtime usage count of the codec since the device + * is in use already + * + * Once playback is stopped, the display refcount is set to 0 as explained + * above in the HDMI playback sequence. The PM handlings are designed in + * such way that to balance the refcount of display power when the codec + * device put to S3 while playback is going on. + * + * S0/S3 Cycle without playback in progress + * ---------------------------------------- + * Entering to S3, + * 1. hdmi_codec_prepare() invoke the runtime resume of codec + * 2. skl_runtime_resume() invoked + * 3. hdac_hdmi_runtime_resume() powers up the display (refcount++ -> 1) + * 4. skl_suspend() powers down the display (refcount-- -> 0) + * + * Wakeup from S3, + * 1. skl_resume() powers up the display (refcount++ -> 1) + * 2. hdmi_codec_complete() invokes the runtime suspend of codec + * 3. hdac_hdmi_runtime_suspend() powers down the display (refcount-- -> 0) + * 4. skl_runtime_suspend() invoked + */ static int hdac_hdmi_runtime_suspend(struct device *dev) { struct hdac_ext_device *edev = to_hda_ext_device(dev); -- cgit v1.2.3 From e32d99af6830c9a8f37b4f2637ef0cdc60fa79fb Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Tue, 17 Jul 2018 17:42:50 +0200 Subject: ASoC: meson: add axg fifos DT binding documentation Add the DT bindings documentation for axg's FIFOs: TODDR and FRDDR. Signed-off-by: Jerome Brunet Signed-off-by: Mark Brown --- .../devicetree/bindings/sound/amlogic,axg-fifo.txt | 23 ++++++++++++++++++++++ 1 file changed, 23 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-fifo.txt diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-fifo.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-fifo.txt new file mode 100644 index 000000000000..3dfc2515e5c6 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/amlogic,axg-fifo.txt @@ -0,0 +1,23 @@ +* Amlogic Audio FIFO controllers + +Required properties: +- compatible: 'amlogic,axg-toddr' or + 'amlogic,axg-frddr' +- reg: physical base address of the controller and length of memory + mapped region. +- interrupts: interrupt specifier for the fifo. +- clocks: phandle to the fifo peripheral clock provided by the audio + clock controller. +- resets: phandle to memory ARB line provided by the arb reset controller. +- #sound-dai-cells: must be 0. + +Example of FRDDR A on the A113 SoC: + +frddr_a: audio-controller@1c0 { + compatible = "amlogic,axg-frddr"; + reg = <0x0 0x1c0 0x0 0x1c>; + #sound-dai-cells = <0>; + interrupts = ; + clocks = <&clkc_audio AUD_CLKID_FRDDR_A>; + resets = <&arb AXG_ARB_FRDDR_A>; +}; -- cgit v1.2.3 From 6dc4fa179fb86d2c986b2bc8a8377fe4d8c0428d Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Tue, 17 Jul 2018 17:42:51 +0200 Subject: ASoC: meson: add axg fifo base driver Amlogic's axg SoCs have two types of fifos which are the memory interfaces of the audio subsystem. FRDDR provides the playback interface while TODDR provides the capture interface. The way these fifos operate is very similar. Only a few settings are specific to each. They implement the same pcm driver here and the specifics of each will be dealt with the related DAI driver. Signed-off-by: Jerome Brunet Signed-off-by: Mark Brown --- sound/soc/Kconfig | 1 + sound/soc/Makefile | 1 + sound/soc/meson/Kconfig | 8 ++ sound/soc/meson/Makefile | 5 + sound/soc/meson/axg-fifo.c | 341 +++++++++++++++++++++++++++++++++++++++++++++ sound/soc/meson/axg-fifo.h | 80 +++++++++++ 6 files changed, 436 insertions(+) create mode 100644 sound/soc/meson/Kconfig create mode 100644 sound/soc/meson/Makefile create mode 100644 sound/soc/meson/axg-fifo.c create mode 100644 sound/soc/meson/axg-fifo.h diff --git a/sound/soc/Kconfig b/sound/soc/Kconfig index 41af6b9cc350..1cf11cf51e1d 100644 --- a/sound/soc/Kconfig +++ b/sound/soc/Kconfig @@ -57,6 +57,7 @@ source "sound/soc/kirkwood/Kconfig" source "sound/soc/img/Kconfig" source "sound/soc/intel/Kconfig" source "sound/soc/mediatek/Kconfig" +source "sound/soc/meson/Kconfig" source "sound/soc/mxs/Kconfig" source "sound/soc/pxa/Kconfig" source "sound/soc/qcom/Kconfig" diff --git a/sound/soc/Makefile b/sound/soc/Makefile index 06389a5385d7..62a5f87c3cfc 100644 --- a/sound/soc/Makefile +++ b/sound/soc/Makefile @@ -38,6 +38,7 @@ obj-$(CONFIG_SND_SOC) += jz4740/ obj-$(CONFIG_SND_SOC) += img/ obj-$(CONFIG_SND_SOC) += intel/ obj-$(CONFIG_SND_SOC) += mediatek/ +obj-$(CONFIG_SND_SOC) += meson/ obj-$(CONFIG_SND_SOC) += mxs/ obj-$(CONFIG_SND_SOC) += nuc900/ obj-$(CONFIG_SND_SOC) += omap/ diff --git a/sound/soc/meson/Kconfig b/sound/soc/meson/Kconfig new file mode 100644 index 000000000000..c3eb5e050308 --- /dev/null +++ b/sound/soc/meson/Kconfig @@ -0,0 +1,8 @@ +menu "ASoC support for Amlogic platforms" + depends on ARCH_MESON || COMPILE_TEST + +config SND_MESON_AXG_FIFO + tristate + select REGMAP_MMIO + +endmenu diff --git a/sound/soc/meson/Makefile b/sound/soc/meson/Makefile new file mode 100644 index 000000000000..75289b6b3ade --- /dev/null +++ b/sound/soc/meson/Makefile @@ -0,0 +1,5 @@ +# SPDX-License-Identifier: (GPL-2.0 OR MIT) + +snd-soc-meson-axg-fifo-objs := axg-fifo.o + +obj-$(CONFIG_SND_MESON_AXG_FIFO) += snd-soc-meson-axg-fifo.o diff --git a/sound/soc/meson/axg-fifo.c b/sound/soc/meson/axg-fifo.c new file mode 100644 index 000000000000..db367d85290f --- /dev/null +++ b/sound/soc/meson/axg-fifo.c @@ -0,0 +1,341 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright (c) 2018 BayLibre, SAS. +// Author: Jerome Brunet + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "axg-fifo.h" + +/* + * This file implements the platform operations common to the playback and + * capture frontend DAI. The logic behind this two types of fifo is very + * similar but some difference exist. + * These differences the respective DAI drivers + */ + +static struct snd_pcm_hardware axg_fifo_hw = { + .info = (SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_BLOCK_TRANSFER | + SNDRV_PCM_INFO_PAUSE), + + .formats = AXG_FIFO_FORMATS, + .rate_min = 5512, + .rate_max = 192000, + .channels_min = 1, + .channels_max = AXG_FIFO_CH_MAX, + .period_bytes_min = AXG_FIFO_MIN_DEPTH, + .period_bytes_max = UINT_MAX, + .periods_min = 2, + .periods_max = UINT_MAX, + + /* No real justification for this */ + .buffer_bytes_max = 1 * 1024 * 1024, +}; + +static struct snd_soc_dai *axg_fifo_dai(struct snd_pcm_substream *ss) +{ + struct snd_soc_pcm_runtime *rtd = ss->private_data; + + return rtd->cpu_dai; +} + +static struct axg_fifo *axg_fifo_data(struct snd_pcm_substream *ss) +{ + struct snd_soc_dai *dai = axg_fifo_dai(ss); + + return snd_soc_dai_get_drvdata(dai); +} + +static struct device *axg_fifo_dev(struct snd_pcm_substream *ss) +{ + struct snd_soc_dai *dai = axg_fifo_dai(ss); + + return dai->dev; +} + +static void __dma_enable(struct axg_fifo *fifo, bool enable) +{ + regmap_update_bits(fifo->map, FIFO_CTRL0, CTRL0_DMA_EN, + enable ? CTRL0_DMA_EN : 0); +} + +static int axg_fifo_pcm_trigger(struct snd_pcm_substream *ss, int cmd) +{ + struct axg_fifo *fifo = axg_fifo_data(ss); + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + __dma_enable(fifo, true); + break; + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + case SNDRV_PCM_TRIGGER_STOP: + __dma_enable(fifo, false); + break; + default: + return -EINVAL; + } + + return 0; +} + +static snd_pcm_uframes_t axg_fifo_pcm_pointer(struct snd_pcm_substream *ss) +{ + struct axg_fifo *fifo = axg_fifo_data(ss); + struct snd_pcm_runtime *runtime = ss->runtime; + unsigned int addr; + + regmap_read(fifo->map, FIFO_STATUS2, &addr); + + return bytes_to_frames(runtime, addr - (unsigned int)runtime->dma_addr); +} + +static int axg_fifo_pcm_hw_params(struct snd_pcm_substream *ss, + struct snd_pcm_hw_params *params) +{ + struct snd_pcm_runtime *runtime = ss->runtime; + struct axg_fifo *fifo = axg_fifo_data(ss); + dma_addr_t end_ptr; + unsigned int burst_num; + int ret; + + ret = snd_pcm_lib_malloc_pages(ss, params_buffer_bytes(params)); + if (ret < 0) + return ret; + + /* Setup dma memory pointers */ + end_ptr = runtime->dma_addr + runtime->dma_bytes - AXG_FIFO_BURST; + regmap_write(fifo->map, FIFO_START_ADDR, runtime->dma_addr); + regmap_write(fifo->map, FIFO_FINISH_ADDR, end_ptr); + + /* Setup interrupt periodicity */ + burst_num = params_period_bytes(params) / AXG_FIFO_BURST; + regmap_write(fifo->map, FIFO_INT_ADDR, burst_num); + + /* Enable block count irq */ + regmap_update_bits(fifo->map, FIFO_CTRL0, + CTRL0_INT_EN(FIFO_INT_COUNT_REPEAT), + CTRL0_INT_EN(FIFO_INT_COUNT_REPEAT)); + + return 0; +} + +static int axg_fifo_pcm_hw_free(struct snd_pcm_substream *ss) +{ + struct axg_fifo *fifo = axg_fifo_data(ss); + + /* Disable the block count irq */ + regmap_update_bits(fifo->map, FIFO_CTRL0, + CTRL0_INT_EN(FIFO_INT_COUNT_REPEAT), 0); + + return snd_pcm_lib_free_pages(ss); +} + +static void axg_fifo_ack_irq(struct axg_fifo *fifo, u8 mask) +{ + regmap_update_bits(fifo->map, FIFO_CTRL1, + CTRL1_INT_CLR(FIFO_INT_MASK), + CTRL1_INT_CLR(mask)); + + /* Clear must also be cleared */ + regmap_update_bits(fifo->map, FIFO_CTRL1, + CTRL1_INT_CLR(FIFO_INT_MASK), + 0); +} + +static irqreturn_t axg_fifo_pcm_irq_block(int irq, void *dev_id) +{ + struct snd_pcm_substream *ss = dev_id; + struct axg_fifo *fifo = axg_fifo_data(ss); + unsigned int status; + + regmap_read(fifo->map, FIFO_STATUS1, &status); + + status = STATUS1_INT_STS(status) & FIFO_INT_MASK; + if (status & FIFO_INT_COUNT_REPEAT) + snd_pcm_period_elapsed(ss); + else + dev_dbg(axg_fifo_dev(ss), "unexpected irq - STS 0x%02x\n", + status); + + /* Ack irqs */ + axg_fifo_ack_irq(fifo, status); + + return !status ? IRQ_NONE : IRQ_HANDLED; +} + +static int axg_fifo_pcm_open(struct snd_pcm_substream *ss) +{ + struct axg_fifo *fifo = axg_fifo_data(ss); + struct device *dev = axg_fifo_dev(ss); + int ret; + + snd_soc_set_runtime_hwparams(ss, &axg_fifo_hw); + + /* + * Make sure the buffer and period size are multiple of the FIFO + * minimum depth size + */ + ret = snd_pcm_hw_constraint_step(ss->runtime, 0, + SNDRV_PCM_HW_PARAM_BUFFER_BYTES, + AXG_FIFO_MIN_DEPTH); + if (ret) + return ret; + + ret = snd_pcm_hw_constraint_step(ss->runtime, 0, + SNDRV_PCM_HW_PARAM_PERIOD_BYTES, + AXG_FIFO_MIN_DEPTH); + if (ret) + return ret; + + ret = request_irq(fifo->irq, axg_fifo_pcm_irq_block, 0, + dev_name(dev), ss); + + /* Enable pclk to access registers and clock the fifo ip */ + ret = clk_prepare_enable(fifo->pclk); + if (ret) + return ret; + + /* Setup status2 so it reports the memory pointer */ + regmap_update_bits(fifo->map, FIFO_CTRL1, + CTRL1_STATUS2_SEL_MASK, + CTRL1_STATUS2_SEL(STATUS2_SEL_DDR_READ)); + + /* Make sure the dma is initially disabled */ + __dma_enable(fifo, false); + + /* Disable irqs until params are ready */ + regmap_update_bits(fifo->map, FIFO_CTRL0, + CTRL0_INT_EN(FIFO_INT_MASK), 0); + + /* Clear any pending interrupt */ + axg_fifo_ack_irq(fifo, FIFO_INT_MASK); + + /* Take memory arbitror out of reset */ + ret = reset_control_deassert(fifo->arb); + if (ret) + clk_disable_unprepare(fifo->pclk); + + return ret; +} + +static int axg_fifo_pcm_close(struct snd_pcm_substream *ss) +{ + struct axg_fifo *fifo = axg_fifo_data(ss); + int ret; + + /* Put the memory arbitror back in reset */ + ret = reset_control_assert(fifo->arb); + + /* Disable fifo ip and register access */ + clk_disable_unprepare(fifo->pclk); + + /* remove IRQ */ + free_irq(fifo->irq, ss); + + return ret; +} + +const struct snd_pcm_ops axg_fifo_pcm_ops = { + .open = axg_fifo_pcm_open, + .close = axg_fifo_pcm_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = axg_fifo_pcm_hw_params, + .hw_free = axg_fifo_pcm_hw_free, + .pointer = axg_fifo_pcm_pointer, + .trigger = axg_fifo_pcm_trigger, +}; +EXPORT_SYMBOL_GPL(axg_fifo_pcm_ops); + +int axg_fifo_pcm_new(struct snd_soc_pcm_runtime *rtd, unsigned int type) +{ + struct snd_card *card = rtd->card->snd_card; + size_t size = axg_fifo_hw.buffer_bytes_max; + + return snd_pcm_lib_preallocate_pages(rtd->pcm->streams[type].substream, + SNDRV_DMA_TYPE_DEV, card->dev, + size, size); +} +EXPORT_SYMBOL_GPL(axg_fifo_pcm_new); + +static const struct regmap_config axg_fifo_regmap_cfg = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, + .max_register = FIFO_STATUS2, +}; + +int axg_fifo_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + const struct axg_fifo_match_data *data; + struct axg_fifo *fifo; + struct resource *res; + void __iomem *regs; + + data = of_device_get_match_data(dev); + if (!data) { + dev_err(dev, "failed to match device\n"); + return -ENODEV; + } + + fifo = devm_kzalloc(dev, sizeof(*fifo), GFP_KERNEL); + if (!fifo) + return -ENOMEM; + platform_set_drvdata(pdev, fifo); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + regs = devm_ioremap_resource(dev, res); + if (IS_ERR(regs)) + return PTR_ERR(regs); + + fifo->map = devm_regmap_init_mmio(dev, regs, &axg_fifo_regmap_cfg); + if (IS_ERR(fifo->map)) { + dev_err(dev, "failed to init regmap: %ld\n", + PTR_ERR(fifo->map)); + return PTR_ERR(fifo->map); + } + + fifo->pclk = devm_clk_get(dev, NULL); + if (IS_ERR(fifo->pclk)) { + if (PTR_ERR(fifo->pclk) != -EPROBE_DEFER) + dev_err(dev, "failed to get pclk: %ld\n", + PTR_ERR(fifo->pclk)); + return PTR_ERR(fifo->pclk); + } + + fifo->arb = devm_reset_control_get_exclusive(dev, NULL); + if (IS_ERR(fifo->arb)) { + if (PTR_ERR(fifo->arb) != -EPROBE_DEFER) + dev_err(dev, "failed to get arb reset: %ld\n", + PTR_ERR(fifo->arb)); + return PTR_ERR(fifo->arb); + } + + fifo->irq = of_irq_get(dev->of_node, 0); + if (fifo->irq <= 0) { + dev_err(dev, "failed to get irq: %d\n", fifo->irq); + return fifo->irq; + } + + return devm_snd_soc_register_component(dev, data->component_drv, + data->dai_drv, 1); +} +EXPORT_SYMBOL_GPL(axg_fifo_probe); + +MODULE_DESCRIPTION("Amlogic AXG fifo driver"); +MODULE_AUTHOR("Jerome Brunet "); +MODULE_LICENSE("GPL v2"); diff --git a/sound/soc/meson/axg-fifo.h b/sound/soc/meson/axg-fifo.h new file mode 100644 index 000000000000..cb6c4013ca33 --- /dev/null +++ b/sound/soc/meson/axg-fifo.h @@ -0,0 +1,80 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */ +/* + * Copyright (c) 2018 BayLibre, SAS. + * Author: Jerome Brunet + */ + +#ifndef _MESON_AXG_FIFO_H +#define _MESON_AXG_FIFO_H + +struct clk; +struct platform_device; +struct regmap; +struct reset_control; + +struct snd_soc_component_driver; +struct snd_soc_dai; +struct snd_soc_dai_driver; +struct snd_pcm_ops; +struct snd_soc_pcm_runtime; + +#define AXG_FIFO_CH_MAX 128 +#define AXG_FIFO_RATES (SNDRV_PCM_RATE_5512 | \ + SNDRV_PCM_RATE_8000_192000) +#define AXG_FIFO_FORMATS (SNDRV_PCM_FMTBIT_S8 | \ + SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S20_LE | \ + SNDRV_PCM_FMTBIT_S24_LE | \ + SNDRV_PCM_FMTBIT_S32_LE) + +#define AXG_FIFO_BURST 8 +#define AXG_FIFO_MIN_CNT 64 +#define AXG_FIFO_MIN_DEPTH (AXG_FIFO_BURST * AXG_FIFO_MIN_CNT) + +#define FIFO_INT_ADDR_FINISH BIT(0) +#define FIFO_INT_ADDR_INT BIT(1) +#define FIFO_INT_COUNT_REPEAT BIT(2) +#define FIFO_INT_COUNT_ONCE BIT(3) +#define FIFO_INT_FIFO_ZERO BIT(4) +#define FIFO_INT_FIFO_DEPTH BIT(5) +#define FIFO_INT_MASK GENMASK(7, 0) + +#define FIFO_CTRL0 0x00 +#define CTRL0_DMA_EN BIT(31) +#define CTRL0_INT_EN(x) ((x) << 16) +#define CTRL0_SEL_MASK GENMASK(2, 0) +#define CTRL0_SEL_SHIFT 0 +#define FIFO_CTRL1 0x04 +#define CTRL1_INT_CLR(x) ((x) << 0) +#define CTRL1_STATUS2_SEL_MASK GENMASK(11, 8) +#define CTRL1_STATUS2_SEL(x) ((x) << 8) +#define STATUS2_SEL_DDR_READ 0 +#define CTRL1_THRESHOLD_MASK GENMASK(23, 16) +#define CTRL1_THRESHOLD(x) ((x) << 16) +#define CTRL1_FRDDR_DEPTH_MASK GENMASK(31, 24) +#define CTRL1_FRDDR_DEPTH(x) ((x) << 24) +#define FIFO_START_ADDR 0x08 +#define FIFO_FINISH_ADDR 0x0c +#define FIFO_INT_ADDR 0x10 +#define FIFO_STATUS1 0x14 +#define STATUS1_INT_STS(x) ((x) << 0) +#define FIFO_STATUS2 0x18 + +struct axg_fifo { + struct regmap *map; + struct clk *pclk; + struct reset_control *arb; + int irq; +}; + +struct axg_fifo_match_data { + const struct snd_soc_component_driver *component_drv; + struct snd_soc_dai_driver *dai_drv; +}; + +extern const struct snd_pcm_ops axg_fifo_pcm_ops; + +int axg_fifo_pcm_new(struct snd_soc_pcm_runtime *rtd, unsigned int type); +int axg_fifo_probe(struct platform_device *pdev); + +#endif /* _MESON_AXG_FIFO_H */ -- cgit v1.2.3 From 57d552e3ea76003643b2e771042659ce71bac7c2 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Tue, 17 Jul 2018 17:42:52 +0200 Subject: ASoC: meson: add axg frddr driver Add the playback memory interface of Amlogic's axg SoCs. This device pulls data from DDR to an internal FIFO. This FIFO is then used to feed TDM and SPDIF Output devices. Signed-off-by: Jerome Brunet Signed-off-by: Mark Brown --- sound/soc/meson/Kconfig | 7 +++ sound/soc/meson/Makefile | 2 + sound/soc/meson/axg-frddr.c | 141 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 150 insertions(+) create mode 100644 sound/soc/meson/axg-frddr.c diff --git a/sound/soc/meson/Kconfig b/sound/soc/meson/Kconfig index c3eb5e050308..cdd78f62e8d7 100644 --- a/sound/soc/meson/Kconfig +++ b/sound/soc/meson/Kconfig @@ -5,4 +5,11 @@ config SND_MESON_AXG_FIFO tristate select REGMAP_MMIO +config SND_MESON_AXG_FRDDR + tristate "Amlogic AXG Playback FIFO support" + select SND_MESON_AXG_FIFO + help + Select Y or M to add support for the frontend playback interfaces + embedded in the Amlogic AXG SoC family + endmenu diff --git a/sound/soc/meson/Makefile b/sound/soc/meson/Makefile index 75289b6b3ade..9c5d7d4a8e33 100644 --- a/sound/soc/meson/Makefile +++ b/sound/soc/meson/Makefile @@ -1,5 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0 OR MIT) snd-soc-meson-axg-fifo-objs := axg-fifo.o +snd-soc-meson-axg-frddr-objs := axg-frddr.o obj-$(CONFIG_SND_MESON_AXG_FIFO) += snd-soc-meson-axg-fifo.o +obj-$(CONFIG_SND_MESON_AXG_FRDDR) += snd-soc-meson-axg-frddr.o diff --git a/sound/soc/meson/axg-frddr.c b/sound/soc/meson/axg-frddr.c new file mode 100644 index 000000000000..a6f6f6a2eca8 --- /dev/null +++ b/sound/soc/meson/axg-frddr.c @@ -0,0 +1,141 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright (c) 2018 BayLibre, SAS. +// Author: Jerome Brunet + +/* This driver implements the frontend playback DAI of AXG based SoCs */ + +#include +#include +#include +#include +#include +#include + +#include "axg-fifo.h" + +#define CTRL0_FRDDR_PP_MODE BIT(30) + +static int axg_frddr_dai_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct axg_fifo *fifo = snd_soc_dai_get_drvdata(dai); + unsigned int fifo_depth, fifo_threshold; + int ret; + + /* Enable pclk to access registers and clock the fifo ip */ + ret = clk_prepare_enable(fifo->pclk); + if (ret) + return ret; + + /* Apply single buffer mode to the interface */ + regmap_update_bits(fifo->map, FIFO_CTRL0, CTRL0_FRDDR_PP_MODE, 0); + + /* + * TODO: We could adapt the fifo depth and the fifo threshold + * depending on the expected memory throughput and lantencies + * For now, we'll just use the same values as the vendor kernel + * Depth and threshold are zero based. + */ + fifo_depth = AXG_FIFO_MIN_CNT - 1; + fifo_threshold = (AXG_FIFO_MIN_CNT / 2) - 1; + regmap_update_bits(fifo->map, FIFO_CTRL1, + CTRL1_FRDDR_DEPTH_MASK | CTRL1_THRESHOLD_MASK, + CTRL1_FRDDR_DEPTH(fifo_depth) | + CTRL1_THRESHOLD(fifo_threshold)); + + return 0; +} + +static void axg_frddr_dai_shutdown(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct axg_fifo *fifo = snd_soc_dai_get_drvdata(dai); + + clk_disable_unprepare(fifo->pclk); +} + +static int axg_frddr_pcm_new(struct snd_soc_pcm_runtime *rtd, + struct snd_soc_dai *dai) +{ + return axg_fifo_pcm_new(rtd, SNDRV_PCM_STREAM_PLAYBACK); +} + +static const struct snd_soc_dai_ops axg_frddr_ops = { + .startup = axg_frddr_dai_startup, + .shutdown = axg_frddr_dai_shutdown, +}; + +static struct snd_soc_dai_driver axg_frddr_dai_drv = { + .name = "FRDDR", + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = AXG_FIFO_CH_MAX, + .rates = AXG_FIFO_RATES, + .formats = AXG_FIFO_FORMATS, + }, + .ops = &axg_frddr_ops, + .pcm_new = axg_frddr_pcm_new, +}; + +static const char * const axg_frddr_sel_texts[] = { + "OUT 0", "OUT 1", "OUT 2", "OUT 3" +}; + +static SOC_ENUM_SINGLE_DECL(axg_frddr_sel_enum, FIFO_CTRL0, CTRL0_SEL_SHIFT, + axg_frddr_sel_texts); + +static const struct snd_kcontrol_new axg_frddr_out_demux = + SOC_DAPM_ENUM("Output Sink", axg_frddr_sel_enum); + +static const struct snd_soc_dapm_widget axg_frddr_dapm_widgets[] = { + SND_SOC_DAPM_DEMUX("SINK SEL", SND_SOC_NOPM, 0, 0, + &axg_frddr_out_demux), + SND_SOC_DAPM_AIF_OUT("OUT 0", NULL, 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_OUT("OUT 1", NULL, 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_OUT("OUT 2", NULL, 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_OUT("OUT 3", NULL, 0, SND_SOC_NOPM, 0, 0), +}; + +static const struct snd_soc_dapm_route axg_frddr_dapm_routes[] = { + { "SINK SEL", NULL, "Playback" }, + { "OUT 0", "OUT 0", "SINK SEL" }, + { "OUT 1", "OUT 1", "SINK SEL" }, + { "OUT 2", "OUT 2", "SINK SEL" }, + { "OUT 3", "OUT 3", "SINK SEL" }, +}; + +static const struct snd_soc_component_driver axg_frddr_component_drv = { + .dapm_widgets = axg_frddr_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(axg_frddr_dapm_widgets), + .dapm_routes = axg_frddr_dapm_routes, + .num_dapm_routes = ARRAY_SIZE(axg_frddr_dapm_routes), + .ops = &axg_fifo_pcm_ops +}; + +static const struct axg_fifo_match_data axg_frddr_match_data = { + .component_drv = &axg_frddr_component_drv, + .dai_drv = &axg_frddr_dai_drv +}; + +static const struct of_device_id axg_frddr_of_match[] = { + { + .compatible = "amlogic,axg-frddr", + .data = &axg_frddr_match_data, + }, {} +}; +MODULE_DEVICE_TABLE(of, axg_frddr_of_match); + +static struct platform_driver axg_frddr_pdrv = { + .probe = axg_fifo_probe, + .driver = { + .name = "axg-frddr", + .of_match_table = axg_frddr_of_match, + }, +}; +module_platform_driver(axg_frddr_pdrv); + +MODULE_DESCRIPTION("Amlogic AXG playback fifo driver"); +MODULE_AUTHOR("Jerome Brunet "); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3 From 7ed4877b403c9343a8e2c7581d9bcfceef0f40cf Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Tue, 17 Jul 2018 17:42:53 +0200 Subject: ASoC: meson: add axg toddr driver Add the capture memory interface of Amlogic's axg SoCs. TDM, SPDIF or PDM input devices place audio samples inside this FIFO. The FIFO content is then pushed to DDR Signed-off-by: Jerome Brunet Signed-off-by: Mark Brown --- sound/soc/meson/Kconfig | 7 ++ sound/soc/meson/Makefile | 2 + sound/soc/meson/axg-toddr.c | 199 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 208 insertions(+) create mode 100644 sound/soc/meson/axg-toddr.c diff --git a/sound/soc/meson/Kconfig b/sound/soc/meson/Kconfig index cdd78f62e8d7..3916060edcae 100644 --- a/sound/soc/meson/Kconfig +++ b/sound/soc/meson/Kconfig @@ -12,4 +12,11 @@ config SND_MESON_AXG_FRDDR Select Y or M to add support for the frontend playback interfaces embedded in the Amlogic AXG SoC family +config SND_MESON_AXG_TODDR + tristate "Amlogic AXG Capture FIFO support" + select SND_MESON_AXG_FIFO + help + Select Y or M to add support for the frontend capture interfaces + embedded in the Amlogic AXG SoC family + endmenu diff --git a/sound/soc/meson/Makefile b/sound/soc/meson/Makefile index 9c5d7d4a8e33..12edf2db2a24 100644 --- a/sound/soc/meson/Makefile +++ b/sound/soc/meson/Makefile @@ -2,6 +2,8 @@ snd-soc-meson-axg-fifo-objs := axg-fifo.o snd-soc-meson-axg-frddr-objs := axg-frddr.o +snd-soc-meson-axg-toddr-objs := axg-toddr.o obj-$(CONFIG_SND_MESON_AXG_FIFO) += snd-soc-meson-axg-fifo.o obj-$(CONFIG_SND_MESON_AXG_FRDDR) += snd-soc-meson-axg-frddr.o +obj-$(CONFIG_SND_MESON_AXG_TODDR) += snd-soc-meson-axg-toddr.o diff --git a/sound/soc/meson/axg-toddr.c b/sound/soc/meson/axg-toddr.c new file mode 100644 index 000000000000..c2c9bb312586 --- /dev/null +++ b/sound/soc/meson/axg-toddr.c @@ -0,0 +1,199 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright (c) 2018 BayLibre, SAS. +// Author: Jerome Brunet + +/* This driver implements the frontend capture DAI of AXG based SoCs */ + +#include +#include +#include +#include +#include +#include +#include + +#include "axg-fifo.h" + +#define CTRL0_TODDR_SEL_RESAMPLE BIT(30) +#define CTRL0_TODDR_EXT_SIGNED BIT(29) +#define CTRL0_TODDR_PP_MODE BIT(28) +#define CTRL0_TODDR_TYPE_MASK GENMASK(15, 13) +#define CTRL0_TODDR_TYPE(x) ((x) << 13) +#define CTRL0_TODDR_MSB_POS_MASK GENMASK(12, 8) +#define CTRL0_TODDR_MSB_POS(x) ((x) << 8) +#define CTRL0_TODDR_LSB_POS_MASK GENMASK(7, 3) +#define CTRL0_TODDR_LSB_POS(x) ((x) << 3) + +static int axg_toddr_pcm_new(struct snd_soc_pcm_runtime *rtd, + struct snd_soc_dai *dai) +{ + return axg_fifo_pcm_new(rtd, SNDRV_PCM_STREAM_CAPTURE); +} + +static int axg_toddr_dai_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct axg_fifo *fifo = snd_soc_dai_get_drvdata(dai); + unsigned int type, width, msb = 31; + + /* + * NOTE: + * Almost all backend will place the MSB at bit 31, except SPDIF Input + * which will put it at index 28. When adding support for the SPDIF + * Input, we'll need to find which type of backend we are connected to. + */ + + switch (params_physical_width(params)) { + case 8: + type = 0; /* 8 samples of 8 bits */ + break; + case 16: + type = 2; /* 4 samples of 16 bits - right justified */ + break; + case 32: + type = 4; /* 2 samples of 32 bits - right justified */ + break; + default: + return -EINVAL; + } + + width = params_width(params); + + regmap_update_bits(fifo->map, FIFO_CTRL0, + CTRL0_TODDR_TYPE_MASK | + CTRL0_TODDR_MSB_POS_MASK | + CTRL0_TODDR_LSB_POS_MASK, + CTRL0_TODDR_TYPE(type) | + CTRL0_TODDR_MSB_POS(msb) | + CTRL0_TODDR_LSB_POS(msb - (width - 1))); + + return 0; +} + +static int axg_toddr_dai_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct axg_fifo *fifo = snd_soc_dai_get_drvdata(dai); + unsigned int fifo_threshold; + int ret; + + /* Enable pclk to access registers and clock the fifo ip */ + ret = clk_prepare_enable(fifo->pclk); + if (ret) + return ret; + + /* Select orginal data - resampling not supported ATM */ + regmap_update_bits(fifo->map, FIFO_CTRL0, CTRL0_TODDR_SEL_RESAMPLE, 0); + + /* Only signed format are supported ATM */ + regmap_update_bits(fifo->map, FIFO_CTRL0, CTRL0_TODDR_EXT_SIGNED, + CTRL0_TODDR_EXT_SIGNED); + + /* Apply single buffer mode to the interface */ + regmap_update_bits(fifo->map, FIFO_CTRL0, CTRL0_TODDR_PP_MODE, 0); + + /* TODDR does not have a configurable fifo depth */ + fifo_threshold = AXG_FIFO_MIN_CNT - 1; + regmap_update_bits(fifo->map, FIFO_CTRL1, CTRL1_THRESHOLD_MASK, + CTRL1_THRESHOLD(fifo_threshold)); + + return 0; +} + +static void axg_toddr_dai_shutdown(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct axg_fifo *fifo = snd_soc_dai_get_drvdata(dai); + + clk_disable_unprepare(fifo->pclk); +} + +static const struct snd_soc_dai_ops axg_toddr_ops = { + .hw_params = axg_toddr_dai_hw_params, + .startup = axg_toddr_dai_startup, + .shutdown = axg_toddr_dai_shutdown, +}; + +static struct snd_soc_dai_driver axg_toddr_dai_drv = { + .name = "TODDR", + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = AXG_FIFO_CH_MAX, + .rates = AXG_FIFO_RATES, + .formats = AXG_FIFO_FORMATS, + }, + .ops = &axg_toddr_ops, + .pcm_new = axg_toddr_pcm_new, +}; + +static const char * const axg_toddr_sel_texts[] = { + "IN 0", "IN 1", "IN 2", "IN 3", "IN 4", "IN 6" +}; + +static const unsigned int axg_toddr_sel_values[] = { + 0, 1, 2, 3, 4, 6 +}; + +static SOC_VALUE_ENUM_SINGLE_DECL(axg_toddr_sel_enum, FIFO_CTRL0, + CTRL0_SEL_SHIFT, CTRL0_SEL_MASK, + axg_toddr_sel_texts, axg_toddr_sel_values); + +static const struct snd_kcontrol_new axg_toddr_in_mux = + SOC_DAPM_ENUM("Input Source", axg_toddr_sel_enum); + +static const struct snd_soc_dapm_widget axg_toddr_dapm_widgets[] = { + SND_SOC_DAPM_MUX("SRC SEL", SND_SOC_NOPM, 0, 0, &axg_toddr_in_mux), + SND_SOC_DAPM_AIF_IN("IN 0", NULL, 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_IN("IN 1", NULL, 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_IN("IN 2", NULL, 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_IN("IN 3", NULL, 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_IN("IN 4", NULL, 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_IN("IN 6", NULL, 0, SND_SOC_NOPM, 0, 0), +}; + +static const struct snd_soc_dapm_route axg_toddr_dapm_routes[] = { + { "Capture", NULL, "SRC SEL" }, + { "SRC SEL", "IN 0", "IN 0" }, + { "SRC SEL", "IN 1", "IN 1" }, + { "SRC SEL", "IN 2", "IN 2" }, + { "SRC SEL", "IN 3", "IN 3" }, + { "SRC SEL", "IN 4", "IN 4" }, + { "SRC SEL", "IN 6", "IN 6" }, +}; + +static const struct snd_soc_component_driver axg_toddr_component_drv = { + .dapm_widgets = axg_toddr_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(axg_toddr_dapm_widgets), + .dapm_routes = axg_toddr_dapm_routes, + .num_dapm_routes = ARRAY_SIZE(axg_toddr_dapm_routes), + .ops = &axg_fifo_pcm_ops +}; + +static const struct axg_fifo_match_data axg_toddr_match_data = { + .component_drv = &axg_toddr_component_drv, + .dai_drv = &axg_toddr_dai_drv +}; + +static const struct of_device_id axg_toddr_of_match[] = { + { + .compatible = "amlogic,axg-toddr", + .data = &axg_toddr_match_data, + }, {} +}; +MODULE_DEVICE_TABLE(of, axg_toddr_of_match); + +static struct platform_driver axg_toddr_pdrv = { + .probe = axg_fifo_probe, + .driver = { + .name = "axg-toddr", + .of_match_table = axg_toddr_of_match, + }, +}; +module_platform_driver(axg_toddr_pdrv); + +MODULE_DESCRIPTION("Amlogic AXG capture fifo driver"); +MODULE_AUTHOR("Jerome Brunet "); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3 From eb257e6607f96fd70a443750e9eaddbb49ba87ff Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Tue, 17 Jul 2018 17:42:54 +0200 Subject: ASoC: meson: add axg spdif output DT bindings documentation Add the DT bindings documentation for axg's SPDIF output. Signed-off-by: Jerome Brunet Signed-off-by: Mark Brown --- .../bindings/sound/amlogic,axg-spdifout.txt | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.txt diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.txt new file mode 100644 index 000000000000..521c38ad89e7 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.txt @@ -0,0 +1,20 @@ +* Amlogic Audio SPDIF Output + +Required properties: +- compatible: 'amlogic,axg-spdifout' +- clocks: list of clock phandle, one for each entry clock-names. +- clock-names: should contain the following: + * "pclk" : peripheral clock. + * "mclk" : master clock +- #sound-dai-cells: must be 0. + +Example on the A113 SoC: + +spdifout: audio-controller@480 { + compatible = "amlogic,axg-spdifout"; + reg = <0x0 0x480 0x0 0x50>; + #sound-dai-cells = <0>; + clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>, + <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>; + clock-names = "pclk", "mclk"; +}; -- cgit v1.2.3 From 53eb4b7aaa045e23b6e8edb0ae0d047a4a3612ef Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Tue, 17 Jul 2018 17:42:55 +0200 Subject: ASoC: meson: add axg spdif output Add support for the spdif output serializer of the axg SoC family Signed-off-by: Jerome Brunet Signed-off-by: Mark Brown --- sound/soc/meson/Kconfig | 7 + sound/soc/meson/Makefile | 2 + sound/soc/meson/axg-spdifout.c | 456 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 465 insertions(+) create mode 100644 sound/soc/meson/axg-spdifout.c diff --git a/sound/soc/meson/Kconfig b/sound/soc/meson/Kconfig index 3916060edcae..9408214b5854 100644 --- a/sound/soc/meson/Kconfig +++ b/sound/soc/meson/Kconfig @@ -19,4 +19,11 @@ config SND_MESON_AXG_TODDR Select Y or M to add support for the frontend capture interfaces embedded in the Amlogic AXG SoC family +config SND_MESON_AXG_SPDIFOUT + tristate "Amlogic AXG SPDIF Output Support" + imply SND_SOC_SPDIF + help + Select Y or M to add support for SPDIF output serializer embedded + in the Amlogic AXG SoC family + endmenu diff --git a/sound/soc/meson/Makefile b/sound/soc/meson/Makefile index 12edf2db2a24..d51ae045ef08 100644 --- a/sound/soc/meson/Makefile +++ b/sound/soc/meson/Makefile @@ -3,7 +3,9 @@ snd-soc-meson-axg-fifo-objs := axg-fifo.o snd-soc-meson-axg-frddr-objs := axg-frddr.o snd-soc-meson-axg-toddr-objs := axg-toddr.o +snd-soc-meson-axg-spdifout-objs := axg-spdifout.o obj-$(CONFIG_SND_MESON_AXG_FIFO) += snd-soc-meson-axg-fifo.o obj-$(CONFIG_SND_MESON_AXG_FRDDR) += snd-soc-meson-axg-frddr.o obj-$(CONFIG_SND_MESON_AXG_TODDR) += snd-soc-meson-axg-toddr.o +obj-$(CONFIG_SND_MESON_AXG_SPDIFOUT) += snd-soc-meson-axg-spdifout.o diff --git a/sound/soc/meson/axg-spdifout.c b/sound/soc/meson/axg-spdifout.c new file mode 100644 index 000000000000..9dea528053ad --- /dev/null +++ b/sound/soc/meson/axg-spdifout.c @@ -0,0 +1,456 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright (c) 2018 BayLibre, SAS. +// Author: Jerome Brunet + +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * NOTE: + * The meaning of bits SPDIFOUT_CTRL0_XXX_SEL is actually the opposite + * of what the documentation says. Manual control on V, U and C bits is + * applied when the related sel bits are cleared + */ + +#define SPDIFOUT_STAT 0x00 +#define SPDIFOUT_GAIN0 0x04 +#define SPDIFOUT_GAIN1 0x08 +#define SPDIFOUT_CTRL0 0x0c +#define SPDIFOUT_CTRL0_EN BIT(31) +#define SPDIFOUT_CTRL0_RST_OUT BIT(29) +#define SPDIFOUT_CTRL0_RST_IN BIT(28) +#define SPDIFOUT_CTRL0_USEL BIT(26) +#define SPDIFOUT_CTRL0_USET BIT(25) +#define SPDIFOUT_CTRL0_CHSTS_SEL BIT(24) +#define SPDIFOUT_CTRL0_DATA_SEL BIT(20) +#define SPDIFOUT_CTRL0_MSB_FIRST BIT(19) +#define SPDIFOUT_CTRL0_VSEL BIT(18) +#define SPDIFOUT_CTRL0_VSET BIT(17) +#define SPDIFOUT_CTRL0_MASK_MASK GENMASK(11, 4) +#define SPDIFOUT_CTRL0_MASK(x) ((x) << 4) +#define SPDIFOUT_CTRL1 0x10 +#define SPDIFOUT_CTRL1_MSB_POS_MASK GENMASK(12, 8) +#define SPDIFOUT_CTRL1_MSB_POS(x) ((x) << 8) +#define SPDIFOUT_CTRL1_TYPE_MASK GENMASK(6, 4) +#define SPDIFOUT_CTRL1_TYPE(x) ((x) << 4) +#define SPDIFOUT_PREAMB 0x14 +#define SPDIFOUT_SWAP 0x18 +#define SPDIFOUT_CHSTS0 0x1c +#define SPDIFOUT_CHSTS1 0x20 +#define SPDIFOUT_CHSTS2 0x24 +#define SPDIFOUT_CHSTS3 0x28 +#define SPDIFOUT_CHSTS4 0x2c +#define SPDIFOUT_CHSTS5 0x30 +#define SPDIFOUT_CHSTS6 0x34 +#define SPDIFOUT_CHSTS7 0x38 +#define SPDIFOUT_CHSTS8 0x3c +#define SPDIFOUT_CHSTS9 0x40 +#define SPDIFOUT_CHSTSA 0x44 +#define SPDIFOUT_CHSTSB 0x48 +#define SPDIFOUT_MUTE_VAL 0x4c + +struct axg_spdifout { + struct regmap *map; + struct clk *mclk; + struct clk *pclk; +}; + +static void axg_spdifout_enable(struct regmap *map) +{ + /* Apply both reset */ + regmap_update_bits(map, SPDIFOUT_CTRL0, + SPDIFOUT_CTRL0_RST_OUT | SPDIFOUT_CTRL0_RST_IN, + 0); + + /* Clear out reset before in reset */ + regmap_update_bits(map, SPDIFOUT_CTRL0, + SPDIFOUT_CTRL0_RST_OUT, SPDIFOUT_CTRL0_RST_OUT); + regmap_update_bits(map, SPDIFOUT_CTRL0, + SPDIFOUT_CTRL0_RST_IN, SPDIFOUT_CTRL0_RST_IN); + + /* Enable spdifout */ + regmap_update_bits(map, SPDIFOUT_CTRL0, SPDIFOUT_CTRL0_EN, + SPDIFOUT_CTRL0_EN); +} + +static void axg_spdifout_disable(struct regmap *map) +{ + regmap_update_bits(map, SPDIFOUT_CTRL0, SPDIFOUT_CTRL0_EN, 0); +} + +static int axg_spdifout_trigger(struct snd_pcm_substream *substream, int cmd, + struct snd_soc_dai *dai) +{ + struct axg_spdifout *priv = snd_soc_dai_get_drvdata(dai); + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + axg_spdifout_enable(priv->map); + return 0; + + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + axg_spdifout_disable(priv->map); + return 0; + + default: + return -EINVAL; + } +} + +static int axg_spdifout_digital_mute(struct snd_soc_dai *dai, int mute) +{ + struct axg_spdifout *priv = snd_soc_dai_get_drvdata(dai); + + /* Use spdif valid bit to perform digital mute */ + regmap_update_bits(priv->map, SPDIFOUT_CTRL0, SPDIFOUT_CTRL0_VSET, + mute ? SPDIFOUT_CTRL0_VSET : 0); + + return 0; +} + +static int axg_spdifout_sample_fmt(struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct axg_spdifout *priv = snd_soc_dai_get_drvdata(dai); + unsigned int val; + + /* Set the samples spdifout will pull from the FIFO */ + switch (params_channels(params)) { + case 1: + val = SPDIFOUT_CTRL0_MASK(0x1); + break; + case 2: + val = SPDIFOUT_CTRL0_MASK(0x3); + break; + default: + dev_err(dai->dev, "too many channels for spdif dai: %u\n", + params_channels(params)); + return -EINVAL; + } + + regmap_update_bits(priv->map, SPDIFOUT_CTRL0, + SPDIFOUT_CTRL0_MASK_MASK, val); + + /* FIFO data are arranged in chunks of 64bits */ + switch (params_physical_width(params)) { + case 8: + /* 8 samples of 8 bits */ + val = SPDIFOUT_CTRL1_TYPE(0); + break; + case 16: + /* 4 samples of 16 bits - right justified */ + val = SPDIFOUT_CTRL1_TYPE(2); + break; + case 32: + /* 2 samples of 32 bits - right justified */ + val = SPDIFOUT_CTRL1_TYPE(4); + break; + default: + dev_err(dai->dev, "Unsupported physical width: %u\n", + params_physical_width(params)); + return -EINVAL; + } + + /* Position of the MSB in FIFO samples */ + val |= SPDIFOUT_CTRL1_MSB_POS(params_width(params) - 1); + + regmap_update_bits(priv->map, SPDIFOUT_CTRL1, + SPDIFOUT_CTRL1_MSB_POS_MASK | + SPDIFOUT_CTRL1_TYPE_MASK, val); + + regmap_update_bits(priv->map, SPDIFOUT_CTRL0, + SPDIFOUT_CTRL0_MSB_FIRST | SPDIFOUT_CTRL0_DATA_SEL, + 0); + + return 0; +} + +static int axg_spdifout_set_chsts(struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct axg_spdifout *priv = snd_soc_dai_get_drvdata(dai); + unsigned int offset; + int ret; + u8 cs[4]; + u32 val; + + ret = snd_pcm_create_iec958_consumer_hw_params(params, cs, 4); + if (ret < 0) { + dev_err(dai->dev, "Creating IEC958 channel status failed %d\n", + ret); + return ret; + } + val = cs[0] | cs[1] << 8 | cs[2] << 16 | cs[3] << 24; + + /* Setup channel status A bits [31 - 0]*/ + regmap_write(priv->map, SPDIFOUT_CHSTS0, val); + + /* Clear channel status A bits [191 - 32] */ + for (offset = SPDIFOUT_CHSTS1; offset <= SPDIFOUT_CHSTS5; + offset += regmap_get_reg_stride(priv->map)) + regmap_write(priv->map, offset, 0); + + /* Setup channel status B bits [31 - 0]*/ + regmap_write(priv->map, SPDIFOUT_CHSTS6, val); + + /* Clear channel status B bits [191 - 32] */ + for (offset = SPDIFOUT_CHSTS7; offset <= SPDIFOUT_CHSTSB; + offset += regmap_get_reg_stride(priv->map)) + regmap_write(priv->map, offset, 0); + + return 0; +} + +static int axg_spdifout_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct axg_spdifout *priv = snd_soc_dai_get_drvdata(dai); + unsigned int rate = params_rate(params); + int ret; + + /* 2 * 32bits per subframe * 2 channels = 128 */ + ret = clk_set_rate(priv->mclk, rate * 128); + if (ret) { + dev_err(dai->dev, "failed to set spdif clock\n"); + return ret; + } + + ret = axg_spdifout_sample_fmt(params, dai); + if (ret) { + dev_err(dai->dev, "failed to setup sample format\n"); + return ret; + } + + ret = axg_spdifout_set_chsts(params, dai); + if (ret) { + dev_err(dai->dev, "failed to setup channel status words\n"); + return ret; + } + + return 0; +} + +static int axg_spdifout_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct axg_spdifout *priv = snd_soc_dai_get_drvdata(dai); + int ret; + + /* Clock the spdif output block */ + ret = clk_prepare_enable(priv->pclk); + if (ret) { + dev_err(dai->dev, "failed to enable pclk\n"); + return ret; + } + + /* Make sure the block is initially stopped */ + axg_spdifout_disable(priv->map); + + /* Insert data from bit 27 lsb first */ + regmap_update_bits(priv->map, SPDIFOUT_CTRL0, + SPDIFOUT_CTRL0_MSB_FIRST | SPDIFOUT_CTRL0_DATA_SEL, + 0); + + /* Manual control of V, C and U, U = 0 */ + regmap_update_bits(priv->map, SPDIFOUT_CTRL0, + SPDIFOUT_CTRL0_CHSTS_SEL | SPDIFOUT_CTRL0_VSEL | + SPDIFOUT_CTRL0_USEL | SPDIFOUT_CTRL0_USET, + 0); + + /* Static SWAP configuration ATM */ + regmap_write(priv->map, SPDIFOUT_SWAP, 0x10); + + return 0; +} + +static void axg_spdifout_shutdown(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct axg_spdifout *priv = snd_soc_dai_get_drvdata(dai); + + clk_disable_unprepare(priv->pclk); +} + +static const struct snd_soc_dai_ops axg_spdifout_ops = { + .trigger = axg_spdifout_trigger, + .digital_mute = axg_spdifout_digital_mute, + .hw_params = axg_spdifout_hw_params, + .startup = axg_spdifout_startup, + .shutdown = axg_spdifout_shutdown, +}; + +static struct snd_soc_dai_driver axg_spdifout_dai_drv[] = { + { + .name = "SPDIF Output", + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = 2, + .rates = (SNDRV_PCM_RATE_32000 | + SNDRV_PCM_RATE_44100 | + SNDRV_PCM_RATE_48000 | + SNDRV_PCM_RATE_88200 | + SNDRV_PCM_RATE_96000 | + SNDRV_PCM_RATE_176400 | + SNDRV_PCM_RATE_192000), + .formats = (SNDRV_PCM_FMTBIT_S8 | + SNDRV_PCM_FMTBIT_S16_LE | + SNDRV_PCM_FMTBIT_S20_LE | + SNDRV_PCM_FMTBIT_S24_LE), + }, + .ops = &axg_spdifout_ops, + }, +}; + +static const char * const spdifout_sel_texts[] = { + "IN 0", "IN 1", "IN 2", +}; + +static SOC_ENUM_SINGLE_DECL(axg_spdifout_sel_enum, SPDIFOUT_CTRL1, 24, + spdifout_sel_texts); + +static const struct snd_kcontrol_new axg_spdifout_in_mux = + SOC_DAPM_ENUM("Input Source", axg_spdifout_sel_enum); + +static const struct snd_soc_dapm_widget axg_spdifout_dapm_widgets[] = { + SND_SOC_DAPM_AIF_IN("IN 0", NULL, 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_IN("IN 1", NULL, 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_IN("IN 2", NULL, 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_MUX("SRC SEL", SND_SOC_NOPM, 0, 0, &axg_spdifout_in_mux), +}; + +static const struct snd_soc_dapm_route axg_spdifout_dapm_routes[] = { + { "SRC SEL", "IN 0", "IN 0" }, + { "SRC SEL", "IN 1", "IN 1" }, + { "SRC SEL", "IN 2", "IN 2" }, + { "Playback", NULL, "SRC SEL" }, +}; + +static const struct snd_kcontrol_new axg_spdifout_controls[] = { + SOC_DOUBLE("Playback Volume", SPDIFOUT_GAIN0, 0, 8, 255, 0), + SOC_DOUBLE("Playback Switch", SPDIFOUT_CTRL0, 22, 21, 1, 1), + SOC_SINGLE("Playback Gain Enable Switch", + SPDIFOUT_CTRL1, 26, 1, 0), + SOC_SINGLE("Playback Channels Mix Switch", + SPDIFOUT_CTRL0, 23, 1, 0), +}; + +static int axg_spdifout_set_bias_level(struct snd_soc_component *component, + enum snd_soc_bias_level level) +{ + struct axg_spdifout *priv = snd_soc_component_get_drvdata(component); + enum snd_soc_bias_level now = + snd_soc_component_get_bias_level(component); + int ret = 0; + + switch (level) { + case SND_SOC_BIAS_PREPARE: + if (now == SND_SOC_BIAS_STANDBY) + ret = clk_prepare_enable(priv->mclk); + break; + + case SND_SOC_BIAS_STANDBY: + if (now == SND_SOC_BIAS_PREPARE) + clk_disable_unprepare(priv->mclk); + break; + + case SND_SOC_BIAS_OFF: + case SND_SOC_BIAS_ON: + break; + } + + return ret; +} + +static const struct snd_soc_component_driver axg_spdifout_component_drv = { + .controls = axg_spdifout_controls, + .num_controls = ARRAY_SIZE(axg_spdifout_controls), + .dapm_widgets = axg_spdifout_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(axg_spdifout_dapm_widgets), + .dapm_routes = axg_spdifout_dapm_routes, + .num_dapm_routes = ARRAY_SIZE(axg_spdifout_dapm_routes), + .set_bias_level = axg_spdifout_set_bias_level, +}; + +static const struct regmap_config axg_spdifout_regmap_cfg = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, + .max_register = SPDIFOUT_MUTE_VAL, +}; + +static const struct of_device_id axg_spdifout_of_match[] = { + { .compatible = "amlogic,axg-spdifout", }, + {} +}; +MODULE_DEVICE_TABLE(of, axg_spdifout_of_match); + +static int axg_spdifout_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct axg_spdifout *priv; + struct resource *res; + void __iomem *regs; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + platform_set_drvdata(pdev, priv); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + regs = devm_ioremap_resource(dev, res); + if (IS_ERR(regs)) + return PTR_ERR(regs); + + priv->map = devm_regmap_init_mmio(dev, regs, &axg_spdifout_regmap_cfg); + if (IS_ERR(priv->map)) { + dev_err(dev, "failed to init regmap: %ld\n", + PTR_ERR(priv->map)); + return PTR_ERR(priv->map); + } + + priv->pclk = devm_clk_get(dev, "pclk"); + if (IS_ERR(priv->pclk)) { + ret = PTR_ERR(priv->pclk); + if (ret != -EPROBE_DEFER) + dev_err(dev, "failed to get pclk: %d\n", ret); + return ret; + } + + priv->mclk = devm_clk_get(dev, "mclk"); + if (IS_ERR(priv->mclk)) { + ret = PTR_ERR(priv->mclk); + if (ret != -EPROBE_DEFER) + dev_err(dev, "failed to get mclk: %d\n", ret); + return ret; + } + + return devm_snd_soc_register_component(dev, &axg_spdifout_component_drv, + axg_spdifout_dai_drv, ARRAY_SIZE(axg_spdifout_dai_drv)); +} + +static struct platform_driver axg_spdifout_pdrv = { + .probe = axg_spdifout_probe, + .driver = { + .name = "axg-spdifout", + .of_match_table = axg_spdifout_of_match, + }, +}; +module_platform_driver(axg_spdifout_pdrv); + +MODULE_DESCRIPTION("Amlogic AXG SPDIF Output driver"); +MODULE_AUTHOR("Jerome Brunet "); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3 From 7713a70034f2cb54168d134ac523fdfcdda92a13 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Tue, 17 Jul 2018 17:42:56 +0200 Subject: ASoC: meson: add axg tdm formatters DT bindings documentation Add the DT bindings documentation for axg's TDM formatters: TDMIN and TDMOUT. Signed-off-by: Jerome Brunet Signed-off-by: Mark Brown --- .../bindings/sound/amlogic,axg-tdm-formatters.txt | 28 ++++++++++++++++++++++ 1 file changed, 28 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.txt diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.txt new file mode 100644 index 000000000000..1c1b7490554e --- /dev/null +++ b/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.txt @@ -0,0 +1,28 @@ +* Amlogic Audio TDM formatters + +Required properties: +- compatible: 'amlogic,axg-tdmin' or + 'amlogic,axg-tdmout' +- reg: physical base address of the controller and length of memory + mapped region. +- clocks: list of clock phandle, one for each entry clock-names. +- clock-names: should contain the following: + * "pclk" : peripheral clock. + * "sclk" : bit clock. + * "sclk_sel" : bit clock input multiplexer. + * "lrclk" : sample clock + * "lrclk_sel": sample clock input multiplexer + +Example of TDMOUT_A on the A113 SoC: + +tdmout_a: audio-controller@500 { + compatible = "amlogic,axg-tdmout"; + reg = <0x0 0x500 0x0 0x40>; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>, + <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; +}; -- cgit v1.2.3 From b3fc2ab37e27f8d6588a4755382346ba2335a7c7 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 17 Jul 2018 10:52:29 -0500 Subject: drm/amdgpu: add another ATPX quirk for TOPAZ Needs ATPX rather than _PR3. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=200517 Reviewed-by: Junwei Zhang Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c index 9ab89371d9e8..ca8bf1c9a98e 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c @@ -575,6 +575,7 @@ static const struct amdgpu_px_quirk amdgpu_px_quirk_list[] = { { 0x1002, 0x6900, 0x1002, 0x0124, AMDGPU_PX_QUIRK_FORCE_ATPX }, { 0x1002, 0x6900, 0x1028, 0x0812, AMDGPU_PX_QUIRK_FORCE_ATPX }, { 0x1002, 0x6900, 0x1028, 0x0813, AMDGPU_PX_QUIRK_FORCE_ATPX }, + { 0x1002, 0x6900, 0x1025, 0x125A, AMDGPU_PX_QUIRK_FORCE_ATPX }, { 0, 0, 0, 0, 0 }, }; -- cgit v1.2.3 From 2d95ceb45459357288058c646022019d257ae04b Mon Sep 17 00:00:00 2001 From: Vijendar Mukunda Date: Fri, 16 Feb 2018 14:14:03 +0530 Subject: drm/amd/amdgpu: creating two I2S instances for stoney/cz (v2) Creating two I2S instances for Stoney/cz platforms. v2: squash in: "drm/amdgpu/acp: Fix slab-out-of-bounds in mfd_add_device in acp_hw_init" From Daniel Kurtz . Signed-off-by: Vijendar Mukunda Signed-off-by: Akshu Agrawal Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c | 47 ++++++++++++++++++++++++++------- 1 file changed, 37 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c index f4c474a95875..71efcf38f11b 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c @@ -57,6 +57,10 @@ #define ACP_I2S_COMP2_CAP_REG_OFFSET 0xa8 #define ACP_I2S_COMP1_PLAY_REG_OFFSET 0x6c #define ACP_I2S_COMP2_PLAY_REG_OFFSET 0x68 +#define ACP_BT_PLAY_REGS_START 0x14970 +#define ACP_BT_PLAY_REGS_END 0x14a24 +#define ACP_BT_COMP1_REG_OFFSET 0xac +#define ACP_BT_COMP2_REG_OFFSET 0xa8 #define mmACP_PGFSM_RETAIN_REG 0x51c9 #define mmACP_PGFSM_CONFIG_REG 0x51ca @@ -77,7 +81,7 @@ #define ACP_SOFT_RESET_DONE_TIME_OUT_VALUE 0x000000FF #define ACP_TIMEOUT_LOOP 0x000000FF -#define ACP_DEVS 3 +#define ACP_DEVS 4 #define ACP_SRC_ID 162 enum { @@ -316,14 +320,13 @@ static int acp_hw_init(void *handle) if (adev->acp.acp_cell == NULL) return -ENOMEM; - adev->acp.acp_res = kcalloc(4, sizeof(struct resource), GFP_KERNEL); - + adev->acp.acp_res = kcalloc(5, sizeof(struct resource), GFP_KERNEL); if (adev->acp.acp_res == NULL) { kfree(adev->acp.acp_cell); return -ENOMEM; } - i2s_pdata = kcalloc(2, sizeof(struct i2s_platform_data), GFP_KERNEL); + i2s_pdata = kcalloc(3, sizeof(struct i2s_platform_data), GFP_KERNEL); if (i2s_pdata == NULL) { kfree(adev->acp.acp_res); kfree(adev->acp.acp_cell); @@ -358,6 +361,20 @@ static int acp_hw_init(void *handle) i2s_pdata[1].i2s_reg_comp1 = ACP_I2S_COMP1_CAP_REG_OFFSET; i2s_pdata[1].i2s_reg_comp2 = ACP_I2S_COMP2_CAP_REG_OFFSET; + i2s_pdata[2].quirks = DW_I2S_QUIRK_COMP_REG_OFFSET; + switch (adev->asic_type) { + case CHIP_STONEY: + i2s_pdata[2].quirks |= DW_I2S_QUIRK_16BIT_IDX_OVERRIDE; + break; + default: + break; + } + + i2s_pdata[2].cap = DWC_I2S_PLAY | DWC_I2S_RECORD; + i2s_pdata[2].snd_rates = SNDRV_PCM_RATE_8000_96000; + i2s_pdata[2].i2s_reg_comp1 = ACP_BT_COMP1_REG_OFFSET; + i2s_pdata[2].i2s_reg_comp2 = ACP_BT_COMP2_REG_OFFSET; + adev->acp.acp_res[0].name = "acp2x_dma"; adev->acp.acp_res[0].flags = IORESOURCE_MEM; adev->acp.acp_res[0].start = acp_base; @@ -373,13 +390,18 @@ static int acp_hw_init(void *handle) adev->acp.acp_res[2].start = acp_base + ACP_I2S_CAP_REGS_START; adev->acp.acp_res[2].end = acp_base + ACP_I2S_CAP_REGS_END; - adev->acp.acp_res[3].name = "acp2x_dma_irq"; - adev->acp.acp_res[3].flags = IORESOURCE_IRQ; - adev->acp.acp_res[3].start = amdgpu_irq_create_mapping(adev, 162); - adev->acp.acp_res[3].end = adev->acp.acp_res[3].start; + adev->acp.acp_res[3].name = "acp2x_dw_bt_i2s_play_cap"; + adev->acp.acp_res[3].flags = IORESOURCE_MEM; + adev->acp.acp_res[3].start = acp_base + ACP_BT_PLAY_REGS_START; + adev->acp.acp_res[3].end = acp_base + ACP_BT_PLAY_REGS_END; + + adev->acp.acp_res[4].name = "acp2x_dma_irq"; + adev->acp.acp_res[4].flags = IORESOURCE_IRQ; + adev->acp.acp_res[4].start = amdgpu_irq_create_mapping(adev, 162); + adev->acp.acp_res[4].end = adev->acp.acp_res[4].start; adev->acp.acp_cell[0].name = "acp_audio_dma"; - adev->acp.acp_cell[0].num_resources = 4; + adev->acp.acp_cell[0].num_resources = 5; adev->acp.acp_cell[0].resources = &adev->acp.acp_res[0]; adev->acp.acp_cell[0].platform_data = &adev->asic_type; adev->acp.acp_cell[0].pdata_size = sizeof(adev->asic_type); @@ -396,6 +418,12 @@ static int acp_hw_init(void *handle) adev->acp.acp_cell[2].platform_data = &i2s_pdata[1]; adev->acp.acp_cell[2].pdata_size = sizeof(struct i2s_platform_data); + adev->acp.acp_cell[3].name = "designware-i2s"; + adev->acp.acp_cell[3].num_resources = 1; + adev->acp.acp_cell[3].resources = &adev->acp.acp_res[3]; + adev->acp.acp_cell[3].platform_data = &i2s_pdata[2]; + adev->acp.acp_cell[3].pdata_size = sizeof(struct i2s_platform_data); + r = mfd_add_hotplug_devices(adev->acp.parent, adev->acp.acp_cell, ACP_DEVS); if (r) @@ -451,7 +479,6 @@ static int acp_hw_init(void *handle) val = cgs_read_register(adev->acp.cgs_device, mmACP_SOFT_RESET); val &= ~ACP_SOFT_RESET__SoftResetAud_MASK; cgs_write_register(adev->acp.cgs_device, mmACP_SOFT_RESET, val); - return 0; } -- cgit v1.2.3 From 9970a8e40d4c39e23d62d32540366d1d7d2cce9b Mon Sep 17 00:00:00 2001 From: Taehee Yoo Date: Tue, 10 Jul 2018 23:21:08 +0900 Subject: netfilter: nft_set_hash: add rcu_barrier() in the nft_rhash_destroy() GC of set uses call_rcu() to destroy elements. So that elements would be destroyed after destroying sets and chains. But, elements should be destroyed before destroying sets and chains. In order to wait calling call_rcu(), a rcu_barrier() is added. In order to test correctly, below patch should be applied. https://patchwork.ozlabs.org/patch/940883/ test scripts: %cat test.nft table ip aa { map map1 { type ipv4_addr : verdict; flags timeout; elements = { 0 : jump a0, 1 : jump a0, 2 : jump a0, 3 : jump a0, 4 : jump a0, 5 : jump a0, 6 : jump a0, 7 : jump a0, 8 : jump a0, 9 : jump a0, } timeout 1s; } chain a0 { } } flush ruleset [ ... ] table ip aa { map map1 { type ipv4_addr : verdict; flags timeout; elements = { 0 : jump a0, 1 : jump a0, 2 : jump a0, 3 : jump a0, 4 : jump a0, 5 : jump a0, 6 : jump a0, 7 : jump a0, 8 : jump a0, 9 : jump a0, } timeout 1s; } chain a0 { } } flush ruleset Splat looks like: [ 200.795603] kernel BUG at net/netfilter/nf_tables_api.c:1363! [ 200.806944] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 200.812253] CPU: 1 PID: 1582 Comm: nft Not tainted 4.17.0+ #24 [ 200.820297] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 07/08/2015 [ 200.830309] RIP: 0010:nf_tables_chain_destroy.isra.34+0x62/0x240 [nf_tables] [ 200.838317] Code: 43 50 85 c0 74 26 48 8b 45 00 48 8b 4d 08 ba 54 05 00 00 48 c7 c6 60 6d 29 c0 48 c7 c7 c0 65 29 c0 4c 8b 40 08 e8 58 e5 fd f8 <0f> 0b 48 89 da 48 b8 00 00 00 00 00 fc ff [ 200.860366] RSP: 0000:ffff880118dbf4d0 EFLAGS: 00010282 [ 200.866354] RAX: 0000000000000061 RBX: ffff88010cdeaf08 RCX: 0000000000000000 [ 200.874355] RDX: 0000000000000061 RSI: 0000000000000008 RDI: ffffed00231b7e90 [ 200.882361] RBP: ffff880118dbf4e8 R08: ffffed002373bcfb R09: ffffed002373bcfa [ 200.890354] R10: 0000000000000000 R11: ffffed002373bcfb R12: dead000000000200 [ 200.898356] R13: dead000000000100 R14: ffffffffbb62af38 R15: dffffc0000000000 [ 200.906354] FS: 00007fefc31fd700(0000) GS:ffff88011b800000(0000) knlGS:0000000000000000 [ 200.915533] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 200.922355] CR2: 0000557f1c8e9128 CR3: 0000000106880000 CR4: 00000000001006e0 [ 200.930353] Call Trace: [ 200.932351] ? nf_tables_commit+0x26f6/0x2c60 [nf_tables] [ 200.939525] ? nf_tables_setelem_notify.constprop.49+0x1a0/0x1a0 [nf_tables] [ 200.947525] ? nf_tables_delchain+0x6e0/0x6e0 [nf_tables] [ 200.952383] ? nft_add_set_elem+0x1700/0x1700 [nf_tables] [ 200.959532] ? nla_parse+0xab/0x230 [ 200.963529] ? nfnetlink_rcv_batch+0xd06/0x10d0 [nfnetlink] [ 200.968384] ? nfnetlink_net_init+0x130/0x130 [nfnetlink] [ 200.975525] ? debug_show_all_locks+0x290/0x290 [ 200.980363] ? debug_show_all_locks+0x290/0x290 [ 200.986356] ? sched_clock_cpu+0x132/0x170 [ 200.990352] ? find_held_lock+0x39/0x1b0 [ 200.994355] ? sched_clock_local+0x10d/0x130 [ 200.999531] ? memset+0x1f/0x40 Fixes: 9d0982927e79 ("netfilter: nft_hash: add support for timeouts") Signed-off-by: Taehee Yoo Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nft_set_hash.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/netfilter/nft_set_hash.c b/net/netfilter/nft_set_hash.c index 72ef35b51cac..90c3e7e6cacb 100644 --- a/net/netfilter/nft_set_hash.c +++ b/net/netfilter/nft_set_hash.c @@ -387,6 +387,7 @@ static void nft_rhash_destroy(const struct nft_set *set) struct nft_rhash *priv = nft_set_priv(set); cancel_delayed_work_sync(&priv->gc_work); + rcu_barrier(); rhashtable_free_and_destroy(&priv->ht, nft_rhash_elem_destroy, (void *)set); } -- cgit v1.2.3 From c293ac959f809ee1cd31609d9e62bccf6804b2e6 Mon Sep 17 00:00:00 2001 From: Taehee Yoo Date: Tue, 10 Jul 2018 23:22:01 +0900 Subject: netfilter: nft_set_rbtree: fix panic when destroying set by GC This patch fixes below. 1. check null pointer of rb_next. rb_next can return null. so null check routine should be added. 2. add rcu_barrier in destroy routine. GC uses call_rcu to remove elements. but all elements should be removed before destroying set and chains. so that rcu_barrier is added. test script: %cat test.nft table inet aa { map map1 { type ipv4_addr : verdict; flags interval, timeout; elements = { 0-1 : jump a0, 3-4 : jump a0, 6-7 : jump a0, 9-10 : jump a0, 12-13 : jump a0, 15-16 : jump a0, 18-19 : jump a0, 21-22 : jump a0, 24-25 : jump a0, 27-28 : jump a0, } timeout 1s; } chain a0 { } } flush ruleset table inet aa { map map1 { type ipv4_addr : verdict; flags interval, timeout; elements = { 0-1 : jump a0, 3-4 : jump a0, 6-7 : jump a0, 9-10 : jump a0, 12-13 : jump a0, 15-16 : jump a0, 18-19 : jump a0, 21-22 : jump a0, 24-25 : jump a0, 27-28 : jump a0, } timeout 1s; } chain a0 { } } flush ruleset splat looks like: [ 2402.419838] kasan: GPF could be caused by NULL-ptr deref or user memory access [ 2402.428433] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 2402.429343] CPU: 1 PID: 1350 Comm: kworker/1:1 Not tainted 4.18.0-rc2+ #1 [ 2402.429343] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 03/23/2017 [ 2402.429343] Workqueue: events_power_efficient nft_rbtree_gc [nft_set_rbtree] [ 2402.429343] RIP: 0010:rb_next+0x1e/0x130 [ 2402.429343] Code: e9 de f2 ff ff 0f 1f 80 00 00 00 00 41 55 48 89 fa 41 54 55 53 48 c1 ea 03 48 b8 00 00 00 0 [ 2402.429343] RSP: 0018:ffff880105f77678 EFLAGS: 00010296 [ 2402.429343] RAX: dffffc0000000000 RBX: ffff8801143e3428 RCX: 1ffff1002287c69c [ 2402.429343] RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000000 [ 2402.429343] RBP: 0000000000000000 R08: ffffed0016aabc24 R09: ffffed0016aabc24 [ 2402.429343] R10: 0000000000000001 R11: ffffed0016aabc23 R12: 0000000000000000 [ 2402.429343] R13: ffff8800b6933388 R14: dffffc0000000000 R15: ffff8801143e3440 [ 2402.534486] kasan: CONFIG_KASAN_INLINE enabled [ 2402.534212] FS: 0000000000000000(0000) GS:ffff88011b600000(0000) knlGS:0000000000000000 [ 2402.534212] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2402.534212] CR2: 0000000000863008 CR3: 00000000a3c16000 CR4: 00000000001006e0 [ 2402.534212] Call Trace: [ 2402.534212] nft_rbtree_gc+0x2b5/0x5f0 [nft_set_rbtree] [ 2402.534212] process_one_work+0xc1b/0x1ee0 [ 2402.540329] kasan: GPF could be caused by NULL-ptr deref or user memory access [ 2402.534212] ? _raw_spin_unlock_irq+0x29/0x40 [ 2402.534212] ? pwq_dec_nr_in_flight+0x3e0/0x3e0 [ 2402.534212] ? set_load_weight+0x270/0x270 [ 2402.534212] ? __schedule+0x6ea/0x1fb0 [ 2402.534212] ? __sched_text_start+0x8/0x8 [ 2402.534212] ? save_trace+0x320/0x320 [ 2402.534212] ? sched_clock_local+0xe2/0x150 [ 2402.534212] ? find_held_lock+0x39/0x1c0 [ 2402.534212] ? worker_thread+0x35f/0x1150 [ 2402.534212] ? lock_contended+0xe90/0xe90 [ 2402.534212] ? __lock_acquire+0x4520/0x4520 [ 2402.534212] ? do_raw_spin_unlock+0xb1/0x350 [ 2402.534212] ? do_raw_spin_trylock+0x111/0x1b0 [ 2402.534212] ? do_raw_spin_lock+0x1f0/0x1f0 [ 2402.534212] worker_thread+0x169/0x1150 Fixes: 8d8540c4f5e0("netfilter: nft_set_rbtree: add timeout support") Signed-off-by: Taehee Yoo Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nft_set_rbtree.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/net/netfilter/nft_set_rbtree.c b/net/netfilter/nft_set_rbtree.c index 1f8f257cb518..9873d734b494 100644 --- a/net/netfilter/nft_set_rbtree.c +++ b/net/netfilter/nft_set_rbtree.c @@ -381,7 +381,7 @@ static void nft_rbtree_gc(struct work_struct *work) gcb = nft_set_gc_batch_check(set, gcb, GFP_ATOMIC); if (!gcb) - goto out; + break; atomic_dec(&set->nelems); nft_set_gc_batch_add(gcb, rbe); @@ -390,10 +390,12 @@ static void nft_rbtree_gc(struct work_struct *work) rbe = rb_entry(prev, struct nft_rbtree_elem, node); atomic_dec(&set->nelems); nft_set_gc_batch_add(gcb, rbe); + prev = NULL; } node = rb_next(node); + if (!node) + break; } -out: if (gcb) { for (i = 0; i < gcb->head.cnt; i++) { rbe = gcb->elems[i]; @@ -440,6 +442,7 @@ static void nft_rbtree_destroy(const struct nft_set *set) struct rb_node *node; cancel_delayed_work_sync(&priv->gc_work); + rcu_barrier(); while ((node = priv->root.rb_node) != NULL) { rb_erase(node, &priv->root); rbe = rb_entry(node, struct nft_rbtree_elem, node); -- cgit v1.2.3 From 83ed7d1fe2d2d4a11b30660dec20168bb473d9c1 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 18 Jul 2018 10:48:56 +0200 Subject: ipv6: ila: select CONFIG_DST_CACHE My randconfig builds came across an old missing dependency for ILA: ERROR: "dst_cache_set_ip6" [net/ipv6/ila/ila.ko] undefined! ERROR: "dst_cache_get" [net/ipv6/ila/ila.ko] undefined! ERROR: "dst_cache_init" [net/ipv6/ila/ila.ko] undefined! ERROR: "dst_cache_destroy" [net/ipv6/ila/ila.ko] undefined! We almost never run into this by accident because randconfig builds end up selecting DST_CACHE from some other tunnel protocol, and this one appears to be the only one missing the explicit 'select'. >From all I can tell, this problem first appeared in linux-4.9 when dst_cache support got added to ILA. Fixes: 79ff2fc31e0f ("ila: Cache a route to translated address") Cc: Tom Herbert Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller --- net/ipv6/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv6/Kconfig b/net/ipv6/Kconfig index 0eff75525da1..b3885ca22d6f 100644 --- a/net/ipv6/Kconfig +++ b/net/ipv6/Kconfig @@ -108,6 +108,7 @@ config IPV6_MIP6 config IPV6_ILA tristate "IPv6: Identifier Locator Addressing (ILA)" depends on NETFILTER + select DST_CACHE select LWTUNNEL ---help--- Support for IPv6 Identifier Locator Addressing (ILA). -- cgit v1.2.3 From 384cf4285b34e08917e3e66603382f2b0c4f6e1b Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Wed, 18 Jul 2018 17:24:35 +0000 Subject: Input: i8042 - add Lenovo LaVie Z to the i8042 reset list The Lenovo LaVie Z laptop requires i8042 to be reset in order to consistently detect its Elantech touchpad. The nomux and kbdreset quirks are not sufficient. It's possible the other LaVie Z models from NEC require this as well. Cc: stable@vger.kernel.org Signed-off-by: Chen-Yu Tsai Signed-off-by: Dmitry Torokhov --- drivers/input/serio/i8042-x86ia64io.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index b353d494ad40..136f6e7bf797 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -527,6 +527,13 @@ static const struct dmi_system_id __initconst i8042_dmi_nomux_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "N24_25BU"), }, }, + { + /* Lenovo LaVie Z */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo LaVie Z"), + }, + }, { } }; -- cgit v1.2.3 From 3bc53be9db21040b5d2de4d455f023c8c494aa68 Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Wed, 18 Jul 2018 18:57:27 +0900 Subject: net/nfc: Avoid stalls when nfc_alloc_send_skb() returned NULL. syzbot is reporting stalls at nfc_llcp_send_ui_frame() [1]. This is because nfc_llcp_send_ui_frame() is retrying the loop without any delay when nonblocking nfc_alloc_send_skb() returned NULL. Since there is no need to use MSG_DONTWAIT if we retry until sock_alloc_send_pskb() succeeds, let's use blocking call. Also, in case an unexpected error occurred, let's break the loop if blocking nfc_alloc_send_skb() failed. [1] https://syzkaller.appspot.com/bug?id=4a131cc571c3733e0eff6bc673f4e36ae48f19c6 Signed-off-by: Tetsuo Handa Reported-by: syzbot Signed-off-by: David S. Miller --- net/nfc/llcp_commands.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/net/nfc/llcp_commands.c b/net/nfc/llcp_commands.c index 2ceefa183cee..6a196e438b6c 100644 --- a/net/nfc/llcp_commands.c +++ b/net/nfc/llcp_commands.c @@ -752,11 +752,14 @@ int nfc_llcp_send_ui_frame(struct nfc_llcp_sock *sock, u8 ssap, u8 dsap, pr_debug("Fragment %zd bytes remaining %zd", frag_len, remaining_len); - pdu = nfc_alloc_send_skb(sock->dev, &sock->sk, MSG_DONTWAIT, + pdu = nfc_alloc_send_skb(sock->dev, &sock->sk, 0, frag_len + LLCP_HEADER_SIZE, &err); if (pdu == NULL) { - pr_err("Could not allocate PDU\n"); - continue; + pr_err("Could not allocate PDU (error=%d)\n", err); + len -= remaining_len; + if (len == 0) + len = err; + break; } pdu = llcp_add_header(pdu, dsap, ssap, LLCP_PDU_UI); -- cgit v1.2.3 From 99be51f11d51400f744632f3938445a8d4de8943 Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Wed, 18 Jul 2018 15:22:49 +0200 Subject: net/smc: optimize consumer cursor updates The SMC protocol requires to send a separate consumer cursor update, if it cannot be piggybacked to updates of the producer cursor. Currently the decision to send a separate consumer cursor update just considers the amount of data already received by the socket program. It does not consider the amount of data already arrived, but not yet consumed by the receiver. Basing the decision on the difference between already confirmed and already arrived data (instead of difference between already confirmed and already consumed data), may lead to a somewhat earlier consumer cursor update send in fast unidirectional traffic scenarios, and thus to better throughput. Signed-off-by: Ursula Braun Suggested-by: Thomas Richter Signed-off-by: David S. Miller --- net/smc/smc_tx.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/net/smc/smc_tx.c b/net/smc/smc_tx.c index cee666400752..f82886b7d1d8 100644 --- a/net/smc/smc_tx.c +++ b/net/smc/smc_tx.c @@ -495,7 +495,8 @@ out: void smc_tx_consumer_update(struct smc_connection *conn, bool force) { - union smc_host_cursor cfed, cons; + union smc_host_cursor cfed, cons, prod; + int sender_free = conn->rmb_desc->len; int to_confirm; smc_curs_write(&cons, @@ -505,11 +506,18 @@ void smc_tx_consumer_update(struct smc_connection *conn, bool force) smc_curs_read(&conn->rx_curs_confirmed, conn), conn); to_confirm = smc_curs_diff(conn->rmb_desc->len, &cfed, &cons); + if (to_confirm > conn->rmbe_update_limit) { + smc_curs_write(&prod, + smc_curs_read(&conn->local_rx_ctrl.prod, conn), + conn); + sender_free = conn->rmb_desc->len - + smc_curs_diff(conn->rmb_desc->len, &prod, &cfed); + } if (conn->local_rx_ctrl.prod_flags.cons_curs_upd_req || force || ((to_confirm > conn->rmbe_update_limit) && - ((to_confirm > (conn->rmb_desc->len / 2)) || + ((sender_free <= (conn->rmb_desc->len / 2)) || conn->local_rx_ctrl.prod_flags.write_blocked))) { if ((smc_cdc_get_slot_and_msg_send(conn) < 0) && conn->alert_token_local) { /* connection healthy */ -- cgit v1.2.3 From ac0107edba253a6e58e923f9e68825decef3e681 Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Wed, 18 Jul 2018 15:22:50 +0200 Subject: net/smc: add error handling for get_user() For security reasons the return code of get_user() should always be checked. Fixes: 01d2f7e2cdd31 ("net/smc: sockopts TCP_NODELAY and TCP_CORK") Reported-by: Heiko Carstens Signed-off-by: Ursula Braun Signed-off-by: David S. Miller --- net/smc/af_smc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c index c12a7fc18f56..6e5479067db0 100644 --- a/net/smc/af_smc.c +++ b/net/smc/af_smc.c @@ -1456,7 +1456,8 @@ static int smc_setsockopt(struct socket *sock, int level, int optname, if (optlen < sizeof(int)) return -EINVAL; - get_user(val, (int __user *)optval); + if (get_user(val, (int __user *)optval)) + return -EFAULT; lock_sock(sk); switch (optname) { -- cgit v1.2.3 From f6bdc42f021194ec095914b92c7a8b1a09789e6d Mon Sep 17 00:00:00 2001 From: Karsten Graul Date: Wed, 18 Jul 2018 15:22:51 +0200 Subject: net/smc: reset recv timeout after clc handshake During clc handshake the receive timeout is set to CLC_WAIT_TIME. Remember and reset the original timeout value after the receive calls, and remove a duplicate assignment of CLC_WAIT_TIME. Signed-off-by: Karsten Graul Signed-off-by: Ursula Braun Signed-off-by: David S. Miller --- net/smc/smc_clc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/smc/smc_clc.c b/net/smc/smc_clc.c index 717449b1da0b..ae5d168653ce 100644 --- a/net/smc/smc_clc.c +++ b/net/smc/smc_clc.c @@ -250,6 +250,7 @@ out: int smc_clc_wait_msg(struct smc_sock *smc, void *buf, int buflen, u8 expected_type) { + long rcvtimeo = smc->clcsock->sk->sk_rcvtimeo; struct sock *clc_sk = smc->clcsock->sk; struct smc_clc_msg_hdr *clcm = buf; struct msghdr msg = {NULL, 0}; @@ -306,7 +307,6 @@ int smc_clc_wait_msg(struct smc_sock *smc, void *buf, int buflen, memset(&msg, 0, sizeof(struct msghdr)); iov_iter_kvec(&msg.msg_iter, READ | ITER_KVEC, &vec, 1, datlen); krflags = MSG_WAITALL; - smc->clcsock->sk->sk_rcvtimeo = CLC_WAIT_TIME; len = sock_recvmsg(smc->clcsock, &msg, krflags); if (len < datlen || !smc_clc_msg_hdr_valid(clcm)) { smc->sk.sk_err = EPROTO; @@ -322,6 +322,7 @@ int smc_clc_wait_msg(struct smc_sock *smc, void *buf, int buflen, } out: + smc->clcsock->sk->sk_rcvtimeo = rcvtimeo; return reason_code; } -- cgit v1.2.3 From 0e714d27786ce1fb3efa9aac58abc096e68b1c2a Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Tue, 17 Jul 2018 12:39:00 -0500 Subject: vfio/pci: Fix potential Spectre v1 info.index can be indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/vfio/pci/vfio_pci.c:734 vfio_pci_ioctl() warn: potential spectre issue 'vdev->region' Fix this by sanitizing info.index before indirectly using it to index vdev->region Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva Signed-off-by: Alex Williamson --- drivers/vfio/pci/vfio_pci.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c index b423a309a6e0..125b58eff936 100644 --- a/drivers/vfio/pci/vfio_pci.c +++ b/drivers/vfio/pci/vfio_pci.c @@ -28,6 +28,7 @@ #include #include #include +#include #include "vfio_pci_private.h" @@ -727,6 +728,9 @@ static long vfio_pci_ioctl(void *device_data, if (info.index >= VFIO_PCI_NUM_REGIONS + vdev->num_regions) return -EINVAL; + info.index = array_index_nospec(info.index, + VFIO_PCI_NUM_REGIONS + + vdev->num_regions); i = info.index - VFIO_PCI_NUM_REGIONS; -- cgit v1.2.3 From 107d01f5ba10f4162c38109496607eb197059064 Mon Sep 17 00:00:00 2001 From: Davidlohr Bueso Date: Mon, 16 Jul 2018 13:26:13 -0700 Subject: lib/rhashtable: consider param->min_size when setting initial table size rhashtable_init() currently does not take into account the user-passed min_size parameter unless param->nelem_hint is set as well. As such, the default size (number of buckets) will always be HASH_DEFAULT_SIZE even if the smallest allowed size is larger than that. Remediate this by unconditionally calling into rounded_hashtable_size() and handling things accordingly. Signed-off-by: Davidlohr Bueso Acked-by: Herbert Xu Signed-off-by: David S. Miller --- lib/rhashtable.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/lib/rhashtable.c b/lib/rhashtable.c index 0183d07a9b4d..e5c8586cf717 100644 --- a/lib/rhashtable.c +++ b/lib/rhashtable.c @@ -964,8 +964,16 @@ EXPORT_SYMBOL_GPL(rhashtable_walk_stop); static size_t rounded_hashtable_size(const struct rhashtable_params *params) { - return max(roundup_pow_of_two(params->nelem_hint * 4 / 3), - (unsigned long)params->min_size); + size_t retsize; + + if (params->nelem_hint) + retsize = max(roundup_pow_of_two(params->nelem_hint * 4 / 3), + (unsigned long)params->min_size); + else + retsize = max(HASH_DEFAULT_SIZE, + (unsigned long)params->min_size); + + return retsize; } static u32 rhashtable_jhash2(const void *key, u32 length, u32 seed) @@ -1022,8 +1030,6 @@ int rhashtable_init(struct rhashtable *ht, struct bucket_table *tbl; size_t size; - size = HASH_DEFAULT_SIZE; - if ((!params->key_len && !params->obj_hashfn) || (params->obj_hashfn && !params->obj_cmpfn)) return -EINVAL; @@ -1050,8 +1056,7 @@ int rhashtable_init(struct rhashtable *ht, ht->p.min_size = max_t(u16, ht->p.min_size, HASH_MIN_SIZE); - if (params->nelem_hint) - size = rounded_hashtable_size(&ht->p); + size = rounded_hashtable_size(&ht->p); if (params->locks_mul) ht->p.locks_mul = roundup_pow_of_two(params->locks_mul); -- cgit v1.2.3 From 676bcfece19f83621e905aa55b5ed2d45cc4f2d3 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Mon, 16 Jul 2018 20:59:58 -0500 Subject: net: cxgb3_main: fix potential Spectre v1 t.qset_idx can be indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c:2286 cxgb_extension_ioctl() warn: potential spectre issue 'adapter->msix_info' Fix this by sanitizing t.qset_idx before using it to index adapter->msix_info Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c index 7b795edd9d3a..a19172dbe6be 100644 --- a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c +++ b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c @@ -51,6 +51,7 @@ #include #include #include +#include #include "common.h" #include "cxgb3_ioctl.h" @@ -2268,6 +2269,7 @@ static int cxgb_extension_ioctl(struct net_device *dev, void __user *useraddr) if (t.qset_idx >= nqsets) return -EINVAL; + t.qset_idx = array_index_nospec(t.qset_idx, nqsets); q = &adapter->params.sge.qset[q1 + t.qset_idx]; t.rspq_size = q->rspq_size; -- cgit v1.2.3 From a5fb9fb023a1435f2b42bccd7f547560f3a21dc3 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 18 Jul 2018 15:40:26 -0500 Subject: PCI: OF: Fix I/O space page leak When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY driver was left disabled, the kernel crashed with this BUG: kernel BUG at lib/ioremap.c:72! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092 Hardware name: Renesas Condor board based on r8a77980 (DT) Workqueue: events deferred_probe_work_func pstate: 80000005 (Nzcv daif -PAN -UAO) pc : ioremap_page_range+0x370/0x3c8 lr : ioremap_page_range+0x40/0x3c8 sp : ffff000008da39e0 x29: ffff000008da39e0 x28: 00e8000000000f07 x27: ffff7dfffee00000 x26: 0140000000000000 x25: ffff7dfffef00000 x24: 00000000000fe100 x23: ffff80007b906000 x22: ffff000008ab8000 x21: ffff000008bb1d58 x20: ffff7dfffef00000 x19: ffff800009c30fb8 x18: 0000000000000001 x17: 00000000000152d0 x16: 00000000014012d0 x15: 0000000000000000 x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720 x11: 0720072007300730 x10: 00000000000000ae x9 : 0000000000000000 x8 : ffff7dffff000000 x7 : 0000000000000000 x6 : 0000000000000100 x5 : 0000000000000000 x4 : 000000007b906000 x3 : ffff80007c61a880 x2 : ffff7dfffeefffff x1 : 0000000040000000 x0 : 00e80000fe100f07 Process kworker/0:1 (pid: 39, stack limit = 0x (ptrval)) Call trace: ioremap_page_range+0x370/0x3c8 pci_remap_iospace+0x7c/0xac pci_parse_request_of_pci_ranges+0x13c/0x190 rcar_pcie_probe+0x4c/0xb04 platform_drv_probe+0x50/0xbc driver_probe_device+0x21c/0x308 __device_attach_driver+0x98/0xc8 bus_for_each_drv+0x54/0x94 __device_attach+0xc4/0x12c device_initial_probe+0x10/0x18 bus_probe_device+0x90/0x98 deferred_probe_work_func+0xb0/0x150 process_one_work+0x12c/0x29c worker_thread+0x200/0x3fc kthread+0x108/0x134 ret_from_fork+0x10/0x18 Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000) It turned out that pci_remap_iospace() wasn't undone when the driver's probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER, the probe was retried, finally causing the BUG due to trying to remap already remapped pages. Introduce the devm_pci_remap_iospace() managed API and replace the pci_remap_iospace() call with it to fix the bug. Fixes: dbf9826d5797 ("PCI: generic: Convert to DT resource parsing API") Signed-off-by: Sergei Shtylyov [lorenzo.pieralisi@arm.com: split commit/updated the commit log] Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Reviewed-by: Linus Walleij --- drivers/pci/of.c | 2 +- drivers/pci/pci.c | 38 ++++++++++++++++++++++++++++++++++++++ include/linux/pci.h | 2 ++ 3 files changed, 41 insertions(+), 1 deletion(-) diff --git a/drivers/pci/of.c b/drivers/pci/of.c index d088c9147f10..69a60d6ebd73 100644 --- a/drivers/pci/of.c +++ b/drivers/pci/of.c @@ -612,7 +612,7 @@ int pci_parse_request_of_pci_ranges(struct device *dev, switch (resource_type(res)) { case IORESOURCE_IO: - err = pci_remap_iospace(res, iobase); + err = devm_pci_remap_iospace(dev, res, iobase); if (err) { dev_warn(dev, "error %d: failed to map resource %pR\n", err, res); diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 97acba712e4e..316496e99da9 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -3579,6 +3579,44 @@ void pci_unmap_iospace(struct resource *res) } EXPORT_SYMBOL(pci_unmap_iospace); +static void devm_pci_unmap_iospace(struct device *dev, void *ptr) +{ + struct resource **res = ptr; + + pci_unmap_iospace(*res); +} + +/** + * devm_pci_remap_iospace - Managed pci_remap_iospace() + * @dev: Generic device to remap IO address for + * @res: Resource describing the I/O space + * @phys_addr: physical address of range to be mapped + * + * Managed pci_remap_iospace(). Map is automatically unmapped on driver + * detach. + */ +int devm_pci_remap_iospace(struct device *dev, const struct resource *res, + phys_addr_t phys_addr) +{ + const struct resource **ptr; + int error; + + ptr = devres_alloc(devm_pci_unmap_iospace, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return -ENOMEM; + + error = pci_remap_iospace(res, phys_addr); + if (error) { + devres_free(ptr); + } else { + *ptr = res; + devres_add(dev, ptr); + } + + return error; +} +EXPORT_SYMBOL(devm_pci_remap_iospace); + /** * devm_pci_remap_cfgspace - Managed pci_remap_cfgspace() * @dev: Generic device to remap IO address for diff --git a/include/linux/pci.h b/include/linux/pci.h index 340029b2fb38..abd5d5e17aee 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1240,6 +1240,8 @@ int pci_register_io_range(struct fwnode_handle *fwnode, phys_addr_t addr, unsigned long pci_address_to_pio(phys_addr_t addr); phys_addr_t pci_pio_to_address(unsigned long pio); int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr); +int devm_pci_remap_iospace(struct device *dev, const struct resource *res, + phys_addr_t phys_addr); void pci_unmap_iospace(struct resource *res); void __iomem *devm_pci_remap_cfgspace(struct device *dev, resource_size_t offset, -- cgit v1.2.3 From 5c968f48021a9b3faa61ac2543cfab32461c0e05 Mon Sep 17 00:00:00 2001 From: Alexander Couzens Date: Tue, 17 Jul 2018 13:17:09 +0200 Subject: net: usb: asix: replace mii_nway_restart in resume path mii_nway_restart is not pm aware which results in a rtnl deadlock. Implement mii_nway_restart manual by setting BMCR_ANRESTART if BMCR_ANENABLE is set. To reproduce: * plug an asix based usb network interface * wait until the device enters PM (~5 sec) * `ip link set eth1 up` will never return Fixes: d9fe64e51114 ("net: asix: Add in_pm parameter") Signed-off-by: Alexander Couzens Signed-off-by: David S. Miller --- drivers/net/usb/asix_devices.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c index 3d4f7959dabb..b1b3d8f7e67d 100644 --- a/drivers/net/usb/asix_devices.c +++ b/drivers/net/usb/asix_devices.c @@ -642,10 +642,12 @@ static void ax88772_restore_phy(struct usbnet *dev) priv->presvd_phy_advertise); /* Restore BMCR */ + if (priv->presvd_phy_bmcr & BMCR_ANENABLE) + priv->presvd_phy_bmcr |= BMCR_ANRESTART; + asix_mdio_write_nopm(dev->net, dev->mii.phy_id, MII_BMCR, priv->presvd_phy_bmcr); - mii_nway_restart(&dev->mii); priv->presvd_phy_advertise = 0; priv->presvd_phy_bmcr = 0; } -- cgit v1.2.3 From 53189183909f392c2aff1177565eabbfc48b8524 Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Tue, 17 Jul 2018 20:58:14 +0800 Subject: net: sched: Using NULL instead of plain integer Fixes the following sparse warnings: net/sched/cls_api.c:1101:43: warning: Using plain integer as NULL pointer net/sched/cls_api.c:1492:75: warning: Using plain integer as NULL pointer Signed-off-by: YueHaibing Signed-off-by: David S. Miller --- net/sched/cls_api.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c index cdc3c87c53e6..f74513a7c7a8 100644 --- a/net/sched/cls_api.c +++ b/net/sched/cls_api.c @@ -1053,7 +1053,7 @@ static void tfilter_notify_chain(struct net *net, struct sk_buff *oskb, for (tp = rtnl_dereference(chain->filter_chain); tp; tp = rtnl_dereference(tp->next)) tfilter_notify(net, oskb, n, tp, block, - q, parent, 0, event, false); + q, parent, NULL, event, false); } static int tc_new_tfilter(struct sk_buff *skb, struct nlmsghdr *n, @@ -1444,7 +1444,7 @@ static bool tcf_chain_dump(struct tcf_chain *chain, struct Qdisc *q, u32 parent, memset(&cb->args[1], 0, sizeof(cb->args) - sizeof(cb->args[0])); if (cb->args[1] == 0) { - if (tcf_fill_node(net, skb, tp, block, q, parent, 0, + if (tcf_fill_node(net, skb, tp, block, q, parent, NULL, NETLINK_CB(cb->skb).portid, cb->nlh->nlmsg_seq, NLM_F_MULTI, RTM_NEWTFILTER) <= 0) -- cgit v1.2.3 From 925652d03589084850023d8924b376b7ee3c1b1b Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 18 Jul 2018 15:40:34 -0500 Subject: PCI: xgene: Fix I/O space page leak When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY driver was left disabled, the kernel crashed with this BUG: kernel BUG at lib/ioremap.c:72! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092 Hardware name: Renesas Condor board based on r8a77980 (DT) Workqueue: events deferred_probe_work_func pstate: 80000005 (Nzcv daif -PAN -UAO) pc : ioremap_page_range+0x370/0x3c8 lr : ioremap_page_range+0x40/0x3c8 sp : ffff000008da39e0 x29: ffff000008da39e0 x28: 00e8000000000f07 x27: ffff7dfffee00000 x26: 0140000000000000 x25: ffff7dfffef00000 x24: 00000000000fe100 x23: ffff80007b906000 x22: ffff000008ab8000 x21: ffff000008bb1d58 x20: ffff7dfffef00000 x19: ffff800009c30fb8 x18: 0000000000000001 x17: 00000000000152d0 x16: 00000000014012d0 x15: 0000000000000000 x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720 x11: 0720072007300730 x10: 00000000000000ae x9 : 0000000000000000 x8 : ffff7dffff000000 x7 : 0000000000000000 x6 : 0000000000000100 x5 : 0000000000000000 x4 : 000000007b906000 x3 : ffff80007c61a880 x2 : ffff7dfffeefffff x1 : 0000000040000000 x0 : 00e80000fe100f07 Process kworker/0:1 (pid: 39, stack limit = 0x (ptrval)) Call trace: ioremap_page_range+0x370/0x3c8 pci_remap_iospace+0x7c/0xac pci_parse_request_of_pci_ranges+0x13c/0x190 rcar_pcie_probe+0x4c/0xb04 platform_drv_probe+0x50/0xbc driver_probe_device+0x21c/0x308 __device_attach_driver+0x98/0xc8 bus_for_each_drv+0x54/0x94 __device_attach+0xc4/0x12c device_initial_probe+0x10/0x18 bus_probe_device+0x90/0x98 deferred_probe_work_func+0xb0/0x150 process_one_work+0x12c/0x29c worker_thread+0x200/0x3fc kthread+0x108/0x134 ret_from_fork+0x10/0x18 Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000) It turned out that pci_remap_iospace() wasn't undone when the driver's probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER, the probe was retried, finally causing the BUG due to trying to remap already remapped pages. The X-Gene PCI controller driver has the same issue. Replace pci_remap_iospace() with the devm_ managed version so that the pages get unmapped automagically on any probe failure. Fixes: 5f6b6ccdbe1c ("PCI: xgene: Add APM X-Gene PCIe driver") Signed-off-by: Sergei Shtylyov [lorenzo.pieralisi@arm.com: updated the commit log] Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Reviewed-by: Linus Walleij --- drivers/pci/controller/pci-xgene.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/controller/pci-xgene.c b/drivers/pci/controller/pci-xgene.c index d854d67e873c..ffda3e8b4742 100644 --- a/drivers/pci/controller/pci-xgene.c +++ b/drivers/pci/controller/pci-xgene.c @@ -423,7 +423,7 @@ static int xgene_pcie_map_ranges(struct xgene_pcie_port *port, case IORESOURCE_IO: xgene_pcie_setup_ob_reg(port, res, OMR3BARL, io_base, res->start - window->offset); - ret = pci_remap_iospace(res, io_base); + ret = devm_pci_remap_iospace(dev, res, io_base); if (ret < 0) return ret; break; -- cgit v1.2.3 From 0018b265adf7e251f90d3ca1c7c0e32e2a0ad262 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 18 Jul 2018 15:40:40 -0500 Subject: PCI: versatile: Fix I/O space page leak When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY driver was left disabled, the kernel crashed with this BUG: kernel BUG at lib/ioremap.c:72! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092 Hardware name: Renesas Condor board based on r8a77980 (DT) Workqueue: events deferred_probe_work_func pstate: 80000005 (Nzcv daif -PAN -UAO) pc : ioremap_page_range+0x370/0x3c8 lr : ioremap_page_range+0x40/0x3c8 sp : ffff000008da39e0 x29: ffff000008da39e0 x28: 00e8000000000f07 x27: ffff7dfffee00000 x26: 0140000000000000 x25: ffff7dfffef00000 x24: 00000000000fe100 x23: ffff80007b906000 x22: ffff000008ab8000 x21: ffff000008bb1d58 x20: ffff7dfffef00000 x19: ffff800009c30fb8 x18: 0000000000000001 x17: 00000000000152d0 x16: 00000000014012d0 x15: 0000000000000000 x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720 x11: 0720072007300730 x10: 00000000000000ae x9 : 0000000000000000 x8 : ffff7dffff000000 x7 : 0000000000000000 x6 : 0000000000000100 x5 : 0000000000000000 x4 : 000000007b906000 x3 : ffff80007c61a880 x2 : ffff7dfffeefffff x1 : 0000000040000000 x0 : 00e80000fe100f07 Process kworker/0:1 (pid: 39, stack limit = 0x (ptrval)) Call trace: ioremap_page_range+0x370/0x3c8 pci_remap_iospace+0x7c/0xac pci_parse_request_of_pci_ranges+0x13c/0x190 rcar_pcie_probe+0x4c/0xb04 platform_drv_probe+0x50/0xbc driver_probe_device+0x21c/0x308 __device_attach_driver+0x98/0xc8 bus_for_each_drv+0x54/0x94 __device_attach+0xc4/0x12c device_initial_probe+0x10/0x18 bus_probe_device+0x90/0x98 deferred_probe_work_func+0xb0/0x150 process_one_work+0x12c/0x29c worker_thread+0x200/0x3fc kthread+0x108/0x134 ret_from_fork+0x10/0x18 Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000) It turned out that pci_remap_iospace() wasn't undone when the driver's probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER, the probe was retried, finally causing the BUG due to trying to remap already remapped pages. The Versatile PCI controller driver has the same issue. Replace pci_remap_iospace() with the devm_ managed version to fix the bug. Fixes: b7e78170efd4 ("PCI: versatile: Add DT-based ARM Versatile PB PCIe host driver") Signed-off-by: Sergei Shtylyov [lorenzo.pieralisi@arm.com: updated the commit log] Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Reviewed-by: Linus Walleij --- drivers/pci/controller/pci-versatile.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/controller/pci-versatile.c b/drivers/pci/controller/pci-versatile.c index 994f32061b32..f59ad2728c0b 100644 --- a/drivers/pci/controller/pci-versatile.c +++ b/drivers/pci/controller/pci-versatile.c @@ -82,7 +82,7 @@ static int versatile_pci_parse_request_of_pci_ranges(struct device *dev, switch (resource_type(res)) { case IORESOURCE_IO: - err = pci_remap_iospace(res, iobase); + err = devm_pci_remap_iospace(dev, res, iobase); if (err) { dev_warn(dev, "error %d: failed to map resource %pR\n", err, res); -- cgit v1.2.3 From fd07f5e19c6fcdfa318944764248cf44eb06e532 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 18 Jul 2018 15:40:46 -0500 Subject: PCI: designware: Fix I/O space page leak When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY driver is left disabled, the kernel crashed with this BUG: kernel BUG at lib/ioremap.c:72! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092 Hardware name: Renesas Condor board based on r8a77980 (DT) Workqueue: events deferred_probe_work_func pstate: 80000005 (Nzcv daif -PAN -UAO) pc : ioremap_page_range+0x370/0x3c8 lr : ioremap_page_range+0x40/0x3c8 sp : ffff000008da39e0 x29: ffff000008da39e0 x28: 00e8000000000f07 x27: ffff7dfffee00000 x26: 0140000000000000 x25: ffff7dfffef00000 x24: 00000000000fe100 x23: ffff80007b906000 x22: ffff000008ab8000 x21: ffff000008bb1d58 x20: ffff7dfffef00000 x19: ffff800009c30fb8 x18: 0000000000000001 x17: 00000000000152d0 x16: 00000000014012d0 x15: 0000000000000000 x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720 x11: 0720072007300730 x10: 00000000000000ae x9 : 0000000000000000 x8 : ffff7dffff000000 x7 : 0000000000000000 x6 : 0000000000000100 x5 : 0000000000000000 x4 : 000000007b906000 x3 : ffff80007c61a880 x2 : ffff7dfffeefffff x1 : 0000000040000000 x0 : 00e80000fe100f07 Process kworker/0:1 (pid: 39, stack limit = 0x (ptrval)) Call trace: ioremap_page_range+0x370/0x3c8 pci_remap_iospace+0x7c/0xac pci_parse_request_of_pci_ranges+0x13c/0x190 rcar_pcie_probe+0x4c/0xb04 platform_drv_probe+0x50/0xbc driver_probe_device+0x21c/0x308 __device_attach_driver+0x98/0xc8 bus_for_each_drv+0x54/0x94 __device_attach+0xc4/0x12c device_initial_probe+0x10/0x18 bus_probe_device+0x90/0x98 deferred_probe_work_func+0xb0/0x150 process_one_work+0x12c/0x29c worker_thread+0x200/0x3fc kthread+0x108/0x134 ret_from_fork+0x10/0x18 Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000) It turned out that pci_remap_iospace() wasn't undone when the driver's probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER, the probe was retried, finally causing the BUG due to trying to remap already remapped pages. The DesignWare PCIe controller driver has the same issue. Replace devm_pci_remap_iospace() with a devm_ managed version to fix the bug. Fixes: cbce7900598c ("PCI: designware: Make driver arch-agnostic") Signed-off-by: Sergei Shtylyov [lorenzo.pieralisi@arm.com: updated the commit log] Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Reviewed-by: Linus Walleij Acked-by: Jingoo Han --- drivers/pci/controller/dwc/pcie-designware-host.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c index 781aa03aeede..29a05759a294 100644 --- a/drivers/pci/controller/dwc/pcie-designware-host.c +++ b/drivers/pci/controller/dwc/pcie-designware-host.c @@ -363,7 +363,8 @@ int dw_pcie_host_init(struct pcie_port *pp) resource_list_for_each_entry_safe(win, tmp, &bridge->windows) { switch (resource_type(win->res)) { case IORESOURCE_IO: - ret = pci_remap_iospace(win->res, pp->io_base); + ret = devm_pci_remap_iospace(dev, win->res, + pp->io_base); if (ret) { dev_warn(dev, "Error %d: failed to map resource %pR\n", ret, win->res); -- cgit v1.2.3 From 1df3e5b3feebf29a3ecfa0c0f06f79544ca573e4 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 18 Jul 2018 15:40:53 -0500 Subject: PCI: aardvark: Fix I/O space page leak When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY driver was left disabled, the kernel crashed with this BUG: kernel BUG at lib/ioremap.c:72! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092 Hardware name: Renesas Condor board based on r8a77980 (DT) Workqueue: events deferred_probe_work_func pstate: 80000005 (Nzcv daif -PAN -UAO) pc : ioremap_page_range+0x370/0x3c8 lr : ioremap_page_range+0x40/0x3c8 sp : ffff000008da39e0 x29: ffff000008da39e0 x28: 00e8000000000f07 x27: ffff7dfffee00000 x26: 0140000000000000 x25: ffff7dfffef00000 x24: 00000000000fe100 x23: ffff80007b906000 x22: ffff000008ab8000 x21: ffff000008bb1d58 x20: ffff7dfffef00000 x19: ffff800009c30fb8 x18: 0000000000000001 x17: 00000000000152d0 x16: 00000000014012d0 x15: 0000000000000000 x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720 x11: 0720072007300730 x10: 00000000000000ae x9 : 0000000000000000 x8 : ffff7dffff000000 x7 : 0000000000000000 x6 : 0000000000000100 x5 : 0000000000000000 x4 : 000000007b906000 x3 : ffff80007c61a880 x2 : ffff7dfffeefffff x1 : 0000000040000000 x0 : 00e80000fe100f07 Process kworker/0:1 (pid: 39, stack limit = 0x (ptrval)) Call trace: ioremap_page_range+0x370/0x3c8 pci_remap_iospace+0x7c/0xac pci_parse_request_of_pci_ranges+0x13c/0x190 rcar_pcie_probe+0x4c/0xb04 platform_drv_probe+0x50/0xbc driver_probe_device+0x21c/0x308 __device_attach_driver+0x98/0xc8 bus_for_each_drv+0x54/0x94 __device_attach+0xc4/0x12c device_initial_probe+0x10/0x18 bus_probe_device+0x90/0x98 deferred_probe_work_func+0xb0/0x150 process_one_work+0x12c/0x29c worker_thread+0x200/0x3fc kthread+0x108/0x134 ret_from_fork+0x10/0x18 Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000) It turned out that pci_remap_iospace() wasn't undone when the driver's probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER, the probe was retried, finally causing the BUG due to trying to remap already remapped pages. The Aardvark PCI controller driver has the same issue. Replace pci_remap_iospace() with its devm_ managed version to fix the bug. Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver") Signed-off-by: Sergei Shtylyov [lorenzo.pieralisi@arm.com: updated the commit log] Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Reviewed-by: Thomas Petazzoni Reviewed-by: Linus Walleij --- drivers/pci/controller/pci-aardvark.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c index d3172d5d3d35..0fae816fba39 100644 --- a/drivers/pci/controller/pci-aardvark.c +++ b/drivers/pci/controller/pci-aardvark.c @@ -849,7 +849,7 @@ static int advk_pcie_parse_request_of_pci_ranges(struct advk_pcie *pcie) 0, 0xF8000000, 0, lower_32_bits(res->start), OB_PCIE_IO); - err = pci_remap_iospace(res, iobase); + err = devm_pci_remap_iospace(dev, res, iobase); if (err) { dev_warn(dev, "error %d: failed to map resource %pR\n", err, res); -- cgit v1.2.3 From e30609454b39139a91faf631685f503b7ea3f27d Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 18 Jul 2018 15:40:59 -0500 Subject: PCI: faraday: Fix I/O space page leak When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY driver was left disabled, the kernel crashed with this BUG: kernel BUG at lib/ioremap.c:72! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092 Hardware name: Renesas Condor board based on r8a77980 (DT) Workqueue: events deferred_probe_work_func pstate: 80000005 (Nzcv daif -PAN -UAO) pc : ioremap_page_range+0x370/0x3c8 lr : ioremap_page_range+0x40/0x3c8 sp : ffff000008da39e0 x29: ffff000008da39e0 x28: 00e8000000000f07 x27: ffff7dfffee00000 x26: 0140000000000000 x25: ffff7dfffef00000 x24: 00000000000fe100 x23: ffff80007b906000 x22: ffff000008ab8000 x21: ffff000008bb1d58 x20: ffff7dfffef00000 x19: ffff800009c30fb8 x18: 0000000000000001 x17: 00000000000152d0 x16: 00000000014012d0 x15: 0000000000000000 x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720 x11: 0720072007300730 x10: 00000000000000ae x9 : 0000000000000000 x8 : ffff7dffff000000 x7 : 0000000000000000 x6 : 0000000000000100 x5 : 0000000000000000 x4 : 000000007b906000 x3 : ffff80007c61a880 x2 : ffff7dfffeefffff x1 : 0000000040000000 x0 : 00e80000fe100f07 Process kworker/0:1 (pid: 39, stack limit = 0x (ptrval)) Call trace: ioremap_page_range+0x370/0x3c8 pci_remap_iospace+0x7c/0xac pci_parse_request_of_pci_ranges+0x13c/0x190 rcar_pcie_probe+0x4c/0xb04 platform_drv_probe+0x50/0xbc driver_probe_device+0x21c/0x308 __device_attach_driver+0x98/0xc8 bus_for_each_drv+0x54/0x94 __device_attach+0xc4/0x12c device_initial_probe+0x10/0x18 bus_probe_device+0x90/0x98 deferred_probe_work_func+0xb0/0x150 process_one_work+0x12c/0x29c worker_thread+0x200/0x3fc kthread+0x108/0x134 ret_from_fork+0x10/0x18 Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000) It turned out that pci_remap_iospace() wasn't undone when the driver's probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER, the probe was retried, finally causing the BUG due to trying to remap already remapped pages. The Faraday PCI driver has the same issue. Replace pci_remap_iospace() with its devm_ managed version to fix the bug. Fixes: d3c68e0a7e34 ("PCI: faraday: Add Faraday Technology FTPCI100 PCI Host Bridge driver") Signed-off-by: Sergei Shtylyov [lorenzo.pieralisi@arm.com: updated the commit log] Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Reviewed-by: Linus Walleij --- drivers/pci/controller/pci-ftpci100.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/controller/pci-ftpci100.c b/drivers/pci/controller/pci-ftpci100.c index 20bb2564a6b3..bf5ece5d9291 100644 --- a/drivers/pci/controller/pci-ftpci100.c +++ b/drivers/pci/controller/pci-ftpci100.c @@ -503,7 +503,7 @@ static int faraday_pci_probe(struct platform_device *pdev) dev_err(dev, "illegal IO mem size\n"); return -EINVAL; } - ret = pci_remap_iospace(io, io_base); + ret = devm_pci_remap_iospace(dev, io, io_base); if (ret) { dev_warn(dev, "error %d: failed to map resource %pR\n", ret, io); -- cgit v1.2.3 From 438477b9a089e45ea7c8fb549553e52833117ed8 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 18 Jul 2018 15:41:05 -0500 Subject: PCI: mediatek: Fix I/O space page leak When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY driver was left disabled, the kernel crashed with this BUG: kernel BUG at lib/ioremap.c:72! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092 Hardware name: Renesas Condor board based on r8a77980 (DT) Workqueue: events deferred_probe_work_func pstate: 80000005 (Nzcv daif -PAN -UAO) pc : ioremap_page_range+0x370/0x3c8 lr : ioremap_page_range+0x40/0x3c8 sp : ffff000008da39e0 x29: ffff000008da39e0 x28: 00e8000000000f07 x27: ffff7dfffee00000 x26: 0140000000000000 x25: ffff7dfffef00000 x24: 00000000000fe100 x23: ffff80007b906000 x22: ffff000008ab8000 x21: ffff000008bb1d58 x20: ffff7dfffef00000 x19: ffff800009c30fb8 x18: 0000000000000001 x17: 00000000000152d0 x16: 00000000014012d0 x15: 0000000000000000 x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720 x11: 0720072007300730 x10: 00000000000000ae x9 : 0000000000000000 x8 : ffff7dffff000000 x7 : 0000000000000000 x6 : 0000000000000100 x5 : 0000000000000000 x4 : 000000007b906000 x3 : ffff80007c61a880 x2 : ffff7dfffeefffff x1 : 0000000040000000 x0 : 00e80000fe100f07 Process kworker/0:1 (pid: 39, stack limit = 0x (ptrval)) Call trace: ioremap_page_range+0x370/0x3c8 pci_remap_iospace+0x7c/0xac pci_parse_request_of_pci_ranges+0x13c/0x190 rcar_pcie_probe+0x4c/0xb04 platform_drv_probe+0x50/0xbc driver_probe_device+0x21c/0x308 __device_attach_driver+0x98/0xc8 bus_for_each_drv+0x54/0x94 __device_attach+0xc4/0x12c device_initial_probe+0x10/0x18 bus_probe_device+0x90/0x98 deferred_probe_work_func+0xb0/0x150 process_one_work+0x12c/0x29c worker_thread+0x200/0x3fc kthread+0x108/0x134 ret_from_fork+0x10/0x18 Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000) It turned out that pci_remap_iospace() wasn't undone when the driver's probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER, the probe was retried, finally causing the BUG due to trying to remap already remapped pages. The MediaTek PCIe driver has the same issue. Replace devm_pci_remap_iospace() with its devm_ managed counterpart to fix the bug. Fixes: 637cfacae96f ("PCI: mediatek: Add MediaTek PCIe host controller support") Signed-off-by: Sergei Shtylyov [lorenzo.pieralisi@arm.com: updated the commit log] Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Reviewed-by: Linus Walleij --- drivers/pci/controller/pcie-mediatek.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/controller/pcie-mediatek.c b/drivers/pci/controller/pcie-mediatek.c index 0baabe30858f..861dda69f366 100644 --- a/drivers/pci/controller/pcie-mediatek.c +++ b/drivers/pci/controller/pcie-mediatek.c @@ -1109,7 +1109,7 @@ static int mtk_pcie_request_resources(struct mtk_pcie *pcie) if (err < 0) return err; - pci_remap_iospace(&pcie->pio, pcie->io.start); + devm_pci_remap_iospace(dev, &pcie->pio, pcie->io.start); return 0; } -- cgit v1.2.3 From 270ed733e68955049b693bea8f4a1efb293a96ae Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 18 Jul 2018 15:41:11 -0500 Subject: PCI: v3-semi: Fix I/O space page leak When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY driver was left disabled, the kernel crashed with this BUG: kernel BUG at lib/ioremap.c:72! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092 Hardware name: Renesas Condor board based on r8a77980 (DT) Workqueue: events deferred_probe_work_func pstate: 80000005 (Nzcv daif -PAN -UAO) pc : ioremap_page_range+0x370/0x3c8 lr : ioremap_page_range+0x40/0x3c8 sp : ffff000008da39e0 x29: ffff000008da39e0 x28: 00e8000000000f07 x27: ffff7dfffee00000 x26: 0140000000000000 x25: ffff7dfffef00000 x24: 00000000000fe100 x23: ffff80007b906000 x22: ffff000008ab8000 x21: ffff000008bb1d58 x20: ffff7dfffef00000 x19: ffff800009c30fb8 x18: 0000000000000001 x17: 00000000000152d0 x16: 00000000014012d0 x15: 0000000000000000 x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720 x11: 0720072007300730 x10: 00000000000000ae x9 : 0000000000000000 x8 : ffff7dffff000000 x7 : 0000000000000000 x6 : 0000000000000100 x5 : 0000000000000000 x4 : 000000007b906000 x3 : ffff80007c61a880 x2 : ffff7dfffeefffff x1 : 0000000040000000 x0 : 00e80000fe100f07 Process kworker/0:1 (pid: 39, stack limit = 0x (ptrval)) Call trace: ioremap_page_range+0x370/0x3c8 pci_remap_iospace+0x7c/0xac pci_parse_request_of_pci_ranges+0x13c/0x190 rcar_pcie_probe+0x4c/0xb04 platform_drv_probe+0x50/0xbc driver_probe_device+0x21c/0x308 __device_attach_driver+0x98/0xc8 bus_for_each_drv+0x54/0x94 __device_attach+0xc4/0x12c device_initial_probe+0x10/0x18 bus_probe_device+0x90/0x98 deferred_probe_work_func+0xb0/0x150 process_one_work+0x12c/0x29c worker_thread+0x200/0x3fc kthread+0x108/0x134 ret_from_fork+0x10/0x18 Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000) It turned out that pci_remap_iospace() wasn't undone when the driver's probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER, the probe was retried, finally causing the BUG due to trying to remap already remapped pages. The V3 Semiconductor PCI driver has the same issue. Replace devm_pci_remap_iospace() with its devm_ managed version to fix the bug. Fixes: 68a15eb7bd0c ("PCI: v3-semi: Add V3 Semiconductor PCI host driver") Signed-off-by: Sergei Shtylyov [lorenzo.pieralisi@arm.com: updated the commit log] Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Reviewed-by: Linus Walleij --- drivers/pci/controller/pci-v3-semi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/controller/pci-v3-semi.c b/drivers/pci/controller/pci-v3-semi.c index 68b8bfbdb867..d219404bad92 100644 --- a/drivers/pci/controller/pci-v3-semi.c +++ b/drivers/pci/controller/pci-v3-semi.c @@ -537,7 +537,7 @@ static int v3_pci_setup_resource(struct v3_pci *v3, v3->io_bus_addr = io->start - win->offset; dev_dbg(dev, "I/O window %pR, bus addr %pap\n", io, &v3->io_bus_addr); - ret = pci_remap_iospace(io, io_base); + ret = devm_pci_remap_iospace(dev, io, io_base); if (ret) { dev_warn(dev, "error %d: failed to map resource %pR\n", -- cgit v1.2.3 From 3ee593adbbb46d9e1bb1320915943926f4744483 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Tue, 17 Jul 2018 16:52:54 +0100 Subject: ipv6: sr: fix useless rol32 call on hash The rol32 call is currently rotating hash but the rol'd value is being discarded. I believe the current code is incorrect and hash should be assigned the rotated value returned from rol32. Detected by CoverityScan, CID#1468411 ("Useless call") Fixes: b5facfdba14c ("ipv6: sr: Compute flowlabel for outer IPv6 header of seg6 encap mode") Signed-off-by: Colin Ian King Acked-by: dlebrun@google.com Signed-off-by: David S. Miller --- net/ipv6/seg6_iptunnel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/seg6_iptunnel.c b/net/ipv6/seg6_iptunnel.c index 19ccf0dc996c..a8854dd3e9c5 100644 --- a/net/ipv6/seg6_iptunnel.c +++ b/net/ipv6/seg6_iptunnel.c @@ -101,7 +101,7 @@ static __be32 seg6_make_flowlabel(struct net *net, struct sk_buff *skb, if (do_flowlabel > 0) { hash = skb_get_hash(skb); - rol32(hash, 16); + hash = rol32(hash, 16); flowlabel = (__force __be32)hash & IPV6_FLOWLABEL_MASK; } else if (!do_flowlabel && skb->protocol == htons(ETH_P_IPV6)) { flowlabel = ip6_flowlabel(inner_hdr); -- cgit v1.2.3 From 169dc027fb02492ea37a0575db6a658cf922b854 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Tue, 17 Jul 2018 17:12:39 +0100 Subject: ipv6: fix useless rol32 call on hash The rol32 call is currently rotating hash but the rol'd value is being discarded. I believe the current code is incorrect and hash should be assigned the rotated value returned from rol32. Thanks to David Lebrun for spotting this. Signed-off-by: Colin Ian King Signed-off-by: David S. Miller --- include/net/ipv6.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/net/ipv6.h b/include/net/ipv6.h index 7528632bcf2a..8f73be494503 100644 --- a/include/net/ipv6.h +++ b/include/net/ipv6.h @@ -823,7 +823,7 @@ static inline __be32 ip6_make_flowlabel(struct net *net, struct sk_buff *skb, * to minimize possbility that any useful information to an * attacker is leaked. Only lower 20 bits are relevant. */ - rol32(hash, 16); + hash = rol32(hash, 16); flowlabel = (__force __be32)hash & IPV6_FLOWLABEL_MASK; -- cgit v1.2.3 From b2bab426dc715de147f8039a3fccff27d795f4eb Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Wed, 18 Jul 2018 08:31:43 +0200 Subject: net: qca_spi: Avoid packet drop during initial sync As long as the synchronization with the QCA7000 isn't finished, we cannot accept packets from the upper layers. So let the SPI thread enable the TX queue after sync and avoid unwanted packet drop. Signed-off-by: Stefan Wahren Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Signed-off-by: David S. Miller --- drivers/net/ethernet/qualcomm/qca_spi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qualcomm/qca_spi.c b/drivers/net/ethernet/qualcomm/qca_spi.c index 5803cd6db406..7db149f90fe3 100644 --- a/drivers/net/ethernet/qualcomm/qca_spi.c +++ b/drivers/net/ethernet/qualcomm/qca_spi.c @@ -658,7 +658,7 @@ qcaspi_netdev_open(struct net_device *dev) return ret; } - netif_start_queue(qca->net_dev); + /* SPI thread takes care of TX queue */ return 0; } -- cgit v1.2.3 From 711c62dfa6bdb4326ca6c587f295ea5c4f7269de Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Wed, 18 Jul 2018 08:31:44 +0200 Subject: net: qca_spi: Make sure the QCA7000 reset is triggered In case the SPI thread is not running, a simple reset of sync state won't fix the transmit timeout. We also need to wake up the kernel thread. Signed-off-by: Stefan Wahren Fixes: ed7d42e24eff ("net: qca_spi: fix transmit queue timeout handling") Signed-off-by: David S. Miller --- drivers/net/ethernet/qualcomm/qca_spi.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/qualcomm/qca_spi.c b/drivers/net/ethernet/qualcomm/qca_spi.c index 7db149f90fe3..7fa815d189ab 100644 --- a/drivers/net/ethernet/qualcomm/qca_spi.c +++ b/drivers/net/ethernet/qualcomm/qca_spi.c @@ -760,6 +760,9 @@ qcaspi_netdev_tx_timeout(struct net_device *dev) qca->net_dev->stats.tx_errors++; /* Trigger tx queue flush and QCA7000 reset */ qca->sync = QCASPI_SYNC_UNKNOWN; + + if (qca->spi_thread) + wake_up_process(qca->spi_thread); } static int -- cgit v1.2.3 From 50973993260a6934f0a00da53d9b746cfbea89ab Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Wed, 18 Jul 2018 08:31:45 +0200 Subject: net: qca_spi: Fix log level if probe fails In cases the probing fails the log level of the messages should be an error. Signed-off-by: Stefan Wahren Signed-off-by: David S. Miller --- drivers/net/ethernet/qualcomm/qca_spi.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/net/ethernet/qualcomm/qca_spi.c b/drivers/net/ethernet/qualcomm/qca_spi.c index 7fa815d189ab..206f0266463e 100644 --- a/drivers/net/ethernet/qualcomm/qca_spi.c +++ b/drivers/net/ethernet/qualcomm/qca_spi.c @@ -881,22 +881,22 @@ qca_spi_probe(struct spi_device *spi) if ((qcaspi_clkspeed < QCASPI_CLK_SPEED_MIN) || (qcaspi_clkspeed > QCASPI_CLK_SPEED_MAX)) { - dev_info(&spi->dev, "Invalid clkspeed: %d\n", - qcaspi_clkspeed); + dev_err(&spi->dev, "Invalid clkspeed: %d\n", + qcaspi_clkspeed); return -EINVAL; } if ((qcaspi_burst_len < QCASPI_BURST_LEN_MIN) || (qcaspi_burst_len > QCASPI_BURST_LEN_MAX)) { - dev_info(&spi->dev, "Invalid burst len: %d\n", - qcaspi_burst_len); + dev_err(&spi->dev, "Invalid burst len: %d\n", + qcaspi_burst_len); return -EINVAL; } if ((qcaspi_pluggable < QCASPI_PLUGGABLE_MIN) || (qcaspi_pluggable > QCASPI_PLUGGABLE_MAX)) { - dev_info(&spi->dev, "Invalid pluggable: %d\n", - qcaspi_pluggable); + dev_err(&spi->dev, "Invalid pluggable: %d\n", + qcaspi_pluggable); return -EINVAL; } @@ -958,8 +958,8 @@ qca_spi_probe(struct spi_device *spi) } if (register_netdev(qcaspi_devs)) { - dev_info(&spi->dev, "Unable to register net device %s\n", - qcaspi_devs->name); + dev_err(&spi->dev, "Unable to register net device %s\n", + qcaspi_devs->name); free_netdev(qcaspi_devs); return -EFAULT; } -- cgit v1.2.3 From e40562abdf81f32356218d4196c33f5f93c040f7 Mon Sep 17 00:00:00 2001 From: Alexander Sverdlin Date: Tue, 17 Jul 2018 18:23:58 +0200 Subject: net: cavium: Add fine-granular dependencies on PCI Add dependencies on PCI where necessary. Fixes: 7e2bc7fb65 ("net: cavium: Drop dependency of NET_VENDOR_CAVIUM on PCI") Signed-off-by: Alexander Sverdlin Signed-off-by: David S. Miller --- drivers/net/ethernet/cavium/Kconfig | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/cavium/Kconfig b/drivers/net/ethernet/cavium/Kconfig index 043e3c11c42b..92d88c5f76fb 100644 --- a/drivers/net/ethernet/cavium/Kconfig +++ b/drivers/net/ethernet/cavium/Kconfig @@ -15,7 +15,7 @@ if NET_VENDOR_CAVIUM config THUNDER_NIC_PF tristate "Thunder Physical function driver" - depends on 64BIT + depends on 64BIT && PCI select THUNDER_NIC_BGX ---help--- This driver supports Thunder's NIC physical function. @@ -28,13 +28,13 @@ config THUNDER_NIC_PF config THUNDER_NIC_VF tristate "Thunder Virtual function driver" imply CAVIUM_PTP - depends on 64BIT + depends on 64BIT && PCI ---help--- This driver supports Thunder's NIC virtual function config THUNDER_NIC_BGX tristate "Thunder MAC interface driver (BGX)" - depends on 64BIT + depends on 64BIT && PCI select PHYLIB select MDIO_THUNDER select THUNDER_NIC_RGX @@ -44,7 +44,7 @@ config THUNDER_NIC_BGX config THUNDER_NIC_RGX tristate "Thunder MAC interface driver (RGX)" - depends on 64BIT + depends on 64BIT && PCI select PHYLIB select MDIO_THUNDER ---help--- @@ -53,7 +53,7 @@ config THUNDER_NIC_RGX config CAVIUM_PTP tristate "Cavium PTP coprocessor as PTP clock" - depends on 64BIT + depends on 64BIT && PCI imply PTP_1588_CLOCK default y ---help--- @@ -65,7 +65,7 @@ config CAVIUM_PTP config LIQUIDIO tristate "Cavium LiquidIO support" - depends on 64BIT + depends on 64BIT && PCI depends on MAY_USE_DEVLINK imply PTP_1588_CLOCK select FW_LOADER -- cgit v1.2.3 From a2ec9d14edcd8e92c1d6cd2132d6c9a1dc5d0985 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Tue, 17 Jul 2018 18:41:54 +0200 Subject: MAINTAINERS: Drop inactive Vitaly Bordug's email The Vitaly Bordug's email bounces ("ru.mvista.com: Name or service not known") and there was no activity (ack, review, sign) since 2009. Cc: Vitaly Bordug Cc: Pantelis Antoniou Cc: "David S. Miller" Signed-off-by: Krzysztof Kozlowski Signed-off-by: David S. Miller --- MAINTAINERS | 1 - 1 file changed, 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 0bf83d50aaba..74e3b028dd0c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5789,7 +5789,6 @@ F: include/linux/fsl/ FREESCALE SOC FS_ENET DRIVER M: Pantelis Antoniou -M: Vitaly Bordug L: linuxppc-dev@lists.ozlabs.org L: netdev@vger.kernel.org S: Maintained -- cgit v1.2.3 From 6b81b193b83e87da1ea13217d684b54fccf8ee8a Mon Sep 17 00:00:00 2001 From: Haiyang Zhang Date: Tue, 17 Jul 2018 17:11:13 +0000 Subject: hv_netvsc: Fix napi reschedule while receive completion is busy If out ring is full temporarily and receive completion cannot go out, we may still need to reschedule napi if certain conditions are met. Otherwise the napi poll might be stopped forever, and cause network disconnect. Fixes: 7426b1a51803 ("netvsc: optimize receive completions") Signed-off-by: Stephen Hemminger Signed-off-by: Haiyang Zhang Signed-off-by: David S. Miller --- drivers/net/hyperv/netvsc.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/drivers/net/hyperv/netvsc.c b/drivers/net/hyperv/netvsc.c index 8e9d0ee1572b..31c3d77b4733 100644 --- a/drivers/net/hyperv/netvsc.c +++ b/drivers/net/hyperv/netvsc.c @@ -1274,6 +1274,7 @@ int netvsc_poll(struct napi_struct *napi, int budget) struct hv_device *device = netvsc_channel_to_device(channel); struct net_device *ndev = hv_get_drvdata(device); int work_done = 0; + int ret; /* If starting a new interval */ if (!nvchan->desc) @@ -1285,16 +1286,18 @@ int netvsc_poll(struct napi_struct *napi, int budget) nvchan->desc = hv_pkt_iter_next(channel, nvchan->desc); } - /* If send of pending receive completions suceeded - * and did not exhaust NAPI budget this time - * and not doing busy poll + /* Send any pending receive completions */ + ret = send_recv_completions(ndev, net_device, nvchan); + + /* If it did not exhaust NAPI budget this time + * and not doing busy poll * then re-enable host interrupts - * and reschedule if ring is not empty. + * and reschedule if ring is not empty + * or sending receive completion failed. */ - if (send_recv_completions(ndev, net_device, nvchan) == 0 && - work_done < budget && + if (work_done < budget && napi_complete_done(napi, work_done) && - hv_end_read(&channel->inbound) && + (ret || hv_end_read(&channel->inbound)) && napi_schedule_prep(napi)) { hv_begin_read(&channel->inbound); __napi_schedule(napi); -- cgit v1.2.3 From 9ba8376ce1e2cbf4ce44f7e4bee1d0648e10d594 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Tue, 17 Jul 2018 20:17:33 -0500 Subject: ptp: fix missing break in switch It seems that a *break* is missing in order to avoid falling through to the default case. Otherwise, checking *chan* makes no sense. Fixes: 72df7a7244c0 ("ptp: Allow reassigning calibration pin function") Signed-off-by: Gustavo A. R. Silva Acked-by: Richard Cochran Signed-off-by: David S. Miller --- drivers/ptp/ptp_chardev.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ptp/ptp_chardev.c b/drivers/ptp/ptp_chardev.c index 547dbdac9d54..01b0e2bb3319 100644 --- a/drivers/ptp/ptp_chardev.c +++ b/drivers/ptp/ptp_chardev.c @@ -89,6 +89,7 @@ int ptp_set_pinfunc(struct ptp_clock *ptp, unsigned int pin, case PTP_PF_PHYSYNC: if (chan != 0) return -EINVAL; + break; default: return -EINVAL; } -- cgit v1.2.3 From e56b8ce363a36fb7b74b80aaa5cc9084f2c908b4 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 17 Jul 2018 18:27:45 -0700 Subject: tcp: identify cryptic messages as TCP seq # bugs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Attempt to make cryptic TCP seq number error messages clearer by (1) identifying the source of the message as "TCP", (2) identifying the errors as "seq # bug", and (3) grouping the field identifiers and values by separating them with commas. E.g., the following message is changed from: recvmsg bug 2: copied 73BCB6CD seq 70F17CBE rcvnxt 73BCB9AA fl 0 WARNING: CPU: 2 PID: 1501 at /linux/net/ipv4/tcp.c:1881 tcp_recvmsg+0x649/0xb90 to: TCP recvmsg seq # bug 2: copied 73BCB6CD, seq 70F17CBE, rcvnxt 73BCB9AA, fl 0 WARNING: CPU: 2 PID: 1501 at /linux/net/ipv4/tcp.c:2011 tcp_recvmsg+0x694/0xba0 Suggested-by: 積丹尼 Dan Jacobson Signed-off-by: Randy Dunlap Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/tcp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index ec2186e3087f..4491faf83f4f 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -1998,7 +1998,7 @@ int tcp_recvmsg(struct sock *sk, struct msghdr *msg, size_t len, int nonblock, * shouldn't happen. */ if (WARN(before(*seq, TCP_SKB_CB(skb)->seq), - "recvmsg bug: copied %X seq %X rcvnxt %X fl %X\n", + "TCP recvmsg seq # bug: copied %X, seq %X, rcvnxt %X, fl %X\n", *seq, TCP_SKB_CB(skb)->seq, tp->rcv_nxt, flags)) break; @@ -2013,7 +2013,7 @@ int tcp_recvmsg(struct sock *sk, struct msghdr *msg, size_t len, int nonblock, if (TCP_SKB_CB(skb)->tcp_flags & TCPHDR_FIN) goto found_fin_ok; WARN(!(flags & MSG_PEEK), - "recvmsg bug 2: copied %X seq %X rcvnxt %X fl %X\n", + "TCP recvmsg seq # bug 2: copied %X, seq %X, rcvnxt %X, fl %X\n", *seq, TCP_SKB_CB(skb)->seq, tp->rcv_nxt, flags); } -- cgit v1.2.3 From e279d634f3d57452eb106a0c0e99a6add3fba1a6 Mon Sep 17 00:00:00 2001 From: Shay Agroskin Date: Wed, 27 Jun 2018 15:43:07 +0300 Subject: net/mlx5e: Refine ets validation function Removed an error message received when configuring ETS total bandwidth to be zero. Our hardware doesn't support such configuration, so we shall reject it in the driver. Nevertheless, we removed the error message in order to eliminate error messages caused by old userspace tools who try to pass such configuration. Fixes: ff0891915cd7 ("net/mlx5e: Fix ETS BW check") Signed-off-by: Shay Agroskin Reviewed-by: Huy Nguyen Reviewed-by: Eran Ben Elisha Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c index 0a52f31fef37..86bc9ac99586 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c @@ -275,7 +275,8 @@ int mlx5e_dcbnl_ieee_setets_core(struct mlx5e_priv *priv, struct ieee_ets *ets) } static int mlx5e_dbcnl_validate_ets(struct net_device *netdev, - struct ieee_ets *ets) + struct ieee_ets *ets, + bool zero_sum_allowed) { bool have_ets_tc = false; int bw_sum = 0; @@ -300,8 +301,9 @@ static int mlx5e_dbcnl_validate_ets(struct net_device *netdev, } if (have_ets_tc && bw_sum != 100) { - netdev_err(netdev, - "Failed to validate ETS: BW sum is illegal\n"); + if (bw_sum || (!bw_sum && !zero_sum_allowed)) + netdev_err(netdev, + "Failed to validate ETS: BW sum is illegal\n"); return -EINVAL; } return 0; @@ -316,7 +318,7 @@ static int mlx5e_dcbnl_ieee_setets(struct net_device *netdev, if (!MLX5_CAP_GEN(priv->mdev, ets)) return -EOPNOTSUPP; - err = mlx5e_dbcnl_validate_ets(netdev, ets); + err = mlx5e_dbcnl_validate_ets(netdev, ets, false); if (err) return err; @@ -642,12 +644,9 @@ static u8 mlx5e_dcbnl_setall(struct net_device *netdev) ets.prio_tc[i]); } - err = mlx5e_dbcnl_validate_ets(netdev, &ets); - if (err) { - netdev_err(netdev, - "%s, Failed to validate ETS: %d\n", __func__, err); + err = mlx5e_dbcnl_validate_ets(netdev, &ets, true); + if (err) goto out; - } err = mlx5e_dcbnl_ieee_setets_core(priv, &ets); if (err) { -- cgit v1.2.3 From 33180bee86a8940a84950edca46315cd9dd6deb5 Mon Sep 17 00:00:00 2001 From: Ariel Levkovich Date: Mon, 25 Jun 2018 19:12:02 +0300 Subject: net/mlx5: Adjust clock overflow work period When driver converts HW timestamp to wall clock time it subtracts the last saved cycle counter from the HW timestamp and converts the difference to nanoseconds. The conversion is done by multiplying the cycles difference with the clock multiplier value as a first step and therefore the cycles difference should be small enough so that the multiplication product doesn't exceed 64bit. The overflow handling routine is in charge of updating the last saved cycle counter in driver and it is called periodically using kernel delayed workqueue. The delay period for this work is calculated using the max HW cycle counter value (a 41 bit mask) as a base which doesn't take the 64bit limit into account so the delay period may be incorrect and too long to prevent a large difference between the HW counter and the last saved counter in SW. This change adjusts the work period for the HW clock overflow work by taking the minimum between the previous value and the quotient of max u64 value and the clock multiplier value. Fixes: ef9814deafd0 ("net/mlx5e: Add HW timestamping (TS) support") Signed-off-by: Ariel Levkovich Reviewed-by: Eran Ben Elisha Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c b/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c index 1e062e6b2587..3f767cde4c1d 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/clock.c @@ -488,6 +488,7 @@ void mlx5_pps_event(struct mlx5_core_dev *mdev, void mlx5_init_clock(struct mlx5_core_dev *mdev) { struct mlx5_clock *clock = &mdev->clock; + u64 overflow_cycles; u64 ns; u64 frac = 0; u32 dev_freq; @@ -511,10 +512,17 @@ void mlx5_init_clock(struct mlx5_core_dev *mdev) /* Calculate period in seconds to call the overflow watchdog - to make * sure counter is checked at least once every wrap around. + * The period is calculated as the minimum between max HW cycles count + * (The clock source mask) and max amount of cycles that can be + * multiplied by clock multiplier where the result doesn't exceed + * 64bits. */ - ns = cyclecounter_cyc2ns(&clock->cycles, clock->cycles.mask, + overflow_cycles = div64_u64(~0ULL >> 1, clock->cycles.mult); + overflow_cycles = min(overflow_cycles, clock->cycles.mask >> 1); + + ns = cyclecounter_cyc2ns(&clock->cycles, overflow_cycles, frac, &frac); - do_div(ns, NSEC_PER_SEC / 2 / HZ); + do_div(ns, NSEC_PER_SEC / HZ); clock->overflow_period = ns; mdev->clock_info_page = alloc_page(GFP_KERNEL); -- cgit v1.2.3 From 2630bae8018823c3b88788b69fb9f16ea3b4a11e Mon Sep 17 00:00:00 2001 From: Eran Ben Elisha Date: Sun, 8 Jul 2018 13:08:55 +0300 Subject: net/mlx5e: Fix quota counting in aRFS expire flow Quota should follow the amount of rules which do expire, and not the number of rules that were examined, fixed that. Fixes: 18c908e477dc ("net/mlx5e: Add accelerated RFS support") Signed-off-by: Eran Ben Elisha Reviewed-by: Maor Gottlieb Reviewed-by: Tariq Toukan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_arfs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_arfs.c b/drivers/net/ethernet/mellanox/mlx5/core/en_arfs.c index 75e4308ba786..7b54a4999cf3 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_arfs.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_arfs.c @@ -381,14 +381,14 @@ static void arfs_may_expire_flow(struct mlx5e_priv *priv) HLIST_HEAD(del_list); spin_lock_bh(&priv->fs.arfs.arfs_lock); mlx5e_for_each_arfs_rule(arfs_rule, htmp, priv->fs.arfs.arfs_tables, i, j) { - if (quota++ > MLX5E_ARFS_EXPIRY_QUOTA) - break; if (!work_pending(&arfs_rule->arfs_work) && rps_may_expire_flow(priv->netdev, arfs_rule->rxq, arfs_rule->flow_id, arfs_rule->filter_id)) { hlist_del_init(&arfs_rule->hlist); hlist_add_head(&arfs_rule->hlist, &del_list); + if (quota++ > MLX5E_ARFS_EXPIRY_QUOTA) + break; } } spin_unlock_bh(&priv->fs.arfs.arfs_lock); -- cgit v1.2.3 From d2e1c57bcf9a07cbb67f30ecf238f298799bce1c Mon Sep 17 00:00:00 2001 From: Eran Ben Elisha Date: Sun, 8 Jul 2018 14:52:12 +0300 Subject: net/mlx5e: Don't allow aRFS for encapsulated packets Driver is yet to support aRFS for encapsulated packets, return early error in such case. Fixes: 18c908e477dc ("net/mlx5e: Add accelerated RFS support") Signed-off-by: Eran Ben Elisha Reviewed-by: Tariq Toukan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_arfs.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_arfs.c b/drivers/net/ethernet/mellanox/mlx5/core/en_arfs.c index 7b54a4999cf3..d258bb679271 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_arfs.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_arfs.c @@ -711,6 +711,9 @@ int mlx5e_rx_flow_steer(struct net_device *dev, const struct sk_buff *skb, skb->protocol != htons(ETH_P_IPV6)) return -EPROTONOSUPPORT; + if (skb->encapsulation) + return -EPROTONOSUPPORT; + arfs_t = arfs_get_table(arfs, arfs_get_ip_proto(skb), skb->protocol); if (!arfs_t) return -EPROTONOSUPPORT; -- cgit v1.2.3 From 443a858158d35916e572b75667ca4924a6af2182 Mon Sep 17 00:00:00 2001 From: Saeed Mahameed Date: Mon, 9 Jul 2018 16:41:40 -0700 Subject: net/mlx5: E-Switch, UBSAN fix undefined behavior in mlx5_eswitch_mode With debug kernel UBSAN detects the following issue, which might happen when eswitch instance is not created, fix this by testing the eswitch pointer before returning the eswitch mode, if not set return mode = SRIOV_NONE. [ 32.528951] UBSAN: Undefined behaviour in drivers/net/ethernet/mellanox/mlx5/core/eswitch.c:2219:12 [ 32.528951] member access within null pointer of type 'struct mlx5_eswitch' [ 32.528951] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.18.0-rc3-dirty #181 [ 32.528951] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 [ 32.528951] Call Trace: [ 32.528951] dump_stack+0xc7/0x13b [ 32.528951] ? show_regs_print_info+0x5/0x5 [ 32.528951] ? __pm_runtime_use_autosuspend+0x140/0x140 [ 32.528951] ubsan_epilogue+0x9/0x49 [ 32.528951] ubsan_type_mismatch_common+0x1f9/0x2c0 [ 32.528951] ? ucs2_as_utf8+0x310/0x310 [ 32.528951] ? device_initialize+0x229/0x2e0 [ 32.528951] __ubsan_handle_type_mismatch+0x9f/0xc9 [ 32.528951] ? __ubsan_handle_divrem_overflow+0x19b/0x19b [ 32.578008] ? ib_device_get_by_index+0xf0/0xf0 [ 32.578008] mlx5_eswitch_mode+0x30/0x40 [ 32.578008] mlx5_ib_add+0x1e0/0x4a0 Fixes: 57cbd893c4c5 ("net/mlx5: E-Switch, Move representors definition to a global scope") Signed-off-by: Saeed Mahameed Reviewed-by: Leon Romanovsky --- drivers/net/ethernet/mellanox/mlx5/core/eswitch.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c index b79d74860a30..dd01ad4c0b54 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c @@ -2216,6 +2216,6 @@ free_out: u8 mlx5_eswitch_mode(struct mlx5_eswitch *esw) { - return esw->mode; + return ESW_ALLOWED(esw) ? esw->mode : SRIOV_NONE; } EXPORT_SYMBOL_GPL(mlx5_eswitch_mode); -- cgit v1.2.3 From 8c49f54a3f48ddb516e7e12e5c065317c06a58fa Mon Sep 17 00:00:00 2001 From: Raed Salem Date: Tue, 3 Jul 2018 10:10:38 +0300 Subject: net/mlx5: Fix 'DON'T_TRAP' functionality The flow counters binding support commit introduced a code change where none NULL 'rule_dest' is always passed to mlx5_add_flow_rules, this breaks 'DON'T_TRAP' rules insertion. The fix uses the equivalent 'dest_num' value instead of dest pointer at the failed check. fixes: 3b3233fbf02e ('IB/mlx5: Add flow counters binding support') Signed-off-by: Raed Salem Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/fs_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c index f1a86cea86a0..6ddb2565884d 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c @@ -1887,7 +1887,7 @@ mlx5_add_flow_rules(struct mlx5_flow_table *ft, if (flow_act->action == MLX5_FLOW_CONTEXT_ACTION_FWD_NEXT_PRIO) { if (!fwd_next_prio_supported(ft)) return ERR_PTR(-EOPNOTSUPP); - if (dest) + if (dest_num) return ERR_PTR(-EINVAL); mutex_lock(&root->chain_lock); next_ft = find_next_chained_ft(prio); -- cgit v1.2.3 From d7037ad73daa9598b8caa7d5fdf41e8ceee6ef73 Mon Sep 17 00:00:00 2001 From: Tariq Toukan Date: Sun, 8 Jul 2018 12:14:59 +0300 Subject: net/mlx5: Fix QP fragmented buffer allocation Fix bad alignment of SQ buffer in fragmented QP allocation. It should start directly after RQ buffer ends. Take special care of the end case where the RQ buffer does not occupy a whole page. RQ size is a power of two, so would be the case only for small RQ sizes (RQ size < PAGE_SIZE). Fix wrong assignments for sqb->size (mistakenly assigned RQ size), and for npages value of RQ and SQ. Fixes: 3a2f70331226 ("net/mlx5: Use order-0 allocations for all WQ types") Signed-off-by: Tariq Toukan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/alloc.c | 2 +- drivers/net/ethernet/mellanox/mlx5/core/wq.c | 34 ++++++++++++++++--------- include/linux/mlx5/driver.h | 18 ++++++++++--- 3 files changed, 38 insertions(+), 16 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/alloc.c b/drivers/net/ethernet/mellanox/mlx5/core/alloc.c index 323ffe8bf7e4..456f30007ad6 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/alloc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/alloc.c @@ -123,7 +123,7 @@ int mlx5_frag_buf_alloc_node(struct mlx5_core_dev *dev, int size, int i; buf->size = size; - buf->npages = 1 << get_order(size); + buf->npages = DIV_ROUND_UP(size, PAGE_SIZE); buf->page_shift = PAGE_SHIFT; buf->frags = kcalloc(buf->npages, sizeof(struct mlx5_buf_list), GFP_KERNEL); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/wq.c b/drivers/net/ethernet/mellanox/mlx5/core/wq.c index b97bb72b4db4..86478a6b99c5 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/wq.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/wq.c @@ -113,35 +113,45 @@ err_db_free: return err; } -static void mlx5e_qp_set_frag_buf(struct mlx5_frag_buf *buf, - struct mlx5_wq_qp *qp) +static void mlx5_qp_set_frag_buf(struct mlx5_frag_buf *buf, + struct mlx5_wq_qp *qp) { + struct mlx5_frag_buf_ctrl *sq_fbc; struct mlx5_frag_buf *rqb, *sqb; - rqb = &qp->rq.fbc.frag_buf; + rqb = &qp->rq.fbc.frag_buf; *rqb = *buf; rqb->size = mlx5_wq_cyc_get_byte_size(&qp->rq); - rqb->npages = 1 << get_order(rqb->size); + rqb->npages = DIV_ROUND_UP(rqb->size, PAGE_SIZE); - sqb = &qp->sq.fbc.frag_buf; - *sqb = *buf; - sqb->size = mlx5_wq_cyc_get_byte_size(&qp->rq); - sqb->npages = 1 << get_order(sqb->size); + sq_fbc = &qp->sq.fbc; + sqb = &sq_fbc->frag_buf; + *sqb = *buf; + sqb->size = mlx5_wq_cyc_get_byte_size(&qp->sq); + sqb->npages = DIV_ROUND_UP(sqb->size, PAGE_SIZE); sqb->frags += rqb->npages; /* first part is for the rq */ + if (sq_fbc->strides_offset) + sqb->frags--; } int mlx5_wq_qp_create(struct mlx5_core_dev *mdev, struct mlx5_wq_param *param, void *qpc, struct mlx5_wq_qp *wq, struct mlx5_wq_ctrl *wq_ctrl) { + u32 sq_strides_offset; int err; mlx5_fill_fbc(MLX5_GET(qpc, qpc, log_rq_stride) + 4, MLX5_GET(qpc, qpc, log_rq_size), &wq->rq.fbc); - mlx5_fill_fbc(ilog2(MLX5_SEND_WQE_BB), - MLX5_GET(qpc, qpc, log_sq_size), - &wq->sq.fbc); + + sq_strides_offset = + ((wq->rq.fbc.frag_sz_m1 + 1) % PAGE_SIZE) / MLX5_SEND_WQE_BB; + + mlx5_fill_fbc_offset(ilog2(MLX5_SEND_WQE_BB), + MLX5_GET(qpc, qpc, log_sq_size), + sq_strides_offset, + &wq->sq.fbc); err = mlx5_db_alloc_node(mdev, &wq_ctrl->db, param->db_numa_node); if (err) { @@ -156,7 +166,7 @@ int mlx5_wq_qp_create(struct mlx5_core_dev *mdev, struct mlx5_wq_param *param, goto err_db_free; } - mlx5e_qp_set_frag_buf(&wq_ctrl->buf, wq); + mlx5_qp_set_frag_buf(&wq_ctrl->buf, wq); wq->rq.db = &wq_ctrl->db.db[MLX5_RCV_DBR]; wq->sq.db = &wq_ctrl->db.db[MLX5_SND_DBR]; diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h index 80cbb7fdce4a..83957920653a 100644 --- a/include/linux/mlx5/driver.h +++ b/include/linux/mlx5/driver.h @@ -358,6 +358,7 @@ struct mlx5_frag_buf_ctrl { struct mlx5_frag_buf frag_buf; u32 sz_m1; u32 frag_sz_m1; + u32 strides_offset; u8 log_sz; u8 log_stride; u8 log_frag_strides; @@ -983,14 +984,22 @@ static inline u32 mlx5_base_mkey(const u32 key) return key & 0xffffff00u; } -static inline void mlx5_fill_fbc(u8 log_stride, u8 log_sz, - struct mlx5_frag_buf_ctrl *fbc) +static inline void mlx5_fill_fbc_offset(u8 log_stride, u8 log_sz, + u32 strides_offset, + struct mlx5_frag_buf_ctrl *fbc) { fbc->log_stride = log_stride; fbc->log_sz = log_sz; fbc->sz_m1 = (1 << fbc->log_sz) - 1; fbc->log_frag_strides = PAGE_SHIFT - fbc->log_stride; fbc->frag_sz_m1 = (1 << fbc->log_frag_strides) - 1; + fbc->strides_offset = strides_offset; +} + +static inline void mlx5_fill_fbc(u8 log_stride, u8 log_sz, + struct mlx5_frag_buf_ctrl *fbc) +{ + mlx5_fill_fbc_offset(log_stride, log_sz, 0, fbc); } static inline void mlx5_core_init_cq_frag_buf(struct mlx5_frag_buf_ctrl *fbc, @@ -1004,7 +1013,10 @@ static inline void mlx5_core_init_cq_frag_buf(struct mlx5_frag_buf_ctrl *fbc, static inline void *mlx5_frag_buf_get_wqe(struct mlx5_frag_buf_ctrl *fbc, u32 ix) { - unsigned int frag = (ix >> fbc->log_frag_strides); + unsigned int frag; + + ix += fbc->strides_offset; + frag = ix >> fbc->log_frag_strides; return fbc->frag_buf.frags[frag].buf + ((fbc->frag_sz_m1 & ix) << fbc->log_stride); -- cgit v1.2.3 From 7e29392eee7a1e3318eeb1099807264a49f60e33 Mon Sep 17 00:00:00 2001 From: Roi Dayan Date: Thu, 12 Jul 2018 18:25:59 +0300 Subject: net/mlx5e: Only allow offloading decap egress (egdev) flows We get egress rules through the egdev mechanism when the ingress device is not supporting offload, with the expected use-case of tunnel decap ingress rule set on shared tunnel device. Make sure to offload egress/egdev rules only if decap action (tunnel key unset) exists there and err otherwise. Fixes: 717503b9cf57 ("net: sched: convert cls_flower->egress_dev users to tc_setup_cb_egdev infra") Signed-off-by: Roi Dayan Signed-off-by: Paul Blakey Reviewed-by: Or Gerlitz Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c index 0edf4751a8ba..3a2c4e548226 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c @@ -1957,6 +1957,10 @@ static bool actions_match_supported(struct mlx5e_priv *priv, else actions = flow->nic_attr->action; + if (flow->flags & MLX5E_TC_FLOW_EGRESS && + !(actions & MLX5_FLOW_CONTEXT_ACTION_DECAP)) + return false; + if (actions & MLX5_FLOW_CONTEXT_ACTION_MOD_HDR) return modify_header_match_supported(&parse_attr->spec, exts); -- cgit v1.2.3 From de2d9b5284bcb5c159c5882ac69f6bfd4dec7c67 Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Tue, 17 Jul 2018 11:28:46 +0800 Subject: soc: imx: gpc: restrict register range for regmap access GPC registers are NOT continuous, some registers are reserved and accessing them from userspace will trigger external abort, add regmap register access table to avoid below abort: root@imx6slevk:~# cat /sys/kernel/debug/regmap/20dc000.gpc/registers [ 108.480477] Unhandled fault: imprecise external abort (0x1406) at 0xb6db5004 [ 108.487985] pgd = 42b54bfd [ 108.490741] [b6db5004] *pgd=ba1b7831 [ 108.494386] Internal error: : 1406 [#1] SMP ARM [ 108.498943] Modules linked in: [ 108.502043] CPU: 0 PID: 389 Comm: cat Not tainted 4.18.0-rc1-00074-gc9f1f60-dirty #482 [ 108.509982] Hardware name: Freescale i.MX6 SoloLite (Device Tree) [ 108.516123] PC is at regmap_mmio_read32le+0x20/0x24 [ 108.521031] LR is at regmap_mmio_read+0x40/0x60 [ 108.525586] pc : [] lr : [] psr: 20060093 [ 108.531875] sp : eccf1d98 ip : eccf1da8 fp : eccf1da4 [ 108.537122] r10: ec2d3800 r9 : eccf1f60 r8 : ecfc0000 [ 108.542370] r7 : eccf1e2c r6 : eccf1e2c r5 : 00000028 r4 : ec338e00 [ 108.548920] r3 : 00000000 r2 : eccf1e2c r1 : f0980028 r0 : 00000000 [ 108.555474] Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none [ 108.562720] Control: 10c5387d Table: acf4004a DAC: 00000051 [ 108.568491] Process cat (pid: 389, stack limit = 0xd4318a65) [ 108.574174] Stack: (0xeccf1d98 to 0xeccf2000) Fixes: 721cabf6c660 ("soc: imx: move PGC handling to a new GPC driver") Signed-off-by: Anson Huang Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- drivers/soc/imx/gpc.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/drivers/soc/imx/gpc.c b/drivers/soc/imx/gpc.c index 32f0748fd067..0097a939487f 100644 --- a/drivers/soc/imx/gpc.c +++ b/drivers/soc/imx/gpc.c @@ -27,9 +27,16 @@ #define GPC_PGC_SW2ISO_SHIFT 0x8 #define GPC_PGC_SW_SHIFT 0x0 +#define GPC_PGC_PCI_PDN 0x200 +#define GPC_PGC_PCI_SR 0x20c + #define GPC_PGC_GPU_PDN 0x260 #define GPC_PGC_GPU_PUPSCR 0x264 #define GPC_PGC_GPU_PDNSCR 0x268 +#define GPC_PGC_GPU_SR 0x26c + +#define GPC_PGC_DISP_PDN 0x240 +#define GPC_PGC_DISP_SR 0x24c #define GPU_VPU_PUP_REQ BIT(1) #define GPU_VPU_PDN_REQ BIT(0) @@ -318,10 +325,24 @@ static const struct of_device_id imx_gpc_dt_ids[] = { { } }; +static const struct regmap_range yes_ranges[] = { + regmap_reg_range(GPC_CNTR, GPC_CNTR), + regmap_reg_range(GPC_PGC_PCI_PDN, GPC_PGC_PCI_SR), + regmap_reg_range(GPC_PGC_GPU_PDN, GPC_PGC_GPU_SR), + regmap_reg_range(GPC_PGC_DISP_PDN, GPC_PGC_DISP_SR), +}; + +static const struct regmap_access_table access_table = { + .yes_ranges = yes_ranges, + .n_yes_ranges = ARRAY_SIZE(yes_ranges), +}; + static const struct regmap_config imx_gpc_regmap_config = { .reg_bits = 32, .val_bits = 32, .reg_stride = 4, + .rd_table = &access_table, + .wr_table = &access_table, .max_register = 0x2ac, }; -- cgit v1.2.3 From 2f958e8240be28acee26085ba1686b4321ba4306 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Wed, 18 Jul 2018 16:10:58 +1000 Subject: drm/nouveau/fb/gp100-: disable address remapper This was causing problems on a system with a large amount of RAM, where display push buffers were being fetched incorrectly when placed in high system memory addresses. While this commit will resolve the issue on that particular system, the issue will be avoided completely with another patch to more fully solve problems with display and large amounts of system memory on Pascal. It's still probably a good idea to disable this to prevent weird issues in the future. Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nvkm/subdev/fb/base.c | 3 +++ drivers/gpu/drm/nouveau/nvkm/subdev/fb/gp100.c | 9 +++++++++ drivers/gpu/drm/nouveau/nvkm/subdev/fb/gp102.c | 1 + drivers/gpu/drm/nouveau/nvkm/subdev/fb/priv.h | 2 ++ 4 files changed, 15 insertions(+) diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/fb/base.c b/drivers/gpu/drm/nouveau/nvkm/subdev/fb/base.c index 73b5d46104bd..434d2fc5bb1c 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/fb/base.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/fb/base.c @@ -140,6 +140,9 @@ nvkm_fb_init(struct nvkm_subdev *subdev) if (fb->func->init) fb->func->init(fb); + if (fb->func->init_remapper) + fb->func->init_remapper(fb); + if (fb->func->init_page) { ret = fb->func->init_page(fb); if (WARN_ON(ret)) diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/fb/gp100.c b/drivers/gpu/drm/nouveau/nvkm/subdev/fb/gp100.c index dffe1f5e1071..8205ce436b3e 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/fb/gp100.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/fb/gp100.c @@ -36,6 +36,14 @@ gp100_fb_init_unkn(struct nvkm_fb *base) nvkm_wr32(device, 0x1faccc, nvkm_rd32(device, 0x100ccc)); } +void +gp100_fb_init_remapper(struct nvkm_fb *fb) +{ + struct nvkm_device *device = fb->subdev.device; + /* Disable address remapper. */ + nvkm_mask(device, 0x100c14, 0x00040000, 0x00000000); +} + void gp100_fb_init(struct nvkm_fb *base) { @@ -56,6 +64,7 @@ gp100_fb = { .dtor = gf100_fb_dtor, .oneinit = gf100_fb_oneinit, .init = gp100_fb_init, + .init_remapper = gp100_fb_init_remapper, .init_page = gm200_fb_init_page, .init_unkn = gp100_fb_init_unkn, .ram_new = gp100_ram_new, diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/fb/gp102.c b/drivers/gpu/drm/nouveau/nvkm/subdev/fb/gp102.c index b84b9861ef26..b4d74e815674 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/fb/gp102.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/fb/gp102.c @@ -31,6 +31,7 @@ gp102_fb = { .dtor = gf100_fb_dtor, .oneinit = gf100_fb_oneinit, .init = gp100_fb_init, + .init_remapper = gp100_fb_init_remapper, .init_page = gm200_fb_init_page, .ram_new = gp100_ram_new, }; diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/fb/priv.h b/drivers/gpu/drm/nouveau/nvkm/subdev/fb/priv.h index 2857f31466bf..1e4ad61c19e1 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/fb/priv.h +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/fb/priv.h @@ -11,6 +11,7 @@ struct nvkm_fb_func { u32 (*tags)(struct nvkm_fb *); int (*oneinit)(struct nvkm_fb *); void (*init)(struct nvkm_fb *); + void (*init_remapper)(struct nvkm_fb *); int (*init_page)(struct nvkm_fb *); void (*init_unkn)(struct nvkm_fb *); void (*intr)(struct nvkm_fb *); @@ -69,5 +70,6 @@ int gf100_fb_init_page(struct nvkm_fb *); int gm200_fb_init_page(struct nvkm_fb *); +void gp100_fb_init_remapper(struct nvkm_fb *); void gp100_fb_init_unkn(struct nvkm_fb *); #endif -- cgit v1.2.3 From bd3599a0e142cd73edd3b6801068ac3f48ac771a Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Thu, 12 Jul 2018 01:36:43 +0100 Subject: Btrfs: fix file data corruption after cloning a range and fsync When we clone a range into a file we can end up dropping existing extent maps (or trimming them) and replacing them with new ones if the range to be cloned overlaps with a range in the destination inode. When that happens we add the new extent maps to the list of modified extents in the inode's extent map tree, so that a "fast" fsync (the flag BTRFS_INODE_NEEDS_FULL_SYNC not set in the inode) will see the extent maps and log corresponding extent items. However, at the end of range cloning operation we do truncate all the pages in the affected range (in order to ensure future reads will not get stale data). Sometimes this truncation will release the corresponding extent maps besides the pages from the page cache. If this happens, then a "fast" fsync operation will miss logging some extent items, because it relies exclusively on the extent maps being present in the inode's extent tree, leading to data loss/corruption if the fsync ends up using the same transaction used by the clone operation (that transaction was not committed in the meanwhile). An extent map is released through the callback btrfs_invalidatepage(), which gets called by truncate_inode_pages_range(), and it calls __btrfs_releasepage(). The later ends up calling try_release_extent_mapping() which will release the extent map if some conditions are met, like the file size being greater than 16Mb, gfp flags allow blocking and the range not being locked (which is the case during the clone operation) nor being the extent map flagged as pinned (also the case for cloning). The following example, turned into a test for fstests, reproduces the issue: $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /mnt $ xfs_io -f -c "pwrite -S 0x18 9000K 6908K" /mnt/foo $ xfs_io -f -c "pwrite -S 0x20 2572K 156K" /mnt/bar $ xfs_io -c "fsync" /mnt/bar # reflink destination offset corresponds to the size of file bar, # 2728Kb minus 4Kb. $ xfs_io -c ""reflink ${SCRATCH_MNT}/foo 0 2724K 15908K" /mnt/bar $ xfs_io -c "fsync" /mnt/bar $ md5sum /mnt/bar 95a95813a8c2abc9aa75a6c2914a077e /mnt/bar $ mount /dev/sdb /mnt $ md5sum /mnt/bar 207fd8d0b161be8a84b945f0df8d5f8d /mnt/bar # digest should be 95a95813a8c2abc9aa75a6c2914a077e like before the # power failure In the above example, the destination offset of the clone operation corresponds to the size of the "bar" file minus 4Kb. So during the clone operation, the extent map covering the range from 2572Kb to 2728Kb gets trimmed so that it ends at offset 2724Kb, and a new extent map covering the range from 2724Kb to 11724Kb is created. So at the end of the clone operation when we ask to truncate the pages in the range from 2724Kb to 2724Kb + 15908Kb, the page invalidation callback ends up removing the new extent map (through try_release_extent_mapping()) when the page at offset 2724Kb is passed to that callback. Fix this by setting the bit BTRFS_INODE_NEEDS_FULL_SYNC whenever an extent map is removed at try_release_extent_mapping(), forcing the next fsync to search for modified extents in the fs/subvolume tree instead of relying on the presence of extent maps in memory. This way we can continue doing a "fast" fsync if the destination range of a clone operation does not overlap with an existing range or if any of the criteria necessary to remove an extent map at try_release_extent_mapping() is not met (file size not bigger then 16Mb or gfp flags do not allow blocking). CC: stable@vger.kernel.org # 3.16+ Signed-off-by: Filipe Manana Signed-off-by: David Sterba --- fs/btrfs/extent_io.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 1aa91d57404a..8fd86e29085f 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -4241,8 +4241,9 @@ int try_release_extent_mapping(struct page *page, gfp_t mask) struct extent_map *em; u64 start = page_offset(page); u64 end = start + PAGE_SIZE - 1; - struct extent_io_tree *tree = &BTRFS_I(page->mapping->host)->io_tree; - struct extent_map_tree *map = &BTRFS_I(page->mapping->host)->extent_tree; + struct btrfs_inode *btrfs_inode = BTRFS_I(page->mapping->host); + struct extent_io_tree *tree = &btrfs_inode->io_tree; + struct extent_map_tree *map = &btrfs_inode->extent_tree; if (gfpflags_allow_blocking(mask) && page->mapping->host->i_size > SZ_16M) { @@ -4265,6 +4266,8 @@ int try_release_extent_mapping(struct page *page, gfp_t mask) extent_map_end(em) - 1, EXTENT_LOCKED | EXTENT_WRITEBACK, 0, NULL)) { + set_bit(BTRFS_INODE_NEEDS_FULL_SYNC, + &btrfs_inode->runtime_flags); remove_extent_mapping(map, em); /* once for the rb tree */ free_extent_map(em); -- cgit v1.2.3 From 868e49a4a00afaca07d2c450a02e49581eaece6c Mon Sep 17 00:00:00 2001 From: Stuart Henderson Date: Thu, 19 Jul 2018 11:50:37 +0100 Subject: ASoC: wm_adsp: Ensure DSP boot work complete before preloader_put return All controls derived from the loaded firmware should be created prior to returning from the preloader's put function, such that they are immediately available to user-space. Signed-off-by: Stuart Henderson Signed-off-by: Charles Keepax Signed-off-by: Mark Brown --- sound/soc/codecs/wm_adsp.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/codecs/wm_adsp.c b/sound/soc/codecs/wm_adsp.c index b7b914963c62..4e7f8525449e 100644 --- a/sound/soc/codecs/wm_adsp.c +++ b/sound/soc/codecs/wm_adsp.c @@ -2672,6 +2672,8 @@ int wm_adsp2_preloader_put(struct snd_kcontrol *kcontrol, snd_soc_dapm_sync(dapm); + flush_work(&dsp->boot_work); + return 0; } EXPORT_SYMBOL_GPL(wm_adsp2_preloader_put); -- cgit v1.2.3 From 517ee74e1b3124b696f293aa4e220418f8125b4c Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Thu, 19 Jul 2018 11:50:35 +0100 Subject: ASoC: wm_adsp: Correct algorithm list allocation size Commit 6396bb221514 ("treewide: kzalloc() -> kcalloc()") was overlooked when doing some refactoring to the algorithm list handling, which lead to twice as much buffer being allocated as required for reading the algorithm list. A kcalloc is no longer appropriate since the allocation size is now in bytes not registers, as such change back to kzalloc. Fixes: 7f7cca08abf4 ("ASoC: wm_adsp: Simplify handling of alg offset and length") Signed-off-by: Charles Keepax Signed-off-by: Mark Brown --- sound/soc/codecs/wm_adsp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm_adsp.c b/sound/soc/codecs/wm_adsp.c index 07c17acc8a4f..99108d18de8d 100644 --- a/sound/soc/codecs/wm_adsp.c +++ b/sound/soc/codecs/wm_adsp.c @@ -1906,7 +1906,7 @@ static void *wm_adsp_read_algs(struct wm_adsp *dsp, size_t n_algs, /* Convert length from DSP words to bytes */ len *= sizeof(u32); - alg = kcalloc(len, 2, GFP_KERNEL | GFP_DMA); + alg = kzalloc(len, GFP_KERNEL | GFP_DMA); if (!alg) return ERR_PTR(-ENOMEM); -- cgit v1.2.3 From b7ede5af62ab6bfad0980fad58e82d3fb56866df Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Thu, 19 Jul 2018 11:50:36 +0100 Subject: ASoC: wm_adsp: Take prefix into account in control name length Currently when creating ALSA control names for the DSP the length of any prefix applied to the CODEC is not taken into account. Whilst this is mostly harmless it does result in ALSA doing the truncation of the control names and printing a warning. It is better to have the driver do the truncation so it can truncate from the start of parameter name itself to give a greater chance of the result maintain a unique name. Signed-off-by: Charles Keepax Signed-off-by: Mark Brown --- sound/soc/codecs/wm_adsp.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/soc/codecs/wm_adsp.c b/sound/soc/codecs/wm_adsp.c index 99108d18de8d..eec73c98a141 100644 --- a/sound/soc/codecs/wm_adsp.c +++ b/sound/soc/codecs/wm_adsp.c @@ -1343,6 +1343,9 @@ static int wm_adsp_create_control(struct wm_adsp *dsp, int avail = SNDRV_CTL_ELEM_ID_NAME_MAXLEN - ret - 2; int skip = 0; + if (dsp->component->name_prefix) + avail -= strlen(dsp->component->name_prefix) + 1; + if (subname_len > avail) skip = subname_len - avail; -- cgit v1.2.3 From 3bbc2705a3d132b9a86a0e4083f82a2b3c9bfdfd Mon Sep 17 00:00:00 2001 From: Richard Fitzgerald Date: Thu, 19 Jul 2018 11:50:38 +0100 Subject: ASoC: wm_adsp: Allow up to 8 channels for voice control Newer voice control firmwares can capture multiple audio channels. Allow up to 8 channels for future-proofing. Signed-off-by: Richard Fitzgerald Signed-off-by: Charles Keepax Signed-off-by: Mark Brown --- sound/soc/codecs/wm_adsp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm_adsp.c b/sound/soc/codecs/wm_adsp.c index eec73c98a141..aeb1b8c27670 100644 --- a/sound/soc/codecs/wm_adsp.c +++ b/sound/soc/codecs/wm_adsp.c @@ -418,7 +418,7 @@ static const struct wm_adsp_fw_caps ctrl_caps[] = { { .id = SND_AUDIOCODEC_BESPOKE, .desc = { - .max_ch = 1, + .max_ch = 8, .sample_rates = { 16000 }, .num_sample_rates = 1, .formats = SNDRV_PCM_FMTBIT_S16_LE, -- cgit v1.2.3 From d52ed4b0bc73c1c7816f5b7a36229a95acfc76c8 Mon Sep 17 00:00:00 2001 From: Richard Fitzgerald Date: Thu, 19 Jul 2018 11:50:39 +0100 Subject: ASoC: wm_adsp: Parse HOST_BUFFER controls Currently the compressed streams in DSP firmwares are identified essentially by looking at a fixed location inside the firmware. This is fragile and also limits things to a single compressed stream. Here a new form of firmware parameter is added, the HOST_BUFFER which identifies a compressed stream from meta-data in the firmware file. This is more robust and allows for the possiblity of using multiple streams per core in the future. Currently the implementation is still limited to a single stream and will use the first HOST_BUFFER parameter encountered. If there aren't any HOST_BUFFER parameters it will fall back to the legacy way of finding the host buffer. Signed-off-by: Richard Fitzgerald Signed-off-by: Charles Keepax Signed-off-by: Mark Brown --- sound/soc/codecs/wm_adsp.c | 66 +++++++++++++++++++++++++++++++++++++++++++++- sound/soc/codecs/wmfw.h | 1 + 2 files changed, 66 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm_adsp.c b/sound/soc/codecs/wm_adsp.c index aeb1b8c27670..e39b0e0b04df 100644 --- a/sound/soc/codecs/wm_adsp.c +++ b/sound/soc/codecs/wm_adsp.c @@ -1607,6 +1607,15 @@ static int wm_adsp_parse_coeff(struct wm_adsp *dsp, if (ret) return -EINVAL; break; + case WMFW_CTL_TYPE_HOST_BUFFER: + ret = wm_adsp_check_coeff_flags(dsp, &coeff_blk, + WMFW_CTL_FLAG_SYS | + WMFW_CTL_FLAG_VOLATILE | + WMFW_CTL_FLAG_READABLE, + 0); + if (ret) + return -EINVAL; + break; default: adsp_err(dsp, "Unknown control type: %d\n", coeff_blk.ctl_type); @@ -3200,7 +3209,7 @@ static inline int wm_adsp_buffer_write(struct wm_adsp_compr_buf *buf, buf->host_buf_ptr + field_offset, data); } -static int wm_adsp_buffer_locate(struct wm_adsp_compr_buf *buf) +static int wm_adsp_legacy_host_buf_addr(struct wm_adsp_compr_buf *buf) { struct wm_adsp_alg_region *alg_region; struct wm_adsp *dsp = buf->dsp; @@ -3239,6 +3248,61 @@ static int wm_adsp_buffer_locate(struct wm_adsp_compr_buf *buf) return 0; } +static struct wm_coeff_ctl * +wm_adsp_find_host_buffer_ctrl(struct wm_adsp_compr_buf *buf) +{ + struct wm_adsp *dsp = buf->dsp; + struct wm_coeff_ctl *ctl; + + list_for_each_entry(ctl, &dsp->ctl_list, list) { + if (ctl->type != WMFW_CTL_TYPE_HOST_BUFFER) + continue; + + if (!ctl->enabled) + continue; + + return ctl; + } + + return NULL; +} + +static int wm_adsp_buffer_locate(struct wm_adsp_compr_buf *buf) +{ + struct wm_adsp *dsp = buf->dsp; + struct wm_coeff_ctl *ctl; + unsigned int reg; + u32 val; + int i, ret; + + ctl = wm_adsp_find_host_buffer_ctrl(buf); + if (!ctl) + return wm_adsp_legacy_host_buf_addr(buf); + + ret = wm_coeff_base_reg(ctl, ®); + if (ret) + return ret; + + for (i = 0; i < 5; ++i) { + ret = regmap_raw_read(dsp->regmap, reg, &val, sizeof(val)); + if (ret < 0) + return ret; + + if (val) + break; + + usleep_range(1000, 2000); + } + + if (!val) + return -EIO; + + buf->host_buf_ptr = be32_to_cpu(val); + adsp_dbg(dsp, "host_buf_ptr=%x\n", buf->host_buf_ptr); + + return 0; +} + static int wm_adsp_buffer_populate(struct wm_adsp_compr_buf *buf) { const struct wm_adsp_fw_caps *caps = wm_adsp_fw[buf->dsp->fw].caps; diff --git a/sound/soc/codecs/wmfw.h b/sound/soc/codecs/wmfw.h index ec78b9da020f..0c3f50acb8b1 100644 --- a/sound/soc/codecs/wmfw.h +++ b/sound/soc/codecs/wmfw.h @@ -29,6 +29,7 @@ /* Non-ALSA coefficient types start at 0x1000 */ #define WMFW_CTL_TYPE_ACKED 0x1000 /* acked control */ #define WMFW_CTL_TYPE_HOSTEVENT 0x1001 /* event control */ +#define WMFW_CTL_TYPE_HOST_BUFFER 0x1002 /* host buffer pointer */ struct wmfw_header { char magic[4]; -- cgit v1.2.3 From 2c4d6baf1bc4f7729773ffcee9ba2a9781578633 Mon Sep 17 00:00:00 2001 From: "Robin H. Johnson" Date: Fri, 13 Jul 2018 20:50:47 +0000 Subject: ACPI / EC: Use ec_no_wakeup on more Thinkpad X1 Carbon 6th systems The ec_no_wakeup matcher added for Thinkpad X1 Carbon 6th gen systems beyond matched only a single DMI model (20KGS3JF01), that didn't cover my laptop (20KH002JUS). Change to match based on DMI product family to cover all X1 6th gen systems. Signed-off-by: Robin H. Johnson Signed-off-by: Rafael J. Wysocki --- drivers/acpi/ec.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 442a9e24f439..917f77f4cb55 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -2042,7 +2042,7 @@ static const struct dmi_system_id acpi_ec_no_wakeup[] = { .ident = "Thinkpad X1 Carbon 6th", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), - DMI_MATCH(DMI_PRODUCT_NAME, "20KGS3JF01"), + DMI_MATCH(DMI_PRODUCT_FAMILY, "Thinkpad X1 Carbon 6th"), }, }, { }, -- cgit v1.2.3 From eea1662525bd4a158a67ac836b2a1fd9cf77cc81 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 18 Jul 2018 22:55:37 +0200 Subject: ASoC: rt5651: Add IN3 Boost volume control Add a mixer control for the IN3 Boost volume, IN3 is used for the headset mic on most devices, so this is necessary to control the headset mic volume. Signed-off-by: Hans de Goede Signed-off-by: Mark Brown --- sound/soc/codecs/rt5651.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/rt5651.c b/sound/soc/codecs/rt5651.c index 0462049e739c..985852fd9723 100644 --- a/sound/soc/codecs/rt5651.c +++ b/sound/soc/codecs/rt5651.c @@ -331,11 +331,13 @@ static const struct snd_kcontrol_new rt5651_snd_controls[] = { SOC_DOUBLE_TLV("Mono DAC Playback Volume", RT5651_DAC2_DIG_VOL, RT5651_L_VOL_SFT, RT5651_R_VOL_SFT, 175, 0, dac_vol_tlv), - /* IN1/IN2 Control */ + /* IN1/IN2/IN3 Control */ SOC_SINGLE_TLV("IN1 Boost", RT5651_IN1_IN2, RT5651_BST_SFT1, 8, 0, bst_tlv), SOC_SINGLE_TLV("IN2 Boost", RT5651_IN1_IN2, RT5651_BST_SFT2, 8, 0, bst_tlv), + SOC_SINGLE_TLV("IN3 Boost", RT5651_IN3, + RT5651_BST_SFT1, 8, 0, bst_tlv), /* INL/INR Volume Control */ SOC_DOUBLE_TLV("IN Capture Volume", RT5651_INL1_INR1_VOL, RT5651_INL_VOL_SFT, RT5651_INR_VOL_SFT, -- cgit v1.2.3 From 0a3badd141f78535315cca9ff5062a7ebf414281 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 18 Jul 2018 22:55:38 +0200 Subject: ASoC: Intel: bytcr_rt5651: Fix using the wrong GPIO for the ext-amp on some boards Some boards have I2cSerialBusV2, GpioIo, GpioInt as ACPI resources, other boards may have I2cSerialBusV2, GpioInt, GpioIo instead. We want the GpioIo one for the ext-amp-enable-gpio. So far we've been assuming that the GpioIo one always comes first, this commit adds code to detect which one comes first and to add the right gpio-mapping. This fixes sound not working on the Vios LTH17 laptop. Signed-off-by: Hans de Goede Acked-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- sound/soc/intel/boards/bytcr_rt5651.c | 69 +++++++++++++++++++++++++++++++++-- 1 file changed, 65 insertions(+), 4 deletions(-) diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c index b687043c8425..601e47c33ba8 100644 --- a/sound/soc/intel/boards/bytcr_rt5651.c +++ b/sound/soc/intel/boards/bytcr_rt5651.c @@ -747,13 +747,74 @@ static const struct x86_cpu_id cherrytrail_cpu_ids[] = { {} }; -static const struct acpi_gpio_params ext_amp_enable_gpios = { 0, 0, false }; +static const struct acpi_gpio_params first_gpio = { 0, 0, false }; +static const struct acpi_gpio_params second_gpio = { 1, 0, false }; -static const struct acpi_gpio_mapping byt_rt5651_gpios[] = { - { "ext-amp-enable-gpios", &ext_amp_enable_gpios, 1 }, +static const struct acpi_gpio_mapping byt_rt5651_amp_en_first[] = { + { "ext-amp-enable-gpios", &first_gpio, 1 }, { }, }; +static const struct acpi_gpio_mapping byt_rt5651_amp_en_second[] = { + { "ext-amp-enable-gpios", &second_gpio, 1 }, + { }, +}; + +/* + * Some boards have I2cSerialBusV2, GpioIo, GpioInt as ACPI resources, other + * boards may have I2cSerialBusV2, GpioInt, GpioIo instead. We want the + * GpioIo one for the ext-amp-enable-gpio and both count for the index in + * acpi_gpio_params index. So we have 2 different mappings and the code + * below figures out which one to use. + */ +struct byt_rt5651_acpi_resource_data { + int gpio_count; + int gpio_int_idx; +}; + +static int snd_byt_rt5651_acpi_resource(struct acpi_resource *ares, void *arg) +{ + struct byt_rt5651_acpi_resource_data *data = arg; + + if (ares->type != ACPI_RESOURCE_TYPE_GPIO) + return 0; + + if (ares->data.gpio.connection_type == ACPI_RESOURCE_GPIO_TYPE_INT) + data->gpio_int_idx = data->gpio_count; + + data->gpio_count++; + return 0; +} + +static void snd_byt_rt5651_mc_add_amp_en_gpio_mapping(struct device *codec) +{ + struct byt_rt5651_acpi_resource_data data = { 0, -1 }; + LIST_HEAD(resources); + int ret; + + ret = acpi_dev_get_resources(ACPI_COMPANION(codec), &resources, + snd_byt_rt5651_acpi_resource, &data); + if (ret < 0) { + dev_warn(codec, "Failed to get ACPI resources, not adding external amplifier GPIO mapping\n"); + return; + } + + /* All info we need is gathered during the walk */ + acpi_dev_free_resource_list(&resources); + + switch (data.gpio_int_idx) { + case 0: + devm_acpi_dev_add_driver_gpios(codec, byt_rt5651_amp_en_second); + break; + case 1: + devm_acpi_dev_add_driver_gpios(codec, byt_rt5651_amp_en_first); + break; + default: + dev_warn(codec, "Unknown GpioInt index %d, not adding external amplifier GPIO mapping\n", + data.gpio_int_idx); + } +} + struct acpi_chan_package { /* ACPICA seems to require 64 bit integers */ u64 aif_value; /* 1: AIF1, 2: AIF2 */ u64 mclock_value; /* usually 25MHz (0x17d7940), ignored */ @@ -876,7 +937,7 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev) /* Cherry Trail devices use an external amplifier enable gpio */ if (x86_match_cpu(cherrytrail_cpu_ids)) { - devm_acpi_dev_add_driver_gpios(codec_dev, byt_rt5651_gpios); + snd_byt_rt5651_mc_add_amp_en_gpio_mapping(codec_dev); priv->ext_amp_gpio = devm_fwnode_get_index_gpiod_from_child( &pdev->dev, "ext-amp-enable", 0, codec_dev->fwnode, -- cgit v1.2.3 From 8627fb257e1673d2c2277494545642921097da86 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 18 Jul 2018 22:55:39 +0200 Subject: ASoC: Intel: bytcr_rt5651: Set OVCD limit for VIOS LTH17 to 2000uA With the default over current detect limit of 1500uA headsets on often get detected as headphones on the VIOS LTH17 and even when detected as headset the OVCD current triggers often while plugged in, resulting in false-positive button press detection. Signed-off-by: Hans de Goede Acked-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- sound/soc/intel/boards/bytcr_rt5651.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c index 601e47c33ba8..53ac97c15fc6 100644 --- a/sound/soc/intel/boards/bytcr_rt5651.c +++ b/sound/soc/intel/boards/bytcr_rt5651.c @@ -414,8 +414,11 @@ static const struct dmi_system_id byt_rt5651_quirk_table[] = { DMI_MATCH(DMI_SYS_VENDOR, "VIOS"), DMI_MATCH(DMI_PRODUCT_NAME, "LTH17"), }, - .driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS | - BYT_RT5651_IN1_IN2_MAP), + .driver_data = (void *)(BYT_RT5651_IN1_IN2_MAP | + BYT_RT5651_JD1_1 | + BYT_RT5651_OVCD_TH_2000UA | + BYT_RT5651_OVCD_SF_1P0 | + BYT_RT5651_MCLK_EN), }, {} }; -- cgit v1.2.3 From ac275ee5aa67abe9b65d66071ee333c6b0905b93 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 18 Jul 2018 22:55:40 +0200 Subject: ASoC: Intel: bytcr_rt5651: Add IN2 input mapping During the recent cleanup series 3 of the 6 input mappings where removed from the bytcr_rt5651 machine driver because testing showed that none of them were used. However some devices do actually have their internal mic on IN2 (and only IN2, not IN1 and IN2), this did not show during previous tests due to a bug in the userspace UCM input device switching code. This commit re-adds the IN2 mapping for devices with the internal mic. on IN2 and the headser mic on IN3 and enables this mapping on devices with their internal mic on IN2. This commit also changes the default internal mic input to IN2, because all my 7 test devices have their mic there. Signed-off-by: Hans de Goede Acked-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- sound/soc/intel/boards/bytcr_rt5651.c | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-) diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c index 53ac97c15fc6..d85530b1cc8e 100644 --- a/sound/soc/intel/boards/bytcr_rt5651.c +++ b/sound/soc/intel/boards/bytcr_rt5651.c @@ -44,6 +44,7 @@ enum { BYT_RT5651_DMIC_MAP, BYT_RT5651_IN1_MAP, + BYT_RT5651_IN2_MAP, BYT_RT5651_IN1_IN2_MAP, }; @@ -93,9 +94,9 @@ struct byt_rt5651_private { struct snd_soc_jack jack; }; -/* Default: jack-detect on JD1_1, internal mic on in1, headsetmic on in3 */ +/* Default: jack-detect on JD1_1, internal mic on in2, headsetmic on in3 */ static unsigned long byt_rt5651_quirk = BYT_RT5651_DEFAULT_QUIRKS | - BYT_RT5651_IN1_MAP; + BYT_RT5651_IN2_MAP; static void log_quirks(struct device *dev) { @@ -103,6 +104,8 @@ static void log_quirks(struct device *dev) dev_info(dev, "quirk DMIC_MAP enabled"); if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN1_MAP) dev_info(dev, "quirk IN1_MAP enabled"); + if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN2_MAP) + dev_info(dev, "quirk IN2_MAP enabled"); if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN1_IN2_MAP) dev_info(dev, "quirk IN1_IN2_MAP enabled"); if (BYT_RT5651_JDSRC(byt_rt5651_quirk)) { @@ -270,6 +273,12 @@ static const struct snd_soc_dapm_route byt_rt5651_intmic_in1_map[] = { {"IN3P", NULL, "Headset Mic"}, }; +static const struct snd_soc_dapm_route byt_rt5651_intmic_in2_map[] = { + {"Internal Mic", NULL, "micbias1"}, + {"IN2P", NULL, "Internal Mic"}, + {"IN3P", NULL, "Headset Mic"}, +}; + static const struct snd_soc_dapm_route byt_rt5651_intmic_in1_in2_map[] = { {"Internal Mic", NULL, "micbias1"}, {"IN1P", NULL, "Internal Mic"}, @@ -364,7 +373,7 @@ static const struct dmi_system_id byt_rt5651_quirk_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "X1D3_C806N"), }, .driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS | - BYT_RT5651_IN1_MAP | + BYT_RT5651_IN2_MAP | BYT_RT5651_HP_LR_SWAPPED), }, { @@ -375,7 +384,7 @@ static const struct dmi_system_id byt_rt5651_quirk_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "D2D3_Vi8A1"), }, .driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS | - BYT_RT5651_IN1_MAP | + BYT_RT5651_IN2_MAP | BYT_RT5651_HP_LR_SWAPPED), }, { @@ -468,6 +477,10 @@ static int byt_rt5651_init(struct snd_soc_pcm_runtime *runtime) custom_map = byt_rt5651_intmic_in1_map; num_routes = ARRAY_SIZE(byt_rt5651_intmic_in1_map); break; + case BYT_RT5651_IN2_MAP: + custom_map = byt_rt5651_intmic_in2_map; + num_routes = ARRAY_SIZE(byt_rt5651_intmic_in2_map); + break; case BYT_RT5651_IN1_IN2_MAP: custom_map = byt_rt5651_intmic_in1_in2_map; num_routes = ARRAY_SIZE(byt_rt5651_intmic_in1_in2_map); @@ -825,7 +838,7 @@ struct acpi_chan_package { /* ACPICA seems to require 64 bit integers */ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev) { - const char * const mic_name[] = { "dmic", "in1", "in12" }; + const char * const mic_name[] = { "dmic", "in1", "in2", "in12" }; struct byt_rt5651_private *priv; struct snd_soc_acpi_mach *mach; struct device *codec_dev; -- cgit v1.2.3 From a0d1d867c262f4ad5d8e4925e2212711ebdbf2b7 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 18 Jul 2018 22:55:41 +0200 Subject: ASoC: Intel: bytcr_rt5651: Add mono speaker quirk During my initial round of bytcr_rt5651 long-name patches I did not include a difference for mono vs stereo speaker setups in the longname because it seems that all 5651 devices with only a single speaker do some mixing of left + right on the PCB. However further testing has shown that while this works great when only playing audio on the left or right channel, the output becomes garbled when using both channels at once. Something which does not happen when using the Stereo DAC MIXL / MIXR switches to mix the channels together inside the codec and then only outputting on a single channel. So we need to have separate UCM profiles and thus separate long-names for devices with a mono speaker vs stereo speakers. Just as we already have for the bytcr_rt5640 case. This commit adds a new BYT_RT5651_MONO_SPEAKER quirk and adds "stereo-spk" or "mono-spk" to the long-name based on this and enables this mapping on devices with a mono speaker. Changing the long-name like this is ok for now, since I'm still working on the UCM profiles, so they are not in upstream alsa-lib yet. This brings the long-name naming scheme fully in sync with the bytcr_rt5640 case, which is good from a consistency pov. Signed-off-by: Hans de Goede Acked-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- sound/soc/intel/boards/bytcr_rt5651.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c index d85530b1cc8e..8374e633796d 100644 --- a/sound/soc/intel/boards/bytcr_rt5651.c +++ b/sound/soc/intel/boards/bytcr_rt5651.c @@ -79,6 +79,7 @@ enum { #define BYT_RT5651_SSP0_AIF1 BIT(20) #define BYT_RT5651_SSP0_AIF2 BIT(21) #define BYT_RT5651_HP_LR_SWAPPED BIT(22) +#define BYT_RT5651_MONO_SPEAKER BIT(23) #define BYT_RT5651_DEFAULT_QUIRKS (BYT_RT5651_MCLK_EN | \ BYT_RT5651_JD1_1 | \ @@ -128,6 +129,8 @@ static void log_quirks(struct device *dev) dev_info(dev, "quirk SSP0_AIF1 enabled\n"); if (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF2) dev_info(dev, "quirk SSP0_AIF2 enabled\n"); + if (byt_rt5651_quirk & BYT_RT5651_MONO_SPEAKER) + dev_info(dev, "quirk MONO_SPEAKER enabled\n"); } #define BYT_CODEC_DAI1 "rt5651-aif1" @@ -374,7 +377,8 @@ static const struct dmi_system_id byt_rt5651_quirk_table[] = { }, .driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS | BYT_RT5651_IN2_MAP | - BYT_RT5651_HP_LR_SWAPPED), + BYT_RT5651_HP_LR_SWAPPED | + BYT_RT5651_MONO_SPEAKER), }, { /* Chuwi Vi8 Plus (CWI519) */ @@ -385,7 +389,8 @@ static const struct dmi_system_id byt_rt5651_quirk_table[] = { }, .driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS | BYT_RT5651_IN2_MAP | - BYT_RT5651_HP_LR_SWAPPED), + BYT_RT5651_HP_LR_SWAPPED | + BYT_RT5651_MONO_SPEAKER), }, { /* KIANO SlimNote 14.2 */ @@ -700,7 +705,7 @@ static struct snd_soc_dai_link byt_rt5651_dais[] = { static char byt_rt5651_codec_name[SND_ACPI_I2C_ID_LEN]; static char byt_rt5651_codec_aif_name[12]; /* = "rt5651-aif[1|2]" */ static char byt_rt5651_cpu_dai_name[10]; /* = "ssp[0|2]-port" */ -static char byt_rt5651_long_name[40]; /* = "bytcr-rt5651-*-mic[-swapped-hp]" */ +static char byt_rt5651_long_name[50]; /* = "bytcr-rt5651-*-spk-*-mic[-swapped-hp]" */ static int byt_rt5651_suspend(struct snd_soc_card *card) { @@ -1025,7 +1030,9 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev) hp_swapped = ""; snprintf(byt_rt5651_long_name, sizeof(byt_rt5651_long_name), - "bytcr-rt5651-%s-mic%s", + "bytcr-rt5651-%s-spk-%s-mic%s", + (byt_rt5651_quirk & BYT_RT5651_MONO_SPEAKER) ? + "mono" : "stereo", mic_name[BYT_RT5651_MAP(byt_rt5651_quirk)], hp_swapped); byt_rt5651_card.long_name = byt_rt5651_long_name; -- cgit v1.2.3 From 06aa6e51273c9ac458af0bb9be95603cfbad14ec Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 18 Jul 2018 22:55:42 +0200 Subject: ASoC: Intel: bytcr_rt5651: Add quirk table entries for various devices Add quirk table entries for the following tablets: ITWorks TW701 Ployer Momo7w Trekstor win7 Yours 8" These all use the default settings, except that they only have a single speaker and thus need the mono-speaker quirk. Signed-off-by: Hans de Goede Acked-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- sound/soc/intel/boards/bytcr_rt5651.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c index 8374e633796d..f8a68bdb3885 100644 --- a/sound/soc/intel/boards/bytcr_rt5651.c +++ b/sound/soc/intel/boards/bytcr_rt5651.c @@ -392,6 +392,21 @@ static const struct dmi_system_id byt_rt5651_quirk_table[] = { BYT_RT5651_HP_LR_SWAPPED | BYT_RT5651_MONO_SPEAKER), }, + { + /* I.T.Works TW701, Ployer Momo7w and Trekstor ST70416-6 + * (these all use the same mainboard) */ + .callback = byt_rt5651_quirk_cb, + .matches = { + DMI_MATCH(DMI_BIOS_VENDOR, "INSYDE Corp."), + /* Partial match for all of itWORKS.G.WI71C.JGBMRBA, + * TREK.G.WI71C.JGBMRBA0x and MOMO.G.WI71C.MABMRBA02 */ + DMI_MATCH(DMI_BIOS_VERSION, ".G.WI71C."), + }, + .driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS | + BYT_RT5651_IN2_MAP | + BYT_RT5651_SSP0_AIF1 | + BYT_RT5651_MONO_SPEAKER), + }, { /* KIANO SlimNote 14.2 */ .callback = byt_rt5651_quirk_cb, @@ -434,6 +449,19 @@ static const struct dmi_system_id byt_rt5651_quirk_table[] = { BYT_RT5651_OVCD_SF_1P0 | BYT_RT5651_MCLK_EN), }, + { + /* Yours Y8W81 (and others using the same mainboard) */ + .callback = byt_rt5651_quirk_cb, + .matches = { + DMI_MATCH(DMI_BIOS_VENDOR, "INSYDE Corp."), + /* Partial match for all devs with a W86C mainboard */ + DMI_MATCH(DMI_BIOS_VERSION, ".F.W86C."), + }, + .driver_data = (void *)(BYT_RT5651_DEFAULT_QUIRKS | + BYT_RT5651_IN2_MAP | + BYT_RT5651_SSP0_AIF1 | + BYT_RT5651_MONO_SPEAKER), + }, {} }; -- cgit v1.2.3 From 9ee6f8a8cbbd203fb0a844f937007a9525422697 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 1 Jul 2018 11:30:23 +0200 Subject: ASoC: Intel: bytcr_rt5640: Add quirk for the "Connect Tablet 9" tablet Add a quirk for the "Connect Tablet 9" tablet, this tablet has a mono-speaker. Otherwise it works fine with the defaults. Signed-off-by: Hans de Goede Acked-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- sound/soc/intel/boards/bytcr_rt5640.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index 657910a08261..d32844f94d74 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -486,6 +486,16 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { }, .driver_data = (void *)(BYT_RT5640_DMIC1_MAP), }, + { /* Connect Tablet 9 */ + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Connect"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Tablet 9"), + }, + .driver_data = (void *)(BYTCR_INPUT_DEFAULTS | + BYT_RT5640_MONO_SPEAKER | + BYT_RT5640_SSP0_AIF1 | + BYT_RT5640_MCLK_EN), + }, { .matches = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Dell Inc."), -- cgit v1.2.3 From af1fc5baa724c63ce1733dfcf855bad5ef6078e3 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Tue, 17 Jul 2018 15:21:56 -0700 Subject: ARCv2: [plat-hsdk]: Save accl reg pair by default This manifsted as strace segfaulting on HSDK because gcc was targetting the accumulator registers as GPRs, which kernek was not saving/restoring by default. Cc: stable@vger.kernel.org #4.14+ Signed-off-by: Vineet Gupta --- arch/arc/Kconfig | 2 +- arch/arc/plat-hsdk/Kconfig | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index d76bf4a83740..bc0bcf01ec98 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -408,7 +408,7 @@ config ARC_HAS_DIV_REM config ARC_HAS_ACCL_REGS bool "Reg Pair ACCL:ACCH (FPU and/or MPY > 6)" - default n + default y help Depending on the configuration, CPU can contain accumulator reg-pair (also referred to as r58:r59). These can also be used by gcc as GPR so diff --git a/arch/arc/plat-hsdk/Kconfig b/arch/arc/plat-hsdk/Kconfig index 556bc5ef1257..9356753c2ed8 100644 --- a/arch/arc/plat-hsdk/Kconfig +++ b/arch/arc/plat-hsdk/Kconfig @@ -7,6 +7,8 @@ menuconfig ARC_SOC_HSDK bool "ARC HS Development Kit SOC" + depends on ISA_ARCV2 + select ARC_HAS_ACCL_REGS select CLK_HSDK select RESET_HSDK select MIGHT_HAVE_PCI -- cgit v1.2.3 From b9c1e60e7bf4e64ac1b4f4d6d593f0bb57886973 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Thu, 19 Jul 2018 18:18:35 +0200 Subject: bpf, ppc64: fix unexpected r0=0 exit path inside bpf_xadd None of the JITs is allowed to implement exit paths from the BPF insn mappings other than BPF_JMP | BPF_EXIT. In the BPF core code we have a couple of rewrites in eBPF (e.g. LD_ABS / LD_IND) and in eBPF to cBPF translation to retain old existing behavior where exceptions may occur; they are also tightly controlled by the verifier where it disallows some of the features such as BPF to BPF calls when legacy LD_ABS / LD_IND ops are present in the BPF program. During recent review of all BPF_XADD JIT implementations I noticed that the ppc64 one is buggy in that it contains two jumps to exit paths. This is problematic as this can bypass verifier expectations e.g. pointed out in commit f6b1b3bf0d5f ("bpf: fix subprog verifier bypass by div/mod by 0 exception"). The first exit path is obsoleted by the fix in ca36960211eb ("bpf: allow xadd only on aligned memory") anyway, and for the second one we need to do a fetch, add and store loop if the reservation from lwarx/ldarx was lost in the meantime. Fixes: 156d0e290e96 ("powerpc/ebpf/jit: Implement JIT compiler for extended BPF") Reviewed-by: Naveen N. Rao Reviewed-by: Sandipan Das Tested-by: Sandipan Das Signed-off-by: Daniel Borkmann Signed-off-by: Alexei Starovoitov --- arch/powerpc/net/bpf_jit_comp64.c | 29 +++++------------------------ 1 file changed, 5 insertions(+), 24 deletions(-) diff --git a/arch/powerpc/net/bpf_jit_comp64.c b/arch/powerpc/net/bpf_jit_comp64.c index 380cbf9a40d9..c0a9bcd28356 100644 --- a/arch/powerpc/net/bpf_jit_comp64.c +++ b/arch/powerpc/net/bpf_jit_comp64.c @@ -286,6 +286,7 @@ static int bpf_jit_build_body(struct bpf_prog *fp, u32 *image, u64 imm64; u8 *func; u32 true_cond; + u32 tmp_idx; /* * addrs[] maps a BPF bytecode address into a real offset from @@ -637,11 +638,7 @@ emit_clear: case BPF_STX | BPF_XADD | BPF_W: /* Get EA into TMP_REG_1 */ PPC_ADDI(b2p[TMP_REG_1], dst_reg, off); - /* error if EA is not word-aligned */ - PPC_ANDI(b2p[TMP_REG_2], b2p[TMP_REG_1], 0x03); - PPC_BCC_SHORT(COND_EQ, (ctx->idx * 4) + 12); - PPC_LI(b2p[BPF_REG_0], 0); - PPC_JMP(exit_addr); + tmp_idx = ctx->idx * 4; /* load value from memory into TMP_REG_2 */ PPC_BPF_LWARX(b2p[TMP_REG_2], 0, b2p[TMP_REG_1], 0); /* add value from src_reg into this */ @@ -649,32 +646,16 @@ emit_clear: /* store result back */ PPC_BPF_STWCX(b2p[TMP_REG_2], 0, b2p[TMP_REG_1]); /* we're done if this succeeded */ - PPC_BCC_SHORT(COND_EQ, (ctx->idx * 4) + (7*4)); - /* otherwise, let's try once more */ - PPC_BPF_LWARX(b2p[TMP_REG_2], 0, b2p[TMP_REG_1], 0); - PPC_ADD(b2p[TMP_REG_2], b2p[TMP_REG_2], src_reg); - PPC_BPF_STWCX(b2p[TMP_REG_2], 0, b2p[TMP_REG_1]); - /* exit if the store was not successful */ - PPC_LI(b2p[BPF_REG_0], 0); - PPC_BCC(COND_NE, exit_addr); + PPC_BCC_SHORT(COND_NE, tmp_idx); break; /* *(u64 *)(dst + off) += src */ case BPF_STX | BPF_XADD | BPF_DW: PPC_ADDI(b2p[TMP_REG_1], dst_reg, off); - /* error if EA is not doubleword-aligned */ - PPC_ANDI(b2p[TMP_REG_2], b2p[TMP_REG_1], 0x07); - PPC_BCC_SHORT(COND_EQ, (ctx->idx * 4) + (3*4)); - PPC_LI(b2p[BPF_REG_0], 0); - PPC_JMP(exit_addr); - PPC_BPF_LDARX(b2p[TMP_REG_2], 0, b2p[TMP_REG_1], 0); - PPC_ADD(b2p[TMP_REG_2], b2p[TMP_REG_2], src_reg); - PPC_BPF_STDCX(b2p[TMP_REG_2], 0, b2p[TMP_REG_1]); - PPC_BCC_SHORT(COND_EQ, (ctx->idx * 4) + (7*4)); + tmp_idx = ctx->idx * 4; PPC_BPF_LDARX(b2p[TMP_REG_2], 0, b2p[TMP_REG_1], 0); PPC_ADD(b2p[TMP_REG_2], b2p[TMP_REG_2], src_reg); PPC_BPF_STDCX(b2p[TMP_REG_2], 0, b2p[TMP_REG_1]); - PPC_LI(b2p[BPF_REG_0], 0); - PPC_BCC(COND_NE, exit_addr); + PPC_BCC_SHORT(COND_NE, tmp_idx); break; /* -- cgit v1.2.3 From fa47a16b04ad896ea9c10d4fa0caf47dcf47cd00 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Thu, 19 Jul 2018 18:18:36 +0200 Subject: bpf: test case to check whether src/dst regs got mangled by xadd We currently do not have such a test case in test_verifier selftests but it's important to test under bpf_jit_enable=1 to make sure JIT implementations do not mistakenly mess with src/dst reg for xadd/{w,dw}. Signed-off-by: Daniel Borkmann Signed-off-by: Alexei Starovoitov --- tools/testing/selftests/bpf/test_verifier.c | 40 +++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) diff --git a/tools/testing/selftests/bpf/test_verifier.c b/tools/testing/selftests/bpf/test_verifier.c index f5f7bcc96046..41106d9d5cc7 100644 --- a/tools/testing/selftests/bpf/test_verifier.c +++ b/tools/testing/selftests/bpf/test_verifier.c @@ -12004,6 +12004,46 @@ static struct bpf_test tests[] = { .errstr = "BPF_XADD stores into R2 packet", .prog_type = BPF_PROG_TYPE_XDP, }, + { + "xadd/w check whether src/dst got mangled, 1", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_MOV64_REG(BPF_REG_6, BPF_REG_0), + BPF_MOV64_REG(BPF_REG_7, BPF_REG_10), + BPF_STX_MEM(BPF_DW, BPF_REG_10, BPF_REG_0, -8), + BPF_STX_XADD(BPF_DW, BPF_REG_10, BPF_REG_0, -8), + BPF_STX_XADD(BPF_DW, BPF_REG_10, BPF_REG_0, -8), + BPF_JMP_REG(BPF_JNE, BPF_REG_6, BPF_REG_0, 3), + BPF_JMP_REG(BPF_JNE, BPF_REG_7, BPF_REG_10, 2), + BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_10, -8), + BPF_EXIT_INSN(), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_EXIT_INSN(), + }, + .result = ACCEPT, + .prog_type = BPF_PROG_TYPE_SCHED_CLS, + .retval = 3, + }, + { + "xadd/w check whether src/dst got mangled, 2", + .insns = { + BPF_MOV64_IMM(BPF_REG_0, 1), + BPF_MOV64_REG(BPF_REG_6, BPF_REG_0), + BPF_MOV64_REG(BPF_REG_7, BPF_REG_10), + BPF_STX_MEM(BPF_W, BPF_REG_10, BPF_REG_0, -8), + BPF_STX_XADD(BPF_W, BPF_REG_10, BPF_REG_0, -8), + BPF_STX_XADD(BPF_W, BPF_REG_10, BPF_REG_0, -8), + BPF_JMP_REG(BPF_JNE, BPF_REG_6, BPF_REG_0, 3), + BPF_JMP_REG(BPF_JNE, BPF_REG_7, BPF_REG_10, 2), + BPF_LDX_MEM(BPF_W, BPF_REG_0, BPF_REG_10, -8), + BPF_EXIT_INSN(), + BPF_MOV64_IMM(BPF_REG_0, 42), + BPF_EXIT_INSN(), + }, + .result = ACCEPT, + .prog_type = BPF_PROG_TYPE_SCHED_CLS, + .retval = 3, + }, { "bpf_get_stack return R0 within range", .insns = { -- cgit v1.2.3 From e3dde080ebbdbb4bda8eee35d770714fee8c59ac Mon Sep 17 00:00:00 2001 From: Quinn Tran Date: Wed, 18 Jul 2018 14:29:51 -0700 Subject: scsi: qla2xxx: Fix unintialized List head crash In case of IOCB Queue full or system where memory is low and driver receives large number of RSCN storm, the stale sp pointer can stay on gpnid_list resulting in page_fault. This patch fixes this issue by initializing the sp->elem list head and removing sp->elem before memory is freed. Following stack trace is seen 9 [ffff987b37d1bc60] page_fault at ffffffffad516768 [exception RIP: qla24xx_async_gpnid+496] 10 [ffff987b37d1bd10] qla24xx_async_gpnid at ffffffffc039866d [qla2xxx] 11 [ffff987b37d1bd80] qla2x00_do_work at ffffffffc036169c [qla2xxx] 12 [ffff987b37d1be38] qla2x00_do_dpc_all_vps at ffffffffc03adfed [qla2xxx] 13 [ffff987b37d1be78] qla2x00_do_dpc at ffffffffc036458a [qla2xxx] 14 [ffff987b37d1bec8] kthread at ffffffffacebae31 Fixes: 2d73ac6102d9 ("scsi: qla2xxx: Serialize GPNID for multiple RSCN") Cc: # v4.17+ Signed-off-by: Quinn Tran Signed-off-by: Himanshu Madhani Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_gs.c | 4 ++++ drivers/scsi/qla2xxx/qla_inline.h | 2 ++ 2 files changed, 6 insertions(+) diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c index 2c35b0b2baa0..7a3744006419 100644 --- a/drivers/scsi/qla2xxx/qla_gs.c +++ b/drivers/scsi/qla2xxx/qla_gs.c @@ -3708,6 +3708,10 @@ int qla24xx_async_gpnid(scsi_qla_host_t *vha, port_id_t *id) return rval; done_free_sp: + spin_lock_irqsave(&vha->hw->vport_slock, flags); + list_del(&sp->elem); + spin_unlock_irqrestore(&vha->hw->vport_slock, flags); + if (sp->u.iocb_cmd.u.ctarg.req) { dma_free_coherent(&vha->hw->pdev->dev, sizeof(struct ct_sns_pkt), diff --git a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h index 37ae0f6d8ae5..59fd5a9dfeb8 100644 --- a/drivers/scsi/qla2xxx/qla_inline.h +++ b/drivers/scsi/qla2xxx/qla_inline.h @@ -222,6 +222,8 @@ qla2xxx_get_qpair_sp(struct qla_qpair *qpair, fc_port_t *fcport, gfp_t flag) sp->fcport = fcport; sp->iocbs = 1; sp->vha = qpair->vha; + INIT_LIST_HEAD(&sp->elem); + done: if (!sp) QLA_QPAIR_MARK_NOT_BUSY(qpair); -- cgit v1.2.3 From efa93f48fa9d423fda166bc3b6c0cbb09682492e Mon Sep 17 00:00:00 2001 From: Quinn Tran Date: Wed, 18 Jul 2018 14:29:52 -0700 Subject: scsi: qla2xxx: Fix NPIV deletion by calling wait_for_sess_deletion Add wait for session deletion to finish before freeing an NPIV scsi host. Fixes: 726b85487067 ("qla2xxx: Add framework for async fabric discovery") Cc: Signed-off-by: Quinn Tran Signed-off-by: Himanshu Madhani Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_attr.c | 1 + drivers/scsi/qla2xxx/qla_gbl.h | 1 + drivers/scsi/qla2xxx/qla_mid.c | 5 +++++ drivers/scsi/qla2xxx/qla_os.c | 2 +- 4 files changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index 89a4999fa631..c8731568f9c4 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -2141,6 +2141,7 @@ qla24xx_vport_delete(struct fc_vport *fc_vport) msleep(1000); qla24xx_disable_vp(vha); + qla2x00_wait_for_sess_deletion(vha); vha->flags.delete_progress = 1; diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index f68eb6096559..2660a48d918a 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -214,6 +214,7 @@ void qla2x00_handle_login_done_event(struct scsi_qla_host *, fc_port_t *, int qla24xx_post_gnl_work(struct scsi_qla_host *, fc_port_t *); int qla24xx_async_abort_cmd(srb_t *); int qla24xx_post_relogin_work(struct scsi_qla_host *vha); +void qla2x00_wait_for_sess_deletion(scsi_qla_host_t *); /* * Global Functions in qla_mid.c source file. diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c index f6f0a759a7c2..2c1aaf9b7a00 100644 --- a/drivers/scsi/qla2xxx/qla_mid.c +++ b/drivers/scsi/qla2xxx/qla_mid.c @@ -153,10 +153,15 @@ qla24xx_disable_vp(scsi_qla_host_t *vha) { unsigned long flags; int ret; + fc_port_t *fcport; ret = qla24xx_control_vp(vha, VCE_COMMAND_DISABLE_VPS_LOGO_ALL); atomic_set(&vha->loop_state, LOOP_DOWN); atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME); + list_for_each_entry(fcport, &vha->vp_fcports, list) + fcport->logout_on_delete = 0; + + qla2x00_mark_all_devices_lost(vha, 0); /* Remove port id from vp target map */ spin_lock_irqsave(&vha->hw->hardware_lock, flags); diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 9f309e572be4..acc27808963c 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -1147,7 +1147,7 @@ static inline int test_fcport_count(scsi_qla_host_t *vha) * qla2x00_wait_for_sess_deletion can only be called from remove_one. * it has dependency on UNLOADING flag to stop device discovery */ -static void +void qla2x00_wait_for_sess_deletion(scsi_qla_host_t *vha) { qla2x00_mark_all_devices_lost(vha, 0); -- cgit v1.2.3 From 45235022da9925b2b070c0139629233173e50089 Mon Sep 17 00:00:00 2001 From: Quinn Tran Date: Wed, 18 Jul 2018 14:29:53 -0700 Subject: scsi: qla2xxx: Fix driver unload by shutting down chip Use chip shutdown at the start of unload to stop all DMA + traffic and bring down the laser. This prevents any link activities from triggering the driver to be re-engaged. Fixes: 4b60c82736d0 ("scsi: qla2xxx: Add fw_started flags to qpair") Cc: #4.16 Signed-off-by: Quinn Tran Signed-off-by: Himanshu Madhani Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_isr.c | 3 +++ drivers/scsi/qla2xxx/qla_mbx.c | 6 ++++++ drivers/scsi/qla2xxx/qla_mid.c | 6 ++++-- drivers/scsi/qla2xxx/qla_os.c | 44 +++++++++++++++++------------------------- drivers/scsi/qla2xxx/qla_sup.c | 3 +++ 5 files changed, 34 insertions(+), 28 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 9fa5a2557f2c..7756106d4555 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -631,6 +631,9 @@ qla2x00_async_event(scsi_qla_host_t *vha, struct rsp_que *rsp, uint16_t *mb) unsigned long flags; fc_port_t *fcport = NULL; + if (!vha->hw->flags.fw_started) + return; + /* Setup to process RIO completion. */ handle_cnt = 0; if (IS_CNA_CAPABLE(ha)) diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 7e875f575229..f0ec13d48bf3 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -4220,6 +4220,9 @@ qla25xx_init_req_que(struct scsi_qla_host *vha, struct req_que *req) mbx_cmd_t *mcp = &mc; struct qla_hw_data *ha = vha->hw; + if (!ha->flags.fw_started) + return QLA_SUCCESS; + ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x10d3, "Entered %s.\n", __func__); @@ -4289,6 +4292,9 @@ qla25xx_init_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp) mbx_cmd_t *mcp = &mc; struct qla_hw_data *ha = vha->hw; + if (!ha->flags.fw_started) + return QLA_SUCCESS; + ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x10d6, "Entered %s.\n", __func__); diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c index 2c1aaf9b7a00..aa727d07b702 100644 --- a/drivers/scsi/qla2xxx/qla_mid.c +++ b/drivers/scsi/qla2xxx/qla_mid.c @@ -152,10 +152,12 @@ int qla24xx_disable_vp(scsi_qla_host_t *vha) { unsigned long flags; - int ret; + int ret = QLA_SUCCESS; fc_port_t *fcport; - ret = qla24xx_control_vp(vha, VCE_COMMAND_DISABLE_VPS_LOGO_ALL); + if (vha->hw->flags.fw_started) + ret = qla24xx_control_vp(vha, VCE_COMMAND_DISABLE_VPS_LOGO_ALL); + atomic_set(&vha->loop_state, LOOP_DOWN); atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME); list_for_each_entry(fcport, &vha->vp_fcports, list) diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index acc27808963c..2cd2e5ccce15 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -303,6 +303,7 @@ static void qla2x00_free_device(scsi_qla_host_t *); static int qla2xxx_map_queues(struct Scsi_Host *shost); static void qla2x00_destroy_deferred_work(struct qla_hw_data *); + struct scsi_host_template qla2xxx_driver_template = { .module = THIS_MODULE, .name = QLA2XXX_DRIVER_NAME, @@ -3603,6 +3604,8 @@ qla2x00_remove_one(struct pci_dev *pdev) base_vha = pci_get_drvdata(pdev); ha = base_vha->hw; + ql_log(ql_log_info, base_vha, 0xb079, + "Removing driver\n"); /* Indicate device removal to prevent future board_disable and wait * until any pending board_disable has completed. */ @@ -3625,6 +3628,21 @@ qla2x00_remove_one(struct pci_dev *pdev) } qla2x00_wait_for_hba_ready(base_vha); + if (IS_QLA25XX(ha) || IS_QLA2031(ha) || IS_QLA27XX(ha)) { + if (ha->flags.fw_started) + qla2x00_abort_isp_cleanup(base_vha); + } else if (!IS_QLAFX00(ha)) { + if (IS_QLA8031(ha)) { + ql_dbg(ql_dbg_p3p, base_vha, 0xb07e, + "Clearing fcoe driver presence.\n"); + if (qla83xx_clear_drv_presence(base_vha) != QLA_SUCCESS) + ql_dbg(ql_dbg_p3p, base_vha, 0xb079, + "Error while clearing DRV-Presence.\n"); + } + + qla2x00_try_to_stop_firmware(base_vha); + } + qla2x00_wait_for_sess_deletion(base_vha); /* @@ -3648,14 +3666,6 @@ qla2x00_remove_one(struct pci_dev *pdev) qla2x00_delete_all_vps(ha, base_vha); - if (IS_QLA8031(ha)) { - ql_dbg(ql_dbg_p3p, base_vha, 0xb07e, - "Clearing fcoe driver presence.\n"); - if (qla83xx_clear_drv_presence(base_vha) != QLA_SUCCESS) - ql_dbg(ql_dbg_p3p, base_vha, 0xb079, - "Error while clearing DRV-Presence.\n"); - } - qla2x00_abort_all_cmds(base_vha, DID_NO_CONNECT << 16); qla2x00_dfs_remove(base_vha); @@ -3715,24 +3725,6 @@ qla2x00_free_device(scsi_qla_host_t *vha) qla2x00_stop_timer(vha); qla25xx_delete_queues(vha); - - if (ha->flags.fce_enabled) - qla2x00_disable_fce_trace(vha, NULL, NULL); - - if (ha->eft) - qla2x00_disable_eft_trace(vha); - - if (IS_QLA25XX(ha) || IS_QLA2031(ha) || IS_QLA27XX(ha)) { - if (ha->flags.fw_started) - qla2x00_abort_isp_cleanup(vha); - } else { - if (ha->flags.fw_started) { - /* Stop currently executing firmware. */ - qla2x00_try_to_stop_firmware(vha); - ha->flags.fw_started = 0; - } - } - vha->flags.online = 0; /* turn-off interrupts on the card */ diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c index 04458eb19d38..4499c787165f 100644 --- a/drivers/scsi/qla2xxx/qla_sup.c +++ b/drivers/scsi/qla2xxx/qla_sup.c @@ -1880,6 +1880,9 @@ qla24xx_beacon_off(struct scsi_qla_host *vha) if (IS_P3P_TYPE(ha)) return QLA_SUCCESS; + if (!ha->flags.fw_started) + return QLA_SUCCESS; + ha->beacon_blink_led = 0; if (IS_QLA2031(ha) || IS_QLA27XX(ha)) -- cgit v1.2.3 From b08abbd9f5996309f021684f9ca74da30dcca36a Mon Sep 17 00:00:00 2001 From: Quinn Tran Date: Wed, 18 Jul 2018 14:29:54 -0700 Subject: scsi: qla2xxx: Fix ISP recovery on unload During unload process, the chip can encounter problem where a FW dump would be captured. For this case, the full reset sequence will be skip to bring the chip back to full operational state. Fixes: e315cd28b9ef ("[SCSI] qla2xxx: Code changes for qla data structure refactoring") Cc: Signed-off-by: Quinn Tran Signed-off-by: Himanshu Madhani Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_os.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 2cd2e5ccce15..1fbd16c8c9a7 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -6020,8 +6020,9 @@ qla2x00_do_dpc(void *data) set_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags); } - if (test_and_clear_bit(ISP_ABORT_NEEDED, - &base_vha->dpc_flags)) { + if (test_and_clear_bit + (ISP_ABORT_NEEDED, &base_vha->dpc_flags) && + !test_bit(UNLOADING, &base_vha->dpc_flags)) { ql_dbg(ql_dbg_dpc, base_vha, 0x4007, "ISP abort scheduled.\n"); -- cgit v1.2.3 From b4146c4929ef61d5afca011474d59d0918a0cd82 Mon Sep 17 00:00:00 2001 From: Anil Gurumurthy Date: Wed, 18 Jul 2018 14:29:55 -0700 Subject: scsi: qla2xxx: Return error when TMF returns Propagate the task management completion status properly to avoid unnecessary waits for commands to complete. Fixes: faef62d13463 ("[SCSI] qla2xxx: Fix Task Management command asynchronous handling") Cc: Signed-off-by: Anil Gurumurthy Signed-off-by: Himanshu Madhani Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_init.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index db0e3279e07a..1b19b954bbae 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -1489,11 +1489,10 @@ qla2x00_async_tm_cmd(fc_port_t *fcport, uint32_t flags, uint32_t lun, wait_for_completion(&tm_iocb->u.tmf.comp); - rval = tm_iocb->u.tmf.comp_status == CS_COMPLETE ? - QLA_SUCCESS : QLA_FUNCTION_FAILED; + rval = tm_iocb->u.tmf.data; - if ((rval != QLA_SUCCESS) || tm_iocb->u.tmf.data) { - ql_dbg(ql_dbg_taskm, vha, 0x8030, + if (rval != QLA_SUCCESS) { + ql_log(ql_log_warn, vha, 0x8030, "TM IOCB failed (%x).\n", rval); } -- cgit v1.2.3 From e01a06c8089132bb4da035c6a83df23916ca3ebf Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Thu, 19 Jul 2018 21:38:23 +0200 Subject: ARM: dts: imx6: RDU2: fix irq type for mv88e6xxx switch MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The Marvell switches report their interrupts in a level sensitive way. When using edge sensitive detection a race condition in the interrupt handler of the swich might result in the OS to miss all future events which might make the switch non-functional. The problem is that both mv88e6xxx_g2_irq_thread_fn() and mv88e6xxx_g1_irq_thread_work() sample the irq cause register (MV88E6XXX_G2_INT_SRC and MV88E6XXX_G1_STS respectively) once and then handle the observed sources. If after sampling but before all observed irq sources are handled a new irq source gets active this is not noticed by the handler which returns unsuspecting, but the interrupt line stays active which prevents the edge detector to kick in. All device trees but imx6qdl-zii-rdu2 get this right (most of them by not specifying an interrupt parent). So fix imx6qdl-zii-rdu2 accordingly. Signed-off-by: Uwe Kleine-König Fixes: f64992d1a916 ("ARM: dts: imx6: RDU2: Add Switch interrupts") Reviewed-by: Andrew Lunn Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi index 19a075aee19e..f14df0baf2ab 100644 --- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi @@ -692,7 +692,7 @@ dsa,member = <0 0>; eeprom-length = <512>; interrupt-parent = <&gpio6>; - interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <2>; -- cgit v1.2.3 From 46d8c4b28652d35dc6cfb5adf7f54e102fc04384 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Fri, 13 Jul 2018 16:12:32 +0800 Subject: crypto: padlock-aes - Fix Nano workaround data corruption This was detected by the self-test thanks to Ard's chunking patch. I finally got around to testing this out on my ancient Via box. It turns out that the workaround got the assembly wrong and we end up doing count + initial cycles of the loop instead of just count. This obviously causes corruption, either by overwriting the source that is yet to be processed, or writing over the end of the buffer. On CPUs that don't require the workaround only ECB is affected. On Nano CPUs both ECB and CBC are affected. This patch fixes it by doing the subtraction prior to the assembly. Fixes: a76c1c23d0c3 ("crypto: padlock-aes - work around Nano CPU...") Cc: Reported-by: Jamie Heilman Signed-off-by: Herbert Xu --- drivers/crypto/padlock-aes.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/crypto/padlock-aes.c b/drivers/crypto/padlock-aes.c index 1c6cbda56afe..09d823d36d3a 100644 --- a/drivers/crypto/padlock-aes.c +++ b/drivers/crypto/padlock-aes.c @@ -266,6 +266,8 @@ static inline void padlock_xcrypt_ecb(const u8 *input, u8 *output, void *key, return; } + count -= initial; + if (initial) asm volatile (".byte 0xf3,0x0f,0xa7,0xc8" /* rep xcryptecb */ : "+S"(input), "+D"(output) @@ -273,7 +275,7 @@ static inline void padlock_xcrypt_ecb(const u8 *input, u8 *output, void *key, asm volatile (".byte 0xf3,0x0f,0xa7,0xc8" /* rep xcryptecb */ : "+S"(input), "+D"(output) - : "d"(control_word), "b"(key), "c"(count - initial)); + : "d"(control_word), "b"(key), "c"(count)); } static inline u8 *padlock_xcrypt_cbc(const u8 *input, u8 *output, void *key, @@ -284,6 +286,8 @@ static inline u8 *padlock_xcrypt_cbc(const u8 *input, u8 *output, void *key, if (count < cbc_fetch_blocks) return cbc_crypt(input, output, key, iv, control_word, count); + count -= initial; + if (initial) asm volatile (".byte 0xf3,0x0f,0xa7,0xd0" /* rep xcryptcbc */ : "+S" (input), "+D" (output), "+a" (iv) @@ -291,7 +295,7 @@ static inline u8 *padlock_xcrypt_cbc(const u8 *input, u8 *output, void *key, asm volatile (".byte 0xf3,0x0f,0xa7,0xd0" /* rep xcryptcbc */ : "+S" (input), "+D" (output), "+a" (iv) - : "d" (control_word), "b" (key), "c" (count-initial)); + : "d" (control_word), "b" (key), "c" (count)); return iv; } -- cgit v1.2.3 From 4905bd9a42271bbf7dbef06b5e1edb18f33ac27c Mon Sep 17 00:00:00 2001 From: Tariq Toukan Date: Tue, 17 Jul 2018 18:10:37 +0300 Subject: net/page_pool: Fix inconsistent lock state warning Fix the warning below by calling the ptr_ring_consume_bh, which uses spin_[un]lock_bh. [ 179.064300] ================================ [ 179.069073] WARNING: inconsistent lock state [ 179.073846] 4.18.0-rc2+ #18 Not tainted [ 179.078133] -------------------------------- [ 179.082907] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 179.089637] swapper/21/0 [HC0[0]:SC1[1]:HE1:SE0] takes: [ 179.095478] 00000000963d1995 (&(&r->consumer_lock)->rlock){+.?.}, at: __page_pool_empty_ring+0x61/0x100 [ 179.105988] {SOFTIRQ-ON-W} state was registered at: [ 179.111443] _raw_spin_lock+0x35/0x50 [ 179.115634] __page_pool_empty_ring+0x61/0x100 [ 179.120699] page_pool_destroy+0x32/0x50 [ 179.125204] mlx5e_free_rq+0x38/0xc0 [mlx5_core] [ 179.130471] mlx5e_close_channel+0x20/0x120 [mlx5_core] [ 179.136418] mlx5e_close_channels+0x26/0x40 [mlx5_core] [ 179.142364] mlx5e_close_locked+0x44/0x50 [mlx5_core] [ 179.148509] mlx5e_close+0x42/0x60 [mlx5_core] [ 179.153936] __dev_close_many+0xb1/0x120 [ 179.158749] dev_close_many+0xa2/0x170 [ 179.163364] rollback_registered_many+0x148/0x460 [ 179.169047] rollback_registered+0x56/0x90 [ 179.174043] unregister_netdevice_queue+0x7e/0x100 [ 179.179816] unregister_netdev+0x18/0x20 [ 179.184623] mlx5e_remove+0x2a/0x50 [mlx5_core] [ 179.190107] mlx5_remove_device+0xe5/0x110 [mlx5_core] [ 179.196274] mlx5_unregister_interface+0x39/0x90 [mlx5_core] [ 179.203028] cleanup+0x5/0xbfc [mlx5_core] [ 179.208031] __x64_sys_delete_module+0x16b/0x240 [ 179.213640] do_syscall_64+0x5a/0x210 [ 179.218151] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 179.224218] irq event stamp: 334398 [ 179.228438] hardirqs last enabled at (334398): [] rcu_process_callbacks+0x1c7/0x790 [ 179.239178] hardirqs last disabled at (334397): [] rcu_process_callbacks+0x182/0x790 [ 179.249931] softirqs last enabled at (334386): [] irq_enter+0x5e/0x70 [ 179.259306] softirqs last disabled at (334387): [] irq_exit+0xdc/0xf0 [ 179.268584] [ 179.268584] other info that might help us debug this: [ 179.276572] Possible unsafe locking scenario: [ 179.276572] [ 179.283877] CPU0 [ 179.286954] ---- [ 179.290033] lock(&(&r->consumer_lock)->rlock); [ 179.295546] [ 179.298830] lock(&(&r->consumer_lock)->rlock); [ 179.304550] [ 179.304550] *** DEADLOCK *** Fixes: ff7d6b27f894 ("page_pool: refurbish version of page_pool code") Signed-off-by: Tariq Toukan Cc: Jesper Dangaard Brouer Signed-off-by: David S. Miller --- net/core/page_pool.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/core/page_pool.c b/net/core/page_pool.c index 68bf07206744..43a932cb609b 100644 --- a/net/core/page_pool.c +++ b/net/core/page_pool.c @@ -269,7 +269,7 @@ static void __page_pool_empty_ring(struct page_pool *pool) struct page *page; /* Empty recycle ring */ - while ((page = ptr_ring_consume(&pool->ring))) { + while ((page = ptr_ring_consume_bh(&pool->ring))) { /* Verify the refcnt invariant of cached pages */ if (!(page_ref_count(page) == 1)) pr_crit("%s() page_pool refcnt %d violation\n", -- cgit v1.2.3 From f7482683f1f4925c60941dbbd0813ceaa069d106 Mon Sep 17 00:00:00 2001 From: Zhao Chen Date: Wed, 18 Jul 2018 00:33:18 -0400 Subject: net-next/hinic: fix a problem in hinic_xmit_frame() The calculation of "wqe_size" is not correct when the tx queue is busy in hinic_xmit_frame(). When there are no free WQEs, the tx flow will unmap the skb buffer, then ring the doobell for the pending packets. But the "wqe_size" which used to calculate the doorbell address is not correct. The wqe size should be cleared to 0, otherwise, it will cause a doorbell error. This patch fixes the problem. Reported-by: Zhou Wang Signed-off-by: Zhao Chen Signed-off-by: David S. Miller --- drivers/net/ethernet/huawei/hinic/hinic_tx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/huawei/hinic/hinic_tx.c b/drivers/net/ethernet/huawei/hinic/hinic_tx.c index 9128858479c4..2353ec829c04 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_tx.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_tx.c @@ -229,6 +229,7 @@ netdev_tx_t hinic_xmit_frame(struct sk_buff *skb, struct net_device *netdev) txq->txq_stats.tx_busy++; u64_stats_update_end(&txq->txq_stats.syncp); err = NETDEV_TX_BUSY; + wqe_size = 0; goto flush_skbs; } -- cgit v1.2.3 From 759b94a00a207ef605f3fd6f6e99570799688145 Mon Sep 17 00:00:00 2001 From: Taeung Song Date: Thu, 19 Jul 2018 21:10:05 +0900 Subject: tools/bpftool: Fix segfault case regarding 'pin' arguments Arguments of 'pin' subcommand should be checked at the very beginning of do_pin_any(). Otherwise segfault errors can occur when using 'map pin' or 'prog pin' commands, so fix it. # bpftool prog pin id Segmentation fault Fixes: 71bb428fe2c1 ("tools: bpf: add bpftool") Reviewed-by: Jakub Kicinski Reported-by: Taehee Yoo Signed-off-by: Taeung Song Signed-off-by: Daniel Borkmann --- tools/bpf/bpftool/common.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/tools/bpf/bpftool/common.c b/tools/bpf/bpftool/common.c index 32f9e397a6c0..3f140eff039f 100644 --- a/tools/bpf/bpftool/common.c +++ b/tools/bpf/bpftool/common.c @@ -217,6 +217,14 @@ int do_pin_any(int argc, char **argv, int (*get_fd_by_id)(__u32)) int err; int fd; + if (argc < 3) { + p_err("too few arguments, id ID and FILE path is required"); + return -1; + } else if (argc > 3) { + p_err("too many arguments"); + return -1; + } + if (!is_prefix(*argv, "id")) { p_err("expected 'id' got %s", *argv); return -1; @@ -230,9 +238,6 @@ int do_pin_any(int argc, char **argv, int (*get_fd_by_id)(__u32)) } NEXT_ARG(); - if (argc != 1) - usage(); - fd = get_fd_by_id(id); if (fd < 0) { p_err("can't get prog by id (%u): %s", id, strerror(errno)); -- cgit v1.2.3 From 36fc3c8c282c01ad1570bd864de52f128d731b75 Mon Sep 17 00:00:00 2001 From: Martin KaFai Lau Date: Thu, 19 Jul 2018 22:14:31 -0700 Subject: bpf: btf: Clean up BTF_INT_BITS() in uapi btf.h This patch shrinks the BTF_INT_BITS() mask. The current btf_int_check_meta() ensures the nr_bits of an integer cannot exceed 64. Hence, it is mostly an uapi cleanup. The actual btf usage (i.e. seq_show()) is also modified to use u8 instead of u16. The verification (e.g. btf_int_check_meta()) path stays as is to deal with invalid BTF situation. Fixes: 69b693f0aefa ("bpf: btf: Introduce BPF Type Format (BTF)") Signed-off-by: Martin KaFai Lau Signed-off-by: Daniel Borkmann --- include/uapi/linux/btf.h | 2 +- kernel/bpf/btf.c | 16 ++++++++++------ 2 files changed, 11 insertions(+), 7 deletions(-) diff --git a/include/uapi/linux/btf.h b/include/uapi/linux/btf.h index 0b5ddbe135a4..972265f32871 100644 --- a/include/uapi/linux/btf.h +++ b/include/uapi/linux/btf.h @@ -76,7 +76,7 @@ struct btf_type { */ #define BTF_INT_ENCODING(VAL) (((VAL) & 0x0f000000) >> 24) #define BTF_INT_OFFSET(VAL) (((VAL & 0x00ff0000)) >> 16) -#define BTF_INT_BITS(VAL) ((VAL) & 0x0000ffff) +#define BTF_INT_BITS(VAL) ((VAL) & 0x000000ff) /* Attributes stored in the BTF_INT_ENCODING */ #define BTF_INT_SIGNED (1 << 0) diff --git a/kernel/bpf/btf.c b/kernel/bpf/btf.c index e016ac3afa24..9704934252b3 100644 --- a/kernel/bpf/btf.c +++ b/kernel/bpf/btf.c @@ -450,7 +450,7 @@ static const struct btf_type *btf_type_by_id(const struct btf *btf, u32 type_id) */ static bool btf_type_int_is_regular(const struct btf_type *t) { - u16 nr_bits, nr_bytes; + u8 nr_bits, nr_bytes; u32 int_data; int_data = btf_type_int(t); @@ -993,12 +993,16 @@ static void btf_int_bits_seq_show(const struct btf *btf, { u16 left_shift_bits, right_shift_bits; u32 int_data = btf_type_int(t); - u16 nr_bits = BTF_INT_BITS(int_data); - u16 total_bits_offset; - u16 nr_copy_bytes; - u16 nr_copy_bits; + u8 nr_bits = BTF_INT_BITS(int_data); + u8 total_bits_offset; + u8 nr_copy_bytes; + u8 nr_copy_bits; u64 print_num; + /* + * bits_offset is at most 7. + * BTF_INT_OFFSET() cannot exceed 64 bits. + */ total_bits_offset = bits_offset + BTF_INT_OFFSET(int_data); data += BITS_ROUNDDOWN_BYTES(total_bits_offset); bits_offset = BITS_PER_BYTE_MASKED(total_bits_offset); @@ -1028,7 +1032,7 @@ static void btf_int_seq_show(const struct btf *btf, const struct btf_type *t, u32 int_data = btf_type_int(t); u8 encoding = BTF_INT_ENCODING(int_data); bool sign = encoding & BTF_INT_SIGNED; - u32 nr_bits = BTF_INT_BITS(int_data); + u8 nr_bits = BTF_INT_BITS(int_data); if (bits_offset || BTF_INT_OFFSET(int_data) || BITS_PER_BYTE_MASKED(nr_bits)) { -- cgit v1.2.3 From 7c3e8b642bad6669e0023d3d6dedd87b2527a2c8 Mon Sep 17 00:00:00 2001 From: Martin KaFai Lau Date: Thu, 19 Jul 2018 22:34:10 -0700 Subject: bpf: Use option "help" in the llvm-objcopy test I noticed the "--version" option of the llvm-objcopy command has recently disappeared from the master llvm branch. It is currently used as a BTF support test in tools/testing/selftests/bpf/Makefile. This patch replaces it with "--help" which should be less error prone in the future. Fixes: c0fa1b6c3efc ("bpf: btf: Add BTF tests") Signed-off-by: Martin KaFai Lau Signed-off-by: Daniel Borkmann --- tools/testing/selftests/bpf/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile index 7a6214e9ae58..a362e3d7abc6 100644 --- a/tools/testing/selftests/bpf/Makefile +++ b/tools/testing/selftests/bpf/Makefile @@ -105,7 +105,7 @@ $(OUTPUT)/test_xdp_noinline.o: CLANG_FLAGS += -fno-inline BTF_LLC_PROBE := $(shell $(LLC) -march=bpf -mattr=help 2>&1 | grep dwarfris) BTF_PAHOLE_PROBE := $(shell $(BTF_PAHOLE) --help 2>&1 | grep BTF) -BTF_OBJCOPY_PROBE := $(shell $(LLVM_OBJCOPY) --version 2>&1 | grep LLVM) +BTF_OBJCOPY_PROBE := $(shell $(LLVM_OBJCOPY) --help 2>&1 | grep -i 'usage.*llvm') ifneq ($(BTF_LLC_PROBE),) ifneq ($(BTF_PAHOLE_PROBE),) -- cgit v1.2.3 From 2db1581e1f432ac6b4efe152c57fdfb4de85c154 Mon Sep 17 00:00:00 2001 From: Lu Baolu Date: Sun, 8 Jul 2018 14:23:21 +0800 Subject: Revert "iommu/vt-d: Clean up pasid quirk for pre-production devices" This reverts commit ab96746aaa344fb720a198245a837e266fad3b62. The commit ab96746aaa34 ("iommu/vt-d: Clean up pasid quirk for pre-production devices") triggers ECS mode on some platforms which have broken ECS support. As the result, graphic device will be inoperable on boot. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107017 Cc: Ashok Raj Signed-off-by: Lu Baolu Signed-off-by: Joerg Roedel --- drivers/iommu/intel-iommu.c | 32 ++++++++++++++++++++++++++++++-- include/linux/intel-iommu.h | 1 + 2 files changed, 31 insertions(+), 2 deletions(-) diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c index b344a883f116..115ff26e9ced 100644 --- a/drivers/iommu/intel-iommu.c +++ b/drivers/iommu/intel-iommu.c @@ -484,14 +484,37 @@ static int dmar_forcedac; static int intel_iommu_strict; static int intel_iommu_superpage = 1; static int intel_iommu_ecs = 1; +static int intel_iommu_pasid28; static int iommu_identity_mapping; #define IDENTMAP_ALL 1 #define IDENTMAP_GFX 2 #define IDENTMAP_AZALIA 4 -#define ecs_enabled(iommu) (intel_iommu_ecs && ecap_ecs(iommu->ecap)) -#define pasid_enabled(iommu) (ecs_enabled(iommu) && ecap_pasid(iommu->ecap)) +/* Broadwell and Skylake have broken ECS support — normal so-called "second + * level" translation of DMA requests-without-PASID doesn't actually happen + * unless you also set the NESTE bit in an extended context-entry. Which of + * course means that SVM doesn't work because it's trying to do nested + * translation of the physical addresses it finds in the process page tables, + * through the IOVA->phys mapping found in the "second level" page tables. + * + * The VT-d specification was retroactively changed to change the definition + * of the capability bits and pretend that Broadwell/Skylake never happened... + * but unfortunately the wrong bit was changed. It's ECS which is broken, but + * for some reason it was the PASID capability bit which was redefined (from + * bit 28 on BDW/SKL to bit 40 in future). + * + * So our test for ECS needs to eschew those implementations which set the old + * PASID capabiity bit 28, since those are the ones on which ECS is broken. + * Unless we are working around the 'pasid28' limitations, that is, by putting + * the device into passthrough mode for normal DMA and thus masking the bug. + */ +#define ecs_enabled(iommu) (intel_iommu_ecs && ecap_ecs(iommu->ecap) && \ + (intel_iommu_pasid28 || !ecap_broken_pasid(iommu->ecap))) +/* PASID support is thus enabled if ECS is enabled and *either* of the old + * or new capability bits are set. */ +#define pasid_enabled(iommu) (ecs_enabled(iommu) && \ + (ecap_pasid(iommu->ecap) || ecap_broken_pasid(iommu->ecap))) int intel_iommu_gfx_mapped; EXPORT_SYMBOL_GPL(intel_iommu_gfx_mapped); @@ -554,6 +577,11 @@ static int __init intel_iommu_setup(char *str) printk(KERN_INFO "Intel-IOMMU: disable extended context table support\n"); intel_iommu_ecs = 0; + } else if (!strncmp(str, "pasid28", 7)) { + printk(KERN_INFO + "Intel-IOMMU: enable pre-production PASID support\n"); + intel_iommu_pasid28 = 1; + iommu_identity_mapping |= IDENTMAP_GFX; } else if (!strncmp(str, "tboot_noforce", 13)) { printk(KERN_INFO "Intel-IOMMU: not forcing on after tboot. This could expose security risk for tboot\n"); diff --git a/include/linux/intel-iommu.h b/include/linux/intel-iommu.h index 1df940196ab2..ef169d67df92 100644 --- a/include/linux/intel-iommu.h +++ b/include/linux/intel-iommu.h @@ -121,6 +121,7 @@ #define ecap_srs(e) ((e >> 31) & 0x1) #define ecap_ers(e) ((e >> 30) & 0x1) #define ecap_prs(e) ((e >> 29) & 0x1) +#define ecap_broken_pasid(e) ((e >> 28) & 0x1) #define ecap_dis(e) ((e >> 27) & 0x1) #define ecap_nest(e) ((e >> 26) & 0x1) #define ecap_mts(e) ((e >> 25) & 0x1) -- cgit v1.2.3 From 486c16f2b5d1eb12339fb7a020961ea1c40e619f Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Fri, 20 Jul 2018 09:53:02 +0200 Subject: ASoC: sgtl5000: fix spelling in devicetree binding document This fixes a spelling mistake. Signed-off-by: Marcel Ziswiler Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/sgtl5000.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/sound/sgtl5000.txt b/Documentation/devicetree/bindings/sound/sgtl5000.txt index 0f214457476f..9c58f724396a 100644 --- a/Documentation/devicetree/bindings/sound/sgtl5000.txt +++ b/Documentation/devicetree/bindings/sound/sgtl5000.txt @@ -17,7 +17,7 @@ Optional properties: - VDDD-supply : the regulator provider of VDDD -- micbias-resistor-k-ohms : the bias resistor to be used in kOmhs +- micbias-resistor-k-ohms : the bias resistor to be used in kOhms The resistor can take values of 2k, 4k or 8k. If set to 0 it will be off. If this node is not mentioned or if the value is unknown, then -- cgit v1.2.3 From e1548b1ba1643d4b5015f7168c64f240ebe114c8 Mon Sep 17 00:00:00 2001 From: Arnaud Pouliquen Date: Fri, 20 Jul 2018 10:02:50 +0200 Subject: MAINTAINERS: add entry for STI audio drivers Add sound/soc/sti drivers entry for STI audio drivers from ST Microelectronics. Signed-off-by: Arnaud Pouliquen Signed-off-by: Mark Brown --- MAINTAINERS | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 9d5eeff51b5f..b44d7167a9e9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -13557,6 +13557,13 @@ L: linux-block@vger.kernel.org S: Maintained F: drivers/block/skd*[ch] +STI AUDIO (ASoC) DRIVERS +M: Arnaud Pouliquen +L: alsa-devel@alsa-project.org (moderated for non-subscribers) +S: Maintained +F: Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt +F: sound/soc/sti/ + STI CEC DRIVER M: Benjamin Gaignard S: Maintained -- cgit v1.2.3 From faa80b66c767ef4995e33835e9844a5df142c6cc Mon Sep 17 00:00:00 2001 From: Arnaud Pouliquen Date: Fri, 20 Jul 2018 10:02:51 +0200 Subject: MAINTAINERS: add entry for STM32 audio drivers Add sound/soc/stm drivers entry for STM32 audio drivers from ST Microelectronics. Signed-off-by: Arnaud Pouliquen Signed-off-by: Mark Brown --- MAINTAINERS | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index b44d7167a9e9..fc711d23dc83 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -13577,6 +13577,14 @@ T: git git://linuxtv.org/media_tree.git S: Maintained F: drivers/media/usb/stk1160/ +STM32 AUDIO (ASoC) DRIVERS +M: Olivier Moysan +M: Arnaud Pouliquen +L: alsa-devel@alsa-project.org (moderated for non-subscribers) +S: Maintained +F: Documentation/devicetree/bindings/sound/st,stm32-*.txt +F: sound/soc/stm/ + STM32 TIMER/LPTIMER DRIVERS M: Fabrice Gasnier S: Maintained -- cgit v1.2.3 From 2ec42486358f63c4a426514c395d13f4b9de5da8 Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Fri, 20 Jul 2018 10:04:23 +0200 Subject: ASoC: tegra: improve goto error label While the two error labels "err" and "err_clk_put" goto the same place it is rather confusing that the earlier one is certainly used later again. Signed-off-by: Marcel Ziswiler Signed-off-by: Mark Brown --- sound/soc/tegra/tegra20_ac97.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/tegra/tegra20_ac97.c b/sound/soc/tegra/tegra20_ac97.c index affad46bf188..682ef33afb5f 100644 --- a/sound/soc/tegra/tegra20_ac97.c +++ b/sound/soc/tegra/tegra20_ac97.c @@ -377,7 +377,7 @@ static int tegra20_ac97_platform_probe(struct platform_device *pdev) ret = clk_prepare_enable(ac97->clk_ac97); if (ret) { dev_err(&pdev->dev, "clk_enable failed: %d\n", ret); - goto err; + goto err_clk_put; } ret = snd_soc_set_ac97_ops(&tegra20_ac97_ops); -- cgit v1.2.3 From 2502e5a025935b7b476b69eda4959b3c4022c72b Mon Sep 17 00:00:00 2001 From: Damien Thébault Date: Wed, 18 Jul 2018 12:06:01 +0200 Subject: platform/x86: dell-laptop: Fix backlight detection MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix return code check for "max brightness" ACPI call. The Dell laptop ACPI video brightness control is not present on dell laptops anymore, but was present in older kernel versions. The code that checks the return value is incorrect since the SMM refactoring. The old code was: if (buffer->output[0] == 0) Which was changed to: ret = dell_send_request(...) if (ret) However, dell_send_request() will return 0 if buffer->output[0] == 0, so we must change the check to: if (ret == 0) This issue was found on a Dell M4800 laptop, and the fix tested on it as well. Fixes: 549b4930f057 ("dell-smbios: Introduce dispatcher for SMM calls") Signed-off-by: Damien Thébault Tested-by: Damien Thébault Reviewed-by: Pali Rohár Reviewed-by: Mario Limonciello Signed-off-by: Andy Shevchenko --- drivers/platform/x86/dell-laptop.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c index f1fa8612db40..06978c14c83b 100644 --- a/drivers/platform/x86/dell-laptop.c +++ b/drivers/platform/x86/dell-laptop.c @@ -2185,7 +2185,7 @@ static int __init dell_init(void) dell_fill_request(&buffer, token->location, 0, 0, 0); ret = dell_send_request(&buffer, CLASS_TOKEN_READ, SELECT_TOKEN_AC); - if (ret) + if (ret == 0) max_intensity = buffer.output[3]; } -- cgit v1.2.3 From b8088dda98b9064a2b3007fe54b03ede70a15602 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Tue, 17 Jul 2018 07:17:53 +0200 Subject: netfilter: nf_tables: use dev->name directly no need to store the name in separate area. Furthermore, it uses kmalloc but not kfree and most accesses seem to treat it as char[IFNAMSIZ] not char *. Remove this and use dev->name instead. In case event zeroed dev, just omit the name in the dump. Fixes: d92191aa84e5f1 ("netfilter: nf_tables: cache device name in flowtable object") Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- include/net/netfilter/nf_tables.h | 1 - net/netfilter/nf_tables_api.c | 14 +++++--------- 2 files changed, 5 insertions(+), 10 deletions(-) diff --git a/include/net/netfilter/nf_tables.h b/include/net/netfilter/nf_tables.h index 4e82a4c49912..dc417ef0a0c5 100644 --- a/include/net/netfilter/nf_tables.h +++ b/include/net/netfilter/nf_tables.h @@ -1124,7 +1124,6 @@ struct nft_flowtable { u32 genmask:2, use:30; u64 handle; - char *dev_name[NFT_FLOWTABLE_DEVICE_MAX]; /* runtime data below here */ struct nf_hook_ops *ops ____cacheline_aligned; struct nf_flowtable data; diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index d41fa2c82f14..54a4f75ff9da 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -5324,8 +5324,6 @@ static int nf_tables_flowtable_parse_hook(const struct nft_ctx *ctx, flowtable->ops[i].priv = &flowtable->data; flowtable->ops[i].hook = flowtable->data.type->hook; flowtable->ops[i].dev = dev_array[i]; - flowtable->dev_name[i] = kstrdup(dev_array[i]->name, - GFP_KERNEL); } return err; @@ -5483,10 +5481,8 @@ static int nf_tables_newflowtable(struct net *net, struct sock *nlsk, err6: i = flowtable->ops_len; err5: - for (k = i - 1; k >= 0; k--) { - kfree(flowtable->dev_name[k]); + for (k = i - 1; k >= 0; k--) nf_unregister_net_hook(net, &flowtable->ops[k]); - } kfree(flowtable->ops); err4: @@ -5585,9 +5581,10 @@ static int nf_tables_fill_flowtable_info(struct sk_buff *skb, struct net *net, goto nla_put_failure; for (i = 0; i < flowtable->ops_len; i++) { - if (flowtable->dev_name[i][0] && - nla_put_string(skb, NFTA_DEVICE_NAME, - flowtable->dev_name[i])) + const struct net_device *dev = READ_ONCE(flowtable->ops[i].dev); + + if (dev && + nla_put_string(skb, NFTA_DEVICE_NAME, dev->name)) goto nla_put_failure; } nla_nest_end(skb, nest_devs); @@ -5829,7 +5826,6 @@ static void nft_flowtable_event(unsigned long event, struct net_device *dev, continue; nf_unregister_net_hook(dev_net(dev), &flowtable->ops[i]); - flowtable->dev_name[i][0] = '\0'; flowtable->ops[i].dev = NULL; break; } -- cgit v1.2.3 From a12486ebe104190a6c10557134014290afa98370 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Tue, 17 Jul 2018 07:17:54 +0200 Subject: netfilter: nf_tables: free flow table struct too Fixes: 3b49e2e94e6ebb ("netfilter: nf_tables: add flow table netlink frontend") Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_tables_api.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 54a4f75ff9da..200da08524ae 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -5784,6 +5784,7 @@ static void nf_tables_flowtable_destroy(struct nft_flowtable *flowtable) kfree(flowtable->name); flowtable->data.type->free(&flowtable->data); module_put(flowtable->data.type->owner); + kfree(flowtable); } static int nf_tables_fill_gen_info(struct sk_buff *skb, struct net *net, -- cgit v1.2.3 From 9f8aac0be21ed5f99bd5ba0ff315d710737d1794 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Tue, 17 Jul 2018 07:17:55 +0200 Subject: netfilter: nf_tables: fix memory leaks on chain rename The new name is stored in the transaction metadata, on commit, the pointers to the old and new names are swapped. Therefore in abort and commit case we have to free the pointer in the chain_trans container. In commit case, the pointer can be used by another cpu that is currently dumping the renamed chain, thus kfree needs to happen after waiting for rcu readers to complete. Fixes: b7263e071a ("netfilter: nf_tables: Allow chain name of up to 255 chars") Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_tables_api.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 200da08524ae..91230d713190 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -6087,6 +6087,9 @@ static void nft_commit_release(struct nft_trans *trans) case NFT_MSG_DELTABLE: nf_tables_table_destroy(&trans->ctx); break; + case NFT_MSG_NEWCHAIN: + kfree(nft_trans_chain_name(trans)); + break; case NFT_MSG_DELCHAIN: nf_tables_chain_destroy(&trans->ctx); break; @@ -6316,13 +6319,15 @@ static int nf_tables_commit(struct net *net, struct sk_buff *skb) nf_tables_table_notify(&trans->ctx, NFT_MSG_DELTABLE); break; case NFT_MSG_NEWCHAIN: - if (nft_trans_chain_update(trans)) + if (nft_trans_chain_update(trans)) { nft_chain_commit_update(trans); - else + nf_tables_chain_notify(&trans->ctx, NFT_MSG_NEWCHAIN); + /* trans destroyed after rcu grace period */ + } else { nft_clear(net, trans->ctx.chain); - - nf_tables_chain_notify(&trans->ctx, NFT_MSG_NEWCHAIN); - nft_trans_destroy(trans); + nf_tables_chain_notify(&trans->ctx, NFT_MSG_NEWCHAIN); + nft_trans_destroy(trans); + } break; case NFT_MSG_DELCHAIN: nft_chain_del(trans->ctx.chain); @@ -6472,7 +6477,7 @@ static int __nf_tables_abort(struct net *net) case NFT_MSG_NEWCHAIN: if (nft_trans_chain_update(trans)) { free_percpu(nft_trans_chain_stats(trans)); - + kfree(nft_trans_chain_name(trans)); nft_trans_destroy(trans); } else { trans->ctx.table->use--; -- cgit v1.2.3 From c6cc94df65c3174be92afbee638f11cbb5e606a7 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Tue, 17 Jul 2018 07:17:56 +0200 Subject: netfilter: nf_tables: don't allow to rename to already-pending name Its possible to rename two chains to the same name in one transaction: nft add chain t c1 nft add chain t c2 nft 'rename chain t c1 c3;rename chain t c2 c3' This creates two chains named 'c3'. Appears to be harmless, both chains can still be deleted both by name or handle, but, nevertheless, its a bug. Walk transaction log and also compare vs. the pending renames. Both chains can still be deleted, but nevertheless it is a bug as we don't allow to create chains with identical names, so we should prevent this from happening-by-rename too. Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_tables_api.c | 42 +++++++++++++++++++++++++++++------------- 1 file changed, 29 insertions(+), 13 deletions(-) diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 91230d713190..d7b9748e338e 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -1598,7 +1598,6 @@ static int nf_tables_updchain(struct nft_ctx *ctx, u8 genmask, u8 policy, struct nft_base_chain *basechain; struct nft_stats *stats = NULL; struct nft_chain_hook hook; - const struct nlattr *name; struct nf_hook_ops *ops; struct nft_trans *trans; int err; @@ -1646,12 +1645,11 @@ static int nf_tables_updchain(struct nft_ctx *ctx, u8 genmask, u8 policy, return PTR_ERR(stats); } + err = -ENOMEM; trans = nft_trans_alloc(ctx, NFT_MSG_NEWCHAIN, sizeof(struct nft_trans_chain)); - if (trans == NULL) { - free_percpu(stats); - return -ENOMEM; - } + if (trans == NULL) + goto err; nft_trans_chain_stats(trans) = stats; nft_trans_chain_update(trans) = true; @@ -1661,19 +1659,37 @@ static int nf_tables_updchain(struct nft_ctx *ctx, u8 genmask, u8 policy, else nft_trans_chain_policy(trans) = -1; - name = nla[NFTA_CHAIN_NAME]; - if (nla[NFTA_CHAIN_HANDLE] && name) { - nft_trans_chain_name(trans) = - nla_strdup(name, GFP_KERNEL); - if (!nft_trans_chain_name(trans)) { - kfree(trans); - free_percpu(stats); - return -ENOMEM; + if (nla[NFTA_CHAIN_HANDLE] && + nla[NFTA_CHAIN_NAME]) { + struct nft_trans *tmp; + char *name; + + err = -ENOMEM; + name = nla_strdup(nla[NFTA_CHAIN_NAME], GFP_KERNEL); + if (!name) + goto err; + + err = -EEXIST; + list_for_each_entry(tmp, &ctx->net->nft.commit_list, list) { + if (tmp->msg_type == NFT_MSG_NEWCHAIN && + tmp->ctx.table == table && + nft_trans_chain_update(tmp) && + nft_trans_chain_name(tmp) && + strcmp(name, nft_trans_chain_name(tmp)) == 0) { + kfree(name); + goto err; + } } + + nft_trans_chain_name(trans) = name; } list_add_tail(&trans->list, &ctx->net->nft.commit_list); return 0; +err: + free_percpu(stats); + kfree(trans); + return err; } static int nf_tables_newchain(struct net *net, struct sock *nlsk, -- cgit v1.2.3 From 6613b6173dee098997229caf1f3b961c49da75e6 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Tue, 17 Jul 2018 21:03:15 +0200 Subject: netfilter: conntrack: dccp: treat SYNC/SYNCACK as invalid if no prior state When first DCCP packet is SYNC or SYNCACK, we insert a new conntrack that has an un-initialized timeout value, i.e. such entry could be reaped at any time. Mark them as INVALID and only ignore SYNC/SYNCACK when connection had an old state. Reported-by: syzbot+6f18401420df260e37ed@syzkaller.appspotmail.com Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_conntrack_proto_dccp.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/net/netfilter/nf_conntrack_proto_dccp.c b/net/netfilter/nf_conntrack_proto_dccp.c index abe647d5b8c6..9ce6336d1e55 100644 --- a/net/netfilter/nf_conntrack_proto_dccp.c +++ b/net/netfilter/nf_conntrack_proto_dccp.c @@ -243,14 +243,14 @@ dccp_state_table[CT_DCCP_ROLE_MAX + 1][DCCP_PKT_SYNCACK + 1][CT_DCCP_MAX + 1] = * We currently ignore Sync packets * * sNO, sRQ, sRS, sPO, sOP, sCR, sCG, sTW */ - sIG, sIG, sIG, sIG, sIG, sIG, sIG, sIG, + sIV, sIG, sIG, sIG, sIG, sIG, sIG, sIG, }, [DCCP_PKT_SYNCACK] = { /* * We currently ignore SyncAck packets * * sNO, sRQ, sRS, sPO, sOP, sCR, sCG, sTW */ - sIG, sIG, sIG, sIG, sIG, sIG, sIG, sIG, + sIV, sIG, sIG, sIG, sIG, sIG, sIG, sIG, }, }, [CT_DCCP_ROLE_SERVER] = { @@ -371,14 +371,14 @@ dccp_state_table[CT_DCCP_ROLE_MAX + 1][DCCP_PKT_SYNCACK + 1][CT_DCCP_MAX + 1] = * We currently ignore Sync packets * * sNO, sRQ, sRS, sPO, sOP, sCR, sCG, sTW */ - sIG, sIG, sIG, sIG, sIG, sIG, sIG, sIG, + sIV, sIG, sIG, sIG, sIG, sIG, sIG, sIG, }, [DCCP_PKT_SYNCACK] = { /* * We currently ignore SyncAck packets * * sNO, sRQ, sRS, sPO, sOP, sCR, sCG, sTW */ - sIG, sIG, sIG, sIG, sIG, sIG, sIG, sIG, + sIV, sIG, sIG, sIG, sIG, sIG, sIG, sIG, }, }, }; -- cgit v1.2.3 From 4d644abf25698362bd33d17c9ddc8f7122c30f17 Mon Sep 17 00:00:00 2001 From: Jerry Zhang Date: Mon, 2 Jul 2018 12:48:08 -0700 Subject: usb: gadget: f_fs: Only return delayed status when len is 0 Commit 1b9ba000 ("Allow function drivers to pause control transfers") states that USB_GADGET_DELAYED_STATUS is only supported if data phase is 0 bytes. It seems that when the length is not 0 bytes, there is no need to explicitly delay the data stage since the transfer is not completed until the user responds. However, when the length is 0, there is no data stage and the transfer is finished once setup() returns, hence there is a need to explicitly delay completion. This manifests as the following bugs: Prior to 946ef68ad4e4 ('Let setup() return USB_GADGET_DELAYED_STATUS'), when setup is 0 bytes, ffs would require user to queue a 0 byte request in order to clear setup state. However, that 0 byte request was actually not needed and would hang and cause errors in other setup requests. After the above commit, 0 byte setups work since the gadget now accepts empty queues to ep0 to clear the delay, but all other setups hang. Fixes: 946ef68ad4e4 ("Let setup() return USB_GADGET_DELAYED_STATUS") Signed-off-by: Jerry Zhang Cc: stable Acked-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/function/f_fs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c index 33e2030503fa..3ada83d81bda 100644 --- a/drivers/usb/gadget/function/f_fs.c +++ b/drivers/usb/gadget/function/f_fs.c @@ -3263,7 +3263,7 @@ static int ffs_func_setup(struct usb_function *f, __ffs_event_add(ffs, FUNCTIONFS_SETUP); spin_unlock_irqrestore(&ffs->ev.waitq.lock, flags); - return USB_GADGET_DELAYED_STATUS; + return creq->wLength == 0 ? USB_GADGET_DELAYED_STATUS : 0; } static bool ffs_func_req_match(struct usb_function *f, -- cgit v1.2.3 From c413767e6698ae24ac1904827314470cacff1497 Mon Sep 17 00:00:00 2001 From: Adam Thomson Date: Tue, 17 Jul 2018 15:36:19 +0100 Subject: usb: typec: tcpm: Fix sink PDO starting index for PPS APDO selection There is a bug in the sink PDO search code when trying to select a PPS APDO. The current code actually sets the starting index for searching to whatever value 'i' is, rather than choosing index 1 to avoid the first PDO (always 5V fixed). As a result, for sources which support PPS but whose PPS APDO index does not match with the supporting sink PPS APDO index for the platform, no valid PPS APDO will be found so this feature will not be permitted. Sadly in testing, both Source and Sink capabilities matched up and this was missed. Code is now updated to correctly set the start index to 1, and testing with additional PPS capable sources show this to work as expected. Signed-off-by: Adam Thomson Fixes: 2eadc33f40d4 ("typec: tcpm: Add core support for sink side PPS") Reviewed-by: Heikki Krogerus Reviewed-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/tcpm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/typec/tcpm.c b/drivers/usb/typec/tcpm.c index 150f43668bec..d1d20252bad8 100644 --- a/drivers/usb/typec/tcpm.c +++ b/drivers/usb/typec/tcpm.c @@ -2140,7 +2140,7 @@ static unsigned int tcpm_pd_select_pps_apdo(struct tcpm_port *port) * PPS APDO. Again skip the first sink PDO as this will * always be 5V 3A. */ - for (j = i; j < port->nr_snk_pdo; j++) { + for (j = 1; j < port->nr_snk_pdo; j++) { pdo = port->snk_pdo[j]; switch (pdo_type(pdo)) { -- cgit v1.2.3 From 9b382768135ee3ff282f828c906574a8478e036b Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Thu, 19 Jul 2018 20:07:59 -0700 Subject: nvme: fix handling of metadata_len for NVME_IOCTL_IO_CMD The old code in nvme_user_cmd() passed the userspace virtual address from nvme_passthru_cmd.metadata as the length of the metadata buffer as well as the address to nvme_submit_user_cmd(). Fixes: 63263d60 ("nvme: Use metadata for passthrough commands") Signed-off-by: Roland Dreier Reviewed-by: Keith Busch Signed-off-by: Christoph Hellwig --- drivers/nvme/host/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 57f33733237f..bf65501e6ed6 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -1233,7 +1233,7 @@ static int nvme_user_cmd(struct nvme_ctrl *ctrl, struct nvme_ns *ns, effects = nvme_passthru_start(ctrl, ns, cmd.opcode); status = nvme_submit_user_cmd(ns ? ns->queue : ctrl->admin_q, &c, (void __user *)(uintptr_t)cmd.addr, cmd.data_len, - (void __user *)(uintptr_t)cmd.metadata, cmd.metadata, + (void __user *)(uintptr_t)cmd.metadata, cmd.metadata_len, 0, &cmd.result, timeout); nvme_passthru_end(ctrl, effects); -- cgit v1.2.3 From d89b7664f76047e7beca8f07e86f2ccfad085a28 Mon Sep 17 00:00:00 2001 From: Zheng Xiaowei Date: Fri, 20 Jul 2018 18:05:11 +0300 Subject: usb: xhci: Fix memory leak in xhci_endpoint_reset() If td_list is not empty the cfg_cmd will not be freed, call xhci_free_command to free it. Signed-off-by: Zheng Xiaowei Cc: Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 2f4850f25e82..68e6132aa8b2 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -3051,6 +3051,7 @@ static void xhci_endpoint_reset(struct usb_hcd *hcd, if (!list_empty(&ep->ring->td_list)) { dev_err(&udev->dev, "EP not empty, refuse reset\n"); spin_unlock_irqrestore(&xhci->lock, flags); + xhci_free_command(xhci, cfg_cmd); goto cleanup; } xhci_queue_stop_endpoint(xhci, stop_cmd, udev->slot_id, ep_index, 0); -- cgit v1.2.3 From 0a06d4256674c4e041945b52044941995fee237d Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Thu, 19 Jul 2018 10:31:00 -0700 Subject: KVM: vmx: use local variable for current_vmptr when emulating VMPTRST Do not expose the address of vmx->nested.current_vmptr to kvm_write_guest_virt_system() as the resulting __copy_to_user() call will trigger a WARN when CONFIG_HARDENED_USERCOPY is enabled. Opportunistically clean up variable names in handle_vmptrst() to improve readability, e.g. vmcs_gva is misleading as the memory operand of VMPTRST is plain memory, not a VMCS. Signed-off-by: Sean Christopherson Tested-by: Peter Shier Reviewed-by: Peter Shier Signed-off-by: Paolo Bonzini --- arch/x86/kvm/vmx.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index e30da9a2430c..548bef5359e6 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -8480,21 +8480,20 @@ static int handle_vmptrld(struct kvm_vcpu *vcpu) /* Emulate the VMPTRST instruction */ static int handle_vmptrst(struct kvm_vcpu *vcpu) { - unsigned long exit_qualification = vmcs_readl(EXIT_QUALIFICATION); - u32 vmx_instruction_info = vmcs_read32(VMX_INSTRUCTION_INFO); - gva_t vmcs_gva; + unsigned long exit_qual = vmcs_readl(EXIT_QUALIFICATION); + u32 instr_info = vmcs_read32(VMX_INSTRUCTION_INFO); + gpa_t current_vmptr = to_vmx(vcpu)->nested.current_vmptr; struct x86_exception e; + gva_t gva; if (!nested_vmx_check_permission(vcpu)) return 1; - if (get_vmx_mem_address(vcpu, exit_qualification, - vmx_instruction_info, true, &vmcs_gva)) + if (get_vmx_mem_address(vcpu, exit_qual, instr_info, true, &gva)) return 1; /* *_system ok, nested_vmx_check_permission has verified cpl=0 */ - if (kvm_write_guest_virt_system(vcpu, vmcs_gva, - (void *)&to_vmx(vcpu)->nested.current_vmptr, - sizeof(u64), &e)) { + if (kvm_write_guest_virt_system(vcpu, gva, (void *)¤t_vmptr, + sizeof(gpa_t), &e)) { kvm_inject_page_fault(vcpu, &e); return 1; } -- cgit v1.2.3 From 63aff65573d73eb8dda4732ad4ef222dd35e4862 Mon Sep 17 00:00:00 2001 From: Roman Kagan Date: Thu, 19 Jul 2018 21:59:07 +0300 Subject: kvm: x86: vmx: fix vpid leak VPID for the nested vcpu is allocated at vmx_create_vcpu whenever nested vmx is turned on with the module parameter. However, it's only freed if the L1 guest has executed VMXON which is not a given. As a result, on a system with nested==on every creation+deletion of an L1 vcpu without running an L2 guest results in leaking one vpid. Since the total number of vpids is limited to 64k, they can eventually get exhausted, preventing L2 from starting. Delay allocation of the L2 vpid until VMXON emulation, thus matching its freeing. Fixes: 5c614b3583e7b6dab0c86356fa36c2bcbb8322a0 Cc: stable@vger.kernel.org Signed-off-by: Roman Kagan Signed-off-by: Paolo Bonzini --- arch/x86/kvm/vmx.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 548bef5359e6..5d8e317c2b04 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -7893,6 +7893,8 @@ static int enter_vmx_operation(struct kvm_vcpu *vcpu) HRTIMER_MODE_REL_PINNED); vmx->nested.preemption_timer.function = vmx_preemption_timer_fn; + vmx->nested.vpid02 = allocate_vpid(); + vmx->nested.vmxon = true; return 0; @@ -10369,11 +10371,9 @@ static struct kvm_vcpu *vmx_create_vcpu(struct kvm *kvm, unsigned int id) goto free_vmcs; } - if (nested) { + if (nested) nested_vmx_setup_ctls_msrs(&vmx->nested.msrs, kvm_vcpu_apicv_active(&vmx->vcpu)); - vmx->nested.vpid02 = allocate_vpid(); - } vmx->nested.posted_intr_nv = -1; vmx->nested.current_vmptr = -1ull; @@ -10390,7 +10390,6 @@ static struct kvm_vcpu *vmx_create_vcpu(struct kvm *kvm, unsigned int id) return &vmx->vcpu; free_vmcs: - free_vpid(vmx->nested.vpid02); free_loaded_vmcs(vmx->loaded_vmcs); free_msrs: kfree(vmx->guest_msrs); -- cgit v1.2.3 From 9e960c0298b5811e5a2c1ebceea6aa3b7bbc61c6 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Tue, 17 Jul 2018 17:42:57 +0200 Subject: ASoC: meson: add axg tdm interface DT bindings documentation Add the DT bindings documentation for axg's TDM interfaces Signed-off-by: Jerome Brunet Signed-off-by: Mark Brown --- .../bindings/sound/amlogic,axg-tdm-iface.txt | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-tdm-iface.txt diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-iface.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-iface.txt new file mode 100644 index 000000000000..cabfb26a5f22 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-iface.txt @@ -0,0 +1,22 @@ +* Amlogic Audio TDM Interfaces + +Required properties: +- compatible: 'amlogic,axg-tdm-iface' +- clocks: list of clock phandle, one for each entry clock-names. +- clock-names: should contain the following: + * "sclk" : bit clock. + * "lrclk": sample clock + * "mclk" : master clock + -> optional if the interface is in clock slave mode. +- #sound-dai-cells: must be 0. + +Example of TDM_A on the A113 SoC: + +tdmif_a: audio-controller@0 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>, + <&clkc_audio AUD_CLKID_MST_A_SCLK>, + <&clkc_audio AUD_CLKID_MST_A_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; +}; -- cgit v1.2.3 From 1a11d88f499ceb69e9b4098ddc36866820335a54 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Tue, 17 Jul 2018 17:42:58 +0200 Subject: ASoC: meson: add tdm formatter base driver Add Amlogic's axg TDM core driver. On this SoC, tdm is bit more complex than usual, mainly because the different TDM input decoders can be attached to any of TDM pad interface, including the output pads. For the this, TDM on this SoC is modeled like this: - TDM interface provides the DAIs the codecs will be attached to. The main responsibility of this driver is to manage the pad format and the TDM clock rates. - TDM Formatters: These are the entities which are actually dealing with the TDM signal. TDMOUT produce a TDM signal from the audio sample provided by FRDDR using the clocks provided the TDM interface. TDMIN feeds TODDR with audio sample using the clocks and TDM signal provided by the TDM Interface. - TDM Streams: This provides the link between 1 DAI stream of the TDM interface and one (or more) TDM formatters. This driver provides the TDM formatter and TDM stream operations. Signed-off-by: Jerome Brunet Signed-off-by: Mark Brown --- sound/soc/meson/Kconfig | 4 + sound/soc/meson/Makefile | 2 + sound/soc/meson/axg-tdm-formatter.c | 381 ++++++++++++++++++++++++++++++++++++ sound/soc/meson/axg-tdm-formatter.h | 39 ++++ sound/soc/meson/axg-tdm.h | 74 +++++++ 5 files changed, 500 insertions(+) create mode 100644 sound/soc/meson/axg-tdm-formatter.c create mode 100644 sound/soc/meson/axg-tdm-formatter.h create mode 100644 sound/soc/meson/axg-tdm.h diff --git a/sound/soc/meson/Kconfig b/sound/soc/meson/Kconfig index 9408214b5854..80a88689491f 100644 --- a/sound/soc/meson/Kconfig +++ b/sound/soc/meson/Kconfig @@ -19,6 +19,10 @@ config SND_MESON_AXG_TODDR Select Y or M to add support for the frontend capture interfaces embedded in the Amlogic AXG SoC family +config SND_MESON_AXG_TDM_FORMATTER + tristate + select REGMAP_MMIO + config SND_MESON_AXG_SPDIFOUT tristate "Amlogic AXG SPDIF Output Support" imply SND_SOC_SPDIF diff --git a/sound/soc/meson/Makefile b/sound/soc/meson/Makefile index d51ae045ef08..a06b56a1c995 100644 --- a/sound/soc/meson/Makefile +++ b/sound/soc/meson/Makefile @@ -3,9 +3,11 @@ snd-soc-meson-axg-fifo-objs := axg-fifo.o snd-soc-meson-axg-frddr-objs := axg-frddr.o snd-soc-meson-axg-toddr-objs := axg-toddr.o +snd-soc-meson-axg-tdm-formatter-objs := axg-tdm-formatter.o snd-soc-meson-axg-spdifout-objs := axg-spdifout.o obj-$(CONFIG_SND_MESON_AXG_FIFO) += snd-soc-meson-axg-fifo.o obj-$(CONFIG_SND_MESON_AXG_FRDDR) += snd-soc-meson-axg-frddr.o obj-$(CONFIG_SND_MESON_AXG_TODDR) += snd-soc-meson-axg-toddr.o +obj-$(CONFIG_SND_MESON_AXG_TDM_FORMATTER) += snd-soc-meson-axg-tdm-formatter.o obj-$(CONFIG_SND_MESON_AXG_SPDIFOUT) += snd-soc-meson-axg-spdifout.o diff --git a/sound/soc/meson/axg-tdm-formatter.c b/sound/soc/meson/axg-tdm-formatter.c new file mode 100644 index 000000000000..43e390f9358a --- /dev/null +++ b/sound/soc/meson/axg-tdm-formatter.c @@ -0,0 +1,381 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright (c) 2018 BayLibre, SAS. +// Author: Jerome Brunet + +#include +#include +#include +#include +#include + +#include "axg-tdm-formatter.h" + +struct axg_tdm_formatter { + struct list_head list; + struct axg_tdm_stream *stream; + const struct axg_tdm_formatter_driver *drv; + struct clk *pclk; + struct clk *sclk; + struct clk *lrclk; + struct clk *sclk_sel; + struct clk *lrclk_sel; + bool enabled; + struct regmap *map; +}; + +int axg_tdm_formatter_set_channel_masks(struct regmap *map, + struct axg_tdm_stream *ts, + unsigned int offset) +{ + unsigned int val, ch = ts->channels; + unsigned long mask; + int i, j; + + /* + * Distribute the channels of the stream over the available slots + * of each TDM lane + */ + for (i = 0; i < AXG_TDM_NUM_LANES; i++) { + val = 0; + mask = ts->mask[i]; + + for (j = find_first_bit(&mask, 32); + (j < 32) && ch; + j = find_next_bit(&mask, 32, j + 1)) { + val |= 1 << j; + ch -= 1; + } + + regmap_write(map, offset, val); + offset += regmap_get_reg_stride(map); + } + + /* + * If we still have channel left at the end of the process, it means + * the stream has more channels than we can accommodate and we should + * have caught this earlier. + */ + if (WARN_ON(ch != 0)) { + pr_err("channel mask error\n"); + return -EINVAL; + } + + return 0; +} +EXPORT_SYMBOL_GPL(axg_tdm_formatter_set_channel_masks); + +static int axg_tdm_formatter_enable(struct axg_tdm_formatter *formatter) +{ + struct axg_tdm_stream *ts = formatter->stream; + bool invert = formatter->drv->invert_sclk; + int ret; + + /* Do nothing if the formatter is already enabled */ + if (formatter->enabled) + return 0; + + /* + * If sclk is inverted, invert it back and provide the inversion + * required by the formatter + */ + invert ^= axg_tdm_sclk_invert(ts->iface->fmt); + ret = clk_set_phase(formatter->sclk, invert ? 180 : 0); + if (ret) + return ret; + + /* Setup the stream parameter in the formatter */ + ret = formatter->drv->ops->prepare(formatter->map, formatter->stream); + if (ret) + return ret; + + /* Enable the signal clocks feeding the formatter */ + ret = clk_prepare_enable(formatter->sclk); + if (ret) + return ret; + + ret = clk_prepare_enable(formatter->lrclk); + if (ret) { + clk_disable_unprepare(formatter->sclk); + return ret; + } + + /* Finally, actually enable the formatter */ + formatter->drv->ops->enable(formatter->map); + formatter->enabled = true; + + return 0; +} + +static void axg_tdm_formatter_disable(struct axg_tdm_formatter *formatter) +{ + /* Do nothing if the formatter is already disabled */ + if (!formatter->enabled) + return; + + formatter->drv->ops->disable(formatter->map); + clk_disable_unprepare(formatter->lrclk); + clk_disable_unprepare(formatter->sclk); + formatter->enabled = false; +} + +static int axg_tdm_formatter_attach(struct axg_tdm_formatter *formatter) +{ + struct axg_tdm_stream *ts = formatter->stream; + int ret = 0; + + mutex_lock(&ts->lock); + + /* Catch up if the stream is already running when we attach */ + if (ts->ready) { + ret = axg_tdm_formatter_enable(formatter); + if (ret) { + pr_err("failed to enable formatter\n"); + goto out; + } + } + + list_add_tail(&formatter->list, &ts->formatter_list); +out: + mutex_unlock(&ts->lock); + return ret; +} + +static void axg_tdm_formatter_dettach(struct axg_tdm_formatter *formatter) +{ + struct axg_tdm_stream *ts = formatter->stream; + + mutex_lock(&ts->lock); + list_del(&formatter->list); + mutex_unlock(&ts->lock); + + axg_tdm_formatter_disable(formatter); +} + +static int axg_tdm_formatter_power_up(struct axg_tdm_formatter *formatter, + struct snd_soc_dapm_widget *w) +{ + struct axg_tdm_stream *ts = formatter->drv->ops->get_stream(w); + int ret; + + /* + * If we don't get a stream at this stage, it would mean that the + * widget is powering up but is not attached to any backend DAI. + * It should not happen, ever ! + */ + if (WARN_ON(!ts)) + return -ENODEV; + + /* Clock our device */ + ret = clk_prepare_enable(formatter->pclk); + if (ret) + return ret; + + /* Reparent the bit clock to the TDM interface */ + ret = clk_set_parent(formatter->sclk_sel, ts->iface->sclk); + if (ret) + goto disable_pclk; + + /* Reparent the sample clock to the TDM interface */ + ret = clk_set_parent(formatter->lrclk_sel, ts->iface->lrclk); + if (ret) + goto disable_pclk; + + formatter->stream = ts; + ret = axg_tdm_formatter_attach(formatter); + if (ret) + goto disable_pclk; + + return 0; + +disable_pclk: + clk_disable_unprepare(formatter->pclk); + return ret; +} + +static void axg_tdm_formatter_power_down(struct axg_tdm_formatter *formatter) +{ + axg_tdm_formatter_dettach(formatter); + clk_disable_unprepare(formatter->pclk); + formatter->stream = NULL; +} + +int axg_tdm_formatter_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *control, + int event) +{ + struct snd_soc_component *c = snd_soc_dapm_to_component(w->dapm); + struct axg_tdm_formatter *formatter = snd_soc_component_get_drvdata(c); + int ret = 0; + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + ret = axg_tdm_formatter_power_up(formatter, w); + break; + + case SND_SOC_DAPM_PRE_PMD: + axg_tdm_formatter_power_down(formatter); + break; + + default: + dev_err(c->dev, "Unexpected event %d\n", event); + return -EINVAL; + } + + return ret; +} +EXPORT_SYMBOL_GPL(axg_tdm_formatter_event); + +int axg_tdm_formatter_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + const struct axg_tdm_formatter_driver *drv; + struct axg_tdm_formatter *formatter; + struct resource *res; + void __iomem *regs; + int ret; + + drv = of_device_get_match_data(dev); + if (!drv) { + dev_err(dev, "failed to match device\n"); + return -ENODEV; + } + + formatter = devm_kzalloc(dev, sizeof(*formatter), GFP_KERNEL); + if (!formatter) + return -ENOMEM; + platform_set_drvdata(pdev, formatter); + formatter->drv = drv; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + regs = devm_ioremap_resource(dev, res); + if (IS_ERR(regs)) + return PTR_ERR(regs); + + formatter->map = devm_regmap_init_mmio(dev, regs, drv->regmap_cfg); + if (IS_ERR(formatter->map)) { + dev_err(dev, "failed to init regmap: %ld\n", + PTR_ERR(formatter->map)); + return PTR_ERR(formatter->map); + } + + /* Peripharal clock */ + formatter->pclk = devm_clk_get(dev, "pclk"); + if (IS_ERR(formatter->pclk)) { + ret = PTR_ERR(formatter->pclk); + if (ret != -EPROBE_DEFER) + dev_err(dev, "failed to get pclk: %d\n", ret); + return ret; + } + + /* Formatter bit clock */ + formatter->sclk = devm_clk_get(dev, "sclk"); + if (IS_ERR(formatter->sclk)) { + ret = PTR_ERR(formatter->sclk); + if (ret != -EPROBE_DEFER) + dev_err(dev, "failed to get sclk: %d\n", ret); + return ret; + } + + /* Formatter sample clock */ + formatter->lrclk = devm_clk_get(dev, "lrclk"); + if (IS_ERR(formatter->lrclk)) { + ret = PTR_ERR(formatter->lrclk); + if (ret != -EPROBE_DEFER) + dev_err(dev, "failed to get lrclk: %d\n", ret); + return ret; + } + + /* Formatter bit clock input multiplexer */ + formatter->sclk_sel = devm_clk_get(dev, "sclk_sel"); + if (IS_ERR(formatter->sclk_sel)) { + ret = PTR_ERR(formatter->sclk_sel); + if (ret != -EPROBE_DEFER) + dev_err(dev, "failed to get sclk_sel: %d\n", ret); + return ret; + } + + /* Formatter sample clock input multiplexer */ + formatter->lrclk_sel = devm_clk_get(dev, "lrclk_sel"); + if (IS_ERR(formatter->lrclk_sel)) { + ret = PTR_ERR(formatter->lrclk_sel); + if (ret != -EPROBE_DEFER) + dev_err(dev, "failed to get lrclk_sel: %d\n", ret); + return ret; + } + + return devm_snd_soc_register_component(dev, drv->component_drv, + NULL, 0); +} +EXPORT_SYMBOL_GPL(axg_tdm_formatter_probe); + +int axg_tdm_stream_start(struct axg_tdm_stream *ts) +{ + struct axg_tdm_formatter *formatter; + int ret = 0; + + mutex_lock(&ts->lock); + ts->ready = true; + + /* Start all the formatters attached to the stream */ + list_for_each_entry(formatter, &ts->formatter_list, list) { + ret = axg_tdm_formatter_enable(formatter); + if (ret) { + pr_err("failed to start tdm stream\n"); + goto out; + } + } + +out: + mutex_unlock(&ts->lock); + return ret; +} +EXPORT_SYMBOL_GPL(axg_tdm_stream_start); + +void axg_tdm_stream_stop(struct axg_tdm_stream *ts) +{ + struct axg_tdm_formatter *formatter; + + mutex_lock(&ts->lock); + ts->ready = false; + + /* Stop all the formatters attached to the stream */ + list_for_each_entry(formatter, &ts->formatter_list, list) { + axg_tdm_formatter_disable(formatter); + } + + mutex_unlock(&ts->lock); +} +EXPORT_SYMBOL_GPL(axg_tdm_stream_stop); + +struct axg_tdm_stream *axg_tdm_stream_alloc(struct axg_tdm_iface *iface) +{ + struct axg_tdm_stream *ts; + + ts = kzalloc(sizeof(*ts), GFP_KERNEL); + if (ts) { + INIT_LIST_HEAD(&ts->formatter_list); + mutex_init(&ts->lock); + ts->iface = iface; + } + + return ts; +} +EXPORT_SYMBOL_GPL(axg_tdm_stream_alloc); + +void axg_tdm_stream_free(struct axg_tdm_stream *ts) +{ + /* + * If the list is not empty, it would mean that one of the formatter + * widget is still powered and attached to the interface while we + * we are removing the TDM DAI. It should not be possible + */ + WARN_ON(!list_empty(&ts->formatter_list)); + mutex_destroy(&ts->lock); + kfree(ts); +} +EXPORT_SYMBOL_GPL(axg_tdm_stream_free); + +MODULE_DESCRIPTION("Amlogic AXG TDM formatter driver"); +MODULE_AUTHOR("Jerome Brunet "); +MODULE_LICENSE("GPL v2"); diff --git a/sound/soc/meson/axg-tdm-formatter.h b/sound/soc/meson/axg-tdm-formatter.h new file mode 100644 index 000000000000..cf947caf3cb1 --- /dev/null +++ b/sound/soc/meson/axg-tdm-formatter.h @@ -0,0 +1,39 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) + * + * Copyright (c) 2018 Baylibre SAS. + * Author: Jerome Brunet + */ + +#ifndef _MESON_AXG_TDM_FORMATTER_H +#define _MESON_AXG_TDM_FORMATTER_H + +#include "axg-tdm.h" + +struct platform_device; +struct regmap; +struct snd_soc_dapm_widget; +struct snd_kcontrol; + +struct axg_tdm_formatter_ops { + struct axg_tdm_stream *(*get_stream)(struct snd_soc_dapm_widget *w); + void (*enable)(struct regmap *map); + void (*disable)(struct regmap *map); + int (*prepare)(struct regmap *map, struct axg_tdm_stream *ts); +}; + +struct axg_tdm_formatter_driver { + const struct snd_soc_component_driver *component_drv; + const struct regmap_config *regmap_cfg; + const struct axg_tdm_formatter_ops *ops; + bool invert_sclk; +}; + +int axg_tdm_formatter_set_channel_masks(struct regmap *map, + struct axg_tdm_stream *ts, + unsigned int offset); +int axg_tdm_formatter_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *control, + int event); +int axg_tdm_formatter_probe(struct platform_device *pdev); + +#endif /* _MESON_AXG_TDM_FORMATTER_H */ diff --git a/sound/soc/meson/axg-tdm.h b/sound/soc/meson/axg-tdm.h new file mode 100644 index 000000000000..435d95b86457 --- /dev/null +++ b/sound/soc/meson/axg-tdm.h @@ -0,0 +1,74 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) + * + * Copyright (c) 2018 Baylibre SAS. + * Author: Jerome Brunet + */ + +#ifndef _MESON_AXG_TDM_H +#define _MESON_AXG_TDM_H + +#include +#include +#include +#include +#include + +#define AXG_TDM_NUM_LANES 4 +#define AXG_TDM_CHANNEL_MAX 128 +#define AXG_TDM_RATES (SNDRV_PCM_RATE_5512 | \ + SNDRV_PCM_RATE_8000_192000) +#define AXG_TDM_FORMATS (SNDRV_PCM_FMTBIT_S8 | \ + SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S20_LE | \ + SNDRV_PCM_FMTBIT_S24_LE | \ + SNDRV_PCM_FMTBIT_S32_LE) + +struct axg_tdm_iface { + struct clk *sclk; + struct clk *lrclk; + struct clk *mclk; + unsigned long mclk_rate; + + /* format is common to all the DAIs of the iface */ + unsigned int fmt; + unsigned int slots; + unsigned int slot_width; + + /* For component wide symmetry */ + int rate; +}; + +static inline bool axg_tdm_lrclk_invert(unsigned int fmt) +{ + return (fmt & SND_SOC_DAIFMT_I2S) ^ + !!(fmt & (SND_SOC_DAIFMT_IB_IF | SND_SOC_DAIFMT_NB_IF)); +} + +static inline bool axg_tdm_sclk_invert(unsigned int fmt) +{ + return fmt & (SND_SOC_DAIFMT_IB_IF | SND_SOC_DAIFMT_IB_NF); +} + +struct axg_tdm_stream { + struct axg_tdm_iface *iface; + struct list_head formatter_list; + struct mutex lock; + unsigned int channels; + unsigned int width; + unsigned int physical_width; + u32 *mask; + bool ready; +}; + +struct axg_tdm_stream *axg_tdm_stream_alloc(struct axg_tdm_iface *iface); +void axg_tdm_stream_free(struct axg_tdm_stream *ts); +int axg_tdm_stream_start(struct axg_tdm_stream *ts); +void axg_tdm_stream_stop(struct axg_tdm_stream *ts); + +static inline int axg_tdm_stream_reset(struct axg_tdm_stream *ts) +{ + axg_tdm_stream_stop(ts); + return axg_tdm_stream_start(ts); +} + +#endif /* _MESON_AXG_TDM_H */ -- cgit v1.2.3 From d60e4f1e4be5e2dfb55fb084b119aed094227a35 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Tue, 17 Jul 2018 17:42:59 +0200 Subject: ASoC: meson: add tdm interface driver Add Amlogic's axg TDM interface driver. This driver manages the format and clocks provided on the pads. On this SoC, each stream direction provides 4 serial lanes. This makes a maximum of 8 channels in i2s modes and 128 channels in DSP modes. While each lanes operate on the same slot number (same bit clock), they may have different TDM masks. This requires to provide a function to let the card set the 4 masks, in lieu of the usual set_tdm_slots() callback of the dai driver. Signed-off-by: Jerome Brunet Signed-off-by: Mark Brown --- sound/soc/meson/Kconfig | 4 + sound/soc/meson/Makefile | 2 + sound/soc/meson/axg-tdm-interface.c | 542 ++++++++++++++++++++++++++++++++++++ sound/soc/meson/axg-tdm.h | 4 + 4 files changed, 552 insertions(+) create mode 100644 sound/soc/meson/axg-tdm-interface.c diff --git a/sound/soc/meson/Kconfig b/sound/soc/meson/Kconfig index 80a88689491f..869b359c2ce7 100644 --- a/sound/soc/meson/Kconfig +++ b/sound/soc/meson/Kconfig @@ -23,6 +23,10 @@ config SND_MESON_AXG_TDM_FORMATTER tristate select REGMAP_MMIO +config SND_MESON_AXG_TDM_INTERFACE + tristate + select SND_MESON_AXG_TDM_FORMATTER + config SND_MESON_AXG_SPDIFOUT tristate "Amlogic AXG SPDIF Output Support" imply SND_SOC_SPDIF diff --git a/sound/soc/meson/Makefile b/sound/soc/meson/Makefile index a06b56a1c995..1a8eb77402e3 100644 --- a/sound/soc/meson/Makefile +++ b/sound/soc/meson/Makefile @@ -4,10 +4,12 @@ snd-soc-meson-axg-fifo-objs := axg-fifo.o snd-soc-meson-axg-frddr-objs := axg-frddr.o snd-soc-meson-axg-toddr-objs := axg-toddr.o snd-soc-meson-axg-tdm-formatter-objs := axg-tdm-formatter.o +snd-soc-meson-axg-tdm-interface-objs := axg-tdm-interface.o snd-soc-meson-axg-spdifout-objs := axg-spdifout.o obj-$(CONFIG_SND_MESON_AXG_FIFO) += snd-soc-meson-axg-fifo.o obj-$(CONFIG_SND_MESON_AXG_FRDDR) += snd-soc-meson-axg-frddr.o obj-$(CONFIG_SND_MESON_AXG_TODDR) += snd-soc-meson-axg-toddr.o obj-$(CONFIG_SND_MESON_AXG_TDM_FORMATTER) += snd-soc-meson-axg-tdm-formatter.o +obj-$(CONFIG_SND_MESON_AXG_TDM_INTERFACE) += snd-soc-meson-axg-tdm-interface.o obj-$(CONFIG_SND_MESON_AXG_SPDIFOUT) += snd-soc-meson-axg-spdifout.o diff --git a/sound/soc/meson/axg-tdm-interface.c b/sound/soc/meson/axg-tdm-interface.c new file mode 100644 index 000000000000..7b8baf46d968 --- /dev/null +++ b/sound/soc/meson/axg-tdm-interface.c @@ -0,0 +1,542 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright (c) 2018 BayLibre, SAS. +// Author: Jerome Brunet + +#include +#include +#include +#include +#include +#include + +#include "axg-tdm.h" + +enum { + TDM_IFACE_PAD, + TDM_IFACE_LOOPBACK, +}; + +static unsigned int axg_tdm_slots_total(u32 *mask) +{ + unsigned int slots = 0; + int i; + + if (!mask) + return 0; + + /* Count the total number of slots provided by all 4 lanes */ + for (i = 0; i < AXG_TDM_NUM_LANES; i++) + slots += hweight32(mask[i]); + + return slots; +} + +int axg_tdm_set_tdm_slots(struct snd_soc_dai *dai, u32 *tx_mask, + u32 *rx_mask, unsigned int slots, + unsigned int slot_width) +{ + struct axg_tdm_iface *iface = snd_soc_dai_get_drvdata(dai); + struct axg_tdm_stream *tx = (struct axg_tdm_stream *) + dai->playback_dma_data; + struct axg_tdm_stream *rx = (struct axg_tdm_stream *) + dai->capture_dma_data; + unsigned int tx_slots, rx_slots; + + tx_slots = axg_tdm_slots_total(tx_mask); + rx_slots = axg_tdm_slots_total(rx_mask); + + /* We should at least have a slot for a valid interface */ + if (!tx_slots && !rx_slots) { + dev_err(dai->dev, "interface has no slot\n"); + return -EINVAL; + } + + /* + * Amend the dai driver channel number and let dpcm channel merge do + * its job + */ + if (tx) { + tx->mask = tx_mask; + dai->driver->playback.channels_max = tx_slots; + } + + if (rx) { + rx->mask = rx_mask; + dai->driver->capture.channels_max = rx_slots; + } + + iface->slots = slots; + + switch (slot_width) { + case 0: + /* defaults width to 32 if not provided */ + iface->slot_width = 32; + break; + case 8: + case 16: + case 24: + case 32: + iface->slot_width = slot_width; + break; + default: + dev_err(dai->dev, "unsupported slot width: %d\n", slot_width); + return -EINVAL; + } + + return 0; +} +EXPORT_SYMBOL_GPL(axg_tdm_set_tdm_slots); + +static int axg_tdm_iface_set_sysclk(struct snd_soc_dai *dai, int clk_id, + unsigned int freq, int dir) +{ + struct axg_tdm_iface *iface = snd_soc_dai_get_drvdata(dai); + int ret = -ENOTSUPP; + + if (dir == SND_SOC_CLOCK_OUT && clk_id == 0) { + if (!iface->mclk) { + dev_warn(dai->dev, "master clock not provided\n"); + } else { + ret = clk_set_rate(iface->mclk, freq); + if (!ret) + iface->mclk_rate = freq; + } + } + + return ret; +} + +static int axg_tdm_iface_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) +{ + struct axg_tdm_iface *iface = snd_soc_dai_get_drvdata(dai); + + /* These modes are not supported */ + if (fmt & (SND_SOC_DAIFMT_CBS_CFM | SND_SOC_DAIFMT_CBM_CFS)) { + dev_err(dai->dev, "only CBS_CFS and CBM_CFM are supported\n"); + return -EINVAL; + } + + /* If the TDM interface is the clock master, it requires mclk */ + if (!iface->mclk && (fmt & SND_SOC_DAIFMT_CBS_CFS)) { + dev_err(dai->dev, "cpu clock master: mclk missing\n"); + return -ENODEV; + } + + iface->fmt = fmt; + return 0; +} + +static int axg_tdm_iface_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct axg_tdm_iface *iface = snd_soc_dai_get_drvdata(dai); + struct axg_tdm_stream *ts = + snd_soc_dai_get_dma_data(dai, substream); + int ret; + + if (!axg_tdm_slots_total(ts->mask)) { + dev_err(dai->dev, "interface has not slots\n"); + return -EINVAL; + } + + /* Apply component wide rate symmetry */ + if (dai->component->active) { + ret = snd_pcm_hw_constraint_single(substream->runtime, + SNDRV_PCM_HW_PARAM_RATE, + iface->rate); + if (ret < 0) { + dev_err(dai->dev, + "can't set iface rate constraint\n"); + return ret; + } + } + + return 0; +} + +static int axg_tdm_iface_set_stream(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct axg_tdm_iface *iface = snd_soc_dai_get_drvdata(dai); + struct axg_tdm_stream *ts = snd_soc_dai_get_dma_data(dai, substream); + unsigned int channels = params_channels(params); + unsigned int width = params_width(params); + + /* Save rate and sample_bits for component symmetry */ + iface->rate = params_rate(params); + + /* Make sure this interface can cope with the stream */ + if (axg_tdm_slots_total(ts->mask) < channels) { + dev_err(dai->dev, "not enough slots for channels\n"); + return -EINVAL; + } + + if (iface->slot_width < width) { + dev_err(dai->dev, "incompatible slots width for stream\n"); + return -EINVAL; + } + + /* Save the parameter for tdmout/tdmin widgets */ + ts->physical_width = params_physical_width(params); + ts->width = params_width(params); + ts->channels = params_channels(params); + + return 0; +} + +static int axg_tdm_iface_set_lrclk(struct snd_soc_dai *dai, + struct snd_pcm_hw_params *params) +{ + struct axg_tdm_iface *iface = snd_soc_dai_get_drvdata(dai); + unsigned int ratio_num; + int ret; + + ret = clk_set_rate(iface->lrclk, params_rate(params)); + if (ret) { + dev_err(dai->dev, "setting sample clock failed: %d\n", ret); + return ret; + } + + switch (iface->fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + case SND_SOC_DAIFMT_LEFT_J: + case SND_SOC_DAIFMT_RIGHT_J: + /* 50% duty cycle ratio */ + ratio_num = 1; + break; + + case SND_SOC_DAIFMT_DSP_A: + case SND_SOC_DAIFMT_DSP_B: + /* + * A zero duty cycle ratio will result in setting the mininum + * ratio possible which, for this clock, is 1 cycle of the + * parent bclk clock high and the rest low, This is exactly + * what we want here. + */ + ratio_num = 0; + break; + + default: + return -EINVAL; + } + + ret = clk_set_duty_cycle(iface->lrclk, ratio_num, 2); + if (ret) { + dev_err(dai->dev, + "setting sample clock duty cycle failed: %d\n", ret); + return ret; + } + + /* Set sample clock inversion */ + ret = clk_set_phase(iface->lrclk, + axg_tdm_lrclk_invert(iface->fmt) ? 180 : 0); + if (ret) { + dev_err(dai->dev, + "setting sample clock phase failed: %d\n", ret); + return ret; + } + + return 0; +} + +static int axg_tdm_iface_set_sclk(struct snd_soc_dai *dai, + struct snd_pcm_hw_params *params) +{ + struct axg_tdm_iface *iface = snd_soc_dai_get_drvdata(dai); + unsigned long srate; + int ret; + + srate = iface->slots * iface->slot_width * params_rate(params); + + if (!iface->mclk_rate) { + /* If no specific mclk is requested, default to bit clock * 4 */ + clk_set_rate(iface->mclk, 4 * srate); + } else { + /* Check if we can actually get the bit clock from mclk */ + if (iface->mclk_rate % srate) { + dev_err(dai->dev, + "can't derive sclk %lu from mclk %lu\n", + srate, iface->mclk_rate); + return -EINVAL; + } + } + + ret = clk_set_rate(iface->sclk, srate); + if (ret) { + dev_err(dai->dev, "setting bit clock failed: %d\n", ret); + return ret; + } + + /* Set the bit clock inversion */ + ret = clk_set_phase(iface->sclk, + axg_tdm_sclk_invert(iface->fmt) ? 0 : 180); + if (ret) { + dev_err(dai->dev, "setting bit clock phase failed: %d\n", ret); + return ret; + } + + return ret; +} + +static int axg_tdm_iface_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct axg_tdm_iface *iface = snd_soc_dai_get_drvdata(dai); + int ret; + + switch (iface->fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + case SND_SOC_DAIFMT_LEFT_J: + case SND_SOC_DAIFMT_RIGHT_J: + if (iface->slots > 2) { + dev_err(dai->dev, "bad slot number for format: %d\n", + iface->slots); + return -EINVAL; + } + break; + + case SND_SOC_DAI_FORMAT_DSP_A: + case SND_SOC_DAI_FORMAT_DSP_B: + break; + + default: + dev_err(dai->dev, "unsupported dai format\n"); + return -EINVAL; + } + + ret = axg_tdm_iface_set_stream(substream, params, dai); + if (ret) + return ret; + + if (iface->fmt & SND_SOC_DAIFMT_CBS_CFS) { + ret = axg_tdm_iface_set_sclk(dai, params); + if (ret) + return ret; + + ret = axg_tdm_iface_set_lrclk(dai, params); + if (ret) + return ret; + } + + return 0; +} + +static int axg_tdm_iface_hw_free(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct axg_tdm_stream *ts = snd_soc_dai_get_dma_data(dai, substream); + + /* Stop all attached formatters */ + axg_tdm_stream_stop(ts); + + return 0; +} + +static int axg_tdm_iface_prepare(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct axg_tdm_stream *ts = snd_soc_dai_get_dma_data(dai, substream); + + /* Force all attached formatters to update */ + return axg_tdm_stream_reset(ts); +} + +static int axg_tdm_iface_remove_dai(struct snd_soc_dai *dai) +{ + if (dai->capture_dma_data) + axg_tdm_stream_free(dai->capture_dma_data); + + if (dai->playback_dma_data) + axg_tdm_stream_free(dai->playback_dma_data); + + return 0; +} + +static int axg_tdm_iface_probe_dai(struct snd_soc_dai *dai) +{ + struct axg_tdm_iface *iface = snd_soc_dai_get_drvdata(dai); + + if (dai->capture_widget) { + dai->capture_dma_data = axg_tdm_stream_alloc(iface); + if (!dai->capture_dma_data) + return -ENOMEM; + } + + if (dai->playback_widget) { + dai->playback_dma_data = axg_tdm_stream_alloc(iface); + if (!dai->playback_dma_data) { + axg_tdm_iface_remove_dai(dai); + return -ENOMEM; + } + } + + return 0; +} + +static const struct snd_soc_dai_ops axg_tdm_iface_ops = { + .set_sysclk = axg_tdm_iface_set_sysclk, + .set_fmt = axg_tdm_iface_set_fmt, + .startup = axg_tdm_iface_startup, + .hw_params = axg_tdm_iface_hw_params, + .prepare = axg_tdm_iface_prepare, + .hw_free = axg_tdm_iface_hw_free, +}; + +/* TDM Backend DAIs */ +static const struct snd_soc_dai_driver axg_tdm_iface_dai_drv[] = { + [TDM_IFACE_PAD] = { + .name = "TDM Pad", + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = AXG_TDM_CHANNEL_MAX, + .rates = AXG_TDM_RATES, + .formats = AXG_TDM_FORMATS, + }, + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = AXG_TDM_CHANNEL_MAX, + .rates = AXG_TDM_RATES, + .formats = AXG_TDM_FORMATS, + }, + .id = TDM_IFACE_PAD, + .ops = &axg_tdm_iface_ops, + .probe = axg_tdm_iface_probe_dai, + .remove = axg_tdm_iface_remove_dai, + }, + [TDM_IFACE_LOOPBACK] = { + .name = "TDM Loopback", + .capture = { + .stream_name = "Loopback", + .channels_min = 1, + .channels_max = AXG_TDM_CHANNEL_MAX, + .rates = AXG_TDM_RATES, + .formats = AXG_TDM_FORMATS, + }, + .id = TDM_IFACE_LOOPBACK, + .ops = &axg_tdm_iface_ops, + .probe = axg_tdm_iface_probe_dai, + .remove = axg_tdm_iface_remove_dai, + }, +}; + +static int axg_tdm_iface_set_bias_level(struct snd_soc_component *component, + enum snd_soc_bias_level level) +{ + struct axg_tdm_iface *iface = snd_soc_component_get_drvdata(component); + enum snd_soc_bias_level now = + snd_soc_component_get_bias_level(component); + int ret = 0; + + switch (level) { + case SND_SOC_BIAS_PREPARE: + if (now == SND_SOC_BIAS_STANDBY) + ret = clk_prepare_enable(iface->mclk); + break; + + case SND_SOC_BIAS_STANDBY: + if (now == SND_SOC_BIAS_PREPARE) + clk_disable_unprepare(iface->mclk); + break; + + case SND_SOC_BIAS_OFF: + case SND_SOC_BIAS_ON: + break; + } + + return ret; +} + +static const struct snd_soc_component_driver axg_tdm_iface_component_drv = { + .set_bias_level = axg_tdm_iface_set_bias_level, +}; + +static const struct of_device_id axg_tdm_iface_of_match[] = { + { .compatible = "amlogic,axg-tdm-iface", }, + {} +}; +MODULE_DEVICE_TABLE(of, axg_tdm_iface_of_match); + +static int axg_tdm_iface_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct snd_soc_dai_driver *dai_drv; + struct axg_tdm_iface *iface; + int ret, i; + + iface = devm_kzalloc(dev, sizeof(*iface), GFP_KERNEL); + if (!iface) + return -ENOMEM; + platform_set_drvdata(pdev, iface); + + /* + * Duplicate dai driver: depending on the slot masks configuration + * We'll change the number of channel provided by DAI stream, so dpcm + * channel merge can be done properly + */ + dai_drv = devm_kcalloc(dev, ARRAY_SIZE(axg_tdm_iface_dai_drv), + sizeof(*dai_drv), GFP_KERNEL); + if (!dai_drv) + return -ENOMEM; + + for (i = 0; i < ARRAY_SIZE(axg_tdm_iface_dai_drv); i++) + memcpy(&dai_drv[i], &axg_tdm_iface_dai_drv[i], + sizeof(*dai_drv)); + + /* Bit clock provided on the pad */ + iface->sclk = devm_clk_get(dev, "sclk"); + if (IS_ERR(iface->sclk)) { + ret = PTR_ERR(iface->sclk); + if (ret != -EPROBE_DEFER) + dev_err(dev, "failed to get sclk: %d\n", ret); + return ret; + } + + /* Sample clock provided on the pad */ + iface->lrclk = devm_clk_get(dev, "lrclk"); + if (IS_ERR(iface->lrclk)) { + ret = PTR_ERR(iface->lrclk); + if (ret != -EPROBE_DEFER) + dev_err(dev, "failed to get lrclk: %d\n", ret); + return ret; + } + + /* + * mclk maybe be missing when the cpu dai is in slave mode and + * the codec does not require it to provide a master clock. + * At this point, ignore the error if mclk is missing. We'll + * throw an error if the cpu dai is master and mclk is missing + */ + iface->mclk = devm_clk_get(dev, "mclk"); + if (IS_ERR(iface->mclk)) { + ret = PTR_ERR(iface->mclk); + if (ret == -ENOENT) { + iface->mclk = NULL; + } else { + if (ret != -EPROBE_DEFER) + dev_err(dev, "failed to get mclk: %d\n", ret); + return ret; + } + } + + return devm_snd_soc_register_component(dev, + &axg_tdm_iface_component_drv, dai_drv, + ARRAY_SIZE(axg_tdm_iface_dai_drv)); +} + +static struct platform_driver axg_tdm_iface_pdrv = { + .probe = axg_tdm_iface_probe, + .driver = { + .name = "axg-tdm-iface", + .of_match_table = axg_tdm_iface_of_match, + }, +}; +module_platform_driver(axg_tdm_iface_pdrv); + +MODULE_DESCRIPTION("Amlogic AXG TDM interface driver"); +MODULE_AUTHOR("Jerome Brunet "); +MODULE_LICENSE("GPL v2"); diff --git a/sound/soc/meson/axg-tdm.h b/sound/soc/meson/axg-tdm.h index 435d95b86457..e578b6f40a07 100644 --- a/sound/soc/meson/axg-tdm.h +++ b/sound/soc/meson/axg-tdm.h @@ -71,4 +71,8 @@ static inline int axg_tdm_stream_reset(struct axg_tdm_stream *ts) return axg_tdm_stream_start(ts); } +int axg_tdm_set_tdm_slots(struct snd_soc_dai *dai, u32 *tx_mask, + u32 *rx_mask, unsigned int slots, + unsigned int slot_width); + #endif /* _MESON_AXG_TDM_H */ -- cgit v1.2.3 From c41c2a355b86368608377eaf3df442ec0f342f1e Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Tue, 17 Jul 2018 17:43:00 +0200 Subject: ASoC: meson: add tdm output driver Add Amlogic's axg tdm output driver which pulls data from FRDDR fifo and produce the TDM signals for 4 output lanes. Signed-off-by: Jerome Brunet Signed-off-by: Mark Brown --- sound/soc/meson/Kconfig | 8 ++ sound/soc/meson/Makefile | 2 + sound/soc/meson/axg-tdmout.c | 259 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 269 insertions(+) create mode 100644 sound/soc/meson/axg-tdmout.c diff --git a/sound/soc/meson/Kconfig b/sound/soc/meson/Kconfig index 869b359c2ce7..08a522b77749 100644 --- a/sound/soc/meson/Kconfig +++ b/sound/soc/meson/Kconfig @@ -27,6 +27,14 @@ config SND_MESON_AXG_TDM_INTERFACE tristate select SND_MESON_AXG_TDM_FORMATTER +config SND_MESON_AXG_TDMOUT + tristate "Amlogic AXG TDM Output Support" + select SND_MESON_AXG_TDM_FORMATTER + select SND_MESON_AXG_TDM_INTERFACE + help + Select Y or M to add support for TDM output formatter embedded + in the Amlogic AXG SoC family + config SND_MESON_AXG_SPDIFOUT tristate "Amlogic AXG SPDIF Output Support" imply SND_SOC_SPDIF diff --git a/sound/soc/meson/Makefile b/sound/soc/meson/Makefile index 1a8eb77402e3..a665c6b76a95 100644 --- a/sound/soc/meson/Makefile +++ b/sound/soc/meson/Makefile @@ -5,6 +5,7 @@ snd-soc-meson-axg-frddr-objs := axg-frddr.o snd-soc-meson-axg-toddr-objs := axg-toddr.o snd-soc-meson-axg-tdm-formatter-objs := axg-tdm-formatter.o snd-soc-meson-axg-tdm-interface-objs := axg-tdm-interface.o +snd-soc-meson-axg-tdmout-objs := axg-tdmout.o snd-soc-meson-axg-spdifout-objs := axg-spdifout.o obj-$(CONFIG_SND_MESON_AXG_FIFO) += snd-soc-meson-axg-fifo.o @@ -12,4 +13,5 @@ obj-$(CONFIG_SND_MESON_AXG_FRDDR) += snd-soc-meson-axg-frddr.o obj-$(CONFIG_SND_MESON_AXG_TODDR) += snd-soc-meson-axg-toddr.o obj-$(CONFIG_SND_MESON_AXG_TDM_FORMATTER) += snd-soc-meson-axg-tdm-formatter.o obj-$(CONFIG_SND_MESON_AXG_TDM_INTERFACE) += snd-soc-meson-axg-tdm-interface.o +obj-$(CONFIG_SND_MESON_AXG_TDMOUT) += snd-soc-meson-axg-tdmout.o obj-$(CONFIG_SND_MESON_AXG_SPDIFOUT) += snd-soc-meson-axg-spdifout.o diff --git a/sound/soc/meson/axg-tdmout.c b/sound/soc/meson/axg-tdmout.c new file mode 100644 index 000000000000..f73368ee1088 --- /dev/null +++ b/sound/soc/meson/axg-tdmout.c @@ -0,0 +1,259 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright (c) 2018 BayLibre, SAS. +// Author: Jerome Brunet + +#include +#include +#include +#include +#include + +#include "axg-tdm-formatter.h" + +#define TDMOUT_CTRL0 0x00 +#define TDMOUT_CTRL0_BITNUM_MASK GENMASK(4, 0) +#define TDMOUT_CTRL0_BITNUM(x) ((x) << 0) +#define TDMOUT_CTRL0_SLOTNUM_MASK GENMASK(9, 5) +#define TDMOUT_CTRL0_SLOTNUM(x) ((x) << 5) +#define TDMOUT_CTRL0_INIT_BITNUM_MASK GENMASK(19, 15) +#define TDMOUT_CTRL0_INIT_BITNUM(x) ((x) << 15) +#define TDMOUT_CTRL0_ENABLE BIT(31) +#define TDMOUT_CTRL0_RST_OUT BIT(29) +#define TDMOUT_CTRL0_RST_IN BIT(28) +#define TDMOUT_CTRL1 0x04 +#define TDMOUT_CTRL1_TYPE_MASK GENMASK(6, 4) +#define TDMOUT_CTRL1_TYPE(x) ((x) << 4) +#define TDMOUT_CTRL1_MSB_POS_MASK GENMASK(12, 8) +#define TDMOUT_CTRL1_MSB_POS(x) ((x) << 8) +#define TDMOUT_CTRL1_SEL_SHIFT 24 +#define TDMOUT_CTRL1_GAIN_EN 26 +#define TDMOUT_CTRL1_WS_INV BIT(28) +#define TDMOUT_SWAP 0x08 +#define TDMOUT_MASK0 0x0c +#define TDMOUT_MASK1 0x10 +#define TDMOUT_MASK2 0x14 +#define TDMOUT_MASK3 0x18 +#define TDMOUT_STAT 0x1c +#define TDMOUT_GAIN0 0x20 +#define TDMOUT_GAIN1 0x24 +#define TDMOUT_MUTE_VAL 0x28 +#define TDMOUT_MUTE0 0x2c +#define TDMOUT_MUTE1 0x30 +#define TDMOUT_MUTE2 0x34 +#define TDMOUT_MUTE3 0x38 +#define TDMOUT_MASK_VAL 0x3c + +static const struct regmap_config axg_tdmout_regmap_cfg = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, + .max_register = TDMOUT_MASK_VAL, +}; + +static const struct snd_kcontrol_new axg_tdmout_controls[] = { + SOC_DOUBLE("Lane 0 Volume", TDMOUT_GAIN0, 0, 8, 255, 0), + SOC_DOUBLE("Lane 1 Volume", TDMOUT_GAIN0, 16, 24, 255, 0), + SOC_DOUBLE("Lane 2 Volume", TDMOUT_GAIN1, 0, 8, 255, 0), + SOC_DOUBLE("Lane 3 Volume", TDMOUT_GAIN1, 16, 24, 255, 0), + SOC_SINGLE("Gain Enable Switch", TDMOUT_CTRL1, + TDMOUT_CTRL1_GAIN_EN, 1, 0), +}; + +static const char * const tdmout_sel_texts[] = { + "IN 0", "IN 1", "IN 2", +}; + +static SOC_ENUM_SINGLE_DECL(axg_tdmout_sel_enum, TDMOUT_CTRL1, + TDMOUT_CTRL1_SEL_SHIFT, tdmout_sel_texts); + +static const struct snd_kcontrol_new axg_tdmout_in_mux = + SOC_DAPM_ENUM("Input Source", axg_tdmout_sel_enum); + +static struct snd_soc_dai * +axg_tdmout_get_be(struct snd_soc_dapm_widget *w) +{ + struct snd_soc_dapm_path *p = NULL; + struct snd_soc_dai *be; + + snd_soc_dapm_widget_for_each_sink_path(w, p) { + if (!p->connect) + continue; + + if (p->sink->id == snd_soc_dapm_dai_in) + return (struct snd_soc_dai *)p->sink->priv; + + be = axg_tdmout_get_be(p->sink); + if (be) + return be; + } + + return NULL; +} + +static struct axg_tdm_stream * +axg_tdmout_get_tdm_stream(struct snd_soc_dapm_widget *w) +{ + struct snd_soc_dai *be = axg_tdmout_get_be(w); + + if (!be) + return NULL; + + return be->playback_dma_data; +} + +static void axg_tdmout_enable(struct regmap *map) +{ + /* Apply both reset */ + regmap_update_bits(map, TDMOUT_CTRL0, + TDMOUT_CTRL0_RST_OUT | TDMOUT_CTRL0_RST_IN, 0); + + /* Clear out reset before in reset */ + regmap_update_bits(map, TDMOUT_CTRL0, + TDMOUT_CTRL0_RST_OUT, TDMOUT_CTRL0_RST_OUT); + regmap_update_bits(map, TDMOUT_CTRL0, + TDMOUT_CTRL0_RST_IN, TDMOUT_CTRL0_RST_IN); + + /* Actually enable tdmout */ + regmap_update_bits(map, TDMOUT_CTRL0, + TDMOUT_CTRL0_ENABLE, TDMOUT_CTRL0_ENABLE); +} + +static void axg_tdmout_disable(struct regmap *map) +{ + regmap_update_bits(map, TDMOUT_CTRL0, TDMOUT_CTRL0_ENABLE, 0); +} + +static int axg_tdmout_prepare(struct regmap *map, struct axg_tdm_stream *ts) +{ + unsigned int val = 0; + + /* Set the stream skew */ + switch (ts->iface->fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + case SND_SOC_DAIFMT_DSP_A: + val |= TDMOUT_CTRL0_INIT_BITNUM(1); + break; + + case SND_SOC_DAIFMT_LEFT_J: + case SND_SOC_DAIFMT_RIGHT_J: + case SND_SOC_DAIFMT_DSP_B: + val |= TDMOUT_CTRL0_INIT_BITNUM(2); + break; + + default: + pr_err("Unsupported format: %u\n", + ts->iface->fmt & SND_SOC_DAIFMT_FORMAT_MASK); + return -EINVAL; + } + + /* Set the slot width */ + val |= TDMOUT_CTRL0_BITNUM(ts->iface->slot_width - 1); + + /* Set the slot number */ + val |= TDMOUT_CTRL0_SLOTNUM(ts->iface->slots - 1); + + regmap_update_bits(map, TDMOUT_CTRL0, + TDMOUT_CTRL0_INIT_BITNUM_MASK | + TDMOUT_CTRL0_BITNUM_MASK | + TDMOUT_CTRL0_SLOTNUM_MASK, val); + + /* Set the sample width */ + val = TDMOUT_CTRL1_MSB_POS(ts->width - 1); + + /* FIFO data are arranged in chunks of 64bits */ + switch (ts->physical_width) { + case 8: + /* 8 samples of 8 bits */ + val |= TDMOUT_CTRL1_TYPE(0); + break; + case 16: + /* 4 samples of 16 bits - right justified */ + val |= TDMOUT_CTRL1_TYPE(2); + break; + case 32: + /* 2 samples of 32 bits - right justified */ + val |= TDMOUT_CTRL1_TYPE(4); + break; + default: + pr_err("Unsupported physical width: %u\n", + ts->physical_width); + return -EINVAL; + } + + /* If the sample clock is inverted, invert it back for the formatter */ + if (axg_tdm_lrclk_invert(ts->iface->fmt)) + val |= TDMOUT_CTRL1_WS_INV; + + regmap_update_bits(map, TDMOUT_CTRL1, + (TDMOUT_CTRL1_TYPE_MASK | TDMOUT_CTRL1_MSB_POS_MASK | + TDMOUT_CTRL1_WS_INV), val); + + /* Set static swap mask configuration */ + regmap_write(map, TDMOUT_SWAP, 0x76543210); + + return axg_tdm_formatter_set_channel_masks(map, ts, TDMOUT_MASK0); +} + +static const struct snd_soc_dapm_widget axg_tdmout_dapm_widgets[] = { + SND_SOC_DAPM_AIF_IN("IN 0", NULL, 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_IN("IN 1", NULL, 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_IN("IN 2", NULL, 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_MUX("SRC SEL", SND_SOC_NOPM, 0, 0, &axg_tdmout_in_mux), + SND_SOC_DAPM_PGA_E("ENC", SND_SOC_NOPM, 0, 0, NULL, 0, + axg_tdm_formatter_event, + (SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD)), + SND_SOC_DAPM_AIF_OUT("OUT", NULL, 0, SND_SOC_NOPM, 0, 0), +}; + +static const struct snd_soc_dapm_route axg_tdmout_dapm_routes[] = { + { "SRC SEL", "IN 0", "IN 0" }, + { "SRC SEL", "IN 1", "IN 1" }, + { "SRC SEL", "IN 2", "IN 2" }, + { "ENC", NULL, "SRC SEL" }, + { "OUT", NULL, "ENC" }, +}; + +static const struct snd_soc_component_driver axg_tdmout_component_drv = { + .controls = axg_tdmout_controls, + .num_controls = ARRAY_SIZE(axg_tdmout_controls), + .dapm_widgets = axg_tdmout_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(axg_tdmout_dapm_widgets), + .dapm_routes = axg_tdmout_dapm_routes, + .num_dapm_routes = ARRAY_SIZE(axg_tdmout_dapm_routes), +}; + +static const struct axg_tdm_formatter_ops axg_tdmout_ops = { + .get_stream = axg_tdmout_get_tdm_stream, + .prepare = axg_tdmout_prepare, + .enable = axg_tdmout_enable, + .disable = axg_tdmout_disable, +}; + +static const struct axg_tdm_formatter_driver axg_tdmout_drv = { + .component_drv = &axg_tdmout_component_drv, + .regmap_cfg = &axg_tdmout_regmap_cfg, + .ops = &axg_tdmout_ops, + .invert_sclk = true, +}; + +static const struct of_device_id axg_tdmout_of_match[] = { + { + .compatible = "amlogic,axg-tdmout", + .data = &axg_tdmout_drv, + }, {} +}; +MODULE_DEVICE_TABLE(of, axg_tdmout_of_match); + +static struct platform_driver axg_tdmout_pdrv = { + .probe = axg_tdm_formatter_probe, + .driver = { + .name = "axg-tdmout", + .of_match_table = axg_tdmout_of_match, + }, +}; +module_platform_driver(axg_tdmout_pdrv); + +MODULE_DESCRIPTION("Amlogic AXG TDM output formatter driver"); +MODULE_AUTHOR("Jerome Brunet "); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3 From 13a22e6a98f8b47d61948fcd095d862377b3b143 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Tue, 17 Jul 2018 17:43:01 +0200 Subject: ASoC: meson: add tdm input driver Add Amlogic's axg TDM input driver which take the TDM signal of 4 input lanes and push the decoded audio samples to TODDR fifo Signed-off-by: Jerome Brunet Signed-off-by: Mark Brown --- sound/soc/meson/Kconfig | 8 ++ sound/soc/meson/Makefile | 2 + sound/soc/meson/axg-tdmin.c | 229 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 239 insertions(+) create mode 100644 sound/soc/meson/axg-tdmin.c diff --git a/sound/soc/meson/Kconfig b/sound/soc/meson/Kconfig index 08a522b77749..00d05df67b52 100644 --- a/sound/soc/meson/Kconfig +++ b/sound/soc/meson/Kconfig @@ -27,6 +27,14 @@ config SND_MESON_AXG_TDM_INTERFACE tristate select SND_MESON_AXG_TDM_FORMATTER +config SND_MESON_AXG_TDMIN + tristate "Amlogic AXG TDM Input Support" + select SND_MESON_AXG_TDM_FORMATTER + select SND_MESON_AXG_TDM_INTERFACE + help + Select Y or M to add support for TDM input formatter embedded + in the Amlogic AXG SoC family + config SND_MESON_AXG_TDMOUT tristate "Amlogic AXG TDM Output Support" select SND_MESON_AXG_TDM_FORMATTER diff --git a/sound/soc/meson/Makefile b/sound/soc/meson/Makefile index a665c6b76a95..f62833fb44d8 100644 --- a/sound/soc/meson/Makefile +++ b/sound/soc/meson/Makefile @@ -5,6 +5,7 @@ snd-soc-meson-axg-frddr-objs := axg-frddr.o snd-soc-meson-axg-toddr-objs := axg-toddr.o snd-soc-meson-axg-tdm-formatter-objs := axg-tdm-formatter.o snd-soc-meson-axg-tdm-interface-objs := axg-tdm-interface.o +snd-soc-meson-axg-tdmin-objs := axg-tdmin.o snd-soc-meson-axg-tdmout-objs := axg-tdmout.o snd-soc-meson-axg-spdifout-objs := axg-spdifout.o @@ -13,5 +14,6 @@ obj-$(CONFIG_SND_MESON_AXG_FRDDR) += snd-soc-meson-axg-frddr.o obj-$(CONFIG_SND_MESON_AXG_TODDR) += snd-soc-meson-axg-toddr.o obj-$(CONFIG_SND_MESON_AXG_TDM_FORMATTER) += snd-soc-meson-axg-tdm-formatter.o obj-$(CONFIG_SND_MESON_AXG_TDM_INTERFACE) += snd-soc-meson-axg-tdm-interface.o +obj-$(CONFIG_SND_MESON_AXG_TDMIN) += snd-soc-meson-axg-tdmin.o obj-$(CONFIG_SND_MESON_AXG_TDMOUT) += snd-soc-meson-axg-tdmout.o obj-$(CONFIG_SND_MESON_AXG_SPDIFOUT) += snd-soc-meson-axg-spdifout.o diff --git a/sound/soc/meson/axg-tdmin.c b/sound/soc/meson/axg-tdmin.c new file mode 100644 index 000000000000..bbac44c81688 --- /dev/null +++ b/sound/soc/meson/axg-tdmin.c @@ -0,0 +1,229 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright (c) 2018 BayLibre, SAS. +// Author: Jerome Brunet + +#include +#include +#include +#include +#include + +#include "axg-tdm-formatter.h" + +#define TDMIN_CTRL 0x00 +#define TDMIN_CTRL_ENABLE BIT(31) +#define TDMIN_CTRL_I2S_MODE BIT(30) +#define TDMIN_CTRL_RST_OUT BIT(29) +#define TDMIN_CTRL_RST_IN BIT(28) +#define TDMIN_CTRL_WS_INV BIT(25) +#define TDMIN_CTRL_SEL_SHIFT 20 +#define TDMIN_CTRL_IN_BIT_SKEW_MASK GENMASK(18, 16) +#define TDMIN_CTRL_IN_BIT_SKEW(x) ((x) << 16) +#define TDMIN_CTRL_LSB_FIRST BIT(5) +#define TDMIN_CTRL_BITNUM_MASK GENMASK(4, 0) +#define TDMIN_CTRL_BITNUM(x) ((x) << 0) +#define TDMIN_SWAP 0x04 +#define TDMIN_MASK0 0x08 +#define TDMIN_MASK1 0x0c +#define TDMIN_MASK2 0x10 +#define TDMIN_MASK3 0x14 +#define TDMIN_STAT 0x18 +#define TDMIN_MUTE_VAL 0x1c +#define TDMIN_MUTE0 0x20 +#define TDMIN_MUTE1 0x24 +#define TDMIN_MUTE2 0x28 +#define TDMIN_MUTE3 0x2c + +static const struct regmap_config axg_tdmin_regmap_cfg = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, + .max_register = TDMIN_MUTE3, +}; + +static const char * const axg_tdmin_sel_texts[] = { + "IN 0", "IN 1", "IN 2", "IN 3", "IN 4", "IN 5", +}; + +/* Change to special mux control to reset dapm */ +static SOC_ENUM_SINGLE_DECL(axg_tdmin_sel_enum, TDMIN_CTRL, + TDMIN_CTRL_SEL_SHIFT, axg_tdmin_sel_texts); + +static const struct snd_kcontrol_new axg_tdmin_in_mux = + SOC_DAPM_ENUM("Input Source", axg_tdmin_sel_enum); + +static struct snd_soc_dai * +axg_tdmin_get_be(struct snd_soc_dapm_widget *w) +{ + struct snd_soc_dapm_path *p = NULL; + struct snd_soc_dai *be; + + snd_soc_dapm_widget_for_each_source_path(w, p) { + if (!p->connect) + continue; + + if (p->source->id == snd_soc_dapm_dai_out) + return (struct snd_soc_dai *)p->source->priv; + + be = axg_tdmin_get_be(p->source); + if (be) + return be; + } + + return NULL; +} + +static struct axg_tdm_stream * +axg_tdmin_get_tdm_stream(struct snd_soc_dapm_widget *w) +{ + struct snd_soc_dai *be = axg_tdmin_get_be(w); + + if (!be) + return NULL; + + return be->capture_dma_data; +} + +static void axg_tdmin_enable(struct regmap *map) +{ + /* Apply both reset */ + regmap_update_bits(map, TDMIN_CTRL, + TDMIN_CTRL_RST_OUT | TDMIN_CTRL_RST_IN, 0); + + /* Clear out reset before in reset */ + regmap_update_bits(map, TDMIN_CTRL, + TDMIN_CTRL_RST_OUT, TDMIN_CTRL_RST_OUT); + regmap_update_bits(map, TDMIN_CTRL, + TDMIN_CTRL_RST_IN, TDMIN_CTRL_RST_IN); + + /* Actually enable tdmin */ + regmap_update_bits(map, TDMIN_CTRL, + TDMIN_CTRL_ENABLE, TDMIN_CTRL_ENABLE); +} + +static void axg_tdmin_disable(struct regmap *map) +{ + regmap_update_bits(map, TDMIN_CTRL, TDMIN_CTRL_ENABLE, 0); +} + +static int axg_tdmin_prepare(struct regmap *map, struct axg_tdm_stream *ts) +{ + unsigned int val = 0; + + /* Set stream skew */ + switch (ts->iface->fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + case SND_SOC_DAIFMT_DSP_A: + val |= TDMIN_CTRL_IN_BIT_SKEW(3); + break; + + case SND_SOC_DAIFMT_LEFT_J: + case SND_SOC_DAIFMT_RIGHT_J: + case SND_SOC_DAIFMT_DSP_B: + val = TDMIN_CTRL_IN_BIT_SKEW(2); + break; + + default: + pr_err("Unsupported format: %u\n", + ts->iface->fmt & SND_SOC_DAIFMT_FORMAT_MASK); + return -EINVAL; + } + + /* Set stream format mode */ + switch (ts->iface->fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + case SND_SOC_DAIFMT_LEFT_J: + case SND_SOC_DAIFMT_RIGHT_J: + val |= TDMIN_CTRL_I2S_MODE; + break; + } + + /* If the sample clock is inverted, invert it back for the formatter */ + if (axg_tdm_lrclk_invert(ts->iface->fmt)) + val |= TDMIN_CTRL_WS_INV; + + /* Set the slot width */ + val |= TDMIN_CTRL_BITNUM(ts->iface->slot_width - 1); + + /* + * The following also reset LSB_FIRST which result in the formatter + * placing the first bit received at bit 31 + */ + regmap_update_bits(map, TDMIN_CTRL, + (TDMIN_CTRL_IN_BIT_SKEW_MASK | TDMIN_CTRL_WS_INV | + TDMIN_CTRL_I2S_MODE | TDMIN_CTRL_LSB_FIRST | + TDMIN_CTRL_BITNUM_MASK), val); + + /* Set static swap mask configuration */ + regmap_write(map, TDMIN_SWAP, 0x76543210); + + return axg_tdm_formatter_set_channel_masks(map, ts, TDMIN_MASK0); +} + +static const struct snd_soc_dapm_widget axg_tdmin_dapm_widgets[] = { + SND_SOC_DAPM_AIF_IN("IN 0", NULL, 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_IN("IN 1", NULL, 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_IN("IN 2", NULL, 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_IN("IN 3", NULL, 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_IN("IN 4", NULL, 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_IN("IN 5", NULL, 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_MUX("SRC SEL", SND_SOC_NOPM, 0, 0, &axg_tdmin_in_mux), + SND_SOC_DAPM_PGA_E("DEC", SND_SOC_NOPM, 0, 0, NULL, 0, + axg_tdm_formatter_event, + (SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD)), + SND_SOC_DAPM_AIF_OUT("OUT", NULL, 0, SND_SOC_NOPM, 0, 0), +}; + +static const struct snd_soc_dapm_route axg_tdmin_dapm_routes[] = { + { "SRC SEL", "IN 0", "IN 0" }, + { "SRC SEL", "IN 1", "IN 1" }, + { "SRC SEL", "IN 2", "IN 2" }, + { "SRC SEL", "IN 3", "IN 3" }, + { "SRC SEL", "IN 4", "IN 4" }, + { "SRC SEL", "IN 5", "IN 5" }, + { "DEC", NULL, "SRC SEL" }, + { "OUT", NULL, "DEC" }, +}; + +static const struct snd_soc_component_driver axg_tdmin_component_drv = { + .dapm_widgets = axg_tdmin_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(axg_tdmin_dapm_widgets), + .dapm_routes = axg_tdmin_dapm_routes, + .num_dapm_routes = ARRAY_SIZE(axg_tdmin_dapm_routes), +}; + +static const struct axg_tdm_formatter_ops axg_tdmin_ops = { + .get_stream = axg_tdmin_get_tdm_stream, + .prepare = axg_tdmin_prepare, + .enable = axg_tdmin_enable, + .disable = axg_tdmin_disable, +}; + +static const struct axg_tdm_formatter_driver axg_tdmin_drv = { + .component_drv = &axg_tdmin_component_drv, + .regmap_cfg = &axg_tdmin_regmap_cfg, + .ops = &axg_tdmin_ops, + .invert_sclk = false, +}; + +static const struct of_device_id axg_tdmin_of_match[] = { + { + .compatible = "amlogic,axg-tdmin", + .data = &axg_tdmin_drv, + }, {} +}; +MODULE_DEVICE_TABLE(of, axg_tdmin_of_match); + +static struct platform_driver axg_tdmin_pdrv = { + .probe = axg_tdm_formatter_probe, + .driver = { + .name = "axg-tdmin", + .of_match_table = axg_tdmin_of_match, + }, +}; +module_platform_driver(axg_tdmin_pdrv); + +MODULE_DESCRIPTION("Amlogic AXG TDM input formatter driver"); +MODULE_AUTHOR("Jerome Brunet "); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3 From cbdfab3b675f4c34258b0ec9e4707de44e1f6989 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Tue, 17 Jul 2018 17:43:02 +0200 Subject: ASoC: export snd_soc_of_get_slot_mask Amlogic's axg card driver can't use snd_soc_of_parse_tdm_slot() directly because it needs to handle 4 mask for each direction. Yet the parsing of each mask is the same, so export snd_soc_of_get_slot_mask() to reuse the the existing code. Signed-off-by: Jerome Brunet Signed-off-by: Mark Brown --- include/sound/soc.h | 3 +++ sound/soc/soc-core.c | 7 ++++--- 2 files changed, 7 insertions(+), 3 deletions(-) diff --git a/include/sound/soc.h b/include/sound/soc.h index a23ecdf3eff1..ace474e8649e 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -1433,6 +1433,9 @@ int snd_soc_of_parse_card_name(struct snd_soc_card *card, const char *propname); int snd_soc_of_parse_audio_simple_widgets(struct snd_soc_card *card, const char *propname); +int snd_soc_of_get_slot_mask(struct device_node *np, + const char *prop_name, + unsigned int *mask); int snd_soc_of_parse_tdm_slot(struct device_node *np, unsigned int *tx_mask, unsigned int *rx_mask, diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 08e189485009..ad5b0ef16d82 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -3428,9 +3428,9 @@ int snd_soc_of_parse_audio_simple_widgets(struct snd_soc_card *card, } EXPORT_SYMBOL_GPL(snd_soc_of_parse_audio_simple_widgets); -static int snd_soc_of_get_slot_mask(struct device_node *np, - const char *prop_name, - unsigned int *mask) +int snd_soc_of_get_slot_mask(struct device_node *np, + const char *prop_name, + unsigned int *mask) { u32 val; const __be32 *of_slot_mask = of_get_property(np, prop_name, &val); @@ -3445,6 +3445,7 @@ static int snd_soc_of_get_slot_mask(struct device_node *np, return val; } +EXPORT_SYMBOL_GPL(snd_soc_of_get_slot_mask); int snd_soc_of_parse_tdm_slot(struct device_node *np, unsigned int *tx_mask, -- cgit v1.2.3 From 2a05c71ea17b09c88a212e8fa6be1ccddd4613ab Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Tue, 17 Jul 2018 17:43:03 +0200 Subject: ASoC: meson: add axg sound card DT bindings documentation Add the DT bindings documentation for axg sound card Signed-off-by: Jerome Brunet Signed-off-by: Mark Brown --- .../bindings/sound/amlogic,axg-sound-card.txt | 124 +++++++++++++++++++++ 1 file changed, 124 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.txt diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.txt new file mode 100644 index 000000000000..39e005da0407 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.txt @@ -0,0 +1,124 @@ +Amlogic AXG sound card: + +Required properties: + +- compatible: "amlogic,axg-sound-card" +- amlogic,name : User specified audio sound card name, one string + +Optional properties: + +- amlogic,aux-devs : List of phandles pointing to auxiliary devices +- amlogic,widgets : Please refer to widgets.txt. +- amlogic,routing : A list of the connections between audio components. + +Subnodes: + +- amlogic,dai-link: Container for dai-link level properties and the + CODEC sub-nodes. There should be at least one (and + probably) subnode of this type. + +Required dai-link properties: + +- sound-dai: phandle and port of the CPU DAI. + +Required TDM Backend dai-link properties: +- dai-format : CPU/CODEC common audio format + +Optional TDM Backend dai-link properties: +- dai-tdm-slot-rx-mask-{0,1,2,3}: Receive direction slot masks +- dai-tdm-slot-tx-mask-{0,1,2,3}: Transmit direction slot masks + When omitted, mask is assumed to have to no + slots. A valid must have at one slot, so at + least one these mask should be provided with + an enabled slot. +- dai-tdm-slot-num : Please refer to tdm-slot.txt. + If omitted, slot number is set to accommodate the largest + mask provided. +- dai-tdm-slot-width : Please refer to tdm-slot.txt. default to 32 if omitted. +- mclk-fs : Multiplication factor between stream rate and mclk + +Backend dai-link subnodes: + +- codec: dai-link representing backend links should have at least one subnode. + One subnode for each codec of the dai-link. + dai-link representing frontend links have no codec, therefore have no + subnodes + +Required codec subnodes properties: + +- sound-dai: phandle and port of the CODEC DAI. + +Optional codec subnodes properties: + +- dai-tdm-slot-tx-mask : Please refer to tdm-slot.txt. +- dai-tdm-slot-rx-mask : Please refer to tdm-slot.txt. + +Example: + +sound { + compatible = "amlogic,axg-sound-card"; + amlogic,name = "AXG-S420"; + amlogic,aux-devs = <&tdmin_a>, <&tdmout_c>; + amlogic,widgets = "Line", "Lineout", + "Line", "Linein", + "Speaker", "Speaker1 Left", + "Speaker", "Speaker1 Right"; + "Speaker", "Speaker2 Left", + "Speaker", "Speaker2 Right"; + amlogic,routing = "TDMOUT_C IN 0", "FRDDR_A OUT 2", + "SPDIFOUT IN 0", "FRDDR_A OUT 3", + "TDM_C Playback", "TDMOUT_C OUT", + "TDMIN_A IN 2", "TDM_C Capture", + "TDMIN_A IN 5", "TDM_C Loopback", + "TODDR_A IN 0", "TDMIN_A OUT", + "Lineout", "Lineout AOUTL", + "Lineout", "Lineout AOUTR", + "Speaker1 Left", "SPK1 OUT_A", + "Speaker2 Left", "SPK2 OUT_A", + "Speaker1 Right", "SPK1 OUT_B", + "Speaker2 Right", "SPK2 OUT_B", + "Linein AINL", "Linein", + "Linein AINR", "Linein"; + + amlogic,dai-link@0 { + sound-dai = <&frddr_a>; + }; + + amlogic,dai-link@1 { + sound-dai = <&toddr_a>; + }; + + amlogic,dai-link@2 { + sound-dai = <&tdmif_c>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + dai-tdm-slot-rx-mask-1 = <1 1>; + mclk-fs = <256>; + + codec@0 { + sound-dai = <&lineout>; + }; + + codec@1 { + sound-dai = <&speaker_amp1>; + }; + + codec@2 { + sound-dai = <&speaker_amp2>; + }; + + codec@3 { + sound-dai = <&linein>; + }; + + }; + + amlogic,dai-link@4 { + sound-dai = <&spdifout>; + + codec { + sound-dai = <&spdif_dit>; + }; + }; +}; -- cgit v1.2.3 From 7864a79f37b55769b817d5e6c5ae0ca4bfdba93b Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Tue, 17 Jul 2018 17:43:04 +0200 Subject: ASoC: meson: add axg sound card support Add the axg sound card to handle the specifities of the axg audio sub system. This card is required to: * setup the dpcm links specific to the AXG (with a cpu sound dai) * handle the 4 lanes masks of the tdm interfaces * add the loopback link when a tdm pad interface has a playback stream * handle multi-codec links Signed-off-by: Jerome Brunet Signed-off-by: Mark Brown --- sound/soc/meson/Kconfig | 11 + sound/soc/meson/Makefile | 2 + sound/soc/meson/axg-card.c | 671 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 684 insertions(+) create mode 100644 sound/soc/meson/axg-card.c diff --git a/sound/soc/meson/Kconfig b/sound/soc/meson/Kconfig index 00d05df67b52..4cf93c05a982 100644 --- a/sound/soc/meson/Kconfig +++ b/sound/soc/meson/Kconfig @@ -43,6 +43,17 @@ config SND_MESON_AXG_TDMOUT Select Y or M to add support for TDM output formatter embedded in the Amlogic AXG SoC family +config SND_MESON_AXG_SOUND_CARD + tristate "Amlogic AXG Sound Card Support" + select SND_MESON_AXG_TDM_INTERFACE + imply SND_MESON_AXG_FRDDR + imply SND_MESON_AXG_TODDR + imply SND_MESON_AXG_TDMIN + imply SND_MESON_AXG_TDMOUT + imply SND_MESON_AXG_SPDIFOUT + help + Select Y or M to add support for the AXG SoC sound card + config SND_MESON_AXG_SPDIFOUT tristate "Amlogic AXG SPDIF Output Support" imply SND_SOC_SPDIF diff --git a/sound/soc/meson/Makefile b/sound/soc/meson/Makefile index f62833fb44d8..c5e003b093db 100644 --- a/sound/soc/meson/Makefile +++ b/sound/soc/meson/Makefile @@ -7,6 +7,7 @@ snd-soc-meson-axg-tdm-formatter-objs := axg-tdm-formatter.o snd-soc-meson-axg-tdm-interface-objs := axg-tdm-interface.o snd-soc-meson-axg-tdmin-objs := axg-tdmin.o snd-soc-meson-axg-tdmout-objs := axg-tdmout.o +snd-soc-meson-axg-sound-card-objs := axg-card.o snd-soc-meson-axg-spdifout-objs := axg-spdifout.o obj-$(CONFIG_SND_MESON_AXG_FIFO) += snd-soc-meson-axg-fifo.o @@ -16,4 +17,5 @@ obj-$(CONFIG_SND_MESON_AXG_TDM_FORMATTER) += snd-soc-meson-axg-tdm-formatter.o obj-$(CONFIG_SND_MESON_AXG_TDM_INTERFACE) += snd-soc-meson-axg-tdm-interface.o obj-$(CONFIG_SND_MESON_AXG_TDMIN) += snd-soc-meson-axg-tdmin.o obj-$(CONFIG_SND_MESON_AXG_TDMOUT) += snd-soc-meson-axg-tdmout.o +obj-$(CONFIG_SND_MESON_AXG_SOUND_CARD) += snd-soc-meson-axg-sound-card.o obj-$(CONFIG_SND_MESON_AXG_SPDIFOUT) += snd-soc-meson-axg-spdifout.o diff --git a/sound/soc/meson/axg-card.c b/sound/soc/meson/axg-card.c new file mode 100644 index 000000000000..d6d1081d94ad --- /dev/null +++ b/sound/soc/meson/axg-card.c @@ -0,0 +1,671 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright (c) 2018 BayLibre, SAS. +// Author: Jerome Brunet + +#include +#include +#include +#include + +#include "axg-tdm.h" + +struct axg_card { + struct snd_soc_card card; + void **link_data; +}; + +struct axg_dai_link_tdm_mask { + u32 tx; + u32 rx; +}; + +struct axg_dai_link_tdm_data { + unsigned int mclk_fs; + unsigned int slots; + unsigned int slot_width; + u32 *tx_mask; + u32 *rx_mask; + struct axg_dai_link_tdm_mask *codec_masks; +}; + +#define PREFIX "amlogic," + +static int axg_card_reallocate_links(struct axg_card *priv, + unsigned int num_links) +{ + struct snd_soc_dai_link *links; + void **ldata; + + links = krealloc(priv->card.dai_link, + num_links * sizeof(*priv->card.dai_link), + GFP_KERNEL | __GFP_ZERO); + ldata = krealloc(priv->link_data, + num_links * sizeof(*priv->link_data), + GFP_KERNEL | __GFP_ZERO); + + if (!links || !ldata) { + dev_err(priv->card.dev, "failed to allocate links\n"); + return -ENOMEM; + } + + priv->card.dai_link = links; + priv->link_data = ldata; + priv->card.num_links = num_links; + return 0; +} + +static int axg_card_parse_dai(struct snd_soc_card *card, + struct device_node *node, + struct device_node **dai_of_node, + const char **dai_name) +{ + struct of_phandle_args args; + int ret; + + if (!dai_name || !dai_of_node || !node) + return -EINVAL; + + ret = of_parse_phandle_with_args(node, "sound-dai", + "#sound-dai-cells", 0, &args); + if (ret) { + if (ret != -EPROBE_DEFER) + dev_err(card->dev, "can't parse dai %d\n", ret); + return ret; + } + *dai_of_node = args.np; + + return snd_soc_get_dai_name(&args, dai_name); +} + +static int axg_card_set_link_name(struct snd_soc_card *card, + struct snd_soc_dai_link *link, + const char *prefix) +{ + char *name = devm_kasprintf(card->dev, GFP_KERNEL, "%s.%s", + prefix, link->cpu_of_node->full_name); + if (!name) + return -ENOMEM; + + link->name = name; + link->stream_name = name; + + return 0; +} + +static void axg_card_clean_references(struct axg_card *priv) +{ + struct snd_soc_card *card = &priv->card; + struct snd_soc_dai_link *link; + int i, j; + + if (card->dai_link) { + for (i = 0; i < card->num_links; i++) { + link = &card->dai_link[i]; + of_node_put(link->cpu_of_node); + for (j = 0; j < link->num_codecs; j++) + of_node_put(link->codecs[j].of_node); + } + } + + if (card->aux_dev) { + for (i = 0; i < card->num_aux_devs; i++) + of_node_put(card->aux_dev[i].codec_of_node); + } + + kfree(card->dai_link); + kfree(priv->link_data); +} + +static int axg_card_add_aux_devices(struct snd_soc_card *card) +{ + struct device_node *node = card->dev->of_node; + struct snd_soc_aux_dev *aux; + int num, i; + + num = of_count_phandle_with_args(node, PREFIX "aux-devs", NULL); + if (num == -ENOENT) { + /* + * It is ok to have no auxiliary devices but for this card it + * is a strange situtation. Let's warn the about it. + */ + dev_warn(card->dev, "card has no auxiliary devices\n"); + return 0; + } else if (num < 0) { + dev_err(card->dev, "error getting auxiliary devices: %d\n", + num); + return num; + } + + aux = devm_kcalloc(card->dev, num, sizeof(*aux), GFP_KERNEL); + if (!aux) + return -ENOMEM; + card->aux_dev = aux; + card->num_aux_devs = num; + + for (i = 0; i < card->num_aux_devs; i++, aux++) { + aux->codec_of_node = of_parse_phandle(node, + PREFIX "aux-devs", i); + if (!aux->codec_of_node) + return -EINVAL; + } + + return 0; +} + +static int axg_card_tdm_be_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct axg_card *priv = snd_soc_card_get_drvdata(rtd->card); + struct axg_dai_link_tdm_data *be = + (struct axg_dai_link_tdm_data *)priv->link_data[rtd->num]; + struct snd_soc_dai *codec_dai; + unsigned int mclk; + int ret, i; + + if (be->mclk_fs) { + mclk = params_rate(params) * be->mclk_fs; + + for (i = 0; i < rtd->num_codecs; i++) { + codec_dai = rtd->codec_dais[i]; + ret = snd_soc_dai_set_sysclk(codec_dai, 0, mclk, + SND_SOC_CLOCK_IN); + if (ret && ret != -ENOTSUPP) + return ret; + } + + ret = snd_soc_dai_set_sysclk(rtd->cpu_dai, 0, mclk, + SND_SOC_CLOCK_OUT); + if (ret && ret != -ENOTSUPP) + return ret; + } + + return 0; +} + +static const struct snd_soc_ops axg_card_tdm_be_ops = { + .hw_params = axg_card_tdm_be_hw_params, +}; + +static int axg_card_tdm_dai_init(struct snd_soc_pcm_runtime *rtd) +{ + struct axg_card *priv = snd_soc_card_get_drvdata(rtd->card); + struct axg_dai_link_tdm_data *be = + (struct axg_dai_link_tdm_data *)priv->link_data[rtd->num]; + struct snd_soc_dai *codec_dai; + int ret, i; + + for (i = 0; i < rtd->num_codecs; i++) { + codec_dai = rtd->codec_dais[i]; + ret = snd_soc_dai_set_tdm_slot(codec_dai, + be->codec_masks[i].tx, + be->codec_masks[i].rx, + be->slots, be->slot_width); + if (ret && ret != -ENOTSUPP) { + dev_err(codec_dai->dev, + "setting tdm link slots failed\n"); + return ret; + } + } + + ret = axg_tdm_set_tdm_slots(rtd->cpu_dai, be->tx_mask, be->rx_mask, + be->slots, be->slot_width); + if (ret) { + dev_err(rtd->cpu_dai->dev, "setting tdm link slots failed\n"); + return ret; + } + + return 0; +} + +static int axg_card_tdm_dai_lb_init(struct snd_soc_pcm_runtime *rtd) +{ + struct axg_card *priv = snd_soc_card_get_drvdata(rtd->card); + struct axg_dai_link_tdm_data *be = + (struct axg_dai_link_tdm_data *)priv->link_data[rtd->num]; + int ret; + + /* The loopback rx_mask is the pad tx_mask */ + ret = axg_tdm_set_tdm_slots(rtd->cpu_dai, NULL, be->tx_mask, + be->slots, be->slot_width); + if (ret) { + dev_err(rtd->cpu_dai->dev, "setting tdm link slots failed\n"); + return ret; + } + + return 0; +} + +static int axg_card_add_tdm_loopback(struct snd_soc_card *card, + int *index) +{ + struct axg_card *priv = snd_soc_card_get_drvdata(card); + struct snd_soc_dai_link *pad = &card->dai_link[*index]; + struct snd_soc_dai_link *lb; + int ret; + + /* extend links */ + ret = axg_card_reallocate_links(priv, card->num_links + 1); + if (ret) + return ret; + + lb = &card->dai_link[*index + 1]; + + lb->name = kasprintf(GFP_KERNEL, "%s-lb", pad->name); + if (!lb->name) + return -ENOMEM; + + lb->stream_name = lb->name; + lb->cpu_of_node = pad->cpu_of_node; + lb->cpu_dai_name = "TDM Loopback"; + lb->codec_name = "snd-soc-dummy"; + lb->codec_dai_name = "snd-soc-dummy-dai"; + lb->dpcm_capture = 1; + lb->no_pcm = 1; + lb->ops = &axg_card_tdm_be_ops; + lb->init = axg_card_tdm_dai_lb_init; + + /* Provide the same link data to the loopback */ + priv->link_data[*index + 1] = priv->link_data[*index]; + + /* + * axg_card_clean_references() will iterate over this link, + * make sure the node count is balanced + */ + of_node_get(lb->cpu_of_node); + + /* Let add_links continue where it should */ + *index += 1; + + return 0; +} + +static unsigned int axg_card_parse_daifmt(struct device_node *node, + struct device_node *cpu_node) +{ + struct device_node *bitclkmaster = NULL; + struct device_node *framemaster = NULL; + unsigned int daifmt; + + daifmt = snd_soc_of_parse_daifmt(node, PREFIX, + &bitclkmaster, &framemaster); + daifmt &= ~SND_SOC_DAIFMT_MASTER_MASK; + + /* If no master is provided, default to cpu master */ + if (!bitclkmaster || bitclkmaster == cpu_node) { + daifmt |= (!framemaster || framemaster == cpu_node) ? + SND_SOC_DAIFMT_CBS_CFS : SND_SOC_DAIFMT_CBS_CFM; + } else { + daifmt |= (!framemaster || framemaster == cpu_node) ? + SND_SOC_DAIFMT_CBM_CFS : SND_SOC_DAIFMT_CBM_CFM; + } + + of_node_put(bitclkmaster); + of_node_put(framemaster); + + return daifmt; +} + +static int axg_card_parse_cpu_tdm_slots(struct snd_soc_card *card, + struct snd_soc_dai_link *link, + struct device_node *node, + struct axg_dai_link_tdm_data *be) +{ + char propname[32]; + u32 tx, rx; + int i; + + be->tx_mask = devm_kcalloc(card->dev, AXG_TDM_NUM_LANES, + sizeof(*be->tx_mask), GFP_KERNEL); + be->rx_mask = devm_kcalloc(card->dev, AXG_TDM_NUM_LANES, + sizeof(*be->rx_mask), GFP_KERNEL); + if (!be->tx_mask || !be->rx_mask) + return -ENOMEM; + + for (i = 0, tx = 0; i < AXG_TDM_NUM_LANES; i++) { + snprintf(propname, 32, "dai-tdm-slot-tx-mask-%d", i); + snd_soc_of_get_slot_mask(node, propname, &be->tx_mask[i]); + tx = max(tx, be->tx_mask[i]); + } + + /* Disable playback is the interface has no tx slots */ + if (!tx) + link->dpcm_playback = 0; + + for (i = 0, rx = 0; i < AXG_TDM_NUM_LANES; i++) { + snprintf(propname, 32, "dai-tdm-slot-rx-mask-%d", i); + snd_soc_of_get_slot_mask(node, propname, &be->rx_mask[i]); + rx = max(rx, be->rx_mask[i]); + } + + /* Disable capture is the interface has no rx slots */ + if (!rx) + link->dpcm_capture = 0; + + /* ... but the interface should at least have one of them */ + if (!tx && !rx) { + dev_err(card->dev, "tdm link has no cpu slots\n"); + return -EINVAL; + } + + of_property_read_u32(node, "dai-tdm-slot-num", &be->slots); + if (!be->slots) { + /* + * If the slot number is not provided, set it such as it + * accommodates the largest mask + */ + be->slots = fls(max(tx, rx)); + } else if (be->slots < fls(max(tx, rx)) || be->slots > 32) { + /* + * Error if the slots can't accommodate the largest mask or + * if it is just too big + */ + dev_err(card->dev, "bad slot number\n"); + return -EINVAL; + } + + of_property_read_u32(node, "dai-tdm-slot-width", &be->slot_width); + + return 0; +} + +static int axg_card_parse_codecs_masks(struct snd_soc_card *card, + struct snd_soc_dai_link *link, + struct device_node *node, + struct axg_dai_link_tdm_data *be) +{ + struct axg_dai_link_tdm_mask *codec_mask; + struct device_node *np; + + codec_mask = devm_kcalloc(card->dev, link->num_codecs, + sizeof(*codec_mask), GFP_KERNEL); + if (!codec_mask) + return -ENOMEM; + + be->codec_masks = codec_mask; + + for_each_child_of_node(node, np) { + snd_soc_of_get_slot_mask(np, "dai-tdm-slot-rx-mask", + &codec_mask->rx); + snd_soc_of_get_slot_mask(np, "dai-tdm-slot-tx-mask", + &codec_mask->tx); + + codec_mask++; + } + + return 0; +} + +static int axg_card_parse_tdm(struct snd_soc_card *card, + struct device_node *node, + int *index) +{ + struct axg_card *priv = snd_soc_card_get_drvdata(card); + struct snd_soc_dai_link *link = &card->dai_link[*index]; + struct axg_dai_link_tdm_data *be; + int ret; + + /* Allocate tdm link parameters */ + be = devm_kzalloc(card->dev, sizeof(*be), GFP_KERNEL); + if (!be) + return -ENOMEM; + priv->link_data[*index] = be; + + /* Setup tdm link */ + link->ops = &axg_card_tdm_be_ops; + link->init = axg_card_tdm_dai_init; + link->dai_fmt = axg_card_parse_daifmt(node, link->cpu_of_node); + + of_property_read_u32(node, "mclk-fs", &be->mclk_fs); + + ret = axg_card_parse_cpu_tdm_slots(card, link, node, be); + if (ret) { + dev_err(card->dev, "error parsing tdm link slots\n"); + return ret; + } + + ret = axg_card_parse_codecs_masks(card, link, node, be); + if (ret) + return ret; + + /* Add loopback if the pad dai has playback */ + if (link->dpcm_playback) { + ret = axg_card_add_tdm_loopback(card, index); + if (ret) + return ret; + } + + return 0; +} + +static int axg_card_set_be_link(struct snd_soc_card *card, + struct snd_soc_dai_link *link, + struct device_node *node) +{ + struct snd_soc_dai_link_component *codec; + struct device_node *np; + int ret, num_codecs; + + link->no_pcm = 1; + link->dpcm_playback = 1; + link->dpcm_capture = 1; + + num_codecs = of_get_child_count(node); + if (!num_codecs) { + dev_err(card->dev, "be link %s has no codec\n", + node->full_name); + return -EINVAL; + } + + codec = devm_kcalloc(card->dev, num_codecs, sizeof(*codec), GFP_KERNEL); + if (!codec) + return -ENOMEM; + + link->codecs = codec; + link->num_codecs = num_codecs; + + for_each_child_of_node(node, np) { + ret = axg_card_parse_dai(card, np, &codec->of_node, + &codec->dai_name); + if (ret) { + of_node_put(np); + return ret; + } + + codec++; + } + + ret = axg_card_set_link_name(card, link, "be"); + if (ret) + dev_err(card->dev, "error setting %s link name\n", np->name); + + return ret; +} + +static int axg_card_set_fe_link(struct snd_soc_card *card, + struct snd_soc_dai_link *link, + bool is_playback) +{ + link->dynamic = 1; + link->dpcm_merged_format = 1; + link->dpcm_merged_chan = 1; + link->dpcm_merged_rate = 1; + link->codec_dai_name = "snd-soc-dummy-dai"; + link->codec_name = "snd-soc-dummy"; + + if (is_playback) + link->dpcm_playback = 1; + else + link->dpcm_capture = 1; + + return axg_card_set_link_name(card, link, "fe"); +} + +static int axg_card_cpu_is_capture_fe(struct device_node *np) +{ + return of_device_is_compatible(np, PREFIX "axg-toddr"); +} + +static int axg_card_cpu_is_playback_fe(struct device_node *np) +{ + return of_device_is_compatible(np, PREFIX "axg-frddr"); +} + +static int axg_card_cpu_is_tdm_iface(struct device_node *np) +{ + return of_device_is_compatible(np, PREFIX "axg-tdm-iface"); +} + +static int axg_card_add_link(struct snd_soc_card *card, struct device_node *np, + int *index) +{ + struct snd_soc_dai_link *dai_link = &card->dai_link[*index]; + int ret; + + ret = axg_card_parse_dai(card, np, &dai_link->cpu_of_node, + &dai_link->cpu_dai_name); + if (ret) + return ret; + + if (axg_card_cpu_is_playback_fe(dai_link->cpu_of_node)) + ret = axg_card_set_fe_link(card, dai_link, true); + else if (axg_card_cpu_is_capture_fe(dai_link->cpu_of_node)) + ret = axg_card_set_fe_link(card, dai_link, false); + else + ret = axg_card_set_be_link(card, dai_link, np); + + if (ret) + return ret; + + if (axg_card_cpu_is_tdm_iface(dai_link->cpu_of_node)) + ret = axg_card_parse_tdm(card, np, index); + + return ret; +} + +static int axg_card_add_links(struct snd_soc_card *card) +{ + struct axg_card *priv = snd_soc_card_get_drvdata(card); + struct device_node *node = card->dev->of_node; + struct device_node *np; + int num, i, ret; + + num = of_get_child_count(node); + if (!num) { + dev_err(card->dev, "card has no links\n"); + return -EINVAL; + } + + ret = axg_card_reallocate_links(priv, num); + if (ret) + return ret; + + i = 0; + for_each_child_of_node(node, np) { + ret = axg_card_add_link(card, np, &i); + if (ret) { + of_node_put(np); + return ret; + } + + i++; + } + + return 0; +} + +static int axg_card_parse_of_optional(struct snd_soc_card *card, + const char *propname, + int (*func)(struct snd_soc_card *c, + const char *p)) +{ + /* If property is not provided, don't fail ... */ + if (!of_property_read_bool(card->dev->of_node, propname)) + return 0; + + /* ... but do fail if it is provided and the parsing fails */ + return func(card, propname); +} + +static const struct of_device_id axg_card_of_match[] = { + { .compatible = "amlogic,axg-sound-card", }, + {} +}; +MODULE_DEVICE_TABLE(of, axg_card_of_match); + +static int axg_card_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct axg_card *priv; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + platform_set_drvdata(pdev, priv); + snd_soc_card_set_drvdata(&priv->card, priv); + + priv->card.owner = THIS_MODULE; + priv->card.dev = dev; + + ret = snd_soc_of_parse_card_name(&priv->card, PREFIX "name"); + if (ret < 0) + return ret; + + ret = axg_card_parse_of_optional(&priv->card, PREFIX "routing", + snd_soc_of_parse_audio_routing); + if (ret) { + dev_err(dev, "error while parsing routing\n"); + return ret; + } + + ret = axg_card_parse_of_optional(&priv->card, PREFIX "widgets", + snd_soc_of_parse_audio_simple_widgets); + if (ret) { + dev_err(dev, "error while parsing widgets\n"); + return ret; + } + + ret = axg_card_add_links(&priv->card); + if (ret) + goto out_err; + + ret = axg_card_add_aux_devices(&priv->card); + if (ret) + goto out_err; + + ret = devm_snd_soc_register_card(dev, &priv->card); + if (ret) + goto out_err; + + return 0; + +out_err: + axg_card_clean_references(priv); + return ret; +} + +static int axg_card_remove(struct platform_device *pdev) +{ + struct axg_card *priv = platform_get_drvdata(pdev); + + axg_card_clean_references(priv); + + return 0; +} + +static struct platform_driver axg_card_pdrv = { + .probe = axg_card_probe, + .remove = axg_card_remove, + .driver = { + .name = "axg-sound-card", + .of_match_table = axg_card_of_match, + }, +}; +module_platform_driver(axg_card_pdrv); + +MODULE_DESCRIPTION("Amlogic AXG ALSA machine driver"); +MODULE_AUTHOR("Jerome Brunet "); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3 From a8e43c21a8a32a3af4abc605b6ebcab039f28e00 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Mon, 16 Jul 2018 08:24:45 +0200 Subject: ASoC: pxa: remove clock divider and pll setup from zylonite and magician The SSP DAI now handles the clocking setup itself, all it needs is the master clock frequency. Remove the code from Zylonite and Magician platforms. Signed-off-by: Daniel Mack Signed-off-by: Mark Brown --- sound/soc/pxa/magician.c | 106 +---------------------------------------------- sound/soc/pxa/zylonite.c | 9 ---- 2 files changed, 2 insertions(+), 113 deletions(-) diff --git a/sound/soc/pxa/magician.c b/sound/soc/pxa/magician.c index 2fc012b06c43..935a248e5bf6 100644 --- a/sound/soc/pxa/magician.c +++ b/sound/soc/pxa/magician.c @@ -90,95 +90,9 @@ static int magician_playback_hw_params(struct snd_pcm_substream *substream, struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_dai *codec_dai = rtd->codec_dai; struct snd_soc_dai *cpu_dai = rtd->cpu_dai; - unsigned int acps, acds, width; - unsigned int div4 = PXA_SSP_CLK_SCDB_4; + unsigned int width; int ret = 0; - width = snd_pcm_format_physical_width(params_format(params)); - - /* - * rate = SSPSCLK / (2 * width(16 or 32)) - * SSPSCLK = (ACPS / ACDS) / SSPSCLKDIV(div4 or div1) - */ - switch (params_rate(params)) { - case 8000: - /* off by a factor of 2: bug in the PXA27x audio clock? */ - acps = 32842000; - switch (width) { - case 16: - /* 513156 Hz ~= _2_ * 8000 Hz * 32 (+0.23%) */ - acds = PXA_SSP_CLK_AUDIO_DIV_16; - break; - default: /* 32 */ - /* 1026312 Hz ~= _2_ * 8000 Hz * 64 (+0.23%) */ - acds = PXA_SSP_CLK_AUDIO_DIV_8; - } - break; - case 11025: - acps = 5622000; - switch (width) { - case 16: - /* 351375 Hz ~= 11025 Hz * 32 (-0.41%) */ - acds = PXA_SSP_CLK_AUDIO_DIV_4; - break; - default: /* 32 */ - /* 702750 Hz ~= 11025 Hz * 64 (-0.41%) */ - acds = PXA_SSP_CLK_AUDIO_DIV_2; - } - break; - case 22050: - acps = 5622000; - switch (width) { - case 16: - /* 702750 Hz ~= 22050 Hz * 32 (-0.41%) */ - acds = PXA_SSP_CLK_AUDIO_DIV_2; - break; - default: /* 32 */ - /* 1405500 Hz ~= 22050 Hz * 64 (-0.41%) */ - acds = PXA_SSP_CLK_AUDIO_DIV_1; - } - break; - case 44100: - acps = 5622000; - switch (width) { - case 16: - /* 1405500 Hz ~= 44100 Hz * 32 (-0.41%) */ - acds = PXA_SSP_CLK_AUDIO_DIV_2; - break; - default: /* 32 */ - /* 2811000 Hz ~= 44100 Hz * 64 (-0.41%) */ - acds = PXA_SSP_CLK_AUDIO_DIV_1; - } - break; - case 48000: - acps = 12235000; - switch (width) { - case 16: - /* 1529375 Hz ~= 48000 Hz * 32 (-0.44%) */ - acds = PXA_SSP_CLK_AUDIO_DIV_2; - break; - default: /* 32 */ - /* 3058750 Hz ~= 48000 Hz * 64 (-0.44%) */ - acds = PXA_SSP_CLK_AUDIO_DIV_1; - } - break; - case 96000: - default: - acps = 12235000; - switch (width) { - case 16: - /* 3058750 Hz ~= 96000 Hz * 32 (-0.44%) */ - acds = PXA_SSP_CLK_AUDIO_DIV_1; - break; - default: /* 32 */ - /* 6117500 Hz ~= 96000 Hz * 64 (-0.44%) */ - acds = PXA_SSP_CLK_AUDIO_DIV_2; - div4 = PXA_SSP_CLK_SCDB_1; - break; - } - break; - } - /* set codec DAI configuration */ ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_MSB | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS); @@ -191,6 +105,7 @@ static int magician_playback_hw_params(struct snd_pcm_substream *substream, if (ret < 0) return ret; + width = snd_pcm_format_physical_width(params_format(params)); ret = snd_soc_dai_set_tdm_slot(cpu_dai, 1, 0, 1, width); if (ret < 0) return ret; @@ -201,23 +116,6 @@ static int magician_playback_hw_params(struct snd_pcm_substream *substream, if (ret < 0) return ret; - /* set the SSP audio system clock ACDS divider */ - ret = snd_soc_dai_set_clkdiv(cpu_dai, - PXA_SSP_AUDIO_DIV_ACDS, acds); - if (ret < 0) - return ret; - - /* set the SSP audio system clock SCDB divider4 */ - ret = snd_soc_dai_set_clkdiv(cpu_dai, - PXA_SSP_AUDIO_DIV_SCDB, div4); - if (ret < 0) - return ret; - - /* set SSP audio pll clock */ - ret = snd_soc_dai_set_pll(cpu_dai, 0, 0, 0, acps); - if (ret < 0) - return ret; - return 0; } diff --git a/sound/soc/pxa/zylonite.c b/sound/soc/pxa/zylonite.c index ba468e560dd2..230eee450f45 100644 --- a/sound/soc/pxa/zylonite.c +++ b/sound/soc/pxa/zylonite.c @@ -83,11 +83,9 @@ static int zylonite_voice_hw_params(struct snd_pcm_substream *substream, struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_dai *codec_dai = rtd->codec_dai; struct snd_soc_dai *cpu_dai = rtd->cpu_dai; - unsigned int pll_out = 0; unsigned int wm9713_div = 0; int ret = 0; int rate = params_rate(params); - int width = snd_pcm_format_physical_width(params_format(params)); /* Only support ratios that we can generate neatly from the AC97 * based master clock - in particular, this excludes 44.1kHz. @@ -109,17 +107,10 @@ static int zylonite_voice_hw_params(struct snd_pcm_substream *substream, return -EINVAL; } - /* Add 1 to the width for the leading clock cycle */ - pll_out = rate * (width + 1) * 8; - ret = snd_soc_dai_set_sysclk(cpu_dai, PXA_SSP_CLK_AUDIO, 0, 1); if (ret < 0) return ret; - ret = snd_soc_dai_set_pll(cpu_dai, 0, 0, 0, pll_out); - if (ret < 0) - return ret; - if (clk_pout) ret = snd_soc_dai_set_clkdiv(codec_dai, WM9713_PCMCLK_PLL_DIV, WM9713_PCMDIV(wm9713_div)); -- cgit v1.2.3 From bc88ad2efd11f29e00a4fd60fcd1887abfe76833 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 20 Jul 2018 13:58:21 +0200 Subject: MIPS: ath79: fix register address in ath79_ddr_wb_flush() ath79_ddr_wb_flush_base has the type void __iomem *, so register offsets need to be a multiple of 4 in order to access the intended register. Signed-off-by: Felix Fietkau Signed-off-by: John Crispin Signed-off-by: Paul Burton Fixes: 24b0e3e84fbf ("MIPS: ath79: Improve the DDR controller interface") Patchwork: https://patchwork.linux-mips.org/patch/19912/ Cc: Alban Bedel Cc: James Hogan Cc: Ralf Baechle Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # 4.2+ --- arch/mips/ath79/common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/ath79/common.c b/arch/mips/ath79/common.c index 10a405d593df..c782b10ddf50 100644 --- a/arch/mips/ath79/common.c +++ b/arch/mips/ath79/common.c @@ -58,7 +58,7 @@ EXPORT_SYMBOL_GPL(ath79_ddr_ctrl_init); void ath79_ddr_wb_flush(u32 reg) { - void __iomem *flush_reg = ath79_ddr_wb_flush_base + reg; + void __iomem *flush_reg = ath79_ddr_wb_flush_base + (reg * 4); /* Flush the DDR write buffer. */ __raw_writel(0x1, flush_reg); -- cgit v1.2.3 From 9d83601a9cc1884d1b5706ee2acc661d558c6838 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 20 Jul 2018 14:47:03 -0400 Subject: tools/power turbostat: fix -S on UP systems The -S (system summary) option failed to print any data on a 1-processor system. Reported-by: Artem Bityutskiy Signed-off-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 4d14bbbf9b63..81a1df0fb5e2 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -1163,9 +1163,7 @@ void format_all_counters(struct thread_data *t, struct core_data *c, struct pkg_ if (!printed || !summary_only) print_header("\t"); - if (topo.num_cpus > 1) - format_counters(&average.threads, &average.cores, - &average.packages); + format_counters(&average.threads, &average.cores, &average.packages); printed = 1; -- cgit v1.2.3 From 2987babb6982306509380fc11b450227a844493b Mon Sep 17 00:00:00 2001 From: Yuchung Cheng Date: Wed, 18 Jul 2018 13:56:34 -0700 Subject: tcp: helpers to send special DCTCP ack Refactor and create helpers to send the special ACK in DCTCP. Signed-off-by: Yuchung Cheng Acked-by: Neal Cardwell Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/tcp_output.c | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-) diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index 00e5a300ddb9..ee1b0705321d 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -1023,8 +1023,8 @@ static void tcp_update_skb_after_send(struct tcp_sock *tp, struct sk_buff *skb) * We are working here with either a clone of the original * SKB, or a fresh unique copy made by the retransmit engine. */ -static int tcp_transmit_skb(struct sock *sk, struct sk_buff *skb, int clone_it, - gfp_t gfp_mask) +static int __tcp_transmit_skb(struct sock *sk, struct sk_buff *skb, + int clone_it, gfp_t gfp_mask, u32 rcv_nxt) { const struct inet_connection_sock *icsk = inet_csk(sk); struct inet_sock *inet; @@ -1100,7 +1100,7 @@ static int tcp_transmit_skb(struct sock *sk, struct sk_buff *skb, int clone_it, th->source = inet->inet_sport; th->dest = inet->inet_dport; th->seq = htonl(tcb->seq); - th->ack_seq = htonl(tp->rcv_nxt); + th->ack_seq = htonl(rcv_nxt); *(((__be16 *)th) + 6) = htons(((tcp_header_size >> 2) << 12) | tcb->tcp_flags); @@ -1178,6 +1178,13 @@ static int tcp_transmit_skb(struct sock *sk, struct sk_buff *skb, int clone_it, return err; } +static int tcp_transmit_skb(struct sock *sk, struct sk_buff *skb, int clone_it, + gfp_t gfp_mask) +{ + return __tcp_transmit_skb(sk, skb, clone_it, gfp_mask, + tcp_sk(sk)->rcv_nxt); +} + /* This routine just queues the buffer for sending. * * NOTE: probe0 timer is not checked, do not forget tcp_push_pending_frames, @@ -3571,7 +3578,7 @@ void tcp_send_delayed_ack(struct sock *sk) } /* This routine sends an ack and also updates the window. */ -void tcp_send_ack(struct sock *sk) +void __tcp_send_ack(struct sock *sk, u32 rcv_nxt) { struct sk_buff *buff; @@ -3604,7 +3611,12 @@ void tcp_send_ack(struct sock *sk) skb_set_tcp_pure_ack(buff); /* Send it off, this clears delayed acks for us. */ - tcp_transmit_skb(sk, buff, 0, (__force gfp_t)0); + __tcp_transmit_skb(sk, buff, 0, (__force gfp_t)0, rcv_nxt); +} + +void tcp_send_ack(struct sock *sk) +{ + __tcp_send_ack(sk, tcp_sk(sk)->rcv_nxt); } EXPORT_SYMBOL_GPL(tcp_send_ack); -- cgit v1.2.3 From 27cde44a259c380a3c09066fc4b42de7dde9b1ad Mon Sep 17 00:00:00 2001 From: Yuchung Cheng Date: Wed, 18 Jul 2018 13:56:35 -0700 Subject: tcp: do not cancel delay-AcK on DCTCP special ACK Currently when a DCTCP receiver delays an ACK and receive a data packet with a different CE mark from the previous one's, it sends two immediate ACKs acking previous and latest sequences respectly (for ECN accounting). Previously sending the first ACK may mark off the delayed ACK timer (tcp_event_ack_sent). This may subsequently prevent sending the second ACK to acknowledge the latest sequence (tcp_ack_snd_check). The culprit is that tcp_send_ack() assumes it always acknowleges the latest sequence, which is not true for the first special ACK. The fix is to not make the assumption in tcp_send_ack and check the actual ack sequence before cancelling the delayed ACK. Further it's safer to pass the ack sequence number as a local variable into tcp_send_ack routine, instead of intercepting tp->rcv_nxt to avoid future bugs like this. Reported-by: Neal Cardwell Signed-off-by: Yuchung Cheng Acked-by: Neal Cardwell Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/net/tcp.h | 1 + net/ipv4/tcp_dctcp.c | 34 ++++------------------------------ net/ipv4/tcp_output.c | 10 +++++++--- 3 files changed, 12 insertions(+), 33 deletions(-) diff --git a/include/net/tcp.h b/include/net/tcp.h index 3482d13d655b..a08de496d1b2 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -539,6 +539,7 @@ void tcp_send_fin(struct sock *sk); void tcp_send_active_reset(struct sock *sk, gfp_t priority); int tcp_send_synack(struct sock *); void tcp_push_one(struct sock *, unsigned int mss_now); +void __tcp_send_ack(struct sock *sk, u32 rcv_nxt); void tcp_send_ack(struct sock *sk); void tcp_send_delayed_ack(struct sock *sk); void tcp_send_loss_probe(struct sock *sk); diff --git a/net/ipv4/tcp_dctcp.c b/net/ipv4/tcp_dctcp.c index 5869f89ca656..078328afbfe3 100644 --- a/net/ipv4/tcp_dctcp.c +++ b/net/ipv4/tcp_dctcp.c @@ -133,21 +133,8 @@ static void dctcp_ce_state_0_to_1(struct sock *sk) * ACK has not sent yet. */ if (!ca->ce_state && - inet_csk(sk)->icsk_ack.pending & ICSK_ACK_TIMER) { - u32 tmp_rcv_nxt; - - /* Save current rcv_nxt. */ - tmp_rcv_nxt = tp->rcv_nxt; - - /* Generate previous ack with CE=0. */ - tp->ecn_flags &= ~TCP_ECN_DEMAND_CWR; - tp->rcv_nxt = ca->prior_rcv_nxt; - - tcp_send_ack(sk); - - /* Recover current rcv_nxt. */ - tp->rcv_nxt = tmp_rcv_nxt; - } + inet_csk(sk)->icsk_ack.pending & ICSK_ACK_TIMER) + __tcp_send_ack(sk, ca->prior_rcv_nxt); ca->prior_rcv_nxt = tp->rcv_nxt; ca->ce_state = 1; @@ -164,21 +151,8 @@ static void dctcp_ce_state_1_to_0(struct sock *sk) * ACK has not sent yet. */ if (ca->ce_state && - inet_csk(sk)->icsk_ack.pending & ICSK_ACK_TIMER) { - u32 tmp_rcv_nxt; - - /* Save current rcv_nxt. */ - tmp_rcv_nxt = tp->rcv_nxt; - - /* Generate previous ack with CE=1. */ - tp->ecn_flags |= TCP_ECN_DEMAND_CWR; - tp->rcv_nxt = ca->prior_rcv_nxt; - - tcp_send_ack(sk); - - /* Recover current rcv_nxt. */ - tp->rcv_nxt = tmp_rcv_nxt; - } + inet_csk(sk)->icsk_ack.pending & ICSK_ACK_TIMER) + __tcp_send_ack(sk, ca->prior_rcv_nxt); ca->prior_rcv_nxt = tp->rcv_nxt; ca->ce_state = 0; diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index ee1b0705321d..c4172c1fb198 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -160,7 +160,8 @@ static void tcp_event_data_sent(struct tcp_sock *tp, } /* Account for an ACK we sent. */ -static inline void tcp_event_ack_sent(struct sock *sk, unsigned int pkts) +static inline void tcp_event_ack_sent(struct sock *sk, unsigned int pkts, + u32 rcv_nxt) { struct tcp_sock *tp = tcp_sk(sk); @@ -171,6 +172,9 @@ static inline void tcp_event_ack_sent(struct sock *sk, unsigned int pkts) if (hrtimer_try_to_cancel(&tp->compressed_ack_timer) == 1) __sock_put(sk); } + + if (unlikely(rcv_nxt != tp->rcv_nxt)) + return; /* Special ACK sent by DCTCP to reflect ECN */ tcp_dec_quickack_mode(sk, pkts); inet_csk_clear_xmit_timer(sk, ICSK_TIME_DACK); } @@ -1141,7 +1145,7 @@ static int __tcp_transmit_skb(struct sock *sk, struct sk_buff *skb, icsk->icsk_af_ops->send_check(sk, skb); if (likely(tcb->tcp_flags & TCPHDR_ACK)) - tcp_event_ack_sent(sk, tcp_skb_pcount(skb)); + tcp_event_ack_sent(sk, tcp_skb_pcount(skb), rcv_nxt); if (skb->len != tcp_header_size) { tcp_event_data_sent(tp, sk); @@ -3613,12 +3617,12 @@ void __tcp_send_ack(struct sock *sk, u32 rcv_nxt) /* Send it off, this clears delayed acks for us. */ __tcp_transmit_skb(sk, buff, 0, (__force gfp_t)0, rcv_nxt); } +EXPORT_SYMBOL_GPL(__tcp_send_ack); void tcp_send_ack(struct sock *sk) { __tcp_send_ack(sk, tcp_sk(sk)->rcv_nxt); } -EXPORT_SYMBOL_GPL(tcp_send_ack); /* This routine sends a packet with an out of date sequence * number. It assumes the other end will try to ack it. -- cgit v1.2.3 From a0496ef2c23b3b180902dd185d0d63ccbc624cf8 Mon Sep 17 00:00:00 2001 From: Yuchung Cheng Date: Wed, 18 Jul 2018 13:56:36 -0700 Subject: tcp: do not delay ACK in DCTCP upon CE status change Per DCTCP RFC8257 (Section 3.2) the ACK reflecting the CE status change has to be sent immediately so the sender can respond quickly: """ When receiving packets, the CE codepoint MUST be processed as follows: 1. If the CE codepoint is set and DCTCP.CE is false, set DCTCP.CE to true and send an immediate ACK. 2. If the CE codepoint is not set and DCTCP.CE is true, set DCTCP.CE to false and send an immediate ACK. """ Previously DCTCP implementation may continue to delay the ACK. This patch fixes that to implement the RFC by forcing an immediate ACK. Tested with this packetdrill script provided by Larry Brakmo 0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 0.000 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 0.000 setsockopt(3, SOL_TCP, TCP_CONGESTION, "dctcp", 5) = 0 0.000 bind(3, ..., ...) = 0 0.000 listen(3, 1) = 0 0.100 < [ect0] SEW 0:0(0) win 32792 0.100 > SE. 0:0(0) ack 1 0.110 < [ect0] . 1:1(0) ack 1 win 257 0.200 accept(3, ..., ...) = 4 +0 setsockopt(4, SOL_SOCKET, SO_DEBUG, [1], 4) = 0 0.200 < [ect0] . 1:1001(1000) ack 1 win 257 0.200 > [ect01] . 1:1(0) ack 1001 0.200 write(4, ..., 1) = 1 0.200 > [ect01] P. 1:2(1) ack 1001 0.200 < [ect0] . 1001:2001(1000) ack 2 win 257 +0.005 < [ce] . 2001:3001(1000) ack 2 win 257 +0.000 > [ect01] . 2:2(0) ack 2001 // Previously the ACK below would be delayed by 40ms +0.000 > [ect01] E. 2:2(0) ack 3001 +0.500 < F. 9501:9501(0) ack 4 win 257 Signed-off-by: Yuchung Cheng Acked-by: Neal Cardwell Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/net/tcp.h | 1 + net/ipv4/tcp_dctcp.c | 30 ++++++++++++++++++------------ net/ipv4/tcp_input.c | 3 ++- 3 files changed, 21 insertions(+), 13 deletions(-) diff --git a/include/net/tcp.h b/include/net/tcp.h index a08de496d1b2..25116ec02087 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -342,6 +342,7 @@ ssize_t tcp_splice_read(struct socket *sk, loff_t *ppos, struct pipe_inode_info *pipe, size_t len, unsigned int flags); +void tcp_enter_quickack_mode(struct sock *sk, unsigned int max_quickacks); static inline void tcp_dec_quickack_mode(struct sock *sk, const unsigned int pkts) { diff --git a/net/ipv4/tcp_dctcp.c b/net/ipv4/tcp_dctcp.c index 078328afbfe3..8b637f9f23a2 100644 --- a/net/ipv4/tcp_dctcp.c +++ b/net/ipv4/tcp_dctcp.c @@ -129,12 +129,15 @@ static void dctcp_ce_state_0_to_1(struct sock *sk) struct dctcp *ca = inet_csk_ca(sk); struct tcp_sock *tp = tcp_sk(sk); - /* State has changed from CE=0 to CE=1 and delayed - * ACK has not sent yet. - */ - if (!ca->ce_state && - inet_csk(sk)->icsk_ack.pending & ICSK_ACK_TIMER) - __tcp_send_ack(sk, ca->prior_rcv_nxt); + if (!ca->ce_state) { + /* State has changed from CE=0 to CE=1, force an immediate + * ACK to reflect the new CE state. If an ACK was delayed, + * send that first to reflect the prior CE state. + */ + if (inet_csk(sk)->icsk_ack.pending & ICSK_ACK_TIMER) + __tcp_send_ack(sk, ca->prior_rcv_nxt); + tcp_enter_quickack_mode(sk, 1); + } ca->prior_rcv_nxt = tp->rcv_nxt; ca->ce_state = 1; @@ -147,12 +150,15 @@ static void dctcp_ce_state_1_to_0(struct sock *sk) struct dctcp *ca = inet_csk_ca(sk); struct tcp_sock *tp = tcp_sk(sk); - /* State has changed from CE=1 to CE=0 and delayed - * ACK has not sent yet. - */ - if (ca->ce_state && - inet_csk(sk)->icsk_ack.pending & ICSK_ACK_TIMER) - __tcp_send_ack(sk, ca->prior_rcv_nxt); + if (ca->ce_state) { + /* State has changed from CE=1 to CE=0, force an immediate + * ACK to reflect the new CE state. If an ACK was delayed, + * send that first to reflect the prior CE state. + */ + if (inet_csk(sk)->icsk_ack.pending & ICSK_ACK_TIMER) + __tcp_send_ack(sk, ca->prior_rcv_nxt); + tcp_enter_quickack_mode(sk, 1); + } ca->prior_rcv_nxt = tp->rcv_nxt; ca->ce_state = 0; diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 8e5522c6833a..6bade06aaf72 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -215,7 +215,7 @@ static void tcp_incr_quickack(struct sock *sk, unsigned int max_quickacks) icsk->icsk_ack.quick = quickacks; } -static void tcp_enter_quickack_mode(struct sock *sk, unsigned int max_quickacks) +void tcp_enter_quickack_mode(struct sock *sk, unsigned int max_quickacks) { struct inet_connection_sock *icsk = inet_csk(sk); @@ -223,6 +223,7 @@ static void tcp_enter_quickack_mode(struct sock *sk, unsigned int max_quickacks) icsk->icsk_ack.pingpong = 0; icsk->icsk_ack.ato = TCP_ATO_MIN; } +EXPORT_SYMBOL(tcp_enter_quickack_mode); /* Send ACKs quickly, if "quick" count is not exhausted * and the session is not interactive. -- cgit v1.2.3 From fcf4793e278edede8fcd748198d12128037e526c Mon Sep 17 00:00:00 2001 From: Doron Roberts-Kedes Date: Wed, 18 Jul 2018 16:22:27 -0700 Subject: tls: check RCV_SHUTDOWN in tls_wait_data The current code does not check sk->sk_shutdown & RCV_SHUTDOWN. tls_sw_recvmsg may return a positive value in the case where bytes have already been copied when the socket is shutdown. sk->sk_err has been cleared, causing the tls_wait_data to hang forever on a subsequent invocation. Checking sk->sk_shutdown & RCV_SHUTDOWN, as in tcp_recvmsg, fixes this problem. Fixes: c46234ebb4d1 ("tls: RX path for ktls") Acked-by: Dave Watson Signed-off-by: Doron Roberts-Kedes Signed-off-by: David S. Miller --- net/tls/tls_sw.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/tls/tls_sw.c b/net/tls/tls_sw.c index 4618f1c31137..1f3d9789af30 100644 --- a/net/tls/tls_sw.c +++ b/net/tls/tls_sw.c @@ -646,6 +646,9 @@ static struct sk_buff *tls_wait_data(struct sock *sk, int flags, return NULL; } + if (sk->sk_shutdown & RCV_SHUTDOWN) + return NULL; + if (sock_flag(sk, SOCK_DONE)) return NULL; -- cgit v1.2.3 From 249a32b7eeb3edb6897dd38f89651a62163ac4ed Mon Sep 17 00:00:00 2001 From: Bin Liu Date: Thu, 19 Jul 2018 14:39:37 -0500 Subject: usb: core: handle hub C_PORT_OVER_CURRENT condition Based on USB2.0 Spec Section 11.12.5, "If a hub has per-port power switching and per-port current limiting, an over-current on one port may still cause the power on another port to fall below specific minimums. In this case, the affected port is placed in the Power-Off state and C_PORT_OVER_CURRENT is set for the port, but PORT_OVER_CURRENT is not set." so let's check C_PORT_OVER_CURRENT too for over current condition. Fixes: 08d1dec6f405 ("usb:hub set hub->change_bits when over-current happens") Cc: Tested-by: Alessandro Antenucci Signed-off-by: Bin Liu Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index fcae521df29b..1fb266809966 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1142,10 +1142,14 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) if (!udev || udev->state == USB_STATE_NOTATTACHED) { /* Tell hub_wq to disconnect the device or - * check for a new connection + * check for a new connection or over current condition. + * Based on USB2.0 Spec Section 11.12.5, + * C_PORT_OVER_CURRENT could be set while + * PORT_OVER_CURRENT is not. So check for any of them. */ if (udev || (portstatus & USB_PORT_STAT_CONNECTION) || - (portstatus & USB_PORT_STAT_OVERCURRENT)) + (portstatus & USB_PORT_STAT_OVERCURRENT) || + (portchange & USB_PORT_STAT_C_OVERCURRENT)) set_bit(port1, hub->change_bits); } else if (portstatus & USB_PORT_STAT_ENABLE) { -- cgit v1.2.3 From c1f897ce186a529a494441642125479d38727a3d Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Wed, 18 Jul 2018 14:49:36 -0400 Subject: bonding: set default miimon value for non-arp modes if not set For some time now, if you load the bonding driver and configure bond parameters via sysfs using minimal config options, such as specifying nothing but the mode, relying on defaults for everything else, modes that cannot use arp monitoring (802.3ad, balance-tlb, balance-alb) all wind up with both arp_interval=0 (as it should be) and miimon=0, which means the miimon monitor thread never actually runs. This is particularly problematic for 802.3ad. For example, from an LNST recipe I've set up: $ modprobe bonding max_bonds=0" $ echo "+t_bond0" > /sys/class/net/bonding_masters" $ ip link set t_bond0 down" $ echo "802.3ad" > /sys/class/net/t_bond0/bonding/mode" $ ip link set ens1f1 down" $ echo "+ens1f1" > /sys/class/net/t_bond0/bonding/slaves" $ ip link set ens1f0 down" $ echo "+ens1f0" > /sys/class/net/t_bond0/bonding/slaves" $ ethtool -i t_bond0" $ ip link set ens1f1 up" $ ip link set ens1f0 up" $ ip link set t_bond0 up" $ ip addr add 192.168.9.1/24 dev t_bond0" $ ip addr add 2002::1/64 dev t_bond0" This bond comes up okay, but things look slightly suspect in /proc/net/bonding/t_bond0 output: $ grep -i mii /proc/net/bonding/t_bond0 MII Status: up MII Polling Interval (ms): 0 MII Status: up MII Status: up Now, pull a cable on one of the ports in the bond, then reconnect it, and you'll see: Slave Interface: ens1f0 MII Status: down Speed: 1000 Mbps Duplex: full I believe this became a major issue as of commit 4d2c0cda0744, which for 802.3ad bonds, sets slave->link = BOND_LINK_DOWN, with a comment about relying on link monitoring via miimon to set it correctly, but since the miimon work queue never runs, the link just stays marked down. If we simply tweak bond_option_mode_set() slightly, we can check for the non-arp modes having no miimon value set, and insert BOND_DEFAULT_MIIMON, which gets things back in full working order. This problem exists as far back as 4.14, and might be worth fixing in all stable trees since, though the work-around is to simply specify an miimon value yourself. Reported-by: Bob Ball Signed-off-by: Jarod Wilson Acked-by: Mahesh Bandewar Signed-off-by: David S. Miller --- drivers/net/bonding/bond_options.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) diff --git a/drivers/net/bonding/bond_options.c b/drivers/net/bonding/bond_options.c index 98663c50ded0..4d5d01cb8141 100644 --- a/drivers/net/bonding/bond_options.c +++ b/drivers/net/bonding/bond_options.c @@ -743,15 +743,20 @@ const struct bond_option *bond_opt_get(unsigned int option) static int bond_option_mode_set(struct bonding *bond, const struct bond_opt_value *newval) { - if (!bond_mode_uses_arp(newval->value) && bond->params.arp_interval) { - netdev_dbg(bond->dev, "%s mode is incompatible with arp monitoring, start mii monitoring\n", - newval->string); - /* disable arp monitoring */ - bond->params.arp_interval = 0; - /* set miimon to default value */ - bond->params.miimon = BOND_DEFAULT_MIIMON; - netdev_dbg(bond->dev, "Setting MII monitoring interval to %d\n", - bond->params.miimon); + if (!bond_mode_uses_arp(newval->value)) { + if (bond->params.arp_interval) { + netdev_dbg(bond->dev, "%s mode is incompatible with arp monitoring, start mii monitoring\n", + newval->string); + /* disable arp monitoring */ + bond->params.arp_interval = 0; + } + + if (!bond->params.miimon) { + /* set miimon to default value */ + bond->params.miimon = BOND_DEFAULT_MIIMON; + netdev_dbg(bond->dev, "Setting MII monitoring interval to %d\n", + bond->params.miimon); + } } if (newval->value == BOND_MODE_ALB) -- cgit v1.2.3 From 1937367205d930deafb11c387b0a71dd215254d5 Mon Sep 17 00:00:00 2001 From: Mathieu Malaterre Date: Fri, 20 Jul 2018 17:53:31 -0700 Subject: mm/memblock: add missing include Commit 26f09e9b3a06 ("mm/memblock: add memblock memory allocation apis") introduced two new function definitions: memblock_virt_alloc_try_nid_nopanic() memblock_virt_alloc_try_nid() and commit ea1f5f3712af ("mm: define memblock_virt_alloc_try_nid_raw") introduced the following function definition: memblock_virt_alloc_try_nid_raw() This commit adds an include of header file to provide the missing function prototypes. This silences the following gcc warning (W=1): mm/memblock.c:1334:15: warning: no previous prototype for `memblock_virt_alloc_try_nid_raw' [-Wmissing-prototypes] mm/memblock.c:1371:15: warning: no previous prototype for `memblock_virt_alloc_try_nid_nopanic' [-Wmissing-prototypes] mm/memblock.c:1407:15: warning: no previous prototype for `memblock_virt_alloc_try_nid' [-Wmissing-prototypes] Also adds #ifdef blockers to prevent compilation failure on mips/ia64 where CONFIG_NO_BOOTMEM=n as could be seen in commit commit 6cc22dc08a24 ("revert "mm/memblock: add missing include ""). Because Makefile already does: obj-$(CONFIG_HAVE_MEMBLOCK) += memblock.o The #ifdef has been simplified from: #if defined(CONFIG_HAVE_MEMBLOCK) && defined(CONFIG_NO_BOOTMEM) to simply: #if defined(CONFIG_NO_BOOTMEM) Link: http://lkml.kernel.org/r/20180626184422.24974-1-malat@debian.org Signed-off-by: Mathieu Malaterre Suggested-by: Tony Luck Suggested-by: Michal Hocko Acked-by: Michal Hocko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memblock.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/mm/memblock.c b/mm/memblock.c index 11e46f83e1ad..4b5d245fafc1 100644 --- a/mm/memblock.c +++ b/mm/memblock.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include @@ -1225,6 +1226,7 @@ phys_addr_t __init memblock_alloc_try_nid(phys_addr_t size, phys_addr_t align, i return memblock_alloc_base(size, align, MEMBLOCK_ALLOC_ACCESSIBLE); } +#if defined(CONFIG_NO_BOOTMEM) /** * memblock_virt_alloc_internal - allocate boot memory block * @size: size of memory block to be allocated in bytes @@ -1432,6 +1434,7 @@ void * __init memblock_virt_alloc_try_nid( (u64)max_addr); return NULL; } +#endif /** * __memblock_free_early - free boot memory block -- cgit v1.2.3 From 5a6964944cdfe83de849a5f748f51c983f9914ec Mon Sep 17 00:00:00 2001 From: Peter Senna Tschudin Date: Fri, 20 Jul 2018 17:53:38 -0700 Subject: MAINTAINERS: Peter has moved Update my E-mail address in the MAINTAINERS file. Link: http://lkml.kernel.org/r/20180710144702.1308-1-peter.senna@gmail.com Signed-off-by: Peter Senna Tschudin Reviewed-by: Sebastian Reichel Acked-by: Martyn Welch Cc: David S. Miller Cc: Mauro Carvalho Chehab Cc: Greg Kroah-Hartman Cc: Randy Dunlap Cc: Martin Donnelly Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 1505c8ea8e7b..0fe4228f78cb 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9074,7 +9074,7 @@ S: Maintained F: drivers/usb/mtu3/ MEGACHIPS STDPXXXX-GE-B850V3-FW LVDS/DP++ BRIDGES -M: Peter Senna Tschudin +M: Peter Senna Tschudin M: Martin Donnelly M: Martyn Welch S: Maintained -- cgit v1.2.3 From 35033ab988c396ad7bce3b6d24060c16a9066db8 Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Fri, 20 Jul 2018 17:53:42 -0700 Subject: fat: fix memory allocation failure handling of match_strdup() In parse_options(), if match_strdup() failed, parse_options() leaves opts->iocharset in unexpected state (i.e. still pointing the freed string). And this can be the cause of double free. To fix, this initialize opts->iocharset always when freeing. Link: http://lkml.kernel.org/r/8736wp9dzc.fsf@mail.parknet.co.jp Signed-off-by: OGAWA Hirofumi Reported-by: syzbot+90b8e10515ae88228a92@syzkaller.appspotmail.com Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/fat/inode.c | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-) diff --git a/fs/fat/inode.c b/fs/fat/inode.c index 065dc919a0ce..bfd589ea74c0 100644 --- a/fs/fat/inode.c +++ b/fs/fat/inode.c @@ -707,13 +707,21 @@ static void fat_set_state(struct super_block *sb, brelse(bh); } +static void fat_reset_iocharset(struct fat_mount_options *opts) +{ + if (opts->iocharset != fat_default_iocharset) { + /* Note: opts->iocharset can be NULL here */ + kfree(opts->iocharset); + opts->iocharset = fat_default_iocharset; + } +} + static void delayed_free(struct rcu_head *p) { struct msdos_sb_info *sbi = container_of(p, struct msdos_sb_info, rcu); unload_nls(sbi->nls_disk); unload_nls(sbi->nls_io); - if (sbi->options.iocharset != fat_default_iocharset) - kfree(sbi->options.iocharset); + fat_reset_iocharset(&sbi->options); kfree(sbi); } @@ -1132,7 +1140,7 @@ static int parse_options(struct super_block *sb, char *options, int is_vfat, opts->fs_fmask = opts->fs_dmask = current_umask(); opts->allow_utime = -1; opts->codepage = fat_default_codepage; - opts->iocharset = fat_default_iocharset; + fat_reset_iocharset(opts); if (is_vfat) { opts->shortname = VFAT_SFN_DISPLAY_WINNT|VFAT_SFN_CREATE_WIN95; opts->rodir = 0; @@ -1289,8 +1297,7 @@ static int parse_options(struct super_block *sb, char *options, int is_vfat, /* vfat specific */ case Opt_charset: - if (opts->iocharset != fat_default_iocharset) - kfree(opts->iocharset); + fat_reset_iocharset(opts); iocharset = match_strdup(&args[0]); if (!iocharset) return -ENOMEM; @@ -1881,8 +1888,7 @@ out_fail: iput(fat_inode); unload_nls(sbi->nls_io); unload_nls(sbi->nls_disk); - if (sbi->options.iocharset != fat_default_iocharset) - kfree(sbi->options.iocharset); + fat_reset_iocharset(&sbi->options); sb->s_fs_info = NULL; kfree(sbi); return error; -- cgit v1.2.3 From e1f1b1572e8db87a56609fd05bef76f98f0e456a Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Fri, 20 Jul 2018 17:53:45 -0700 Subject: mm/huge_memory.c: fix data loss when splitting a file pmd __split_huge_pmd_locked() must check if the cleared huge pmd was dirty, and propagate that to PageDirty: otherwise, data may be lost when a huge tmpfs page is modified then split then reclaimed. How has this taken so long to be noticed? Because there was no problem when the huge page is written by a write system call (shmem_write_end() calls set_page_dirty()), nor when the page is allocated for a write fault (fault_dirty_shared_page() calls set_page_dirty()); but when allocated for a read fault (which MAP_POPULATE simulates), no set_page_dirty(). Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1807111741430.1106@eggly.anvils Fixes: d21b9e57c74c ("thp: handle file pages in split_huge_pmd()") Signed-off-by: Hugh Dickins Reported-by: Ashwin Chaugule Reviewed-by: Yang Shi Reviewed-by: Kirill A. Shutemov Cc: "Huang, Ying" Cc: [4.8+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/huge_memory.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/mm/huge_memory.c b/mm/huge_memory.c index 1cd7c1a57a14..25346bd99364 100644 --- a/mm/huge_memory.c +++ b/mm/huge_memory.c @@ -2084,6 +2084,8 @@ static void __split_huge_pmd_locked(struct vm_area_struct *vma, pmd_t *pmd, if (vma_is_dax(vma)) return; page = pmd_page(_pmd); + if (!PageDirty(page) && pmd_dirty(_pmd)) + set_page_dirty(page); if (!PageReferenced(page) && pmd_young(_pmd)) SetPageReferenced(page); page_remove_rmap(page, true); -- cgit v1.2.3 From 9f15bde671355c351cf20d9f879004b234353100 Mon Sep 17 00:00:00 2001 From: Jing Xia Date: Fri, 20 Jul 2018 17:53:48 -0700 Subject: mm: memcg: fix use after free in mem_cgroup_iter() It was reported that a kernel crash happened in mem_cgroup_iter(), which can be triggered if the legacy cgroup-v1 non-hierarchical mode is used. Unable to handle kernel paging request at virtual address 6b6b6b6b6b6b8f ...... Call trace: mem_cgroup_iter+0x2e0/0x6d4 shrink_zone+0x8c/0x324 balance_pgdat+0x450/0x640 kswapd+0x130/0x4b8 kthread+0xe8/0xfc ret_from_fork+0x10/0x20 mem_cgroup_iter(): ...... if (css_tryget(css)) <-- crash here break; ...... The crashing reason is that mem_cgroup_iter() uses the memcg object whose pointer is stored in iter->position, which has been freed before and filled with POISON_FREE(0x6b). And the root cause of the use-after-free issue is that invalidate_reclaim_iterators() fails to reset the value of iter->position to NULL when the css of the memcg is released in non- hierarchical mode. Link: http://lkml.kernel.org/r/1531994807-25639-1-git-send-email-jing.xia@unisoc.com Fixes: 6df38689e0e9 ("mm: memcontrol: fix possible memcg leak due to interrupted reclaim") Signed-off-by: Jing Xia Acked-by: Michal Hocko Cc: Johannes Weiner Cc: Vladimir Davydov Cc: Cc: Shakeel Butt Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memcontrol.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/memcontrol.c b/mm/memcontrol.c index e6f0d5ef320a..8c0280b3143e 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -850,7 +850,7 @@ static void invalidate_reclaim_iterators(struct mem_cgroup *dead_memcg) int nid; int i; - while ((memcg = parent_mem_cgroup(memcg))) { + for (; memcg; memcg = parent_mem_cgroup(memcg)) { for_each_node(nid) { mz = mem_cgroup_nodeinfo(memcg, nid); for (i = 0; i <= DEF_PRIORITY; i++) { -- cgit v1.2.3 From 3928d4f5ee37cdc523894f6e549e6aae521d8980 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 21 Jul 2018 13:48:51 -0700 Subject: mm: use helper functions for allocating and freeing vm_area structs The vm_area_struct is one of the most fundamental memory management objects, but the management of it is entirely open-coded evertwhere, ranging from allocation and freeing (using kmem_cache_[z]alloc and kmem_cache_free) to initializing all the fields. We want to unify this in order to end up having some unified initialization of the vmas, and the first step to this is to at least have basic allocation functions. Right now those functions are literally just wrappers around the kmem_cache_*() calls. This is a purely mechanical conversion: # new vma: kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL) -> vm_area_alloc() # copy old vma kmem_cache_alloc(vm_area_cachep, GFP_KERNEL) -> vm_area_dup(old) # free vma kmem_cache_free(vm_area_cachep, vma) -> vm_area_free(vma) to the point where the old vma passed in to the vm_area_dup() function isn't even used yet (because I've left all the old manual initialization alone). Signed-off-by: Linus Torvalds --- arch/ia64/kernel/perfmon.c | 4 ++-- arch/ia64/mm/init.c | 8 ++++---- fs/exec.c | 4 ++-- include/linux/mm.h | 4 +++- kernel/fork.c | 21 ++++++++++++++++++--- mm/mmap.c | 22 +++++++++++----------- mm/nommu.c | 8 ++++---- 7 files changed, 44 insertions(+), 27 deletions(-) diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index 3b38c717008a..e859246badca 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -2278,7 +2278,7 @@ pfm_smpl_buffer_alloc(struct task_struct *task, struct file *filp, pfm_context_t DPRINT(("smpl_buf @%p\n", smpl_buf)); /* allocate vma */ - vma = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL); + vma = vm_area_alloc(); if (!vma) { DPRINT(("Cannot allocate vma\n")); goto error_kmem; @@ -2346,7 +2346,7 @@ pfm_smpl_buffer_alloc(struct task_struct *task, struct file *filp, pfm_context_t return 0; error: - kmem_cache_free(vm_area_cachep, vma); + vm_area_free(vma); error_kmem: pfm_rvfree(smpl_buf, size); diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c index 18278b448530..3f2321bffb72 100644 --- a/arch/ia64/mm/init.c +++ b/arch/ia64/mm/init.c @@ -114,7 +114,7 @@ ia64_init_addr_space (void) * the problem. When the process attempts to write to the register backing store * for the first time, it will get a SEGFAULT in this case. */ - vma = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL); + vma = vm_area_alloc(); if (vma) { INIT_LIST_HEAD(&vma->anon_vma_chain); vma->vm_mm = current->mm; @@ -125,7 +125,7 @@ ia64_init_addr_space (void) down_write(¤t->mm->mmap_sem); if (insert_vm_struct(current->mm, vma)) { up_write(¤t->mm->mmap_sem); - kmem_cache_free(vm_area_cachep, vma); + vm_area_free(vma); return; } up_write(¤t->mm->mmap_sem); @@ -133,7 +133,7 @@ ia64_init_addr_space (void) /* map NaT-page at address zero to speed up speculative dereferencing of NULL: */ if (!(current->personality & MMAP_PAGE_ZERO)) { - vma = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL); + vma = vm_area_alloc(); if (vma) { INIT_LIST_HEAD(&vma->anon_vma_chain); vma->vm_mm = current->mm; @@ -144,7 +144,7 @@ ia64_init_addr_space (void) down_write(¤t->mm->mmap_sem); if (insert_vm_struct(current->mm, vma)) { up_write(¤t->mm->mmap_sem); - kmem_cache_free(vm_area_cachep, vma); + vm_area_free(vma); return; } up_write(¤t->mm->mmap_sem); diff --git a/fs/exec.c b/fs/exec.c index 2d4e0075bd24..9bd83989ea25 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -290,7 +290,7 @@ static int __bprm_mm_init(struct linux_binprm *bprm) struct vm_area_struct *vma = NULL; struct mm_struct *mm = bprm->mm; - bprm->vma = vma = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL); + bprm->vma = vma = vm_area_alloc(); if (!vma) return -ENOMEM; @@ -326,7 +326,7 @@ err: up_write(&mm->mmap_sem); err_free: bprm->vma = NULL; - kmem_cache_free(vm_area_cachep, vma); + vm_area_free(vma); return err; } diff --git a/include/linux/mm.h b/include/linux/mm.h index 3982c83fdcbf..de2fd86c6154 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -155,7 +155,9 @@ extern int overcommit_kbytes_handler(struct ctl_table *, int, void __user *, * mmap() functions). */ -extern struct kmem_cache *vm_area_cachep; +struct vm_area_struct *vm_area_alloc(void); +struct vm_area_struct *vm_area_dup(struct vm_area_struct *); +void vm_area_free(struct vm_area_struct *); #ifndef CONFIG_MMU extern struct rb_root nommu_region_tree; diff --git a/kernel/fork.c b/kernel/fork.c index 9440d61b925c..0e23deb5acfc 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -303,11 +303,26 @@ struct kmem_cache *files_cachep; struct kmem_cache *fs_cachep; /* SLAB cache for vm_area_struct structures */ -struct kmem_cache *vm_area_cachep; +static struct kmem_cache *vm_area_cachep; /* SLAB cache for mm_struct structures (tsk->mm) */ static struct kmem_cache *mm_cachep; +struct vm_area_struct *vm_area_alloc(void) +{ + return kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL); +} + +struct vm_area_struct *vm_area_dup(struct vm_area_struct *orig) +{ + return kmem_cache_alloc(vm_area_cachep, GFP_KERNEL); +} + +void vm_area_free(struct vm_area_struct *vma) +{ + kmem_cache_free(vm_area_cachep, vma); +} + static void account_kernel_stack(struct task_struct *tsk, int account) { void *stack = task_stack_page(tsk); @@ -455,7 +470,7 @@ static __latent_entropy int dup_mmap(struct mm_struct *mm, goto fail_nomem; charge = len; } - tmp = kmem_cache_alloc(vm_area_cachep, GFP_KERNEL); + tmp = vm_area_dup(mpnt); if (!tmp) goto fail_nomem; *tmp = *mpnt; @@ -539,7 +554,7 @@ fail_uprobe_end: fail_nomem_anon_vma_fork: mpol_put(vma_policy(tmp)); fail_nomem_policy: - kmem_cache_free(vm_area_cachep, tmp); + vm_area_free(tmp); fail_nomem: retval = -ENOMEM; vm_unacct_memory(charge); diff --git a/mm/mmap.c b/mm/mmap.c index 5801b5f0a634..4286ad2dd1f5 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -182,7 +182,7 @@ static struct vm_area_struct *remove_vma(struct vm_area_struct *vma) if (vma->vm_file) fput(vma->vm_file); mpol_put(vma_policy(vma)); - kmem_cache_free(vm_area_cachep, vma); + vm_area_free(vma); return next; } @@ -911,7 +911,7 @@ again: anon_vma_merge(vma, next); mm->map_count--; mpol_put(vma_policy(next)); - kmem_cache_free(vm_area_cachep, next); + vm_area_free(next); /* * In mprotect's case 6 (see comments on vma_merge), * we must remove another next too. It would clutter @@ -1729,7 +1729,7 @@ unsigned long mmap_region(struct file *file, unsigned long addr, * specific mapper. the address has already been validated, but * not unmapped, but the maps are removed from the list. */ - vma = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL); + vma = vm_area_alloc(); if (!vma) { error = -ENOMEM; goto unacct_error; @@ -1832,7 +1832,7 @@ allow_write_and_free_vma: if (vm_flags & VM_DENYWRITE) allow_write_access(file); free_vma: - kmem_cache_free(vm_area_cachep, vma); + vm_area_free(vma); unacct_error: if (charged) vm_unacct_memory(charged); @@ -2620,7 +2620,7 @@ int __split_vma(struct mm_struct *mm, struct vm_area_struct *vma, return err; } - new = kmem_cache_alloc(vm_area_cachep, GFP_KERNEL); + new = vm_area_dup(vma); if (!new) return -ENOMEM; @@ -2669,7 +2669,7 @@ int __split_vma(struct mm_struct *mm, struct vm_area_struct *vma, out_free_mpol: mpol_put(vma_policy(new)); out_free_vma: - kmem_cache_free(vm_area_cachep, new); + vm_area_free(new); return err; } @@ -2984,7 +2984,7 @@ static int do_brk_flags(unsigned long addr, unsigned long len, unsigned long fla /* * create a vma struct for an anonymous mapping */ - vma = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL); + vma = vm_area_alloc(); if (!vma) { vm_unacct_memory(len >> PAGE_SHIFT); return -ENOMEM; @@ -3202,7 +3202,7 @@ struct vm_area_struct *copy_vma(struct vm_area_struct **vmap, } *need_rmap_locks = (new_vma->vm_pgoff <= vma->vm_pgoff); } else { - new_vma = kmem_cache_alloc(vm_area_cachep, GFP_KERNEL); + new_vma = vm_area_dup(vma); if (!new_vma) goto out; *new_vma = *vma; @@ -3226,7 +3226,7 @@ struct vm_area_struct *copy_vma(struct vm_area_struct **vmap, out_free_mempol: mpol_put(vma_policy(new_vma)); out_free_vma: - kmem_cache_free(vm_area_cachep, new_vma); + vm_area_free(new_vma); out: return NULL; } @@ -3350,7 +3350,7 @@ static struct vm_area_struct *__install_special_mapping( int ret; struct vm_area_struct *vma; - vma = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL); + vma = vm_area_alloc(); if (unlikely(vma == NULL)) return ERR_PTR(-ENOMEM); @@ -3376,7 +3376,7 @@ static struct vm_area_struct *__install_special_mapping( return vma; out: - kmem_cache_free(vm_area_cachep, vma); + vm_area_free(vma); return ERR_PTR(ret); } diff --git a/mm/nommu.c b/mm/nommu.c index 4452d8bd9ae4..006e3fe65017 100644 --- a/mm/nommu.c +++ b/mm/nommu.c @@ -769,7 +769,7 @@ static void delete_vma(struct mm_struct *mm, struct vm_area_struct *vma) if (vma->vm_file) fput(vma->vm_file); put_nommu_region(vma->vm_region); - kmem_cache_free(vm_area_cachep, vma); + vm_area_free(vma); } /* @@ -1204,7 +1204,7 @@ unsigned long do_mmap(struct file *file, if (!region) goto error_getting_region; - vma = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL); + vma = vm_area_alloc(); if (!vma) goto error_getting_vma; @@ -1368,7 +1368,7 @@ error: kmem_cache_free(vm_region_jar, region); if (vma->vm_file) fput(vma->vm_file); - kmem_cache_free(vm_area_cachep, vma); + vm_area_free(vma); return ret; sharing_violation: @@ -1469,7 +1469,7 @@ int split_vma(struct mm_struct *mm, struct vm_area_struct *vma, if (!region) return -ENOMEM; - new = kmem_cache_alloc(vm_area_cachep, GFP_KERNEL); + new = vm_area_dup(vma); if (!new) { kmem_cache_free(vm_region_jar, region); return -ENOMEM; -- cgit v1.2.3 From 95faf6992df468f617edb788da8c21c6eed0dfa7 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 21 Jul 2018 14:48:45 -0700 Subject: mm: make vm_area_dup() actually copy the old vma data .. and re-initialize th eanon_vma_chain head. This removes some boiler-plate from the users, and also makes it clear why it didn't need use the 'zalloc()' version. Signed-off-by: Linus Torvalds --- kernel/fork.c | 10 +++++++--- mm/mmap.c | 7 ------- mm/nommu.c | 1 - 3 files changed, 7 insertions(+), 11 deletions(-) diff --git a/kernel/fork.c b/kernel/fork.c index 0e23deb5acfc..67253e41bfb0 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -315,7 +315,13 @@ struct vm_area_struct *vm_area_alloc(void) struct vm_area_struct *vm_area_dup(struct vm_area_struct *orig) { - return kmem_cache_alloc(vm_area_cachep, GFP_KERNEL); + struct vm_area_struct *new = kmem_cache_alloc(vm_area_cachep, GFP_KERNEL); + + if (new) { + *new = *orig; + INIT_LIST_HEAD(&new->anon_vma_chain); + } + return new; } void vm_area_free(struct vm_area_struct *vma) @@ -473,8 +479,6 @@ static __latent_entropy int dup_mmap(struct mm_struct *mm, tmp = vm_area_dup(mpnt); if (!tmp) goto fail_nomem; - *tmp = *mpnt; - INIT_LIST_HEAD(&tmp->anon_vma_chain); retval = vma_dup_policy(mpnt, tmp); if (retval) goto fail_nomem_policy; diff --git a/mm/mmap.c b/mm/mmap.c index 4286ad2dd1f5..b0ed8ce1b67e 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -2624,11 +2624,6 @@ int __split_vma(struct mm_struct *mm, struct vm_area_struct *vma, if (!new) return -ENOMEM; - /* most fields are the same, copy all, and then fixup */ - *new = *vma; - - INIT_LIST_HEAD(&new->anon_vma_chain); - if (new_below) new->vm_end = addr; else { @@ -3205,13 +3200,11 @@ struct vm_area_struct *copy_vma(struct vm_area_struct **vmap, new_vma = vm_area_dup(vma); if (!new_vma) goto out; - *new_vma = *vma; new_vma->vm_start = addr; new_vma->vm_end = addr + len; new_vma->vm_pgoff = pgoff; if (vma_dup_policy(vma, new_vma)) goto out_free_vma; - INIT_LIST_HEAD(&new_vma->anon_vma_chain); if (anon_vma_clone(new_vma, vma)) goto out_free_mempol; if (new_vma->vm_file) diff --git a/mm/nommu.c b/mm/nommu.c index 006e3fe65017..c2560e9cc803 100644 --- a/mm/nommu.c +++ b/mm/nommu.c @@ -1476,7 +1476,6 @@ int split_vma(struct mm_struct *mm, struct vm_area_struct *vma, } /* most fields are the same, copy all, and then fixup */ - *new = *vma; *region = *vma->vm_region; new->vm_region = region; -- cgit v1.2.3 From 490fc053865c9cc40f1085ef8a5504f5341f79d2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 21 Jul 2018 15:24:03 -0700 Subject: mm: make vm_area_alloc() initialize core fields Like vm_area_dup(), it initializes the anon_vma_chain head, and the basic mm pointer. The rest of the fields end up being different for different users, although the plan is to also initialize the 'vm_ops' field to a dummy entry. Signed-off-by: Linus Torvalds --- arch/ia64/kernel/perfmon.c | 4 +--- arch/ia64/mm/init.c | 8 ++------ fs/exec.c | 4 +--- include/linux/mm.h | 2 +- kernel/fork.c | 10 ++++++++-- mm/mmap.c | 12 +++--------- mm/nommu.c | 3 +-- 7 files changed, 17 insertions(+), 26 deletions(-) diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index e859246badca..46bff1661836 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -2278,17 +2278,15 @@ pfm_smpl_buffer_alloc(struct task_struct *task, struct file *filp, pfm_context_t DPRINT(("smpl_buf @%p\n", smpl_buf)); /* allocate vma */ - vma = vm_area_alloc(); + vma = vm_area_alloc(mm); if (!vma) { DPRINT(("Cannot allocate vma\n")); goto error_kmem; } - INIT_LIST_HEAD(&vma->anon_vma_chain); /* * partially initialize the vma for the sampling buffer */ - vma->vm_mm = mm; vma->vm_file = get_file(filp); vma->vm_flags = VM_READ|VM_MAYREAD|VM_DONTEXPAND|VM_DONTDUMP; vma->vm_page_prot = PAGE_READONLY; /* XXX may need to change */ diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c index 3f2321bffb72..bdb14a369137 100644 --- a/arch/ia64/mm/init.c +++ b/arch/ia64/mm/init.c @@ -114,10 +114,8 @@ ia64_init_addr_space (void) * the problem. When the process attempts to write to the register backing store * for the first time, it will get a SEGFAULT in this case. */ - vma = vm_area_alloc(); + vma = vm_area_alloc(current->mm); if (vma) { - INIT_LIST_HEAD(&vma->anon_vma_chain); - vma->vm_mm = current->mm; vma->vm_start = current->thread.rbs_bot & PAGE_MASK; vma->vm_end = vma->vm_start + PAGE_SIZE; vma->vm_flags = VM_DATA_DEFAULT_FLAGS|VM_GROWSUP|VM_ACCOUNT; @@ -133,10 +131,8 @@ ia64_init_addr_space (void) /* map NaT-page at address zero to speed up speculative dereferencing of NULL: */ if (!(current->personality & MMAP_PAGE_ZERO)) { - vma = vm_area_alloc(); + vma = vm_area_alloc(current->mm); if (vma) { - INIT_LIST_HEAD(&vma->anon_vma_chain); - vma->vm_mm = current->mm; vma->vm_end = PAGE_SIZE; vma->vm_page_prot = __pgprot(pgprot_val(PAGE_READONLY) | _PAGE_MA_NAT); vma->vm_flags = VM_READ | VM_MAYREAD | VM_IO | diff --git a/fs/exec.c b/fs/exec.c index 9bd83989ea25..72e961a62adb 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -290,7 +290,7 @@ static int __bprm_mm_init(struct linux_binprm *bprm) struct vm_area_struct *vma = NULL; struct mm_struct *mm = bprm->mm; - bprm->vma = vma = vm_area_alloc(); + bprm->vma = vma = vm_area_alloc(mm); if (!vma) return -ENOMEM; @@ -298,7 +298,6 @@ static int __bprm_mm_init(struct linux_binprm *bprm) err = -EINTR; goto err_free; } - vma->vm_mm = mm; /* * Place the stack at the largest stack address the architecture @@ -311,7 +310,6 @@ static int __bprm_mm_init(struct linux_binprm *bprm) vma->vm_start = vma->vm_end - PAGE_SIZE; vma->vm_flags = VM_SOFTDIRTY | VM_STACK_FLAGS | VM_STACK_INCOMPLETE_SETUP; vma->vm_page_prot = vm_get_page_prot(vma->vm_flags); - INIT_LIST_HEAD(&vma->anon_vma_chain); err = insert_vm_struct(mm, vma); if (err) diff --git a/include/linux/mm.h b/include/linux/mm.h index de2fd86c6154..d3a3842316b8 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -155,7 +155,7 @@ extern int overcommit_kbytes_handler(struct ctl_table *, int, void __user *, * mmap() functions). */ -struct vm_area_struct *vm_area_alloc(void); +struct vm_area_struct *vm_area_alloc(struct mm_struct *); struct vm_area_struct *vm_area_dup(struct vm_area_struct *); void vm_area_free(struct vm_area_struct *); diff --git a/kernel/fork.c b/kernel/fork.c index 67253e41bfb0..a191c05e757d 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -308,9 +308,15 @@ static struct kmem_cache *vm_area_cachep; /* SLAB cache for mm_struct structures (tsk->mm) */ static struct kmem_cache *mm_cachep; -struct vm_area_struct *vm_area_alloc(void) +struct vm_area_struct *vm_area_alloc(struct mm_struct *mm) { - return kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL); + struct vm_area_struct *vma = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL); + + if (vma) { + vma->vm_mm = mm; + INIT_LIST_HEAD(&vma->anon_vma_chain); + } + return vma; } struct vm_area_struct *vm_area_dup(struct vm_area_struct *orig) diff --git a/mm/mmap.c b/mm/mmap.c index b0ed8ce1b67e..ff1944d8d458 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -1729,19 +1729,17 @@ unsigned long mmap_region(struct file *file, unsigned long addr, * specific mapper. the address has already been validated, but * not unmapped, but the maps are removed from the list. */ - vma = vm_area_alloc(); + vma = vm_area_alloc(mm); if (!vma) { error = -ENOMEM; goto unacct_error; } - vma->vm_mm = mm; vma->vm_start = addr; vma->vm_end = addr + len; vma->vm_flags = vm_flags; vma->vm_page_prot = vm_get_page_prot(vm_flags); vma->vm_pgoff = pgoff; - INIT_LIST_HEAD(&vma->anon_vma_chain); if (file) { if (vm_flags & VM_DENYWRITE) { @@ -2979,14 +2977,12 @@ static int do_brk_flags(unsigned long addr, unsigned long len, unsigned long fla /* * create a vma struct for an anonymous mapping */ - vma = vm_area_alloc(); + vma = vm_area_alloc(mm); if (!vma) { vm_unacct_memory(len >> PAGE_SHIFT); return -ENOMEM; } - INIT_LIST_HEAD(&vma->anon_vma_chain); - vma->vm_mm = mm; vma->vm_start = addr; vma->vm_end = addr + len; vma->vm_pgoff = pgoff; @@ -3343,12 +3339,10 @@ static struct vm_area_struct *__install_special_mapping( int ret; struct vm_area_struct *vma; - vma = vm_area_alloc(); + vma = vm_area_alloc(mm); if (unlikely(vma == NULL)) return ERR_PTR(-ENOMEM); - INIT_LIST_HEAD(&vma->anon_vma_chain); - vma->vm_mm = mm; vma->vm_start = addr; vma->vm_end = addr + len; diff --git a/mm/nommu.c b/mm/nommu.c index c2560e9cc803..1d22fdbf7d7c 100644 --- a/mm/nommu.c +++ b/mm/nommu.c @@ -1204,7 +1204,7 @@ unsigned long do_mmap(struct file *file, if (!region) goto error_getting_region; - vma = vm_area_alloc(); + vma = vm_area_alloc(current->mm); if (!vma) goto error_getting_vma; @@ -1212,7 +1212,6 @@ unsigned long do_mmap(struct file *file, region->vm_flags = vm_flags; region->vm_pgoff = pgoff; - INIT_LIST_HEAD(&vma->anon_vma_chain); vma->vm_flags = vm_flags; vma->vm_pgoff = pgoff; -- cgit v1.2.3 From 64119e05f7b31e83e2555f6782e6cdc8f81c63f4 Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Thu, 19 Jul 2018 10:27:13 +0800 Subject: net: caif: Add a missing rcu_read_unlock() in caif_flow_cb Add a missing rcu_read_unlock in the error path Fixes: c95567c80352 ("caif: added check for potential null return") Signed-off-by: YueHaibing Signed-off-by: David S. Miller --- net/caif/caif_dev.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/caif/caif_dev.c b/net/caif/caif_dev.c index e0adcd123f48..711d7156efd8 100644 --- a/net/caif/caif_dev.c +++ b/net/caif/caif_dev.c @@ -131,8 +131,10 @@ static void caif_flow_cb(struct sk_buff *skb) caifd = caif_get(skb->dev); WARN_ON(caifd == NULL); - if (caifd == NULL) + if (!caifd) { + rcu_read_unlock(); return; + } caifd_hold(caifd); rcu_read_unlock(); -- cgit v1.2.3 From 4ad95a93a702ec4f4fb5159b822797ba67b8cbbe Mon Sep 17 00:00:00 2001 From: Sudarsana Reddy Kalluru Date: Wed, 18 Jul 2018 22:50:02 -0700 Subject: qed: Fix link flap issue due to mismatching EEE capabilities. Apparently, MFW publishes EEE capabilities even for Fiber-boards that don't support them, and later since qed internally sets adv_caps it would cause link-flap avoidance (LFA) to fail when driver would initiate the link. This in turn delays the link, causing traffic to fail. Driver has been modified to not to ask MFW for any EEE config if EEE isn't to be enabled. Fixes: 645874e5 ("qed: Add support for Energy efficient ethernet.") Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Ariel Elior Signed-off-by: Michal Kalderon Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_mcp.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_mcp.c b/drivers/net/ethernet/qlogic/qed/qed_mcp.c index 9d9e533bccdc..cace28365189 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_mcp.c +++ b/drivers/net/ethernet/qlogic/qed/qed_mcp.c @@ -1308,9 +1308,15 @@ int qed_mcp_set_link(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt, bool b_up) phy_cfg.pause |= (params->pause.forced_tx) ? ETH_PAUSE_TX : 0; phy_cfg.adv_speed = params->speed.advertised_speeds; phy_cfg.loopback_mode = params->loopback_mode; - if (p_hwfn->mcp_info->capabilities & FW_MB_PARAM_FEATURE_SUPPORT_EEE) { - if (params->eee.enable) - phy_cfg.eee_cfg |= EEE_CFG_EEE_ENABLED; + + /* There are MFWs that share this capability regardless of whether + * this is feasible or not. And given that at the very least adv_caps + * would be set internally by qed, we want to make sure LFA would + * still work. + */ + if ((p_hwfn->mcp_info->capabilities & + FW_MB_PARAM_FEATURE_SUPPORT_EEE) && params->eee.enable) { + phy_cfg.eee_cfg |= EEE_CFG_EEE_ENABLED; if (params->eee.tx_lpi_enable) phy_cfg.eee_cfg |= EEE_CFG_TX_LPI; if (params->eee.adv_caps & QED_EEE_1G_ADV) -- cgit v1.2.3 From 58874c7b246109d8efb2b0099d1aa296d6bfc3fa Mon Sep 17 00:00:00 2001 From: Sudarsana Reddy Kalluru Date: Wed, 18 Jul 2018 22:50:03 -0700 Subject: qed: Fix possible race for the link state value. There's a possible race where driver can read link status in mid-transition and see that virtual-link is up yet speed is 0. Since in this mid-transition we're guaranteed to see a mailbox from MFW soon, we can afford to treat this as link down. Fixes: cc875c2e ("qed: Add link support") Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Ariel Elior Signed-off-by: Michal Kalderon Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_mcp.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/qlogic/qed/qed_mcp.c b/drivers/net/ethernet/qlogic/qed/qed_mcp.c index cace28365189..cdd645024a32 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_mcp.c +++ b/drivers/net/ethernet/qlogic/qed/qed_mcp.c @@ -1211,6 +1211,7 @@ static void qed_mcp_handle_link_change(struct qed_hwfn *p_hwfn, break; default: p_link->speed = 0; + p_link->link_up = 0; } if (p_link->link_up && p_link->speed) -- cgit v1.2.3 From 25c020a90919632b3425c19dc09188d56b9ed59a Mon Sep 17 00:00:00 2001 From: Sudarsana Reddy Kalluru Date: Wed, 18 Jul 2018 22:50:04 -0700 Subject: qed: Correct Multicast API to reflect existence of 256 approximate buckets. FW hsi contains 256 approximation buckets which are split in ramrod into eight u32 values, but driver is using eight 'unsigned long' variables. This patch fixes the mcast logic by making the API utilize u32. Fixes: 83aeb933 ("qed*: Trivial modifications") Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Ariel Elior Signed-off-by: Michal Kalderon Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_l2.c | 15 +++++++-------- drivers/net/ethernet/qlogic/qed/qed_l2.h | 2 +- drivers/net/ethernet/qlogic/qed/qed_sriov.c | 2 +- drivers/net/ethernet/qlogic/qed/qed_vf.c | 4 ++-- drivers/net/ethernet/qlogic/qed/qed_vf.h | 7 ++++++- 5 files changed, 17 insertions(+), 13 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_l2.c b/drivers/net/ethernet/qlogic/qed/qed_l2.c index 99973e10b179..5ede6408649d 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_l2.c +++ b/drivers/net/ethernet/qlogic/qed/qed_l2.c @@ -665,7 +665,7 @@ qed_sp_update_mcast_bin(struct qed_hwfn *p_hwfn, p_ramrod->common.update_approx_mcast_flg = 1; for (i = 0; i < ETH_MULTICAST_MAC_BINS_IN_REGS; i++) { - u32 *p_bins = (u32 *)p_params->bins; + u32 *p_bins = p_params->bins; p_ramrod->approx_mcast.bins[i] = cpu_to_le32(p_bins[i]); } @@ -1476,8 +1476,8 @@ qed_sp_eth_filter_mcast(struct qed_hwfn *p_hwfn, enum spq_mode comp_mode, struct qed_spq_comp_cb *p_comp_data) { - unsigned long bins[ETH_MULTICAST_MAC_BINS_IN_REGS]; struct vport_update_ramrod_data *p_ramrod = NULL; + u32 bins[ETH_MULTICAST_MAC_BINS_IN_REGS]; struct qed_spq_entry *p_ent = NULL; struct qed_sp_init_data init_data; u8 abs_vport_id = 0; @@ -1513,26 +1513,25 @@ qed_sp_eth_filter_mcast(struct qed_hwfn *p_hwfn, /* explicitly clear out the entire vector */ memset(&p_ramrod->approx_mcast.bins, 0, sizeof(p_ramrod->approx_mcast.bins)); - memset(bins, 0, sizeof(unsigned long) * - ETH_MULTICAST_MAC_BINS_IN_REGS); + memset(bins, 0, sizeof(bins)); /* filter ADD op is explicit set op and it removes * any existing filters for the vport */ if (p_filter_cmd->opcode == QED_FILTER_ADD) { for (i = 0; i < p_filter_cmd->num_mc_addrs; i++) { - u32 bit; + u32 bit, nbits; bit = qed_mcast_bin_from_mac(p_filter_cmd->mac[i]); - __set_bit(bit, bins); + nbits = sizeof(u32) * BITS_PER_BYTE; + bins[bit / nbits] |= 1 << (bit % nbits); } /* Convert to correct endianity */ for (i = 0; i < ETH_MULTICAST_MAC_BINS_IN_REGS; i++) { struct vport_update_ramrod_mcast *p_ramrod_bins; - u32 *p_bins = (u32 *)bins; p_ramrod_bins = &p_ramrod->approx_mcast; - p_ramrod_bins->bins[i] = cpu_to_le32(p_bins[i]); + p_ramrod_bins->bins[i] = cpu_to_le32(bins[i]); } } diff --git a/drivers/net/ethernet/qlogic/qed/qed_l2.h b/drivers/net/ethernet/qlogic/qed/qed_l2.h index 806a8da257e9..8d80f1095d17 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_l2.h +++ b/drivers/net/ethernet/qlogic/qed/qed_l2.h @@ -215,7 +215,7 @@ struct qed_sp_vport_update_params { u8 anti_spoofing_en; u8 update_accept_any_vlan_flg; u8 accept_any_vlan; - unsigned long bins[8]; + u32 bins[8]; struct qed_rss_params *rss_params; struct qed_filter_accept_flags accept_flags; struct qed_sge_tpa_params *sge_tpa_params; diff --git a/drivers/net/ethernet/qlogic/qed/qed_sriov.c b/drivers/net/ethernet/qlogic/qed/qed_sriov.c index fd59cf45f4be..26e918d7f2f9 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_sriov.c +++ b/drivers/net/ethernet/qlogic/qed/qed_sriov.c @@ -2831,7 +2831,7 @@ qed_iov_vp_update_mcast_bin_param(struct qed_hwfn *p_hwfn, p_data->update_approx_mcast_flg = 1; memcpy(p_data->bins, p_mcast_tlv->bins, - sizeof(unsigned long) * ETH_MULTICAST_MAC_BINS_IN_REGS); + sizeof(u32) * ETH_MULTICAST_MAC_BINS_IN_REGS); *tlvs_mask |= 1 << QED_IOV_VP_UPDATE_MCAST; } diff --git a/drivers/net/ethernet/qlogic/qed/qed_vf.c b/drivers/net/ethernet/qlogic/qed/qed_vf.c index 2d7fcd6a0777..be6ddde1a104 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_vf.c +++ b/drivers/net/ethernet/qlogic/qed/qed_vf.c @@ -1126,7 +1126,7 @@ int qed_vf_pf_vport_update(struct qed_hwfn *p_hwfn, resp_size += sizeof(struct pfvf_def_resp_tlv); memcpy(p_mcast_tlv->bins, p_params->bins, - sizeof(unsigned long) * ETH_MULTICAST_MAC_BINS_IN_REGS); + sizeof(u32) * ETH_MULTICAST_MAC_BINS_IN_REGS); } update_rx = p_params->accept_flags.update_rx_mode_config; @@ -1272,7 +1272,7 @@ void qed_vf_pf_filter_mcast(struct qed_hwfn *p_hwfn, u32 bit; bit = qed_mcast_bin_from_mac(p_filter_cmd->mac[i]); - __set_bit(bit, sp_params.bins); + sp_params.bins[bit / 32] |= 1 << (bit % 32); } } diff --git a/drivers/net/ethernet/qlogic/qed/qed_vf.h b/drivers/net/ethernet/qlogic/qed/qed_vf.h index 4f05d5eb3cf5..033409db86ae 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_vf.h +++ b/drivers/net/ethernet/qlogic/qed/qed_vf.h @@ -392,7 +392,12 @@ struct vfpf_vport_update_mcast_bin_tlv { struct channel_tlv tl; u8 padding[4]; - u64 bins[8]; + /* There are only 256 approx bins, and in HSI they're divided into + * 32-bit values. As old VFs used to set-bit to the values on its side, + * the upper half of the array is never expected to contain any data. + */ + u64 bins[4]; + u64 obsolete_bins[4]; }; struct vfpf_vport_update_accept_param_tlv { -- cgit v1.2.3 From 215d08a85b9acf5e1fe9dbf50f1774cde333efef Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Thu, 19 Jul 2018 08:15:16 +0200 Subject: net: phy: consider PHY_IGNORE_INTERRUPT in phy_start_aneg_priv The situation described in the comment can occur also with PHY_IGNORE_INTERRUPT, therefore change the condition to include it. Fixes: f555f34fdc58 ("net: phy: fix auto-negotiation stall due to unavailable interrupt") Signed-off-by: Heiner Kallweit Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/phy/phy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 537297d2b4b4..6c9b24fe3148 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -514,7 +514,7 @@ static int phy_start_aneg_priv(struct phy_device *phydev, bool sync) * negotiation may already be done and aneg interrupt may not be * generated. */ - if (phy_interrupt_is_valid(phydev) && (phydev->state == PHY_AN)) { + if (phydev->irq != PHY_POLL && phydev->state == PHY_AN) { err = phy_aneg_done(phydev); if (err > 0) { trigger = true; -- cgit v1.2.3 From f95de8aa9f824d96421cb7ca81552b4ad8768a31 Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Thu, 19 Jul 2018 15:56:59 +0800 Subject: bpfilter: Fix mismatch in function argument types Fix following warning: net/ipv4/bpfilter/sockopt.c:28:5: error: symbol 'bpfilter_ip_set_sockopt' redeclared with different type net/ipv4/bpfilter/sockopt.c:34:5: error: symbol 'bpfilter_ip_get_sockopt' redeclared with different type Signed-off-by: YueHaibing Acked-by: Martin KaFai Lau Acked-by: Daniel Borkmann Signed-off-by: David S. Miller --- include/linux/bpfilter.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/linux/bpfilter.h b/include/linux/bpfilter.h index 687b1760bb9f..f02cee0225d4 100644 --- a/include/linux/bpfilter.h +++ b/include/linux/bpfilter.h @@ -5,10 +5,10 @@ #include struct sock; -int bpfilter_ip_set_sockopt(struct sock *sk, int optname, char *optval, +int bpfilter_ip_set_sockopt(struct sock *sk, int optname, char __user *optval, unsigned int optlen); -int bpfilter_ip_get_sockopt(struct sock *sk, int optname, char *optval, - int *optlen); +int bpfilter_ip_get_sockopt(struct sock *sk, int optname, char __user *optval, + int __user *optlen); extern int (*bpfilter_process_sockopt)(struct sock *sk, int optname, char __user *optval, unsigned int optlen, bool is_set); -- cgit v1.2.3 From 24b711edfc34bc45777a3f068812b7d1ed004a5d Mon Sep 17 00:00:00 2001 From: David Ahern Date: Thu, 19 Jul 2018 12:41:18 -0700 Subject: net/ipv6: Fix linklocal to global address with VRF Example setup: host: ip -6 addr add dev eth1 2001:db8:104::4 where eth1 is enslaved to a VRF switch: ip -6 ro add 2001:db8:104::4/128 dev br1 where br1 only has an LLA ping6 2001:db8:104::4 ssh 2001:db8:104::4 (NOTE: UDP works fine if the PKTINFO has the address set to the global address and ifindex is set to the index of eth1 with a destination an LLA). For ICMP, icmp6_iif needs to be updated to check if skb->dev is an L3 master. If it is then return the ifindex from rt6i_idev similar to what is done for loopback. For TCP, restore the original tcp_v6_iif definition which is needed in most places and add a new tcp_v6_iif_l3_slave that considers the l3_slave variability. This latter check is only needed for socket lookups. Fixes: 9ff74384600a ("net: vrf: Handle ipv6 multicast and link-local addresses") Signed-off-by: David Ahern Signed-off-by: David S. Miller --- include/net/tcp.h | 5 +++++ net/ipv6/icmp.c | 5 +++-- net/ipv6/tcp_ipv6.c | 6 ++++-- 3 files changed, 12 insertions(+), 4 deletions(-) diff --git a/include/net/tcp.h b/include/net/tcp.h index 25116ec02087..cd3ecda9386a 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -840,6 +840,11 @@ static inline void bpf_compute_data_end_sk_skb(struct sk_buff *skb) * as TCP moves IP6CB into a different location in skb->cb[] */ static inline int tcp_v6_iif(const struct sk_buff *skb) +{ + return TCP_SKB_CB(skb)->header.h6.iif; +} + +static inline int tcp_v6_iif_l3_slave(const struct sk_buff *skb) { bool l3_slave = ipv6_l3mdev_skb(TCP_SKB_CB(skb)->header.h6.flags); diff --git a/net/ipv6/icmp.c b/net/ipv6/icmp.c index be491bf6ab6e..ef2505aefc15 100644 --- a/net/ipv6/icmp.c +++ b/net/ipv6/icmp.c @@ -402,9 +402,10 @@ static int icmp6_iif(const struct sk_buff *skb) /* for local traffic to local address, skb dev is the loopback * device. Check if there is a dst attached to the skb and if so - * get the real device index. + * get the real device index. Same is needed for replies to a link + * local address on a device enslaved to an L3 master device */ - if (unlikely(iif == LOOPBACK_IFINDEX)) { + if (unlikely(iif == LOOPBACK_IFINDEX || netif_is_l3_master(skb->dev))) { const struct rt6_info *rt6 = skb_rt6_info(skb); if (rt6) diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index 7efa9fd7e109..03e6b7a2bc53 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -938,7 +938,8 @@ static void tcp_v6_send_reset(const struct sock *sk, struct sk_buff *skb) &tcp_hashinfo, NULL, 0, &ipv6h->saddr, th->source, &ipv6h->daddr, - ntohs(th->source), tcp_v6_iif(skb), + ntohs(th->source), + tcp_v6_iif_l3_slave(skb), tcp_v6_sdif(skb)); if (!sk1) goto out; @@ -1609,7 +1610,8 @@ do_time_wait: skb, __tcp_hdrlen(th), &ipv6_hdr(skb)->saddr, th->source, &ipv6_hdr(skb)->daddr, - ntohs(th->dest), tcp_v6_iif(skb), + ntohs(th->dest), + tcp_v6_iif_l3_slave(skb), sdif); if (sk2) { struct inet_timewait_sock *tw = inet_twsk(sk); -- cgit v1.2.3 From ff907a11a0d68a749ce1a321f4505c03bf72190c Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 19 Jul 2018 16:04:38 -0700 Subject: net: skb_segment() should not return NULL syzbot caught a NULL deref [1], caused by skb_segment() skb_segment() has many "goto err;" that assume the @err variable contains -ENOMEM. A successful call to __skb_linearize() should not clear @err, otherwise a subsequent memory allocation error could return NULL. While we are at it, we might use -EINVAL instead of -ENOMEM when MAX_SKB_FRAGS limit is reached. [1] kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN CPU: 0 PID: 13285 Comm: syz-executor3 Not tainted 4.18.0-rc4+ #146 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:tcp_gso_segment+0x3dc/0x1780 net/ipv4/tcp_offload.c:106 Code: f0 ff ff 0f 87 1c fd ff ff e8 00 88 0b fb 48 8b 75 d0 48 b9 00 00 00 00 00 fc ff df 48 8d be 90 00 00 00 48 89 f8 48 c1 e8 03 <0f> b6 14 08 48 8d 86 94 00 00 00 48 89 c6 83 e0 07 48 c1 ee 03 0f RSP: 0018:ffff88019b7fd060 EFLAGS: 00010206 RAX: 0000000000000012 RBX: 0000000000000020 RCX: dffffc0000000000 RDX: 0000000000040000 RSI: 0000000000000000 RDI: 0000000000000090 RBP: ffff88019b7fd0f0 R08: ffff88019510e0c0 R09: ffffed003b5c46d6 R10: ffffed003b5c46d6 R11: ffff8801dae236b3 R12: 0000000000000001 R13: ffff8801d6c581f4 R14: 0000000000000000 R15: ffff8801d6c58128 FS: 00007fcae64d6700(0000) GS:ffff8801dae00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004e8664 CR3: 00000001b669b000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: tcp4_gso_segment+0x1c3/0x440 net/ipv4/tcp_offload.c:54 inet_gso_segment+0x64e/0x12d0 net/ipv4/af_inet.c:1342 inet_gso_segment+0x64e/0x12d0 net/ipv4/af_inet.c:1342 skb_mac_gso_segment+0x3b5/0x740 net/core/dev.c:2792 __skb_gso_segment+0x3c3/0x880 net/core/dev.c:2865 skb_gso_segment include/linux/netdevice.h:4099 [inline] validate_xmit_skb+0x640/0xf30 net/core/dev.c:3104 __dev_queue_xmit+0xc14/0x3910 net/core/dev.c:3561 dev_queue_xmit+0x17/0x20 net/core/dev.c:3602 neigh_hh_output include/net/neighbour.h:473 [inline] neigh_output include/net/neighbour.h:481 [inline] ip_finish_output2+0x1063/0x1860 net/ipv4/ip_output.c:229 ip_finish_output+0x841/0xfa0 net/ipv4/ip_output.c:317 NF_HOOK_COND include/linux/netfilter.h:276 [inline] ip_output+0x223/0x880 net/ipv4/ip_output.c:405 dst_output include/net/dst.h:444 [inline] ip_local_out+0xc5/0x1b0 net/ipv4/ip_output.c:124 iptunnel_xmit+0x567/0x850 net/ipv4/ip_tunnel_core.c:91 ip_tunnel_xmit+0x1598/0x3af1 net/ipv4/ip_tunnel.c:778 ipip_tunnel_xmit+0x264/0x2c0 net/ipv4/ipip.c:308 __netdev_start_xmit include/linux/netdevice.h:4148 [inline] netdev_start_xmit include/linux/netdevice.h:4157 [inline] xmit_one net/core/dev.c:3034 [inline] dev_hard_start_xmit+0x26c/0xc30 net/core/dev.c:3050 __dev_queue_xmit+0x29ef/0x3910 net/core/dev.c:3569 dev_queue_xmit+0x17/0x20 net/core/dev.c:3602 neigh_direct_output+0x15/0x20 net/core/neighbour.c:1403 neigh_output include/net/neighbour.h:483 [inline] ip_finish_output2+0xa67/0x1860 net/ipv4/ip_output.c:229 ip_finish_output+0x841/0xfa0 net/ipv4/ip_output.c:317 NF_HOOK_COND include/linux/netfilter.h:276 [inline] ip_output+0x223/0x880 net/ipv4/ip_output.c:405 dst_output include/net/dst.h:444 [inline] ip_local_out+0xc5/0x1b0 net/ipv4/ip_output.c:124 ip_queue_xmit+0x9df/0x1f80 net/ipv4/ip_output.c:504 tcp_transmit_skb+0x1bf9/0x3f10 net/ipv4/tcp_output.c:1168 tcp_write_xmit+0x1641/0x5c20 net/ipv4/tcp_output.c:2363 __tcp_push_pending_frames+0xb2/0x290 net/ipv4/tcp_output.c:2536 tcp_push+0x638/0x8c0 net/ipv4/tcp.c:735 tcp_sendmsg_locked+0x2ec5/0x3f00 net/ipv4/tcp.c:1410 tcp_sendmsg+0x2f/0x50 net/ipv4/tcp.c:1447 inet_sendmsg+0x1a1/0x690 net/ipv4/af_inet.c:798 sock_sendmsg_nosec net/socket.c:641 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:651 __sys_sendto+0x3d7/0x670 net/socket.c:1797 __do_sys_sendto net/socket.c:1809 [inline] __se_sys_sendto net/socket.c:1805 [inline] __x64_sys_sendto+0xe1/0x1a0 net/socket.c:1805 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x455ab9 Code: 1d ba fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb b9 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fcae64d5c68 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007fcae64d66d4 RCX: 0000000000455ab9 RDX: 0000000000000001 RSI: 0000000020000200 RDI: 0000000000000013 RBP: 000000000072bea0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000014 R13: 00000000004c1145 R14: 00000000004d1818 R15: 0000000000000006 Modules linked in: Dumping ftrace buffer: (ftrace buffer empty) Fixes: ddff00d42043 ("net: Move skb_has_shared_frag check out of GRE code and into segmentation") Signed-off-by: Eric Dumazet Cc: Alexander Duyck Reported-by: syzbot Acked-by: Alexander Duyck Signed-off-by: David S. Miller --- net/core/skbuff.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 8e51f8555e11..fb35b62af272 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -3720,6 +3720,7 @@ normal: net_warn_ratelimited( "skb_segment: too many frags: %u %u\n", pos, mss); + err = -EINVAL; goto err; } @@ -3753,11 +3754,10 @@ skip_fraglist: perform_csum_check: if (!csum) { - if (skb_has_shared_frag(nskb)) { - err = __skb_linearize(nskb); - if (err) - goto err; - } + if (skb_has_shared_frag(nskb) && + __skb_linearize(nskb)) + goto err; + if (!nskb->remcsum_offload) nskb->ip_summed = CHECKSUM_NONE; SKB_GSO_CB(nskb)->csum = -- cgit v1.2.3 From 3d82475ad46c0b65f2618b5f2bbb4cadbb5ac5d8 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Fri, 20 Jul 2018 11:53:15 +0200 Subject: net: dsa: mv88e6xxx: fix races between lock and irq freeing MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit free_irq() waits until all handlers for this IRQ have completed. As the relevant handler (mv88e6xxx_g1_irq_thread_fn()) takes the chip's reg_lock it might never return if the thread calling free_irq() holds this lock. For the same reason kthread_cancel_delayed_work_sync() in the polling case must not hold this lock. Also first free the irq (or stop the worker respectively) such that mv88e6xxx_g1_irq_thread_work() isn't called any more before the irq mappings are dropped in mv88e6xxx_g1_irq_free_common() to prevent the worker thread to call handle_nested_irq(0) which results in a NULL-pointer exception. Signed-off-by: Uwe Kleine-König Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx/chip.c | 21 +++++++++++++-------- 1 file changed, 13 insertions(+), 8 deletions(-) diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index 437cd6eb4faa..9ef07a06aceb 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -343,6 +343,7 @@ static const struct irq_domain_ops mv88e6xxx_g1_irq_domain_ops = { .xlate = irq_domain_xlate_twocell, }; +/* To be called with reg_lock held */ static void mv88e6xxx_g1_irq_free_common(struct mv88e6xxx_chip *chip) { int irq, virq; @@ -362,9 +363,15 @@ static void mv88e6xxx_g1_irq_free_common(struct mv88e6xxx_chip *chip) static void mv88e6xxx_g1_irq_free(struct mv88e6xxx_chip *chip) { - mv88e6xxx_g1_irq_free_common(chip); - + /* + * free_irq must be called without reg_lock taken because the irq + * handler takes this lock, too. + */ free_irq(chip->irq, chip); + + mutex_lock(&chip->reg_lock); + mv88e6xxx_g1_irq_free_common(chip); + mutex_unlock(&chip->reg_lock); } static int mv88e6xxx_g1_irq_setup_common(struct mv88e6xxx_chip *chip) @@ -469,10 +476,12 @@ static int mv88e6xxx_irq_poll_setup(struct mv88e6xxx_chip *chip) static void mv88e6xxx_irq_poll_free(struct mv88e6xxx_chip *chip) { - mv88e6xxx_g1_irq_free_common(chip); - kthread_cancel_delayed_work_sync(&chip->irq_poll_work); kthread_destroy_worker(chip->kworker); + + mutex_lock(&chip->reg_lock); + mv88e6xxx_g1_irq_free_common(chip); + mutex_unlock(&chip->reg_lock); } int mv88e6xxx_wait(struct mv88e6xxx_chip *chip, int addr, int reg, u16 mask) @@ -4506,12 +4515,10 @@ out_g2_irq: if (chip->info->g2_irqs > 0) mv88e6xxx_g2_irq_free(chip); out_g1_irq: - mutex_lock(&chip->reg_lock); if (chip->irq > 0) mv88e6xxx_g1_irq_free(chip); else mv88e6xxx_irq_poll_free(chip); - mutex_unlock(&chip->reg_lock); out: if (pdata) dev_put(pdata->netdev); @@ -4539,12 +4546,10 @@ static void mv88e6xxx_remove(struct mdio_device *mdiodev) if (chip->info->g2_irqs > 0) mv88e6xxx_g2_irq_free(chip); - mutex_lock(&chip->reg_lock); if (chip->irq > 0) mv88e6xxx_g1_irq_free(chip); else mv88e6xxx_irq_poll_free(chip); - mutex_unlock(&chip->reg_lock); } static const struct of_device_id mv88e6xxx_of_match[] = { -- cgit v1.2.3 From 08d3ffcc0cfaba36f6b86fd568cc3bc773061fa6 Mon Sep 17 00:00:00 2001 From: Hangbin Liu Date: Fri, 20 Jul 2018 14:04:27 +0800 Subject: multicast: do not restore deleted record source filter mode to new one There are two scenarios that we will restore deleted records. The first is when device down and up(or unmap/remap). In this scenario the new filter mode is same with previous one. Because we get it from in_dev->mc_list and we do not touch it during device down and up. The other scenario is when a new socket join a group which was just delete and not finish sending status reports. In this scenario, we should use the current filter mode instead of restore old one. Here are 4 cases in total. old_socket new_socket before_fix after_fix IN(A) IN(A) ALLOW(A) ALLOW(A) IN(A) EX( ) TO_IN( ) TO_EX( ) EX( ) IN(A) TO_EX( ) ALLOW(A) EX( ) EX( ) TO_EX( ) TO_EX( ) Fixes: 24803f38a5c0b (igmp: do not remove igmp souce list info when set link down) Fixes: 1666d49e1d416 (mld: do not remove mld souce list info when set link down) Signed-off-by: Hangbin Liu Signed-off-by: David S. Miller --- net/ipv4/igmp.c | 3 +-- net/ipv6/mcast.c | 3 +-- 2 files changed, 2 insertions(+), 4 deletions(-) diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c index b3c899a630a0..28fef7d15959 100644 --- a/net/ipv4/igmp.c +++ b/net/ipv4/igmp.c @@ -1200,8 +1200,7 @@ static void igmpv3_del_delrec(struct in_device *in_dev, struct ip_mc_list *im) spin_lock_bh(&im->lock); if (pmc) { im->interface = pmc->interface; - im->sfmode = pmc->sfmode; - if (pmc->sfmode == MCAST_INCLUDE) { + if (im->sfmode == MCAST_INCLUDE) { im->tomb = pmc->tomb; im->sources = pmc->sources; for (psf = im->sources; psf; psf = psf->sf_next) diff --git a/net/ipv6/mcast.c b/net/ipv6/mcast.c index 2699be7202be..f60f310785fd 100644 --- a/net/ipv6/mcast.c +++ b/net/ipv6/mcast.c @@ -790,8 +790,7 @@ static void mld_del_delrec(struct inet6_dev *idev, struct ifmcaddr6 *im) spin_lock_bh(&im->mca_lock); if (pmc) { im->idev = pmc->idev; - im->mca_sfmode = pmc->mca_sfmode; - if (pmc->mca_sfmode == MCAST_INCLUDE) { + if (im->mca_sfmode == MCAST_INCLUDE) { im->mca_tomb = pmc->mca_tomb; im->mca_sources = pmc->mca_sources; for (psf = im->mca_sources; psf; psf = psf->sf_next) -- cgit v1.2.3 From 9b788f32bee6b0b293a4bdfca4ad4bb0206407fb Mon Sep 17 00:00:00 2001 From: Brijesh Singh Date: Fri, 20 Jul 2018 10:28:46 +0900 Subject: x86/efi: Access EFI MMIO data as unencrypted when SEV is active SEV guest fails to update the UEFI runtime variables stored in the flash. The following commit: 1379edd59673 ("x86/efi: Access EFI data as encrypted when SEV is active") unconditionally maps all the UEFI runtime data as 'encrypted' (C=1). When SEV is active the UEFI runtime data marked as EFI_MEMORY_MAPPED_IO should be mapped as 'unencrypted' so that both guest and hypervisor can access the data. Signed-off-by: Brijesh Singh Signed-off-by: Ard Biesheuvel Reviewed-by: Tom Lendacky Cc: # 4.15.x Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-efi@vger.kernel.org Fixes: 1379edd59673 ("x86/efi: Access EFI data as encrypted ...") Link: http://lkml.kernel.org/r/20180720012846.23560-2-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar --- arch/x86/platform/efi/efi_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/platform/efi/efi_64.c b/arch/x86/platform/efi/efi_64.c index 77873ce700ae..5f2eb3231607 100644 --- a/arch/x86/platform/efi/efi_64.c +++ b/arch/x86/platform/efi/efi_64.c @@ -417,7 +417,7 @@ static void __init __map_region(efi_memory_desc_t *md, u64 va) if (!(md->attribute & EFI_MEMORY_WB)) flags |= _PAGE_PCD; - if (sev_active()) + if (sev_active() && md->type != EFI_MEMORY_MAPPED_IO) flags |= _PAGE_ENC; pfn = md->phys_addr >> PAGE_SHIFT; -- cgit v1.2.3 From 6e56830776828d8ca9897fc4429eeab47c3bb432 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Fri, 20 Jul 2018 19:30:57 +0200 Subject: atl1c: reserve min skb headroom Got crash report with following backtrace: BUG: unable to handle kernel paging request at ffff8801869daffe RIP: 0010:[] [] ip6_finish_output2+0x394/0x4c0 RSP: 0018:ffff880186c83a98 EFLAGS: 00010283 RAX: ffff8801869db00e ... [] ip6_finish_output+0x8c/0xf0 [] ip6_output+0x57/0x100 [] ip6_forward+0x4b9/0x840 [] ip6_rcv_finish+0x66/0xc0 [] ipv6_rcv+0x319/0x530 [] netif_receive_skb+0x1c/0x70 [] atl1c_clean+0x1ec/0x310 [atl1c] ... The bad access is in neigh_hh_output(), at skb->data - 16 (HH_DATA_MOD). atl1c driver provided skb with no headroom, so 14 bytes (ethernet header) got pulled, but then 16 are copied. Reserve NET_SKB_PAD bytes headroom, like netdev_alloc_skb(). Compile tested only; I lack hardware. Fixes: 7b7017642199 ("atl1c: Fix misuse of netdev_alloc_skb in refilling rx ring") Signed-off-by: Florian Westphal Reviewed-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/ethernet/atheros/atl1c/atl1c_main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c index 94270f654b3b..7087b88550db 100644 --- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c @@ -1686,6 +1686,7 @@ static struct sk_buff *atl1c_alloc_skb(struct atl1c_adapter *adapter) skb = build_skb(page_address(page) + adapter->rx_page_offset, adapter->rx_frag_size); if (likely(skb)) { + skb_reserve(skb, NET_SKB_PAD); adapter->rx_page_offset += adapter->rx_frag_size; if (adapter->rx_page_offset >= PAGE_SIZE) adapter->rx_page = NULL; -- cgit v1.2.3 From 5025f7f7d506fba9b39e7fe8ca10f6f34cb9bc2d Mon Sep 17 00:00:00 2001 From: Roopa Prabhu Date: Fri, 20 Jul 2018 13:21:01 -0700 Subject: rtnetlink: add rtnl_link_state check in rtnl_configure_link rtnl_configure_link sets dev->rtnl_link_state to RTNL_LINK_INITIALIZED and unconditionally calls __dev_notify_flags to notify user-space of dev flags. current call sequence for rtnl_configure_link rtnetlink_newlink rtnl_link_ops->newlink rtnl_configure_link (unconditionally notifies userspace of default and new dev flags) If a newlink handler wants to call rtnl_configure_link early, we will end up with duplicate notifications to user-space. This patch fixes rtnl_configure_link to check rtnl_link_state and call __dev_notify_flags with gchanges = 0 if already RTNL_LINK_INITIALIZED. Later in the series, this patch will help the following sequence where a driver implementing newlink can call rtnl_configure_link to initialize the link early. makes the following call sequence work: rtnetlink_newlink rtnl_link_ops->newlink (vxlan) -> rtnl_configure_link (initializes link and notifies user-space of default dev flags) rtnl_configure_link (updates dev flags if requested by user ifm and notifies user-space of new dev flags) Signed-off-by: Roopa Prabhu Signed-off-by: David S. Miller --- net/core/rtnetlink.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c index 5ef61222fdef..e3f743c141b3 100644 --- a/net/core/rtnetlink.c +++ b/net/core/rtnetlink.c @@ -2759,9 +2759,12 @@ int rtnl_configure_link(struct net_device *dev, const struct ifinfomsg *ifm) return err; } - dev->rtnl_link_state = RTNL_LINK_INITIALIZED; - - __dev_notify_flags(dev, old_flags, ~0U); + if (dev->rtnl_link_state == RTNL_LINK_INITIALIZED) { + __dev_notify_flags(dev, old_flags, 0U); + } else { + dev->rtnl_link_state = RTNL_LINK_INITIALIZED; + __dev_notify_flags(dev, old_flags, ~0U); + } return 0; } EXPORT_SYMBOL(rtnl_configure_link); -- cgit v1.2.3 From 7431016b107c95cb5b2014aa1901fcb115f746bc Mon Sep 17 00:00:00 2001 From: Roopa Prabhu Date: Fri, 20 Jul 2018 13:21:02 -0700 Subject: vxlan: add new fdb alloc and create helpers - Add new vxlan_fdb_alloc helper - rename existing vxlan_fdb_create into vxlan_fdb_update: because it really creates or updates an existing fdb entry - move new fdb creation into a separate vxlan_fdb_create Main motivation for this change is to introduce the ability to decouple vxlan fdb creation and notify, used in a later patch. Signed-off-by: Roopa Prabhu Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 91 ++++++++++++++++++++++++++++++++++++----------------- 1 file changed, 62 insertions(+), 29 deletions(-) diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index f6bb1d54d4bd..c8d5bfffadef 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -636,8 +636,61 @@ static int vxlan_gro_complete(struct sock *sk, struct sk_buff *skb, int nhoff) return eth_gro_complete(skb, nhoff + sizeof(struct vxlanhdr)); } -/* Add new entry to forwarding table -- assumes lock held */ +static struct vxlan_fdb *vxlan_fdb_alloc(struct vxlan_dev *vxlan, + const u8 *mac, __u16 state, + __be32 src_vni, __u8 ndm_flags) +{ + struct vxlan_fdb *f; + + f = kmalloc(sizeof(*f), GFP_ATOMIC); + if (!f) + return NULL; + f->state = state; + f->flags = ndm_flags; + f->updated = f->used = jiffies; + f->vni = src_vni; + INIT_LIST_HEAD(&f->remotes); + memcpy(f->eth_addr, mac, ETH_ALEN); + + return f; +} + static int vxlan_fdb_create(struct vxlan_dev *vxlan, + const u8 *mac, union vxlan_addr *ip, + __u16 state, __be16 port, __be32 src_vni, + __be32 vni, __u32 ifindex, __u8 ndm_flags, + struct vxlan_fdb **fdb) +{ + struct vxlan_rdst *rd = NULL; + struct vxlan_fdb *f; + int rc; + + if (vxlan->cfg.addrmax && + vxlan->addrcnt >= vxlan->cfg.addrmax) + return -ENOSPC; + + netdev_dbg(vxlan->dev, "add %pM -> %pIS\n", mac, ip); + f = vxlan_fdb_alloc(vxlan, mac, state, src_vni, ndm_flags); + if (!f) + return -ENOMEM; + + rc = vxlan_fdb_append(f, ip, port, vni, ifindex, &rd); + if (rc < 0) { + kfree(f); + return rc; + } + + ++vxlan->addrcnt; + hlist_add_head_rcu(&f->hlist, + vxlan_fdb_head(vxlan, mac, src_vni)); + + *fdb = f; + + return 0; +} + +/* Add new entry to forwarding table -- assumes lock held */ +static int vxlan_fdb_update(struct vxlan_dev *vxlan, const u8 *mac, union vxlan_addr *ip, __u16 state, __u16 flags, __be16 port, __be32 src_vni, __be32 vni, @@ -687,37 +740,17 @@ static int vxlan_fdb_create(struct vxlan_dev *vxlan, if (!(flags & NLM_F_CREATE)) return -ENOENT; - if (vxlan->cfg.addrmax && - vxlan->addrcnt >= vxlan->cfg.addrmax) - return -ENOSPC; - /* Disallow replace to add a multicast entry */ if ((flags & NLM_F_REPLACE) && (is_multicast_ether_addr(mac) || is_zero_ether_addr(mac))) return -EOPNOTSUPP; netdev_dbg(vxlan->dev, "add %pM -> %pIS\n", mac, ip); - f = kmalloc(sizeof(*f), GFP_ATOMIC); - if (!f) - return -ENOMEM; - - notify = 1; - f->state = state; - f->flags = ndm_flags; - f->updated = f->used = jiffies; - f->vni = src_vni; - INIT_LIST_HEAD(&f->remotes); - memcpy(f->eth_addr, mac, ETH_ALEN); - - rc = vxlan_fdb_append(f, ip, port, vni, ifindex, &rd); - if (rc < 0) { - kfree(f); + rc = vxlan_fdb_create(vxlan, mac, ip, state, port, src_vni, + vni, ifindex, ndm_flags, &f); + if (rc < 0) return rc; - } - - ++vxlan->addrcnt; - hlist_add_head_rcu(&f->hlist, - vxlan_fdb_head(vxlan, mac, src_vni)); + notify = 1; } if (notify) { @@ -863,7 +896,7 @@ static int vxlan_fdb_add(struct ndmsg *ndm, struct nlattr *tb[], return -EAFNOSUPPORT; spin_lock_bh(&vxlan->hash_lock); - err = vxlan_fdb_create(vxlan, addr, &ip, ndm->ndm_state, flags, + err = vxlan_fdb_update(vxlan, addr, &ip, ndm->ndm_state, flags, port, src_vni, vni, ifindex, ndm->ndm_flags); spin_unlock_bh(&vxlan->hash_lock); @@ -1006,7 +1039,7 @@ static bool vxlan_snoop(struct net_device *dev, /* close off race between vxlan_flush and incoming packets */ if (netif_running(dev)) - vxlan_fdb_create(vxlan, src_mac, src_ip, + vxlan_fdb_update(vxlan, src_mac, src_ip, NUD_REACHABLE, NLM_F_EXCL|NLM_F_CREATE, vxlan->cfg.dst_port, @@ -3170,7 +3203,7 @@ static int __vxlan_dev_create(struct net *net, struct net_device *dev, /* create an fdb entry for a valid default destination */ if (!vxlan_addr_any(&vxlan->default_dst.remote_ip)) { - err = vxlan_fdb_create(vxlan, all_zeros_mac, + err = vxlan_fdb_update(vxlan, all_zeros_mac, &vxlan->default_dst.remote_ip, NUD_REACHABLE | NUD_PERMANENT, NLM_F_EXCL | NLM_F_CREATE, @@ -3450,7 +3483,7 @@ static int vxlan_changelink(struct net_device *dev, struct nlattr *tb[], old_dst.remote_ifindex, 0); if (!vxlan_addr_any(&dst->remote_ip)) { - err = vxlan_fdb_create(vxlan, all_zeros_mac, + err = vxlan_fdb_update(vxlan, all_zeros_mac, &dst->remote_ip, NUD_REACHABLE | NUD_PERMANENT, NLM_F_CREATE | NLM_F_APPEND, -- cgit v1.2.3 From f6e053858671bb156b6e44ad66418acc8c7f4e77 Mon Sep 17 00:00:00 2001 From: Roopa Prabhu Date: Fri, 20 Jul 2018 13:21:03 -0700 Subject: vxlan: make netlink notify in vxlan_fdb_destroy optional Add a new option do_notify to vxlan_fdb_destroy to make sending netlink notify optional. Used by a later patch. Signed-off-by: Roopa Prabhu Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index c8d5bfffadef..a7e9a4dc0636 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -774,13 +774,15 @@ static void vxlan_fdb_free(struct rcu_head *head) kfree(f); } -static void vxlan_fdb_destroy(struct vxlan_dev *vxlan, struct vxlan_fdb *f) +static void vxlan_fdb_destroy(struct vxlan_dev *vxlan, struct vxlan_fdb *f, + bool do_notify) { netdev_dbg(vxlan->dev, "delete %pM\n", f->eth_addr); --vxlan->addrcnt; - vxlan_fdb_notify(vxlan, f, first_remote_rtnl(f), RTM_DELNEIGH); + if (do_notify) + vxlan_fdb_notify(vxlan, f, first_remote_rtnl(f), RTM_DELNEIGH); hlist_del_rcu(&f->hlist); call_rcu(&f->rcu, vxlan_fdb_free); @@ -930,7 +932,7 @@ static int __vxlan_fdb_delete(struct vxlan_dev *vxlan, goto out; } - vxlan_fdb_destroy(vxlan, f); + vxlan_fdb_destroy(vxlan, f, true); out: return 0; @@ -2397,7 +2399,7 @@ static void vxlan_cleanup(struct timer_list *t) "garbage collect %pM\n", f->eth_addr); f->state = NUD_STALE; - vxlan_fdb_destroy(vxlan, f); + vxlan_fdb_destroy(vxlan, f, true); } else if (time_before(timeout, next_timer)) next_timer = timeout; } @@ -2448,7 +2450,7 @@ static void vxlan_fdb_delete_default(struct vxlan_dev *vxlan, __be32 vni) spin_lock_bh(&vxlan->hash_lock); f = __vxlan_find_mac(vxlan, all_zeros_mac, vni); if (f) - vxlan_fdb_destroy(vxlan, f); + vxlan_fdb_destroy(vxlan, f, true); spin_unlock_bh(&vxlan->hash_lock); } @@ -2502,7 +2504,7 @@ static void vxlan_flush(struct vxlan_dev *vxlan, bool do_all) continue; /* the all_zeros_mac entry is deleted at vxlan_uninit */ if (!is_zero_ether_addr(f->eth_addr)) - vxlan_fdb_destroy(vxlan, f); + vxlan_fdb_destroy(vxlan, f, true); } } spin_unlock_bh(&vxlan->hash_lock); -- cgit v1.2.3 From e99465b952861533d9ba748fdbecc96d9a36da3e Mon Sep 17 00:00:00 2001 From: Roopa Prabhu Date: Fri, 20 Jul 2018 13:21:04 -0700 Subject: vxlan: fix default fdb entry netlink notify ordering during netdev create Problem: In vxlan_newlink, a default fdb entry is added before register_netdev. The default fdb creation function also notifies user-space of the fdb entry on the vxlan device which user-space does not know about yet. (RTM_NEWNEIGH goes before RTM_NEWLINK for the same ifindex). This patch fixes the user-space netlink notification ordering issue with the following changes: - decouple fdb notify from fdb create. - Move fdb notify after register_netdev. - Call rtnl_configure_link in vxlan newlink handler to notify userspace about the newlink before fdb notify and hence avoiding the user-space race. Fixes: afbd8bae9c79 ("vxlan: add implicit fdb entry for default destination") Signed-off-by: Roopa Prabhu Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 29 +++++++++++++++++++++-------- 1 file changed, 21 insertions(+), 8 deletions(-) diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index a7e9a4dc0636..e857cb3335f6 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -3195,6 +3195,7 @@ static int __vxlan_dev_create(struct net *net, struct net_device *dev, { struct vxlan_net *vn = net_generic(net, vxlan_net_id); struct vxlan_dev *vxlan = netdev_priv(dev); + struct vxlan_fdb *f = NULL; int err; err = vxlan_dev_configure(net, dev, conf, false, extack); @@ -3205,27 +3206,38 @@ static int __vxlan_dev_create(struct net *net, struct net_device *dev, /* create an fdb entry for a valid default destination */ if (!vxlan_addr_any(&vxlan->default_dst.remote_ip)) { - err = vxlan_fdb_update(vxlan, all_zeros_mac, + err = vxlan_fdb_create(vxlan, all_zeros_mac, &vxlan->default_dst.remote_ip, NUD_REACHABLE | NUD_PERMANENT, - NLM_F_EXCL | NLM_F_CREATE, vxlan->cfg.dst_port, vxlan->default_dst.remote_vni, vxlan->default_dst.remote_vni, vxlan->default_dst.remote_ifindex, - NTF_SELF); + NTF_SELF, &f); if (err) return err; } err = register_netdevice(dev); + if (err) + goto errout; + + err = rtnl_configure_link(dev, NULL); if (err) { - vxlan_fdb_delete_default(vxlan, vxlan->default_dst.remote_vni); - return err; + unregister_netdevice(dev); + goto errout; } + /* notify default fdb entry */ + if (f) + vxlan_fdb_notify(vxlan, f, first_remote_rtnl(f), RTM_NEWNEIGH); + list_add(&vxlan->next, &vn->vxlan_list); return 0; +errout: + if (f) + vxlan_fdb_destroy(vxlan, f, false); + return err; } static int vxlan_nl2conf(struct nlattr *tb[], struct nlattr *data[], @@ -3460,6 +3472,7 @@ static int vxlan_changelink(struct net_device *dev, struct nlattr *tb[], struct vxlan_rdst *dst = &vxlan->default_dst; struct vxlan_rdst old_dst; struct vxlan_config conf; + struct vxlan_fdb *f = NULL; int err; err = vxlan_nl2conf(tb, data, @@ -3485,19 +3498,19 @@ static int vxlan_changelink(struct net_device *dev, struct nlattr *tb[], old_dst.remote_ifindex, 0); if (!vxlan_addr_any(&dst->remote_ip)) { - err = vxlan_fdb_update(vxlan, all_zeros_mac, + err = vxlan_fdb_create(vxlan, all_zeros_mac, &dst->remote_ip, NUD_REACHABLE | NUD_PERMANENT, - NLM_F_CREATE | NLM_F_APPEND, vxlan->cfg.dst_port, dst->remote_vni, dst->remote_vni, dst->remote_ifindex, - NTF_SELF); + NTF_SELF, &f); if (err) { spin_unlock_bh(&vxlan->hash_lock); return err; } + vxlan_fdb_notify(vxlan, f, first_remote_rtnl(f), RTM_NEWNEIGH); } spin_unlock_bh(&vxlan->hash_lock); } -- cgit v1.2.3 From b809ec869b2cf2af053ffd99e5a46ab600e94aa2 Mon Sep 17 00:00:00 2001 From: John Hurley Date: Fri, 20 Jul 2018 21:07:54 -0700 Subject: nfp: flower: ensure dead neighbour entries are not offloaded Previously only the neighbour state was checked to decide if an offloaded entry should be removed. However, there can be situations when the entry is dead but still marked as valid. This can lead to dead entries not being removed from fw tables or even incorrect data being added. Check the entry dead bit before deciding if it should be added to or removed from fw neighbour tables. Fixes: 8e6a9046b66a ("nfp: flower vxlan neighbour offload") Signed-off-by: John Hurley Reviewed-by: Jakub Kicinski Signed-off-by: David S. Miller --- drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c b/drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c index 78afe75129ab..382bb93cb090 100644 --- a/drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c +++ b/drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.c @@ -317,7 +317,7 @@ nfp_tun_write_neigh(struct net_device *netdev, struct nfp_app *app, payload.dst_ipv4 = flow->daddr; /* If entry has expired send dst IP with all other fields 0. */ - if (!(neigh->nud_state & NUD_VALID)) { + if (!(neigh->nud_state & NUD_VALID) || neigh->dead) { nfp_tun_del_route_from_cache(app, payload.dst_ipv4); /* Trigger ARP to verify invalid neighbour state. */ neigh_event_send(neigh, NULL); -- cgit v1.2.3 From c9ce1fa1c24b08e13c2a3b5b1f94a19c9eaa982c Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sat, 21 Jul 2018 12:59:25 -0700 Subject: net: prevent ISA drivers from building on PPC32 Prevent drivers from building on PPC32 if they use isa_bus_to_virt(), isa_virt_to_bus(), or isa_page_to_bus(), which are not available and thus cause build errors. ../drivers/net/ethernet/3com/3c515.c: In function 'corkscrew_open': ../drivers/net/ethernet/3com/3c515.c:824:9: error: implicit declaration of function 'isa_virt_to_bus'; did you mean 'virt_to_bus'? [-Werror=implicit-function-declaration] ../drivers/net/ethernet/amd/lance.c: In function 'lance_rx': ../drivers/net/ethernet/amd/lance.c:1203:23: error: implicit declaration of function 'isa_bus_to_virt'; did you mean 'bus_to_virt'? [-Werror=implicit-function-declaration] ../drivers/net/ethernet/amd/ni65.c: In function 'ni65_init_lance': ../drivers/net/ethernet/amd/ni65.c:585:20: error: implicit declaration of function 'isa_virt_to_bus'; did you mean 'virt_to_bus'? [-Werror=implicit-function-declaration] ../drivers/net/ethernet/cirrus/cs89x0.c: In function 'net_open': ../drivers/net/ethernet/cirrus/cs89x0.c:897:20: error: implicit declaration of function 'isa_virt_to_bus'; did you mean 'virt_to_bus'? [-Werror=implicit-function-declaration] Signed-off-by: Randy Dunlap Suggested-by: Michael Ellerman Signed-off-by: David S. Miller --- drivers/net/ethernet/3com/Kconfig | 2 +- drivers/net/ethernet/amd/Kconfig | 4 ++-- drivers/net/ethernet/cirrus/Kconfig | 1 + 3 files changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/3com/Kconfig b/drivers/net/ethernet/3com/Kconfig index 5b7658bcf020..5c3ef9fc8207 100644 --- a/drivers/net/ethernet/3com/Kconfig +++ b/drivers/net/ethernet/3com/Kconfig @@ -32,7 +32,7 @@ config EL3 config 3C515 tristate "3c515 ISA \"Fast EtherLink\"" - depends on ISA && ISA_DMA_API + depends on ISA && ISA_DMA_API && !PPC32 ---help--- If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet network card, say Y here. diff --git a/drivers/net/ethernet/amd/Kconfig b/drivers/net/ethernet/amd/Kconfig index f273af136fc7..9e5cf5583c87 100644 --- a/drivers/net/ethernet/amd/Kconfig +++ b/drivers/net/ethernet/amd/Kconfig @@ -44,7 +44,7 @@ config AMD8111_ETH config LANCE tristate "AMD LANCE and PCnet (AT1500 and NE2100) support" - depends on ISA && ISA_DMA_API && !ARM + depends on ISA && ISA_DMA_API && !ARM && !PPC32 ---help--- If you have a network (Ethernet) card of this type, say Y here. Some LinkSys cards are of this type. @@ -138,7 +138,7 @@ config PCMCIA_NMCLAN config NI65 tristate "NI6510 support" - depends on ISA && ISA_DMA_API && !ARM + depends on ISA && ISA_DMA_API && !ARM && !PPC32 ---help--- If you have a network (Ethernet) card of this type, say Y here. diff --git a/drivers/net/ethernet/cirrus/Kconfig b/drivers/net/ethernet/cirrus/Kconfig index 5ab912937aff..ec0b545197e2 100644 --- a/drivers/net/ethernet/cirrus/Kconfig +++ b/drivers/net/ethernet/cirrus/Kconfig @@ -19,6 +19,7 @@ if NET_VENDOR_CIRRUS config CS89x0 tristate "CS89x0 support" depends on ISA || EISA || ARM + depends on !PPC32 ---help--- Support for CS89x0 chipset based Ethernet cards. If you have a network (Ethernet) card of this type, say Y and read the file -- cgit v1.2.3 From f88a333b44318643282b8acc92af90deda441f5e Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 22 Jul 2018 15:07:11 +0100 Subject: alpha: fix osf_wait4() breakage kernel_wait4() expects a userland address for status - it's only rusage that goes as a kernel one (and needs a copyout afterwards) [ Also, fix the prototype of kernel_wait4() to have that __user annotation - Linus ] Fixes: 92ebce5ac55d ("osf_wait4: switch to kernel_wait4()") Cc: stable@kernel.org # v4.13+ Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- arch/alpha/kernel/osf_sys.c | 5 +---- include/linux/sched/task.h | 2 +- 2 files changed, 2 insertions(+), 5 deletions(-) diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c index 6e921754c8fc..c210a25dd6da 100644 --- a/arch/alpha/kernel/osf_sys.c +++ b/arch/alpha/kernel/osf_sys.c @@ -1180,13 +1180,10 @@ SYSCALL_DEFINE2(osf_getrusage, int, who, struct rusage32 __user *, ru) SYSCALL_DEFINE4(osf_wait4, pid_t, pid, int __user *, ustatus, int, options, struct rusage32 __user *, ur) { - unsigned int status = 0; struct rusage r; - long err = kernel_wait4(pid, &status, options, &r); + long err = kernel_wait4(pid, ustatus, options, &r); if (err <= 0) return err; - if (put_user(status, ustatus)) - return -EFAULT; if (!ur) return err; if (put_tv_to_tv32(&ur->ru_utime, &r.ru_utime)) diff --git a/include/linux/sched/task.h b/include/linux/sched/task.h index 5be31eb7b266..108ede99e533 100644 --- a/include/linux/sched/task.h +++ b/include/linux/sched/task.h @@ -75,7 +75,7 @@ extern long _do_fork(unsigned long, unsigned long, unsigned long, int __user *, extern long do_fork(unsigned long, unsigned long, unsigned long, int __user *, int __user *); struct task_struct *fork_idle(int); extern pid_t kernel_thread(int (*fn)(void *), void *arg, unsigned long flags); -extern long kernel_wait4(pid_t, int *, int, struct rusage *); +extern long kernel_wait4(pid_t, int __user *, int, struct rusage *); extern void free_task(struct task_struct *tsk); -- cgit v1.2.3 From d72e90f33aa4709ebecc5005562f52335e106a60 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 22 Jul 2018 14:12:20 -0700 Subject: Linux 4.18-rc6 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index a89d8a0d3ee1..67d9d20f8564 100644 --- a/Makefile +++ b/Makefile @@ -2,7 +2,7 @@ VERSION = 4 PATCHLEVEL = 18 SUBLEVEL = 0 -EXTRAVERSION = -rc5 +EXTRAVERSION = -rc6 NAME = Merciless Moray # *DOCUMENTATION* -- cgit v1.2.3 From 73c2a01c52b657f4a0ead6c95f64c5279efbd000 Mon Sep 17 00:00:00 2001 From: "Schmauss, Erik" Date: Thu, 19 Jul 2018 16:33:00 -0700 Subject: ACPICA: AML Parser: ignore dispatcher error status during table load The dispatcher and the executer process the parse nodes During table load. Error status from the evaluation confuses the AML parser. This results in the parser failing to complete parsing of the current scope op which becomes problematic. For the incorrect AML below, _ADR never gets created. definition_block(...) { Scope (\_SB) { Device (PCI0){...} Name (OBJ1, 0x0) OBJ1 = PCI0 + 5 // Results in an operand error. } // \_SB not closed // parser looks for \_SB._SB.PCI0, results in AE_NOT_FOUND error // Entire scope block gets skipped. Scope (\_SB.PCI0) { Name (_ADR, 0x0) } } Fix the above error by properly completing the initial \_SB scope after an error by clearing errors that occur during table load. In the above case, this means that OBJ1 = PIC0 + 5 is skipped. Fixes: 5088814a6e93 (ACPICA: AML parser: attempt to continue loading table after error) Link: https://bugzilla.kernel.org/show_bug.cgi?id=200363 Tested-by: Bastien Nocera Signed-off-by: Erik Schmauss Cc: 4.17+ # 4.17+ Signed-off-by: Rafael J. Wysocki --- drivers/acpi/acpica/psloop.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/drivers/acpi/acpica/psloop.c b/drivers/acpi/acpica/psloop.c index bc5f05906bd1..ee840be150b5 100644 --- a/drivers/acpi/acpica/psloop.c +++ b/drivers/acpi/acpica/psloop.c @@ -497,6 +497,18 @@ acpi_status acpi_ps_parse_loop(struct acpi_walk_state *walk_state) status = acpi_ps_create_op(walk_state, aml_op_start, &op); if (ACPI_FAILURE(status)) { + /* + * ACPI_PARSE_MODULE_LEVEL means that we are loading a table by + * executing it as a control method. However, if we encounter + * an error while loading the table, we need to keep trying to + * load the table rather than aborting the table load. Set the + * status to AE_OK to proceed with the table load. + */ + if ((walk_state-> + parse_flags & ACPI_PARSE_MODULE_LEVEL) + && status == AE_ALREADY_EXISTS) { + status = AE_OK; + } if (status == AE_CTRL_PARSE_CONTINUE) { continue; } @@ -694,6 +706,20 @@ acpi_status acpi_ps_parse_loop(struct acpi_walk_state *walk_state) acpi_ps_next_parse_state(walk_state, op, status); if (status == AE_CTRL_PENDING) { status = AE_OK; + } else + if ((walk_state-> + parse_flags & ACPI_PARSE_MODULE_LEVEL) + && ACPI_FAILURE(status)) { + /* + * ACPI_PARSE_MODULE_LEVEL means that we are loading a table by + * executing it as a control method. However, if we encounter + * an error while loading the table, we need to keep trying to + * load the table rather than aborting the table load. Set the + * status to AE_OK to proceed with the table load. If we get a + * failure at this point, it means that the dispatcher got an + * error while processing Op (most likely an AML operand error. + */ + status = AE_OK; } } -- cgit v1.2.3 From 5d4c94ed9f564224d7b37dbee13f7c5d4a8a01ac Mon Sep 17 00:00:00 2001 From: Stephane Grosjean Date: Thu, 21 Jun 2018 15:23:31 +0200 Subject: can: peak_canfd: fix firmware < v3.3.0: limit allocation to 32-bit DMA addr only The DMA logic in firmwares < v3.3.0 embedded in the PCAN-PCIe FD cards family is not capable of handling a mix of 32-bit and 64-bit logical addresses. If the board is equipped with 2 or 4 CAN ports, then such a situation might lead to a PCIe Bus Error "Malformed TLP" packet as well as "irq xx: nobody cared" issue. This patch adds a workaround that requests only 32-bit DMA addresses when these might be allocated outside of the 4 GB area. This issue has been fixed in firmware v3.3.0 and next. Signed-off-by: Stephane Grosjean Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/peak_canfd/peak_pciefd_main.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/drivers/net/can/peak_canfd/peak_pciefd_main.c b/drivers/net/can/peak_canfd/peak_pciefd_main.c index b9e28578bc7b..455a3797a200 100644 --- a/drivers/net/can/peak_canfd/peak_pciefd_main.c +++ b/drivers/net/can/peak_canfd/peak_pciefd_main.c @@ -58,6 +58,10 @@ MODULE_LICENSE("GPL v2"); #define PCIEFD_REG_SYS_VER1 0x0040 /* version reg #1 */ #define PCIEFD_REG_SYS_VER2 0x0044 /* version reg #2 */ +#define PCIEFD_FW_VERSION(x, y, z) (((u32)(x) << 24) | \ + ((u32)(y) << 16) | \ + ((u32)(z) << 8)) + /* System Control Registers Bits */ #define PCIEFD_SYS_CTL_TS_RST 0x00000001 /* timestamp clock */ #define PCIEFD_SYS_CTL_CLK_EN 0x00000002 /* system clock */ @@ -782,6 +786,21 @@ static int peak_pciefd_probe(struct pci_dev *pdev, "%ux CAN-FD PCAN-PCIe FPGA v%u.%u.%u:\n", can_count, hw_ver_major, hw_ver_minor, hw_ver_sub); +#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT + /* FW < v3.3.0 DMA logic doesn't handle correctly the mix of 32-bit and + * 64-bit logical addresses: this workaround forces usage of 32-bit + * DMA addresses only when such a fw is detected. + */ + if (PCIEFD_FW_VERSION(hw_ver_major, hw_ver_minor, hw_ver_sub) < + PCIEFD_FW_VERSION(3, 3, 0)) { + err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); + if (err) + dev_warn(&pdev->dev, + "warning: can't set DMA mask %llxh (err %d)\n", + DMA_BIT_MASK(32), err); + } +#endif + /* stop system clock */ pciefd_sys_writereg(pciefd, PCIEFD_SYS_CTL_CLK_EN, PCIEFD_REG_SYS_CTL_CLR); -- cgit v1.2.3 From 393753b217f05474e714aea36c37501546ed1202 Mon Sep 17 00:00:00 2001 From: Roman Fietze Date: Wed, 11 Jul 2018 15:36:14 +0200 Subject: can: m_can.c: fix setup of CCCR register: clear CCCR NISO bit before checking can.ctrlmode Inside m_can_chip_config(), when setting up the new value of the CCCR, the CCCR_NISO bit is not cleared like the others, CCCR_TEST, CCCR_MON, CCCR_BRSE and CCCR_FDOE, before checking the can.ctrlmode bits for CAN_CTRLMODE_FD_NON_ISO. This way once the controller was configured for CAN_CTRLMODE_FD_NON_ISO, this mode could never be cleared again. This fix is only relevant for controllers with version 3.1.x or 3.2.x. Older versions do not support NISO. Signed-off-by: Roman Fietze Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/m_can/m_can.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c index b397a33f3d32..8e2b7f873c4d 100644 --- a/drivers/net/can/m_can/m_can.c +++ b/drivers/net/can/m_can/m_can.c @@ -1109,7 +1109,8 @@ static void m_can_chip_config(struct net_device *dev) } else { /* Version 3.1.x or 3.2.x */ - cccr &= ~(CCCR_TEST | CCCR_MON | CCCR_BRSE | CCCR_FDOE); + cccr &= ~(CCCR_TEST | CCCR_MON | CCCR_BRSE | CCCR_FDOE | + CCCR_NISO); /* Only 3.2.x has NISO Bit implemented */ if (priv->can.ctrlmode & CAN_CTRLMODE_FD_NON_ISO) -- cgit v1.2.3 From b5c1a23b17e563b656cc9bb76ce5323b997d90e8 Mon Sep 17 00:00:00 2001 From: Nicholas Mc Guire Date: Mon, 9 Jul 2018 21:16:40 +0200 Subject: can: mpc5xxx_can: check of_iomap return before use of_iomap() can return NULL so that return needs to be checked and NULL treated as failure. While at it also take care of the missing of_node_put() in the error path. Signed-off-by: Nicholas Mc Guire Fixes: commit afa17a500a36 ("net/can: add driver for mscan family & mpc52xx_mscan") Signed-off-by: Marc Kleine-Budde --- drivers/net/can/mscan/mpc5xxx_can.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/can/mscan/mpc5xxx_can.c b/drivers/net/can/mscan/mpc5xxx_can.c index c7427bdd3a4b..2949a381a94d 100644 --- a/drivers/net/can/mscan/mpc5xxx_can.c +++ b/drivers/net/can/mscan/mpc5xxx_can.c @@ -86,6 +86,11 @@ static u32 mpc52xx_can_get_clock(struct platform_device *ofdev, return 0; } cdm = of_iomap(np_cdm, 0); + if (!cdm) { + of_node_put(np_cdm); + dev_err(&ofdev->dev, "can't map clock node!\n"); + return 0; + } if (in_8(&cdm->ipb_clk_sel) & 0x1) freq *= 2; -- cgit v1.2.3 From 1675bee3e732c2449e792feed9caff804f3bd42c Mon Sep 17 00:00:00 2001 From: Faiz Abbas Date: Tue, 3 Jul 2018 16:41:02 +0530 Subject: can: m_can: Fix runtime resume call pm_runtime_get_sync() returns a 1 if the state of the device is already 'active'. This is not a failure case and should return a success. Therefore fix error handling for pm_runtime_get_sync() call such that it returns success when the value is 1. Also cleanup the TODO for using runtime PM for sleep mode as that is implemented. Signed-off-by: Faiz Abbas Cc: --- drivers/net/can/m_can/m_can.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c index 8e2b7f873c4d..e2f965c2e3aa 100644 --- a/drivers/net/can/m_can/m_can.c +++ b/drivers/net/can/m_can/m_can.c @@ -634,10 +634,12 @@ static int m_can_clk_start(struct m_can_priv *priv) int err; err = pm_runtime_get_sync(priv->device); - if (err) + if (err < 0) { pm_runtime_put_noidle(priv->device); + return err; + } - return err; + return 0; } static void m_can_clk_stop(struct m_can_priv *priv) @@ -1688,8 +1690,6 @@ failed_ret: return ret; } -/* TODO: runtime PM with power down or sleep mode */ - static __maybe_unused int m_can_suspend(struct device *dev) { struct net_device *ndev = dev_get_drvdata(dev); -- cgit v1.2.3 From 54e4a0c486041dc1c20593d997fafd67089e8408 Mon Sep 17 00:00:00 2001 From: Faiz Abbas Date: Tue, 3 Jul 2018 16:47:10 +0530 Subject: can: m_can: Move accessing of message ram to after clocks are enabled MCAN message ram should only be accessed once clocks are enabled. Therefore, move the call to parse/init the message ram to after clocks are enabled. Signed-off-by: Faiz Abbas Signed-off-by: Marc Kleine-Budde --- drivers/net/can/m_can/m_can.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c index e2f965c2e3aa..9b449400376b 100644 --- a/drivers/net/can/m_can/m_can.c +++ b/drivers/net/can/m_can/m_can.c @@ -1645,8 +1645,6 @@ static int m_can_plat_probe(struct platform_device *pdev) priv->can.clock.freq = clk_get_rate(cclk); priv->mram_base = mram_addr; - m_can_of_parse_mram(priv, mram_config_vals); - platform_set_drvdata(pdev, dev); SET_NETDEV_DEV(dev, &pdev->dev); @@ -1669,6 +1667,8 @@ static int m_can_plat_probe(struct platform_device *pdev) goto clk_disable; } + m_can_of_parse_mram(priv, mram_config_vals); + devm_can_led_init(dev); of_can_transceiver(dev); @@ -1716,8 +1716,6 @@ static __maybe_unused int m_can_resume(struct device *dev) pinctrl_pm_select_default_state(dev); - m_can_init_ram(priv); - priv->can.state = CAN_STATE_ERROR_ACTIVE; if (netif_running(ndev)) { @@ -1727,6 +1725,7 @@ static __maybe_unused int m_can_resume(struct device *dev) if (ret) return ret; + m_can_init_ram(priv); m_can_start(ndev); netif_device_attach(ndev); netif_start_queue(ndev); -- cgit v1.2.3 From 2574fe54515ed3487405de329e4e9f13d7098c10 Mon Sep 17 00:00:00 2001 From: Anssi Hannula Date: Tue, 7 Feb 2017 13:23:04 +0200 Subject: can: xilinx_can: fix device dropping off bus on RX overrun The xilinx_can driver performs a software reset when an RX overrun is detected. This causes the device to enter Configuration mode where no messages are received or transmitted. The documentation does not mention any need to perform a reset on an RX overrun, and testing by inducing an RX overflow also indicated that the device continues to work just fine without a reset. Remove the software reset. Tested with the integrated CAN on Zynq-7000 SoC. Fixes: b1201e44f50b ("can: xilinx CAN controller support") Signed-off-by: Anssi Hannula Cc: Signed-off-by: Marc Kleine-Budde --- drivers/net/can/xilinx_can.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c index 89aec07c225f..389a9603db8c 100644 --- a/drivers/net/can/xilinx_can.c +++ b/drivers/net/can/xilinx_can.c @@ -600,7 +600,6 @@ static void xcan_err_interrupt(struct net_device *ndev, u32 isr) if (isr & XCAN_IXR_RXOFLW_MASK) { stats->rx_over_errors++; stats->rx_errors++; - priv->write_reg(priv, XCAN_SRR_OFFSET, XCAN_SRR_RESET_MASK); if (skb) { cf->can_id |= CAN_ERR_CRTL; cf->data[1] |= CAN_ERR_CRTL_RX_OVERFLOW; -- cgit v1.2.3 From 32852c561bffd613d4ed7ec464b1e03e1b7b6c5c Mon Sep 17 00:00:00 2001 From: Anssi Hannula Date: Tue, 7 Feb 2017 17:01:14 +0200 Subject: can: xilinx_can: fix RX loop if RXNEMP is asserted without RXOK If the device gets into a state where RXNEMP (RX FIFO not empty) interrupt is asserted without RXOK (new frame received successfully) interrupt being asserted, xcan_rx_poll() will continue to try to clear RXNEMP without actually reading frames from RX FIFO. If the RX FIFO is not empty, the interrupt will not be cleared and napi_schedule() will just be called again. This situation can occur when: (a) xcan_rx() returns without reading RX FIFO due to an error condition. The code tries to clear both RXOK and RXNEMP but RXNEMP will not clear due to a frame still being in the FIFO. The frame will never be read from the FIFO as RXOK is no longer set. (b) A frame is received between xcan_rx_poll() reading interrupt status and clearing RXOK. RXOK will be cleared, but RXNEMP will again remain set as the new message is still in the FIFO. I'm able to trigger case (b) by flooding the bus with frames under load. There does not seem to be any benefit in using both RXNEMP and RXOK in the way the driver does, and the polling example in the reference manual (UG585 v1.10 18.3.7 Read Messages from RxFIFO) also says that either RXOK or RXNEMP can be used for detecting incoming messages. Fix the issue and simplify the RX processing by only using RXNEMP without RXOK. Tested with the integrated CAN on Zynq-7000 SoC. Fixes: b1201e44f50b ("can: xilinx CAN controller support") Signed-off-by: Anssi Hannula Cc: Signed-off-by: Marc Kleine-Budde --- drivers/net/can/xilinx_can.c | 18 +++++------------- 1 file changed, 5 insertions(+), 13 deletions(-) diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c index 389a9603db8c..1bda47aa62f5 100644 --- a/drivers/net/can/xilinx_can.c +++ b/drivers/net/can/xilinx_can.c @@ -101,7 +101,7 @@ enum xcan_reg { #define XCAN_INTR_ALL (XCAN_IXR_TXOK_MASK | XCAN_IXR_BSOFF_MASK |\ XCAN_IXR_WKUP_MASK | XCAN_IXR_SLP_MASK | \ XCAN_IXR_RXNEMP_MASK | XCAN_IXR_ERROR_MASK | \ - XCAN_IXR_ARBLST_MASK | XCAN_IXR_RXOK_MASK) + XCAN_IXR_ARBLST_MASK) /* CAN register bit shift - XCAN___SHIFT */ #define XCAN_BTR_SJW_SHIFT 7 /* Synchronous jump width */ @@ -708,15 +708,7 @@ static int xcan_rx_poll(struct napi_struct *napi, int quota) isr = priv->read_reg(priv, XCAN_ISR_OFFSET); while ((isr & XCAN_IXR_RXNEMP_MASK) && (work_done < quota)) { - if (isr & XCAN_IXR_RXOK_MASK) { - priv->write_reg(priv, XCAN_ICR_OFFSET, - XCAN_IXR_RXOK_MASK); - work_done += xcan_rx(ndev); - } else { - priv->write_reg(priv, XCAN_ICR_OFFSET, - XCAN_IXR_RXNEMP_MASK); - break; - } + work_done += xcan_rx(ndev); priv->write_reg(priv, XCAN_ICR_OFFSET, XCAN_IXR_RXNEMP_MASK); isr = priv->read_reg(priv, XCAN_ISR_OFFSET); } @@ -727,7 +719,7 @@ static int xcan_rx_poll(struct napi_struct *napi, int quota) if (work_done < quota) { napi_complete_done(napi, work_done); ier = priv->read_reg(priv, XCAN_IER_OFFSET); - ier |= (XCAN_IXR_RXOK_MASK | XCAN_IXR_RXNEMP_MASK); + ier |= XCAN_IXR_RXNEMP_MASK; priv->write_reg(priv, XCAN_IER_OFFSET, ier); } return work_done; @@ -799,9 +791,9 @@ static irqreturn_t xcan_interrupt(int irq, void *dev_id) } /* Check for the type of receive interrupt and Processing it */ - if (isr & (XCAN_IXR_RXNEMP_MASK | XCAN_IXR_RXOK_MASK)) { + if (isr & XCAN_IXR_RXNEMP_MASK) { ier = priv->read_reg(priv, XCAN_IER_OFFSET); - ier &= ~(XCAN_IXR_RXNEMP_MASK | XCAN_IXR_RXOK_MASK); + ier &= ~XCAN_IXR_RXNEMP_MASK; priv->write_reg(priv, XCAN_IER_OFFSET, ier); napi_schedule(&priv->napi); } -- cgit v1.2.3 From 877e0b75947e2c7acf5624331bb17ceb093c98ae Mon Sep 17 00:00:00 2001 From: Anssi Hannula Date: Wed, 8 Feb 2017 13:13:40 +0200 Subject: can: xilinx_can: fix recovery from error states not being propagated The xilinx_can driver contains no mechanism for propagating recovery from CAN_STATE_ERROR_WARNING and CAN_STATE_ERROR_PASSIVE. Add such a mechanism by factoring the handling of XCAN_STATE_ERROR_PASSIVE and XCAN_STATE_ERROR_WARNING out of xcan_err_interrupt and checking for recovery after RX and TX if the interface is in one of those states. Tested with the integrated CAN on Zynq-7000 SoC. Fixes: b1201e44f50b ("can: xilinx CAN controller support") Signed-off-by: Anssi Hannula Cc: Signed-off-by: Marc Kleine-Budde --- drivers/net/can/xilinx_can.c | 155 +++++++++++++++++++++++++++++++++++-------- 1 file changed, 127 insertions(+), 28 deletions(-) diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c index 1bda47aa62f5..763408a3eafb 100644 --- a/drivers/net/can/xilinx_can.c +++ b/drivers/net/can/xilinx_can.c @@ -2,6 +2,7 @@ * * Copyright (C) 2012 - 2014 Xilinx, Inc. * Copyright (C) 2009 PetaLogix. All rights reserved. + * Copyright (C) 2017 Sandvik Mining and Construction Oy * * Description: * This driver is developed for Axi CAN IP and for Zynq CANPS Controller. @@ -529,6 +530,123 @@ static int xcan_rx(struct net_device *ndev) return 1; } +/** + * xcan_current_error_state - Get current error state from HW + * @ndev: Pointer to net_device structure + * + * Checks the current CAN error state from the HW. Note that this + * only checks for ERROR_PASSIVE and ERROR_WARNING. + * + * Return: + * ERROR_PASSIVE or ERROR_WARNING if either is active, ERROR_ACTIVE + * otherwise. + */ +static enum can_state xcan_current_error_state(struct net_device *ndev) +{ + struct xcan_priv *priv = netdev_priv(ndev); + u32 status = priv->read_reg(priv, XCAN_SR_OFFSET); + + if ((status & XCAN_SR_ESTAT_MASK) == XCAN_SR_ESTAT_MASK) + return CAN_STATE_ERROR_PASSIVE; + else if (status & XCAN_SR_ERRWRN_MASK) + return CAN_STATE_ERROR_WARNING; + else + return CAN_STATE_ERROR_ACTIVE; +} + +/** + * xcan_set_error_state - Set new CAN error state + * @ndev: Pointer to net_device structure + * @new_state: The new CAN state to be set + * @cf: Error frame to be populated or NULL + * + * Set new CAN error state for the device, updating statistics and + * populating the error frame if given. + */ +static void xcan_set_error_state(struct net_device *ndev, + enum can_state new_state, + struct can_frame *cf) +{ + struct xcan_priv *priv = netdev_priv(ndev); + u32 ecr = priv->read_reg(priv, XCAN_ECR_OFFSET); + u32 txerr = ecr & XCAN_ECR_TEC_MASK; + u32 rxerr = (ecr & XCAN_ECR_REC_MASK) >> XCAN_ESR_REC_SHIFT; + + priv->can.state = new_state; + + if (cf) { + cf->can_id |= CAN_ERR_CRTL; + cf->data[6] = txerr; + cf->data[7] = rxerr; + } + + switch (new_state) { + case CAN_STATE_ERROR_PASSIVE: + priv->can.can_stats.error_passive++; + if (cf) + cf->data[1] = (rxerr > 127) ? + CAN_ERR_CRTL_RX_PASSIVE : + CAN_ERR_CRTL_TX_PASSIVE; + break; + case CAN_STATE_ERROR_WARNING: + priv->can.can_stats.error_warning++; + if (cf) + cf->data[1] |= (txerr > rxerr) ? + CAN_ERR_CRTL_TX_WARNING : + CAN_ERR_CRTL_RX_WARNING; + break; + case CAN_STATE_ERROR_ACTIVE: + if (cf) + cf->data[1] |= CAN_ERR_CRTL_ACTIVE; + break; + default: + /* non-ERROR states are handled elsewhere */ + WARN_ON(1); + break; + } +} + +/** + * xcan_update_error_state_after_rxtx - Update CAN error state after RX/TX + * @ndev: Pointer to net_device structure + * + * If the device is in a ERROR-WARNING or ERROR-PASSIVE state, check if + * the performed RX/TX has caused it to drop to a lesser state and set + * the interface state accordingly. + */ +static void xcan_update_error_state_after_rxtx(struct net_device *ndev) +{ + struct xcan_priv *priv = netdev_priv(ndev); + enum can_state old_state = priv->can.state; + enum can_state new_state; + + /* changing error state due to successful frame RX/TX can only + * occur from these states + */ + if (old_state != CAN_STATE_ERROR_WARNING && + old_state != CAN_STATE_ERROR_PASSIVE) + return; + + new_state = xcan_current_error_state(ndev); + + if (new_state != old_state) { + struct sk_buff *skb; + struct can_frame *cf; + + skb = alloc_can_err_skb(ndev, &cf); + + xcan_set_error_state(ndev, new_state, skb ? cf : NULL); + + if (skb) { + struct net_device_stats *stats = &ndev->stats; + + stats->rx_packets++; + stats->rx_bytes += cf->can_dlc; + netif_rx(skb); + } + } +} + /** * xcan_err_interrupt - error frame Isr * @ndev: net_device pointer @@ -544,16 +662,12 @@ static void xcan_err_interrupt(struct net_device *ndev, u32 isr) struct net_device_stats *stats = &ndev->stats; struct can_frame *cf; struct sk_buff *skb; - u32 err_status, status, txerr = 0, rxerr = 0; + u32 err_status; skb = alloc_can_err_skb(ndev, &cf); err_status = priv->read_reg(priv, XCAN_ESR_OFFSET); priv->write_reg(priv, XCAN_ESR_OFFSET, err_status); - txerr = priv->read_reg(priv, XCAN_ECR_OFFSET) & XCAN_ECR_TEC_MASK; - rxerr = ((priv->read_reg(priv, XCAN_ECR_OFFSET) & - XCAN_ECR_REC_MASK) >> XCAN_ESR_REC_SHIFT); - status = priv->read_reg(priv, XCAN_SR_OFFSET); if (isr & XCAN_IXR_BSOFF_MASK) { priv->can.state = CAN_STATE_BUS_OFF; @@ -563,28 +677,10 @@ static void xcan_err_interrupt(struct net_device *ndev, u32 isr) can_bus_off(ndev); if (skb) cf->can_id |= CAN_ERR_BUSOFF; - } else if ((status & XCAN_SR_ESTAT_MASK) == XCAN_SR_ESTAT_MASK) { - priv->can.state = CAN_STATE_ERROR_PASSIVE; - priv->can.can_stats.error_passive++; - if (skb) { - cf->can_id |= CAN_ERR_CRTL; - cf->data[1] = (rxerr > 127) ? - CAN_ERR_CRTL_RX_PASSIVE : - CAN_ERR_CRTL_TX_PASSIVE; - cf->data[6] = txerr; - cf->data[7] = rxerr; - } - } else if (status & XCAN_SR_ERRWRN_MASK) { - priv->can.state = CAN_STATE_ERROR_WARNING; - priv->can.can_stats.error_warning++; - if (skb) { - cf->can_id |= CAN_ERR_CRTL; - cf->data[1] |= (txerr > rxerr) ? - CAN_ERR_CRTL_TX_WARNING : - CAN_ERR_CRTL_RX_WARNING; - cf->data[6] = txerr; - cf->data[7] = rxerr; - } + } else { + enum can_state new_state = xcan_current_error_state(ndev); + + xcan_set_error_state(ndev, new_state, skb ? cf : NULL); } /* Check for Arbitration lost interrupt */ @@ -713,8 +809,10 @@ static int xcan_rx_poll(struct napi_struct *napi, int quota) isr = priv->read_reg(priv, XCAN_ISR_OFFSET); } - if (work_done) + if (work_done) { can_led_event(ndev, CAN_LED_EVENT_RX); + xcan_update_error_state_after_rxtx(ndev); + } if (work_done < quota) { napi_complete_done(napi, work_done); @@ -745,6 +843,7 @@ static void xcan_tx_interrupt(struct net_device *ndev, u32 isr) isr = priv->read_reg(priv, XCAN_ISR_OFFSET); } can_led_event(ndev, CAN_LED_EVENT_TX); + xcan_update_error_state_after_rxtx(ndev); netif_wake_queue(ndev); } -- cgit v1.2.3 From 620050d9c2be15c47017ba95efe59e0832e99a56 Mon Sep 17 00:00:00 2001 From: Anssi Hannula Date: Thu, 23 Feb 2017 14:50:03 +0200 Subject: can: xilinx_can: keep only 1-2 frames in TX FIFO to fix TX accounting The xilinx_can driver assumes that the TXOK interrupt only clears after it has been acknowledged as many times as there have been successfully sent frames. However, the documentation does not mention such behavior, instead saying just that the interrupt is cleared when the clear bit is set. Similarly, testing seems to also suggest that it is immediately cleared regardless of the amount of frames having been sent. Performing some heavy TX load and then going back to idle has the tx_head drifting further away from tx_tail over time, steadily reducing the amount of frames the driver keeps in the TX FIFO (but not to zero, as the TXOK interrupt always frees up space for 1 frame from the driver's perspective, so frames continue to be sent) and delaying the local echo frames. The TX FIFO tracking is also otherwise buggy as it does not account for TX FIFO being cleared after software resets, causing BUG!, TX FIFO full when queue awake! messages to be output. There does not seem to be any way to accurately track the state of the TX FIFO for local echo support while using the full TX FIFO. The Zynq version of the HW (but not the soft-AXI version) has watermark programming support and with it an additional TX-FIFO-empty interrupt bit. Modify the driver to only put 1 frame into TX FIFO at a time on soft-AXI and 2 frames at a time on Zynq. On Zynq the TXFEMP interrupt bit is used to detect whether 1 or 2 frames have been sent at interrupt processing time. Tested with the integrated CAN on Zynq-7000 SoC. The 1-frame-FIFO mode was also tested. An alternative way to solve this would be to drop local echo support but keep using the full TX FIFO. v2: Add FIFO space check before TX queue wake with locking to synchronize with queue stop. This avoids waking the queue when xmit() had just filled it. v3: Keep local echo support and reduce the amount of frames in FIFO instead as suggested by Marc Kleine-Budde. Fixes: b1201e44f50b ("can: xilinx CAN controller support") Signed-off-by: Anssi Hannula Cc: Signed-off-by: Marc Kleine-Budde --- drivers/net/can/xilinx_can.c | 139 ++++++++++++++++++++++++++++++++++++++----- 1 file changed, 123 insertions(+), 16 deletions(-) diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c index 763408a3eafb..dcbdc3cd651c 100644 --- a/drivers/net/can/xilinx_can.c +++ b/drivers/net/can/xilinx_can.c @@ -26,8 +26,10 @@ #include #include #include +#include #include #include +#include #include #include #include @@ -119,6 +121,7 @@ enum xcan_reg { /** * struct xcan_priv - This definition define CAN driver instance * @can: CAN private data structure. + * @tx_lock: Lock for synchronizing TX interrupt handling * @tx_head: Tx CAN packets ready to send on the queue * @tx_tail: Tx CAN packets successfully sended on the queue * @tx_max: Maximum number packets the driver can send @@ -133,6 +136,7 @@ enum xcan_reg { */ struct xcan_priv { struct can_priv can; + spinlock_t tx_lock; unsigned int tx_head; unsigned int tx_tail; unsigned int tx_max; @@ -160,6 +164,11 @@ static const struct can_bittiming_const xcan_bittiming_const = { .brp_inc = 1, }; +#define XCAN_CAP_WATERMARK 0x0001 +struct xcan_devtype_data { + unsigned int caps; +}; + /** * xcan_write_reg_le - Write a value to the device register little endian * @priv: Driver private data structure @@ -239,6 +248,10 @@ static int set_reset_mode(struct net_device *ndev) usleep_range(500, 10000); } + /* reset clears FIFOs */ + priv->tx_head = 0; + priv->tx_tail = 0; + return 0; } @@ -393,6 +406,7 @@ static int xcan_start_xmit(struct sk_buff *skb, struct net_device *ndev) struct net_device_stats *stats = &ndev->stats; struct can_frame *cf = (struct can_frame *)skb->data; u32 id, dlc, data[2] = {0, 0}; + unsigned long flags; if (can_dropped_invalid_skb(ndev, skb)) return NETDEV_TX_OK; @@ -440,6 +454,9 @@ static int xcan_start_xmit(struct sk_buff *skb, struct net_device *ndev) data[1] = be32_to_cpup((__be32 *)(cf->data + 4)); can_put_echo_skb(skb, ndev, priv->tx_head % priv->tx_max); + + spin_lock_irqsave(&priv->tx_lock, flags); + priv->tx_head++; /* Write the Frame to Xilinx CAN TX FIFO */ @@ -455,10 +472,16 @@ static int xcan_start_xmit(struct sk_buff *skb, struct net_device *ndev) stats->tx_bytes += cf->can_dlc; } + /* Clear TX-FIFO-empty interrupt for xcan_tx_interrupt() */ + if (priv->tx_max > 1) + priv->write_reg(priv, XCAN_ICR_OFFSET, XCAN_IXR_TXFEMP_MASK); + /* Check if the TX buffer is full */ if ((priv->tx_head - priv->tx_tail) == priv->tx_max) netif_stop_queue(ndev); + spin_unlock_irqrestore(&priv->tx_lock, flags); + return NETDEV_TX_OK; } @@ -832,19 +855,71 @@ static void xcan_tx_interrupt(struct net_device *ndev, u32 isr) { struct xcan_priv *priv = netdev_priv(ndev); struct net_device_stats *stats = &ndev->stats; + unsigned int frames_in_fifo; + int frames_sent = 1; /* TXOK => at least 1 frame was sent */ + unsigned long flags; + int retries = 0; + + /* Synchronize with xmit as we need to know the exact number + * of frames in the FIFO to stay in sync due to the TXFEMP + * handling. + * This also prevents a race between netif_wake_queue() and + * netif_stop_queue(). + */ + spin_lock_irqsave(&priv->tx_lock, flags); + + frames_in_fifo = priv->tx_head - priv->tx_tail; - while ((priv->tx_head - priv->tx_tail > 0) && - (isr & XCAN_IXR_TXOK_MASK)) { + if (WARN_ON_ONCE(frames_in_fifo == 0)) { + /* clear TXOK anyway to avoid getting back here */ priv->write_reg(priv, XCAN_ICR_OFFSET, XCAN_IXR_TXOK_MASK); + spin_unlock_irqrestore(&priv->tx_lock, flags); + return; + } + + /* Check if 2 frames were sent (TXOK only means that at least 1 + * frame was sent). + */ + if (frames_in_fifo > 1) { + WARN_ON(frames_in_fifo > priv->tx_max); + + /* Synchronize TXOK and isr so that after the loop: + * (1) isr variable is up-to-date at least up to TXOK clear + * time. This avoids us clearing a TXOK of a second frame + * but not noticing that the FIFO is now empty and thus + * marking only a single frame as sent. + * (2) No TXOK is left. Having one could mean leaving a + * stray TXOK as we might process the associated frame + * via TXFEMP handling as we read TXFEMP *after* TXOK + * clear to satisfy (1). + */ + while ((isr & XCAN_IXR_TXOK_MASK) && !WARN_ON(++retries == 100)) { + priv->write_reg(priv, XCAN_ICR_OFFSET, XCAN_IXR_TXOK_MASK); + isr = priv->read_reg(priv, XCAN_ISR_OFFSET); + } + + if (isr & XCAN_IXR_TXFEMP_MASK) { + /* nothing in FIFO anymore */ + frames_sent = frames_in_fifo; + } + } else { + /* single frame in fifo, just clear TXOK */ + priv->write_reg(priv, XCAN_ICR_OFFSET, XCAN_IXR_TXOK_MASK); + } + + while (frames_sent--) { can_get_echo_skb(ndev, priv->tx_tail % priv->tx_max); priv->tx_tail++; stats->tx_packets++; - isr = priv->read_reg(priv, XCAN_ISR_OFFSET); } + + netif_wake_queue(ndev); + + spin_unlock_irqrestore(&priv->tx_lock, flags); + can_led_event(ndev, CAN_LED_EVENT_TX); xcan_update_error_state_after_rxtx(ndev); - netif_wake_queue(ndev); } /** @@ -1151,6 +1226,18 @@ static const struct dev_pm_ops xcan_dev_pm_ops = { SET_RUNTIME_PM_OPS(xcan_runtime_suspend, xcan_runtime_resume, NULL) }; +static const struct xcan_devtype_data xcan_zynq_data = { + .caps = XCAN_CAP_WATERMARK, +}; + +/* Match table for OF platform binding */ +static const struct of_device_id xcan_of_match[] = { + { .compatible = "xlnx,zynq-can-1.0", .data = &xcan_zynq_data }, + { .compatible = "xlnx,axi-can-1.00.a", }, + { /* end of list */ }, +}; +MODULE_DEVICE_TABLE(of, xcan_of_match); + /** * xcan_probe - Platform registration call * @pdev: Handle to the platform device structure @@ -1165,8 +1252,10 @@ static int xcan_probe(struct platform_device *pdev) struct resource *res; /* IO mem resources */ struct net_device *ndev; struct xcan_priv *priv; + const struct of_device_id *of_id; + int caps = 0; void __iomem *addr; - int ret, rx_max, tx_max; + int ret, rx_max, tx_max, tx_fifo_depth; /* Get the virtual base address for the device */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -1176,7 +1265,8 @@ static int xcan_probe(struct platform_device *pdev) goto err; } - ret = of_property_read_u32(pdev->dev.of_node, "tx-fifo-depth", &tx_max); + ret = of_property_read_u32(pdev->dev.of_node, "tx-fifo-depth", + &tx_fifo_depth); if (ret < 0) goto err; @@ -1184,6 +1274,30 @@ static int xcan_probe(struct platform_device *pdev) if (ret < 0) goto err; + of_id = of_match_device(xcan_of_match, &pdev->dev); + if (of_id) { + const struct xcan_devtype_data *devtype_data = of_id->data; + + if (devtype_data) + caps = devtype_data->caps; + } + + /* There is no way to directly figure out how many frames have been + * sent when the TXOK interrupt is processed. If watermark programming + * is supported, we can have 2 frames in the FIFO and use TXFEMP + * to determine if 1 or 2 frames have been sent. + * Theoretically we should be able to use TXFWMEMP to determine up + * to 3 frames, but it seems that after putting a second frame in the + * FIFO, with watermark at 2 frames, it can happen that TXFWMEMP (less + * than 2 frames in FIFO) is set anyway with no TXOK (a frame was + * sent), which is not a sensible state - possibly TXFWMEMP is not + * completely synchronized with the rest of the bits? + */ + if (caps & XCAN_CAP_WATERMARK) + tx_max = min(tx_fifo_depth, 2); + else + tx_max = 1; + /* Create a CAN device instance */ ndev = alloc_candev(sizeof(struct xcan_priv), tx_max); if (!ndev) @@ -1198,6 +1312,7 @@ static int xcan_probe(struct platform_device *pdev) CAN_CTRLMODE_BERR_REPORTING; priv->reg_base = addr; priv->tx_max = tx_max; + spin_lock_init(&priv->tx_lock); /* Get IRQ for the device */ ndev->irq = platform_get_irq(pdev, 0); @@ -1262,9 +1377,9 @@ static int xcan_probe(struct platform_device *pdev) pm_runtime_put(&pdev->dev); - netdev_dbg(ndev, "reg_base=0x%p irq=%d clock=%d, tx fifo depth:%d\n", + netdev_dbg(ndev, "reg_base=0x%p irq=%d clock=%d, tx fifo depth: actual %d, using %d\n", priv->reg_base, ndev->irq, priv->can.clock.freq, - priv->tx_max); + tx_fifo_depth, priv->tx_max); return 0; @@ -1298,14 +1413,6 @@ static int xcan_remove(struct platform_device *pdev) return 0; } -/* Match table for OF platform binding */ -static const struct of_device_id xcan_of_match[] = { - { .compatible = "xlnx,zynq-can-1.0", }, - { .compatible = "xlnx,axi-can-1.00.a", }, - { /* end of list */ }, -}; -MODULE_DEVICE_TABLE(of, xcan_of_match); - static struct platform_driver xcan_driver = { .probe = xcan_probe, .remove = xcan_remove, -- cgit v1.2.3 From 83997997252f5d3fc7f04abc24a89600c2b504ab Mon Sep 17 00:00:00 2001 From: Anssi Hannula Date: Mon, 26 Feb 2018 14:27:13 +0200 Subject: can: xilinx_can: fix RX overflow interrupt not being enabled RX overflow interrupt (RXOFLW) is disabled even though xcan_interrupt() processes it. This means that an RX overflow interrupt will only be processed when another interrupt gets asserted (e.g. for RX/TX). Fix that by enabling the RXOFLW interrupt. Fixes: b1201e44f50b ("can: xilinx CAN controller support") Signed-off-by: Anssi Hannula Cc: Michal Simek Cc: Signed-off-by: Marc Kleine-Budde --- drivers/net/can/xilinx_can.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c index dcbdc3cd651c..ea9f9d1a5ba7 100644 --- a/drivers/net/can/xilinx_can.c +++ b/drivers/net/can/xilinx_can.c @@ -104,7 +104,7 @@ enum xcan_reg { #define XCAN_INTR_ALL (XCAN_IXR_TXOK_MASK | XCAN_IXR_BSOFF_MASK |\ XCAN_IXR_WKUP_MASK | XCAN_IXR_SLP_MASK | \ XCAN_IXR_RXNEMP_MASK | XCAN_IXR_ERROR_MASK | \ - XCAN_IXR_ARBLST_MASK) + XCAN_IXR_RXOFLW_MASK | XCAN_IXR_ARBLST_MASK) /* CAN register bit shift - XCAN___SHIFT */ #define XCAN_BTR_SJW_SHIFT 7 /* Synchronous jump width */ -- cgit v1.2.3 From 2f4f0f338cf453bfcdbcf089e177c16f35f023c8 Mon Sep 17 00:00:00 2001 From: Anssi Hannula Date: Mon, 26 Feb 2018 14:39:59 +0200 Subject: can: xilinx_can: fix incorrect clear of non-processed interrupts xcan_interrupt() clears ERROR|RXOFLV|BSOFF|ARBLST interrupts if any of them is asserted. This does not take into account that some of them could have been asserted between interrupt status read and interrupt clear, therefore clearing them without handling them. Fix the code to only clear those interrupts that it knows are asserted and therefore going to be processed in xcan_err_interrupt(). Fixes: b1201e44f50b ("can: xilinx CAN controller support") Signed-off-by: Anssi Hannula Cc: Michal Simek Cc: Signed-off-by: Marc Kleine-Budde --- drivers/net/can/xilinx_can.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c index ea9f9d1a5ba7..cb80a9aa7281 100644 --- a/drivers/net/can/xilinx_can.c +++ b/drivers/net/can/xilinx_can.c @@ -938,6 +938,7 @@ static irqreturn_t xcan_interrupt(int irq, void *dev_id) struct net_device *ndev = (struct net_device *)dev_id; struct xcan_priv *priv = netdev_priv(ndev); u32 isr, ier; + u32 isr_errors; /* Get the interrupt status from Xilinx CAN */ isr = priv->read_reg(priv, XCAN_ISR_OFFSET); @@ -956,11 +957,10 @@ static irqreturn_t xcan_interrupt(int irq, void *dev_id) xcan_tx_interrupt(ndev, isr); /* Check for the type of error interrupt and Processing it */ - if (isr & (XCAN_IXR_ERROR_MASK | XCAN_IXR_RXOFLW_MASK | - XCAN_IXR_BSOFF_MASK | XCAN_IXR_ARBLST_MASK)) { - priv->write_reg(priv, XCAN_ICR_OFFSET, (XCAN_IXR_ERROR_MASK | - XCAN_IXR_RXOFLW_MASK | XCAN_IXR_BSOFF_MASK | - XCAN_IXR_ARBLST_MASK)); + isr_errors = isr & (XCAN_IXR_ERROR_MASK | XCAN_IXR_RXOFLW_MASK | + XCAN_IXR_BSOFF_MASK | XCAN_IXR_ARBLST_MASK); + if (isr_errors) { + priv->write_reg(priv, XCAN_ICR_OFFSET, isr_errors); xcan_err_interrupt(ndev, isr); } -- cgit v1.2.3 From 8ebd83bdb027f29870d96649dba18b91581ea829 Mon Sep 17 00:00:00 2001 From: Anssi Hannula Date: Thu, 17 May 2018 15:41:19 +0300 Subject: can: xilinx_can: fix power management handling There are several issues with the suspend/resume handling code of the driver: - The device is attached and detached in the runtime_suspend() and runtime_resume() callbacks if the interface is running. However, during xcan_chip_start() the interface is considered running, causing the resume handler to incorrectly call netif_start_queue() at the beginning of xcan_chip_start(), and on xcan_chip_start() error return the suspend handler detaches the device leaving the user unable to bring-up the device anymore. - The device is not brought properly up on system resume. A reset is done and the code tries to determine the bus state after that. However, after reset the device is always in Configuration mode (down), so the state checking code does not make sense and communication will also not work. - The suspend callback tries to set the device to sleep mode (low-power mode which monitors the bus and brings the device back to normal mode on activity), but then immediately disables the clocks (possibly before the device reaches the sleep mode), which does not make sense to me. If a clean shutdown is wanted before disabling clocks, we can just bring it down completely instead of only sleep mode. Reorganize the PM code so that only the clock logic remains in the runtime PM callbacks and the system PM callbacks contain the device bring-up/down logic. This makes calling the runtime PM callbacks during e.g. xcan_chip_start() safe. The system PM callbacks now simply call common code to start/stop the HW if the interface was running, replacing the broken code from before. xcan_chip_stop() is updated to use the common reset code so that it will wait for the reset to complete. Reset also disables all interrupts so do not do that separately. Also, the device_may_wakeup() checks are removed as the driver does not have wakeup support. Tested on Zynq-7000 integrated CAN. Signed-off-by: Anssi Hannula Cc: Michal Simek Cc: Signed-off-by: Marc Kleine-Budde --- drivers/net/can/xilinx_can.c | 69 ++++++++++++++++++-------------------------- 1 file changed, 28 insertions(+), 41 deletions(-) diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c index cb80a9aa7281..5a24039733ef 100644 --- a/drivers/net/can/xilinx_can.c +++ b/drivers/net/can/xilinx_can.c @@ -984,13 +984,9 @@ static irqreturn_t xcan_interrupt(int irq, void *dev_id) static void xcan_chip_stop(struct net_device *ndev) { struct xcan_priv *priv = netdev_priv(ndev); - u32 ier; /* Disable interrupts and leave the can in configuration mode */ - ier = priv->read_reg(priv, XCAN_IER_OFFSET); - ier &= ~XCAN_INTR_ALL; - priv->write_reg(priv, XCAN_IER_OFFSET, ier); - priv->write_reg(priv, XCAN_SRR_OFFSET, XCAN_SRR_RESET_MASK); + set_reset_mode(ndev); priv->can.state = CAN_STATE_STOPPED; } @@ -1123,10 +1119,15 @@ static const struct net_device_ops xcan_netdev_ops = { */ static int __maybe_unused xcan_suspend(struct device *dev) { - if (!device_may_wakeup(dev)) - return pm_runtime_force_suspend(dev); + struct net_device *ndev = dev_get_drvdata(dev); - return 0; + if (netif_running(ndev)) { + netif_stop_queue(ndev); + netif_device_detach(ndev); + xcan_chip_stop(ndev); + } + + return pm_runtime_force_suspend(dev); } /** @@ -1138,11 +1139,27 @@ static int __maybe_unused xcan_suspend(struct device *dev) */ static int __maybe_unused xcan_resume(struct device *dev) { - if (!device_may_wakeup(dev)) - return pm_runtime_force_resume(dev); + struct net_device *ndev = dev_get_drvdata(dev); + int ret; - return 0; + ret = pm_runtime_force_resume(dev); + if (ret) { + dev_err(dev, "pm_runtime_force_resume failed on resume\n"); + return ret; + } + + if (netif_running(ndev)) { + ret = xcan_chip_start(ndev); + if (ret) { + dev_err(dev, "xcan_chip_start failed on resume\n"); + return ret; + } + netif_device_attach(ndev); + netif_start_queue(ndev); + } + + return 0; } /** @@ -1157,14 +1174,6 @@ static int __maybe_unused xcan_runtime_suspend(struct device *dev) struct net_device *ndev = dev_get_drvdata(dev); struct xcan_priv *priv = netdev_priv(ndev); - if (netif_running(ndev)) { - netif_stop_queue(ndev); - netif_device_detach(ndev); - } - - priv->write_reg(priv, XCAN_MSR_OFFSET, XCAN_MSR_SLEEP_MASK); - priv->can.state = CAN_STATE_SLEEPING; - clk_disable_unprepare(priv->bus_clk); clk_disable_unprepare(priv->can_clk); @@ -1183,7 +1192,6 @@ static int __maybe_unused xcan_runtime_resume(struct device *dev) struct net_device *ndev = dev_get_drvdata(dev); struct xcan_priv *priv = netdev_priv(ndev); int ret; - u32 isr, status; ret = clk_prepare_enable(priv->bus_clk); if (ret) { @@ -1197,27 +1205,6 @@ static int __maybe_unused xcan_runtime_resume(struct device *dev) return ret; } - priv->write_reg(priv, XCAN_SRR_OFFSET, XCAN_SRR_RESET_MASK); - isr = priv->read_reg(priv, XCAN_ISR_OFFSET); - status = priv->read_reg(priv, XCAN_SR_OFFSET); - - if (netif_running(ndev)) { - if (isr & XCAN_IXR_BSOFF_MASK) { - priv->can.state = CAN_STATE_BUS_OFF; - priv->write_reg(priv, XCAN_SRR_OFFSET, - XCAN_SRR_RESET_MASK); - } else if ((status & XCAN_SR_ESTAT_MASK) == - XCAN_SR_ESTAT_MASK) { - priv->can.state = CAN_STATE_ERROR_PASSIVE; - } else if (status & XCAN_SR_ERRWRN_MASK) { - priv->can.state = CAN_STATE_ERROR_WARNING; - } else { - priv->can.state = CAN_STATE_ERROR_ACTIVE; - } - netif_device_attach(ndev); - netif_start_queue(ndev); - } - return 0; } -- cgit v1.2.3 From cc8de9a68599b261244ea453b38678229f06ada7 Mon Sep 17 00:00:00 2001 From: Alexander Sverdlin Date: Fri, 13 Jul 2018 17:20:17 +0200 Subject: i2c: davinci: Avoid zero value of CLKH If CLKH is set to 0 I2C clock is not generated at all, so avoid this value and stretch the clock in this case. Signed-off-by: Alexander Sverdlin Acked-by: Sekhar Nori Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-davinci.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c index 75d6ab177055..7379043711df 100644 --- a/drivers/i2c/busses/i2c-davinci.c +++ b/drivers/i2c/busses/i2c-davinci.c @@ -237,12 +237,16 @@ static void i2c_davinci_calc_clk_dividers(struct davinci_i2c_dev *dev) /* * It's not always possible to have 1 to 2 ratio when d=7, so fall back * to minimal possible clkh in this case. + * + * Note: + * CLKH is not allowed to be 0, in this case I2C clock is not generated + * at all */ - if (clk >= clkl + d) { + if (clk > clkl + d) { clkh = clk - clkl - d; clkl -= d; } else { - clkh = 0; + clkh = 1; clkl = clk - (d << 1); } -- cgit v1.2.3 From 9f9e3e0d4dd3338b3f3dde080789f71901e1e4ff Mon Sep 17 00:00:00 2001 From: Esben Haabendal Date: Mon, 9 Jul 2018 11:43:01 +0200 Subject: i2c: imx: Fix reinit_completion() use MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Make sure to call reinit_completion() before dma is started to avoid race condition where reinit_completion() is called after complete() and before wait_for_completion_timeout(). Signed-off-by: Esben Haabendal Fixes: ce1a78840ff7 ("i2c: imx: add DMA support for freescale i2c driver") Reviewed-by: Uwe Kleine-König Signed-off-by: Wolfram Sang Cc: stable@kernel.org --- drivers/i2c/busses/i2c-imx.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index 0207e194f84b..39cfd98c7b23 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -368,6 +368,7 @@ static int i2c_imx_dma_xfer(struct imx_i2c_struct *i2c_imx, goto err_desc; } + reinit_completion(&dma->cmd_complete); txdesc->callback = i2c_imx_dma_callback; txdesc->callback_param = i2c_imx; if (dma_submit_error(dmaengine_submit(txdesc))) { @@ -622,7 +623,6 @@ static int i2c_imx_dma_write(struct imx_i2c_struct *i2c_imx, * The first byte must be transmitted by the CPU. */ imx_i2c_write_reg(i2c_8bit_addr_from_msg(msgs), i2c_imx, IMX_I2C_I2DR); - reinit_completion(&i2c_imx->dma->cmd_complete); time_left = wait_for_completion_timeout( &i2c_imx->dma->cmd_complete, msecs_to_jiffies(DMA_TIMEOUT)); @@ -681,7 +681,6 @@ static int i2c_imx_dma_read(struct imx_i2c_struct *i2c_imx, if (result) return result; - reinit_completion(&i2c_imx->dma->cmd_complete); time_left = wait_for_completion_timeout( &i2c_imx->dma->cmd_complete, msecs_to_jiffies(DMA_TIMEOUT)); -- cgit v1.2.3 From e873e4b9cc7e8ce79e5c5627b32b107035bb3f5d Mon Sep 17 00:00:00 2001 From: Wei Wang Date: Sat, 21 Jul 2018 20:56:32 -0700 Subject: ipv6: use fib6_info_hold_safe() when necessary In the code path where only rcu read lock is held, e.g. in the route lookup code path, it is not safe to directly call fib6_info_hold() because the fib6_info may already have been deleted but still exists in the rcu grace period. Holding reference to it could cause double free and crash the kernel. This patch adds a new function fib6_info_hold_safe() and replace fib6_info_hold() in all necessary places. Syzbot reported 3 crash traces because of this. One of them is: 8021q: adding VLAN 0 to HW filter on device team0 IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready dst_release: dst:(____ptrval____) refcnt:-1 dst_release: dst:(____ptrval____) refcnt:-2 WARNING: CPU: 1 PID: 4845 at include/net/dst.h:239 dst_hold include/net/dst.h:239 [inline] WARNING: CPU: 1 PID: 4845 at include/net/dst.h:239 ip6_setup_cork+0xd66/0x1830 net/ipv6/ip6_output.c:1204 dst_release: dst:(____ptrval____) refcnt:-1 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 4845 Comm: syz-executor493 Not tainted 4.18.0-rc3+ #10 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113 panic+0x238/0x4e7 kernel/panic.c:184 dst_release: dst:(____ptrval____) refcnt:-2 dst_release: dst:(____ptrval____) refcnt:-3 __warn.cold.8+0x163/0x1ba kernel/panic.c:536 dst_release: dst:(____ptrval____) refcnt:-4 report_bug+0x252/0x2d0 lib/bug.c:186 fixup_bug arch/x86/kernel/traps.c:178 [inline] do_error_trap+0x1fc/0x4d0 arch/x86/kernel/traps.c:296 dst_release: dst:(____ptrval____) refcnt:-5 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:316 invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:992 RIP: 0010:dst_hold include/net/dst.h:239 [inline] RIP: 0010:ip6_setup_cork+0xd66/0x1830 net/ipv6/ip6_output.c:1204 Code: c1 ed 03 89 9d 18 ff ff ff 48 b8 00 00 00 00 00 fc ff df 41 c6 44 05 00 f8 e9 2d 01 00 00 4c 8b a5 c8 fe ff ff e8 1a f6 e6 fa <0f> 0b e9 6a fc ff ff e8 0e f6 e6 fa 48 8b 85 d0 fe ff ff 48 8d 78 RSP: 0018:ffff8801a8fcf178 EFLAGS: 00010293 RAX: ffff8801a8eba5c0 RBX: 0000000000000000 RCX: ffffffff869511e6 RDX: 0000000000000000 RSI: ffffffff869515b6 RDI: 0000000000000005 RBP: ffff8801a8fcf2c8 R08: ffff8801a8eba5c0 R09: ffffed0035ac8338 R10: ffffed0035ac8338 R11: ffff8801ad6419c3 R12: ffff8801a8fcf720 R13: ffff8801a8fcf6a0 R14: ffff8801ad6419c0 R15: ffff8801ad641980 ip6_make_skb+0x2c8/0x600 net/ipv6/ip6_output.c:1768 udpv6_sendmsg+0x2c90/0x35f0 net/ipv6/udp.c:1376 inet_sendmsg+0x1a1/0x690 net/ipv4/af_inet.c:798 sock_sendmsg_nosec net/socket.c:641 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:651 ___sys_sendmsg+0x51d/0x930 net/socket.c:2125 __sys_sendmmsg+0x240/0x6f0 net/socket.c:2220 __do_sys_sendmmsg net/socket.c:2249 [inline] __se_sys_sendmmsg net/socket.c:2246 [inline] __x64_sys_sendmmsg+0x9d/0x100 net/socket.c:2246 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x446ba9 Code: e8 cc bb 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fb39a469da8 EFLAGS: 00000246 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 00000000006dcc54 RCX: 0000000000446ba9 RDX: 00000000000000b8 RSI: 0000000020001b00 RDI: 0000000000000003 RBP: 00000000006dcc50 R08: 00007fb39a46a700 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 45c828efc7a64843 R13: e6eeb815b9d8a477 R14: 5068caf6f713c6fc R15: 0000000000000001 Dumping ftrace buffer: (ftrace buffer empty) Kernel Offset: disabled Rebooting in 86400 seconds.. Fixes: 93531c674315 ("net/ipv6: separate handling of FIB entries from dst based routes") Reported-by: syzbot+902e2a1bcd4f7808cef5@syzkaller.appspotmail.com Reported-by: syzbot+8ae62d67f647abeeceb9@syzkaller.appspotmail.com Reported-by: syzbot+3f08feb14086930677d0@syzkaller.appspotmail.com Signed-off-by: Wei Wang Acked-by: Eric Dumazet Reviewed-by: David Ahern Signed-off-by: David S. Miller --- include/net/ip6_fib.h | 5 +++++ net/ipv6/addrconf.c | 3 ++- net/ipv6/route.c | 41 +++++++++++++++++++++++++++++++---------- 3 files changed, 38 insertions(+), 11 deletions(-) diff --git a/include/net/ip6_fib.h b/include/net/ip6_fib.h index 71b9043aa0e7..3d4930528db0 100644 --- a/include/net/ip6_fib.h +++ b/include/net/ip6_fib.h @@ -281,6 +281,11 @@ static inline void fib6_info_hold(struct fib6_info *f6i) atomic_inc(&f6i->fib6_ref); } +static inline bool fib6_info_hold_safe(struct fib6_info *f6i) +{ + return atomic_inc_not_zero(&f6i->fib6_ref); +} + static inline void fib6_info_release(struct fib6_info *f6i) { if (f6i && atomic_dec_and_test(&f6i->fib6_ref)) diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index 91580c62bb86..f66a1cae3366 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -2374,7 +2374,8 @@ static struct fib6_info *addrconf_get_prefix_route(const struct in6_addr *pfx, continue; if ((rt->fib6_flags & noflags) != 0) continue; - fib6_info_hold(rt); + if (!fib6_info_hold_safe(rt)) + continue; break; } out: diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 2ce0bd17de4f..ec18b3ce8b6d 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -972,10 +972,10 @@ static void ip6_rt_init_dst(struct rt6_info *rt, struct fib6_info *ort) rt->dst.lastuse = jiffies; } +/* Caller must already hold reference to @from */ static void rt6_set_from(struct rt6_info *rt, struct fib6_info *from) { rt->rt6i_flags &= ~RTF_EXPIRES; - fib6_info_hold(from); rcu_assign_pointer(rt->from, from); dst_init_metrics(&rt->dst, from->fib6_metrics->metrics, true); if (from->fib6_metrics != &dst_default_metrics) { @@ -984,6 +984,7 @@ static void rt6_set_from(struct rt6_info *rt, struct fib6_info *from) } } +/* Caller must already hold reference to @ort */ static void ip6_rt_copy_init(struct rt6_info *rt, struct fib6_info *ort) { struct net_device *dev = fib6_info_nh_dev(ort); @@ -1044,9 +1045,14 @@ static struct rt6_info *ip6_create_rt_rcu(struct fib6_info *rt) struct net_device *dev = rt->fib6_nh.nh_dev; struct rt6_info *nrt; + if (!fib6_info_hold_safe(rt)) + return NULL; + nrt = ip6_dst_alloc(dev_net(dev), dev, flags); if (nrt) ip6_rt_copy_init(nrt, rt); + else + fib6_info_release(rt); return nrt; } @@ -1178,10 +1184,15 @@ static struct rt6_info *ip6_rt_cache_alloc(struct fib6_info *ort, * Clone the route. */ + if (!fib6_info_hold_safe(ort)) + return NULL; + dev = ip6_rt_get_dev_rcu(ort); rt = ip6_dst_alloc(dev_net(dev), dev, 0); - if (!rt) + if (!rt) { + fib6_info_release(ort); return NULL; + } ip6_rt_copy_init(rt, ort); rt->rt6i_flags |= RTF_CACHE; @@ -1210,12 +1221,17 @@ static struct rt6_info *ip6_rt_pcpu_alloc(struct fib6_info *rt) struct net_device *dev; struct rt6_info *pcpu_rt; + if (!fib6_info_hold_safe(rt)) + return NULL; + rcu_read_lock(); dev = ip6_rt_get_dev_rcu(rt); pcpu_rt = ip6_dst_alloc(dev_net(dev), dev, flags); rcu_read_unlock(); - if (!pcpu_rt) + if (!pcpu_rt) { + fib6_info_release(rt); return NULL; + } ip6_rt_copy_init(pcpu_rt, rt); pcpu_rt->rt6i_flags |= RTF_PCPU; return pcpu_rt; @@ -2486,7 +2502,7 @@ restart: out: if (ret) - dst_hold(&ret->dst); + ip6_hold_safe(net, &ret, true); else ret = ip6_create_rt_rcu(rt); @@ -3303,7 +3319,8 @@ static int ip6_route_del(struct fib6_config *cfg, continue; if (cfg->fc_protocol && cfg->fc_protocol != rt->fib6_protocol) continue; - fib6_info_hold(rt); + if (!fib6_info_hold_safe(rt)) + continue; rcu_read_unlock(); /* if gateway was specified only delete the one hop */ @@ -3409,6 +3426,9 @@ static void rt6_do_redirect(struct dst_entry *dst, struct sock *sk, struct sk_bu rcu_read_lock(); from = rcu_dereference(rt->from); + /* This fib6_info_hold() is safe here because we hold reference to rt + * and rt already holds reference to fib6_info. + */ fib6_info_hold(from); rcu_read_unlock(); @@ -3470,7 +3490,8 @@ static struct fib6_info *rt6_get_route_info(struct net *net, continue; if (!ipv6_addr_equal(&rt->fib6_nh.nh_gw, gwaddr)) continue; - fib6_info_hold(rt); + if (!fib6_info_hold_safe(rt)) + continue; break; } out: @@ -3530,8 +3551,8 @@ struct fib6_info *rt6_get_dflt_router(struct net *net, ipv6_addr_equal(&rt->fib6_nh.nh_gw, addr)) break; } - if (rt) - fib6_info_hold(rt); + if (rt && !fib6_info_hold_safe(rt)) + rt = NULL; rcu_read_unlock(); return rt; } @@ -3579,8 +3600,8 @@ restart: struct inet6_dev *idev = dev ? __in6_dev_get(dev) : NULL; if (rt->fib6_flags & (RTF_DEFAULT | RTF_ADDRCONF) && - (!idev || idev->cnf.accept_ra != 2)) { - fib6_info_hold(rt); + (!idev || idev->cnf.accept_ra != 2) && + fib6_info_hold_safe(rt)) { rcu_read_unlock(); ip6_del_rt(net, rt); goto restart; -- cgit v1.2.3 From 3dd1c9a1270736029ffca670e9bd0265f4120600 Mon Sep 17 00:00:00 2001 From: Paolo Abeni Date: Mon, 23 Jul 2018 16:50:48 +0200 Subject: ip: hash fragments consistently The skb hash for locally generated ip[v6] fragments belonging to the same datagram can vary in several circumstances: * for connected UDP[v6] sockets, the first fragment get its hash via set_owner_w()/skb_set_hash_from_sk() * for unconnected IPv6 UDPv6 sockets, the first fragment can get its hash via ip6_make_flowlabel()/skb_get_hash_flowi6(), if auto_flowlabel is enabled For the following frags the hash is usually computed via skb_get_hash(). The above can cause OoO for unconnected IPv6 UDPv6 socket: in that scenario the egress tx queue can be selected on a per packet basis via the skb hash. It may also fool flow-oriented schedulers to place fragments belonging to the same datagram in different flows. Fix the issue by copying the skb hash from the head frag into the others at fragmentation time. Before this commit: perf probe -a "dev_queue_xmit skb skb->hash skb->l4_hash:b1@0/8 skb->sw_hash:b1@1/8" netperf -H $IPV4 -t UDP_STREAM -l 5 -- -m 2000 -n & perf record -e probe:dev_queue_xmit -e probe:skb_set_owner_w -a sleep 0.1 perf script probe:dev_queue_xmit: (ffffffff8c6b1b20) hash=3713014309 l4_hash=1 sw_hash=0 probe:dev_queue_xmit: (ffffffff8c6b1b20) hash=0 l4_hash=0 sw_hash=0 After this commit: probe:dev_queue_xmit: (ffffffff8c6b1b20) hash=2171763177 l4_hash=1 sw_hash=0 probe:dev_queue_xmit: (ffffffff8c6b1b20) hash=2171763177 l4_hash=1 sw_hash=0 Fixes: b73c3d0e4f0e ("net: Save TX flow hash in sock and set in skbuf on xmit") Fixes: 67800f9b1f4e ("ipv6: Call skb_get_hash_flowi6 to get skb->hash in ip6_make_flowlabel") Signed-off-by: Paolo Abeni Reviewed-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/ip_output.c | 2 ++ net/ipv6/ip6_output.c | 2 ++ 2 files changed, 4 insertions(+) diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c index b3308e9d9762..0e3edd25f881 100644 --- a/net/ipv4/ip_output.c +++ b/net/ipv4/ip_output.c @@ -523,6 +523,8 @@ static void ip_copy_metadata(struct sk_buff *to, struct sk_buff *from) to->dev = from->dev; to->mark = from->mark; + skb_copy_hash(to, from); + /* Copy the flags to each fragment. */ IPCB(to)->flags = IPCB(from)->flags; diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index a14fb4fcdf18..3168847c30d1 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -570,6 +570,8 @@ static void ip6_copy_metadata(struct sk_buff *to, struct sk_buff *from) to->dev = from->dev; to->mark = from->mark; + skb_copy_hash(to, from); + #ifdef CONFIG_NET_SCHED to->tc_index = from->tc_index; #endif -- cgit v1.2.3 From 72cd43ba64fc172a443410ce01645895850844c8 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 23 Jul 2018 09:28:17 -0700 Subject: tcp: free batches of packets in tcp_prune_ofo_queue() Juha-Matti Tilli reported that malicious peers could inject tiny packets in out_of_order_queue, forcing very expensive calls to tcp_collapse_ofo_queue() and tcp_prune_ofo_queue() for every incoming packet. out_of_order_queue rb-tree can contain thousands of nodes, iterating over all of them is not nice. Before linux-4.9, we would have pruned all packets in ofo_queue in one go, every XXXX packets. XXXX depends on sk_rcvbuf and skbs truesize, but is about 7000 packets with tcp_rmem[2] default of 6 MB. Since we plan to increase tcp_rmem[2] in the future to cope with modern BDP, can not revert to the old behavior, without great pain. Strategy taken in this patch is to purge ~12.5 % of the queue capacity. Fixes: 36a6503fedda ("tcp: refine tcp_prune_ofo_queue() to not drop all packets") Signed-off-by: Eric Dumazet Reported-by: Juha-Matti Tilli Acked-by: Yuchung Cheng Acked-by: Soheil Hassas Yeganeh Signed-off-by: David S. Miller --- net/ipv4/tcp_input.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 6bade06aaf72..64e45b279431 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -4942,6 +4942,7 @@ new_range: * 2) not add too big latencies if thousands of packets sit there. * (But if application shrinks SO_RCVBUF, we could still end up * freeing whole queue here) + * 3) Drop at least 12.5 % of sk_rcvbuf to avoid malicious attacks. * * Return true if queue has shrunk. */ @@ -4949,20 +4950,26 @@ static bool tcp_prune_ofo_queue(struct sock *sk) { struct tcp_sock *tp = tcp_sk(sk); struct rb_node *node, *prev; + int goal; if (RB_EMPTY_ROOT(&tp->out_of_order_queue)) return false; NET_INC_STATS(sock_net(sk), LINUX_MIB_OFOPRUNED); + goal = sk->sk_rcvbuf >> 3; node = &tp->ooo_last_skb->rbnode; do { prev = rb_prev(node); rb_erase(node, &tp->out_of_order_queue); + goal -= rb_to_skb(node)->truesize; tcp_drop(sk, rb_to_skb(node)); - sk_mem_reclaim(sk); - if (atomic_read(&sk->sk_rmem_alloc) <= sk->sk_rcvbuf && - !tcp_under_memory_pressure(sk)) - break; + if (!prev || goal <= 0) { + sk_mem_reclaim(sk); + if (atomic_read(&sk->sk_rmem_alloc) <= sk->sk_rcvbuf && + !tcp_under_memory_pressure(sk)) + break; + goal = sk->sk_rcvbuf >> 3; + } node = prev; } while (node); tp->ooo_last_skb = rb_to_skb(prev); -- cgit v1.2.3 From f4a3313d8e2ca9fd8d8f45e40a2903ba782607e7 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 23 Jul 2018 09:28:18 -0700 Subject: tcp: avoid collapses in tcp_prune_queue() if possible Right after a TCP flow is created, receiving tiny out of order packets allways hit the condition : if (atomic_read(&sk->sk_rmem_alloc) >= sk->sk_rcvbuf) tcp_clamp_window(sk); tcp_clamp_window() increases sk_rcvbuf to match sk_rmem_alloc (guarded by tcp_rmem[2]) Calling tcp_collapse_ofo_queue() in this case is not useful, and offers a O(N^2) surface attack to malicious peers. Better not attempt anything before full queue capacity is reached, forcing attacker to spend lots of resource and allow us to more easily detect the abuse. Signed-off-by: Eric Dumazet Acked-by: Soheil Hassas Yeganeh Acked-by: Yuchung Cheng Signed-off-by: David S. Miller --- net/ipv4/tcp_input.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 64e45b279431..53289911362a 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -5004,6 +5004,9 @@ static int tcp_prune_queue(struct sock *sk) else if (tcp_under_memory_pressure(sk)) tp->rcv_ssthresh = min(tp->rcv_ssthresh, 4U * tp->advmss); + if (atomic_read(&sk->sk_rmem_alloc) <= sk->sk_rcvbuf) + return 0; + tcp_collapse_ofo_queue(sk); if (!skb_queue_empty(&sk->sk_receive_queue)) tcp_collapse(sk, &sk->sk_receive_queue, NULL, -- cgit v1.2.3 From 3d4bf93ac12003f9b8e1e2de37fe27983deebdcf Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 23 Jul 2018 09:28:19 -0700 Subject: tcp: detect malicious patterns in tcp_collapse_ofo_queue() In case an attacker feeds tiny packets completely out of order, tcp_collapse_ofo_queue() might scan the whole rb-tree, performing expensive copies, but not changing socket memory usage at all. 1) Do not attempt to collapse tiny skbs. 2) Add logic to exit early when too many tiny skbs are detected. We prefer not doing aggressive collapsing (which copies packets) for pathological flows, and revert to tcp_prune_ofo_queue() which will be less expensive. In the future, we might add the possibility of terminating flows that are proven to be malicious. Signed-off-by: Eric Dumazet Acked-by: Soheil Hassas Yeganeh Signed-off-by: David S. Miller --- net/ipv4/tcp_input.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 53289911362a..78068b902e7b 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -4902,6 +4902,7 @@ end: static void tcp_collapse_ofo_queue(struct sock *sk) { struct tcp_sock *tp = tcp_sk(sk); + u32 range_truesize, sum_tiny = 0; struct sk_buff *skb, *head; u32 start, end; @@ -4913,6 +4914,7 @@ new_range: } start = TCP_SKB_CB(skb)->seq; end = TCP_SKB_CB(skb)->end_seq; + range_truesize = skb->truesize; for (head = skb;;) { skb = skb_rb_next(skb); @@ -4923,11 +4925,20 @@ new_range: if (!skb || after(TCP_SKB_CB(skb)->seq, end) || before(TCP_SKB_CB(skb)->end_seq, start)) { - tcp_collapse(sk, NULL, &tp->out_of_order_queue, - head, skb, start, end); + /* Do not attempt collapsing tiny skbs */ + if (range_truesize != head->truesize || + end - start >= SKB_WITH_OVERHEAD(SK_MEM_QUANTUM)) { + tcp_collapse(sk, NULL, &tp->out_of_order_queue, + head, skb, start, end); + } else { + sum_tiny += range_truesize; + if (sum_tiny > sk->sk_rcvbuf >> 3) + return; + } goto new_range; } + range_truesize += skb->truesize; if (unlikely(before(TCP_SKB_CB(skb)->seq, start))) start = TCP_SKB_CB(skb)->seq; if (after(TCP_SKB_CB(skb)->end_seq, end)) -- cgit v1.2.3 From 8541b21e781a22dce52a74fef0b9bed00404a1cd Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 23 Jul 2018 09:28:20 -0700 Subject: tcp: call tcp_drop() from tcp_data_queue_ofo() In order to be able to give better diagnostics and detect malicious traffic, we need to have better sk->sk_drops tracking. Fixes: 9f5afeae5152 ("tcp: use an RB tree for ooo receive queue") Signed-off-by: Eric Dumazet Acked-by: Soheil Hassas Yeganeh Acked-by: Yuchung Cheng Signed-off-by: David S. Miller --- net/ipv4/tcp_input.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 78068b902e7b..b062a7692238 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -4510,7 +4510,7 @@ coalesce_done: /* All the bits are present. Drop. */ NET_INC_STATS(sock_net(sk), LINUX_MIB_TCPOFOMERGE); - __kfree_skb(skb); + tcp_drop(sk, skb); skb = NULL; tcp_dsack_set(sk, seq, end_seq); goto add_sack; @@ -4529,7 +4529,7 @@ coalesce_done: TCP_SKB_CB(skb1)->end_seq); NET_INC_STATS(sock_net(sk), LINUX_MIB_TCPOFOMERGE); - __kfree_skb(skb1); + tcp_drop(sk, skb1); goto merge_right; } } else if (tcp_try_coalesce(sk, skb1, -- cgit v1.2.3 From 58152ecbbcc6a0ce7fddd5bf5f6ee535834ece0c Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 23 Jul 2018 09:28:21 -0700 Subject: tcp: add tcp_ooo_try_coalesce() helper In case skb in out_or_order_queue is the result of multiple skbs coalescing, we would like to get a proper gso_segs counter tracking, so that future tcp_drop() can report an accurate number. I chose to not implement this tracking for skbs in receive queue, since they are not dropped, unless socket is disconnected. Signed-off-by: Eric Dumazet Acked-by: Soheil Hassas Yeganeh Acked-by: Yuchung Cheng Signed-off-by: David S. Miller --- net/ipv4/tcp_input.c | 25 +++++++++++++++++++++---- 1 file changed, 21 insertions(+), 4 deletions(-) diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index b062a7692238..3bcd30a2ba06 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -4358,6 +4358,23 @@ static bool tcp_try_coalesce(struct sock *sk, return true; } +static bool tcp_ooo_try_coalesce(struct sock *sk, + struct sk_buff *to, + struct sk_buff *from, + bool *fragstolen) +{ + bool res = tcp_try_coalesce(sk, to, from, fragstolen); + + /* In case tcp_drop() is called later, update to->gso_segs */ + if (res) { + u32 gso_segs = max_t(u16, 1, skb_shinfo(to)->gso_segs) + + max_t(u16, 1, skb_shinfo(from)->gso_segs); + + skb_shinfo(to)->gso_segs = min_t(u32, gso_segs, 0xFFFF); + } + return res; +} + static void tcp_drop(struct sock *sk, struct sk_buff *skb) { sk_drops_add(sk, skb); @@ -4481,8 +4498,8 @@ static void tcp_data_queue_ofo(struct sock *sk, struct sk_buff *skb) /* In the typical case, we are adding an skb to the end of the list. * Use of ooo_last_skb avoids the O(Log(N)) rbtree lookup. */ - if (tcp_try_coalesce(sk, tp->ooo_last_skb, - skb, &fragstolen)) { + if (tcp_ooo_try_coalesce(sk, tp->ooo_last_skb, + skb, &fragstolen)) { coalesce_done: tcp_grow_window(sk, skb); kfree_skb_partial(skb, fragstolen); @@ -4532,8 +4549,8 @@ coalesce_done: tcp_drop(sk, skb1); goto merge_right; } - } else if (tcp_try_coalesce(sk, skb1, - skb, &fragstolen)) { + } else if (tcp_ooo_try_coalesce(sk, skb1, + skb, &fragstolen)) { goto coalesce_done; } p = &parent->rb_right; -- cgit v1.2.3 From 2f562a4739602d96928de0b040ce46b00d8d3adc Mon Sep 17 00:00:00 2001 From: Liang Chen Date: Mon, 23 Jul 2018 17:25:21 +0800 Subject: ASoC: rockchip-i2s: add description for px30 Add "rockchip,px30-i2s", "rockchip,rk3066-i2s" for i2s on px30 platform. Acked-by: Rob Herring Signed-off-by: Liang Chen Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/rockchip-i2s.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt index b208a752576c..54aefab71f2c 100644 --- a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt +++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt @@ -7,6 +7,7 @@ Required properties: - compatible: should be one of the following: - "rockchip,rk3066-i2s": for rk3066 + - "rockchip,px30-i2s", "rockchip,rk3066-i2s": for px30 - "rockchip,rk3036-i2s", "rockchip,rk3066-i2s": for rk3036 - "rockchip,rk3188-i2s", "rockchip,rk3066-i2s": for rk3188 - "rockchip,rk3228-i2s", "rockchip,rk3066-i2s": for rk3228 -- cgit v1.2.3 From 906402a44b5d090e9c330c562b8aa65c80790ccc Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 11 Jun 2018 15:11:41 +0200 Subject: gpio: of: Handle fixed regulator flags properly This fixes up the handling of fixed regulator polarity inversion flags: while I remembered to fix it for the undocumented "reg-fixed-voltage" I forgot about the official "regulator-fixed" binding, there are two ways to do a fixed regulator. The error was noticed and fixed. Fixes: a603a2b8d86e ("gpio: of: Add special quirk to parse regulator flags") Cc: Mark Brown Cc: Thierry Reding Reported-by: Thierry Reding Signed-off-by: Linus Walleij --- drivers/gpio/gpiolib-of.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c index 28d968088131..53a14ee8ad6d 100644 --- a/drivers/gpio/gpiolib-of.c +++ b/drivers/gpio/gpiolib-of.c @@ -64,7 +64,8 @@ static void of_gpio_flags_quirks(struct device_node *np, * Note that active low is the default. */ if (IS_ENABLED(CONFIG_REGULATOR) && - (of_device_is_compatible(np, "reg-fixed-voltage") || + (of_device_is_compatible(np, "regulator-fixed") || + of_device_is_compatible(np, "reg-fixed-voltage") || of_device_is_compatible(np, "regulator-gpio"))) { /* * The regulator GPIO handles are specified such that the -- cgit v1.2.3 From bbfbf04c2d4ef673f657175456f6693c9225748a Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Thu, 14 Jun 2018 14:27:45 +0900 Subject: gpio: uniphier: set legitimate irq trigger type in .to_irq hook If a GPIO chip is a part of a hierarchy IRQ domain, there is no way to specify the trigger type when gpio(d)_to_irq() allocates an interrupt on-the-fly. Currently, uniphier_gpio_to_irq() sets IRQ_TYPE_NONE, but it causes an error in the .alloc() hook of the parent domain. (drivers/irq/irq-uniphier-aidet.c) Even if we change irq-uniphier-aidet.c to accept the NONE type, GIC complains about it since commit 83a86fbb5b56 ("irqchip/gic: Loudly complain about the use of IRQ_TYPE_NONE"). Instead, use IRQ_TYPE_LEVEL_HIGH as a temporary value when an irq is allocated. irq_set_irq_type() will override it when the irq is really requested. Fixes: dbe776c2ca54 ("gpio: uniphier: add UniPhier GPIO controller driver") Reported-by: Katsuhiro Suzuki Signed-off-by: Masahiro Yamada Tested-by: Katsuhiro Suzuki Signed-off-by: Linus Walleij --- drivers/gpio/gpio-uniphier.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/gpio/gpio-uniphier.c b/drivers/gpio/gpio-uniphier.c index d3cf9502e7e7..58faeb1cef63 100644 --- a/drivers/gpio/gpio-uniphier.c +++ b/drivers/gpio/gpio-uniphier.c @@ -181,7 +181,11 @@ static int uniphier_gpio_to_irq(struct gpio_chip *chip, unsigned int offset) fwspec.fwnode = of_node_to_fwnode(chip->parent->of_node); fwspec.param_count = 2; fwspec.param[0] = offset - UNIPHIER_GPIO_IRQ_OFFSET; - fwspec.param[1] = IRQ_TYPE_NONE; + /* + * IRQ_TYPE_NONE is rejected by the parent irq domain. Set LEVEL_HIGH + * temporarily. Anyway, ->irq_set_type() will override it later. + */ + fwspec.param[1] = IRQ_TYPE_LEVEL_HIGH; return irq_create_fwspec_mapping(&fwspec); } -- cgit v1.2.3 From 90fd131afc565159c9e0ea742f082b337e10f8c6 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Mon, 23 Jul 2018 12:47:14 +0200 Subject: netfilter: nf_tables: move dumper state allocation into ->start Shaochun Chen points out we leak dumper filter state allocations stored in dump_control->data in case there is an error before netlink sets cb_running (after which ->done will be called at some point). In order to fix this, add .start functions and do the allocations there. ->done is going to clean up, and in case error occurs before ->start invocation no cleanups need to be done anymore. Reported-by: shaochun chen Signed-off-by: Florian Westphal Acked-by: David S. Miller Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_tables_api.c | 219 ++++++++++++++++++++++-------------------- 1 file changed, 115 insertions(+), 104 deletions(-) diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index d7b9748e338e..f5745e4c6513 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -2271,6 +2271,39 @@ done: return skb->len; } +static int nf_tables_dump_rules_start(struct netlink_callback *cb) +{ + const struct nlattr * const *nla = cb->data; + struct nft_rule_dump_ctx *ctx = NULL; + + if (nla[NFTA_RULE_TABLE] || nla[NFTA_RULE_CHAIN]) { + ctx = kzalloc(sizeof(*ctx), GFP_ATOMIC); + if (!ctx) + return -ENOMEM; + + if (nla[NFTA_RULE_TABLE]) { + ctx->table = nla_strdup(nla[NFTA_RULE_TABLE], + GFP_ATOMIC); + if (!ctx->table) { + kfree(ctx); + return -ENOMEM; + } + } + if (nla[NFTA_RULE_CHAIN]) { + ctx->chain = nla_strdup(nla[NFTA_RULE_CHAIN], + GFP_ATOMIC); + if (!ctx->chain) { + kfree(ctx->table); + kfree(ctx); + return -ENOMEM; + } + } + } + + cb->data = ctx; + return 0; +} + static int nf_tables_dump_rules_done(struct netlink_callback *cb) { struct nft_rule_dump_ctx *ctx = cb->data; @@ -2300,38 +2333,13 @@ static int nf_tables_getrule(struct net *net, struct sock *nlsk, if (nlh->nlmsg_flags & NLM_F_DUMP) { struct netlink_dump_control c = { + .start= nf_tables_dump_rules_start, .dump = nf_tables_dump_rules, .done = nf_tables_dump_rules_done, .module = THIS_MODULE, + .data = (void *)nla, }; - if (nla[NFTA_RULE_TABLE] || nla[NFTA_RULE_CHAIN]) { - struct nft_rule_dump_ctx *ctx; - - ctx = kzalloc(sizeof(*ctx), GFP_ATOMIC); - if (!ctx) - return -ENOMEM; - - if (nla[NFTA_RULE_TABLE]) { - ctx->table = nla_strdup(nla[NFTA_RULE_TABLE], - GFP_ATOMIC); - if (!ctx->table) { - kfree(ctx); - return -ENOMEM; - } - } - if (nla[NFTA_RULE_CHAIN]) { - ctx->chain = nla_strdup(nla[NFTA_RULE_CHAIN], - GFP_ATOMIC); - if (!ctx->chain) { - kfree(ctx->table); - kfree(ctx); - return -ENOMEM; - } - } - c.data = ctx; - } - return nft_netlink_dump_start_rcu(nlsk, skb, nlh, &c); } @@ -3181,6 +3189,18 @@ done: return skb->len; } +static int nf_tables_dump_sets_start(struct netlink_callback *cb) +{ + struct nft_ctx *ctx_dump = NULL; + + ctx_dump = kmemdup(cb->data, sizeof(*ctx_dump), GFP_ATOMIC); + if (ctx_dump == NULL) + return -ENOMEM; + + cb->data = ctx_dump; + return 0; +} + static int nf_tables_dump_sets_done(struct netlink_callback *cb) { kfree(cb->data); @@ -3208,18 +3228,12 @@ static int nf_tables_getset(struct net *net, struct sock *nlsk, if (nlh->nlmsg_flags & NLM_F_DUMP) { struct netlink_dump_control c = { + .start = nf_tables_dump_sets_start, .dump = nf_tables_dump_sets, .done = nf_tables_dump_sets_done, + .data = &ctx, .module = THIS_MODULE, }; - struct nft_ctx *ctx_dump; - - ctx_dump = kmalloc(sizeof(*ctx_dump), GFP_ATOMIC); - if (ctx_dump == NULL) - return -ENOMEM; - - *ctx_dump = ctx; - c.data = ctx_dump; return nft_netlink_dump_start_rcu(nlsk, skb, nlh, &c); } @@ -3869,6 +3883,15 @@ nla_put_failure: return -ENOSPC; } +static int nf_tables_dump_set_start(struct netlink_callback *cb) +{ + struct nft_set_dump_ctx *dump_ctx = cb->data; + + cb->data = kmemdup(dump_ctx, sizeof(*dump_ctx), GFP_ATOMIC); + + return cb->data ? 0 : -ENOMEM; +} + static int nf_tables_dump_set_done(struct netlink_callback *cb) { kfree(cb->data); @@ -4022,20 +4045,17 @@ static int nf_tables_getsetelem(struct net *net, struct sock *nlsk, if (nlh->nlmsg_flags & NLM_F_DUMP) { struct netlink_dump_control c = { + .start = nf_tables_dump_set_start, .dump = nf_tables_dump_set, .done = nf_tables_dump_set_done, .module = THIS_MODULE, }; - struct nft_set_dump_ctx *dump_ctx; - - dump_ctx = kmalloc(sizeof(*dump_ctx), GFP_ATOMIC); - if (!dump_ctx) - return -ENOMEM; - - dump_ctx->set = set; - dump_ctx->ctx = ctx; + struct nft_set_dump_ctx dump_ctx = { + .set = set, + .ctx = ctx, + }; - c.data = dump_ctx; + c.data = &dump_ctx; return nft_netlink_dump_start_rcu(nlsk, skb, nlh, &c); } @@ -4995,38 +5015,42 @@ done: return skb->len; } -static int nf_tables_dump_obj_done(struct netlink_callback *cb) +static int nf_tables_dump_obj_start(struct netlink_callback *cb) { - struct nft_obj_filter *filter = cb->data; + const struct nlattr * const *nla = cb->data; + struct nft_obj_filter *filter = NULL; - if (filter) { - kfree(filter->table); - kfree(filter); + if (nla[NFTA_OBJ_TABLE] || nla[NFTA_OBJ_TYPE]) { + filter = kzalloc(sizeof(*filter), GFP_ATOMIC); + if (!filter) + return -ENOMEM; + + if (nla[NFTA_OBJ_TABLE]) { + filter->table = nla_strdup(nla[NFTA_OBJ_TABLE], GFP_ATOMIC); + if (!filter->table) { + kfree(filter); + return -ENOMEM; + } + } + + if (nla[NFTA_OBJ_TYPE]) + filter->type = ntohl(nla_get_be32(nla[NFTA_OBJ_TYPE])); } + cb->data = filter; return 0; } -static struct nft_obj_filter * -nft_obj_filter_alloc(const struct nlattr * const nla[]) +static int nf_tables_dump_obj_done(struct netlink_callback *cb) { - struct nft_obj_filter *filter; - - filter = kzalloc(sizeof(*filter), GFP_ATOMIC); - if (!filter) - return ERR_PTR(-ENOMEM); + struct nft_obj_filter *filter = cb->data; - if (nla[NFTA_OBJ_TABLE]) { - filter->table = nla_strdup(nla[NFTA_OBJ_TABLE], GFP_ATOMIC); - if (!filter->table) { - kfree(filter); - return ERR_PTR(-ENOMEM); - } + if (filter) { + kfree(filter->table); + kfree(filter); } - if (nla[NFTA_OBJ_TYPE]) - filter->type = ntohl(nla_get_be32(nla[NFTA_OBJ_TYPE])); - return filter; + return 0; } /* called with rcu_read_lock held */ @@ -5047,21 +5071,13 @@ static int nf_tables_getobj(struct net *net, struct sock *nlsk, if (nlh->nlmsg_flags & NLM_F_DUMP) { struct netlink_dump_control c = { + .start = nf_tables_dump_obj_start, .dump = nf_tables_dump_obj, .done = nf_tables_dump_obj_done, .module = THIS_MODULE, + .data = (void *)nla, }; - if (nla[NFTA_OBJ_TABLE] || - nla[NFTA_OBJ_TYPE]) { - struct nft_obj_filter *filter; - - filter = nft_obj_filter_alloc(nla); - if (IS_ERR(filter)) - return -ENOMEM; - - c.data = filter; - } return nft_netlink_dump_start_rcu(nlsk, skb, nlh, &c); } @@ -5667,37 +5683,39 @@ done: return skb->len; } -static int nf_tables_dump_flowtable_done(struct netlink_callback *cb) +static int nf_tables_dump_flowtable_start(struct netlink_callback *cb) { - struct nft_flowtable_filter *filter = cb->data; + const struct nlattr * const *nla = cb->data; + struct nft_flowtable_filter *filter = NULL; - if (!filter) - return 0; + if (nla[NFTA_FLOWTABLE_TABLE]) { + filter = kzalloc(sizeof(*filter), GFP_ATOMIC); + if (!filter) + return -ENOMEM; - kfree(filter->table); - kfree(filter); + filter->table = nla_strdup(nla[NFTA_FLOWTABLE_TABLE], + GFP_ATOMIC); + if (!filter->table) { + kfree(filter); + return -ENOMEM; + } + } + cb->data = filter; return 0; } -static struct nft_flowtable_filter * -nft_flowtable_filter_alloc(const struct nlattr * const nla[]) +static int nf_tables_dump_flowtable_done(struct netlink_callback *cb) { - struct nft_flowtable_filter *filter; + struct nft_flowtable_filter *filter = cb->data; - filter = kzalloc(sizeof(*filter), GFP_ATOMIC); if (!filter) - return ERR_PTR(-ENOMEM); + return 0; - if (nla[NFTA_FLOWTABLE_TABLE]) { - filter->table = nla_strdup(nla[NFTA_FLOWTABLE_TABLE], - GFP_ATOMIC); - if (!filter->table) { - kfree(filter); - return ERR_PTR(-ENOMEM); - } - } - return filter; + kfree(filter->table); + kfree(filter); + + return 0; } /* called with rcu_read_lock held */ @@ -5717,20 +5735,13 @@ static int nf_tables_getflowtable(struct net *net, struct sock *nlsk, if (nlh->nlmsg_flags & NLM_F_DUMP) { struct netlink_dump_control c = { + .start = nf_tables_dump_flowtable_start, .dump = nf_tables_dump_flowtable, .done = nf_tables_dump_flowtable_done, .module = THIS_MODULE, + .data = (void *)nla, }; - if (nla[NFTA_FLOWTABLE_TABLE]) { - struct nft_flowtable_filter *filter; - - filter = nft_flowtable_filter_alloc(nla); - if (IS_ERR(filter)) - return -ENOMEM; - - c.data = filter; - } return nft_netlink_dump_start_rcu(nlsk, skb, nlh, &c); } -- cgit v1.2.3 From 6283fa38dc8744dc7c2bd2a03bb0478fe42f79fa Mon Sep 17 00:00:00 2001 From: Martin KaFai Lau Date: Fri, 20 Jul 2018 17:38:37 -0700 Subject: bpf: btf: Ensure the member->offset is in the right order This patch ensures the member->offset of a struct is in the correct order (i.e the later member's offset cannot go backward). The current "pahole -J" BTF encoder does not generate something like this. However, checking this can ensure future encoder will not violate this. Fixes: 69b693f0aefa ("bpf: btf: Introduce BPF Type Format (BTF)") Signed-off-by: Martin KaFai Lau Acked-by: Yonghong Song Signed-off-by: Daniel Borkmann --- kernel/bpf/btf.c | 14 +++++++++++++- tools/testing/selftests/bpf/test_btf.c | 28 ++++++++++++++++++++++++++++ 2 files changed, 41 insertions(+), 1 deletion(-) diff --git a/kernel/bpf/btf.c b/kernel/bpf/btf.c index 9704934252b3..2590700237c1 100644 --- a/kernel/bpf/btf.c +++ b/kernel/bpf/btf.c @@ -1519,9 +1519,9 @@ static s32 btf_struct_check_meta(struct btf_verifier_env *env, { bool is_union = BTF_INFO_KIND(t->info) == BTF_KIND_UNION; const struct btf_member *member; + u32 meta_needed, last_offset; struct btf *btf = env->btf; u32 struct_size = t->size; - u32 meta_needed; u16 i; meta_needed = btf_type_vlen(t) * sizeof(*member); @@ -1534,6 +1534,7 @@ static s32 btf_struct_check_meta(struct btf_verifier_env *env, btf_verifier_log_type(env, t, NULL); + last_offset = 0; for_each_member(i, t, member) { if (!btf_name_offset_valid(btf, member->name_off)) { btf_verifier_log_member(env, t, member, @@ -1555,6 +1556,16 @@ static s32 btf_struct_check_meta(struct btf_verifier_env *env, return -EINVAL; } + /* + * ">" instead of ">=" because the last member could be + * "char a[0];" + */ + if (last_offset > member->offset) { + btf_verifier_log_member(env, t, member, + "Invalid member bits_offset"); + return -EINVAL; + } + if (BITS_ROUNDUP_BYTES(member->offset) > struct_size) { btf_verifier_log_member(env, t, member, "Memmber bits_offset exceeds its struct size"); @@ -1562,6 +1573,7 @@ static s32 btf_struct_check_meta(struct btf_verifier_env *env, } btf_verifier_log_member(env, t, member, NULL); + last_offset = member->offset; } return meta_needed; diff --git a/tools/testing/selftests/bpf/test_btf.c b/tools/testing/selftests/bpf/test_btf.c index 3619f3023088..402c0f7cc418 100644 --- a/tools/testing/selftests/bpf/test_btf.c +++ b/tools/testing/selftests/bpf/test_btf.c @@ -247,6 +247,34 @@ static struct btf_raw_test raw_tests[] = { .max_entries = 4, }, +{ + .descr = "struct test #3 Invalid member offset", + .raw_types = { + /* int */ /* [1] */ + BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4), + /* int64 */ /* [2] */ + BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 64, 8), + + /* struct A { */ /* [3] */ + BTF_TYPE_ENC(NAME_TBD, BTF_INFO_ENC(BTF_KIND_STRUCT, 0, 2), 16), + BTF_MEMBER_ENC(NAME_TBD, 1, 64), /* int m; */ + BTF_MEMBER_ENC(NAME_TBD, 2, 0), /* int64 n; */ + /* } */ + BTF_END_RAW, + }, + .str_sec = "\0A\0m\0n\0", + .str_sec_size = sizeof("\0A\0m\0n\0"), + .map_type = BPF_MAP_TYPE_ARRAY, + .map_name = "struct_test3_map", + .key_size = sizeof(int), + .value_size = 16, + .key_type_id = 1, + .value_type_id = 3, + .max_entries = 4, + .btf_load_err = true, + .err_str = "Invalid member bits_offset", +}, + /* Test member exceeds the size of struct. * * struct A { -- cgit v1.2.3 From 144fe2bfd236dc814eae587aea7e2af03dbdd755 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Mon, 23 Jul 2018 22:37:54 +0200 Subject: sock: fix sg page frag coalescing in sk_alloc_sg Current sg coalescing logic in sk_alloc_sg() (latter is used by tls and sockmap) is not quite correct in that we do fetch the previous sg entry, however the subsequent check whether the refilled page frag from the socket is still the same as from the last entry with prior offset and length matching the start of the current buffer is comparing always the first sg list entry instead of the prior one. Fixes: 3c4d7559159b ("tls: kernel TLS support") Signed-off-by: Daniel Borkmann Acked-by: Dave Watson Signed-off-by: David S. Miller --- net/core/sock.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/core/sock.c b/net/core/sock.c index 9e8f65585b81..bc2d7a37297f 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -2277,9 +2277,9 @@ int sk_alloc_sg(struct sock *sk, int len, struct scatterlist *sg, pfrag->offset += use; sge = sg + sg_curr - 1; - if (sg_curr > first_coalesce && sg_page(sg) == pfrag->page && - sg->offset + sg->length == orig_offset) { - sg->length += use; + if (sg_curr > first_coalesce && sg_page(sge) == pfrag->page && + sge->offset + sge->length == orig_offset) { + sge->length += use; } else { sge = sg + sg_curr; sg_unmark_end(sge); -- cgit v1.2.3 From 2fba3573f1cf876ad94992c256c5c410039e60b4 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Tue, 24 Jul 2018 07:55:18 +0200 Subject: s390: disable gcc plugins The s390 build currently fails with the latent entropy plugin: arch/s390/kernel/als.o: In function `verify_facilities': als.c:(.init.text+0x24): undefined reference to `latent_entropy' als.c:(.init.text+0xae): undefined reference to `latent_entropy' make[3]: *** [arch/s390/boot/compressed/vmlinux] Error 1 make[2]: *** [arch/s390/boot/compressed/vmlinux] Error 2 make[1]: *** [bzImage] Error 2 This will be fixed with the early boot rework from Vasily, which is planned for the 4.19 merge window. For 4.18 the simplest solution is to disable the gcc plugins and reenable them after the early boot rework is upstream. Reported-by: Guenter Roeck Signed-off-by: Martin Schwidefsky --- arch/s390/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index e44bb2b2873e..8a1863d9ed53 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -140,7 +140,7 @@ config S390 select HAVE_FUNCTION_GRAPH_TRACER select HAVE_FUNCTION_TRACER select HAVE_FUTEX_CMPXCHG if FUTEX - select HAVE_GCC_PLUGINS + select HAVE_GCC_PLUGINS if BROKEN select HAVE_KERNEL_BZIP2 select HAVE_KERNEL_GZIP select HAVE_KERNEL_LZ4 -- cgit v1.2.3 From e31f6456c01c76f154e1b25cd54df97809a49edb Mon Sep 17 00:00:00 2001 From: Amar Singhal Date: Fri, 20 Jul 2018 12:15:18 -0700 Subject: cfg80211: never ignore user regulatory hint Currently user regulatory hint is ignored if all wiphys in the system are self managed. But the hint is not ignored if there is no wiphy in the system. This affects the global regulatory setting. Global regulatory setting needs to be maintained so that it can be applied to a new wiphy entering the system. Therefore, do not ignore user regulatory setting even if all wiphys in the system are self managed. Signed-off-by: Amar Singhal Signed-off-by: Johannes Berg --- net/wireless/reg.c | 28 +++------------------------- 1 file changed, 3 insertions(+), 25 deletions(-) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index bbe6298e4bb9..4fc66a117b7d 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -2240,7 +2240,9 @@ static void wiphy_update_regulatory(struct wiphy *wiphy, * as some drivers used this to restore its orig_* reg domain. */ if (initiator == NL80211_REGDOM_SET_BY_CORE && - wiphy->regulatory_flags & REGULATORY_CUSTOM_REG) + wiphy->regulatory_flags & REGULATORY_CUSTOM_REG && + !(wiphy->regulatory_flags & + REGULATORY_WIPHY_SELF_MANAGED)) reg_call_notifier(wiphy, lr); return; } @@ -2787,26 +2789,6 @@ static void notify_self_managed_wiphys(struct regulatory_request *request) } } -static bool reg_only_self_managed_wiphys(void) -{ - struct cfg80211_registered_device *rdev; - struct wiphy *wiphy; - bool self_managed_found = false; - - ASSERT_RTNL(); - - list_for_each_entry(rdev, &cfg80211_rdev_list, list) { - wiphy = &rdev->wiphy; - if (wiphy->regulatory_flags & REGULATORY_WIPHY_SELF_MANAGED) - self_managed_found = true; - else - return false; - } - - /* make sure at least one self-managed wiphy exists */ - return self_managed_found; -} - /* * Processes regulatory hints, this is all the NL80211_REGDOM_SET_BY_* * Regulatory hints come on a first come first serve basis and we @@ -2839,10 +2821,6 @@ static void reg_process_pending_hints(void) spin_unlock(®_requests_lock); notify_self_managed_wiphys(reg_request); - if (reg_only_self_managed_wiphys()) { - reg_free_request(reg_request); - return; - } reg_process_hint(reg_request); -- cgit v1.2.3 From d2753e6b4882a637a0e8fb3b9c2e15f33265300e Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 20 Jul 2018 10:39:07 +0200 Subject: perf/x86/amd/ibs: Don't access non-started event Paul Menzel reported the following bug: > Enabling the undefined behavior sanitizer and building GNU/Linux 4.18-rc5+ > (with some unrelated commits) with GCC 8.1.0 from Debian Sid/unstable, the > warning below is shown. > > > [ 2.111913] > > ================================================================================ > > [ 2.111917] UBSAN: Undefined behaviour in arch/x86/events/amd/ibs.c:582:24 > > [ 2.111919] member access within null pointer of type 'struct perf_event' > > [ 2.111926] CPU: 0 PID: 144 Comm: udevadm Not tainted 4.18.0-rc5-00316-g4864b68cedf2 #104 > > [ 2.111928] Hardware name: ASROCK E350M1/E350M1, BIOS TIMELESS 01/01/1970 > > [ 2.111930] Call Trace: > > [ 2.111943] dump_stack+0x55/0x89 > > [ 2.111949] ubsan_epilogue+0xb/0x33 > > [ 2.111953] handle_null_ptr_deref+0x7f/0x90 > > [ 2.111958] __ubsan_handle_type_mismatch_v1+0x55/0x60 > > [ 2.111964] perf_ibs_handle_irq+0x596/0x620 The code dereferences event before checking the STARTED bit. Patch below should cure the issue. The warning should not trigger, if I analyzed the thing correctly. (And Paul's testing confirms this.) Reported-by: Paul Menzel Tested-by: Paul Menzel Signed-off-by: Thomas Gleixner Cc: Alexander Shishkin Cc: Arnaldo Carvalho de Melo Cc: Borislav Petkov Cc: Jiri Olsa Cc: Linus Torvalds Cc: Paul Menzel Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Vince Weaver Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1807200958390.1580@nanos.tec.linutronix.de Signed-off-by: Ingo Molnar --- arch/x86/events/amd/ibs.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/x86/events/amd/ibs.c b/arch/x86/events/amd/ibs.c index 4b98101209a1..d50bb4dc0650 100644 --- a/arch/x86/events/amd/ibs.c +++ b/arch/x86/events/amd/ibs.c @@ -579,7 +579,7 @@ static int perf_ibs_handle_irq(struct perf_ibs *perf_ibs, struct pt_regs *iregs) { struct cpu_perf_ibs *pcpu = this_cpu_ptr(perf_ibs->pcpu); struct perf_event *event = pcpu->event; - struct hw_perf_event *hwc = &event->hw; + struct hw_perf_event *hwc; struct perf_sample_data data; struct perf_raw_record raw; struct pt_regs regs; @@ -602,6 +602,10 @@ fail: return 0; } + if (WARN_ON_ONCE(!event)) + goto fail; + + hwc = &event->hw; msr = hwc->config_base; buf = ibs_data.regs; rdmsrl(msr, *buf); -- cgit v1.2.3 From d9e6dbcf28f383bf08e6a3180972f5722e514a54 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Sat, 21 Jul 2018 17:19:19 -0400 Subject: x86/apic: Future-proof the TSC_DEADLINE quirk for SKX All SKX with stepping higher than 4 support the TSC_DEADLINE, no matter the microcode version. Without this patch, upcoming SKX steppings will not be able to use their TSC_DEADLINE timer. Signed-off-by: Len Brown Cc: # v4.14+ Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Fixes: 616dd5872e ("x86/apic: Update TSC_DEADLINE quirk with additional SKX stepping") Link: http://lkml.kernel.org/r/d0c7129e509660be9ec6b233284b8d42d90659e8.1532207856.git.len.brown@intel.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/apic.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 2aabd4cb0e3f..adbda5847b14 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -573,6 +573,9 @@ static u32 skx_deadline_rev(void) case 0x04: return 0x02000014; } + if (boot_cpu_data.x86_stepping > 4) + return 0; + return ~0U; } -- cgit v1.2.3 From b3681dd548d06deb2e1573890829dff4b15abf46 Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Sun, 22 Jul 2018 11:05:09 -0700 Subject: x86/entry/64: Remove %ebx handling from error_entry/exit error_entry and error_exit communicate the user vs. kernel status of the frame using %ebx. This is unnecessary -- the information is in regs->cs. Just use regs->cs. This makes error_entry simpler and makes error_exit more robust. It also fixes a nasty bug. Before all the Spectre nonsense, the xen_failsafe_callback entry point returned like this: ALLOC_PT_GPREGS_ON_STACK SAVE_C_REGS SAVE_EXTRA_REGS ENCODE_FRAME_POINTER jmp error_exit And it did not go through error_entry. This was bogus: RBX contained garbage, and error_exit expected a flag in RBX. Fortunately, it generally contained *nonzero* garbage, so the correct code path was used. As part of the Spectre fixes, code was added to clear RBX to mitigate certain speculation attacks. Now, depending on kernel configuration, RBX got zeroed and, when running some Wine workloads, the kernel crashes. This was introduced by: commit 3ac6d8c787b8 ("x86/entry/64: Clear registers for exceptions/interrupts, to reduce speculation attack surface") With this patch applied, RBX is no longer needed as a flag, and the problem goes away. I suspect that malicious userspace could use this bug to crash the kernel even without the offending patch applied, though. [ Historical note: I wrote this patch as a cleanup before I was aware of the bug it fixed. ] [ Note to stable maintainers: this should probably get applied to all kernels. If you're nervous about that, a more conservative fix to add xorl %ebx,%ebx; incl %ebx before the jump to error_exit should also fix the problem. ] Reported-and-tested-by: M. Vefa Bicakci Signed-off-by: Andy Lutomirski Cc: Boris Ostrovsky Cc: Borislav Petkov Cc: Brian Gerst Cc: Dave Hansen Cc: Denys Vlasenko Cc: Dominik Brodowski Cc: Greg KH Cc: H. Peter Anvin Cc: Josh Poimboeuf Cc: Juergen Gross Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: stable@vger.kernel.org Cc: xen-devel@lists.xenproject.org Fixes: 3ac6d8c787b8 ("x86/entry/64: Clear registers for exceptions/interrupts, to reduce speculation attack surface") Link: http://lkml.kernel.org/r/b5010a090d3586b2d6e06c7ad3ec5542d1241c45.1532282627.git.luto@kernel.org Signed-off-by: Ingo Molnar --- arch/x86/entry/entry_64.S | 18 ++++-------------- 1 file changed, 4 insertions(+), 14 deletions(-) diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S index 73a522d53b53..8ae7ffda8f98 100644 --- a/arch/x86/entry/entry_64.S +++ b/arch/x86/entry/entry_64.S @@ -981,7 +981,7 @@ ENTRY(\sym) call \do_sym - jmp error_exit /* %ebx: no swapgs flag */ + jmp error_exit .endif END(\sym) .endm @@ -1222,7 +1222,6 @@ END(paranoid_exit) /* * Save all registers in pt_regs, and switch GS if needed. - * Return: EBX=0: came from user mode; EBX=1: otherwise */ ENTRY(error_entry) UNWIND_HINT_FUNC @@ -1269,7 +1268,6 @@ ENTRY(error_entry) * for these here too. */ .Lerror_kernelspace: - incl %ebx leaq native_irq_return_iret(%rip), %rcx cmpq %rcx, RIP+8(%rsp) je .Lerror_bad_iret @@ -1303,28 +1301,20 @@ ENTRY(error_entry) /* * Pretend that the exception came from user mode: set up pt_regs - * as if we faulted immediately after IRET and clear EBX so that - * error_exit knows that we will be returning to user mode. + * as if we faulted immediately after IRET. */ mov %rsp, %rdi call fixup_bad_iret mov %rax, %rsp - decl %ebx jmp .Lerror_entry_from_usermode_after_swapgs END(error_entry) - -/* - * On entry, EBX is a "return to kernel mode" flag: - * 1: already in kernel mode, don't need SWAPGS - * 0: user gsbase is loaded, we need SWAPGS and standard preparation for return to usermode - */ ENTRY(error_exit) UNWIND_HINT_REGS DISABLE_INTERRUPTS(CLBR_ANY) TRACE_IRQS_OFF - testl %ebx, %ebx - jnz retint_kernel + testb $3, CS(%rsp) + jz retint_kernel jmp retint_user END(error_exit) -- cgit v1.2.3 From bafaf056e0734f7bca7d27716bb3c672e87bb0b1 Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Mon, 23 Jul 2018 20:34:29 +0800 Subject: cpufreq: qcom-kryo: add NULL entry to the end of_device_id array Make sure of_device_id tables are NULL terminated. Found by coccinelle spatch "misc/of_table.cocci" Signed-off-by: YueHaibing Acked-by: Ilia Lin Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/qcom-cpufreq-kryo.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/cpufreq/qcom-cpufreq-kryo.c b/drivers/cpufreq/qcom-cpufreq-kryo.c index 29389accf3e9..efc9a7ae4857 100644 --- a/drivers/cpufreq/qcom-cpufreq-kryo.c +++ b/drivers/cpufreq/qcom-cpufreq-kryo.c @@ -183,6 +183,7 @@ static struct platform_driver qcom_cpufreq_kryo_driver = { static const struct of_device_id qcom_cpufreq_kryo_match_list[] __initconst = { { .compatible = "qcom,apq8096", }, { .compatible = "qcom,msm8996", }, + {} }; /* -- cgit v1.2.3 From a241c3d95b8b985834d218eedde3923ed683e862 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 24 Jul 2018 11:36:45 +0200 Subject: ASoC: meson: axg-spdifout: select SND_PCM_IEC958 When CONFIG_SND_PCM_IEC958 is disabled, we get a link error for the new driver: sound/soc/meson/axg-spdifout.o: In function `axg_spdifout_hw_params': axg-spdifout.c:(.text+0x650): undefined reference to `snd_pcm_create_iec958_consumer_hw_params' The other users use 'select', so we should do the same here. Fixes: 53eb4b7aaa04 ("ASoC: meson: add axg spdif output") Signed-off-by: Arnd Bergmann Acked-by: Jerome Brunet Signed-off-by: Mark Brown --- sound/soc/meson/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/meson/Kconfig b/sound/soc/meson/Kconfig index 4cf93c05a982..8af8bc358a90 100644 --- a/sound/soc/meson/Kconfig +++ b/sound/soc/meson/Kconfig @@ -56,6 +56,7 @@ config SND_MESON_AXG_SOUND_CARD config SND_MESON_AXG_SPDIFOUT tristate "Amlogic AXG SPDIF Output Support" + select SND_PCM_IEC958 imply SND_SOC_SPDIF help Select Y or M to add support for SPDIF output serializer embedded -- cgit v1.2.3 From d96f8bd28cd0bae3e6702ae90df593628ef6906f Mon Sep 17 00:00:00 2001 From: Oder Chiou Date: Tue, 24 Jul 2018 15:49:23 +0800 Subject: ASoC: rt5514: Fix the issue of the delay volume applied The patch fixes the issue of the delay volume applied. Signed-off-by: Oder Chiou Signed-off-by: Mark Brown --- sound/soc/codecs/rt5514.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/soc/codecs/rt5514.c b/sound/soc/codecs/rt5514.c index 1570b91bf018..dca82dd6e3bf 100644 --- a/sound/soc/codecs/rt5514.c +++ b/sound/soc/codecs/rt5514.c @@ -64,8 +64,8 @@ static const struct reg_sequence rt5514_patch[] = { {RT5514_ANA_CTRL_LDO10, 0x00028604}, {RT5514_ANA_CTRL_ADCFED, 0x00000800}, {RT5514_ASRC_IN_CTRL1, 0x00000003}, - {RT5514_DOWNFILTER0_CTRL3, 0x10000362}, - {RT5514_DOWNFILTER1_CTRL3, 0x10000362}, + {RT5514_DOWNFILTER0_CTRL3, 0x10000352}, + {RT5514_DOWNFILTER1_CTRL3, 0x10000352}, }; static const struct reg_default rt5514_reg[] = { @@ -92,10 +92,10 @@ static const struct reg_default rt5514_reg[] = { {RT5514_ASRC_IN_CTRL1, 0x00000003}, {RT5514_DOWNFILTER0_CTRL1, 0x00020c2f}, {RT5514_DOWNFILTER0_CTRL2, 0x00020c2f}, - {RT5514_DOWNFILTER0_CTRL3, 0x10000362}, + {RT5514_DOWNFILTER0_CTRL3, 0x10000352}, {RT5514_DOWNFILTER1_CTRL1, 0x00020c2f}, {RT5514_DOWNFILTER1_CTRL2, 0x00020c2f}, - {RT5514_DOWNFILTER1_CTRL3, 0x10000362}, + {RT5514_DOWNFILTER1_CTRL3, 0x10000352}, {RT5514_ANA_CTRL_LDO10, 0x00028604}, {RT5514_ANA_CTRL_LDO18_16, 0x02000345}, {RT5514_ANA_CTRL_ADC12, 0x0000a2a8}, -- cgit v1.2.3 From 467b061f1ac80f323bedb56d20a24f7bc0d2cec5 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Mon, 23 Jul 2018 16:54:03 +0100 Subject: ASoC: core: add support to snd_soc_dai_get_channel_map() On Qualcomm platforms, specifically with SLIMbus interfaced codecs, the codec slim channel numbers are passed to DSP while configuring the slim audio path. Having get_channel_map() would allow dais to share such information across multiple dais. Signed-off-by: Srinivas Kandagatla Signed-off-by: Mark Brown --- include/sound/soc-dai.h | 8 ++++++++ sound/soc/soc-core.c | 22 ++++++++++++++++++++++ 2 files changed, 30 insertions(+) diff --git a/include/sound/soc-dai.h b/include/sound/soc-dai.h index a14bc0608ae9..f5d70041108f 100644 --- a/include/sound/soc-dai.h +++ b/include/sound/soc-dai.h @@ -138,6 +138,11 @@ int snd_soc_dai_set_tristate(struct snd_soc_dai *dai, int tristate); int snd_soc_dai_digital_mute(struct snd_soc_dai *dai, int mute, int direction); + +int snd_soc_dai_get_channel_map(struct snd_soc_dai *dai, + unsigned int *tx_num, unsigned int *tx_slot, + unsigned int *rx_num, unsigned int *rx_slot); + int snd_soc_dai_is_dummy(struct snd_soc_dai *dai); struct snd_soc_dai_ops { @@ -165,6 +170,9 @@ struct snd_soc_dai_ops { int (*set_channel_map)(struct snd_soc_dai *dai, unsigned int tx_num, unsigned int *tx_slot, unsigned int rx_num, unsigned int *rx_slot); + int (*get_channel_map)(struct snd_soc_dai *dai, + unsigned int *tx_num, unsigned int *tx_slot, + unsigned int *rx_num, unsigned int *rx_slot); int (*set_tristate)(struct snd_soc_dai *dai, int tristate); int (*set_sdw_stream)(struct snd_soc_dai *dai, diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index ad5b0ef16d82..81b27923303d 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -2679,6 +2679,28 @@ int snd_soc_dai_set_channel_map(struct snd_soc_dai *dai, } EXPORT_SYMBOL_GPL(snd_soc_dai_set_channel_map); +/** + * snd_soc_dai_get_channel_map - Get DAI audio channel map + * @dai: DAI + * @tx_num: how many TX channels + * @tx_slot: pointer to an array which imply the TX slot number channel + * 0~num-1 uses + * @rx_num: how many RX channels + * @rx_slot: pointer to an array which imply the RX slot number channel + * 0~num-1 uses + */ +int snd_soc_dai_get_channel_map(struct snd_soc_dai *dai, + unsigned int *tx_num, unsigned int *tx_slot, + unsigned int *rx_num, unsigned int *rx_slot) +{ + if (dai->driver->ops->get_channel_map) + return dai->driver->ops->get_channel_map(dai, tx_num, tx_slot, + rx_num, rx_slot); + else + return -ENOTSUPP; +} +EXPORT_SYMBOL_GPL(snd_soc_dai_get_channel_map); + /** * snd_soc_dai_set_tristate - configure DAI system or master clock. * @dai: DAI -- cgit v1.2.3 From d082dc1562a2ff0947b214796f12faaa87e816a9 Mon Sep 17 00:00:00 2001 From: James Smart Date: Mon, 16 Jul 2018 14:38:14 -0700 Subject: nvmet-fc: fix target sgl list on large transfers The existing code to carve up the sg list expected an sg element-per-page which can be very incorrect with iommu's remapping multiple memory pages to fewer bus addresses. To hit this error required a large io payload (greater than 256k) and a system that maps on a per-page basis. It's possible that large ios could get by fine if the system condensed the sgl list into the first 64 elements. This patch corrects the sg list handling by specifically walking the sg list element by element and attempting to divide the transfer up on a per-sg element boundary. While doing so, it still tries to keep sequences under 256k, but will exceed that rule if a single sg element is larger than 256k. Fixes: 48fa362b6c3f ("nvmet-fc: simplify sg list handling") Cc: # 4.14 Signed-off-by: James Smart Signed-off-by: Christoph Hellwig --- drivers/nvme/target/fc.c | 44 +++++++++++++++++++++++++++++++++++--------- 1 file changed, 35 insertions(+), 9 deletions(-) diff --git a/drivers/nvme/target/fc.c b/drivers/nvme/target/fc.c index 408279cb6f2c..29b4b236afd8 100644 --- a/drivers/nvme/target/fc.c +++ b/drivers/nvme/target/fc.c @@ -58,8 +58,8 @@ struct nvmet_fc_ls_iod { struct work_struct work; } __aligned(sizeof(unsigned long long)); +/* desired maximum for a single sequence - if sg list allows it */ #define NVMET_FC_MAX_SEQ_LENGTH (256 * 1024) -#define NVMET_FC_MAX_XFR_SGENTS (NVMET_FC_MAX_SEQ_LENGTH / PAGE_SIZE) enum nvmet_fcp_datadir { NVMET_FCP_NODATA, @@ -74,6 +74,7 @@ struct nvmet_fc_fcp_iod { struct nvme_fc_cmd_iu cmdiubuf; struct nvme_fc_ersp_iu rspiubuf; dma_addr_t rspdma; + struct scatterlist *next_sg; struct scatterlist *data_sg; int data_sg_cnt; u32 offset; @@ -1025,8 +1026,7 @@ nvmet_fc_register_targetport(struct nvmet_fc_port_info *pinfo, INIT_LIST_HEAD(&newrec->assoc_list); kref_init(&newrec->ref); ida_init(&newrec->assoc_cnt); - newrec->max_sg_cnt = min_t(u32, NVMET_FC_MAX_XFR_SGENTS, - template->max_sgl_segments); + newrec->max_sg_cnt = template->max_sgl_segments; ret = nvmet_fc_alloc_ls_iodlist(newrec); if (ret) { @@ -1722,6 +1722,7 @@ nvmet_fc_alloc_tgt_pgs(struct nvmet_fc_fcp_iod *fod) ((fod->io_dir == NVMET_FCP_WRITE) ? DMA_FROM_DEVICE : DMA_TO_DEVICE)); /* note: write from initiator perspective */ + fod->next_sg = fod->data_sg; return 0; @@ -1866,24 +1867,49 @@ nvmet_fc_transfer_fcp_data(struct nvmet_fc_tgtport *tgtport, struct nvmet_fc_fcp_iod *fod, u8 op) { struct nvmefc_tgt_fcp_req *fcpreq = fod->fcpreq; + struct scatterlist *sg = fod->next_sg; unsigned long flags; - u32 tlen; + u32 remaininglen = fod->req.transfer_len - fod->offset; + u32 tlen = 0; int ret; fcpreq->op = op; fcpreq->offset = fod->offset; fcpreq->timeout = NVME_FC_TGTOP_TIMEOUT_SEC; - tlen = min_t(u32, tgtport->max_sg_cnt * PAGE_SIZE, - (fod->req.transfer_len - fod->offset)); + /* + * for next sequence: + * break at a sg element boundary + * attempt to keep sequence length capped at + * NVMET_FC_MAX_SEQ_LENGTH but allow sequence to + * be longer if a single sg element is larger + * than that amount. This is done to avoid creating + * a new sg list to use for the tgtport api. + */ + fcpreq->sg = sg; + fcpreq->sg_cnt = 0; + while (tlen < remaininglen && + fcpreq->sg_cnt < tgtport->max_sg_cnt && + tlen + sg_dma_len(sg) < NVMET_FC_MAX_SEQ_LENGTH) { + fcpreq->sg_cnt++; + tlen += sg_dma_len(sg); + sg = sg_next(sg); + } + if (tlen < remaininglen && fcpreq->sg_cnt == 0) { + fcpreq->sg_cnt++; + tlen += min_t(u32, sg_dma_len(sg), remaininglen); + sg = sg_next(sg); + } + if (tlen < remaininglen) + fod->next_sg = sg; + else + fod->next_sg = NULL; + fcpreq->transfer_length = tlen; fcpreq->transferred_length = 0; fcpreq->fcp_error = 0; fcpreq->rsplen = 0; - fcpreq->sg = &fod->data_sg[fod->offset / PAGE_SIZE]; - fcpreq->sg_cnt = DIV_ROUND_UP(tlen, PAGE_SIZE); - /* * If the last READDATA request: check if LLDD supports * combined xfr with response. -- cgit v1.2.3 From 6cdefc6e2ad52170f89a8d0e8b1a1339f91834dc Mon Sep 17 00:00:00 2001 From: James Smart Date: Fri, 20 Jul 2018 15:49:48 -0700 Subject: nvme: if_ready checks to fail io to deleting controller The revised if_ready checks skipped over the case of returning error when the controller is being deleted. Instead it was returning BUSY, which caused the ios to retry, which caused the ns delete to hang waiting for the ios to drain. Stack trace of hang looks like: kworker/u64:2 D 0 74 2 0x80000000 Workqueue: nvme-delete-wq nvme_delete_ctrl_work [nvme_core] Call Trace: ? __schedule+0x26d/0x820 schedule+0x32/0x80 blk_mq_freeze_queue_wait+0x36/0x80 ? remove_wait_queue+0x60/0x60 blk_cleanup_queue+0x72/0x160 nvme_ns_remove+0x106/0x140 [nvme_core] nvme_remove_namespaces+0x7e/0xa0 [nvme_core] nvme_delete_ctrl_work+0x4d/0x80 [nvme_core] process_one_work+0x160/0x350 worker_thread+0x1c3/0x3d0 kthread+0xf5/0x130 ? process_one_work+0x350/0x350 ? kthread_bind+0x10/0x10 ret_from_fork+0x1f/0x30 Extend nvmf_fail_nonready_command() to supply the controller pointer so that the controller state can be looked at. Fail any io to a controller that is deleting. Fixes: 3bc32bb1186c ("nvme-fabrics: refactor queue ready check") Fixes: 35897b920c8a ("nvme-fabrics: fix and refine state checks in __nvmf_check_ready") Signed-off-by: James Smart Signed-off-by: Christoph Hellwig Tested-by: Ewan D. Milne Reviewed-by: Ewan D. Milne --- drivers/nvme/host/fabrics.c | 10 +++++++--- drivers/nvme/host/fabrics.h | 3 ++- drivers/nvme/host/fc.c | 2 +- drivers/nvme/host/rdma.c | 2 +- drivers/nvme/target/loop.c | 2 +- 5 files changed, 12 insertions(+), 7 deletions(-) diff --git a/drivers/nvme/host/fabrics.c b/drivers/nvme/host/fabrics.c index 903eb4545e26..f7efe5a58cc7 100644 --- a/drivers/nvme/host/fabrics.c +++ b/drivers/nvme/host/fabrics.c @@ -539,14 +539,18 @@ static struct nvmf_transport_ops *nvmf_lookup_transport( /* * For something we're not in a state to send to the device the default action * is to busy it and retry it after the controller state is recovered. However, - * anything marked for failfast or nvme multipath is immediately failed. + * if the controller is deleting or if anything is marked for failfast or + * nvme multipath it is immediately failed. * * Note: commands used to initialize the controller will be marked for failfast. * Note: nvme cli/ioctl commands are marked for failfast. */ -blk_status_t nvmf_fail_nonready_command(struct request *rq) +blk_status_t nvmf_fail_nonready_command(struct nvme_ctrl *ctrl, + struct request *rq) { - if (!blk_noretry_request(rq) && !(rq->cmd_flags & REQ_NVME_MPATH)) + if (ctrl->state != NVME_CTRL_DELETING && + ctrl->state != NVME_CTRL_DEAD && + !blk_noretry_request(rq) && !(rq->cmd_flags & REQ_NVME_MPATH)) return BLK_STS_RESOURCE; nvme_req(rq)->status = NVME_SC_ABORT_REQ; return BLK_STS_IOERR; diff --git a/drivers/nvme/host/fabrics.h b/drivers/nvme/host/fabrics.h index e1818a27aa2d..aa2fdb2a2e8f 100644 --- a/drivers/nvme/host/fabrics.h +++ b/drivers/nvme/host/fabrics.h @@ -162,7 +162,8 @@ void nvmf_unregister_transport(struct nvmf_transport_ops *ops); void nvmf_free_options(struct nvmf_ctrl_options *opts); int nvmf_get_address(struct nvme_ctrl *ctrl, char *buf, int size); bool nvmf_should_reconnect(struct nvme_ctrl *ctrl); -blk_status_t nvmf_fail_nonready_command(struct request *rq); +blk_status_t nvmf_fail_nonready_command(struct nvme_ctrl *ctrl, + struct request *rq); bool __nvmf_check_ready(struct nvme_ctrl *ctrl, struct request *rq, bool queue_live); diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c index 41d45a1b5c62..9bac912173ba 100644 --- a/drivers/nvme/host/fc.c +++ b/drivers/nvme/host/fc.c @@ -2272,7 +2272,7 @@ nvme_fc_queue_rq(struct blk_mq_hw_ctx *hctx, if (ctrl->rport->remoteport.port_state != FC_OBJSTATE_ONLINE || !nvmf_check_ready(&queue->ctrl->ctrl, rq, queue_ready)) - return nvmf_fail_nonready_command(rq); + return nvmf_fail_nonready_command(&queue->ctrl->ctrl, rq); ret = nvme_setup_cmd(ns, rq, sqe); if (ret) diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c index 518c5b09038c..66ec5985c9f3 100644 --- a/drivers/nvme/host/rdma.c +++ b/drivers/nvme/host/rdma.c @@ -1639,7 +1639,7 @@ static blk_status_t nvme_rdma_queue_rq(struct blk_mq_hw_ctx *hctx, WARN_ON_ONCE(rq->tag < 0); if (!nvmf_check_ready(&queue->ctrl->ctrl, rq, queue_ready)) - return nvmf_fail_nonready_command(rq); + return nvmf_fail_nonready_command(&queue->ctrl->ctrl, rq); dev = queue->device->dev; ib_dma_sync_single_for_cpu(dev, sqe->dma, diff --git a/drivers/nvme/target/loop.c b/drivers/nvme/target/loop.c index d8d91f04bd7e..ae7586b8be07 100644 --- a/drivers/nvme/target/loop.c +++ b/drivers/nvme/target/loop.c @@ -162,7 +162,7 @@ static blk_status_t nvme_loop_queue_rq(struct blk_mq_hw_ctx *hctx, blk_status_t ret; if (!nvmf_check_ready(&queue->ctrl->ctrl, req, queue_ready)) - return nvmf_fail_nonready_command(req); + return nvmf_fail_nonready_command(&queue->ctrl->ctrl, req); ret = nvme_setup_cmd(ns, req, &iod->cmd); if (ret) -- cgit v1.2.3 From 2b16fd63059ab9a46d473620749672dc342e1d21 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 28 Jun 2018 22:45:38 +0200 Subject: i2c: rcar: handle RXDMA HW behaviour on Gen3 On Gen3, we can only do RXDMA once per transfer reliably. For that, we must reset the device, then we can have RXDMA once. This patch implements this. When there is no reset controller or the reset fails, RXDMA will be blocked completely. Otherwise, it will be disabled after the first RXDMA transfer. Based on a commit from the BSP by Hiromitsu Yamasaki, yet completely refactored to handle multiple read messages within one transfer. Signed-off-by: Wolfram Sang Reviewed-by: Geert Uytterhoeven Signed-off-by: Wolfram Sang Cc: stable@kernel.org --- drivers/i2c/busses/i2c-rcar.c | 54 ++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 51 insertions(+), 3 deletions(-) diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c index 5e310efd9446..3c1c817f6968 100644 --- a/drivers/i2c/busses/i2c-rcar.c +++ b/drivers/i2c/busses/i2c-rcar.c @@ -32,6 +32,7 @@ #include #include #include +#include #include /* register offsets */ @@ -111,8 +112,9 @@ #define ID_ARBLOST (1 << 3) #define ID_NACK (1 << 4) /* persistent flags */ +#define ID_P_NO_RXDMA (1 << 30) /* HW forbids RXDMA sometimes */ #define ID_P_PM_BLOCKED (1 << 31) -#define ID_P_MASK ID_P_PM_BLOCKED +#define ID_P_MASK (ID_P_PM_BLOCKED | ID_P_NO_RXDMA) enum rcar_i2c_type { I2C_RCAR_GEN1, @@ -141,6 +143,8 @@ struct rcar_i2c_priv { struct dma_chan *dma_rx; struct scatterlist sg; enum dma_data_direction dma_direction; + + struct reset_control *rstc; }; #define rcar_i2c_priv_to_dev(p) ((p)->adap.dev.parent) @@ -370,6 +374,11 @@ static void rcar_i2c_dma_unmap(struct rcar_i2c_priv *priv) dma_unmap_single(chan->device->dev, sg_dma_address(&priv->sg), sg_dma_len(&priv->sg), priv->dma_direction); + /* Gen3 can only do one RXDMA per transfer and we just completed it */ + if (priv->devtype == I2C_RCAR_GEN3 && + priv->dma_direction == DMA_FROM_DEVICE) + priv->flags |= ID_P_NO_RXDMA; + priv->dma_direction = DMA_NONE; } @@ -407,8 +416,9 @@ static void rcar_i2c_dma(struct rcar_i2c_priv *priv) unsigned char *buf; int len; - /* Do not use DMA if it's not available or for messages < 8 bytes */ - if (IS_ERR(chan) || msg->len < 8 || !(msg->flags & I2C_M_DMA_SAFE)) + /* Do various checks to see if DMA is feasible at all */ + if (IS_ERR(chan) || msg->len < 8 || !(msg->flags & I2C_M_DMA_SAFE) || + (read && priv->flags & ID_P_NO_RXDMA)) return; if (read) { @@ -739,6 +749,25 @@ static void rcar_i2c_release_dma(struct rcar_i2c_priv *priv) } } +/* I2C is a special case, we need to poll the status of a reset */ +static int rcar_i2c_do_reset(struct rcar_i2c_priv *priv) +{ + int i, ret; + + ret = reset_control_reset(priv->rstc); + if (ret) + return ret; + + for (i = 0; i < LOOP_TIMEOUT; i++) { + ret = reset_control_status(priv->rstc); + if (ret == 0) + return 0; + udelay(1); + } + + return -ETIMEDOUT; +} + static int rcar_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) @@ -750,6 +779,16 @@ static int rcar_i2c_master_xfer(struct i2c_adapter *adap, pm_runtime_get_sync(dev); + /* Gen3 needs a reset before allowing RXDMA once */ + if (priv->devtype == I2C_RCAR_GEN3) { + priv->flags |= ID_P_NO_RXDMA; + if (!IS_ERR(priv->rstc)) { + ret = rcar_i2c_do_reset(priv); + if (ret == 0) + priv->flags &= ~ID_P_NO_RXDMA; + } + } + rcar_i2c_init(priv); ret = rcar_i2c_bus_barrier(priv); @@ -920,6 +959,15 @@ static int rcar_i2c_probe(struct platform_device *pdev) if (ret < 0) goto out_pm_put; + if (priv->devtype == I2C_RCAR_GEN3) { + priv->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL); + if (!IS_ERR(priv->rstc)) { + ret = reset_control_status(priv->rstc); + if (ret < 0) + priv->rstc = ERR_PTR(-ENOTSUPP); + } + } + /* Stay always active when multi-master to keep arbitration working */ if (of_property_read_bool(dev->of_node, "multi-master")) priv->flags |= ID_P_PM_BLOCKED; -- cgit v1.2.3 From d2d0ad2aec4a8f3fd15e000ed903d6beddf39644 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 13 Jul 2018 23:09:14 +0200 Subject: i2c: imx: use open drain for recovery GPIO I2C is open drain, so request the GPIO accordingly, even if pinmux did set it up correctly for in-kernel users in this case. Signed-off-by: Wolfram Sang Reviewed-by: Lucas Stach Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-imx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index 39cfd98c7b23..498c5e891649 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -1009,7 +1009,7 @@ static int i2c_imx_init_recovery_info(struct imx_i2c_struct *i2c_imx, i2c_imx->pinctrl_pins_gpio = pinctrl_lookup_state(i2c_imx->pinctrl, "gpio"); rinfo->sda_gpiod = devm_gpiod_get(&pdev->dev, "sda", GPIOD_IN); - rinfo->scl_gpiod = devm_gpiod_get(&pdev->dev, "scl", GPIOD_OUT_HIGH); + rinfo->scl_gpiod = devm_gpiod_get(&pdev->dev, "scl", GPIOD_OUT_HIGH_OPEN_DRAIN); if (PTR_ERR(rinfo->sda_gpiod) == -EPROBE_DEFER || PTR_ERR(rinfo->scl_gpiod) == -EPROBE_DEFER) { -- cgit v1.2.3 From 4799f6856fdd38c8078a190eca3288029287cf66 Mon Sep 17 00:00:00 2001 From: Ananth N Mavinakayanahalli Date: Tue, 17 Jul 2018 11:32:37 +0530 Subject: MAINTAINERS: Add Naveen N. Rao as kprobes co-maintainer Naveen has been contributing consistently reviewing and hardening kprobes for some time now. I have not been able to do the same due to other commitments. Signed-off-by: Ananth N Mavinakayanahalli Cc: Naveen N. Rao Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Anil S Keshavamurthy Cc: "David S. Miller" Cc: Masami Hiramatsu Cc: Arnaldo Carvalho de Melo Cc: Namhyung Kim Cc: Jiri Olsa Cc: akpm@linux-foundation.org Cc: mhiramat@kernel.org Link: http://lkml.kernel.org/r/153180735790.1914.15547706781664285286.stgit@thinktux Signed-off-by: Ingo Molnar --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 0fe4228f78cb..42a884c1b0f7 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7984,7 +7984,7 @@ F: lib/test_kmod.c F: tools/testing/selftests/kmod/ KPROBES -M: Ananth N Mavinakayanahalli +M: Naveen N. Rao M: Anil S Keshavamurthy M: "David S. Miller" M: Masami Hiramatsu -- cgit v1.2.3 From aa624a0a9243460b9037889a05663d3b9a9e8f99 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 24 Jul 2018 09:48:30 -0300 Subject: ASoC: fsl-asoc-card: Switch to SPDX identifier Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam Signed-off-by: Mark Brown --- sound/soc/fsl/fsl-asoc-card.c | 18 +++++++----------- 1 file changed, 7 insertions(+), 11 deletions(-) diff --git a/sound/soc/fsl/fsl-asoc-card.c b/sound/soc/fsl/fsl-asoc-card.c index 4a6750aa3637..07808c6d5461 100644 --- a/sound/soc/fsl/fsl-asoc-card.c +++ b/sound/soc/fsl/fsl-asoc-card.c @@ -1,14 +1,10 @@ -/* - * Freescale Generic ASoC Sound Card driver with ASRC - * - * Copyright (C) 2014 Freescale Semiconductor, Inc. - * - * Author: Nicolin Chen - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Freescale Generic ASoC Sound Card driver with ASRC +// +// Copyright (C) 2014 Freescale Semiconductor, Inc. +// +// Author: Nicolin Chen #include #include -- cgit v1.2.3 From 2ba28053686334075c8c8bff6c4f6e3fc9ac51ae Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 24 Jul 2018 09:48:31 -0300 Subject: ASoC: fsl_asrc: Switch to SPDX identifier Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam Signed-off-by: Mark Brown --- sound/soc/fsl/fsl_asrc.c | 18 +++++++----------- sound/soc/fsl/fsl_asrc.h | 5 +---- sound/soc/fsl/fsl_asrc_dma.c | 18 +++++++----------- 3 files changed, 15 insertions(+), 26 deletions(-) diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c index adfb8135d739..528e8b108422 100644 --- a/sound/soc/fsl/fsl_asrc.c +++ b/sound/soc/fsl/fsl_asrc.c @@ -1,14 +1,10 @@ -/* - * Freescale ASRC ALSA SoC Digital Audio Interface (DAI) driver - * - * Copyright (C) 2014 Freescale Semiconductor, Inc. - * - * Author: Nicolin Chen - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Freescale ASRC ALSA SoC Digital Audio Interface (DAI) driver +// +// Copyright (C) 2014 Freescale Semiconductor, Inc. +// +// Author: Nicolin Chen #include #include diff --git a/sound/soc/fsl/fsl_asrc.h b/sound/soc/fsl/fsl_asrc.h index d558dd5499a5..c60075112570 100644 --- a/sound/soc/fsl/fsl_asrc.h +++ b/sound/soc/fsl/fsl_asrc.h @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * fsl_asrc.h - Freescale ASRC ALSA SoC header file * * Copyright (C) 2014 Freescale Semiconductor, Inc. * * Author: Nicolin Chen - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #ifndef _FSL_ASRC_H diff --git a/sound/soc/fsl/fsl_asrc_dma.c b/sound/soc/fsl/fsl_asrc_dma.c index 565e16d8fe85..1033ac6631b0 100644 --- a/sound/soc/fsl/fsl_asrc_dma.c +++ b/sound/soc/fsl/fsl_asrc_dma.c @@ -1,14 +1,10 @@ -/* - * Freescale ASRC ALSA SoC Platform (DMA) driver - * - * Copyright (C) 2014 Freescale Semiconductor, Inc. - * - * Author: Nicolin Chen - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Freescale ASRC ALSA SoC Platform (DMA) driver +// +// Copyright (C) 2014 Freescale Semiconductor, Inc. +// +// Author: Nicolin Chen #include #include -- cgit v1.2.3 From ad47191a72ca0a95327e8bb16155e5e216f1d97d Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 24 Jul 2018 09:48:32 -0300 Subject: ASoC: fsl_utils: Switch to SPDX identifier Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam Signed-off-by: Mark Brown --- sound/soc/fsl/fsl_utils.c | 18 +++++++----------- sound/soc/fsl/fsl_utils.h | 7 ++----- 2 files changed, 9 insertions(+), 16 deletions(-) diff --git a/sound/soc/fsl/fsl_utils.c b/sound/soc/fsl/fsl_utils.c index 7592b0406370..7f0fa4b52223 100644 --- a/sound/soc/fsl/fsl_utils.c +++ b/sound/soc/fsl/fsl_utils.c @@ -1,14 +1,10 @@ -/** - * Freescale ALSA SoC Machine driver utility - * - * Author: Timur Tabi - * - * Copyright 2010 Freescale Semiconductor, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// Freescale ALSA SoC Machine driver utility +// +// Author: Timur Tabi +// +// Copyright 2010 Freescale Semiconductor, Inc. #include #include diff --git a/sound/soc/fsl/fsl_utils.h b/sound/soc/fsl/fsl_utils.h index 1687b66ef18e..c5dc2a14b492 100644 --- a/sound/soc/fsl/fsl_utils.h +++ b/sound/soc/fsl/fsl_utils.h @@ -1,13 +1,10 @@ -/** +/* SPDX-License-Identifier: GPL-2.0 */ +/* * Freescale ALSA SoC Machine driver utility * * Author: Timur Tabi * * Copyright 2010 Freescale Semiconductor, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. */ #ifndef _FSL_UTILS_H -- cgit v1.2.3 From 6b24e03ecf1ce188071d142115233b10ed8767b2 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 24 Jul 2018 09:48:33 -0300 Subject: ASoC: imx-sgtl5000: Switch to SPDX identifier Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam Signed-off-by: Mark Brown --- sound/soc/fsl/imx-sgtl5000.c | 15 ++++----------- 1 file changed, 4 insertions(+), 11 deletions(-) diff --git a/sound/soc/fsl/imx-sgtl5000.c b/sound/soc/fsl/imx-sgtl5000.c index b99e0b5e00e9..c29200cf755a 100644 --- a/sound/soc/fsl/imx-sgtl5000.c +++ b/sound/soc/fsl/imx-sgtl5000.c @@ -1,14 +1,7 @@ -/* - * Copyright 2012 Freescale Semiconductor, Inc. - * Copyright 2012 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright 2012 Freescale Semiconductor, Inc. +// Copyright 2012 Linaro Ltd. #include #include -- cgit v1.2.3 From 0894da849f145af51bde88a6b84f95b9c9e0bc66 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Mon, 23 Jul 2018 14:39:33 -0700 Subject: media: staging: omap4iss: Include asm/cacheflush.h after generic includes Including asm/cacheflush.h first results in the following build error when trying to build sparc32:allmodconfig, because 'struct page' has not been declared, and the function declaration ends up creating a separate (private) declaration of struct page (as a result of function arguments being in the scope of the function declaration and definition, not in global scope). The C scoping rules do not just affect variable visibility, they also affect type declaration visibility. The end result is that when the actual call site is seen in , the 'struct page' type in the caller is not the same 'struct page' that the function was declared with, resulting in: In file included from arch/sparc/include/asm/page.h:10:0, ... from drivers/staging/media/omap4iss/iss_video.c:15: include/linux/highmem.h: In function 'clear_user_highpage': include/linux/highmem.h:137:31: error: passing argument 1 of 'sparc_flush_page_to_ram' from incompatible pointer type Include generic includes files first to fix the problem. Fixes: fc96d58c10162 ("[media] v4l: omap4iss: Add support for OMAP4 camera interface - Video devices") Suggested-by: Linus Torvalds Acked-by: David S. Miller Cc: Randy Dunlap Signed-off-by: Guenter Roeck [ Added explanation of C scope rules - Linus ] Signed-off-by: Linus Torvalds --- drivers/staging/media/omap4iss/iss_video.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/staging/media/omap4iss/iss_video.c b/drivers/staging/media/omap4iss/iss_video.c index a3a83424a926..16478fe9e3f8 100644 --- a/drivers/staging/media/omap4iss/iss_video.c +++ b/drivers/staging/media/omap4iss/iss_video.c @@ -11,7 +11,6 @@ * (at your option) any later version. */ -#include #include #include #include @@ -24,6 +23,8 @@ #include #include +#include + #include "iss_video.h" #include "iss.h" -- cgit v1.2.3 From d4a34e16555708bab5b67e679a95f055d8ef9882 Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Tue, 24 Jul 2018 11:34:52 -0700 Subject: xfs: properly handle free inodes in extent hint validators When inodes are freed in xfs_ifree(), di_flags is cleared (so extent size hints are removed) but the actual extent size fields are left intact. This causes the extent hint validators to fail on freed inodes which once had extent size hints. This can be observed (for example) by running xfs/229 twice on a non-crc xfs filesystem, or presumably on V5 with ikeep. Fixes: 7d71a67 ("xfs: verify extent size hint is valid in inode verifier") Fixes: 02a0fda ("xfs: verify COW extent size hint is valid in inode verifier") Signed-off-by: Eric Sandeen Reviewed-by: Brian Foster Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong --- fs/xfs/libxfs/xfs_inode_buf.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/fs/xfs/libxfs/xfs_inode_buf.c b/fs/xfs/libxfs/xfs_inode_buf.c index 33dc34655ac3..30d1d60f1d46 100644 --- a/fs/xfs/libxfs/xfs_inode_buf.c +++ b/fs/xfs/libxfs/xfs_inode_buf.c @@ -731,7 +731,8 @@ xfs_inode_validate_extsize( if ((hint_flag || inherit_flag) && extsize == 0) return __this_address; - if (!(hint_flag || inherit_flag) && extsize != 0) + /* free inodes get flags set to zero but extsize remains */ + if (mode && !(hint_flag || inherit_flag) && extsize != 0) return __this_address; if (extsize_bytes % blocksize_bytes) @@ -777,7 +778,8 @@ xfs_inode_validate_cowextsize( if (hint_flag && cowextsize == 0) return __this_address; - if (!hint_flag && cowextsize != 0) + /* free inodes get flags set to zero but cowextsize remains */ + if (mode && !hint_flag && cowextsize != 0) return __this_address; if (hint_flag && rt_flag) -- cgit v1.2.3 From 0fc09f920983f61be625658c62cc40ac25a7b3a5 Mon Sep 17 00:00:00 2001 From: Keith Busch Date: Mon, 23 Jul 2018 08:37:50 -0600 Subject: blk-mq: export setting request completion state This is preparing for drivers that want to directly alter the state of their requests. No functional change here. Reviewed-by: Christoph Hellwig Signed-off-by: Keith Busch Signed-off-by: Jens Axboe --- block/blk-mq.c | 4 +--- include/linux/blk-mq.h | 14 ++++++++++++++ 2 files changed, 15 insertions(+), 3 deletions(-) diff --git a/block/blk-mq.c b/block/blk-mq.c index d394cdd8d8c6..5291a95ba362 100644 --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -558,10 +558,8 @@ static void __blk_mq_complete_request(struct request *rq) bool shared = false; int cpu; - if (cmpxchg(&rq->state, MQ_RQ_IN_FLIGHT, MQ_RQ_COMPLETE) != - MQ_RQ_IN_FLIGHT) + if (!blk_mq_mark_complete(rq)) return; - if (rq->internal_tag != -1) blk_mq_sched_completed_request(rq); diff --git a/include/linux/blk-mq.h b/include/linux/blk-mq.h index e3147eb74222..ca3f2c2edd85 100644 --- a/include/linux/blk-mq.h +++ b/include/linux/blk-mq.h @@ -287,6 +287,20 @@ void blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set, int nr_hw_queues); void blk_mq_quiesce_queue_nowait(struct request_queue *q); +/** + * blk_mq_mark_complete() - Set request state to complete + * @rq: request to set to complete state + * + * Returns true if request state was successfully set to complete. If + * successful, the caller is responsibile for seeing this request is ended, as + * blk_mq_complete_request will not work again. + */ +static inline bool blk_mq_mark_complete(struct request *rq) +{ + return cmpxchg(&rq->state, MQ_RQ_IN_FLIGHT, MQ_RQ_COMPLETE) == + MQ_RQ_IN_FLIGHT; +} + /* * Driver command data is immediately after the request. So subtract request * size to get back to the original request, add request size to get the PDU. -- cgit v1.2.3 From 065990bd198e0e67417c2c34e5e80140d4b8cef7 Mon Sep 17 00:00:00 2001 From: Keith Busch Date: Mon, 23 Jul 2018 08:37:51 -0600 Subject: scsi: set timed out out mq requests to complete The scsi block layer requires requests claimed by the error handling be completed by the error handler. A previous commit allowed completions to proceed for blk-mq, breaking that assumption. This patch prevents completions that may race with the timeout handler by marking the state to complete, restoring the previous behavior. Fixes: 12f5b931 ("blk-mq: Remove generation seqeunce") Reviewed-by: Christoph Hellwig Signed-off-by: Keith Busch Signed-off-by: Jens Axboe --- drivers/scsi/scsi_error.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 8932ae81a15a..2715cdaa669c 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -296,6 +296,20 @@ enum blk_eh_timer_return scsi_times_out(struct request *req) rtn = host->hostt->eh_timed_out(scmd); if (rtn == BLK_EH_DONE) { + /* + * For blk-mq, we must set the request state to complete now + * before sending the request to the scsi error handler. This + * will prevent a use-after-free in the event the LLD manages + * to complete the request before the error handler finishes + * processing this timed out request. + * + * If the request was already completed, then the LLD beat the + * time out handler from transferring the request to the scsi + * error handler. In that case we can return immediately as no + * further action is required. + */ + if (req->q->mq_ops && !blk_mq_mark_complete(req)) + return rtn; if (scsi_abort_command(scmd) != SUCCESS) { set_host_byte(scmd, DID_TIME_OUT); scsi_eh_scmd_add(scmd); -- cgit v1.2.3 From 18041b523692038d41751fd8046638c356d77a36 Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Tue, 24 Jul 2018 22:21:04 +0200 Subject: r8169: restore previous behavior to accept BIOS WoL settings Commit 7edf6d314cd0 tried to resolve an inconsistency (BIOS WoL settings are accepted, but device isn't wakeup-enabled) resulting from a previous broken-BIOS workaround by making disabled WoL the default. This however had some side effects, most likely due to a broken BIOS some systems don't properly resume from suspend when the MagicPacket WoL bit isn't set in the chip, see https://bugzilla.kernel.org/show_bug.cgi?id=200195 Therefore restore the WoL behavior from 4.16. Reported-by: Albert Astals Cid Fixes: 7edf6d314cd0 ("r8169: disable WOL per default") Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index a3f69901ac87..eaedc11ed686 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -7734,8 +7734,7 @@ static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) return rc; } - /* override BIOS settings, use userspace tools to enable WOL */ - __rtl8169_set_wol(tp, 0); + tp->saved_wolopts = __rtl8169_get_wol(tp); if (rtl_tbi_enabled(tp)) { tp->set_speed = rtl8169_set_speed_tbi; -- cgit v1.2.3 From 6d20caed9b92d0db005324281e10bb9fd4813a32 Mon Sep 17 00:00:00 2001 From: Leon Romanovsky Date: Tue, 24 Jul 2018 16:29:06 +0300 Subject: ARC: Add Ofer Levi as plat-eznps maintainer Signed-off-by: Leon Romanovsky Signed-off-by: Vineet Gupta --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 0fe4228f78cb..d6d86003fafd 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5444,6 +5444,7 @@ F: drivers/iommu/exynos-iommu.c EZchip NPS platform support M: Vineet Gupta +M: Ofer Levi S: Supported F: arch/arc/plat-eznps F: arch/arc/boot/dts/eznps.dts -- cgit v1.2.3 From addb8a6559f0f8b5a37582b7ca698358445a55bf Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Wed, 11 Jul 2018 11:23:52 +0300 Subject: RDMA/uverbs: Expand primary and alt AV port checks The commit cited below checked that the port numbers provided in the primary and alt AVs are legal. That is sufficient to prevent a kernel panic. However, it is not sufficient for correct operation. In Linux, AVs (both primary and alt) must be completely self-described. We do not accept an AV from userspace without an embedded port number. (This has been the case since kernel 3.14 commit dbf727de7440 ("IB/core: Use GID table in AH creation and dmac resolution")). For the primary AV, this embedded port number must match the port number specified with IB_QP_PORT. We also expect the port number embedded in the alt AV to match the alt_port_num value passed by the userspace driver in the modify_qp command base structure. Add these checks to modify_qp. Cc: # 4.16 Fixes: 5d4c05c3ee36 ("RDMA/uverbs: Sanitize user entered port numbers prior to access it") Signed-off-by: Jack Morgenstein Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/core/uverbs_cmd.c | 59 +++++++++++++++++++++++++++++++++--- 1 file changed, 54 insertions(+), 5 deletions(-) diff --git a/drivers/infiniband/core/uverbs_cmd.c b/drivers/infiniband/core/uverbs_cmd.c index cc06e8404e9b..583d3a10b940 100644 --- a/drivers/infiniband/core/uverbs_cmd.c +++ b/drivers/infiniband/core/uverbs_cmd.c @@ -1984,15 +1984,64 @@ static int modify_qp(struct ib_uverbs_file *file, goto release_qp; } - if ((cmd->base.attr_mask & IB_QP_AV) && - !rdma_is_port_valid(qp->device, cmd->base.dest.port_num)) { - ret = -EINVAL; - goto release_qp; + if ((cmd->base.attr_mask & IB_QP_AV)) { + if (!rdma_is_port_valid(qp->device, cmd->base.dest.port_num)) { + ret = -EINVAL; + goto release_qp; + } + + if (cmd->base.attr_mask & IB_QP_STATE && + cmd->base.qp_state == IB_QPS_RTR) { + /* We are in INIT->RTR TRANSITION (if we are not, + * this transition will be rejected in subsequent checks). + * In the INIT->RTR transition, we cannot have IB_QP_PORT set, + * but the IB_QP_STATE flag is required. + * + * Since kernel 3.14 (commit dbf727de7440), the uverbs driver, + * when IB_QP_AV is set, has required inclusion of a valid + * port number in the primary AV. (AVs are created and handled + * differently for infiniband and ethernet (RoCE) ports). + * + * Check the port number included in the primary AV against + * the port number in the qp struct, which was set (and saved) + * in the RST->INIT transition. + */ + if (cmd->base.dest.port_num != qp->real_qp->port) { + ret = -EINVAL; + goto release_qp; + } + } else { + /* We are in SQD->SQD. (If we are not, this transition will + * be rejected later in the verbs layer checks). + * Check for both IB_QP_PORT and IB_QP_AV, these can be set + * together in the SQD->SQD transition. + * + * If only IP_QP_AV was set, add in IB_QP_PORT as well (the + * verbs layer driver does not track primary port changes + * resulting from path migration. Thus, in SQD, if the primary + * AV is modified, the primary port should also be modified). + * + * Note that in this transition, the IB_QP_STATE flag + * is not allowed. + */ + if (((cmd->base.attr_mask & (IB_QP_AV | IB_QP_PORT)) + == (IB_QP_AV | IB_QP_PORT)) && + cmd->base.port_num != cmd->base.dest.port_num) { + ret = -EINVAL; + goto release_qp; + } + if ((cmd->base.attr_mask & (IB_QP_AV | IB_QP_PORT)) + == IB_QP_AV) { + cmd->base.attr_mask |= IB_QP_PORT; + cmd->base.port_num = cmd->base.dest.port_num; + } + } } if ((cmd->base.attr_mask & IB_QP_ALT_PATH) && (!rdma_is_port_valid(qp->device, cmd->base.alt_port_num) || - !rdma_is_port_valid(qp->device, cmd->base.alt_dest.port_num))) { + !rdma_is_port_valid(qp->device, cmd->base.alt_dest.port_num) || + cmd->base.alt_port_num != cmd->base.alt_dest.port_num)) { ret = -EINVAL; goto release_qp; } -- cgit v1.2.3 From 958c696f5a7274d9447a458ad7aa70719b29a50a Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Tue, 24 Jul 2018 14:27:55 +0300 Subject: net/mlx4_core: Save the qpn from the input modifier in RST2INIT wrapper Function mlx4_RST2INIT_QP_wrapper saved the qp number passed in the qp context, rather than the one passed in the input modifier. However, the qp number in the qp context is not defined as a required parameter by the FW. Therefore, drivers may choose to not specify the qp number in the qp context for the reset-to-init transition. Thus, we must save the qp number passed in the command input modifier -- which is always present. (This saved qp number is used as the input modifier for command 2RST_QP when a slave's qp's are destroyed). Fixes: c82e9aa0a8bc ("mlx4_core: resource tracking for HCA resources used by guests") Signed-off-by: Jack Morgenstein Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/resource_tracker.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c index 7b1b5ac986d0..31bd56727022 100644 --- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c +++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c @@ -2958,7 +2958,7 @@ int mlx4_RST2INIT_QP_wrapper(struct mlx4_dev *dev, int slave, u32 srqn = qp_get_srqn(qpc) & 0xffffff; int use_srq = (qp_get_srqn(qpc) >> 24) & 1; struct res_srq *srq; - int local_qpn = be32_to_cpu(qpc->local_qpn) & 0xffffff; + int local_qpn = vhcr->in_modifier & 0xffffff; err = adjust_qp_sched_queue(dev, slave, qpc, inbox); if (err) -- cgit v1.2.3 From ae2dcb28c24794a87e424a726a1cf1a61980f52d Mon Sep 17 00:00:00 2001 From: Sudarsana Reddy Kalluru Date: Tue, 24 Jul 2018 02:43:52 -0700 Subject: bnx2x: Fix invalid memory access in rss hash config path. Rx hash/filter table configuration uses rss_conf_obj to configure filters in the hardware. This object is initialized only when the interface is brought up. This patch adds driver changes to configure rss params only when the device is in opened state. In port disabled case, the config will be cached in the driver structure which will be applied in the successive load path. Please consider applying it to 'net' branch. Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c index da18aa239acb..a4a90b6cdb46 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c @@ -3388,14 +3388,18 @@ static int bnx2x_set_rss_flags(struct bnx2x *bp, struct ethtool_rxnfc *info) DP(BNX2X_MSG_ETHTOOL, "rss re-configured, UDP 4-tupple %s\n", udp_rss_requested ? "enabled" : "disabled"); - return bnx2x_rss(bp, &bp->rss_conf_obj, false, true); + if (bp->state == BNX2X_STATE_OPEN) + return bnx2x_rss(bp, &bp->rss_conf_obj, false, + true); } else if ((info->flow_type == UDP_V6_FLOW) && (bp->rss_conf_obj.udp_rss_v6 != udp_rss_requested)) { bp->rss_conf_obj.udp_rss_v6 = udp_rss_requested; DP(BNX2X_MSG_ETHTOOL, "rss re-configured, UDP 4-tupple %s\n", udp_rss_requested ? "enabled" : "disabled"); - return bnx2x_rss(bp, &bp->rss_conf_obj, false, true); + if (bp->state == BNX2X_STATE_OPEN) + return bnx2x_rss(bp, &bp->rss_conf_obj, false, + true); } return 0; @@ -3509,7 +3513,10 @@ static int bnx2x_set_rxfh(struct net_device *dev, const u32 *indir, bp->rss_conf_obj.ind_table[i] = indir[i] + bp->fp->cl_id; } - return bnx2x_config_rss_eth(bp, false); + if (bp->state == BNX2X_STATE_OPEN) + return bnx2x_config_rss_eth(bp, false); + + return 0; } /** -- cgit v1.2.3 From 2efd4fca703a6707cad16ab486eaab8fc7f0fd49 Mon Sep 17 00:00:00 2001 From: Willem de Bruijn Date: Mon, 23 Jul 2018 19:36:48 -0400 Subject: ip: in cmsg IP(V6)_ORIGDSTADDR call pskb_may_pull Syzbot reported a read beyond the end of the skb head when returning IPV6_ORIGDSTADDR: BUG: KMSAN: kernel-infoleak in put_cmsg+0x5ef/0x860 net/core/scm.c:242 CPU: 0 PID: 4501 Comm: syz-executor128 Not tainted 4.17.0+ #9 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:113 kmsan_report+0x188/0x2a0 mm/kmsan/kmsan.c:1125 kmsan_internal_check_memory+0x138/0x1f0 mm/kmsan/kmsan.c:1219 kmsan_copy_to_user+0x7a/0x160 mm/kmsan/kmsan.c:1261 copy_to_user include/linux/uaccess.h:184 [inline] put_cmsg+0x5ef/0x860 net/core/scm.c:242 ip6_datagram_recv_specific_ctl+0x1cf3/0x1eb0 net/ipv6/datagram.c:719 ip6_datagram_recv_ctl+0x41c/0x450 net/ipv6/datagram.c:733 rawv6_recvmsg+0x10fb/0x1460 net/ipv6/raw.c:521 [..] This logic and its ipv4 counterpart read the destination port from the packet at skb_transport_offset(skb) + 4. With MSG_MORE and a local SOCK_RAW sender, syzbot was able to cook a packet that stores headers exactly up to skb_transport_offset(skb) in the head and the remainder in a frag. Call pskb_may_pull before accessing the pointer to ensure that it lies in skb head. Link: http://lkml.kernel.org/r/CAF=yD-LEJwZj5a1-bAAj2Oy_hKmGygV6rsJ_WOrAYnv-fnayiQ@mail.gmail.com Reported-by: syzbot+9adb4b567003cac781f0@syzkaller.appspotmail.com Signed-off-by: Willem de Bruijn Signed-off-by: David S. Miller --- net/ipv4/ip_sockglue.c | 7 +++++-- net/ipv6/datagram.c | 7 +++++-- 2 files changed, 10 insertions(+), 4 deletions(-) diff --git a/net/ipv4/ip_sockglue.c b/net/ipv4/ip_sockglue.c index 64c76dcf7386..c0fe5ad996f2 100644 --- a/net/ipv4/ip_sockglue.c +++ b/net/ipv4/ip_sockglue.c @@ -150,15 +150,18 @@ static void ip_cmsg_recv_dstaddr(struct msghdr *msg, struct sk_buff *skb) { struct sockaddr_in sin; const struct iphdr *iph = ip_hdr(skb); - __be16 *ports = (__be16 *)skb_transport_header(skb); + __be16 *ports; + int end; - if (skb_transport_offset(skb) + 4 > (int)skb->len) + end = skb_transport_offset(skb) + 4; + if (end > 0 && !pskb_may_pull(skb, end)) return; /* All current transport protocols have the port numbers in the * first four bytes of the transport header and this function is * written with this assumption in mind. */ + ports = (__be16 *)skb_transport_header(skb); sin.sin_family = AF_INET; sin.sin_addr.s_addr = iph->daddr; diff --git a/net/ipv6/datagram.c b/net/ipv6/datagram.c index 2ee08b6a86a4..1a1f876f8e28 100644 --- a/net/ipv6/datagram.c +++ b/net/ipv6/datagram.c @@ -700,13 +700,16 @@ void ip6_datagram_recv_specific_ctl(struct sock *sk, struct msghdr *msg, } if (np->rxopt.bits.rxorigdstaddr) { struct sockaddr_in6 sin6; - __be16 *ports = (__be16 *) skb_transport_header(skb); + __be16 *ports; + int end; - if (skb_transport_offset(skb) + 4 <= (int)skb->len) { + end = skb_transport_offset(skb) + 4; + if (end <= 0 || pskb_may_pull(skb, end)) { /* All current transport protocols have the port numbers in the * first four bytes of the transport header and this function is * written with this assumption in mind. */ + ports = (__be16 *)skb_transport_header(skb); sin6.sin6_family = AF_INET6; sin6.sin6_addr = ipv6_hdr(skb)->daddr; -- cgit v1.2.3 From f25e1392fdb556290957142ac2da33a02cbff403 Mon Sep 17 00:00:00 2001 From: Aleksander Morgado Date: Tue, 24 Jul 2018 01:31:07 +0200 Subject: qmi_wwan: fix interface number for DW5821e production firmware MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The original mapping for the DW5821e was done using a development version of the firmware. Confirmed with the vendor that the final USB layout ends up exposing the QMI control/data ports in USB config #1, interface #0, not in interface #1 (which is now a HID interface). T: Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 2 P: Vendor=413c ProdID=81d7 Rev=03.18 S: Manufacturer=DELL S: Product=DW5821e Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option Fixes: e7e197edd09c25 ("qmi_wwan: add support for the Dell Wireless 5821e module") Signed-off-by: Aleksander Morgado Acked-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 38502809420b..cb0cc30c3d6a 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -1246,7 +1246,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x413c, 0x81b3, 8)}, /* Dell Wireless 5809e Gobi(TM) 4G LTE Mobile Broadband Card (rev3) */ {QMI_FIXED_INTF(0x413c, 0x81b6, 8)}, /* Dell Wireless 5811e */ {QMI_FIXED_INTF(0x413c, 0x81b6, 10)}, /* Dell Wireless 5811e */ - {QMI_FIXED_INTF(0x413c, 0x81d7, 1)}, /* Dell Wireless 5821e */ + {QMI_FIXED_INTF(0x413c, 0x81d7, 0)}, /* Dell Wireless 5821e */ {QMI_FIXED_INTF(0x03f0, 0x4e1d, 8)}, /* HP lt4111 LTE/EV-DO/HSPA+ Gobi 4G Module */ {QMI_FIXED_INTF(0x03f0, 0x9d1d, 1)}, /* HP lt4120 Snapdragon X5 LTE */ {QMI_FIXED_INTF(0x22de, 0x9061, 3)}, /* WeTelecom WPD-600N */ -- cgit v1.2.3 From 03bc7cab7d7218088412a75e141696a89059ab00 Mon Sep 17 00:00:00 2001 From: Shubhrajyoti Datta Date: Tue, 24 Jul 2018 10:09:53 +0530 Subject: net: axienet: Fix double deregister of mdio If the registration fails then mdio_unregister is called. However at unbind the unregister ia attempted again resulting in the below crash [ 73.544038] kernel BUG at drivers/net/phy/mdio_bus.c:415! [ 73.549362] Internal error: Oops - BUG: 0 [#1] SMP [ 73.554127] Modules linked in: [ 73.557168] CPU: 0 PID: 2249 Comm: sh Not tainted 4.14.0 #183 [ 73.562895] Hardware name: xlnx,zynqmp (DT) [ 73.567062] task: ffffffc879e41180 task.stack: ffffff800cbe0000 [ 73.572973] PC is at mdiobus_unregister+0x84/0x88 [ 73.577656] LR is at axienet_mdio_teardown+0x18/0x30 [ 73.582601] pc : [] lr : [] pstate: 20000145 [ 73.589981] sp : ffffff800cbe3c30 [ 73.593277] x29: ffffff800cbe3c30 x28: ffffffc879e41180 [ 73.598573] x27: ffffff8008a21000 x26: 0000000000000040 [ 73.603868] x25: 0000000000000124 x24: ffffffc879efe920 [ 73.609164] x23: 0000000000000060 x22: ffffffc879e02000 [ 73.614459] x21: ffffffc879e02800 x20: ffffffc87b0b8870 [ 73.619754] x19: ffffffc879e02800 x18: 000000000000025d [ 73.625050] x17: 0000007f9a719ad0 x16: ffffff8008195bd8 [ 73.630345] x15: 0000007f9a6b3d00 x14: 0000000000000010 [ 73.635640] x13: 74656e7265687465 x12: 0000000000000030 [ 73.640935] x11: 0000000000000030 x10: 0101010101010101 [ 73.646231] x9 : 241f394f42533300 x8 : ffffffc8799f6e98 [ 73.651526] x7 : ffffffc8799f6f18 x6 : ffffffc87b0ba318 [ 73.656822] x5 : ffffffc87b0ba498 x4 : 0000000000000000 [ 73.662117] x3 : 0000000000000000 x2 : 0000000000000008 [ 73.667412] x1 : 0000000000000004 x0 : ffffffc8799f4000 [ 73.672708] Process sh (pid: 2249, stack limit = 0xffffff800cbe0000) Fix the same by making the bus NULL on unregister. Signed-off-by: Shubhrajyoti Datta Signed-off-by: David S. Miller --- drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c index 16c3bfbe1992..757a3b37ae8a 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c @@ -218,6 +218,7 @@ issue: ret = of_mdiobus_register(bus, np1); if (ret) { mdiobus_free(bus); + lp->mii_bus = NULL; return ret; } return 0; -- cgit v1.2.3 From 64bb568488671048d25d7b3ada058bb6c7cb1d5d Mon Sep 17 00:00:00 2001 From: Martin KaFai Lau Date: Tue, 24 Jul 2018 08:40:20 -0700 Subject: bpf: btf: Sync uapi btf.h to tools This patch sync the uapi btf.h to tools/ Fixes: 36fc3c8c282c bpf: btf: Clean up BTF_INT_BITS() in uapi btf.h Signed-off-by: Martin KaFai Lau Acked-by: Yonghong Song Signed-off-by: Daniel Borkmann --- tools/include/uapi/linux/btf.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/include/uapi/linux/btf.h b/tools/include/uapi/linux/btf.h index 0b5ddbe135a4..972265f32871 100644 --- a/tools/include/uapi/linux/btf.h +++ b/tools/include/uapi/linux/btf.h @@ -76,7 +76,7 @@ struct btf_type { */ #define BTF_INT_ENCODING(VAL) (((VAL) & 0x0f000000) >> 24) #define BTF_INT_OFFSET(VAL) (((VAL & 0x00ff0000)) >> 16) -#define BTF_INT_BITS(VAL) ((VAL) & 0x0000ffff) +#define BTF_INT_BITS(VAL) ((VAL) & 0x000000ff) /* Attributes stored in the BTF_INT_ENCODING */ #define BTF_INT_SIGNED (1 << 0) -- cgit v1.2.3 From 5b891af7fca14526b2a87c6f38b004e2df655ef4 Mon Sep 17 00:00:00 2001 From: Martin KaFai Lau Date: Tue, 24 Jul 2018 08:40:21 -0700 Subject: bpf: Replace [u]int32_t and [u]int64_t in libbpf This patch replaces [u]int32_t and [u]int64_t usage with __[su]32 and __[su]64. The same change goes for [u]int16_t and [u]int8_t. Fixes: 8a138aed4a80 ("bpf: btf: Add BTF support to libbpf") Signed-off-by: Martin KaFai Lau Acked-by: Yonghong Song Signed-off-by: Daniel Borkmann --- tools/lib/bpf/btf.c | 34 ++++++++++++++++------------------ tools/lib/bpf/btf.h | 8 ++++---- tools/lib/bpf/libbpf.c | 12 ++++++------ tools/lib/bpf/libbpf.h | 4 ++-- 4 files changed, 28 insertions(+), 30 deletions(-) diff --git a/tools/lib/bpf/btf.c b/tools/lib/bpf/btf.c index 8c54a4b6f187..b80de80b4584 100644 --- a/tools/lib/bpf/btf.c +++ b/tools/lib/bpf/btf.c @@ -2,7 +2,6 @@ /* Copyright (c) 2018 Facebook */ #include -#include #include #include #include @@ -27,13 +26,13 @@ struct btf { struct btf_type **types; const char *strings; void *nohdr_data; - uint32_t nr_types; - uint32_t types_size; - uint32_t data_size; + __u32 nr_types; + __u32 types_size; + __u32 data_size; int fd; }; -static const char *btf_name_by_offset(const struct btf *btf, uint32_t offset) +static const char *btf_name_by_offset(const struct btf *btf, __u32 offset) { if (offset < btf->hdr->str_len) return &btf->strings[offset]; @@ -45,7 +44,7 @@ static int btf_add_type(struct btf *btf, struct btf_type *t) { if (btf->types_size - btf->nr_types < 2) { struct btf_type **new_types; - u32 expand_by, new_size; + __u32 expand_by, new_size; if (btf->types_size == BTF_MAX_NR_TYPES) return -E2BIG; @@ -72,7 +71,7 @@ static int btf_add_type(struct btf *btf, struct btf_type *t) static int btf_parse_hdr(struct btf *btf, btf_print_fn_t err_log) { const struct btf_header *hdr = btf->hdr; - u32 meta_left; + __u32 meta_left; if (btf->data_size < sizeof(struct btf_header)) { elog("BTF header not found\n"); @@ -151,7 +150,7 @@ static int btf_parse_type_sec(struct btf *btf, btf_print_fn_t err_log) while (next_type < end_type) { struct btf_type *t = next_type; - uint16_t vlen = BTF_INFO_VLEN(t->info); + __u16 vlen = BTF_INFO_VLEN(t->info); int err; next_type += sizeof(*t); @@ -191,7 +190,7 @@ static int btf_parse_type_sec(struct btf *btf, btf_print_fn_t err_log) } static const struct btf_type *btf_type_by_id(const struct btf *btf, - uint32_t type_id) + __u32 type_id) { if (type_id > btf->nr_types) return NULL; @@ -209,7 +208,7 @@ static bool btf_type_is_void_or_null(const struct btf_type *t) return !t || btf_type_is_void(t); } -static int64_t btf_type_size(const struct btf_type *t) +static __s64 btf_type_size(const struct btf_type *t) { switch (BTF_INFO_KIND(t->info)) { case BTF_KIND_INT: @@ -226,12 +225,12 @@ static int64_t btf_type_size(const struct btf_type *t) #define MAX_RESOLVE_DEPTH 32 -int64_t btf__resolve_size(const struct btf *btf, uint32_t type_id) +__s64 btf__resolve_size(const struct btf *btf, __u32 type_id) { const struct btf_array *array; const struct btf_type *t; - uint32_t nelems = 1; - int64_t size = -1; + __u32 nelems = 1; + __s64 size = -1; int i; t = btf_type_by_id(btf, type_id); @@ -271,9 +270,9 @@ int64_t btf__resolve_size(const struct btf *btf, uint32_t type_id) return nelems * size; } -int32_t btf__find_by_name(const struct btf *btf, const char *type_name) +__s32 btf__find_by_name(const struct btf *btf, const char *type_name) { - uint32_t i; + __u32 i; if (!strcmp(type_name, "void")) return 0; @@ -302,10 +301,9 @@ void btf__free(struct btf *btf) free(btf); } -struct btf *btf__new(uint8_t *data, uint32_t size, - btf_print_fn_t err_log) +struct btf *btf__new(__u8 *data, __u32 size, btf_print_fn_t err_log) { - uint32_t log_buf_size = 0; + __u32 log_buf_size = 0; char *log_buf = NULL; struct btf *btf; int err; diff --git a/tools/lib/bpf/btf.h b/tools/lib/bpf/btf.h index 74bb344035bb..ed3a84370ccc 100644 --- a/tools/lib/bpf/btf.h +++ b/tools/lib/bpf/btf.h @@ -4,7 +4,7 @@ #ifndef __BPF_BTF_H #define __BPF_BTF_H -#include +#include #define BTF_ELF_SEC ".BTF" @@ -14,9 +14,9 @@ typedef int (*btf_print_fn_t)(const char *, ...) __attribute__((format(printf, 1, 2))); void btf__free(struct btf *btf); -struct btf *btf__new(uint8_t *data, uint32_t size, btf_print_fn_t err_log); -int32_t btf__find_by_name(const struct btf *btf, const char *type_name); -int64_t btf__resolve_size(const struct btf *btf, uint32_t type_id); +struct btf *btf__new(__u8 *data, __u32 size, btf_print_fn_t err_log); +__s32 btf__find_by_name(const struct btf *btf, const char *type_name); +__s64 btf__resolve_size(const struct btf *btf, __u32 type_id); int btf__fd(const struct btf *btf); #endif diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c index a1e96b5de5ff..6deb4fe4fffe 100644 --- a/tools/lib/bpf/libbpf.c +++ b/tools/lib/bpf/libbpf.c @@ -216,8 +216,8 @@ struct bpf_map { size_t offset; int map_ifindex; struct bpf_map_def def; - uint32_t btf_key_type_id; - uint32_t btf_value_type_id; + __u32 btf_key_type_id; + __u32 btf_value_type_id; void *priv; bpf_map_clear_priv_t clear_priv; }; @@ -1016,8 +1016,8 @@ static int bpf_map_find_btf_info(struct bpf_map *map, const struct btf *btf) { struct bpf_map_def *def = &map->def; const size_t max_name = 256; - int64_t key_size, value_size; - int32_t key_id, value_id; + __s64 key_size, value_size; + __s32 key_id, value_id; char name[max_name]; /* Find key type by name from BTF */ @@ -2089,12 +2089,12 @@ const char *bpf_map__name(struct bpf_map *map) return map ? map->name : NULL; } -uint32_t bpf_map__btf_key_type_id(const struct bpf_map *map) +__u32 bpf_map__btf_key_type_id(const struct bpf_map *map) { return map ? map->btf_key_type_id : 0; } -uint32_t bpf_map__btf_value_type_id(const struct bpf_map *map) +__u32 bpf_map__btf_value_type_id(const struct bpf_map *map) { return map ? map->btf_value_type_id : 0; } diff --git a/tools/lib/bpf/libbpf.h b/tools/lib/bpf/libbpf.h index 09976531aa74..b33ae02f7d0e 100644 --- a/tools/lib/bpf/libbpf.h +++ b/tools/lib/bpf/libbpf.h @@ -244,8 +244,8 @@ bpf_map__next(struct bpf_map *map, struct bpf_object *obj); int bpf_map__fd(struct bpf_map *map); const struct bpf_map_def *bpf_map__def(struct bpf_map *map); const char *bpf_map__name(struct bpf_map *map); -uint32_t bpf_map__btf_key_type_id(const struct bpf_map *map); -uint32_t bpf_map__btf_value_type_id(const struct bpf_map *map); +__u32 bpf_map__btf_key_type_id(const struct bpf_map *map); +__u32 bpf_map__btf_value_type_id(const struct bpf_map *map); typedef void (*bpf_map_clear_priv_t)(struct bpf_map *, void *); int bpf_map__set_priv(struct bpf_map *map, void *priv, -- cgit v1.2.3 From 38d5d3b3d5dbc0e0bb51fa6f7559d0d5a27916f6 Mon Sep 17 00:00:00 2001 From: Martin KaFai Lau Date: Tue, 24 Jul 2018 08:40:22 -0700 Subject: bpf: Introduce BPF_ANNOTATE_KV_PAIR This patch introduces BPF_ANNOTATE_KV_PAIR to signal the bpf loader about the btf key_type and value_type of a bpf map. Please refer to the changes in test_btf_haskv.c for its usage. Both iproute2 and libbpf loader will then have the same convention to find out the map's btf_key_type_id and btf_value_type_id from a map's name. Fixes: 8a138aed4a80 ("bpf: btf: Add BTF support to libbpf") Suggested-by: Daniel Borkmann Signed-off-by: Martin KaFai Lau Acked-by: Yonghong Song Signed-off-by: Daniel Borkmann --- tools/lib/bpf/btf.c | 7 ++- tools/lib/bpf/btf.h | 2 + tools/lib/bpf/libbpf.c | 75 +++++++++++++++------------- tools/testing/selftests/bpf/bpf_helpers.h | 9 ++++ tools/testing/selftests/bpf/test_btf_haskv.c | 7 +-- 5 files changed, 56 insertions(+), 44 deletions(-) diff --git a/tools/lib/bpf/btf.c b/tools/lib/bpf/btf.c index b80de80b4584..2d270c560df3 100644 --- a/tools/lib/bpf/btf.c +++ b/tools/lib/bpf/btf.c @@ -189,8 +189,7 @@ static int btf_parse_type_sec(struct btf *btf, btf_print_fn_t err_log) return 0; } -static const struct btf_type *btf_type_by_id(const struct btf *btf, - __u32 type_id) +const struct btf_type *btf__type_by_id(const struct btf *btf, __u32 type_id) { if (type_id > btf->nr_types) return NULL; @@ -233,7 +232,7 @@ __s64 btf__resolve_size(const struct btf *btf, __u32 type_id) __s64 size = -1; int i; - t = btf_type_by_id(btf, type_id); + t = btf__type_by_id(btf, type_id); for (i = 0; i < MAX_RESOLVE_DEPTH && !btf_type_is_void_or_null(t); i++) { size = btf_type_size(t); @@ -258,7 +257,7 @@ __s64 btf__resolve_size(const struct btf *btf, __u32 type_id) return -EINVAL; } - t = btf_type_by_id(btf, type_id); + t = btf__type_by_id(btf, type_id); } if (size < 0) diff --git a/tools/lib/bpf/btf.h b/tools/lib/bpf/btf.h index ed3a84370ccc..e2a09a155f84 100644 --- a/tools/lib/bpf/btf.h +++ b/tools/lib/bpf/btf.h @@ -9,6 +9,7 @@ #define BTF_ELF_SEC ".BTF" struct btf; +struct btf_type; typedef int (*btf_print_fn_t)(const char *, ...) __attribute__((format(printf, 1, 2))); @@ -16,6 +17,7 @@ typedef int (*btf_print_fn_t)(const char *, ...) void btf__free(struct btf *btf); struct btf *btf__new(__u8 *data, __u32 size, btf_print_fn_t err_log); __s32 btf__find_by_name(const struct btf *btf, const char *type_name); +const struct btf_type *btf__type_by_id(const struct btf *btf, __u32 id); __s64 btf__resolve_size(const struct btf *btf, __u32 type_id); int btf__fd(const struct btf *btf); diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c index 6deb4fe4fffe..d881d370616c 100644 --- a/tools/lib/bpf/libbpf.c +++ b/tools/lib/bpf/libbpf.c @@ -36,6 +36,7 @@ #include #include #include +#include #include #include #include @@ -1014,68 +1015,72 @@ bpf_program__collect_reloc(struct bpf_program *prog, GElf_Shdr *shdr, static int bpf_map_find_btf_info(struct bpf_map *map, const struct btf *btf) { + const struct btf_type *container_type; + const struct btf_member *key, *value; struct bpf_map_def *def = &map->def; const size_t max_name = 256; + char container_name[max_name]; __s64 key_size, value_size; - __s32 key_id, value_id; - char name[max_name]; + __s32 container_id; - /* Find key type by name from BTF */ - if (snprintf(name, max_name, "%s_key", map->name) == max_name) { - pr_warning("map:%s length of BTF key_type:%s_key is too long\n", + if (snprintf(container_name, max_name, "____btf_map_%s", map->name) == + max_name) { + pr_warning("map:%s length of '____btf_map_%s' is too long\n", map->name, map->name); return -EINVAL; } - key_id = btf__find_by_name(btf, name); - if (key_id < 0) { - pr_debug("map:%s key_type:%s cannot be found in BTF\n", - map->name, name); - return key_id; + container_id = btf__find_by_name(btf, container_name); + if (container_id < 0) { + pr_debug("map:%s container_name:%s cannot be found in BTF. Missing BPF_ANNOTATE_KV_PAIR?\n", + map->name, container_name); + return container_id; } - key_size = btf__resolve_size(btf, key_id); - if (key_size < 0) { - pr_warning("map:%s key_type:%s cannot get the BTF type_size\n", - map->name, name); - return key_size; + container_type = btf__type_by_id(btf, container_id); + if (!container_type) { + pr_warning("map:%s cannot find BTF type for container_id:%u\n", + map->name, container_id); + return -EINVAL; } - if (def->key_size != key_size) { - pr_warning("map:%s key_type:%s has BTF type_size:%u != key_size:%u\n", - map->name, name, (unsigned int)key_size, def->key_size); + if (BTF_INFO_KIND(container_type->info) != BTF_KIND_STRUCT || + BTF_INFO_VLEN(container_type->info) < 2) { + pr_warning("map:%s container_name:%s is an invalid container struct\n", + map->name, container_name); return -EINVAL; } - /* Find value type from BTF */ - if (snprintf(name, max_name, "%s_value", map->name) == max_name) { - pr_warning("map:%s length of BTF value_type:%s_value is too long\n", - map->name, map->name); - return -EINVAL; + key = (struct btf_member *)(container_type + 1); + value = key + 1; + + key_size = btf__resolve_size(btf, key->type); + if (key_size < 0) { + pr_warning("map:%s invalid BTF key_type_size\n", + map->name); + return key_size; } - value_id = btf__find_by_name(btf, name); - if (value_id < 0) { - pr_debug("map:%s value_type:%s cannot be found in BTF\n", - map->name, name); - return value_id; + if (def->key_size != key_size) { + pr_warning("map:%s btf_key_type_size:%u != map_def_key_size:%u\n", + map->name, (__u32)key_size, def->key_size); + return -EINVAL; } - value_size = btf__resolve_size(btf, value_id); + value_size = btf__resolve_size(btf, value->type); if (value_size < 0) { - pr_warning("map:%s value_type:%s cannot get the BTF type_size\n", - map->name, name); + pr_warning("map:%s invalid BTF value_type_size\n", map->name); return value_size; } if (def->value_size != value_size) { - pr_warning("map:%s value_type:%s has BTF type_size:%u != value_size:%u\n", - map->name, name, (unsigned int)value_size, def->value_size); + pr_warning("map:%s btf_value_type_size:%u != map_def_value_size:%u\n", + map->name, (__u32)value_size, def->value_size); return -EINVAL; } - map->btf_key_type_id = key_id; - map->btf_value_type_id = value_id; + map->btf_key_type_id = key->type; + map->btf_value_type_id = value->type; return 0; } diff --git a/tools/testing/selftests/bpf/bpf_helpers.h b/tools/testing/selftests/bpf/bpf_helpers.h index f2f28b6c8915..810de20e8e26 100644 --- a/tools/testing/selftests/bpf/bpf_helpers.h +++ b/tools/testing/selftests/bpf/bpf_helpers.h @@ -158,6 +158,15 @@ struct bpf_map_def { unsigned int numa_node; }; +#define BPF_ANNOTATE_KV_PAIR(name, type_key, type_val) \ + struct ____btf_map_##name { \ + type_key key; \ + type_val value; \ + }; \ + struct ____btf_map_##name \ + __attribute__ ((section(".maps." #name), used)) \ + ____btf_map_##name = { } + static int (*bpf_skb_load_bytes)(void *ctx, int off, void *to, int len) = (void *) BPF_FUNC_skb_load_bytes; static int (*bpf_skb_store_bytes)(void *ctx, int off, void *from, int len, int flags) = diff --git a/tools/testing/selftests/bpf/test_btf_haskv.c b/tools/testing/selftests/bpf/test_btf_haskv.c index 8c7ca096ecf2..b21b876f475d 100644 --- a/tools/testing/selftests/bpf/test_btf_haskv.c +++ b/tools/testing/selftests/bpf/test_btf_haskv.c @@ -10,11 +10,6 @@ struct ipv_counts { unsigned int v6; }; -typedef int btf_map_key; -typedef struct ipv_counts btf_map_value; -btf_map_key dumm_key; -btf_map_value dummy_value; - struct bpf_map_def SEC("maps") btf_map = { .type = BPF_MAP_TYPE_ARRAY, .key_size = sizeof(int), @@ -22,6 +17,8 @@ struct bpf_map_def SEC("maps") btf_map = { .max_entries = 4, }; +BPF_ANNOTATE_KV_PAIR(btf_map, int, struct ipv_counts); + struct dummy_tracepoint_args { unsigned long long pad; struct sock *sock; -- cgit v1.2.3 From 0a5257bc6d89c2ae69b9bf955679cb4f89261874 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Tue, 17 Jul 2018 13:43:56 +0300 Subject: iwlwifi: add more card IDs for 9000 series Add new device IDs for the 9000 series. Cc: stable@vger.kernel.org # 4.14 Signed-off-by: Emmanuel Grumbach Signed-off-by: Kalle Valo --- drivers/net/wireless/intel/iwlwifi/cfg/9000.c | 69 +++++++++++++++++++++++++ drivers/net/wireless/intel/iwlwifi/iwl-config.h | 5 ++ drivers/net/wireless/intel/iwlwifi/pcie/drv.c | 22 ++++++++ 3 files changed, 96 insertions(+) diff --git a/drivers/net/wireless/intel/iwlwifi/cfg/9000.c b/drivers/net/wireless/intel/iwlwifi/cfg/9000.c index e20c30b29c03..c8ea63d02619 100644 --- a/drivers/net/wireless/intel/iwlwifi/cfg/9000.c +++ b/drivers/net/wireless/intel/iwlwifi/cfg/9000.c @@ -178,6 +178,17 @@ const struct iwl_cfg iwl9260_2ac_cfg = { .max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K, }; +const struct iwl_cfg iwl9260_killer_2ac_cfg = { + .name = "Killer (R) Wireless-AC 1550 Wireless Network Adapter (9260NGW)", + .fw_name_pre = IWL9260A_FW_PRE, + .fw_name_pre_b_or_c_step = IWL9260B_FW_PRE, + IWL_DEVICE_9000, + .ht_params = &iwl9000_ht_params, + .nvm_ver = IWL9000_NVM_VERSION, + .nvm_calib_ver = IWL9000_TX_POWER_VERSION, + .max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K, +}; + const struct iwl_cfg iwl9270_2ac_cfg = { .name = "Intel(R) Dual Band Wireless AC 9270", .fw_name_pre = IWL9260A_FW_PRE, @@ -267,6 +278,34 @@ const struct iwl_cfg iwl9560_2ac_cfg_soc = { .soc_latency = 5000, }; +const struct iwl_cfg iwl9560_killer_2ac_cfg_soc = { + .name = "Killer (R) Wireless-AC 1550i Wireless Network Adapter (9560NGW)", + .fw_name_pre = IWL9000A_FW_PRE, + .fw_name_pre_b_or_c_step = IWL9000B_FW_PRE, + .fw_name_pre_rf_next_step = IWL9000RFB_FW_PRE, + IWL_DEVICE_9000, + .ht_params = &iwl9000_ht_params, + .nvm_ver = IWL9000_NVM_VERSION, + .nvm_calib_ver = IWL9000_TX_POWER_VERSION, + .max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K, + .integrated = true, + .soc_latency = 5000, +}; + +const struct iwl_cfg iwl9560_killer_s_2ac_cfg_soc = { + .name = "Killer (R) Wireless-AC 1550s Wireless Network Adapter (9560NGW)", + .fw_name_pre = IWL9000A_FW_PRE, + .fw_name_pre_b_or_c_step = IWL9000B_FW_PRE, + .fw_name_pre_rf_next_step = IWL9000RFB_FW_PRE, + IWL_DEVICE_9000, + .ht_params = &iwl9000_ht_params, + .nvm_ver = IWL9000_NVM_VERSION, + .nvm_calib_ver = IWL9000_TX_POWER_VERSION, + .max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K, + .integrated = true, + .soc_latency = 5000, +}; + const struct iwl_cfg iwl9460_2ac_cfg_shared_clk = { .name = "Intel(R) Dual Band Wireless AC 9460", .fw_name_pre = IWL9000A_FW_PRE, @@ -327,6 +366,36 @@ const struct iwl_cfg iwl9560_2ac_cfg_shared_clk = { .extra_phy_cfg_flags = FW_PHY_CFG_SHARED_CLK }; +const struct iwl_cfg iwl9560_killer_2ac_cfg_shared_clk = { + .name = "Killer (R) Wireless-AC 1550i Wireless Network Adapter (9560NGW)", + .fw_name_pre = IWL9000A_FW_PRE, + .fw_name_pre_b_or_c_step = IWL9000B_FW_PRE, + .fw_name_pre_rf_next_step = IWL9000RFB_FW_PRE, + IWL_DEVICE_9000, + .ht_params = &iwl9000_ht_params, + .nvm_ver = IWL9000_NVM_VERSION, + .nvm_calib_ver = IWL9000_TX_POWER_VERSION, + .max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K, + .integrated = true, + .soc_latency = 5000, + .extra_phy_cfg_flags = FW_PHY_CFG_SHARED_CLK +}; + +const struct iwl_cfg iwl9560_killer_s_2ac_cfg_shared_clk = { + .name = "Killer (R) Wireless-AC 1550s Wireless Network Adapter (9560NGW)", + .fw_name_pre = IWL9000A_FW_PRE, + .fw_name_pre_b_or_c_step = IWL9000B_FW_PRE, + .fw_name_pre_rf_next_step = IWL9000RFB_FW_PRE, + IWL_DEVICE_9000, + .ht_params = &iwl9000_ht_params, + .nvm_ver = IWL9000_NVM_VERSION, + .nvm_calib_ver = IWL9000_TX_POWER_VERSION, + .max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K, + .integrated = true, + .soc_latency = 5000, + .extra_phy_cfg_flags = FW_PHY_CFG_SHARED_CLK +}; + MODULE_FIRMWARE(IWL9000A_MODULE_FIRMWARE(IWL9000_UCODE_API_MAX)); MODULE_FIRMWARE(IWL9000B_MODULE_FIRMWARE(IWL9000_UCODE_API_MAX)); MODULE_FIRMWARE(IWL9000RFB_MODULE_FIRMWARE(IWL9000_UCODE_API_MAX)); diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-config.h b/drivers/net/wireless/intel/iwlwifi/iwl-config.h index c503b26793f6..84a816809723 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-config.h +++ b/drivers/net/wireless/intel/iwlwifi/iwl-config.h @@ -551,6 +551,7 @@ extern const struct iwl_cfg iwl8275_2ac_cfg; extern const struct iwl_cfg iwl4165_2ac_cfg; extern const struct iwl_cfg iwl9160_2ac_cfg; extern const struct iwl_cfg iwl9260_2ac_cfg; +extern const struct iwl_cfg iwl9260_killer_2ac_cfg; extern const struct iwl_cfg iwl9270_2ac_cfg; extern const struct iwl_cfg iwl9460_2ac_cfg; extern const struct iwl_cfg iwl9560_2ac_cfg; @@ -558,10 +559,14 @@ extern const struct iwl_cfg iwl9460_2ac_cfg_soc; extern const struct iwl_cfg iwl9461_2ac_cfg_soc; extern const struct iwl_cfg iwl9462_2ac_cfg_soc; extern const struct iwl_cfg iwl9560_2ac_cfg_soc; +extern const struct iwl_cfg iwl9560_killer_2ac_cfg_soc; +extern const struct iwl_cfg iwl9560_killer_s_2ac_cfg_soc; extern const struct iwl_cfg iwl9460_2ac_cfg_shared_clk; extern const struct iwl_cfg iwl9461_2ac_cfg_shared_clk; extern const struct iwl_cfg iwl9462_2ac_cfg_shared_clk; extern const struct iwl_cfg iwl9560_2ac_cfg_shared_clk; +extern const struct iwl_cfg iwl9560_killer_2ac_cfg_shared_clk; +extern const struct iwl_cfg iwl9560_killer_s_2ac_cfg_shared_clk; extern const struct iwl_cfg iwl22000_2ac_cfg_hr; extern const struct iwl_cfg iwl22000_2ac_cfg_hr_cdb; extern const struct iwl_cfg iwl22000_2ac_cfg_jf; diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c index 38234bda9017..8520523b91b4 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c @@ -545,6 +545,9 @@ static const struct pci_device_id iwl_hw_card_ids[] = { {IWL_PCI_DEVICE(0x2526, 0x1210, iwl9260_2ac_cfg)}, {IWL_PCI_DEVICE(0x2526, 0x1410, iwl9270_2ac_cfg)}, {IWL_PCI_DEVICE(0x2526, 0x1420, iwl9460_2ac_cfg_soc)}, + {IWL_PCI_DEVICE(0x2526, 0x1550, iwl9260_killer_2ac_cfg)}, + {IWL_PCI_DEVICE(0x2526, 0x1551, iwl9560_killer_s_2ac_cfg_soc)}, + {IWL_PCI_DEVICE(0x2526, 0x1552, iwl9560_killer_2ac_cfg_soc)}, {IWL_PCI_DEVICE(0x2526, 0x1610, iwl9270_2ac_cfg)}, {IWL_PCI_DEVICE(0x2526, 0x2030, iwl9560_2ac_cfg_soc)}, {IWL_PCI_DEVICE(0x2526, 0x2034, iwl9560_2ac_cfg_soc)}, @@ -554,6 +557,7 @@ static const struct pci_device_id iwl_hw_card_ids[] = { {IWL_PCI_DEVICE(0x2526, 0x40A4, iwl9460_2ac_cfg)}, {IWL_PCI_DEVICE(0x2526, 0x4234, iwl9560_2ac_cfg_soc)}, {IWL_PCI_DEVICE(0x2526, 0x42A4, iwl9462_2ac_cfg_soc)}, + {IWL_PCI_DEVICE(0x2526, 0x8014, iwl9260_2ac_cfg)}, {IWL_PCI_DEVICE(0x2526, 0xA014, iwl9260_2ac_cfg)}, {IWL_PCI_DEVICE(0x271B, 0x0010, iwl9160_2ac_cfg)}, {IWL_PCI_DEVICE(0x271B, 0x0014, iwl9160_2ac_cfg)}, @@ -578,6 +582,8 @@ static const struct pci_device_id iwl_hw_card_ids[] = { {IWL_PCI_DEVICE(0x2720, 0x1010, iwl9260_2ac_cfg)}, {IWL_PCI_DEVICE(0x2720, 0x1030, iwl9560_2ac_cfg_soc)}, {IWL_PCI_DEVICE(0x2720, 0x1210, iwl9260_2ac_cfg)}, + {IWL_PCI_DEVICE(0x2720, 0x1551, iwl9560_killer_s_2ac_cfg_soc)}, + {IWL_PCI_DEVICE(0x2720, 0x1552, iwl9560_killer_2ac_cfg_soc)}, {IWL_PCI_DEVICE(0x2720, 0x2030, iwl9560_2ac_cfg_soc)}, {IWL_PCI_DEVICE(0x2720, 0x2034, iwl9560_2ac_cfg_soc)}, {IWL_PCI_DEVICE(0x2720, 0x4030, iwl9560_2ac_cfg)}, @@ -604,6 +610,8 @@ static const struct pci_device_id iwl_hw_card_ids[] = { {IWL_PCI_DEVICE(0x30DC, 0x1010, iwl9260_2ac_cfg)}, {IWL_PCI_DEVICE(0x30DC, 0x1030, iwl9560_2ac_cfg_soc)}, {IWL_PCI_DEVICE(0x30DC, 0x1210, iwl9260_2ac_cfg)}, + {IWL_PCI_DEVICE(0x30DC, 0x1551, iwl9560_killer_s_2ac_cfg_soc)}, + {IWL_PCI_DEVICE(0x30DC, 0x1552, iwl9560_killer_2ac_cfg_soc)}, {IWL_PCI_DEVICE(0x30DC, 0x2030, iwl9560_2ac_cfg_soc)}, {IWL_PCI_DEVICE(0x30DC, 0x2034, iwl9560_2ac_cfg_soc)}, {IWL_PCI_DEVICE(0x30DC, 0x4030, iwl9560_2ac_cfg_soc)}, @@ -630,6 +638,8 @@ static const struct pci_device_id iwl_hw_card_ids[] = { {IWL_PCI_DEVICE(0x31DC, 0x1010, iwl9260_2ac_cfg)}, {IWL_PCI_DEVICE(0x31DC, 0x1030, iwl9560_2ac_cfg_shared_clk)}, {IWL_PCI_DEVICE(0x31DC, 0x1210, iwl9260_2ac_cfg)}, + {IWL_PCI_DEVICE(0x31DC, 0x1551, iwl9560_killer_s_2ac_cfg_shared_clk)}, + {IWL_PCI_DEVICE(0x31DC, 0x1552, iwl9560_killer_2ac_cfg_shared_clk)}, {IWL_PCI_DEVICE(0x31DC, 0x2030, iwl9560_2ac_cfg_shared_clk)}, {IWL_PCI_DEVICE(0x31DC, 0x2034, iwl9560_2ac_cfg_shared_clk)}, {IWL_PCI_DEVICE(0x31DC, 0x4030, iwl9560_2ac_cfg_shared_clk)}, @@ -656,6 +666,8 @@ static const struct pci_device_id iwl_hw_card_ids[] = { {IWL_PCI_DEVICE(0x34F0, 0x1010, iwl9260_2ac_cfg)}, {IWL_PCI_DEVICE(0x34F0, 0x1030, iwl9560_2ac_cfg_soc)}, {IWL_PCI_DEVICE(0x34F0, 0x1210, iwl9260_2ac_cfg)}, + {IWL_PCI_DEVICE(0x34F0, 0x1551, iwl9560_killer_s_2ac_cfg_soc)}, + {IWL_PCI_DEVICE(0x34F0, 0x1552, iwl9560_killer_2ac_cfg_soc)}, {IWL_PCI_DEVICE(0x34F0, 0x2030, iwl9560_2ac_cfg_soc)}, {IWL_PCI_DEVICE(0x34F0, 0x2034, iwl9560_2ac_cfg_soc)}, {IWL_PCI_DEVICE(0x34F0, 0x4030, iwl9560_2ac_cfg_soc)}, @@ -682,6 +694,8 @@ static const struct pci_device_id iwl_hw_card_ids[] = { {IWL_PCI_DEVICE(0x3DF0, 0x1010, iwl9260_2ac_cfg)}, {IWL_PCI_DEVICE(0x3DF0, 0x1030, iwl9560_2ac_cfg_soc)}, {IWL_PCI_DEVICE(0x3DF0, 0x1210, iwl9260_2ac_cfg)}, + {IWL_PCI_DEVICE(0x3DF0, 0x1551, iwl9560_killer_s_2ac_cfg_soc)}, + {IWL_PCI_DEVICE(0x3DF0, 0x1552, iwl9560_killer_2ac_cfg_soc)}, {IWL_PCI_DEVICE(0x3DF0, 0x2030, iwl9560_2ac_cfg_soc)}, {IWL_PCI_DEVICE(0x3DF0, 0x2034, iwl9560_2ac_cfg_soc)}, {IWL_PCI_DEVICE(0x3DF0, 0x4030, iwl9560_2ac_cfg_soc)}, @@ -708,6 +722,8 @@ static const struct pci_device_id iwl_hw_card_ids[] = { {IWL_PCI_DEVICE(0x43F0, 0x1010, iwl9260_2ac_cfg)}, {IWL_PCI_DEVICE(0x43F0, 0x1030, iwl9560_2ac_cfg_soc)}, {IWL_PCI_DEVICE(0x43F0, 0x1210, iwl9260_2ac_cfg)}, + {IWL_PCI_DEVICE(0x43F0, 0x1551, iwl9560_killer_s_2ac_cfg_soc)}, + {IWL_PCI_DEVICE(0x43F0, 0x1552, iwl9560_killer_2ac_cfg_soc)}, {IWL_PCI_DEVICE(0x43F0, 0x2030, iwl9560_2ac_cfg_soc)}, {IWL_PCI_DEVICE(0x43F0, 0x2034, iwl9560_2ac_cfg_soc)}, {IWL_PCI_DEVICE(0x43F0, 0x4030, iwl9560_2ac_cfg_soc)}, @@ -743,6 +759,8 @@ static const struct pci_device_id iwl_hw_card_ids[] = { {IWL_PCI_DEVICE(0x9DF0, 0x1010, iwl9260_2ac_cfg)}, {IWL_PCI_DEVICE(0x9DF0, 0x1030, iwl9560_2ac_cfg_soc)}, {IWL_PCI_DEVICE(0x9DF0, 0x1210, iwl9260_2ac_cfg)}, + {IWL_PCI_DEVICE(0x9DF0, 0x1551, iwl9560_killer_s_2ac_cfg_soc)}, + {IWL_PCI_DEVICE(0x9DF0, 0x1552, iwl9560_killer_2ac_cfg_soc)}, {IWL_PCI_DEVICE(0x9DF0, 0x2010, iwl9460_2ac_cfg_soc)}, {IWL_PCI_DEVICE(0x9DF0, 0x2030, iwl9560_2ac_cfg_soc)}, {IWL_PCI_DEVICE(0x9DF0, 0x2034, iwl9560_2ac_cfg_soc)}, @@ -771,6 +789,8 @@ static const struct pci_device_id iwl_hw_card_ids[] = { {IWL_PCI_DEVICE(0xA0F0, 0x1010, iwl9260_2ac_cfg)}, {IWL_PCI_DEVICE(0xA0F0, 0x1030, iwl9560_2ac_cfg_soc)}, {IWL_PCI_DEVICE(0xA0F0, 0x1210, iwl9260_2ac_cfg)}, + {IWL_PCI_DEVICE(0xA0F0, 0x1551, iwl9560_killer_s_2ac_cfg_soc)}, + {IWL_PCI_DEVICE(0xA0F0, 0x1552, iwl9560_killer_2ac_cfg_soc)}, {IWL_PCI_DEVICE(0xA0F0, 0x2030, iwl9560_2ac_cfg_soc)}, {IWL_PCI_DEVICE(0xA0F0, 0x2034, iwl9560_2ac_cfg_soc)}, {IWL_PCI_DEVICE(0xA0F0, 0x4030, iwl9560_2ac_cfg_soc)}, @@ -797,6 +817,8 @@ static const struct pci_device_id iwl_hw_card_ids[] = { {IWL_PCI_DEVICE(0xA370, 0x1010, iwl9260_2ac_cfg)}, {IWL_PCI_DEVICE(0xA370, 0x1030, iwl9560_2ac_cfg_soc)}, {IWL_PCI_DEVICE(0xA370, 0x1210, iwl9260_2ac_cfg)}, + {IWL_PCI_DEVICE(0xA370, 0x1551, iwl9560_killer_s_2ac_cfg_soc)}, + {IWL_PCI_DEVICE(0xA370, 0x1552, iwl9560_killer_2ac_cfg_soc)}, {IWL_PCI_DEVICE(0xA370, 0x2030, iwl9560_2ac_cfg_soc)}, {IWL_PCI_DEVICE(0xA370, 0x2034, iwl9560_2ac_cfg_soc)}, {IWL_PCI_DEVICE(0xA370, 0x4030, iwl9560_2ac_cfg_soc)}, -- cgit v1.2.3 From 299b6365a3b7cf7f5ea1c945a420e9ee4841d6f7 Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Sun, 22 Jul 2018 23:46:25 +0200 Subject: brcmfmac: fix regression in parsing NVRAM for multiple devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit NVRAM is designed to work with Broadcom's SDK Linux kernel which fakes PCI domain 0 for all internal MMIO devices. Since official Linux kernel uses platform devices for that purpose there is a mismatch in numbering PCI domains. There used to be a fix for that problem but it was accidentally dropped during the last firmware loading rework. That resulted in brcmfmac not being able to extract device specific NVRAM content and all kind of calibration problems. Reported-by: Aditya Xavier Fixes: 2baa3aaee27f ("brcmfmac: introduce brcmf_fw_alloc_request() function") Cc: stable@vger.kernel.org # v4.17+ Signed-off-by: Rafał Miłecki Acked-by: Arend van Spriel Signed-off-by: Kalle Valo --- drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c index 45928b5b8d97..4fffa6988087 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c @@ -1785,7 +1785,8 @@ brcmf_pcie_prepare_fw_request(struct brcmf_pciedev_info *devinfo) fwreq->items[BRCMF_PCIE_FW_CODE].type = BRCMF_FW_TYPE_BINARY; fwreq->items[BRCMF_PCIE_FW_NVRAM].type = BRCMF_FW_TYPE_NVRAM; fwreq->items[BRCMF_PCIE_FW_NVRAM].flags = BRCMF_FW_REQF_OPTIONAL; - fwreq->domain_nr = pci_domain_nr(devinfo->pdev->bus); + /* NVRAM reserves PCI domain 0 for Broadcom's SDK faked bus */ + fwreq->domain_nr = pci_domain_nr(devinfo->pdev->bus) + 1; fwreq->bus_nr = devinfo->pdev->bus->number; return fwreq; -- cgit v1.2.3 From 62cedf3e60af03e47849fe2bd6a03ec179422a8a Mon Sep 17 00:00:00 2001 From: Peter Rosin Date: Fri, 20 Jul 2018 10:39:13 +0200 Subject: locking/rtmutex: Allow specifying a subclass for nested locking Needed for annotating rt_mutex locks. Tested-by: John Sperbeck Signed-off-by: Peter Rosin Signed-off-by: Peter Zijlstra (Intel) Cc: Davidlohr Bueso Cc: Deepa Dinamani Cc: Greg Kroah-Hartman Cc: Linus Torvalds Cc: Peter Chang Cc: Peter Zijlstra Cc: Philippe Ombredanne Cc: Thomas Gleixner Cc: Will Deacon Cc: Wolfram Sang Link: http://lkml.kernel.org/r/20180720083914.1950-2-peda@axentia.se Signed-off-by: Ingo Molnar --- include/linux/rtmutex.h | 7 +++++++ kernel/locking/rtmutex.c | 29 +++++++++++++++++++++++++---- 2 files changed, 32 insertions(+), 4 deletions(-) diff --git a/include/linux/rtmutex.h b/include/linux/rtmutex.h index 1b92a28dd672..6fd615a0eea9 100644 --- a/include/linux/rtmutex.h +++ b/include/linux/rtmutex.h @@ -106,7 +106,14 @@ static inline int rt_mutex_is_locked(struct rt_mutex *lock) extern void __rt_mutex_init(struct rt_mutex *lock, const char *name, struct lock_class_key *key); extern void rt_mutex_destroy(struct rt_mutex *lock); +#ifdef CONFIG_DEBUG_LOCK_ALLOC +extern void rt_mutex_lock_nested(struct rt_mutex *lock, unsigned int subclass); +#define rt_mutex_lock(lock) rt_mutex_lock_nested(lock, 0) +#else extern void rt_mutex_lock(struct rt_mutex *lock); +#define rt_mutex_lock_nested(lock, subclass) rt_mutex_lock(lock) +#endif + extern int rt_mutex_lock_interruptible(struct rt_mutex *lock); extern int rt_mutex_timed_lock(struct rt_mutex *lock, struct hrtimer_sleeper *timeout); diff --git a/kernel/locking/rtmutex.c b/kernel/locking/rtmutex.c index 4f014be7a4b8..2823d4163a37 100644 --- a/kernel/locking/rtmutex.c +++ b/kernel/locking/rtmutex.c @@ -1465,6 +1465,29 @@ rt_mutex_fastunlock(struct rt_mutex *lock, rt_mutex_postunlock(&wake_q); } +static inline void __rt_mutex_lock(struct rt_mutex *lock, unsigned int subclass) +{ + might_sleep(); + + mutex_acquire(&lock->dep_map, subclass, 0, _RET_IP_); + rt_mutex_fastlock(lock, TASK_UNINTERRUPTIBLE, rt_mutex_slowlock); +} + +#ifdef CONFIG_DEBUG_LOCK_ALLOC +/** + * rt_mutex_lock_nested - lock a rt_mutex + * + * @lock: the rt_mutex to be locked + * @subclass: the lockdep subclass + */ +void __sched rt_mutex_lock_nested(struct rt_mutex *lock, unsigned int subclass) +{ + __rt_mutex_lock(lock, subclass); +} +EXPORT_SYMBOL_GPL(rt_mutex_lock_nested); +#endif + +#ifndef CONFIG_DEBUG_LOCK_ALLOC /** * rt_mutex_lock - lock a rt_mutex * @@ -1472,12 +1495,10 @@ rt_mutex_fastunlock(struct rt_mutex *lock, */ void __sched rt_mutex_lock(struct rt_mutex *lock) { - might_sleep(); - - mutex_acquire(&lock->dep_map, 0, 0, _RET_IP_); - rt_mutex_fastlock(lock, TASK_UNINTERRUPTIBLE, rt_mutex_slowlock); + __rt_mutex_lock(lock, 0); } EXPORT_SYMBOL_GPL(rt_mutex_lock); +#endif /** * rt_mutex_lock_interruptible - lock a rt_mutex interruptible -- cgit v1.2.3 From 7b94ea50514d1a0dc94f02723b603c27bc0ea597 Mon Sep 17 00:00:00 2001 From: Peter Rosin Date: Fri, 20 Jul 2018 10:39:14 +0200 Subject: i2c/mux, locking/core: Annotate the nested rt_mutex usage If an i2c topology has instances of nested muxes, then a lockdep splat is produced when when i2c_parent_lock_bus() is called. Here is an example: ============================================ WARNING: possible recursive locking detected -------------------------------------------- insmod/68159 is trying to acquire lock: (i2c_register_adapter#2){+.+.}, at: i2c_parent_lock_bus+0x32/0x50 [i2c_mux] but task is already holding lock: (i2c_register_adapter#2){+.+.}, at: i2c_parent_lock_bus+0x32/0x50 [i2c_mux] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(i2c_register_adapter#2); lock(i2c_register_adapter#2); *** DEADLOCK *** May be due to missing lock nesting notation 1 lock held by insmod/68159: #0: (i2c_register_adapter#2){+.+.}, at: i2c_parent_lock_bus+0x32/0x50 [i2c_mux] stack backtrace: CPU: 13 PID: 68159 Comm: insmod Tainted: G O Call Trace: dump_stack+0x67/0x98 __lock_acquire+0x162e/0x1780 lock_acquire+0xba/0x200 rt_mutex_lock+0x44/0x60 i2c_parent_lock_bus+0x32/0x50 [i2c_mux] i2c_parent_lock_bus+0x3e/0x50 [i2c_mux] i2c_smbus_xfer+0xf0/0x700 i2c_smbus_read_byte+0x42/0x70 my2c_init+0xa2/0x1000 [my2c] do_one_initcall+0x51/0x192 do_init_module+0x62/0x216 load_module+0x20f9/0x2b50 SYSC_init_module+0x19a/0x1c0 SyS_init_module+0xe/0x10 do_syscall_64+0x6c/0x1a0 entry_SYSCALL_64_after_hwframe+0x42/0xb7 Reported-by: John Sperbeck Tested-by: John Sperbeck Signed-off-by: Peter Rosin Signed-off-by: Peter Zijlstra (Intel) Cc: Davidlohr Bueso Cc: Deepa Dinamani Cc: Greg Kroah-Hartman Cc: Linus Torvalds Cc: Peter Chang Cc: Peter Zijlstra Cc: Philippe Ombredanne Cc: Thomas Gleixner Cc: Will Deacon Cc: Wolfram Sang Link: http://lkml.kernel.org/r/20180720083914.1950-3-peda@axentia.se Signed-off-by: Ingo Molnar --- drivers/i2c/i2c-core-base.c | 2 +- drivers/i2c/i2c-mux.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c index 301285c54603..15c95aaa484c 100644 --- a/drivers/i2c/i2c-core-base.c +++ b/drivers/i2c/i2c-core-base.c @@ -624,7 +624,7 @@ static int i2c_check_addr_busy(struct i2c_adapter *adapter, int addr) static void i2c_adapter_lock_bus(struct i2c_adapter *adapter, unsigned int flags) { - rt_mutex_lock(&adapter->bus_lock); + rt_mutex_lock_nested(&adapter->bus_lock, i2c_adapter_depth(adapter)); } /** diff --git a/drivers/i2c/i2c-mux.c b/drivers/i2c/i2c-mux.c index 300ab4b672e4..29646aa6132e 100644 --- a/drivers/i2c/i2c-mux.c +++ b/drivers/i2c/i2c-mux.c @@ -144,7 +144,7 @@ static void i2c_mux_lock_bus(struct i2c_adapter *adapter, unsigned int flags) struct i2c_mux_priv *priv = adapter->algo_data; struct i2c_adapter *parent = priv->muxc->parent; - rt_mutex_lock(&parent->mux_lock); + rt_mutex_lock_nested(&parent->mux_lock, i2c_adapter_depth(adapter)); if (!(flags & I2C_LOCK_ROOT_ADAPTER)) return; i2c_lock_bus(parent, flags); @@ -181,7 +181,7 @@ static void i2c_parent_lock_bus(struct i2c_adapter *adapter, struct i2c_mux_priv *priv = adapter->algo_data; struct i2c_adapter *parent = priv->muxc->parent; - rt_mutex_lock(&parent->mux_lock); + rt_mutex_lock_nested(&parent->mux_lock, i2c_adapter_depth(adapter)); i2c_lock_bus(parent, flags); } -- cgit v1.2.3 From c0dc373a780f4ec63e45a573b9551763abd8cd1a Mon Sep 17 00:00:00 2001 From: Waiman Long Date: Tue, 17 Jul 2018 16:16:00 -0400 Subject: locking/pvqspinlock/x86: Use LOCK_PREFIX in __pv_queued_spin_unlock() assembly code The LOCK_PREFIX macro should be used in the __raw_callee_save___pv_queued_spin_unlock() assembly code, so that the lock prefix can be patched out on UP systems. Signed-off-by: Waiman Long Signed-off-by: Peter Zijlstra (Intel) Cc: Joe Mario Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Will Deacon Link: http://lkml.kernel.org/r/1531858560-21547-1-git-send-email-longman@redhat.com Signed-off-by: Ingo Molnar --- arch/x86/include/asm/qspinlock_paravirt.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/include/asm/qspinlock_paravirt.h b/arch/x86/include/asm/qspinlock_paravirt.h index 9ef5ee03d2d7..159622ee0674 100644 --- a/arch/x86/include/asm/qspinlock_paravirt.h +++ b/arch/x86/include/asm/qspinlock_paravirt.h @@ -43,7 +43,7 @@ asm (".pushsection .text;" "push %rdx;" "mov $0x1,%eax;" "xor %edx,%edx;" - "lock cmpxchg %dl,(%rdi);" + LOCK_PREFIX "cmpxchg %dl,(%rdi);" "cmp $0x1,%al;" "jne .slowpath;" "pop %rdx;" -- cgit v1.2.3 From 6cd0c583b04b2bd9415e07b51b63ab799949dd66 Mon Sep 17 00:00:00 2001 From: Yi Wang Date: Mon, 23 Jul 2018 12:19:07 +0800 Subject: sched/topology: Check variable group before dereferencing it The 'group' variable in sched_domain_debug_one() is not checked when firstly used in cpumask_test_cpu(cpu, sched_group_span(group)), but it might be NULL (it is checked later in the following while loop) and may cause NULL pointer dereference. We need to check it before using to avoid NULL dereference. Signed-off-by: Yi Wang Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Jiang Biao Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: zhong.weidong@zte.com.cn Link: http://lkml.kernel.org/r/1532319547-33335-1-git-send-email-wang.yi59@zte.com.cn Signed-off-by: Ingo Molnar --- kernel/sched/topology.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/sched/topology.c b/kernel/sched/topology.c index 05a831427bc7..56a0fed30c0a 100644 --- a/kernel/sched/topology.c +++ b/kernel/sched/topology.c @@ -47,7 +47,7 @@ static int sched_domain_debug_one(struct sched_domain *sd, int cpu, int level, if (!cpumask_test_cpu(cpu, sched_domain_span(sd))) { printk(KERN_ERR "ERROR: domain->span does not contain CPU%d\n", cpu); } - if (!cpumask_test_cpu(cpu, sched_group_span(group))) { + if (group && !cpumask_test_cpu(cpu, sched_group_span(group))) { printk(KERN_ERR "ERROR: domain->groups does not contain CPU%d\n", cpu); } -- cgit v1.2.3 From 2610e88946632afb78aa58e61f11368ac4c0af7b Mon Sep 17 00:00:00 2001 From: "Isaac J. Manjarres" Date: Tue, 17 Jul 2018 12:35:29 -0700 Subject: stop_machine: Disable preemption after queueing stopper threads This commit: 9fb8d5dc4b64 ("stop_machine, Disable preemption when waking two stopper threads") does not fully address the race condition that can occur as follows: On one CPU, call it CPU 3, thread 1 invokes cpu_stop_queue_two_works(2, 3,...), and the execution is such that thread 1 queues the works for migration/2 and migration/3, and is preempted after releasing the locks for migration/2 and migration/3, but before waking the threads. Then, On CPU 2, a kworker, call it thread 2, is running, and it invokes cpu_stop_queue_two_works(1, 2,...), such that thread 2 queues the works for migration/1 and migration/2. Meanwhile, on CPU 3, thread 1 resumes execution, and wakes migration/2 and migration/3. This means that when CPU 2 releases the locks for migration/1 and migration/2, but before it wakes those threads, it can be preempted by migration/2. If thread 2 is preempted by migration/2, then migration/2 will execute the first work item successfully, since migration/3 was woken up by CPU 3, but when it goes to execute the second work item, it disables preemption, calls multi_cpu_stop(), and thus, CPU 2 will wait forever for migration/1, which should have been woken up by thread 2. However migration/1 cannot be woken up by thread 2, since it is a kworker, so it is affine to CPU 2, but CPU 2 is running migration/2 with preemption disabled, so thread 2 will never run. Disable preemption after queueing works for stopper threads to ensure that the operation of queueing the works and waking the stopper threads is atomic. Co-Developed-by: Prasad Sodagudi Co-Developed-by: Pavankumar Kondeti Signed-off-by: Isaac J. Manjarres Signed-off-by: Prasad Sodagudi Signed-off-by: Pavankumar Kondeti Signed-off-by: Peter Zijlstra (Intel) Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: bigeasy@linutronix.de Cc: gregkh@linuxfoundation.org Cc: matt@codeblueprint.co.uk Fixes: 9fb8d5dc4b64 ("stop_machine, Disable preemption when waking two stopper threads") Link: http://lkml.kernel.org/r/1531856129-9871-1-git-send-email-isaacm@codeaurora.org Signed-off-by: Ingo Molnar --- kernel/stop_machine.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/kernel/stop_machine.c b/kernel/stop_machine.c index 1ff523dae6e2..e190d1ef3a23 100644 --- a/kernel/stop_machine.c +++ b/kernel/stop_machine.c @@ -260,6 +260,15 @@ retry: err = 0; __cpu_stop_queue_work(stopper1, work1, &wakeq); __cpu_stop_queue_work(stopper2, work2, &wakeq); + /* + * The waking up of stopper threads has to happen + * in the same scheduling context as the queueing. + * Otherwise, there is a possibility of one of the + * above stoppers being woken up by another CPU, + * and preempting us. This will cause us to n ot + * wake up the other stopper forever. + */ + preempt_disable(); unlock: raw_spin_unlock(&stopper2->lock); raw_spin_unlock_irq(&stopper1->lock); @@ -271,7 +280,6 @@ unlock: } if (!err) { - preempt_disable(); wake_up_q(&wakeq); preempt_enable(); } -- cgit v1.2.3 From 840d719604b0925ca23dde95f1767e4528668369 Mon Sep 17 00:00:00 2001 From: Daniel Bristot de Oliveira Date: Fri, 20 Jul 2018 11:16:30 +0200 Subject: sched/deadline: Update rq_clock of later_rq when pushing a task Daniel Casini got this warn while running a DL task here at RetisLab: [ 461.137582] ------------[ cut here ]------------ [ 461.137583] rq->clock_update_flags < RQCF_ACT_SKIP [ 461.137599] WARNING: CPU: 4 PID: 2354 at kernel/sched/sched.h:967 assert_clock_updated.isra.32.part.33+0x17/0x20 [a ton of modules] [ 461.137646] CPU: 4 PID: 2354 Comm: label_image Not tainted 4.18.0-rc4+ #3 [ 461.137647] Hardware name: ASUS All Series/Z87-K, BIOS 0801 09/02/2013 [ 461.137649] RIP: 0010:assert_clock_updated.isra.32.part.33+0x17/0x20 [ 461.137649] Code: ff 48 89 83 08 09 00 00 eb c6 66 0f 1f 84 00 00 00 00 00 55 48 c7 c7 98 7a 6c a5 c6 05 bc 0d 54 01 01 48 89 e5 e8 a9 84 fb ff <0f> 0b 5d c3 0f 1f 44 00 00 0f 1f 44 00 00 83 7e 60 01 74 0a 48 3b [ 461.137673] RSP: 0018:ffffa77e08cafc68 EFLAGS: 00010082 [ 461.137674] RAX: 0000000000000000 RBX: ffff8b3fc1702d80 RCX: 0000000000000006 [ 461.137674] RDX: 0000000000000007 RSI: 0000000000000096 RDI: ffff8b3fded164b0 [ 461.137675] RBP: ffffa77e08cafc68 R08: 0000000000000026 R09: 0000000000000339 [ 461.137676] R10: ffff8b3fd060d410 R11: 0000000000000026 R12: ffffffffa4e14e20 [ 461.137677] R13: ffff8b3fdec22940 R14: ffff8b3fc1702da0 R15: ffff8b3fdec22940 [ 461.137678] FS: 00007efe43ee5700(0000) GS:ffff8b3fded00000(0000) knlGS:0000000000000000 [ 461.137679] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 461.137680] CR2: 00007efe30000010 CR3: 0000000301744003 CR4: 00000000001606e0 [ 461.137680] Call Trace: [ 461.137684] push_dl_task.part.46+0x3bc/0x460 [ 461.137686] task_woken_dl+0x60/0x80 [ 461.137689] ttwu_do_wakeup+0x4f/0x150 [ 461.137690] ttwu_do_activate+0x77/0x80 [ 461.137692] try_to_wake_up+0x1d6/0x4c0 [ 461.137693] wake_up_q+0x32/0x70 [ 461.137696] do_futex+0x7e7/0xb50 [ 461.137698] __x64_sys_futex+0x8b/0x180 [ 461.137701] do_syscall_64+0x5a/0x110 [ 461.137703] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 461.137705] RIP: 0033:0x7efe4918ca26 [ 461.137705] Code: 00 00 00 74 17 49 8b 48 20 44 8b 59 10 41 83 e3 30 41 83 fb 20 74 1e be 85 00 00 00 41 ba 01 00 00 00 41 b9 01 00 00 04 0f 05 <48> 3d 01 f0 ff ff 73 1f 31 c0 c3 be 8c 00 00 00 49 89 c8 4d 31 d2 [ 461.137738] RSP: 002b:00007efe43ee4928 EFLAGS: 00000283 ORIG_RAX: 00000000000000ca [ 461.137739] RAX: ffffffffffffffda RBX: 0000000005094df0 RCX: 00007efe4918ca26 [ 461.137740] RDX: 0000000000000001 RSI: 0000000000000085 RDI: 0000000005094e24 [ 461.137741] RBP: 00007efe43ee49c0 R08: 0000000005094e20 R09: 0000000004000001 [ 461.137741] R10: 0000000000000001 R11: 0000000000000283 R12: 0000000000000000 [ 461.137742] R13: 0000000005094df8 R14: 0000000000000001 R15: 0000000000448a10 [ 461.137743] ---[ end trace 187df4cad2bf7649 ]--- This warning happened in the push_dl_task(), because __add_running_bw()->cpufreq_update_util() is getting the rq_clock of the later_rq before its update, which takes place at activate_task(). The fix then is to update the rq_clock before calling add_running_bw(). To avoid double rq_clock_update() call, we set ENQUEUE_NOCLOCK flag to activate_task(). Reported-by: Daniel Casini Signed-off-by: Daniel Bristot de Oliveira Signed-off-by: Peter Zijlstra (Intel) Acked-by: Juri Lelli Cc: Clark Williams Cc: Linus Torvalds Cc: Luca Abeni Cc: Peter Zijlstra Cc: Steven Rostedt Cc: Thomas Gleixner Cc: Tommaso Cucinotta Fixes: e0367b12674b sched/deadline: Move CPU frequency selection triggering points Link: http://lkml.kernel.org/r/ca31d073a4788acf0684a8b255f14fea775ccf20.1532077269.git.bristot@redhat.com Signed-off-by: Ingo Molnar --- kernel/sched/deadline.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/kernel/sched/deadline.c b/kernel/sched/deadline.c index 10c7b51c0d1f..b5fbdde6afa9 100644 --- a/kernel/sched/deadline.c +++ b/kernel/sched/deadline.c @@ -2090,8 +2090,14 @@ retry: sub_rq_bw(&next_task->dl, &rq->dl); set_task_cpu(next_task, later_rq->cpu); add_rq_bw(&next_task->dl, &later_rq->dl); + + /* + * Update the later_rq clock here, because the clock is used + * by the cpufreq_update_util() inside __add_running_bw(). + */ + update_rq_clock(later_rq); add_running_bw(&next_task->dl, &later_rq->dl); - activate_task(later_rq, next_task, 0); + activate_task(later_rq, next_task, ENQUEUE_NOCLOCK); ret = 1; resched_curr(later_rq); -- cgit v1.2.3 From f3d133ee0a17d5694c6f21873eec9863e11fa423 Mon Sep 17 00:00:00 2001 From: Hailong Liu Date: Wed, 18 Jul 2018 08:46:55 +0800 Subject: sched/rt: Restore rt_runtime after disabling RT_RUNTIME_SHARE NO_RT_RUNTIME_SHARE feature is used to prevent a CPU borrow enough runtime with a spin-rt-task. However, if RT_RUNTIME_SHARE feature is enabled and rt_rq has borrowd enough rt_runtime at the beginning, rt_runtime can't be restored to its initial bandwidth rt_runtime after we disable RT_RUNTIME_SHARE. E.g. on my PC with 4 cores, procedure to reproduce: 1) Make sure RT_RUNTIME_SHARE is enabled cat /sys/kernel/debug/sched_features GENTLE_FAIR_SLEEPERS START_DEBIT NO_NEXT_BUDDY LAST_BUDDY CACHE_HOT_BUDDY WAKEUP_PREEMPTION NO_HRTICK NO_DOUBLE_TICK LB_BIAS NONTASK_CAPACITY TTWU_QUEUE NO_SIS_AVG_CPU SIS_PROP NO_WARN_DOUBLE_CLOCK RT_PUSH_IPI RT_RUNTIME_SHARE NO_LB_MIN ATTACH_AGE_LOAD WA_IDLE WA_WEIGHT WA_BIAS 2) Start a spin-rt-task ./loop_rr & 3) set affinity to the last cpu taskset -p 8 $pid_of_loop_rr 4) Observe that last cpu have borrowed enough runtime. cat /proc/sched_debug | grep rt_runtime .rt_runtime : 950.000000 .rt_runtime : 900.000000 .rt_runtime : 950.000000 .rt_runtime : 1000.000000 5) Disable RT_RUNTIME_SHARE echo NO_RT_RUNTIME_SHARE > /sys/kernel/debug/sched_features 6) Observe that rt_runtime can not been restored cat /proc/sched_debug | grep rt_runtime .rt_runtime : 950.000000 .rt_runtime : 900.000000 .rt_runtime : 950.000000 .rt_runtime : 1000.000000 This patch help to restore rt_runtime after we disable RT_RUNTIME_SHARE. Signed-off-by: Hailong Liu Signed-off-by: Jiang Biao Signed-off-by: Peter Zijlstra (Intel) Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: zhong.weidong@zte.com.cn Link: http://lkml.kernel.org/r/1531874815-39357-1-git-send-email-liu.hailong6@zte.com.cn Signed-off-by: Ingo Molnar --- kernel/sched/rt.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/kernel/sched/rt.c b/kernel/sched/rt.c index 572567078b60..eaaec8364f96 100644 --- a/kernel/sched/rt.c +++ b/kernel/sched/rt.c @@ -836,6 +836,8 @@ static int do_sched_rt_period_timer(struct rt_bandwidth *rt_b, int overrun) * can be time-consuming. Try to avoid it when possible. */ raw_spin_lock(&rt_rq->rt_runtime_lock); + if (!sched_feat(RT_RUNTIME_SHARE) && rt_rq->rt_runtime != RUNTIME_INF) + rt_rq->rt_runtime = rt_b->rt_runtime; skip = !rt_rq->rt_time && !rt_rq->rt_nr_running; raw_spin_unlock(&rt_rq->rt_runtime_lock); if (skip) -- cgit v1.2.3 From 6cbc304f2f360f25cc8607817239d6f4a2fd3dc5 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 10 May 2018 15:48:41 +0200 Subject: perf/x86/intel: Fix unwind errors from PEBS entries (mk-II) Vince reported the perf_fuzzer giving various unwinder warnings and Josh reported: > Deja vu. Most of these are related to perf PEBS, similar to the > following issue: > > b8000586c90b ("perf/x86/intel: Cure bogus unwind from PEBS entries") > > This is basically the ORC version of that. setup_pebs_sample_data() is > assembling a franken-pt_regs which ORC isn't happy about. RIP is > inconsistent with some of the other registers (like RSP and RBP). And where the previous unwinder only needed BP,SP ORC also requires IP. But we cannot spoof IP because then the sample will get displaced, entirely negating the point of PEBS. So cure the whole thing differently by doing the unwind early; this does however require a means to communicate we did the unwind early. We (ab)use an unused sample_type bit for this, which we set on events that fill out the data->callchain before the normal perf_prepare_sample(). Debugged-by: Josh Poimboeuf Reported-by: Vince Weaver Tested-by: Josh Poimboeuf Tested-by: Prashant Bhole Signed-off-by: Peter Zijlstra (Intel) Cc: Alexander Shishkin Cc: Andy Lutomirski Cc: Arnaldo Carvalho de Melo Cc: Arnaldo Carvalho de Melo Cc: Jiri Olsa Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/events/intel/core.c | 3 +++ arch/x86/events/intel/ds.c | 25 +++++++++++-------------- include/linux/perf_event.h | 1 + include/uapi/linux/perf_event.h | 2 ++ kernel/events/core.c | 6 ++++-- 5 files changed, 21 insertions(+), 16 deletions(-) diff --git a/arch/x86/events/intel/core.c b/arch/x86/events/intel/core.c index 707b2a96e516..86f0c15dcc2d 100644 --- a/arch/x86/events/intel/core.c +++ b/arch/x86/events/intel/core.c @@ -2997,6 +2997,9 @@ static int intel_pmu_hw_config(struct perf_event *event) } if (x86_pmu.pebs_aliases) x86_pmu.pebs_aliases(event); + + if (event->attr.sample_type & PERF_SAMPLE_CALLCHAIN) + event->attr.sample_type |= __PERF_SAMPLE_CALLCHAIN_EARLY; } if (needs_branch_stack(event)) { diff --git a/arch/x86/events/intel/ds.c b/arch/x86/events/intel/ds.c index 8cf03f101938..8dbba77e0518 100644 --- a/arch/x86/events/intel/ds.c +++ b/arch/x86/events/intel/ds.c @@ -1185,17 +1185,21 @@ static void setup_pebs_sample_data(struct perf_event *event, data->data_src.val = val; } + /* + * We must however always use iregs for the unwinder to stay sane; the + * record BP,SP,IP can point into thin air when the record is from a + * previous PMI context or an (I)RET happend between the record and + * PMI. + */ + if (sample_type & PERF_SAMPLE_CALLCHAIN) + data->callchain = perf_callchain(event, iregs); + /* * We use the interrupt regs as a base because the PEBS record does not * contain a full regs set, specifically it seems to lack segment * descriptors, which get used by things like user_mode(). * * In the simple case fix up only the IP for PERF_SAMPLE_IP. - * - * We must however always use BP,SP from iregs for the unwinder to stay - * sane; the record BP,SP can point into thin air when the record is - * from a previous PMI context or an (I)RET happend between the record - * and PMI. */ *regs = *iregs; @@ -1214,15 +1218,8 @@ static void setup_pebs_sample_data(struct perf_event *event, regs->si = pebs->si; regs->di = pebs->di; - /* - * Per the above; only set BP,SP if we don't need callchains. - * - * XXX: does this make sense? - */ - if (!(sample_type & PERF_SAMPLE_CALLCHAIN)) { - regs->bp = pebs->bp; - regs->sp = pebs->sp; - } + regs->bp = pebs->bp; + regs->sp = pebs->sp; #ifndef CONFIG_X86_32 regs->r8 = pebs->r8; diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index 1fa12887ec02..87f6db437e4a 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -1130,6 +1130,7 @@ extern void perf_callchain_kernel(struct perf_callchain_entry_ctx *entry, struct extern struct perf_callchain_entry * get_perf_callchain(struct pt_regs *regs, u32 init_nr, bool kernel, bool user, u32 max_stack, bool crosstask, bool add_mark); +extern struct perf_callchain_entry *perf_callchain(struct perf_event *event, struct pt_regs *regs); extern int get_callchain_buffers(int max_stack); extern void put_callchain_buffers(void); diff --git a/include/uapi/linux/perf_event.h b/include/uapi/linux/perf_event.h index b8e288a1f740..eeb787b1c53c 100644 --- a/include/uapi/linux/perf_event.h +++ b/include/uapi/linux/perf_event.h @@ -143,6 +143,8 @@ enum perf_event_sample_format { PERF_SAMPLE_PHYS_ADDR = 1U << 19, PERF_SAMPLE_MAX = 1U << 20, /* non-ABI */ + + __PERF_SAMPLE_CALLCHAIN_EARLY = 1ULL << 63, }; /* diff --git a/kernel/events/core.c b/kernel/events/core.c index 8f0434a9951a..cdb32cf8e33c 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -6343,7 +6343,7 @@ static u64 perf_virt_to_phys(u64 virt) static struct perf_callchain_entry __empty_callchain = { .nr = 0, }; -static struct perf_callchain_entry * +struct perf_callchain_entry * perf_callchain(struct perf_event *event, struct pt_regs *regs) { bool kernel = !event->attr.exclude_callchain_kernel; @@ -6382,7 +6382,9 @@ void perf_prepare_sample(struct perf_event_header *header, if (sample_type & PERF_SAMPLE_CALLCHAIN) { int size = 1; - data->callchain = perf_callchain(event, regs); + if (!(sample_type & __PERF_SAMPLE_CALLCHAIN_EARLY)) + data->callchain = perf_callchain(event, regs); + size += data->callchain->nr; header->size += size * sizeof(u64); -- cgit v1.2.3 From 7f635ff187ab6be0b350b3ec06791e376af238ab Mon Sep 17 00:00:00 2001 From: Mathieu Poirier Date: Mon, 16 Jul 2018 17:13:51 -0600 Subject: perf/core: Fix crash when using HW tracing kernel filters In function perf_event_parse_addr_filter(), the path::dentry of each struct perf_addr_filter is left unassigned (as it should be) when the pattern being parsed is related to kernel space. But in function perf_addr_filter_match() the same dentries are given to d_inode() where the value is not expected to be NULL, resulting in the following splat: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000058 pc : perf_event_mmap+0x2fc/0x5a0 lr : perf_event_mmap+0x2c8/0x5a0 Process uname (pid: 2860, stack limit = 0x000000001cbcca37) Call trace: perf_event_mmap+0x2fc/0x5a0 mmap_region+0x124/0x570 do_mmap+0x344/0x4f8 vm_mmap_pgoff+0xe4/0x110 vm_mmap+0x2c/0x40 elf_map+0x60/0x108 load_elf_binary+0x450/0x12c4 search_binary_handler+0x90/0x290 __do_execve_file.isra.13+0x6e4/0x858 sys_execve+0x3c/0x50 el0_svc_naked+0x30/0x34 This patch is fixing the problem by introducing a new check in function perf_addr_filter_match() to see if the filter's dentry is NULL. Signed-off-by: Mathieu Poirier Signed-off-by: Peter Zijlstra (Intel) Acked-by: Alexander Shishkin Cc: Arnaldo Carvalho de Melo Cc: Jiri Olsa Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Thomas Gleixner Cc: Vince Weaver Cc: acme@kernel.org Cc: miklos@szeredi.hu Cc: namhyung@kernel.org Cc: songliubraving@fb.com Fixes: 9511bce9fe8e ("perf/core: Fix bad use of igrab()") Link: http://lkml.kernel.org/r/1531782831-1186-1-git-send-email-mathieu.poirier@linaro.org Signed-off-by: Ingo Molnar --- kernel/events/core.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/kernel/events/core.c b/kernel/events/core.c index cdb32cf8e33c..eec2d5fb676b 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -7337,6 +7337,10 @@ static bool perf_addr_filter_match(struct perf_addr_filter *filter, struct file *file, unsigned long offset, unsigned long size) { + /* d_inode(NULL) won't be equal to any mapped user-space file */ + if (!filter->path.dentry) + return false; + if (d_inode(filter->path.dentry) != file_inode(file)) return false; -- cgit v1.2.3 From 92a4728608a8fd228c572bc8ff50dd98aa0ddf2a Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Tue, 24 Jul 2018 16:08:27 -0700 Subject: x86/boot: Fix if_changed build flip/flop bug Dirk Gouders reported that two consecutive "make" invocations on an already compiled tree will show alternating behaviors: $ make CALL scripts/checksyscalls.sh DESCEND objtool CHK include/generated/compile.h DATAREL arch/x86/boot/compressed/vmlinux Kernel: arch/x86/boot/bzImage is ready (#48) Building modules, stage 2. MODPOST 165 modules $ make CALL scripts/checksyscalls.sh DESCEND objtool CHK include/generated/compile.h LD arch/x86/boot/compressed/vmlinux ZOFFSET arch/x86/boot/zoffset.h AS arch/x86/boot/header.o LD arch/x86/boot/setup.elf OBJCOPY arch/x86/boot/setup.bin OBJCOPY arch/x86/boot/vmlinux.bin BUILD arch/x86/boot/bzImage Setup is 15644 bytes (padded to 15872 bytes). System is 6663 kB CRC 3eb90f40 Kernel: arch/x86/boot/bzImage is ready (#48) Building modules, stage 2. MODPOST 165 modules He bisected it back to: commit 98f78525371b ("x86/boot: Refuse to build with data relocations") The root cause was the use of the "if_changed" kbuild function multiple times for the same target. It was designed to only be used once per target, otherwise it will effectively always trigger, flipping back and forth between the two commands getting recorded by "if_changed". Instead, this patch merges the two commands into a single function to get stable build artifacts (i.e. .vmlinux.cmd), and a single build behavior. Bisected-and-Reported-by: Dirk Gouders Fix-Suggested-by: Masahiro Yamada Signed-off-by: Kees Cook Reviewed-by: Masahiro Yamada Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/20180724230827.GA37823@beast Signed-off-by: Ingo Molnar --- arch/x86/boot/compressed/Makefile | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile index fa42f895fdde..169c2feda14a 100644 --- a/arch/x86/boot/compressed/Makefile +++ b/arch/x86/boot/compressed/Makefile @@ -106,9 +106,13 @@ define cmd_check_data_rel done endef +# We need to run two commands under "if_changed", so merge them into a +# single invocation. +quiet_cmd_check-and-link-vmlinux = LD $@ + cmd_check-and-link-vmlinux = $(cmd_check_data_rel); $(cmd_ld) + $(obj)/vmlinux: $(vmlinux-objs-y) FORCE - $(call if_changed,check_data_rel) - $(call if_changed,ld) + $(call if_changed,check-and-link-vmlinux) OBJCOPYFLAGS_vmlinux.bin := -R .comment -S $(obj)/vmlinux.bin: vmlinux FORCE -- cgit v1.2.3 From 5613d31214eb4c5c04cdfce4966bb661c8b43191 Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Wed, 25 Jul 2018 08:35:17 +0200 Subject: nvmet: fixup crash on NULL device path When writing an empty string into the device_path attribute the kernel will crash with nvmet: failed to open block device (null): (-22) BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 This patch sanitizes the error handling for invalid device path settings. Fixes: a07b4970 ("nvmet: add a generic NVMe target") Signed-off-by: Hannes Reinecke Reviewed-by: Chaitanya Kulkarni Signed-off-by: Christoph Hellwig --- drivers/nvme/target/configfs.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/nvme/target/configfs.c b/drivers/nvme/target/configfs.c index d3f3b3ec4d1a..ebea1373d1b7 100644 --- a/drivers/nvme/target/configfs.c +++ b/drivers/nvme/target/configfs.c @@ -282,6 +282,7 @@ static ssize_t nvmet_ns_device_path_store(struct config_item *item, { struct nvmet_ns *ns = to_nvmet_ns(item); struct nvmet_subsys *subsys = ns->subsys; + size_t len; int ret; mutex_lock(&subsys->lock); @@ -289,10 +290,14 @@ static ssize_t nvmet_ns_device_path_store(struct config_item *item, if (ns->enabled) goto out_unlock; - kfree(ns->device_path); + ret = -EINVAL; + len = strcspn(page, "\n"); + if (!len) + goto out_unlock; + kfree(ns->device_path); ret = -ENOMEM; - ns->device_path = kstrndup(page, strcspn(page, "\n"), GFP_KERNEL); + ns->device_path = kstrndup(page, len, GFP_KERNEL); if (!ns->device_path) goto out_unlock; -- cgit v1.2.3 From 405a7519607e7a364114896264440c0f87b325c0 Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Wed, 25 Jul 2018 08:34:45 +0200 Subject: nvmet: only check for filebacking on -ENOTBLK We only need to check for a file-backed namespace if nvmet_bdev_ns_enable() returns -ENOTBLK. For any other error it's pointless as the open() error will remain the same. Fixes: d5eff33e ("nvmet: add simple file backed ns support") Signed-off-by: Hannes Reinecke Reviewed-by: Chaitanya Kulkarni Signed-off-by: Christoph Hellwig --- drivers/nvme/target/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/nvme/target/core.c b/drivers/nvme/target/core.c index 74d4b785d2da..9838103f2d62 100644 --- a/drivers/nvme/target/core.c +++ b/drivers/nvme/target/core.c @@ -339,7 +339,7 @@ int nvmet_ns_enable(struct nvmet_ns *ns) goto out_unlock; ret = nvmet_bdev_ns_enable(ns); - if (ret) + if (ret == -ENOTBLK) ret = nvmet_file_ns_enable(ns); if (ret) goto out_unlock; -- cgit v1.2.3 From dc0e36581eb2da1aa3c63ceeff0f10ef1e899b2a Mon Sep 17 00:00:00 2001 From: Dirk Mueller Date: Wed, 25 Jul 2018 13:10:28 +0200 Subject: arm64: Check for errata before evaluating cpu features Since commit d3aec8a28be3b8 ("arm64: capabilities: Restrict KPTI detection to boot-time CPUs") we rely on errata flags being already populated during feature enumeration. The order of errata and features was flipped as part of commit ed478b3f9e4a ("arm64: capabilities: Group handling of features and errata workarounds"). Return to the orginal order of errata and feature evaluation to ensure errata flags are present during feature evaluation. Fixes: ed478b3f9e4a ("arm64: capabilities: Group handling of features and errata workarounds") CC: Suzuki K Poulose CC: Marc Zyngier Signed-off-by: Dirk Mueller Reviewed-by: Suzuki K Poulose Signed-off-by: Will Deacon --- arch/arm64/kernel/cpufeature.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c index f24892a40d2c..c6d80743f4ed 100644 --- a/arch/arm64/kernel/cpufeature.c +++ b/arch/arm64/kernel/cpufeature.c @@ -1351,9 +1351,9 @@ static void __update_cpu_capabilities(const struct arm64_cpu_capabilities *caps, static void update_cpu_capabilities(u16 scope_mask) { - __update_cpu_capabilities(arm64_features, scope_mask, "detected:"); __update_cpu_capabilities(arm64_errata, scope_mask, "enabling workaround for"); + __update_cpu_capabilities(arm64_features, scope_mask, "detected:"); } static int __enable_cpu_capability(void *arg) @@ -1408,8 +1408,8 @@ __enable_cpu_capabilities(const struct arm64_cpu_capabilities *caps, static void __init enable_cpu_capabilities(u16 scope_mask) { - __enable_cpu_capabilities(arm64_features, scope_mask); __enable_cpu_capabilities(arm64_errata, scope_mask); + __enable_cpu_capabilities(arm64_features, scope_mask); } /* -- cgit v1.2.3 From 7b0eb6b41a08fa1fa0d04b1c53becd62b5fbfaee Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Mon, 23 Jul 2018 10:18:23 -0400 Subject: arm64: fix vmemmap BUILD_BUG_ON() triggering on !vmemmap setups Arnd reports the following arm64 randconfig build error with the PSI patches that add another page flag: /git/arm-soc/arch/arm64/mm/init.c: In function 'mem_init': /git/arm-soc/include/linux/compiler.h:357:38: error: call to '__compiletime_assert_618' declared with attribute error: BUILD_BUG_ON failed: sizeof(struct page) > (1 << STRUCT_PAGE_MAX_SHIFT) The additional page flag causes other information stored in page->flags to get bumped into their own struct page member: #if SECTIONS_WIDTH+ZONES_WIDTH+NODES_SHIFT+LAST_CPUPID_SHIFT <= BITS_PER_LONG - NR_PAGEFLAGS #define LAST_CPUPID_WIDTH LAST_CPUPID_SHIFT #else #define LAST_CPUPID_WIDTH 0 #endif #if defined(CONFIG_NUMA_BALANCING) && LAST_CPUPID_WIDTH == 0 #define LAST_CPUPID_NOT_IN_PAGE_FLAGS #endif which in turn causes the struct page size to exceed the size set in STRUCT_PAGE_MAX_SHIFT. This value is an an estimate used to size the VMEMMAP page array according to address space and struct page size. However, the check is performed - and triggers here - on a !VMEMMAP config, which consumes an additional 22 page bits for the sparse section id. When VMEMMAP is enabled, those bits are returned, cpupid doesn't need its own member, and the page passes the VMEMMAP check. Restrict that check to the situation it was meant to check: that we are sizing the VMEMMAP page array correctly. Says Arnd: Further experiments show that the build error already existed before, but was only triggered with larger values of CONFIG_NR_CPU and/or CONFIG_NODES_SHIFT that might be used in actual configurations but not in randconfig builds. With longer CPU and node masks, I could recreate the problem with kernels as old as linux-4.7 when arm64 NUMA support got added. Reported-by: Arnd Bergmann Tested-by: Arnd Bergmann Cc: stable@vger.kernel.org Fixes: 1a2db300348b ("arm64, numa: Add NUMA support for arm64 platforms.") Fixes: 3e1907d5bf5a ("arm64: mm: move vmemmap region right below the linear region") Signed-off-by: Johannes Weiner Signed-off-by: Will Deacon --- arch/arm64/mm/init.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c index 325cfb3b858a..9abf8a1e7b25 100644 --- a/arch/arm64/mm/init.c +++ b/arch/arm64/mm/init.c @@ -611,11 +611,13 @@ void __init mem_init(void) BUILD_BUG_ON(TASK_SIZE_32 > TASK_SIZE_64); #endif +#ifdef CONFIG_SPARSEMEM_VMEMMAP /* * Make sure we chose the upper bound of sizeof(struct page) - * correctly. + * correctly when sizing the VMEMMAP array. */ BUILD_BUG_ON(sizeof(struct page) > (1 << STRUCT_PAGE_MAX_SHIFT)); +#endif if (PAGE_SIZE >= 16384 && get_num_physpages() <= 128) { extern int sysctl_overcommit_memory; -- cgit v1.2.3 From d0eb06afe712b7b103b6361f40a9a0c638524669 Mon Sep 17 00:00:00 2001 From: Kiran Kumar Modukuri Date: Wed, 25 Jul 2018 14:31:20 +0100 Subject: fscache: Allow cancelled operations to be enqueued Alter the state-check assertion in fscache_enqueue_operation() to allow cancelled operations to be given processing time so they can be cleaned up. Also fix a debugging statement that was requiring such operations to have an object assigned. Fixes: 9ae326a69004 ("CacheFiles: A cache that backs onto a mounted filesystem") Reported-by: Kiran Kumar Modukuri Signed-off-by: David Howells --- fs/fscache/operation.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/fs/fscache/operation.c b/fs/fscache/operation.c index e30c5975ea58..8d265790374c 100644 --- a/fs/fscache/operation.c +++ b/fs/fscache/operation.c @@ -70,7 +70,8 @@ void fscache_enqueue_operation(struct fscache_operation *op) ASSERT(op->processor != NULL); ASSERT(fscache_object_is_available(op->object)); ASSERTCMP(atomic_read(&op->usage), >, 0); - ASSERTCMP(op->state, ==, FSCACHE_OP_ST_IN_PROGRESS); + ASSERTIFCMP(op->state != FSCACHE_OP_ST_IN_PROGRESS, + op->state, ==, FSCACHE_OP_ST_CANCELLED); fscache_stat(&fscache_n_op_enqueue); switch (op->flags & FSCACHE_OP_TYPE) { @@ -499,7 +500,8 @@ void fscache_put_operation(struct fscache_operation *op) struct fscache_cache *cache; _enter("{OBJ%x OP%x,%d}", - op->object->debug_id, op->debug_id, atomic_read(&op->usage)); + op->object ? op->object->debug_id : 0, + op->debug_id, atomic_read(&op->usage)); ASSERTCMP(atomic_read(&op->usage), >, 0); -- cgit v1.2.3 From 934140ab028713a61de8bca58c05332416d037d1 Mon Sep 17 00:00:00 2001 From: Kiran Kumar Modukuri Date: Tue, 18 Jul 2017 16:25:49 -0700 Subject: cachefiles: Fix refcounting bug in backing-file read monitoring cachefiles_read_waiter() has the right to access a 'monitor' object by virtue of being called under the waitqueue lock for one of the pages in its purview. However, it has no ref on that monitor object or on the associated operation. What it is allowed to do is to move the monitor object to the operation's to_do list, but once it drops the work_lock, it's actually no longer permitted to access that object. However, it is trying to enqueue the retrieval operation for processing - but it can only do this via a pointer in the monitor object, something it shouldn't be doing. If it doesn't enqueue the operation, the operation may not get processed. If the order is flipped so that the enqueue is first, then it's possible for the work processor to look at the to_do list before the monitor is enqueued upon it. Fix this by getting a ref on the operation so that we can trust that it will still be there once we've added the monitor to the to_do list and dropped the work_lock. The op can then be enqueued after the lock is dropped. The bug can manifest in one of a couple of ways. The first manifestation looks like: FS-Cache: FS-Cache: Assertion failed FS-Cache: 6 == 5 is false ------------[ cut here ]------------ kernel BUG at fs/fscache/operation.c:494! RIP: 0010:fscache_put_operation+0x1e3/0x1f0 ... fscache_op_work_func+0x26/0x50 process_one_work+0x131/0x290 worker_thread+0x45/0x360 kthread+0xf8/0x130 ? create_worker+0x190/0x190 ? kthread_cancel_work_sync+0x10/0x10 ret_from_fork+0x1f/0x30 This is due to the operation being in the DEAD state (6) rather than INITIALISED, COMPLETE or CANCELLED (5) because it's already passed through fscache_put_operation(). The bug can also manifest like the following: kernel BUG at fs/fscache/operation.c:69! ... [exception RIP: fscache_enqueue_operation+246] ... #7 [ffff883fff083c10] fscache_enqueue_operation at ffffffffa0b793c6 #8 [ffff883fff083c28] cachefiles_read_waiter at ffffffffa0b15a48 #9 [ffff883fff083c48] __wake_up_common at ffffffff810af028 I'm not entirely certain as to which is line 69 in Lei's kernel, so I'm not entirely clear which assertion failed. Fixes: 9ae326a69004 ("CacheFiles: A cache that backs onto a mounted filesystem") Reported-by: Lei Xue Reported-by: Vegard Nossum Reported-by: Anthony DeRobertis Reported-by: NeilBrown Reported-by: Daniel Axtens Reported-by: Kiran Kumar Modukuri Signed-off-by: David Howells Reviewed-by: Daniel Axtens --- fs/cachefiles/rdwr.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/fs/cachefiles/rdwr.c b/fs/cachefiles/rdwr.c index 5082c8a49686..40f7595aad10 100644 --- a/fs/cachefiles/rdwr.c +++ b/fs/cachefiles/rdwr.c @@ -27,6 +27,7 @@ static int cachefiles_read_waiter(wait_queue_entry_t *wait, unsigned mode, struct cachefiles_one_read *monitor = container_of(wait, struct cachefiles_one_read, monitor); struct cachefiles_object *object; + struct fscache_retrieval *op = monitor->op; struct wait_bit_key *key = _key; struct page *page = wait->private; @@ -51,16 +52,22 @@ static int cachefiles_read_waiter(wait_queue_entry_t *wait, unsigned mode, list_del(&wait->entry); /* move onto the action list and queue for FS-Cache thread pool */ - ASSERT(monitor->op); + ASSERT(op); - object = container_of(monitor->op->op.object, - struct cachefiles_object, fscache); + /* We need to temporarily bump the usage count as we don't own a ref + * here otherwise cachefiles_read_copier() may free the op between the + * monitor being enqueued on the op->to_do list and the op getting + * enqueued on the work queue. + */ + fscache_get_retrieval(op); + object = container_of(op->op.object, struct cachefiles_object, fscache); spin_lock(&object->work_lock); - list_add_tail(&monitor->op_link, &monitor->op->to_do); + list_add_tail(&monitor->op_link, &op->to_do); spin_unlock(&object->work_lock); - fscache_enqueue_retrieval(monitor->op); + fscache_enqueue_retrieval(op); + fscache_put_retrieval(op); return 0; } -- cgit v1.2.3 From f29507ce66701084c39aeb1b0ae71690cbff3554 Mon Sep 17 00:00:00 2001 From: Kiran Kumar Modukuri Date: Thu, 21 Jun 2018 13:31:44 -0700 Subject: fscache: Fix reference overput in fscache_attach_object() error handling When a cookie is allocated that causes fscache_object structs to be allocated, those objects are initialised with the cookie pointer, but aren't blessed with a ref on that cookie unless the attachment is successfully completed in fscache_attach_object(). If attachment fails because the parent object was dying or there was a collision, fscache_attach_object() returns without incrementing the cookie counter - but upon failure of this function, the object is released which then puts the cookie, whether or not a ref was taken on the cookie. Fix this by taking a ref on the cookie when it is assigned in fscache_object_init(), even when we're creating a root object. Analysis from Kiran Kumar: This bug has been seen in 4.4.0-124-generic #148-Ubuntu kernel BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1776277 fscache cookie ref count updated incorrectly during fscache object allocation resulting in following Oops. kernel BUG at /build/linux-Y09MKI/linux-4.4.0/fs/fscache/internal.h:321! kernel BUG at /build/linux-Y09MKI/linux-4.4.0/fs/fscache/cookie.c:639! [Cause] Two threads are trying to do operate on a cookie and two objects. (1) One thread tries to unmount the filesystem and in process goes over a huge list of objects marking them dead and deleting the objects. cookie->usage is also decremented in following path: nfs_fscache_release_super_cookie -> __fscache_relinquish_cookie ->__fscache_cookie_put ->BUG_ON(atomic_read(&cookie->usage) <= 0); (2) A second thread tries to lookup an object for reading data in following path: fscache_alloc_object 1) cachefiles_alloc_object -> fscache_object_init -> assign cookie, but usage not bumped. 2) fscache_attach_object -> fails in cant_attach_object because the cookie's backing object or cookie's->parent object are going away 3) fscache_put_object -> cachefiles_put_object ->fscache_object_destroy ->fscache_cookie_put ->BUG_ON(atomic_read(&cookie->usage) <= 0); [NOTE from dhowells] It's unclear as to the circumstances in which (2) can take place, given that thread (1) is in nfs_kill_super(), however a conflicting NFS mount with slightly different parameters that creates a different superblock would do it. A backtrace from Kiran seems to show that this is a possibility: kernel BUG at/build/linux-Y09MKI/linux-4.4.0/fs/fscache/cookie.c:639! ... RIP: __fscache_cookie_put+0x3a/0x40 [fscache] Call Trace: __fscache_relinquish_cookie+0x87/0x120 [fscache] nfs_fscache_release_super_cookie+0x2d/0xb0 [nfs] nfs_kill_super+0x29/0x40 [nfs] deactivate_locked_super+0x48/0x80 deactivate_super+0x5c/0x60 cleanup_mnt+0x3f/0x90 __cleanup_mnt+0x12/0x20 task_work_run+0x86/0xb0 exit_to_usermode_loop+0xc2/0xd0 syscall_return_slowpath+0x4e/0x60 int_ret_from_sys_call+0x25/0x9f [Fix] Bump up the cookie usage in fscache_object_init, when it is first being assigned a cookie atomically such that the cookie is added and bumped up if its refcount is not zero. Remove the assignment in fscache_attach_object(). [Testcase] I have run ~100 hours of NFS stress tests and not seen this bug recur. [Regression Potential] - Limited to fscache/cachefiles. Fixes: ccc4fc3d11e9 ("FS-Cache: Implement the cookie management part of the netfs API") Signed-off-by: Kiran Kumar Modukuri Signed-off-by: David Howells --- fs/cachefiles/bind.c | 3 ++- fs/fscache/cache.c | 2 +- fs/fscache/cookie.c | 7 ++++--- fs/fscache/object.c | 1 + 4 files changed, 8 insertions(+), 5 deletions(-) diff --git a/fs/cachefiles/bind.c b/fs/cachefiles/bind.c index d9f001078e08..4a717d400807 100644 --- a/fs/cachefiles/bind.c +++ b/fs/cachefiles/bind.c @@ -218,7 +218,8 @@ static int cachefiles_daemon_add_cache(struct cachefiles_cache *cache) "%s", fsdef->dentry->d_sb->s_id); - fscache_object_init(&fsdef->fscache, NULL, &cache->cache); + fscache_object_init(&fsdef->fscache, &fscache_fsdef_index, + &cache->cache); ret = fscache_add_cache(&cache->cache, &fsdef->fscache, cache->tag); if (ret < 0) diff --git a/fs/fscache/cache.c b/fs/fscache/cache.c index c184c5a356ff..cdcb376ef8df 100644 --- a/fs/fscache/cache.c +++ b/fs/fscache/cache.c @@ -220,6 +220,7 @@ int fscache_add_cache(struct fscache_cache *cache, { struct fscache_cache_tag *tag; + ASSERTCMP(ifsdef->cookie, ==, &fscache_fsdef_index); BUG_ON(!cache->ops); BUG_ON(!ifsdef); @@ -248,7 +249,6 @@ int fscache_add_cache(struct fscache_cache *cache, if (!cache->kobj) goto error; - ifsdef->cookie = &fscache_fsdef_index; ifsdef->cache = cache; cache->fsdef = ifsdef; diff --git a/fs/fscache/cookie.c b/fs/fscache/cookie.c index 97137d7ec5ee..83bfe04456b6 100644 --- a/fs/fscache/cookie.c +++ b/fs/fscache/cookie.c @@ -516,6 +516,7 @@ static int fscache_alloc_object(struct fscache_cache *cache, goto error; } + ASSERTCMP(object->cookie, ==, cookie); fscache_stat(&fscache_n_object_alloc); object->debug_id = atomic_inc_return(&fscache_object_debug_id); @@ -571,6 +572,8 @@ static int fscache_attach_object(struct fscache_cookie *cookie, _enter("{%s},{OBJ%x}", cookie->def->name, object->debug_id); + ASSERTCMP(object->cookie, ==, cookie); + spin_lock(&cookie->lock); /* there may be multiple initial creations of this object, but we only @@ -610,9 +613,7 @@ static int fscache_attach_object(struct fscache_cookie *cookie, spin_unlock(&cache->object_list_lock); } - /* attach to the cookie */ - object->cookie = cookie; - fscache_cookie_get(cookie, fscache_cookie_get_attach_object); + /* Attach to the cookie. The object already has a ref on it. */ hlist_add_head(&object->cookie_link, &cookie->backing_objects); fscache_objlist_add(object); diff --git a/fs/fscache/object.c b/fs/fscache/object.c index 20e0d0a4dc8c..9edc920f651f 100644 --- a/fs/fscache/object.c +++ b/fs/fscache/object.c @@ -327,6 +327,7 @@ void fscache_object_init(struct fscache_object *object, object->store_limit_l = 0; object->cache = cache; object->cookie = cookie; + fscache_cookie_get(cookie, fscache_cookie_get_attach_object); object->parent = NULL; #ifdef CONFIG_FSCACHE_OBJECT_LIST RB_CLEAR_NODE(&object->objlist_link); -- cgit v1.2.3 From 5ce83d4bb7d8e11e8c1c687d09f4b5ae67ef3ce3 Mon Sep 17 00:00:00 2001 From: Kiran Kumar Modukuri Date: Thu, 21 Jun 2018 13:25:53 -0700 Subject: cachefiles: Fix missing clear of the CACHEFILES_OBJECT_ACTIVE flag In cachefiles_mark_object_active(), the new object is marked active and then we try to add it to the active object tree. If a conflicting object is already present, we want to wait for that to go away. After the wait, we go round again and try to re-mark the object as being active - but it's already marked active from the first time we went through and a BUG is issued. Fix this by clearing the CACHEFILES_OBJECT_ACTIVE flag before we try again. Analysis from Kiran Kumar Modukuri: [Impact] Oops during heavy NFS + FSCache + Cachefiles CacheFiles: Error: Overlong wait for old active object to go away. BUG: unable to handle kernel NULL pointer dereference at 0000000000000002 CacheFiles: Error: Object already active kernel BUG at fs/cachefiles/namei.c:163! [Cause] In a heavily loaded system with big files being read and truncated, an fscache object for a cookie is being dropped and a new object being looked. The new object being looked for has to wait for the old object to go away before the new object is moved to active state. [Fix] Clear the flag 'CACHEFILES_OBJECT_ACTIVE' for the new object when retrying the object lookup. [Testcase] Have run ~100 hours of NFS stress tests and have not seen this bug recur. [Regression Potential] - Limited to fscache/cachefiles. Fixes: 9ae326a69004 ("CacheFiles: A cache that backs onto a mounted filesystem") Signed-off-by: Kiran Kumar Modukuri Signed-off-by: David Howells --- fs/cachefiles/namei.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/cachefiles/namei.c b/fs/cachefiles/namei.c index ab0bbe93b398..b5d6dd72dfa0 100644 --- a/fs/cachefiles/namei.c +++ b/fs/cachefiles/namei.c @@ -186,6 +186,7 @@ try_again: * need to wait for it to be destroyed */ wait_for_old_object: trace_cachefiles_wait_active(object, dentry, xobject); + clear_bit(CACHEFILES_OBJECT_ACTIVE, &object->flags); if (fscache_object_is_live(&xobject->fscache)) { pr_err("\n"); @@ -248,7 +249,6 @@ wait_for_old_object: goto try_again; requeue: - clear_bit(CACHEFILES_OBJECT_ACTIVE, &object->flags); cache->cache.ops->put_object(&xobject->fscache, cachefiles_obj_put_wait_timeo); _leave(" = -ETIMEDOUT"); return -ETIMEDOUT; -- cgit v1.2.3 From c2412ac45a8f8f1cd582723c1a139608694d410d Mon Sep 17 00:00:00 2001 From: Kiran Kumar Modukuri Date: Thu, 21 Jun 2018 13:25:53 -0700 Subject: cachefiles: Wait rather than BUG'ing on "Unexpected object collision" If we meet a conflicting object that is marked FSCACHE_OBJECT_IS_LIVE in the active object tree, we have been emitting a BUG after logging information about it and the new object. Instead, we should wait for the CACHEFILES_OBJECT_ACTIVE flag to be cleared on the old object (or return an error). The ACTIVE flag should be cleared after it has been removed from the active object tree. A timeout of 60s is used in the wait, so we shouldn't be able to get stuck there. Fixes: 9ae326a69004 ("CacheFiles: A cache that backs onto a mounted filesystem") Signed-off-by: Kiran Kumar Modukuri Signed-off-by: David Howells --- fs/cachefiles/namei.c | 1 - 1 file changed, 1 deletion(-) diff --git a/fs/cachefiles/namei.c b/fs/cachefiles/namei.c index b5d6dd72dfa0..af2b17b21b94 100644 --- a/fs/cachefiles/namei.c +++ b/fs/cachefiles/namei.c @@ -192,7 +192,6 @@ wait_for_old_object: pr_err("\n"); pr_err("Error: Unexpected object collision\n"); cachefiles_printk_object(object, xobject); - BUG(); } atomic_inc(&xobject->usage); write_unlock(&cache->active_lock); -- cgit v1.2.3 From 1863c387259b629e4ebfb255495f67cd06aa229b Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (VMware)" Date: Tue, 24 Jul 2018 19:13:31 -0400 Subject: tracing: Fix double free of event_trigger_data Running the following: # cd /sys/kernel/debug/tracing # echo 500000 > buffer_size_kb [ Or some other number that takes up most of memory ] # echo snapshot > events/sched/sched_switch/trigger Triggers the following bug: ------------[ cut here ]------------ kernel BUG at mm/slub.c:296! invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC PTI CPU: 6 PID: 6878 Comm: bash Not tainted 4.18.0-rc6-test+ #1066 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016 RIP: 0010:kfree+0x16c/0x180 Code: 05 41 0f b6 72 51 5b 5d 41 5c 4c 89 d7 e9 ac b3 f8 ff 48 89 d9 48 89 da 41 b8 01 00 00 00 5b 5d 41 5c 4c 89 d6 e9 f4 f3 ff ff <0f> 0b 0f 0b 48 8b 3d d9 d8 f9 00 e9 c1 fe ff ff 0f 1f 40 00 0f 1f RSP: 0018:ffffb654436d3d88 EFLAGS: 00010246 RAX: ffff91a9d50f3d80 RBX: ffff91a9d50f3d80 RCX: ffff91a9d50f3d80 RDX: 00000000000006a4 RSI: ffff91a9de5a60e0 RDI: ffff91a9d9803500 RBP: ffffffff8d267c80 R08: 00000000000260e0 R09: ffffffff8c1a56be R10: fffff0d404543cc0 R11: 0000000000000389 R12: ffffffff8c1a56be R13: ffff91a9d9930e18 R14: ffff91a98c0c2890 R15: ffffffff8d267d00 FS: 00007f363ea64700(0000) GS:ffff91a9de580000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055c1cacc8e10 CR3: 00000000d9b46003 CR4: 00000000001606e0 Call Trace: event_trigger_callback+0xee/0x1d0 event_trigger_write+0xfc/0x1a0 __vfs_write+0x33/0x190 ? handle_mm_fault+0x115/0x230 ? _cond_resched+0x16/0x40 vfs_write+0xb0/0x190 ksys_write+0x52/0xc0 do_syscall_64+0x5a/0x160 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f363e16ab50 Code: 73 01 c3 48 8b 0d 38 83 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 79 db 2c 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 1e e3 01 00 48 89 04 24 RSP: 002b:00007fff9a4c6378 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000009 RCX: 00007f363e16ab50 RDX: 0000000000000009 RSI: 000055c1cacc8e10 RDI: 0000000000000001 RBP: 000055c1cacc8e10 R08: 00007f363e435740 R09: 00007f363ea64700 R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000009 R13: 0000000000000001 R14: 00007f363e4345e0 R15: 00007f363e4303c0 Modules linked in: ip6table_filter ip6_tables snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device i915 snd_pcm snd_timer i2c_i801 snd soundcore i2c_algo_bit drm_kms_helper 86_pkg_temp_thermal video kvm_intel kvm irqbypass wmi e1000e ---[ end trace d301afa879ddfa25 ]--- The cause is because the register_snapshot_trigger() call failed to allocate the snapshot buffer, and then called unregister_trigger() which freed the data that was passed to it. Then on return to the function that called register_snapshot_trigger(), as it sees it failed to register, it frees the trigger_data again and causes a double free. By calling event_trigger_init() on the trigger_data (which only ups the reference counter for it), and then event_trigger_free() afterward, the trigger_data would not get freed by the registering trigger function as it would only up and lower the ref count for it. If the register trigger function fails, then the event_trigger_free() called after it will free the trigger data normally. Link: http://lkml.kernel.org/r/20180724191331.738eb819@gandalf.local.home Cc: stable@vger.kerne.org Fixes: 93e31ffbf417 ("tracing: Add 'snapshot' event trigger command") Reported-by: Masami Hiramatsu Reviewed-by: Masami Hiramatsu Signed-off-by: Steven Rostedt (VMware) --- kernel/trace/trace_events_trigger.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/kernel/trace/trace_events_trigger.c b/kernel/trace/trace_events_trigger.c index d18249683682..d18ec0e58be2 100644 --- a/kernel/trace/trace_events_trigger.c +++ b/kernel/trace/trace_events_trigger.c @@ -679,6 +679,8 @@ event_trigger_callback(struct event_command *cmd_ops, goto out_free; out_reg: + /* Up the trigger_data count to make sure reg doesn't free it on failure */ + event_trigger_init(trigger_ops, trigger_data); ret = cmd_ops->reg(glob, trigger_ops, trigger_data, file); /* * The above returns on success the # of functions enabled, @@ -686,11 +688,13 @@ event_trigger_callback(struct event_command *cmd_ops, * Consider no functions a failure too. */ if (!ret) { + cmd_ops->unreg(glob, trigger_ops, trigger_data, file); ret = -ENOENT; - goto out_free; - } else if (ret < 0) - goto out_free; - ret = 0; + } else if (ret > 0) + ret = 0; + + /* Down the counter of trigger_data or free it if not used anymore */ + event_trigger_free(trigger_ops, trigger_data); out: return ret; -- cgit v1.2.3 From 73c8d8945505acdcbae137c2e00a1232e0be709f Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Sat, 14 Jul 2018 01:28:15 +0900 Subject: ring_buffer: tracing: Inherit the tracing setting to next ring buffer Maintain the tracing on/off setting of the ring_buffer when switching to the trace buffer snapshot. Taking a snapshot is done by swapping the backup ring buffer (max_tr_buffer). But since the tracing on/off setting is defined by the ring buffer, when swapping it, the tracing on/off setting can also be changed. This causes a strange result like below: /sys/kernel/debug/tracing # cat tracing_on 1 /sys/kernel/debug/tracing # echo 0 > tracing_on /sys/kernel/debug/tracing # cat tracing_on 0 /sys/kernel/debug/tracing # echo 1 > snapshot /sys/kernel/debug/tracing # cat tracing_on 1 /sys/kernel/debug/tracing # echo 1 > snapshot /sys/kernel/debug/tracing # cat tracing_on 0 We don't touch tracing_on, but snapshot changes tracing_on setting each time. This is an anomaly, because user doesn't know that each "ring_buffer" stores its own tracing-enable state and the snapshot is done by swapping ring buffers. Link: http://lkml.kernel.org/r/153149929558.11274.11730609978254724394.stgit@devbox Cc: Ingo Molnar Cc: Shuah Khan Cc: Tom Zanussi Cc: Hiraku Toyooka Cc: stable@vger.kernel.org Fixes: debdd57f5145 ("tracing: Make a snapshot feature available from userspace") Signed-off-by: Masami Hiramatsu [ Updated commit log and comment in the code ] Signed-off-by: Steven Rostedt (VMware) --- include/linux/ring_buffer.h | 1 + kernel/trace/ring_buffer.c | 16 ++++++++++++++++ kernel/trace/trace.c | 6 ++++++ 3 files changed, 23 insertions(+) diff --git a/include/linux/ring_buffer.h b/include/linux/ring_buffer.h index b72ebdff0b77..003d09ab308d 100644 --- a/include/linux/ring_buffer.h +++ b/include/linux/ring_buffer.h @@ -165,6 +165,7 @@ void ring_buffer_record_enable(struct ring_buffer *buffer); void ring_buffer_record_off(struct ring_buffer *buffer); void ring_buffer_record_on(struct ring_buffer *buffer); int ring_buffer_record_is_on(struct ring_buffer *buffer); +int ring_buffer_record_is_set_on(struct ring_buffer *buffer); void ring_buffer_record_disable_cpu(struct ring_buffer *buffer, int cpu); void ring_buffer_record_enable_cpu(struct ring_buffer *buffer, int cpu); diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index 6a46af21765c..0b0b688ea166 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -3226,6 +3226,22 @@ int ring_buffer_record_is_on(struct ring_buffer *buffer) return !atomic_read(&buffer->record_disabled); } +/** + * ring_buffer_record_is_set_on - return true if the ring buffer is set writable + * @buffer: The ring buffer to see if write is set enabled + * + * Returns true if the ring buffer is set writable by ring_buffer_record_on(). + * Note that this does NOT mean it is in a writable state. + * + * It may return true when the ring buffer has been disabled by + * ring_buffer_record_disable(), as that is a temporary disabling of + * the ring buffer. + */ +int ring_buffer_record_is_set_on(struct ring_buffer *buffer) +{ + return !(atomic_read(&buffer->record_disabled) & RB_BUFFER_OFF); +} + /** * ring_buffer_record_disable_cpu - stop all writes into the cpu_buffer * @buffer: The ring buffer to stop writes to. diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 87cf25171fb8..823687997b01 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -1373,6 +1373,12 @@ update_max_tr(struct trace_array *tr, struct task_struct *tsk, int cpu) arch_spin_lock(&tr->max_lock); + /* Inherit the recordable setting from trace_buffer */ + if (ring_buffer_record_is_set_on(tr->trace_buffer.buffer)) + ring_buffer_record_on(tr->max_buffer.buffer); + else + ring_buffer_record_off(tr->max_buffer.buffer); + swap(tr->trace_buffer.buffer, tr->max_buffer.buffer); __update_max_tr(tr, tsk, cpu); -- cgit v1.2.3 From 82f4f3e69c5c29bce940dd87a2c0f16c51d48d17 Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Sat, 14 Jul 2018 01:28:44 +0900 Subject: selftests/ftrace: Add snapshot and tracing_on test case Add a testcase for checking snapshot and tracing_on relationship. This ensures that the snapshotting doesn't affect current tracing on/off settings. Link: http://lkml.kernel.org/r/153149932412.11274.15289227592627901488.stgit@devbox Cc: Tom Zanussi Cc: Hiraku Toyooka Signed-off-by: Masami Hiramatsu Cc: Ingo Molnar Cc: Shuah Khan Cc: linux-kselftest@vger.kernel.org Signed-off-by: Steven Rostedt (VMware) --- .../selftests/ftrace/test.d/00basic/snapshot.tc | 28 ++++++++++++++++++++++ 1 file changed, 28 insertions(+) create mode 100644 tools/testing/selftests/ftrace/test.d/00basic/snapshot.tc diff --git a/tools/testing/selftests/ftrace/test.d/00basic/snapshot.tc b/tools/testing/selftests/ftrace/test.d/00basic/snapshot.tc new file mode 100644 index 000000000000..3b1f45e13a2e --- /dev/null +++ b/tools/testing/selftests/ftrace/test.d/00basic/snapshot.tc @@ -0,0 +1,28 @@ +#!/bin/sh +# description: Snapshot and tracing setting +# flags: instance + +[ ! -f snapshot ] && exit_unsupported + +echo "Set tracing off" +echo 0 > tracing_on + +echo "Allocate and take a snapshot" +echo 1 > snapshot + +# Since trace buffer is empty, snapshot is also empty, but allocated +grep -q "Snapshot is allocated" snapshot + +echo "Ensure keep tracing off" +test `cat tracing_on` -eq 0 + +echo "Set tracing on" +echo 1 > tracing_on + +echo "Take a snapshot again" +echo 1 > snapshot + +echo "Ensure keep tracing on" +test `cat tracing_on` -eq 1 + +exit 0 -- cgit v1.2.3 From 57ea2a34adf40f3a6e88409aafcf803b8945619a Mon Sep 17 00:00:00 2001 From: Artem Savkov Date: Wed, 25 Jul 2018 16:20:38 +0200 Subject: tracing/kprobes: Fix trace_probe flags on enable_trace_kprobe() failure If enable_trace_kprobe fails to enable the probe in enable_k(ret)probe it returns an error, but does not unset the tp flags it set previously. This results in a probe being considered enabled and failures like being unable to remove the probe through kprobe_events file since probes_open() expects every probe to be disabled. Link: http://lkml.kernel.org/r/20180725102826.8300-1-asavkov@redhat.com Link: http://lkml.kernel.org/r/20180725142038.4765-1-asavkov@redhat.com Cc: Ingo Molnar Cc: stable@vger.kernel.org Fixes: 41a7dd420c57 ("tracing/kprobes: Support ftrace_event_file base multibuffer") Acked-by: Masami Hiramatsu Reviewed-by: Josh Poimboeuf Signed-off-by: Artem Savkov Signed-off-by: Steven Rostedt (VMware) --- kernel/trace/trace_kprobe.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/kernel/trace/trace_kprobe.c b/kernel/trace/trace_kprobe.c index 21f718472942..27ace4513c43 100644 --- a/kernel/trace/trace_kprobe.c +++ b/kernel/trace/trace_kprobe.c @@ -400,11 +400,10 @@ static struct trace_kprobe *find_trace_kprobe(const char *event, static int enable_trace_kprobe(struct trace_kprobe *tk, struct trace_event_file *file) { + struct event_file_link *link; int ret = 0; if (file) { - struct event_file_link *link; - link = kmalloc(sizeof(*link), GFP_KERNEL); if (!link) { ret = -ENOMEM; @@ -424,6 +423,16 @@ enable_trace_kprobe(struct trace_kprobe *tk, struct trace_event_file *file) else ret = enable_kprobe(&tk->rp.kp); } + + if (ret) { + if (file) { + list_del_rcu(&link->list); + kfree(link); + tk->tp.flags &= ~TP_FLAG_TRACE; + } else { + tk->tp.flags &= ~TP_FLAG_PROFILE; + } + } out: return ret; } -- cgit v1.2.3 From d77a760842751eb620a7e74f74e5a5ad6b3d6cef Mon Sep 17 00:00:00 2001 From: Bard Liao Date: Fri, 20 Jul 2018 09:48:20 +0800 Subject: ASoC: rt5631: add Volume to the name of volume control add Volume to the name of volume control. Signed-off-by: Bard Liao Signed-off-by: Mark Brown --- sound/soc/codecs/rt5631.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/rt5631.c b/sound/soc/codecs/rt5631.c index cf6dce69eb2a..e52e4670cf65 100644 --- a/sound/soc/codecs/rt5631.c +++ b/sound/soc/codecs/rt5631.c @@ -229,10 +229,10 @@ static SOC_ENUM_SINGLE_DECL(rt5631_spk_ratio_enum, RT5631_GEN_PUR_CTRL_REG, static const struct snd_kcontrol_new rt5631_snd_controls[] = { /* MIC */ SOC_ENUM("MIC1 Mode Control", rt5631_mic1_mode_enum), - SOC_SINGLE_TLV("MIC1 Boost", RT5631_MIC_CTRL_2, + SOC_SINGLE_TLV("MIC1 Boost Volume", RT5631_MIC_CTRL_2, RT5631_MIC1_BOOST_SHIFT, 8, 0, mic_bst_tlv), SOC_ENUM("MIC2 Mode Control", rt5631_mic2_mode_enum), - SOC_SINGLE_TLV("MIC2 Boost", RT5631_MIC_CTRL_2, + SOC_SINGLE_TLV("MIC2 Boost Volume", RT5631_MIC_CTRL_2, RT5631_MIC2_BOOST_SHIFT, 8, 0, mic_bst_tlv), /* MONO IN */ SOC_ENUM("MONOIN Mode Control", rt5631_monoin_mode_enum), -- cgit v1.2.3 From 92beb0a26975c6459794d885d27f48357c1aefd0 Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Tue, 24 Jul 2018 16:12:44 -0500 Subject: ASoC: Intel: Haswell: fix endianness handling Make all Sparse warnings go away by using le16/32_to_cpu. Signed-off-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- sound/soc/intel/haswell/sst-haswell-dsp.c | 53 +++++++++++++++++-------------- 1 file changed, 29 insertions(+), 24 deletions(-) diff --git a/sound/soc/intel/haswell/sst-haswell-dsp.c b/sound/soc/intel/haswell/sst-haswell-dsp.c index b2bec36d074c..a28220e67cdf 100644 --- a/sound/soc/intel/haswell/sst-haswell-dsp.c +++ b/sound/soc/intel/haswell/sst-haswell-dsp.c @@ -93,29 +93,31 @@ static int hsw_parse_module(struct sst_dsp *dsp, struct sst_fw *fw, struct sst_module_template template; int count, ret; void __iomem *ram; + int type = le16_to_cpu(module->type); + int entry_point = le32_to_cpu(module->entry_point); /* TODO: allowed module types need to be configurable */ - if (module->type != SST_HSW_MODULE_BASE_FW - && module->type != SST_HSW_MODULE_PCM_SYSTEM - && module->type != SST_HSW_MODULE_PCM - && module->type != SST_HSW_MODULE_PCM_REFERENCE - && module->type != SST_HSW_MODULE_PCM_CAPTURE - && module->type != SST_HSW_MODULE_WAVES - && module->type != SST_HSW_MODULE_LPAL) + if (type != SST_HSW_MODULE_BASE_FW && + type != SST_HSW_MODULE_PCM_SYSTEM && + type != SST_HSW_MODULE_PCM && + type != SST_HSW_MODULE_PCM_REFERENCE && + type != SST_HSW_MODULE_PCM_CAPTURE && + type != SST_HSW_MODULE_WAVES && + type != SST_HSW_MODULE_LPAL) return 0; dev_dbg(dsp->dev, "new module sign 0x%s size 0x%x blocks 0x%x type 0x%x\n", module->signature, module->mod_size, - module->blocks, module->type); - dev_dbg(dsp->dev, " entrypoint 0x%x\n", module->entry_point); + module->blocks, type); + dev_dbg(dsp->dev, " entrypoint 0x%x\n", entry_point); dev_dbg(dsp->dev, " persistent 0x%x scratch 0x%x\n", module->info.persistent_size, module->info.scratch_size); memset(&template, 0, sizeof(template)); - template.id = module->type; - template.entry = module->entry_point - 4; - template.persistent_size = module->info.persistent_size; - template.scratch_size = module->info.scratch_size; + template.id = type; + template.entry = entry_point - 4; + template.persistent_size = le32_to_cpu(module->info.persistent_size); + template.scratch_size = le32_to_cpu(module->info.scratch_size); mod = sst_module_new(fw, &template, NULL); if (mod == NULL) @@ -123,26 +125,26 @@ static int hsw_parse_module(struct sst_dsp *dsp, struct sst_fw *fw, block = (void *)module + sizeof(*module); - for (count = 0; count < module->blocks; count++) { + for (count = 0; count < le32_to_cpu(module->blocks); count++) { - if (block->size <= 0) { + if (le32_to_cpu(block->size) <= 0) { dev_err(dsp->dev, "error: block %d size invalid\n", count); sst_module_free(mod); return -EINVAL; } - switch (block->type) { + switch (le32_to_cpu(block->type)) { case SST_HSW_IRAM: ram = dsp->addr.lpe; - mod->offset = - block->ram_offset + dsp->addr.iram_offset; + mod->offset = le32_to_cpu(block->ram_offset) + + dsp->addr.iram_offset; mod->type = SST_MEM_IRAM; break; case SST_HSW_DRAM: case SST_HSW_REGS: ram = dsp->addr.lpe; - mod->offset = block->ram_offset; + mod->offset = le32_to_cpu(block->ram_offset); mod->type = SST_MEM_DRAM; break; default: @@ -152,7 +154,7 @@ static int hsw_parse_module(struct sst_dsp *dsp, struct sst_fw *fw, return -EINVAL; } - mod->size = block->size; + mod->size = le32_to_cpu(block->size); mod->data = (void *)block + sizeof(*block); mod->data_offset = mod->data - fw->dma_buf; @@ -169,7 +171,8 @@ static int hsw_parse_module(struct sst_dsp *dsp, struct sst_fw *fw, return ret; } - block = (void *)block + sizeof(*block) + block->size; + block = (void *)block + sizeof(*block) + + le32_to_cpu(block->size); } mod->state = SST_MODULE_STATE_LOADED; @@ -188,7 +191,8 @@ static int hsw_parse_fw_image(struct sst_fw *sst_fw) /* verify FW */ if ((strncmp(header->signature, SST_HSW_FW_SIGN, 4) != 0) || - (sst_fw->size != header->file_size + sizeof(*header))) { + (sst_fw->size != + le32_to_cpu(header->file_size) + sizeof(*header))) { dev_err(dsp->dev, "error: invalid fw sign/filesize mismatch\n"); return -EINVAL; } @@ -199,7 +203,7 @@ static int hsw_parse_fw_image(struct sst_fw *sst_fw) /* parse each module */ module = (void *)sst_fw->dma_buf + sizeof(*header); - for (count = 0; count < header->modules; count++) { + for (count = 0; count < le32_to_cpu(header->modules); count++) { /* module */ ret = hsw_parse_module(dsp, sst_fw, module); @@ -207,7 +211,8 @@ static int hsw_parse_fw_image(struct sst_fw *sst_fw) dev_err(dsp->dev, "error: invalid module %d\n", count); return ret; } - module = (void *)module + sizeof(*module) + module->mod_size; + module = (void *)module + sizeof(*module) + + le32_to_cpu(module->mod_size); } return 0; -- cgit v1.2.3 From 86efd35ec1e34094914494dacb83077e5df2d1b8 Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Tue, 24 Jul 2018 16:12:45 -0500 Subject: ASoC: Intel: Skylake: BDL definitions should be __le32 Make sure definitions are consistent with usage. Detected with Sparse. Signed-off-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl-sst-cldma.c | 8 ++++---- sound/soc/intel/skylake/skl-sst-cldma.h | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/sound/soc/intel/skylake/skl-sst-cldma.c b/sound/soc/intel/skylake/skl-sst-cldma.c index d2b1d60fec02..5bc0d38da7e3 100644 --- a/sound/soc/intel/skylake/skl-sst-cldma.c +++ b/sound/soc/intel/skylake/skl-sst-cldma.c @@ -83,9 +83,9 @@ static void skl_cldma_stream_clear(struct sst_dsp *ctx) /* Code loader helper APIs */ static void skl_cldma_setup_bdle(struct sst_dsp *ctx, struct snd_dma_buffer *dmab_data, - u32 **bdlp, int size, int with_ioc) + __le32 **bdlp, int size, int with_ioc) { - u32 *bdl = *bdlp; + __le32 *bdl = *bdlp; ctx->cl_dev.frags = 0; while (size > 0) { @@ -330,7 +330,7 @@ void skl_cldma_process_intr(struct sst_dsp *ctx) int skl_cldma_prepare(struct sst_dsp *ctx) { int ret; - u32 *bdl; + __le32 *bdl; ctx->cl_dev.bufsize = SKL_MAX_BUFFER_SIZE; @@ -359,7 +359,7 @@ int skl_cldma_prepare(struct sst_dsp *ctx) ctx->dsp_ops.free_dma_buf(ctx->dev, &ctx->cl_dev.dmab_data); return ret; } - bdl = (u32 *)ctx->cl_dev.dmab_bdl.area; + bdl = (__le32 *)ctx->cl_dev.dmab_bdl.area; /* Allocate BDLs */ ctx->cl_dev.ops.cl_setup_bdle(ctx, &ctx->cl_dev.dmab_data, diff --git a/sound/soc/intel/skylake/skl-sst-cldma.h b/sound/soc/intel/skylake/skl-sst-cldma.h index 5b730a1a0ae4..ec736921a083 100644 --- a/sound/soc/intel/skylake/skl-sst-cldma.h +++ b/sound/soc/intel/skylake/skl-sst-cldma.h @@ -203,7 +203,7 @@ struct sst_dsp; struct skl_cl_dev_ops { void (*cl_setup_bdle)(struct sst_dsp *ctx, struct snd_dma_buffer *dmab_data, - u32 **bdlp, int size, int with_ioc); + __le32 **bdlp, int size, int with_ioc); void (*cl_setup_controller)(struct sst_dsp *ctx, struct snd_dma_buffer *dmab_bdl, unsigned int max_size, u32 page_count); -- cgit v1.2.3 From ef3cb7423358ff0cadacb76f26e3e1f4da8be4ce Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Tue, 24 Jul 2018 16:12:46 -0500 Subject: ASoC: Intel: common: make sst_dma functions static sst_dma_new and sst_dma_free are not used in any other file and don't have a prototype. Move to static functions and remove EXPORT_SYMBOL_GPL statement. Reported by sparse warnings. Signed-off-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- sound/soc/intel/common/sst-firmware.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/sound/soc/intel/common/sst-firmware.c b/sound/soc/intel/common/sst-firmware.c index 657afc02f1c4..11041aedea31 100644 --- a/sound/soc/intel/common/sst-firmware.c +++ b/sound/soc/intel/common/sst-firmware.c @@ -270,7 +270,7 @@ void sst_dsp_dma_put_channel(struct sst_dsp *dsp) } EXPORT_SYMBOL_GPL(sst_dsp_dma_put_channel); -int sst_dma_new(struct sst_dsp *sst) +static int sst_dma_new(struct sst_dsp *sst) { struct sst_pdata *sst_pdata = sst->pdata; struct sst_dma *dma; @@ -320,9 +320,8 @@ err_dma_dev: devm_kfree(sst->dev, dma); return ret; } -EXPORT_SYMBOL(sst_dma_new); -void sst_dma_free(struct sst_dma *dma) +static void sst_dma_free(struct sst_dma *dma) { if (dma == NULL) @@ -335,7 +334,6 @@ void sst_dma_free(struct sst_dma *dma) dw_remove(dma->chip); } -EXPORT_SYMBOL(sst_dma_free); /* create new generic firmware object */ struct sst_fw *sst_fw_new(struct sst_dsp *dsp, -- cgit v1.2.3 From ce1cfe295abaa7436f9049bcb2562c843089abfc Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Tue, 24 Jul 2018 16:12:47 -0500 Subject: ASoC: Intel: Atom: simplify iomem address and casts Simplify code and add relevant casts to make Sparse warnings go away Signed-off-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- sound/soc/intel/atom/sst/sst_drv_interface.c | 29 ++++++++++++++-------------- 1 file changed, 15 insertions(+), 14 deletions(-) diff --git a/sound/soc/intel/atom/sst/sst_drv_interface.c b/sound/soc/intel/atom/sst/sst_drv_interface.c index 6a8b253c58d2..5455d6e0ab53 100644 --- a/sound/soc/intel/atom/sst/sst_drv_interface.c +++ b/sound/soc/intel/atom/sst/sst_drv_interface.c @@ -266,17 +266,15 @@ static int sst_cdev_ack(struct device *dev, unsigned int str_id, stream->cumm_bytes += bytes; dev_dbg(dev, "bytes copied %d inc by %ld\n", stream->cumm_bytes, bytes); - memcpy_fromio(&fw_tstamp, - ((void *)(ctx->mailbox + ctx->tstamp) - +(str_id * sizeof(fw_tstamp))), - sizeof(fw_tstamp)); + addr = ((void __iomem *)(ctx->mailbox + ctx->tstamp)) + + (str_id * sizeof(fw_tstamp)); + + memcpy_fromio(&fw_tstamp, addr, sizeof(fw_tstamp)); fw_tstamp.bytes_copied = stream->cumm_bytes; dev_dbg(dev, "bytes sent to fw %llu inc by %ld\n", fw_tstamp.bytes_copied, bytes); - addr = ((void *)(ctx->mailbox + ctx->tstamp)) + - (str_id * sizeof(fw_tstamp)); offset = offsetof(struct snd_sst_tstamp, bytes_copied); sst_shim_write(addr, offset, fw_tstamp.bytes_copied); return 0; @@ -360,11 +358,12 @@ static int sst_cdev_tstamp(struct device *dev, unsigned int str_id, struct snd_sst_tstamp fw_tstamp = {0,}; struct stream_info *stream; struct intel_sst_drv *ctx = dev_get_drvdata(dev); + void __iomem *addr; + + addr = (void __iomem *)(ctx->mailbox + ctx->tstamp) + + (str_id * sizeof(fw_tstamp)); - memcpy_fromio(&fw_tstamp, - ((void *)(ctx->mailbox + ctx->tstamp) - +(str_id * sizeof(fw_tstamp))), - sizeof(fw_tstamp)); + memcpy_fromio(&fw_tstamp, addr, sizeof(fw_tstamp)); stream = get_stream_info(ctx, str_id); if (!stream) @@ -530,6 +529,7 @@ static int sst_read_timestamp(struct device *dev, struct pcm_stream_info *info) struct snd_sst_tstamp fw_tstamp; unsigned int str_id; struct intel_sst_drv *ctx = dev_get_drvdata(dev); + void __iomem *addr; str_id = info->str_id; stream = get_stream_info(ctx, str_id); @@ -540,10 +540,11 @@ static int sst_read_timestamp(struct device *dev, struct pcm_stream_info *info) return -EINVAL; substream = stream->pcm_substream; - memcpy_fromio(&fw_tstamp, - ((void *)(ctx->mailbox + ctx->tstamp) - + (str_id * sizeof(fw_tstamp))), - sizeof(fw_tstamp)); + addr = (void __iomem *)(ctx->mailbox + ctx->tstamp) + + (str_id * sizeof(fw_tstamp)); + + memcpy_fromio(&fw_tstamp, addr, sizeof(fw_tstamp)); + return sst_calc_tstamp(ctx, info, substream, &fw_tstamp); } -- cgit v1.2.3 From 9a0daaab31e9e39047ced79409313c34dae4635a Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Tue, 24 Jul 2018 16:12:48 -0500 Subject: ASoC: Intel: Atom: fix inversion between __iowrite32 and __ioread32 This looks like a copy/paste issue, but clearly there is an inversion that is obvious when checking the arguments. Detected with Sparse - now that we have fewer warnings this one was easy to find. Signed-off-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- sound/soc/intel/atom/sst/sst_loader.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/intel/atom/sst/sst_loader.c b/sound/soc/intel/atom/sst/sst_loader.c index a686eef2cf7f..27413ebae956 100644 --- a/sound/soc/intel/atom/sst/sst_loader.c +++ b/sound/soc/intel/atom/sst/sst_loader.c @@ -44,15 +44,15 @@ void memcpy32_toio(void __iomem *dst, const void *src, int count) /* __iowrite32_copy uses 32-bit count values so divide by 4 for * right count in words */ - __iowrite32_copy(dst, src, count/4); + __iowrite32_copy(dst, src, count / 4); } void memcpy32_fromio(void *dst, const void __iomem *src, int count) { - /* __iowrite32_copy uses 32-bit count values so divide by 4 for + /* __ioread32_copy uses 32-bit count values so divide by 4 for * right count in words */ - __iowrite32_copy(dst, src, count/4); + __ioread32_copy(dst, src, count / 4); } /** -- cgit v1.2.3 From fe65324e3f5205072a2d55ac9c63ec77155fa528 Mon Sep 17 00:00:00 2001 From: Rakesh Ughreja Date: Tue, 24 Jul 2018 19:50:48 -0500 Subject: ASoC: Intel: Skylake: fix widget handling include DAPM Mux and output widgets into the list. Signed-off-by: Rakesh Ughreja Signed-off-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl-topology.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/soc/intel/skylake/skl-topology.c b/sound/soc/intel/skylake/skl-topology.c index 647e52aecdc3..9845d853644c 100644 --- a/sound/soc/intel/skylake/skl-topology.c +++ b/sound/soc/intel/skylake/skl-topology.c @@ -108,6 +108,9 @@ static int is_skl_dsp_widget_type(struct snd_soc_dapm_widget *w, case snd_soc_dapm_aif_out: case snd_soc_dapm_dai_out: case snd_soc_dapm_switch: + case snd_soc_dapm_output: + case snd_soc_dapm_mux: + return false; default: return true; -- cgit v1.2.3 From 603ba2dfb338b307aebe95fe344c479a59b3a175 Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Tue, 24 Jul 2018 15:32:15 +0200 Subject: drm/atomic: Check old_plane_state->crtc in drm_atomic_helper_async_check() Async plane update is supposed to work only when updating the FB or FB position of an already enabled plane. That does not apply to requests where the plane was previously disabled or assigned to a different CTRC. Check old_plane_state->crtc value to make sure async plane update is allowed. Fixes: fef9df8b5945 ("drm/atomic: initial support for asynchronous plane update") Cc: Signed-off-by: Boris Brezillon Reviewed-by: Eric Anholt Link: https://patchwork.freedesktop.org/patch/msgid/20180724133215.31917-1-boris.brezillon@bootlin.com --- drivers/gpu/drm/drm_atomic_helper.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c index 130da5195f3b..ff858b890045 100644 --- a/drivers/gpu/drm/drm_atomic_helper.c +++ b/drivers/gpu/drm/drm_atomic_helper.c @@ -1527,7 +1527,8 @@ int drm_atomic_helper_async_check(struct drm_device *dev, if (n_planes != 1) return -EINVAL; - if (!new_plane_state->crtc) + if (!new_plane_state->crtc || + old_plane_state->crtc != new_plane_state->crtc) return -EINVAL; funcs = plane->helper_private; -- cgit v1.2.3 From de2d8db395c32d121d02871819444b631f73e0b6 Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Tue, 24 Jul 2018 15:33:00 +0200 Subject: drm/atomic: Initialize variables in drm_atomic_helper_async_check() to make gcc happy drm_atomic_helper_async_check() declares the plane, old_plane_state and new_plane_state variables to iterate over all planes of the atomic state and make sure only one plane is enabled. Unfortunately gcc is not smart enough to figure out that the check on n_planes is enough to guarantee that plane, new_plane_state and old_plane_state are initialized. Explicitly initialize those variables to NULL to make gcc happy. Fixes: fef9df8b5945 ("drm/atomic: initial support for asynchronous plane update") Cc: Signed-off-by: Boris Brezillon Reviewed-by: Sean Paul Link: https://patchwork.freedesktop.org/patch/msgid/20180724133300.32023-1-boris.brezillon@bootlin.com --- drivers/gpu/drm/drm_atomic_helper.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c index ff858b890045..81e32199d3ef 100644 --- a/drivers/gpu/drm/drm_atomic_helper.c +++ b/drivers/gpu/drm/drm_atomic_helper.c @@ -1510,8 +1510,9 @@ int drm_atomic_helper_async_check(struct drm_device *dev, { struct drm_crtc *crtc; struct drm_crtc_state *crtc_state; - struct drm_plane *plane; - struct drm_plane_state *old_plane_state, *new_plane_state; + struct drm_plane *plane = NULL; + struct drm_plane_state *old_plane_state = NULL; + struct drm_plane_state *new_plane_state = NULL; const struct drm_plane_helper_funcs *funcs; int i, n_planes = 0; -- cgit v1.2.3 From a6a00918d4ad8718c3ccde38c02cec17f116b2fd Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Tue, 24 Jul 2018 15:36:01 +0200 Subject: drm/vc4: Reset ->{x, y}_scaling[1] when dealing with uniplanar formats This is needed to ensure ->is_unity is correct when the plane was previously configured to output a multi-planar format with scaling enabled, and is then being reconfigured to output a uniplanar format. Fixes: fc04023fafec ("drm/vc4: Add support for YUV planes.") Cc: Signed-off-by: Boris Brezillon Reviewed-by: Eric Anholt Link: https://patchwork.freedesktop.org/patch/msgid/20180724133601.32114-1-boris.brezillon@bootlin.com --- drivers/gpu/drm/vc4/vc4_plane.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/vc4/vc4_plane.c b/drivers/gpu/drm/vc4/vc4_plane.c index 1d34619eb3fe..a951ec75d01f 100644 --- a/drivers/gpu/drm/vc4/vc4_plane.c +++ b/drivers/gpu/drm/vc4/vc4_plane.c @@ -320,6 +320,9 @@ static int vc4_plane_setup_clipping_and_scaling(struct drm_plane_state *state) vc4_state->x_scaling[0] = VC4_SCALING_TPZ; if (vc4_state->y_scaling[0] == VC4_SCALING_NONE) vc4_state->y_scaling[0] = VC4_SCALING_TPZ; + } else { + vc4_state->x_scaling[1] = VC4_SCALING_NONE; + vc4_state->y_scaling[1] = VC4_SCALING_NONE; } vc4_state->is_unity = (vc4_state->x_scaling[0] == VC4_SCALING_NONE && -- cgit v1.2.3 From ecbc42ca5d665e9238a4cdb595024d2e6cf87f2d Mon Sep 17 00:00:00 2001 From: Toshiaki Makita Date: Mon, 23 Jul 2018 23:36:04 +0900 Subject: virtio_net: Fix incosistent received bytes counter When received packets are dropped in virtio_net driver, received packets counter is incremented but bytes counter is not. As a result, for instance if we drop all packets by XDP, only received is counted and bytes stays 0, which looks inconsistent. IMHO received packets/bytes should be counted if packets are produced by the hypervisor, like what common NICs on physical machines are doing. So fix the bytes counter. Signed-off-by: Toshiaki Makita Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 41 +++++++++++++++++++++++------------------ 1 file changed, 23 insertions(+), 18 deletions(-) diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 53085c63277b..2b6ec927809e 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -586,7 +586,8 @@ static struct sk_buff *receive_small(struct net_device *dev, struct receive_queue *rq, void *buf, void *ctx, unsigned int len, - unsigned int *xdp_xmit) + unsigned int *xdp_xmit, + unsigned int *rbytes) { struct sk_buff *skb; struct bpf_prog *xdp_prog; @@ -601,6 +602,7 @@ static struct sk_buff *receive_small(struct net_device *dev, int err; len -= vi->hdr_len; + *rbytes += len; rcu_read_lock(); xdp_prog = rcu_dereference(rq->xdp_prog); @@ -705,11 +707,13 @@ static struct sk_buff *receive_big(struct net_device *dev, struct virtnet_info *vi, struct receive_queue *rq, void *buf, - unsigned int len) + unsigned int len, + unsigned int *rbytes) { struct page *page = buf; struct sk_buff *skb = page_to_skb(vi, rq, page, 0, len, PAGE_SIZE); + *rbytes += len - vi->hdr_len; if (unlikely(!skb)) goto err; @@ -727,7 +731,8 @@ static struct sk_buff *receive_mergeable(struct net_device *dev, void *buf, void *ctx, unsigned int len, - unsigned int *xdp_xmit) + unsigned int *xdp_xmit, + unsigned int *rbytes) { struct virtio_net_hdr_mrg_rxbuf *hdr = buf; u16 num_buf = virtio16_to_cpu(vi->vdev, hdr->num_buffers); @@ -740,6 +745,7 @@ static struct sk_buff *receive_mergeable(struct net_device *dev, int err; head_skb = NULL; + *rbytes += len - vi->hdr_len; rcu_read_lock(); xdp_prog = rcu_dereference(rq->xdp_prog); @@ -877,6 +883,7 @@ static struct sk_buff *receive_mergeable(struct net_device *dev, goto err_buf; } + *rbytes += len; page = virt_to_head_page(buf); truesize = mergeable_ctx_to_truesize(ctx); @@ -932,6 +939,7 @@ err_skb: dev->stats.rx_length_errors++; break; } + *rbytes += len; page = virt_to_head_page(buf); put_page(page); } @@ -942,14 +950,13 @@ xdp_xmit: return NULL; } -static int receive_buf(struct virtnet_info *vi, struct receive_queue *rq, - void *buf, unsigned int len, void **ctx, - unsigned int *xdp_xmit) +static void receive_buf(struct virtnet_info *vi, struct receive_queue *rq, + void *buf, unsigned int len, void **ctx, + unsigned int *xdp_xmit, unsigned int *rbytes) { struct net_device *dev = vi->dev; struct sk_buff *skb; struct virtio_net_hdr_mrg_rxbuf *hdr; - int ret; if (unlikely(len < vi->hdr_len + ETH_HLEN)) { pr_debug("%s: short packet %i\n", dev->name, len); @@ -961,23 +968,22 @@ static int receive_buf(struct virtnet_info *vi, struct receive_queue *rq, } else { put_page(virt_to_head_page(buf)); } - return 0; + return; } if (vi->mergeable_rx_bufs) - skb = receive_mergeable(dev, vi, rq, buf, ctx, len, xdp_xmit); + skb = receive_mergeable(dev, vi, rq, buf, ctx, len, xdp_xmit, + rbytes); else if (vi->big_packets) - skb = receive_big(dev, vi, rq, buf, len); + skb = receive_big(dev, vi, rq, buf, len, rbytes); else - skb = receive_small(dev, vi, rq, buf, ctx, len, xdp_xmit); + skb = receive_small(dev, vi, rq, buf, ctx, len, xdp_xmit, rbytes); if (unlikely(!skb)) - return 0; + return; hdr = skb_vnet_hdr(skb); - ret = skb->len; - if (hdr->hdr.flags & VIRTIO_NET_HDR_F_DATA_VALID) skb->ip_summed = CHECKSUM_UNNECESSARY; @@ -994,12 +1000,11 @@ static int receive_buf(struct virtnet_info *vi, struct receive_queue *rq, ntohs(skb->protocol), skb->len, skb->pkt_type); napi_gro_receive(&rq->napi, skb); - return ret; + return; frame_err: dev->stats.rx_frame_errors++; dev_kfree_skb(skb); - return 0; } /* Unlike mergeable buffers, all buffers are allocated to the @@ -1249,13 +1254,13 @@ static int virtnet_receive(struct receive_queue *rq, int budget, while (received < budget && (buf = virtqueue_get_buf_ctx(rq->vq, &len, &ctx))) { - bytes += receive_buf(vi, rq, buf, len, ctx, xdp_xmit); + receive_buf(vi, rq, buf, len, ctx, xdp_xmit, &bytes); received++; } } else { while (received < budget && (buf = virtqueue_get_buf(rq->vq, &len)) != NULL) { - bytes += receive_buf(vi, rq, buf, len, NULL, xdp_xmit); + receive_buf(vi, rq, buf, len, NULL, xdp_xmit, &bytes); received++; } } -- cgit v1.2.3 From 7856e8616273098dc6c09a6e084afd98a283ff0d Mon Sep 17 00:00:00 2001 From: dann frazier Date: Mon, 23 Jul 2018 16:55:40 -0600 Subject: hinic: Link the logical network device to the pci device in sysfs Otherwise interfaces get exposed under /sys/devices/virtual, which doesn't give udev the context it needs for PCI-based predictable interface names. Signed-off-by: dann frazier Signed-off-by: David S. Miller --- drivers/net/ethernet/huawei/hinic/hinic_main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/huawei/hinic/hinic_main.c b/drivers/net/ethernet/huawei/hinic/hinic_main.c index 5b122728dcb4..09e9da10b786 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_main.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_main.c @@ -983,6 +983,7 @@ static int nic_dev_init(struct pci_dev *pdev) hinic_hwdev_cb_register(nic_dev->hwdev, HINIC_MGMT_MSG_CMD_LINK_STATUS, nic_dev, link_status_event_handler); + SET_NETDEV_DEV(netdev, &pdev->dev); err = register_netdev(netdev); if (err) { dev_err(&pdev->dev, "Failed to register netdev\n"); -- cgit v1.2.3 From 0ca9488193e61ec5f31a631d8147f74525629e8a Mon Sep 17 00:00:00 2001 From: Clint Taylor Date: Tue, 10 Jul 2018 13:02:05 -0700 Subject: drm/i915/glk: Add Quirk for GLK NUC HDMI port issues. On GLK NUC platforms the HDMI retiming buffer needs additional disabled time to correctly sync to a faster incoming signal. When measured on a scope the highspeed lines of the HDMI clock turn off for ~400uS during a normal resolution change. The HDMI retimer on the GLK NUC appears to require at least a full frame of quiet time before a new faster clock can be correctly sync'd. Wait 100ms due to msleep inaccuracies while waiting for a completed frame. Add a quirk to the driver for GLK boards that use ITE66317 HDMI retimers. V2: Add more devices to the quirk list V3: Delay increased to 100ms, check to confirm crtc type is HDMI. V4: crtc type check extended to include _DDI and whitespace fixes v5: Fix white spaces, remove the macro for delay. Revert the crtc type check introduced in v4. Cc: Imre Deak Cc: # v4.14+ Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105887 Signed-off-by: Clint Taylor Tested-by: Daniel Scheller Signed-off-by: Radhakrishna Sripada Signed-off-by: Imre Deak Reviewed-by: Imre Deak Link: https://patchwork.freedesktop.org/patch/msgid/20180710200205.1478-1-radhakrishna.sripada@intel.com (cherry picked from commit 90c3e2198777aaa355b6994a31a79c636c8d4306) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/intel_ddi.c | 13 +++++++++++-- drivers/gpu/drm/i915/intel_display.c | 21 ++++++++++++++++++++- drivers/gpu/drm/i915/intel_drv.h | 3 +-- 4 files changed, 33 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 52f3b91d14fd..71e1aa54f774 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -652,6 +652,7 @@ enum intel_sbi_destination { #define QUIRK_BACKLIGHT_PRESENT (1<<3) #define QUIRK_PIN_SWIZZLED_PAGES (1<<5) #define QUIRK_INCREASE_T12_DELAY (1<<6) +#define QUIRK_INCREASE_DDI_DISABLED_TIME (1<<7) struct intel_fbdev; struct intel_fbc_work; diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c index f4a8598a2d39..fed26d6e4e27 100644 --- a/drivers/gpu/drm/i915/intel_ddi.c +++ b/drivers/gpu/drm/i915/intel_ddi.c @@ -1782,15 +1782,24 @@ void intel_ddi_enable_transcoder_func(const struct intel_crtc_state *crtc_state) I915_WRITE(TRANS_DDI_FUNC_CTL(cpu_transcoder), temp); } -void intel_ddi_disable_transcoder_func(struct drm_i915_private *dev_priv, - enum transcoder cpu_transcoder) +void intel_ddi_disable_transcoder_func(const struct intel_crtc_state *crtc_state) { + struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc); + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); + enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; i915_reg_t reg = TRANS_DDI_FUNC_CTL(cpu_transcoder); uint32_t val = I915_READ(reg); val &= ~(TRANS_DDI_FUNC_ENABLE | TRANS_DDI_PORT_MASK | TRANS_DDI_DP_VC_PAYLOAD_ALLOC); val |= TRANS_DDI_PORT_NONE; I915_WRITE(reg, val); + + if (dev_priv->quirks & QUIRK_INCREASE_DDI_DISABLED_TIME && + intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) { + DRM_DEBUG_KMS("Quirk Increase DDI disabled time\n"); + /* Quirk time at 100ms for reliable operation */ + msleep(100); + } } int intel_ddi_toggle_hdcp_signalling(struct intel_encoder *intel_encoder, diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 2cc6faa1daa8..dec0d60921bf 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -5809,7 +5809,7 @@ static void haswell_crtc_disable(struct intel_crtc_state *old_crtc_state, intel_ddi_set_vc_payload_alloc(intel_crtc->config, false); if (!transcoder_is_dsi(cpu_transcoder)) - intel_ddi_disable_transcoder_func(dev_priv, cpu_transcoder); + intel_ddi_disable_transcoder_func(old_crtc_state); if (INTEL_GEN(dev_priv) >= 9) skylake_scaler_disable(intel_crtc); @@ -14646,6 +14646,18 @@ static void quirk_increase_t12_delay(struct drm_device *dev) DRM_INFO("Applying T12 delay quirk\n"); } +/* + * GeminiLake NUC HDMI outputs require additional off time + * this allows the onboard retimer to correctly sync to signal + */ +static void quirk_increase_ddi_disabled_time(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = to_i915(dev); + + dev_priv->quirks |= QUIRK_INCREASE_DDI_DISABLED_TIME; + DRM_INFO("Applying Increase DDI Disabled quirk\n"); +} + struct intel_quirk { int device; int subsystem_vendor; @@ -14732,6 +14744,13 @@ static struct intel_quirk intel_quirks[] = { /* Toshiba Satellite P50-C-18C */ { 0x191B, 0x1179, 0xF840, quirk_increase_t12_delay }, + + /* GeminiLake NUC */ + { 0x3185, 0x8086, 0x2072, quirk_increase_ddi_disabled_time }, + { 0x3184, 0x8086, 0x2072, quirk_increase_ddi_disabled_time }, + /* ASRock ITX*/ + { 0x3185, 0x1849, 0x2212, quirk_increase_ddi_disabled_time }, + { 0x3184, 0x1849, 0x2212, quirk_increase_ddi_disabled_time }, }; static void intel_init_quirks(struct drm_device *dev) diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 0361130500a6..b8eefbffc77d 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -1388,8 +1388,7 @@ void hsw_fdi_link_train(struct intel_crtc *crtc, void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port); bool intel_ddi_get_hw_state(struct intel_encoder *encoder, enum pipe *pipe); void intel_ddi_enable_transcoder_func(const struct intel_crtc_state *crtc_state); -void intel_ddi_disable_transcoder_func(struct drm_i915_private *dev_priv, - enum transcoder cpu_transcoder); +void intel_ddi_disable_transcoder_func(const struct intel_crtc_state *crtc_state); void intel_ddi_enable_pipe_clock(const struct intel_crtc_state *crtc_state); void intel_ddi_disable_pipe_clock(const struct intel_crtc_state *crtc_state); struct intel_encoder * -- cgit v1.2.3 From 9aee40006190a3cda9a4d2dbae71e92617c8c362 Mon Sep 17 00:00:00 2001 From: Lawrence Brakmo Date: Mon, 23 Jul 2018 17:49:39 -0700 Subject: tcp: ack immediately when a cwr packet arrives We observed high 99 and 99.9% latencies when doing RPCs with DCTCP. The problem is triggered when the last packet of a request arrives CE marked. The reply will carry the ECE mark causing TCP to shrink its cwnd to 1 (because there are no packets in flight). When the 1st packet of the next request arrives, the ACK was sometimes delayed even though it is CWR marked, adding up to 40ms to the RPC latency. This patch insures that CWR marked data packets arriving will be acked immediately. Packetdrill script to reproduce the problem: 0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 0.000 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 0.000 setsockopt(3, SOL_TCP, TCP_CONGESTION, "dctcp", 5) = 0 0.000 bind(3, ..., ...) = 0 0.000 listen(3, 1) = 0 0.100 < [ect0] SEW 0:0(0) win 32792 0.100 > SE. 0:0(0) ack 1 0.110 < [ect0] . 1:1(0) ack 1 win 257 0.200 accept(3, ..., ...) = 4 0.200 < [ect0] . 1:1001(1000) ack 1 win 257 0.200 > [ect01] . 1:1(0) ack 1001 0.200 write(4, ..., 1) = 1 0.200 > [ect01] P. 1:2(1) ack 1001 0.200 < [ect0] . 1001:2001(1000) ack 2 win 257 0.200 write(4, ..., 1) = 1 0.200 > [ect01] P. 2:3(1) ack 2001 0.200 < [ect0] . 2001:3001(1000) ack 3 win 257 0.200 < [ect0] . 3001:4001(1000) ack 3 win 257 0.200 > [ect01] . 3:3(0) ack 4001 0.210 < [ce] P. 4001:4501(500) ack 3 win 257 +0.001 read(4, ..., 4500) = 4500 +0 write(4, ..., 1) = 1 +0 > [ect01] PE. 3:4(1) ack 4501 +0.010 < [ect0] W. 4501:5501(1000) ack 4 win 257 // Previously the ACK sequence below would be 4501, causing a long RTO +0.040~+0.045 > [ect01] . 4:4(0) ack 5501 // delayed ack +0.311 < [ect0] . 5501:6501(1000) ack 4 win 257 // More data +0 > [ect01] . 4:4(0) ack 6501 // now acks everything +0.500 < F. 9501:9501(0) ack 4 win 257 Modified based on comments by Neal Cardwell Signed-off-by: Lawrence Brakmo Acked-by: Neal Cardwell Acked-by: Yuchung Cheng Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/tcp_input.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 3bcd30a2ba06..f9dcb29be12d 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -246,8 +246,15 @@ static void tcp_ecn_queue_cwr(struct tcp_sock *tp) static void tcp_ecn_accept_cwr(struct tcp_sock *tp, const struct sk_buff *skb) { - if (tcp_hdr(skb)->cwr) + if (tcp_hdr(skb)->cwr) { tp->ecn_flags &= ~TCP_ECN_DEMAND_CWR; + + /* If the sender is telling us it has entered CWR, then its + * cwnd may be very low (even just 1 packet), so we should ACK + * immediately. + */ + tcp_enter_quickack_mode((struct sock *)tp, 2); + } } static void tcp_ecn_withdraw_cwr(struct tcp_sock *tp) -- cgit v1.2.3 From b87bac1012c483462e7776c7b7320b659dbb3295 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 25 Jul 2018 06:06:13 +0000 Subject: net: igmp: make function __ip_mc_inc_group() static Fixes the following sparse warnings: net/ipv4/igmp.c:1391:6: warning: symbol '__ip_mc_inc_group' was not declared. Should it be static? Fixes: 6e2059b53f98 ("ipv4/igmp: init group mode as INCLUDE when join source group") Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller --- net/ipv4/igmp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c index 28fef7d15959..75151be21413 100644 --- a/net/ipv4/igmp.c +++ b/net/ipv4/igmp.c @@ -1387,7 +1387,8 @@ static void ip_mc_hash_remove(struct in_device *in_dev, /* * A socket has joined a multicast group on device dev. */ -void __ip_mc_inc_group(struct in_device *in_dev, __be32 addr, unsigned int mode) +static void __ip_mc_inc_group(struct in_device *in_dev, __be32 addr, + unsigned int mode) { struct ip_mc_list *im; #ifdef CONFIG_IP_MULTICAST -- cgit v1.2.3 From 9e4e5b5c86661e767f3074bedbbf2ca59f8fbd18 Mon Sep 17 00:00:00 2001 From: Wang YanQing Date: Thu, 26 Jul 2018 00:46:11 +0800 Subject: bpf, x32: Fix regression caused by commit 24dea04767e6 Commit 24dea04767e6 ("bpf, x32: remove ld_abs/ld_ind") removed the 4 /* Extra space for skb_copy_bits buffer */ from _STACK_SIZE, but it didn't fix the concerned code in emit_prologue and emit_epilogue, and this error will bring very strange kernel runtime errors. This patch fixes it. Fixes: 24dea04767e6 ("bpf, x32: remove ld_abs/ld_ind") Reported-by: Meelis Roos Bisected-by: Meelis Roos Signed-off-by: Wang YanQing Signed-off-by: Daniel Borkmann --- arch/x86/net/bpf_jit_comp32.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/x86/net/bpf_jit_comp32.c b/arch/x86/net/bpf_jit_comp32.c index 55799873ebe5..8f6cc71e0848 100644 --- a/arch/x86/net/bpf_jit_comp32.c +++ b/arch/x86/net/bpf_jit_comp32.c @@ -1441,8 +1441,8 @@ static void emit_prologue(u8 **pprog, u32 stack_depth) /* sub esp,STACK_SIZE */ EMIT2_off32(0x81, 0xEC, STACK_SIZE); - /* sub ebp,SCRATCH_SIZE+4+12*/ - EMIT3(0x83, add_1reg(0xE8, IA32_EBP), SCRATCH_SIZE + 16); + /* sub ebp,SCRATCH_SIZE+12*/ + EMIT3(0x83, add_1reg(0xE8, IA32_EBP), SCRATCH_SIZE + 12); /* xor ebx,ebx */ EMIT2(0x31, add_2reg(0xC0, IA32_EBX, IA32_EBX)); @@ -1475,8 +1475,8 @@ static void emit_epilogue(u8 **pprog, u32 stack_depth) /* mov edx,dword ptr [ebp+off]*/ EMIT3(0x8B, add_2reg(0x40, IA32_EBP, IA32_EDX), STACK_VAR(r0[1])); - /* add ebp,SCRATCH_SIZE+4+12*/ - EMIT3(0x83, add_1reg(0xC0, IA32_EBP), SCRATCH_SIZE + 16); + /* add ebp,SCRATCH_SIZE+12*/ + EMIT3(0x83, add_1reg(0xC0, IA32_EBP), SCRATCH_SIZE + 12); /* mov ebx,dword ptr [ebp-12]*/ EMIT3(0x8B, add_2reg(0x40, IA32_EBP, IA32_EBX), -12); -- cgit v1.2.3 From d24458e43b103c7eb7b2fd57bcac392fd7750438 Mon Sep 17 00:00:00 2001 From: Björn Töpel Date: Mon, 23 Jul 2018 11:43:03 +0200 Subject: xsk: fix poll/POLLIN premature returns MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Polling for the ingress queues relies on reading the producer/consumer pointers of the Rx queue. Prior this commit, a cached consumer pointer could be used, instead of the actual consumer pointer and therefore report POLLIN prematurely. This patch makes sure that the non-cached consumer pointer is used instead. Reported-by: Qi Zhang Tested-by: Qi Zhang Fixes: c497176cb2e4 ("xsk: add Rx receive functions and poll support") Signed-off-by: Björn Töpel Signed-off-by: Daniel Borkmann --- net/xdp/xsk_queue.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/xdp/xsk_queue.h b/net/xdp/xsk_queue.h index 52ecaf770642..8a64b150be54 100644 --- a/net/xdp/xsk_queue.h +++ b/net/xdp/xsk_queue.h @@ -250,7 +250,7 @@ static inline bool xskq_full_desc(struct xsk_queue *q) static inline bool xskq_empty_desc(struct xsk_queue *q) { - return xskq_nb_free(q, q->prod_tail, 1) == q->nentries; + return xskq_nb_free(q, q->prod_tail, q->nentries) == q->nentries; } void xskq_set_umem(struct xsk_queue *q, struct xdp_umem_props *umem_props); -- cgit v1.2.3 From 15cc78644d0075e76d59476a4467e7143860f660 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (VMware)" Date: Wed, 25 Jul 2018 16:02:06 -0400 Subject: tracing: Fix possible double free in event_enable_trigger_func() There was a case that triggered a double free in event_trigger_callback() due to the called reg() function freeing the trigger_data and then it getting freed again by the error return by the caller. The solution there was to up the trigger_data ref count. Code inspection found that event_enable_trigger_func() has the same issue, but is not as easy to trigger (requires harder to trigger failures). It needs to be solved slightly different as it needs more to clean up when the reg() function fails. Link: http://lkml.kernel.org/r/20180725124008.7008e586@gandalf.local.home Cc: stable@vger.kernel.org Fixes: 7862ad1846e99 ("tracing: Add 'enable_event' and 'disable_event' event trigger commands") Reivewed-by: Masami Hiramatsu Signed-off-by: Steven Rostedt (VMware) --- kernel/trace/trace_events_trigger.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/kernel/trace/trace_events_trigger.c b/kernel/trace/trace_events_trigger.c index d18ec0e58be2..5dea177cef53 100644 --- a/kernel/trace/trace_events_trigger.c +++ b/kernel/trace/trace_events_trigger.c @@ -1420,6 +1420,9 @@ int event_enable_trigger_func(struct event_command *cmd_ops, goto out; } + /* Up the trigger_data count to make sure nothing frees it on failure */ + event_trigger_init(trigger_ops, trigger_data); + if (trigger) { number = strsep(&trigger, ":"); @@ -1470,6 +1473,7 @@ int event_enable_trigger_func(struct event_command *cmd_ops, goto out_disable; /* Just return zero, not the number of enabled functions */ ret = 0; + event_trigger_free(trigger_ops, trigger_data); out: return ret; @@ -1480,7 +1484,7 @@ int event_enable_trigger_func(struct event_command *cmd_ops, out_free: if (cmd_ops->set_filter) cmd_ops->set_filter(NULL, trigger_data, NULL); - kfree(trigger_data); + event_trigger_free(trigger_ops, trigger_data); kfree(enable_data); goto out; } -- cgit v1.2.3 From 2519c1bbe38d7acacc9aacba303ca6f97482ed53 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (VMware)" Date: Wed, 25 Jul 2018 22:28:56 -0400 Subject: tracing: Quiet gcc warning about maybe unused link variable Commit 57ea2a34adf4 ("tracing/kprobes: Fix trace_probe flags on enable_trace_kprobe() failure") added an if statement that depends on another if statement that gcc doesn't see will initialize the "link" variable and gives the warning: "warning: 'link' may be used uninitialized in this function" It is really a false positive, but to quiet the warning, and also to make sure that it never actually is used uninitialized, initialize the "link" variable to NULL and add an if (!WARN_ON_ONCE(!link)) where the compiler thinks it could be used uninitialized. Cc: stable@vger.kernel.org Fixes: 57ea2a34adf4 ("tracing/kprobes: Fix trace_probe flags on enable_trace_kprobe() failure") Reported-by: kbuild test robot Signed-off-by: Steven Rostedt (VMware) --- kernel/trace/trace_kprobe.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/kernel/trace/trace_kprobe.c b/kernel/trace/trace_kprobe.c index 27ace4513c43..6b71860f3998 100644 --- a/kernel/trace/trace_kprobe.c +++ b/kernel/trace/trace_kprobe.c @@ -400,7 +400,7 @@ static struct trace_kprobe *find_trace_kprobe(const char *event, static int enable_trace_kprobe(struct trace_kprobe *tk, struct trace_event_file *file) { - struct event_file_link *link; + struct event_file_link *link = NULL; int ret = 0; if (file) { @@ -426,7 +426,9 @@ enable_trace_kprobe(struct trace_kprobe *tk, struct trace_event_file *file) if (ret) { if (file) { - list_del_rcu(&link->list); + /* Notice the if is true on not WARN() */ + if (!WARN_ON_ONCE(!link)) + list_del_rcu(&link->list); kfree(link); tk->tp.flags &= ~TP_FLAG_TRACE; } else { -- cgit v1.2.3 From c259b4fb33ee6e7667bf1d34bf0803b7c5fdbdce Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Wed, 25 Jul 2018 15:39:27 -0700 Subject: netdevsim: don't leak devlink resources Devlink resources registered with devlink_resource_register() have to be unregistered. Fixes: 37923ed6b8ce ("netdevsim: Add simple FIB resource controller via devlink") Signed-off-by: Jakub Kicinski Reviewed-by: Quentin Monnet Signed-off-by: David S. Miller --- drivers/net/netdevsim/devlink.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/netdevsim/devlink.c b/drivers/net/netdevsim/devlink.c index ba663e5af168..5135fc371f01 100644 --- a/drivers/net/netdevsim/devlink.c +++ b/drivers/net/netdevsim/devlink.c @@ -207,6 +207,7 @@ void nsim_devlink_teardown(struct netdevsim *ns) struct net *net = nsim_to_net(ns); bool *reg_devlink = net_generic(net, nsim_devlink_id); + devlink_resources_unregister(ns->devlink, NULL); devlink_unregister(ns->devlink); devlink_free(ns->devlink); ns->devlink = NULL; -- cgit v1.2.3 From 942a656f1f228f06a37adad0e6c347773cfe7bd6 Mon Sep 17 00:00:00 2001 From: Arjun Vynipadath Date: Wed, 25 Jul 2018 19:39:52 +0530 Subject: cxgb4: Added missing break in ndo_udp_tunnel_{add/del} Break statements were missing for Geneve case in ndo_udp_tunnel_{add/del}, thereby raw mac matchall entries were not getting added. Fixes: c746fc0e8b2d("cxgb4: add geneve offload support for T6") Signed-off-by: Arjun Vynipadath Signed-off-by: Ganesh Goudar Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c index bc03c175a3cd..a8926e97935e 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c @@ -3072,6 +3072,7 @@ static void cxgb_del_udp_tunnel(struct net_device *netdev, adapter->geneve_port = 0; t4_write_reg(adapter, MPS_RX_GENEVE_TYPE_A, 0); + break; default: return; } @@ -3157,6 +3158,7 @@ static void cxgb_add_udp_tunnel(struct net_device *netdev, t4_write_reg(adapter, MPS_RX_GENEVE_TYPE_A, GENEVE_V(be16_to_cpu(ti->port)) | GENEVE_EN_F); + break; default: return; } -- cgit v1.2.3 From 92cab799bbc6fa1fca84bd1692285a5f926c17e9 Mon Sep 17 00:00:00 2001 From: Sean Young Date: Wed, 4 Jul 2018 10:57:58 -0400 Subject: media: bpf: ensure bpf program is freed on detach Currently we are leaking bpf programs when they are detached from the lirc device; the refcount never reaches zero. Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/bpf-lirc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/rc/bpf-lirc.c b/drivers/media/rc/bpf-lirc.c index 40826bba06b6..55400317ec53 100644 --- a/drivers/media/rc/bpf-lirc.c +++ b/drivers/media/rc/bpf-lirc.c @@ -174,6 +174,7 @@ static int lirc_bpf_detach(struct rc_dev *rcdev, struct bpf_prog *prog) rcu_assign_pointer(raw->progs, new_array); bpf_prog_array_free(old_array); + bpf_prog_put(prog); unlock: mutex_unlock(&ir_raw_handler_lock); return ret; -- cgit v1.2.3 From c183fec10ae6b3d1dfb77471d4158e576f6b43ae Mon Sep 17 00:00:00 2001 From: Akshu Agrawal Date: Wed, 25 Jul 2018 17:00:59 +0800 Subject: ASoC: AMD: Add a fix voltage regulator for DA7219 and ADAU7002 DA7219 for our platform need to be configured for 1.8V. Hence, we add a volatge regulator with supplies of 1.8V in the machine driver. Signed-off-by: Adam Thomson Signed-off-by: Akshu Agrawal Signed-off-by: Mark Brown --- sound/soc/amd/Kconfig | 1 + sound/soc/amd/acp-da7219-max98357a.c | 43 ++++++++++++++++++++++++++++++++++++ 2 files changed, 44 insertions(+) diff --git a/sound/soc/amd/Kconfig b/sound/soc/amd/Kconfig index 6cbf9cf4d1a4..58c1dcb4d255 100644 --- a/sound/soc/amd/Kconfig +++ b/sound/soc/amd/Kconfig @@ -8,6 +8,7 @@ config SND_SOC_AMD_CZ_DA7219MX98357_MACH select SND_SOC_DA7219 select SND_SOC_MAX98357A select SND_SOC_ADAU7002 + select REGULATOR depends on SND_SOC_AMD_ACP && I2C help This option enables machine driver for DA7219 and MAX9835. diff --git a/sound/soc/amd/acp-da7219-max98357a.c b/sound/soc/amd/acp-da7219-max98357a.c index f42606e5879e..cd3cf6e691a9 100644 --- a/sound/soc/amd/acp-da7219-max98357a.c +++ b/sound/soc/amd/acp-da7219-max98357a.c @@ -32,6 +32,8 @@ #include #include #include +#include +#include #include #include #include @@ -320,11 +322,52 @@ static struct snd_soc_card cz_card = { .num_controls = ARRAY_SIZE(cz_mc_controls), }; +static struct regulator_consumer_supply acp_da7219_supplies[] = { + REGULATOR_SUPPLY("VDD", "i2c-DLGS7219:00"), + REGULATOR_SUPPLY("VDDMIC", "i2c-DLGS7219:00"), + REGULATOR_SUPPLY("VDDIO", "i2c-DLGS7219:00"), + REGULATOR_SUPPLY("IOVDD", "ADAU7002:00"), +}; + +static struct regulator_init_data acp_da7219_data = { + .constraints = { + .always_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(acp_da7219_supplies), + .consumer_supplies = acp_da7219_supplies, +}; + +static struct regulator_config acp_da7219_cfg = { + .init_data = &acp_da7219_data, +}; + +static struct regulator_ops acp_da7219_ops = { +}; + +static struct regulator_desc acp_da7219_desc = { + .name = "reg-fixed-1.8V", + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .ops = &acp_da7219_ops, + .fixed_uV = 1800000, /* 1.8V */ + .n_voltages = 1, +}; + static int cz_probe(struct platform_device *pdev) { int ret; struct snd_soc_card *card; struct acp_platform_info *machine; + struct regulator_dev *rdev; + + acp_da7219_cfg.dev = &pdev->dev; + rdev = devm_regulator_register(&pdev->dev, &acp_da7219_desc, + &acp_da7219_cfg); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, "Failed to register regulator: %d\n", + ret); + return -EINVAL; + } machine = devm_kzalloc(&pdev->dev, sizeof(struct acp_platform_info), GFP_KERNEL); -- cgit v1.2.3 From 7699676081ded2e149e798f9205f1f089aa3a6bc Mon Sep 17 00:00:00 2001 From: Akshu Agrawal Date: Thu, 26 Jul 2018 14:04:08 +0800 Subject: ASoC: AMD: Fix build warning Fixes sound/soc/amd/acp-da7219-max98357a.c: In function 'cz_probe': sound/soc/amd/acp-da7219-max98357a.c:367:3: warning: 'ret' may be used uninitialized in this function [-Wmaybe-uninitialized] dev_err(&pdev->dev, "Failed to register regulator: %d\n", ret); Reported-by: Stephen Rothwell Signed-off-by: Akshu Agrawal Signed-off-by: Mark Brown --- sound/soc/amd/acp-da7219-max98357a.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/amd/acp-da7219-max98357a.c b/sound/soc/amd/acp-da7219-max98357a.c index cd3cf6e691a9..8e3275a96a82 100644 --- a/sound/soc/amd/acp-da7219-max98357a.c +++ b/sound/soc/amd/acp-da7219-max98357a.c @@ -365,7 +365,7 @@ static int cz_probe(struct platform_device *pdev) &acp_da7219_cfg); if (IS_ERR(rdev)) { dev_err(&pdev->dev, "Failed to register regulator: %d\n", - ret); + (int)PTR_ERR(rdev)); return -EINVAL; } -- cgit v1.2.3 From 3e536e222f2930534c252c1cc7ae799c725c5ff9 Mon Sep 17 00:00:00 2001 From: Snild Dolkow Date: Thu, 26 Jul 2018 09:15:39 +0200 Subject: kthread, tracing: Don't expose half-written comm when creating kthreads There is a window for racing when printing directly to task->comm, allowing other threads to see a non-terminated string. The vsnprintf function fills the buffer, counts the truncated chars, then finally writes the \0 at the end. creator other vsnprintf: fill (not terminated) count the rest trace_sched_waking(p): ... memcpy(comm, p->comm, TASK_COMM_LEN) write \0 The consequences depend on how 'other' uses the string. In our case, it was copied into the tracing system's saved cmdlines, a buffer of adjacent TASK_COMM_LEN-byte buffers (note the 'n' where 0 should be): crash-arm64> x/1024s savedcmd->saved_cmdlines | grep 'evenk' 0xffffffd5b3818640: "irq/497-pwr_evenkworker/u16:12" ...and a strcpy out of there would cause stack corruption: [224761.522292] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffff9bf9783c78 crash-arm64> kbt | grep 'comm\|trace_print_context' #6 0xffffff9bf9783c78 in trace_print_context+0x18c(+396) comm (char [16]) = "irq/497-pwr_even" crash-arm64> rd 0xffffffd4d0e17d14 8 ffffffd4d0e17d14: 2f71726900000000 5f7277702d373934 ....irq/497-pwr_ ffffffd4d0e17d24: 726f776b6e657665 3a3631752f72656b evenkworker/u16: ffffffd4d0e17d34: f9780248ff003231 cede60e0ffffff9b 12..H.x......`.. ffffffd4d0e17d44: cede60c8ffffffd4 00000fffffffffd4 .....`.......... The workaround in e09e28671 (use strlcpy in __trace_find_cmdline) was likely needed because of this same bug. Solved by vsnprintf:ing to a local buffer, then using set_task_comm(). This way, there won't be a window where comm is not terminated. Link: http://lkml.kernel.org/r/20180726071539.188015-1-snild@sony.com Cc: stable@vger.kernel.org Fixes: bc0c38d139ec7 ("ftrace: latency tracer infrastructure") Reviewed-by: Steven Rostedt (VMware) Signed-off-by: Snild Dolkow Signed-off-by: Steven Rostedt (VMware) --- kernel/kthread.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/kernel/kthread.c b/kernel/kthread.c index 750cb8082694..486dedbd9af5 100644 --- a/kernel/kthread.c +++ b/kernel/kthread.c @@ -325,8 +325,14 @@ struct task_struct *__kthread_create_on_node(int (*threadfn)(void *data), task = create->result; if (!IS_ERR(task)) { static const struct sched_param param = { .sched_priority = 0 }; + char name[TASK_COMM_LEN]; - vsnprintf(task->comm, sizeof(task->comm), namefmt, args); + /* + * task is already visible to other tasks, so updating + * COMM must be protected. + */ + vsnprintf(name, sizeof(name), namefmt, args); + set_task_comm(task, name); /* * root may have changed our (kthreadd's) priority or CPU mask. * The kernel thread should not inherit these properties. -- cgit v1.2.3 From 036e4963bfb2d4513c30efd80e4bd50ff6c79e3e Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Thu, 26 Jul 2018 14:45:42 +0200 Subject: ASoC: meson: use IRQ_RETVAL in the fifo irq handler Use IRQ_RETVAL instead of the open coded ternary operation. Suggested-by: Takashi Iwai Signed-off-by: Jerome Brunet Signed-off-by: Mark Brown --- sound/soc/meson/axg-fifo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/meson/axg-fifo.c b/sound/soc/meson/axg-fifo.c index db367d85290f..30262550e37b 100644 --- a/sound/soc/meson/axg-fifo.c +++ b/sound/soc/meson/axg-fifo.c @@ -174,7 +174,7 @@ static irqreturn_t axg_fifo_pcm_irq_block(int irq, void *dev_id) /* Ack irqs */ axg_fifo_ack_irq(fifo, status); - return !status ? IRQ_NONE : IRQ_HANDLED; + return IRQ_RETVAL(status); } static int axg_fifo_pcm_open(struct snd_pcm_substream *ss) -- cgit v1.2.3 From d9e81048127604fe6373fb76181fefcf218965f4 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Thu, 26 Jul 2018 14:45:43 +0200 Subject: ASoC: meson: update axg sound card bindings Remove the amlogic prefix in front of the generic properties and change the card 'name' property to 'model' Suggested-by: Rob Herring Signed-off-by: Jerome Brunet Signed-off-by: Mark Brown --- .../bindings/sound/amlogic,axg-sound-card.txt | 68 +++++++++++----------- 1 file changed, 34 insertions(+), 34 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.txt index 39e005da0407..80b411296480 100644 --- a/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.txt +++ b/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.txt @@ -3,19 +3,19 @@ Amlogic AXG sound card: Required properties: - compatible: "amlogic,axg-sound-card" -- amlogic,name : User specified audio sound card name, one string +- model : User specified audio sound card name, one string Optional properties: -- amlogic,aux-devs : List of phandles pointing to auxiliary devices -- amlogic,widgets : Please refer to widgets.txt. -- amlogic,routing : A list of the connections between audio components. +- audio-aux-devs : List of phandles pointing to auxiliary devices +- audio-widgets : Please refer to widgets.txt. +- audio-routing : A list of the connections between audio components. Subnodes: -- amlogic,dai-link: Container for dai-link level properties and the - CODEC sub-nodes. There should be at least one (and - probably) subnode of this type. +- dai-link: Container for dai-link level properties and the CODEC + sub-nodes. There should be at least one (and probably more) + subnode of this type. Required dai-link properties: @@ -57,38 +57,38 @@ Example: sound { compatible = "amlogic,axg-sound-card"; - amlogic,name = "AXG-S420"; - amlogic,aux-devs = <&tdmin_a>, <&tdmout_c>; - amlogic,widgets = "Line", "Lineout", - "Line", "Linein", - "Speaker", "Speaker1 Left", - "Speaker", "Speaker1 Right"; - "Speaker", "Speaker2 Left", - "Speaker", "Speaker2 Right"; - amlogic,routing = "TDMOUT_C IN 0", "FRDDR_A OUT 2", - "SPDIFOUT IN 0", "FRDDR_A OUT 3", - "TDM_C Playback", "TDMOUT_C OUT", - "TDMIN_A IN 2", "TDM_C Capture", - "TDMIN_A IN 5", "TDM_C Loopback", - "TODDR_A IN 0", "TDMIN_A OUT", - "Lineout", "Lineout AOUTL", - "Lineout", "Lineout AOUTR", - "Speaker1 Left", "SPK1 OUT_A", - "Speaker2 Left", "SPK2 OUT_A", - "Speaker1 Right", "SPK1 OUT_B", - "Speaker2 Right", "SPK2 OUT_B", - "Linein AINL", "Linein", - "Linein AINR", "Linein"; - - amlogic,dai-link@0 { + model = "AXG-S420"; + audio-aux-devs = <&tdmin_a>, <&tdmout_c>; + audio-widgets = "Line", "Lineout", + "Line", "Linein", + "Speaker", "Speaker1 Left", + "Speaker", "Speaker1 Right"; + "Speaker", "Speaker2 Left", + "Speaker", "Speaker2 Right"; + audio-routing = "TDMOUT_C IN 0", "FRDDR_A OUT 2", + "SPDIFOUT IN 0", "FRDDR_A OUT 3", + "TDM_C Playback", "TDMOUT_C OUT", + "TDMIN_A IN 2", "TDM_C Capture", + "TDMIN_A IN 5", "TDM_C Loopback", + "TODDR_A IN 0", "TDMIN_A OUT", + "Lineout", "Lineout AOUTL", + "Lineout", "Lineout AOUTR", + "Speaker1 Left", "SPK1 OUT_A", + "Speaker2 Left", "SPK2 OUT_A", + "Speaker1 Right", "SPK1 OUT_B", + "Speaker2 Right", "SPK2 OUT_B", + "Linein AINL", "Linein", + "Linein AINR", "Linein"; + + dai-link@0 { sound-dai = <&frddr_a>; }; - amlogic,dai-link@1 { + dai-link@1 { sound-dai = <&toddr_a>; }; - amlogic,dai-link@2 { + dai-link@2 { sound-dai = <&tdmif_c>; dai-format = "i2s"; dai-tdm-slot-tx-mask-2 = <1 1>; @@ -114,7 +114,7 @@ sound { }; - amlogic,dai-link@4 { + dai-link@3 { sound-dai = <&spdifout>; codec { -- cgit v1.2.3 From 435857e015dc7b337c5f21d195ac2e4ffd694283 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Thu, 26 Jul 2018 14:45:44 +0200 Subject: ASoC: meson: align axg card driver with DT bindings documentation Drop amlogic prefix in front of the generic DT properties and change property "name" to "model". Signed-off-by: Jerome Brunet Signed-off-by: Mark Brown --- sound/soc/meson/axg-card.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/sound/soc/meson/axg-card.c b/sound/soc/meson/axg-card.c index d6d1081d94ad..2914ba0d965b 100644 --- a/sound/soc/meson/axg-card.c +++ b/sound/soc/meson/axg-card.c @@ -123,7 +123,7 @@ static int axg_card_add_aux_devices(struct snd_soc_card *card) struct snd_soc_aux_dev *aux; int num, i; - num = of_count_phandle_with_args(node, PREFIX "aux-devs", NULL); + num = of_count_phandle_with_args(node, "audio-aux-devs", NULL); if (num == -ENOENT) { /* * It is ok to have no auxiliary devices but for this card it @@ -144,8 +144,8 @@ static int axg_card_add_aux_devices(struct snd_soc_card *card) card->num_aux_devs = num; for (i = 0; i < card->num_aux_devs; i++, aux++) { - aux->codec_of_node = of_parse_phandle(node, - PREFIX "aux-devs", i); + aux->codec_of_node = + of_parse_phandle(node, "audio-aux-devs", i); if (!aux->codec_of_node) return -EINVAL; } @@ -610,18 +610,18 @@ static int axg_card_probe(struct platform_device *pdev) priv->card.owner = THIS_MODULE; priv->card.dev = dev; - ret = snd_soc_of_parse_card_name(&priv->card, PREFIX "name"); + ret = snd_soc_of_parse_card_name(&priv->card, "model"); if (ret < 0) return ret; - ret = axg_card_parse_of_optional(&priv->card, PREFIX "routing", + ret = axg_card_parse_of_optional(&priv->card, "audio-routing", snd_soc_of_parse_audio_routing); if (ret) { dev_err(dev, "error while parsing routing\n"); return ret; } - ret = axg_card_parse_of_optional(&priv->card, PREFIX "widgets", + ret = axg_card_parse_of_optional(&priv->card, "audio-widgets", snd_soc_of_parse_audio_simple_widgets); if (ret) { dev_err(dev, "error while parsing widgets\n"); -- cgit v1.2.3 From 150a6dc8fc764c1912fa2a46e18d1505dfd3536f Mon Sep 17 00:00:00 2001 From: Hiroyuki Yokoyama Date: Thu, 26 Jul 2018 05:40:15 +0900 Subject: ASoC: rsnd: Document R-Car M3-N support Document support for the sound modules in the Renesas M3-N (r8a77965) SoC. No driver update is needed. Signed-off-by: Hiroyuki Yokoyama Signed-off-by: Yoshihiro Kaneko Acked-by: Kuninori Morimoto Reviewed-by: Simon Horman Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/renesas,rsnd.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt index b86d790f630f..9e764270c36b 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt @@ -352,6 +352,7 @@ Required properties: - "renesas,rcar_sound-r8a7794" (R-Car E2) - "renesas,rcar_sound-r8a7795" (R-Car H3) - "renesas,rcar_sound-r8a7796" (R-Car M3-W) + - "renesas,rcar_sound-r8a77965" (R-Car M3-N) - reg : Should contain the register physical address. required register is SRU/ADG/SSI if generation1 -- cgit v1.2.3 From c889a45d229938a94b50aadb819def8bb11a6a54 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 25 Jul 2018 22:40:49 +0200 Subject: ASoC: zte: Fix incorrect PCM format bit usages zx-tdm driver sets the DAI driver definitions with the format bits wrongly set with SNDRV_PCM_FORMAT_*, instead of SNDRV_PCM_FMTBIT_*. This patch corrects the definitions. Spotted by a sparse warning: sound/soc/zte/zx-tdm.c:363:35: warning: restricted snd_pcm_format_t degrades to integer Fixes: 870e0ddc4345 ("ASoC: zx-tdm: add zte's tdm controller driver") Cc: Signed-off-by: Takashi Iwai Signed-off-by: Mark Brown --- sound/soc/zte/zx-tdm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/zte/zx-tdm.c b/sound/soc/zte/zx-tdm.c index dc955272f58b..389272eeba9a 100644 --- a/sound/soc/zte/zx-tdm.c +++ b/sound/soc/zte/zx-tdm.c @@ -144,8 +144,8 @@ static void zx_tdm_rx_dma_en(struct zx_tdm_info *tdm, bool on) #define ZX_TDM_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000) #define ZX_TDM_FMTBIT \ - (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FORMAT_MU_LAW | \ - SNDRV_PCM_FORMAT_A_LAW) + (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_MU_LAW | \ + SNDRV_PCM_FMTBIT_A_LAW) static int zx_tdm_dai_probe(struct snd_soc_dai *dai) { -- cgit v1.2.3 From 40d1299f87bf915931970c8e6ea3852acacd1889 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 25 Jul 2018 22:42:08 +0200 Subject: ASoC: dmaengine: Fix missing __user prefix in copy_user callback It seems that __user prefix was forgotten to be added to dmaengine_copy_user callback while we refactored the user-copy PCM core. This patch adds the missing prefix, remove the superfluous cast, and add the needed cast (__force is needed for downgrading from user pointer to kernel pointer), too. Spotted by a sparse warning like: sound/soc/soc-generic-dmaengine-pcm.c:397:27: warning: incorrect type in initializer (incompatible argument 4 (different address spaces)) Signed-off-by: Takashi Iwai Signed-off-by: Mark Brown --- sound/soc/soc-generic-dmaengine-pcm.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/sound/soc/soc-generic-dmaengine-pcm.c b/sound/soc/soc-generic-dmaengine-pcm.c index 13bdca6e41c5..120f7b39e256 100644 --- a/sound/soc/soc-generic-dmaengine-pcm.c +++ b/sound/soc/soc-generic-dmaengine-pcm.c @@ -334,7 +334,7 @@ static snd_pcm_uframes_t dmaengine_pcm_pointer( static int dmaengine_copy_user(struct snd_pcm_substream *substream, int channel, unsigned long hwoff, - void *buf, unsigned long bytes) + void __user *buf, unsigned long bytes) { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_component *component = @@ -350,18 +350,17 @@ static int dmaengine_copy_user(struct snd_pcm_substream *substream, int ret; if (is_playback) - if (copy_from_user(dma_ptr, (void __user *)buf, bytes)) + if (copy_from_user(dma_ptr, buf, bytes)) return -EFAULT; if (process) { - ret = process(substream, channel, hwoff, - (void __user *)buf, bytes); + ret = process(substream, channel, hwoff, (__force void *)buf, bytes); if (ret < 0) return ret; } if (!is_playback) - if (copy_to_user((void __user *)buf, dma_ptr, bytes)) + if (copy_to_user(buf, dma_ptr, bytes)) return -EFAULT; return 0; -- cgit v1.2.3 From 3ba66feb59810e2ce616da0c4f1a5230c74768a8 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 25 Jul 2018 22:43:26 +0200 Subject: ASoC: dapm: Use int for format bit position fmt in snd_soc_dai_link_event() contains the format bit position, not the format bit itself. Hence it can be a simple integer instead of the explicit u64. Signed-off-by: Takashi Iwai Signed-off-by: Mark Brown --- sound/soc/soc-dapm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 0602b2888d52..7e96793050c9 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -3656,7 +3656,7 @@ static int snd_soc_dai_link_event(struct snd_soc_dapm_widget *w, struct snd_pcm_substream substream; struct snd_pcm_hw_params *params = NULL; struct snd_pcm_runtime *runtime = NULL; - u64 fmt; + unsigned int fmt; int ret; if (WARN_ON(!config) || -- cgit v1.2.3 From 4cae99d9b5305ab8cccc839fccceb81ec9e5abda Mon Sep 17 00:00:00 2001 From: Pierre-Louis Bossart Date: Wed, 25 Jul 2018 15:15:56 -0500 Subject: ALSA: memalloc: declare snd_sgbuf_aligned_pages() unconditionally Make this helper inline function available for all platforms. This helps solve 0-day compilation issues when CONFIG_SND_DMA_SGBUF is not defined. Reported-by: kbuild test robot Signed-off-by: Pierre-Louis Bossart Reviewed-by: Takashi Iwai Signed-off-by: Mark Brown --- include/sound/memalloc.h | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/include/sound/memalloc.h b/include/sound/memalloc.h index 9c3db3dce32b..c669900e6cbe 100644 --- a/include/sound/memalloc.h +++ b/include/sound/memalloc.h @@ -67,6 +67,14 @@ struct snd_dma_buffer { void *private_data; /* private for allocator; don't touch */ }; +/* + * return the pages matching with the given byte size + */ +static inline unsigned int snd_sgbuf_aligned_pages(size_t size) +{ + return (size + PAGE_SIZE - 1) >> PAGE_SHIFT; +} + #ifdef CONFIG_SND_DMA_SGBUF /* * Scatter-Gather generic device pages @@ -90,14 +98,6 @@ struct snd_sg_buf { struct device *dev; }; -/* - * return the pages matching with the given byte size - */ -static inline unsigned int snd_sgbuf_aligned_pages(size_t size) -{ - return (size + PAGE_SIZE - 1) >> PAGE_SHIFT; -} - /* * return the physical address at the corresponding offset */ -- cgit v1.2.3 From 0b62834e73e332fea76a340d62aaf50c732b17e0 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 25 Jul 2018 23:17:17 +0200 Subject: ALSA: pcm: Add snd_mask_set_format() helper for standard usages Many drivers calling snd_mask_set() need to do ugly cast with __force for shutting up the sparse warnings. Actually almost all of them are about setting the format, so it's far better to provide a common helper snd_mask_set_format() to pass SNDRV_PCM_FORMAT_* directly without the cast. There are a few other calls of snd_mask_set(), but they are in the PCM core code, so we leave them for now. Signed-off-by: Takashi Iwai Signed-off-by: Mark Brown --- include/sound/pcm_params.h | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/include/sound/pcm_params.h b/include/sound/pcm_params.h index c704357775fc..2dd37cada7c0 100644 --- a/include/sound/pcm_params.h +++ b/include/sound/pcm_params.h @@ -87,6 +87,13 @@ static inline void snd_mask_set(struct snd_mask *mask, unsigned int val) mask->bits[MASK_OFS(val)] |= MASK_BIT(val); } +/* Most of drivers need only this one */ +static inline void snd_mask_set_format(struct snd_mask *mask, + snd_pcm_format_t format) +{ + snd_mask_set(mask, (__force unsigned int)format); +} + static inline void snd_mask_reset(struct snd_mask *mask, unsigned int val) { mask->bits[MASK_OFS(val)] &= ~MASK_BIT(val); @@ -369,8 +376,7 @@ static inline int params_physical_width(const struct snd_pcm_hw_params *p) static inline void params_set_format(struct snd_pcm_hw_params *p, snd_pcm_format_t fmt) { - snd_mask_set(hw_param_mask(p, SNDRV_PCM_HW_PARAM_FORMAT), - (__force int)fmt); + snd_mask_set_format(hw_param_mask(p, SNDRV_PCM_HW_PARAM_FORMAT), fmt); } #endif /* __SOUND_PCM_PARAMS_H */ -- cgit v1.2.3 From 533a9274850b041b32fbe6d1df58a5c5b0b9e652 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 25 Jul 2018 23:17:18 +0200 Subject: ASoC: doc: Replace open code with params_set_format() The example code in dpcm.rst contains an open code calling snd_mask_set(), and this can be better represented with params_set_format() instead. This automatically fixes the sparse warning about snd_pcm_format_t handling, too. Signed-off-by: Takashi Iwai Signed-off-by: Mark Brown --- Documentation/sound/soc/dpcm.rst | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/Documentation/sound/soc/dpcm.rst b/Documentation/sound/soc/dpcm.rst index 395e5a516282..fe61e02277f8 100644 --- a/Documentation/sound/soc/dpcm.rst +++ b/Documentation/sound/soc/dpcm.rst @@ -254,9 +254,7 @@ configuration. channels->min = channels->max = 2; /* set DAI0 to 16 bit */ - snd_mask_set(¶ms->masks[SNDRV_PCM_HW_PARAM_FORMAT - - SNDRV_PCM_HW_PARAM_FIRST_MASK], - SNDRV_PCM_FORMAT_S16_LE); + params_set_format(params, SNDRV_PCM_FORMAT_S16_LE); return 0; } -- cgit v1.2.3 From b5453e8ca311fdb6003c6583ad101d2b9131b994 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 25 Jul 2018 23:17:19 +0200 Subject: ASoC: intel: Fix snd_pcm_format_t handling As sparse warns, the PCM format type can't be dealt as integer as found in Intel SST driver codes. Fix them in the following two ways: - The open code with snd_mask_set() and params->masks reference is replaced with params_set_format() - The rest codes with snd_mask_set(fmt, SNDRV_PCM_FORMAT_XXX) are replaced with the new helper, snd_mask_set_format(). Reported-by: Pierre-Louis Bossart Signed-off-by: Takashi Iwai Signed-off-by: Mark Brown --- sound/soc/intel/boards/bdw-rt5677.c | 4 +--- sound/soc/intel/boards/bxt_da7219_max98357a.c | 2 +- sound/soc/intel/boards/bxt_rt298.c | 2 +- sound/soc/intel/boards/kbl_da7219_max98357a.c | 2 +- sound/soc/intel/boards/kbl_rt5663_max98927.c | 4 ++-- sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c | 4 ++-- sound/soc/intel/boards/skl_nau88l25_max98357a.c | 2 +- sound/soc/intel/boards/skl_nau88l25_ssm4567.c | 2 +- sound/soc/intel/boards/skl_rt286.c | 2 +- 9 files changed, 11 insertions(+), 13 deletions(-) diff --git a/sound/soc/intel/boards/bdw-rt5677.c b/sound/soc/intel/boards/bdw-rt5677.c index 6ea360f33575..efcfd906c856 100644 --- a/sound/soc/intel/boards/bdw-rt5677.c +++ b/sound/soc/intel/boards/bdw-rt5677.c @@ -154,9 +154,7 @@ static int broadwell_ssp0_fixup(struct snd_soc_pcm_runtime *rtd, channels->min = channels->max = 2; /* set SSP0 to 16 bit */ - snd_mask_set(¶ms->masks[SNDRV_PCM_HW_PARAM_FORMAT - - SNDRV_PCM_HW_PARAM_FIRST_MASK], - SNDRV_PCM_FORMAT_S16_LE); + params_set_format(params, SNDRV_PCM_FORMAT_S16_LE); return 0; } diff --git a/sound/soc/intel/boards/bxt_da7219_max98357a.c b/sound/soc/intel/boards/bxt_da7219_max98357a.c index 3aba5bcf806a..be6e4b40bf03 100644 --- a/sound/soc/intel/boards/bxt_da7219_max98357a.c +++ b/sound/soc/intel/boards/bxt_da7219_max98357a.c @@ -160,7 +160,7 @@ static int broxton_ssp_fixup(struct snd_soc_pcm_runtime *rtd, /* set SSP to 24 bit */ snd_mask_none(fmt); - snd_mask_set(fmt, SNDRV_PCM_FORMAT_S24_LE); + snd_mask_set_format(fmt, SNDRV_PCM_FORMAT_S24_LE); return 0; } diff --git a/sound/soc/intel/boards/bxt_rt298.c b/sound/soc/intel/boards/bxt_rt298.c index b68c289558a8..27308337ab12 100644 --- a/sound/soc/intel/boards/bxt_rt298.c +++ b/sound/soc/intel/boards/bxt_rt298.c @@ -221,7 +221,7 @@ static int broxton_ssp5_fixup(struct snd_soc_pcm_runtime *rtd, /* set SSP5 to 24 bit */ snd_mask_none(fmt); - snd_mask_set(fmt, SNDRV_PCM_FORMAT_S24_LE); + snd_mask_set_format(fmt, SNDRV_PCM_FORMAT_S24_LE); return 0; } diff --git a/sound/soc/intel/boards/kbl_da7219_max98357a.c b/sound/soc/intel/boards/kbl_da7219_max98357a.c index 7961f1fd18bd..38f6ab74709d 100644 --- a/sound/soc/intel/boards/kbl_da7219_max98357a.c +++ b/sound/soc/intel/boards/kbl_da7219_max98357a.c @@ -152,7 +152,7 @@ static int kabylake_ssp_fixup(struct snd_soc_pcm_runtime *rtd, /* set SSP to 24 bit */ snd_mask_none(fmt); - snd_mask_set(fmt, SNDRV_PCM_FORMAT_S24_LE); + snd_mask_set_format(fmt, SNDRV_PCM_FORMAT_S24_LE); return 0; } diff --git a/sound/soc/intel/boards/kbl_rt5663_max98927.c b/sound/soc/intel/boards/kbl_rt5663_max98927.c index 3a61252fe450..21a6490746a6 100644 --- a/sound/soc/intel/boards/kbl_rt5663_max98927.c +++ b/sound/soc/intel/boards/kbl_rt5663_max98927.c @@ -434,14 +434,14 @@ static int kabylake_ssp_fixup(struct snd_soc_pcm_runtime *rtd, rate->min = rate->max = 48000; channels->min = channels->max = 2; snd_mask_none(fmt); - snd_mask_set(fmt, SNDRV_PCM_FORMAT_S24_LE); + snd_mask_set_format(fmt, SNDRV_PCM_FORMAT_S24_LE); } /* * The speaker on the SSP0 supports S16_LE and not S24_LE. * thus changing the mask here */ if (!strcmp(be_dai_link->name, "SSP0-Codec")) - snd_mask_set(fmt, SNDRV_PCM_FORMAT_S16_LE); + snd_mask_set_format(fmt, SNDRV_PCM_FORMAT_S16_LE); return 0; } diff --git a/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c b/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c index 92f5fb2ae0a3..a892b37eab7c 100644 --- a/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c +++ b/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c @@ -307,7 +307,7 @@ static int kabylake_ssp_fixup(struct snd_soc_pcm_runtime *rtd, rate->min = rate->max = 48000; channels->min = channels->max = 2; snd_mask_none(fmt); - snd_mask_set(fmt, SNDRV_PCM_FORMAT_S24_LE); + snd_mask_set_format(fmt, SNDRV_PCM_FORMAT_S24_LE); } else if (!strcmp(fe_dai_link->name, "Kbl Audio DMIC cap")) { if (params_channels(params) == 2 || DMIC_CH(dmic_constraints) == 2) @@ -320,7 +320,7 @@ static int kabylake_ssp_fixup(struct snd_soc_pcm_runtime *rtd, * thus changing the mask here */ if (!strcmp(be_dai_link->name, "SSP0-Codec")) - snd_mask_set(fmt, SNDRV_PCM_FORMAT_S16_LE); + snd_mask_set_format(fmt, SNDRV_PCM_FORMAT_S16_LE); return 0; } diff --git a/sound/soc/intel/boards/skl_nau88l25_max98357a.c b/sound/soc/intel/boards/skl_nau88l25_max98357a.c index 3ff6646cfa21..d31482b8c9bb 100644 --- a/sound/soc/intel/boards/skl_nau88l25_max98357a.c +++ b/sound/soc/intel/boards/skl_nau88l25_max98357a.c @@ -157,7 +157,7 @@ static int skylake_ssp_fixup(struct snd_soc_pcm_runtime *rtd, /* set SSP0 to 24 bit */ snd_mask_none(fmt); - snd_mask_set(fmt, SNDRV_PCM_FORMAT_S24_LE); + snd_mask_set_format(fmt, SNDRV_PCM_FORMAT_S24_LE); return 0; } diff --git a/sound/soc/intel/boards/skl_nau88l25_ssm4567.c b/sound/soc/intel/boards/skl_nau88l25_ssm4567.c index b0610bba3cfa..e877bb60beb1 100644 --- a/sound/soc/intel/boards/skl_nau88l25_ssm4567.c +++ b/sound/soc/intel/boards/skl_nau88l25_ssm4567.c @@ -346,7 +346,7 @@ static int skylake_ssp_fixup(struct snd_soc_pcm_runtime *rtd, /* set SSP0 to 24 bit */ snd_mask_none(fmt); - snd_mask_set(fmt, SNDRV_PCM_FORMAT_S24_LE); + snd_mask_set_format(fmt, SNDRV_PCM_FORMAT_S24_LE); return 0; } diff --git a/sound/soc/intel/boards/skl_rt286.c b/sound/soc/intel/boards/skl_rt286.c index 38a1495c29cf..0e1818dd4cc6 100644 --- a/sound/soc/intel/boards/skl_rt286.c +++ b/sound/soc/intel/boards/skl_rt286.c @@ -229,7 +229,7 @@ static int skylake_ssp0_fixup(struct snd_soc_pcm_runtime *rtd, /* set SSP0 to 24 bit */ snd_mask_none(fmt); - snd_mask_set(fmt, SNDRV_PCM_FORMAT_S24_LE); + snd_mask_set_format(fmt, SNDRV_PCM_FORMAT_S24_LE); return 0; } -- cgit v1.2.3 From ebc22af0c9268dc4032326c20b02f2f227203330 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 25 Jul 2018 23:17:20 +0200 Subject: ASoC: fsl: Use snd_mask_set_format() Use the new helper function snd_mask_set_format() for avoiding the ugly cast with __force prefix. Signed-off-by: Takashi Iwai Signed-off-by: Mark Brown --- sound/soc/fsl/fsl-asoc-card.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/fsl/fsl-asoc-card.c b/sound/soc/fsl/fsl-asoc-card.c index 07808c6d5461..44433b20435c 100644 --- a/sound/soc/fsl/fsl-asoc-card.c +++ b/sound/soc/fsl/fsl-asoc-card.c @@ -195,7 +195,7 @@ static int be_hw_params_fixup(struct snd_soc_pcm_runtime *rtd, mask = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT); snd_mask_none(mask); - snd_mask_set(mask, (__force int)priv->asrc_format); + snd_mask_set_format(mask, priv->asrc_format); return 0; } -- cgit v1.2.3 From 79b8a50813a80ac15fdcdc96674098dee15eaaf5 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 25 Jul 2018 23:17:21 +0200 Subject: ASoC: pcm186x: Declare PCM format with snd_pcm_format_t The PCM format type is with __bitwise, so we should use the dedicated snd_pcm_format_t instead of int. This fixes the sparse warning like: sound/soc/codecs/pcm186x.c:268:44: warning: incorrect type in initializer (different base types) Signed-off-by: Takashi Iwai Signed-off-by: Mark Brown --- sound/soc/codecs/pcm186x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/pcm186x.c b/sound/soc/codecs/pcm186x.c index 88fde70b1e9e..690c26e7389e 100644 --- a/sound/soc/codecs/pcm186x.c +++ b/sound/soc/codecs/pcm186x.c @@ -265,7 +265,7 @@ static int pcm186x_hw_params(struct snd_pcm_substream *substream, struct snd_soc_component *component = dai->component; struct pcm186x_priv *priv = snd_soc_component_get_drvdata(component); unsigned int rate = params_rate(params); - unsigned int format = params_format(params); + snd_pcm_format_t format = params_format(params); unsigned int width = params_width(params); unsigned int channels = params_channels(params); unsigned int div_lrck; -- cgit v1.2.3 From 8adf3df4156345f1edcdfa8c7f7beeb0de351ce2 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 25 Jul 2018 23:17:22 +0200 Subject: ASoC: dmaengine: Use standard pcm_format_to_bits() macro The conversion from PCM format type to bits needs an explicit cast, and it'll be uglier. Since we have a standard macro for that, let's use it instead. This patch fixes the sparse warning: sound/soc/soc-generic-dmaengine-pcm.c:200:63: warning: restricted snd_pcm_format_t degrades to integer Signed-off-by: Takashi Iwai Signed-off-by: Mark Brown --- sound/soc/soc-generic-dmaengine-pcm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/soc-generic-dmaengine-pcm.c b/sound/soc/soc-generic-dmaengine-pcm.c index 120f7b39e256..52fd7af952a5 100644 --- a/sound/soc/soc-generic-dmaengine-pcm.c +++ b/sound/soc/soc-generic-dmaengine-pcm.c @@ -188,7 +188,7 @@ static int dmaengine_pcm_set_runtime_hwparams(struct snd_pcm_substream *substrea case 32: case 64: if (addr_widths & (1 << (bits / 8))) - hw.formats |= (1LL << i); + hw.formats |= pcm_format_to_bits(i); break; default: /* Unsupported types */ -- cgit v1.2.3 From 7f3fc7ddf719cd6faaf787722c511f6918ac6aab Mon Sep 17 00:00:00 2001 From: tangpengpeng Date: Thu, 26 Jul 2018 14:45:16 +0800 Subject: net: fix amd-xgbe flow-control issue If we enable or disable xgbe flow-control by ethtool , it does't work.Because the parameter is not properly assigned,so we need to adjust the assignment order of the parameters. Fixes: c1ce2f77366b ("amd-xgbe: Fix flow control setting logic") Signed-off-by: tangpengpeng Acked-by: Tom Lendacky Signed-off-by: David S. Miller --- drivers/net/ethernet/amd/xgbe/xgbe-mdio.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-mdio.c b/drivers/net/ethernet/amd/xgbe/xgbe-mdio.c index 4b5d625de8f0..8a3a60bb2688 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-mdio.c +++ b/drivers/net/ethernet/amd/xgbe/xgbe-mdio.c @@ -1111,14 +1111,14 @@ static void xgbe_phy_adjust_link(struct xgbe_prv_data *pdata) if (pdata->tx_pause != pdata->phy.tx_pause) { new_state = 1; - pdata->hw_if.config_tx_flow_control(pdata); pdata->tx_pause = pdata->phy.tx_pause; + pdata->hw_if.config_tx_flow_control(pdata); } if (pdata->rx_pause != pdata->phy.rx_pause) { new_state = 1; - pdata->hw_if.config_rx_flow_control(pdata); pdata->rx_pause = pdata->phy.rx_pause; + pdata->hw_if.config_rx_flow_control(pdata); } /* Speed support */ -- cgit v1.2.3 From bd91b56cb3b27492963caeb5fccefe20a986ca8d Mon Sep 17 00:00:00 2001 From: Thomas Tai Date: Thu, 26 Jul 2018 12:13:04 -0500 Subject: PCI/AER: Work around use-after-free in pcie_do_fatal_recovery() When an fatal error is received by a non-bridge device, the device is removed, and pci_stop_and_remove_bus_device() deallocates the device structure. The freed device structure is used by subsequent code to send uevents and print messages. Hold a reference on the device until we're finished using it. This is not an ideal fix because pcie_do_fatal_recovery() should not use the device at all after removing it, but that's too big a project for right now. Fixes: 7e9084b36740 ("PCI/AER: Handle ERR_FATAL with removal and re-enumeration of devices") Signed-off-by: Thomas Tai [bhelgaas: changelog, reduce get/put coverage] Signed-off-by: Bjorn Helgaas --- drivers/pci/pcie/err.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c index f7ce0cb0b0b7..f02e334beb45 100644 --- a/drivers/pci/pcie/err.c +++ b/drivers/pci/pcie/err.c @@ -295,6 +295,7 @@ void pcie_do_fatal_recovery(struct pci_dev *dev, u32 service) parent = udev->subordinate; pci_lock_rescan_remove(); + pci_dev_get(dev); list_for_each_entry_safe_reverse(pdev, temp, &parent->devices, bus_list) { pci_dev_get(pdev); @@ -328,6 +329,7 @@ void pcie_do_fatal_recovery(struct pci_dev *dev, u32 service) pci_info(dev, "Device recovery from fatal error failed\n"); } + pci_dev_put(dev); pci_unlock_rescan_remove(); } -- cgit v1.2.3 From b403ea2404889e1227812fa9657667a1deb9c694 Mon Sep 17 00:00:00 2001 From: Martin Wilck Date: Wed, 25 Jul 2018 23:15:07 +0200 Subject: block: bio_iov_iter_get_pages: fix size of last iovec If the last page of the bio is not "full", the length of the last vector slot needs to be corrected. This slot has the index (bio->bi_vcnt - 1), but only in bio->bi_io_vec. In the "bv" helper array, which is shifted by the value of bio->bi_vcnt at function invocation, the correct index is (nr_pages - 1). v2: improved readability following suggestions from Ming Lei. v3: followed a formatting suggestion from Christoph Hellwig. Fixes: 2cefe4dbaadf ("block: add bio_iov_iter_get_pages()") Reviewed-by: Hannes Reinecke Reviewed-by: Ming Lei Reviewed-by: Jan Kara Reviewed-by: Christoph Hellwig Signed-off-by: Martin Wilck Signed-off-by: Jens Axboe --- block/bio.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) diff --git a/block/bio.c b/block/bio.c index f7e3d88bd0b6..cd55ea6bd47c 100644 --- a/block/bio.c +++ b/block/bio.c @@ -912,16 +912,16 @@ EXPORT_SYMBOL(bio_add_page); */ int bio_iov_iter_get_pages(struct bio *bio, struct iov_iter *iter) { - unsigned short nr_pages = bio->bi_max_vecs - bio->bi_vcnt; + unsigned short nr_pages = bio->bi_max_vecs - bio->bi_vcnt, idx; struct bio_vec *bv = bio->bi_io_vec + bio->bi_vcnt; struct page **pages = (struct page **)bv; - size_t offset, diff; + size_t offset; ssize_t size; size = iov_iter_get_pages(iter, pages, LONG_MAX, nr_pages, &offset); if (unlikely(size <= 0)) return size ? size : -EFAULT; - nr_pages = (size + offset + PAGE_SIZE - 1) / PAGE_SIZE; + idx = nr_pages = (size + offset + PAGE_SIZE - 1) / PAGE_SIZE; /* * Deep magic below: We need to walk the pinned pages backwards @@ -934,17 +934,15 @@ int bio_iov_iter_get_pages(struct bio *bio, struct iov_iter *iter) bio->bi_iter.bi_size += size; bio->bi_vcnt += nr_pages; - diff = (nr_pages * PAGE_SIZE - offset) - size; - while (nr_pages--) { - bv[nr_pages].bv_page = pages[nr_pages]; - bv[nr_pages].bv_len = PAGE_SIZE; - bv[nr_pages].bv_offset = 0; + while (idx--) { + bv[idx].bv_page = pages[idx]; + bv[idx].bv_len = PAGE_SIZE; + bv[idx].bv_offset = 0; } bv[0].bv_offset += offset; bv[0].bv_len -= offset; - if (diff) - bv[bio->bi_vcnt - 1].bv_len -= diff; + bv[nr_pages - 1].bv_len -= nr_pages * PAGE_SIZE - offset - size; iov_iter_advance(iter, size); return 0; -- cgit v1.2.3 From 9362dd1109f87a9d0a798fbc890cb339c171ed35 Mon Sep 17 00:00:00 2001 From: Martin Wilck Date: Wed, 25 Jul 2018 23:15:08 +0200 Subject: blkdev: __blkdev_direct_IO_simple: fix leak in error case Fixes: 72ecad22d9f1 ("block: support a full bio worth of IO for simplified bdev direct-io") Reviewed-by: Ming Lei Reviewed-by: Hannes Reinecke Reviewed-by: Christoph Hellwig Signed-off-by: Martin Wilck Signed-off-by: Jens Axboe --- fs/block_dev.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/fs/block_dev.c b/fs/block_dev.c index 05e12aea2404..192005376884 100644 --- a/fs/block_dev.c +++ b/fs/block_dev.c @@ -220,7 +220,7 @@ __blkdev_direct_IO_simple(struct kiocb *iocb, struct iov_iter *iter, ret = bio_iov_iter_get_pages(&bio, iter); if (unlikely(ret)) - return ret; + goto out; ret = bio.bi_iter.bi_size; if (iov_iter_rw(iter) == READ) { @@ -249,12 +249,13 @@ __blkdev_direct_IO_simple(struct kiocb *iocb, struct iov_iter *iter, put_page(bvec->bv_page); } - if (vecs != inline_vecs) - kfree(vecs); - if (unlikely(bio.bi_status)) ret = blk_status_to_errno(bio.bi_status); +out: + if (vecs != inline_vecs) + kfree(vecs); + bio_uninit(&bio); return ret; -- cgit v1.2.3 From 17d51b10d7773e4618bcac64648f30f12d4078fb Mon Sep 17 00:00:00 2001 From: Martin Wilck Date: Wed, 25 Jul 2018 23:15:09 +0200 Subject: block: bio_iov_iter_get_pages: pin more pages for multi-segment IOs bio_iov_iter_get_pages() currently only adds pages for the next non-zero segment from the iov_iter to the bio. That's suboptimal for callers, which typically try to pin as many pages as fit into the bio. This patch converts the current bio_iov_iter_get_pages() into a static helper, and introduces a new helper that allocates as many pages as 1) fit into the bio, 2) are present in the iov_iter, 3) and can be pinned by MM. Error is returned only if zero pages could be pinned. Because of 3), a zero return value doesn't necessarily mean all pages have been pinned. Callers that have to pin every page in the iov_iter must still call this function in a loop (this is currently the case). This change matters most for __blkdev_direct_IO_simple(), which calls bio_iov_iter_get_pages() only once. If it obtains less pages than requested, it returns a "short write" or "short read", and __generic_file_write_iter() falls back to buffered writes, which may lead to data corruption. Fixes: 72ecad22d9f1 ("block: support a full bio worth of IO for simplified bdev direct-io") Reviewed-by: Christoph Hellwig Signed-off-by: Martin Wilck Signed-off-by: Jens Axboe --- block/bio.c | 35 ++++++++++++++++++++++++++++++++--- 1 file changed, 32 insertions(+), 3 deletions(-) diff --git a/block/bio.c b/block/bio.c index cd55ea6bd47c..dc07a427e782 100644 --- a/block/bio.c +++ b/block/bio.c @@ -903,14 +903,16 @@ int bio_add_page(struct bio *bio, struct page *page, EXPORT_SYMBOL(bio_add_page); /** - * bio_iov_iter_get_pages - pin user or kernel pages and add them to a bio + * __bio_iov_iter_get_pages - pin user or kernel pages and add them to a bio * @bio: bio to add pages to * @iter: iov iterator describing the region to be mapped * - * Pins as many pages from *iter and appends them to @bio's bvec array. The + * Pins pages from *iter and appends them to @bio's bvec array. The * pages will have to be released using put_page() when done. + * For multi-segment *iter, this function only adds pages from the + * the next non-empty segment of the iov iterator. */ -int bio_iov_iter_get_pages(struct bio *bio, struct iov_iter *iter) +static int __bio_iov_iter_get_pages(struct bio *bio, struct iov_iter *iter) { unsigned short nr_pages = bio->bi_max_vecs - bio->bi_vcnt, idx; struct bio_vec *bv = bio->bi_io_vec + bio->bi_vcnt; @@ -947,6 +949,33 @@ int bio_iov_iter_get_pages(struct bio *bio, struct iov_iter *iter) iov_iter_advance(iter, size); return 0; } + +/** + * bio_iov_iter_get_pages - pin user or kernel pages and add them to a bio + * @bio: bio to add pages to + * @iter: iov iterator describing the region to be mapped + * + * Pins pages from *iter and appends them to @bio's bvec array. The + * pages will have to be released using put_page() when done. + * The function tries, but does not guarantee, to pin as many pages as + * fit into the bio, or are requested in *iter, whatever is smaller. + * If MM encounters an error pinning the requested pages, it stops. + * Error is returned only if 0 pages could be pinned. + */ +int bio_iov_iter_get_pages(struct bio *bio, struct iov_iter *iter) +{ + unsigned short orig_vcnt = bio->bi_vcnt; + + do { + int ret = __bio_iov_iter_get_pages(bio, iter); + + if (unlikely(ret)) + return bio->bi_vcnt > orig_vcnt ? 0 : ret; + + } while (iov_iter_count(iter) && !bio_full(bio)); + + return 0; +} EXPORT_SYMBOL_GPL(bio_iov_iter_get_pages); static void submit_bio_wait_endio(struct bio *bio) -- cgit v1.2.3 From 4f206a0fabc3e806349add0996b3a999739559d2 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Wed, 25 Jul 2018 11:52:06 +0300 Subject: tools/power turbostat: fix bogus summary values This patch fixes a regression introduced in commit 8cb48b32a5de ("tools/power turbostat: track thread ID in cpu_topology") Turbostat uses incorrect cores number ('topo.num_cores') - its value is count of logical CPUs, instead of count of physical cores. So it is twice as large as it should be on a typical Intel system. For example, on a 6 core Xeon system 'topo.num_cores' is 12, and on a 52 core Xeon system 'topo.num_cores' is 104. And interestingly, on a 68-core Knights Landing Intel system 'topo.num_cores' is 272, because this system has 4 logical CPUs per core. As a result, some of the turbostat calculations are incorrect. For example, on idle 52-core Xeon system when all cores are ~99% in Core C6 (CPU%c6), the summary (very first) line shows ~48% Core C6, while it should be ~99%. This patch fixes the problem by fixing 'topo.num_cores' calculation. Was: 1. Init 'thread_id' for all CPUs to -1 2. Run 'get_thread_siblings()' which sets it to 0 or 1 3. Increment 'topo.num_cores' when thread_id != -1 (bug!) Now: 1. Init 'thread_id' for all CPUs to -1 2. Run 'get_thread_siblings()' which sets it to 0 or 1 3. Increment 'topo.num_cores' when thread_id is not 0 I did not have a chance to test this on an AMD machine, and only tested on a couple of Intel Xeons (6 and 52 cores). Reported-by: Vladislav Govtva Signed-off-by: Artem Bityutskiy Signed-off-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 81a1df0fb5e2..1b53a2489ebb 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -4838,7 +4838,7 @@ void topology_probe() siblings = get_thread_siblings(&cpus[i]); if (siblings > max_siblings) max_siblings = siblings; - if (cpus[i].thread_id != -1) + if (cpus[i].thread_id == 0) topo.num_cores++; if (debug > 1) -- cgit v1.2.3 From cfce494db3bfccd2a0774652b95f286639acef36 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Wed, 25 Jul 2018 17:25:29 -0400 Subject: tools/power turbostat: fix x2apic debug message output file A recently added x2apic debug message was hard-coded to stderr. That doesn't work with "-o outfile". Signed-off-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 1b53a2489ebb..02e71accad16 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -1690,7 +1690,7 @@ void get_apic_id(struct thread_data *t) t->x2apic_id = edx; if (debug && (t->apic_id != t->x2apic_id)) - fprintf(stderr, "cpu%d: apic 0x%x x2apic 0x%x\n", t->cpu_id, t->apic_id, t->x2apic_id); + fprintf(outf, "cpu%d: apic 0x%x x2apic 0x%x\n", t->cpu_id, t->apic_id, t->x2apic_id); } /* -- cgit v1.2.3 From 2ffbb22406079fec2c3a6ad6ee1dc99fede740ac Mon Sep 17 00:00:00 2001 From: Prarit Bhargava Date: Thu, 26 Jul 2018 09:08:54 -0400 Subject: tools/power turbostat: Fix logical node enumeration to allow for non-sequential physical nodes turbostat fails on some multi-package topologies because the logical node enumeration assumes that the nodes are sequentially numbered, which causes the logical numa nodes to not be enumerated, or enumerated incorrectly. Use a more robust enumeration algorithm which allows for non-seqential physical nodes. Signed-off-by: Prarit Bhargava Signed-off-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 106 ++++++++++++++++------------------ 1 file changed, 50 insertions(+), 56 deletions(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 02e71accad16..2b0135599f37 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -2471,55 +2471,43 @@ int get_core_id(int cpu) void set_node_data(void) { - char path[80]; - FILE *filep; - int pkg, node, cpu; - - struct pkg_node_info { - int count; - int min; - } *pni; - - pni = calloc(topo.num_packages, sizeof(struct pkg_node_info)); - if (!pni) - err(1, "calloc pkg_node_count"); - - for (pkg = 0; pkg < topo.num_packages; pkg++) - pni[pkg].min = topo.num_cpus; - - for (node = 0; node <= topo.max_node_num; node++) { - /* find the "first" cpu in the node */ - sprintf(path, "/sys/bus/node/devices/node%d/cpulist", node); - filep = fopen(path, "r"); - if (!filep) - continue; - fscanf(filep, "%d", &cpu); - fclose(filep); - - pkg = cpus[cpu].physical_package_id; - pni[pkg].count++; - - if (node < pni[pkg].min) - pni[pkg].min = node; - } - - for (pkg = 0; pkg < topo.num_packages; pkg++) - if (pni[pkg].count > topo.nodes_per_pkg) - topo.nodes_per_pkg = pni[0].count; - - /* Fake 1 node per pkg for machines that don't - * expose nodes and thus avoid -nan results - */ - if (topo.nodes_per_pkg == 0) - topo.nodes_per_pkg = 1; - - for (cpu = 0; cpu < topo.num_cpus; cpu++) { - pkg = cpus[cpu].physical_package_id; - node = cpus[cpu].physical_node_id; - cpus[cpu].logical_node_id = node - pni[pkg].min; + int pkg, node, lnode, cpu, cpux; + int cpu_count; + + /* initialize logical_node_id */ + for (cpu = 0; cpu <= topo.max_cpu_num; ++cpu) + cpus[cpu].logical_node_id = -1; + + cpu_count = 0; + for (pkg = 0; pkg < topo.num_packages; pkg++) { + lnode = 0; + for (cpu = 0; cpu <= topo.max_cpu_num; ++cpu) { + if (cpus[cpu].physical_package_id != pkg) + continue; + /* find a cpu with an unset logical_node_id */ + if (cpus[cpu].logical_node_id != -1) + continue; + cpus[cpu].logical_node_id = lnode; + node = cpus[cpu].physical_node_id; + cpu_count++; + /* + * find all matching cpus on this pkg and set + * the logical_node_id + */ + for (cpux = cpu; cpux <= topo.max_cpu_num; cpux++) { + if ((cpus[cpux].physical_package_id == pkg) && + (cpus[cpux].physical_node_id == node)) { + cpus[cpux].logical_node_id = lnode; + cpu_count++; + } + } + lnode++; + if (lnode > topo.nodes_per_pkg) + topo.nodes_per_pkg = lnode; + } + if (cpu_count >= topo.max_cpu_num) + break; } - free(pni); - } int get_physical_node_id(struct cpu_topology *thiscpu) @@ -4840,14 +4828,6 @@ void topology_probe() max_siblings = siblings; if (cpus[i].thread_id == 0) topo.num_cores++; - - if (debug > 1) - fprintf(outf, - "cpu %d pkg %d node %d core %d thread %d\n", - i, cpus[i].physical_package_id, - cpus[i].physical_node_id, - cpus[i].physical_core_id, - cpus[i].thread_id); } topo.cores_per_node = max_core_id + 1; @@ -4873,6 +4853,20 @@ void topology_probe() topo.threads_per_core = max_siblings; if (debug > 1) fprintf(outf, "max_siblings %d\n", max_siblings); + + if (debug < 1) + return; + + for (i = 0; i <= topo.max_cpu_num; ++i) { + fprintf(outf, + "cpu %d pkg %d node %d lnode %d core %d thread %d\n", + i, cpus[i].physical_package_id, + cpus[i].physical_node_id, + cpus[i].logical_node_id, + cpus[i].physical_core_id, + cpus[i].thread_id); + } + } void -- cgit v1.2.3 From 7effaf06c3cdef6855e127886c7405b9ab62f90d Mon Sep 17 00:00:00 2001 From: Tariq Toukan Date: Tue, 24 Jul 2018 14:12:20 +0300 Subject: net: rollback orig value on failure of dev_qdisc_change_tx_queue_len Fix dev_change_tx_queue_len so it rolls back original value upon a failure in dev_qdisc_change_tx_queue_len. This is already done for notifirers' failures, share the code. In case of failure in dev_qdisc_change_tx_queue_len, some tx queues would still be of the new length, while they should be reverted. Currently, the revert is not done, and is marked with a TODO label in dev_qdisc_change_tx_queue_len, and should find some nice solution to do it. Yet it is still better to not apply the newly requested value. Fixes: 48bfd55e7e41 ("net_sched: plug in qdisc ops change_tx_queue_len") Signed-off-by: Tariq Toukan Reviewed-by: Eran Ben Elisha Reported-by: Ran Rozenstein Cc: Cong Wang Signed-off-by: David S. Miller --- net/core/dev.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/net/core/dev.c b/net/core/dev.c index a5aa1c7444e6..559a91271f82 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -7149,16 +7149,19 @@ int dev_change_tx_queue_len(struct net_device *dev, unsigned long new_len) dev->tx_queue_len = new_len; res = call_netdevice_notifiers(NETDEV_CHANGE_TX_QUEUE_LEN, dev); res = notifier_to_errno(res); - if (res) { - netdev_err(dev, - "refused to change device tx_queue_len\n"); - dev->tx_queue_len = orig_len; - return res; - } - return dev_qdisc_change_tx_queue_len(dev); + if (res) + goto err_rollback; + res = dev_qdisc_change_tx_queue_len(dev); + if (res) + goto err_rollback; } return 0; + +err_rollback: + netdev_err(dev, "refused to change device tx_queue_len\n"); + dev->tx_queue_len = orig_len; + return res; } /** -- cgit v1.2.3 From 9e630bcb7701f94dbd729fe57d37c089c763ad9f Mon Sep 17 00:00:00 2001 From: Avinash Repaka Date: Tue, 24 Jul 2018 20:31:58 -0700 Subject: RDS: RDMA: Fix the NULL-ptr deref in rds_ib_get_mr Registration of a memory region(MR) through FRMR/fastreg(unlike FMR) needs a connection/qp. With a proxy qp, this dependency on connection will be removed, but that needs more infrastructure patches, which is a work in progress. As an intermediate fix, the get_mr returns EOPNOTSUPP when connection details are not populated. The MR registration through sendmsg() will continue to work even with fast registration, since connection in this case is formed upfront. This patch fixes the following crash: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Modules linked in: CPU: 1 PID: 4244 Comm: syzkaller468044 Not tainted 4.16.0-rc6+ #361 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:rds_ib_get_mr+0x5c/0x230 net/rds/ib_rdma.c:544 RSP: 0018:ffff8801b059f890 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff8801b07e1300 RCX: ffffffff8562d96e RDX: 000000000000000d RSI: 0000000000000001 RDI: 0000000000000068 RBP: ffff8801b059f8b8 R08: ffffed0036274244 R09: ffff8801b13a1200 R10: 0000000000000004 R11: ffffed0036274243 R12: ffff8801b13a1200 R13: 0000000000000001 R14: ffff8801ca09fa9c R15: 0000000000000000 FS: 00007f4d050af700(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f4d050aee78 CR3: 00000001b0d9b006 CR4: 00000000001606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __rds_rdma_map+0x710/0x1050 net/rds/rdma.c:271 rds_get_mr_for_dest+0x1d4/0x2c0 net/rds/rdma.c:357 rds_setsockopt+0x6cc/0x980 net/rds/af_rds.c:347 SYSC_setsockopt net/socket.c:1849 [inline] SyS_setsockopt+0x189/0x360 net/socket.c:1828 do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x4456d9 RSP: 002b:00007f4d050aedb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 00000000006dac3c RCX: 00000000004456d9 RDX: 0000000000000007 RSI: 0000000000000114 RDI: 0000000000000004 RBP: 00000000006dac38 R08: 00000000000000a0 R09: 0000000000000000 R10: 0000000020000380 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fffbfb36d6f R14: 00007f4d050af9c0 R15: 0000000000000005 Code: fa 48 c1 ea 03 80 3c 02 00 0f 85 cc 01 00 00 4c 8b bb 80 04 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d 7f 68 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 9c 01 00 00 4d 8b 7f 68 48 b8 00 00 00 00 00 RIP: rds_ib_get_mr+0x5c/0x230 net/rds/ib_rdma.c:544 RSP: ffff8801b059f890 ---[ end trace 7e1cea13b85473b0 ]--- Reported-by: syzbot+b51c77ef956678a65834@syzkaller.appspotmail.com Signed-off-by: Santosh Shilimkar Signed-off-by: Avinash Repaka Signed-off-by: David S. Miller --- net/rds/ib_frmr.c | 5 +++++ net/rds/ib_mr.h | 3 ++- net/rds/ib_rdma.c | 21 +++++++++++++-------- net/rds/rdma.c | 13 ++++++++----- net/rds/rds.h | 5 ++++- net/rds/send.c | 12 +++++++----- 6 files changed, 39 insertions(+), 20 deletions(-) diff --git a/net/rds/ib_frmr.c b/net/rds/ib_frmr.c index 48332a6ed738..d152e48ea371 100644 --- a/net/rds/ib_frmr.c +++ b/net/rds/ib_frmr.c @@ -344,6 +344,11 @@ struct rds_ib_mr *rds_ib_reg_frmr(struct rds_ib_device *rds_ibdev, struct rds_ib_frmr *frmr; int ret; + if (!ic) { + /* TODO: Add FRWR support for RDS_GET_MR using proxy qp*/ + return ERR_PTR(-EOPNOTSUPP); + } + do { if (ibmr) rds_ib_free_frmr(ibmr, true); diff --git a/net/rds/ib_mr.h b/net/rds/ib_mr.h index 0ea4ab017a8c..655f01d427fe 100644 --- a/net/rds/ib_mr.h +++ b/net/rds/ib_mr.h @@ -115,7 +115,8 @@ void rds_ib_get_mr_info(struct rds_ib_device *rds_ibdev, struct rds_info_rdma_connection *iinfo); void rds_ib_destroy_mr_pool(struct rds_ib_mr_pool *); void *rds_ib_get_mr(struct scatterlist *sg, unsigned long nents, - struct rds_sock *rs, u32 *key_ret); + struct rds_sock *rs, u32 *key_ret, + struct rds_connection *conn); void rds_ib_sync_mr(void *trans_private, int dir); void rds_ib_free_mr(void *trans_private, int invalidate); void rds_ib_flush_mrs(void); diff --git a/net/rds/ib_rdma.c b/net/rds/ib_rdma.c index e678699268a2..2e49a40a5e11 100644 --- a/net/rds/ib_rdma.c +++ b/net/rds/ib_rdma.c @@ -537,11 +537,12 @@ void rds_ib_flush_mrs(void) } void *rds_ib_get_mr(struct scatterlist *sg, unsigned long nents, - struct rds_sock *rs, u32 *key_ret) + struct rds_sock *rs, u32 *key_ret, + struct rds_connection *conn) { struct rds_ib_device *rds_ibdev; struct rds_ib_mr *ibmr = NULL; - struct rds_ib_connection *ic = rs->rs_conn->c_transport_data; + struct rds_ib_connection *ic = NULL; int ret; rds_ibdev = rds_ib_get_device(rs->rs_bound_addr); @@ -550,6 +551,9 @@ void *rds_ib_get_mr(struct scatterlist *sg, unsigned long nents, goto out; } + if (conn) + ic = conn->c_transport_data; + if (!rds_ibdev->mr_8k_pool || !rds_ibdev->mr_1m_pool) { ret = -ENODEV; goto out; @@ -559,17 +563,18 @@ void *rds_ib_get_mr(struct scatterlist *sg, unsigned long nents, ibmr = rds_ib_reg_frmr(rds_ibdev, ic, sg, nents, key_ret); else ibmr = rds_ib_reg_fmr(rds_ibdev, sg, nents, key_ret); - if (ibmr) - rds_ibdev = NULL; - - out: - if (!ibmr) + if (IS_ERR(ibmr)) { + ret = PTR_ERR(ibmr); pr_warn("RDS/IB: rds_ib_get_mr failed (errno=%d)\n", ret); + } else { + return ibmr; + } + out: if (rds_ibdev) rds_ib_dev_put(rds_ibdev); - return ibmr; + return ERR_PTR(ret); } void rds_ib_destroy_mr_pool(struct rds_ib_mr_pool *pool) diff --git a/net/rds/rdma.c b/net/rds/rdma.c index 634cfcb7bba6..80920e47f2c7 100644 --- a/net/rds/rdma.c +++ b/net/rds/rdma.c @@ -170,7 +170,8 @@ static int rds_pin_pages(unsigned long user_addr, unsigned int nr_pages, } static int __rds_rdma_map(struct rds_sock *rs, struct rds_get_mr_args *args, - u64 *cookie_ret, struct rds_mr **mr_ret) + u64 *cookie_ret, struct rds_mr **mr_ret, + struct rds_conn_path *cp) { struct rds_mr *mr = NULL, *found; unsigned int nr_pages; @@ -269,7 +270,8 @@ static int __rds_rdma_map(struct rds_sock *rs, struct rds_get_mr_args *args, * Note that dma_map() implies that pending writes are * flushed to RAM, so no dma_sync is needed here. */ trans_private = rs->rs_transport->get_mr(sg, nents, rs, - &mr->r_key); + &mr->r_key, + cp ? cp->cp_conn : NULL); if (IS_ERR(trans_private)) { for (i = 0 ; i < nents; i++) @@ -330,7 +332,7 @@ int rds_get_mr(struct rds_sock *rs, char __user *optval, int optlen) sizeof(struct rds_get_mr_args))) return -EFAULT; - return __rds_rdma_map(rs, &args, NULL, NULL); + return __rds_rdma_map(rs, &args, NULL, NULL, NULL); } int rds_get_mr_for_dest(struct rds_sock *rs, char __user *optval, int optlen) @@ -354,7 +356,7 @@ int rds_get_mr_for_dest(struct rds_sock *rs, char __user *optval, int optlen) new_args.cookie_addr = args.cookie_addr; new_args.flags = args.flags; - return __rds_rdma_map(rs, &new_args, NULL, NULL); + return __rds_rdma_map(rs, &new_args, NULL, NULL, NULL); } /* @@ -782,7 +784,8 @@ int rds_cmsg_rdma_map(struct rds_sock *rs, struct rds_message *rm, rm->m_rdma_cookie != 0) return -EINVAL; - return __rds_rdma_map(rs, CMSG_DATA(cmsg), &rm->m_rdma_cookie, &rm->rdma.op_rdma_mr); + return __rds_rdma_map(rs, CMSG_DATA(cmsg), &rm->m_rdma_cookie, + &rm->rdma.op_rdma_mr, rm->m_conn_path); } /* diff --git a/net/rds/rds.h b/net/rds/rds.h index f2272fb8cd45..60b3b787fbdb 100644 --- a/net/rds/rds.h +++ b/net/rds/rds.h @@ -464,6 +464,8 @@ struct rds_message { struct scatterlist *op_sg; } data; }; + + struct rds_conn_path *m_conn_path; }; /* @@ -544,7 +546,8 @@ struct rds_transport { unsigned int avail); void (*exit)(void); void *(*get_mr)(struct scatterlist *sg, unsigned long nr_sg, - struct rds_sock *rs, u32 *key_ret); + struct rds_sock *rs, u32 *key_ret, + struct rds_connection *conn); void (*sync_mr)(void *trans_private, int direction); void (*free_mr)(void *trans_private, int invalidate); void (*flush_mrs)(void); diff --git a/net/rds/send.c b/net/rds/send.c index 94c7f74909be..59f17a2335f4 100644 --- a/net/rds/send.c +++ b/net/rds/send.c @@ -1169,6 +1169,13 @@ int rds_sendmsg(struct socket *sock, struct msghdr *msg, size_t payload_len) rs->rs_conn = conn; } + if (conn->c_trans->t_mp_capable) + cpath = &conn->c_path[rds_send_mprds_hash(rs, conn)]; + else + cpath = &conn->c_path[0]; + + rm->m_conn_path = cpath; + /* Parse any control messages the user may have included. */ ret = rds_cmsg_send(rs, rm, msg, &allocated_mr); if (ret) { @@ -1192,11 +1199,6 @@ int rds_sendmsg(struct socket *sock, struct msghdr *msg, size_t payload_len) goto out; } - if (conn->c_trans->t_mp_capable) - cpath = &conn->c_path[rds_send_mprds_hash(rs, conn)]; - else - cpath = &conn->c_path[0]; - if (rds_destroy_pending(conn)) { ret = -EAGAIN; goto out; -- cgit v1.2.3 From 36e0f12bbfd3016f495904b35e41c5711707509f Mon Sep 17 00:00:00 2001 From: Taehee Yoo Date: Thu, 26 Jul 2018 23:17:03 +0900 Subject: xdp: add NULL pointer check in __xdp_return() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit rhashtable_lookup() can return NULL. so that NULL pointer check routine should be added. Fixes: 02b55e5657c3 ("xdp: add MEM_TYPE_ZERO_COPY") Signed-off-by: Taehee Yoo Acked-by: Martin KaFai Lau Acked-by: Björn Töpel Signed-off-by: Daniel Borkmann --- net/core/xdp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/core/xdp.c b/net/core/xdp.c index 9d1f22072d5d..6771f1855b96 100644 --- a/net/core/xdp.c +++ b/net/core/xdp.c @@ -345,7 +345,8 @@ static void __xdp_return(void *data, struct xdp_mem_info *mem, bool napi_direct, rcu_read_lock(); /* mem->id is valid, checked in xdp_rxq_info_reg_mem_model() */ xa = rhashtable_lookup(mem_id_ht, &mem->id, mem_id_rht_params); - xa->zc_alloc->free(xa->zc_alloc, handle); + if (!WARN_ON_ONCE(!xa)) + xa->zc_alloc->free(xa->zc_alloc, handle); rcu_read_unlock(); default: /* Not possible, checked in xdp_rxq_info_reg_mem_model() */ -- cgit v1.2.3 From 5f300e8004cb80182a24c0fa488218a4a43e6aac Mon Sep 17 00:00:00 2001 From: Martin KaFai Lau Date: Thu, 26 Jul 2018 09:57:59 -0700 Subject: bpf: btf: Use exact btf value_size match in map_check_btf() The current map_check_btf() in BPF_MAP_TYPE_ARRAY rejects '> map->value_size' to ensure map_seq_show_elem() will not access things beyond an array element. Yonghong suggested that using '!=' is a more correct check. The 8 bytes round_up on value_size is stored in array->elem_size. Hence, using '!=' on map->value_size is a proper check. This patch also adds new tests to check the btf array key type and value type. Two of these new tests verify the btf's value_size (the change in this patch). It also fixes two existing tests that wrongly encoded a btf's type size (pprint_test) and the value_type_id (in one of the raw_tests[]). However, that do not affect these two BTF verification tests before or after this test changes. These two tests mainly failed at array creation time after this patch. Fixes: a26ca7c982cb ("bpf: btf: Add pretty print support to the basic arraymap") Suggested-by: Yonghong Song Acked-by: Yonghong Song Signed-off-by: Martin KaFai Lau Signed-off-by: Daniel Borkmann --- kernel/bpf/arraymap.c | 2 +- tools/testing/selftests/bpf/test_btf.c | 86 +++++++++++++++++++++++++++++++++- 2 files changed, 85 insertions(+), 3 deletions(-) diff --git a/kernel/bpf/arraymap.c b/kernel/bpf/arraymap.c index 544e58f5f642..2aa55d030c77 100644 --- a/kernel/bpf/arraymap.c +++ b/kernel/bpf/arraymap.c @@ -378,7 +378,7 @@ static int array_map_check_btf(const struct bpf_map *map, const struct btf *btf, return -EINVAL; value_type = btf_type_id_size(btf, &btf_value_id, &value_size); - if (!value_type || value_size > map->value_size) + if (!value_type || value_size != map->value_size) return -EINVAL; return 0; diff --git a/tools/testing/selftests/bpf/test_btf.c b/tools/testing/selftests/bpf/test_btf.c index 402c0f7cc418..ffdd27737c9e 100644 --- a/tools/testing/selftests/bpf/test_btf.c +++ b/tools/testing/selftests/bpf/test_btf.c @@ -507,7 +507,7 @@ static struct btf_raw_test raw_tests[] = { .key_size = sizeof(int), .value_size = sizeof(void *) * 4, .key_type_id = 1, - .value_type_id = 4, + .value_type_id = 5, .max_entries = 4, }, @@ -1292,6 +1292,88 @@ static struct btf_raw_test raw_tests[] = { .err_str = "type != 0", }, +{ + .descr = "arraymap invalid btf key (a bit field)", + .raw_types = { + /* int */ /* [1] */ + BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4), + /* 32 bit int with 32 bit offset */ /* [2] */ + BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 32, 32, 8), + BTF_END_RAW, + }, + .str_sec = "", + .str_sec_size = sizeof(""), + .map_type = BPF_MAP_TYPE_ARRAY, + .map_name = "array_map_check_btf", + .key_size = sizeof(int), + .value_size = sizeof(int), + .key_type_id = 2, + .value_type_id = 1, + .max_entries = 4, + .map_create_err = true, +}, + +{ + .descr = "arraymap invalid btf key (!= 32 bits)", + .raw_types = { + /* int */ /* [1] */ + BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4), + /* 16 bit int with 0 bit offset */ /* [2] */ + BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 16, 2), + BTF_END_RAW, + }, + .str_sec = "", + .str_sec_size = sizeof(""), + .map_type = BPF_MAP_TYPE_ARRAY, + .map_name = "array_map_check_btf", + .key_size = sizeof(int), + .value_size = sizeof(int), + .key_type_id = 2, + .value_type_id = 1, + .max_entries = 4, + .map_create_err = true, +}, + +{ + .descr = "arraymap invalid btf value (too small)", + .raw_types = { + /* int */ /* [1] */ + BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4), + BTF_END_RAW, + }, + .str_sec = "", + .str_sec_size = sizeof(""), + .map_type = BPF_MAP_TYPE_ARRAY, + .map_name = "array_map_check_btf", + .key_size = sizeof(int), + /* btf_value_size < map->value_size */ + .value_size = sizeof(__u64), + .key_type_id = 1, + .value_type_id = 1, + .max_entries = 4, + .map_create_err = true, +}, + +{ + .descr = "arraymap invalid btf value (too big)", + .raw_types = { + /* int */ /* [1] */ + BTF_TYPE_INT_ENC(0, BTF_INT_SIGNED, 0, 32, 4), + BTF_END_RAW, + }, + .str_sec = "", + .str_sec_size = sizeof(""), + .map_type = BPF_MAP_TYPE_ARRAY, + .map_name = "array_map_check_btf", + .key_size = sizeof(int), + /* btf_value_size > map->value_size */ + .value_size = sizeof(__u16), + .key_type_id = 1, + .value_type_id = 1, + .max_entries = 4, + .map_create_err = true, +}, + }; /* struct btf_raw_test raw_tests[] */ static const char *get_next_str(const char *start, const char *end) @@ -2051,7 +2133,7 @@ static struct btf_raw_test pprint_test = { BTF_ENUM_ENC(NAME_TBD, 2), BTF_ENUM_ENC(NAME_TBD, 3), /* struct pprint_mapv */ /* [16] */ - BTF_TYPE_ENC(NAME_TBD, BTF_INFO_ENC(BTF_KIND_STRUCT, 0, 8), 28), + BTF_TYPE_ENC(NAME_TBD, BTF_INFO_ENC(BTF_KIND_STRUCT, 0, 8), 32), BTF_MEMBER_ENC(NAME_TBD, 11, 0), /* uint32_t ui32 */ BTF_MEMBER_ENC(NAME_TBD, 10, 32), /* uint16_t ui16 */ BTF_MEMBER_ENC(NAME_TBD, 12, 64), /* int32_t si32 */ -- cgit v1.2.3 From b512719f771a82180211c9a315b8a7f628832b3d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 26 Jul 2018 16:37:08 -0700 Subject: delayacct: fix crash in delayacct_blkio_end() after delayacct init failure While forking, if delayacct init fails due to memory shortage, it continues expecting all delayacct users to check task->delays pointer against NULL before dereferencing it, which all of them used to do. Commit c96f5471ce7d ("delayacct: Account blkio completion on the correct task"), while updating delayacct_blkio_end() to take the target task instead of always using %current, made the function test NULL on %current->delays and then continue to operated on @p->delays. If %current succeeded init while @p didn't, it leads to the following crash. BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 IP: __delayacct_blkio_end+0xc/0x40 PGD 8000001fd07e1067 P4D 8000001fd07e1067 PUD 1fcffbb067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 4 PID: 25774 Comm: QIOThread0 Not tainted 4.16.0-9_fbk1_rc2_1180_g6b593215b4d7 #9 RIP: 0010:__delayacct_blkio_end+0xc/0x40 Call Trace: try_to_wake_up+0x2c0/0x600 autoremove_wake_function+0xe/0x30 __wake_up_common+0x74/0x120 wake_up_page_bit+0x9c/0xe0 mpage_end_io+0x27/0x70 blk_update_request+0x78/0x2c0 scsi_end_request+0x2c/0x1e0 scsi_io_completion+0x20b/0x5f0 blk_mq_complete_request+0xa2/0x100 ata_scsi_qc_complete+0x79/0x400 ata_qc_complete_multiple+0x86/0xd0 ahci_handle_port_interrupt+0xc9/0x5c0 ahci_handle_port_intr+0x54/0xb0 ahci_single_level_irq_intr+0x3b/0x60 __handle_irq_event_percpu+0x43/0x190 handle_irq_event_percpu+0x20/0x50 handle_irq_event+0x2a/0x50 handle_edge_irq+0x80/0x1c0 handle_irq+0xaf/0x120 do_IRQ+0x41/0xc0 common_interrupt+0xf/0xf Fix it by updating delayacct_blkio_end() check @p->delays instead. Link: http://lkml.kernel.org/r/20180724175542.GP1934745@devbig577.frc2.facebook.com Fixes: c96f5471ce7d ("delayacct: Account blkio completion on the correct task") Signed-off-by: Tejun Heo Reported-by: Dave Jones Debugged-by: Dave Jones Reviewed-by: Andrew Morton Cc: Josh Snyder Cc: [4.15+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/delayacct.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/delayacct.h b/include/linux/delayacct.h index e6c0448ebcc7..31c865d1842e 100644 --- a/include/linux/delayacct.h +++ b/include/linux/delayacct.h @@ -124,7 +124,7 @@ static inline void delayacct_blkio_start(void) static inline void delayacct_blkio_end(struct task_struct *p) { - if (current->delays) + if (p->delays) __delayacct_blkio_end(p); delayacct_clear_flag(DELAYACCT_PF_BLKIO); } -- cgit v1.2.3 From 03758dbbe2b5c0627b361ad5b4a2c60f9964ccde Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 26 Jul 2018 16:37:12 -0700 Subject: kasan: only select SLUB_DEBUG with SYSFS=y Building with KASAN and SLUB but without sysfs now results in a build-time error: WARNING: unmet direct dependencies detected for SLUB_DEBUG Depends on [n]: SLUB [=y] && SYSFS [=n] Selected by [y]: - KASAN [=y] && HAVE_ARCH_KASAN [=y] && (SLUB [=y] || SLAB [=n] && !DEBUG_SLAB [=n]) && SLUB [=y] mm/slub.c:4565:12: error: 'list_locations' defined but not used [-Werror=unused-function] static int list_locations(struct kmem_cache *s, char *buf, ^~~~~~~~~~~~~~ mm/slub.c:4406:13: error: 'validate_slab_cache' defined but not used [-Werror=unused-function] static long validate_slab_cache(struct kmem_cache *s) This disallows that broken configuration in Kconfig. Link: http://lkml.kernel.org/r/20180709154019.1693026-1-arnd@arndb.de Fixes: dd275caf4a0d ("kasan: depend on CONFIG_SLUB_DEBUG") Signed-off-by: Arnd Bergmann Cc: "Jason A. Donenfeld" Cc: Arnd Bergmann Cc: Shakeel Butt Cc: Andrey Ryabinin Cc: Christoph Lameter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- lib/Kconfig.kasan | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/Kconfig.kasan b/lib/Kconfig.kasan index c253c1b46c6b..befb127507c0 100644 --- a/lib/Kconfig.kasan +++ b/lib/Kconfig.kasan @@ -5,7 +5,7 @@ if HAVE_ARCH_KASAN config KASAN bool "KASan: runtime memory debugger" - depends on SLUB || (SLAB && !DEBUG_SLAB) + depends on (SLUB && SYSFS) || (SLAB && !DEBUG_SLAB) select SLUB_DEBUG if SLUB select CONSTRUCTORS select STACKDEPOT -- cgit v1.2.3 From 15d36fecd0bdc7510b70a0e5ec6671140b3fce0c Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Thu, 26 Jul 2018 16:37:15 -0700 Subject: mm: disallow mappings that conflict for devm_memremap_pages() When pmem namespaces created are smaller than section size, this can cause an issue during removal and gpf was observed: general protection fault: 0000 1 SMP PTI CPU: 36 PID: 3941 Comm: ndctl Tainted: G W 4.14.28-1.el7uek.x86_64 #2 task: ffff88acda150000 task.stack: ffffc900233a4000 RIP: 0010:__put_page+0x56/0x79 Call Trace: devm_memremap_pages_release+0x155/0x23a release_nodes+0x21e/0x260 devres_release_all+0x3c/0x48 device_release_driver_internal+0x15c/0x207 device_release_driver+0x12/0x14 unbind_store+0xba/0xd8 drv_attr_store+0x27/0x31 sysfs_kf_write+0x3f/0x46 kernfs_fop_write+0x10f/0x18b __vfs_write+0x3a/0x16d vfs_write+0xb2/0x1a1 SyS_write+0x55/0xb9 do_syscall_64+0x79/0x1ae entry_SYSCALL_64_after_hwframe+0x3d/0x0 Add code to check whether we have a mapping already in the same section and prevent additional mappings from being created if that is the case. Link: http://lkml.kernel.org/r/152909478401.50143.312364396244072931.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Dave Jiang Cc: Dan Williams Cc: Robert Elliott Cc: Jeff Moyer Cc: Matthew Wilcox Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/memremap.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/kernel/memremap.c b/kernel/memremap.c index 5857267a4af5..a734b1747466 100644 --- a/kernel/memremap.c +++ b/kernel/memremap.c @@ -176,10 +176,27 @@ void *devm_memremap_pages(struct device *dev, struct dev_pagemap *pgmap) unsigned long pfn, pgoff, order; pgprot_t pgprot = PAGE_KERNEL; int error, nid, is_ram; + struct dev_pagemap *conflict_pgmap; align_start = res->start & ~(SECTION_SIZE - 1); align_size = ALIGN(res->start + resource_size(res), SECTION_SIZE) - align_start; + align_end = align_start + align_size - 1; + + conflict_pgmap = get_dev_pagemap(PHYS_PFN(align_start), NULL); + if (conflict_pgmap) { + dev_WARN(dev, "Conflicting mapping in same section\n"); + put_dev_pagemap(conflict_pgmap); + return ERR_PTR(-ENOMEM); + } + + conflict_pgmap = get_dev_pagemap(PHYS_PFN(align_end), NULL); + if (conflict_pgmap) { + dev_WARN(dev, "Conflicting mapping in same section\n"); + put_dev_pagemap(conflict_pgmap); + return ERR_PTR(-ENOMEM); + } + is_ram = region_intersects(align_start, align_size, IORESOURCE_SYSTEM_RAM, IORES_DESC_NONE); @@ -199,7 +216,6 @@ void *devm_memremap_pages(struct device *dev, struct dev_pagemap *pgmap) mutex_lock(&pgmap_lock); error = 0; - align_end = align_start + align_size - 1; foreach_order_pgoff(res, order, pgoff) { error = __radix_tree_insert(&pgmap_radix, -- cgit v1.2.3 From f075faa300acc4f6301e348acde0a4580ed5f77c Mon Sep 17 00:00:00 2001 From: Davidlohr Bueso Date: Thu, 26 Jul 2018 16:37:19 -0700 Subject: ipc/sem.c: prevent queue.status tearing in semop In order for load/store tearing prevention to work, _all_ accesses to the variable in question need to be done around READ and WRITE_ONCE() macros. Ensure everyone does so for q->status variable for semtimedop(). Link: http://lkml.kernel.org/r/20180717052654.676-1-dave@stgolabs.net Signed-off-by: Davidlohr Bueso Cc: Manfred Spraul Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- ipc/sem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/ipc/sem.c b/ipc/sem.c index 5af1943ad782..76e95e4f3aa2 100644 --- a/ipc/sem.c +++ b/ipc/sem.c @@ -2118,7 +2118,7 @@ static long do_semtimedop(int semid, struct sembuf __user *tsops, } do { - queue.status = -EINTR; + WRITE_ONCE(queue.status, -EINTR); queue.sleeper = current; __set_current_state(TASK_INTERRUPTIBLE); -- cgit v1.2.3 From 31c5bda3a656089f01963d290a40ccda181f816e Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 26 Jul 2018 16:37:22 -0700 Subject: mm: fix exports that inadvertently make put_page() EXPORT_SYMBOL_GPL MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit e76384884344 ("mm: introduce MEMORY_DEVICE_FS_DAX and CONFIG_DEV_PAGEMAP_OPS") added two EXPORT_SYMBOL_GPL() symbols, but these symbols are required by the inlined put_page(), thus accidentally making put_page() a GPL export only. This breaks OpenAFS (at least). Mark them EXPORT_SYMBOL() instead. Link: http://lkml.kernel.org/r/153128611970.2928.11310692420711601254.stgit@dwillia2-desk3.amr.corp.intel.com Fixes: e76384884344 ("mm: introduce MEMORY_DEVICE_FS_DAX and CONFIG_DEV_PAGEMAP_OPS") Signed-off-by: Dan Williams Reported-by: Joe Gorse Reported-by: John Hubbard Tested-by: Joe Gorse Tested-by: John Hubbard Cc: Jérôme Glisse Cc: Mark Vitale Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/memremap.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/memremap.c b/kernel/memremap.c index a734b1747466..38283363da06 100644 --- a/kernel/memremap.c +++ b/kernel/memremap.c @@ -321,7 +321,7 @@ EXPORT_SYMBOL_GPL(get_dev_pagemap); #ifdef CONFIG_DEV_PAGEMAP_OPS DEFINE_STATIC_KEY_FALSE(devmap_managed_key); -EXPORT_SYMBOL_GPL(devmap_managed_key); +EXPORT_SYMBOL(devmap_managed_key); static atomic_t devmap_enable; /* @@ -362,5 +362,5 @@ void __put_devmap_managed_page(struct page *page) } else if (!count) __put_page(page); } -EXPORT_SYMBOL_GPL(__put_devmap_managed_page); +EXPORT_SYMBOL(__put_devmap_managed_page); #endif /* CONFIG_DEV_PAGEMAP_OPS */ -- cgit v1.2.3 From 027232da7c7c1c7f04383f93bd798e475dde5285 Mon Sep 17 00:00:00 2001 From: "Kirill A. Shutemov" Date: Thu, 26 Jul 2018 16:37:25 -0700 Subject: mm: introduce vma_init() Not all VMAs allocated with vm_area_alloc(). Some of them allocated on stack or in data segment. The new helper can be use to initialize VMA properly regardless where it was allocated. Link: http://lkml.kernel.org/r/20180724121139.62570-2-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov Acked-by: Linus Torvalds Reviewed-by: Andrew Morton Cc: Dmitry Vyukov Cc: Oleg Nesterov Cc: Andrea Arcangeli Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mm.h | 6 ++++++ kernel/fork.c | 6 ++---- 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/include/linux/mm.h b/include/linux/mm.h index d3a3842316b8..31540f166987 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -452,6 +452,12 @@ struct vm_operations_struct { unsigned long addr); }; +static inline void vma_init(struct vm_area_struct *vma, struct mm_struct *mm) +{ + vma->vm_mm = mm; + INIT_LIST_HEAD(&vma->anon_vma_chain); +} + struct mmu_gather; struct inode; diff --git a/kernel/fork.c b/kernel/fork.c index a191c05e757d..1b27babc4c78 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -312,10 +312,8 @@ struct vm_area_struct *vm_area_alloc(struct mm_struct *mm) { struct vm_area_struct *vma = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL); - if (vma) { - vma->vm_mm = mm; - INIT_LIST_HEAD(&vma->anon_vma_chain); - } + if (vma) + vma_init(vma, mm); return vma; } -- cgit v1.2.3 From 2c4541e24c55e2847bede93e33d749280edd429a Mon Sep 17 00:00:00 2001 From: "Kirill A. Shutemov" Date: Thu, 26 Jul 2018 16:37:30 -0700 Subject: mm: use vma_init() to initialize VMAs on stack and data segments Make sure to initialize all VMAs properly, not only those which come from vm_area_cachep. Link: http://lkml.kernel.org/r/20180724121139.62570-3-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov Acked-by: Linus Torvalds Reviewed-by: Andrew Morton Cc: Dmitry Vyukov Cc: Oleg Nesterov Cc: Andrea Arcangeli Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/arm/kernel/process.c | 1 + arch/arm/mach-rpc/ecard.c | 2 +- arch/arm64/include/asm/tlb.h | 4 +++- arch/arm64/mm/hugetlbpage.c | 7 +++++-- arch/ia64/include/asm/tlb.h | 2 +- arch/ia64/mm/init.c | 2 +- arch/x86/um/mem_32.c | 2 +- fs/hugetlbfs/inode.c | 2 ++ mm/mempolicy.c | 1 + mm/shmem.c | 1 + 10 files changed, 17 insertions(+), 7 deletions(-) diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 225d1c58d2de..d9c299133111 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -338,6 +338,7 @@ static struct vm_area_struct gate_vma = { static int __init gate_vma_init(void) { + vma_init(&gate_vma, NULL); gate_vma.vm_page_prot = PAGE_READONLY_EXEC; return 0; } diff --git a/arch/arm/mach-rpc/ecard.c b/arch/arm/mach-rpc/ecard.c index 39aef4876ed4..8db62cc54a6a 100644 --- a/arch/arm/mach-rpc/ecard.c +++ b/arch/arm/mach-rpc/ecard.c @@ -237,8 +237,8 @@ static void ecard_init_pgtables(struct mm_struct *mm) memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (EASI_SIZE / PGDIR_SIZE)); + vma_init(&vma, mm); vma.vm_flags = VM_EXEC; - vma.vm_mm = mm; flush_tlb_range(&vma, IO_START, IO_START + IO_SIZE); flush_tlb_range(&vma, EASI_START, EASI_START + EASI_SIZE); diff --git a/arch/arm64/include/asm/tlb.h b/arch/arm64/include/asm/tlb.h index ffdaea7954bb..d87f2d646caa 100644 --- a/arch/arm64/include/asm/tlb.h +++ b/arch/arm64/include/asm/tlb.h @@ -37,7 +37,9 @@ static inline void __tlb_remove_table(void *_table) static inline void tlb_flush(struct mmu_gather *tlb) { - struct vm_area_struct vma = { .vm_mm = tlb->mm, }; + struct vm_area_struct vma; + + vma_init(&vma, tlb->mm); /* * The ASID allocator will either invalidate the ASID or mark diff --git a/arch/arm64/mm/hugetlbpage.c b/arch/arm64/mm/hugetlbpage.c index ecc6818191df..1854e49aa18a 100644 --- a/arch/arm64/mm/hugetlbpage.c +++ b/arch/arm64/mm/hugetlbpage.c @@ -108,11 +108,13 @@ static pte_t get_clear_flush(struct mm_struct *mm, unsigned long pgsize, unsigned long ncontig) { - struct vm_area_struct vma = { .vm_mm = mm }; + struct vm_area_struct vma; pte_t orig_pte = huge_ptep_get(ptep); bool valid = pte_valid(orig_pte); unsigned long i, saddr = addr; + vma_init(&vma, mm); + for (i = 0; i < ncontig; i++, addr += pgsize, ptep++) { pte_t pte = ptep_get_and_clear(mm, addr, ptep); @@ -145,9 +147,10 @@ static void clear_flush(struct mm_struct *mm, unsigned long pgsize, unsigned long ncontig) { - struct vm_area_struct vma = { .vm_mm = mm }; + struct vm_area_struct vma; unsigned long i, saddr = addr; + vma_init(&vma, mm); for (i = 0; i < ncontig; i++, addr += pgsize, ptep++) pte_clear(mm, addr, ptep); diff --git a/arch/ia64/include/asm/tlb.h b/arch/ia64/include/asm/tlb.h index 44f0ac0df308..db89e7306081 100644 --- a/arch/ia64/include/asm/tlb.h +++ b/arch/ia64/include/asm/tlb.h @@ -120,7 +120,7 @@ ia64_tlb_flush_mmu_tlbonly(struct mmu_gather *tlb, unsigned long start, unsigned */ struct vm_area_struct vma; - vma.vm_mm = tlb->mm; + vma_init(&vma, tlb->mm); /* flush the address range from the tlb: */ flush_tlb_range(&vma, start, end); /* now flush the virt. page-table area mapping the address range: */ diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c index bdb14a369137..e6c6dfd98de2 100644 --- a/arch/ia64/mm/init.c +++ b/arch/ia64/mm/init.c @@ -273,7 +273,7 @@ static struct vm_area_struct gate_vma; static int __init gate_vma_init(void) { - gate_vma.vm_mm = NULL; + vma_init(&gate_vma, NULL); gate_vma.vm_start = FIXADDR_USER_START; gate_vma.vm_end = FIXADDR_USER_END; gate_vma.vm_flags = VM_READ | VM_MAYREAD | VM_EXEC | VM_MAYEXEC; diff --git a/arch/x86/um/mem_32.c b/arch/x86/um/mem_32.c index 744afdc18cf3..56c44d865f7b 100644 --- a/arch/x86/um/mem_32.c +++ b/arch/x86/um/mem_32.c @@ -16,7 +16,7 @@ static int __init gate_vma_init(void) if (!FIXADDR_USER_START) return 0; - gate_vma.vm_mm = NULL; + vma_init(&gate_vma, NULL); gate_vma.vm_start = FIXADDR_USER_START; gate_vma.vm_end = FIXADDR_USER_END; gate_vma.vm_flags = VM_READ | VM_MAYREAD | VM_EXEC | VM_MAYEXEC; diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c index d508c7844681..40d4c66c7751 100644 --- a/fs/hugetlbfs/inode.c +++ b/fs/hugetlbfs/inode.c @@ -411,6 +411,7 @@ static void remove_inode_hugepages(struct inode *inode, loff_t lstart, bool truncate_op = (lend == LLONG_MAX); memset(&pseudo_vma, 0, sizeof(struct vm_area_struct)); + vma_init(&pseudo_vma, current->mm); pseudo_vma.vm_flags = (VM_HUGETLB | VM_MAYSHARE | VM_SHARED); pagevec_init(&pvec); next = start; @@ -595,6 +596,7 @@ static long hugetlbfs_fallocate(struct file *file, int mode, loff_t offset, * as input to create an allocation policy. */ memset(&pseudo_vma, 0, sizeof(struct vm_area_struct)); + vma_init(&pseudo_vma, mm); pseudo_vma.vm_flags = (VM_HUGETLB | VM_MAYSHARE | VM_SHARED); pseudo_vma.vm_file = file; diff --git a/mm/mempolicy.c b/mm/mempolicy.c index 9ac49ef17b4e..01f1a14facc4 100644 --- a/mm/mempolicy.c +++ b/mm/mempolicy.c @@ -2505,6 +2505,7 @@ void mpol_shared_policy_init(struct shared_policy *sp, struct mempolicy *mpol) /* Create pseudo-vma that contains just the policy */ memset(&pvma, 0, sizeof(struct vm_area_struct)); + vma_init(&pvma, NULL); pvma.vm_end = TASK_SIZE; /* policy covers entire file */ mpol_set_shared_policy(sp, &pvma, new); /* adds ref */ diff --git a/mm/shmem.c b/mm/shmem.c index 2cab84403055..41b9bbf24e16 100644 --- a/mm/shmem.c +++ b/mm/shmem.c @@ -1421,6 +1421,7 @@ static void shmem_pseudo_vma_init(struct vm_area_struct *vma, { /* Create a pseudo vma that just contains the policy */ memset(vma, 0, sizeof(*vma)); + vma_init(vma, NULL); /* Bias interleave by inode number to distribute better across nodes */ vma->vm_pgoff = index + info->vfs_inode.i_ino; vma->vm_policy = mpol_shared_policy_lookup(&info->policy, index); -- cgit v1.2.3 From bfd40eaff5abb9f62c8ef94ca13ed0d94a560f10 Mon Sep 17 00:00:00 2001 From: "Kirill A. Shutemov" Date: Thu, 26 Jul 2018 16:37:35 -0700 Subject: mm: fix vma_is_anonymous() false-positives vma_is_anonymous() relies on ->vm_ops being NULL to detect anonymous VMA. This is unreliable as ->mmap may not set ->vm_ops. False-positive vma_is_anonymous() may lead to crashes: next ffff8801ce5e7040 prev ffff8801d20eca50 mm ffff88019c1e13c0 prot 27 anon_vma ffff88019680cdd8 vm_ops 0000000000000000 pgoff 0 file ffff8801b2ec2d00 private_data 0000000000000000 flags: 0xff(read|write|exec|shared|mayread|maywrite|mayexec|mayshare) ------------[ cut here ]------------ kernel BUG at mm/memory.c:1422! invalid opcode: 0000 [#1] SMP KASAN CPU: 0 PID: 18486 Comm: syz-executor3 Not tainted 4.18.0-rc3+ #136 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:zap_pmd_range mm/memory.c:1421 [inline] RIP: 0010:zap_pud_range mm/memory.c:1466 [inline] RIP: 0010:zap_p4d_range mm/memory.c:1487 [inline] RIP: 0010:unmap_page_range+0x1c18/0x2220 mm/memory.c:1508 Call Trace: unmap_single_vma+0x1a0/0x310 mm/memory.c:1553 zap_page_range_single+0x3cc/0x580 mm/memory.c:1644 unmap_mapping_range_vma mm/memory.c:2792 [inline] unmap_mapping_range_tree mm/memory.c:2813 [inline] unmap_mapping_pages+0x3a7/0x5b0 mm/memory.c:2845 unmap_mapping_range+0x48/0x60 mm/memory.c:2880 truncate_pagecache+0x54/0x90 mm/truncate.c:800 truncate_setsize+0x70/0xb0 mm/truncate.c:826 simple_setattr+0xe9/0x110 fs/libfs.c:409 notify_change+0xf13/0x10f0 fs/attr.c:335 do_truncate+0x1ac/0x2b0 fs/open.c:63 do_sys_ftruncate+0x492/0x560 fs/open.c:205 __do_sys_ftruncate fs/open.c:215 [inline] __se_sys_ftruncate fs/open.c:213 [inline] __x64_sys_ftruncate+0x59/0x80 fs/open.c:213 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Reproducer: #include #include #include #include #include #include #include #include #include #include #include #define KCOV_INIT_TRACE _IOR('c', 1, unsigned long) #define KCOV_ENABLE _IO('c', 100) #define KCOV_DISABLE _IO('c', 101) #define COVER_SIZE (1024<<10) #define KCOV_TRACE_PC 0 #define KCOV_TRACE_CMP 1 int main(int argc, char **argv) { int fd; unsigned long *cover; system("mount -t debugfs none /sys/kernel/debug"); fd = open("/sys/kernel/debug/kcov", O_RDWR); ioctl(fd, KCOV_INIT_TRACE, COVER_SIZE); cover = mmap(NULL, COVER_SIZE * sizeof(unsigned long), PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); munmap(cover, COVER_SIZE * sizeof(unsigned long)); cover = mmap(NULL, COVER_SIZE * sizeof(unsigned long), PROT_READ | PROT_WRITE, MAP_PRIVATE, fd, 0); memset(cover, 0, COVER_SIZE * sizeof(unsigned long)); ftruncate(fd, 3UL << 20); return 0; } This can be fixed by assigning anonymous VMAs own vm_ops and not relying on it being NULL. If ->mmap() failed to set ->vm_ops, mmap_region() will set it to dummy_vm_ops. This way we will have non-NULL ->vm_ops for all VMAs. Link: http://lkml.kernel.org/r/20180724121139.62570-4-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov Reported-by: syzbot+3f84280d52be9b7083cc@syzkaller.appspotmail.com Acked-by: Linus Torvalds Reviewed-by: Andrew Morton Cc: Dmitry Vyukov Cc: Oleg Nesterov Cc: Andrea Arcangeli Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/mem.c | 1 + fs/exec.c | 1 + include/linux/mm.h | 8 ++++++++ mm/mmap.c | 3 +++ mm/nommu.c | 2 ++ 5 files changed, 15 insertions(+) diff --git a/drivers/char/mem.c b/drivers/char/mem.c index ffeb60d3434c..df66a9dd0aae 100644 --- a/drivers/char/mem.c +++ b/drivers/char/mem.c @@ -708,6 +708,7 @@ static int mmap_zero(struct file *file, struct vm_area_struct *vma) #endif if (vma->vm_flags & VM_SHARED) return shmem_zero_setup(vma); + vma_set_anonymous(vma); return 0; } diff --git a/fs/exec.c b/fs/exec.c index 72e961a62adb..bdd0eacefdf5 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -293,6 +293,7 @@ static int __bprm_mm_init(struct linux_binprm *bprm) bprm->vma = vma = vm_area_alloc(mm); if (!vma) return -ENOMEM; + vma_set_anonymous(vma); if (down_write_killable(&mm->mmap_sem)) { err = -EINTR; diff --git a/include/linux/mm.h b/include/linux/mm.h index 31540f166987..7ba6d356d18f 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -454,10 +454,18 @@ struct vm_operations_struct { static inline void vma_init(struct vm_area_struct *vma, struct mm_struct *mm) { + static const struct vm_operations_struct dummy_vm_ops = {}; + vma->vm_mm = mm; + vma->vm_ops = &dummy_vm_ops; INIT_LIST_HEAD(&vma->anon_vma_chain); } +static inline void vma_set_anonymous(struct vm_area_struct *vma) +{ + vma->vm_ops = NULL; +} + struct mmu_gather; struct inode; diff --git a/mm/mmap.c b/mm/mmap.c index ff1944d8d458..17bbf4d3e24f 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -1778,6 +1778,8 @@ unsigned long mmap_region(struct file *file, unsigned long addr, error = shmem_zero_setup(vma); if (error) goto free_vma; + } else { + vma_set_anonymous(vma); } vma_link(mm, vma, prev, rb_link, rb_parent); @@ -2983,6 +2985,7 @@ static int do_brk_flags(unsigned long addr, unsigned long len, unsigned long fla return -ENOMEM; } + vma_set_anonymous(vma); vma->vm_start = addr; vma->vm_end = addr + len; vma->vm_pgoff = pgoff; diff --git a/mm/nommu.c b/mm/nommu.c index 1d22fdbf7d7c..9fc9e43335b6 100644 --- a/mm/nommu.c +++ b/mm/nommu.c @@ -1145,6 +1145,8 @@ static int do_mmap_private(struct vm_area_struct *vma, if (ret < len) memset(base + ret, 0, len - ret); + } else { + vma_set_anonymous(vma); } return 0; -- cgit v1.2.3 From fa3fc2ad99b4f025446d1cff589a8d2dd7db92f2 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 26 Jul 2018 16:37:38 -0700 Subject: include/linux/eventfd.h: include linux/errno.h The new gasket staging driver ran into a randconfig build failure when CONFIG_EVENTFD is disabled: In file included from drivers/staging/gasket/gasket_interrupt.h:11, from drivers/staging/gasket/gasket_interrupt.c:4: include/linux/eventfd.h: In function 'eventfd_ctx_fdget': include/linux/eventfd.h:51:9: error: implicit declaration of function 'ERR_PTR' [-Werror=implicit-function-declaration] I can't see anything wrong with including eventfd.h before err.h, so the easiest fix is to make it possible to do this by including the file where it is needed. Link: http://lkml.kernel.org/r/20180724110737.3985088-1-arnd@arndb.de Fixes: 9a69f5087ccc ("drivers/staging: Gasket driver framework + Apex driver") Signed-off-by: Arnd Bergmann Cc: Eric Biggers Cc: Al Viro Cc: Greg Kroah-Hartman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/eventfd.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/eventfd.h b/include/linux/eventfd.h index 7094718b653b..ffcc7724ca21 100644 --- a/include/linux/eventfd.h +++ b/include/linux/eventfd.h @@ -11,6 +11,7 @@ #include #include +#include /* * CAREFUL: Check include/uapi/asm-generic/fcntl.h when defining -- cgit v1.2.3 From 16e536ef47f567289a5699abee9ff7bb304bc12d Mon Sep 17 00:00:00 2001 From: Li Wang Date: Thu, 26 Jul 2018 16:37:42 -0700 Subject: zswap: re-check zswap_is_full() after do zswap_shrink() /sys/../zswap/stored_pages keeps rising in a zswap test with "zswap.max_pool_percent=0" parameter. But it should not compress or store pages any more since there is no space in the compressed pool. Reproduce steps: 1. Boot kernel with "zswap.enabled=1" 2. Set the max_pool_percent to 0 # echo 0 > /sys/module/zswap/parameters/max_pool_percent 3. Do memory stress test to see if some pages have been compressed # stress --vm 1 --vm-bytes $mem_available"M" --timeout 60s 4. Watching the 'stored_pages' number increasing or not The root cause is: When zswap_max_pool_percent is set to 0 via kernel parameter, zswap_is_full() will always return true due to zswap_shrink(). But if the shinking is able to reclain a page successfully the code then proceeds to compressing/storing another page, so the value of stored_pages will keep changing. To solve the issue, this patch adds a zswap_is_full() check again after zswap_shrink() to make sure it's now under the max_pool_percent, and to not compress/store if we reached the limit. Link: http://lkml.kernel.org/r/20180530103936.17812-1-liwang@redhat.com Signed-off-by: Li Wang Acked-by: Dan Streetman Cc: Seth Jennings Cc: Huang Ying Cc: Yu Zhao Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/zswap.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/mm/zswap.c b/mm/zswap.c index 7d34e69507e3..cd91fd9d96b8 100644 --- a/mm/zswap.c +++ b/mm/zswap.c @@ -1026,6 +1026,15 @@ static int zswap_frontswap_store(unsigned type, pgoff_t offset, ret = -ENOMEM; goto reject; } + + /* A second zswap_is_full() check after + * zswap_shrink() to make sure it's now + * under the max_pool_percent + */ + if (zswap_is_full()) { + ret = -ENOMEM; + goto reject; + } } /* allocate entry */ -- cgit v1.2.3 From d97e5e6160c0e0a23963ec198c7cb1c69e6bf9e8 Mon Sep 17 00:00:00 2001 From: Shakeel Butt Date: Thu, 26 Jul 2018 16:37:45 -0700 Subject: kvm, mm: account shadow page tables to kmemcg MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The size of kvm's shadow page tables corresponds to the size of the guest virtual machines on the system. Large VMs can spend a significant amount of memory as shadow page tables which can not be left as system memory overhead. So, account shadow page tables to the kmemcg. [shakeelb@google.com: replace (GFP_KERNEL|__GFP_ACCOUNT) with GFP_KERNEL_ACCOUNT] Link: http://lkml.kernel.org/r/20180629140224.205849-1-shakeelb@google.com Link: http://lkml.kernel.org/r/20180627181349.149778-1-shakeelb@google.com Signed-off-by: Shakeel Butt Cc: Michal Hocko Cc: Johannes Weiner Cc: Vladimir Davydov Cc: Paolo Bonzini Cc: Greg Thelen Cc: Radim Krčmář Cc: Peter Feiner Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86/kvm/mmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index d594690d8b95..6b8f11521c41 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -890,7 +890,7 @@ static int mmu_topup_memory_cache_page(struct kvm_mmu_memory_cache *cache, if (cache->nobjs >= min) return 0; while (cache->nobjs < ARRAY_SIZE(cache->objects)) { - page = (void *)__get_free_page(GFP_KERNEL); + page = (void *)__get_free_page(GFP_KERNEL_ACCOUNT); if (!page) return -ENOMEM; cache->objects[cache->nobjs++] = page; -- cgit v1.2.3 From 101f0cd4f2216d32f1b8a75a2154cf3997484ee2 Mon Sep 17 00:00:00 2001 From: Gal Pressman Date: Thu, 26 Jul 2018 23:40:33 +0300 Subject: net: ena: Fix use of uninitialized DMA address bits field UBSAN triggers the following undefined behaviour warnings: [...] [ 13.236124] UBSAN: Undefined behaviour in drivers/net/ethernet/amazon/ena/ena_eth_com.c:468:22 [ 13.240043] shift exponent 64 is too large for 64-bit type 'long long unsigned int' [...] [ 13.744769] UBSAN: Undefined behaviour in drivers/net/ethernet/amazon/ena/ena_eth_com.c:373:4 [ 13.748694] shift exponent 64 is too large for 64-bit type 'long long unsigned int' [...] When splitting the address to high and low, GENMASK_ULL is used to generate a bitmask with dma_addr_bits field from io_sq (in ena_com_prepare_tx and ena_com_add_single_rx_desc). The problem is that dma_addr_bits is not initialized with a proper value (besides being cleared in ena_com_create_io_queue). Assign dma_addr_bits the correct value that is stored in ena_dev when initializing the SQ. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Gal Pressman Signed-off-by: David S. Miller --- drivers/net/ethernet/amazon/ena/ena_com.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/amazon/ena/ena_com.c b/drivers/net/ethernet/amazon/ena/ena_com.c index 1b9d3130af4d..17f12c18d225 100644 --- a/drivers/net/ethernet/amazon/ena/ena_com.c +++ b/drivers/net/ethernet/amazon/ena/ena_com.c @@ -333,6 +333,7 @@ static int ena_com_init_io_sq(struct ena_com_dev *ena_dev, memset(&io_sq->desc_addr, 0x0, sizeof(io_sq->desc_addr)); + io_sq->dma_addr_bits = ena_dev->dma_addr_bits; io_sq->desc_entry_size = (io_sq->direction == ENA_COM_IO_QUEUE_DIRECTION_TX) ? sizeof(struct ena_eth_io_tx_desc) : -- cgit v1.2.3 From 12864ff8545f6b8144fdf1bb89b5663357f29ec4 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 26 Jul 2018 10:58:20 +0200 Subject: ACPI / LPSS: Avoid PM quirks on suspend and resume from hibernation Commit a09c59130688 (ACPI / LPSS: Avoid PM quirks on suspend and resume from S3) modified the ACPI driver for Intel SoCs (LPSS) to avoid applying PM quirks on suspend and resume from S3 to address system-wide suspend and resume problems on some systems, but it is reported that the same issue also affects hibernation, so extend the approach used by that commit to cover hibernation as well. Fixes: a09c59130688 (ACPI / LPSS: Avoid PM quirks on suspend and resume from S3) Link: https://bugs.launchpad.net/bugs/1774950 Reported-by: Kai-Heng Feng Cc: 4.15+ # 4.15+ Signed-off-by: Rafael J. Wysocki Reviewed-by: Mika Westerberg --- drivers/acpi/acpi_lpss.c | 26 +++++++++++++++++--------- 1 file changed, 17 insertions(+), 9 deletions(-) diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c index f8fecfec5df9..9706613eecf9 100644 --- a/drivers/acpi/acpi_lpss.c +++ b/drivers/acpi/acpi_lpss.c @@ -879,6 +879,7 @@ static void acpi_lpss_dismiss(struct device *dev) #define LPSS_GPIODEF0_DMA_LLP BIT(13) static DEFINE_MUTEX(lpss_iosf_mutex); +static bool lpss_iosf_d3_entered; static void lpss_iosf_enter_d3_state(void) { @@ -921,6 +922,9 @@ static void lpss_iosf_enter_d3_state(void) iosf_mbi_modify(LPSS_IOSF_UNIT_LPIOEP, MBI_CR_WRITE, LPSS_IOSF_GPIODEF0, value1, mask1); + + lpss_iosf_d3_entered = true; + exit: mutex_unlock(&lpss_iosf_mutex); } @@ -935,6 +939,11 @@ static void lpss_iosf_exit_d3_state(void) mutex_lock(&lpss_iosf_mutex); + if (!lpss_iosf_d3_entered) + goto exit; + + lpss_iosf_d3_entered = false; + iosf_mbi_modify(LPSS_IOSF_UNIT_LPIOEP, MBI_CR_WRITE, LPSS_IOSF_GPIODEF0, value1, mask1); @@ -944,13 +953,13 @@ static void lpss_iosf_exit_d3_state(void) iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO1, MBI_CFG_WRITE, LPSS_IOSF_PMCSR, value2, mask2); +exit: mutex_unlock(&lpss_iosf_mutex); } -static int acpi_lpss_suspend(struct device *dev, bool runtime) +static int acpi_lpss_suspend(struct device *dev, bool wakeup) { struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev)); - bool wakeup = runtime || device_may_wakeup(dev); int ret; if (pdata->dev_desc->flags & LPSS_SAVE_CTX) @@ -963,14 +972,14 @@ static int acpi_lpss_suspend(struct device *dev, bool runtime) * wrong status for devices being about to be powered off. See * lpss_iosf_enter_d3_state() for further information. */ - if ((runtime || !pm_suspend_via_firmware()) && + if (acpi_target_system_state() == ACPI_STATE_S0 && lpss_quirks & LPSS_QUIRK_ALWAYS_POWER_ON && iosf_mbi_available()) lpss_iosf_enter_d3_state(); return ret; } -static int acpi_lpss_resume(struct device *dev, bool runtime) +static int acpi_lpss_resume(struct device *dev) { struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev)); int ret; @@ -979,8 +988,7 @@ static int acpi_lpss_resume(struct device *dev, bool runtime) * This call is kept first to be in symmetry with * acpi_lpss_runtime_suspend() one. */ - if ((runtime || !pm_resume_via_firmware()) && - lpss_quirks & LPSS_QUIRK_ALWAYS_POWER_ON && iosf_mbi_available()) + if (lpss_quirks & LPSS_QUIRK_ALWAYS_POWER_ON && iosf_mbi_available()) lpss_iosf_exit_d3_state(); ret = acpi_dev_resume(dev); @@ -1004,12 +1012,12 @@ static int acpi_lpss_suspend_late(struct device *dev) return 0; ret = pm_generic_suspend_late(dev); - return ret ? ret : acpi_lpss_suspend(dev, false); + return ret ? ret : acpi_lpss_suspend(dev, device_may_wakeup(dev)); } static int acpi_lpss_resume_early(struct device *dev) { - int ret = acpi_lpss_resume(dev, false); + int ret = acpi_lpss_resume(dev); return ret ? ret : pm_generic_resume_early(dev); } @@ -1024,7 +1032,7 @@ static int acpi_lpss_runtime_suspend(struct device *dev) static int acpi_lpss_runtime_resume(struct device *dev) { - int ret = acpi_lpss_resume(dev, true); + int ret = acpi_lpss_resume(dev); return ret ? ret : pm_generic_runtime_resume(dev); } -- cgit v1.2.3 From 8129e2a1cb39bf0df12cc13c9dc7bb581296bd7b Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Wed, 25 Jul 2018 16:35:09 +0300 Subject: tools/virtio: add dma barrier stubs Fixes: 55e49dc43a8 ("virtio_ring: switch to dma_XX barriers for rpmsg") Signed-off-by: Michael S. Tsirkin --- tools/virtio/asm/barrier.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/virtio/asm/barrier.h b/tools/virtio/asm/barrier.h index 0ac3caf90877..d0351f83aebe 100644 --- a/tools/virtio/asm/barrier.h +++ b/tools/virtio/asm/barrier.h @@ -13,8 +13,8 @@ } while (0); /* Weak barriers should be used. If not - it's a bug */ # define mb() abort() -# define rmb() abort() -# define wmb() abort() +# define dma_rmb() abort() +# define dma_wmb() abort() #else #error Please fill in barrier macros #endif -- cgit v1.2.3 From f2467ee0698e0fb98d94ed3f11d3e0c19c4228d4 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Wed, 25 Jul 2018 16:38:31 +0300 Subject: tools/virtio: add kmalloc_array stub Fixes: 6da2ec56059 ("treewide: kmalloc() -> kmalloc_array()") Signed-off-by: Michael S. Tsirkin --- tools/virtio/linux/kernel.h | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/tools/virtio/linux/kernel.h b/tools/virtio/linux/kernel.h index fca8381bbe04..fb22bccfbc8a 100644 --- a/tools/virtio/linux/kernel.h +++ b/tools/virtio/linux/kernel.h @@ -52,6 +52,11 @@ static inline void *kmalloc(size_t s, gfp_t gfp) return __kmalloc_fake; return malloc(s); } +static inline void *kmalloc_array(unsigned n, size_t s, gfp_t gfp) +{ + return kmalloc(n * s, gfp); +} + static inline void *kzalloc(size_t s, gfp_t gfp) { void *p = kmalloc(s, gfp); -- cgit v1.2.3 From 5151842b9d8732d4cbfa8400b40bff894f501b2f Mon Sep 17 00:00:00 2001 From: Greg Edwards Date: Thu, 26 Jul 2018 14:39:37 -0400 Subject: block: reset bi_iter.bi_done after splitting bio After the bio has been updated to represent the remaining sectors, reset bi_done so bio_rewind_iter() does not rewind further than it should. This resolves a bio_integrity_process() failure on reads where the original request was split. Fixes: 63573e359d05 ("bio-integrity: Restore original iterator on verify stage") Signed-off-by: Greg Edwards Signed-off-by: Jens Axboe --- block/bio.c | 1 + 1 file changed, 1 insertion(+) diff --git a/block/bio.c b/block/bio.c index dc07a427e782..05d81912870b 100644 --- a/block/bio.c +++ b/block/bio.c @@ -1893,6 +1893,7 @@ struct bio *bio_split(struct bio *bio, int sectors, bio_integrity_trim(split); bio_advance(bio, split->bi_iter.bi_size); + bio->bi_iter.bi_done = 0; if (bio_flagged(bio, BIO_TRACE_COMPLETION)) bio_set_flag(split, BIO_TRACE_COMPLETION); -- cgit v1.2.3 From 5aa3d1a20a233d4a5f1ec3d62da3f19d9afea682 Mon Sep 17 00:00:00 2001 From: Calvin Walton Date: Fri, 27 Jul 2018 07:50:53 -0400 Subject: tools/power turbostat: Read extended processor family from CPUID This fixes the reported family on modern AMD processors (e.g. Ryzen, which is family 0x17). Previously these processors all showed up as family 0xf. See the document https://support.amd.com/TechDocs/56255_OSRR.pdf section CPUID_Fn00000001_EAX for how to calculate the family from the BaseFamily and ExtFamily values. This matches the code in arch/x86/lib/cpu.c Signed-off-by: Calvin Walton Signed-off-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 2b0135599f37..6c8effebf7c5 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -4457,7 +4457,9 @@ void process_cpuid() family = (fms >> 8) & 0xf; model = (fms >> 4) & 0xf; stepping = fms & 0xf; - if (family == 6 || family == 0xf) + if (family == 0xf) + family += (fms >> 20) & 0xff; + if (family >= 6) model += ((fms >> 16) & 0xf) << 4; if (!quiet) { -- cgit v1.2.3 From 538c48f27ac669cebd6d9abe1ce8b46d55f917ee Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 27 Jul 2018 12:55:08 -0400 Subject: tools/power turbostat: version 18.07.27 Signed-off-by: Len Brown --- tools/power/x86/turbostat/turbostat.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c index 6c8effebf7c5..980bd9d20646 100644 --- a/tools/power/x86/turbostat/turbostat.c +++ b/tools/power/x86/turbostat/turbostat.c @@ -5096,7 +5096,7 @@ int get_and_dump_counters(void) } void print_version() { - fprintf(outf, "turbostat version 18.06.20" + fprintf(outf, "turbostat version 18.07.27" " - Len Brown \n"); } -- cgit v1.2.3 From d5ea019f8a381f88545bb26993b62ec24a2796b7 Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Fri, 27 Jul 2018 13:13:39 +0200 Subject: Revert "MIPS: BCM47XX: Enable 74K Core ExternalSync for PCIe erratum" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit 2a027b47dba6 ("MIPS: BCM47XX: Enable 74K Core ExternalSync for PCIe erratum"). Enabling ExternalSync caused a regression for BCM4718A1 (used e.g. in Netgear E3000 and ASUS RT-N16): it simply hangs during PCIe initialization. It's likely that BCM4717A1 is also affected. I didn't notice that earlier as the only BCM47XX devices with PCIe I own are: 1) BCM4706 with 2 x 14e4:4331 2) BCM4706 with 14e4:4360 and 14e4:4331 it appears that BCM4706 is unaffected. While BCM5300X-ES300-RDS.pdf seems to document that erratum and its workarounds (according to quotes provided by Tokunori) it seems not even Broadcom follows them. According to the provided info Broadcom should define CONF7_ES in their SDK's mipsinc.h and implement workaround in the si_mips_init(). Checking both didn't reveal such code. It *could* mean Broadcom also had some problems with the given workaround. Signed-off-by: Rafał Miłecki Signed-off-by: Paul Burton Reported-by: Michael Marley Patchwork: https://patchwork.linux-mips.org/patch/20032/ URL: https://bugs.openwrt.org/index.php?do=details&task_id=1688 Cc: Tokunori Ikegami Cc: Hauke Mehrtens Cc: Chris Packham Cc: James Hogan Cc: Ralf Baechle Cc: linux-mips@linux-mips.org --- arch/mips/bcm47xx/setup.c | 6 ------ arch/mips/include/asm/mipsregs.h | 3 --- 2 files changed, 9 deletions(-) diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c index 8c9cbf13d32a..6054d49e608e 100644 --- a/arch/mips/bcm47xx/setup.c +++ b/arch/mips/bcm47xx/setup.c @@ -212,12 +212,6 @@ static int __init bcm47xx_cpu_fixes(void) */ if (bcm47xx_bus.bcma.bus.chipinfo.id == BCMA_CHIP_ID_BCM4706) cpu_wait = NULL; - - /* - * BCM47XX Erratum "R10: PCIe Transactions Periodically Fail" - * Enable ExternalSync for sync instruction to take effect - */ - set_c0_config7(MIPS_CONF7_ES); break; #endif } diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h index 0bc270806ec5..ae461d91cd1f 100644 --- a/arch/mips/include/asm/mipsregs.h +++ b/arch/mips/include/asm/mipsregs.h @@ -681,8 +681,6 @@ #define MIPS_CONF7_WII (_ULCAST_(1) << 31) #define MIPS_CONF7_RPS (_ULCAST_(1) << 2) -/* ExternalSync */ -#define MIPS_CONF7_ES (_ULCAST_(1) << 8) #define MIPS_CONF7_IAR (_ULCAST_(1) << 10) #define MIPS_CONF7_AR (_ULCAST_(1) << 16) @@ -2767,7 +2765,6 @@ __BUILD_SET_C0(status) __BUILD_SET_C0(cause) __BUILD_SET_C0(config) __BUILD_SET_C0(config5) -__BUILD_SET_C0(config7) __BUILD_SET_C0(intcontrol) __BUILD_SET_C0(intctl) __BUILD_SET_C0(srsmap) -- cgit v1.2.3 From 4c612add7b18844ddd733ebdcbe754520155999b Mon Sep 17 00:00:00 2001 From: Eugeniy Paltsev Date: Tue, 24 Jul 2018 17:13:02 +0300 Subject: ARC: dma [non IOC]: fix arc_dma_sync_single_for_(device|cpu) ARC backend for dma_sync_single_for_(device|cpu) was broken as it was not honoring the @dir argument and simply forcing it based on the call: - arc_dma_sync_single_for_device(dir) assumed DMA_TO_DEVICE (cache wback) - arc_dma_sync_single_for_cpu(dir) assumed DMA_FROM_DEVICE (cache inv) This is not true given the DMA API programming model and has been discussed here [1] in some detail. Interestingly while the deficiency has been there forever, it only started showing up after 4.17 dma common ops rework, commit a8eb92d02dd7 ("arc: fix arc_dma_{map,unmap}_page") which wired up these calls under the more commonly used dma_map_page API triggering the issue. [1]: https://lkml.org/lkml/2018/5/18/979 Fixes: commit a8eb92d02dd7 ("arc: fix arc_dma_{map,unmap}_page") Cc: stable@kernel.org # v4.17+ Signed-off-by: Eugeniy Paltsev Signed-off-by: Vineet Gupta [vgupta: reworked changelog] --- arch/arc/mm/dma.c | 49 +++++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 47 insertions(+), 2 deletions(-) diff --git a/arch/arc/mm/dma.c b/arch/arc/mm/dma.c index 8c1071840979..ec47e6079f5d 100644 --- a/arch/arc/mm/dma.c +++ b/arch/arc/mm/dma.c @@ -129,14 +129,59 @@ int arch_dma_mmap(struct device *dev, struct vm_area_struct *vma, return ret; } +/* + * Cache operations depending on function and direction argument, inspired by + * https://lkml.org/lkml/2018/5/18/979 + * "dma_sync_*_for_cpu and direction=TO_DEVICE (was Re: [PATCH 02/20] + * dma-mapping: provide a generic dma-noncoherent implementation)" + * + * | map == for_device | unmap == for_cpu + * |---------------------------------------------------------------- + * TO_DEV | writeback writeback | none none + * FROM_DEV | invalidate invalidate | invalidate* invalidate* + * BIDIR | writeback+inv writeback+inv | invalidate invalidate + * + * [*] needed for CPU speculative prefetches + * + * NOTE: we don't check the validity of direction argument as it is done in + * upper layer functions (in include/linux/dma-mapping.h) + */ + void arch_sync_dma_for_device(struct device *dev, phys_addr_t paddr, size_t size, enum dma_data_direction dir) { - dma_cache_wback(paddr, size); + switch (dir) { + case DMA_TO_DEVICE: + dma_cache_wback(paddr, size); + break; + + case DMA_FROM_DEVICE: + dma_cache_inv(paddr, size); + break; + + case DMA_BIDIRECTIONAL: + dma_cache_wback_inv(paddr, size); + break; + + default: + break; + } } void arch_sync_dma_for_cpu(struct device *dev, phys_addr_t paddr, size_t size, enum dma_data_direction dir) { - dma_cache_inv(paddr, size); + switch (dir) { + case DMA_TO_DEVICE: + break; + + /* FROM_DEVICE invalidate needed if speculative CPU prefetch only */ + case DMA_FROM_DEVICE: + case DMA_BIDIRECTIONAL: + dma_cache_inv(paddr, size); + break; + + default: + break; + } } -- cgit v1.2.3 From eb2777397fd83a4a7eaa26984d09d3babb845d2a Mon Sep 17 00:00:00 2001 From: Eugeniy Paltsev Date: Thu, 26 Jul 2018 16:15:43 +0300 Subject: ARC: dma [non-IOC] setup SMP_CACHE_BYTES and cache_line_size As for today we don't setup SMP_CACHE_BYTES and cache_line_size for ARC, so they are set to L1_CACHE_BYTES by default. L1 line length (L1_CACHE_BYTES) might be easily smaller than L2 line (which is usually the case BTW). This breaks code. For example this breaks ethernet infrastructure on HSDK/AXS103 boards with IOC disabled, involving manual cache flushes Functions which alloc and manage sk_buff packet data area rely on SMP_CACHE_BYTES define. In the result we can share last L2 cache line in sk_buff linear packet data area between DMA buffer and some useful data in other structure. So we can lose this data when we invalidate DMA buffer. sk_buff linear packet data area | | | skb->end skb->tail V | | V V ----------------------------------------------. packet data | | ----------------------------------------------. ---------------------.--------------------------------------------------. SLC line | SLC (L2 cache) line (128B) | ---------------------.--------------------------------------------------. ^ ^ | | These cache lines will be invalidated when we invalidate skb linear packet data area before DMA transaction starting. This leads to issues painful to debug as it reproduces only if (sk_buff->end - sk_buff->tail) < SLC_LINE_SIZE and if we have some useful data right after sk_buff->end. Fix that by hardcode SMP_CACHE_BYTES to max line length we may have. Signed-off-by: Eugeniy Paltsev Signed-off-by: Vineet Gupta --- arch/arc/Kconfig | 3 +++ arch/arc/include/asm/cache.h | 4 +++- 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index 9cf59fc60eab..5151d81476a1 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -50,6 +50,9 @@ config ARC select HAVE_KERNEL_LZMA select ARCH_HAS_PTE_SPECIAL +config ARCH_HAS_CACHE_LINE_SIZE + def_bool y + config MIGHT_HAVE_PCI bool diff --git a/arch/arc/include/asm/cache.h b/arch/arc/include/asm/cache.h index 8486f328cc5d..ff7d3232764a 100644 --- a/arch/arc/include/asm/cache.h +++ b/arch/arc/include/asm/cache.h @@ -48,7 +48,9 @@ }) /* Largest line length for either L1 or L2 is 128 bytes */ -#define ARCH_DMA_MINALIGN 128 +#define SMP_CACHE_BYTES 128 +#define cache_line_size() SMP_CACHE_BYTES +#define ARCH_DMA_MINALIGN SMP_CACHE_BYTES extern void arc_cache_init(void); extern char *arc_cache_mumbojumbo(int cpu_id, char *buf, int len); -- cgit v1.2.3 From a54e43f993f8ec2f063b616a0e4d2b09e08d78a5 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 27 Jul 2018 17:10:39 -0500 Subject: PCI: mobiveil: Avoid integer overflow in IB_WIN_SIZE IB_WIN_SIZE is larger than INT_MAX so we need to cast it to u64. Fixes: 9af6bcb11e12 ("PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver") Signed-off-by: Dan Carpenter Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas --- drivers/pci/controller/pcie-mobiveil.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/controller/pcie-mobiveil.c b/drivers/pci/controller/pcie-mobiveil.c index 4d6c20e47bed..cf0aa7cee5b0 100644 --- a/drivers/pci/controller/pcie-mobiveil.c +++ b/drivers/pci/controller/pcie-mobiveil.c @@ -107,7 +107,7 @@ #define CFG_WINDOW_TYPE 0 #define IO_WINDOW_TYPE 1 #define MEM_WINDOW_TYPE 2 -#define IB_WIN_SIZE (256 * 1024 * 1024 * 1024) +#define IB_WIN_SIZE ((u64)256 * 1024 * 1024 * 1024) #define MAX_PIO_WINDOWS 8 /* Parameters for the waiting for link up routine */ -- cgit v1.2.3 From b611da43b68193dcb7e632adb44d506374a5d3ef Mon Sep 17 00:00:00 2001 From: Thomas Richter Date: Fri, 27 Jul 2018 10:21:26 +0200 Subject: perf build: Build error in libbpf missing initialization MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In linux-next tree compiling the perf tool with additional make flags EXTRA_CFLAGS="-Wp,-D_FORTIFY_SOURCE=2 -O2" causes a compiler error. It is the warning 'variable may be used uninitialized' which is treated as error: I compile it using a FEDORA 28 installation, my gcc compiler version: gcc (GCC) 8.0.1 20180324 (Red Hat 8.0.1-0.20). The file that causes the error is tools/lib/bpf/libbpf.c. [root@p23lp27] # make V=1 EXTRA_CFLAGS="-Wp,-D_FORTIFY_SOURCE=2 -O2" [...] Makefile.config:849: No openjdk development package found, please install JDK package, e.g. openjdk-8-jdk, java-1.8.0-openjdk-devel Warning: Kernel ABI header at 'tools/include/uapi/linux/if_link.h' differs from latest version at 'include/uapi/linux/if_link.h' CC libbpf.o libbpf.c: In function ‘bpf_perf_event_read_simple’: libbpf.c:2342:6: error: ‘ret’ may be used uninitialized in this function [-Werror=maybe-uninitialized] int ret; ^ cc1: all warnings being treated as errors mv: cannot stat './.libbpf.o.tmp': No such file or directory /home6/tmricht/linux-next/tools/build/Makefile.build:96: recipe for target 'libbpf.o' failed Suggested-by: Jakub Kicinski Signed-off-by: Thomas Richter Signed-off-by: Daniel Borkmann --- tools/lib/bpf/libbpf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c index d881d370616c..1aafdbe827fe 100644 --- a/tools/lib/bpf/libbpf.c +++ b/tools/lib/bpf/libbpf.c @@ -2273,8 +2273,8 @@ bpf_perf_event_read_simple(void *mem, unsigned long size, volatile struct perf_event_mmap_page *header = mem; __u64 data_tail = header->data_tail; __u64 data_head = header->data_head; + int ret = LIBBPF_PERF_EVENT_ERROR; void *base, *begin, *end; - int ret; asm volatile("" ::: "memory"); /* in real code it should be smp_rmb() */ if (data_head == data_tail) -- cgit v1.2.3 From 3eee1f75f2b9c107d4a097e8b640553376a5b171 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Sat, 28 Jul 2018 00:17:56 +0200 Subject: bpf: fix bpf_skb_load_bytes_relative pkt length check The len > skb_headlen(skb) cannot be used as a maximum upper bound for the packet length since it does not have any relation to the full linear packet length when filtering is used from upper layers (e.g. in case of reuseport BPF programs) as by then skb->data, skb->len already got mangled through __skb_pull() and others. Fixes: 4e1ec56cdc59 ("bpf: add skb_load_bytes_relative helper") Signed-off-by: Daniel Borkmann Acked-by: Martin KaFai Lau --- net/core/filter.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/net/core/filter.c b/net/core/filter.c index 06da770f543f..9dfd145eedcc 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -1712,24 +1712,26 @@ static const struct bpf_func_proto bpf_skb_load_bytes_proto = { BPF_CALL_5(bpf_skb_load_bytes_relative, const struct sk_buff *, skb, u32, offset, void *, to, u32, len, u32, start_header) { + u8 *end = skb_tail_pointer(skb); + u8 *net = skb_network_header(skb); + u8 *mac = skb_mac_header(skb); u8 *ptr; - if (unlikely(offset > 0xffff || len > skb_headlen(skb))) + if (unlikely(offset > 0xffff || len > (end - mac))) goto err_clear; switch (start_header) { case BPF_HDR_START_MAC: - ptr = skb_mac_header(skb) + offset; + ptr = mac + offset; break; case BPF_HDR_START_NET: - ptr = skb_network_header(skb) + offset; + ptr = net + offset; break; default: goto err_clear; } - if (likely(ptr >= skb_mac_header(skb) && - ptr + len <= skb_tail_pointer(skb))) { + if (likely(ptr >= mac && ptr + len <= end)) { memcpy(to, ptr, len); return 0; } -- cgit v1.2.3 From 71eb5255f55bdb484d35ff7c9a1803f453dfbf82 Mon Sep 17 00:00:00 2001 From: Taehee Yoo Date: Sun, 29 Jul 2018 00:28:31 +0900 Subject: bpf: use GFP_ATOMIC instead of GFP_KERNEL in bpf_parse_prog() bpf_parse_prog() is protected by rcu_read_lock(). so that GFP_KERNEL is not allowed in the bpf_parse_prog(). [51015.579396] ============================= [51015.579418] WARNING: suspicious RCU usage [51015.579444] 4.18.0-rc6+ #208 Not tainted [51015.579464] ----------------------------- [51015.579488] ./include/linux/rcupdate.h:303 Illegal context switch in RCU read-side critical section! [51015.579510] other info that might help us debug this: [51015.579532] rcu_scheduler_active = 2, debug_locks = 1 [51015.579556] 2 locks held by ip/1861: [51015.579577] #0: 00000000a8c12fd1 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x2e0/0x910 [51015.579711] #1: 00000000bf815f8e (rcu_read_lock){....}, at: lwtunnel_build_state+0x96/0x390 [51015.579842] stack backtrace: [51015.579869] CPU: 0 PID: 1861 Comm: ip Not tainted 4.18.0-rc6+ #208 [51015.579891] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 07/08/2015 [51015.579911] Call Trace: [51015.579950] dump_stack+0x74/0xbb [51015.580000] ___might_sleep+0x16b/0x3a0 [51015.580047] __kmalloc_track_caller+0x220/0x380 [51015.580077] kmemdup+0x1c/0x40 [51015.580077] bpf_parse_prog+0x10e/0x230 [51015.580164] ? kasan_kmalloc+0xa0/0xd0 [51015.580164] ? bpf_destroy_state+0x30/0x30 [51015.580164] ? bpf_build_state+0xe2/0x3e0 [51015.580164] bpf_build_state+0x1bb/0x3e0 [51015.580164] ? bpf_parse_prog+0x230/0x230 [51015.580164] ? lock_is_held_type+0x123/0x1a0 [51015.580164] lwtunnel_build_state+0x1aa/0x390 [51015.580164] fib_create_info+0x1579/0x33d0 [51015.580164] ? sched_clock_local+0xe2/0x150 [51015.580164] ? fib_info_update_nh_saddr+0x1f0/0x1f0 [51015.580164] ? sched_clock_local+0xe2/0x150 [51015.580164] fib_table_insert+0x201/0x1990 [51015.580164] ? lock_downgrade+0x610/0x610 [51015.580164] ? fib_table_lookup+0x1920/0x1920 [51015.580164] ? lwtunnel_valid_encap_type.part.6+0xcb/0x3a0 [51015.580164] ? rtm_to_fib_config+0x637/0xbd0 [51015.580164] inet_rtm_newroute+0xed/0x1b0 [51015.580164] ? rtm_to_fib_config+0xbd0/0xbd0 [51015.580164] rtnetlink_rcv_msg+0x331/0x910 [ ... ] Fixes: 3a0af8fd61f9 ("bpf: BPF for lightweight tunnel infrastructure") Signed-off-by: Taehee Yoo Signed-off-by: Daniel Borkmann --- net/core/lwt_bpf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/core/lwt_bpf.c b/net/core/lwt_bpf.c index e7e626fb87bb..e45098593dc0 100644 --- a/net/core/lwt_bpf.c +++ b/net/core/lwt_bpf.c @@ -217,7 +217,7 @@ static int bpf_parse_prog(struct nlattr *attr, struct bpf_lwt_prog *prog, if (!tb[LWT_BPF_PROG_FD] || !tb[LWT_BPF_PROG_NAME]) return -EINVAL; - prog->name = nla_memdup(tb[LWT_BPF_PROG_NAME], GFP_KERNEL); + prog->name = nla_memdup(tb[LWT_BPF_PROG_NAME], GFP_ATOMIC); if (!prog->name) return -ENOMEM; -- cgit v1.2.3 From ee614c871014045b45fae149b7245fc22a0bbdd8 Mon Sep 17 00:00:00 2001 From: John Hurley Date: Fri, 27 Jul 2018 20:56:52 -0700 Subject: nfp: flower: fix port metadata conversion bug Function nfp_flower_repr_get_type_and_port expects an enum nfp_repr_type return value but, if the repr type is unknown, returns a value of type enum nfp_flower_cmsg_port_type. This means that if FW encodes the port ID in a way the driver does not understand instead of dropping the frame driver may attribute it to a physical port (uplink) provided the port number is less than physical port count. Fix this and ensure a net_device of NULL is returned if the repr can not be determined. Fixes: 1025351a88a4 ("nfp: add flower app") Signed-off-by: John Hurley Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller --- drivers/net/ethernet/netronome/nfp/flower/main.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/netronome/nfp/flower/main.c b/drivers/net/ethernet/netronome/nfp/flower/main.c index 1decf3a1cad3..e57d23746585 100644 --- a/drivers/net/ethernet/netronome/nfp/flower/main.c +++ b/drivers/net/ethernet/netronome/nfp/flower/main.c @@ -80,7 +80,7 @@ nfp_flower_repr_get_type_and_port(struct nfp_app *app, u32 port_id, u8 *port) return NFP_REPR_TYPE_VF; } - return NFP_FLOWER_CMSG_PORT_TYPE_UNSPEC; + return __NFP_REPR_TYPE_MAX; } static struct net_device * @@ -91,6 +91,8 @@ nfp_flower_repr_get(struct nfp_app *app, u32 port_id) u8 port = 0; repr_type = nfp_flower_repr_get_type_and_port(app, port_id, &port); + if (repr_type > NFP_REPR_TYPE_MAX) + return NULL; reprs = rcu_dereference(app->reprs[repr_type]); if (!reprs) -- cgit v1.2.3 From 136f55f660192ce04af091642efc75d85e017364 Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Sat, 28 Jul 2018 09:52:10 +0200 Subject: net: lan78xx: fix rx handling before first packet is send As long the bh tasklet isn't scheduled once, no packet from the rx path will be handled. Since the tx path also schedule the same tasklet this situation only persits until the first packet transmission. So fix this issue by scheduling the tasklet after link reset. Link: https://github.com/raspberrypi/linux/issues/2617 Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet") Suggested-by: Floris Bos Signed-off-by: Stefan Wahren Signed-off-by: David S. Miller --- drivers/net/usb/lan78xx.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c index ed10d49eb5e0..aeca484a75b8 100644 --- a/drivers/net/usb/lan78xx.c +++ b/drivers/net/usb/lan78xx.c @@ -1242,6 +1242,8 @@ static int lan78xx_link_reset(struct lan78xx_net *dev) mod_timer(&dev->stat_monitor, jiffies + STAT_UPDATE_TIMER); } + + tasklet_schedule(&dev->bh); } return ret; -- cgit v1.2.3 From ab123fe071c9aa9680ecd62eb080eb26cff4892c Mon Sep 17 00:00:00 2001 From: Govindarajulu Varadarajan Date: Fri, 27 Jul 2018 11:19:29 -0700 Subject: enic: handle mtu change for vf properly When driver gets notification for mtu change, driver does not handle it for all RQs. It handles only RQ[0]. Fix is to use enic_change_mtu() interface to change mtu for vf. Signed-off-by: Govindarajulu Varadarajan Signed-off-by: David S. Miller --- drivers/net/ethernet/cisco/enic/enic_main.c | 78 ++++++++++------------------- 1 file changed, 27 insertions(+), 51 deletions(-) diff --git a/drivers/net/ethernet/cisco/enic/enic_main.c b/drivers/net/ethernet/cisco/enic/enic_main.c index 90c645b8538e..6b0376123cde 100644 --- a/drivers/net/ethernet/cisco/enic/enic_main.c +++ b/drivers/net/ethernet/cisco/enic/enic_main.c @@ -2047,28 +2047,42 @@ static int enic_stop(struct net_device *netdev) return 0; } +static int _enic_change_mtu(struct net_device *netdev, int new_mtu) +{ + bool running = netif_running(netdev); + int err = 0; + + ASSERT_RTNL(); + if (running) { + err = enic_stop(netdev); + if (err) + return err; + } + + netdev->mtu = new_mtu; + + if (running) { + err = enic_open(netdev); + if (err) + return err; + } + + return 0; +} + static int enic_change_mtu(struct net_device *netdev, int new_mtu) { struct enic *enic = netdev_priv(netdev); - int running = netif_running(netdev); if (enic_is_dynamic(enic) || enic_is_sriov_vf(enic)) return -EOPNOTSUPP; - if (running) - enic_stop(netdev); - - netdev->mtu = new_mtu; - if (netdev->mtu > enic->port_mtu) netdev_warn(netdev, - "interface MTU (%d) set higher than port MTU (%d)\n", - netdev->mtu, enic->port_mtu); + "interface MTU (%d) set higher than port MTU (%d)\n", + netdev->mtu, enic->port_mtu); - if (running) - enic_open(netdev); - - return 0; + return _enic_change_mtu(netdev, new_mtu); } static void enic_change_mtu_work(struct work_struct *work) @@ -2076,47 +2090,9 @@ static void enic_change_mtu_work(struct work_struct *work) struct enic *enic = container_of(work, struct enic, change_mtu_work); struct net_device *netdev = enic->netdev; int new_mtu = vnic_dev_mtu(enic->vdev); - int err; - unsigned int i; - - new_mtu = max_t(int, ENIC_MIN_MTU, min_t(int, ENIC_MAX_MTU, new_mtu)); rtnl_lock(); - - /* Stop RQ */ - del_timer_sync(&enic->notify_timer); - - for (i = 0; i < enic->rq_count; i++) - napi_disable(&enic->napi[i]); - - vnic_intr_mask(&enic->intr[0]); - enic_synchronize_irqs(enic); - err = vnic_rq_disable(&enic->rq[0]); - if (err) { - rtnl_unlock(); - netdev_err(netdev, "Unable to disable RQ.\n"); - return; - } - vnic_rq_clean(&enic->rq[0], enic_free_rq_buf); - vnic_cq_clean(&enic->cq[0]); - vnic_intr_clean(&enic->intr[0]); - - /* Fill RQ with new_mtu-sized buffers */ - netdev->mtu = new_mtu; - vnic_rq_fill(&enic->rq[0], enic_rq_alloc_buf); - /* Need at least one buffer on ring to get going */ - if (vnic_rq_desc_used(&enic->rq[0]) == 0) { - rtnl_unlock(); - netdev_err(netdev, "Unable to alloc receive buffers.\n"); - return; - } - - /* Start RQ */ - vnic_rq_enable(&enic->rq[0]); - napi_enable(&enic->napi[0]); - vnic_intr_unmask(&enic->intr[0]); - enic_notify_timer_start(enic); - + (void)_enic_change_mtu(netdev, new_mtu); rtnl_unlock(); netdev_info(netdev, "interface MTU set as %d\n", netdev->mtu); -- cgit v1.2.3 From 9fc12023d6f51551d6ca9ed7e02ecc19d79caf17 Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Fri, 27 Jul 2018 18:15:46 +0200 Subject: ipv4: remove BUG_ON() from fib_compute_spec_dst Remove BUG_ON() from fib_compute_spec_dst routine and check in_dev pointer during flowi4 data structure initialization. fib_compute_spec_dst routine can be run concurrently with device removal where ip_ptr net_device pointer is set to NULL. This can happen if userspace enables pkt info on UDP rx socket and the device is removed while traffic is flowing Fixes: 35ebf65e851c ("ipv4: Create and use fib_compute_spec_dst() helper") Signed-off-by: Lorenzo Bianconi Signed-off-by: David S. Miller --- net/ipv4/fib_frontend.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c index e46cdd310e5f..2998b0e47d4b 100644 --- a/net/ipv4/fib_frontend.c +++ b/net/ipv4/fib_frontend.c @@ -292,19 +292,19 @@ __be32 fib_compute_spec_dst(struct sk_buff *skb) return ip_hdr(skb)->daddr; in_dev = __in_dev_get_rcu(dev); - BUG_ON(!in_dev); net = dev_net(dev); scope = RT_SCOPE_UNIVERSE; if (!ipv4_is_zeronet(ip_hdr(skb)->saddr)) { + bool vmark = in_dev && IN_DEV_SRC_VMARK(in_dev); struct flowi4 fl4 = { .flowi4_iif = LOOPBACK_IFINDEX, .flowi4_oif = l3mdev_master_ifindex_rcu(dev), .daddr = ip_hdr(skb)->saddr, .flowi4_tos = RT_TOS(ip_hdr(skb)->tos), .flowi4_scope = scope, - .flowi4_mark = IN_DEV_SRC_VMARK(in_dev) ? skb->mark : 0, + .flowi4_mark = vmark ? skb->mark : 0, }; if (!fib_lookup(net, &fl4, &res, 0)) return FIB_RES_PREFSRC(net, res); -- cgit v1.2.3 From b0753408aadf32c7ece9e6b765017881e54af833 Mon Sep 17 00:00:00 2001 From: Anton Vasilyev Date: Fri, 27 Jul 2018 18:57:47 +0300 Subject: net: mdio-mux: bcm-iproc: fix wrong getter and setter pair mdio_mux_iproc_probe() uses platform_set_drvdata() to store md pointer in device, whereas mdio_mux_iproc_remove() restores md pointer by dev_get_platdata(&pdev->dev). This leads to wrong resources release. The patch replaces getter to platform_get_drvdata. Fixes: 98bc865a1ec8 ("net: mdio-mux: Add MDIO mux driver for iProc SoCs") Signed-off-by: Anton Vasilyev Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/phy/mdio-mux-bcm-iproc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/phy/mdio-mux-bcm-iproc.c b/drivers/net/phy/mdio-mux-bcm-iproc.c index 0831b7142df7..0c5b68e7da51 100644 --- a/drivers/net/phy/mdio-mux-bcm-iproc.c +++ b/drivers/net/phy/mdio-mux-bcm-iproc.c @@ -218,7 +218,7 @@ out: static int mdio_mux_iproc_remove(struct platform_device *pdev) { - struct iproc_mdiomux_desc *md = dev_get_platdata(&pdev->dev); + struct iproc_mdiomux_desc *md = platform_get_drvdata(pdev); mdio_mux_uninit(md->mux_handle); mdiobus_unregister(md->mii_bus); -- cgit v1.2.3 From c8e8cd579bb4265651df8223730105341e61a2d1 Mon Sep 17 00:00:00 2001 From: Jeremy Cline Date: Fri, 27 Jul 2018 22:43:01 +0000 Subject: net: socket: fix potential spectre v1 gadget in socketcall 'call' is a user-controlled value, so sanitize the array index after the bounds check to avoid speculating past the bounds of the 'nargs' array. Found with the help of Smatch: net/socket.c:2508 __do_sys_socketcall() warn: potential spectre issue 'nargs' [r] (local cap) Cc: Josh Poimboeuf Cc: stable@vger.kernel.org Signed-off-by: Jeremy Cline Signed-off-by: David S. Miller --- net/socket.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/socket.c b/net/socket.c index 85633622c94d..4ac3b834cce9 100644 --- a/net/socket.c +++ b/net/socket.c @@ -89,6 +89,7 @@ #include #include #include +#include #include #include @@ -2522,6 +2523,7 @@ SYSCALL_DEFINE2(socketcall, int, call, unsigned long __user *, args) if (call < 1 || call > SYS_SENDMMSG) return -EINVAL; + call = array_index_nospec(call, SYS_SENDMMSG + 1); len = nargs[call]; if (len > sizeof(a)) -- cgit v1.2.3 From e978de7a6d382ec378830ca2cf38e902df0b6d84 Mon Sep 17 00:00:00 2001 From: Jeremy Cline Date: Fri, 27 Jul 2018 22:43:02 +0000 Subject: net: socket: Fix potential spectre v1 gadget in sock_is_registered 'family' can be a user-controlled value, so sanitize it after the bounds check to avoid speculative out-of-bounds access. Cc: Josh Poimboeuf Cc: stable@vger.kernel.org Signed-off-by: Jeremy Cline Signed-off-by: David S. Miller --- net/socket.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/socket.c b/net/socket.c index 4ac3b834cce9..8c24d5dc4bc8 100644 --- a/net/socket.c +++ b/net/socket.c @@ -2690,7 +2690,8 @@ EXPORT_SYMBOL(sock_unregister); bool sock_is_registered(int family) { - return family < NPROTO && rcu_access_pointer(net_families[family]); + return family < NPROTO && + rcu_access_pointer(net_families[array_index_nospec(family, NPROTO)]); } static int __init sock_init(void) -- cgit v1.2.3 From 383d470936c05554219094a4d364d964cb324827 Mon Sep 17 00:00:00 2001 From: Neal Cardwell Date: Fri, 27 Jul 2018 17:19:12 -0400 Subject: tcp_bbr: fix bw probing to raise in-flight data for very small BDPs For some very small BDPs (with just a few packets) there was a quantization effect where the target number of packets in flight during the super-unity-gain (1.25x) phase of gain cycling was implicitly truncated to a number of packets no larger than the normal unity-gain (1.0x) phase of gain cycling. This meant that in multi-flow scenarios some flows could get stuck with a lower bandwidth, because they did not push enough packets inflight to discover that there was more bandwidth available. This was really only an issue in multi-flow LAN scenarios, where RTTs and BDPs are low enough for this to be an issue. This fix ensures that gain cycling can raise inflight for small BDPs by ensuring that in PROBE_BW mode target inflight values with a super-unity gain are always greater than inflight values with a gain <= 1. Importantly, this applies whether the inflight value is calculated for use as a cwnd value, or as a target inflight value for the end of the super-unity phase in bbr_is_next_cycle_phase() (both need to be bigger to ensure we can probe with more packets in flight reliably). This is a candidate fix for stable releases. Fixes: 0f8782ea1497 ("tcp_bbr: add BBR congestion control") Signed-off-by: Neal Cardwell Acked-by: Yuchung Cheng Acked-by: Soheil Hassas Yeganeh Acked-by: Priyaranjan Jha Reviewed-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/tcp_bbr.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/ipv4/tcp_bbr.c b/net/ipv4/tcp_bbr.c index 58e2f479ffb4..4bfff3c87e8e 100644 --- a/net/ipv4/tcp_bbr.c +++ b/net/ipv4/tcp_bbr.c @@ -354,6 +354,10 @@ static u32 bbr_target_cwnd(struct sock *sk, u32 bw, int gain) /* Reduce delayed ACKs by rounding up cwnd to the next even number. */ cwnd = (cwnd + 1) & ~1U; + /* Ensure gain cycling gets inflight above BDP even for small BDPs. */ + if (bbr->mode == BBR_PROBE_BW && gain > BBR_UNIT) + cwnd += 2; + return cwnd; } -- cgit v1.2.3 From 460a53106ac39b74625d1104d9a113e0f3716c18 Mon Sep 17 00:00:00 2001 From: Erik Schmauss Date: Sat, 28 Jul 2018 14:05:19 -0700 Subject: ACPICA: AML Parser: ignore control method status in module-level code Previous change in the AML parser code blindly set all non-successful dispatcher statuses to AE_OK. That approach is incorrect, though, because successful control method invocations from module-level return AE_CTRL_TRANSFER. Overwriting AE_OK to this status causes the AML parser to think that there was no return value from the control method invocation. Fixes: 92c0f4af386 (ACPICA: AML Parser: ignore dispatcher error status during table load) Reported-by: Linus Torvalds Tested-by: Linus Torvalds Tested-by: Oleksandr Natalenko Signed-off-by: Erik Schmauss Signed-off-by: Rafael J. Wysocki --- drivers/acpi/acpica/psloop.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) diff --git a/drivers/acpi/acpica/psloop.c b/drivers/acpi/acpica/psloop.c index ee840be150b5..44f35ab3347d 100644 --- a/drivers/acpi/acpica/psloop.c +++ b/drivers/acpi/acpica/psloop.c @@ -709,15 +709,20 @@ acpi_status acpi_ps_parse_loop(struct acpi_walk_state *walk_state) } else if ((walk_state-> parse_flags & ACPI_PARSE_MODULE_LEVEL) + && status != AE_CTRL_TRANSFER && ACPI_FAILURE(status)) { /* - * ACPI_PARSE_MODULE_LEVEL means that we are loading a table by - * executing it as a control method. However, if we encounter - * an error while loading the table, we need to keep trying to - * load the table rather than aborting the table load. Set the - * status to AE_OK to proceed with the table load. If we get a - * failure at this point, it means that the dispatcher got an - * error while processing Op (most likely an AML operand error. + * ACPI_PARSE_MODULE_LEVEL flag means that we are currently + * loading a table by executing it as a control method. + * However, if we encounter an error while loading the table, + * we need to keep trying to load the table rather than + * aborting the table load (setting the status to AE_OK + * continues the table load). If we get a failure at this + * point, it means that the dispatcher got an error while + * processing Op (most likely an AML operand error) or a + * control method was called from module level and the + * dispatcher returned AE_CTRL_TRANSFER. In the latter case, + * leave the status alone, there's nothing wrong with it. */ status = AE_OK; } -- cgit v1.2.3 From 9939a46d90c6c76f4533d534dbadfa7b39dc6acc Mon Sep 17 00:00:00 2001 From: Eugeniy Paltsev Date: Thu, 26 Jul 2018 15:05:37 +0300 Subject: NET: stmmac: align DMA stuff to largest cache line length As for today STMMAC_ALIGN macro (which is used to align DMA stuff) relies on L1 line length (L1_CACHE_BYTES). This isn't correct in case of system with several cache levels which might have L1 cache line length smaller than L2 line. This can lead to sharing one cache line between DMA buffer and other data, so we can lose this data while invalidate DMA buffer before DMA transaction. Fix that by using SMP_CACHE_BYTES instead of L1_CACHE_BYTES for aligning. Signed-off-by: Eugeniy Paltsev Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 60f59abab009..ef6a8d39db2f 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -53,7 +53,7 @@ #include "dwmac1000.h" #include "hwif.h" -#define STMMAC_ALIGN(x) L1_CACHE_ALIGN(x) +#define STMMAC_ALIGN(x) __ALIGN_KERNEL(x, SMP_CACHE_BYTES) #define TSO_MAX_BUFF_SIZE (SZ_16K - 1) /* Module parameters */ -- cgit v1.2.3 From 5012284700775a4e6e3fbe7eac4c543c4874b559 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sat, 28 Jul 2018 08:12:04 -0400 Subject: ext4: fix check to prevent initializing reserved inodes Commit 8844618d8aa7: "ext4: only look at the bg_flags field if it is valid" will complain if block group zero does not have the EXT4_BG_INODE_ZEROED flag set. Unfortunately, this is not correct, since a freshly created file system has this flag cleared. It gets almost immediately after the file system is mounted read-write --- but the following somewhat unlikely sequence will end up triggering a false positive report of a corrupted file system: mkfs.ext4 /dev/vdc mount -o ro /dev/vdc /vdc mount -o remount,rw /dev/vdc Instead, when initializing the inode table for block group zero, test to make sure that itable_unused count is not too large, since that is the case that will result in some or all of the reserved inodes getting cleared. This fixes the failures reported by Eric Whiteney when running generic/230 and generic/231 in the the nojournal test case. Fixes: 8844618d8aa7 ("ext4: only look at the bg_flags field if it is valid") Reported-by: Eric Whitney Signed-off-by: Theodore Ts'o --- fs/ext4/ialloc.c | 5 ++++- fs/ext4/super.c | 8 +------- 2 files changed, 5 insertions(+), 8 deletions(-) diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c index e9d8e2667ab5..f336cbc6e932 100644 --- a/fs/ext4/ialloc.c +++ b/fs/ext4/ialloc.c @@ -1388,7 +1388,10 @@ int ext4_init_inode_table(struct super_block *sb, ext4_group_t group, ext4_itable_unused_count(sb, gdp)), sbi->s_inodes_per_block); - if ((used_blks < 0) || (used_blks > sbi->s_itb_per_group)) { + if ((used_blks < 0) || (used_blks > sbi->s_itb_per_group) || + ((group == 0) && ((EXT4_INODES_PER_GROUP(sb) - + ext4_itable_unused_count(sb, gdp)) < + EXT4_FIRST_INO(sb)))) { ext4_error(sb, "Something is wrong with group %u: " "used itable blocks: %d; " "itable unused count: %u", diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 680526e9ee96..b7f7922061be 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -3141,14 +3141,8 @@ static ext4_group_t ext4_has_uninit_itable(struct super_block *sb) if (!gdp) continue; - if (gdp->bg_flags & cpu_to_le16(EXT4_BG_INODE_ZEROED)) - continue; - if (group != 0) + if (!(gdp->bg_flags & cpu_to_le16(EXT4_BG_INODE_ZEROED))) break; - ext4_error(sb, "Inode table for bg 0 marked as " - "needing zeroing"); - if (sb_rdonly(sb)) - return ngroups; } return group; -- cgit v1.2.3 From 01cfb7937a9af2abb1136c7e89fbf3fd92952956 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 29 Jul 2018 12:44:46 -0700 Subject: squashfs: be more careful about metadata corruption Anatoly Trosinenko reports that a corrupted squashfs image can cause a kernel oops. It turns out that squashfs can end up being confused about negative fragment lengths. The regular squashfs_read_data() does check for negative lengths, but squashfs_read_metadata() did not, and the fragment size code just blindly trusted the on-disk value. Fix both the fragment parsing and the metadata reading code. Reported-by: Anatoly Trosinenko Cc: Al Viro Cc: Phillip Lougher Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- fs/squashfs/cache.c | 3 +++ fs/squashfs/file.c | 8 ++++++-- fs/squashfs/fragment.c | 4 +--- fs/squashfs/squashfs_fs.h | 6 ++++++ 4 files changed, 16 insertions(+), 5 deletions(-) diff --git a/fs/squashfs/cache.c b/fs/squashfs/cache.c index 23813c078cc9..0839efa720b3 100644 --- a/fs/squashfs/cache.c +++ b/fs/squashfs/cache.c @@ -350,6 +350,9 @@ int squashfs_read_metadata(struct super_block *sb, void *buffer, TRACE("Entered squashfs_read_metadata [%llx:%x]\n", *block, *offset); + if (unlikely(length < 0)) + return -EIO; + while (length) { entry = squashfs_cache_get(sb, msblk->block_cache, *block, 0); if (entry->error) { diff --git a/fs/squashfs/file.c b/fs/squashfs/file.c index 13d80947bf9e..fcff2e0487fe 100644 --- a/fs/squashfs/file.c +++ b/fs/squashfs/file.c @@ -194,7 +194,11 @@ static long long read_indexes(struct super_block *sb, int n, } for (i = 0; i < blocks; i++) { - int size = le32_to_cpu(blist[i]); + int size = squashfs_block_size(blist[i]); + if (size < 0) { + err = size; + goto failure; + } block += SQUASHFS_COMPRESSED_SIZE_BLOCK(size); } n -= blocks; @@ -367,7 +371,7 @@ static int read_blocklist(struct inode *inode, int index, u64 *block) sizeof(size)); if (res < 0) return res; - return le32_to_cpu(size); + return squashfs_block_size(size); } /* Copy data into page cache */ diff --git a/fs/squashfs/fragment.c b/fs/squashfs/fragment.c index 0ed6edbc5c71..86ad9a4b8c36 100644 --- a/fs/squashfs/fragment.c +++ b/fs/squashfs/fragment.c @@ -61,9 +61,7 @@ int squashfs_frag_lookup(struct super_block *sb, unsigned int fragment, return size; *fragment_block = le64_to_cpu(fragment_entry.start_block); - size = le32_to_cpu(fragment_entry.size); - - return size; + return squashfs_block_size(fragment_entry.size); } diff --git a/fs/squashfs/squashfs_fs.h b/fs/squashfs/squashfs_fs.h index 24d12fd14177..4e6853f084d0 100644 --- a/fs/squashfs/squashfs_fs.h +++ b/fs/squashfs/squashfs_fs.h @@ -129,6 +129,12 @@ #define SQUASHFS_COMPRESSED_BLOCK(B) (!((B) & SQUASHFS_COMPRESSED_BIT_BLOCK)) +static inline int squashfs_block_size(__le32 raw) +{ + u32 size = le32_to_cpu(raw); + return (size >> 25) ? -EIO : size; +} + /* * Inode number ops. Inodes consist of a compressed block number, and an * uncompressed offset within that block -- cgit v1.2.3 From 7acf9d4237c46894e0fa0492dd96314a41742e84 Mon Sep 17 00:00:00 2001 From: Dmitry Safonov Date: Fri, 27 Jul 2018 16:54:44 +0100 Subject: netlink: Do not subscribe to non-existent groups Make ABI more strict about subscribing to group > ngroups. Code doesn't check for that and it looks bogus. (one can subscribe to non-existing group) Still, it's possible to bind() to all possible groups with (-1) Cc: "David S. Miller" Cc: Herbert Xu Cc: Steffen Klassert Cc: netdev@vger.kernel.org Signed-off-by: Dmitry Safonov Signed-off-by: David S. Miller --- net/netlink/af_netlink.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index 393573a99a5a..ac805caed2e2 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -1008,6 +1008,7 @@ static int netlink_bind(struct socket *sock, struct sockaddr *addr, if (err) return err; } + groups &= (1UL << nlk->ngroups) - 1; bound = nlk->bound; if (bound) { -- cgit v1.2.3 From 25432eba9cd8f2ef5afef55be811b010a004b5fa Mon Sep 17 00:00:00 2001 From: Justin Pettit Date: Sat, 28 Jul 2018 15:26:01 -0700 Subject: openvswitch: meter: Fix setting meter id for new entries The meter code would create an entry for each new meter. However, it would not set the meter id in the new entry, so every meter would appear to have a meter id of zero. This commit properly sets the meter id when adding the entry. Fixes: 96fbc13d7e77 ("openvswitch: Add meter infrastructure") Signed-off-by: Justin Pettit Cc: Andy Zhou Signed-off-by: David S. Miller --- net/openvswitch/meter.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/net/openvswitch/meter.c b/net/openvswitch/meter.c index b891a91577f8..c038e021a591 100644 --- a/net/openvswitch/meter.c +++ b/net/openvswitch/meter.c @@ -211,6 +211,7 @@ static struct dp_meter *dp_meter_create(struct nlattr **a) if (!meter) return ERR_PTR(-ENOMEM); + meter->id = nla_get_u32(a[OVS_METER_ATTR_ID]); meter->used = div_u64(ktime_get_ns(), 1000 * 1000); meter->kbps = a[OVS_METER_ATTR_KBPS] ? 1 : 0; meter->keep_stats = !a[OVS_METER_ATTR_CLEAR]; @@ -280,6 +281,10 @@ static int ovs_meter_cmd_set(struct sk_buff *skb, struct genl_info *info) u32 meter_id; bool failed; + if (!a[OVS_METER_ATTR_ID]) { + return -ENODEV; + } + meter = dp_meter_create(a); if (IS_ERR_OR_NULL(meter)) return PTR_ERR(meter); @@ -298,11 +303,6 @@ static int ovs_meter_cmd_set(struct sk_buff *skb, struct genl_info *info) goto exit_unlock; } - if (!a[OVS_METER_ATTR_ID]) { - err = -ENODEV; - goto exit_unlock; - } - meter_id = nla_get_u32(a[OVS_METER_ATTR_ID]); /* Cannot fail after this. */ -- cgit v1.2.3 From acb1872577b346bd15ab3a3f8dff780d6cca4b70 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 29 Jul 2018 14:44:52 -0700 Subject: Linux 4.18-rc7 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 67d9d20f8564..85f3481a56d6 100644 --- a/Makefile +++ b/Makefile @@ -2,7 +2,7 @@ VERSION = 4 PATCHLEVEL = 18 SUBLEVEL = 0 -EXTRAVERSION = -rc6 +EXTRAVERSION = -rc7 NAME = Merciless Moray # *DOCUMENTATION* -- cgit v1.2.3 From 72c05f32f4a5055c9c8fe889bb6903ec959c0aad Mon Sep 17 00:00:00 2001 From: Anton Vasilyev Date: Fri, 27 Jul 2018 18:50:42 +0300 Subject: can: ems_usb: Fix memory leak on ems_usb_disconnect() ems_usb_probe() allocates memory for dev->tx_msg_buffer, but there is no its deallocation in ems_usb_disconnect(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Anton Vasilyev Cc: Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/ems_usb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/can/usb/ems_usb.c b/drivers/net/can/usb/ems_usb.c index 12ff0020ecd6..b7dfd4109d24 100644 --- a/drivers/net/can/usb/ems_usb.c +++ b/drivers/net/can/usb/ems_usb.c @@ -1072,6 +1072,7 @@ static void ems_usb_disconnect(struct usb_interface *intf) usb_free_urb(dev->intr_urb); kfree(dev->intr_in_buffer); + kfree(dev->tx_msg_buffer); } } -- cgit v1.2.3 From 279fef50b607f9cee94f10bae84f6730e97ccd7c Mon Sep 17 00:00:00 2001 From: Edward Cragg Date: Fri, 27 Jul 2018 13:59:28 +0100 Subject: ASoC: tegra: i2s: Fix typo/broken macro Fix typo in macro TEGRA30_I2S_SLOT_CTRL_TOTAL_SLOTS_MASK. Signed-off-by: Edward Cragg Signed-off-by: Jorge Sanjuan Reviewed-by: Jon Hunter Signed-off-by: Mark Brown --- sound/soc/tegra/tegra30_i2s.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/tegra/tegra30_i2s.h b/sound/soc/tegra/tegra30_i2s.h index 774fc6ad2026..2e561e946de2 100644 --- a/sound/soc/tegra/tegra30_i2s.h +++ b/sound/soc/tegra/tegra30_i2s.h @@ -173,7 +173,7 @@ /* Number of slots in frame, minus 1 */ #define TEGRA30_I2S_SLOT_CTRL_TOTAL_SLOTS_SHIFT 16 #define TEGRA30_I2S_SLOT_CTRL_TOTAL_SLOTS_MASK_US 7 -#define TEGRA30_I2S_SLOT_CTRL_TOTAL_SLOTS_MASK (TEGRA30_I2S_SLOT_CTRL_TOTAL_SLOT_MASK_US << TEGRA30_I2S_SLOT_CTRL_TOTAL_SLOT_SHIFT) +#define TEGRA30_I2S_SLOT_CTRL_TOTAL_SLOTS_MASK (TEGRA30_I2S_SLOT_CTRL_TOTAL_SLOTS_MASK_US << TEGRA30_I2S_SLOT_CTRL_TOTAL_SLOTS_SHIFT) /* TDM mode slot enable bitmask */ #define TEGRA30_I2S_SLOT_CTRL_RX_SLOT_ENABLES_SHIFT 8 -- cgit v1.2.3 From c9c9780d8fa526a124933134a7e4041fa09662f6 Mon Sep 17 00:00:00 2001 From: Ladislav Michl Date: Sat, 28 Jul 2018 14:30:17 +0200 Subject: ASoC: wm8988: fix typo in rate constraints Remove duplicated entry and add missing zero in rate constraints. Signed-off-by: Ladislav Michl Signed-off-by: Mark Brown --- sound/soc/codecs/wm8988.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/wm8988.c b/sound/soc/codecs/wm8988.c index 62200117444b..6e52c6a8bab3 100644 --- a/sound/soc/codecs/wm8988.c +++ b/sound/soc/codecs/wm8988.c @@ -522,7 +522,7 @@ static inline int get_coeff(int mclk, int rate) /* The set of rates we can generate from the above for each SYSCLK */ static const unsigned int rates_12288[] = { - 8000, 12000, 16000, 24000, 24000, 32000, 48000, 96000, + 8000, 12000, 16000, 24000, 32000, 48000, 96000, }; static const struct snd_pcm_hw_constraint_list constraints_12288 = { @@ -540,7 +540,7 @@ static const struct snd_pcm_hw_constraint_list constraints_112896 = { }; static const unsigned int rates_12[] = { - 8000, 11025, 12000, 16000, 22050, 2400, 32000, 41100, 48000, + 8000, 11025, 12000, 16000, 22050, 24000, 32000, 41100, 48000, 48000, 88235, 96000, }; -- cgit v1.2.3 From afc9f65e01cd114cb2cedf544d22239116ce0cc6 Mon Sep 17 00:00:00 2001 From: Vincent Whitchurch Date: Fri, 13 Jul 2018 11:12:22 +0100 Subject: ARM: 8781/1: Fix Thumb-2 syscall return for binutils 2.29+ When building the kernel as Thumb-2 with binutils 2.29 or newer, if the assembler has seen the .type directive (via ENDPROC()) for a symbol, it automatically handles the setting of the lowest bit when the symbol is used with ADR. The badr macro on the other hand handles this lowest bit manually. This leads to a jump to a wrong address in the wrong state in the syscall return path: Internal error: Oops - undefined instruction: 0 [#2] SMP THUMB2 Modules linked in: CPU: 0 PID: 652 Comm: modprobe Tainted: G D 4.18.0-rc3+ #8 PC is at ret_fast_syscall+0x4/0x62 LR is at sys_brk+0x109/0x128 pc : [<80101004>] lr : [<801c8a35>] psr: 60000013 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 50c5387d Table: 9e82006a DAC: 00000051 Process modprobe (pid: 652, stack limit = 0x(ptrval)) 80101000 : 80101000: b672 cpsid i 80101002: f8d9 2008 ldr.w r2, [r9, #8] 80101006: f1b2 4ffe cmp.w r2, #2130706432 ; 0x7f000000 80101184 : 80101184: f8d9 a000 ldr.w sl, [r9] 80101188: e92d 0030 stmdb sp!, {r4, r5} 8010118c: f01a 0ff0 tst.w sl, #240 ; 0xf0 80101190: d117 bne.n 801011c2 <__sys_trace> 80101192: 46ba mov sl, r7 80101194: f5ba 7fc8 cmp.w sl, #400 ; 0x190 80101198: bf28 it cs 8010119a: f04f 0a00 movcs.w sl, #0 8010119e: f3af 8014 nop.w {20} 801011a2: f2af 1ea2 subw lr, pc, #418 ; 0x1a2 To fix this, add a new symbol name which doesn't have ENDPROC used on it and use that with badr. We can't remove the badr usage since that would would cause breakage with older binutils. Signed-off-by: Vincent Whitchurch Signed-off-by: Russell King --- arch/arm/kernel/entry-common.S | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 106a1466518d..746565a876dc 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -48,6 +48,7 @@ saved_pc .req lr * from those features make this path too inefficient. */ ret_fast_syscall: +__ret_fast_syscall: UNWIND(.fnstart ) UNWIND(.cantunwind ) disable_irq_notrace @ disable interrupts @@ -78,6 +79,7 @@ fast_work_pending: * call. */ ret_fast_syscall: +__ret_fast_syscall: UNWIND(.fnstart ) UNWIND(.cantunwind ) str r0, [sp, #S_R0 + S_OFF]! @ save returned r0 @@ -255,7 +257,7 @@ local_restart: tst r10, #_TIF_SYSCALL_WORK @ are we tracing syscalls? bne __sys_trace - invoke_syscall tbl, scno, r10, ret_fast_syscall + invoke_syscall tbl, scno, r10, __ret_fast_syscall add r1, sp, #S_OFF 2: cmp scno, #(__ARM_NR_BASE - __NR_SYSCALL_BASE) -- cgit v1.2.3 From 345a9ca37aa69bb3133c1a8390a71f993abcef0c Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 30 Jul 2018 08:46:40 +0200 Subject: ALSA: memalloc: Fix missing PAGE_SIZE definition The recent fix moved the inline snd_sgbuf_aligned_pages() outside the ifdef, and this triggered a build error on some architectures due to the undefined PAGE_SIZE, as spotted by 0day bot. Fix it by adding the missing header inclusion. Fixes: 4cae99d9b530 ("ALSA: memalloc: declare snd_sgbuf_aligned_pages() unconditionally") Reported-by: kbuild test robot Cc: Pierre-Louis Bossart Signed-off-by: Takashi Iwai Signed-off-by: Mark Brown --- include/sound/memalloc.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/sound/memalloc.h b/include/sound/memalloc.h index c669900e6cbe..67561b997915 100644 --- a/include/sound/memalloc.h +++ b/include/sound/memalloc.h @@ -24,6 +24,8 @@ #ifndef __SOUND_MEMALLOC_H #define __SOUND_MEMALLOC_H +#include + struct device; /* -- cgit v1.2.3 From fe209b97184f577b70ae0799c2b149be36092f84 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 30 Jul 2018 07:51:41 +0000 Subject: ASoC: ak4642: convert to SPDX identifiers As original license mentioned, it is GPL-2.0 in SPDX. Then, MODULE_LICENSE() should be "GPL v2" instead of "GPL". See ${LINUX}/include/linux/module.h "GPL" [GNU Public License v2 or later] "GPL v2" [GNU Public License v2] Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- sound/soc/codecs/ak4642.c | 26 +++++++++++--------------- 1 file changed, 11 insertions(+), 15 deletions(-) diff --git a/sound/soc/codecs/ak4642.c b/sound/soc/codecs/ak4642.c index 605055964529..353237025514 100644 --- a/sound/soc/codecs/ak4642.c +++ b/sound/soc/codecs/ak4642.c @@ -1,17 +1,13 @@ -/* - * ak4642.c -- AK4642/AK4643 ALSA Soc Audio driver - * - * Copyright (C) 2009 Renesas Solutions Corp. - * Kuninori Morimoto - * - * Based on wm8731.c by Richard Purdie - * Based on ak4535.c by Richard Purdie - * Based on wm8753.c by Liam Girdwood - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// ak4642.c -- AK4642/AK4643 ALSA Soc Audio driver +// +// Copyright (C) 2009 Renesas Solutions Corp. +// Kuninori Morimoto +// +// Based on wm8731.c by Richard Purdie +// Based on ak4535.c by Richard Purdie +// Based on wm8753.c by Liam Girdwood /* ** CAUTION ** * @@ -709,4 +705,4 @@ module_i2c_driver(ak4642_i2c_driver); MODULE_DESCRIPTION("Soc AK4642 driver"); MODULE_AUTHOR("Kuninori Morimoto "); -MODULE_LICENSE("GPL"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3 From 7a968dc66aecaaea3424ca2525b758687b39bc0e Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 30 Jul 2018 07:52:15 +0000 Subject: ASoC: ak4554: convert to SPDX identifiers As original license mentioned, it is GPL-2.0 in SPDX. Then, MODULE_LICENSE() should be "GPL v2" instead of "GPL". See ${LINUX}/include/linux/module.h "GPL" [GNU Public License v2 or later] "GPL v2" [GNU Public License v2] Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- sound/soc/codecs/ak4554.c | 17 ++++++----------- 1 file changed, 6 insertions(+), 11 deletions(-) diff --git a/sound/soc/codecs/ak4554.c b/sound/soc/codecs/ak4554.c index b7ee13406d93..2fa83a1a84cf 100644 --- a/sound/soc/codecs/ak4554.c +++ b/sound/soc/codecs/ak4554.c @@ -1,13 +1,8 @@ -/* - * ak4554.c - * - * Copyright (C) 2013 Renesas Solutions Corp. - * Kuninori Morimoto - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// ak4554.c +// +// Copyright (C) 2013 Renesas Solutions Corp. +// Kuninori Morimoto #include #include @@ -97,6 +92,6 @@ static struct platform_driver ak4554_driver = { }; module_platform_driver(ak4554_driver); -MODULE_LICENSE("GPL"); +MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("SoC AK4554 driver"); MODULE_AUTHOR("Kuninori Morimoto "); -- cgit v1.2.3 From c0ca5604d43233b0f5cfb793be9638af21f5535d Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 30 Jul 2018 07:52:46 +0000 Subject: ASoC: da7210: convert to SPDX identifiers Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- sound/soc/codecs/da7210.c | 27 +++++++++++---------------- 1 file changed, 11 insertions(+), 16 deletions(-) diff --git a/sound/soc/codecs/da7210.c b/sound/soc/codecs/da7210.c index a664111b7184..e172913d04a4 100644 --- a/sound/soc/codecs/da7210.c +++ b/sound/soc/codecs/da7210.c @@ -1,19 +1,14 @@ -/* - * DA7210 ALSA Soc codec driver - * - * Copyright (c) 2009 Dialog Semiconductor - * Written by David Chen - * - * Copyright (C) 2009 Renesas Solutions Corp. - * Cleanups by Kuninori Morimoto - * - * Tested on SuperH Ecovec24 board with S16/S24 LE in 48KHz using I2S - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ +// SPDX-License-Identifier: GPL-2.0+ +// +// DA7210 ALSA Soc codec driver +// +// Copyright (c) 2009 Dialog Semiconductor +// Written by David Chen +// +// Copyright (C) 2009 Renesas Solutions Corp. +// Cleanups by Kuninori Morimoto +// +// Tested on SuperH Ecovec24 board with S16/S24 LE in 48KHz using I2S #include #include -- cgit v1.2.3 From e028937c77f44bb38cdbc464afce2bf41d96006b Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 30 Jul 2018 07:53:08 +0000 Subject: ASoC: ak4613: convert to SPDX identifiers Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- sound/soc/codecs/ak4613.c | 26 +++++++++++--------------- 1 file changed, 11 insertions(+), 15 deletions(-) diff --git a/sound/soc/codecs/ak4613.c b/sound/soc/codecs/ak4613.c index 8523ff9351cf..c1181a20714d 100644 --- a/sound/soc/codecs/ak4613.c +++ b/sound/soc/codecs/ak4613.c @@ -1,18 +1,14 @@ -/* - * ak4613.c -- Asahi Kasei ALSA Soc Audio driver - * - * Copyright (C) 2015 Renesas Electronics Corporation - * Kuninori Morimoto - * - * Based on ak4642.c by Kuninori Morimoto - * Based on wm8731.c by Richard Purdie - * Based on ak4535.c by Richard Purdie - * Based on wm8753.c by Liam Girdwood - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ +// SPDX-License-Identifier: GPL-2.0 +// +// ak4613.c -- Asahi Kasei ALSA Soc Audio driver +// +// Copyright (C) 2015 Renesas Electronics Corporation +// Kuninori Morimoto +// +// Based on ak4642.c by Kuninori Morimoto +// Based on wm8731.c by Richard Purdie +// Based on ak4535.c by Richard Purdie +// Based on wm8753.c by Liam Girdwood #include #include -- cgit v1.2.3 From 7464d3faf62a5adcb99f4f8ea9baabda78aed4aa Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 30 Jul 2018 08:00:22 +0000 Subject: ASoC: sh: Kconfig: convert to SPDX identifiers By default all files without license information are under the default license of the kernel, which is GPL version 2. Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- sound/soc/sh/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/sh/Kconfig b/sound/soc/sh/Kconfig index 0ae0800bf3a8..dc20f0f7080a 100644 --- a/sound/soc/sh/Kconfig +++ b/sound/soc/sh/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 menu "SoC Audio support for Renesas SoCs" depends on SUPERH || ARCH_RENESAS || COMPILE_TEST -- cgit v1.2.3 From 4321723648b0abb456f7a9af51bb09a4ec60799d Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Sat, 28 Jul 2018 00:06:59 +0300 Subject: ASoC: tegra_alc5632: fix device_node refcounting tegra_alc5632_probe() increments reference count of device nodes with of_parse_phandle(), but there is no code decrementing them in the driver. The patch adds of_node_put() to tegra_alc5632_remove() and to error handling paths in the probe. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Acked-by: Jon Hunter Signed-off-by: Mark Brown --- sound/soc/tegra/tegra_alc5632.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) diff --git a/sound/soc/tegra/tegra_alc5632.c b/sound/soc/tegra/tegra_alc5632.c index 5197d6b18cb6..98d87801d57a 100644 --- a/sound/soc/tegra/tegra_alc5632.c +++ b/sound/soc/tegra/tegra_alc5632.c @@ -190,14 +190,14 @@ static int tegra_alc5632_probe(struct platform_device *pdev) dev_err(&pdev->dev, "Property 'nvidia,i2s-controller' missing or invalid\n"); ret = -EINVAL; - goto err; + goto err_put_codec_of_node; } tegra_alc5632_dai.platform_of_node = tegra_alc5632_dai.cpu_of_node; ret = tegra_asoc_utils_init(&alc5632->util_data, &pdev->dev); if (ret) - goto err; + goto err_put_cpu_of_node; ret = snd_soc_register_card(card); if (ret) { @@ -210,6 +210,13 @@ static int tegra_alc5632_probe(struct platform_device *pdev) err_fini_utils: tegra_asoc_utils_fini(&alc5632->util_data); +err_put_cpu_of_node: + of_node_put(tegra_alc5632_dai.cpu_of_node); + tegra_alc5632_dai.cpu_of_node = NULL; + tegra_alc5632_dai.platform_of_node = NULL; +err_put_codec_of_node: + of_node_put(tegra_alc5632_dai.codec_of_node); + tegra_alc5632_dai.codec_of_node = NULL; err: return ret; } @@ -223,6 +230,12 @@ static int tegra_alc5632_remove(struct platform_device *pdev) tegra_asoc_utils_fini(&machine->util_data); + of_node_put(tegra_alc5632_dai.cpu_of_node); + tegra_alc5632_dai.cpu_of_node = NULL; + tegra_alc5632_dai.platform_of_node = NULL; + of_node_put(tegra_alc5632_dai.codec_of_node); + tegra_alc5632_dai.codec_of_node = NULL; + return 0; } -- cgit v1.2.3 From ae1c696a480c67c45fb23b35162183f72c6be0e1 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Thu, 26 Jul 2018 15:49:10 -0500 Subject: ASoC: sirf: Fix potential NULL pointer dereference There is a potential execution path in which function platform_get_resource() returns NULL. If this happens, we will end up having a NULL pointer dereference. Fix this by replacing devm_ioremap with devm_ioremap_resource, which has the NULL check and the memory region request. This code was detected with the help of Coccinelle. Cc: stable@vger.kernel.org Fixes: 2bd8d1d5cf89 ("ASoC: sirf: Add audio usp interface driver") Signed-off-by: Gustavo A. R. Silva Signed-off-by: Mark Brown --- sound/soc/sirf/sirf-usp.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/sound/soc/sirf/sirf-usp.c b/sound/soc/sirf/sirf-usp.c index 77e7dcf969d0..d70fcd4a1adf 100644 --- a/sound/soc/sirf/sirf-usp.c +++ b/sound/soc/sirf/sirf-usp.c @@ -370,10 +370,9 @@ static int sirf_usp_pcm_probe(struct platform_device *pdev) platform_set_drvdata(pdev, usp); mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - base = devm_ioremap(&pdev->dev, mem_res->start, - resource_size(mem_res)); - if (base == NULL) - return -ENOMEM; + base = devm_ioremap_resource(&pdev->dev, mem_res); + if (IS_ERR(base)) + return PTR_ERR(base); usp->regmap = devm_regmap_init_mmio(&pdev->dev, base, &sirf_usp_regmap_config); if (IS_ERR(usp->regmap)) -- cgit v1.2.3 From 8fc9983db199bb397d48e32a6400765b70f1995a Mon Sep 17 00:00:00 2001 From: Katsuhiro Suzuki Date: Fri, 27 Jul 2018 11:37:28 +0900 Subject: ASoC: uniphier: add support for multichannel output This patch adds multichannel PCM output support for LD11/LD20. Currently driver tested and supported only 2ch, 6ch, and 8ch. Signed-off-by: Katsuhiro Suzuki Signed-off-by: Mark Brown --- sound/soc/uniphier/aio-core.c | 78 ++++++++++++++++++++++++++++++++++++++++--- sound/soc/uniphier/aio-ld11.c | 2 +- sound/soc/uniphier/aio-reg.h | 1 + sound/soc/uniphier/aio.h | 3 ++ 4 files changed, 78 insertions(+), 6 deletions(-) diff --git a/sound/soc/uniphier/aio-core.c b/sound/soc/uniphier/aio-core.c index 638cb3fc5f7b..8b09bbb0f8d0 100644 --- a/sound/soc/uniphier/aio-core.c +++ b/sound/soc/uniphier/aio-core.c @@ -264,6 +264,57 @@ void aio_port_reset(struct uniphier_aio_sub *sub) } } +/** + * aio_port_set_ch - set channels of LPCM + * @sub: the AIO substream pointer, PCM substream only + * @ch : count of channels + * + * Set suitable slot selecting to input/output port block of AIO. + * + * This function may return error if non-PCM substream. + * + * Return: Zero if successful, otherwise a negative value on error. + */ +static int aio_port_set_ch(struct uniphier_aio_sub *sub) +{ + struct regmap *r = sub->aio->chip->regmap; + u32 slotsel_2ch[] = { + 0, 0, 0, 0, 0, + }; + u32 slotsel_multi[] = { + OPORTMXTYSLOTCTR_SLOTSEL_SLOT0, + OPORTMXTYSLOTCTR_SLOTSEL_SLOT1, + OPORTMXTYSLOTCTR_SLOTSEL_SLOT2, + OPORTMXTYSLOTCTR_SLOTSEL_SLOT3, + OPORTMXTYSLOTCTR_SLOTSEL_SLOT4, + }; + u32 mode, *slotsel; + int i; + + switch (params_channels(&sub->params)) { + case 8: + case 6: + mode = OPORTMXTYSLOTCTR_MODE; + slotsel = slotsel_multi; + break; + case 2: + mode = 0; + slotsel = slotsel_2ch; + break; + default: + return -EINVAL; + } + + for (i = 0; i < AUD_MAX_SLOTSEL; i++) { + regmap_update_bits(r, OPORTMXTYSLOTCTR(sub->swm->oport.map, i), + OPORTMXTYSLOTCTR_MODE, mode); + regmap_update_bits(r, OPORTMXTYSLOTCTR(sub->swm->oport.map, i), + OPORTMXTYSLOTCTR_SLOTSEL_MASK, slotsel[i]); + } + + return 0; +} + /** * aio_port_set_rate - set sampling rate of LPCM * @sub: the AIO substream pointer, PCM substream only @@ -575,6 +626,10 @@ int aio_port_set_param(struct uniphier_aio_sub *sub, int pass_through, rate = params_rate(params); } + ret = aio_port_set_ch(sub); + if (ret) + return ret; + ret = aio_port_set_rate(sub, rate); if (ret) return ret; @@ -731,15 +786,28 @@ void aio_port_set_volume(struct uniphier_aio_sub *sub, int vol) int aio_if_set_param(struct uniphier_aio_sub *sub, int pass_through) { struct regmap *r = sub->aio->chip->regmap; - u32 v; + u32 memfmt, v; if (sub->swm->dir == PORT_DIR_OUTPUT) { - if (pass_through) + if (pass_through) { v = PBOUTMXCTR0_ENDIAN_0123 | PBOUTMXCTR0_MEMFMT_STREAM; - else - v = PBOUTMXCTR0_ENDIAN_3210 | - PBOUTMXCTR0_MEMFMT_2CH; + } else { + switch (params_channels(&sub->params)) { + case 2: + memfmt = PBOUTMXCTR0_MEMFMT_2CH; + break; + case 6: + memfmt = PBOUTMXCTR0_MEMFMT_6CH; + break; + case 8: + memfmt = PBOUTMXCTR0_MEMFMT_8CH; + break; + default: + return -EINVAL; + } + v = PBOUTMXCTR0_ENDIAN_3210 | memfmt; + } regmap_write(r, PBOUTMXCTR0(sub->swm->oif.map), v); regmap_write(r, PBOUTMXCTR1(sub->swm->oif.map), 0); diff --git a/sound/soc/uniphier/aio-ld11.c b/sound/soc/uniphier/aio-ld11.c index ab04d3331be9..de962df245ba 100644 --- a/sound/soc/uniphier/aio-ld11.c +++ b/sound/soc/uniphier/aio-ld11.c @@ -286,7 +286,7 @@ static struct snd_soc_dai_driver uniphier_aio_dai_ld11[] = { .formats = SNDRV_PCM_FMTBIT_S32_LE, .rates = SNDRV_PCM_RATE_48000, .channels_min = 2, - .channels_max = 2, + .channels_max = 8, }, .ops = &uniphier_aio_i2s_ops, }, diff --git a/sound/soc/uniphier/aio-reg.h b/sound/soc/uniphier/aio-reg.h index 45fdc6ae358a..734395dbcffb 100644 --- a/sound/soc/uniphier/aio-reg.h +++ b/sound/soc/uniphier/aio-reg.h @@ -374,6 +374,7 @@ #define OPORTMXTYVOLGAINSTATUS(n, m) (0x42108 + 0x400 * (n) + 0x20 * (m)) #define OPORTMXTYVOLGAINSTATUS_CUR_MASK GENMASK(15, 0) #define OPORTMXTYSLOTCTR(n, m) (0x42114 + 0x400 * (n) + 0x20 * (m)) +#define OPORTMXTYSLOTCTR_MODE BIT(15) #define OPORTMXTYSLOTCTR_SLOTSEL_MASK GENMASK(11, 8) #define OPORTMXTYSLOTCTR_SLOTSEL_SLOT0 (0x8 << 8) #define OPORTMXTYSLOTCTR_SLOTSEL_SLOT1 (0x9 << 8) diff --git a/sound/soc/uniphier/aio.h b/sound/soc/uniphier/aio.h index aa89c2f6fa24..23a5c3c68658 100644 --- a/sound/soc/uniphier/aio.h +++ b/sound/soc/uniphier/aio.h @@ -141,6 +141,9 @@ enum IEC61937_PC { #define AUD_MIN_FRAGMENT_SIZE (4 * 1024) #define AUD_MAX_FRAGMENT_SIZE (16 * 1024) +/* max 5 slots, 10 channels, 2 channel in 1 slot */ +#define AUD_MAX_SLOTSEL 5 + /* * This is a selector for virtual register map of AIO. * -- cgit v1.2.3 From d8504acca759ae672c6d34d49a33d54ace094cbb Mon Sep 17 00:00:00 2001 From: Katsuhiro Suzuki Date: Fri, 27 Jul 2018 11:37:44 +0900 Subject: ASoC: uniphier: change functions to static This patch changes some functions that are not used by other objects to static. Signed-off-by: Katsuhiro Suzuki Signed-off-by: Mark Brown --- sound/soc/uniphier/aio-core.c | 6 +++--- sound/soc/uniphier/aio.h | 3 --- 2 files changed, 3 insertions(+), 6 deletions(-) diff --git a/sound/soc/uniphier/aio-core.c b/sound/soc/uniphier/aio-core.c index 8b09bbb0f8d0..9bcba06ba52e 100644 --- a/sound/soc/uniphier/aio-core.c +++ b/sound/soc/uniphier/aio-core.c @@ -327,7 +327,7 @@ static int aio_port_set_ch(struct uniphier_aio_sub *sub) * * Return: Zero if successful, otherwise a negative value on error. */ -int aio_port_set_rate(struct uniphier_aio_sub *sub, int rate) +static int aio_port_set_rate(struct uniphier_aio_sub *sub, int rate) { struct regmap *r = sub->aio->chip->regmap; struct device *dev = &sub->aio->chip->pdev->dev; @@ -446,7 +446,7 @@ int aio_port_set_rate(struct uniphier_aio_sub *sub, int rate) * * Return: Zero if successful, otherwise a negative value on error. */ -int aio_port_set_fmt(struct uniphier_aio_sub *sub) +static int aio_port_set_fmt(struct uniphier_aio_sub *sub) { struct regmap *r = sub->aio->chip->regmap; struct device *dev = &sub->aio->chip->pdev->dev; @@ -511,7 +511,7 @@ int aio_port_set_fmt(struct uniphier_aio_sub *sub) * * Return: Zero if successful, otherwise a negative value on error. */ -int aio_port_set_clk(struct uniphier_aio_sub *sub) +static int aio_port_set_clk(struct uniphier_aio_sub *sub) { struct uniphier_aio_chip *chip = sub->aio->chip; struct device *dev = &sub->aio->chip->pdev->dev; diff --git a/sound/soc/uniphier/aio.h b/sound/soc/uniphier/aio.h index 23a5c3c68658..ca6ccbae0ee8 100644 --- a/sound/soc/uniphier/aio.h +++ b/sound/soc/uniphier/aio.h @@ -325,9 +325,6 @@ int aio_chip_set_pll(struct uniphier_aio_chip *chip, int pll_id, void aio_chip_init(struct uniphier_aio_chip *chip); int aio_init(struct uniphier_aio_sub *sub); void aio_port_reset(struct uniphier_aio_sub *sub); -int aio_port_set_rate(struct uniphier_aio_sub *sub, int rate); -int aio_port_set_fmt(struct uniphier_aio_sub *sub); -int aio_port_set_clk(struct uniphier_aio_sub *sub); int aio_port_set_param(struct uniphier_aio_sub *sub, int pass_through, const struct snd_pcm_hw_params *params); void aio_port_set_enable(struct uniphier_aio_sub *sub, int enable); -- cgit v1.2.3 From f5dbee6e3881b1dbfdcc36008d48bd29549ab2f4 Mon Sep 17 00:00:00 2001 From: Sean Young Date: Sat, 28 Jul 2018 05:11:15 -0400 Subject: media: rc: read out of bounds if bpf reports high protocol number The repeat period is read from a static array. If a keydown event is reported from bpf with a high protocol number, we read out of bounds. This is unlikely to end up with a reasonable repeat period at the best of times, in which case no timely key up event is generated. Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/rc-main.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c index 2e222d9ee01f..ca68e1d2b2f9 100644 --- a/drivers/media/rc/rc-main.c +++ b/drivers/media/rc/rc-main.c @@ -679,6 +679,14 @@ static void ir_timer_repeat(struct timer_list *t) spin_unlock_irqrestore(&dev->keylock, flags); } +static unsigned int repeat_period(int protocol) +{ + if (protocol >= ARRAY_SIZE(protocols)) + return 100; + + return protocols[protocol].repeat_period; +} + /** * rc_repeat() - signals that a key is still pressed * @dev: the struct rc_dev descriptor of the device @@ -691,7 +699,7 @@ void rc_repeat(struct rc_dev *dev) { unsigned long flags; unsigned int timeout = nsecs_to_jiffies(dev->timeout) + - msecs_to_jiffies(protocols[dev->last_protocol].repeat_period); + msecs_to_jiffies(repeat_period(dev->last_protocol)); struct lirc_scancode sc = { .scancode = dev->last_scancode, .rc_proto = dev->last_protocol, .keycode = dev->keypressed ? dev->last_keycode : KEY_RESERVED, @@ -803,7 +811,7 @@ void rc_keydown(struct rc_dev *dev, enum rc_proto protocol, u32 scancode, if (dev->keypressed) { dev->keyup_jiffies = jiffies + nsecs_to_jiffies(dev->timeout) + - msecs_to_jiffies(protocols[protocol].repeat_period); + msecs_to_jiffies(repeat_period(protocol)); mod_timer(&dev->timer_keyup, dev->keyup_jiffies); } spin_unlock_irqrestore(&dev->keylock, flags); -- cgit v1.2.3 From 8eb0e6421958e9777db98448a4030d8ae940c9a0 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 27 Jul 2018 13:19:45 -0400 Subject: media: v4l: vsp1: Fix deadlock in VSPDL DRM pipelines The VSP uses a lock to protect the BRU and BRS assignment when configuring pipelines. The lock is taken in vsp1_du_atomic_begin() and released in vsp1_du_atomic_flush(), as well as taken and released in vsp1_du_setup_lif(). This guards against multiple pipelines trying to assign the same BRU and BRS at the same time. The DRM framework calls the .atomic_begin() operations in a loop over all CRTCs included in an atomic commit. On a VSPDL (the only VSP type where this matters), a single VSP instance handles two CRTCs, with a single lock. This results in a deadlock when the .atomic_begin() operation is called on the second CRTC. The DRM framework serializes atomic commits that affect the same CRTCs, but doesn't know about two CRTCs sharing the same VSPDL. Two commits affecting the VSPDL LIF0 and LIF1 respectively can thus race each other, hence the need for a lock. This could be fixed on the DRM side by forcing serialization of commits affecting CRTCs backed by the same VSPDL, but that would negatively affect performances, as the locking is only needed when the BRU and BRS need to be reassigned, which is an uncommon case. The lock protects the whole .atomic_begin() to .atomic_flush() sequence. The only operation that can occur in-between is vsp1_du_atomic_update(), which doesn't touch the BRU and BRS, and thus doesn't need to be protected by the lock. We can thus only take the lock around the pipeline setup calls in vsp1_du_atomic_flush(), which fixes the deadlock. Fixes: f81f9adc4ee1 ("media: v4l: vsp1: Assign BRU and BRS to pipelines dynamically") Signed-off-by: Laurent Pinchart Reviewed-by: Kieran Bingham Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/vsp1/vsp1_drm.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/media/platform/vsp1/vsp1_drm.c b/drivers/media/platform/vsp1/vsp1_drm.c index edb35a5c57ea..a99fc0ced7a7 100644 --- a/drivers/media/platform/vsp1/vsp1_drm.c +++ b/drivers/media/platform/vsp1/vsp1_drm.c @@ -728,9 +728,6 @@ EXPORT_SYMBOL_GPL(vsp1_du_setup_lif); */ void vsp1_du_atomic_begin(struct device *dev, unsigned int pipe_index) { - struct vsp1_device *vsp1 = dev_get_drvdata(dev); - - mutex_lock(&vsp1->drm->lock); } EXPORT_SYMBOL_GPL(vsp1_du_atomic_begin); @@ -846,6 +843,7 @@ void vsp1_du_atomic_flush(struct device *dev, unsigned int pipe_index, drm_pipe->crc = cfg->crc; + mutex_lock(&vsp1->drm->lock); vsp1_du_pipeline_setup_inputs(vsp1, pipe); vsp1_du_pipeline_configure(pipe); mutex_unlock(&vsp1->drm->lock); -- cgit v1.2.3 From 89da619bc18d79bca5304724c11d4ba3b67ce2c6 Mon Sep 17 00:00:00 2001 From: Jiang Biao Date: Wed, 18 Jul 2018 10:29:28 +0800 Subject: virtio_balloon: fix another race between migration and ballooning Kernel panic when with high memory pressure, calltrace looks like, PID: 21439 TASK: ffff881be3afedd0 CPU: 16 COMMAND: "java" #0 [ffff881ec7ed7630] machine_kexec at ffffffff81059beb #1 [ffff881ec7ed7690] __crash_kexec at ffffffff81105942 #2 [ffff881ec7ed7760] crash_kexec at ffffffff81105a30 #3 [ffff881ec7ed7778] oops_end at ffffffff816902c8 #4 [ffff881ec7ed77a0] no_context at ffffffff8167ff46 #5 [ffff881ec7ed77f0] __bad_area_nosemaphore at ffffffff8167ffdc #6 [ffff881ec7ed7838] __node_set at ffffffff81680300 #7 [ffff881ec7ed7860] __do_page_fault at ffffffff8169320f #8 [ffff881ec7ed78c0] do_page_fault at ffffffff816932b5 #9 [ffff881ec7ed78f0] page_fault at ffffffff8168f4c8 [exception RIP: _raw_spin_lock_irqsave+47] RIP: ffffffff8168edef RSP: ffff881ec7ed79a8 RFLAGS: 00010046 RAX: 0000000000000246 RBX: ffffea0019740d00 RCX: ffff881ec7ed7fd8 RDX: 0000000000020000 RSI: 0000000000000016 RDI: 0000000000000008 RBP: ffff881ec7ed79a8 R8: 0000000000000246 R9: 000000000001a098 R10: ffff88107ffda000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000008 R14: ffff881ec7ed7a80 R15: ffff881be3afedd0 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 It happens in the pagefault and results in double pagefault during compacting pages when memory allocation fails. Analysed the vmcore, the page leads to second pagefault is corrupted with _mapcount=-256, but private=0. It's caused by the race between migration and ballooning, and lock missing in virtballoon_migratepage() of virtio_balloon driver. This patch fix the bug. Fixes: e22504296d4f64f ("virtio_balloon: introduce migration primitives to balloon pages") Cc: stable@vger.kernel.org Signed-off-by: Jiang Biao Signed-off-by: Huang Chong Signed-off-by: Michael S. Tsirkin --- drivers/virtio/virtio_balloon.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c index 6b237e3f4983..3988c0914322 100644 --- a/drivers/virtio/virtio_balloon.c +++ b/drivers/virtio/virtio_balloon.c @@ -513,7 +513,9 @@ static int virtballoon_migratepage(struct balloon_dev_info *vb_dev_info, tell_host(vb, vb->inflate_vq); /* balloon's page migration 2nd step -- deflate "page" */ + spin_lock_irqsave(&vb_dev_info->pages_lock, flags); balloon_page_delete(page); + spin_unlock_irqrestore(&vb_dev_info->pages_lock, flags); vb->num_pfns = VIRTIO_BALLOON_PAGES_PER_PAGE; set_page_pfns(vb, vb->pfns, page); tell_host(vb, vb->deflate_vq); -- cgit v1.2.3 From 2c3ee0e1779d2e08bc08734bc8475daaf94d0ba4 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Mon, 30 Jul 2018 11:41:56 -0300 Subject: tools headers uapi: Update tools's copy of linux/perf_event.h To get the changes in: 6cbc304f2f36 ("perf/x86/intel: Fix unwind errors from PEBS entries (mk-II)") That do not imply any changes in the tooling side, the (ab)use of sample_type is entirely done in kernel space, nothing for userspace to witness here. This cures the following warning during perf's build: Warning: Kernel ABI header at 'tools/include/uapi/linux/perf_event.h' differs from latest version at 'include/uapi/linux/perf_event.h' Cc: Adrian Hunter Cc: Alexander Shishkin Cc: David Ahern Cc: Jiri Olsa Cc: Josh Poimboeuf Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Prashant Bhole Cc: Stephane Eranian Cc: Thomas Gleixner Cc: Vince Weaver Cc: Wang Nan Link: https://lkml.kernel.org/n/tip-o64mjoy35s9gd1gitunw1zg4@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/include/uapi/linux/perf_event.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/include/uapi/linux/perf_event.h b/tools/include/uapi/linux/perf_event.h index b8e288a1f740..eeb787b1c53c 100644 --- a/tools/include/uapi/linux/perf_event.h +++ b/tools/include/uapi/linux/perf_event.h @@ -143,6 +143,8 @@ enum perf_event_sample_format { PERF_SAMPLE_PHYS_ADDR = 1U << 19, PERF_SAMPLE_MAX = 1U << 20, /* non-ABI */ + + __PERF_SAMPLE_CALLCHAIN_EARLY = 1ULL << 63, }; /* -- cgit v1.2.3 From 7def16d1d2668a4a3663291c9ace307b81934704 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Mon, 30 Jul 2018 11:48:19 -0300 Subject: tools headers powerpc: Update asm/unistd.h copy to pick new The new 'io_pgetevents' syscall was wired up in PowerPC in the following cset: b2f82565f2ca ("powerpc: Wire up io_pgetevents") Update tools/arch/powerpc/ copy of the asm/unistd.h file so that 'perf trace' on PowerPC gets it in its syscall table. This elliminated the following perf build warning: Warning: Kernel ABI header at 'tools/arch/powerpc/include/uapi/asm/unistd.h' differs from latest version at 'arch/powerpc/include/uapi/asm/unistd.h' Cc: Alexander Shishkin Cc: Breno Leitao Cc: Hendrik Brueckner Cc: Jiri Olsa Cc: linuxppc-dev@lists.ozlabs.org Cc: Michael Ellerman Cc: Namhyung Kim Cc: Ravi Bangoria Cc: Thomas Richter Link: https://lkml.kernel.org/n/tip-9uvu7tz4ud3bxxfyxwryuz47@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/arch/powerpc/include/uapi/asm/unistd.h | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/arch/powerpc/include/uapi/asm/unistd.h b/tools/arch/powerpc/include/uapi/asm/unistd.h index ac5ba55066dd..985534d0b448 100644 --- a/tools/arch/powerpc/include/uapi/asm/unistd.h +++ b/tools/arch/powerpc/include/uapi/asm/unistd.h @@ -399,5 +399,6 @@ #define __NR_pkey_free 385 #define __NR_pkey_mprotect 386 #define __NR_rseq 387 +#define __NR_io_pgetevents 388 #endif /* _UAPI_ASM_POWERPC_UNISTD_H_ */ -- cgit v1.2.3 From fc73bfd6005c7fe5c3a2f04d4db7fa5d37cd3ebd Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Mon, 30 Jul 2018 11:56:13 -0300 Subject: tools headers uapi: Refresh linux/bpf.h copy To get the changes in: 4c79579b44b1 ("bpf: Change bpf_fib_lookup to return lookup status") That do not entail changes in tools/perf/ use of it, elliminating the following perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/bpf.h' differs from latest version at 'include/uapi/linux/bpf.h' Cc: Adrian Hunter Cc: Daniel Borkmann Cc: David Ahern Cc: Jiri Olsa Cc: Namhyung Kim Cc: Wang Nan Link: https://lkml.kernel.org/n/tip-yei494y6b3mn6bjzz9g0ws12@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/include/uapi/linux/bpf.h | 28 +++++++++++++++++++++++----- 1 file changed, 23 insertions(+), 5 deletions(-) diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h index 59b19b6a40d7..b7db3261c62d 100644 --- a/tools/include/uapi/linux/bpf.h +++ b/tools/include/uapi/linux/bpf.h @@ -1857,7 +1857,8 @@ union bpf_attr { * is resolved), the nexthop address is returned in ipv4_dst * or ipv6_dst based on family, smac is set to mac address of * egress device, dmac is set to nexthop mac address, rt_metric - * is set to metric from route (IPv4/IPv6 only). + * is set to metric from route (IPv4/IPv6 only), and ifindex + * is set to the device index of the nexthop from the FIB lookup. * * *plen* argument is the size of the passed in struct. * *flags* argument can be a combination of one or more of the @@ -1873,9 +1874,10 @@ union bpf_attr { * *ctx* is either **struct xdp_md** for XDP programs or * **struct sk_buff** tc cls_act programs. * Return - * Egress device index on success, 0 if packet needs to continue - * up the stack for further processing or a negative error in case - * of failure. + * * < 0 if any input argument is invalid + * * 0 on success (packet is forwarded, nexthop neighbor exists) + * * > 0 one of **BPF_FIB_LKUP_RET_** codes explaining why the + * * packet is not forwarded or needs assist from full stack * * int bpf_sock_hash_update(struct bpf_sock_ops_kern *skops, struct bpf_map *map, void *key, u64 flags) * Description @@ -2612,6 +2614,18 @@ struct bpf_raw_tracepoint_args { #define BPF_FIB_LOOKUP_DIRECT BIT(0) #define BPF_FIB_LOOKUP_OUTPUT BIT(1) +enum { + BPF_FIB_LKUP_RET_SUCCESS, /* lookup successful */ + BPF_FIB_LKUP_RET_BLACKHOLE, /* dest is blackholed; can be dropped */ + BPF_FIB_LKUP_RET_UNREACHABLE, /* dest is unreachable; can be dropped */ + BPF_FIB_LKUP_RET_PROHIBIT, /* dest not allowed; can be dropped */ + BPF_FIB_LKUP_RET_NOT_FWDED, /* packet is not forwarded */ + BPF_FIB_LKUP_RET_FWD_DISABLED, /* fwding is not enabled on ingress */ + BPF_FIB_LKUP_RET_UNSUPP_LWT, /* fwd requires encapsulation */ + BPF_FIB_LKUP_RET_NO_NEIGH, /* no neighbor entry for nh */ + BPF_FIB_LKUP_RET_FRAG_NEEDED, /* fragmentation required to fwd */ +}; + struct bpf_fib_lookup { /* input: network family for lookup (AF_INET, AF_INET6) * output: network family of egress nexthop @@ -2625,7 +2639,11 @@ struct bpf_fib_lookup { /* total length of packet from network header - used for MTU check */ __u16 tot_len; - __u32 ifindex; /* L3 device index for lookup */ + + /* input: L3 device index for lookup + * output: device index from FIB lookup + */ + __u32 ifindex; union { /* inputs to lookup */ -- cgit v1.2.3 From 1f27a050fc679d16e68a40e0bb575364a89fad66 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Mon, 30 Jul 2018 12:26:54 -0300 Subject: tools arch: Update arch/x86/lib/memcpy_64.S copy used in 'perf bench mem memcpy' MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit To cope with the changes in: 12c89130a56a ("x86/asm/memcpy_mcsafe: Add write-protection-fault handling") 60622d68227d ("x86/asm/memcpy_mcsafe: Return bytes remaining") bd131544aa7e ("x86/asm/memcpy_mcsafe: Add labels for __memcpy_mcsafe() write fault handling") da7bc9c57eb0 ("x86/asm/memcpy_mcsafe: Remove loop unrolling") This needed introducing a file with a copy of the mcsafe_handle_tail() function, that is used in the new memcpy_64.S file, as well as a dummy mcsafe_test.h header. Testing it: $ nm ~/bin/perf | grep mcsafe 0000000000484130 T mcsafe_handle_tail 0000000000484300 T __memcpy_mcsafe $ $ perf bench mem memcpy # Running 'mem/memcpy' benchmark: # function 'default' (Default memcpy() provided by glibc) # Copying 1MB bytes ... 44.389205 GB/sec # function 'x86-64-unrolled' (unrolled memcpy() in arch/x86/lib/memcpy_64.S) # Copying 1MB bytes ... 22.710756 GB/sec # function 'x86-64-movsq' (movsq-based memcpy() in arch/x86/lib/memcpy_64.S) # Copying 1MB bytes ... 42.459239 GB/sec # function 'x86-64-movsb' (movsb-based memcpy() in arch/x86/lib/memcpy_64.S) # Copying 1MB bytes ... 42.459239 GB/sec $ This silences this perf tools build warning: Warning: Kernel ABI header at 'tools/arch/x86/lib/memcpy_64.S' differs from latest version at 'arch/x86/lib/memcpy_64.S' Cc: Adrian Hunter Cc: Dan Williams Cc: David Ahern Cc: Jiri Olsa Cc: Mika Penttilä Cc: Namhyung Kim Cc: Tony Luck Cc: Wang Nan Link: https://lkml.kernel.org/n/tip-igdpciheradk3gb3qqal52d0@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/arch/x86/include/asm/mcsafe_test.h | 13 ++++ tools/arch/x86/lib/memcpy_64.S | 112 +++++++++++++++---------------- tools/perf/bench/Build | 1 + tools/perf/bench/mem-memcpy-x86-64-asm.S | 1 + tools/perf/bench/mem-memcpy-x86-64-lib.c | 24 +++++++ 5 files changed, 93 insertions(+), 58 deletions(-) create mode 100644 tools/arch/x86/include/asm/mcsafe_test.h create mode 100644 tools/perf/bench/mem-memcpy-x86-64-lib.c diff --git a/tools/arch/x86/include/asm/mcsafe_test.h b/tools/arch/x86/include/asm/mcsafe_test.h new file mode 100644 index 000000000000..2ccd588fbad4 --- /dev/null +++ b/tools/arch/x86/include/asm/mcsafe_test.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _MCSAFE_TEST_H_ +#define _MCSAFE_TEST_H_ + +.macro MCSAFE_TEST_CTL +.endm + +.macro MCSAFE_TEST_SRC reg count target +.endm + +.macro MCSAFE_TEST_DST reg count target +.endm +#endif /* _MCSAFE_TEST_H_ */ diff --git a/tools/arch/x86/lib/memcpy_64.S b/tools/arch/x86/lib/memcpy_64.S index 9a53a06e5a3e..298ef1479240 100644 --- a/tools/arch/x86/lib/memcpy_64.S +++ b/tools/arch/x86/lib/memcpy_64.S @@ -3,6 +3,7 @@ #include #include #include +#include #include #include @@ -183,12 +184,15 @@ ENTRY(memcpy_orig) ENDPROC(memcpy_orig) #ifndef CONFIG_UML + +MCSAFE_TEST_CTL + /* - * memcpy_mcsafe_unrolled - memory copy with machine check exception handling + * __memcpy_mcsafe - memory copy with machine check exception handling * Note that we only catch machine checks when reading the source addresses. * Writes to target are posted and don't generate machine checks. */ -ENTRY(memcpy_mcsafe_unrolled) +ENTRY(__memcpy_mcsafe) cmpl $8, %edx /* Less than 8 bytes? Go to byte copy loop */ jb .L_no_whole_words @@ -204,58 +208,33 @@ ENTRY(memcpy_mcsafe_unrolled) subl $8, %ecx negl %ecx subl %ecx, %edx -.L_copy_leading_bytes: +.L_read_leading_bytes: movb (%rsi), %al + MCSAFE_TEST_SRC %rsi 1 .E_leading_bytes + MCSAFE_TEST_DST %rdi 1 .E_leading_bytes +.L_write_leading_bytes: movb %al, (%rdi) incq %rsi incq %rdi decl %ecx - jnz .L_copy_leading_bytes + jnz .L_read_leading_bytes .L_8byte_aligned: - /* Figure out how many whole cache lines (64-bytes) to copy */ - movl %edx, %ecx - andl $63, %edx - shrl $6, %ecx - jz .L_no_whole_cache_lines - - /* Loop copying whole cache lines */ -.L_cache_w0: movq (%rsi), %r8 -.L_cache_w1: movq 1*8(%rsi), %r9 -.L_cache_w2: movq 2*8(%rsi), %r10 -.L_cache_w3: movq 3*8(%rsi), %r11 - movq %r8, (%rdi) - movq %r9, 1*8(%rdi) - movq %r10, 2*8(%rdi) - movq %r11, 3*8(%rdi) -.L_cache_w4: movq 4*8(%rsi), %r8 -.L_cache_w5: movq 5*8(%rsi), %r9 -.L_cache_w6: movq 6*8(%rsi), %r10 -.L_cache_w7: movq 7*8(%rsi), %r11 - movq %r8, 4*8(%rdi) - movq %r9, 5*8(%rdi) - movq %r10, 6*8(%rdi) - movq %r11, 7*8(%rdi) - leaq 64(%rsi), %rsi - leaq 64(%rdi), %rdi - decl %ecx - jnz .L_cache_w0 - - /* Are there any trailing 8-byte words? */ -.L_no_whole_cache_lines: movl %edx, %ecx andl $7, %edx shrl $3, %ecx jz .L_no_whole_words - /* Copy trailing words */ -.L_copy_trailing_words: +.L_read_words: movq (%rsi), %r8 - mov %r8, (%rdi) - leaq 8(%rsi), %rsi - leaq 8(%rdi), %rdi + MCSAFE_TEST_SRC %rsi 8 .E_read_words + MCSAFE_TEST_DST %rdi 8 .E_write_words +.L_write_words: + movq %r8, (%rdi) + addq $8, %rsi + addq $8, %rdi decl %ecx - jnz .L_copy_trailing_words + jnz .L_read_words /* Any trailing bytes? */ .L_no_whole_words: @@ -264,38 +243,55 @@ ENTRY(memcpy_mcsafe_unrolled) /* Copy trailing bytes */ movl %edx, %ecx -.L_copy_trailing_bytes: +.L_read_trailing_bytes: movb (%rsi), %al + MCSAFE_TEST_SRC %rsi 1 .E_trailing_bytes + MCSAFE_TEST_DST %rdi 1 .E_trailing_bytes +.L_write_trailing_bytes: movb %al, (%rdi) incq %rsi incq %rdi decl %ecx - jnz .L_copy_trailing_bytes + jnz .L_read_trailing_bytes /* Copy successful. Return zero */ .L_done_memcpy_trap: xorq %rax, %rax ret -ENDPROC(memcpy_mcsafe_unrolled) -EXPORT_SYMBOL_GPL(memcpy_mcsafe_unrolled) +ENDPROC(__memcpy_mcsafe) +EXPORT_SYMBOL_GPL(__memcpy_mcsafe) .section .fixup, "ax" - /* Return -EFAULT for any failure */ -.L_memcpy_mcsafe_fail: - mov $-EFAULT, %rax + /* + * Return number of bytes not copied for any failure. Note that + * there is no "tail" handling since the source buffer is 8-byte + * aligned and poison is cacheline aligned. + */ +.E_read_words: + shll $3, %ecx +.E_leading_bytes: + addl %edx, %ecx +.E_trailing_bytes: + mov %ecx, %eax ret + /* + * For write fault handling, given the destination is unaligned, + * we handle faults on multi-byte writes with a byte-by-byte + * copy up to the write-protected page. + */ +.E_write_words: + shll $3, %ecx + addl %edx, %ecx + movl %ecx, %edx + jmp mcsafe_handle_tail + .previous - _ASM_EXTABLE_FAULT(.L_copy_leading_bytes, .L_memcpy_mcsafe_fail) - _ASM_EXTABLE_FAULT(.L_cache_w0, .L_memcpy_mcsafe_fail) - _ASM_EXTABLE_FAULT(.L_cache_w1, .L_memcpy_mcsafe_fail) - _ASM_EXTABLE_FAULT(.L_cache_w2, .L_memcpy_mcsafe_fail) - _ASM_EXTABLE_FAULT(.L_cache_w3, .L_memcpy_mcsafe_fail) - _ASM_EXTABLE_FAULT(.L_cache_w4, .L_memcpy_mcsafe_fail) - _ASM_EXTABLE_FAULT(.L_cache_w5, .L_memcpy_mcsafe_fail) - _ASM_EXTABLE_FAULT(.L_cache_w6, .L_memcpy_mcsafe_fail) - _ASM_EXTABLE_FAULT(.L_cache_w7, .L_memcpy_mcsafe_fail) - _ASM_EXTABLE_FAULT(.L_copy_trailing_words, .L_memcpy_mcsafe_fail) - _ASM_EXTABLE_FAULT(.L_copy_trailing_bytes, .L_memcpy_mcsafe_fail) + _ASM_EXTABLE_FAULT(.L_read_leading_bytes, .E_leading_bytes) + _ASM_EXTABLE_FAULT(.L_read_words, .E_read_words) + _ASM_EXTABLE_FAULT(.L_read_trailing_bytes, .E_trailing_bytes) + _ASM_EXTABLE(.L_write_leading_bytes, .E_leading_bytes) + _ASM_EXTABLE(.L_write_words, .E_write_words) + _ASM_EXTABLE(.L_write_trailing_bytes, .E_trailing_bytes) #endif diff --git a/tools/perf/bench/Build b/tools/perf/bench/Build index 60bf11943047..eafce1a130a1 100644 --- a/tools/perf/bench/Build +++ b/tools/perf/bench/Build @@ -7,6 +7,7 @@ perf-y += futex-wake-parallel.o perf-y += futex-requeue.o perf-y += futex-lock-pi.o +perf-$(CONFIG_X86_64) += mem-memcpy-x86-64-lib.o perf-$(CONFIG_X86_64) += mem-memcpy-x86-64-asm.o perf-$(CONFIG_X86_64) += mem-memset-x86-64-asm.o diff --git a/tools/perf/bench/mem-memcpy-x86-64-asm.S b/tools/perf/bench/mem-memcpy-x86-64-asm.S index b43f8d2a34ec..9ad015a1e202 100644 --- a/tools/perf/bench/mem-memcpy-x86-64-asm.S +++ b/tools/perf/bench/mem-memcpy-x86-64-asm.S @@ -6,6 +6,7 @@ #define altinstr_replacement text #define globl p2align 4; .globl #define _ASM_EXTABLE_FAULT(x, y) +#define _ASM_EXTABLE(x, y) #include "../../arch/x86/lib/memcpy_64.S" /* diff --git a/tools/perf/bench/mem-memcpy-x86-64-lib.c b/tools/perf/bench/mem-memcpy-x86-64-lib.c new file mode 100644 index 000000000000..4130734dde84 --- /dev/null +++ b/tools/perf/bench/mem-memcpy-x86-64-lib.c @@ -0,0 +1,24 @@ +/* + * From code in arch/x86/lib/usercopy_64.c, copied to keep tools/ copy + * of the kernel's arch/x86/lib/memcpy_64.s used in 'perf bench mem memcpy' + * happy. + */ +#include + +unsigned long __memcpy_mcsafe(void *dst, const void *src, size_t cnt); +unsigned long mcsafe_handle_tail(char *to, char *from, unsigned len); + +unsigned long mcsafe_handle_tail(char *to, char *from, unsigned len) +{ + for (; len; --len, to++, from++) { + /* + * Call the assembly routine back directly since + * memcpy_mcsafe() may silently fallback to memcpy. + */ + unsigned long rem = __memcpy_mcsafe(to, from, 1); + + if (rem) + break; + } + return len; +} -- cgit v1.2.3 From 44fe619b1418ff4e9d2f9518a940fbe2fb686a08 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Mon, 30 Jul 2018 13:15:03 -0300 Subject: perf tools: Fix the build on the alpine:edge distro The UAPI file byteorder/little_endian.h uses the __always_inline define without including the header where it is defined, linux/stddef.h, this ends up working in all the other distros because that file gets included seemingly by luck from one of the files included from little_endian.h. But not on Alpine:edge, that fails for all files where perf_event.h is included but linux/stddef.h isn't include before that. Adding the missing linux/stddef.h file where it breaks on Alpine:edge to fix that, in all other distros, that is just a very small header anyway. Cc: Adrian Hunter Cc: David Ahern Cc: Jiri Olsa Cc: Namhyung Kim Cc: Wang Nan Link: https://lkml.kernel.org/n/tip-9r1pifftxvuxms8l7ir73p5l@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/arch/x86/util/pmu.c | 1 + tools/perf/arch/x86/util/tsc.c | 1 + tools/perf/perf.h | 1 + tools/perf/util/header.h | 1 + tools/perf/util/namespaces.h | 1 + 5 files changed, 5 insertions(+) diff --git a/tools/perf/arch/x86/util/pmu.c b/tools/perf/arch/x86/util/pmu.c index 63a74c32ddc5..e33ef5bc31c5 100644 --- a/tools/perf/arch/x86/util/pmu.c +++ b/tools/perf/arch/x86/util/pmu.c @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 #include +#include #include #include "../../util/intel-pt.h" diff --git a/tools/perf/arch/x86/util/tsc.c b/tools/perf/arch/x86/util/tsc.c index 06bae7023a51..950539f9a4f7 100644 --- a/tools/perf/arch/x86/util/tsc.c +++ b/tools/perf/arch/x86/util/tsc.c @@ -2,6 +2,7 @@ #include #include +#include #include #include "../../perf.h" diff --git a/tools/perf/perf.h b/tools/perf/perf.h index a1a97956136f..d215714f48df 100644 --- a/tools/perf/perf.h +++ b/tools/perf/perf.h @@ -5,6 +5,7 @@ #include #include #include +#include #include extern bool test_attr__enabled; diff --git a/tools/perf/util/header.h b/tools/perf/util/header.h index 90d4577a92dc..6d7fe44aadc0 100644 --- a/tools/perf/util/header.h +++ b/tools/perf/util/header.h @@ -2,6 +2,7 @@ #ifndef __PERF_HEADER_H #define __PERF_HEADER_H +#include #include #include #include diff --git a/tools/perf/util/namespaces.h b/tools/perf/util/namespaces.h index 760558dcfd18..cae1a9a39722 100644 --- a/tools/perf/util/namespaces.h +++ b/tools/perf/util/namespaces.h @@ -10,6 +10,7 @@ #define __PERF_NAMESPACES_H #include +#include #include #include #include -- cgit v1.2.3 From 822fb18a82abaf4ee7058793d95d340f5dab7bfc Mon Sep 17 00:00:00 2001 From: Xiao Liang Date: Fri, 27 Jul 2018 17:56:08 +0800 Subject: xen-netfront: wait xenbus state change when load module manually When loading module manually, after call xenbus_switch_state to initializes the state of the netfront device, the driver state did not change so fast that may lead no dev created in latest kernel. This patch adds wait to make sure xenbus knows the driver is not in closed/unknown state. Current state: [vm]# ethtool eth0 Settings for eth0: Link detected: yes [vm]# modprobe -r xen_netfront [vm]# modprobe xen_netfront [vm]# ethtool eth0 Settings for eth0: Cannot get device settings: No such device Cannot get wake-on-lan settings: No such device Cannot get message level: No such device Cannot get link status: No such device No data available With the patch installed. [vm]# ethtool eth0 Settings for eth0: Link detected: yes [vm]# modprobe -r xen_netfront [vm]# modprobe xen_netfront [vm]# ethtool eth0 Settings for eth0: Link detected: yes Signed-off-by: Xiao Liang Signed-off-by: David S. Miller --- drivers/net/xen-netfront.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c index a57daecf1d57..2d8812dd1534 100644 --- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -87,6 +87,7 @@ struct netfront_cb { /* IRQ name is queue name with "-tx" or "-rx" appended */ #define IRQ_NAME_SIZE (QUEUE_NAME_SIZE + 3) +static DECLARE_WAIT_QUEUE_HEAD(module_load_q); static DECLARE_WAIT_QUEUE_HEAD(module_unload_q); struct netfront_stats { @@ -1330,6 +1331,11 @@ static struct net_device *xennet_create_dev(struct xenbus_device *dev) netif_carrier_off(netdev); xenbus_switch_state(dev, XenbusStateInitialising); + wait_event(module_load_q, + xenbus_read_driver_state(dev->otherend) != + XenbusStateClosed && + xenbus_read_driver_state(dev->otherend) != + XenbusStateUnknown); return netdev; exit: -- cgit v1.2.3 From df18b50448fab1dff093731dfd0e25e77e1afcd1 Mon Sep 17 00:00:00 2001 From: Sabrina Dubroca Date: Mon, 30 Jul 2018 16:23:10 +0200 Subject: net/ipv6: fix metrics leak Since commit d4ead6b34b67 ("net/ipv6: move metrics from dst to rt6_info"), ipv6 metrics are shared and refcounted. rt6_set_from() assigns the rt->from pointer and increases the refcount on from's metrics. This reference is never released. Introduce the fib6_metrics_release() helper and use it to release the metrics. Fixes: d4ead6b34b67 ("net/ipv6: move metrics from dst to rt6_info") Signed-off-by: Sabrina Dubroca Signed-off-by: David S. Miller --- net/ipv6/ip6_fib.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/net/ipv6/ip6_fib.c b/net/ipv6/ip6_fib.c index d212738e9d10..211a2d437b56 100644 --- a/net/ipv6/ip6_fib.c +++ b/net/ipv6/ip6_fib.c @@ -167,11 +167,22 @@ struct fib6_info *fib6_info_alloc(gfp_t gfp_flags) return f6i; } +static void fib6_metrics_release(struct fib6_info *f6i) +{ + struct dst_metrics *m; + + if (!f6i) + return; + + m = f6i->fib6_metrics; + if (m != &dst_default_metrics && refcount_dec_and_test(&m->refcnt)) + kfree(m); +} + void fib6_info_destroy_rcu(struct rcu_head *head) { struct fib6_info *f6i = container_of(head, struct fib6_info, rcu); struct rt6_exception_bucket *bucket; - struct dst_metrics *m; WARN_ON(f6i->fib6_node); @@ -201,9 +212,7 @@ void fib6_info_destroy_rcu(struct rcu_head *head) if (f6i->fib6_nh.nh_dev) dev_put(f6i->fib6_nh.nh_dev); - m = f6i->fib6_metrics; - if (m != &dst_default_metrics && refcount_dec_and_test(&m->refcnt)) - kfree(m); + fib6_metrics_release(f6i); kfree(f6i); } @@ -887,6 +896,7 @@ static void fib6_drop_pcpu_from(struct fib6_info *f6i, from = rcu_dereference_protected(pcpu_rt->from, lockdep_is_held(&table->tb6_lock)); + fib6_metrics_release(from); rcu_assign_pointer(pcpu_rt->from, NULL); fib6_info_release(from); } -- cgit v1.2.3 From 386177da9e601ed176d54c04324d9ebf44c70620 Mon Sep 17 00:00:00 2001 From: Eugeniy Paltsev Date: Thu, 26 Jul 2018 16:15:44 +0300 Subject: ARC: add SMP_CACHE_BYTES value validate Check that SMP_CACHE_BYTES (and hence ARCH_DMA_MINALIGN) is larger or equal to any cache line length by comparing it with values previously read from ARC cache BCR registers. Signed-off-by: Eugeniy Paltsev Signed-off-by: Vineet Gupta --- arch/arc/mm/cache.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c index 9dbe645ee127..b95365e1253a 100644 --- a/arch/arc/mm/cache.c +++ b/arch/arc/mm/cache.c @@ -1246,6 +1246,16 @@ void __init arc_cache_init_master(void) } } + /* + * Check that SMP_CACHE_BYTES (and hence ARCH_DMA_MINALIGN) is larger + * or equal to any cache line length. + */ + BUILD_BUG_ON_MSG(L1_CACHE_BYTES > SMP_CACHE_BYTES, + "SMP_CACHE_BYTES must be >= any cache line length"); + if (is_isa_arcv2() && (l2_line_sz > SMP_CACHE_BYTES)) + panic("L2 Cache line [%d] > kernel Config [%d]\n", + l2_line_sz, SMP_CACHE_BYTES); + /* Note that SLC disable not formally supported till HS 3.0 */ if (is_isa_arcv2() && l2_line_sz && !slc_enable) arc_slc_disable(); -- cgit v1.2.3 From 05b466bf846d2e8d2f0baf8dfd81a42cc933e237 Mon Sep 17 00:00:00 2001 From: Ofer Levi Date: Sat, 28 Jul 2018 10:54:41 +0300 Subject: ARC: [plat-eznps] Add missing struct nps_host_reg_aux_dpc Fixing compilation issue caused by missing struct nps_host_reg_aux_dpc definition. Fixes: 3f9cd874dcc87 ("ARC: [plat-eznps] avoid toggling of DPC register") Reported-by: Randy Dunlap Signed-off-by: Ofer Levi Signed-off-by: Vineet Gupta --- arch/arc/plat-eznps/include/plat/ctop.h | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arc/plat-eznps/include/plat/ctop.h b/arch/arc/plat-eznps/include/plat/ctop.h index 0c7d11022d0f..bd34b96bc591 100644 --- a/arch/arc/plat-eznps/include/plat/ctop.h +++ b/arch/arc/plat-eznps/include/plat/ctop.h @@ -143,6 +143,15 @@ struct nps_host_reg_gim_p_int_dst { }; /* AUX registers definition */ +struct nps_host_reg_aux_dpc { + union { + struct { + u32 ien:1, men:1, hen:1, reserved:29; + }; + u32 value; + }; +}; + struct nps_host_reg_aux_udmc { union { struct { -- cgit v1.2.3 From b1f32ce1c3d2c11959b7e6a2c58dc5197c581966 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 29 Jul 2018 11:10:51 -0700 Subject: arc: [plat-eznps] fix data type errors in platform headers Add to fix build errors. Both ctop.h and use u32 types and cause many errors. Examples: ../include/soc/nps/common.h:71:4: error: unknown type name 'u32' u32 __reserved:20, cluster:4, core:4, thread:4; ../include/soc/nps/common.h:76:3: error: unknown type name 'u32' u32 value; ../include/soc/nps/common.h:124:4: error: unknown type name 'u32' u32 base:8, cl_x:4, cl_y:4, ../include/soc/nps/common.h:127:3: error: unknown type name 'u32' u32 value; ../arch/arc/plat-eznps/include/plat/ctop.h:83:4: error: unknown type name 'u32' u32 gen:1, gdis:1, clk_gate_dis:1, asb:1, ../arch/arc/plat-eznps/include/plat/ctop.h:86:3: error: unknown type name 'u32' u32 value; ../arch/arc/plat-eznps/include/plat/ctop.h:93:4: error: unknown type name 'u32' u32 csa:22, dmsid:6, __reserved:3, cs:1; ../arch/arc/plat-eznps/include/plat/ctop.h:95:3: error: unknown type name 'u32' u32 value; Cc: linux-snps-arc@lists.infradead.org Cc: Ofer Levi Reviewed-by: Leon Romanovsky Signed-off-by: Randy Dunlap Signed-off-by: Vineet Gupta --- arch/arc/plat-eznps/include/plat/ctop.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arc/plat-eznps/include/plat/ctop.h b/arch/arc/plat-eznps/include/plat/ctop.h index bd34b96bc591..4f6a1673b3a6 100644 --- a/arch/arc/plat-eznps/include/plat/ctop.h +++ b/arch/arc/plat-eznps/include/plat/ctop.h @@ -21,6 +21,7 @@ #error "Incorrect ctop.h include" #endif +#include #include /* core auxiliary registers */ -- cgit v1.2.3 From 9e2ea405543d9ddfe05b351f1679e53bd9c11f80 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 26 Jul 2018 20:16:35 -0700 Subject: arc: [plat-eznps] fix printk warning in arc/plat-eznps/mtm.c Fix printk format warning in arch/arc/plat-eznps/mtm.c: In file included from ../include/linux/printk.h:7, from ../include/linux/kernel.h:14, from ../include/linux/list.h:9, from ../include/linux/smp.h:12, from ../arch/arc/plat-eznps/mtm.c:17: ../arch/arc/plat-eznps/mtm.c: In function 'set_mtm_hs_ctr': ../include/linux/kern_levels.h:5:18: warning: format '%d' expects argument of type 'int', but argument 2 has type 'long int' [-Wformat=] #define KERN_SOH "\001" /* ASCII Start Of Header */ ^~~~~~ ../include/linux/kern_levels.h:11:18: note: in expansion of macro 'KERN_SOH' #define KERN_ERR KERN_SOH "3" /* error conditions */ ^~~~~~~~ ../include/linux/printk.h:308:9: note: in expansion of macro 'KERN_ERR' printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__) ^~~~~~~~ ../arch/arc/plat-eznps/mtm.c:166:3: note: in expansion of macro 'pr_err' pr_err("** Invalid @nps_mtm_hs_ctr [%d] needs to be [%d:%d] (incl)\n", ^~~~~~ ../arch/arc/plat-eznps/mtm.c:166:40: note: format string is defined here pr_err("** Invalid @nps_mtm_hs_ctr [%d] needs to be [%d:%d] (incl)\n", ~^ %ld The hs_ctr variable can just be int instead of long, so also change kstrtol() to kstrtoint() and leave the format string as %d. Also add 2 header files since they are used in mtm.c and we prefer not to depend on accidental/indirect #includes. Cc: linux-snps-arc@lists.infradead.org Cc: Ofer Levi Reviewed-by: Leon Romanovsky Signed-off-by: Randy Dunlap Signed-off-by: Vineet Gupta --- arch/arc/plat-eznps/mtm.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/arc/plat-eznps/mtm.c b/arch/arc/plat-eznps/mtm.c index 2388de3d09ef..ed0077ef666e 100644 --- a/arch/arc/plat-eznps/mtm.c +++ b/arch/arc/plat-eznps/mtm.c @@ -15,6 +15,8 @@ */ #include +#include +#include #include #include #include @@ -157,10 +159,10 @@ void mtm_enable_core(unsigned int cpu) /* Verify and set the value of the mtm hs counter */ static int __init set_mtm_hs_ctr(char *ctr_str) { - long hs_ctr; + int hs_ctr; int ret; - ret = kstrtol(ctr_str, 0, &hs_ctr); + ret = kstrtoint(ctr_str, 0, &hs_ctr); if (ret || hs_ctr > MT_HS_CNT_MAX || hs_ctr < MT_HS_CNT_MIN) { pr_err("** Invalid @nps_mtm_hs_ctr [%d] needs to be [%d:%d] (incl)\n", -- cgit v1.2.3 From 2423665ec53f2a29191b35382075e9834288a975 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 26 Jul 2018 20:16:35 -0700 Subject: arc: fix build errors in arc/include/asm/delay.h Fix build errors in arch/arc/'s delay.h: - add "extern unsigned long loops_per_jiffy;" - add for "u64" In file included from ../drivers/infiniband/hw/cxgb3/cxio_hal.c:32: ../arch/arc/include/asm/delay.h: In function '__udelay': ../arch/arc/include/asm/delay.h:61:12: error: 'u64' undeclared (first use in this function) loops = ((u64) usecs * 4295 * HZ * loops_per_jiffy) >> 32; ^~~ In file included from ../drivers/infiniband/hw/cxgb3/cxio_hal.c:32: ../arch/arc/include/asm/delay.h: In function '__udelay': ../arch/arc/include/asm/delay.h:63:37: error: 'loops_per_jiffy' undeclared (first use in this function) loops = ((u64) usecs * 4295 * HZ * loops_per_jiffy) >> 32; ^~~~~~~~~~~~~~~ Signed-off-by: Randy Dunlap Cc: Vineet Gupta Cc: linux-snps-arc@lists.infradead.org Cc: Elad Kanfi Cc: Leon Romanovsky Cc: Ofer Levi Signed-off-by: Vineet Gupta --- arch/arc/include/asm/delay.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arc/include/asm/delay.h b/arch/arc/include/asm/delay.h index d5da2115d78a..03d6bb0f4e13 100644 --- a/arch/arc/include/asm/delay.h +++ b/arch/arc/include/asm/delay.h @@ -17,8 +17,11 @@ #ifndef __ASM_ARC_UDELAY_H #define __ASM_ARC_UDELAY_H +#include #include /* HZ */ +extern unsigned long loops_per_jiffy; + static inline void __delay(unsigned long loops) { __asm__ __volatile__( -- cgit v1.2.3 From ec837d620c750c0d4996a907c8c4f7febe1bbeee Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 26 Jul 2018 20:16:35 -0700 Subject: arc: fix type warnings in arc/mm/cache.c Fix type warnings in arch/arc/mm/cache.c. ../arch/arc/mm/cache.c: In function 'flush_anon_page': ../arch/arc/mm/cache.c:1062:55: warning: passing argument 2 of '__flush_dcache_page' makes integer from pointer without a cast [-Wint-conversion] __flush_dcache_page((phys_addr_t)page_address(page), page_address(page)); ^~~~~~~~~~~~~~~~~~ ../arch/arc/mm/cache.c:1013:59: note: expected 'long unsigned int' but argument is of type 'void *' void __flush_dcache_page(phys_addr_t paddr, unsigned long vaddr) ~~~~~~~~~~~~~~^~~~~ Signed-off-by: Randy Dunlap Cc: Vineet Gupta Cc: linux-snps-arc@lists.infradead.org Cc: Elad Kanfi Cc: Leon Romanovsky Cc: Ofer Levi Signed-off-by: Vineet Gupta --- arch/arc/mm/cache.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c index b95365e1253a..25c631942500 100644 --- a/arch/arc/mm/cache.c +++ b/arch/arc/mm/cache.c @@ -1038,7 +1038,7 @@ void flush_cache_mm(struct mm_struct *mm) void flush_cache_page(struct vm_area_struct *vma, unsigned long u_vaddr, unsigned long pfn) { - unsigned int paddr = pfn << PAGE_SHIFT; + phys_addr_t paddr = pfn << PAGE_SHIFT; u_vaddr &= PAGE_MASK; @@ -1058,8 +1058,9 @@ void flush_anon_page(struct vm_area_struct *vma, struct page *page, unsigned long u_vaddr) { /* TBD: do we really need to clear the kernel mapping */ - __flush_dcache_page(page_address(page), u_vaddr); - __flush_dcache_page(page_address(page), page_address(page)); + __flush_dcache_page((phys_addr_t)page_address(page), u_vaddr); + __flush_dcache_page((phys_addr_t)page_address(page), + (phys_addr_t)page_address(page)); } -- cgit v1.2.3 From 61f4b23769f0cc72ae62c9a81cf08f0397d40da8 Mon Sep 17 00:00:00 2001 From: Dmitry Safonov Date: Mon, 30 Jul 2018 18:32:36 +0100 Subject: netlink: Don't shift with UB on nlk->ngroups On i386 nlk->ngroups might be 32 or 0. Which leads to UB, resulting in hang during boot. Check for 0 ngroups and use (unsigned long long) as a type to shift. Fixes: 7acf9d4237c4 ("netlink: Do not subscribe to non-existent groups"). Reported-by: kernel test robot Signed-off-by: Dmitry Safonov Signed-off-by: David S. Miller --- net/netlink/af_netlink.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index ac805caed2e2..7d860a22e5fb 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -1008,7 +1008,11 @@ static int netlink_bind(struct socket *sock, struct sockaddr *addr, if (err) return err; } - groups &= (1UL << nlk->ngroups) - 1; + + if (nlk->ngroups == 0) + groups = 0; + else + groups &= (1ULL << nlk->ngroups) - 1; bound = nlk->bound; if (bound) { -- cgit v1.2.3 From 6f57ed681ed817a4ec444e83f3aa2ad695d5ef34 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (VMware)" Date: Wed, 6 Jun 2018 10:11:10 -0400 Subject: sparc/time: Add missing __init to init_tick_ops() Code that was added to force gcc not to inline any function that isn't explicitly declared as inline uncovered that init_tick_ops() isn't marked as "__init". It is only called by __init functions and more importantly it too calls an __init function which would require it to be __init as well. Link: http://lkml.kernel.org/r/201806060444.hdHcKOBy%fengguang.wu@intel.com Reported-by: kbuild test robot Signed-off-by: Steven Rostedt (VMware) Signed-off-by: David S. Miller --- arch/sparc/kernel/time_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sparc/kernel/time_64.c b/arch/sparc/kernel/time_64.c index 2ef8cfa9677e..f0eba72aa1ad 100644 --- a/arch/sparc/kernel/time_64.c +++ b/arch/sparc/kernel/time_64.c @@ -814,7 +814,7 @@ static void __init get_tick_patch(void) } } -static void init_tick_ops(struct sparc64_tick_ops *ops) +static void __init init_tick_ops(struct sparc64_tick_ops *ops) { unsigned long freq, quotient, tick; -- cgit v1.2.3 From f0afc6b18d3953fb96f836e4d1483eb9855a36b0 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 24 Jul 2018 13:53:04 +0200 Subject: sparc: move MSI related definitions to where they are used The definitions in arch/sparc/include/asm/msi.h are only used in arch/sparc/mm/srmmu.c, so it makes sense to have them in the C file directly. In addition, having a custom arch/sparc/include/asm/msi.h prevents from using the asm-generic version of this header, which is necessary to be able to include when CONFIG_GENERIC_MSI_IRQ_DOMAIN is enabled. Signed-off-by: Thomas Petazzoni Acked-by: Sam Ravnborg Signed-off-by: David S. Miller --- arch/sparc/include/asm/msi.h | 32 -------------------------------- arch/sparc/mm/srmmu.c | 20 +++++++++++++++++++- 2 files changed, 19 insertions(+), 33 deletions(-) delete mode 100644 arch/sparc/include/asm/msi.h diff --git a/arch/sparc/include/asm/msi.h b/arch/sparc/include/asm/msi.h deleted file mode 100644 index 3c17c1074431..000000000000 --- a/arch/sparc/include/asm/msi.h +++ /dev/null @@ -1,32 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * msi.h: Defines specific to the MBus - Sbus - Interface. - * - * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu) - * Copyright (C) 1996 Eddie C. Dost (ecd@skynet.be) - */ - -#ifndef _SPARC_MSI_H -#define _SPARC_MSI_H - -/* - * Locations of MSI Registers. - */ -#define MSI_MBUS_ARBEN 0xe0001008 /* MBus Arbiter Enable register */ - -/* - * Useful bits in the MSI Registers. - */ -#define MSI_ASYNC_MODE 0x80000000 /* Operate the MSI asynchronously */ - - -static inline void msi_set_sync(void) -{ - __asm__ __volatile__ ("lda [%0] %1, %%g3\n\t" - "andn %%g3, %2, %%g3\n\t" - "sta %%g3, [%0] %1\n\t" : : - "r" (MSI_MBUS_ARBEN), - "i" (ASI_M_CTL), "r" (MSI_ASYNC_MODE) : "g3"); -} - -#endif /* !(_SPARC_MSI_H) */ diff --git a/arch/sparc/mm/srmmu.c b/arch/sparc/mm/srmmu.c index 1d70c3f6d986..be9cb0065179 100644 --- a/arch/sparc/mm/srmmu.c +++ b/arch/sparc/mm/srmmu.c @@ -37,7 +37,6 @@ #include #include #include -#include #include #include @@ -116,6 +115,25 @@ static inline void srmmu_ctxd_set(ctxd_t *ctxp, pgd_t *pgdp) set_pte((pte_t *)ctxp, pte); } +/* + * Locations of MSI Registers. + */ +#define MSI_MBUS_ARBEN 0xe0001008 /* MBus Arbiter Enable register */ + +/* + * Useful bits in the MSI Registers. + */ +#define MSI_ASYNC_MODE 0x80000000 /* Operate the MSI asynchronously */ + +static void msi_set_sync(void) +{ + __asm__ __volatile__ ("lda [%0] %1, %%g3\n\t" + "andn %%g3, %2, %%g3\n\t" + "sta %%g3, [%0] %1\n\t" : : + "r" (MSI_MBUS_ARBEN), + "i" (ASI_M_CTL), "r" (MSI_ASYNC_MODE) : "g3"); +} + void pmd_set(pmd_t *pmdp, pte_t *ptep) { unsigned long ptp; /* Physical address, shifted right by 4 */ -- cgit v1.2.3 From 12be1036c536f849ad6f9bba73cffa708aa965c3 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 24 Jul 2018 13:53:05 +0200 Subject: sparc: use asm-generic version of msi.h This is necessary to be able to include when CONFIG_GENERIC_MSI_IRQ_DOMAIN is enabled. Without this, a build with CONFIG_GENERIC_MSI_IRQ_DOMAIN fails with: In file included from drivers//ata/ahci.c:45:0: >> include/linux/msi.h:226:10: error: unknown type name 'msi_alloc_info_t'; did you mean 'sg_alloc_fn'? msi_alloc_info_t *arg); ^~~~~~~~~~~~~~~~ sg_alloc_fn include/linux/msi.h:230:9: error: unknown type name 'msi_alloc_info_t'; did you mean 'sg_alloc_fn'? msi_alloc_info_t *arg); ^~~~~~~~~~~~~~~~ sg_alloc_fn include/linux/msi.h:239:12: error: unknown type name 'msi_alloc_info_t'; did you mean 'sg_alloc_fn'? msi_alloc_info_t *arg); ^~~~~~~~~~~~~~~~ sg_alloc_fn include/linux/msi.h:240:22: error: unknown type name 'msi_alloc_info_t'; did you mean 'sg_alloc_fn'? void (*msi_finish)(msi_alloc_info_t *arg, int retval); ^~~~~~~~~~~~~~~~ sg_alloc_fn include/linux/msi.h:241:20: error: unknown type name 'msi_alloc_info_t'; did you mean 'sg_alloc_fn'? void (*set_desc)(msi_alloc_info_t *arg, ^~~~~~~~~~~~~~~~ sg_alloc_fn include/linux/msi.h:316:18: error: unknown type name 'msi_alloc_info_t'; did you mean 'sg_alloc_fn'? int nvec, msi_alloc_info_t *args); ^~~~~~~~~~~~~~~~ sg_alloc_fn include/linux/msi.h:318:29: error: unknown type name 'msi_alloc_info_t'; did you mean 'sg_alloc_fn'? int virq, int nvec, msi_alloc_info_t *args); ^~~~~~~~~~~~~~~~ sg_alloc_fn Signed-off-by: Thomas Petazzoni Signed-off-by: David S. Miller --- arch/sparc/include/asm/Kbuild | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/sparc/include/asm/Kbuild b/arch/sparc/include/asm/Kbuild index ac67828da201..410b263ef5c8 100644 --- a/arch/sparc/include/asm/Kbuild +++ b/arch/sparc/include/asm/Kbuild @@ -13,6 +13,7 @@ generic-y += local64.h generic-y += mcs_spinlock.h generic-y += mm-arch-hooks.h generic-y += module.h +generic-y += msi.h generic-y += preempt.h generic-y += rwsem.h generic-y += serial.h -- cgit v1.2.3 From b305f7ed0f4f494ad6f3ef5667501535d5a8fa31 Mon Sep 17 00:00:00 2001 From: Yi Wang Date: Wed, 25 Jul 2018 10:26:19 +0800 Subject: audit: fix potential null dereference 'context->module.name' The variable 'context->module.name' may be null pointer when kmalloc return null, so it's better to check it before using to avoid null dereference. Another one more thing this patch does is using kstrdup instead of (kmalloc + strcpy), and signal a lost record via audit_log_lost. Cc: stable@vger.kernel.org # 4.11 Signed-off-by: Yi Wang Reviewed-by: Jiang Biao Reviewed-by: Richard Guy Briggs Signed-off-by: Paul Moore --- kernel/auditsc.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/kernel/auditsc.c b/kernel/auditsc.c index ceb1c4596c51..80d672a11088 100644 --- a/kernel/auditsc.c +++ b/kernel/auditsc.c @@ -1279,8 +1279,12 @@ static void show_special(struct audit_context *context, int *call_panic) break; case AUDIT_KERN_MODULE: audit_log_format(ab, "name="); - audit_log_untrustedstring(ab, context->module.name); - kfree(context->module.name); + if (context->module.name) { + audit_log_untrustedstring(ab, context->module.name); + kfree(context->module.name); + } else + audit_log_format(ab, "(null)"); + break; } audit_log_end(ab); @@ -2411,8 +2415,9 @@ void __audit_log_kern_module(char *name) { struct audit_context *context = audit_context(); - context->module.name = kmalloc(strlen(name) + 1, GFP_KERNEL); - strcpy(context->module.name, name); + context->module.name = kstrdup(name, GFP_KERNEL); + if (!context->module.name) + audit_log_lost("out of memory in __audit_log_kern_module"); context->type = AUDIT_KERN_MODULE; } -- cgit v1.2.3 From 573b3aa6940661dc50c383213d428c27df78be7c Mon Sep 17 00:00:00 2001 From: Yonghong Song Date: Mon, 30 Jul 2018 08:49:03 -0700 Subject: tools/bpftool: fix a percpu_array map dump problem I hit the following problem when I tried to use bpftool to dump a percpu array. $ sudo ./bpftool map show 61: percpu_array name stub flags 0x0 key 4B value 4B max_entries 1 memlock 4096B ... $ sudo ./bpftool map dump id 61 bpftool: malloc.c:2406: sysmalloc: Assertion `(old_top == initial_top (av) && old_size == 0) || \ ((unsigned long) (old_size) >= MINSIZE && \ prev_inuse (old_top) && \ ((unsigned long) old_end & (pagesize - 1)) == 0)' failed. Aborted Further debugging revealed that this is due to miscommunication between bpftool and kernel. For example, for the above percpu_array with value size of 4B. The map info returned to user space has value size of 4B. In bpftool, the values array for lookup is allocated like: info->value_size * get_possible_cpus() = 4 * get_possible_cpus() In kernel (kernel/bpf/syscall.c), the values array size is rounded up to multiple of 8. round_up(map->value_size, 8) * num_possible_cpus() = 8 * num_possible_cpus() So when kernel copies the values to user buffer, the kernel will overwrite beyond user buffer boundary. This patch fixed the issue by allocating and stepping through percpu map value array properly in bpftool. Fixes: 71bb428fe2c19 ("tools: bpf: add bpftool") Signed-off-by: Yonghong Song Signed-off-by: Daniel Borkmann --- tools/bpf/bpftool/map.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/tools/bpf/bpftool/map.c b/tools/bpf/bpftool/map.c index 097b1a5e046b..f74a8bcbda87 100644 --- a/tools/bpf/bpftool/map.c +++ b/tools/bpf/bpftool/map.c @@ -36,6 +36,7 @@ #include #include #include +#include #include #include #include @@ -90,7 +91,8 @@ static bool map_is_map_of_progs(__u32 type) static void *alloc_value(struct bpf_map_info *info) { if (map_is_per_cpu(info->type)) - return malloc(info->value_size * get_possible_cpus()); + return malloc(round_up(info->value_size, 8) * + get_possible_cpus()); else return malloc(info->value_size); } @@ -161,9 +163,10 @@ static void print_entry_json(struct bpf_map_info *info, unsigned char *key, jsonw_name(json_wtr, "value"); print_hex_data_json(value, info->value_size); } else { - unsigned int i, n; + unsigned int i, n, step; n = get_possible_cpus(); + step = round_up(info->value_size, 8); jsonw_name(json_wtr, "key"); print_hex_data_json(key, info->key_size); @@ -176,7 +179,7 @@ static void print_entry_json(struct bpf_map_info *info, unsigned char *key, jsonw_int_field(json_wtr, "cpu", i); jsonw_name(json_wtr, "value"); - print_hex_data_json(value + i * info->value_size, + print_hex_data_json(value + i * step, info->value_size); jsonw_end_object(json_wtr); @@ -207,9 +210,10 @@ static void print_entry_plain(struct bpf_map_info *info, unsigned char *key, printf("\n"); } else { - unsigned int i, n; + unsigned int i, n, step; n = get_possible_cpus(); + step = round_up(info->value_size, 8); printf("key:\n"); fprint_hex(stdout, key, info->key_size, " "); @@ -217,7 +221,7 @@ static void print_entry_plain(struct bpf_map_info *info, unsigned char *key, for (i = 0; i < n; i++) { printf("value (CPU %02d):%c", i, info->value_size > 16 ? '\n' : ' '); - fprint_hex(stdout, value + i * info->value_size, + fprint_hex(stdout, value + i * step, info->value_size, " "); printf("\n"); } -- cgit v1.2.3 From 2d55d614fcf58187e2937dba11643b9471cd64d7 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Fri, 27 Jul 2018 20:20:08 -0700 Subject: net: xsk: don't return frames via the allocator on error MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit xdp_return_buff() is used when frame has been successfully handled (transmitted) or if an error occurred during delayed processing and there is no way to report it back to xdp_do_redirect(). In case of __xsk_rcv_zc() error is propagated all the way back to the driver, so there is no need to call xdp_return_buff(). Driver will recycle the frame anyway after seeing that error happened. Fixes: 173d3adb6f43 ("xsk: add zero-copy support for Rx") Signed-off-by: Jakub Kicinski Acked-by: Björn Töpel Signed-off-by: Daniel Borkmann --- net/xdp/xsk.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c index 72335c2e8108..4e937cd7c17d 100644 --- a/net/xdp/xsk.c +++ b/net/xdp/xsk.c @@ -84,10 +84,8 @@ static int __xsk_rcv_zc(struct xdp_sock *xs, struct xdp_buff *xdp, u32 len) { int err = xskq_produce_batch_desc(xs->rx, (u64)xdp->handle, len); - if (err) { - xdp_return_buff(xdp); + if (err) xs->rx_dropped++; - } return err; } -- cgit v1.2.3 From d512584780d3e6a7cacb2f482834849453d444a1 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 30 Jul 2018 14:27:15 -0700 Subject: squashfs: more metadata hardening Anatoly reports another squashfs fuzzing issue, where the decompression parameters themselves are in a compressed block. This causes squashfs_read_data() to be called in order to read the decompression options before the decompression stream having been set up, making squashfs go sideways. Reported-by: Anatoly Trosinenko Acked-by: Phillip Lougher Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- fs/squashfs/block.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/squashfs/block.c b/fs/squashfs/block.c index 2751476e6b6e..f098b9f1c396 100644 --- a/fs/squashfs/block.c +++ b/fs/squashfs/block.c @@ -167,6 +167,8 @@ int squashfs_read_data(struct super_block *sb, u64 index, int length, } if (compressed) { + if (!msblk->stream) + goto read_failure; length = squashfs_decompress(msblk, bh, b, offset, length, output); if (length < 0) -- cgit v1.2.3 From 156c8b58ef5cfd97245928c95669fd4cb0f9c388 Mon Sep 17 00:00:00 2001 From: Kan Liang Date: Mon, 30 Jul 2018 08:28:08 -0400 Subject: perf/x86/intel/uncore: Fix hardcoded index of Broadwell extra PCI devices Masayoshi Mizuma reported that a warning message is shown while a CPU is hot-removed on Broadwell servers: WARNING: CPU: 126 PID: 6 at arch/x86/events/intel/uncore.c:988 uncore_pci_remove+0x10b/0x150 Call Trace: pci_device_remove+0x42/0xd0 device_release_driver_internal+0x148/0x220 pci_stop_bus_device+0x76/0xa0 pci_stop_root_bus+0x44/0x60 acpi_pci_root_remove+0x1f/0x80 acpi_bus_trim+0x57/0x90 acpi_bus_trim+0x2e/0x90 acpi_device_hotplug+0x2bc/0x4b0 acpi_hotplug_work_fn+0x1a/0x30 process_one_work+0x174/0x3a0 worker_thread+0x4c/0x3d0 kthread+0xf8/0x130 This bug was introduced by: commit 15a3e845b01c ("perf/x86/intel/uncore: Fix SBOX support for Broadwell CPUs") The index of "QPI Port 2 filter" was hardcode to 2, but this conflicts with the index of "PCU.3" which is "HSWEP_PCI_PCU_3", which equals to 2 as well. To fix the conflict, the hardcoded index needs to be cleaned up: - introduce a new enumerator "BDX_PCI_QPI_PORT2_FILTER" for "QPI Port 2 filter" on Broadwell, - increase UNCORE_EXTRA_PCI_DEV_MAX by one, - clean up the hardcoded index. Debugged-by: Masayoshi Mizuma Suggested-by: Ingo Molnar Reported-by: Masayoshi Mizuma Tested-by: Masayoshi Mizuma Signed-off-by: Kan Liang Cc: Alexander Shishkin Cc: Arnaldo Carvalho de Melo Cc: Jiri Olsa Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Thomas Gleixner Cc: Vince Weaver Cc: msys.mizuma@gmail.com Cc: stable@vger.kernel.org Fixes: 15a3e845b01c ("perf/x86/intel/uncore: Fix SBOX support for Broadwell CPUs") Link: http://lkml.kernel.org/r/1532953688-15008-1-git-send-email-kan.liang@linux.intel.com Signed-off-by: Ingo Molnar --- arch/x86/events/intel/uncore.h | 2 +- arch/x86/events/intel/uncore_snbep.c | 10 +++++++--- 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/arch/x86/events/intel/uncore.h b/arch/x86/events/intel/uncore.h index c9e1e0bef3c3..e17ab885b1e9 100644 --- a/arch/x86/events/intel/uncore.h +++ b/arch/x86/events/intel/uncore.h @@ -28,7 +28,7 @@ #define UNCORE_PCI_DEV_TYPE(data) ((data >> 8) & 0xff) #define UNCORE_PCI_DEV_IDX(data) (data & 0xff) #define UNCORE_EXTRA_PCI_DEV 0xff -#define UNCORE_EXTRA_PCI_DEV_MAX 3 +#define UNCORE_EXTRA_PCI_DEV_MAX 4 #define UNCORE_EVENT_CONSTRAINT(c, n) EVENT_CONSTRAINT(c, n, 0xff) diff --git a/arch/x86/events/intel/uncore_snbep.c b/arch/x86/events/intel/uncore_snbep.c index 87dc0263a2e1..51d7c117e3c7 100644 --- a/arch/x86/events/intel/uncore_snbep.c +++ b/arch/x86/events/intel/uncore_snbep.c @@ -1029,6 +1029,7 @@ void snbep_uncore_cpu_init(void) enum { SNBEP_PCI_QPI_PORT0_FILTER, SNBEP_PCI_QPI_PORT1_FILTER, + BDX_PCI_QPI_PORT2_FILTER, HSWEP_PCI_PCU_3, }; @@ -3286,15 +3287,18 @@ static const struct pci_device_id bdx_uncore_pci_ids[] = { }, { /* QPI Port 0 filter */ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x6f86), - .driver_data = UNCORE_PCI_DEV_DATA(UNCORE_EXTRA_PCI_DEV, 0), + .driver_data = UNCORE_PCI_DEV_DATA(UNCORE_EXTRA_PCI_DEV, + SNBEP_PCI_QPI_PORT0_FILTER), }, { /* QPI Port 1 filter */ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x6f96), - .driver_data = UNCORE_PCI_DEV_DATA(UNCORE_EXTRA_PCI_DEV, 1), + .driver_data = UNCORE_PCI_DEV_DATA(UNCORE_EXTRA_PCI_DEV, + SNBEP_PCI_QPI_PORT1_FILTER), }, { /* QPI Port 2 filter */ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x6f46), - .driver_data = UNCORE_PCI_DEV_DATA(UNCORE_EXTRA_PCI_DEV, 2), + .driver_data = UNCORE_PCI_DEV_DATA(UNCORE_EXTRA_PCI_DEV, + BDX_PCI_QPI_PORT2_FILTER), }, { /* PCU.3 (for Capability registers) */ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x6fc0), -- cgit v1.2.3 From 01e61a42a5d345a4c0205889498f0c9a0fb9ee8c Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Mon, 30 Jul 2018 15:00:29 -0700 Subject: cpufreq: intel_pstate: Limit the scope of HWP dynamic boost platforms Dynamic boosting of HWP performance on IO wake showed significant improvement to IO workloads. This series was intended for Skylake Xeon platforms only and feature was enabled by default based on CPU model number. But some Xeon platforms reused the Skylake desktop CPU model number. This caused some undesirable side effects to some graphics workloads. Since they are heavily IO bound, the increase in CPU performance decreased the power available for GPU to do its computing and hence decrease in graphics benchmark performance. For example on a Skylake desktop, GpuTest benchmark showed average FPS reduction from 529 to 506. This change makes sure that HWP boost feature is only enabled for Skylake server platforms by using ACPI FADT preferred PM Profile. If some desktop users wants to get benefit of boost, they can still enable boost from intel_pstate sysfs attribute "hwp_dynamic_boost". Fixes: 41ab43c9c89e (cpufreq: intel_pstate: enable boost for Skylake Xeon) Link: https://bugs.freedesktop.org/show_bug.cgi?id=107410 Reported-by: Eero Tamminen Signed-off-by: Srinivas Pandruvada Reviewed-by: Francisco Jerez Acked-by: Mel Gorman Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/intel_pstate.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 3c3971256130..d4ed0022b0dd 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -311,12 +311,20 @@ static DEFINE_MUTEX(intel_pstate_limits_lock); #ifdef CONFIG_ACPI -static bool intel_pstate_get_ppc_enable_status(void) +static bool intel_pstate_acpi_pm_profile_server(void) { if (acpi_gbl_FADT.preferred_profile == PM_ENTERPRISE_SERVER || acpi_gbl_FADT.preferred_profile == PM_PERFORMANCE_SERVER) return true; + return false; +} + +static bool intel_pstate_get_ppc_enable_status(void) +{ + if (intel_pstate_acpi_pm_profile_server()) + return true; + return acpi_ppc; } @@ -459,6 +467,11 @@ static inline void intel_pstate_init_acpi_perf_limits(struct cpufreq_policy *pol static inline void intel_pstate_exit_perf_limits(struct cpufreq_policy *policy) { } + +static inline bool intel_pstate_acpi_pm_profile_server(void) +{ + return false; +} #endif static inline void update_turbo_state(void) @@ -1841,7 +1854,7 @@ static int intel_pstate_init_cpu(unsigned int cpunum) intel_pstate_hwp_enable(cpu); id = x86_match_cpu(intel_pstate_hwp_boost_ids); - if (id) + if (id && intel_pstate_acpi_pm_profile_server()) hwp_boost = true; } -- cgit v1.2.3 From c7513c2a2714204d3588ecaa170ae628fd0d217e Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Fri, 27 Jul 2018 14:59:15 +0200 Subject: crypto/arm64: aes-ce-gcm - add missing kernel_neon_begin/end pair Calling pmull_gcm_encrypt_block() requires kernel_neon_begin() and kernel_neon_end() to be used since the routine touches the NEON register file. Add the missing calls. Also, since NEON register contents are not preserved outside of a kernel mode NEON region, pass the key schedule array again. Fixes: 7c50136a8aba ("crypto: arm64/aes-ghash - yield NEON after every ...") Acked-by: Herbert Xu Signed-off-by: Ard Biesheuvel Signed-off-by: Will Deacon --- arch/arm64/crypto/ghash-ce-glue.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/arm64/crypto/ghash-ce-glue.c b/arch/arm64/crypto/ghash-ce-glue.c index 7cf0b1aa6ea8..8a10f1d7199a 100644 --- a/arch/arm64/crypto/ghash-ce-glue.c +++ b/arch/arm64/crypto/ghash-ce-glue.c @@ -488,9 +488,13 @@ static int gcm_decrypt(struct aead_request *req) err = skcipher_walk_done(&walk, walk.nbytes % AES_BLOCK_SIZE); } - if (walk.nbytes) - pmull_gcm_encrypt_block(iv, iv, NULL, + if (walk.nbytes) { + kernel_neon_begin(); + pmull_gcm_encrypt_block(iv, iv, ctx->aes_key.key_enc, num_rounds(&ctx->aes_key)); + kernel_neon_end(); + } + } else { __aes_arm64_encrypt(ctx->aes_key.key_enc, tag, iv, num_rounds(&ctx->aes_key)); -- cgit v1.2.3 From 44bda4b7d26e9fffed6d7152d98a2e9edaeb2a76 Mon Sep 17 00:00:00 2001 From: Hari Vyas Date: Tue, 3 Jul 2018 14:35:41 +0530 Subject: PCI: Fix is_added/is_busmaster race condition When a PCI device is detected, pdev->is_added is set to 1 and proc and sysfs entries are created. When the device is removed, pdev->is_added is checked for one and then device is detached with clearing of proc and sys entries and at end, pdev->is_added is set to 0. is_added and is_busmaster are bit fields in pci_dev structure sharing same memory location. A strange issue was observed with multiple removal and rescan of a PCIe NVMe device using sysfs commands where is_added flag was observed as zero instead of one while removing device and proc,sys entries are not cleared. This causes issue in later device addition with warning message "proc_dir_entry" already registered. Debugging revealed a race condition between the PCI core setting the is_added bit in pci_bus_add_device() and the NVMe driver reset work-queue setting the is_busmaster bit in pci_set_master(). As these fields are not handled atomically, that clears the is_added bit. Move the is_added bit to a separate private flag variable and use atomic functions to set and retrieve the device addition state. This avoids the race because is_added no longer shares a memory location with is_busmaster. Link: https://bugzilla.kernel.org/show_bug.cgi?id=200283 Signed-off-by: Hari Vyas Signed-off-by: Bjorn Helgaas Reviewed-by: Lukas Wunner Acked-by: Michael Ellerman --- arch/powerpc/kernel/pci-common.c | 4 +++- arch/powerpc/platforms/powernv/pci-ioda.c | 3 ++- arch/powerpc/platforms/pseries/setup.c | 3 ++- drivers/pci/bus.c | 6 +++--- drivers/pci/hotplug/acpiphp_glue.c | 2 +- drivers/pci/pci.h | 11 +++++++++++ drivers/pci/probe.c | 4 ++-- drivers/pci/remove.c | 5 +++-- include/linux/pci.h | 1 - 9 files changed, 27 insertions(+), 12 deletions(-) diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index fe9733ffffaa..471aac313b89 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -42,6 +42,8 @@ #include #include +#include "../../../drivers/pci/pci.h" + /* hose_spinlock protects accesses to the the phb_bitmap. */ static DEFINE_SPINLOCK(hose_spinlock); LIST_HEAD(hose_list); @@ -1014,7 +1016,7 @@ void pcibios_setup_bus_devices(struct pci_bus *bus) /* Cardbus can call us to add new devices to a bus, so ignore * those who are already fully discovered */ - if (dev->is_added) + if (pci_dev_is_added(dev)) continue; pcibios_setup_device(dev); diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c index 5bd0eb6681bc..70b2e1e0f23c 100644 --- a/arch/powerpc/platforms/powernv/pci-ioda.c +++ b/arch/powerpc/platforms/powernv/pci-ioda.c @@ -46,6 +46,7 @@ #include "powernv.h" #include "pci.h" +#include "../../../../drivers/pci/pci.h" #define PNV_IODA1_M64_NUM 16 /* Number of M64 BARs */ #define PNV_IODA1_M64_SEGS 8 /* Segments per M64 BAR */ @@ -3138,7 +3139,7 @@ static void pnv_pci_ioda_fixup_iov_resources(struct pci_dev *pdev) struct pci_dn *pdn; int mul, total_vfs; - if (!pdev->is_physfn || pdev->is_added) + if (!pdev->is_physfn || pci_dev_is_added(pdev)) return; pdn = pci_get_pdn(pdev); diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 139f0af6c3d9..8a4868a3964b 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -71,6 +71,7 @@ #include #include "pseries.h" +#include "../../../../drivers/pci/pci.h" int CMO_PrPSP = -1; int CMO_SecPSP = -1; @@ -664,7 +665,7 @@ static void pseries_pci_fixup_iov_resources(struct pci_dev *pdev) const int *indexes; struct device_node *dn = pci_device_to_OF_node(pdev); - if (!pdev->is_physfn || pdev->is_added) + if (!pdev->is_physfn || pci_dev_is_added(pdev)) return; /*Firmware must support open sriov otherwise dont configure*/ indexes = of_get_property(dn, "ibm,open-sriov-vf-bar-info", NULL); diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c index 35b7fc87eac5..5cb40b2518f9 100644 --- a/drivers/pci/bus.c +++ b/drivers/pci/bus.c @@ -330,7 +330,7 @@ void pci_bus_add_device(struct pci_dev *dev) return; } - dev->is_added = 1; + pci_dev_assign_added(dev, true); } EXPORT_SYMBOL_GPL(pci_bus_add_device); @@ -347,14 +347,14 @@ void pci_bus_add_devices(const struct pci_bus *bus) list_for_each_entry(dev, &bus->devices, bus_list) { /* Skip already-added devices */ - if (dev->is_added) + if (pci_dev_is_added(dev)) continue; pci_bus_add_device(dev); } list_for_each_entry(dev, &bus->devices, bus_list) { /* Skip if device attach failed */ - if (!dev->is_added) + if (!pci_dev_is_added(dev)) continue; child = dev->subordinate; if (child) diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index 3a17b290df5d..ef0b1b6ba86f 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -509,7 +509,7 @@ static void enable_slot(struct acpiphp_slot *slot) list_for_each_entry(dev, &bus->devices, bus_list) { /* Assume that newly added devices are powered on already. */ - if (!dev->is_added) + if (!pci_dev_is_added(dev)) dev->current_state = PCI_D0; } diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 882f1f9596df..08817253c8a2 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -288,6 +288,7 @@ struct pci_sriov { /* pci_dev priv_flags */ #define PCI_DEV_DISCONNECTED 0 +#define PCI_DEV_ADDED 1 static inline int pci_dev_set_disconnected(struct pci_dev *dev, void *unused) { @@ -300,6 +301,16 @@ static inline bool pci_dev_is_disconnected(const struct pci_dev *dev) return test_bit(PCI_DEV_DISCONNECTED, &dev->priv_flags); } +static inline void pci_dev_assign_added(struct pci_dev *dev, bool added) +{ + assign_bit(PCI_DEV_ADDED, &dev->priv_flags, added); +} + +static inline bool pci_dev_is_added(const struct pci_dev *dev) +{ + return test_bit(PCI_DEV_ADDED, &dev->priv_flags); +} + #ifdef CONFIG_PCI_ATS void pci_restore_ats_state(struct pci_dev *dev); #else diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index ac876e32de4b..611adcd9c169 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -2433,13 +2433,13 @@ int pci_scan_slot(struct pci_bus *bus, int devfn) dev = pci_scan_single_device(bus, devfn); if (!dev) return 0; - if (!dev->is_added) + if (!pci_dev_is_added(dev)) nr++; for (fn = next_fn(bus, dev, 0); fn > 0; fn = next_fn(bus, dev, fn)) { dev = pci_scan_single_device(bus, devfn + fn); if (dev) { - if (!dev->is_added) + if (!pci_dev_is_added(dev)) nr++; dev->multifunction = 1; } diff --git a/drivers/pci/remove.c b/drivers/pci/remove.c index 6f072eae4f7a..5e3d0dced2b8 100644 --- a/drivers/pci/remove.c +++ b/drivers/pci/remove.c @@ -19,11 +19,12 @@ static void pci_stop_dev(struct pci_dev *dev) { pci_pme_active(dev, false); - if (dev->is_added) { + if (pci_dev_is_added(dev)) { device_release_driver(&dev->dev); pci_proc_detach_device(dev); pci_remove_sysfs_dev_files(dev); - dev->is_added = 0; + + pci_dev_assign_added(dev, false); } if (dev->bus->self) diff --git a/include/linux/pci.h b/include/linux/pci.h index abd5d5e17aee..c133ccfa002e 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -368,7 +368,6 @@ struct pci_dev { unsigned int transparent:1; /* Subtractive decode bridge */ unsigned int multifunction:1; /* Multi-function device */ - unsigned int is_added:1; unsigned int is_busmaster:1; /* Is busmaster */ unsigned int no_msi:1; /* May not use MSI */ unsigned int no_64bit_msi:1; /* May only use 32-bit MSIs */ -- cgit v1.2.3 From 1877c9fda1b7ba2ee2d9b108b9c9298e69b5b488 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Fri, 27 Jul 2018 13:17:57 +0100 Subject: ASoC: dt-bindings: add dt bindings for wcd9335 audio codec This patch adds bindings for wcd9335 audio codec which can support both SLIMbus and I2S/I2C interface. Signed-off-by: Srinivas Kandagatla Reviewed-by: Vinod Koul Signed-off-by: Mark Brown --- .../devicetree/bindings/sound/qcom,wcd9335.txt | 123 +++++++++++++++++++++ 1 file changed, 123 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/qcom,wcd9335.txt diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt b/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt new file mode 100644 index 000000000000..1d8d49e30af7 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt @@ -0,0 +1,123 @@ +QCOM WCD9335 Codec + +Qualcomm WCD9335 Codec is a standalone Hi-Fi audio codec IC, supports +Qualcomm Technologies, Inc. (QTI) multimedia solutions, including +the MSM8996, MSM8976, and MSM8956 chipsets. It has in-built +Soundwire controller, interrupt mux. It supports both I2S/I2C and +SLIMbus audio interfaces. + +Required properties with SLIMbus Interface: + +- compatible: + Usage: required + Value type: + Definition: For SLIMbus interface it should be "slimMID,PID", + textual representation of Manufacturer ID, Product Code, + shall be in lower case hexadecimal with leading zeroes + suppressed. Refer to slimbus/bus.txt for details. + Should be: + "slim217,1a0" for MSM8996 and APQ8096 SoCs with SLIMbus. + +- reg + Usage: required + Value type: + Definition: Should be ('Device index', 'Instance ID') + +- interrupts + Usage: required + Value type: + Definition: Interrupts via WCD INTR1 and INTR2 pins + +- interrupt-names: + Usage: required + Value type: + Definition: Interrupt names of WCD INTR1 and INTR2 + Should be: "intr1", "intr2" + +- reset-gpio: + Usage: required + Value type: + Definition: Reset gpio line + +- qcom,ifd: + Usage: required + Value type: + Definition: SLIM interface device + +- clocks: + Usage: required + Value type: + Definition: See clock-bindings.txt section "consumers". List of + three clock specifiers for mclk, mclk2 and slimbus clock. + +- clock-names: + Usage: required + Value type: + Definition: Must contain "mclk", "mclk2" and "slimbus" strings. + +- vdd-buck-supply: + Usage: required + Value type: + Definition: Should contain a reference to the 1.8V buck supply + +- vdd-buck-sido-supply: + Usage: required + Value type: + Definition: Should contain a reference to the 1.8V SIDO buck supply + +- vdd-rx-supply: + Usage: required + Value type: + Definition: Should contain a reference to the 1.8V rx supply + +- vdd-tx-supply: + Usage: required + Value type: + Definition: Should contain a reference to the 1.8V tx supply + +- vdd-vbat-supply: + Usage: Optional + Value type: + Definition: Should contain a reference to the vbat supply + +- vdd-micbias-supply: + Usage: required + Value type: + Definition: Should contain a reference to the micbias supply + +- vdd-io-supply: + Usage: required + Value type: + Definition: Should contain a reference to the 1.8V io supply + +- interrupt-controller: + Usage: required + Definition: Indicating that this is a interrupt controller + +- #interrupt-cells: + Usage: required + Value type: + Definition: should be 1 + +#sound-dai-cells + Usage: required + Value type: + Definition: Must be 1 + +codec@1{ + compatible = "slim217,1a0"; + reg = <1 0>; + interrupts = <&msmgpio 54 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "intr2" + reset-gpio = <&msmgpio 64 0>; + qcom,ifd = <&wc9335_ifd>; + clock-names = "mclk", "native"; + clocks = <&rpmcc RPM_SMD_DIV_CLK1>, + <&rpmcc RPM_SMD_BB_CLK1>; + vdd-buck-supply = <&pm8994_s4>; + vdd-rx-supply = <&pm8994_s4>; + vdd-buck-sido-supply = <&pm8994_s4>; + vdd-tx-supply = <&pm8994_s4>; + vdd-io-supply = <&pm8994_s4>; + #sound-dai-cells = <1>; +} -- cgit v1.2.3 From e57d4ca882e289a2ddc844e82fa33ad1453e9871 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Fri, 27 Jul 2018 13:18:00 +0100 Subject: ASoC: wcd9335: add support to wcd9335 codec Qualcomm WCD9335 Codec is a standalone Hi-Fi audio codec IC, It supports both I2S/I2C and SLIMbus audio interfaces. On slimbus interface it supports two data lanes; 16 Tx ports and 8 Rx ports. It has Seven DACs and nine dedicated interpolators, Seven (six audio ADCs, and one VBAT ADC), Multibutton headset control (MBHC), Active noise cancellation and Sidetone paths and processing. This patchset adds very basic support for playback and capture via the 9 interpolators and ADC respectively. Signed-off-by: Srinivas Kandagatla Reviewed-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/codecs/Kconfig | 5 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/wcd9335.c | 1154 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 1161 insertions(+) create mode 100644 sound/soc/codecs/wcd9335.c diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index efb095dbcd71..cb09abf18dde 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -1066,6 +1066,11 @@ config SND_SOC_UDA1380 tristate depends on I2C +config SND_SOC_WCD9335 + tristate "WCD9335 Codec" + depends on MFD_WCD9335 + tristate + config SND_SOC_WL1273 tristate diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 7ae7c85e8219..01410b63daac 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -192,6 +192,7 @@ snd-soc-twl4030-objs := twl4030.o snd-soc-twl6040-objs := twl6040.o snd-soc-uda134x-objs := uda134x.o snd-soc-uda1380-objs := uda1380.o +snd-soc-wcd9335-objs := wcd9335.o snd-soc-wl1273-objs := wl1273.o snd-soc-wm-adsp-objs := wm_adsp.o snd-soc-wm0010-objs := wm0010.o @@ -451,6 +452,7 @@ obj-$(CONFIG_SND_SOC_TWL4030) += snd-soc-twl4030.o obj-$(CONFIG_SND_SOC_TWL6040) += snd-soc-twl6040.o obj-$(CONFIG_SND_SOC_UDA134X) += snd-soc-uda134x.o obj-$(CONFIG_SND_SOC_UDA1380) += snd-soc-uda1380.o +obj-$(CONFIG_SND_SOC_WCD9335) += snd-soc-wcd9335.o obj-$(CONFIG_SND_SOC_WL1273) += snd-soc-wl1273.o obj-$(CONFIG_SND_SOC_WM0010) += snd-soc-wm0010.o obj-$(CONFIG_SND_SOC_WM1250_EV1) += snd-soc-wm1250-ev1.o diff --git a/sound/soc/codecs/wcd9335.c b/sound/soc/codecs/wcd9335.c new file mode 100644 index 000000000000..bd9de5d45fa9 --- /dev/null +++ b/sound/soc/codecs/wcd9335.c @@ -0,0 +1,1154 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2015-2016, The Linux Foundation. All rights reserved. +// Copyright (c) 2017-2018, Linaro Limited + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define WCD9335_RATES_MASK (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |\ + SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_48000 |\ + SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_192000) +/* Fractional Rates */ +#define WCD9335_FRAC_RATES_MASK (SNDRV_PCM_RATE_44100) +#define WCD9335_FORMATS_S16_S24_LE (SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S24_LE) + +/* slave port water mark level + * (0: 6bytes, 1: 9bytes, 2: 12 bytes, 3: 15 bytes) + */ +#define SLAVE_PORT_WATER_MARK_6BYTES 0 +#define SLAVE_PORT_WATER_MARK_9BYTES 1 +#define SLAVE_PORT_WATER_MARK_12BYTES 2 +#define SLAVE_PORT_WATER_MARK_15BYTES 3 +#define SLAVE_PORT_WATER_MARK_SHIFT 1 +#define SLAVE_PORT_ENABLE 1 +#define SLAVE_PORT_DISABLE 0 +#define WCD9335_SLIM_WATER_MARK_VAL \ + ((SLAVE_PORT_WATER_MARK_12BYTES << SLAVE_PORT_WATER_MARK_SHIFT) | \ + (SLAVE_PORT_ENABLE)) + +#define WCD9335_SLIM_NUM_PORT_REG 3 +#define WCD9335_SLIM_PGD_PORT_INT_TX_EN0 (WCD9335_SLIM_PGD_PORT_INT_EN0 + 2) + +#define WCD9335_MCLK_CLK_12P288MHZ 12288000 +#define WCD9335_MCLK_CLK_9P6MHZ 9600000 + +#define WCD9335_SLIM_CLOSE_TIMEOUT 1000 +#define WCD9335_SLIM_IRQ_OVERFLOW (1 << 0) +#define WCD9335_SLIM_IRQ_UNDERFLOW (1 << 1) +#define WCD9335_SLIM_IRQ_PORT_CLOSED (1 << 2) + +#define WCD9335_NUM_INTERPOLATORS 9 +#define WCD9335_RX_START 16 +#define WCD9335_SLIM_CH_START 128 + +#define WCD9335_SLIM_RX_CH(p) \ + {.port = p + WCD9335_RX_START, .shift = p,} + +/* vout step value */ +#define WCD9335_CALCULATE_VOUT_D(req_mv) (((req_mv - 650) * 10) / 25) + +enum { + WCD9335_RX0 = 0, + WCD9335_RX1, + WCD9335_RX2, + WCD9335_RX3, + WCD9335_RX4, + WCD9335_RX5, + WCD9335_RX6, + WCD9335_RX7, + WCD9335_RX8, + WCD9335_RX9, + WCD9335_RX10, + WCD9335_RX11, + WCD9335_RX12, + WCD9335_RX_MAX, +}; + +enum { + SIDO_SOURCE_INTERNAL = 0, + SIDO_SOURCE_RCO_BG, +}; + +enum wcd9335_sido_voltage { + SIDO_VOLTAGE_SVS_MV = 950, + SIDO_VOLTAGE_NOMINAL_MV = 1100, +}; + +enum { + AIF1_PB = 0, + AIF1_CAP, + AIF2_PB, + AIF2_CAP, + AIF3_PB, + AIF3_CAP, + AIF4_PB, + NUM_CODEC_DAIS, +}; + +enum { + INTn_2_INP_SEL_ZERO = 0, + INTn_2_INP_SEL_RX0, + INTn_2_INP_SEL_RX1, + INTn_2_INP_SEL_RX2, + INTn_2_INP_SEL_RX3, + INTn_2_INP_SEL_RX4, + INTn_2_INP_SEL_RX5, + INTn_2_INP_SEL_RX6, + INTn_2_INP_SEL_RX7, + INTn_2_INP_SEL_PROXIMITY, +}; + +enum { + INTn_1_MIX_INP_SEL_ZERO = 0, + INTn_1_MIX_INP_SEL_DEC0, + INTn_1_MIX_INP_SEL_DEC1, + INTn_1_MIX_INP_SEL_IIR0, + INTn_1_MIX_INP_SEL_IIR1, + INTn_1_MIX_INP_SEL_RX0, + INTn_1_MIX_INP_SEL_RX1, + INTn_1_MIX_INP_SEL_RX2, + INTn_1_MIX_INP_SEL_RX3, + INTn_1_MIX_INP_SEL_RX4, + INTn_1_MIX_INP_SEL_RX5, + INTn_1_MIX_INP_SEL_RX6, + INTn_1_MIX_INP_SEL_RX7, + +}; + +enum wcd_clock_type { + WCD_CLK_OFF, + WCD_CLK_RCO, + WCD_CLK_MCLK, +}; + +struct wcd9335_slim_ch { + u32 ch_num; + u16 port; + u16 shift; + struct list_head list; +}; + +struct wcd_slim_codec_dai_data { + struct list_head slim_ch_list; + struct slim_stream_config sconfig; + struct slim_stream_runtime *sruntime; +}; + +struct wcd9335_codec { + struct device *dev; + struct clk *mclk; + struct clk *native_clk; + u32 mclk_rate; + u8 intf_type; + u8 version; + + struct slim_device *slim; + struct slim_device *slim_ifd; + struct regmap *regmap; + struct regmap *if_regmap; + struct regmap_irq_chip_data *irq_data; + + struct wcd9335_slim_ch rx_chs[WCD9335_RX_MAX]; + u32 num_rx_port; + + int sido_input_src; + enum wcd9335_sido_voltage sido_voltage; + + struct wcd_slim_codec_dai_data dai[NUM_CODEC_DAIS]; + struct snd_soc_component *component; + + int master_bias_users; + int clk_mclk_users; + int clk_rco_users; + int sido_ccl_cnt; + enum wcd_clock_type clk_type; + + u32 hph_mode; +}; + +static const struct wcd9335_slim_ch wcd9335_rx_chs[WCD9335_RX_MAX] = { + WCD9335_SLIM_RX_CH(0), /* 16 */ + WCD9335_SLIM_RX_CH(1), /* 17 */ + WCD9335_SLIM_RX_CH(2), + WCD9335_SLIM_RX_CH(3), + WCD9335_SLIM_RX_CH(4), + WCD9335_SLIM_RX_CH(5), + WCD9335_SLIM_RX_CH(6), + WCD9335_SLIM_RX_CH(7), + WCD9335_SLIM_RX_CH(8), + WCD9335_SLIM_RX_CH(9), + WCD9335_SLIM_RX_CH(10), + WCD9335_SLIM_RX_CH(11), + WCD9335_SLIM_RX_CH(12), +}; + +struct interp_sample_rate { + int rate; + int rate_val; +}; + +static struct interp_sample_rate int_mix_rate_val[] = { + {48000, 0x4}, /* 48K */ + {96000, 0x5}, /* 96K */ + {192000, 0x6}, /* 192K */ +}; + +static struct interp_sample_rate int_prim_rate_val[] = { + {8000, 0x0}, /* 8K */ + {16000, 0x1}, /* 16K */ + {24000, -EINVAL},/* 24K */ + {32000, 0x3}, /* 32K */ + {48000, 0x4}, /* 48K */ + {96000, 0x5}, /* 96K */ + {192000, 0x6}, /* 192K */ + {384000, 0x7}, /* 384K */ + {44100, 0x8}, /* 44.1K */ +}; + +struct wcd9335_reg_mask_val { + u16 reg; + u8 mask; + u8 val; +}; + +static const struct wcd9335_reg_mask_val wcd9335_codec_reg_init_val_2_0[] = { + {WCD9335_RCO_CTRL_2, 0x0F, 0x08}, + {WCD9335_RX_BIAS_FLYB_MID_RST, 0xF0, 0x10}, + {WCD9335_FLYBACK_CTRL_1, 0x20, 0x20}, + {WCD9335_HPH_OCP_CTL, 0xFF, 0x5A}, + {WCD9335_HPH_L_TEST, 0x01, 0x01}, + {WCD9335_HPH_R_TEST, 0x01, 0x01}, + {WCD9335_CDC_BOOST0_BOOST_CFG1, 0x3F, 0x12}, + {WCD9335_CDC_BOOST0_BOOST_CFG2, 0x1C, 0x08}, + {WCD9335_CDC_COMPANDER7_CTL7, 0x1E, 0x18}, + {WCD9335_CDC_BOOST1_BOOST_CFG1, 0x3F, 0x12}, + {WCD9335_CDC_BOOST1_BOOST_CFG2, 0x1C, 0x08}, + {WCD9335_CDC_COMPANDER8_CTL7, 0x1E, 0x18}, + {WCD9335_CDC_TX0_TX_PATH_SEC7, 0xFF, 0x45}, + {WCD9335_CDC_RX0_RX_PATH_SEC0, 0xFC, 0xF4}, + {WCD9335_HPH_REFBUFF_LP_CTL, 0x08, 0x08}, + {WCD9335_HPH_REFBUFF_LP_CTL, 0x06, 0x02}, +}; + +static const struct wcd9335_reg_mask_val wcd9335_codec_reg_init_common_val[] = { + /* Rbuckfly/R_EAR(32) */ + {WCD9335_CDC_CLSH_K2_MSB, 0x0F, 0x00}, + {WCD9335_CDC_CLSH_K2_LSB, 0xFF, 0x60}, + {WCD9335_CPE_SS_DMIC_CFG, 0x80, 0x00}, + {WCD9335_CDC_BOOST0_BOOST_CTL, 0x70, 0x50}, + {WCD9335_CDC_BOOST1_BOOST_CTL, 0x70, 0x50}, + {WCD9335_CDC_RX7_RX_PATH_CFG1, 0x08, 0x08}, + {WCD9335_CDC_RX8_RX_PATH_CFG1, 0x08, 0x08}, + {WCD9335_ANA_LO_1_2, 0x3C, 0X3C}, + {WCD9335_DIFF_LO_COM_SWCAP_REFBUF_FREQ, 0x70, 0x00}, + {WCD9335_DIFF_LO_COM_PA_FREQ, 0x70, 0x40}, + {WCD9335_SOC_MAD_AUDIO_CTL_2, 0x03, 0x03}, + {WCD9335_CDC_TOP_TOP_CFG1, 0x02, 0x02}, + {WCD9335_CDC_TOP_TOP_CFG1, 0x01, 0x01}, + {WCD9335_EAR_CMBUFF, 0x08, 0x00}, + {WCD9335_CDC_TX9_SPKR_PROT_PATH_CFG0, 0x01, 0x01}, + {WCD9335_CDC_TX10_SPKR_PROT_PATH_CFG0, 0x01, 0x01}, + {WCD9335_CDC_TX11_SPKR_PROT_PATH_CFG0, 0x01, 0x01}, + {WCD9335_CDC_TX12_SPKR_PROT_PATH_CFG0, 0x01, 0x01}, + {WCD9335_CDC_COMPANDER7_CTL3, 0x80, 0x80}, + {WCD9335_CDC_COMPANDER8_CTL3, 0x80, 0x80}, + {WCD9335_CDC_COMPANDER7_CTL7, 0x01, 0x01}, + {WCD9335_CDC_COMPANDER8_CTL7, 0x01, 0x01}, + {WCD9335_CDC_RX0_RX_PATH_CFG0, 0x01, 0x01}, + {WCD9335_CDC_RX1_RX_PATH_CFG0, 0x01, 0x01}, + {WCD9335_CDC_RX2_RX_PATH_CFG0, 0x01, 0x01}, + {WCD9335_CDC_RX3_RX_PATH_CFG0, 0x01, 0x01}, + {WCD9335_CDC_RX4_RX_PATH_CFG0, 0x01, 0x01}, + {WCD9335_CDC_RX5_RX_PATH_CFG0, 0x01, 0x01}, + {WCD9335_CDC_RX6_RX_PATH_CFG0, 0x01, 0x01}, + {WCD9335_CDC_RX7_RX_PATH_CFG0, 0x01, 0x01}, + {WCD9335_CDC_RX8_RX_PATH_CFG0, 0x01, 0x01}, + {WCD9335_CDC_RX0_RX_PATH_MIX_CFG, 0x01, 0x01}, + {WCD9335_CDC_RX1_RX_PATH_MIX_CFG, 0x01, 0x01}, + {WCD9335_CDC_RX2_RX_PATH_MIX_CFG, 0x01, 0x01}, + {WCD9335_CDC_RX3_RX_PATH_MIX_CFG, 0x01, 0x01}, + {WCD9335_CDC_RX4_RX_PATH_MIX_CFG, 0x01, 0x01}, + {WCD9335_CDC_RX5_RX_PATH_MIX_CFG, 0x01, 0x01}, + {WCD9335_CDC_RX6_RX_PATH_MIX_CFG, 0x01, 0x01}, + {WCD9335_CDC_RX7_RX_PATH_MIX_CFG, 0x01, 0x01}, + {WCD9335_CDC_RX8_RX_PATH_MIX_CFG, 0x01, 0x01}, + {WCD9335_VBADC_IBIAS_FE, 0x0C, 0x08}, +}; + +static int wcd9335_set_mix_interpolator_rate(struct snd_soc_dai *dai, + int rate_val, + u32 rate) +{ + struct snd_soc_component *component = dai->component; + struct wcd9335_codec *wcd = dev_get_drvdata(component->dev); + struct wcd9335_slim_ch *ch; + int val, j; + + list_for_each_entry(ch, &wcd->dai[dai->id].slim_ch_list, list) { + for (j = 0; j < WCD9335_NUM_INTERPOLATORS; j++) { + val = snd_soc_component_read32(component, + WCD9335_CDC_RX_INP_MUX_RX_INT_CFG1(j)) & + WCD9335_CDC_RX_INP_MUX_RX_INT_SEL_MASK; + + if (val == (ch->shift + INTn_2_INP_SEL_RX0)) + snd_soc_component_update_bits(component, + WCD9335_CDC_RX_PATH_MIX_CTL(j), + WCD9335_CDC_MIX_PCM_RATE_MASK, + rate_val); + } + } + + return 0; +} + +static int wcd9335_set_prim_interpolator_rate(struct snd_soc_dai *dai, + u8 rate_val, + u32 rate) +{ + struct snd_soc_component *comp = dai->component; + struct wcd9335_codec *wcd = dev_get_drvdata(comp->dev); + struct wcd9335_slim_ch *ch; + u8 cfg0, cfg1, inp0_sel, inp1_sel, inp2_sel; + int inp, j; + + list_for_each_entry(ch, &wcd->dai[dai->id].slim_ch_list, list) { + inp = ch->shift + INTn_1_MIX_INP_SEL_RX0; + /* + * Loop through all interpolator MUX inputs and find out + * to which interpolator input, the slim rx port + * is connected + */ + for (j = 0; j < WCD9335_NUM_INTERPOLATORS; j++) { + cfg0 = snd_soc_component_read32(comp, + WCD9335_CDC_RX_INP_MUX_RX_INT_CFG0(j)); + cfg1 = snd_soc_component_read32(comp, + WCD9335_CDC_RX_INP_MUX_RX_INT_CFG1(j)); + + inp0_sel = cfg0 & WCD9335_CDC_RX_INP_MUX_RX_INT_SEL_MASK; + inp1_sel = (cfg0 >> 4) & WCD9335_CDC_RX_INP_MUX_RX_INT_SEL_MASK; + inp2_sel = (cfg1 >> 4) & WCD9335_CDC_RX_INP_MUX_RX_INT_SEL_MASK; + + if ((inp0_sel == inp) || (inp1_sel == inp) || + (inp2_sel == inp)) { + /* rate is in Hz */ + if ((j == 0) && (rate == 44100)) + dev_info(wcd->dev, + "Cannot set 44.1KHz on INT0\n"); + else + snd_soc_component_update_bits(comp, + WCD9335_CDC_RX_PATH_CTL(j), + WCD9335_CDC_MIX_PCM_RATE_MASK, + rate_val); + } + } + } + + return 0; +} + +static int wcd9335_set_interpolator_rate(struct snd_soc_dai *dai, u32 rate) +{ + int i; + + /* set mixing path rate */ + for (i = 0; i < ARRAY_SIZE(int_mix_rate_val); i++) { + if (rate == int_mix_rate_val[i].rate) { + wcd9335_set_mix_interpolator_rate(dai, + int_mix_rate_val[i].rate_val, rate); + break; + } + } + + /* set primary path sample rate */ + for (i = 0; i < ARRAY_SIZE(int_prim_rate_val); i++) { + if (rate == int_prim_rate_val[i].rate) { + wcd9335_set_prim_interpolator_rate(dai, + int_prim_rate_val[i].rate_val, rate); + break; + } + } + + return 0; +} + +static int wcd9335_slim_set_hw_params(struct wcd9335_codec *wcd, + struct wcd_slim_codec_dai_data *dai_data, + int direction) +{ + struct list_head *slim_ch_list = &dai_data->slim_ch_list; + struct slim_stream_config *cfg = &dai_data->sconfig; + struct wcd9335_slim_ch *ch; + u16 payload = 0; + int ret, i; + + cfg->ch_count = 0; + cfg->direction = direction; + cfg->port_mask = 0; + + /* Configure slave interface device */ + list_for_each_entry(ch, slim_ch_list, list) { + cfg->ch_count++; + payload |= 1 << ch->shift; + cfg->port_mask |= BIT(ch->port); + } + + cfg->chs = kcalloc(cfg->ch_count, sizeof(unsigned int), GFP_KERNEL); + if (!cfg->chs) + return -ENOMEM; + + i = 0; + list_for_each_entry(ch, slim_ch_list, list) { + cfg->chs[i++] = ch->ch_num; + if (direction == SNDRV_PCM_STREAM_PLAYBACK) { + /* write to interface device */ + ret = regmap_write(wcd->if_regmap, + WCD9335_SLIM_PGD_RX_PORT_MULTI_CHNL_0(ch->port), + payload); + + if (ret < 0) + goto err; + + /* configure the slave port for water mark and enable*/ + ret = regmap_write(wcd->if_regmap, + WCD9335_SLIM_PGD_RX_PORT_CFG(ch->port), + WCD9335_SLIM_WATER_MARK_VAL); + if (ret < 0) + goto err; + } + } + + dai_data->sruntime = slim_stream_allocate(wcd->slim, "WCD9335-SLIM"); + slim_stream_prepare(dai_data->sruntime, cfg); + + return 0; + +err: + dev_err(wcd->dev, "Error Setting slim hw params\n"); + kfree(cfg->chs); + cfg->chs = NULL; + + return ret; +} + +static int wcd9335_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct wcd9335_codec *wcd; + int ret; + + wcd = snd_soc_component_get_drvdata(dai->component); + + switch (substream->stream) { + case SNDRV_PCM_STREAM_PLAYBACK: + ret = wcd9335_set_interpolator_rate(dai, params_rate(params)); + if (ret) { + dev_err(wcd->dev, "cannot set sample rate: %u\n", + params_rate(params)); + return ret; + } + switch (params_width(params)) { + case 16 ... 24: + wcd->dai[dai->id].sconfig.bps = params_width(params); + break; + default: + dev_err(wcd->dev, "%s: Invalid format 0x%x\n", + __func__, params_width(params)); + return -EINVAL; + } + break; + default: + dev_err(wcd->dev, "Invalid stream type %d\n", + substream->stream); + return -EINVAL; + }; + + wcd->dai[dai->id].sconfig.rate = params_rate(params); + wcd9335_slim_set_hw_params(wcd, &wcd->dai[dai->id], substream->stream); + + return 0; +} + +static int wcd9335_prepare(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct wcd_slim_codec_dai_data *dai_data; + struct wcd9335_codec *wcd; + + wcd = snd_soc_component_get_drvdata(dai->component); + dai_data = &wcd->dai[dai->id]; + slim_stream_enable(dai_data->sruntime); + + return 0; +} + +static int wcd9335_set_channel_map(struct snd_soc_dai *dai, + unsigned int tx_num, unsigned int *tx_slot, + unsigned int rx_num, unsigned int *rx_slot) +{ + struct wcd9335_codec *wcd; + int i; + + wcd = snd_soc_component_get_drvdata(dai->component); + + if (!tx_slot || !rx_slot) { + dev_err(wcd->dev, "Invalid tx_slot=%p, rx_slot=%p\n", + tx_slot, rx_slot); + return -EINVAL; + } + + if (wcd->rx_chs) { + wcd->num_rx_port = rx_num; + for (i = 0; i < rx_num; i++) { + wcd->rx_chs[i].ch_num = rx_slot[i]; + INIT_LIST_HEAD(&wcd->rx_chs[i].list); + } + } + + return 0; +} + +static int wcd9335_get_channel_map(struct snd_soc_dai *dai, + unsigned int *tx_num, unsigned int *tx_slot, + unsigned int *rx_num, unsigned int *rx_slot) +{ + struct wcd9335_slim_ch *ch; + struct wcd9335_codec *wcd; + int i = 0; + + wcd = snd_soc_component_get_drvdata(dai->component); + + switch (dai->id) { + case AIF1_PB: + case AIF2_PB: + case AIF3_PB: + case AIF4_PB: + if (!rx_slot || !rx_num) { + dev_err(wcd->dev, "Invalid rx_slot %p or rx_num %p\n", + rx_slot, rx_num); + return -EINVAL; + } + + list_for_each_entry(ch, &wcd->dai[dai->id].slim_ch_list, list) + rx_slot[i++] = ch->ch_num; + + *rx_num = i; + break; + default: + dev_err(wcd->dev, "Invalid DAI ID %x\n", dai->id); + break; + } + + return 0; +} + +static struct snd_soc_dai_ops wcd9335_dai_ops = { + .hw_params = wcd9335_hw_params, + .prepare = wcd9335_prepare, + .set_channel_map = wcd9335_set_channel_map, + .get_channel_map = wcd9335_get_channel_map, +}; + +static struct snd_soc_dai_driver wcd9335_slim_dais[] = { + [0] = { + .name = "wcd9335_rx1", + .id = AIF1_PB, + .playback = { + .stream_name = "AIF1 Playback", + .rates = WCD9335_RATES_MASK | WCD9335_FRAC_RATES_MASK, + .formats = WCD9335_FORMATS_S16_S24_LE, + .rate_max = 192000, + .rate_min = 8000, + .channels_min = 1, + .channels_max = 2, + }, + .ops = &wcd9335_dai_ops, + }, + [1] = { + .name = "wcd9335_tx1", + .id = AIF1_CAP, + .capture = { + .stream_name = "AIF1 Capture", + .rates = WCD9335_RATES_MASK, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + .rate_min = 8000, + .rate_max = 192000, + .channels_min = 1, + .channels_max = 4, + }, + .ops = &wcd9335_dai_ops, + }, + [2] = { + .name = "wcd9335_rx2", + .id = AIF2_PB, + .playback = { + .stream_name = "AIF2 Playback", + .rates = WCD9335_RATES_MASK | WCD9335_FRAC_RATES_MASK, + .formats = WCD9335_FORMATS_S16_S24_LE, + .rate_min = 8000, + .rate_max = 192000, + .channels_min = 1, + .channels_max = 2, + }, + .ops = &wcd9335_dai_ops, + }, + [3] = { + .name = "wcd9335_tx2", + .id = AIF2_CAP, + .capture = { + .stream_name = "AIF2 Capture", + .rates = WCD9335_RATES_MASK, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + .rate_min = 8000, + .rate_max = 192000, + .channels_min = 1, + .channels_max = 4, + }, + .ops = &wcd9335_dai_ops, + }, + [4] = { + .name = "wcd9335_rx3", + .id = AIF3_PB, + .playback = { + .stream_name = "AIF3 Playback", + .rates = WCD9335_RATES_MASK | WCD9335_FRAC_RATES_MASK, + .formats = WCD9335_FORMATS_S16_S24_LE, + .rate_min = 8000, + .rate_max = 192000, + .channels_min = 1, + .channels_max = 2, + }, + .ops = &wcd9335_dai_ops, + }, + [5] = { + .name = "wcd9335_tx3", + .id = AIF3_CAP, + .capture = { + .stream_name = "AIF3 Capture", + .rates = WCD9335_RATES_MASK, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + .rate_min = 8000, + .rate_max = 192000, + .channels_min = 1, + .channels_max = 4, + }, + .ops = &wcd9335_dai_ops, + }, + [6] = { + .name = "wcd9335_rx4", + .id = AIF4_PB, + .playback = { + .stream_name = "AIF4 Playback", + .rates = WCD9335_RATES_MASK | WCD9335_FRAC_RATES_MASK, + .formats = WCD9335_FORMATS_S16_S24_LE, + .rate_min = 8000, + .rate_max = 192000, + .channels_min = 1, + .channels_max = 2, + }, + .ops = &wcd9335_dai_ops, + }, +}; + +static irqreturn_t wcd9335_slimbus_irq(int irq, void *data) +{ + struct wcd9335_codec *wcd = data; + unsigned long status = 0; + int i, j, port_id; + unsigned int val, int_val = 0; + bool tx; + unsigned short reg = 0; + + for (i = WCD9335_SLIM_PGD_PORT_INT_STATUS_RX_0, j = 0; + i <= WCD9335_SLIM_PGD_PORT_INT_STATUS_TX_1; i++, j++) { + regmap_read(wcd->if_regmap, i, &val); + status |= ((u32)val << (8 * j)); + } + + for_each_set_bit(j, &status, 32) { + tx = (j >= 16 ? true : false); + port_id = (tx ? j - 16 : j); + regmap_read(wcd->if_regmap, + WCD9335_SLIM_PGD_PORT_INT_RX_SOURCE0 + j, &val); + if (val) { + if (!tx) + reg = WCD9335_SLIM_PGD_PORT_INT_EN0 + + (port_id / 8); + else + reg = WCD9335_SLIM_PGD_PORT_INT_TX_EN0 + + (port_id / 8); + regmap_read( + wcd->if_regmap, reg, &int_val); + /* + * Ignore interrupts for ports for which the + * interrupts are not specifically enabled. + */ + if (!(int_val & (1 << (port_id % 8)))) + continue; + } + if (val & WCD9335_SLIM_IRQ_OVERFLOW) + dev_err_ratelimited(wcd->dev, + "%s: overflow error on %s port %d, value %x\n", + __func__, (tx ? "TX" : "RX"), port_id, val); + if (val & WCD9335_SLIM_IRQ_UNDERFLOW) + dev_err_ratelimited(wcd->dev, + "%s: underflow error on %s port %d, value %x\n", + __func__, (tx ? "TX" : "RX"), port_id, val); + if ((val & WCD9335_SLIM_IRQ_OVERFLOW) || + (val & WCD9335_SLIM_IRQ_UNDERFLOW)) { + if (!tx) + reg = WCD9335_SLIM_PGD_PORT_INT_EN0 + + (port_id / 8); + else + reg = WCD9335_SLIM_PGD_PORT_INT_TX_EN0 + + (port_id / 8); + regmap_read( + wcd->if_regmap, reg, &int_val); + if (int_val & (1 << (port_id % 8))) { + int_val = int_val ^ (1 << (port_id % 8)); + regmap_write(wcd->if_regmap, + reg, int_val); + } + } + + regmap_write(wcd->if_regmap, + WCD9335_SLIM_PGD_PORT_INT_CLR_RX_0 + (j / 8), + BIT(j % 8)); + } + + return IRQ_HANDLED; +} + +static int wcd9335_setup_irqs(struct wcd9335_codec *wcd) +{ + int slim_irq = regmap_irq_get_virq(wcd->irq_data, WCD9335_IRQ_SLIMBUS); + int i, ret = 0; + + ret = request_threaded_irq(slim_irq, NULL, wcd9335_slimbus_irq, + IRQF_TRIGGER_RISING, "SLIMBus Slave", wcd); + if (ret) { + dev_err(wcd->dev, "Failed to request SLIMBUS irq\n"); + return ret; + } + + /* enable interrupts on all slave ports */ + for (i = 0; i < WCD9335_SLIM_NUM_PORT_REG; i++) + regmap_write(wcd->if_regmap, WCD9335_SLIM_PGD_PORT_INT_EN0 + i, + 0xFF); + + return ret; +} + +static void wcd9335_cdc_sido_ccl_enable(struct wcd9335_codec *wcd, + bool ccl_flag) +{ + struct snd_soc_component *comp = wcd->component; + + if (ccl_flag) { + if (++wcd->sido_ccl_cnt == 1) + snd_soc_component_write(comp, WCD9335_SIDO_SIDO_CCL_10, + WCD9335_SIDO_SIDO_CCL_DEF_VALUE); + } else { + if (wcd->sido_ccl_cnt == 0) { + dev_err(wcd->dev, "sido_ccl already disabled\n"); + return; + } + if (--wcd->sido_ccl_cnt == 0) + snd_soc_component_write(comp, WCD9335_SIDO_SIDO_CCL_10, + WCD9335_SIDO_SIDO_CCL_10_ICHARG_PWR_SEL_C320FF); + } +} + +static int wcd9335_enable_master_bias(struct wcd9335_codec *wcd) +{ + wcd->master_bias_users++; + if (wcd->master_bias_users == 1) { + regmap_update_bits(wcd->regmap, WCD9335_ANA_BIAS, + WCD9335_ANA_BIAS_EN_MASK, + WCD9335_ANA_BIAS_ENABLE); + regmap_update_bits(wcd->regmap, WCD9335_ANA_BIAS, + WCD9335_ANA_BIAS_PRECHRG_EN_MASK, + WCD9335_ANA_BIAS_PRECHRG_ENABLE); + /* + * 1ms delay is required after pre-charge is enabled + * as per HW requirement + */ + usleep_range(1000, 1100); + regmap_update_bits(wcd->regmap, WCD9335_ANA_BIAS, + WCD9335_ANA_BIAS_PRECHRG_EN_MASK, + WCD9335_ANA_BIAS_PRECHRG_DISABLE); + regmap_update_bits(wcd->regmap, WCD9335_ANA_BIAS, + WCD9335_ANA_BIAS_PRECHRG_CTL_MODE, + WCD9335_ANA_BIAS_PRECHRG_CTL_MODE_MANUAL); + } + + return 0; +} + +static int wcd9335_enable_mclk(struct wcd9335_codec *wcd) +{ + /* Enable mclk requires master bias to be enabled first */ + if (wcd->master_bias_users <= 0) + return -EINVAL; + + if (((wcd->clk_mclk_users == 0) && (wcd->clk_type == WCD_CLK_MCLK)) || + ((wcd->clk_mclk_users > 0) && (wcd->clk_type != WCD_CLK_MCLK))) { + dev_err(wcd->dev, "Error enabling MCLK, clk_type: %d\n", + wcd->clk_type); + return -EINVAL; + } + + if (++wcd->clk_mclk_users == 1) { + regmap_update_bits(wcd->regmap, WCD9335_ANA_CLK_TOP, + WCD9335_ANA_CLK_EXT_CLKBUF_EN_MASK, + WCD9335_ANA_CLK_EXT_CLKBUF_ENABLE); + regmap_update_bits(wcd->regmap, WCD9335_ANA_CLK_TOP, + WCD9335_ANA_CLK_MCLK_SRC_MASK, + WCD9335_ANA_CLK_MCLK_SRC_EXTERNAL); + regmap_update_bits(wcd->regmap, WCD9335_ANA_CLK_TOP, + WCD9335_ANA_CLK_MCLK_EN_MASK, + WCD9335_ANA_CLK_MCLK_ENABLE); + regmap_update_bits(wcd->regmap, + WCD9335_CDC_CLK_RST_CTRL_FS_CNT_CONTROL, + WCD9335_CDC_CLK_RST_CTRL_FS_CNT_EN_MASK, + WCD9335_CDC_CLK_RST_CTRL_FS_CNT_ENABLE); + regmap_update_bits(wcd->regmap, + WCD9335_CDC_CLK_RST_CTRL_MCLK_CONTROL, + WCD9335_CDC_CLK_RST_CTRL_MCLK_EN_MASK, + WCD9335_CDC_CLK_RST_CTRL_MCLK_ENABLE); + /* + * 10us sleep is required after clock is enabled + * as per HW requirement + */ + usleep_range(10, 15); + } + + wcd->clk_type = WCD_CLK_MCLK; + + return 0; +} + +static int wcd9335_disable_mclk(struct wcd9335_codec *wcd) +{ + if (wcd->clk_mclk_users <= 0) + return -EINVAL; + + if (--wcd->clk_mclk_users == 0) { + if (wcd->clk_rco_users > 0) { + /* MCLK to RCO switch */ + regmap_update_bits(wcd->regmap, WCD9335_ANA_CLK_TOP, + WCD9335_ANA_CLK_MCLK_SRC_MASK, + WCD9335_ANA_CLK_MCLK_SRC_RCO); + wcd->clk_type = WCD_CLK_RCO; + } else { + regmap_update_bits(wcd->regmap, WCD9335_ANA_CLK_TOP, + WCD9335_ANA_CLK_MCLK_EN_MASK, + WCD9335_ANA_CLK_MCLK_DISABLE); + wcd->clk_type = WCD_CLK_OFF; + } + + regmap_update_bits(wcd->regmap, WCD9335_ANA_CLK_TOP, + WCD9335_ANA_CLK_EXT_CLKBUF_EN_MASK, + WCD9335_ANA_CLK_EXT_CLKBUF_DISABLE); + } + + return 0; +} + +static int wcd9335_disable_master_bias(struct wcd9335_codec *wcd) +{ + if (wcd->master_bias_users <= 0) + return -EINVAL; + + wcd->master_bias_users--; + if (wcd->master_bias_users == 0) { + regmap_update_bits(wcd->regmap, WCD9335_ANA_BIAS, + WCD9335_ANA_BIAS_EN_MASK, + WCD9335_ANA_BIAS_DISABLE); + regmap_update_bits(wcd->regmap, WCD9335_ANA_BIAS, + WCD9335_ANA_BIAS_PRECHRG_CTL_MODE, + WCD9335_ANA_BIAS_PRECHRG_CTL_MODE_MANUAL); + } + return 0; +} + +static int wcd9335_cdc_req_mclk_enable(struct wcd9335_codec *wcd, + bool enable) +{ + int ret = 0; + + if (enable) { + wcd9335_cdc_sido_ccl_enable(wcd, true); + ret = clk_prepare_enable(wcd->mclk); + if (ret) { + dev_err(wcd->dev, "%s: ext clk enable failed\n", + __func__); + goto err; + } + /* get BG */ + wcd9335_enable_master_bias(wcd); + /* get MCLK */ + wcd9335_enable_mclk(wcd); + + } else { + /* put MCLK */ + wcd9335_disable_mclk(wcd); + /* put BG */ + wcd9335_disable_master_bias(wcd); + clk_disable_unprepare(wcd->mclk); + wcd9335_cdc_sido_ccl_enable(wcd, false); + } +err: + return ret; +} + +static void wcd9335_codec_apply_sido_voltage(struct wcd9335_codec *wcd, + enum wcd9335_sido_voltage req_mv) +{ + struct snd_soc_component *comp = wcd->component; + int vout_d_val; + + if (req_mv == wcd->sido_voltage) + return; + + /* compute the vout_d step value */ + vout_d_val = WCD9335_CALCULATE_VOUT_D(req_mv) & + WCD9335_ANA_BUCK_VOUT_MASK; + snd_soc_component_write(comp, WCD9335_ANA_BUCK_VOUT_D, vout_d_val); + snd_soc_component_update_bits(comp, WCD9335_ANA_BUCK_CTL, + WCD9335_ANA_BUCK_CTL_RAMP_START_MASK, + WCD9335_ANA_BUCK_CTL_RAMP_START_ENABLE); + + /* 1 msec sleep required after SIDO Vout_D voltage change */ + usleep_range(1000, 1100); + wcd->sido_voltage = req_mv; + snd_soc_component_update_bits(comp, WCD9335_ANA_BUCK_CTL, + WCD9335_ANA_BUCK_CTL_RAMP_START_MASK, + WCD9335_ANA_BUCK_CTL_RAMP_START_DISABLE); +} + +static int wcd9335_codec_update_sido_voltage(struct wcd9335_codec *wcd, + enum wcd9335_sido_voltage req_mv) +{ + int ret = 0; + + /* enable mclk before setting SIDO voltage */ + ret = wcd9335_cdc_req_mclk_enable(wcd, true); + if (ret) { + dev_err(wcd->dev, "Ext clk enable failed\n"); + goto err; + } + + wcd9335_codec_apply_sido_voltage(wcd, req_mv); + wcd9335_cdc_req_mclk_enable(wcd, false); + +err: + return ret; +} + +static int _wcd9335_codec_enable_mclk(struct snd_soc_component *component, + int enable) +{ + struct wcd9335_codec *wcd = dev_get_drvdata(component->dev); + int ret; + + if (enable) { + ret = wcd9335_cdc_req_mclk_enable(wcd, true); + if (ret) + return ret; + + wcd9335_codec_apply_sido_voltage(wcd, + SIDO_VOLTAGE_NOMINAL_MV); + } else { + wcd9335_codec_update_sido_voltage(wcd, + wcd->sido_voltage); + wcd9335_cdc_req_mclk_enable(wcd, false); + } + + return 0; +} + +static void wcd9335_enable_sido_buck(struct snd_soc_component *component) +{ + struct wcd9335_codec *wcd = dev_get_drvdata(component->dev); + + snd_soc_component_update_bits(component, WCD9335_ANA_RCO, + WCD9335_ANA_RCO_BG_EN_MASK, + WCD9335_ANA_RCO_BG_ENABLE); + snd_soc_component_update_bits(component, WCD9335_ANA_BUCK_CTL, + WCD9335_ANA_BUCK_CTL_VOUT_D_IREF_MASK, + WCD9335_ANA_BUCK_CTL_VOUT_D_IREF_EXT); + /* 100us sleep needed after IREF settings */ + usleep_range(100, 110); + snd_soc_component_update_bits(component, WCD9335_ANA_BUCK_CTL, + WCD9335_ANA_BUCK_CTL_VOUT_D_VREF_MASK, + WCD9335_ANA_BUCK_CTL_VOUT_D_VREF_EXT); + /* 100us sleep needed after VREF settings */ + usleep_range(100, 110); + wcd->sido_input_src = SIDO_SOURCE_RCO_BG; +} + +static int wcd9335_enable_efuse_sensing(struct snd_soc_component *comp) +{ + _wcd9335_codec_enable_mclk(comp, true); + snd_soc_component_update_bits(comp, + WCD9335_CHIP_TIER_CTRL_EFUSE_CTL, + WCD9335_CHIP_TIER_CTRL_EFUSE_EN_MASK, + WCD9335_CHIP_TIER_CTRL_EFUSE_ENABLE); + /* + * 5ms sleep required after enabling efuse control + * before checking the status. + */ + usleep_range(5000, 5500); + + if (!(snd_soc_component_read32(comp, + WCD9335_CHIP_TIER_CTRL_EFUSE_STATUS) & + WCD9335_CHIP_TIER_CTRL_EFUSE_EN_MASK)) + WARN(1, "%s: Efuse sense is not complete\n", __func__); + + wcd9335_enable_sido_buck(comp); + _wcd9335_codec_enable_mclk(comp, false); + + return 0; +} + +static void wcd9335_codec_init(struct snd_soc_component *component) +{ + struct wcd9335_codec *wcd = dev_get_drvdata(component->dev); + int i; + + /* ungate MCLK and set clk rate */ + regmap_update_bits(wcd->regmap, WCD9335_CODEC_RPM_CLK_GATE, + WCD9335_CODEC_RPM_CLK_GATE_MCLK_GATE_MASK, 0); + + regmap_update_bits(wcd->regmap, WCD9335_CODEC_RPM_CLK_MCLK_CFG, + WCD9335_CODEC_RPM_CLK_MCLK_CFG_MCLK_MASK, + WCD9335_CODEC_RPM_CLK_MCLK_CFG_9P6MHZ); + + for (i = 0; i < ARRAY_SIZE(wcd9335_codec_reg_init_common_val); i++) + snd_soc_component_update_bits(component, + wcd9335_codec_reg_init_common_val[i].reg, + wcd9335_codec_reg_init_common_val[i].mask, + wcd9335_codec_reg_init_common_val[i].val); + + if (WCD9335_IS_2_0(wcd->version)) { + for (i = 0; i < ARRAY_SIZE(wcd9335_codec_reg_init_val_2_0); i++) + snd_soc_component_update_bits(component, + wcd9335_codec_reg_init_val_2_0[i].reg, + wcd9335_codec_reg_init_val_2_0[i].mask, + wcd9335_codec_reg_init_val_2_0[i].val); + } + + wcd9335_enable_efuse_sensing(component); +} + +static int wcd9335_codec_probe(struct snd_soc_component *component) +{ + struct wcd9335_codec *wcd = dev_get_drvdata(component->dev); + int i; + + snd_soc_component_init_regmap(component, wcd->regmap); + wcd->component = component; + + wcd9335_codec_init(component); + + for (i = 0; i < NUM_CODEC_DAIS; i++) + INIT_LIST_HEAD(&wcd->dai[i].slim_ch_list); + + return wcd9335_setup_irqs(wcd); +} + +static void wcd9335_codec_remove(struct snd_soc_component *comp) +{ + struct wcd9335_codec *wcd = dev_get_drvdata(comp->dev); + + free_irq(regmap_irq_get_virq(wcd->irq_data, WCD9335_IRQ_SLIMBUS), wcd); +} + +static int wcd9335_codec_set_sysclk(struct snd_soc_component *comp, + int clk_id, int source, + unsigned int freq, int dir) +{ + struct wcd9335_codec *wcd = dev_get_drvdata(comp->dev); + + wcd->mclk_rate = freq; + + if (wcd->mclk_rate == WCD9335_MCLK_CLK_12P288MHZ) + snd_soc_component_update_bits(comp, + WCD9335_CODEC_RPM_CLK_MCLK_CFG, + WCD9335_CODEC_RPM_CLK_MCLK_CFG_MCLK_MASK, + WCD9335_CODEC_RPM_CLK_MCLK_CFG_12P288MHZ); + else if (wcd->mclk_rate == WCD9335_MCLK_CLK_9P6MHZ) + snd_soc_component_update_bits(comp, + WCD9335_CODEC_RPM_CLK_MCLK_CFG, + WCD9335_CODEC_RPM_CLK_MCLK_CFG_MCLK_MASK, + WCD9335_CODEC_RPM_CLK_MCLK_CFG_9P6MHZ); + + return clk_set_rate(wcd->mclk, freq); +} + +static const struct snd_soc_component_driver wcd9335_component_drv = { + .probe = wcd9335_codec_probe, + .remove = wcd9335_codec_remove, + .set_sysclk = wcd9335_codec_set_sysclk, +}; + +static int wcd9335_probe(struct platform_device *pdev) +{ + struct wcd9335 *pdata = dev_get_drvdata(pdev->dev.parent); + struct device *dev = &pdev->dev; + struct wcd9335_codec *wcd; + + wcd = devm_kzalloc(dev, sizeof(*wcd), GFP_KERNEL); + if (!wcd) + return -ENOMEM; + + dev_set_drvdata(dev, wcd); + + memcpy(wcd->rx_chs, wcd9335_rx_chs, sizeof(wcd9335_rx_chs)); + + wcd->regmap = pdata->regmap; + wcd->if_regmap = pdata->ifd_regmap; + wcd->slim = pdata->slim; + wcd->slim_ifd = pdata->slim_ifd; + wcd->irq_data = pdata->irq_data; + wcd->version = pdata->version; + wcd->intf_type = pdata->intf_type; + wcd->dev = dev; + wcd->mclk = pdata->mclk; + wcd->native_clk = pdata->native_clk; + wcd->sido_input_src = SIDO_SOURCE_INTERNAL; + wcd->sido_voltage = SIDO_VOLTAGE_NOMINAL_MV; + + return devm_snd_soc_register_component(dev, &wcd9335_component_drv, + wcd9335_slim_dais, + ARRAY_SIZE(wcd9335_slim_dais)); +} + +static struct platform_driver wcd9335_codec_driver = { + .probe = wcd9335_probe, + .driver = { + .name = "wcd9335-codec", + }, +}; +module_platform_driver(wcd9335_codec_driver); +MODULE_DESCRIPTION("WCD9335 Codec driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3 From c8cb5f775c8dacb605e628a320ded42be3bd9453 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Fri, 27 Jul 2018 13:18:01 +0100 Subject: ASoC: wcd9335: add CLASS-H Controller support CLASS-H controller/Amplifier is common accorss Qualcomm WCD codec series. This patchset adds basic CLASS-H controller apis for WCD codecs after wcd9335 to use. Signed-off-by: Srinivas Kandagatla Reviewed-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/codecs/Makefile | 2 +- sound/soc/codecs/wcd-clsh.c | 605 ++++++++++++++++++++++++++++++++++++++++++++ sound/soc/codecs/wcd-clsh.h | 49 ++++ sound/soc/codecs/wcd9335.c | 10 + 4 files changed, 665 insertions(+), 1 deletion(-) create mode 100644 sound/soc/codecs/wcd-clsh.c create mode 100644 sound/soc/codecs/wcd-clsh.h diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 01410b63daac..e3a3d4694e15 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -192,7 +192,7 @@ snd-soc-twl4030-objs := twl4030.o snd-soc-twl6040-objs := twl6040.o snd-soc-uda134x-objs := uda134x.o snd-soc-uda1380-objs := uda1380.o -snd-soc-wcd9335-objs := wcd9335.o +snd-soc-wcd9335-objs := wcd-clsh.o wcd9335.o snd-soc-wl1273-objs := wl1273.o snd-soc-wm-adsp-objs := wm_adsp.o snd-soc-wm0010-objs := wm0010.o diff --git a/sound/soc/codecs/wcd-clsh.c b/sound/soc/codecs/wcd-clsh.c new file mode 100644 index 000000000000..2393456cbd97 --- /dev/null +++ b/sound/soc/codecs/wcd-clsh.c @@ -0,0 +1,605 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2015-2016, The Linux Foundation. All rights reserved. +// Copyright (c) 2017-2018, Linaro Limited + +#include +#include +#include +#include +#include +#include +#include "wcd-clsh.h" + +struct wcd_clsh_ctrl { + int state; + int mode; + int flyback_users; + int buck_users; + int clsh_users; + int codec_version; + struct snd_soc_component *comp; +}; + +/* Class-H registers for codecs from and above WCD9335 */ +#define WCD9XXX_A_CDC_RX0_RX_PATH_CFG0 WCD9335_REG(0xB, 0x42) +#define WCD9XXX_A_CDC_RX_PATH_CLSH_EN_MASK BIT(6) +#define WCD9XXX_A_CDC_RX_PATH_CLSH_ENABLE BIT(6) +#define WCD9XXX_A_CDC_RX_PATH_CLSH_DISABLE 0 +#define WCD9XXX_A_CDC_RX1_RX_PATH_CFG0 WCD9335_REG(0xB, 0x56) +#define WCD9XXX_A_CDC_RX2_RX_PATH_CFG0 WCD9335_REG(0xB, 0x6A) +#define WCD9XXX_A_CDC_CLSH_K1_MSB WCD9335_REG(0xC, 0x08) +#define WCD9XXX_A_CDC_CLSH_K1_MSB_COEF_MASK GENMASK(3, 0) +#define WCD9XXX_A_CDC_CLSH_K1_LSB WCD9335_REG(0xC, 0x09) +#define WCD9XXX_A_CDC_CLSH_K1_LSB_COEF_MASK GENMASK(7, 0) +#define WCD9XXX_A_ANA_RX_SUPPLIES WCD9335_REG(0x6, 0x08) +#define WCD9XXX_A_ANA_RX_REGULATOR_MODE_MASK BIT(1) +#define WCD9XXX_A_ANA_RX_REGULATOR_MODE_CLS_H 0 +#define WCD9XXX_A_ANA_RX_REGULATOR_MODE_CLS_AB BIT(1) +#define WCD9XXX_A_ANA_RX_VNEG_PWR_LVL_MASK BIT(2) +#define WCD9XXX_A_ANA_RX_VNEG_PWR_LVL_UHQA BIT(2) +#define WCD9XXX_A_ANA_RX_VNEG_PWR_LVL_DEFAULT 0 +#define WCD9XXX_A_ANA_RX_VPOS_PWR_LVL_MASK BIT(3) +#define WCD9XXX_A_ANA_RX_VPOS_PWR_LVL_UHQA BIT(3) +#define WCD9XXX_A_ANA_RX_VPOS_PWR_LVL_DEFAULT 0 +#define WCD9XXX_A_ANA_RX_VNEG_EN_MASK BIT(6) +#define WCD9XXX_A_ANA_RX_VNEG_EN_SHIFT 6 +#define WCD9XXX_A_ANA_RX_VNEG_ENABLE BIT(6) +#define WCD9XXX_A_ANA_RX_VNEG_DISABLE 0 +#define WCD9XXX_A_ANA_RX_VPOS_EN_MASK BIT(7) +#define WCD9XXX_A_ANA_RX_VPOS_EN_SHIFT 7 +#define WCD9XXX_A_ANA_RX_VPOS_ENABLE BIT(7) +#define WCD9XXX_A_ANA_RX_VPOS_DISABLE 0 +#define WCD9XXX_A_ANA_HPH WCD9335_REG(0x6, 0x09) +#define WCD9XXX_A_ANA_HPH_PWR_LEVEL_MASK GENMASK(3, 2) +#define WCD9XXX_A_ANA_HPH_PWR_LEVEL_UHQA 0x08 +#define WCD9XXX_A_ANA_HPH_PWR_LEVEL_LP 0x04 +#define WCD9XXX_A_ANA_HPH_PWR_LEVEL_NORMAL 0x0 +#define WCD9XXX_A_CDC_CLSH_CRC WCD9335_REG(0xC, 0x01) +#define WCD9XXX_A_CDC_CLSH_CRC_CLK_EN_MASK BIT(0) +#define WCD9XXX_A_CDC_CLSH_CRC_CLK_ENABLE BIT(0) +#define WCD9XXX_A_CDC_CLSH_CRC_CLK_DISABLE 0 +#define WCD9XXX_FLYBACK_EN WCD9335_REG(0x6, 0xA4) +#define WCD9XXX_FLYBACK_EN_DELAY_SEL_MASK GENMASK(6, 5) +#define WCD9XXX_FLYBACK_EN_DELAY_26P25_US 0x40 +#define WCD9XXX_FLYBACK_EN_RESET_BY_EXT_MASK BIT(4) +#define WCD9XXX_FLYBACK_EN_PWDN_WITHOUT_DELAY BIT(4) +#define WCD9XXX_FLYBACK_EN_PWDN_WITH_DELAY 0 +#define WCD9XXX_RX_BIAS_FLYB_BUFF WCD9335_REG(0x6, 0xC7) +#define WCD9XXX_RX_BIAS_FLYB_VNEG_5_UA_MASK GENMASK(7, 4) +#define WCD9XXX_RX_BIAS_FLYB_VPOS_5_UA_MASK GENMASK(0, 3) +#define WCD9XXX_HPH_L_EN WCD9335_REG(0x6, 0xD3) +#define WCD9XXX_HPH_CONST_SEL_L_MASK GENMASK(7, 3) +#define WCD9XXX_HPH_CONST_SEL_BYPASS 0 +#define WCD9XXX_HPH_CONST_SEL_LP_PATH 0x40 +#define WCD9XXX_HPH_CONST_SEL_HQ_PATH 0x80 +#define WCD9XXX_HPH_R_EN WCD9335_REG(0x6, 0xD6) +#define WCD9XXX_HPH_REFBUFF_UHQA_CTL WCD9335_REG(0x6, 0xDD) +#define WCD9XXX_HPH_REFBUFF_UHQA_GAIN_MASK GENMASK(2, 0) +#define WCD9XXX_CLASSH_CTRL_VCL_2 WCD9335_REG(0x6, 0x9B) +#define WCD9XXX_CLASSH_CTRL_VCL_2_VREF_FILT_1_MASK GENMASK(5, 4) +#define WCD9XXX_CLASSH_CTRL_VCL_VREF_FILT_R_50KOHM 0x20 +#define WCD9XXX_CLASSH_CTRL_VCL_VREF_FILT_R_0KOHM 0x0 +#define WCD9XXX_CDC_RX1_RX_PATH_CTL WCD9335_REG(0xB, 0x55) +#define WCD9XXX_CDC_RX2_RX_PATH_CTL WCD9335_REG(0xB, 0x69) +#define WCD9XXX_CDC_CLK_RST_CTRL_MCLK_CONTROL WCD9335_REG(0xD, 0x41) +#define WCD9XXX_CDC_CLK_RST_CTRL_MCLK_EN_MASK BIT(0) +#define WCD9XXX_CDC_CLK_RST_CTRL_MCLK_11P3_EN_MASK BIT(1) +#define WCD9XXX_CLASSH_CTRL_CCL_1 WCD9335_REG(0x6, 0x9C) +#define WCD9XXX_CLASSH_CTRL_CCL_1_DELTA_IPEAK_MASK GENMASK(7, 4) +#define WCD9XXX_CLASSH_CTRL_CCL_1_DELTA_IPEAK_50MA 0x50 +#define WCD9XXX_CLASSH_CTRL_CCL_1_DELTA_IPEAK_30MA 0x30 + +#define CLSH_REQ_ENABLE true +#define CLSH_REQ_DISABLE false +#define WCD_USLEEP_RANGE 50 + +enum { + DAC_GAIN_0DB = 0, + DAC_GAIN_0P2DB, + DAC_GAIN_0P4DB, + DAC_GAIN_0P6DB, + DAC_GAIN_0P8DB, + DAC_GAIN_M0P2DB, + DAC_GAIN_M0P4DB, + DAC_GAIN_M0P6DB, +}; + +static inline void wcd_enable_clsh_block(struct wcd_clsh_ctrl *ctrl, + bool enable) +{ + struct snd_soc_component *comp = ctrl->comp; + + if ((enable && ++ctrl->clsh_users == 1) || + (!enable && --ctrl->clsh_users == 0)) + snd_soc_component_update_bits(comp, WCD9XXX_A_CDC_CLSH_CRC, + WCD9XXX_A_CDC_CLSH_CRC_CLK_EN_MASK, + enable); + if (ctrl->clsh_users < 0) + ctrl->clsh_users = 0; +} + +static inline bool wcd_clsh_enable_status(struct snd_soc_component *comp) +{ + return snd_soc_component_read32(comp, WCD9XXX_A_CDC_CLSH_CRC) & + WCD9XXX_A_CDC_CLSH_CRC_CLK_EN_MASK; +} + +static inline void wcd_clsh_set_buck_mode(struct snd_soc_component *comp, + int mode) +{ + /* set to HIFI */ + if (mode == CLS_H_HIFI) + snd_soc_component_update_bits(comp, WCD9XXX_A_ANA_RX_SUPPLIES, + WCD9XXX_A_ANA_RX_VPOS_PWR_LVL_MASK, + WCD9XXX_A_ANA_RX_VPOS_PWR_LVL_UHQA); + else + snd_soc_component_update_bits(comp, WCD9XXX_A_ANA_RX_SUPPLIES, + WCD9XXX_A_ANA_RX_VPOS_PWR_LVL_MASK, + WCD9XXX_A_ANA_RX_VPOS_PWR_LVL_DEFAULT); +} + +static inline void wcd_clsh_set_flyback_mode(struct snd_soc_component *comp, + int mode) +{ + /* set to HIFI */ + if (mode == CLS_H_HIFI) + snd_soc_component_update_bits(comp, WCD9XXX_A_ANA_RX_SUPPLIES, + WCD9XXX_A_ANA_RX_VNEG_PWR_LVL_MASK, + WCD9XXX_A_ANA_RX_VNEG_PWR_LVL_UHQA); + else + snd_soc_component_update_bits(comp, WCD9XXX_A_ANA_RX_SUPPLIES, + WCD9XXX_A_ANA_RX_VNEG_PWR_LVL_MASK, + WCD9XXX_A_ANA_RX_VNEG_PWR_LVL_DEFAULT); +} + +static void wcd_clsh_buck_ctrl(struct wcd_clsh_ctrl *ctrl, + int mode, + bool enable) +{ + struct snd_soc_component *comp = ctrl->comp; + + /* enable/disable buck */ + if ((enable && (++ctrl->buck_users == 1)) || + (!enable && (--ctrl->buck_users == 0))) + snd_soc_component_update_bits(comp, WCD9XXX_A_ANA_RX_SUPPLIES, + WCD9XXX_A_ANA_RX_VPOS_EN_MASK, + enable << WCD9XXX_A_ANA_RX_VPOS_EN_SHIFT); + /* + * 500us sleep is required after buck enable/disable + * as per HW requirement + */ + usleep_range(500, 500 + WCD_USLEEP_RANGE); +} + +static void wcd_clsh_flyback_ctrl(struct wcd_clsh_ctrl *ctrl, + int mode, + bool enable) +{ + struct snd_soc_component *comp = ctrl->comp; + + int vneg[] = {0x00, 0x40}; + + /* enable/disable flyback */ + if ((enable && (++ctrl->flyback_users == 1)) || + (!enable && (--ctrl->flyback_users == 0))) { + snd_soc_component_update_bits(comp, WCD9XXX_A_ANA_RX_SUPPLIES, + WCD9XXX_A_ANA_RX_VNEG_EN_MASK, + enable << WCD9XXX_A_ANA_RX_VNEG_EN_SHIFT); + /* 100usec delay is needed as per HW requirement */ + usleep_range(100, 110); + + if (enable && (WCD9335_IS_1_1(ctrl->codec_version))) { + wcd_clsh_set_flyback_mode(comp, CLS_H_HIFI); + snd_soc_component_update_bits(comp, WCD9XXX_FLYBACK_EN, + WCD9XXX_FLYBACK_EN_DELAY_SEL_MASK, + WCD9XXX_FLYBACK_EN_DELAY_26P25_US); + snd_soc_component_update_bits(comp, WCD9XXX_FLYBACK_EN, + WCD9XXX_FLYBACK_EN_RESET_BY_EXT_MASK, + WCD9XXX_FLYBACK_EN_PWDN_WITHOUT_DELAY); + vneg[0] = snd_soc_component_read32(comp, + WCD9XXX_A_ANA_RX_SUPPLIES); + vneg[0] &= ~(0x40); + vneg[1] = vneg[0] | 0x40; + + snd_soc_component_write(comp, + WCD9XXX_A_ANA_RX_SUPPLIES, vneg[0]); + snd_soc_component_write(comp, + WCD9XXX_A_ANA_RX_SUPPLIES, vneg[1]); + /* 500usec delay is needed as per HW requirement */ + usleep_range(500, 510); + snd_soc_component_update_bits(comp, WCD9XXX_FLYBACK_EN, + WCD9XXX_FLYBACK_EN_RESET_BY_EXT_MASK, + WCD9XXX_FLYBACK_EN_PWDN_WITH_DELAY); + wcd_clsh_set_flyback_mode(comp, mode); + } + + } + /* + * 500us sleep is required after flyback enable/disable + * as per HW requirement + */ + usleep_range(500, 500 + WCD_USLEEP_RANGE); +} + +static void wcd_clsh_set_gain_path(struct wcd_clsh_ctrl *ctrl, int mode) +{ + struct snd_soc_component *comp = ctrl->comp; + int val = 0; + + switch (mode) { + case CLS_H_NORMAL: + case CLS_AB: + val = WCD9XXX_HPH_CONST_SEL_BYPASS; + break; + case CLS_H_HIFI: + val = WCD9XXX_HPH_CONST_SEL_HQ_PATH; + break; + case CLS_H_LP: + val = WCD9XXX_HPH_CONST_SEL_LP_PATH; + break; + }; + + snd_soc_component_update_bits(comp, WCD9XXX_HPH_L_EN, + WCD9XXX_HPH_CONST_SEL_L_MASK, + val); + + snd_soc_component_update_bits(comp, WCD9XXX_HPH_R_EN, + WCD9XXX_HPH_CONST_SEL_L_MASK, + val); +} + +static void wcd_clsh_set_hph_mode(struct snd_soc_component *comp, + int mode) +{ + int val = 0, gain = 0, res_val; + int ipeak = WCD9XXX_CLASSH_CTRL_CCL_1_DELTA_IPEAK_50MA; + + res_val = WCD9XXX_CLASSH_CTRL_VCL_VREF_FILT_R_0KOHM; + switch (mode) { + case CLS_H_NORMAL: + res_val = WCD9XXX_CLASSH_CTRL_VCL_VREF_FILT_R_50KOHM; + val = WCD9XXX_A_ANA_HPH_PWR_LEVEL_NORMAL; + gain = DAC_GAIN_0DB; + ipeak = WCD9XXX_CLASSH_CTRL_CCL_1_DELTA_IPEAK_50MA; + break; + case CLS_AB: + val = WCD9XXX_A_ANA_HPH_PWR_LEVEL_NORMAL; + gain = DAC_GAIN_0DB; + ipeak = WCD9XXX_CLASSH_CTRL_CCL_1_DELTA_IPEAK_50MA; + break; + case CLS_H_HIFI: + val = WCD9XXX_A_ANA_HPH_PWR_LEVEL_UHQA; + gain = DAC_GAIN_M0P2DB; + ipeak = WCD9XXX_CLASSH_CTRL_CCL_1_DELTA_IPEAK_50MA; + break; + case CLS_H_LP: + val = WCD9XXX_A_ANA_HPH_PWR_LEVEL_LP; + ipeak = WCD9XXX_CLASSH_CTRL_CCL_1_DELTA_IPEAK_30MA; + break; + }; + + snd_soc_component_update_bits(comp, WCD9XXX_A_ANA_HPH, + WCD9XXX_A_ANA_HPH_PWR_LEVEL_MASK, val); + snd_soc_component_update_bits(comp, WCD9XXX_CLASSH_CTRL_VCL_2, + WCD9XXX_CLASSH_CTRL_VCL_2_VREF_FILT_1_MASK, + res_val); + if (mode != CLS_H_LP) + snd_soc_component_update_bits(comp, + WCD9XXX_HPH_REFBUFF_UHQA_CTL, + WCD9XXX_HPH_REFBUFF_UHQA_GAIN_MASK, + gain); + snd_soc_component_update_bits(comp, WCD9XXX_CLASSH_CTRL_CCL_1, + WCD9XXX_CLASSH_CTRL_CCL_1_DELTA_IPEAK_MASK, + ipeak); +} + +static void wcd_clsh_set_flyback_current(struct snd_soc_component *comp, + int mode) +{ + + snd_soc_component_update_bits(comp, WCD9XXX_RX_BIAS_FLYB_BUFF, + WCD9XXX_RX_BIAS_FLYB_VPOS_5_UA_MASK, 0x0A); + snd_soc_component_update_bits(comp, WCD9XXX_RX_BIAS_FLYB_BUFF, + WCD9XXX_RX_BIAS_FLYB_VNEG_5_UA_MASK, 0x0A); + /* Sleep needed to avoid click and pop as per HW requirement */ + usleep_range(100, 110); +} + +static void wcd_clsh_set_buck_regulator_mode(struct snd_soc_component *comp, + int mode) +{ + if (mode == CLS_AB) + snd_soc_component_update_bits(comp, WCD9XXX_A_ANA_RX_SUPPLIES, + WCD9XXX_A_ANA_RX_REGULATOR_MODE_MASK, + WCD9XXX_A_ANA_RX_REGULATOR_MODE_CLS_AB); + else + snd_soc_component_update_bits(comp, WCD9XXX_A_ANA_RX_SUPPLIES, + WCD9XXX_A_ANA_RX_REGULATOR_MODE_MASK, + WCD9XXX_A_ANA_RX_REGULATOR_MODE_CLS_H); +} + +static void wcd_clsh_state_lo(struct wcd_clsh_ctrl *ctrl, int req_state, + bool is_enable, int mode) +{ + struct snd_soc_component *comp = ctrl->comp; + + if (mode != CLS_AB) { + dev_err(comp->dev, "%s: LO cannot be in this mode: %d\n", + __func__, mode); + return; + } + + if (is_enable) { + wcd_clsh_set_buck_regulator_mode(comp, mode); + wcd_clsh_set_buck_mode(comp, mode); + wcd_clsh_set_flyback_mode(comp, mode); + wcd_clsh_flyback_ctrl(ctrl, mode, true); + wcd_clsh_set_flyback_current(comp, mode); + wcd_clsh_buck_ctrl(ctrl, mode, true); + } else { + wcd_clsh_buck_ctrl(ctrl, mode, false); + wcd_clsh_flyback_ctrl(ctrl, mode, false); + wcd_clsh_set_flyback_mode(comp, CLS_H_NORMAL); + wcd_clsh_set_buck_mode(comp, CLS_H_NORMAL); + wcd_clsh_set_buck_regulator_mode(comp, CLS_H_NORMAL); + } +} + +static void wcd_clsh_state_hph_r(struct wcd_clsh_ctrl *ctrl, int req_state, + bool is_enable, int mode) +{ + struct snd_soc_component *comp = ctrl->comp; + + if (mode == CLS_H_NORMAL) { + dev_err(comp->dev, "%s: Normal mode not applicable for hph_r\n", + __func__); + return; + } + + if (is_enable) { + if (mode != CLS_AB) { + wcd_enable_clsh_block(ctrl, true); + /* + * These K1 values depend on the Headphone Impedance + * For now it is assumed to be 16 ohm + */ + snd_soc_component_update_bits(comp, + WCD9XXX_A_CDC_CLSH_K1_MSB, + WCD9XXX_A_CDC_CLSH_K1_MSB_COEF_MASK, + 0x00); + snd_soc_component_update_bits(comp, + WCD9XXX_A_CDC_CLSH_K1_LSB, + WCD9XXX_A_CDC_CLSH_K1_LSB_COEF_MASK, + 0xC0); + snd_soc_component_update_bits(comp, + WCD9XXX_A_CDC_RX2_RX_PATH_CFG0, + WCD9XXX_A_CDC_RX_PATH_CLSH_EN_MASK, + WCD9XXX_A_CDC_RX_PATH_CLSH_ENABLE); + } + wcd_clsh_set_buck_regulator_mode(comp, mode); + wcd_clsh_set_flyback_mode(comp, mode); + wcd_clsh_flyback_ctrl(ctrl, mode, true); + wcd_clsh_set_flyback_current(comp, mode); + wcd_clsh_set_buck_mode(comp, mode); + wcd_clsh_buck_ctrl(ctrl, mode, true); + wcd_clsh_set_hph_mode(comp, mode); + wcd_clsh_set_gain_path(ctrl, mode); + } else { + wcd_clsh_set_hph_mode(comp, CLS_H_NORMAL); + + if (mode != CLS_AB) { + snd_soc_component_update_bits(comp, + WCD9XXX_A_CDC_RX2_RX_PATH_CFG0, + WCD9XXX_A_CDC_RX_PATH_CLSH_EN_MASK, + WCD9XXX_A_CDC_RX_PATH_CLSH_DISABLE); + wcd_enable_clsh_block(ctrl, false); + } + /* buck and flyback set to default mode and disable */ + wcd_clsh_buck_ctrl(ctrl, CLS_H_NORMAL, false); + wcd_clsh_flyback_ctrl(ctrl, CLS_H_NORMAL, false); + wcd_clsh_set_flyback_mode(comp, CLS_H_NORMAL); + wcd_clsh_set_buck_mode(comp, CLS_H_NORMAL); + wcd_clsh_set_buck_regulator_mode(comp, CLS_H_NORMAL); + } +} + +static void wcd_clsh_state_hph_l(struct wcd_clsh_ctrl *ctrl, int req_state, + bool is_enable, int mode) +{ + struct snd_soc_component *comp = ctrl->comp; + + if (mode == CLS_H_NORMAL) { + dev_err(comp->dev, "%s: Normal mode not applicable for hph_l\n", + __func__); + return; + } + + if (is_enable) { + if (mode != CLS_AB) { + wcd_enable_clsh_block(ctrl, true); + /* + * These K1 values depend on the Headphone Impedance + * For now it is assumed to be 16 ohm + */ + snd_soc_component_update_bits(comp, + WCD9XXX_A_CDC_CLSH_K1_MSB, + WCD9XXX_A_CDC_CLSH_K1_MSB_COEF_MASK, + 0x00); + snd_soc_component_update_bits(comp, + WCD9XXX_A_CDC_CLSH_K1_LSB, + WCD9XXX_A_CDC_CLSH_K1_LSB_COEF_MASK, + 0xC0); + snd_soc_component_update_bits(comp, + WCD9XXX_A_CDC_RX1_RX_PATH_CFG0, + WCD9XXX_A_CDC_RX_PATH_CLSH_EN_MASK, + WCD9XXX_A_CDC_RX_PATH_CLSH_ENABLE); + } + wcd_clsh_set_buck_regulator_mode(comp, mode); + wcd_clsh_set_flyback_mode(comp, mode); + wcd_clsh_flyback_ctrl(ctrl, mode, true); + wcd_clsh_set_flyback_current(comp, mode); + wcd_clsh_set_buck_mode(comp, mode); + wcd_clsh_buck_ctrl(ctrl, mode, true); + wcd_clsh_set_hph_mode(comp, mode); + wcd_clsh_set_gain_path(ctrl, mode); + } else { + wcd_clsh_set_hph_mode(comp, CLS_H_NORMAL); + + if (mode != CLS_AB) { + snd_soc_component_update_bits(comp, + WCD9XXX_A_CDC_RX1_RX_PATH_CFG0, + WCD9XXX_A_CDC_RX_PATH_CLSH_EN_MASK, + WCD9XXX_A_CDC_RX_PATH_CLSH_DISABLE); + wcd_enable_clsh_block(ctrl, false); + } + /* set buck and flyback to Default Mode */ + wcd_clsh_buck_ctrl(ctrl, CLS_H_NORMAL, false); + wcd_clsh_flyback_ctrl(ctrl, CLS_H_NORMAL, false); + wcd_clsh_set_flyback_mode(comp, CLS_H_NORMAL); + wcd_clsh_set_buck_mode(comp, CLS_H_NORMAL); + wcd_clsh_set_buck_regulator_mode(comp, CLS_H_NORMAL); + } +} + +static void wcd_clsh_state_ear(struct wcd_clsh_ctrl *ctrl, int req_state, + bool is_enable, int mode) +{ + struct snd_soc_component *comp = ctrl->comp; + + if (mode != CLS_H_NORMAL) { + dev_err(comp->dev, "%s: mode: %d cannot be used for EAR\n", + __func__, mode); + return; + } + + if (is_enable) { + wcd_enable_clsh_block(ctrl, true); + snd_soc_component_update_bits(comp, + WCD9XXX_A_CDC_RX0_RX_PATH_CFG0, + WCD9XXX_A_CDC_RX_PATH_CLSH_EN_MASK, + WCD9XXX_A_CDC_RX_PATH_CLSH_ENABLE); + wcd_clsh_set_buck_mode(comp, mode); + wcd_clsh_set_flyback_mode(comp, mode); + wcd_clsh_flyback_ctrl(ctrl, mode, true); + wcd_clsh_set_flyback_current(comp, mode); + wcd_clsh_buck_ctrl(ctrl, mode, true); + } else { + snd_soc_component_update_bits(comp, + WCD9XXX_A_CDC_RX0_RX_PATH_CFG0, + WCD9XXX_A_CDC_RX_PATH_CLSH_EN_MASK, + WCD9XXX_A_CDC_RX_PATH_CLSH_DISABLE); + wcd_enable_clsh_block(ctrl, false); + wcd_clsh_buck_ctrl(ctrl, mode, false); + wcd_clsh_flyback_ctrl(ctrl, mode, false); + wcd_clsh_set_flyback_mode(comp, CLS_H_NORMAL); + wcd_clsh_set_buck_mode(comp, CLS_H_NORMAL); + } +} + +static int _wcd_clsh_ctrl_set_state(struct wcd_clsh_ctrl *ctrl, int req_state, + bool is_enable, int mode) +{ + switch (req_state) { + case WCD_CLSH_STATE_EAR: + wcd_clsh_state_ear(ctrl, req_state, is_enable, mode); + break; + case WCD_CLSH_STATE_HPHL: + wcd_clsh_state_hph_l(ctrl, req_state, is_enable, mode); + break; + case WCD_CLSH_STATE_HPHR: + wcd_clsh_state_hph_r(ctrl, req_state, is_enable, mode); + break; + break; + case WCD_CLSH_STATE_LO: + wcd_clsh_state_lo(ctrl, req_state, is_enable, mode); + break; + default: + break; + } + + return 0; +} + +/* + * Function: wcd_clsh_is_state_valid + * Params: state + * Description: + * Provides information on valid states of Class H configuration + */ +static bool wcd_clsh_is_state_valid(int state) +{ + switch (state) { + case WCD_CLSH_STATE_IDLE: + case WCD_CLSH_STATE_EAR: + case WCD_CLSH_STATE_HPHL: + case WCD_CLSH_STATE_HPHR: + case WCD_CLSH_STATE_LO: + return true; + default: + return false; + }; +} + +/* + * Function: wcd_clsh_fsm + * Params: ctrl, req_state, req_type, clsh_event + * Description: + * This function handles PRE DAC and POST DAC conditions of different devices + * and updates class H configuration of different combination of devices + * based on validity of their states. ctrl will contain current + * class h state information + */ +int wcd_clsh_ctrl_set_state(struct wcd_clsh_ctrl *ctrl, + enum wcd_clsh_event clsh_event, + int nstate, + enum wcd_clsh_mode mode) +{ + struct snd_soc_component *comp = ctrl->comp; + + if (nstate == ctrl->state) + return 0; + + if (!wcd_clsh_is_state_valid(nstate)) { + dev_err(comp->dev, "Class-H not a valid new state:\n"); + return -EINVAL; + } + + switch (clsh_event) { + case WCD_CLSH_EVENT_PRE_DAC: + _wcd_clsh_ctrl_set_state(ctrl, nstate, CLSH_REQ_ENABLE, mode); + break; + case WCD_CLSH_EVENT_POST_PA: + _wcd_clsh_ctrl_set_state(ctrl, nstate, CLSH_REQ_DISABLE, mode); + break; + }; + + ctrl->state = nstate; + ctrl->mode = mode; + + return 0; +} + +int wcd_clsh_ctrl_get_state(struct wcd_clsh_ctrl *ctrl) +{ + return ctrl->state; +} + +struct wcd_clsh_ctrl *wcd_clsh_ctrl_alloc(struct snd_soc_component *comp, + int version) +{ + struct wcd_clsh_ctrl *ctrl; + + ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL); + if (!ctrl) + return ERR_PTR(-ENOMEM); + + ctrl->state = WCD_CLSH_STATE_IDLE; + ctrl->comp = comp; + + return ctrl; +} + +void wcd_clsh_ctrl_free(struct wcd_clsh_ctrl *ctrl) +{ + kfree(ctrl); +} diff --git a/sound/soc/codecs/wcd-clsh.h b/sound/soc/codecs/wcd-clsh.h new file mode 100644 index 000000000000..a902f9893467 --- /dev/null +++ b/sound/soc/codecs/wcd-clsh.h @@ -0,0 +1,49 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef _WCD_CLSH_V2_H_ +#define _WCD_CLSH_V2_H_ +#include + +enum wcd_clsh_event { + WCD_CLSH_EVENT_PRE_DAC = 1, + WCD_CLSH_EVENT_POST_PA, +}; + +/* + * Basic states for Class H state machine. + * represented as a bit mask within a u8 data type + * bit 0: EAR mode + * bit 1: HPH Left mode + * bit 2: HPH Right mode + * bit 3: Lineout mode + */ +#define WCD_CLSH_STATE_IDLE 0 +#define WCD_CLSH_STATE_EAR BIT(0) +#define WCD_CLSH_STATE_HPHL BIT(1) +#define WCD_CLSH_STATE_HPHR BIT(2) +#define WCD_CLSH_STATE_LO BIT(3) +#define WCD_CLSH_STATE_MAX 4 +#define NUM_CLSH_STATES_V2 BIT(WCD_CLSH_STATE_MAX) + +enum wcd_clsh_mode { + CLS_H_NORMAL = 0, /* Class-H Default */ + CLS_H_HIFI, /* Class-H HiFi */ + CLS_H_LP, /* Class-H Low Power */ + CLS_AB, /* Class-AB */ + CLS_H_LOHIFI, /* LoHIFI */ + CLS_NONE, /* None of the above modes */ +}; + +struct wcd_clsh_ctrl; + +extern struct wcd_clsh_ctrl *wcd_clsh_ctrl_alloc( + struct snd_soc_component *component, + int version); +extern void wcd_clsh_ctrl_free(struct wcd_clsh_ctrl *ctrl); +extern int wcd_clsh_ctrl_get_state(struct wcd_clsh_ctrl *ctrl); +extern int wcd_clsh_ctrl_set_state(struct wcd_clsh_ctrl *ctrl, + enum wcd_clsh_event event, + int state, + enum wcd_clsh_mode mode); + +#endif /* _WCD_CLSH_V2_H_ */ diff --git a/sound/soc/codecs/wcd9335.c b/sound/soc/codecs/wcd9335.c index bd9de5d45fa9..06c73699f16f 100644 --- a/sound/soc/codecs/wcd9335.c +++ b/sound/soc/codecs/wcd9335.c @@ -21,6 +21,7 @@ #include #include #include +#include "wcd-clsh.h" #define WCD9335_RATES_MASK (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |\ SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_48000 |\ @@ -181,6 +182,7 @@ struct wcd9335_codec { int sido_ccl_cnt; enum wcd_clock_type clk_type; + struct wcd_clsh_ctrl *clsh_ctrl; u32 hph_mode; }; @@ -1066,6 +1068,13 @@ static int wcd9335_codec_probe(struct snd_soc_component *component) int i; snd_soc_component_init_regmap(component, wcd->regmap); + /* Class-H Init*/ + wcd->clsh_ctrl = wcd_clsh_ctrl_alloc(component, wcd->version); + if (IS_ERR(wcd->clsh_ctrl)) + return PTR_ERR(wcd->clsh_ctrl); + + /* Default HPH Mode to Class-H HiFi */ + wcd->hph_mode = CLS_H_HIFI; wcd->component = component; wcd9335_codec_init(component); @@ -1080,6 +1089,7 @@ static void wcd9335_codec_remove(struct snd_soc_component *comp) { struct wcd9335_codec *wcd = dev_get_drvdata(comp->dev); + wcd_clsh_ctrl_free(wcd->clsh_ctrl); free_irq(regmap_irq_get_virq(wcd->irq_data, WCD9335_IRQ_SLIMBUS), wcd); } -- cgit v1.2.3 From 6751e7c66cb8689491b89fe02c71d1d44394412b Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Tue, 31 Jul 2018 19:19:50 +0200 Subject: net: dsa: mv88e6xxx: Fix SERDES support on 88E6141/6341 Version 1 of the patch adding SERDES support to the 88E6141/6341 correctly added the ops to the 88E6141/6341. However, by the time version 3 was committed, the ops had moved to the 88E6085/6175. Put them back where they belong. Fixes: 5bafeb6e7e87 ("net: dsa: mv88e6xxx: 88E6141/6341 SERDES support") Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx/chip.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index 9ef07a06aceb..bb28c701381a 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -2617,7 +2617,6 @@ static const struct mv88e6xxx_ops mv88e6085_ops = { .rmu_disable = mv88e6085_g1_rmu_disable, .vtu_getnext = mv88e6352_g1_vtu_getnext, .vtu_loadpurge = mv88e6352_g1_vtu_loadpurge, - .serdes_power = mv88e6341_serdes_power, }; static const struct mv88e6xxx_ops mv88e6095_ops = { @@ -2783,6 +2782,7 @@ static const struct mv88e6xxx_ops mv88e6141_ops = { .reset = mv88e6352_g1_reset, .vtu_getnext = mv88e6352_g1_vtu_getnext, .vtu_loadpurge = mv88e6352_g1_vtu_loadpurge, + .serdes_power = mv88e6341_serdes_power, .gpio_ops = &mv88e6352_gpio_ops, }; @@ -2960,7 +2960,6 @@ static const struct mv88e6xxx_ops mv88e6175_ops = { .reset = mv88e6352_g1_reset, .vtu_getnext = mv88e6352_g1_vtu_getnext, .vtu_loadpurge = mv88e6352_g1_vtu_loadpurge, - .serdes_power = mv88e6341_serdes_power, }; static const struct mv88e6xxx_ops mv88e6176_ops = { @@ -3336,6 +3335,7 @@ static const struct mv88e6xxx_ops mv88e6341_ops = { .reset = mv88e6352_g1_reset, .vtu_getnext = mv88e6352_g1_vtu_getnext, .vtu_loadpurge = mv88e6352_g1_vtu_loadpurge, + .serdes_power = mv88e6341_serdes_power, .gpio_ops = &mv88e6352_gpio_ops, .avb_ops = &mv88e6390_avb_ops, }; -- cgit v1.2.3 From 5f5991f36dce1e69dd8bd7495763eec2e28f08e7 Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Mon, 16 Jul 2018 11:49:27 +0300 Subject: net/mlx5e: E-Switch, Initialize eswitch only if eswitch manager Execute mlx5_eswitch_init() only if we have MLX5_ESWITCH_MANAGER capabilities. Do the same for mlx5_eswitch_cleanup(). Fixes: a9f7705ffd66 ("net/mlx5: Unify vport manager capability check") Signed-off-by: Eli Cohen Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/eswitch.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c index dd01ad4c0b54..40dba9e8af92 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c @@ -1696,7 +1696,7 @@ int mlx5_eswitch_init(struct mlx5_core_dev *dev) int vport_num; int err; - if (!MLX5_VPORT_MANAGER(dev)) + if (!MLX5_ESWITCH_MANAGER(dev)) return 0; esw_info(dev, @@ -1765,7 +1765,7 @@ abort: void mlx5_eswitch_cleanup(struct mlx5_eswitch *esw) { - if (!esw || !MLX5_VPORT_MANAGER(esw->dev)) + if (!esw || !MLX5_ESWITCH_MANAGER(esw->dev)) return; esw_info(esw->dev, "cleanup\n"); -- cgit v1.2.3 From 2e8e70d249e8c5c79bf88bbb36bb68154ab15471 Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Thu, 19 Jul 2018 16:17:00 +0000 Subject: net/mlx5e: Set port trust mode to PCP as default The hairpin offload code has dependency on the trust mode being PCP. Hence we should set PCP as the default for handling cases where we are disallowed to read the trust mode from the FW, or failed to initialize it. Fixes: 106be53b6b0a ('net/mlx5e: Set per priority hairpin pairs') Signed-off-by: Or Gerlitz Reviewed-by: Parav Pandit Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c index 86bc9ac99586..e33afa8d2417 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c @@ -1172,6 +1172,8 @@ static int mlx5e_trust_initialize(struct mlx5e_priv *priv) struct mlx5_core_dev *mdev = priv->mdev; int err; + priv->dcbx_dp.trust_state = MLX5_QPTS_TRUST_PCP; + if (!MLX5_DSCP_SUPPORTED(mdev)) return 0; -- cgit v1.2.3 From eacecf2760e321bf1c99b981d44a14bd05721f15 Mon Sep 17 00:00:00 2001 From: Adi Nissim Date: Tue, 5 Jun 2018 11:32:11 +0300 Subject: net/mlx5e: Fix null pointer access when setting MTU of vport representor MTU helper function is used by both conventional mlx5e instances (PF/VF) and the eswitch representors. The representor shouldn't change the nic vport context MTU, the VF is responsible for that. Therefore set_mtu_cb has a null value when changing the representor MTU. Fixes: 250a42b6a764 ("net/mlx5e: Support configurable MTU for vport representors") Signed-off-by: Adi Nissim Reviewed-by: Yevgeny Kliteynik Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index dae4156a710d..c592678ab5f1 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -3712,7 +3712,8 @@ int mlx5e_change_mtu(struct net_device *netdev, int new_mtu, if (!reset) { params->sw_mtu = new_mtu; - set_mtu_cb(priv); + if (set_mtu_cb) + set_mtu_cb(priv); netdev->mtu = params->sw_mtu; goto out; } -- cgit v1.2.3 From 8e1d162d8e81838119de18b4ca1e302ce906f2a6 Mon Sep 17 00:00:00 2001 From: Feras Daoud Date: Sun, 15 Jul 2018 13:59:36 +0300 Subject: net/mlx5e: IPoIB, Set the netdevice sw mtu in ipoib enhanced flow After introduction of the cited commit, mlx5e_build_nic_params receives the netdevice mtu in order to set the sw_mtu of mlx5e_params. For enhanced IPoIB, the netdevice mtu is not set in this stage, therefore, the initial sw_mtu equals zero. As a result, the hw_mtu of the receive queue will be calculated incorrectly causing traffic issues. To fix this issue, query for port mtu before building the nic params. Fixes: 472a1e44b349 ("net/mlx5e: Save MTU in channels params") Signed-off-by: Feras Daoud Reviewed-by: Tariq Toukan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c index af3bb2f7a504..b7c21eb21a21 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c @@ -76,6 +76,7 @@ void mlx5i_init(struct mlx5_core_dev *mdev, void *ppriv) { struct mlx5e_priv *priv = mlx5i_epriv(netdev); + u16 max_mtu; /* priv init */ priv->mdev = mdev; @@ -84,6 +85,9 @@ void mlx5i_init(struct mlx5_core_dev *mdev, priv->ppriv = ppriv; mutex_init(&priv->state_lock); + mlx5_query_port_max_mtu(mdev, &max_mtu, 1); + netdev->mtu = max_mtu; + mlx5e_build_nic_params(mdev, &priv->channels.params, profile->max_nch(mdev), netdev->mtu); mlx5i_build_nic_params(mdev, &priv->channels.params); -- cgit v1.2.3 From 80d20d35af1edd632a5e7a3b9c0ab7ceff92769e Mon Sep 17 00:00:00 2001 From: Anna-Maria Gleixner Date: Tue, 31 Jul 2018 18:13:58 +0200 Subject: nohz: Fix local_timer_softirq_pending() local_timer_softirq_pending() checks whether the timer softirq is pending with: local_softirq_pending() & TIMER_SOFTIRQ. This is wrong because TIMER_SOFTIRQ is the softirq number and not a bitmask. So the test checks for the wrong bit. Use BIT(TIMER_SOFTIRQ) instead. Fixes: 5d62c183f9e9 ("nohz: Prevent a timer interrupt storm in tick_nohz_stop_sched_tick()") Signed-off-by: Anna-Maria Gleixner Signed-off-by: Thomas Gleixner Reviewed-by: Paul E. McKenney Reviewed-by: Daniel Bristot de Oliveira Acked-by: Frederic Weisbecker Cc: bigeasy@linutronix.de Cc: peterz@infradead.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180731161358.29472-1-anna-maria@linutronix.de --- kernel/time/tick-sched.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index da9455a6b42b..5b33e2f5c0ed 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -642,7 +642,7 @@ static void tick_nohz_restart(struct tick_sched *ts, ktime_t now) static inline bool local_timer_softirq_pending(void) { - return local_softirq_pending() & TIMER_SOFTIRQ; + return local_softirq_pending() & BIT(TIMER_SOFTIRQ); } static ktime_t tick_nohz_next_event(struct tick_sched *ts, int cpu) -- cgit v1.2.3 From 56e2c94f055d328f5f6b0a5c1721cca2f2d4e0a1 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 30 Jul 2018 20:09:11 -0700 Subject: inet: frag: enforce memory limits earlier We currently check current frags memory usage only when a new frag queue is created. This allows attackers to first consume the memory budget (default : 4 MB) creating thousands of frag queues, then sending tiny skbs to exceed high_thresh limit by 2 to 3 order of magnitude. Note that before commit 648700f76b03 ("inet: frags: use rhashtables for reassembly units"), work queue could be starved under DOS, getting no cpu cycles. After commit 648700f76b03, only the per frag queue timer can eventually remove an incomplete frag queue and its skbs. Fixes: b13d3cbfb8e8 ("inet: frag: move eviction of queues to work queue") Signed-off-by: Eric Dumazet Reported-by: Jann Horn Cc: Florian Westphal Cc: Peter Oskolkov Cc: Paolo Abeni Acked-by: Florian Westphal Signed-off-by: David S. Miller --- net/ipv4/inet_fragment.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/ipv4/inet_fragment.c b/net/ipv4/inet_fragment.c index 1e4cf3ab560f..0d70608cc2e1 100644 --- a/net/ipv4/inet_fragment.c +++ b/net/ipv4/inet_fragment.c @@ -157,9 +157,6 @@ static struct inet_frag_queue *inet_frag_alloc(struct netns_frags *nf, { struct inet_frag_queue *q; - if (!nf->high_thresh || frag_mem_limit(nf) > nf->high_thresh) - return NULL; - q = kmem_cache_zalloc(f->frags_cachep, GFP_ATOMIC); if (!q) return NULL; @@ -204,6 +201,9 @@ struct inet_frag_queue *inet_frag_find(struct netns_frags *nf, void *key) { struct inet_frag_queue *fq; + if (!nf->high_thresh || frag_mem_limit(nf) > nf->high_thresh) + return NULL; + rcu_read_lock(); fq = rhashtable_lookup(&nf->rhashtable, key, nf->f->rhash_params); -- cgit v1.2.3 From 4672694bd4f1aebdab0ad763ae4716e89cb15221 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 30 Jul 2018 21:50:29 -0700 Subject: ipv4: frags: handle possible skb truesize change ip_frag_queue() might call pskb_pull() on one skb that is already in the fragment queue. We need to take care of possible truesize change, or we might have an imbalance of the netns frags memory usage. IPv6 is immune to this bug, because RFC5722, Section 4, amended by Errata ID 3089 states : When reassembling an IPv6 datagram, if one or more its constituent fragments is determined to be an overlapping fragment, the entire datagram (and any constituent fragments) MUST be silently discarded. Fixes: 158f323b9868 ("net: adjust skb->truesize in pskb_expand_head()") Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/ip_fragment.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/net/ipv4/ip_fragment.c b/net/ipv4/ip_fragment.c index 8e9528ebaa8e..d14d741fb05e 100644 --- a/net/ipv4/ip_fragment.c +++ b/net/ipv4/ip_fragment.c @@ -383,11 +383,16 @@ found: int i = end - next->ip_defrag_offset; /* overlap is 'i' bytes */ if (i < next->len) { + int delta = -next->truesize; + /* Eat head of the next overlapped fragment * and leave the loop. The next ones cannot overlap. */ if (!pskb_pull(next, i)) goto err; + delta += next->truesize; + if (delta) + add_frag_mem_limit(qp->q.net, delta); next->ip_defrag_offset += i; qp->q.meat -= i; if (next->ip_summed != CHECKSUM_UNNECESSARY) -- cgit v1.2.3 From cb5c6568867325f9905e80c96531d963bec8e5ea Mon Sep 17 00:00:00 2001 From: Govindarajulu Varadarajan Date: Mon, 30 Jul 2018 09:56:54 -0700 Subject: enic: do not call enic_change_mtu in enic_probe In commit ab123fe071c9 ("enic: handle mtu change for vf properly") ASSERT_RTNL() is added to _enic_change_mtu() to prevent it from being called without rtnl held. enic_probe() calls enic_change_mtu() without rtnl held. At this point netdev is not registered yet. Remove call to enic_change_mtu and assign the mtu to netdev->mtu. Fixes: ab123fe071c9 ("enic: handle mtu change for vf properly") Signed-off-by: Govindarajulu Varadarajan Signed-off-by: David S. Miller --- drivers/net/ethernet/cisco/enic/enic_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/cisco/enic/enic_main.c b/drivers/net/ethernet/cisco/enic/enic_main.c index 6b0376123cde..60641e202534 100644 --- a/drivers/net/ethernet/cisco/enic/enic_main.c +++ b/drivers/net/ethernet/cisco/enic/enic_main.c @@ -2892,7 +2892,6 @@ static int enic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) */ enic->port_mtu = enic->config.mtu; - (void)enic_change_mtu(netdev, enic->port_mtu); err = enic_set_mac_addr(netdev, enic->mac_addr); if (err) { @@ -2982,6 +2981,7 @@ static int enic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* MTU range: 68 - 9000 */ netdev->min_mtu = ENIC_MIN_MTU; netdev->max_mtu = ENIC_MAX_MTU; + netdev->mtu = enic->port_mtu; err = register_netdev(netdev); if (err) { -- cgit v1.2.3 From 00bc22e3eea0346b594442331df53d0d1e7104dd Mon Sep 17 00:00:00 2001 From: Rohit kumar Date: Wed, 1 Aug 2018 14:31:06 +0530 Subject: ASoC: qcom: dt-bindings: Add sdm845 machine bindings Add devicetree bindings documentation file for SDM845 sound card. Reviewed-by: Rob Herring Signed-off-by: Rohit kumar Signed-off-by: Mark Brown --- .../devicetree/bindings/sound/qcom,sdm845.txt | 80 ++++++++++++++++++++++ 1 file changed, 80 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/qcom,sdm845.txt diff --git a/Documentation/devicetree/bindings/sound/qcom,sdm845.txt b/Documentation/devicetree/bindings/sound/qcom,sdm845.txt new file mode 100644 index 000000000000..408c4837e6d5 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,sdm845.txt @@ -0,0 +1,80 @@ +* Qualcomm Technologies Inc. SDM845 ASoC sound card driver + +This binding describes the SDM845 sound card, which uses qdsp for audio. + +- compatible: + Usage: required + Value type: + Definition: must be "qcom,sdm845-sndcard" + +- audio-routing: + Usage: Optional + Value type: + Definition: A list of the connections between audio components. + Each entry is a pair of strings, the first being the + connection's sink, the second being the connection's + source. Valid names could be power supplies, MicBias + of codec and the jacks on the board. + +- model: + Usage: required + Value type: + Definition: The user-visible name of this sound card. + += dailinks +Each subnode of sndcard represents either a dailink, and subnodes of each +dailinks would be cpu/codec/platform dais. + +- link-name: + Usage: required + Value type: + Definition: User friendly name for dai link + += CPU, PLATFORM, CODEC dais subnodes +- cpu: + Usage: required + Value type: + Definition: cpu dai sub-node + +- codec: + Usage: required + Value type: + Definition: codec dai sub-node + +- platform: + Usage: Optional + Value type: + Definition: platform dai sub-node + +- sound-dai: + Usage: required + Value type: + Definition: dai phandle/s and port of CPU/CODEC/PLATFORM node. + +Example: + +audio { + compatible = "qcom,sdm845-sndcard"; + model = "sdm845-snd-card"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pri_mi2s_active &pri_mi2s_ws_active>; + pinctrl-1 = <&pri_mi2s_sleep &pri_mi2s_ws_sleep>; + + mm1-dai-link { + link-name = "MultiMedia1"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + pri-mi2s-dai-link { + link-name = "PRI MI2S Playback"; + cpu { + sound-dai = <&q6afedai PRIMARY_MI2S_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + }; +}; -- cgit v1.2.3 From 0c901e8cea15ba1e318d8f4342f7dc27a80b5978 Mon Sep 17 00:00:00 2001 From: Rohit kumar Date: Wed, 1 Aug 2018 14:31:07 +0530 Subject: ASoC: dt-bindings: Update dt binding name for apq8096 Remove qcom prefix from machine driver dt bindings of apq8096 SoC. Acked-by: Srinivas Kandagatla Reviewed-by: Rob Herring Signed-off-by: Rohit kumar Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/sound/qcom,apq8096.txt | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/qcom,apq8096.txt b/Documentation/devicetree/bindings/sound/qcom,apq8096.txt index aa54e49fc8a2..20bc034f6c01 100644 --- a/Documentation/devicetree/bindings/sound/qcom,apq8096.txt +++ b/Documentation/devicetree/bindings/sound/qcom,apq8096.txt @@ -7,7 +7,7 @@ This binding describes the APQ8096 sound card, which uses qdsp for audio. Value type: Definition: must be "qcom,apq8096-sndcard" -- qcom,audio-routing: +- audio-routing: Usage: Optional Value type: Definition: A list of the connections between audio components. @@ -49,6 +49,12 @@ This binding describes the APQ8096 sound card, which uses qdsp for audio. "DMIC1" "DMIC2" "DMIC3" + +- model: + Usage: required + Value type: + Definition: The user-visible name of this sound card. + = dailinks Each subnode of sndcard represents either a dailink, and subnodes of each dailinks would be cpu/codec/platform dais. @@ -79,11 +85,16 @@ dailinks would be cpu/codec/platform dais. Value type: Definition: dai phandle/s and port of CPU/CODEC/PLATFORM node. +Obsolete: + qcom,model: String for soundcard name (Use model instead) + qcom,audio-routing: A list of the connections between audio components. + (Use audio-routing instead) + Example: audio { compatible = "qcom,apq8096-sndcard"; - qcom,model = "DB820c"; + model = "DB820c"; mm1-dai-link { link-name = "MultiMedia1"; -- cgit v1.2.3 From c25e295cd77b37903ddc9ee27384e17aad08f27c Mon Sep 17 00:00:00 2001 From: Rohit kumar Date: Wed, 1 Aug 2018 14:31:08 +0530 Subject: ASoC: qcom: Add support to parse common audio device nodes This adds support to parse cpu, platform and codec device nodes and add them in dai-links. Also, update apq8096 machine driver to use the common API. Acked-by: Srinivas Kandagatla Signed-off-by: Rohit kumar Signed-off-by: Mark Brown --- sound/soc/qcom/Makefile | 2 +- sound/soc/qcom/apq8096.c | 111 +++++----------------------------------------- sound/soc/qcom/common.c | 112 +++++++++++++++++++++++++++++++++++++++++++++++ sound/soc/qcom/common.h | 12 +++++ 4 files changed, 136 insertions(+), 101 deletions(-) create mode 100644 sound/soc/qcom/common.c create mode 100644 sound/soc/qcom/common.h diff --git a/sound/soc/qcom/Makefile b/sound/soc/qcom/Makefile index 206945bb9ba1..fefecc072265 100644 --- a/sound/soc/qcom/Makefile +++ b/sound/soc/qcom/Makefile @@ -13,7 +13,7 @@ obj-$(CONFIG_SND_SOC_LPASS_APQ8016) += snd-soc-lpass-apq8016.o # Machine snd-soc-storm-objs := storm.o snd-soc-apq8016-sbc-objs := apq8016_sbc.o -snd-soc-apq8096-objs := apq8096.o +snd-soc-apq8096-objs := apq8096.o common.o obj-$(CONFIG_SND_SOC_STORM) += snd-soc-storm.o obj-$(CONFIG_SND_SOC_APQ8016_SBC) += snd-soc-apq8016-sbc.o diff --git a/sound/soc/qcom/apq8096.c b/sound/soc/qcom/apq8096.c index a56156281c8d..1e4a90d59228 100644 --- a/sound/soc/qcom/apq8096.c +++ b/sound/soc/qcom/apq8096.c @@ -9,6 +9,7 @@ #include #include #include +#include "common.h" static int apq8096_be_hw_params_fixup(struct snd_soc_pcm_runtime *rtd, struct snd_pcm_hw_params *params) @@ -24,109 +25,16 @@ static int apq8096_be_hw_params_fixup(struct snd_soc_pcm_runtime *rtd, return 0; } -static int apq8096_sbc_parse_of(struct snd_soc_card *card) +static void apq8096_add_be_ops(struct snd_soc_card *card) { - struct device_node *np; - struct device_node *codec = NULL; - struct device_node *platform = NULL; - struct device_node *cpu = NULL; - struct device *dev = card->dev; - struct snd_soc_dai_link *link; - int ret, num_links; - - ret = snd_soc_of_parse_card_name(card, "qcom,model"); - if (ret) { - dev_err(dev, "Error parsing card name: %d\n", ret); - return ret; - } - - /* DAPM routes */ - if (of_property_read_bool(dev->of_node, "qcom,audio-routing")) { - ret = snd_soc_of_parse_audio_routing(card, - "qcom,audio-routing"); - if (ret) - return ret; - } - - /* Populate links */ - num_links = of_get_child_count(dev->of_node); - - /* Allocate the DAI link array */ - card->dai_link = kcalloc(num_links, sizeof(*link), GFP_KERNEL); - if (!card->dai_link) - return -ENOMEM; + struct snd_soc_dai_link *link = card->dai_link; + int i, num_links = card->num_links; - card->num_links = num_links; - link = card->dai_link; - - for_each_child_of_node(dev->of_node, np) { - cpu = of_get_child_by_name(np, "cpu"); - if (!cpu) { - dev_err(dev, "Can't find cpu DT node\n"); - ret = -EINVAL; - goto err; - } - - link->cpu_of_node = of_parse_phandle(cpu, "sound-dai", 0); - if (!link->cpu_of_node) { - dev_err(card->dev, "error getting cpu phandle\n"); - ret = -EINVAL; - goto err; - } - - ret = snd_soc_of_get_dai_name(cpu, &link->cpu_dai_name); - if (ret) { - dev_err(card->dev, "error getting cpu dai name\n"); - goto err; - } - - platform = of_get_child_by_name(np, "platform"); - codec = of_get_child_by_name(np, "codec"); - if (codec && platform) { - link->platform_of_node = of_parse_phandle(platform, - "sound-dai", - 0); - if (!link->platform_of_node) { - dev_err(card->dev, "platform dai not found\n"); - ret = -EINVAL; - goto err; - } - - ret = snd_soc_of_get_dai_link_codecs(dev, codec, link); - if (ret < 0) { - dev_err(card->dev, "codec dai not found\n"); - goto err; - } - link->no_pcm = 1; - link->ignore_pmdown_time = 1; + for (i = 0; i < num_links; i++) { + if (link->no_pcm == 1) link->be_hw_params_fixup = apq8096_be_hw_params_fixup; - } else { - link->platform_of_node = link->cpu_of_node; - link->codec_dai_name = "snd-soc-dummy-dai"; - link->codec_name = "snd-soc-dummy"; - link->dynamic = 1; - } - - link->ignore_suspend = 1; - ret = of_property_read_string(np, "link-name", &link->name); - if (ret) { - dev_err(card->dev, "error getting codec dai_link name\n"); - goto err; - } - - link->dpcm_playback = 1; - link->dpcm_capture = 1; - link->stream_name = link->name; link++; } - - return 0; -err: - of_node_put(cpu); - of_node_put(codec); - of_node_put(platform); - kfree(card->dai_link); - return ret; } static int apq8096_platform_probe(struct platform_device *pdev) @@ -142,18 +50,21 @@ static int apq8096_platform_probe(struct platform_device *pdev) card->dev = dev; card->auto_bind = true; dev_set_drvdata(dev, card); - ret = apq8096_sbc_parse_of(card); + ret = qcom_snd_parse_of(card); if (ret) { dev_err(dev, "Error parsing OF data\n"); goto err; } + apq8096_add_be_ops(card); ret = snd_soc_register_card(card); if (ret) - goto err; + goto err_card_register; return 0; +err_card_register: + kfree(card->dai_link); err: kfree(card); return ret; diff --git a/sound/soc/qcom/common.c b/sound/soc/qcom/common.c new file mode 100644 index 000000000000..eb1b9da05dd4 --- /dev/null +++ b/sound/soc/qcom/common.c @@ -0,0 +1,112 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018, Linaro Limited. +// Copyright (c) 2018, The Linux Foundation. All rights reserved. + +#include +#include "common.h" + +int qcom_snd_parse_of(struct snd_soc_card *card) +{ + struct device_node *np; + struct device_node *codec = NULL; + struct device_node *platform = NULL; + struct device_node *cpu = NULL; + struct device *dev = card->dev; + struct snd_soc_dai_link *link; + int ret, num_links; + + ret = snd_soc_of_parse_card_name(card, "model"); + if (ret) { + dev_err(dev, "Error parsing card name: %d\n", ret); + return ret; + } + + /* DAPM routes */ + if (of_property_read_bool(dev->of_node, "audio-routing")) { + ret = snd_soc_of_parse_audio_routing(card, + "audio-routing"); + if (ret) + return ret; + } + + /* Populate links */ + num_links = of_get_child_count(dev->of_node); + + /* Allocate the DAI link array */ + card->dai_link = kcalloc(num_links, sizeof(*link), GFP_KERNEL); + if (!card->dai_link) + return -ENOMEM; + + card->num_links = num_links; + link = card->dai_link; + for_each_child_of_node(dev->of_node, np) { + cpu = of_get_child_by_name(np, "cpu"); + if (!cpu) { + dev_err(dev, "Can't find cpu DT node\n"); + ret = -EINVAL; + goto err; + } + + link->cpu_of_node = of_parse_phandle(cpu, "sound-dai", 0); + if (!link->cpu_of_node) { + dev_err(card->dev, "error getting cpu phandle\n"); + ret = -EINVAL; + goto err; + } + + ret = snd_soc_of_get_dai_name(cpu, &link->cpu_dai_name); + if (ret) { + dev_err(card->dev, "error getting cpu dai name\n"); + goto err; + } + + platform = of_get_child_by_name(np, "platform"); + codec = of_get_child_by_name(np, "codec"); + if (codec && platform) { + link->platform_of_node = of_parse_phandle(platform, + "sound-dai", + 0); + if (!link->platform_of_node) { + dev_err(card->dev, "platform dai not found\n"); + ret = -EINVAL; + goto err; + } + + ret = snd_soc_of_get_dai_link_codecs(dev, codec, link); + if (ret < 0) { + dev_err(card->dev, "codec dai not found\n"); + goto err; + } + link->no_pcm = 1; + link->ignore_pmdown_time = 1; + } else { + link->platform_of_node = link->cpu_of_node; + link->codec_dai_name = "snd-soc-dummy-dai"; + link->codec_name = "snd-soc-dummy"; + link->dynamic = 1; + } + + link->ignore_suspend = 1; + ret = of_property_read_string(np, "link-name", &link->name); + if (ret) { + dev_err(card->dev, "error getting codec dai_link name\n"); + goto err; + } + + link->dpcm_playback = 1; + link->dpcm_capture = 1; + link->stream_name = link->name; + link++; + } + + return 0; +err: + of_node_put(cpu); + of_node_put(codec); + of_node_put(platform); + kfree(card->dai_link); + return ret; +} +EXPORT_SYMBOL(qcom_snd_parse_of); + +MODULE_LICENSE("GPL v2"); diff --git a/sound/soc/qcom/common.h b/sound/soc/qcom/common.h new file mode 100644 index 000000000000..ad5d2cf27459 --- /dev/null +++ b/sound/soc/qcom/common.h @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +// Copyright (c) 2018, The Linux Foundation. All rights reserved. + +#ifndef __QCOM_SND_COMMON_H__ +#define __QCOM_SND_COMMON_H__ + +#include +#include + +int qcom_snd_parse_of(struct snd_soc_card *card); + +#endif -- cgit v1.2.3 From 6b1687bf76ef84cb1e31386c4871a01fe66937bf Mon Sep 17 00:00:00 2001 From: Rohit kumar Date: Wed, 1 Aug 2018 14:31:09 +0530 Subject: ASoC: qcom: add sdm845 sound card support This patch adds sdm845 audio machine driver support. Acked-by: Srinivas Kandagatla Signed-off-by: Rohit kumar Signed-off-by: Mark Brown --- sound/soc/qcom/Kconfig | 8 ++ sound/soc/qcom/Makefile | 2 + sound/soc/qcom/sdm845.c | 286 ++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 296 insertions(+) create mode 100644 sound/soc/qcom/sdm845.c diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig index 87838fa27997..350730839c6f 100644 --- a/sound/soc/qcom/Kconfig +++ b/sound/soc/qcom/Kconfig @@ -90,3 +90,11 @@ config SND_SOC_MSM8996 Support for Qualcomm Technologies LPASS audio block in APQ8096 SoC-based systems. Say Y if you want to use audio device on this SoCs + +config SND_SOC_SDM845 + tristate "SoC Machine driver for SDM845 boards" + select SND_SOC_QDSP6 + help + To add support for audio on Qualcomm Technologies Inc. + SDM845 SoC-based systems. + Say Y if you want to use audio device on this SoCs. diff --git a/sound/soc/qcom/Makefile b/sound/soc/qcom/Makefile index fefecc072265..f0e94d48ba98 100644 --- a/sound/soc/qcom/Makefile +++ b/sound/soc/qcom/Makefile @@ -14,10 +14,12 @@ obj-$(CONFIG_SND_SOC_LPASS_APQ8016) += snd-soc-lpass-apq8016.o snd-soc-storm-objs := storm.o snd-soc-apq8016-sbc-objs := apq8016_sbc.o snd-soc-apq8096-objs := apq8096.o common.o +snd-soc-sdm845-objs := sdm845.o common.o obj-$(CONFIG_SND_SOC_STORM) += snd-soc-storm.o obj-$(CONFIG_SND_SOC_APQ8016_SBC) += snd-soc-apq8016-sbc.o obj-$(CONFIG_SND_SOC_MSM8996) += snd-soc-apq8096.o +obj-$(CONFIG_SND_SOC_SDM845) += snd-soc-sdm845.o #DSP lib obj-$(CONFIG_SND_SOC_QDSP6) += qdsp6/ diff --git a/sound/soc/qcom/sdm845.c b/sound/soc/qcom/sdm845.c new file mode 100644 index 000000000000..bf4ec4646906 --- /dev/null +++ b/sound/soc/qcom/sdm845.c @@ -0,0 +1,286 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2018, The Linux Foundation. All rights reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "qdsp6/q6afe.h" + +#define DEFAULT_SAMPLE_RATE_48K 48000 +#define DEFAULT_MCLK_RATE 24576000 +#define DEFAULT_BCLK_RATE 12288000 + +struct sdm845_snd_data { + struct snd_soc_card *card; + uint32_t pri_mi2s_clk_count; + uint32_t quat_tdm_clk_count; +}; + +static unsigned int tdm_slot_offset[8] = {0, 4, 8, 12, 16, 20, 24, 28}; + +static int sdm845_tdm_snd_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *cpu_dai = rtd->cpu_dai; + int ret = 0; + int channels, slot_width; + + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + slot_width = 32; + break; + default: + dev_err(rtd->dev, "%s: invalid param format 0x%x\n", + __func__, params_format(params)); + return -EINVAL; + } + + channels = params_channels(params); + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + ret = snd_soc_dai_set_tdm_slot(cpu_dai, 0, 0x3, + 8, slot_width); + if (ret < 0) { + dev_err(rtd->dev, "%s: failed to set tdm slot, err:%d\n", + __func__, ret); + goto end; + } + + ret = snd_soc_dai_set_channel_map(cpu_dai, 0, NULL, + channels, tdm_slot_offset); + if (ret < 0) { + dev_err(rtd->dev, "%s: failed to set channel map, err:%d\n", + __func__, ret); + goto end; + } + } else { + ret = snd_soc_dai_set_tdm_slot(cpu_dai, 0xf, 0, + 8, slot_width); + if (ret < 0) { + dev_err(rtd->dev, "%s: failed to set tdm slot, err:%d\n", + __func__, ret); + goto end; + } + + ret = snd_soc_dai_set_channel_map(cpu_dai, channels, + tdm_slot_offset, 0, NULL); + if (ret < 0) { + dev_err(rtd->dev, "%s: failed to set channel map, err:%d\n", + __func__, ret); + goto end; + } + } +end: + return ret; +} + +static int sdm845_snd_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *cpu_dai = rtd->cpu_dai; + int ret = 0; + + switch (cpu_dai->id) { + case QUATERNARY_TDM_RX_0: + case QUATERNARY_TDM_TX_0: + ret = sdm845_tdm_snd_hw_params(substream, params); + break; + default: + pr_err("%s: invalid dai id 0x%x\n", __func__, cpu_dai->id); + break; + } + return ret; +} + +static int sdm845_snd_startup(struct snd_pcm_substream *substream) +{ + unsigned int fmt = SND_SOC_DAIFMT_CBS_CFS; + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_card *card = rtd->card; + struct sdm845_snd_data *data = snd_soc_card_get_drvdata(card); + struct snd_soc_dai *cpu_dai = rtd->cpu_dai; + + switch (cpu_dai->id) { + case PRIMARY_MI2S_RX: + case PRIMARY_MI2S_TX: + if (++(data->pri_mi2s_clk_count) == 1) { + snd_soc_dai_set_sysclk(cpu_dai, + Q6AFE_LPASS_CLK_ID_MCLK_1, + DEFAULT_MCLK_RATE, SNDRV_PCM_STREAM_PLAYBACK); + snd_soc_dai_set_sysclk(cpu_dai, + Q6AFE_LPASS_CLK_ID_PRI_MI2S_IBIT, + DEFAULT_BCLK_RATE, SNDRV_PCM_STREAM_PLAYBACK); + } + snd_soc_dai_set_fmt(cpu_dai, fmt); + break; + + case QUATERNARY_TDM_RX_0: + case QUATERNARY_TDM_TX_0: + if (++(data->quat_tdm_clk_count) == 1) { + snd_soc_dai_set_sysclk(cpu_dai, + Q6AFE_LPASS_CLK_ID_QUAD_TDM_IBIT, + DEFAULT_BCLK_RATE, SNDRV_PCM_STREAM_PLAYBACK); + } + break; + + default: + pr_err("%s: invalid dai id 0x%x\n", __func__, cpu_dai->id); + break; + } + return 0; +} + +static void sdm845_snd_shutdown(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_card *card = rtd->card; + struct sdm845_snd_data *data = snd_soc_card_get_drvdata(card); + struct snd_soc_dai *cpu_dai = rtd->cpu_dai; + + switch (cpu_dai->id) { + case PRIMARY_MI2S_RX: + case PRIMARY_MI2S_TX: + if (--(data->pri_mi2s_clk_count) == 0) { + snd_soc_dai_set_sysclk(cpu_dai, + Q6AFE_LPASS_CLK_ID_MCLK_1, + 0, SNDRV_PCM_STREAM_PLAYBACK); + snd_soc_dai_set_sysclk(cpu_dai, + Q6AFE_LPASS_CLK_ID_PRI_MI2S_IBIT, + 0, SNDRV_PCM_STREAM_PLAYBACK); + }; + break; + + case QUATERNARY_TDM_RX_0: + case QUATERNARY_TDM_TX_0: + if (--(data->quat_tdm_clk_count) == 0) { + snd_soc_dai_set_sysclk(cpu_dai, + Q6AFE_LPASS_CLK_ID_QUAD_TDM_IBIT, + 0, SNDRV_PCM_STREAM_PLAYBACK); + } + break; + + default: + pr_err("%s: invalid dai id 0x%x\n", __func__, cpu_dai->id); + break; + } +} + +static struct snd_soc_ops sdm845_be_ops = { + .hw_params = sdm845_snd_hw_params, + .startup = sdm845_snd_startup, + .shutdown = sdm845_snd_shutdown, +}; + +static int sdm845_be_hw_params_fixup(struct snd_soc_pcm_runtime *rtd, + struct snd_pcm_hw_params *params) +{ + struct snd_interval *rate = hw_param_interval(params, + SNDRV_PCM_HW_PARAM_RATE); + struct snd_interval *channels = hw_param_interval(params, + SNDRV_PCM_HW_PARAM_CHANNELS); + struct snd_mask *fmt = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT); + + rate->min = rate->max = DEFAULT_SAMPLE_RATE_48K; + channels->min = channels->max = 2; + snd_mask_set_format(fmt, SNDRV_PCM_FORMAT_S16_LE); + + return 0; +} + +static void sdm845_add_be_ops(struct snd_soc_card *card) +{ + struct snd_soc_dai_link *link = card->dai_link; + int i, num_links = card->num_links; + + for (i = 0; i < num_links; i++) { + if (link->no_pcm == 1) { + link->ops = &sdm845_be_ops; + link->be_hw_params_fixup = sdm845_be_hw_params_fixup; + } + link++; + } +} + +static int sdm845_snd_platform_probe(struct platform_device *pdev) +{ + struct snd_soc_card *card; + struct sdm845_snd_data *data; + struct device *dev = &pdev->dev; + int ret; + + card = kzalloc(sizeof(*card), GFP_KERNEL); + if (!card) + return -ENOMEM; + + /* Allocate the private data */ + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + card->dev = dev; + card->auto_bind = true; + dev_set_drvdata(dev, card); + ret = qcom_snd_parse_of(card); + if (ret) { + dev_err(dev, "Error parsing OF data\n"); + goto parse_dt_fail; + } + + data->card = card; + snd_soc_card_set_drvdata(card, data); + + sdm845_add_be_ops(card); + ret = snd_soc_register_card(card); + if (ret) { + dev_err(dev, "Sound card registration failed\n"); + goto register_card_fail; + } + return ret; + +register_card_fail: + kfree(card->dai_link); +parse_dt_fail: + kfree(data); + kfree(card); + return ret; +} + +static int sdm845_snd_platform_remove(struct platform_device *pdev) +{ + struct snd_soc_card *card = dev_get_drvdata(&pdev->dev); + struct sdm845_snd_data *data = snd_soc_card_get_drvdata(card); + + card->auto_bind = false; + snd_soc_unregister_card(card); + kfree(card->dai_link); + kfree(data); + kfree(card); + return 0; +} + +static const struct of_device_id sdm845_snd_device_id[] = { + { .compatible = "qcom,sdm845-sndcard" }, + {}, +}; +MODULE_DEVICE_TABLE(of, sdm845_snd_device_id); + +static struct platform_driver sdm845_snd_driver = { + .probe = sdm845_snd_platform_probe, + .remove = sdm845_snd_platform_remove, + .driver = { + .name = "msm-snd-sdm845", + .of_match_table = sdm845_snd_device_id, + }, +}; +module_platform_driver(sdm845_snd_driver); + +MODULE_DESCRIPTION("sdm845 ASoC Machine Driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3 From d101f9b96ee08f0454989bc3adb10e6cf7f3f953 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Wed, 1 Aug 2018 11:47:39 +0100 Subject: ASoC: nau8540: remove redundant variable osrate Variable osrate is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'osrate' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King Signed-off-by: Mark Brown --- sound/soc/codecs/nau8540.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/sound/soc/codecs/nau8540.c b/sound/soc/codecs/nau8540.c index 17104f8dc1a9..e3c8cd17daf2 100644 --- a/sound/soc/codecs/nau8540.c +++ b/sound/soc/codecs/nau8540.c @@ -362,11 +362,8 @@ static const struct snd_soc_dapm_route nau8540_dapm_routes[] = { static int nau8540_clock_check(struct nau8540 *nau8540, int rate, int osr) { - int osrate; - if (osr >= ARRAY_SIZE(osr_adc_sel)) return -EINVAL; - osrate = osr_adc_sel[osr].osr; if (rate * osr > CLK_ADC_MAX) { dev_err(nau8540->dev, "exceed the maximum frequency of CLK_ADC\n"); -- cgit v1.2.3 From 18127744cf446f113ca33f07e5cea893388f781a Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Wed, 1 Aug 2018 11:47:40 +0100 Subject: ASoC: stm32: remove redundant pointers 'priv' and 'rtd' Pointer 'priv' is assigned and not used, removing this allows the removal of pointer 'rtd'. Cleans up clang warning: warning: variable 'priv' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King Signed-off-by: Mark Brown --- sound/soc/stm/stm32_adfsdm.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/sound/soc/stm/stm32_adfsdm.c b/sound/soc/stm/stm32_adfsdm.c index 0e9373064032..706ff005234f 100644 --- a/sound/soc/stm/stm32_adfsdm.c +++ b/sound/soc/stm/stm32_adfsdm.c @@ -269,16 +269,10 @@ static int stm32_adfsdm_pcm_new(struct snd_soc_pcm_runtime *rtd) static void stm32_adfsdm_pcm_free(struct snd_pcm *pcm) { struct snd_pcm_substream *substream; - struct snd_soc_pcm_runtime *rtd; - struct stm32_adfsdm_priv *priv; substream = pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream; - if (substream) { - rtd = substream->private_data; - priv = snd_soc_dai_get_drvdata(rtd->cpu_dai); - + if (substream) snd_pcm_lib_preallocate_free_for_all(pcm); - } } static struct snd_soc_component_driver stm32_adfsdm_soc_platform = { -- cgit v1.2.3 From b0a39d356ae1478a5876bb02ba08af155a3a5554 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 1 Aug 2018 14:18:50 +0100 Subject: ASoC: wcd9335: Fix build due to CLASS-H Controller support This reverts commit c8cb5f775c8dac (ASoC: vert "ASoC: wcd9335: add CLASS-H Controller support) due to missing dependencies. Signed-off-by: Mark Brown --- sound/soc/codecs/Makefile | 2 +- sound/soc/codecs/wcd-clsh.c | 605 -------------------------------------------- sound/soc/codecs/wcd-clsh.h | 49 ---- sound/soc/codecs/wcd9335.c | 10 - 4 files changed, 1 insertion(+), 665 deletions(-) delete mode 100644 sound/soc/codecs/wcd-clsh.c delete mode 100644 sound/soc/codecs/wcd-clsh.h diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index e3a3d4694e15..01410b63daac 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -192,7 +192,7 @@ snd-soc-twl4030-objs := twl4030.o snd-soc-twl6040-objs := twl6040.o snd-soc-uda134x-objs := uda134x.o snd-soc-uda1380-objs := uda1380.o -snd-soc-wcd9335-objs := wcd-clsh.o wcd9335.o +snd-soc-wcd9335-objs := wcd9335.o snd-soc-wl1273-objs := wl1273.o snd-soc-wm-adsp-objs := wm_adsp.o snd-soc-wm0010-objs := wm0010.o diff --git a/sound/soc/codecs/wcd-clsh.c b/sound/soc/codecs/wcd-clsh.c deleted file mode 100644 index 2393456cbd97..000000000000 --- a/sound/soc/codecs/wcd-clsh.c +++ /dev/null @@ -1,605 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// Copyright (c) 2015-2016, The Linux Foundation. All rights reserved. -// Copyright (c) 2017-2018, Linaro Limited - -#include -#include -#include -#include -#include -#include -#include "wcd-clsh.h" - -struct wcd_clsh_ctrl { - int state; - int mode; - int flyback_users; - int buck_users; - int clsh_users; - int codec_version; - struct snd_soc_component *comp; -}; - -/* Class-H registers for codecs from and above WCD9335 */ -#define WCD9XXX_A_CDC_RX0_RX_PATH_CFG0 WCD9335_REG(0xB, 0x42) -#define WCD9XXX_A_CDC_RX_PATH_CLSH_EN_MASK BIT(6) -#define WCD9XXX_A_CDC_RX_PATH_CLSH_ENABLE BIT(6) -#define WCD9XXX_A_CDC_RX_PATH_CLSH_DISABLE 0 -#define WCD9XXX_A_CDC_RX1_RX_PATH_CFG0 WCD9335_REG(0xB, 0x56) -#define WCD9XXX_A_CDC_RX2_RX_PATH_CFG0 WCD9335_REG(0xB, 0x6A) -#define WCD9XXX_A_CDC_CLSH_K1_MSB WCD9335_REG(0xC, 0x08) -#define WCD9XXX_A_CDC_CLSH_K1_MSB_COEF_MASK GENMASK(3, 0) -#define WCD9XXX_A_CDC_CLSH_K1_LSB WCD9335_REG(0xC, 0x09) -#define WCD9XXX_A_CDC_CLSH_K1_LSB_COEF_MASK GENMASK(7, 0) -#define WCD9XXX_A_ANA_RX_SUPPLIES WCD9335_REG(0x6, 0x08) -#define WCD9XXX_A_ANA_RX_REGULATOR_MODE_MASK BIT(1) -#define WCD9XXX_A_ANA_RX_REGULATOR_MODE_CLS_H 0 -#define WCD9XXX_A_ANA_RX_REGULATOR_MODE_CLS_AB BIT(1) -#define WCD9XXX_A_ANA_RX_VNEG_PWR_LVL_MASK BIT(2) -#define WCD9XXX_A_ANA_RX_VNEG_PWR_LVL_UHQA BIT(2) -#define WCD9XXX_A_ANA_RX_VNEG_PWR_LVL_DEFAULT 0 -#define WCD9XXX_A_ANA_RX_VPOS_PWR_LVL_MASK BIT(3) -#define WCD9XXX_A_ANA_RX_VPOS_PWR_LVL_UHQA BIT(3) -#define WCD9XXX_A_ANA_RX_VPOS_PWR_LVL_DEFAULT 0 -#define WCD9XXX_A_ANA_RX_VNEG_EN_MASK BIT(6) -#define WCD9XXX_A_ANA_RX_VNEG_EN_SHIFT 6 -#define WCD9XXX_A_ANA_RX_VNEG_ENABLE BIT(6) -#define WCD9XXX_A_ANA_RX_VNEG_DISABLE 0 -#define WCD9XXX_A_ANA_RX_VPOS_EN_MASK BIT(7) -#define WCD9XXX_A_ANA_RX_VPOS_EN_SHIFT 7 -#define WCD9XXX_A_ANA_RX_VPOS_ENABLE BIT(7) -#define WCD9XXX_A_ANA_RX_VPOS_DISABLE 0 -#define WCD9XXX_A_ANA_HPH WCD9335_REG(0x6, 0x09) -#define WCD9XXX_A_ANA_HPH_PWR_LEVEL_MASK GENMASK(3, 2) -#define WCD9XXX_A_ANA_HPH_PWR_LEVEL_UHQA 0x08 -#define WCD9XXX_A_ANA_HPH_PWR_LEVEL_LP 0x04 -#define WCD9XXX_A_ANA_HPH_PWR_LEVEL_NORMAL 0x0 -#define WCD9XXX_A_CDC_CLSH_CRC WCD9335_REG(0xC, 0x01) -#define WCD9XXX_A_CDC_CLSH_CRC_CLK_EN_MASK BIT(0) -#define WCD9XXX_A_CDC_CLSH_CRC_CLK_ENABLE BIT(0) -#define WCD9XXX_A_CDC_CLSH_CRC_CLK_DISABLE 0 -#define WCD9XXX_FLYBACK_EN WCD9335_REG(0x6, 0xA4) -#define WCD9XXX_FLYBACK_EN_DELAY_SEL_MASK GENMASK(6, 5) -#define WCD9XXX_FLYBACK_EN_DELAY_26P25_US 0x40 -#define WCD9XXX_FLYBACK_EN_RESET_BY_EXT_MASK BIT(4) -#define WCD9XXX_FLYBACK_EN_PWDN_WITHOUT_DELAY BIT(4) -#define WCD9XXX_FLYBACK_EN_PWDN_WITH_DELAY 0 -#define WCD9XXX_RX_BIAS_FLYB_BUFF WCD9335_REG(0x6, 0xC7) -#define WCD9XXX_RX_BIAS_FLYB_VNEG_5_UA_MASK GENMASK(7, 4) -#define WCD9XXX_RX_BIAS_FLYB_VPOS_5_UA_MASK GENMASK(0, 3) -#define WCD9XXX_HPH_L_EN WCD9335_REG(0x6, 0xD3) -#define WCD9XXX_HPH_CONST_SEL_L_MASK GENMASK(7, 3) -#define WCD9XXX_HPH_CONST_SEL_BYPASS 0 -#define WCD9XXX_HPH_CONST_SEL_LP_PATH 0x40 -#define WCD9XXX_HPH_CONST_SEL_HQ_PATH 0x80 -#define WCD9XXX_HPH_R_EN WCD9335_REG(0x6, 0xD6) -#define WCD9XXX_HPH_REFBUFF_UHQA_CTL WCD9335_REG(0x6, 0xDD) -#define WCD9XXX_HPH_REFBUFF_UHQA_GAIN_MASK GENMASK(2, 0) -#define WCD9XXX_CLASSH_CTRL_VCL_2 WCD9335_REG(0x6, 0x9B) -#define WCD9XXX_CLASSH_CTRL_VCL_2_VREF_FILT_1_MASK GENMASK(5, 4) -#define WCD9XXX_CLASSH_CTRL_VCL_VREF_FILT_R_50KOHM 0x20 -#define WCD9XXX_CLASSH_CTRL_VCL_VREF_FILT_R_0KOHM 0x0 -#define WCD9XXX_CDC_RX1_RX_PATH_CTL WCD9335_REG(0xB, 0x55) -#define WCD9XXX_CDC_RX2_RX_PATH_CTL WCD9335_REG(0xB, 0x69) -#define WCD9XXX_CDC_CLK_RST_CTRL_MCLK_CONTROL WCD9335_REG(0xD, 0x41) -#define WCD9XXX_CDC_CLK_RST_CTRL_MCLK_EN_MASK BIT(0) -#define WCD9XXX_CDC_CLK_RST_CTRL_MCLK_11P3_EN_MASK BIT(1) -#define WCD9XXX_CLASSH_CTRL_CCL_1 WCD9335_REG(0x6, 0x9C) -#define WCD9XXX_CLASSH_CTRL_CCL_1_DELTA_IPEAK_MASK GENMASK(7, 4) -#define WCD9XXX_CLASSH_CTRL_CCL_1_DELTA_IPEAK_50MA 0x50 -#define WCD9XXX_CLASSH_CTRL_CCL_1_DELTA_IPEAK_30MA 0x30 - -#define CLSH_REQ_ENABLE true -#define CLSH_REQ_DISABLE false -#define WCD_USLEEP_RANGE 50 - -enum { - DAC_GAIN_0DB = 0, - DAC_GAIN_0P2DB, - DAC_GAIN_0P4DB, - DAC_GAIN_0P6DB, - DAC_GAIN_0P8DB, - DAC_GAIN_M0P2DB, - DAC_GAIN_M0P4DB, - DAC_GAIN_M0P6DB, -}; - -static inline void wcd_enable_clsh_block(struct wcd_clsh_ctrl *ctrl, - bool enable) -{ - struct snd_soc_component *comp = ctrl->comp; - - if ((enable && ++ctrl->clsh_users == 1) || - (!enable && --ctrl->clsh_users == 0)) - snd_soc_component_update_bits(comp, WCD9XXX_A_CDC_CLSH_CRC, - WCD9XXX_A_CDC_CLSH_CRC_CLK_EN_MASK, - enable); - if (ctrl->clsh_users < 0) - ctrl->clsh_users = 0; -} - -static inline bool wcd_clsh_enable_status(struct snd_soc_component *comp) -{ - return snd_soc_component_read32(comp, WCD9XXX_A_CDC_CLSH_CRC) & - WCD9XXX_A_CDC_CLSH_CRC_CLK_EN_MASK; -} - -static inline void wcd_clsh_set_buck_mode(struct snd_soc_component *comp, - int mode) -{ - /* set to HIFI */ - if (mode == CLS_H_HIFI) - snd_soc_component_update_bits(comp, WCD9XXX_A_ANA_RX_SUPPLIES, - WCD9XXX_A_ANA_RX_VPOS_PWR_LVL_MASK, - WCD9XXX_A_ANA_RX_VPOS_PWR_LVL_UHQA); - else - snd_soc_component_update_bits(comp, WCD9XXX_A_ANA_RX_SUPPLIES, - WCD9XXX_A_ANA_RX_VPOS_PWR_LVL_MASK, - WCD9XXX_A_ANA_RX_VPOS_PWR_LVL_DEFAULT); -} - -static inline void wcd_clsh_set_flyback_mode(struct snd_soc_component *comp, - int mode) -{ - /* set to HIFI */ - if (mode == CLS_H_HIFI) - snd_soc_component_update_bits(comp, WCD9XXX_A_ANA_RX_SUPPLIES, - WCD9XXX_A_ANA_RX_VNEG_PWR_LVL_MASK, - WCD9XXX_A_ANA_RX_VNEG_PWR_LVL_UHQA); - else - snd_soc_component_update_bits(comp, WCD9XXX_A_ANA_RX_SUPPLIES, - WCD9XXX_A_ANA_RX_VNEG_PWR_LVL_MASK, - WCD9XXX_A_ANA_RX_VNEG_PWR_LVL_DEFAULT); -} - -static void wcd_clsh_buck_ctrl(struct wcd_clsh_ctrl *ctrl, - int mode, - bool enable) -{ - struct snd_soc_component *comp = ctrl->comp; - - /* enable/disable buck */ - if ((enable && (++ctrl->buck_users == 1)) || - (!enable && (--ctrl->buck_users == 0))) - snd_soc_component_update_bits(comp, WCD9XXX_A_ANA_RX_SUPPLIES, - WCD9XXX_A_ANA_RX_VPOS_EN_MASK, - enable << WCD9XXX_A_ANA_RX_VPOS_EN_SHIFT); - /* - * 500us sleep is required after buck enable/disable - * as per HW requirement - */ - usleep_range(500, 500 + WCD_USLEEP_RANGE); -} - -static void wcd_clsh_flyback_ctrl(struct wcd_clsh_ctrl *ctrl, - int mode, - bool enable) -{ - struct snd_soc_component *comp = ctrl->comp; - - int vneg[] = {0x00, 0x40}; - - /* enable/disable flyback */ - if ((enable && (++ctrl->flyback_users == 1)) || - (!enable && (--ctrl->flyback_users == 0))) { - snd_soc_component_update_bits(comp, WCD9XXX_A_ANA_RX_SUPPLIES, - WCD9XXX_A_ANA_RX_VNEG_EN_MASK, - enable << WCD9XXX_A_ANA_RX_VNEG_EN_SHIFT); - /* 100usec delay is needed as per HW requirement */ - usleep_range(100, 110); - - if (enable && (WCD9335_IS_1_1(ctrl->codec_version))) { - wcd_clsh_set_flyback_mode(comp, CLS_H_HIFI); - snd_soc_component_update_bits(comp, WCD9XXX_FLYBACK_EN, - WCD9XXX_FLYBACK_EN_DELAY_SEL_MASK, - WCD9XXX_FLYBACK_EN_DELAY_26P25_US); - snd_soc_component_update_bits(comp, WCD9XXX_FLYBACK_EN, - WCD9XXX_FLYBACK_EN_RESET_BY_EXT_MASK, - WCD9XXX_FLYBACK_EN_PWDN_WITHOUT_DELAY); - vneg[0] = snd_soc_component_read32(comp, - WCD9XXX_A_ANA_RX_SUPPLIES); - vneg[0] &= ~(0x40); - vneg[1] = vneg[0] | 0x40; - - snd_soc_component_write(comp, - WCD9XXX_A_ANA_RX_SUPPLIES, vneg[0]); - snd_soc_component_write(comp, - WCD9XXX_A_ANA_RX_SUPPLIES, vneg[1]); - /* 500usec delay is needed as per HW requirement */ - usleep_range(500, 510); - snd_soc_component_update_bits(comp, WCD9XXX_FLYBACK_EN, - WCD9XXX_FLYBACK_EN_RESET_BY_EXT_MASK, - WCD9XXX_FLYBACK_EN_PWDN_WITH_DELAY); - wcd_clsh_set_flyback_mode(comp, mode); - } - - } - /* - * 500us sleep is required after flyback enable/disable - * as per HW requirement - */ - usleep_range(500, 500 + WCD_USLEEP_RANGE); -} - -static void wcd_clsh_set_gain_path(struct wcd_clsh_ctrl *ctrl, int mode) -{ - struct snd_soc_component *comp = ctrl->comp; - int val = 0; - - switch (mode) { - case CLS_H_NORMAL: - case CLS_AB: - val = WCD9XXX_HPH_CONST_SEL_BYPASS; - break; - case CLS_H_HIFI: - val = WCD9XXX_HPH_CONST_SEL_HQ_PATH; - break; - case CLS_H_LP: - val = WCD9XXX_HPH_CONST_SEL_LP_PATH; - break; - }; - - snd_soc_component_update_bits(comp, WCD9XXX_HPH_L_EN, - WCD9XXX_HPH_CONST_SEL_L_MASK, - val); - - snd_soc_component_update_bits(comp, WCD9XXX_HPH_R_EN, - WCD9XXX_HPH_CONST_SEL_L_MASK, - val); -} - -static void wcd_clsh_set_hph_mode(struct snd_soc_component *comp, - int mode) -{ - int val = 0, gain = 0, res_val; - int ipeak = WCD9XXX_CLASSH_CTRL_CCL_1_DELTA_IPEAK_50MA; - - res_val = WCD9XXX_CLASSH_CTRL_VCL_VREF_FILT_R_0KOHM; - switch (mode) { - case CLS_H_NORMAL: - res_val = WCD9XXX_CLASSH_CTRL_VCL_VREF_FILT_R_50KOHM; - val = WCD9XXX_A_ANA_HPH_PWR_LEVEL_NORMAL; - gain = DAC_GAIN_0DB; - ipeak = WCD9XXX_CLASSH_CTRL_CCL_1_DELTA_IPEAK_50MA; - break; - case CLS_AB: - val = WCD9XXX_A_ANA_HPH_PWR_LEVEL_NORMAL; - gain = DAC_GAIN_0DB; - ipeak = WCD9XXX_CLASSH_CTRL_CCL_1_DELTA_IPEAK_50MA; - break; - case CLS_H_HIFI: - val = WCD9XXX_A_ANA_HPH_PWR_LEVEL_UHQA; - gain = DAC_GAIN_M0P2DB; - ipeak = WCD9XXX_CLASSH_CTRL_CCL_1_DELTA_IPEAK_50MA; - break; - case CLS_H_LP: - val = WCD9XXX_A_ANA_HPH_PWR_LEVEL_LP; - ipeak = WCD9XXX_CLASSH_CTRL_CCL_1_DELTA_IPEAK_30MA; - break; - }; - - snd_soc_component_update_bits(comp, WCD9XXX_A_ANA_HPH, - WCD9XXX_A_ANA_HPH_PWR_LEVEL_MASK, val); - snd_soc_component_update_bits(comp, WCD9XXX_CLASSH_CTRL_VCL_2, - WCD9XXX_CLASSH_CTRL_VCL_2_VREF_FILT_1_MASK, - res_val); - if (mode != CLS_H_LP) - snd_soc_component_update_bits(comp, - WCD9XXX_HPH_REFBUFF_UHQA_CTL, - WCD9XXX_HPH_REFBUFF_UHQA_GAIN_MASK, - gain); - snd_soc_component_update_bits(comp, WCD9XXX_CLASSH_CTRL_CCL_1, - WCD9XXX_CLASSH_CTRL_CCL_1_DELTA_IPEAK_MASK, - ipeak); -} - -static void wcd_clsh_set_flyback_current(struct snd_soc_component *comp, - int mode) -{ - - snd_soc_component_update_bits(comp, WCD9XXX_RX_BIAS_FLYB_BUFF, - WCD9XXX_RX_BIAS_FLYB_VPOS_5_UA_MASK, 0x0A); - snd_soc_component_update_bits(comp, WCD9XXX_RX_BIAS_FLYB_BUFF, - WCD9XXX_RX_BIAS_FLYB_VNEG_5_UA_MASK, 0x0A); - /* Sleep needed to avoid click and pop as per HW requirement */ - usleep_range(100, 110); -} - -static void wcd_clsh_set_buck_regulator_mode(struct snd_soc_component *comp, - int mode) -{ - if (mode == CLS_AB) - snd_soc_component_update_bits(comp, WCD9XXX_A_ANA_RX_SUPPLIES, - WCD9XXX_A_ANA_RX_REGULATOR_MODE_MASK, - WCD9XXX_A_ANA_RX_REGULATOR_MODE_CLS_AB); - else - snd_soc_component_update_bits(comp, WCD9XXX_A_ANA_RX_SUPPLIES, - WCD9XXX_A_ANA_RX_REGULATOR_MODE_MASK, - WCD9XXX_A_ANA_RX_REGULATOR_MODE_CLS_H); -} - -static void wcd_clsh_state_lo(struct wcd_clsh_ctrl *ctrl, int req_state, - bool is_enable, int mode) -{ - struct snd_soc_component *comp = ctrl->comp; - - if (mode != CLS_AB) { - dev_err(comp->dev, "%s: LO cannot be in this mode: %d\n", - __func__, mode); - return; - } - - if (is_enable) { - wcd_clsh_set_buck_regulator_mode(comp, mode); - wcd_clsh_set_buck_mode(comp, mode); - wcd_clsh_set_flyback_mode(comp, mode); - wcd_clsh_flyback_ctrl(ctrl, mode, true); - wcd_clsh_set_flyback_current(comp, mode); - wcd_clsh_buck_ctrl(ctrl, mode, true); - } else { - wcd_clsh_buck_ctrl(ctrl, mode, false); - wcd_clsh_flyback_ctrl(ctrl, mode, false); - wcd_clsh_set_flyback_mode(comp, CLS_H_NORMAL); - wcd_clsh_set_buck_mode(comp, CLS_H_NORMAL); - wcd_clsh_set_buck_regulator_mode(comp, CLS_H_NORMAL); - } -} - -static void wcd_clsh_state_hph_r(struct wcd_clsh_ctrl *ctrl, int req_state, - bool is_enable, int mode) -{ - struct snd_soc_component *comp = ctrl->comp; - - if (mode == CLS_H_NORMAL) { - dev_err(comp->dev, "%s: Normal mode not applicable for hph_r\n", - __func__); - return; - } - - if (is_enable) { - if (mode != CLS_AB) { - wcd_enable_clsh_block(ctrl, true); - /* - * These K1 values depend on the Headphone Impedance - * For now it is assumed to be 16 ohm - */ - snd_soc_component_update_bits(comp, - WCD9XXX_A_CDC_CLSH_K1_MSB, - WCD9XXX_A_CDC_CLSH_K1_MSB_COEF_MASK, - 0x00); - snd_soc_component_update_bits(comp, - WCD9XXX_A_CDC_CLSH_K1_LSB, - WCD9XXX_A_CDC_CLSH_K1_LSB_COEF_MASK, - 0xC0); - snd_soc_component_update_bits(comp, - WCD9XXX_A_CDC_RX2_RX_PATH_CFG0, - WCD9XXX_A_CDC_RX_PATH_CLSH_EN_MASK, - WCD9XXX_A_CDC_RX_PATH_CLSH_ENABLE); - } - wcd_clsh_set_buck_regulator_mode(comp, mode); - wcd_clsh_set_flyback_mode(comp, mode); - wcd_clsh_flyback_ctrl(ctrl, mode, true); - wcd_clsh_set_flyback_current(comp, mode); - wcd_clsh_set_buck_mode(comp, mode); - wcd_clsh_buck_ctrl(ctrl, mode, true); - wcd_clsh_set_hph_mode(comp, mode); - wcd_clsh_set_gain_path(ctrl, mode); - } else { - wcd_clsh_set_hph_mode(comp, CLS_H_NORMAL); - - if (mode != CLS_AB) { - snd_soc_component_update_bits(comp, - WCD9XXX_A_CDC_RX2_RX_PATH_CFG0, - WCD9XXX_A_CDC_RX_PATH_CLSH_EN_MASK, - WCD9XXX_A_CDC_RX_PATH_CLSH_DISABLE); - wcd_enable_clsh_block(ctrl, false); - } - /* buck and flyback set to default mode and disable */ - wcd_clsh_buck_ctrl(ctrl, CLS_H_NORMAL, false); - wcd_clsh_flyback_ctrl(ctrl, CLS_H_NORMAL, false); - wcd_clsh_set_flyback_mode(comp, CLS_H_NORMAL); - wcd_clsh_set_buck_mode(comp, CLS_H_NORMAL); - wcd_clsh_set_buck_regulator_mode(comp, CLS_H_NORMAL); - } -} - -static void wcd_clsh_state_hph_l(struct wcd_clsh_ctrl *ctrl, int req_state, - bool is_enable, int mode) -{ - struct snd_soc_component *comp = ctrl->comp; - - if (mode == CLS_H_NORMAL) { - dev_err(comp->dev, "%s: Normal mode not applicable for hph_l\n", - __func__); - return; - } - - if (is_enable) { - if (mode != CLS_AB) { - wcd_enable_clsh_block(ctrl, true); - /* - * These K1 values depend on the Headphone Impedance - * For now it is assumed to be 16 ohm - */ - snd_soc_component_update_bits(comp, - WCD9XXX_A_CDC_CLSH_K1_MSB, - WCD9XXX_A_CDC_CLSH_K1_MSB_COEF_MASK, - 0x00); - snd_soc_component_update_bits(comp, - WCD9XXX_A_CDC_CLSH_K1_LSB, - WCD9XXX_A_CDC_CLSH_K1_LSB_COEF_MASK, - 0xC0); - snd_soc_component_update_bits(comp, - WCD9XXX_A_CDC_RX1_RX_PATH_CFG0, - WCD9XXX_A_CDC_RX_PATH_CLSH_EN_MASK, - WCD9XXX_A_CDC_RX_PATH_CLSH_ENABLE); - } - wcd_clsh_set_buck_regulator_mode(comp, mode); - wcd_clsh_set_flyback_mode(comp, mode); - wcd_clsh_flyback_ctrl(ctrl, mode, true); - wcd_clsh_set_flyback_current(comp, mode); - wcd_clsh_set_buck_mode(comp, mode); - wcd_clsh_buck_ctrl(ctrl, mode, true); - wcd_clsh_set_hph_mode(comp, mode); - wcd_clsh_set_gain_path(ctrl, mode); - } else { - wcd_clsh_set_hph_mode(comp, CLS_H_NORMAL); - - if (mode != CLS_AB) { - snd_soc_component_update_bits(comp, - WCD9XXX_A_CDC_RX1_RX_PATH_CFG0, - WCD9XXX_A_CDC_RX_PATH_CLSH_EN_MASK, - WCD9XXX_A_CDC_RX_PATH_CLSH_DISABLE); - wcd_enable_clsh_block(ctrl, false); - } - /* set buck and flyback to Default Mode */ - wcd_clsh_buck_ctrl(ctrl, CLS_H_NORMAL, false); - wcd_clsh_flyback_ctrl(ctrl, CLS_H_NORMAL, false); - wcd_clsh_set_flyback_mode(comp, CLS_H_NORMAL); - wcd_clsh_set_buck_mode(comp, CLS_H_NORMAL); - wcd_clsh_set_buck_regulator_mode(comp, CLS_H_NORMAL); - } -} - -static void wcd_clsh_state_ear(struct wcd_clsh_ctrl *ctrl, int req_state, - bool is_enable, int mode) -{ - struct snd_soc_component *comp = ctrl->comp; - - if (mode != CLS_H_NORMAL) { - dev_err(comp->dev, "%s: mode: %d cannot be used for EAR\n", - __func__, mode); - return; - } - - if (is_enable) { - wcd_enable_clsh_block(ctrl, true); - snd_soc_component_update_bits(comp, - WCD9XXX_A_CDC_RX0_RX_PATH_CFG0, - WCD9XXX_A_CDC_RX_PATH_CLSH_EN_MASK, - WCD9XXX_A_CDC_RX_PATH_CLSH_ENABLE); - wcd_clsh_set_buck_mode(comp, mode); - wcd_clsh_set_flyback_mode(comp, mode); - wcd_clsh_flyback_ctrl(ctrl, mode, true); - wcd_clsh_set_flyback_current(comp, mode); - wcd_clsh_buck_ctrl(ctrl, mode, true); - } else { - snd_soc_component_update_bits(comp, - WCD9XXX_A_CDC_RX0_RX_PATH_CFG0, - WCD9XXX_A_CDC_RX_PATH_CLSH_EN_MASK, - WCD9XXX_A_CDC_RX_PATH_CLSH_DISABLE); - wcd_enable_clsh_block(ctrl, false); - wcd_clsh_buck_ctrl(ctrl, mode, false); - wcd_clsh_flyback_ctrl(ctrl, mode, false); - wcd_clsh_set_flyback_mode(comp, CLS_H_NORMAL); - wcd_clsh_set_buck_mode(comp, CLS_H_NORMAL); - } -} - -static int _wcd_clsh_ctrl_set_state(struct wcd_clsh_ctrl *ctrl, int req_state, - bool is_enable, int mode) -{ - switch (req_state) { - case WCD_CLSH_STATE_EAR: - wcd_clsh_state_ear(ctrl, req_state, is_enable, mode); - break; - case WCD_CLSH_STATE_HPHL: - wcd_clsh_state_hph_l(ctrl, req_state, is_enable, mode); - break; - case WCD_CLSH_STATE_HPHR: - wcd_clsh_state_hph_r(ctrl, req_state, is_enable, mode); - break; - break; - case WCD_CLSH_STATE_LO: - wcd_clsh_state_lo(ctrl, req_state, is_enable, mode); - break; - default: - break; - } - - return 0; -} - -/* - * Function: wcd_clsh_is_state_valid - * Params: state - * Description: - * Provides information on valid states of Class H configuration - */ -static bool wcd_clsh_is_state_valid(int state) -{ - switch (state) { - case WCD_CLSH_STATE_IDLE: - case WCD_CLSH_STATE_EAR: - case WCD_CLSH_STATE_HPHL: - case WCD_CLSH_STATE_HPHR: - case WCD_CLSH_STATE_LO: - return true; - default: - return false; - }; -} - -/* - * Function: wcd_clsh_fsm - * Params: ctrl, req_state, req_type, clsh_event - * Description: - * This function handles PRE DAC and POST DAC conditions of different devices - * and updates class H configuration of different combination of devices - * based on validity of their states. ctrl will contain current - * class h state information - */ -int wcd_clsh_ctrl_set_state(struct wcd_clsh_ctrl *ctrl, - enum wcd_clsh_event clsh_event, - int nstate, - enum wcd_clsh_mode mode) -{ - struct snd_soc_component *comp = ctrl->comp; - - if (nstate == ctrl->state) - return 0; - - if (!wcd_clsh_is_state_valid(nstate)) { - dev_err(comp->dev, "Class-H not a valid new state:\n"); - return -EINVAL; - } - - switch (clsh_event) { - case WCD_CLSH_EVENT_PRE_DAC: - _wcd_clsh_ctrl_set_state(ctrl, nstate, CLSH_REQ_ENABLE, mode); - break; - case WCD_CLSH_EVENT_POST_PA: - _wcd_clsh_ctrl_set_state(ctrl, nstate, CLSH_REQ_DISABLE, mode); - break; - }; - - ctrl->state = nstate; - ctrl->mode = mode; - - return 0; -} - -int wcd_clsh_ctrl_get_state(struct wcd_clsh_ctrl *ctrl) -{ - return ctrl->state; -} - -struct wcd_clsh_ctrl *wcd_clsh_ctrl_alloc(struct snd_soc_component *comp, - int version) -{ - struct wcd_clsh_ctrl *ctrl; - - ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL); - if (!ctrl) - return ERR_PTR(-ENOMEM); - - ctrl->state = WCD_CLSH_STATE_IDLE; - ctrl->comp = comp; - - return ctrl; -} - -void wcd_clsh_ctrl_free(struct wcd_clsh_ctrl *ctrl) -{ - kfree(ctrl); -} diff --git a/sound/soc/codecs/wcd-clsh.h b/sound/soc/codecs/wcd-clsh.h deleted file mode 100644 index a902f9893467..000000000000 --- a/sound/soc/codecs/wcd-clsh.h +++ /dev/null @@ -1,49 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ - -#ifndef _WCD_CLSH_V2_H_ -#define _WCD_CLSH_V2_H_ -#include - -enum wcd_clsh_event { - WCD_CLSH_EVENT_PRE_DAC = 1, - WCD_CLSH_EVENT_POST_PA, -}; - -/* - * Basic states for Class H state machine. - * represented as a bit mask within a u8 data type - * bit 0: EAR mode - * bit 1: HPH Left mode - * bit 2: HPH Right mode - * bit 3: Lineout mode - */ -#define WCD_CLSH_STATE_IDLE 0 -#define WCD_CLSH_STATE_EAR BIT(0) -#define WCD_CLSH_STATE_HPHL BIT(1) -#define WCD_CLSH_STATE_HPHR BIT(2) -#define WCD_CLSH_STATE_LO BIT(3) -#define WCD_CLSH_STATE_MAX 4 -#define NUM_CLSH_STATES_V2 BIT(WCD_CLSH_STATE_MAX) - -enum wcd_clsh_mode { - CLS_H_NORMAL = 0, /* Class-H Default */ - CLS_H_HIFI, /* Class-H HiFi */ - CLS_H_LP, /* Class-H Low Power */ - CLS_AB, /* Class-AB */ - CLS_H_LOHIFI, /* LoHIFI */ - CLS_NONE, /* None of the above modes */ -}; - -struct wcd_clsh_ctrl; - -extern struct wcd_clsh_ctrl *wcd_clsh_ctrl_alloc( - struct snd_soc_component *component, - int version); -extern void wcd_clsh_ctrl_free(struct wcd_clsh_ctrl *ctrl); -extern int wcd_clsh_ctrl_get_state(struct wcd_clsh_ctrl *ctrl); -extern int wcd_clsh_ctrl_set_state(struct wcd_clsh_ctrl *ctrl, - enum wcd_clsh_event event, - int state, - enum wcd_clsh_mode mode); - -#endif /* _WCD_CLSH_V2_H_ */ diff --git a/sound/soc/codecs/wcd9335.c b/sound/soc/codecs/wcd9335.c index 06c73699f16f..bd9de5d45fa9 100644 --- a/sound/soc/codecs/wcd9335.c +++ b/sound/soc/codecs/wcd9335.c @@ -21,7 +21,6 @@ #include #include #include -#include "wcd-clsh.h" #define WCD9335_RATES_MASK (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |\ SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_48000 |\ @@ -182,7 +181,6 @@ struct wcd9335_codec { int sido_ccl_cnt; enum wcd_clock_type clk_type; - struct wcd_clsh_ctrl *clsh_ctrl; u32 hph_mode; }; @@ -1068,13 +1066,6 @@ static int wcd9335_codec_probe(struct snd_soc_component *component) int i; snd_soc_component_init_regmap(component, wcd->regmap); - /* Class-H Init*/ - wcd->clsh_ctrl = wcd_clsh_ctrl_alloc(component, wcd->version); - if (IS_ERR(wcd->clsh_ctrl)) - return PTR_ERR(wcd->clsh_ctrl); - - /* Default HPH Mode to Class-H HiFi */ - wcd->hph_mode = CLS_H_HIFI; wcd->component = component; wcd9335_codec_init(component); @@ -1089,7 +1080,6 @@ static void wcd9335_codec_remove(struct snd_soc_component *comp) { struct wcd9335_codec *wcd = dev_get_drvdata(comp->dev); - wcd_clsh_ctrl_free(wcd->clsh_ctrl); free_irq(regmap_irq_get_virq(wcd->irq_data, WCD9335_IRQ_SLIMBUS), wcd); } -- cgit v1.2.3 From b74fd69043262003c5b7ce545e59f5a7234ab290 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 1 Aug 2018 14:22:56 +0100 Subject: ASoC: wcd9335: Fix build This reverts commit e57d4ca882e28 (ASoC: wcd9335: add support to wcd9335 codec) due to build failures caused by missing dependencies. Signed-off-by: Mark Brown --- sound/soc/codecs/Kconfig | 5 - sound/soc/codecs/Makefile | 2 - sound/soc/codecs/wcd9335.c | 1154 -------------------------------------------- 3 files changed, 1161 deletions(-) delete mode 100644 sound/soc/codecs/wcd9335.c diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index cb09abf18dde..efb095dbcd71 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -1066,11 +1066,6 @@ config SND_SOC_UDA1380 tristate depends on I2C -config SND_SOC_WCD9335 - tristate "WCD9335 Codec" - depends on MFD_WCD9335 - tristate - config SND_SOC_WL1273 tristate diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 01410b63daac..7ae7c85e8219 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -192,7 +192,6 @@ snd-soc-twl4030-objs := twl4030.o snd-soc-twl6040-objs := twl6040.o snd-soc-uda134x-objs := uda134x.o snd-soc-uda1380-objs := uda1380.o -snd-soc-wcd9335-objs := wcd9335.o snd-soc-wl1273-objs := wl1273.o snd-soc-wm-adsp-objs := wm_adsp.o snd-soc-wm0010-objs := wm0010.o @@ -452,7 +451,6 @@ obj-$(CONFIG_SND_SOC_TWL4030) += snd-soc-twl4030.o obj-$(CONFIG_SND_SOC_TWL6040) += snd-soc-twl6040.o obj-$(CONFIG_SND_SOC_UDA134X) += snd-soc-uda134x.o obj-$(CONFIG_SND_SOC_UDA1380) += snd-soc-uda1380.o -obj-$(CONFIG_SND_SOC_WCD9335) += snd-soc-wcd9335.o obj-$(CONFIG_SND_SOC_WL1273) += snd-soc-wl1273.o obj-$(CONFIG_SND_SOC_WM0010) += snd-soc-wm0010.o obj-$(CONFIG_SND_SOC_WM1250_EV1) += snd-soc-wm1250-ev1.o diff --git a/sound/soc/codecs/wcd9335.c b/sound/soc/codecs/wcd9335.c deleted file mode 100644 index bd9de5d45fa9..000000000000 --- a/sound/soc/codecs/wcd9335.c +++ /dev/null @@ -1,1154 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// Copyright (c) 2015-2016, The Linux Foundation. All rights reserved. -// Copyright (c) 2017-2018, Linaro Limited - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define WCD9335_RATES_MASK (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |\ - SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_48000 |\ - SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_192000) -/* Fractional Rates */ -#define WCD9335_FRAC_RATES_MASK (SNDRV_PCM_RATE_44100) -#define WCD9335_FORMATS_S16_S24_LE (SNDRV_PCM_FMTBIT_S16_LE | \ - SNDRV_PCM_FMTBIT_S24_LE) - -/* slave port water mark level - * (0: 6bytes, 1: 9bytes, 2: 12 bytes, 3: 15 bytes) - */ -#define SLAVE_PORT_WATER_MARK_6BYTES 0 -#define SLAVE_PORT_WATER_MARK_9BYTES 1 -#define SLAVE_PORT_WATER_MARK_12BYTES 2 -#define SLAVE_PORT_WATER_MARK_15BYTES 3 -#define SLAVE_PORT_WATER_MARK_SHIFT 1 -#define SLAVE_PORT_ENABLE 1 -#define SLAVE_PORT_DISABLE 0 -#define WCD9335_SLIM_WATER_MARK_VAL \ - ((SLAVE_PORT_WATER_MARK_12BYTES << SLAVE_PORT_WATER_MARK_SHIFT) | \ - (SLAVE_PORT_ENABLE)) - -#define WCD9335_SLIM_NUM_PORT_REG 3 -#define WCD9335_SLIM_PGD_PORT_INT_TX_EN0 (WCD9335_SLIM_PGD_PORT_INT_EN0 + 2) - -#define WCD9335_MCLK_CLK_12P288MHZ 12288000 -#define WCD9335_MCLK_CLK_9P6MHZ 9600000 - -#define WCD9335_SLIM_CLOSE_TIMEOUT 1000 -#define WCD9335_SLIM_IRQ_OVERFLOW (1 << 0) -#define WCD9335_SLIM_IRQ_UNDERFLOW (1 << 1) -#define WCD9335_SLIM_IRQ_PORT_CLOSED (1 << 2) - -#define WCD9335_NUM_INTERPOLATORS 9 -#define WCD9335_RX_START 16 -#define WCD9335_SLIM_CH_START 128 - -#define WCD9335_SLIM_RX_CH(p) \ - {.port = p + WCD9335_RX_START, .shift = p,} - -/* vout step value */ -#define WCD9335_CALCULATE_VOUT_D(req_mv) (((req_mv - 650) * 10) / 25) - -enum { - WCD9335_RX0 = 0, - WCD9335_RX1, - WCD9335_RX2, - WCD9335_RX3, - WCD9335_RX4, - WCD9335_RX5, - WCD9335_RX6, - WCD9335_RX7, - WCD9335_RX8, - WCD9335_RX9, - WCD9335_RX10, - WCD9335_RX11, - WCD9335_RX12, - WCD9335_RX_MAX, -}; - -enum { - SIDO_SOURCE_INTERNAL = 0, - SIDO_SOURCE_RCO_BG, -}; - -enum wcd9335_sido_voltage { - SIDO_VOLTAGE_SVS_MV = 950, - SIDO_VOLTAGE_NOMINAL_MV = 1100, -}; - -enum { - AIF1_PB = 0, - AIF1_CAP, - AIF2_PB, - AIF2_CAP, - AIF3_PB, - AIF3_CAP, - AIF4_PB, - NUM_CODEC_DAIS, -}; - -enum { - INTn_2_INP_SEL_ZERO = 0, - INTn_2_INP_SEL_RX0, - INTn_2_INP_SEL_RX1, - INTn_2_INP_SEL_RX2, - INTn_2_INP_SEL_RX3, - INTn_2_INP_SEL_RX4, - INTn_2_INP_SEL_RX5, - INTn_2_INP_SEL_RX6, - INTn_2_INP_SEL_RX7, - INTn_2_INP_SEL_PROXIMITY, -}; - -enum { - INTn_1_MIX_INP_SEL_ZERO = 0, - INTn_1_MIX_INP_SEL_DEC0, - INTn_1_MIX_INP_SEL_DEC1, - INTn_1_MIX_INP_SEL_IIR0, - INTn_1_MIX_INP_SEL_IIR1, - INTn_1_MIX_INP_SEL_RX0, - INTn_1_MIX_INP_SEL_RX1, - INTn_1_MIX_INP_SEL_RX2, - INTn_1_MIX_INP_SEL_RX3, - INTn_1_MIX_INP_SEL_RX4, - INTn_1_MIX_INP_SEL_RX5, - INTn_1_MIX_INP_SEL_RX6, - INTn_1_MIX_INP_SEL_RX7, - -}; - -enum wcd_clock_type { - WCD_CLK_OFF, - WCD_CLK_RCO, - WCD_CLK_MCLK, -}; - -struct wcd9335_slim_ch { - u32 ch_num; - u16 port; - u16 shift; - struct list_head list; -}; - -struct wcd_slim_codec_dai_data { - struct list_head slim_ch_list; - struct slim_stream_config sconfig; - struct slim_stream_runtime *sruntime; -}; - -struct wcd9335_codec { - struct device *dev; - struct clk *mclk; - struct clk *native_clk; - u32 mclk_rate; - u8 intf_type; - u8 version; - - struct slim_device *slim; - struct slim_device *slim_ifd; - struct regmap *regmap; - struct regmap *if_regmap; - struct regmap_irq_chip_data *irq_data; - - struct wcd9335_slim_ch rx_chs[WCD9335_RX_MAX]; - u32 num_rx_port; - - int sido_input_src; - enum wcd9335_sido_voltage sido_voltage; - - struct wcd_slim_codec_dai_data dai[NUM_CODEC_DAIS]; - struct snd_soc_component *component; - - int master_bias_users; - int clk_mclk_users; - int clk_rco_users; - int sido_ccl_cnt; - enum wcd_clock_type clk_type; - - u32 hph_mode; -}; - -static const struct wcd9335_slim_ch wcd9335_rx_chs[WCD9335_RX_MAX] = { - WCD9335_SLIM_RX_CH(0), /* 16 */ - WCD9335_SLIM_RX_CH(1), /* 17 */ - WCD9335_SLIM_RX_CH(2), - WCD9335_SLIM_RX_CH(3), - WCD9335_SLIM_RX_CH(4), - WCD9335_SLIM_RX_CH(5), - WCD9335_SLIM_RX_CH(6), - WCD9335_SLIM_RX_CH(7), - WCD9335_SLIM_RX_CH(8), - WCD9335_SLIM_RX_CH(9), - WCD9335_SLIM_RX_CH(10), - WCD9335_SLIM_RX_CH(11), - WCD9335_SLIM_RX_CH(12), -}; - -struct interp_sample_rate { - int rate; - int rate_val; -}; - -static struct interp_sample_rate int_mix_rate_val[] = { - {48000, 0x4}, /* 48K */ - {96000, 0x5}, /* 96K */ - {192000, 0x6}, /* 192K */ -}; - -static struct interp_sample_rate int_prim_rate_val[] = { - {8000, 0x0}, /* 8K */ - {16000, 0x1}, /* 16K */ - {24000, -EINVAL},/* 24K */ - {32000, 0x3}, /* 32K */ - {48000, 0x4}, /* 48K */ - {96000, 0x5}, /* 96K */ - {192000, 0x6}, /* 192K */ - {384000, 0x7}, /* 384K */ - {44100, 0x8}, /* 44.1K */ -}; - -struct wcd9335_reg_mask_val { - u16 reg; - u8 mask; - u8 val; -}; - -static const struct wcd9335_reg_mask_val wcd9335_codec_reg_init_val_2_0[] = { - {WCD9335_RCO_CTRL_2, 0x0F, 0x08}, - {WCD9335_RX_BIAS_FLYB_MID_RST, 0xF0, 0x10}, - {WCD9335_FLYBACK_CTRL_1, 0x20, 0x20}, - {WCD9335_HPH_OCP_CTL, 0xFF, 0x5A}, - {WCD9335_HPH_L_TEST, 0x01, 0x01}, - {WCD9335_HPH_R_TEST, 0x01, 0x01}, - {WCD9335_CDC_BOOST0_BOOST_CFG1, 0x3F, 0x12}, - {WCD9335_CDC_BOOST0_BOOST_CFG2, 0x1C, 0x08}, - {WCD9335_CDC_COMPANDER7_CTL7, 0x1E, 0x18}, - {WCD9335_CDC_BOOST1_BOOST_CFG1, 0x3F, 0x12}, - {WCD9335_CDC_BOOST1_BOOST_CFG2, 0x1C, 0x08}, - {WCD9335_CDC_COMPANDER8_CTL7, 0x1E, 0x18}, - {WCD9335_CDC_TX0_TX_PATH_SEC7, 0xFF, 0x45}, - {WCD9335_CDC_RX0_RX_PATH_SEC0, 0xFC, 0xF4}, - {WCD9335_HPH_REFBUFF_LP_CTL, 0x08, 0x08}, - {WCD9335_HPH_REFBUFF_LP_CTL, 0x06, 0x02}, -}; - -static const struct wcd9335_reg_mask_val wcd9335_codec_reg_init_common_val[] = { - /* Rbuckfly/R_EAR(32) */ - {WCD9335_CDC_CLSH_K2_MSB, 0x0F, 0x00}, - {WCD9335_CDC_CLSH_K2_LSB, 0xFF, 0x60}, - {WCD9335_CPE_SS_DMIC_CFG, 0x80, 0x00}, - {WCD9335_CDC_BOOST0_BOOST_CTL, 0x70, 0x50}, - {WCD9335_CDC_BOOST1_BOOST_CTL, 0x70, 0x50}, - {WCD9335_CDC_RX7_RX_PATH_CFG1, 0x08, 0x08}, - {WCD9335_CDC_RX8_RX_PATH_CFG1, 0x08, 0x08}, - {WCD9335_ANA_LO_1_2, 0x3C, 0X3C}, - {WCD9335_DIFF_LO_COM_SWCAP_REFBUF_FREQ, 0x70, 0x00}, - {WCD9335_DIFF_LO_COM_PA_FREQ, 0x70, 0x40}, - {WCD9335_SOC_MAD_AUDIO_CTL_2, 0x03, 0x03}, - {WCD9335_CDC_TOP_TOP_CFG1, 0x02, 0x02}, - {WCD9335_CDC_TOP_TOP_CFG1, 0x01, 0x01}, - {WCD9335_EAR_CMBUFF, 0x08, 0x00}, - {WCD9335_CDC_TX9_SPKR_PROT_PATH_CFG0, 0x01, 0x01}, - {WCD9335_CDC_TX10_SPKR_PROT_PATH_CFG0, 0x01, 0x01}, - {WCD9335_CDC_TX11_SPKR_PROT_PATH_CFG0, 0x01, 0x01}, - {WCD9335_CDC_TX12_SPKR_PROT_PATH_CFG0, 0x01, 0x01}, - {WCD9335_CDC_COMPANDER7_CTL3, 0x80, 0x80}, - {WCD9335_CDC_COMPANDER8_CTL3, 0x80, 0x80}, - {WCD9335_CDC_COMPANDER7_CTL7, 0x01, 0x01}, - {WCD9335_CDC_COMPANDER8_CTL7, 0x01, 0x01}, - {WCD9335_CDC_RX0_RX_PATH_CFG0, 0x01, 0x01}, - {WCD9335_CDC_RX1_RX_PATH_CFG0, 0x01, 0x01}, - {WCD9335_CDC_RX2_RX_PATH_CFG0, 0x01, 0x01}, - {WCD9335_CDC_RX3_RX_PATH_CFG0, 0x01, 0x01}, - {WCD9335_CDC_RX4_RX_PATH_CFG0, 0x01, 0x01}, - {WCD9335_CDC_RX5_RX_PATH_CFG0, 0x01, 0x01}, - {WCD9335_CDC_RX6_RX_PATH_CFG0, 0x01, 0x01}, - {WCD9335_CDC_RX7_RX_PATH_CFG0, 0x01, 0x01}, - {WCD9335_CDC_RX8_RX_PATH_CFG0, 0x01, 0x01}, - {WCD9335_CDC_RX0_RX_PATH_MIX_CFG, 0x01, 0x01}, - {WCD9335_CDC_RX1_RX_PATH_MIX_CFG, 0x01, 0x01}, - {WCD9335_CDC_RX2_RX_PATH_MIX_CFG, 0x01, 0x01}, - {WCD9335_CDC_RX3_RX_PATH_MIX_CFG, 0x01, 0x01}, - {WCD9335_CDC_RX4_RX_PATH_MIX_CFG, 0x01, 0x01}, - {WCD9335_CDC_RX5_RX_PATH_MIX_CFG, 0x01, 0x01}, - {WCD9335_CDC_RX6_RX_PATH_MIX_CFG, 0x01, 0x01}, - {WCD9335_CDC_RX7_RX_PATH_MIX_CFG, 0x01, 0x01}, - {WCD9335_CDC_RX8_RX_PATH_MIX_CFG, 0x01, 0x01}, - {WCD9335_VBADC_IBIAS_FE, 0x0C, 0x08}, -}; - -static int wcd9335_set_mix_interpolator_rate(struct snd_soc_dai *dai, - int rate_val, - u32 rate) -{ - struct snd_soc_component *component = dai->component; - struct wcd9335_codec *wcd = dev_get_drvdata(component->dev); - struct wcd9335_slim_ch *ch; - int val, j; - - list_for_each_entry(ch, &wcd->dai[dai->id].slim_ch_list, list) { - for (j = 0; j < WCD9335_NUM_INTERPOLATORS; j++) { - val = snd_soc_component_read32(component, - WCD9335_CDC_RX_INP_MUX_RX_INT_CFG1(j)) & - WCD9335_CDC_RX_INP_MUX_RX_INT_SEL_MASK; - - if (val == (ch->shift + INTn_2_INP_SEL_RX0)) - snd_soc_component_update_bits(component, - WCD9335_CDC_RX_PATH_MIX_CTL(j), - WCD9335_CDC_MIX_PCM_RATE_MASK, - rate_val); - } - } - - return 0; -} - -static int wcd9335_set_prim_interpolator_rate(struct snd_soc_dai *dai, - u8 rate_val, - u32 rate) -{ - struct snd_soc_component *comp = dai->component; - struct wcd9335_codec *wcd = dev_get_drvdata(comp->dev); - struct wcd9335_slim_ch *ch; - u8 cfg0, cfg1, inp0_sel, inp1_sel, inp2_sel; - int inp, j; - - list_for_each_entry(ch, &wcd->dai[dai->id].slim_ch_list, list) { - inp = ch->shift + INTn_1_MIX_INP_SEL_RX0; - /* - * Loop through all interpolator MUX inputs and find out - * to which interpolator input, the slim rx port - * is connected - */ - for (j = 0; j < WCD9335_NUM_INTERPOLATORS; j++) { - cfg0 = snd_soc_component_read32(comp, - WCD9335_CDC_RX_INP_MUX_RX_INT_CFG0(j)); - cfg1 = snd_soc_component_read32(comp, - WCD9335_CDC_RX_INP_MUX_RX_INT_CFG1(j)); - - inp0_sel = cfg0 & WCD9335_CDC_RX_INP_MUX_RX_INT_SEL_MASK; - inp1_sel = (cfg0 >> 4) & WCD9335_CDC_RX_INP_MUX_RX_INT_SEL_MASK; - inp2_sel = (cfg1 >> 4) & WCD9335_CDC_RX_INP_MUX_RX_INT_SEL_MASK; - - if ((inp0_sel == inp) || (inp1_sel == inp) || - (inp2_sel == inp)) { - /* rate is in Hz */ - if ((j == 0) && (rate == 44100)) - dev_info(wcd->dev, - "Cannot set 44.1KHz on INT0\n"); - else - snd_soc_component_update_bits(comp, - WCD9335_CDC_RX_PATH_CTL(j), - WCD9335_CDC_MIX_PCM_RATE_MASK, - rate_val); - } - } - } - - return 0; -} - -static int wcd9335_set_interpolator_rate(struct snd_soc_dai *dai, u32 rate) -{ - int i; - - /* set mixing path rate */ - for (i = 0; i < ARRAY_SIZE(int_mix_rate_val); i++) { - if (rate == int_mix_rate_val[i].rate) { - wcd9335_set_mix_interpolator_rate(dai, - int_mix_rate_val[i].rate_val, rate); - break; - } - } - - /* set primary path sample rate */ - for (i = 0; i < ARRAY_SIZE(int_prim_rate_val); i++) { - if (rate == int_prim_rate_val[i].rate) { - wcd9335_set_prim_interpolator_rate(dai, - int_prim_rate_val[i].rate_val, rate); - break; - } - } - - return 0; -} - -static int wcd9335_slim_set_hw_params(struct wcd9335_codec *wcd, - struct wcd_slim_codec_dai_data *dai_data, - int direction) -{ - struct list_head *slim_ch_list = &dai_data->slim_ch_list; - struct slim_stream_config *cfg = &dai_data->sconfig; - struct wcd9335_slim_ch *ch; - u16 payload = 0; - int ret, i; - - cfg->ch_count = 0; - cfg->direction = direction; - cfg->port_mask = 0; - - /* Configure slave interface device */ - list_for_each_entry(ch, slim_ch_list, list) { - cfg->ch_count++; - payload |= 1 << ch->shift; - cfg->port_mask |= BIT(ch->port); - } - - cfg->chs = kcalloc(cfg->ch_count, sizeof(unsigned int), GFP_KERNEL); - if (!cfg->chs) - return -ENOMEM; - - i = 0; - list_for_each_entry(ch, slim_ch_list, list) { - cfg->chs[i++] = ch->ch_num; - if (direction == SNDRV_PCM_STREAM_PLAYBACK) { - /* write to interface device */ - ret = regmap_write(wcd->if_regmap, - WCD9335_SLIM_PGD_RX_PORT_MULTI_CHNL_0(ch->port), - payload); - - if (ret < 0) - goto err; - - /* configure the slave port for water mark and enable*/ - ret = regmap_write(wcd->if_regmap, - WCD9335_SLIM_PGD_RX_PORT_CFG(ch->port), - WCD9335_SLIM_WATER_MARK_VAL); - if (ret < 0) - goto err; - } - } - - dai_data->sruntime = slim_stream_allocate(wcd->slim, "WCD9335-SLIM"); - slim_stream_prepare(dai_data->sruntime, cfg); - - return 0; - -err: - dev_err(wcd->dev, "Error Setting slim hw params\n"); - kfree(cfg->chs); - cfg->chs = NULL; - - return ret; -} - -static int wcd9335_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params, - struct snd_soc_dai *dai) -{ - struct wcd9335_codec *wcd; - int ret; - - wcd = snd_soc_component_get_drvdata(dai->component); - - switch (substream->stream) { - case SNDRV_PCM_STREAM_PLAYBACK: - ret = wcd9335_set_interpolator_rate(dai, params_rate(params)); - if (ret) { - dev_err(wcd->dev, "cannot set sample rate: %u\n", - params_rate(params)); - return ret; - } - switch (params_width(params)) { - case 16 ... 24: - wcd->dai[dai->id].sconfig.bps = params_width(params); - break; - default: - dev_err(wcd->dev, "%s: Invalid format 0x%x\n", - __func__, params_width(params)); - return -EINVAL; - } - break; - default: - dev_err(wcd->dev, "Invalid stream type %d\n", - substream->stream); - return -EINVAL; - }; - - wcd->dai[dai->id].sconfig.rate = params_rate(params); - wcd9335_slim_set_hw_params(wcd, &wcd->dai[dai->id], substream->stream); - - return 0; -} - -static int wcd9335_prepare(struct snd_pcm_substream *substream, - struct snd_soc_dai *dai) -{ - struct wcd_slim_codec_dai_data *dai_data; - struct wcd9335_codec *wcd; - - wcd = snd_soc_component_get_drvdata(dai->component); - dai_data = &wcd->dai[dai->id]; - slim_stream_enable(dai_data->sruntime); - - return 0; -} - -static int wcd9335_set_channel_map(struct snd_soc_dai *dai, - unsigned int tx_num, unsigned int *tx_slot, - unsigned int rx_num, unsigned int *rx_slot) -{ - struct wcd9335_codec *wcd; - int i; - - wcd = snd_soc_component_get_drvdata(dai->component); - - if (!tx_slot || !rx_slot) { - dev_err(wcd->dev, "Invalid tx_slot=%p, rx_slot=%p\n", - tx_slot, rx_slot); - return -EINVAL; - } - - if (wcd->rx_chs) { - wcd->num_rx_port = rx_num; - for (i = 0; i < rx_num; i++) { - wcd->rx_chs[i].ch_num = rx_slot[i]; - INIT_LIST_HEAD(&wcd->rx_chs[i].list); - } - } - - return 0; -} - -static int wcd9335_get_channel_map(struct snd_soc_dai *dai, - unsigned int *tx_num, unsigned int *tx_slot, - unsigned int *rx_num, unsigned int *rx_slot) -{ - struct wcd9335_slim_ch *ch; - struct wcd9335_codec *wcd; - int i = 0; - - wcd = snd_soc_component_get_drvdata(dai->component); - - switch (dai->id) { - case AIF1_PB: - case AIF2_PB: - case AIF3_PB: - case AIF4_PB: - if (!rx_slot || !rx_num) { - dev_err(wcd->dev, "Invalid rx_slot %p or rx_num %p\n", - rx_slot, rx_num); - return -EINVAL; - } - - list_for_each_entry(ch, &wcd->dai[dai->id].slim_ch_list, list) - rx_slot[i++] = ch->ch_num; - - *rx_num = i; - break; - default: - dev_err(wcd->dev, "Invalid DAI ID %x\n", dai->id); - break; - } - - return 0; -} - -static struct snd_soc_dai_ops wcd9335_dai_ops = { - .hw_params = wcd9335_hw_params, - .prepare = wcd9335_prepare, - .set_channel_map = wcd9335_set_channel_map, - .get_channel_map = wcd9335_get_channel_map, -}; - -static struct snd_soc_dai_driver wcd9335_slim_dais[] = { - [0] = { - .name = "wcd9335_rx1", - .id = AIF1_PB, - .playback = { - .stream_name = "AIF1 Playback", - .rates = WCD9335_RATES_MASK | WCD9335_FRAC_RATES_MASK, - .formats = WCD9335_FORMATS_S16_S24_LE, - .rate_max = 192000, - .rate_min = 8000, - .channels_min = 1, - .channels_max = 2, - }, - .ops = &wcd9335_dai_ops, - }, - [1] = { - .name = "wcd9335_tx1", - .id = AIF1_CAP, - .capture = { - .stream_name = "AIF1 Capture", - .rates = WCD9335_RATES_MASK, - .formats = SNDRV_PCM_FMTBIT_S16_LE, - .rate_min = 8000, - .rate_max = 192000, - .channels_min = 1, - .channels_max = 4, - }, - .ops = &wcd9335_dai_ops, - }, - [2] = { - .name = "wcd9335_rx2", - .id = AIF2_PB, - .playback = { - .stream_name = "AIF2 Playback", - .rates = WCD9335_RATES_MASK | WCD9335_FRAC_RATES_MASK, - .formats = WCD9335_FORMATS_S16_S24_LE, - .rate_min = 8000, - .rate_max = 192000, - .channels_min = 1, - .channels_max = 2, - }, - .ops = &wcd9335_dai_ops, - }, - [3] = { - .name = "wcd9335_tx2", - .id = AIF2_CAP, - .capture = { - .stream_name = "AIF2 Capture", - .rates = WCD9335_RATES_MASK, - .formats = SNDRV_PCM_FMTBIT_S16_LE, - .rate_min = 8000, - .rate_max = 192000, - .channels_min = 1, - .channels_max = 4, - }, - .ops = &wcd9335_dai_ops, - }, - [4] = { - .name = "wcd9335_rx3", - .id = AIF3_PB, - .playback = { - .stream_name = "AIF3 Playback", - .rates = WCD9335_RATES_MASK | WCD9335_FRAC_RATES_MASK, - .formats = WCD9335_FORMATS_S16_S24_LE, - .rate_min = 8000, - .rate_max = 192000, - .channels_min = 1, - .channels_max = 2, - }, - .ops = &wcd9335_dai_ops, - }, - [5] = { - .name = "wcd9335_tx3", - .id = AIF3_CAP, - .capture = { - .stream_name = "AIF3 Capture", - .rates = WCD9335_RATES_MASK, - .formats = SNDRV_PCM_FMTBIT_S16_LE, - .rate_min = 8000, - .rate_max = 192000, - .channels_min = 1, - .channels_max = 4, - }, - .ops = &wcd9335_dai_ops, - }, - [6] = { - .name = "wcd9335_rx4", - .id = AIF4_PB, - .playback = { - .stream_name = "AIF4 Playback", - .rates = WCD9335_RATES_MASK | WCD9335_FRAC_RATES_MASK, - .formats = WCD9335_FORMATS_S16_S24_LE, - .rate_min = 8000, - .rate_max = 192000, - .channels_min = 1, - .channels_max = 2, - }, - .ops = &wcd9335_dai_ops, - }, -}; - -static irqreturn_t wcd9335_slimbus_irq(int irq, void *data) -{ - struct wcd9335_codec *wcd = data; - unsigned long status = 0; - int i, j, port_id; - unsigned int val, int_val = 0; - bool tx; - unsigned short reg = 0; - - for (i = WCD9335_SLIM_PGD_PORT_INT_STATUS_RX_0, j = 0; - i <= WCD9335_SLIM_PGD_PORT_INT_STATUS_TX_1; i++, j++) { - regmap_read(wcd->if_regmap, i, &val); - status |= ((u32)val << (8 * j)); - } - - for_each_set_bit(j, &status, 32) { - tx = (j >= 16 ? true : false); - port_id = (tx ? j - 16 : j); - regmap_read(wcd->if_regmap, - WCD9335_SLIM_PGD_PORT_INT_RX_SOURCE0 + j, &val); - if (val) { - if (!tx) - reg = WCD9335_SLIM_PGD_PORT_INT_EN0 + - (port_id / 8); - else - reg = WCD9335_SLIM_PGD_PORT_INT_TX_EN0 + - (port_id / 8); - regmap_read( - wcd->if_regmap, reg, &int_val); - /* - * Ignore interrupts for ports for which the - * interrupts are not specifically enabled. - */ - if (!(int_val & (1 << (port_id % 8)))) - continue; - } - if (val & WCD9335_SLIM_IRQ_OVERFLOW) - dev_err_ratelimited(wcd->dev, - "%s: overflow error on %s port %d, value %x\n", - __func__, (tx ? "TX" : "RX"), port_id, val); - if (val & WCD9335_SLIM_IRQ_UNDERFLOW) - dev_err_ratelimited(wcd->dev, - "%s: underflow error on %s port %d, value %x\n", - __func__, (tx ? "TX" : "RX"), port_id, val); - if ((val & WCD9335_SLIM_IRQ_OVERFLOW) || - (val & WCD9335_SLIM_IRQ_UNDERFLOW)) { - if (!tx) - reg = WCD9335_SLIM_PGD_PORT_INT_EN0 + - (port_id / 8); - else - reg = WCD9335_SLIM_PGD_PORT_INT_TX_EN0 + - (port_id / 8); - regmap_read( - wcd->if_regmap, reg, &int_val); - if (int_val & (1 << (port_id % 8))) { - int_val = int_val ^ (1 << (port_id % 8)); - regmap_write(wcd->if_regmap, - reg, int_val); - } - } - - regmap_write(wcd->if_regmap, - WCD9335_SLIM_PGD_PORT_INT_CLR_RX_0 + (j / 8), - BIT(j % 8)); - } - - return IRQ_HANDLED; -} - -static int wcd9335_setup_irqs(struct wcd9335_codec *wcd) -{ - int slim_irq = regmap_irq_get_virq(wcd->irq_data, WCD9335_IRQ_SLIMBUS); - int i, ret = 0; - - ret = request_threaded_irq(slim_irq, NULL, wcd9335_slimbus_irq, - IRQF_TRIGGER_RISING, "SLIMBus Slave", wcd); - if (ret) { - dev_err(wcd->dev, "Failed to request SLIMBUS irq\n"); - return ret; - } - - /* enable interrupts on all slave ports */ - for (i = 0; i < WCD9335_SLIM_NUM_PORT_REG; i++) - regmap_write(wcd->if_regmap, WCD9335_SLIM_PGD_PORT_INT_EN0 + i, - 0xFF); - - return ret; -} - -static void wcd9335_cdc_sido_ccl_enable(struct wcd9335_codec *wcd, - bool ccl_flag) -{ - struct snd_soc_component *comp = wcd->component; - - if (ccl_flag) { - if (++wcd->sido_ccl_cnt == 1) - snd_soc_component_write(comp, WCD9335_SIDO_SIDO_CCL_10, - WCD9335_SIDO_SIDO_CCL_DEF_VALUE); - } else { - if (wcd->sido_ccl_cnt == 0) { - dev_err(wcd->dev, "sido_ccl already disabled\n"); - return; - } - if (--wcd->sido_ccl_cnt == 0) - snd_soc_component_write(comp, WCD9335_SIDO_SIDO_CCL_10, - WCD9335_SIDO_SIDO_CCL_10_ICHARG_PWR_SEL_C320FF); - } -} - -static int wcd9335_enable_master_bias(struct wcd9335_codec *wcd) -{ - wcd->master_bias_users++; - if (wcd->master_bias_users == 1) { - regmap_update_bits(wcd->regmap, WCD9335_ANA_BIAS, - WCD9335_ANA_BIAS_EN_MASK, - WCD9335_ANA_BIAS_ENABLE); - regmap_update_bits(wcd->regmap, WCD9335_ANA_BIAS, - WCD9335_ANA_BIAS_PRECHRG_EN_MASK, - WCD9335_ANA_BIAS_PRECHRG_ENABLE); - /* - * 1ms delay is required after pre-charge is enabled - * as per HW requirement - */ - usleep_range(1000, 1100); - regmap_update_bits(wcd->regmap, WCD9335_ANA_BIAS, - WCD9335_ANA_BIAS_PRECHRG_EN_MASK, - WCD9335_ANA_BIAS_PRECHRG_DISABLE); - regmap_update_bits(wcd->regmap, WCD9335_ANA_BIAS, - WCD9335_ANA_BIAS_PRECHRG_CTL_MODE, - WCD9335_ANA_BIAS_PRECHRG_CTL_MODE_MANUAL); - } - - return 0; -} - -static int wcd9335_enable_mclk(struct wcd9335_codec *wcd) -{ - /* Enable mclk requires master bias to be enabled first */ - if (wcd->master_bias_users <= 0) - return -EINVAL; - - if (((wcd->clk_mclk_users == 0) && (wcd->clk_type == WCD_CLK_MCLK)) || - ((wcd->clk_mclk_users > 0) && (wcd->clk_type != WCD_CLK_MCLK))) { - dev_err(wcd->dev, "Error enabling MCLK, clk_type: %d\n", - wcd->clk_type); - return -EINVAL; - } - - if (++wcd->clk_mclk_users == 1) { - regmap_update_bits(wcd->regmap, WCD9335_ANA_CLK_TOP, - WCD9335_ANA_CLK_EXT_CLKBUF_EN_MASK, - WCD9335_ANA_CLK_EXT_CLKBUF_ENABLE); - regmap_update_bits(wcd->regmap, WCD9335_ANA_CLK_TOP, - WCD9335_ANA_CLK_MCLK_SRC_MASK, - WCD9335_ANA_CLK_MCLK_SRC_EXTERNAL); - regmap_update_bits(wcd->regmap, WCD9335_ANA_CLK_TOP, - WCD9335_ANA_CLK_MCLK_EN_MASK, - WCD9335_ANA_CLK_MCLK_ENABLE); - regmap_update_bits(wcd->regmap, - WCD9335_CDC_CLK_RST_CTRL_FS_CNT_CONTROL, - WCD9335_CDC_CLK_RST_CTRL_FS_CNT_EN_MASK, - WCD9335_CDC_CLK_RST_CTRL_FS_CNT_ENABLE); - regmap_update_bits(wcd->regmap, - WCD9335_CDC_CLK_RST_CTRL_MCLK_CONTROL, - WCD9335_CDC_CLK_RST_CTRL_MCLK_EN_MASK, - WCD9335_CDC_CLK_RST_CTRL_MCLK_ENABLE); - /* - * 10us sleep is required after clock is enabled - * as per HW requirement - */ - usleep_range(10, 15); - } - - wcd->clk_type = WCD_CLK_MCLK; - - return 0; -} - -static int wcd9335_disable_mclk(struct wcd9335_codec *wcd) -{ - if (wcd->clk_mclk_users <= 0) - return -EINVAL; - - if (--wcd->clk_mclk_users == 0) { - if (wcd->clk_rco_users > 0) { - /* MCLK to RCO switch */ - regmap_update_bits(wcd->regmap, WCD9335_ANA_CLK_TOP, - WCD9335_ANA_CLK_MCLK_SRC_MASK, - WCD9335_ANA_CLK_MCLK_SRC_RCO); - wcd->clk_type = WCD_CLK_RCO; - } else { - regmap_update_bits(wcd->regmap, WCD9335_ANA_CLK_TOP, - WCD9335_ANA_CLK_MCLK_EN_MASK, - WCD9335_ANA_CLK_MCLK_DISABLE); - wcd->clk_type = WCD_CLK_OFF; - } - - regmap_update_bits(wcd->regmap, WCD9335_ANA_CLK_TOP, - WCD9335_ANA_CLK_EXT_CLKBUF_EN_MASK, - WCD9335_ANA_CLK_EXT_CLKBUF_DISABLE); - } - - return 0; -} - -static int wcd9335_disable_master_bias(struct wcd9335_codec *wcd) -{ - if (wcd->master_bias_users <= 0) - return -EINVAL; - - wcd->master_bias_users--; - if (wcd->master_bias_users == 0) { - regmap_update_bits(wcd->regmap, WCD9335_ANA_BIAS, - WCD9335_ANA_BIAS_EN_MASK, - WCD9335_ANA_BIAS_DISABLE); - regmap_update_bits(wcd->regmap, WCD9335_ANA_BIAS, - WCD9335_ANA_BIAS_PRECHRG_CTL_MODE, - WCD9335_ANA_BIAS_PRECHRG_CTL_MODE_MANUAL); - } - return 0; -} - -static int wcd9335_cdc_req_mclk_enable(struct wcd9335_codec *wcd, - bool enable) -{ - int ret = 0; - - if (enable) { - wcd9335_cdc_sido_ccl_enable(wcd, true); - ret = clk_prepare_enable(wcd->mclk); - if (ret) { - dev_err(wcd->dev, "%s: ext clk enable failed\n", - __func__); - goto err; - } - /* get BG */ - wcd9335_enable_master_bias(wcd); - /* get MCLK */ - wcd9335_enable_mclk(wcd); - - } else { - /* put MCLK */ - wcd9335_disable_mclk(wcd); - /* put BG */ - wcd9335_disable_master_bias(wcd); - clk_disable_unprepare(wcd->mclk); - wcd9335_cdc_sido_ccl_enable(wcd, false); - } -err: - return ret; -} - -static void wcd9335_codec_apply_sido_voltage(struct wcd9335_codec *wcd, - enum wcd9335_sido_voltage req_mv) -{ - struct snd_soc_component *comp = wcd->component; - int vout_d_val; - - if (req_mv == wcd->sido_voltage) - return; - - /* compute the vout_d step value */ - vout_d_val = WCD9335_CALCULATE_VOUT_D(req_mv) & - WCD9335_ANA_BUCK_VOUT_MASK; - snd_soc_component_write(comp, WCD9335_ANA_BUCK_VOUT_D, vout_d_val); - snd_soc_component_update_bits(comp, WCD9335_ANA_BUCK_CTL, - WCD9335_ANA_BUCK_CTL_RAMP_START_MASK, - WCD9335_ANA_BUCK_CTL_RAMP_START_ENABLE); - - /* 1 msec sleep required after SIDO Vout_D voltage change */ - usleep_range(1000, 1100); - wcd->sido_voltage = req_mv; - snd_soc_component_update_bits(comp, WCD9335_ANA_BUCK_CTL, - WCD9335_ANA_BUCK_CTL_RAMP_START_MASK, - WCD9335_ANA_BUCK_CTL_RAMP_START_DISABLE); -} - -static int wcd9335_codec_update_sido_voltage(struct wcd9335_codec *wcd, - enum wcd9335_sido_voltage req_mv) -{ - int ret = 0; - - /* enable mclk before setting SIDO voltage */ - ret = wcd9335_cdc_req_mclk_enable(wcd, true); - if (ret) { - dev_err(wcd->dev, "Ext clk enable failed\n"); - goto err; - } - - wcd9335_codec_apply_sido_voltage(wcd, req_mv); - wcd9335_cdc_req_mclk_enable(wcd, false); - -err: - return ret; -} - -static int _wcd9335_codec_enable_mclk(struct snd_soc_component *component, - int enable) -{ - struct wcd9335_codec *wcd = dev_get_drvdata(component->dev); - int ret; - - if (enable) { - ret = wcd9335_cdc_req_mclk_enable(wcd, true); - if (ret) - return ret; - - wcd9335_codec_apply_sido_voltage(wcd, - SIDO_VOLTAGE_NOMINAL_MV); - } else { - wcd9335_codec_update_sido_voltage(wcd, - wcd->sido_voltage); - wcd9335_cdc_req_mclk_enable(wcd, false); - } - - return 0; -} - -static void wcd9335_enable_sido_buck(struct snd_soc_component *component) -{ - struct wcd9335_codec *wcd = dev_get_drvdata(component->dev); - - snd_soc_component_update_bits(component, WCD9335_ANA_RCO, - WCD9335_ANA_RCO_BG_EN_MASK, - WCD9335_ANA_RCO_BG_ENABLE); - snd_soc_component_update_bits(component, WCD9335_ANA_BUCK_CTL, - WCD9335_ANA_BUCK_CTL_VOUT_D_IREF_MASK, - WCD9335_ANA_BUCK_CTL_VOUT_D_IREF_EXT); - /* 100us sleep needed after IREF settings */ - usleep_range(100, 110); - snd_soc_component_update_bits(component, WCD9335_ANA_BUCK_CTL, - WCD9335_ANA_BUCK_CTL_VOUT_D_VREF_MASK, - WCD9335_ANA_BUCK_CTL_VOUT_D_VREF_EXT); - /* 100us sleep needed after VREF settings */ - usleep_range(100, 110); - wcd->sido_input_src = SIDO_SOURCE_RCO_BG; -} - -static int wcd9335_enable_efuse_sensing(struct snd_soc_component *comp) -{ - _wcd9335_codec_enable_mclk(comp, true); - snd_soc_component_update_bits(comp, - WCD9335_CHIP_TIER_CTRL_EFUSE_CTL, - WCD9335_CHIP_TIER_CTRL_EFUSE_EN_MASK, - WCD9335_CHIP_TIER_CTRL_EFUSE_ENABLE); - /* - * 5ms sleep required after enabling efuse control - * before checking the status. - */ - usleep_range(5000, 5500); - - if (!(snd_soc_component_read32(comp, - WCD9335_CHIP_TIER_CTRL_EFUSE_STATUS) & - WCD9335_CHIP_TIER_CTRL_EFUSE_EN_MASK)) - WARN(1, "%s: Efuse sense is not complete\n", __func__); - - wcd9335_enable_sido_buck(comp); - _wcd9335_codec_enable_mclk(comp, false); - - return 0; -} - -static void wcd9335_codec_init(struct snd_soc_component *component) -{ - struct wcd9335_codec *wcd = dev_get_drvdata(component->dev); - int i; - - /* ungate MCLK and set clk rate */ - regmap_update_bits(wcd->regmap, WCD9335_CODEC_RPM_CLK_GATE, - WCD9335_CODEC_RPM_CLK_GATE_MCLK_GATE_MASK, 0); - - regmap_update_bits(wcd->regmap, WCD9335_CODEC_RPM_CLK_MCLK_CFG, - WCD9335_CODEC_RPM_CLK_MCLK_CFG_MCLK_MASK, - WCD9335_CODEC_RPM_CLK_MCLK_CFG_9P6MHZ); - - for (i = 0; i < ARRAY_SIZE(wcd9335_codec_reg_init_common_val); i++) - snd_soc_component_update_bits(component, - wcd9335_codec_reg_init_common_val[i].reg, - wcd9335_codec_reg_init_common_val[i].mask, - wcd9335_codec_reg_init_common_val[i].val); - - if (WCD9335_IS_2_0(wcd->version)) { - for (i = 0; i < ARRAY_SIZE(wcd9335_codec_reg_init_val_2_0); i++) - snd_soc_component_update_bits(component, - wcd9335_codec_reg_init_val_2_0[i].reg, - wcd9335_codec_reg_init_val_2_0[i].mask, - wcd9335_codec_reg_init_val_2_0[i].val); - } - - wcd9335_enable_efuse_sensing(component); -} - -static int wcd9335_codec_probe(struct snd_soc_component *component) -{ - struct wcd9335_codec *wcd = dev_get_drvdata(component->dev); - int i; - - snd_soc_component_init_regmap(component, wcd->regmap); - wcd->component = component; - - wcd9335_codec_init(component); - - for (i = 0; i < NUM_CODEC_DAIS; i++) - INIT_LIST_HEAD(&wcd->dai[i].slim_ch_list); - - return wcd9335_setup_irqs(wcd); -} - -static void wcd9335_codec_remove(struct snd_soc_component *comp) -{ - struct wcd9335_codec *wcd = dev_get_drvdata(comp->dev); - - free_irq(regmap_irq_get_virq(wcd->irq_data, WCD9335_IRQ_SLIMBUS), wcd); -} - -static int wcd9335_codec_set_sysclk(struct snd_soc_component *comp, - int clk_id, int source, - unsigned int freq, int dir) -{ - struct wcd9335_codec *wcd = dev_get_drvdata(comp->dev); - - wcd->mclk_rate = freq; - - if (wcd->mclk_rate == WCD9335_MCLK_CLK_12P288MHZ) - snd_soc_component_update_bits(comp, - WCD9335_CODEC_RPM_CLK_MCLK_CFG, - WCD9335_CODEC_RPM_CLK_MCLK_CFG_MCLK_MASK, - WCD9335_CODEC_RPM_CLK_MCLK_CFG_12P288MHZ); - else if (wcd->mclk_rate == WCD9335_MCLK_CLK_9P6MHZ) - snd_soc_component_update_bits(comp, - WCD9335_CODEC_RPM_CLK_MCLK_CFG, - WCD9335_CODEC_RPM_CLK_MCLK_CFG_MCLK_MASK, - WCD9335_CODEC_RPM_CLK_MCLK_CFG_9P6MHZ); - - return clk_set_rate(wcd->mclk, freq); -} - -static const struct snd_soc_component_driver wcd9335_component_drv = { - .probe = wcd9335_codec_probe, - .remove = wcd9335_codec_remove, - .set_sysclk = wcd9335_codec_set_sysclk, -}; - -static int wcd9335_probe(struct platform_device *pdev) -{ - struct wcd9335 *pdata = dev_get_drvdata(pdev->dev.parent); - struct device *dev = &pdev->dev; - struct wcd9335_codec *wcd; - - wcd = devm_kzalloc(dev, sizeof(*wcd), GFP_KERNEL); - if (!wcd) - return -ENOMEM; - - dev_set_drvdata(dev, wcd); - - memcpy(wcd->rx_chs, wcd9335_rx_chs, sizeof(wcd9335_rx_chs)); - - wcd->regmap = pdata->regmap; - wcd->if_regmap = pdata->ifd_regmap; - wcd->slim = pdata->slim; - wcd->slim_ifd = pdata->slim_ifd; - wcd->irq_data = pdata->irq_data; - wcd->version = pdata->version; - wcd->intf_type = pdata->intf_type; - wcd->dev = dev; - wcd->mclk = pdata->mclk; - wcd->native_clk = pdata->native_clk; - wcd->sido_input_src = SIDO_SOURCE_INTERNAL; - wcd->sido_voltage = SIDO_VOLTAGE_NOMINAL_MV; - - return devm_snd_soc_register_component(dev, &wcd9335_component_drv, - wcd9335_slim_dais, - ARRAY_SIZE(wcd9335_slim_dais)); -} - -static struct platform_driver wcd9335_codec_driver = { - .probe = wcd9335_probe, - .driver = { - .name = "wcd9335-codec", - }, -}; -module_platform_driver(wcd9335_codec_driver); -MODULE_DESCRIPTION("WCD9335 Codec driver"); -MODULE_LICENSE("GPL v2"); -- cgit v1.2.3 From cca19f0b684f4ed6aabf6ad07ae3e15e77bfd78a Mon Sep 17 00:00:00 2001 From: Frederic Barrat Date: Tue, 31 Jul 2018 15:24:52 +0200 Subject: powerpc/64s/radix: Fix missing global invalidations when removing copro With the optimizations for TLB invalidation from commit 0cef77c7798a ("powerpc/64s/radix: flush remote CPUs out of single-threaded mm_cpumask"), the scope of a TLBI (global vs. local) can now be influenced by the value of the 'copros' counter of the memory context. When calling mm_context_remove_copro(), the 'copros' counter is decremented first before flushing. It may have the unintended side effect of sending local TLBIs when we explicitly need global invalidations in this case. Thus breaking any nMMU user in a bad and unpredictable way. Fix it by flushing first, before updating the 'copros' counter, so that invalidations will be global. Fixes: 0cef77c7798a ("powerpc/64s/radix: flush remote CPUs out of single-threaded mm_cpumask") Signed-off-by: Frederic Barrat Reviewed-by: Nicholas Piggin Tested-by: Vaibhav Jain Signed-off-by: Michael Ellerman --- arch/powerpc/include/asm/mmu_context.h | 33 +++++++++++++++++++++------------ 1 file changed, 21 insertions(+), 12 deletions(-) diff --git a/arch/powerpc/include/asm/mmu_context.h b/arch/powerpc/include/asm/mmu_context.h index 79d570cbf332..b2f89b621b15 100644 --- a/arch/powerpc/include/asm/mmu_context.h +++ b/arch/powerpc/include/asm/mmu_context.h @@ -143,24 +143,33 @@ static inline void mm_context_remove_copro(struct mm_struct *mm) { int c; - c = atomic_dec_if_positive(&mm->context.copros); - - /* Detect imbalance between add and remove */ - WARN_ON(c < 0); - /* - * Need to broadcast a global flush of the full mm before - * decrementing active_cpus count, as the next TLBI may be - * local and the nMMU and/or PSL need to be cleaned up. - * Should be rare enough so that it's acceptable. + * When removing the last copro, we need to broadcast a global + * flush of the full mm, as the next TLBI may be local and the + * nMMU and/or PSL need to be cleaned up. + * + * Both the 'copros' and 'active_cpus' counts are looked at in + * flush_all_mm() to determine the scope (local/global) of the + * TLBIs, so we need to flush first before decrementing + * 'copros'. If this API is used by several callers for the + * same context, it can lead to over-flushing. It's hopefully + * not common enough to be a problem. * * Skip on hash, as we don't know how to do the proper flush * for the time being. Invalidations will remain global if - * used on hash. + * used on hash. Note that we can't drop 'copros' either, as + * it could make some invalidations local with no flush + * in-between. */ - if (c == 0 && radix_enabled()) { + if (radix_enabled()) { flush_all_mm(mm); - dec_mm_active_cpus(mm); + + c = atomic_dec_if_positive(&mm->context.copros); + /* Detect imbalance between add and remove */ + WARN_ON(c < 0); + + if (c == 0) + dec_mm_active_cpus(mm); } } #else -- cgit v1.2.3 From 9fb4c2bf130b922c77c16a8368732699799c40de Mon Sep 17 00:00:00 2001 From: Akshu Agrawal Date: Wed, 1 Aug 2018 15:37:33 +0530 Subject: ASoC: soc-pcm: Use delay set in component pointer function Take into account the base delay set in pointer callback. There are cases where a pointer function populates runtime->delay, such as: ./sound/pci/hda/hda_controller.c ./sound/soc/intel/atom/sst-mfld-platform-pcm.c This delay was getting lost and was overwritten by delays from codec or cpu dai delay function if exposed. Now, Total delay = base delay + cpu_dai delay + codec_dai delay Signed-off-by: Akshu Agrawal Reviewed-by: Takashi Iwai Signed-off-by: Mark Brown --- sound/soc/soc-pcm.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c index 4019bc10897c..9833e53754cb 100644 --- a/sound/soc/soc-pcm.c +++ b/sound/soc/soc-pcm.c @@ -1179,6 +1179,9 @@ static snd_pcm_uframes_t soc_pcm_pointer(struct snd_pcm_substream *substream) snd_pcm_sframes_t codec_delay = 0; int i; + /* clearing the previous total delay */ + runtime->delay = 0; + for_each_rtdcom(rtd, rtdcom) { component = rtdcom->component; @@ -1190,6 +1193,8 @@ static snd_pcm_uframes_t soc_pcm_pointer(struct snd_pcm_substream *substream) offset = component->driver->ops->pointer(substream); break; } + /* base delay if assigned in pointer callback */ + delay = runtime->delay; if (cpu_dai->driver->ops->delay) delay += cpu_dai->driver->ops->delay(substream, cpu_dai); -- cgit v1.2.3 From 7e2556e40026a1b0c16f37446ab398d5a5a892e4 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 31 Jul 2018 06:30:54 -0700 Subject: bonding: avoid lockdep confusion in bond_get_stats() syzbot found that the following sequence produces a LOCKDEP splat [1] ip link add bond10 type bond ip link add bond11 type bond ip link set bond11 master bond10 To fix this, we can use the already provided nest_level. This patch also provides correct nesting for dev->addr_list_lock [1] WARNING: possible recursive locking detected 4.18.0-rc6+ #167 Not tainted -------------------------------------------- syz-executor751/4439 is trying to acquire lock: (____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: spin_lock include/linux/spinlock.h:310 [inline] (____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: bond_get_stats+0xb4/0x560 drivers/net/bonding/bond_main.c:3426 but task is already holding lock: (____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: spin_lock include/linux/spinlock.h:310 [inline] (____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: bond_get_stats+0xb4/0x560 drivers/net/bonding/bond_main.c:3426 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&bond->stats_lock)->rlock); lock(&(&bond->stats_lock)->rlock); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by syz-executor751/4439: #0: (____ptrval____) (rtnl_mutex){+.+.}, at: rtnl_lock+0x17/0x20 net/core/rtnetlink.c:77 #1: (____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: spin_lock include/linux/spinlock.h:310 [inline] #1: (____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: bond_get_stats+0xb4/0x560 drivers/net/bonding/bond_main.c:3426 #2: (____ptrval____) (rcu_read_lock){....}, at: bond_get_stats+0x0/0x560 include/linux/compiler.h:215 stack backtrace: CPU: 0 PID: 4439 Comm: syz-executor751 Not tainted 4.18.0-rc6+ #167 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113 print_deadlock_bug kernel/locking/lockdep.c:1765 [inline] check_deadlock kernel/locking/lockdep.c:1809 [inline] validate_chain kernel/locking/lockdep.c:2405 [inline] __lock_acquire.cold.64+0x1fb/0x486 kernel/locking/lockdep.c:3435 lock_acquire+0x1e4/0x540 kernel/locking/lockdep.c:3924 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x2a/0x40 kernel/locking/spinlock.c:144 spin_lock include/linux/spinlock.h:310 [inline] bond_get_stats+0xb4/0x560 drivers/net/bonding/bond_main.c:3426 dev_get_stats+0x10f/0x470 net/core/dev.c:8316 bond_get_stats+0x232/0x560 drivers/net/bonding/bond_main.c:3432 dev_get_stats+0x10f/0x470 net/core/dev.c:8316 rtnl_fill_stats+0x4d/0xac0 net/core/rtnetlink.c:1169 rtnl_fill_ifinfo+0x1aa6/0x3fb0 net/core/rtnetlink.c:1611 rtmsg_ifinfo_build_skb+0xc8/0x190 net/core/rtnetlink.c:3268 rtmsg_ifinfo_event.part.30+0x45/0xe0 net/core/rtnetlink.c:3300 rtmsg_ifinfo_event net/core/rtnetlink.c:3297 [inline] rtnetlink_event+0x144/0x170 net/core/rtnetlink.c:4716 notifier_call_chain+0x180/0x390 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1735 call_netdevice_notifiers net/core/dev.c:1753 [inline] netdev_features_change net/core/dev.c:1321 [inline] netdev_change_features+0xb3/0x110 net/core/dev.c:7759 bond_compute_features.isra.47+0x585/0xa50 drivers/net/bonding/bond_main.c:1120 bond_enslave+0x1b25/0x5da0 drivers/net/bonding/bond_main.c:1755 bond_do_ioctl+0x7cb/0xae0 drivers/net/bonding/bond_main.c:3528 dev_ifsioc+0x43c/0xb30 net/core/dev_ioctl.c:327 dev_ioctl+0x1b5/0xcc0 net/core/dev_ioctl.c:493 sock_do_ioctl+0x1d3/0x3e0 net/socket.c:992 sock_ioctl+0x30d/0x680 net/socket.c:1093 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:500 [inline] do_vfs_ioctl+0x1de/0x1720 fs/ioctl.c:684 ksys_ioctl+0xa9/0xd0 fs/ioctl.c:701 __do_sys_ioctl fs/ioctl.c:708 [inline] __se_sys_ioctl fs/ioctl.c:706 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:706 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x440859 Code: e8 2c af 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b 10 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffc51a92878 EFLAGS: 00000213 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000440859 RDX: 0000000020000040 RSI: 0000000000008990 RDI: 0000000000000003 RBP: 0000000000000000 R08: 00000000004002c8 R09: 00000000004002c8 R10: 00000000022d5880 R11: 0000000000000213 R12: 0000000000007390 R13: 0000000000401db0 R14: 0000000000000000 R15: 0000000000000000 Signed-off-by: Eric Dumazet Cc: Jay Vosburgh Cc: Veaceslav Falico Cc: Andy Gospodarek Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 63e3844c5bec..217b790d22ed 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1717,6 +1717,8 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev, goto err_upper_unlink; } + bond->nest_level = dev_get_nest_level(bond_dev) + 1; + /* If the mode uses primary, then the following is handled by * bond_change_active_slave(). */ @@ -1764,7 +1766,6 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev, if (bond_mode_can_use_xmit_hash(bond)) bond_update_slave_arr(bond, NULL); - bond->nest_level = dev_get_nest_level(bond_dev); netdev_info(bond_dev, "Enslaving %s as %s interface with %s link\n", slave_dev->name, @@ -3415,6 +3416,13 @@ static void bond_fold_stats(struct rtnl_link_stats64 *_res, } } +static int bond_get_nest_level(struct net_device *bond_dev) +{ + struct bonding *bond = netdev_priv(bond_dev); + + return bond->nest_level; +} + static void bond_get_stats(struct net_device *bond_dev, struct rtnl_link_stats64 *stats) { @@ -3423,7 +3431,7 @@ static void bond_get_stats(struct net_device *bond_dev, struct list_head *iter; struct slave *slave; - spin_lock(&bond->stats_lock); + spin_lock_nested(&bond->stats_lock, bond_get_nest_level(bond_dev)); memcpy(stats, &bond->bond_stats, sizeof(*stats)); rcu_read_lock(); @@ -4227,6 +4235,7 @@ static const struct net_device_ops bond_netdev_ops = { .ndo_neigh_setup = bond_neigh_setup, .ndo_vlan_rx_add_vid = bond_vlan_rx_add_vid, .ndo_vlan_rx_kill_vid = bond_vlan_rx_kill_vid, + .ndo_get_lock_subclass = bond_get_nest_level, #ifdef CONFIG_NET_POLL_CONTROLLER .ndo_netpoll_setup = bond_netpoll_setup, .ndo_netpoll_cleanup = bond_netpoll_cleanup, @@ -4725,6 +4734,7 @@ static int bond_init(struct net_device *bond_dev) if (!bond->wq) return -ENOMEM; + bond->nest_level = SINGLE_DEPTH_NESTING; netdev_lockdep_set_classes(bond_dev); list_add_tail(&bond->bond_list, &bn->dev_list); -- cgit v1.2.3 From b7d0f08e9129c45ed41bc0cfa8e77067881e45fd Mon Sep 17 00:00:00 2001 From: Jose Abreu Date: Tue, 31 Jul 2018 15:08:20 +0100 Subject: net: stmmac: Fix WoL for PCI-based setups WoL won't work in PCI-based setups because we are not saving the PCI EP state before entering suspend state and not allowing D3 wake. Fix this by using a wrapper around stmmac_{suspend/resume} which correctly sets the PCI EP state. Signed-off-by: Jose Abreu Cc: David S. Miller Cc: Joao Pinto Cc: Giuseppe Cavallaro Cc: Alexandre Torgue Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c | 40 ++++++++++++++++++++++-- 1 file changed, 38 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c index 8d375e51a526..6a393b16a1fc 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c @@ -257,7 +257,7 @@ static int stmmac_pci_probe(struct pci_dev *pdev, return -ENOMEM; /* Enable pci device */ - ret = pcim_enable_device(pdev); + ret = pci_enable_device(pdev); if (ret) { dev_err(&pdev->dev, "%s: ERROR: failed to enable device\n", __func__); @@ -300,9 +300,45 @@ static int stmmac_pci_probe(struct pci_dev *pdev, static void stmmac_pci_remove(struct pci_dev *pdev) { stmmac_dvr_remove(&pdev->dev); + pci_disable_device(pdev); } -static SIMPLE_DEV_PM_OPS(stmmac_pm_ops, stmmac_suspend, stmmac_resume); +static int stmmac_pci_suspend(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + int ret; + + ret = stmmac_suspend(dev); + if (ret) + return ret; + + ret = pci_save_state(pdev); + if (ret) + return ret; + + pci_disable_device(pdev); + pci_wake_from_d3(pdev, true); + return 0; +} + +static int stmmac_pci_resume(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + int ret; + + pci_restore_state(pdev); + pci_set_power_state(pdev, PCI_D0); + + ret = pci_enable_device(pdev); + if (ret) + return ret; + + pci_set_master(pdev); + + return stmmac_resume(dev); +} + +static SIMPLE_DEV_PM_OPS(stmmac_pm_ops, stmmac_pci_suspend, stmmac_pci_resume); /* synthetic ID, no official vendor */ #define PCI_VENDOR_ID_STMMAC 0x700 -- cgit v1.2.3 From e02ee9819a03c5d6439636c8fc152b4cc1b48304 Mon Sep 17 00:00:00 2001 From: Ioana Ciornei Date: Tue, 31 Jul 2018 10:45:53 -0500 Subject: Documentation: dpaa2: Use correct heading adornment Add overline heading adornment to document title in order to comply with kernel doc requirements. Fixes: 60b9131 staging: fsl-mc: Convert documentation to rst format Signed-off-by: Ioana Ciornei Signed-off-by: David S. Miller --- Documentation/networking/dpaa2/overview.rst | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/networking/dpaa2/overview.rst b/Documentation/networking/dpaa2/overview.rst index 79fede4447d6..d638b5a8aadd 100644 --- a/Documentation/networking/dpaa2/overview.rst +++ b/Documentation/networking/dpaa2/overview.rst @@ -1,5 +1,6 @@ .. include:: +========================================================= DPAA2 (Data Path Acceleration Architecture Gen2) Overview ========================================================= -- cgit v1.2.3 From bc5b6c0b62b932626a135f516a41838c510c6eba Mon Sep 17 00:00:00 2001 From: Jeremy Cline Date: Tue, 31 Jul 2018 21:13:16 +0000 Subject: netlink: Fix spectre v1 gadget in netlink_create() 'protocol' is a user-controlled value, so sanitize it after the bounds check to avoid using it for speculative out-of-bounds access to arrays indexed by it. This addresses the following accesses detected with the help of smatch: * net/netlink/af_netlink.c:654 __netlink_create() warn: potential spectre issue 'nlk_cb_mutex_keys' [w] * net/netlink/af_netlink.c:654 __netlink_create() warn: potential spectre issue 'nlk_cb_mutex_key_strings' [w] * net/netlink/af_netlink.c:685 netlink_create() warn: potential spectre issue 'nl_table' [w] (local cap) Cc: Josh Poimboeuf Signed-off-by: Jeremy Cline Reviewed-by: Josh Poimboeuf Signed-off-by: David S. Miller --- net/netlink/af_netlink.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index 7d860a22e5fb..c09d16870f74 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -63,6 +63,7 @@ #include #include #include +#include #include #include @@ -679,6 +680,7 @@ static int netlink_create(struct net *net, struct socket *sock, int protocol, if (protocol < 0 || protocol >= MAX_LINKS) return -EPROTONOSUPPORT; + protocol = array_index_nospec(protocol, MAX_LINKS); netlink_lock_table(); #ifdef CONFIG_MODULES -- cgit v1.2.3 From a94c689e6c9e72e722f28339e12dff191ee5a265 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Tue, 31 Jul 2018 17:12:52 -0700 Subject: net: dsa: Do not suspend/resume closed slave_dev If a DSA slave network device was previously disabled, there is no need to suspend or resume it. Fixes: 2446254915a7 ("net: dsa: allow switch drivers to implement suspend/resume hooks") Signed-off-by: Florian Fainelli Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- net/dsa/slave.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/net/dsa/slave.c b/net/dsa/slave.c index 1e3b6a6d8a40..732369c80644 100644 --- a/net/dsa/slave.c +++ b/net/dsa/slave.c @@ -1248,6 +1248,9 @@ int dsa_slave_suspend(struct net_device *slave_dev) { struct dsa_port *dp = dsa_slave_to_port(slave_dev); + if (!netif_running(slave_dev)) + return 0; + netif_device_detach(slave_dev); rtnl_lock(); @@ -1261,6 +1264,9 @@ int dsa_slave_resume(struct net_device *slave_dev) { struct dsa_port *dp = dsa_slave_to_port(slave_dev); + if (!netif_running(slave_dev)) + return 0; + netif_device_attach(slave_dev); rtnl_lock(); -- cgit v1.2.3 From ebad825cdd4e6b327eaf0dd72439408957049cea Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 1 Aug 2018 09:57:50 -0700 Subject: ia64: mark special ia64 memory areas anonymous Commit bfd40eaff5ab ("mm: fix vma_is_anonymous() false-positives") made newly allocated vma's have a dummy vm_ops field so that they wouldn't be mistaken for anonymous mappings, and if you wanted an anonymous vma you had to explicitly say so by calling "vma_set_anonymous()" on it. However, it missed the two special vmas that ia64 processes have: the register backing store and the NaT page. So they wouldn't actually act like anonymous ranges, and page faults on them caused a SIGBUS rather than the creation of a new anon page in them. That obviously will make any ia64 binary very unhappy indeed, and the boot fails early. Fixes: bfd40eaff5ab ("mm: fix vma_is_anonymous() false-positives") Reported-by: Tony Luck Cc: Kirill Shutemov Cc: Andrew Morton Cc: Dmitry Vyukov Cc: Oleg Nesterov Cc: Andrea Arcangeli Cc: John Stultz Signed-off-by: Linus Torvalds --- arch/ia64/mm/init.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c index e6c6dfd98de2..3b85c3ecac38 100644 --- a/arch/ia64/mm/init.c +++ b/arch/ia64/mm/init.c @@ -116,6 +116,7 @@ ia64_init_addr_space (void) */ vma = vm_area_alloc(current->mm); if (vma) { + vma_set_anonymous(vma); vma->vm_start = current->thread.rbs_bot & PAGE_MASK; vma->vm_end = vma->vm_start + PAGE_SIZE; vma->vm_flags = VM_DATA_DEFAULT_FLAGS|VM_GROWSUP|VM_ACCOUNT; @@ -133,6 +134,7 @@ ia64_init_addr_space (void) if (!(current->personality & MMAP_PAGE_ZERO)) { vma = vm_area_alloc(current->mm); if (vma) { + vma_set_anonymous(vma); vma->vm_end = PAGE_SIZE; vma->vm_page_prot = __pgprot(pgprot_val(PAGE_READONLY) | _PAGE_MA_NAT); vma->vm_flags = VM_READ | VM_MAYREAD | VM_IO | -- cgit v1.2.3 From 44960f2a7b63e224b1091b3e1d6f60e0cdf4be0c Mon Sep 17 00:00:00 2001 From: John Stultz Date: Tue, 31 Jul 2018 10:17:04 -0700 Subject: staging: ashmem: Fix SIGBUS crash when traversing mmaped ashmem pages Amit Pundir and Youling in parallel reported crashes with recent mainline kernels running Android: F DEBUG : *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** F DEBUG : Build fingerprint: 'Android/db410c32_only/db410c32_only:Q/OC-MR1/102:userdebug/test-key F DEBUG : Revision: '0' F DEBUG : ABI: 'arm' F DEBUG : pid: 2261, tid: 2261, name: zygote >>> zygote <<< F DEBUG : signal 7 (SIGBUS), code 2 (BUS_ADRERR), fault addr 0xec00008 ... ... F DEBUG : backtrace: F DEBUG : #00 pc 00001c04 /system/lib/libc.so (memset+48) F DEBUG : #01 pc 0010c513 /system/lib/libart.so (create_mspace_with_base+82) F DEBUG : #02 pc 0015c601 /system/lib/libart.so (art::gc::space::DlMallocSpace::CreateMspace(void*, unsigned int, unsigned int)+40) F DEBUG : #03 pc 0015c3ed /system/lib/libart.so (art::gc::space::DlMallocSpace::CreateFromMemMap(art::MemMap*, std::__1::basic_string, std::__1::allocator> const&, unsigned int, unsigned int, unsigned int, unsigned int, bool)+36) ... This was bisected back to commit bfd40eaff5ab ("mm: fix vma_is_anonymous() false-positives"). create_mspace_with_base() in the trace above, utilizes ashmem, and with ashmem, for shared mappings we use shmem_zero_setup(), which sets the vma->vm_ops to &shmem_vm_ops. But for private ashmem mappings nothing sets the vma->vm_ops. Looking at the problematic patch, it seems to add a requirement that one call vma_set_anonymous() on a vma, otherwise the dummy_vm_ops will be used. Using the dummy_vm_ops seem to triggger SIGBUS when traversing unmapped pages. Thus, this patch adds a call to vma_set_anonymous() for ashmem private mappings and seems to avoid the reported problem. Fixes: bfd40eaff5ab ("mm: fix vma_is_anonymous() false-positives") Cc: Kirill Shutemov Cc: Andrew Morton Cc: Dmitry Vyukov Cc: Oleg Nesterov Cc: Andrea Arcangeli Cc: Greg Kroah-Hartman Cc: Hugh Dickins Cc: Joel Fernandes Cc: Colin Cross Cc: Matthew Wilcox Reported-by: Amit Pundir Reported-by: Youling 257 Signed-off-by: John Stultz Signed-off-by: Linus Torvalds --- drivers/staging/android/ashmem.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/staging/android/ashmem.c b/drivers/staging/android/ashmem.c index a1a0025b59e0..d5d33e12e952 100644 --- a/drivers/staging/android/ashmem.c +++ b/drivers/staging/android/ashmem.c @@ -402,6 +402,8 @@ static int ashmem_mmap(struct file *file, struct vm_area_struct *vma) fput(asma->file); goto out; } + } else { + vma_set_anonymous(vma); } if (vma->vm_file) -- cgit v1.2.3 From cdbb65c4c7ead680ebe54f4f0d486e2847a500ea Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 1 Aug 2018 10:38:43 -0700 Subject: squashfs metadata 2: electric boogaloo Anatoly continues to find issues with fuzzed squashfs images. This time, corrupt, missing, or undersized data for the page filling wasn't checked for, because the squashfs_{copy,read}_cache() functions did the squashfs_copy_data() call without checking the resulting data size. Which could result in the page cache pages being incompletely filled in, and no error indication to the user space reading garbage data. So make a helper function for the "fill in pages" case, because the exact same incomplete sequence existed in two places. [ I should have made a squashfs branch for these things, but I didn't intend to start doing them in the first place. My historical connection through cramfs is why I got into looking at these issues at all, and every time I (continue to) think it's a one-off. Because _this_ time is always the last time. Right? - Linus ] Reported-by: Anatoly Trosinenko Tested-by: Willy Tarreau Cc: Al Viro Cc: Phillip Lougher Signed-off-by: Linus Torvalds --- fs/squashfs/file.c | 25 ++++++++++++++++++------- fs/squashfs/file_direct.c | 8 +------- fs/squashfs/squashfs.h | 1 + 3 files changed, 20 insertions(+), 14 deletions(-) diff --git a/fs/squashfs/file.c b/fs/squashfs/file.c index fcff2e0487fe..cce3060650ae 100644 --- a/fs/squashfs/file.c +++ b/fs/squashfs/file.c @@ -374,13 +374,29 @@ static int read_blocklist(struct inode *inode, int index, u64 *block) return squashfs_block_size(size); } +void squashfs_fill_page(struct page *page, struct squashfs_cache_entry *buffer, int offset, int avail) +{ + int copied; + void *pageaddr; + + pageaddr = kmap_atomic(page); + copied = squashfs_copy_data(pageaddr, buffer, offset, avail); + memset(pageaddr + copied, 0, PAGE_SIZE - copied); + kunmap_atomic(pageaddr); + + flush_dcache_page(page); + if (copied == avail) + SetPageUptodate(page); + else + SetPageError(page); +} + /* Copy data into page cache */ void squashfs_copy_cache(struct page *page, struct squashfs_cache_entry *buffer, int bytes, int offset) { struct inode *inode = page->mapping->host; struct squashfs_sb_info *msblk = inode->i_sb->s_fs_info; - void *pageaddr; int i, mask = (1 << (msblk->block_log - PAGE_SHIFT)) - 1; int start_index = page->index & ~mask, end_index = start_index | mask; @@ -406,12 +422,7 @@ void squashfs_copy_cache(struct page *page, struct squashfs_cache_entry *buffer, if (PageUptodate(push_page)) goto skip_page; - pageaddr = kmap_atomic(push_page); - squashfs_copy_data(pageaddr, buffer, offset, avail); - memset(pageaddr + avail, 0, PAGE_SIZE - avail); - kunmap_atomic(pageaddr); - flush_dcache_page(push_page); - SetPageUptodate(push_page); + squashfs_fill_page(push_page, buffer, offset, avail); skip_page: unlock_page(push_page); if (i != page->index) diff --git a/fs/squashfs/file_direct.c b/fs/squashfs/file_direct.c index cb485d8e0e91..096990254a2e 100644 --- a/fs/squashfs/file_direct.c +++ b/fs/squashfs/file_direct.c @@ -144,7 +144,6 @@ static int squashfs_read_cache(struct page *target_page, u64 block, int bsize, struct squashfs_cache_entry *buffer = squashfs_get_datablock(i->i_sb, block, bsize); int bytes = buffer->length, res = buffer->error, n, offset = 0; - void *pageaddr; if (res) { ERROR("Unable to read page, block %llx, size %x\n", block, @@ -159,12 +158,7 @@ static int squashfs_read_cache(struct page *target_page, u64 block, int bsize, if (page[n] == NULL) continue; - pageaddr = kmap_atomic(page[n]); - squashfs_copy_data(pageaddr, buffer, offset, avail); - memset(pageaddr + avail, 0, PAGE_SIZE - avail); - kunmap_atomic(pageaddr); - flush_dcache_page(page[n]); - SetPageUptodate(page[n]); + squashfs_fill_page(page[n], buffer, offset, avail); unlock_page(page[n]); if (page[n] != target_page) put_page(page[n]); diff --git a/fs/squashfs/squashfs.h b/fs/squashfs/squashfs.h index 887d6d270080..d8d43724cf2a 100644 --- a/fs/squashfs/squashfs.h +++ b/fs/squashfs/squashfs.h @@ -67,6 +67,7 @@ extern __le64 *squashfs_read_fragment_index_table(struct super_block *, u64, u64, unsigned int); /* file.c */ +void squashfs_fill_page(struct page *, struct squashfs_cache_entry *, int, int); void squashfs_copy_cache(struct page *, struct squashfs_cache_entry *, int, int); -- cgit v1.2.3 From c01f6c9b3207e52fc9973a066a856ddf7a0538d8 Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Wed, 1 Aug 2018 13:27:23 +0100 Subject: rxrpc: Fix user call ID check in rxrpc_service_prealloc_one There just check the user call ID isn't already in use, hence should compare user_call_ID with xcall->user_call_ID, which is current node's user_call_ID. Fixes: 540b1c48c37a ("rxrpc: Fix deadlock between call creation and sendmsg/recvmsg") Suggested-by: David Howells Signed-off-by: YueHaibing Signed-off-by: David Howells Signed-off-by: David S. Miller --- net/rxrpc/call_accept.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/rxrpc/call_accept.c b/net/rxrpc/call_accept.c index a9a9be5519b9..9d1e298b784c 100644 --- a/net/rxrpc/call_accept.c +++ b/net/rxrpc/call_accept.c @@ -116,9 +116,9 @@ static int rxrpc_service_prealloc_one(struct rxrpc_sock *rx, while (*pp) { parent = *pp; xcall = rb_entry(parent, struct rxrpc_call, sock_node); - if (user_call_ID < call->user_call_ID) + if (user_call_ID < xcall->user_call_ID) pp = &(*pp)->rb_left; - else if (user_call_ID > call->user_call_ID) + else if (user_call_ID > xcall->user_call_ID) pp = &(*pp)->rb_right; else goto id_in_use; -- cgit v1.2.3 From 53406ed1bcfdabe4b5bc35e6d17946c6f9f563e2 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Wed, 1 Aug 2018 11:31:52 -0700 Subject: mm: delete historical BUG from zap_pmd_range() Delete the old VM_BUG_ON_VMA() from zap_pmd_range(), which asserted that mmap_sem must be held when splitting an "anonymous" vma there. Whether that's still strictly true nowadays is not entirely clear, but the danger of sometimes crashing on the BUG is now fairly clear. Even with the new stricter rules for anonymous vma marking, the condition it checks for can possible trigger. Commit 44960f2a7b63 ("staging: ashmem: Fix SIGBUS crash when traversing mmaped ashmem pages") is good, and originally I thought it was safe from that VM_BUG_ON_VMA(), because the /dev/ashmem fd exposed to the user is disconnected from the vm_file in the vma, and madvise(,,MADV_REMOVE) insists on VM_SHARED. But after I read John's earlier mail, drawing attention to the vfs_fallocate() in there: I may be wrong, and I don't know if Android has THP in the config anyway, but it looks to me like an unmap_mapping_range() from ashmem's vfs_fallocate() could hit precisely the VM_BUG_ON_VMA(), once it's vma_is_anonymous(). Signed-off-by: Hugh Dickins Cc: John Stultz Cc: Kirill Shutemov Cc: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memory.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/mm/memory.c b/mm/memory.c index 7206a634270b..dab1511294ad 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -1417,11 +1417,9 @@ static inline unsigned long zap_pmd_range(struct mmu_gather *tlb, do { next = pmd_addr_end(addr, end); if (is_swap_pmd(*pmd) || pmd_trans_huge(*pmd) || pmd_devmap(*pmd)) { - if (next - addr != HPAGE_PMD_SIZE) { - VM_BUG_ON_VMA(vma_is_anonymous(vma) && - !rwsem_is_locked(&tlb->mm->mmap_sem), vma); + if (next - addr != HPAGE_PMD_SIZE) __split_huge_pmd(vma, pmd, addr, false, NULL); - } else if (zap_huge_pmd(tlb, vma, pmd, addr)) + else if (zap_huge_pmd(tlb, vma, pmd, addr)) goto next; /* fall through */ } -- cgit v1.2.3 From 8b11ec1b5ffb54f71cb5a5e5c8c4d36e5d113085 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 1 Aug 2018 13:43:38 -0700 Subject: mm: do not initialize TLB stack vma's with vma_init() Commit 2c4541e24c55 ("mm: use vma_init() to initialize VMAs on stack and data segments") tried to initialize various left-over ad-hoc vma's "properly", but actually made things worse for the temporary vma's used for TLB flushing. vma_init() doesn't actually initialize all of the vma, just a few fields, so doing something like - struct vm_area_struct vma = { .vm_mm = tlb->mm, }; + struct vm_area_struct vma; + + vma_init(&vma, tlb->mm); was actually very bad: instead of having a nicely initialized vma with every field but "vm_mm" zeroed, you'd have an entirely uninitialized vma with only a couple of fields initialized. And they weren't even fields that the code in question mostly cared about. The flush_tlb_range() function takes a "struct vma" rather than a "struct mm_struct", because a few architectures actually care about what kind of range it is - being able to only do an ITLB flush if it's a range that doesn't have data accesses enabled, for example. And all the normal users already have the vma for doing the range invalidation. But a few people want to call flush_tlb_range() with a range they just made up, so they also end up using a made-up vma. x86 just has a special "flush_tlb_mm_range()" function for this, but other architectures (arm and ia64) do the "use fake vma" thing instead, and thus got caught up in the vma_init() changes. At the same time, the TLB flushing code really doesn't care about most other fields in the vma, so vma_init() is just unnecessary and pointless. This fixes things by having an explicit "this is just an initializer for the TLB flush" initializer macro, which is used by the arm/arm64/ia64 people who mis-use this interface with just a dummy vma. Fixes: 2c4541e24c55 ("mm: use vma_init() to initialize VMAs on stack and data segments") Cc: Dmitry Vyukov Cc: Oleg Nesterov Cc: Andrea Arcangeli Cc: Kirill Shutemov Cc: Andrew Morton Cc: John Stultz Cc: Hugh Dickins Signed-off-by: Linus Torvalds --- arch/arm/mach-rpc/ecard.c | 5 +---- arch/arm64/include/asm/tlb.h | 4 +--- arch/arm64/mm/hugetlbpage.c | 10 ++++------ arch/ia64/include/asm/tlb.h | 7 +++---- include/linux/mm.h | 3 +++ 5 files changed, 12 insertions(+), 17 deletions(-) diff --git a/arch/arm/mach-rpc/ecard.c b/arch/arm/mach-rpc/ecard.c index 8db62cc54a6a..04b2f22c2739 100644 --- a/arch/arm/mach-rpc/ecard.c +++ b/arch/arm/mach-rpc/ecard.c @@ -212,7 +212,7 @@ static DEFINE_MUTEX(ecard_mutex); */ static void ecard_init_pgtables(struct mm_struct *mm) { - struct vm_area_struct vma; + struct vm_area_struct vma = TLB_FLUSH_VMA(mm, VM_EXEC); /* We want to set up the page tables for the following mapping: * Virtual Physical @@ -237,9 +237,6 @@ static void ecard_init_pgtables(struct mm_struct *mm) memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (EASI_SIZE / PGDIR_SIZE)); - vma_init(&vma, mm); - vma.vm_flags = VM_EXEC; - flush_tlb_range(&vma, IO_START, IO_START + IO_SIZE); flush_tlb_range(&vma, EASI_START, EASI_START + EASI_SIZE); } diff --git a/arch/arm64/include/asm/tlb.h b/arch/arm64/include/asm/tlb.h index d87f2d646caa..0ad1cf233470 100644 --- a/arch/arm64/include/asm/tlb.h +++ b/arch/arm64/include/asm/tlb.h @@ -37,9 +37,7 @@ static inline void __tlb_remove_table(void *_table) static inline void tlb_flush(struct mmu_gather *tlb) { - struct vm_area_struct vma; - - vma_init(&vma, tlb->mm); + struct vm_area_struct vma = TLB_FLUSH_VMA(tlb->mm, 0); /* * The ASID allocator will either invalidate the ASID or mark diff --git a/arch/arm64/mm/hugetlbpage.c b/arch/arm64/mm/hugetlbpage.c index 1854e49aa18a..192b3ba07075 100644 --- a/arch/arm64/mm/hugetlbpage.c +++ b/arch/arm64/mm/hugetlbpage.c @@ -108,13 +108,10 @@ static pte_t get_clear_flush(struct mm_struct *mm, unsigned long pgsize, unsigned long ncontig) { - struct vm_area_struct vma; pte_t orig_pte = huge_ptep_get(ptep); bool valid = pte_valid(orig_pte); unsigned long i, saddr = addr; - vma_init(&vma, mm); - for (i = 0; i < ncontig; i++, addr += pgsize, ptep++) { pte_t pte = ptep_get_and_clear(mm, addr, ptep); @@ -127,8 +124,10 @@ static pte_t get_clear_flush(struct mm_struct *mm, orig_pte = pte_mkdirty(orig_pte); } - if (valid) + if (valid) { + struct vm_area_struct vma = TLB_FLUSH_VMA(mm, 0); flush_tlb_range(&vma, saddr, addr); + } return orig_pte; } @@ -147,10 +146,9 @@ static void clear_flush(struct mm_struct *mm, unsigned long pgsize, unsigned long ncontig) { - struct vm_area_struct vma; + struct vm_area_struct vma = TLB_FLUSH_VMA(mm, 0); unsigned long i, saddr = addr; - vma_init(&vma, mm); for (i = 0; i < ncontig; i++, addr += pgsize, ptep++) pte_clear(mm, addr, ptep); diff --git a/arch/ia64/include/asm/tlb.h b/arch/ia64/include/asm/tlb.h index db89e7306081..516355a774bf 100644 --- a/arch/ia64/include/asm/tlb.h +++ b/arch/ia64/include/asm/tlb.h @@ -115,12 +115,11 @@ ia64_tlb_flush_mmu_tlbonly(struct mmu_gather *tlb, unsigned long start, unsigned flush_tlb_all(); } else { /* - * XXX fix me: flush_tlb_range() should take an mm pointer instead of a - * vma pointer. + * flush_tlb_range() takes a vma instead of a mm pointer because + * some architectures want the vm_flags for ITLB/DTLB flush. */ - struct vm_area_struct vma; + struct vm_area_struct vma = TLB_FLUSH_VMA(tlb->mm, 0); - vma_init(&vma, tlb->mm); /* flush the address range from the tlb: */ flush_tlb_range(&vma, start, end); /* now flush the virt. page-table area mapping the address range: */ diff --git a/include/linux/mm.h b/include/linux/mm.h index 7ba6d356d18f..68a5121694ef 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -466,6 +466,9 @@ static inline void vma_set_anonymous(struct vm_area_struct *vma) vma->vm_ops = NULL; } +/* flush_tlb_range() takes a vma, not a mm, and can care about flags */ +#define TLB_FLUSH_VMA(mm,flags) { .vm_mm = (mm), .vm_flags = (flags) } + struct mmu_gather; struct inode; -- cgit v1.2.3 From 6ea76bf51339506e9fb00d6caebf5d6b42a571e3 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Sun, 29 Jul 2018 22:21:22 -0400 Subject: NFSv4: Fix _nfs4_do_setlk() The patch to fix the case where a lock request was interrupted ended up changing default handling of errors such as NFS4ERR_DENIED and caused the client to immediately resend the lock request. Let's do a partial revert of that request so that the default is now to exit, but change the way we handle resends to take into account the fact that the user may have interrupted the request. Reported-by: Kenneth Johansson Fixes: a3cf9bca2ace ("NFSv4: Don't add a new lock on an interrupted wait..") Cc: Benjamin Coddington Cc: Jeff Layton Signed-off-by: Trond Myklebust Reviewed-by: Jeff Layton --- fs/nfs/nfs4proc.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 6dd146885da9..f6c4ccd693f4 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -6466,34 +6466,34 @@ static void nfs4_lock_done(struct rpc_task *task, void *calldata) if (data->arg.new_lock && !data->cancelled) { data->fl.fl_flags &= ~(FL_SLEEP | FL_ACCESS); if (locks_lock_inode_wait(lsp->ls_state->inode, &data->fl) < 0) - break; + goto out_restart; } - if (data->arg.new_lock_owner != 0) { nfs_confirm_seqid(&lsp->ls_seqid, 0); nfs4_stateid_copy(&lsp->ls_stateid, &data->res.stateid); set_bit(NFS_LOCK_INITIALIZED, &lsp->ls_flags); - goto out_done; - } else if (nfs4_update_lock_stateid(lsp, &data->res.stateid)) - goto out_done; - + } else if (!nfs4_update_lock_stateid(lsp, &data->res.stateid)) + goto out_restart; break; case -NFS4ERR_BAD_STATEID: case -NFS4ERR_OLD_STATEID: case -NFS4ERR_STALE_STATEID: case -NFS4ERR_EXPIRED: if (data->arg.new_lock_owner != 0) { - if (nfs4_stateid_match(&data->arg.open_stateid, + if (!nfs4_stateid_match(&data->arg.open_stateid, &lsp->ls_state->open_stateid)) - goto out_done; - } else if (nfs4_stateid_match(&data->arg.lock_stateid, + goto out_restart; + } else if (!nfs4_stateid_match(&data->arg.lock_stateid, &lsp->ls_stateid)) - goto out_done; + goto out_restart; } - if (!data->cancelled) - rpc_restart_call_prepare(task); out_done: dprintk("%s: done, ret = %d!\n", __func__, data->rpc_status); + return; +out_restart: + if (!data->cancelled) + rpc_restart_call_prepare(task); + goto out_done; } static void nfs4_lock_release(void *calldata) @@ -6502,7 +6502,7 @@ static void nfs4_lock_release(void *calldata) dprintk("%s: begin!\n", __func__); nfs_free_seqid(data->arg.open_seqid); - if (data->cancelled) { + if (data->cancelled && data->rpc_status == 0) { struct rpc_task *task; task = nfs4_do_unlck(&data->fl, data->ctx, data->lsp, data->arg.lock_seqid); -- cgit v1.2.3 From e6aed040eafb4ce1881bbc59a225f6b27d250396 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 1 Aug 2018 21:32:30 -0700 Subject: Revert "net/ipv6: fix metrics leak" This reverts commit df18b50448fab1dff093731dfd0e25e77e1afcd1. This change causes other problems and use-after-free situations as found by syzbot. Signed-off-by: David S. Miller --- net/ipv6/ip6_fib.c | 18 ++++-------------- 1 file changed, 4 insertions(+), 14 deletions(-) diff --git a/net/ipv6/ip6_fib.c b/net/ipv6/ip6_fib.c index 211a2d437b56..d212738e9d10 100644 --- a/net/ipv6/ip6_fib.c +++ b/net/ipv6/ip6_fib.c @@ -167,22 +167,11 @@ struct fib6_info *fib6_info_alloc(gfp_t gfp_flags) return f6i; } -static void fib6_metrics_release(struct fib6_info *f6i) -{ - struct dst_metrics *m; - - if (!f6i) - return; - - m = f6i->fib6_metrics; - if (m != &dst_default_metrics && refcount_dec_and_test(&m->refcnt)) - kfree(m); -} - void fib6_info_destroy_rcu(struct rcu_head *head) { struct fib6_info *f6i = container_of(head, struct fib6_info, rcu); struct rt6_exception_bucket *bucket; + struct dst_metrics *m; WARN_ON(f6i->fib6_node); @@ -212,7 +201,9 @@ void fib6_info_destroy_rcu(struct rcu_head *head) if (f6i->fib6_nh.nh_dev) dev_put(f6i->fib6_nh.nh_dev); - fib6_metrics_release(f6i); + m = f6i->fib6_metrics; + if (m != &dst_default_metrics && refcount_dec_and_test(&m->refcnt)) + kfree(m); kfree(f6i); } @@ -896,7 +887,6 @@ static void fib6_drop_pcpu_from(struct fib6_info *f6i, from = rcu_dereference_protected(pcpu_rt->from, lockdep_is_held(&table->tb6_lock)); - fib6_metrics_release(from); rcu_assign_pointer(pcpu_rt->from, NULL); fib6_info_release(from); } -- cgit v1.2.3 From 9a73f6a235c2351adc07471519d4980e2fb33bbc Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Wed, 1 Aug 2018 14:47:09 -0500 Subject: ASoC: wm8961: Mark expected switch fall-through In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1271173 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva Signed-off-by: Mark Brown --- sound/soc/codecs/wm8961.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/codecs/wm8961.c b/sound/soc/codecs/wm8961.c index f70f563d59f3..68b4cadc308f 100644 --- a/sound/soc/codecs/wm8961.c +++ b/sound/soc/codecs/wm8961.c @@ -653,6 +653,7 @@ static int wm8961_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) case SND_SOC_DAIFMT_DSP_B: aif |= WM8961_LRP; + /* fall through */ case SND_SOC_DAIFMT_DSP_A: aif |= 3; switch (fmt & SND_SOC_DAIFMT_INV_MASK) { -- cgit v1.2.3 From 065dcc270af66acb4226b49f635b41a054b663d4 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Wed, 1 Aug 2018 14:49:13 -0500 Subject: ASoC: rt5640: Mark expected switch fall-through In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1056547 ("Missing break in switch") Addresses-Coverity-ID: 1056548 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva Signed-off-by: Mark Brown --- sound/soc/codecs/rt5640.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/codecs/rt5640.c b/sound/soc/codecs/rt5640.c index 8bf8d360c25f..27770143ae8f 100644 --- a/sound/soc/codecs/rt5640.c +++ b/sound/soc/codecs/rt5640.c @@ -1665,6 +1665,7 @@ static int get_sdp_info(struct snd_soc_component *component, int dai_id) break; case RT5640_IF_113: ret |= RT5640_U_IF1; + /* fall through */ case RT5640_IF_312: case RT5640_IF_213: ret |= RT5640_U_IF2; @@ -1680,6 +1681,7 @@ static int get_sdp_info(struct snd_soc_component *component, int dai_id) break; case RT5640_IF_223: ret |= RT5640_U_IF1; + /* fall through */ case RT5640_IF_123: case RT5640_IF_321: ret |= RT5640_U_IF2; -- cgit v1.2.3 From 43a26bd026dab09a8b28c40e94ba534a52375b20 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Wed, 1 Aug 2018 14:50:20 -0500 Subject: ASoC: rt5677: Mark expected switch fall-through In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1271174 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva Signed-off-by: Mark Brown --- sound/soc/codecs/rt5677.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/codecs/rt5677.c b/sound/soc/codecs/rt5677.c index 8a0181a2db08..922becfee59b 100644 --- a/sound/soc/codecs/rt5677.c +++ b/sound/soc/codecs/rt5677.c @@ -4417,6 +4417,7 @@ static int rt5677_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask, break; case 25: slot_width_25 = 0x8080; + /* fall through */ case 24: val |= (2 << 8); break; -- cgit v1.2.3 From 85e7e77079f3201799467803f6c8533a9921e32d Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Wed, 1 Aug 2018 14:51:18 -0500 Subject: ASoC: wm8955: Mark expected switch fall-through In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 115047 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva Signed-off-by: Mark Brown --- sound/soc/codecs/wm8955.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/codecs/wm8955.c b/sound/soc/codecs/wm8955.c index ba44e3d6c1e0..cd204f79647d 100644 --- a/sound/soc/codecs/wm8955.c +++ b/sound/soc/codecs/wm8955.c @@ -686,6 +686,7 @@ static int wm8955_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { case SND_SOC_DAIFMT_DSP_B: aif |= WM8955_LRP; + /* fall through */ case SND_SOC_DAIFMT_DSP_A: aif |= 0x3; break; -- cgit v1.2.3 From 3eb7dbc6d844d2033271434d02ff90ac9b19e393 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Wed, 1 Aug 2018 14:51:59 -0500 Subject: ASoC: wm8960: Mark expected switch fall-through In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 115041 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva Signed-off-by: Mark Brown --- sound/soc/codecs/wm8960.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c index c30f5aa392c6..8dc1f3d6a988 100644 --- a/sound/soc/codecs/wm8960.c +++ b/sound/soc/codecs/wm8960.c @@ -839,6 +839,7 @@ static int wm8960_hw_params(struct snd_pcm_substream *substream, iface |= 0x000c; break; } + /* fall through */ default: dev_err(component->dev, "unsupported width %d\n", params_width(params)); -- cgit v1.2.3 From da41787b9f319a7a23fcc8cf65c6ad646803962e Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Wed, 1 Aug 2018 14:52:41 -0500 Subject: ASoC: wm8904: Mark expected switch fall-through In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 115042 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva Signed-off-by: Mark Brown --- sound/soc/codecs/wm8904.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/codecs/wm8904.c b/sound/soc/codecs/wm8904.c index 9037a35b931d..1965635ec07c 100644 --- a/sound/soc/codecs/wm8904.c +++ b/sound/soc/codecs/wm8904.c @@ -1455,6 +1455,7 @@ static int wm8904_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { case SND_SOC_DAIFMT_DSP_B: aif1 |= 0x3 | WM8904_AIF_LRCLK_INV; + /* fall through */ case SND_SOC_DAIFMT_DSP_A: aif1 |= 0x3; break; -- cgit v1.2.3 From 42ef3c94ff6e8315377c04504f1bce50d1f21738 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Wed, 1 Aug 2018 14:53:19 -0500 Subject: ASoC: wm8996: Mark expected switch fall-through In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 146354 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva Signed-off-by: Mark Brown --- sound/soc/codecs/wm8996.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/codecs/wm8996.c b/sound/soc/codecs/wm8996.c index d9d206046f8c..78a408236cfb 100644 --- a/sound/soc/codecs/wm8996.c +++ b/sound/soc/codecs/wm8996.c @@ -1858,6 +1858,7 @@ static int wm8996_set_sysclk(struct snd_soc_dai *dai, case 24576000: ratediv = WM8996_SYSCLK_DIV; wm8996->sysclk /= 2; + /* fall through */ case 11289600: case 12288000: snd_soc_component_update_bits(component, WM8996_AIF_RATE, -- cgit v1.2.3 From a9531ab151117e976544e0dc74a9bc8cbd01145f Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Wed, 1 Aug 2018 14:54:03 -0500 Subject: ASoC: wm8962: Mark expected switch fall-through In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 115043 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva Signed-off-by: Mark Brown --- sound/soc/codecs/wm8962.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index a11e9d6bf950..efd8910b1ff7 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -2649,6 +2649,7 @@ static int wm8962_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt) switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { case SND_SOC_DAIFMT_DSP_B: aif0 |= WM8962_LRCLK_INV | 3; + /* fall through */ case SND_SOC_DAIFMT_DSP_A: aif0 |= 3; -- cgit v1.2.3 From af5d1d5d4ba71164711025e077511ad48d5690e9 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Wed, 1 Aug 2018 14:54:45 -0500 Subject: ASoC: wm8995: Mark expected switch fall-through In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 115045 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva Signed-off-by: Mark Brown --- sound/soc/codecs/wm8995.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/codecs/wm8995.c b/sound/soc/codecs/wm8995.c index 60e227832331..68c99fe37097 100644 --- a/sound/soc/codecs/wm8995.c +++ b/sound/soc/codecs/wm8995.c @@ -1465,6 +1465,7 @@ static int wm8995_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt) switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { case SND_SOC_DAIFMT_DSP_B: aif |= WM8995_AIF1_LRCLK_INV; + /* fall through */ case SND_SOC_DAIFMT_DSP_A: aif |= (0x3 << WM8995_AIF1_FMT_SHIFT); break; -- cgit v1.2.3 From 7a2235ef507822679ac89007a6a37b23f30eed56 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Wed, 1 Aug 2018 14:55:26 -0500 Subject: ASoC: wm9081: Mark expected switch fall-through In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1357430 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva Signed-off-by: Mark Brown --- sound/soc/codecs/wm9081.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/codecs/wm9081.c b/sound/soc/codecs/wm9081.c index 5a0ea7b3c149..399255d1f78a 100644 --- a/sound/soc/codecs/wm9081.c +++ b/sound/soc/codecs/wm9081.c @@ -933,6 +933,7 @@ static int wm9081_set_dai_fmt(struct snd_soc_dai *dai, switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { case SND_SOC_DAIFMT_DSP_B: aif2 |= WM9081_AIF_LRCLK_INV; + /* fall through */ case SND_SOC_DAIFMT_DSP_A: aif2 |= 0x3; break; -- cgit v1.2.3 From 2cea1542859bc812f1ec51ea71c06e927e5b922e Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Wed, 1 Aug 2018 14:56:16 -0500 Subject: ASoC: wm8994: Mark expected switch fall-through In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 115050 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva Signed-off-by: Mark Brown --- sound/soc/codecs/wm8994.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 7fdfdf3f6e67..62f8c5b9ba92 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -2432,6 +2432,7 @@ static int wm8994_set_dai_sysclk(struct snd_soc_dai *dai, snd_soc_component_update_bits(component, WM8994_POWER_MANAGEMENT_2, WM8994_OPCLK_ENA, 0); } + /* fall through */ default: return -EINVAL; -- cgit v1.2.3 From 73edbe42582207ff8f47168f05124376394aa643 Mon Sep 17 00:00:00 2001 From: Rohit kumar Date: Thu, 2 Aug 2018 12:32:59 +0530 Subject: ASoC: qcom: Fix unmet dependency warning for SND_SOC_SDM845 Add DEPENDS_ON QCOM_APR for SND_SOC_SDM845 to fix the warning: unmet direct dependencies detected for SND_SOC_QDSP6. Reported-by: Stephen Rothwell Signed-off-by: Rohit kumar Signed-off-by: Mark Brown --- sound/soc/qcom/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig index 350730839c6f..5f03312ef007 100644 --- a/sound/soc/qcom/Kconfig +++ b/sound/soc/qcom/Kconfig @@ -93,6 +93,7 @@ config SND_SOC_MSM8996 config SND_SOC_SDM845 tristate "SoC Machine driver for SDM845 boards" + depends on QCOM_APR select SND_SOC_QDSP6 help To add support for audio on Qualcomm Technologies Inc. -- cgit v1.2.3 From fdec79c18b08c68cfa079f2d3ee23c5a120a2eda Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 2 Aug 2018 01:47:30 +0000 Subject: ASoC: fsi: convert to SPDX identifiers Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- include/sound/sh_fsi.h | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) diff --git a/include/sound/sh_fsi.h b/include/sound/sh_fsi.h index 7a9710b4b799..89eafe23ef88 100644 --- a/include/sound/sh_fsi.h +++ b/include/sound/sh_fsi.h @@ -1,16 +1,13 @@ -#ifndef __SOUND_FSI_H -#define __SOUND_FSI_H - -/* +/* SPDX-License-Identifier: GPL-2.0 + * * Fifo-attached Serial Interface (FSI) support for SH7724 * * Copyright (C) 2009 Renesas Solutions Corp. * Kuninori Morimoto - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ +#ifndef __SOUND_FSI_H +#define __SOUND_FSI_H + #include #include -- cgit v1.2.3 From 1b3a62643660020cdc68e6139a010c06e8fc96c7 Mon Sep 17 00:00:00 2001 From: "Kirill A. Shutemov" Date: Wed, 1 Aug 2018 16:32:25 +0300 Subject: x86/boot/compressed/64: Validate trampoline placement against E820 There were two report of boot failure cased by trampoline placed into a reserved memory region. It can happen on machines that don't report EBDA correctly. Fix the problem by re-validating the found address against the E820 table. If the address is in a reserved area, find the next usable region below the initial address. Fixes: 3548e131ec6a ("x86/boot/compressed/64: Find a place for 32-bit trampoline") Reported-by: Dmitry Malkin Reported-by: youling 257 Signed-off-by: Kirill A. Shutemov Signed-off-by: Thomas Gleixner Cc: "H. Peter Anvin" Link: https://lkml.kernel.org/r/20180801133225.38121-1-kirill.shutemov@linux.intel.com --- arch/x86/boot/compressed/pgtable_64.c | 73 ++++++++++++++++++++++++++--------- 1 file changed, 55 insertions(+), 18 deletions(-) diff --git a/arch/x86/boot/compressed/pgtable_64.c b/arch/x86/boot/compressed/pgtable_64.c index 8c5107545251..9e2157371491 100644 --- a/arch/x86/boot/compressed/pgtable_64.c +++ b/arch/x86/boot/compressed/pgtable_64.c @@ -1,3 +1,4 @@ +#include #include #include "pgtable.h" #include "../string.h" @@ -34,10 +35,62 @@ unsigned long *trampoline_32bit __section(.data); extern struct boot_params *boot_params; int cmdline_find_option_bool(const char *option); +static unsigned long find_trampoline_placement(void) +{ + unsigned long bios_start, ebda_start; + unsigned long trampoline_start; + struct boot_e820_entry *entry; + int i; + + /* + * Find a suitable spot for the trampoline. + * This code is based on reserve_bios_regions(). + */ + + ebda_start = *(unsigned short *)0x40e << 4; + bios_start = *(unsigned short *)0x413 << 10; + + if (bios_start < BIOS_START_MIN || bios_start > BIOS_START_MAX) + bios_start = BIOS_START_MAX; + + if (ebda_start > BIOS_START_MIN && ebda_start < bios_start) + bios_start = ebda_start; + + bios_start = round_down(bios_start, PAGE_SIZE); + + /* Find the first usable memory region under bios_start. */ + for (i = boot_params->e820_entries - 1; i >= 0; i--) { + entry = &boot_params->e820_table[i]; + + /* Skip all entries above bios_start. */ + if (bios_start <= entry->addr) + continue; + + /* Skip non-RAM entries. */ + if (entry->type != E820_TYPE_RAM) + continue; + + /* Adjust bios_start to the end of the entry if needed. */ + if (bios_start > entry->addr + entry->size) + bios_start = entry->addr + entry->size; + + /* Keep bios_start page-aligned. */ + bios_start = round_down(bios_start, PAGE_SIZE); + + /* Skip the entry if it's too small. */ + if (bios_start - TRAMPOLINE_32BIT_SIZE < entry->addr) + continue; + + break; + } + + /* Place the trampoline just below the end of low memory */ + return bios_start - TRAMPOLINE_32BIT_SIZE; +} + struct paging_config paging_prepare(void *rmode) { struct paging_config paging_config = {}; - unsigned long bios_start, ebda_start; /* Initialize boot_params. Required for cmdline_find_option_bool(). */ boot_params = rmode; @@ -61,23 +114,7 @@ struct paging_config paging_prepare(void *rmode) paging_config.l5_required = 1; } - /* - * Find a suitable spot for the trampoline. - * This code is based on reserve_bios_regions(). - */ - - ebda_start = *(unsigned short *)0x40e << 4; - bios_start = *(unsigned short *)0x413 << 10; - - if (bios_start < BIOS_START_MIN || bios_start > BIOS_START_MAX) - bios_start = BIOS_START_MAX; - - if (ebda_start > BIOS_START_MIN && ebda_start < bios_start) - bios_start = ebda_start; - - /* Place the trampoline just below the end of low memory, aligned to 4k */ - paging_config.trampoline_start = bios_start - TRAMPOLINE_32BIT_SIZE; - paging_config.trampoline_start = round_down(paging_config.trampoline_start, PAGE_SIZE); + paging_config.trampoline_start = find_trampoline_placement(); trampoline_32bit = (unsigned long *)paging_config.trampoline_start; -- cgit v1.2.3 From 1eb576881ff884dd6d10272b96cc336d156492c2 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Thu, 2 Aug 2018 16:03:36 +0100 Subject: ASoC: apq8096: remove auto rebinding Remove auto rebinding support, as component framework can deadlock in few usecases if we are trying to add new/remove component within a bind/unbind callbacks. Card rebinding is ASoC core feature so all the previous component framework stuff in q6dsp remains removed. Signed-off-by: Srinivas Kandagatla Signed-off-by: Mark Brown --- sound/soc/qcom/apq8096.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/sound/soc/qcom/apq8096.c b/sound/soc/qcom/apq8096.c index 1e4a90d59228..6ee7e66cbaaa 100644 --- a/sound/soc/qcom/apq8096.c +++ b/sound/soc/qcom/apq8096.c @@ -48,7 +48,6 @@ static int apq8096_platform_probe(struct platform_device *pdev) return -ENOMEM; card->dev = dev; - card->auto_bind = true; dev_set_drvdata(dev, card); ret = qcom_snd_parse_of(card); if (ret) { @@ -74,7 +73,6 @@ static int apq8096_platform_remove(struct platform_device *pdev) { struct snd_soc_card *card = dev_get_drvdata(&pdev->dev); - card->auto_bind = false; snd_soc_unregister_card(card); kfree(card->dai_link); kfree(card); -- cgit v1.2.3 From 62121debfb31a8700e387bd2987779b3a98bc520 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Thu, 2 Aug 2018 16:03:37 +0100 Subject: ASoC: smd845: remove auto rebinding Remove auto rebinding support, as component framework can deadlock in few usecases if we are trying to add new/remove component within a bind/unbind callbacks. Card rebinding is ASoC core feature so all the previous component framework stuff in q6dsp remains removed. Signed-off-by: Srinivas Kandagatla Signed-off-by: Mark Brown --- sound/soc/qcom/sdm845.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/sound/soc/qcom/sdm845.c b/sound/soc/qcom/sdm845.c index bf4ec4646906..be0cb1122036 100644 --- a/sound/soc/qcom/sdm845.c +++ b/sound/soc/qcom/sdm845.c @@ -226,7 +226,6 @@ static int sdm845_snd_platform_probe(struct platform_device *pdev) return -ENOMEM; card->dev = dev; - card->auto_bind = true; dev_set_drvdata(dev, card); ret = qcom_snd_parse_of(card); if (ret) { @@ -258,7 +257,6 @@ static int sdm845_snd_platform_remove(struct platform_device *pdev) struct snd_soc_card *card = dev_get_drvdata(&pdev->dev); struct sdm845_snd_data *data = snd_soc_card_get_drvdata(card); - card->auto_bind = false; snd_soc_unregister_card(card); kfree(card->dai_link); kfree(data); -- cgit v1.2.3 From 611cbc8799b672f41b6ba7afed758ad9efb959a7 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Thu, 2 Aug 2018 16:03:38 +0100 Subject: ASoC: core: remove support for card rebind using component framework DRM based audio components get registered inside the component framework bind callback. However component framework has a big mutex lock taken for every call to component_add, component_del and bind, unbind callbacks. This can lead to deadlock situation if we are trying to add new/remove component within a bind/unbind callbacks. Which is what was happening with bcm2837 rpi 3. Revert this change till we sort out the mutex issue. Reported-by: Guillaume Tucker Reported-by: Stefan Wahren Signed-off-by: Srinivas Kandagatla Signed-off-by: Mark Brown --- include/sound/soc.h | 7 ------ sound/soc/soc-core.c | 62 ---------------------------------------------------- 2 files changed, 69 deletions(-) diff --git a/include/sound/soc.h b/include/sound/soc.h index ace474e8649e..41cec42fb456 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -17,7 +17,6 @@ #include #include #include -#include #include #include #include @@ -1091,12 +1090,6 @@ struct snd_soc_card { struct work_struct deferred_resume_work; - /* component framework related */ - bool components_added; - /* set in machine driver to enable/disable auto re-binding */ - bool auto_bind; - struct component_match *match; - /* lists of probed devices belonging to this card */ struct list_head component_dev_list; diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 81b27923303d..82eb3868be67 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -279,28 +279,11 @@ static inline void snd_soc_debugfs_exit(void) #endif -static int snd_soc_card_comp_compare(struct device *dev, void *data) -{ - struct snd_soc_component *component; - - lockdep_assert_held(&client_mutex); - list_for_each_entry(component, &component_list, list) { - if (dev == component->dev) { - if (!strcmp(component->name, data)) - return 1; - break; - } - } - - return 0; -} - static int snd_soc_rtdcom_add(struct snd_soc_pcm_runtime *rtd, struct snd_soc_component *component) { struct snd_soc_rtdcom_list *rtdcom; struct snd_soc_rtdcom_list *new_rtdcom; - char *cname; for_each_rtdcom(rtd, rtdcom) { /* already connected */ @@ -317,13 +300,6 @@ static int snd_soc_rtdcom_add(struct snd_soc_pcm_runtime *rtd, list_add_tail(&new_rtdcom->list, &rtd->component_list); - if (rtd->card->auto_bind && !rtd->card->components_added) { - cname = devm_kasprintf(rtd->card->dev, GFP_KERNEL, - "%s", component->name); - component_match_add(rtd->card->dev, &rtd->card->match, - snd_soc_card_comp_compare, cname); - } - return 0; } @@ -859,25 +835,6 @@ static bool soc_is_dai_link_bound(struct snd_soc_card *card, return false; } -static int snd_soc_card_comp_bind(struct device *dev) -{ - struct snd_soc_card *card = dev_get_drvdata(dev); - - if (card->instantiated) - return 0; - - return snd_soc_register_card(card); -} - -static void snd_soc_card_comp_unbind(struct device *dev) -{ -} - -static const struct component_master_ops snd_soc_card_comp_ops = { - .bind = snd_soc_card_comp_bind, - .unbind = snd_soc_card_comp_unbind, -}; - static int soc_bind_dai_link(struct snd_soc_card *card, struct snd_soc_dai_link *dai_link) { @@ -2169,12 +2126,6 @@ static int snd_soc_instantiate_card(struct snd_soc_card *card) card->instantiated = 1; snd_soc_dapm_sync(&card->dapm); - if (card->auto_bind && !card->components_added) { - component_master_add_with_match(card->dev, - &snd_soc_card_comp_ops, - card->match); - card->components_added = true; - } mutex_unlock(&card->mutex); mutex_unlock(&client_mutex); @@ -2820,9 +2771,6 @@ int snd_soc_unregister_card(struct snd_soc_card *card) dev_dbg(card->dev, "ASoC: Unregistered card '%s'\n", card->name); } - if (!card->auto_bind && card->components_added) - component_master_del(card->dev, &snd_soc_card_comp_ops); - return 0; } EXPORT_SYMBOL_GPL(snd_soc_unregister_card); @@ -3235,17 +3183,8 @@ int snd_soc_add_component(struct device *dev, snd_soc_component_add(component); - ret = component_add(dev, NULL); - if (ret < 0) { - dev_err(dev, "ASoC: Failed to add Component: %d\n", ret); - goto err_comp; - } - return 0; -err_comp: - soc_remove_component(component); - snd_soc_unregister_dais(component); err_cleanup: snd_soc_component_cleanup(component); err_free: @@ -3293,7 +3232,6 @@ static int __snd_soc_unregister_component(struct device *dev) mutex_unlock(&client_mutex); if (found) { - component_del(dev, NULL); snd_soc_component_cleanup(component); } -- cgit v1.2.3 From 71755ee5350b63fb1f283de8561cdb61b47f4d1d Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 2 Aug 2018 08:43:35 -0700 Subject: squashfs: more metadata hardening MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The squashfs fragment reading code doesn't actually verify that the fragment is inside the fragment table. The end result _is_ verified to be inside the image when actually reading the fragment data, but before that is done, we may end up taking a page fault because the fragment table itself might not even exist. Another report from Anatoly and his endless squashfs image fuzzing. Reported-by: Анатолий Тросиненко Acked-by:: Phillip Lougher , Cc: Willy Tarreau Signed-off-by: Linus Torvalds --- fs/squashfs/fragment.c | 13 +++++++++---- fs/squashfs/squashfs_fs_sb.h | 1 + fs/squashfs/super.c | 5 +++-- 3 files changed, 13 insertions(+), 6 deletions(-) diff --git a/fs/squashfs/fragment.c b/fs/squashfs/fragment.c index 86ad9a4b8c36..0681feab4a84 100644 --- a/fs/squashfs/fragment.c +++ b/fs/squashfs/fragment.c @@ -49,11 +49,16 @@ int squashfs_frag_lookup(struct super_block *sb, unsigned int fragment, u64 *fragment_block) { struct squashfs_sb_info *msblk = sb->s_fs_info; - int block = SQUASHFS_FRAGMENT_INDEX(fragment); - int offset = SQUASHFS_FRAGMENT_INDEX_OFFSET(fragment); - u64 start_block = le64_to_cpu(msblk->fragment_index[block]); + int block, offset, size; struct squashfs_fragment_entry fragment_entry; - int size; + u64 start_block; + + if (fragment >= msblk->fragments) + return -EIO; + block = SQUASHFS_FRAGMENT_INDEX(fragment); + offset = SQUASHFS_FRAGMENT_INDEX_OFFSET(fragment); + + start_block = le64_to_cpu(msblk->fragment_index[block]); size = squashfs_read_metadata(sb, &fragment_entry, &start_block, &offset, sizeof(fragment_entry)); diff --git a/fs/squashfs/squashfs_fs_sb.h b/fs/squashfs/squashfs_fs_sb.h index 1da565cb50c3..ef69c31947bf 100644 --- a/fs/squashfs/squashfs_fs_sb.h +++ b/fs/squashfs/squashfs_fs_sb.h @@ -75,6 +75,7 @@ struct squashfs_sb_info { unsigned short block_log; long long bytes_used; unsigned int inodes; + unsigned int fragments; int xattr_ids; }; #endif diff --git a/fs/squashfs/super.c b/fs/squashfs/super.c index 8a73b97217c8..40e657386fa5 100644 --- a/fs/squashfs/super.c +++ b/fs/squashfs/super.c @@ -175,6 +175,7 @@ static int squashfs_fill_super(struct super_block *sb, void *data, int silent) msblk->inode_table = le64_to_cpu(sblk->inode_table_start); msblk->directory_table = le64_to_cpu(sblk->directory_table_start); msblk->inodes = le32_to_cpu(sblk->inodes); + msblk->fragments = le32_to_cpu(sblk->fragments); flags = le16_to_cpu(sblk->flags); TRACE("Found valid superblock on %pg\n", sb->s_bdev); @@ -185,7 +186,7 @@ static int squashfs_fill_super(struct super_block *sb, void *data, int silent) TRACE("Filesystem size %lld bytes\n", msblk->bytes_used); TRACE("Block size %d\n", msblk->block_size); TRACE("Number of inodes %d\n", msblk->inodes); - TRACE("Number of fragments %d\n", le32_to_cpu(sblk->fragments)); + TRACE("Number of fragments %d\n", msblk->fragments); TRACE("Number of ids %d\n", le16_to_cpu(sblk->no_ids)); TRACE("sblk->inode_table_start %llx\n", msblk->inode_table); TRACE("sblk->directory_table_start %llx\n", msblk->directory_table); @@ -272,7 +273,7 @@ allocate_id_index_table: sb->s_export_op = &squashfs_export_ops; handle_fragments: - fragments = le32_to_cpu(sblk->fragments); + fragments = msblk->fragments; if (fragments == 0) goto check_directory_table; -- cgit v1.2.3 From a3f94cb99a854fa381fe7fadd97c4f61633717a5 Mon Sep 17 00:00:00 2001 From: Phillip Lougher Date: Thu, 2 Aug 2018 16:45:15 +0100 Subject: Squashfs: Compute expected length from inode size rather than block length MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Previously in squashfs_readpage() when copying data into the page cache, it used the length of the datablock read from the filesystem (after decompression). However, if the filesystem has been corrupted this data block may be short, which will leave pages unfilled. The fix for this is to compute the expected number of bytes to copy from the inode size, and use this to detect if the block is short. Signed-off-by: Phillip Lougher Tested-by: Willy Tarreau Cc: Анатолий Тросиненко Signed-off-by: Linus Torvalds --- fs/squashfs/file.c | 25 ++++++++++--------------- fs/squashfs/file_cache.c | 4 ++-- fs/squashfs/file_direct.c | 16 +++++++++++----- fs/squashfs/squashfs.h | 2 +- 4 files changed, 24 insertions(+), 23 deletions(-) diff --git a/fs/squashfs/file.c b/fs/squashfs/file.c index cce3060650ae..f1c1430ae721 100644 --- a/fs/squashfs/file.c +++ b/fs/squashfs/file.c @@ -431,10 +431,9 @@ skip_page: } /* Read datablock stored packed inside a fragment (tail-end packed block) */ -static int squashfs_readpage_fragment(struct page *page) +static int squashfs_readpage_fragment(struct page *page, int expected) { struct inode *inode = page->mapping->host; - struct squashfs_sb_info *msblk = inode->i_sb->s_fs_info; struct squashfs_cache_entry *buffer = squashfs_get_fragment(inode->i_sb, squashfs_i(inode)->fragment_block, squashfs_i(inode)->fragment_size); @@ -445,23 +444,16 @@ static int squashfs_readpage_fragment(struct page *page) squashfs_i(inode)->fragment_block, squashfs_i(inode)->fragment_size); else - squashfs_copy_cache(page, buffer, i_size_read(inode) & - (msblk->block_size - 1), + squashfs_copy_cache(page, buffer, expected, squashfs_i(inode)->fragment_offset); squashfs_cache_put(buffer); return res; } -static int squashfs_readpage_sparse(struct page *page, int index, int file_end) +static int squashfs_readpage_sparse(struct page *page, int expected) { - struct inode *inode = page->mapping->host; - struct squashfs_sb_info *msblk = inode->i_sb->s_fs_info; - int bytes = index == file_end ? - (i_size_read(inode) & (msblk->block_size - 1)) : - msblk->block_size; - - squashfs_copy_cache(page, NULL, bytes, 0); + squashfs_copy_cache(page, NULL, expected, 0); return 0; } @@ -471,6 +463,9 @@ static int squashfs_readpage(struct file *file, struct page *page) struct squashfs_sb_info *msblk = inode->i_sb->s_fs_info; int index = page->index >> (msblk->block_log - PAGE_SHIFT); int file_end = i_size_read(inode) >> msblk->block_log; + int expected = index == file_end ? + (i_size_read(inode) & (msblk->block_size - 1)) : + msblk->block_size; int res; void *pageaddr; @@ -489,11 +484,11 @@ static int squashfs_readpage(struct file *file, struct page *page) goto error_out; if (bsize == 0) - res = squashfs_readpage_sparse(page, index, file_end); + res = squashfs_readpage_sparse(page, expected); else - res = squashfs_readpage_block(page, block, bsize); + res = squashfs_readpage_block(page, block, bsize, expected); } else - res = squashfs_readpage_fragment(page); + res = squashfs_readpage_fragment(page, expected); if (!res) return 0; diff --git a/fs/squashfs/file_cache.c b/fs/squashfs/file_cache.c index f2310d2a2019..a9ba8d96776a 100644 --- a/fs/squashfs/file_cache.c +++ b/fs/squashfs/file_cache.c @@ -20,7 +20,7 @@ #include "squashfs.h" /* Read separately compressed datablock and memcopy into page cache */ -int squashfs_readpage_block(struct page *page, u64 block, int bsize) +int squashfs_readpage_block(struct page *page, u64 block, int bsize, int expected) { struct inode *i = page->mapping->host; struct squashfs_cache_entry *buffer = squashfs_get_datablock(i->i_sb, @@ -31,7 +31,7 @@ int squashfs_readpage_block(struct page *page, u64 block, int bsize) ERROR("Unable to read page, block %llx, size %x\n", block, bsize); else - squashfs_copy_cache(page, buffer, buffer->length, 0); + squashfs_copy_cache(page, buffer, expected, 0); squashfs_cache_put(buffer); return res; diff --git a/fs/squashfs/file_direct.c b/fs/squashfs/file_direct.c index 096990254a2e..80db1b86a27c 100644 --- a/fs/squashfs/file_direct.c +++ b/fs/squashfs/file_direct.c @@ -21,10 +21,11 @@ #include "page_actor.h" static int squashfs_read_cache(struct page *target_page, u64 block, int bsize, - int pages, struct page **page); + int pages, struct page **page, int bytes); /* Read separately compressed datablock directly into page cache */ -int squashfs_readpage_block(struct page *target_page, u64 block, int bsize) +int squashfs_readpage_block(struct page *target_page, u64 block, int bsize, + int expected) { struct inode *inode = target_page->mapping->host; @@ -83,7 +84,7 @@ int squashfs_readpage_block(struct page *target_page, u64 block, int bsize) * using an intermediate buffer. */ res = squashfs_read_cache(target_page, block, bsize, pages, - page); + page, expected); if (res < 0) goto mark_errored; @@ -95,6 +96,11 @@ int squashfs_readpage_block(struct page *target_page, u64 block, int bsize) if (res < 0) goto mark_errored; + if (res != expected) { + res = -EIO; + goto mark_errored; + } + /* Last page may have trailing bytes not filled */ bytes = res % PAGE_SIZE; if (bytes) { @@ -138,12 +144,12 @@ out: static int squashfs_read_cache(struct page *target_page, u64 block, int bsize, - int pages, struct page **page) + int pages, struct page **page, int bytes) { struct inode *i = target_page->mapping->host; struct squashfs_cache_entry *buffer = squashfs_get_datablock(i->i_sb, block, bsize); - int bytes = buffer->length, res = buffer->error, n, offset = 0; + int res = buffer->error, n, offset = 0; if (res) { ERROR("Unable to read page, block %llx, size %x\n", block, diff --git a/fs/squashfs/squashfs.h b/fs/squashfs/squashfs.h index d8d43724cf2a..f89f8a74c6ce 100644 --- a/fs/squashfs/squashfs.h +++ b/fs/squashfs/squashfs.h @@ -72,7 +72,7 @@ void squashfs_copy_cache(struct page *, struct squashfs_cache_entry *, int, int); /* file_xxx.c */ -extern int squashfs_readpage_block(struct page *, u64, int); +extern int squashfs_readpage_block(struct page *, u64, int, int); /* id.c */ extern int squashfs_get_id(struct super_block *, unsigned int, unsigned int *); -- cgit v1.2.3 From 258fe208f2829d75ac837c17dbdc697ef653a395 Mon Sep 17 00:00:00 2001 From: Maninder Singh Date: Thu, 2 Aug 2018 15:27:27 +0530 Subject: selftest/net: fix protocol family to work for IPv4. use actual protocol family passed by user rather than hardcoded AF_INTE6 to cerate sockets. current code is not working for IPv4. Signed-off-by: Maninder Singh Signed-off-by: Vaneet Narang Reviewed-by: Eric Dumazet Signed-off-by: David S. Miller --- tools/testing/selftests/net/tcp_mmap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/tcp_mmap.c b/tools/testing/selftests/net/tcp_mmap.c index 77f762780199..e8c5dff448eb 100644 --- a/tools/testing/selftests/net/tcp_mmap.c +++ b/tools/testing/selftests/net/tcp_mmap.c @@ -402,7 +402,7 @@ int main(int argc, char *argv[]) exit(1); } - fd = socket(AF_INET6, SOCK_STREAM, 0); + fd = socket(cfg_family, SOCK_STREAM, 0); if (fd == -1) { perror("socket"); exit(1); -- cgit v1.2.3 From 79b3dbe4adb3420e74cf755b4beb5d2b43d5928d Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Thu, 2 Aug 2018 13:09:27 -0700 Subject: fs: fix iomap_bmap position calculation The position calculation in iomap_bmap() shifts bno the wrong way, so we don't progress properly and end up re-mapping block zero over and over, yielding an unchanging physical block range as the logical block advances: # filefrag -Be file ext: logical_offset: physical_offset: length: expected: flags: 0: 0.. 0: 21.. 21: 1: merged 1: 1.. 1: 21.. 21: 1: 22: merged Discontinuity: Block 1 is at 21 (was 22) 2: 2.. 2: 21.. 21: 1: 22: merged Discontinuity: Block 2 is at 21 (was 22) 3: 3.. 3: 21.. 21: 1: 22: merged This breaks the FIBMAP interface for anyone using it (XFS), which in turn breaks LILO, zipl, etc. Bug-actually-spotted-by: Darrick J. Wong Fixes: 89eb1906a953 ("iomap: add an iomap-based bmap implementation") Cc: stable@vger.kernel.org Signed-off-by: Eric Sandeen Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong --- fs/iomap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/iomap.c b/fs/iomap.c index 77397b5a96ef..0d0bd8845586 100644 --- a/fs/iomap.c +++ b/fs/iomap.c @@ -1443,7 +1443,7 @@ iomap_bmap(struct address_space *mapping, sector_t bno, const struct iomap_ops *ops) { struct inode *inode = mapping->host; - loff_t pos = bno >> inode->i_blkbits; + loff_t pos = bno << inode->i_blkbits; unsigned blocksize = i_blocksize(inode); if (filemap_write_and_wait(mapping)) -- cgit v1.2.3 From 2d5ba0e2de24ec87636244a01d4e78d095cc1b20 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Fri, 3 Aug 2018 01:49:37 +0800 Subject: blk-mq: fix blk_mq_tagset_busy_iter Commit d250bf4e776ff09d5("blk-mq: only iterate over inflight requests in blk_mq_tagset_busy_iter") uses 'blk_mq_rq_state(rq) == MQ_RQ_IN_FLIGHT' to replace 'blk_mq_request_started(req)', this way is wrong, and causes lots of test system hang during booting. Fix the issue by using blk_mq_request_started(req) inside bt_tags_iter(). Fixes: d250bf4e776ff09d5 ("blk-mq: only iterate over inflight requests in blk_mq_tagset_busy_iter") Cc: Josef Bacik Cc: Christoph Hellwig Cc: Guenter Roeck Cc: Mark Brown Cc: Matt Hart Cc: Johannes Thumshirn Cc: John Garry Cc: Hannes Reinecke , Cc: "Martin K. Petersen" , Cc: James Bottomley Cc: linux-scsi@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Bart Van Assche Tested-by: Guenter Roeck Reported-by: Mark Brown Reported-by: Guenter Roeck Signed-off-by: Ming Lei Signed-off-by: Jens Axboe --- block/blk-mq-tag.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/block/blk-mq-tag.c b/block/blk-mq-tag.c index 09b2ee6694fb..3de0836163c2 100644 --- a/block/blk-mq-tag.c +++ b/block/blk-mq-tag.c @@ -271,7 +271,7 @@ static bool bt_tags_iter(struct sbitmap *bitmap, unsigned int bitnr, void *data) * test and set the bit before assining ->rqs[]. */ rq = tags->rqs[bitnr]; - if (rq && blk_mq_rq_state(rq) == MQ_RQ_IN_FLIGHT) + if (rq && blk_mq_request_started(rq)) iter_data->fn(rq, iter_data->data, reserved); return true; -- cgit v1.2.3 From afb41bb039656f0cecb54eeb8b2e2088201295f5 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Wed, 1 Aug 2018 18:22:41 +0100 Subject: drivers: net: lmc: fix case value for target abort error Current value for a target abort error is 0x010, however, this value should in fact be 0x002. As it stands, the range of error is 0..7 so it is currently never being detected. This bug has been in the driver since the early 2.6.12 days (or before). Detected by CoverityScan, CID#744290 ("Logically dead code") Signed-off-by: Colin Ian King Signed-off-by: David S. Miller --- drivers/net/wan/lmc/lmc_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wan/lmc/lmc_main.c b/drivers/net/wan/lmc/lmc_main.c index 90a4ad9a2d08..b3a1b6f5c406 100644 --- a/drivers/net/wan/lmc/lmc_main.c +++ b/drivers/net/wan/lmc/lmc_main.c @@ -1362,7 +1362,7 @@ static irqreturn_t lmc_interrupt (int irq, void *dev_instance) /*fold00*/ case 0x001: printk(KERN_WARNING "%s: Master Abort (naughty)\n", dev->name); break; - case 0x010: + case 0x002: printk(KERN_WARNING "%s: Target Abort (not so naughty)\n", dev->name); break; default: -- cgit v1.2.3 From 7e97de0b033bcac4fa9a35cef72e0c06e6a22c67 Mon Sep 17 00:00:00 2001 From: Kirill Tkhai Date: Thu, 2 Aug 2018 15:36:01 -0700 Subject: memcg: remove memcg_cgroup::id from IDR on mem_cgroup_css_alloc() failure In case of memcg_online_kmem() failure, memcg_cgroup::id remains hashed in mem_cgroup_idr even after memcg memory is freed. This leads to leak of ID in mem_cgroup_idr. This patch adds removal into mem_cgroup_css_alloc(), which fixes the problem. For better readability, it adds a generic helper which is used in mem_cgroup_alloc() and mem_cgroup_id_put_many() as well. Link: http://lkml.kernel.org/r/152354470916.22460.14397070748001974638.stgit@localhost.localdomain Fixes 73f576c04b94 ("mm: memcontrol: fix cgroup creation failure after many small jobs") Signed-off-by: Kirill Tkhai Acked-by: Johannes Weiner Acked-by: Vladimir Davydov Cc: Michal Hocko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memcontrol.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 8c0280b3143e..b2173f7e5164 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -4037,6 +4037,14 @@ static struct cftype mem_cgroup_legacy_files[] = { static DEFINE_IDR(mem_cgroup_idr); +static void mem_cgroup_id_remove(struct mem_cgroup *memcg) +{ + if (memcg->id.id > 0) { + idr_remove(&mem_cgroup_idr, memcg->id.id); + memcg->id.id = 0; + } +} + static void mem_cgroup_id_get_many(struct mem_cgroup *memcg, unsigned int n) { VM_BUG_ON(atomic_read(&memcg->id.ref) <= 0); @@ -4047,8 +4055,7 @@ static void mem_cgroup_id_put_many(struct mem_cgroup *memcg, unsigned int n) { VM_BUG_ON(atomic_read(&memcg->id.ref) < n); if (atomic_sub_and_test(n, &memcg->id.ref)) { - idr_remove(&mem_cgroup_idr, memcg->id.id); - memcg->id.id = 0; + mem_cgroup_id_remove(memcg); /* Memcg ID pins CSS */ css_put(&memcg->css); @@ -4185,8 +4192,7 @@ static struct mem_cgroup *mem_cgroup_alloc(void) idr_replace(&mem_cgroup_idr, memcg, memcg->id.id); return memcg; fail: - if (memcg->id.id > 0) - idr_remove(&mem_cgroup_idr, memcg->id.id); + mem_cgroup_id_remove(memcg); __mem_cgroup_free(memcg); return NULL; } @@ -4245,6 +4251,7 @@ mem_cgroup_css_alloc(struct cgroup_subsys_state *parent_css) return &memcg->css; fail: + mem_cgroup_id_remove(memcg); mem_cgroup_free(memcg); return ERR_PTR(-ENOMEM); } -- cgit v1.2.3 From eec3636ad198d4ac61e574cb122cb67e9bef5492 Mon Sep 17 00:00:00 2001 From: Jane Chu Date: Thu, 2 Aug 2018 15:36:05 -0700 Subject: ipc/shm.c add ->pagesize function to shm_vm_ops MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 05ea88608d4e ("mm, hugetlbfs: introduce ->pagesize() to vm_operations_struct") adds a new ->pagesize() function to hugetlb_vm_ops, intended to cover all hugetlbfs backed files. With System V shared memory model, if "huge page" is specified, the "shared memory" is backed by hugetlbfs files, but the mappings initiated via shmget/shmat have their original vm_ops overwritten with shm_vm_ops, so we need to add a ->pagesize function to shm_vm_ops. Otherwise, vma_kernel_pagesize() returns PAGE_SIZE given a hugetlbfs backed vma, result in below BUG: fs/hugetlbfs/inode.c 443 if (unlikely(page_mapped(page))) { 444 BUG_ON(truncate_op); resulting in hugetlbfs: oracle (4592): Using mlock ulimits for SHM_HUGETLB is deprecated ------------[ cut here ]------------ kernel BUG at fs/hugetlbfs/inode.c:444! Modules linked in: nfsv3 rpcsec_gss_krb5 nfsv4 ... CPU: 35 PID: 5583 Comm: oracle_5583_sbt Not tainted 4.14.35-1829.el7uek.x86_64 #2 RIP: 0010:remove_inode_hugepages+0x3db/0x3e2 .... Call Trace: hugetlbfs_evict_inode+0x1e/0x3e evict+0xdb/0x1af iput+0x1a2/0x1f7 dentry_unlink_inode+0xc6/0xf0 __dentry_kill+0xd8/0x18d dput+0x1b5/0x1ed __fput+0x18b/0x216 ____fput+0xe/0x10 task_work_run+0x90/0xa7 exit_to_usermode_loop+0xdd/0x116 do_syscall_64+0x187/0x1ae entry_SYSCALL_64_after_hwframe+0x150/0x0 [jane.chu@oracle.com: relocate comment] Link: http://lkml.kernel.org/r/20180731044831.26036-1-jane.chu@oracle.com Link: http://lkml.kernel.org/r/20180727211727.5020-1-jane.chu@oracle.com Fixes: 05ea88608d4e13 ("mm, hugetlbfs: introduce ->pagesize() to vm_operations_struct") Signed-off-by: Jane Chu Suggested-by: Mike Kravetz Reviewed-by: Mike Kravetz Acked-by: Davidlohr Bueso Acked-by: Michal Hocko Cc: Dan Williams Cc: Jan Kara Cc: Jérôme Glisse Cc: Manfred Spraul Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- ipc/shm.c | 12 ++++++++++++ mm/hugetlb.c | 7 +++++++ 2 files changed, 19 insertions(+) diff --git a/ipc/shm.c b/ipc/shm.c index 051a3e1fb8df..fefa00d310fb 100644 --- a/ipc/shm.c +++ b/ipc/shm.c @@ -427,6 +427,17 @@ static int shm_split(struct vm_area_struct *vma, unsigned long addr) return 0; } +static unsigned long shm_pagesize(struct vm_area_struct *vma) +{ + struct file *file = vma->vm_file; + struct shm_file_data *sfd = shm_file_data(file); + + if (sfd->vm_ops->pagesize) + return sfd->vm_ops->pagesize(vma); + + return PAGE_SIZE; +} + #ifdef CONFIG_NUMA static int shm_set_policy(struct vm_area_struct *vma, struct mempolicy *new) { @@ -554,6 +565,7 @@ static const struct vm_operations_struct shm_vm_ops = { .close = shm_close, /* callback for when the vm-area is released */ .fault = shm_fault, .split = shm_split, + .pagesize = shm_pagesize, #if defined(CONFIG_NUMA) .set_policy = shm_set_policy, .get_policy = shm_get_policy, diff --git a/mm/hugetlb.c b/mm/hugetlb.c index 039ddbc574e9..3103099f64fd 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -3167,6 +3167,13 @@ static vm_fault_t hugetlb_vm_op_fault(struct vm_fault *vmf) return 0; } +/* + * When a new function is introduced to vm_operations_struct and added + * to hugetlb_vm_ops, please consider adding the function to shm_vm_ops. + * This is because under System V memory model, mappings created via + * shmget/shmat with "huge page" specified are backed by hugetlbfs files, + * their original vm_ops are overwritten with shm_vm_ops. + */ const struct vm_operations_struct hugetlb_vm_ops = { .fault = hugetlb_vm_op_fault, .open = hugetlb_vm_op_open, -- cgit v1.2.3 From 31e810aa1033a7db50a2746cd34a2432237f6420 Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Thu, 2 Aug 2018 15:36:09 -0700 Subject: userfaultfd: remove uffd flags from vma->vm_flags if UFFD_EVENT_FORK fails The fix in commit 0cbb4b4f4c44 ("userfaultfd: clear the vma->vm_userfaultfd_ctx if UFFD_EVENT_FORK fails") cleared the vma->vm_userfaultfd_ctx but kept userfaultfd flags in vma->vm_flags that were copied from the parent process VMA. As the result, there is an inconsistency between the values of vma->vm_userfaultfd_ctx.ctx and vma->vm_flags which triggers BUG_ON in userfaultfd_release(). Clearing the uffd flags from vma->vm_flags in case of UFFD_EVENT_FORK failure resolves the issue. Link: http://lkml.kernel.org/r/1532931975-25473-1-git-send-email-rppt@linux.vnet.ibm.com Fixes: 0cbb4b4f4c44 ("userfaultfd: clear the vma->vm_userfaultfd_ctx if UFFD_EVENT_FORK fails") Signed-off-by: Mike Rapoport Reported-by: syzbot+121be635a7a35ddb7dcb@syzkaller.appspotmail.com Cc: Andrea Arcangeli Cc: Eric Biggers Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/userfaultfd.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/userfaultfd.c b/fs/userfaultfd.c index 594d192b2331..bad9cea37f12 100644 --- a/fs/userfaultfd.c +++ b/fs/userfaultfd.c @@ -633,8 +633,10 @@ static void userfaultfd_event_wait_completion(struct userfaultfd_ctx *ctx, /* the various vma->vm_userfaultfd_ctx still points to it */ down_write(&mm->mmap_sem); for (vma = mm->mmap; vma; vma = vma->vm_next) - if (vma->vm_userfaultfd_ctx.ctx == release_new_ctx) + if (vma->vm_userfaultfd_ctx.ctx == release_new_ctx) { vma->vm_userfaultfd_ctx = NULL_VM_UFFD_CTX; + vma->vm_flags &= ~(VM_UFFD_WP | VM_UFFD_MISSING); + } up_write(&mm->mmap_sem); userfaultfd_ctx_put(release_new_ctx); -- cgit v1.2.3 From 8c85cbdf371f9ddf256ecc5d9548b26ee8fcfe2f Mon Sep 17 00:00:00 2001 From: Mathieu Xhonneux Date: Wed, 1 Aug 2018 15:34:54 +0000 Subject: selftests/bpf: update test_lwt_seg6local.sh according to iproute2 The shell file for test_lwt_seg6local contains an early iproute2 syntax for installing a seg6local End.BPF route. iproute2 support for this feature has recently been upstreamed, but with an additional keyword required. This patch updates test_lwt_seg6local.sh to the definitive iproute2 syntax Signed-off-by: Mathieu Xhonneux Acked-by: Yonghong Song Signed-off-by: Daniel Borkmann --- tools/testing/selftests/bpf/test_lwt_seg6local.sh | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/bpf/test_lwt_seg6local.sh b/tools/testing/selftests/bpf/test_lwt_seg6local.sh index 270fa8f49573..785eabf2a593 100755 --- a/tools/testing/selftests/bpf/test_lwt_seg6local.sh +++ b/tools/testing/selftests/bpf/test_lwt_seg6local.sh @@ -115,14 +115,14 @@ ip netns exec ns2 ip -6 route add fb00::6 encap bpf in obj test_lwt_seg6local.o ip netns exec ns2 ip -6 route add fd00::1 dev veth3 via fb00::43 scope link ip netns exec ns3 ip -6 route add fc42::1 dev veth5 via fb00::65 -ip netns exec ns3 ip -6 route add fd00::1 encap seg6local action End.BPF obj test_lwt_seg6local.o sec add_egr_x dev veth4 +ip netns exec ns3 ip -6 route add fd00::1 encap seg6local action End.BPF endpoint obj test_lwt_seg6local.o sec add_egr_x dev veth4 -ip netns exec ns4 ip -6 route add fd00::2 encap seg6local action End.BPF obj test_lwt_seg6local.o sec pop_egr dev veth6 +ip netns exec ns4 ip -6 route add fd00::2 encap seg6local action End.BPF endpoint obj test_lwt_seg6local.o sec pop_egr dev veth6 ip netns exec ns4 ip -6 addr add fc42::1 dev lo ip netns exec ns4 ip -6 route add fd00::3 dev veth7 via fb00::87 ip netns exec ns5 ip -6 route add fd00::4 table 117 dev veth9 via fb00::109 -ip netns exec ns5 ip -6 route add fd00::3 encap seg6local action End.BPF obj test_lwt_seg6local.o sec inspect_t dev veth8 +ip netns exec ns5 ip -6 route add fd00::3 encap seg6local action End.BPF endpoint obj test_lwt_seg6local.o sec inspect_t dev veth8 ip netns exec ns6 ip -6 addr add fb00::6/16 dev lo ip netns exec ns6 ip -6 addr add fd00::4/16 dev lo -- cgit v1.2.3 From 26a6dce8ef99b0199e7682d1c203cf7d0b5fd5b0 Mon Sep 17 00:00:00 2001 From: Yong Zhi Date: Thu, 2 Aug 2018 18:21:31 -0500 Subject: ASoC: Intel: bxt: Use refcap device for mono recording The refcap capture device supports mono recording only, this patch adds the channel constraints. Signed-off-by: Yong Zhi Reviewed-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- sound/soc/intel/boards/bxt_da7219_max98357a.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/sound/soc/intel/boards/bxt_da7219_max98357a.c b/sound/soc/intel/boards/bxt_da7219_max98357a.c index be6e4b40bf03..6f052fc8d1e2 100644 --- a/sound/soc/intel/boards/bxt_da7219_max98357a.c +++ b/sound/soc/intel/boards/bxt_da7219_max98357a.c @@ -324,8 +324,22 @@ static const struct snd_pcm_hw_constraint_list constraints_16000 = { .list = rates_16000, }; +static const unsigned int ch_mono[] = { + 1, +}; + +static const struct snd_pcm_hw_constraint_list constraints_refcap = { + .count = ARRAY_SIZE(ch_mono), + .list = ch_mono, +}; + static int broxton_refcap_startup(struct snd_pcm_substream *substream) { + substream->runtime->hw.channels_max = 1; + snd_pcm_hw_constraint_list(substream->runtime, 0, + SNDRV_PCM_HW_PARAM_CHANNELS, + &constraints_refcap); + return snd_pcm_hw_constraint_list(substream->runtime, 0, SNDRV_PCM_HW_PARAM_RATE, &constraints_16000); -- cgit v1.2.3 From d1f0301b3333eef5efbfa1fe0f0edbea01863d5d Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 3 Aug 2018 14:44:59 +0200 Subject: genirq: Make force irq threading setup more robust The support of force threading interrupts which are set up with both a primary and a threaded handler wreckaged the setup of regular requested threaded interrupts (primary handler == NULL). The reason is that it does not check whether the primary handler is set to the default handler which wakes the handler thread. Instead it replaces the thread handler with the primary handler as it would do with force threaded interrupts which have been requested via request_irq(). So both the primary and the thread handler become the same which then triggers the warnon that the thread handler tries to wakeup a not configured secondary thread. Fortunately this only happens when the driver omits the IRQF_ONESHOT flag when requesting the threaded interrupt, which is normaly caught by the sanity checks when force irq threading is disabled. Fix it by skipping the force threading setup when a regular threaded interrupt is requested. As a consequence the interrupt request which lacks the IRQ_ONESHOT flag is rejected correctly instead of silently wreckaging it. Fixes: 2a1d3ab8986d ("genirq: Handle force threading of irqs with primary and thread handler") Reported-by: Kurt Kanzenbach Signed-off-by: Thomas Gleixner Tested-by: Kurt Kanzenbach Cc: stable@vger.kernel.org --- kernel/irq/manage.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c index daeabd791d58..9a8b7ba9aa88 100644 --- a/kernel/irq/manage.c +++ b/kernel/irq/manage.c @@ -1068,6 +1068,13 @@ static int irq_setup_forced_threading(struct irqaction *new) if (new->flags & (IRQF_NO_THREAD | IRQF_PERCPU | IRQF_ONESHOT)) return 0; + /* + * No further action required for interrupts which are requested as + * threaded interrupts already + */ + if (new->handler == irq_default_primary_handler) + return 0; + new->flags |= IRQF_ONESHOT; /* @@ -1075,7 +1082,7 @@ static int irq_setup_forced_threading(struct irqaction *new) * thread handler. We force thread them as well by creating a * secondary action. */ - if (new->handler != irq_default_primary_handler && new->thread_fn) { + if (new->handler && new->thread_fn) { /* Allocate the secondary action */ new->secondary = kzalloc(sizeof(struct irqaction), GFP_KERNEL); if (!new->secondary) -- cgit v1.2.3 From 0a0e0829f990120cef165bbb804237f400953ec2 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Fri, 3 Aug 2018 15:31:34 +0200 Subject: nohz: Fix missing tick reprogram when interrupting an inline softirq The full nohz tick is reprogrammed in irq_exit() only if the exit is not in a nesting interrupt. This stands as an optimization: whether a hardirq or a softirq is interrupted, the tick is going to be reprogrammed when necessary at the end of the inner interrupt, with even potential new updates on the timer queue. When soft interrupts are interrupted, it's assumed that they are executing on the tail of an interrupt return. In that case tick_nohz_irq_exit() is called after softirq processing to take care of the tick reprogramming. But the assumption is wrong: softirqs can be processed inline as well, ie: outside of an interrupt, like in a call to local_bh_enable() or from ksoftirqd. Inline softirqs don't reprogram the tick once they are done, as opposed to interrupt tail softirq processing. So if a tick interrupts an inline softirq processing, the next timer will neither be reprogrammed from the interrupting tick's irq_exit() nor after the interrupted softirq processing. This situation may leave the tick unprogrammed while timers are armed. To fix this, simply keep reprogramming the tick even if a softirq has been interrupted. That can be optimized further, but for now correctness is more important. Note that new timers enqueued in nohz_full mode after a softirq gets interrupted will still be handled just fine through self-IPIs triggered by the timer code. Reported-by: Anna-Maria Gleixner Signed-off-by: Frederic Weisbecker Signed-off-by: Thomas Gleixner Tested-by: Anna-Maria Gleixner Cc: stable@vger.kernel.org # 4.14+ Link: https://lkml.kernel.org/r/1533303094-15855-1-git-send-email-frederic@kernel.org --- kernel/softirq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/softirq.c b/kernel/softirq.c index 75ffc1d1a2e0..6f584861d329 100644 --- a/kernel/softirq.c +++ b/kernel/softirq.c @@ -390,7 +390,7 @@ static inline void tick_irq_exit(void) /* Make sure that timer wheel updates are propagated */ if ((idle_cpu(cpu) && !need_resched()) || tick_nohz_full_cpu(cpu)) { - if (!in_interrupt()) + if (!in_irq()) tick_nohz_irq_exit(); } #endif -- cgit v1.2.3 From 8530ebf1079ccc84ffa32d970cdcae168b2f3684 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Fri, 3 Aug 2018 08:42:11 -0500 Subject: ASoC: smd845: fix memory leak In case memory resources for *card* were allocated, release them before return. Addresses-Coverity-ID: 1472244 ("Resource leak") Fixes: 6b1687bf76ef ("ASoC: qcom: add sdm845 sound card support") Signed-off-by: Gustavo A. R. Silva Signed-off-by: Mark Brown --- sound/soc/qcom/sdm845.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/sound/soc/qcom/sdm845.c b/sound/soc/qcom/sdm845.c index be0cb1122036..c1adb77230eb 100644 --- a/sound/soc/qcom/sdm845.c +++ b/sound/soc/qcom/sdm845.c @@ -222,8 +222,10 @@ static int sdm845_snd_platform_probe(struct platform_device *pdev) /* Allocate the private data */ data = kzalloc(sizeof(*data), GFP_KERNEL); - if (!data) - return -ENOMEM; + if (!data) { + ret = -ENOMEM; + goto data_alloc_fail; + } card->dev = dev; dev_set_drvdata(dev, card); @@ -248,6 +250,7 @@ register_card_fail: kfree(card->dai_link); parse_dt_fail: kfree(data); +data_alloc_fail: kfree(card); return ret; } -- cgit v1.2.3 From 3b7c88fcc2873eba64f9e8cef34c4af0cba20887 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Fri, 3 Aug 2018 11:28:24 -0500 Subject: ASoC: davinci-i2s: mark expected switch fall-through In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1364478 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva Signed-off-by: Mark Brown --- sound/soc/davinci/davinci-i2s.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/davinci/davinci-i2s.c b/sound/soc/davinci/davinci-i2s.c index 807040bb3921..a3206e65e5e5 100644 --- a/sound/soc/davinci/davinci-i2s.c +++ b/sound/soc/davinci/davinci-i2s.c @@ -340,6 +340,7 @@ static int davinci_i2s_set_dai_fmt(struct snd_soc_dai *cpu_dai, * rate is lowered. */ inv_fs = true; + /* fall through */ case SND_SOC_DAIFMT_DSP_A: dev->mode = MOD_DSP_A; break; -- cgit v1.2.3 From 85c81941d5033fc8a68646823d3157840c9de8b3 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Fri, 3 Aug 2018 11:32:52 -0500 Subject: ASoC: omap-mcpdm: Mark expected switch fall-throughs In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1369526 ("Missing break in switch") Addresses-Coverity-ID: 1369529 ("Missing break in switch") Addresses-Coverity-ID: 1451415 ("Missing break in switch") Addresses-Coverity-ID: 115103 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva Signed-off-by: Mark Brown --- sound/soc/omap/omap-mcpdm.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/sound/soc/omap/omap-mcpdm.c b/sound/soc/omap/omap-mcpdm.c index 0e97360f9890..4c1be36c2207 100644 --- a/sound/soc/omap/omap-mcpdm.c +++ b/sound/soc/omap/omap-mcpdm.c @@ -310,15 +310,19 @@ static int omap_mcpdm_dai_hw_params(struct snd_pcm_substream *substream, /* up to 3 channels for capture */ return -EINVAL; link_mask |= 1 << 4; + /* fall through */ case 4: if (stream == SNDRV_PCM_STREAM_CAPTURE) /* up to 3 channels for capture */ return -EINVAL; link_mask |= 1 << 3; + /* fall through */ case 3: link_mask |= 1 << 2; + /* fall through */ case 2: link_mask |= 1 << 1; + /* fall through */ case 1: link_mask |= 1 << 0; break; -- cgit v1.2.3 From 1a12d5dc7dd1ffd985503f9770b736fb03db2e3f Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Fri, 3 Aug 2018 11:34:30 -0500 Subject: ASoC: core: mark expected switch fall-through In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 146568 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva Signed-off-by: Mark Brown --- sound/soc/soc-core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 82eb3868be67..9cfe10d8040c 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -528,6 +528,7 @@ int snd_soc_suspend(struct device *dev) "ASoC: idle_bias_off CODEC on over suspend\n"); break; } + /* fall through */ case SND_SOC_BIAS_OFF: if (component->driver->suspend) -- cgit v1.2.3 From 16bbeb2b43c3f5d69e1348477e75a24ae6d55d5a Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Fri, 3 Aug 2018 11:29:53 -0500 Subject: ASoC: fsl_esai: Mark expected switch fall-through In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1222121 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva Signed-off-by: Mark Brown --- sound/soc/fsl/fsl_esai.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/fsl/fsl_esai.c b/sound/soc/fsl/fsl_esai.c index 8f43110373b8..c1d1d06783e5 100644 --- a/sound/soc/fsl/fsl_esai.c +++ b/sound/soc/fsl/fsl_esai.c @@ -249,6 +249,7 @@ static int fsl_esai_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id, break; case ESAI_HCKT_EXTAL: ecr |= ESAI_ECR_ETI; + /* fall through */ case ESAI_HCKR_EXTAL: ecr |= ESAI_ECR_ERI; break; -- cgit v1.2.3 From a773c3b6be185d171e2755ac715e8b1ea099ebbc Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Fri, 3 Aug 2018 11:31:48 -0500 Subject: ASoC: omap-dmic: Mark expected switch fall-throughs In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1468847 ("Missing break in switch") Addresses-Coverity-ID: 1468849 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva Signed-off-by: Mark Brown --- sound/soc/omap/omap-dmic.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/omap/omap-dmic.c b/sound/soc/omap/omap-dmic.c index 51dd7c65096b..fe966272bd0c 100644 --- a/sound/soc/omap/omap-dmic.c +++ b/sound/soc/omap/omap-dmic.c @@ -213,8 +213,10 @@ static int omap_dmic_dai_hw_params(struct snd_pcm_substream *substream, switch (channels) { case 6: dmic->ch_enabled |= OMAP_DMIC_UP3_ENABLE; + /* fall through */ case 4: dmic->ch_enabled |= OMAP_DMIC_UP2_ENABLE; + /* fall through */ case 2: dmic->ch_enabled |= OMAP_DMIC_UP1_ENABLE; break; -- cgit v1.2.3 From 5019027a566de4986a7f66017cf0d6d794fc155f Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Fri, 3 Aug 2018 11:33:57 -0500 Subject: ASoC: samsung: i2s: Mark expected switch fall-through In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1381093 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva Signed-off-by: Mark Brown --- sound/soc/samsung/i2s.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/samsung/i2s.c b/sound/soc/samsung/i2s.c index f914ed45db7d..d6c62aa13041 100644 --- a/sound/soc/samsung/i2s.c +++ b/sound/soc/samsung/i2s.c @@ -710,6 +710,7 @@ static int i2s_hw_params(struct snd_pcm_substream *substream, switch (params_channels(params)) { case 6: val |= MOD_DC2_EN; + /* fall through */ case 4: val |= MOD_DC1_EN; break; -- cgit v1.2.3 From 3757b255bf20ae3c941abae7624ff215bfd9ef05 Mon Sep 17 00:00:00 2001 From: Nir Dotan Date: Fri, 3 Aug 2018 15:57:41 +0300 Subject: mlxsw: core_acl_flex_actions: Return error for conflicting actions Spectrum switch ACL action set is built in groups of three actions which may point to additional actions. A group holds a single record which can be set as goto record for pointing at a following group or can be set to mark the termination of the lookup. This is perfectly adequate for handling a series of actions to be executed on a packet. While the SW model allows configuration of conflicting actions where it is clear that some actions will never execute, the mlxsw driver must block such configurations as it creates a conflict over the single terminate/goto record value. For a conflicting actions configuration such as: # tc filter add dev swp49 parent ffff: \ protocol ip pref 10 \ flower skip_sw dst_ip 192.168.101.1 \ action goto chain 100 \ action mirred egress mirror dev swp4 Where it is clear that the last action will never execute, the mlxsw driver was issuing a warning instead of returning an error. Therefore replace that warning with an error for this specific case. Fixes: 4cda7d8d7098 ("mlxsw: core: Introduce flexible actions support") Signed-off-by: Nir Dotan Reviewed-by: Jiri Pirko Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller --- .../mellanox/mlxsw/core_acl_flex_actions.c | 42 +++++++++++----------- 1 file changed, 21 insertions(+), 21 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_actions.c b/drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_actions.c index 3c0d882ba183..ce280680258e 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_actions.c +++ b/drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_actions.c @@ -626,8 +626,8 @@ static char *mlxsw_afa_block_append_action(struct mlxsw_afa_block *block, char *oneact; char *actions; - if (WARN_ON(block->finished)) - return NULL; + if (block->finished) + return ERR_PTR(-EINVAL); if (block->cur_act_index + action_size > block->afa->max_acts_per_set) { struct mlxsw_afa_set *set; @@ -637,7 +637,7 @@ static char *mlxsw_afa_block_append_action(struct mlxsw_afa_block *block, */ set = mlxsw_afa_set_create(false); if (!set) - return NULL; + return ERR_PTR(-ENOBUFS); set->prev = block->cur_set; block->cur_act_index = 0; block->cur_set->next = set; @@ -724,8 +724,8 @@ int mlxsw_afa_block_append_vlan_modify(struct mlxsw_afa_block *block, MLXSW_AFA_VLAN_CODE, MLXSW_AFA_VLAN_SIZE); - if (!act) - return -ENOBUFS; + if (IS_ERR(act)) + return PTR_ERR(act); mlxsw_afa_vlan_pack(act, MLXSW_AFA_VLAN_VLAN_TAG_CMD_NOP, MLXSW_AFA_VLAN_CMD_SET_OUTER, vid, MLXSW_AFA_VLAN_CMD_SET_OUTER, pcp, @@ -806,8 +806,8 @@ int mlxsw_afa_block_append_drop(struct mlxsw_afa_block *block) MLXSW_AFA_TRAPDISC_CODE, MLXSW_AFA_TRAPDISC_SIZE); - if (!act) - return -ENOBUFS; + if (IS_ERR(act)) + return PTR_ERR(act); mlxsw_afa_trapdisc_pack(act, MLXSW_AFA_TRAPDISC_TRAP_ACTION_NOP, MLXSW_AFA_TRAPDISC_FORWARD_ACTION_DISCARD, 0); return 0; @@ -820,8 +820,8 @@ int mlxsw_afa_block_append_trap(struct mlxsw_afa_block *block, u16 trap_id) MLXSW_AFA_TRAPDISC_CODE, MLXSW_AFA_TRAPDISC_SIZE); - if (!act) - return -ENOBUFS; + if (IS_ERR(act)) + return PTR_ERR(act); mlxsw_afa_trapdisc_pack(act, MLXSW_AFA_TRAPDISC_TRAP_ACTION_TRAP, MLXSW_AFA_TRAPDISC_FORWARD_ACTION_DISCARD, trap_id); @@ -836,8 +836,8 @@ int mlxsw_afa_block_append_trap_and_forward(struct mlxsw_afa_block *block, MLXSW_AFA_TRAPDISC_CODE, MLXSW_AFA_TRAPDISC_SIZE); - if (!act) - return -ENOBUFS; + if (IS_ERR(act)) + return PTR_ERR(act); mlxsw_afa_trapdisc_pack(act, MLXSW_AFA_TRAPDISC_TRAP_ACTION_TRAP, MLXSW_AFA_TRAPDISC_FORWARD_ACTION_FORWARD, trap_id); @@ -908,8 +908,8 @@ mlxsw_afa_block_append_allocated_mirror(struct mlxsw_afa_block *block, char *act = mlxsw_afa_block_append_action(block, MLXSW_AFA_TRAPDISC_CODE, MLXSW_AFA_TRAPDISC_SIZE); - if (!act) - return -ENOBUFS; + if (IS_ERR(act)) + return PTR_ERR(act); mlxsw_afa_trapdisc_pack(act, MLXSW_AFA_TRAPDISC_TRAP_ACTION_NOP, MLXSW_AFA_TRAPDISC_FORWARD_ACTION_FORWARD, 0); mlxsw_afa_trapdisc_mirror_pack(act, true, mirror_agent); @@ -996,8 +996,8 @@ int mlxsw_afa_block_append_fwd(struct mlxsw_afa_block *block, act = mlxsw_afa_block_append_action(block, MLXSW_AFA_FORWARD_CODE, MLXSW_AFA_FORWARD_SIZE); - if (!act) { - err = -ENOBUFS; + if (IS_ERR(act)) { + err = PTR_ERR(act); goto err_append_action; } mlxsw_afa_forward_pack(act, MLXSW_AFA_FORWARD_TYPE_PBS, @@ -1052,8 +1052,8 @@ int mlxsw_afa_block_append_allocated_counter(struct mlxsw_afa_block *block, { char *act = mlxsw_afa_block_append_action(block, MLXSW_AFA_POLCNT_CODE, MLXSW_AFA_POLCNT_SIZE); - if (!act) - return -ENOBUFS; + if (IS_ERR(act)) + return PTR_ERR(act); mlxsw_afa_polcnt_pack(act, MLXSW_AFA_POLCNT_COUNTER_SET_TYPE_PACKETS_BYTES, counter_index); return 0; @@ -1123,8 +1123,8 @@ int mlxsw_afa_block_append_fid_set(struct mlxsw_afa_block *block, u16 fid) char *act = mlxsw_afa_block_append_action(block, MLXSW_AFA_VIRFWD_CODE, MLXSW_AFA_VIRFWD_SIZE); - if (!act) - return -ENOBUFS; + if (IS_ERR(act)) + return PTR_ERR(act); mlxsw_afa_virfwd_pack(act, MLXSW_AFA_VIRFWD_FID_CMD_SET, fid); return 0; } @@ -1193,8 +1193,8 @@ int mlxsw_afa_block_append_mcrouter(struct mlxsw_afa_block *block, char *act = mlxsw_afa_block_append_action(block, MLXSW_AFA_MCROUTER_CODE, MLXSW_AFA_MCROUTER_SIZE); - if (!act) - return -ENOBUFS; + if (IS_ERR(act)) + return PTR_ERR(act); mlxsw_afa_mcrouter_pack(act, MLXSW_AFA_MCROUTER_RPF_ACTION_TRAP, expected_irif, min_mtu, rmid_valid, kvdl_index); return 0; -- cgit v1.2.3 From dda0a3a3fb92451d4a922e56365ee1f73c8a9586 Mon Sep 17 00:00:00 2001 From: Nir Dotan Date: Fri, 3 Aug 2018 15:57:42 +0300 Subject: mlxsw: core_acl_flex_actions: Remove redundant resource destruction Some ACL actions require the allocation of a separate resource prior to applying the action itself. When facing an error condition during the setup phase of the action, resource should be destroyed. For such actions the destruction was done twice which is dangerous and lead to a potential crash. The destruction took place first upon error on action setup phase and then as the rule was destroyed. The following sequence generated a crash: # tc qdisc add dev swp49 ingress # tc filter add dev swp49 parent ffff: \ protocol ip chain 100 pref 10 \ flower skip_sw dst_ip 192.168.101.1 action drop # tc filter add dev swp49 parent ffff: \ protocol ip pref 10 \ flower skip_sw dst_ip 192.168.101.1 action goto chain 100 \ action mirred egress mirror dev swp4 Therefore add mlxsw_afa_resource_del() as a complement of mlxsw_afa_resource_add() to add symmetry to resource_list membership handling. Call this from mlxsw_afa_fwd_entry_ref_destroy() to make the _fwd_entry_ref_create() and _fwd_entry_ref_destroy() pair of calls a NOP. Fixes: 140ce421217e ("mlxsw: core: Convert fwd_entry_ref list to be generic per-block resource list") Signed-off-by: Nir Dotan Reviewed-by: Jiri Pirko Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_actions.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_actions.c b/drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_actions.c index ce280680258e..d664cc0289c2 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_actions.c +++ b/drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_actions.c @@ -327,12 +327,16 @@ static void mlxsw_afa_resource_add(struct mlxsw_afa_block *block, list_add(&resource->list, &block->resource_list); } +static void mlxsw_afa_resource_del(struct mlxsw_afa_resource *resource) +{ + list_del(&resource->list); +} + static void mlxsw_afa_resources_destroy(struct mlxsw_afa_block *block) { struct mlxsw_afa_resource *resource, *tmp; list_for_each_entry_safe(resource, tmp, &block->resource_list, list) { - list_del(&resource->list); resource->destructor(block, resource); } } @@ -530,6 +534,7 @@ static void mlxsw_afa_fwd_entry_ref_destroy(struct mlxsw_afa_block *block, struct mlxsw_afa_fwd_entry_ref *fwd_entry_ref) { + mlxsw_afa_resource_del(&fwd_entry_ref->resource); mlxsw_afa_fwd_entry_put(block->afa, fwd_entry_ref->fwd_entry); kfree(fwd_entry_ref); } -- cgit v1.2.3 From 7cc6169493990dec488eda0a3f6612729ca25e81 Mon Sep 17 00:00:00 2001 From: Nir Dotan Date: Fri, 3 Aug 2018 15:57:43 +0300 Subject: mlxsw: core_acl_flex_actions: Remove redundant counter destruction Each tc flower rule uses a hidden count action. As counter resource may not be available due to limited HW resources, update _counter_create() and _counter_destroy() pair to follow previously introduced symmetric error condition handling, add a call to mlxsw_afa_resource_del() as part of the counter resource destruction. Fixes: c18c1e186ba8 ("mlxsw: core: Make counter index allocated inside the action append") Signed-off-by: Nir Dotan Reviewed-by: Petr Machata Reviewed-by: Jiri Pirko Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_actions.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_actions.c b/drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_actions.c index d664cc0289c2..a54f23f00a5f 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_actions.c +++ b/drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_actions.c @@ -584,6 +584,7 @@ static void mlxsw_afa_counter_destroy(struct mlxsw_afa_block *block, struct mlxsw_afa_counter *counter) { + mlxsw_afa_resource_del(&counter->resource); block->afa->ops->counter_index_put(block->afa->ops_priv, counter->counter_index); kfree(counter); -- cgit v1.2.3 From caebd1b389708bf3d0465be829480fc706a68720 Mon Sep 17 00:00:00 2001 From: Nir Dotan Date: Fri, 3 Aug 2018 15:57:44 +0300 Subject: mlxsw: core_acl_flex_actions: Remove redundant mirror resource destruction In previous patch mlxsw_afa_resource_del() was added to avoid a duplicate resource detruction scenario. For mirror actions, such duplicate destruction leads to a crash as in: # tc qdisc add dev swp49 ingress # tc filter add dev swp49 parent ffff: \ protocol ip chain 100 pref 10 \ flower skip_sw dst_ip 192.168.101.1 action drop # tc filter add dev swp49 parent ffff: \ protocol ip pref 10 \ flower skip_sw dst_ip 192.168.101.1 action goto chain 100 \ action mirred egress mirror dev swp4 Therefore add a call to mlxsw_afa_resource_del() in mlxsw_afa_mirror_destroy() in order to clear that resource from rule's resources. Fixes: d0d13c1858a1 ("mlxsw: spectrum_acl: Add support for mirror action") Signed-off-by: Nir Dotan Reviewed-by: Jiri Pirko Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_actions.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_actions.c b/drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_actions.c index a54f23f00a5f..f6f6a568d66a 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_actions.c +++ b/drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_actions.c @@ -862,6 +862,7 @@ static void mlxsw_afa_mirror_destroy(struct mlxsw_afa_block *block, struct mlxsw_afa_mirror *mirror) { + mlxsw_afa_resource_del(&mirror->resource); block->afa->ops->mirror_del(block->afa->ops_priv, mirror->local_in_port, mirror->span_id, -- cgit v1.2.3 From f664e37dcc525768280cb94321424a09beb1c992 Mon Sep 17 00:00:00 2001 From: Guillaume Nault Date: Fri, 3 Aug 2018 17:00:11 +0200 Subject: l2tp: fix missing refcount drop in pppol2tp_tunnel_ioctl() If 'session' is not NULL and is not a PPP pseudo-wire, then we fail to drop the reference taken by l2tp_session_get(). Fixes: ecd012e45ab5 ("l2tp: filter out non-PPP sessions in pppol2tp_tunnel_ioctl()") Signed-off-by: Guillaume Nault Signed-off-by: David S. Miller --- net/l2tp/l2tp_ppp.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/net/l2tp/l2tp_ppp.c b/net/l2tp/l2tp_ppp.c index e398797878a9..cf6cca260e7b 100644 --- a/net/l2tp/l2tp_ppp.c +++ b/net/l2tp/l2tp_ppp.c @@ -1201,13 +1201,18 @@ static int pppol2tp_tunnel_ioctl(struct l2tp_tunnel *tunnel, l2tp_session_get(sock_net(sk), tunnel, stats.session_id); - if (session && session->pwtype == L2TP_PWTYPE_PPP) { - err = pppol2tp_session_ioctl(session, cmd, - arg); + if (!session) { + err = -EBADR; + break; + } + if (session->pwtype != L2TP_PWTYPE_PPP) { l2tp_session_dec_refcount(session); - } else { err = -EBADR; + break; } + + err = pppol2tp_session_ioctl(session, cmd, arg); + l2tp_session_dec_refcount(session); break; } #ifdef CONFIG_XFRM -- cgit v1.2.3 From 961b33c244e5ba1543ae26270a1ba29f29c2db83 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Fri, 3 Aug 2018 12:52:58 -0700 Subject: jfs: Fix usercopy whitelist for inline inode data Bart Massey reported what turned out to be a usercopy whitelist false positive in JFS when symlink contents exceeded 128 bytes. The inline inode data (i_inline) is actually designed to overflow into the "extended area" following it (i_inline_ea) when needed. So the whitelist needed to be expanded to include both i_inline and i_inline_ea (the whole size of which is calculated internally using IDATASIZE, 256, instead of sizeof(i_inline), 128). $ cd /mnt/jfs $ touch $(perl -e 'print "B" x 250') $ ln -s B* b $ ls -l >/dev/null [ 249.436410] Bad or missing usercopy whitelist? Kernel memory exposure attempt detected from SLUB object 'jfs_ip' (offset 616, size 250)! Reported-by: Bart Massey Fixes: 8d2704d382a9 ("jfs: Define usercopy region in jfs_ip slab cache") Cc: Dave Kleikamp Cc: jfs-discussion@lists.sourceforge.net Cc: stable@vger.kernel.org Signed-off-by: Kees Cook --- fs/jfs/jfs_dinode.h | 7 +++++++ fs/jfs/jfs_incore.h | 1 + fs/jfs/super.c | 3 +-- 3 files changed, 9 insertions(+), 2 deletions(-) diff --git a/fs/jfs/jfs_dinode.h b/fs/jfs/jfs_dinode.h index 395c4c0d0f06..1682a87c00b2 100644 --- a/fs/jfs/jfs_dinode.h +++ b/fs/jfs/jfs_dinode.h @@ -115,6 +115,13 @@ struct dinode { dxd_t _dxd; /* 16: */ union { __le32 _rdev; /* 4: */ + /* + * The fast symlink area + * is expected to overflow + * into _inlineea when + * needed (which will clear + * INLINEEA). + */ u8 _fastsymlink[128]; } _u; u8 _inlineea[128]; diff --git a/fs/jfs/jfs_incore.h b/fs/jfs/jfs_incore.h index 1f26d1910409..9940a1e04cbf 100644 --- a/fs/jfs/jfs_incore.h +++ b/fs/jfs/jfs_incore.h @@ -87,6 +87,7 @@ struct jfs_inode_info { struct { unchar _unused[16]; /* 16: */ dxd_t _dxd; /* 16: */ + /* _inline may overflow into _inline_ea when needed */ unchar _inline[128]; /* 128: inline symlink */ /* _inline_ea may overlay the last part of * file._xtroot if maxentry = XTROOTINITSLOT diff --git a/fs/jfs/super.c b/fs/jfs/super.c index 1b9264fd54b6..f08571433aba 100644 --- a/fs/jfs/super.c +++ b/fs/jfs/super.c @@ -967,8 +967,7 @@ static int __init init_jfs_fs(void) jfs_inode_cachep = kmem_cache_create_usercopy("jfs_ip", sizeof(struct jfs_inode_info), 0, SLAB_RECLAIM_ACCOUNT|SLAB_MEM_SPREAD|SLAB_ACCOUNT, - offsetof(struct jfs_inode_info, i_inline), - sizeof_field(struct jfs_inode_info, i_inline), + offsetof(struct jfs_inode_info, i_inline), IDATASIZE, init_once); if (jfs_inode_cachep == NULL) return -ENOMEM; -- cgit v1.2.3 From 5607016cd1bbec538050b495669c3c8c5a2cee80 Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Fri, 3 Aug 2018 10:38:33 +0200 Subject: net/smc: no cursor update send in state SMC_INIT If a writer blocked condition is received without data, the current consumer cursor is immediately sent. Servers could already receive this condition in state SMC_INIT without finished tx-setup. This patch avoids sending a consumer cursor update in this case. Signed-off-by: Ursula Braun Signed-off-by: David S. Miller --- net/smc/smc_cdc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/smc/smc_cdc.c b/net/smc/smc_cdc.c index a7e8d63fc8ae..9bde1e4ca288 100644 --- a/net/smc/smc_cdc.c +++ b/net/smc/smc_cdc.c @@ -233,7 +233,8 @@ static void smc_cdc_msg_recv_action(struct smc_sock *smc, /* force immediate tx of current consumer cursor, but * under send_lock to guarantee arrival in seqno-order */ - smc_tx_sndbuf_nonempty(conn); + if (smc->sk.sk_state != SMC_INIT) + smc_tx_sndbuf_nonempty(conn); } } -- cgit v1.2.3 From 91874ecf32e41b5d86a4cb9d60e0bee50d828058 Mon Sep 17 00:00:00 2001 From: Dmitry Safonov Date: Sun, 5 Aug 2018 01:35:53 +0100 Subject: netlink: Don't shift on 64 for ngroups It's legal to have 64 groups for netlink_sock. As user-supplied nladdr->nl_groups is __u32, it's possible to subscribe only to first 32 groups. The check for correctness of .bind() userspace supplied parameter is done by applying mask made from ngroups shift. Which broke Android as they have 64 groups and the shift for mask resulted in an overflow. Fixes: 61f4b23769f0 ("netlink: Don't shift with UB on nlk->ngroups") Cc: "David S. Miller" Cc: Herbert Xu Cc: Steffen Klassert Cc: netdev@vger.kernel.org Cc: stable@vger.kernel.org Reported-and-Tested-by: Nathan Chancellor Signed-off-by: Dmitry Safonov Signed-off-by: David S. Miller --- net/netlink/af_netlink.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index c09d16870f74..56704d95f82d 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -1013,8 +1013,8 @@ static int netlink_bind(struct socket *sock, struct sockaddr *addr, if (nlk->ngroups == 0) groups = 0; - else - groups &= (1ULL << nlk->ngroups) - 1; + else if (nlk->ngroups < 8*sizeof(groups)) + groups &= (1UL << nlk->ngroups) - 1; bound = nlk->bound; if (bound) { -- cgit v1.2.3 From a32e236eb93e62a0f692e79b7c3c9636689559b9 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 3 Aug 2018 12:22:09 -0700 Subject: Partially revert "block: fail op_is_write() requests to read-only partitions" It turns out that commit 721c7fc701c7 ("block: fail op_is_write() requests to read-only partitions"), while obviously correct, causes problems for some older lvm2 installations. The reason is that the lvm snapshotting will continue to write to the snapshow COW volume, even after the volume has been marked read-only. End result: snapshot failure. This has actually been fixed in newer version of the lvm2 tool, but the old tools still exist, and the breakage was reported both in the kernel bugzilla and in the Debian bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200439 https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=900442 The lvm2 fix is here https://sourceware.org/git/?p=lvm2.git;a=commit;h=a6fdb9d9d70f51c49ad11a87ab4243344e6701a3 but until everybody has updated to recent versions, we'll have to weaken the "never write to read-only partitions" check. It now allows the write to happen, but causes a warning, something like this: generic_make_request: Trying to write to read-only block-device dm-3 (partno X) Modules linked in: nf_tables xt_cgroup xt_owner kvm_intel iwlmvm kvm irqbypass iwlwifi CPU: 1 PID: 77 Comm: kworker/1:1 Not tainted 4.17.9-gentoo #3 Hardware name: LENOVO 20B6A019RT/20B6A019RT, BIOS GJET91WW (2.41 ) 09/21/2016 Workqueue: ksnaphd do_metadata RIP: 0010:generic_make_request_checks+0x4ac/0x600 ... Call Trace: generic_make_request+0x64/0x400 submit_bio+0x6c/0x140 dispatch_io+0x287/0x430 sync_io+0xc3/0x120 dm_io+0x1f8/0x220 do_metadata+0x1d/0x30 process_one_work+0x1b9/0x3e0 worker_thread+0x2b/0x3c0 kthread+0x113/0x130 ret_from_fork+0x35/0x40 Note that this is a "revert" in behavior only. I'm leaving alone the actual code cleanups in commit 721c7fc701c7, but letting the previously uncaught request go through with a warning instead of stopping it. Fixes: 721c7fc701c7 ("block: fail op_is_write() requests to read-only partitions") Reported-and-tested-by: WGH Acked-by: Mike Snitzer Cc: Sagi Grimberg Cc: Ilya Dryomov Cc: Jens Axboe Cc: Zdenek Kabelac Signed-off-by: Linus Torvalds --- block/blk-core.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/block/blk-core.c b/block/blk-core.c index f84a9b7b6f5a..ee33590f54eb 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -2155,11 +2155,12 @@ static inline bool bio_check_ro(struct bio *bio, struct hd_struct *part) if (part->policy && op_is_write(bio_op(bio))) { char b[BDEVNAME_SIZE]; - printk(KERN_ERR + WARN_ONCE(1, "generic_make_request: Trying to write " "to read-only block-device %s (partno %d)\n", bio_devname(bio, b), part->partno); - return true; + /* Older lvm-tools actually trigger this */ + return false; } return false; -- cgit v1.2.3 From 1ffaddd029c867d134a1dde39f540dcc8c52e274 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 5 Aug 2018 12:37:41 -0700 Subject: Linux 4.18-rc8 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 85f3481a56d6..7a3c4548162b 100644 --- a/Makefile +++ b/Makefile @@ -2,7 +2,7 @@ VERSION = 4 PATCHLEVEL = 18 SUBLEVEL = 0 -EXTRAVERSION = -rc7 +EXTRAVERSION = -rc8 NAME = Merciless Moray # *DOCUMENTATION* -- cgit v1.2.3 From 038541dae968dbef99edca4b22bbb2a7b4afdc83 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Sat, 4 Aug 2018 16:49:02 -0500 Subject: ASoC: max9850: use true and false for boolean values Return statements in functions returning bool should use true or false instead of an integer value. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva Signed-off-by: Mark Brown --- sound/soc/codecs/max9850.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/max9850.c b/sound/soc/codecs/max9850.c index 74d7f52c7e73..6e6134589588 100644 --- a/sound/soc/codecs/max9850.c +++ b/sound/soc/codecs/max9850.c @@ -52,9 +52,9 @@ static bool max9850_volatile_register(struct device *dev, unsigned int reg) switch (reg) { case MAX9850_STATUSA: case MAX9850_STATUSB: - return 1; + return true; default: - return 0; + return false; } } -- cgit v1.2.3 From 508e8641f89cc89554adbec3ce59bcd28a4ced4b Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Sat, 4 Aug 2018 16:49:55 -0500 Subject: ASoC: rt5631: use true and false for boolean values Return statements in functions returning bool should use true or false instead of an integer value. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva Signed-off-by: Mark Brown --- sound/soc/codecs/rt5631.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/soc/codecs/rt5631.c b/sound/soc/codecs/rt5631.c index e52e4670cf65..865f49ac38dd 100644 --- a/sound/soc/codecs/rt5631.c +++ b/sound/soc/codecs/rt5631.c @@ -105,9 +105,9 @@ static bool rt5631_volatile_register(struct device *dev, unsigned int reg) case RT5631_INDEX_ADD: case RT5631_INDEX_DATA: case RT5631_EQ_CTRL: - return 1; + return true; default: - return 0; + return false; } } @@ -164,9 +164,9 @@ static bool rt5631_readable_register(struct device *dev, unsigned int reg) case RT5631_VENDOR_ID: case RT5631_VENDOR_ID1: case RT5631_VENDOR_ID2: - return 1; + return true; default: - return 0; + return false; } } -- cgit v1.2.3 From 10754bfc051256ab922b818de3ddd11391862a5f Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Sat, 4 Aug 2018 16:50:27 -0500 Subject: ASoC: tda7419: use true and false for boolean values Return statements in functions returning bool should use true or false instead of an integer value. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva Signed-off-by: Mark Brown --- sound/soc/codecs/tda7419.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/tda7419.c b/sound/soc/codecs/tda7419.c index 225c210ac38f..7f3b79c5a563 100644 --- a/sound/soc/codecs/tda7419.c +++ b/sound/soc/codecs/tda7419.c @@ -142,9 +142,9 @@ struct tda7419_vol_control { static inline bool tda7419_vol_is_stereo(struct tda7419_vol_control *tvc) { if (tvc->reg == tvc->rreg) - return 0; + return false; - return 1; + return true; } static int tda7419_vol_info(struct snd_kcontrol *kcontrol, -- cgit v1.2.3 From 064ee5a370150534e12e5bac4ff81f86528e27ca Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Sat, 4 Aug 2018 16:51:01 -0500 Subject: ASoC: wm8990: use true and false for boolean values Return statements in functions returning bool should use true or false instead of an integer value. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva Acked-by: Charles Keepax Signed-off-by: Mark Brown --- sound/soc/codecs/wm8990.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/wm8990.c b/sound/soc/codecs/wm8990.c index 411b9eee88c2..457bc437ce54 100644 --- a/sound/soc/codecs/wm8990.c +++ b/sound/soc/codecs/wm8990.c @@ -40,9 +40,9 @@ static bool wm8990_volatile_register(struct device *dev, unsigned int reg) { switch (reg) { case WM8990_RESET: - return 1; + return true; default: - return 0; + return false; } } -- cgit v1.2.3 From c34c4515286f27e7e99d8a0011b4322d1de6c9bc Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Sat, 4 Aug 2018 16:52:01 -0500 Subject: ASoC: cs4270: use true and false for boolean values Return statements in functions returning bool should use true or false instead of an integer value. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva Signed-off-by: Mark Brown --- sound/soc/codecs/cs4270.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c index 2a7a4168c072..3c266eeb89bf 100644 --- a/sound/soc/codecs/cs4270.c +++ b/sound/soc/codecs/cs4270.c @@ -219,7 +219,7 @@ static bool cs4270_reg_is_volatile(struct device *dev, unsigned int reg) { /* Unreadable registers are considered volatile */ if ((reg < CS4270_FIRSTREG) || (reg > CS4270_LASTREG)) - return 1; + return true; return reg == CS4270_CHIPID; } -- cgit v1.2.3 From eb086306bc6b42dc2c538ec2350d44a82d1a835b Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Sat, 4 Aug 2018 16:52:35 -0500 Subject: ASoC: wm8996: use true and false for boolean values Return statements in functions returning bool should use true or false instead of an integer value. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva Acked-by: Charles Keepax Signed-off-by: Mark Brown --- sound/soc/codecs/wm8996.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/soc/codecs/wm8996.c b/sound/soc/codecs/wm8996.c index 78a408236cfb..91711f8958c5 100644 --- a/sound/soc/codecs/wm8996.c +++ b/sound/soc/codecs/wm8996.c @@ -1498,9 +1498,9 @@ static bool wm8996_readable_register(struct device *dev, unsigned int reg) case WM8996_RIGHT_PDM_SPEAKER: case WM8996_PDM_SPEAKER_MUTE_SEQUENCE: case WM8996_PDM_SPEAKER_VOLUME: - return 1; + return true; default: - return 0; + return false; } } @@ -1522,9 +1522,9 @@ static bool wm8996_volatile_register(struct device *dev, unsigned int reg) case WM8996_MIC_DETECT_3: case WM8996_HEADPHONE_DETECT_1: case WM8996_HEADPHONE_DETECT_2: - return 1; + return true; default: - return 0; + return false; } } -- cgit v1.2.3 From 965afd3c1dbaf293bfa9452aaf0a7e53d78d07f3 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Sat, 4 Aug 2018 16:53:10 -0500 Subject: ASoC: da7219: use true and false for boolean values Return statements in functions returning bool should use true or false instead of an integer value. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva Signed-off-by: Mark Brown --- sound/soc/codecs/da7219.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/da7219.c b/sound/soc/codecs/da7219.c index 980a6a8bf56d..c0144f2f8174 100644 --- a/sound/soc/codecs/da7219.c +++ b/sound/soc/codecs/da7219.c @@ -2143,9 +2143,9 @@ static bool da7219_volatile_register(struct device *dev, unsigned int reg) case DA7219_ACCDET_IRQ_EVENT_B: case DA7219_ACCDET_CONFIG_8: case DA7219_SYSTEM_STATUS: - return 1; + return true; default: - return 0; + return false; } } -- cgit v1.2.3 From bc94c8884e5a94914ec950dfc615563a1253e3f3 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Sat, 4 Aug 2018 16:53:38 -0500 Subject: ASoC: twl6040: use true and false for boolean values Return statements in functions returning bool should use true or false instead of an integer value. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva Signed-off-by: Mark Brown --- sound/soc/codecs/twl6040.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/twl6040.c b/sound/soc/codecs/twl6040.c index bfd1abd72253..94675da514c8 100644 --- a/sound/soc/codecs/twl6040.c +++ b/sound/soc/codecs/twl6040.c @@ -148,7 +148,7 @@ static bool twl6040_can_write_to_chip(struct snd_soc_component *component, case TWL6040_REG_HFRCTL: return priv->dl2_unmuted; default: - return 1; + return true; } } -- cgit v1.2.3 From 1752a35acd8e837463fb7b7d9492b18e2a2ed5e3 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Sat, 4 Aug 2018 16:54:10 -0500 Subject: ASoC: da7213: use true and false for boolean values Return statements in functions returning bool should use true or false instead of an integer value. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva Signed-off-by: Mark Brown --- sound/soc/codecs/da7213.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/da7213.c b/sound/soc/codecs/da7213.c index 54cb5f24969f..92d006a5283e 100644 --- a/sound/soc/codecs/da7213.c +++ b/sound/soc/codecs/da7213.c @@ -1140,9 +1140,9 @@ static bool da7213_volatile_register(struct device *dev, unsigned int reg) case DA7213_ALC_OFFSET_AUTO_M_R: case DA7213_ALC_OFFSET_AUTO_U_R: case DA7213_ALC_CIC_OP_LVL_DATA: - return 1; + return true; default: - return 0; + return false; } } -- cgit v1.2.3 From 380ae4ec420304aa59adb36776eaf78aef37192c Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Sat, 4 Aug 2018 16:54:54 -0500 Subject: ASoC: wm5100-tables: use true and false for boolean values Return statements in functions returning bool should use true or false instead of an integer value. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva Acked-by: Charles Keepax Signed-off-by: Mark Brown --- sound/soc/codecs/wm5100-tables.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/sound/soc/codecs/wm5100-tables.c b/sound/soc/codecs/wm5100-tables.c index e239f4bf2460..9e987cf07450 100644 --- a/sound/soc/codecs/wm5100-tables.c +++ b/sound/soc/codecs/wm5100-tables.c @@ -30,7 +30,7 @@ bool wm5100_volatile_register(struct device *dev, unsigned int reg) case WM5100_OUTPUT_STATUS_2: case WM5100_INPUT_ENABLES_STATUS: case WM5100_MIC_DETECT_3: - return 1; + return true; default: if ((reg >= WM5100_DSP1_PM_0 && reg <= WM5100_DSP1_PM_1535) || (reg >= WM5100_DSP1_ZM_0 && reg <= WM5100_DSP1_ZM_2047) || @@ -41,9 +41,9 @@ bool wm5100_volatile_register(struct device *dev, unsigned int reg) (reg >= WM5100_DSP3_PM_0 && reg <= WM5100_DSP3_PM_1535) || (reg >= WM5100_DSP3_ZM_0 && reg <= WM5100_DSP3_ZM_2047) || (reg >= WM5100_DSP3_DM_0 && reg <= WM5100_DSP3_DM_511)) - return 1; + return true; else - return 0; + return false; } } @@ -798,7 +798,7 @@ bool wm5100_readable_register(struct device *dev, unsigned int reg) case WM5100_DSP3_CONTROL_28: case WM5100_DSP3_CONTROL_29: case WM5100_DSP3_CONTROL_30: - return 1; + return true; default: if ((reg >= WM5100_DSP1_PM_0 && reg <= WM5100_DSP1_PM_1535) || (reg >= WM5100_DSP1_ZM_0 && reg <= WM5100_DSP1_ZM_2047) || @@ -809,9 +809,9 @@ bool wm5100_readable_register(struct device *dev, unsigned int reg) (reg >= WM5100_DSP3_PM_0 && reg <= WM5100_DSP3_PM_1535) || (reg >= WM5100_DSP3_ZM_0 && reg <= WM5100_DSP3_ZM_2047) || (reg >= WM5100_DSP3_DM_0 && reg <= WM5100_DSP3_DM_511)) - return 1; + return true; else - return 0; + return false; } } -- cgit v1.2.3 From e1ec62b147c2f2deae66e69ee4f7347dc80123ae Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Sat, 4 Aug 2018 16:55:28 -0500 Subject: ASoC: da9055: use true and false for boolean values Return statements in functions returning bool should use true or false instead of an integer value. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva Signed-off-by: Mark Brown --- sound/soc/codecs/da9055.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/da9055.c b/sound/soc/codecs/da9055.c index afdf90c78884..f6a7bf9560e7 100644 --- a/sound/soc/codecs/da9055.c +++ b/sound/soc/codecs/da9055.c @@ -1041,9 +1041,9 @@ static bool da9055_volatile_register(struct device *dev, case DA9055_HP_R_GAIN_STATUS: case DA9055_LINE_GAIN_STATUS: case DA9055_ALC_CIC_OP_LVL_DATA: - return 1; + return true; default: - return 0; + return false; } } -- cgit v1.2.3 From bee7d3c9f89a1bbe3d5f88ac9d6946de4705731b Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Sat, 4 Aug 2018 16:56:02 -0500 Subject: ASoC: wm8903: use true and false for boolean values Return statements in functions returning bool should use true or false instead of an integer value. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva Acked-by: Charles Keepax Signed-off-by: Mark Brown --- sound/soc/codecs/wm8903.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c index 7b8b6ef2f632..6cb3c153ba19 100644 --- a/sound/soc/codecs/wm8903.c +++ b/sound/soc/codecs/wm8903.c @@ -251,10 +251,10 @@ static bool wm8903_volatile_register(struct device *dev, unsigned int reg) case WM8903_DC_SERVO_READBACK_2: case WM8903_DC_SERVO_READBACK_3: case WM8903_DC_SERVO_READBACK_4: - return 1; + return true; default: - return 0; + return false; } } -- cgit v1.2.3 From 8e3684f66e15c354dba5544c2af8ce973ed40cf6 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Mon, 6 Aug 2018 11:12:05 +0100 Subject: ASoC: qcom: make common.c as proper module This patch converts common helper functions in to proper module and also fixes below warning. WARNING: sound/soc/qcom/snd-soc-sdm845: 'qcom_snd_parse_of' exported twice. Previous export was in sound/soc/qcom/snd-soc-apq8096.ko Signed-off-by: Srinivas Kandagatla Signed-off-by: Mark Brown --- sound/soc/qcom/Kconfig | 5 +++++ sound/soc/qcom/Makefile | 6 ++++-- 2 files changed, 9 insertions(+), 2 deletions(-) diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig index 5f03312ef007..2a4c912d1e48 100644 --- a/sound/soc/qcom/Kconfig +++ b/sound/soc/qcom/Kconfig @@ -41,6 +41,9 @@ config SND_SOC_APQ8016_SBC APQ8016 SOC-based systems. Say Y if you want to use audio devices on MI2S. +config SND_SOC_QCOM_COMMON + tristate + config SND_SOC_QDSP6_COMMON tristate @@ -86,6 +89,7 @@ config SND_SOC_MSM8996 tristate "SoC Machine driver for MSM8996 and APQ8096 boards" depends on QCOM_APR select SND_SOC_QDSP6 + select SND_SOC_QCOM_COMMON help Support for Qualcomm Technologies LPASS audio block in APQ8096 SoC-based systems. @@ -95,6 +99,7 @@ config SND_SOC_SDM845 tristate "SoC Machine driver for SDM845 boards" depends on QCOM_APR select SND_SOC_QDSP6 + select SND_SOC_QCOM_COMMON help To add support for audio on Qualcomm Technologies Inc. SDM845 SoC-based systems. diff --git a/sound/soc/qcom/Makefile b/sound/soc/qcom/Makefile index f0e94d48ba98..41b2c7a23a4d 100644 --- a/sound/soc/qcom/Makefile +++ b/sound/soc/qcom/Makefile @@ -13,13 +13,15 @@ obj-$(CONFIG_SND_SOC_LPASS_APQ8016) += snd-soc-lpass-apq8016.o # Machine snd-soc-storm-objs := storm.o snd-soc-apq8016-sbc-objs := apq8016_sbc.o -snd-soc-apq8096-objs := apq8096.o common.o -snd-soc-sdm845-objs := sdm845.o common.o +snd-soc-apq8096-objs := apq8096.o +snd-soc-sdm845-objs := sdm845.o +snd-soc-qcom-common-objs := common.o obj-$(CONFIG_SND_SOC_STORM) += snd-soc-storm.o obj-$(CONFIG_SND_SOC_APQ8016_SBC) += snd-soc-apq8016-sbc.o obj-$(CONFIG_SND_SOC_MSM8996) += snd-soc-apq8096.o obj-$(CONFIG_SND_SOC_SDM845) += snd-soc-sdm845.o +obj-$(CONFIG_SND_SOC_QCOM_COMMON) += snd-soc-qcom-common.o #DSP lib obj-$(CONFIG_SND_SOC_QDSP6) += qdsp6/ -- cgit v1.2.3 From e9d244b14dd5cf9a78ab256a4463d946e580ca63 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Mon, 6 Aug 2018 11:12:06 +0100 Subject: ASoC: apq8096: remove unused header files This patch removes unused header files from the driver. Signed-off-by: Srinivas Kandagatla Signed-off-by: Mark Brown --- sound/soc/qcom/apq8096.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/sound/soc/qcom/apq8096.c b/sound/soc/qcom/apq8096.c index 6ee7e66cbaaa..1543e85629f8 100644 --- a/sound/soc/qcom/apq8096.c +++ b/sound/soc/qcom/apq8096.c @@ -1,9 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 // Copyright (c) 2018, Linaro Limited -#include #include -#include #include #include #include -- cgit v1.2.3 From 846b2c96808cc7cdf4e0619d00604b3edd15b35a Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Mon, 6 Aug 2018 11:12:07 +0100 Subject: ASoC: sdm845: remove unused header files This patch removes unused header files from the driver. Signed-off-by: Srinivas Kandagatla Signed-off-by: Mark Brown --- sound/soc/qcom/sdm845.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/sound/soc/qcom/sdm845.c b/sound/soc/qcom/sdm845.c index c1adb77230eb..2a781d87ee65 100644 --- a/sound/soc/qcom/sdm845.c +++ b/sound/soc/qcom/sdm845.c @@ -5,11 +5,9 @@ #include #include -#include #include #include #include -#include #include "common.h" #include "qdsp6/q6afe.h" -- cgit v1.2.3 From d72117d0c89a3f5657ef91d5eef31337964e3cb2 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Mon, 6 Aug 2018 11:12:08 +0100 Subject: ASoC: qcom: remove unused header files from common.h This patch removes unused header files from common.h. Signed-off-by: Srinivas Kandagatla Signed-off-by: Mark Brown --- sound/soc/qcom/common.h | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/soc/qcom/common.h b/sound/soc/qcom/common.h index ad5d2cf27459..f05c05b12bd7 100644 --- a/sound/soc/qcom/common.h +++ b/sound/soc/qcom/common.h @@ -4,7 +4,6 @@ #ifndef __QCOM_SND_COMMON_H__ #define __QCOM_SND_COMMON_H__ -#include #include int qcom_snd_parse_of(struct snd_soc_card *card); -- cgit v1.2.3 From 0961503412e3e13d82f885f9fb3af527edd58e47 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Mon, 6 Aug 2018 11:12:09 +0100 Subject: ASoC: qdsp6: q6afe-dai: add SLIM tx AIF_IN dapm Add missing AIF_IN dapm for slim tx ports. Signed-off-by: Srinivas Kandagatla Signed-off-by: Mark Brown --- sound/soc/qcom/qdsp6/q6afe-dai.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/sound/soc/qcom/qdsp6/q6afe-dai.c b/sound/soc/qcom/qdsp6/q6afe-dai.c index e988692a3ced..139d24be3fb9 100644 --- a/sound/soc/qcom/qdsp6/q6afe-dai.c +++ b/sound/soc/qcom/qdsp6/q6afe-dai.c @@ -1117,6 +1117,13 @@ static const struct snd_soc_dapm_widget q6afe_dai_widgets[] = { SND_SOC_DAPM_AIF_OUT("SLIMBUS_4_RX", "Slimbus4 Playback", 0, 0, 0, 0), SND_SOC_DAPM_AIF_OUT("SLIMBUS_5_RX", "Slimbus5 Playback", 0, 0, 0, 0), SND_SOC_DAPM_AIF_OUT("SLIMBUS_6_RX", "Slimbus6 Playback", 0, 0, 0, 0), + SND_SOC_DAPM_AIF_IN("SLIMBUS_0_TX", "Slimbus Capture", 0, 0, 0, 0), + SND_SOC_DAPM_AIF_IN("SLIMBUS_1_TX", "Slimbus1 Capture", 0, 0, 0, 0), + SND_SOC_DAPM_AIF_IN("SLIMBUS_2_TX", "Slimbus2 Capture", 0, 0, 0, 0), + SND_SOC_DAPM_AIF_IN("SLIMBUS_3_TX", "Slimbus3 Capture", 0, 0, 0, 0), + SND_SOC_DAPM_AIF_IN("SLIMBUS_4_TX", "Slimbus4 Capture", 0, 0, 0, 0), + SND_SOC_DAPM_AIF_IN("SLIMBUS_5_TX", "Slimbus5 Capture", 0, 0, 0, 0), + SND_SOC_DAPM_AIF_IN("SLIMBUS_6_TX", "Slimbus6 Capture", 0, 0, 0, 0), SND_SOC_DAPM_AIF_OUT("QUAT_MI2S_RX", "Quaternary MI2S Playback", 0, 0, 0, 0), SND_SOC_DAPM_AIF_IN("QUAT_MI2S_TX", "Quaternary MI2S Capture", -- cgit v1.2.3 From ad0eaee6195db1db1749dd46b9e6f4466793d178 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Mon, 6 Aug 2018 07:14:51 -0500 Subject: ASoC: wm8994: Fix missing break in switch Add missing break statement in order to prevent the code from falling through to the default case. Addresses-Coverity-ID: 115050 ("Missing break in switch") Reported-by: Valdis Kletnieks Signed-off-by: Gustavo A. R. Silva Acked-by: Charles Keepax Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/wm8994.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 62f8c5b9ba92..14f1b0c0d286 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -2432,7 +2432,7 @@ static int wm8994_set_dai_sysclk(struct snd_soc_dai *dai, snd_soc_component_update_bits(component, WM8994_POWER_MANAGEMENT_2, WM8994_OPCLK_ENA, 0); } - /* fall through */ + break; default: return -EINVAL; -- cgit v1.2.3 From bbdb7012b0736cda0b9b00a2949e9207cf2f892f Mon Sep 17 00:00:00 2001 From: Akshu Agrawal Date: Mon, 6 Aug 2018 12:57:14 +0530 Subject: ASoC: AMD: Make ACP->SYSMEM DMA non circular In capture case we don't want ACP to SYSMEM dma to be circular. This is because if an in place DSP filter is applied to captured output then circular DMA can overwrite the filter value with stale data. Signed-off-by: Akshu Agrawal Signed-off-by: Mark Brown --- sound/soc/amd/acp-pcm-dma.c | 36 +++++++++++++++++++++++++++++++----- 1 file changed, 31 insertions(+), 5 deletions(-) diff --git a/sound/soc/amd/acp-pcm-dma.c b/sound/soc/amd/acp-pcm-dma.c index 94bcf69008df..816abd65a6ed 100644 --- a/sound/soc/amd/acp-pcm-dma.c +++ b/sound/soc/amd/acp-pcm-dma.c @@ -400,7 +400,7 @@ static void acp_dma_cap_channel_disable(void __iomem *acp_mmio, } /* Start a given DMA channel transfer */ -static void acp_dma_start(void __iomem *acp_mmio, u16 ch_num) +static void acp_dma_start(void __iomem *acp_mmio, u16 ch_num, bool is_circular) { u32 dma_ctrl; @@ -429,8 +429,11 @@ static void acp_dma_start(void __iomem *acp_mmio, u16 ch_num) break; } - /* circular for both DMA channel */ - dma_ctrl |= ACP_DMA_CNTL_0__Circular_DMA_En_MASK; + /* enable for ACP to SRAM DMA channel */ + if (is_circular == true) + dma_ctrl |= ACP_DMA_CNTL_0__Circular_DMA_En_MASK; + else + dma_ctrl &= ~ACP_DMA_CNTL_0__Circular_DMA_En_MASK; acp_reg_write(dma_ctrl, acp_mmio, mmACP_DMA_CNTL_0 + ch_num); } @@ -674,6 +677,7 @@ static int acp_deinit(void __iomem *acp_mmio) /* ACP DMA irq handler routine for playback, capture usecases */ static irqreturn_t dma_irq_handler(int irq, void *arg) { + u16 dscr_idx; u32 intr_flag, ext_intr_status; struct audio_drv_data *irq_data; void __iomem *acp_mmio; @@ -705,6 +709,15 @@ static irqreturn_t dma_irq_handler(int irq, void *arg) if ((intr_flag & BIT(I2S_TO_ACP_DMA_CH_NUM)) != 0) { valid_irq = true; + if (acp_reg_read(acp_mmio, mmACP_DMA_CUR_DSCR_14) == + CAPTURE_START_DMA_DESCR_CH15) + dscr_idx = CAPTURE_END_DMA_DESCR_CH14; + else + dscr_idx = CAPTURE_START_DMA_DESCR_CH14; + config_acp_dma_channel(acp_mmio, ACP_TO_SYSRAM_CH_NUM, dscr_idx, + 1, 0); + acp_dma_start(acp_mmio, ACP_TO_SYSRAM_CH_NUM, false); + snd_pcm_period_elapsed(irq_data->capture_i2ssp_stream); acp_reg_write((intr_flag & BIT(I2S_TO_ACP_DMA_CH_NUM)) << 16, acp_mmio, mmACP_EXTERNAL_INTR_STAT); @@ -712,6 +725,17 @@ static irqreturn_t dma_irq_handler(int irq, void *arg) if ((intr_flag & BIT(I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM)) != 0) { valid_irq = true; + if (acp_reg_read(acp_mmio, mmACP_DMA_CUR_DSCR_10) == + CAPTURE_START_DMA_DESCR_CH11) + dscr_idx = CAPTURE_END_DMA_DESCR_CH10; + else + dscr_idx = CAPTURE_START_DMA_DESCR_CH10; + config_acp_dma_channel(acp_mmio, + ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM, + dscr_idx, 1, 0); + acp_dma_start(acp_mmio, ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM, + false); + snd_pcm_period_elapsed(irq_data->capture_i2sbt_stream); acp_reg_write((intr_flag & BIT(I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM)) << 16, @@ -1053,9 +1077,11 @@ static int acp_dma_trigger(struct snd_pcm_substream *substream, int cmd) acp_dma_cap_channel_enable(rtd->acp_mmio, CAP_CHANNEL1); } + acp_dma_start(rtd->acp_mmio, rtd->ch1, true); + } else { + acp_dma_start(rtd->acp_mmio, rtd->ch1, true); + acp_dma_start(rtd->acp_mmio, rtd->ch2, true); } - acp_dma_start(rtd->acp_mmio, rtd->ch1); - acp_dma_start(rtd->acp_mmio, rtd->ch2); ret = 0; break; case SNDRV_PCM_TRIGGER_STOP: -- cgit v1.2.3 From 662fb3efe7ee835f0eeba6bc63b81e82a97fc312 Mon Sep 17 00:00:00 2001 From: "Mukunda, Vijendar" Date: Mon, 6 Aug 2018 12:57:15 +0530 Subject: ASoC: AMD: Modified DMA pointer for capture Give position on ACP->SYSMEM DMA channel for the number of bytes that have been transferred on the basis of current descriptor under service. Signed-off-by: Vijendar Mukunda Signed-off-by: Akshu Agrawal Signed-off-by: Mark Brown --- sound/soc/amd/acp-pcm-dma.c | 31 ++++++++++++++++++------------- sound/soc/amd/acp.h | 1 + 2 files changed, 19 insertions(+), 13 deletions(-) diff --git a/sound/soc/amd/acp-pcm-dma.c b/sound/soc/amd/acp-pcm-dma.c index 816abd65a6ed..32f27c5e4d93 100644 --- a/sound/soc/amd/acp-pcm-dma.c +++ b/sound/soc/amd/acp-pcm-dma.c @@ -922,10 +922,7 @@ static int acp_dma_hw_params(struct snd_pcm_substream *substream, rtd->destination = FROM_BLUETOOTH; rtd->dma_dscr_idx_1 = CAPTURE_START_DMA_DESCR_CH10; rtd->dma_dscr_idx_2 = CAPTURE_START_DMA_DESCR_CH11; - rtd->byte_cnt_high_reg_offset = - mmACP_I2S_BT_RECEIVE_BYTE_CNT_HIGH; - rtd->byte_cnt_low_reg_offset = - mmACP_I2S_BT_RECEIVE_BYTE_CNT_LOW; + rtd->dma_curr_dscr = mmACP_DMA_CUR_DSCR_11; adata->capture_i2sbt_stream = substream; break; case I2S_SP_INSTANCE: @@ -945,10 +942,7 @@ static int acp_dma_hw_params(struct snd_pcm_substream *substream, rtd->destination = FROM_ACP_I2S_1; rtd->dma_dscr_idx_1 = CAPTURE_START_DMA_DESCR_CH14; rtd->dma_dscr_idx_2 = CAPTURE_START_DMA_DESCR_CH15; - rtd->byte_cnt_high_reg_offset = - mmACP_I2S_RECEIVED_BYTE_CNT_HIGH; - rtd->byte_cnt_low_reg_offset = - mmACP_I2S_RECEIVED_BYTE_CNT_LOW; + rtd->dma_curr_dscr = mmACP_DMA_CUR_DSCR_15; adata->capture_i2ssp_stream = substream; } } @@ -1002,6 +996,8 @@ static snd_pcm_uframes_t acp_dma_pointer(struct snd_pcm_substream *substream) u32 buffersize; u32 pos = 0; u64 bytescount = 0; + u16 dscr; + u32 period_bytes; struct snd_pcm_runtime *runtime = substream->runtime; struct audio_substream_data *rtd = runtime->private_data; @@ -1009,11 +1005,20 @@ static snd_pcm_uframes_t acp_dma_pointer(struct snd_pcm_substream *substream) if (!rtd) return -EINVAL; - buffersize = frames_to_bytes(runtime, runtime->buffer_size); - bytescount = acp_get_byte_count(rtd); - - bytescount -= rtd->bytescount; - pos = do_div(bytescount, buffersize); + if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) { + period_bytes = frames_to_bytes(runtime, runtime->period_size); + dscr = acp_reg_read(rtd->acp_mmio, rtd->dma_curr_dscr); + if (dscr == rtd->dma_dscr_idx_1) + pos = period_bytes; + else + pos = 0; + } else { + buffersize = frames_to_bytes(runtime, runtime->buffer_size); + bytescount = acp_get_byte_count(rtd); + if (bytescount > rtd->bytescount) + bytescount -= rtd->bytescount; + pos = do_div(bytescount, buffersize); + } return bytes_to_frames(runtime, pos); } diff --git a/sound/soc/amd/acp.h b/sound/soc/amd/acp.h index 0a2240bff62e..be3963e8f4fa 100644 --- a/sound/soc/amd/acp.h +++ b/sound/soc/amd/acp.h @@ -138,6 +138,7 @@ struct audio_substream_data { u32 sram_bank; u32 byte_cnt_high_reg_offset; u32 byte_cnt_low_reg_offset; + u32 dma_curr_dscr; uint64_t size; u64 bytescount; void __iomem *acp_mmio; -- cgit v1.2.3 From c21c834adb5bc81e7081aa93ac50619c6d060506 Mon Sep 17 00:00:00 2001 From: Akshu Agrawal Date: Mon, 6 Aug 2018 12:57:16 +0530 Subject: ASoC: AMD: Set delay value for the capture case ACP->SYSMEM DMA happens at every I2S->SYSMEM period completion. Thus, there is delay of x frames till I2S->SYSMEM reaches a period length. This delay is communicated to user space. Signed-off-by: Akshu Agrawal Signed-off-by: Mark Brown --- sound/soc/amd/acp-pcm-dma.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/sound/soc/amd/acp-pcm-dma.c b/sound/soc/amd/acp-pcm-dma.c index 32f27c5e4d93..e359938e3d7e 100644 --- a/sound/soc/amd/acp-pcm-dma.c +++ b/sound/soc/amd/acp-pcm-dma.c @@ -922,6 +922,10 @@ static int acp_dma_hw_params(struct snd_pcm_substream *substream, rtd->destination = FROM_BLUETOOTH; rtd->dma_dscr_idx_1 = CAPTURE_START_DMA_DESCR_CH10; rtd->dma_dscr_idx_2 = CAPTURE_START_DMA_DESCR_CH11; + rtd->byte_cnt_high_reg_offset = + mmACP_I2S_BT_RECEIVE_BYTE_CNT_HIGH; + rtd->byte_cnt_low_reg_offset = + mmACP_I2S_BT_RECEIVE_BYTE_CNT_LOW; rtd->dma_curr_dscr = mmACP_DMA_CUR_DSCR_11; adata->capture_i2sbt_stream = substream; break; @@ -942,6 +946,10 @@ static int acp_dma_hw_params(struct snd_pcm_substream *substream, rtd->destination = FROM_ACP_I2S_1; rtd->dma_dscr_idx_1 = CAPTURE_START_DMA_DESCR_CH14; rtd->dma_dscr_idx_2 = CAPTURE_START_DMA_DESCR_CH15; + rtd->byte_cnt_high_reg_offset = + mmACP_I2S_RECEIVED_BYTE_CNT_HIGH; + rtd->byte_cnt_low_reg_offset = + mmACP_I2S_RECEIVED_BYTE_CNT_LOW; rtd->dma_curr_dscr = mmACP_DMA_CUR_DSCR_15; adata->capture_i2ssp_stream = substream; } @@ -997,7 +1005,7 @@ static snd_pcm_uframes_t acp_dma_pointer(struct snd_pcm_substream *substream) u32 pos = 0; u64 bytescount = 0; u16 dscr; - u32 period_bytes; + u32 period_bytes, delay; struct snd_pcm_runtime *runtime = substream->runtime; struct audio_substream_data *rtd = runtime->private_data; @@ -1012,6 +1020,11 @@ static snd_pcm_uframes_t acp_dma_pointer(struct snd_pcm_substream *substream) pos = period_bytes; else pos = 0; + bytescount = acp_get_byte_count(rtd); + if (bytescount > rtd->bytescount) + bytescount -= rtd->bytescount; + delay = do_div(bytescount, period_bytes); + runtime->delay = bytes_to_frames(runtime, delay); } else { buffersize = frames_to_bytes(runtime, runtime->buffer_size); bytescount = acp_get_byte_count(rtd); -- cgit v1.2.3 From 0b0722e191757ca6851382d78c15277ca9c5c211 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Fri, 3 Aug 2018 13:30:03 +0100 Subject: ASoC: compress: make BE and FE order inline with dpcm For some reason order of startup/hw_params/prepare are reversed in dynamic compress usecase when compared to dpcm usecase. This is a issue with platforms like QCOM where it expects the BE to be initialized before FE. Interestingly the compress trigger callback order is inline with dpcm. Am not 100% sure why the compress audio case has been reversed. This patch is making the order inline with dpcm. If the reverse ordering is just co-incendental then this change makes sense and will avoid inventing some new mechanism to cope with ordering. Signed-off-by: Srinivas Kandagatla Signed-off-by: Mark Brown --- sound/soc/soc-compress.c | 96 +++++++++++++++++++++++------------------------- 1 file changed, 46 insertions(+), 50 deletions(-) diff --git a/sound/soc/soc-compress.c b/sound/soc/soc-compress.c index b9e1673fea51..409d082e80d1 100644 --- a/sound/soc/soc-compress.c +++ b/sound/soc/soc-compress.c @@ -140,6 +140,30 @@ static int soc_compr_open_fe(struct snd_compr_stream *cstream) stream = SNDRV_PCM_STREAM_CAPTURE; mutex_lock_nested(&fe->card->mutex, SND_SOC_CARD_CLASS_RUNTIME); + fe->dpcm[stream].runtime = fe_substream->runtime; + + ret = dpcm_path_get(fe, stream, &list); + if (ret < 0) + goto be_err; + else if (ret == 0) + dev_dbg(fe->dev, "Compress ASoC: %s no valid %s route\n", + fe->dai_link->name, stream ? "capture" : "playback"); + /* calculate valid and active FE <-> BE dpcms */ + dpcm_process_paths(fe, stream, &list, 1); + fe->dpcm[stream].runtime = fe_substream->runtime; + + fe->dpcm[stream].runtime_update = SND_SOC_DPCM_UPDATE_FE; + + ret = dpcm_be_dai_startup(fe, stream); + if (ret < 0) { + /* clean up all links */ + list_for_each_entry(dpcm, &fe->dpcm[stream].be_clients, list_be) + dpcm->state = SND_SOC_DPCM_LINK_STATE_FREE; + + dpcm_be_disconnect(fe, stream); + fe->dpcm[stream].runtime = NULL; + goto out; + } if (cpu_dai->driver->cops && cpu_dai->driver->cops->startup) { ret = cpu_dai->driver->cops->startup(cstream, cpu_dai); @@ -153,7 +177,7 @@ static int soc_compr_open_fe(struct snd_compr_stream *cstream) ret = soc_compr_components_open(cstream, &component); if (ret < 0) - goto machine_err; + goto open_err; if (fe->dai_link->compr_ops && fe->dai_link->compr_ops->startup) { ret = fe->dai_link->compr_ops->startup(cstream); @@ -164,31 +188,6 @@ static int soc_compr_open_fe(struct snd_compr_stream *cstream) } } - fe->dpcm[stream].runtime = fe_substream->runtime; - - ret = dpcm_path_get(fe, stream, &list); - if (ret < 0) - goto fe_err; - else if (ret == 0) - dev_dbg(fe->dev, "Compress ASoC: %s no valid %s route\n", - fe->dai_link->name, stream ? "capture" : "playback"); - - /* calculate valid and active FE <-> BE dpcms */ - dpcm_process_paths(fe, stream, &list, 1); - - fe->dpcm[stream].runtime_update = SND_SOC_DPCM_UPDATE_FE; - - ret = dpcm_be_dai_startup(fe, stream); - if (ret < 0) { - /* clean up all links */ - list_for_each_entry(dpcm, &fe->dpcm[stream].be_clients, list_be) - dpcm->state = SND_SOC_DPCM_LINK_STATE_FREE; - - dpcm_be_disconnect(fe, stream); - fe->dpcm[stream].runtime = NULL; - goto path_err; - } - dpcm_clear_pending_state(fe, stream); dpcm_path_put(&list); @@ -201,17 +200,14 @@ static int soc_compr_open_fe(struct snd_compr_stream *cstream) return 0; -path_err: - dpcm_path_put(&list); -fe_err: - if (fe->dai_link->compr_ops && fe->dai_link->compr_ops->shutdown) - fe->dai_link->compr_ops->shutdown(cstream); machine_err: soc_compr_components_free(cstream, component); - +open_err: if (cpu_dai->driver->cops && cpu_dai->driver->cops->shutdown) cpu_dai->driver->cops->shutdown(cstream, cpu_dai); out: + dpcm_path_put(&list); +be_err: fe->dpcm[stream].runtime_update = SND_SOC_DPCM_UPDATE_NO; mutex_unlock(&fe->card->mutex); return ret; @@ -551,6 +547,24 @@ static int soc_compr_set_params_fe(struct snd_compr_stream *cstream, mutex_lock_nested(&fe->card->mutex, SND_SOC_CARD_CLASS_RUNTIME); + /* + * Create an empty hw_params for the BE as the machine driver must + * fix this up to match DSP decoder and ASRC configuration. + * I.e. machine driver fixup for compressed BE is mandatory. + */ + memset(&fe->dpcm[fe_substream->stream].hw_params, 0, + sizeof(struct snd_pcm_hw_params)); + + fe->dpcm[stream].runtime_update = SND_SOC_DPCM_UPDATE_FE; + + ret = dpcm_be_dai_hw_params(fe, stream); + if (ret < 0) + goto out; + + ret = dpcm_be_dai_prepare(fe, stream); + if (ret < 0) + goto out; + if (cpu_dai->driver->cops && cpu_dai->driver->cops->set_params) { ret = cpu_dai->driver->cops->set_params(cstream, params, cpu_dai); if (ret < 0) @@ -577,24 +591,6 @@ static int soc_compr_set_params_fe(struct snd_compr_stream *cstream, goto out; } - /* - * Create an empty hw_params for the BE as the machine driver must - * fix this up to match DSP decoder and ASRC configuration. - * I.e. machine driver fixup for compressed BE is mandatory. - */ - memset(&fe->dpcm[fe_substream->stream].hw_params, 0, - sizeof(struct snd_pcm_hw_params)); - - fe->dpcm[stream].runtime_update = SND_SOC_DPCM_UPDATE_FE; - - ret = dpcm_be_dai_hw_params(fe, stream); - if (ret < 0) - goto out; - - ret = dpcm_be_dai_prepare(fe, stream); - if (ret < 0) - goto out; - dpcm_dapm_stream_event(fe, stream, SND_SOC_DAPM_STREAM_START); fe->dpcm[stream].state = SND_SOC_DPCM_STATE_PREPARE; -- cgit v1.2.3 From f861e3e28a3016a2064d9f600eaa92a530b732b4 Mon Sep 17 00:00:00 2001 From: Matthias Kaehlcke Date: Tue, 7 Aug 2018 10:19:40 -0700 Subject: ASoC: rt5677: Fix initialization of rt5677_of_match.data The driver expects to find the device id in rt5677_of_match.data, however it is currently assigned to rt5677_of_match.type. Fix this. The problem was found with the help of clang: sound/soc/codecs/rt5677.c:5010:36: warning: expression which evaluates to zero treated as a null pointer constant of type 'const void *' [-Wnon-literal-null-conversion] { .compatible = "realtek,rt5677", RT5677 }, ^~~~~~ Fixes: ddc9e69b9dc2 ("ASoC: rt5677: Hide platform data in the module sources") Signed-off-by: Matthias Kaehlcke Reviewed-by: Guenter Roeck Acked-by: Andy Shevchenko Signed-off-by: Mark Brown --- sound/soc/codecs/rt5677.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/rt5677.c b/sound/soc/codecs/rt5677.c index 922becfee59b..9b7a1833d331 100644 --- a/sound/soc/codecs/rt5677.c +++ b/sound/soc/codecs/rt5677.c @@ -5008,7 +5008,7 @@ static const struct regmap_config rt5677_regmap = { }; static const struct of_device_id rt5677_of_match[] = { - { .compatible = "realtek,rt5677", RT5677 }, + { .compatible = "realtek,rt5677", .data = (const void *)RT5677 }, { } }; MODULE_DEVICE_TABLE(of, rt5677_of_match); -- cgit v1.2.3 From b1470d4ce77c2d60661c7d5325d4fb8063e15ff8 Mon Sep 17 00:00:00 2001 From: Ajit Pandey Date: Tue, 7 Aug 2018 18:30:42 +0100 Subject: ASoC: wm_adsp: Correct DSP pointer for preloader control The offset of the DSP core needs to be taken into account for the DSP preloader control get and put. Currently the dsp->preloaded variable will only ever be read/updated on the first DSP, whilst this doesn't affect the operation of the control the readback will be incorrect. Signed-off-by: Ajit Pandey Signed-off-by: Charles Keepax Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/wm_adsp.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/wm_adsp.c b/sound/soc/codecs/wm_adsp.c index 4e7f8525449e..08dc82770273 100644 --- a/sound/soc/codecs/wm_adsp.c +++ b/sound/soc/codecs/wm_adsp.c @@ -2643,7 +2643,10 @@ int wm_adsp2_preloader_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); - struct wm_adsp *dsp = snd_soc_component_get_drvdata(component); + struct wm_adsp *dsps = snd_soc_component_get_drvdata(component); + struct soc_mixer_control *mc = + (struct soc_mixer_control *)kcontrol->private_value; + struct wm_adsp *dsp = &dsps[mc->shift - 1]; ucontrol->value.integer.value[0] = dsp->preloaded; @@ -2655,10 +2658,11 @@ int wm_adsp2_preloader_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); - struct wm_adsp *dsp = snd_soc_component_get_drvdata(component); + struct wm_adsp *dsps = snd_soc_component_get_drvdata(component); struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component); struct soc_mixer_control *mc = (struct soc_mixer_control *)kcontrol->private_value; + struct wm_adsp *dsp = &dsps[mc->shift - 1]; char preload[32]; snprintf(preload, ARRAY_SIZE(preload), "DSP%u Preload", mc->shift); -- cgit v1.2.3 From 0717edbdfed61b4c1e8291140f78882d3a481042 Mon Sep 17 00:00:00 2001 From: Ryan Lee Date: Tue, 7 Aug 2018 20:06:38 -0700 Subject: ASoC: max98373: Added software reset register to readable registers Signed-off-by: Ryan Lee Signed-off-by: Mark Brown --- sound/soc/codecs/max98373.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/codecs/max98373.c b/sound/soc/codecs/max98373.c index a92586106932..92b7125ea169 100644 --- a/sound/soc/codecs/max98373.c +++ b/sound/soc/codecs/max98373.c @@ -488,6 +488,7 @@ static const DECLARE_TLV_DB_RANGE(max98373_bde_gain_tlv, static bool max98373_readable_register(struct device *dev, unsigned int reg) { switch (reg) { + case MAX98373_R2000_SW_RESET: case MAX98373_R2001_INT_RAW1 ... MAX98373_R200C_INT_EN3: case MAX98373_R2010_IRQ_CTRL: case MAX98373_R2014_THERM_WARN_THRESH -- cgit v1.2.3 From 0a047f07525fecfa8f6fccc5d30afff7e816de8d Mon Sep 17 00:00:00 2001 From: Richard Fitzgerald Date: Wed, 8 Aug 2018 17:13:38 +0100 Subject: ASoC: wm_adsp: Declare firmware controls from codec driver To allow for more flexibility in naming of DSP-type cores move the creation of the firmware controls to the codec drivers instead of having a hardcoded list in wm_adsp. Signed-off-by: Richard Fitzgerald Signed-off-by: Mark Brown --- sound/soc/codecs/cs47l24.c | 3 +++ sound/soc/codecs/wm2200.c | 10 ++++------ sound/soc/codecs/wm5102.c | 2 ++ sound/soc/codecs/wm5110.c | 5 +++++ sound/soc/codecs/wm_adsp.c | 35 +++++++++-------------------------- sound/soc/codecs/wm_adsp.h | 10 +++++++++- 6 files changed, 32 insertions(+), 33 deletions(-) diff --git a/sound/soc/codecs/cs47l24.c b/sound/soc/codecs/cs47l24.c index 0da52ead91e0..45e50fe3bf25 100644 --- a/sound/soc/codecs/cs47l24.c +++ b/sound/soc/codecs/cs47l24.c @@ -235,6 +235,9 @@ ARIZONA_MIXER_CONTROLS("AIF2TX6", ARIZONA_AIF2TX6MIX_INPUT_1_SOURCE), ARIZONA_MIXER_CONTROLS("AIF3TX1", ARIZONA_AIF3TX1MIX_INPUT_1_SOURCE), ARIZONA_MIXER_CONTROLS("AIF3TX2", ARIZONA_AIF3TX2MIX_INPUT_1_SOURCE), + +WM_ADSP_FW_CONTROL("DSP2", 1), +WM_ADSP_FW_CONTROL("DSP3", 2), }; ARIZONA_MIXER_ENUMS(EQ1, ARIZONA_EQ1MIX_INPUT_1_SOURCE); diff --git a/sound/soc/codecs/wm2200.c b/sound/soc/codecs/wm2200.c index 3663b9fd4d65..deff65161504 100644 --- a/sound/soc/codecs/wm2200.c +++ b/sound/soc/codecs/wm2200.c @@ -1180,6 +1180,9 @@ SOC_DOUBLE_R_TLV("OUT2 Digital Volume", WM2200_DAC_DIGITAL_VOLUME_2L, SOC_DOUBLE("OUT2 Switch", WM2200_PDM_1, WM2200_SPK1L_MUTE_SHIFT, WM2200_SPK1R_MUTE_SHIFT, 1, 1), SOC_ENUM("RxANC Src", wm2200_rxanc_input_sel), + +WM_ADSP_FW_CONTROL("DSP1", 0), +WM_ADSP_FW_CONTROL("DSP2", 1), }; WM2200_MIXER_ENUMS(OUT1L, WM2200_OUT1LMIX_INPUT_1_SOURCE); @@ -1553,15 +1556,10 @@ static const struct snd_soc_dapm_route wm2200_dapm_routes[] = { static int wm2200_probe(struct snd_soc_component *component) { struct wm2200_priv *wm2200 = snd_soc_component_get_drvdata(component); - int ret; wm2200->component = component; - ret = snd_soc_add_component_controls(component, wm_adsp_fw_controls, 2); - if (ret != 0) - return ret; - - return ret; + return 0; } static int wm2200_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) diff --git a/sound/soc/codecs/wm5102.c b/sound/soc/codecs/wm5102.c index a01a0c0e01eb..7e817e1877c2 100644 --- a/sound/soc/codecs/wm5102.c +++ b/sound/soc/codecs/wm5102.c @@ -985,6 +985,8 @@ ARIZONA_MIXER_CONTROLS("SLIMTX5", ARIZONA_SLIMTX5MIX_INPUT_1_SOURCE), ARIZONA_MIXER_CONTROLS("SLIMTX6", ARIZONA_SLIMTX6MIX_INPUT_1_SOURCE), ARIZONA_MIXER_CONTROLS("SLIMTX7", ARIZONA_SLIMTX7MIX_INPUT_1_SOURCE), ARIZONA_MIXER_CONTROLS("SLIMTX8", ARIZONA_SLIMTX8MIX_INPUT_1_SOURCE), + +WM_ADSP_FW_CONTROL("DSP1", 0), }; ARIZONA_MIXER_ENUMS(EQ1, ARIZONA_EQ1MIX_INPUT_1_SOURCE); diff --git a/sound/soc/codecs/wm5110.c b/sound/soc/codecs/wm5110.c index 00c735c585d9..b0789a03d699 100644 --- a/sound/soc/codecs/wm5110.c +++ b/sound/soc/codecs/wm5110.c @@ -927,6 +927,11 @@ ARIZONA_MIXER_CONTROLS("SLIMTX5", ARIZONA_SLIMTX5MIX_INPUT_1_SOURCE), ARIZONA_MIXER_CONTROLS("SLIMTX6", ARIZONA_SLIMTX6MIX_INPUT_1_SOURCE), ARIZONA_MIXER_CONTROLS("SLIMTX7", ARIZONA_SLIMTX7MIX_INPUT_1_SOURCE), ARIZONA_MIXER_CONTROLS("SLIMTX8", ARIZONA_SLIMTX8MIX_INPUT_1_SOURCE), + +WM_ADSP_FW_CONTROL("DSP1", 0), +WM_ADSP_FW_CONTROL("DSP2", 1), +WM_ADSP_FW_CONTROL("DSP3", 2), +WM_ADSP_FW_CONTROL("DSP4", 3), }; ARIZONA_MIXER_ENUMS(EQ1, ARIZONA_EQ1MIX_INPUT_1_SOURCE); diff --git a/sound/soc/codecs/wm_adsp.c b/sound/soc/codecs/wm_adsp.c index e39b0e0b04df..fbd0515c49d7 100644 --- a/sound/soc/codecs/wm_adsp.c +++ b/sound/soc/codecs/wm_adsp.c @@ -684,8 +684,8 @@ static inline void wm_adsp_debugfs_clear(struct wm_adsp *dsp) } #endif -static int wm_adsp_fw_get(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) +int wm_adsp_fw_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) { struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); struct soc_enum *e = (struct soc_enum *)kcontrol->private_value; @@ -695,9 +695,10 @@ static int wm_adsp_fw_get(struct snd_kcontrol *kcontrol, return 0; } +EXPORT_SYMBOL_GPL(wm_adsp_fw_get); -static int wm_adsp_fw_put(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) +int wm_adsp_fw_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) { struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol); struct soc_enum *e = (struct soc_enum *)kcontrol->private_value; @@ -721,8 +722,9 @@ static int wm_adsp_fw_put(struct snd_kcontrol *kcontrol, return ret; } +EXPORT_SYMBOL_GPL(wm_adsp_fw_put); -static const struct soc_enum wm_adsp_fw_enum[] = { +const struct soc_enum wm_adsp_fw_enum[] = { SOC_ENUM_SINGLE(0, 0, ARRAY_SIZE(wm_adsp_fw_text), wm_adsp_fw_text), SOC_ENUM_SINGLE(0, 1, ARRAY_SIZE(wm_adsp_fw_text), wm_adsp_fw_text), SOC_ENUM_SINGLE(0, 2, ARRAY_SIZE(wm_adsp_fw_text), wm_adsp_fw_text), @@ -731,24 +733,7 @@ static const struct soc_enum wm_adsp_fw_enum[] = { SOC_ENUM_SINGLE(0, 5, ARRAY_SIZE(wm_adsp_fw_text), wm_adsp_fw_text), SOC_ENUM_SINGLE(0, 6, ARRAY_SIZE(wm_adsp_fw_text), wm_adsp_fw_text), }; - -const struct snd_kcontrol_new wm_adsp_fw_controls[] = { - SOC_ENUM_EXT("DSP1 Firmware", wm_adsp_fw_enum[0], - wm_adsp_fw_get, wm_adsp_fw_put), - SOC_ENUM_EXT("DSP2 Firmware", wm_adsp_fw_enum[1], - wm_adsp_fw_get, wm_adsp_fw_put), - SOC_ENUM_EXT("DSP3 Firmware", wm_adsp_fw_enum[2], - wm_adsp_fw_get, wm_adsp_fw_put), - SOC_ENUM_EXT("DSP4 Firmware", wm_adsp_fw_enum[3], - wm_adsp_fw_get, wm_adsp_fw_put), - SOC_ENUM_EXT("DSP5 Firmware", wm_adsp_fw_enum[4], - wm_adsp_fw_get, wm_adsp_fw_put), - SOC_ENUM_EXT("DSP6 Firmware", wm_adsp_fw_enum[5], - wm_adsp_fw_get, wm_adsp_fw_put), - SOC_ENUM_EXT("DSP7 Firmware", wm_adsp_fw_enum[6], - wm_adsp_fw_get, wm_adsp_fw_put), -}; -EXPORT_SYMBOL_GPL(wm_adsp_fw_controls); +EXPORT_SYMBOL_GPL(wm_adsp_fw_enum); static struct wm_adsp_region const *wm_adsp_find_region(struct wm_adsp *dsp, int type) @@ -2884,9 +2869,7 @@ int wm_adsp2_component_probe(struct wm_adsp *dsp, struct snd_soc_component *comp dsp->component = component; - return snd_soc_add_component_controls(component, - &wm_adsp_fw_controls[dsp->num - 1], - 1); + return 0; } EXPORT_SYMBOL_GPL(wm_adsp2_component_probe); diff --git a/sound/soc/codecs/wm_adsp.h b/sound/soc/codecs/wm_adsp.h index bc6d359f0533..8d58cb9d9bb9 100644 --- a/sound/soc/codecs/wm_adsp.h +++ b/sound/soc/codecs/wm_adsp.h @@ -121,7 +121,11 @@ struct wm_adsp { .reg = SND_SOC_NOPM, .shift = num, .event = wm_adsp2_event, \ .event_flags = SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD } -extern const struct snd_kcontrol_new wm_adsp_fw_controls[]; +#define WM_ADSP_FW_CONTROL(dspname, num) \ + SOC_ENUM_EXT(dspname " Firmware", wm_adsp_fw_enum[num], \ + wm_adsp_fw_get, wm_adsp_fw_put) + +extern const struct soc_enum wm_adsp_fw_enum[]; int wm_adsp1_init(struct wm_adsp *dsp); int wm_adsp2_init(struct wm_adsp *dsp); @@ -144,6 +148,10 @@ int wm_adsp2_preloader_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol); int wm_adsp2_preloader_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol); +int wm_adsp_fw_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol); +int wm_adsp_fw_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol); int wm_adsp_compr_open(struct wm_adsp *dsp, struct snd_compr_stream *stream); int wm_adsp_compr_free(struct snd_compr_stream *stream); -- cgit v1.2.3 From 605391d0f4bfdff2f2c6c5477ce0ccf776d8d5c0 Mon Sep 17 00:00:00 2001 From: Richard Fitzgerald Date: Wed, 8 Aug 2018 17:13:39 +0100 Subject: ASoC: wm_adsp: Make DSP name configurable by codec driver Instead of harcoding that a core must always be called "DSPn" add a name member to struct wm_adsp so that the owning codec driver can provide a custom name. This allows for re-use of the wm_adsp driver with parts where the processing cores are named differently. If no name is provided the default DSPn name is used. Signed-off-by: Richard Fitzgerald Signed-off-by: Mark Brown --- sound/soc/codecs/wm_adsp.c | 69 ++++++++++++++++++++++++++++++++-------------- sound/soc/codecs/wm_adsp.h | 2 ++ 2 files changed, 50 insertions(+), 21 deletions(-) diff --git a/sound/soc/codecs/wm_adsp.c b/sound/soc/codecs/wm_adsp.c index 1c12c78dbcce..f61656070225 100644 --- a/sound/soc/codecs/wm_adsp.c +++ b/sound/soc/codecs/wm_adsp.c @@ -10,6 +10,7 @@ * published by the Free Software Foundation. */ +#include #include #include #include @@ -35,15 +36,15 @@ #include "wm_adsp.h" #define adsp_crit(_dsp, fmt, ...) \ - dev_crit(_dsp->dev, "DSP%d: " fmt, _dsp->num, ##__VA_ARGS__) + dev_crit(_dsp->dev, "%s: " fmt, _dsp->name, ##__VA_ARGS__) #define adsp_err(_dsp, fmt, ...) \ - dev_err(_dsp->dev, "DSP%d: " fmt, _dsp->num, ##__VA_ARGS__) + dev_err(_dsp->dev, "%s: " fmt, _dsp->name, ##__VA_ARGS__) #define adsp_warn(_dsp, fmt, ...) \ - dev_warn(_dsp->dev, "DSP%d: " fmt, _dsp->num, ##__VA_ARGS__) + dev_warn(_dsp->dev, "%s: " fmt, _dsp->name, ##__VA_ARGS__) #define adsp_info(_dsp, fmt, ...) \ - dev_info(_dsp->dev, "DSP%d: " fmt, _dsp->num, ##__VA_ARGS__) + dev_info(_dsp->dev, "%s: " fmt, _dsp->name, ##__VA_ARGS__) #define adsp_dbg(_dsp, fmt, ...) \ - dev_dbg(_dsp->dev, "DSP%d: " fmt, _dsp->num, ##__VA_ARGS__) + dev_dbg(_dsp->dev, "%s: " fmt, _dsp->name, ##__VA_ARGS__) #define ADSP1_CONTROL_1 0x00 #define ADSP1_CONTROL_2 0x02 @@ -608,7 +609,6 @@ static void wm_adsp2_init_debugfs(struct wm_adsp *dsp, struct snd_soc_component *component) { struct dentry *root = NULL; - char *root_name; int i; if (!component->debugfs_root) { @@ -616,13 +616,7 @@ static void wm_adsp2_init_debugfs(struct wm_adsp *dsp, goto err; } - root_name = kmalloc(PAGE_SIZE, GFP_KERNEL); - if (!root_name) - goto err; - - snprintf(root_name, PAGE_SIZE, "dsp%d", dsp->num); - root = debugfs_create_dir(root_name, component->debugfs_root); - kfree(root_name); + root = debugfs_create_dir(dsp->name, component->debugfs_root); if (!root) goto err; @@ -1315,12 +1309,12 @@ static int wm_adsp_create_control(struct wm_adsp *dsp, switch (dsp->fw_ver) { case 0: case 1: - snprintf(name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, "DSP%d %s %x", - dsp->num, region_name, alg_region->alg); + snprintf(name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, "%s %s %x", + dsp->name, region_name, alg_region->alg); break; default: ret = snprintf(name, SNDRV_CTL_ELEM_ID_NAME_MAXLEN, - "DSP%d%c %.12s %x", dsp->num, *region_name, + "%s%c %.12s %x", dsp->name, *region_name, wm_adsp_fw_text[dsp->fw], alg_region->alg); /* Truncate the subname from the start if it is too long */ @@ -1648,7 +1642,7 @@ static int wm_adsp_load(struct wm_adsp *dsp) if (file == NULL) return -ENOMEM; - snprintf(file, PAGE_SIZE, "%s-dsp%d-%s.wmfw", dsp->part, dsp->num, + snprintf(file, PAGE_SIZE, "%s-%s-%s.wmfw", dsp->part, dsp->fwf_name, wm_adsp_fw[dsp->fw].file); file[PAGE_SIZE - 1] = '\0'; @@ -2226,7 +2220,7 @@ static int wm_adsp_load_coeff(struct wm_adsp *dsp) if (file == NULL) return -ENOMEM; - snprintf(file, PAGE_SIZE, "%s-dsp%d-%s.bin", dsp->part, dsp->num, + snprintf(file, PAGE_SIZE, "%s-%s-%s.bin", dsp->part, dsp->fwf_name, wm_adsp_fw[dsp->fw].file); file[PAGE_SIZE - 1] = '\0'; @@ -2398,8 +2392,38 @@ out: return ret; } +static int wm_adsp_create_name(struct wm_adsp *dsp) +{ + char *p; + + if (!dsp->name) { + dsp->name = devm_kasprintf(dsp->dev, GFP_KERNEL, "DSP%d", + dsp->num); + if (!dsp->name) + return -ENOMEM; + } + + if (!dsp->fwf_name) { + p = devm_kstrdup(dsp->dev, dsp->name, GFP_KERNEL); + if (!p) + return -ENOMEM; + + dsp->fwf_name = p; + for (; *p != 0; ++p) + *p = tolower(*p); + } + + return 0; +} + int wm_adsp1_init(struct wm_adsp *dsp) { + int ret; + + ret = wm_adsp_create_name(dsp); + if (ret) + return ret; + INIT_LIST_HEAD(&dsp->alg_regions); mutex_init(&dsp->pwr_lock); @@ -2672,7 +2696,7 @@ int wm_adsp2_preloader_put(struct snd_kcontrol *kcontrol, struct wm_adsp *dsp = &dsps[mc->shift - 1]; char preload[32]; - snprintf(preload, ARRAY_SIZE(preload), "DSP%u Preload", mc->shift); + snprintf(preload, ARRAY_SIZE(preload), "%s Preload", dsp->name); dsp->preloaded = ucontrol->value.integer.value[0]; @@ -2867,8 +2891,7 @@ int wm_adsp2_component_probe(struct wm_adsp *dsp, struct snd_soc_component *comp { char preload[32]; - snprintf(preload, ARRAY_SIZE(preload), "DSP%d Preload", dsp->num); - + snprintf(preload, ARRAY_SIZE(preload), "%s Preload", dsp->name); snd_soc_component_disable_pin(component, preload); wm_adsp2_init_debugfs(dsp, component); @@ -2891,6 +2914,10 @@ int wm_adsp2_init(struct wm_adsp *dsp) { int ret; + ret = wm_adsp_create_name(dsp); + if (ret) + return ret; + switch (dsp->rev) { case 0: /* diff --git a/sound/soc/codecs/wm_adsp.h b/sound/soc/codecs/wm_adsp.h index 8d58cb9d9bb9..4b8778b0b06c 100644 --- a/sound/soc/codecs/wm_adsp.h +++ b/sound/soc/codecs/wm_adsp.h @@ -57,6 +57,8 @@ struct wm_adsp_compr_buf; struct wm_adsp { const char *part; + const char *name; + const char *fwf_name; int rev; int num; int type; -- cgit v1.2.3 From 17c81d2f5a59929c73a2a19fd49fe0b068fda76f Mon Sep 17 00:00:00 2001 From: Adam Thomson Date: Thu, 9 Aug 2018 10:48:50 +0100 Subject: ASoC: da7219: Add delays to capture path to remove DC offset noise On some platforms it has been noted that a pop noise can be witnessed when capturing audio, mainly for first time after a headset jack has been inserted. This is due to a DC offset in the Mic PGA and so to avoid this delays are required when powering up the capture path. This commit rectifies the problem by adding delays post Mic PGA and post Mixin PGA. The post Mic PGA delay is determined based on Mic Bias voltage, and is only applied the first time after a headset jack is inserted. Signed-off-by: Adam Thomson Signed-off-by: Mark Brown --- sound/soc/codecs/da7219-aad.c | 5 +++++ sound/soc/codecs/da7219.c | 44 +++++++++++++++++++++++++++++++++++++------ sound/soc/codecs/da7219.h | 8 ++++++-- 3 files changed, 49 insertions(+), 8 deletions(-) diff --git a/sound/soc/codecs/da7219-aad.c b/sound/soc/codecs/da7219-aad.c index a49ab751a036..2c7d5088e6f2 100644 --- a/sound/soc/codecs/da7219-aad.c +++ b/sound/soc/codecs/da7219-aad.c @@ -59,6 +59,7 @@ static void da7219_aad_btn_det_work(struct work_struct *work) container_of(work, struct da7219_aad_priv, btn_det_work); struct snd_soc_component *component = da7219_aad->component; struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component); + struct da7219_priv *da7219 = snd_soc_component_get_drvdata(component); u8 statusa, micbias_ctrl; bool micbias_up = false; int retries = 0; @@ -86,6 +87,8 @@ static void da7219_aad_btn_det_work(struct work_struct *work) if (retries >= DA7219_AAD_MICBIAS_CHK_RETRIES) dev_warn(component->dev, "Mic bias status check timed out"); + da7219->micbias_on_event = true; + /* * Mic bias pulse required to enable mic, must be done before enabling * button detection to prevent erroneous button readings. @@ -439,6 +442,8 @@ static irqreturn_t da7219_aad_irq_thread(int irq, void *data) snd_soc_component_update_bits(component, DA7219_ACCDET_CONFIG_1, DA7219_BUTTON_CONFIG_MASK, 0); + da7219->micbias_on_event = false; + /* Disable mic bias */ snd_soc_dapm_disable_pin(dapm, "Mic Bias"); snd_soc_dapm_sync(dapm); diff --git a/sound/soc/codecs/da7219.c b/sound/soc/codecs/da7219.c index c0144f2f8174..e46e9f4bc994 100644 --- a/sound/soc/codecs/da7219.c +++ b/sound/soc/codecs/da7219.c @@ -768,6 +768,30 @@ static const struct snd_kcontrol_new da7219_st_out_filtr_mix_controls[] = { * DAPM Events */ +static int da7219_mic_pga_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); + struct da7219_priv *da7219 = snd_soc_component_get_drvdata(component); + + switch (event) { + case SND_SOC_DAPM_POST_PMU: + if (da7219->micbias_on_event) { + /* + * Delay only for first capture after bias enabled to + * avoid possible DC offset related noise. + */ + da7219->micbias_on_event = false; + msleep(da7219->mic_pga_delay); + } + break; + default: + break; + } + + return 0; +} + static int da7219_dai_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { @@ -937,12 +961,12 @@ static const struct snd_soc_dapm_widget da7219_dapm_widgets[] = { SND_SOC_DAPM_INPUT("MIC"), /* Input PGAs */ - SND_SOC_DAPM_PGA("Mic PGA", DA7219_MIC_1_CTRL, - DA7219_MIC_1_AMP_EN_SHIFT, DA7219_NO_INVERT, - NULL, 0), - SND_SOC_DAPM_PGA("Mixin PGA", DA7219_MIXIN_L_CTRL, - DA7219_MIXIN_L_AMP_EN_SHIFT, DA7219_NO_INVERT, - NULL, 0), + SND_SOC_DAPM_PGA_E("Mic PGA", DA7219_MIC_1_CTRL, + DA7219_MIC_1_AMP_EN_SHIFT, DA7219_NO_INVERT, + NULL, 0, da7219_mic_pga_event, SND_SOC_DAPM_POST_PMU), + SND_SOC_DAPM_PGA_E("Mixin PGA", DA7219_MIXIN_L_CTRL, + DA7219_MIXIN_L_AMP_EN_SHIFT, DA7219_NO_INVERT, + NULL, 0, da7219_settling_event, SND_SOC_DAPM_POST_PMU), /* Input Filters */ SND_SOC_DAPM_ADC("ADC", NULL, DA7219_ADC_L_CTRL, DA7219_ADC_L_EN_SHIFT, @@ -1847,6 +1871,14 @@ static void da7219_handle_pdata(struct snd_soc_component *component) snd_soc_component_write(component, DA7219_MICBIAS_CTRL, micbias_lvl); + /* + * Calculate delay required to compensate for DC offset in + * Mic PGA, based on Mic Bias voltage. + */ + da7219->mic_pga_delay = DA7219_MIC_PGA_BASE_DELAY + + (pdata->micbias_lvl * + DA7219_MIC_PGA_OFFSET_DELAY); + /* Mic */ switch (pdata->mic_amp_in_sel) { case DA7219_MIC_AMP_IN_SEL_DIFF: diff --git a/sound/soc/codecs/da7219.h b/sound/soc/codecs/da7219.h index 1b00023e33cd..3a006862f0e7 100644 --- a/sound/soc/codecs/da7219.h +++ b/sound/soc/codecs/da7219.h @@ -781,8 +781,10 @@ #define DA7219_SYS_STAT_CHECK_DELAY 50 /* Power up/down Delays */ -#define DA7219_SETTLING_DELAY 40 -#define DA7219_MIN_GAIN_DELAY 30 +#define DA7219_SETTLING_DELAY 40 +#define DA7219_MIN_GAIN_DELAY 30 +#define DA7219_MIC_PGA_BASE_DELAY 100 +#define DA7219_MIC_PGA_OFFSET_DELAY 40 enum da7219_clk_src { DA7219_CLKSRC_MCLK = 0, @@ -828,6 +830,8 @@ struct da7219_priv { bool master; bool alc_en; + bool micbias_on_event; + unsigned int mic_pga_delay; u8 gain_ramp_ctrl; }; -- cgit v1.2.3 From f2cf0ef7c0ce141bb38f315c34c56e6ef5667a27 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Wed, 8 Aug 2018 14:19:33 -0500 Subject: ASoC: adav80x: mark expected switch fall-through In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1056531 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva Acked-by: Lars-Peter Clausen Signed-off-by: Mark Brown --- sound/soc/codecs/adav80x.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/codecs/adav80x.c b/sound/soc/codecs/adav80x.c index db21ecbe0762..8b9ca7e7a682 100644 --- a/sound/soc/codecs/adav80x.c +++ b/sound/soc/codecs/adav80x.c @@ -648,6 +648,7 @@ static int adav80x_set_pll(struct snd_soc_component *component, int pll_id, pll_ctrl1 |= ADAV80X_PLL_CTRL1_PLLDIV; break; } + /* fall through */ default: return -EINVAL; } -- cgit v1.2.3