From 8bfd174312629866efa535193d9e563768ff4307 Mon Sep 17 00:00:00 2001 From: Sui Chen Date: Tue, 9 May 2017 07:47:22 -0500 Subject: ahci: Acer SA5-271 SSD Not Detected Fix (Correction in this resend: fixed function name acer_sa5_271_workaround; fixed the always-true condition in the function; fixed description.) On the Acer Switch Alpha 12 (model number: SA5-271), the internal SSD may not get detected because the port_map and CAP.nr_ports combination causes the driver to skip the port that is actually connected to the SSD. More specifically, either all SATA ports are identified as DUMMY, or all ports get ``link down'' and never get up again. This problem occurs occasionally. When this problem occurs, CAP may hold a value of 0xC734FF00 or 0xC734FF01 and port_map may hold a value of 0x00 or 0x01. When this problem does not occur, CAP holds a value of 0xC734FF02 and port_map may hold a value of 0x07. Overriding the CAP value to 0xC734FF02 and port_map to 0x7 significantly reduces the occurrence of this problem. Link: https://bugzilla.kernel.org/attachment.cgi?id=253091 Signed-off-by: Sui Chen Tested-by: Damian Ivanov Cc: stable@vger.kernel.org Signed-off-by: Tejun Heo --- drivers/ata/ahci.c | 38 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 2fc52407306c..c69954023c2e 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -1364,6 +1364,40 @@ static inline void ahci_gtf_filter_workaround(struct ata_host *host) {} #endif +/* + * On the Acer Aspire Switch Alpha 12, sometimes all SATA ports are detected + * as DUMMY, or detected but eventually get a "link down" and never get up + * again. When this happens, CAP.NP may hold a value of 0x00 or 0x01, and the + * port_map may hold a value of 0x00. + * + * Overriding CAP.NP to 0x02 and the port_map to 0x7 will reveal all 3 ports + * and can significantly reduce the occurrence of the problem. + * + * https://bugzilla.kernel.org/show_bug.cgi?id=189471 + */ +static void acer_sa5_271_workaround(struct ahci_host_priv *hpriv, + struct pci_dev *pdev) +{ + static const struct dmi_system_id sysids[] = { + { + .ident = "Acer Switch Alpha 12", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Switch SA5-271") + }, + }, + { } + }; + + if (dmi_check_system(sysids)) { + dev_info(&pdev->dev, "enabling Acer Switch Alpha 12 workaround\n"); + if ((hpriv->saved_cap & 0xC734FF00) == 0xC734FF00) { + hpriv->port_map = 0x7; + hpriv->cap = 0xC734FF02; + } + } +} + #ifdef CONFIG_ARM64 /* * Due to ERRATA#22536, ThunderX needs to handle HOST_IRQ_STAT differently. @@ -1636,6 +1670,10 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) "online status unreliable, applying workaround\n"); } + + /* Acer SA5-271 workaround modifies private_data */ + acer_sa5_271_workaround(hpriv, pdev); + /* CAP.NP sometimes indicate the index of the last enabled * port, at other times, that of the last possible port, so * determining the maximum port number requires looking at -- cgit v1.2.3 From 5dc63fdcc09f47fb226b8bc7d83a61feb787d817 Mon Sep 17 00:00:00 2001 From: Arvind Yadav Date: Tue, 9 May 2017 16:00:28 +0530 Subject: ata: sata_rcar: Handle return value of clk_prepare_enable Here, Clock enable can failed. So adding an error check for clk_prepare_enable. tj: minor style updates Signed-off-by: Arvind Yadav Signed-off-by: Tejun Heo --- drivers/ata/sata_rcar.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c index 5d38245a7a73..b7939a2c1fab 100644 --- a/drivers/ata/sata_rcar.c +++ b/drivers/ata/sata_rcar.c @@ -890,7 +890,10 @@ static int sata_rcar_probe(struct platform_device *pdev) dev_err(&pdev->dev, "failed to get access to sata clock\n"); return PTR_ERR(priv->clk); } - clk_prepare_enable(priv->clk); + + ret = clk_prepare_enable(priv->clk); + if (ret) + return ret; host = ata_host_alloc(&pdev->dev, 1); if (!host) { @@ -970,8 +973,11 @@ static int sata_rcar_resume(struct device *dev) struct ata_host *host = dev_get_drvdata(dev); struct sata_rcar_priv *priv = host->private_data; void __iomem *base = priv->base; + int ret; - clk_prepare_enable(priv->clk); + ret = clk_prepare_enable(priv->clk); + if (ret) + return ret; /* ack and mask */ iowrite32(0, base + SATAINTSTAT_REG); @@ -988,8 +994,11 @@ static int sata_rcar_restore(struct device *dev) { struct ata_host *host = dev_get_drvdata(dev); struct sata_rcar_priv *priv = host->private_data; + int ret; - clk_prepare_enable(priv->clk); + ret = clk_prepare_enable(priv->clk); + if (ret) + return ret; sata_rcar_setup_port(host); -- cgit v1.2.3 From c034640a32f8456018d9c8c83799ead683046b95 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 16 May 2017 14:06:12 +0200 Subject: ata: libahci: properly propagate return value of platform_get_irq() When platform_get_irq() fails, it returns an error code, which libahci_platform and replaces it by -EINVAL. This commit fixes that by propagating the error code. It fixes the situation where platform_get_irq() returns -EPROBE_DEFER because the interrupt controller is not available yet, and generally looks like the right thing to do. We pay attention to not show the "no irq" message when we are in an EPROBE_DEFER situation, because the driver probing will be retried later on, once the interrupt controller becomes available to provide the interrupt. Signed-off-by: Thomas Petazzoni Reviewed-by: Hans de Goede Signed-off-by: Tejun Heo --- drivers/ata/libahci_platform.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c index aaa761b9081c..cd2eab6aa92e 100644 --- a/drivers/ata/libahci_platform.c +++ b/drivers/ata/libahci_platform.c @@ -514,8 +514,9 @@ int ahci_platform_init_host(struct platform_device *pdev, irq = platform_get_irq(pdev, 0); if (irq <= 0) { - dev_err(dev, "no irq\n"); - return -EINVAL; + if (irq != -EPROBE_DEFER) + dev_err(dev, "no irq\n"); + return irq; } hpriv->irq = irq; -- cgit v1.2.3 From 3e4240da0e3673637c1c995bdd14cfdbc8f4dc4c Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Wed, 24 May 2017 01:39:35 +0200 Subject: Revert "ata: sata_mv: Convert to devm_ioremap_resource()" This reverts commit 368e5fbdfc60732643f34f538823ed4bc8829827. devm_ioremap_resource() enforces that there are no overlapping resources, where as devm_ioremap() does not. The sata phy driver needs a subset of the sata IO address space, so maps some of the sata address space. As a result, sata_mv now fails to probe, reporting it cannot get its resources, and so we don't have any SATA disks. Signed-off-by: Andrew Lunn Acked-by: Gregory CLEMENT Cc: stable@vger.kernel.org # v4.11+ Signed-off-by: Tejun Heo --- drivers/ata/sata_mv.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index b66bcda88320..3b2246dded74 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -4067,7 +4067,6 @@ static int mv_platform_probe(struct platform_device *pdev) struct ata_host *host; struct mv_host_priv *hpriv; struct resource *res; - void __iomem *mmio; int n_ports = 0, irq = 0; int rc; int port; @@ -4086,9 +4085,8 @@ static int mv_platform_probe(struct platform_device *pdev) * Get the register base first */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - mmio = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(mmio)) - return PTR_ERR(mmio); + if (res == NULL) + return -EINVAL; /* allocate host */ if (pdev->dev.of_node) { @@ -4132,7 +4130,12 @@ static int mv_platform_probe(struct platform_device *pdev) hpriv->board_idx = chip_soc; host->iomap = NULL; - hpriv->base = mmio - SATAHC0_REG_BASE; + hpriv->base = devm_ioremap(&pdev->dev, res->start, + resource_size(res)); + if (!hpriv->base) + return -ENOMEM; + + hpriv->base -= SATAHC0_REG_BASE; hpriv->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(hpriv->clk)) -- cgit v1.2.3 From f7cf69ae171592d133c69b9adaa5de7cfb6038ea Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 31 May 2017 14:26:26 -0400 Subject: libata: fix error checking in in ata_parse_force_one() ata_parse_force_one() was incorrectly comparing @p to @endp when it should have been comparing @id. The only consequence is that it may end up using an invalid port number in "libata.force" module param instead of rejecting it. Signed-off-by: Tejun Heo Reported-by: Petru-Florin Mihancea Link: https://bugzilla.kernel.org/show_bug.cgi?id=195785 --- drivers/ata/libata-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 2d83b8c75965..e157a0e44419 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -6800,7 +6800,7 @@ static int __init ata_parse_force_one(char **cur, } force_ent->port = simple_strtoul(id, &endp, 10); - if (p == endp || *endp != '\0') { + if (id == endp || *endp != '\0') { *reason = "invalid port/link"; return -EINVAL; } -- cgit v1.2.3