From fae2a63737e5973f1426bc139935a0f42e232844 Mon Sep 17 00:00:00 2001 From: John Garry Date: Fri, 8 Jun 2018 18:26:33 +0800 Subject: libahci: Fix possible Spectre-v1 pmp indexing in ahci_led_store() Currently smatch warns of possible Spectre-V1 issue in ahci_led_store(): drivers/ata/libahci.c:1150 ahci_led_store() warn: potential spectre issue 'pp->em_priv' (local cap) Userspace controls @pmp from following callchain: em_message->store() ->ata_scsi_em_message_store() -->ap->ops->em_store() --->ahci_led_store() After the mask+shift @pmp is effectively an 8b value, which is used to index into an array of length 8, so sanitize the array index. Signed-off-by: John Garry Signed-off-by: Tejun Heo --- drivers/ata/libahci.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index 965842a08743..09620c2ffa0f 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -35,6 +35,7 @@ #include #include #include +#include #include #include #include @@ -1146,10 +1147,12 @@ static ssize_t ahci_led_store(struct ata_port *ap, const char *buf, /* get the slot number from the message */ pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8; - if (pmp < EM_MAX_SLOTS) + if (pmp < EM_MAX_SLOTS) { + pmp = array_index_nospec(pmp, EM_MAX_SLOTS); emp = &pp->em_priv[pmp]; - else + } else { return -EINVAL; + } /* mask off the activity bits if we are in sw_activity * mode, user should turn off sw_activity before setting -- cgit v1.2.3 From 95ffcf471d05ec7c91993c91dea912f99dccfc26 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 6 Jun 2018 06:56:34 +0000 Subject: ata: ahci_mvebu: ahci_mvebu_stop_engine() can be static Fixes the following sparse warning: drivers/ata/ahci_mvebu.c:85:5: warning: symbol 'ahci_mvebu_stop_engine' was not declared. Should it be static? Signed-off-by: Wei Yongjun Signed-off-by: Tejun Heo --- drivers/ata/ahci_mvebu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/ahci_mvebu.c b/drivers/ata/ahci_mvebu.c index 0045dacd814b..72d90b4c3aae 100644 --- a/drivers/ata/ahci_mvebu.c +++ b/drivers/ata/ahci_mvebu.c @@ -82,7 +82,7 @@ static void ahci_mvebu_regret_option(struct ahci_host_priv *hpriv) * * Return: 0 on success; Error code otherwise. */ -int ahci_mvebu_stop_engine(struct ata_port *ap) +static int ahci_mvebu_stop_engine(struct ata_port *ap) { void __iomem *port_mmio = ahci_port_base(ap); u32 tmp, port_fbs; -- cgit v1.2.3 From 6362f0a290023bafd7f991089e81dd9278f154b8 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 19 Jun 2018 10:12:48 -0600 Subject: libata: add command iterator helpers Now that we have the internal tag as a special (higher) value tag, it gets a bit tricky to iterate the internal commands as some loops will exceed ATA_MAX_QUEUE. Add explicit helpers for iterating pending commands, both inflight and internal. Signed-off-by: Jens Axboe Signed-off-by: Tejun Heo --- include/linux/libata.h | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/include/linux/libata.h b/include/linux/libata.h index 8b8946dd63b9..a2257e380789 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -1495,6 +1495,29 @@ static inline bool ata_tag_valid(unsigned int tag) return tag < ATA_MAX_QUEUE || ata_tag_internal(tag); } +#define __ata_qc_for_each(ap, qc, tag, max_tag, fn) \ + for ((tag) = 0; (tag) < (max_tag) && \ + ({ qc = fn((ap), (tag)); 1; }); (tag)++) \ + +/* + * Internal use only, iterate commands ignoring error handling and + * status of 'qc'. + */ +#define ata_qc_for_each_raw(ap, qc, tag) \ + __ata_qc_for_each(ap, qc, tag, ATA_MAX_QUEUE, __ata_qc_from_tag) + +/* + * Iterate all potential commands that can be queued + */ +#define ata_qc_for_each(ap, qc, tag) \ + __ata_qc_for_each(ap, qc, tag, ATA_MAX_QUEUE, ata_qc_from_tag) + +/* + * Like ata_qc_for_each, but with the internal tag included + */ +#define ata_qc_for_each_with_internal(ap, qc, tag) \ + __ata_qc_for_each(ap, qc, tag, ATA_MAX_QUEUE + 1, ata_qc_from_tag) + /* * device helpers */ -- cgit v1.2.3 From 258c4e5c65b21bdbe9735f49ea584b3059c810e4 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 19 Jun 2018 10:12:49 -0600 Subject: libata: convert eh to command iterators Signed-off-by: Jens Axboe Signed-off-by: Tejun Heo --- drivers/ata/libata-eh.c | 41 ++++++++++++++++------------------------- 1 file changed, 16 insertions(+), 25 deletions(-) diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index d5412145d76d..01306c018398 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -614,8 +614,7 @@ void ata_scsi_cmd_error_handler(struct Scsi_Host *host, struct ata_port *ap, list_for_each_entry_safe(scmd, tmp, eh_work_q, eh_entry) { struct ata_queued_cmd *qc; - for (i = 0; i < ATA_MAX_QUEUE; i++) { - qc = __ata_qc_from_tag(ap, i); + ata_qc_for_each_raw(ap, qc, i) { if (qc->flags & ATA_QCFLAG_ACTIVE && qc->scsicmd == scmd) break; @@ -818,14 +817,13 @@ EXPORT_SYMBOL_GPL(ata_port_wait_eh); static int ata_eh_nr_in_flight(struct ata_port *ap) { + struct ata_queued_cmd *qc; unsigned int tag; int nr = 0; /* count only non-internal commands */ - for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { - if (ata_tag_internal(tag)) - continue; - if (ata_qc_from_tag(ap, tag)) + ata_qc_for_each(ap, qc, tag) { + if (qc) nr++; } @@ -847,13 +845,13 @@ void ata_eh_fastdrain_timerfn(struct timer_list *t) goto out_unlock; if (cnt == ap->fastdrain_cnt) { + struct ata_queued_cmd *qc; unsigned int tag; /* No progress during the last interval, tag all * in-flight qcs as timed out and freeze the port. */ - for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { - struct ata_queued_cmd *qc = ata_qc_from_tag(ap, tag); + ata_qc_for_each(ap, qc, tag) { if (qc) qc->err_mask |= AC_ERR_TIMEOUT; } @@ -999,6 +997,7 @@ void ata_port_schedule_eh(struct ata_port *ap) static int ata_do_link_abort(struct ata_port *ap, struct ata_link *link) { + struct ata_queued_cmd *qc; int tag, nr_aborted = 0; WARN_ON(!ap->ops->error_handler); @@ -1007,9 +1006,7 @@ static int ata_do_link_abort(struct ata_port *ap, struct ata_link *link) ata_eh_set_pending(ap, 0); /* include internal tag in iteration */ - for (tag = 0; tag <= ATA_MAX_QUEUE; tag++) { - struct ata_queued_cmd *qc = ata_qc_from_tag(ap, tag); - + ata_qc_for_each_with_internal(ap, qc, tag) { if (qc && (!link || qc->dev->link == link)) { qc->flags |= ATA_QCFLAG_FAILED; ata_qc_complete(qc); @@ -1712,9 +1709,7 @@ void ata_eh_analyze_ncq_error(struct ata_link *link) return; /* has LLDD analyzed already? */ - for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { - qc = __ata_qc_from_tag(ap, tag); - + ata_qc_for_each_raw(ap, qc, tag) { if (!(qc->flags & ATA_QCFLAG_FAILED)) continue; @@ -2136,6 +2131,7 @@ static void ata_eh_link_autopsy(struct ata_link *link) { struct ata_port *ap = link->ap; struct ata_eh_context *ehc = &link->eh_context; + struct ata_queued_cmd *qc; struct ata_device *dev; unsigned int all_err_mask = 0, eflags = 0; int tag, nr_failed = 0, nr_quiet = 0; @@ -2168,9 +2164,7 @@ static void ata_eh_link_autopsy(struct ata_link *link) all_err_mask |= ehc->i.err_mask; - for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { - struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag); - + ata_qc_for_each_raw(ap, qc, tag) { if (!(qc->flags & ATA_QCFLAG_FAILED) || ata_dev_phys_link(qc->dev) != link) continue; @@ -2436,6 +2430,7 @@ static void ata_eh_link_report(struct ata_link *link) { struct ata_port *ap = link->ap; struct ata_eh_context *ehc = &link->eh_context; + struct ata_queued_cmd *qc; const char *frozen, *desc; char tries_buf[6] = ""; int tag, nr_failed = 0; @@ -2447,9 +2442,7 @@ static void ata_eh_link_report(struct ata_link *link) if (ehc->i.desc[0] != '\0') desc = ehc->i.desc; - for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { - struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag); - + ata_qc_for_each_raw(ap, qc, tag) { if (!(qc->flags & ATA_QCFLAG_FAILED) || ata_dev_phys_link(qc->dev) != link || ((qc->flags & ATA_QCFLAG_QUIET) && @@ -2511,8 +2504,7 @@ static void ata_eh_link_report(struct ata_link *link) ehc->i.serror & SERR_DEV_XCHG ? "DevExch " : ""); #endif - for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { - struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag); + ata_qc_for_each_raw(ap, qc, tag) { struct ata_taskfile *cmd = &qc->tf, *res = &qc->result_tf; char data_buf[20] = ""; char cdb_buf[70] = ""; @@ -3992,12 +3984,11 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, */ void ata_eh_finish(struct ata_port *ap) { + struct ata_queued_cmd *qc; int tag; /* retry or finish qcs */ - for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { - struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag); - + ata_qc_for_each_raw(ap, qc, tag) { if (!(qc->flags & ATA_QCFLAG_FAILED)) continue; -- cgit v1.2.3 From d3543b4d1b48afd931ed4afb6f861e6122657b6f Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 19 Jun 2018 10:12:50 -0600 Subject: sata_fsl: convert to command iterator We need to iterate all commands, including the internal one, for ATAPI error handling. Fixes: 28361c403683 ("libata: add extra internal command") Signed-off-by: Jens Axboe Signed-off-by: Tejun Heo --- drivers/ata/sata_fsl.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c index b8d9cfc60374..bb5ec5f71e73 100644 --- a/drivers/ata/sata_fsl.c +++ b/drivers/ata/sata_fsl.c @@ -1229,8 +1229,7 @@ static void sata_fsl_host_intr(struct ata_port *ap) /* Workaround for data length mismatch errata */ if (unlikely(hstatus & INT_ON_DATA_LENGTH_MISMATCH)) { - for (tag = 0; tag < ATA_MAX_QUEUE; tag++) { - qc = ata_qc_from_tag(ap, tag); + ata_qc_for_each_with_internal(ap, qc, tag) { if (qc && ata_is_atapi(qc->tf.protocol)) { u32 hcontrol; /* Set HControl[27] to clear error registers */ -- cgit v1.2.3 From eb36333de4bfba57fa6f8f88052e53180d54708e Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 19 Jun 2018 10:12:51 -0600 Subject: sata_fsl: remove dead code in tag retrieval We can never pass in the internal tag to this helper, it'll always be the hardware tag. So there's no need to check and do an internal translation of that tag. Signed-off-by: Jens Axboe Signed-off-by: Tejun Heo --- drivers/ata/sata_fsl.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c index bb5ec5f71e73..4dc528bf8e85 100644 --- a/drivers/ata/sata_fsl.c +++ b/drivers/ata/sata_fsl.c @@ -395,12 +395,6 @@ static inline unsigned int sata_fsl_tag(unsigned int tag, { /* We let libATA core do actual (queue) tag allocation */ - /* all non NCQ/queued commands should have tag#0 */ - if (ata_tag_internal(tag)) { - DPRINTK("mapping internal cmds to tag#0\n"); - return 0; - } - if (unlikely(tag >= SATA_FSL_QUEUE_DEPTH)) { DPRINTK("tag %d invalid : out of range\n", tag); return 0; -- cgit v1.2.3 From 8740fa6f5c834a881b9b0d560e62c6fe3c1e60ef Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Mon, 2 Jul 2018 08:30:22 +0100 Subject: sata_nv: remove redundant pointers sdev0 and sdev1 Pointers sdev0 and sdev1 are being assigned but are never used hence they are redundant and can be removed. Cleans up clang warnings: warning: variable 'sdev0' set but not used [-Wunused-but-set-variable] warning: variable 'sdev1' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King Signed-off-by: Tejun Heo --- drivers/ata/sata_nv.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index 10ae11aa1926..72c9b922a77b 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -675,7 +675,6 @@ static int nv_adma_slave_config(struct scsi_device *sdev) struct ata_port *ap = ata_shost_to_port(sdev->host); struct nv_adma_port_priv *pp = ap->private_data; struct nv_adma_port_priv *port0, *port1; - struct scsi_device *sdev0, *sdev1; struct pci_dev *pdev = to_pci_dev(ap->host->dev); unsigned long segment_boundary, flags; unsigned short sg_tablesize; @@ -736,8 +735,6 @@ static int nv_adma_slave_config(struct scsi_device *sdev) port0 = ap->host->ports[0]->private_data; port1 = ap->host->ports[1]->private_data; - sdev0 = ap->host->ports[0]->link.device[0].sdev; - sdev1 = ap->host->ports[1]->link.device[0].sdev; if ((port0->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) || (port1->flags & NV_ADMA_ATAPI_SETUP_COMPLETE)) { /* -- cgit v1.2.3 From 240630e61870e62e39a97225048f9945848fa5f5 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 1 Jul 2018 12:15:46 +0200 Subject: ahci: Disable LPM on Lenovo 50 series laptops with a too old BIOS There have been several reports of LPM related hard freezes about once a day on multiple Lenovo 50 series models. Strange enough these reports where not disk model specific as LPM issues usually are and some users with the exact same disk + laptop where seeing them while other users where not seeing these issues. It turns out that enabling LPM triggers a firmware bug somewhere, which has been fixed in later BIOS versions. This commit adds a new ahci_broken_lpm() function and a new ATA_FLAG_NO_LPM for dealing with this. The ahci_broken_lpm() function contains DMI match info for the 4 models which are known to be affected by this and the DMI BIOS date field for known good BIOS versions. If the BIOS date is older then the one in the table LPM will be disabled and a warning will be printed. Note the BIOS dates are for known good versions, some older versions may work too, but we don't know for sure, the table is using dates from BIOS versions for which users have confirmed that upgrading to that version makes the problem go away. Unfortunately I've been unable to get hold of the reporter who reported that BIOS version 2.35 fixed the problems on the W541 for him. I've been able to verify the DMI_SYS_VENDOR and DMI_PRODUCT_VERSION from an older dmidecode, but I don't know the exact BIOS date as reported in the DMI. Lenovo keeps a changelog with dates in their release notes, but the dates there are the release dates not the build dates which are in DMI. So I've chosen to set the date to which we compare to one day past the release date of the 2.34 BIOS. I plan to fix this with a follow up commit once I've the necessary info. Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede Signed-off-by: Tejun Heo --- drivers/ata/ahci.c | 59 +++++++++++++++++++++++++++++++++++++++++++++++ drivers/ata/libata-core.c | 3 +++ include/linux/libata.h | 1 + 3 files changed, 63 insertions(+) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 738fb22978dd..fdeb3b4d0f4a 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -1280,6 +1280,59 @@ static bool ahci_broken_suspend(struct pci_dev *pdev) return strcmp(buf, dmi->driver_data) < 0; } +static bool ahci_broken_lpm(struct pci_dev *pdev) +{ + static const struct dmi_system_id sysids[] = { + /* Various Lenovo 50 series have LPM issues with older BIOSen */ + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X250"), + }, + .driver_data = "20180406", /* 1.31 */ + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad L450"), + }, + .driver_data = "20180420", /* 1.28 */ + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T450s"), + }, + .driver_data = "20180315", /* 1.33 */ + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad W541"), + }, + /* + * Note date based on release notes, 2.35 has been + * reported to be good, but I've been unable to get + * a hold of the reporter to get the DMI BIOS date. + * TODO: fix this. + */ + .driver_data = "20180310", /* 2.35 */ + }, + { } /* terminate list */ + }; + const struct dmi_system_id *dmi = dmi_first_match(sysids); + int year, month, date; + char buf[9]; + + if (!dmi) + return false; + + dmi_get_date(DMI_BIOS_DATE, &year, &month, &date); + snprintf(buf, sizeof(buf), "%04d%02d%02d", year, month, date); + + return strcmp(buf, dmi->driver_data) < 0; +} + static bool ahci_broken_online(struct pci_dev *pdev) { #define ENCODE_BUSDEVFN(bus, slot, func) \ @@ -1694,6 +1747,12 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) "quirky BIOS, skipping spindown on poweroff\n"); } + if (ahci_broken_lpm(pdev)) { + pi.flags |= ATA_FLAG_NO_LPM; + dev_warn(&pdev->dev, + "BIOS update required for Link Power Management support\n"); + } + if (ahci_broken_suspend(pdev)) { hpriv->flags |= AHCI_HFLAG_NO_SUSPEND; dev_warn(&pdev->dev, diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 27d15ed7fa3d..cc71c63df381 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2493,6 +2493,9 @@ int ata_dev_configure(struct ata_device *dev) (id[ATA_ID_SATA_CAPABILITY] & 0xe) == 0x2) dev->horkage |= ATA_HORKAGE_NOLPM; + if (ap->flags & ATA_FLAG_NO_LPM) + dev->horkage |= ATA_HORKAGE_NOLPM; + if (dev->horkage & ATA_HORKAGE_NOLPM) { ata_dev_warn(dev, "LPM support broken, forcing max_power\n"); dev->link->ap->target_lpm_policy = ATA_LPM_MAX_POWER; diff --git a/include/linux/libata.h b/include/linux/libata.h index a2257e380789..32f247cb5e9e 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -210,6 +210,7 @@ enum { ATA_FLAG_SLAVE_POSS = (1 << 0), /* host supports slave dev */ /* (doesn't imply presence) */ ATA_FLAG_SATA = (1 << 1), + ATA_FLAG_NO_LPM = (1 << 2), /* host not happy with LPM */ ATA_FLAG_NO_LOG_PAGE = (1 << 5), /* do not issue log page read */ ATA_FLAG_NO_ATAPI = (1 << 6), /* No ATAPI support */ ATA_FLAG_PIO_DMA = (1 << 7), /* PIO cmds via DMA */ -- cgit v1.2.3 From ba44579141f9e2c0229e6e7eeb00b5fa68f0f74a Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Wed, 27 Jun 2018 15:15:40 +0300 Subject: ahci: Add Intel Ice Lake LP PCI ID This should also be using the default LPM policy for mobile chipsets so add the PCI ID to the driver list of supported devices. Signed-off-by: Mika Westerberg Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org --- drivers/ata/ahci.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index fdeb3b4d0f4a..b2b9eba1d214 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -400,6 +400,7 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(INTEL, 0x0f23), board_ahci_mobile }, /* Bay Trail AHCI */ { PCI_VDEVICE(INTEL, 0x22a3), board_ahci_mobile }, /* Cherry Tr. AHCI */ { PCI_VDEVICE(INTEL, 0x5ae3), board_ahci_mobile }, /* ApolloLake AHCI */ + { PCI_VDEVICE(INTEL, 0x34d3), board_ahci_mobile }, /* Ice Lake LP AHCI */ /* JMicron 360/1/3/5/6, match class to avoid IDE function */ { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, -- cgit v1.2.3 From b320a0a9f23c98f21631eb27bcbbca91c79b1c6e Mon Sep 17 00:00:00 2001 From: Damien Le Moal Date: Tue, 26 Jun 2018 20:56:54 +0900 Subject: ata: Fix ZBC_OUT command block check The block (LBA) specified must not exceed the last addressable LBA, which is dev->nr_sectors - 1. So fix the correct check is "if (block >= dev->n_sectors)" and not "if (block > dev->n_sectords)". Additionally, the asc/ascq to return for an LBA that is not a zone start LBA should be ILLEGAL REQUEST, regardless if the bad LBA is out of range. Reported-by: David Butterfield Signed-off-by: Damien Le Moal Cc: stable@vger.kernel.org Signed-off-by: Tejun Heo --- drivers/ata/libata-scsi.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 6a91d04351d9..a5543751f446 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -3805,8 +3805,13 @@ static unsigned int ata_scsi_zbc_out_xlat(struct ata_queued_cmd *qc) */ goto invalid_param_len; } - if (block > dev->n_sectors) - goto out_of_range; + if (block >= dev->n_sectors) { + /* + * Block must be a valid zone ID (a zone start LBA). + */ + fp = 2; + goto invalid_fld; + } all = cdb[14] & 0x1; @@ -3837,10 +3842,6 @@ static unsigned int ata_scsi_zbc_out_xlat(struct ata_queued_cmd *qc) invalid_fld: ata_scsi_set_invalid_field(qc->dev, scmd, fp, 0xff); return 1; - out_of_range: - /* "Logical Block Address out of range" */ - ata_scsi_set_sense(qc->dev, scmd, ILLEGAL_REQUEST, 0x21, 0x00); - return 1; invalid_param_len: /* "Parameter list length error" */ ata_scsi_set_sense(qc->dev, scmd, ILLEGAL_REQUEST, 0x1a, 0x0); -- cgit v1.2.3 From 6edf1d4cb0acde3a0a5dac849f33031bd7abb7b1 Mon Sep 17 00:00:00 2001 From: Damien Le Moal Date: Tue, 26 Jun 2018 20:56:55 +0900 Subject: ata: Fix ZBC_OUT all bit handling If the ALL bit is set in the ZBC_OUT command, the command zone ID field (block) should be ignored. Reported-by: David Butterfield Signed-off-by: Damien Le Moal Cc: stable@vger.kernel.org Signed-off-by: Tejun Heo --- drivers/ata/libata-scsi.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index a5543751f446..aad1b01447de 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -3805,7 +3805,14 @@ static unsigned int ata_scsi_zbc_out_xlat(struct ata_queued_cmd *qc) */ goto invalid_param_len; } - if (block >= dev->n_sectors) { + + all = cdb[14] & 0x1; + if (all) { + /* + * Ignore the block address (zone ID) as defined by ZBC. + */ + block = 0; + } else if (block >= dev->n_sectors) { /* * Block must be a valid zone ID (a zone start LBA). */ @@ -3813,8 +3820,6 @@ static unsigned int ata_scsi_zbc_out_xlat(struct ata_queued_cmd *qc) goto invalid_fld; } - all = cdb[14] & 0x1; - if (ata_ncq_enabled(qc->dev) && ata_fpdma_zac_mgmt_out_supported(qc->dev)) { tf->protocol = ATA_PROT_NCQ_NODATA; -- cgit v1.2.3 From d55bac2754476624f23bdf3b908d117f3cdf469b Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 22 Jun 2018 13:03:07 +0200 Subject: ata: Remove depends on HAS_DMA in case of platform dependency Remove dependencies on HAS_DMA where a Kconfig symbol depends on another symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TEST". In most cases this other symbol is an architecture or platform specific symbol, or PCI. Generic symbols and drivers without platform dependencies keep their dependencies on HAS_DMA, to prevent compiling subsystems or drivers that cannot work anyway. This simplifies the dependencies, and allows to improve compile-testing. Signed-off-by: Geert Uytterhoeven Reviewed-by: Mark Brown Acked-by: Robin Murphy Signed-off-by: Tejun Heo --- drivers/ata/Kconfig | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 2b16e7c8fff3..39b181d6bd0d 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -398,7 +398,6 @@ config SATA_DWC_VDEBUG config SATA_HIGHBANK tristate "Calxeda Highbank SATA support" - depends on HAS_DMA depends on ARCH_HIGHBANK || COMPILE_TEST help This option enables support for the Calxeda Highbank SoC's @@ -408,7 +407,6 @@ config SATA_HIGHBANK config SATA_MV tristate "Marvell SATA support" - depends on HAS_DMA depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \ ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST select GENERIC_PHY -- cgit v1.2.3