From 8053f21675b073b379cbca258ee4a3f3850dfa94 Mon Sep 17 00:00:00 2001 From: Nicolin Chen Date: Tue, 26 Jul 2016 14:55:51 -0700 Subject: ASoC: dapm: Add a dummy snd_pcm_runtime to avoid NULL pointer access The SND_SOC_DAPM_PRE_PMU case would call startup()/hw_params() that might access substream->runtime through other functions. For example: Unable to handle kernel NULL pointer dereference at virtual address [....] PC is at snd_pcm_hw_rule_add+0x24/0x1b0 LR is at snd_pcm_hw_constraint_list+0x20/0x28 [....] Process arecord (pid: 424, stack limit = 0xffffffc1ecaf0020) Call trace: [] snd_pcm_hw_rule_add+0x24/0x1b0 [] snd_pcm_hw_constraint_list+0x20/0x28 [] cs53l30_pcm_startup+0x24/0x30 [] snd_soc_dai_link_event+0x290/0x354 [] dapm_seq_check_event.isra.31+0x134/0x2c8 [] dapm_seq_run_coalesced+0x94/0x1c8 [] dapm_seq_run+0xa4/0x404 [] dapm_power_widgets+0x524/0x984 [] snd_soc_dapm_stream_event+0x8c/0xa8 [] soc_pcm_prepare+0x10c/0x1ec [] snd_pcm_do_prepare+0x1c/0x38 [] snd_pcm_action_single+0x40/0x88 [] snd_pcm_action_nonatomic+0x70/0x90 [] snd_pcm_common_ioctl1+0xb6c/0xdd8 [] snd_pcm_capture_ioctl1+0x200/0x334 [] snd_pcm_ioctl_compat+0x648/0x95c [] compat_SyS_ioctl+0xac/0xfc4 [] el0_svc_naked+0x24/0x28 ---[ end trace 0dc4f99c2759c35c ]--- So this patch adds a dummy runtime for the original dummy substream to merely avoid the NULL pointer access. Signed-off-by: Nicolin Chen Signed-off-by: Mark Brown --- sound/soc/soc-dapm.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 8698c26773b3..d908ff8f9755 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -3493,6 +3493,7 @@ static int snd_soc_dai_link_event(struct snd_soc_dapm_widget *w, const struct snd_soc_pcm_stream *config = w->params + w->params_select; struct snd_pcm_substream substream; struct snd_pcm_hw_params *params = NULL; + struct snd_pcm_runtime *runtime = NULL; u64 fmt; int ret; @@ -3541,6 +3542,14 @@ static int snd_soc_dai_link_event(struct snd_soc_dapm_widget *w, memset(&substream, 0, sizeof(substream)); + /* Allocate a dummy snd_pcm_runtime for startup() and other ops() */ + runtime = kzalloc(sizeof(*runtime), GFP_KERNEL); + if (!runtime) { + ret = -ENOMEM; + goto out; + } + substream.runtime = runtime; + switch (event) { case SND_SOC_DAPM_PRE_PMU: substream.stream = SNDRV_PCM_STREAM_CAPTURE; @@ -3606,6 +3615,7 @@ static int snd_soc_dai_link_event(struct snd_soc_dapm_widget *w, } out: + kfree(runtime); kfree(params); return ret; } -- cgit v1.2.3 From 93ca33c99f22a0a096f83f19c9f887aeb67507a1 Mon Sep 17 00:00:00 2001 From: Hiroyuki Yokoyama Date: Mon, 25 Jul 2016 01:52:43 +0000 Subject: ASoC: rsnd: Fixup SRCm_IFSVR calculate method This patch fixes the calculation accuracy degradation of SRCm_IFSVR register value. Signed-off-by: Hiroyuki Yokoyama Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- sound/soc/sh/rcar/src.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/sound/soc/sh/rcar/src.c b/sound/soc/sh/rcar/src.c index e39f916d0f2f..969a5169de25 100644 --- a/sound/soc/sh/rcar/src.c +++ b/sound/soc/sh/rcar/src.c @@ -226,8 +226,12 @@ static void rsnd_src_set_convert_rate(struct rsnd_dai_stream *io, ifscr = 0; fsrate = 0; if (fin != fout) { + u64 n; + ifscr = 1; - fsrate = 0x0400000 / fout * fin; + n = (u64)0x0400000 * fin; + do_div(n, fout); + fsrate = n; } /* -- cgit v1.2.3 From 3980bd3b406addb327d858aebd19e229ea340b9a Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sun, 31 Jul 2016 23:38:36 -0400 Subject: ext4: reserve xattr index for the Hurd The Hurd is using inode fields which restricts it from using more advanced ext4 file system features, due to design choices made over a decade ago. By giving the Hurd an extended attribute index field we allow it to move the translator and author fields out of the core inode fields, and hopefully we can get rid of ugly hacks such as EXT4_OS_HURD and EXT4_MOUNT2_HURD_COMPAT somday. For more information please see: https://summerofcode.withgoogle.com/projects/#5869799859027968 Signed-off-by: Theodore Ts'o --- fs/ext4/xattr.h | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/ext4/xattr.h b/fs/ext4/xattr.h index 69dd3e6566e0..a92e783fa057 100644 --- a/fs/ext4/xattr.h +++ b/fs/ext4/xattr.h @@ -24,6 +24,7 @@ #define EXT4_XATTR_INDEX_SYSTEM 7 #define EXT4_XATTR_INDEX_RICHACL 8 #define EXT4_XATTR_INDEX_ENCRYPTION 9 +#define EXT4_XATTR_INDEX_HURD 10 /* Reserved for Hurd */ struct ext4_xattr_header { __le32 h_magic; /* magic number for identification */ -- cgit v1.2.3 From 829fa70dddadf9dd041d62b82cd7cea63943899d Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Mon, 1 Aug 2016 00:51:02 -0400 Subject: ext4: validate that metadata blocks do not overlap superblock A number of fuzzing failures seem to be caused by allocation bitmaps or other metadata blocks being pointed at the superblock. This can cause kernel BUG or WARNings once the superblock is overwritten, so validate the group descriptor blocks to make sure this doesn't happen. Cc: stable@vger.kernel.org Signed-off-by: Theodore Ts'o --- fs/ext4/super.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index c13a4e464738..da3146e8d49a 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -2211,6 +2211,7 @@ void ext4_group_desc_csum_set(struct super_block *sb, __u32 block_group, /* Called at mount-time, super-block is locked */ static int ext4_check_descriptors(struct super_block *sb, + ext4_fsblk_t sb_block, ext4_group_t *first_not_zeroed) { struct ext4_sb_info *sbi = EXT4_SB(sb); @@ -2241,6 +2242,11 @@ static int ext4_check_descriptors(struct super_block *sb, grp = i; block_bitmap = ext4_block_bitmap(sb, gdp); + if (block_bitmap == sb_block) { + ext4_msg(sb, KERN_ERR, "ext4_check_descriptors: " + "Block bitmap for group %u overlaps " + "superblock", i); + } if (block_bitmap < first_block || block_bitmap > last_block) { ext4_msg(sb, KERN_ERR, "ext4_check_descriptors: " "Block bitmap for group %u not in group " @@ -2248,6 +2254,11 @@ static int ext4_check_descriptors(struct super_block *sb, return 0; } inode_bitmap = ext4_inode_bitmap(sb, gdp); + if (inode_bitmap == sb_block) { + ext4_msg(sb, KERN_ERR, "ext4_check_descriptors: " + "Inode bitmap for group %u overlaps " + "superblock", i); + } if (inode_bitmap < first_block || inode_bitmap > last_block) { ext4_msg(sb, KERN_ERR, "ext4_check_descriptors: " "Inode bitmap for group %u not in group " @@ -2255,6 +2266,11 @@ static int ext4_check_descriptors(struct super_block *sb, return 0; } inode_table = ext4_inode_table(sb, gdp); + if (inode_table == sb_block) { + ext4_msg(sb, KERN_ERR, "ext4_check_descriptors: " + "Inode table for group %u overlaps " + "superblock", i); + } if (inode_table < first_block || inode_table + sbi->s_itb_per_group - 1 > last_block) { ext4_msg(sb, KERN_ERR, "ext4_check_descriptors: " @@ -3757,7 +3773,7 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent) goto failed_mount2; } } - if (!ext4_check_descriptors(sb, &first_not_zeroed)) { + if (!ext4_check_descriptors(sb, logical_sb_block, &first_not_zeroed)) { ext4_msg(sb, KERN_ERR, "group descriptors corrupted!"); ret = -EFSCORRUPTED; goto failed_mount2; -- cgit v1.2.3 From 2392f7fd695246df4fb5f0b5fb88ce37cdb01764 Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Tue, 26 Jul 2016 18:06:39 +0530 Subject: ASoC: Intel: Skylake: Check list empty while getting module info Module list can be NULL so check if the list is empty before accessing the list. Signed-off-by: Senthilnathan Veppur Signed-off-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl-sst-utils.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/sound/soc/intel/skylake/skl-sst-utils.c b/sound/soc/intel/skylake/skl-sst-utils.c index 25fcb796bd86..ddcb52a51854 100644 --- a/sound/soc/intel/skylake/skl-sst-utils.c +++ b/sound/soc/intel/skylake/skl-sst-utils.c @@ -123,6 +123,11 @@ int snd_skl_get_module_info(struct skl_sst *ctx, u8 *uuid, uuid_mod = (uuid_le *)uuid; + if (list_empty(&ctx->uuid_list)) { + dev_err(ctx->dev, "Module list is empty\n"); + return -EINVAL; + } + list_for_each_entry(module, &ctx->uuid_list, list) { if (uuid_le_cmp(*uuid_mod, module->uuid) == 0) { dfw_config->module_id = module->id; -- cgit v1.2.3 From 1f85e118c81d15aa9e002604dfb69c823d4aac16 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 3 Aug 2016 01:24:05 +0000 Subject: ASoC: simple-card-utils: add missing MODULE_xxx() simple-card-utils might be used as module, but MODULE_xxx() information was missed. This patch adds it. Otherwise, we will have below error, and can't use it. Specil thanks to Kevin. > insmod simple-card-utils.ko simple_card_utils: module license 'unspecified' taints kernel. Disabling lock debugging due to kernel taint simple_card_utils: Unknown symbol snd_soc_of_parse_daifmt (err 0) simple_card_utils: Unknown symbol snd_soc_of_parse_card_name (err 0) insmod: can't insert 'simple-card-utils.ko': \ unknown symbol in module, or unknown parameter Reported-by: Kevin Hilman Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- sound/soc/generic/Makefile | 6 +++--- sound/soc/generic/simple-card-utils.c | 6 ++++++ 2 files changed, 9 insertions(+), 3 deletions(-) diff --git a/sound/soc/generic/Makefile b/sound/soc/generic/Makefile index 45602ca8536e..2d53c8d70705 100644 --- a/sound/soc/generic/Makefile +++ b/sound/soc/generic/Makefile @@ -1,5 +1,5 @@ -obj-$(CONFIG_SND_SIMPLE_CARD_UTILS) := simple-card-utils.o - +snd-soc-simple-card-utils-objs := simple-card-utils.o snd-soc-simple-card-objs := simple-card.o -obj-$(CONFIG_SND_SIMPLE_CARD) += snd-soc-simple-card.o +obj-$(CONFIG_SND_SIMPLE_CARD_UTILS) += snd-soc-simple-card-utils.o +obj-$(CONFIG_SND_SIMPLE_CARD) += snd-soc-simple-card.o diff --git a/sound/soc/generic/simple-card-utils.c b/sound/soc/generic/simple-card-utils.c index d89a9a1b2471..9599de69a880 100644 --- a/sound/soc/generic/simple-card-utils.c +++ b/sound/soc/generic/simple-card-utils.c @@ -7,6 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include #include #include @@ -95,3 +96,8 @@ int asoc_simple_card_parse_card_name(struct snd_soc_card *card, return 0; } EXPORT_SYMBOL_GPL(asoc_simple_card_parse_card_name); + +/* Module information */ +MODULE_AUTHOR("Kuninori Morimoto "); +MODULE_DESCRIPTION("ALSA SoC Simple Card Utils"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3 From 1bc610e7a17dcf5165f1ed4e0201ee080ba1a0df Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Thu, 4 Aug 2016 11:51:25 +0200 Subject: ASoC: samsung: Fix clock handling in S3C24XX_UDA134X card There is no "pclk" alias in the s3c2440 clk driver for "soc-audio" device so related clk_get() fails, which prevents any operation of the S3C24XX_UDA134X sound card. Instead we get the clock on behalf of the I2S device, i.e. we use the I2S block gate clock which has PCLK is its parent clock. Without this patch there is an error like: s3c24xx_uda134x_startup cannot get pclk ASoC: UDA134X startup failed: -2 Signed-off-by: Sylwester Nawrocki Signed-off-by: Mark Brown --- sound/soc/samsung/s3c24xx_uda134x.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/sound/soc/samsung/s3c24xx_uda134x.c b/sound/soc/samsung/s3c24xx_uda134x.c index 50849e137fc0..92e88bca386e 100644 --- a/sound/soc/samsung/s3c24xx_uda134x.c +++ b/sound/soc/samsung/s3c24xx_uda134x.c @@ -58,10 +58,12 @@ static struct platform_device *s3c24xx_uda134x_snd_device; static int s3c24xx_uda134x_startup(struct snd_pcm_substream *substream) { - int ret = 0; + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *cpu_dai = rtd->cpu_dai; #ifdef ENFORCE_RATES struct snd_pcm_runtime *runtime = substream->runtime; #endif + int ret = 0; mutex_lock(&clk_lock); pr_debug("%s %d\n", __func__, clk_users); @@ -71,8 +73,7 @@ static int s3c24xx_uda134x_startup(struct snd_pcm_substream *substream) printk(KERN_ERR "%s cannot get xtal\n", __func__); ret = PTR_ERR(xtal); } else { - pclk = clk_get(&s3c24xx_uda134x_snd_device->dev, - "pclk"); + pclk = clk_get(cpu_dai->dev, "iis"); if (IS_ERR(pclk)) { printk(KERN_ERR "%s cannot get pclk\n", __func__); -- cgit v1.2.3 From ca6ac305f017472a172e53345264abdb495eba46 Mon Sep 17 00:00:00 2001 From: John Hsu Date: Thu, 4 Aug 2016 16:52:06 +0800 Subject: ASoC: nau8825: fix bug in playback when suspend In chromium, the following steps will make codec function fail. \1. plug in headphones, Play music \2. run "powerd_dbus_suspend" \3. resume from S3 After resume, the jack detection will restart and make configuration for the headset. Meanwhile, the playback prepares and starts to work. The two sequences will conflict and make wrong register configuration. Originally, the driver adds protection for the case when it finds the playback is active. But the "powerd_dbus_suspend" command will close the pcm stream before suspend. Therefore, the driver can't detect the playback after resume, and the protection not works. For the issue, the driver raises protection every time after resume. The protection will release after jack detection and configuration completes, and then the playback just will goes on. Signed-off-by: John Hsu Signed-off-by: Mark Brown --- sound/soc/codecs/nau8825.c | 51 +++++++++++----------------------------------- 1 file changed, 12 insertions(+), 39 deletions(-) diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c index 5c9707ac4bbf..20d2f1578b87 100644 --- a/sound/soc/codecs/nau8825.c +++ b/sound/soc/codecs/nau8825.c @@ -212,31 +212,6 @@ static const unsigned short logtable[256] = { 0xfa2f, 0xfaea, 0xfba5, 0xfc60, 0xfd1a, 0xfdd4, 0xfe8e, 0xff47 }; -static struct snd_soc_dai *nau8825_get_codec_dai(struct nau8825 *nau8825) -{ - struct snd_soc_codec *codec = snd_soc_dapm_to_codec(nau8825->dapm); - struct snd_soc_component *component = &codec->component; - struct snd_soc_dai *codec_dai, *_dai; - - list_for_each_entry_safe(codec_dai, _dai, &component->dai_list, list) { - if (!strncmp(codec_dai->name, NUVOTON_CODEC_DAI, - strlen(NUVOTON_CODEC_DAI))) - return codec_dai; - } - return NULL; -} - -static bool nau8825_dai_is_active(struct nau8825 *nau8825) -{ - struct snd_soc_dai *codec_dai = nau8825_get_codec_dai(nau8825); - - if (codec_dai) { - if (codec_dai->playback_active || codec_dai->capture_active) - return true; - } - return false; -} - /** * nau8825_sema_acquire - acquire the semaphore of nau88l25 * @nau8825: component to register the codec private data with @@ -1205,6 +1180,8 @@ static int nau8825_hw_params(struct snd_pcm_substream *substream, struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec); unsigned int val_len = 0; + nau8825_sema_acquire(nau8825, 2 * HZ); + switch (params_width(params)) { case 16: val_len |= NAU8825_I2S_DL_16; @@ -1225,6 +1202,9 @@ static int nau8825_hw_params(struct snd_pcm_substream *substream, regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL1, NAU8825_I2S_DL_MASK, val_len); + /* Release the semaphone. */ + nau8825_sema_release(nau8825); + return 0; } @@ -1234,6 +1214,8 @@ static int nau8825_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec); unsigned int ctrl1_val = 0, ctrl2_val = 0; + nau8825_sema_acquire(nau8825, 2 * HZ); + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { case SND_SOC_DAIFMT_CBM_CFM: ctrl2_val |= NAU8825_I2S_MS_MASTER; @@ -1282,6 +1264,9 @@ static int nau8825_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL2, NAU8825_I2S_MS_MASK, ctrl2_val); + /* Release the semaphone. */ + nau8825_sema_release(nau8825); + return 0; } @@ -2241,20 +2226,8 @@ static int __maybe_unused nau8825_resume(struct snd_soc_codec *codec) regcache_cache_only(nau8825->regmap, false); regcache_sync(nau8825->regmap); - if (nau8825_is_jack_inserted(nau8825->regmap)) { - /* If the jack is inserted, we need to check whether the play- - * back is active before suspend. If active, the driver has to - * raise the protection for cross talk function to avoid the - * playback recovers before cross talk process finish. Other- - * wise, the playback will be interfered by cross talk func- - * tion. It is better to apply hardware related parameters - * before starting playback or record. - */ - if (nau8825_dai_is_active(nau8825)) { - nau8825->xtalk_protect = true; - nau8825_sema_acquire(nau8825, 0); - } - } + nau8825->xtalk_protect = true; + nau8825_sema_acquire(nau8825, 0); enable_irq(nau8825->irq); return 0; -- cgit v1.2.3 From 06746c672cdd60715ee57ab1aced95a9e536fd4d Mon Sep 17 00:00:00 2001 From: John Hsu Date: Thu, 4 Aug 2016 16:52:07 +0800 Subject: ASoC: nau8825: fix static check error about semaphone control The patch is to fix the static check error as the following. The patch commit b50455fab459 ("ASoC: nau8825: cross talk suppression measurement function") from Jun 7, 2016, leads to the following static checker warning: sound/soc/codecs/nau8825.c:265 nau8825_sema_acquire() warn: 'sem:&nau8825->xtalk_sem' is sometimes locked here and sometimes unlocked. The semaphone acquire function has return value, and some callers can do error handling when lock fails. Signed-off-by: John Hsu Signed-off-by: Mark Brown --- sound/soc/codecs/nau8825.c | 29 +++++++++++++++++++++-------- 1 file changed, 21 insertions(+), 8 deletions(-) diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c index 20d2f1578b87..2e59a85e360b 100644 --- a/sound/soc/codecs/nau8825.c +++ b/sound/soc/codecs/nau8825.c @@ -225,19 +225,26 @@ static const unsigned short logtable[256] = { * Acquires the semaphore without jiffies. If no more tasks are allowed * to acquire the semaphore, calling this function will put the task to * sleep until the semaphore is released. - * It returns if the semaphore was acquired. + * If the semaphore is not released within the specified number of jiffies, + * this function returns -ETIME. + * If the sleep is interrupted by a signal, this function will return -EINTR. + * It returns 0 if the semaphore was acquired successfully. */ -static void nau8825_sema_acquire(struct nau8825 *nau8825, long timeout) +static int nau8825_sema_acquire(struct nau8825 *nau8825, long timeout) { int ret; - if (timeout) + if (timeout) { ret = down_timeout(&nau8825->xtalk_sem, timeout); - else + if (ret < 0) + dev_warn(nau8825->dev, "Acquire semaphone timeout\n"); + } else { ret = down_interruptible(&nau8825->xtalk_sem); + if (ret < 0) + dev_warn(nau8825->dev, "Acquire semaphone fail\n"); + } - if (ret < 0) - dev_warn(nau8825->dev, "Acquire semaphone fail\n"); + return ret; } /** @@ -1596,8 +1603,11 @@ static irqreturn_t nau8825_interrupt(int irq, void *data) * cess and restore changes if process * is ongoing when ejection. */ + int ret; nau8825->xtalk_protect = true; - nau8825_sema_acquire(nau8825, 0); + ret = nau8825_sema_acquire(nau8825, 0); + if (ret < 0) + nau8825->xtalk_protect = false; } /* Startup cross talk detection process */ nau8825->xtalk_state = NAU8825_XTALK_PREPARE; @@ -2223,11 +2233,14 @@ static int __maybe_unused nau8825_suspend(struct snd_soc_codec *codec) static int __maybe_unused nau8825_resume(struct snd_soc_codec *codec) { struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec); + int ret; regcache_cache_only(nau8825->regmap, false); regcache_sync(nau8825->regmap); nau8825->xtalk_protect = true; - nau8825_sema_acquire(nau8825, 0); + ret = nau8825_sema_acquire(nau8825, 0); + if (ret < 0) + nau8825->xtalk_protect = false; enable_irq(nau8825->irq); return 0; -- cgit v1.2.3 From 5d764912a0ee6db83e962c1501b5b9e58ba14e15 Mon Sep 17 00:00:00 2001 From: Adam Thomson Date: Thu, 4 Aug 2016 15:35:37 +0100 Subject: ASoC: da7213: Default to 64 BCLKs per WCLK to support all formats Previously code defaulted to 32 BCLKS per WCLK which meant 24 and 32 bit DAI formats would not work properly. This patch fixes the issue by defaulting to 64 BCLKs per WCLK. Signed-off-by: Adam Thomson Signed-off-by: Mark Brown --- sound/soc/codecs/da7213.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/da7213.c b/sound/soc/codecs/da7213.c index e5527bc570ae..bcf1834c5648 100644 --- a/sound/soc/codecs/da7213.c +++ b/sound/soc/codecs/da7213.c @@ -1247,8 +1247,8 @@ static int da7213_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) return -EINVAL; } - /* By default only 32 BCLK per WCLK is supported */ - dai_clk_mode |= DA7213_DAI_BCLKS_PER_WCLK_32; + /* By default only 64 BCLK per WCLK is supported */ + dai_clk_mode |= DA7213_DAI_BCLKS_PER_WCLK_64; snd_soc_write(codec, DA7213_DAI_CLK_MODE, dai_clk_mode); snd_soc_update_bits(codec, DA7213_DAI_CTRL, DA7213_DAI_FORMAT_MASK, -- cgit v1.2.3 From ea0a95d7f162bfa1c9df74471f0064f71cdf80ea Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 25 Jul 2016 07:00:33 +0000 Subject: fcoe: Use kfree_skb() instead of kfree() Use kfree_skb() instead of kfree() to free sk_buff. Signed-off-by: Wei Yongjun Acked-by: Johannes Thumshirn Signed-off-by: Martin K. Petersen --- drivers/scsi/fcoe/fcoe_ctlr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/fcoe/fcoe_ctlr.c b/drivers/scsi/fcoe/fcoe_ctlr.c index a569c65f22b1..dcf36537a767 100644 --- a/drivers/scsi/fcoe/fcoe_ctlr.c +++ b/drivers/scsi/fcoe/fcoe_ctlr.c @@ -2923,7 +2923,7 @@ static int fcoe_ctlr_vlan_recv(struct fcoe_ctlr *fip, struct sk_buff *skb) mutex_unlock(&fip->ctlr_mutex); drop: - kfree(skb); + kfree_skb(skb); return rc; } -- cgit v1.2.3 From 925baf394bb0e65d85330afe467393f66f910353 Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Wed, 27 Jul 2016 08:41:49 +0300 Subject: tools/gpio: fix gpio-event-mon header comment Fixes: 97f69747d8b1 ('tools/gpio: add the gpio-event-mon tool') Signed-off-by: Baruch Siach Signed-off-by: Linus Walleij --- tools/gpio/gpio-event-mon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/gpio/gpio-event-mon.c b/tools/gpio/gpio-event-mon.c index 448ed96b3b4f..1c14c2595158 100644 --- a/tools/gpio/gpio-event-mon.c +++ b/tools/gpio/gpio-event-mon.c @@ -1,5 +1,5 @@ /* - * gpio-hammer - example swiss army knife to shake GPIO lines on a system + * gpio-event-mon - monitor GPIO line events from userspace * * Copyright (C) 2016 Linus Walleij * -- cgit v1.2.3 From cf1b18030de29e4e5b0a57695ae5db4a89da0ff7 Mon Sep 17 00:00:00 2001 From: Lubomir Rintel Date: Sun, 24 Jul 2016 13:53:30 +0200 Subject: USB: serial: option: add D-Link DWM-156/A3 The device has four interfaces; the three serial ports ought to be handled by this driver: 00 Diagnostic interface serial port 01 NMEA device serial port 02 Mass storage (sd card) 03 Modem serial port The other product ids listed in the Windows driver are present already. Signed-off-by: Lubomir Rintel Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 8e07536c233a..0338851e31a2 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1966,6 +1966,7 @@ static const struct usb_device_id option_ids[] = { .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */ { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/C1 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x7e11, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/A3 */ { USB_DEVICE_INTERFACE_CLASS(0x2020, 0x4000, 0xff) }, /* OLICARD300 - MT6225 */ { USB_DEVICE(INOVIA_VENDOR_ID, INOVIA_SEW858) }, { USB_DEVICE(VIATELECOM_VENDOR_ID, VIATELECOM_PRODUCT_CDS7) }, -- cgit v1.2.3 From 6977495c06f7f47636a076ee5a0ca571279d9697 Mon Sep 17 00:00:00 2001 From: Robert DeliĆ«n Date: Thu, 28 Jul 2016 18:52:55 +0000 Subject: USB: serial: ftdi_sio: add PIDs for Ivium Technologies devices Ivium Technologies uses the FTDI VID with custom PIDs for their line of electrochemical interfaces and the PalmSens they developed for PalmSens BV. Signed-off-by: Robert Delien Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/ftdi_sio.c | 2 ++ drivers/usb/serial/ftdi_sio_ids.h | 6 ++++++ 2 files changed, 8 insertions(+) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 00820809139a..8962cdcfe9ff 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -648,6 +648,8 @@ static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(FTDI_VID, FTDI_ELV_TFD128_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_FM3RX_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_WS777_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_PALMSENS_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_IVIUM_XSTAT_PID) }, { USB_DEVICE(FTDI_VID, LINX_SDMUSBQSS_PID) }, { USB_DEVICE(FTDI_VID, LINX_MASTERDEVEL2_PID) }, { USB_DEVICE(FTDI_VID, LINX_FUTURE_0_PID) }, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index c5d6c1e73e8e..067e3a6300d1 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -405,6 +405,12 @@ #define FTDI_4N_GALAXY_DE_2_PID 0xF3C1 #define FTDI_4N_GALAXY_DE_3_PID 0xF3C2 +/* + * Ivium Technologies product IDs + */ +#define FTDI_PALMSENS_PID 0xf440 +#define FTDI_IVIUM_XSTAT_PID 0xf441 + /* * Linx Technologies product ids */ -- cgit v1.2.3 From ae34d12cc1e212ffcd92e069030e54dae69c832f Mon Sep 17 00:00:00 2001 From: "Sheng-Hui J. Chu" Date: Thu, 28 Jul 2016 17:01:45 -0400 Subject: USB: serial: ftdi_sio: add device ID for WICED USB UART dev board BCM20706V2_EVAL is a WICED dev board designed with FT2232H USB 2.0 UART/FIFO IC. To support BCM920706V2_EVAL dev board for WICED development on Linux. Add the VID(0a5c) and PID(6422) to ftdi_sio driver to allow loading ftdi_sio for this board. Signed-off-by: Sheng-Hui J. Chu Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/ftdi_sio_ids.h | 6 ++++++ 2 files changed, 7 insertions(+) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 8962cdcfe9ff..b2d767e743fc 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1010,6 +1010,7 @@ static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(ICPDAS_VID, ICPDAS_I7560U_PID) }, { USB_DEVICE(ICPDAS_VID, ICPDAS_I7561U_PID) }, { USB_DEVICE(ICPDAS_VID, ICPDAS_I7563U_PID) }, + { USB_DEVICE(WICED_VID, WICED_USB20706V2_PID) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 067e3a6300d1..f87a938cf005 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -678,6 +678,12 @@ #define INTREPID_VALUECAN_PID 0x0601 #define INTREPID_NEOVI_PID 0x0701 +/* + * WICED USB UART + */ +#define WICED_VID 0x0A5C +#define WICED_USB20706V2_PID 0x6422 + /* * Definitions for ID TECH (www.idt-net.com) devices */ -- cgit v1.2.3 From 01d7956b58e644ea0d2e8d9340c5727a8fc39d70 Mon Sep 17 00:00:00 2001 From: Daniele Palmas Date: Tue, 2 Aug 2016 11:29:25 +0200 Subject: USB: serial: option: add support for Telit LE920A4 This patch adds a set of compositions for Telit LE920A4. Compositions in short are: 0x1207: tty + tty 0x1208: tty + adb + tty + tty 0x1211: tty + adb + ecm 0x1212: tty + adb 0x1213: ecm + tty 0x1214: tty + adb + ecm + tty telit_le922_blacklist_usbcfg3 is reused for compositions 0x1211 and 0x1214 due to the same interfaces positions. Signed-off-by: Daniele Palmas Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 0338851e31a2..bc472584a229 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -274,6 +274,12 @@ static void option_instat_callback(struct urb *urb); #define TELIT_PRODUCT_LE920 0x1200 #define TELIT_PRODUCT_LE910 0x1201 #define TELIT_PRODUCT_LE910_USBCFG4 0x1206 +#define TELIT_PRODUCT_LE920A4_1207 0x1207 +#define TELIT_PRODUCT_LE920A4_1208 0x1208 +#define TELIT_PRODUCT_LE920A4_1211 0x1211 +#define TELIT_PRODUCT_LE920A4_1212 0x1212 +#define TELIT_PRODUCT_LE920A4_1213 0x1213 +#define TELIT_PRODUCT_LE920A4_1214 0x1214 /* ZTE PRODUCTS */ #define ZTE_VENDOR_ID 0x19d2 @@ -628,6 +634,11 @@ static const struct option_blacklist_info telit_le920_blacklist = { .reserved = BIT(1) | BIT(5), }; +static const struct option_blacklist_info telit_le920a4_blacklist_1 = { + .sendsetup = BIT(0), + .reserved = BIT(1), +}; + static const struct option_blacklist_info telit_le922_blacklist_usbcfg0 = { .sendsetup = BIT(2), .reserved = BIT(0) | BIT(1) | BIT(3), @@ -1203,6 +1214,16 @@ static const struct usb_device_id option_ids[] = { .driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920), .driver_info = (kernel_ulong_t)&telit_le920_blacklist }, + { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1207) }, + { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1208), + .driver_info = (kernel_ulong_t)&telit_le920a4_blacklist_1 }, + { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1211), + .driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 }, + { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1212), + .driver_info = (kernel_ulong_t)&telit_le920a4_blacklist_1 }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1213, 0xff) }, + { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1214), + .driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf1_blacklist }, -- cgit v1.2.3 From 647024a7df36014bbc4479d92d88e6b77c0afcf6 Mon Sep 17 00:00:00 2001 From: Alexey Klimov Date: Mon, 8 Aug 2016 02:34:46 +0100 Subject: USB: serial: fix memleak in driver-registration error path udriver struct allocated by kzalloc() will not be freed if usb_register() and next calls fail. This patch fixes this by adding one more step with kfree(udriver) in error path. Signed-off-by: Alexey Klimov Acked-by: Alan Stern Cc: stable Signed-off-by: Johan Hovold --- drivers/usb/serial/usb-serial.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index b1b9bac44016..d213cf44a7e4 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -1433,7 +1433,7 @@ int usb_serial_register_drivers(struct usb_serial_driver *const serial_drivers[] rc = usb_register(udriver); if (rc) - return rc; + goto failed_usb_register; for (sd = serial_drivers; *sd; ++sd) { (*sd)->usb_driver = udriver; @@ -1451,6 +1451,8 @@ int usb_serial_register_drivers(struct usb_serial_driver *const serial_drivers[] while (sd-- > serial_drivers) usb_serial_deregister(*sd); usb_deregister(udriver); +failed_usb_register: + kfree(udriver); return rc; } EXPORT_SYMBOL_GPL(usb_serial_register_drivers); -- cgit v1.2.3 From fa00c437eef8dc2e7b25f8cd868cfa405fcc2bb3 Mon Sep 17 00:00:00 2001 From: Dave Carroll Date: Fri, 5 Aug 2016 13:44:10 -0600 Subject: aacraid: Check size values after double-fetch from user In aacraid's ioctl_send_fib() we do two fetches from userspace, one the get the fib header's size and one for the fib itself. Later we use the size field from the second fetch to further process the fib. If for some reason the size from the second fetch is different than from the first fix, we may encounter an out-of- bounds access in aac_fib_send(). We also check the sender size to insure it is not out of bounds. This was reported in https://bugzilla.kernel.org/show_bug.cgi?id=116751 and was assigned CVE-2016-6480. Reported-by: Pengfei Wang Fixes: 7c00ffa31 '[SCSI] 2.6 aacraid: Variable FIB size (updated patch)' Cc: stable@vger.kernel.org Signed-off-by: Dave Carroll Reviewed-by: Johannes Thumshirn Signed-off-by: Martin K. Petersen --- drivers/scsi/aacraid/commctrl.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/aacraid/commctrl.c b/drivers/scsi/aacraid/commctrl.c index b381b3718a98..5648b715fed9 100644 --- a/drivers/scsi/aacraid/commctrl.c +++ b/drivers/scsi/aacraid/commctrl.c @@ -63,7 +63,7 @@ static int ioctl_send_fib(struct aac_dev * dev, void __user *arg) struct fib *fibptr; struct hw_fib * hw_fib = (struct hw_fib *)0; dma_addr_t hw_fib_pa = (dma_addr_t)0LL; - unsigned size; + unsigned int size, osize; int retval; if (dev->in_reset) { @@ -87,7 +87,8 @@ static int ioctl_send_fib(struct aac_dev * dev, void __user *arg) * will not overrun the buffer when we copy the memory. Return * an error if we would. */ - size = le16_to_cpu(kfib->header.Size) + sizeof(struct aac_fibhdr); + osize = size = le16_to_cpu(kfib->header.Size) + + sizeof(struct aac_fibhdr); if (size < le16_to_cpu(kfib->header.SenderSize)) size = le16_to_cpu(kfib->header.SenderSize); if (size > dev->max_fib_size) { @@ -118,6 +119,14 @@ static int ioctl_send_fib(struct aac_dev * dev, void __user *arg) goto cleanup; } + /* Sanity check the second copy */ + if ((osize != le16_to_cpu(kfib->header.Size) + + sizeof(struct aac_fibhdr)) + || (size < le16_to_cpu(kfib->header.SenderSize))) { + retval = -EINVAL; + goto cleanup; + } + if (kfib->header.Command == cpu_to_le16(TakeABreakPt)) { aac_adapter_interrupt(dev); /* -- cgit v1.2.3 From c39b487f195b93235ee76384427467786f7bf29f Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 9 Aug 2016 00:20:28 -0400 Subject: Revert "drm/amdgpu: work around lack of upstream ACPI support for D3cold" This reverts commit c63695cc5e5f685e924e25a8f9555f6e846f1fc6. Now that d3cold support is upstream, there is no more need for this workaround. bug: https://bugs.freedesktop.org/show_bug.cgi?id=97248 --- drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c index 49de92600074..10b5ddf2c588 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c @@ -200,16 +200,7 @@ static int amdgpu_atpx_validate(struct amdgpu_atpx *atpx) atpx->is_hybrid = false; if (valid_bits & ATPX_MS_HYBRID_GFX_SUPPORTED) { printk("ATPX Hybrid Graphics\n"); -#if 1 - /* This is a temporary hack until the D3 cold support - * makes it upstream. The ATPX power_control method seems - * to still work on even if the system should be using - * the new standardized hybrid D3 cold ACPI interface. - */ - atpx->functions.power_cntl = true; -#else atpx->functions.power_cntl = false; -#endif atpx->is_hybrid = true; } -- cgit v1.2.3 From b817634276f7f68c9d1d6d4a27117ff3c2f16956 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 9 Aug 2016 00:21:45 -0400 Subject: Revert "drm/radeon: work around lack of upstream ACPI support for D3cold" This reverts commit bdfb76040068d960cb9e226876be8a508d741c4a. Now that d3cold is upstream, there is no more need for this workaround. --- drivers/gpu/drm/radeon/radeon_atpx_handler.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_atpx_handler.c b/drivers/gpu/drm/radeon/radeon_atpx_handler.c index 6de342861202..ddef0d494084 100644 --- a/drivers/gpu/drm/radeon/radeon_atpx_handler.c +++ b/drivers/gpu/drm/radeon/radeon_atpx_handler.c @@ -198,16 +198,7 @@ static int radeon_atpx_validate(struct radeon_atpx *atpx) atpx->is_hybrid = false; if (valid_bits & ATPX_MS_HYBRID_GFX_SUPPORTED) { printk("ATPX Hybrid Graphics\n"); -#if 1 - /* This is a temporary hack until the D3 cold support - * makes it upstream. The ATPX power_control method seems - * to still work on even if the system should be using - * the new standardized hybrid D3 cold ACPI interface. - */ - atpx->functions.power_cntl = true; -#else atpx->functions.power_cntl = false; -#endif atpx->is_hybrid = true; } -- cgit v1.2.3 From 6dae61627d1004895bfcee81d24482ec64cbecc5 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Wed, 13 Jul 2016 08:36:03 +0100 Subject: drm/amdkfd: print doorbell offset as a hex value The doorbell offset is formatted with a 0x prefix to suggest it is a hexadecimal value, when in fact %d is being used and this is confusing. Use %X instead to match the proceeding 0x prefix. Signed-off-by: Colin Ian King Signed-off-by: Oded Gabbay --- drivers/gpu/drm/amd/amdkfd/kfd_doorbell.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_doorbell.c b/drivers/gpu/drm/amd/amdkfd/kfd_doorbell.c index e621eba63126..a7d3cb3fead0 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_doorbell.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_doorbell.c @@ -184,7 +184,7 @@ u32 __iomem *kfd_get_kernel_doorbell(struct kfd_dev *kfd, sizeof(u32)) + inx; pr_debug("kfd: get kernel queue doorbell\n" - " doorbell offset == 0x%08d\n" + " doorbell offset == 0x%08X\n" " kernel address == 0x%08lX\n", *doorbell_off, (uintptr_t)(kfd->doorbell_kernel_ptr + inx)); -- cgit v1.2.3 From 6bb47e8ab98accb1319bd43c64966340ba3bba9a Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 4 Aug 2016 13:32:22 -0700 Subject: usb: hub: Fix unbalanced reference count/memory leak/deadlocks Memory leak and unbalanced reference count: If the hub gets disconnected while the core is still activating it, this can result in leaking memory of few USB structures. This will happen if we have done a kref_get() from hub_activate() and scheduled a delayed work item for HUB_INIT2/3. Now if hub_disconnect() gets called before the delayed work expires, then we will cancel the work from hub_quiesce(), but wouldn't do a kref_put(). And so the unbalance. kmemleak reports this as (with the commit e50293ef9775 backported to 3.10 kernel with other changes, though the same is true for mainline as well): unreferenced object 0xffffffc08af5b800 (size 1024): comm "khubd", pid 73, jiffies 4295051211 (age 6482.350s) hex dump (first 32 bytes): 30 68 f3 8c c0 ff ff ff 00 a0 b2 2e c0 ff ff ff 0h.............. 01 00 00 00 00 00 00 00 00 94 7d 40 c0 ff ff ff ..........}@.... backtrace: [] create_object+0x148/0x2a0 [] kmemleak_alloc+0x80/0xbc [] kmem_cache_alloc_trace+0x120/0x1ac [] hub_probe+0x120/0xb84 [] usb_probe_interface+0x1ec/0x298 [] driver_probe_device+0x160/0x374 [] __device_attach+0x28/0x4c [] bus_for_each_drv+0x78/0xac [] device_attach+0x6c/0x9c [] bus_probe_device+0x28/0xa0 [] device_add+0x324/0x604 [] usb_set_configuration+0x660/0x6cc [] generic_probe+0x44/0x84 [] usb_probe_device+0x54/0x74 [] driver_probe_device+0x160/0x374 [] __device_attach+0x28/0x4c Deadlocks: If the hub gets disconnected early enough (i.e. before INIT2/INIT3 are finished and the init_work is still queued), the core may call hub_quiesce() after acquiring interface device locks and it will wait for the work to be cancelled synchronously. But if the work handler is already running in parallel, it may try to acquire the same interface device lock and this may result in deadlock. Fix both the issues by removing the call to cancel_delayed_work_sync(). CC: #4.4+ Fixes: e50293ef9775 ("USB: fix invalid memory access in hub_activate()") Reported-by: Manu Gautam Signed-off-by: Viresh Kumar Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index bee13517676f..3ccffac0f647 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1315,8 +1315,6 @@ static void hub_quiesce(struct usb_hub *hub, enum hub_quiescing_type type) struct usb_device *hdev = hub->hdev; int i; - cancel_delayed_work_sync(&hub->init_work); - /* hub_wq and related activity won't re-trigger */ hub->quiescing = 1; -- cgit v1.2.3 From ca5cbc8b02f9b21cc8cd1ab36668763ec34f9ee8 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 5 Aug 2016 11:49:45 -0400 Subject: USB: hub: fix up early-exit pathway in hub_activate The early-exit pathway in hub_activate, added by commit e50293ef9775 ("USB: fix invalid memory access in hub_activate()") needs improvement. It duplicates code that is already present at the end of the subroutine, and it neglects to undo the effect of a usb_autopm_get_interface_no_resume() call. This patch fixes both problems by making the early-exit pathway jump directly to the end of the subroutine. It simplifies the code at the end by merging two conditionals that actually test the same condition although they appear different: If type < HUB_INIT3 then type must be either HUB_INIT2 or HUB_INIT, and it can't be HUB_INIT because in that case the subroutine would have exited earlier. Signed-off-by: Alan Stern CC: #4.4+ Reviewed-by: Viresh Kumar Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 3ccffac0f647..bb69d262b6f9 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1055,11 +1055,8 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) device_lock(hub->intfdev); /* Was the hub disconnected while we were waiting? */ - if (hub->disconnected) { - device_unlock(hub->intfdev); - kref_put(&hub->kref, hub_release); - return; - } + if (hub->disconnected) + goto disconnected; if (type == HUB_INIT2) goto init2; goto init3; @@ -1281,12 +1278,12 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) /* Scan all ports that need attention */ kick_hub_wq(hub); - /* Allow autosuspend if it was suppressed */ - if (type <= HUB_INIT3) + if (type == HUB_INIT2 || type == HUB_INIT3) { + /* Allow autosuspend if it was suppressed */ + disconnected: usb_autopm_put_interface_async(to_usb_interface(hub->intfdev)); - - if (type == HUB_INIT2 || type == HUB_INIT3) device_unlock(hub->intfdev); + } kref_put(&hub->kref, hub_release); } -- cgit v1.2.3 From 07d316a22e119fa301fd7dba7f1e1adfd4f72c05 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 5 Aug 2016 11:51:30 -0400 Subject: USB: hub: change the locking in hub_activate The locking in hub_activate() is not adequate to provide full mutual exclusion with hub_quiesce(). The subroutine locks the hub's usb_interface, but the callers of hub_quiesce() (such as hub_pre_reset() and hub_event()) hold the lock to the hub's usb_device. This patch changes hub_activate() to make it acquire the same lock as those other routines. Signed-off-by: Alan Stern CC: #4.4+ Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index bb69d262b6f9..1d5fc32d06d0 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1052,7 +1052,7 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) /* Continue a partial initialization */ if (type == HUB_INIT2 || type == HUB_INIT3) { - device_lock(hub->intfdev); + device_lock(&hdev->dev); /* Was the hub disconnected while we were waiting? */ if (hub->disconnected) @@ -1259,7 +1259,7 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) queue_delayed_work(system_power_efficient_wq, &hub->init_work, msecs_to_jiffies(delay)); - device_unlock(hub->intfdev); + device_unlock(&hdev->dev); return; /* Continues at init3: below */ } else { msleep(delay); @@ -1282,7 +1282,7 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) /* Allow autosuspend if it was suppressed */ disconnected: usb_autopm_put_interface_async(to_usb_interface(hub->intfdev)); - device_unlock(hub->intfdev); + device_unlock(&hdev->dev); } kref_put(&hub->kref, hub_release); -- cgit v1.2.3 From 28324936f3d672bbf83472fece8f36a158a52276 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Tue, 26 Jul 2016 16:01:30 +0800 Subject: usb: misc: usbtest: usbtest_do_ioctl may return positive integer For case 14 and case 21, their correct return value is the number of bytes transferred, so it is a positive integer. But in usbtest_ioctl, it takes non-zero as false return value for usbtest_do_ioctl, so it will treat the correct test as wrong test, then the time on tests will be the minus value. Signed-off-by: Peter Chen Cc: stable Fixes: 18fc4ebdc705 ("usb: misc: usbtest: Remove timeval usage") Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/usbtest.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index 6b978f04b8d7..5e3464e8d4e5 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -2602,7 +2602,7 @@ usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf) ktime_get_ts64(&start); retval = usbtest_do_ioctl(intf, param_32); - if (retval) + if (retval < 0) goto free_mutex; ktime_get_ts64(&end); -- cgit v1.2.3 From 9c6256a5e707a9eb8b91962b550050b13aa75334 Mon Sep 17 00:00:00 2001 From: Xiao Han Date: Tue, 14 Jun 2016 16:22:54 +0200 Subject: usb: misc: ftdi-elan: Fix off-by-one memory corruptions This patch fixes fives off-by-one bugs in the ftdi-elan driver code. The bug can be triggered by plugging a USB adapter for CardBus 3G cards (model U132 manufactured by Elan Digital Systems, Ltd), causing a kernel panic. The fix was tested on Ubuntu 14.04.4 with 4.7.0-rc14.2.0-27-generic+ and 4.4.0-22-generic+ kernel. In the ftdi_elan_synchronize function, an off-by-one memory corruption occurs when packet_bytes is equal or bigger than m. After having read m bytes, that is bytes_read is equal to m, " ..\x00" is still copied to the stack variable causing an out bounds write of 4 bytes, which overwrites the stack canary and results in a kernel panic. This off-by-one requires physical access to the machine. It is not exploitable since we have no control on the overwritten data. Similar off-by-one bugs have been observed in 4 other functions: ftdi_elan_stuck_waiting, ftdi_elan_read, ftdi_elan_edset_output and ftdi_elan_flush_input_fifo. Reported-by: Alex Palesandro Signed-off-by: Xiao Han Tested-by: Paul Chaignon Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/ftdi-elan.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c index 52c27cab78c3..9b5b3b2281ca 100644 --- a/drivers/usb/misc/ftdi-elan.c +++ b/drivers/usb/misc/ftdi-elan.c @@ -665,7 +665,7 @@ static ssize_t ftdi_elan_read(struct file *file, char __user *buffer, { char data[30 *3 + 4]; char *d = data; - int m = (sizeof(data) - 1) / 3; + int m = (sizeof(data) - 1) / 3 - 1; int bytes_read = 0; int retry_on_empty = 10; int retry_on_timeout = 5; @@ -1684,7 +1684,7 @@ wait:if (ftdi->disconnected > 0) { int i = 0; char data[30 *3 + 4]; char *d = data; - int m = (sizeof(data) - 1) / 3; + int m = (sizeof(data) - 1) / 3 - 1; int l = 0; struct u132_target *target = &ftdi->target[ed]; struct u132_command *command = &ftdi->command[ @@ -1876,7 +1876,7 @@ more:{ if (packet_bytes > 2) { char diag[30 *3 + 4]; char *d = diag; - int m = (sizeof(diag) - 1) / 3; + int m = (sizeof(diag) - 1) / 3 - 1; char *b = ftdi->bulk_in_buffer; int bytes_read = 0; diag[0] = 0; @@ -2053,7 +2053,7 @@ static int ftdi_elan_synchronize(struct usb_ftdi *ftdi) if (packet_bytes > 2) { char diag[30 *3 + 4]; char *d = diag; - int m = (sizeof(diag) - 1) / 3; + int m = (sizeof(diag) - 1) / 3 - 1; char *b = ftdi->bulk_in_buffer; int bytes_read = 0; unsigned char c = 0; @@ -2155,7 +2155,7 @@ more:{ if (packet_bytes > 2) { char diag[30 *3 + 4]; char *d = diag; - int m = (sizeof(diag) - 1) / 3; + int m = (sizeof(diag) - 1) / 3 - 1; char *b = ftdi->bulk_in_buffer; int bytes_read = 0; diag[0] = 0; -- cgit v1.2.3 From aed9d65ac3278d4febd8665bd7db59ef53e825fe Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 1 Aug 2016 15:25:56 -0400 Subject: USB: validate wMaxPacketValue entries in endpoint descriptors Erroneous or malicious endpoint descriptors may have non-zero bits in reserved positions, or out-of-bounds values. This patch helps prevent these from causing problems by bounds-checking the wMaxPacketValue entries in endpoint descriptors and capping the values at the maximum allowed. This issue was first discovered and tests were conducted by Jake Lamberson , an intern working for Rosie Hall. Signed-off-by: Alan Stern Reported-by: roswest Tested-by: roswest CC: Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/config.c | 66 ++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 63 insertions(+), 3 deletions(-) diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index 31ccdccd7a04..051163189810 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -171,6 +171,31 @@ static void usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno, ep, buffer, size); } +static const unsigned short low_speed_maxpacket_maxes[4] = { + [USB_ENDPOINT_XFER_CONTROL] = 8, + [USB_ENDPOINT_XFER_ISOC] = 0, + [USB_ENDPOINT_XFER_BULK] = 0, + [USB_ENDPOINT_XFER_INT] = 8, +}; +static const unsigned short full_speed_maxpacket_maxes[4] = { + [USB_ENDPOINT_XFER_CONTROL] = 64, + [USB_ENDPOINT_XFER_ISOC] = 1023, + [USB_ENDPOINT_XFER_BULK] = 64, + [USB_ENDPOINT_XFER_INT] = 64, +}; +static const unsigned short high_speed_maxpacket_maxes[4] = { + [USB_ENDPOINT_XFER_CONTROL] = 64, + [USB_ENDPOINT_XFER_ISOC] = 1024, + [USB_ENDPOINT_XFER_BULK] = 512, + [USB_ENDPOINT_XFER_INT] = 1023, +}; +static const unsigned short super_speed_maxpacket_maxes[4] = { + [USB_ENDPOINT_XFER_CONTROL] = 512, + [USB_ENDPOINT_XFER_ISOC] = 1024, + [USB_ENDPOINT_XFER_BULK] = 1024, + [USB_ENDPOINT_XFER_INT] = 1024, +}; + static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum, int asnum, struct usb_host_interface *ifp, int num_ep, unsigned char *buffer, int size) @@ -179,6 +204,8 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum, struct usb_endpoint_descriptor *d; struct usb_host_endpoint *endpoint; int n, i, j, retval; + unsigned int maxp; + const unsigned short *maxpacket_maxes; d = (struct usb_endpoint_descriptor *) buffer; buffer += d->bLength; @@ -286,6 +313,42 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum, endpoint->desc.wMaxPacketSize = cpu_to_le16(8); } + /* Validate the wMaxPacketSize field */ + maxp = usb_endpoint_maxp(&endpoint->desc); + + /* Find the highest legal maxpacket size for this endpoint */ + i = 0; /* additional transactions per microframe */ + switch (to_usb_device(ddev)->speed) { + case USB_SPEED_LOW: + maxpacket_maxes = low_speed_maxpacket_maxes; + break; + case USB_SPEED_FULL: + maxpacket_maxes = full_speed_maxpacket_maxes; + break; + case USB_SPEED_HIGH: + /* Bits 12..11 are allowed only for HS periodic endpoints */ + if (usb_endpoint_xfer_int(d) || usb_endpoint_xfer_isoc(d)) { + i = maxp & (BIT(12) | BIT(11)); + maxp &= ~i; + } + /* fallthrough */ + default: + maxpacket_maxes = high_speed_maxpacket_maxes; + break; + case USB_SPEED_SUPER: + case USB_SPEED_SUPER_PLUS: + maxpacket_maxes = super_speed_maxpacket_maxes; + break; + } + j = maxpacket_maxes[usb_endpoint_type(&endpoint->desc)]; + + if (maxp > j) { + dev_warn(ddev, "config %d interface %d altsetting %d endpoint 0x%X has invalid maxpacket %d, setting to %d\n", + cfgno, inum, asnum, d->bEndpointAddress, maxp, j); + maxp = j; + endpoint->desc.wMaxPacketSize = cpu_to_le16(i | maxp); + } + /* * Some buggy high speed devices have bulk endpoints using * maxpacket sizes other than 512. High speed HCDs may not @@ -293,9 +356,6 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum, */ if (to_usb_device(ddev)->speed == USB_SPEED_HIGH && usb_endpoint_xfer_bulk(d)) { - unsigned maxp; - - maxp = usb_endpoint_maxp(&endpoint->desc) & 0x07ff; if (maxp != 512) dev_warn(ddev, "config %d interface %d altsetting %d " "bulk endpoint 0x%X has invalid maxpacket %d\n", -- cgit v1.2.3 From bc337b51508beb2d039aff5074a76cfe1c212030 Mon Sep 17 00:00:00 2001 From: Marc Ohlf Date: Wed, 3 Aug 2016 11:51:54 +0200 Subject: usb: ehci: change order of register cleanup during shutdown In ehci_turn_off_all_ports() all EHCI port registers are cleared to zero. On some hardware, this can lead to an system hang, when ehci_port_power() accesses the already cleared registers. This patch changes the order of cleanup. First call ehci_port_power() which respects the current bits in port status registers and afterwards cleanup the hard way by setting everything to zero. Signed-off-by: Marc Ohlf Acked-by: Alan Stern CC: Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hcd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index a962b89b65a6..1e5f529d51a2 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -332,11 +332,11 @@ static void ehci_turn_off_all_ports(struct ehci_hcd *ehci) int port = HCS_N_PORTS(ehci->hcs_params); while (port--) { - ehci_writel(ehci, PORT_RWC_BITS, - &ehci->regs->port_status[port]); spin_unlock_irq(&ehci->lock); ehci_port_power(ehci, port, false); spin_lock_irq(&ehci->lock); + ehci_writel(ehci, PORT_RWC_BITS, + &ehci->regs->port_status[port]); } } -- cgit v1.2.3 From 70f7ca9a0262784d0b80727860a63d64ab228e7b Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 15 Jun 2016 15:56:11 +0200 Subject: usb: devio, do not warn when allocation fails usbdev_mmap allocates a buffer. The size of the buffer is determined by a user. So with this code (no need to be root): int fd = open("/dev/bus/usb/001/001", O_RDONLY); mmap(NULL, 0x800000, PROT_READ, MAP_SHARED, fd, 0); we can see a warning: WARNING: CPU: 0 PID: 21771 at ../mm/page_alloc.c:3563 __alloc_pages_slowpath+0x1036/0x16e0() ... Call Trace: [] ? warn_slowpath_null+0x2e/0x40 [] ? __alloc_pages_slowpath+0x1036/0x16e0 [] ? warn_alloc_failed+0x250/0x250 [] ? get_page_from_freelist+0x75b/0x28b0 [] ? __alloc_pages_nodemask+0x583/0x6b0 [] ? __alloc_pages_slowpath+0x16e0/0x16e0 [] ? dma_generic_alloc_coherent+0x104/0x220 [] ? hcd_buffer_alloc+0x1d6/0x3e0 [usbcore] [] ? hcd_buffer_destroy+0xa0/0xa0 [usbcore] [] ? usb_alloc_coherent+0x65/0x90 [usbcore] [] ? usbdev_mmap+0x1a5/0x770 [usbcore] ... Allocations like this one should be marked as __GFP_NOWARN. So do so. The size could be also clipped by something like: if (size >= (1 << (MAX_ORDER + PAGE_SHIFT - 1))) return -ENOMEM; But I think the overall limit of 16M (by usbfs_increase_memory_usage) is enough, so that we only silence the warning here. Signed-off-by: Jiri Slaby Cc: Greg Kroah-Hartman Cc: Alan Stern Cc: Steinar H. Gunderson Cc: Markus Rechberger Fixes: f7d34b445a (USB: Add support for usbfs zerocopy.) Cc: 4.6+ Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/devio.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index e9f5043a2167..472cbcdf7456 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -241,7 +241,8 @@ static int usbdev_mmap(struct file *file, struct vm_area_struct *vma) goto error_decrease_mem; } - mem = usb_alloc_coherent(ps->dev, size, GFP_USER, &dma_handle); + mem = usb_alloc_coherent(ps->dev, size, GFP_USER | __GFP_NOWARN, + &dma_handle); if (!mem) { ret = -ENOMEM; goto error_free_usbm; -- cgit v1.2.3 From 5cce438298a0d2a7a857a4a3c3e26aeb8f77b941 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 10 Jun 2016 14:42:55 -0400 Subject: USB: remove race condition in usbfs/libusb when using reap-after-disconnect Hans de Goede has reported a difficulty in the Linux port of libusb. When a device is removed, the poll() system call in usbfs starts returning POLLERR as soon as udev->state is set to USB_STATE_NOTATTACHED, but the outstanding URBs are not available for reaping until some time later (after usbdev_remove() has been called). This is awkward for libusb or other usbfs clients, although not an insuperable problem. At any rate, it's easy to change usbfs so that it returns POLLHUP as soon as the state becomes USB_STATE_NOTATTACHED but it doesn't return POLLERR until after the outstanding URBs have completed. That's what this patch does; it uses the fact that ps->list is always on the dev->filelist list until usbdev_remove() takes it off, which happens after all the outstanding URBs have been cancelled. Signed-off-by: Alan Stern Reported-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/devio.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 472cbcdf7456..e6a6d67c8705 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -2583,7 +2583,9 @@ static unsigned int usbdev_poll(struct file *file, if (file->f_mode & FMODE_WRITE && !list_empty(&ps->async_completed)) mask |= POLLOUT | POLLWRNORM; if (!connected(ps)) - mask |= POLLERR | POLLHUP; + mask |= POLLHUP; + if (list_empty(&ps->list)) + mask |= POLLERR; return mask; } -- cgit v1.2.3 From 59b71f774fc2ec2d985251e72fde0f9f88164547 Mon Sep 17 00:00:00 2001 From: Jaewon Kim Date: Thu, 21 Jul 2016 22:20:53 +0900 Subject: usb: host: max3421-hcd: fix mask of IO control register GPIO control register is divided into IOPINS1 and IOPINS2. And low 4-bit of register is controls output. So, this patch fixes wrong mask of GPIO output. Signed-off-by: Jaewon Kim Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/max3421-hcd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/max3421-hcd.c b/drivers/usb/host/max3421-hcd.c index c369c29e496d..2f7690092a7f 100644 --- a/drivers/usb/host/max3421-hcd.c +++ b/drivers/usb/host/max3421-hcd.c @@ -1675,7 +1675,7 @@ max3421_gpout_set_value(struct usb_hcd *hcd, u8 pin_number, u8 value) if (pin_number > 7) return; - mask = 1u << pin_number; + mask = 1u << (pin_number % 4); idx = pin_number / 4; if (value) -- cgit v1.2.3 From fd837b08d98c0c9f4f31998f2ed55b9d8694082c Mon Sep 17 00:00:00 2001 From: Andre Przywara Date: Mon, 8 Aug 2016 17:29:28 +0100 Subject: KVM: arm64: ITS: return 1 on successful MSI injection According to the KVM API documentation a successful MSI injection should return a value > 0 on success. Return possible errors in vgic_its_trigger_msi() and report a successful injection back to userland, while also reporting the case where the MSI could not be delivered due to the guest not having the LPI mapped, for instance. Signed-off-by: Andre Przywara Reviewed-by: Eric Auger Reviewed-by: Christoffer Dall Signed-off-by: Christoffer Dall --- include/linux/irqchip/arm-gic-v3.h | 1 + virt/kvm/arm/vgic/vgic-its.c | 56 +++++++++++++++++++++++++------------- 2 files changed, 38 insertions(+), 19 deletions(-) diff --git a/include/linux/irqchip/arm-gic-v3.h b/include/linux/irqchip/arm-gic-v3.h index 56b0b7ec66aa..99ac022edc60 100644 --- a/include/linux/irqchip/arm-gic-v3.h +++ b/include/linux/irqchip/arm-gic-v3.h @@ -337,6 +337,7 @@ */ #define E_ITS_MOVI_UNMAPPED_INTERRUPT 0x010107 #define E_ITS_MOVI_UNMAPPED_COLLECTION 0x010109 +#define E_ITS_INT_UNMAPPED_INTERRUPT 0x010307 #define E_ITS_CLEAR_UNMAPPED_INTERRUPT 0x010507 #define E_ITS_MAPD_DEVICE_OOR 0x010801 #define E_ITS_MAPC_PROCNUM_OOR 0x010902 diff --git a/virt/kvm/arm/vgic/vgic-its.c b/virt/kvm/arm/vgic/vgic-its.c index 07411cf967b9..1bd8adbeae26 100644 --- a/virt/kvm/arm/vgic/vgic-its.c +++ b/virt/kvm/arm/vgic/vgic-its.c @@ -441,39 +441,48 @@ static unsigned long vgic_mmio_read_its_idregs(struct kvm *kvm, * Find the target VCPU and the LPI number for a given devid/eventid pair * and make this IRQ pending, possibly injecting it. * Must be called with the its_lock mutex held. + * Returns 0 on success, a positive error value for any ITS mapping + * related errors and negative error values for generic errors. */ -static void vgic_its_trigger_msi(struct kvm *kvm, struct vgic_its *its, - u32 devid, u32 eventid) +static int vgic_its_trigger_msi(struct kvm *kvm, struct vgic_its *its, + u32 devid, u32 eventid) { + struct kvm_vcpu *vcpu; struct its_itte *itte; if (!its->enabled) - return; + return -EBUSY; itte = find_itte(its, devid, eventid); - /* Triggering an unmapped IRQ gets silently dropped. */ - if (itte && its_is_collection_mapped(itte->collection)) { - struct kvm_vcpu *vcpu; - - vcpu = kvm_get_vcpu(kvm, itte->collection->target_addr); - if (vcpu && vcpu->arch.vgic_cpu.lpis_enabled) { - spin_lock(&itte->irq->irq_lock); - itte->irq->pending = true; - vgic_queue_irq_unlock(kvm, itte->irq); - } - } + if (!itte || !its_is_collection_mapped(itte->collection)) + return E_ITS_INT_UNMAPPED_INTERRUPT; + + vcpu = kvm_get_vcpu(kvm, itte->collection->target_addr); + if (!vcpu) + return E_ITS_INT_UNMAPPED_INTERRUPT; + + if (!vcpu->arch.vgic_cpu.lpis_enabled) + return -EBUSY; + + spin_lock(&itte->irq->irq_lock); + itte->irq->pending = true; + vgic_queue_irq_unlock(kvm, itte->irq); + + return 0; } /* * Queries the KVM IO bus framework to get the ITS pointer from the given * doorbell address. * We then call vgic_its_trigger_msi() with the decoded data. + * According to the KVM_SIGNAL_MSI API description returns 1 on success. */ int vgic_its_inject_msi(struct kvm *kvm, struct kvm_msi *msi) { u64 address; struct kvm_io_device *kvm_io_dev; struct vgic_io_device *iodev; + int ret; if (!vgic_has_its(kvm)) return -ENODEV; @@ -490,10 +499,21 @@ int vgic_its_inject_msi(struct kvm *kvm, struct kvm_msi *msi) iodev = container_of(kvm_io_dev, struct vgic_io_device, dev); mutex_lock(&iodev->its->its_lock); - vgic_its_trigger_msi(kvm, iodev->its, msi->devid, msi->data); + ret = vgic_its_trigger_msi(kvm, iodev->its, msi->devid, msi->data); mutex_unlock(&iodev->its->its_lock); - return 0; + if (ret < 0) + return ret; + + /* + * KVM_SIGNAL_MSI demands a return value > 0 for success and 0 + * if the guest has blocked the MSI. So we map any LPI mapping + * related error to that. + */ + if (ret) + return 0; + else + return 1; } /* Requires the its_lock to be held. */ @@ -981,9 +1001,7 @@ static int vgic_its_cmd_handle_int(struct kvm *kvm, struct vgic_its *its, u32 msi_data = its_cmd_get_id(its_cmd); u64 msi_devid = its_cmd_get_deviceid(its_cmd); - vgic_its_trigger_msi(kvm, its, msi_devid, msi_data); - - return 0; + return vgic_its_trigger_msi(kvm, its, msi_devid, msi_data); } /* -- cgit v1.2.3 From 8b078c603249239f597dc395ac182667c8e0af9c Mon Sep 17 00:00:00 2001 From: Mathias Koehrer Date: Tue, 9 Aug 2016 10:33:31 +0200 Subject: PCI: Update "pci=resource_alignment" documentation Some uio based PCI drivers, e.g., uio_cif, do not work if the assigned PCI memory resources are not page aligned. By using the kernel option "pci=resource_alignment=@:." it is possible to request page alignment for memory resources of devices. However, this is cumbersome when using several devices, and the bus/slot/func addresses may change if devices are added to or removed from the system. Extend the "pci=resource_alignment" option so we can specify the relevant devices via PCI vendor, device, subvendor, and subdevice IDs. The specification of the devices via IDs is indicated by a leading string "pci:" as argument to "pci=resource_alignment". The format of the specification is pci::[::] Examples: pci=resource_alignment=4096@pci:8086:9c22:103c:198f pci=resource_alignment=pci:8086:9c22 # defaults to PAGE_SIZE align [bhelgaas: changelog, use actual vendor/device IDs in examples] Signed-off-by: Mathias Koehrer Signed-off-by: Bjorn Helgaas --- Documentation/kernel-parameters.txt | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 46c030a49186..a4f4d693e2c1 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -3032,6 +3032,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted. PAGE_SIZE is used as alignment. PCI-PCI bridge can be specified, if resource windows need to be expanded. + To specify the alignment for several + instances of a device, the PCI vendor, + device, subvendor, and subdevice may be + specified, e.g., 4096@pci:8086:9c22:103c:198f ecrc= Enable/disable PCIe ECRC (transaction layer end-to-end CRC checking). bios: Use BIOS/firmware settings. This is the -- cgit v1.2.3 From beab47d55b883e85bec7771a899ac791c6f92c80 Mon Sep 17 00:00:00 2001 From: Markus Elfring Date: Tue, 19 Jul 2016 22:42:22 +0200 Subject: of: Delete an unnecessary check before the function call "of_node_put" The of_node_put() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring Signed-off-by: Rob Herring --- drivers/of/base.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/of/base.c b/drivers/of/base.c index 7792266db259..cb255a07baa0 100644 --- a/drivers/of/base.c +++ b/drivers/of/base.c @@ -1631,8 +1631,7 @@ static int __of_parse_phandle_with_args(const struct device_node *np, */ err: - if (it.node) - of_node_put(it.node); + of_node_put(it.node); return rc; } -- cgit v1.2.3 From 89c67752ae4dedc1244344b266c837ddb4053ebd Mon Sep 17 00:00:00 2001 From: Gavin Shan Date: Mon, 1 Aug 2016 17:17:53 +1000 Subject: drivers/of: Validate device node in __unflatten_device_tree() @mynodes is set to NULL when __unflatten_device_tree() is called to unflatten device sub-tree in PCI hot add scenario on PowerPC PowerNV platform. Marking @mynodes detached unconditionally causes kernel crash as below backtrace shows: Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xc000000000b26f64 cpu 0x0: Vector: 300 (Data Access) at [c000003fcc7cf740] pc: c000000000b26f64: __unflatten_device_tree+0xf4/0x190 lr: c000000000b26f40: __unflatten_device_tree+0xd0/0x190 sp: c000003fcc7cf9c0 msr: 900000000280b033 dar: 0 dsisr: 40000000 current = 0xc000003fcc281680 paca = 0xc00000000ff00000 softe: 0 irq_happened: 0x01 pid = 2724, comm = sh Linux version 4.7.0-gavin-07754-g92a6836 (gwshan@gwshan) (gcc version \ 4.9.3 (Buildroot 2016.02-rc2-00093-g5ea3bce) ) #539 SMP Mon Aug 1 \ 12:40:29 AEST 2016 enter ? for help [c000003fcc7cfa50] c000000000b27060 of_fdt_unflatten_tree+0x60/0x90 [c000003fcc7cfaa0] c0000000004c6288 pnv_php_set_slot_power_state+0x118/0x440 [c000003fcc7cfb80] c0000000004c6a10 pnv_php_enable+0xc0/0x170 [c000003fcc7cfbd0] c0000000004c4d80 power_write_file+0xa0/0x190 [c000003fcc7cfc50] c0000000004be93c pci_slot_attr_store+0x3c/0x60 [c000003fcc7cfc70] c0000000002d3fd4 sysfs_kf_write+0x94/0xc0 [c000003fcc7cfcb0] c0000000002d2c30 kernfs_fop_write+0x180/0x260 [c000003fcc7cfd00] c000000000230fe0 __vfs_write+0x40/0x190 [c000003fcc7cfd90] c000000000232278 vfs_write+0xc8/0x240 [c000003fcc7cfde0] c000000000233d90 SyS_write+0x60/0x110 [c000003fcc7cfe30] c000000000009524 system_call+0x38/0x108 This avoids the kernel crash by marking @mynodes detached only when @mynodes is dereferencing valid device node in __unflatten_device_tree(). Fixes: 1d1bde550ea3 ("of: fdt: mark unflattened tree as detached") Reported-by: Meng Li Signed-off-by: Gavin Shan Signed-off-by: Rob Herring --- drivers/of/fdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c index 55f1b8391149..085c6389afd1 100644 --- a/drivers/of/fdt.c +++ b/drivers/of/fdt.c @@ -517,7 +517,7 @@ static void *__unflatten_device_tree(const void *blob, pr_warning("End of tree marker overwritten: %08x\n", be32_to_cpup(mem + size)); - if (detached) { + if (detached && mynodes) { of_node_set_flag(*mynodes, OF_DETACHED); pr_debug("unflattened tree is detached\n"); } -- cgit v1.2.3 From e55aeb6ba4e8cc3549bff1e75ea1d029324bce21 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Tue, 9 Aug 2016 16:18:51 +0200 Subject: of/irq: Mark interrupt controllers as populated before initialisation That way the init callback may clear the flag again, in case of drivers split between early irq chip and a normal platform driver. Fixes: 15cc2ed6dcf9 ("of/irq: Mark initialised interrupt controllers as populated") Suggested-by: Rob Herring Signed-off-by: Philipp Zabel Acked-by: Jon Hunter Signed-off-by: Rob Herring --- drivers/of/irq.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/of/irq.c b/drivers/of/irq.c index 89a71c6074fc..a2e68f740eda 100644 --- a/drivers/of/irq.c +++ b/drivers/of/irq.c @@ -544,12 +544,15 @@ void __init of_irq_init(const struct of_device_id *matches) list_del(&desc->list); + of_node_set_flag(desc->dev, OF_POPULATED); + pr_debug("of_irq_init: init %s (%p), parent %p\n", desc->dev->full_name, desc->dev, desc->interrupt_parent); ret = desc->irq_init_cb(desc->dev, desc->interrupt_parent); if (ret) { + of_node_clear_flag(desc->dev, OF_POPULATED); kfree(desc); continue; } @@ -559,8 +562,6 @@ void __init of_irq_init(const struct of_device_id *matches) * its children can get processed in a subsequent pass. */ list_add_tail(&desc->list, &intc_parent_list); - - of_node_set_flag(desc->dev, OF_POPULATED); } /* Get the next pending parent that might have children */ -- cgit v1.2.3 From 255c0397bc402e3fcc8833c214f49b2108f04d1a Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Tue, 9 Aug 2016 16:18:52 +0200 Subject: ARM: imx6: mark GPC node as not populated after irq init to probe pm domain driver Since IRQCHIP_DECLARE now flags the GPC node as already populated, the GPC power domain driver is never probed unless we clear the flag again. Fixes: 15cc2ed6dcf9 ("of/irq: Mark initialised interrupt controllers as populated") Suggested-by: Rob Herring Signed-off-by: Philipp Zabel Cc: Jon Hunter Signed-off-by: Rob Herring --- arch/arm/mach-imx/gpc.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c index fd8720532471..0df062d8b2c9 100644 --- a/arch/arm/mach-imx/gpc.c +++ b/arch/arm/mach-imx/gpc.c @@ -271,6 +271,12 @@ static int __init imx_gpc_init(struct device_node *node, for (i = 0; i < IMR_NUM; i++) writel_relaxed(~0, gpc_base + GPC_IMR1 + i * 4); + /* + * Clear the OF_POPULATED flag set in of_irq_init so that + * later the GPC power domain driver will not be skipped. + */ + of_node_clear_flag(node, OF_POPULATED); + return 0; } IRQCHIP_DECLARE(imx_gpc, "fsl,imx6q-gpc", imx_gpc_init); -- cgit v1.2.3 From 64827adc9e14c8d17cf5f3d5a9ee47a42e95dd8c Mon Sep 17 00:00:00 2001 From: Chunming Zhou Date: Thu, 28 Jul 2016 17:20:32 +0800 Subject: drm/amdgpu: fix vm init error path Signed-off-by: Chunming Zhou Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c index 8e642fc48df4..80120fa4092c 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c @@ -1535,7 +1535,7 @@ int amdgpu_vm_init(struct amdgpu_device *adev, struct amdgpu_vm *vm) r = amd_sched_entity_init(&ring->sched, &vm->entity, rq, amdgpu_sched_jobs); if (r) - return r; + goto err; vm->page_directory_fence = NULL; @@ -1565,6 +1565,9 @@ error_free_page_directory: error_free_sched_entity: amd_sched_entity_fini(&ring->sched, &vm->entity); +err: + drm_free_large(vm->page_tables); + return r; } -- cgit v1.2.3 From b9a019899f61acca18df5fb5e38a8fcdfea86fcd Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Thu, 28 Jul 2016 19:38:07 +0100 Subject: ARM: 8590/1: sanity_check_meminfo(): avoid overflow on vmalloc_limit To limit the amount of mapped low memory, we determine a physical address boundary based on the start of the vmalloc area using __pa(). Strictly speaking, the vmalloc area location is arbitrary and does not necessarily corresponds to a valid physical address. For example, if PAGE_OFFSET = 0x80000000 PHYS_OFFSET = 0x90000000 vmalloc_min = 0xf0000000 then __pa(vmalloc_min) overflows and returns a wrapped 0 when phys_addr_t is a 32-bit type. Then the code that follows determines that the entire physical memory is above that boundary and no low memory gets mapped at all: |[...] |Machine model: Freescale i.MX51 NA04 Board |Ignoring RAM at 0x90000000-0xb0000000 (!CONFIG_HIGHMEM) |Consider using a HIGHMEM enabled kernel. To avoid this problem let's make vmalloc_limit a 64-bit value all the time and determine that boundary explicitly without using __pa(). Reported-by: Emil Renner Berthing Signed-off-by: Nicolas Pitre Tested-by: Emil Renner Berthing Signed-off-by: Russell King --- arch/arm/mm/mmu.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 62f4d01941f7..12774c8e770c 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -1155,10 +1155,19 @@ void __init sanity_check_meminfo(void) { phys_addr_t memblock_limit = 0; int highmem = 0; - phys_addr_t vmalloc_limit = __pa(vmalloc_min - 1) + 1; + u64 vmalloc_limit; struct memblock_region *reg; bool should_use_highmem = false; + /* + * Let's use our own (unoptimized) equivalent of __pa() that is + * not affected by wrap-arounds when sizeof(phys_addr_t) == 4. + * The result is used as the upper bound on physical memory address + * and may itself be outside the valid range for which phys_addr_t + * and therefore __pa() is defined. + */ + vmalloc_limit = (u64)(uintptr_t)vmalloc_min - PAGE_OFFSET + PHYS_OFFSET; + for_each_memblock(memory, reg) { phys_addr_t block_start = reg->base; phys_addr_t block_end = reg->base + reg->size; @@ -1183,10 +1192,11 @@ void __init sanity_check_meminfo(void) if (reg->size > size_limit) { phys_addr_t overlap_size = reg->size - size_limit; - pr_notice("Truncating RAM at %pa-%pa to -%pa", - &block_start, &block_end, &vmalloc_limit); - memblock_remove(vmalloc_limit, overlap_size); + pr_notice("Truncating RAM at %pa-%pa", + &block_start, &block_end); block_end = vmalloc_limit; + pr_cont(" to -%pa", &block_end); + memblock_remove(vmalloc_limit, overlap_size); should_use_highmem = true; } } -- cgit v1.2.3 From 61444cde9170e256c238a02c9a4861930db04f5f Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Thu, 28 Jul 2016 19:48:44 +0100 Subject: ARM: 8591/1: mm: use fully constructed struct pages for EFI pgd allocations The late_alloc() PTE allocation function used by create_mapping_late() does not call pgtable_page_ctor() on PTE pages it allocates, leaving the per-page spinlock uninitialized. Since generic page table manipulation code may assume that translation table pages that are not owned by init_mm are covered by fully constructed struct pages, the following crash may occur with the new UEFI memory attributes table code. efi: memattr: Processing EFI Memory Attributes table: efi: memattr: 0x0000ffa16000-0x0000ffa82fff [Runtime Code |RUN| | |XP| | | | | | | | ] Unable to handle kernel NULL pointer dereference at virtual address 00000010 pgd = c0204000 [00000010] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.7.0-rc4-00063-g3882aa7b340b #361 Hardware name: Generic DT based system task: ed858000 ti: ed842000 task.ti: ed842000 PC is at __lock_acquire+0xa0/0x19a8 ... [] (__lock_acquire) from [] (lock_acquire+0x6c/0x88) [] (lock_acquire) from [] (_raw_spin_lock+0x2c/0x3c) [] (_raw_spin_lock) from [] (apply_to_page_range+0xe8/0x238) [] (apply_to_page_range) from [] (efi_set_mapping_permissions+0x54/0x5c) [] (efi_set_mapping_permissions) from [] (efi_memattr_apply_permissions+0x2b8/0x378) [] (efi_memattr_apply_permissions) from [] (arm_enable_runtime_services+0x1f0/0x22c) [] (arm_enable_runtime_services) from [] (do_one_initcall+0x44/0x174) [] (do_one_initcall) from [] (kernel_init_freeable+0x90/0x1e8) [] (kernel_init_freeable) from [] (kernel_init+0x8/0x114) [] (kernel_init) from [] (ret_from_fork+0x14/0x24) The crash is due to the fact that the UEFI page tables are not owned by init_mm, but are not covered by fully constructed struct pages. Given that the UEFI subsystem is currently the only user of create_mapping_late(), add an unconditional call to pgtable_page_ctor() to late_alloc(). Fixes: 9fc68b717c24 ("ARM/efi: Apply strict permissions for UEFI Runtime Services regions") Signed-off-by: Ard Biesheuvel Signed-off-by: Russell King --- arch/arm/mm/mmu.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 12774c8e770c..6344913f0804 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -728,7 +728,8 @@ static void *__init late_alloc(unsigned long sz) { void *ptr = (void *)__get_free_pages(PGALLOC_GFP, get_order(sz)); - BUG_ON(!ptr); + if (!ptr || !pgtable_page_ctor(virt_to_page(ptr))) + BUG(); return ptr; } -- cgit v1.2.3 From 87eed3c74d7c65556f744230a90bf9556dd29146 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 3 Aug 2016 10:33:35 +0100 Subject: ARM: fix address limit restoration for undefined instructions During boot, sometimes the kernel will test to see if an instruction causes an undefined instruction exception. Unfortunately, the exit path for these exceptions did not restore the address limit, which causes the rootfs mount code to fail. Fix the missing address limit restoration. Tested-by: Guenter Roeck Signed-off-by: Russell King --- arch/arm/kernel/entry-armv.S | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index bc5f50799d75..9f157e7c51e7 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -295,6 +295,7 @@ __und_svc_fault: bl __und_fault __und_svc_finish: + get_thread_info tsk ldr r5, [sp, #S_PSR] @ Get SVC cpsr svc_exit r5 @ return from exception UNWIND(.fnend ) -- cgit v1.2.3 From 99e5e886a0a59df267ff6838f763b789847df982 Mon Sep 17 00:00:00 2001 From: Christoffer Dall Date: Mon, 1 Aug 2016 20:25:33 +0200 Subject: KVM: arm64: vgic-its: Handle errors from vgic_add_lpi During low memory conditions, we could be dereferencing a NULL pointer when vgic_add_lpi fails to allocate memory. Consider for example this call sequence: vgic_its_cmd_handle_mapi itte->irq = vgic_add_lpi(kvm, lpi_nr); update_lpi_config(kvm, itte->irq, NULL); ret = kvm_read_guest(kvm, propbase + irq->intid ^^^^ kaboom? Instead, return an error pointer from vgic_add_lpi and check the return value from its single caller. Signed-off-by: Christoffer Dall --- virt/kvm/arm/vgic/vgic-its.c | 21 +++++++++++++++++---- 1 file changed, 17 insertions(+), 4 deletions(-) diff --git a/virt/kvm/arm/vgic/vgic-its.c b/virt/kvm/arm/vgic/vgic-its.c index 1bd8adbeae26..d06330abd5e8 100644 --- a/virt/kvm/arm/vgic/vgic-its.c +++ b/virt/kvm/arm/vgic/vgic-its.c @@ -51,7 +51,7 @@ static struct vgic_irq *vgic_add_lpi(struct kvm *kvm, u32 intid) irq = kzalloc(sizeof(struct vgic_irq), GFP_KERNEL); if (!irq) - return NULL; + return ERR_PTR(-ENOMEM); INIT_LIST_HEAD(&irq->lpi_list); INIT_LIST_HEAD(&irq->ap_list); @@ -522,7 +522,8 @@ static void its_free_itte(struct kvm *kvm, struct its_itte *itte) list_del(&itte->itte_list); /* This put matches the get in vgic_add_lpi. */ - vgic_put_irq(kvm, itte->irq); + if (itte->irq) + vgic_put_irq(kvm, itte->irq); kfree(itte); } @@ -713,10 +714,11 @@ static int vgic_its_cmd_handle_mapi(struct kvm *kvm, struct vgic_its *its, u32 device_id = its_cmd_get_deviceid(its_cmd); u32 event_id = its_cmd_get_id(its_cmd); u32 coll_id = its_cmd_get_collection(its_cmd); - struct its_itte *itte; + struct its_itte *itte, *new_itte = NULL; struct its_device *device; struct its_collection *collection, *new_coll = NULL; int lpi_nr; + struct vgic_irq *irq; device = find_its_device(its, device_id); if (!device) @@ -747,13 +749,24 @@ static int vgic_its_cmd_handle_mapi(struct kvm *kvm, struct vgic_its *its, return -ENOMEM; } + new_itte = itte; itte->event_id = event_id; list_add_tail(&itte->itte_list, &device->itt_head); } itte->collection = collection; itte->lpi = lpi_nr; - itte->irq = vgic_add_lpi(kvm, lpi_nr); + + irq = vgic_add_lpi(kvm, lpi_nr); + if (IS_ERR(irq)) { + if (new_coll) + vgic_its_free_collection(its, coll_id); + if (new_itte) + its_free_itte(kvm, new_itte); + return PTR_ERR(irq); + } + itte->irq = irq; + update_affinity_itte(kvm, itte); /* -- cgit v1.2.3 From 2cccbb368a2bf27d98cf36bb424fbbf5572c0fab Mon Sep 17 00:00:00 2001 From: Christoffer Dall Date: Tue, 2 Aug 2016 22:05:42 +0200 Subject: KVM: arm64: vgic-its: Plug race in vgic_put_irq Right now the following sequence of events can happen: 1. Thread X calls vgic_put_irq 2. Thread Y calls vgic_add_lpi 3. Thread Y gets lpi_list_lock 4. Thread X drops the ref count to 0 and blocks on lpi_list_lock 5. Thread Y finds the irq via the lpi_list_lock, raises the ref count to 1, and release the lpi_list_lock. 6. Thread X proceeds and frees the irq. Avoid this by holding the spinlock around the kref_put. Reviewed-by: Andre Przywara Signed-off-by: Christoffer Dall --- virt/kvm/arm/vgic/vgic.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/virt/kvm/arm/vgic/vgic.c b/virt/kvm/arm/vgic/vgic.c index e7aeac719e09..e83b7fe4baae 100644 --- a/virt/kvm/arm/vgic/vgic.c +++ b/virt/kvm/arm/vgic/vgic.c @@ -117,17 +117,17 @@ static void vgic_irq_release(struct kref *ref) void vgic_put_irq(struct kvm *kvm, struct vgic_irq *irq) { - struct vgic_dist *dist; + struct vgic_dist *dist = &kvm->arch.vgic; if (irq->intid < VGIC_MIN_LPI) return; - if (!kref_put(&irq->refcount, vgic_irq_release)) + spin_lock(&dist->lpi_list_lock); + if (!kref_put(&irq->refcount, vgic_irq_release)) { + spin_unlock(&dist->lpi_list_lock); return; + }; - dist = &kvm->arch.vgic; - - spin_lock(&dist->lpi_list_lock); list_del(&irq->lpi_list); dist->lpi_list_count--; spin_unlock(&dist->lpi_list_lock); -- cgit v1.2.3 From c7de573471832dff7d31f0c13b0f143d6f017799 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Fri, 29 Jul 2016 03:17:58 +0300 Subject: usb: dwc3: gadget: increment request->actual once When using SG lists, we would end up setting request->actual to: num_mapped_sgs * (request->length - count) Let's fix that up by incrementing request->actual only once. Cc: Reported-by: Brian E Rogers Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/gadget.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 8f8c2157910e..863c306ebb69 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2013,14 +2013,6 @@ static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep, s_pkt = 1; } - /* - * We assume here we will always receive the entire data block - * which we should receive. Meaning, if we program RX to - * receive 4K but we receive only 2K, we assume that's all we - * should receive and we simply bounce the request back to the - * gadget driver for further processing. - */ - req->request.actual += req->request.length - count; if (s_pkt) return 1; if ((event->status & DEPEVT_STATUS_LST) && @@ -2040,6 +2032,7 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep, struct dwc3_trb *trb; unsigned int slot; unsigned int i; + int count = 0; int ret; do { @@ -2054,6 +2047,8 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep, slot++; slot %= DWC3_TRB_NUM; trb = &dep->trb_pool[slot]; + count += trb->size & DWC3_TRB_SIZE_MASK; + ret = __dwc3_cleanup_done_trbs(dwc, dep, req, trb, event, status); @@ -2061,6 +2056,14 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep, break; } while (++i < req->request.num_mapped_sgs); + /* + * We assume here we will always receive the entire data block + * which we should receive. Meaning, if we program RX to + * receive 4K but we receive only 2K, we assume that's all we + * should receive and we simply bounce the request back to the + * gadget driver for further processing. + */ + req->request.actual += req->request.length - count; dwc3_gadget_giveback(dep, req, status); if (ret) -- cgit v1.2.3 From e5b36ae2f851024d43c76e51f395d32ce8d769ce Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 10 Aug 2016 11:13:26 +0300 Subject: usb: dwc3: gadget: fix for short pkts during chained xfers DWC3 has one interesting peculiarity with chained transfers. If we setup N chained transfers and we get a short packet before processing all N TRBs, DWC3 will (conditionally) issue a XferComplete or XferInProgress event and retire all TRBs from the one which got a short packet to the last without clearing their HWO bits. This means SW must clear HWO bit manually, which this patch is doing. Cc: Cc: Brian E Rogers Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/gadget.c | 23 ++++++++++++++++++++--- 1 file changed, 20 insertions(+), 3 deletions(-) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 863c306ebb69..241f5c7b34bf 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1955,7 +1955,8 @@ static void dwc3_gadget_free_endpoints(struct dwc3 *dwc) static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep, struct dwc3_request *req, struct dwc3_trb *trb, - const struct dwc3_event_depevt *event, int status) + const struct dwc3_event_depevt *event, int status, + int chain) { unsigned int count; unsigned int s_pkt = 0; @@ -1964,6 +1965,19 @@ static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep, dep->queued_requests--; trace_dwc3_complete_trb(dep, trb); + /* + * If we're in the middle of series of chained TRBs and we + * receive a short transfer along the way, DWC3 will skip + * through all TRBs including the last TRB in the chain (the + * where CHN bit is zero. DWC3 will also avoid clearing HWO + * bit and SW has to do it manually. + * + * We're going to do that here to avoid problems of HW trying + * to use bogus TRBs for transfers. + */ + if (chain && (trb->ctrl & DWC3_TRB_CTRL_HWO)) + trb->ctrl &= ~DWC3_TRB_CTRL_HWO; + if ((trb->ctrl & DWC3_TRB_CTRL_HWO) && status != -ESHUTDOWN) /* * We continue despite the error. There is not much we @@ -1975,6 +1989,7 @@ static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep, */ dev_err(dwc->dev, "%s's TRB (%p) still owned by HW\n", dep->name, trb); + count = trb->size & DWC3_TRB_SIZE_MASK; if (dep->direction) { @@ -2036,10 +2051,13 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep, int ret; do { + int chain; + req = next_request(&dep->started_list); if (WARN_ON_ONCE(!req)) return 1; + chain = req->request.num_mapped_sgs > 0; i = 0; do { slot = req->first_trb_index + i; @@ -2049,9 +2067,8 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep, trb = &dep->trb_pool[slot]; count += trb->size & DWC3_TRB_SIZE_MASK; - ret = __dwc3_cleanup_done_trbs(dwc, dep, req, trb, - event, status); + event, status, chain); if (ret) break; } while (++i < req->request.num_mapped_sgs); -- cgit v1.2.3 From 7c705dfe2ebe731c8fd068623b6b4df2d3512c08 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 10 Aug 2016 12:35:30 +0300 Subject: usb: dwc3: gadget: always cleanup all TRBs If we stop earlier due to short packet, we will not be able to giveback all TRBs. Cc: Cc: Brian E Rogers Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/gadget.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 241f5c7b34bf..eb820e4ab49d 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2028,7 +2028,7 @@ static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep, s_pkt = 1; } - if (s_pkt) + if (s_pkt && !chain) return 1; if ((event->status & DEPEVT_STATUS_LST) && (trb->ctrl & (DWC3_TRB_CTRL_LST | -- cgit v1.2.3 From 4491ed5042f0419b22a4b08331adb54af31e2caa Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Fri, 1 Apr 2016 17:13:11 +0300 Subject: usb: dwc3: pci: add Intel Kabylake PCI ID Intel Kabylake PCH has the same DWC3 than Intel Sunrisepoint. Add the new ID to the supported devices. Cc: Signed-off-by: Heikki Krogerus Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/dwc3-pci.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 45f5a232d9fb..2eb84d6c24a6 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -37,6 +37,7 @@ #define PCI_DEVICE_ID_INTEL_BXT 0x0aaa #define PCI_DEVICE_ID_INTEL_BXT_M 0x1aaa #define PCI_DEVICE_ID_INTEL_APL 0x5aaa +#define PCI_DEVICE_ID_INTEL_KBP 0xa2b0 static const struct acpi_gpio_params reset_gpios = { 0, 0, false }; static const struct acpi_gpio_params cs_gpios = { 1, 0, false }; @@ -227,6 +228,7 @@ static const struct pci_device_id dwc3_pci_id_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BXT), }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BXT_M), }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_APL), }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_KBP), }, { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB), }, { } /* Terminating Entry */ }; -- cgit v1.2.3 From 6f4deb18a505523eb7925d646574a95f9e982ff7 Mon Sep 17 00:00:00 2001 From: Christophe Leroy Date: Mon, 8 Aug 2016 15:58:56 +0200 Subject: gpio: max730x: set gpiochip data pointer before using it gpiochip_add_data() has to be called before calling max7301_direction_input() [ 4.389883] Unable to handle kernel paging request for data at address 0x00000018 [ 4.397282] Faulting instruction address: 0xc01a8cbc [ 4.402023] Oops: Kernel access of bad area, sig: 11 [#1] [ 4.407331] PREEMPT CMPC885 [ 4.410131] CPU: 0 PID: 6 Comm: kworker/u2:0 Not tainted 4.5.0-gacdfdee #39 [ 4.418592] Workqueue: deferwq deferred_probe_work_func [ 4.423711] task: c60798b0 ti: c608a000 task.ti: c608a000 [ 4.429038] NIP: c01a8cbc LR: c01a8e24 CTR: c01ff028 [ 4.433953] REGS: c608bad0 TRAP: 0300 Not tainted (4.5.0-s3k-dev-gacdfdee-svn-dirty) [ 4.441847] MSR: 00009032 CR: 33039553 XER: a000f940 [ 4.448395] DAR: 00000018 DSISR: c0000000 GPR00: c01a8e24 c608bb80 c60798b0 c60d6f6c 00000004 00000002 07de2900 00700000 GPR08: 00000000 00000000 c608a000 00001032 35039553 00000000 c002f37c c6010b64 GPR16: c6010a48 c6010a14 c6010a00 00000000 c0450000 c0453568 c0453438 c050db14 GPR24: c62662bc 00000009 ffffffaa c60d6f5d 00000001 00000000 00000000 00000000 [ 4.480371] NIP [c01a8cbc] max7301_direction_input+0x20/0x9c [ 4.485951] LR [c01a8e24] __max730x_probe+0xec/0x138 [ 4.490812] Call Trace: [ 4.493268] [c608bba0] [c01a8e24] __max730x_probe+0xec/0x138 [ 4.498878] [c608bbc0] [c01cc368] driver_probe_device+0x190/0x38c [ 4.504895] [c608bbf0] [c01ca918] bus_for_each_drv+0x58/0xb4 [ 4.510489] [c608bc20] [c01cc04c] __device_attach+0x8c/0x110 [ 4.516082] [c608bc50] [c01cab80] bus_probe_device+0x34/0xb8 [ 4.521673] [c608bc70] [c01c96c8] device_add+0x3c0/0x598 [ 4.526925] [c608bcb0] [c0200f90] spi_add_device+0x114/0x160 [ 4.532512] [c608bcd0] [c02018d0] spi_register_master+0x6e0/0x7c8 [ 4.538537] [c608bd20] [c02019fc] devm_spi_register_master+0x44/0x8c [ 4.544824] [c608bd40] [c0203854] of_fsl_spi_probe+0x458/0x57c [ 4.550587] [c608bda0] [c01cd828] platform_drv_probe+0x30/0x74 [ 4.556366] [c608bdb0] [c01cc368] driver_probe_device+0x190/0x38c [ 4.562383] [c608bde0] [c01ca918] bus_for_each_drv+0x58/0xb4 [ 4.567977] [c608be10] [c01cc04c] __device_attach+0x8c/0x110 [ 4.573572] [c608be40] [c01cab80] bus_probe_device+0x34/0xb8 [ 4.579170] [c608be60] [c01cb9b4] deferred_probe_work_func+0xa4/0xc4 [ 4.585438] [c608be80] [c0029c04] process_one_work+0x22c/0x414 [ 4.591201] [c608bea0] [c002a100] worker_thread+0x314/0x5c0 [ 4.596722] [c608bef0] [c002f444] kthread+0xc8/0xcc [ 4.601538] [c608bf40] [c000af84] ret_from_kernel_thread+0x5c/0x64 [ 4.607596] Instruction dump: [ 4.610530] 7c0803a6 bba10014 38210020 4e800020 7c0802a6 9421ffe0 38840004 bf810010 [ 4.618188] 90010024 549cf0be 83c30010 549d0f7c <813e0018> 7fc3f378 7d3f2430 57ff07fe [ 4.626041] ---[ end trace 303adb021dd4caf2 ]--- Cc: stable@vger.kernel.org fixes: 5e45e01916197 ("gpio: max730x: use gpiochip data pointer") Signed-off-by: Christophe Leroy Signed-off-by: Linus Walleij --- drivers/gpio/gpio-max730x.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/gpio/gpio-max730x.c b/drivers/gpio/gpio-max730x.c index 08807368f007..946d09195598 100644 --- a/drivers/gpio/gpio-max730x.c +++ b/drivers/gpio/gpio-max730x.c @@ -192,6 +192,10 @@ int __max730x_probe(struct max7301 *ts) ts->chip.parent = dev; ts->chip.owner = THIS_MODULE; + ret = gpiochip_add_data(&ts->chip, ts); + if (ret) + goto exit_destroy; + /* * initialize pullups according to platform data and cache the * register values for later use. @@ -213,10 +217,6 @@ int __max730x_probe(struct max7301 *ts) } } - ret = gpiochip_add_data(&ts->chip, ts); - if (ret) - goto exit_destroy; - return ret; exit_destroy: -- cgit v1.2.3 From b06bc7ec4da26dccda040a65896ea22ee6638a7a Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 13 Jul 2016 09:10:31 +0100 Subject: drm/i915: Flush GT idle status upon reset Upon resetting the GPU, we force the engines to be idle by clearing their request lists. However, I neglected to clear the GT active status and so the next request following the reset was not marking the device as busy again. (We had to wait until any outstanding retire worker finally ran and cleared the active status.) Fixes: 67d97da34917 ("drm/i915: Only start retire worker when idle") Testcase: igt/pm_rps/reset Signed-off-by: Chris Wilson Cc: Joonas Lahtinen Link: http://patchwork.freedesktop.org/patch/msgid/1468397438-21226-1-git-send-email-chris@chris-wilson.co.uk Reviewed-by: Joonas Lahtinen (cherry picked from commit b913b33c43db849778f044d4b9e74b167898a9bc) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_gem.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 11681501d7b1..27ef10e4923e 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -3169,6 +3169,8 @@ static void i915_gem_reset_engine_cleanup(struct intel_engine_cs *engine) } intel_ring_init_seqno(engine, engine->last_submitted_seqno); + + engine->i915->gt.active_engines &= ~intel_engine_flag(engine); } void i915_gem_reset(struct drm_device *dev) @@ -3186,6 +3188,7 @@ void i915_gem_reset(struct drm_device *dev) for_each_engine(engine, dev_priv) i915_gem_reset_engine_cleanup(engine); + mod_delayed_work(dev_priv->wq, &dev_priv->gt.idle_work, 0); i915_gem_context_reset(dev); -- cgit v1.2.3 From c2a4c5b75a717db8bbe1c2fad6473063a7d2f930 Mon Sep 17 00:00:00 2001 From: Jay Cornwall Date: Wed, 3 Aug 2016 13:39:42 -0500 Subject: drm/amdgpu: Fix memory trashing if UVD ring test fails MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit fence_put was called on an uninitialized variable. Reviewed-by: Christian Kƶnig Signed-off-by: Jay Cornwall Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c index b11f4e8868d7..4aa993d19018 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c @@ -1187,7 +1187,8 @@ int amdgpu_uvd_ring_test_ib(struct amdgpu_ring *ring, long timeout) r = 0; } -error: fence_put(fence); + +error: return r; } -- cgit v1.2.3 From 18b43e89d295cc65151c505c643c98fb2c320e59 Mon Sep 17 00:00:00 2001 From: Daniel Mentz Date: Thu, 4 Aug 2016 17:56:53 -0700 Subject: ARC: Call trace_hardirqs_on() before enabling irqs trace_hardirqs_on_caller() in lockdep.c expects to be called before, not after interrupts are actually enabled. The following comment in kernel/locking/lockdep.c substantiates this claim: " /* * We're enabling irqs and according to our state above irqs weren't * already enabled, yet we find the hardware thinks they are in fact * enabled.. someone messed up their IRQ state tracing. */ " An example can be found in include/linux/irqflags.h: do { trace_hardirqs_on(); raw_local_irq_enable(); } while (0) Without this change, we hit the following DEBUG_LOCKS_WARN_ON. [ 7.760000] ------------[ cut here ]------------ [ 7.760000] WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:2711 resume_user_mode_begin+0x48/0xf0 [ 7.770000] DEBUG_LOCKS_WARN_ON(!irqs_disabled()) [ 7.780000] Modules linked in: [ 7.780000] CPU: 0 PID: 1 Comm: init Not tainted 4.7.0-00003-gc668bb9-dirty #366 [ 7.790000] [ 7.790000] Stack Trace: [ 7.790000] arc_unwind_core.constprop.1+0xa4/0x118 [ 7.800000] warn_slowpath_fmt+0x72/0x158 [ 7.800000] resume_user_mode_begin+0x48/0xf0 [ 7.810000] ---[ end trace 6f6a7a8fae20d2f0 ]--- Signed-off-by: Daniel Mentz Cc: Signed-off-by: Vineet Gupta --- arch/arc/include/asm/irqflags-compact.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arc/include/asm/irqflags-compact.h b/arch/arc/include/asm/irqflags-compact.h index c1d36458bfb7..4c6eed80cd8b 100644 --- a/arch/arc/include/asm/irqflags-compact.h +++ b/arch/arc/include/asm/irqflags-compact.h @@ -188,10 +188,10 @@ static inline int arch_irqs_disabled(void) .endm .macro IRQ_ENABLE scratch + TRACE_ASM_IRQ_ENABLE lr \scratch, [status32] or \scratch, \scratch, (STATUS_E1_MASK | STATUS_E2_MASK) flag \scratch - TRACE_ASM_IRQ_ENABLE .endm #endif /* __ASSEMBLY__ */ -- cgit v1.2.3 From 45c3b08a117e2232fc8d7b9e849ead36386f4f96 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Mon, 13 Jun 2016 16:38:27 +0200 Subject: ARC: Elide redundant setup of DMA callbacks For resources shared by all cores such as SLC and IOC, only the master core needs to do any setups / enabling / disabling etc. Cc: Signed-off-by: Vineet Gupta --- arch/arc/mm/cache.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c index 5a294b2c3cb3..0b10efe3a6a7 100644 --- a/arch/arc/mm/cache.c +++ b/arch/arc/mm/cache.c @@ -921,6 +921,15 @@ void arc_cache_init(void) printk(arc_cache_mumbojumbo(0, str, sizeof(str))); + /* + * Only master CPU needs to execute rest of function: + * - Assume SMP so all cores will have same cache config so + * any geomtry checks will be same for all + * - IOC setup / dma callbacks only need to be setup once + */ + if (cpu) + return; + if (IS_ENABLED(CONFIG_ARC_HAS_ICACHE)) { struct cpuinfo_arc_cache *ic = &cpuinfo_arc700[cpu].icache; -- cgit v1.2.3 From fae82e59d2ff7d789878c9eb3a007ae7eb6641b2 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Sat, 16 Jul 2016 18:42:36 +0100 Subject: drm/i915: Handle ENOSPC after failing to insert a mappable node Even after adding individual page support for GTT mmaping, we can still fail to find any space within the mappable region, and drm_mm_insert_node() will then report ENOSPC. We have to then handle this error by using the shmem access to the pages. Fixes: b50a53715f09 ("drm/i915: Support for pread/pwrite ... objects") Testcase: igt/gem_concurrent_blit Signed-off-by: Chris Wilson Cc: Ankitprasad Sharma Cc: Tvrtko Ursulin (cherry picked from commit d1054ee492a89b134fb0ac527b0714c277ae9c0f) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_gem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 27ef10e4923e..aceaad0c2f18 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1306,7 +1306,7 @@ i915_gem_pwrite_ioctl(struct drm_device *dev, void *data, * textures). Fallback to the shmem path in that case. */ } - if (ret == -EFAULT) { + if (ret == -EFAULT || ret == -ENOSPC) { if (obj->phys_handle) ret = i915_gem_phys_pwrite(obj, args, file); else if (i915_gem_object_has_struct_page(obj)) -- cgit v1.2.3 From 5728e0de741a3581e9900c5cbee3a51425daf211 Mon Sep 17 00:00:00 2001 From: Ville SyrjƤlƤ Date: Tue, 12 Jul 2016 15:59:28 +0300 Subject: drm/i915: Fix iboost setting for DDI with 4 lanes on SKL MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Bspec says: "For DDIA with x4 capability (DDI_BUF_CTL DDIA Lane Capability Control = DDIA x4), the I_boost value has to be programmed in both tx_blnclegsctl_0 and tx_blnclegsctl_4." Currently we only program tx_blnclegsctl_0. Let's do the other one as well. Cc: stable@vger.kernel.org Fixes: f8896f5d58e6 ("drm/i915/skl: Buffer translation improvements") Cc: David Weinehall Signed-off-by: Ville SyrjƤlƤ Link: http://patchwork.freedesktop.org/patch/msgid/1468328376-6380-2-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: David Weinehall (cherry picked from commit a7d8dbc07c8f0faaace983b1e4c6e9495dd0aa75) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_reg.h | 1 + drivers/gpu/drm/i915/intel_ddi.c | 36 +++++++++++++++++++++++------------- 2 files changed, 24 insertions(+), 13 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index ce14fe09d962..5c06413ae0e6 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -1536,6 +1536,7 @@ enum skl_disp_power_wells { #define BALANCE_LEG_MASK(port) (7<<(8+3*(port))) /* Balance leg disable bits */ #define BALANCE_LEG_DISABLE_SHIFT 23 +#define BALANCE_LEG_DISABLE(port) (1 << (23 + (port))) /* * Fence registers diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c index dd1d6fe12297..75354cd9bbab 100644 --- a/drivers/gpu/drm/i915/intel_ddi.c +++ b/drivers/gpu/drm/i915/intel_ddi.c @@ -1379,14 +1379,30 @@ void intel_ddi_disable_pipe_clock(struct intel_crtc *intel_crtc) TRANS_CLK_SEL_DISABLED); } -static void skl_ddi_set_iboost(struct drm_i915_private *dev_priv, - u32 level, enum port port, int type) +static void _skl_ddi_set_iboost(struct drm_i915_private *dev_priv, + enum port port, uint8_t iboost) { + u32 tmp; + + tmp = I915_READ(DISPIO_CR_TX_BMU_CR0); + tmp &= ~(BALANCE_LEG_MASK(port) | BALANCE_LEG_DISABLE(port)); + if (iboost) + tmp |= iboost << BALANCE_LEG_SHIFT(port); + else + tmp |= BALANCE_LEG_DISABLE(port); + I915_WRITE(DISPIO_CR_TX_BMU_CR0, tmp); +} + +static void skl_ddi_set_iboost(struct intel_encoder *encoder, u32 level) +{ + struct intel_digital_port *intel_dig_port = enc_to_dig_port(&encoder->base); + struct drm_i915_private *dev_priv = to_i915(intel_dig_port->base.base.dev); + enum port port = intel_dig_port->port; + int type = encoder->type; const struct ddi_buf_trans *ddi_translations; uint8_t iboost; uint8_t dp_iboost, hdmi_iboost; int n_entries; - u32 reg; /* VBT may override standard boost values */ dp_iboost = dev_priv->vbt.ddi_port_info[port].dp_boost_level; @@ -1428,16 +1444,10 @@ static void skl_ddi_set_iboost(struct drm_i915_private *dev_priv, return; } - reg = I915_READ(DISPIO_CR_TX_BMU_CR0); - reg &= ~BALANCE_LEG_MASK(port); - reg &= ~(1 << (BALANCE_LEG_DISABLE_SHIFT + port)); - - if (iboost) - reg |= iboost << BALANCE_LEG_SHIFT(port); - else - reg |= 1 << (BALANCE_LEG_DISABLE_SHIFT + port); + _skl_ddi_set_iboost(dev_priv, port, iboost); - I915_WRITE(DISPIO_CR_TX_BMU_CR0, reg); + if (port == PORT_A && intel_dig_port->max_lanes == 4) + _skl_ddi_set_iboost(dev_priv, PORT_E, iboost); } static void bxt_ddi_vswing_sequence(struct drm_i915_private *dev_priv, @@ -1568,7 +1578,7 @@ uint32_t ddi_signal_levels(struct intel_dp *intel_dp) level = translate_signal_level(signal_levels); if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) - skl_ddi_set_iboost(dev_priv, level, port, encoder->type); + skl_ddi_set_iboost(encoder, level); else if (IS_BROXTON(dev_priv)) bxt_ddi_vswing_sequence(dev_priv, level, port, encoder->type); -- cgit v1.2.3 From 7ff9a55614712adf13ce7990565be0263e620f5e Mon Sep 17 00:00:00 2001 From: Ville SyrjƤlƤ Date: Tue, 12 Jul 2016 15:59:30 +0300 Subject: drm/i915: Program iboost settings for HDMI/DVI on SKL MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently we fail to program the iboost stuff for HDMI/DVI. Let's remedy that. Cc: stable@vger.kernel.org Fixes: f8896f5d58e6 ("drm/i915/skl: Buffer translation improvements") Cc: David Weinehall Signed-off-by: Ville SyrjƤlƤ Link: http://patchwork.freedesktop.org/patch/msgid/1468328376-6380-4-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: David Weinehall (cherry picked from commit 8d8bb85eb7d859aa9bbe36e588690a1d22af7608) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_ddi.c | 51 +++++++++++++++++++++++++++++++--------- 1 file changed, 40 insertions(+), 11 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c index 75354cd9bbab..415c061e2969 100644 --- a/drivers/gpu/drm/i915/intel_ddi.c +++ b/drivers/gpu/drm/i915/intel_ddi.c @@ -388,6 +388,40 @@ skl_get_buf_trans_hdmi(struct drm_i915_private *dev_priv, int *n_entries) } } +static int intel_ddi_hdmi_level(struct drm_i915_private *dev_priv, enum port port) +{ + int n_hdmi_entries; + int hdmi_level; + int hdmi_default_entry; + + hdmi_level = dev_priv->vbt.ddi_port_info[port].hdmi_level_shift; + + if (IS_BROXTON(dev_priv)) + return hdmi_level; + + if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) { + skl_get_buf_trans_hdmi(dev_priv, &n_hdmi_entries); + hdmi_default_entry = 8; + } else if (IS_BROADWELL(dev_priv)) { + n_hdmi_entries = ARRAY_SIZE(bdw_ddi_translations_hdmi); + hdmi_default_entry = 7; + } else if (IS_HASWELL(dev_priv)) { + n_hdmi_entries = ARRAY_SIZE(hsw_ddi_translations_hdmi); + hdmi_default_entry = 6; + } else { + WARN(1, "ddi translation table missing\n"); + n_hdmi_entries = ARRAY_SIZE(bdw_ddi_translations_hdmi); + hdmi_default_entry = 7; + } + + /* Choose a good default if VBT is badly populated */ + if (hdmi_level == HDMI_LEVEL_SHIFT_UNKNOWN || + hdmi_level >= n_hdmi_entries) + hdmi_level = hdmi_default_entry; + + return hdmi_level; +} + /* * Starting with Haswell, DDI port buffers must be programmed with correct * values in advance. The buffer values are different for FDI and DP modes, @@ -399,7 +433,7 @@ void intel_prepare_ddi_buffer(struct intel_encoder *encoder) { struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); u32 iboost_bit = 0; - int i, n_hdmi_entries, n_dp_entries, n_edp_entries, hdmi_default_entry, + int i, n_hdmi_entries, n_dp_entries, n_edp_entries, size; int hdmi_level; enum port port; @@ -410,7 +444,7 @@ void intel_prepare_ddi_buffer(struct intel_encoder *encoder) const struct ddi_buf_trans *ddi_translations; port = intel_ddi_get_encoder_port(encoder); - hdmi_level = dev_priv->vbt.ddi_port_info[port].hdmi_level_shift; + hdmi_level = intel_ddi_hdmi_level(dev_priv, port); if (IS_BROXTON(dev_priv)) { if (encoder->type != INTEL_OUTPUT_HDMI) @@ -430,7 +464,6 @@ void intel_prepare_ddi_buffer(struct intel_encoder *encoder) skl_get_buf_trans_edp(dev_priv, &n_edp_entries); ddi_translations_hdmi = skl_get_buf_trans_hdmi(dev_priv, &n_hdmi_entries); - hdmi_default_entry = 8; /* If we're boosting the current, set bit 31 of trans1 */ if (dev_priv->vbt.ddi_port_info[port].hdmi_boost_level || dev_priv->vbt.ddi_port_info[port].dp_boost_level) @@ -456,7 +489,6 @@ void intel_prepare_ddi_buffer(struct intel_encoder *encoder) n_dp_entries = ARRAY_SIZE(bdw_ddi_translations_dp); n_hdmi_entries = ARRAY_SIZE(bdw_ddi_translations_hdmi); - hdmi_default_entry = 7; } else if (IS_HASWELL(dev_priv)) { ddi_translations_fdi = hsw_ddi_translations_fdi; ddi_translations_dp = hsw_ddi_translations_dp; @@ -464,7 +496,6 @@ void intel_prepare_ddi_buffer(struct intel_encoder *encoder) ddi_translations_hdmi = hsw_ddi_translations_hdmi; n_dp_entries = n_edp_entries = ARRAY_SIZE(hsw_ddi_translations_dp); n_hdmi_entries = ARRAY_SIZE(hsw_ddi_translations_hdmi); - hdmi_default_entry = 6; } else { WARN(1, "ddi translation table missing\n"); ddi_translations_edp = bdw_ddi_translations_dp; @@ -474,7 +505,6 @@ void intel_prepare_ddi_buffer(struct intel_encoder *encoder) n_edp_entries = ARRAY_SIZE(bdw_ddi_translations_edp); n_dp_entries = ARRAY_SIZE(bdw_ddi_translations_dp); n_hdmi_entries = ARRAY_SIZE(bdw_ddi_translations_hdmi); - hdmi_default_entry = 7; } switch (encoder->type) { @@ -505,11 +535,6 @@ void intel_prepare_ddi_buffer(struct intel_encoder *encoder) if (encoder->type != INTEL_OUTPUT_HDMI) return; - /* Choose a good default if VBT is badly populated */ - if (hdmi_level == HDMI_LEVEL_SHIFT_UNKNOWN || - hdmi_level >= n_hdmi_entries) - hdmi_level = hdmi_default_entry; - /* Entry 9 is for HDMI: */ I915_WRITE(DDI_BUF_TRANS_LO(port, i), ddi_translations_hdmi[hdmi_level].trans1 | iboost_bit); @@ -1647,6 +1672,10 @@ static void intel_ddi_pre_enable(struct intel_encoder *intel_encoder) intel_dp_stop_link_train(intel_dp); } else if (type == INTEL_OUTPUT_HDMI) { struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder); + int level = intel_ddi_hdmi_level(dev_priv, port); + + if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) + skl_ddi_set_iboost(intel_encoder, level); intel_hdmi->set_infoframes(encoder, crtc->config->has_hdmi_sink, -- cgit v1.2.3 From d8b6161f7294b63180da443c9ff48c7efce182eb Mon Sep 17 00:00:00 2001 From: Ville SyrjƤlƤ Date: Tue, 2 Aug 2016 14:07:33 +0300 Subject: drm/i915: Clean up the extra RPM ref on CHV with i915.enable_rc6=0 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Remove the CHV early bail out from intel_cleanup_gt_powersave() so that we'll clean up the extra RPM reference held due to i915.enable_rc6=0. Cc: Imre Deak Fixes: b268c699aca5 ("drm/i915: refactor RPM disabling due to RC6 being disabled") Signed-off-by: Ville SyrjƤlƤ Link: http://patchwork.freedesktop.org/patch/msgid/1470136053-23276-1-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak (cherry picked from commit 8dac1e1f2068321fb4b7062d3c5408971f7a7e35) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_pm.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index f4f3fcc8b3be..1ff5c63f1728 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -6573,9 +6573,7 @@ void intel_init_gt_powersave(struct drm_i915_private *dev_priv) void intel_cleanup_gt_powersave(struct drm_i915_private *dev_priv) { - if (IS_CHERRYVIEW(dev_priv)) - return; - else if (IS_VALLEYVIEW(dev_priv)) + if (IS_VALLEYVIEW(dev_priv)) valleyview_cleanup_gt_powersave(dev_priv); if (!i915.enable_rc6) -- cgit v1.2.3 From 0a491b96aa59a7232f6c1a81414aa57fb8de8594 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Thu, 4 Aug 2016 08:43:53 +0100 Subject: drm/i915/fbc: FBC causes display flicker when VT-d is enabled on Skylake MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Erratum SKL075: Display Flicker May Occur When Both VT-d And FBC Are Enabled "Display flickering may occur when both FBC (Frame Buffer Compression) and VT - d (IntelĀ® Virtualization Technology for Directed I/O) are enabled and in use by the display controller." Ville found the w/a name in the database: WaFbcTurnOffFbcWhenHyperVisorIsUsed:skl,bxt and also dug out that it affects Broxton. v2: Log when the quirk is applied. v3: Ensure i915.enable_fbc is false when !HAS_FBC() v4: Fix function name after rebase v5: Add Broxton to the workaround Note for backporting to stable, we need to add #define mkwrite_device_info(ptr) \ ((struct intel_device_info *)INTEL_INFO(ptr)) Signed-off-by: Chris Wilson Cc: Paulo Zanoni Cc: Ville SyrjƤlƤ Reviewed-by: Ville SyrjƤlƤ Cc: stable@vger.kernel.org Link: http://patchwork.freedesktop.org/patch/msgid/1470296633-20388-1-git-send-email-chris@chris-wilson.co.uk (cherry picked from commit 36dbc4d76918d7557b686f807106dcc799174b12) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_fbc.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/drivers/gpu/drm/i915/intel_fbc.c b/drivers/gpu/drm/i915/intel_fbc.c index 6a7ad3ed1463..3836a1c79714 100644 --- a/drivers/gpu/drm/i915/intel_fbc.c +++ b/drivers/gpu/drm/i915/intel_fbc.c @@ -1230,12 +1230,29 @@ static int intel_sanitize_fbc_option(struct drm_i915_private *dev_priv) if (i915.enable_fbc >= 0) return !!i915.enable_fbc; + if (!HAS_FBC(dev_priv)) + return 0; + if (IS_BROADWELL(dev_priv)) return 1; return 0; } +static bool need_fbc_vtd_wa(struct drm_i915_private *dev_priv) +{ +#ifdef CONFIG_INTEL_IOMMU + /* WaFbcTurnOffFbcWhenHyperVisorIsUsed:skl,bxt */ + if (intel_iommu_gfx_mapped && + (IS_SKYLAKE(dev_priv) || IS_BROXTON(dev_priv))) { + DRM_INFO("Disabling framebuffer compression (FBC) to prevent screen flicker with VT-d enabled\n"); + return true; + } +#endif + + return false; +} + /** * intel_fbc_init - Initialize FBC * @dev_priv: the i915 device @@ -1253,6 +1270,9 @@ void intel_fbc_init(struct drm_i915_private *dev_priv) fbc->active = false; fbc->work.scheduled = false; + if (need_fbc_vtd_wa(dev_priv)) + mkwrite_device_info(dev_priv)->has_fbc = false; + i915.enable_fbc = intel_sanitize_fbc_option(dev_priv); DRM_DEBUG_KMS("Sanitized enable_fbc value: %d\n", i915.enable_fbc); -- cgit v1.2.3 From 2ca17b87e85ffada1e3da941d5c1c9ee4f56ca9f Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Thu, 4 Aug 2016 09:09:53 +0100 Subject: drm/i915: Add missing rpm wakelock to GGTT pread Joonas spotted a discrepancy between the pwrite and pread ioctls, in that pwrite takes the rpm wakelock around its GGTT access, The wakelock is required in order for the GTT to function. In disregard for the current convention, we take the rpm wakelock around the access itself rather than around the struct_mutex as the nesting is not strictly required and such ordering will one day be fixed by explicitly noting the barrier dependencies between the GGTT and rpm. Fixes: b50a53715f09 ("drm/i915: Support for pread/pwrite ...") Reported-by: Joonas Lahtinen Signed-off-by: Chris Wilson Cc: Ankitprasad Sharma Cc: Tvrtko Ursulin Cc: Joonas Lahtinen Cc: drm-intel-fixes@lists.freedesktop.org Link: http://patchwork.freedesktop.org/patch/msgid/1470298193-21765-1-git-send-email-chris@chris-wilson.co.uk Reviewed-by: Joonas Lahtinen (cherry picked from commit 1dd5b6f2020389e75bb3d269c038497f065e68c9) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_gem.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index aceaad0c2f18..a77ce9983f69 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -879,9 +879,12 @@ i915_gem_pread_ioctl(struct drm_device *dev, void *data, ret = i915_gem_shmem_pread(dev, obj, args, file); /* pread for non shmem backed objects */ - if (ret == -EFAULT || ret == -ENODEV) + if (ret == -EFAULT || ret == -ENODEV) { + intel_runtime_pm_get(to_i915(dev)); ret = i915_gem_gtt_pread(dev, obj, args->size, args->offset, args->data_ptr); + intel_runtime_pm_put(to_i915(dev)); + } out: drm_gem_object_unreference(&obj->base); -- cgit v1.2.3 From 3cffb0a44750726cdc1cc07399efe3cbb45e028b Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 3 Aug 2016 17:09:00 +0100 Subject: drm/i915: Acquire audio powerwell for HD-Audio registers On Haswell/Broadwell, the HD-Audio block is inside the HDMI/display power well and so the sna-hda audio codec acquires the display power well while it is operational. However, Skylake separates the powerwells again, but yet we still need the audio powerwell to setup the registers. (But then the hardware uses those registers even while powered off???) Acquiring the powerwell around setting the chicken bits when setting up the audio channel does at least silence the WARNs from touching our registers whilst unpowered. We silence our own test cases, but maybe there is a latent bug in using the audio channel? v2: Grab both rpm wakelock and audio wakelock Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96214 Fixes: 03b135cebc47 "ALSA: hda - remove dependency on i915 power well for SKL") Signed-off-by: Chris Wilson Cc: Libin Yang Cc: Takashi Iwai Cc: Marius Vlad Tested-by: Hans de Goede Cc: stable@vger.kernel.org Link: http://patchwork.freedesktop.org/patch/msgid/1470240540-29004-1-git-send-email-chris@chris-wilson.co.uk Reviewed-by: Daniel Vetter (cherry picked from commit d838a110f0b310d408ebe6b5a97e36ec27555ebf) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_audio.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/gpu/drm/i915/intel_audio.c b/drivers/gpu/drm/i915/intel_audio.c index 6700a7be7f78..d32f586f9c05 100644 --- a/drivers/gpu/drm/i915/intel_audio.c +++ b/drivers/gpu/drm/i915/intel_audio.c @@ -600,6 +600,8 @@ static void i915_audio_component_codec_wake_override(struct device *dev, if (!IS_SKYLAKE(dev_priv) && !IS_KABYLAKE(dev_priv)) return; + i915_audio_component_get_power(dev); + /* * Enable/disable generating the codec wake signal, overriding the * internal logic to generate the codec wake to controller. @@ -615,6 +617,8 @@ static void i915_audio_component_codec_wake_override(struct device *dev, I915_WRITE(HSW_AUD_CHICKENBIT, tmp); usleep_range(1000, 1500); } + + i915_audio_component_put_power(dev); } /* Get CDCLK in kHz */ @@ -648,6 +652,7 @@ static int i915_audio_component_sync_audio_rate(struct device *dev, !IS_HASWELL(dev_priv)) return 0; + i915_audio_component_get_power(dev); mutex_lock(&dev_priv->av_mutex); /* 1. get the pipe */ intel_encoder = dev_priv->dig_port_map[port]; @@ -698,6 +703,7 @@ static int i915_audio_component_sync_audio_rate(struct device *dev, unlock: mutex_unlock(&dev_priv->av_mutex); + i915_audio_component_put_power(dev); return err; } -- cgit v1.2.3 From 58e311b09c319183254d9220c50a533e7157c9ab Mon Sep 17 00:00:00 2001 From: Matt Roper Date: Thu, 4 Aug 2016 14:08:00 -0700 Subject: drm/i915/gen9: Give one extra block per line for SKL plane WM calculations The bspec was updated a couple weeks ago to add an extra block per line to plane watermark calculations for linear pixel formats. Bspec update 115327 description: "Gen9+ - Updated the plane blocks per line calculation for linear cases. Adds +1 for all linear cases to handle the non-block aligned stride cases." Cc: Lyude Cc: drm-intel-fixes@lists.freedesktop.org Signed-off-by: Matt Roper Link: http://patchwork.freedesktop.org/patch/msgid/1470344880-27394-1-git-send-email-matthew.d.roper@intel.com Reviewed-by: Lyude (cherry picked from commit 055c3ff69d440928964228455ec29b071258d5fa) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_pm.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 1ff5c63f1728..3c7b382d5788 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -3344,6 +3344,8 @@ static uint32_t skl_wm_method2(uint32_t pixel_rate, uint32_t pipe_htotal, plane_bytes_per_line *= 4; plane_blocks_per_line = DIV_ROUND_UP(plane_bytes_per_line, 512); plane_blocks_per_line /= 4; + } else if (tiling == DRM_FORMAT_MOD_NONE) { + plane_blocks_per_line = DIV_ROUND_UP(plane_bytes_per_line, 512) + 1; } else { plane_blocks_per_line = DIV_ROUND_UP(plane_bytes_per_line, 512); } -- cgit v1.2.3 From 85bf59d188721dca37bc8276457e68351213f38f Mon Sep 17 00:00:00 2001 From: Ville SyrjƤlƤ Date: Tue, 2 Aug 2016 15:21:57 +0300 Subject: drm/i915: Fix iboost setting for SKL Y/U DP DDI buffer translation entry 2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The spec was recently fixed to have the correct iboost setting for the SKL Y/U DP DDI buffer translation table entry 2. Update our tables to match. Cc: David Weinehall Signed-off-by: Ville SyrjƤlƤ Link: http://patchwork.freedesktop.org/patch/msgid/1470140517-13011-1-git-send-email-ville.syrjala@linux.intel.com Cc: stable@vger.kernel.org Reviewed-by: David Weinehall (cherry picked from commit 5ac9056753e79ac5ad1ccc3c99b311688e46e8c9) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_ddi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c index 415c061e2969..1a7efac65fd5 100644 --- a/drivers/gpu/drm/i915/intel_ddi.c +++ b/drivers/gpu/drm/i915/intel_ddi.c @@ -145,7 +145,7 @@ static const struct ddi_buf_trans skl_ddi_translations_dp[] = { static const struct ddi_buf_trans skl_u_ddi_translations_dp[] = { { 0x0000201B, 0x000000A2, 0x0 }, { 0x00005012, 0x00000088, 0x0 }, - { 0x80007011, 0x000000CD, 0x0 }, + { 0x80007011, 0x000000CD, 0x1 }, { 0x80009010, 0x000000C0, 0x1 }, { 0x0000201B, 0x0000009D, 0x0 }, { 0x80005012, 0x000000C0, 0x1 }, @@ -158,7 +158,7 @@ static const struct ddi_buf_trans skl_u_ddi_translations_dp[] = { static const struct ddi_buf_trans skl_y_ddi_translations_dp[] = { { 0x00000018, 0x000000A2, 0x0 }, { 0x00005012, 0x00000088, 0x0 }, - { 0x80007011, 0x000000CD, 0x0 }, + { 0x80007011, 0x000000CD, 0x3 }, { 0x80009010, 0x000000C0, 0x3 }, { 0x00000018, 0x0000009D, 0x0 }, { 0x80005012, 0x000000C0, 0x3 }, -- cgit v1.2.3 From bf74c93cd7696793eceadaf02b176500523e0b93 Mon Sep 17 00:00:00 2001 From: Matthew Auld Date: Tue, 2 Aug 2016 09:36:53 +0100 Subject: drm/i915: fix WaInsertDummyPushConstPs As pointed out by Chris Harris, we are using the wrong WA name, it should in fact be WaToEnableHwFixForPushConstHWBug, also it should be applied from C0 onwards for both BXT and KBL. Fixes: 7b9005cd45f3 ("drm/i915: Add WaInsertDummyPushConstP for bxt and kbl") Cc: Chris Harris Cc: Mika Kuoppala Reported-by: Chris Harris Signed-off-by: Matthew Auld Reviewed-by: Arun Siluvery Signed-off-by: Joonas Lahtinen Link: http://patchwork.freedesktop.org/patch/msgid/1470127013-29653-1-git-send-email-matthew.auld@intel.com (cherry picked from commit 575e3ccbce4582395d57612b289178bad4af3be8) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_ringbuffer.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index cca7792f26d5..1d3161bbea24 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -1178,8 +1178,8 @@ static int bxt_init_workarounds(struct intel_engine_cs *engine) I915_WRITE(GEN8_L3SQCREG1, L3_GENERAL_PRIO_CREDITS(62) | L3_HIGH_PRIO_CREDITS(2)); - /* WaInsertDummyPushConstPs:bxt */ - if (IS_BXT_REVID(dev_priv, 0, BXT_REVID_B0)) + /* WaToEnableHwFixForPushConstHWBug:bxt */ + if (IS_BXT_REVID(dev_priv, BXT_REVID_C0, REVID_FOREVER)) WA_SET_BIT_MASKED(COMMON_SLICE_CHICKEN2, GEN8_SBE_DISABLE_REPLAY_BUF_OPTIMIZATION); @@ -1222,8 +1222,8 @@ static int kbl_init_workarounds(struct intel_engine_cs *engine) I915_WRITE(GEN8_L3SQCREG4, I915_READ(GEN8_L3SQCREG4) | GEN8_LQSC_RO_PERF_DIS); - /* WaInsertDummyPushConstPs:kbl */ - if (IS_KBL_REVID(dev_priv, 0, KBL_REVID_B0)) + /* WaToEnableHwFixForPushConstHWBug:kbl */ + if (IS_KBL_REVID(dev_priv, KBL_REVID_C0, REVID_FOREVER)) WA_SET_BIT_MASKED(COMMON_SLICE_CHICKEN2, GEN8_SBE_DISABLE_REPLAY_BUF_OPTIMIZATION); -- cgit v1.2.3 From 3871f42a57efcdc6a9da751a8cb6fa196c212289 Mon Sep 17 00:00:00 2001 From: Matthew Auld Date: Fri, 5 Aug 2016 19:04:40 +0100 Subject: drm/i915: fix aliasing_ppgtt leak In i915_ggtt_cleanup_hw we need to remember to free aliasing_ppgtt. This fixes the following kmemleak message: unreferenced object 0xffff880213cca000 (size 8192): comm "modprobe", pid 1298, jiffies 4294745402 (age 703.930s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [] kmemleak_alloc+0x4e/0xb0 [] kmem_cache_alloc_trace+0x142/0x1d0 [] i915_gem_init_ggtt+0x10f/0x210 [i915] [] i915_gem_init+0x5b/0xd0 [i915] [] i915_driver_load+0x97a/0x1460 [i915] [] i915_pci_probe+0x4f/0x70 [i915] [] local_pci_probe+0x45/0xa0 [] pci_device_probe+0x103/0x150 [] driver_probe_device+0x22c/0x440 [] __driver_attach+0xd1/0xf0 [] bus_for_each_dev+0x6c/0xc0 [] driver_attach+0x1e/0x20 [] bus_add_driver+0x1c3/0x280 [] driver_register+0x60/0xe0 [] __pci_register_driver+0x4c/0x50 [] 0xffffffffa013605b Signed-off-by: Matthew Auld Reviewed-by: Chris Wilson Fixes: b18b6bde300e ("drm/i915/bdw: Free PPGTT struct") Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1470420280-21417-1-git-send-email-matthew.auld@intel.com (cherry picked from commit cb7f27601c81a1e0454e9461e96f65b31fafbea0) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_gem_gtt.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c index 10f1e32767e6..7a30af79d799 100644 --- a/drivers/gpu/drm/i915/i915_gem_gtt.c +++ b/drivers/gpu/drm/i915/i915_gem_gtt.c @@ -2873,6 +2873,7 @@ void i915_ggtt_cleanup_hw(struct drm_device *dev) struct i915_hw_ppgtt *ppgtt = dev_priv->mm.aliasing_ppgtt; ppgtt->base.cleanup(&ppgtt->base); + kfree(ppgtt); } i915_gem_cleanup_stolen(dev); -- cgit v1.2.3 From dfa2997055659b4e706a85fba481050cc7e7ad82 Mon Sep 17 00:00:00 2001 From: Maarten Lankhorst Date: Fri, 5 Aug 2016 23:28:27 +0300 Subject: drm/i915: Fix modeset handling during gpu reset, v5. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This function would call drm_modeset_lock_all, while the suspend/resume functions already have their own locking. Fix this by factoring out __intel_display_resume, and calling the atomic helpers for duplicating atomic state and disabling all crtc's during suspend. Changes since v1: - Deal with -EDEADLK right after lock_all and clean up calls to hw readout. - Always take all modeset locks so updates during gpu reset are blocked. Changes since v2: - Fix deadlock in intel_update_primary_planes. - Move WARN_ON(EDEADLK) to __intel_display_resume. - pctx -> ctx - only call __intel_display_resume on success in intel_display_resume. Changes since v3: - Rebase on top of dev_priv -> dev change. - Use drm_modeset_lock_all_ctx instead of drm_modeset_lock_all. Changes since v4 [by vsyrjala]: - Deal with skip_intermediate_wm - Update comment w.r.t. mode_config.mutex vs. ->detect() - Rebase due to INTEL_GEN() etc. Signed-off-by: Maarten Lankhorst Fixes: e2c8b8701e2d ("drm/i915: Use atomic helpers for suspend, v2.") Cc: stable@vger.kernel.org Tested-by: Ville SyrjƤlƤ Signed-off-by: Ville SyrjƤlƤ Link: http://patchwork.freedesktop.org/patch/msgid/1470428910-12125-2-git-send-email-ville.syrjala@linux.intel.com (cherry picked from commit 739748939974791b84629a8790527a16f76873a4) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/intel_display.c | 170 ++++++++++++++++++++++------------- 2 files changed, 111 insertions(+), 60 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 21f939074abc..20fe9d52e256 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1854,6 +1854,7 @@ struct drm_i915_private { enum modeset_restore modeset_restore; struct mutex modeset_restore_lock; struct drm_atomic_state *modeset_restore_state; + struct drm_modeset_acquire_ctx reset_ctx; struct list_head vm_list; /* Global list of all address spaces */ struct i915_ggtt ggtt; /* VM representing the global address space */ diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index c457eed76f1f..fbb8574fef66 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -3093,40 +3093,110 @@ static void intel_update_primary_planes(struct drm_device *dev) for_each_crtc(dev, crtc) { struct intel_plane *plane = to_intel_plane(crtc->primary); - struct intel_plane_state *plane_state; - - drm_modeset_lock_crtc(crtc, &plane->base); - plane_state = to_intel_plane_state(plane->base.state); + struct intel_plane_state *plane_state = + to_intel_plane_state(plane->base.state); if (plane_state->visible) plane->update_plane(&plane->base, to_intel_crtc_state(crtc->state), plane_state); + } +} + +static int +__intel_display_resume(struct drm_device *dev, + struct drm_atomic_state *state) +{ + struct drm_crtc_state *crtc_state; + struct drm_crtc *crtc; + int i, ret; + + intel_modeset_setup_hw_state(dev); + i915_redisable_vga(dev); - drm_modeset_unlock_crtc(crtc); + if (!state) + return 0; + + for_each_crtc_in_state(state, crtc, crtc_state, i) { + /* + * Force recalculation even if we restore + * current state. With fast modeset this may not result + * in a modeset when the state is compatible. + */ + crtc_state->mode_changed = true; } + + /* ignore any reset values/BIOS leftovers in the WM registers */ + to_intel_atomic_state(state)->skip_intermediate_wm = true; + + ret = drm_atomic_commit(state); + + WARN_ON(ret == -EDEADLK); + return ret; } void intel_prepare_reset(struct drm_i915_private *dev_priv) { + struct drm_device *dev = &dev_priv->drm; + struct drm_modeset_acquire_ctx *ctx = &dev_priv->reset_ctx; + struct drm_atomic_state *state; + int ret; + /* no reset support for gen2 */ if (IS_GEN2(dev_priv)) return; - /* reset doesn't touch the display */ + /* + * Need mode_config.mutex so that we don't + * trample ongoing ->detect() and whatnot. + */ + mutex_lock(&dev->mode_config.mutex); + drm_modeset_acquire_init(ctx, 0); + while (1) { + ret = drm_modeset_lock_all_ctx(dev, ctx); + if (ret != -EDEADLK) + break; + + drm_modeset_backoff(ctx); + } + + /* reset doesn't touch the display, but flips might get nuked anyway, */ if (INTEL_GEN(dev_priv) >= 5 || IS_G4X(dev_priv)) return; - drm_modeset_lock_all(&dev_priv->drm); /* * Disabling the crtcs gracefully seems nicer. Also the * g33 docs say we should at least disable all the planes. */ - intel_display_suspend(&dev_priv->drm); + state = drm_atomic_helper_duplicate_state(dev, ctx); + if (IS_ERR(state)) { + ret = PTR_ERR(state); + state = NULL; + DRM_ERROR("Duplicating state failed with %i\n", ret); + goto err; + } + + ret = drm_atomic_helper_disable_all(dev, ctx); + if (ret) { + DRM_ERROR("Suspending crtc's failed with %i\n", ret); + goto err; + } + + dev_priv->modeset_restore_state = state; + state->acquire_ctx = ctx; + return; + +err: + drm_atomic_state_free(state); } void intel_finish_reset(struct drm_i915_private *dev_priv) { + struct drm_device *dev = &dev_priv->drm; + struct drm_modeset_acquire_ctx *ctx = &dev_priv->reset_ctx; + struct drm_atomic_state *state = dev_priv->modeset_restore_state; + int ret; + /* * Flips in the rings will be nuked by the reset, * so complete all pending flips so that user space @@ -3138,6 +3208,8 @@ void intel_finish_reset(struct drm_i915_private *dev_priv) if (IS_GEN2(dev_priv)) return; + dev_priv->modeset_restore_state = NULL; + /* reset doesn't touch the display */ if (INTEL_GEN(dev_priv) >= 5 || IS_G4X(dev_priv)) { /* @@ -3149,29 +3221,32 @@ void intel_finish_reset(struct drm_i915_private *dev_priv) * FIXME: Atomic will make this obsolete since we won't schedule * CS-based flips (which might get lost in gpu resets) any more. */ - intel_update_primary_planes(&dev_priv->drm); - return; - } - - /* - * The display has been reset as well, - * so need a full re-initialization. - */ - intel_runtime_pm_disable_interrupts(dev_priv); - intel_runtime_pm_enable_interrupts(dev_priv); + intel_update_primary_planes(dev); + } else { + /* + * The display has been reset as well, + * so need a full re-initialization. + */ + intel_runtime_pm_disable_interrupts(dev_priv); + intel_runtime_pm_enable_interrupts(dev_priv); - intel_modeset_init_hw(&dev_priv->drm); + intel_modeset_init_hw(dev); - spin_lock_irq(&dev_priv->irq_lock); - if (dev_priv->display.hpd_irq_setup) - dev_priv->display.hpd_irq_setup(dev_priv); - spin_unlock_irq(&dev_priv->irq_lock); + spin_lock_irq(&dev_priv->irq_lock); + if (dev_priv->display.hpd_irq_setup) + dev_priv->display.hpd_irq_setup(dev_priv); + spin_unlock_irq(&dev_priv->irq_lock); - intel_display_resume(&dev_priv->drm); + ret = __intel_display_resume(dev, state); + if (ret) + DRM_ERROR("Restoring old state failed with %i\n", ret); - intel_hpd_init(dev_priv); + intel_hpd_init(dev_priv); + } - drm_modeset_unlock_all(&dev_priv->drm); + drm_modeset_drop_locks(ctx); + drm_modeset_acquire_fini(ctx); + mutex_unlock(&dev->mode_config.mutex); } static bool intel_crtc_has_pending_flip(struct drm_crtc *crtc) @@ -16174,9 +16249,10 @@ void intel_display_resume(struct drm_device *dev) struct drm_atomic_state *state = dev_priv->modeset_restore_state; struct drm_modeset_acquire_ctx ctx; int ret; - bool setup = false; dev_priv->modeset_restore_state = NULL; + if (state) + state->acquire_ctx = &ctx; /* * This is a cludge because with real atomic modeset mode_config.mutex @@ -16187,43 +16263,17 @@ void intel_display_resume(struct drm_device *dev) mutex_lock(&dev->mode_config.mutex); drm_modeset_acquire_init(&ctx, 0); -retry: - ret = drm_modeset_lock_all_ctx(dev, &ctx); - - if (ret == 0 && !setup) { - setup = true; - - intel_modeset_setup_hw_state(dev); - i915_redisable_vga(dev); - } - - if (ret == 0 && state) { - struct drm_crtc_state *crtc_state; - struct drm_crtc *crtc; - int i; - - state->acquire_ctx = &ctx; - - /* ignore any reset values/BIOS leftovers in the WM registers */ - to_intel_atomic_state(state)->skip_intermediate_wm = true; - - for_each_crtc_in_state(state, crtc, crtc_state, i) { - /* - * Force recalculation even if we restore - * current state. With fast modeset this may not result - * in a modeset when the state is compatible. - */ - crtc_state->mode_changed = true; - } - - ret = drm_atomic_commit(state); - } + while (1) { + ret = drm_modeset_lock_all_ctx(dev, &ctx); + if (ret != -EDEADLK) + break; - if (ret == -EDEADLK) { drm_modeset_backoff(&ctx); - goto retry; } + if (!ret) + ret = __intel_display_resume(dev, state); + drm_modeset_drop_locks(&ctx); drm_modeset_acquire_fini(&ctx); mutex_unlock(&dev->mode_config.mutex); -- cgit v1.2.3 From e7f851684efb3377e9c93aca7fae6e76212e5680 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 5 Aug 2016 23:37:34 -0700 Subject: megaraid_sas: Fix probing cards without io port Found one megaraid_sas HBA probe fails, [ 187.235190] scsi host2: Avago SAS based MegaRAID driver [ 191.112365] megaraid_sas 0000:89:00.0: BAR 0: can't reserve [io 0x0000-0x00ff] [ 191.120548] megaraid_sas 0000:89:00.0: IO memory region busy! and the card has resource like, [ 125.097714] pci 0000:89:00.0: [1000:005d] type 00 class 0x010400 [ 125.104446] pci 0000:89:00.0: reg 0x10: [io 0x0000-0x00ff] [ 125.110686] pci 0000:89:00.0: reg 0x14: [mem 0xce400000-0xce40ffff 64bit] [ 125.118286] pci 0000:89:00.0: reg 0x1c: [mem 0xce300000-0xce3fffff 64bit] [ 125.125891] pci 0000:89:00.0: reg 0x30: [mem 0xce200000-0xce2fffff pref] that does not io port resource allocated from BIOS, and kernel can not assign one as io port shortage. The driver is only looking for MEM, and should not fail. It turns out megasas_init_fw() etc are using bar index as mask. index 1 is used as mask 1, so that pci_request_selected_regions() is trying to request BAR0 instead of BAR1. Fix all related reference. Fixes: b6d5d8808b4c ("megaraid_sas: Use lowest memory bar for SR-IOV VF support") Signed-off-by: Yinghai Lu Acked-by: Kashyap Desai Signed-off-by: Martin K. Petersen --- drivers/scsi/megaraid/megaraid_sas_base.c | 6 +++--- drivers/scsi/megaraid/megaraid_sas_fusion.c | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c index 2dab3dc2aa69..c1ed25adb17e 100644 --- a/drivers/scsi/megaraid/megaraid_sas_base.c +++ b/drivers/scsi/megaraid/megaraid_sas_base.c @@ -5037,7 +5037,7 @@ static int megasas_init_fw(struct megasas_instance *instance) /* Find first memory bar */ bar_list = pci_select_bars(instance->pdev, IORESOURCE_MEM); instance->bar = find_first_bit(&bar_list, sizeof(unsigned long)); - if (pci_request_selected_regions(instance->pdev, instance->bar, + if (pci_request_selected_regions(instance->pdev, 1<bar, "megasas: LSI")) { dev_printk(KERN_DEBUG, &instance->pdev->dev, "IO memory region busy!\n"); return -EBUSY; @@ -5339,7 +5339,7 @@ fail_ready_state: iounmap(instance->reg_set); fail_ioremap: - pci_release_selected_regions(instance->pdev, instance->bar); + pci_release_selected_regions(instance->pdev, 1<bar); return -EINVAL; } @@ -5360,7 +5360,7 @@ static void megasas_release_mfi(struct megasas_instance *instance) iounmap(instance->reg_set); - pci_release_selected_regions(instance->pdev, instance->bar); + pci_release_selected_regions(instance->pdev, 1<bar); } /** diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c index ec837544f784..52d8bbf7feb5 100644 --- a/drivers/scsi/megaraid/megaraid_sas_fusion.c +++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c @@ -2603,7 +2603,7 @@ megasas_release_fusion(struct megasas_instance *instance) iounmap(instance->reg_set); - pci_release_selected_regions(instance->pdev, instance->bar); + pci_release_selected_regions(instance->pdev, 1<bar); } /** -- cgit v1.2.3 From 0d7826ddded60dbe36c451b462c24387e2727275 Mon Sep 17 00:00:00 2001 From: Brian King Date: Wed, 10 Aug 2016 22:45:57 -0400 Subject: ipr: Fix sync scsi scan Commit b195d5e2bffd ("ipr: Wait to do async scan until scsi host is initialized") fixed async scan for ipr, but broke sync scan. This fixes sync scan back up. Signed-off-by: Brian King Tested-by: Michael Ellerman Signed-off-by: Martin K. Petersen --- drivers/scsi/ipr.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index bf85974be862..17d04c702e1b 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -10410,8 +10410,11 @@ static int ipr_probe(struct pci_dev *pdev, const struct pci_device_id *dev_id) __ipr_remove(pdev); return rc; } + spin_lock_irqsave(ioa_cfg->host->host_lock, flags); + ioa_cfg->scan_enabled = 1; + schedule_work(&ioa_cfg->work_q); + spin_unlock_irqrestore(ioa_cfg->host->host_lock, flags); - scsi_scan_host(ioa_cfg->host); ioa_cfg->iopoll_weight = ioa_cfg->chip_cfg->iopoll_weight; if (ioa_cfg->iopoll_weight && ioa_cfg->sis64 && ioa_cfg->nvectors > 1) { @@ -10421,10 +10424,8 @@ static int ipr_probe(struct pci_dev *pdev, const struct pci_device_id *dev_id) } } - spin_lock_irqsave(ioa_cfg->host->host_lock, flags); - ioa_cfg->scan_enabled = 1; - schedule_work(&ioa_cfg->work_q); - spin_unlock_irqrestore(ioa_cfg->host->host_lock, flags); + scsi_scan_host(ioa_cfg->host); + return 0; } -- cgit v1.2.3 From 851da9ac53a5e7121f7c38a052f74b574dd73ec3 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 10 Aug 2016 23:54:09 +0200 Subject: drm/mediatek: add COMMON_CLK dependency On kernel builds without COMMON_CLK, the newly added mediatek drm driver fails to build: drivers/gpu/drm/mediatek/mtk_mipi_tx.c:130:16: error: field 'pll_hw' has incomplete type struct clk_hw pll_hw; ^~~~~~ In file included from ../include/linux/clk.h:16:0, from ../drivers/gpu/drm/mediatek/mtk_mipi_tx.c:14: drivers/gpu/drm/mediatek/mtk_mipi_tx.c: In function 'mtk_mipi_tx_from_clk_hw': include/linux/kernel.h:831:48: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types] const typeof( ((type *)0)->member ) *__mptr = (ptr); \ ^ /drivers/gpu/drm/mediatek/mtk_mipi_tx.c:136:9: note: in expansion of macro 'container_of' return container_of(hw, struct mtk_mipi_tx, pll_hw); ^~~~~~~~~~~~ drivers/gpu/drm/mediatek/mtk_mipi_tx.c: At top level: drivers/gpu/drm/mediatek/mtk_mipi_tx.c:302:21: error: variable 'mtk_mipi_tx_pll_ops' has initializer but incomplete type static const struct clk_ops mtk_mipi_tx_pll_ops = { This adds the required Kconfig dependency. Signed-off-by: Arnd Bergmann Acked-by: Philipp Zabel Link: https://patchwork.kernel.org/patch/9069061/ Signed-off-by: Philipp Zabel --- drivers/gpu/drm/mediatek/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/mediatek/Kconfig b/drivers/gpu/drm/mediatek/Kconfig index 23ac8041c562..5c2163737691 100644 --- a/drivers/gpu/drm/mediatek/Kconfig +++ b/drivers/gpu/drm/mediatek/Kconfig @@ -2,6 +2,7 @@ config DRM_MEDIATEK tristate "DRM Support for Mediatek SoCs" depends on DRM depends on ARCH_MEDIATEK || (ARM && COMPILE_TEST) + depends on COMMON_CLK select DRM_GEM_CMA_HELPER select DRM_KMS_HELPER select DRM_MIPI_DSI -- cgit v1.2.3 From b5db361eb7746cc9ada51554a6b996170c439f0b Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 10 Aug 2016 23:54:10 +0200 Subject: drm/mediatek: add CONFIG_OF dependency The mediatek DRM driver can be configured for compile testing with CONFIG_OF disabled, but then fails to link: drivers/gpu/built-in.o: In function `mtk_drm_bind': analogix_dp_reg.c:(.text+0x52888): undefined reference to `of_find_device_by_node' analogix_dp_reg.c:(.text+0x52930): undefined reference to `of_find_device_by_node' This adds an explicit Kconfig dependency. Signed-off-by: Arnd Bergmann Link: https://patchwork.kernel.org/patch/9120871/ Signed-off-by: Philipp Zabel --- drivers/gpu/drm/mediatek/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/mediatek/Kconfig b/drivers/gpu/drm/mediatek/Kconfig index 5c2163737691..96ebf8bb6024 100644 --- a/drivers/gpu/drm/mediatek/Kconfig +++ b/drivers/gpu/drm/mediatek/Kconfig @@ -3,6 +3,7 @@ config DRM_MEDIATEK depends on DRM depends on ARCH_MEDIATEK || (ARM && COMPILE_TEST) depends on COMMON_CLK + depends on OF select DRM_GEM_CMA_HELPER select DRM_KMS_HELPER select DRM_MIPI_DSI -- cgit v1.2.3 From 306d674a2ddd565adde7d9d6703157105c8444a6 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 10 Aug 2016 23:54:11 +0200 Subject: drm/mediatek: add ARM_SMCCC dependency ARM SMCCC is only set for ARMv7 and ARMv8 CPUs, but we currently allow the driver to be build for older architecture levels as well, which results in a link failure: drivers/gpu/built-in.o: In function `mtk_hdmi_hw_make_reg_writable': :(.text+0x1e737c): undefined reference to `arm_smccc_smc' This adds a Kconfig dependency. The patch applies on my two previous fixes that are not yet applied, so please apply all three to get randconfig builds to work correctly. Signed-off-by: Arnd Bergmann Fixes: 8f83f26891e1 ("drm/mediatek: Add HDMI support") Reviewed-by: Matthias Brugger Signed-off-by: Philipp Zabel --- drivers/gpu/drm/mediatek/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/mediatek/Kconfig b/drivers/gpu/drm/mediatek/Kconfig index 96ebf8bb6024..294de4549922 100644 --- a/drivers/gpu/drm/mediatek/Kconfig +++ b/drivers/gpu/drm/mediatek/Kconfig @@ -3,6 +3,7 @@ config DRM_MEDIATEK depends on DRM depends on ARCH_MEDIATEK || (ARM && COMPILE_TEST) depends on COMMON_CLK + depends on HAVE_ARM_SMCCC depends on OF select DRM_GEM_CMA_HELPER select DRM_KMS_HELPER -- cgit v1.2.3 From 772ce81264b179c0e61340998e3b29e900b2fa6d Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Mon, 8 Aug 2016 21:50:51 +0900 Subject: usb: renesas_usbhs: Fix receiving data corrupt on R-Car Gen3 with dmac Since R-Car Gen3 SoC has the USB-DMAC, this driver should set dparam->has_usb_dmac to 1. Otherwise, behavior of this driver and the usb-dmac driver will be mismatch, then sometimes receiving data will be corrupt. Fixes: de18757e272d ("usb: renesas_usbhs: add R-Car Gen3 power control") Cc: # v4.5+ Signed-off-by: Yoshihiro Shimoda Signed-off-by: Felipe Balbi --- drivers/usb/renesas_usbhs/common.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c index 8fbbc2d32371..ac67bab9124c 100644 --- a/drivers/usb/renesas_usbhs/common.c +++ b/drivers/usb/renesas_usbhs/common.c @@ -514,7 +514,8 @@ static struct renesas_usbhs_platform_info *usbhs_parse_dt(struct device *dev) if (gpio > 0) dparam->enable_gpio = gpio; - if (dparam->type == USBHS_TYPE_RCAR_GEN2) + if (dparam->type == USBHS_TYPE_RCAR_GEN2 || + dparam->type == USBHS_TYPE_RCAR_GEN3) dparam->has_usb_dmac = 1; return info; -- cgit v1.2.3 From 9ab967e6db7412b675ecbff80d5371d53c82cb2e Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Mon, 8 Aug 2016 21:50:52 +0900 Subject: usb: renesas_usbhs: clear the BRDYSTS in usbhsg_ep_enable() This patch fixes an issue that unexpected BRDY interruption happens when the usb_ep_{enable,disable}() are called with different direction. In this case, the driver will cause the following message: renesas_usbhs e6590000.usb: irq_ready run_error 1 : -16 This issue causes the followings: 1) A pipe is enabled as transmission 2) The pipe sent a data 3) The pipe is disabled and re-enabled as reception. 4) The pipe got a queue Since the driver doesn't clear the BRDYSTS flags after 2) above, the issue happens. If we add such clearing the flags into the driver, the code will become complicate. So, this patch clears the BRDYSTS flag of reception in usbhsg_ep_enable() to avoid complicate. Cc: # v4.1+ (usbhs_xxxsts_clear() is needed) Signed-off-by: Yoshihiro Shimoda Signed-off-by: Felipe Balbi --- drivers/usb/renesas_usbhs/mod_gadget.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c index 50f3363cc382..92bc83b92d10 100644 --- a/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/drivers/usb/renesas_usbhs/mod_gadget.c @@ -617,10 +617,13 @@ static int usbhsg_ep_enable(struct usb_ep *ep, * use dmaengine if possible. * It will use pio handler if impossible. */ - if (usb_endpoint_dir_in(desc)) + if (usb_endpoint_dir_in(desc)) { pipe->handler = &usbhs_fifo_dma_push_handler; - else + } else { pipe->handler = &usbhs_fifo_dma_pop_handler; + usbhs_xxxsts_clear(priv, BRDYSTS, + usbhs_pipe_number(pipe)); + } ret = 0; } -- cgit v1.2.3 From 700aa7ff8d2c2b9cc669c99375e2ccd06d3cd38d Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Mon, 8 Aug 2016 21:50:53 +0900 Subject: usb: renesas_usbhs: Use dmac only if the pipe type is bulk This patch fixes an issue that isochronous transfer's data is possible to be lost as a workaround. Since this driver uses a workqueue to start the dmac, the transfer is possible to be delayed when system load is high. Fixes: 6e4b74e4690d ("usb: renesas: fix scheduling in atomic context bug") Cc: # v3.4+ Signed-off-by: Yoshihiro Shimoda Signed-off-by: Felipe Balbi --- drivers/usb/renesas_usbhs/fifo.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c index 280ed5ff021b..857e78337324 100644 --- a/drivers/usb/renesas_usbhs/fifo.c +++ b/drivers/usb/renesas_usbhs/fifo.c @@ -871,7 +871,7 @@ static int usbhsf_dma_prepare_push(struct usbhs_pkt *pkt, int *is_done) /* use PIO if packet is less than pio_dma_border or pipe is DCP */ if ((len < usbhs_get_dparam(priv, pio_dma_border)) || - usbhs_pipe_is_dcp(pipe)) + usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_ISOC)) goto usbhsf_pio_prepare_push; /* check data length if this driver don't use USB-DMAC */ @@ -976,7 +976,7 @@ static int usbhsf_dma_prepare_pop_with_usb_dmac(struct usbhs_pkt *pkt, /* use PIO if packet is less than pio_dma_border or pipe is DCP */ if ((pkt->length < usbhs_get_dparam(priv, pio_dma_border)) || - usbhs_pipe_is_dcp(pipe)) + usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_ISOC)) goto usbhsf_pio_prepare_pop; fifo = usbhsf_get_dma_fifo(priv, pkt); -- cgit v1.2.3 From c526c62d565ea5a5bba9433f28756079734f430d Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Fri, 1 Jul 2016 15:33:28 +0800 Subject: usb: gadget: composite: fix dereference after null check coverify warning cdev->config is checked for null pointer at above code, so cdev->config might be null, fix it by adding null pointer check. Signed-off-by: Peter Chen Signed-off-by: Felipe Balbi --- drivers/usb/gadget/composite.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index eb648485a58c..a8ecc7a612b9 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -1913,6 +1913,8 @@ unknown: break; case USB_RECIP_ENDPOINT: + if (!cdev->config) + break; endp = ((w_index & 0x80) >> 3) | (w_index & 0x0f); list_for_each_entry(f, &cdev->config->functions, list) { if (test_bit(endp, f->endpoints)) -- cgit v1.2.3 From 88c09eacf560c3303d0ee8cf91b8b7ff7f000350 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Fri, 1 Jul 2016 15:33:29 +0800 Subject: usb: gadget: u_ether: fix dereference after null check coverify warning dev->port_usb is checked for null pointer at above code, so dev->port_usb might be null, fix it by adding null pointer check. Signed-off-by: Peter Chen Signed-off-by: Felipe Balbi --- drivers/usb/gadget/function/u_ether.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c index a3f7e7c55ebb..5f562c1ec795 100644 --- a/drivers/usb/gadget/function/u_ether.c +++ b/drivers/usb/gadget/function/u_ether.c @@ -556,7 +556,8 @@ static netdev_tx_t eth_start_xmit(struct sk_buff *skb, /* Multi frame CDC protocols may store the frame for * later which is not a dropped frame. */ - if (dev->port_usb->supports_multi_frame) + if (dev->port_usb && + dev->port_usb->supports_multi_frame) goto multiframe; goto drop; } -- cgit v1.2.3 From cee51c33f52ebf673a088a428ac0fecc33ab77fa Mon Sep 17 00:00:00 2001 From: Winter Wang Date: Wed, 27 Jul 2016 10:03:19 +0800 Subject: usb: gadget: configfs: add mutex lock before unregister gadget There may be a race condition if f_fs calls unregister_gadget_item in ffs_closed() when unregister_gadget is called by UDC store at the same time. this leads to a kernel NULL pointer dereference: [ 310.644928] Unable to handle kernel NULL pointer dereference at virtual address 00000004 [ 310.645053] init: Service 'adbd' is being killed... [ 310.658938] pgd = c9528000 [ 310.662515] [00000004] *pgd=19451831, *pte=00000000, *ppte=00000000 [ 310.669702] Internal error: Oops: 817 [#1] PREEMPT SMP ARM [ 310.675211] Modules linked in: [ 310.678294] CPU: 0 PID: 1537 Comm: ->transport Not tainted 4.1.15-03725-g793404c #2 [ 310.685958] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 310.692493] task: c8e24200 ti: c945e000 task.ti: c945e000 [ 310.697911] PC is at usb_gadget_unregister_driver+0xb4/0xd0 [ 310.703502] LR is at __mutex_lock_slowpath+0x10c/0x16c [ 310.708648] pc : [] lr : [] psr: 600f0113 [ 311.565585] [] (usb_gadget_unregister_driver) from [] (unregister_gadget_item+0x1c/0x34) [ 311.575426] [] (unregister_gadget_item) from [] (ffs_closed+0x8c/0x9c) [ 311.583702] [] (ffs_closed) from [] (ffs_data_reset+0xc/0xa0) [ 311.591194] [] (ffs_data_reset) from [] (ffs_data_closed+0x90/0xd0) [ 311.599208] [] (ffs_data_closed) from [] (ffs_ep0_release+0xc/0x14) [ 311.607224] [] (ffs_ep0_release) from [] (__fput+0x80/0x1d0) [ 311.614635] [] (__fput) from [] (task_work_run+0xb0/0xe8) [ 311.621788] [] (task_work_run) from [] (do_work_pending+0x7c/0xa4) [ 311.629718] [] (do_work_pending) from [] (work_pending+0xc/0x20) for functions using functionFS, i.e. android adbd will close /dev/usb-ffs/adb/ep0 when usb IO thread fails, but switch adb from on to off also triggers write "none" > UDC. These 2 operations both call unregister_gadget, which will lead to the panic above. add a mutex before calling unregister_gadget for api used in f_fs. Signed-off-by: Winter Wang Signed-off-by: Felipe Balbi --- drivers/usb/gadget/configfs.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c index 70cf3477f951..f9237fe2be05 100644 --- a/drivers/usb/gadget/configfs.c +++ b/drivers/usb/gadget/configfs.c @@ -1490,7 +1490,9 @@ void unregister_gadget_item(struct config_item *item) { struct gadget_info *gi = to_gadget_info(item); + mutex_lock(&gi->lock); unregister_gadget(gi); + mutex_unlock(&gi->lock); } EXPORT_SYMBOL_GPL(unregister_gadget_item); -- cgit v1.2.3 From ec57fcd042a9448096705847290d4e4e97fbb7e1 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 26 Jul 2016 14:48:39 +0000 Subject: usb: phy: omap-otg: Fix missing platform_set_drvdata() in omap_otg_probe() Add missing platform_set_drvdata() in omap_otg_probe(), otherwise calling platform_get_drvdata() in remove returns NULL. This is detected by Coccinelle semantic patch. Signed-off-by: Wei Yongjun Signed-off-by: Felipe Balbi --- drivers/usb/phy/phy-omap-otg.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/phy/phy-omap-otg.c b/drivers/usb/phy/phy-omap-otg.c index 6f6d2a7fd5a0..6523af4f8f93 100644 --- a/drivers/usb/phy/phy-omap-otg.c +++ b/drivers/usb/phy/phy-omap-otg.c @@ -140,6 +140,8 @@ static int omap_otg_probe(struct platform_device *pdev) (rev >> 4) & 0xf, rev & 0xf, config->extcon, otg_dev->id, otg_dev->vbus); + platform_set_drvdata(pdev, otg_dev); + return 0; } -- cgit v1.2.3 From 4c4f106c032ff32b89c98a4d819e68e6e643c14e Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 26 Jul 2016 14:47:00 +0000 Subject: usb: dwc3: fix missing platform_set_drvdata() in dwc3_of_simple_probe() Add missing platform_set_drvdata() in dwc3_of_simple_probe(), otherwise calling platform_get_drvdata() in remove returns NULL. This is detected by Coccinelle semantic patch. Signed-off-by: Wei Yongjun Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/dwc3-of-simple.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/dwc3/dwc3-of-simple.c b/drivers/usb/dwc3/dwc3-of-simple.c index 974335377d9f..e56d59b19a0e 100644 --- a/drivers/usb/dwc3/dwc3-of-simple.c +++ b/drivers/usb/dwc3/dwc3-of-simple.c @@ -61,6 +61,7 @@ static int dwc3_of_simple_probe(struct platform_device *pdev) if (!simple->clks) return -ENOMEM; + platform_set_drvdata(pdev, simple); simple->dev = dev; for (i = 0; i < simple->num_clocks; i++) { -- cgit v1.2.3 From 528d28138f91009f230903bd89ccd44719667831 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Tue, 26 Jul 2016 16:01:30 +0800 Subject: usb: misc: usbtest: usbtest_do_ioctl may return positive integer For case 14 and case 21, their correct return value is the number of bytes transferred, so it is a positive integer. But in usbtest_ioctl, it takes non-zero as false return value for usbtest_do_ioctl, so it will treat the correct test as wrong test, then the time on tests will be the minus value. Signed-off-by: Peter Chen Cc: stable Fixes: 18fc4ebdc705 ("usb: misc: usbtest: Remove timeval usage") Signed-off-by: Felipe Balbi --- drivers/usb/misc/usbtest.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index 6b978f04b8d7..5e3464e8d4e5 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -2602,7 +2602,7 @@ usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf) ktime_get_ts64(&start); retval = usbtest_do_ioctl(intf, param_32); - if (retval) + if (retval < 0) goto free_mutex; ktime_get_ts64(&end); -- cgit v1.2.3 From 63196e989699ddffb4e3d30ca8c3567d408820f4 Mon Sep 17 00:00:00 2001 From: Binyamin Sharet Date: Thu, 7 Jul 2016 22:22:04 +0300 Subject: usb: gadget: fix check in sync read from ep in gadgetfs When reading synchronously from a non-zero endpoint, gadgetfs will return -EFAULT even if the read succeeds, due to a bad check of the copy_to_iter() return value. This fix compares the return value of copy_to_iter to the amount of bytes that was passed, and only fails if they are not the same. Signed-off-by: Binyamin Sharet Signed-off-by: Felipe Balbi --- drivers/usb/gadget/legacy/inode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c index aa3707bdebb4..8560f2fe3af5 100644 --- a/drivers/usb/gadget/legacy/inode.c +++ b/drivers/usb/gadget/legacy/inode.c @@ -606,7 +606,7 @@ ep_read_iter(struct kiocb *iocb, struct iov_iter *to) } if (is_sync_kiocb(iocb)) { value = ep_io(epdata, buf, len); - if (value >= 0 && copy_to_iter(buf, value, to)) + if (value >= 0 && (copy_to_iter(buf, value, to) != value)) value = -EFAULT; } else { struct kiocb_priv *priv = kzalloc(sizeof *priv, GFP_KERNEL); -- cgit v1.2.3 From bd610c5aa9fcc9817d2629274a27aab81aa77cec Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Sat, 16 Jul 2016 09:04:40 +0200 Subject: usb: gadget: uvc: Fix return value in case of error If this memory allocation fail, we will return 0, which means success. Return -ENOMEM instead. Reviewed-by: Laurent Pinchart Signed-off-by: Christophe JAILLET Signed-off-by: Felipe Balbi --- drivers/usb/gadget/function/uvc_configfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/function/uvc_configfs.c b/drivers/usb/gadget/function/uvc_configfs.c index 66753ba7a42e..31125a4a2658 100644 --- a/drivers/usb/gadget/function/uvc_configfs.c +++ b/drivers/usb/gadget/function/uvc_configfs.c @@ -2023,7 +2023,7 @@ static int uvcg_streaming_class_allow_link(struct config_item *src, if (!data) { kfree(*class_array); *class_array = NULL; - ret = PTR_ERR(data); + ret = -ENOMEM; goto unlock; } cl_arr = *class_array; -- cgit v1.2.3 From 3887db5c2b6531c59e9649a4293071b575d6eb3b Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Sat, 16 Jul 2016 08:34:33 +0200 Subject: usb: gadget: composite: Fix return value in case of error In 'composite_os_desc_req_prepare', if one of the memory allocations fail, 0 will be returned, which means success. We should return -ENOMEM instead. Signed-off-by: Christophe JAILLET Signed-off-by: Felipe Balbi --- drivers/usb/gadget/composite.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index a8ecc7a612b9..5ebe6af7976e 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -2126,14 +2126,14 @@ int composite_os_desc_req_prepare(struct usb_composite_dev *cdev, cdev->os_desc_req = usb_ep_alloc_request(ep0, GFP_KERNEL); if (!cdev->os_desc_req) { - ret = PTR_ERR(cdev->os_desc_req); + ret = -ENOMEM; goto end; } /* OS feature descriptor length <= 4kB */ cdev->os_desc_req->buf = kmalloc(4096, GFP_KERNEL); if (!cdev->os_desc_req->buf) { - ret = PTR_ERR(cdev->os_desc_req->buf); + ret = -ENOMEM; kfree(cdev->os_desc_req); goto end; } -- cgit v1.2.3 From 327b21da884fe1a29f733e41792ddd53e4a30379 Mon Sep 17 00:00:00 2001 From: Mathieu Laurendeau Date: Fri, 15 Jul 2016 14:58:41 +0200 Subject: usb/gadget: fix gadgetfs aio support. Fix io submissions failing with ENODEV. Signed-off-by: Mathieu Laurendeau Fixes: 7fe3976e0f3a ("gadget: switch ep_io_operations to ->read_iter/->write_iter") Signed-off-by: Felipe Balbi --- drivers/usb/gadget/legacy/inode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c index 8560f2fe3af5..16104b5ebdcb 100644 --- a/drivers/usb/gadget/legacy/inode.c +++ b/drivers/usb/gadget/legacy/inode.c @@ -542,7 +542,7 @@ static ssize_t ep_aio(struct kiocb *iocb, */ spin_lock_irq(&epdata->dev->lock); value = -ENODEV; - if (unlikely(epdata->ep)) + if (unlikely(epdata->ep == NULL)) goto fail; req = usb_ep_alloc_request(epdata->ep, GFP_ATOMIC); -- cgit v1.2.3 From 7442e6db5bdd0dce4615205508301f9b22e502d6 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 13 Jul 2016 13:14:33 +0300 Subject: usb: gadget: fsl_qe_udc: off by one in setup_received_handle() The udc->eps[] array has USB_MAX_ENDPOINTS elements so > should be >=. Fixes: 3948f0e0c999 ('usb: add Freescale QE/CPM USB peripheral controller driver') Acked-by: Peter Chen Signed-off-by: Dan Carpenter Signed-off-by: Felipe Balbi --- drivers/usb/gadget/udc/fsl_qe_udc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/udc/fsl_qe_udc.c b/drivers/usb/gadget/udc/fsl_qe_udc.c index 93d28cb00b76..cf8819a5c5b2 100644 --- a/drivers/usb/gadget/udc/fsl_qe_udc.c +++ b/drivers/usb/gadget/udc/fsl_qe_udc.c @@ -2053,7 +2053,7 @@ static void setup_received_handle(struct qe_udc *udc, struct qe_ep *ep; if (wValue != 0 || wLength != 0 - || pipe > USB_MAX_ENDPOINTS) + || pipe >= USB_MAX_ENDPOINTS) break; ep = &udc->eps[pipe]; -- cgit v1.2.3 From 17a1dc5e22d25ba374d8c8dd8d5bf10bd20d3265 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Mon, 11 Jul 2016 09:58:16 +0800 Subject: usb: udc: core: fix error handling The udc device needs to be deleted if error occurs Fixes: 855ed04a3758 ("usb: gadget: udc-core: independent registration of gadgets and gadget drivers") Signed-off-by: Peter Chen Signed-off-by: Felipe Balbi --- drivers/usb/gadget/udc/core.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c index ff8685ea7219..934f83881c30 100644 --- a/drivers/usb/gadget/udc/core.c +++ b/drivers/usb/gadget/udc/core.c @@ -1145,7 +1145,7 @@ int usb_add_gadget_udc_release(struct device *parent, struct usb_gadget *gadget, if (ret != -EPROBE_DEFER) list_del(&driver->pending); if (ret) - goto err4; + goto err5; break; } } @@ -1154,6 +1154,9 @@ int usb_add_gadget_udc_release(struct device *parent, struct usb_gadget *gadget, return 0; +err5: + device_del(&udc->dev); + err4: list_del(&udc->list); mutex_unlock(&udc_lock); -- cgit v1.2.3 From 207707d8fd48ebc977fb2b2794004a020e1ee08e Mon Sep 17 00:00:00 2001 From: Xerox Lin Date: Wed, 29 Jun 2016 14:34:21 +0530 Subject: usb: gadget: rndis: free response queue during REMOTE_NDIS_RESET_MSG When rndis data transfer is in progress, some Windows7 Host PC is not sending the GET_ENCAPSULATED_RESPONSE command for receiving the response for the previous SEND_ENCAPSULATED_COMMAND processed. The rndis function driver appends each response for the SEND_ENCAPSULATED_COMMAND in a queue. As the above process got corrupted, the Host sends a REMOTE_NDIS_RESET_MSG command to do a soft-reset. As the rndis response queue is not freed, the previous response is sent as a part of this REMOTE_NDIS_RESET_MSG's reset response and the Host block any more Rndis transfers. Hence free the rndis response queue as a part of this soft-reset so that the correct response for REMOTE_NDIS_RESET_MSG is sent properly during the response command. Signed-off-by: Rajkumar Raghupathy Signed-off-by: Xerox Lin [AmitP: Cherry-picked this patch and folded other relevant fixes from Android common kernel android-4.4] Signed-off-by: Amit Pundir Signed-off-by: Felipe Balbi --- drivers/usb/gadget/function/rndis.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/usb/gadget/function/rndis.c b/drivers/usb/gadget/function/rndis.c index 943c21aafd3b..ab6ac1b74ac0 100644 --- a/drivers/usb/gadget/function/rndis.c +++ b/drivers/usb/gadget/function/rndis.c @@ -680,6 +680,12 @@ static int rndis_reset_response(struct rndis_params *params, { rndis_reset_cmplt_type *resp; rndis_resp_t *r; + u8 *xbuf; + u32 length; + + /* drain the response queue */ + while ((xbuf = rndis_get_next_response(params, &length))) + rndis_free_response(params, xbuf); r = rndis_add_response(params, sizeof(rndis_reset_cmplt_type)); if (!r) -- cgit v1.2.3 From 79d17482a4091056e128a5048e253f2ed53440cc Mon Sep 17 00:00:00 2001 From: Janusz Dziedzic Date: Thu, 7 Jul 2016 08:39:09 +0200 Subject: usb: dwc3: don't set last bit for ISOC endpoints According to Synopsys Databook 2.60a, section 8.3.4, it's stated that: The LST bit should be set to 0 (isochronous transfers normally continue until the endpoint is removed entirely, at which time an End Transfer command is used to stop the transfer). This patch makes sure that detail is observed and fixes a regression with Android Audio playback caused by recent changes to DWC3 gadget. Signed-off-by: Janusz Dziedzic Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/gadget.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index eb820e4ab49d..7a4d4d2534d4 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -829,7 +829,7 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep, if (!req->request.no_interrupt && !chain) trb->ctrl |= DWC3_TRB_CTRL_IOC | DWC3_TRB_CTRL_ISP_IMI; - if (last) + if (last && !usb_endpoint_xfer_isoc(dep->endpoint.desc)) trb->ctrl |= DWC3_TRB_CTRL_LST; if (chain) -- cgit v1.2.3 From a0ad85ae866f8a01f29a18ffa1e9b1aa8ca888bd Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 10 Aug 2016 18:07:46 +0300 Subject: usb: dwc3: gadget: stop processing on HWO set stop consuming TRBs when we reach one with HWO bit already set. This will prevent us from prematurely retiring a TRB. Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/gadget.c | 11 +---------- 1 file changed, 1 insertion(+), 10 deletions(-) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 7a4d4d2534d4..1f5597ef945d 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1979,16 +1979,7 @@ static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep, trb->ctrl &= ~DWC3_TRB_CTRL_HWO; if ((trb->ctrl & DWC3_TRB_CTRL_HWO) && status != -ESHUTDOWN) - /* - * We continue despite the error. There is not much we - * can do. If we don't clean it up we loop forever. If - * we skip the TRB then it gets overwritten after a - * while since we use them in a ring buffer. A BUG() - * would help. Lets hope that if this occurs, someone - * fixes the root cause instead of looking away :) - */ - dev_err(dwc->dev, "%s's TRB (%p) still owned by HW\n", - dep->name, trb); + return 1; count = trb->size & DWC3_TRB_SIZE_MASK; -- cgit v1.2.3 From 70fcad495b9903d362bdbf9ffba23259294064c8 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Thu, 11 Aug 2016 14:39:00 +0100 Subject: ASoC: Fix leak of rtd in soc_bind_dai_link If we fail to find a platform we simply return EPROBE_DEFER, but we have allocated the rtd pointer. All error paths before soc_add_pcm_runtime need to call soc_free_pcm_runtime first to avoid leaking the rtd pointer. A suitable error path already exists and is used else where in the function so simply use that here as well. Signed-off-by: Charles Keepax Signed-off-by: Mark Brown --- sound/soc/soc-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 16369cad4803..b0e23db83695 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -1056,7 +1056,7 @@ static int soc_bind_dai_link(struct snd_soc_card *card, if (!rtd->platform) { dev_err(card->dev, "ASoC: platform %s not registered\n", dai_link->platform_name); - return -EPROBE_DEFER; + goto _err_defer; } soc_add_pcm_runtime(card, rtd); -- cgit v1.2.3 From fa54aade5338937146bb6b8af93d2c27f6787ae1 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Thu, 11 Aug 2016 14:40:04 +0100 Subject: ASoC: wm2000: Fix return of uninitialised varible Anything that sets ret in wm2000_anc_transition will have immediately returned anyway as such we will always return an uninitialised ret at the bottom of the function. Simply replace the return with a return 0; Signed-off-by: Charles Keepax Signed-off-by: Mark Brown --- sound/soc/codecs/wm2000.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm2000.c b/sound/soc/codecs/wm2000.c index a67ea10f41a1..f2664396be6f 100644 --- a/sound/soc/codecs/wm2000.c +++ b/sound/soc/codecs/wm2000.c @@ -581,7 +581,7 @@ static int wm2000_anc_transition(struct wm2000_priv *wm2000, if (anc_transitions[i].dest == ANC_OFF) clk_disable_unprepare(wm2000->mclk); - return ret; + return 0; } static int wm2000_anc_set_mode(struct wm2000_priv *wm2000) -- cgit v1.2.3 From d0141191a20289f8955c1e03dad08e42e6f71ca9 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Thu, 11 Aug 2016 11:50:30 -0400 Subject: ext4: fix xattr shifting when expanding inodes The code in ext4_expand_extra_isize_ea() treated new_extra_isize argument sometimes as the desired target i_extra_isize and sometimes as the amount by which we need to grow current i_extra_isize. These happen to coincide when i_extra_isize is 0 which used to be the common case and so nobody noticed this until recently when we added i_projid to the inode and so i_extra_isize now needs to grow from 28 to 32 bytes. The result of these bugs was that we sometimes unnecessarily decided to move xattrs out of inode even if there was enough space and we often ended up corrupting in-inode xattrs because arguments to ext4_xattr_shift_entries() were just wrong. This could demonstrate itself as BUG_ON in ext4_xattr_shift_entries() triggering. Fix the problem by introducing new isize_diff variable and use it where appropriate. CC: stable@vger.kernel.org # 4.4.x Reported-by: Dave Chinner Signed-off-by: Jan Kara Signed-off-by: Theodore Ts'o --- fs/ext4/xattr.c | 27 ++++++++++++++------------- 1 file changed, 14 insertions(+), 13 deletions(-) diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c index 39e9cfb1b371..cb1d7b4482de 100644 --- a/fs/ext4/xattr.c +++ b/fs/ext4/xattr.c @@ -1353,11 +1353,13 @@ int ext4_expand_extra_isize_ea(struct inode *inode, int new_extra_isize, size_t min_offs, free; int total_ino; void *base, *start, *end; - int extra_isize = 0, error = 0, tried_min_extra_isize = 0; + int error = 0, tried_min_extra_isize = 0; int s_min_extra_isize = le16_to_cpu(EXT4_SB(inode->i_sb)->s_es->s_min_extra_isize); + int isize_diff; /* How much do we need to grow i_extra_isize */ down_write(&EXT4_I(inode)->xattr_sem); retry: + isize_diff = new_extra_isize - EXT4_I(inode)->i_extra_isize; if (EXT4_I(inode)->i_extra_isize >= new_extra_isize) { up_write(&EXT4_I(inode)->xattr_sem); return 0; @@ -1382,7 +1384,7 @@ retry: goto cleanup; free = ext4_xattr_free_space(last, &min_offs, base, &total_ino); - if (free >= new_extra_isize) { + if (free >= isize_diff) { entry = IFIRST(header); ext4_xattr_shift_entries(entry, EXT4_I(inode)->i_extra_isize - new_extra_isize, (void *)raw_inode + @@ -1414,7 +1416,7 @@ retry: end = bh->b_data + bh->b_size; min_offs = end - base; free = ext4_xattr_free_space(first, &min_offs, base, NULL); - if (free < new_extra_isize) { + if (free < isize_diff) { if (!tried_min_extra_isize && s_min_extra_isize) { tried_min_extra_isize++; new_extra_isize = s_min_extra_isize; @@ -1428,7 +1430,7 @@ retry: free = inode->i_sb->s_blocksize; } - while (new_extra_isize > 0) { + while (isize_diff > 0) { size_t offs, size, entry_size; struct ext4_xattr_entry *small_entry = NULL; struct ext4_xattr_info i = { @@ -1459,7 +1461,7 @@ retry: EXT4_XATTR_SIZE(le32_to_cpu(last->e_value_size)) + EXT4_XATTR_LEN(last->e_name_len); if (total_size <= free && total_size < min_total_size) { - if (total_size < new_extra_isize) { + if (total_size < isize_diff) { small_entry = last; } else { entry = last; @@ -1516,20 +1518,19 @@ retry: goto cleanup; entry = IFIRST(header); - if (entry_size + EXT4_XATTR_SIZE(size) >= new_extra_isize) - shift_bytes = new_extra_isize; + if (entry_size + EXT4_XATTR_SIZE(size) >= isize_diff) + shift_bytes = isize_diff; else shift_bytes = entry_size + size; /* Adjust the offsets and shift the remaining entries ahead */ - ext4_xattr_shift_entries(entry, EXT4_I(inode)->i_extra_isize - - shift_bytes, (void *)raw_inode + - EXT4_GOOD_OLD_INODE_SIZE + extra_isize + shift_bytes, + ext4_xattr_shift_entries(entry, -shift_bytes, + (void *)raw_inode + EXT4_GOOD_OLD_INODE_SIZE + + EXT4_I(inode)->i_extra_isize + shift_bytes, (void *)header, total_ino - entry_size, inode->i_sb->s_blocksize); - extra_isize += shift_bytes; - new_extra_isize -= shift_bytes; - EXT4_I(inode)->i_extra_isize = extra_isize; + isize_diff -= shift_bytes; + EXT4_I(inode)->i_extra_isize += shift_bytes; i.name = b_entry_name; i.value = buffer; -- cgit v1.2.3 From 418c12d08dc64a45107c467ec1ba29b5e69b0715 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Thu, 11 Aug 2016 11:58:32 -0400 Subject: ext4: fix xattr shifting when expanding inodes part 2 When multiple xattrs need to be moved out of inode, we did not properly recompute total size of xattr headers in the inode and the new header position. Thus when moving the second and further xattr we asked ext4_xattr_shift_entries() to move too much and from the wrong place, resulting in possible xattr value corruption or general memory corruption. CC: stable@vger.kernel.org # 4.4.x Signed-off-by: Jan Kara Signed-off-by: Theodore Ts'o --- fs/ext4/xattr.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c index cb1d7b4482de..b18b1ff7cc27 100644 --- a/fs/ext4/xattr.c +++ b/fs/ext4/xattr.c @@ -1516,6 +1516,7 @@ retry: error = ext4_xattr_ibody_set(handle, inode, &i, is); if (error) goto cleanup; + total_ino -= entry_size; entry = IFIRST(header); if (entry_size + EXT4_XATTR_SIZE(size) >= isize_diff) @@ -1526,11 +1527,11 @@ retry: ext4_xattr_shift_entries(entry, -shift_bytes, (void *)raw_inode + EXT4_GOOD_OLD_INODE_SIZE + EXT4_I(inode)->i_extra_isize + shift_bytes, - (void *)header, total_ino - entry_size, - inode->i_sb->s_blocksize); + (void *)header, total_ino, inode->i_sb->s_blocksize); isize_diff -= shift_bytes; EXT4_I(inode)->i_extra_isize += shift_bytes; + header = IHDR(inode, raw_inode); i.name = b_entry_name; i.value = buffer; -- cgit v1.2.3 From 443a8c41cd49de66a3fda45b32b9860ea0292b84 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Thu, 11 Aug 2016 12:00:01 -0400 Subject: ext4: properly align shifted xattrs when expanding inodes We did not count with the padding of xattr value when computing desired shift of xattrs in the inode when expanding i_extra_isize. As a result we could create unaligned start of inline xattrs. Account for alignment properly. CC: stable@vger.kernel.org # 4.4.x- Signed-off-by: Jan Kara --- fs/ext4/xattr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c index b18b1ff7cc27..c893f00b6dc0 100644 --- a/fs/ext4/xattr.c +++ b/fs/ext4/xattr.c @@ -1522,7 +1522,7 @@ retry: if (entry_size + EXT4_XATTR_SIZE(size) >= isize_diff) shift_bytes = isize_diff; else - shift_bytes = entry_size + size; + shift_bytes = entry_size + EXT4_XATTR_SIZE(size); /* Adjust the offsets and shift the remaining entries ahead */ ext4_xattr_shift_entries(entry, -shift_bytes, (void *)raw_inode + EXT4_GOOD_OLD_INODE_SIZE + -- cgit v1.2.3 From 539587511835ea12d8daa444cbed766cf2bc3612 Mon Sep 17 00:00:00 2001 From: Lu Baolu Date: Thu, 11 Aug 2016 10:31:14 +0800 Subject: usb: misc: usbtest: add fix for driver hang In sg_timeout(), req->status is set to "-ETIMEDOUT" before calling into usb_sg_cancel(). usb_sg_cancel() will do nothing and return directly if req->status has been set to a non-zero value. This will cause driver hang whenever transfer time out is triggered. This patch fixes this issue. It could be backported to stable kernel with version later than v3.15. Cc: stable@vger.kernel.org # 3.15+ Cc: Alan Stern Signed-off-by: Lu Baolu Suggested-by: Alan Stern Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/usbtest.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index 5e3464e8d4e5..5c8210dc6fd9 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -585,7 +585,6 @@ static void sg_timeout(unsigned long _req) { struct usb_sg_request *req = (struct usb_sg_request *) _req; - req->status = -ETIMEDOUT; usb_sg_cancel(req); } @@ -616,8 +615,10 @@ static int perform_sglist( mod_timer(&sg_timer, jiffies + msecs_to_jiffies(SIMPLE_IO_TIMEOUT)); usb_sg_wait(req); - del_timer_sync(&sg_timer); - retval = req->status; + if (!del_timer_sync(&sg_timer)) + retval = -ETIMEDOUT; + else + retval = req->status; /* FIXME check resulting data pattern */ -- cgit v1.2.3 From 2e81a4eeedcaa66e35f58b81e0755b87057ce392 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Thu, 11 Aug 2016 12:38:55 -0400 Subject: ext4: avoid deadlock when expanding inode size When we need to move xattrs into external xattr block, we call ext4_xattr_block_set() from ext4_expand_extra_isize_ea(). That may end up calling ext4_mark_inode_dirty() again which will recurse back into the inode expansion code leading to deadlocks. Protect from recursion using EXT4_STATE_NO_EXPAND inode flag and move its management into ext4_expand_extra_isize_ea() since its manipulation is safe there (due to xattr_sem) from possible races with ext4_xattr_set_handle() which plays with it as well. CC: stable@vger.kernel.org # 4.4.x Signed-off-by: Jan Kara Signed-off-by: Theodore Ts'o --- fs/ext4/inode.c | 2 -- fs/ext4/xattr.c | 19 +++++++++++++------ 2 files changed, 13 insertions(+), 8 deletions(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 5a6277d80f7c..13c95b290263 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -5466,8 +5466,6 @@ int ext4_mark_inode_dirty(handle_t *handle, struct inode *inode) sbi->s_want_extra_isize, iloc, handle); if (ret) { - ext4_set_inode_state(inode, - EXT4_STATE_NO_EXPAND); if (mnt_count != le16_to_cpu(sbi->s_es->s_mnt_count)) { ext4_warning(inode->i_sb, diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c index c893f00b6dc0..2eb935ca5d9e 100644 --- a/fs/ext4/xattr.c +++ b/fs/ext4/xattr.c @@ -1358,12 +1358,14 @@ int ext4_expand_extra_isize_ea(struct inode *inode, int new_extra_isize, int isize_diff; /* How much do we need to grow i_extra_isize */ down_write(&EXT4_I(inode)->xattr_sem); + /* + * Set EXT4_STATE_NO_EXPAND to avoid recursion when marking inode dirty + */ + ext4_set_inode_state(inode, EXT4_STATE_NO_EXPAND); retry: isize_diff = new_extra_isize - EXT4_I(inode)->i_extra_isize; - if (EXT4_I(inode)->i_extra_isize >= new_extra_isize) { - up_write(&EXT4_I(inode)->xattr_sem); - return 0; - } + if (EXT4_I(inode)->i_extra_isize >= new_extra_isize) + goto out; header = IHDR(inode, raw_inode); entry = IFIRST(header); @@ -1392,8 +1394,7 @@ retry: (void *)header, total_ino, inode->i_sb->s_blocksize); EXT4_I(inode)->i_extra_isize = new_extra_isize; - error = 0; - goto cleanup; + goto out; } /* @@ -1553,6 +1554,8 @@ retry: kfree(bs); } brelse(bh); +out: + ext4_clear_inode_state(inode, EXT4_STATE_NO_EXPAND); up_write(&EXT4_I(inode)->xattr_sem); return 0; @@ -1564,6 +1567,10 @@ cleanup: kfree(is); kfree(bs); brelse(bh); + /* + * We deliberately leave EXT4_STATE_NO_EXPAND set here since inode + * size expansion failed. + */ up_write(&EXT4_I(inode)->xattr_sem); return error; } -- cgit v1.2.3 From aa8b187eeab5e6757e959b81889ddbfda7d02ad1 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 9 Aug 2016 22:09:19 -0700 Subject: hwmon: (it87) Features mask must be 32 bit wide Coverity reports: result_independent_of_operands: data->features & (65536UL /* 1UL << 16 */) is always 0 regardless of the values of its operands. This occurs as the logical operand of if. data->features needs to be 32 bit wide since there are more than 16 features. Fixes: cc18da79d9b7 ("hwmon: (it87) Support up to 6 temperature sensors ... "); Signed-off-by: Guenter Roeck --- drivers/hwmon/it87.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index 730d84028260..d0203a115eff 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -491,7 +491,7 @@ struct it87_sio_data { struct it87_data { const struct attribute_group *groups[7]; enum chips type; - u16 features; + u32 features; u8 peci_mask; u8 old_peci_mask; -- cgit v1.2.3 From 979cf59acc9d634cc140aadd0d2915947ab303cc Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Fri, 12 Aug 2016 11:45:18 +0000 Subject: ASoC: Intel: Skylake: Fix error return code in skl_probe() Fix to return error code -ENODEV from the error handling case instead of 0, as done elsewhere in this function. Fixes: 87b2bdf02278 ("ASoC: Intel: Skylake: Initialize NHLT table") Signed-off-by: Wei Yongjun Acked-By: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c index cd59536a761d..e3e764167765 100644 --- a/sound/soc/intel/skylake/skl.c +++ b/sound/soc/intel/skylake/skl.c @@ -672,8 +672,10 @@ static int skl_probe(struct pci_dev *pci, skl->nhlt = skl_nhlt_init(bus->dev); - if (skl->nhlt == NULL) + if (skl->nhlt == NULL) { + err = -ENODEV; goto out_free; + } skl_nhlt_update_topology_bin(skl); -- cgit v1.2.3 From 4a008c002133aba0276cbc5d116bbb774aaf1b0d Mon Sep 17 00:00:00 2001 From: Thilo Cestonaro Date: Fri, 12 Aug 2016 14:39:10 +0200 Subject: hwmon: (ftsteutates) Correct ftp urls in driver documentation Signed-off-by: Thilo Cestonaro Signed-off-by: Guenter Roeck --- Documentation/hwmon/ftsteutates | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/hwmon/ftsteutates b/Documentation/hwmon/ftsteutates index 2a1bf69c6a26..8c10a916de20 100644 --- a/Documentation/hwmon/ftsteutates +++ b/Documentation/hwmon/ftsteutates @@ -19,5 +19,5 @@ enhancements. It can monitor up to 4 voltages, 16 temperatures and implemented in this driver. Specification of the chip can be found here: -ftp:///pub/Mainboard-OEM-Sales/Services/Software&Tools/Linux_SystemMonitoring&Watchdog&GPIO/BMC-Teutates_Specification_V1.21.pdf -ftp:///pub/Mainboard-OEM-Sales/Services/Software&Tools/Linux_SystemMonitoring&Watchdog&GPIO/Fujitsu_mainboards-1-Sensors_HowTo-en-US.pdf +ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Services/Software&Tools/Linux_SystemMonitoring&Watchdog&GPIO/BMC-Teutates_Specification_V1.21.pdf +ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Services/Software&Tools/Linux_SystemMonitoring&Watchdog&GPIO/Fujitsu_mainboards-1-Sensors_HowTo-en-US.pdf -- cgit v1.2.3 From e1717e0485af4f47fc4da1e979ac817f9ad61b0f Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Wed, 20 Jul 2016 12:00:06 +0300 Subject: perf intel-pt: Fix ip compression The June 2015 Intel SDM introduced IP Compression types 4 and 6. Refer to section 36.4.2.2 Target IP (TIP) Packet - IP Compression. Existing Intel PT packet decoder did not support type 4, and got type 6 wrong. Because type 3 and type 4 have the same number of bytes, the packet 'count' has been changed from being the number of ip bytes to being the type code. That allows the Intel PT decoder to correctly decide whether to sign-extend or use the last ip. However that also meant the code had to be adjusted in a number of places. Currently hardware is not using the new compression types, so this fix has no effect on existing hardware. Signed-off-by: Adrian Hunter Cc: Jiri Olsa Link: http://lkml.kernel.org/r/1469005206-3049-1-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo --- .../perf/util/intel-pt-decoder/intel-pt-decoder.c | 44 +++++++++++----------- .../util/intel-pt-decoder/intel-pt-pkt-decoder.c | 24 ++++++++---- 2 files changed, 40 insertions(+), 28 deletions(-) diff --git a/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c b/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c index 9c8f15da86ce..8ff6c6a61291 100644 --- a/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c +++ b/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c @@ -123,8 +123,6 @@ struct intel_pt_decoder { bool have_calc_cyc_to_tsc; int exec_mode; unsigned int insn_bytes; - uint64_t sign_bit; - uint64_t sign_bits; uint64_t period; enum intel_pt_period_type period_type; uint64_t tot_insn_cnt; @@ -191,9 +189,6 @@ struct intel_pt_decoder *intel_pt_decoder_new(struct intel_pt_params *params) decoder->data = params->data; decoder->return_compression = params->return_compression; - decoder->sign_bit = (uint64_t)1 << 47; - decoder->sign_bits = ~(((uint64_t)1 << 48) - 1); - decoder->period = params->period; decoder->period_type = params->period_type; @@ -362,21 +357,30 @@ int intel_pt__strerror(int code, char *buf, size_t buflen) return 0; } -static uint64_t intel_pt_calc_ip(struct intel_pt_decoder *decoder, - const struct intel_pt_pkt *packet, +static uint64_t intel_pt_calc_ip(const struct intel_pt_pkt *packet, uint64_t last_ip) { uint64_t ip; switch (packet->count) { - case 2: + case 1: ip = (last_ip & (uint64_t)0xffffffffffff0000ULL) | packet->payload; break; - case 4: + case 2: ip = (last_ip & (uint64_t)0xffffffff00000000ULL) | packet->payload; break; + case 3: + ip = packet->payload; + /* Sign-extend 6-byte ip */ + if (ip & (uint64_t)0x800000000000ULL) + ip |= (uint64_t)0xffff000000000000ULL; + break; + case 4: + ip = (last_ip & (uint64_t)0xffff000000000000ULL) | + packet->payload; + break; case 6: ip = packet->payload; break; @@ -384,16 +388,12 @@ static uint64_t intel_pt_calc_ip(struct intel_pt_decoder *decoder, return 0; } - if (ip & decoder->sign_bit) - return ip | decoder->sign_bits; - return ip; } static inline void intel_pt_set_last_ip(struct intel_pt_decoder *decoder) { - decoder->last_ip = intel_pt_calc_ip(decoder, &decoder->packet, - decoder->last_ip); + decoder->last_ip = intel_pt_calc_ip(&decoder->packet, decoder->last_ip); } static inline void intel_pt_set_ip(struct intel_pt_decoder *decoder) @@ -1657,6 +1657,12 @@ next: } } +static inline bool intel_pt_have_ip(struct intel_pt_decoder *decoder) +{ + return decoder->last_ip || decoder->packet.count == 0 || + decoder->packet.count == 3 || decoder->packet.count == 6; +} + /* Walk PSB+ packets to get in sync. */ static int intel_pt_walk_psb(struct intel_pt_decoder *decoder) { @@ -1677,8 +1683,7 @@ static int intel_pt_walk_psb(struct intel_pt_decoder *decoder) case INTEL_PT_FUP: decoder->pge = true; - if (decoder->last_ip || decoder->packet.count == 6 || - decoder->packet.count == 0) { + if (intel_pt_have_ip(decoder)) { uint64_t current_ip = decoder->ip; intel_pt_set_ip(decoder); @@ -1767,8 +1772,7 @@ static int intel_pt_walk_to_ip(struct intel_pt_decoder *decoder) case INTEL_PT_TIP_PGE: case INTEL_PT_TIP: decoder->pge = decoder->packet.type != INTEL_PT_TIP_PGD; - if (decoder->last_ip || decoder->packet.count == 6 || - decoder->packet.count == 0) + if (intel_pt_have_ip(decoder)) intel_pt_set_ip(decoder); if (decoder->ip) return 0; @@ -1776,9 +1780,7 @@ static int intel_pt_walk_to_ip(struct intel_pt_decoder *decoder) case INTEL_PT_FUP: if (decoder->overflow) { - if (decoder->last_ip || - decoder->packet.count == 6 || - decoder->packet.count == 0) + if (intel_pt_have_ip(decoder)) intel_pt_set_ip(decoder); if (decoder->ip) return 0; diff --git a/tools/perf/util/intel-pt-decoder/intel-pt-pkt-decoder.c b/tools/perf/util/intel-pt-decoder/intel-pt-pkt-decoder.c index b1257c816310..4f7b32020487 100644 --- a/tools/perf/util/intel-pt-decoder/intel-pt-pkt-decoder.c +++ b/tools/perf/util/intel-pt-decoder/intel-pt-pkt-decoder.c @@ -292,36 +292,46 @@ static int intel_pt_get_ip(enum intel_pt_pkt_type type, unsigned int byte, const unsigned char *buf, size_t len, struct intel_pt_pkt *packet) { - switch (byte >> 5) { + int ip_len; + + packet->count = byte >> 5; + + switch (packet->count) { case 0: - packet->count = 0; + ip_len = 0; break; case 1: if (len < 3) return INTEL_PT_NEED_MORE_BYTES; - packet->count = 2; + ip_len = 2; packet->payload = le16_to_cpu(*(uint16_t *)(buf + 1)); break; case 2: if (len < 5) return INTEL_PT_NEED_MORE_BYTES; - packet->count = 4; + ip_len = 4; packet->payload = le32_to_cpu(*(uint32_t *)(buf + 1)); break; case 3: - case 6: + case 4: if (len < 7) return INTEL_PT_NEED_MORE_BYTES; - packet->count = 6; + ip_len = 6; memcpy_le64(&packet->payload, buf + 1, 6); break; + case 6: + if (len < 9) + return INTEL_PT_NEED_MORE_BYTES; + ip_len = 8; + packet->payload = le64_to_cpu(*(uint64_t *)(buf + 1)); + break; default: return INTEL_PT_BAD_PACKET; } packet->type = type; - return packet->count + 1; + return ip_len + 1; } static int intel_pt_get_mode(const unsigned char *buf, size_t len, -- cgit v1.2.3 From 33da54fa86e29b87fe1e83bd0f15b4ef2be53ecb Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Thu, 11 Aug 2016 10:50:57 +0200 Subject: perf tools mem: Fix -t store option for record command Michael reported 'perf mem -t store record' being broken. The reason is latest rework of this area: commit acbe613e0c03 ("perf tools: Add monitored events array") We don't mark perf_mem_events store record when -t store option is specified. Committer notes: Before: # perf mem -t store record usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.020 MB perf.data (7 samples) ] # perf evlist cycles:ppp # After: # perf mem -t store record usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.020 MB perf.data (7 samples) ] # perf evlist cpu/mem-stores/P # Reported-by: Michael Petlan Signed-off-by: Jiri Olsa Tested-by: Arnaldo Carvalho de Melo Cc: David Ahern Cc: Namhyung Kim Cc: Peter Zijlstra Fixes: acbe613e0c03 ("perf tools: Add monitored events array") Link: http://lkml.kernel.org/r/1470905457-18311-1-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-mem.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/tools/perf/builtin-mem.c b/tools/perf/builtin-mem.c index d608a2c9e48c..d1ce29be560e 100644 --- a/tools/perf/builtin-mem.c +++ b/tools/perf/builtin-mem.c @@ -88,6 +88,9 @@ static int __cmd_record(int argc, const char **argv, struct perf_mem *mem) if (mem->operation & MEM_OPERATION_LOAD) perf_mem_events[PERF_MEM_EVENTS__LOAD].record = true; + if (mem->operation & MEM_OPERATION_STORE) + perf_mem_events[PERF_MEM_EVENTS__STORE].record = true; + if (perf_mem_events[PERF_MEM_EVENTS__LOAD].record) rec_argv[i++] = "-W"; -- cgit v1.2.3 From f046f3df665361d2f89e660f8c79ba164069f02a Mon Sep 17 00:00:00 2001 From: Ravi Bangoria Date: Thu, 11 Aug 2016 14:43:59 -0300 Subject: perf ppc64le: Fix build failure when libelf is not present arch__post_process_probe_trace_events() calls get_target_map() to prepare symbol table. get_target_map() is defined inside util/probe-event.c. probe-event.c will only get included in perf binary if CONFIG_LIBELF is set. Hence arch__post_process_probe_trace_events() needs to be defined inside #ifdef HAVE_LIBELF_SUPPORT to solve compilation error. Reported-and-Tested-by: Anton Blanchard Tested-by: Arnaldo Carvalho de Melo Cc: Peter Zijlstra Cc: Alexander Shishkin Cc: Balbir Singh Cc: Naveen N. Rao Cc: Ananth N Mavinakayanahalli Cc: Masami Hiramatsu Cc: Wang Nan Cc: Namhyung Kim Link: http://lkml.kernel.org/r/57ABFF88.8030905@linux.vnet.ibm.com [ Thunderbird MUA mangled it, fix that ] Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/arch/powerpc/util/sym-handling.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/perf/arch/powerpc/util/sym-handling.c b/tools/perf/arch/powerpc/util/sym-handling.c index 8d4dc97d80ba..35745a733100 100644 --- a/tools/perf/arch/powerpc/util/sym-handling.c +++ b/tools/perf/arch/powerpc/util/sym-handling.c @@ -97,6 +97,7 @@ void arch__fix_tev_from_maps(struct perf_probe_event *pev, } } +#ifdef HAVE_LIBELF_SUPPORT void arch__post_process_probe_trace_events(struct perf_probe_event *pev, int ntevs) { @@ -118,5 +119,6 @@ void arch__post_process_probe_trace_events(struct perf_probe_event *pev, } } } +#endif /* HAVE_LIBELF_SUPPORT */ #endif -- cgit v1.2.3 From fc520f8b4fa35ceb36f0ad031c1a297968788236 Mon Sep 17 00:00:00 2001 From: Kevin Hao Date: Fri, 12 Aug 2016 13:49:34 +0800 Subject: of/platform: disable the of_platform_default_populate_init() for all the ppc boards With the commit 44a7185c2ae6 ("of/platform: Add common method to populate default bus"), a default function is introduced to populate the default bus and this function is invoked at the arch_initcall_sync level. But a lot of ppc boards use machine_device_initcall() to populate the default bus. This means that the default populate function has higher priority and would override the arch specific population of the bus. The side effect is that some arch specific bus are not probed, then cause various malfunction due to the miss of some devices. Since it is very possible to introduce bugs if we simply change the initcall level for all these boards(about 30+). This just disable this default function for all the ppc boards. Signed-off-by: Kevin Hao Signed-off-by: Rob Herring --- drivers/of/platform.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/of/platform.c b/drivers/of/platform.c index 8aa197691074..f39ccd5aa701 100644 --- a/drivers/of/platform.c +++ b/drivers/of/platform.c @@ -497,6 +497,7 @@ int of_platform_default_populate(struct device_node *root, } EXPORT_SYMBOL_GPL(of_platform_default_populate); +#ifndef CONFIG_PPC static int __init of_platform_default_populate_init(void) { struct device_node *node; @@ -521,6 +522,7 @@ static int __init of_platform_default_populate_init(void) return 0; } arch_initcall_sync(of_platform_default_populate_init); +#endif static int of_platform_device_destroy(struct device *dev, void *data) { -- cgit v1.2.3 From a7a0729c4532c94f4e8efb4faaf6ef00e5fe19ba Mon Sep 17 00:00:00 2001 From: Jonathan Corbet Date: Fri, 12 Aug 2016 14:11:12 -0600 Subject: docs: Set the Sphinx default highlight language to "guess" This should eliminate a whole class of markup warnings, at the cost of occasionally amusing markup choices; we'll have to see if it works out. Suggested-by: Markus Heiser Signed-off-by: Jonathan Corbet --- Documentation/conf.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/conf.py b/Documentation/conf.py index 96b7aa66c89c..106ae9c740b9 100644 --- a/Documentation/conf.py +++ b/Documentation/conf.py @@ -131,7 +131,7 @@ pygments_style = 'sphinx' todo_include_todos = False primary_domain = 'C' -highlight_language = 'C' +highlight_language = 'guess' # -- Options for HTML output ---------------------------------------------- -- cgit v1.2.3 From ce7c6c9e1d997a2670aead3a7b87f4df32c11118 Mon Sep 17 00:00:00 2001 From: Greg Edwards Date: Sat, 30 Jul 2016 10:06:26 -0600 Subject: mpt3sas: Fix resume on WarpDrive flash cards mpt3sas crashes on resume after suspend with WarpDrive flash cards. The reply_post_host_index array is not set back up after the resume, and we deference a stale pointer in _base_interrupt(). [ 47.309711] BUG: unable to handle kernel paging request at ffffc90001f8006c [ 47.318289] IP: [] _base_interrupt+0x49f/0xa30 [mpt3sas] [ 47.326749] PGD 41ccaa067 PUD 41ccab067 PMD 3466c067 PTE 0 [ 47.333848] Oops: 0002 [#1] SMP ... [ 47.452708] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.7.0 #6 [ 47.460506] Hardware name: Dell Inc. OptiPlex 990/06D7TR, BIOS A18 09/24/2013 [ 47.469629] task: ffffffff81c0d500 ti: ffffffff81c00000 task.ti: ffffffff81c00000 [ 47.479112] RIP: 0010:[] [] _base_interrupt+0x49f/0xa30 [mpt3sas] [ 47.490466] RSP: 0018:ffff88041d203e30 EFLAGS: 00010002 [ 47.497801] RAX: 0000000000000001 RBX: ffff880033f4c000 RCX: 0000000000000001 [ 47.506973] RDX: ffffc90001f8006c RSI: 0000000000000082 RDI: 0000000000000082 [ 47.516141] RBP: ffff88041d203eb0 R08: ffff8804118e2820 R09: 0000000000000001 [ 47.525300] R10: 0000000000000001 R11: 00000000100c0000 R12: 0000000000000000 [ 47.534457] R13: ffff880412c487e0 R14: ffff88041a8987d8 R15: 0000000000000001 [ 47.543632] FS: 0000000000000000(0000) GS:ffff88041d200000(0000) knlGS:0000000000000000 [ 47.553796] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 47.561632] CR2: ffffc90001f8006c CR3: 0000000001c06000 CR4: 00000000000406f0 [ 47.570883] Stack: [ 47.575015] 000000001d211228 ffff88041d2100c0 ffff8800c47d8130 0000000000000100 [ 47.584625] ffff8804100c0000 100c000000000000 ffff88041a8992a0 ffff88041a8987f8 [ 47.594230] ffff88041d203e00 ffffffff81111e55 000000000000038c ffff880414ad4280 [ 47.603862] Call Trace: [ 47.608474] [ 47.610413] [] ? call_timer_fn+0x35/0x120 [ 47.620539] [] handle_irq_event_percpu+0x7f/0x1c0 [ 47.629061] [] handle_irq_event+0x2c/0x50 [ 47.636859] [] handle_edge_irq+0x6f/0x130 [ 47.644654] [] handle_irq+0x73/0x120 [ 47.652011] [] ? atomic_notifier_call_chain+0x1a/0x20 [ 47.660854] [] do_IRQ+0x4b/0xd0 [ 47.667777] [] common_interrupt+0x8c/0x8c [ 47.675635] Move the reply_post_host_index array setup into mpt3sas_base_map_resources(), which is also in the resume path. Cc: stable@vger.kernel.org Signed-off-by: Greg Edwards Acked-by: Chaitra P B Signed-off-by: Martin K. Petersen --- drivers/scsi/mpt3sas/mpt3sas_base.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 751f13edece0..750f82c339d4 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -2188,6 +2188,17 @@ mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc) } else ioc->msix96_vector = 0; + if (ioc->is_warpdrive) { + ioc->reply_post_host_index[0] = (resource_size_t __iomem *) + &ioc->chip->ReplyPostHostIndex; + + for (i = 1; i < ioc->cpu_msix_table_sz; i++) + ioc->reply_post_host_index[i] = + (resource_size_t __iomem *) + ((u8 __iomem *)&ioc->chip->Doorbell + (0x4000 + ((i - 1) + * 4))); + } + list_for_each_entry(reply_q, &ioc->reply_queue_list, list) pr_info(MPT3SAS_FMT "%s: IRQ %d\n", reply_q->name, ((ioc->msix_enable) ? "PCI-MSI-X enabled" : @@ -5280,17 +5291,6 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc) if (r) goto out_free_resources; - if (ioc->is_warpdrive) { - ioc->reply_post_host_index[0] = (resource_size_t __iomem *) - &ioc->chip->ReplyPostHostIndex; - - for (i = 1; i < ioc->cpu_msix_table_sz; i++) - ioc->reply_post_host_index[i] = - (resource_size_t __iomem *) - ((u8 __iomem *)&ioc->chip->Doorbell + (0x4000 + ((i - 1) - * 4))); - } - pci_set_drvdata(ioc->pdev, ioc->shost); r = _base_get_ioc_facts(ioc, CAN_SLEEP); if (r) -- cgit v1.2.3 From c2d5be14cb39da34b076b461d8aa2344611364c6 Mon Sep 17 00:00:00 2001 From: Jonathan Corbet Date: Fri, 12 Aug 2016 15:12:36 -0600 Subject: docs: kernel-documentation: remove some highlight directives With the conf.py change, we don't need them to avoid warnings anymore. Signed-off-by: Jonathan Corbet --- Documentation/kernel-documentation.rst | 6 ------ 1 file changed, 6 deletions(-) diff --git a/Documentation/kernel-documentation.rst b/Documentation/kernel-documentation.rst index c4eb5049da39..391decc66a18 100644 --- a/Documentation/kernel-documentation.rst +++ b/Documentation/kernel-documentation.rst @@ -366,8 +366,6 @@ Domain`_ references. Cross-referencing from reStructuredText ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -.. highlight:: none - To cross-reference the functions and types defined in the kernel-doc comments from reStructuredText documents, please use the `Sphinx C Domain`_ references. For example:: @@ -390,8 +388,6 @@ For further details, please refer to the `Sphinx C Domain`_ documentation. Function documentation ---------------------- -.. highlight:: c - The general format of a function and function-like macro kernel-doc comment is:: /** @@ -572,8 +568,6 @@ DocBook XML [DEPRECATED] Converting DocBook to Sphinx ---------------------------- -.. highlight:: none - Over time, we expect all of the documents under ``Documentation/DocBook`` to be converted to Sphinx and reStructuredText. For most DocBook XML documents, a good enough solution is to use the simple ``Documentation/sphinx/tmplcvt`` script, -- cgit v1.2.3 From e120dcb6b2a11840b08f0fc0d2e90256b7b6e842 Mon Sep 17 00:00:00 2001 From: Calvin Owens Date: Fri, 13 May 2016 13:28:21 -0700 Subject: ses: Fix racy cleanup of /sys in remove_dev() Currently we free the resources backing the enclosure device before we call device_unregister(). This is racy: during rmmod of low-level SCSI drivers that hook into enclosure, we end up with a small window of time during which writing to /sys can OOPS. Example trace with mpt3sas: general protection fault: 0000 [#1] SMP KASAN Modules linked in: mpt3sas(-) <...> RIP: [] ses_get_page2_descriptor.isra.6+0x38/0x220 [ses] Call Trace: [] ses_set_fault+0xf4/0x400 [ses] [] set_component_fault+0xa9/0xf0 [enclosure] [] dev_attr_store+0x3c/0x70 [] sysfs_kf_write+0x115/0x180 [] kernfs_fop_write+0x275/0x3a0 [] __vfs_write+0xe0/0x3e0 [] vfs_write+0x13f/0x4a0 [] SyS_write+0x111/0x230 [] entry_SYSCALL_64_fastpath+0x13/0x94 Fortunately the solution is extremely simple: call device_unregister() before we free the resources, and the race no longer exists. The driver core holds a reference over ->remove_dev(), so AFAICT this is safe. Signed-off-by: Calvin Owens Reviewed-by: James Bottomley Signed-off-by: Martin K. Petersen --- drivers/scsi/ses.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c index 53ef1cb6418e..0e8601aa877a 100644 --- a/drivers/scsi/ses.c +++ b/drivers/scsi/ses.c @@ -778,6 +778,8 @@ static void ses_intf_remove_enclosure(struct scsi_device *sdev) if (!edev) return; + enclosure_unregister(edev); + ses_dev = edev->scratch; edev->scratch = NULL; @@ -789,7 +791,6 @@ static void ses_intf_remove_enclosure(struct scsi_device *sdev) kfree(edev->component[0].scratch); put_device(&edev->edev); - enclosure_unregister(edev); } static void ses_intf_remove(struct device *cdev, -- cgit v1.2.3 From 947d2c2cd3340d11a1737d3f4781170cc3a4b74f Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 13 Aug 2016 02:54:04 +0200 Subject: PM / sleep: Update some system sleep documentation Update some documentation related to system sleep to document new features and remove outdated information from it. Signed-off-by: Rafael J. Wysocki Acked-by: Pavel Machek Reviewed-by: Chen Yu --- Documentation/power/basic-pm-debugging.txt | 27 +++++- Documentation/power/interface.txt | 151 +++++++++++++++-------------- 2 files changed, 102 insertions(+), 76 deletions(-) diff --git a/Documentation/power/basic-pm-debugging.txt b/Documentation/power/basic-pm-debugging.txt index b96098ccfe69..708f87f78a75 100644 --- a/Documentation/power/basic-pm-debugging.txt +++ b/Documentation/power/basic-pm-debugging.txt @@ -164,7 +164,32 @@ load n/2 modules more and try again. Again, if you find the offending module(s), it(they) must be unloaded every time before hibernation, and please report the problem with it(them). -c) Advanced debugging +c) Using the "test_resume" hibernation option + +/sys/power/disk generally tells the kernel what to do after creating a +hibernation image. One of the available options is "test_resume" which +causes the just created image to be used for immediate restoration. Namely, +after doing: + +# echo test_resume > /sys/power/disk +# echo disk > /sys/power/state + +a hibernation image will be created and a resume from it will be triggered +immediately without involving the platform firmware in any way. + +That test can be used to check if failures to resume from hibernation are +related to bad interactions with the platform firmware. That is, if the above +works every time, but resume from actual hibernation does not work or is +unreliable, the platform firmware may be responsible for the failures. + +On architectures and platforms that support using different kernels to restore +hibernation images (that is, the kernel used to read the image from storage and +load it into memory is different from the one included in the image) or support +kernel address space randomization, it also can be used to check if failures +to resume may be related to the differences between the restore and image +kernels. + +d) Advanced debugging In case that hibernation does not work on your system even in the minimal configuration and compiling more drivers as modules is not practical or some diff --git a/Documentation/power/interface.txt b/Documentation/power/interface.txt index f1f0f59a7c47..974916ff6608 100644 --- a/Documentation/power/interface.txt +++ b/Documentation/power/interface.txt @@ -1,75 +1,76 @@ -Power Management Interface - - -The power management subsystem provides a unified sysfs interface to -userspace, regardless of what architecture or platform one is -running. The interface exists in /sys/power/ directory (assuming sysfs -is mounted at /sys). - -/sys/power/state controls system power state. Reading from this file -returns what states are supported, which is hard-coded to 'freeze', -'standby' (Power-On Suspend), 'mem' (Suspend-to-RAM), and 'disk' -(Suspend-to-Disk). - -Writing to this file one of those strings causes the system to -transition into that state. Please see the file -Documentation/power/states.txt for a description of each of those -states. - - -/sys/power/disk controls the operating mode of the suspend-to-disk -mechanism. Suspend-to-disk can be handled in several ways. We have a -few options for putting the system to sleep - using the platform driver -(e.g. ACPI or other suspend_ops), powering off the system or rebooting the -system (for testing). - -Additionally, /sys/power/disk can be used to turn on one of the two testing -modes of the suspend-to-disk mechanism: 'testproc' or 'test'. If the -suspend-to-disk mechanism is in the 'testproc' mode, writing 'disk' to -/sys/power/state will cause the kernel to disable nonboot CPUs and freeze -tasks, wait for 5 seconds, unfreeze tasks and enable nonboot CPUs. If it is -in the 'test' mode, writing 'disk' to /sys/power/state will cause the kernel -to disable nonboot CPUs and freeze tasks, shrink memory, suspend devices, wait -for 5 seconds, resume devices, unfreeze tasks and enable nonboot CPUs. Then, -we are able to look in the log messages and work out, for example, which code -is being slow and which device drivers are misbehaving. - -Reading from this file will display all supported modes and the currently -selected one in brackets, for example - - [shutdown] reboot test testproc - -Writing to this file will accept one of - - 'platform' (only if the platform supports it) - 'shutdown' - 'reboot' - 'testproc' - 'test' - -/sys/power/image_size controls the size of the image created by -the suspend-to-disk mechanism. It can be written a string -representing a non-negative integer that will be used as an upper -limit of the image size, in bytes. The suspend-to-disk mechanism will -do its best to ensure the image size will not exceed that number. However, -if this turns out to be impossible, it will try to suspend anyway using the -smallest image possible. In particular, if "0" is written to this file, the -suspend image will be as small as possible. - -Reading from this file will display the current image size limit, which -is set to 2/5 of available RAM by default. - -/sys/power/pm_trace controls the code which saves the last PM event point in -the RTC across reboots, so that you can debug a machine that just hangs -during suspend (or more commonly, during resume). Namely, the RTC is only -used to save the last PM event point if this file contains '1'. Initially it -contains '0' which may be changed to '1' by writing a string representing a -nonzero integer into it. - -To use this debugging feature you should attempt to suspend the machine, then -reboot it and run - - dmesg -s 1000000 | grep 'hash matches' - -CAUTION: Using it will cause your machine's real-time (CMOS) clock to be -set to a random invalid time after a resume. +Power Management Interface for System Sleep + +Copyright (c) 2016 Intel Corp., Rafael J. Wysocki + +The power management subsystem provides userspace with a unified sysfs interface +for system sleep regardless of the underlying system architecture or platform. +The interface is located in the /sys/power/ directory (assuming that sysfs is +mounted at /sys). + +/sys/power/state is the system sleep state control file. + +Reading from it returns a list of supported sleep states, encoded as: + +'freeze' (Suspend-to-Idle) +'standby' (Power-On Suspend) +'mem' (Suspend-to-RAM) +'disk' (Suspend-to-Disk) + +Suspend-to-Idle is always supported. Suspend-to-Disk is always supported +too as long the kernel has been configured to support hibernation at all +(ie. CONFIG_HIBERNATION is set in the kernel configuration file). Support +for Suspend-to-RAM and Power-On Suspend depends on the capabilities of the +platform. + +If one of the strings listed in /sys/power/state is written to it, the system +will attempt to transition into the corresponding sleep state. Refer to +Documentation/power/states.txt for a description of each of those states. + +/sys/power/disk controls the operating mode of hibernation (Suspend-to-Disk). +Specifically, it tells the kernel what to do after creating a hibernation image. + +Reading from it returns a list of supported options encoded as: + +'platform' (put the system into sleep using a platform-provided method) +'shutdown' (shut the system down) +'reboot' (reboot the system) +'suspend' (trigger a Suspend-to-RAM transition) +'test_resume' (resume-after-hibernation test mode) + +The currently selected option is printed in square brackets. + +The 'platform' option is only available if the platform provides a special +mechanism to put the system to sleep after creating a hibernation image (ACPI +does that, for example). The 'suspend' option is available if Suspend-to-RAM +is supported. Refer to Documentation/power/basic_pm_debugging.txt for the +description of the 'test_resume' option. + +To select an option, write the string representing it to /sys/power/disk. + +/sys/power/image_size controls the size of hibernation images. + +It can be written a string representing a non-negative integer that will be +used as a best-effort upper limit of the image size, in bytes. The hibernation +core will do its best to ensure that the image size will not exceed that number. +However, if that turns out to be impossible to achieve, a hibernation image will +still be created and its size will be as small as possible. In particular, +writing '0' to this file will enforce hibernation images to be as small as +possible. + +Reading from this file returns the current image size limit, which is set to +around 2/5 of available RAM by default. + +/sys/power/pm_trace controls the PM trace mechanism saving the last suspend +or resume event point in the RTC across reboots. + +It helps to debug hard lockups or reboots due to device driver failures that +occur during system suspend or resume (which is more common) more effectively. + +If /sys/power/pm_trace contains '1', the fingerprint of each suspend/resume +event point in turn will be stored in the RTC memory (overwriting the actual +RTC information), so it will survive a system crash if one occurs right after +storing it and it can be used later to identify the driver that caused the crash +to happen (see Documentation/power/s2ram.txt for more information). + +Initially it contains '0' which may be changed to '1' by writing a string +representing a nonzero integer into it. -- cgit v1.2.3 From d1669c8288a2c86daa6fd59c7fb938c08589d053 Mon Sep 17 00:00:00 2001 From: Markus Heiser Date: Fri, 5 Aug 2016 11:19:43 +0200 Subject: doc-rst: customize RTD theme, drop padding of inline literal Remove the distracting (left/right) padding of inline literals. (HTML ). Requested and discussed in [1]. [1] http://www.spinics.net/lists/linux-media/msg103991.html Signed-off-by: Markus Heiser Acked-by: Hans Verkuil Signed-off-by: Jonathan Corbet --- Documentation/sphinx-static/theme_overrides.css | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/sphinx-static/theme_overrides.css b/Documentation/sphinx-static/theme_overrides.css index 3a2ac4bcfd78..e88461c4c1e6 100644 --- a/Documentation/sphinx-static/theme_overrides.css +++ b/Documentation/sphinx-static/theme_overrides.css @@ -42,11 +42,12 @@ caption a.headerlink { opacity: 0; } caption a.headerlink:hover { opacity: 1; } - /* inline literal: drop the borderbox and red color */ + /* inline literal: drop the borderbox, padding and red color */ code, .rst-content tt, .rst-content code { color: inherit; border: none; + padding: unset; background: inherit; font-size: 85%; } -- cgit v1.2.3 From ce8cb803d8b90458495f23606c706f0c0c857cdc Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Fri, 12 Aug 2016 18:40:23 +0200 Subject: i2c: mux: demux-pinctrl: properly roll back when adding adapter fails We also need to revert the dynamic OF change, so we get a consistent state again. Otherwise, we might have two devices enabled e.g. after pinctrl setup fails. Signed-off-by: Wolfram Sang Signed-off-by: Wolfram Sang Cc: stable@kernel.org --- drivers/i2c/muxes/i2c-demux-pinctrl.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/muxes/i2c-demux-pinctrl.c b/drivers/i2c/muxes/i2c-demux-pinctrl.c index 8de073aed001..215ac87f606d 100644 --- a/drivers/i2c/muxes/i2c-demux-pinctrl.c +++ b/drivers/i2c/muxes/i2c-demux-pinctrl.c @@ -68,7 +68,7 @@ static int i2c_demux_activate_master(struct i2c_demux_pinctrl_priv *priv, u32 ne adap = of_find_i2c_adapter_by_node(priv->chan[new_chan].parent_np); if (!adap) { ret = -ENODEV; - goto err; + goto err_with_revert; } p = devm_pinctrl_get_select(adap->dev.parent, priv->bus_name); @@ -103,6 +103,8 @@ static int i2c_demux_activate_master(struct i2c_demux_pinctrl_priv *priv, u32 ne err_with_put: i2c_put_adapter(adap); + err_with_revert: + of_changeset_revert(&priv->chan[new_chan].chgset); err: dev_err(priv->dev, "failed to setup demux-adapter %d (%d)\n", new_chan, ret); return ret; -- cgit v1.2.3 From 4d01d88019261d05ec3bff5f1a6013393faa3b9e Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Wed, 10 Aug 2016 13:37:18 -0700 Subject: i2c: cros-ec-tunnel: Fix usage of cros_ec_cmd_xfer() cros_ec_cmd_xfer returns success status if the command transport completes successfully, but the execution result is incorrectly ignored. In many cases, the execution result is assumed to be successful, leading to ignored errors and operating on uninitialized data. We've recently introduced the cros_ec_cmd_xfer_status() helper to avoid these problems. Let's use it. [Regarding the 'Fixes' tag; there is significant refactoring since the driver's introduction, but the underlying logical error exists throughout I believe] Fixes: 9d230c9e4f4e ("i2c: ChromeOS EC tunnel driver") Cc: # 9798ac6d32c1 mfd: cros_ec: Add cros_ec_cmd_xfer_status() helper Signed-off-by: Brian Norris Reviewed-by: Javier Martinez Canillas Reviewed-by: Guenter Roeck Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-cros-ec-tunnel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-cros-ec-tunnel.c b/drivers/i2c/busses/i2c-cros-ec-tunnel.c index a0d95ff682ae..2d5ff86398d0 100644 --- a/drivers/i2c/busses/i2c-cros-ec-tunnel.c +++ b/drivers/i2c/busses/i2c-cros-ec-tunnel.c @@ -215,7 +215,7 @@ static int ec_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg i2c_msgs[], msg->outsize = request_len; msg->insize = response_len; - result = cros_ec_cmd_xfer(bus->ec, msg); + result = cros_ec_cmd_xfer_status(bus->ec, msg); if (result < 0) { dev_err(dev, "Error transferring EC i2c message %d\n", result); goto exit; -- cgit v1.2.3 From 97ccd4af120c6ee183f424f17672870809bd6efd Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Thu, 4 Aug 2016 02:38:44 +0300 Subject: i2c: ocores: add missed clk_disable_unprepare() on failure paths clk_disable_unprepare() is missed on failure paths in ocores_i2c_probe(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Acked-by: Peter Korsgaard Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-ocores.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c index dfa7a4b4a91d..ac88a524143e 100644 --- a/drivers/i2c/busses/i2c-ocores.c +++ b/drivers/i2c/busses/i2c-ocores.c @@ -379,6 +379,7 @@ static int ocores_i2c_of_probe(struct platform_device *pdev, if (!clock_frequency_present) { dev_err(&pdev->dev, "Missing required parameter 'opencores,ip-clock-frequency'\n"); + clk_disable_unprepare(i2c->clk); return -ENODEV; } i2c->ip_clock_khz = clock_frequency / 1000; @@ -467,20 +468,21 @@ static int ocores_i2c_probe(struct platform_device *pdev) default: dev_err(&pdev->dev, "Unsupported I/O width (%d)\n", i2c->reg_io_width); - return -EINVAL; + ret = -EINVAL; + goto err_clk; } } ret = ocores_init(&pdev->dev, i2c); if (ret) - return ret; + goto err_clk; init_waitqueue_head(&i2c->wait); ret = devm_request_irq(&pdev->dev, irq, ocores_isr, 0, pdev->name, i2c); if (ret) { dev_err(&pdev->dev, "Cannot claim IRQ\n"); - return ret; + goto err_clk; } /* hook up driver to tree */ @@ -494,7 +496,7 @@ static int ocores_i2c_probe(struct platform_device *pdev) ret = i2c_add_adapter(&i2c->adap); if (ret) { dev_err(&pdev->dev, "Failed to add adapter\n"); - return ret; + goto err_clk; } /* add in known devices to the bus */ @@ -504,6 +506,10 @@ static int ocores_i2c_probe(struct platform_device *pdev) } return 0; + +err_clk: + clk_disable_unprepare(i2c->clk); + return ret; } static int ocores_i2c_remove(struct platform_device *pdev) -- cgit v1.2.3 From 434f14e745442a4230a40cf47f84deac1028f64f Mon Sep 17 00:00:00 2001 From: Cyrille Pitchen Date: Wed, 3 Aug 2016 16:58:26 +0200 Subject: i2c: at91: fix support of the "alternative command" feature The "alternative command" feature was introduced with sama5d2 SoCs. Its purpose is to let the hardware i2c controller automatically send the STOP condition on the i2c bus at the end of a data transfer. Without this feature, the i2c driver has to write the 'STOP' bit into the Control Register so the hardware i2c controller is triggered to send the STOP condition on the bus. Using the "alternative command" feature requires to set the transfer data length into the 8bit DATAL field of the Alternative Command Register. Hence only data transfers up to 255 bytes can take advantage of the "alternative command" feature. For greater data transfer sizes, the driver should use the previous implementation, when the "alternative command" support was not implemented yet. Signed-off-by: Cyrille Pitchen Signed-off-by: Ludovic Desroches Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-at91.c | 24 ++++++++++++++---------- 1 file changed, 14 insertions(+), 10 deletions(-) diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c index f23372669f77..1bb97f658b47 100644 --- a/drivers/i2c/busses/i2c-at91.c +++ b/drivers/i2c/busses/i2c-at91.c @@ -38,6 +38,7 @@ #define AT91_I2C_TIMEOUT msecs_to_jiffies(100) /* transfer timeout */ #define AT91_I2C_DMA_THRESHOLD 8 /* enable DMA if transfer size is bigger than this threshold */ #define AUTOSUSPEND_TIMEOUT 2000 +#define AT91_I2C_MAX_ALT_CMD_DATA_SIZE 256 /* AT91 TWI register definitions */ #define AT91_TWI_CR 0x0000 /* Control Register */ @@ -141,6 +142,7 @@ struct at91_twi_dev { unsigned twi_cwgr_reg; struct at91_twi_pdata *pdata; bool use_dma; + bool use_alt_cmd; bool recv_len_abort; u32 fifo_size; struct at91_twi_dma dma; @@ -269,7 +271,7 @@ static void at91_twi_write_next_byte(struct at91_twi_dev *dev) /* send stop when last byte has been written */ if (--dev->buf_len == 0) - if (!dev->pdata->has_alt_cmd) + if (!dev->use_alt_cmd) at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP); dev_dbg(dev->dev, "wrote 0x%x, to go %d\n", *dev->buf, dev->buf_len); @@ -292,7 +294,7 @@ static void at91_twi_write_data_dma_callback(void *data) * we just have to enable TXCOMP one. */ at91_twi_write(dev, AT91_TWI_IER, AT91_TWI_TXCOMP); - if (!dev->pdata->has_alt_cmd) + if (!dev->use_alt_cmd) at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP); } @@ -410,7 +412,7 @@ static void at91_twi_read_next_byte(struct at91_twi_dev *dev) } /* send stop if second but last byte has been read */ - if (!dev->pdata->has_alt_cmd && dev->buf_len == 1) + if (!dev->use_alt_cmd && dev->buf_len == 1) at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP); dev_dbg(dev->dev, "read 0x%x, to go %d\n", *dev->buf, dev->buf_len); @@ -426,7 +428,7 @@ static void at91_twi_read_data_dma_callback(void *data) dma_unmap_single(dev->dev, sg_dma_address(&dev->dma.sg[0]), dev->buf_len, DMA_FROM_DEVICE); - if (!dev->pdata->has_alt_cmd) { + if (!dev->use_alt_cmd) { /* The last two bytes have to be read without using dma */ dev->buf += dev->buf_len - 2; dev->buf_len = 2; @@ -443,7 +445,7 @@ static void at91_twi_read_data_dma(struct at91_twi_dev *dev) struct dma_chan *chan_rx = dma->chan_rx; size_t buf_len; - buf_len = (dev->pdata->has_alt_cmd) ? dev->buf_len : dev->buf_len - 2; + buf_len = (dev->use_alt_cmd) ? dev->buf_len : dev->buf_len - 2; dma->direction = DMA_FROM_DEVICE; /* Keep in mind that we won't use dma to read the last two bytes */ @@ -651,7 +653,7 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev) unsigned start_flags = AT91_TWI_START; /* if only one byte is to be read, immediately stop transfer */ - if (!has_alt_cmd && dev->buf_len <= 1 && + if (!dev->use_alt_cmd && dev->buf_len <= 1 && !(dev->msg->flags & I2C_M_RECV_LEN)) start_flags |= AT91_TWI_STOP; at91_twi_write(dev, AT91_TWI_CR, start_flags); @@ -745,7 +747,7 @@ static int at91_twi_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, int num) int ret; unsigned int_addr_flag = 0; struct i2c_msg *m_start = msg; - bool is_read, use_alt_cmd = false; + bool is_read; dev_dbg(&adap->dev, "at91_xfer: processing %d messages:\n", num); @@ -768,14 +770,16 @@ static int at91_twi_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, int num) at91_twi_write(dev, AT91_TWI_IADR, internal_address); } + dev->use_alt_cmd = false; is_read = (m_start->flags & I2C_M_RD); if (dev->pdata->has_alt_cmd) { - if (m_start->len > 0) { + if (m_start->len > 0 && + m_start->len < AT91_I2C_MAX_ALT_CMD_DATA_SIZE) { at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_ACMEN); at91_twi_write(dev, AT91_TWI_ACR, AT91_TWI_ACR_DATAL(m_start->len) | ((is_read) ? AT91_TWI_ACR_DIR : 0)); - use_alt_cmd = true; + dev->use_alt_cmd = true; } else { at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_ACMDIS); } @@ -784,7 +788,7 @@ static int at91_twi_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, int num) at91_twi_write(dev, AT91_TWI_MMR, (m_start->addr << 16) | int_addr_flag | - ((!use_alt_cmd && is_read) ? AT91_TWI_MREAD : 0)); + ((!dev->use_alt_cmd && is_read) ? AT91_TWI_MREAD : 0)); dev->buf_len = m_start->len; dev->buf = m_start->buf; -- cgit v1.2.3 From 8d263be8716da67bd8746e266c1934cb9c9933cc Mon Sep 17 00:00:00 2001 From: Daniel Wagner Date: Wed, 3 Aug 2016 14:03:08 +0200 Subject: i2c: bcm-iproc: Use complete() instead of complete_all() There is only one waiter for the completion, therefore there is no need to use complete_all(). Let's make that clear by using complete() instead of complete_all(). The usage pattern of the completion is: bcm_iproc_i2c_xfer_single_msg() reinit_completion() ... (activate the transfer) ... wait_for_completion_timeout() Signed-off-by: Daniel Wagner Acked-by: Ray Jui Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-bcm-iproc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c b/drivers/i2c/busses/i2c-bcm-iproc.c index 19c843828fe2..95f7cac76f89 100644 --- a/drivers/i2c/busses/i2c-bcm-iproc.c +++ b/drivers/i2c/busses/i2c-bcm-iproc.c @@ -158,7 +158,7 @@ static irqreturn_t bcm_iproc_i2c_isr(int irq, void *data) if (status & BIT(IS_M_START_BUSY_SHIFT)) { iproc_i2c->xfer_is_done = 1; - complete_all(&iproc_i2c->done); + complete(&iproc_i2c->done); } writel(status, iproc_i2c->base + IS_OFFSET); -- cgit v1.2.3 From 752c3899f97c469efea42b1ad6de66d18a21ce09 Mon Sep 17 00:00:00 2001 From: Daniel Wagner Date: Wed, 3 Aug 2016 14:03:09 +0200 Subject: i2c: bcm-kona: Use complete() instead of complete_all() There is only one waiter for the completion, therefore there is no need to use complete_all(). Let's make that clear by using complete() instead of complete_all(). The usage pattern of the completion is: bcm_kona_send_i2c_cmd() reinit_completion() ... bcm_kona_i2c_send_cmd_to_ctrl() ... wait_for_completion_timeout() Signed-off-by: Daniel Wagner Acked-by: Ray Jui Reviewed-by: Tim Kryger Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-bcm-kona.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-bcm-kona.c b/drivers/i2c/busses/i2c-bcm-kona.c index ac9f47679c3a..f98743277e3c 100644 --- a/drivers/i2c/busses/i2c-bcm-kona.c +++ b/drivers/i2c/busses/i2c-bcm-kona.c @@ -229,7 +229,7 @@ static irqreturn_t bcm_kona_i2c_isr(int irq, void *devid) dev->base + TXFCR_OFFSET); writel(status & ~ISR_RESERVED_MASK, dev->base + ISR_OFFSET); - complete_all(&dev->done); + complete(&dev->done); return IRQ_HANDLED; } -- cgit v1.2.3 From fea03a6ab1d8e456c0319c194150621629504f80 Mon Sep 17 00:00:00 2001 From: Daniel Wagner Date: Wed, 3 Aug 2016 14:03:10 +0200 Subject: i2c: brcmstb: Use complete() instead of complete_all() There is only one waiter for the completion, therefore there is no need to use complete_all(). Let's make that clear by using complete() instead of complete_all(). The usage pattern of the completion is: brcmstb_send_i2c_cmd() reinit_completion() ... /* initiate transfer by setting iic_enable */ ... brcmstb_i2c_wait_for_completion() Signed-off-by: Daniel Wagner Reviewed-by: Kamal Dasu Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-brcmstb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-brcmstb.c b/drivers/i2c/busses/i2c-brcmstb.c index 3f5a4d71d3bf..385b57bfcb38 100644 --- a/drivers/i2c/busses/i2c-brcmstb.c +++ b/drivers/i2c/busses/i2c-brcmstb.c @@ -228,7 +228,7 @@ static irqreturn_t brcmstb_i2c_isr(int irq, void *devid) return IRQ_NONE; brcmstb_i2c_enable_disable_irq(dev, INT_DISABLE); - complete_all(&dev->done); + complete(&dev->done); dev_dbg(dev->device, "isr handled"); return IRQ_HANDLED; -- cgit v1.2.3 From 0268263f0cf2239eb3a747936d8d36ef5f5e1688 Mon Sep 17 00:00:00 2001 From: Daniel Wagner Date: Wed, 3 Aug 2016 14:03:11 +0200 Subject: i2c: meson: Use complete() instead of complete_all() There is only one waiter for the completion, therefore there is no need to use complete_all(). Let's make that clear by using complete() instead of complete_all(). The usage pattern of the completion is: meson_i2c_xfer_msg() reinit_completion() ... /* Start the transfer */ ... wait_for_completion_timeout() Signed-off-by: Daniel Wagner Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-meson.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/i2c/busses/i2c-meson.c b/drivers/i2c/busses/i2c-meson.c index 71d3929adf54..76e28980904f 100644 --- a/drivers/i2c/busses/i2c-meson.c +++ b/drivers/i2c/busses/i2c-meson.c @@ -211,7 +211,7 @@ static void meson_i2c_stop(struct meson_i2c *i2c) meson_i2c_add_token(i2c, TOKEN_STOP); } else { i2c->state = STATE_IDLE; - complete_all(&i2c->done); + complete(&i2c->done); } } @@ -238,7 +238,7 @@ static irqreturn_t meson_i2c_irq(int irqno, void *dev_id) dev_dbg(i2c->dev, "error bit set\n"); i2c->error = -ENXIO; i2c->state = STATE_IDLE; - complete_all(&i2c->done); + complete(&i2c->done); goto out; } @@ -269,7 +269,7 @@ static irqreturn_t meson_i2c_irq(int irqno, void *dev_id) break; case STATE_STOP: i2c->state = STATE_IDLE; - complete_all(&i2c->done); + complete(&i2c->done); break; case STATE_IDLE: break; -- cgit v1.2.3 From d9853490176c88fff71d03ec9a174b77011f5026 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Thu, 28 Jul 2016 11:50:48 +0200 Subject: drm/etnaviv: take GPU lock later in the submit process Both the fence and event alloc are safe to be done without holding the GPU lock, as they either don't need any locking (fences) or are protected by their own lock (events). This solves a bad locking interaction between the submit path and the recover worker. If userspace manages to exhaust all available events while the GPU is hung, the submit will wait for events to become available holding the GPU lock. The recover worker waits for this lock to become available before trying to recover the GPU which frees up the allocated events. Essentially both paths are deadlocked until the submit path times out waiting for available events, failing the submit that could otherwise be handled just fine if the recover worker had the chance to bring the GPU back in a working state. Signed-off-by: Lucas Stach Reviewed-by: Christian Gmeiner --- drivers/gpu/drm/etnaviv/etnaviv_gpu.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c index 87ef34150d46..b382cf505262 100644 --- a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c +++ b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c @@ -1333,8 +1333,6 @@ int etnaviv_gpu_submit(struct etnaviv_gpu *gpu, if (ret < 0) return ret; - mutex_lock(&gpu->lock); - /* * TODO * @@ -1348,16 +1346,18 @@ int etnaviv_gpu_submit(struct etnaviv_gpu *gpu, if (unlikely(event == ~0U)) { DRM_ERROR("no free event\n"); ret = -EBUSY; - goto out_unlock; + goto out_pm_put; } fence = etnaviv_gpu_fence_alloc(gpu); if (!fence) { event_free(gpu, event); ret = -ENOMEM; - goto out_unlock; + goto out_pm_put; } + mutex_lock(&gpu->lock); + gpu->event[event].fence = fence; submit->fence = fence->seqno; gpu->active_fence = submit->fence; @@ -1395,9 +1395,9 @@ int etnaviv_gpu_submit(struct etnaviv_gpu *gpu, hangcheck_timer_reset(gpu); ret = 0; -out_unlock: mutex_unlock(&gpu->lock); +out_pm_put: etnaviv_gpu_pm_put(gpu); return ret; -- cgit v1.2.3 From 802934b2cfde463b72cc1b9bc1c081895a90be53 Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Fri, 5 Aug 2016 12:29:06 -0400 Subject: dm round robin: do not use this_cpu_ptr() without having preemption disabled Use local_irq_save() to disable preemption before calling this_cpu_ptr(). Reported-by: Benjamin Block Fixes: b0b477c7e0dd ("dm round robin: use percpu 'repeat_count' and 'current_path'") Cc: stable@vger.kernel.org # 4.6+ Suggested-by: Jens Axboe Signed-off-by: Mike Snitzer --- drivers/md/dm-round-robin.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/md/dm-round-robin.c b/drivers/md/dm-round-robin.c index 4ace1da17db8..6c25213ab38c 100644 --- a/drivers/md/dm-round-robin.c +++ b/drivers/md/dm-round-robin.c @@ -210,14 +210,17 @@ static struct dm_path *rr_select_path(struct path_selector *ps, size_t nr_bytes) struct path_info *pi = NULL; struct dm_path *current_path = NULL; + local_irq_save(flags); current_path = *this_cpu_ptr(s->current_path); if (current_path) { percpu_counter_dec(&s->repeat_count); - if (percpu_counter_read_positive(&s->repeat_count) > 0) + if (percpu_counter_read_positive(&s->repeat_count) > 0) { + local_irq_restore(flags); return current_path; + } } - spin_lock_irqsave(&s->lock, flags); + spin_lock(&s->lock); if (!list_empty(&s->valid_paths)) { pi = list_entry(s->valid_paths.next, struct path_info, list); list_move_tail(&pi->list, &s->valid_paths); -- cgit v1.2.3 From 0a83df6c8cacafbefc5b56b2fbcb92b0d75b744b Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Fri, 15 Jul 2016 17:30:20 -0400 Subject: dm crypt: increase mempool reserve to better support swapping Increase mempool size from 16 to 64 entries. This increase improves swap on dm-crypt performance. When swapping to dm-crypt, all available memory is temporarily exhausted and dm-crypt can only use the mempool reserve. Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer --- drivers/md/dm-crypt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c index 4e9784b4e0ac..eedba67b0e3e 100644 --- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -181,7 +181,7 @@ struct crypt_config { u8 key[0]; }; -#define MIN_IOS 16 +#define MIN_IOS 64 static void clone_init(struct dm_crypt_io *, struct bio *); static void kcryptd_queue_crypt(struct dm_crypt_io *io); -- cgit v1.2.3 From add125054b8727103631dce116361668436ef6a7 Mon Sep 17 00:00:00 2001 From: Gavin Li Date: Fri, 12 Aug 2016 00:52:56 -0700 Subject: cdc-acm: fix wrong pipe type on rx interrupt xfers This fixes the "BOGUS urb xfer" warning logged by usb_submit_urb(). Signed-off-by: Gavin Li Acked-by: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 5 ++--- drivers/usb/class/cdc-acm.h | 1 - 2 files changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 71912301ef7f..0f3f62e81e5b 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1354,7 +1354,6 @@ made_compressed_probe: spin_lock_init(&acm->write_lock); spin_lock_init(&acm->read_lock); mutex_init(&acm->mutex); - acm->rx_endpoint = usb_rcvbulkpipe(usb_dev, epread->bEndpointAddress); acm->is_int_ep = usb_endpoint_xfer_int(epread); if (acm->is_int_ep) acm->bInterval = epread->bInterval; @@ -1394,14 +1393,14 @@ made_compressed_probe: urb->transfer_dma = rb->dma; if (acm->is_int_ep) { usb_fill_int_urb(urb, acm->dev, - acm->rx_endpoint, + usb_rcvintpipe(usb_dev, epread->bEndpointAddress), rb->base, acm->readsize, acm_read_bulk_callback, rb, acm->bInterval); } else { usb_fill_bulk_urb(urb, acm->dev, - acm->rx_endpoint, + usb_rcvbulkpipe(usb_dev, epread->bEndpointAddress), rb->base, acm->readsize, acm_read_bulk_callback, rb); diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h index 05ce308d5d2a..1f1eabfd8462 100644 --- a/drivers/usb/class/cdc-acm.h +++ b/drivers/usb/class/cdc-acm.h @@ -96,7 +96,6 @@ struct acm { struct acm_rb read_buffers[ACM_NR]; struct acm_wb *putbuffer; /* for acm_tty_put_char() */ int rx_buflimit; - int rx_endpoint; spinlock_t read_lock; int write_used; /* number of non-empty write buffers */ int transmitting; -- cgit v1.2.3 From f6b6a28e2dbc401416ff12f775d75281c9b41918 Mon Sep 17 00:00:00 2001 From: Gabriel Krisman Bertazi Date: Fri, 29 Jul 2016 16:15:18 -0300 Subject: nvme: Prevent controller state invalid transition Acquiring the nvme_ctrl lock before reading ctrl->state in nvme_change_ctrl_state() should prevent a theoretical invalid state transition, in the event of two threads racing inside that function. I haven't been able to observe this happening with the current code, and the current state machine seems to be simple enough to not be affected by these invalid transitions, but future modifications could make it more likely to happen. Signed-off-by: Gabriel Krisman Bertazi Reviewed-by: Sagi Grimberg Reviewed-by: Steve Wise Signed-off-by: Jens Axboe --- drivers/nvme/host/core.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 7ff2e820bbf4..7f75d661237f 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -81,10 +81,12 @@ EXPORT_SYMBOL_GPL(nvme_cancel_request); bool nvme_change_ctrl_state(struct nvme_ctrl *ctrl, enum nvme_ctrl_state new_state) { - enum nvme_ctrl_state old_state = ctrl->state; + enum nvme_ctrl_state old_state; bool changed = false; spin_lock_irq(&ctrl->lock); + + old_state = ctrl->state; switch (new_state) { case NVME_CTRL_LIVE: switch (old_state) { @@ -140,11 +142,12 @@ bool nvme_change_ctrl_state(struct nvme_ctrl *ctrl, default: break; } - spin_unlock_irq(&ctrl->lock); if (changed) ctrl->state = new_state; + spin_unlock_irq(&ctrl->lock); + return changed; } EXPORT_SYMBOL_GPL(nvme_change_ctrl_state); -- cgit v1.2.3 From 49a7f01064a94c4fd6afb6b4f7e3ccc37d0edf99 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Sat, 13 Aug 2016 01:12:10 -0300 Subject: perf jitdump: Add the right header to get the major()/minor() definitions Noticed on Fedora Rawhide: $ gcc --version gcc (GCC) 6.1.1 20160721 (Red Hat 6.1.1-4) $ rpm -q glibc glibc-2.24.90-1.fc26.x86_64 $ CC /tmp/build/perf/util/jitdump.o util/jitdump.c: In function 'jit_repipe_code_load': util/jitdump.c:428:2: error: '__major_from_sys_types' is deprecated: In the GNU C Library, `major' is defined by . For historical compatibility, it is currently defined by as well, but we plan to remove this soon. To use `major', include directly. If you did not intend to use a system-defined macro `major', you should #undef it after including . [-Werror=deprecated-declarations] event->mmap2.maj = major(st.st_dev); ^~~~~ In file included from /usr/include/features.h:397:0, from /usr/include/sys/types.h:25, from util/jitdump.c:1: /usr/include/sys/sysmacros.h:87:1: note: declared here __SYSMACROS_DEFINE_MAJOR (__SYSMACROS_FST_IMPL_TEMPL) Fix it following that recomendation. Cc: Adrian Hunter Cc: David Ahern Cc: Jiri Olsa Cc: Namhyung Kim Cc: Stephane Eranian Cc: Wang Nan Link: http://lkml.kernel.org/n/tip-3majvd0adhfr25rvx4v5e9te@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/jitdump.c | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/perf/util/jitdump.c b/tools/perf/util/jitdump.c index 9f3305f6b6d5..95f0884aae02 100644 --- a/tools/perf/util/jitdump.c +++ b/tools/perf/util/jitdump.c @@ -1,3 +1,4 @@ +#include #include #include #include -- cgit v1.2.3 From 34276bb062b8449b3b0a208c9b848a1a27920075 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Mon, 15 Aug 2016 14:58:43 +0200 Subject: of: fix reference counting in of_graph_get_endpoint_by_regs The called of_graph_get_next_endpoint() already decrements the refcount of the prev node, so it is wrong to do it again in the calling function. Use the for_each_endpoint_of_node() helper to interate through the endpoint OF nodes, which already does the right thing and simplifies the code a bit. Fixes: 8ccd0d0ca041 (of: add helper for getting endpoint node of specific identifiers) Cc: stable@vger.kernel.org Reported-by: David Jander Signed-off-by: Lucas Stach Acked-by: Philipp Zabel Signed-off-by: Rob Herring --- drivers/of/base.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) diff --git a/drivers/of/base.c b/drivers/of/base.c index cb255a07baa0..3ce69536a7b3 100644 --- a/drivers/of/base.c +++ b/drivers/of/base.c @@ -2342,20 +2342,13 @@ struct device_node *of_graph_get_endpoint_by_regs( const struct device_node *parent, int port_reg, int reg) { struct of_endpoint endpoint; - struct device_node *node, *prev_node = NULL; - - while (1) { - node = of_graph_get_next_endpoint(parent, prev_node); - of_node_put(prev_node); - if (!node) - break; + struct device_node *node = NULL; + for_each_endpoint_of_node(parent, node) { of_graph_parse_endpoint(node, &endpoint); if (((port_reg == -1) || (endpoint.port == port_reg)) && ((reg == -1) || (endpoint.id == reg))) return node; - - prev_node = node; } return NULL; -- cgit v1.2.3 From 88ded4d8d94a550624e1827478e13fecf97a7b0a Mon Sep 17 00:00:00 2001 From: He Kuang Date: Thu, 4 Aug 2016 11:25:42 +0000 Subject: perf script: Show proper message when failed list scripts Perf shows the usage message when perf scripts folder failed to open, which misleads users to let them think the command is being mistyped. This patch shows a proper message and guides users to check the PERF_EXEC_PATH environment variable in that case. Before: $ perf script --list Usage: perf script [] or: perf script [] record