summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)AuthorFilesLines
2018-07-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds7-10/+36
Pull networking fixes from David Miller: 1) Verify netlink attributes properly in nf_queue, from Eric Dumazet. 2) Need to bump memory lock rlimit for test_sockmap bpf test, from Yonghong Song. 3) Fix VLAN handling in lan78xx driver, from Dave Stevenson. 4) Fix uninitialized read in nf_log, from Jann Horn. 5) Fix raw command length parsing in mlx5, from Alex Vesker. 6) Cleanup loopback RDS connections upon netns deletion, from Sowmini Varadhan. 7) Fix regressions in FIB rule matching during create, from Jason A. Donenfeld and Roopa Prabhu. 8) Fix mpls ether type detection in nfp, from Pieter Jansen van Vuuren. 9) More bpfilter build fixes/adjustments from Masahiro Yamada. 10) Fix XDP_{TX,REDIRECT} flushing in various drivers, from Jesper Dangaard Brouer. 11) fib_tests.sh file permissions were broken, from Shuah Khan. 12) Make sure BH/preemption is disabled in data path of mac80211, from Denis Kenzior. 13) Don't ignore nla_parse_nested() return values in nl80211, from Johannes berg. 14) Properly account sock objects ot kmemcg, from Shakeel Butt. 15) Adjustments to setting bpf program permissions to read-only, from Daniel Borkmann. 16) TCP Fast Open key endianness was broken, it always took on the host endiannness. Whoops. Explicitly make it little endian. From Yuching Cheng. 17) Fix prefix route setting for link local addresses in ipv6, from David Ahern. 18) Potential Spectre v1 in zatm driver, from Gustavo A. R. Silva. 19) Various bpf sockmap fixes, from John Fastabend. 20) Use after free for GRO with ESP, from Sabrina Dubroca. 21) Passing bogus flags to crypto_alloc_shash() in ipv6 SR code, from Eric Biggers. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (87 commits) qede: Adverstise software timestamp caps when PHC is not available. qed: Fix use of incorrect size in memcpy call. qed: Fix setting of incorrect eswitch mode. qed: Limit msix vectors in kdump kernel to the minimum required count. ipvlan: call dev_change_flags when ipvlan mode is reset ipv6: sr: fix passing wrong flags to crypto_alloc_shash() net: fix use-after-free in GRO with ESP tcp: prevent bogus FRTO undos with non-SACK flows bpf: sockhash, add release routine bpf: sockhash fix omitted bucket lock in sock_close bpf: sockmap, fix smap_list_map_remove when psock is in many maps bpf: sockmap, fix crash when ipv6 sock is added net: fib_rules: bring back rule_exists to match rule during add hv_netvsc: split sub-channel setup into async and sync net: use dev_change_tx_queue_len() for SIOCSIFTXQLEN atm: zatm: Fix potential Spectre v1 s390/qeth: consistently re-enable device features s390/qeth: don't clobber buffer on async TX completion s390/qeth: avoid using is_multicast_ether_addr_64bits on (u8 *)[6] s390/qeth: fix race when setting MAC address ...
2018-07-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller6-10/+36
Daniel Borkmann says: ==================== pull-request: bpf 2018-07-01 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) A bpf_fib_lookup() helper fix to change the API before freeze to return an encoding of the FIB lookup result and return the nexthop device index in the params struct (instead of device index as return code that we had before), from David. 2) Various BPF JIT fixes to address syzkaller fallout, that is, do not reject progs when set_memory_*() fails since it could still be RO. Also arm32 JIT was not using bpf_jit_binary_lock_ro() API which was an issue, and a memory leak in s390 JIT found during review, from Daniel. 3) Multiple fixes for sockmap/hash to address most of the syzkaller triggered bugs. Usage with IPv6 was crashing, a GPF in bpf_tcp_close(), a missing sock_map_release() routine to hook up to callbacks, and a fix for an omitted bucket lock in sock_close(), from John. 4) Two bpftool fixes to remove duplicated error message on program load, and another one to close the libbpf object after program load. One additional fix for nfp driver's BPF offload to avoid stopping offload completely if replace of program failed, from Jakub. 5) Couple of BPF selftest fixes that bail out in some of the test scripts if the user does not have the right privileges, from Jeffrin. 6) Fixes in test_bpf for s390 when CONFIG_BPF_JIT_ALWAYS_ON is set where we need to set the flag that some of the test cases are expected to fail, from Kleber. 7) Fix to detangle BPF_LIRC_MODE2 dependency from CONFIG_CGROUP_BPF since it has no relation to it and lirc2 users often have configs without cgroups enabled and thus would not be able to use it, from Sean. 8) Fix a selftest failure in sockmap by removing a useless setrlimit() call that would set a too low limit where at the same time we are already including bpf_rlimit.h that does the job, from Yonghong. 9) Fix BPF selftest config with missing missing NET_SCHED, from Anders. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-30Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds1-23/+36
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "The biggest diffstat comes from self-test updates, plus there's entry code fixes, 5-level paging related fixes, console debug output fixes, and misc fixes" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Clean up the printk()s in show_fault_oops() x86/mm: Drop unneeded __always_inline for p4d page table helpers x86/efi: Fix efi_call_phys_epilog() with CONFIG_X86_5LEVEL=y selftests/x86/sigreturn: Do minor cleanups selftests/x86/sigreturn/64: Fix spurious failures on AMD CPUs x86/entry/64/compat: Fix "x86/entry/64/compat: Preserve r8-r11 in int $0x80" x86/mm: Don't free P4D table when it is folded at runtime x86/entry/32: Add explicit 'l' instruction suffix x86/mm: Get rid of KERN_CONT in show_fault_oops()
2018-06-30Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds21-21/+200
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Tooling fixes mostly, plus a build warning fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits) perf/core: Move inline keyword at the beginning of declaration tools/headers: Pick up latest kernel ABIs perf tools: Fix crash caused by accessing feat_ops[HEADER_LAST_FEATURE] perf script: Fix crash because of missing evsel->priv perf script: Add missing output fields in a hint perf bench: Fix numa report output code perf stat: Remove duplicate event counting perf alias: Rebuild alias expression string to make it comparable perf alias: Remove trailing newline when reading sysfs files perf tools: Fix a clang 7.0 compilation error tools include uapi: Synchronize bpf.h with the kernel tools include uapi: Update if_link.h to pick IFLA_{BRPORT_ISOLATED,VXLAN_TTL_INHERIT} tools include powerpc: Update arch/powerpc/include/uapi/asm/unistd.h copy to get 'rseq' syscall perf tools: Update x86's syscall_64.tbl, adding 'io_pgetevents' and 'rseq' tools headers uapi: Synchronize drm/drm.h perf intel-pt: Fix packet decoding of CYC packets perf tests: Add valid callback for parse-events test perf tests: Add event parsing error handling to parse events test perf report powerpc: Fix crash if callchain is empty perf test session topology: Fix test on s390 ...
2018-06-30Merge tag 'for-linus-20180629' of git://git.kernel.dk/linux-blockLinus Torvalds1-18/+0
Pull block fixes from Jens Axboe: "Small set of fixes for this series. Mostly just minor fixes, the only oddball in here is the sg change. The sg change came out of the stall fix for NVMe, where we added a mempool and limited us to a single page allocation. CONFIG_SG_DEBUG sort-of ruins that, since we'd need to account for that. That's actually a generic problem, since lots of drivers need to allocate SG lists. So this just removes support for CONFIG_SG_DEBUG, which I added back in 2007 and to my knowledge it was never useful. Anyway, outside of that, this pull contains: - clone of request with special payload fix (Bart) - drbd discard handling fix (Bart) - SATA blk-mq stall fix (me) - chunk size fix (Keith) - double free nvme rdma fix (Sagi)" * tag 'for-linus-20180629' of git://git.kernel.dk/linux-block: sg: remove ->sg_magic member drbd: Fix drbd_request_prepare() discard handling blk-mq: don't queue more if we get a busy return block: Fix cloning of requests with a special payload nvme-rdma: fix possible double free of controller async event buffer block: Fix transfer when chunk sectors exceeds max
2018-06-29sg: remove ->sg_magic memberJens Axboe1-18/+0
This was introduced more than a decade ago when sg chaining was added, but we never really caught anything with it. The scatterlist entry size can be critical, since drivers allocate it, so remove the magic member. Recently it's been triggering allocation stalls and failures in NVMe. Tested-by: Jordan Glover <Golden_Miller83@protonmail.ch> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-28selftests/net: Fix permissions for fib_tests.shShuah Khan1-0/+0
fib_tests.sh became non-executable at some point. This is what happens: selftests: net: fib_tests.sh: Warning: file fib_tests.sh is not executable, correct this. not ok 1..11 selftests: net: fib_tests.sh [FAIL] Fixes: d69faad76584 ("selftests: fib_tests: Add prefix route tests with metric") Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-27selftests/x86/sigreturn: Do minor cleanupsAndy Lutomirski1-6/+7
We have short names for the requested and resulting register values. Use them instead of spelling out the whole register entry for each case. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/bb3bc1f923a2f6fe7912d22a1068fe29d6033d38.1530076529.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-06-27selftests/x86/sigreturn/64: Fix spurious failures on AMD CPUsAndy Lutomirski1-17/+29
When I wrote the sigreturn test, I didn't realize that AMD's busted IRET behavior was different from Intel's busted IRET behavior: On AMD CPUs, the CPU leaks the high 32 bits of the kernel stack pointer to certain userspace contexts. Gee, thanks. There's very little the kernel can do about it. Modify the test so it passes. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/86e7fd3564497f657de30a36da4505799eebef01.1530076529.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-06-26selftests: bpf: notification about privilege required to run ↵Jeffrin Jose T1-0/+9
test_lwt_seg6local.sh testing script This test needs root privilege for it's successful execution. This patch is atleast used to notify the user about the privilege the script demands for the smooth execution of the test. Signed-off-by: Jeffrin Jose T (Rajagiri SET) <ahiliation@gmail.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-06-26selftests: bpf: notification about privilege required to run ↵Jeffrin Jose T1-0/+9
test_lirc_mode2.sh testing script The test_lirc_mode2.sh script require root privilege for the successful execution of the test. This patch is to notify the user about the privilege the script demands for the successful execution of the test. Signed-off-by: Jeffrin Jose T (Rajagiri SET) <ahiliation@gmail.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-06-26selftests: bpf: add missing NET_SCHED to configAnders Roxell1-0/+1
CONFIG_NET_SCHED wasn't enabled in arm64's defconfig only for x86. So bpf/test_tunnel.sh tests fails with: RTNETLINK answers: Operation not supported RTNETLINK answers: Operation not supported We have an error talking to the kernel, -1 Enable NET_SCHED and more tests pass. Fixes: 3bce593ac06b ("selftests: bpf: config: add config fragments") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-06-26tools/headers: Pick up latest kernel ABIsIngo Molnar5-0/+6
Sync KVM ABI additions and x86 CPU features additions - neither of which has any impact on the tooling build. Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-06-26Merge tag 'perf-urgent-for-mingo-4.18-20180625' of ↵Ingo Molnar16-21/+194
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: perf bench: (Jiri Olsa): - Fix NUMA report output code handling of less than 1s runtimes. perf script: (Ravi Bangoria) - Add missing output fields in a 'perf script -h' hint. - Fix crash because of missing evsel->priv. - Fix crash caused by accessing feat_ops[HEADER_LAST_FEATURE], which is just a end of features header marker. perf stat: (Thomas Richter) - Remove duplicate event counting perf test: - Wire parsing error handling in 'parse events' test (Jiri Olsa) - Fix 'session topology' test on s/390 (Thomas Richter) eBPF: (Yonghong Song) - Fix a clang 7.0 compilation error when building perf linking with libclang intel-pt: (Adrian Hunter) - Fix packet decoding of CYC packets. Copies of kernel files: (Arnaldo Carvalho de Melo) - Synchronize drm/drm.h UAPI - Update x86's syscall_64.tbl, adding support for 'io_pgetevents' and 'rseq' in 'perf trace'. - Update powerpc uapi/asm/unistd.h, adding support for the 'rseq' syscall. - Update if_link.h and bpf.h, no effect on tool features. PowerPC: (Sandipan Das) - Fix crash if callchain is empty. s/390: (Thomas Richter) - Support random socked_id assignment in the perf header. - Support s390 random socket_id assignment in perf.data file. - Make PMU alias definitions taken from sysfs and JSON files comparable by normalizing them wrt spaces and newlines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-06-25perf tools: Fix crash caused by accessing feat_ops[HEADER_LAST_FEATURE]Ravi Bangoria4-4/+23
perf_event__process_feature() accesses feat_ops[HEADER_LAST_FEATURE] which is not defined and thus perf is crashing. HEADER_LAST_FEATURE is used as an end marker for the perf report but it's unused for perf script/annotate. Ignore HEADER_LAST_FEATURE for perf script/annotate, just like it is done in 'perf report'. Before: # perf record -o - ls | perf script <SNIP 'ls' output> Segmentation fault (core dumped) # After: # perf record -o - ls | perf script <SNIP 'ls' output> Segmentation fault (core dumped) ls 7031 4392.099856: 250000 cpu-clock:uhH: 7f5e0ce7cd60 ls 7031 4392.100355: 250000 cpu-clock:uhH: 7f5e0c706ef7 # Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: David Carrillo-Cisneros <davidcc@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: 57b5de463925 ("perf report: Support forced leader feature in pipe mode") Link: http://lkml.kernel.org/r/20180625124220.6434-4-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-06-25perf script: Fix crash because of missing evsel->privRavi Bangoria1-0/+14
'perf script' in piped mode is crashing because evsel->priv is not set properly. Fix it. Before: # perf record -o - -- ls | perf script <SNIP 'ls' output> Segmentation fault (core dumped) # After: # perf record -o - -- ls | perf script <SNIP 'ls' output> ls 2282 1031.731974: 250000 cpu-clock:uhH: 7effe4b3d29e ls 2282 1031.732222: 250000 cpu-clock:uhH: 7effe4b3a650 # Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: David Carrillo-Cisneros <davidcc@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: a14390fde64e ("perf script: Allow creating per-event dump files") Link: http://lkml.kernel.org/r/20180625124220.6434-3-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-06-25perf script: Add missing output fields in a hintRavi Bangoria1-2/+3
A few fields are missing in a perf script -F hint. Add them. Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: David Carrillo-Cisneros <davidcc@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20180625124220.6434-2-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-06-25perf bench: Fix numa report output codeJiri Olsa1-2/+3
Currently we can hit following assert when running numa bench: $ perf bench numa mem -p 3 -t 1 -P 512 -s 100 -zZ0cm --thp 1 perf: bench/numa.c:1577: __bench_numa: Assertion `!(!(((wait_stat) & 0x7f) == 0))' failed. The assertion is correct, because we hit the SIGFPE in following line: Thread 2.2 "thread 0/0" received signal SIGFPE, Arithmetic exception. [Switching to Thread 0x7fffd28c6700 (LWP 11750)] 0x000.. in worker_thread (__tdata=0x7.. ) at bench/numa.c:1257 1257 td->speed_gbs = bytes_done / (td->runtime_ns / NSEC_PER_SEC) / 1e9; We don't check if the runtime is actually bigger than 1 second, and thus this might end up with zero division within FPU. Adding the check to prevent this. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180620094036.17278-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-06-25perf stat: Remove duplicate event countingThomas Richter1-1/+70
'perf stat' shows a mismatch in perf stat regarding counter names on s390: Run command: [root@s35lp76 perf]# ./perf stat -e tx_nc_tend -v -- ~/mytesttx 1 >/tmp/111 tx_nc_tend: 1 573146 573146 tx_nc_tend: 1 573146 573146 Performance counter stats for '/root/mytesttx 1': 3 tx_nc_tend 0.001037252 seconds time elapsed [root@s35lp76 perf]# shows transaction counter tx_nc_tend with value 3 but it was triggered only once as seen by the output of mytesttx. When looking up the event name tx_nc_tend the following function sequence is called: parse_events_multi_pmu_add() +--> perf_pmu__scan() being called with NULL argument +--> pmu_read_sysfs() scans directory ../devices/ for all PMUs +--> perf_pmu__find() tries to find a PMU in the global pmu list. +--> pmu_lookup() called to read all file entries when not in global list. pmu_lookup() causes the issue. It calls +---> pmu_aliases() to read all the entries in the PMU directory. On s390 this is named /sys/devices/cpum_cf/events. +--> pmu_aliases_parse() reads all files and creates an alias for each file name. So we end up with first entry created by reading the sysfs file [root@s35lp76 perf]# cat /sys/devices/cpum_cf /events/TX_NC_TEND event=0x008d [root@s35lp76 perf]# Debug output shows this entry tx_nc_tend -> 'cpum_cf'/'event=0x008d '/ After all files in this directory have been read and aliases created this function is called: +--> pmu_add_cpu_aliases() This function looks up the CPU tables created by the json files. With json files for s390 now available all the aliases are added to the PMU alias list a second time. The second entry is added by reading the json file converted by jevent resulting in file pmu-events/pmu-events.c: { .name = "tx_nc_tend", .event = "event=0x8d", .desc = "Unit: cpum_cf Completed TEND \ instructions \ in non-constrained TX mode", .topic = "extended", .long_desc = "A TEND instruction has \ completed in a \ non-constrained \ transactional-execution mode", .pmu = "cpum_cf", }, Debug output shows this entry tx_nc_tend -> 'cpum_cf'/'event=0x8d'/ Function pmu_aliases_parse() and pmu_add_cpu_aliases() both use __perf_pmu__new_alias() to add an alias to the PMU alias list. There is no check if an alias already exist So we end up with 2 entries for tx_nc_tend in the PMU alias list. Having set up the PMU alias list for this PMU now parse_events_multi_add_pmu() reads the complete alias list and adds each alias with parse_events_add_pmu() to the global perfev_list. This causes the alias to be added multiple times to the event list. Fix this by making __perf_pmu__new_alias() to merge alias definitions if an alias is already on the alias list. Also print a debug message when the alias has mismatches in some fields. Output before: [root@s35lp76 perf]# ./perf stat -e tx_nc_tend -v \ -- ~/mytesttx 1 >/tmp/111 tx_nc_tend: 1 551446 551446 Performance counter stats for '/root/mytesttx 1': 3 tx_nc_tend 0.000961134 seconds time elapsed [root@s35lp76 perf]# Output after: [root@s35lp76 perf]# ./perf stat -e tx_nc_tend -v \ -- ~/mytesttx 1 >/tmp/111 tx_nc_tend: 1 551446 551446 Performance counter stats for '/root/mytesttx 1': 1 tx_nc_tend 0.000961134 seconds time elapsed [root@s35lp76 perf]# Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Reviewed-by: Jiri Olsa <jolsa@redhat.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180615101105.47047-3-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-06-25perf alias: Rebuild alias expression string to make it comparableThomas Richter1-1/+24
PMU alias definitions in sysfs files may have spaces, newlines and numbers with leading zeroes. Some alias definitions may also appear in JSON files without spaces, etc. Scan alias definitions and remove leading zeroes, spaces, newlines, etc and rebuild string to make alias->str member comparable. s390 for example has terms specified as event=0x0091 (read from files ../<PMU>/events/<FILE> and terms specified as event=0x91 (read from JSON files). Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180615101105.47047-2-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-06-25perf alias: Remove trailing newline when reading sysfs filesThomas Richter1-0/+3
Remove a trailing newline when reading sysfs file contents such as /sys/devices/cpum_cf/events/TX_NC_TEND. This shows when verbose option -v is used. Output before: tx_nc_tend -> 'cpum_cf'/'event=0x008d '/ Output after: tx_nc_tend -> 'cpum_cf'/'event=0x8d'/ Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180615101105.47047-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-06-25perf tools: Fix a clang 7.0 compilation errorYonghong Song1-2/+9
Arnaldo reported the perf build failure with latest llvm/clang compiler (7.0). $ make LIBCLANGLLVM=1 -C tools/perf/ <SNIP> CC /tmp/tmp.t53Qo38zci/tests/kmod-path.o util/c++/clang.cpp: In function ‘std::unique_ptr<llvm::SmallVectorImpl<char> > perf::getBPFObjectFromModule(llvm::Module*)’: util/c++/clang.cpp:150:43: error: no matching function for call to ‘llvm::TargetMachine::addPassesToEmitFile(llvm::legacy::PassManager&, llvm::raw_svector_ostream&, llvm::TargetMachine::CodeGenFileType)’ TargetMachine::CGFT_ObjectFile)) { ^ In file included from util/c++/clang.cpp:25:0: /usr/local/include/llvm/Target/TargetMachine.h:254:16: note: candidate: virtual bool llvm::TargetMachine::addPassesToEmitFile( llvm::legacy::PassManagerBase&, llvm::raw_pwrite_stream&, llvm::raw_pwrite_stream*, llvm::TargetMachine::CodeGenFileType, bool, llvm::MachineModuleInfo*) virtual bool addPassesToEmitFile(PassManagerBase &, raw_pwrite_stream &, ^~~~~~~~~~~~~~~~~~~ /usr/local/include/llvm/Target/TargetMachine.h:254:16: note: candidate expects 6 arguments, 3 provided mv: cannot stat '/tmp/tmp.t53Qo38zci/util/c++/.clang.o.tmp': No such file or directory make[7]: *** [/home/acme/git/perf/tools/build/Makefile.build:101: /tmp/tmp.t53Qo38zci/util/c++/clang.o] Error 1 make[6]: *** [/home/acme/git/perf/tools/build/Makefile.build:139: c++] Error 2 make[5]: *** [/home/acme/git/perf/tools/build/Makefile.build:139: util] Error 2 make[5]: *** Waiting for unfinished jobs.... CC /tmp/tmp.t53Qo38zci/tests/thread-map.o The function addPassesToEmitFile signature changed in llvm 7.0 and such a change caused the failure. This patch fixed the issue with using proper function signatures under different compiler versions. Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Yonghong Song <yhs@fb.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/20180616174739.1076733-1-yhs@fb.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-06-25tools include uapi: Synchronize bpf.h with the kernelArnaldo Carvalho de Melo1-1/+1
To pick the rename in: bd3a08aaa9a3 ("bpf: flowlabel in bpf_fib_lookup should be flowinfo") Silencing this build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/bpf.h' differs from latest version at 'include/uapi/linux/bpf.h' Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-zd1sgtbybtjrrt7bqdybu0s0@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-06-25tools include uapi: Update if_link.h to pick ↵Arnaldo Carvalho de Melo1-0/+2
IFLA_{BRPORT_ISOLATED,VXLAN_TTL_INHERIT} The IFLA_BRPORT_ISOLATED and IFLA_VXLAN_TTL_INHERIT defines were added in: 7d850abd5f4e ("net: bridge: add support for port isolation") 72f6d71e491e ("vxlan: add ttl inherit support") Pick them, silencing this build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/if_link.h' differs from latest version at 'include/uapi/linux/if_link.h' Cc: Alexei Starovoitov <ast@kernel.org> Cc: David S. Miller <davem@davemloft.net> Cc: Eric Leblond <eric@regit.org> Cc: Hangbin Liu <liuhangbin@gmail.com> Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Link: https://lkml.kernel.org/n/tip-ezi5u0mmdqm0wfm0y2y8176r@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-06-25tools include powerpc: Update arch/powerpc/include/uapi/asm/unistd.h copy to ↵Arnaldo Carvalho de Melo1-0/+1
get 'rseq' syscall This updates the tools/perf/ copy of the powerpc file used to generate the syscall table file used to make 'perf trace' become aware of the new 'rseq' syscall, no matter in which system it gets built, i.e. older systems where the syscalls are not available in the running kernel (via tracefs) or in the system headers will still be aware of these syscalls/. From this commit: bb862b021d75 ("powerpc: Wire up restartable sequences system call") Silencing this tools/perf build warning: Warning: Kernel ABI header at 'tools/arch/powerpc/include/uapi/asm/unistd.h' differs from latest version at 'arch/powerpc/include/uapi/asm/unistd.h' Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-adtgz6u3apd76tghiu9w0k19@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-06-25perf tools: Update x86's syscall_64.tbl, adding 'io_pgetevents' and 'rseq'Arnaldo Carvalho de Melo1-0/+2
This updates the tools/perf/ copy of the system call table for x86 which makes 'perf trace' become aware of the new 'io_pgetevents' and 'rseq' syscalls, no matter in which system it gets built, i.e. older systems where the syscalls are not available in the running kernel (via tracefs) or in the system headers will still be aware of these syscalls/. These are the csets introducing the source drift: 05c17cedf85b ("x86: Wire up restartable sequence system call") 7a074e96dee6 ("aio: implement io_pgetevents") This results in this build time change: $ diff -u /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c.old /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c --- /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c.old 2018-06-15 11:48:17.648948094 -0300 +++ /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c 2018-06-15 11:48:22.133942480 -0300 @@ -332,5 +332,7 @@ [330] = "pkey_alloc", [331] = "pkey_free", [332] = "statx", + [333] = "io_pgetevents", + [334] = "rseq", }; -#define SYSCALLTBL_x86_64_MAX_ID 332 +#define SYSCALLTBL_x86_64_MAX_ID 334 $ This silences the following tools/perf/ build warning: Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl' Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-tfvyz51sabuzemrszbrhzxni@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-06-25tools headers uapi: Synchronize drm/drm.hArnaldo Carvalho de Melo1-0/+7
To pick up the new ioctls added in these csets: 7595bda2fb43 ("drm: Add DRM client cap for aspect-ratio") The DRM caps are not yet being decoded in 'perf trace', so this sync doesn't incur in any change in behaviour in any tools, just silencing this tools/perf/ build warning: Warning: Kernel ABI header at 'tools/include/uapi/drm/drm.h' differs from latest version at 'include/uapi/drm/drm.h' Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-atwz0arwanq1npu8pptwkoxt@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-06-25perf intel-pt: Fix packet decoding of CYC packetsAdrian Hunter1-1/+1
Use a 64-bit type so that the cycle count is not limited to 32-bits. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1528371002-8862-1-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-06-25perf tests: Add valid callback for parse-events testJiri Olsa1-2/+15
Adding optional 'valid' callback for events tests in parse-events object, so we don't try to parse PMUs, which are not supported. Following line is displayed for skipped test: running test 52 'intel_pt//u'... SKIP Committer note: Use named initializers in the struct evlist_test variable to avoid breaking the build on centos:5, 6 and others with a similar gcc: cc1: warnings being treated as errors tests/parse-events.c: In function 'test_pmu_events': tests/parse-events.c:1817: error: missing initializer tests/parse-events.c:1817: error: (near initialization for 'e.type') Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Kim Phillips <kim.phillips@arm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Richter <tmricht@linux.ibm.com> Link: http://lkml.kernel.org/r/20180611093422.1005-2-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-06-25perf tests: Add event parsing error handling to parse events testJiri Olsa1-3/+5
Add missing error handling for parse_events calls in test_event function that led to following segfault on s390: running test 52 'intel_pt//u' perf: Segmentation fault ... /lib64/libc.so.6(vasprintf+0xe6) [0x3fffca3f106] /lib64/libc.so.6(asprintf+0x46) [0x3fffca1aa96] ./perf(parse_events_add_pmu+0xb8) [0x80132088] ./perf(parse_events_parse+0xc62) [0x8019529a] ./perf(parse_events+0x98) [0x801341c0] ./perf(test__parse_events+0x48) [0x800cd140] ./perf(cmd_test+0x26a) [0x800bd44a] test child interrupted Adding the struct parse_events_error argument to parse_events call. Also adding parse_events_print_error to get more details on the parsing failures, like: # perf test 6 -v running test 52 'intel_pt//u'failed to parse event 'intel_pt//u', err 1, str 'Cannot find PMU `intel_pt'. Missing kernel support?' event syntax error: 'intel_pt//u' \___ Cannot find PMU `intel_pt'. Missing kernel support? Committer note: Use named initializers in the struct parse_events_error variable to avoid breaking the build on centos5, 6 and others with a similar gcc: cc1: warnings being treated as errors tests/parse-events.c: In function 'test_event': tests/parse-events.c:1696: error: missing initializer tests/parse-events.c:1696: error: (near initialization for 'err.str') Reported-by: Kim Phillips <kim.phillips@arm.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Kim Phillips <kim.phillips@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Richter <tmricht@linux.ibm.com> Link: http://lkml.kernel.org/r/20180611093422.1005-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-06-25perf report powerpc: Fix crash if callchain is emptySandipan Das1-1/+1
For some cases, the callchain provided by the kernel may be empty. So, the callchain ip filtering code will cause a crash if we do not check whether the struct ip_callchain pointer is NULL before accessing any members. This can be observed on a powerpc64le system running Fedora 27 as shown below. # perf record -b -e cycles:u ls Before: # perf report --branch-history perf: Segmentation fault -------- backtrace -------- perf[0x1027615c] linux-vdso64.so.1(__kernel_sigtramp_rt64+0x0)[0x7fff856304d8] perf(arch_skip_callchain_idx+0x44)[0x10257c58] perf[0x1017f2e4] perf(thread__resolve_callchain+0x124)[0x1017ff5c] perf(sample__resolve_callchain+0xf0)[0x10172788] ... After: # perf report --branch-history Samples: 25 of event 'cycles:u', Event count (approx.): 2306870 Overhead Source:Line Symbol Shared Object + 11.60% _init+35736 [.] _init ls + 9.84% strcoll_l.c:137 [.] __strcoll_l libc-2.26.so + 9.16% memcpy.S:175 [.] __memcpy_power7 libc-2.26.so + 9.01% gconv_charset.h:54 [.] _nl_find_locale libc-2.26.so + 8.87% dl-addr.c:52 [.] _dl_addr libc-2.26.so + 8.83% _init+236 [.] _init ls ... Reported-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Acked-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20180611104049.11048-1-sandipan@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-06-25perf test session topology: Fix test on s390Thomas Richter1-0/+1
On s390 this test case fails because the socket identifiction numbers assigned to the CPU are higher than the CPU identification numbers. F/ix this by adding the platform architecture into the perf data header flag information. This helps identifiing the test platform and handles s390 specifics in process_cpu_topology(). Before: [root@p23lp27 perf]# perf test -vvvvv -F 39 39: Session topology : --- start --- templ file: /tmp/perf-test-iUv755 socket_id number is too big.You may need to upgrade the perf tool. ---- end ---- Session topology: Skip [root@p23lp27 perf]# After: [root@p23lp27 perf]# perf test -vvvvv -F 39 39: Session topology : --- start --- templ file: /tmp/perf-test-8X8VTs CPU 0, core 0, socket 6 CPU 1, core 1, socket 3 ---- end ---- Session topology: Ok [root@p23lp27 perf]# Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Fixes: c84974ed9fb6 ("perf test: Add entry to test cpu topology") Link: http://lkml.kernel.org/r/20180611073153.15592-2-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-06-25perf record: Support s390 random socket_id assignmentThomas Richter1-1/+9
On s390 the socket identifier assigned to a CPU identifier is random and (depending on the configuration of the LPAR) may be higher than the CPU identifier. This is currently not supported. Fix this by allowing arbitrary socket identifiers being assigned to CPU id. Output before: [root@p23lp27 perf]# ./perf report --header -I -v ... socket_id number is too big.You may need to upgrade the perf tool. Error: The perf.data file has no samples! # ======== # captured on : Tue May 29 09:29:57 2018 # header version : 1 ... # Core ID and Socket ID information is not available ... [root@p23lp27 perf]# Output after: [root@p23lp27 perf]# ./perf report --header -I -v ... Error: The perf.data file has no samples! # ======== # captured on : Tue May 29 09:29:57 2018 # header version : 1 ... # CPU 0: Core ID 0, Socket ID 6 # CPU 1: Core ID 1, Socket ID 3 # CPU 2: Core ID -1, Socket ID -1 ... [root@p23lp27 perf]# Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180611073153.15592-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-06-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2-0/+3
Pull networking fixes from David Miller: 1) Fix netpoll OOPS in r8169, from Ville Syrjälä. 2) Fix bpf instruction alignment on powerpc et al., from Eric Dumazet. 3) Don't ignore IFLA_MTU attribute when creating new ipvlan links. From Xin Long. 4) Fix use after free in AF_PACKET, from Eric Dumazet. 5) Mis-matched RTNL unlock in xen-netfront, from Ross Lagerwall. 6) Fix VSOCK loopback on big-endian, from Claudio Imbrenda. 7) Missing RX buffer offset correction when computing DMA addresses in mvneta driver, from Antoine Tenart. 8) Fix crashes in DCCP's ccid3_hc_rx_send_feedback, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (34 commits) sfc: make function efx_rps_hash_bucket static strparser: Corrected typo in documentation. qmi_wwan: add support for the Dell Wireless 5821e module cxgb4: when disabling dcb set txq dcb priority to 0 net_sched: remove a bogus warning in hfsc net: dccp: switch rx_tstamp_last_feedback to monotonic clock net: dccp: avoid crash in ccid3_hc_rx_send_feedback() net: Remove depends on HAS_DMA in case of platform dependency MAINTAINERS: Add file patterns for dsa device tree bindings net: mscc: make sparse happy net: mvneta: fix the Rx desc DMA address in the Rx path Documentation: e1000: Fix docs build error Documentation: e100: Fix docs build error Documentation: e1000: Use correct heading adornment Documentation: e100: Use correct heading adornment ipv6: mcast: fix unsolicited report interval after receiving querys vhost_net: validate sock before trying to put its fd VSOCK: fix loopback on big-endian systems net: ethernet: ti: davinci_cpdma: make function cpdma_desc_pool_create static xen-netfront: Update features after registering netdev ...
2018-06-24Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds9-33/+67
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Thomas Gleixner: "A pile of perf updates: Kernel side: - Remove an incorrect warning in uprobe_init_insn() when insn_get_length() fails. The error return code is handled at the call site. - Move the inline keyword to the right place in the perf ringbuffer code to address a W=1 build warning. Tooling: perf stat: - Fix metric column header display alignment - Improve error messages for default attributes, providing better output for error in command line. - Add --interval-clear option, to provide a 'watch' like printing perf script: - Show hw-cache events too perf c2c: - Fix data dependency problem in layout of 'struct c2c_hist_entry' Core: - Do not blindly assume that 'struct perf_evsel' can be obtained via a straight forward container_of() as there are call sites which hand in a plain 'struct hist' which is not part of a container. - Fix error index in the PMU event parser, so that error messages can point to the problematic token" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Move the inline keyword at the beginning of the function declaration uprobes/x86: Remove incorrect WARN_ON() in uprobe_init_insn() perf script: Show hw-cache events perf c2c: Keep struct hist_entry at the end of struct c2c_hist_entry perf stat: Add event parsing error handling to add_default_attributes perf stat: Allow to specify specific metric column len perf stat: Fix metric column header display alignment perf stat: Use only color_fprintf call in print_metric_only perf stat: Add --interval-clear option perf tools: Fix error index for pmu event parser perf hists: Reimplement hists__has_callchains() perf hists browser gtk: Use hist_entry__has_callchains() perf hists: Make hist_entry__has_callchains() work with 'perf c2c' perf hists: Save the callchain_size in struct hist_entry
2018-06-24Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds2-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull rseq fixes from Thomas Gleixer: "A pile of rseq related fixups: - Prevent infinite recursion when delivering SIGSEGV - Remove the abort of rseq critical section on fork() as syscalls inside rseq critical sections are explicitely forbidden. So no point in doing the abort on the child. - Align the rseq structure on 32 bytes in the ARM selftest code. - Fix file permissions of the test script" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rseq: Avoid infinite recursion when delivering SIGSEGV rseq/cleanup: Do not abort rseq c.s. in child on fork() rseq/selftests/arm: Align 'struct rseq_cs' on 32 bytes rseq/selftests: Make run_param_test.sh executable
2018-06-24Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core fixes from Thomas Gleixner: "Two tiny fixes: - Add the missing machine_real_restart() to objtools noreturn list so it stops complaining - Fix a trivial comment typo" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: kernel.h: Fix a typo in comment objtool: Add machine_real_restart() to the noreturn list
2018-06-24Merge tag 'mips_fixes_4.18_1' of ↵Linus Torvalds3-0/+751
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Paul Burton: "A few MIPS fixes for 4.18: - a GPIO device name fix for a regression in v4.15-rc1. - an errata workaround for the BCM5300X platform. - a fix to ftrace function graph tracing, broken for a long time with the fix applying cleanly back as far as v3.17. - addition of read barriers to in{b,w,l,q}() functions, matching behavior of other architectures & mirroring the equivalent addition to read{b,w,l,q} in v4.17-rc2. Plus changes to wire up new syscalls introduced in the 4.18 cycle: - Restartable sequences support is added, including MIPS support in the selftests. - io_pgetevents is wired up" * tag 'mips_fixes_4.18_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: Wire up io_pgetevents syscall rseq/selftests: Implement MIPS support MIPS: Wire up the restartable sequences (rseq) syscall MIPS: Add syscall detection for restartable sequences MIPS: Add support for restartable sequences MIPS: io: Add barrier after register read in inX() mips: ftrace: fix static function graph tracing MIPS: BCM47XX: Enable 74K Core ExternalSync for PCIe erratum MIPS: pb44: Fix i2c-gpio GPIO descriptor table
2018-06-24Merge tag 'linux-kselftest-4.18-rc2' of ↵Linus Torvalds13-27/+79
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: - fix new sparc64 adi driver test compile errors on non-sparc systems - fix config fragment for sync framework for improved test coverage - fix several tests to return correct Kselftest skip code * tag 'linux-kselftest-4.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: sparc64: Add missing SPDX License Identifiers selftests: sparc64: delete RUN_TESTS and EMIT_TESTS overrides selftests: sparc64: Fix to do nothing on non-sparc64 selftests: sync: add config fragment for testing sync framework selftests: vm: return Kselftest Skip code for skipped tests selftests: zram: return Kselftest Skip code for skipped tests selftests: user: return Kselftest Skip code for skipped tests selftests: sysctl: return Kselftest Skip code for skipped tests selftests: static_keys: return Kselftest Skip code for skipped tests selftests: pstore: return Kselftest Skip code for skipped tests
2018-06-22tools/bpf: fix test_sockmap failureYonghong Song1-6/+0
On one of our production test machine, when running bpf selftest test_sockmap, I got the following error: # sudo ./test_sockmap libbpf: failed to create map (name: 'sock_map'): Operation not permitted libbpf: failed to load object 'test_sockmap_kern.o' libbpf: Can't get the 0th fd from program sk_skb1: only -1 instances ...... load_bpf_file: (-1) Operation not permitted ERROR: (-1) load bpf failed The error is due to not-big-enough rlimit struct rlimit r = {10 * 1024 * 1024, RLIM_INFINITY}; The test already includes "bpf_rlimit.h", which sets current and max rlimit to RLIM_INFINITY. Let us just use it. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-06-22selftests: bpf: notification about privilege required to run test_kmod.sh ↵Jeffrin Jose T1-0/+9
testing script The test_kmod.sh script require root privilege for the successful execution of the test. This patch is to notify the user about the privilege the script demands for the successful execution of the test. Signed-off-by: Jeffrin Jose T (Rajagiri SET) <ahiliation@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-06-22tools: bpftool: remember to close the libbpf object after prog loadJakub Kicinski1-1/+7
Remembering to close all descriptors and free memory may not seem important in a user space tool like bpftool, but if we were to run in batch mode the consumed resources start to add up quickly. Make sure program load closes the libbpf object (which unloads and frees it). Fixes: 49a086c201a9 ("bpftool: implement prog load command") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-06-22tools: bpftool: remove duplicated error message on prog loadJakub Kicinski1-3/+1
do_pin_fd() will already print out an error message if something goes wrong. Printing another error is unnecessary and will break JSON output, since error messages are full objects: $ bpftool -jp prog load tracex1_kern.o /sys/fs/bpf/a { "error": "can't pin the object (/sys/fs/bpf/a): File exists" },{ "error": "failed to pin program" } Fixes: 49a086c201a9 ("bpftool: implement prog load command") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-06-21Merge tag 'pm-4.18-rc2' of ↵Linus Torvalds2-75/+167
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These are mostly fixes, including some fixes for changes made during the recent merge window and some "stable" material, plus some minor extensions of the turbostat utility. Specifics: - Fix the PM core to avoid introducing a runtime PM usage counter imbalance when adding device links during driver probe (Rafael Wysocki). - Fix the operating performance points (OPP) framework to ensure that the regulator voltage is always updated as appropriate when updating clock rates (Waldemar Rymarkiewicz). - Fix the intel_pstate driver to use correct max/min limits for cores with differing maximum frequences (Srinivas Pandruvada). - Fix a typo in the intel_pstate driver documentation (Rafael Wysocki). - Fix two issues with the recently added Kryo cpufreq driver (Ilia Lin). - Fix two recent regressions and some other minor issues in the turbostat utility and extend it to provide some more diagnostic information (Len Brown, Nathan Ciobanu)" * tag 'pm-4.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Documentation: intel_pstate: Fix typo tools/power turbostat: version 18.06.20 tools/power turbostat: add the missing command line switches tools/power turbostat: add single character tokens to help tools/power turbostat: alphabetize the help output tools/power turbostat: fix segfault on 'no node' machines tools/power turbostat: add optional APIC X2APIC columns tools/power turbostat: decode cpuid.1.HT tools/power turbostat: fix show/hide issues resulting from mis-merge PM / OPP: Update voltage in case freq == old_freq cpufreq: intel_pstate: Fix scaling max/min limits with Turbo 3.0 cpufreq: kryo: Add module remove and exit cpufreq: kryo: Fix possible error code dereference PM / core: Fix supplier device runtime PM usage counter imbalance
2018-06-21rseq/selftests/arm: Align 'struct rseq_cs' on 32 bytesMathieu Desnoyers1-0/+1
uapi/linux/rseq.h aligns 'struct rseq_cs' on 32 bytes. Satisfy this alignment requirement in its definition within the rseq-arm.h inline assembly as well. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Hunter <ahh@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ben Maurer <bmaurer@fb.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Lameter <cl@linux.com> Cc: Dave Watson <davejwatson@fb.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Paul E . McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-api@vger.kernel.org Cc: linux-kselftest@vger.kernel.org Link: https://lore.kernel.org/lkml/20180619133230.4087-3-mathieu.desnoyers@efficios.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-06-21rseq/selftests: Make run_param_test.sh executableMathieu Desnoyers1-0/+0
The executable bit of the run_param_test.sh script got lost in the merge. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Hunter <ahh@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ben Maurer <bmaurer@fb.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Lameter <cl@linux.com> Cc: Dave Watson <davejwatson@fb.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Paul E . McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Shuah Khan <shuahkh@osg.samsung.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-api@vger.kernel.org Cc: linux-kselftest@vger.kernel.org Link: https://lore.kernel.org/lkml/20180619133230.4087-2-mathieu.desnoyers@efficios.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-06-21selftests: net: add tcp_inq to gitignoreAnders Roxell1-0/+1
sha: 702353b538f5 ("selftest: add test for TCP_INQ") forgot to add tcp_inq to .gitignore. Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-21selftests: net: add config fragmentsAnders Roxell1-0/+2
Add fragments to pass bridge and vlan tests. Fixes: 33b01b7b4f19 ("selftests: add rtnetlink test script") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-21Merge branch 'turbostat' of ↵Rafael J. Wysocki2-75/+167
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull turbostat utility changes for 4.18-rc2 from Len Brown. "This includes two regression fixes, plus a couple more random, but worthy, patches." * 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: version 18.06.20 tools/power turbostat: add the missing command line switches tools/power turbostat: add single character tokens to help tools/power turbostat: alphabetize the help output tools/power turbostat: fix segfault on 'no node' machines tools/power turbostat: add optional APIC X2APIC columns tools/power turbostat: decode cpuid.1.HT tools/power turbostat: fix show/hide issues resulting from mis-merge
2018-06-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds5-17/+40
Pull networking fixes from David Miller: 1) Fix crash on bpf_prog_load() errors, from Daniel Borkmann. 2) Fix ATM VCC memory accounting, from David Woodhouse. 3) fib6_info objects need RCU freeing, from Eric Dumazet. 4) Fix SO_BINDTODEVICE handling for TCP sockets, from David Ahern. 5) Fix clobbered error code in enic_open() failure path, from Govindarajulu Varadarajan. 6) Propagate dev_get_valid_name() error returns properly, from Li RongQing. 7) Fix suspend/resume in davinci_emac driver, from Bartosz Golaszewski. 8) Various act_ife fixes (recursive locking, IDR leaks, etc.) from Davide Caratti. 9) Fix buggy checksum handling in sungem driver, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (40 commits) ip: limit use of gso_size to udp stmmac: fix DMA channel hang in half-duplex mode net: stmmac: socfpga: add additional ocp reset line for Stratix10 net: sungem: fix rx checksum support bpfilter: ignore binary files bpfilter: fix build error net/usb/drivers: Remove useless hrtimer_active check net/sched: act_ife: preserve the action control in case of error net/sched: act_ife: fix recursive lock and idr leak net: ethernet: fix suspend/resume in davinci_emac net: propagate dev_get_valid_name return code enic: do not overwrite error code net/tcp: Fix socket lookups with SO_BINDTODEVICE ptp: replace getnstimeofday64() with ktime_get_real_ts64() net/ipv6: respect rcu grace period before freeing fib6_info net: net_failover: fix typo in net_failover_slave_register() ipvlan: use ETH_MAX_MTU as max mtu net: hamradio: use eth_broadcast_addr enic: initialize enic->rfs_h.lock in enic_probe MAINTAINERS: Add Sam as the maintainer for NCSI ...
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-21 20:24:07 +0300