| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull initial SPDX identifiers from Greg KH:
"License cleanup: add SPDX license identifiers to some files
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the
'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally
binding shorthand, which can be used instead of the full boiler plate
text.
This patch is based on work done by Thomas Gleixner and Kate Stewart
and Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset
of the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to
license had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied
to a file was done in a spreadsheet of side by side results from of
the output of two independent scanners (ScanCode & Windriver)
producing SPDX tag:value files created by Philippe Ombredanne.
Philippe prepared the base worksheet, and did an initial spot review
of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537
files assessed. Kate Stewart did a file by file comparison of the
scanner results in the spreadsheet to determine which SPDX license
identifier(s) to be applied to the file. She confirmed any
determination that was not immediately clear with lawyers working with
the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained
>5 lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that
was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that
became the concluded license(s).
- when there was disagreement between the two scanners (one detected
a license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply
(and which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases,
confirmation by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.
The Windriver scanner is based on an older version of FOSSology in
part, so they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot
checks in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect
the correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial
patch version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch
license was not GPL-2.0 WITH Linux-syscall-note to ensure that the
applied SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
License cleanup: add SPDX license identifier to uapi header files with a license
License cleanup: add SPDX license identifier to uapi header files with no license
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- fix O= building on dash
- remove unused dependency in Makefile
- fix default of a choice in Kconfig
- fix typos and documentation style
- fix command options unrecognized by sparse
* tag 'kbuild-fixes-v4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: clang: fix build failures with sparse check
kbuild doc: a bundle of fixes on makefiles.txt
Makefile: kselftest: fix grammar typo
kbuild: Fix optimization level choice default
kbuild: drop unused symverfile in Makefile.modpost
kbuild: revert $(realpath ...) to $(shell cd ... && /bin/pwd)
|
|
This reverts commit c91fc8519d87715a3a173475ea3778794c139996.
That change caused a C6 and PC6 residency regression on large idle systems.
Users also complained about new output indicating jitter:
turbostat: cpu6 jitter 3794 9142
Signed-off-by: Len Brown <len.brown@intel.com>
Cc: 4.13+ <stable@vger.kernel.org> # v4.13+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
I thought commit 8e9b46679923 ("kbuild: use $(abspath ...) instead of
$(shell cd ... && /bin/pwd)") was a safe conversion, but it changed
the behavior.
$(abspath ...) / $(realpath ...) does not expand shell special
characters, such as '~'.
Here is a simple Makefile example:
---------------->8----------------
$(info /bin/pwd: $(shell cd ~/; /bin/pwd))
$(info abspath: $(abspath ~/))
$(info realpath: $(realpath ~/))
all:
@:
---------------->8----------------
$ make
/bin/pwd: /home/masahiro
abspath: /home/masahiro/workspace/~
realpath:
This can be a real problem if 'make O=~/foo' is invoked from another
Makefile or primitive shell like dash.
This commit partially reverts 8e9b46679923.
Fixes: 8e9b46679923 ("kbuild: use $(abspath ...) instead of $(shell cd ... && /bin/pwd)")
Reported-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Julien Grall <julien.grall@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Use Make-builtin $(abspath ...) helper to get absolute path
- Add W=2 extra warning option to detect unused macros
- Use more KCONFIG_CONFIG instead hard-coded .config
- Fix bugs of tar*-pkg targets
* tag 'kbuild-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: buildtar: do not print successful message if tar returns error
kbuild: buildtar: fix tar error when CONFIG_MODULES is disabled
kbuild: Use KCONFIG_CONFIG in buildtar
Kbuild: enable -Wunused-macros warning for "make W=2"
kbuild: use $(abspath ...) instead of $(shell cd ... && /bin/pwd)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These include a usual ACPICA code update (this time to upstream
revision 20170728), a fix for a boot crash on some systems with
Thunderbolt devices connected at boot time, a rework of the handling
of PCI bridges when setting up device wakeup, new support for Apple
device properties, support for DMA configurations reported via ACPI on
ARM64, APEI-related updates, ACPI EC driver updates and assorted minor
modifications in several places.
Specifics:
- Update the ACPICA code in the kernel to upstream revision 20170728
including:
* Alias operator handling update (Bob Moore).
* Deferred resolution of reference package elements (Bob Moore).
* Support for the _DMA method in walk resources (Bob Moore).
* Tables handling update and support for deferred table
verification (Lv Zheng).
* Update of SMMU models for IORT (Robin Murphy).
* Compiler and disassembler updates (Alex James, Erik Schmauss,
Ganapatrao Kulkarni, James Morse).
* Tools updates (Erik Schmauss, Lv Zheng).
* Assorted minor fixes and cleanups (Bob Moore, Kees Cook, Lv
Zheng, Shao Ming).
- Rework the initialization of non-wakeup GPEs with method handlers
in order to address a boot crash on some systems with Thunderbolt
devices connected at boot time where we miss an early hotplug event
due to a delay in GPE enabling (Rafael Wysocki).
- Rework the handling of PCI bridges when setting up ACPI-based
device wakeup in order to avoid disabling wakeup for bridges
prematurely (Rafael Wysocki).
- Consolidate Apple DMI checks throughout the tree, add support for
Apple device properties to the device properties framework and use
these properties for the handling of I2C and SPI devices on Apple
systems (Lukas Wunner).
- Add support for _DMA to the ACPI-based device properties lookup
code and make it possible to use the information from there to
configure DMA regions on ARM64 systems (Lorenzo Pieralisi).
- Fix several issues in the APEI code, add support for exporting the
BERT error region over sysfs and update APEI MAINTAINERS entry with
reviewers information (Borislav Petkov, Dongjiu Geng, Loc Ho, Punit
Agrawal, Tony Luck, Yazen Ghannam).
- Fix a potential initialization ordering issue in the ACPI EC driver
and clean it up somewhat (Lv Zheng).
- Update the ACPI SPCR driver to extend the existing XGENE 8250
workaround in it to a new platform (m400) and to work around an
Xgene UART clock issue (Graeme Gregory).
- Add a new utility function to the ACPI core to support using ACPI
OEM ID / OEM Table ID / Revision for system identification in
blacklisting or similar and switch over the existing code already
using this information to this new interface (Toshi Kani).
- Fix an xpower PMIC issue related to GPADC reads that always return
0 without extra pin manipulations (Hans de Goede).
- Add statements to print debug messages in a couple of places in the
ACPI core for easier diagnostics (Rafael Wysocki).
- Clean up the ACPI processor driver slightly (Colin Ian King, Hanjun
Guo).
- Clean up the ACPI x86 boot code somewhat (Andy Shevchenko).
- Add a quirk for Dell OptiPlex 9020M to the ACPI backlight driver
(Alex Hung).
- Assorted fixes, cleanups and updates related to ACPI (Amitoj Kaur
Chawla, Bhumika Goyal, Frank Rowand, Jean Delvare, Punit Agrawal,
Ronald Tschalär, Sumeet Pawnikar)"
* tag 'acpi-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (75 commits)
ACPI / APEI: Suppress message if HEST not present
intel_pstate: convert to use acpi_match_platform_list()
ACPI / blacklist: add acpi_match_platform_list()
ACPI, APEI, EINJ: Subtract any matching Register Region from Trigger resources
ACPI: make device_attribute const
ACPI / sysfs: Extend ACPI sysfs to provide access to boot error region
ACPI: APEI: fix the wrong iteration of generic error status block
ACPI / processor: make function acpi_processor_check_duplicates() static
ACPI / EC: Clean up EC GPE mask flag
ACPI: EC: Fix possible issues related to EC initialization order
ACPI / PM: Add debug statements to acpi_pm_notify_handler()
ACPI: Add debug statements to acpi_global_event_handler()
ACPI / scan: Enable GPEs before scanning the namespace
ACPICA: Make it possible to enable runtime GPEs earlier
ACPICA: Dispatch active GPEs at init time
ACPI: SPCR: work around clock issue on xgene UART
ACPI: SPCR: extend XGENE 8250 workaround to m400
ACPI / LPSS: Don't abort ACPI scan on missing mem resource
mailbox: pcc: Drop uninformative output during boot
ACPI/IORT: Add IORT named component memory address limits
...
|
|
Kbuild conventionally uses $(shell cd ... && /bin/pwd) idiom to get
the absolute path of the directory because GNU Make 3.80, the minimal
supported version at that time, did not support $(abspath ...) or
$(realpath ...).
Commit 37d69ee30808 ("docs: bump minimal GNU Make version to 3.81")
dropped the GNU Make 3.80 support, so we are now allowed to use those
make-builtin helpers.
This conversion will provide better portability without relying on
the pwd command or its location /bin/pwd.
I am intentionally using $(realpath ...) instead $(abspath ...) in
some places. The difference between the two is $(realpath ...)
returns an empty string if the given path does not exist. It is
convenient in places where we need to error-out if the makefile fails
to create an output directory.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Thierry Reding <treding@nvidia.com>
|
|
ACPICA commit 343fc31840d40c06001f3b170ee5bcdfd3c7f3e0
ACPI spec allows to configure different 32-bit/64-bit table addresses for
DSDT and FACS. And for FACS, it's meaningful to dump both of them as they
are used to support different suspend protocols.
While:
1. on Linux, only 1 instance is supported for DSDT/FACS; and
2. on EFI, the code in osl_get_table() is buggy with special table instances,
causing endless file dump for such tables (reported by Shao Ming in link
#2).
This patch adds DSDT/FACS instance support for Linux/EFI acpidump. Fixed by
Lv Zheng.
Link: https://github.com/acpica/acpica/commit/343fc318
Link: https://bugs.acpica.org/show_bug.cgi?id=1407 [#1]
Link: https://github.com/acpica/acpica/issues/285 [#2]
Reported-by: Shao Ming <smbest163@163.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit 01b8f5a2350b9cc329cd8402ac8faec36fc501f5
In order to build ACPICA EFI tools with EDK-II on Windows, 64-bit
multiply/shift supports are also required to be implemented. Otherwise,
MSVC complains:
acpidump.lib(utstrtoul64.obj) : error LNK2001: unresolved external symbol __allmul
acpidump.lib(uthex.obj) : error LNK2001: unresolved external symbol __aullshr
Note:
1. This patch also splits _EDK2_EFI from _GNU_EFI as they might have
different math64 supports.
2. Support of gcc math64 is not included in this patch.
3. Support of EDK2 arch independent math64 is done via linking to base_lib.
This patch fixes this issue. Reported by Shao Ming, fixed by Lv Zheng.
For Linux kernel, this patch is a functional no-op.
Link: https://github.com/acpica/acpica/commit/01b8f5a2
Tested-by: "Shao, Ming" <smbest163@163.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Linux-3.7 added CONFIG_BOOTPARAM_HOTPLUG_CPU0,
allowing systems to offline cpu0.
But when cpu0 is offline, cpupower monitor will not display all
processor and Mperf information:
[root@intel-skylake-dh-03 cpupower]# ./cpupower monitor
WARNING: at least one cpu is offline
|Idle_Stats
CPU | POLL | C1-S | C1E- | C3-S | C6-S | C7s- | C8-S
4| 0.00| 0.00| 0.00| 0.00| 0.90| 0.00| 96.13
1| 0.00| 0.00| 5.49| 0.00| 0.01| 0.00| 92.26
5| 0.00| 0.00| 0.00| 0.00| 0.46| 0.00| 99.50
2| 45.42| 0.00| 0.00| 0.00| 22.94| 0.00| 28.84
6| 0.00| 37.54| 0.00| 0.00| 0.00| 0.00| 0.00
3| 0.00| 0.00| 0.00| 0.00| 0.30| 0.00| 91.99
7| 0.00| 0.00| 0.00| 0.00| 4.70| 0.00| 0.70
This patch replaces the hard-coded use of cpu0 in cpupower with the
current cpu, allowing it to run without a cpu0.
After the patch is applied,
[root@intel-skylake-dh-03 cpupower]# ./cpupower monitor
WARNING: at least one cpu is offline
|Nehalem || Mperf || Idle_Stats
CPU | C3 | C6 | PC3 | PC6 || C0 | Cx | Freq || POLL | C1-S | C1E- | C3-S | C6-S | C7s- | C8-S
4| 0.01| 1.27| 0.00| 0.00|| 0.04| 99.96| 3957|| 0.00| 0.00| 0.00| 0.00| 1.43| 0.00| 98.52
1| 0.00| 98.82| 0.00| 0.00|| 0.05| 99.95| 3361|| 0.00| 0.00| 0.01| 0.00| 0.03| 0.00| 99.88
5| 0.00| 98.82| 0.00| 0.00|| 0.09| 99.91| 3917|| 0.00| 0.00| 0.00| 0.00| 99.38| 0.00| 0.50
2| 0.33| 0.00| 0.00| 0.00|| 0.00|100.00| 3890|| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00|100.00
6| 0.33| 0.00| 0.00| 0.00|| 0.01| 99.99| 3903|| 0.00| 0.00| 0.00| 0.00| 0.00| 0.00| 99.99
3| 0.01| 0.71| 0.00| 0.00|| 0.06| 99.94| 3678|| 0.00| 0.00| 0.00| 0.00| 0.80| 0.00| 99.13
7| 0.01| 0.71| 0.00| 0.00|| 0.03| 99.97| 3538|| 0.00| 0.69| 11.70| 0.00| 0.00| 0.00| 87.57
There are some minor cleanups included in this patch.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Thomas Renninger <trenn@suse.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
update help text and man pages for both tools
- added more examples and separated them by category
Makefile upgrades
- uninstall: remove errors from uninstall if tool not found
- install: perform uninstall before install
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
- changed output from single html file to dir with html/dmesg/ftrace
- add sysinfo to logs and timeline
- add -sysinfo command, displays dmidecode values and cpu/mem info
- set trace buffer size to lesser of memtotal/2 or 2GB when using callgraph
- extended timeline to the last init call in user space
separated timeline into two phases, kernel mode & user mode
- add kernel version check for ftrace usage, 4.10 minimum
- change -filter argument to -func
- add strict protections on -func usage with full symbol checks
now only works for statically linked functions
cmd -flistall now ignores all loadable module functions
- add -cgfilter argument for reducing timeline size by removing callgraphs
- crontab usage: preserve existing @reboot lines in user crontab
- fedora support added: uses grub2 loader, handles fedora crontab
- stop using "which" to find binaries, search pre-defined path list
- moved most output processing to analyze_suspend library
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
- changed -rtcwake parameter to be on & 15 sec by default,
to disable rtcwake use: "-rtcwake off"
- changed behavior of -o: renames HTML file on rerun, subdir on new run
- changed execution_misalignment error to missing_function_name
- add sysinfo to logs and timeline via a custom dmidecode call
it supplants dmidecode tool when used as a library call
- add -sysinfo command, displays dmidecode values and cpu/mem info
- set trace buffer size to lesser of memtotal/2 or 2GB when using callgraph
- add support for /sys/power/mem_sleep. if mem_sleep found:
mem-shallow=standby, mem-s2idle=freeze, mem-deep=mem
- remove redundant javascript
- cosmetic changes to HTML layout
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These mostly update the ACPICA code in the kernel to upstream revision
20170531 which covers all of the new material from ACPI 6.2, including
new tables (WSMT, HMAT, PPTT), new subtables and definition changes
for some existing tables (BGRT, HEST, SRAT, TPM2, PCCT), new resource
descriptor macros for pin control, support for new predefined methods
(_LSI, _LSR, _LSW, _HMA), fixes and cleanups.
On top of that, an additional ACPICA change from Kees (which also is
upstream already) switches all of the definitions of function pointer
structures in ACPICA to use designated initializers so as to make the
structure layout randomization GCC plugin work with it.
The rest is a few fixes and cleanups in the EC driver, an xpower PMIC
driver update, a new backlight blacklist entry, and update of the
tables configfs interface and a messages formatting cleanup.
Specifics:
- Update the ACPICA code in the kernel to upstream revision revision
20170531 (which covers all of the new material from ACPI 6.2)
including:
* Support for the PinFunction(), PinConfig(), PinGroup(),
PinGroupFunction(), and PinGroupConfig() resource descriptors
(Mika Westerberg).
* Support for new subtables in HEST and SRAT, new notify value for
HEST, header support for TPM2 table changes, and BGRT Status
field update (Bob Moore).
* Support for new PCCT subtables (David Box).
* Support for _LSI, _LSR, _LSW, and _HMA as predefined methods
(Erik Schmauss).
* Support for the new WSMT, HMAT, and PPTT tables (Lv Zheng).
* New UUID values for Processor Properties (Bob Moore).
* New notify values for memory attributes and graceful shutdown
(Bob Moore).
* Fix related to the PCAT_COMPAT MADT flag (Janosch Hildebrand).
* Resource to AML conversion fix for resources containing GPIOs
(Mika Westerberg).
* Disassembler-related updates (Bob Moore, David Box, Erik
Schmauss).
* Assorted fixes and cleanups (Bob Moore, Erik Schmauss, Lv Zheng,
Cao Jin).
- Modify ACPICA to always use designated initializers for function
pointer structures to make the structure layout randomization GCC
plugin work with it (Kees Cook).
- Update the tables configfs interface to unload SSDTs on configfs
entry removal (Jan Kiszka).
- Add support for the GPI1 regulator to the xpower PMIC Operation
Region handler (Hans de Goede).
- Fix ACPI EC issues related to conflicting EC definitions in the
ECDT and in the ACPI namespace (Lv Zheng, Carlo Caione, Chris
Chiu).
- Fix an interrupt storm issue in the EC driver and make its debug
output work with dynamic debug as expected (Lv Zheng).
- Add ACPI backlight quirk for Dell Precision 7510 (Shih-Yuan Lee).
- Fix whitespace in pr_fmt() to align log entries properly in some
places in the ACPI subsystem (Vincent Legoll)"
* tag 'acpi-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (63 commits)
ACPI / EC: Add quirk for GL720VMK
ACPI / EC: Fix media keys not working problem on some Asus laptops
ACPI / EC: Add support to skip boot stage DSDT probe
ACPI / EC: Enhance boot EC sanity check
ACPI / video: Add quirks for the Dell Precision 7510
ACPI: EC: Fix EC command visibility for dynamic debug
ACPI: EC: Fix an EC event IRQ storming issue
ACPICA: Use designated initializers
ACPICA: Update version to 20170531
ACPICA: Update a couple of debug output messages
ACPICA: acpiexec: enhance local signal handler
ACPICA: Simplify output for the ACPI Debug Object
ACPICA: Unix application OSL: Correctly handle control-c (EINTR)
ACPICA: Improvements for debug output only
ACPICA: Disassembler: allow conflicting external declarations to be emitted.
ACPICA: Disassembler: add external op to namespace on first pass
ACPICA: Disassembler: prevent external op's from opening a new scope
ACPICA: Changed Gbl_disasm_flag to acpi_gbl_disasm_flag
ACPICA: Changing External to a named object
ACPICA: Update two error messages to emit control method name
...
|
|
ACPICA commit dfbb87c3a96cfd007375f34a96e6f4a8ee477f97
Handle EINTR from a sem_wait operation. Ignore a control-c.
Link: https://github.com/acpica/acpica/commit/dfbb87c3
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add support for new AMD family 0x17
- Add bit field changes to the msr_pstate structure
- Add the new formula for the calculation of cof
- Changed method to access to CpbDis
Signed-off-by: Sherry Hurwitz <sherry.hurwitz@amd.com>
Acked-by: Thomas Renninger <trenn@suse.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Save return value from amd_pci_get_num_boost_states
and remove redundant setting of *support
Signed-off-by: Sherry Hurwitz <sherry.hurwitz@amd.com>
Reviewed-by: Thomas Renninger <trenn@suse.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
|
|
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
otherwise, turbostat bails on on AMD Opteron boxes:
turbostat: cpu26: msr offset 0x1a0 read failed: Input/output error
Reported-by: Kamil Kolakowski <kkolakow@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Turbostat has the capability to set its own affinity to
each CPU so that its MSR accesses are on the local CPU.
However, using the in-kernel cross-call in the msr driver
tends to be less invasive, so do that -- by-default.
'-m' remains to get the old behaviour.
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
The --debug option now pre-pends each row with
the number of micro-seconds [usec] to collect
the finishing snapshot for that row.
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Skylake has some new counters, and they were erroneously
exempt from --show and --hide
eg.
turbostat --quiet --show CPU
CPU Totl%C0 Any%C0 GFX%C0 CPUGFX%
- 116.73 90.56 85.69 79.00
0 117.78 91.38 86.47 79.71
2
1
3
is now
CPU
-
0
2
1
3
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
* acpi-button:
Revert "ACPI / button: Remove lid_init_state=method mode"
* acpi-tools:
tools/power/acpi: Add .gitignore file
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull power management utilities updates from Len Brown.
* 'utilities' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
intel_pstate: use updated msr-index.h HWP.EPP values
tools/power x86_energy_perf_policy: support HWP.EPP
x86: msr-index.h: fix shifts to ULL results in HWP macros.
x86: msr-index.h: define HWP.EPP values
x86: msr-index.h: define EPB mid-points
|
|
Add a .gitignore file so that git commands do not pick up the resulting
binaries and directories.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Acked-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
x86_energy_perf_policy(8) was created as an example
of how the user, or upper-level OS, can manage
MSR_IA32_ENERGY_PERF_BIAS (EPB).
Hardware consults EPB when it makes internal decisions
balancing energy-saving vs performance.
For example, should HW quickly or slowly
transition into and out of power-saving idles states?
Should HW quickly or slowly ramp frequency up or down
in response to demand in the turbo-frequency range?
Depending on the processor, EPB may have package, core,
or CPU thread scope. As such, the only general policy
is to write the same value to EPB on every CPU in the system.
Recent platforms add support for Hardware Performance States (HWP).
HWP effectively extends hardware frequency control from
the opportunistic turbo-frequency range to control the entire
range of available processor frequencies.
Just as turbo-mode used EPB, HWP can use EPB to help decicde
how quickly to ramp frequency and voltage up and down
in response to changing demand. Indeed, BDX and BDX-DE,
the first processors to support HWP, use EPB for this purpose.
Starting in SKL, HWP no longer looks to EPB for influence.
Instead, it looks in a new MSR specifically for this purpose:
IA32_HWP_REQUEST.Energy_Performance_Preference (HWP.EPP).
HWP.EPP is like EPB, except that it is specific to HWP-mode
frequency selection. Also, HWP.EPP is defined to have
per CPU-thread scope.
Starting in SKX, IA32_HWP_REQUEST is augmented by
IA32_HWP_REQUEST_PKG -- which has the same function, but is
defined to have package-wide scope. A new bit in IA32_HWP_REQUEST
determines if it over-rides the IA32_HWP_REQUEST_PKG or not.
Note that HWP-mode can be enabled in several ways.
The "in-band" method is for HWP to be exposed in CPUID,
and for the Linux intel_pstate driver to recognized that,
and thus enable HWP. In this case, starting in Linux 4.10, intel_pstate
exports cpufreq sysfs attribute "energy_performance_preference"
which can be used to manage HWP.EPP. This interface can be
used to set HWP.EPP to these values:
0 performance
128 balance_performance (default)
192 balance_power
255 power
Here, x86_energy_performance_policy is updated to use
idential strings and values as intel_pstate.
But HWP-mode may also be enabled by firmware before the OS boots,
and the OS may not be aware of HWP. In this case, intel_pstate
is not available to provide sysfs attributes, and x86_energy_perf_policy
or a similar utility is invaluable for managing HWP.EPP, for
this utility works the same, no matter if cpufreq is enabled or not.
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
BootGraph and SleepGraph man pages
- includes full descriptions of tool arguments and commands
- includes examples of common use cases
Makefile
- no build required, used only for install
- installs man pages and tools as libraries with links
- includes an uninstall
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
First release into the kernel tools source
- pulls in analyze_suspend.py as as library, same html formatting
- supplants scripts/bootgraph.pl, outputs HTML instead of SVG
- enables automatic reboot and collection for easy timeline capture
- enables ftrace callgraph collection from early boot
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Moved from scripts into tools, and updated from 4.5 to 4.6
- Changed the tool title to SleepGraph
- Reformatted the code so analyze_suspend can be used as a library
- Reorganized all html/js/css handling code to be used by other tools
- upgraded the -summary feature to work faster with better readability
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The intel_pstate_tracer.py script only needs to be run as root
when it is also used to actually acquire the trace data that
it will post process. Otherwise it is generally preferable
that it be run as a regular user.
If run the first time as root the results directory will be
incorrect for any subsequent run as a regular user. For any run
as root the specific testname subdirectory will not allow any
subsequent file saves by a regular user. Typically, and for example,
the regular user might be attempting to save a .csv file converted to
a spreadsheet with added calculations or graphs.
Set the directories and files owner and groups IDs to be the regular
user, if required.
Signed-off-by: Doug Smythies <dsmythies@telus.net>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The switch that conditionally sets CPUPOWER_CAP_HAS_TURBO_RATIO and
CPUPOWER_CAP_IS_SNB flags is missing a break, so all cores get both
flags set and an assumed base clock of 100 MHz for turbo values.
Reported-by: GSR <gsr.bugs@infernal-iceberg.com>
Tested-by: GSR <gsr.bugs@infernal-iceberg.com>
References: https://bugs.debian.org/859978
Fixes: 8fb2e440b223 (cpupower: Show Intel turbo ratio support via ...)
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat utility fixes for v4.11 from Len Brown.
* 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: update version number
tools/power turbostat: fix impossibly large CPU%c1 value
tools/power turbostat: turbostat.8 add missing column definitions
tools/power turbostat: update HWP dump to decimal from hex
tools/power turbostat: enable package THERM_INTERRUPT dump
tools/power turbostat: show missing Core and GFX power on SKL and KBL
tools/power turbostat: bugfix: GFXMHz column not changing
|
|
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Most CPUs do not have a hardware c1 counter,
and so turbostat derives c1 residency:
c1 = TSC - MPERF - other_core_cstate_counters
As it is not possible to atomically read these coutners,
measurement jitter can case this calcuation to "go negative"
when very close to 0. Turbostat detect that case and
simply prints c1 = 0.00%
But that check neglected to account for systems where the TSC
crystal clock domain and the MPERF BCLK domain are differ by
a small amount. That allowed very small negative c1 numbers
to escape this check and be printed as huge positve numbers.
This code begs for a bit of cleanup, but this patch
is the minimal change to fix the issue.
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Add GFX%rc6 and GFXMHz to the column descriptions section
of the turbostat man page.
Signed-off-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Syntax only.
The HWP CAPABILTIES and REQUEST ratios are more easily
viewed in decimal -- just multiply by 100 and you get MHz...
new:
cpu0: MSR_HWP_CAPABILITIES: 0x010c1b23 (high 35 guar 27 eff 12 low 1)
cpu0: MSR_HWP_REQUEST: 0x80002301 (min 1 max 35 des 0 epp 0x80 window 0x0 pkg 0x0)
old:
cpu0: MSR_HWP_CAPABILITIES: 0x010c1b23 (high 0x23 guar 0x1b eff 0xc low 0x1)
cpu0: MSR_HWP_REQUEST: 0x80002301 (min 0x1 max 0x23 des 0x0 epp 0x80 window 0x0 pkg 0x0)
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
cpu0: MSR_IA32_TEMPERATURE_TARGET: 0x00641400 (100 C)
cpu0: MSR_IA32_PACKAGE_THERM_STATUS: 0x884b0800 (25 C)
cpu0: MSR_IA32_PACKAGE_THERM_INTERRUPT: 0x00000003 (100 C, 100 C)
Enable the same per-core output, but hide it behind --debug
because it is too verbose on big systems.
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
While the current SDM is silent on the matter, the Core and GFX
RAPL power meters on SKL and KBL appear to work -- so show them.
Reported-by: Yaroslav Isakov <yaroslav.isakov@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
turbostat displays a GFXMHz column, which comes from reading
/sys/class/graphics/fb0/device/drm/card0/gt_cur_freq_mhz
But GFXMHz was not changing, even when a manual
cat /sys/class/graphics/fb0/device/drm/card0/gt_cur_freq_mhz
showed a new value.
It turns out that a rewind() on the open file is not sufficient,
fflush() (or a close/open) is needed to read fresh values.
Reported-by: Yaroslav Isakov <yaroslav.isakov@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull turbostat utility updates from Rafael Wysocki:
"Power management turbostat utility updates.
These update turbostat significantly and in particular:
- default output is now verbose, --debug is no longer required to get
all counters. As a result, some options have been added to specify
exactly what output is wanted.
- added --quiet to skip system configuration output
- added --list, --show and --hide parameters
- added --cpu parameter
- enhanced Baytrail SoC support
- added Gemini Lake SoC support
- added sysfs C-state columns
Also the symbol definitions in arch/x86/include/asm/intel-family.h and
arch/x86/include/asm/msr-index.h are updated and the intel_idle and
intel_pstate drivers are modified to use the updated symbols.
Credits to Len Brown for all of these changes"
* tag 'pm-turbostat-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (44 commits)
tools/power turbostat: version 17.02.24
tools/power turbostat: bugfix: --add u32 was printed as u64
tools/power turbostat: show error on exec
tools/power turbostat: dump p-state software config
tools/power turbostat: show package number, even without --debug
tools/power turbostat: support "--hide C1" etc.
tools/power turbostat: move --Package and --processor into the --cpu option
tools/power turbostat: turbostat.8 update
tools/power turbostat: update --list feature
tools/power turbostat: use wide columns to display large numbers
tools/power turbostat: Add --list option to show available header names
tools/power turbostat: fix zero IRQ count shown in one-shot command mode
tools/power turbostat: add --cpu parameter
tools/power turbostat: print sysfs C-state stats
tools/power turbostat: extend --add option to accept /sys path
tools/power turbostat: skip unused counters on BDX
tools/power turbostat: fix decoding for GLM, DNV, SKX turbo-ratio limits
tools/power turbostat: skip unused counters on SKX
tools/power turbostat: Denverton: use HW CC1 counter, skip C3, C7
tools/power turbostat: initial Gemini Lake SOC support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull changes related to turbostat for v4.11 from Len Brown.
* 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (44 commits)
tools/power turbostat: version 17.02.24
tools/power turbostat: bugfix: --add u32 was printed as u64
tools/power turbostat: show error on exec
tools/power turbostat: dump p-state software config
tools/power turbostat: show package number, even without --debug
tools/power turbostat: support "--hide C1" etc.
tools/power turbostat: move --Package and --processor into the --cpu option
tools/power turbostat: turbostat.8 update
tools/power turbostat: update --list feature
tools/power turbostat: use wide columns to display large numbers
tools/power turbostat: Add --list option to show available header names
tools/power turbostat: fix zero IRQ count shown in one-shot command mode
tools/power turbostat: add --cpu parameter
tools/power turbostat: print sysfs C-state stats
tools/power turbostat: extend --add option to accept /sys path
tools/power turbostat: skip unused counters on BDX
tools/power turbostat: fix decoding for GLM, DNV, SKX turbo-ratio limits
tools/power turbostat: skip unused counters on SKX
tools/power turbostat: Denverton: use HW CC1 counter, skip C3, C7
tools/power turbostat: initial Gemini Lake SOC support
...
|
|
The turbostat before this last set of changes is obsolete.
This new version can do a lot more, but it also has
some different defaults, that might catch some off-guard.
So it seems a good time to give a new version number.
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
When the "u32" keyword is used with --add, it means that
the output should be truncated to 32-bits. This was not
happening and all 64-bits were printed.
Also, when no column name was used for an added MSR,
The default column name was in deximal, eg. MSR16.
Users report that they tend to use hex MSR numbers,
so print them in hex. To always fit into the columns,
use the syntax M0x10. Note that the user can always
supply any column header that they want.
eg --add msr0x10,MY_TSC
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
When turbostat is run in one-shot command mode,
the parent takes the 'before' counter snapshot,
fork/exec/wait for the child to exit,
takes the 'after' counter snapshot,
and prints the results.
however, if the child fails to exec the command,
it immediately returns, without indicating that
anythign was wrong.
Add an error message showing that exec failed:
sudo turbostat sleeeep 4
...
turbostat: exec sleeeep: No such file or directory
...
Note that the parent will still print out the statistics,
because it can't tell the difference between the failed
exec and a command that is purposefully returning
the same status. Unfortunately, this may obscure the
error message. However, if the --out parameter is used,
the error message is evident on stderr.
Reported-by: Wendy Wang <wendy.wang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
cpu1: cpufreq driver: acpi-cpufreq
cpu1: cpufreq governor: ondemand
cpufreq boost: 1
or
cpu0: cpufreq driver: intel_pstate
cpu0: cpufreq governor: powersave
cpufreq intel_pstate no_turbo: 0
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
On multi-package systems, the "Package" column was being displayed
only if --debug was used. Show it always.
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Originally, the only way to hide the sysfs C-state statistics columns
was with "--hide sysfs". This was because we process "--hide" before
we probe for those columns.
hack --hide to remember deferred hide requests, and apply
them when sysfs is probed.
"--hide sysfs" is still available as short-hand to refer to
the entire group of counters.
The down-side of this change is that we no longer error check for
bogus --hide column names. But the user will quickly figure that
out if a column they mean to hide is still there...
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
--Package is now "--cpu package",
which will display just the 1st CPU in each package
--processor is not "--cpu core"
which will display just the 1st CPU in each core
Signed-off-by: Len Brown <len.brown@intel.com>
|
