| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
'asoc/topic/da7213', 'asoc/topic/da7218' and 'asoc/topic/dai-drv' into asoc-next
|
|
'asoc/topic/cs42l52', 'asoc/topic/cs42l56' and 'asoc/topic/cs42l73' into asoc-next
|
|
and 'asoc/topic/cq93vc' into asoc-next
|
|
'asoc/topic/atmel', 'asoc/topic/au1x' and 'asoc/topic/bcm2835' into asoc-next
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Reported-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If bcm2835 is configured as bitclock master calling hw_params()
after prepare() fails with EBUSY. This also makes it impossible to
use bcm2835 in full duplex mode.
The error is caused by the split clock setup: clk_set_rate
is called in hw_params, clk_prepare_enable in prepare. As hw_params
doesn't check if the clock was already enabled clk_set_rate
fails with EBUSY.
Fix this by moving clock startup from prepare to hw_params and
let hw_params properly deal with an already set up or enabled
clock.
Signed-off-by: Matthias Reichl <hias@horus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
SND_SST_ATOM_HIFI2_PLATFORM_PCI select SND_SOC_INTEL_COMMON which do not
exists anymore.
So remove this select.
Fixes: c6059879be29 ("ASoC: Intel: Fix Kconfig with top-level selector")
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The second assignment to res is identical to the previous assignment
so it is redundant and can be removed.
Cleans up clang warning:
sound/soc/intel/skylake/skl-topology.c:191:25: warning: Value stored to
'res' during its initialization is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In current ALSA SoC, Codec only has .read/.write callback.
Codec will be merged into Component in next generation ALSA SoC,
thus current Codec specific feature need to be merged into it.
This is glue patch for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
commit 39b5a0f80c07f ("ASoC: cx20442: don't use reg_cache")
removed .read/.write from driver, but it might breaks non-regmap
driver, because ALSA SoC framework might call it.
To fix this regression, this patch back .read/.write.
and also this patch uses cx20442 internal reg_cache
which is needed for .read/.write.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The loop timeout doesn't work because it's a post op and ends with "tmo"
set to -1. I changed it from a post-op to a pre-op and I changed the
initial the starting value from 5 to 6 so we still iterate 5 times. I
left the other as it was because it's a large number.
Fixes: b3c70c9ea62a ("ASoC: Alchemy AC97C/I2SC audio support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Instead of home grown snd_soc_acpi_find_name_from_hid() use
acpi_dev_get_first_match_name().
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel
|
|
The trailing semicolon is an empty statement that does no operation.
Removing it since it doesn't do anything.
Signed-off-by: Luis de Bethencourt <luisbg@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove hard-codec [16] array size, replace with clearer description and
dependency on ACPI_ID_LEN
No functionality change
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Same problem as with previous machine drivers, the codec dai
uses a hard-coded name of "i2c-ESSX8316:00" but ACPI provides
"i2c-ESSX8316:01" in some systems.
Fix by overriding the hard-coded value with the codec name derived
from the HID information
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=189261
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm into asoc-intel
|
|
This codec was used in MFLD systems in the PMIC chip, we no longer have
users for this, so remove it
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
mfld_machine was not getting compiled due to missed Makefile changes.
Since no one complained it is safe to assume that it is not being used,
so remove it
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The DMIC DAI driver specifies a number of 1 to 8 channels for each DAI.
The actual number of mics can currently not be configured in the device
tree or audio glue, but is derived from the min/max channels of the CPU
and codec DAI. A typical CPU DAI has two or more channels, in consequence
a single mic is treated as a stereo/multi channel device, even though
only one channel carries audio data.
This change adds the option to specify the number of used DMIC channels
in the device tree. When specified this value overwrites the default
channels_max value of 8 in the snd_soc_dai_driver struct of the codec.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Drop "Intel ASoC SST driver for " platforms and "SOC Machine Audio driver
for Intel" for machines..
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Help in finding matching "if" endings by commenting the "endif".
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
No reason why SND_SOC_INTEL_SST should be set here.
Also make sure same dependencies are used everywhere (only last one has SPI
in addition). Replace X86_INTEL_LPSS by MFD_INTEL_LPSS since the former
makes no sense for Skylake+ devices
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Make sure all the configs are aligned
Also add the missing dependencies on SOC_ACPI stuff used to fix
DAI names based on HID and fix a couple of indentation issues
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Make sure that the same I2C/I2C_DESIGNWARE_PLATFORM are selected.
The latter might actually need to be moved to the SOC side of things,
it really has no place in a machine driver dependency
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch fixes a number of issues:
1. IOSF_MBI is only needed for byt-cr detection, which is only supported
on Baytrail/Cherrytrail, move to HiFi2 config
2. SND_SOC_INTEL_SST should not select SND_SOC_INTEL_SST_ACPI, the latter
config is only valid for Haswell/Baytrail legacy but not needed by Skylake
3. SND_SST_IPC_ACPI, used only by the atom/sst driver, should not select
SND_SOC_INTEL_SST, none of the code under common/sst*.c is used
This nesting of configs really makes no sense, it's easier to maintain
if for each platform one can control what is strictly required.
Compiled-tested with each of Haswell, Baytrail legacy, HiFi2, SKL cases
selected independently. 0-day and explicit randconfig tests did not report
additional issues and no functionality loss was observed in Intel tests on
HIFI2 and SKYLAKE platforms
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Document in comments what the options are supposed to mean, before
clean-up in next patch.
No functionality change here.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
PCI/ACPI selections should not happen in Kconfig for machine drivers,
move to SOC selections.
Add distinction between PCI and ACPI HiFi2 platforms and help text.
There should be no functionality change.
The PCI-based platforms may be removed at some point since Medfield
is not really supported by anyone, and with Edison now defunct support for
Merrifield/Edison is to be determined.
The dependency on SND_DMA_SGBUF for Haswell is not clear at this
point and may have to be further updated.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Follow network example suggested by Linus, move Intel definitions
in if/endif block and clarify in help text which options distro
configurations should enable - everything except legacy Baytrail stuff and
NOCODEC (test only)
To avoid user confusion, machine drivers are handled with a submenu made
dependent on this top-level selector.
There should be no functionality change - except that sound capabilities
are restored when using older configs without any user selection.
Note that the SND_SOC_ACPI_INTEL_MATCH config is currently filtered
out by the top-level selector. This will change in the near future to
allow for this option to be selected by both SST and SOF drivers
(simplification with submenu for machine drivers by Vinod Koul)
Fixes: f6a118a800e3 ("ASoC: Intel: clarify Kconfig dependencies")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When restoring registers during runtime resume, we must not write to
I2S_TXDR which is the transmit FIFO as this queues up a sample to be
output and pushes all of the output channels down by one.
This can be demonstrated with the speaker-test utility:
for i in a b c; do speaker-test -c 2 -s 1; done
which should play a test through the left speaker three times but if the
I2S hardware starts runtime suspended the first sample will be played
through the right speaker.
Fix this by marking I2S_TXDR as volatile (which also requires marking it
as readble, even though it technically isn't). This seems to be the
most robust fix, the alternative of giving I2S_TXDR a default value is
more fragile since it does not prevent regcache writing to the register
in all circumstances.
While here, also fix the configuration of I2S_RXDR and I2S_FIFOLR; these
are not writable so they do not suffer from the same problem as I2S_TXDR
but reading from I2S_RXDR does suffer from a similar problem.
Fixes: f0447f6cbb20 ("ASoC: rockchip: i2s: restore register during runtime_suspend/resume cycle", 2016-09-07)
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
|
|
Add the DAPM widgets and routes.
Tested with MinnowMax Turbot + rt5651 eval board with Speaker
(LineOut) -> LineIn loopback
Thanks to Bard Liao @ Realtek for providing the 0dB settings
"IN Capture Volume" = 23
"ADC Capture Volume" = 47
"OUT Playback Volume" = 31
"DAC1 Playback Volume" = 175
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Define DMI quirk for rt5651 eval board connected to MinnowBoard
Turbot. The only difference with a MinnowBoard MAX is that the MCLK
pin is enabled on the LSE connector
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Keqiao.Zhang <Keqiao.zhang@intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
On Minnowboard Max with Realtek rt5651 eval board, the IN3P is
connected to Headset Mic.
Here add and select it for Minnowboard Max.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The current code doesn't enable the MCLK which reduces audio quality
(PLL driven from BLCK), fix the quirk
Tested-by: Carlo Caione <carlo@caione.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch fixes 3 small issues:
- missing 2nd '*' at the beginning of a doxygen comment
- extra space after a '\n' in a dev_dbg message
- extra tab before a 'return" statement
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In some error handling paths, an error code is assiegned to 'ret'.
However, the function always return 0.
Fix it and return the error code if such an error paths is taken.
Fixes: 3d9ff34622ba ("ASoC: Intel: sst: add stream operations")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Replace snd_soc_acpi_check_hid() with the generic acpi_dev_present()
and remove the now unused snd_soc_acpi_check_hid function. This should
have no functional change.
Signed-off-by: Jeremy Cline <jeremy@jcline.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel
|
|
PCM OSS read/write loops keep taking the mutex lock for the whole
read/write, and this might take very long when the exceptionally high
amount of data is given. Also, since it invokes with mutex_lock(),
the concurrent read/write becomes unbreakable.
This patch tries to address these issues by replacing mutex_lock()
with mutex_lock_interruptible(), and also splits / re-takes the lock
at each read/write period chunk, so that it can switch the context
more finely if requested.
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The loops for read and write in PCM OSS emulation have no proper check
of pending signals, and they keep processing even after user tries to
break. This results in a very long delay, often seen as RCU stall
when a huge unprocessed bytes remain queued. The bug could be easily
triggered by syzkaller.
As a simple workaround, this patch adds the proper check of pending
signals and aborts the loop appropriately.
Reported-by: syzbot+993cb4cfcbbff3947c21@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
