summaryrefslogtreecommitdiff
path: root/sound/soc/tegra/tegra20_i2s.c
AgeCommit message (Collapse)AuthorFilesLines
2017-03-07ASoC: tegra: Remove unnecessary 'out of memory' messageCodrut Grosu1-1/+0
This was reported by checkpatch.pl Signed-off-by: Codrut GROSU <codrut.cristian.grosu@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-26ASoC: tegra: Use devm_ioremap_resource instead of open codeAxel Lin1-19/+4
Use devm_ioremap_resource() to simplify the code. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-20ASoC: tegra: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-03-20ASoC: tegra: Use flat regcacheDylan Reid1-1/+1
When using an rbtree cache, there can be allocations the first time a register is accessed. This can cause an attempt to schedule while atomic in the case that the regmap is using a spinlock. This could be fixed by either initializing all the registers or using a flat cache. The register maps for tegra30_ahub and tegra30_i2s are dense and don't save much from using a tree so convert them to flat. Tegra30 changes tested on Norrin, Tegra20 changes compile. Signed-off-by: Dylan Reid <dgreid@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-24Merge tag 'cleanup-for-linus' of ↵Linus Torvalds1-19/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "This is the branch where we usually queue up cleanup efforts, moving drivers out of the architecture directory, header file restructuring, etc. Sometimes they tangle with new development so it's hard to keep it strictly to cleanups. Some of the things included in this branch are: * Atmel SAMA5 conversion to common clock * Reset framework conversion for tegra platforms - Some of this depends on tegra clock driver reworks that are shared with Mike Turquette's clk tree. * Tegra DMA refactoring, which are shared branches with the DMA tree. * Removal of some header files on exynos to prepare for multiplatform" * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (169 commits) ARM: mvebu: move Armada 370/XP specific definitions to armada-370-xp.h ARM: mvebu: remove prototypes of non-existing functions from common.h ARM: mvebu: move ARMADA_XP_MAX_CPUS to armada-370-xp.h serial: sh-sci: Rework baud rate calculation serial: sh-sci: Compute overrun_bit without using baud rate algo serial: sh-sci: Remove unused GPIO request code serial: sh-sci: Move overrun_bit and error_mask fields out of pdata serial: sh-sci: Support resources passed through platform resources serial: sh-sci: Don't check IRQ in verify port operation serial: sh-sci: Set the UPF_FIXED_PORT flag serial: sh-sci: Remove duplicate interrupt check in verify port op serial: sh-sci: Simplify baud rate calculation algorithms serial: sh-sci: Remove baud rate calculation algorithm 5 serial: sh-sci: Sort headers alphabetically ARM: EXYNOS: Kill exynos_pm_late_initcall() ARM: EXYNOS: Consolidate selection of PM_GENERIC_DOMAINS for Exynos4 ARM: at91: switch Calao QIL-A9260 board to DT clk: at91: fix pmc_clk_ids data type attriubte PM / devfreq: use inclusion <mach/map.h> instead of <plat/map-s5p.h> ARM: EXYNOS: remove <mach/regs-clock.h> for exynos ...
2013-12-12ASoC: tegra: convert to standard DMA DT bindingsStephen Warren1-19/+1
By passing no flags when calling snd_dmaengine_pcm_register() from tegra_pcm.c, we end up using dma_request_slave_channel() rather than dmaengine_pcm_compat_request_channel(), and hence rely on the standard DMA DT bindings and stashing the DMA slave ID away during channel allocation. This means there's no need to use a custom DT property to store the slave ID. So, remove all the code that parsed it. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Mark Brown <broonie@linaro.org>
2013-12-09ASoC: tegra: fix uninitialized variables in set_fmtStephen Warren1-3/+3
In tegra*_i2s_set_fmt(), in the (fmt == SND_SOC_DAIFMT_CBM_CFM) case, "val" is never assigned to, but left uninitialized. The other case does initialized it. Fix this by initializing val at the start of the function, and only ever ORing into it. Update the handling of "mask" so it works the same way for consistency. Update tegra20_spdif.c to use the same code-style for consistency, even though it doesn't happen to suffer from the same problem at present. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Mark Brown <broonie@linaro.org> Fixes: 0f163546a772 ("ASoC: tegra: use regmap more directly") Cc: <stable@vger.kernel.org>
2013-10-14sound: Remove unnecessary semicolonsJoe Perches1-3/+3
These aren't necessary after switch and if blocks. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-12Merge remote-tracking branch 'asoc/topic/dma' into asoc-nextMark Brown1-6/+7
2013-04-03ASoC: tegra: Use common DAI DMA data structLars-Peter Clausen1-6/+7
Use the common DAI DMA data struct for tegra, this allows us to use the common helper function to configure the DMA slave config based on the DAI DMA data. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-27ASoC: switch over to use snd_soc_register_component() on tegra20 i2sKuninori Morimoto1-5/+10
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-09ASoC: tegra: remove __dev* attributesBill Pemberton1-3/+3
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-20ASoC: remove use of __devinitconstBill Pemberton1-2/+2
CONFIG_HOTPLUG is going away as an option so __devinitconst is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-25Merge tag 'sound-3.6' of ↵Linus Torvalds1-48/+46
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound update from Takashi Iwai: "This is a fairly quiet release in all sound area. Only a little bit of changes in the core side while most of changes are seen in the drivers. HD-audio: - A few new codec additions for Nvidia, Realtek and VIA - Intel Haswell audio support - Support for "phantom" jacks for consistent jack reporting - Major clean-ups in HDMI/DP driver codes - A workaround for inverted digital-mic pins with Realtek codecs - Removal of beep_mode=2 option ASoC: - Added the ability to add and remove DAPM paths dynamically, mostly for reparenting on clock changes - New machine drivers for Marvell Brownstone, ST-Ericsson Ux500 reference platform and ttc-dkp - New CPU drivers for Blackfin BF6xx SPORTs in I2S mode, Marvell MMP, Synopsis Designware I2S controllers, and SPEAr DMA and S/PDIF - New CODEC drivers for Dialog DA732x, ST STA529, ST-Ericsson AB8500, TI Isabelle and Wolfson Microelectronics WM5102 and WM5110 - DAPM fixes for the recent locking changes - Fix for _PRE and _POST widgets (which have been broken for a few releases now) - A couple of minor driver updates Misc - Conversion to new dev_pm_ops in platform and PCI drivers - LTC support and some fixes in PCXHR driver - A few fixes and PM support for ISA OPti9xx and WSS cards - Some TLV code cleanup - Move driver-specific headers from include/sound to local dirs" * tag 'sound-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (212 commits) ASoC: dapm: Fix _PRE and _POST events for DAPM performance improvements ALSA: hda - add dock support for Thinkpad X230 Tablet ALSA: hda - Turn on PIN_OUT from hdmi playback prepare. ASoC imx-audmux: add MX31_AUDMUX_PORT7_SSI_PINS_7 define ASoC: littlemill: Add userspace control of the WM1250 I/O ASoC: wm8994: Update micdet for irqdomain conversion ALSA: hda - make sure alc268 does not OOPS on codec parse ALSA: hda - Add support for Realtek ALC282 ALSA: hda - Fix index number conflicts of phantom jacks ALSA: opti9xx: Fix section mismatch by PM support ALSA: snd-opti9xx: Implement suspend/resume ALSA: hda - Add new GPU codec ID to snd-hda ALSA: hda - Fix driver type of Haswell controller to AZX_DRIVER_SCH ALSA: hda - add Haswell HDMI codec id ALSA: hda - Add DeviceID for Haswell HDA ALSA: wss_lib: Fix resume on Yamaha OPL3-SAx ALSA: wss_lib: fix suspend/resume ALSA: es1938: replace TLV_DB_RANGE_HEAD with DECLARE_TLV_DB_RANGE ALSA: tlv: add DECLARE_TLV_DB_RANGE() ALSA: tlv: add DECLARE_TLV_CONTAINER() ...
2012-06-12ASoC: tegra: add clk_prepare/clk_unpreparePrashant Gaikwad1-2/+2
Use clk_prepare/clk_unprepare as required by the generic clk framework. Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-08ASoC: tegra: use regmap more directlyStephen Warren1-47/+43
Stop open-coding the caching of the ctrl registers; instead, use regmap_update_bits() to update parts of the register from different places. The removal of the open-coded cache will allow controls to be created which touch registers, which will be necessary if any of these modules are converted to CODECs. Get rid of tegra*_read/write; just call regmap_read/write directly. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-08ASoC: tegra: use DAI's not card's dev for dev_errStephen Warren1-1/+1
This is the actual device of the I2S or SPDIF controller reporting the problem. If a future change converts these controllers to be CODECs, then there may be no pcm associated with the substream, so this change avoids a crash. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-08ASoC: tegra: add .stream_name to CPU DAIsStephen Warren1-0/+2
This is certainly required if the I2S and SPDIF controllers are converted to be CODECs, and is probably good practice irrespective. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-13ASoC: convert Tegra20 I2S driver to regmapStephen Warren1-74/+71
Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-09ASoC: tegra: add runtime PM supportStephen Warren1-7/+47
To the Tegra I2S and SPDIF drivers Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-06ASoC: tegra: sort includes, remove mach/iomap.hStephen Warren1-4/+3
Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-06ASoC: tegra: complete Tegra->Tegra20 renamingStephen Warren1-102/+102
Rename Tegra20-specific Kconfig variables, module filenames, all internal symbol names, clocks, and platform devices, to reflect the fact the DAS and I2S drivers are for a specific HW version. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-06ASoC: tegra: rename Tegra20-specific driver filesStephen Warren1-0/+458
Rename these files so they include a specific hardware version in their filenames. The contents is only touched minimally so that git's rename tracking operates correctly; renaming all symbols in the files results in a diff so large that the rename detection fails. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-22 13:38:00 +0300