summaryrefslogtreecommitdiff
path: root/sound/soc/fsl/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2013-08-07ASoC: imx-mc13783: Make SND_SOC_IMX_MC13783 visible againFabio Estevam1-1/+1
Commit 02502da45 (ASoC: imx-mc13783: Depend on ARCH_ARM) introduced 'ARCH_ARM' as a dependency for SND_SOC_IMX_MC13783, but this is a non-existent symbol. This makes the selection of SND_SOC_IMX_MC13783 to be impossible. Use the correct 'ARM' symbol instead. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-31ASoC: fsl: Fix module buildFabio Estevam1-2/+2
Building imx_v6_v7_defconfig with all audio drivers as modules results in the folowing build error: ERROR: "imx_pcm_fiq_init" [sound/soc/fsl/snd-soc-imx-ssi.ko] undefined! ERROR: "imx_pcm_dma_init" [sound/soc/fsl/snd-soc-imx-ssi.ko] undefined! ERROR: "imx_pcm_fiq_exit" [sound/soc/fsl/snd-soc-imx-ssi.ko] undefined! ERROR: "imx_pcm_dma_exit" [sound/soc/fsl/snd-soc-imx-ssi.ko] undefined! ERROR: "imx_pcm_dma_init" [sound/soc/fsl/snd-soc-fsl-ssi.ko] undefined! ERROR: "imx_pcm_dma_exit" [sound/soc/fsl/snd-soc-fsl-ssi.ko] undefined! Fix this by allowing SND_SOC_IMX_PCM_FIQ and SND_SOC_IMX_PCM_DMA to be also built as modules and by using 'IS_ENABLED' to cover the module case. Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-18ASoC: imx-mc13783: Depend on ARCH_ARMMark Brown1-1/+1
The driver uses the machine type macros so depends on ARM. Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-16ASoC: imx: Enable COMPILE_TEST buildsMark Brown1-1/+1
Since DT based boards don't have any dependency on arch/arm enable them if COMPILE_TEST is enabled. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-12ASoC: fsl: add imx-wm8962 machine driverNicolin Chen1-0/+12
This is the initial imx-wm8962 device-tree-only machine driver working with fsl_ssi driver. More features can be added on top of it later. Signed-off-by: Nicolin Chen <b42378@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-05-15ASoC: fsl: remove imx-pcm driverShawn Guo1-5/+0
With imx-pcm-dma moving to generic dmaengine pcm driver and the removal of imx-pcm-audio/imx-fiq-pcm-audio platform device use, now imx-pcm driver contains a few functions that are only used by imx-pcm-fiq.c. Move these functions into imx-pcm-fiq.c and remove imx-pcm.c completely. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-17ASoC: imx: Use generic dmaengine PCMLars-Peter Clausen1-1/+1
Use the generic dmaengine PCM driver instead of a custom implementation. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-28Revert "ASoC: fsl: fix multiple definition of init_module"Shawn Guo1-2/+7
This reverts commit 25b8d31488a3fb3611651991969526b2ea475764. While the commit fixes multiple init_module definition error with module build, it breaks build when both imx-pcm-fiq and imx-pcm-dma are built in as below. LD sound/soc/fsl/snd-soc-fsl-ssi.o LD sound/soc/fsl/snd-soc-fsl-utils.o LD sound/soc/fsl/snd-soc-imx-ssi.o LD sound/soc/fsl/snd-soc-imx-audmux.o LD sound/soc/fsl/snd-soc-imx-pcm-fiq.o LD sound/soc/fsl/snd-soc-imx-pcm-dma.o LD sound/soc/fsl/snd-soc-eukrea-tlv320.o LD sound/soc/fsl/snd-soc-imx-sgtl5000.o LD sound/soc/fsl/snd-soc-imx-mc13783.o LD sound/soc/fsl/built-in.o sound/soc/fsl/snd-soc-imx-pcm-dma.o: In function `imx_pcm_free': imx-pcm.c:(.text+0x464): multiple definition of `imx_pcm_free' sound/soc/fsl/snd-soc-imx-pcm-fiq.o:imx-pcm-fiq.c:(.text+0x1a8): first defined here sound/soc/fsl/snd-soc-imx-pcm-dma.o: In function `snd_imx_pcm_mmap': imx-pcm.c:(.text+0x35c): multiple definition of `snd_imx_pcm_mmap' sound/soc/fsl/snd-soc-imx-pcm-fiq.o:imx-pcm-fiq.c:(.text+0xa0): first defined here sound/soc/fsl/snd-soc-imx-pcm-dma.o: In function `imx_pcm_new': imx-pcm.c:(.text+0x3dc): multiple definition of `imx_pcm_new' sound/soc/fsl/snd-soc-imx-pcm-fiq.o:imx-pcm-fiq.c:(.text+0x120): first defined here make[4]: *** [sound/soc/fsl/built-in.o] Error 1 Let's revert the commit and find a proper fix for multiple init_module definition error later. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-12ASoC: fsl: fix multiple definition of init_moduleShawn Guo1-7/+2
With commit f2818d0 (ASoC: fsl: fix miscompilation of snd-soc-imx-pcm), we will see the following build error when building modules with CONFIG_SND_IMX_SOC=m in imx_v6_v7_defconfig. CC [M] sound/soc/fsl/phycore-ac97.o LD [M] sound/soc/fsl/snd-soc-fsl-ssi.o LD [M] sound/soc/fsl/snd-soc-fsl-utils.o LD [M] sound/soc/fsl/snd-soc-imx-ssi.o LD [M] sound/soc/fsl/snd-soc-imx-audmux.o LD [M] sound/soc/fsl/snd-soc-imx-pcm.o sound/soc/fsl/imx-pcm-dma.o: In function `init_module': imx-pcm-dma.c:(.init.text+0x0): multiple definition of `init_module' sound/soc/fsl/imx-pcm-fiq.o:imx-pcm-fiq.c:(.init.text+0x0): first defined here sound/soc/fsl/imx-pcm-dma.o: In function `cleanup_module': imx-pcm-dma.c:(.exit.text+0x0): multiple definition of `cleanup_module' sound/soc/fsl/imx-pcm-fiq.o:imx-pcm-fiq.c:(.exit.text+0x0): first defined here make[4]: *** [sound/soc/fsl/snd-soc-imx-pcm.o] Error 1 Instead of using bool for SND_SOC_IMX_PCM_FIQ and SND_SOC_IMX_PCM_DMA to fix the original issue, we should completely remove SND_SOC_IMX_PCM and have imx-pcm.o statically linked with imx-pcm-fiq.o or imx-pcm-dma.o. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-02Merge remote-tracking branch 'asoc/topic/fsl' into asoc-nextMark Brown1-1/+15
2012-11-27ASoC: fsl: fix miscompilation of snd-soc-imx-pcmLothar Waßmann1-2/+2
Hi Mark, thanks your insisting on a better description for the patch, I found a more appropriate solution for the problem: Compiling the SoC Audio driver for Freescale i.MX as a module (CONFIG_SND_SOC_IMX_PCM=m) results in a non-functional sound driver indicated by the error message: | imx-sgtl5000 sound.1: platform imx-pcm-audio not registered | imx-sgtl5000 sound.1: snd_soc_register_card failed (-517) | platform sound.1: Driver imx-sgtl5000 requests probe deferral instead of the message: | imx-sgtl5000 sound.1: sgtl5000 <-> 63fcc000.ssi mapping ok that is to be expected upon loading the snd-soc-imx-pcm.ko module. The build log reveals, that the file imx-pcm-dma.o (or imx-pcm-fiq.o depending on the kernel configuration), which should be linked together with imx-pcm.o into snd-imx-pcm.ko, is not being compiled in this case. The make rules for these files shows that the target object imx-pcm.o is assigned to the variable snd-soc-imx-pcm-y while imx-pcm-{dma,fiq}.o are added to to snd-soc-imx-pcm-$(CONFIG_SND_SOC_IMX_PCM_DMA) and snd-soc-imx-pcm-$(CONFIG_SND_SOC_IMX_PCM_FIQ) which resolve to snd-soc-imx-pcm-m in this case. According to Documentation/kbuild/modules.txt: |When the module is built from multiple sources, an additional line is |needed listing the files: | | <module_name>-y := <src1>.o <src2>.o ... Thus the type of the config variables CONFIG_SND_SOC_IMX_PCM_DMA and CONFIG_SND_SOC_IMX_PCM_FIQ should be 'bool' instead of 'tristate' to resolve to 'y' when selected. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-24ASoC: fsl: remove CONFIG_EXPERIMENTALKees Cook1-1/+1
This config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-22ASoC: add support for the Freescale / iVeia P1022 RDK reference boardTimur Tabi1-0/+14
This small reference boards has a Freescale P1022 dual-core PowerPC SOC and a Wolfson Microelectronics WM8960 codec. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22ASoC: fsl: add PPC_MPC52xx dependency to SND_POWERPC_SOCEric Millbrandt1-1/+1
mpc52xx socs do not define FSL_SOC but need SND_POWERPC_SOC defined to build ASoC drivers. Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-24Merge tag 'sound-3.5' of ↵Linus Torvalds1-7/+122
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This is the first big chunk for 3.5 merges of sound stuff. There are a few big changes in different areas. First off, the streaming logic of USB-audio endpoints has been largely rewritten for the better support of "implicit feedback". If anything about USB got broken, this change has to be checked. For HD-audio, the resume procedure was changed; instead of delaying the resume of the hardware until the first use, now waking up immediately at resume. This is for buggy BIOS. For ASoC, dynamic PCM support and the improved support for digital links between off-SoC devices are major framework changes. Some highlights are below: * HD-audio - Avoid accesses of invalid pin-control bits that may stall the codec - V-ref setup cleanups - Fix the races in power-saving code - Fix the races in codec cache hashes and connection lists - Split some common codes for BIOS auto-parser to hda_auto_parser.c - Changed the PM resume code to wake up immediately for buggy BIOS - Creative SoundCore3D support - Add Conexant CX20751/2/3/4 codec support * ASoC - Dynamic PCM support, allowing support for SoCs with internal routing through components with tight sequencing and formatting constraints within their internal paths or where there are multiple components connected with CPU managed DMA controllers inside the SoC. - Greatly improved support for direct digital links between off-SoC devices, providing a much simpler way of connecting things like digital basebands to CODECs. - Much more fine grained and robust locking, cleaning up some of the confusion that crept in with multi-component. - CPU support for nVidia Tegra 30 I2S and audio hub controllers and ST-Ericsson MSP I2S controolers - New CODEC drivers for Cirrus CS42L52, LAPIS Semiconductor ML26124, Texas Instruments LM49453. - Some regmap changes needed by the Tegra I2S driver. - mc13783 audio support. * Misc - Rewrite with module_pci_driver() - Xonar DGX support for snd-oxygen - Improvement of packet handling in snd-firewire driver - New USB-endpoint streaming logic - Enhanced M-audio FTU quirks and relevant cleanups - Increment the support of OSS devices to 256 - snd-aloop accuracy improvement There are a few more pending changes for 3.5, but they will be sent slightly later as partly depending on the changes of DRM." Fix up conflicts in regmap (due to duplicate patches, with some further updates then having already come in from the regmap tree). Also some fairly trivial context conflicts in the imx and mcx soc drivers. * tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (280 commits) ALSA: snd-usb: fix stream info output in /proc ALSA: pcm - Add proper state checks to snd_pcm_drain() ALSA: sh: Fix up namespace collision in sh_dac_audio. ALSA: hda/realtek - Fix unused variable compile warning ASoC: sh: fsi: enable chip specific data transfer mode ASoC: sh: fsi: call fsi_hw_startup/shutdown from fsi_dai_trigger() ASoC: sh: fsi: use same format for IN/OUT ASoC: sh: fsi: add fsi_version() and removed meaningless version check ASoC: sh: fsi: use register field macro name on IN/OUT_DMAC ASoC: tegra: Add machine driver for WM8753 codec ALSA: hda - Fix possible races of accesses to connection list array ASoC: OMAP: HDMI: Introduce codec ARM: mx31_3ds: Add sound support ASoC: imx-mc13783 cleanup mx31moboard: Add sound support ASoC: mc13783 codec cleanups ASoC: add imx-mc13783 sound support ASoC: Add mc13783 codec mfd: mc13xxx: add codec platform data ASoC: don't flip master of DT-instantiated DAI links ...
2012-05-18ASoC: add imx-mc13783 sound supportPhilippe Rétornaz1-0/+8
Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-04ASoC: fsl: remove redundant Kconfig dependency on SND_SOC_POWERPC_DMAShawn Guo1-1/+0
Kconfig option SND_SOC_POWERPC_DMA is under menuconfig SND_POWERPC_SOC. Since SND_POWERPC_SOC already depends on FSL_SOC, there is no need for SND_SOC_POWERPC_DMA to do the same. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-04ASoC: fsl: remove redundant Kconfig option SND_SOC_FSL_SSIShawn Guo1-4/+0
While commit 606d620 (ASoC: imx: merge sound/soc/imx into sound/soc/fsl) adds SND_SOC_FSL_SSI outside "menuconfig SND_POWERPC_SOC" to make it visible for both PowerPC and ARM/IMX, it forgot removing the one inside "menuconfig SND_POWERPC_SOC". Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01ASoC: fsl: add imx-sgtl5000 machine driverShawn Guo1-0/+12
This is the initial imx-sgtl5000 machine driver support with only playback dai link implemented. More features can be added on top of it later. It's a device tree only machine driver working with fsl_ssi driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01ASoC: fsl: create fsl_utils to accommodate the common functionsShawn Guo1-0/+5
There is some amount of code duplication between mpc8610_hpcd and p1022_ds machine drivers, and the same code will be duplicated again when another new machine driver is added. The patch creates fsl_utils to accommodate the common functions to stop the code duplication. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01ASoC: fsl: rename imx-pcm Kconfig options and filenameShawn Guo1-6/+6
Rename a couple of imx-pcm Kconfig options and filename to get them well named and less confusing. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01ASoC: imx: merge sound/soc/imx into sound/soc/fslShawn Guo1-0/+92
Freescale PowerPC and ARM/IMX families share the same SSI IP block. The patch merges sound/soc/imx into sound/soc/fsl, so that the possible code sharing and consolidation can happen. This is a plain merge, except that menuconfig SND_POWERPC_SOC is added in Kconfig for PowerPC platform as a correspondence to SND_IMX_SOC for IMX platform. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01ASoC: fsl: separate SSI and DMA Kconfig optionsShawn Guo1-6/+9
The fsl_ssi driver will possibly be shared between Freescale PowerPC and ARM/IMX families, so give it a separate Kconfig option. Then fsl_ssi driver can possibly be selected independently from selecting PowerPC DMA based PCM driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-20ASoC: add support for the Freescale P1022 DS reference boardTimur Tabi1-6/+18
The Freescale P1022 is a dual-core e500-based SOC with multimedia capabilities, specifically the same SSI audio controller on the MPC8610. The P1022 DS reference board includes a P1022 and a Wolfson Microelectronics WM8776 codec. Signed-off-by: Timur Tabi <timur@freescale.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-08-12ASoC: multi-component - ASoC Multi-Component SupportLiam Girdwood1-3/+0
This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-06-30ASoC: remove BROKEN from Efika and pcm030 fabric driversGrant Likely1-2/+2
The needed spin_event_timeout() macro is now merged in from the powerpc tree, so these drivers are no longer broken. This reverts commit 0c0e09e21a9e7bc6ca54e06ef3d497255ca26383 (ASoC: Mark MPC5200 AC97 as BROKEN until PowerPC merge issues are resolved) Tested against 2.6.31-rc1. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Jon Smirl <jonsmirl@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-30ASoC: Fix typo in MPC5200 PSC AC97 driver KconfigGrant Likely1-1/+1
ALSA SoC drivers should be specify SND_SOC_AC97_BUS instead, not AC97_BUS. Without SND_SOC_AC97_BUS defined, an AC97 device will not get correctly registered on the AC97 bus, which prevents thinks like the WM9712 touchscreen driver from getting probed. Tested against 2.6.31-rc1. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Jon Smirl <jonsmirl@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-27ASoC: Mark MPC5200 AC97 as BROKEN until PowerPC merge issues are resolvedMark Brown1-3/+4
These drivers use spin_event_timeout() which is only present in the PowerPC tree at present and which is undergoing some API revisions so temporarily mark them as BROKEN until these issues are sorted out. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-27ASoC: Fabric bindings for STAC9766 on the EfikaJon Smirl1-0/+8
Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-27ASoC: Support for AC97 on Phytec pmc030 base board.Jon Smirl1-0/+7
A wm9712 AC97 codec is used. Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-27ASoC: AC97 driver for mpc5200Jon Smirl1-0/+11
I've implemented retries for when the AC97 hardware doesn't reset on first try. About 10% of the time both the Efika and pcm030 AC97 codecs don't reset on first try and need to be poked multiple times. Failure is indicated by not having the link clock start ticking. Every once in a while even five pokes won't get the link started and I have to power cycle. Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-27ASoC: Main rewite of the mpc5200 audio DMA codeJon Smirl1-1/+0
Rewrite the mpc5200 audio DMA code to support both I2S and AC97. Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-24ASoC: Basic split of mpc5200 DMA code out of mpc5200_psc_i2sJon Smirl1-0/+4
Basic split of mpc5200 DMA code out from i2s into a standalone file. Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-04ASoC: Remove BROKEN from mpc5200 kconfigTakashi Iwai1-1/+1
The regression was fixed by commit 3e5b50165fd0be080044586f43fcdd460ed27610, so no need to mark this driver as BROKEN. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-04-27ASoC: Set the MPC5200 i2s driver to BROKEN status.Jon Smirl1-1/+1
Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-23ASoC: remove stand-alone mode support from CS4270 codec driverTimur Tabi1-1/+2
The CS4270 supports stand-alone mode, where the codec is not connect to the I2C or SPI buses. Instead, input voltages configure the codec at power-on. The CS4270 ASoC device driver has partial support for this mode, but the code was never tested, and partial support doesn't help anyone. It also made the rest of the code more complicated than necessary. [Removed redundant CS4270 dependency on I2C -- broonie] Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-01-20ASoC: Allow Freescale MPC8610 audio drivers to be compiled as modulesTimur Tabi1-8/+8
Change the Kconfig and Makefile options for Freescale MPC8610 audio drivers so that they can be compiled as modules, and simplify the Kconfig choices so that only the platform is selected. Also fix the naming of the driver files to conform to ALSA standards. [Removed extraneous SND_SOC dependency -- broonie] Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-01ALSA: ASoC: Remove superfluous dependency on SND_SOCTakashi Iwai1-1/+1
The dependency on SND_SOC is already fulfilled in sound/soc/Kconfig, thus no more need in Kconfig of each sub directory. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-11-14powerpc/mpc5200: fix bestcomm Kconfig dependenciesGrant Likely1-1/+2
Without this patch it is possible to select drivers which require bestcomm support without bestcomm support being selected. This patch reworks the bestcomm dependencies to ensure the correct bestcomm tasks are always enabled. Reported-by: Hans Lehmann <hans.lehmann@ritter-elektronik.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-07-29ALSA: ASoC: Add mpc5200-psc I2S driverGrant Likely1-0/+7
This is an I2S bus driver for the MPC5200 PSC device. It depends on the soc-of helper functions to match a PSC device with a codec based on data in the device tree. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-29ALSA: ASoC: Add OpenFirmware helper for matching bus and codec driversGrant Likely1-0/+3
Simple utility layer for creating ASoC machine instances based on data in the OpenFirmware device tree. OF aware platform drivers and codec drivers register themselves with this framework and the framework automatically instantiates a machine driver. At the moment, the driver is not very capable and it is expected to be extended as more features are needed for specifying the configuration in the device tree. This is most likely temporary glue code to work around limitations in the ASoC v1 framework. When v2 is merged, most of this driver will need to be reworked. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-14ALSA: asoc: kbuild - only show menus for the current ASoC CPU platform.Liam Girdwood1-4/+0
We don't want to see ASoC platform menus for other non selected architectures in our config. Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-27sound: Convert to menuconfigTakashi Iwai1-1/+1
Convert menu in sound Kconfig files to menuconfig and if. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-01-31[ALSA] Add ASoC drivers for the Freescale MPC8610 SoCTimur Tabi1-0/+20
Add the ASoC drivers for the Freescale MPC8610 SoC and the MPC8610 HPCD reference board. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-01 09:27:55 +0300