summaryrefslogtreecommitdiff
path: root/samples
AgeCommit message (Collapse)AuthorFilesLines
2017-12-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller1-2/+12
Daniel Borkmann says: ==================== pull-request: bpf 2017-12-02 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix a compilation warning in xdp redirect tracepoint due to missing bpf.h include that pulls in struct bpf_map, from Xie. 2) Limit the maximum number of attachable BPF progs for a given perf event as long as uabi is not frozen yet. The hard upper limit is now 64 and therefore the same as with BPF multi-prog for cgroups. Also add related error checking for the sample BPF loader when enabling and attaching to the perf event, from Yonghong. 3) Specifically set the RLIMIT_MEMLOCK for the test_verifier_log case, so that the test case can always pass and not fail in some environments due to too low default limit, also from Yonghong. 4) Fix up a missing license header comment for kernel/bpf/offload.c, from Jakub. 5) Several fixes for bpftool, among others a crash on incorrect arguments when json output is used, error message handling fixes on unknown options and proper destruction of json writer for some exit cases, all from Quentin. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-01samples/bpf: add error checking for perf ioctl calls in bpf loaderYonghong Song1-2/+12
load_bpf_file() should fail if ioctl with command PERF_EVENT_IOC_ENABLE and PERF_EVENT_IOC_SET_BPF fails. When they do fail, proper error messages are printed. With this change, the below "syscall_tp" run shows that the maximum number of bpf progs attaching to the same perf tracepoint is indeed enforced. $ ./syscall_tp -i 64 prog #0: map ids 4 5 ... prog #63: map ids 382 383 $ ./syscall_tp -i 65 prog #0: map ids 4 5 ... prog #64: map ids 388 389 ioctl PERF_EVENT_IOC_SET_BPF failed err Argument list too long Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-11-18kbuild: remove all dummy assignments to obj-Masahiro Yamada6-18/+0
Now kbuild core scripts create empty built-in.o where necessary. Remove "obj- := dummy.o" tricks. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-16Merge tag 'media/v4.15-1' of ↵Linus Torvalds1-2/+4
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - Documentation for digital TV (both kAPI and uAPI) are now in sync with the implementation (except for legacy/deprecated ioctls). This is a major step, as there were always a gap there - New sensor driver: imx274 - New cec driver: cec-gpio - New platform driver for rockship rga and tegra CEC - New RC driver: tango-ir - Several cleanups at atomisp driver - Core improvements for RC, CEC, V4L2 async probing support and DVB - Lots of drivers cleanup, fixes and improvements. * tag 'media/v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (332 commits) dvb_frontend: don't use-after-free the frontend struct media: dib0700: fix invalid dvb_detach argument media: v4l2-ctrls: Don't validate BITMASK twice media: s5p-mfc: fix lockdep warning media: dvb-core: always call invoke_release() in fe_free() media: usb: dvb-usb-v2: dvb_usb_core: remove redundant code in dvb_usb_fe_sleep media: au0828: make const array addr_list static media: cx88: make const arrays default_addr_list and pvr2000_addr_list static media: drxd: make const array fastIncrDecLUT static media: usb: fix spelling mistake: "synchronuously" -> "synchronously" media: ddbridge: fix build warnings media: av7110: avoid 2038 overflow in debug print media: Don't do DMA on stack for firmware upload in the AS102 driver media: v4l: async: fix unregister for implicitly registered sub-device notifiers media: v4l: async: fix return of unitialized variable ret media: imx274: fix missing return assignment from call to imx274_mode_regs media: camss-vfe: always initialize reg at vfe_set_xbar_cfg() media: atomisp: make function calls cleaner media: atomisp: get rid of storage_class.h media: atomisp: get rid of wrong stddef.h include ...
2017-11-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds35-493/+2958
Pull networking updates from David Miller: "Highlights: 1) Maintain the TCP retransmit queue using an rbtree, with 1GB windows at 100Gb this really has become necessary. From Eric Dumazet. 2) Multi-program support for cgroup+bpf, from Alexei Starovoitov. 3) Perform broadcast flooding in hardware in mv88e6xxx, from Andrew Lunn. 4) Add meter action support to openvswitch, from Andy Zhou. 5) Add a data meta pointer for BPF accessible packets, from Daniel Borkmann. 6) Namespace-ify almost all TCP sysctl knobs, from Eric Dumazet. 7) Turn on Broadcom Tags in b53 driver, from Florian Fainelli. 8) More work to move the RTNL mutex down, from Florian Westphal. 9) Add 'bpftool' utility, to help with bpf program introspection. From Jakub Kicinski. 10) Add new 'cpumap' type for XDP_REDIRECT action, from Jesper Dangaard Brouer. 11) Support 'blocks' of transformations in the packet scheduler which can span multiple network devices, from Jiri Pirko. 12) TC flower offload support in cxgb4, from Kumar Sanghvi. 13) Priority based stream scheduler for SCTP, from Marcelo Ricardo Leitner. 14) Thunderbolt networking driver, from Amir Levy and Mika Westerberg. 15) Add RED qdisc offloadability, and use it in mlxsw driver. From Nogah Frankel. 16) eBPF based device controller for cgroup v2, from Roman Gushchin. 17) Add some fundamental tracepoints for TCP, from Song Liu. 18) Remove garbage collection from ipv6 route layer, this is a significant accomplishment. From Wei Wang. 19) Add multicast route offload support to mlxsw, from Yotam Gigi" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2177 commits) tcp: highest_sack fix geneve: fix fill_info when link down bpf: fix lockdep splat net: cdc_ncm: GetNtbFormat endian fix openvswitch: meter: fix NULL pointer dereference in ovs_meter_cmd_reply_start netem: remove unnecessary 64 bit modulus netem: use 64 bit divide by rate tcp: Namespace-ify sysctl_tcp_default_congestion_control net: Protect iterations over net::fib_notifier_ops in fib_seq_sum() ipv6: set all.accept_dad to 0 by default uapi: fix linux/tls.h userspace compilation error usbnet: ipheth: prevent TX queue timeouts when device not ready vhost_net: conditionally enable tx polling uapi: fix linux/rxrpc.h userspace compilation errors net: stmmac: fix LPI transitioning for dwmac4 atm: horizon: Fix irq release error net-sysfs: trigger netlink notification on ifalias change via sysfs openvswitch: Using kfree_rcu() to simplify the code openvswitch: Make local function ovs_nsh_key_attr_size() static openvswitch: Fix return value check in ovs_meter_cmd_features() ...
2017-11-15Merge branch 'for-linus' of ↵Linus Torvalds8-3/+932
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching Pull livepatching updates from Jiri Kosina: - shadow variables support, allowing livepatches to associate new "shadow" fields to existing data structures, from Joe Lawrence - pre/post patch callbacks API, allowing livepatch writers to register callbacks to be called before and after patch application, from Joe Lawrence * 'for-linus' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching: livepatch: __klp_disable_patch() should never be called for disabled patches livepatch: Correctly call klp_post_unpatch_callback() in error paths livepatch: add transition notices livepatch: move transition "complete" notice into klp_complete_transition() livepatch: add (un)patch callbacks livepatch: Small shadow variable documentation fixes livepatch: __klp_shadow_get_or_alloc() is local to shadow.c livepatch: introduce shadow variable API
2017-11-15Merge branch 'for-linus' of ↵Linus Torvalds1-5/+5
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "The usual rocket-science from trivial tree for 4.15" * 'for-linus' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: MAINTAINERS: relinquish kconfig MAINTAINERS: Update my email address treewide: Fix typos in Kconfig kfifo: Fix comments init/Kconfig: Fix module signing document location misc: ibmasm: Return error on error path HID: logitech-hidpp: fix mistake in printk, "feeback" -> "feedback" MAINTAINERS: Correct path to uDraw PS3 driver tracing: Fix doc mistakes in trace sample tracing: Kconfig text fixes for CONFIG_HWLAT_TRACER MIPS: Alchemy: Remove reverted CONFIG_NETLINK_MMAP from db1xxx_defconfig mm/huge_memory.c: fixup grammar in comment lib/xz: Add fall-through comments to a switch statement
2017-11-15Merge tag 'vfio-v4.15-rc1' of git://github.com/awilliam/linux-vfioLinus Torvalds1-1/+1
Pull VFIO updates from Alex Williamson: - Virtualize PCI MPS and MRRS registers - Avoid soft lockups on SPAPR when clearing TCE - Broadcom FlexRM platform device support - Samples driver cleanup & type1 integer overflow fix * tag 'vfio-v4.15-rc1' of git://github.com/awilliam/linux-vfio: vfio: platform: reset: Add Broadcom FlexRM reset module vfio/type1: silence integer overflow warning vfio-mdev/samples: make mdev_fops const and static vfio/spapr: Add cond_resched() for huge updates vfio/pci: Virtualize Maximum Read Request Size vfio/pci: Virtualize Maximum Payload Size
2017-11-15Merge tag 'configfs-for-4.15' of git://git.infradead.org/users/hch/configfsLinus Torvalds1-4/+4
Pull configfs updates from Christoph Hellwig: "A couple of configfs cleanups: - proper use of the bool type (Thomas Meyer) - constification of struct config_item_type (Bhumika Goyal)" * tag 'configfs-for-4.15' of git://git.infradead.org/users/hch/configfs: RDMA/cma: make config_item_type const stm class: make config_item_type const ACPI: configfs: make config_item_type const nvmet: make config_item_type const usb: gadget: configfs: make config_item_type const PCI: endpoint: make config_item_type const iio: make function argument and some structures const usb: gadget: make config_item_type structures const dlm: make config_item_type const netconsole: make config_item_type const nullb: make config_item_type const ocfs2/cluster: make config_item_type const target: make config_item_type const configfs: make ci_type field, some pointers and function arguments const configfs: make config_item_type const configfs: Fix bool initialization/comparison
2017-11-14Merge tag 'staging-4.15-rc1' into v4l_for_linusMauro Carvalho Chehab2-4/+12
There are some conflicts between staging and media trees, as reported by Stephen Rothwell <sfr@canb.auug.org.au>. So, merge from staging. * tag 'staging-4.15-rc1': (775 commits) staging: lustre: add SPDX identifiers to all lustre files staging: greybus: Remove redundant license text staging: greybus: add SPDX identifiers to all greybus driver files staging: ccree: simplify ioread/iowrite staging: ccree: simplify registers access staging: ccree: simplify error handling logic staging: ccree: remove dead code staging: ccree: handle limiting of DMA masks staging: ccree: copy IV to DMAable memory staging: fbtft: remove redundant initialization of buf staging: sm750fb: Fix parameter mistake in poke32 staging: wilc1000: Fix bssid buffer offset in Txq staging: fbtft: fb_ssd1331: fix mirrored display staging: android: Fix checkpatch.pl error staging: greybus: loopback: convert loopback to use generic async operations staging: greybus: operation: add private data with get/set accessors staging: greybus: loopback: Fix iteration count on async path staging: greybus: loopback: Hold per-connection mutex across operations staging: greybus/loopback: use ktime_get() for time intervals staging: fsl-dpaa2/eth: Extra headroom in RX buffers ... Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-11-14xdp: sample: Missing curly braces in read_route()Dan Carpenter1-2/+3
The assert statement is supposed to be part of the else branch but the curly braces were accidentally left off. Fixes: 3e29cd0e6563 ("xdp: Sample xdp program implementing ip forward") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-14Merge branch 'perf-core-for-linus' of ↵Linus Torvalds2-68/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "The main changes in this cycle were: Kernel: - kprobes updates: use better W^X patterns for code modifications, improve optprobes, remove jprobes. (Masami Hiramatsu, Kees Cook) - core fixes: event timekeeping (enabled/running times statistics) fixes, perf_event_read() locking fixes and cleanups, etc. (Peter Zijlstra) - Extend x86 Intel free-running PEBS support and support x86 user-register sampling in perf record and perf script. (Andi Kleen) Tooling: - Completely rework the way inline frames are handled. Instead of querying for the inline nodes on-demand in the individual tools, we now create proper callchain nodes for inlined frames. (Milian Wolff) - 'perf trace' updates (Arnaldo Carvalho de Melo) - Implement a way to print formatted output to per-event files in 'perf script' to facilitate generate flamegraphs, elliminating the need to write scripts to do that separation (yuzhoujian, Arnaldo Carvalho de Melo) - Update vendor events JSON metrics for Intel's Broadwell, Broadwell Server, Haswell, Haswell Server, IvyBridge, IvyTown, JakeTown, Sandy Bridge, Skylake, SkyLake Server - and Goldmont Plus V1 (Andi Kleen, Kan Liang) - Multithread the synthesizing of PERF_RECORD_ events for pre-existing threads in 'perf top', speeding up that phase, greatly improving the user experience in systems such as Intel's Knights Mill (Kan Liang) - Introduce the concept of weak groups in 'perf stat': try to set up a group, but if it's not schedulable fallback to not using a group. That gives us the best of both worlds: groups if they work, but still a usable fallback if they don't. E.g: (Andi Kleen) - perf sched timehist enhancements (David Ahern) - ... various other enhancements, updates, cleanups and fixes" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (139 commits) kprobes: Don't spam the build log with deprecation warnings arm/kprobes: Remove jprobe test case arm/kprobes: Fix kretprobe test to check correct counter perf srcline: Show correct function name for srcline of callchains perf srcline: Fix memory leak in addr2inlines() perf trace beauty kcmp: Beautify arguments perf trace beauty: Implement pid_fd beautifier tools include uapi: Grab a copy of linux/kcmp.h perf callchain: Fix double mapping al->addr for children without self period perf stat: Make --per-thread update shadow stats to show metrics perf stat: Move the shadow stats scale computation in perf_stat__update_shadow_stats perf tools: Add perf_data_file__write function perf tools: Add struct perf_data_file perf tools: Rename struct perf_data_file to perf_data perf script: Print information about per-event-dump files perf trace beauty prctl: Generate 'option' string table from kernel headers tools include uapi: Grab a copy of linux/prctl.h perf script: Allow creating per-event dump files perf evsel: Restore evsel->priv as a tool private area perf script: Use event_format__fprintf() ...
2017-11-13Merge branch 'locking-core-for-linus' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core locking updates from Ingo Molnar: "The main changes in this cycle are: - Another attempt at enabling cross-release lockdep dependency tracking (automatically part of CONFIG_PROVE_LOCKING=y), this time with better performance and fewer false positives. (Byungchul Park) - Introduce lockdep_assert_irqs_enabled()/disabled() and convert open-coded equivalents to lockdep variants. (Frederic Weisbecker) - Add down_read_killable() and use it in the VFS's iterate_dir() method. (Kirill Tkhai) - Convert remaining uses of ACCESS_ONCE() to READ_ONCE()/WRITE_ONCE(). Most of the conversion was Coccinelle driven. (Mark Rutland, Paul E. McKenney) - Get rid of lockless_dereference(), by strengthening Alpha atomics, strengthening READ_ONCE() with smp_read_barrier_depends() and thus being able to convert users of lockless_dereference() to READ_ONCE(). (Will Deacon) - Various micro-optimizations: - better PV qspinlocks (Waiman Long), - better x86 barriers (Michael S. Tsirkin) - better x86 refcounts (Kees Cook) - ... plus other fixes and enhancements. (Borislav Petkov, Juergen Gross, Miguel Bernal Marin)" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits) locking/x86: Use LOCK ADD for smp_mb() instead of MFENCE rcu: Use lockdep to assert IRQs are disabled/enabled netpoll: Use lockdep to assert IRQs are disabled/enabled timers/posix-cpu-timers: Use lockdep to assert IRQs are disabled/enabled sched/clock, sched/cputime: Use lockdep to assert IRQs are disabled/enabled irq_work: Use lockdep to assert IRQs are disabled/enabled irq/timings: Use lockdep to assert IRQs are disabled/enabled perf/core: Use lockdep to assert IRQs are disabled/enabled x86: Use lockdep to assert IRQs are disabled/enabled smp/core: Use lockdep to assert IRQs are disabled/enabled timers/hrtimer: Use lockdep to assert IRQs are disabled/enabled timers/nohz: Use lockdep to assert IRQs are disabled/enabled workqueue: Use lockdep to assert IRQs are disabled/enabled irq/softirqs: Use lockdep to assert IRQs are disabled/enabled locking/lockdep: Add IRQs disabled/enabled assertion APIs: lockdep_assert_irqs_enabled()/disabled() locking/pvqspinlock: Implement hybrid PV queued/unfair locks locking/rwlocks: Fix comments x86/paravirt: Set up the virt_spin_lock_key after static keys get initialized block, locking/lockdep: Assign a lock_class per gendisk used for wait_for_completion() workqueue: Remove now redundant lock acquisitions wrt. workqueue flushes ...
2017-11-13Merge branch 'for-linus' of ↵Linus Torvalds1-0/+8
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Heiko Carstens: "Since Martin is on vacation you get the s390 pull request for the v4.15 merge window this time from me. Besides a lot of cleanups and bug fixes these are the most important changes: - a new regset for runtime instrumentation registers - hardware accelerated AES-GCM support for the aes_s390 module - support for the new CEX6S crypto cards - support for FORTIFY_SOURCE - addition of missing z13 and new z14 instructions to the in-kernel disassembler - generate opcode tables for the in-kernel disassembler out of a simple text file instead of having to manually maintain those tables - fast memset16, memset32 and memset64 implementations - removal of named saved segment support - hardware counter support for z14 - queued spinlocks and queued rwlocks implementations for s390 - use the stack_depth tracking feature for s390 BPF JIT - a new s390_sthyi system call which emulates the sthyi (store hypervisor information) instruction - removal of the old KVM virtio transport - an s390 specific CPU alternatives implementation which is used in the new spinlock code" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (88 commits) MAINTAINERS: add virtio-ccw.h to virtio/s390 section s390/noexec: execute kexec datamover without DAT s390: fix transactional execution control register handling s390/bpf: take advantage of stack_depth tracking s390: simplify transactional execution elf hwcap handling s390/zcrypt: Rework struct ap_qact_ap_info. s390/virtio: remove unused header file kvm_virtio.h s390: avoid undefined behaviour s390/disassembler: generate opcode tables from text file s390/disassembler: remove insn_to_mnemonic() s390/dasd: avoid calling do_gettimeofday() s390: vfio-ccw: Do not attempt to free no-op, test and tic cda. s390: remove named saved segment support s390/archrandom: Reconsider s390 arch random implementation s390/pci: do not require AIS facility s390/qdio: sanitize put_indicator s390/qdio: use atomic_cmpxchg s390/nmi: avoid using long-displacement facility s390: pass endianness info to sparse s390/decompressor: remove informational messages ...
2017-11-13Merge tag 'docs-4.15' of git://git.lwn.net/linuxLinus Torvalds1-3/+3
Pull documentation updates from Jonathan Corbet: "A relatively calm cycle for the docs tree again. - The old driver statement has been added to the kernel docs. - We have a couple of new helper scripts. find-unused-docs.sh from Sayli Karnic will point out kerneldoc comments that are not actually used in the documentation. Jani Nikula's documentation-file-ref-check finds references to non-existing files. - A new ftrace document from Steve Rostedt. - Vinod Koul converted the dmaengine docs to RST Beyond that, it's mostly simple fixes. This set reaches outside of Documentation/ a bit more than most. In all cases, the changes are to comment docs, mostly from Randy, in places where there didn't seem to be anybody better to take them" * tag 'docs-4.15' of git://git.lwn.net/linux: (52 commits) documentation: fb: update list of available compiled-in fonts MAINTAINERS: update DMAengine documentation location dmaengine: doc: ReSTize pxa_dma doc dmaengine: doc: ReSTize dmatest doc dmaengine: doc: ReSTize client API doc dmaengine: doc: ReSTize provider doc dmaengine: doc: Add ReST style dmaengine document ftrace/docs: Add documentation on how to use ftrace from within the kernel bug-hunting.rst: Fix an example and a typo in a Sphinx tag scripts: Add a script to find unused documentation samples: Convert timers to use timer_setup() documentation: kernel-api: add more info on bitmap functions Documentation: fix selftests related file refs Documentation: fix ref to power basic-pm-debugging Documentation: fix ref to trace stm content Documentation: fix ref to coccinelle content Documentation: fix ref to workqueue content Documentation: fix ref to sphinx/kerneldoc.py Documentation: fix locking rt-mutex doc refs docs: dev-tools: correct Coccinelle version number ...
2017-11-11bpf: Revert bpf_overrid_function() helper changes.David S. Miller4-63/+0
NACK'd by x86 maintainer. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-11bpf: Fix tcp_clamp_kern.c sample programLawrence Brakmo1-11/+13
The program was returning -1 in some cases which is not allowed by the verifier any longer. Fixes: 390ee7e29fc8 ("bpf: enforce return code for cgroup-bpf programs") Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-11bpf: Fix tcp_iw_kern.c sample programLawrence Brakmo1-6/+8
The program was returning -1 in some cases which is not allowed by the verifier any longer. Fixes: 390ee7e29fc8 ("bpf: enforce return code for cgroup-bpf programs") Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-11bpf: Fix tcp_cong_kern.c sample programLawrence Brakmo1-2/+4
The program was returning -1 in some cases which is not allowed by the verifier any longer. Fixes: 390ee7e29fc8 ("bpf: enforce return code for cgroup-bpf programs") Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-11bpf: Fix tcp_bufs_kern.c sample programLawrence Brakmo1-6/+8
The program was returning -1 in some cases which is not allowed by the verifier any longer. Fixes: 390ee7e29fc8 ("bpf: enforce return code for cgroup-bpf programs") Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-11bpf: Fix tcp_rwnd_kern.c sample programLawrence Brakmo1-2/+4
The program was returning -1 in some cases which is not allowed by the verifier any longer. Fixes: 390ee7e29fc8 ("bpf: enforce return code for cgroup-bpf programs") Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-11bpf: Fix tcp_synrto_kern.c sample programLawrence Brakmo1-2/+4
The program was returning -1 in some cases which is not allowed by the verifier any longer. Fixes: 390ee7e29fc8 ("bpf: enforce return code for cgroup-bpf programs") Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-11samples/bpf: add a test for bpf_override_returnJosef Bacik4-0/+63
This adds a basic test for bpf_override_return to verify it works. We override the main function for mounting a btrfs fs so it'll return -ENOMEM and then make sure that trying to mount a btrfs fs will fail. Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Josef Bacik <jbacik@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08bpf: Rename tcp_bbf.readme to tcp_bpf.readmeLawrence Brakmo1-0/+0
The original patch had the wrong filename. Fixes: bfdf75693875 ("bpf: create samples/bpf/tcp_bpf.readme") Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08xdp: Sample xdp program implementing ip forwardChristina Jacob3-0/+849
Implements port to port forwarding with route table and arp table lookup for ipv4 packets using bpf_redirect helper function and lpm_trie map. Signed-off-by: Christina Jacob <Christina.Jacob@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-07Merge branch 'linus' into locking/core, to resolve conflictsIngo Molnar59-1/+59
Conflicts: include/linux/compiler-clang.h include/linux/compiler-gcc.h include/linux/compiler-intel.h include/uapi/linux/stddef.h Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-07Merge branch 'linus' into perf/core, to fix conflictsIngo Molnar59-1/+59
Conflicts: tools/perf/arch/arm/annotate/instructions.c tools/perf/arch/arm64/annotate/instructions.c tools/perf/arch/powerpc/annotate/instructions.c tools/perf/arch/s390/annotate/instructions.c tools/perf/arch/x86/tests/intel-cqm.c tools/perf/ui/tui/progress.c tools/perf/util/zlib.c Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-05bpf: move cgroup_helpers from samples/bpf/ to tools/testing/selftesting/bpf/Roman Gushchin3-197/+3
The purpose of this move is to use these files in bpf tests. Signed-off-by: Roman Gushchin <guro@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Tejun Heo <tj@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller55-0/+55
Files removed in 'net-next' had their license header updated in 'net'. We take the remove from 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02Merge tag 'spdx_identifiers-4.14-rc8' of ↵Linus Torvalds58-0/+58
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull initial SPDX identifiers from Greg KH: "License cleanup: add SPDX license identifiers to some files Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: License cleanup: add SPDX license identifier to uapi header files with a license License cleanup: add SPDX license identifier to uapi header files with no license License cleanup: add SPDX GPL-2.0 license identifier to files with no license
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman58-0/+58
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02samples/pktgen: remove remaining old pktgen sample scriptsJesper Dangaard Brouer3-192/+0
Since commit 0f06a6787e05 ("samples: Add an IPv6 '-6' option to the pktgen scripts") the newer pktgen_sampleXX script does show howto use IPv6 with pktgen. Thus, there is no longer a reason to keep the older sample scripts around. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02samples/pktgen: update sample03, no need for clones when burstingJesper Dangaard Brouer1-1/+1
Like sample05, don't use pktgen clone_skb feature when using 'burst' feature, it is not really needed. This brings the burst users in sync. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02samples/pktgen: add script pktgen_sample06_numa_awared_queue_irq_affinity.shRobert Hoo1-0/+97
This script simply does: * Detect $DEV's NUMA node belonging. * Bind each thread (processor of NUMA locality) with each $DEV queue's irq affinity, 1:1 mapping. * How many '-t' threads input determines how many queues will be utilized. If '-f' designates first cpu id, then offset in the NUMA node's cpu list. (Changes by Jesper: allow changing count from cmdline via '-n') Signed-off-by: Robert Hoo <robert.hu@intel.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02samples/pktgen: Add some helper functionsRobert Hoo1-0/+43
1. given a device, get its NUMA belongings 2. given a device, get its queues' irq numbers. 3. given a NUMA node, get its cpu id list. Signed-off-by: Robert Hoo <robert.hu@intel.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
Several conflicts here. NFP driver bug fix adding nfp_netdev_is_nfp_repr() check to nfp_fl_output() needed some adjustments because the code block is in an else block now. Parallel additions to net/pkt_cls.h and net/sch_generic.h A bug fix in __tcp_retransmit_skb() conflicted with some of the rbtree changes in net-next. The tc action RCU callback fixes in 'net' had some overlap with some of the recent tcf_block reworking. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-29samples/bpf: adjust rlimit RLIMIT_MEMLOCK for xdp_redirect_mapTushar Dave1-0/+7
Default rlimit RLIMIT_MEMLOCK is 64KB, causes bpf map failure. e.g. [root@labbpf]# ./xdp_redirect_map $(</sys/class/net/eth2/ifindex) \ > $(</sys/class/net/eth3/ifindex) failed to create a map: 1 Operation not permitted The failure is 100% when multiple xdp programs are running. Fix it. Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-29samples/bpf: adjust rlimit RLIMIT_MEMLOCK for xdp1Tushar Dave1-0/+8
Default rlimit RLIMIT_MEMLOCK is 64KB, causes bpf map failure. e.g. [root@lab bpf]#./xdp1 -N $(</sys/class/net/eth2/ifindex) failed to create a map: 1 Operation not permitted Fix it. Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-28Fix tracing sample code warning.Linus Torvalds1-1/+1
Commit 6575257c60e1 ("tracing/samples: Fix creation and deletion of simple_thread_fn creation") introduced a new warning due to using a boolean as a counter. Just make it "int". Fixes: 6575257c60e1 ("tracing/samples: Fix creation and deletion of simple_thread_fn creation") Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-27Merge branch 'perf/urgent' into perf/core, to pick up fixesIngo Molnar1-1/+1
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-25locking/atomics, samples/mic/mpssd/mpssd.c: Convert ACCESS_ONCE() to ↵Mark Rutland1-3/+3
READ_ONCE()/WRITE_ONCE() For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't currently harmful. However, for some features it is necessary to instrument reads and writes separately, which is not possible with ACCESS_ONCE(). This distinction is critical to correct operation. The bulk of the kernel code can be transformed via Coccinelle to use {READ,WRITE}_ONCE(), though this only modifies users of ACCESS_ONCE(), and not the implementation itself. As such, it has the potential to break homebrew ACCESS_ONCE() macros seen in some user code in the kernel tree (e.g. the virtio code, as fixed in commit ea9156fb3b71d9f7). To avoid fragility if/when that transformation occurs, and to align with the preferred usage of {READ,WRITE}_ONCE(), this patch updates the MPSSD sample code to use READ_ONCE() rather than ACCESS_ONCE(). There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-10-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-25bpf: add a test case to test single tp multiple bpf attachmentYonghong Song1-13/+53
The bpf sample program syscall_tp is modified to show attachment of more than bpf programs for a particular kernel tracepoint. Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-4/+12
There were quite a few overlapping sets of changes here. Daniel's bug fix for off-by-ones in the new BPF branch instructions, along with the added allowances for "data_end > ptr + x" forms collided with the metadata additions. Along with those three changes came veritifer test cases, which in their final form I tried to group together properly. If I had just trimmed GIT's conflict tags as-is, this would have split up the meta tests unnecessarily. In the socketmap code, a set of preemption disabling changes overlapped with the rename of bpf_compute_data_end() to bpf_compute_data_pointers(). Changes were made to the mv88e6060.c driver set addr method which got removed in net-next. The hyperv transport socket layer had a locking change in 'net' which overlapped with a change of socket state macro usage in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-1/+1
Pull networking fixes from David Miller: "A little more than usual this time around. Been travelling, so that is part of it. Anyways, here are the highlights: 1) Deal with memcontrol races wrt. listener dismantle, from Eric Dumazet. 2) Handle page allocation failures properly in nfp driver, from Jaku Kicinski. 3) Fix memory leaks in macsec, from Sabrina Dubroca. 4) Fix crashes in pppol2tp_session_ioctl(), from Guillaume Nault. 5) Several fixes in bnxt_en driver, including preventing potential NVRAM parameter corruption from Michael Chan. 6) Fix for KRACK attacks in wireless, from Johannes Berg. 7) rtnetlink event generation fixes from Xin Long. 8) Deadlock in mlxsw driver, from Ido Schimmel. 9) Disallow arithmetic operations on context pointers in bpf, from Jakub Kicinski. 10) Missing sock_owned_by_user() check in sctp_icmp_redirect(), from Xin Long. 11) Only TCP is supported for sockmap, make that explicit with a check, from John Fastabend. 12) Fix IP options state races in DCCP and TCP, from Eric Dumazet. 13) Fix panic in packet_getsockopt(), also from Eric Dumazet. 14) Add missing locked in hv_sock layer, from Dexuan Cui. 15) Various aquantia bug fixes, including several statistics handling cures. From Igor Russkikh et al. 16) Fix arithmetic overflow in devmap code, from John Fastabend. 17) Fix busted socket memory accounting when we get a fault in the tcp zero copy paths. From Willem de Bruijn. 18) Don't leave opt->tot_len uninitialized in ipv6, from Eric Dumazet" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (106 commits) stmmac: Don't access tx_q->dirty_tx before netif_tx_lock ipv6: flowlabel: do not leave opt->tot_len with garbage of_mdio: Fix broken PHY IRQ in case of probe deferral textsearch: fix typos in library helpers rxrpc: Don't release call mutex on error pointer net: stmmac: Prevent infinite loop in get_rx_timestamp_status() net: stmmac: Fix stmmac_get_rx_hwtstamp() net: stmmac: Add missing call to dev_kfree_skb() mlxsw: spectrum_router: Configure TIGCR on init mlxsw: reg: Add Tunneling IPinIP General Configuration Register net: ethtool: remove error check for legacy setting transceiver type soreuseport: fix initialization race net: bridge: fix returning of vlan range op errors sock: correct sk_wmem_queued accounting on efault in tcp zerocopy bpf: add test cases to bpf selftests to cover all access tests bpf: fix pattern matches for direct packet access bpf: fix off by one for range markings with L{T, E} patterns bpf: devmap fix arithmetic overflow in bitmap_size calculation net: aquantia: Bad udp rate on default interrupt coalescing net: aquantia: Enable coalescing management via ethtool interface ...
2017-10-22bpf: create samples/bpf/tcp_bpf.readmeLawrence Brakmo1-0/+26
Readme file explaining how to create a cgroupv2 and attach one of the tcp_*_kern.o socket_ops BPF program. Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked_by: Alexei Starovoitov <ast@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22bpf: sample BPF_SOCKET_OPS_BASE_RTT programLawrence Brakmo2-0/+79
Sample socket_ops BPF program to test the BPF helper function bpf_getsocketops and the new socket_ops op BPF_SOCKET_OPS_BASE_RTT. The program provides a base RTT of 80us when the calling flow is within a DC (as determined by the IPV6 prefix) and the congestion algorithm is "nv". Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked_by: Alexei Starovoitov <ast@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20bpf: avoid preempt enable/disable in sockmap using tcp_skb_cb regionJohn Fastabend1-1/+1
SK_SKB BPF programs are run from the socket/tcp context but early in the stack before much of the TCP metadata is needed in tcp_skb_cb. So we can use some unused fields to place BPF metadata needed for SK_SKB programs when implementing the redirect function. This allows us to drop the preempt disable logic. It does however require an API change so sk_redirect_map() has been updated to additionally provide ctx_ptr to skb. Note, we do however continue to disable/enable preemption around actual BPF program running to account for map updates. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20kprobes: Remove the jprobes sample codeMasami Hiramatsu2-68/+1
Remove the jprobes sample module because jprobes are deprecated. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Ian McDonald <ian.mcdonald@jandi.co.nz> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E . McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlad Yasevich <vyasevich@gmail.com> Link: http://lkml.kernel.org/r/150724535709.5014.7261513316230565780.stgit@devbox Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-19samples: Convert timers to use timer_setup()Kees Cook1-3/+3
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-10-19configfs: make config_item_type constBhumika Goyal1-4/+4
Make config_item_type structures const as they are either passed to a function having the argument as const or stored in the const "ci_type" field of a config_item structure. Done using Coccinelle. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>