summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2017-04-28Merge tag 'ipvs-fixes-for-v4.11' of ↵Pablo Neira Ayuso1-5/+17
http://git.kernel.org/pub/scm/linux/kernel/git/horms/ipvs Simon Horman says: ==================== IPVS Fixes for v4.11 I would also like it considered for stable. * Explicitly forbid ipv6 service/dest creation if ipv6 mod is disabled to avoid oops caused by IPVS accesing IPv6 routing code in such circumstances. ==================== Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-04-28netfilter: x_tables: unlock on error in xt_find_table_lock()Dan Carpenter1-1/+3
According to my static checker we should unlock here before the return. That seems reasonable to me as well. Fixes" b9e69e127397 ("netfilter: xtables: don't hook tables by default") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-04-28ipvs: explicitly forbid ipv6 service/dest creation if ipv6 mod is disabledPaolo Abeni1-5/+17
When creating a new ipvs service, ipv6 addresses are always accepted if CONFIG_IP_VS_IPV6 is enabled. On dest creation the address family is not explicitly checked. This allows the user-space to configure ipvs services even if the system is booted with ipv6.disable=1. On specific configuration, ipvs can try to call ipv6 routing code at setup time, causing the kernel to oops due to fib6_rules_ops being NULL. This change addresses the issue adding a check for the ipv6 module being enabled while validating ipv6 service operations and adding the same validation for dest operations. According to git history, this issue is apparently present since the introduction of ipv6 support, and the oops can be triggered since commit 09571c7ae30865ad ("IPVS: Add function to determine if IPv6 address is local") Fixes: 09571c7ae30865ad ("IPVS: Add function to determine if IPv6 address is local") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au>
2017-04-25netfilter: Wrong icmp6 checksum for ICMPV6_TIME_EXCEED in reverse SNATv6 pathDave Johnson1-1/+1
When recalculating the outer ICMPv6 checksum for a reverse path NATv6 such as ICMPV6_TIME_EXCEED nf_nat_icmpv6_reply_translation() was accessing data beyond the headlen of the skb for non-linear skb. This resulted in incorrect ICMPv6 checksum as garbage data was used. Patch replaces csum_partial() with skb_checksum() which supports non-linear skbs similar to nf_nat_icmp_reply_translation() from ipv4. Signed-off-by: Dave Johnson <dave-kernel@centerclick.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-04-25netfilter: nft_dynset: continue to next expr if _OP_ADD succeededLiping Zhang1-3/+2
Currently, after adding the following nft rules: # nft add set x target1 { type ipv4_addr \; flags timeout \;} # nft add rule x y set add ip daddr timeout 1d @target1 counter the counters will always be zero despite of the elements are added to the dynamic set "target1" or not, as we will break the nft expr traversal unconditionally: # nft list ruleset ... set target1 { ... elements = { 8.8.8.8 expires 23h59m53s} } chain output { ... set add ip daddr timeout 1d @target1 counter packets 0 bytes 0 ^ ^ ... } Since we add the elements to the set successfully, we should continue to the next expression. Additionally, if elements are added to "flow table" successfully, we will _always_ continue to the next expr, even if the operation is _OP_ADD. So it's better to keep them to be consistent. Fixes: 22fe54d5fefc ("netfilter: nf_tables: add support for dynamic set updates") Reported-by: Robert White <rwhite@pobox.com> Signed-off-by: Liping Zhang <zlpnobody@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-04-25bridge: ebtables: fix reception of frames DNAT-ed to bridge device/portLinus Lüssing1-0/+20
When trying to redirect bridged frames to the bridge device itself or a bridge port (brouting) via the dnat target then this currently fails: The ethernet destination of the frame is dnat'ed to the MAC address of the bridge device or port just fine. However, the IP code drops it in the beginning of ip_input.c/ip_rcv() as the dnat target left the skb->pkt_type as PACKET_OTHERHOST. Fixing this by resetting skb->pkt_type to an appropriate type after dnat'ing. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-04-24netfilter: xt_socket: Fix broken IPv6 handlingPeter Tirsek1-1/+1
Commit 834184b1f3a4 ("netfilter: defrag: only register defrag functionality if needed") used the outdated XT_SOCKET_HAVE_IPV6 macro which was removed earlier in commit 8db4c5be88f6 ("netfilter: move socket lookup infrastructure to nf_socket_ipv{4,6}.c"). With that macro never being defined, the xt_socket match emits an "Unknown family 10" warning when used with IPv6: WARNING: CPU: 0 PID: 1377 at net/netfilter/xt_socket.c:160 socket_mt_enable_defrag+0x47/0x50 [xt_socket] Unknown family 10 Modules linked in: xt_socket nf_socket_ipv4 nf_socket_ipv6 nf_defrag_ipv4 [...] CPU: 0 PID: 1377 Comm: ip6tables-resto Not tainted 4.10.10 #1 Hardware name: [...] Call Trace: ? __warn+0xe7/0x100 ? socket_mt_enable_defrag+0x47/0x50 [xt_socket] ? socket_mt_enable_defrag+0x47/0x50 [xt_socket] ? warn_slowpath_fmt+0x39/0x40 ? socket_mt_enable_defrag+0x47/0x50 [xt_socket] ? socket_mt_v2_check+0x12/0x40 [xt_socket] ? xt_check_match+0x6b/0x1a0 [x_tables] ? xt_find_match+0x93/0xd0 [x_tables] ? xt_request_find_match+0x20/0x80 [x_tables] ? translate_table+0x48e/0x870 [ip6_tables] ? translate_table+0x577/0x870 [ip6_tables] ? walk_component+0x3a/0x200 ? kmalloc_order+0x1d/0x50 ? do_ip6t_set_ctl+0x181/0x490 [ip6_tables] ? filename_lookup+0xa5/0x120 ? nf_setsockopt+0x3a/0x60 ? ipv6_setsockopt+0xb0/0xc0 ? sock_common_setsockopt+0x23/0x30 ? SyS_socketcall+0x41d/0x630 ? vfs_read+0xfa/0x120 ? do_fast_syscall_32+0x7a/0x110 ? entry_SYSENTER_32+0x47/0x71 This patch brings the conditional back in line with how the rest of the file handles IPv6. Fixes: 834184b1f3a4 ("netfilter: defrag: only register defrag functionality if needed") Signed-off-by: Peter Tirsek <peter@tirsek.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-04-24netfilter: ctnetlink: acquire ct->lock before operating nf_ct_seqadjLiping Zhang1-6/+15
We should acquire the ct->lock before accessing or modifying the nf_ct_seqadj, as another CPU may modify the nf_ct_seqadj at the same time during its packet proccessing. Signed-off-by: Liping Zhang <zlpnobody@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-04-24netfilter: ctnetlink: make it safer when updating ct->statusLiping Zhang1-9/+24
After converting to use rcu for conntrack hash, one CPU may update the ct->status via ctnetlink, while another CPU may process the packets and update the ct->status. So the non-atomic operation "ct->status |= status;" via ctnetlink becomes unsafe, and this may clear the IPS_DYING_BIT bit set by another CPU unexpectedly. For example: CPU0 CPU1 ctnetlink_change_status __nf_conntrack_find_get old = ct->status nf_ct_gc_expired - nf_ct_kill - test_and_set_bit(IPS_DYING_BIT new = old | status; - ct->status = new; <-- oops, _DYING_ is cleared! Now using a series of atomic bit operation to solve the above issue. Also note, user shouldn't set IPS_TEMPLATE, IPS_SEQ_ADJUST directly, so make these two bits be unchangable too. If we set the IPS_TEMPLATE_BIT, ct will be freed by nf_ct_tmpl_free, but actually it is alloced by nf_conntrack_alloc. If we set the IPS_SEQ_ADJUST_BIT, this may cause the NULL pointer deference, as the nfct_seqadj(ct) maybe NULL. Last, add some comments to describe the logic change due to the commit a963d710f367 ("netfilter: ctnetlink: Fix regression in CTA_STATUS processing"), which makes me feel a little confusing. Fixes: 76507f69c44e ("[NETFILTER]: nf_conntrack: use RCU for conntrack hash") Signed-off-by: Liping Zhang <zlpnobody@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-04-24netfilter: ctnetlink: fix deadlock due to acquire _expect_lock twiceLiping Zhang1-12/+12
Currently, ctnetlink_change_conntrack is always protected by _expect_lock, but this will cause a deadlock when deleting the helper from a conntrack, as the _expect_lock will be acquired again by nf_ct_remove_expectations: CPU0 ---- lock(nf_conntrack_expect_lock); lock(nf_conntrack_expect_lock); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by lt-conntrack_gr/12853: #0: (&table[i].mutex){+.+.+.}, at: [<ffffffffa05e2009>] nfnetlink_rcv_msg+0x399/0x6a9 [nfnetlink] #1: (nf_conntrack_expect_lock){+.....}, at: [<ffffffffa05f2c1f>] ctnetlink_new_conntrack+0x17f/0x408 [nf_conntrack_netlink] Call Trace: dump_stack+0x85/0xc2 __lock_acquire+0x1608/0x1680 ? ctnetlink_parse_tuple_proto+0x10f/0x1c0 [nf_conntrack_netlink] lock_acquire+0x100/0x1f0 ? nf_ct_remove_expectations+0x32/0x90 [nf_conntrack] _raw_spin_lock_bh+0x3f/0x50 ? nf_ct_remove_expectations+0x32/0x90 [nf_conntrack] nf_ct_remove_expectations+0x32/0x90 [nf_conntrack] ctnetlink_change_helper+0xc6/0x190 [nf_conntrack_netlink] ctnetlink_new_conntrack+0x1b2/0x408 [nf_conntrack_netlink] nfnetlink_rcv_msg+0x60a/0x6a9 [nfnetlink] ? nfnetlink_rcv_msg+0x1b9/0x6a9 [nfnetlink] ? nfnetlink_bind+0x1a0/0x1a0 [nfnetlink] netlink_rcv_skb+0xa4/0xc0 nfnetlink_rcv+0x87/0x770 [nfnetlink] Since the operations are unrelated to nf_ct_expect, so we can drop the _expect_lock. Also note, after removing the _expect_lock protection, another CPU may invoke nf_conntrack_helper_unregister, so we should use rcu_read_lock to protect __nf_conntrack_helper_find invoked by ctnetlink_change_helper. Fixes: ca7433df3a67 ("netfilter: conntrack: seperate expect locking from nf_conntrack_lock") Signed-off-by: Liping Zhang <zlpnobody@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-04-24netfilter: ctnetlink: drop the incorrect cthelper module requestLiping Zhang1-16/+1
First, when creating a new ct, we will invoke request_module to try to load the related inkernel cthelper. So there's no need to call the request_module again when updating the ct helpinfo. Second, ctnetlink_change_helper may be called with rcu_read_lock held, i.e. rcu_read_lock -> nfqnl_recv_verdict -> nfqnl_ct_parse -> ctnetlink_glue_parse -> ctnetlink_glue_parse_ct -> ctnetlink_change_helper. But the request_module invocation may sleep, so we can't call it with the rcu_read_lock held. Remove it now. Signed-off-by: Liping Zhang <zlpnobody@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-04-24netfilter: nft_set_bitmap: free dummy elements when destroy the setLiping Zhang1-0/+5
We forget to free dummy elements when deleting the set. So when I was running nft-test.py, I saw many kmemleak warnings: kmemleak: 1344 new suspected memory leaks ... # cat /sys/kernel/debug/kmemleak unreferenced object 0xffff8800631345c8 (size 32): comm "nft", pid 9075, jiffies 4295743309 (age 1354.815s) hex dump (first 32 bytes): f8 63 13 63 00 88 ff ff 88 79 13 63 00 88 ff ff .c.c.....y.c.... 04 0c 00 00 00 00 00 00 00 00 00 00 08 03 00 00 ................ backtrace: [<ffffffff819059da>] kmemleak_alloc+0x4a/0xa0 [<ffffffff81288174>] __kmalloc+0x164/0x310 [<ffffffffa061269d>] nft_set_elem_init+0x3d/0x1b0 [nf_tables] [<ffffffffa06130da>] nft_add_set_elem+0x45a/0x8c0 [nf_tables] [<ffffffffa0613645>] nf_tables_newsetelem+0x105/0x1d0 [nf_tables] [<ffffffffa05fe6d4>] nfnetlink_rcv+0x414/0x770 [nfnetlink] [<ffffffff817f0ca6>] netlink_unicast+0x1f6/0x310 [<ffffffff817f10c6>] netlink_sendmsg+0x306/0x3b0 ... Fixes: e920dde516088 ("netfilter: nft_set_bitmap: keep a list of dummy elements") Signed-off-by: Liping Zhang <zlpnobody@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-04-24netfilter: nf_ct_helper: permit cthelpers with different names via nfnetlinkLiping Zhang1-5/+21
cthelpers added via nfnetlink may have the same tuple, i.e. except for the l3proto and l4proto, other fields are all zero. So even with the different names, we will also fail to add them: # nfct helper add ssdp inet udp # nfct helper add tftp inet udp nfct v1.4.3: netlink error: File exists So in order to avoid unpredictable behaviour, we should: 1. cthelpers can be selected by nft ct helper obj or xt_CT target, so report error if duplicated { name, l3proto, l4proto } tuple exist. 2. cthelpers can be selected by nf_ct_tuple_src_mask_cmp when nf_ct_auto_assign_helper is enabled, so also report error if duplicated { l3proto, l4proto, src-port } tuple exist. Also note, if the cthelper is added from userspace, then the src-port will always be zero, it's invalid for nf_ct_auto_assign_helper, so there's no need to check the second point listed above. Fixes: 893e093c786c ("netfilter: nf_ct_helper: bail out on duplicated helpers") Signed-off-by: Liping Zhang <zlpnobody@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-04-24openvswitch: Delete conntrack entry clashing with an expectation.Jarno Rajahalme1-1/+29
Conntrack helpers do not check for a potentially clashing conntrack entry when creating a new expectation. Also, nf_conntrack_in() will check expectations (via init_conntrack()) only if a conntrack entry can not be found. The expectation for a packet which also matches an existing conntrack entry will not be removed by conntrack, and is currently handled inconsistently by OVS, as OVS expects the expectation to be removed when the connection tracking entry matching that expectation is confirmed. It should be noted that normally an IP stack would not allow reuse of a 5-tuple of an old (possibly lingering) connection for a new data connection, so this is somewhat unlikely corner case. However, it is possible that a misbehaving source could cause conntrack entries be created that could then interfere with new related connections. Fix this in the OVS module by deleting the clashing conntrack entry after an expectation has been matched. This causes the following nf_conntrack_in() call also find the expectation and remove it when creating the new conntrack entry, as well as the forthcoming reply direction packets to match the new related connection instead of the old clashing conntrack entry. Fixes: 7f8a436eaa2c ("openvswitch: Add conntrack action") Reported-by: Yang Song <yangsong@vmware.com> Signed-off-by: Jarno Rajahalme <jarno@ovn.org> Acked-by: Joe Stringer <joe@ovn.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-04-24netfilter: xt_CT: fix refcnt leak on error pathGao Feng1-2/+9
There are two cases which causes refcnt leak. 1. When nf_ct_timeout_ext_add failed in xt_ct_set_timeout, it should free the timeout refcnt. Now goto the err_put_timeout error handler instead of going ahead. 2. When the time policy is not found, we should call module_put. Otherwise, the related cthelper module cannot be removed anymore. It is easy to reproduce by typing the following command: # iptables -t raw -A OUTPUT -p tcp -j CT --helper ftp --timeout xxx Signed-off-by: Gao Feng <fgao@ikuai8.com> Signed-off-by: Liping Zhang <zlpnobody@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-04-21netpoll: Check for skb->queue_mappingTushar Dave1-2/+8
Reducing real_num_tx_queues needs to be in sync with skb queue_mapping otherwise skbs with queue_mapping greater than real_num_tx_queues can be sent to the underlying driver and can result in kernel panic. One such event is running netconsole and enabling VF on the same device. Or running netconsole and changing number of tx queues via ethtool on same device. e.g. Unable to handle kernel NULL pointer dereference tsk->{mm,active_mm}->context = 0000000000001525 tsk->{mm,active_mm}->pgd = fff800130ff9a000 \|/ ____ \|/ "@'/ .. \`@" /_| \__/ |_\ \__U_/ kworker/48:1(475): Oops [#1] CPU: 48 PID: 475 Comm: kworker/48:1 Tainted: G OE 4.11.0-rc3-davem-net+ #7 Workqueue: events queue_process task: fff80013113299c0 task.stack: fff800131132c000 TSTATE: 0000004480e01600 TPC: 00000000103f9e3c TNPC: 00000000103f9e40 Y: 00000000 Tainted: G OE TPC: <ixgbe_xmit_frame_ring+0x7c/0x6c0 [ixgbe]> g0: 0000000000000000 g1: 0000000000003fff g2: 0000000000000000 g3: 0000000000000001 g4: fff80013113299c0 g5: fff8001fa6808000 g6: fff800131132c000 g7: 00000000000000c0 o0: fff8001fa760c460 o1: fff8001311329a50 o2: fff8001fa7607504 o3: 0000000000000003 o4: fff8001f96e63a40 o5: fff8001311d77ec0 sp: fff800131132f0e1 ret_pc: 000000000049ed94 RPC: <set_next_entity+0x34/0xb80> l0: 0000000000000000 l1: 0000000000000800 l2: 0000000000000000 l3: 0000000000000000 l4: 000b2aa30e34b10d l5: 0000000000000000 l6: 0000000000000000 l7: fff8001fa7605028 i0: fff80013111a8a00 i1: fff80013155a0780 i2: 0000000000000000 i3: 0000000000000000 i4: 0000000000000000 i5: 0000000000100000 i6: fff800131132f1a1 i7: 00000000103fa4b0 I7: <ixgbe_xmit_frame+0x30/0xa0 [ixgbe]> Call Trace: [00000000103fa4b0] ixgbe_xmit_frame+0x30/0xa0 [ixgbe] [0000000000998c74] netpoll_start_xmit+0xf4/0x200 [0000000000998e10] queue_process+0x90/0x160 [0000000000485fa8] process_one_work+0x188/0x480 [0000000000486410] worker_thread+0x170/0x4c0 [000000000048c6b8] kthread+0xd8/0x120 [0000000000406064] ret_from_fork+0x1c/0x2c [0000000000000000] (null) Disabling lock debugging due to kernel taint Caller[00000000103fa4b0]: ixgbe_xmit_frame+0x30/0xa0 [ixgbe] Caller[0000000000998c74]: netpoll_start_xmit+0xf4/0x200 Caller[0000000000998e10]: queue_process+0x90/0x160 Caller[0000000000485fa8]: process_one_work+0x188/0x480 Caller[0000000000486410]: worker_thread+0x170/0x4c0 Caller[000000000048c6b8]: kthread+0xd8/0x120 Caller[0000000000406064]: ret_from_fork+0x1c/0x2c Caller[0000000000000000]: (null) Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21ip6mr: fix notification device destructionNikolay Aleksandrov1-7/+6
Andrey Konovalov reported a BUG caused by the ip6mr code which is caused because we call unregister_netdevice_many for a device that is already being destroyed. In IPv4's ipmr that has been resolved by two commits long time ago by introducing the "notify" parameter to the delete function and avoiding the unregister when called from a notifier, so let's do the same for ip6mr. The trace from Andrey: ------------[ cut here ]------------ kernel BUG at net/core/dev.c:6813! invalid opcode: 0000 [#1] SMP KASAN Modules linked in: CPU: 1 PID: 1165 Comm: kworker/u4:3 Not tainted 4.11.0-rc7+ #251 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: netns cleanup_net task: ffff880069208000 task.stack: ffff8800692d8000 RIP: 0010:rollback_registered_many+0x348/0xeb0 net/core/dev.c:6813 RSP: 0018:ffff8800692de7f0 EFLAGS: 00010297 RAX: ffff880069208000 RBX: 0000000000000002 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88006af90569 RBP: ffff8800692de9f0 R08: ffff8800692dec60 R09: 0000000000000000 R10: 0000000000000006 R11: 0000000000000000 R12: ffff88006af90070 R13: ffff8800692debf0 R14: dffffc0000000000 R15: ffff88006af90000 FS: 0000000000000000(0000) GS:ffff88006cb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe7e897d870 CR3: 00000000657e7000 CR4: 00000000000006e0 Call Trace: unregister_netdevice_many.part.105+0x87/0x440 net/core/dev.c:7881 unregister_netdevice_many+0xc8/0x120 net/core/dev.c:7880 ip6mr_device_event+0x362/0x3f0 net/ipv6/ip6mr.c:1346 notifier_call_chain+0x145/0x2f0 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x51/0x90 net/core/dev.c:1647 call_netdevice_notifiers net/core/dev.c:1663 rollback_registered_many+0x919/0xeb0 net/core/dev.c:6841 unregister_netdevice_many.part.105+0x87/0x440 net/core/dev.c:7881 unregister_netdevice_many net/core/dev.c:7880 default_device_exit_batch+0x4fa/0x640 net/core/dev.c:8333 ops_exit_list.isra.4+0x100/0x150 net/core/net_namespace.c:144 cleanup_net+0x5a8/0xb40 net/core/net_namespace.c:463 process_one_work+0xc04/0x1c10 kernel/workqueue.c:2097 worker_thread+0x223/0x19c0 kernel/workqueue.c:2231 kthread+0x35e/0x430 kernel/kthread.c:231 ret_from_fork+0x31/0x40 arch/x86/entry/entry_64.S:430 Code: 3c 32 00 0f 85 70 0b 00 00 48 b8 00 02 00 00 00 00 ad de 49 89 47 78 e9 93 fe ff ff 49 8d 57 70 49 8d 5f 78 eb 9e e8 88 7a 14 fe <0f> 0b 48 8b 9d 28 fe ff ff e8 7a 7a 14 fe 48 b8 00 00 00 00 00 RIP: rollback_registered_many+0x348/0xeb0 RSP: ffff8800692de7f0 ---[ end trace e0b29c57e9b3292c ]--- Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21net: qrtr: potential use after free in qrtr_sendmsg()Dan Carpenter1-1/+3
If skb_pad() fails then it frees the skb so we should check for errors. Fixes: bdabad3e363d ("net: Add Qualcomm IPC router") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21net: ipv6: RTF_PCPU should not be settable from userspaceDavid Ahern1-0/+4
Andrey reported a fault in the IPv6 route code: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Modules linked in: CPU: 1 PID: 4035 Comm: a.out Not tainted 4.11.0-rc7+ #250 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff880069809600 task.stack: ffff880062dc8000 RIP: 0010:ip6_rt_cache_alloc+0xa6/0x560 net/ipv6/route.c:975 RSP: 0018:ffff880062dced30 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: ffff8800670561c0 RCX: 0000000000000006 RDX: 0000000000000003 RSI: ffff880062dcfb28 RDI: 0000000000000018 RBP: ffff880062dced68 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff880062dcfb28 R14: dffffc0000000000 R15: 0000000000000000 FS: 00007feebe37e7c0(0000) GS:ffff88006cb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000205a0fe4 CR3: 000000006b5c9000 CR4: 00000000000006e0 Call Trace: ip6_pol_route+0x1512/0x1f20 net/ipv6/route.c:1128 ip6_pol_route_output+0x4c/0x60 net/ipv6/route.c:1212 ... Andrey's syzkaller program passes rtmsg.rtmsg_flags with the RTF_PCPU bit set. Flags passed to the kernel are blindly copied to the allocated rt6_info by ip6_route_info_create making a newly inserted route appear as though it is a per-cpu route. ip6_rt_cache_alloc sees the flag set and expects rt->dst.from to be set - which it is not since it is not really a per-cpu copy. The subsequent call to __ip6_dst_alloc then generates the fault. Fix by checking for the flag and failing with EINVAL. Fixes: d52d3997f843f ("ipv6: Create percpu rt6_info") Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21gso: Validate assumption of frag_list segementationIlan Tayari1-4/+14
Commit 07b26c9454a2 ("gso: Support partial splitting at the frag_list pointer") assumes that all SKBs in a frag_list (except maybe the last one) contain the same amount of GSO payload. This assumption is not always correct, resulting in the following warning message in the log: skb_segment: too many frags For example, mlx5 driver in Striding RQ mode creates some RX SKBs with one frag, and some with 2 frags. After GRO, the frag_list SKBs end up having different amounts of payload. If this frag_list SKB is then forwarded, the aforementioned assumption is violated. Validate the assumption, and fall back to software GSO if it not true. Change-Id: Ia03983f4a47b6534dd987d7a2aad96d54d46d212 Fixes: 07b26c9454a2 ("gso: Support partial splitting at the frag_list pointer") Signed-off-by: Ilan Tayari <ilant@mellanox.com> Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21ipv6: sr: fix double free of skb after handling invalid SRHDavid Lebrun1-1/+0
The icmpv6_param_prob() function already does a kfree_skb(), this patch removes the duplicate one. Fixes: 1ababeba4a21f3dba3da3523c670b207fb2feb62 ("ipv6: implement dataplane support for rthdr type 4 (Segment Routing Header)") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David Lebrun <david.lebrun@uclouvain.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20net sched actions: allocate act cookie earlyWolfgang Bumiller1-23/+32
Policing filters do not use the TCA_ACT_* enum and the tb[] nlattr array in tcf_action_init_1() doesn't get filled for them so we should not try to look for a TCA_ACT_COOKIE attribute in the then uninitialized array. The error handling in cookie allocation then calls tcf_hash_release() leading to invalid memory access later on. Additionally, if cookie allocation fails after an already existing non-policing filter has successfully been changed, tcf_action_release() should not be called, also we would have to roll back the changes in the error handling, so instead we now allocate the cookie early and assign it on success at the end. CVE-2017-7979 Fixes: 1045ba77a596 ("net sched actions: Add support for user cookies") Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20Merge branch 'master' of ↵David S. Miller1-29/+64
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2017-04-19 Two fixes for af_key: 1) Add a lock to key dump to prevent a NULL pointer dereference. From Yuejie Shi. 2) Fix slab-out-of-bounds in parse_ipsecrequests. From Herbert Xu. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20ipv6: sr: fix out-of-bounds access in SRH validationDavid Lebrun1-0/+3
This patch fixes an out-of-bounds access in seg6_validate_srh() when the trailing data is less than sizeof(struct sr6_tlv). Reported-by: Andrey Konovalov <andreyknvl@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David Lebrun <david.lebrun@uclouvain.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20mac80211: reject ToDS broadcast data framesJohannes Berg1-0/+21
AP/AP_VLAN modes don't accept any real 802.11 multicast data frames, but since they do need to accept broadcast management frames the same is currently permitted for data frames. This opens a security problem because such frames would be decrypted with the GTK, and could even contain unicast L3 frames. Since the spec says that ToDS frames must always have the BSSID as the RA (addr1), reject any other data frames. The problem was originally reported in "Predicting, Decrypting, and Abusing WPA2/802.11 Group Keys" at usenix https://www.usenix.org/conference/usenixsecurity16/technical-sessions/presentation/vanhoef and brought to my attention by Jouni. Cc: stable@vger.kernel.org Reported-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com> -- Dave, I didn't want to send you a new pull request for a single commit yet again - can you apply this one patch as is? Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-20Merge tag 'mac80211-for-davem-2017-04-18' of ↵David S. Miller1-18/+47
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== A single fix, for the MU-MIMO monitor mode, that fixes bad SKB accesses if the SKB was paged, which is the case for the only driver supporting this - iwlwifi. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18af_key: Fix sadb_x_ipsecrequest parsingHerbert Xu1-21/+26
The parsing of sadb_x_ipsecrequest is broken in a number of ways. First of all we're not verifying sadb_x_ipsecrequest_len. This is needed when the structure carries addresses at the end. Worse we don't even look at the length when we parse those optional addresses. The migration code had similar parsing code that's better but it also has some deficiencies. The length is overcounted first of all as it includes the header itself. It also fails to check the length before dereferencing the sa_family field. This patch fixes those problems in parse_sockaddr_pair and then uses it in parse_ipsecrequest. Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-04-17ipv6: drop non loopback packets claiming to originate from ::1Florian Westphal1-2/+5
We lack a saddr check for ::1. This causes security issues e.g. with acls permitting connections from ::1 because of assumption that these originate from local machine. Assuming a source address of ::1 is local seems reasonable. RFC4291 doesn't allow such a source address either, so drop such packets. Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17net-timestamp: avoid use-after-free in ip_recv_errorWillem de Bruijn3-14/+6
Syzkaller reported a use-after-free in ip_recv_error at line info->ipi_ifindex = skb->dev->ifindex; This function is called on dequeue from the error queue, at which point the device pointer may no longer be valid. Save ifindex on enqueue in __skb_complete_tx_timestamp, when the pointer is valid or NULL. Store it in temporary storage skb->cb. It is safe to reference skb->dev here, as called from device drivers or dev_queue_xmit. The exception is when called from tcp_ack_tstamp; in that case it is NULL and ifindex is set to 0 (invalid). Do not return a pktinfo cmsg if ifindex is 0. This maintains the current behavior of not returning a cmsg if skb->dev was NULL. On dequeue, the ipv4 path will cast from sock_exterr_skb to in_pktinfo. Both have ifindex as their first element, so no explicit conversion is needed. This is by design, introduced in commit 0b922b7a829c ("net: original ingress device index in PKTINFO"). For ipv6 ip6_datagram_support_cmsg converts to in6_pktinfo. Fixes: 829ae9d61165 ("net-timestamp: allow reading recv cmsg on errqueue with origin tstamp") Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17ipv4: fix a deadlock in ip_ra_controlWANG Cong3-9/+5
Similar to commit 87e9f0315952 ("ipv4: fix a potential deadlock in mcast getsockopt() path"), there is a deadlock scenario for IP_ROUTER_ALERT too: CPU0 CPU1 ---- ---- lock(rtnl_mutex); lock(sk_lock-AF_INET); lock(rtnl_mutex); lock(sk_lock-AF_INET); Fix this by always locking RTNL first on all setsockopt() paths. Note, after this patch ip_ra_lock is no longer needed either. Reported-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller8-25/+62
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for your net tree, they are: 1) Missing TCP header sanity check in TCPMSS target, from Eric Dumazet. 2) Incorrect event message type for related conntracks created via ctnetlink, from Liping Zhang. 3) Fix incorrect rcu locking when handling helpers from ctnetlink, from Gao feng. 4) Fix missing rcu locking when updating helper, from Liping Zhang. 5) Fix missing read_lock_bh when iterating over list of device addresses from TPROXY and redirect, also from Liping. 6) Fix crash when trying to dump expectations from conntrack with no helper via ctnetlink, from Liping. 7) Missing RCU protection to expecation list update given ctnetlink iterates over the list under rcu read lock side, from Liping too. 8) Don't dump autogenerated seed in nft_hash to userspace, this is very confusing to the user, again from Liping. 9) Fix wrong conntrack netns module refcount in ipt_CLUSTERIP, from Gao feng. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-14netfilter: ipt_CLUSTERIP: Fix wrong conntrack netns refcnt usageGao Feng1-1/+1
Current codes invoke wrongly nf_ct_netns_get in the destroy routine, it should use nf_ct_netns_put, not nf_ct_netns_get. It could cause some modules could not be unloaded. Fixes: ecb2421b5ddf ("netfilter: add and use nf_ct_netns_get/put") Signed-off-by: Gao Feng <fgao@ikuai8.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-04-14netfilter: nft_hash: do not dump the auto generated seedLiping Zhang1-3/+7
This can prevent the nft utility from printing out the auto generated seed to the user, which is unnecessary and confusing. Fixes: cb1b69b0b15b ("netfilter: nf_tables: add hash expression") Signed-off-by: Liping Zhang <zlpnobody@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-04-13mac80211: fix MU-MIMO follow-MAC modeJohannes Berg1-18/+47
There are two bugs in the follow-MAC code: * it treats the radiotap header as the 802.11 header (therefore it can't possibly work) * it doesn't verify that the skb data it accesses is actually present in the header, which is mitigated by the first point Fix this by moving all of this out into a separate function. This function copies the data it needs using skb_copy_bits() to make sure it can be accessed if it's paged, and offsets that by the possibly present vendor radiotap header. This also makes all those conditions more readable. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-12ipv6: Fix idev->addr_list corruptionRabin Vincent1-4/+7
addrconf_ifdown() removes elements from the idev->addr_list without holding the idev->lock. If this happens while the loop in __ipv6_dev_get_saddr() is handling the same element, that function ends up in an infinite loop: NMI watchdog: BUG: soft lockup - CPU#1 stuck for 23s! [test:1719] Call Trace: ipv6_get_saddr_eval+0x13c/0x3a0 __ipv6_dev_get_saddr+0xe4/0x1f0 ipv6_dev_get_saddr+0x1b4/0x204 ip6_dst_lookup_tail+0xcc/0x27c ip6_dst_lookup_flow+0x38/0x80 udpv6_sendmsg+0x708/0xba8 sock_sendmsg+0x18/0x30 SyS_sendto+0xb8/0xf8 syscall_common+0x34/0x58 Fixes: 6a923934c33 (Revert "ipv6: Revert optional address flusing on ifdown.") Signed-off-by: Rabin Vincent <rabinv@axis.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-12net: xdp: don't export dev_change_xdp_fd()Johannes Berg1-1/+0
Since dev_change_xdp_fd() is only used in rtnetlink, which must be built-in, there's no reason to export dev_change_xdp_fd(). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-12bridge: netlink: register netdevice before executing changelinkIdo Schimmel1-2/+5
Peter reported a kernel oops when executing the following command: $ ip link add name test type bridge vlan_default_pvid 1 [13634.939408] BUG: unable to handle kernel NULL pointer dereference at 0000000000000190 [13634.939436] IP: __vlan_add+0x73/0x5f0 [...] [13634.939783] Call Trace: [13634.939791] ? pcpu_next_unpop+0x3b/0x50 [13634.939801] ? pcpu_alloc+0x3d2/0x680 [13634.939810] ? br_vlan_add+0x135/0x1b0 [13634.939820] ? __br_vlan_set_default_pvid.part.28+0x204/0x2b0 [13634.939834] ? br_changelink+0x120/0x4e0 [13634.939844] ? br_dev_newlink+0x50/0x70 [13634.939854] ? rtnl_newlink+0x5f5/0x8a0 [13634.939864] ? rtnl_newlink+0x176/0x8a0 [13634.939874] ? mem_cgroup_commit_charge+0x7c/0x4e0 [13634.939886] ? rtnetlink_rcv_msg+0xe1/0x220 [13634.939896] ? lookup_fast+0x52/0x370 [13634.939905] ? rtnl_newlink+0x8a0/0x8a0 [13634.939915] ? netlink_rcv_skb+0xa1/0xc0 [13634.939925] ? rtnetlink_rcv+0x24/0x30 [13634.939934] ? netlink_unicast+0x177/0x220 [13634.939944] ? netlink_sendmsg+0x2fe/0x3b0 [13634.939954] ? _copy_from_user+0x39/0x40 [13634.939964] ? sock_sendmsg+0x30/0x40 [13634.940159] ? ___sys_sendmsg+0x29d/0x2b0 [13634.940326] ? __alloc_pages_nodemask+0xdf/0x230 [13634.940478] ? mem_cgroup_commit_charge+0x7c/0x4e0 [13634.940592] ? mem_cgroup_try_charge+0x76/0x1a0 [13634.940701] ? __handle_mm_fault+0xdb9/0x10b0 [13634.940809] ? __sys_sendmsg+0x51/0x90 [13634.940917] ? entry_SYSCALL_64_fastpath+0x1e/0xad The problem is that the bridge's VLAN group is created after setting the default PVID, when registering the netdevice and executing its ndo_init(). Fix this by changing the order of both operations, so that br_changelink() is only processed after the netdevice is registered, when the VLAN group is already initialized. Fixes: b6677449dff6 ("bridge: netlink: call br_changelink() during br_dev_newlink()") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Peter V. Saveliev <peter@svinota.eu> Tested-by: Peter V. Saveliev <peter@svinota.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-12bridge: implement missing ndo_uninit()Ido Schimmel4-12/+21
While the bridge driver implements an ndo_init(), it was missing a symmetric ndo_uninit(), causing the different de-initialization operations to be scattered around its dellink() and destructor(). Implement a symmetric ndo_uninit() and remove the overlapping operations from its dellink() and destructor(). This is a prerequisite for the next patch, as it allows us to have a proper cleanup upon changelink() failure during the bridge's newlink(). Fixes: b6677449dff6 ("bridge: netlink: call br_changelink() during br_dev_newlink()") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-10tcp: clear saved_syn in tcp_disconnect()Eric Dumazet1-0/+1
In the (very unlikely) case a passive socket becomes a listener, we do not want to duplicate its saved SYN headers. This would lead to double frees, use after free, and please hackers and various fuzzers Tested: 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, IPPROTO_TCP, TCP_SAVE_SYN, [1], 4) = 0 +0 fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 5) = 0 +0 < S 0:0(0) win 32972 <mss 1460,nop,wscale 7> +0 > S. 0:0(0) ack 1 <...> +.1 < . 1:1(0) ack 1 win 257 +0 accept(3, ..., ...) = 4 +0 connect(4, AF_UNSPEC, ...) = 0 +0 close(3) = 0 +0 bind(4, ..., ...) = 0 +0 listen(4, 5) = 0 +0 < S 0:0(0) win 32972 <mss 1460,nop,wscale 7> +0 > S. 0:0(0) ack 1 <...> +.1 < . 1:1(0) ack 1 win 257 Fixes: cd8ae85299d5 ("tcp: provide SYN headers for passive connections") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-09netfilter: nf_ct_expect: use proper RCU list traversal/update APIsLiping Zhang2-5/+5
We should use proper RCU list APIs to manipulate help->expectations, as we can dump the conntrack's expectations via nfnetlink, i.e. in ctnetlink_exp_ct_dump_table(), where only rcu_read_lock is acquired. So for list traversal, use hlist_for_each_entry_rcu; for list add/del, use hlist_add_head_rcu and hlist_del_rcu. Signed-off-by: Liping Zhang <zlpnobody@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-04-09netfilter: ctnetlink: skip dumping expect when nfct_help(ct) is NULLLiping Zhang1-0/+6
For IPCTNL_MSG_EXP_GET, if the CTA_EXPECT_MASTER attr is specified, then the NLM_F_DUMP request will dump the expectations related to this connection tracking. But we forget to check whether the conntrack has nf_conn_help or not, so if nfct_help(ct) is NULL, oops will happen: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: ctnetlink_exp_ct_dump_table+0xf9/0x1e0 [nf_conntrack_netlink] Call Trace: ? ctnetlink_exp_ct_dump_table+0x75/0x1e0 [nf_conntrack_netlink] netlink_dump+0x124/0x2a0 __netlink_dump_start+0x161/0x190 ctnetlink_dump_exp_ct+0x16c/0x1bc [nf_conntrack_netlink] ? ctnetlink_exp_fill_info.constprop.33+0xf0/0xf0 [nf_conntrack_netlink] ? ctnetlink_glue_seqadj+0x20/0x20 [nf_conntrack_netlink] ctnetlink_get_expect+0x32e/0x370 [nf_conntrack_netlink] ? debug_lockdep_rcu_enabled+0x1d/0x20 nfnetlink_rcv_msg+0x60a/0x6a9 [nfnetlink] ? nfnetlink_rcv_msg+0x1b9/0x6a9 [nfnetlink] [...] Signed-off-by: Liping Zhang <zlpnobody@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-04-09netfilter: make it safer during the inet6_dev->addr_list traversalLiping Zhang2-1/+6
inet6_dev->addr_list is protected by inet6_dev->lock, so only using rcu_read_lock is not enough, we should acquire read_lock_bh(&idev->lock) before the inet6_dev->addr_list traversal. Signed-off-by: Liping Zhang <zlpnobody@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-04-09netfilter: ctnetlink: make it safer when checking the ct helper nameLiping Zhang1-5/+10
One CPU is doing ctnetlink_change_helper(), while another CPU is doing unhelp() at the same time. So even if help->helper is not NULL at first, the later statement strcmp(help->helper->name, ...) may still access the NULL pointer. So we must use rcu_read_lock and rcu_dereference to avoid such _bad_ thing happen. Fixes: f95d7a46bc57 ("netfilter: ctnetlink: Fix regression in CTA_HELP processing") Signed-off-by: Liping Zhang <zlpnobody@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-04-09netfilter: helper: Add the rcu lock when call __nf_conntrack_helper_findGao Feng2-7/+20
When invoke __nf_conntrack_helper_find, it needs the rcu lock to protect the helper module which would not be unloaded. Now there are two caller nf_conntrack_helper_try_module_get and ctnetlink_create_expect which don't hold rcu lock. And the other callers left like ctnetlink_change_helper, ctnetlink_create_conntrack, and ctnetlink_glue_attach_expect, they already hold the rcu lock or spin_lock_bh. Remove the rcu lock in functions nf_ct_helper_expectfn_find_by_name and nf_ct_helper_expectfn_find_by_symbol. Because they return one pointer which needs rcu lock, so their caller should hold the rcu lock, not in these two functions. Signed-off-by: Gao Feng <fgao@ikuai8.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-04-09netfilter: ctnetlink: using bit to represent the ct eventLiping Zhang1-2/+2
Otherwise, creating a new conntrack via nfnetlink: # conntrack -I -p udp -s 1.1.1.1 -d 2.2.2.2 -t 10 --sport 10 --dport 20 will emit the wrong ct events(where UPDATE should be NEW): # conntrack -E [UPDATE] udp 17 10 src=1.1.1.1 dst=2.2.2.2 sport=10 dport=20 [UNREPLIED] src=2.2.2.2 dst=1.1.1.1 sport=20 dport=10 mark=0 Signed-off-by: Liping Zhang <zlpnobody@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-04-08netfilter: xt_TCPMSS: add more sanity tests on tcph->doffEric Dumazet1-1/+5
Denys provided an awesome KASAN report pointing to an use after free in xt_TCPMSS I have provided three patches to fix this issue, either in xt_TCPMSS or in xt_tcpudp.c. It seems xt_TCPMSS patch has the smallest possible impact. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Denys Fedoryshchenko <nuclearcat@nuclearcat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-04-08net: tcp: Increase TCP_MIB_OUTRSTS even though fail to alloc skbGao Feng1-2/+2
Because TCP_MIB_OUTRSTS is an important count, so always increase it whatever send it successfully or not. Now move the increment of TCP_MIB_OUTRSTS to the top of tcp_send_active_reset to make sure it is increased always even though fail to alloc skb. Signed-off-by: Gao Feng <fgao@ikuai8.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-08l2tp: don't mask errors in pppol2tp_getsockopt()Guillaume Nault1-1/+6
pppol2tp_getsockopt() doesn't take into account the error code returned by pppol2tp_tunnel_getsockopt() or pppol2tp_session_getsockopt(). If error occurs there, pppol2tp_getsockopt() continues unconditionally and reports erroneous values. Fixes: fd558d186df2 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-08l2tp: don't mask errors in pppol2tp_setsockopt()Guillaume Nault1-2/+0
pppol2tp_setsockopt() unconditionally overwrites the error value returned by pppol2tp_tunnel_setsockopt() or pppol2tp_session_setsockopt(), thus hiding errors from userspace. Fixes: fd558d186df2 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-07tcp: restrict F-RTO to work-around broken middle-boxesYuchung Cheng1-8/+12
The recent extension of F-RTO 89fe18e44 ("tcp: extend F-RTO to catch more spurious timeouts") interacts badly with certain broken middle-boxes. These broken boxes modify and falsely raise the receive window on the ACKs. During a timeout induced recovery, F-RTO would send new data packets to probe if the timeout is false or not. Since the receive window is falsely raised, the receiver would silently drop these F-RTO packets. The recovery would take N (exponentially backoff) timeouts to repair N packet losses. A TCP performance killer. Due to this unfortunate situation, this patch removes this extension to revert F-RTO back to the RFC specification. Fixes: 89fe18e44f7e ("tcp: extend F-RTO to catch more spurious timeouts") Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-02 12:24:27 +0300