summaryrefslogtreecommitdiff
path: root/net/sctp
AgeCommit message (Collapse)AuthorFilesLines
2011-04-28sctp: clean up route lookup callsVlad Yasevich3-29/+23
Change the call to take the transport parameter and set the cached 'dst' appropriately inside the get_dst() function calls. This will allow us in the future to clean up source address storage as well. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-28sctp: remove useless arguments from get_saddr() callVlad Yasevich3-6/+2
There is no point in passing a destination address to a get_saddr() call. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-28sctp: make sctp over IPv6 work with IPsecVlad Yasevich1-5/+11
SCTP never called xfrm_output after it's v6 route lookups so that never really worked with ipsec. Additioanlly, we never passed port nubmers and protocol in the flowi, so any port based policies were never applied as well. Now that we can fixed ipv6 routing lookup code, using ip6_dst_lookup_flow() and pass port numbers. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-28sctp: cache the ipv6 source after route lookupVlad Yasevich4-119/+106
The ipv6 routing lookup does give us a source address, but instead of filling it into the dst, it's stored in the flowi. We can use that instead of going through the entire source address selection again. Also the useless ->dst_saddr member of sctp_pf is removed. And sctp_v6_dst_saddr() is removed, instead by introduce sctp_v6_to_addr(), which can be reused to cleanup some dup code. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-28sctp: fix sctp to work with ipv6 source address routingWeixing Shi1-1/+43
In the below test case, using the source address routing, sctp can not work. Node-A 1)ifconfig eth0 inet6 add 2001:1::1/64 2)ip -6 rule add from 2001:1::1 table 100 pref 100 3)ip -6 route add 2001:2::1 dev eth0 table 100 4)sctp_darn -H 2001:1::1 -P 250 -l & Node-B 1)ifconfig eth0 inet6 add 2001:2::1/64 2)ip -6 rule add from 2001:2::1 table 100 pref 100 3)ip -6 route add 2001:1::1 dev eth0 table 100 4)sctp_darn -H 2001:2::1 -P 250 -h 2001:1::1 -p 250 -s root cause: Node-A and Node-B use the source address routing, and at begining, source address will be NULL,sctp will search the routing table by the destination address, because using the source address routing table, and the result dst_entry will be NULL. solution: walk through the bind address list to get the source address and then lookup the routing table again to get the correct dst_entry. Signed-off-by: Weixing Shi <Weixing.Shi@windriver.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-27Revert wrong fixes for common misspellingsLucas De Marchi1-1/+1
These changes were incorrectly fixed by codespell. They were now manually corrected. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-04-22inet: constify ip headers and in6_addrEric Dumazet2-2/+2
Add const qualifiers to structs iphdr, ipv6hdr and in6_addr pointers where possible, to make code intention more obvious. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-21sctp: implement event notification SCTP_SENDER_DRY_EVENTWei Yongjun3-1/+53
This patch implement event notification SCTP_SENDER_DRY_EVENT. SCTP Socket API Extensions: 6.1.9. SCTP_SENDER_DRY_EVENT When the SCTP stack has no more user data to send or retransmit, this notification is given to the user. Also, at the time when a user app subscribes to this event, if there is no data to be sent or retransmit, the stack will immediately send up this notification. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-21sctp: change auth event type name to SCTP_AUTHENTICATION_EVENTWei Yongjun1-1/+1
This patch change the auth event type name to SCTP_AUTHENTICATION_EVENT, which is based on API extension compliance. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-21sctp: implement socket option SCTP_GET_ASSOC_ID_LISTWei Yongjun1-0/+52
This patch Implement socket option SCTP_GET_ASSOC_ID_LIST. SCTP Socket API Extension: 8.2.6. Get the Current Identifiers of Associations (SCTP_GET_ASSOC_ID_LIST) This option gets the current list of SCTP association identifiers of the SCTP associations handled by a one-to-many style socket. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20sctp: move chunk from retransmit queue to abandoned listWei Yongjun1-0/+7
If there is still data waiting to retransmit and remain in retransmit queue, while doing the next retransmit, if the chunk is abandoned, we should move it to abandoned list. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20sctp: make heartbeat information in sctp_make_heartbeat()Wei Yongjun2-15/+14
Make heartbeat information in sctp_make_heartbeat() instead of make it in sctp_sf_heartbeat() directly for common using. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20sctp: fix to check the source address of COOKIE-ECHO chunkWei Yongjun3-16/+27
SCTP does not check whether the source address of COOKIE-ECHO chunk is the original address of INIT chunk or part of the any address parameters saved in COOKIE in CLOSED state. So even if the COOKIE-ECHO chunk is from any address but with correct COOKIE, the COOKIE-ECHO chunk still be accepted. If the COOKIE is not from a valid address, the assoc should not be established. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20sctp: handle ootb packet in chunk order as definedShan Wei2-15/+21
Changed the order of processing SHUTDOWN ACK and COOKIE ACK refer to section 8.4:Handle "Out of the Blue" Packets. SHUTDOWN ACK chunk should be processed before processing "Stale Cookie" ERROR or a COOKIE ACK. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20sctp: bail from sctp_endpoint_lookup_assoc() if not boundVlad Yasevich1-6/+14
The sctp_endpoint_lookup_assoc() function uses a port hash to lookup the association and then checks to see if any of them are on the current endpoint. However, if the current endpoint is not bound, there can't be any associations on it, thus we can bail early. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20sctp: remove completely unsed EMPTY stateVlad Yasevich3-78/+0
SCTP does not SCTP_STATE_EMPTY and we can never be in that state. Remove useless code. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20sctp: check invalid value of length parameter in error causeShan Wei1-1/+8
RFC4960, section 3.3.7 said: If an endpoint receives an ABORT with a format error or no TCB is found, it MUST silently discard it. When an endpoint receives ABORT that parameter value is invalid, drop it. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20sctp: check parameter value of length in ERROR chunkShan Wei1-0/+5
When an endpoint receives ERROR that parameter value is invalid, send an ABORT to peer with a Protocol Violation error code. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20sctp: Release all routes when processing acks ADD_IP or DEL_IPVlad Yasevich1-6/+2
When processing an ACK for ADD_IP parameter, we only release the routes on non-active transports. This can cause a wrong source address to be used. We can release the routes and cause new route lookups and source address selection so that new addresses can be used as source. Additionally, we don't need to lookup routes for all transports at the same time. We can let the transmit code path update the cached route when the transport actually sends something. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20sctp: Allow bindx_del to accept 0 portVlad Yasevich1-1/+5
We allow 0 port when adding new addresses. It only makes sence to allow 0 port when removing addresses. When removing the currently bound port will be used when the port in the address is set to 0. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20sctp: teach CACC algorithm about removed transportsVlad Yasevich1-3/+8
When we have have to remove a transport due to ASCONF, we move the data to a new active path. This can trigger CACC algorithm to not mark that data as missing when SACKs arrive. This is because the transport passed to the CACC algorithm is the one this data is sitting on, not the one it was sent on (that one may be gone). So, by sending the original transport (even if it's NULL), we may start marking data as missing. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20sctp: use memdup_user to copy data from userspaceShan Wei1-16/+6
Use common function to simply code. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20sctp: kill abandoned SCTP_CMD_TRANSMIT commandShan Wei1-6/+0
Remove SCTP_CMD_TRANSMIT command as it never be used. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20sctp: use common head of addr parameter to access member in addr-unrelated codeShan Wei2-6/+6
The 'p' member of struct sctp_paramhdr is common part for IPv4 addr parameter and IPv6 addr parameter in union sctp_addr_param. For addr-related code, use specified addr parameter. Otherwise, use common header to access type/length member. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20sctp: fix the comment of sctp_sf_violation_paramlen()Shan Wei1-2/+3
Update the comment about sctp_sf_violation_paramlen() to be more precise. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-13sctp: fix oops while removed transport still using as retran pathWei Yongjun1-0/+2
Since we can not update retran path to unconfirmed transports, when we remove a peer, the retran path may not be update if the other transports are all unconfirmed, and we will still using the removed transport as the retran path. This may cause panic if retrasnmit happen. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-13sctp: fix oops when updating retransmit path with DEBUG onVlad Yasevich1-0/+2
commit fbdf501c9374966a56829ecca3a7f25d2b49a305 sctp: Do no select unconfirmed transports for retransmissions Introduced the initial falt. commit d598b166ced20d9b9281ea3527c0e18405ddb803 sctp: Make sure we always return valid retransmit path Solved the problem, but forgot to change the DEBUG statement. Thus it was still possible to dereference a NULL pointer. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-07Merge branch 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6Linus Torvalds10-23/+23
* 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6: Fix common misspellings
2011-04-02sctp: malloc enough room for asconf-ack chunkWei Yongjun1-2/+2
Sometime the ASCONF_ACK parameters can equal to the fourfold of ASCONF parameters, this only happend in some special case: ASCONF parameter is : Unrecognized Parameter (4 bytes) ASCONF_ACK parameter should be: Error Cause Indication parameter (8 bytes header) + Error Cause (4 bytes header) + Unrecognized Parameter (4bytes) Four 4bytes Unrecognized Parameters in ASCONF chunk will cause panic. Pid: 0, comm: swapper Not tainted 2.6.38-next+ #22 Bochs Bochs EIP: 0060:[<c0717eae>] EFLAGS: 00010246 CPU: 0 EIP is at skb_put+0x60/0x70 EAX: 00000077 EBX: c09060e2 ECX: dec1dc30 EDX: c09469c0 ESI: 00000000 EDI: de3c8d40 EBP: dec1dc58 ESP: dec1dc2c DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process swapper (pid: 0, ti=dec1c000 task=c09aef20 task.ti=c0980000) Stack: c09469c0 e1894fa4 00000044 00000004 de3c8d00 de3c8d00 de3c8d44 de3c8d40 c09060e2 de25dd80 de3c8d40 dec1dc7c e1894fa4 dec1dcb0 00000040 00000004 00000000 00000800 00000004 00000004 dec1dce0 e1895a2b dec1dcb4 de25d960 Call Trace: [<e1894fa4>] ? sctp_addto_chunk+0x4e/0x89 [sctp] [<e1894fa4>] sctp_addto_chunk+0x4e/0x89 [sctp] [<e1895a2b>] sctp_process_asconf+0x32f/0x3d1 [sctp] [<e188d554>] sctp_sf_do_asconf+0xf8/0x173 [sctp] [<e1890b02>] sctp_do_sm+0xb8/0x159 [sctp] [<e18a2248>] ? sctp_cname+0x0/0x52 [sctp] [<e189392d>] sctp_assoc_bh_rcv+0xac/0xe3 [sctp] [<e1897d76>] sctp_inq_push+0x2d/0x30 [sctp] [<e18a21b2>] sctp_rcv+0x7a7/0x83d [sctp] [<c077a95c>] ? ipv4_confirm+0x118/0x125 [<c073a970>] ? nf_iterate+0x34/0x62 [<c074789d>] ? ip_local_deliver_finish+0x0/0x194 [<c074789d>] ? ip_local_deliver_finish+0x0/0x194 [<c0747992>] ip_local_deliver_finish+0xf5/0x194 [<c074789d>] ? ip_local_deliver_finish+0x0/0x194 [<c0747a6e>] NF_HOOK.clone.1+0x3d/0x44 [<c0747ab3>] ip_local_deliver+0x3e/0x44 [<c074789d>] ? ip_local_deliver_finish+0x0/0x194 [<c074775c>] ip_rcv_finish+0x29f/0x2c7 [<c07474bd>] ? ip_rcv_finish+0x0/0x2c7 [<c0747a6e>] NF_HOOK.clone.1+0x3d/0x44 [<c0747cae>] ip_rcv+0x1f5/0x233 [<c07474bd>] ? ip_rcv_finish+0x0/0x2c7 [<c071dce3>] __netif_receive_skb+0x310/0x336 [<c07221f3>] netif_receive_skb+0x4b/0x51 [<e0a4ed3d>] cp_rx_poll+0x1e7/0x29c [8139cp] [<c072275e>] net_rx_action+0x65/0x13a [<c0445a54>] __do_softirq+0xa1/0x149 [<c04459b3>] ? __do_softirq+0x0/0x149 <IRQ> [<c0445891>] ? irq_exit+0x37/0x72 [<c040a7e9>] ? do_IRQ+0x81/0x95 [<c07b3670>] ? common_interrupt+0x30/0x38 [<c0428058>] ? native_safe_halt+0xa/0xc [<c040f5d7>] ? default_idle+0x58/0x92 [<c0408fb0>] ? cpu_idle+0x96/0xb2 [<c0797989>] ? rest_init+0x5d/0x5f [<c09fd90c>] ? start_kernel+0x34b/0x350 [<c09fd0cb>] ? i386_start_kernel+0xba/0xc1 Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-31Fix common misspellingsLucas De Marchi10-23/+23
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31sctp: Pass __GFP_NOWARN to hash table allocation attempts.David S. Miller1-2/+2
Like DCCP and other similar pieces of code, there are mechanisms here to try allocating smaller hash tables if the allocation fails. So pass in __GFP_NOWARN like the others do instead of emitting a scary message. Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-13ipv6: Convert to use flowi6 where applicable.David S. Miller1-21/+21
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-13net: Put fl4_* macros to struct flowi4 and use them again.David S. Miller1-4/+4
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-13ipv4: Use flowi4 in public route lookup interfaces.David S. Miller1-15/+15
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-13net: Make flowi ports AF dependent.David S. Miller1-4/+4
Create two sets of port member accessors, one set prefixed by fl4_* and the other prefixed by fl6_* This will let us to create AF optimal flow instances. It will work because every context in which we access the ports, we have to be fully aware of which AF the flowi is anyways. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-13net: Put flowi_* prefix on AF independent members of struct flowiDavid S. Miller2-6/+6
I intend to turn struct flowi into a union of AF specific flowi structs. There will be a common structure that each variant includes first, much like struct sock_common. This is the first step to move in that direction. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-08sctp: several declared/set but unused fixesHagen Paul Pfeifer6-18/+1
Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-03ipv4: Make output route lookup return rtable directly.David S. Miller1-3/+4
Instead of on the stack. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22net: add __rcu annotations to sk_wq and wqEric Dumazet1-4/+5
Add proper RCU annotations/verbs to sk_wq and wq members Fix __sctp_write_space() sk_sleep() abuse (and sock->wq access) Fix sunrpc sk_sleep() abuse too Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-20sctp: fix compile warnings in sctp_tsnmap_num_gabsShan Wei1-1/+1
net/sctp/tsnmap.c: In function ‘sctp_tsnmap_num_gabs’: net/sctp/tsnmap.c:347: warning: ‘start’ may be used uninitialized in this function net/sctp/tsnmap.c:347: warning: ‘end’ may be used uninitialized in this function Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-20sctp: fix reporting of unknown parametersJiri Bohac1-5/+5
commit 5fa782c2f5ef6c2e4f04d3e228412c9b4a4c8809 re-worked the handling of unknown parameters. sctp_init_cause_fixed() can now return -ENOSPC if there is not enough tailroom in the error chunk skb. When this happens, the error header is not appended to the error chunk. In that case, the payload of the unknown parameter should not be appended either. Signed-off-by: Jiri Bohac <jbohac@suse.cz> Acked-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-20sctp: user perfect name for Delayed SACK Timer optionShan Wei1-2/+2
The option name of Delayed SACK Timer should be SCTP_DELAYED_SACK, not SCTP_DELAYED_ACK. Left SCTP_DELAYED_ACK be concomitant with SCTP_DELAYED_SACK, for making compatibility with existing applications. Reference: 8.1.19. Get or Set Delayed SACK Timer (SCTP_DELAYED_SACK) （http://tools.ietf.org/html/draft-ietf-tsvwg-sctpsocket-25) Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Acked-by: Wei Yongjun <yjwei@cn.fujitsu.com> Acked-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-17Merge branch 'master' of ↵David S. Miller1-1/+9
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/bnx2x/bnx2x.h drivers/net/wireless/iwlwifi/iwl-1000.c drivers/net/wireless/iwlwifi/iwl-6000.c drivers/net/wireless/iwlwifi/iwl-core.h drivers/vhost/vhost.c
2010-12-17sctp: fix the return value of getting the sctp partial delivery pointWei Yongjun1-1/+1
Get the sctp partial delivery point using SCTP_PARTIAL_DELIVERY_POINT socket option should return 0 if success, not -ENOTSUPP. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Acked-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-11SCTP: Fix SCTP_SET_PEER_PRIMARY_ADDR to accpet v4mapped addressWei Yongjun1-0/+8
SCTP_SET_PEER_PRIMARY_ADDR does not accpet v4mapped address, using v4mapped address in SCTP_SET_PEER_PRIMARY_ADDR socket option will get -EADDRNOTAVAIL error if v4map is enabled. This patch try to fix it by mapping v4mapped address to v4 address if allowed. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Acked-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-07Fix a typo in datagram.c and sctp/socket.c.David Shwatrz1-1/+1
Hi, This patch fixes a typo in net/core/datagram.c and in net/sctp/socket.c Regards, David Shwartz Signed-off-by: David Shwartz <dshwatrz@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-10net: avoid limits overflowEric Dumazet3-5/+5
Robin Holt tried to boot a 16TB machine and found some limits were reached : sysctl_tcp_mem[2], sysctl_udp_mem[2] We can switch infrastructure to use long "instead" of "int", now atomic_long_t primitives are available for free. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Reported-by: Robin Holt <holt@sgi.com> Reviewed-by: Robin Holt <holt@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds15-107/+146
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1699 commits) bnx2/bnx2x: Unsupported Ethtool operations should return -EINVAL. vlan: Calling vlan_hwaccel_do_receive() is always valid. tproxy: use the interface primary IP address as a default value for --on-ip tproxy: added IPv6 support to the socket match cxgb3: function namespace cleanup tproxy: added IPv6 support to the TPROXY target tproxy: added IPv6 socket lookup function to nf_tproxy_core be2net: Changes to use only priority codes allowed by f/w tproxy: allow non-local binds of IPv6 sockets if IP_TRANSPARENT is enabled tproxy: added tproxy sockopt interface in the IPV6 layer tproxy: added udp6_lib_lookup function tproxy: added const specifiers to udp lookup functions tproxy: split off ipv6 defragmentation to a separate module l2tp: small cleanup nf_nat: restrict ICMP translation for embedded header can: mcp251x: fix generation of error frames can: mcp251x: fix endless loop in interrupt handler if CANINTF_MERRF is set can-raw: add msg_flags to distinguish local traffic 9p: client code cleanup rds: make local functions/variables static ... Fix up conflicts in net/core/dev.c, drivers/net/pcmcia/smc91c92_cs.c and drivers/net/wireless/ath/ath9k/debug.c as per David
2010-10-22Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bklLinus Torvalds1-0/+1
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: vfs: make no_llseek the default vfs: don't use BKL in default_llseek llseek: automatically add .llseek fop libfs: use generic_file_llseek for simple_attr mac80211: disallow seeks in minstrel debug code lirc: make chardev nonseekable viotape: use noop_llseek raw: use explicit llseek file operations ibmasmfs: use generic_file_llseek spufs: use llseek in all file operations arm/omap: use generic_file_llseek in iommu_debug lkdtm: use generic_file_llseek in debugfs net/wireless: use generic_file_llseek in debugfs drm: use noop_llseek
2010-10-15llseek: automatically add .llseek fopArnd Bergmann1-0/+1
All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-24 19:45:42 +0300