summaryrefslogtreecommitdiff
path: root/net/rxrpc
AgeCommit message (Collapse)AuthorFilesLines
2019-10-31rxrpc: Fix handling of last subpacket of jumbo packetDavid Howells2-5/+14
When rxrpc_recvmsg_data() sets the return value to 1 because it's drained all the data for the last packet, it checks the last-packet flag on the whole packet - but this is wrong, since the last-packet flag is only set on the final subpacket of the last jumbo packet. This means that a call that receives its last packet in a jumbo packet won't complete properly. Fix this by having rxrpc_locate_data() determine the last-packet state of the subpacket it's looking at and passing that back to the caller rather than having the caller look in the packet header. The caller then needs to cache this in the rxrpc_call struct as rxrpc_locate_data() isn't then called again for this packet. Fixes: 248f219cb8bc ("rxrpc: Rewrite the data and ack handling code") Fixes: e2de6c404898 ("rxrpc: Use info in skbuff instead of reparsing a jumbo packet") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-16rxrpc: use rcu protection while reading sk->sk_user_dataEric Dumazet1-4/+8
We need to extend the rcu_read_lock() section in rxrpc_error_report() and use rcu_dereference_sk_user_data() instead of plain access to sk->sk_user_data to make sure all rules are respected. The compiler wont reload sk->sk_user_data at will, and RCU rules prevent memory beeing freed too soon. Fixes: f0308fb07080 ("rxrpc: Fix possible NULL pointer access in ICMP handling") Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-12rxrpc: Fix possible NULL pointer access in ICMP handlingDavid Howells1-0/+3
If an ICMP packet comes in on the UDP socket backing an AF_RXRPC socket as the UDP socket is being shut down, rxrpc_error_report() may get called to deal with it after sk_user_data on the UDP socket has been cleared, leading to a NULL pointer access when this local endpoint record gets accessed. Fix this by just returning immediately if sk_user_data was NULL. The oops looks like the following: #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page ... RIP: 0010:rxrpc_error_report+0x1bd/0x6a9 ... Call Trace: ? sock_queue_err_skb+0xbd/0xde ? __udp4_lib_err+0x313/0x34d __udp4_lib_err+0x313/0x34d icmp_unreach+0x1ee/0x207 icmp_rcv+0x25b/0x28f ip_protocol_deliver_rcu+0x95/0x10e ip_local_deliver+0xe9/0x148 __netif_receive_skb_one_core+0x52/0x6e process_backlog+0xdc/0x177 net_rx_action+0xf9/0x270 __do_softirq+0x1b6/0x39a ? smpboot_register_percpu_thread+0xce/0xce run_ksoftirqd+0x1d/0x42 smpboot_thread_fn+0x19e/0x1b3 kthread+0xf1/0xf6 ? kthread_delayed_work_timer_fn+0x83/0x83 ret_from_fork+0x24/0x30 Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Reported-by: syzbot+611164843bd48cc2190c@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-07rxrpc: Fix call crypto state cleanupDavid Howells6-7/+12
Fix the cleanup of the crypto state on a call after the call has been disconnected. As the call has been disconnected, its connection ref has been discarded and so we can't go through that to get to the security ops table. Fix this by caching the security ops pointer in the rxrpc_call struct and using that when freeing the call security state. Also use this in other places we're dealing with call-specific security. The symptoms look like: BUG: KASAN: use-after-free in rxrpc_release_call+0xb2d/0xb60 net/rxrpc/call_object.c:481 Read of size 8 at addr ffff888062ffeb50 by task syz-executor.5/4764 Fixes: 1db88c534371 ("rxrpc: Fix -Wframe-larger-than= warnings from on-stack crypto") Reported-by: syzbot+eed305768ece6682bb7f@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com>
2019-10-07rxrpc: rxrpc_peer needs to hold a ref on the rxrpc_local recordDavid Howells1-2/+3
The rxrpc_peer record needs to hold a reference on the rxrpc_local record it points as the peer is used as a base to access information in the rxrpc_local record. This can cause problems in __rxrpc_put_peer(), where we need the network namespace pointer, and in rxrpc_send_keepalive(), where we need to access the UDP socket, leading to symptoms like: BUG: KASAN: use-after-free in __rxrpc_put_peer net/rxrpc/peer_object.c:411 [inline] BUG: KASAN: use-after-free in rxrpc_put_peer+0x685/0x6a0 net/rxrpc/peer_object.c:435 Read of size 8 at addr ffff888097ec0058 by task syz-executor823/24216 Fix this by taking a ref on the local record for the peer record. Fixes: ace45bec6d77 ("rxrpc: Fix firewall route keepalive") Fixes: 2baec2c3f854 ("rxrpc: Support network namespacing") Reported-by: syzbot+b9be979c55f2bea8ed30@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com>
2019-10-07rxrpc: Fix trace-after-put looking at the put call recordDavid Howells2-12/+18
rxrpc_put_call() calls trace_rxrpc_call() after it has done the decrement of the refcount - which looks at the debug_id in the call record. But unless the refcount was reduced to zero, we no longer have the right to look in the record and, indeed, it may be deleted by some other thread. Fix this by getting the debug_id out before decrementing the refcount and then passing that into the tracepoint. Fixes: e34d4234b0b7 ("rxrpc: Trace rxrpc_call usage") Signed-off-by: David Howells <dhowells@redhat.com>
2019-10-07rxrpc: Fix trace-after-put looking at the put connection recordDavid Howells4-10/+13
rxrpc_put_*conn() calls trace_rxrpc_conn() after they have done the decrement of the refcount - which looks at the debug_id in the connection record. But unless the refcount was reduced to zero, we no longer have the right to look in the record and, indeed, it may be deleted by some other thread. Fix this by getting the debug_id out before decrementing the refcount and then passing that into the tracepoint. Fixes: 363deeab6d0f ("rxrpc: Add connection tracepoint and client conn state tracepoint") Signed-off-by: David Howells <dhowells@redhat.com>
2019-10-07rxrpc: Fix trace-after-put looking at the put peer recordDavid Howells1-4/+7
rxrpc_put_peer() calls trace_rxrpc_peer() after it has done the decrement of the refcount - which looks at the debug_id in the peer record. But unless the refcount was reduced to zero, we no longer have the right to look in the record and, indeed, it may be deleted by some other thread. Fix this by getting the debug_id out before decrementing the refcount and then passing that into the tracepoint. This can cause the following symptoms: BUG: KASAN: use-after-free in __rxrpc_put_peer net/rxrpc/peer_object.c:411 [inline] BUG: KASAN: use-after-free in rxrpc_put_peer+0x685/0x6a0 net/rxrpc/peer_object.c:435 Read of size 8 at addr ffff888097ec0058 by task syz-executor823/24216 Fixes: 1159d4b496f5 ("rxrpc: Add a tracepoint to track rxrpc_peer refcounting") Reported-by: syzbot+b9be979c55f2bea8ed30@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com>
2019-10-07rxrpc: Fix call ref leakDavid Howells1-0/+1
When sendmsg() finds a call to continue on with, if the call is in an inappropriate state, it doesn't release the ref it just got on that call before returning an error. This causes the following symptom to show up with kasan: BUG: KASAN: use-after-free in rxrpc_send_keepalive+0x8a2/0x940 net/rxrpc/output.c:635 Read of size 8 at addr ffff888064219698 by task kworker/0:3/11077 where line 635 is: whdr.epoch = htonl(peer->local->rxnet->epoch); The local endpoint (which cannot be pinned by the call) has been released, but not the peer (which is pinned by the call). Fix this by releasing the call in the error path. Fixes: 37411cad633f ("rxrpc: Fix potential NULL-pointer exception") Reported-by: syzbot+d850c266e3df14da1d31@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com>
2019-09-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-1/+1
Minor overlapping changes in the btusb and ixgbe drivers. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05rxrpc: Fix misplaced tracelineDavid Howells1-1/+1
There's a misplaced traceline in rxrpc_input_packet() which is looking at a packet that just got released rather than the replacement packet. Fix this by moving the traceline after the assignment that moves the new packet pointer to the actual packet pointer. Fixes: d0d5c0cd1e71 ("rxrpc: Use skb_unshare() rather than skb_cow_data()") Reported-by: Hillf Danton <hdanton@sina.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller17-242/+341
r8152 conflicts are the NAPI fixes in 'net' overlapping with some tasklet stuff in net-next Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31rxrpc: Fix lack of conn cleanup when local endpoint is cleaned up [ver #2]David Howells5-5/+50
When a local endpoint is ceases to be in use, such as when the kafs module is unloaded, the kernel will emit an assertion failure if there are any outstanding client connections: rxrpc: Assertion failed ------------[ cut here ]------------ kernel BUG at net/rxrpc/local_object.c:433! and even beyond that, will evince other oopses if there are service connections still present. Fix this by: (1) Removing the triggering of connection reaping when an rxrpc socket is released. These don't actually clean up the connections anyway - and further, the local endpoint may still be in use through another socket. (2) Mark the local endpoint as dead when we start the process of tearing it down. (3) When destroying a local endpoint, strip all of its client connections from the idle list and discard the ref on each that the list was holding. (4) When destroying a local endpoint, call the service connection reaper directly (rather than through a workqueue) to immediately kill off all outstanding service connections. (5) Make the service connection reaper reap connections for which the local endpoint is marked dead. Only after destroying the connections can we close the socket lest we get an oops in a workqueue that's looking at a connection or a peer. Fixes: 3d18cbb7fd0c ("rxrpc: Fix conn expiry timers") Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-27rxrpc: Use skb_unshare() rather than skb_cow_data()David Howells4-28/+48
The in-place decryption routines in AF_RXRPC's rxkad security module currently call skb_cow_data() to make sure the data isn't shared and that the skb can be written over. This has a problem, however, as the softirq handler may be still holding a ref or the Rx ring may be holding multiple refs when skb_cow_data() is called in rxkad_verify_packet() - and so skb_shared() returns true and __pskb_pull_tail() dislikes that. If this occurs, something like the following report will be generated. kernel BUG at net/core/skbuff.c:1463! ... RIP: 0010:pskb_expand_head+0x253/0x2b0 ... Call Trace: __pskb_pull_tail+0x49/0x460 skb_cow_data+0x6f/0x300 rxkad_verify_packet+0x18b/0xb10 [rxrpc] rxrpc_recvmsg_data.isra.11+0x4a8/0xa10 [rxrpc] rxrpc_kernel_recv_data+0x126/0x240 [rxrpc] afs_extract_data+0x51/0x2d0 [kafs] afs_deliver_fs_fetch_data+0x188/0x400 [kafs] afs_deliver_to_call+0xac/0x430 [kafs] afs_wait_for_call_to_complete+0x22f/0x3d0 [kafs] afs_make_call+0x282/0x3f0 [kafs] afs_fs_fetch_data+0x164/0x300 [kafs] afs_fetch_data+0x54/0x130 [kafs] afs_readpages+0x20d/0x340 [kafs] read_pages+0x66/0x180 __do_page_cache_readahead+0x188/0x1a0 ondemand_readahead+0x17d/0x2e0 generic_file_read_iter+0x740/0xc10 __vfs_read+0x145/0x1a0 vfs_read+0x8c/0x140 ksys_read+0x4a/0xb0 do_syscall_64+0x43/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by using skb_unshare() instead in the input path for DATA packets that have a security index != 0. Non-DATA packets don't need in-place encryption and neither do unencrypted DATA packets. Fixes: 248f219cb8bc ("rxrpc: Rewrite the data and ack handling code") Reported-by: Julian Wollrath <jwollrath@web.de> Signed-off-by: David Howells <dhowells@redhat.com>
2019-08-27rxrpc: Use the tx-phase skb flag to simplify tracingDavid Howells11-47/+47
Use the previously-added transmit-phase skbuff private flag to simplify the socket buffer tracing a bit. Which phase the skbuff comes from can now be divined from the skb rather than having to be guessed from the call state. We can also reduce the number of rxrpc_skb_trace values by eliminating the difference between Tx and Rx in the symbols. Signed-off-by: David Howells <dhowells@redhat.com>
2019-08-27rxrpc: Add a private skb flag to indicate transmission-phase skbsDavid Howells2-1/+3
Add a flag in the private data on an skbuff to indicate that this is a transmission-phase buffer rather than a receive-phase buffer. Signed-off-by: David Howells <dhowells@redhat.com>
2019-08-27rxrpc: Abstract out rxtx ring cleanupDavid Howells1-16/+17
Abstract out rxtx ring cleanup into its own function from its two callers. This makes it easier to apply the same changes to both. Signed-off-by: David Howells <dhowells@redhat.com>
2019-08-27rxrpc: Pass the input handler's data skb reference to the Rx ringDavid Howells1-5/+15
Pass the reference held on a DATA skb in the rxrpc input handler into the Rx ring rather than getting an additional ref for this and then dropping the original ref at the end. Signed-off-by: David Howells <dhowells@redhat.com>
2019-08-27rxrpc: Use info in skbuff instead of reparsing a jumbo packetDavid Howells3-136/+139
Use the information now cached in the skbuff private data to avoid the need to reparse a jumbo packet. We can find all the subpackets by dead reckoning, so it's only necessary to note how many there are, whether the last one is flagged as LAST_PACKET and whether any have the REQUEST_ACK flag set. This is necessary as once recvmsg() can see the packet, it can start modifying it, such as doing in-place decryption. Fixes: 248f219cb8bc ("rxrpc: Rewrite the data and ack handling code") Signed-off-by: David Howells <dhowells@redhat.com>
2019-08-27rxrpc: Improve jumbo packet countingDavid Howells3-12/+30
Improve the information stored about jumbo packets so that we don't need to reparse them so much later. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
2019-08-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller7-90/+110
Merge conflict of mlx5 resolved using instructions in merge commit 9566e650bf7fdf58384bb06df634f7531ca3a97e. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-14rxrpc: Fix read-after-free in rxrpc_queue_local()David Howells1-9/+10
rxrpc_queue_local() attempts to queue the local endpoint it is given and then, if successful, prints a trace line. The trace line includes the current usage count - but we're not allowed to look at the local endpoint at this point as we passed our ref on it to the workqueue. Fix this by reading the usage count before queuing the work item. Also fix the reading of local->debug_id for trace lines, which must be done with the same consideration as reading the usage count. Fixes: 09d2bf595db4 ("rxrpc: Add a tracepoint to track rxrpc_local refcounting") Reported-by: syzbot+78e71c5bab4f76a6a719@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com>
2019-08-14rxrpc: Fix local endpoint replacementDavid Howells1-1/+1
When a local endpoint (struct rxrpc_local) ceases to be in use by any AF_RXRPC sockets, it starts the process of being destroyed, but this doesn't cause it to be removed from the namespace endpoint list immediately as tearing it down isn't trivial and can't be done in softirq context, so it gets deferred. If a new socket comes along that wants to bind to the same endpoint, a new rxrpc_local object will be allocated and rxrpc_lookup_local() will use list_replace() to substitute the new one for the old. Then, when the dying object gets to rxrpc_local_destroyer(), it is removed unconditionally from whatever list it is on by calling list_del_init(). However, list_replace() doesn't reset the pointers in the replaced list_head and so the list_del_init() will likely corrupt the local endpoints list. Fix this by using list_replace_init() instead. Fixes: 730c5fd42c1e ("rxrpc: Fix local endpoint refcounting") Reported-by: syzbot+193e29e9387ea5837f1d@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com>
2019-08-12rxrpc: Fix local refcountingDavid Howells1-5/+7
Fix rxrpc_unuse_local() to handle a NULL local pointer as it can be called on an unbound socket on which rx->local is not yet set. The following reproduced (includes omitted): int main(void) { socket(AF_RXRPC, SOCK_DGRAM, AF_INET); return 0; } causes the following oops to occur: BUG: kernel NULL pointer dereference, address: 0000000000000010 ... RIP: 0010:rxrpc_unuse_local+0x8/0x1b ... Call Trace: rxrpc_release+0x2b5/0x338 __sock_release+0x37/0xa1 sock_close+0x14/0x17 __fput+0x115/0x1e9 task_work_run+0x72/0x98 do_exit+0x51b/0xa7a ? __context_tracking_exit+0x4e/0x10e do_group_exit+0xab/0xab __x64_sys_exit_group+0x14/0x17 do_syscall_64+0x89/0x1d4 entry_SYSCALL_64_after_hwframe+0x49/0xbe Reported-by: syzbot+20dee719a2e090427b5f@syzkaller.appspotmail.com Fixes: 730c5fd42c1e ("rxrpc: Fix local endpoint refcounting") Signed-off-by: David Howells <dhowells@redhat.com> cc: Jeffrey Altman <jaltman@auristor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-09rxrpc: Don't bother generating maxSkew in the ACK packetDavid Howells6-44/+28
Don't bother generating maxSkew in the ACK packet as it has been obsolete since AFS 3.1. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
2019-08-09rxrpc: Fix local endpoint refcountingDavid Howells4-39/+72
The object lifetime management on the rxrpc_local struct is broken in that the rxrpc_local_processor() function is expected to clean up and remove an object - but it may get requeued by packets coming in on the backing UDP socket once it starts running. This may result in the assertion in rxrpc_local_rcu() firing because the memory has been scheduled for RCU destruction whilst still queued: rxrpc: Assertion failed ------------[ cut here ]------------ kernel BUG at net/rxrpc/local_object.c:468! Note that if the processor comes around before the RCU free function, it will just do nothing because ->dead is true. Fix this by adding a separate refcount to count active users of the endpoint that causes the endpoint to be destroyed when it reaches 0. The original refcount can then be used to refcount objects through the work processor and cause the memory to be rcu freed when that reaches 0. Fixes: 4f95dd78a77e ("rxrpc: Rework local endpoint management") Reported-by: syzbot+1e0edc4b8b7494c28450@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com>
2019-08-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller4-1/+21
Just minor overlapping changes in the conflicts here. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30rxrpc: Fix -Wframe-larger-than= warnings from on-stack cryptoDavid Howells4-20/+96
rxkad sometimes triggers a warning about oversized stack frames when building with clang for a 32-bit architecture: net/rxrpc/rxkad.c:243:12: error: stack frame size of 1088 bytes in function 'rxkad_secure_packet' [-Werror,-Wframe-larger-than=] net/rxrpc/rxkad.c:501:12: error: stack frame size of 1088 bytes in function 'rxkad_verify_packet' [-Werror,-Wframe-larger-than=] The problem is the combination of SYNC_SKCIPHER_REQUEST_ON_STACK() in rxkad_verify_packet()/rxkad_secure_packet() with the relatively large scatterlist in rxkad_verify_packet_1()/rxkad_secure_packet_encrypt(). The warning does not show up when using gcc, which does not inline the functions as aggressively, but the problem is still the same. Allocate the cipher buffers from the slab instead, caching the allocated packet crypto request memory used for DATA packet crypto in the rxrpc_call struct. Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30rxrpc: Fix the lack of notification when sendmsg() fails on a DATA packetDavid Howells1-0/+1
Fix the fact that a notification isn't sent to the recvmsg side to indicate a call failed when sendmsg() fails to transmit a DATA packet with the error ENETUNREACH, EHOSTUNREACH or ECONNREFUSED. Without this notification, the afs client just sits there waiting for the call to complete in some manner (which it's not now going to do), which also pins the rxrpc call in place. This can be seen if the client has a scope-level IPv6 address, but not a global-level IPv6 address, and we try and transmit an operation to a server's IPv6 address. Looking in /proc/net/rxrpc/calls shows completed calls just sat there with an abort code of RX_USER_ABORT and an error code of -ENETUNREACH. Fixes: c54e43d752c7 ("rxrpc: Fix missing start of call timeout") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
2019-07-30rxrpc: Fix potential deadlockDavid Howells3-1/+20
There is a potential deadlock in rxrpc_peer_keepalive_dispatch() whereby rxrpc_put_peer() is called with the peer_hash_lock held, but if it reduces the peer's refcount to 0, rxrpc_put_peer() calls __rxrpc_put_peer() - which the tries to take the already held lock. Fix this by providing a version of rxrpc_put_peer() that can be called in situations where the lock is already held. The bug may produce the following lockdep report: ============================================ WARNING: possible recursive locking detected 5.2.0-next-20190718 #41 Not tainted -------------------------------------------- kworker/0:3/21678 is trying to acquire lock: 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: spin_lock_bh /./include/linux/spinlock.h:343 [inline] 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: __rxrpc_put_peer /net/rxrpc/peer_object.c:415 [inline] 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: rxrpc_put_peer+0x2d3/0x6a0 /net/rxrpc/peer_object.c:435 but task is already holding lock: 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: spin_lock_bh /./include/linux/spinlock.h:343 [inline] 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: rxrpc_peer_keepalive_dispatch /net/rxrpc/peer_event.c:378 [inline] 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: rxrpc_peer_keepalive_worker+0x6b3/0xd02 /net/rxrpc/peer_event.c:430 Fixes: 330bdcfadcee ("rxrpc: Fix the keepalive generator [ver #2]") Reported-by: syzbot+72af434e4b3417318f84@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
2019-07-19proc/sysctl: add shared variables for range checkMatteo Croce1-5/+4
In the sysctl code the proc_dointvec_minmax() function is often used to validate the user supplied value between an allowed range. This function uses the extra1 and extra2 members from struct ctl_table as minimum and maximum allowed value. On sysctl handler declaration, in every source file there are some readonly variables containing just an integer which address is assigned to the extra1 and extra2 members, so the sysctl range is enforced. The special values 0, 1 and INT_MAX are very often used as range boundary, leading duplication of variables like zero=0, one=1, int_max=INT_MAX in different source files: $ git grep -E '\.extra[12].*&(zero|one|int_max)' |wc -l 248 Add a const int array containing the most commonly used values, some macros to refer more easily to the correct array member, and use them instead of creating a local one for every object file. This is the bloat-o-meter output comparing the old and new binary compiled with the default Fedora config: # scripts/bloat-o-meter -d vmlinux.o.old vmlinux.o add/remove: 2/2 grow/shrink: 0/2 up/down: 24/-188 (-164) Data old new delta sysctl_vals - 12 +12 __kstrtab_sysctl_vals - 12 +12 max 14 10 -4 int_max 16 - -16 one 68 - -68 zero 128 28 -100 Total: Before=20583249, After=20583085, chg -0.00% [mcroce@redhat.com: tipc: remove two unused variables] Link: http://lkml.kernel.org/r/20190530091952.4108-1-mcroce@redhat.com [akpm@linux-foundation.org: fix net/ipv6/sysctl_net_ipv6.c] [arnd@arndb.de: proc/sysctl: make firmware loader table conditional] Link: http://lkml.kernel.org/r/20190617130014.1713870-1-arnd@arndb.de [akpm@linux-foundation.org: fix fs/eventpoll.c] Link: http://lkml.kernel.org/r/20190430180111.10688-1-mcroce@redhat.com Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kees Cook <keescook@chromium.org> Reviewed-by: Aaron Tomlin <atomlin@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2-2/+5
Pull networking updates from David Miller: "Some highlights from this development cycle: 1) Big refactoring of ipv6 route and neigh handling to support nexthop objects configurable as units from userspace. From David Ahern. 2) Convert explored_states in BPF verifier into a hash table, significantly decreased state held for programs with bpf2bpf calls, from Alexei Starovoitov. 3) Implement bpf_send_signal() helper, from Yonghong Song. 4) Various classifier enhancements to mvpp2 driver, from Maxime Chevallier. 5) Add aRFS support to hns3 driver, from Jian Shen. 6) Fix use after free in inet frags by allocating fqdirs dynamically and reworking how rhashtable dismantle occurs, from Eric Dumazet. 7) Add act_ctinfo packet classifier action, from Kevin Darbyshire-Bryant. 8) Add TFO key backup infrastructure, from Jason Baron. 9) Remove several old and unused ISDN drivers, from Arnd Bergmann. 10) Add devlink notifications for flash update status to mlxsw driver, from Jiri Pirko. 11) Lots of kTLS offload infrastructure fixes, from Jakub Kicinski. 12) Add support for mv88e6250 DSA chips, from Rasmus Villemoes. 13) Various enhancements to ipv6 flow label handling, from Eric Dumazet and Willem de Bruijn. 14) Support TLS offload in nfp driver, from Jakub Kicinski, Dirk van der Merwe, and others. 15) Various improvements to axienet driver including converting it to phylink, from Robert Hancock. 16) Add PTP support to sja1105 DSA driver, from Vladimir Oltean. 17) Add mqprio qdisc offload support to dpaa2-eth, from Ioana Radulescu. 18) Add devlink health reporting to mlx5, from Moshe Shemesh. 19) Convert stmmac over to phylink, from Jose Abreu. 20) Add PTP PHC (Physical Hardware Clock) support to mlxsw, from Shalom Toledo. 21) Add nftables SYNPROXY support, from Fernando Fernandez Mancera. 22) Convert tcp_fastopen over to use SipHash, from Ard Biesheuvel. 23) Track spill/fill of constants in BPF verifier, from Alexei Starovoitov. 24) Support bounded loops in BPF, from Alexei Starovoitov. 25) Various page_pool API fixes and improvements, from Jesper Dangaard Brouer. 26) Just like ipv4, support ref-countless ipv6 route handling. From Wei Wang. 27) Support VLAN offloading in aquantia driver, from Igor Russkikh. 28) Add AF_XDP zero-copy support to mlx5, from Maxim Mikityanskiy. 29) Add flower GRE encap/decap support to nfp driver, from Pieter Jansen van Vuuren. 30) Protect against stack overflow when using act_mirred, from John Hurley. 31) Allow devmap map lookups from eBPF, from Toke Høiland-Jørgensen. 32) Use page_pool API in netsec driver, Ilias Apalodimas. 33) Add Google gve network driver, from Catherine Sullivan. 34) More indirect call avoidance, from Paolo Abeni. 35) Add kTLS TX HW offload support to mlx5, from Tariq Toukan. 36) Add XDP_REDIRECT support to bnxt_en, from Andy Gospodarek. 37) Add MPLS manipulation actions to TC, from John Hurley. 38) Add sending a packet to connection tracking from TC actions, and then allow flower classifier matching on conntrack state. From Paul Blakey. 39) Netfilter hw offload support, from Pablo Neira Ayuso" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2080 commits) net/mlx5e: Return in default case statement in tx_post_resync_params mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync(). net: dsa: add support for BRIDGE_MROUTER attribute pkt_sched: Include const.h net: netsec: remove static declaration for netsec_set_tx_de() net: netsec: remove superfluous if statement netfilter: nf_tables: add hardware offload support net: flow_offload: rename tc_cls_flower_offload to flow_cls_offload net: flow_offload: add flow_block_cb_is_busy() and use it net: sched: remove tcf block API drivers: net: use flow block API net: sched: use flow block API net: flow_offload: add flow_block_cb_{priv, incref, decref}() net: flow_offload: add list handling functions net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free() net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_* net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND net: flow_offload: add flow_block_cb_setup_simple() net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC net: hisilicon: Add an rx_desc to adapt HI13X1_GMAC ...
2019-07-11Revert "Merge tag 'keys-acl-20190703' of ↵Linus Torvalds1-15/+4
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs" This reverts merge 0f75ef6a9cff49ff612f7ce0578bced9d0b38325 (and thus effectively commits 7a1ade847596 ("keys: Provide KEYCTL_GRANT_PERMISSION") 2e12256b9a76 ("keys: Replace uid/gid/perm permissions checking with an ACL") that the merge brought in). It turns out that it breaks booting with an encrypted volume, and Eric biggers reports that it also breaks the fscrypt tests [1] and loading of in-kernel X.509 certificates [2]. The root cause of all the breakage is likely the same, but David Howells is off email so rather than try to work it out it's getting reverted in order to not impact the rest of the merge window. [1] https://lore.kernel.org/lkml/20190710011559.GA7973@sol.localdomain/ [2] https://lore.kernel.org/lkml/20190710013225.GB7973@sol.localdomain/ Link: https://lore.kernel.org/lkml/CAHk-=wjxoeMJfeBahnWH=9zShKp2bsVy527vo3_y8HfOdhwAAw@mail.gmail.com/ Reported-by: Eric Biggers <ebiggers@kernel.org> Cc: David Howells <dhowells@redhat.com> Cc: James Morris <jmorris@namei.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-09Merge tag 'keys-acl-20190703' of ↵Linus Torvalds1-4/+15
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull keyring ACL support from David Howells: "This changes the permissions model used by keys and keyrings to be based on an internal ACL by the following means: - Replace the permissions mask internally with an ACL that contains a list of ACEs, each with a specific subject with a permissions mask. Potted default ACLs are available for new keys and keyrings. ACE subjects can be macroised to indicate the UID and GID specified on the key (which remain). Future commits will be able to add additional subject types, such as specific UIDs or domain tags/namespaces. Also split a number of permissions to give finer control. Examples include splitting the revocation permit from the change-attributes permit, thereby allowing someone to be granted permission to revoke a key without allowing them to change the owner; also the ability to join a keyring is split from the ability to link to it, thereby stopping a process accessing a keyring by joining it and thus acquiring use of possessor permits. - Provide a keyctl to allow the granting or denial of one or more permits to a specific subject. Direct access to the ACL is not granted, and the ACL cannot be viewed" * tag 'keys-acl-20190703' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: keys: Provide KEYCTL_GRANT_PERMISSION keys: Replace uid/gid/perm permissions checking with an ACL
2019-07-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+2
Two cases of overlapping changes, nothing fancy. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09Merge tag 'keys-namespace-20190627' of ↵Linus Torvalds2-3/+5
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull keyring namespacing from David Howells: "These patches help make keys and keyrings more namespace aware. Firstly some miscellaneous patches to make the process easier: - Simplify key index_key handling so that the word-sized chunks assoc_array requires don't have to be shifted about, making it easier to add more bits into the key. - Cache the hash value in the key so that we don't have to calculate on every key we examine during a search (it involves a bunch of multiplications). - Allow keying_search() to search non-recursively. Then the main patches: - Make it so that keyring names are per-user_namespace from the point of view of KEYCTL_JOIN_SESSION_KEYRING so that they're not accessible cross-user_namespace. keyctl_capabilities() shows KEYCTL_CAPS1_NS_KEYRING_NAME for this. - Move the user and user-session keyrings to the user_namespace rather than the user_struct. This prevents them propagating directly across user_namespaces boundaries (ie. the KEY_SPEC_* flags will only pick from the current user_namespace). - Make it possible to include the target namespace in which the key shall operate in the index_key. This will allow the possibility of multiple keys with the same description, but different target domains to be held in the same keyring. keyctl_capabilities() shows KEYCTL_CAPS1_NS_KEY_TAG for this. - Make it so that keys are implicitly invalidated by removal of a domain tag, causing them to be garbage collected. - Institute a network namespace domain tag that allows keys to be differentiated by the network namespace in which they operate. New keys that are of a type marked 'KEY_TYPE_NET_DOMAIN' are assigned the network domain in force when they are created. - Make it so that the desired network namespace can be handed down into the request_key() mechanism. This allows AFS, NFS, etc. to request keys specific to the network namespace of the superblock. This also means that the keys in the DNS record cache are thenceforth namespaced, provided network filesystems pass the appropriate network namespace down into dns_query(). For DNS, AFS and NFS are good, whilst CIFS and Ceph are not. Other cache keyrings, such as idmapper keyrings, also need to set the domain tag - for which they need access to the network namespace of the superblock" * tag 'keys-namespace-20190627' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: keys: Pass the network namespace into request_key mechanism keys: Network namespace domain tag keys: Garbage collect keys for which the domain has been removed keys: Include target namespace in match criteria keys: Move the user and user-session keyrings to the user_namespace keys: Namespace keyring names keys: Add a 'recurse' flag for keyring searches keys: Cache the hash value to avoid lots of recalculation keys: Simplify key description management
2019-07-02rxrpc: Fix send on a connected, but unbound socketDavid Howells1-2/+2
If sendmsg() or sendmmsg() is called on a connected socket that hasn't had bind() called on it, then an oops will occur when the kernel tries to connect the call because no local endpoint has been allocated. Fix this by implicitly binding the socket if it is in the RXRPC_CLIENT_UNBOUND state, just like it does for the RXRPC_UNBOUND state. Further, the state should be transitioned to RXRPC_CLIENT_BOUND after this to prevent further attempts to bind it. This can be tested with: #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/socket.h> #include <arpa/inet.h> #include <linux/rxrpc.h> static const unsigned char inet6_addr[16] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1, -1, 0xac, 0x14, 0x14, 0xaa }; int main(void) { struct sockaddr_rxrpc srx; struct cmsghdr *cm; struct msghdr msg; unsigned char control[16]; int fd; memset(&srx, 0, sizeof(srx)); srx.srx_family = 0x21; srx.srx_service = 0; srx.transport_type = AF_INET; srx.transport_len = 0x1c; srx.transport.sin6.sin6_family = AF_INET6; srx.transport.sin6.sin6_port = htons(0x4e22); srx.transport.sin6.sin6_flowinfo = htons(0x4e22); srx.transport.sin6.sin6_scope_id = htons(0xaa3b); memcpy(&srx.transport.sin6.sin6_addr, inet6_addr, 16); cm = (struct cmsghdr *)control; cm->cmsg_len = CMSG_LEN(sizeof(unsigned long)); cm->cmsg_level = SOL_RXRPC; cm->cmsg_type = RXRPC_USER_CALL_ID; *(unsigned long *)CMSG_DATA(cm) = 0; msg.msg_name = NULL; msg.msg_namelen = 0; msg.msg_iov = NULL; msg.msg_iovlen = 0; msg.msg_control = control; msg.msg_controllen = cm->cmsg_len; msg.msg_flags = 0; fd = socket(AF_RXRPC, SOCK_DGRAM, AF_INET); connect(fd, (struct sockaddr *)&srx, sizeof(srx)); sendmsg(fd, &msg, 0); return 0; } Leading to the following oops: BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page ... RIP: 0010:rxrpc_connect_call+0x42/0xa01 ... Call Trace: ? mark_held_locks+0x47/0x59 ? __local_bh_enable_ip+0xb6/0xba rxrpc_new_client_call+0x3b1/0x762 ? rxrpc_do_sendmsg+0x3c0/0x92e rxrpc_do_sendmsg+0x3c0/0x92e rxrpc_sendmsg+0x16b/0x1b5 sock_sendmsg+0x2d/0x39 ___sys_sendmsg+0x1a4/0x22a ? release_sock+0x19/0x9e ? reacquire_held_locks+0x136/0x160 ? release_sock+0x19/0x9e ? find_held_lock+0x2b/0x6e ? __lock_acquire+0x268/0xf73 ? rxrpc_connect+0xdd/0xe4 ? __local_bh_enable_ip+0xb6/0xba __sys_sendmsg+0x5e/0x94 do_syscall_64+0x7d/0x1bf entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 2341e0775747 ("rxrpc: Simplify connect() implementation and simplify sendmsg() op") Reported-by: syzbot+7966f2a0b2c7da8939b4@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-02rxrpc: Fix uninitialized error code in rxrpc_send_data_packet()David Howells1-0/+3
With gcc 4.1: net/rxrpc/output.c: In function ‘rxrpc_send_data_packet’: net/rxrpc/output.c:338: warning: ‘ret’ may be used uninitialized in this function Indeed, if the first jump to the send_fragmentable label is made, and the address family is not handled in the switch() statement, ret will be used uninitialized. Fix this by BUG()'ing as is done in other places in rxrpc where internal support for future address families will need adding. It should not be possible to reach this normally as the address families are checked up-front. Fixes: 5a924b8951f835b5 ("rxrpc: Don't store the rxrpc header in the Tx queue sk_buffs") Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28keys: Replace uid/gid/perm permissions checking with an ACLDavid Howells1-4/+15
Replace the uid/gid/perm permissions checking on a key with an ACL to allow the SETATTR and SEARCH permissions to be split. This will also allow a greater range of subjects to represented. ============ WHY DO THIS? ============ The problem is that SETATTR and SEARCH cover a slew of actions, not all of which should be grouped together. For SETATTR, this includes actions that are about controlling access to a key: (1) Changing a key's ownership. (2) Changing a key's security information. (3) Setting a keyring's restriction. And actions that are about managing a key's lifetime: (4) Setting an expiry time. (5) Revoking a key. and (proposed) managing a key as part of a cache: (6) Invalidating a key. Managing a key's lifetime doesn't really have anything to do with controlling access to that key. Expiry time is awkward since it's more about the lifetime of the content and so, in some ways goes better with WRITE permission. It can, however, be set unconditionally by a process with an appropriate authorisation token for instantiating a key, and can also be set by the key type driver when a key is instantiated, so lumping it with the access-controlling actions is probably okay. As for SEARCH permission, that currently covers: (1) Finding keys in a keyring tree during a search. (2) Permitting keyrings to be joined. (3) Invalidation. But these don't really belong together either, since these actions really need to be controlled separately. Finally, there are number of special cases to do with granting the administrator special rights to invalidate or clear keys that I would like to handle with the ACL rather than key flags and special checks. =============== WHAT IS CHANGED =============== The SETATTR permission is split to create two new permissions: (1) SET_SECURITY - which allows the key's owner, group and ACL to be changed and a restriction to be placed on a keyring. (2) REVOKE - which allows a key to be revoked. The SEARCH permission is split to create: (1) SEARCH - which allows a keyring to be search and a key to be found. (2) JOIN - which allows a keyring to be joined as a session keyring. (3) INVAL - which allows a key to be invalidated. The WRITE permission is also split to create: (1) WRITE - which allows a key's content to be altered and links to be added, removed and replaced in a keyring. (2) CLEAR - which allows a keyring to be cleared completely. This is split out to make it possible to give just this to an administrator. (3) REVOKE - see above. Keys acquire ACLs which consist of a series of ACEs, and all that apply are unioned together. An ACE specifies a subject, such as: (*) Possessor - permitted to anyone who 'possesses' a key (*) Owner - permitted to the key owner (*) Group - permitted to the key group (*) Everyone - permitted to everyone Note that 'Other' has been replaced with 'Everyone' on the assumption that you wouldn't grant a permit to 'Other' that you wouldn't also grant to everyone else. Further subjects may be made available by later patches. The ACE also specifies a permissions mask. The set of permissions is now: VIEW Can view the key metadata READ Can read the key content WRITE Can update/modify the key content SEARCH Can find the key by searching/requesting LINK Can make a link to the key SET_SECURITY Can change owner, ACL, expiry INVAL Can invalidate REVOKE Can revoke JOIN Can join this keyring CLEAR Can clear this keyring The KEYCTL_SETPERM function is then deprecated. The KEYCTL_SET_TIMEOUT function then is permitted if SET_SECURITY is set, or if the caller has a valid instantiation auth token. The KEYCTL_INVALIDATE function then requires INVAL. The KEYCTL_REVOKE function then requires REVOKE. The KEYCTL_JOIN_SESSION_KEYRING function then requires JOIN to join an existing keyring. The JOIN permission is enabled by default for session keyrings and manually created keyrings only. ====================== BACKWARD COMPATIBILITY ====================== To maintain backward compatibility, KEYCTL_SETPERM will translate the permissions mask it is given into a new ACL for a key - unless KEYCTL_SET_ACL has been called on that key, in which case an error will be returned. It will convert possessor, owner, group and other permissions into separate ACEs, if each portion of the mask is non-zero. SETATTR permission turns on all of INVAL, REVOKE and SET_SECURITY. WRITE permission turns on WRITE, REVOKE and, if a keyring, CLEAR. JOIN is turned on if a keyring is being altered. The KEYCTL_DESCRIBE function translates the ACL back into a permissions mask to return depending on possessor, owner, group and everyone ACEs. It will make the following mappings: (1) INVAL, JOIN -> SEARCH (2) SET_SECURITY -> SETATTR (3) REVOKE -> WRITE if SETATTR isn't already set (4) CLEAR -> WRITE Note that the value subsequently returned by KEYCTL_DESCRIBE may not match the value set with KEYCTL_SETATTR. ======= TESTING ======= This passes the keyutils testsuite for all but a couple of tests: (1) tests/keyctl/dh_compute/badargs: The first wrong-key-type test now returns EOPNOTSUPP rather than ENOKEY as READ permission isn't removed if the type doesn't have ->read(). You still can't actually read the key. (2) tests/keyctl/permitting/valid: The view-other-permissions test doesn't work as Other has been replaced with Everyone in the ACL. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-28keys: Pass the network namespace into request_key mechanismDavid Howells1-2/+2
Create a request_key_net() function and use it to pass the network namespace domain tag into DNS revolver keys and rxrpc/AFS keys so that keys for different domains can coexist in the same keyring. Signed-off-by: David Howells <dhowells@redhat.com> cc: netdev@vger.kernel.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: linux-afs@lists.infradead.org
2019-06-26keys: Network namespace domain tagDavid Howells1-0/+2
Create key domain tags for network namespaces and make it possible to automatically tag keys that are used by networked services (e.g. AF_RXRPC, AFS, DNS) with the default network namespace if not set by the caller. This allows keys with the same description but in different namespaces to coexist within a keyring. Signed-off-by: David Howells <dhowells@redhat.com> cc: netdev@vger.kernel.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: linux-afs@lists.infradead.org
2019-06-26keys: Add a 'recurse' flag for keyring searchesDavid Howells1-1/+1
Add a 'recurse' flag for keyring searches so that the flag can be omitted and recursion disabled, thereby allowing just the nominated keyring to be searched and none of the children. Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner19-95/+19
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 36Thomas Gleixner9-46/+9
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public licence as published by the free software foundation either version 2 of the licence or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 114 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520170857.552531963@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-16rxrpc: Allow the kernel to mark a call as being non-interruptibleDavid Howells5-3/+16
Allow kernel services using AF_RXRPC to indicate that a call should be non-interruptible. This allows kafs to make things like lock-extension and writeback data storage calls non-interruptible. If this is set, signals will be ignored for operations on that call where possible - such as waiting to get a call channel on an rxrpc connection. It doesn't prevent UDP sendmsg from being interrupted, but that will be handled by packet retransmission. rxrpc_kernel_recv_data() isn't affected by this since that never waits, preferring instead to return -EAGAIN and leave the waiting to the caller. Userspace initiated calls can't be set to be uninterruptible at this time. Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-16rxrpc: Provide kernel interface to set max lifespan on a callDavid Howells1-0/+25
Provide an interface to set max lifespan on a call from inside of the kernel without having to call kernel_sendmsg(). Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-16/+16
Three trivial overlapping conflicts. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30rxrpc: Fix net namespace cleanupDavid Howells1-16/+16
In rxrpc_destroy_all_calls(), there are two phases: (1) make sure the ->calls list is empty, emitting error messages if not, and (2) wait for the RCU cleanup to happen on outstanding calls (ie. ->nr_calls becomes 0). To avoid taking the call_lock, the function prechecks ->calls and if empty, it returns to avoid taking the lock - this is wrong, however: it still needs to go and do the second phase and wait for ->nr_calls to become 0. Without this, the rxrpc_net struct may get deallocated before we get to the RCU cleanup for the last calls. This can lead to: Slab corruption (Not tainted): kmalloc-16k start=ffff88802b178000, len=16384 050: 6b 6b 6b 6b 6b 6b 6b 6b 61 6b 6b 6b 6b 6b 6b 6b kkkkkkkkakkkkkkk Note the "61" at offset 0x58. This corresponds to the ->nr_calls member of struct rxrpc_net (which is >9k in size, and thus allocated out of the 16k slab). Fix this by flipping the condition on the if-statement, putting the locked section inside the if-body and dropping the return from there. The function will then always go on to wait for the RCU cleanup on outstanding calls. Fixes: 2baec2c3f854 ("rxrpc: Support network namespacing") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-5/+10
Two easy cases of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>