summaryrefslogtreecommitdiff
path: root/net/mac80211
AgeCommit message (Collapse)AuthorFilesLines
2016-05-12Merge tag 'mac80211-next-for-davem-2016-05-12' of ↵David S. Miller3-30/+61
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Some more work for 4.7, notably: * completion and fixups of nla_put_64_64bit() work * remove a/b/g/n from wext nickname to avoid confusion with 11ac (which wouldn't even fit fully there due to string length restrictions) along with some other minor changes/cleanups. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-12mac80211: allow software PS-Poll/U-APSD with AP_LINK_PSJohannes Berg1-26/+44
When using RSS, frames might not be processed in the correct order, and thus AP_LINK_PS must be used; most likely with firmware keeping track of the powersave state, this is the case in iwlwifi now. In this case, the driver can use ieee80211_sta_ps_transition() to still have mac80211 manage powersave buffering. However, for U-APSD and PS-Poll this isn't sufficient. If the device can't manage that entirely on its own, mac80211's code should be used. To allow this, export two functions: ieee80211_sta_uapsd_trigger() and ieee80211_sta_pspoll(). Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-05-12mac80211: allow same PN for AMSDU sub-framesSara Sharon1-4/+12
Some hardware (iwlwifi an example) de-aggregate AMSDUs and copy the IV as is to the generated MPDUs, so the same PN appears in multiple packets without being a replay attack. Allow driver to explicitly indicate that a frame is allowed to have the same PN as the previous frame. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-05-12mac80211: remove disconnected APs from BSS tableDavid Spinadel1-0/+5
In some cases, after a sudden AP disappearing and reconnection to another AP in the same ESS, user space gets the old AP in scan results (cached). User space may decide to roam to that old AP which will cause a disconnection and longer recovery. Remove APs that are probably out of range from BSS table. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-05-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+2
Conflicts: net/ipv4/ip_gre.c Minor conflicts between tunnel bug fixes in net and ipv6 tunnel cleanups in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-27mac80211: fix statistics leak if dev_alloc_name() failsJohannes Berg1-2/+2
In the case that dev_alloc_name() fails, e.g. because the name was given by the user and already exists, we need to clean up properly and free the per-CPU statistics. Fix that. Cc: stable@vger.kernel.org Fixes: 5a490510ba5f ("mac80211: use per-CPU TX/RX statistics") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-12cfg80211: remove enum ieee80211_bandJohannes Berg20-106/+106
This enum is already perfectly aliased to enum nl80211_band, and the only reason for it is that we get IEEE80211_NUM_BANDS out of it. There's no really good reason to not declare the number of bands in nl80211 though, so do that and remove the cfg80211 one. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller8-25/+86
2016-04-06mac80211: fix "warning: ‘target_metric’ may be used uninitialized"Jeff Mahoney1-1/+1
This fixes: net/mac80211/mesh_hwmp.c:603:26: warning: ‘target_metric’ may be used uninitialized in this function target_metric is only consumed when reply = true so no bug exists here, but not all versions of gcc realize it. Initialize to 0 to remove the warning. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-06mac80211: minstrel_ht: set A-MSDU tx limits based on selected max_prob_rateFelix Fietkau1-0/+54
Prevents excessive A-MSDU aggregation at low data rates or bad conditions. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-06mac80211: add A-MSDU tx supportFelix Fietkau5-0/+166
Requires software tx queueing and fast-xmit support. For good performance, drivers need frag_list support as well. This avoids the need for copying data of aggregated frames. Running without it is only supported for debugging purposes. To avoid performance and packet size issues, the rate control module or driver needs to limit the maximum A-MSDU size by setting max_rc_amsdu_len in struct ieee80211_sta. Signed-off-by: Felix Fietkau <nbd@openwrt.org> [fix locking issue] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-06mac80211: enable collecting station statistics per-CPUJohannes Berg4-46/+138
If the driver advertises the new HW flag USE_RSS, make the station statistics on the fast-rx path per-CPU. This will enable calling the RX in parallel, only hitting locking or shared cachelines when the fast-RX path isn't available. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-06mac80211: add fast-rx pathJohannes Berg7-3/+409
The regular RX path has a lot of code, but with a few assumptions on the hardware it's possible to reduce the amount of code significantly. Currently the assumptions on the driver are the following: * hardware/driver reordering buffer (if supporting aggregation) * hardware/driver decryption & PN checking (if using encryption) * hardware/driver did de-duplication * hardware/driver did A-MSDU deaggregation * AP_LINK_PS is used (in AP mode) * no client powersave handling in mac80211 (in client mode) of which some are actually checked per packet: * de-duplication * PN checking * decryption and additionally packets must * not be A-MSDU (have been deaggregated by driver/device) * be data packets * not be fragmented * be unicast * have RFC 1042 header Additionally dynamically we assume: * no encryption or CCMP/GCMP, TKIP/WEP/other not allowed * station must be authorized * 4-addr format not enabled Some data needed for the RX path is cached in a new per-station "fast_rx" structure, so that we only need to look at this and the packet, no other memory when processing packets on the fast RX path. After doing the above per-packet checks, the data path collapses down to a pretty simple conversion function taking advantage of the data cached in the small fast_rx struct. This should speed up the RX processing, and will make it easier to reason about parallelizing RX (for which statistics will need to be per-CPU still.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-06mac80211: fix RX u64 stats consistency on 32-bit platformsJohannes Berg3-29/+54
On 32-bit platforms, the 64-bit counters we keep need to be protected to be consistently read. Use the u64_stats_sync mechanism to do that. In order to not end up with overly long lines, refactor the tidstats assignments a bit. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-06mac80211: fix last RX rate data consistencyJohannes Berg3-49/+77
When storing the last_rate_* values in the RX code, there's nothing to guarantee consistency, so a concurrent reader could see, e.g. last_rate_idx on the new value, but last_rate_flag still on the old, getting completely bogus values in the end. To fix this, I lifted the sta_stats_encode_rate() function from my old rate statistics code, which encodes the entire rate data into a single 16-bit value, avoiding the consistency issue. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-06mac80211: add separate last_ack variableJohannes Berg4-9/+24
Instead of touching the rx_stats.last_rx from the status path, introduce and use a status_stats.last_ack variable. This will make rx_stats.last_rx indicate when the last frame was received, making it available for real "last_rx" and statistics gathering; statistics, when done per-CPU, will need to figure out which place was updated last for those items where the "last" value is exposed. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-06mac80211: remove rx_stats.last_rx update after sta allocJohannes Berg2-6/+0
There's no need to update rx_stats.last_rx after allocating a station since it's already updated during allocation. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-06mac80211: move averaged values out of rx_statsJohannes Berg4-10/+12
Move the averaged values out of rx_stats and into rx_stats_avg, to cleanly split them out. The averaged ones cannot be supported for parallel RX in a per-CPU fashion, while the other values can be collected per CPU and then combined/selected when needed. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-06mac80211: move semicolon out of CALL_RXH macroJohannes Berg1-17/+17
Move the semicolon, people typically assume that and once line already put a semicolon behind the "call". Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-06mac80211: count MSDUs in A-MSDU properlyJohannes Berg1-9/+9
For the RX MSDU statistics, we need to count the number of MSDUs created and accepted from an A-MSDU. Right now, all frames in any A-MSDUs were completely ignored. Fix this by moving the RX MSDU statistics accounting into the deliver function. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-06mac80211: allow passing transmitter station on RXJohannes Berg1-5/+13
Sometimes drivers already looked up, or know out-of-band from their device, which station transmitted a given RX frame. Allow them to pass the station pointer to mac80211 to save the extra lookup. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: mesh: flush paths outside of plink lockBob Copeland1-2/+9
Lockdep warned of a lock dependency between the mesh_plink lock and the internal lock for the rhashtable. The problem is that the rhashtable code uses a spin lock with softirqs enabled, while mesh_plink_timer executes a walk (to flush paths on a state change) inside a softirq with the plink lock held. This leads to the following deadlock if the timer fires while rht lock is held on this CPU, and plink lock is held on another CPU: CPU0 CPU1 ---- ---- lock(&(&ht->lock)->rlock); local_irq_disable(); lock(&(&sta->mesh->plink_lock)->rlock); lock(&(&ht->lock)->rlock); <Interrupt> lock(&(&sta->mesh->plink_lock)->rlock); *** DEADLOCK *** Fix by waiting until we drop the plink lock to flush paths. Fixes: d48a1b7cd439 ("mac80211: mesh: convert path table to rhashtable") Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: mesh: fix cleanup for mesh pathtableBob Copeland3-2/+8
The mesh path table needs to be around for the entire time the interface is in mesh mode, as users can perform an mpath dump at any time. The existing path table lifetime is instead tied to the mesh BSS which can cause crashes when different MBSSes are joined in the context of a single interface, or when the path table is dumped when no MBSS is joined. Introduce a new function to perform the final teardown of the interface and perform path table cleanup there. We already free the individual path elements when the leaving the mesh so no additional cleanup is needed there. This fixes the following crash: [ 47.753026] BUG: unable to handle kernel paging request at fffffff0 [ 47.753026] IP: [<c0239765>] kthread_data+0xa/0xe [ 47.753026] *pde = 00741067 *pte = 00000000 [ 47.753026] Oops: 0000 [#4] PREEMPT [ 47.753026] Modules linked in: ppp_generic slhc 8021q garp mrp sch_fq_codel iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat ip_tables ath9k_htc ath5k 8139too ath10k_pci ath10k_core arc4 ath9k ath9k_common ath9k_hw mac80211 ath cfg80211 cpufreq_powersave br_netfilter bridge stp llc ipw usb_wwan sierra_net usbnet af_alg natsemi via_rhine mii iTCO_wdt iTCO_vendor_support gpio_ich sierra coretemp pcspkr i2c_i801 lpc_ich ata_generic ata_piix libata ide_pci_generic piix e1000e igb i2c_algo_bit ptp pps_core [last unloaded: 8139too] [ 47.753026] CPU: 0 PID: 12 Comm: kworker/u2:1 Tainted: G D W 4.5.0-wt-V3 #6 [ 47.753026] Hardware name: To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080016 11/07/2014 [ 47.753026] task: f645a0c0 ti: f6462000 task.ti: f6462000 [ 47.753026] EIP: 0060:[<c0239765>] EFLAGS: 00010002 CPU: 0 [ 47.753026] EIP is at kthread_data+0xa/0xe [ 47.753026] EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX: 00000000 [ 47.753026] ESI: f645a0c0 EDI: f645a2fc EBP: f6463a80 ESP: f6463a78 [ 47.753026] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 [ 47.753026] CR0: 8005003b CR2: 00000014 CR3: 353e5000 CR4: 00000690 [ 47.753026] Stack: [ 47.753026] c0236866 00000000 f6463aac c05768b4 00000009 f6463ba8 f6463ab0 c0247010 [ 47.753026] 00000000 f645a0c0 f6464000 00000009 f6463ba8 f6463ab8 c0576eb2 f645a0c0 [ 47.753026] f6463aec c0228be4 c06335a4 f6463adc f6463ad0 c06c06d4 f6463ae4 c02471b0 [ 47.753026] Call Trace: [ 47.753026] [<c0236866>] ? wq_worker_sleeping+0xb/0x78 [ 47.753026] [<c05768b4>] __schedule+0xda/0x587 [ 47.753026] [<c0247010>] ? vprintk_default+0x12/0x14 [ 47.753026] [<c0576eb2>] schedule+0x72/0x89 [ 47.753026] [<c0228be4>] do_exit+0xb8/0x71d [ 47.753026] [<c02471b0>] ? kmsg_dump+0xa9/0xae [ 47.753026] [<c0203576>] oops_end+0x69/0x70 [ 47.753026] [<c021dcdb>] no_context+0x1bb/0x1c5 [ 47.753026] [<c021de1b>] __bad_area_nosemaphore+0x136/0x140 [ 47.753026] [<c021e2ef>] ? vmalloc_sync_all+0x19a/0x19a [ 47.753026] [<c021de32>] bad_area_nosemaphore+0xd/0x10 [ 47.753026] [<c021e0a1>] __do_page_fault+0x26c/0x320 [ 47.753026] [<c021e2ef>] ? vmalloc_sync_all+0x19a/0x19a [ 47.753026] [<c021e2fa>] do_page_fault+0xb/0xd [ 47.753026] [<c05798f8>] error_code+0x58/0x60 [ 47.753026] [<c021e2ef>] ? vmalloc_sync_all+0x19a/0x19a [ 47.753026] [<c0239765>] ? kthread_data+0xa/0xe [ 47.753026] [<c0236866>] ? wq_worker_sleeping+0xb/0x78 [ 47.753026] [<c05768b4>] __schedule+0xda/0x587 [ 47.753026] [<c0247010>] ? vprintk_default+0x12/0x14 [ 47.753026] [<c0576eb2>] schedule+0x72/0x89 [ 47.753026] [<c0228be4>] do_exit+0xb8/0x71d [ 47.753026] [<c02471b0>] ? kmsg_dump+0xa9/0xae [ 47.753026] [<c0203576>] oops_end+0x69/0x70 [ 47.753026] [<c021dcdb>] no_context+0x1bb/0x1c5 [ 47.753026] [<c021de1b>] __bad_area_nosemaphore+0x136/0x140 [ 47.753026] [<c021e2ef>] ? vmalloc_sync_all+0x19a/0x19a [ 47.753026] [<c021de32>] bad_area_nosemaphore+0xd/0x10 [ 47.753026] [<c021e0a1>] __do_page_fault+0x26c/0x320 [ 47.753026] [<c021e2ef>] ? vmalloc_sync_all+0x19a/0x19a [ 47.753026] [<c021e2fa>] do_page_fault+0xb/0xd [ 47.753026] [<c05798f8>] error_code+0x58/0x60 [ 47.753026] [<c021e2ef>] ? vmalloc_sync_all+0x19a/0x19a [ 47.753026] [<c0239765>] ? kthread_data+0xa/0xe [ 47.753026] [<c0236866>] ? wq_worker_sleeping+0xb/0x78 [ 47.753026] [<c05768b4>] __schedule+0xda/0x587 [ 47.753026] [<c0391e32>] ? put_io_context_active+0x6d/0x95 [ 47.753026] [<c0576eb2>] schedule+0x72/0x89 [ 47.753026] [<c02291f8>] do_exit+0x6cc/0x71d [ 47.753026] [<c0203576>] oops_end+0x69/0x70 [ 47.753026] [<c021dcdb>] no_context+0x1bb/0x1c5 [ 47.753026] [<c021de1b>] __bad_area_nosemaphore+0x136/0x140 [ 47.753026] [<c021e2ef>] ? vmalloc_sync_all+0x19a/0x19a [ 47.753026] [<c021de32>] bad_area_nosemaphore+0xd/0x10 [ 47.753026] [<c021e0a1>] __do_page_fault+0x26c/0x320 [ 47.753026] [<c03b9160>] ? debug_smp_processor_id+0x12/0x16 [ 47.753026] [<c02015e2>] ? __switch_to+0x24/0x40e [ 47.753026] [<c021e2ef>] ? vmalloc_sync_all+0x19a/0x19a [ 47.753026] [<c021e2fa>] do_page_fault+0xb/0xd [ 47.753026] [<c05798f8>] error_code+0x58/0x60 [ 47.753026] [<c021e2ef>] ? vmalloc_sync_all+0x19a/0x19a [ 47.753026] [<c03b59d2>] ? rhashtable_walk_init+0x5c/0x93 [ 47.753026] [<f9843221>] mesh_path_tbl_expire.isra.24+0x19/0x82 [mac80211] [ 47.753026] [<f984408b>] mesh_path_expire+0x11/0x1f [mac80211] [ 47.753026] [<f9842bb7>] ieee80211_mesh_work+0x73/0x1a9 [mac80211] [ 47.753026] [<f98207d1>] ieee80211_iface_work+0x2ff/0x311 [mac80211] [ 47.753026] [<c0235fa3>] process_one_work+0x14b/0x24e [ 47.753026] [<c0236313>] worker_thread+0x249/0x343 [ 47.753026] [<c02360ca>] ? process_scheduled_works+0x24/0x24 [ 47.753026] [<c0239359>] kthread+0x9e/0xa3 [ 47.753026] [<c0578e50>] ret_from_kernel_thread+0x20/0x40 [ 47.753026] [<c02392bb>] ? kthread_parkme+0x18/0x18 [ 47.753026] Code: 6b c0 85 c0 75 05 e8 fb 74 fc ff 89 f8 84 c0 75 08 8d 45 e8 e8 34 dd 33 00 83 c4 28 5b 5e 5f 5d c3 55 8b 80 10 02 00 00 89 e5 5d <8b> 40 f0 c3 55 b9 04 00 00 00 89 e5 52 8b 90 10 02 00 00 8d 45 [ 47.753026] EIP: [<c0239765>] kthread_data+0xa/0xe SS:ESP 0068:f6463a78 [ 47.753026] CR2: 00000000fffffff0 [ 47.753026] ---[ end trace 867ca0bdd0767790 ]--- Fixes: 3b302ada7f0a ("mac80211: mesh: move path tables into if_mesh") Reported-by: Fred Veldini <fred.veldini@gmail.com> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: mesh: fix mesh path kerneldocBob Copeland1-8/+12
Several of the mesh path fields are undocumented and some of the documentation is no longer correct or relevant after the switch to rhashtable. Clean up the kernel doc accordingly and reorder some fields to match the structure layout. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: mesh: reorder structure membersBob Copeland1-3/+2
Reduce padding waste in struct mesh_table and struct rmc_entry by moving the smaller fields to the end. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: mesh: embed gates hlist head directlyBob Copeland2-15/+5
Since we have converted the mesh path tables to rhashtable, we are no longer swapping out the entire mesh_pathtbl pointer with RCU. As a result, we no longer need indirection to the hlist head for the gates list and can simply embed it, saving a pair of pointer-sized allocations. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: mesh: use hlist for rmc cacheBob Copeland2-10/+12
The RMC cache has 256 list heads plus a u32, which puts it at the unfortunate size of 4104 bytes with padding. kmalloc() will then round this up to the next power-of-two, so we wind up actually using two pages here where most of the second is wasted. Switch to hlist heads here to reduce the structure size down to fit within a page. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: mesh: handle failed alloc for rmc cacheBob Copeland1-0/+3
In the unlikely case that mesh_rmc_init() fails with -ENOMEM, the rmc pointer will be left as NULL but the interface is still operational because ieee80211_mesh_init_sdata() is not allowed to fail. If this happens, we would blindly dereference rmc when checking whether a multicast frame is in the cache. Instead just drop the frames in the forwarding path. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: mesh: fix crash in mesh_path_timerBob Copeland3-15/+25
The mesh_path_reclaim() function, called from an rcu callback, cancels the mesh_path_timer associated with a mesh path. Unfortunately, this call can happen much later, perhaps after the hash table itself is destroyed. Such a situation led to the following crash in mesh_path_send_to_gates() when dereferencing the tbl pointer: [ 23.901661] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 [ 23.905516] IP: [<ffffffff814c910b>] mesh_path_send_to_gates+0x2b/0x740 [ 23.908757] PGD 99ca067 PUD 99c4067 PMD 0 [ 23.910789] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC [ 23.913485] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.5.0-rc6-wt+ #43 [ 23.916675] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014 [ 23.920471] task: ffffffff81685500 ti: ffffffff81678000 task.ti: ffffffff81678000 [ 23.922619] RIP: 0010:[<ffffffff814c910b>] [<ffffffff814c910b>] mesh_path_send_to_gates+0x2b/0x740 [ 23.925237] RSP: 0018:ffff88000b403d30 EFLAGS: 00010286 [ 23.926739] RAX: 0000000000000000 RBX: ffff880009bc0d20 RCX: 0000000000000102 [ 23.928796] RDX: 000000000000002e RSI: 0000000000000001 RDI: ffff880009bc0d20 [ 23.930895] RBP: ffff88000b403e18 R08: 0000000000000001 R09: 0000000000000001 [ 23.932917] R10: 0000000000000000 R11: 0000000000000001 R12: ffff880009c20940 [ 23.936370] R13: ffff880009bc0e70 R14: ffff880009c21c40 R15: ffff880009bc0d20 [ 23.939823] FS: 0000000000000000(0000) GS:ffff88000b400000(0000) knlGS:0000000000000000 [ 23.943688] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 23.946429] CR2: 0000000000000008 CR3: 00000000099c5000 CR4: 00000000000006b0 [ 23.949861] Stack: [ 23.950840] 000000000000002e ffff880009c20940 ffff88000b403da8 ffffffff8109e551 [ 23.954467] ffffffff82711be2 000000000000002e 0000000000000000 ffffffff8166a5f5 [ 23.958141] 0000000000685ce8 0000000000000246 ffff880009bc0d20 ffff880009c20940 [ 23.961801] Call Trace: [ 23.962987] <IRQ> [ 23.963963] [<ffffffff8109e551>] ? vprintk_emit+0x351/0x5e0 [ 23.966782] [<ffffffff8109e8ff>] ? vprintk_default+0x1f/0x30 [ 23.969529] [<ffffffff810ffa41>] ? printk+0x48/0x50 [ 23.971956] [<ffffffff814ceef3>] mesh_path_timer+0x133/0x160 [ 23.974707] [<ffffffff814cedc0>] ? mesh_nexthop_resolve+0x230/0x230 [ 23.977775] [<ffffffff810b04ee>] call_timer_fn+0xce/0x330 [ 23.980448] [<ffffffff810b0425>] ? call_timer_fn+0x5/0x330 [ 23.983126] [<ffffffff814cedc0>] ? mesh_nexthop_resolve+0x230/0x230 [ 23.986091] [<ffffffff810b097c>] run_timer_softirq+0x22c/0x390 Instead of cancelling in the RCU callback, set a new flag to prevent the timer from being rearmed, and then cancel the timer synchronously when freeing the mesh path. This leaves mesh_path_reclaim() doing nothing but kfree, so switch to kfree_rcu(). Fixes: 3b302ada7f0a ("mac80211: mesh: move path tables into if_mesh") Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: track and tell driver about GO client P2P PS abilitiesAyala Beker2-0/+33
Legacy clients don't support P2P power save mechanism, and thus if a P2P GO has a legacy client connected to it, it should disable P2P PS mechanisms. Let the driver know about this with a new bss_conf parameter. Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: avoid useless memory write on each frame RXJohannes Berg1-3/+4
In the likely case that probe_count is 0, don't write to the memory there. Also use ifmgd consistently in the function, instead of using sdata->u.mgd as well. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: fix cipher scheme function nameJohannes Berg1-4/+4
The code is only used with iwlwifi, but still should have proper mac80211 naming scheme; fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: clean up station flags debugfsJohannes Berg2-20/+47
Avoid the really strange %s%s%s expression, use an array of flag names and check that all flags are present. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: don't start dynamic PS timer if not neededJohannes Berg1-5/+5
If the device implements dynamic PS itself, there's no need to ever start the dynamic powersave timer on RX. While at it, fix up some indentation in this code. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: remove sta_info debugfs sub-structJohannes Berg3-17/+15
Since the previous patch, the struct only has a single member, so remove the struct and leave just the single member. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: Remove unused variable in per STA debugfs structMohammed Shafi Shajakhan2-3/+0
Remove unused variable in per STA debugfs structure, 'commit 34e895075e21 ("mac80211: allow station add/remove to sleep")' removed the only user of 'add_has_run'. Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: enable starting BA session with custom timeoutSara Sharon1-17/+30
Currently the debugfs entry for starting aggregation session starts it with timeout of 5 seconds. Allow opening a session with a custom timeout (according to spec 0 is no timeout). while at it, refactor the function and remove the magic numbers. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: add NETIF_F_RXCSUM to features white listSara Sharon1-1/+1
NETIF_F_RXCSUM is not in the white list, though some drivers may want to set it in order to enable seeing the actual RX checksum status in ethtool. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: Set global RRM capabilityEmmanuel Grumbach1-0/+2
Allow publishing RRM capabilities for features that are not HW dependent. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: minstrel_ht: improve sample rate skip logicFelix Fietkau1-7/+16
There were a few issues that were slowing down the process of finding the optimal rate, especially on devices with multi-rate retry limitations: When max_tp_rate[0] was slower than max_tp_rate[1], the code did not sample max_tp_rate[1], which would often allow it to switch places with max_tp_rate[0] (e.g. if only the first sampling attempts were bad, but the rate is otherwise good). Also, sample attempts of rates between max_tp_rate[0] and [1] were being ignored in this case, because the code only checked if the rate was slower than [1]. Fix this by checking against the fastest / second fastest max_tp_rate instead of assuming a specific order between the two. In my tests this patch significantly reduces the time until minstrel_ht finds the optimal rate right after assoc Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: close the SP when we enqueue frames during the SPEmmanuel Grumbach1-0/+6
Since we enqueued the frame that was supposed to be sent during the SP, and that frame may very well cary the IEEE80211_TX_STATUS_EOSP bit, we may never close the SP (WLAN_STA_SP will never be cleared). If that happens, we will not open any new SP and will never respond to any poll frame from the client. Clear WLAN_STA_SP manually if a frame that was polled during the SP is queued because of a starting A-MPDU session. The client may not see the EOSP bit, but it will at least be able to poll new frames in another SP. Reported-by: Alesya Shapira <alesya.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [remove erroneous comment] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: Fix BW upgrade for TDLS peersIlan Peer1-1/+2
It is possible that the station is connected to an AP with bandwidth of 80+80MHz or 160MHz. In such cases there is no need to perform an upgrade as the maximal supported bandwidth is 80MHz. In addition, when upgrading and setting center_freq1 and bandwidth to 80MHz also set center_freq2 to 0. Fixes: 0fabfaafec3a ("mac80211: upgrade BW of TDLS peers when possible" Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: don't send deferred frames outside the SPEmmanuel Grumbach1-3/+1
Frames that are sent between ampdu_action(IEEE80211_AMPDU_TX_START) and the move to the HT_AGG_STATE_OPERATIONAL state are buffered. If we try to start an A-MPDU session while the peer is sleeping and polling frames with U-APSD, we may have frames that will be buffered by ieee80211_tx_prep_agg. These frames have IEEE80211_TX_CTL_NO_PS_BUFFER set since they are sent to a sleeping client and possibly IEEE80211_TX_STATUS_EOSP. If the frame is buffered, we need clear these two flags since they will be re-sent after the move to HT_AGG_STATE_OPERATIONAL state which is very likely to happen after the SP ends. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: remove description of dropped memberLuis de Bethencourt1-1/+0
Commit 976bd9efdae6 ("mac80211: move beacon_loss_count into ifmgd") removed the member from the sta_info struct but the description stayed lingering. Remove it. Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: ensure no limits on station rhashtableBen Greear1-0/+1
By default, the rhashtable logic will fail to insert objects if the key-chains are too long and un-balanced. In the degenerate case where mac80211 is creating many virtual interfaces connected to the same peer(s), this case can happen. St insecure_elasticity to true to allow chains to grow as long as needed. Signed-off-by: Ben Greear <greearb@candelatech.com> [remove message, change commit message slightly] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: properly deal with station hashtable insert errorsJohannes Berg1-5/+8
The original hand-implemented hash-table in mac80211 couldn't result in insertion errors, and while converting to rhashtable I evidently forgot to check the errors. This surfaced now only because Ben is adding many identical keys and that resulted in hidden insertion errors. Cc: stable@vger.kernel.org Fixes: 7bedd0cfad4e1 ("mac80211: use rhashtable for station table") Reported-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: do not pass injected frames without a valid rate to the driverFelix Fietkau1-0/+3
Fall back to rate control if the requested bitrate was not found. Fixes: dfdfc2beb0dd ("mac80211: Parse legacy and HT rate in injected frames") Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: fix parsing of 40Mhz in injected radiotap headerSven Eckelmann1-2/+3
The MCS bandwidth part of the radiotap header is 2 bits wide. The full 2 bit have to compared against IEEE80211_RADIOTAP_MCS_BW_40 and not only if the first bit is set. Otherwise IEEE80211_RADIOTAP_MCS_BW_40 can be confused with IEEE80211_RADIOTAP_MCS_BW_20U. Fixes: dfdfc2beb0dd ("mac80211: Parse legacy and HT rate in injected frames") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: synchronize driver rx queues before removing a stationSara Sharon3-1/+35
Some devices, like iwlwifi, have RSS queues. This may cause a situation where a disassociation is handled in control path and results in station removal while there are prior RX frames that were still not processed in other queues. When they will be processed the station will be gone, and the frames will be dropped. Add a synchronization interface to avoid that. When driver returns from the synchronization mac80211 may remove the station. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-05mac80211: mesh: convert path table to rhashtableBob Copeland4-575/+259
In the time since the mesh path table was implemented as an RCU-traversable, dynamically growing hash table, a generic RCU hashtable implementation was added to the kernel. Switch the mesh path table over to rhashtable to remove some code and also gain some features like automatic shrinking. Cc: Thomas Graf <tgraf@suug.ch> Cc: netdev@vger.kernel.org Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-18 09:02:35 +0300