summaryrefslogtreecommitdiff
path: root/net/batman-adv/gateway_common.c
AgeCommit message (Collapse)AuthorFilesLines
2018-02-26batman-adv: Update copyright years for 2018Sven Eckelmann1-1/+1
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-12-21batman-adv: Convert packet.h to uapi headerSven Eckelmann1-1/+1
The header file is used by different userspace programs to inject packets or to decode sniffed packets. It should therefore be available to them as userspace header. Also other components in the kernel (like the flow dissector) require access to the packet definitions to be able to decode ETH_P_BATMAN ethernet packets. Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15batman-adv: Add kernel-doc to externally visible functionsSven Eckelmann1-0/+9
According to the kernel-doc documentation, externally visible functions should be documented. This refers to all all non-static function which can (and will) be used by functions in other sources files. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-12-15batman-adv: Use parentheses in function kernel-docSven Eckelmann1-9/+9
The documentation describing kernel-doc comments for functions ("How to format kernel-doc comments") uses parentheses at the end of the function name. Using this format allows to use a consistent style when adding documentation to a function and when referencing this function in a different kernel-doc section. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-12-15batman-adv: Add SPDX license identifier above copyright headerSven Eckelmann1-0/+1
The "Linux kernel licensing rules" require that each file has a SPDX license identifier as first line (and sometimes as second line). The FSFE REUSE practices [1] would also require the same tags but have no restrictions on the placement in the source file. Using the "Linux kernel licensing rules" is therefore also fulfilling the FSFE REUSE practices requirements at the same time. [1] https://reuse.software/practices/ Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-09-28batman-adv: Remove unnecessary parenthesesSven Eckelmann1-9/+9
checkpatch introduced with commit 63b7c73ec86b ("checkpatch: add --strict check for ifs with unnecessary parentheses") an additional test which identifies some unnecessary parentheses. Remove these unnecessary parentheses to avoid the warnings and to unify the coding style slightly more. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-03-16Merge tag 'batadv-net-for-davem-20170316' of git://git.open-mesh.org/linux-mergeDavid S. Miller1-0/+5
Simon Wunderlich says: ==================== Here are two batman-adv bugfixes: - Keep fragments equally sized, avoids some problems with too small fragments, by Sven Eckelmann - Initialize gateway class correctly when BATMAN V is compiled in, by Sven Eckelmann ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-04batman-adv: Initialize gw sel_class via batadv_algoSven Eckelmann1-0/+5
The gateway selection class variable is shared between different algorithm versions. But the interpretation of the content is algorithm specific. The initialization is therefore also algorithm specific. But this was implemented incorrectly and the initialization for BATMAN_V always overwrote the value previously written for BATMAN_IV. This could only be avoided when BATMAN_V was disabled during compile time. Using a special batadv_algo hook for this initialization avoids this problem. Fixes: 50164d8f500f ("batman-adv: B.A.T.M.A.N. V - implement GW selection logic") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-01-26batman-adv: update copyright years for 2017Sven Eckelmann1-1/+1
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-08-09batman-adv: make GW election code protocol specificAntonio Quartulli1-3/+2
Each routing protocol may have its own specific logic about gateway election which is potentially based on the metric being used. Create two GW specific API functions and move the current election logic in the B.A.T.M.A.N. IV specific code. Signed-off-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-06-30batman-adv: Consolidate logging related functionsSven Eckelmann1-0/+1
There are several places in batman-adv which provide logging related functions. These should be grouped together in the log.* files to make them easier to find. Reported-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-06-30batman-adv: split tvlv into a separate fileMarkus Pargmann1-0/+1
The tvlv functionality in main.c is mostly unrelated to the rest of the content. It still takes up a large portion of this source file (~45%, 588 lines). Moving it to a separate file makes it better visible as a main component of the batman-adv implementation and hides it less in the other helper functions in main.c Signed-off-by: Markus Pargmann <mpa@pengutronix.de> [sven@narfation.org: fix conflicts with current version, fix includes, rewrote commit message] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-06-30batman-adv: Keep includes ordered by filenameSven Eckelmann1-1/+1
It is easier to detect if a include is already there for a used functionality when the includes are ordered. Using an alphabetic order together with the grouping in commit 1e2c2a4fe4a5 ("batman-adv: Add required includes to all files") makes includes better manageable. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-06-30batman-adv: move GW mode and selection class to private data structureAntonio Quartulli1-3/+3
To reduce the field pollution in our main batadv_priv data structure we've already created some substructures so that we could group fields in a convenient manner. However gw_mode and gw_sel_class are still part of the main object. More both fields to the GW private substructure. Signed-off-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-02-29batman-adv: add throughput override attribute to hard_ifacesAntonio Quartulli1-2/+2
This attribute is exported to user space to disable the link throughput auto-detection by setting a fixed value. The throughput override value is used when batman-adv is computing the link throughput towards a neighbour. If the value is set to 0 then batman-adv will try to detect the throughput by itself. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-02-02batman-adv: update copyright years for 2016Sven Eckelmann1-1/+1
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-02batman-adv: Fix kerneldoc parsing of return descriptionSven Eckelmann1-1/+1
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-09batman-adv: Add function to convert string to batadv throughputSven Eckelmann1-68/+49
The code to convert the throughput information from a string to the batman-adv internal (100Kibit/s) representation is duplicated in batadv_parse_gw_bandwidth. Move this functionality to its own function batadv_parse_throughput to reduce the code complexity. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2015-08-25batman-adv: Fix gw_bandwidth calculation on 32 bit systemsSven Eckelmann1-7/+42
The TVLV for the gw_bandwidth stores everything as u32. But the gw_bandwidth reads the signed long which limits the maximum value to (2 ** 31 - 1) on systems with 4 byte long. Also the input value is always converted from either Mibit/s or Kibit/s to 100Kibit/s. This reduces the values even further when the user sets it via the default unit Kibit/s. It may even cause an integer overflow and end up with a value the user never intended. Instead read the values as u64, check for possible overflows, do the unit adjustments and then reduce the size to u32. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-25batman-adv: Return EINVAL on invalid gw_bandwidth changeSven Eckelmann1-2/+2
Invalid speed settings by the user are currently acknowledged as correct but not stored. Instead the return of the store operation of the file "gw_bandwidth" should indicate that the given value is not acceptable. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-25batman-adv: Remove multiple assignment per lineSven Eckelmann1-1/+4
The Linux CodingStyle disallows multiple assignments in a single line. (see chapter 1) Reported-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-25batman-adv: Replace C99 int types with kernel typeSven Eckelmann1-6/+5
(s|u)(8|16|32|64) are the preferred types in the kernel. The use of the standard C99 types u?int(8|16|32|64)_t are objected by some people and even checkpatch now warns about using them. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-06-07batman-adv: Add required includes to all filesSven Eckelmann1-1/+10
The header files could not be build indepdent from each other. This is happened because headers didn't include the files for things they've used. This was problematic because the success of a build depended on the knowledge about the right order of local includes. Also source files were not including everything they've used explicitly. Instead they required that transitive includes are always stable. This is problematic because some transitive includes are not obvious, depend on config settings and may not be stable in the future. The order for include blocks are: * primary headers (main.h and the *.h file of a *.c file) * global linux headers * required local headers * extra forward declarations for pointers in function/struct declarations The only exceptions are linux/bitops.h and linux/if_ether.h in packet.h. This header file is shared with userspace applications like batctl and must therefore build together with userspace applications. The header linux/bitops.h is not part of the uapi headers and linux/if_ether.h conflicts with the musl implementation of netinet/if_ether.h. The maintainers rejected the use of __KERNEL__ preprocessor checks and thus these two headers are only in main.h. All files using packet.h first have to include main.h to work correctly. Reported-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-05-29batman-adv: update copyright years for 2015Sven Eckelmann1-1/+1
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2014-10-14batman-adv: replace strnicmp with strncasecmpRasmus Villemoes1-4/+4
The kernel used to contain two functions for length-delimited, case-insensitive string comparison, strnicmp with correct semantics and a slightly buggy strncasecmp. The latter is the POSIX name, so strnicmp was renamed to strncasecmp, and strnicmp made into a wrapper for the new strncasecmp to avoid breaking existing users. To allow the compat wrapper strnicmp to be removed at some point in the future, and to avoid the extra indirection cost, do s/strnicmp/strncasecmp/g. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Marek Lindner <mareklindner@neomailbox.ch> Acked-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-12batman-adv: update copyright years for 2014Simon Wunderlich1-1/+1
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-01-08batman-adv: rename gw_deselect() to gw_reselect()Antonio Quartulli1-1/+1
The function batadv_gw_deselect() is actually not deselecting anything. It is just informing the GW code to perform a re-election procedure when possible. The current gateway is not being touched at all and therefore the name of this function is rather misleading. Rename it to batadv_gw_reselect() to batadv_gw_reselect() to make its behaviour easier to grasp. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2014-01-08batman-adv: remove FSF address from GPL disclaimerAntonio Quartulli1-3/+1
As suggested by checkpatch, remove all the references to the FSF address since the kernel already has one reference in its documentation. In this way it is easier to update it in case of future changes. Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2013-10-09batman-adv: tvlv - gateway download/upload bandwidth containerMarek Lindner1-83/+147
Prior to this patch batman-adv read the advertised uplink bandwidth from userspace and compressed this information into a single byte called "gateway class". Now the download & upload bandwidth information is sent as-is. No userspace change is necessary since the sysfs API always allowed to specify a bandwidth. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Spyros Gasteratos <morfeas3000@gmail.com> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-01-19batman-adv: update copyright yearsAntonio Quartulli1-1/+1
Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-07-02batman-adv: Prefix types structs with batadv_Sven Eckelmann1-1/+1
Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-28batman-adv: Prefix remaining function like macros with batadv_Sven Eckelmann1-13/+13
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-25batman-adv: Prefix gateway_common local static functions with batadv_Sven Eckelmann1-5/+5
All non-static symbols of batman-adv were prefixed with batadv_ to avoid collisions with other symbols of the kernel. Other symbols of batman-adv should use the same prefix to keep the naming scheme consistent. Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-21batman-adv: Reformat multiline comments to consistent styleSven Eckelmann1-6/+3
batman-adv doesn't follow the style for multiline comments that David S. Miller prefers. All comments should be reformatted to follow this consistent style to make the code slightly more readable. Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-21batman-adv: Prefix gateway-common non-static functions with batadv_Sven Eckelmann1-3/+4
batman-adv can be compiled as part of the kernel instead of an module. In that case the linker will see all non-static symbols of batman-adv and all other non-static symbols of the kernel. This could lead to symbol collisions. A prefix for the batman-adv symbols that defines their private namespace avoids such a problem. Reported-by: David Miller <davem@davemloft.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-21batman-adv: Prefix gateway-client non-static functions with batadv_Sven Eckelmann1-1/+1
batman-adv can be compiled as part of the kernel instead of an module. In that case the linker will see all non-static symbols of batman-adv and all other non-static symbols of the kernel. This could lead to symbol collisions. A prefix for the batman-adv symbols that defines their private namespace avoids such a problem. Reported-by: David Miller <davem@davemloft.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-18batman-adv: only store changed gw_bandwidth valuesMarek Lindner1-0/+3
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-03-11batman-adv: Ignore 80-chars per line limits for stringsSven Eckelmann1-4/+4
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-02-28batman-adv: Fix indentation of multiline statementsSven Eckelmann1-2/+2
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-02-16batman-adv: Update copyright yearsSven Eckelmann1-1/+1
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-11-20batman-adv: Replace obsolete strict_strto<foo> with kstrto<foo>Sven Eckelmann1-2/+2
strict_strto<foo> is obsolete since v3.1-rc8-8466-g14acc55 and should be replaced with kstrto<foo>. Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-06-20batman-adv: Reduce usage of charSven Eckelmann1-3/+3
char was used in different places to store information without really using the characteristics of that data type or by ignoring the fact that char has not a well defined signedness. Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-06-09batman-adv: Fix signedness problem in parse_gw_bandwidthSven Eckelmann1-2/+2
strict_strtoul as used in parse_gw_bandwidth is defined for unsigned long and strict_strtol should be used instead for long. Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-05-30batman-adv: Only use int up and down gw representationSven Eckelmann1-9/+10
It is not save to provide memory for an int and then cast the pointer to it to long*. It is better to standardize the up and down gateway bandwith representation to simple ints and only use long inside conversation routines. Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-01-31batman-adv: Update copyright yearsSven Eckelmann1-1/+1
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2010-12-17net: Add batman-adv meshing protocolSven Eckelmann1-0/+177
B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing protocol for multi-hop ad-hoc mesh networks. The networks may be wired or wireless. See http://www.open-mesh.org/ for more information and user space tools. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-29 09:52:32 +0300