summaryrefslogtreecommitdiff
path: root/kernel
AgeCommit message (Collapse)AuthorFilesLines
2008-12-29sched: make double-lock-balance fairGregory Haskins1-7/+44
double_lock balance() currently favors logically lower cpus since they often do not have to release their own lock to acquire a second lock. The result is that logically higher cpus can get starved when there is a lot of pressure on the RQs. This can result in higher latencies on higher cpu-ids. This patch makes the algorithm more fair by forcing all paths to have to release both locks before acquiring them again. Since callsites to double_lock_balance already consider it a potential preemption/reschedule point, they have the proper logic to recheck for atomicity violations. Signed-off-by: Gregory Haskins <ghaskins@novell.com>
2008-12-29sched: pull only one task during NEWIDLE balancing to limit critical sectionGregory Haskins1-1/+17
git-id c4acb2c0669c5c5c9b28e9d02a34b5c67edf7092 attempted to limit newidle critical section length by stopping after at least one task was moved. Further investigation has shown that there are other paths nested further inside the algorithm which still remain that allow long latencies to occur with newidle balancing. This patch applies the same technique inside balance_tasks() to limit the duration of this optional balancing operation. Signed-off-by: Gregory Haskins <ghaskins@novell.com> CC: Nick Piggin <npiggin@suse.de>
2008-12-29sched: only try to push a task on wakeup if it is migratableGregory Haskins1-1/+2
There is no sense in wasting time trying to push a task away that cannot move anywhere else. We gain no benefit from trying to push other tasks at this point, so if the task being woken up is non migratable, just skip the whole operation. This reduces overhead in the wakeup path for certain tasks. Signed-off-by: Gregory Haskins <ghaskins@novell.com>
2008-12-29sched: use highest_prio.next to optimize pull operationsGregory Haskins1-0/+12
We currently take the rq->lock for every cpu in an overload state during pull_rt_tasks(). However, we now have enough information via the highest_prio.[curr|next] fields to determine if there is any tasks of interest to warrant the overhead of the rq->lock, before we actually take it. So we use this information to reduce lock contention during the pull for the case where the source-rq doesnt have tasks that preempt the current task. Signed-off-by: Gregory Haskins <ghaskins@novell.com>
2008-12-29sched: use highest_prio.curr for pull thresholdGregory Haskins1-25/+6
highest_prio.curr is actually a more accurate way to keep track of the pull_rt_task() threshold since it is always up to date, even if the "next" task migrates during double_lock. Therefore, stop looking at the "next" task object and simply use the highest_prio.curr. Signed-off-by: Gregory Haskins <ghaskins@novell.com>
2008-12-29sched: track the next-highest priority on each runqueueGregory Haskins2-22/+67
We will use this later in the series to reduce the amount of rq-lock contention during a pull operation Signed-off-by: Gregory Haskins <ghaskins@novell.com>
2008-12-29sched: cleanup inc/dec_rt_tasksGregory Haskins1-24/+16
Move some common definitions up to the function prologe to simplify the body logic. Signed-off-by: Gregory Haskins <ghaskins@novell.com>
2008-12-29tracing/selftest: remove TRACE_CONT referenceIngo Molnar1-1/+0
Impact: build fix TRACE_CONT is gone - fix up the self-test too. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-29tracing/ftrace: make trace_find_cmdline() generally availableIngo Molnar1-2/+2
Impact: build fix On !CONFIG_CONTEXT_SWITCH_TRACER trace_find_cmdline() is not defined: kernel/trace/trace_output.c: In function 'trace_ctxwake_print': kernel/trace/trace_output.c:499: error: implicit declaration of function 'trace_find_cmdline' kernel/trace/trace_output.c:499: warning: assignment makes pointer from integer without a cast Move it to the generic section in trace.h. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-29tracing/branch-tracer: adapt to the stat tracing APIFrederic Weisbecker1-126/+142
Impact: refactor the branch tracer This patch adapts the branch tracer to the tracing API. This is a proof of concept because the branch tracer implements two "stat tracing" that were split in two files. So I added an option to the branch tracer: stat_all_branch. If it is set, then trace_stat will output all of the branches entries stats. Otherwise, it will print the annotated branches. Its is a kind of quick trick, waiting for a better solution. By default, the annotated branches stat are sorted by incorrect branch prediction percentage. Ie: correct incorrect % Function File Line ------- --------- - -------- ---- ---- 0 1 100 native_smp_prepare_cpus smpboot.c 1228 0 1 100 hpet_rtc_timer_reinit hpet.c 1057 0 18032 100 sched_info_queued sched_stats.h 223 0 684 100 yield_task_fair sched_fair.c 984 0 282 100 pre_schedule_rt sched_rt.c 1263 0 13414 100 sched_info_dequeued sched_stats.h 178 0 21724 100 sched_info_switch sched_stats.h 270 0 1 100 get_signal_to_deliver signal.c 1820 0 8 100 __cancel_work_timer workqueue.c 560 0 212 100 verify_export_symbols module.c 1509 0 17 100 __rmqueue_fallback page_alloc.c 793 0 43 100 clear_page_mlock internal.h 129 0 124 100 try_to_unmap_anon rmap.c 1021 0 53 100 try_to_unmap_anon rmap.c 1013 0 6 100 vma_address rmap.c 232 0 3301 100 try_to_unmap_file rmap.c 1082 0 466 100 try_to_unmap_file rmap.c 1077 0 1 100 mem_cgroup_create memcontrol.c 1090 0 3 100 inotify_find_update_watch inotify.c 726 2 30163 99 perf_counter_task_sched_out perf_counter.c 385 1 2935 99 percpu_free allocpercpu.c 138 1544 297672 99 dentry_lru_del_init dcache.c 153 8 1074 99 input_pass_event input.c 86 1390 76781 98 mapping_unevictable pagemap.h 50 280 6665 95 pick_next_task_rt sched_rt.c 889 750 4826 86 next_pidmap pid.c 194 2 8 80 blocking_notifier_chain_regist notifier.c 220 36 130 78 ioremap_pte_range ioremap.c 22 1093 3247 74 IS_ERR err.h 34 1023 2908 73 sched_slice sched_fair.c 445 22 60 73 disk_put_part genhd.h 206 [...] It enables a developer to quickly address the source of incorrect branch predictions. Note that this sorting would be better with a second sort on the number of incorrect predictions. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-29tracing/ftrace: provide the base infrastructure for histogram tracingFrederic Weisbecker4-1/+271
Impact: extend the tracing API The goal of this patch is to normalize and make more easy the implementation of statistical (histogram) tracing. It implements a trace_stat file into the /debugfs/tracing directory where one can print a one-shot output of statistics/histogram entries. A tracer has to provide two basic iterator callbacks: stat_start() => the first entry stat_next(prev, idx) => the next one. Note that it is adapted for arrays or hash tables or lists.... since it provides a pointer to the previous entry and the current index of the iterator. These two callbacks are called to get a snapshot of the statistics at each opening of the trace_stat file because. The values are so updated between two "cat trace_stat". And the tracer is free to lock its datas during the iteration to keep consistent values. Since it is almost always interesting to sort statisticals values to address the problems by priority, this infrastructure provides a "sorting" of the stat entries too if desired. A tracer has just to provide a stat_cmp callback to compare two entries and the stat tracing infrastructure will build a sorted list of the given entries. A last callback, called stat_headers, can be implemented by a tracer to output headers on its trace. If one of these callbacks is changed on runtime, it just have to signal it to the stat tracing API by calling the init_tracer_stat() helper. Changes in V2: - Fix a memory leak if the user opens multiple times the trace_stat file without closing it. Now we always free our list before rebuilding it. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-29ftrace: change trace.c to use registered eventsSteven Rostedt4-364/+574
Impact: rework trace.c to use new event register API Almost every ftrace event has to implement its output display in trace.c through a different function. Some events did not handle all the formats (trace, latency-trace, raw, hex, binary), and this method does not scale well. This patch converts the format functions to use the event API to find the event and and print its format. Currently, we have a print function for trace, latency_trace, raw, hex and binary. A trace_nop_print is available if the event wants to avoid output on a particular format. Perhaps other tracers could use this in the future (like mmiotrace and function_graph). Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-29ftrace: set up trace event hash infrastructureSteven Rostedt10-281/+416
Impact: simplify/generalize/refactor trace.c The trace.c file is becoming more difficult to maintain due to the growing number of events. There is several formats that an event may be printed. This patch sets up the infrastructure of an event hash to allow for events to register how they should be printed. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-29ftrace: remove obsolete print continue functionalitySteven Rostedt4-74/+0
Impact: cleanup, remove obsolete code Now that the ring buffer used by ftrace allows for variable length entries, we do not need the 'cont' feature of the buffer. This code makes other parts of ftrace more complex and by removing this it simplifies the ftrace code. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-29genirq: check chip->ack before callingWang Chen1-2/+4
Impact: fix theoretical NULL dereference The generic irq layer doesn't know whether irq_chip has ack routine on some architectures or not. Upon that, before calling chip->ack, we should check that it's not NULL. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-29sparseirq: move __weak symbols into separate compilation unitYinghai Lu2-9/+20
GCC has a bug with __weak alias functions: if the functions are in the same compilation unit as their call site, GCC can decide to inline them - and thus rob the linker of the opportunity to override the weak alias with the real thing. So move all the IRQ handling related __weak symbols to kernel/irq/chip.c. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-29Merge branches 'tracing/docs', 'tracing/function-graph-tracer' and 'linus' ↵Ingo Molnar32-983/+1747
into tracing/core
2008-12-29Merge branch 'linus' into timers/hrtimersIngo Molnar59-1986/+6536
Conflicts: sound/drivers/pcsp/pcsp.c Semantic conflict: sound/core/hrtimer.c
2008-12-29Merge branch 'linus' into perfcounters/coreIngo Molnar61-1995/+6549
Conflicts: fs/exec.c include/linux/init_task.h Simple context conflicts.
2008-12-29aio: make the lookup_ioctx() locklessJens Axboe1-2/+2
The mm->ioctx_list is currently protected by a reader-writer lock, so we always grab that lock on the read side for doing ioctx lookups. As the workload is extremely reader biased, turn this into an rcu hlist so we can make lookup_ioctx() lockless. Get rid of the rwlock and use a spinlock for providing update side exclusion. There's usually only 1 entry on this list, so it doesn't make sense to look into fancier data structures. Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-29Do not free io context when taking recursive faults in do_exitNikanth Karthikesan1-2/+0
When taking recursive faults in do_exit, if the io_context is not null, exit_io_context() is being called. But it might decrement the refcount more than once. It is better to leave this task alone. Signed-off-by: Nikanth Karthikesan <knikanth@suse.de> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-29[XFS] Fix merge failuresLachlan McIlroy59-1991/+6539
Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: fs/xfs/linux-2.6/xfs_cred.h fs/xfs/linux-2.6/xfs_globals.h fs/xfs/linux-2.6/xfs_ioctl.c fs/xfs/xfs_vnodeops.h Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-12-29Merge branch 'master' of ↵David S. Miller68-2023/+6632
master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: arch/sparc64/kernel/idprom.c
2008-12-29sparseirq: work around __weak alias bugIngo Molnar2-5/+9
Impact: fix boot crash if the kernel is built with certain GCC versions GCC has a bug with __weak alias functions: if the functions are in the same compilation unit as their call site, GCC can decide to inline them - and thus rob the linker of the opportunity to override the weak alias with the real thing. This can lead to the boot crash reported by Kamalesh Babulal: ACPI: Core revision 20080926 Setting APIC routing to flat BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 IP: [<ffffffff8021f9a8>] add_pin_to_irq_cpu+0x14/0x74 PGD 0 Oops: 0000 [#1] SMP [...] So move the arch_init_chip_data() function from handle.c to manage.c. Reported-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-nextLinus Torvalds1-10/+6
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next: (25 commits) allow stripping of generated symbols under CONFIG_KALLSYMS_ALL kbuild: strip generated symbols from *.ko kbuild: simplify use of genksyms kernel-doc: check for extra kernel-doc notations kbuild: add headerdep used to detect inclusion cycles in header files kbuild: fix string equality testing in tags.sh kbuild: fix make tags/cscope kbuild: fix make incompatibility kbuild: remove TAR_IGNORE setlocalversion: add git-svn support setlocalversion: print correct subversion revision scripts: improve the decodecode script scripts/package: allow custom options to rpm genksyms: allow to ignore symbol checksum changes genksyms: track symbol checksum changes tags and cscope support really belongs in a shell script kconfig: fix options to check-lxdialog.sh kbuild: gen_init_cpio expands shell variables in file names remove bashisms from scripts/extract-ikconfig kbuild: teach mkmakfile to be silent ...
2008-12-28Merge branch 'sched-core-for-linus' of ↵Linus Torvalds8-204/+250
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (31 commits) sched: fix warning in fs/proc/base.c schedstat: consolidate per-task cpu runtime stats sched: use RCU variant of list traversal in for_each_leaf_rt_rq() sched, cpuacct: export percpu cpuacct cgroup stats sched, cpuacct: refactoring cpuusage_read / cpuusage_write sched: optimize update_curr() sched: fix wakeup preemption clock sched: add missing arch_update_cpu_topology() call sched: let arch_update_cpu_topology indicate if topology changed sched: idle_balance() does not call load_balance_newidle() sched: fix sd_parent_degenerate on non-numa smp machine sched: add uid information to sched_debug for CONFIG_USER_SCHED sched: move double_unlock_balance() higher sched: update comment for move_task_off_dead_cpu sched: fix inconsistency when redistribute per-cpu tg->cfs_rq shares sched/rt: removed unneeded defintion sched: add hierarchical accounting to cpu accounting controller sched: include group statistics in /proc/sched_debug sched: rename SCHED_NO_NO_OMIT_FRAME_POINTER => SCHED_OMIT_FRAME_POINTER sched: clean up SCHED_CPUMASK_ALLOC ...
2008-12-28Merge branch 'tracing-core-for-linus' of ↵Linus Torvalds35-1003/+4795
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (241 commits) sched, trace: update trace_sched_wakeup() tracing/ftrace: don't trace on early stage of a secondary cpu boot, v3 Revert "x86: disable X86_PTRACE_BTS" ring-buffer: prevent false positive warning ring-buffer: fix dangling commit race ftrace: enable format arguments checking x86, bts: memory accounting x86, bts: add fork and exit handling ftrace: introduce tracing_reset_online_cpus() helper tracing: fix warnings in kernel/trace/trace_sched_switch.c tracing: fix warning in kernel/trace/trace.c tracing/ring-buffer: remove unused ring_buffer size trace: fix task state printout ftrace: add not to regex on filtering functions trace: better use of stack_trace_enabled for boot up code trace: add a way to enable or disable the stack tracer x86: entry_64 - introduce FTRACE_ frame macro v2 tracing/ftrace: add the printk-msg-only option tracing/ftrace: use preempt_enable_no_resched_notrace in ring_buffer_time_stamp() x86, bts: correctly report invalid bts records ... Fixed up trivial conflict in scripts/recordmcount.pl due to SH bits being already partly merged by the SH merge.
2008-12-27sparseirq: fix hang with !SPARSE_IRQYinghai Lu1-0/+15
Impact: fix hang Suresh report his two sockets system only works with SPARSE_IRQ enable it turns out we miss the setting desc->irq so provide early_irq_init() even !SPARSE_IRQ to set desc->irq Reported-by: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-27sparseirq: set lock_class for legacy irq when sparse_irq is selectedYinghai Lu1-0/+1
Impact: add lockdep annotation to legacy IRQ descs Warnings resulting out of this were not seen in practice, but it's prudent to initialize the legacy descriptors to the lock class as well, symmetric to how we do it with other descriptors. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-27sparseirq: work around compiler optimizing away __weak functionsYinghai Lu1-3/+4
Impact: fix panic on null pointer with sparseirq Some GCC versions seem to inline the weak global function, when that function is empty. Work it around, by making the functions return a (dummy) integer. Signed-off-by: Yinghai <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-27perf_counter: more barrier in blank weak functionYinghai Lu1-2/+2
Impact: fix panic possible panic Some versions of GCC inline the weak global function if it's empty. Add a barrier() to work it around. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-27hrtimers: increase clock min delta threshold while interrupt hangingFrederic Weisbecker1-1/+29
Impact: avoid timer IRQ hanging slow systems While using the function graph tracer on a virtualized system, the hrtimer_interrupt can hang the system on an infinite loop. This can be caused in several situations: - the hardware is very slow and HZ is set too high - something intrusive is slowing the system down (tracing under emulation) ... and the next clock events to program are always before the current time. This patch implements a reasonable compromise: if such a situation is detected, we share the CPUs time in 1/4 to process the hrtimer interrupts. This is enough to let the system running without serious starvation. It has been successfully tested under VirtualBox with 1000 HZ and 100 HZ with function graph tracer launched. On both cases, the clock events were increased until about 25 ms periodic ticks, which means 40 HZ. So we change a hard to debug hang into a warning message and a system that still manages to limp along. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-27sparseirq: fix desc->lock initIngo Molnar2-0/+3
Impact: cleanup init_one_irq_desc() does not initialize the desc->lock properly - you cannot init a lock by memcpying some other lock on it. This happens to work right now (because irq_desc_init is never in use), but it's a dangerous construct nevertheless, so fix it. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-27sparseirq: do not printk when migrating IRQ descriptorsIngo Molnar1-5/+1
Impact: reduce printk noise There were a couple of leftover KERN_DEBUG debugging printks, remove them. Also clarify an error message. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-26cpumask: Replace cpu_coregroup_map with cpu_coregroup_maskRusty Russell1-3/+3
cpu_coregroup_map returned a cpumask_t: it's going away. (Note, the sched part of this patch won't apply meaningfully to the sched tree, but I'm posting it to show the goal). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Ingo Molnar <mingo@redhat.com>
2008-12-26sparseirq: remove duplicated arch_early_irq_init()Yinghai Lu1-4/+0
Impact: clean up We already have a weak copy of this function in init/main.c Signed-off-by: Yinghai <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-26tracing/function-graph-tracer: strip ending newlines on commentsFrederic Weisbecker1-0/+6
Impact: tracer output improvement Ending newlines are appended automatically on comments by the function graph tracer because the newline needs to be placed after the "*/" comment characters. So if the user puts an ending newline, we want to strip it. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-26irq: simplify for_each_irq_desc() usageKOSAKI Motohiro3-23/+0
Impact: cleanup all for_each_irq_desc() usage point have !desc check. then its check can move into for_each_irq_desc() macro. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-26proc: remove ifdef CONFIG_SPARSE_IRQ from stat.cKOSAKI Motohiro1-1/+1
Impact: cleanup irq_desc can be NULL when CONFIG_SPARSE_IRQ=y only. therefore, NULL checking can move into kstat_irqs_cpu() of SPARSE_IRQ version. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: "Yinghai Lu" <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-26irq: for_each_irq_desc() move to irqnr.hKOSAKI Motohiro1-2/+11
Impact: cleanup before CONFIG_SPARSE_IRQ age, for_each_irq_desc() sat in irqnr.h and could be called from generic code. CONFIG_SPARSE_IRQ breaks this assumption, but SPARSE_IRQ version for_each_irq_desc() also can move into irqnr.h easily. Also, this patch unifies CONFIG_SPARSE_IRQ and !CONFIG_SPARSE_IRQ for_each_irq_desc(). Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-26hrtimer: remove #include <linux/irq.h>KOSAKI Motohiro1-1/+0
Impact: cleanup <linux/irq.h> can be removed and should be, because: - hrtimer doesn't use any irq feature. - <linux/irq.h> shouldn't be include from generic code. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-25Merge branches 'timers/clocksource', 'timers/hpet', 'timers/hrtimers', ↵Ingo Molnar6-315/+107
'timers/nohz', 'timers/ntp', 'timers/posixtimers' and 'timers/rtc' into timers/core
2008-12-25Merge branches 'irq/sparseirq', 'irq/genirq' and 'irq/urgent'; commit ↵Ingo Molnar33-113/+551
'v2.6.28' into irq/core
2008-12-25Merge branches 'core/debugobjects', 'core/iommu', 'core/locking', ↵Ingo Molnar13-76/+1927
'core/printk', 'core/rcu', 'core/resources', 'core/softirq' and 'core/stacktrace' into core/core
2008-12-25Merge branch 'core/futexes' into core/coreIngo Molnar1-26/+35
2008-12-25Merge branch 'core/debug' into core/coreIngo Molnar1-20/+12
2008-12-25Merge commit 'v2.6.28' into core/coreIngo Molnar26-91/+195
2008-12-25Merge branch 'sched/urgent'; commit 'v2.6.28' into sched/coreIngo Molnar4-10/+14
2008-12-25Merge branches 'tracing/ftrace', 'tracing/hw-branch-tracing' and ↵Ingo Molnar15-73/+63
'tracing/ring-buffer'; commit 'v2.6.28' into tracing/core
2008-12-25sched, trace: update trace_sched_wakeup()Peter Zijlstra3-3/+3
Impact: extend the wakeup tracepoint with the info whether the wakeup was real Add the information needed to distinguish 'real' wakeups from 'false' wakeups. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>