summaryrefslogtreecommitdiff
path: root/kernel
AgeCommit message (Collapse)AuthorFilesLines
2009-02-26rcu: Teach RCU that idle task is not quiscent state at bootPaul E. McKenney4-4/+19
This patch fixes a bug located by Vegard Nossum with the aid of kmemcheck, updated based on review comments from Nick Piggin, Ingo Molnar, and Andrew Morton. And cleans up the variable-name and function-name language. ;-) The boot CPU runs in the context of its idle thread during boot-up. During this time, idle_cpu(0) will always return nonzero, which will fool Classic and Hierarchical RCU into deciding that a large chunk of the boot-up sequence is a big long quiescent state. This in turn causes RCU to prematurely end grace periods during this time. This patch changes the rcutree.c and rcuclassic.c rcu_check_callbacks() function to ignore the idle task as a quiescent state until the system has started up the scheduler in rest_init(), introducing a new non-API function rcu_idle_now_means_idle() to inform RCU of this transition. RCU maintains an internal rcu_idle_cpu_truthful variable to track this state, which is then used by rcu_check_callback() to determine if it should believe idle_cpu(). Because this patch has the effect of disallowing RCU grace periods during long stretches of the boot-up sequence, this patch also introduces Josh Triplett's UP-only optimization that makes synchronize_rcu() be a no-op if num_online_cpus() returns 1. This allows boot-time code that calls synchronize_rcu() to proceed normally. Note, however, that RCU callbacks registered by call_rcu() will likely queue up until later in the boot sequence. Although rcuclassic and rcutree can also use this same optimization after boot completes, rcupreempt must restrict its use of this optimization to the portion of the boot sequence before the scheduler starts up, given that an rcupreempt RCU read-side critical section may be preeempted. In addition, this patch takes Nick Piggin's suggestion to make the system_state global variable be __read_mostly. Changes since v4: o Changes the name of the introduced function and variable to be less emotional. ;-) Changes since v3: o WARN_ON(nr_context_switches() > 0) to verify that RCU switches out of boot-time mode before the first context switch, as suggested by Nick Piggin. Changes since v2: o Created rcu_blocking_is_gp() internal-to-RCU API that determines whether a call to synchronize_rcu() is itself a grace period. o The definition of rcu_blocking_is_gp() for rcuclassic and rcutree checks to see if but a single CPU is online. o The definition of rcu_blocking_is_gp() for rcupreempt checks to see both if but a single CPU is online and if the system is still in early boot. This allows rcupreempt to again work correctly if running on a single CPU after booting is complete. o Added check to rcupreempt's synchronize_sched() for there being but one online CPU. Tested all three variants both SMP and !SMP, booted fine, passed a short rcutorture test on both x86 and Power. Located-by: Vegard Nossum <vegard.nossum@gmail.com> Tested-by: Vegard Nossum <vegard.nossum@gmail.com> Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-26Merge branch 'tip/tracing/ftrace' of ↵Ingo Molnar1-2/+2
ssh://master.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/ftrace
2009-02-26Merge branches 'tracing/ftrace', 'tracing/hw-branch-tracing' and 'linus' ↵Ingo Molnar7-45/+85
into tracing/core
2009-02-26tracing: rename DEFINE_TRACE_FMT to just TRACE_FORMATSteven Rostedt1-2/+2
There's been a bit confusion to whether DEFINE/DECLARE_TRACE_FMT should be a DEFINE or a DECLARE. Ingo Molnar suggested simply calling it TRACE_FORMAT. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-25time: ntp: clean up second_overflow()Ingo Molnar1-5/+6
Impact: cleanup, no functionality changed The 'time_adj' local variable is named in a very confusing way because it almost shadows the 'time_adjust' global variable - which is used in this same function. Rename it to 'delta' - to make them stand apart more clearly. kernel/time/ntp.o: text data bss dec hex filename 2545 114 144 2803 af3 ntp.o.before 2545 114 144 2803 af3 ntp.o.after md5: 1bf0b3be564512279ba7cee299d1d2be ntp.o.before.asm 1bf0b3be564512279ba7cee299d1d2be ntp.o.after.asm Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25time: ntp: simplify ntp_tick_adj calculationsIngo Molnar1-2/+5
Impact: micro-optimization Convert the (internal) ntp_tick_adj value we store from unscaled units to scaled units. This is a constant that we never modify, so scaling it up once during bootup is enough - we dont have to do it for every adjustment step. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25time: ntp: make 64-bit constants more robustIngo Molnar1-2/+2
Impact: cleanup, no functionality changed - make PPM_SCALE an explicit s64 constant, to remove (s64) casts from usage sites. kernel/time/ntp.o: text data bss dec hex filename 2536 114 136 2786 ae2 ntp.o.before 2536 114 136 2786 ae2 ntp.o.after md5: 40a7728d1188aa18e83e21a81fa7b150 ntp.o.before.asm 40a7728d1188aa18e83e21a81fa7b150 ntp.o.after.asm Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25time: ntp: refactor do_adjtimex() some moreIngo Molnar1-25/+36
Impact: cleanup, no functionality changed Further simplify do_adjtimex(): - introduce the ntp_start_leap_timer() helper function - eliminate the goto adj_done complication Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25time: ntp: refactor do_adjtimex()Ingo Molnar1-83/+99
Impact: cleanup, no functionality changed do_adjtimex() is currently a monster function with a maze of branches. Refactor the txc->modes setting aspects of it into two new helper functions: process_adj_status() process_adjtimex_modes() kernel/time/ntp.o: text data bss dec hex filename 2512 114 136 2762 aca ntp.o.before 2512 114 136 2762 aca ntp.o.after Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25time: ntp: fix bug in ntp_update_offset() & do_adjtimex()Ingo Molnar1-1/+8
Impact: change (fix) the way the NTP PLL seconds offset is initialized/tracked Fix a bug and do a micro-optimization: When PLL is enabled we do not reset time_reftime. If the PLL was off for a long time (for example after bootup), this is arguably the wrong thing to do. We already had a hack for the common boot-time case in ntp_update_offset(), in form of: if (unlikely(time_status & STA_FREQHOLD || time_reftime == 0)) secs = 0; But the update delta should be reset later on too - not just when the PLL is enabled for the first time after bootup. So do it on !STA_PLL -> STA_PLL transitions. This changes behavior, as previously if ntpd was disabled for a long time and we restarted it, we'd run from that last update, with a very large delta. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25time: ntp: micro-optimize ntp_update_offset()Ingo Molnar1-3/+3
Impact: cleanup, no functionality changed The time_reftime update in ntp_update_offset() to xtime.tv_sec is a convoluted way of saying that we want to freeze the frequency and want the 'secs' delta to be 0. Also make this branch unlikely. This shaves off 8 bytes from the code size: text data bss dec hex filename 2504 114 136 2754 ac2 ntp.o.before 2496 114 136 2746 aba ntp.o.after Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25time: ntp: simplify ntp_update_offset_fll()Ingo Molnar1-6/+5
Impact: cleanup, no functionality changed Change ntp_update_offset_fll() to delta logic instead of absolute value logic. This eliminates 'freq_adj' from the function. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25time: ntp: refactor and clean up ntp_update_offset()Ingo Molnar1-14/+30
Impact: cleanup, no functionality changed - introduce the ntp_update_offset_fll() helper - clean up the flow and variable naming kernel/time/ntp.o: text data bss dec hex filename 2504 114 136 2754 ac2 ntp.o.before 2504 114 136 2754 ac2 ntp.o.after md5: 01f7b8e1a5472a3056f9e4ae84d46315 ntp.o.before.asm 01f7b8e1a5472a3056f9e4ae84d46315 ntp.o.after.asm Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25time: ntp: refactor up ntp_update_frequency()Ingo Molnar1-8/+5
Impact: cleanup, no functionality changed Change ntp_update_frequency() from a hard to follow code flow that uses global variables as temporaries, to a clean input+output flow. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25time: ntp: clean up ntp_update_frequency()Ingo Molnar1-9/+18
Impact: cleanup, no functionality changed Prepare a refactoring of ntp_update_frequency(). kernel/time/ntp.o: text data bss dec hex filename 2504 114 136 2754 ac2 ntp.o.before 2504 114 136 2754 ac2 ntp.o.after md5: 41f3009debc9b397d7394dd77d912f0a ntp.o.before.asm 41f3009debc9b397d7394dd77d912f0a ntp.o.after.asm Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25time: ntp: simplify the MAX_TICKADJ_SCALED definitionIngo Molnar1-2/+2
Impact: cleanup, no functionality changed There's an ugly u64 typecase in the MAX_TICKADJ_SCALED definition, this can be eliminated by making the MAX_TICKADJ constant's type 64-bit (signed). kernel/time/ntp.o: text data bss dec hex filename 2504 114 136 2754 ac2 ntp.o.before 2504 114 136 2754 ac2 ntp.o.after md5: 41f3009debc9b397d7394dd77d912f0a ntp.o.before.asm 41f3009debc9b397d7394dd77d912f0a ntp.o.after.asm Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25time: ntp: simplify the second_overflow() code flowIngo Molnar1-12/+17
Impact: cleanup, no functionality changed Instead of a hierarchy of conditions, transform them to clean gradual conditions and return's. This makes the flow easier to read and makes the purpose of the function easier to understand. kernel/time/ntp.o: text data bss dec hex filename 2552 170 168 2890 b4a ntp.o.before 2552 170 168 2890 b4a ntp.o.after md5: eae1275df0b7d6290c13f6f6f8f05c8c ntp.o.before.asm eae1275df0b7d6290c13f6f6f8f05c8c ntp.o.after.asm Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25time: ntp: clean up kernel/time/ntp.cIngo Molnar1-48/+81
Impact: cleanup, no functionality changed Make this file a bit more readable by applying a consistent coding style. No code changed: kernel/time/ntp.o: text data bss dec hex filename 2552 170 168 2890 b4a ntp.o.before 2552 170 168 2890 b4a ntp.o.after md5: eae1275df0b7d6290c13f6f6f8f05c8c ntp.o.before.asm eae1275df0b7d6290c13f6f6f8f05c8c ntp.o.after.asm Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25generic-ipi: cleanupsIngo Molnar1-76/+86
Andrew pointed out that there's some small amount of style rot in kernel/smp.c. Clean it up. Reported-by: Andrew Morton <akpm@linux-foundation.org> Cc: Nick Piggin <npiggin@suse.de> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25generic-ipi: remove CSD_FLAG_WAITPeter Zijlstra3-69/+25
Oleg noticed that we don't strictly need CSD_FLAG_WAIT, rework the code so that we can use CSD_FLAG_LOCK for both purposes. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nick Piggin <npiggin@suse.de> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25generic-ipi: remove kmalloc()Peter Zijlstra1-98/+166
Remove the use of kmalloc() from the smp_call_function_*() calls. Steven's generic-ipi patch (d7240b98: generic-ipi: use per cpu data for single cpu ipi calls) started the discussion on the use of kmalloc() in this code and fixed the smp_call_function_single(.wait=0) fallback case. In this patch we complete this by also providing means for the _many() call, which fully removes the need for kmalloc() in this code. The problem with the _many() call is that other cpus might still be observing our entry when we're done with it. It solved this by dynamically allocating data elements and RCU-freeing it. We solve it by using a single per-cpu entry which provides static storage and solves one half of the problem (avoiding referencing freed data). The other half, ensuring the queue iteration it still possible, is done by placing re-used entries at the head of the list. This means that if someone was still iterating that entry when it got moved, he will now re-visit the entries on the list he had already seen, but avoids skipping over entries like would have happened had we placed the new entry at the end. Furthermore, visiting entries twice is not a problem, since we remove our cpu from the entry's cpumask once its called. Many thanks to Oleg for his suggestions and him poking holes in my earlier attempts. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nick Piggin <npiggin@suse.de> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25tracing/core: make the read callbacks reentrantsFrederic Weisbecker2-19/+85
Now that several per-cpu files can be read or spliced at the same, we want the read/splice callbacks for tracing files to be reentrants. Until now, a single global mutex (trace_types_lock) serialized the access to tracing_read_pipe(), tracing_splice_read_pipe(), and the seq helpers. Ie: it means that if a user tries to read trace_pipe0 and trace_pipe1 at the same time, the access to the function tracing_read_pipe() is contended and one reader must wait for the other to finish its read call. The trace_type_lock mutex is mostly here to serialize the access to the global current tracer (current_trace), which can be changed concurrently. Although the iter struct keeps a private pointer to this tracer, its callbacks can be changed by another function. The method used here is to not keep anymore private reference to the tracer inside the iterator but to make a copy of it inside the iterator. Then it checks on subsequents read calls if the tracer has changed. This is not costly because the current tracer is not expected to be changed often, so we use a branch prediction for that. Moreover, we add a private mutex to the iterator (there is one iterator per file descriptor) to serialize the accesses in case of multiple consumers per file descriptor (which would be a silly idea from the user). Note that this is not to protect the ring buffer, since the ring buffer already serializes the readers accesses. This is to prevent from traces weirdness in case of concurrent consumers. But these mutexes can be dropped anyway, that would not result in any crash. Just tell me what you think about it. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25tracing/core: introduce per cpu tracing filesFrederic Weisbecker2-24/+147
Impact: split up tracing output per cpu Currently, on the tracing debugfs directory, three files are available to the user to let him extracting the trace output: - trace is an iterator through the ring-buffer. It's a reader but not a consumer It doesn't block when no more traces are available. - trace pretty similar to the former, except that it adds more informations such as prempt count, irq flag, ... - trace_pipe is a reader and a consumer, it will also block waiting for traces if necessary (heh, yes it's a pipe). The traces coming from different cpus are curretly mixed up inside these files. Sometimes it messes up the informations, sometimes it's useful, depending on what does the tracer capture. The tracing_cpumask file is useful to filter the output and select only the traces captured a custom defined set of cpus. But still it is not enough powerful to extract at the same time one trace buffer per cpu. So this patch creates a new directory: /debug/tracing/per_cpu/. Inside this directory, you will now find one trace_pipe file and one trace file per cpu. Which means if you have two cpus, you will have: trace0 trace1 trace_pipe0 trace_pipe1 And of course, reading these files will have the same effect than with the usual tracing files, except that you will only see the traces from the given cpu. The original all-in-one cpu trace file are still available on their original place. Until now, only one consumer was allowed on trace_pipe to avoid racy consuming on the ring-buffer. Now the approach changed a bit, you can have only one consumer per cpu. Which means you are allowed to read concurrently trace_pipe0 and trace_pipe1 But you can't have two readers on trace_pipe0 or trace_pipe1. Following the same logic, if there is one reader on the common trace_pipe, you can not have at the same time another reader on trace_pipe0 or in trace_pipe1. Because in trace_pipe is already a consumer in all cpu buffers in essence. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25Merge branch 'tip/tracing/ftrace' of ↵Ingo Molnar5-0/+486
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/ftrace
2009-02-25generic IPI: simplify barriers and lockingNick Piggin1-39/+44
Simplify the barriers in generic remote function call interrupt code. Firstly, just unconditionally take the lock and check the list in the generic_call_function_single_interrupt IPI handler. As we've just taken an IPI here, the chances are fairly high that there will be work on the list for us, so do the locking unconditionally. This removes the tricky lockless list_empty check and dubious barriers. The change looks bigger than it is because it is just removing an outer loop. Secondly, clarify architecture specific IPI locking rules. Generic code has no tools to impose any sane ordering on IPIs if they go outside normal cache coherency, ergo the arch code must make them appear to obey cache coherency as a "memory operation" to initiate an IPI, and a "memory operation" to receive one. This way at least they can be reasoned about in generic code, and smp_mb used to provide ordering. The combination of these two changes means that explict barriers can be taken out of queue handling for the single case -- shared data is explicitly locked, and ipi ordering must conform to that, so no barriers needed. An extra barrier is needed in the many handler, so as to ensure we load the list element after the IPI is received. Does any architecture actually *need* these barriers? For the initiator I could see it, but for the handler I would be surprised. So the other thing we could do for simplicity is just to require that, rather than just matching with cache coherency, we just require a full barrier before generating an IPI, and after receiving an IPI. In which case, the smp_mb()s can go away. But just for now, we'll be on the safe side and use the barriers (they're in the slow case anyway). Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: linux-arch@vger.kernel.org Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25tracing: remove /debug/tracing/latency_traceIngo Molnar1-5/+0
Impact: remove old debug/tracing API /debug/tracing/latency_trace is an old legacy format we kept from the old latency tracer. Remove the file for now. If there's any useful bit missing then we'll propagate any useful output bits into the /debug/tracing/trace output. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25tracing/hw-branch-tracing: convert bts-tracer mutex to a spinlockIngo Molnar1-29/+28
Impact: fix CPU hotplug lockup bts_hotcpu_handler() is called with irqs disabled, so using mutex_lock() is a no-no. All the BTS codepaths here are atomic (they do not schedule), so using a spinlock is the right solution. Cc: Markus Metzger <markus.t.metzger@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25tracing: make event directory structureSteven Rostedt2-7/+137
This patch adds the directory /debug/tracing/events/ that will contain all the registered trace points. # ls /debug/tracing/events/ sched_kthread_stop sched_process_fork sched_switch sched_kthread_stop_ret sched_process_free sched_wait_task sched_migrate_task sched_process_wait sched_wakeup sched_process_exit sched_signal_send sched_wakeup_new # ls /debug/tracing/events/sched_switch/ enable # cat /debug/tracing/events/sched_switch/enable 1 # cat /debug/tracing/set_event sched_switch Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-25tracing: add schedule events to event traceSteven Rostedt2-0/+14
This patch changes the trace/sched.h to use the DECLARE_TRACE_FMT such that they are automatically registered with the event tracer. And it also adds the tracing sched headers to kernel/trace/events.c Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-25tracing: add event trace infrastructureSteven Rostedt4-0/+342
This patch creates the event tracing infrastructure of ftrace. It will create the files: /debug/tracing/available_events /debug/tracing/set_event The available_events will list the trace points that have been registered with the event tracer. set_events will allow the user to enable or disable an event hook. example: # echo sched_wakeup > /debug/tracing/set_event Will enable the sched_wakeup event (if it is registered). # echo "!sched_wakeup" >> /debug/tracing/set_event Will disable the sched_wakeup event (and only that event). # echo > /debug/tracing/set_event Will disable all events (notice the '>') # cat /debug/tracing/available_events > /debug/tracing/set_event Will enable all registered event hooks. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-24Merge branch 'tj-percpu' of ↵Ingo Molnar3-19/+53
git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc into core/percpu Conflicts: arch/x86/include/asm/pgtable.h
2009-02-24x86, ftrace: fix section mismatch in hw-branch-tracerMarkus Metzger1-4/+3
Fix an invalid memory reference problem when cpu hotplug support is disabled and the hw-branch-tracer is set as current tracer. Initializing the tracer calls bts_trace_init() which has already been freed at this time. Reported-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Markus Metzger <markus.t.metzger@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-24Merge branch 'tracing/ftrace'; commit 'v2.6.29-rc6' into tracing/coreIngo Molnar6-12/+54
2009-02-24Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller17-79/+189
2009-02-23Merge commit 'ftrace/function-graph' into nextBenjamin Herrenschmidt1-0/+75
2009-02-22Merge branch 'linus' into x86/apicIngo Molnar17-79/+189
Conflicts: arch/x86/mach-default/setup.c Semantic conflict resolution: arch/x86/kernel/setup.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-22PM: Split up sysdev_[suspend|resume] from device_power_[down|up]Rafael J. Wysocki3-2/+24
Move the sysdev_suspend/resume from the callee to the callers, with no real change in semantics, so that we can rework the disabling of interrupts during suspend/hibernation. This is based on an earlier patch from Linus. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-22Merge branch 'tip/x86/ftrace' of ↵Ingo Molnar1-1/+32
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/ftrace Conflicts: include/linux/ftrace.h kernel/trace/ftrace.c
2009-02-22Merge branch 'hibernate'Linus Torvalds4-10/+30
* hibernate: PM: Fix suspend_console and resume_console to use only one semaphore PM: Wait for console in resume PM: Fix pm_notifiers during user mode hibernation swsusp: clean up shrink_all_zones() swsusp: dont fiddle with swappiness PM: fix build for CONFIG_PM unset PM/hibernate: fix "swap breaks after hibernation failures" PM/resume: wait for device probing to finish Consolidate driver_probe_done() loops into one place
2009-02-22PM: Fix suspend_console and resume_console to use only one semaphoreArve Hjønnevåg1-6/+9
This fixes a race where a thread acquires the console while the console is suspended, and the console is resumed before this thread releases it. In this case, the secondary console semaphore would be left locked, and the primary semaphore would be released twice. This in turn would cause the console switch on suspend or resume to hang forever. Note that suspend_console does not actually lock the console for clients that use acquire_console_sem, it only locks it for clients that use try_acquire_console_sem. If we change suspend_console to fully lock the console, then the kernel may deadlock on suspend. One client of try_acquire_console_sem is acquire_console_semaphore_for_printk, which uses it to prevent printk from using the console while it is suspended. Signed-off-by: Arve Hjønnevåg <arve@android.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Len Brown <lenb@kernel.org> Cc: Greg KH <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-22PM: Wait for console in resumeArve Hjønnevåg1-0/+6
Avoids later waking up to a blinking cursor if the device woke up and returned to sleep before the console switch happened. Signed-off-by: Brian Swetland <swetland@google.com> Signed-off-by: Arve Hjønnevåg <arve@android.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Len Brown <lenb@kernel.org> Cc: Greg KH <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-22PM: Fix pm_notifiers during user mode hibernationAndrey Borzenkov1-4/+4
Snapshot device is opened with O_RDONLY during suspend and O_WRONLY durig resume. Make sure we also call notifiers with correct parameter telling them what we are really doing. Signed-off-by: Andrey Borzenkov <arvidjaar@mail.ru> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Len Brown <lenb@kernel.org> Cc: Greg KH <gregkh@suse.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-22PM: fix build for CONFIG_PM unsetRafael J. Wysocki2-1/+2
Compilation of kprobes.c with CONFIG_PM unset is broken due to some broken config dependncies. Fix that. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Len Brown <lenb@kernel.org> Cc: Greg KH <gregkh@suse.de> Reported-by: Ingo Molnar <mingo@elte.hu> Tested-by: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-22PM/resume: wait for device probing to finishArjan van de Ven1-0/+11
the resume code does not currently wait for device probing to finish. Even without async function calls this is dicey and not correct, but with async function calls during the boot sequence this is going to get hit more... This patch adds the synchronization using the newly introduced helper. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Len Brown <lenb@kernel.org> Acked-by: Greg KH <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-20ftrace: break out modify loop immediately on detection of errorSteven Rostedt1-1/+4
Impact: added precaution on failure detection Break out of the modifying loop as soon as a failure is detected. This is just an added precaution found by code review and was not found by any bug chasing. Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-20ftrace: allow archs to preform pre and post process for code modificationSteven Rostedt1-0/+28
This patch creates the weak functions: ftrace_arch_code_modify_prepare and ftrace_arch_code_modify_post_process that are called before and after the stop machine is called to modify the kernel text. If the arch needs to do pre or post processing, it only needs to define these functions. [ Update: Ingo Molnar suggested using the name ftrace_arch_code_modify_* over using ftrace_arch_modify_* ] Signed-off-by: Steven Rostedt <srostedt@redhat.com>
2009-02-20Merge branch 'x86/urgent' into x86/coreIngo Molnar11-67/+135
2009-02-20tracing/function-graph-tracer: make set_graph_function file support ftrace regexFrederic Weisbecker1-18/+38
Impact: trace only functions matching a pattern The set_graph_function file let one to trace only one or several chosen functions and follow all their code flow. Currently, only a constant function name is allowed so this patch allows the ftrace_regex functions: - matches all functions that end with "name": echo *name > set_graph_function - matches all functions that begin with "name": echo name* > set_graph_function - matches all functions that contains "name": echo *name* > set_graph_function Example: echo mutex* > set_graph_function 0) | mutex_lock_nested() { 0) 0.563 us | __might_sleep(); 0) 2.072 us | } 0) | mutex_unlock() { 0) 1.036 us | __mutex_unlock_slowpath(); 0) 2.433 us | } 0) | mutex_unlock() { 0) 0.691 us | __mutex_unlock_slowpath(); 0) 1.787 us | } 0) | mutex_lock_interruptible_nested() { 0) 0.548 us | __might_sleep(); 0) 1.945 us | } Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-20percpu: implement new dynamic percpu allocatorTejun Heo1-0/+31
Impact: new scalable dynamic percpu allocator which allows dynamic percpu areas to be accessed the same way as static ones Implement scalable dynamic percpu allocator which can be used for both static and dynamic percpu areas. This will allow static and dynamic areas to share faster direct access methods. This feature is optional and enabled only when CONFIG_HAVE_DYNAMIC_PER_CPU_AREA is defined by arch. Please read comment on top of mm/percpu.c for details. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org>
2009-02-20alloc_percpu: change percpu_ptr to per_cpu_ptrRusty Russell2-4/+4
Impact: cleanup There are two allocated per-cpu accessor macros with almost identical spelling. The original and far more popular is per_cpu_ptr (44 files), so change over the other 4 files. tj: kill percpu_ptr() and update UP too Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: mingo@redhat.com Cc: lenb@kernel.org Cc: cpufreq@vger.kernel.org Signed-off-by: Tejun Heo <tj@kernel.org>