| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Commit e31d28b6ab8f ("trace: Eliminate cond_resched_rcu_qs() in favor
of cond_resched()") substituted cond_resched() for the earlier call
to cond_resched_rcu_qs(). However, the new-age cond_resched() does
not do anything to help RCU-tasks grace periods because (1) RCU-tasks
is only enabled when CONFIG_PREEMPT=y and (2) cond_resched() is a
complete no-op when preemption is enabled. This situation results
in hangs when running the trace benchmarks.
A number of potential fixes were discussed on LKML
(https://lkml.kernel.org/r/20180224151240.0d63a059@vmware.local.home),
including making cond_resched() not be a no-op; making cond_resched()
not be a no-op, but only when running tracing benchmarks; reverting
the aforementioned commit (which works because cond_resched_rcu_qs()
does provide an RCU-tasks quiescent state; and adding a call to the
scheduler/RCU rcu_note_voluntary_context_switch() function. All were
deemed unsatisfactory, either due to added cond_resched() overhead or
due to magic functions inviting cargo culting.
This commit renames cond_resched_rcu_qs() to cond_resched_tasks_rcu_qs(),
which provides a clear hint as to what this function is doing and
why and where it should be used, and then replaces the call to
cond_resched() with cond_resched_tasks_rcu_qs() in the trace benchmark's
benchmark_event_kthread() function.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
|
|
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
The purpose of torture_runnable is to allow rcutorture and locktorture
to be started and stopped via sysfs when they are built into the kernel
(as in not compiled as loadable modules). However, the 0444 permissions
for both instances of torture_runnable prevent this use case from ever
being put into practice. Given that there have been no complaints
about this deficiency, it is reasonable to conclude that no one actually
makes use of this sysfs capability. The perf_runnable module parameter
for rcuperf is in the same situation.
This commit therefore removes both torture_runnable instances as well
as perf_runnable.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
The stutter_wait() function repeatedly fetched stutter_pause_test, and
should really just fetch it once on each pass. The races should be
harmless, but why have the races? Also, the whole point of the value
"2" for stutter_pause_test is to get everyone to start at very nearly
the same time, but the value "2" was the first jiffy of the stutter
rather than the last jiffy of the stutter.
This commit rearranges the code to be more sensible.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
The torture_shutdown() function directly invokes ftrace_dump(), which
can result in RCU CPU stall warnings when the ftrace buffer is large,
which it usually is. This commit therefore invoks rcu_ftrace_dump()
in place of ftrace_dump(), suppressing RCU CPU stall warnings during
this time.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
The torture status line contains a series of values preceded by "onoff:".
The last value in that line, the one preceding the "HZ=" string, is
always zero. The reason that it is always zero is that torture_offline()
was incrementing the sum_offl pointer instead of the value that this
pointer referenced. This commit therefore makes this increment operate
on the statistic rather than the pointer to the statistic.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
<linux/sched/clock.h>
We are going to split <linux/sched/clock.h> out of <linux/sched.h>, which
will have to be picked up from other headers and .c files.
Create a trivial placeholder <linux/sched/clock.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Fix typos and add the following to the scripts/spelling.txt:
varible||variable
While we are here, tidy up the comment blocks that fit in a single line
for drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c and
net/sctp/transport.c.
Link: http://lkml.kernel.org/r/1481573103-11329-11-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Upcoming changes to the timer wheel introduce significant inaccuracy
and possibly also an ultimate limit on timeout duration. This is a
problem for the current implementation of torture_shutdown() because
(1) shutdown times are user-specified, and can therefore be quite long,
and (2) the torture scripting will kill a test instance that runs for
more than a few minutes longer than scheduled. This commit therefore
converts the torture_shutdown() timed waits to an hrtimer, thus avoiding
too-short torture test runs as well as death by scripting.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
|
|
If the whole system has only one cpu, that cpu won't be able to be
offlined, so there is no need onoff task is stil running.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
This commit breaks torture_online() and torture_offline() out of
torture_onoff() in preparation for allowing waketorture finer-grained
control of its CPU-hotplug workload.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
When running from the scripts, rcutorture is completely headless,
so there is no way to to manually dump the trace buffer. This commit
therefore unconditionally dumps the trace buffer upon timed shutdown.
However, if you are using rmmod to end the test, it is still up to you
to manually dump the trace buffer.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
This commit clarifies error messages -- you only get to run one torture
test at a time!
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
This commit moves cond_resched_rcu_qs() into stutter_wait(), saving
a line and also avoiding RCU CPU stall warnings from all torture
loops containing a stutter_wait().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
This commit moves from the old ACCESS_ONCE() API to the new READ_ONCE()
and WRITE_ONCE() APIs.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Updated to include kernel/torture.c as suggested by Jason Low. ]
|
|
When performing module cleanups by calling torture_cleanup() the
'torture_type' string in nullified However, callers are not necessarily
done, and might still need to reference the variable. This impacts
both rcutorture and locktorture, causing printing things like:
[ 94.226618] (null)-torture: Stopping lock_torture_writer task
[ 94.226624] (null)-torture: Stopping lock_torture_stats task
Thus delay this operation until the very end of the cleanup process.
The consequence (which shouldn't matter for this kid of program) is,
of course, that we delay the window between rmmod and modprobing,
for instance in module_torture_begin().
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
User pr_alert/pr_cont for printing the logs from rcutorture module directly
instead of writing it to a buffer and then printing it. This allows us from not
having to allocate such buffers. Also remove a resulting empty function.
I tested this using the parse-torture.sh script as follows:
$ dmesg | grep torture > log.txt
$ bash parse-torture.sh log.txt test
$
There were no warnings which means that parsing went fine.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
Since the torture-test thread creation interface does not include
format string arguments, this commit makes sure the name can never be
accidentally processed as a format string.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
Loading rcutorture as a module (as opposed to building it directly into
the kernel) results in the following splat:
[Wed Apr 16 15:29:33 2014] BUG: unable to handle kernel paging request at ffffffffa0003000
[Wed Apr 16 15:29:33 2014] IP: [<ffffffffa0003000>] 0xffffffffa0003000
[Wed Apr 16 15:29:33 2014] PGD 1c0f067 PUD 1c10063 PMD 378a6067 PTE 0
[Wed Apr 16 15:29:33 2014] Oops: 0010 [#1] SMP
[Wed Apr 16 15:29:33 2014] Modules linked in: rcutorture(+) torture
[Wed Apr 16 15:29:33 2014] CPU: 0 PID: 4257 Comm: modprobe Not tainted 3.15.0-rc1 #10
[Wed Apr 16 15:29:33 2014] Hardware name: innotek GmbH VirtualBox, BIOS VirtualBox 12/01/2006
[Wed Apr 16 15:29:33 2014] task: ffff8800db1e88d0 ti: ffff8800db25c000 task.ti: ffff8800db25c000
[Wed Apr 16 15:29:33 2014] RIP: 0010:[<ffffffffa0003000>] [<ffffffffa0003000>] 0xffffffffa0003000
[Wed Apr 16 15:29:33 2014] RSP: 0018:ffff8800db25dca0 EFLAGS: 00010282
[Wed Apr 16 15:29:33 2014] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[Wed Apr 16 15:29:33 2014] RDX: ffffffffa00090a8 RSI: 0000000000000001 RDI: ffffffffa0008337
[Wed Apr 16 15:29:33 2014] RBP: ffff8800db25dd50 R08: 0000000000000000 R09: 0000000000000000
[Wed Apr 16 15:29:33 2014] R10: ffffea000357b680 R11: ffffffff8113257a R12: ffffffffa000d000
[Wed Apr 16 15:29:33 2014] R13: ffffffffa00094c0 R14: ffffffffa0009510 R15: 0000000000000001
[Wed Apr 16 15:29:33 2014] FS: 00007fee30ce5700(0000) GS:ffff88021fc00000(0000) knlGS:0000000000000000
[Wed Apr 16 15:29:33 2014] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[Wed Apr 16 15:29:33 2014] CR2: ffffffffa0003000 CR3: 00000000d5eb1000 CR4: 00000000000006f0
[Wed Apr 16 15:29:33 2014] Stack:
[Wed Apr 16 15:29:33 2014] ffffffffa000d02c 0000000000000000 ffff88021700d400 0000000000000000
[Wed Apr 16 15:29:33 2014] ffff8800db25dd40 ffffffff81647951 ffff8802162bd000 ffff88021541846c
[Wed Apr 16 15:29:33 2014] 0000000000000000 ffffffff817dbe2d ffffffff817dbe2d 0000000000000001
[Wed Apr 16 15:29:33 2014] Call Trace:
[Wed Apr 16 15:29:33 2014] [<ffffffffa000d02c>] ? rcu_torture_init+0x2c/0x8b4 [rcutorture]
[Wed Apr 16 15:29:33 2014] [<ffffffff81647951>] ? netlink_broadcast_filtered+0x121/0x3a0
[Wed Apr 16 15:29:33 2014] [<ffffffff817dbe2d>] ? mutex_lock+0xd/0x2a
[Wed Apr 16 15:29:33 2014] [<ffffffff817dbe2d>] ? mutex_lock+0xd/0x2a
[Wed Apr 16 15:29:33 2014] [<ffffffff810e7022>] ? trace_module_notify+0x62/0x1d0
[Wed Apr 16 15:29:33 2014] [<ffffffffa000d000>] ? 0xffffffffa000cfff
[Wed Apr 16 15:29:33 2014] [<ffffffff8100034a>] do_one_initcall+0xfa/0x140
[Wed Apr 16 15:29:33 2014] [<ffffffff8106b4ce>] ? __blocking_notifier_call_chain+0x5e/0x80
[Wed Apr 16 15:29:33 2014] [<ffffffff810b3481>] load_module+0x1931/0x21b0
[Wed Apr 16 15:29:33 2014] [<ffffffff810b0330>] ? show_initstate+0x50/0x50
[Wed Apr 16 15:29:33 2014] [<ffffffff810b3d9e>] SyS_init_module+0x9e/0xc0
[Wed Apr 16 15:29:33 2014] [<ffffffff817e4c22>] system_call_fastpath+0x16/0x1b
[Wed Apr 16 15:29:33 2014] Code: Bad RIP value.
[Wed Apr 16 15:29:33 2014] RIP [<ffffffffa0003000>] 0xffffffffa0003000
[Wed Apr 16 15:29:33 2014] RSP <ffff8800db25dca0>
[Wed Apr 16 15:29:33 2014] CR2: ffffffffa0003000
[Wed Apr 16 15:29:33 2014] ---[ end trace 3e88c173037af84b ]---
This splat is due to the fact that torture_init_begin() and
torture_init_end() are both marked with __init, despite their use
at runtime. This commit therefore removes __init from both functions.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
The torture tests are designed to run in isolation, but do not enforce
this isolation. This commit therefore checks for concurrent torture
tests, and refuses to start new tests while old tests are running.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
In torture_shuffle_tasks function, the check if an all-zero mask can
be passed to set_cpus_allowed_ptr() is redundant after clearing the
shuffle_idle_cpu bit. If the mask had more than one bit set, after
clearing a bit it has at least one bit set. If the mask had only
one bit set, a check is made at the beginning, where the function
returns, as there is no need to shuffle only one cpu.
Also, this code is executed inside a critical section, delimited by
get_online_cpus(), and put_online_cpus(), preventing CPUs from leaving between
the check of num_online_cpus and the calls to set_cpus_allowed_ptr() function.
Signed-off-by: Iulia Manda <iulia.manda21@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
Currently, all stuttered kthreads block a jiffy at a time, which can
result in them starting at different times. (Note: This is not an
energy-efficiency problem unless you run torture tests in production,
in which case you have other problems!) This commit increases the
intensity of the restart event by causing kthreads to spin through the
last jiffy, restarting when they see the variable change.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
Currently, torture_kthread_stopping() prints only the name of the
kthread that is stopping, which can be unedifying. This commit therefore
adds "Stopping" to make things more evident.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
Although most torture tests will have some cleanup hook, it is possible
that one might not. This commit therefore enables graceful handling of
a NULL cleanup hook during torture-test shutdown.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
The specific torture modules (like rcutorture) need to call
torture_cleanup() in any case, so this commit makes torture_cleanup()
deal with torture_shutdown_cleanup() and torture_stutter_cleanup() so
that the specific modules don't have to deal with these details.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
Stopping of kthreads is not RCU-specific, so this commit abstracts
out torture_stop_kthread(), saving a few lines of code in the process.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
Creation of kthreads is not RCU-specific, so this commit abstracts
out torture_create_kthread(), saving a few tens of lines of code in
the process.
This change requires modifying VERBOSE_TOROUT_ERRSTRING() to take a
non-const string, so that _torture_create_kthread() can avoid an
open-coded substitute.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
Not all of the rcutorture kthreads waited for kthread_should_stop()
before returning from their top-level functions, and none of them
used torture_shutdown_absorb() properly. These problems can result in
segfaults and hangs at shutdown time, and some recent changes perturbed
timing sufficiently to make them much more probable. This commit
therefore creates a torture_kthread_stopping() function that does the
proper kthread shutdown dance in one centralized location.
Accommodate this grouping by making VERBOSE_TOROUT_STRING() capable of
taking a non-const string as its argument, which allows the new
torture_kthread_stopping() to pass its "title" argument directly to
the updated version of VERBOSE_TOROUT_STRING().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
|
A few "stealth-start rcutorture kthreads" have accumulated over the years,
so this commit adds console-log announcements (but only if the torture
tests are running verbose).
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
Because auto-shutdown of torture testing is not specific to RCU,
this commit moves the auto-shutdown function to kernel/torture.c.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
Because the fullstop variable can be accessed while it is being updated,
this commit avoids any resulting compiler mischief through use of
ACCESS_ONCE() for non-initialization accesses to this shared variable.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
Because stuttering the test load (stopping and restarting it) is useful
for non-RCU testing, this commit moves the load-stuttering functionality
to kernel/torture.c.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
Currently, rcutorture can terminate via rmmod, via self-shutdown,
via something else shutting the system down, or of course the usual
catastrophic termination. The first two get flagged, so this commit adds
a message for the third. For the fourth, your warranty is void as always.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
This commit introduces the torture_must_stop() function in order to
keep use of the fullstop variable local to kernel/torture.c. There
is also a torture_must_stop_irq() counterpart for use from RCU callbacks,
timeout handlers, and the like.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
Because handling the race between rmmod and system shutdown is not
specific to RCU, this commit abstracts torture_shutdown_notify(),
placing this code into kernel/torture.c. This change also allows
fullstop_mutex to be private to kernel/torture.c.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
This commit creates a torture_cleanup() that handles the generic
cleanup actions local to kernel/torture.c.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
This commit creates torture_init_begin() and torture_init_end() functions
to abstract locking and allow the torture_type and verbose variables
in kernel/torture.o to become static. With a bit more abstraction,
fullstop_mutex will also become static.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
Because online/offline torturing is not specific to RCU, this commit
abstracts it into the kernel/torture.c module to allow other torture
tests to use it.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
The torture_shuffle() function forces each CPU in turn to go idle
periodically in order to check for problems interacting with per-CPU
variables and with dyntick-idle mode. Because this sort of debugging
is not specific to RCU, this commit abstracts that functionality.
This in turn requires abstracting some additional infrastructure.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
|
|
Because handling races between rmmod and normal shutdown is not specific
to rcutorture, this commit renames rcutorture_shutdown_absorb() to
torture_shutdown_absorb() and pulls it out into then kernel/torture.c
module. This implies pulling the fullstop mechanism into kernel/torture.c
as well.
The exporting of fullstop and fullstop_mutex is ugly and must die.
And it does in fact die in later commits that introduce higher-level
APIs that encapsulate both of these variables.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>`
|
|
Because rcu_torture_random() will be used by the locking equivalent to
rcutorture, pull it out into its own module. This new module cannot
be separately configured, instead, use the Kconfig "select" statement
from the Kconfig options of tests depending on it.
Suggested-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
|
