summaryrefslogtreecommitdiff
path: root/kernel/sched.c
AgeCommit message (Collapse)AuthorFilesLines
2011-05-28cpuset: Fix cpuset_cpus_allowed_fallback(), don't update tsk->rt.nr_cpus_allowedKOSAKI Motohiro1-7/+12
The rule is, we have to update tsk->rt.nr_cpus_allowed if we change tsk->cpus_allowed. Otherwise RT scheduler may confuse. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/4DD4B3FA.5060901@jp.fujitsu.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-28sched: Fix ttwu() for __ARCH_WANT_INTERRUPTS_ON_CTXSWPeter Zijlstra1-9/+28
Marc reported that e4a52bcb9 (sched: Remove rq->lock from the first half of ttwu()) broke his ARM-SMP machine. Now ARM is one of the few __ARCH_WANT_INTERRUPTS_ON_CTXSW users, so that exception in the ttwu() code was suspect. Yong found that the interrupt could hit after context_switch() changes current but before it clears p->on_cpu, if that interrupt were to attempt a wake-up of p we would indeed find ourselves spinning in IRQ context. Fix this by reverting to the old behaviour for this situation and perform a full remote wake-up. Cc: Frank Rowand <frank.rowand@am.sony.com> Cc: Yong Zhang <yong.zhang0@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Reported-by: Marc Zyngier <Marc.Zyngier@arm.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-27cgroups: add per-thread subsystem callbacksBen Blum1-35/+3
Add cgroup subsystem callbacks for per-thread attachment in atomic contexts Add can_attach_task(), pre_attach(), and attach_task() as new callbacks for cgroups's subsystem interface. Unlike can_attach and attach, these are for per-thread operations, to be called potentially many times when attaching an entire threadgroup. Also, the old "bool threadgroup" interface is removed, as replaced by this. All subsystems are modified for the new interface - of note is cpuset, which requires from/to nodemasks for attach to be globally scoped (though per-cpuset would work too) to persist from its pre_attach to attach_task and attach. This is a pre-patch for cgroup-procs-writable.patch. Signed-off-by: Ben Blum <bblum@andrew.cmu.edu> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Matt Helsley <matthltc@us.ibm.com> Reviewed-by: Paul Menage <menage@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-23Merge branch 'sched-core-for-linus' of ↵Linus Torvalds1-12/+27
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Increase SCHED_LOAD_SCALE resolution sched: Introduce SCHED_POWER_SCALE to scale cpu_power calculations sched: Cleanup set_load_weight()
2011-05-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6Linus Torvalds1-1/+1
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6: (28 commits) sparc32: fix build, fix missing cpu_relax declaration SCHED_TTWU_QUEUE is not longer needed since sparc32 now implements IPI sparc32,leon: Remove unnecessary page_address calls in LEON DMA API. sparc: convert old cpumask API into new one sparc32, sun4d: Implemented SMP IPIs support for SUN4D machines sparc32, sun4m: Implemented SMP IPIs support for SUN4M machines sparc32,leon: Implemented SMP IPIs for LEON CPU sparc32: implement SMP IPIs using the generic functions sparc32,leon: SMP power down implementation sparc32,leon: added some SMP comments sparc: add {read,write}*_be routines sparc32,leon: don't rely on bootloader to mask IRQs sparc32,leon: operate on boot-cpu IRQ controller registers sparc32: always define boot_cpu_id sparc32: removed unused code, implemented by generic code sparc32: avoid build warning at mm/percpu.c:1647 sparc32: always register a PROM based early console sparc32: probe for cpu info only during startup sparc: consolidate show_cpuinfo in cpu.c sparc32,leon: implement genirq CPU affinity ...
2011-05-21SCHED_TTWU_QUEUE is not longer needed since sparc32 now implements IPIDaniel Hellstrom1-1/+1
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com> Reported-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-21Merge commit '317f394160e9beb97d19a84c39b7e5eb3d7815a8'David S. Miller1-278/+349
Conflicts: arch/sparc/kernel/smp_32.c With merge conflict help from Daniel Hellstrom. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-20sched: Increase SCHED_LOAD_SCALE resolutionNikhil Rao1-8/+20
Introduce SCHED_LOAD_RESOLUTION, which scales is added to SCHED_LOAD_SHIFT and increases the resolution of SCHED_LOAD_SCALE. This patch sets the value of SCHED_LOAD_RESOLUTION to 10, scaling up the weights for all sched entities by a factor of 1024. With this extra resolution, we can handle deeper cgroup hiearchies and the scheduler can do better shares distribution and load load balancing on larger systems (especially for low weight task groups). This does not change the existing user interface, the scaled weights are only used internally. We do not modify prio_to_weight values or inverses, but use the original weights when calculating the inverse which is used to scale execution time delta in calc_delta_mine(). This ensures we do not lose accuracy when accounting time to the sched entities. Thanks to Nikunj Dadhania for fixing an bug in c_d_m() that broken fairness. Below is some analysis of the performance costs/improvements of this patch. 1. Micro-arch performance costs: Experiment was to run Ingo's pipe_test_100k 200 times with the task pinned to one cpu. I measured instruction, cycles and stalled-cycles for the runs. See: http://thread.gmane.org/gmane.linux.kernel/1129232/focus=1129389 for more info. -tip (baseline): Performance counter stats for '/root/load-scale/pipe-test-100k' (200 runs): 964,991,769 instructions # 0.82 insns per cycle # 0.33 stalled cycles per insn # ( +- 0.05% ) 1,171,186,635 cycles # 0.000 GHz ( +- 0.08% ) 306,373,664 stalled-cycles-backend # 26.16% backend cycles idle ( +- 0.28% ) 314,933,621 stalled-cycles-frontend # 26.89% frontend cycles idle ( +- 0.34% ) 1.122405684 seconds time elapsed ( +- 0.05% ) -tip+patches: Performance counter stats for './load-scale/pipe-test-100k' (200 runs): 963,624,821 instructions # 0.82 insns per cycle # 0.33 stalled cycles per insn # ( +- 0.04% ) 1,175,215,649 cycles # 0.000 GHz ( +- 0.08% ) 315,321,126 stalled-cycles-backend # 26.83% backend cycles idle ( +- 0.28% ) 316,835,873 stalled-cycles-frontend # 26.96% frontend cycles idle ( +- 0.29% ) 1.122238659 seconds time elapsed ( +- 0.06% ) With this patch, instructions decrease by ~0.10% and cycles increase by 0.27%. This doesn't look statistically significant. The number of stalled cycles in the backend increased from 26.16% to 26.83%. This can be attributed to the shifts we do in c_d_m() and other places. The fraction of stalled cycles in the frontend remains about the same, at 26.96% compared to 26.89% in -tip. 2. Balancing low-weight task groups Test setup: run 50 tasks with random sleep/busy times (biased around 100ms) in a low weight container (with cpu.shares = 2). Measure %idle as reported by mpstat over a 10s window. -tip (baseline): 06:47:48 PM CPU %usr %nice %sys %iowait %irq %soft %steal %guest %idle intr/s 06:47:49 PM all 94.32 0.00 0.06 0.00 0.00 0.00 0.00 0.00 5.62 15888.00 06:47:50 PM all 94.57 0.00 0.62 0.00 0.00 0.00 0.00 0.00 4.81 16180.00 06:47:51 PM all 94.69 0.00 0.06 0.00 0.00 0.00 0.00 0.00 5.25 15966.00 06:47:52 PM all 95.81 0.00 0.00 0.00 0.00 0.00 0.00 0.00 4.19 16053.00 06:47:53 PM all 94.88 0.06 0.00 0.00 0.00 0.00 0.00 0.00 5.06 15984.00 06:47:54 PM all 93.31 0.00 0.00 0.00 0.00 0.00 0.00 0.00 6.69 15806.00 06:47:55 PM all 94.19 0.00 0.06 0.00 0.00 0.00 0.00 0.00 5.75 15896.00 06:47:56 PM all 92.87 0.00 0.00 0.00 0.00 0.00 0.00 0.00 7.13 15716.00 06:47:57 PM all 94.88 0.00 0.00 0.00 0.00 0.00 0.00 0.00 5.12 15982.00 06:47:58 PM all 95.44 0.00 0.00 0.00 0.00 0.00 0.00 0.00 4.56 16075.00 Average: all 94.49 0.01 0.08 0.00 0.00 0.00 0.00 0.00 5.42 15954.60 -tip+patches: 06:47:03 PM CPU %usr %nice %sys %iowait %irq %soft %steal %guest %idle intr/s 06:47:04 PM all 100.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 16630.00 06:47:05 PM all 99.69 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.31 16580.20 06:47:06 PM all 99.69 0.00 0.06 0.00 0.00 0.00 0.00 0.00 0.25 16596.00 06:47:07 PM all 99.20 0.00 0.74 0.00 0.00 0.06 0.00 0.00 0.00 17838.61 06:47:08 PM all 100.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 16540.00 06:47:09 PM all 100.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 16575.00 06:47:10 PM all 100.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 16614.00 06:47:11 PM all 99.94 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.06 16588.00 06:47:12 PM all 99.94 0.00 0.06 0.00 0.00 0.00 0.00 0.00 0.00 16593.00 06:47:13 PM all 99.94 0.00 0.06 0.00 0.00 0.00 0.00 0.00 0.00 16551.00 Average: all 99.84 0.00 0.09 0.00 0.00 0.01 0.00 0.00 0.06 16711.58 We see an improvement in idle% on the system (drops from 5.42% on -tip to 0.06% with the patches). We see an improvement in idle% on the system (drops from 5.42% on -tip to 0.06% with the patches). Signed-off-by: Nikhil Rao <ncrao@google.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Nikunj A. Dadhania <nikunj@linux.vnet.ibm.com> Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Cc: Stephan Barwolf <stephan.baerwolf@tu-ilmenau.de> Cc: Mike Galbraith <efault@gmx.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/1305754668-18792-1-git-send-email-ncrao@google.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-20sched: Introduce SCHED_POWER_SCALE to scale cpu_power calculationsNikhil Rao1-2/+2
SCHED_LOAD_SCALE is used to increase nice resolution and to scale cpu_power calculations in the scheduler. This patch introduces SCHED_POWER_SCALE and converts all uses of SCHED_LOAD_SCALE for scaling cpu_power to use SCHED_POWER_SCALE instead. This is a preparatory patch for increasing the resolution of SCHED_LOAD_SCALE, and there is no need to increase resolution for cpu_power calculations. Signed-off-by: Nikhil Rao <ncrao@google.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Nikunj A. Dadhania <nikunj@linux.vnet.ibm.com> Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Cc: Stephan Barwolf <stephan.baerwolf@tu-ilmenau.de> Cc: Mike Galbraith <efault@gmx.de> Link: http://lkml.kernel.org/r/1305738580-9924-3-git-send-email-ncrao@google.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-20sched: Cleanup set_load_weight()Nikhil Rao1-4/+7
Avoid using long repetitious names; make this simpler and nicer to read. No functional change introduced in this patch. Signed-off-by: Nikhil Rao <ncrao@google.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Nikunj A. Dadhania <nikunj@linux.vnet.ibm.com> Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Cc: Stephan Barwolf <stephan.baerwolf@tu-ilmenau.de> Cc: Mike Galbraith <efault@gmx.de> Link: http://lkml.kernel.org/r/1305738580-9924-2-git-send-email-ncrao@google.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-16sched: Fix and optimise calculation of the weight-inverseStephan Baerwolf1-3/+3
If the inverse loadweight should be zero, function "calc_delta_mine" calculates the inverse of "lw->weight" (in 32bit integer ops). This calculation is actually a little bit impure (because it is inverting something around "lw-weight"+1), especially when "lw->weight" becomes smaller. The correct inverse would be 1/lw->weight multiplied by "WMULT_CONST" for fixcomma-scaling it into integers. (So WMULT_CONST/lw->weight ...) The old, impure algorithm took two divisions for inverting lw->weight, the new, more exact one only takes one and an additional unlikely-if. Signed-off-by: Stephan Baerwolf <stephan.baerwolf@tu-ilmenau.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/n/tip-0pz0wnyalr4tk4ln11xwumdx@git.kernel.org [ This could explain some aritmetical issues for small shares but nothing concrete has been reported yet so we are not confident enough to queue this up in sched/urgent and for -stable backport. But if anyone finds this commit and sees it to fix some badness then we can certainly change our mind! ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-16sched: Avoid going ahead if ->cpus_allowed is not changedYong Zhang1-2/+4
If cpumask_equal(&p->cpus_allowed, new_mask) is true, seems there is no reason to prevent set_cpus_allowed_ptr() return directly. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Acked-by: Hillf Danton <dhillf@gmail.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20110509140705.GA2219@zhy Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-16sched, rt: Update rq clock when unthrottling of an otherwise idle CPUMike Galbraith1-3/+3
If an RT task is awakened while it's rt_rq is throttled, the time between wakeup/enqueue and unthrottle/selection may be accounted as rt_time if the CPU is idle. Set rq->skip_clock_update negative upon throttle release to tell put_prev_task() that we need a clock update. Reported-by: Thomas Giesel <skoe@directbox.com> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1304059010.7472.1.camel@marge.simson.net Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-12sched: Remove unused parameters from sched_fork() and wake_up_new_task()Samir Bellabes1-2/+2
sched_fork() and wake_up_new_task() are defined with a parameter 'unsigned long clone_flags', which is unused. This patch removes the parameters. Signed-off-by: Samir Bellabes <sam@synack.fr> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1305130685-1047-1-git-send-email-sam@synack.fr Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-06sched: Shorten the construction of the span cpu mask of sched domainHillf Danton1-3/+5
For a given node, when constructing the cpumask for its sched_domain to span, if there is no best node available after searching, further efforts could be saved, based on small change in the return value of find_next_best_node(). Signed-off-by: Hillf Danton <dhillf@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Yong Zhang <yong.zhang0@gmail.com> Link: http://lkml.kernel.org/r/BANLkTi%3DqPWxRAa6%2BdT3ohEP6Z%3D0v%2Be4EXA@mail.gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-06sched: Wrap the 'cfs_rq->nr_spread_over' field with CONFIG_SCHED_DEBUGRakib Mullick1-0/+2
cfs_rq->nr_spread_over is only used when CONFIG_SCHED_DEBUG is set. So wrap it with CONFIG_SCHED_DEBUG. Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1304528026.15681.3.camel@localhost.localdomain Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-26sched: Remove noop in alloc_rt_sched_group()Hillf Danton1-3/+0
The rq varible, though computed for each possible cpu, has nothing to do in the function, so it can be removed. This also eliminates a build warning. Signed-off-by: Hillf Danton <dhillf@gmail.com> Reviewed-by: Yong Zhang <yong.zhang0@gmail.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/BANLkTin-FfQfqW5ym1iuEmrk8s777Y1LAg@mail.gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-24sched: Get rid of lock_depthJonathan Corbet1-10/+1
Neil Brown pointed out that lock_depth somehow escaped the BKL removal work. Let's get rid of it now. Note that the perf scripting utilities still have a bunch of code for dealing with common_lock_depth in tracepoints; I have left that in place in case anybody wants to use that code with older kernels. Suggested-by: Neil Brown <neilb@suse.de> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20110422111910.456c0e84@bike.lwn.net Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-21sched: Remove obsolete comment from scheduler_tick()Rakib Mullick1-3/+0
scheduler_tick() is no longer called by fork code - this got discarded a long time ago by commit bc947631d1d532 ("sched: improve efficiency of sched_fork()"). So, remove the comment which still claims otherwise. Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/BANLkTimO4iGP0QpaHO1HHF1QOnVcQpc0cw@mail.gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-21Merge commit 'v2.6.39-rc4' into sched/coreIngo Molnar1-1/+1
Merge reason: Pick up upstream fixes. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-19sched: Fix sched_domain iterations vs. RCUPeter Zijlstra1-3/+11
Vladis Kletnieks reported a new RCU debug warning in the scheduler. Since commit dce840a08702b ("sched: Dynamically allocate sched_domain/ sched_group data-structures") the sched_domain trees are protected by RCU instead of RCU-sched. This means that we need to include rcu_read_lock() protection when we iterate them since disabling preemption doesn't suffice anymore. Reported-by: Valdis.Kletnieks@vt.edu Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1302882741.2388.241.camel@twins Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-18Merge branch 'sched/locking' into sched/coreIngo Molnar1-297/+353
Merge reason: the rq locking changes are stable, propagate them into the .40 queue. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-16block: let io_schedule() flush the plug inlineJens Axboe1-1/+1
Linus correctly observes that the most important dispatch cases are now done from kblockd, this isn't ideal for latency reasons. The original reason for switching dispatches out-of-line was to avoid too deep a stack, so by _only_ letting the "accidental" flush directly in schedule() be guarded by offload to kblockd, we should be able to get the best of both worlds. So add a blk_schedule_flush_plug() that offloads to kblockd, and only use that from the schedule() path. Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-14sched: Move the second half of ttwu() to the remote cpuPeter Zijlstra1-0/+56
Now that we've removed the rq->lock requirement from the first part of ttwu() and can compute placement without holding any rq->lock, ensure we execute the second half of ttwu() on the actual cpu we want the task to run on. This avoids having to take rq->lock and doing the task enqueue remotely, saving lots on cacheline transfers. As measured using: http://oss.oracle.com/~mason/sembench.c $ for i in /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor ; do echo performance > $i; done $ echo 4096 32000 64 128 > /proc/sys/kernel/sem $ ./sembench -t 2048 -w 1900 -o 0 unpatched: run time 30 seconds 647278 worker burns per second patched: run time 30 seconds 816715 worker burns per second Reviewed-by: Frank Rowand <frank.rowand@am.sony.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20110405152729.515897185@chello.nl
2011-04-14sched: Remove need_migrate_task()Peter Zijlstra1-16/+1
Oleg noticed that need_migrate_task() doesn't need the ->on_cpu check now that ttwu() doesn't do remote enqueues for !->on_rq && ->on_cpu, so remove the helper and replace the single instance with a direct ->on_rq test. Suggested-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Frank Rowand <frank.rowand@am.sony.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20110405152729.556674812@chello.nl Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-14sched: Restructure ttwu() some morePeter Zijlstra1-33/+58
Factor our helper functions to make the inner workings of try_to_wake_up() more obvious, this also allows for adding remote queues. Reviewed-by: Frank Rowand <frank.rowand@am.sony.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20110405152729.475848012@chello.nl
2011-04-14sched: Rename ttwu_post_activation() to ttwu_do_wakeup()Peter Zijlstra1-3/+6
The ttwu_post_activation() code does the core wakeup, it sets TASK_RUNNING and performs wakeup-preemption, so give is a more descriptive name. Reviewed-by: Frank Rowand <frank.rowand@am.sony.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20110405152729.434609705@chello.nl
2011-04-14sched: Remove rq argument from ttwu_stat()Peter Zijlstra1-3/+6
In order to call ttwu_stat() without holding rq->lock we must remove its rq argument. Since we need to change rq stats, account to the local rq instead of the task rq, this is safe since we have IRQs disabled. Reviewed-by: Frank Rowand <frank.rowand@am.sony.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20110405152729.394638826@chello.nl
2011-04-14sched: Remove rq->lock from the first half of ttwu()Peter Zijlstra1-28/+37
Currently ttwu() does two rq->lock acquisitions, once on the task's old rq, holding it over the p->state fiddling and load-balance pass. Then it drops the old rq->lock to acquire the new rq->lock. By having serialized ttwu(), p->sched_class, p->cpus_allowed with p->pi_lock, we can now drop the whole first rq->lock acquisition. The p->pi_lock serializing concurrent ttwu() calls protects p->state, which we will set to TASK_WAKING to bridge possible p->pi_lock to rq->lock gaps and serialize set_task_cpu() calls against task_rq_lock(). The p->pi_lock serialization of p->sched_class allows us to call scheduling class methods without holding the rq->lock, and the serialization of p->cpus_allowed allows us to do the load-balancing bits without races. Reviewed-by: Frank Rowand <frank.rowand@am.sony.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20110405152729.354401150@chello.nl
2011-04-14sched: Drop rq->lock from sched_exec()Peter Zijlstra1-10/+5
Since we can now call select_task_rq() and set_task_cpu() with only p->pi_lock held, and sched_exec() load-balancing has always been optimistic, drop all rq->lock usage. Oleg also noted that need_migrate_task() will always be true for current, so don't bother calling that at all. Reviewed-by: Frank Rowand <frank.rowand@am.sony.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20110405152729.314204889@chello.nl Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-14sched: Drop rq->lock from first part of wake_up_new_task()Peter Zijlstra1-14/+3
Since p->pi_lock now protects all things needed to call select_task_rq() avoid the double remote rq->lock acquisition and rely on p->pi_lock. Reviewed-by: Frank Rowand <frank.rowand@am.sony.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20110405152729.273362517@chello.nl Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-14sched: Add p->pi_lock to task_rq_lock()Peter Zijlstra1-56/+47
In order to be able to call set_task_cpu() while either holding p->pi_lock or task_rq(p)->lock we need to hold both locks in order to stabilize task_rq(). This makes task_rq_lock() acquire both locks, and have __task_rq_lock() validate that p->pi_lock is held. This increases the locking overhead for most scheduler syscalls but allows reduction of rq->lock contention for some scheduler hot paths (ttwu). Reviewed-by: Frank Rowand <frank.rowand@am.sony.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20110405152729.232781355@chello.nl Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-14sched: Also serialize ttwu_local() with p->pi_lockPeter Zijlstra1-12/+19
Since we now serialize ttwu() using p->pi_lock, we also need to serialize ttwu_local() using that, otherwise, once we drop the rq->lock from ttwu() it can race with ttwu_local(). Reviewed-by: Frank Rowand <frank.rowand@am.sony.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20110405152729.192366907@chello.nl
2011-04-14sched: Delay task_contributes_to_load()Peter Zijlstra1-12/+4
In prepratation of having to call task_contributes_to_load() without holding rq->lock, we need to store the result until we do and can update the rq accounting accordingly. Reviewed-by: Frank Rowand <frank.rowand@am.sony.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20110405152729.151523907@chello.nl
2011-04-14sched: Deal with non-atomic min_vruntime reads on 32bitsPeter Zijlstra1-0/+3
In order to avoid reading partial updated min_vruntime values on 32bit implement a seqcount like solution. Reviewed-by: Frank Rowand <frank.rowand@am.sony.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20110405152729.111378493@chello.nl Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-14sched: Remove rq argument to sched_class::task_waking()Peter Zijlstra1-1/+1
In preparation of calling this without rq->lock held, remove the dependency on the rq argument. Reviewed-by: Frank Rowand <frank.rowand@am.sony.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20110405152729.071474242@chello.nl Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-14sched: Drop the rq argument to sched_class::select_task_rq()Peter Zijlstra1-9/+11
In preparation of calling select_task_rq() without rq->lock held, drop the dependency on the rq argument. Reviewed-by: Frank Rowand <frank.rowand@am.sony.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20110405152729.031077745@chello.nl Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-14sched: Serialize p->cpus_allowed and ttwu() using p->pi_lockPeter Zijlstra1-21/+16
Currently p->pi_lock already serializes p->sched_class, also put p->cpus_allowed and try_to_wake_up() under it, this prepares the way to do the first part of ttwu() without holding rq->lock. By having p->sched_class and p->cpus_allowed serialized by p->pi_lock, we prepare the way to call select_task_rq() without holding rq->lock. Reviewed-by: Frank Rowand <frank.rowand@am.sony.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20110405152728.990364093@chello.nl Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-14sched: Provide p->on_rqPeter Zijlstra1-18/+20
Provide a generic p->on_rq because the p->se.on_rq semantics are unfavourable for lockless wakeups but needed for sched_fair. In particular, p->on_rq is only cleared when we actually dequeue the task in schedule() and not on any random dequeue as done by things like __migrate_task() and __sched_setscheduler(). This also allows us to remove p->se usage from !sched_fair code. Reviewed-by: Frank Rowand <frank.rowand@am.sony.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20110405152728.949545047@chello.nl
2011-04-14sched: Clean up ttwu() statsPeter Zijlstra1-35/+40
Collect all ttwu() stat code into a single function and ensure its always called for an actual wakeup (changing p->state to TASK_RUNNING). Reviewed-by: Frank Rowand <frank.rowand@am.sony.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20110405152728.908177058@chello.nl
2011-04-14sched: Change the ttwu() success detailsPeter Zijlstra1-9/+7
try_to_wake_up() would only return a success when it would have to place a task on a rq, change that to every time we change p->state to TASK_RUNNING, because that's the real measure of wakeups. This results in that success is always true for the tracepoints. Reviewed-by: Frank Rowand <frank.rowand@am.sony.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20110405152728.866866929@chello.nl
2011-04-14sched: Move wq_worker_waking to the correct sitePeter Zijlstra1-3/+4
wq_worker_waking_up() needs to match wq_worker_sleeping(), since the latter is only called on deactivate, move the former near activate. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/n/top-t3m7n70n9frmv4pv2n5fwmov@git.kernel.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-14mutex: Use p->on_cpu for the adaptive spinPeter Zijlstra1-50/+33
Since we now have p->on_cpu unconditionally available, use it to re-implement mutex_spin_on_owner. Requested-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frank Rowand <frank.rowand@am.sony.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20110405152728.826338173@chello.nl
2011-04-14sched: Always provide p->on_cpuPeter Zijlstra1-17/+29
Always provide p->on_cpu so that we can determine if its on a cpu without having to lock the rq. Reviewed-by: Frank Rowand <frank.rowand@am.sony.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20110405152728.785452014@chello.nl Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-13block: don't flush plugged IO on forced preemtion schedulingLinus Torvalds1-10/+10
We really only want to unplug the pending IO when the process actually goes to sleep. So move the test for flushing the plug up to the place where we actually deactivate the task - where we have properly checked for preemption and for the process really sleeping. Acked-by: Jens Axboe <jaxboe@fusionio.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-11sched: Dynamic sched_domain::levelPeter Zijlstra1-3/+6
Remove the SD_LV_ enum and use dynamic level assignments. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20110407122942.969433965@chello.nl Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-11sched: Move sched domain storage into the topology listPeter Zijlstra1-52/+77
In order to remove the last dependency on the statid domain levels, move the sd_data storage into the topology structure. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20110407122942.924926412@chello.nl Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-11sched: Reverse the topology listPeter Zijlstra1-14/+20
In order to get rid of static sched_domain::level assignments, reverse the topology iteration. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20110407122942.876506131@chello.nl Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-11sched: Unify the sched_domain build functionsPeter Zijlstra1-94/+39
Since all the __build_$DOM_sched_domain() functions do pretty much the same thing, unify them. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20110407122942.826347257@chello.nl Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-11sched: Stuff the sched_domain creation in a data-structurePeter Zijlstra1-6/+26
In order to make the topology contruction fully dynamic, remove the still hard-coded list of possible domains and stick them in a data-structure. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20110407122942.770335383@chello.nl Signed-off-by: Ingo Molnar <mingo@elte.hu>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-19 23:41:04 +0300