summaryrefslogtreecommitdiff
path: root/kernel/irq/irqdomain.c
AgeCommit message (Collapse)AuthorFilesLines
2020-05-21irqdomain: Allow software nodes for IRQ domain creationAndy Shevchenko1-1/+2
In some cases we need to have an IRQ domain created out of software node. One of such cases is DesignWare GPIO driver when it's instantiated from half-baked ACPI table (alas, we can't fix it for devices which are few years on market) and thus using software nodes to quirk this. But the driver is using IRQ domains based on per GPIO port firmware nodes, which are in the above case software ones. This brings a warning message to be printed [ 73.957183] irq: Invalid fwnode type for irqdomain and creates an anonymous IRQ domain without a debugfs entry. Allowing software nodes to be valid for IRQ domains rids us of the warning and debugs gets correctly populated. % ls -1 /sys/kernel/debug/irq/domains/ ... intel-quark-dw-apb-gpio:portA Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> [maz: refactored commit message] Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200520164927.39090-3-andriy.shevchenko@linux.intel.com
2020-05-21irqdomain: Get rid of special treatment for ACPI in __irq_domain_add()Andy Shevchenko1-16/+1
Now that __irq_domain_add() is able to better deals with generic fwnodes, there is no need to special-case ACPI anymore. Get rid of the special treatment for ACPI. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200520164927.39090-2-andriy.shevchenko@linux.intel.com
2020-05-21irqdomain: Make __irq_domain_add() less OF-dependentAndy Shevchenko1-7/+6
__irq_domain_add() relies in some places on the fact that the fwnode can be only of type OF. This prevents refactoring of the code to support other types of fwnode. Make it less OF-dependent by switching it to use the fwnode directly where it makes sense. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200520164927.39090-1-andriy.shevchenko@linux.intel.com
2020-05-18irqdomain: Make irq_domain_reset_irq_data() available to non-hierarchical usersBartosz Golaszewski1-12/+12
irq_domain_reset_irq_data() doesn't modify the parent data, so it can be made available even if irq domain hierarchy is not being built. We'll subsequently use it in irq_sim code. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20200514083901.23445-2-brgl@bgdev.pl
2020-03-08genirq/irqdomain: Check pointer in irq_domain_alloc_irqs_hierarchy()Alexander Sverdlin1-5/+5
irq_domain_alloc_irqs_hierarchy() has 3 call sites in the compilation unit but only one of them checks for the pointer which is being dereferenced inside the called function. Move the check into the function. This allows for catching the error instead of the following crash: Unable to handle kernel NULL pointer dereference at virtual address 00000000 PC is at 0x0 LR is at gpiochip_hierarchy_irq_domain_alloc+0x11f/0x140 ... [<c06c23ff>] (gpiochip_hierarchy_irq_domain_alloc) [<c0462a89>] (__irq_domain_alloc_irqs) [<c0462dad>] (irq_create_fwspec_mapping) [<c06c2251>] (gpiochip_to_irq) [<c06c1c9b>] (gpiod_to_irq) [<bf973073>] (gpio_irqs_init [gpio_irqs]) [<bf974048>] (gpio_irqs_exit+0xecc/0xe84 [gpio_irqs]) Code: bad PC value Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200306174720.82604-1-alexander.sverdlin@nokia.com
2020-03-08irqdomain: Fix function documentation of __irq_domain_alloc_fwnode()luanshi1-2/+2
The function got renamed at some point, but the kernel-doc was not updated. Signed-off-by: luanshi <zhangliguang@linux.alibaba.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/1583200125-58806-1-git-send-email-zhangliguang@linux.alibaba.com
2020-01-20irqdomain: Fix a memory leak in irq_domain_push_irq()Kevin Hao1-0/+1
Fix a memory leak reported by kmemleak: unreferenced object 0xffff000bc6f50e80 (size 128): comm "kworker/23:2", pid 201, jiffies 4294894947 (age 942.132s) hex dump (first 32 bytes): 00 00 00 00 41 00 00 00 86 c0 03 00 00 00 00 00 ....A........... 00 a0 b2 c6 0b 00 ff ff 40 51 fd 10 00 80 ff ff ........@Q...... backtrace: [<00000000e62d2240>] kmem_cache_alloc_trace+0x1a4/0x320 [<00000000279143c9>] irq_domain_push_irq+0x7c/0x188 [<00000000d9f4c154>] thunderx_gpio_probe+0x3ac/0x438 [<00000000fd09ec22>] pci_device_probe+0xe4/0x198 [<00000000d43eca75>] really_probe+0xdc/0x320 [<00000000d3ebab09>] driver_probe_device+0x5c/0xf0 [<000000005b3ecaa0>] __device_attach_driver+0x88/0xc0 [<000000004e5915f5>] bus_for_each_drv+0x7c/0xc8 [<0000000079d4db41>] __device_attach+0xe4/0x140 [<00000000883bbda9>] device_initial_probe+0x18/0x20 [<000000003be59ef6>] bus_probe_device+0x98/0xa0 [<0000000039b03d3f>] deferred_probe_work_func+0x74/0xa8 [<00000000870934ce>] process_one_work+0x1c8/0x470 [<00000000e3cce570>] worker_thread+0x1f8/0x428 [<000000005d64975e>] kthread+0xfc/0x128 [<00000000f0eaa764>] ret_from_fork+0x10/0x18 Fixes: 495c38d3001f ("irqdomain: Add irq_domain_{push,pop}_irq() functions") Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200120043547.22271-1-haokexin@gmail.com
2020-01-20genirq: Introduce irq_domain_translate_onecellYash Shah1-0/+17
Add a new function irq_domain_translate_onecell() that is to be used as the translate function in struct irq_domain_ops. Signed-off-by: Yash Shah <yash.shah@sifive.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1575976274-13487-2-git-send-email-yash.shah@sifive.com
2019-11-05irq/irqdomain: Update __irq_domain_alloc_fwnode() function documentationYi Wang1-1/+1
A recent commit changed a parameter of __irq_domain_alloc_fwnode(), but did not update the documentation comment. Fix it up. Fixes: b977fcf477c1 ("irqdomain/debugfs: Use PAs to generate fwnode names") Signed-off-by: Yi Wang <wang.yi59@zte.com.cn> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/1571476047-29463-1-git-send-email-wang.yi59@zte.com.cn
2019-09-03irqdomain: Add the missing assignment of domain->fwnode for named fwnodeDexuan Cui1-0/+1
Recently device pass-through stops working for Linux VM running on Hyper-V. git-bisect shows the regression is caused by the recent commit 467a3bb97432 ("PCI: hv: Allocate a named fwnode ..."), but the root cause is that the commit d59f6617eef0 forgets to set the domain->fwnode for IRQCHIP_FWNODE_NAMED*, and as a result: 1. The domain->fwnode remains to be NULL. 2. irq_find_matching_fwspec() returns NULL since "h->fwnode == fwnode" is false, and pci_set_bus_msi_domain() sets the Hyper-V PCI root bus's msi_domain to NULL. 3. When the device is added onto the root bus, the device's dev->msi_domain is set to NULL in pci_set_msi_domain(). 4. When a device driver tries to enable MSI-X, pci_msi_setup_msi_irqs() calls arch_setup_msi_irqs(), which uses the native MSI chip (i.e. arch/x86/kernel/apic/msi.c: pci_msi_controller) to set up the irqs, but actually pci_msi_setup_msi_irqs() is supposed to call msi_domain_alloc_irqs() with the hbus->irq_domain, which is created in hv_pcie_init_irq_domain() and is associated with the Hyper-V chip hv_msi_irq_chip. Consequently, the irq line is not properly set up, and the device driver can not receive any interrupt. Fixes: d59f6617eef0 ("genirq: Allow fwnode to carry name information only") Fixes: 467a3bb97432 ("PCI: hv: Allocate a named fwnode instead of an address-based one") Reported-by: Lili Deng <v-lide@microsoft.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/PU1P153MB01694D9AF625AC335C600C5FBFBE0@PU1P153MB0169.APCP153.PROD.OUTLOOK.COM
2019-08-07irqdomain/debugfs: Use PAs to generate fwnode namesMarc Zyngier1-4/+5
Booting a large arm64 server (HiSi D05) leads to the following shouting at boot time: [ 20.722132] debugfs: File 'irqchip@(____ptrval____)-3' in directory 'domains' already present! [ 20.730851] debugfs: File 'irqchip@(____ptrval____)-3' in directory 'domains' already present! [ 20.739560] debugfs: File 'irqchip@(____ptrval____)-3' in directory 'domains' already present! [ 20.748267] debugfs: File 'irqchip@(____ptrval____)-3' in directory 'domains' already present! [ 20.756975] debugfs: File 'irqchip@(____ptrval____)-3' in directory 'domains' already present! [ 20.765683] debugfs: File 'irqchip@(____ptrval____)-3' in directory 'domains' already present! [ 20.774391] debugfs: File 'irqchip@(____ptrval____)-3' in directory 'domains' already present! and many more... Evidently, we expect something a bit more informative than ____ptrval____, and certainly we want all of our domains, not just the first one. For that, turn the %p used to generate the fwnode name into something that won't be repainted (%pa). Given that we've now fixed all users to pass a pointer to a PA, it will actually do the right thing. Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-07-06irq/irqdomain: Fix comment typoZenghui Yu1-1/+1
Fix typo in the comment on top of __irq_domain_add(). Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/1562388072-23492-1-git-send-email-yuzenghui@huawei.com
2019-05-28genirq/irqdomain: Remove WARN_ON() on out-of-memory conditionGeert Uytterhoeven1-1/+1
There is no need to print a backtrace when memory allocation fails, as the memory allocation core already takes care of that. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/20190527115742.2693-1-geert+renesas@glider.be
2019-04-29irq/irqdomain: Fix typo in the comment on top of __irq_domain_alloc_irqs()Julien Grall1-1/+1
The word 'number' has been misspelt in the comment on top of _irq_domain_alloc_irqs(). Signed-off-by: Julien Grall <julien.grall@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-03-08Merge tag 'gpio-v5.1-1' of ↵Linus Torvalds1-11/+34
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v5.1 cycle: Core changes: - The big change this time around is the irqchip handling in the qualcomm pin controllers, closely coupled with the gpiochip. This rework, in a classic fall-between-the-chairs fashion has been sidestepped for too long. The Qualcomm IRQchips using the SPMI and SSBI transport mechanisms have been rewritten to use hierarchical irqchip. This creates the base from which I intend to gradually pull support for hierarchical irqchips into the gpiolib irqchip helpers to cut down on duplicate code. We have too many hacks in the kernel because people have been working around the missing hierarchical irqchip for years, and once it was there, noone understood it for a while. We are now slowly adapting to using it. This is why this pull requests include changes to MFD, SPMI, IRQchip core and some ARM Device Trees pertaining to the Qualcomm chip family. Since Qualcomm have so many chips and such large deployments it is paramount that this platform gets this right, and now it (hopefully) does. - Core support for pull-up and pull-down configuration, also from the device tree. When a simple GPIO chip supports an "off or on" pull-up or pull-down resistor, we provide a way to set this up using machine descriptors or device tree. If more elaborate control of pull up/down (such as resistance shunt setting) is required, drivers should be phased over to use pin control. We do not yet provide a userspace ABI for this pull up-down setting but I suspect the makers are going to ask for it soon enough. PCA953x is the first user of this new API. - The GPIO mockup driver has been revamped after some discussion improving the IRQ simulator in the process. The idea is to make it possible to use the mockup for both testing and virtual prototyping, e.g. when you do not yet have a GPIO expander to play with but really want to get something to develop code around before hardware is available. It's neat. The blackbox testing usecase is currently making its way into kernelci. - ACPI GPIO core preserves non direction flags when updating flags. - A new device core helper for devm_platform_ioremap_resource() is funneled through the GPIO tree with Greg's ACK. New drivers: - TQ-Systems QTMX86 GPIO controllers (using port-mapped I/O) - Gateworks PLD GPIO driver (vaccumed up from OpenWrt) - AMD G-Series PCH (Platform Controller Hub) GPIO driver. - Fintek F81804 & F81966 subvariants. - PCA953x now supports NXP PCAL6416. Driver improvements: - IRQ support on the Nintendo Wii (Hollywood) GPIO. - get_direction() support for the MVEBU driver. - Set the right output level on SAMA5D2. - Drop the unused irq trigger setting on the Spreadtrum driver. - Wakeup support for PCA953x. - A slew of cleanups in the various Intel drivers" * tag 'gpio-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (110 commits) gpio: gpio-omap: fix level interrupt idling gpio: amd-fch: Set proper output level for direction_output x86: apuv2: remove unused variable gpio: pca953x: Use PCA_LATCH_INT platform/x86: fix PCENGINES_APU2 Kconfig warning gpio: pca953x: Fix dereference of irq data in shutdown gpio: amd-fch: Fix type error found by sparse gpio: amd-fch: Drop const from resource gpio: mxc: add check to return defer probe if clock tree NOT ready gpio: ftgpio: Register per-instance irqchip gpio: ixp4xx: Add DT bindings x86: pcengines apuv2 gpio/leds/keys platform driver gpio: AMD G-Series PCH gpio driver drivers: depend on HAS_IOMEM for devm_platform_ioremap_resource() gpio: tqmx86: Set proper output level for direction_output gpio: sprd: Change to use SoC compatible string gpio: sprd: Use SoC compatible string instead of wildcard string gpio: of: Handle both enable-gpio{,s} gpio: of: Restrict enable-gpio quirk to regulator-gpio gpio: davinci: use devm_platform_ioremap_resource() ...
2019-02-23Merge tag 'irqchip-5.1' of ↵Thomas Gleixner1-0/+14
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip updates from Marc Zyngier - Core pseudo-NMI handling code - Allow the default irq domain to be retrieved - A new interrupt controller for the Loongson LS1X platform - Affinity support for the SiFive PLIC - Better support for the iMX irqsteer driver - NUMA aware memory allocations for GICv3 - A handful of other fixes (i8259, GICv3, PLIC)
2019-02-21irqdomain: Allow the default irq domain to be retrievedMarc Zyngier1-0/+14
The default irq domain allows legacy code to create irqdomain mappings without having to track the domain it is allocating from. Setting the default domain is a one shot, fire and forget operation, and no effort was made to be able to retrieve this information at a later point in time. Newer irqdomain APIs (the hierarchical stuff) relies on both the irqchip code to track the irqdomain it is allocating from, as well as some form of firmware abstraction to easily identify which piece of HW maps to which irq domain (DT, ACPI). For systems without such firmware (or legacy platform that are getting dragged into the 21st century), things are a bit harder. For these cases (and these cases only!), let's provide a way to retrieve the default domain, allowing the use of the v2 API without having to resort to platform-specific hacks. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-02-13genirq: introduce irq_domain_translate_twocellBrian Masney1-11/+34
Add a new function irq_domain_translate_twocell() that is to be used as the translate function in struct irq_domain_ops for the v2 IRQ API. This patch also changes irq_domain_xlate_twocell() from the v1 IRQ API to call irq_domain_translate_twocell() in the v2 IRQ API. This required changes to of_phandle_args_to_fwspec()'s arguments so that it can be called from multiple places. Cc: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-29genirq/debugfs: No need to check return value of debugfs_create functionsGreg Kroah-Hartman1-2/+0
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/20190122152151.16139-50-gregkh@linuxfoundation.org
2018-12-19genirq/core: Introduce struct irq_affinity_descDou Liyang1-2/+2
The interrupt affinity management uses straight cpumask pointers to convey the automatically assigned affinity masks for managed interrupts. The core interrupt descriptor allocation also decides based on the pointer being non NULL whether an interrupt is managed or not. Devices which use managed interrupts usually have two classes of interrupts: - Interrupts for multiple device queues - Interrupts for general device management Currently both classes are treated the same way, i.e. as managed interrupts. The general interrupts get the default affinity mask assigned while the device queue interrupts are spread out over the possible CPUs. Treating the general interrupts as managed is both a limitation and under certain circumstances a bug. Assume the following situation: default_irq_affinity = 4..7 So if CPUs 4-7 are offlined, then the core code will shut down the device management interrupts because the last CPU in their affinity mask went offline. It's also a limitation because it's desired to allow manual placement of the general device interrupts for various reasons. If they are marked managed then the interrupt affinity setting from both user and kernel space is disabled. To remedy that situation it's required to convey more information than the cpumasks through various interfaces related to interrupt descriptor allocation. Instead of adding yet another argument, create a new data structure 'irq_affinity_desc' which for now just contains the cpumask. This struct can be expanded to convey auxilliary information in the next step. No functional change, just preparatory work. [ tglx: Simplified logic and clarified changelog ] Suggested-by: Thomas Gleixner <tglx@linutronix.de> Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Dou Liyang <douliyangs@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-pci@vger.kernel.org Cc: kashyap.desai@broadcom.com Cc: shivasharan.srikanteshwara@broadcom.com Cc: sumit.saxena@broadcom.com Cc: ming.lei@redhat.com Cc: hch@lst.de Cc: douliyang1@huawei.com Link: https://lkml.kernel.org/r/20181204155122.6327-2-douliyangs@gmail.com
2018-10-09genirq: Fix grammar s/an /a /Geert Uytterhoeven1-1/+1
Fix a grammar mistake in <linux/interrupt.h>. [ mingo: While at it also fix another similar error in another comment as well. ] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Jiri Kosina <trivial@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20181008111726.26286-1-geert%2Brenesas@glider.be Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-10-01genirq/debugfs: Reinstate full OF path for domain nameMarc Zyngier1-1/+1
On a DT based system, we use the of_node full name to name the corresponding irq domain. We expect that name to be unique, so so that domains with the same base name won't clash (this happens on multi-node topologies, for example). Since a7e4cfb0a7ca ("of/fdt: only store the device node basename in full_name"), of_node_full_name() lies and only returns the basename. This breaks the above requirement, and we end-up with only a subset of the domains in /sys/kernel/debug/irq/domains. Let's reinstate the feature by using the fancy new %pOF format specifier, which happens to do the right thing. Fixes: a7e4cfb0a7ca ("of/fdt: only store the device node basename in full_name") Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20181001100522.180054-3-marc.zyngier@arm.com
2018-10-01genirq/debugfs: Reset domain debugfs_file on removal of the debugfs fileMarc Zyngier1-0/+1
When removing a debugfs file for a given irq domain, we fail to clear the corresponding field, meaning that the corresponding domain won't be created again if we need to do so. It turns out that this is exactly what irq_domain_update_bus_token does (delete old file, update domain name, recreate file). This doesn't have any impact other than making debug more difficult, but we do value ease of debugging... So clear the debugfs_file field. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20181001100522.180054-2-marc.zyngier@arm.com
2018-03-20genirq: Add missing SPDX identifiersThomas Gleixner1-0/+2
Add SPDX identifiers to files - which contain an explicit license boiler plate or reference - which do not contain a license reference and were not updated in the initial SPDX conversion because the license was deduced by the scanners via EXPORT_SYMBOL_GPL as GPL2.0 only. [ tglx: Moved adding identifiers from the patch which removes the references/boilerplate ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Link: https://lkml.kernel.org/r/20180314212030.668321222@linutronix.de
2018-02-16irqdomain: Re-use DEFINE_SHOW_ATTRIBUTE() macroAndy Shevchenko1-14/+4
...instead of open coding file operations followed by custom ->open() callbacks per each attribute. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-01-24irqdomain: Kill CONFIG_IRQ_DOMAIN_DEBUGMarc Zyngier1-118/+0
CONFIG_IRQ_DOMAIN_DEBUG is similar to CONFIG_GENERIC_IRQ_DEBUGFS, just with less information. Spring cleanup time. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Yang Shunyong <shunyong.yang@hxt-semitech.com> Link: https://lkml.kernel.org/r/20180117142647.23622-1-marc.zyngier@arm.com
2017-12-29genirq/irqdomain: Rename early argument of irq_domain_activate_irq()Thomas Gleixner1-6/+7
The 'early' argument of irq_domain_activate_irq() is actually used to denote reservation mode. To avoid confusion, rename it before abuse happens. No functional change. Fixes: 72491643469a ("genirq/irqdomain: Update irq_domain_ops.activate() signature") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexandru Chirvasitu <achirvasub@gmail.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Dou Liyang <douly.fnst@cn.fujitsu.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Mikael Pettersson <mikpelinux@gmail.com> Cc: Josh Poulson <jopoulso@microsoft.com> Cc: Mihai Costache <v-micos@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-pci@vger.kernel.org Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Dexuan Cui <decui@microsoft.com> Cc: Simon Xiao <sixiao@microsoft.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Jork Loeser <Jork.Loeser@microsoft.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: devel@linuxdriverproject.org Cc: KY Srinivasan <kys@microsoft.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Sakari Ailus <sakari.ailus@intel.com>, Cc: linux-media@vger.kernel.org
2017-11-13irqdomain: Drop pointless NULL check in virq_debug_show_oneRasmus Villemoes1-2/+1
data has been already derefenced unconditionally, so it's pointless to do a NULL pointer check on it afterwards. Drop it. [ tglx: Depersonify changelog. ] Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/20171112212904.28574-1-linux@rasmusvillemoes.dk
2017-10-19irqdomain: Add __rcu annotations to radix tree slotMasahiro Yamada1-2/+2
Fix different address spaces warning of sparse. kernel/irq/irqdomain.c:1463:14: warning: incorrect type in assignment (different address spaces) kernel/irq/irqdomain.c:1463:14: expected void **slot kernel/irq/irqdomain.c:1463:14: got void [noderef] <asn:4>** kernel/irq/irqdomain.c:1465:66: warning: incorrect type in argument 2 (different address spaces) kernel/irq/irqdomain.c:1465:66: expected void [noderef] <asn:4>**slot kernel/irq/irqdomain.c:1465:66: got void **slot Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-10-19irqdomain: Move revmap_trees_mutex to struct irq_domainMasahiro Yamada1-7/+7
The revmap_trees_mutex protects domain->revmap_tree. There is no need to make it global because it is allowed to modify revmap_tree of two different domains concurrently. Having said that, this would not be a actual bottleneck because the interrupt map/unmap does not occur quite often. Rather, the motivation is to tidy up the code from a data structure point of view. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-09-25genirq/irqdomain: Propagate early activationThomas Gleixner1-5/+6
Propagate the early activation mode to the irqdomain activate() callbacks. This is required for the upcoming reservation, late vector assignment scheme, so that the early activation call can act accordingly. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Yu Chen <yu.c.chen@intel.com> Acked-by: Juergen Gross <jgross@suse.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alok Kataria <akataria@vmware.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rui Zhang <rui.zhang@intel.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Len Brown <lenb@kernel.org> Link: https://lkml.kernel.org/r/20170913213153.028353660@linutronix.de
2017-09-25genirq/irqdomain: Allow irq_domain_activate_irq() to failThomas Gleixner1-15/+25
Allow irq_domain_activate_irq() to fail. This is required to support a reservation and late vector assignment scheme. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Yu Chen <yu.c.chen@intel.com> Acked-by: Juergen Gross <jgross@suse.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alok Kataria <akataria@vmware.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rui Zhang <rui.zhang@intel.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Len Brown <lenb@kernel.org> Link: https://lkml.kernel.org/r/20170913213152.933882227@linutronix.de
2017-09-25genirq/irqdomain: Update irq_domain_ops.activate() signatureThomas Gleixner1-1/+1
The irq_domain_ops.activate() callback has no return value and no way to tell the function that the activation is early. The upcoming changes to support a reservation scheme which allows to assign interrupt vectors on x86 only when the interrupt is actually requested requires: - A return value, so activation can fail at request_irq() time - Information that the activate invocation is early, i.e. before request_irq(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Yu Chen <yu.c.chen@intel.com> Acked-by: Juergen Gross <jgross@suse.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alok Kataria <akataria@vmware.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rui Zhang <rui.zhang@intel.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Len Brown <lenb@kernel.org> Link: https://lkml.kernel.org/r/20170913213152.848490816@linutronix.de
2017-09-25irqdomain/debugfs: Provide domain specific debug callbackThomas Gleixner1-0/+2
Some interrupt domains like the X86 vector domain has special requirements for debugging, like showing the vector usage on the CPUs. Add a callback to the irqdomain ops which can be filled in by domains which require it and add conditional invocations to the irqdomain and the per irq debug files. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Tested-by: Yu Chen <yu.c.chen@intel.com> Acked-by: Juergen Gross <jgross@suse.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Alok Kataria <akataria@vmware.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rui Zhang <rui.zhang@intel.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Len Brown <lenb@kernel.org> Link: https://lkml.kernel.org/r/20170913213152.512937505@linutronix.de
2017-09-05Merge tag 'devprop-4.14-rc1' of ↵Linus Torvalds1-5/+6
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull device properties framework updates from Rafael Wysocki: "These introduce fwnode operations for all of the separate types of 'firmware nodes' that can be handled by the device properties framework, make the framework use const fwnode arguments all over, add a helper for the consolidated handling of node references and switch over the framework to the new UUID API. Specifics: - Introduce fwnode operations for all of the separate types of 'firmware nodes' that can be handled by the device properties framework and drop the type field from struct fwnode_handle (Sakari Ailus, Arnd Bergmann). - Make the device properties framework use const fwnode arguments where possible (Sakari Ailus). - Add a helper for the consolidated handling of node references to the device properties framework (Sakari Ailus). - Switch over the ACPI part of the device properties framework to the new UUID API (Andy Shevchenko)" * tag 'devprop-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: device property: Switch to use new generic UUID API device property: export irqchip_fwnode_ops device property: Introduce fwnode_property_get_reference_args device property: Constify fwnode property API device property: Constify argument to pset fwnode backend ACPI: Constify internal fwnode arguments ACPI: Constify acpi_bus helper functions, switch to macros ACPI: Prepare for constifying acpi_get_next_subnode() fwnode argument device property: Get rid of struct fwnode_handle type field ACPI: Use IS_ERR_OR_NULL() instead of non-NULL check in is_acpi_data_node()
2017-08-25irqdomain: Prevent potential NULL pointer dereference in irq_domain_push_irq()Dan Carpenter1-2/+2
This code generates a Smatch warning: kernel/irq/irqdomain.c:1511 irq_domain_push_irq() warn: variable dereferenced before check 'root_irq_data' (see line 1508) irq_get_irq_data() can return a NULL pointer, but the code dereferences the returned pointer before checking it. Move the NULL pointer check before the dereference. [ tglx: Rewrote changelog to be precise and conforming to the instructions in submitting-patches and added a Fixes tag. Sigh! ] Fixes: 495c38d3001f ("irqdomain: Add irq_domain_{push,pop}_irq() functions") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: David Daney <david.daney@cavium.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: kernel-janitors@vger.kernel.org Link: http://lkml.kernel.org/r/20170825121409.6rfv4vt6ztz2oqkt@mwanda
2017-08-18irqdomain: Add irq_domain_{push,pop}_irq() functionsDavid Daney1-0/+169
For an already existing irqdomain hierarchy, as might be obtained via a call to pci_enable_msix_range(), a PCI driver wishing to add an additional irqdomain to the hierarchy needs to be able to insert the irqdomain to that already initialized hierarchy. Calling irq_domain_create_hierarchy() allows the new irqdomain to be created, but no existing code allows for initializing the associated irq_data. Add a couple of helper functions (irq_domain_push_irq() and irq_domain_pop_irq()) to initialize the irq_data for the new irqdomain added to an existing hierarchy. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Link: http://lkml.kernel.org/r/1503017616-3252-6-git-send-email-david.daney@cavium.com
2017-08-18irqdomain: Check for NULL function pointer in irq_domain_free_irqs_hierarchy()David Daney1-1/+2
A follow-on patch will call irq_domain_free_irqs_hierarchy() when the free() function pointer may be NULL. Add a NULL pointer check to handle this new use case. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Link: http://lkml.kernel.org/r/1503017616-3252-5-git-send-email-david.daney@cavium.com
2017-08-18irqdomain: Factor out code to add and remove items to and from the revmapDavid Daney1-29/+29
The code to add and remove items to and from the revmap occurs several times. In preparation for the follow on patches that add more uses of this code, factor this out in to separate static functions. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Link: http://lkml.kernel.org/r/1503017616-3252-4-git-send-email-david.daney@cavium.com
2017-07-26device property: export irqchip_fwnode_opsArnd Bergmann1-0/+1
The newly added irqchip_fwnode_ops structure is not exported, which can lead to link errors: ERROR: "irqchip_fwnode_ops" [drivers/gpio/gpio-xgene-sb.ko] undefined! I checked that all other such symbols that were introduced are exported if they need to be, this is the only missing one. Fixes: db3e50f3234b (device property: Get rid of struct fwnode_handle type field) Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-22device property: Get rid of struct fwnode_handle type fieldSakari Ailus1-5/+5
Instead of relying on the struct fwnode_handle type field, define fwnode_operations structs for all separate types of fwnodes. To find out the type, compare to the ops field to relevant ops structs. This change has two benefits: 1. it avoids adding the type field to each and every instance of struct fwnode_handle, thus saving memory and 2. makes the ops field the single factor that defines both the types of the fwnode as well as defines the implementation of its operations, decreasing the possibility of bugs when developing code dealing with fwnode internals. Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-07irqdomain: Allow ACPI device nodes to be used as irqdomain identifiersMarc Zyngier1-0/+16
A number of irqchip implementations are (ab)using the irqdomain allocator by passing a fwnode that is neither a FWNODE_OF or a FWNODE_IRQCHIP. This is pretty bad, but it also feels pretty crap to force these drivers to allocate their own irqchip_fwid when they already have a proper fwnode. Instead, let's teach the irqdomain allocator about ACPI device nodes, and add some lovely name generation code... Tested on an arm64 D05 system. Reported-and-tested-by: John Garry <john.garry@huawei.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Agustin Vega-Frias <agustinv@codeaurora.org> Cc: Ma Jun <majun258@huawei.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Link: http://lkml.kernel.org/r/20170707083959.10349-1-marc.zyngier@arm.com
2017-07-07genirq/debugfs: Remove redundant NULL pointer checkThomas Gleixner1-2/+1
debugfs_remove() can be called with a NULL pointer. Fixes: 087cdfb662ae5 ("genirq/debugfs: Add proper debugfs interface") Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-06-22genirq/irqdomain: Remove auto-recursive hierarchy supportMarc Zyngier1-42/+13
It did seem like a good idea at the time, but it never really caught on, and auto-recursive domains remain unused 3 years after having been introduced. Oh well, time for a late spring cleanup. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-06-22genirq/irqdomain: Add irq_domain_update_bus_token helperMarc Zyngier1-0/+31
We can have irq domains that are identified by the same fwnode (because they are serviced by the same HW), and yet have different functionnality (because they serve different busses, for example). This is what we use the bus_token field. Since we don't use this field when generating the domain name, all the aliasing domains will get the same name, and the debugfs file creation fails. Also, bus_token is updated by individual drivers, and the core code is unaware of that update. In order to sort this mess, let's introduce a helper that takes care of updating bus_token, and regenerate the debugfs file. A separate patch will update all the individual users. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-06-22genirq/debugfs: Add proper debugfs interfaceThomas Gleixner1-1/+86
Debugging (hierarchical) interupt domains is tedious as there is no information about the hierarchy and no information about states of interrupts in the various domain levels. Add a debugfs directory 'irq' and subdirectories 'domains' and 'irqs'. The domains directory contains the domain files. The content is information about the domain. If the domain is part of a hierarchy then the parent domains are printed as well. # ls /sys/kernel/debug/irq/domains/ default INTEL-IR-2 INTEL-IR-MSI-2 IO-APIC-IR-2 PCI-MSI DMAR-MSI INTEL-IR-3 INTEL-IR-MSI-3 IO-APIC-IR-3 unknown-1 INTEL-IR-0 INTEL-IR-MSI-0 IO-APIC-IR-0 IO-APIC-IR-4 VECTOR INTEL-IR-1 INTEL-IR-MSI-1 IO-APIC-IR-1 PCI-HT # cat /sys/kernel/debug/irq/domains/VECTOR name: VECTOR size: 0 mapped: 216 flags: 0x00000041 # cat /sys/kernel/debug/irq/domains/IO-APIC-IR-0 name: IO-APIC-IR-0 size: 24 mapped: 19 flags: 0x00000041 parent: INTEL-IR-3 name: INTEL-IR-3 size: 65536 mapped: 167 flags: 0x00000041 parent: VECTOR name: VECTOR size: 0 mapped: 216 flags: 0x00000041 Unfortunately there is no per cpu information about the VECTOR domain (yet). The irqs directory contains detailed information about mapped interrupts. # cat /sys/kernel/debug/irq/irqs/3 handler: handle_edge_irq status: 0x00004000 istate: 0x00000000 ddepth: 1 wdepth: 0 dstate: 0x01018000 IRQD_IRQ_DISABLED IRQD_SINGLE_TARGET IRQD_MOVE_PCNTXT node: 0 affinity: 0-143 effectiv: 0 pending: domain: IO-APIC-IR-0 hwirq: 0x3 chip: IR-IO-APIC flags: 0x10 IRQCHIP_SKIP_SET_WAKE parent: domain: INTEL-IR-3 hwirq: 0x20000 chip: INTEL-IR flags: 0x0 parent: domain: VECTOR hwirq: 0x3 chip: APIC flags: 0x0 This was developed to simplify the debugging of the managed affinity changes. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235444.537566163@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-06-22genirq/irqdomain: Add map counterThomas Gleixner1-0/+4
Add a map counter instead of counting radix tree entries for diagnosis. That also gives correct information for linear domains. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235444.459397746@linutronix.de
2017-06-22genirq: Allow fwnode to carry name information onlyThomas Gleixner1-13/+92
In order to provide proper debug interface it's required to have domain names available when the domain is added. Non fwnode based architectures like x86 have no way to do so. It's not possible to use domain ops or host data for this as domain ops might be the same for several instances, but the names have to be unique. Extend the irqchip fwnode to allow transporting the domain name. If no node is supplied, create a 'unknown-N' placeholder. Warn if an invalid node is supplied and treat it like no node. This happens e.g. with i2 devices on x86 which hand in an ACPI type node which has no interface for retrieving the name. [ Folded a fix from Marc to make DT name parsing work ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Link: http://lkml.kernel.org/r/20170619235443.588784933@linutronix.de
2017-05-22irqdomain: Let irq_domain_mapping display ACPI fwnode attributesMarc Zyngier1-1/+12
If the system is using ACPI, there is no of_node to display. But ACPI can use a struct irqchip_fwid as a domain identifier, and it can be used to display the name contained in that structure. The output on such a system will look like this: pMSI 0 0 0 irqchip@00000000e1180000 MSI 37 0 0 irqchip@00000000e1180000 GICv2m 37 0 0 irqchip@00000000e1180000 GICv2 448 448 0 irqchip@ffff000008003000 Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: http://lkml.kernel.org/r/20170512115538.10767-3-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-05-22irqdomain: Let irq_domain_mapping display hierarchical domainsMarc Zyngier1-25/+43
Hierarchical domains seem to be hard to grasp, and a number of aspiring kernel hackers find them utterly discombobulating. In order to ease their pain, let's make them appear in /sys/kernel/debug/irq_domain_mapping, such as the following: 96 0x81808 MSI 0x (null) RADIX MSI 96+ 0x00063 GICv2m 0xffff8003ee116980 RADIX GICv2m 96+ 0x00063 GICv2 0xffff00000916bfd8 LINEAR GICv2 [output compressed to fit in a commit log] This shows that IRQ96 is implemented by a stack of three domains, the + sign indicating the stacking. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: http://lkml.kernel.org/r/20170512115538.10767-2-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-23 19:30:09 +0300