| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit 5f4e5ce638e6a490b976ade4a40017b40abb2da0 upstream.
There's list corruption on cgrp_cpuctx_list. This happens on the
following path:
perf_cgroup_switch: list_for_each_entry(cgrp_cpuctx_list)
cpu_ctx_sched_in
ctx_sched_in
ctx_pinned_sched_in
merge_sched_in
perf_cgroup_event_disable: remove the event from the list
Use list_for_each_entry_safe() to allow removing an entry during
iteration.
Fixes: 058fe1c0440e ("perf/core: Make cgroup switch visit only cpuctxs with cgroup events")
Signed-off-by: Song Liu <song@kernel.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220204004057.2961252-1-song@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 961c39121759ad09a89598ec4ccdd34ae0468a19 ]
When using per-process mode and event inheritance is set to true,
forked processes will create a new perf events via inherit_event() ->
perf_event_alloc(). But these events will not have ring buffers
assigned to them. Any call to wakeup will be dropped if it's called on
an event with no ring buffer assigned because that's the object that
holds the wakeup list.
If the child event is disabled due to a call to
perf_aux_output_begin() or perf_aux_output_end(), the wakeup is
dropped leaving userspace hanging forever on the poll.
Normally the event is explicitly re-enabled by userspace after it
wakes up to read the aux data, but in this case it does not get woken
up so the event remains disabled.
This can be reproduced when using Arm SPE and 'stress' which forks once
before running the workload. By looking at the list of aux buffers read,
it's apparent that they stop after the fork:
perf record -e arm_spe// -vvv -- stress -c 1
With this patch applied they continue to be printed. This behaviour
doesn't happen when using systemwide or per-cpu mode.
Reported-by: Ruben Ayrapetyan <Ruben.Ayrapetyan@arm.com>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211206113840.130802-2-james.clark@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3c25fc97f5590060464cabfa25710970ecddbc96 ]
The intent has always been that perf_event_attr::sig_data should also be
modifiable along with PERF_EVENT_IOC_MODIFY_ATTRIBUTES, because it is
observable by user space if SIGTRAP on events is requested.
Currently only PERF_TYPE_BREAKPOINT is modifiable, and explicitly copies
relevant breakpoint-related attributes in hw_breakpoint_copy_attr().
This misses copying perf_event_attr::sig_data.
Since sig_data is not specific to PERF_TYPE_BREAKPOINT, introduce a
helper to copy generic event-type-independent attributes on
modification.
Fixes: 97ba62b27867 ("perf: Add support for SIGTRAP on perf events")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://lore.kernel.org/r/20220131103407.1971678-1-elver@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit c5de60cd622a2607c043ba65e25a6e9998a369f9 upstream.
The active cgroup events are managed in the per-cpu cgrp_cpuctx_list.
This list is only accessed from current cpu and not protected by any
locks. But from the commit ef54c1a476ae ("perf: Rework
perf_event_exit_event()"), it's possible to access (actually modify)
the list from another cpu.
In the perf_remove_from_context(), it can remove an event from the
context without an IPI when the context is not active. This is not
safe with cgroup events which can have some active events in the
context even if ctx->is_active is 0 at the moment. The target cpu
might be in the middle of list iteration at the same time.
If the event is enabled when it's about to be closed, it might call
perf_cgroup_event_disable() and list_del() with the cgrp_cpuctx_list
on a different cpu.
This resulted in a crash due to an invalid list pointer access during
the cgroup list traversal on the cpu which the event belongs to.
Let's fallback to IPI to access the cgrp_cpuctx_list from that cpu.
Similarly, perf_install_in_context() should use IPI for the cgroup
events too.
Fixes: ef54c1a476ae ("perf: Rework perf_event_exit_event()")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220124195808.2252071-1-namhyung@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 09f5e7dc7ad705289e1b1ec065439aa3c42951c4 ]
Time readers that cannot take locks (due to NMI etc..) currently make
use of perf_event::shadow_ctx_time, which, for that event gives:
time' = now + (time - timestamp)
or, alternatively arranged:
time' = time + (now - timestamp)
IOW, the progression of time since the last time the shadow_ctx_time
was updated.
There's problems with this:
A) the shadow_ctx_time is per-event, even though the ctx_time it
reflects is obviously per context. The direct concequence of this
is that the context needs to iterate all events all the time to
keep the shadow_ctx_time in sync.
B) even with the prior point, the context itself might not be active
meaning its time should not advance to begin with.
C) shadow_ctx_time isn't consistently updated when ctx_time is
There are 3 users of this stuff, that suffer differently from this:
- calc_timer_values()
- perf_output_read()
- perf_event_update_userpage() /* A */
- perf_event_read_local() /* A,B */
In particular, perf_output_read() doesn't suffer at all, because it's
sample driven and hence only relevant when the event is actually
running.
This same was supposed to be true for perf_event_update_userpage(),
after all self-monitoring implies the context is active *HOWEVER*, as
per commit f79256532682 ("perf/core: fix userpage->time_enabled of
inactive events") this goes wrong when combined with counter
overcommit, in that case those events that do not get scheduled when
the context becomes active (task events typically) miss out on the
EVENT_TIME update and ENABLED time is inflated (for a little while)
with the time the context was inactive. Once the event gets rotated
in, this gets corrected, leading to a non-monotonic timeflow.
perf_event_read_local() made things even worse, it can request time at
any point, suffering all the problems perf_event_update_userpage()
does and more. Because while perf_event_update_userpage() is limited
by the context being active, perf_event_read_local() users have no
such constraint.
Therefore, completely overhaul things and do away with
perf_event::shadow_ctx_time. Instead have regular context time updates
keep track of this offset directly and provide perf_event_time_now()
to complement perf_event_time().
perf_event_time_now() will, in adition to being context wide, also
take into account if the context is active. For inactive context, it
will not advance time.
This latter property means the cgroup perf_cgroup_info context needs
to grow addition state to track this.
Additionally, since all this is strictly per-cpu, we can use barrier()
to order context activity vs context time.
Fixes: 7d9285e82db5 ("perf/bpf: Extend the perf_event_read_local() interface, a.k.a. "bpf: perf event change needed for subsequent bpf helpers"")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Song Liu <song@kernel.org>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/r/YcB06DasOBtU0b00@hirez.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit ff083a2d972f56bebfd82409ca62e5dfce950961 upstream.
Protect perf_guest_cbs with RCU to fix multiple possible errors. Luckily,
all paths that read perf_guest_cbs already require RCU protection, e.g. to
protect the callback chains, so only the direct perf_guest_cbs touchpoints
need to be modified.
Bug #1 is a simple lack of WRITE_ONCE/READ_ONCE behavior to ensure
perf_guest_cbs isn't reloaded between a !NULL check and a dereference.
Fixed via the READ_ONCE() in rcu_dereference().
Bug #2 is that on weakly-ordered architectures, updates to the callbacks
themselves are not guaranteed to be visible before the pointer is made
visible to readers. Fixed by the smp_store_release() in
rcu_assign_pointer() when the new pointer is non-NULL.
Bug #3 is that, because the callbacks are global, it's possible for
readers to run in parallel with an unregisters, and thus a module
implementing the callbacks can be unloaded while readers are in flight,
resulting in a use-after-free. Fixed by a synchronize_rcu() call when
unregistering callbacks.
Bug #1 escaped notice because it's extremely unlikely a compiler will
reload perf_guest_cbs in this sequence. perf_guest_cbs does get reloaded
for future derefs, e.g. for ->is_user_mode(), but the ->is_in_guest()
guard all but guarantees the consumer will win the race, e.g. to nullify
perf_guest_cbs, KVM has to completely exit the guest and teardown down
all VMs before KVM start its module unload / unregister sequence. This
also makes it all but impossible to encounter bug #3.
Bug #2 has not been a problem because all architectures that register
callbacks are strongly ordered and/or have a static set of callbacks.
But with help, unloading kvm_intel can trigger bug #1 e.g. wrapping
perf_guest_cbs with READ_ONCE in perf_misc_flags() while spamming
kvm_intel module load/unload leads to:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP
CPU: 6 PID: 1825 Comm: stress Not tainted 5.14.0-rc2+ #459
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:perf_misc_flags+0x1c/0x70
Call Trace:
perf_prepare_sample+0x53/0x6b0
perf_event_output_forward+0x67/0x160
__perf_event_overflow+0x52/0xf0
handle_pmi_common+0x207/0x300
intel_pmu_handle_irq+0xcf/0x410
perf_event_nmi_handler+0x28/0x50
nmi_handle+0xc7/0x260
default_do_nmi+0x6b/0x170
exc_nmi+0x103/0x130
asm_exc_nmi+0x76/0xbf
Fixes: 39447b386c84 ("perf: Enhance perf to allow for guest statistic collection from host")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211111020738.2512932-2-seanjc@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 73743c3b092277febbf69b250ce8ebbca0525aa2 ]
syzbot reported that the warning in perf_sigtrap() fires, saying that
the event's task does not match current:
| WARNING: CPU: 0 PID: 9090 at kernel/events/core.c:6446 perf_pending_event+0x40d/0x4b0 kernel/events/core.c:6513
| Modules linked in:
| CPU: 0 PID: 9090 Comm: syz-executor.1 Not tainted 5.15.0-syzkaller #0
| Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
| RIP: 0010:perf_sigtrap kernel/events/core.c:6446 [inline]
| RIP: 0010:perf_pending_event_disable kernel/events/core.c:6470 [inline]
| RIP: 0010:perf_pending_event+0x40d/0x4b0 kernel/events/core.c:6513
| ...
| Call Trace:
| <IRQ>
| irq_work_single+0x106/0x220 kernel/irq_work.c:211
| irq_work_run_list+0x6a/0x90 kernel/irq_work.c:242
| irq_work_run+0x4f/0xd0 kernel/irq_work.c:251
| __sysvec_irq_work+0x95/0x3d0 arch/x86/kernel/irq_work.c:22
| sysvec_irq_work+0x8e/0xc0 arch/x86/kernel/irq_work.c:17
| </IRQ>
| <TASK>
| asm_sysvec_irq_work+0x12/0x20 arch/x86/include/asm/idtentry.h:664
| RIP: 0010:__raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:152 [inline]
| RIP: 0010:_raw_spin_unlock_irqrestore+0x38/0x70 kernel/locking/spinlock.c:194
| ...
| coredump_task_exit kernel/exit.c:371 [inline]
| do_exit+0x1865/0x25c0 kernel/exit.c:771
| do_group_exit+0xe7/0x290 kernel/exit.c:929
| get_signal+0x3b0/0x1ce0 kernel/signal.c:2820
| arch_do_signal_or_restart+0x2a9/0x1c40 arch/x86/kernel/signal.c:868
| handle_signal_work kernel/entry/common.c:148 [inline]
| exit_to_user_mode_loop kernel/entry/common.c:172 [inline]
| exit_to_user_mode_prepare+0x17d/0x290 kernel/entry/common.c:207
| __syscall_exit_to_user_mode_work kernel/entry/common.c:289 [inline]
| syscall_exit_to_user_mode+0x19/0x60 kernel/entry/common.c:300
| do_syscall_64+0x42/0xb0 arch/x86/entry/common.c:86
| entry_SYSCALL_64_after_hwframe+0x44/0xae
On x86 this shouldn't happen, which has arch_irq_work_raise().
The test program sets up a perf event with sigtrap set to fire on the
'sched_wakeup' tracepoint, which fired in ttwu_do_wakeup().
This happened because the 'sched_wakeup' tracepoint also takes a task
argument passed on to perf_tp_event(), which is used to deliver the
event to that other task.
Since we cannot deliver synchronous signals to other tasks, skip an event if
perf_tp_event() is targeted at another task and perf_event_attr::sigtrap is
set, which will avoid ever entering perf_sigtrap() for such events.
Fixes: 97ba62b27867 ("perf: Add support for SIGTRAP on perf events")
Reported-by: syzbot+663359e32ce6f1a305ad@syzkaller.appspotmail.com
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/YYpoCOBmC/kJWfmI@elver.google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 4716023a8f6a0f4a28047f14dd7ebdc319606b84 upstream.
PEBS PERF_SAMPLE_PHYS_ADDR events use perf_virt_to_phys() to convert PMU
sampled virtual addresses to physical using get_user_page_fast_only()
and page_to_phys().
Some get_user_page_fast_only() error cases return false, indicating no
page reference, but still initialize the output page pointer with an
unreferenced page. In these error cases perf_virt_to_phys() calls
put_page(). This causes page reference count underflow, which can lead
to unintentional page sharing.
Fix perf_virt_to_phys() to only put_page() if get_user_page_fast_only()
returns a referenced page.
Fixes: fc7ce9c74c3ad ("perf/core, x86: Add PERF_SAMPLE_PHYS_ADDR")
Signed-off-by: Greg Thelen <gthelen@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211111021814.757086-1-gthelen@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Users of rdpmc rely on the mmapped user page to calculate accurate
time_enabled. Currently, userpage->time_enabled is only updated when the
event is added to the pmu. As a result, inactive event (due to counter
multiplexing) does not have accurate userpage->time_enabled. This can
be reproduced with something like:
/* open 20 task perf_event "cycles", to create multiplexing */
fd = perf_event_open(); /* open task perf_event "cycles" */
userpage = mmap(fd); /* use mmap and rdmpc */
while (true) {
time_enabled_mmap = xxx; /* use logic in perf_event_mmap_page */
time_enabled_read = read(fd).time_enabled;
if (time_enabled_mmap > time_enabled_read)
BUG();
}
Fix this by updating userpage for inactive events in merge_sched_in.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reported-and-tested-by: Lucian Grijincu <lucian@fb.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210929194313.2398474-1-songliubraving@fb.com
|
|
In perf_event_addr_filters_apply, the task associated with
the event (event->ctx->task) is read using READ_ONCE at the beginning
of the function, checked, and then re-read from event->ctx->task,
voiding all guarantees of the checks. Reuse the value that was read by
READ_ONCE to ensure the consistency of the task struct throughout the
function.
Fixes: 375637bc52495 ("perf/core: Introduce address range filtering")
Signed-off-by: Baptiste Lepers <baptiste.lepers@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210906015310.12802-1-baptiste.lepers@gmail.com
|
|
Pull MAP_DENYWRITE removal from David Hildenbrand:
"Remove all in-tree usage of MAP_DENYWRITE from the kernel and remove
VM_DENYWRITE.
There are some (minor) user-visible changes:
- We no longer deny write access to shared libaries loaded via legacy
uselib(); this behavior matches modern user space e.g. dlopen().
- We no longer deny write access to the elf interpreter after exec
completed, treating it just like shared libraries (which it often
is).
- We always deny write access to the file linked via /proc/pid/exe:
sys_prctl(PR_SET_MM_MAP/EXE_FILE) will fail if write access to the
file cannot be denied, and write access to the file will remain
denied until the link is effectivel gone (exec, termination,
sys_prctl(PR_SET_MM_MAP/EXE_FILE)) -- just as if exec'ing the file.
Cross-compiled for a bunch of architectures (alpha, microblaze, i386,
s390x, ...) and verified via ltp that especially the relevant tests
(i.e., creat07 and execve04) continue working as expected"
* tag 'denywrite-for-5.15' of git://github.com/davidhildenbrand/linux:
fs: update documentation of get_write_access() and friends
mm: ignore MAP_DENYWRITE in ksys_mmap_pgoff()
mm: remove VM_DENYWRITE
binfmt: remove in-tree usage of MAP_DENYWRITE
kernel/fork: always deny write access to current MM exe_file
kernel/fork: factor out replacing the current MM exe_file
binfmt: don't use MAP_DENYWRITE when loading shared libraries via uselib()
|
|
All in-tree users of MAP_DENYWRITE are gone. MAP_DENYWRITE cannot be
set from user space, so all users are gone; let's remove it.
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Enable memcg accounting for various networking objects.
BPF:
- Introduce bpf timers.
- Add perf link and opaque bpf_cookie which the program can read out
again, to be used in libbpf-based USDT library.
- Add bpf_task_pt_regs() helper to access user space pt_regs in
kprobes, to help user space stack unwinding.
- Add support for UNIX sockets for BPF sockmap.
- Extend BPF iterator support for UNIX domain sockets.
- Allow BPF TCP congestion control progs and bpf iterators to call
bpf_setsockopt(), e.g. to switch to another congestion control
algorithm.
Protocols:
- Support IOAM Pre-allocated Trace with IPv6.
- Support Management Component Transport Protocol.
- bridge: multicast: add vlan support.
- netfilter: add hooks for the SRv6 lightweight tunnel driver.
- tcp:
- enable mid-stream window clamping (by user space or BPF)
- allow data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD
- more accurate DSACK processing for RACK-TLP
- mptcp:
- add full mesh path manager option
- add partial support for MP_FAIL
- improve use of backup subflows
- optimize option processing
- af_unix: add OOB notification support.
- ipv6: add IFLA_INET6_RA_MTU to expose MTU value advertised by the
router.
- mac80211: Target Wake Time support in AP mode.
- can: j1939: extend UAPI to notify about RX status.
Driver APIs:
- Add page frag support in page pool API.
- Many improvements to the DSA (distributed switch) APIs.
- ethtool: extend IRQ coalesce uAPI with timer reset modes.
- devlink: control which auxiliary devices are created.
- Support CAN PHYs via the generic PHY subsystem.
- Proper cross-chip support for tag_8021q.
- Allow TX forwarding for the software bridge data path to be
offloaded to capable devices.
Drivers:
- veth: more flexible channels number configuration.
- openvswitch: introduce per-cpu upcall dispatch.
- Add internet mix (IMIX) mode to pktgen.
- Transparently handle XDP operations in the bonding driver.
- Add LiteETH network driver.
- Renesas (ravb):
- support Gigabit Ethernet IP
- NXP Ethernet switch (sja1105):
- fast aging support
- support for "H" switch topologies
- traffic termination for ports under VLAN-aware bridge
- Intel 1G Ethernet
- support getcrosststamp() with PCIe PTM (Precision Time
Measurement) for better time sync
- support Credit-Based Shaper (CBS) offload, enabling HW traffic
prioritization and bandwidth reservation
- Broadcom Ethernet (bnxt)
- support pulse-per-second output
- support larger Rx rings
- Mellanox Ethernet (mlx5)
- support ethtool RSS contexts and MQPRIO channel mode
- support LAG offload with bridging
- support devlink rate limit API
- support packet sampling on tunnels
- Huawei Ethernet (hns3):
- basic devlink support
- add extended IRQ coalescing support
- report extended link state
- Netronome Ethernet (nfp):
- add conntrack offload support
- Broadcom WiFi (brcmfmac):
- add WPA3 Personal with FT to supported cipher suites
- support 43752 SDIO device
- Intel WiFi (iwlwifi):
- support scanning hidden 6GHz networks
- support for a new hardware family (Bz)
- Xen pv driver:
- harden netfront against malicious backends
- Qualcomm mobile
- ipa: refactor power management and enable automatic suspend
- mhi: move MBIM to WWAN subsystem interfaces
Refactor:
- Ambient BPF run context and cgroup storage cleanup.
- Compat rework for ndo_ioctl.
Old code removal:
- prism54 remove the obsoleted driver, deprecated by the p54 driver.
- wan: remove sbni/granch driver"
* tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1715 commits)
net: Add depends on OF_NET for LiteX's LiteETH
ipv6: seg6: remove duplicated include
net: hns3: remove unnecessary spaces
net: hns3: add some required spaces
net: hns3: clean up a type mismatch warning
net: hns3: refine function hns3_set_default_feature()
ipv6: remove duplicated 'net/lwtunnel.h' include
net: w5100: check return value after calling platform_get_resource()
net/mlxbf_gige: Make use of devm_platform_ioremap_resourcexxx()
net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource()
net: mdio-ipq4019: Make use of devm_platform_ioremap_resource()
fou: remove sparse errors
ipv4: fix endianness issue in inet_rtm_getroute_build_skb()
octeontx2-af: Set proper errorcode for IPv4 checksum errors
octeontx2-af: Fix static code analyzer reported issues
octeontx2-af: Fix mailbox errors in nix_rss_flowkey_cfg
octeontx2-af: Fix loop in free and unmap counter
af_unix: fix potential NULL deref in unix_dgram_connect()
dpaa2-eth: Replace strlcpy with strscpy
octeontx2-af: Use NDC TX for transmit packet data
...
|
|
The functions get_online_cpus() and put_online_cpus() have been
deprecated during the CPU hotplug rework. They map directly to
cpus_read_lock() and cpus_read_unlock().
Replace deprecated CPU-hotplug functions with the official version.
The behavior remains unchanged.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210803141621.780504-12-bigeasy@linutronix.de
|
|
Andrii reported that libbpf CI hit the following oops when
running selftest send_signal:
[ 1243.160719] BUG: kernel NULL pointer dereference, address: 0000000000000030
[ 1243.161066] #PF: supervisor read access in kernel mode
[ 1243.161066] #PF: error_code(0x0000) - not-present page
[ 1243.161066] PGD 0 P4D 0
[ 1243.161066] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 1243.161066] CPU: 1 PID: 882 Comm: new_name Tainted: G O 5.14.0-rc5 #1
[ 1243.161066] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
[ 1243.161066] RIP: 0010:bpf_overflow_handler+0x9a/0x1e0
[ 1243.161066] Code: 5a 84 c0 0f 84 06 01 00 00 be 66 02 00 00 48 c7 c7 6d 96 07 82 48 8b ab 18 05 00 00 e8 df 55 eb ff 66 90 48 8d 75 48 48 89 e7 <ff> 55 30 41 89 c4 e8 fb c1 f0 ff 84 c0 0f 84 94 00 00 00 e8 6e 0f
[ 1243.161066] RSP: 0018:ffffc900000c0d80 EFLAGS: 00000046
[ 1243.161066] RAX: 0000000000000002 RBX: ffff8881002e0dd0 RCX: 00000000b4b47cf8
[ 1243.161066] RDX: ffffffff811dcb06 RSI: 0000000000000048 RDI: ffffc900000c0d80
[ 1243.161066] RBP: 0000000000000000 R08: 0000000000000000 R09: 1a9d56bb00000000
[ 1243.161066] R10: 0000000000000001 R11: 0000000000080000 R12: 0000000000000000
[ 1243.161066] R13: ffffc900000c0e00 R14: ffffc900001c3c68 R15: 0000000000000082
[ 1243.161066] FS: 00007fc0be2d3380(0000) GS:ffff88813bd00000(0000) knlGS:0000000000000000
[ 1243.161066] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1243.161066] CR2: 0000000000000030 CR3: 0000000104f8e000 CR4: 00000000000006e0
[ 1243.161066] Call Trace:
[ 1243.161066] <IRQ>
[ 1243.161066] __perf_event_overflow+0x4f/0xf0
[ 1243.161066] perf_swevent_hrtimer+0x116/0x130
[ 1243.161066] ? __lock_acquire+0x378/0x2730
[ 1243.161066] ? __lock_acquire+0x372/0x2730
[ 1243.161066] ? lock_is_held_type+0xd5/0x130
[ 1243.161066] ? find_held_lock+0x2b/0x80
[ 1243.161066] ? lock_is_held_type+0xd5/0x130
[ 1243.161066] ? perf_event_groups_first+0x80/0x80
[ 1243.161066] ? perf_event_groups_first+0x80/0x80
[ 1243.161066] __hrtimer_run_queues+0x1a3/0x460
[ 1243.161066] hrtimer_interrupt+0x110/0x220
[ 1243.161066] __sysvec_apic_timer_interrupt+0x8a/0x260
[ 1243.161066] sysvec_apic_timer_interrupt+0x89/0xc0
[ 1243.161066] </IRQ>
[ 1243.161066] asm_sysvec_apic_timer_interrupt+0x12/0x20
[ 1243.161066] RIP: 0010:finish_task_switch+0xaf/0x250
[ 1243.161066] Code: 31 f6 68 90 2a 09 81 49 8d 7c 24 18 e8 aa d6 03 00 4c 89 e7 e8 12 ff ff ff 4c 89 e7 e8 ca 9c 80 00 e8 35 af 0d 00 fb 4d 85 f6 <58> 74 1d 65 48 8b 04 25 c0 6d 01 00 4c 3b b0 a0 04 00 00 74 37 f0
[ 1243.161066] RSP: 0018:ffffc900001c3d18 EFLAGS: 00000282
[ 1243.161066] RAX: 000000000000031f RBX: ffff888104cf4980 RCX: 0000000000000000
[ 1243.161066] RDX: 0000000000000000 RSI: ffffffff82095460 RDI: ffffffff820adc4e
[ 1243.161066] RBP: ffffc900001c3d58 R08: 0000000000000001 R09: 0000000000000001
[ 1243.161066] R10: 0000000000000001 R11: 0000000000080000 R12: ffff88813bd2bc80
[ 1243.161066] R13: ffff8881002e8000 R14: ffff88810022ad80 R15: 0000000000000000
[ 1243.161066] ? finish_task_switch+0xab/0x250
[ 1243.161066] ? finish_task_switch+0x70/0x250
[ 1243.161066] __schedule+0x36b/0xbb0
[ 1243.161066] ? _raw_spin_unlock_irqrestore+0x2d/0x50
[ 1243.161066] ? lockdep_hardirqs_on+0x79/0x100
[ 1243.161066] schedule+0x43/0xe0
[ 1243.161066] pipe_read+0x30b/0x450
[ 1243.161066] ? wait_woken+0x80/0x80
[ 1243.161066] new_sync_read+0x164/0x170
[ 1243.161066] vfs_read+0x122/0x1b0
[ 1243.161066] ksys_read+0x93/0xd0
[ 1243.161066] do_syscall_64+0x35/0x80
[ 1243.161066] entry_SYSCALL_64_after_hwframe+0x44/0xae
The oops can also be reproduced with the following steps:
./vmtest.sh -s
# at qemu shell
cd /root/bpf && while true; do ./test_progs -t send_signal
Further analysis showed that the failure is introduced with
commit b89fbfbb854c ("bpf: Implement minimal BPF perf link").
With the above commit, the following scenario becomes possible:
cpu1 cpu2
hrtimer_interrupt -> bpf_overflow_handler
(due to closing link_fd)
bpf_perf_link_release ->
perf_event_free_bpf_prog ->
perf_event_free_bpf_handler ->
WRITE_ONCE(event->overflow_handler, event->orig_overflow_handler)
event->prog = NULL
bpf_prog_run(event->prog, &ctx)
In the above case, the event->prog is NULL for bpf_prog_run, hence
causing oops.
To fix the issue, check whether event->prog is NULL or not. If it
is, do not call bpf_prog_run. This seems working as the above
reproducible step runs more than one hour and I didn't see any
failures.
Fixes: b89fbfbb854c ("bpf: Implement minimal BPF perf link")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210819155209.1927994-1-yhs@fb.com
|
|
Add ability for users to specify custom u64 value (bpf_cookie) when creating
BPF link for perf_event-backed BPF programs (kprobe/uprobe, perf_event,
tracepoints).
This is useful for cases when the same BPF program is used for attaching and
processing invocation of different tracepoints/kprobes/uprobes in a generic
fashion, but such that each invocation is distinguished from each other (e.g.,
BPF program can look up additional information associated with a specific
kernel function without having to rely on function IP lookups). This enables
new use cases to be implemented simply and efficiently that previously were
possible only through code generation (and thus multiple instances of almost
identical BPF program) or compilation at runtime (BCC-style) on target hosts
(even more expensive resource-wise). For uprobes it is not even possible in
some cases to know function IP before hand (e.g., when attaching to shared
library without PID filtering, in which case base load address is not known
for a library).
This is done by storing u64 bpf_cookie in struct bpf_prog_array_item,
corresponding to each attached and run BPF program. Given cgroup BPF programs
already use two 8-byte pointers for their needs and cgroup BPF programs don't
have (yet?) support for bpf_cookie, reuse that space through union of
cgroup_storage and new bpf_cookie field.
Make it available to kprobe/tracepoint BPF programs through bpf_trace_run_ctx.
This is set by BPF_PROG_RUN_ARRAY, used by kprobe/uprobe/tracepoint BPF
program execution code, which luckily is now also split from
BPF_PROG_RUN_ARRAY_CG. This run context will be utilized by a new BPF helper
giving access to this user-provided cookie value from inside a BPF program.
Generic perf_event BPF programs will access this value from perf_event itself
through passed in BPF program context.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/bpf/20210815070609.987780-6-andrii@kernel.org
|
|
Introduce a new type of BPF link - BPF perf link. This brings perf_event-based
BPF program attachments (perf_event, tracepoints, kprobes, and uprobes) into
the common BPF link infrastructure, allowing to list all active perf_event
based attachments, auto-detaching BPF program from perf_event when link's FD
is closed, get generic BPF link fdinfo/get_info functionality.
BPF_LINK_CREATE command expects perf_event's FD as target_fd. No extra flags
are currently supported.
Force-detaching and atomic BPF program updates are not yet implemented, but
with perf_event-based BPF links we now have common framework for this without
the need to extend ioctl()-based perf_event interface.
One interesting consideration is a new value for bpf_attach_type, which
BPF_LINK_CREATE command expects. Generally, it's either 1-to-1 mapping from
bpf_attach_type to bpf_prog_type, or many-to-1 mapping from a subset of
bpf_attach_types to one bpf_prog_type (e.g., see BPF_PROG_TYPE_SK_SKB or
BPF_PROG_TYPE_CGROUP_SOCK). In this case, though, we have three different
program types (KPROBE, TRACEPOINT, PERF_EVENT) using the same perf_event-based
mechanism, so it's many bpf_prog_types to one bpf_attach_type. I chose to
define a single BPF_PERF_EVENT attach type for all of them and adjust
link_create()'s logic for checking correspondence between attach type and
program type.
The alternative would be to define three new attach types (e.g., BPF_KPROBE,
BPF_TRACEPOINT, and BPF_PERF_EVENT), but that seemed like unnecessary overkill
and BPF_KPROBE will cause naming conflicts with BPF_KPROBE() macro, defined by
libbpf. I chose to not do this to avoid unnecessary proliferation of
bpf_attach_type enum values and not have to deal with naming conflicts.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/bpf/20210815070609.987780-5-andrii@kernel.org
|
|
Make internal perf_event_set_bpf_prog() use struct bpf_prog pointer as an
input argument, which makes it easier to re-use for other internal uses
(coming up for BPF link in the next patch). BPF program FD is not as
convenient and in some cases it's not available. So switch to struct bpf_prog,
move out refcounting outside and let caller do bpf_prog_put() in case of an
error. This follows the approach of most of the other BPF internal functions.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210815070609.987780-4-andrii@kernel.org
|
|
Turn BPF_PROG_RUN into a proper always inlined function. No functional and
performance changes are intended, but it makes it much easier to understand
what's going on with how BPF programs are actually get executed. It's more
obvious what types and callbacks are expected. Also extra () around input
parameters can be dropped, as well as `__` variable prefixes intended to avoid
naming collisions, which makes the code simpler to read and write.
This refactoring also highlighted one extra issue. BPF_PROG_RUN is both
a macro and an enum value (BPF_PROG_RUN == BPF_PROG_TEST_RUN). Turning
BPF_PROG_RUN into a function causes naming conflict compilation error. So
rename BPF_PROG_RUN into lower-case bpf_prog_run(), similar to
bpf_prog_run_xdp(), bpf_prog_run_pin_on_cpu(), etc. All existing callers of
BPF_PROG_RUN, the macro, are switched to bpf_prog_run() explicitly.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210815070609.987780-2-andrii@kernel.org
|
|
Refactor the permission check in perf_event_open() into a helper
perf_check_permission(). This makes the permission check logic more
readable (because we no longer have a negated disjunction). Add a
comment mentioning the ptrace check also checks the uid.
No functional change intended.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://lore.kernel.org/r/20210705084453.2151729-2-elver@google.com
|
|
If perf_event_open() is called with another task as target and
perf_event_attr::sigtrap is set, and the target task's user does not
match the calling user, also require the CAP_KILL capability or
PTRACE_MODE_ATTACH permissions.
Otherwise, with the CAP_PERFMON capability alone it would be possible
for a user to send SIGTRAP signals via perf events to another user's
tasks. This could potentially result in those tasks being terminated if
they cannot handle SIGTRAP signals.
Note: The check complements the existing capability check, but is not
supposed to supersede the ptrace_may_access() check. At a high level we
now have:
capable of CAP_PERFMON and (CAP_KILL if sigtrap)
OR
ptrace_may_access(...) // also checks for same thread-group and uid
Fixes: 97ba62b27867 ("perf: Add support for SIGTRAP on perf events")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org> # 5.13+
Link: https://lore.kernel.org/r/20210705084453.2151729-1-elver@google.com
|
|
Merge misc updates from Andrew Morton:
"191 patches.
Subsystems affected by this patch series: kthread, ia64, scripts,
ntfs, squashfs, ocfs2, kernel/watchdog, and mm (gup, pagealloc, slab,
slub, kmemleak, dax, debug, pagecache, gup, swap, memcg, pagemap,
mprotect, bootmem, dma, tracing, vmalloc, kasan, initialization,
pagealloc, and memory-failure)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (191 commits)
mm,hwpoison: make get_hwpoison_page() call get_any_page()
mm,hwpoison: send SIGBUS with error virutal address
mm/page_alloc: split pcp->high across all online CPUs for cpuless nodes
mm/page_alloc: allow high-order pages to be stored on the per-cpu lists
mm: replace CONFIG_FLAT_NODE_MEM_MAP with CONFIG_FLATMEM
mm: replace CONFIG_NEED_MULTIPLE_NODES with CONFIG_NUMA
docs: remove description of DISCONTIGMEM
arch, mm: remove stale mentions of DISCONIGMEM
mm: remove CONFIG_DISCONTIGMEM
m68k: remove support for DISCONTIGMEM
arc: remove support for DISCONTIGMEM
arc: update comment about HIGHMEM implementation
alpha: remove DISCONTIGMEM and NUMA
mm/page_alloc: move free_the_page
mm/page_alloc: fix counting of managed_pages
mm/page_alloc: improve memmap_pages dbg msg
mm: drop SECTION_SHIFT in code comments
mm/page_alloc: introduce vm.percpu_pagelist_high_fraction
mm/page_alloc: limit the number of pages on PCP lists when reclaim is active
mm/page_alloc: scale the number of pages that are batch freed
...
|
|
Use vma_lookup() to find the VMA at a specific address. As vma_lookup()
will return NULL if the address is not within any VMA, the start address
no longer needs to be validated.
Link: https://lkml.kernel.org/r/20210521174745.2219620-17-Liam.Howlett@Oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "perf/binfmt/mm: remove in-tree usage of MAP_EXECUTABLE".
Stumbling over the history of MAP_EXECUTABLE, I noticed that we still have
some in-tree users that we can get rid of.
This patch (of 3):
Before commit e9714acf8c43 ("mm: kill vma flag VM_EXECUTABLE and
mm->num_exe_file_vmas"), VM_EXECUTABLE indicated MAP_EXECUTABLE.
MAP_EXECUTABLE is nowadays essentially ignored by the kernel and does not
relate to VM_MAYEXEC.
Link: https://lkml.kernel.org/r/20210421093453.6904-1-david@redhat.com
Link: https://lkml.kernel.org/r/20210421093453.6904-2-david@redhat.com
Fixes: f972eb63b100 ("perf: Pass protection and flags bits through mmap2 interface")
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Kevin Brodsky <Kevin.Brodsky@arm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Don Zickus <dzickus@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler udpates from Ingo Molnar:
- Changes to core scheduling facilities:
- Add "Core Scheduling" via CONFIG_SCHED_CORE=y, which enables
coordinated scheduling across SMT siblings. This is a much
requested feature for cloud computing platforms, to allow the
flexible utilization of SMT siblings, without exposing untrusted
domains to information leaks & side channels, plus to ensure more
deterministic computing performance on SMT systems used by
heterogenous workloads.
There are new prctls to set core scheduling groups, which allows
more flexible management of workloads that can share siblings.
- Fix task->state access anti-patterns that may result in missed
wakeups and rename it to ->__state in the process to catch new
abuses.
- Load-balancing changes:
- Tweak newidle_balance for fair-sched, to improve 'memcache'-like
workloads.
- "Age" (decay) average idle time, to better track & improve
workloads such as 'tbench'.
- Fix & improve energy-aware (EAS) balancing logic & metrics.
- Fix & improve the uclamp metrics.
- Fix task migration (taskset) corner case on !CONFIG_CPUSET.
- Fix RT and deadline utilization tracking across policy changes
- Introduce a "burstable" CFS controller via cgroups, which allows
bursty CPU-bound workloads to borrow a bit against their future
quota to improve overall latencies & batching. Can be tweaked via
/sys/fs/cgroup/cpu/<X>/cpu.cfs_burst_us.
- Rework assymetric topology/capacity detection & handling.
- Scheduler statistics & tooling:
- Disable delayacct by default, but add a sysctl to enable it at
runtime if tooling needs it. Use static keys and other
optimizations to make it more palatable.
- Use sched_clock() in delayacct, instead of ktime_get_ns().
- Misc cleanups and fixes.
* tag 'sched-core-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits)
sched/doc: Update the CPU capacity asymmetry bits
sched/topology: Rework CPU capacity asymmetry detection
sched/core: Introduce SD_ASYM_CPUCAPACITY_FULL sched_domain flag
psi: Fix race between psi_trigger_create/destroy
sched/fair: Introduce the burstable CFS controller
sched/uclamp: Fix uclamp_tg_restrict()
sched/rt: Fix Deadline utilization tracking during policy change
sched/rt: Fix RT utilization tracking during policy change
sched: Change task_struct::state
sched,arch: Remove unused TASK_STATE offsets
sched,timer: Use __set_current_state()
sched: Add get_current_state()
sched,perf,kvm: Fix preemption condition
sched: Introduce task_is_running()
sched: Unbreak wakeups
sched/fair: Age the average idle time
sched/cpufreq: Consider reduced CPU capacity in energy calculation
sched/fair: Take thermal pressure into account while estimating energy
thermal/cpufreq_cooling: Update offline CPUs per-cpu thermal_pressure
sched/fair: Return early from update_tg_cfs_load() if delta == 0
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events updates from Ingo Molnar:
- Platform PMU driver updates:
- x86 Intel uncore driver updates for Skylake (SNR) and Icelake (ICX) servers
- Fix RDPMC support
- Fix [extended-]PEBS-via-PT support
- Fix Sapphire Rapids event constraints
- Fix :ppp support on Sapphire Rapids
- Fix fixed counter sanity check on Alder Lake & X86_FEATURE_HYBRID_CPU
- Other heterogenous-PMU fixes
- Kprobes:
- Remove the unused and misguided kprobe::fault_handler callbacks.
- Warn about kprobes taking a page fault.
- Fix the 'nmissed' stat counter.
- Misc cleanups and fixes.
* tag 'perf-core-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix task context PMU for Hetero
perf/x86/intel: Fix instructions:ppp support in Sapphire Rapids
perf/x86/intel: Add more events requires FRONTEND MSR on Sapphire Rapids
perf/x86/intel: Fix fixed counter check warning for some Alder Lake
perf/x86/intel: Fix PEBS-via-PT reload base value for Extended PEBS
perf/x86: Reset the dirty counter to prevent the leak for an RDPMC task
kprobes: Do not increment probe miss count in the fault handler
x86,kprobes: WARN if kprobes tries to handle a fault
kprobes: Remove kprobe::fault_handler
uprobes: Update uprobe_write_opcode() kernel-doc comment
perf/hw_breakpoint: Fix DocBook warnings in perf hw_breakpoint
perf/core: Fix DocBook warnings
perf/core: Make local function perf_pmu_snapshot_aux() static
perf/x86/intel/uncore: Enable I/O stacks to IIO PMON mapping on ICX
perf/x86/intel/uncore: Enable I/O stacks to IIO PMON mapping on SNR
perf/x86/intel/uncore: Generalize I/O stacks to PMON mapping procedure
perf/x86/intel/uncore: Drop unnecessary NULL checks after container_of()
|
|
On HETEROGENEOUS hardware (ARM big.Little, Intel Alderlake etc.) each
CPU might have a different hardware PMU. Since each such PMU is
represented by a different struct pmu, but we only have a single HW
task context.
That means that the task context needs to switch PMU type when it
switches CPUs.
Not doing this means that ctx->pmu calls (pmu_{dis,en}able(),
{start,commit,cancel}_txn() etc.) are called against the wrong PMU and
things will go wobbly.
Fixes: f83d2f91d259 ("perf/x86/intel: Add Alder Lake Hybrid support")
Reported-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lkml.kernel.org/r/YMsy7BuGT8nBTspT@hirez.programming.kicks-ass.net
|
|
When ran from the sched-out path (preempt_notifier or perf_event),
p->state is irrelevant to determine preemption. You can get preempted
with !task_is_running() just fine.
The right indicator for preemption is if the task is still on the
runqueue in the sched-out path.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210611082838.285099381@infradead.org
|
|
commit 6d43743e9079 ("Uprobe: Additional argument arch_uprobe to
uprobe_write_opcode()") added the parameter @auprobe.
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210524041411.157027-1-hqjagain@gmail.com
|
|
KCSAN reports a data race between increment and decrement of pin_count:
write to 0xffff888237c2d4e0 of 4 bytes by task 15740 on cpu 1:
find_get_context kernel/events/core.c:4617
__do_sys_perf_event_open kernel/events/core.c:12097 [inline]
__se_sys_perf_event_open kernel/events/core.c:11933
...
read to 0xffff888237c2d4e0 of 4 bytes by task 15743 on cpu 0:
perf_unpin_context kernel/events/core.c:1525 [inline]
__do_sys_perf_event_open kernel/events/core.c:12328 [inline]
__se_sys_perf_event_open kernel/events/core.c:11933
...
Because neither read-modify-write here is atomic, this can lead to one
of the operations being lost, resulting in an inconsistent pin_count.
Fix it by adding the missing locking in the CPU-event case.
Fixes: fe4b04fa31a6 ("perf: Cure task_oncpu_function_call() races")
Reported-by: syzbot+142c9018f5962db69c7e@syzkaller.appspotmail.com
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210527104711.2671610-1-elver@google.com
|
|
Fix the following W=1 kernel build warning(s):
kernel/events/hw_breakpoint.c:461: warning: Function parameter or member 'context' not described in 'register_user_hw_breakpoint'
kernel/events/hw_breakpoint.c:560: warning: Function parameter or member 'context' not described in 'register_wide_hw_breakpoint'
Signed-off-by: Haocheng Xie <xiehaocheng.cn@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210527031947.1801-4-xiehaocheng.cn@gmail.com
|
|
Fix the following W=1 kernel build warning(s):
kernel/events/core.c:143: warning: Function parameter or member 'cpu' not described in 'cpu_function_call'
kernel/events/core.c:11924: warning: Function parameter or member 'flags' not described in 'sys_perf_event_open'
kernel/events/core.c:12382: warning: Function parameter or member 'overflow_handler' not described in 'perf_event_create_kernel_counter'
kernel/events/core.c:12382: warning: Function parameter or member 'context' not described in 'perf_event_create_kernel_counter'
Signed-off-by: Haocheng Xie <xiehaocheng.cn@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210527031947.1801-3-xiehaocheng.cn@gmail.com
|
|
Fixes the following W=1 kernel build warning:
kernel/events/core.c:6670:6: warning: no previous prototype for 'perf_pmu_snapshot_aux' [-Wmissing-prototypes]
Signed-off-by: Haocheng Xie <xiehaocheng.cn@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210527031947.1801-2-xiehaocheng.cn@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull siginfo fix from Eric Biederman:
"During the merge window an issue with si_perf and the siginfo ABI came
up. The alpha and sparc siginfo structure layout had changed with the
addition of SIGTRAP TRAP_PERF and the new field si_perf.
The reason only alpha and sparc were affected is that they are the
only architectures that use si_trapno.
Looking deeper it was discovered that si_trapno is used for only a few
select signals on alpha and sparc, and that none of the other
_sigfault fields past si_addr are used at all. Which means technically
no regression on alpha and sparc.
While the alignment concerns might be dismissed the abuse of si_errno
by SIGTRAP TRAP_PERF does have the potential to cause regressions in
existing userspace.
While we still have time before userspace starts using and depending
on the new definition siginfo for SIGTRAP TRAP_PERF this set of
changes cleans up siginfo_t.
- The si_trapno field is demoted from magic alpha and sparc status
and made an ordinary union member of the _sigfault member of
siginfo_t. Without moving it of course.
- si_perf is replaced with si_perf_data and si_perf_type ending the
abuse of si_errno.
- Unnecessary additions to signalfd_siginfo are removed"
* 'for-v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
signalfd: Remove SIL_PERF_EVENT fields from signalfd_siginfo
signal: Deliver all of the siginfo perf data in _perf
signal: Factor force_sig_perf out of perf_sigtrap
signal: Implement SIL_FAULT_TRAPNO
siginfo: Move si_trapno inside the union inside _si_fault
|
|
Separate filling in siginfo for TRAP_PERF from deciding that
siginal needs to be sent.
There are enough little details that need to be correct when
properly filling in siginfo_t that it is easy to make mistakes
if filling in the siginfo_t is in the same function with other
logic. So factor out force_sig_perf to reduce the cognative
load of on reviewers, maintainers and implementors.
v1: https://lkml.kernel.org/r/m17dkjqqxz.fsf_-_@fess.ebiederm.org
v2: https://lkml.kernel.org/r/20210505141101.11519-10-ebiederm@xmission.com
Link: https://lkml.kernel.org/r/20210517195748.8880-3-ebiederm@xmission.com
Reviewed-by: Marco Elver <elver@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Pull kvm updates from Paolo Bonzini:
"This is a large update by KVM standards, including AMD PSP (Platform
Security Processor, aka "AMD Secure Technology") and ARM CoreSight
(debug and trace) changes.
ARM:
- CoreSight: Add support for ETE and TRBE
- Stage-2 isolation for the host kernel when running in protected
mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
x86:
- AMD PSP driver changes
- Optimizations and cleanup of nested SVM code
- AMD: Support for virtual SPEC_CTRL
- Optimizations of the new MMU code: fast invalidation, zap under
read lock, enable/disably dirty page logging under read lock
- /dev/kvm API for AMD SEV live migration (guest API coming soon)
- support SEV virtual machines sharing the same encryption context
- support SGX in virtual machines
- add a few more statistics
- improved directed yield heuristics
- Lots and lots of cleanups
Generic:
- Rework of MMU notifier interface, simplifying and optimizing the
architecture-specific code
- a handful of "Get rid of oprofile leftovers" patches
- Some selftests improvements"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (379 commits)
KVM: selftests: Speed up set_memory_region_test
selftests: kvm: Fix the check of return value
KVM: x86: Take advantage of kvm_arch_dy_has_pending_interrupt()
KVM: SVM: Skip SEV cache flush if no ASIDs have been used
KVM: SVM: Remove an unnecessary prototype declaration of sev_flush_asids()
KVM: SVM: Drop redundant svm_sev_enabled() helper
KVM: SVM: Move SEV VMCB tracking allocation to sev.c
KVM: SVM: Explicitly check max SEV ASID during sev_hardware_setup()
KVM: SVM: Unconditionally invoke sev_hardware_teardown()
KVM: SVM: Enable SEV/SEV-ES functionality by default (when supported)
KVM: SVM: Condition sev_enabled and sev_es_enabled on CONFIG_KVM_AMD_SEV=y
KVM: SVM: Append "_enabled" to module-scoped SEV/SEV-ES control variables
KVM: SEV: Mask CPUID[0x8000001F].eax according to supported features
KVM: SVM: Move SEV module params/variables to sev.c
KVM: SVM: Disable SEV/SEV-ES if NPT is disabled
KVM: SVM: Free sev_asid_bitmap during init if SEV setup fails
KVM: SVM: Zero out the VMCB array used to track SEV ASID association
x86/sev: Drop redundant and potentially misleading 'sev_enabled'
KVM: x86: Move reverse CPUID helpers to separate header file
KVM: x86: Rename GPR accessors to make mode-aware variants the defaults
...
|
|
perf_pmu_name() and perf_num_counters() are unused. Drop them.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210414134409.1266357-6-maz@kernel.org
|
|
Current Hardware events and Hardware cache events have special perf
types, PERF_TYPE_HARDWARE and PERF_TYPE_HW_CACHE. The two types don't
pass the PMU type in the user interface. For a hybrid system, the perf
subsystem doesn't know which PMU the events belong to. The first capable
PMU will always be assigned to the events. The events never get a chance
to run on the other capable PMUs.
Extend the two types to become PMU aware types. The PMU type ID is
stored at attr.config[63:32].
Add a new PMU capability, PERF_PMU_CAP_EXTENDED_HW_TYPE, to indicate a
PMU which supports the extended PERF_TYPE_HARDWARE and
PERF_TYPE_HW_CACHE.
The PMU type is only required when searching a specific PMU. The PMU
specific codes will only be interested in the 'real' config value, which
is stored in the low 32 bit of the event->attr.config. Update the
event->attr.config in the generic code, so the PMU specific codes don't
need to calculate it separately.
If a user specifies a PMU type, but the PMU doesn't support the extended
type, error out.
If an event cannot be initialized in a PMU specified by a user, error
out immediately. Perf should not try to open it on other PMUs.
The new PMU capability is only set for the X86 hybrid PMUs for now.
Other architectures, e.g., ARM, may need it as well. The support on ARM
may be implemented later separately.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1618237865-33448-22-git-send-email-kan.liang@linux.intel.com
|
|
Adds bit perf_event_attr::sigtrap, which can be set to cause events to
send SIGTRAP (with si_code TRAP_PERF) to the task where the event
occurred. The primary motivation is to support synchronous signals on
perf events in the task where an event (such as breakpoints) triggered.
To distinguish perf events based on the event type, the type is set in
si_errno. For events that are associated with an address, si_addr is
copied from perf_sample_data.
The new field perf_event_attr::sig_data is copied to si_perf, which
allows user space to disambiguate which event (of the same type)
triggered the signal. For example, user space could encode the relevant
information it cares about in sig_data.
We note that the choice of an opaque u64 provides the simplest and most
flexible option. Alternatives where a reference to some user space data
is passed back suffer from the problem that modification of referenced
data (be it the event fd, or the perf_event_attr) can race with the
signal being delivered (of course, the same caveat applies if user space
decides to store a pointer in sig_data, but the ABI explicitly avoids
prescribing such a design).
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://lore.kernel.org/lkml/YBv3rAT566k+6zjg@hirez.programming.kicks-ass.net/
|
|
Adds bit perf_event_attr::remove_on_exec, to support removing an event
from a task on exec.
This option supports the case where an event is supposed to be
process-wide only, and should not propagate beyond exec, to limit
monitoring to the original process image only.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210408103605.1676875-5-elver@google.com
|
|
Adds bit perf_event_attr::inherit_thread, to restricting inheriting
events only if the child was cloned with CLONE_THREAD.
This option supports the case where an event is supposed to be
process-wide only (including subthreads), but should not propagate
beyond the current process's shared environment.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/YBvj6eJR%2FDY2TsEB@hirez.programming.kicks-ass.net/
|
|
As with other ioctls (such as PERF_EVENT_IOC_{ENABLE,DISABLE}), fix up
handling of PERF_EVENT_IOC_MODIFY_ATTRIBUTES to also apply to children.
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://lkml.kernel.org/r/20210408103605.1676875-3-elver@google.com
|
|
Make perf_event_exit_event() more robust, such that we can use it from
other contexts. Specifically the up and coming remove_on_exec.
For this to work we need to address a few issues. Remove_on_exec will
not destroy the entire context, so we cannot rely on TASK_TOMBSTONE to
disable event_function_call() and we thus have to use
perf_remove_from_context().
When using perf_remove_from_context(), there's two races to consider.
The first is against close(), where we can have concurrent tear-down
of the event. The second is against child_list iteration, which should
not find a half baked event.
To address this, teach perf_remove_from_context() to special case
!ctx->is_active and about DETACH_CHILD.
[ elver@google.com: fix racing parent/child exit in sync_child_event(). ]
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210408103605.1676875-2-elver@google.com
|
|
Currently, we start allocating AUX pages half the size of the total
requested AUX buffer size, ignoring the attr.aux_watermark setting. This,
in turn, makes intel_pt driver disregard the watermark also, as it uses
page order for its SG (ToPA) configuration.
Now, this can be fixed in the intel_pt PMU driver, but seeing as it's the
only one currently making use of high order allocations, there is no
reason not to fix the allocator instead. This way, any other driver
wishing to add this support would not have to worry about this.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210414154955.49603-2-alexander.shishkin@linux.intel.com
|
|
Currently, the lockdown state is queried unconditionally, even though
its result is used only if the PERF_SAMPLE_REGS_INTR bit is set in
attr.sample_type. While that doesn't matter in case of the Lockdown LSM,
it causes trouble with the SELinux's lockdown hook implementation.
SELinux implements the locked_down hook with a check whether the current
task's type has the corresponding "lockdown" class permission
("integrity" or "confidentiality") allowed in the policy. This means
that calling the hook when the access control decision would be ignored
generates a bogus permission check and audit record.
Fix this by checking sample_type first and only calling the hook when
its result would be honored.
Fixes: b0c8fdc7fdb7 ("lockdown: Lock down perf when in confidentiality mode")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Paul Moore <paul@paul-moore.com>
Link: https://lkml.kernel.org/r/20210224215628.192519-1-omosnace@redhat.com
|
|
For cpu events, it'd better allocating them in the corresponding node
memory as they would be mostly accessed by the target cpu. Although
perf tools sets the cpu affinity before calling perf_event_open, there
are places it doesn't (notably perf record) and we should consider
other external users too.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210311115413.444407-2-namhyung@kernel.org
|
|
The kernel can allocate a lot of struct perf_event when profiling. For
example, 256 cpu x 8 events x 20 cgroups = 40K instances of the struct
would be allocated on a large system.
The size of struct perf_event in my setup is 1152 byte. As it's
allocated by kmalloc, the actual allocation size would be rounded up
to 2K.
Then there's 896 byte (~43%) of waste per instance resulting in total
~35MB with 40K instances. We can create a dedicated kmem_cache to
avoid such a big unnecessary memory consumption.
With this change, I can see below (note this machine has 112 cpus).
# grep perf_event /proc/slabinfo
perf_event 224 784 1152 7 2 : tunables 24 12 8 : slabdata 112 112 0
The sixth column is pages-per-slab which is 2, and the fifth column is
obj-per-slab which is 7. Thus actually it can use 1152 x 7 = 8064
byte in the 8K, and wasted memory is (8192 - 8064) / 7 = ~18 byte per
instance.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210311115413.444407-1-namhyung@kernel.org
|
|
I found the ring buffer pages are allocated in the node but the ring
buffer itself is not. Let's convert it to use kzalloc_node() too.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210315033436.682438-1-namhyung@kernel.org
|
|
Sometimes the PMU internal buffers have to be flushed for per-CPU events
during a context switch, e.g., large PEBS. Otherwise, the perf tool may
report samples in locations that do not belong to the process where the
samples are processed in, because PEBS does not tag samples with PID/TID.
The current code only flush the buffers for a per-task event. It doesn't
check a per-CPU event.
Add a new event state flag, PERF_ATTACH_SCHED_CB, to indicate that the
PMU internal buffers have to be flushed for this event during a context
switch.
Add sched_cb_entry and perf_sched_cb_usages back to track the PMU/cpuctx
which is required to be flushed.
Only need to invoke the sched_task() for per-CPU events in this patch.
The per-task events have been handled in perf_event_context_sched_in/out
already.
Fixes: 9c964efa4330 ("perf/x86/intel: Drain the PEBS buffer during context switches")
Reported-by: Gabriel Marin <gmx@google.com>
Originally-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20201130193842.10569-1-kan.liang@linux.intel.com
|
|
Drop repeated words in kernel/events/.
{if, the, that, with, time}
Drop repeated words in kernel/locking/.
{it, no, the}
Drop repeated words in kernel/sched/.
{in, not}
Link: https://lkml.kernel.org/r/20210127023412.26292-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Will Deacon <will@kernel.org> [kernel/locking/]
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
