summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2021-03-04Merge tag 'sound-5.12-rc2' of ↵Linus Torvalds3-1/+8
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Slightly bulky changes are seen at this time, mostly for dealing with the messed up Kconfig for ASoC Intel SOF stuff. The driver and its code was split to each module per platform now, which is far more straightforward. This should cover the randconfig problems, and more importantly, improve the actual device handling as well. Other than that, nothing particular stands out: the HDMI PCM assignment fix for Intel Tigerlake, MIPS n64 error handling fix, and the usual suspects, HD-audio / USB-audio quirks" * tag 'sound-5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits) ALSA: hda/realtek: Apply dual codec quirks for MSI Godlike X570 board ALSA: hda/realtek: Add quirk for Intel NUC 10 ALSA: hda/hdmi: let new platforms assign the pcm slot dynamically ALSA: hda/realtek: Add quirk for Clevo NH55RZQ ALSA: hda: intel-sdw-acpi: add missing include files ALSA: hda: move Intel SoundWire ACPI scan to dedicated module ASoC: SOF: Intel: SoundWire: simplify Kconfig ASoC: SOF: pci: move DSP_CONFIG use to platform-specific drivers ASoC: SOF: pci: split PCI into different drivers ASoC: SOF: ACPI: avoid reverse module dependency ASoC: soc-acpi: allow for partial match in parent name ALSA: hda: intel-nhlt: verify config type ALSA: hda: fix kernel-doc warnings ALSA: usb-audio: Fix Pioneer DJM devices URB_CONTROL request direction to set samplerate ALSA: usb-audio: use Corsair Virtuoso mapping for Corsair Virtuoso SE ALSA: hda/realtek: Enable headset mic of Acer SWIFT with ALC256 ALSA: ctxfi: cthw20k2: fix mask on conf to allow 4 bits ALSA: usb-audio: Allow modifying parameters with succeeding hw_params calls ALSA: usb-audio: Drop bogus dB range in too low level ALSA: usb-audio: Don't abort even if the clock rate differs ...
2021-03-03swap: fix swapfile read/write offsetJens Axboe1-0/+1
We're not factoring in the start of the file for where to write and read the swapfile, which leads to very unfortunate side effects of writing where we should not be... Fixes: 48d15436fde6 ("mm: remove get_swap_bio") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-03-02Merge tag 'tags/sound-sdw-kconfig-fixes' into for-linusTakashi Iwai345-3681/+10187
ALSA/ASoC/SOF/SoundWire: fix Kconfig issues In January, Intel kbuild bot and Arnd Bergmann reported multiple issues with randconfig. This patchset builds on Arnd's suggestions to a) expose ACPI and PCI devices in separate modules, while sof-acpi-dev and sof-pci-dev become helpers. This will result in minor changes required for developers/testers, i.e. modprobe snd-sof-pci will no longer result in a probe. The SOF CI was already updated to deal with this module dependency change and introduction of new modules. b) Fix SOF/SoundWire/DSP_config dependencies by moving the code required to detect SoundWire presence in ACPI tables to sound/hda. Link: https://lore.kernel.org/r/20210302003125.1178419-1-pierre-louis.bossart@linux.intel.com
2021-03-02ALSA: hda: move Intel SoundWire ACPI scan to dedicated modulePierre-Louis Bossart1-0/+2
The ACPI scan capabilities is called from the intel-dspconfig as well as the SOF/HDaudio drivers. This creates dependencies and randconfig issues when HDaudio and SOF/SoundWire are not all configured as modules. To simplify Kconfig dependencies between HDAudio, SoundWire, SOF and intel-dspconfig, move the ACPI scan helpers to a dedicated module. This follows the same idea as NHLT helpers which are already handled as a dedicated module. The only functional change is that the kernel parameter to filter links is now handled by a different module, but that was only provided for developers needing work-arounds for early BIOS releases. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Bard Liao <bard.liao@intel.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20210302003125.1178419-7-pierre-louis.bossart@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-03-02ASoC: soc-acpi: allow for partial match in parent namePierre-Louis Bossart1-1/+1
To change the module dependencies and simplify Kconfigs, we need to introduce new driver names (sof-audio-acpi-intel-byt and sof-audio-acpi-intel-bdw), and move from an exact string match to a partial one. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Bard Liao <bard.liao@intel.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20210302003125.1178419-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-03-02ALSA: hda: intel-nhlt: verify config typePierre-Louis Bossart1-0/+5
Multiple bug reports report issues with the SOF and SST drivers when dealing with single microphone cases. We currently read the DMIC array information unconditionally but we don't check that the configuration type is actually a mic array. When the DMIC link does not rely on a mic array configuration, the recommendation is to check the format information to infer the maximum number of channels, and map this to the number of microphones. This leaves a potential for a mismatch between actual microphones available in hardware and what the ACPI table contains, but we have no other source of information. Note that single microphone configurations can alternatively be handled with a 'mic array' configuration along with a 'vendor-defined' geometry. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201251 BugLink: https://github.com/thesofproject/linux/issues/2725 Fixes: 7a33ea70e1868 ('ALSA: hda: intel-nhlt: handle NHLT VENDOR_DEFINED DMIC geometry') Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20210302000146.1177770-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-03-01Merge branch 'kmap-conversion-for-5.12' of ↵Linus Torvalds1-0/+56
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull kmap conversion updates from David Sterba: "This contains changes regarding kmap API use and eg conversion from kmap_atomic to kmap_local_page. The API belongs to memory management but to save cross-tree dependency headaches we've agreed to take it through the btrfs tree because there are some trivial conversions possible, while the rest will need some time and getting the easy cases out of the way would be convenient. The changes can be grouped: - function exports, new helpers - new VM_BUG_ON for additional verification; it's been discussed if it should be VM_BUG_ON or BUG_ON, the former was chosen due to performance reasons - code replaced by relevant helpers" [ This is an updated version of a request that originally came in during the merge window, but I asked for some updates: https://lore.kernel.org/lkml/cover.1614090658.git.dsterba@suse.com/ which is why this got merge after the merge window closed. - Linus ] * 'kmap-conversion-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: use copy_highpage() instead of 2 kmaps() btrfs: use memcpy_[to|from]_page() and kmap_local_page() mm/highmem: Add VM_BUG_ON() to mem*_page() calls mm/highmem: Introduce memcpy_page(), memmove_page(), and memset_page() mm/highmem: Convert memcpy_[to|from]_page() to kmap_local_page() mm/highmem: Lift memcpy_[to|from]_page to core
2021-02-28Merge tag 'csky-for-linus-5.12-rc1' of git://github.com/c-sky/csky-linuxLinus Torvalds1-0/+1
Pull arch/csky updates from Guo Ren: "Features: - add new memory layout 2.5G(user):1.5G(kernel) - add kmemleak support - reconstruct VDSO framework: add VDSO with GENERIC_GETTIMEOFDAY, GENERIC_TIME_VSYSCALL, HAVE_GENERIC_VDSO - add faulthandler_disabled() check - support (fix) swapon - add (fix) _PAGE_ACCESSED for default pgprot - abort uaccess retries upon fatal signal (from arm) Fixes and optimizations: - fix perf probe failure - fix show_regs doesn't contain regs->usp - remove custom asm/atomic.h implementation - fix barrier design - fix futex SMP implementation - fix asm/cmpxchg.h with correct ordering barrier - cleanup asm/spinlock.h - fix PTE global for 2.5:1.5 virtual memory - remove prologue of page fault handler in entry.S - fix TLB maintenance synchronization problem - add show_tlb for CPU_CK860 debug - fix FAULT_FLAG_XXX param for handle_mm_fault - fix update_mmu_cache called with user io mapping - fix do_page_fault parent irq status - fix a size determination in gpr_get() - pgtable.h: Coding convention - kprobe: Fix code in simulate without 'long' - fix pfn_valid error with wrong max_mapnr - use free_initmem_default() in free_initmem() - fix compile error" * tag 'csky-for-linus-5.12-rc1' of git://github.com/c-sky/csky-linux: (30 commits) csky: Fixup compile error csky: use free_initmem_default() in free_initmem() csky: Fixup pfn_valid error with wrong max_mapnr csky: Add VDSO with GENERIC_GETTIMEOFDAY, GENERIC_TIME_VSYSCALL, HAVE_GENERIC_VDSO csky: kprobe: Fixup code in simulate without 'long' csky: Fixup swapon csky: pgtable.h: Coding convention csky: Fixup _PAGE_ACCESSED for default pgprot csky: remove unused including <linux/version.h> csky: Fix a size determination in gpr_get() csky: Reconstruct VDSO framework csky: mm: abort uaccess retries upon fatal signal csky: Sync riscv mm/fault.c for easy maintenance csky: Fixup do_page_fault parent irq status csky: Add faulthandler_disabled() check csky: Fixup update_mmu_cache called with user io mapping csky: Fixup FAULT_FLAG_XXX param for handle_mm_fault csky: Add show_tlb for CPU_CK860 debug csky: Fix TLB maintenance synchronization problem csky: Add kmemleak support ...
2021-02-28Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds2-2/+5
Pull more SCSI updates from James Bottomley: "This is a few driver updates (iscsi, mpt3sas) that were still in the staging queue when the merge window opened (all committed on or before 8 Feb) and some small bug fixes which came in during the merge window (all committed on 22 Feb)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (30 commits) scsi: hpsa: Correct dev cmds outstanding for retried cmds scsi: sd: Fix Opal support scsi: target: tcmu: Fix memory leak caused by wrong uio usage scsi: target: tcmu: Move some functions without code change scsi: sd: sd_zbc: Don't pass GFP_NOIO to kvcalloc scsi: aic7xxx: Remove unused function pointer typedef ahc_bus_suspend/resume_t scsi: bnx2fc: Fix Kconfig warning & CNIC build errors scsi: ufs: Fix a duplicate dev quirk number scsi: aic79xx: Fix spelling of version scsi: target: core: Prevent underflow for service actions scsi: target: core: Add cmd length set before cmd complete scsi: iscsi: Drop session lock in iscsi_session_chkready() scsi: qla4xxx: Use iscsi_is_session_online() scsi: libiscsi: Reset max/exp cmdsn during recovery scsi: iscsi_tcp: Fix shost can_queue initialization scsi: libiscsi: Add helper to calculate max SCSI cmds per session scsi: libiscsi: Fix iSCSI host workq destruction scsi: libiscsi: Fix iscsi_task use after free() scsi: libiscsi: Drop taskqueuelock scsi: libiscsi: Fix iscsi_prep_scsi_cmd_pdu() error handling ...
2021-02-28Merge tag 'block-5.12-2021-02-27' of git://git.kernel.dk/linux-blockLinus Torvalds5-20/+22
Pull more block updates from Jens Axboe: "A few stragglers (and one due to me missing it originally), and fixes for changes in this merge window mostly. In particular: - blktrace cleanups (Chaitanya, Greg) - Kill dead blk_pm_* functions (Bart) - Fixes for the bio alloc changes (Christoph) - Fix for the partition changes (Christoph, Ming) - Fix for turning off iopoll with polled IO inflight (Jeffle) - nbd disconnect fix (Josef) - loop fsync error fix (Mauricio) - kyber update depth fix (Yang) - max_sectors alignment fix (Mikulas) - Add bio_max_segs helper (Matthew)" * tag 'block-5.12-2021-02-27' of git://git.kernel.dk/linux-block: (21 commits) block: Add bio_max_segs blktrace: fix documentation for blk_fill_rw() block: memory allocations in bounce_clone_bio must not fail block: remove the gfp_mask argument to bounce_clone_bio block: fix bounce_clone_bio for passthrough bios block-crypto-fallback: use a bio_set for splitting bios block: fix logging on capacity change blk-settings: align max_sectors on "logical_block_size" boundary block: reopen the device in blkdev_reread_part block: don't skip empty device in in disk_uevent blktrace: remove debugfs file dentries from struct blk_trace nbd: handle device refs for DESTROY_ON_DISCONNECT properly kyber: introduce kyber_depth_updated() loop: fix I/O error on fsync() in detached loop devices block: fix potential IO hang when turning off io_poll block: get rid of the trace rq insert wrapper blktrace: fix blk_rq_merge documentation blktrace: fix blk_rq_issue documentation blktrace: add blk_fill_rwbs documentation comment block: remove superfluous param in blk_fill_rwbs() ...
2021-02-27Merge tag 'io_uring-worker.v3-2021-02-25' of git://git.kernel.dk/linux-blockLinus Torvalds4-23/+6
Pull io_uring thread rewrite from Jens Axboe: "This converts the io-wq workers to be forked off the tasks in question instead of being kernel threads that assume various bits of the original task identity. This kills > 400 lines of code from io_uring/io-wq, and it's the worst part of the code. We've had several bugs in this area, and the worry is always that we could be missing some pieces for file types doing unusual things (recent /dev/tty example comes to mind, userfaultfd reads installing file descriptors is another fun one... - both of which need special handling, and I bet it's not the last weird oddity we'll find). With these identical workers, we can have full confidence that we're never missing anything. That, in itself, is a huge win. Outside of that, it's also more efficient since we're not wasting space and code on tracking state, or switching between different states. I'm sure we're going to find little things to patch up after this series, but testing has been pretty thorough, from the usual regression suite to production. Any issue that may crop up should be manageable. There's also a nice series of further reductions we can do on top of this, but I wanted to get the meat of it out sooner rather than later. The general worry here isn't that it's fundamentally broken. Most of the little issues we've found over the last week have been related to just changes in how thread startup/exit is done, since that's the main difference between using kthreads and these kinds of threads. In fact, if all goes according to plan, I want to get this into the 5.10 and 5.11 stable branches as well. That said, the changes outside of io_uring/io-wq are: - arch setup, simple one-liner to each arch copy_thread() implementation. - Removal of net and proc restrictions for io_uring, they are no longer needed or useful" * tag 'io_uring-worker.v3-2021-02-25' of git://git.kernel.dk/linux-block: (30 commits) io-wq: remove now unused IO_WQ_BIT_ERROR io_uring: fix SQPOLL thread handling over exec io-wq: improve manager/worker handling over exec io_uring: ensure SQPOLL startup is triggered before error shutdown io-wq: make buffered file write hashed work map per-ctx io-wq: fix race around io_worker grabbing io-wq: fix races around manager/worker creation and task exit io_uring: ensure io-wq context is always destroyed for tasks arch: ensure parisc/powerpc handle PF_IO_WORKER in copy_thread() io_uring: cleanup ->user usage io-wq: remove nr_process accounting io_uring: flag new native workers with IORING_FEAT_NATIVE_WORKERS net: remove cmsg restriction from io_uring based send/recvmsg calls Revert "proc: don't allow async path resolution of /proc/self components" Revert "proc: don't allow async path resolution of /proc/thread-self components" io_uring: move SQPOLL thread io-wq forked worker io-wq: make io_wq_fork_thread() available to other users io-wq: only remove worker from free_list, if it was there io_uring: remove io_identity io_uring: remove any grabbing of context ...
2021-02-27Merge branch 'work.misc' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc vfs updates from Al Viro: "Assorted stuff pile - no common topic here" * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: whack-a-mole: don't open-code iminor/imajor 9p: fix misuse of sscanf() in v9fs_stat2inode() audit_alloc_mark(): don't open-code ERR_CAST() fs/inode.c: make inode_init_always() initialize i_ino to 0 vfs: don't unnecessarily clone write access for writable fds
2021-02-27block: Add bio_max_segsMatthew Wilcox (Oracle)1-1/+6
It's often inconvenient to use BIO_MAX_PAGES due to min() requiring the sign to be the same. Introduce bio_max_segs() and change BIO_MAX_PAGES to be unsigned to make it easier for the users. Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-27Merge tag 'for-linus' of git://github.com/openrisc/linuxLinus Torvalds1-48/+102
Pull OpenRISC updates from Stafford Horne: - Update for Litex SoC controller to support wider width registers as well as reset. - Refactor SMP code to use device tree to define possible cpus. - Update build including generating vmlinux.bin * tag 'for-linus' of git://github.com/openrisc/linux: openrisc: Use devicetree to determine present cpus drivers/soc/litex: Add restart handler openrisc: add arch/openrisc/Kbuild drivers/soc/litex: make 'litex_[set|get]_reg()' methods private drivers/soc/litex: support 32-bit subregisters, 64-bit CPUs drivers/soc/litex: s/LITEX_REG_SIZE/LITEX_SUBREG_ALIGN/g drivers/soc/litex: separate MMIO from subregister offset calculation drivers/soc/litex: move generic accessors to litex.h openrisc: restart: Call common handlers before hanging openrisc: Add vmlinux.bin target
2021-02-27Merge tag 's390-5.12-2' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 updates from Vasily Gorbik: - Fix physical vs virtual confusion in some basic mm macros and routines. Caused by __pa == __va on s390 currently. - Get rid of on-stack cpu masks. - Add support for complete CPU counter set extraction. - Add arch_irq_work_raise implementation. - virtio-ccw revision and opcode fixes. * tag 's390-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/cpumf: Add support for complete counter set extraction virtio/s390: implement virtio-ccw revision 2 correctly s390/smp: implement arch_irq_work_raise() s390/topology: move cpumasks away from stack s390/smp: smp_emergency_stop() - move cpumask away from stack s390/smp: __smp_rescan_cpus() - move cpumask away from stack s390/smp: consolidate locking for smp_rescan() s390/mm: fix phys vs virt confusion in vmem_*() functions family s390/mm: fix phys vs virt confusion in pgtable allocation routines s390/mm: fix invalid __pa() usage in pfn_pXd() macros s390/mm: make pXd_deref() macros return a pointer s390/opcodes: rename selhhhr to selfhr
2021-02-27Merge branch 'stable/for-linus-5.12' of ↵Linus Torvalds3-0/+18
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb Pull swiotlb updates from Konrad Rzeszutek Wilk: "Two memory encryption related patches (SWIOTLB is enabled by default for AMD-SEV): - Add support for alignment so that NVME can properly work - Keep track of requested DMA buffers length, as underlaying hardware devices can trip SWIOTLB to bounce too much and crash the kernel And a tiny fix to use proper APIs in drivers" * 'stable/for-linus-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: swiotlb: Validate bounce size in the sync/unmap path nvme-pci: set min_align_mask swiotlb: respect min_align_mask swiotlb: don't modify orig_addr in swiotlb_tbl_sync_single swiotlb: refactor swiotlb_tbl_map_single swiotlb: clean up swiotlb_tbl_unmap_single swiotlb: factor out a nr_slots helper swiotlb: factor out an io_tlb_offset helper swiotlb: add a IO_TLB_SIZE define driver core: add a min_align_mask field to struct device_dma_parameters sdhci: stop poking into swiotlb internals
2021-02-27Merge tag 'leds-5.12-rc1' of ↵Linus Torvalds3-43/+53
git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds Pull LED updates from Pavel Machek: "Besides the usual fixes and new drivers, we are changing CLASS_FLASH to return success to make it easier to work with V4L2 stuff disabled, and we are getting rid of enum that should have been plain integer long time ago. I'm slightly nervous about potential warnings, but it needed to be fixed at some point" * tag 'leds-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: leds: lp50xx: Get rid of redundant explicit casting leds: lp50xx: Update headers block to reflect reality leds: lp50xx: Get rid of redundant check in lp50xx_enable_disable() leds: lp50xx: Reduce level of dereferences leds: lp50xx: Switch to new style i2c-driver probe function leds: lp50xx: Don't spam logs when probe is deferred leds: apu: extend support for PC Engines APU1 with newer firmware leds: flash: Fix multicolor no-ops registration by return 0 leds: flash: Add flash registration with undefined CONFIG_LEDS_CLASS_FLASH leds: lgm: Add LED controller driver for LGM SoC dt-bindings: leds: Add bindings for Intel LGM SoC leds: led-core: Get rid of enum led_brightness leds: gpio: Set max brightness to 1 leds: lm3533: Switch to using the new API kobj_to_dev() leds: ss4200: simplify the return expression of register_nasgpio_led() leds: Use DEVICE_ATTR_{RW, RO, WO} macros
2021-02-26Merge tag 'riscv-for-linus-5.12-mw0' of ↵Linus Torvalds6-1/+424
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: "A handful of new RISC-V related patches for this merge window: - A check to ensure drivers are properly using uaccess. This isn't manifesting with any of the drivers I'm currently using, but may catch errors in new drivers. - Some preliminary support for the FU740, along with the HiFive Unleashed it will appear on. - NUMA support for RISC-V, which involves making the arm64 code generic. - Support for kasan on the vmalloc region. - A handful of new drivers for the Kendryte K210, along with the DT plumbing required to boot on a handful of K210-based boards. - Support for allocating ASIDs. - Preliminary support for kernels larger than 128MiB. - Various other improvements to our KASAN support, including the utilization of huge pages when allocating the KASAN regions. We may have already found a bug with the KASAN_VMALLOC code, but it's passing my tests. There's a fix in the works, but that will probably miss the merge window. * tag 'riscv-for-linus-5.12-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (75 commits) riscv: Improve kasan population by using hugepages when possible riscv: Improve kasan population function riscv: Use KASAN_SHADOW_INIT define for kasan memory initialization riscv: Improve kasan definitions riscv: Get rid of MAX_EARLY_MAPPING_SIZE soc: canaan: Sort the Makefile alphabetically riscv: Disable KSAN_SANITIZE for vDSO riscv: Remove unnecessary declaration riscv: Add Canaan Kendryte K210 SD card defconfig riscv: Update Canaan Kendryte K210 defconfig riscv: Add Kendryte KD233 board device tree riscv: Add SiPeed MAIXDUINO board device tree riscv: Add SiPeed MAIX GO board device tree riscv: Add SiPeed MAIX DOCK board device tree riscv: Add SiPeed MAIX BiT board device tree riscv: Update Canaan Kendryte K210 device tree dt-bindings: add resets property to dw-apb-timer dt-bindings: fix sifive gpio properties dt-bindings: update sifive uart compatible string dt-bindings: update sifive clint compatible string ...
2021-02-26Merge tag 'arm64-fixes' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "The big one is a fix for the VHE enabling path during early boot, where the code enabling the MMU wasn't necessarily in the identity map of the new page-tables, resulting in a consistent crash with 64k pages. In fixing that, we noticed some missing barriers too, so we added those for the sake of architectural compliance. Other than that, just the usual merge window trickle. There'll be more to come, too. Summary: - Fix lockdep false alarm on resume-from-cpuidle path - Fix memory leak in kexec_file - Fix module linker script to work with GDB - Fix error code when trying to use uprobes with AArch32 instructions - Fix late VHE enabling with 64k pages - Add missing ISBs after TLB invalidation - Fix seccomp when tracing syscall -1 - Fix stacktrace return code at end of stack - Fix inconsistent whitespace for pointer return values - Fix compiler warnings when building with W=1" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: stacktrace: Report when we reach the end of the stack arm64: ptrace: Fix seccomp of traced syscall -1 (NO_SYSCALL) arm64: Add missing ISB after invalidating TLB in enter_vhe arm64: Add missing ISB after invalidating TLB in __primary_switch arm64: VHE: Enable EL2 MMU from the idmap KVM: arm64: make the hyp vector table entries local arm64/mm: Fixed some coding style issues arm64: uprobe: Return EOPNOTSUPP for AARCH32 instruction probing kexec: move machine_kexec_post_load() to public interface arm64 module: set plt* section addresses to 0x0 arm64: kexec_file: fix memory leakage in create_dtb() when fdt_open_into() fails arm64: spectre: Prevent lockdep splat on v4 mitigation enable path
2021-02-26Merge tag 'trace-v5.12-2' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "Two fixes: - Fix an unsafe printf string usage in a kmem trace event - Fix spelling in output from the latency-collector tool" * tag 'trace-v5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing/tools: fix a couple of spelling mistakes mm, tracing: Fix kmem_cache_free trace event to not print stale pointers
2021-02-26Merge tag 'orphan-handling-v5.12-rc1' of ↵Linus Torvalds1-4/+5
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull orphan handling fix from Kees Cook: "Another case of bogus .eh_frame emission was noticed under CONFIG_GCOV_KERNEL=y. Summary: - Define SANITIZER_DISCARDS with CONFIG_GCOV_KERNEL=y (Nathan Chancellor)" * tag 'orphan-handling-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: vmlinux.lds.h: Define SANITIZER_DISCARDS with CONFIG_GCOV_KERNEL=y
2021-02-26Merge tag 'for-linus-5.12b-rc1-tag' of ↵Linus Torvalds1-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull more xen updates from Juergen Gross: - A small series for Xen event channels adding some sysfs nodes for per pv-device settings and statistics, and two fixes of theoretical problems. - two minor fixes (one for an unlikely error path, one for a comment). * tag 'for-linus-5.12b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen-front-pgdir-shbuf: don't record wrong grant handle upon error xen: Replace lkml.org links with lore xen/evtchn: use READ/WRITE_ONCE() for accessing ring indices xen/evtchn: use smp barriers for user event ring xen/events: add per-xenbus device event statistics and settings
2021-02-26Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-1/+24
Pull more KVM updates from Paolo Bonzini: "x86: - take into account HVA before retrying on MMU notifier race - fixes for nested AMD guests without NPT - allow INVPCID in guest without PCID - disable PML in hardware when not in use - MMU code cleanups: * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits) KVM: SVM: Fix nested VM-Exit on #GP interception handling KVM: vmx/pmu: Fix dummy check if lbr_desc->event is created KVM: x86/mmu: Consider the hva in mmu_notifier retry KVM: x86/mmu: Skip mmu_notifier check when handling MMIO page fault KVM: Documentation: rectify rst markup in KVM_GET_SUPPORTED_HV_CPUID KVM: nSVM: prepare guest save area while is_guest_mode is true KVM: x86/mmu: Remove a variety of unnecessary exports KVM: x86: Fold "write-protect large" use case into generic write-protect KVM: x86/mmu: Don't set dirty bits when disabling dirty logging w/ PML KVM: VMX: Dynamically enable/disable PML based on memslot dirty logging KVM: x86: Further clarify the logic and comments for toggling log dirty KVM: x86: Move MMU's PML logic to common code KVM: x86/mmu: Make dirty log size hook (PML) a value, not a function KVM: x86/mmu: Expand on the comment in kvm_vcpu_ad_need_write_protect() KVM: nVMX: Disable PML in hardware when running L2 KVM: x86/mmu: Consult max mapping level when zapping collapsible SPTEs KVM: x86/mmu: Pass the memslot to the rmap callbacks KVM: x86/mmu: Split out max mapping level calculation to helper KVM: x86/mmu: Expand collapsible SPTE zap for TDP MMU to ZONE_DEVICE and HugeTLB pages KVM: nVMX: no need to undo inject_page_fault change on nested vmexit ...
2021-02-26Merge branch 'akpm' (patches from Andrew)Linus Torvalds32-345/+728
Merge more updates from Andrew Morton: "118 patches: - The rest of MM. Includes kfence - another runtime memory validator. Not as thorough as KASAN, but it has unmeasurable overhead and is intended to be usable in production builds. - Everything else Subsystems affected by this patch series: alpha, procfs, sysctl, misc, core-kernel, MAINTAINERS, lib, bitops, checkpatch, init, coredump, seq_file, gdb, ubsan, initramfs, and mm (thp, cma, vmstat, memory-hotplug, mlock, rmap, zswap, zsmalloc, cleanups, kfence, kasan2, and pagemap2)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits) MIPS: make userspace mapping young by default initramfs: panic with memory information ubsan: remove overflow checks kgdb: fix to kill breakpoints on initmem after boot scripts/gdb: fix list_for_each x86: fix seq_file iteration for pat/memtype.c seq_file: document how per-entry resources are managed. fs/coredump: use kmap_local_page() init/Kconfig: fix a typo in CC_VERSION_TEXT help text init: clean up early_param_on_off() macro init/version.c: remove Version_<LINUX_VERSION_CODE> symbol checkpatch: do not apply "initialise globals to 0" check to BPF progs checkpatch: don't warn about colon termination in linker scripts checkpatch: add kmalloc_array_node to unnecessary OOM message check checkpatch: add warning for avoiding .L prefix symbols in assembly files checkpatch: improve TYPECAST_INT_CONSTANT test message checkpatch: prefer ftrace over function entry/exit printks checkpatch: trivial style fixes checkpatch: ignore warning designated initializers using NR_CPUS checkpatch: improve blank line after declaration test ...
2021-02-26MIPS: make userspace mapping young by defaultHuang Pei1-8/+0
MIPS page fault path(except huge page) takes 3 exceptions (1 TLB Miss + 2 TLB Invalid), butthe second TLB Invalid exception is just triggered by __update_tlb from do_page_fault writing tlb without _PAGE_VALID set. With this patch, user space mapping prot is made young by default (with both _PAGE_VALID and _PAGE_YOUNG set), and it only take 1 TLB Miss + 1 TLB Invalid exception Remove pte_sw_mkyoung without polluting MM code and make page fault delay of MIPS on par with other architecture Link: https://lkml.kernel.org/r/20210204013942.8398-1-huangpei@loongson.cn Signed-off-by: Huang Pei <huangpei@loongson.cn> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: <huangpei@loongson.cn> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: <ambrosehua@gmail.com> Cc: Bibo Mao <maobibo@loongson.cn> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: Paul Burton <paulburton@kernel.org> Cc: Li Xuefeng <lixuefeng@loongson.cn> Cc: Yang Tiezhu <yangtiezhu@loongson.cn> Cc: Gao Juxin <gaojuxin@loongson.cn> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Huacai Chen <chenhc@lemote.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26kgdb: fix to kill breakpoints on initmem after bootSumit Garg1-0/+2
Currently breakpoints in kernel .init.text section are not handled correctly while allowing to remove them even after corresponding pages have been freed. Fix it via killing .init.text section breakpoints just prior to initmem pages being freed. Doug: "HW breakpoints aren't handled by this patch but it's probably not such a big deal". Link: https://lkml.kernel.org/r/20210224081652.587785-1-sumit.garg@linaro.org Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Suggested-by: Doug Anderson <dianders@chromium.org> Acked-by: Doug Anderson <dianders@chromium.org> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Tested-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26init: clean up early_param_on_off() macroMasahiro Yamada1-2/+2
Use early_param() to define early_param_on_off(). Link: https://lkml.kernel.org/r/20210201041532.4025025-1-masahiroy@kernel.org Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Johan Hovold <johan@kernel.org> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Joe Perches <joe@perches.com> Cc: Nick Desaulniers <ndesaulniers@gooogle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26include/linux/bitops.h: spelling s/synomyn/synonym/Geert Uytterhoeven1-1/+1
Fix a misspelling of "synonym". Link: https://lkml.kernel.org/r/20210108105305.2028120-1-geert+renesas@glider.be Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26lib: stackdepot: add support to disable stack depotVijayanand Jitta1-0/+9
Add a kernel parameter stack_depot_disable to disable stack depot. So that stack hash table doesn't consume any memory when stack depot is disabled. The use case is CONFIG_PAGE_OWNER without page_owner=on. Without this patch, stackdepot will consume the memory for the hashtable. By default, it's 8M which is never trivial. With this option, in CONFIG_PAGE_OWNER configured system, page_owner=off, stack_depot_disable in kernel command line, we could save the wasted memory for the hashtable. [akpm@linux-foundation.org: fix CONFIG_STACKDEPOT=n build] Link: https://lkml.kernel.org/r/1611749198-24316-2-git-send-email-vjitta@codeaurora.org Signed-off-by: Vinayak Menon <vinmenon@codeaurora.org> Signed-off-by: Vijayanand Jitta <vjitta@codeaurora.org> Cc: Alexander Potapenko <glider@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Yogesh Lal <ylal@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26string.h: move fortified functions definitions in a dedicated header.Francis Laniel2-281/+303
This patch adds fortify-string.h to contain fortified functions definitions. Thus, the code is more separated and compile time is approximately 1% faster for people who do not set CONFIG_FORTIFY_SOURCE. Link: https://lkml.kernel.org/r/20210111092141.22946-1-laniel_francis@privacyrequired.com Link: https://lkml.kernel.org/r/20210111092141.22946-2-laniel_francis@privacyrequired.com Signed-off-by: Francis Laniel <laniel_francis@privacyrequired.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26groups: use flexible-array member in struct group_infoHubert Jasudowicz1-1/+1
Replace zero-size array with flexible array member, as recommended by the docs. Link: https://lkml.kernel.org/r/155995eed35c3c1bdcc56e69d8997c8e4c46740a.1611620846.git.hubert.jasudowicz@gmail.com Signed-off-by: Hubert Jasudowicz <hubert.jasudowicz@gmail.com> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: Micah Morton <mortonm@chromium.org> Cc: Gao Xiang <xiang@kernel.org> Cc: Michael Kelley <mikelley@microsoft.com> Cc: Thomas Cedeno <thomascedeno@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26treewide: Miguel has movedMiguel Ojeda2-2/+2
Update contact info. Link: https://lkml.kernel.org/r/20210206162524.GA11520@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26include/linux: remove repeated wordsRandy Dunlap4-4/+4
Drop the doubled word "for" in a comment. {firewire-cdev.h} Drop the doubled word "in" in a comment. {input.h} Drop the doubled word "a" in a comment. {mdev.h} Drop the doubled word "the" in a comment. {ptrace.h} Link: https://lkml.kernel.org/r/20210126232444.22861-1-rdunlap@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Kirti Wankhede <kwankhede@nvidia.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26kasan: unify large kfree checksAndrey Konovalov1-8/+8
Unify checks in kasan_kfree_large() and in kasan_slab_free_mempool() for large allocations as it's done for small kfree() allocations. With this change, kasan_slab_free_mempool() starts checking that the first byte of the memory that's being freed is accessible. Link: https://lkml.kernel.org/r/14ffc4cd867e0b1ed58f7527e3b748a1b4ad08aa.1612546384.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26kasan, mm: don't save alloc stacks twiceAndrey Konovalov1-0/+9
Patch series "kasan: optimizations and fixes for HW_TAGS", v4. This patchset makes the HW_TAGS mode more efficient, mostly by reworking poisoning approaches and simplifying/inlining some internal helpers. With this change, the overhead of HW_TAGS annotations excluding setting and checking memory tags is ~3%. The performance impact caused by tags will be unknown until we have hardware that supports MTE. As a side-effect, this patchset speeds up generic KASAN by ~15%. This patch (of 13): Currently KASAN saves allocation stacks in both kasan_slab_alloc() and kasan_kmalloc() annotations. This patch changes KASAN to save allocation stacks for slab objects from kmalloc caches in kasan_kmalloc() only, and stacks for other slab objects in kasan_slab_alloc() only. This change requires ____kasan_kmalloc() knowing whether the object belongs to a kmalloc cache. This is implemented by adding a flag field to the kasan_info structure. That flag is only set for kmalloc caches via a new kasan_cache_create_kmalloc() annotation. Link: https://lkml.kernel.org/r/cover.1612546384.git.andreyknvl@google.com Link: https://lkml.kernel.org/r/7c673ebca8d00f40a7ad6f04ab9a2bddeeae2097.1612546384.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26tracing: add error_report_end trace pointAlexander Potapenko1-0/+74
Patch series "Add error_report_end tracepoint to KFENCE and KASAN", v3. This patchset adds a tracepoint, error_repor_end, that is to be used by KFENCE, KASAN, and potentially other bug detection tools, when they print an error report. One of the possible use cases is userspace collection of kernel error reports: interested parties can subscribe to the tracing event via tracefs, and get notified when an error report occurs. This patch (of 3): Introduce error_report_end tracepoint. It can be used in debugging tools like KASAN, KFENCE, etc. to provide extensions to the error reporting mechanisms (e.g. allow tests hook into error reporting, ease error report collection from production kernels). Another benefit would be making use of ftrace for debugging or benchmarking the tools themselves. Should we need it, the tracepoint name leaves us with the possibility to introduce a complementary error_report_start tracepoint in the future. Link: https://lkml.kernel.org/r/20210121131915.1331302-1-glider@google.com Link: https://lkml.kernel.org/r/20210121131915.1331302-2-glider@google.com Signed-off-by: Alexander Potapenko <glider@google.com> Suggested-by: Marco Elver <elver@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26kfence: add test suiteMarco Elver1-2/+7
Add KFENCE test suite, testing various error detection scenarios. Makes use of KUnit for test organization. Since KFENCE's interface to obtain error reports is via the console, the test verifies that KFENCE outputs expected reports to the console. [elver@google.com: fix typo in test] Link: https://lkml.kernel.org/r/X9lHQExmHGvETxY4@elver.google.com [elver@google.com: show access type in report] Link: https://lkml.kernel.org/r/20210111091544.3287013-2-elver@google.com Link: https://lkml.kernel.org/r/20201103175841.3495947-9-elver@google.com Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Marco Elver <elver@google.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Co-developed-by: Alexander Potapenko <glider@google.com> Reviewed-by: Jann Horn <jannh@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christopher Lameter <cl@linux.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hillf Danton <hdanton@sina.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joern Engel <joern@purestorage.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kees Cook <keescook@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: SeongJae Park <sjpark@amazon.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26mm, kfence: insert KFENCE hooks for SLUBAlexander Potapenko1-0/+3
Inserts KFENCE hooks into the SLUB allocator. To pass the originally requested size to KFENCE, add an argument 'orig_size' to slab_alloc*(). The additional argument is required to preserve the requested original size for kmalloc() allocations, which uses size classes (e.g. an allocation of 272 bytes will return an object of size 512). Therefore, kmem_cache::size does not represent the kmalloc-caller's requested size, and we must introduce the argument 'orig_size' to propagate the originally requested size to KFENCE. Without the originally requested size, we would not be able to detect out-of-bounds accesses for objects placed at the end of a KFENCE object page if that object is not equal to the kmalloc-size class it was bucketed into. When KFENCE is disabled, there is no additional overhead, since slab_alloc*() functions are __always_inline. Link: https://lkml.kernel.org/r/20201103175841.3495947-6-elver@google.com Signed-off-by: Marco Elver <elver@google.com> Signed-off-by: Alexander Potapenko <glider@google.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Jann Horn <jannh@google.com> Co-developed-by: Marco Elver <elver@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christopher Lameter <cl@linux.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hillf Danton <hdanton@sina.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joern Engel <joern@purestorage.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kees Cook <keescook@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: SeongJae Park <sjpark@amazon.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26mm, kfence: insert KFENCE hooks for SLABAlexander Potapenko1-0/+3
Inserts KFENCE hooks into the SLAB allocator. To pass the originally requested size to KFENCE, add an argument 'orig_size' to slab_alloc*(). The additional argument is required to preserve the requested original size for kmalloc() allocations, which uses size classes (e.g. an allocation of 272 bytes will return an object of size 512). Therefore, kmem_cache::size does not represent the kmalloc-caller's requested size, and we must introduce the argument 'orig_size' to propagate the originally requested size to KFENCE. Without the originally requested size, we would not be able to detect out-of-bounds accesses for objects placed at the end of a KFENCE object page if that object is not equal to the kmalloc-size class it was bucketed into. When KFENCE is disabled, there is no additional overhead, since slab_alloc*() functions are __always_inline. Link: https://lkml.kernel.org/r/20201103175841.3495947-5-elver@google.com Signed-off-by: Marco Elver <elver@google.com> Signed-off-by: Alexander Potapenko <glider@google.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Co-developed-by: Marco Elver <elver@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hillf Danton <hdanton@sina.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Joern Engel <joern@purestorage.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kees Cook <keescook@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: SeongJae Park <sjpark@amazon.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26kfence: use pt_regs to generate stack trace on faultsMarco Elver1-2/+3
Instead of removing the fault handling portion of the stack trace based on the fault handler's name, just use struct pt_regs directly. Change kfence_handle_page_fault() to take a struct pt_regs, and plumb it through to kfence_report_error() for out-of-bounds, use-after-free, or invalid access errors, where pt_regs is used to generate the stack trace. If the kernel is a DEBUG_KERNEL, also show registers for more information. Link: https://lkml.kernel.org/r/20201105092133.2075331-1-elver@google.com Signed-off-by: Marco Elver <elver@google.com> Suggested-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Jann Horn <jannh@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26mm: add Kernel Electric-Fence infrastructureAlexander Potapenko1-0/+216
Patch series "KFENCE: A low-overhead sampling-based memory safety error detector", v7. This adds the Kernel Electric-Fence (KFENCE) infrastructure. KFENCE is a low-overhead sampling-based memory safety error detector of heap use-after-free, invalid-free, and out-of-bounds access errors. This series enables KFENCE for the x86 and arm64 architectures, and adds KFENCE hooks to the SLAB and SLUB allocators. KFENCE is designed to be enabled in production kernels, and has near zero performance overhead. Compared to KASAN, KFENCE trades performance for precision. The main motivation behind KFENCE's design, is that with enough total uptime KFENCE will detect bugs in code paths not typically exercised by non-production test workloads. One way to quickly achieve a large enough total uptime is when the tool is deployed across a large fleet of machines. KFENCE objects each reside on a dedicated page, at either the left or right page boundaries. The pages to the left and right of the object page are "guard pages", whose attributes are changed to a protected state, and cause page faults on any attempted access to them. Such page faults are then intercepted by KFENCE, which handles the fault gracefully by reporting a memory access error. Guarded allocations are set up based on a sample interval (can be set via kfence.sample_interval). After expiration of the sample interval, the next allocation through the main allocator (SLAB or SLUB) returns a guarded allocation from the KFENCE object pool. At this point, the timer is reset, and the next allocation is set up after the expiration of the interval. To enable/disable a KFENCE allocation through the main allocator's fast-path without overhead, KFENCE relies on static branches via the static keys infrastructure. The static branch is toggled to redirect the allocation to KFENCE. The KFENCE memory pool is of fixed size, and if the pool is exhausted no further KFENCE allocations occur. The default config is conservative with only 255 objects, resulting in a pool size of 2 MiB (with 4 KiB pages). We have verified by running synthetic benchmarks (sysbench I/O, hackbench) and production server-workload benchmarks that a kernel with KFENCE (using sample intervals 100-500ms) is performance-neutral compared to a non-KFENCE baseline kernel. KFENCE is inspired by GWP-ASan [1], a userspace tool with similar properties. The name "KFENCE" is a homage to the Electric Fence Malloc Debugger [2]. For more details, see Documentation/dev-tools/kfence.rst added in the series -- also viewable here: https://raw.githubusercontent.com/google/kasan/kfence/Documentation/dev-tools/kfence.rst [1] http://llvm.org/docs/GwpAsan.html [2] https://linux.die.net/man/3/efence This patch (of 9): This adds the Kernel Electric-Fence (KFENCE) infrastructure. KFENCE is a low-overhead sampling-based memory safety error detector of heap use-after-free, invalid-free, and out-of-bounds access errors. KFENCE is designed to be enabled in production kernels, and has near zero performance overhead. Compared to KASAN, KFENCE trades performance for precision. The main motivation behind KFENCE's design, is that with enough total uptime KFENCE will detect bugs in code paths not typically exercised by non-production test workloads. One way to quickly achieve a large enough total uptime is when the tool is deployed across a large fleet of machines. KFENCE objects each reside on a dedicated page, at either the left or right page boundaries. The pages to the left and right of the object page are "guard pages", whose attributes are changed to a protected state, and cause page faults on any attempted access to them. Such page faults are then intercepted by KFENCE, which handles the fault gracefully by reporting a memory access error. To detect out-of-bounds writes to memory within the object's page itself, KFENCE also uses pattern-based redzones. The following figure illustrates the page layout: ---+-----------+-----------+-----------+-----------+-----------+--- | xxxxxxxxx | O : | xxxxxxxxx | : O | xxxxxxxxx | | xxxxxxxxx | B : | xxxxxxxxx | : B | xxxxxxxxx | | x GUARD x | J : RED- | x GUARD x | RED- : J | x GUARD x | | xxxxxxxxx | E : ZONE | xxxxxxxxx | ZONE : E | xxxxxxxxx | | xxxxxxxxx | C : | xxxxxxxxx | : C | xxxxxxxxx | | xxxxxxxxx | T : | xxxxxxxxx | : T | xxxxxxxxx | ---+-----------+-----------+-----------+-----------+-----------+--- Guarded allocations are set up based on a sample interval (can be set via kfence.sample_interval). After expiration of the sample interval, a guarded allocation from the KFENCE object pool is returned to the main allocator (SLAB or SLUB). At this point, the timer is reset, and the next allocation is set up after the expiration of the interval. To enable/disable a KFENCE allocation through the main allocator's fast-path without overhead, KFENCE relies on static branches via the static keys infrastructure. The static branch is toggled to redirect the allocation to KFENCE. To date, we have verified by running synthetic benchmarks (sysbench I/O, hackbench) that a kernel compiled with KFENCE is performance-neutral compared to the non-KFENCE baseline. For more details, see Documentation/dev-tools/kfence.rst (added later in the series). [elver@google.com: fix parameter description for kfence_object_start()] Link: https://lkml.kernel.org/r/20201106092149.GA2851373@elver.google.com [elver@google.com: avoid stalling work queue task without allocations] Link: https://lkml.kernel.org/r/CADYN=9J0DQhizAGB0-jz4HOBBh+05kMBXb4c0cXMS7Qi5NAJiw@mail.gmail.com Link: https://lkml.kernel.org/r/20201110135320.3309507-1-elver@google.com [elver@google.com: fix potential deadlock due to wake_up()] Link: https://lkml.kernel.org/r/000000000000c0645805b7f982e4@google.com Link: https://lkml.kernel.org/r/20210104130749.1768991-1-elver@google.com [elver@google.com: add option to use KFENCE without static keys] Link: https://lkml.kernel.org/r/20210111091544.3287013-1-elver@google.com [elver@google.com: add missing copyright and description headers] Link: https://lkml.kernel.org/r/20210118092159.145934-1-elver@google.com Link: https://lkml.kernel.org/r/20201103175841.3495947-2-elver@google.com Signed-off-by: Marco Elver <elver@google.com> Signed-off-by: Alexander Potapenko <glider@google.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: SeongJae Park <sjpark@amazon.de> Co-developed-by: Marco Elver <elver@google.com> Reviewed-by: Jann Horn <jannh@google.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christopher Lameter <cl@linux.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hillf Danton <hdanton@sina.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Joern Engel <joern@purestorage.com> Cc: Kees Cook <keescook@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26mm: page-flags.h: Typo fix (It -> If)Guo Ren1-2/+2
The "If" was wrongly spelled as "It". Link: https://lkml.kernel.org/r/1608959036-91409-1-git-send-email-guoren@kernel.org Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Steven Price <steven.price@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26zsmalloc: account the number of compacted pages correctlyRokudo Yan1-1/+1
There exists multiple path may do zram compaction concurrently. 1. auto-compaction triggered during memory reclaim 2. userspace utils write zram<id>/compaction node So, multiple threads may call zs_shrinker_scan/zs_compact concurrently. But pages_compacted is a per zsmalloc pool variable and modification of the variable is not serialized(through under class->lock). There are two issues here: 1. the pages_compacted may not equal to total number of pages freed(due to concurrently add). 2. zs_shrinker_scan may not return the correct number of pages freed(issued by current shrinker). The fix is simple: 1. account the number of pages freed in zs_compact locally. 2. use actomic variable pages_compacted to accumulate total number. Link: https://lkml.kernel.org/r/20210202122235.26885-1-wu-yan@tcl.com Fixes: 860c707dca155a56 ("zsmalloc: account the number of compacted pages") Signed-off-by: Rokudo Yan <wu-yan@tcl.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26mm/zswap: add the flag can_sleep_mappedTian Tao1-0/+3
Patch series "Fix the compatibility of zsmalloc and zswap". Patch #1 adds a flag to zpool, then zswap used to determine if zpool drivers such as zbud/z3fold/zsmalloc will enter an atomic context after mapping. The difference between zbud/z3fold and zsmalloc is that zsmalloc requires an atomic context that since its map function holds a preempt-disabled, but zbud/z3fold don't require an atomic context. So patch #2 sets flag sleep_mapped to true indicating that zbud/z3fold can sleep after mapping. zsmalloc didn't support sleep after mapping, so don't set that flag to true. This patch (of 2): Add a flag to zpool, named is "can_sleep_mapped", and have it set true for zbud/z3fold, not set this flag for zsmalloc, so its default value is false. Then zswap could go the current path if the flag is true; and if it's false, copy data from src to a temporary buffer, then unmap the handle, take the mutex, process the buffer instead of src to avoid sleeping function called from atomic context. [natechancellor@gmail.com: add return value in zswap_frontswap_load] Link: https://lkml.kernel.org/r/20210121214804.926843-1-natechancellor@gmail.com [tiantao6@hisilicon.com: fix potential memory leak] Link: https://lkml.kernel.org/r/1611538365-51811-1-git-send-email-tiantao6@hisilicon.com [colin.king@canonical.com: fix potential uninitialized pointer read on tmp] Link: https://lkml.kernel.org/r/20210128141728.639030-1-colin.king@canonical.com [tiantao6@hisilicon.com: fix variable 'entry' is uninitialized when used] Link: https://lkml.kernel.org/r/1611223030-58346-1-git-send-email-tiantao6@hisilicon.comLink: https://lkml.kernel.org/r/1611035683-12732-1-git-send-email-tiantao6@hisilicon.com Link: https://lkml.kernel.org/r/1611035683-12732-2-git-send-email-tiantao6@hisilicon.com Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Vitaly Wool <vitaly.wool@konsulko.com> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reported-by: Mike Galbraith <efault@gmx.de> Cc: Barry Song <song.bao.hua@hisilicon.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjenning@redhat.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26mm/rmap: fix potential pte_unmap on an not mapped pteMiaohe Lin1-1/+2
For PMD-mapped page (usually THP), pvmw->pte is NULL. For PTE-mapped THP, pvmw->pte is mapped. But for HugeTLB pages, pvmw->pte is not mapped and set to the relevant page table entry. So in page_vma_mapped_walk_done(), we may do pte_unmap() for HugeTLB pte which is not mapped. Fix this by checking pvmw->page against PageHuge before trying to do pte_unmap(). Link: https://lkml.kernel.org/r/20210127093349.39081-1-linmiaohe@huawei.com Fixes: ace71a19cec5 ("mm: introduce page_vma_mapped_walk()") Signed-off-by: Hongxiang Lou <louhongxiang@huawei.com> Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Michel Lespinasse <walken@google.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Wei Yang <richard.weiyang@linux.alibaba.com> Cc: Dmitry Safonov <0x7f454c46@gmail.com> Cc: Brian Geffon <bgeffon@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26mm/memory_hotplug: prevalidate the address range being added with platformAnshuman Khandual1-0/+10
Patch series "mm/memory_hotplug: Pre-validate the address range with platform", v5. This series adds a mechanism allowing platforms to weigh in and prevalidate incoming address range before proceeding further with the memory hotplug. This helps prevent potential platform errors for the given address range, down the hotplug call chain, which inevitably fails the hotplug itself. This mechanism was suggested by David Hildenbrand during another discussion with respect to a memory hotplug fix on arm64 platform. https://lore.kernel.org/linux-arm-kernel/1600332402-30123-1-git-send-email-anshuman.khandual@arm.com/ This mechanism focuses on the addressibility aspect and not [sub] section alignment aspect. Hence check_hotplug_memory_range() and check_pfn_span() have been left unchanged. This patch (of 4): This introduces mhp_range_allowed() which can be called in various memory hotplug paths to prevalidate the address range which is being added, with the platform. Then mhp_range_allowed() calls mhp_get_pluggable_range() which provides applicable address range depending on whether linear mapping is required or not. For ranges that require linear mapping, it calls a new arch callback arch_get_mappable_range() which the platform can override. So the new callback, in turn provides the platform an opportunity to configure acceptable memory hotplug address ranges in case there are constraints. This mechanism will help prevent platform specific errors deep down during hotplug calls. This drops now redundant check_hotplug_memory_addressable() check in __add_pages() but instead adds a VM_BUG_ON() check which would ensure that the range has been validated with mhp_range_allowed() earlier in the call chain. Besides mhp_get_pluggable_range() also can be used by potential memory hotplug callers to avail the allowed physical range which would go through on a given platform. This does not really add any new range check in generic memory hotplug but instead compensates for lost checks in arch_add_memory() where applicable and check_hotplug_memory_addressable(), with unified mhp_range_allowed(). [akpm@linux-foundation.org: make pagemap_range() return -EINVAL when mhp_range_allowed() fails] Link: https://lkml.kernel.org/r/1612149902-7867-1-git-send-email-anshuman.khandual@arm.com Link: https://lkml.kernel.org/r/1612149902-7867-2-git-send-email-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Suggested-by: David Hildenbrand <david@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> # s390 Cc: Will Deacon <will@kernel.org> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Pankaj Gupta <pankaj.gupta@cloud.ionos.com> Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Cc: teawater <teawaterz@linux.alibaba.com> Cc: Wei Yang <richard.weiyang@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26drivers/base/memory: don't store phys_device in memory blocksDavid Hildenbrand1-2/+1
No need to store the value for each and every memory block, as we can easily query the value at runtime. Reshuffle the members to optimize the memory layout. Also, let's clarify what the interface once was used for and why it's legacy nowadays. "phys_device" was used on s390x in older versions of lsmem[2]/chmem[3], back when they were still part of s390x-tools. They were later replaced by the variants in linux-utils. For example, RHEL6 and RHEL7 contain lsmem/chmem from s390-utils. RHEL8 switched to versions from util-linux on s390x [4]. "phys_device" was added with sysfs support for memory hotplug in commit 3947be1969a9 ("[PATCH] memory hotplug: sysfs and add/remove functions") in 2005. It always returned 0. s390x started returning something != 0 on some setups (if sclp.rzm is set by HW) in 2010 via commit 57b552ba0b2f ("memory hotplug/s390: set phys_device"). For s390x, it allowed for identifying which memory block devices belong to the same storage increment (RZM). Only if all memory block devices comprising a single storage increment were offline, the memory could actually be removed in the hypervisor. Since commit e5d709bb5fb7 ("s390/memory hotplug: provide memory_block_size_bytes() function") in 2013 a memory block device spans at least one storage increment - which is why the interface isn't really helpful/used anymore (except by old lsmem/chmem tools). There were once RFC patches to make use of "phys_device" in ACPI context; however, the underlying problem could be solved using different interfaces [1]. [1] https://patchwork.kernel.org/patch/2163871/ [2] https://github.com/ibm-s390-tools/s390-tools/blob/v2.1.0/zconf/lsmem [3] https://github.com/ibm-s390-tools/s390-tools/blob/v2.1.0/zconf/chmem [4] https://bugzilla.redhat.com/show_bug.cgi?id=1504134 Link: https://lkml.kernel.org/r/20210201181347.13262-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Cc: Ilya Dryomov <idryomov@gmail.com> Cc: Vaibhav Jain <vaibhav@linux.ibm.com> Cc: Tom Rix <trix@redhat.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26mm/memory_hotplug: MEMHP_MERGE_RESOURCE -> MHP_MERGE_RESOURCEDavid Hildenbrand1-1/+1
Let's make "MEMHP_MERGE_RESOURCE" consistent with "MHP_NONE", "mhp_t" and "mhp_flags". As discussed recently [1], "mhp" is our internal acronym for memory hotplug now. [1] https://lore.kernel.org/linux-mm/c37de2d0-28a1-4f7d-f944-cfd7d81c334d@redhat.com/ Link: https://lkml.kernel.org/r/20210126115829.10909-1-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Acked-by: Wei Liu <wei.liu@kernel.org> Reviewed-by: Pankaj Gupta <pankaj.gupta@cloud.ionos.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Juergen Gross <jgross@suse.com> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Wei Yang <richard.weiyang@linux.alibaba.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26mm/memory_hotplug: rename all existing 'memhp' into 'mhp'Anshuman Khandual1-2/+2
This renames all 'memhp' instances to 'mhp' except for memhp_default_state for being a kernel command line option. This is just a clean up and should not cause a functional change. Let's make it consistent rater than mixing the two prefixes. In preparation for more users of the 'mhp' terminology. Link: https://lkml.kernel.org/r/1611554093-27316-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Suggested-by: David Hildenbrand <david@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26mm: fix memory_failure() handling of dax-namespace metadataDan Williams1-0/+6
Given 'struct dev_pagemap' spans both data pages and metadata pages be careful to consult the altmap if present to delineate metadata. In fact the pfn_first() helper already identifies the first valid data pfn, so export that helper for other code paths via pgmap_pfn_valid(). Other usage of get_dev_pagemap() are not a concern because those are operating on known data pfns having been looked up by get_user_pages(). I.e. metadata pfns are never user mapped. Link: https://lkml.kernel.org/r/161058501758.1840162.4239831989762604527.stgit@dwillia2-desk3.amr.corp.intel.com Fixes: 6100e34b2526 ("mm, memory_failure: Teach memory_failure() about dev_pagemap pages") Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reported-by: David Hildenbrand <david@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Qian Cai <cai@lca.pw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-29 16:36:59 +0300