summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2012-10-06[media] media: s5p-hdmi: add HPD GPIO to platform dataTomasz Stanislawski1-0/+2
This patch extends s5p-hdmi platform data by a GPIO identifier for Hot-Plug-Detection pin. Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-06[media] v4l: Add control definitions for new H264 encoder featuresArun Kumar K1-0/+41
New controls are added for supporting H264 encoding features like: - MVC frame packing, - flexible macroblock ordering, - arbitrary slice ordering, - hierarchical coding. Signed-off-by: Jeongtae Park <jtp.park@samsung.com> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> Signed-off-by: Arun Kumar K <arun.kk@samsung.com> Acked-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-06[media] v4l: Add fourcc definitions for new formatsArun Kumar K1-0/+4
Add the following new fourcc definitions, for multiplanar YCbCr: V4L2_PIX_FMT_NV21M, V4L2_PIX_FMT_NV12MT_16X16 and compressed formats: V4L2_PIX_FMT_H264_MVC, V4L2_PIX_FMT_VP8. Signed-off-by: Jeongtae Park <jtp.park@samsung.com> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> Signed-off-by: Arun Kumar K <arun.kk@samsung.com> Acked-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-06[media] s5p-csis: Allow to specify pixel clock's source through platform dataSylwester Nawrocki1-1/+3
Depending on the sensor configuration it might be required to adjust the CSIS's output pixel clock so it is greater than its input pixel clock, in order to avoid the input data FIFO overflow. Use platform data to select SCLK_CSIS clock from CMU as a source, rather than CSI APB clock. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-06[media] s5p-fimc: Remove unused platform data structure fieldsSylwester Nawrocki2-13/+4
alignment, fixed_phy_vdd and phy_enable fields are now unused so removed them. The data alignment is now derived directly from media bus pixel code, phy_enable callback has been replaced with direct function call and fixed_phy_vdd was dropped in commit 438df3ebe5f0ce408490a777a758d5905f0dd58f "[media] s5p-csis: Handle all available power supplies". Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-06[media] s5p-csis: Replace phy_enable platform data callback with direct callSylwester Nawrocki1-6/+5
The phy_enable callback is common for all Samsung SoC platforms, replace it with direct function call so the MIPI-CSI2 DPHY control is also possible on device tree instantiated platforms. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-06Merge branch 'samsung_platform_data' into staging/for_v3.7Mauro Carvalho Chehab80-1/+3391
* samsung_platform_data: ARM: samsung: move platform_data definitions ARM: orion: move platform_data definitions ARM: nomadik: move platform_data definitions ARM: w90x900: move platform_data definitions ARM: vt8500: move platform_data definitions ARM: tegra: move sdhci platform_data definition ARM: sa1100: move platform_data definitions ARM: pxa: move platform_data definitions ARM: netx: move platform_data definitions ARM: msm: move platform_data definitions ARM: imx: move platform_data definitions ARM: ep93xx: move platform_data definitions ARM: davinci: move platform_data definitions ARM: at91: move platform_data definitions
2012-10-06[media] media: davinci: vpif: display: separate out subdev from outputLad, Prabhakar1-4/+15
vpif_display relied on a 1-1 mapping of output and subdev. This is not necessarily the case. Separate the two. So there is a list of subdevs and a list of outputs. Each output refers to a subdev and has routing information. An output does not have to have a subdev. The initial output for each channel is set to the fist output. Currently missing is support for associating multiple subdevs with an output. Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-06[media] davinci: move struct vpif_interface to chan_cfgHans Verkuil1-1/+1
struct vpif_interface is channel specific, not subdev specific. Move it to the channel config. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Lad, Prabhakar <prabhakar.lad@ti.com> Tested-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-06[media] vpif_capture: move routing info from subdev to inputHans Verkuil1-2/+2
Routing information is a property of the input, not of the subdev. One subdev may provide multiple inputs, each with its own routing information. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Lad, Prabhakar <prabhakar.lad@ti.com> Tested-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-06[media] vpif_capture: remove unnecessary can_route flagHans Verkuil1-1/+0
Calling a subdev op that isn't implemented will just return -ENOIOCTLCMD No need to have a flag for that. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Lad, Prabhakar <prabhakar.lad@ti.com> Tested-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-06[media] media: v4l2-ctrl: add a helper function to add standard control with ↵Lad, Prabhakar1-0/+23
driver specific menu Add helper function v4l2_ctrl_new_std_menu_items(), which adds a standard menu control, with driver specific menu. Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-06[media] media: v4l2-ctrls: add control for test patternLad, Prabhakar1-0/+1
add V4L2_CID_TEST_PATTERN of type menu, which determines the internal test pattern selected by the device. Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-06[media] V4L: Add V4L2_PIX_FMT_S5C_UYVY_JPG fourcc definitionSylwester Nawrocki1-0/+1
This patch adds definition of the Samsung S5C73M3 camera specific image format. V4L2_PIX_FMT_S5C_UYVY_JPG is a two-planar format, the first plane contains interleaved UYVY and JPEG data followed by meta-data. The second plane contains additional meta-data needed for extracting JPEG and UYVY data stream from the first plane. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-06[media] V4L: Add V4L2_MBUS_FMT_S5C_UYVY_JPEG_1X8 media bus formatSylwester Nawrocki1-0/+5
This patch adds media bus pixel code for the interleaved JPEG/UYVY image format used by S5C73MX Samsung cameras. This interleaved image data is transferred on MIPI-CSI2 bus as User Defined Byte-based Data. It also defines an experimental vendor and device specific media bus formats section and adds related DocBook documentation. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-06[media] V4L: Add [get/set]_frame_desc subdev callbacksSylwester Nawrocki1-0/+42
Add subdev callbacks for setting up parameters of the frame on media bus that are not exposed to user space directly. This is just an initial, mostly stub implementation. struct v4l2_mbus_frame_desc is intended to be extended with sub-structures specific to a particular hardware media bus. For now these new callbacks are used only to query or specify maximum size of a compressed or hybrid (container) media bus frame in octets. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-06[media] V4L: Add s_rx_buffer subdev video operationSylwester Nawrocki1-0/+6
The s_rx_buffer callback allows the host to set buffer for a data being received by the subdev, e.g. non-image frame (meta) data. This callback can be implemented by subdevice like a MIPI CSI2 receiver, allowing the host driver to gather additional data into frame buffer passed to user space. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05[media] dm644x: replace the obsolete preset API by the timings APIHans Verkuil3-14/+10
This patch replaces the preset API by the timings API, and appropriate changes in board file. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-02[media] s5p-fimc: Add pipeline ops to separate FIMC-LITE moduleSylwester Nawrocki1-0/+18
In order to reuse the FIMC-LITE module on Exynos4 and Exynos5 SoC introduce a set of callbacks for the media pipeline control from within FIMC/FIMC-LITE video node. It lets us avoid symbol dependencies between FIMC-LITE and the whole media device driver, which simplifies the initialization sequences and doesn't introduce issues preventing common kernel image for exynos4 and exynos5 SoCs. This patch also corrects following build errors: drivers/built-in.o: In function `buffer_queue': drivers/media/video/s5p-fimc/fimc-lite.c:414: undefined reference to `fimc_pipeline_s_stream' drivers/built-in.o: In function `fimc_lite_resume': drivers/media/video/s5p-fimc/fimc-lite.c:1518: undefined reference to `fimc_pipeline_initialize' drivers/built-in.o: In function `fimc_lite_suspend': drivers/media/video/s5p-fimc/fimc-lite.c:1544: undefined reference to `fimc_pipeline_shutdown' when only CONFIG_VIDEO_EXYNOS_FIMC_LITE is selected, without CONFIG_VIDEO_S5P_FIMC. Reported-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-02[media] v4l2-ctrls: add a filter function to v4l2_ctrl_add_handlerHans Verkuil1-2/+16
With a filter function you can control more precisely which controls are added. This is useful in particular for radio device nodes for combined TV/Radio cards where you want to show just the radio-specific controls and not controls like brightness. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-01Merge tag 'v3.6' into staging/for_v3.7Mauro Carvalho Chehab35-54/+128
Linux 3.6 * tag 'v3.6': (562 commits) Linux 3.6 vfs: dcache: fix deadlock in tree traversal mtdchar: fix offset overflow detection thp: avoid VM_BUG_ON page_count(page) false positives in __collapse_huge_page_copy iommu/amd: Fix wrong assumption in iommu-group specific code netdev: octeon: fix return value check in octeon_mgmt_init_phy() ALSA: snd-usb: fix next_packet_size calls for pause case inetpeer: fix token initialization qlcnic: Fix scheduling while atomic bug bnx2: Clean up remaining iounmap trivial select_parent documentation fix net: phy: smsc: Implement PHY config_init for LAN87xx smsc75xx: fix resume after device reset um: Preinclude include/linux/kern_levels.h um: Fix IPC on um netdev: pasemi: fix return value check in pasemi_mac_phy_init() team: fix return value check l2tp: fix return value check USB: Fix race condition when removing host controllers USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irq ...
2012-09-29Merge tag 'iommu-fixes-v3.6-rc7' of ↵Linus Torvalds1-18/+24
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fixes from Joerg Roedel: "Two small patches: * One patch to fix the function declarations for !CONFIG_IOMMU_API. This is causing build errors in linux-next and should be fixed for v3.6. * Another patch to fix an IOMMU group related NULL pointer dereference." * tag 'iommu-fixes-v3.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/amd: Fix wrong assumption in iommu-group specific code iommu: static inline iommu group stub functions
2012-09-29Merge git://git.infradead.org/users/willy/linux-nvmeLinus Torvalds1-0/+2
Pull NVMe driver fixes from Matthew Wilcox: "Now that actual hardware has been released (don't have any yet myself), people are starting to want some of these fixes merged." Willy doesn't have hardware? Guys... * git://git.infradead.org/users/willy/linux-nvme: NVMe: Cancel outstanding IOs on queue deletion NVMe: Free admin queue memory on initialisation failure NVMe: Use ida for nvme device instance NVMe: Fix whitespace damage in nvme_init NVMe: handle allocation failure in nvme_map_user_pages() NVMe: Fix uninitialized iod compiler warning NVMe: Do not set IO queue depth beyond device max NVMe: Set block queue max sectors NVMe: use namespace id for nvme_get_features NVMe: replace nvme_ns with nvme_dev for user admin NVMe: Fix nvme module init when nvme_major is set NVMe: Set request queue logical block size
2012-09-27[media] add LNA support for DVB APIAntti Palosaari1-1/+3
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-27[media] videobuf2-core: Replace BUG_ON and return an error at vb2_queue_init()Ezequiel Garcia1-1/+1
This replaces BUG_ON() calls with WARN_ON(), and returns EINVAL if some parameter is NULL, as suggested by Jonathan and Mauro. The BUG_ON() call is too drastic to be used in this case. See the full discussion here: http://www.spinics.net/lists/linux-media/msg52462.html Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-27Merge tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreamingLinus Torvalds1-1/+3
Pull c6x arch fixes from Mark Salter: - Add __NR_kcmp to generic syscall list - C6X: Use generic asm/barrier.h * tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming: syscalls: add __NR_kcmp syscall to generic unistd.h c6x: use asm-generic/barrier.h
2012-09-27[media] Add v4l2 subdev driver for S5K4ECGX sensorSangwook Lee1-0/+37
This patch adds driver for Samsung S5K4ECGX image sensor with an embedded SoC ISP. The driver only implements preview operation mode and still capture (snapshot) and face detection features are missing now. Following controls are supported: contrast, saturation, brightness, sharpness. Signed-off-by: Sangwook Lee <sangwook.lee@linaro.org> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26syscalls: add __NR_kcmp syscall to generic unistd.hMark Salter1-1/+3
Commit d97b46a64 ("syscalls, x86: add __NR_kcmp syscall" ) added a new syscall to support checkpoint restore. It is currently x86-only, but that restriction will be removed in a subsequent patch. Unfortunately, the kernel checksyscalls script had a bug which suppressed any warning to other architectures that the kcmp syscall was not implemented. A patch to checksyscalls is being tested in linux-next and other architectures are seeing warnings about kcmp being unimplemented. This patch adds __NR_kcmp to <asm-generic/unistd.h> so that kcmp is wired in for architectures using the generic syscall list. Signed-off-by: Mark Salter <msalter@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-09-26[media] v4l2-dev: add new VFL_DIR_ definesHans Verkuil1-1/+8
These will be used by v4l2-dev.c to improve ioctl checking. I.e. ioctls for capture should return -ENOTTY when called for an output device. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] v4l2: make vidioc_s_crop constHans Verkuil3-4/+4
Write-only ioctls should have a const argument in the ioctl op. Do this conversion for vidioc_s_crop. Adding const for write-only ioctls was decided during the 2012 Media Workshop. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] v4l2: make vidioc_s_modulator constHans Verkuil2-2/+2
Write-only ioctls should have a const argument in the ioctl op. Do this conversion for vidioc_s_modulator. Adding const for write-only ioctls was decided during the 2012 Media Workshop. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] v4l2: make vidioc_s_audout constHans Verkuil1-1/+1
Write-only ioctls should have a const argument in the ioctl op. Do this conversion for vidioc_s_audout. Adding const for write-only ioctls was decided during the 2012 Media Workshop. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] v4l2: make vidioc_s_audio constHans Verkuil1-1/+1
Write-only ioctls should have a const argument in the ioctl op. Do this conversion for vidioc_s_audio. Adding const for write-only ioctls was decided during the 2012 Media Workshop. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] v4l2: make vidioc_(un)subscribe_event constHans Verkuil3-5/+5
Write-only ioctls should have a const argument in the ioctl op. Do this conversion for vidioc_(un)subscribe_event. Adding const for write-only ioctls was decided during the 2012 Media Workshop. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] v4l2: make vidioc_s_freq_hw_seek constHans Verkuil1-1/+1
Write-only ioctls should have a const argument in the ioctl op. Do this conversion for vidioc_s_freq_hw_seek. Adding const for write-only ioctls was decided during the 2012 Media Workshop. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] v4l2: make vidioc_s_jpegcomp constHans Verkuil1-1/+1
Write-only ioctls should have a const argument in the ioctl op. Do this conversion for vidioc_s_jpegcomp. Adding const for write-only ioctls was decided during the 2012 Media Workshop. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] v4l2: make vidioc_s_fbuf constHans Verkuil1-1/+1
Write-only ioctls should have a const argument in the ioctl op. Do this conversion for vidioc_s_fbuf. Adding const for write-only ioctls was decided during the 2012 Media Workshop. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] Rename V4L2_(IN|OUT)_CAP_CUSTOM_TIMINGSHans Verkuil1-2/+4
The 'custom' timings are no longer just for custom timings, but also for standard CEA/VESA timings. So rename to V4L2_IN/OUT_CAP_DV_TIMINGS. The old define is still kept for backwards compatibility. This decision was taken during the 2012 Media Workshop. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] v4l2-core: deprecate V4L2_BUF_TYPE_PRIVATEHans Verkuil2-8/+1
This buffer type isn't used at all, and since it is effectively undefined what it should do it is deprecated. The define still exists, but any internal support for such buffers is removed. The decisions to deprecate this was taken during the 2012 Media Workshop. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] videodev2.h: split off controls into v4l2-controls.hHans Verkuil3-695/+764
During the 2012 Media Workshop it was decided to split off the control definitions into their own v4l2-controls.h header, included by videodev2.h. Because controls make up such a large part of V4L2 they made it hard to read videodev2.h. Splitting off the control definitions makes life easier. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-3/+16
Pull more networking fixes from David Miller: 1) Eric Dumazet discovered and fixed what turned out to be a family of bugs. These functions were using pskb_may_pull() which might need to reallocate the linear SKB data buffer, but the callers were not expecting this possibility. The callers have cached pointers to the packet header areas, and would need to reload them if we were to continue using pskb_may_pull(). So they could end up reading garbage. It's easier to just change these RAW4/RAW6/MIP6 routines to use skb_header_pointer() instead of pskb_may_pull(), which won't modify the linear SKB data area. 2) Dave Jone's syscall spammer caught a case where a non-TCP socket can call down into the TCP keepalive code. The case basically involves creating a raw socket with sk_protocol == IPPROTO_TCP, then calling setsockopt(sock_fd, SO_KEEPALIVE, ...) Fixed by Eric Dumazet. 3) Bluetooth devices do not get configured properly while being powered on, resulting in always using legacy pairing instead of SSP. Fix from Andrzej Kaczmarek. 4) Bluetooth cancels delayed work erroneously, put stricter checks in place. From Andrei Emeltchenko. 5) Fix deadlock between cfg80211_mutex and reg_regdb_search_mutex in cfg80211, from Luis R. Rodriguez. 6) Fix interrupt double release in iwlwifi, from Emmanuel Grumbach. 7) Missing module license in bcm87xx driver, from Peter Huewe. 8) Team driver can lose port changed events when adding devices to a team, fix from Jiri Pirko. 9) Fix endless loop when trying ot unregister PPPOE device in zombie state, from Xiaodong Xu. 10) batman-adv layer needs to set MAC address of software device earlier, otherwise we call tt_local_add with it uninitialized. 11) Fix handling of KSZ8021 PHYs, it's matched currently by KS8051 but that doesn't program the device properly. From Marek Vasut. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: ipv6: mip6: fix mip6_mh_filter() ipv6: raw: fix icmpv6_filter() net: guard tcp_set_keepalive() to tcp sockets phy/micrel: Add missing header to micrel_phy.h phy/micrel: Rename KS80xx to KSZ80xx phy/micrel: Implement support for KSZ8021 batman-adv: Fix symmetry check / route flapping in multi interface setups batman-adv: Fix change mac address of soft iface. pppoe: drop PPPOX_ZOMBIEs in pppoe_release team: send port changed when added ipv4: raw: fix icmp_filter() net/phy/bcm87xx: Add MODULE_LICENSE("GPL") to GPL driver iwlwifi: don't double free the interrupt in failure path cfg80211: fix possible circular lock on reg_regdb_search() Bluetooth: Fix not removing power_off delayed work Bluetooth: Fix freeing uninitialized delayed works Bluetooth: mgmt: Fix enabling LE while powered off Bluetooth: mgmt: Fix enabling SSP while powered off
2012-09-25c/r: prctl: fix build error for no-MMU caseMark Salter1-0/+1
Commit 1ad75b9e1628 ("c/r: prctl: add minimal address test to PR_SET_MM") added some address checking to prctl_set_mm() used by checkpoint-restore. This causes a build error for no-MMU systems: kernel/sys.c: In function 'prctl_set_mm': kernel/sys.c:1868:34: error: 'mmap_min_addr' undeclared (first use in this function) The test for mmap_min_addr doesn't make a lot of sense for no-MMU code as noted in commit 6e1415467614 ("NOMMU: Optimise away the {dac_,}mmap_min_addr tests"). This patch defines mmap_min_addr as 0UL in the no-MMU case so that the compiler will optimize away tests for "addr < mmap_min_addr". Signed-off-by: Mark Salter <msalter@redhat.com> Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: <stable@vger.kernel.org> [3.6.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-09-25iommu: static inline iommu group stub functionsAlex Williamson1-18/+24
Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-09-24phy/micrel: Add missing header to micrel_phy.hMarek Vasut1-0/+12
The license header was missing in micrel_phy.h . This patch adds one. Signed-off-by: Marek Vasut <marex@denx.de> Cc: David J. Choi <david.choi@micrel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-24phy/micrel: Rename KS80xx to KSZ80xxMarek Vasut1-3/+3
There is no such part as KS8001, KS8041 or KS8051. There are only KSZ8001, KSZ8041 and KSZ8051. Rename these parts as such to match the Micrel naming. Signed-off-by: Marek Vasut <marex@denx.de> Cc: David J. Choi <david.choi@micrel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Cc: Linux ARM kernel <linux-arm-kernel@lists.infradead.org> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-24phy/micrel: Implement support for KSZ8021Marek Vasut1-0/+1
The KSZ8021 PHY was previously caught by KS8051, which is not correct. This PHY needs additional setup if it is strapped for address 0. In such case an reserved bit must be written in the 0x16, "Operation Mode Strap Override" register. According to the KS8051 datasheet, that bit means "PHY Address 0 in non-broadcast" and it indeed behaves as such on KSZ8021. The issue where the ethernet controller (Freescale FEC) did not communicate with network is fixed by writing this bit as 1. Signed-off-by: Marek Vasut <marex@denx.de> Cc: David J. Choi <david.choi@micrel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-24[media] dvb_frontend: add multistream supportEvgeny Plehov2-4/+6
Unify multistream support at the DVBAPI: several delivery systems allow it. Yet, each one had its own name. So, instead of adding a third version of this field, remove the per-standard naming, unifying it into a common name. The legacy code number can still be used by old applications. Version increased to 5.8. [mchehab@redhat.com: joined the va1j5jf007s patch, in order to avoid compilation breakage] Signed-off-by: Evgeny Plehov <EvgenyPlehov@ukr.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds5-5/+15
Pull networking updates from David Miller: "More bug fixes, nothing gets past these guys" 1) More kernel info leaks found by Mathias Krause, this time in the IPSEC configuration layers. 2) When IPSEC policies change, we do not properly make sure that cached routes (which could now be stale) throughout the system will be revalidated. Fix this by generalizing the generation count invalidation scheme used by ipv4. From Nicolas Dichtel. 3) When repairing TCP sockets, we need to allow to restore not just the send window scale, but the receive one too. Extend the existing interface to achieve this in a backwards compatible way. From Andrey Vagin. 4) A fix for FCOE scatter gather feature validation erroneously caused scatter gather to be disabled for things like AOE too. From Ed L Cashin. 5) Several cases of mishandling of error pointers, from Mathias Krause, Wei Yongjun, and Devendra Naga. 6) Fix gianfar build, from Richard Cochran. 7) CAP_NET_* failures should return -EPERM not -EACCES, from Zhao Hongjiang. 8) Hardware reset fix in janz-ican3 CAN driver, from Ira W Snyder. 9) Fix oops during rmmod in ti_hecc CAN driver, from Marc Kleine-Budde. 10) The removal of the conditional compilation of the clk support code in the stmmac driver broke things. This is because the interfaces used are the ones that don't also perform the enable/disable of the clk. Fix from Stefan Roese. 11) The QFQ packet scheduler can record out of range virtual start times, resulting later in misbehavior and even crashes. Fix from Paolo Valente. 12) If MSG_WAITALL is used with IOAT DMA under TCP, we can wedge the receiver when the advertised receive window goes to zero. Detect this case and force the processing of the IOAT DMA queue when it happens to avoid getting stuck. Fix from Michal Kubecek. 13) batman-adv assumes that test_bit() returns only 0 or 1, but this is not true for x86 (which returns -1 or 0, via the 'sbb' instruction). Fix from Linus Lussing. 14) Fix small packet corruption in e1000, from Tushar Dave. 15) make_blackhole() in the IPSEC policy code can do one read unlock too many, fix from Li RongQing. 16) The new tcp_try_coalesce() code introduced a bug in TCP URG handling, fix from Eric Dumazet. 17) Fix memory leak in __netif_receive_skb() when doing zerocopy and when hit an OOM condition. From Michael S Tsirkin. 18) netxen blindly deferences pdev->bus->self, which is not guarenteed to be non-NULL. Fix from Nikolay Aleksandrov. 19) Fix a performance regression caused by mistakes in ipv6 checksum validation in the bnx2x driver, fix from Michal Schmidt. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (45 commits) net/stmmac: Use clk_prepare_enable and clk_disable_unprepare net: change return values from -EACCES to -EPERM net/irda: sh_sir: fix return value check in sh_sir_set_baudrate() stmmac: fix return value check in stmmac_open_ext_timer() gianfar: fix phc index build failure ipv6: fix return value check in fib6_add() bnx2x: remove false warning regarding interrupt number can: ti_hecc: fix oops during rmmod can: janz-ican3: fix support for older hardware revisions net: do not disable sg for packets requiring no checksum aoe: assert AoE packets marked as requiring no checksum at91ether: return PTR_ERR if call to clk_get fails xfrm_user: don't copy esn replay window twice for new states xfrm_user: ensure user supplied esn replay window is valid xfrm_user: fix info leak in copy_to_user_tmpl() xfrm_user: fix info leak in copy_to_user_policy() xfrm_user: fix info leak in copy_to_user_state() xfrm_user: fix info leak in copy_to_user_auth() net: qmi_wwan: adding Huawei E367, ZTE MF683 and Pantech P4200 tcp: restore rcv_wscale in a repair mode (v2) ...
2012-09-22Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds2-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Small perf fixlets" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tracing: Don't call page_to_pfn() if page is NULL perf/x86: Fix Intel Ivy Bridge support perf/x86/ibs: Check syscall attribute flags perf/x86: Export Sandy Bridge uncore clockticks event in sysfs
2012-09-21Merge tag 'hwmon-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Add missing 'name' sysfs attributes to ad7314 and ads7871 drivers - Bump maximum wait time for applesmc driver (again) - Fix build warning seen with W=1 in include/linux/kernel.h, introduced with commit b6d86d3d6d6e ("Fix DIV_ROUND_CLOSEST to support negative dividends") * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: linux/kernel.h: Fix warning seen with W=1 due to change in DIV_ROUND_CLOSEST hwmon: (applesmc) Bump max wait hwmon: (ad7314) Add 'name' sysfs attribute hwmon: (ads7871) Add 'name' sysfs attribute
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-24 14:20:16 +0300