summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2019-08-27block: add helper for checking if queue is registeredMing Lei1-0/+1
There are 4 users which check if queue is registered, so add one helper to check it. Cc: Christoph Hellwig <hch@infradead.org> Cc: Hannes Reinecke <hare@suse.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-27block: Remove blk_mq_register_dev()Bart Van Assche1-1/+0
This function has no callers. Hence remove it. Cc: Christoph Hellwig <hch@infradead.org> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-27netfilter: nft_dynset: support for element deletionAnder Juaristi2-1/+10
This patch implements the delete operation from the ruleset. It implements a new delete() function in nft_set_rhash. It is simpler to use than the already existing remove(), because it only takes the set and the key as arguments, whereas remove() expects a full nft_set_elem structure. Signed-off-by: Ander Juaristi <a@juaristi.eus> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-08-27writeback, memcg: Implement foreign dirty flushingTejun Heo2-0/+40
There's an inherent mismatch between memcg and writeback. The former trackes ownership per-page while the latter per-inode. This was a deliberate design decision because honoring per-page ownership in the writeback path is complicated, may lead to higher CPU and IO overheads and deemed unnecessary given that write-sharing an inode across different cgroups isn't a common use-case. Combined with inode majority-writer ownership switching, this works well enough in most cases but there are some pathological cases. For example, let's say there are two cgroups A and B which keep writing to different but confined parts of the same inode. B owns the inode and A's memory is limited far below B's. A's dirty ratio can rise enough to trigger balance_dirty_pages() sleeps but B's can be low enough to avoid triggering background writeback. A will be slowed down without a way to make writeback of the dirty pages happen. This patch implements foreign dirty recording and foreign mechanism so that when a memcg encounters a condition as above it can trigger flushes on bdi_writebacks which can clean its pages. Please see the comment on top of mem_cgroup_track_foreign_dirty_slowpath() for details. A reproducer follows. write-range.c:: #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <fcntl.h> #include <sys/types.h> static const char *usage = "write-range FILE START SIZE\n"; int main(int argc, char **argv) { int fd; unsigned long start, size, end, pos; char *endp; char buf[4096]; if (argc < 4) { fprintf(stderr, usage); return 1; } fd = open(argv[1], O_WRONLY); if (fd < 0) { perror("open"); return 1; } start = strtoul(argv[2], &endp, 0); if (*endp != '\0') { fprintf(stderr, usage); return 1; } size = strtoul(argv[3], &endp, 0); if (*endp != '\0') { fprintf(stderr, usage); return 1; } end = start + size; while (1) { for (pos = start; pos < end; ) { long bread, bwritten = 0; if (lseek(fd, pos, SEEK_SET) < 0) { perror("lseek"); return 1; } bread = read(0, buf, sizeof(buf) < end - pos ? sizeof(buf) : end - pos); if (bread < 0) { perror("read"); return 1; } if (bread == 0) return 0; while (bwritten < bread) { long this; this = write(fd, buf + bwritten, bread - bwritten); if (this < 0) { perror("write"); return 1; } bwritten += this; pos += bwritten; } } } } repro.sh:: #!/bin/bash set -e set -x sysctl -w vm.dirty_expire_centisecs=300000 sysctl -w vm.dirty_writeback_centisecs=300000 sysctl -w vm.dirtytime_expire_seconds=300000 echo 3 > /proc/sys/vm/drop_caches TEST=/sys/fs/cgroup/test A=$TEST/A B=$TEST/B mkdir -p $A $B echo "+memory +io" > $TEST/cgroup.subtree_control echo $((1<<30)) > $A/memory.high echo $((32<<30)) > $B/memory.high rm -f testfile touch testfile fallocate -l 4G testfile echo "Starting B" (echo $BASHPID > $B/cgroup.procs pv -q --rate-limit 70M < /dev/urandom | ./write-range testfile $((2<<30)) $((2<<30))) & echo "Waiting 10s to ensure B claims the testfile inode" sleep 5 sync sleep 5 sync echo "Starting A" (echo $BASHPID > $A/cgroup.procs pv < /dev/urandom | ./write-range testfile 0 $((2<<30))) v2: Added comments explaining why the specific intervals are being used. v3: Use 0 @nr when calling cgroup_writeback_by_id() to use best-effort flushing while avoding possible livelocks. v4: Use get_jiffies_64() and time_before/after64() instead of raw jiffies_64 and arthimetic comparisons as suggested by Jan. Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-27writeback, memcg: Implement cgroup_writeback_by_id()Tejun Heo1-0/+2
Implement cgroup_writeback_by_id() which initiates cgroup writeback from bdi and memcg IDs. This will be used by memcg foreign inode flushing. v2: Use wb_get_lookup() instead of wb_get_create() to avoid creating spurious wbs. v3: Interpret 0 @nr as 1.25 * nr_dirty to implement best-effort flushing while avoding possible livelocks. Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-27writeback: Separate out wb_get_lookup() from wb_get_create()Tejun Heo1-0/+2
Separate out wb_get_lookup() which doesn't try to create one if there isn't already one from wb_get_create(). This will be used by later patches. Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-27bdi: Add bdi->idTejun Heo2-0/+3
There currently is no way to universally identify and lookup a bdi without holding a reference and pointer to it. This patch adds an non-recycling bdi->id and implements bdi_get_by_id() which looks up bdis by their ids. This will be used by memcg foreign inode flushing. I left bdi_list alone for simplicity and because while rb_tree does support rcu assignment it doesn't seem to guarantee lossless walk when walk is racing aginst tree rebalance operations. Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-27writeback: Generalize and expose wb_completionTejun Heo2-0/+22
wb_completion is used to track writeback completions. We want to use it from memcg side for foreign inode flushes. This patch updates it to remember the target waitq instead of assuming bdi->wb_waitq and expose it outside of fs-writeback.c. Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-27ALSA: hda - Allow runtime PM for controller if component notifier is usedTakashi Iwai1-0/+1
Currently we disallow the runtime PM of the HD-audio controller if it's bound with HDMI/DP on Nvidia / AMD unless it's for dGPU. This is for keeping the link up to get the proper notification for ELD hotplug. As explained in the commit 37a3a98ef601 ("ALSA: hda - Enable runtime PM only for discrete GPU"), this keep-power-up behavior is rather a stop-gap solution until the ELD notification via audio component. And now we finally got the audio component for these graphics drivers via commit ade49db337a9 ("ALSA: hda/hdmi - Allow audio component for AMD/ATI and Nvidia HDMI"), so it's time to change. This patch makes HD-audio controller again runtime-suspendable when the device gets bound with audio component in HDMI codec driver. For making it easier to access from the codec driver, move the flag into the common hda_bus object instead of hda_intel flag. Also rename it to keep_power, to indicate the actual meaning. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-08-27rxrpc: Use skb_unshare() rather than skb_cow_data()David Howells1-4/+8
The in-place decryption routines in AF_RXRPC's rxkad security module currently call skb_cow_data() to make sure the data isn't shared and that the skb can be written over. This has a problem, however, as the softirq handler may be still holding a ref or the Rx ring may be holding multiple refs when skb_cow_data() is called in rxkad_verify_packet() - and so skb_shared() returns true and __pskb_pull_tail() dislikes that. If this occurs, something like the following report will be generated. kernel BUG at net/core/skbuff.c:1463! ... RIP: 0010:pskb_expand_head+0x253/0x2b0 ... Call Trace: __pskb_pull_tail+0x49/0x460 skb_cow_data+0x6f/0x300 rxkad_verify_packet+0x18b/0xb10 [rxrpc] rxrpc_recvmsg_data.isra.11+0x4a8/0xa10 [rxrpc] rxrpc_kernel_recv_data+0x126/0x240 [rxrpc] afs_extract_data+0x51/0x2d0 [kafs] afs_deliver_fs_fetch_data+0x188/0x400 [kafs] afs_deliver_to_call+0xac/0x430 [kafs] afs_wait_for_call_to_complete+0x22f/0x3d0 [kafs] afs_make_call+0x282/0x3f0 [kafs] afs_fs_fetch_data+0x164/0x300 [kafs] afs_fetch_data+0x54/0x130 [kafs] afs_readpages+0x20d/0x340 [kafs] read_pages+0x66/0x180 __do_page_cache_readahead+0x188/0x1a0 ondemand_readahead+0x17d/0x2e0 generic_file_read_iter+0x740/0xc10 __vfs_read+0x145/0x1a0 vfs_read+0x8c/0x140 ksys_read+0x4a/0xb0 do_syscall_64+0x43/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by using skb_unshare() instead in the input path for DATA packets that have a security index != 0. Non-DATA packets don't need in-place encryption and neither do unencrypted DATA packets. Fixes: 248f219cb8bc ("rxrpc: Rewrite the data and ack handling code") Reported-by: Julian Wollrath <jwollrath@web.de> Signed-off-by: David Howells <dhowells@redhat.com>
2019-08-27rxrpc: Use the tx-phase skb flag to simplify tracingDavid Howells1-29/+22
Use the previously-added transmit-phase skbuff private flag to simplify the socket buffer tracing a bit. Which phase the skbuff comes from can now be divined from the skb rather than having to be guessed from the call state. We can also reduce the number of rxrpc_skb_trace values by eliminating the difference between Tx and Rx in the symbols. Signed-off-by: David Howells <dhowells@redhat.com>
2019-08-27Merge tag 'drm-next-5.4-2019-08-23' of ↵Dave Airlie1-0/+1
git://people.freedesktop.org/~agd5f/linux into drm-next drm-next-5.4-2019-08-23: amdgpu: - Enable power features on Navi12 - Enable power features on Arcturus - RAS updates - Initial Renoir APU support - Enable power featyres on Renoir - DC gamma fixes - DCN2 fixes - GPU reset support for Picasso - Misc cleanups and fixes scheduler: - Possible race fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190823202620.3870-1-alexander.deucher@amd.com
2019-08-27dt-bindings: ti_sci_pm_domains: Add support for exclusive and shared accessLokesh Vutla1-0/+9
TISCI protocol supports for enabling the device either with exclusive permissions for the requesting host or with sharing across the hosts. There are certain devices which are exclusive to Linux context and there are certain devices that are shared across different host contexts. So add support for getting this information from DT by increasing the power-domain cells to 2. Acked-by: Tero Kristo <t-kristo@ti.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2019-08-27firmware: ti_sci: Allow for device shared and exclusive requestsLokesh Vutla1-0/+3
Sysfw provides an option for requesting exclusive access for a device using the flags MSG_FLAG_DEVICE_EXCLUSIVE. If this flag is not used, the device is meant to be shared across hosts. Once a device is requested from a host with this flag set, any request to this device from a different host will be nacked by sysfw. Current tisci driver enables this flag for every device requests. But this may not be true for all the devices. So provide a separate commands in driver for exclusive and shared device requests. Reviewed-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2019-08-27rcu: Don't include <linux/ktime.h> in rcutiny.hChristoph Hellwig1-1/+1
The kbuild reported a built failure due to a header loop when RCUTINY is enabled with my pending riscv-nommu port. Switch rcutiny.h to only include the minimal required header to get HZ instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
2019-08-27net: sched: copy tunnel info when setting flow_action entry->tunnelVlad Buslov1-0/+17
In order to remove dependency on rtnl lock, modify tc_setup_flow_action() to copy tunnel info, instead of just saving pointer to tunnel_key action tunnel info. This is necessary to prevent concurrent action overwrite from releasing tunnel info while it is being used by rtnl-unlocked driver. Implement helper tcf_tunnel_info_copy() that is used to copy tunnel info with all its options to dynamically allocated memory block. Modify tc_cleanup_flow_action() to free dynamically allocated tunnel info. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-27net: sched: take reference to action dev before calling offloadsVlad Buslov1-0/+2
In order to remove dependency on rtnl lock when calling hardware offload API, take reference to action mirred dev when initializing flow_action structure in tc_setup_flow_action(). Implement function tc_cleanup_flow_action(), use it to release the device after hardware offload API is done using it. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-27net: sched: take rtnl lock in tc_setup_flow_action()Vlad Buslov1-1/+1
In order to allow using new flow_action infrastructure from unlocked classifiers, modify tc_setup_flow_action() to accept new 'rtnl_held' argument. Take rtnl lock before accessing tc_action data. This is necessary to protect from concurrent action replace. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-27net: sched: add API for registering unlocked offload block callbacksVlad Buslov2-0/+2
Extend struct flow_block_offload with "unlocked_driver_cb" flag to allow registering and unregistering block hardware offload callbacks that do not require caller to hold rtnl lock. Extend tcf_block with additional lockeddevcnt counter that is incremented for each non-unlocked driver callback attached to device. This counter is necessary to conditionally obtain rtnl lock before calling hardware callbacks in following patches. Register mlx5 tc block offload callbacks as "unlocked". Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-27net: sched: notify classifier on successful offload add/deleteVlad Buslov1-0/+4
To remove dependency on rtnl lock, extend classifier ops with new ops->hw_add() and ops->hw_del() callbacks. Call them from cls API while holding cb_lock every time filter if successfully added to or deleted from hardware. Implement the new API in flower classifier. Use it to manage hw_filters list under cb_lock protection, instead of relying on rtnl lock to synchronize with concurrent fl_reoffload() call. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-27net: sched: refactor block offloads counter usageVlad Buslov2-32/+16
Without rtnl lock protection filters can no longer safely manage block offloads counter themselves. Refactor cls API to protect block offloadcnt with tcf_block->cb_lock that is already used to protect driver callback list and nooffloaddevcnt counter. The counter can be modified by concurrent tasks by new functions that execute block callbacks (which is safe with previous patch that changed its type to atomic_t), however, block bind/unbind code that checks the counter value takes cb_lock in write mode to exclude any concurrent modifications. This approach prevents race conditions between bind/unbind and callback execution code but allows for concurrency for tc rule update path. Move block offload counter, filter in hardware counter and filter flags management from classifiers into cls hardware offloads API. Make functions tcf_block_offload_{inc|dec}() and tc_cls_offload_cnt_update() to be cls API private. Implement following new cls API to be used instead: tc_setup_cb_add() - non-destructive filter add. If filter that wasn't already in hardware is successfully offloaded, increment block offloads counter, set filter in hardware counter and flag. On failure, previously offloaded filter is considered to be intact and offloads counter is not decremented. tc_setup_cb_replace() - destructive filter replace. Release existing filter block offload counter and reset its in hardware counter and flag. Set new filter in hardware counter and flag. On failure, previously offloaded filter is considered to be destroyed and offload counter is decremented. tc_setup_cb_destroy() - filter destroy. Unconditionally decrement block offloads counter. tc_setup_cb_reoffload() - reoffload filter to single cb. Execute cb() and call tc_cls_offload_cnt_update() if cb() didn't return an error. Refactor all offload-capable classifiers to atomically offload filters to hardware, change block offload counter, and set filter in hardware counter and flag by means of the new cls API functions. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-27net: sched: change tcf block offload counter type to atomic_tVlad Buslov1-3/+4
As a preparation for running proto ops functions without rtnl lock, change offload counter type to atomic. This is necessary to allow updating the counter by multiple concurrent users when offloading filters to hardware from unlocked classifiers. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-27net: sched: protect block offload-related fields with rw_semaphoreVlad Buslov1-0/+2
In order to remove dependency on rtnl lock, extend tcf_block with 'cb_lock' rwsem and use it to protect flow_block->cb_list and related counters from concurrent modification. The lock is taken in read mode for read-only traversal of cb_list in tc_setup_cb_call() and write mode in all other cases. This approach ensures that: - cb_list is not changed concurrently while filters is being offloaded on block. - block->nooffloaddevcnt is checked while holding the lock in read mode, but is only changed by bind/unbind code when holding the cb_lock in write mode to prevent concurrent modification. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-26Revert "NFSv4/flexfiles: Abort I/O early if the layout segment was invalidated"Trond Myklebust1-1/+0
This reverts commit a79f194aa4879e9baad118c3f8bb2ca24dbef765. The mechanism for aborting I/O is racy, since we are not guaranteed that the request is asleep while we're changing both task->tk_status and task->tk_action. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: stable@vger.kernel.org # v5.1
2019-08-26ARCv2: IDU-intc: Add support for edge-triggered interruptsMischa Jonker1-0/+11
This adds support for an optional extra interrupt cell to specify edge vs level triggered. It is backward compatible with dts files with only one cell, and will default to level-triggered in such a case. Note that I had to make a change to idu_irq_set_affinity as well, as this function was setting the interrupt type to "level" unconditionally, since this was the only type supported previously. Signed-off-by: Mischa Jonker <mischa.jonker@synopsys.com> Reviewed-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-08-26clk: ti: add clkctrl data omap5 sgxTony Lindgren1-0/+3
Looks like we have sgx clock missing currently so let's add it. Cc: Adam Ford <aford173@gmail.com> Cc: Filip Matijević <filip.matijevic.pz@gmail.com> Cc: "H. Nikolaus Schaller" <hns@goldelico.com> Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Cc: moaz korena <moaz@korena.xyz> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Cc: Philipp Rossak <embed3d@gmail.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <t-kristo@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-clk@vger.kernel.org Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-26bus: ti-sysc: Add module enable quirk for SGX on omap36xxTony Lindgren1-0/+1
Add module enable quirk for SGX needed on omap36xx. Cc: Adam Ford <aford173@gmail.com> Cc: Filip Matijević <filip.matijevic.pz@gmail.com> Cc: "H. Nikolaus Schaller" <hns@goldelico.com> Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Cc: moaz korena <moaz@korena.xyz> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Cc: Philipp Rossak <embed3d@gmail.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-26RDMA/mlx5: RDMA_RX flow type support for user applicationsMark Zhang1-0/+1
Currently user applications can only steer TCP/IP(NIC RX/RX) traffic. This patch adds RDMA_RX as a new flow type to allow the user to insert steering rules to control RDMA traffic. Two destinations are supported(but not set at the same time): devx flow table object and QP. Signed-off-by: Mark Zhang <markz@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20190819113626.20284-4-leon@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-26Merge remote-tracking branch 'mlx5-next/mlx5-next' into for-nextDoug Ledford2-4/+15
Bring in the lastest mlx5-next branch as the RDMA RX RoCE Steering Support patch series requires it (first two patches are in mlx5-next, final patch in RDMA tree). Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-26media: v4l2-core: introduce a helper to unregister a i2c subdevEzequiel Garcia1-0/+10
Introduce a new video4linux2 i2c helper, to unregister a subdev. This allows to get rid of yet another ifdef. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> [hverkuil-cisco@xs4all.nl: fix checkpatch warning] Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-26media: v4l2-core: introduce a helper to unregister a spi subdevEzequiel Garcia1-0/+9
Introduce a new video4linux2 spi helper, to unregister a subdev. This allows to get rid of some more ifdefs. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-26media: v4l2-core: move i2c helpers out of v4l2-common.cEzequiel Garcia1-37/+76
Separate the i2c helpers to v4l2-i2c.c, in order to get rid of the ifdefery. No functional changes intended, this is just a cosmetic change to organize the code better. Given I2C is a tristate symbol, a hidden boolean symbol is introduced, to make the conditional build easier. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-26media: v4l2-core: move spi helpers out of v4l2-common.cEzequiel Garcia1-2/+16
Separate the spi helpers to v4l2-spi.c, in order to get rid of the ifdefery. No functional changes intended, this is just a cosmetic change to organize the code better. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-26fbdev: da8xx: remove panel_power_ctrl() callback from platform dataBartosz Golaszewski1-1/+0
There are no more users of panel_power_ctrl(). Remove it from the driver. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-08-26device property: Remove duplicate test for NULLAndy Shevchenko1-4/+5
There is no need to check twice for a NULL in fwnode_call_bool_op(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-26software node: Add software_node_find_by_name()Heikki Krogerus1-0/+4
Function that searches software nodes by node name. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-08-26thunderbolt: Add support for Intel Ice LakeMika Westerberg1-0/+2
The Thunderbolt controller is integrated into the Ice Lake CPU itself and requires special flows to power it on and off using force power bit in NHI VSEC registers. Runtime PM (RTD3) and Sx flows also differ from the discrete solutions. Now the firmware notifies the driver whether RTD3 entry or exit are possible. The driver is responsible of sending Go2Sx command through link controller mailbox when system enters Sx states (suspend-to-mem/disk). Rest of the ICM firwmare flows follow Titan Ridge. Signed-off-by: Raanan Avargil <raanan.avargil@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <YehezkelShB@gmail.com> Tested-by: Mario Limonciello <mario.limonciello@dell.com>
2019-08-26netfilter: nfnetlink_log: add support for VLAN informationMichael Braun1-0/+11
Currently, there is no vlan information (e.g. when used with a vlan aware bridge) passed to userspache, HWHEADER will contain an 08 00 (ip) suffix even for tagged ip packets. Therefore, add an extra netlink attribute that passes the vlan information to userspace similarly to 15824ab29f for nfqueue. Signed-off-by: Michael Braun <michael-dev@fami-braun.de> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-08-26netfilter: nft_meta: support for time matchingAnder Juaristi1-0/+6
This patch introduces meta matches in the kernel for time (a UNIX timestamp), day (a day of week, represented as an integer between 0-6), and hour (an hour in the current day, or: number of seconds since midnight). All values are taken as unsigned 64-bit integers. The 'time' keyword is internally converted to nanoseconds by nft in userspace, and hence the timestamp is taken in nanoseconds as well. Signed-off-by: Ander Juaristi <a@juaristi.eus> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-08-26Merge branch 'v5.4/dt' into v5.4/driversJerome Brunet1-0/+5
2019-08-26netfilter: nf_tables: Introduce new 64-bit helper register functionsAnder Juaristi1-7/+18
Introduce new helper functions to load/store 64-bit values onto/from registers: - nft_reg_store64 - nft_reg_load64 This commit also re-orders all these helpers from smallest to largest target bit size. Signed-off-by: Ander Juaristi <a@juaristi.eus> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-08-26dt-bindings: clk: meson: add sm1 periph clock controller bindingsNeil Armstrong1-0/+5
Update the documentation to support clock driver for the Amlogic SM1 SoC and expose the GP1, DSU and the CPU 1, 2 & 3 clocks. SM1 clock tree is very close, the main differences are : - each CPU core can achieve a different frequency, albeit a common PLL - a similar tree as the clock tree has been added for the DynamIQ Shared Unit - has a new GP1 PLL used for the DynamIQ Shared Unit - SM1 has additional clocks like for CSI, NanoQ an other components Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-08-26Merge tag 'pullreq201908' of ↵Rafael J. Wysocki1-0/+6
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mzx/devfreq Pull devfreq changes for v5.4 from MyungJoo Ham: "This series include: - Tegra driver fixes - new Tegra devices - Rockchip fixes - Exynos-bus fixes - Event: add "event type" - Passive: notifier updates" * tag 'pullreq201908' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mzx/devfreq: (27 commits) PM / devfreq: passive: Use non-devm notifiers PM / devfreq: exynos-bus: Convert to use dev_pm_opp_set_rate() PM / devfreq: exynos-bus: Correct clock enable sequence PM / devfreq: Correct devm_devfreq_remove_device() documentation PM / devfreq: events: extend events by type of counted data PM / devfreq: exynos-events: change matching code during probe PM / devfreq: tegra20: add COMMON_CLK dependency PM / devfreq: events: add Exynos PPMU new events PM / devfreq: Fix kernel oops on governor module load PM / devfreq: rk3399_dmc: Fix spelling typo PM / devfreq: Fix spelling typo PM / devfreq: Introduce driver for NVIDIA Tegra20 PM / devfreq: tegra: Rename tegra-devfreq.c to tegra30-devfreq.c PM / devfreq: tegra: Enable COMPILE_TEST for the driver PM / devfreq: tegra: Support Tegra30 PM / devfreq: tegra: Reconfigure hardware on governor's restart PM / devfreq: tegra: Move governor registration to driver's probe PM / devfreq: tegra: Mark ACTMON's governor as immutable PM / devfreq: tegra: Avoid inconsistency of current frequency value PM / devfreq: tegra: Clean up driver's probe / remove ...
2019-08-26mtd: nand: fix typo, s/erasablocks/eraseblocksTudor Ambarus1-1/+1
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-08-26mtd: rawnand: sharpsl: add include guard to linux/mtd/sharpsl.hMasahiro Yamada1-0/+5
Add a header include guard just in case. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-08-26nexthop: Fix nexthop_num_path for blackhole nexthopsDavid Ahern1-6/+0
Donald reported this sequence: ip next add id 1 blackhole ip next add id 2 blackhole ip ro add 1.1.1.1/32 nhid 1 ip ro add 1.1.1.2/32 nhid 2 would cause a crash. Backtrace is: [ 151.302790] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 151.304043] CPU: 1 PID: 277 Comm: ip Not tainted 5.3.0-rc5+ #37 [ 151.305078] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.1-1 04/01/2014 [ 151.306526] RIP: 0010:fib_add_nexthop+0x8b/0x2aa [ 151.307343] Code: 35 f7 81 48 8d 14 01 c7 02 f1 f1 f1 f1 c7 42 04 01 f4 f4 f4 48 89 f2 48 c1 ea 03 65 48 8b 0c 25 28 00 00 00 48 89 4d d0 31 c9 <80> 3c 02 00 74 08 48 89 f7 e8 1a e8 53 ff be 08 00 00 00 4c 89 e7 [ 151.310549] RSP: 0018:ffff888116c27340 EFLAGS: 00010246 [ 151.311469] RAX: dffffc0000000000 RBX: ffff8881154ece00 RCX: 0000000000000000 [ 151.312713] RDX: 0000000000000004 RSI: 0000000000000020 RDI: ffff888115649b40 [ 151.313968] RBP: ffff888116c273d8 R08: ffffed10221e3757 R09: ffff888110f1bab8 [ 151.315212] R10: 0000000000000001 R11: ffff888110f1bab3 R12: ffff888115649b40 [ 151.316456] R13: 0000000000000020 R14: ffff888116c273b0 R15: ffff888115649b40 [ 151.317707] FS: 00007f60b4d8d800(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000 [ 151.319113] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 151.320119] CR2: 0000555671ffdc00 CR3: 00000001136ba005 CR4: 0000000000020ee0 [ 151.321367] Call Trace: [ 151.321820] ? fib_nexthop_info+0x635/0x635 [ 151.322572] fib_dump_info+0xaa4/0xde0 [ 151.323247] ? fib_create_info+0x2431/0x2431 [ 151.324008] ? napi_alloc_frag+0x2a/0x2a [ 151.324711] rtmsg_fib+0x2c4/0x3be [ 151.325339] fib_table_insert+0xe2f/0xeee ... fib_dump_info incorrectly has nhs = 0 for blackhole nexthops, so it believes the nexthop object is a multipath group (nhs != 1) and ends up down the nexthop_mpath_fill_node() path which is wrong for a blackhole. The blackhole check in nexthop_num_path is leftover from early days of the blackhole implementation which did not initialize the device. In the end the design was simpler (fewer special case checks) to set the device to loopback in nh_info, so the check in nexthop_num_path should have been removed. Fixes: 430a049190de ("nexthop: Add support for nexthop groups") Reported-by: Donald Sharp <sharpd@cumulusnetworks.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-25Merge tag 'for-linus-5.3-rc6' of ↵Linus Torvalds1-5/+0
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs Pull UBIFS and JFFS2 fixes from Richard Weinberger: "UBIFS: - Don't block too long in writeback_inodes_sb() - Fix for a possible overrun of the log head - Fix double unlock in orphan_delete() JFFS2: - Remove C++ style from UAPI header and unbreak picky toolchains" * tag 'for-linus-5.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: ubifs: Limit the number of pages in shrink_liability ubifs: Correctly initialize c->min_log_bytes ubifs: Fix double unlock around orphan_delete() jffs2: Remove C++ style comments from uapi header
2019-08-25Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds1-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timekeeping fix from Thomas Gleixner: "A single fix for a regression caused by the generic VDSO implementation where a math overflow causes CLOCK_BOOTTIME to become a random number generator" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping/vsyscall: Prevent math overflow in BOOTTIME update
2019-08-25KVM: arm/arm64: vgic: Use a single IO device per redistributorEric Auger1-1/+0
At the moment we use 2 IO devices per GICv3 redistributor: one one for the RD_base frame and one for the SGI_base frame. Instead we can use a single IO device per redistributor (the 2 frames are contiguous). This saves slots on the KVM_MMIO_BUS which is currently limited to NR_IOBUS_DEVS (1000). This change allows to instantiate up to 512 redistributors and may speed the guest boot with a large number of VCPUs. Signed-off-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-25PM / devfreq: events: extend events by type of counted dataLukasz Luba1-0/+6
This patch adds posibility to choose what type of data should be counted by the PPMU counter. Now the type comes from DT where the event has been defined. When there is no 'event-data-type' the default value is used, which is 'read+write data in bytes'. It is needed when you want to know not only read+write data bytes but i.e. only write data in byte, or number of read requests, etc. Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> [Updated property by MyungJoo. data_type --> event_type] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-03 11:00:54 +0300