summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2011-12-02ASoC: Drop unused state parameter from CODEC suspend callbackLars-Peter Clausen1-2/+1
The existence of this parameter is purely historical. None of the CODEC drivers uses it and we always pass in the same value anyway, so it should be safe to remove it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-02ASoC: Add signal generator widget typeMark Brown1-0/+4
A signal generator behaves as an input would but is not considered for any of the special behaviour associated with external input pins. This is especially useful when automatically working out not connected widgets. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-12-01ASoC: Add platform data for WM8958/WM1811 microphone detection ratesMark Brown1-0/+20
Allow systems to override the default microphone detection rates using platform data in case the settings are not suitable (eg, due to an unusually noisy jack). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-01ASoC: Implement support for WM1811A jack detectionMark Brown1-0/+16
The WM1811A features an advanced low power accessory detection subsystem which allows the device to be maintained in a very low power state while the system is idle without sacrificing any accessory detection features. Implement software support for this, automatically managing the power configuration of the device depending on the detected accessory. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-01ASoC: Allow more WM8958/WM1811 button levels with default handlerMark Brown1-0/+3
The WM8958 and WM1811 support detecting a range of buttons. Allow the user to provide platform data enabling more of these levels without having to write a custom detection handler. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-29ASoC: Move SigmaDSP firmware loader to ASoCLars-Peter Clausen1-55/+0
It has been pointed out previously, that the firmware subsystem is not the right place for the SigmaDSP firmware loader. Furthermore the SigmaDSP is currently only used in audio products and we are aiming for better integration into the ASoC framework in the future, with support for ALSA controls for firmware parameters and support dynamic power management as well. So the natural choice for the SigmaDSP firmware loader is the ASoC subsystem. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-29Merge branch 'for-3.2' into for-3.3Mark Brown1-9/+4
2011-11-29firmware: Sigma: Fix endianess issuesLars-Peter Clausen1-4/+4
Currently the SigmaDSP firmware loader only works correctly on little-endian systems. Fix this by using the proper endianess conversion functions. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-11-29firmware: Sigma: Prevent out of bounds memory accessLars-Peter Clausen1-5/+0
The SigmaDSP firmware loader currently does not perform enough boundary size checks when processing the firmware. As a result it is possible that a malformed firmware can cause an out of bounds memory access. This patch adds checks which ensure that both the action header and the payload are completely inside the firmware data boundaries before processing them. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-11-24ASoC: fsi-ak4642: modify specification method of FSI / ak464xKuninori Morimoto1-0/+12
Current fsi-ak4642 was using id_entry name in order to specify FSI port and ak464x codec. But it was no sense, no flexibility. Platform can specify FSI/ak464x pair by this patch. Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-24ASoC: Implement fully_routed card propertyStephen Warren2-0/+2
A card is fully routed if the DAPM route table describes all connections on the board. When a card is fully routed, some operations can be automated by the ASoC core. The first, and currently only, such operation is described below, and implemented by this patch. Codecs often have a large number of external pins, and not all of these pins will be connected on all board designs. Some machine drivers therefore call snd_soc_dapm_nc_pin() for all the unused pins, in order to tell the ASoC core never to activate them. However, when a card is fully routed, the information needed to derive the set of unused pins is present in card->dapm_routes. In this case, have the ASoC core automatically call snd_soc_dapm_nc_pin() for each unused codec pin. This has been tested with soc/tegra/tegra_wm8903.c and soc/tegra/trimslice.c. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-15ASoC: sta32x: add workaround for ESD reset issueJohannes Stezenbach1-0/+1
sta32x resets and loses all configuration during ESD test. Work around by polling the CONFA register once a second and restore all coeffcients and registers when CONFA changes unexpectedly. Signed-off-by: Johannes Stezenbach <js@sig21.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-15ASoC: sta32x: add platform data definitionJohannes Stezenbach1-0/+34
Add a structure for platform specific configuration and use it, thereby removing a few FIXMEs which marked hard-coded values. Signed-off-by: Johannes Stezenbach <js@sig21.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-10ASoC: Remove LZO cache typeMark Brown1-1/+0
There are no current users and new drivers ought to be using the regmap API and its cache implementation directly so just delete the ASoC copy. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-10ASoC: Remove extra space in runtime struct definitionMark Brown1-1/+1
My usual technique for finding definitions is to search for "name {" which breaks with the extra space. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-08Merge branch 'topic/cache' of git://opensource.wolfsonmicro.com/regmap into ↵Mark Brown1-0/+1
for-3.3
2011-11-08regmap: Track if the register cache is dirty and suppress unneeded syncsMark Brown1-0/+1
Allow drivers to optimise out the register cache sync if they didn't need to do one. If the hardware is desynced from the register cache (by power loss for example) then the driver should call regcache_mark_dirty() to let the core know about this. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-08Merge branch 'for-3.2' into for-3.3Mark Brown516-3937/+14921
2011-11-08Merge branch 'for-3.2' of ↵Mark Brown1-0/+15
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-3.2
2011-11-08Merge branch 'for-3.2' into for-3.3Mark Brown1-0/+15
Conflicts: sound/soc/codecs/wm8940.c
2011-11-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds4-3/+14
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (47 commits) forcedeth: fix a few sparse warnings (variable shadowing) forcedeth: Improve stats counters forcedeth: remove unneeded stats updates forcedeth: Acknowledge only interrupts that are being processed forcedeth: fix race when unloading module MAINTAINERS/rds: update maintainer wanrouter: Remove kernel_lock annotations usbnet: fix oops in usbnet_start_xmit ixgbe: Fix compile for kernel without CONFIG_PCI_IOV defined etherh: Add MAINTAINERS entry for etherh bonding: comparing a u8 with -1 is always false sky2: fix regression on Yukon Optima netlink: clarify attribute length check documentation netlink: validate NLA_MSECS length i825xx:xscale:8390:freescale: Fix Kconfig dependancies macvlan: receive multicast with local address tg3: Update version to 3.121 tg3: Eliminate timer race with reset_task tg3: Schedule at most one tg3_reset_task run tg3: Obtain PCI function number from device ...
2011-11-07Merge branch 'release' of ↵Linus Torvalds4-24/+32
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: cpuidle: Single/Global registration of idle states cpuidle: Split cpuidle_state structure and move per-cpu statistics fields cpuidle: Remove CPUIDLE_FLAG_IGNORE and dev->prepare() cpuidle: Move dev->last_residency update to driver enter routine; remove dev->last_state ACPI: Fix CONFIG_ACPI_DOCK=n compiler warning ACPI: Export FADT pm_profile integer value to userspace thermal: Prevent polling from happening during system suspend ACPI: Drop ACPI_NO_HARDWARE_INIT ACPI atomicio: Convert width in bits to bytes in __acpi_ioremap_fast() PNPACPI: Simplify disabled resource registration ACPI: Fix possible recursive locking in hwregs.c ACPI: use kstrdup() mrst pmu: update comment tools/power turbostat: less verbose debugging
2011-11-07Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds3-31/+35
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (40 commits) vmwgfx: Snoop DMA transfers with non-covering sizes vmwgfx: Move the prefered mode first in the list vmwgfx: Unreference surface on cursor error path vmwgfx: Free prefered mode on error path vmwgfx: Use pointer return error codes vmwgfx: Fix hw cursor position vmwgfx: Infrastructure for explicit placement vmwgfx: Make the preferred autofit mode have a 60Hz vrefresh vmwgfx: Remove screen object active list vmwgfx: Screen object cleanups drm/radeon/kms: consolidate GART code, fix segfault after GPU lockup V2 drm/radeon/kms: don't poll forever if MC GDDR link training fails drm/radeon/kms: fix DP setup on TRAVIS bridges drm/radeon/kms: set HPD polarity in hpd_init() drm/radeon/kms: add MSI module parameter drm/radeon/kms: Add MSI quirk for Dell RS690 drm/radeon/kms: Add MSI quirk for HP RS690 drm/radeon/kms: split MSI check into a separate function vmwgfx: Reinstate the update_layout ioctl drm/radeon/kms: always do extended edid probe ...
2011-11-07Merge git://git.infradead.org/mtd-2.6Linus Torvalds7-173/+229
* git://git.infradead.org/mtd-2.6: (226 commits) mtd: tests: annotate as DANGEROUS in Kconfig mtd: tests: don't use mtd0 as a default mtd: clean up usage of MTD_DOCPROBE_ADDRESS jffs2: add compr=lzo and compr=zlib options jffs2: implement mount option parsing and compression overriding mtd: nand: initialize ops.mode mtd: provide an alias for the redboot module name mtd: m25p80: don't probe device which has status of 'disabled' mtd: nand_h1900 never worked mtd: Add DiskOnChip G3 support mtd: m25p80: add EON flash EN25Q32B into spi flash id table mtd: mark block device queue as non-rotational mtd: r852: make r852_pm_ops static mtd: m25p80: add support for at25df321a spi data flash mtd: mxc_nand: preset_v1_v2: unlock all NAND flash blocks mtd: nand: switch `check_pattern()' to standard `memcmp()' mtd: nand: invalidate cache on unaligned reads mtd: nand: do not scan bad blocks with NAND_BBT_NO_OOB set mtd: nand: wait to set BBT version mtd: nand: scrub BBT on ECC errors ... Fix up trivial conflicts: - arch/arm/mach-at91/board-usb-a9260.c Merged into board-usb-a926x.c - drivers/mtd/maps/lantiq-flash.c add_mtd_partitions -> mtd_device_register vs changed to use mtd_device_parse_register.
2011-11-07Merge branch 'upstream/jump-label-noearly' of ↵Linus Torvalds1-9/+14
git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen * 'upstream/jump-label-noearly' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: jump-label: initialize jump-label subsystem much earlier x86/jump_label: add arch_jump_label_transform_static() s390/jump-label: add arch_jump_label_transform_static() jump_label: add arch_jump_label_transform_static() to optimise non-live code updates sparc/jump_label: drop arch_jump_label_text_poke_early() x86/jump_label: drop arch_jump_label_text_poke_early() jump_label: if a key has already been initialized, don't nop it out stop_machine: make stop_machine safe and efficient to call early jump_label: use proper atomic_t initializer Conflicts: - arch/x86/kernel/jump_label.c Added __init_or_module to arch_jump_label_text_poke_early vs removal of that function entirely - kernel/stop_machine.c same patch ("stop_machine: make stop_machine safe and efficient to call early") merged twice, with whitespace fix in one version
2011-11-07Merge branch 'upstream/xen-settime' of ↵Linus Torvalds2-0/+321
git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen * 'upstream/xen-settime' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: xen/dom0: set wallclock time in Xen xen: add dom0_op hypercall xen/acpi: Domain0 acpi parser related platform hypercall
2011-11-07Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds55-215/+231
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-11-07Merge branches 'acpi', 'idle', 'mrst-pmu' and 'pm-tools' into nextLen Brown2-22/+31
2011-11-07Merge branch 'writeback-for-linus' of ↵Linus Torvalds4-37/+178
git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux * 'writeback-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux: writeback: Add a 'reason' to wb_writeback_work writeback: send work item to queue_io, move_expired_inodes writeback: trace event balance_dirty_pages writeback: trace event bdi_dirty_ratelimit writeback: fix ppc compile warnings on do_div(long long, unsigned long) writeback: per-bdi background threshold writeback: dirty position control - bdi reserve area writeback: control dirty pause time writeback: limit max dirty pause time writeback: IO-less balance_dirty_pages() writeback: per task dirty rate limit writeback: stabilize bdi->dirty_ratelimit writeback: dirty rate control writeback: add bg_threshold parameter to __bdi_update_bandwidth() writeback: dirty position control writeback: account per-bdi accumulated dirtied pages
2011-11-07Merge branch 'for-next' of ↵Linus Torvalds4-8/+25
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target: use ->exectute_task for all CDB emulation target: remove SCF_EMULATE_CDB_ASYNC target: refactor transport_emulate_control_cdb target: pass the se_task to the CDB emulation callback target: split core_scsi3_emulate_pr target: split core_scsi2_emulate_crh target: Add generic active I/O shutdown logic target: add back error handling in transport_complete_task target/pscsi: blk_make_request() returns an ERR_PTR() target: Remove core TRANSPORT_FREE_CMD_INTR usage target: Make TFO->check_stop_free return free status iscsi-target: Fix non-immediate TMR handling iscsi-target: Add missing CMDSN_LOWER_THAN_EXP check in iscsit_handle_scsi_cmd target: Avoid double list_del for aborted se_tmr_req target: Minor cleanups to core_tmr_drain_tmr_list target: Fix wrong se_tmr being added to drain_tmr_list target: Fix incorrect se_cmd assignment in core_tmr_drain_tmr_list target: Check -ENOMEM to signal QUEUE_FULL from fabric callbacks tcm_loop: Add explict read buffer memset for SCF_SCSI_CONTROL_SG_IO_CDB target: Fix compile warning w/ missing module.h include
2011-11-07Merge branch 'stable/vmalloc-3.2' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/vmalloc-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: net: xen-netback: use API provided by xenbus module to map rings block: xen-blkback: use API provided by xenbus module to map rings xen: use generic functions instead of xen_{alloc, free}_vm_area()
2011-11-07cpuidle: Single/Global registration of idle statesDeepthi Dharwar2-6/+14
This patch makes the cpuidle_states structure global (single copy) instead of per-cpu. The statistics needed on per-cpu basis by the governor are kept per-cpu. This simplifies the cpuidle subsystem as state registration is done by single cpu only. Having single copy of cpuidle_states saves memory. Rare case of asymmetric C-states can be handled within the cpuidle driver and architectures such as POWER do not have asymmetric C-states. Having single/global registration of all the idle states, dynamic C-state transitions on x86 are handled by the boot cpu. Here, the boot cpu would disable all the devices, re-populate the states and later enable all the devices, irrespective of the cpu that would receive the notification first. Reference: https://lkml.org/lkml/2011/4/25/83 Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com> Signed-off-by: Trinabh Gupta <g.trinabh@gmail.com> Tested-by: Jean Pihet <j-pihet@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-11-07cpuidle: Split cpuidle_state structure and move per-cpu statistics fieldsDeepthi Dharwar1-10/+15
This is the first step towards global registration of cpuidle states. The statistics used primarily by the governor are per-cpu and have to be split from rest of the fields inside cpuidle_state, which would be made global i.e. single copy. The driver_data field is also per-cpu and moved. Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com> Signed-off-by: Trinabh Gupta <g.trinabh@gmail.com> Tested-by: Jean Pihet <j-pihet@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-11-07cpuidle: Remove CPUIDLE_FLAG_IGNORE and dev->prepare()Deepthi Dharwar1-3/+0
The cpuidle_device->prepare() mechanism causes updates to the cpuidle_state[].flags, setting and clearing CPUIDLE_FLAG_IGNORE to tell the governor not to chose a state on a per-cpu basis at run-time. State demotion is now handled by the driver and it returns the actual state entered. Hence, this mechanism is not required. Also this removes per-cpu flags from cpuidle_state enabling it to be made global. Reference: https://lkml.org/lkml/2011/3/25/52 Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm> Signed-off-by: Trinabh Gupta <g.trinabh@gmail.com> Tested-by: Jean Pihet <j-pihet@ti.com> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-11-07cpuidle: Move dev->last_residency update to driver enter routine; remove ↵Deepthi Dharwar1-4/+3
dev->last_state Cpuidle governor only suggests the state to enter using the governor->select() interface, but allows the low level driver to override the recommended state. The actual entered state may be different because of software or hardware demotion. Software demotion is done by the back-end cpuidle driver and can be accounted correctly. Current cpuidle code uses last_state field to capture the actual state entered and based on that updates the statistics for the state entered. Ideally the driver enter routine should update the counters, and it should return the state actually entered rather than the time spent there. The generic cpuidle code should simply handle where the counters live in the sysfs namespace, not updating the counters. Reference: https://lkml.org/lkml/2011/3/25/52 Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com> Signed-off-by: Trinabh Gupta <g.trinabh@gmail.com> Tested-by: Jean Pihet <j-pihet@ti.com> Reviewed-by: Kevin Hilman <khilman@ti.com> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-11-07ACPI: Fix CONFIG_ACPI_DOCK=n compiler warningBart Van Assche1-1/+1
Recently the ACPI ops structs were constified but the inline version of register_hotplug_dock_device() was overlooked (see also commit 9c8b04b, June 25 2011). Update the inline function register_hotplug_dock_device() that is enabled with CONFIG_ACPI_DOCK=n too. This patch fixes at least the following compiler warnings: drivers/ata/libata-acpi.c: In function .ata_acpi_associate.: drivers/ata/libata-acpi.c:266:11: warning: passing argument 2 of .register_hotplug_dock_device. discards qualifiers from pointer target type include/acpi/acpi_drivers.h:146:19: note: expected .struct acpi_dock_ops *. but argument is of type .const struct acpi_dock_ops *. drivers/ata/libata-acpi.c:275:11: warning: passing argument 2 of .register_hotplug_dock_device. discards qualifiers from pointer target type include/acpi/acpi_drivers.h:146:19: note: expected .struct acpi_dock_ops *. but argument is of type .const struct acpi_dock_ops *. Cc: stable@vger.kernel.org Signed-off-by: Len Brown <len.brown@intel.com>
2011-11-07ACPI: Drop ACPI_NO_HARDWARE_INITRafael J. Wysocki1-1/+0
ACPI_NO_HARDWARE_INIT is only used by acpi_early_init() and acpi_bus_init() when calling acpi_enable_subsystem(), but acpi_enable_subsystem() doesn't check that flag, so it can be dropped. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2011-11-07Merge git://github.com/rustyrussell/linuxLinus Torvalds1-0/+1
* git://github.com/rustyrussell/linux: module,bug: Add TAINT_OOT_MODULE flag for modules not built in-tree module: Enable dynamic debugging regardless of taint
2011-11-07Merge branch 'next' of ↵Linus Torvalds2-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (106 commits) powerpc/p3060qds: Add support for P3060QDS board powerpc/83xx: Add shutdown request support to MCU handling on MPC8349 MITX powerpc/85xx: Make kexec to interate over online cpus powerpc/fsl_booke: Fix comment in head_fsl_booke.S powerpc/85xx: issue 15 EOI after core reset for FSL CoreNet devices powerpc/8xxx: Fix interrupt handling in MPC8xxx GPIO driver powerpc/85xx: Add 'fsl,pq3-gpio' compatiable for GPIO driver powerpc/86xx: Correct Gianfar support for GE boards powerpc/cpm: Clear muram before it is in use. drivers/virt: add ioctl for 32-bit compat on 64-bit to fsl-hv-manager powerpc/fsl_msi: add support for "msi-address-64" property powerpc/85xx: Setup secondary cores PIR with hard SMP id powerpc/fsl-booke: Fix settlbcam for 64-bit powerpc/85xx: Adding DCSR node to dtsi device trees powerpc/85xx: clean up FPGA device tree nodes for Freecsale QorIQ boards powerpc/85xx: fix PHYS_64BIT selection for P1022DS powerpc/fsl-booke: Fix setup_initial_memory_limit to not blindly map powerpc: respect mem= setting for early memory limit setup powerpc: Update corenet64_smp_defconfig powerpc: Update mpc85xx/corenet 32-bit defconfigs ... Fix up trivial conflicts in: - arch/powerpc/configs/40x/hcu4_defconfig removed stale file, edited elsewhere - arch/powerpc/include/asm/udbg.h, arch/powerpc/kernel/udbg.c: added opal and gelic drivers vs added ePAPR driver - drivers/tty/serial/8250.c moved UPIO_TSI to powerpc vs removed UPIO_DWAPB support
2011-11-07module,bug: Add TAINT_OOT_MODULE flag for modules not built in-treeBen Hutchings1-0/+1
Use of the GPL or a compatible licence doesn't necessarily make the code any good. We already consider staging modules to be suspect, and this should also be true for out-of-tree modules which may receive very little review. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Reviewed-by: Dave Jones <davej@redhat.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (patched oops-tracing.txt)
2011-11-06Merge branch 'pm-for-linus' of ↵Linus Torvalds3-14/+5
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm * 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / Freezer: Revert 27920651fe "PM / Freezer: Make fake_signal_wake_up() wake TASK_KILLABLE tasks too" PM / Freezer: Reimplement wait_event_freezekillable using freezer_do_not_count/freezer_count USB: Update last_busy time after autosuspend fails PM / Runtime: Automatically retry failed autosuspends PM / QoS: Remove redundant check PM / OPP: Fix build when CONFIG_PM_OPP is not set PM / Runtime: Fix runtime accounting calculation error PM / Sleep: Update freezer documentation PM / Sleep: Remove unused symbol 'suspend_cpu_hotplug' PM / Sleep: Fix race between CPU hotplug and freezer ACPI / PM: Add Sony VPCEB17FX to nonvs blacklist
2011-11-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds1-0/+2
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (45 commits) [SCSI] Fix block queue and elevator memory leak in scsi_alloc_sdev [SCSI] scsi_dh_alua: Fix the time inteval for alua rtpg commands [SCSI] scsi_transport_iscsi: Fix documentation os parameter [SCSI] mv_sas: OCZ RevoDrive3 & zDrive R4 support [SCSI] libfc: improve flogi retries to avoid lport stuck [SCSI] libfc: avoid exchanges collision during lport reset [SCSI] libfc: fix checking FC_TYPE_BLS [SCSI] edd: Treat "XPRS" host bus type the same as "PCI" [SCSI] isci: overriding max_concurr_spinup oem parameter by max(oem, user) [SCSI] isci: revert bcn filtering [SCSI] isci: Fix hard reset timeout conditions. [SCSI] isci: No need to manage the pending reset bit on pending requests. [SCSI] isci: Remove redundant isci_request.ttype field. [SCSI] isci: Fix task management for SMP, SATA and on dev remove. [SCSI] isci: No task_done callbacks in error handler paths. [SCSI] isci: Handle task request timeouts correctly. [SCSI] isci: Fix tag leak in tasks and terminated requests. [SCSI] isci: Immediately fail I/O to removed devices. [SCSI] isci: Lookup device references through requests in completions. [SCSI] ipr: add definitions for additional adapter ...
2011-11-05Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds4-14/+37
* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (63 commits) dmaengine: mid_dma: mask_peripheral_interrupt only when dmac is idle dmaengine/ep93xx_dma: add module.h include pch_dma: Reduce wasting memory pch_dma: Fix suspend issue dma/timberdale: free_irq() on an error path dma: shdma: transfer based runtime PM dmaengine: shdma: protect against the IRQ handler dmaengine i.MX DMA/SDMA: add missing include of linux/module.h dmaengine: delete redundant chan_id and chancnt initialization in dma drivers dmaengine/amba-pl08x: Check txd->llis_va before freeing dma_pool dmaengine/amba-pl08x: Add support for sg len greater than one for slave transfers serial: sh-sci: don't filter on DMA device, use only channel ID ARM: SAMSUNG: Remove Samsung specific enum type for dma direction ASoC: Samsung: Update DMA interface spi/s3c64xx: Merge dma control code spi/s3c64xx: Add support DMA engine API ARM: SAMSUNG: Remove S3C-PL330-DMA driver ARM: S5P64X0: Use generic DMA PL330 driver ARM: S5PC100: Use generic DMA PL330 driver ARM: S5PV210: Use generic DMA PL330 driver ... Fix up fairly trivial conflicts in - arch/arm/mach-exynos4/{Kconfig,clock.c} - arch/arm/mach-s5p64x0/dma.c
2011-11-05Merge branch 'for-3.2/drivers' of git://git.kernel.dk/linux-blockLinus Torvalds3-2/+41
* 'for-3.2/drivers' of git://git.kernel.dk/linux-block: (30 commits) virtio-blk: use ida to allocate disk index hpsa: add small delay when using PCI Power Management to reset for kump cciss: add small delay when using PCI Power Management to reset for kump xen/blkback: Fix two races in the handling of barrier requests. xen/blkback: Check for proper operation. xen/blkback: Fix the inhibition to map pages when discarding sector ranges. xen/blkback: Report VBD_WSECT (wr_sect) properly. xen/blkback: Support 'feature-barrier' aka old-style BARRIER requests. xen-blkfront: plug device number leak in xlblk_init() error path xen-blkfront: If no barrier or flush is supported, use invalid operation. xen-blkback: use kzalloc() in favor of kmalloc()+memset() xen-blkback: fixed indentation and comments xen-blkfront: fix a deadlock while handling discard response xen-blkfront: Handle discard requests. xen-blkback: Implement discard requests ('feature-discard') xen-blkfront: add BLKIF_OP_DISCARD and discard request struct drivers/block/loop.c: remove unnecessary bdev argument from loop_clr_fd() drivers/block/loop.c: emit uevent on auto release drivers/block/cpqarray.c: use pci_dev->revision loop: always allow userspace partitions and optionally support automatic scanning ... Fic up trivial header file includsion conflict in drivers/block/loop.c
2011-11-05Merge branch 'for-3.2/core' of git://git.kernel.dk/linux-blockLinus Torvalds5-39/+27
* 'for-3.2/core' of git://git.kernel.dk/linux-block: (29 commits) block: don't call blk_drain_queue() if elevator is not up blk-throttle: use queue_is_locked() instead of lockdep_is_held() blk-throttle: Take blkcg->lock while traversing blkcg->policy_list blk-throttle: Free up policy node associated with deleted rule block: warn if tag is greater than real_max_depth. block: make gendisk hold a reference to its queue blk-flush: move the queue kick into blk-flush: fix invalid BUG_ON in blk_insert_flush block: Remove the control of complete cpu from bio. block: fix a typo in the blk-cgroup.h file block: initialize the bounce pool if high memory may be added later block: fix request_queue lifetime handling by making blk_queue_cleanup() properly shutdown block: drop @tsk from attempt_plug_merge() and explain sync rules block: make get_request[_wait]() fail if queue is dead block: reorganize throtl_get_tg() and blk_throtl_bio() block: reorganize queue draining block: drop unnecessary blk_get/put_queue() in scsi_cmd_ioctl() and blk_get_tg() block: pass around REQ_* flags instead of broken down booleans during request alloc/free block: move blk_throtl prototypes to block/blk.h block: fix genhd refcounting in blkio_policy_parse_and_set() ... Fix up trivial conflicts due to "mddev_t" -> "struct mddev" conversion and making the request functions be of type "void" instead of "int" in - drivers/md/{faulty.c,linear.c,md.c,md.h,multipath.c,raid0.c,raid1.c,raid10.c,raid5.c} - drivers/staging/zram/zram_drv.c
2011-11-05ASoC: Ensure we get an impedence reported for WM8958 jack detectMark Brown1-0/+15
Occasionally we may see an accessory reported before we have a stable impedance for the accessory. If this happens then reread the status in order to ensure that the handler can take the appropriate action for the status change. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-05bonding: comparing a u8 with -1 is always falseDan Carpenter1-0/+2
slave->duplex is a u8 type so the in bond_info_show_slave() when we check "if (slave->duplex == -1)", it's always false. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-05netlink: clarify attribute length check documentationJohannes Berg1-2/+9
The documentation for how the length of attributes is checked is wrong ("Exact length" isn't true, the policy checks are for "minimum length") and a bit misleading. Make it more complete and explain what really happens. Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-05PM / Freezer: Reimplement wait_event_freezekillable using ↵Oleg Nesterov1-8/+3
freezer_do_not_count/freezer_count Commit 27920651fe "PM / Freezer: Make fake_signal_wake_up() wake TASK_KILLABLE tasks too" updated fake_signal_wake_up() used by freezer to wake up KILLABLE tasks. Sending unsolicited wakeups to tasks in killable sleep is dangerous as there are code paths which depend on tasks not waking up spuriously from KILLABLE sleep. For example. sys_read() or page can sleep in TASK_KILLABLE assuming that wait/down/whatever _killable can only fail if we can not return to the usermode. TASK_TRACED is another obvious example. The offending commit was to resolve freezer hang during system PM operations caused by KILLABLE sleeps in network filesystems. wait_event_freezekillable(), which depends on the spurious KILLABLE wakeup, was added by f06ac72e92 "cifs, freezer: add wait_event_freezekillable and have cifs use it" to be used to implement killable & freezable sleeps in network filesystems. To prepare for reverting of 27920651fe, this patch reimplements wait_event_freezekillable() using freezer_do_not_count/freezer_count() so that it doesn't depend on the spurious KILLABLE wakeup. This isn't very nice but should do for now. [tj: Refreshed patch to apply to linus/master and updated commit description on Rafael's request.] Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-11-05PM / OPP: Fix build when CONFIG_PM_OPP is not setTony Lindgren1-2/+2
Commit 03ca370fbf7b76d6d002380dbdc2cdc2319f9c80 (PM / OPP: Add OPP availability change notifier) does not compile if CONFIG_PM_OPP is not set: arch/arm/plat-omap/omap-pm-noop.o: In function `opp_get_notifier': include/linux/opp.h:103: multiple definition of `opp_get_notifier' include/linux/opp.h:103: first defined here Also fix incorrect comment. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-07 17:07:48 +0300